POLYMER DATA HANDBOOK *Home *Browse/Search Contents *Browse by Polymer Class *Browse the Index *Online help
Copyright © 1999 by Oxford University Press, Inc.
User's Guide
EDITED BY JAMES E. MARK, UNIVERSITY OF CINCINNATI PUBLISHED BY OXFORD UNIVERSITY PRESS The online version of the Polymer Data Handbook includes key data on over two hundred polymers. Please note that entries are presented as PDF files and can only be read using Adobe Acrobat Reader Version 3. If you do not have the freeware reader, it can be downloaded from Adobe in the United States or Adobe in the United Kingdom. Each entry opens with a citation of the contributor's name and notations of acronyms and trade names, class of polymer, structure, and major applications. These are followed by tabular displays showing the properties of each polymer. The maximum consistency possible has been established for properties presented with regard to format, terminology, notations, and units. However, not all properties are applicable to all polymers contained in the handbook; some properties may not even be relevant for certain polymer classes. Also, some polymers exhibit properties shown by few others (e.g., electroluminescence); these properties have been noted as "Properties of Special Interest." Each entry closes with a list of references for the reader interested in further investigation of a polymer. View the editor's preface to the print edition (HTML format). View the directory of contributors (PDF format).
file:///F|/Temp_temp/guide.htm7/16/2005 7:02:20 PM
Preface
PREFACE TO THE PRINT EDITION The Polymer Data Handbook offers, in a standardized and readily accessible tabular format, concise information on the syntheses, structures, properties, and applications of the most important polymeric materials. Those included are currently in industrial use or they are under study for potential new applications in industry and in academic laboratories. Considerable thought was given to the criteria for selecting the polymers included in this volume. The first criterion was current commercial importance—the use of the polymer in commercial materials—for example, as a thermoplastic, a thermoset, or an elastomer. The second criterion was novel applications—a polymer that is promising for one or more purposes but not yet of commercial importance—for example, because of its electrical conductivities, its nonlinear optical properties, or its suitability as a preceramic polymer. The hope is that some readers will become interested enough in these newer materials to contribute to their further development and characterization. Finally, the handbook includes some polymers simply because they are unusually interesting—for example, those utilized in fundamental studies of the effects of chain stiffness, self-assembly, or biochemical processes. Based on these three criteria, more than two hundred polymers were chosen for inclusion in this work. The properties presented for each polymer include some of great current interest, such as surface and interfacial properties, pyrolyzability, electrical conductivity, nonlinear optical properties, and electroluminescence. Not all the properties are available for all the polymers included, and some properties may not even be relevant for certain polymer classes. Some polymers exhibit properties shown by few others—such as electroluminescence—and those have been presented as "Properties of Special Interest." The handbook entries were written by authors carefully chosen for their recognized expertise in their specific polymers. The authors were asked to be highly selective, to choose and document those results that they considered to have the highest relevance and reliability. All the entries were then reviewed carefully by one or more referees, to ensure the highest quality and significance. Care was taken to achieve maximum consistency between entries, especially with regard to terminology, notations, and units. The goal was to facilitate searches in the printed version of the handbook and electronically on the online site. Grateful acknowledgment is made here to the important contributions of the anonymous referees. It is also my real pleasure to thank a number of people at Oxford University Press for their help: specifically, Robert L. Rogers and Sean Pidgeon contributed greatly to the initiation and formulation of the basic structure of the handbook, and Matthew Giarratano carried out its implementation. It is appropriate here to thank my wife Helen for the kind of support, tangible and intangible, that makes an intimidating project, like this one, doable and sometimes even a pleasant experience. James E. Mark University of Cincinnati October 1998
file:///F|/Temp_temp/preface.htm7/16/2005 7:02:20 PM
Browse/Search Contents
BROWSE/SEARCH CONTENTS To find a material of interest, search this page using your browser's search/find option, or use the alphabetical browser. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Click on the material to view the full text of that entry in PDF format. To view the PDF files, you must have Adobe Acrobat Reader Version 3 installed on your computer. If you do not have the freeware reader, it can be downloaded from Adobe in the United States or Adobe in the United Kingdom. Acrylonitrile-butadiene elastomers Alkyd resins Amino resins Amylopectin Amylose Bisphenol-A polysulfone Carborane-containing polymers Carboxylated ethylene copolymers, metal salts (ionomers) Cellulose Cellulose acetate Cellulose butyrate Cellulose nitrate Chitin Collagen Elastic, plastic, and hydrogel-forming protein-based polymers file:///F|/Temp_temp/contents.htm (1 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Epoxy resins Ethylcellulose Ethylene-propylene-diene monomer elastomers Ethylene-vinyl acetate copolymer Ethylene-vinyl alcohol copolymer Fullerene-containing polymers Gelatin Glycogen Hydridopolysilazane Hydroxypropylcellulose Kevlar Kraton D1100 SBS Kraton G1600 SEBS Metallophthalocyanine polymers Nylon 3 Nylon 4,6 Nylon 6 Nylon 6 copolymer Nylon 6,6 Nylon 6,6 copolymer Nylon 6,10
file:///F|/Temp_temp/contents.htm (2 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Nylon 6,12 Nylon 11 Nylon 12 Nylon MXD6 Perfluorinated ionomers Phenolic resins Polyacetylene Polyacrylamide Poly(acrylic acid) Poly(acrylonitrile) Poly(L-alanine) Poly(amide imide) Poly(amidoamine) dendrimers Polyaniline Poly(aryloxy)thionylphosphazenes Poly(p-benzamide) Poly(benzimidazole) Poly(benzobisoxazole) Poly(benzobisthiazole) Poly(gamma-benzyl-L-glutamate) Poly(1,3-bis-p-carboxyphenoxypropane anhydride)
file:///F|/Temp_temp/contents.htm (3 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Poly(bis maleimide) 1,2-Polybutadiene cis-1,4-Polybutadiene trans-1,4-Polybutadiene Poly(butene-1) Poly[(n-butylamino)thionylphosphazene] Poly(butylene terephthalate) Poly(n-butyl isocyanate) Poly(epsilon-caprolactone) Polycarbonate Polychloral Polychloroprene Poly(p-chlorostyrene) Poly(chlorotrifluoroethylene) Poly(cyclohexyl methacrylate) Poly(di-n-butylsiloxane) Poly(diethylsiloxane) Poly(di-n-hexylsiloxane) Poly(di-n-hexylsilylene) Poly(dimethylferrocenylethylene) Poly(2,6-dimethyl-1,4-phenylene oxide)
file:///F|/Temp_temp/contents.htm (4 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Poly(dimethylsiloxane) Poly(dimethylsiloxanes), cyclic Poly(dimethylsilylene) Poly(dimethylsilylene-co-phenylmethylsilylene) Poly(1,3-dioxepane) Poly(1,3-dioxolane) Poly(di-n-pentylsiloxane) Poly(diphenylsiloxane) Poly(di-n-propylsiloxane) Poly(epichlorohydrin) Poly(erucic acid dimer anhydride) Polyesters, unsaturated Poly(ether ether ketone) Poly(ether imide) Poly(ether ketone) Poly(ether sulfone) Poly(ethyl acrylate) Polyethylene, elastomeric (very highly branched) Poly(ethylene imine) Polyethylene, linear high-density Polyethylene, linear low-density
file:///F|/Temp_temp/contents.htm (5 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Polyethylene, low-density Polyethylene, metallocene linear low-density Poly(ethylene-2,6-naphthalate) Poly(ethylene oxide) Poly(ethylene sulfide) Poly(ethylene terephthalate) Poly(ferrocenyldimethylsilane) Polygermanes Polyglycine Poly(glycolic acid) Poly(hexene-1) Poly(n-hexyl isocyanate) Poly(hydridosilsesquioxane) Poly(4-hydroxy benzoic acid) Poly(hydroxybutyrate) Poly(2-hydroxyethyl methacrylate) Poly(isobutylene), butyl rubber, halobutyl rubber cis-1,4-Polyisoprene trans-1,4-Polyisoprene Poly(N-isopropyl acrylamide) Poly(lactic acid)
file:///F|/Temp_temp/contents.htm (6 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Polymeric selenium Polymeric sulfur Poly(methacrylic acid) Poly(methyl acrylate) Poly(methylacrylonitrile) Poly(N-methylcyclodisilazane) Poly(methylene oxide) Poly(methyl methacrylate) Poly(4-methyl pentene-1) Poly(methylphenylsiloxane) Poly(methylphenylsilylene) Poly(methylsilmethylene) Poly(methylsilsesquioxane) Poly(alpha-methylstyrene) Poly(p-methylstyrene) Poly(methyltrifluoropropylsiloxane) Poly(norbornene) Polyoctenamer Polypentenamer Poly(1,4-phenylene) Poly(m-phenylene isophthalamide)
file:///F|/Temp_temp/contents.htm (7 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Poly(p-phenylene oxide) Poly(p-phenylene sulfide) Poly(1,4-phenylene vinylene) Poly(alpha-phenylethyl isocyanide) Poly(phenylmethylsiloxanes), cyclic Poly(phenylsilsesquioxane) Poly(phenyl/tolylsiloxane) Polyphosphates Poly(phosphazene), bioerodible Poly(phosphazene) elastomer Poly(phosphazene), semicrystalline Poly(phosphonate) Polypropylene, atactic Polypropylene, elastomeric (stereoblock) Polypropylene, isotactic Poly(propylene oxide) Poly(propylene sulfide) Polypropylene, syndiotactic Poly(pyromellitimide-1,4-diphenyl ether) Polypyrrole Polyquinoline
file:///F|/Temp_temp/contents.htm (8 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Poly(rotaxane), example 1 Poly(rotaxane), example 2 Poly(silphenylene-siloxanes) Poly(silylenemethylene) Polystyrene Polystyrene, head-to-head Poly(sulfur nitride) Poly(tetrafluoroethylene) Poly(tetrahydrofuran) Polythiophene Poly(1,3-trimethyleneimine) dendrimers Poly(trimethylene oxide) Poly[1-(trimethylsilyl)-1-propyne] Polyurea Polyurethane Polyurethane elastomers Polyurethane urea Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(N-vinyl carbazole)
file:///F|/Temp_temp/contents.htm (9 of 10)7/16/2005 7:02:22 PM
Browse/Search Contents
Poly(vinyl chloride) Poly(vinyl chloride), head-to-head Poly(vinylferrocene) Poly(vinyl fluoride) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl methyl ether) Poly(vinylmethylsiloxanes), cyclic Poly(4-vinyl pyridine) Poly(N-vinyl pyrrolidone) Poly(p-xylylene) Silicon (germanium) oxo hemiporphyrazine polymers Silk protein Starch Styrene-acrylonitrile Styrene-butadiene elastomers Styrene-methylmethacrylate copolymer Sulfo-ethylene-propylene-diene monomer ionomers Syndiotactic polystyrene Vinylidene fluoride–hexafluoropropylene elastomers
file:///F|/Temp_temp/contents.htm (10 of 10)7/16/2005 7:02:22 PM
Class
BROWSE BY POLYMER CLASS To find a material of interest, search this page using your browser's search/find option, or select a class of polymer. Then click on the material to view the full text of that entry in PDF format. To view the PDF files, you must have Adobe Acrobat Reader Version 3 installed on your computer. If you do not have the freeware reader, it can be downloaded from Adobe in the United States or Adobe in the United Kingdom. Acrylic polymers Addition polyimides Aliphatic polyamides Aliphatic polyesters Aromatic nylons Aromatic polyamides Cage structure polymers Carbohydrate polymers Chemical copolymers Chiral aliphatic polyesters Cofacial polymers Composite matrix resins Conjugated and other unsaturated polymers Conjugated conducting polymers Cyclic polymers D -carborane siloxanes n
Dendrimers Dendritic polymers Dendrons Diene elastomers Di-methyl silicones and siloxanes Electrically conductive polymers Engineering thermoplastics Ethylene copolymers Fluoroelastomers Homopolymers Inorganic and semi-inorganic polymers N-substituted 1-nylons Polyacetals Polyamines Polyanhydrides Polyaromatics Polycarbosilanes Polyesters Polyethers Poly(ether sulfones) Polyformals Polyheterocyclics Poly(alpha-hydroxy esters) Polyimides Poly(isocyanates) file:///F|/Temp_temp/class.htm (1 of 18)7/16/2005 7:09:02 PM
Class
Poly(isocyanides) Polyketones Polynitriles Polyolefin copolymers Poly(alpha-olefins) Polypeptides and proteins Polyphosphazenes Polysaccharides Polysilanes Polysilazanes Polysiloxanes Polysulfides Polyureas Polyurethanes Rigid-rod polymers Saturated thermoplastic elastomers Siloxane ladder polymers Thermoplastics Thermoset polymers Thermoset resins Unsaturated thermoplastic elastomers Vinyl polymers Vinylidene polymers
Acrylic polymers Poly(acrylonitrile) Poly(methyl methacrylate)
Addition polyimides Poly(bis maleimide)
Aliphatic polyamides Nylon 3 Nylon 4,6 Nylon 6 Nylon 6 copolymer Nylon 6,6
file:///F|/Temp_temp/class.htm (2 of 18)7/16/2005 7:09:02 PM
Class
Nylon 6,10 Nylon 6,12 Nylon 11 Nylon 12 Nylon MXD6
Aliphatic polyesters Poly(epsilon-caprolactone) Poly(hydroxybutyrate)
Aromatic nylons Nylon 6,6 copolymer
Aromatic polyamides Kevlar Nylon 6,6 copolymer Poly(p-benzamide) Poly(m-phenylene isophthalamide)
Cage structure polymers Carborane-containing polymers Fullerene-containing polymers
Carbohydrate polymers
file:///F|/Temp_temp/class.htm (3 of 18)7/16/2005 7:09:02 PM
Class
Amylopectin Amylose Cellulose Cellulose acetate Cellulose butyrate Cellulose nitrate Chitin Ethylcellulose Glycogen Hydroxypropylcellulose Starch
Chemical copolymers Acrylonitrile-butadiene elastomers Amino resins Carboxylated ethylene copolymers, metal salts (ionomers) Ethylene-propylene-diene monomer elastomers Ethylene-vinyl acetate copolymer Ethylene-vinyl alcohol copolymer Kraton D1100 SBS Kraton G1600 SEBS Perfluorinated ionomers
file:///F|/Temp_temp/class.htm (4 of 18)7/16/2005 7:09:02 PM
Class
Phenolic resins Polystyrene, head-to-head Poly(vinyl chloride), head-to-head Styrene-acrylonitrile Styrene-butadiene elastomers Styrene-methylmethacrylate copolymer Sulfo-ethylene-propylene-diene monomer ionomers Vinylidene fluoride–hexafluoropropylene elastomers
Chiral aliphatic polyesters Poly(hydroxybutyrate)
Cofacial polymers Metallophthalocyanine polymers Silicon (germanium) oxo hemiporphyrazine polymers
Composite matrix resins Poly(bis maleimide)
Conjugated and other unsaturated polymers Polyacetylene Polyaniline Poly[1-(trimethylsilyl)-1-propyne]
file:///F|/Temp_temp/class.htm (5 of 18)7/16/2005 7:09:02 PM
Class
Conjugated conducting polymers Polypyrrole Polythiophene
Cyclic polymers Poly(dimethylsiloxanes), cyclic Poly(phenylmethylsiloxanes), cyclic Poly(rotaxane), example 1 Poly(rotaxane), example 2 Poly(vinylmethylsiloxanes), cyclic
D -carborane siloxanes n
Carborane-containing polymers
Dendrimers Poly(amidoamine) dendrimers Poly(1,3-trimethyleneimine) dendrimers
Dendritic polymers Poly(amidoamine) dendrimers Poly(1,3-trimethyleneimine) dendrimers
Dendrons Poly(amidoamine) dendrimers
file:///F|/Temp_temp/class.htm (6 of 18)7/16/2005 7:09:02 PM
Class
Diene elastomers 1,2-Polybutadiene cis-1,4-Polybutadiene trans-1,4-Polybutadiene Polychloroprene cis-1,4-Polyisoprene trans-1,4-Polyisoprene Poly(norbornene) Polyoctenamer Polypentenamer
Di-methyl silicones and siloxanes Poly(dimethylsiloxane) Poly(dimethylsiloxanes), cyclic
Electrically conductive polymers Polyaniline
Engineering thermoplastics Poly(amide imide) Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(ether imide) Poly(methylene oxide)
file:///F|/Temp_temp/class.htm (7 of 18)7/16/2005 7:09:02 PM
Class
Ethylene copolymers Carboxylated ethylene copolymers, metal salts (ionomers)
Fluoroelastomers Vinylidene fluoride–hexafluoropropylene elastomers
Homopolymers Poly(N-vinyl carbazole) Poly(4-vinyl pyridine) Poly(N-vinyl pyrrolidone)
Inorganic and semi-inorganic polymers Poly[(n-butylamino)thionylphosphazene] Poly(dimethylferrocenylethylene) Poly(ferrocenyldimethylsilane) Polygermanes Polymeric selenium Polymeric sulfur Polyphosphates Poly(phosphonate) Poly(sulfur nitride) Poly(vinylferrocene)
file:///F|/Temp_temp/class.htm (8 of 18)7/16/2005 7:09:02 PM
Class
N-substituted 1-nylons Poly(n-butyl isocyanate) Poly(n-hexyl isocyanate)
Polyacetals Polychloral Poly(1,3-dioxolane) Poly(methylene oxide)
Polyamines Poly(ethylene imine)
Polyanhydrides Poly(1,3-bis-p-carboxyphenoxypropane anhydride) Poly(erucic acid dimer anhydride)
Polyaromatics Poly(1,4-phenylene) Poly(1,4-phenylene vinylene) Polyquinoline Poly(p-xylylene)
Polycarbosilanes Poly(methylsilmethylene)
file:///F|/Temp_temp/class.htm (9 of 18)7/16/2005 7:09:02 PM
Class
Poly(silylenemethylene)
Polyesters Poly(butylene terephthalate) Poly(epsilon-caprolactone) Polycarbonate Polyesters, unsaturated Poly(ethylene-2,6-naphthalate) Poly(ethylene terephthalate) Poly(glycolic acid) Poly(4-hydroxy benzoic acid) Poly(hydroxybutyrate) Poly(lactic acid)
Polyethers Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(epichlorohydrin) Poly(ethylene oxide) Poly(methylene oxide) Poly(p-phenylene oxide) Poly(propylene oxide) Poly(tetrahydrofuran) Poly(trimethylene oxide) file:///F|/Temp_temp/class.htm (10 of 18)7/16/2005 7:09:02 PM
Class
Poly(ether sulfones) Bisphenol-A polysulfone Poly(ether sulfone)
Polyformals Poly(1,3-dioxepane)
Polyheterocyclics Polypyrrole Polyquinoline Polythiophene
Poly(alpha-hydroxy esters) Poly(glycolic acid) Poly(lactic acid)
Polyimides Poly(amide imide) Poly(bis maleimide) Poly(ether imide) Poly(pyromellitimide-1,4-diphenyl ether)
Poly(isocyanates)
file:///F|/Temp_temp/class.htm (11 of 18)7/16/2005 7:09:02 PM
Class
Poly(n-butyl isocyanate) Poly(n-hexyl isocyanate)
Poly(isocyanides) Poly(alpha-phenylethyl isocyanide)
Polyketones Poly(ether ether ketone) Poly(ether ketone)
Polynitriles Poly(methylacrylonitrile)
Polyolefin copolymers Ethylene-propylene-diene monomer elastomers Polyethylene, linear low-density
Poly(alpha-olefins) Poly(butene-1) Polyethylene, elastomeric (very highly branched) Polyethylene, linear high-density Polyethylene, linear low-density Polyethylene, low-density Polyethylene, metallocene linear low-density
file:///F|/Temp_temp/class.htm (12 of 18)7/16/2005 7:09:02 PM
Class
Poly(hexene-1) Poly(4-methyl pentene-1) Polypropylene, atactic Polypropylene, elastomeric (stereoblock) Polypropylene, isotactic Polypropylene, syndiotactic Poly(tetrafluoroethylene)
Polypeptides and proteins Collagen Elastic, plastic, and hydrogel-forming protein-based polymers Gelatin Poly(L-alanine) Poly(gamma-benzyl-L-glutamate) Polyglycine Silk protein
Polyphosphazenes Poly(aryloxy)thionylphosphazenes Poly(phosphazene), bioerodible Poly(phosphazene) elastomer Poly(phosphazene), semicrystalline
file:///F|/Temp_temp/class.htm (13 of 18)7/16/2005 7:09:02 PM
Class
Polysaccharides Cellulose Chitin Glycogen
Polysilanes Poly(di-n-hexylsilylene) Poly(dimethylsilylene) Poly(dimethylsilylene-co-phenylmethylsilylene) Poly(methylphenylsilylene)
Polysilazanes Hydridopolysilazane Poly(N-methylcyclodisilazane)
Polysiloxanes Poly(di-n-butylsiloxane) Poly(diethylsiloxane) Poly(di-n-hexylsiloxane) Poly(dimethylsiloxane) Poly(dimethylsiloxanes), cyclic Poly(di-n-pentylsiloxane) Poly(diphenylsiloxane)
file:///F|/Temp_temp/class.htm (14 of 18)7/16/2005 7:09:02 PM
Class
Poly(di-n-propylsiloxane) Poly(hydridosilsesquioxane) Poly(methylphenylsiloxane) Poly(methylsilsesquioxane) Poly(methyltrifluoropropylsiloxane) Poly(phenylsilsesquioxane) Poly(phenyl/tolylsiloxane) Poly(silphenylene-siloxanes)
Polysulfides Poly(ethylene sulfide) Poly(p-phenylene sulfide) Poly(propylene sulfide)
Polyureas Polyurea
Polyurethanes Polyurethane Polyurethane elastomers Polyurethane urea
Rigid-rod polymers Poly(benzimidazole)
file:///F|/Temp_temp/class.htm (15 of 18)7/16/2005 7:09:02 PM
Class
Poly(benzobisoxazole) Poly(benzobisthiazole)
Saturated thermoplastic elastomers Kraton G1600 SEBS
Siloxane ladder polymers Poly(hydridosilsesquioxane) Poly(methylsilsesquioxane) Poly(phenylsilsesquioxane)
Thermoplastics Epoxy resins Poly(amide imide) Poly(butylene terephthalate) Poly(epsilon-caprolactone) Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(ether imide) Poly(ethylene-2,6-naphthalate) Poly(ethylene terephthalate) Poly(methylene oxide) Poly(p-phenylene oxide)
Thermoset polymers file:///F|/Temp_temp/class.htm (16 of 18)7/16/2005 7:09:02 PM
Class
Alkyd resins Amino resins Epoxy resins Phenolic resins Poly(bis maleimide) Polyesters, unsaturated
Thermoset resins Poly(bis maleimide)
Unsaturated thermoplastic elastomers Kraton D1100 SBS
Vinyl polymers Polyacrylamide Poly(acrylic acid) Poly(p-chlorostyrene) Poly(ethyl acrylate) Poly(N-isopropyl acrylamide) Poly(methyl acrylate) Poly(alpha-methylstyrene) Poly(p-methylstyrene) Polystyrene
file:///F|/Temp_temp/class.htm (17 of 18)7/16/2005 7:09:02 PM
Class
Polystyrene, syndiotactic Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(N-vinyl carbazole) Poly(vinyl chloride) Poly(vinyl fluoride) Poly(vinyl methyl ether) Poly(4-vinyl pyridine) Poly(N-vinyl pyrrolidone)
Vinylidene polymers Poly(chlorotrifluoroethylene) Poly(cyclohexyl methacrylate) Poly(2-hydroxyethyl methacrylate) Poly(isobutylene), butyl rubber, halobutyl rubber Poly(methacrylic acid) Poly(methyl methacrylate) Poly(vinylidene chloride) Poly(vinylidene fluoride)
file:///F|/Temp_temp/class.htm (18 of 18)7/16/2005 7:09:02 PM
Alternate
BROWSE THE INDEX To find a material of interest, search this page using your browser's search/find option, or use the alphabetical browser. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Click on the material to view the full text of that entry in PDF format. To view the PDF files, you must have Adobe Acrobat Reader Version 3 installed on your computer. If you do not have the freeware reader, it can be downloaded from Adobe in the United States or Adobe in the United Kingdom. A-C Acetal Aciplex Acrylic polymers Poly(acrylonitrile) Poly(methyl methacrylate) Acrylonitrile-butadiene elastomers Acrysol Acumer Acusol Addition polyimide Advaco AFAX Airco Airvol file:///F|/Temp_temp/alternat.htm (1 of 57)7/16/2005 7:09:07 PM
Alternate
Albigen Alcogum Alcosperse Algoflon Aliphatic polyamides Nylon 3 Nylon 4,6 Nylon 6 Nylon 6 copolymer Nylon 6,6 Nylon 6,10 Nylon 6,12 Nylon 11 Nylon 12 Nylon MXD6 Aliphatic polyesters Poly(epsilon-caprolactone) Poly(hydroxybutyrate) Alkyd resins Altek Ameripol
file:///F|/Temp_temp/alternat.htm (2 of 57)7/16/2005 7:09:07 PM
Alternate
Amilan Amino resins Amoco-AI-10 Amodel Amylopectin Amylose Apical a-PP Aquatreat Araldite Aramid Aramide Aromatic linear polyester Aromatic linear rigid polyester Aromatic nylon Aromatic polyamides Kevlar Nylon 6,6 copolymer Poly(p-benzamide) Poly(m-phenylene isophthalamide) Aromatic polyesters Poly(butylene terephthalate) file:///F|/Temp_temp/alternat.htm (3 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(ethylene-2,6-naphthalate) Poly(ethylene terephthalate) Astramol dendrimers Atactic polypropylene Bakelite Balata Barex (copolymer) Baypren Baysilone M fluid Biodel-CPP Biodel-EAD Biodone Bioerodible poly(phosphazene) Biopol Bisphenol-A polycarbonate Bisphenol-A polysulfone BMI BR Branched PE BrIIR Brominated isobutylene isoprene rubber
file:///F|/Temp_temp/alternat.htm (4 of 57)7/16/2005 7:09:07 PM
Alternate
Butacite Butaclor Butvar Butyl rubber CA Cage structure polymers Carborane-containing polymers Fullerene-containing polymers Capron Carbohydrate polymers Amylopectin Amylose Cellulose Cellulose acetate Cellulose butyrate Cellulose nitrate Chitin Ethylcellulose Glycogen Hydroxypropylcellulose Starch
file:///F|/Temp_temp/alternat.htm (5 of 57)7/16/2005 7:09:07 PM
Alternate
Carbomix Carbopo Carborane-containing polymers Carboxylated ethylene copolymers, metal salts (ionomers) Cargill Cariflex CB CCP Celcon Cellophane Cellulose Cellulose acetate Cellulose butyrate Cellulose nitrate Chemical copolymers Acrylonitrile-butadiene elastomers Amino resins Carboxylated ethylene copolymers, metal salts (ionomers) Ethylene-propylene-diene monomer elastomers Ethylene-vinyl acetate copolymer Ethylene-vinyl alcohol copolymer Kraton D1100 SBS file:///F|/Temp_temp/alternat.htm (6 of 57)7/16/2005 7:09:07 PM
Alternate
Kraton G1600 SEBS Perfluorinated ionomers Phenolic resins Polystyrene, head-to-head Poly(vinyl chloride), head-to-head Styrene-acrylonitrile Styrene-butadiene elastomers Styrene-methylmethacrylate copolymer Sulfo-ethylene-propylene-diene monomer ionomers Vinylidene fluoride–hexafluoropropylene elastomers Chemigum Chiral aliphatic polyester Chitin Chlorinated isobutylene isoprene rubber Chlorinated PBD rubber Chloroprene rubber Chloroprene p-CISt p-CIST Cl-cis-PBD Cl-trans-PBD
file:///F|/Temp_temp/alternat.htm (7 of 57)7/16/2005 7:09:07 PM
Alternate
Clarene ClIIR CLPHS CN Cofacial polymers Metallophthalocyanine polymers Silicon (germanium) oxo hemiporphyrazine polymers Collagen Composite matrix resin Conjugated and other unsaturated polymers Polyacetylene Polyaniline Poly[1-(trimethylsilyl)-1-propyne] Conjugated conducting polymers Polypyrrole Polythiophene Cook Copo CPI CR Crospovidone
file:///F|/Temp_temp/alternat.htm (8 of 57)7/16/2005 7:09:07 PM
Alternate
Crystalor p-CST Cyanamer Cyclic PDMS Cyclic polymers Poly(dimethylsiloxanes), cyclic Poly(phenylmethylsiloxanes), cyclic Poly(rotaxane), example 1 Poly(rotaxane), example 2 Poly(vinylmethylsiloxanes), cyclic Cyclic PPMS Cyclic PVMS Cyclolinear poly(phenylsiloxane) Cymel D -carborane siloxanes n
Dacron Daiamid Dai-el Darex Delrin Dendrimers
file:///F|/Temp_temp/alternat.htm (9 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(amidoamine) dendrimers Poly(1,3-trimethyleneimine) dendrimers Dendritic polymers Poly(amidoamine) dendrimers Poly(1,3-trimethyleneimine) dendrimers Dendron DER Dexon Dexsil DIC-PPS Diene elastomers 1,2-Polybutadiene cis-1,4-Polybutadiene trans-1,4-Polybutadiene Polychloroprene cis-1,4-Polyisoprene trans-1,4-Polyisoprene Poly(norbornene) Polyoctenamer Polypentenamer Dimethicone Di-methyl silicones and siloxanes file:///F|/Temp_temp/alternat.htm (10 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(dimethylsiloxane) Poly(dimethylsiloxanes), cyclic Dion Divergan Dow Corning 200 fluid Dow Corning 710 fluid Duolite Duradene Durez Duroflex Eastoflex Ebonite EC Ekonol Elastic, plastic, and hydrogel-forming protein-based polymers Elastic protein-based polymers Elastomeric polyethylene (very highly branched) Elastomeric poly(phosphazene) Elastomeric polypropylene (stereoblock) Electrically conductive polymer elPP
file:///F|/Temp_temp/alternat.htm (11 of 57)7/16/2005 7:09:07 PM
Alternate
ELPP Elvanol Elvax Emeraldine Engineering thermoplastics Poly(amide imide) Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(ether imide) Poly(methylene oxide) EP EPDM EPDM rubber derivative Epi-Cure Epikote Epi-Res EPM Epon Epotuf Epoxy resins EPR (as copolymer) Ethene- propene-diene elastomers
file:///F|/Temp_temp/alternat.htm (12 of 57)7/16/2005 7:09:07 PM
Alternate
Ethylcellulose Ethylene copolymer Ethylene copolymer, homogeneous Ethylene copolymer, ultra-low-density Ethylene-propylene-diene monomer elastomers Ethylene-vinyl acetate copolymer Ethylene-vinyl alcohol copolymer EVA Ethylene-vinyl acetate copolymer Ethylene-vinyl alcohol copolymer Eval EYPEL-F Fenilin Fibroin Flemion Flexible linear aliphatic polyester Flexible linear aromatic polyester Floraflon Fluon Fluorel Fluoroelastomer Fluoroplast file:///F|/Temp_temp/alternat.htm (13 of 57)7/16/2005 7:09:07 PM
Alternate
Fluorosilicone Fortron FOx FS Fullerene-containing polymers Gantrez M Gelatin Gelvatol Gentro Geon GL Glaskyd Glass resin Poly(methylsilsesquioxane) Poly(phenylsilsesquioxane) Glycogen Gohsenol Good-ritel Grilamid GR-M Gutta percha
file:///F|/Temp_temp/alternat.htm (14 of 57)7/16/2005 7:09:07 PM
Alternate
Halobutyl rubber Halon p-Halostyrene HBPSE HDPE Hetron Hevea H-H polystyrene H-H PS H-H PVC HH PVC High-density linear polyethylene High-performance polymer High-pressure PE Homogeneous ethylene copolymers Homopolymers Poly(N-vinyl carbazole) Poly(4-vinyl pyridine) Poly(N-vinyl pyrrolidone) Hostaflon HPC
file:///F|/Temp_temp/alternat.htm (15 of 57)7/16/2005 7:09:07 PM
Alternate
HPCS HPZ HSQ Humex Hycar Hydridopolycarbosilane Hydridopolysilazane Hydridosilsesquioxane Hydrogel-forming protein-based polymers Hydrogen silsesquioxane Hydron Hydroxypropylcellulose IIR In-chain modified polysiloxane Inorganic and semi-inorganic polymers Poly[(n-butylamino)thionylphosphazene] Poly(dimethylferrocenylethylene) Poly(ferrocenyldimethylsilane) Polygermanes Polymeric selenium Polymeric sulfur Polyphosphates file:///F|/Temp_temp/alternat.htm (16 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(phosphonate) Poly(sulfur nitride) Poly(vinylferrocene) IR Isobutylene isoprene rubber Isotactic polypropylene JSR Acrylonitrile-butadiene elastomers Styrene-butadiene elastomers Kadel Kapton Kel-F 81 Kevlar KF Kollidon Kraton D1100 SBS Kraton G1600 SEBS Krynac Kynar Ladder coat LDPE
file:///F|/Temp_temp/alternat.htm (17 of 57)7/16/2005 7:09:07 PM
Alternate
Leucoemeraldine Levapren Levasint Lexan Linear aliphatic flexible polyester Linear aromatic polyester Linear aromatic rigid polyester Linear flexible aromatic polyester Linear high-density polyethylene Linear low-density polyethylene Linear low-density polyethylene, metallocene Linear styrene-butadiene-styrene triblock copolymer Linear styrene-(ethylene-butylene)-styrene triblock copolymer LLDPE LLDPE, single site catalyzed Low-density linear metallocene polyethylene Low-density linear polyethylene Low-density polyethylene Low-pressure PE Low swell LPE
file:///F|/Temp_temp/alternat.htm (18 of 57)7/16/2005 7:09:07 PM
Alternate
LPHSQ LS Lucite Lustran Lutonal M Luvican Luviskol Makrolon Maranyl Melamines Metallocene linear low-density polyethylene Metallocene PE Metallophthalocyanine polymers Methylphenyl silicone oil Methylsilicone oil Methyl-T Microthene mLLDPE MN Modic Molecular bracelet
file:///F|/Temp_temp/alternat.htm (19 of 57)7/16/2005 7:09:07 PM
Alternate
Molecular necklace Movital Mowiol 4MS p-MS MST Nafion Natsyn Natural rubber NBR Neoflon Neoprene Nipol Acrylonitrile-butadiene elastomers Styrene-butadiene elastomers NK Nomex Norsorex Novatec Novolacs NR N-substituted 1-nylons file:///F|/Temp_temp/alternat.htm (20 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(n-butyl isocyanate) Poly(n-hexyl isocyanate) Nylatron Nylon 2 Nylon 3 Nylon 4,6 Nylon 6 Nylon 6 copolymer Nylon 6,6 Nylon 6,6 copolymer Nylon 6/6T Nylon 6,10 Nylon-610 Nylon 6,12 Nylon 11 Nylon 12 Nylon MXD6 Nysyn OCF ODA-PMDA PA-6
file:///F|/Temp_temp/alternat.htm (21 of 57)7/16/2005 7:09:07 PM
Alternate
PA-11 PA 12 PA 610 PA-610 PAA PAAc PAAm PAI PAMAM dendrons and dendrimers PAMS PANI Paracril Parylene N PATP PB PBA PBD PBFP PBI PBIC PBLG
file:///F|/Temp_temp/alternat.htm (22 of 57)7/16/2005 7:09:07 PM
Alternate
PBO PBT Poly(benzobisthiazole) Poly(butylene terephthalate) PBTFP PBZI PBZT PC Polycarbonate Poly(methylsilmethylene) PCHMA PCL PCS Poly(p-chlorostyrene) Poly(methylsilmethylene) PCTFE PDBuS PDES PDHeS PDHS PDMS Poly(dimethylsiloxane) file:///F|/Temp_temp/alternat.htm (23 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(dimethylsilylene) PDMS, cyclic PDPeS PDPrS PDPS PDX PDXL PDXP PE PE, branched PE, high-pressure PE, low-pressure PEA PECH Pedigree PEEK PEI Poly(ether imide) Poly(ethylene imine) PEK PEN
file:///F|/Temp_temp/alternat.htm (24 of 57)7/16/2005 7:09:07 PM
Alternate
PEO Perbunan C Peregal Perfluorinated ionomers Pernigraniline PES Poly(ether sulfone) Poly(ethylene sulfide) PET PF PFPN PGA PHB P(3HB) PHBA PHE PHEMA Phenolic resins Phenyl silicobenzoic anhydride Phenyl siliconic anhydride Phenyl-T PHEX file:///F|/Temp_temp/alternat.htm (25 of 57)7/16/2005 7:09:07 PM
Alternate
PHIC PIB Pioester cis -PIP trans-PIP PLA Plasdone Plaskon Plastic protein-based polymers Plexiglas Plioflex Pliolite PLOS PMA Poly(methacrylic acid) Poly(methyl acrylate) PMAA PMAN PMBD PMDA-ODA PpMeS
file:///F|/Temp_temp/alternat.htm (26 of 57)7/16/2005 7:09:07 PM
Alternate
PpMeS PMMA PMP P4MPE PMPS Poly(methylphenylsiloxane) Poly(methylphenylsilylene) PMS P(alpha)MS PpMS P-pMS P4MS PMSQ PNF elastomer PNIPA PNIPAAm POE Polyacetals Polychloral Poly(1,3-dioxolane) Poly(methylene oxide)
file:///F|/Temp_temp/alternat.htm (27 of 57)7/16/2005 7:09:07 PM
Alternate
Polyacetylene Polyacrylamide Poly(acrylic acid) Poly(acrylonitrile) Poly(L-alanine) Poly(aldehyde) Polyamide 12 Poly(amide imide) Polyamides, aliphatic Nylon 3 Nylon 4,6 Nylon 6 Nylon 6 copolymer Nylon 6,6 Nylon 6,10 Nylon 6,12 Nylon 11 Nylon 12 Nylon MXD6 Polyamides, aromatic Kevlar Nylon 6,6 copolymer file:///F|/Temp_temp/alternat.htm (28 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(p-benzamide) Poly(m-phenylene isophthalamide) Poly(amidoamine) dendrimers Polyamine Polyanhydrides Poly(1,3-bis-p-carboxyphenoxypropane anhydride) Poly(erucic acid dimer anhydride) Polyaniline Polyaramid Polyaramide Polyaromatics Poly(1,4-phenylene) Poly(1,4-phenylene vinylene) Polyquinoline Poly(p-xylylene) Poly(aryloxy)thionylphosphazenes Poly(p-benzamide) Poly(benzimidazole) Poly(benzobisoxazole) Poly[(benzo[1,2-d:5,4-d']bisoxazole-2,6-diyl)-1,4-phenylene] Poly(benzobisthiazole)
file:///F|/Temp_temp/alternat.htm (29 of 57)7/16/2005 7:09:07 PM
Alternate
Poly[(benzo[1,2-d:4,5-d']bisthiazole-2,6-diyl)-1,4-phenylene] Poly(gamma-benzyl-L-glutamate) Poly(1,3-bis-p-carboxyphenoxypropane anhydride) Poly(bis maleimide) Polybutadiene 1,2-Polybutadiene cis-1,4-Polybutadiene trans-1,4-Polybutadiene 1,2-Polybutadiene cis-1,4-Polybutadiene trans-1,4-Polybutadiene Polybutene Poly(butene-1) Poly[(n-butylamino)thionylphosphazene] Polybutylene Poly(butylene terephthalate) Poly(n-butyl isocyanate) Poly-(epsilon)-caproamide Poly(epsilon-caprolactone) Polycarbonate Polycarbonate, bisphenol-A Polycarbosilanes file:///F|/Temp_temp/alternat.htm (30 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(methylsilmethylene) Poly(silylenemethylene) Polychloral Poly(2-chloro-1,3-butadiene) Poly(1-chloro-1-butenylene) Polychloroprene Poly(p-chlorostyrene) Poly(chlorotrifluoroethylene) Polyclar Poly(CPP) Poly(CPP-SA) Poly(cyclohexyl methacrylate) Poly(1,3-cyclopentylenevinylene) Poly(di-n-butylsiloxane) Poly(diethylsiloxane) Polydi-n-hexylsilane Poly(di-n-hexylsiloxane) Poly(di-n-hexylsilylene) Poly(dimethylferrocenylethylene) Poly(2,6-dimethyl-1,4-phenylene oxide) Polydimethylsilane
file:///F|/Temp_temp/alternat.htm (31 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(dimethylsiloxane) Poly(dimethylsiloxanes), cyclic Poly(dimethylsilylene) Poly(dimethylsilylene-co-phenylmethylsilylene) Poly(1,3-dimethyl-2,2,4,4-tetramethylcyclodisilazane) Poly(1,3-dioxepane) Poly(1,3-dioxolane) Poly(di-n-pentylsiloxane) Poly(diphenylsiloxane) Poly(di-n-propylsiloxane) Polydodecanolactam Poly(EAD) Poly(EAD-SA) Poly(epichlorohydrin) Poly(erucic acid dimer anhydride) Polyesters Poly(butylene terephthalate) Poly(epsilon-caprolactone) Polycarbonate Polyesters, unsaturated Poly(ethylene-2,6-naphthalate)
file:///F|/Temp_temp/alternat.htm (32 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(ethylene terephthalate) Poly(glycolic acid) Poly(4-hydroxy benzoic acid) Poly(hydroxybutyrate) Poly(lactic acid) Polyesters, aliphatic Poly(epsilon-caprolactone) Poly(hydroxybutyrate) Polyesters, aromatic Poly(butylene terephthalate) Poly(ethylene-2,6-naphthalate) Poly(ethylene terephthalate) Polyesters, unsaturated Poly(ether ether ketone) Poly(ether imide) Poly(ether ketone) Polyethers Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(epichlorohydrin) Poly(ethylene oxide) Poly(methylene oxide) Poly(p-phenylene oxide) file:///F|/Temp_temp/alternat.htm (33 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(propylene oxide) Poly(tetrahydrofuran) Poly(trimethylene oxide) Poly(ether sulfones) Bisphenol-A polysulfone Poly(ether sulfone) Poly(ethyl acrylate) Polyethylene, elastomeric (very highly branched) Poly(ethylene imine) Polyethylene, linear high-density Polyethylene, linear low-density Polyethylene, low-density Polyethylene, metallocene linear low-density Poly(ethylene-2,6-naphthalate) Poly(ethylene oxide) Poly(ethylene sulfide) Poly(ethylene terephthalate) Poly(ferrocenyldimethylsilane) Polyflon Polyformal Polygermanes
file:///F|/Temp_temp/alternat.htm (34 of 57)7/16/2005 7:09:07 PM
Alternate
Polygermylenes Polyglycine Poly(glycolic acid) Polyheterocyclics Polypyrrole Polyquinoline Polythiophene Poly(hexamethylcyclodisilazane) Poly(hexamethylene adipamide) Poly(hexamethylene decanoamide) Poly(hexamethylene sebacamide) Poly(hexene-1) Poly(n-hexyl isocyanate) Poly(hydridosilsesquioxane) Polyhydrosilsesquoxane Poly(4-hydroxy benzoic acid) Poly(hydroxybutyrate) Poly(3-hydroxybutyrate) Poly(alpha-hydroxy esters) Poly(glycolic acid) Poly(lactic acid) Poly(2-hydroxyethyl methacrylate) file:///F|/Temp_temp/alternat.htm (35 of 57)7/16/2005 7:09:07 PM
Alternate
Polyimides Poly(amide imide) Poly(bis maleimide) Poly(ether imide) Poly(pyromellitimide-1,4-diphenyl ether) Poly(iminoadipolyiminohexamethylene) Poly[imino(1,6-dioxohexamethylene) iminohexamethylene] Poly(iminoethylene) Poly(iminohexamethylene-iminosebacoyl) Poly[imino-1,6-hexanediylimino(1,10-dioxo-1,10-decanediyl)] Poly[imino-1,6-hexanediylimino(1,12-dioxo-1,12-dedecanediyl)] Poly(imino-1,4-phenyleneiminocarbonyl-1,4-phenylenecarbonyl) Poly(isobutylene), butyl rubber, halobutyl rubber Poly(isocyanates) Poly(n-butyl isocyanate) Poly(n-hexyl isocyanate) Poly(isocyanide) Poly(isonitrile) cis-1,4-Polyisoprene trans-1,4-Polyisoprene Poly(N-isopropyl acrylamide)
file:///F|/Temp_temp/alternat.htm (36 of 57)7/16/2005 7:09:07 PM
Alternate
Polyketones Poly(ether ether ketone) Poly(ether ketone) Poly(lactic acid) Polylaurolactam Polylite Polymeric selenium Polymeric sulfur Poly(methacrylic acid) Poly(methyl acrylate) Poly(methylacrylonitrile) cis-1,4-Poly(2-methylbutadiene) Poly(N-methylcyclodisilazane) Poly(methylene oxide) Poly(methyl methacrylate) Polymethylpentene Poly(4-methyl pentene-1) Polymethylphenylsilane Poly(methylphenylsiloxane) Poly(methylphenylsilylene) Poly(methylsilmethylene)
file:///F|/Temp_temp/alternat.htm (37 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(methylsilsesquioxane) Poly(alpha-methylstyrene) Poly(p-methylstyrene) Poly(methyltrifluoropropylsiloxane) Polymide 11 Polynitrile Poly(norbornene) Polyoctenamer Poly(1-octenylene) Polyolefin copolymers Ethylene-propylene-diene monomer elastomers Polyethylene, linear low-density Poly(alpha-olefin copolymer) Polyolefin elastomer Polyolefin plastomers Poly(alpha-olefins) Poly(butene-1) Polyethylene, elastomeric (very highly branched) Polyethylene, linear high-density Polyethylene, linear low-density Polyethylene, low-density Polyethylene, metallocene linear low-density file:///F|/Temp_temp/alternat.htm (38 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(hexene-1) Poly(4-methyl pentene-1) Polypropylene, atactic Polypropylene, elastomeric (stereoblock) Polypropylene, isotactic Polypropylene, syndiotactic Poly(tetrafluoroethylene) Poly[oxy(dimethylsilylene)] Polyoxymethylene Poly[oxy(methylphenylsilylene)] Poly(oxy-1-oxo-3-methyl-trimethylene) Polypentenamer Poly(1-pentenylene) Polypeptides and proteins Collagen Elastic, plastic, and hydrogel-forming protein-based polymers Gelatin Poly(L-alanine) Poly(gamma-benzyl-L-glutamate) Polyglycine Silk protein
file:///F|/Temp_temp/alternat.htm (39 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(1,4-phenylene) Poly(p-phenylene) Poly(p-phenylene-2,6-benzobisthiazolediyl) Poly(p-phenylene-2,6-benzoxazolediyl) Poly[2,2'-(m-phenylene)-5,5'-bibenzimidazole] Poly(m-phenylene isophthalamide) Poly(p-phenylene oxide) Poly(p-phenylene sulfide) Poly(p-phenylene terephthalamide) Poly(1,4-phenylene vinylene) Poly(p-phenylene vinylene) Poly(alpha-phenylethyl isocyanide) Poly(phenylmethylsiloxanes), cyclic Poly(phenylsiloxane), cyclolinear Poly(phenylsilsesquioxane) Poly(phenyl/tolylsiloxane) Polyphosphates Poly(phosphazene), bioerodible Poly(phosphazene) elastomer Poly(phosphazene), semicrystalline Polyphosphazenes
file:///F|/Temp_temp/alternat.htm (40 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(aryloxy)thionylphosphazenes Poly(phosphazene), bioerodible Poly(phosphazene) elastomer Poly(phosphazene), semicrystalline Poly(phosphonate) Polyphthalamide Nylon 6 copolymer Nylon 6,6 copolymer Polypropylene, atactic Polypropylene, elastomeric (stereoblock) Polypropylene, isotactic Poly(propylene oxide) Poly(propylene sulfide) Polypropylene, syndiotactic Polypropylenimine dendrimers Poly(pyromellitimide-1,4-diphenyl ether) Polypyrrole Polyquinoline Poly(rotaxane), example 1 Poly(rotaxane), example 2 Polysaccharides Cellulose file:///F|/Temp_temp/alternat.htm (41 of 57)7/16/2005 7:09:07 PM
Alternate
Chitin Glycogen Polysar S Polysar SS Poly(silaethylene) Polysilanes Poly(di-n-hexylsilylene) Poly(dimethylsilylene) Poly(dimethylsilylene-co-phenylmethylsilylene) Poly(methylphenylsilylene) Polysilastyrene Polysilazanes Hydridopolysilazane Poly(N-methylcyclodisilazane) Polysiloxanes Poly(di-n-butylsiloxane) Poly(diethylsiloxane) Poly(di-n-hexylsiloxane) Poly(dimethylsiloxane) Poly(dimethylsiloxanes), cyclic Poly(di-n-pentylsiloxane)
file:///F|/Temp_temp/alternat.htm (42 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(diphenylsiloxane) Poly(di-n-propylsiloxane) Poly(hydridosilsesquioxane) Poly(methylphenylsiloxane) Poly(methylsilsesquioxane) Poly(methyltrifluoropropylsiloxane) Poly(phenylsilsesquioxane) Poly(phenyl/tolylsiloxane) Poly(silphenylene-siloxanes) Poly(silphenylene-siloxanes) Poly(silylenemethylene) Polystyrene Polystyrene, head-to-head Polystyrene, syndiotactic Polysulfides Poly(ethylene sulfide) Poly(p-phenylene sulfide) Poly(propylene sulfide) Polysulfone, bisphenol-A Poly(sulfur nitride) Poly(tetrafluoroethylene)
file:///F|/Temp_temp/alternat.htm (43 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(tetrahydrofuran) Polythiazyl Poly(thionylphosphazene) Polythiophene Poly[(2,2,2,-trifluoroethoxy)phosphazene] Poly(1,3-trimethyleneimine) dendrimers Poly(trimethylene oxide) Poly[1-(trimethylsilyl)-1-propyne] Polyurea Polyurethane Polyurethane elastomers Polyurethane urea Poly(vdf-hfp) Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(N-vinyl carbazole) Poly(vinyl chloride) Poly(vinyl chloride), head-to-head Poly(vinylferrocene) Poly(vinyl fluoride)
file:///F|/Temp_temp/alternat.htm (44 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinylidene fluoride-co-hexafluoropropylene) Poly(vinyl methyl ether) Poly(vinylmethylsiloxanes), cyclic Poly(4-vinyl pyridine) Poly(N-vinyl pyrrolidone) Poly(p-xylylene) POP POPAM dendrimers Poval Povidone PP PPA PPBA PPE Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(p-phenylene oxide) PPHOS PPMS PPMS, cyclic PPO file:///F|/Temp_temp/alternat.htm (45 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(p-phenylene oxide) Poly(propylene oxide) PPO PPP PPS Poly(p-phenylene sulfide) Poly(phenylsilsesquioxane) Poly(propylene sulfide) PPSQ PPTA PP/TS PPV PPX PPy PQ PR Poly(rotaxane), example 1 Poly(rotaxane), example 2 2-Propenamide homopolymer Protein-based polymers
file:///F|/Temp_temp/alternat.htm (46 of 57)7/16/2005 7:09:07 PM
Alternate
Proteins and polypeptides Collagen Elastic, plastic, and hydrogel-forming protein-based polymers Gelatin Poly(L-alanine) Poly(gamma-benzyl-L-glutamate) Polyglycine Silk protein PS PSE PSF PSM PSS PT PTFE PTFP PTHF PTMO PTMSP PTP PU Polyurea file:///F|/Temp_temp/alternat.htm (47 of 57)7/16/2005 7:09:07 PM
Alternate
Polyurethane Polyurethane elastomers Polyurethane urea PUR Polyurea Polyurethane Polyurethane elastomers PUU PV-116 resin PVA PVAC PVB PVC PVDC PVDF PVF PVF2 PVK PVM PVME PVMS, cyclic
file:///F|/Temp_temp/alternat.htm (48 of 57)7/16/2005 7:09:07 PM
Alternate
PVP Poly(4-vinyl pyridine) Poly(N-vinyl pyrrolidone) P4VP Rayon Regenerated cellulose Reillex Reny Resimene Resoles Rexflex Rextac Rhovinal B Rigid linear aromatic polyester Rigid-rod polymers Poly(benzimidazole) Poly(benzobisoxazole) Poly(benzobisthiazole) Rilsan A Rilsan B Rubber
file:///F|/Temp_temp/alternat.htm (49 of 57)7/16/2005 7:09:07 PM
Alternate
Polychloroprene Poly(isobutylene), butyl rubber, halobutyl rubber cis-1,4-Polyisoprene Ryton Saflex SAN Saran (copolymer) Saturated thermoplastic elastomer SB SBR SCC Semicrystalline poly(phosphazene) Semi-inorganic and inorganic polymers Poly[(n-butylamino)thionylphosphazene] Poly(dimethylferrocenylethylene) Poly(ferrocenyldimethylsilane) Polygermanes Polymeric selenium Polymeric sulfur Polyphosphates Poly(phosphonate) Poly(sulfur nitride) file:///F|/Temp_temp/alternat.htm (50 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(vinylferrocene) SiB Silarylene-siloxane polymers Silicon (germanium) oxo hemiporphyrazine polymers Silk Silk protein Siloxane ladder polymers Poly(hydridosilsesquioxane) Poly(methylsilsesquioxane) Poly(phenylsilsesquioxane) Silphenylenes Single site catalyzed LLDPE Skyprene S'Lec SMMA (SN)
x
Sokalan Solef Solprene Soltex Spectratech
file:///F|/Temp_temp/alternat.htm (51 of 57)7/16/2005 7:09:07 PM
Alternate
Spidroin s-PP sPP SPS Srereon SSC LLDPE Stanyl Starburst dendrons and dendrimers Starch Styrene-acrylonitrile Styrene-butadiene elastomers Styrene-methylmethacrylate copolymer Styrofoam Sulfo-EPDM ionomers Sulfo-ethylene-propylene-diene monomer ionomers SupersoftPP Surlyn Syndiotactic polypropylene Syndiotactic polystyrene Synpol Technyl D
file:///F|/Temp_temp/alternat.htm (52 of 57)7/16/2005 7:09:07 PM
Alternate
Tecnoflon Tedlar PVF film Tedlar SP film Teflon Teijinconex Telene (copolymer) ter-Polymer elastomer Thermoplastics Epoxy resins Kraton D1100 SBS Kraton G1600 SEBS Poly(amide imide) Poly(butylene terephthalate) Poly(epsilon-caprolactone) Poly(2,6-dimethyl-1,4-phenylene oxide) Poly(ether imide) Poly(ethylene-2,6-naphthalate) Poly(ethylene terephthalate) Poly(methylene oxide) Poly(p-phenylene oxide) Thermoplastic saturated elastomer Thermoplastic unsaturated elastomer file:///F|/Temp_temp/alternat.htm (53 of 57)7/16/2005 7:09:07 PM
Alternate
Thermoset polymers Alkyd resins Amino resins Epoxy resins Phenolic resins Poly(bis maleimide) Polyesters, unsaturated Thermoset resin Tohprene TOR Torelina Torlon TP 301 TPX Trosofioil TW241F10 TW300 Tylac Tyril UBE Nylon 12 Udel P1700
file:///F|/Temp_temp/alternat.htm (54 of 57)7/16/2005 7:09:07 PM
Alternate
Udel P3500 Ultem Ultraform Ultra-low-density ethylene copolymer Ultramid Ultramid A Ultramid S Ultramid T Ultrathene Unsaturated polyesters Unsaturated polymers Polyacetylene Polyaniline Poly[1-(trimethylsilyl)-1-propyne] Unsaturated thermoplastic elastomer Urea resins Vespel Vestamid Vestenamer Vestolite Victrex
file:///F|/Temp_temp/alternat.htm (55 of 57)7/16/2005 7:09:07 PM
Alternate
Victrex 100P Victrex 200P Vinoflex Vinol Vinylidene fluoride–hexafluoropropylene elastomers Vinylidene polymers Poly(chlorotrifluoroethylene) Poly(cyclohexyl methacrylate) Poly(2-hydroxyethyl methacrylate) Poly(isobutylene), butyl rubber, halobutyl rubber Poly(methacrylic acid) Poly(methyl methacrylate) Poly(vinylidene chloride) Poly(vinylidene fluoride) Vinylite XYHL Vinyl polymers Polyacrylamide Poly(acrylic acid) Poly(p-chlorostyrene) Poly(ethyl acrylate) Poly(N-isopropyl acrylamide) Poly(methyl acrylate) file:///F|/Temp_temp/alternat.htm (56 of 57)7/16/2005 7:09:07 PM
Alternate
Poly(alpha-methylstyrene) Poly(p-methylstyrene) Polystyrene Polystyrene, syndiotactic Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(N-vinyl carbazole) Poly(vinyl chloride) Poly(vinyl fluoride) Poly(vinyl methyl ether) Poly(4-vinyl pyridine) Poly(N-vinyl pyrrolidone) Vistalon derivative Viton Wacker SWS101 fluid Xarec Zytel
file:///F|/Temp_temp/alternat.htm (57 of 57)7/16/2005 7:09:07 PM
Technical Support
TECHNICAL SUPPORT If you require assistance in using this online application, please send e-mail to:
[email protected].
file:///F|/Temp_temp/tech_support.htm7/16/2005 7:09:08 PM
Legal
OXFORD UNIVERSITY PRESS Oxford New York Athens Auckland Bangkok Bogotá Buenos Aires Calcutta Cape Town Chennai Dar es Salaam Delhi Florence Hong Kong Istanbul Karachi Kuala Lumpur Madrid Melbourne Mexico City Mumbai Nairobi Paris São Paulo Singapore Taipei Tokyo Toronto Warsaw and associated companies in Berlin Ibadan
Copyright © 1999 by Oxford University Press, Inc. Published by Oxford University Press, Inc., 198 Madison Avenue, New York, New York 10016 http://www.oup-usa.org Oxford is a registered trademark of Oxford University Press All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of Oxford University Press.
file:///F|/Temp_temp/legal.htm7/16/2005 7:09:08 PM
Acrylonitrile-butadiene elastomers SHUHONG WANG NBR, Chemigum1 (The Goodyear Tire & Rubber Co.), Hycar1 (BF Goodrich Specialty Chemicals), JSR (Japan Synthetic Rubber Co.), Krynac1 (Bayer AG), NIPOL (Nippon Zeon Co.), Nysyn1 (DSM Copolymer Rubber and Chemical Co.), Paracril1 (Uniroyal Chemical Co.)
ACRONYM, TRADE NAMES
CLASS
Chemical copolymers
STRUCTURE
ÿCH2 ÿCHCHÿCH2 m ÿCH2 ÿCHn ÿ j CN
Hoses where oil, fuel, chemicals, and solutions are transported. Oil-drilling industry. Powder and particulate forms in cements and adhesives. Modi®cation of PVC and ABS to improve impact resistance.
MAJOR APPLICATIONS
Special-purpose, oil-resistant rubbers. Balance of lowtemperature, oil, fuel, and solvent resistance. Good abrasion resistance, gas permeability, and thermal stability. Good strength.
PROPERTIES OF SPECIAL INTEREST
PROPERTY
CONDITIONS
VALUE
REFERENCE
26±27% ACN
0.92
(1)
Glass transition temperature Tg K
20% 30% 34% 40% 48%
213 231 238 255 263
(2)
Service temperature (max)
K
9% N
373
(3)
Solubility parameter
(MPa)1=2
25% ACN, 258C, calc.
18.93
(4)
Theta temperature
K
26% ACN, cyclohexane/MEK (64/36) 293.2 40% ACN, cyclohexane/MEK (52.5/47.5) 295.2
(5)
Density
UNITS
g cm
ÿ3
ACN ACN ACN ACN ACN
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
1
Acrylonitrile-butadiene elastomers Volume swell (%) (Black loaded vulcanizate, 72 h at room temperature, or 1008C with *)
2 Solvent
17% ACN
34% ACN
37% ACN
Lard* Butter fat* Lanolin* Margarine* Stearic acid* Oleic acid Cod liver oil Dehydrogenated corn oil Automobile lube oil (SAEÿ20) Automobile hydraulic ¯uid Jet aircraft fuel 18% aromatic, 28% ole®n 21% aromatic, 0.1% ole®n Ethylene glycol Automobile gasoline Skydrol hydraulic ¯uid Dioctyl phthalate Dibutyl phthalate Tricresyl phosphate Butyl carbitol formal (polyether) Bis(dimethyl benzyl)ether Liquid polyester Triglycol dioctylate Tributoxy ethyl phosphate
18 29 20 24 26 20 5 3 0 8
ÿ2 ÿ3 0 ÿ5 23 3 0 0 0 8
ÿ3 ÿ3 ÿ1.5 ÿ5 ÿ2 0 0 0 0 6
60 38 0 39 112 52 119 50 92 147 ÿ2 83 67
14 9 0 8 59 6 76 21 32 45 0 12 29
11 5 0 6 41 2 52 16 21 29 ÿ3 5 17
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Tensile strength
MPa
Un®lled, vulcanizate (26 27% ACN)
47
(1)
Ultimate elongation
%
Ð
350 800
(1)
PROPERTY
UNITS
VALUES
REFERENCE
ACN % Polymer Mooney
40 60
33 30
33 50
33 70
33 85
27 50
20 40
Tensile strength
MPa
17.9
15.8
16.0
17.6
19.5
14.2
13.4
(6)
Ultimate elongation
%
466
478
433
357
439
334
387
(6)
Modulus, 100% Modulus, 200% Modulus, 300%
MPa MPa MPa
3.6 8.6 13.0
3.1 7.0 10.5
3.2 7.7 11.7
3.9 9.5 14.8
3.5 8.9 14.1
3.7 8.5 12.8
2.9 7.0 10.5
(6) (6) (6)
Hardness
Shore A values
68
67
66
67
66
67
64
(6)
2
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Acrylonitrile-butadiene elastomers PROPERTY
UNITS
ACN % Polymer Mooney
VALUES
40 60
33 30
33 50
33 70
REFERENCE
33 85
27 50
20 40
ÿ9 ÿ25 4
8 ÿ10 4
ÿ1 ÿ21 3
(6) (6) (6)
1 ÿ21 5
16 ÿ10 5
4 ÿ24 5
(6) (6) (6)
6 ÿ18 5 ÿ2.6
13 ÿ17 ÿ2 0.9
(6) (6) (6) (6)
0 ÿ11 ÿ6 18
ÿ27 ÿ35 ÿ9 35
(6) (6) (6) (6)
ÿ43 ÿ44 ÿ13 38
ÿ54 ÿ59 ÿ14 53
(6) (6) (6) (6)
ÿ58 ÿ61 ÿ13 68
ÿ66 ÿ72 ÿ13 94
(6) (6) (6) (6)
ÿ3 ÿ16 0 2.4
5 ÿ8 0 2.1
(6) (6) (6) (6)
Oven aging at 1008C, 70 h Tensile change Elongation change Hardness change
% % %
3 ÿ12 4
5 ÿ17 4
5 ÿ15 4
1 ÿ10 4
Oven aging at 1218C, 70 h Tensile change Elongation change Hardness change
% % %
3 ÿ24 6
9 ÿ21 6
6 ÿ21 6
8 ÿ8 5
Fluid aging at 1218C in ASTM oil No. 1 Tensile change Elongation change Hardness change Volume swell
% % % %
6 ÿ24 9 ÿ6.5
12 ÿ26 9 ÿ5.9
15 ÿ11 9 ÿ5.2
9 ÿ13 7 ÿ5.2
8 ÿ18 8 ÿ4.6
Fluid aging at 1218C in ASTM oil No. 3 Tensile change Elongation change Hardness change Volume swell
% % % %
1 ÿ20 3 1.8
11 ÿ11 0 5.6
8 ÿ4 0 7.8
8 1 0 8.2
ÿ1 ÿ16 1 6.6
Fluid aging at 238C in ASTM Fuel B Tensile change Elongation change Hardness change Volume swell
% % % %
Tensile change Elongation change Hardness change Volume swell
% % % %
ÿ43 ÿ42 ÿ9 18
ÿ43 ÿ40 ÿ12 26
ÿ42 ÿ40 ÿ10 28
ÿ43 ÿ41 ÿ9 28
ÿ46 ÿ45 ÿ9 28
Fluid aging at 238C in ASTM Fuel C ÿ54 ÿ58 ÿ11 37
ÿ51 ÿ52 ÿ15 45
ÿ57 ÿ58 ÿ12 50
ÿ55 ÿ54 ÿ10 48
ÿ58 ÿ59 ÿ10 46
Fluid aging at 1008C in distilled water Tensile change Elongation change Hardness change Volume swell
% % % %
ÿ5 ÿ18 0 3.6
ÿ8 ÿ26 ÿ1 3.6
ÿ2 ÿ18 0 4.4
8 ÿ1 0 3.2
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
ÿ8 ÿ23 0 3.9
3
Acrylonitrile-butadiene elastomers PROPERTY
Compression set
UNITS
VALUES
ACN % Polymer Mooney
40 60
%
1008C, 70 h (ASTM D395, method B) 10.1
33 30
12.5
33 50
10.8
33 70
REFERENCE
8.4
33 85
13.2
27 50
20 40
10.1
11.2
(6)
24.0
25.3
(6)
61
64
(6)
1218C, 70 h (ASTM D395, method B) 24.0 Rebound
%
26.0
23.0
20.1
23.9
GoodyearÿHealey method, 238C 42
57
58
59
57
GoodyearÿHealey method, 1008C
Brittle temperature
K
Gehman temperature T(2) T(5) T(10) T(100) Low temperature retraction, TRÿ10
60
74
76
77
76
78
79
(6)
245.5
236.5
234.7
234.1
234.1
222.1
218.5
(6)
258 253 251 245
257 251 249 242
256 251 249 244
257 252 250 244
252 248 245 240
246 241 239 232
(6) (6) (6) (6)
244
244
246
241
231
(6)
Torsion K K K K
269 262 259 255
K
50% elongation 252
246
* NBR compound formulationÐPolymer: 100 phr, N774: 60 phr, ZnO: 4 phr, Wingstay 100: 2 phr, Paraplex Gÿ25: 5 phr, TP 95 Plasticizer: 7 phr, METHYL TUADS: 2 phr, AMAX: 2 phr, Stearic Acid: 0.5 phr, Sulfur: 0.4 phr.
REFERENCES
1. Mark, J. E., ed. Physical Properties of Polymers Handbook. American Institute of Physics Press, Woodbury, N.Y., 1996. 2. Bayer Nitrile Handbook. 3. Ohm, R. F. In The Vanderbilt Rubber Handbook, 3d ed. R. T. Vanderbilt Co., Norwalk, Conn., 1990. 4. Small, P. A. J. Appl. Chem. 3 (1953): 71. 5. Poddubnyi, I. Ya., V.A. Grechanovskii, and A.V. Podalinskii. J. Polym. Sci., Part C, 16 (1968): 3,109. 6. Purdon, J. R. In The Vanderbilt Rubber Handbook, 3d ed. R. T. Vanderbilt Co., Norwalk, Conn., 1990.
4
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Alkyd resins MEE Y. SHELLEY TRADE NAMES CLASS
Plaskon, Durez, Glaskyd
Thermoset polymers (polyesters modi®ed with monobasic fatty acids)
Fatty acids and oils (e.g., lauric, palmitic, stearic, oleic, linoleic, linolenic, eleostearic, and licanic acids). Polyhydric alcohols (e.g., glycerol, pentaerythritol, ethylene glycol). Polybasic acids (e.g., phthalic acid/anhydride, maleic acid/anhydride, fumaric acid/anhydride).
PRINCIPAL COMPONENTS
Paints, brushing enamels, and clear varnish. Industrial coatings (spraying, dipping, ¯ow coating, roller coating). Industrial baking ®nishes.
MAJOR APPLICATIONS
Rapid drying. Good adhesion. Flexibility. Mar resistance and durability. Ester groups can be hydrolyzed under alkaline conditions.
PROPERTIES OF SPECIAL INTEREST
PROPERTY
UNITS
CONDITIONS
Processing temperature
K
Molding, mineral ®lled (granular and putty) Compression Injection Transfer Molding, glass ®ber-reinforced Compression Injection Unspeci®ed
Molding pressure
MPa
Compression ratio
VALUE
405±450 410±470 430±460 420±450 410±470 425±440
REFERENCE
(1)
(1) (2)
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced
14±140 14±170
(1)
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced
1.8±2.5 1±11
(1)
Linear mold shrinkage
ratio
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Unspeci®ed
0.003±0.010 0.001±0.010 0.002±0.007
(1) (1) (2)
Density
g cmÿ3
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Unspeci®ed Coating
1.6±2.3 2.0±2.3 2.05±2.16 1.2
(1) (1, 3) (2) (3)
Water absorption
%
Molding, mineral ®lled (granular and putty), 1/8 in. thick specimen, 24 h Molding, glass ®ber-reinforced, 1/8 in. thick specimen, 24 h Coating
0.05±0.5
(1)
0.03±0.5
(1)
2
(3)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
5
Alkyd resins PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Tensile strength at break
MPa
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Molding, glass ®ber-®lled Unspeci®ed Coating
20±60 30±66 41 40±60 35
(1) (1) (3) (2) (3)
Elongation
%
Coating Molding, glass ®ber-®lled
65 2
(3)
Solubility parameters
4; 5 Hansen parameters (MPa)1=2
Conditions
Long oil (66% oil length, Plexal P65, Polyplex) Short oil (coconut oil 34% phthalic anhydride; Plexal C34)
d
p
h
t
20.42
3.44
4.56
21.20
18.50
9.21
4.91
21.24
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Tensile yield strength
MPa
Unspeci®ed
45±48
(2)
Compressive strength (rupture or yield)
MPa
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Unspeci®ed
83±260 100±250 150±190
(1) (1) (2)
Flexural strength (rupture or yield)
MPa
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Unspeci®ed Molding, glass ®ber-®lled
40±120 60±180 60±160 103
(1) (1) (2) (3)
Tensile modulus
MPa
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced
3,000±20,000 14,000±19,000
(1)
Compressive modulus
MPa
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-®lled
14,000±20,000 140
(1) (3)
Flexural modulus
MPa
Molding, mineral ®lled (granular and putty), 296 K Molding, glass ®ber-reinforced, 296 K Unspeci®ed
14,000
(1)
14,000 14,000±20,000
(1) (2)
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Unspeci®ed
16±27 27±850 17±400
(1) (1) (2)
Impact strength, Izod
6
J mÿ1
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Alkyd resins PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Hardness
Rockwell
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Molding, glass ®ber-®lled Coating
E98
(1)
E95 E80 D80
(1) (3) (3)
450±530
(1)
Rockwell Rockwell Shore De¯ection temperature
K
Molding, mineral ®lled (granular and putty) under ¯exural load, 1.82 MPa Molding, glass ®ber-reinforced under ¯exural load, 1.82 MPa Molding, glass ®ber-®lled, 1.82 MPa
480±530
(1)
470
(3)
Maximum resistance to continuous heat
K
Coating Molding, glass ®ber-®lled
360 470
(3)
Thermal conductivity
W mÿ1 Kÿ1
Granular and putty, mineral ®lled Glass ®ber-reinforced
0.5±1.0 0.6±1.0
(1)
Dielectric strength
V milÿ1
Molding, mineral ®lled (granular and putty) Molding, glass ®ber-reinforced Glass-®lled Mineral-®lled
350±450
(1)
259±530 375 400
(1) (6) (6)
Volume resistivity
ohm cm
Glass-®lled Mineral-®lled
1015 1014
(6)
Dielectric constant
Ð
Glass-®lled, 1 MHz Mineral-®lled, 1 MHz Unspeci®ed, 1 MHz Coating
4.6 4.7 4.7±6.7 4
(6) (6) (2) (3)
Dissipation factor at 1 MHz
Ð
Glass-®lled Mineral-®lled Unspeci®ed
0.02 0.02 0.009±0.02
(6) (6) (2)
REFERENCES
1. Kaplan, W. A., et al., eds. Modern Plastics Encyclopedia '97. McGraw-Hill, New York, Modern Plastics, Mid-November 1996. 2. Plastics Digest, Thermoplastics and Thermosets, 15th ed., vol. 1. D.A.T.A. Business Publishing, Englewood, 1994. 3. Seymour, R. B. Polymers for Engineering Applications. ASM International, Washington, D.C., 1987. 4. Hansen, C. M., Skand. Tidskr, FaÈrg Lack, 17 (1971): 69. 5. Du, Y., Y. Xue, and H. L. Frisch. In Physical Properties of Polymers Handbook, edited by J. E. Mark. Wiley-Interscience, New York, 1996, pp. 227±239. 6. Harper, C. A., ed. Handbook of Plastics, Elastomer, and Composites, 3d ed. McGraw-Hill, New York, 1996. Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
7
Amino resins MILIND SOHONI ALTERNATIVE NAMES TRADE NAMES CLASS
Melamines, urea resins
Resimene (Solutia, Inc.), Cymel (Cytek Industries, Inc.)
Thermoset polymers; chemical copolymers
Melamines, urea, formaldehyde, ethylene urea, benzoguanamine, thiourea, acetoguanamine
TYPICAL COMONOMERS POLYMERIZATIONS
Condensation
Molding resins, adhesives, coatings, treatment of paper and textiles, automobile tires
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
properties, lightfastness
Hardness, non¯ammability, arc resisitance, thermal
Properties of amino-formaldheyde molding compounds
1 Property
Units
Pigmentation and coloring possibilities Appearance Molding qualities Type of resin Molding temperature Molding pressure Mold shrinkage Speci®c gravity Tensile strength Flexural strength Notched Izod impact strength Rockwell hardness Thermal expansion De¯ection temperature under load Dielectric strength, short time, 0.125 in thickness Dielectric constant Dissipation factor Arc resistance Cold-water absorption, room temp. 24 h, 0.125 in thickness 7 days Boiling water test, 10 min, 1008C Burning rate Effect of sunlight
8
Resin and ®ller Urea-formaldehyde, alpha-cellulose
Melamine-formaldehyde, alpha-cellulose
Ð Ð Ð Ð 8F (8C) psi in inÿ1 Ð psi psi ft-lb inÿ1 Ð 8Cÿ1 8F V milÿ1
Unlimited Translucent to opaque Excellent Thermosetting 275±300 (135±177) 2,000±8,000 0.006±0.014 1.47±1.52 6±13 103 10±16 103 0.25±0.4 M 110±M 120 2.2±3:6 10ÿ6 260±290 300±400
Unlimited Translucent to opaque Excellent Thermosetting 280±370 (138±188) 1,500±8,000 0.005±0.015 1.47±1.52 7±13 103 10±16 103 0.24±0.35 M 110±M 125 4:0 10ÿ6 410 300±400
Ð Ð s
6±8 0.025±0.035 80±150
7.2±8.4 0.027±0.045 110±180
% mg (100 cm2 )ÿ1 % Ð Ð
0.4±0.8 800 3.4 Self-extinguishing Pastels turn gray
0.1±0.6 270 0.4 Self-extinguishing Slight color change
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amino resins Curing range of urea- and melamine-formaldehyde molding compounds Cure time (min)
Urea-formaldehyde base Upper limit Optimum temperature Lower limit Melamine-formaldehyde Upper limit Optimum temperature Lower limit
1
Cure temperature (8C) 0.5
1
1.5
2
3
4
6
8
Ð Ð Ð
170 169 167
167 164 160
163 160 156
158 155 150
154 151 145
148 145 139
145 140 135
187 175 172
182 167 155
179 159 145
177 154 138
172 146 125
169 140 120
165 130 115
161 120 110
Value extrapolated.
Rate constants for urea-formaldehyde reactions at 358C and pH 4.0
3 Reaction
Rate constant K, L (s mol)ÿ1
U F ! UF UF U ! UÿCH2 ÿU UF UF ! UÿCH2 ÿUF UF2 UF ! FUÿCH2 ÿUF UF2 UF2 ! FUÿCH2 ÿUF2
4:4 10ÿ4 3:3 10ÿ4 0:85 10ÿ4 0:5 10ÿ4 <3 10ÿ6
1
U urea. F formaldehyde:
H NMR chemical shiftsy for melamine resins
2 Proton
Chemical shift
Structure
ÿNH2
ÿNH ÿNÿCH2 OH
5.8±6.2 7.2±7.4 5.4±5.6
Broad singlet Broad singlet Broad triplet
ÿNÿCH2 OH ÿNÿCH2 OR ÿNÿCH2 ÿNÿ
Ð 4.6±5.1 Ð
Ð Broad peak Ð
ÿOÿCH3 ÿOÿCH2 CH3 ÿOÿCH2 CH3 ÿOÿCH2 CH2 CH3 ÿOÿCH2 CH2 CH3 ÿOÿCH2 CH2 CH3 ÿOÿCH
CH3 2 ÿOÿCH
CH3 2 ÿOÿCH2 CH2 CH2 CH3 ÿOÿCH2 CH2 CH2 CH3 ÿOÿCH2 CH2 CH2 CH3 ÿOÿCH2 CH
CH3 2 ÿOÿCH2 CH
CH3 2 ÿOÿCH2 CH
CH3 2
3.2 3.0±3.2 1.2 3.5 1.5 1.1 3.8±4.0 1.0±1.1 3.0±3.3 1.0±1.5 0.7±1.0 3.5 1.5 0.8
Singlet Quadruplet Triplet Triplet Multiplet Triplet Multiplet Doublet Triplet Multiplet Triplet Multiplet Multiplet Doublet
y
Chemical shifts in ppm relative to TMS.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
9
Amino resins 13
C NMR chemical shiftsy for melamine resins
5 Carbon atom
N N N N N
Chemical shift
C ÿNH2
167.4
C ÿNH
CH2 Oÿ
166.0±166.6
C ÿN
CH2 Oÿ2 N ÿNHCH2 OC H2 Oÿ ÿN
C H2 OCH3 2 ÿNHC H2 OCH3 ÿN
C H2 OC4 H9 2 ÿNHC H2 OC4 H9 ÿNHC H2 OC H2 NHÿ ÿNHC H2 OH ÿN
CH2 OC H3 2 ÿNHCH2 OC H3 ÿNCH2 OC H2 CH2 CH2 CH3 ÿNCH2 OCH2 CH2 CH2 CH3 ÿNCH2 OCH2 CH2 C H2 CH3 ÿNCH2 OCH2 CH2 CH2 C H3 ÿNCH2 OCH2 C H
CH3 2 ÿNCH2 OCH2 CH
C H3 2 y
165.4±165.8 93.0 76.8 72.6 74.4 71.0 68.0±69.0 64.5 55.4 54.5 66.9 31.4 18.9 13.7 28.1 18.9
Chemical shifts in ppm relative to TMS.
Melamine/formaldehyde reactions
2 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
10
ÿNCH2 OCH3 ROH ! ÿNCH2 OR CH3 OH 2 ÿNCH2 OCH3 H2 O ! ÿNCH2 Nÿ H2 C O 2CH3 OH ÿNCH2 OCH3 ÿNH ! ÿNCH2 Nÿ CH3 OH 2 ÿNCH2 OCH3 ! ÿNCH2 Nÿ CH3 OCH2 OCH3 ÿNCH2 OCH3 ÿNCH2 OH ! ÿNCH2 OCH2 Nÿ CH3 OH ÿNCH2 OCH3 H2 O ! ÿNCH2 OH CH3 OH ÿNCH2 OH ! ÿNH H2 C O ÿNCH2 OH ÿNH ! ÿNCH2 Nÿ H2 O 2 ÿNCH2 OH ! ÿNCH2 Nÿ H2 C O H2 O ÿNCH2 OH ROH ! ÿNCH2 OR H2 O 2 ÿNCH2 OH ! ÿNCH2 OCH2 Nÿ H2 O
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amino resins Reaction constants for urea-formaldehyde at 358C and pH 7.0 Reaction R1
1. U F ) ÿÿ ÿ* ÿ UF R2 R1
2. UF F ) ÿÿ ÿ* ÿ UF2 R2
R1
3. UF2 F ) ÿÿ ÿ* ÿ UF3 R2
4
Second order reaction velocity constant, k1 (l molÿ1 sÿ1 )
Equilibrium constant, K
k2 k1ÿ1 (mol lÿ1 )
0:9 10ÿ4
0.036
0:38 10ÿ4
0.22
0:1 10ÿ4
1.2
Properties of melamine-formaldehyde laminates
1 Property
Units
Coloring possibilities Appearance Laminating temperature Laminating pressure Speci®c gravity Tensile strength Flexural strength Notched Izod impact strength Rockwell hardness Water absorption, 24 h, room temp., 0.125 in thickness Effect of sunlight Machining qualities Thermal expansion Resistance to heat (continuous) Burning rate Dielectric strength, short time Dielectric constant, at 106 cps Dissipation factor, at 106 cps Arc resistance
Melamine-formaldehyde laminate Cellulose paper base
Glass fabric base
psi psi ft-lb inÿ1 Ð %
Unlimited Translucent/opaque 270±320 500±1,800 1.4±1.5 10±25 103 14±20 103 0.3±1.5 M 110±M 125 1.0±2.0
Unlimited Translucent/opaque 270±300 1,000±1,800 1.82±1.98 25±40 103 40±65 103 5±15 M 115±M 125 1.0±2.5
Ð Ð 8Cÿ1 8F Ð V milÿ1 Ð Ð s
Slight color change Fair 0.7±2:5 10ÿ5 210±260 Nil 400±700 6.4±8.5 0.035±0.05 100
Slight color change Fair 0.7±1:2 10ÿ5 300 Nil 200±500 6.0±9.0 0.011±0.025 175±200
Ð Ð 8F psi
Cotton fabric ®ller.
Rate constants for melamine-formaldehyde resins at pH 7.7
6 Reaction
Temp. (8C)
Second order rate constant of forward reaction, k1
First order rate constant of reverse reaction, k2
1. M F MF
50 70 50 70 50 70
1:4 10ÿ3 6:1 10ÿ3 1:0 10ÿ3 5:4 10ÿ3 1:8 10ÿ3 7:4 10ÿ3
0:3 10ÿ4 3:5 10ÿ4 1:4 10ÿ4 6:6 10ÿ4 Ð Ð
2. MF F MF2 3. MF2 F MF3
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
11
Property
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Physical Speci®c gravity Water absorption, 24 h, 3.2 mm thick Mechanical Tensile strength Elongation Tensile modulus Hardness, Rockwell M Flexural strength Flexural modulus Notch Impact strength Thermal Thermal conductivity Coef®cient of thermal expansion De¯ection temperature at 1.8 MPa (264 psi) Flammability class Continuous no-load service temperature Electrical Dielectric strength Short time, 3.2 mm thick Step by step Dielectric constant, 22.88C 60 Hz 103 Hz Dissipation factor, 22.88C 60 Hz 103 Hz Volume resistivity, 22.88C, 50% rh Arc resistance
Units
Urea
Melamine
Alpha-cellulose
Alpha-cellulose
Macerated fabric
Asbestos
Glass ®ber
Ð %
1.47±1.52 0.48
1.47±1.52 0.1±0.6
1.5 0.3±0.6
1.7±2.0 0.08±0.14
1.8±2.0 0.09±0.21
MPa (103 psi) % GPa (105 psi) Ð MPa (103 psi) GPa (105 psi) J mÿ1 (ft-lb inÿ1 )
38±48 (5.5±7) 0.5±1.0 9±9.7 (13±14) 110±120 70±124 (11±18) 9.7±10.3 (14±15) 14±18 (0.27±0.34)
48±90 (7±13) 0.6±0.9 9.3 (13.5) 120 83±104 (12±15) 7.6 (11) 13±19 (0.24±0.35)
55±69 (8±10) 0.6±0.8 9.7±11 (14±16) 120 83±104 (12±15) 9.7 (14) 32±53 (0.6±1.0)
38±45 (5.5±6.5) 0.3±0.45 13.5 (19.5) 110 52±69 (7.4±10) 12.4 (18) 16-21 (0.3±0.4)
35±70 (5±10)
42.3 2.2±3.6
29.3±42.3 2.0±5.7
44.3 2.5±2.8
54.4±71 2.0±4.5
48.1 1.5±1.7
8C
130
182
154
129
204
Ð 8C
VOy 77z
VOy 99z
Ð 121
Ð 149
VO 149±204
330±370 220±250
270±300 240±270
250±350 200±300
410±430 280±320
170±300 170±240
7.7±7.9 Ð
8.4±9.4 7.8±9.2
7.6±12.6 7.1±7.8
6.4±10.2 9.0
9.7±11.1 Ð
ohm cm
0.034±0.043 Ð 0.5±5:0 1011
0.030±0.083 0.015±0.036 0.8±2:0 1012
0.07±0.34 0.03±0.05 1.0±3:0 1011
0.07±0.17 0.07 1:2 1012
0.14±0.23 Ð 0.9±2:0 1011
s
80±100
125±136
122±128
20±180
180±186
10ÿ4 J-cm sÿ1 cmÿ2 8C ÿ1 10ÿ5 cm cmÿ1 8C
V/0.00254 cm Ð Ð
To convert J to cal divide by 4.184. Applies to specimens thicker than 1.6 mm. z Based on no color change. y
ÿ1
16.5 (24) 115 90±165 (13±24) 16.5 (24) 32-1000 (0.6±18)
Amino resins
12
Typical properties of ®lled amino resin molding compounds
3
Amino resins REFERENCES
1. Widmer, G. In Encyclopedia of Polymer Science and Technology, Vol. 2. John Wiley and Sons, New York, 1965, p. 54. 2. Bauer, D. R. Progress in Organic Coatings 14 (1986): 193. 3. Updegraff, I. H., S. T. Moore, W. F. Herbes, and P. B. Roth. In Kirk-Othmer Encyclopedia of Chemical Technology, 3rd ed., Vol. 2, edited by J. I. Kroschwitz. John Wiley and Sons, New York, 1978, p. 440. 4. Vale, C. P., and W. G. K. Taylor. Aminoplastics. Iliffe Books, London, 1964, p. 24. 5. Christensen, G. Prog. Org. Coat. 8 (1980): 211. 6. Vale, C. P., and W. G. K. Taylor. Aminoplastics. Iliffe Books, London, 1964, p. 47.
The author wishes to acknowledge McWhorter Technologies for its generous support in compiling these data.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
13
Amylopectin W. BROOKE ZHAO CLASS
Carbohydrate polymers
STRUCTURE
CH2
O H
CH2OH O
H
H
H
OH
H O
O H MAJOR APPLICATIONS
H
H
H OH
O
OH
H
OH
n
Thickeners, stabilizers, and adhesives.
The highly branched nature of amylopectin accounts for the extreme brittleness of its ®lms and extrudates. The extensive branching reduces chain entanglements usually required in high polymers to achieve satisfactory ®lm properties.
PROPERTIES OF SPECIAL INTERESTS
Fractionation of starches. Native starches usually contain about 70±80% amylopectin. Genetic modi®cation can result in starches having virtually no amylose content, such as waxy maize.
PREPARATIVE TECHNIQUES
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight (of repeat unit)
g molÿ1
Ranges Method: DMSO, light scattering Barley Pea Smooth Wrinkled Potato I Potato II Tapioca Waxy maize Waxy maize, sheared Wheat
4:5 104 ±4:2 108
(1) (2)
Range, depending on source In DMSO, GPC (Mw 15:96 106 ; Mn 8:5 106 )
300±500 1.88
Polydispersity index (Mw =Mn )
14
Ð
4:0 107 5:0 107 5:0 107 4:4 107 6:5 106 4:5 107 4:0 107 1:0 106 4:0 107
(1) (3)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amylopectin PROPERTY
UNITS
CONDITIONS
VALUE
Degree of polymerization
Ð
Depending on plant source and methods of extraction
NMR
ppm
13
Surface tension
mN mÿ1
Ð
Speci®c rotation []
Degrees
Solvent
(nm)
Water
135
1 M NaOH 1 N KOH Ethylenediamine Ethylenediamine hydrate Formamide
134 Ð Ð Ð Ð
C chemical shift Solid state CP/MAS 25.18 MHz
REFERENCE 6
280±(1:45 10 )
101.9±100.3 (C-1) 63.1 (C-6)
(5)
200 192 163 160 173 182 167 192
(6) (7) (6) (7) (7) (7) (7) (7)
0.156 0.142 0:098 0:001 0:092 0:003 0:069 0:002 0:151; 0:155
(8) (7) (7) (7) (7) (9)
ml gÿ1
Common solvents
Dimethyl sulfoxide, ethylene-diamine (hydrate and anhydrate), chloral hydrate, and hydrazine hydrate
Dilute-limit self diffusion coef®cient
m2 sÿ1
Diffusion coef®cient
Ð
D0 In DMSO In d-DMSO In H2 O Mass-weighted average molar mass
D0
Mw In d-DMSO In D2 O Mass-z average molar mass
D0
Mz In DMSO, 248C Ð
J a=b (ratio of semi-axes of the particles)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(4)
35
Refractive index increment dn=dc
0.5 N KCl 1 N KOH Ethylenediamine Ethylenediamine hydrate Formamide Water
(1)
(2)
8 10ÿ13
3:2 0:7 10ÿ11
1:0 0:2 10ÿ11
(10) (11) (11)
9 2 10ÿ12
2:8 0:6 10ÿ12
(11) (11)
13 3 10ÿ13
9 2 10ÿ13
(11) (12)
9 10ÿ12
(10)
38 28
(10) (3)
15
Amylopectin PROPERTY
UNITS
CONDITIONS
Sedimentation coef®cient (s0 )
Svedberg
Plant source Rongotes
VALUE
REFERENCE
(13)
88 3 115 4 103 1 65 7 67 1 73 1 105 2 87 8 98 4
Crossbow Aotea Karamu Hilgendorf Hydrodynamic volume
a2 =b1=3
Ð
In DMSO
18(7)
(10)
Hydrodynamic radius (RD )
nm
In DMSO In d-DMSO In D2 O
22(3) 14 82
(10) (11) (11)
Solvation coef®cient
h
g gÿ1
Amylopectin/H2 O Amylopectin/DMSO
0:25 0:04 0:6 0:2
(11)
Radius of gyration
Ê A
Solvent for light scattering Mw 1 N KOH Ethylenediamine Ethylenediamine hydrate Formamide Water
Second virial coef®cient A2
mol cm3 gÿ2
(7) 7
8:0 10 1:0 108 7:5 107 9:5 108 1:66 108 4:3 107
2050 2060, 2120 2150, 2120 2050, 2090 2960, 2920 1540, 1630
Solvent for light scattering Mw 1 N KOH Ethylenediamine Ethylenediamine hydrate Formamide Water
(7) 7
8:0 10 1:0 108 7:5 107 9:5 108 1:66 108 4:3 107
7
9:6 10 7:6 107 2:4 107 2:9 107 8:0 107 0
REFERENCES
1. Powell, E. L. In Industrial Gums: Polysaccharides and Their Derivatives, 2d ed., edited by R. L. Whistler and J. N. Bemiller. Academic Press, New York, 1973. 2. Young, Austin H. In Starch: Chemistry and Technology, 2d ed., edited by R. L. Whistler, J. N. Bemiller, and E. F. Paschall. Academic Press, Orlando, Fla., 1984 (and references therein). 3. Salemis, P., and M. Rinaudo. Polym. Bull. 11 (1984): 397. 4. Hewitt, J. M., M. Linder, S. Perez, and A. Buleen. Carbohydr. Res. 154 (1986): 1. 5. Ray, B. R., J. R. Anderson, and J. J. Scholtz. J. Phys. Chem. 62 (1958): 1,220. 6. Neely, W. B. J. Org. Chem. 26 (1961): 3,015. 16
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amylopectin 7. 8. 9. 10. 11. 12.
Stacy, C. J., and J. F. Foster. J. Polym. Sci. 20 (1956): 57. Brice, B. A., and M. Halwer. J. Opt. Soc. Amer. 41 (1951): 1,033. Debye, P. J. Phys. Coll. Chem. 51 (1947): 18. Callaghan, P. T., J. Lelievre, and J. A. Lewis. Carbohydr. Res. 162 (1987): 83. Collaghan, P. T., and J. Lelievre. Biopolymers 24 (1985): 441. Dickenson, E., J. Lelievre, G. Stainsby, and S. Waight. In Progress in Food and Nutrition Science: Gums and Stabilizers for the Food Industry. Part II. Applications of Hydrocolloids. Pergamon Press, Oxford, 1984. 13. Lelievre, J., J. A. Lewis, and K. Marsden. Carbohydr. Res. 153 (1986): 195.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
17
Amylose W. BROOKE ZHAO CLASS
Carbohydrate polymers
STRUCTURE
CH2OH
CH2OH H
O
H
H
H OH
O H
H
OH
H
O H
H
OH
O H
OH
n
Adhesives, food, pharmaceutical, gels and foams, coating, and biodegradable packaging ®lms.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTERESTS
for its ®lm-forming ability.
The linear glucan chains in amylose are responsible
Fractionation of starches. Native starches contain about 20± 30% amylose. Genetic modi®cation can result in high amylose content (up to 80%).
PREPARATIVE TECHNIQUES
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight
g molÿ1
Range Source
3:2 104 ±3:6 106
(1) (2)
Apple Banana Broad bean Barley Iris (rhizome) Mango seed Oat Parsnip Pea Smooth Wrinkled Potato Potato Rubber seed Rye Sweet corn Wheat Wheat I Wheat II 18
Methods Anaerobic, viscosity Anaerobic, viscosity Anaerobic, viscosity Anaerobic, viscosity DMSO, light scattering Anaerobic, viscosity Anaerobic, viscosity Anaerobic, viscosity DMSO, light scattering Anaerobic, viscosity
2:4 105 2:7 105 2:9 105 3:0 105 2:11 106 2:9 105 2:9 105 2:1 105 2:19 106 7:1 105
Anaerobic, viscosity Anaerobic, viscosity Anaerobic, light scattering DMSO, light scattering Anaerobic, light scattering DMSO, light scattering Anaerobic, light scattering Anaerobic, light scattering DMSO, light scattering DMSO, light scattering
2:1 105 1:6 105 4:9 105 1:9 106 2:4 105 2:5 106 1:8 105 3:4 105 1:33 106 2:65 106
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amylose PROPERTY
UNITS
CONDITIONS 5
VALUE
REFERENCE
Polydispersity index (Mw =Mn )
Ð
In DMSO, GPC, Mw 2:83 10 , Mn 1:53 105
1.85
(3)
Degree of polymerization (DP)
Ð
Depending on plant source and extracting methods
200±22,000
(1)
Polymorphs
Ð
Alkali amylose after kept at 80% or higher relative humidity at 85±908C Alkali amylose after kept at 80% or higher relative humidity at room temperature Vh form after extensive drying Crystallized from n-butanol
A-amylose
(2)
Polymorphs
Lattice
Cell dimension (AÊ)
Cell angle
a
b
c
A
Orthorhombic 11.90
17.70
10.52
90
B
Orthorhombic 18.50
18.50
10.40
90
Va Vh
Orthorhombic 12.97 Orthorhombic 13.7
22.46 23.7
7.91 8.05
90 90
PROPERTY
UNITS ÿ1
B-amylose Va -amylose Vh -amylose
Helix symmetry
Interchain and intersheet spacings (AÊ) d"#
2 6=1 in 21.04 A repeat 2 6=1 in 20.8 A repeat 21 (6/5) 6/5
9.87
3.51 (4)
10.68
9.25
3.47 (4)
12.97 13.69
11.23 11.86
1.32 (4) 1.34 (4)
VALUE
3,500±3,300 (broad) 3,500±3,300 (broad), 1,122 3,500±3,300 (sharper) 1,263 ! 1,254 946 ! 936
cm
OH stretching V-amylose (crystalline) B-amylose (crystalline) Amorphous CH2 OH bending, V ! B CH2 skeletal, V ! B
NMR
ppm
1
H chemical shift DMSO-d6 (1008C) D2 O, 500 MHz (758C)
13
C chemical shift Solid state CP/MAS A-amylose B-amylose Vh -amylose Va -amylose
h
10.66
CONDITIONS
Infrared absorption
d110
Ref.
REFERENCE
(5)
5.07 (H-1), 3.30 (H-2), 3.64 (H-3), (6) 3.32 (H-4), 3.4 (H-5) 3.7 (H-6) 5.896 (d) (H-1), 4.162 (dd) (H-2), (7) 4.478 (dd) (H-3), 4.162 (t) (H-4), 4.350 (H-5), 4.406 (dd) (H-6a ), 4.328 (dd) (H-6b ) 100.4 (C-1), 72.6 (C-2), 73.7 (C-3), (6) 79.4 (C-4), 72.1 (C-5), 61.2 (C-6) (8) 102.30, 101.32, 100.05 (t) (C-1), 63.67, 62.73 (shoulder) (C-6) 101.71, 100.74 (d) (C-1) 62.69 (C-6) 103.85 (C-1), 62.21 (C-6) 103.76 (C-1), 61.79 (C-6)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
19
Amylose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Spin-spin coupling constant 3 JHH
Hz
D2 O, 500 MHz (758C)
4.0 (H-1), 9.9 (H-2), 9.1 (H-3), (7) 9.3 (H-4), 2.0 4.7 (H-5), 12 (H-6)
Dissociation constant pKa
Ð
pH 11:2 0:1 pH 12:5 1
12:5 0:2 13:0 0:1
(9)
Degree of dissociation Ð
pH 11:2 0:1 pH 12:5 1
0.05 0.26
(9)
pH 11:2 0:1 pH 12:5 1
3.5 18.4
(9)
Electrophoretic mobility U
cm2 Vÿ1 sÿ1
Common solvents
Alkaline solutions, aqueous chloral hydrate, formamide, dichloroacetic acid, pyrrolidine, dimethyl sulfoxide, acetamide, ethylenediamine, piperazine, formic acid, and urea
(2)
Theta temperature
K
(10) (11)
Mark-Houwink Ð parameters: K and a
0.33 M KCl DMSO/acetone 43.5%
Water 0.5 N NaOH 0.15 N NaOH 0.2 N KOH 0.5 N KOH 1.0 N KOH 0.33 N KCl 0.5 N KCl Aqueous KCl (acetate buffer) Dimethyl sulfoxide
Ethylenediamine Formamide
Flexibility parameter
20
Ð
293±296 298 K 105 (ml gÿ1 )
a
13.2 1.44 3.64 8.36 6.92 8.5 1.18 113 112 115 55 55 59 1.25 30.6 15.1 3.95 15.5 22.6 30.5
0.68 0.93 0.85 0.77 0.78 0.76 0.89 0.50 0.50 0.50 0.53 0.53 0.53 0.87 0.64 0.70 0.82 0.70 0.67 0.62
KCl KOH, 258C Hydrodynamic data in 2:70 condition Stockmayer-Fixman plot 2:58 Extrapolation of tending to zero ;1=2 1:34 ;1=3 2:18 ;1=4 2:69
(2)
(12)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amylose PROPERTY
UNITS
CONDITIONS
VALUE
Unperturbed chain dimension hSi2 =P
Ê A
Solvent Me2 SO-H2 O Five solvents Me2 SO-KCl Me2 SO-acetone Me2 SO-acetone Me2 SO-MeOH H2 O-KCl 0.5 N NaOH H2 O Formamide Me2 SO
12.2 12.2 12.2 12.8 13.2 14.6 14.6 14.9 14.7 14.7 14.7
Second virial coef®cient A2
mol cm3 gÿ2
DP 3,650, 208C DMSO/44% acetone DMSO/42% acetone DMSO/39% acetone Formamide DMSO/30% acetone DMSO/20% acetone DMSO/10% acetone DMSO Ethylenediamine 0.5 N NaOH Water 1 N KOH 0.5 KCl, 318C 0.5 KCl, 288C
ÿ2:3 10ÿ6 3:45 10ÿ5 1:322 10ÿ4 2:19 10ÿ4 2:59 10ÿ4 3:92 10ÿ4 4:78 10ÿ4 5:35 10ÿ4 5:64 10ÿ4 4:88 10ÿ4 1:10 10ÿ4 8:9 10ÿ5 2:89 10ÿ5 1:41 10ÿ5
Expansion coef®cient
Ð
DP 3,650, 208C DMSO/44% acetone MSO/42% acetone DMSO/39% acetone Formamide DMSO/30% acetone DMSO/20% acetone DMSO/10% acetone DMSO Ethylenediamine 0.5 N NaOH Water
0.96 1.1 1.25 1.47 1.53 1.73 1.88 2.0 2.08 1.86 1.59
Radius of gyration
Ê A
Solvent for L.S.
2
DMSO 1 N KOH 0.5 N KCl, 318C 0.5 N KCl, 288C DMSO DMSO DMSO DMSO DMSO DMSO
Mw
REFERENCE
(13)
(14) (14) (14) (14) (14) (14) (14) (14) (14) (14) (14) (11) (11) (11) (14)
(11) 6
2:22 10 2:23 106 2:44 106 Ð 1:35 106 1:05 106 8:47 105 5:52 105 2:70 105 1:46 105
935 912 763 745 724 656 610 543 425 334
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
21
Amylose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE 21
Universal constant
Ð
Ð
2:1 10 3:6 1021
Length of Kuhn statistical segment
Ê A
Aqueous, viscosity Aqueous, sedimentation DMSO Helical region, ef®cient bond length Ê b0 1:33 A 0.33 M KCl, viscosity 0.33 M KCl, sedimentation 0.2 M KOH, viscosity 0.2 M KOH, sedimentation Nonhelical region, ef®cient bond length Ê b0 4:41 A 0.33 M KCl, viscosity 0.33 M KCl, sedimentation 0.2 M KOH, viscosity 0.2 M KOH, sedimentation
21.1 17.3 95 24 26 74 70
(15) (16) (10) (10) (10) (17)
(17)
90 86 240 230
Glass transition temperature Tg
K
Extrapolation data from substituted amylose
317
(18)
Melting temperature Tm
K
Extrapolation data from substituted amylose
527
(18)
Acidic catalyst, 79±1208C, 3±8 h Acidic catalyst, 150±2708C, 6±18 h 2208C, 10±20 h
White dextrins Yellow or canary dextrins British gums
(19)
Pyrolysis
Pyrolysis weight
%
loss
Amount (mg) 80 100
Enthalpy of hydration
22
kJ molÿ1
Temp. range 240±265 265±300 300±350 240±265 265±300 300±350
50±958C, Vh (helix diameter, Ê ) $ H2 O Va (helix 13.7 A Ê) diameter, 13.0 A
(20) 10 59 11 10 58 12 43.5
(21)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amylose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Speci®c rotation []
Degree
Solvent
(nm)
Water
135 546 134 546 132 132 210 546 546 546 546 546 546 546
200 232, 236 201 200 200 162 175 225, 226 171 238, 239 191, 195 210, 212 156 174
(22) (23) (22) (11) (22) (22) (22) (23) (11) (23) (23) (23) (11) (11)
Ð
1.5198
(24)
0.5 M KCl 8 M urea 1 M NaOH DMSO Formamide Ethylenediamine Hexamethylphosphoramide 1 N KOH 0.5 N KOH Refractive index n46 Ð 2 Refractive index increment dn=dc
ml gÿ1
DMSO, 436 nm DMSO, 546 nm 1 N KOH
0:0676 3% 0:0659 3% 0.146
(11) (11) (25)
Sedimentation coef®cient
Svedberg
Ultracentrifugation Source Rongotea
10.2
(26) (27)
Crossbow Aotea Karamu Hilgendorf
5:0 0:2 5:2 0:5 4:5 0:1 2:6 0:4 3:2 0:1 3:3 0:1 4:0 0:7 5:7 0:9 2:9 0:6
Segment mobility ms
Ð
Ultracentrifugation
0 (rigid)
(26)
Segment size lm
Ê A
Ultracentrifugation
1.3
(26)
Surface tension
mN mÿ1
Ð
37
(28)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
23
Amylose PROPERTY
UNITS
CONDITIONS
VALUE
Tensile strength
MPa
50% relative humidity, 728F Source DP
Dry (10ÿ2 )
Wet (10ÿ3 )
6.08 5.79 6.47 6.27 6.86 7.06 7.15 6.66 6.96 7.25 7.45 5.19 6.47 1.86
1.3 2.1 1.5 2.2 1.8 1.9 2.0 1.0 0.2 0.6 1.0 0.5 Ð Ð
Dry
Wet
13 9 13 14 18 14 13 6 7 8 10 6 9 1
39 57 19 42 38 18 15 6 5 5 6 4 Ð Ð
Tapioca White potato Wheat Sweet potato Tapioca Tapioca Corn Corn Corn Corn Corn Corn Corn Corn Elongation at break
%
50% relative humidity, 728F Source DP Tapioca White potato Wheat Sweet potato Tapioca Tapioca Corn Corn Corn Corn Corn Corn Corn Corn
Tear strength
g
2,110 1,610 1,230 1,215 1,205 915 820 505 435 420 400 310 265 230
50% relative humidity, 728F Source DP Tapioca White potato Wheat Sweet potato Tapioca Tapioca Corn Corn Corn Corn Corn Corn Corn Corn
24
2,110 1,610 1,230 1,215 1,205 915 820 505 435 420 400 310 265 230
2,110 1,610 1,230 1,215 1,205 915 820 505 435 420 400 310 265 230
REFERENCE
(29)
(29)
(29) 8 10 10 9 8 Ð 8 6 7 4 7 5 3 Ð
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Amylose PROPERTY
Permeability constant
UNITS
CONDITIONS ÿ1 ÿ1
mol cm s mm Hgÿ1
VALUE
Water at 258C Relative humidity 1±53% 29±1% 1±100%
REFERENCE
(30) 3:1 10ÿ11 1:5 10ÿ10 2:7 10ÿ10
Organic vapor
Vapor pressure (cm Hg) at 358C
Methanol Ethanol 1-Propanol 1-Butanol Acedic acid Ethyl acetate Acetone Carbon tetrachloride Benzene Benzaldehyde
20.4 10.4 3.74 1.31 2.67 16.5 34.6 17.6 14.8 0.16
Gas at 258C Air Oxygen Nitrogen Carbon dioxide Ammonia Sulfur dioxide
(30) 2:5 10ÿ12 5:8 10ÿ14 8:6 10ÿ14 2:5 10ÿ13 5:6 10ÿ14 4:4 10ÿ14 3:4 10ÿ14 1:6 10ÿ14 6:3 10ÿ14 8:0 10ÿ13 0 0 0 2:6 10ÿ16 1:1 10ÿ12 7:8 10ÿ14
(30)
REFERENCES
1. Howe-Grant, M. In Kirk-Othmer Encyclopedia of Chemical Technology, 4th ed. Vol. 4, edited by J. I. Kroschwitz. John Wiley and Sons, New York, 1992. 2. Young, A. H. In Starch: Chemistry and Technology, 2d ed., edited by R. L. Whistler, J. N. Bemiller, and E. F. Paschall, Academic Press, Orlando, Fla., 1984 (and references therein). 3. Salemis, P., and M. Rinaudo. Polym. Bull. 11 (1984): 397. 4. Sarko, A., and P. Zugenmaier. In Fiber Diffraction Methods, (ACS Symposium Series 141), edited by A. D. French and K. K. Gardner. American Chemical Society, Washington, D.C., 1980. 5. Casu, B., and M. Reggiani. J. Polym. Sci., Part C, 7 (1964): 171. 6. Gagnaire, D., D. Mancier, and M. Vincendon. Org. Mag. Res. 11 (1978): 1,978. 7. Neszmelyi, A., and J. Hollo. Starch/Starke 5 (1990): 167. 8. Horii, F., H. Yamamoto, A. Hirai, and R. Kitamaru. Carbohydr. Res. 160 (1987): 29. 9. Doppert, H. L., and A. J. Staverman. J. Polym. Sci., Part A-1, 4 (1966): 2,367 and 2,373. 10. Banks, W., and C. T. Greenwood. Macromol. Chem. 67 (1963): 49. 11. Everett, W. W., and J. F. Foster. J. Am. Chem. Soc. 81 (1959): 3,459. 12. Gonzalez, C., F. Zamora, G. M. Guzman, and L. M. Leon. J. Macromol. Sci. Phys. B26(3) (1987): 257. 13. Burchard, W. In Solution Properties of Natural Polymers (Special Publication Number 23). The Chemical Society, London, 1967. 14. Burchard, W. Makromol. Chem. 59 (1963): 16. 15. Mandelkern, L., and P. J. Flory. J. Chem. Phys. 20 (1952): 212. 16. Flory, P. J., and T. G. Fox. J. Am. Chem. Soc. 73 (1951): 1,904. 17. Banks, W., and C. T. Greenwood. Eur. Polym. J. 5 (1969): 649. 18. Cowie, J. M. G., P. M. Toporowski, and F. Costaschuk. Makromol. Chem. 121 (1969): 51. Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
25
Amylose 19. Greenwood, C. T. In Advances in Carbohydrate Chemistry, Vol. 22. Academic Press, New York, 1967. 20. Desai, D. H., K. C. Patel, R. D. Patel, and V. Vidyanagar. Die Starke 11 (1976): 377. 21. Nicolson, P. C., G. U. Yuen, and B. Zaslow. Biopolymers 4 (1966): 677. 22. Neely, W. B. J. Org. Chem. 26 (1961): 3,015. 23. Dintzis, F. R., R. Tobin, and G. E. Babcock. Biopolymers 10 (1971): 379. 24. Van Wijk, R., and A. J. Staverman. J. Polym. Sci., Part A-2, 4 (1966): 1,012. 25. Foster, J. F., and M. D. Sterman. J. Polym. Sci. 21 (1956): 91. 26. Elmgren, H. Carbohydr. Res. 160 (1987): 227. 27. Lelievre, J., J. A. Lewis, and K. Marson. Carbohydr. Res. 153 (1986): 195. 28. Ray, B. R., J. R. Anderson, and J. J. Scholtz. J. Phys. Chem. 62 (1958): 1,220. 29. Wolff, I. A., et al. Ind. Eng. Chem. 43 (1951): 915. 30. Rankin, J. C., I. A. Wolff, H. A. Davis, and C. E. Rist. Ind. Eng. Chem. 3 (1958): 120.
26
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Bisphenol-A polysulfone TAREK M. MADKOUR ACRONYM, TRADE NAMES CLASS
PSF, Udel P1700 and P3500 (Amoco)
Poly(ether sulfones)
SYNTHESIS
Polycondensation
STRUCTURE
CH3 O
C
O
SO2 n
CH3
Medical and household appliances that are sterilizable by hot air and steam such as corrosion-resistant piping. Also used in electric and electronic applications and as membranes for reverse gas streams and gas separation.
MAJOR APPLICATIONS
High-performance thermoplastic of relatively low ¯ammability. Amorphous, high-creep resistance and stable electrical properties over wide temperature and frequency ranges. Transparent with good thermal and hydrolytic resistance. High alkaline stability.
PROPERTIES OF SPECIAL INTEREST
PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
Ð
Molecular weight (of repeat unit)
g mol
Ð
442.53
Infrared bands (frequency)
cmÿ1
Group assignments SO2 scissors deformation Aromatic ring bend Para out-of-plane aromatic CH wag Para in-plane aromatic CH bend Para in-plane aromatic CH bend SO2 symmetric stretch SO2 symmetric stretch Aryl-O-aryl C±O stretch SO2 asymmetric stretch SO2 asymmetric stretch CH3 symmetric (umbrella) deformation Para aromatic ring semicircle stretch Para aromatic ring semicircle stretch Para aromatic ring semicircle stretch Para aromatic ring quadrant stretch
560 690 834 1,014 1,105 1,151 1,175 1,244 1,294 1,325 1,365 1,410 1,490 1,505 1,585
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(1, 2)
27
Bisphenol-A polysulfone PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
Group assignments CH3 symmetric stretch CH3 asymmetric stretch Aromatic CH stretches
2,875 2,970 3,000±3,200
REFERENCE
Infrared bands (frequency)
cm
(1, 2)
Thermal expansion coef®cient
Kÿ1
1 atm and 208C
2:1 104
(3)
Isothermal compressibility
barÿ1
208C
2:2 105
(3)
Density
g cmÿ3
Ð
1.24
(4)
Solubility parameter
(MPa)1=2
Ð
20.26
(5)
Glass transition temperature
K
Forced oscillation dynamicmechanical analysis
459
(6)
Sub-Tg transition temperature
K
-relaxation temperature
-relaxation temperature
358 193
(6)
Heat de¯ection temperature
K
(1.82 MPa)
447
(7)
Mechanical properties
4; 7; 8 Property
28
Units
Resin Neat resin
30% glass ®ber reinforced
30% carbon ®ber reinforced
Tensile modulus
MPa
2,482
Ð
Ð
Tensile strength
MPa
69.0
120
190
Maximum extensibility
L=L0 r
%
3.0
2.31
1.02
Flexural modulus
MPa
2,758
6,747
13,069
Flexural strength
MPa
103
208
244
Notched Izod impact strength
J mÿ1
80.4
400
118
Unnotched Izod impact strength
J mÿ1
Ð
1,049
456
Hardness
Shore D
69
85
87
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Bisphenol-A polysulfone PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
WLF parameters: C1 and C2
Ð
Ð
C1 15:1 C2 49:0
(9)
Dielectric strength
MV mÿ1
Ð
14.6
(4)
Resistivity
ohm cm
Ð
5 1016
(4)
Thermal conductivity k
W mÿ1 Kÿ1
Ð
0.26
(11)
Melt index
g (10 min)ÿ1
Ð
6.5
(4)
Water absorption
%
24 h
0.3
(4)
Intrinsic viscosity
cm3 gÿ1
258C in chloroform
End group
(12)
Mol. Mol. Mol. Mol.
wt: 5,720 wt: 9,934 wt: 17,500 wt: 21,230
NH2
Cl
t-Butyl
0.16 0.23 0.29 0.34
0.16 Ð Ð Ð
Ð 0.24 0.30 0.33
REFERENCES
1. Colthup, N., L. Daly, and S. Wiberley. Introduction to Infrared and Raman Spectroscopy, 2d ed. Academic Press, New York, 1975. 2. Pouchert, C. The Aldrich Library of FT-IR Spectra. Aldrich Chemical, Milwaukee, 1985. 3. Zoller, P. J. Polym. Sci., Polym. Phys. Ed., 16 (1978): 1,261. 4. Elias, H., and F. Vohwinkel. New Commercial Polymers 2. Gordon and Breach Science Publishers, New York, 1986, chap. 8. 5. Matsuura, T., P. Blais, and S. Sourirajan. J. Appl. Polym. Sci. 20 (1976): 1,515. 6. Aitken, C., J. McHattie, and D. Paul. Macromolecules 10 (1992): 2,910. 7. Ma, C. In Proc. of the Natl. SAMPE Symp. Exhib., 30 (Adv. Technol. Mater. Processes), 1985, p. 543. 8. Hisue, E., and R. Miller. In Proc. of the Natl. SAMPE Symp. Exhib., 30 (Adv. Technol. Mater. Processes), 1985, p. 1,035. 9. Hwang, E., T. Inoue, and K. Osaki. Polym. Eng. Sci. 34 (1994): 135. 10. Brandrup, J., and E. H. Immergut, eds. Polymer Handbook, 3d ed. John Wiley and Sons, New York, 1989. 11. Mark, H., et al., eds. Kirk-Othmer: Encyclopedia of Chemical Technology, 3d ed. WileyInterscience, New York, 1984. 12. Yoon, T., et al. Macromol. Symp., 98 (35th IUPAC International Symposium on Macromolecules), 1995, p. 673.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
29
Carborane-containing polymers EDWARD N. PETERS AND R. K. ARISMAN ACRONYM, TRADE NAME CLASS
SiB, Dexsil (Olin Corp.)
Cage structure polymers; Dn -carborane siloxanes
ÿSi
CH3 2 CB10 H10 CSi
CH3 2 ÿOÿfSi
CH3 2 ÿOÿgnÿ1 ÿ, where CB10 H10 C is as follows:
STRUCTURE
= BH
=C
Liquid phase in gas chromatography. High-temperature elastomer used to formulate gaskets, O-rings, and wire coatings. Can be fabricated like conventional silicones.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
¯ame resistance.
Elastomeric. Very high thermal stability. Outstanding
IR (characteristic absorption frequencies)
1 n
Assignment C±H
1 3 4 5
2,963; 2,960; 2,963; 2,963;
2,904 2,900 2,904 2,904
B±H
CH3
2,600 2,595 2,600 2,594
1,410; 1,411; 1,411; 1,410;
Si±C
1,090 1,090; 1,048 1,095; 1,047 1,065; 1,030
800 801 800 800
Wave numbers (cmÿ1 ) for ÿSi
CH3 2 CB10 H10 CSi
CH3 2 ÿOÿfSi
CH3 2 ÿOÿgnÿ1 ÿ.
PROPERTY
UNITS
NMR
Proton NMR in CDCl3 At 60 MHz at 100 MHz
Solvents
Ð
Nonsolvents
Ð
Mark Houwink parameters: K and a 30
1,262 1,263 1,260 1,263
Si±O
CONDITIONS
ÿ1
K ml g a None
VALUE
REFERENCE
(2) (1) At 258C
Diethyl ether Chlorobenzene
(2) (3)
At 258C
Methanol
(3)
Ð
ÿ4
K 1:02 10 a 0:72
Ð
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Carborane-containing polymers PROPERTY
Density
Glass transition temperature
UNITS ÿ3
g cm
K
CONDITIONS
R1
R2
R3
n
CH3
CH3
2
1.074
CH3
Phenyl (33) CH3 (67)
CH3 (67) Phenyl (33) Phenyl (33) CH3 (67)
2
1.123
R1
R2
R3
n
CH3 CH3
CH3 CH3
Ð CH3
1 2
CH3 CH3 CH3 CH3 CH3
CH3 CH3 CH3 CH3 CH3
CH3
CH3
CH3 CH3
CH2 CH2 CF3 CH3 CH2 CH2 CF3 CH2 CH2 CF3 CH2 CH2 CF3
Phenyl Phenyl (33) CH3 (67) Phenyl (24) CH3 (76) CH2 CH2 CF3 CH3 CH2 CH2 CF3 CH2 CH2 CF3 CH2 CH2 CF3
CH3 CH3 CH3 Phenyl CH3 (33) Phenyl (67) CH3 (67) Phenyl (33) Phenyl Phenyl (33) CH3 (67) Phenyl (24) CH3 (76) Ð CH2 CH2 CF3 CH3 CH2 CH2 CF3 CH2 CH2 CF3
R1
R2
R3
n
CH3 CH3
CH3 CH3
Ð CH3
1 2
CH3
CH3
CH3
3
R1
R2
R3
n
CH3
CH3
CH3
Phenyl (33)
CH3 (33) Phenyl (67) Phenyl (33)
R1
R2
R3
n
CH3
CH3
CH3
Phenyl (33) CH3 (67)
CH3 (33) Phenyl (67) Phenyl (33) CH3 (67)
CH3
Melting temperature
Tensile modulus²
Tensile strength²
K
MPa
MPa
VALUE
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
REFERENCE
(4)
3 4 5 2 2
298 243 223 205 203 185 261 251
(5) (5) (5) (7) (7) (7) (6) (6)
2
236
(6)
2 2
295 248
(6) (6)
2
240
(6)
1 2 2 2 3
301 244 261 270 270
(8) (9) (9) (9) (8)
513 339 341, 363 313
(5) (5) (5) (7)
2
3.45
(10)
2
2.97
(11)
2
3.58
(10)
2
5.10
(11)
31
Carborane-containing polymers PROPERTY
Maximum extensibility
²
UNITS
CONDITIONS
%
R1
R2
R3
n
CH3
CH3
CH3
Phenyl (33) CH3 (67)
CH3 (33) Phenyl (67) Phenyl (33) CH3 (67)
R1
R2
R3
n
CH3 CH3
CH3 CH3
CH3 CH3
2 4
R1
R2
R3
n
CH3 CH3
CH3 CH3
CH3 CH3
2 4
Dielectric constant "²
Loss factor tan ²
Pyrolyzability
%
VALUE
REFERENCE
2
130
(10)
2
220
(11) (12)
2.27 5.92 (12) 0.0053 0.52
8008C in argon
(7)
R1
R2
R3
n
CH3 CH3 CH3 CH3 CH3
CH3 CH3 CH3 CH3 CH3
Ð CH3 CH3 CH3 CH3
1 2 3 4 5
20 29 36 47 48
8008C in argon
%
For the polymer series:
R1
ÿ ÿ
K
R1
ÿ ÿ
TGA: 5% weight loss temperature in air
R1
R2
R3
n
CH3 CH3
CH3 CH3
2 2
4 5
CH3
CH3
Phenyl CH3 (33) Phenyl (67) CH3 (67) Phenyl (33)
2
6
R1
R2
R3
n
CH3
CH3
Phenyl
2
R1
R2
R3
n
CH3 CH3
CH3 CH3
1 2
>973 1,023
(13) (6)
CH3
CH3
2
>1,073
(6)
CH3 CH3
Phenyl CH3
Ð CH3 (67) Phenyl (33) CH3 (33) Phenyl (67) Phenyl CH3
2 3
>1,073 793
(6) (2)
(10) 62
R2
ÿ ÿ
Flammability Oxygen index
(6)
ÿSiCB10 H10 CSiÿOÿfSiÿOÿgnÿ1 ÿ ²
CH3 CH3 R3 Mechanical properties: for resins with 30 phr trimethylsilated amorphous silica, 2.5 phr ferric oxide, and cured with 2.5 phr dicumyl peroxide.
32
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Carborane-containing polymers Synthesis n
Solvent
Catalyst
Temp. (8C)
Monomers
Reference
1
Ð
FeCl3
175±225
1,7-bis-(methoxydimethylsilyl)-mcarborane 1,7-bis-(chlorodimethylsilyl)-m-carborane
(14)
2
Chlorobenzene
Ð
ÿ10
1,7-bis-(hydroxyldimethyl)-m-carborane bis(N-phenyl-N0 tetramethyleneureido)silane
(3)
3
Diethyl ether/THF/water
Ð
25
1,7-bis-(chloro-1,1,3,3-tetramethyldisilyl)m-carborane
(2)
REFERENCES
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
Mohadger, Y., M. B. Roller, and J. K. Gillham. J. Applied Polymer Sci. 17 (1973): 2,635. Knollmueller, K. O., et al. J. Polym. Sci.: Part A-1, 9 (1971): 1,071. Hedaya, E., et al. J. Polym. Sci., Polym. Chem. Ed., 15 (1977): 2,229. Peters, E. N. Ind. Eng. Chem. Prod. Res. Dev. 23 (1984): 28. Zaganiaris, E. J., L. H. Sperling, and A. V. Tobolsky. J. Macromol. Sci.: Chem., A-1(6) (1967): 1,111. Peters, E. N., et al. J. Polymer Sci., Polym. Phys. Ed., 15 (1977): 723. Roller, M. B., and J. K. Gillham. J. Appl. Poly. Sci. 17 (1973): 2,141. Scott, R. N., et al. J. Polym. Sci., Part A-1, 10 (1972): 2,303. Peters, E. N., et al. J. Polym. Sci., Polym. Chem. Ed., 15 (1977): 973. Peters, E. N., et al. Rubber Chem. Technol. 48 (1975): 14. Peters, E. N., et al. J. Elastomers Plast. 10 (1978): 29. Schroeder, H., et al. Rubber Chem. Technol. 39 (1966): 1,184. Roller, M. B., and J. K. Gillham. J. Appl. Poly. Sci. 17 (1973): 2,623. Papetti, S., et al. J. Polym. Sc.: Part A-1, 4 (1966): 1,623.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
33
Carboxylated ethylene copolymers, metal salts (ionomers) RUSKIN LONGWORTH TRADE NAME CLASS
Surlyn (Du Pont)
Chemical copolymers; ethylene copolymers
ÿ
CH2 ÿCH2 n ÿCH2 ÿC
CH3
Co2 Na m ÿ ÿCH2 ÿCH2 ÿCCH3
CO2 ÿHl ÿ Typically, if n m l 100, then m l is 1±5.
STRUCTURE
The Surlyn brand of ionomers consists of copolymers of ethylene with methacrylic acid, partially or wholly neutralized with a variety of metals, including sodium, zinc, and lithium.
1; 2 The neutralization process drastically increases the melt viscosity and decreases the solubility, making molecular weight determinations of the ®nal product impossible. However, the metal ions can be removed by treatment with acids, and the unneutralized copolymer examined by methods similar to those used for low density polyethylene (LDPE) and copolymers thereof. In certain cases, the properties of the ionomer resemble LDPE; where applicable, these values are given in italics. About twenty grades of Surlyn plastics exist. Here we report on two representative samples: sodium (Na) neutralized and zinc (Zn) neutralized. Where experimental conditions are described by a ``D-'' number, these refer to test procedures of the American Society for Testing Materials.
GENERAL INFORMATION
Moldings (e.g., golf ball covers, ski boots) and ®lm (e.g., meat packaging, coextrusions).
MAJOR APPLICATIONS
Preparative techniques
1 Method
Conditions
Free radical polymerization Ceiling temperature Comonomer Post-synthesis adducts
Peroxide initiator, high pressure (>100 MPa) 550 K Methacrylic acid Sodium, lithium, zinc
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight (of repeat unit)
g molÿ1
Ð
28
Ð
Molecular weight (of acid comonomer)
g molÿ1
Ð
86
(1)
Tacticity
Ð
Ð
Random
Ð
Trans unsaturation
Ð
Ð
0.025/1,000C
(3)
34
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Carboxylated ethylene copolymers, metal salts (ionomers) PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Vinylidene unsaturation
Ð
Ð
0.15/1,000C
(3)
Short-chain branching
Ð
Ð
2/100C
(3)
Long-chain branching
Ð
Ð
1/1,000C
(3)
Molecular weight (Mw )
g molÿ1
Ð
500,000
(3)
Polydispersity
Ð
Ð
10
(3)
Morphology
Ð
Three phases
Semicrystalline PE Amorphous PE Ionic clusters (ionic comonomers with some PE)
(1)
IR (characteristic absorption frequencies)
cmÿ1
Hydrogen-bonded hydroxyl Unionized carbonyl Carboxylate
2,650 1,700 1,560
(4)
Thermal expansion coef®cient
Kÿ1
D-696 Na Zn
5:9 10ÿ5 5:7 10ÿ5
Density
g cm3
Na Zn Amorphous
0.95 0.94 0.855
(2) (2) (5)
Degree of crystallinity
%
Na; annealed 4 h at 348 K
30
(6)
Heat of fusion
kJ molÿ1
Na; annealed 4 h at 348 K
2.32
(6)
Density
g cm3
Crystalline PE
1.014
(7)
Transition temperatures
K
Amorphous polyethylene Crystalline polyethylene (M.P.) Beta transition (amorphous hydrocarbon) Ionic transition (order-disorder)
148 373 253
(1)
331
Heat capacity
kJ Kÿ1
Ð
4.2±5.0
De¯ection temperature
K
Vicat, D-1525 Na Zn
337 346
Flex modulus
MPa
D-790, 298 K Na Zn
350 130
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(2)
(2) (2)
(2)
35
Carboxylated ethylene copolymers, metal salts (ionomers) PROPERTY
UNITS
CONDITIONS
VALUE
Tensile modulus
MPa
Secant modulus, D-882, 298 K Na Zn
290 280
Storage modulus (1 Hz, G0 )
MPa
Na 193 K 273 K 295 K 334 K
1,000 330 205 30
Loss modulus (1 Hz, G00 )
MPa
Na 193 K 273 K 295 K 334 K
25.9 32.3 20.9 6.2
Tensile strength
MPa
D-638, 296 K Na Zn
33.1 21.4
Yield strength
MPa
D-638, 296 K Na Zn
15.9 8.3
Maximum elongation
%
Na Zn
470 500
Flex modulus
MPa
D-790, 296 K Na Zn
350 130
Impact strength
J mÿ1
D-250, notched Izod, 296 K Na Zn
1:02 105 No break
Tensile impact strength
J mÿ2
D-1822S Na; 296 K Na; 233 K Zn; 296 K Zn; 233 K
1,020 760 925 560
Hardness
Shore D
Na Zn
65 54
(2)
Entanglement molecular weight
Ð
Ð
15,000
(1)
36
REFERENCE
(8)
(1)
(1)
(2)
(2)
Ð Ð
(2)
(2)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Carboxylated ethylene copolymers, metal salts (ionomers) PROPERTY
UNITS
CONDITIONS
VALUE
Abrasion resistance
Ð
D-1630 Na Zn
370 170
Index of refraction
Ð
Zn
1.49
(7)
Dielectric constant
Ð
Na; 1 kHz, 296 K
3.8
(9)
Dielectric loss
Ð
Na; 1 kHz, 296 K
4:0 10ÿ3
(9)
Strain-optical coef®cient Ks
Ð
Na; maximum at 331 K
2:4 10ÿ2
(10)
Permeability
m3 m sÿ1 mÿ2 Paÿ1
Oxygen, 296 K Na Zn Water vapor, 296 K; Na, Zn
1:80 10ÿ17 2:00 10ÿ17 7:00 10ÿ12
g m sÿ1 mÿ2 Paÿ1 Viscosity
Pa s (104 )
Piston rheometer; shear rate 1.30 sÿ1 Na at 393 K Na at 413 K Na at 433 K
5.18 2.85 1.61
(2)
(7) Ð Ð
Melt index
g sÿ1 (10ÿ3 )
D-1238-57-T, condition E Na, shear rate 7.0 sÿ1 Zn, shear rate 4.0 sÿ1
4.7 2.7
Maximum use temperature (heat de¯ection temperature)
K
D-648, 455 kPa Na Zn
317 313
Flammability
cm sÿ1
D-635 Na Zn
3.81 3.38
Water absorption
wt%
Saturation, 296 K Na (3 mol% carboxylate) Na (6 mol% carboxylate)
11 29
Haze
%
D-1003 Na Zn
3.0 7.0
Clarity
%
D-1746; Na, Zn
40±60
Elmendorf tear strength
N mmÿ1
D-1922 Na (MD, TD) Zn (MD, TD)
3.2 20.0
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
REFERENCE
Ð
(2)
(2)
(1)
Ð
Ð Ð
37
Carboxylated ethylene copolymers, metal salts (ionomers) PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
Ð
3.33±4.02
Ð
Cost
US$ kg
Important patent
Rees, R. W. U.S. Patent 3,264,272 (assigned to E. I du Pont de Nemours and Co.)
Supplier
E. I. du Pont de Nemours and Co., Du Pont Polymers, Wilmington, Delaware 19898, USA
REFERENCES
1. Longworth, R. In Ionic Polymers, edited by L. Holliday. Applied Science Publishers, Barking, U.K., 1975, chap. 2. 2. Surlyn Product Guide. E. I. du Pont de Nemours and Co. 3. Groenewege, M. P., et al. In Crystalline Ole®n Polymers I, edited by R. A. V. Raff and K. W. Doak. Interscience Publishers, New York, 1965. 4. MacKnight, W. J. et al. J. Phys. Chem. 72 (1968): 1,122. 5. Allen, G., G. Gee, and G. J. Wilson. Polymer 1 (1960): 456. 6. Marx, C. L., and S. L. Cooper. Die Makromolekulare Chemie 168 (1973): 339. 7. Walter, E. R., and F. P. Reding. J. Polym. Sci. 21 (1956): 561. 8. Surlyn Selector Guide: Film. E. I. du Pont de Nemours and Co. 9. Phillips, P. J., and W. J. MacKnight. J. Polym. Sci., Part A-2, 8 (1970): 727. 10. Kajiyama, T., R. S. Stein, and W. J. MacKnight. J. Appl. Phys. 41 (1970): 4,361.
38
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose RACHEL MANSENCAL ALTERNATIVE NAMES CLASS
Rayon, cellophane, regenerated cellulose
1
Carbohydrate polymers; polysaccharides
STRUCTURE
OH O
CH2OH O
OH O
O
OH
OH
CH2OH
O
n
It is the basic structural material of the cell walls of all higher land plants and of some seaweeds.
2ÿ8
FUNCTIONS
Wood (coniferous, deciduous), bamboo, cotton, hemp, straw, jute, ¯ax, reed, sisal. Cellulose is isolated from the plant cell walls and is never in a pure form in nature. Always associated with lignin and hemicellulose.
2ÿ4
NATURAL SOURCES
Source
4
Cellulose (%)
Cotton Hemp Flax Kapok Sisal Ramie Jute Wood (coniferous or deciduous) Bamboo Straw
94 77 75 75 75 73 63 50 40±50 40±50
BIOSYNTHESIS
Depends on the system.
6ÿ8
Natural cellulose is used as fuel and lumber. Puri®ed cellulose is employed for production of paper and textiles. Derivatives of cellulose are used in plastics, ®lms, foils, glues, and varnishes. Most of the cellulose is used in paper and paperboard manufacture.
4
COMMERCIAL USES
The separation process of cellulose from hemicellulose and lignine is by pulping. The two different kinds of pulping are mechanical and chemical.
2ÿ4; 6
EXTRACTION
Cellulose is the most abundant macromolecular material naturally occurring in plant cell walls. Semicrystalline natural polymer. Very dif®cult to dissolve.
2ÿ7
PROPERTIES OF SPECIAL INTEREST
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
39
Cellulose PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
Ð
106
(6)
Average molecular weight
g mol
Speci®c gravity
g cmÿ3
In heptane In benzene In water
1.540 1.570 1.604±1.609
(4)
Cellulose ®bril size
nm
Subelementary Elementary
1.5 3.5
(4)
X-ray density
g cmÿ3
Crystalline portion Amorphous portion
1.590±1.630 1.482±1.489
(4)
Average crystallinity
%
Native
70
(4)
Optical refractive index
Ð
nD
1.618 1.599 1.600 1.595 1.543 1.532 1.531 1.534
(4)
Insoluble
(5)
jj
n? D
Solubility
Ð
Solubility parameters
Water, organic solvent, dilute acid, alkalies Cuprammonium hydroxide Cupriethylenediamine hydroxide Cadmium ethylene diamine hydroxide Iron sodium tartrate complex
(MPa)1=2
Ð
Soluble (complex formation)
32.02
(1)
Unit cell dimensions
2; 8; 9 Isomer
Space group
Monomers per unit cell
monoclinic
21
Cellulose II monoclinic
21
2 (parallel arrangement of the chains) 2 (antiparallel arrangement of the chains)
Cellulose I
40
Lattice
Cell dimension (AÊ)
Cell angles (degrees)
a
b (®ber axis)
c
9.35
10.3
7.9
96.0
8.0
10.3
9.0
117
For ramie and cotton.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose PROPERTY
UNITS
CONDITIONS
Polymorphs
Cellulose I, II, III, IV, III-1, III-2, IV-1, IV-2
Degree of crystallinity
%
VALUE
REFERENCE
(2)
Determined by X-ray diffraction Type of cellulose Cellulose (valonia ventricosa) Different wood pulps Ramie
0.68 0.62±0.70 0.60±0.71
(5, 10) (5, 10, 11) (5, 10, 11)
Thermal conductivity c
W mÿ1 Kÿ1
Cotton, 293 K Rayon Sul®te pulp, wet Sul®te pulp, dry Laminated kraft paper Different papers, 303±333 K
0.071 0.054±0.07 0.8 0.067 0.13 0.029±0.17
(1, 5, 13) (1, 5, 14) (1, 5, 15) (1, 5, 15) (1, 5, 16) (1, 5, 17)
Thermal expansion coef®cient (linear expansion) for different papers
Kÿ1 (10ÿ6 )
Machine direction Cross-machine direction
2±7.5 7.9±16.2
(5, 18)
Speci®c heat
J gÿ1 Kÿ1
Ð
1.22
(4)
Heat of combustion
kJ gÿ1
Ð
17.43
(4)
Dielectric constant
Ð
Crystalline portion
5.7
(4)
Isolation resistance
ohm cm
Ð
2 104
(4)
Insulating value
kV cmÿ1
Ð
500
(4)
Thermal decomposition
K
Ð
523
(4)
Start of thermal degradation
K
Linters Bleached sul®te pulp Kraft pulp Filter paper (under nitrogen)
498 498 513 493
(19) (19) (19) (20)
Fast endothermal degradation
K
Linters Bleached sul®te pulp Cotton (under nitrogen) Cellulose powder (thermogravimetry)
573 603 563 563
(19) (19) (4) (21, 22)
Ignition temperature
K
Cotton Viscose rayon
663, 673 693
(14, 23) (23)
Self ignition temperature
K
Cotton
673
(4)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
41
Cellulose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
External ignition temperature
K
Cotton
623
(4)
Maximum ¯ame temperature
K
Cotton 19% O2 25% O2
1,123 1,323
(4, 5) (5, 24)
Heat capacity
kJ kgÿ1 Kÿ1
Cellulose Cotton Mercerized cotton Ramie Flax Hemp Jute Viscose rayon Paper
1.34 1.22 1.235 1.775 1.344±1.348 1.327±1.352 1.357 1.357 1.17±1.32
(5, 25) (5, 26) (5, 26) (5, 27) (5, 28) (5, 28) (5, 28) (5, 28) (5)
Heat of crystallization
kJ kgÿ1
Cellulose I Cellulose II
121.8 134.8
(5) (5)
Heat of recrystallization
kJ kgÿ1
Amorphous cellulose ! Cellulose I
41.9
(5, 29)
Heat of transition
kJ kgÿ1
Cellulose I ! Cellulose II
38.1
(5, 30)
Heat of formation
kJ kgÿ1
Ð
5949.7
(5, 31)
Heat of solution of dry material
kJ kgÿ1
Cotton in cupriethylendiamine Cotton in Et3 PhNOH Rayon in Et3 PhNOH Cellulose II in Et3 PhNOH
108.0 142.5 95.5 182.7
(5, (5, (5, (5,
Yields of scission G
S
mmol Jÿ1
Electron beam or -irradiation
11
(5, 35)
Glass transition temperature
K
Ð
503 493±518
(5)
Secondary transition
K
Ð
292±296 298
(5)
Tensile strength
MPa Ramie Cotton Flax Viscose rayon Viscose rayon, highly oriented Cellulose acetate
42
Dry
Wet
900 200±800 824 200±400 610 150±200
1,060 200±800 863 100±200 520 100±120
32) 33) 34) 33)
(4)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Relative wet/dry strength
%
Ramie Cotton Flax Viscose rayon Viscose rayon, highly oriented Cellulose acetate
117 105 105 50 86 65
(4)
Extension at break
%
Elastic modulus
Dry
MPa
Wet
Ramie Cotton Flax Viscose rayon Viscose rayon, highly oriented Cellulose acetate
2.3 16±12 1.8 8±26 9 21±30
Native ¯ax Native hemp Native ramie Mercerized ramie Oriented rayon Cellulose acetate ®lm
78,000±108,000 59,000±78,000 48,000±69,000 80,000 33,000 4,000
(4)
2.4 6±13 2.2 13±43 9 29±30 (4)
Void system determination by X ray small angle scattering Cellulose
Relative internal surface (AÊ2 AÊÿ3 )
Speci®c internal surface (m2 gÿ1 )
Conditions
Reference
Microcrystalline
0.09273 0.0714 0.07232 0.12800
2.93 1.74 1.10 2.08
Average values
(5, 36, 37)
Ð
(5)
Micro®ne
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Permeability to gases
Ð
Cellulose, 258C, pressure not speci®ed
H2 , N2 , O2 , CO2 , SO2 , H2 S, NH3
(5, 38)
Density
g cmÿ3
Cellulose I Cellulose II Cellulose IV Cotton Ramie Flax Hemp Jute Wood pulps
1.582±1.630 1.583±1.62 1.61 1.545±1.585 1.55 1.541 1.541 1.532 1.535±1.547
(5, 39±41) (5, 40) (5) (5, 42±44) (40) (5) (5) (5) (5, 40, 45)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
43
Cellulose PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
Heat of adsorption of water, Hads
Jg
Cotton, 258C Holocellulose, 258C Bleached sul®te pulp, 208C Cellophane, 258C Viscose rayon, 258C
384 344 348 358 397
(4)
IR (characteristic absorption frequencies)
cmÿ1
Cellulose I
3,125±3,660; 3,375; 3,275; 2,970; 2,960; 2,945; 2,900; 1,760; 1,730±1,740; 1,550±1,650; 1,035; 1,025; 1,015; 700; 740 6,770; 3,464±3,490; 3,444±3,450; 3,374±3,394
(4)
Cellulose II
Optical con®guration parameters
1; 46 Cellulose
Cellulose Cellulose Cellulose Cellulose
acetate DS 2:4 benzoate DS 3:0 nitrate DS 1:9 nitrate DS 1:9
Delta alpha (A3 )
Diluent
0 ÿ617 ÿ62 149
Pyridene Dimethylformamide Cyclohexanone Dioxane
DS Degree of substitution.
Mark-Houwink parameter : K and a Solvent
Temp. (8C)
Km 102 (ml gÿ1 )
a
0 Km (ml gÿ1 )²
Viscosity range Method of 10ÿ2 (ml gÿ1 ) calibration
Reference
Cuoxam
a
20 25 25 25 25 25
0.308 11.3 10.1 Ð 0.498 Ð
1.0 0.657 0.661 0.905 1.0 1.0
0.5 3.19 2.91 1.33 0.807 0.435
0.9±9 0.2±4 0.2±4 1±21.4 2.4±21.4 0.5±7.5
(5, (5, (5, (5, (5, (5,
Cuene
b Cadoxene
c
Osmotic Visco
d Visco
d Visco
d Ð Visco
d
47) 48) 48) 49, 50) 49, 50) 51)
For cellulose; from osmotic measurements on fractionated samples. 0 Km is relating intrinsic viscosity and degree of polymerization
a Cuoxam: cuprammonium hydroxide.
b Cuene: cupriethylenediamine.
c Cadoxene: cadmiumethylenediamine.
d Visco: viscosimetric comparison. ²
44
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose PROPERTY
Martin coef®cient K
0
Huggins coef®cient K00
Schulz-Blaschke coef®cient K000
UNITS
CONDITIONS
Ð
Cellulose Solvent Cuene Cuoxam²
Ð
Ð
Cellulose Solvent Cuoxam² Cadoxene³ Cellulose Solvent Cuene Cuoxam² Cadoxene³
Second virial coef®cient A2
Sedimentation coef®cients s0
mol cm3 gÿ2 (104 )
s 1013
Cellulose Hydrolyzed linters; cadmium ethylene diamine solvent; 258C; M
225± 945 10ÿ3 g molÿ1 ; light scattering Sul®te pulp; M 215 10ÿ3 g molÿ1 ; light scattering Cellulose in solution Cuene ; 258C M 175 10ÿ3 g molÿ1 M 9:5 10ÿ3 g molÿ1 Cadoxene³ ; 128C M 33:6 10ÿ3 g molÿ1 M 24:5 10ÿ3 g molÿ1 M 18:8 10ÿ3 g molÿ1 M 10:1 10ÿ3 g molÿ1
VALUE
REFERENCE
(5) 0.13±0.15 0.1303 0.112 (5) 0.37 0.26±0.39
0.33 0.29 0.1552 0.287 0.280
(5) (5, 52) (5, 53) (5, 52) (5)
16.1
(5)
12.1
5.5 8.3 1.25 1.13 1.04 0.74
(1, 5) (1, 5, 54)
Diffusion coef®cients D0
cm3 s
107
Frictional ratios v2
cm3 gÿ1
Cellulose in solution; cuene ; 258C; M 175 10ÿ3 g molÿ1
0.65
(1, 5)
Speci®c resistance
ohm cm
Ð
1018
(5, 55)
Dielectric constant "
Ð
106 kHz
5.5±8.1
(5, 56)
Cellulose in solution Cuene ; 258C M 175 10ÿ3 g molÿ1 M 9:5 10ÿ3 g molÿ1
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(1, 5) 1.2 0.95
45
Cellulose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Dielectric loss factor tan
Ð
208C, 0.1 kHz 208C, 1 kHz 208C, 10 kHz 208C, 102 kHz 208C, 103 kHz 208C, 104 kHz 208C, 105 kHz
0.015 0.02 0.03 0.045 0.065 0.08 0.07
(5)
Dielectric strength
kV mmÿ1
Dry (native cellulose ®ber)
50
(5, 57)
Zeta-potential
mV
Fines from ®lter paper, Whatman No. 1
21.0
(5, 58)
Surface tension
mN mÿ1
Contact angle method, at 208C Cellulose regenerated from cotton Cellulose regenerated from wood pulp
42 36±42
(5, 59)
Cuene: cupriethylenediamine. Cuoxam: cuprammonium hydroxide. ³ Cadoxene: cadmiumethylenediamine. ²
Speci®c refractive index increment in dilute solution, dn=dc (ml gÿ1 ) Solvent
0 436 nm
0 546 nm
Temp. (8C)
Reference
Acetone Cadoxene Cadoxene , (5% Cd)/water (1 : 1 vol) 0.237 M Cd Cuoxam² 0.205 M Cu Cuoxam² 0.0518 M Cu FeTNa
0.111 0.186 0.190 0.1317 0.117 0.1352 0.110
Ð 0.183 0.189 0.1927 0.233 0.2574 0.245
25 25 25 25 25 25 25
(1, 60) (1, 12, 54) (1, 61) (1, 62) (1, 5) (1, 62) (1, 63)
²
Cadoxene: cadmiumethylenediamine. Cuoxam: cuprammonium hydroxide.
Microbial biodegradation
5
46
Class
Microorganism
Bacteria
Cellvibro gilvus Clostridium thermocellum Bacteroides succinogenus Ruminococcus albus Psudonomas ¯uorescence var cellulosa Sporocytophaga myxococcides
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose Class
Microorganism
Fungi
Coriolus vesicolor Phanerochaete chrysosprium Irpex lacteus Schizophyllum commune Fomess annonus Stereum sanguinolentum Peurotus ostreatus Polyporrus schweinitzii Poria placenta Poria vailantii Coniophora cerebella Tyromyces palustris Serpula lacrymans Lentinus lepideus Chaetomium globosum Chaetomiium thermophile Trichoderma viride Trichoderma reesei Trichoderma koningii Penicillium funicolosum Fusarium solani Aspergillus aculeatus Aspergillus niger Sporotrichum thermophile Myrothecium verrucaria
Ascomycetes and fungi imperfecti
REFERENCES
1. Zhao, W., and J. E. Mark. In Physical Properties of Polymers Handbook, edited by J. E. Mark. AIP Press, Woodbury, N.Y., 1996. 2. Huang, Y., and J. Chen. In Polymeric Materials Encyclopedia, edited by J. C. Salamone. CRC Press, Boca Raton, Fla., 1996, vol. 2. 3. James, D. W. Jr, J. Preiss, and A. D. Elbein. In The Polysaccharides, edited by G. O. Aspinall. Academic Press, New York, 1985, vol. 3. 4. Dane, J. R. In Encyclopedia of Polymer Science and Engineering, 2d ed., edited by H. F. Mark, et al. John Wiley and Sons, New York, 1989, vol. 3. 5. GroÈbe, A. In Polymer Handbook, 3d ed., edited by J. Branrup and E. H. Immergut. John Wiley and Sons, New York, 1989. 6. Tarchevsky, I. A., and G. N. Marchenko, eds. Cellulose: Biosynthesis and Structure. SpringerVerlag, New York, 1991. 7. Brown, R. M. Jr., ed. Cellulose and Other Natural Polymer Systems. Plenum Press, New York, 1982 8. Kennedy, J. F., G. O. Phillips, and P. A. Williams, eds. Cellulose, Structural and Functional Aspects. Ellis Horwood Ltd., Chichester, 1989 9. Kolpak, F. J., and J. Blackwell. Macromolecules 273 (1976): 1. 10. Hermans, P. H.and A. Weidinger. J. Polym. Sci. 5 (1950): 565. 11. Hermans, P. H. Makromol. Chem. 6 (1951): 25. 12. Henley, D. Swensk Papperstidn 63 (1960): 143. 13. Hammons, M. A., and W. A. Reeves. Textiles Chem. Colourists 14 (1982): 26/210. 14. Goerlach, H. Chemiefasern 22(6) (1972): 524. Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
47
Cellulose 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63.
48
Guthrie, J. C. J. Textile Inst. 40 (1949): T489. Terada, T., N. Ito, and Y. Goto. Kami Pa Gikyoshi 23 (1969): 191. Terasaki, K., and K. Matsuura. Kami Pa Gikyoshi 26(4) (1972): 173. Kubat, J., S. Martin-Loef, and Ch. Soeremark. Swensk Paperstidn. 72 (1969): 763. Otmar, T., H. Dreilheller, and G. Grossberger. Ger. Offen. 1 (1971): 964. Broido, A., and S. B. Martin. U.S. Dept. Com., Of®ce Tech. Serv., AD 268 (1961): 729. Fu, Y. L., and F. Sha®zadeh. Carbohydr. Res. 29(1) (1973): 113. Sha®zadek, F., and Y. Sekiguchi. Carbon 21 (1983): 511. The Flammability of Textile Fibers, Bull. X-45. E. I. DuPont de Nemours, Wilmington, 1955. Miller, B., et al. Textile Res. J. 46 (1976): 531. National Research Council (U.S.). International Critical Tables. McGraw-Hill, New York, 1926±1930, vol. II, p. 237. Magne, F. C., H. J. Portas, and H. Wakeham. J. Am. Chem. Soc. 69 (1947): 1,896. Mikhailov, N. V., and E. Z. Fainberg. Vysokomol. Soedin. 4 (1962): 230. Goetze, W., and F. Winkler. Faserforsch. Textiltechn. 18 (1967): 119. Hermans, P. H., and A. Weidinger. J. Am. Chem. Soc. 68 (1946): 2,547. Lauer, K. Kolloid-Z. 121 (1951): 139. Jessup, R. S., and E. I. Proser. J. Res. Natl. Bur. Std. (1950): 44. Calvet, E., and P. H. Hermans. J. Polym. Sci. 6 (1951): 33. Lipatov, S. M., D. V. Zharkovskii, and I. M. Zagraevskaya. Kolloidn. Zh. 21 (1959): 526. Mikhailov, N. V., and E. Z. Fainberg. J. Polym. Sci. 30 (1958): 259. Charlesby, A. J. Polym. Sci. 15 (1955): 263. Schurz, J., and A. Janosi. Das Papier 36 (982): 584. Schurz, J., and A. Janosi. Holzforschung 36 (1982): 307. Simril, V. L., and A. Hershberger. Modern Plastics 27 (1950): 95. Kast, W., and R. Schwarz. Z. Electrochem. 56 (1952): 228. Hermans, P. H. Contribution to the Physics of Cellulose Fibers. Elsevier, New York, 1946. Lyons, W. J. J. Chem. Phys. 9 (1941): 377. Stamm, A. J., and L. A. Hansen. J. Phys. Chem. 41 (1937): 1,007. Wakeham, H. Textile Res. J. 19 (1949): 595. Hermans, P. H., J. J. Hermans, and D. Vermas. J. Polymer Sci. 1 (1946): 149, 156, 162. Brenner, F. C., V. Frilette, and H. Mark. J. Am. Chem. Soc. 70 (1948): 877. Tsvetkov, V. S. Rigid-chain Polymer Molecules. Nauka, Moscow, 1985. Staudinger, H., and G. Daumiller. Ann. Chem. 529 (1937): 219. Cumberbirch, R. J. E., and W. G. Harland. J. Textile Inst. 49 (1958): T679. Immergut, E. H., J. Schurz, and H. F. Mark. Monatsh. Chem. 84 (1953): 219. Immergut, E. H., B. G. Ranby, and H. F. Mark. Ind. Eng. Chem. 45 (1953): 2,483. Prati, G., and L. Errani. Tincoria 59 (1962): 233, 279. Marx, M., and G. V. Schulz. Makromol. Chem. 31 (1959): 140. Schulz, G. V., and F. Blaschke. J. Prakt. Chem. 158 (1941): 130. Brown, W., and R. Wirkstroem. Eur. Polym. J. 1 (1965): 1. Murphy, E. J. Can. J. Phys. 41 (1963): 1,022. Claussnitzer, W. In Landolt-Boerstein, Zalhenwerte und Funktionen, 6th ed. Springer-Verlag, Berlin, 1957, vol. IV, part 3. Meyer, K., and H. Mark. Makromoleculare Chemie, 2d ed. Akad. Verlag, Leipzig. 1950. McKenzie, A. W. APPITA 21(4) (1968): 104. Luner, P., and M. Sandell. J. Polym. Sci. c28 (1969): 115. Marx-Figini, M., and E. Penzel. Makromol. Chem. 87 (1965): 307. Huglin, M. B., S. J. O'Donohue, and P. M. Sasia. J. Polym. Sci. Polym., Phys. Ed., 26 (1988): 1,067. Vink, H., and G. DahlstroÈm. Makromol. Chem. 109 (1967): 249. Valtasaari, L. Tappi 48 (1965): 627.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose acetate YONG YANG ACRONYM CLASS
CA
Carbohydrate polymers
STRUCTURE
CH2OR O
H O
H OR
H
H
OR
H
(R is COCH3 or H) Textile ®bers, cigarette ®lters, plastics for molding and extrusion, ®lms for photography and recording tape, sheeting, lacquers, protective coatings for paper, metal, and glass, adhesive for photographic ®lm, membranes.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
tolerances.
White, ordorless, nontoxic, wide range of solvent
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight (of repeat unit)
g molÿ1
Degree of substitution
DS 3:0
288.25
Ð
Preparation (acetylation)
Cellulose Acetic anhydride ÿÿÿÿÿÿÿ! Cellulose acetate
(1)
IR (characteristic absorption frequencies)
cmÿ1
Assignment (OH) stretching (CH3 ) asymmetric stretching (CH3 ) symmetric stretching (CO ) stretching ((CH3 ) asymmetric deformation (CH3 ) symmetric deformation Acetate CÿCÿO stretching (CÿO) stretching Structural factor
(2±4)
NMR
Ð
13
Thermal expansion coef®cient
Kÿ1
Density
g cmÿ3
H2 SO4 = ÿH2 O
C and 1 H
3,400 2,950 2,860 1,750 1,432 1,370 1,235 1,050 603 Ð
(5)
Sheet
10±15 10ÿ5
(6)
Ð
1.29±1.30
(1)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
49
Cellulose acetate Solvents and nonsolvents DS
Solvent
Nonsolvent
Reference
0.6±0.8 1.3±1.7 2±2.5
Water 2-Methoxyethanol Acetic acid , acetone , acrylic acid , aniline, benzyl alcohol, cyclohexanone, p-chlorophenol , m-cresol , dichloroacetic acid , diethanolamine, di¯uoroacetic acid , N,N-dimethylacetamide , dimethylformamide , 1,5-dimethyl-2-pyrrolidone , dimethylsulfoxide , 1,4-dioxane , ethylene glycol ether, ethyl acetate, formic acid , glycol sul®te , hexa¯uoroisopropanol , methyl acetate, n-methylpyrrolidone-2 , naphthol , nitrobenzene/ethyl acetate, nitromethane , phenol , phosphoric acid , pyridine , tetra¯uoro-n-propanol , tetra¯uoroisopropanol , tri¯uoroacetic acid , tri¯uoroethanol Acetic acid acetone , acetone/water (8:2), aniline , chloroform, m-cresol , dichloroacetic acid , dichloromethane , N,N-dimethylacetamide , dimethylformamide , dimethylsulfoxide , 1,4-dioxane , ethyl acetate, ethylene carbonate, ethylene glycol ether acetates, methyl acetate , methylene chloride, methylene chloride/ethanol (8:2), nitromethane , 3-picoline , 4-picoline , n-propyl acetate , pyridine , tetrachloroethane , tetrahydrofuran, tri¯uoroacetic acid , tri¯uoroethane, tri¯uoroethanol
Ð Acetone, water Hydrocarbons, aliphatic ethers, weak mineral acids
(7) (7±9) (7±9)
Aliphatic hydrocarbons, benzene, dichloroethane, chlorobenzene, o-chlorotoluene, ethanol, aliphatic ethers, weak mineral acids
(7±9)
3.0
Forms liquid crystalline mesophase.
Solubility parameter DS
Solvent
Method
[(MPa)1=2 ]
Reference
1.9 2.3
Ð Acetone m-Cresol Dioxane Methyl acetate -Picoline - Picoline
- Picoline Pyridine Ð Ð Ð Ð
Heat of solution/solvation Osmotic pressure Osmotic pressure Osmotic pressure Osmotic pressure Osmotic pressure Osmotic pressure Osmotic pressure Osmotic pressure Gel swelling Intrinsic viscosity maximum Heat of solution/solvation Gel swelling
27.2 23.0 21.2 22.5 22.6 21.9 22.4 22.0 22.5 24.7 21.7 27.8 27.8
(10) (11)
2.3 2.4 2.5 2.8
50
(12) (13) (10) (12)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose acetate Polymer-liquid interaction parameters
2
11; 14ÿ18
Solvent
DS
Temp. (K)
0
0:2
0:4
0:6
Acetone
2.3 2.5 2.3 2.3 3.0 3.0 3.0 2.3 2.5 2.3 2.5 2.3 2.3 2.3 2.3 2.3 2.5 2.5
298±318 303 298±318 298±318 298 303 298 298±318 303 298-318 303 298-318 298 298 298 298±318 303 286
0.44 Ð Ð Ð 0.34 Ð 0.3 0.38 0.31 0.45 Ð 0.43 0.36 0.285 0.26 0.28 Ð 0.442
Ð 0.30 0.40 0.375±0.34 Ð 0.36 Ð Ð 0.51 Ð 0.43 Ð Ð Ð Ð Ð 0.07 Ð
Ð 0.51 Ð Ð Ð 0.45 Ð Ð Ð Ð 0.59 Ð Ð Ð Ð Ð 0.09 Ð
Ð Ð Ð Ð Ð 0.51 0.49 Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð
Acetic acid Aniline Chloroform Dichloromethane 1,4-Dioxane Methyl acetate Nitromethane 2-Picoline 3-Picoline 4-Picoline Pyridine Tetrahydrofuran
Second virial coef®cients A2 Polymer
Solvent
Temp. (K)
Mw 10ÿ3 (g molÿ1 )
A2 104 (mol cm3 gÿ2 )
Reference
Cellulose acetate Cellulose diacetate
DS 2:46
Acetone Acetone
RT 285.3 298.6 311.0 363.2 323.5 303 313 323 333 313 323 323
60±173 94 Ð Ð Ð Ð 71 Ð Ð Ð 92 92 141
9.4±5.8 4.1 3.8 3.6 3.5 3.4 ÿ0.5 ÿ0.25 0 0.25 ÿ0.25 0 ÿ0.21
(19) (20)
Butanone
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(21)
51
Cellulose acetate Mark-Houwink parameters: K and a
22; 23 Solvent
DS
Temp. (K)
Mw 10ÿ4 (g molÿ1 )
K 103 (ml gÿ1 )
a
Acetone
2.0 2.25±2.38 3.0
Acetone/methylene chloride Acetone/water (80/20) Chloroform
3.0 3.0 3.0
o-Cresol Dichloromethane Dimethylacetamide
3.0 3.0 0.49 1.75 2.0 3.0 0.49 3.0
298 303 293 298 298 298 298 298 293 293 298 303 303 303 293 298 298 298 298 298 298
27 2.6±15 14 18 30 39 69 1.4±13 11 13 69 18 18 18 69 15 14 19 69 15 30
133 16 2.38 8.97 3.30 14.9 28.9 2.2 2.65 2.2 45.4 14.4 4.5 6.15 24.7 191 95.8 39.5 26.4 171 13.9
0.616 0.82 1.0 0.90 0.760 0.82 0.725 0.95 1.0 0.95 0.649 0.800 0.9 0.9 0.704 0.6 0.65 0.738 0.750 0.61 0.834
0.49 3.0 2.86 2.0 2.0 3.0 0.49
298 298 298 298 298 298 298
15 DP 150±560 Ð 30 19 69 15
20.9 1.45 5.8 51.3 52.7 39.6 20.9
0.60 0.83 0.90 0.688 0.696 0.706 0.60
Dimethyl sulfoxide Ethanol/methylene chloride (20/80 by vol.) Formaldehyde Methylene chloride Tetrachloroethane Tetrahydrofuran Tri¯uoroacetic acid Water
From K
DPa , DP degree of polymerization.
Unit cell dimension of cellulose triacetate (CTA) Lattice
CTA I CTA II
52
Orthogonal Orthorhombic Orthorhombic
Monomers per unit cell
Chain per unit cell
4 16 8
2 8 4
Cell dimension (AÊ) a
b
23.63 44.3 24.68
6.27 10.43 13.45 10.47 11.52 10.54
Space group
Density (g cmÿ3 )
Reference
P21 P21 P21 21 21
1.239 1.228 1.278
(24) (25) (26)
c
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose acetate PROPERTY
UNITS
CONDITIONS
Theta temperature
K
DS 2:46 Acetone Butanone Cellulose triacetate, acetone
Characteristic ratio hr2 i0 =nl2
Ð
Persistence length
VALUE
REFERENCE
428 310 323 300
(27) (27) (21) (28)
Cellulose diacetate, 298 K, light scattering Acetone THF
(22) 26.3 13.2
Ê A
Acetone Tri¯uoroethanol
55.6 59.7
(29)
Chain conformation
Ð
CTA I and II
21 helix
(25)
Glass transition temperature
K
Con¯icting data
243±473
(30)
Melting point
K
CTA I, annealed at 2508C for 15±30 min, DSC, 208C minÿ1 CTA II annealed at 2508C for 15±30 min, DSC, 208C minÿ1 DS 2:3±2.5
580
(25)
582
(25)
508±528
(24)
Heat capacity (of repeat unit)
kJ Kÿ1 molÿ1
Sheet Molding
0.36±0.60 0.36±0.51
(6)
De¯ection temperature
K
1.82 MPa 0.455 MPa
321±364 326±371
(6)
Tensile modulus
MPa
Sheet Molding, lightly cross-linked Mc 12,300 g molÿ1
2:1±4:1 103
0:45±2:8 103 2,300
(6) (6) (31)
Tensile strength
MPa
Molding, lightly cross-linked Mc 12,300 g molÿ1
14±248 10
(6) (31)
Maximum extensibility
%
Sheet Molding
20±50 60±70
(6)
Compressive strength
MPa
Molding, ASTM D695
14±248
(6)
Flexural yield strength
MPa
Sheet Molding
41±69 14±110
(6)
Impact strength
J mÿ1
Molding, 0.5 by 0.5 in notched bar, Izod test, ASTM D256
21±278
(6)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
53
Cellulose acetate PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Hardness
R scale
Rockwell Sheet Molding
85±120 34±125
(6)
Index of refraction n
Ð
Ð
1.47±1.48
(32)
Refractive index ml gÿ1 increment dn=dc
Resistivity of cellulose acetate ®ber
Permeability coef®cient P
ohm cmÿ1
DS
Solvent
Temp. (K)
dn=dc (0 nm)
0.49 0.49 0.49 1.75 2.45 2.45 2.46 2.46 3
DMA Formamide Water DMA THF Tri¯uoroethanol Acetone Acetone DMA
Ð Ð Ð 298 298 298 298 298 298
0.068 (436) 0.069 (436) 0.131 (436) 0.046 (436) 0.071 (436) 0.157 (436) 0.122 (436) 0.109 (546) 0.040 (436)
RH (%) 45 55 65 75 85 95
m3 (STP) m sÿ1 mÿ2 Paÿ1 (1017 )
Permeant
Temp. (K)
H2
293
He N2 O2 CO2
293 303 303 303
H2 O H2 O H2 S H2 S C2 H4 O CH3 Br
298 298 303 303 303 303
(33) (33) (33) (33) (33) (33) (20, 21) (20) (32)
Commercial
Puri®ed
967,000 424,000 150,000 28,900 1,610 11
81,500,500 6,040,000 448,000 33,200 2,460 39
(32)
2.63 22.1±9.5 10.2 0.21 0.585 17.3 63.4±73.7 4130 5500 2.63 4.58 30.0 4.2
(34) (35) (34) (34) (34) (34) (35) (34) (34) (34) (34) (34) (34)
Surface tension
mN mÿ1
Contact angle
45.9
(36)
Thermal conductivity
W mÿ1 Kÿ1
293 K
0.20
(37)
54
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose acetate PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Water absorption
%
25% RH 50% RH 75% RH 95% RH
0.6 2.0 3.8 7.8
(1)
Flammability
cm minÿ1
Ð
1.27±5.08
(35)
Supplier
Eastman Chemical Co., P.O. Box 431, Kingsport, Tennessee 37662, USA
Film with plasticizer.
REFERENCES
1. Bogan, R. T., C. M. Kuo, and R. J. Brewer. In Kirk-Othmer Encyclopedia of Chemical Technology, edited by J. I. Kroschwitz. John Wiley and Sons, New York, Vol. 5, 1979. 2. Noda, I., A. E. Dowrey, and C. Marcott. In Physical Properties of Polymers Handbook, edited by J. E. Mark. AIP Press, Woodbury, N.Y., 1996. 3. Zhbankov, R. G. In Infrared Spectra of Cellulose and Its Derivatives, edited by A. B. I. Stepanov. Consultants Bureau Publishing, New York, 1966. 4. Blackwell, J., and R. H. Marchessault. High Polym. 5 (1971): 1. 5. Doyle, S., and R. A. Pethrick. Polymer 27 (1986): 19; Miyamoto, T., et al. J. Polym. Sci., Polym. Chem. Ed., 22 (1984): 2,363. 6. Rudd, G. E., and R. N. Sampson. In Handbook of Plastics, Elastomers, and Composites, edited by C. A. Harper. McGraw-Hill, New York, 1992. 7. Fuchs, O. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/379. 8. Aharoni, S. M. Mol. Cryst. Liq. Crysl. Lett. 56 (1980): 237. 9. Gray, D. G. J. Appl. Polym. Sci., Appl. Polym. Symp., 37 (1983): 179. 10. Shvarts, A. G. Kolloidn. Zh. 18 (1956): 755. 11. Moore, W. R., J. A. Epstein, A. M. Brown, and B. M. Tidswell. J. Polym.Sci. 23(103) (1957): 23. 12. Golender, B. A., P. P. Larin, and S. A. Tashmukhamedov. Polym. Sci. USSR 18 (1976): 1,522. 13. Barton, A. F. M. CRC Handbook of Polymer-Liquid Interaction and Solubility Parameters. CRC Press, Boca Raton, Fla., 1990. 14. Orwoll, R. A., and P. A. Arnold. In Physical Properties of Polymers Handbook, edited by J. E. Mark. AIP Press, Woodbury, N.Y., 1996. 15. Gundert, F., and B. A. Wolf. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/173. 16. Moore, W. R., and B. M. Tidswell. J. Polym. Sci. 27 (1958): 459. 17. Moore, W. R., and R. Shuttleworth. J. Polym. Sci., Polym. Chem. Ed., 1 (1963): 733. 18. Moore, W. R., and B. M. Tidswell. J. Polym. Sci. 29 (1958): 37. 19. Lechner, M. D., and D. G. Steinmeier. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/61. 20. Suzuki, H., Y. Miyazaki, and K. Kamide. Euro. Polym. J. 16 (1980): 703. 21. Suzuki, H., Y. K. Muraoka, and M. Saitoh. Euro. Polym. J. 18 (1982): 831. 22. Kurata, M., and T. Tsunashima. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/46. 23. GroÈbe, A. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. V/117. 24. Spanovic, A. T., and A. Sarka. Polymer 19 (1978): 3. 25. Roche, E., H. Chanzy, M. Bouldenlle, and R. H. Marchessault. Macromolecules 11 (1978): 86. 26. Zugenmaier, P. J. Appl. Polym. Sci., Polym. Symp., 37 (1983): 223. 27. Suzuki, H., K. Kamide, and M. Saitoh. Euro. Polym. J. 18 (1982): 123. Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
55
Cellulose acetate 28. Elias, H.-G. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/205. 29. Gilbert, R. D., and P. A. Patton. Prog. Polym. Sci. 9 (1983): 115. 30. Peyser, P. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/258. 31. Yang, Y. Ph.D. Thesis, University of Cincinnati, 1993. 32. Seard, G. A., and J. R. Sanders. In Kirk-Othmer Encyclopedia of Chemical Technology, edited by J. I. Kroschwitz. John Wiley and Sons, New York, Vol. 5, 1979. 33. Huglin, M. B. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/466. 34. Pauly, S. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/451. 35. Seard, G. A. In Encyclopedia of Polymer Science and Engineering, edited by H. F. Mark, et al. Wiley-Interscience, New York, Vol. 3, 1985. 36. Wu, S. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/411. 37. Yang, Y. In Physical Properties of Polymers Handbook, edited by J. E. Mark. AIP Press, Woodbury, N.Y., 1996.
56
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose butyrate YONG YANG ACRONYM CLASS
CB
Carbohydrate polymers
STRUCTURE
CH2OR O
H O
H OR
H
H
OR
H
(R is COC3 H7 or H) Used as cellulose acetate butyrate in lacquers, coatings, hotmelt adhesives, and plastics.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
common diluents.
PROPERTY
Good tolerance for inexpensive lacquer solvents and
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
Degree of substitution
DS 3:0
372.41
Ð
Molecular weight of (repeat unit)
g mol
Preparation
Cellulose Butyric anhydride ÿÿÿÿÿÿ! Cellulose butyrate
(1)
Density
g cmÿ3
Ð
1.17
(1)
IR (characteristic absorption frequencies)
cmÿ1
Assignment (C3 H7 ) stretching (C3 H7 ) stretching (C3 H7 ) stretching (CO) stretching (C3 H7 ) stretching (C3 H7 ) deformation (C3 H7 ) deformation (C3 H7 ) deformation (C3 H7 ) deformation (C3 H7 ) deformation Structural factors Structural factors
2,960 2,940 2,870 1,750 1,460 1,420 1,380 1,370 1,310 1,250 1,170 1,080
Solubility parameter
(MPa)1=2
Ð
17±24
H2 SO4 = ÿH2 O
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(2)
(3)
57
Cellulose butyrate PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Theta temperature
K
Dodecane/tetralin (75 : 25 vol) Tetrachloroethane
395 329.7
(3) (4)
Solvents
Ð
For cellulose tributyrate
Benzene, chloroform, cyclohexanone, dodecane/ tetralin (3 : 1, >1308C), tetrachloroethane, xylene (hot)
(4, 5)
Nonsolvents
Ð
For cellulose tributyrate
Cyclohexane, diethyl ether, 2-ethylhexanol, hexane, methanol
(4, 5)
Mark-Houwink parameters : K and a
6 Solvent
Method
Temp. (K)
Mw 10ÿ4 (g molÿ1 )
K 103 (ml gÿ1 )
a
Butanone
Light scattering Osmometry Light scattering Light scattering Light scattering Light scattering Osmometry
303 303 273 298 323 343 403
6±32 8-22 6±32 6±32 6±32 6±32 11±21
4.3 18.2 5.3 5.6 6.1 6.2 82
0.87 0.80 0.87 0.85 0.82 0.80 0.50
Tributyrin
Dodecane/tetralin (75/25 by vol)
For cellulose tributyrate.
Unit cell dimension of cellulose tributyrate
6; 7 Lattice
Orthorhombic
Monomers per unit cell
Chains per unit cell
Cell dimension (AÊ) a
b
c
16
8
31.3
25.6
10.36
PROPERTY
UNITS
CONDITIONS
Degree of crystallinity of cellulose tributyrate
(%)
Annealing temp. (K)
Annealing hours
298 363 373 383 393 403 413
18 136 72 18 18 18 18
Chain conformation
Ð
58
Ð
VALUE
REFERENCE
(8) 36 40 39 41 43 43 45 21 helix
(9)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Cellulose butyrate PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
Ð
12.6 12.8
(9) (8)
Heat of fusion (of repeat unit)
kJ mol
Density (crystalline)
g cmÿ3
Ð
1.192
(9)
Glass transition temperature
K
DS 3:0 DS 3:0, 100% amorphous, DSC
388 354
(10) (8)
Melting point
K
Ð
206±207 354
(9) (8)
Heat capacity (of repeat unit)
kJ molÿ1
Ð
0.108
(8)
Tensile strength
MPa
Ð
30.4
(1)
Water absorption
Ð
Relative humidity (%) 25 50 75 95
0.1 0.2 0.7 1.0
Refractive index increment dn=dc
ml gÿ1
Solvent
DS Temp. (K)
dn=dc (0 nm)
Bromoform Dimethylformamide
3.0 3.0
294 314
Dioxane/water (93.5/6.5 vol) 3.0 Methyl ethyl ketone 3.0
336 294
ÿ0:11 (546) 0.0442 (436) 0.0478 (546) 0.104 (546) 0.078 (546)
(1)
(11)
REFERENCES
1. Bogan, R. T., C. M. Kuo, and R. J. Brewer. In Kirk-Othmer Encyclopedia of Chemical Technology, edited by J. I. Kroschwitz. John Wiley and Sons, New York, Vol 5, 1979. 2. Zhbankov, R. G. In Infrared Spectra of Cellulose and Its Derivatives, edited by A. B. I. Stepanov. Consultants Bureau Publishing, New York, 1966. 3. Barton, A. F. M. CRC handbook of Polymer-Liquid Interaction and Solubility Parameters. CRC Press, Boca Raton, Fla., 1990. 4. Elias, H.-G. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/205. 5. Fuchs, O. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/379. 6. Kurata, M., and Y. Tsunashima. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/31. 7. Zugenmaier, P. J. Appl. Polym. Sci., Polym. Symp., 37 1983: 223. 8. Piana, U., M. Pizzoli, and C. M. Buchanan. Polymer 36(2) 1995: 373. 9. Miller, R. L. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/88. 10. Peyser, P. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/258. 11. Huglin, M. B. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/409. Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
59
Cellulose nitrate YONG YANG ACRONYM CLASS
CN
Carbohydrate polymers
STRUCTURE
CH2OR O
H H O
OR
H
H
OR
H
(R is NO2 or H) Protective and decorative lacquer coatings, rotogravure and ¯exographic inks, leather ®nishes, fabric and household adhesives, explosives, propellants, plastics.
MAJOR APPLICATIONS
Soluble in a wide variety of organic solvents, fast solvent release under ambient drying conditions, durability, toughness.
PROPERTIES OF SPECIAL INTEREST
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight (of repeat unit)
g molÿ1
Degree of substitution
DS 3:0
297.13
Ð
Preparation
Cellulose HNO3 ! Cellulose nitrate ÿ1
(1)
Assignment (OH) stretching (CH2 ) stretching (CH2 ) stretching (ONO2 ) stretching (ONO2 ) stretching (ONO2 ) stretching (CÿCÿO) stretching
3,450 2,970 2,940 1,650 1,280 840 1,070
Kÿ1
Ð
8±12 10ÿ5
(4)
Speci®c gravity
g cmÿ1
DS 2:20±2.32
1.58±1.65
(1)
Solubility parameters
(MPa)1=2
DS 2:21
21.7 30.39 23.5 21.93 21.44
(5) (5) (5) (5) (6)
IR (characteristic absorption frequencies)
cm
Thermal expansion coef®cient
DS 2:08 DS 2:21
60
(2, 3)
Cellulose nitrate Solvents and nonsolvents
1; 7; 8
DS
Solvent
1.00
Water
1.83±2.32
Acetone , acetic acid (glacial), lower alcohols, alcohol/diethyl ether, amyl acetate, n-butyl acetate , butyl lactate,
-butyrolactin , cyclopentanone , diethyl acetate , diethyl ketone , N,N-dimethylacetamide , dimethyl carbonate , dimethyl cyanamide , dimethylformamide , dimethyl maleate , dimethylsulfoxide , 2-ethoxyethyl acetate, ethyl acetate , ethyl amyl ketone, ethylene glycol ethers, ethyl lactate, 2-hexanone , methyl acetate , methyl ethyl ketone , methyl propyl ketone , n-methylpyrrolidone-2 , 2octanone , 1-pentanone , n-pentyl acetate , pyridine
Higher alcohols, higher carboxylic acids, higher ketones, tricresyl phosphate
2.48
Acetone , cyclohexanone, ethanol/diethyl ether, ethyl butyrate, ethylene carbonate, ethylene glycol ether acetates, ethyl lactate, halogenated hydrocarbons, methyl acetate , methyl amyl ketone , furan derivatives, nitrobenzene
Alcohols, aliphatic hydrocarbons, aromatic hydrocarbons, carboxylic acids, dil, ethylene glycol, diethyl ether, water
Nonsolvent
Forms liquid crystalline mesophase.
Polymer±liquid interaction parameters (2 ) at various volume fractions of polymer 2
6; 9; 10 Solvent
DS
Temp. (K)
(0)
(0.2)
(0.4)
(0.6)
(0.8)
(1.0)
Acetone
2.4
298 303 293 293 298 298 298 293 293 293 298 293 293 293 298 298 293 293 298 303 293 293
0.27 0.24 Ð Ð 0.02 0.21 0.015 Ð ÿ0.89 Ð 0.02 Ð Ð Ð 0.02 0.15 Ð Ð 0.30 0.17 Ð Ð
Ð 0.05 0.14 Ð Ð Ð Ð 0.42 ÿ1.8 Ð Ð 0.04 ÿ0.08 Ð Ð Ð ÿ0.89 0.62 Ð ÿ0.06 0.016 ÿ0.5
Ð Ð 0.06 0.59 Ð Ð Ð 0.07 ÿ1.7 1.2 Ð ÿ0.43 ÿ0.14 Ð Ð Ð ÿ1.8 ÿ0.08 Ð Ð ÿ.5 ÿ0.52
Ð Ð ÿ0.37 0.42 Ð Ð Ð ÿ0.71 Ð ÿ0.25 Ð ÿ1.35 ÿ0.42 1.20 Ð Ð ÿ3.3 ÿ1.7 Ð Ð ÿ2.8 ÿ1.6
Ð Ð ÿ1.24 0.12 Ð Ð Ð ÿ2.4 Ð ÿ1.7 Ð Ð ÿ3.2 Ð Ð Ð Ð Ð Ð Ð ÿ3.7 Ð
Ð Ð Ð ÿ0.1 Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð Ð
Ethyl formate Ethyl n-propyl ether 2-Heptanone 2-Hexanone Isopentyl acetate Isoproyl ketone Methyl acetate
2.6 2.6 2.4 2.4 2.4 2.6 2.6 2.4 2.4 2.6 2.6 2.6 2.4 2.4 2.6 2.6 2.4
Methyl t-butyl ketone Methyl isopropyl ketone
2.6 2.6
Acetonitrile Amyl acetate 2-Butanone Butyl acetate Cyclopentanone 2,4-Dimethyl-3-pentanone 1,4-Dioxane Ethyl acetate
61
Cellulose nitrate Solvent
DS
Temp. (K)
(0)
(0.2)
(0.4)
(0.6)
(0.8)
(1.0)
Nitromethane 2-Octanone Propyl acetate
2.6 2.4 2.4 2.6
293 298 298 293
Ð 0.16 0.13 Ð
0.66 Ð Ð ÿ0.38
0.64 Ð Ð ÿ0.83
0.60 Ð Ð ÿ2.0
0.45 Ð Ð ÿ4.1
Ð Ð Ð Ð
Second virial coef®cients A2 Conditions
Solvent
Temp. (K)
Mw 10ÿ3 (g molÿ1 )
Method
A2 104 (mol cm3 gÿ2 )
Reference
DS 2:91 DS 2:55 DS 2:78
Acetone Acetone Acetone Ð Ð
298 298 RT 298 Ð
81±3,850 141±1,700 61.6±2,482 77±2,640 780
Light scattering Light scattering Osmometry Light scattering Light scattering
10.8±8.2 13.3±12.5 0.24 6.10 11.2
(11) (11) (11) (11) (11)
Acetone Ethyl acetate Acetone Butyl acetate Ð Ethyl acetate Ð Butanone
288 Ð 293 293 298 303 Ð 298
22.8±417 1,000 31±661 150±400 30±360 71.5 295±450 130
Osmometry Light scattering Osmometry Light scattering Osmometry Osmometry Osmometry Osmometry
0.24 6.2±7.0 0.28 1.0ÿ0.5 3.5ÿ0.3 44.1 28.5±25.7 10.8
(11) (12) (11) (11) (11) (11) (11) (11)
From raw cotton DS 2:82 DS = 2.87 From cotton From viscose rayon From chemical cotton DS 2:39
Mark-Houwink parameters: K and a
13 Polymer
Solvent
Temp. (K)
Mw 10ÿ4 (g molÿ1 )
K 103 (ml gÿ1 )
a
Method
Cellulose Trinitrate
Acetone
293 298 298 298 298 298 298 298 298 298 298 298 298 298 298 303 298 298
250 265 250 32 200 400 50 100 26 50 26 22 100 26 250 57 50 26
2.80 1.69 1.66 10.8 5.70 6.93 7.00 11.0 23.5 5.68 23 2.24 3.8 8.3 1.66 2.50 3.64 30
1.00 1.00 0.86 0.89 0.90 0.91 0.933 0.91 0.78 0.969 0.81 0.810 1.03 0.90 0.86 1.01 1.0 0.79
Sedimentation Light scattering Light scattering Light scattering Light scattering Light scattering Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Light scattering Light scattering Osmometry Osmometry
DS 2:55
DS 2:91
Butyl acetate Butyl formate Cyclohexanone Ethyl acetate
Ethyl butyrate Ethyl formate
62
Cellulose nitrate Polymer
Solvent
Temp. (K)
Mw 10ÿ4 (g molÿ1 )
K 103 (ml gÿ1 )
a
Method
Ethyl lactate 2-Heptanone Methyl acetate Nitrobenzene Pentyl acetate
298 298 298 298 298
65 26 22 22 26
12.2 5.0 18.3 6.1 1.1
0.92 0.93 0.835 0.945 1.04
Osmometry Osmometry Osmometry Osmometry Osmometry
Persistence length Conditions
Solvent
Temp. (K)
Persistence length (nm)
Reference
DS 2:91 DS 2:55 DS 2:75 DS 2:26 Cellulose trinitrate
Acetone Acetone Ethyl acetate Acetone Acetone
Cellulose trinitrate
Acetone Ethyl acetate
298 298 303 293 298 295 293 Ð Ð
970 530 700 0.48 360 0:26 0:01 0.40±0.70 13.2 11.8
(13) (13) (13) (13) (13) (13) (13) (14) (14)
Unit cell dimension of cellulose trinitrate Lattice
Monomers per unit cell
Orthorhombic 10 Orthorhombic 10 Monoclinic (CTNII) 10
PROPERTY
Cell dimension (AÊ) a
b
c
12.25 9.0 12.3
25.4 14.6 8.55
9.0 25.4 25.4
Tm (K)
Heat of fusion (kJ molÿ1 )
Chain conformation
Reference
Ð Ð 918
697 700 Ð
3.8 6.3 Ð
51 52 Ð
(15, 16) (16) (17)
UNITS
CONDITIONS
VALUE
REFERENCE
Huggins constants: k and k
Ð
Ð
Ð
(11)
Glass transition temperature
K
Ð
326, 329
(18)
Heat capacity
kJ Kÿ1 molÿ1
Ð
0.37±0.50
(4)
De¯ection temperature
K
At 1,820 KPa
60±71
(4)
Tensile modulus
MPa
Ð
1,310±1,520
(4, 19)
Tensile strength
MPa
RS, 296 K, 50% RH
62±110 48.3±55.2
(1) (19)
Maximum extensibility
%
RS, 296 K, 50% RH
13±14 40±45
(1) (4)
0
00
63
Cellulose nitrate PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Compressive strength
MPa
ASTM D695
152±241
(4)
Flexural yield strength
MPa
Ð
62±75.9
(4)
Impact strength
J mÿ1
0.5 by 0.5 in notched bar , Izod test, ASTM D256
267±374
(4)
Hardness
Ð
RS, Sward, % on glass Rockwell, R scale
90 95±115
(1) (4)
Ð
1.51
(1)
Index of refraction n Ð Refractive index increment dn=dc
ml gÿ1
Solvent
DS
Temp. (K) dn=dc (0 nm)
Acetone
1.96 2.23 2.26±2.35 2.43 2.55 3.0
298 Ð 293 298 Ð 298
Ethyl acetate
2.05 2.77 Ð 2.87 3.0 Ð Ð
293 298 293 Ð 303 298 293
(12, 20)
0.1022 (436), 0.0998 (546) 0.1010 (436), 0.0985 (546) 0.107 (436), 0.0950 (546) 0.0968 (436) 0.1151 (436) 0.0930 (436), 0.0903 (546), 0.098 (1086) 0.103 (546) 0.102 (436) 0.107 (436) 0.105 (436, 546) 0.102 (436) 0.107 (436) 0.105 (436), 0.103±0.105 (546)
Dielectric constant "00
Ð
293±298 K 60 Hz 1,000 Hz 1 106 Hz
7±7.5 7 6
Power factor
%
293±298 K 60 Hz 1,000 Hz
3±5 3±6
Surface tension
mNmÿ1
Ð
38
(21)
Thermal conductivity
W mÿ1 Kÿ1 Ð
0.23
(22)
Water absorption
%
1.0
(1)
64
294 K, 24 h, 80% RH
(1)
(1)
Cellulose nitrate PROPERTY
UNITS
CONDITIONS
VALUE
Compatible polymers
Cellulose acetate, ethyl cellulose, ethylhydroxyethylcellulose, poly(carprolacton), poly(vinyl acetate)
(19, 23)
Permeability coef®cient P
m3 (STP) m sÿ1 mÿ2 Paÿ1 (1017 )
(24)
Permeant
Temp. (K)
H2 He N2 O2 Ar CO2 NH3 H2 O SO2 C2 H6 CH3 H8
293 298 298 298 298 298 298 298 298 298 298
1.5 5.18 0.087 1.46 0.0825 1.59 42.8 4,720 1.32 0.0473 0.0063
In 30% isopropanol
3.7±5.5
REFERENCE
Cost
US$ kgÿ1
Supplier
Hercules Inc., 1313 North Market Street, Wilmington, DE 19894, USA
Ð
REFERENCES
1. Nitrocellulose: Chemical and Physical Properties. Hercules, Inc., Wilmington, Del., 1996. 2. Zhbankov, R. G. In Infrared Spectra of Cellulose and Its Derivatives, edited by A. B. I. Stepanov. Consultants Bureau Publishing, New York, 1966. 3. Julian, J. M., et al. In An Infrared Spectroscopy for the Coatings Industry, 4th ed., edited by D. R. Brezinski. Federation of Societies for Coatings Technology, Blue Bell, Penn., 1991. 4. Rudd, G. E., and R. N. Sampson. In Handbook of Plastics, Elastomers, and Composites, edited by C. A. Harper. McGraw-Hill, New York, 1992. 5. Grulke, E. A. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/555. 6. Du, Y., Y. Xue, and H. L. Frish. In Physical Properties of Polymer Handbook, edited by J. E. Mark. AIP Press, Woodbury, N.Y., 1996. 7. Fuchs, O. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/400. 8. Gray, D. G. J. Appl. Polym. Sci., Appl. Polym. Symp., 37 (1983): 179. 9. Gundert, F., and B. A. Wolf. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/173. 10. Orwoll, R. A. Rubber Chem. Technol. 50 (1977): 451. 11. Lechner, M. D., and D. G. Steinmeier. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/134. 12. Holt, C., W. Mackie, and D. B. Sellen. Polymer 17 (1976): 1,027. 13. Kurata, M., and Y. Tsunashima. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/46. 14. Gilbert, R. D., and P. A. Patton. Prog. Polym. Sci. 9 (1983): 115. 15. Miller, R. L. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/1. 16. Meader, D., E. D. T. Atkins, and Happey. Polymer 19 (1978): 1,371. 17. Marchessault, R. H., and P. R. Sundarajan. The Polysaccharides. Academic Press, Orlando, 1983. 65
Cellulose nitrate 18. Peyser, P. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VT/209. 19. Bogan, R. T., C. M. Kuo, and R. J. Brewer. In Kirk-Othmer Encyclopedia of Chemical Technology, edited by J. I. Kroschwitz. John Wiley and Sons, New York, Vol. 5, 1979. 20. Huglin, M. B. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/409. 21. Wu, S. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/411. 22. Yang, Y. In Physical Properties of Polymer Handbook, edited by J. E. Mark. AIP Press, Woodbury, N.Y., 1996. 23. Krause, S. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/352. 24. Pauly, S. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/451.
66
Chitin RACHEL MANSENCAL CLASS
Carbohydrate polymers; polysaccharides
STRUCTURE
CH2OH
O
O
H3COCNH
HO
O
HO O
H3CCOHN
CH2OH
O
O
HO H3CCOHN
CH2OH
Chitin is a biopolymer found in crustaceans shells (crab, shrimp, prawn, lobster) in some mollusks (krill, oyster, clam shells, squid skeleton). It is also found in fungi (mushrooms, yeast) and in various insects (cockroaches, silkworms, spiders, beetles).
1ÿ2
NATURAL RESOURCES
BIOSYNTHESIS
1ÿ2
Enzymes Glucose ATP ADP
Glucose Kinase
Glucose 6-phosphate Glu-6-P-isomerase Fructose 6-phosphate Glutamine Glutmate
Glutamine fructose-6-phosphate amino transferase
Glucosamine 6-phosphate Acetyl-Co-A CoASH ADP N-Acetyglucosamine 6-phosphate
Glucosamine phosphate acetyl transferase
ATP N-Acetylglucosamine
Acetylglucosamine phosphosmutase N-Acetylglucosamine 1-phospahte UTP UDP-N-acetylglucosamine UDP pyrophosphorylase Uridine diphosphate N-acetylgucosamine (–4-GlcNAc-β-1, 4-GlcNAc-β-1-) Chitin synthase Chitin EXTRACTION
the shells.
1
Chitin is produced by removing calcium carbonate and proteins from
Biomedical (wound and burn healing, treatment of fungal infections, antitumor agent, hemostatic agent, etc.); cosmetics (additives); biotechnology (enzyme and cell immobilization); industry (paper industry, food industry, etc.); agriculture and environmental protection.
1ÿ3
MAJOR APPLICATIONS
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
67
Chitin Natural resources; basic polysaccharides; nontoxic; biodegradability; bioactivity; biosynthesis; interesting derivatives (chitosan); toughness; graft copolymerization; chelating ability for transition metal cations; immobilizes enzymes by chemical linking or adsorption; chiral polymer.
1ÿ4
PROPERTIES OF SPECIAL INTEREST
PROPERTY
UNITS
CONDITIONS
VALUE
Infrared absorption (wavelength)
cmÿ1
-chitin
3,450; 3,265; 3,102; 2,950; 2,922; (5, 6) 2,887; 1,654; 1,548; 1,414; 1,377; 1,310; 1,261; 1,205; 1,115; 1,072; 1,026; 953; 893 3,295; 1,430; 972; 638
-chitin 13
C NMR (chemical shift) ppm
CO C1 C4 C5 C3 C6 C2 CH3
REFERENCE
173.7 103.7 83.7 75.6 73.2 60.6 55.2 22.6
(7±9)
X-ray diffraction peaks
Degrees
Ð
88580 ±108260 198580 ±208000
(10)
Molecular weight
g molÿ1
Native chitin Commercial chitin
>106
1±5 105
(1±4)
Moisture
%
Ð
2±10
Ð
Nitrogen content
%
Ð
6±7
Ð
Deacetylation
%
Ð
10±15
Ð
Dissociation constant Ka
Ð
Ð
6.0±7.0
Ð
Ash
%
9008C
<1.0
Ð
Transition metals
mg gÿ1
Ð
<5.0
(1±4)
Solubility
Ð
Nonsoluble in classical Ð solvent Soluble in N-N dimethyl- Up to 5% acetamide and 5% LiCl
(4)
Amino-acid catalyst
(4)
Ð Protein content
68
%
<0.5
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Chitin PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Biodegradability (effective microorganisms)
Chitinoclastic bacteria Chitinase associated with chitobiases, -N, acetylhexosaminidases, and lysozymes
Normal pH 4:0±7.0
Very slow Most active
(2)
Toxicity
g kgÿ1 body weight
LD 50
16
(1)
Unit cell dimensions
10ÿ13 Isomer
-chitin -chitin
Monomers per unit cell
Lattice
2 (antiparallel arrangement Orthorhombic of the chains) 2 (parallel arrangement of the Monoclinic chains)
Space group
Cell dimensions (AÊ)
Cell angle (8)
a
b
c (®ber axis)
P21 21 21
4.74
1.88
1.032
90
P22
4.85
9.26
10.38
97.5
REFERENCES
1. Mark, H. F., et al. Encyclopedia of Polymer Science and Engineering, 2d ed. John Wiley and Sons, New York, 1989, vol. 3. 2. Salamone, J. C., ed. Polymeric Materials Encyclopedia. CRC Press, Boca Raton, Fla., 1996, vol. 2. 3. Zikakis, John, ed. Chitin, Chitosan and Related Enzymes. Academic Press, Orlando, 1984. 4. Muzzarelli, R. A. A. Natural Chelating Polymers. Pergamon Press, Oxford, 1973. 5. Gow, N. A. R., et al. Carbohydr. Res. 165 (1987): 105. 6. Huong, D. M., N. X. Dung, and D. V. Luyen. Journal of Chemistry 27(3) (1989): 20. 7. Saito, H., R. Tabeta, and S. Hirano. Chem. Lett. (1981): 1,479. 8. Saito, H., R. Tabeta, and R. Ogawa. Macromolecules 20 (1987): 2,424. 9. Hirai, A., H. Odani, and A. Nakajima. Polym. Bull. 26(1) (1991): 87. 10. Persson, J. E., A. Domard, and H. Chanzy. Int. J. Biol. Macromol. 14(2) (1992): 221. 11. Minke, R., and J. Blackwell. J. Mol. Biol. 120 (1978): 167. 12. Gardner, K. H., and J. Blackwell. Biopolymers 14(8) (1975): 1,581. 13. Muzzarelli, R. A. A. In The Polysaccharides, edited by G. O. Aspinall. Academic Press, New York, 1982, vol. 3.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
69
Collagen CHANDIMA KUMUDINIE AND JAGATH K. PREMACHANDRA CLASS
Polypeptides and proteins
The most common type of collagen, Collagen I, is composed of two kinds of polypeptide helices, 1 and 2, in a 2:1 ratio respectively, to form a triple helix. The 1 and 2 chains of tropocollagen have a regularly repeating sequence of amino acid residues in which glycine is found at every third residue. This sequence can be written (GLY-X-Y)n , where X and Y are often proline and hydroxyproline respectively.
1 STRUCTURE
An extracellular protein, which is responsible for the strength and ¯exibility of connective tissue. Accounts for 25±30% of the protein in an animal.
2 Major component in all mammalian tissues including skin, bone cartilage, tendons, and ligaments.
3 FUNCTIONS
Biomaterial applications such as dermal implant, carrier of drugs, cell culture matrix, wound dressing, material for hybrid organ, drug delivery system, soft contact lens, tissue implants, cardiovascular graft, arti®cial heart, etc. Synthetic sausage casings in food industry.
3; 4
MAJOR APPLICATIONS
Major types of collagen
1; 5
70
Molecular formula
Composition
Tissue distribution
12 2 Type I chains
Low hydroxylysine, low carbohydrate, broad ®brils
13 Type II chains
13 Type III chains
13 Type IV chains
12 2 Type V chains
High carbohydrate, high hydroxylysine, thin ®brils Low carbohydrate, high hydroxylysine, high hydroxyproline High hydroxylysine, high carbohydrate
Tendons, bone, skin, ligaments, cornea, internal organs (comprises 90% of body collagen) Cartilage, vitreous body of eye, intervertebral disc Blood vessels, skin, internal organs Basal laminae
High carbohydrate, high hydroxylysine
Many tissues in small amounts
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Collagen Biosynthesis of collagen
6
Step 1. Translation on ribosome # Step 2. Hydroxylation of Pro and Lys # Step 3. Release from ribosome and addition of sugars # Step 4. Formation of triple helix and folding of globular domains # Step 5. Secretion from cell # Step 6. Removal of N and C terminal domains # Step 7. Deamination of lysine residues to form aldehyde and formation of cross-links Selected amino acid analysis of collagens
7 Amino acid
3-Hydroxyproline 4-Hydroxyproline Aspartic acid Threonine Serine Glutamic acid Proline Glycine Alanine Cysteine Valine Methionine Isoleucine Leucine Tyrosine Phenylalamine Hydroxylysine Lysine Histidine Arginine Galactose Glucose
Collagen (I)
a
2
a
2
b
(II)
c
(III)
a
(IV)
d
1 96 41 16 37 71 133 336 115 0 20 7 7 20 1.9 12 5.4 30 2 49 Ð Ð
0 82 47 19 35 68 120 337 105 0 33 5 15 30 4.6 12 7.6 22 10 51 Ð Ð
1 86 49 19 37 73 107 324 102 0 37 4.6 17 34 3.0 12 11.5 21 7.9 53 1.0 0.65
2 99 42 20 26 90 121 332 100 0 18 9 9 25 1 13 14 22 2 51 Ð Ð
0 125 42 13 39 71 107 350 96 2 14 8 13 22 3 8 5 30 6 46 Ð Ð
11 130 51 23 37 84 61 310 33 8.0 29 10 30 54 6 27 44.6 10 10 33 34.0 2.0
Values expressed as residues per 1,000 amino acids. Human skin.
b Human cornea.
c Human cartilage.
d Human glumerular basement membrane.
a
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
71
Collagen PROPERTY
Typical molecular weight range of polymer Mw
IR (characteristic absorption frequencies)
UNITS ÿ1
g mol
105
cmÿ1
CONDITIONS
VALUE
REFERENCE
Calf skin, solvents: citrate pH 3.7, phosphate pH 7.4, sedimentation equilibrium Calf skin, solvent: citrate pH 3.7, viscosity Dog®sh shark skin, solvent: formate pH 3.8, sedimentation equilibrium Chick cartilage and skin, sedimentation equilibrium Type I collagen, rat tail tendon, aggregates in 0.01 M HCl Type I collagen, single molecules
2.5±3.1
(8)
3.5 <3.5
(8) (8)
2.62±3.07
(9)
8.05
(10)
2.82
(10)
N±H stretch
3,330
(11)
CHAIN CONFORMATION
REFERENCE
Collagen I, the most common type of collagen, is composed of two kinds of polypeptide helices, 1 and 2, in a 2:1 ratio respectively, to form a triple helix. The 1 and 2 chains of tropocollagen have a regularly repeating sequence of amino acid residues in which glycine is found at every third residue. This sequence can be written (GLY-X-Y)n , where X and Y are often proline and hydroxyproline. Arranged in ®brils, composed of micro®brils, characteristic striation with a repeat distance of Ê. about 670 A Ê , 103 A Ê , and 102 A Ê respectively, Consists of macro®brils, ®brils, and sub®brils of diameters 104 A spun collagen ®ber after thermal treatment at 1708C, by scanning electron microscopy. Helical structure, when heated above 408C, the helices loosen and form thread-like chains and the collagen becomes gelatin. Triple helix, by optical rotatory dispersion. Ê , by light scattering. Rodlike with a length 2,800 A Ê and width 15 A Ê. Helical rod, length 3,000 A
(1)
(4) (11) (13)
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Linear thermal expansion coef®cient
Kÿ1
Whale ligament Rat tail tendons
0 3:24 10ÿ4
(14)
Density
g cmÿ3
At 258C, in 8 M LiBr-diethyleneglycol monobutyl ether Rat tail tendon from a 2-month-old rat Rat tail tendon from a 10-month-old rat Whale ligament Rat tail tendon cross-linked with 1,3-bis(vinylsulfonyl)-2-propanol (BVSP)
72
(2) (12) (3)
(14) 1.30 1.30 1.32 1.33
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Collagen PROPERTY
UNITS ÿ3
CONDITIONS
VALUE
REFERENCE
At 258C, in 8 M LiBr-diethyleneglycol nonomethyl ether, cross-linked with BVSP, rat tail tendon
1.34
(14)
Density
g cm
Solubility
Collagen in its mature form is insoluble under physiological conditions, can be denatured by heat, mild acid, or alkaline treatment
Second virial coef®cient
mol cm3 gÿ2
Solvent: 2 M KCNS at 258C
3:0 10ÿ4
(11)
Degree of crystallinity
%
X-ray diffraction from collagen ®bers
20±40
(11)
Denaturation temperature
K
Non-cross-linked, spun collagen ®bers Before thermal treatment 1008C for 30 min 1708C for 30 min 3 wt% glutaraldehyde cross-linked Before thermal treatment 1008C for 30 min 1708C for 30 min 7 wt% Cr-tanned Before thermal treatment 1008C for 30 min 1708C for 30 min Type I collagen Type II collagen Type III collagen In 0.1 M acetic acid by optical rotation Chick cartilage Chick skin Lamb anterior lens capsule by circular dichroism spectroscopy Pig kidney collagen Muscle layer collagen in Ascaris Intact collagen Bovine semimembranosus Bovine longissimus dorsi Bovine longissimus dorsi, after 1-week storage Bovine longissimus dorsi Rat skin Bovine tendon Cod skin Tropocollagen Calf skin Rat skin
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(2)
316 314 312 337 337 318 365 360 353 312.6 314.0 312.2 313.7 315.5 313 310 313 343.6 344.3 340.2 344.5 341.3 340.7 323.6 323.6 329.2
(12)
(12)
(12)
(15) (15) (15) (9) (16) (17) (17) (18)
(18)
73
Collagen PROPERTY
UNITS
CONDITIONS
Denaturation temperature
K
Type IV procollagen, optical rotatory dispersion, at neutral pH Heating rate 0.178C minÿ1 Heating rate 0.0278C minÿ1 At neutral pH, DSC In 10 mM acetic acid Soluble collagen, conc 0:86 mg mlÿ1 , in 0.15 M potassium acetate buffer, pH 4.7, solvent: Ethylene glycol (1 M) 2-Methoxyethanol (1 M) Control 2-Ethoxyethanol (1 M) 2-Butoxyethanol Type IV collagen, bovine anterior lens capsules
VALUE
REFERENCE
(19) 308±315, 321 307±314, 320 309.0, 315.1, 321.0 308.6, 311.9, 314.7, 323.0
312.3 312.0 311.9 311.1 308.3 327.4, 361.8
(20)
(21)
Transition enthalpy
kJ molÿ1 In 50 mM sodium citrate buffer, pH 3.9, in kJ molÿ1 in tripeptide units Type I collagen 17.0 Type II collagen 17.5 Type III collagen 16.5
(15)
Heat capacity
kJ Kÿ1 Native hydrated molÿ1 Native anhydrous
(22)
Tensile modulus
MPa
74
Gauge length 2.0 cm, strain rate 50% minÿ1 Uncross-linked, unstretched ®ber, wet diameter d 327 mm 10% stretched ®ber, uncross-linked, d 253 mm 30% stretched ®ber, uncross-linked, d 173 mm 50% stretched ®ber, uncross-linked, d 147 mm Unstretched ®ber, cross-linked, d 94 mm 10% stretched ®ber, cross-linked, d 95:6 mm 30% stretched ®ber, cross-linked, d 86:1 mm 50% stretched ®ber, cross-linked, d 80:3 mm Gauge length 1 cm, elongation rate 100 mm minÿ1 Collagen-poly(lactic acid) (PLA) composites, 50% collagen ®ber and 50% PLA matrix (w/w)
1:60 10ÿ3 1:22 10ÿ3
(23) 1:8 0:3 5:7 2:5 20:8 4:34 46:0 19:9 383 112 429 111 726 120 766 111 (24) 37
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Collagen PROPERTY
UNITS
Tensile modulus
MPa
Shear modulus
Tensile strength
MPa
MPa
CONDITIONS
VALUE
Collagen-collagen composites, 50% 18 collagen ®ber and 50% collagen matrix (w/w) Uncross-linked collagen matrix 10 At 258C, in 8 M LiBr-diethyleneglycol monobutyl ether, Rat tail tendon from a 2-month-old rat Rat tail tendon from a 10-month-old rat Whale ligament Rat tail tendon cross-linked with 1,3-bis(vinylsulfonyl)-2-propanol (BVSP) At 258C, in 8 M LiBr-diethyleneglycol nonomethyl ether, rat tail tendon cross-linked with BVSP Gauge length 2.0 cm, strain rate 50% minÿ1 Uncross-linked, unstretched ®ber, wet diameter d 327mm 10% stretched ®ber, uncross-linked, d 253 mm 30% stretched ®ber, uncross-linked, d 173 mm 50% stretched ®ber, uncross-linked, d 147 mm Unstretched ®ber, cross-linked, d 94 mm 10% stretched ®ber, cross-linked, d 95:6 mm 30% stretched ®ber, cross-linked, d 86:1 mm 50% stretched ®ber, cross-linked, d 80:3 mm Gauge length 1 cm, elongation rate 100 mm minÿ1 Collagen-poly(lactic acid) (PLA) composites, 50% collagen ®ber and 50% PLA matrix (w/w) Collagen-collagen composites, 50% collagen ®ber and 50% collagen matrix (w/w) Uncross-linked collagen matrix Gauge length 2 cm, strain rate 1 mm minÿ1 Uncross-linked ®ber 0.1 wt% glutaraldehyde (GA) cross-linked ®ber 1 wt% GA cross-linked ®ber 0.7 wt% Cr-tanned ®ber 7 wt% Cr-tanned ®ber
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
REFERENCE
(24) (24, 25) (14)
2:91 10ÿ3 0.129 0.172 0.622 0.602
0:91 0:21
(14) (23)
2:0 1:2 5:9 1:3 7:2 1:3 46:8 17:1 51:6 17:0 71:5 18:3 68:8 15:8
(24)
13 7
(24)
5
(24, 25) (12, 26)
350 300 320 425 400
75
Collagen PROPERTY
Ultimate elongation
UNITS
%
CONDITIONS
VALUE ÿ1
Gauge length 2.0 cm, strain rate 50% min Uncross-linked, unstretched ®ber, wet diameter d 327 mm 10% stretched ®ber, uncross-linked, d 253 mm 30% stretched ®ber, uncross-linked, d 173 mm 50% stretched ®ber, uncross-linked, d 147 mm Unstretched ®ber, cross-linked, d 94 mm 10% stretched ®ber, cross-linked, d 95:6 mm 30% stretched ®ber, cross-linked, d 86:1 mm 50% stretched ®ber, cross-linked, d 80:3 mm Gauge length 1 cm, elongation rate 100 mm minÿ1 Collagen-poly(lactic acid) (PLA) composites, 50% collagen ®ber and 50% PLA matrix (w/w) Collagen-collagen composites, 50% collagen ®ber and 50% collagen matrix (w/w) Gauge length 2 cm, strain rate 1 mm minÿ1 Uncross-linked ®ber 0.1 wt% glutaraldehyde (GA) cross-linked ®ber 1 wt% GA cross-linked ®ber 0.7 wt% Cr-tanned ®ber 7 wt% Cr-tanned ®ber
Optical rotation Degrees At 589 mm Muscle layer collagen in Ascaris Pig kidney collagen Ascaris muscle layer, denatured Pig kidney, denatured
68:0 6:87
32:5 4:76 24:1 5:67 15:6 2:66 15:5 2:61 12:3 1:75 11:6 2:49 20
(24)
24 20 30
(12, 26)
24 22 18 (17) ÿ400 ÿ380 ÿ150 ÿ130 ÿ380 to ÿ420 (13)
S cmÿ1
Permeability
cm Sÿ1
Translational diffusion coef®cient
cm2 Sÿ1 Type I collagen rat tail tendon, aggregates in 0.01 M HCl 4:5 10ÿ8 Type I collagen, single molecules 7:8 10ÿ8
76
(23)
45:1 8:97
Electrical conductivity
From bovine corium, dissolved in 1 mM HCl, conc. 0.19% at 58C, temp. range 20±508C, heating rate 0.38C minÿ1 Pepsin-solubilized prepared collagen, conc. 0.20% in 1 mM HCl, temp. range 20±508C, heating rate 0.38C minÿ1
REFERENCE
1:5±2:25 10ÿ4
(27)
1:75±2:5 10ÿ4
(27)
Collagen/poly(vinyl alcohol) (PVA) cross-linked ®lms to NaCl at 378C At 0 wt% PVA content 5.5 At 50 wt% PVA content 15 At 80 wt% PVA content 17.5
(28)
(10)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Collagen PROPERTY
UNITS
Intrinsic viscosity
dl g
Average hydrophobicity
Ð
ÿ1
CONDITIONS
VALUE
REFERENCE
Ascaris muscle layer, in 0.5 M NaCl at 258C Pig kidney, in 0.15 M sodium acetate, pH 4.0, at 258C In chicken tendon -fraction in calf skin Spongin B in sponge Sturgeon swim bladder
16 12
(17)
880 880 760 770
(29)
increased with temperature then decreased stepwise at 408C, and then increase again.
REFERENCES
1. Rawn, J. D. Biochemistry. Neil Patterson Publishers, Burlington, N.C., 1989. 2. Scott, T., trans. Concise Encyclopedia of Biochemistry. Walter de Gruter and Co., Berlin, 1983, p. 101. 3. Itoh, H., and T. Miyata. In Polymeric Materials Encyclopedia, edited by J. C. Salamone. CRC Press, Boca Raton, Fla., 1996, vol. 2, pp. 1,287±1,290. 4. Piez, K. A. In Encyclopedia of Polymer Science and Engineering, 2d ed., edited by H. F. Mark, et al. John Wiley and Sons, New York, 1985, vol. 3, pp. 699-727. 5. Stryer, L. Biochemistry, 2d ed. W. H. Freeman and Co., San Fransisco, 1975. 6. Mathews, C. K., and K. E. Van Holde. Biochemistry, 2d ed.. Benjamin/Cummings Publishing, Menlo Park, Calif., 1996, pp. 178±180. 7. Fasman, G. D., ed. Handbook of Biochemistry and Molecular Biology, Proteins, 3d ed. CRC Press, Cleveland, 1976, vol. 3, pp. 520±521. 8. von Hippel, P. H. In Treatise on Collagen, edited by G. N. Ramachandran. Academic Press, London, 1967. 9. Igarashi, S., R. L. Trelstad, and A. J. Kang. Biochim. Biophys. Acta 295 (1973): 514. 10. Silver, F. H., and R. L. Trelstad. J. Biol. Chem. 255 (1980): 9,427. 11. Walton, A. G., and J. Blackwell. Biopolymers. Academic Press, New York, 1973. 12. Takaku, K., et al. J. Appl. Polym. Sci. 59 (1996): 887. 13. Hashemeyer, R. H., and A. E. V. Haschemyer. Proteins: A Guide to Study by Physical and Chemical Methods. John Wiley and Sons, New York, 1973, pp. 410±419. 14. Honda, I., and K. Arai. J. Appl. Polym. Sci. 62 (1996): 1,577. 15. Davis, J. M., and H. P. Bachinger. J. Biol. Chem. 268 (1993): 25,965. 16. Gelman, R. A., et al. Biochim. Biophys. Acta 427 (1976): 492. 17. Fujimoto, D. Biochim. Biophys. Acta 168 (1968): 537. 18. McClain, P. E., and E. R. Wiley. J. Biol. Chem. 247 (1972): 692. 19. Davis, J. M., B. A. Boswell, and H. P. Bachinger. J. Biol. Chem. 264 (1989): 8,956. 20. Hart, G. J., A. E. Russell, and D. R. Cooper. Biochem. J. 125 (1971): 599. 21. Bailey, A. J., et al. Biochem. J. 296 (1993): 489. 22. Fasman, G. D., ed. Handbook of Biochemistry and Molecular Biology, Proteins, 3d ed. CRC Press, Cleveland, 1976, vol. 1, pp. 109±110. 23. Pins, G. D., et al. J. Appl. Polym. Sci. 63 (1997): 1,429. 24. Dunn, M. G., et al. J. Appl. Polym. Sci. 63 (1997): 1,423. 25. Dunn, M. G., P. N. Avasarala, and J. P. Zawadski. J. Biomed. Mater. Res. 27 (1993): 1,545. 26. Takaku, K., T. Kuriyama, and I. Narisawa. J. Appl. Polym. Sci. 61 (1996): 2,437. 27. Matsushita, S., et al. J. Appl. Polym. Sci. 50 (1996): 1,969. 28. Giusti, P., L. Lazzeri, and M. G. Cascone. In Polymeric Materials Encyclopedia, edited by J. C. Salamone. CRC Press, Boca Raton, Fla., 1996, vol. 1, pp. 538±549. 29. Fasman, G. D., ed. Handbook of Biochemistry and Molecular Biology, Proteins, 3d ed. CRC Press, Cleveland, 1976, vol. 1, pp. 217.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
77
Elastic, plastic, and hydrogel-forming protein-based polymers CHI-HAO LUAN AND DAN W. URRY CLASS
Polypeptides and proteins
REPRESENTATIVE STRUCTURES
Elastomer Poly(G GP) Plastic Poly(AVGVP) Hydrogel Poly(GGAP)
Medical: soft tissue augmentation; cell attachment to elastic matrices; prevention of post-surgical adhesions; tissue reconstruction; coatings on catheters, leads, and tubings; drug delivery; biosensors. Nonmedical: controlled release of herbicides, pesticides, fertilizers, and growth factors; food product additives; material coating; transducers (sensors/actuators); molecular machines; biodegradable plastics; controllable super absorbents.
1
MAJOR APPLICATIONS
Water soluble below a critical temperature. Hydrophobic folding and assembly (inverse temperature transition). Biocompatible. Biodegradable (chemical clocks enabling proteolytic degradation). Relatively low cost when microbially produced. To perform free energy transduction involving the intensive variables of mechanical force, temperature, pressure, chemical potential, electrochemical potential, and light. Thermoplastics (regular and inverse).
2; 3
PROPERTIES OF SPECIAL INTEREST
Chemical synthesis using solution and solid phase methods. Microbial synthesis using gene construction and expression in the cells of animals and plants.
SYNTHESIS
Bioelastic Researchs Ltd., 2800 Milan Court, STE 386, Birmingham, Alabama 35211.
SUPPLIER
Table 1. Hydrophobicity scale for protein-based polymers and proteins based on the properties of the inverse temperature transition of elastic protein-based polymers, poly[ fV (GVGVP), fX (GXGVP)].
a Tt (8C) (in pbs)
2
Tb (8C) (in H2 O)
4; 5
H
4; 5 (kcal molÿ1 )
b 0:05
S
4; 5 (cal molÿ1 Kÿ1 )
b 0:05
Ð (W) (Y) (F) (HO ) (L) (I) Ð
ÿ130 ÿ90 ÿ55 ÿ30 ÿ10 5 10 15
Ð ÿ105 ÿ75 ÿ45 Ð 5 10 Ð
Ð 2.10 1.87 1.93 Ð 1.51 1.43 Ð
Ð 7.37 6.32 6.61 Ð 5.03 4.60 Ð
(M)
20
15
1.00
3.29
Residue X Three-letter abbreviation
One-letter symbol
c
Lys (dihydro NMeN) Trp Tyr Phe His (imidazole) Leu Ile Lys (6-OH tetrahydro NMeN)
c Met 78
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Elastic, plastic, and hydrogel-forming protein-based polymers Residue X Three-letter abbreviation
One-letter symbol
Val Glu(COOCH3 ) Glu(COOH) Cys His (imidazolium) Lys(NH2 ) Pro Asp(COOH) Ala HyP Thr Asn Ser Gly Arg Gln Tyr(-Oÿ ) Lys(NH 3) Lys(NMeN,oxidized)
c Asp(COOÿ ) Glu(COOÿ ) Ser(PO 4)
(V) (Em ) (EO ) (C) (H ) (KO ) (P) (DO ) (A) Ð (T) (N) (S) (G) (R) (Q) (Yÿ ) (K ) Ð (Dÿ ) (Eÿ ) Ð
Tt (8C) (in pbs)
2
Tb (8C) (in H2 O)
4; 5
H
4; 5 (kcal molÿ1 )
b 0:05
S
4; 5 (cal molÿ1 Kÿ1 )
b 0:05
24 25 30 30 30 35 ÿ8
d , 40
e 45 45 50 50 50 50 55 60 60 120 120 120 170 250 1,000
26 Ð 20 Ð Ð 40 40
e 40 50 Ð 60 50 60 55 Ð 70 140 Ð Ð Ð Ð Ð
1.20 Ð 0.96 Ð Ð 0.71 0.92 0.78 0.85 Ð 0.82 0.71 0.59 0.70 Ð 0.55 0.31 Ð Ð Ð Ð Ð
3.90 Ð 3.14 Ð Ð 2.26 2.98 2.57 2.64 Ð 2.60 2.29 1.86 2.25 Ð 1.76 0.94 Ð Ð Ð Ð Ð
a
Tt and Tb are the on-set temperature for the hydrophobic folding and assembly transition, that is, inverse temperature transition, in pbs (0.15 N NaCl, 0.01 M phosphate) as determined by light scattering and in water as determined by DSC, respectively. Both values are linearly extrapolated to fX 1 and rounded to a number divisible by 5. H and S are the values at fX 0:2 on the curve for a linear ®t of the DSC derived endothermic heats and entropies of the transitions for the polymers in water.
b Per mole of pentamer.
c NMeN is for N-methyl nicotinamide pendant on a lysyl side chain, that is, N-methyl-nicotinate attached by amide linkage to the "NH2 of Lys. N-methyl-1,6-dihydronicotinamide (dihydro NMeN) is the most hydrophobic reduced state, and the second reduced state is N-methyl-6-OH, 1,4,5,6-tetrahydronicotinamide (6-OH tetrahydro NMeN).
d The calculated Tt value for Pro comes from poly(GVGVP) when the experimental values of Val and Gly are used. This hydrophobicity value of ÿ88C is unique to the -spiral structure where there is hydrophobic contact between the Val1i
CH3 and the adjacent Pro2i CH2 and the interturn Pro3i 3 CH2 moieties.
e The experimental value determined from poly[ fV (GVGVP), fP (GVGPP)].
Table 2a. Hydrophobic-induced pK shifts on polytricosamers and polymers of random mixtures of composite pentamers.
6 Glu-containing polymer
pKa
Poly[0.8(GVGVP), 0.2(GEGVP)] Poly[GEGFP GVGVP GVGVP GVGVP GFGFP GFGFP] Poly[(GEGFP ), 3(GVGVP), 2(GFGFP)]² Poly[GEGVP GFGFP GFGVP GVGVP GFGFP GVGVP] Poly[GEGFP GVGVP GVGFP GFGFP GVGVP GVGFP] Poly[(GEGFP), 2(GVGVP), 2(GVGFP), (GFGFP)]²
4.3 7.7 4.7 7.8 8.1 5.2
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
79
Elastic, plastic, and hydrogel-forming protein-based polymers Asp-containing polymer
pKa
Poly[GDGFP GVGVP GVGFP GFGFP GVGVP GVGFP] Poly[(GDGFP), 2(GVGVP), 2(GVGFP), (GFGFP)]² Poly[GDGFP GVGVP GVGVP GVGVP GFGFP GFGFP] Poly[(GDGFP ), 3(GVGVP), 2(GFGFP)]² Poly[GDGVP GFGFP GFGVP GVGVP GFGFP GVGVP]
10.1 4.6 9.5 5.2 6.7
²
Experimental conditions: 40 mg mlÿ1 at 208C, M.W. of the polypeptides > 50 kDa. Random mixture of pentamers comprising associated polytricosapeptide.
Table 2b. Hydrophobic-induced pK shift for poly[ fV (GVGIP), fX (GXGIP)], where X E, D, and K, and fX varies from 0.06 to 1.0.
7; 8; 9 fE
0.06
0.15
0.31
0.37
0.42
0.49
0.70
0.77
0.90
1.00
pK pK²
6.08 6.61
5.70 5.92
4.90 5.03
4.70 4.80
4.55 4.48
4.50 4.40
4.40 4.35
4.35 4.40
4.35 4.55
4.35 4.70
fD
0.06
0.08
0.19
0.28
0.35
0.51
0.73
0.84
0.89
1.00
pK pK²
5.4 6.0
5.2 5.0
4.7 4.5
4.3 4.2
4.1 3.9
4.0 3.8
3.9 3.9
3.9 4.1
3.9 4.2
3.8 4.6
fK
0.06
0.09
0.14
0.22
0.41
0.59
0.76
0.88
0.91
1.00
8.60 8.18
8.90 8.65
9.13 8.85
9.38 9.11
9.59 9.43
9.68 9.55
9.70 9.60
9.65 9.62
9.60 9.58
9.40 9.20
pK pK²
In 0.15 N NaCl; ² In H2 O; M.W. of the polypeptides > 50 kDa; at 378C.
Table 2c. Stretch-induced pK shifts for cross-linked Glu-containing polymers. Polymer
pK
X20-poly[0.8(GVGVP), 0.2(GEGVP)]
10 X20-poly[0.82(GVGIP), 0.18(GEGIP)]
11
80
0.0 0.85 0.0 0.37 0.65 1.25 1.95 2.8
Force
pK
dynes cmÿ2
grams
0.0 Ð 0.0 3:6 105 5:4 105 6:4 105 7:3 105 8:0 105
0.0 1.0 0.0 1.0 1.5 1.75 2.0 2.2
3.99 4.84 6.2 6.57 6.85 7.45 8.15 9.0
X20 indicates 20 Mrad -irradiation cross-linked polymer matrix.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Elastic, plastic, and hydrogel-forming protein-based polymers Table 3a. Composition effect on inverse temperature transition in water.
3; 5 Polymer
Tb (8C)
Tm (8C)
Q (cal gÿ1 )
H (kcal molÿ1 )
S (cal molÿ1 Kÿ1 )
Poly(AVGIP) Poly(AVGVP) Poly(GVGIP) Poly(GVGVP) (GVGVP)251 Poly[(GVGVP), (GVGIP)] Poly[0.8(GVGVP), 0.2(GFGVP)] Poly[0.8(GVGVP), 0.2(GAGVP)] Poly(GVGVAP) (irreversible)
18.4 33.6 11.2 27.8 26.9 18.9 12.9 31.8 29.0
19.7 34.7 13.3 30.0 29.0 20.3 16.0 34.9 35.3
10.39 6.20 6.31 2.69 3.21 4.24 4.58 1.99 1.61
4.54 2.62 2.67 1.10 1.32 1.77 1.92 0.80 0.77
15.46 8.47 9.32 3.59 4.31 5.98 6.54 2.57 2.50
Examples with different repeat compositions of 2,000 polymer preparations. Tb , Tm , Q, H, and S are on-set temperature, maximum heat absorption temperature, heat, enthalpy, and entropy of the inverse temperature transition as determined by DSC, respectively. H and S are values per mole of repeating peptide. This is true for the DSC data reported in all tables in this article.
Table 3b. Effect of pH on inverse temperature transition of poly[0.82(GVGIP), 0.18(GEGIP)].
3 pH
Tb (8C)
Tm (8C)
Q (cal gÿ1 )
H (kcal molÿ1 )
S (cal molÿ1 Kÿ1 )
2.3 3.5 4.2 4.6 5.1
0.00 0.04 0.11 0.13 0.20
10.3 15.2 20.7 24.0 26.0
12.9 18.2 24.9 32.0 37.0
4.00 2.80 1.51 1.19 0.60
1.71 1.20 0.64 0.51 0.26
5.92 4.10 2.14 1.66 0.83
is the degree of ionization of the Glu side chain.
Table 3c. Solute effect on inverse temperature transition.
2; 5; 12 Polymer
Solute
Tt (8C [M]ÿ1 )
Q (cal gÿ1 [M]ÿ1 )
Linearity
Poly(GVGVP)
Na3 PO4
pH > 8
NH4 2 SO4 Na2 CO3
pH > 8 NaCl CaCl2 NaBr NaI, NaSCN Sodium dodecyl sulfate NaCl NaCl NaCl NaCl NaCl
ÿ140.0 ÿ69.0 ÿ28.0 ÿ13.9 ÿ6.6 ÿ3.5 3.5 600.0 ÿ13.4 ÿ15.6 ÿ12.6 ÿ15.9 ÿ14.7
Ð Ð Ð 1.25 Ð Ð Ð Ð 1.35 0.52 2.99 0.96 1.80
Yes Yes Yes Yes Yes Yes No Ð Yes Yes Yes Yes Yes
Poly(GGIP) Poly(GGVP) Poly(GVGLP) Poly(VPGVGVPGG) Poly(AVGVP)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
81
Elastic, plastic, and hydrogel-forming protein-based polymers Table 3d. Lowering transition temperature by charge neutralization.
5 Polymer
[NaCl]/[N]
Poly[0.8(GVGVP), 0.2(GEGVP)] 0.0 0.15 0.20 0.25 0.50 1.0 1.5 Poly[0.85(GVGVP), 0.15(GDGVP)] 0.0 0.15 0.25 0.50 0.75 1.0 1.5 Poly[0.76(GVGVP), 0.24(GKGVP)] 0.0 0.05 0.10 0.125 0.20 0.25 0.50 1.0 1.5
82
Tt (8C)
Tt (8C)
pH < 3
pH > 7
26.4 24.5 Ð Ð 19.9 13.6 Ð Tt =N ÿ12:8
>100 91.5 73.7 52.0 47.0 35.8 26.0 Tt =N ÿ21:0
pH < 3
pH > 7
28.3 24.5 Ð 21.5 Ð 15.5 Ð Tt =N ÿ12:3
>100 75.0 55.0 50.3 44.0 40.0 31.0 Tt =N ÿ19:0
pH < 12
pH > 6
30.4 Ð Ð Ð 28.0 Ð Ð 17.8 Ð Tt =N ÿ12:6
>100 70.0 58.4 53.0 43.5 35.2 32.0 23.3 16.0 Tt =N ÿ16:0
Value for NaCl > 0:25; at lower salt concentration the slope is much steeper.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Elastic, plastic, and hydrogel-forming protein-based polymers Table 3e. Enhanced charge neutralization effect by CaCl2 on lowering Tt .
5 Polymer
[CaCl2 ]/[N]
Poly[0.8(GVGVP), 0.2(GEGVP)] 0.0 0.0125 0.025 0.05 0.1 0.2 0.3 0.4 0.7
Tt (8C)
Tt (8C)
pH 2
pH 7
26.4 Ð Ð Ð 25.5 Ð 24.0 Ð 21.7 Tt =N ÿ6:8
> 100:0 78.6 70.0 55.4 51.5 47.4 45.1 43.5 39.6 Tt =N ÿ13:6
Value for CaCl2 > 0:1; at lower salt concentration the slope is much steeper.
Table 3f. Urea and guanidine salt effect on inverse temperature transition.
5 Polymer
Solute
Range [M]
hTt i (8C [M]ÿ1 )
hQi (cal gÿ1 [M]ÿ1 )
Linearity
Poly(GVGVP)
Guanidine2 :H2 SO4 (pH 7.6) Guanidine:HCl Urea Dimethyl urea Guanidine2 :H2 SO4 (pH 7.6) Guanidine:HCl Urea
[0, [0, [0, [0, [0, [0, [0,
ÿ11.4 10.3 5.3 12.2 ÿ8.9 6.8 4.0
1.06 ÿ1.01 ÿ0.57 ÿ2.28 0.76 ÿ1.52 ÿ0.95
Yes² Yes² Yes² Yes Yes Yes² Yes
Poly(GVGIP)
²
1] 2] 3] 1] 1] 3] 3]
hTt i average slope over the listed range. With small nonlinearity.
Table 3g. Cosolvent effect on inverse temperature transition of poly(GVGVP) in water.
5 Cosolvent
Volume (%)
Tb (8C)
Q (cal gÿ1 )
H (kcal molÿ1 )
S (cal molÿ1 Kÿ1 )
DMSO
35 30 20 10 20 10 20 10
16.7 21.1 29.5 30.0 31.8 29.0 41.1 31.6
0.38 0.51 0.91 1.73 0.99 2.10 0.44 1.42
0.15 0.21 0.37 0.71 0.40 0.86 0.18 0.58
0.53 0.70 1.21 2.30 1.30 2.79 0.56 1.87
26.7
2.90
1.20
3.90
Acetone Dioxane H2 O
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
83
Elastic, plastic, and hydrogel-forming protein-based polymers Table 3h. Cosolvent effect on inverse temperature transition of poly(AVGVP) in water.
5 Cosolvent
Volume (%)
Tb (8C)
Q (cal gÿ1 )
H (kcal molÿ1 )
S (cal molÿ1 Kÿ1 )
EtOH
15 10 5 20 10 30 20
27.2 30.9 32.8 23.2 29.6 31.2 32.7
4.51 5.37 6.65 3.89 5.54 1.54 3.31
1.91 2.27 2.81 1.65 2.35 0.65 1.40
6.31 7.42 9.14 5.52 7.70 2.13 4.55
33.1
7.20
3.05
9.89
Ethylene glycol Acetone H2 O
Table 3i. Cosolvent effect on inverse temperature transition of poly(GVGIP) in water.
5 Acetone (volume %)
Tb (8C)
Q (cal gÿ1 )
H (kcal molÿ1 )
S (cal molÿ1 Kÿ1 )
20 10 5 0
5.0 10.2 11.5 11.8
2.71 3.91 4.53 6.40
1.15 1.66 1.92 2.71
4.06 5.77 6.67 9.41
Table 3j. Solvent deuteration effect on inverse temperature transition.
13 Polymer
Solvent
Tb (8C)
Q (cal gÿ1 )
H (kcal molÿ1 )
Poly(GVGVP)
D2 O H2 O D2 O H2 O D2 O H2 O D2 O H2 O D2 O, 1.0 M urea H2 O, 1.0 M urea D2 O, 2.0 M urea H2 O, 2.0 M urea D2 O, 3.0 M urea H2 O, 3.0 M urea D2 O, 0.5 N NaCl H2 O, 0.5 N NaCl D2 O, 1.0 N NaCl H2 O, 1.0 N NaCl
27.2 28.8 13.7 15.5 9.0 10.6 31.7 34.2 36.5 38.5 40.8 43.0 45.8 48.5 24.5 26.1 17.6 19.1
3.25 2.62 6.70 6.02 6.76 6.17 7.17 6.46 6.07 5.27 5.09 4.37 3.94 3.55 7.50 6.93 9.24 8.79
1.33 1.07 2.83 2.55 2.86 2.61 3.04 2.73 2.57 2.23 2.16 1.85 1.67 1.51 3.17 2.93 3.91 3.72
Poly(GVGLP) Poly(GVGIP) Poly(AVGVP)
84
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Elastic, plastic, and hydrogel-forming protein-based polymers Table 3k. Alcohol effect on inverse temperature transition of poly(GVGVP) in water.
5 Tb (8C)
Q (J gÿ1 )
H (kJ gÿ1 )
S (J molÿ1 Kÿ1 )
30 20 10 5
13.6 23.5 27.8 28.2
1.21 3.47 7.07 9.87
0.50 1.42 2.89 4.06
1.67 4.73 9.46 13.18
22 20 15 10 5
18.3 20.5 26.4 28.8 29.1
1.76 2.01 4.44 7.28 10.04
0.71 0.84 1.80 2.97 4.10
2.47 2.76 5.98 9.71 13.35
20 15 10
18.4 26.0 28.1
3.01 4.56 7.70
1.21 1.84 3.14
4.14 6.19 10.33
20 15 10
11.9 19.8 25.5
3.51 7.03 9.50
1.42 2.89 3.89
4.94 9.71 12.80
20 15 10 5
14.0 21.2 26.6 28.7
3.14 6.15 8.95 11.46
1.30 2.51 3.68 4.69
4.39 8.45 12.01 15.23
30 20 10 5
14.9 22.2 26.1 27.0
2.09 4.56 7.70 10.08
0.84 1.84 3.14 4.14
2.93 6.19 10.33 13.51
30 20 10 5
9.4 20.1 24.2 26.4
6.53 7.28 9.04 10.50
2.68 2.97 3.68 4.31
9.25 10.00 12.22 14.06
27.5
12.34
5.06
16.44
Alcohol Mole %
Methanol 16.01 10.0 4.71 2.29 Ethanol 8.00 7.16 5.16 3.31 1.60 iso-Propanol 5.55 3.26 2.08 n-Propanol 5.69 4.08 2.61 tert-Butanol 4.56 3.26 2.08 1.0 Ethylene glycol 12.16 7.47 3.46 1.67 Glycerol 9.57 5.82 2.67 1.28 H2 O
Volume %
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
85
Elastic, plastic, and hydrogel-forming protein-based polymers Table 4. Physical properties of elastic and plastic protein-based polymers. Polymer
Elastic Polymer X20 -poly (GVGVP)
1 X20 -(GVGVP)251
1
X20 -poly (GVGIP)
1 X20 -poly[3(GVGVP), (GFGVP)]
1
X20 -poly (GGVP) X20 -poly(VPGFGVGAG)
14 Plastic Polymer X20 -poly (AVGVP)
3
Conditions
Value
Young's modulus Young's modulus Max. extensibility
L=L0 Entropic elasticity
fe =f Tensile strength Young's modulus Max. extensibility
L=L0 Entropic elasticity
fe =f Young's modulus Transition temperature Max. extensibility
L=L0 Entropic elasticity
fe =f Young's modulus Transition temperature Young's modulus Transition temperature
50% extension, 378C 50% extension, 378C Ð Ð 300% extension, 378C 90% extension, 378C Ð Ð 80% extension, 378C 40 mg mlÿ1 H2 O Ð Ð 20% extension, 648C 40 mg mlÿ1 H2 O 5% extension, 378C 40 mg mlÿ1 H2 O
1:0 106 1:6 106 >2.5 <0.1 3.1 kg cmÿ2 3:9 106 >2.6 <0.1 4:9 106 138C >2 <0.05 8:2 105 488C 6:8 107 88C
Young's modulus
7% extension, 378C
2:0 108
Density (mg mlÿ1 )
Hydrogel Polymer X20 -poly (GVGVP)
1 X20 -poly (GVGIP)
1 X20 -poly (AVGVP)
1 X20 -poly (GGXP), X A, V, I Poly[0.8(AVGVP), 0.2(AFGVP)] Poly (AVGIP)
86
Property
<258C 40 at 48C <258C 80 at 48C <308C 40 at 48C <508C 20 at 48C Forms gel at concentrations >20 mg mlÿ1 and > 188C Forms gel at concentrations >20 mg mlÿ1 and > 188C
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Elastic, plastic, and hydrogel-forming protein-based polymers Table 5. Reversible contraction-relaxation of cross-linked polymer matrices. Elastic polymer
Thermally driven X20 -poly(GVGVP)
15 (3 g load) pH driven X20 -poly[0.8(GVGVP), 0.2(GEGVP)]
2 (3 g load) Salt driven X20 -poly(GVGVP)
15 (at 208C, 3 g load) Organic solvent driven X20 -(VPGVG)251
5 (at 238C, no load) Pressure driven Redox driven
Variable
Length
408C 208C
4.4 cm 5.4 cm
pH 2 pH 7
4.2 mm 8.2 mm
1 N NaCl H2 O
5.15 cm 5.50 cm
H2 O 20 vol% EtOH As in table 6 As in table 6
23.5 mm 21.0 mm
Table 6. Examples of free energy transduction effected by elastin protein-based polymers. Transduction/Elastic polymer
Intensive variable
Property measured
Thermo-mechanical X20 -poly(GVGVP)
16 (at constant length) X20 -poly[0.9(GVGVP), 0.1(GEGVP)]
16 (in pbs at 378C, constant length.)
Temp. (8C) 36 5 37 3
Force (dynes cmÿ2 ) 1:0 106 4:0 105 2:3 106 4:0 105
Chemo-mechanical X20 -poly[0.80(GVGVP), 0.20(GEGVP)]
17 (in pbs at 378C, constant length.) X20 -poly(GVGVP)
18 (at 258C, constant length)
Chemical potential pH 2:1 pH 7:4 [0.15 N NaCl, 0.01 M phosphate] H2 O
Force (dynes cmÿ2 ) 5:1 105 < 1:0 104 2.1 g 0
Baro-mechanical Poly[0.79(GVGVP), 0.21(GVGFP)]
19; 20 (at 12.68C, 1 gram constant force)
Pressure (atm) 68 1
Length (mm) (16.2)
19 , (38.5 )
20 (15.2)
19 , (37.0)
20
Electro-mechanical X20 -poly[0.70(GVGVP), 0.30(GVGK{NMeN}P)]
20 20 X -poly[0.73(GVGVP), 0.27(GVGK{NMeN}P)]
21
Redox Reduced
Length (mm) (3.2 )
20 , (1.92 )
21 (4.0)
20 , (2.16)
21
Photo-mechanical Poly[0.8(GVGVP), 0.2(GVGE{AzB}P)]
22
Photon Dark 350 nm light
Oxidized
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Tt (8C) 32 42
87
Elastic, plastic, and hydrogel-forming protein-based polymers Table 6. Continued Transduction/Elastic polymer
Intensive variable
Property measured
Mechano-chemical X20 -poly[0.82(GVGIP), 0.18(GEGIP)]
11
Mechanical force 0 8:0 105 (dynes cmÿ2 )
pK of Glu(E) 6.2 9.0
Electro-chemical Poly(GDGFP GVGVP GVGVP GFGVP GVGVP GVGK{NMeN}P)
23
Redox Reduced Oxidized
pK of Asp(D) 11.0 8.5
KfNMeNg N-methyl nicotinamide derivatised Lys; EfAzBg azobenzene derivatized Glu.
Table 7. Physical properties of the synthetic poly(W4) from human elastin.
24 Polymer
Condition
Tb (8C)
Q (cal gÿ1 )
H (kcal molÿ1 )²
H (kcal molÿ1 )³
S (kcal molÿ1 Kÿ1 )³
Poly(W4)
pH 2:0 pH 4:3 pH 5:8
25.5 27.8 28.0
1.92 1.45 0.32
0.86 0.65 0.14
8.79 6.63 1.48
28.63 21.43 4.62
pK of the Glu 4:84 X20 -poly(W4)
Young's modulus 3:4 105 dynes cmÿ2 at 378C in pbs Entropic elasticity indicated by a fe =f value of < 0:1 from 35 to 508C
W4(6-56): GLVPGGPGFPGGVVGVPGAGVPGVGVPGAGIPVVPGAGIPGAAVPGVVSPE. Per mole of pentapeptide. ³ Per mole of W4. ²
REFERENCES 1.
2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 88
Urry, D. W., et al. In Handbook of Biomaterials and BioengineeringÐPart A: Materials. Marcel Dekker, New York, 1995, pp. 1,619±1,673. Urry, D. W. Angew. Chem. (German) 105 (1993): 859-883; Angew. Chem. Int. Ed. Engl. 32 (1993): 819±841. Urry, D. W., C.-H. Luan, C. M. Harris, and T. M. Parker. In Proteins and Modi®ed Proteins as Polymeric Materials, edited by K. McGrath and D. Kaplan. Birkhauser Press, Boston, 1997, pp. 133±177. Urry, D. W., et al. J. Am. Chem. Soc. 113 (1991): 4,346±4,348. Luan, C.-H., et al. Unpublished data, 1997. Urry, D. W., et al. In The Polymeric Materials Encyclopedia: Synthesis, Properties and Applications. CRC Press, Boca Raton, Fla., 1995. Urry, D. W., S. Q. Peng, and T. M. Parker. J. Am. Chem. Soc. 115 (1993): 7,509±7510. Urry, D. W., et al. Angew. Chem. (German) 105 (1993): 1,523±1,525; Angew. Chem. Int. Ed. Engl. 32 (1993): 1,440±1442. Urry, D. W., et al. Chemical Physics Letters 225 (1994): 97±103. Urry, D. W., et al. Biopolymers 30 (1990): 215±218. Urry, D. W., and S. Q. Peng. J. Am. Chem. Soc. (1995): 8,478±8,479. Luan, C.-H., T. M. Parker, K. U. Prasad, and D. W. Urry. Biopolymers 31 (1991): 465±475. Luan, C.-H., and D. W. Urry. J. Phys. Chem. 95 (1991): 7,896±7,900. Urry, D. W., et al. In Progress in Biomed. Polym., edited by C. G. Gebelein and R. L. Dunn. Plenum Publishing, New York, 1990, 171±178. Urry, D. W. Prog. Biophys. Molec. Biol. 57 (1992): 23±57. Peng, S. Q., D. C. Gowda, T. M. Parker, and D. W. Urry. Unpublished data, 1997. Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Elastic, plastic, and hydrogel-forming protein-based polymers 17. Urry, D. W., et al. Proc. Natl. Acad. Sci. USA 85 (1988): 3,407±3,411. 18. Urry, D. W., R. D. Harris, and K. U. Prasad. J. Am. Chem. Soc. 110 (1988): 3,303±3,305. 19. Urry, D. W., L. C. Hayes, T. M. Parker, and R. D. Harris. Chem. Phys. Letters 201 (1993): 336± 340. 20. Hayes, L. C., D. C. Gowda, T. M. Parker, and D. W. Urry. Unpublished data, 1997. 21. Urry, D. W., L. C. Hayes, and D. Channe Gowda. Biochem. Biophys. Res. Comm. 204 (1994): 230±237. 22. Strzegowski, L. A., et al. J. Am. Chem. Soc. 116 (1994): 813±814. 23. Urry, D. W., et al. Biochem. Biophys. Res. Commun. 210 (1995): 1,031±1,039. 24. Gowda, D. C., et al. Int. J. Pept. Protein Res. 46 (1995): 453±463.
The authors wish to acknowledge the support of the Of®ce of Naval Research under grant number N00014-89-J-1970.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
89
Epoxy resins MEE Y. SHELLEY TRADE NAMES
Araldite, DER, Epi-Cure, Epi-Res, Epikote, Epon, Epotuf, etc.
Thermoset polymers, after curing (the uncured base resins are thermoplastic)
CLASS
DGEBA (diglycidyl ether of bisphenol A), novolacs, peracid resins, hydantoin resins, etc.
MAJOR RESIN TYPES
Diluents, resinuous modi®ers (to affect ¯exibility, toughness, peel strength, adhesion, etc.), ®llers, colorants and dyes, other additives (e.g., rheological additives, ¯ame retardants).
OTHER INGREDIENTS IN EPOXY FORMULATION
Protective coatings (for appliance, automotive primers, pipes, etc.). Encapsulation of electrical and electronic devices. Adhesives. Bonding materials for dental uses. Replacement of welding and riveting in aircraft and automobiles. In composites for materials in space industry, printed circuitry, pressure vessels and pipes. Construction uses such as ¯ooring, paving, and airport runway repair.
MAJOR APPLICATIONS
Wide range of properties depending on the formulation and processing. Chemical and weathering resistance, toughness, durability. Excellent adhesion to a variety of surfaces. Good electrical and thermal insulation. Better mechanical properties than most other castable plastics. Discolor when exposed to UV. Some are skin sensitizers.
PROPERTIES OF SPECIAL INTEREST
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Speci®c gravity
Ð
Un®lled Bisphenol molding compounds (glass ®ber-reinforced/ mineral-®lled) Bisphenol molding compounds (low density glass sphere-®lled) Sheet molding compounds Novolac molding compounds Casting resins, silica-®lled Casting resins, aluminum-®lled Casting resins, ¯exibilized Casting resins, cycloaliphatic
1.2±1.3 1.6±2.1
(1) (2)
0.75±1.0
(2)
0.1 1.6±2.05 1.6±2.0 1.4±1.8 0.96±1.35 1.16±1.21
(2) (2) (2) (2) (2) (2)
1/8 in. thick specimen, 24 h Bisphenol molding compounds Sheet molding compounds Novolac molding compounds Casting resins, silica-®lled Casting resins, aluminum-®lled Casting resins, ¯exibilized Filament wound (80 wt% glass ®ber-reinforced)
0.04±1.0 1.4±1.6 0.04±0.29 0.04±0.1 0.1±4.0 0.27±0.5 0.50
(2) (2) (2) (2) (2) (2) (3, 4)
Water absorption
90
%
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Epoxy resins PROPERTY
Impact strength, Izod
UNITS
Jm
ÿ1
CONDITIONS
VALUE
REFERENCE
Un®lled Silica-®lled Aluminum-®lled Flexibilized Bisphenol molding compounds (glass ®ber-reinforced) Bisphenol molding compounds (mineral-®lled) Bisphenol molding compounds (low density glass sphere-®lled) Sheet molding compounds (glass ®ber-reinforced) Sheet molding compounds (carbon ®ber-reinforced) Novolac molding compounds Filament wound (80 wt% glass ®ber-reinforced)
10±50 16±24 21±85 120±270 16±530
(1) (2) (2) (2) (2)
16±27
(2)
8±13
(2)
1,600±2,100
(2)
800±1,100
(2)
16±27 2,400
(2) (3, 4)
Hardness
Shore Barcol Rockwell
Casting resins, ¯exibilized Novolac molding compounds Filament wound (80 wt% glass ®ber-reinforced)
D65±89 70±78 M98
(2) (2) (3, 4)
Fracture toughness
J cmÿ3 m1=2
Unspeci®ed
0.6
(1)
Tensile modulus
MPa
Un®lled Casting, un®lled Bisphenol molding compounds (glass ®ber-reinforced) Bisphenol molding compounds (mineral-®lled) Sheet molding compounds (glass ®ber-reinforced) Sheet molding compounds carbon ®ber-reinforced) Novolac molding compounds Filament wound (80 wt% glass ®ber-reinforced)
3,000±5,000 2,400 21,000
(1) (2) (2)
2,400
(2)
14,000±28,000
(2)
70,000
(2)
14,500±16,600 27,600
(2) (3, 4)
7±2,400 3,400 4,500
(2)
Compressive modulus
MPa
Casting, ¯exibilized Casting, cycloaliphatic Bisphenol molding compounds (mineral-®lled) Novolac molding compounds (mineral- and glass-®lled, high temperature)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
4,550
91
Epoxy resins PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Stress at break
MPa
Un®lled
30±90
(1)
Tensile strength at break
MPa
Casting resins, un®lled Casting resins, silica-®lled Casting resins, aluminum-®lled Casting resins, ¯exibilized Casting resins, cycloaliphatic Bisphenol molding compounds (glass ®ber-reinforced/mineral-®lled) Bisphenol molding compounds (low density glass sphere-®lled) Sheet molding compounds (glass ®ber-reinforced) Sheet molding compounds (carbon ®ber-reinforced) Novolac molding compounds Filament wound (80 wt% glass ®ber-reinforced)
28±90 48±90 48±83 14±70 55±83 28±140
(2) (2) (2) (2) (2) (2)
17±28
(2)
140±240
(2)
280±340
(2)
34±110 552
(2) (3, 4)
Un®lled Bisphenol molding compounds (®lled with glass ®ber) Sheet molding compounds Casting resins, un®lled Casing resins, aluminum-®lled Casing resins, silica-®lled Casing resins, ¯exibilized Casing resins, cycloaliphatic Filament wound (80 wt% glass ®ber-reinforced)
1±2 4
(1) (2)
0.5±2 3±6 0.5±3 1±3 20±85 2±10 1.6
(2) (2) (2) (2) (2) (2) (3, 4)
Elongation at break
%
Flexural strength
MPa
Bisphenol molding compounds Sheet molding compounds Novolac molding compounds Casting resins and compounds
34±200 340±660 70±150 55±170
(2)
Flexural modulus
MPa
Bisphenol molding compounds Sheet molding compounds Novolac molding compounds Filament wound (80 wt% glass ®ber-reinforced)
3,400±31,000 14,000±34,000 9,700±17,000 34,500
(2) (2) (2) (3, 4)
Compressive strength
MPa
Casting, un®lled Casting, silica or alumina-®lled Casting, ¯exibilized Casting, cycloaliphatic Bisphenol molding compounds (glass ®ber-reinforced/mineral-®lled)
100±170 100±240 7±97 100±140 120±280
(2) (2) (2) (2) (2)
92
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Epoxy resins PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Compressive strength
MPa
Bisphenol molding compounds (low density glass sphere-®lled) Sheet molding compounds (glass ®ber-reinforced) Sheet molding compounds (carbon ®ber-reinforced) Novolac molding compounds Filament wound (80 wt% glass ®ber-reinforced)
70±100
(2)
140±210
(2)
210±280
(2)
170±330 310
(2) (3, 4)
Surface tension Polymer
Temp. (K)
Value (mN mÿ1 )
Reference
DGEBA with 6 wt% N-N-diethylaminopropylamine, cured DGEBA with stoichiometric amount of triethylenetetramine, cured DGEBA, 2,3-(diglycidoxy-1,4-phenylene)propane, chain extended with bisphenol A
293 293
46.8 39.1
(5) (5)
296
51.2
(5, 6)
Interfacial tension
5 Polymer
Temp. (K)
Value (mN mÿ1 )
Poly(butadiene) vs. epoxy resin
296 328 293 328 328
1.77 1.40 1.23 0.57 0.58
Poly(butadiene-stat-acrylonitrile) 18 wt% AN vs. epoxy resin Poly(butadiene-stat-acrylonitrile) 26 wt% AN vs. epoxy resin
Epoxy resin: DGEBA, chain extended with bisphenol A.
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Volume resistivity
ohm cm
Filled with glass Filled with mineral
1016 1016
(7)
Dielectric strength
V milÿ1
Filled with glass Filled with mineral
360 400
(7)
At 1 MHz Filled with glass Filled with mineral
4.6 5.0
Dielectric constant
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(7)
93
Epoxy resins PROPERTY
UNITS
Thermal conductivity
Wm
De¯ection temperature
K
ÿ1
ÿ1
K
CONDITIONS
VALUE
REFERENCE
Casting grade, 293 K Casting grade, 300±500 K Foam, d 0:032±0.048 g cmÿ3 Foam, d 0:080±0.128 g cmÿ3 Filled with 50% aluminum Filled with 25% Al2 O3 Filled with 50% Al2 O3 Filled with 75% Al2 O3 Filled with 30% mica Filled with 50% mica Filled with silica Filament wound (80 wt% glass ®ber-reinforced)
0.19 0.19±0.34 0.016±0.022 0.035±0.040 1.7±3.4 0.35±0.52 0.52±0.69 1.4±1.7 0.24 0.39 0.42±0.84 1.77
(8, (9, (9, (9, (9, (9, (9, (9, (9, (9, (9, (3,
Under ¯exural load, 1.82 MPa Bisphenol molding compounds, glass ®ber-reinforced/mineral-®lled Bisphenol molding compounds, low density glass sphere-®lled Sheet molding compounds Novolac molding compounds Casting resins and compounds (un®lled) Casting resins and compounds (silica-®lled) Casting resins and compounds (aluminum-®lled) Casting resins and compounds (¯exibilized) Casting resins and compounds (cycloaliphatic)
380±530
9) 10) 11) 11) 12) 12) 12) 12) 8) 8) 8, 12) 4)
(2)
370±390 560 420±530 320±560 340±560 360±590 296±390 370±510
Radiation resistance, half-value dose in air Dose rate (Gy hÿ1 )
Conditions
Filled Filled Filled Filled Filled
94
with glass ®ber with graphite with mineral ¯our with mineral ¯our (85% quartz sand) with cotton
5
10 105 105 500 105
Value (MGy)
Reference
25±100 50 10±30 7 1
(13, (13, (13, (13, (13,
14) 14) 14) 15) 14)
De®ned as the absorbed dose that reduces a property (¯exural strength) to 50% of the initial value.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Epoxy resins PROPERTY
UNITS
Solubility parameters Hildebrand parameter Hansen parameters d p h t
(MPa)
Processing temperature
K
CONDITIONS
VALUE
REFERENCE
Ð Epikote 1001 (Shell)
22.3
(16, 17) (17, 18)
1=2
Bisphenol molding compounds Compression Transfer Sheet molding compounds Compression Transfer Novolac molding compounds Compression Injection Transfer
20.36 12.03 11.48 26.29 390±440 390±470
(2)
390±440 405±440 410±460 420±450 390±480
Molding pressure
MPa
Bisphenol molding compounds Sheet molding compounds Novolac molding compounds
0.7±34 3.4±14 1.7±21
(2)
Compression ratio
Ð
Bisphenol molding compounds Sheet molding compounds Novolac molding compounds
2.0±7.0 2.0 1.5±2.5
(2)
Mold shrinkage (linear)
Ð
Bisphenol molding compounds Sheet molding compounds Novolac molding compounds Casting resins
0.001±0.01 0.001 0.004±0.008 0.0005±0.01
(2)
REFERENCES
1. Brostow, W., J. KubaÂt, and M. M. KubaÂt. In Physical Properties of Polymers Handbook, edited by J. E. Mark. Wiley-Interscience, New York, 1996, pp. 313±334. 2. Kaplan, W. A., et al., eds. Modern Plastics Encyclopedia '97. McGraw-Hill, New York, Modern Plastics, Mid-November, 1996. 3. Rosato, D. In Encyclopedia of Polymer Science and Engineering, edited by H. F. Mark, et al. John Wiley and Sons, New York, 1988, vol. 14, pp. 350±391. 4. Fiberglas Plus Design: A Comparison of Materials and Processes for Fiber Glass Composites. OwensCorning Fiberglas Corp., July 1985. 5. Wu, S. In Polymer Handbook, edited by J. Brandrup and E. H. Immergut, 3d ed. WileyInterscience, New York, 1989, pp. VI 411±434. 6. Sohn, J. E., et al. Polym. Mater. Sci. Eng. 49 (1983): 449. 7. Harper, C. A., ed. Handbook of Plastics, Elastomer, and Composites, 3d ed. McGraw-Hill, New York, 1996. 8. Thompson, E. V. In Encyclopedia of Polymer Science and Engineering, edited by H. F. Mark, et al. John Wiley and Sons, New York, 1989, vol. 16, pp. 711±747.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
95
Epoxy resins 9. Yang, Y. In Physical Properties of Polymers Handbook, edited by J. E. Mark. Wiley-Interscience, New York, 1996, pp. 111±117. 10. Chern, B. C., et al. In Thermal Conductivity 14, Proceedings of the 14th International Thermal Conference, edited by P. G. Klemens and T. K. Chu. Plenum, New York, 1975. 11. Mark, H. F., et al., eds. Encyclopedia of Chemical Technology, 3d ed. Wiley-Interscience, New York, 1978. 12. Goodman, I., and H. Sidney, eds. Handbook of Thermoset Plastics. Noyes, Park Ridge, N.J., 1986. 13. WuÈndrich, K., In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. Wiley-Interscience, New York, 1989, pp. VI 463±474. 14. SchoÈnbacher, H., and A. Stolarz-Izycka. CERN 79-08 (1979). 15. Rauhut, K., S. RoÈsinger, and H. Wilski. Kunststoffe 70 (1980): 89. 16. Tobolsky, A. V. Properties and Structure of Polymers. John Wiley and Sons, New York, 1960, pp. 64±66. 17. Du, Y., Y. Xue, and H. L. Frisch. In Physical Properties of Polymers Handbook, edited by J. E. Mark. Wiley-Interscience, New York, 1996, pp. 227±239. 18. Hansen, C. M. Skand. Tidskr, FaÈrg Lack, 17 (1971): 69.
96
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylcellulose YONG YANG ACRONYM CLASS
EC
Carbohydrate polymers
STRUCTURE
CH2OR O
H O
H OR
H
H
OR
H
(R is CH2 CH3 or H) Lacquers for wood, plastic, and paper, varnishes, hot melts, adhesives, thickener in coatings and inks, tablet coatings and binding, encapsulation.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
organic solvents.
Low temperature ¯exibility, soluble in a variety of
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight (of repeat unit)
Ð
Degree of substitution
DS 3:0
246.30
Ð
Preparation
Cellulose NaOH ! Na-cellulose (alkali cellulose) Na-cellulose C2 H5 Cl ! Ethyl cellulose NaCl
(1)
IR (characteristic absorption frequencies)
cmÿ1
Assignment (C2 H5 ) stretching (C2 H5 ) stretching (C2 H5 ) stretching (C2 H5 ) stretching (C2 H5 ) deformation (C2 H5 ) deformation (C2 H5 ) deformation (C2 H5 ) deformation (C2 H5 ) deformation (C2 H5 ) deformation (CÿO) stretching
2,970 2,870 2,900 2,870 1,490 1,450 1,410 1,380 1,320 1,280 1,109
(2, 3)
Thermal expansion coef®cient
Kÿ1
Sheet
10±20 10ÿ5
(4)
Speci®c gravity
g cmÿ3
Ð
1.14
(1)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
97
Ethylcellulose PROPERTY
Solubility parameters
UNITS
(MPa)
CONDITIONS 1=2
Solvent
DS
Temp. (K)
Ð Poor H-bonding solvent
Acetone n-Amyl acetate Benzene n-Butyl acetate Ethyl acetate Methyl acetate Methyl n-amyl ketone Methyl ethyl ketone Methyl n-propyl ketone n-Propyl acetate Tetrachloromethane Toluene Trichloromethane
2.4±2.6 2.4±2.6 Ð 2.6±2.8 2.4±2.6 Ð 2.4±2.6 2.6±2.8 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Ð Ð Ð Ð Ð Ð Ð Ð 298 298 298 298 298 298 298 298 298 298 298 298 298
Solvent
DS
Temp. (K)
Acetone n-Amyl acetate Benzene n-Butyl acetate Ethyl acetate Methyl acetate Methyl n-amyl ketone Methyl ethyl ketone Methyl n-propyl ketone n-Propyl acetate Tetrachloromethane Toluene Trichloromethane Water
2.45 2.45 2.45 2.45 2.45 2.45 2.45 2.45 2.45 2.45 2.45 2.45 2.45 1.4
298 298 298 298 298 298 298 298 298 298 298 298 298 328
Moderate H-bonding solvent Strong H-bonding solvent
Polymer-liquid interaction parameter
98
Ð
VALUE
REFERENCE
21.1 (5) 20 (6) 16.6±22.7 (7) 17.4±19.4 (7) 21 (6) 15.1±22.2 (7) 19.4±29.7 (7) 19.4±23.3 (7) 19.4 (8) 18.7 (8) 20.6 (8) 18.7 (8) 19.1 (8) 19.3 (8) 18.8 (8) 19.1 (8) 19.0 (8) 18.8 (8) 20.6 (8) 20.4 (8) 18.6 (8) (8, 9) 0.46 0.28 0.48 0.24 0.40 0.41 0.38 0.42 0.37 0.33 0.46 0.47 0.34 1.1
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylcellulose Solvents and nonsolvents
1; 10; 11
DS
Solvent
Nonsolvent
0.5±0.7 1.0±1.5 2
Aqueous alkali Acetic acid, formic acid, pyridine, water (cold) Chloroform, chlorohydrins, dichloroethylene, ethanol, methylene chloride, tetrahydrofuran
2.3
Acetic esters, alcohols, alkyl halogenids, benzene, carbon disul®de, furan derivatives, ketones, nitromethane Acetic acid , acetone, amyl acetate, amyl alcohol, benzene, benzyl acetate, benzyl alcohol, butanol, butyl acetate, butyl lactate, carbon tetrachloride , chloroform , m-cresol , cyclohexanol, cyclohexanone, dichloroacetic acid , dichloromethane , 1,5-dimethyl-2-pyrrolidone , dioxane, ethanol, ethylene chloride, ethyl acetate, ethyl ether, ethyl formate, ethyl lactate, formic acid , hexone, methanol, methyl ethyl ketone, methylene dichloride, methyl formate, 1-nitropropane, 2-nitropropane, phenol , propanol, propyl acetate, toluene, trichloroethylene , tri¯uoroacetic acid , tri¯uoroethanol , xylene Alcohols, ester, benzene, methylene chloride
Water Ethanol Alcohols, carbon tetrachloroethylene, diethyl ether, esters, ketones, hydrocarbons, water Acetone (cold), ethylene glycol
2.4±2.6
3
Hexane, nitromethane, petroleum ether
Carbon tetrachloride, diols, hydrocarbons, n-propyl ether, tetrahydrofurfuryl alcohol
Forms liquid crystal mesophase.
Mark-Houwink parameters: K and a
12 Solvent
Temp. (K)
Mw 10ÿ4 (g molÿ1 )
Method
K 103 (ml gÿ1 )
a
Acetone Benzene
293 293 298 333 298 333 298 333 298 319 298 333 298 298 333
8 8 14 14 14 14 14 14 14 14 14 14 14 14 14
Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Osmometry Light scattering Osmometry Osmometry
1.51 1.34 29.2 35.8 18.2 26.7 14.0 18.1 11.8 9.3 10.7 14.0 52.3 4.2 22.6
1.05 1.07 0.81 0.78 0.84 0.79 0.87 0.83 0.89 0.90 0.89 0.85 0.65 0.96 0.79
Butanone Butyl acetate Chloroform Ethyl acetate Methanol Nitroethane
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
99
Ethylcellulose Unit cell dimension of triethylcellulose
13 Lattice
Orthorhombic
Monomers per unit cell
Chains per unit cell
Cell dimension (AÊ) a
b
c
12
6
15.64
27.09
15.0
Density (g cmÿ3 )
Chain conformation
1.158
32
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Martin coef®cient k0
Ð
Toluene/ethanol (80/20)
0.111
(14)
Glass transition temperature
K
Ð DS 2:45±2.60
316 393±397
(15) (1)
Heat capacity (of repeat unit)
kJ Kÿ1 molÿ1
Ð
0.31±0.77
(4)
De¯ection temperature
K
1.82 MPa
319±362
(4)
Tensile modulus
MPa
Ð
897±2,069
(4)
Tensile strength
MPa
Ð
14±55 47±72
(4) (1)
Maximum extensibility
%
Ð Conditioned at 298 K, 50% RH
15±100 7±30
(4) (1)
Compressive strength
MPa
ASTM D695
69±241
(4)
Flexural yield strength
MPa
Ð
28±83
(4)
Flexural strength
MPa
Ð
62±69
(16)
Impact strength
J mÿ1
0:5 0:5 in notched bar, Izod test, ASTM D256 Molding Sheet
107±455 16±91
(4)
Hardness
Ð
Rockwell, R scale Sward, 3-mil ®lm
50±115 52±61
(4) (1)
Index of refraction n
Ð
Ð
1.47
(4)
Refractive index increment dn=dc
ml gÿ1
MeOH, 436 nm, 298 K
0.130
(17)
Dielectric constant "00
Ð
298 K, 1 MHz 298 K, 1,000 Hz 298 K, 60 Hz
2.8±3.9 3.0±4.1 2.5±4.0
(1)
Power factor
Ð
298 K, 1 Hz 298 K, 60 Hz
0.002±0.02 0.005±0.02
(1)
100
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylcellulose PROPERTY
UNITS
Resistivity
ohm cm
Surface tension
CONDITIONS ÿ1
VALUE 12
REFERENCE 14
Ð
10 ±10
(1)
mN mÿ1
Contact angle
32
(18)
Thermal conductivity
W mÿ1 Kÿ1
Ð
0.21
(19)
Water absorption
%
24 h at 50% RH
2
(1)
Permeability coef®cient P
m3 (STP) m sÿ1 mÿ2 Paÿ1 (1017 )
Permeant
Temp. (K)
H2 He N2 O2 Ar CO2 SO2 NH3 H2 O C2 H 6 C3 H8 n-C4 H10 n-C5 H12 n-C6 H14
293 298 298 298 298 298 298 298 298 298 298 298 298 298
(20) 65.3 40.1 3.32 19.0 7.65 84.8 198 529 6700 6.9 2.78 2.9 2.78 5.75
Cost
US$ kgÿ1
Supplier
Hercules Inc., 1313 North Market Street, Wilmington, Delaware 19894, USA
Ð
17.5±26
Ð
REFERENCES
1. Ethylcellulose, Chemical and Physical Properties. Hercules, Inc., Wilmington, Del., 1989. 2. Zhbankov, R. G. In Infrared Spectra of Cellulose and Its Derivatives, edited by A. B. I. Stepanov. Consultants Bureau Publishing, New York, 1966. 3. Prouchert, C. J. The Aldrich Library of FT-IR Spectra, 1st ed. Aldrich Chemical Co., Milwaukee, 1985. 4. Rudd, G. E., and R. N. Sampson. In Handbook of Plastics, Elastomers, and Composites, edited by C. A. Harper. McGraw-Hill, New York, 1992. 5. Burrell, H. Interchem. Rev. 14 (1955): 3. 6. Kent, D. J., and R. C. Rowe. J. Pharm. Pharmocol. 30 (1978): 808. 7. Grulke, E. A. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/555. 8. Barton, A. F. M. CRC handbook of Polymer-Liquid Interaction and Solubility Parameters. CRC Press, Baca Raton, Fla., 1990. 9. Moore, W. R., J. A. Epstein, A. M. Brown, and B. M. Tidswell. J. Polym. Sci. 23 (1957): 23. 10. Fuchs, O. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/399. 11. Gray, D. G. J. Appl. Polym. Sci., Appl. Polym. Symp., 37 (1983): 179. 12. Kurata, M., and Y. Tsunashima. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/31.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
101
Ethylcellulose 13. Zugenmaier, P. J. Appl. Polym. Sci., Polym. Symp., 37 (1983): 223. 14. GroÈbe, A. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. V/117. 15. Peyser, P. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VT/209. 16. Haynes, W. Cellulose: The Chemical That Grows. Doubleday, Garden City, N.Y., 1953. 17. Huglin, M. B. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/409. 18. Wu, S. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/411. 19. Yang, Y. In Physical Properties of Polymer Handbook, edited by J. E. Mark. AIP Press, Woodbury, N.Y., 1996. 20. Pauly, S. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VI/451.
102
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-propylene-diene monomer elastomers GARY W. VER STRATE AND DAVID J. LOHSE EP, EPM, EPR (as copolymer), EPDM (contains a third monomer, which provides up to 10 weight % of an ole®n site for cross-linking), ethene-propene-diene elastomers.
1ÿ5
ACRONYMS, ALTERNATIVE NAME
CLASS
Chemical copolymers; polyole®n copolymer; ter-polymer elastomer
STRUCTURE
( CH2
CH3 CH2 )x
( CH2
CH
CH3
CH )y
ENB shown as third monomer
2ÿ4
(
)z High plateau modulus (1.6 MPa) permits high ®ller loadings and cost-effective compounds, chemically inert, semicrystalline grades have high green strength.
2; 3; 6
PROPERTIES OF SPECIAL INTEREST
Type of polymerization: Ziegler-Natta or metallocene (e.g., VOCl3 =Et3 Al2 Cl3 , 30±708C, hydrocarbon solution, or Cp2 Zr/methalumoxane, hydrocarbon solution, 80±1208C.
2ÿ6
PREPARATIVE TECHNIQUES
Ethene, propene, ethylidene norbornene (ENB) or dicyclopentadiene or (DCPD), 1,4 hexadiene (4,4 HD), or vinyl norbornene (VNB) or norbornadiene (NBD).
2ÿ7 Ziegler-Natta gives better incorporation of bicyclic dienes than metallocenes; for straight-chain dienes the reverse is true. TYPICAL COMONOMERS
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Ceiling temperature
K
Polymerization at <1 MPa up to this temperature is possible
>440
(6)
Molecular weight (of repeat unit)
g molÿ1
50 mol% ethene, 1 mol% diene
35 (average)
(2±5)
Tacticity (stereoregularity)
% stereo-regular propene in elastomer grades
Vanadium or metallocene catalysis
0
(2±5, 8)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
103
Ethylene-propylene-diene monomer elastomers PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Head-to-head contents
%
Vanadium or metallocene catalysis
<3
(2±5, 8)
Degree of branching
% of molecules having long branches
Vanadium catalysis mostly by cationic diene coupling; metallocene by end group copolymerization; can be controlled (information available from manufacturers)
0±100
(2±5)
Typical molecular weight range of n polymer M
g molÿ1
500±5,000 as dispersants 2,000±300,000 as elastomers 5,000±5,000,000 in blends
Ð
(2±5, 7)
Typical polydispersity index (Mw =Mn )
Dimensionless
Controlled by catalyst choice, reactor type
1.5±50
(2±5)
Morphology in multiphase systems
As shown
Semicrystalline copolymers, blends, block copolymers Lamellae, width Lamellae, length Elastomer blends, major dimension
IR (characteristic absorption frequencies)
cmÿ1
208C, ®lms ±CH2 Isopropyl ±CH3 ±CH3
UV (characteristic absorption frequencies)
nm
208C in solution (broad, maximum, depends on diene type)
<200
(2±4)
NMR
ppm (chemical shift)
13
Speci®c carbons or protons have speci®c shifts
(3, 8)
Thermal expansion coef®cients
Kÿ1
1 atmosphere, no crystallinity
1=V
dV=dTP
7 10ÿ4
(2, 12, 13)
Compressibility coef®cients
barÿ1
208C
1=V
dV=dPT
5:8 10ÿ8
(2, 12, 13)
Reducing temperature T
K
150±2508C, 10±200 MPa
6,800
(12)
Reducing pressure P
MPa
150±2508C, 10±200 MPa
444±465
(12)
104
C, 1 H (see references for extensive detailed work)
(2±4, 9, 10) Ê 50±150 A 0.01±2 mm 0.5±10 mm
720 1,145 1,370
(2±4, 11)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-propylene-diene monomer elastomers PROPERTY
Reducing volume V
UNITS
3
cm g
ÿ1
CONDITIONS
VALUE
REFERENCE
150±2508C, 10±200 MPa
1.000
(12)
Density (amorphous)
g cmÿ3
208C, no diene present, <55 wt% ethene, the dienes ENB, DCPD, and VNB raise density as does crystallinity
0.854
(2, 12)
Solvents
Ð
Ambient
Aliphatic, aromatic, halogenated hydrocarbons
(2, 3, 14)
Nonsolvents
Ð
Ambient
Water, organic acids, ketones, polar halogenated hydrocarbons
(2, 3, 14)
Solubility parameter
(MPa)1=2
By SANS (depending on ethene %) By GLC
16±17
(13)
16
(15)
Phenyl ethyl ether, depends on exact composition n-Octyl acetate n-Decyl acetate n-Hexyl acetate
353
(2, 3, 14, 16±18)
300 278 334
Theta temperature
K
Interaction parameter
Dimensionless
n-Heptane, 300 K
0:35 0:08 Vpolymer
(2, 3, 14)
Second virial coef®cient
mol cm3 gÿ2
Trichlorobenzene, 1358C
9:9 10ÿ3 Mÿ0:18
(3, 19)
Mark-Houwink parameters: K and a
K ml gÿ1 a None
Trichlorobenzene, 1358C
K 2:9 10ÿ2 a 0:726
(3, 19)
Huggins constants k0
Ð
Theta solvents, depends on polymer molecular weight
0.4±0.8
(18)
Characteristic ratio hr2 i0 =nl2
Ð
Phenyl ethyl ether, 808C SANS, 208C
6.9 6.9
(16) (17)
Lattice
Ð
Methylene units crystallize into a polyethene lattice, methyl groups can incorporate somewhat
Orthorhombic
(2, 14)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
105
Ethylene-propylene-diene monomer elastomers PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Unit cell dimensions
Ê A
1 atm, 208C, ±CH2 ± sequences only, methyl group causes expansion
a 7:418 b 4:946 c 2:546
(2, 3, 14, 20)
Unit cell contents
Number of mers Ethene crystallinity
2
(2, 3, 14, 20)
Degree of crystallinity
%
Depends on ethene content
0±50
(2, 3)
Heat of fusion (of repeat units)
kJ molÿ1 cal gÿ1
DSC on samples annealed at 0±4.4 0±35 208C >48 h, varies with ethene content
(2, 3)
Density (crystalline)
g cmÿ1
1 atm, 208C
0.997 (can be reduced by defects to 0.99 and below)
(2, 3, 20)
Glass transition temperature
K
1 atm, DSC, dynamic mechanical, depends on ethene content, lowest at about 50% ethene; crystallinity confuses the issue at high ethene contents
213±240
(2, 3, 21)
Melting point
K
1 atm, DSC, depends on 218±373 ethene content; often melts just above last annealing temperature; will crystallize down to Tg
(2, 3)
Heat capacity (of repeat units)
kJ Kÿ1 molÿ1
DSC, 1 atm
0.078
(2, 3, 12)
Polymers with which miscible
Ð
MW < 150,000
Head-to-head polypropylene Ethylene-butene copolymers of similar comonomer content
(22)
Tensile modulus
MPa
106
MW < 100,000
208C, low strain rate, ®lled 3±7 compound 25% rubber, 50% carbon black, 25% oil tested at 1 sÿ1
(2, 3, 6, 23)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-propylene-diene monomer elastomers PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Shear modulus
MPa
208C, low strain rate, ®lled compound 25% rubber, 50% carbon black, 25% oil
1±4
(2, 3, 6, 23)
Storage modulus
MPa
High molecular weight gum rubber, 208C, 1 Hz
0.16
(6, 15)
Loss modulus, tan
Ð
High molecular weight gum rubber, 208C, 1 Hz
0.2
(6, 15)
Tensile strength
MPa
Dependent on compounding and test conditions, typical compounds at 208C, 1 sÿ1
0.5±50 5±25
(2, 3, 6, 23, 24)
Maximum extensibility %
L=L0 r
Dependent on compounding and test conditions
200±800
(2, 3, 6, 23)
Hardness
Shore A values
Dependent on compounding and test conditions
10±100
(2, 3, 23)
Poisson's ratio
Ð
0±508C, strained at 100 sÿ1 or less
0.49
(6, 11)
Plateau modulus
MPa
20±1508C
1.6
(6, 15)
Entanglement molecular weight
g molÿ1
208C, Me RT G8N
1,300
(2, 3, 6, 21)
WLF parameters: C1 and C2
C1 None C2 K
T0 300 K, depends on composition
(3, 6, 21, 25) C81 5:4, 4.1 C82 148, 122
Index of refraction nD
Ð
1 atm, no diene, 238C No crystallinity, 908C 1258C
1.4740 1.4524 1.4423
(2, 3)
Refractive index increment dn=dc
ml gÿ1
Trichlorobenzene, 1358C
ÿ0.104
(3)
Dielectric constant "0
Ð
208C, 103 Hz, 1 atm, depends on the 2.8 compound, a good insulator
(2, 3, 14, 23)
Dielectric loss "00
Ð
208C, 103 Hz, 1 atm, depends on the 0.2 compound 0.25
(2, 3, 14)
Resistivity
log R, ohm cm
1 atm, 208C, depends on compound, 3±14 generally a good insulator
(2, 14, 26±28)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
107
Ethylene-propylene-diene monomer elastomers PROPERTY
UNITS
Molar polarizability
cm
Surface tension Interfacial tension
CONDITIONS
3
VALUE
REFERENCE ÿ26
Frequency
4:4 10
(2, 3)
mN mÿ1
208C, 1 atm, increases with ethene content
29.4±36.8
(28, 29)
mN mÿ1
With PDMS, 208C With PS, 1408C
3.2±5.3 5.1±5.9
(28, 29)
He 258C
16.0±24.0 (10ÿ17 ) 3.7±4.1 (10ÿ17 )
(30)
(2, 3, 31)
Permeability coef®cient ([m3 ] [m])/([S] [m2 ] [T Pa])
N2 258C
Thermal conductivity
W mÿ1 Kÿ1
208C, 1 atm
0.355
Melt viscosity
Pa s
Newtonian at 1008C
4 10ÿ5 M3:6 (3, 21)
Melt index
g
2.2 kg, 1908C, depends completely on polymer molecular weight
0.001±50
(2, 3, 23)
Mooney viscosity
Mooney units
1258C
5-100
(2, 3, 23)
Pyrolyzability, amount % of product remaining
>5008C
<0.3%
(2, 3, 32)
Severe decomposition
K
N2 blanket
580
(2, 32)
Maximum use temperature
K
Open atmosphere
450
(2, 3, 23)
Decomposition temperature
K
Nitrogen atmosphere, 1 minute
570
(2, 3, 32)
Scission, G factor, G
s
mol Jÿ1
irradiation, depends on ethene and diene content
1.1±5.9 (10ÿ8 )
(2, 24, 33)
Cross-linking, G factor, mol Jÿ1 G
x
irradiation, depends on ethene and diene content
2.7±22.6 (10ÿ8 )
(2, 24, 33)
Gas evolution, G factor, mol Jÿ1 G(gas)
irradiation, depends on ethene and diene content
3:4 10ÿ7
(24)
Water absorption
108
% volume 168 h, 55% ethylene glycol in water, 1 increase boiling % tensile change ÿ1
(23)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-propylene-diene monomer elastomers PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
Cost
US$ kg
Ð
2.60
(34±36)
Availability
Ð
Ð
ktons
(3, 34±36)
Suppliers
Exxon Chemical; DSM; JSR; Mitsui; DuPont-Dow; Uniroyal; Bayer
(3, 35)
REFERENCES
1. D1418 Rubber and Rubber Latices - Nomemclature. American Society for Testing and Materials 2. Baldwin, F. P., and G. Ver Strate. Rubber Reviews 44 (1972): 709. 3. Ver Strate, G. In Encyclopedia of Polymer Science and Engineering, 2d ed., edited by H. F. Mark, et al. John Wiley and Sons, New York, 1987, vol. 6, p. 522. 4. Cesca, S. J. Macromol. Sci., Macromolecular Reviews, 10 (1972): 1. 5. Banzi, V., et al. Die Angew Makromol. Chemie, 229 (1995): 113. 6. Mark, J., B. Erman, F. Eirich. Science and Technology of Rubber, 2d ed. Academic Press, New York, 1994, p. 70 (catalysis), pp. 157, 211, 495 (mechanical properties). 7. See the proceedings of Flexpo Conferences. Chemical Market Resources, Houston, (281) 3333313. 8. Trillo, I., et al. Macromolecules, 28 (1995): 342 (and references therein). 9. Ver Strate, G., et al. Flexpo '97. Chemical Market Resources, Houston, 1997. 10. Hess, W. M., C. R. Herd, and P. C. Vegvari. Rubber Reviews 66 (1993): 330. 11. D3900-94 Determination of Ethylene Units in EPM and EPDM. American Society for Testing and Materials. 12. Walsh, D. J., et al. Macromolecules 25 (1992): 5,236. 13. Krishnamoorti, R. PhD Thesis, Princeton, 1994. 14. Brandrup, J., and E. Immergut, ed. Polymer Handbook, 3d ed. John Wiley and Sons, New York, 1989. 15. Schuster, R. H., H. M. Issel, and V. Peterseim. Rubber Chem. and Tech. 69 (1996): 769. 16. Bruckner, S., et al. Eur. Polym. J. 10 (1974): 347. 17. Zirkel, A., et al. Macromolecules 25 (1992): 954. 18. Mays, J. W., and L. J. Fetters. Macromolecules 22 (1989): 921. 19. Scholte, Th. G., et al. J. Appl. Pol. Sci. 29 (1984): 3,763. 20. Wunderlich, B. Crystals of Linear Macromolecules. American Chemical Society, Washington, D.C., 1973. 21. Gotro, J. E., and W. W. Graessley. Macromolecules 17 (1984): 2,767. 22. Krishnamoorti, R., et al. Macromolecules 27 (1994): 3,073. 23. Vistalon Users Guide. Exxon Chemical Co., Houston. 24. Bohm, G. A., and J. O. Tveekrem. Rubber Reviews 55 (1982): 575. 25. Ferry, J. D. Viscoelastic Properties of Polymers, 3d ed., John Wiley and Sons, New York, 1980. 26. Aminabhavi, T. M., P. E. Cassidy, and C. M. Thompson. Rubber Reviews 63 (1990): 451. 27. Thompson, C. M., and J. S. Allen. Rubber Chem. and Tech. 67 (1994): 107. 28. Wu, S. Polymer Interface and Adhesion. Marcel Dekker, New York, 1982. 29. Roe, R. J. J. Colloid Interface Sci. 31 (1969): 228. 30. Paul, D. R., and A. T. Dibenedetto. J. Polymer Sci., Part C, 10 (1965): 17. 31. Mark, H. F., et al., eds. Encyclopedia of Chemical Technology. Wiley-Interscience, New York, 1978. 32. Sircar, A. Rubber Reviews 65 (1992): 503. 33. Odian, G., D. Lamparella, and J. Canamare. J. Polymer Sci. Part C, 16 (1968): 3,619. 34. Annual reports on synthetic rubber. Chemical and Engineering News. 35. Blue Book. Bill Communications, New York. 36. Rubber Red Book. Communications Channels, Inc., Atlanta.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
109
Ethylene-vinyl acetate copolymer PING XU EVA; A-C1 (Allied Signal); Elvax1 (DuPont); Levapren1 (Bayer); Microthene1 , Spectratech1 , Ultrathene1 (Quantum Chemical); Modic1 , Novatec1 (Mitsubishi Kasei); PDX1 (LNP) ACRONYMS, TRADE NAMES
Chemical copolymers
STRUCTURE
ÿCH2 ÿCH2 ÿm ÿÿCH2 ÿCHÿn ÿ ÿ ÿ
CLASS
O
CO CH3
Film extrusion, packaging, wire and cable insulation, adhesives, coatings, and compounding.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
crack resistance.
Flexibility and toughness, good adhesion, and stress
PROPERTY
UNITS
CONDITIONS*
VALUE
REFERENCE
Linear thermal expansion coef®cient
Kÿ1
ASTM D696, no composition given
16±25 10ÿ5
(1)
Density
g cmÿ3
ASTM D792, 9±28% vinyl acetate
0.93±0.95
(2)
Solubility parameter
(MPa)1=2
Halogenated aliphatic and aromatic liquids, 208C 30% vinyl acetate 40% vinyl acetate 67% vinyl acetate Halogenated aliphatic and aromatic liquids, 308C 30% vinyl acetate 40% vinyl acetate 67% vinyl acetate
Interaction parameter
110
Ð
29% vinyl acetate, 1508C, inverse GC, in®nite solution Acetaldehyde Acetic acid Benzene 1-Butanol 2-Butanol Cyclohexane
(3) 19.0 19.2 19.0 18.8 18.9 18.9 (4, 5) 0.16 1.12 ÿ0.02 0.65 0.51 0.07
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-vinyl acetate copolymer PROPERTY
UNITS
Interaction parameter
Ð
Glass transition temperature
K
Melting point
K
CONDITIONS*
Dioxane Ethanol Hexane Methanol Octane 2-Propanol Tetrahydrofuran m-Xylene
VALUE
0.45 1.28 0.25 1.69 0.23 0.93 0.25 ÿ0.02
30% vinyl acetate, Mn 27,000 g molÿ1 , Mw 110,000 g molÿ1 40% vinyl acetate, Mn 25,000 g molÿ1 , Mw 130,000 g molÿ1
231
30% vinyl acetate, Mn 27,000 g molÿ1 , Mw 110,000 g molÿ1 40% vinyl acetate, Mn 25,000 g molÿ1 , Mw 130,000 g molÿ1
345
(3)
235 (3)
318
Brittleness temperature
K
ASTM D746 9% vinyl acetate, melt index 2:2 g/10 min 9% vinyl acetate, melt index 9:8 g/10 min 15% vinyl acetate, melt index 8:2 g/10 min 15% vinyl acetate, melt index 30 g/10 min 18% vinyl acetate, melt index 1:5 g/10 min 18% vinyl acetate, melt index 30 g/10 min 19% vinyl acetate, melt index 0:45 g/10 min 19% vinyl acetate, melt index 30 g/10 min 28% vinyl acetate, melt index 3:1 g/10 min
<197 <197 <197 <197 <197 <197 <197 <197 <197
Vicat softening temperature
K
ASTM D1525, ring and ball method 9% vinyl acetate, melt index 2:2 g/10 min 9% vinyl acetate, melt index 9:8 g/10 min 15% vinyl acetate, melt index 8:2 g/10 min 15% vinyl acetate, melt index 30 g/10 min 18% vinyl acetate, melt index 1:5 g/10 min 18% vinyl acetate, melt index 30 g/10 min 19% vinyl acetate, melt index 0:45 g/10 min 19% vinyl acetate, melt index 30 g/10 min 28% vinyl acetate, melt index 3:1 g/10 min
356 348 339 334 334 327 335 331 322
Tensile strength at break
MPa
ASTM D638 9% vinyl acetate, melt index 2:2 g/10 min 9% vinyl acetate, melt index 9:8 g/10 min 15% vinyl acetate, melt index 8:2 g/10 min 15% vinyl acetate, melt index 30 g/10 min 18% vinyl acetate, melt index 1:5 g/10 min
13.9 11.7 12.8 10.4 13.5
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
REFERENCE
(2)
(2)
(2)
111
Ethylene-vinyl acetate copolymer PROPERTY
UNITS
Tensile strength at break
MPa
Elongation at break
CONDITIONS*
VALUE
REFERENCE
18% vinyl acetate, melt index 30 g/10 min 19% vinyl acetate, melt index 0:45 g/10 min 19% vinyl acetate, melt index 30 g/10 min 28% vinyl acetate, melt index 3:1 g/10 min
9.0 19.3 8.1 15.2
%
ASTM D638 9% vinyl acetate, melt index 2:2 g/10 min 9% vinyl acetate, melt index 9:8 g/10 min 15% vinyl acetate, melt index 8:2 g/10 min 15% vinyl acetate, melt index 30 g/10 min 18% vinyl acetate, melt index 1:5 g/10 min 18% vinyl acetate, melt index 30 g/10 min 19% vinyl acetate, melt index 0:45 g/10 min 19% vinyl acetate, melt index 30 g/10 min 28% vinyl acetate, melt index 3:1 g/10 min
740 675 730 750 850 700 740 680 750
1% Secant modulus
MPa
ASTM D638 9% vinyl acetate, melt index 2:2 g/10 min 9% vinyl acetate, melt index 9:8 g/10 min 19% vinyl acetate, melt index 0:45 g/10 min 19% vinyl acetate, melt index 30 g/10 min 28% vinyl acetate, melt index 3:1 g/10 min
75.9 93.1 33.1 29.7 18.6
Dart drop impact
F50 gÿ3
ASTM D1709 9% vinyl acetate, melt index 2:2 g/10 min 9% vinyl acetate, melt index 9:8 g/10 min 15% vinyl acetate, melt index 8:2 g/10 min 18% vinyl acetate, melt index 1:5 g/10 min
300 305 310 >600
Flexural modulus
MPa
ASTM D790, no composition given
53.1
Hardness
Shore D/A values
ASTM D2240 9% vinyl acetate, , melt index 2:2 g/10 min 9% vinyl acetate, melt index 9:8 g/10 min 15% vinyl acetate, melt index 30 g/10 min 18% vinyl acetate, melt index 1:5 g/10 min 18% vinyl acetate, melt index 30 g/10 min 19% vinyl acetate, melt index 30 g/10 min 28% vinyl acetate, melt index 3:1 g/10 min
93 34 30 42 30 88 78
Dielectric strength
V milÿ1
ASTM D149, no composition given, 0.31-cm thick specimen
620±760
(1)
Water absorption
%
ASTM D570, no composition given, 24 h
0.005±0.13
(1)
(A) (D) (D) (D) (D) (A) (A)
(2)
(2)
(2)
(1) (2)
The melt index values were obtained with ASTM D1238.
112
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-vinyl acetate copolymer REFERENCES
1. Modern Plastics Encyclopedia'96. McGraw-Hill, New York. 2. Ultrathene1 High Ethylene Vinyl Acetate Copolymers, Resins, Key Properties and Applications. Quantum Chemical Corporation, USI Division product bulletin, Cincinnati, 1992. 3. Lath, D., E. Lathova, and J. M. G. Cowie. In Prepr. Short Contrib. Bratislava IUPAC 5th Int. Conf. Modif. Polym. 2 (1979): 225. 4. Dincer, S., and D. C. Bonner. Macromolecules 11 (1978): 107. 5. Aspler, J. S. Chromatogr. Sci. 29 (1985): 399.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
113
Ethylene-vinyl alcohol copolymer PING XU ACRONYMS, TRADE NAMES
(Bayer) CLASS
EVA, Clarene1 (Colortech); Eval1 (Eval); GL1 ; Levasint1
Chemical copolymers ÿCH2 ÿCH2 ÿm ÿÿCH2 ÿ CHÿn ÿ
STRUCTURE
OH
MAJOR APPLICATIONS
Coextrusion, ®lm lamination, coatings, and food packaging.
PROPERTIES OF SPECIAL INTEREST
solvents, etc.
Superior barrier properties to gases, fragrances,
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Linear thermal expansion coef®cient
Kÿ1
32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
11 10ÿ5
(1)
Density
g cmÿ3
ASTM D1505 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
12 10ÿ5 13 10ÿ5
1.20
(1)
1.19 1.17 1.14
Interaction parameter
Ð
No composition given, 208C, water
1.2±1.8
(2)
Heat of fusion
J gÿ1
32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
81.9
(1)
32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min
30,037
Heat of combustion
114
J gÿ1
81.1 79.8 (1)
31,200
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-vinyl alcohol copolymer PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
32,366
Heat of combustion
Jg
44 mol% vinyl alcohol, melt index 13:0 g/10 min
Glass transition temperature
K
Dynamic viscoelasticity 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
Melting point
Tensile modulus
Tensile strength at break
Elongation at break
K
MPa
MPa
%
DSC 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min ASTM D638 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min ASTM D638 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min ASTM D638 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
345
REFERENCE
(1)
342 335 328
464
(1)
454 448 437
3,138
(1)
2,648 2,352 2,062
71.6
(1)
71.6 46.1 51.0
200
(1)
230
115
Ethylene-vinyl alcohol copolymer PROPERTY
UNITS
Elongation at break
%
Izod impact strength
Rockwell hardness
Taber abrasion
Bending strength
CONDITIONS
38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
J mÿ1
ASTM D255, notched 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
Ð
ASTM D785 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
mg
ASTM D1175, 1,000 times 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
MPa
ASTM D790 27 mol% vinyl alcohol, melt index 3:0 g/10 min 32 mol% vinyl alcohol, melt index 3:8 g/10 min 38 mol% vinyl alcohol, melt index 3:8 g/10 min
VALUE
REFERENCE
280 380
58.7
(1)
90.7 64.1 53.4
104
(1)
100 93 88
1.2
(1)
2.0 2.2
149
(1)
128 108
Surface resistivity
ohm
Various ®lms
1.9±2:7 1015
(1)
Volume resistivity
ohm cm
Various ®lms
0.47±1:2 1013
(1)
Thermal conductivity
W mÿ1 Kÿ1
32 mol% vinyl alcohol, melt index 3:8 g/10 min 44 mol% vinyl alcohol, melt index 13:0 g/10 min
0.35
(1)
116
0.36
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ethylene-vinyl alcohol copolymer PROPERTY
UNITS 3
CONDITIONS
VALUE
REFERENCE
Water permeability
cm 25 mm (m2 day atm)ÿ1
Eval ®lms, 408C
21.7±124
(3)
Oxygen permeability
cm3 25 mm (m2 day atm)ÿ1
Eval ®lms, 238C
0.095±1.8
(3)
Water absorption
%
24 h, Eval1 F resins
0.19±7.7
(4)
The melt index values were obtained with ASTM D1238.
REFERENCES
1. Eval1 Ethylene Vinyl Alcohol Copolymers Resins: Resins, Key Properties and Applications. Eval Company of America product bulletin, Lisle, Ill., 1992. 2. Barton, A. F. M. CRC Handbook of Polymer-Liquid Interaction Parameters and Solubility Parameters. CRC Press, Boca Raton, Fla., 1990. 3. Permeability and Other Film Properties of Plastics and Elastomers. Plastics Design Library, New York, 1995. 4. Elias, H. G., and F. Vohwinkel. New Commercial Polymers 2. Gordon and Breach Science Publishers, New York, 1986.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
117
Fullerene-containing polymers WARREN T. FORD AND ALANTA LARY CLASS
Cage structure polymers
STRUCTURES
(
(
(
n
(
HNR
H
(
(
Si n
(CH2)3
N
C6H5 C6H5 CH2
In epoxy resin R4
R3
R2
NHCH2CH2 R1 1
(
y
(
(
(
H
( C6H5
N
x
x
x = 1 or 2
(
C60
n
C60
C6H5
(
(
( x
(
n
OCH3
O
4
C60 x
5
3
2
COHN O n
NHOCO
(
(
C60 x 7
6
Electrical and optical materials, crosslinking of elastomers, and low-friction ®lms, none of which are commercial.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
nonlinear optical activity.
118
Electrical conductivity, photoconductivity, and
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Fullerene-containing polymers STRUCTURE
C60 (wt %)
Mn (g molÿ1 )
Mw =Mn
SOLVENTS
ANALYSES
REFERENCE
(1)
1 (R1)
18
20,000
NR
Toluene, CS2
13
1 (R2)
2.6
20,000
NR
Toluene, THF, heptane
IR
1 (R3)
4.3
12,100
1.24
Toluene
UV,
2
29
12,300
3.1
CHCl3 , THF, C6 H5 Cl UV-vis, IR, 1 H NMR, DSC, TGA
(4)
3
0.5
146,000
1.06
THF, toluene
Light scattering
(5)
3
0.9
82,000
Bimodal Ð
Ð
Ð
3
14
5,300, 3,000
Bimodal THF
Ê SANS Rg 19:6 A
(6)
4
5
14,500
1.12
Toluene, THF
DSC, photoconductivity
(7)
4
2.2
12,900
1.8
Benzene, 1,4-dioxane Ð
(8)
4
14
38,000 (Mw )
NR
CHCl3 , toluene, o-C6 H4 Cl2
Ð
(9)
5
7.7
4,200
1.8
Ð
13
(10)
5
1.2
23,000
1.4
Ð
GPC (UV, RI, LS, viscometry)
(11)
6
NR
18,000
1.45
THF : DMF (3 : 1)
IR, DSC, TMA
(12)
1 (R4)
19
Ð
Ð
Insoluble
TGA, coeff. friction
(13)
Photo polymer of C60 (7)
100
(720)n , n 1±21
Ð
Insoluble
MS, SEM, IR, Raman, XRD, LDMS
(14) (15)
Pressure polymer of C60 (7)
100
(720)n
Ð
Insoluble
XRD, Raman, IR, MAS NMR
C MAS NMR, IR, UV-vis, TGA
(2) 13
C NMR, DSC
C NMR, DSC, TGA
13
C
(3)
(16)
Single-walled carbon nanotubes
1.38 nm diameter > 1 mm long XRD, SEM, TEM, single- (17) in ropes of 100±500 tubes rope < 10ÿ4 ohm cm at 300 K
Multiwalled carbon nanotubes
Average 7 nm diameter 2 mm TEM, tensile modulus long 1:8 106 MPa
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(18)
119
Fullerene-containing polymers REFERENCES
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
120
Geckeler, K. E., and A. Hirsch. J. Am. Chem. Soc. 115 (1993): 3,850±3,851. Patil, A. O., and G. W. Schriver. Macromol. Symp. 91 (1995): 73±79. Weis, C., C. Friedrich, R. MuÈhlhaupt, and H. Frey. Macromolecules 28 (1995): 403±405. Hawker, C. J. Macromolecules 27 (1994): 4,386±4,387. EderleÂ, Y., and C. Mathis. Macromolecules 30 (1997): 2,546±2,555. Wignall, G. D., et al. Macromolecules 28 (1995): 6,000±6,006. Wang, C., et al. Polym. Bull. 37 (1996): 305±311. Cao, T., and S. E. Webber. Macromolecules 29 (1996): 3,826±3,830. Sun, Y.-P., et al. Macromolecules 29 (1996): 8,441±8,448. Camp, A. G., A. Lary, and W. T. Ford. Macromolecules 28 (1995): 7,959±7,961. Ford, W. T., T. D. Graham, and T. H. Mourey. Macromolecules 30 (1997): 6,422±6,429. Chiang, L. Y., L. Y. Wang, and C.-S. Kuo. Macromolecules 28 (1995): 7,574±7,576. Nigam, A., et al. J. Chem. Soc., Chem. Commun. (1995): 1,547±1,548. Rao, A. M., et al. Science 259 (1993): 955±957. Cornett, D. S., et al. J. Phys. Chem. 97 (1993): 5,036±5,039. Persson, P.-A., et al. Chem. Phys. Lett. 258 (1996): 540±546. Thess, A., et al. Science 273 (1996): 483±487. Treacy, M. M. J., T. W. Ebbesen, and J. M. Gibson. Nature 381 (1996): 678±680.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Gelatin W. BROOKE ZHAO CLASS
Polypeptides and proteins
ÿÿ
GlycineÿXÿYÿ n X and Y are frequently proline and hydroxy-proline, respectively. STRUCTURE
Food, pharmaceutical, photographic, and biodegradable packaging materials.
MAJOR APPLICATIONS
The ability of gelation by temperature changes. Relatively low cost. The polypeptide backbone is biodegradable. Manufacturing from waste.
PROPERTIES OF SPECIAL INTEREST
Thermal denaturation and physical and chemical degradation of collagen.
PREPARATIVE TECHNIQUES
PROPERTY
UNITS
Amino acid composition
Numbers per 1,000 residues
CONDITIONS
Alaine Arginine Asparagine Aspartic acid Cysteine Glutamic acid Glutamine Glycine Histidine Hydroxyproline Hydroxylysine Isoleucine Leucine Lysine Methionine Phenylalanine Proline Serine Threonine Tryptophan Tyrosine Valine
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
VALUE
REFERENCE
Type A
Type B
112 49 16 29 Ð 48 48 330 4 91 6.4 10 24 27 3.6 14 132 35 18 Ð 2.6 26
117 48 0 46 0 72 0 335 4.2 93 4.3 11 24.3 28 3.9 14 124 33 18 Ð 1.2 22
(1)
121
Gelatin PROPERTY
UNITS
CONDITIONS ÿ1
VALUE
REFERENCE 4
Alpha Beta Gamma Limed-ossein Weight-average Number-average
9:65 10 1:93 105 2:89 105 2:2 105
1 ÿ >5 105
5±15 104
(1)
Bloom
Depending on source and extracting conditions
75±330
(1)
Density
g cmÿ3
Ð
1.35
(2)
IR (characteristic absorption frequencies)
cmÿ1
ÿCO stretching ÿNH stretching
1,650 3,300
(3)
Common solvents
Water (warm), acetic acid, tri¯uro-ethanol, formamide, ethylene glycol, glycerol, dimethyl sulfoxide
(1)
Common nonsolvents
Ethanol, acetone, tetrahydrafuran
(1)
Isoionic pH
Ð
Type A Type B
pKa of the ionizable side groups of gelatin
Ð
Anionic amino acid Conc. (mmol gÿ1 ) Aspartic acid 0.50, 0.32 Glutamic acid 0.78, 0.52 Tyrosine 0.011±0.044 -COOH 0.011 Cationic amino acid Lysine 0.30 Hydroxylysine 0.054 Arginine 0.53 Histidine 0.044 -NH2 0.011
Molecular weight (of repeat unit)
g mol
Gel rigidity
Mark-Houwink parameters: K and a
K ml gÿ1 a None
Calf skin gelatin
Radius of gyration
Ê A
Alpha Beta Gamma
122
Pig skin
4.8±5.2 7±9 4-4.5 4.5 10 3.6
(1) (4)
10±10.4 9.5 >12 6.5±7 7.8 K 1:66 10ÿ5 a 0:885 K 1:10 10ÿ4 a 0:74
(5)
138 215 257
(1)
(6)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Gelatin PROPERTY
UNITS
CONDITIONS
Radius of gyration
Ê A
Solvent
Mw (ossein gelatin)
1.0 M KCNS, 258C, pH 5:1 0.15 M NaCl, 408C pH 5:1 pH 3:1
90,000
175
89,000 88,000 Mw (Type B )
165 175
0.05 M phosphate 1.0 M KCNS 1.0 M KCNS 1.0 M KCNS
2:7 105 3:02 105 3:83 105 5:96 105 Mw (bovine corium extract)
302 302 242 280
8:33 106 7:45 105 3:45 105 2:32 105 2:02 105 Mw 10ÿ5
2,410 444 314 371 345
Alcohol±water ratio 2:1 2:5:1 2.5: 1 3:0:1 2.5: 1 3:0:1 2.5:1 3:0:1 3.0:1 3:5:1
VALUE
REFERENCE
(7)
(8)
(9)
(10)
3.3 (acid-precusor) 0.2 M KCl 3.3 (alkali-precusor) 0.2 M KCl Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3
452 447 350 40
(11)
3:2 1
(11)
Radius of gyration of the crosssection Rc
Ê A
Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3
Root-mean-square end-to-end distance
r 2 1=2
Ê A
Solvent
Expansion coef®cient
Ð
Universal constant
Ð
Mw (Type B gelatin) 5
0.05 M phosphate 1.0 M KCNS 1.0 M KCNS 1.0 M KCNS
2:7 10 3:02 105 3:83 105 5:96 105
Solvent
Mw (Type B gelatin)
1.0 M KCNS 1.0 M KCNS
5
3:83 10 5:96 105
Solvent
Mw (Type B gelatin)
1.0 M KCNS 1.0 M KCNS
3:83 105 5:96 105
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(8) 740 740 590 685 (8) 1.25 1.25 (8) 21
1:29 10 1:63 1021
123
Gelatin PROPERTY
Second virial coef®cient A2
UNITS
CONDITIONS 3
ÿ2
mol cm g
Solvent
VALUE
REFERENCE
Mw (ossein gelatin) 4
1.0 M KCNS, 258C 9 10 pH 5:1 0.15 M Nalco, 408C pH 5:1 8:9 104 pH 3:1 8:8 104 Mw (Type B) 5
(7) ÿ4
2:6 10
2:9 10ÿ4 6:0 10ÿ4
(8)
ÿ4
0.05 M phosphate 2:7 10 3:02 105 1.0 M KCNS 3:83 105 1.0 M KCNS 5:96 105 1.0 M KCNS Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3
2:4 10 2:6 10ÿ4 3:3 10ÿ4 2:4 10ÿ4
3 1 10ÿ4
(11)
Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3
20 3
(11)
Ê ÿ1 Rousselot gelatin, photographic grade, Mass per unit length g molÿ1 A Mw 1:9 105 , Mw =Mn 2:3
28 8
(11)
Persistence length l
Screen length
Ê A
Ê A
Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3 1% 2% 5%
(11) 70 10 51 5 35 3
Ê A
Quasi-elastic light scattering, dilute solution, Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3, concentration ranges from 5 to 15%
Ê Sizes of A inhomogeneities a
Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3 1% 2% 5%
Ð 220 135 2 10ÿ7 (fast-mode) 3:5 10ÿ8 (slow-mode)
Hydrodynamic screen length h
z-average self-diffusion coef®cient hD0 iz
cm2 sÿ1
Quasi-elastic light scattering, dilute solution Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3
Hydrodynamic radius Rh
Ê A
Quasi-elastic light scattering, Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3 In dilute solution In semi-dilute solution
124
25±100
(12)
(11)
(12)
(12) 220 210
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Gelatin PROPERTY
UNITS
CONDITIONS
VALUE
Flory-Huggins interaction parameter
Ð
Type A gelatin 283.15 K 293.15 K
0.497±0.498 0.497
Self-diffusion coef®cient D
cm2 sÿ1
Gelatin, quasielastic neutron scattering
Volume fraction 0.031 0.063 0.129 0.199 0.274 0.353
1:36 107 1:01 107 7:1 106 6:1 106 5:3 106 4:9 106
Collective self-diffusion coef®cient Dcoll
cm2 sÿ1
Gelatin, quasielastic neutron scattering
Volume fraction 0.031 0.063 0.129 0.199 0.274 0.353
4:8 106 5:2 106 5:2 106 5:4 106 5:1 106 4:8 106
Single-particle self-diffusion coef®cient Ds-p
cm2 sÿ1
Gelatin, quasielastic neutron scattering
Volume fraction 0.031 0.063 0.129 0.199 0.274 0.353
8:8 106 4:9 106 1:9 106 7:0 105 2:0 105 1:0 105
Residence time 0
s
Gelatin, quasielastic neutron scattering
Volume fraction 0.031 0.063 0.129 0.199 0.274 0.353
2.0 2.7 9.8 22 66 165
Speci®c optical rotation []
Degree
Alpha Beta Gamma Limed-ossein
ÿ137 ÿ137 ÿ137 ÿ137
(1)
Refractive index
Ð
Dry, 546:1 nm
1.54
(15)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
REFERENCE
(13)
(14)
(14)
(14)
(14)
125
Gelatin PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Refractive increment dn=dc
Ð
300 nm 436 nm Ossein gelatin H2 O, 258C 0.1 M NaCl, 258C 1.0 M NaCl, 258C 1.0 M KCNS, 258C 2.0 M KCNS, 258C Bovine corium extract H2 O, 408C 0.25 M NaCl, 408C 0.10 M KCl, 408C 0.25 M KCl, 408C 1.0 M KCl, 408C Type B gelatin 1.0 M KCNS, 308C 0.1 M KH2 PO4 , 308C 0.1 M K2 HPO4 , 308C 632:8 nm, Rousselot gelatin, photographic grade, Mw 1:9 105 , Mw =Mn 2:3
0.187
(16)
Dilatometry Viscoelastic Viscoelastic Viscoelastic Thermomechanical DTA, viscoelastic
368 393 463 (calculated) 453 473 448 10 (uncross-linked) 469 3 (cross-linked)
(18)
Dilatometry DTA, X-Ray Viscoelastic DTA, TGA DSC DTA, X-Ray
418 491 493 503 (calculated) 503 503
(18)
pH 3.05 3.60 4.75 7.10 8.50 9.35 9.85
107.2 107.2 72.2 72.2 72.2 72.2 108.8
Glass transition temperature Tg
K
DTA, viscoelastic Melting temperature Tm
K
Activation energy of kJ molÿ1 hydrolysis
126
0.194 0.1925 0.186 0.185 0.173 0.192 0.192 0.192 0.192 0.176 0.172 0.172 0.172 0.18
(7)
(9) (9) (9) (9) (17) (8)
(11)
(19)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Gelatin PROPERTY
UNITS
CONDITIONS
Contact angle of water
Degrees
15% aqueous gelatin gel, 208C Gelatin hydrogel Air-equilibrated surface Fresh-cut wet surface Gelatin ®lm, Langmuir-Bloggett process Surface in contact with air Surface in contact with benzene
Tensile strength
MPa
Type B, uniaxially oriented in water, 2 at stretching 0.2±0.25
Biaxial Type A, uniaxially oriented in water, 2 at stretching 0.2±0.25
Biaxial
Tensile modulus
MPa
VALUE
Stretching ratio (%) 0 65 120 145 180 87 0 75 125 155 190 110 160 50 90 110
Type B, uniaxially oriented Stretching ratio (%) in water, 2 at 0 stretching 0.2±0.25 65 120 145 180 87 0 Biaxial Type A, uniaxially 75 oriented in water, 2 at 125 stretching 0.2±0.25 155 190 110 160 50 Biaxial 90 110
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
75 110 36 110 90 25.61 41.57 63.39 84.84 27.87(?)* 74.94 28.36 54.48 80.88 109.19 139.80 60.46(?)* 44.31(?)* 50.68 104.47 128.37 473 690 790 1300 930(?)* 1345 631 890 1090 1240 1690 1100(?)* 1040(?)* 1090 1200 1570
REFERENCE
(20) (21) (22)
(23)
(23)
127
Gelatin PROPERTY
UNITS
CONDITIONS
Elongation at break
%
Type B, uniaxially oriented in water, 2 at stretching 0.2±0.25
Toughness
MPa
Type B, uniaxially oriented in water, 2 at stretching 0.2±0.25
Stretching ratio (%) 0 65 120 145 180 87 Biaxial Type A, uniaxially 0 oriented in water 2 at 75 125 stretching 0.2±0.25 155 190 110 160 Biaxial 50 90 110 Stretching ratio (%) 0 65 120 145 180 87 Biaxial Type A, uniaxially 0 oriented in water, 2 at 75 125 stretching 0.2±0.25 155 190 110 160 50 Biaxial 90 110
VALUE
7.7 8.3 12.3 8.3 3.6(?)* 15.5 6.7 11.4 14.9 21.6 22.5 7.7(?)* 5.5(?)* 5.86 14.5 18.4 1.24 2.31 5.00 4.05 0.60(?)* 8.93 1.26 4.15 8.42 17.13 23.85 3.00(?)* 1.45(?)* 1.86 9.51 17.56
REFERENCE
(23)
(23)
*Property measured at the direction perpendicular to the orientation direction.
REFERENCES
1. Rose, P. I. In Encyclopedia of Polymer Science and Engineering, Vol. 7, edited by H. F. Mark et al. John Wiley and Sons, New York, 1987. 2. Chien, J. C. W. J. Macromol. Sci. Rev. Macromol. Chem. 12 (1975): 1. 3. Veis, A. Macromolecular Chemistry of Gelatin. Academic Press, New York, 1964, p. 49. 4. Kenchington, A. W., and A. G. Ward. Biochem. J. 58 (1954): 202. 5. Pouradier, J., and A. M. Venet. J. Chem. Phys. 47 (1950): 391. 6. Pouradier, J., and A. M. Venet. J. Chem. Phys. 49 (1950) 85. 7. Boedtker, H., and P. Doty. J. Phys. Chem. 58 (1954) 968. 8. Gouinlock, E. V., Jr., P. J. Flory, and H. A. Scheraga. J. Polym. Sci. 16 (1955): 383. 9. Veis, A., D. N. Eggenberger, and J. Cohen. J. Am. Chem. Soc. 77 (1955): 2,368. 128
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Gelatin 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
Veis, A., and J. Cohen. J. Polym. Sci. 26 (1957): 113. Pezron, I., M. Djabourov, and J. Leblond. Polymer 32 (1991): 17. Herning, T., M. Djabourov, J. Leblond, and G. Takerkart. Polymer 32 (1991): 3,211. Holtus, G., H. CoÈlfen, and W. Borchard. Progr. Colloid. Polym. Sci. 86 (1991): 92. Mel'nichenko, Y. B., and L. A. Bulavin. Polymer 32 (1991): 3,295. Sklar, E. Photogr. Sci. Eng. 13 (1969): 29. Lewis, M. S., and K. A. Piez. Biochemistry 3 (1964): 1126. Veis, A., and J. Cohen. J. Am. Chem. Soc. 78 (1956): 6,238. Yannas, I. V. J. Macromol. Sci. Revs. Macromol. Chem. C7(1) (1972): 49. Marshall, A. S., and S. E. B. Petrie. J. Photogr. Sci. 28 (1980): 128. Yasuda, T., T. Okuno, and H. Yasuda. Langmui, 10 (1994): 2,435. Wolfram, E., and C. Stergiopulos. Acta Chim. Acad. Sci. Hung. 92 (1977): 157. Mironjuk, N. V., and B. D. Summ. Vysokomol Soedin., Ser. 24 (1982): 391. (a) Zhao, W., Ph.D. Thesis, University of Cincinnati, 1995. (b) Zhao, W., et al. J. Macromol. Sci. Pure Appl. Chem. A33(5) (1996): 525. (c) Zhao, W., et al. CHEMTECH 26 (1996): 32.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
129
Glycogen RACHEL MANSENCAL CLASS
Carbohydrate polymers; polysaccharides.
STRUCTURE Branched glucan. -D-glucopyranosyl units joined by -D-(1 ! 4) glycosidic linkages.
1ÿ2
CH2OH O O
OH
CH2OH
O OH
CH2 O
O O
OH
O
OH
OH
O OH
Biological function restricted to source of energy. Principal food-reserve materials in animals. Found in cells of vertebrates and invertebrates. No commercial use.
1ÿ2
FUNCTIONS
Extraction with hot concentrated alkali. But extensive degradation. Milder extraction with cold trichloracetic acid solution, dimethyl sulfoxide, or water-phenol mixtures.
1ÿ6
EXTRACTION
After extraction, redissolution in distilled water; low speed centrifugation (100 g); precipitation with excess ethanol; high speed centrifugation (1,500 g).
2
PURIFICATION
Amorphous polymer; very high molecular weight; polydisperse; highly soluble; very good hydrodynamic behavior.
1ÿ2
PROPERTIES OF SPECIAL INTEREST
PROPERTY
UNITS
Molecular weight
g mol
Average degree of polymerization
CONDITIONS ÿ1
VALUE
REFERENCE 8
Rabbit liver
2:7 10
Ð
Ð
Ð
1:7 106
(1±2)
Average chain length
Ð
Depending on the source of the glycogen and the method used
6±21
(1±2)
Average interior chain length
Ð
Depending on the source of the glycogen and the method used
2±5
(1±2)
Morphology
Ð
-particle 100 -particles -particle diameter 25 nm
Ð
(2)
130
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Glycogen Action of enzymes on glycogen
2
Enzyme
Glucosidic bond attacked
Source
Phosphorylase Amylo-1,6-glucosidase
1 ! 4-
1 ! 4-
1 ! 6-
1 ! 6-
1 ! 4- (1 ! 6-
1 ! 4-
Plants, microbes, mammals Yeast, mammals
Pullulanase Glucoamylase Isoamylase -Amylase
Aerobacter aerogenes Microbes Cytophaga pseudomonas Sweet potato, cereals
Weight mean sedimentation coef®cients of glycogen fraction
2 Fraction number
s020; w at boundary
S
Absolute range
S
sw
S
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 46 114 225 353 495 651 818 915 1,182 1,378 1,581 1,792 2,008 2,231 2,464 2,714 2,998 3,361 3,953 7,010
0±85 0±181 40±292 150±419 278±561 420±717 576±884 743±1,061 920±1,249 1,107±1,444 1,303±1,648 1,507±1,858 1,717±2,074 1,933±2,298 2,156±2,531 2,389±2,781 2,639±3,064 2,923±3,428 3,286±4,020 3,878±7,077 Ð
26 85 175 291 422 570 732 904 1,087 1,278 1,478 1,658 1,898 2,117 2,346 2,588 2,855 3,178 3,647 4,335 Ð
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
131
Glycogen Z-average standard diffusion coef®cients of glycogen fractions
2 Fraction number
Dz
10ÿ8 cm2 sÿ1
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
2:56 0:02 2:7 0:4 4:3 0:3 5:90 0:07 5:8 0:1 5:1 0:1 4:3 0:1 3:6 0:1 3:4 0:1 3:01 0:05 2:74 0:07 2:73 0:04 2:59 0:04 2:42 0:04 2:6 0:2 2:27 0:06 2:42 0:06 2:21 0:04 2:18 0:02 2:5 0:1
Hydrodynamic parameters for glycogen subfractions
2; 7 Fraction number
Average molecular weight
10ÿ6
Scheraga-Mandelkern function
10ÿ6
Viscosity (ml gÿ1 )
Frictional ratio
f =fmin
20 19 18 17 1±16
6 20 26 32 48±1600
0.61 0.71 1.26 1.75 2:06 0:17
14 9 6.5 6.0 6:7 0:4
7.1 5.0 2.6 1.8 1:7 0:1
REFERENCES
1. BeMiller, J. N. In Encyclopedia of Polymer Science and Engineering, 2d ed., edited by H. F. Mark, et al. John Wiley and Sons, 1989, vol. 3, p. 545±551. 2. Geddes, R. In The Polysaccharides, edited by G. O. Aspinal. Academic Press, New York, 1985, vol. 3, p. 283±336. 3. P¯uger, E. F. W. Arch. Gen. Physiol. 129 (1909): 362. 4. Stetten, M. R., H. M. Katzen, and D. Setten, Jr. J. Biol. Chem. 222 (1956): 587. 5. Whistler, R. L., and J. N. Be Miller. Arch. Biochem. Biophys. 98 (1962): 120 6. Laskov, R., and E. Margoliash. Bull. Res. Counc. Isr., Sect A, 11(4) (1963): 351. 7. Geddes, R., J. D. Harvey, and P. R. Wills. Biochem. J. 163 (1977): 201.
132
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Hydridopolysilazane DONNA M. NARSAVAGE-HEALD ACRONYM CLASS
HPZ
Polysilazanes
EMPIRICAL FORMULA
SiH39:7
Me3 Si24:2
NH37:3
N22:6
MAJOR APPLICATION
Composites
Preceramic polymer; melt-spinnable polymer; produces a ceramic ®ber upon pyrolysis.
PROPERTIES OF SPECIAL INTEREST
Condensation (step) polymerization: Exothermic reaction; temperature rises to 758C. Mixture is heated to 1508C and eventually to 200±2308C. Reaction of trichlorosilane with hexamethyldisilazane (1 : 3 mol ratio) in Ar purged ¯ask at room temperature.
1
PREPARATIVE TECHNIQUE
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight
g molÿ1
GPC data
Mn 3,800 Mw 15,100 Mz 38,000
(1)
NMR
ppm
1
0.2, broad, SiMe 1.0, broad, NH 4.8, broad, SiH
(1)
Glass transition temperature
K
TMA
368
(1)
Melt viscosity
P
Determined using a viscometer in a glove box; at 503 K
100
(1)
Pyrolyzability, nature of product
Ð
38C minÿ1 to 1,2008C under high purity N2
Silicon carbonitride
(1)
Pyrolyzability, amount of product
Ð
TGA, N2 ¯ow
74%
(1)
Pyrolyzability, impurities remaining
Ð
38C minÿ1 to 1,2008C under high purity N2
5 wt% carbon, 2.2 wt% oxygen
(1)
Decomposition temperature
K
TGA
563
(1)
Fiber spinning
Ð
Inert atmosphere
Fibers 15±20 mm obtained
Ð
Important patents
H
U.S. Patent 4,535,007 U.S. Patent 4,543,344
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(2) (3)
133
Hydridopolysilazane REFERENCES
1. Legrow, G. E., et al. Am. Cer. Soc. Bull. 66(2) (1987): 363±367. 2. Cannady, J. P. U.S. Patent 4,535,007 (13 August 1985). 3. Cannady, J. P. U.S. Patent 4,543,344 (24 September 1985).
134
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Hydroxypropylcellulose YONG YANG ACRONYM CLASS
HPC
Carbohydrate polymers
STRUCTURE
CH2OR O
H O
H OR
H
H
OR
H
(R is CH2 CH(OR0 )CH3 or H, R0 is R or H) Paints, coatings, inks, adhesives, cosmetics, papers, pharmaceuticals, encapsulation.
MAJOR APPLICATIONS
PROPERTIES OF SPECIAL INTEREST
Water and alcohol soluble.
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Molecular weight (of repeat unit)
g molÿ1
Molar substitution
MS 3:0
336
Ð
Preparation
Cellulose NaOH ! Na-cellulose (alkali cellulose) Na-cellulose Propylene oxide ! Hydroxypropylcellulose
Density
g cmÿ3
Water cast ®lm
1.17
(2)
13
Ð
Ð
Ð
(3)
cmÿ1
Assignment (OH ) side chain stretching (OH) ring stretching (CH3 ) asymmetric stretching (CH2 ) asymmetric stretching (CH2 ) symmetric stretching (CH3 ) symmetric stretching and CH ring stretching (CH3 ) asymmetric bending deformation (OH CH) side chain bending deformation (OH CH) ring bending deformation (CH3 ) symmetric bending deformation (OH CH) ring bending deformation (OH CH) side chain bending deformation
C NMR
IR (characteristic absorption frequencies)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(1)
3,450 3,440 2,965 2,930 2,900 2,870
(2, 4)
1,455 1,425 1,410 1,373 1,324 1,300 135
Hydroxypropylcellulose PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
Assignment (CH) ring bending deformation (CÿOÿC) ring asymmetric stretching (CÿO) side chain stretching (CÿOÿC) ring asymmetric stretching (CÿOÿC) side chain asymmetric stretching (CÿO) ring stretching (CÿOÿC) ether bridge asymmetric stretching
1,265
REFERENCE
IR (characteristic absorption frequencies)
cm
Solvents
Acetic acid , acetone , acetonitrile , benzene:water (1 : 1), chloroform, cyclohexanone, dichloroacetice acid , dichloromethane , N,N-dimethylacetamide , dimethylformamide , dimethylsulfoxide , dioxane , ethanol , ethylene glycol monomethyl ether , formamide , formic acid , 2-hydroxyethyl methacrylate , isopropanol , methanol , 2-methoxyethanol , methyl ether ketone , morphloline , 2,20 -oxydiethanol , 1-pentanol , phenol , 1,2-propanediol , 1-propanol , propylene glycol, pyridine , tetrahydrofuran, triethyl phosphate , tri¯uoroacetic acid , trimethyl phosphate , water
(5±10)
Nonsolvents
Aliphatic hydrocarbons, benzene, carbon tetrachloride, methyl chloroform, toluene, trichloroethylene
(5±10)
1,150 1,126 1,120 1,085 1,055 1,045
Forms liquid crystalline mesophase
Solubility parameter () and interaction parameter () at in®nite dilution
11; 12 Solvent
(MPa1=2 )
Acetic acid Acetic anhydride Acetone 1-Butanol n-Butyl acetate Cyclohexane Cyclohexanol Cyclohexanone N-Decane Dichloromethane N,N-dimethylformamide Dimethylsulfoxide Diethyl ether 1,4-Dioxane Ethanol N-haptane Methanol 1-Proponal 2-Proponal
25.6 20.8 19.3 24 17.2 16.3 21.0 20.1 18.8 19.8 29.3 25.8 15.1 19.3 26 14.8 29 24 24
ÿ2.28 ÿ1.65 0.38 0.26 0.14 0.96 2.31 0.18 1.83 ÿ0.38 ÿ0.01 ÿ0.19 ÿ0.14 0.06 0.38 0.10 0.47 0.26 0.43
136
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Hydroxypropylcellulose Solvent
(MPa1=2 )
Pyridine Tetrachloromethane Tetrahydrofuran Toluene Trichloromethane Water
21.0 16.8 18.6 17.7 18.0 47
ÿ0.42 0.45 ÿ0.12 0.17 ÿ0.73 1.55
By inverse GC; MS 4:0; Mw 105 ; 323.4 K.
Unit cell dimension
2 Lattice
Tetragonal
Monomers per unit cell
Chains per unit cell
Cell dimension (AÊ) a
b
c
6
2
11.3
11.3
15.0
PROPERTY
UNITS
CONDITIONS ÿ1
0 Km
VALUE
REFERENCE
0 Km
0:121 a 1:17
(13)
Irregular 31 helix
(2)
Mark-Houwink parameters: K and a
K ml g a None
Chain conformation
Ð
(DP Degree of polymerization), ethanol, 258C Ð
Degree of crystallinity
%
Water cast ®lm
14.9
(2)
Heat of fusion (of repeat units)
kJ molÿ1
Melting point depression due to a diluent
10.6
(2)
Entropy of fusion (of repeat units)
kJ molÿ1
Melting point depression due to a diluent
0.021
(2)
Density
g cmÿ3
Amorphous region, 248C Crystalline region, MS 4:0, calculated from crystallographic data
1.088 2.054
(2)
Glass transition temperature
K
Dynamic mechanical property measurement
298
(14)
Melting point
K
MS 4
481
(2)
Mesomeric transition temperature
K
Isotropic to cholesteric
433±473
(15)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
137
Hydroxypropylcellulose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Tensile modulus
MPa
Ð MS 4:25, H2 O cast MS 4:25, MeOH cast MS 4:25, DMAc cast
414 440 1240 570 703 6:2 102
(16) (17) (17) (17) (8) (18)
MS 4:0, lightly cross-linked, Mc 1:23 103 g molÿ1 Storage modulus
MPa
288±413 K, 110 Hz
2:5±0:3 103
(5)
Loss modulus
MPa
288±413 K, 110 Hz
2:6±0:4 102
(5)
Tensile strength
MPa
Ð MS 4:25, H2 O cast MS 4:25, MeOH cast MS 4:25, DMAc cast
13.8 9.3 24 9 16 16
(16) (17) (17) (17) (19) (18)
50
(20) (17)
MS 4:0, lightly cross-linked, Mc 1:23 103 g molÿ1 Maximum extensibility
%
Ð Cross-head speed 5 mm minÿ1 MS 4:25, H2 O cast MS 4:25, MeOH cast MS 4:25, DMAc cast Cross-head speed 2:5 mm minÿ1 , MS 4:0, lightly cross-linked, Mc 1:23 103 g molÿ1
17.3 3.5 7.0 100
(18)
Index of refraction n
Ð
Ð
1.48
(2)
Refractive index increment dn=dc
ml gÿ1
Ethanol, 546 nm Water, 436 nm Water, 546 nm Water, 578 nm
0.120 0.146 0.143 0.143
(20)
Dielectric constant "00
Ð
1,000 Hz, 297 K 101.3 kPa, 38% RH 133 Pa, 0% RH
9.07 6.71
Dielectric loss "00
Ð
1,000 Hz, 297 K 101.3 kPa, 38% RH 133 Pa, 0% RH
0.0706 0.0408
Resistivity
ohm cmÿ1
297 K, 101.3 kPa, 38% RH 133 Pa, 0% RH
5 109 9 1011
138
(1)
(1)
(1)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Hydroxypropylcellulose PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Water absorption
%
50% RH, 296 K 84% RH, 296 K
4 12
(1)
Supplier
American International Chemical, Inc., 17 Strathmore Road, Natick, Massachusetts 01760, USA Barrington Chemical Corp., 16 School Street, Rye, New York 10580, USA Hercules, Inc., 1313 North Market Street, Wilmington, Delaware 19894, USA
REFERENCES
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
KLUCEL Hydroxypropylcellulose. Hercules, Inc., Wilmington, Del., 1987. Samuels, R. J. J. Polym. Sci., Part A-2, 7 (1969): 1,197. Kimura, K., T. Shigemura, M. Kubo, and Y. Maru. Macromol. Chem. 186 (1985): 61. Zhbankov, R. G. In Infrared Spectra of Cellulose and Its Derivatives, edited by A. B. I. Stepanov. Consultants Bureau Publishing, New York, 1966. Gray, D. G. J. Appl. Polym. Sci., Applied. Polym. Symp., 37 (1983): 179. Fuchs, O. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/379. Nishio, T., T. Yamane, and T. Takahashi. J. Polym. Sci., Polym. Phys. Ed., 23 (1985): 1,043. Bheda, J., J. F. Fellers, and J. L. White. Colloid and Polym. Sci. 258 (1980): 1,335. Werbowyj, R. S., and D. G. Gray. Macromolecules 17 (1984): 1,512. Werbowyj, R. S., and D. G. Gray. Macromolecules 13 (1980): 69. Barton, A. F. M. CRC handbook of Polymer-Liquid Interaction and Solubility Parameters. CRC Press, Boca Raton, Fla., 1990. Aspler, J. S., and D. G. Gray. Macromolecules 12 (1979): 5,626; Polymer 23 (1982): 43. GroÈbe, A. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. V/117. Suto, S., M. Kudo, and M. Karasawa. J. Appl. Polym. Sci. 31 (1986): 1,217. Shimaura, K, J. L. White, and J. F. Fellers. J. Appl. Polym. Sci. 26 (1981): 2,165. Just, E. K., and T. G. Magewicz. In Encyclopedia of Polymer Science and Engineering, edited by H. F. Mark, et al. Wiley-Interscience, New York, Vol. 3, 1985. Suto, S., Tashiro, H., and M. Karasawa. J. Appl. Polym. Sci. 45 (1992): 1,569. Yang, Y. Ph.D. Thesis. University of Cincinnati, 1993. Yanajida, N., and M. Matsuo. Polymer 33(5) (1992): 996. Huglin, M. B. In Polymer Handbook, 3d ed., edited by J. Brandrup and E. H. Immergut. John Wiley and Sons, New York, 1989, p. VII/466.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
139
Kevlar BRENT D. VIERS PPTA, poly( p-phenylene terephthalamide), aramid, aramide, polyaramid, polyaramide
ACRONYM, ALTERNATIVE NAMES
IUPAC NOMENCLATURE
phenylenecarbonyl) CAS REGISTRY NUMBER CLASS
Poly(imino-1,4-phenyleneiminocarbonyl-1,424938-64-5
Aromatic polyamides
STRUCTURE
N
N
H
H
O
O
C
C
Cut, heat, and bullet-fragment resistant apparel, brake and transmission friction parts, gaskets, ropes and cables, composites, ®ber-optic cables, circuit-board reinforcement, sporting goods, tires, automotive belts and hoses.
MAJOR APPLICATIONS
MAJOR FORMS
Continuous ®lament yarn, staple, wet and dry pulp ¯oc, cord.
High tensile strength at low weight, low elongation to break, high modulus (structural rigidity), low electrical conductivity, high chemical resistance, low thermal shrinkage, high toughness (work-to-break), excellent dimensional stability, high cut resistance, ¯ame resistant, self-extinguishing.
PROPERTIES OF SPECIAL INTEREST
OTHER POLYMER SHOWING THIS SPECIAL PROPERTY
Polybenzamide in this handbook.) SUPPLIER
Polybenzamide. (See also the entry on
Kevlar is a registered trademark of E. I. Dupont de Nemours.
Preparative techniques PROPERTY
CONDITIONS
Condensation of terephthaloyl chloride and paraphenylene diamine
Interfacial polymerization Low temperature solution condensation
Direct syntheses
Yamazaki procedure (PBA): Para-aminobenzoic acid (pABA) Pyridine (as acid scavenger) (Py) N-methyl pyrrolidone (NMP) Triphenyl phosphate activator (TPP) Lithium chloride (LiCl) Dry conditions/inert atmosphere
140
VALUE
REFERENCE
(1)
pABA 0:75 mol lÿ1 (2) NMP=Py 3 (v/v) 3.7% LiCl2 (w/v) TPP=pABA 0:6 T 1158C (higher Mw when TPP added stepwise)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar PROPERTY
Direct syntheses
CONDITIONS
VALUE
REFERENCE ÿ1
Yamazaki procedure (PPTA) Terephalic acid (TA) p-Phenylene diamine (PPD) NMP, TPP, LiCl
TA PPD 0:125 mol l NMP=Py 1:5 (v/v) TPP=TA 2:0 2.7% LiCl, T 1158C
Higashi Procedure (PBA): As Yamazaki, with calcium chloride (CaCl2 )
[pABA] = 0.27 mol lÿ1 NMP=Py 5 (v/v) TPP=pABA 0:6 1.7% LiCl (w/v); 5.0% CaCl2 (w/v) T 1158C (Higher Mw when TPP added stepwise)
Higashi procedure (PPTA): As Yamazaki, with CaCl2
TA PPD 0:083 mol lÿ1 NMP=Py 5 (v/v) TPP=TA 2:2 1.7% LiCl (w/v); 5.0% CaCl2 (w/v) T 1158C
(2)
Effect of salt in the synthesis of PBA
2 LiCl2 (% w/v)
CaCl2 (% w/v)
LiCl CaCl2 (% w/v)
inh (dl gÿ1 )
3.7 3.7 0.9 1.6 1.4 6.7
0.0 11.3 2.8 4.8 0.0 0.0
3.7 15.0 3.7 6.4 1.4 6.7
2.00 2.15 0.85 1.53² 1.82² 2.19²
²
[pABA] 0.75; NMP/Py 3; [TPP]/[pABA] 0.6. [pABA] 0.27; NMP/Py 5; [TPP]/[pABA] 0.6; T 1158C.
Effect of salt in the synthesis of PPTA
2 LiCl2 (% w/v)
CaCl2 (% w/v)
LiCl CaCl2 (% w/v)
inh (dl gÿ1 )
2.7 0.7 0.0 5.5 6.7 0.0 1.7
0.0 2.0 3.5 0.0 0.0 6.7 5.0
2.7 2.7 3.5 5.5 6.7 6.7 6.7
0.32 0.21 0.24 1.22² 1.16² 1.26² 6.84²
²
[TA] 0.125; NMP/Py 1.5; [TPP]/[TA] 2.0. [TA] 0.083; NMP/Py 5; [TPP]/[TA] 2.0.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
141
Kevlar Effect of reactant ratios in the synthesis of PBA
2 [TPP]/[pABA]
inh (dl gÿ1 )
0.4 0.6 0.8 1.0 0.4 0.6 0.8 1.0
0.31 2.00 1.80 1.26 0.10² 1.53² 1.38² 1.40²
²
Yamakazi conditions: [pABA] 0.75; NMP/Py 3; 3.7% LiCl. Higashi conditions: [pABA] 0.27; NMP/Py 5; 1.7% LiCl; 5.0% CaCl2 ; T 1158C.
Effect of reactant ratios in the synthesis of PPTA
2 [TPP]/[TA]
inh (dl gÿ1 )
1.3 1.7 2.0 2.3 2.0 2.2 2.4
0.24 0.36 0.31 0.38 6.84² 8.15² 6.89²
Yamakazi conditions: [TA] 0.125; NMP/Py 1.5; 2.7% LiCl; T 1158C. ² Higashi conditions: [TA] 0.083; NMP/Py 5; 1.7% LiCl; 5.0% CaCl2 .
Effect of temperature in the synthesis of PBA
2 Temperature (8C)
inh (dl gÿ1 )
105 110 115 120
1.70 1.66 2.19 1.53
142
Yamakazi conditions: [pABA] 0.27; NMP/Py 5; [TPP]/ [pABA] 0.6; 6.7% LiCl.
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar
2
Effect of temperature in the synthesis of PPTA Temperature (8C)
inh (dl gÿ1 )
100 110 115 120 107 115 122
0.28 0.36 0.31 0.37 7.71² 8.15² 6.27²
Yamakazi conditions: [TA] 0.125; NMP/Py 1.5, [TPP]/ [TA] 2.0, 2.7% LiCl.) ² Higashi conditions: [TA] 0.083; NMP/Py 5, [TPP]/ [TA] 2.2; 1.7% LiCl, 5.0% CaCl2 .)
PROPERTY
UNITS ÿ1
Molecular weight of repeat unit
g mol
Typical polydispersity index (Mz : Mw : Mn )
g molÿ1 ratios
CONDITIONS
VALUE
REFERENCE
Poly( p-phenylene terephthalamide)
240.2
Ð
Ð
>4:5 Mz : 1:6 Mw : 1 Mn >5:3 Mz : 1:57 Mw : 1 Mn Mw : Mn 1:85 (Mw 12,300) Mw : Mn 1:63 (Mw 6,300) Mw : Mn 1:37 (Mw 5,300)
(3) (3) (4)
Rods (in weaves, ®bers, etc.)
Ð
Morphology in multiphase systems
Ð
Composites
Raman (characteristic absorption frequencies)
cmÿ1
Kevlar 29, 49 ®bers NC torsion, CC out of plane 92 (m) bending CC in plane bending; ring torsion 106 (m) NH out of plane bending; NC 225 (w) torsion CC in plane bending; CO out of 265 (w) plane bending CC out of plane bending; ring 414 (w) asymmetric torsion CC ring in plane deformation 629 (w) CH out of plane deformation, CO 695 (w) bending Amide V 710 (w) 733 (w) CO in plane bending; ring asymmetric CH deformation; CN stretching
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(4) (4)
(5)
143
Kevlar PROPERTY
UNITS
Raman (characteristic absorption frequencies)
cm
ÿ1
CONDITIONS
VALUE
REFERENCE
CH out of plane deformation; CCC ring puckering deformation 1 : 4 substituted ring deformation CH out of plane deformation; ring CC stretching, ring bending, and ring torsion Ring out of plane bending !4 ring and ring CH deformation !4 ring and ring CH in plane deformation NH bending, CH stretching Ring CH bending !3 symmetric ring puckering/aromatic CH in plane bending !14 ring vibration; ring CH bending Amide II vibration, (NH) and (CN) !2 (aromatic ring) CC stretching vibration Amide 1 (CO) stretching
788 (m)
(5)
815 (vw) 843 (w) 915 (m) 1,182 (m) 1,190 (sh) 1,277 (s) 1,328 (s) 1,412 (vw) 1,517 1,569 1,611 1,647
(m) (w) (vs) (m)
Raman depolarization ratios
5 (cmÿ1 )
Kevlar ?
Kevlar 29 ?
Kevlar 49 ?
1,182 1,190 1,277 1,328 1,412 1,517 1,569 1,611 1,647
0:54 0:02 0:55 0:02 0:57 0:01 0:56 0:01 0:55 0:05 0:57 0:02 0:64 0:05 0:53 0:01 0:53 0:02
0:56 0:02 0:56 0:02 0:56 0:01 0:54 0:01 0:57 0:05 0:54 0:02 0:62 0:05 0:55 0:01 0:56 0:02
0:30 0:01 0:32 0:01 0:32 0:01 0:30 0:01 Ð 0:32 0:01 0:33 0:04 0:30 0:01 0:30 0:01
PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
X-ray photoelectron (XPS)
eV
Kevlar 29, 49 ®bers
C 1s 284.6 (intense) O 1s 530.3 (intense) N 1s 399.7 (intense) C(KVV) 990 (weak Auger) N(KVV) 873 (weak Auger) O(KVV) 745 (weak Auger)
(6)
144
Valence band XPS is more sensitive to surface functionalized species, although the surface appears to be identical to the bulk
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Bragg spacings
Ð
hkl
d-value (nm)
2 (degree) ( 0:1542 nm)
Intensity
110 200 020 310 220 011 111 211 021 121 311
0.4327 0.3935 0.2590 0.2340 0.2163 0.4807 0.4102 0.3045 0.2539 0.2417 0.2302
20.53 22.60 34.63 38.46 41.75 18.46 21.66 29.33 35.35 37.20 39.12
vs vs vw m w vw ms s w vw vw
Thermal expansion coef®cients
Kÿ1
Solvents
Concentrated H2 SO4 Polar aprotic solvents (NMP/DMAc) w 5 wt% LiCl2
Ð
Nonsolvents
Aromatics, aliphatics, water, alcohols, ethers, esters
Ð
Kevlar 29 ®ber ASTM D3379-75e axial thermal expansion coef®cient
ÿ3:2 10ÿ6 ÿ2 10ÿ6 < < ÿ4 10ÿ6
(7)
(8)
Chemical resistances
9 Chemical
Conc. (%)
Temp. (8C)
Time (h)
Effect²
99.7 40 40 3 10 90 40 90 10 37 10 10 10 1 10 70 10 10 10
21 21 99 99 21 21 21 99 21 21 21 71 21 21 21 21 99 21 21
24 1,000 100 100 1,000 100 1,000 100 1,000 24 100 10 100 100 100 24 100 100 1,000
None Slight Appreciable Appreciable Appreciable None Moderate Degraded Appreciable None Appreciable Degraded None Slight Appreciable Appreciable Appreciable None Slight
Acids
Acetic Acetic Acetic Benzoic Chromic Formic Formic Formic Hydrobromic Hydrochloric Hydrochloric Hydrochloric Hydro¯uoric Nitric Nitric Nitric Oxalic Phosphoric Phosphoric
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
145
Kevlar Chemical
Conc. (%)
Temp. (8C)
Time (h)
Effect²
10 3 10 10 10 70
99 99 21 21 100 21
100 1,000 1,000 100 10 100
Appreciable None Moderate None Appreciable Moderate
28.5 28 50 40 10 10 10 0.1
21 21 21 21 21 99 100 21
24 1,000 24 100 1,000 100 10 1,000
None None None None None Degraded Appreciable Degraded
3 3 3 3 10 10 5
21 99 99 21 99 121 99
1,000 100 100 1,000 100 100 100
None Moderate Appreciable None None Appreciable Moderate
100 50/50 100
Boiling 99 113
100 1,000 100
Moderate Moderate Moderate
Acids
Phosphoric Salicylic Sulfuric Sulfuric Sulfuric Sulfuric Bases
Ammonium hydroxide Ammonium hydroxide Potassium hydroxide Sodium hydroxide Sodium hydroxide Sodium hydroxide Sodium hydroxide Sodium hypochlorite Salt solutions
Copper sulfate Copper sulfate Ferric chloride Sodium chloride Sodium chloride Sodium chloride Sodium phosphate Organic solvents
Carbon tetrachloride Ethylene glycol/H2 O Brake ¯uid ²
Chemicals not listed in the table have no noticeable effect. Effect on breaking strength: none 0±10% stress loss; slight 11±20% stress loss; moderate 21±40% stress loss; appreciable 41±80% stress loss; degraded 81±100% stress loss.
PROPERTY
UNITS
Phase diagrams
Solid/anisotropic solution/isotropic solution regimes
Fractionation
Ð
146
CONDITIONS
Chromatography 90% H2 SO4 96% H2 SO4 Tetrahydrofuran
VALUE
Preparative GPC, silica gel GPC GPC, shodex
REFERENCE
(10, 11) (12) (13) (13)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar PROPERTY
Mark-Houwink parameters: K and a
Persistence length
UNITS
CONDITIONS ÿ1
K ml g a None
Ê A
(a values greater than 1.7 indicate strong aggregation effects) 1:0 < a < 1:85 PBA 3,100 < Mw < 13,000 Concentrated H2 SO4 , 258C 96% sulfuric acid, 258 Electric birefringence, Kerr effect Light scattering, Rg Light scattering, depolarization ratio Light scattering depolarization Light scattering Light scattering Viscosity Flow birefringence Flow birefringence Flow birefringence Flow birefringence Depolarization ratio, unfractionated Depolarization ratio, unfractionated oligomer Mw < 10,900
Viscosity vs. shear rate
Viscosity vs. shear stress
poise
poise
Kevlar-100% H2 SO4 solutions, 258C 0.5 wt% Kevlar, 10ÿ1 sÿ1 < < 10 sÿ1 6±8 wt% Kevlar, 10ÿ2 sÿ1 < < 101 sÿ1 10 wt% Kevlar
10ÿ2 sÿ1
10ÿ1 sÿ1
100 sÿ1
101 sÿ1 Kevlar-100% H2 SO4 solutions, 258C 6±8 wt% Kevlar 101 dynes cmÿ2 < 12 < 104 dynes cmÿ2 10 wt% Kevlar 12 5 102 dynes cmÿ2 12 103 dynes cmÿ2 12 3 103 dynes cmÿ2
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
VALUE
REFERENCE
(14) K 2:14 a 1:203 PPTA 300 PBA 400 PPTA 200 PPTA 150 PPTA 287 PPTA 450 PBA 600 PPTA 200 PBA 400 PPTA 150 PBA 1050 PPTA 650 PBA 435 PPTA 275 PBA 325 PPTA 185 PPTA 1020 PPTA 306
2:1 1,100
(15) (12) (12) (16) (17) (18) (13) (13) (13) (13) (19) (19) (20) (20) (21) (22) (14) (14) (1)
30,000 6; 000 800 300 (1) 1,100 40,000 4,000 200
147
Kevlar PROPERTY
Normal stress vs. shear rate
UNITS
CONDITIONS
dynes cm
ÿ2
Kevlar-100% H2 SO4 solutions, 258C 6 wt% Kevlar
2 sÿ1
8 sÿ1 8 wt% Kevlar
1 sÿ1
8 sÿ1 10 wt% Kevlar
0:7 sÿ1
1 sÿ1
8 sÿ1
VALUE
REFERENCE
(1) N1 3,000 N1 105 N1 5,000 N1 105 N1 2 105 N1 5 104 N1 8 104
Bond lengths
Ê A
C(1)±C(2) C(2)±C(3) C(3)±C(4) C(1)±O(1) C(1)±N(1) N(1)±H(1) N(1)±C(8) C(8)±C(9) C(9)±C(10) C±H(phenyl)
1.47 1.39 1.39 1.24 1.34 1.00 1.42 1.39 1.39 1.00
(23)
Bond angles
Degrees
C(4)±C(3)±C(2) C(3)±C(2)±C(7) C(3)±C(2)±C(7) C(7)±C(2)±C(1) C(2)±C(1)±N(1) C(2)±C(1)±O(1) N(1)±C(1)±O(1) C(1)±N(1)±H(1) C(8)±N(1)±H(1) N(1)±C(8)±C(9) N(1)±C(8)±C(13) C(9)±C(18)±C(13) C(8)±C(9)±C(10)
120 120 120 120 120 120 115 123 120 117 120 120 120
(24)
Ð
Ð
(23)
Torsional potential diagram Ð Persistence length
148
Ê A
Extended all trans conformation (upper bound) PBA (no temp. dependence) PPTA (no temp. dependence) Rotatable amide group (lower bound) PBA at 200 K PBA at 600 K PBA at 300 K PPTA at 200 K PPTA at 600 K PPTA at 300 K
(23) 900 410 200 0 100 200 0 100
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Maximum temperature for liquid crystallinity
K
Ð
600
(23)
Lattice
Ð
Ð
Monoclinic (pseudo orthorhombic)
(24)
Space group
Ð
Ð
P21=n ±C2h
(24)
Chain conformation
Ð
Extended trans
Modi®cation 1,2
(24)
Unit cell dimensions
Ê A
Ð
a 7:80, b 5:19, c (®ber axis) 12.9
(24)
Unit cell angles
Degrees
Ð
90
(24)
Unit cell contents (number of repeat units)
Ð
Ð
2 chains/cell
(24)
Degree of crystallinity
%
Kevlar 49 H2 SO4 cast ®lm Annealed 1008C, 2 h Annealed 2008C, 2 h Annealed 3008C, 2 h
0.22 0.38 0.45
Polymorphs
Ð
Modi®cation I (PBA-LiCl3 DMAc) Modi®cation II (PBA-LiCl2 cocrystal) Modi®cation III (PBA) Lyotropic nematic
Glass transition temperature K
Ð
Melting point
In general beyond decomposition temperature (5008C) Modi®cation III(PBA)
Super-Tg transition temperatures
K
K
Modi®cation I (PBA-LiCl3 -DMAc) Modi®cation II (PBA-LiCl2 cocrystal) Modi®cation III (PBA)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
(25)
(26)
698
(27) (26)
827 I±II 487 K
(26)
I-amorphous wash with H2 O II±III anneal at 748 K, then cool II±III wash with H2 O I±III wash with H2 O and anneal >673 K 149
Kevlar PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Super-Tg transition temperatures
K
Modi®cation III (PBA)
II-nematic 748 K III-nematic 827 III-amorphous heat to 873 K and cool
(26)
Sub-Tg transition temperatures
Ð
f f f f f f f f f
Ea; 63 kJ molÿ1 Ea; 92 kJ molÿ1 Ea; 767 kJ molÿ1 Ea; 204 kJ molÿ1 Ea; 52 kJ molÿ1 Ea; 813 kJ molÿ1 Ea; 54 kJ molÿ1 Ea; 83 kJ molÿ1 Ea ; 21 kJ molÿ1
(28) (28) (29) (29) (30) (30) (30) (30) (30)
Polymers with which they are compatible
Ð
None known. Surface modi®cations for composites.
Tensile modulus
MPa
Ultimate Modulus D Kevlar 29 ®ber Kevlar 49 ®ber Kevlar 149 ®ber Twaron LM ®ber Twaron HM ®ber
165 103 83 103 124 103 161 103 76 103 105 103
(9)
Crystal modulus
MPa
Kevlar, Twaron ®bers XRD Kevlar, Twaron ®bers
156 103 220 103
Ð
Shear modulus
MPa
Kevlar ®bers in tension and compression
1,150
Ð
Storage modulus
MPa
Kevlar/100% H2 SO2 solutions 8 wt% Kevlar ! 0:02 Hz ! 0:1 Hz ! 0:5 Hz ! 1 Hz ! 5 Hz ! 10 Hz 10 wt% Kevlar ! 0:01 Hz ! 0:1 Hz ! 0:5 Hz ! 1 Hz ! 5 Hz ! 10 Hz
Gj Gj Gj Gj Gj Gj
1 10ÿ9 2 10ÿ9 1 10ÿ8 2 10ÿ8 7 10ÿ8 2 10ÿ7
(1)
Gj Gj Gj Gj Gj Gj
4 10ÿ7 5 10ÿ7 6 10ÿ7 7 10ÿ7 1 10ÿ6 2 10ÿ6
150
10,000 Hz 10,000 Hz 110 Hz 110 Hz 110 Hz 1 Hz 1 Hz 1 Hz 1 Hz
T 291 K T 417 K T 733 K T 333 K T 243 K T 816 K T 235 K T 440 K T 115 K
Ð
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar PROPERTY
UNITS
CONDITIONS
VALUE
Loss tangent vs. frequency
Ð
Kevlar/100% H2 SO4 solutions 8 wt% Kevlar ! 0:02 Hz ! 0:05 Hz ! 0:1 Hz ! 0:5 Hz ! 1 Hz ! 5 Hz ! 10 Hz 10 wt% Kevlar ! 0:01 Hz ! 0:1 Hz ! 1 Hz ! 10 Hz
tan 0:3 tan 0:4 tan 0:6 tan 0:9
REFERENCE
(1) tan 2 tan 3 tan 4 tan 5 tan 6 tan 5 tan 3
Tensile strength
MPa
LC solution spun Kevlar ®bers
2,000±3,000
Ð
Maximum extensibility
L=L0 r
%
Kevlar 29 ®ber in tension Kevlar 49 ®ber in tension
4.0 2.5
(27) (9)
Fracture stress
MPa
Fiber in tension Kevlar 29 ®ber Kevlar 49 ®ber Kevlar 149 ®ber Twaron LM ®ber Twaron HM ®ber
2,500 2,300 1,700 3,400 2,800
Fracture strain
%
Fiber in tension Kevlar 29 ®ber Kevlar 49 ®ber Kevlar 149 ®ber Twaron LM ®ber Twaron HM ®ber
2.5 1.8 1.0 2.4 2.5
Compressive strength
Four point bend of a ®ber embedded in a PMMA matrix
Ð
Tenacity (®ber)
MPa
Kevlar 49 Kevlar 29
2,800 2,800
(27)
Poisson ratio
Ð
Ð
0.36
9)
Force-temperature relationships
Ð
Kevlar 49 ®bers in ASTM D3379- Critical temp. for stressdrop decreases from 75e; force-temperature cycling 493 K to 198 K as 5 gpd applied load-heat to 1.0 gpd stress applied 3008C, cool to ambient
(8)
Axial expansivity, Kevlar ®ber At 200 K At 450 K
(6)
Thermal expansivity
ÿ0.8 ÿ0.7
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Ð
Ð
151
Kevlar PROPERTY
UNITS
CONDITIONS
VALUE
REFERENCE
Index of refraction n
Ð
n? index of refraction perpendicular to ®ber axis Kevlar 29 njj index of refraction parallel to ®ber axis
2.0499 (center of ®ber) 2.0853 (®ber edge)
(31)
Refractive index increment dn=dc
Segmental polarizability
1 ÿ 2 ,
jj ÿ ?
ml gÿ1
cm3
All values at 258C using a 633 nm source Chlorosulfonic acid Chlorosulfonic acid 0.01 M LiClSO3 H2 SO4 96% H2 SO4 Methane sulfonic acid Sulfuric acid (includes form effect) Copolymer with poly(benzamide) 1/9 PPTA/PBA ratio
Segmental optical anisotropy 02
Ð
Optical anisotropy 2
Ð
152
Light depolarization, unfractionated polymer Light depolarization, unfractionated oligomers, Mw < 10,900
1.5886 (center of ®ber) 1.6504 (edge of ®ber)
0.275 0.287
(32) (33)
0.278 0.309 (546 nm source) 0.254
(32) (13) (33)
1 ÿ 2 5; 250 10ÿ25
jj ÿ ? 206 10ÿ25
1 ÿ 2 4; 380 10ÿ25
(34, 35)
PPTA 0:266
(14)
PPTA 0:357
Depolarization ratio, fractionated PPTA M 1,560 g molÿ1 0.290 0.223 M 2,160 g molÿ1 M 2,760 g molÿ1 0.184 0.154 M 3,480 g molÿ1 M 4,560 g molÿ1 0.30 M 6,600 g molÿ1 0.103 0.094 M 7,920 g molÿ1 Unfractionated PPTA Mw 2,160 g molÿ1 0.270 Mw 4,320 g molÿ1 0.177 Mw 1,680 g molÿ1 0.294 Mw 4,500 g molÿ1 0.183 Mw 9,350 g molÿ1 0.164 Mw 19,700 g molÿ1 0.111 Mw 35,000 g molÿ1 0.105 Mw 43,500 g molÿ1 0.094 Mw 63,000 g molÿ1 0.084
(16)
(16) (16) (13) (13) (13) (13) (13) (13) (13)
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar PROPERTY
UNITS ÿ1
CONDITIONS
VALUE
REFERENCE
sd
40 4
Ð
Surface free energy
mJ m
dispersive
Heat of adsorption
kJ molÿ1
IGC adsorption Epoxystyrene on Kevlar 29 Aniline on Kevlar 29
45 3 11
Speci®c free energy of interaction
kJ molÿ1
Gsp Epoxystyrene on Kevlar 29 Aniline on Kevlar 29
5.6 11
Heat of hydration
kJ molÿ1
HH of Kevlar 29 Fiber
ÿ60
Ð
Ð
Ð
Permeability coef®cient (Kevlar 49 ®lm, H2 SO4 cast)
25 Gas (at 358C)
H2 He CO2 O2 N2
Annealed 2 h at 2008C
1008C
3008C
10,000 11,500 1,020 220 20
10,000 11,000 1,020 220 35
6,000 10,100 500 80
Amorphous Kevlar/Nomex copolymer
Ð Ð Ð 2,579 Ð
Values given in cm2 (STP) cm sÿ1 cmÿ2 cmHgÿ1 (10ÿ15 )
PROPERTY
Temperature dependence of permeability coef®cient P
UNITS 2
cm (STP) cm s cmÿ1 cmHg
CONDITIONS ÿ1
Linear (Arrhenius) decay for H2 and CO2 Amorphous Kevlar/Nomex copolymer 258C 658C Kevlar 49 H2 SO4 cast ®lm Annealed 1008C, 2 h 258C 658C Annealed 2008C, 2 h 258C 658C Annealed 3008C, 2 h 258C 658C
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
VALUE
REFERENCE
(25)
5:8 10ÿ12 0:9 10ÿ11 8 10ÿ13 1:5 10ÿ12 1 10ÿ12 3 10ÿ12 3 10ÿ13 1 10ÿ12
153
Kevlar PROPERTY
UNITS
Arrhenius activation energy for permeability coef®cient EP
cm2 sÿ1
Diffusion coef®cient
Gas
H2 He CO2 O2 N2
kcal mol
CONDITIONS ÿ1
VALUE
Carbon dioxide Amorphous Kevlar/Nomex copolymer Kevlar 49 H2 SO4 cast ®lm Annealed 1008C, 2 h Annealed 2008C, 2 h Annealed 3008C, 2 h
5.6 6.3 5.9
Water into Kevlar 29 ®ber Kevlar 29 H2 SO4 ®lm
0:95 10ÿ12 (See table below)
Kevlar 49 ®lm, annealed 2 h at
(25)
5.5
1008C
2008C
3008C
Amorphous Kevlar/Nomex copolymer
200 800 0.4 0.81 0.18
200 800 0.42 1.10 0.22
200 800 0.2 0.62 Ð
Ð Ð Ð 9.26 Ð
(36) (25)
Values given in cm2 sÿ1 (1010 )
PROPERTY
UNITS
CONDITIONS
Temperature dependence of diffusion coef®cient D
cm2 sÿ1
Linear (Arrhenius) Relationship for H2 and CO2 Amorphous Kevlar/Nomex copolymer 258C 658C Kevlar 49 H2 SO4 cast ®lm Annealed 1008C, 2 h 258C 658C Annealed 2008C, 2 h 258C 658C Annealed 3008C, 2 h 258C 658C
Arrhenius activation energy for diffusion coef®ent ED
154
REFERENCE
kcal molÿ1
Carbon dioxide Amorphous Kevlar/Nomex copolymer Kevlar 49 H2 SO4 cast ®lm Annealed 1008C, 2 h Annealed 2008C, 2 h Annealed 3008C, 3 h
VALUE
REFERENCE
(25)
2 10ÿ10 1:62 10ÿ9 2 10ÿ11 1 10ÿ10 2:2 10ÿ11 1:3 10ÿ10 8 10ÿ12 5 10ÿ11 10.5
Ð
9.2 9.4 10.1
Polymer Data Handbook. Copyright # 1999 by Oxford University Press, Inc. All rights reserved.
Kevlar PROPERTY
Heat of sorption Hs
UNITS
kcal mol
CONDITIONS ÿ1
Carbon dioxide Amorphous Kevlar/Nomex copolymer Kevlar 49 H2 SO4 cast ®lm Annealed 1008C, 2 h Annealed 2008C, 2 h Annealed 3008C, 2 h
VALUE
ÿ5.0
REFERENCE
(25)
ÿ3.6 ÿ3.1 ÿ4.2
Thermal conductivity
W mÿ1 Kÿ1 W mÿ1 Kÿ2 W mÿ1 Kÿ1
Phonon propagation in Kevlar 49 5±250 K Axial thermal conductivity, 125±250 K
10 dK=d