Polymer Brushes Synthesis, Characterization, Applications
Edited by Rigoberto C. Advincula, William J. Brittain, Kenne...
193 downloads
2397 Views
16MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Polymer Brushes Synthesis, Characterization, Applications
Edited by Rigoberto C. Advincula, William J. Brittain, Kenneth C. Caster, Jrgen Rhe
Polymer Brushes Edited by Rigoberto C. Advincula, William J. Brittain, Kenneth C. Caster, Jrgen Rhe
Related Titles: P. Ayajan, L. S. Schadler, P. V. Braun
Nanocomposite Science and Technology 2003 ISBN: 3-527-30359-6
G. Decher, J. B. Schlenoff (Eds.)
Multilayer Thin Filmes Sequential Assembly of Nanocomposite Materials 2003 ISBN: 3-527-30440-1
P. Go´mez-Romero, C. Sanchez (Eds.)
Functional Hybrid Materials 2003 ISBN: 3-527-30484-3
F. Caruso (Ed.)
Colloids and Colloid Assemblies Synthesis, Modification, Organization and Utilization of Colloid Particles 2004 ISBN: 3-527-30660-9
W. Krenkel (Ed.)
High Temperature Ceramic Matrix Composites 2001 ISBN: 3-527-30320-0
I. Manners
Synthetic Metal-containing Polymers 2003 ISBN: 3-527-29463-5
Polymer Brushes Synthesis, Characterization, Applications
Edited by Rigoberto C. Advincula, William J. Brittain, Kenneth C. Caster, Jrgen Rhe
Editors Rigoberto C. Advincula Department of Chemistry University of Houston 136 Fleming Building Houston, TX 77204 USA William J. Brittain Department of Polymer Science University of Akron Akron, OH 44325-3909 USA Kenneth C. Caster Center for Biologically Inspired Materials and Material Systems Pratt School of Engineering Box 90303 Duke University Durham, NC, 27708 USA Jrgen Rhe Institute for Microsystem Technology (IMTEK) University of Freiburg Georges-K@hler-Allee 103 79110 Freiburg Germany
&
All books published by Wiley-VCH are carefully produced. Nevertheless, authors, editors, and publisher do not warrant the information contained in these books, including this book, to be free of errors. Readers are advised to keep in mind that statements, data, illustrations, procedural details or other items may inadvertently be inaccurate. Library of Congress Card No. applied for British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library. Bibliographic information published by Die Deutsche Bibliothek Die Deutsche Bibliothek lists this publication in the Deutsche Nationalbibliografie; detailed bibliographic data is available in the Internet at . 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim All rights reserved (including those of translation into other languages). No part of this book may be reproduced in any form – by photoprinting, microfilm, or any other means – nor transmitted or translated into machine language without written permission from the publishers. Registered names, trademarks, etc. used in this book, even when not specifically marked as such, are not to be considered unprotected by law.
Printed in the Federal Republic of Germany. Printed on acid-free paper. Typesetting K+hn & Weyh, Satz und Medien, Freiburg Printing betz-druck GmbH, Darmstadt Bookbinding Großbuchbinderei J. Sch4ffer GmbH & Co. KG, Gr+nstadt ISBN
3-527-31033-9
V
Contents Preface
XV
List of Contributors
XVII
Polymer Brushes: On the Way to Tailor-Made Surfaces 1 Jrgen Rhe 1 Growth of Polymer Molecules at Surfaces: Introductory Remarks 2 Coatings: From First Principles to High-Tech Applications 3 3 Surface-Coating Techniques 6 4 Surface-Attached Polymers 10 5 Polymer Brushes: General Features 13 6 Theory of Polymer Brushes 15 7 Synthesis of Polymer Brushes 18 8 Polymer Brushes as Functional Materials 22 9 Microstructured Polymer Brushes 24 10 Surface-Initiated Polymerization: The Overall Picture 28
Part I
Synthesis
1
Recent Advances in Polymer Brush Synthesis Anthony M. Granville and William J. Brittain Introduction 35 “Grafting To” Synthesis Technique 37 “Grafting From” Synthesis Technique 41
1.1 1.2 1.3 2
2.1 2.2 2.2.1 2.2.2 2.2.3
1
33 35
Polymer Brushes by Atom Transfer Radical Polymerization Jeffrey Pyun, Tomasz Kowalewski, and Krzysztof Matyjaszewski Introduction 51 Polymer Brushes on Flat Surfaces 52 Controlled ATRP from Flat Surfaces 53 Block Copolymer Brushes on Flat Surfaces 54
51
Stimuli-Responsive Ultrathin Films from “Grafting To” Approach
55
VI
Contents
2.3 2.3.1 2.3.2 2.3.3 2.3.4 2.4 2.4.1 2.4.2
Polymer Brushes from Particles 57 Spherical Brushes from Inorganic Colloids 58 Multilayered Core-Shell Colloids 58 Imaging of Individual Spherical Brushes 61 Modification of Carbon Black Fillers 63 Molecular Brushes 63 Synthesis of Molecular Brushes from Linear Polymeric Macroinitiators 64 Molecular Brushes from Dendritic Macroinitiators 65
3
Polymer Brushes by Atom Transfer Radical Polymerization Initiated from Macroinitiator Synthesized on the Surface 69 Viktor Klep, Bogdan Zdyrko, Yong Liu, and Igor Luzinov Introduction 69 Experimental 72 Results and Discussion 73 Synthesis of Macroinitiator for ATRP 73 ATRP from Macroinitiator 77
3.1 3.2 3.3 3.3.1 3.3.2 4
4.1 4.2 4.3 4.3.1 4.3.2 4.3.3 4.4 4.4.1 4.4.2 5
5.1 5.2 5.3 5.4 5.4.1 5.4.2 5.4.3 5.4.4
Synthesis of Polypeptide Brushes Henning Menzel and Peter Witte Introduction 87
87
Preparation of Peptide Brushes by “Grafting To” 88 Preparation of Peptide Brushes by Grafting From Polymerization 90 Mechanisms of NCA Polymerization 90 Amine-Initiated Grafting From Polymerizations in Solution 93 Other Techniques for Amine-Initiated Grafting From Polymerizations Preparation of Peptide Brushes by Living Grafting From Polymerization 95 Copolymerization Approach 95 Alloc-Amide Approach 99 Bottle Brush Brushes: Ring-Opening Polymerization of Lactide from Poly(hydroxyethyl methacrylate) Surfaces 105 Jong-Bum Kim, Wenxi Huang, Chun Wang, Merlin Bruening, and Gregory L. Baker Introduction 105 Synthesis of PHEMA-g-PLA 109 Conclusions and Implications for Future Studies 114 Experimental Section 115 Materials 115 Preparation of Monomer Solution and Substrates 115 Ring-Opening Polymerization from PHEMA Surface 115 Analytical Methods 115
94
Contents
6
6.1 6.2 6.2.1 6.2.2 6.2.3 6.3 6.3.1 6.3.2
7
7.1 7.2 7.2.1 7.2.2 7.2.3 7.3 7.3.1 7.3.2 7.3.3 7.4 7.4.1 7.4.2 7.4.3 7.5 7.6 7.6.1 7.6.2 7.6.3 7.6.4 7.6.5 7.6.6 7.6.7
Preparation of Well-Defined Organic-Inorganic Hybrid Nanostructures using Living Cationic Surface-Initiated Polymerization from Silica Nanoparticles 119 Il-Jin Kim, Su Chen, and Rudolf Faust Introduction 119 Experimental Section 120 Materials 120 Characterization 120 Synthesis of Immobilized Macroinitiators 121 Results and Discussion 122
Living Cationic Surface-Initiated Polymerization of IB from Silica Nanoparticles in the Presence of Sacrificial Free Initiator 122 Living Cationic Surface-Initiated Polymerization of IB from Silica Macroinitiators 125 Photoinitiated Polymerization from Self-Assembled Monolayers 129 Daniel J. Dyer, Jianxin Feng, Charles Fivelson, Rituparna Paul, Rolf Schmidt, and Tongfeng Zhao Introduction 129 Substrates 131 Silicon, Silica and Glass 131 Planar Gold 131 Nanoparticles 133 Photoinitiated Radical Polymerization Mechanisms 133 Free Radicals 133 Photosensitizers 134 Photo-Iniferters 135 Polymerization from AIBN-type SAMs 135 Design and Synthesis 135 Monolayer Characterization 137 Polymerization of Styrene 138 Conclusions and Future Studies 143 Experimental 144 Initiator Synthesis 144 Polymerizations 145
Reflection Absorption Infrared Spectroscopy (FT-RAIRS) Measurements 146 Ellipsometry 146 X-Ray Photoelectron Spectroscopy (XPS) 146 Molecular Weight Measurements 147 Molecular Modeling 147
VII
VIII
Contents
8
8.1 8.2 8.2.1 8.3 8.3.1 8.3.2 8.4 8.4.1 9
9.1 9.2 9.2.1 9.2.2 9.3 9.3.1 9.3.2 9.4 9.4.1
Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes 151 Stephen G. Boyes, Anthony M. Granville, Marina Baum, Bulent Akgun, Brian K. Mirous, and William J. Brittain Introduction and Background 151 Controlled/“Living” Free Radical Polymerization 153 Atom Transfer Radical Polymerization (ATRP) 153 Synthesis of Block Copolymer Brushes 154 Diblock Copolymer Brushes 154 Triblock Copolymer Brushes 158 Rearrangement of Block Copolymer Brushes 160 Rearrangement of Diblock Copolymer Brushes 160 Surface-Grafted Hyperbranched Polymers Hideharu Mori and Axel H. E. Mller Introduction 167 “Grafting To” Approach 170
167
9.4.3 9.4.4
Synthesis of 2D Hybrids by “Grafting To” 170 Synthesis of 3D Hybrids by “Grafting To” 171 Multi-Step Grafting Approach 172 “Grafting To-Grafts” 172 “Grafting From-Grafts” 173 “Grafting From” Approach 173 Synthesis of 2D Hybrids by Surface-Initiated, Self-Condensing Vinyl (Co)polymerization 175 Synthesis of 3D Hybrids by Surface-Initiated Self-Condensing Vinyl (Co)polymerization 178 Theoretical Considerations 181 Other Systems 182
Part II
Characterization
9.4.2
187
10
The Analysis and Characterization of Polymer Brushes: From Flat Surfaces to Nanoparticles 189 Rigoberto C. Advincula 10.1 Introduction 190 10.1.1 Polymer Brushes 190 10.1.2 SIP on Flat Surfaces and Particle Substrates 192 10.2 Characterization of Ultrathin Polymer Films and Polymer Brushes 10.2.1 Spectroscopy and Optical Techniques 194 10.2.2 Microscopy 195 10.2.3 Other Methods 196 10.3 Investigating Polymer Brush Systems 198 10.3.1 Characterization of the Step-by-Step Procedure 198
193
Contents
10.3.2 Investigating the Different Regimes of Polymer Brush Conformation on Surfaces 199 10.3.3 Investigating Phase Segregation and Formation of Patterns 200 10.3.4 Polymerization Mechanism 201 10.3.5 Patterning Using Nonlithographic Methods 204 10.4 The Importance of Characterizing Particles and Nanoparticles 204 10.5 Characterization and Analysis Methods for Polymer Brushes on Particles 205 10.5.1 In-Situ Investigations on Particles 206 10.5.2 Degrafted Polymers from Particles 208 11
11.1 11.2 11.2.1 11.2.2 11.2.3 11.2.4 11.2.5 11.2.6 11.2.7 11.2.8 11.2.9 11.2.10 11.2.11 11.2.12 11.3 12
Characterization of Polymer Brushes on Nanoparticle Surfaces 213 Thomas A. P. Seery, Mark Jordi, Rosette Guino, and Dale Huber Introduction 213 Experimental 215 Materials 215 Instrumentation 215 Pyrolysis GC-MS 216 Infrared Monitoring of Polymer Formation 216 Synthesis of Alkanethiol-Stabilized Gold Nanoparticles 217 Synthesis of Stober Silica Nanoparticles 218 Synthesis of NCSEOS 218
Synthesis of BCH, NCSEOS, and TMEOS-Coated Nanoparticles Synthesis of TMEOS Silica-Polymer Mixture 219 Synthesis of Silica-Poly(norbornene) Nanocomposites 219 Isolation of Grafted Polymer Chains 220 Polymer Stability Test 220 Results and Discussion 221 Spherical Polyelectrolyte Brushes Matthias Ballauff Introduction 231
231
12.1 12.2 Synthesis and Characterization 234 12.2.1 Determination of Core Radius R, Contour Length LC, and Grafting Density r 234 12.2.2 Titration Curve 235 12.3 Experimental Verification of Theoretical Predictions 236 12.3.1 Confinement of the Counterions 237 12.3.2 Correlation of the Counterions to the Macroion 238 12.4 Flow Behavior 240 12.5 Applications 242 12.5.1 Interaction with Charged Surfaces 242 12.5.2 Interaction with Proteins in Solution 243
218
IX
X
Contents
13
Weak Polyelectrolyte Brushes: Complex Formation and Multilayer Build-up with Oppositely Charged Polyelectrolytes 249 Rupert Konradi, Haining Zhang, Markus Biesalski, and Jrgen Rhe 13.1 Introduction 249 13.2 Synthesis and Data Evaluation 251 13.2.1 Synthesis 251 13.2.2 Multiple-Angle Nulling Ellipsometry 252 13.3 Swelling Behavior of Weak Polyelectrolyte Brushes in Aqueous Environments 253 13.3.1 The Influence of pH Value 254 13.3.2 Interaction with Monovalent Cations 254 13.3.3 Interaction with Divalent Cations 257 13.3.4 Interaction with a Trivalent Cation: Aluminum 263 13.3.5 A Classification 264 13.4 Interaction Between Polyelectrolyte Brushes and Oppositely Charged Polyelectrolytes in Solution 265 13.4.1 The Formation of Surface-Attached PEL-PEL Complexes 265 13.4.2 The Formation of PEL Multilayer Assemblies 268 14
Structure and Properties of High-Density Polymer Brushes 273 Yoshinobu Tsujii, Muhammad Ejaz, Shinpei Yamamoto, Kohji Ohno, Kenji Urayama, and Takeshi Fukuda 14.1 Introduction 273 14.2 Controlled Synthesis of High-Density Polymer Brush by ATRP 274 14.3 Structure and Properties of High-Density PMMA Brushes 277 14.3.1 Swollen Brushes 277 14.3.2 Dry Brushes 279 14.4 Application of High-Density Polymer Brushes 282 15
15.1 15.2 15.2.1 15.2.2 15.2.3 15.3 15.4 15.5 15.5.1 15.5.2 15.5.3 15.5.4
Behavior of Surface-Anchored Poly(acrylic acid) Brushes with Grafting Density Gradients on Solid Substrates 287 Tao Wu, Jan Genzer, Peng Gong, Igal Szleifer, Petr Vlcˇek, and Vladim6r 7ubr Glossary 287 Introduction 288 Experimental Section 292 Formation of the Gradient of the Polymerization Initiator 292 Preparation of PtBA and Hydrolysis into PAA 293 Polymer Characterization 294 Theory Section 296 Experimental Results 300 Discussion 304 Surface Hydrolysis of PtBA 304 Dependence of H on Ionic Strength 306 Dependence of H on the PAA Grafting Density 308 Molecular Insight from Calculations 310
Contents
16
Kinetics of Polymer Brush Formation With and Without Segmental Adsorption 317 Lynn S. Penn, Heqing Huang, Roderic P. Quirk, and Tae H. Cheong Introduction 317 Experimental 320
16.1 16.2 16.2.1 Synthesis and Characterization of Amine Chain-End Functionalized Polystyrene 320 16.2.2 Introduction of Active Sites to Surface of Solid 320 16.2.3 Tethering Reactions in Good Solvent 320 16.2.4 Tethering Reactions in Poor Solvent 321 16.2.5 Monitoring the Tethering Reactions 321 16.3 Results and Discussion 323 16.3.1 Results in Absence of Segmental Adsorption 323 16.3.2 Results in the Presence of Segmental Adsorption 325
Part III Applications 17
17.1 17.2 17.2.1 17.2.2 17.2.3 17.3 17.3.1 17.3.2 17.3.3 17.3.4 17.3.5 17.3.6 17.3.7 17.3.8 17.3.9 17.4
18
329
Applications of Polymer Brushes and Other Surface-Attached Polymers 331 Kenneth C. Caster Introduction 331 Surface Modification and Functionalization 332 Polymerization Methodologies for Surface-Attached Polymers 332 Property Control 336 Impact on Types of Materials 336 Applications 336 Adhesion 337 Tribology 341 Stabilization and Compatiblization 341 Surface Coatings 343 Stimuli-Responsive and Switchable Surfaces 345 Separations 346 Nanofabrication 349 Surfaces for Electronics 350 Other Uses 351 Future Prospects 351 Appendix 353 Polymer Brushes: Towards Applications 371 Gregory L. Whiting, Tamer Farhan, and Wilhelm T. S. Huck Introduction 371 Experimental 372 Materials 372 Characterization 373
18.1 18.2 18.2.1 18.2.2 18.2.3 Synthesis of Triphenylamine Acrylate (TPAA) Monomer
373
XI
XII
Contents
18.2.4 18.2.5 18.3 18.3.1 18.3.2 18.3.3
Synthesis and Deposition of Trichlorosilane ATRP Initiator 373 Surface-Initiated Polymerizations 373 Results and Discussion 374 Kinetics of Surface-Initiated ATRP of MMA from Silicon 374 Surface-Initiated ATRP from Polymeric Substrates 375 Synthesis of Conjugated Polymer Brushes from ITO 377
19
Polymerization, Nanopatterning and Characterization of Surface-Confined, Stimulus-Responsive Polymer Brushes 381 Marian Kaholek, Woo-Kyung Lee, Bruce LaMattina, Kenneth C. Caster, and Stefan Zauscher Introduction 381 Experimental 382 Materials 382 Substrates 383 Preparation of Initiator Monolayers 383 Nanopatterning of Initiator 383 NIPAAM Polymerization 384 Polymer Characterization 385 Results and Discussion 386 Surface-Initiated Bulk Polymerization 386 Phase Behavior and Mechanical Characterization 390 Surface Force Measurements 393 Nano-Patterning 396
19.1 19.2 19.2.1 19.2.2 19.2.3 19.2.4 19.2.5 19.2.6 19.3 19.3.1 19.3.2 19.3.3 19.3.4 20
Mixed Polymer Brushes: Switching of Surface Behavior and Chemical Patterning at the Nanoscale 403 Sergiy Minko, Marcus Mller, Valeriy Luchnikov, Mikhail Motornov, Denys Usov, Leonid Ionov, and Manfred Stamm 20.1 Introduction 403 20.2 Theory of Mixed Polymer Brushes 404 20.3 Synthesis of Mixed Brushes 409 20.3.1 The “Grafting To” Method 409 20.3.2 The “Grafting From” Method 411 20.4 Experimental Study of Phase Segregation in Mixed Brushes 412 20.5 Adaptive Responsive Behavior: Regulation of Wetting and Adhesion 417 20.6 Patterning of Mixed Brushes 420 21
21.1 21.1.1 21.1.2 21.1.3
Local Chain Organization of Switchable Binary Polymer Brushes in Selective Solvents 427 Melbs C. LeMieux, Denys Usov, Sergiy Minko, Manfred Stamm, and Vladimir V. Tsukruk Introduction 427 Polymer Surface Modification 427 Polymer Brushes 428 Binary Polymer Brushes 429
Contents
21.2 21.2.1 21.2.2 21.3 21.3.1 21.3.2 21.3.3
Experimental 431 Materials and Synthesis 431 Methods 432 Results and Discussion 433 Dry State Analysis 433 Morphology in Solvent 434 Mechanical Response in Solvent
22
Motion of Nano-Objects Induced by a Switchable Polymer Carpet 441 Svetlana Prokhorova, Alexey Kopyshev, Ayothi Ramakrishnan, and Jrgen Rhe Introduction 441 Materials 443 Results and Discussion 444
22.1 22.2 22.3 23
437
Photochemical Strategies for the Preparation and Microstructuring of Densely Grafted Polymer Brushes on Planar Surfaces 449 Oswald Prucker, Rupert Konradi, Martin Schimmel, J:rg Habicht, In-Jun Park, and Jrgen Rhe 23.1 Introduction 449 23.1.1 Topological and Chemical Patterning of Surfaces 449 23.1.2 Photochemical Pathways for Grafting Polymers onto Surfaces: A Literature Survey 451 23.2 General Features of Surface-Initiated Polymerization from Monolayers of Azo Initiators 453 23.3 Photolithographic Procedures for the Generation of Microstructured Polymer Brushes on Planar Surfaces 455 23.3.1 Photoablation of Polymer Brushes 455 23.3.2 Photoablation/Photodecomposition of the Initiator Layer followed by Thermal Polymerization 460 23.3.3 Patterning by Photopolymerization 462 23.4 Multifunctional Patterns 465 23.5 Applications of Photostructured Polymer Brushes 466 Index
471
XIII
XV
Preface Amongst others, notably industrial coatings, barriers, packaging, laminates, and lubricants, have been associated with the modification of the surface of an object so as to have a specific interaction or non-interaction towards an external environment. These terms have mostly implied the use of organic polymer, surfactant, and resin type materials. While a large body of academic and technical literature associated with bulk films and coatings already exists, development of ultra thin coatings of the sub-micron order has recently become of great interest, spanning a new field of surface engineers in the last decade. In the area of organic and polymer thin films, one may be familiar with the more common industrial techniques like spin-coating, dipcoating, doctor blade coating, and roll-to-roll coating processes. At the few nm thickness regimes, the application of both self-assembly and directed-assembly methods becomes fascinating. Some of the more “nanostructured” assemblies include: Langmuir-Blodgett films, self-assembled monolayers (multilayers), alternate polyelectrolyte (sequential) deposition, and thermal and molecular beam epitaxy methods of evaporated organic molecules. To these examples, one can now add the method of thin films by polymer brushes. The study of polymer brushes has long been dominated by physicists because of their interest in investigating macromolecule phenomena in confined environments. From the theoretical standpoint, end-tethering of polymers reduces the degrees of freedom for different macromolecule conformations such that it is possible to define a “stretch” conformation for a neutral polymer. From the experimental side numerous innovative surface sensitive spectroscopic and microscopic methods have been developed and applied as a result of this interest. Grafting density, surface concentration, osmotic pressure, solvent quality, interaction parameters, etc. are important factors to consider in experimental methods. Due to the predominance of “physisorption” models in the formation of these confined polymers, not much focus has been given yet on chemically grafted polymers, which are more thermodynamically robust. For a while, chemisorption methods were popular, but very soon, it was realized that significantly higher grafting densities are not achievable with this method. In the area of polymer grafting, a lot of previous work can be cited on particle modification and the use of plasma or irradiation initiated polymerizations. With the recent advances in polymer synthetic methodologies and their adaptation to surface chemistry, it has become possible for synthetic chemists to reclaim
XVI
Preface
this field. The contribution of late is evident. In a technique called “grafting from”, a highly cited term from the first papers by R?he and Pr?cker, it is possible to associate the formation of polymer brushes as a type of surface initiated polymerization. Contributions to this field are numerous and we have tried to include in this book the works by Brittain, Huck, Menzel, Fukuda, Matyjaszewski, Bruening, Minko, Stamm, M?ller, Luzinov, Dyer, Advincula, Seery, Quirk, Stamm, Tsukruk, Zauscher, Boyes, Baker, Ballauf, Caster, Genzer, Faust, their co-authors and many others (see list of contributors). However, this field is growing and is indeed very interdisciplinary. The book starts with an introduction and overview of the field by R?he. The subsequent chapters are then grouped into three major parts: Synthesis, Characterization, and Applications. Each division begins with a review chapter by the editors. This is followed by individual contributions and reviews from invited authors. In Synthesis, an overview in Chapter 1 gives the highlights of recent advances in synthetic methodologies. Efforts have been made to include living free-radical polymerization (Chapters 2 and 3), ring-opening polymerizations (Chapter 4 and 5), cationic polymerization (Chapter 6), and hyper branched polymer synthesis (Chapter 9). Other polymerization mechanisms are reviewed in Chapter 1. In Characterization, it was helpful to outline the different methods for polymer brush analysis on both flat film substrates and particles (Chapter 10). The characterization of particles and flat surfaces is exemplified in Chapters 11, 12 and Chapters 13, 14, 15, 16, respectively. Lastly in the application part, the review in Chapter 17 gives an excellent overview of the myriads of possibilities in applications of polymer brushes: from microelectronics to bio-applications. The contributions include patterning (Chapter 18, 19), mixed polymer brushes (Chapter 20, 21), nano-object movement (Chapter 22), and photochemical strategies in applications (Chapter 23). More chapters could have been included but this collection should well suffice to whet the appetite of the readers. A number of reviews have been written but this work should be the most comprehensive yet. It is hoped that this book will be a valuable reference and resource to scientists, engineers, and technologists in this rapidly evolving field. June 2004
Rigoberto C. Advincula, Houston William J. Brittain, Akon Kenneth C. Caster, Durham Jrgen Rhe, Freiburg
XVII
List of Contributors Rigoberto C. Advincula Department of Chemistry and Center for Materials Chemistry University of Houston Houston, TX 77204-5003 USA
Markus Biesalski Institute for Microsystems Technology University of Freiburg Georges-K2hler-Allee 103 79110 Freiburg Germany
Bulent Akgun Department of Polymer Science University of Akron Akron, OH 44325-3909 USA
Stephen G. Boyes Department of Polymer Science University of Akron Akron, OH 44325-3909 USA
Gregory L. Baker Department of Chemistry and Center for Sensor Materials Michigan State University East Lansing, MI 48824 USA
William J. Brittain Department of Polymer Science University of Akron 170 University Ave. Akron, OH 44325 USA
Matthias Ballauff Physikalische Chemie I University of Bayreuth 95440 Bayreuth Germany
Merlin Bruening Department of Chemistry and Center for Sensor Materials Michigan State University East Lansing, MI 48824 USA
Marina Baum Department of Polymer Science University of Akron Akron, OH 44325-3909 USA
XVIII
List of Contributors
Kenneth C. Caster Center for Biologically Inspired Materials and Material Systems Pratt School of Engineering Box 90303 Duke University, Durham, NC 27708 USA Su Chen Department of Chemistry University of Massachusetts Lowell One University Avenue Lowell, MA 01854 USA Tae H. Cheong Department of Polymer Science University of Akron Akron, OH 44325-3909 USA Daniel J. Dyer Department of Chemistry & Biochemistry Southern Illinois University Carbondale, IL 62901-4409 USA Muhammad Ejaz Institute for Chemical Research Kyoto University Uji, Kyoto 611-0011 Japan Tamer Farhan Melville Laboratory for Polymer Synthesis Department of Chemistry University of Cambridge Lensfield Road Cambridge, CB2 1EW UK
Rudolf Faust Department of Chemistry University of Massachusetts Lowell One University Avenue Lowell, MA 01854 USA Jianxin Feng Department of Chemistry & Biochemistry Southern Illinois University Carbondale, IL 62901-4409 USA Charles Fivelson Department of Chemistry & Biochemistry Southern Illinois University Carbondale, IL 62901-4409 USA Takeshi Fukuda Institute for Chemical Research Kyoto University Uji, Kyoto 611-0011 Japan Jan Genzer Department of Chemical Engineering North Carolina State University Riddick Laboratories PO Box 7905 Raleigh, NC 27695-7905 USA Peng Gong Department of Chemistry Purdue University West Lafayette, IN 47907-1393 USA
List of Contributors
Anthony M. Granville Department of Polymer Science University of Akron 170 University Ave. Akron, OH 44325 USA Rosette Guino Department of Chemistry and Polymer Program University of Connecticut Storrs, CT 06269 USA J+rg Habicht Institute for Microsystem Technology (IMTEK) University of Freiburg Georges-K2hler-Allee 103 79110 Freiburg Germany Heqing Huang Department of Chemical and Materials Engineering University of Kentucky Lexington, KY 40506-0046 USA Wenxi Huang Department of Chemistry and Center for Sensor Materials Michigan State University East Lansing, MI 48824 USA Dale Huber Sandia National Laboratories Nanostructures & Advanced Materials Chemistry Dept. P.O. Box 5800 MS 1421 Albuquerque, NM 87185-1421 USA
Wilhelm T. S. Huck Melville Laboratory for Polymer Synthesis Department of Chemistry University of Cambridge Lensfield Road Cambridge, CB2 1EW UK Leonid Ionov Institut fEr Polymerforschung Dresden Hohe Str. 6 01069 Dresden Germany Mark Jordi Department of Chemistry and Polymer Program University of Connecticut Storrs, CT 06269 USA Marian Kaholek Department of Mechanical Engineering and Materials Science School of Engineering Duke University Box 90300 Durham, NC 27708-300 USA Il-Jin Kim Department of Chemistry University of Massachusetts Lowell One University Avenue Lowell, MA 01854 USA Jong-Bum Kim Department of Chemistry and Center for Sensor Materials Michigan State University East Lansing, MI 48824 USA
XIX
XX
List of Contributors
Viktor Klep School of Materials Science and Engineering Clemson University Clemson, SC 29634 USA
Melbs C. LeMieux Materials Science & Engineering Department Iowa State University Ames, IA 50011 USA
Rupert Konradi Institute for Microsystem Technology (IMTEK) University of Freiburg Georges-K2hler-Allee 103 79110 Freiburg Germany
Yong Liu School of Materials Science and Engineering Clemson University Clemson, SC 29634 USA
Alexey Kopyshev Freiburger Materialforschungszentrum (FMF) University of Freiburg Stefan-Meier-Str. 21 79104 Freiburg Germany Tomasz Kowalewski Department of Chemistry Carnegie Mellon University 4400 Fifth Avenue Pittsburgh, PA 15213 USA Bruce LaMattina Army Research Office PO Box 12211 Research Triangle Park NC 27709-2211 USA Woo-Kyung Lee Department of Mechanical Engineering and Materials Science School of Engineering Duke University Box 90300 Durham, NC 27708-300 USA
Valeriy Luchnikov Institut fEr Polymerforschung Dresden Hohe Str. 6 01069 Dresden Germany Igor Luzinov School of Materials Science and Engineering 161 Sirrine Hall Clemson University Clemson, SC 29634-097 USA Krzysztof Matyjaszewski Department of Chemistry Carnegie Mellon University 4400 Fifth Avenue Pittsburgh, PA 15213 USA Henning Menzel Institute for Technical Chemistry Technical University Braunschweig Hans-Sommer-Str. 10 38106 Braunschweig Germany
List of Contributors
Sergiy Minko Department of Chemistry Clarkson University Potsdam, NY 13699-5810 USA Brian K. Mirous Department of Polymer Science University of Akron Akron, OH 44325-3909 USA Hideharu Mori Makromolekulare Chemie II UniversitGt Bayreuth UniversitGtsstrasse 30 95440 Bayreuth Germany Mikhail Motornov Institut fEr Polymerforschung Dresden Hohe Str. 6 01069 Dresden Germany Axel H. E. M2ller Makromolekulare Chemie II UniversitGt Bayreuth UniversitGtsstrasse 30 95440 Bayreuth Germany
In-Jun Park Institute for Microsystem Technology (IMTEK) University of Freiburg Georges-K2hler-Allee 103 79110 Freiburg Germany Rituparna Paul Department of Chemistry & Biochemistry Southern Illinois University Carbondale, IL 62901-4409 USA Lynn S. Penn Dept. Chemical and Materials Engineering 177 Anderson Hall University of Kentucky Lexington, KY 40506-0046 USA Svetlana Prokhorova Freiburger Materialforschungszentrum (FMF) University of Freiburg Stefan-Meier-Str. 21 79104 Freiburg Germany
Marcus M2ller Institut fEr Physik WA 331 Johannes Gutenberg UniversitGt 55099 Mainz Germany
Oswald Prucker Institute for Microsystem Technology (IMTEK) University of Freiburg Georges-K2hler-Allee 103 79110 Freiburg Germany
Kohji Ohno Institute for Chemical Research Kyoto University Uji, Kyoto 611-0011 Japan
Jeffrey Pyun University of California Department of Chemistry Berkeley, CA 94720-1460 USA
XXI
XXII
List of Contributors
Roderic P. Quirk Department of Polymer Science University of Akron Akron, OH 44325-3909 USA
Manfred Stamm Institut fEr Polymerforschung Dresden Hohe Str. 6 01069 Dresden Germany
Ayothi Ramakrishnan Indian Institute of Technology Madras Chennai 600 036 India
Vladim5r 6ubr Department of Biomedicinal Polymers Institute of Macromolecular Chemistry Academy of Sciences of the Czech Republic 162 06 Prague Czech Republic
J2rgen R2he Institute for Microsystem Technology (IMTEK) University of Freiburg Georges-K2hler-Allee 103 79110 Freiburg Germany Martin Schimmel Institute for Microsystem Technology (IMTEK) University of Freiburg Georges-K2hler-Allee 103 79110 Freiburg Germany Rolf Schmidt Department of Chemistry & Biochemistry Southern Illinois University Carbondale, IL 62901-4409 USA Thomas A. P. Seery Department of Chemistry and Polymer Program University of Connecticut Storrs, CT 06269 USA
Igal Szleifer Department of Chemistry Purdue University West Lafayette, IN 47907-1393 USA Yoshinobu Tsujii Institute for Chemical Research Kyoto University Uji, Kyoto 611-0011 Japan Vladimir V. Tsukruk Materials Science & Engineering 3053 Gilman Hall Iowa State University Ames, IA 50011 USA Kenji Urayama Institute for Chemical Research Kyoto University Uji, Kyoto 611-0011 Japan Denys Usov Institut fEr Polymerforschung Dresden Hohe Strasse 6 01069 Dresden Germany
1
Polymer Brushes: On the Way to Tailor-Made Surfaces Jrgen Rhe
Abstract
In recent years, the synthesis of polymer brushes through surface-initiated polymerization reactions has received significant attention. In this overview, several different synthetic strategies for the generation of polymer brushes are reviewed. The unique physical properties of polymer brushes that arise from the covalent anchoring of the polymer chains to the solid substrate are discussed and compared to the properties of polymer layers deposited by other techniques of thin film generation. Finally, examples are provided that highlight some recent developments aimed at strategies for the functionalization of surfaces with polymer brushes, at ways of realizing smart surfaces with switchable properties, and at the generation of micro- and nanostructured polymer monolayers.
1
Growth of Polymer Molecules at Surfaces: Introductory Remarks
Thin coatings applied to the surface of materials can improve the properties of objects dramatically as they allow control of the interaction of a material with its environment. This has been known more or less empirically to man for several thousand years. Lacquer generated from tree sap was used in China some 7000 years ago as a protective coating for wooden objects. Cold process coatings were also used around 3000 bc, where Egyptian ship builders used beeswax, gelatin and clay to produce varnishes and enamels and (later) coatings from pitch and balsam to waterproof their ships. The early Greeks and Romans, as well as the ancient Asian cultures in China, Japan and Korea, used lacquers and varnishes applied to homes and ships for decoration and as protective measures against adverse environmental conditions. In modern times, the coatings industry is a multi-billion dollar business and – especially if the value of the protected objects is considered – a very important contribution to the world economy. Today, however, the application range of coatings extends much beyond the simple decoration and protection aspects, and functional coatings have become an enabling technology in a vast variety of different high-tech
2
Polymer Brushes: On the Way to Tailor-Made Surfaces
Schematic depiction of the growth of polymer molecules at a surface of a solid substrate through surface-initiated polymerization.
Figure 1
areas. Fields in which such high-tech coatings are applied range from computer chips [1] and hard disk manufacturing [2] to the use of special coatings in biomedical and aviation applications [3,4]. Accordingly, many different techniques have been developed for the generation of protective coatings, and these will be discussed further below. Surface-initiated polymerization reactions as a new pathway for the preparation of functional, high-tech coatings have recently received much attention [5,6]. This technique is based on the growth of polymer molecules at the surface of a substrate in situ from surface-bound initiators, which results in the attachment of polymer molecules through covalent bonds to this substrate (Figure 1). Polymer layers in which the polymer chains are irreversibly attached to the substrate are especially attractive for a variety of applications, as such layers can have a good long-term stability, even in rather adverse environments. For example, it poses no problem to expose surfaces with such surface-attached coatings to good solvents for the polymers without being concerned that the polymer will be either dissolved or displaced, and that the coating is more or less rapidly removed from the surface. In addition to the issue of stability, the number of functional groups present at a surface can also be greatly enhanced by connecting large polymer molecules with functional groups to the surface instead of binding the functional groups directly to that surface. Such a “skyscraper” approach allows high densities of functional groups to be obtained at the surface of the substrate through moving from the strictly two-dimensional arrangement of these groups present in typical surfaces to a more three-dimensional situation. An example, which illustrates such a behavior is the attachment of DNA probe molecules to surface-attached polymer chains, which can significantly enhance the sensitivity of a DNA-chip (Figure 2). Systems in which the polymer chains are attached with one end to a solid substrate are very interesting, not only from a chemical but also from a physical point of view. If the grafting density of the polymer molecules is very high, the polymer chains adopt a rather unusual conformation wherein the individual coils overlap [7–9]. Under these conditions, the polymer molecules are strongly stretched away
2 Coatings: From First Principles to High-Tech Applications
Fluorescence image obtained from a DNA chip based on a oligonucleotide functionalized polymer brush. The pattern and the intensity of the spots allows for the determination of the sequence of the unknown analyte-DNA.
Figure 2
from the surface and achieve a molecular shape which is far from the typical random coil conformation that polymer molecules assume in solution. Such surfaceattached films with strongly stretched chains are usually referred to as “polymer brushes” [10]. Polymer brushes are very interesting systems, as the strong stretching of the polymer chains leads to concurrent drastic changes in the physical properties of the systems. For unstretched polymer chains, a slight molecular deformation leads to a moderate increase of the energy stored in the system (entropy elasticity). However, when the molecules are already strongly stretched – as is in the case of a polymer brush – the energy penalty for the same small deformation is large. Accordingly, in all situations where the stretching of the polymer chains is of concern – for example, during the shearing of such surfaces or when the film is penetrated by other polymer chains from solution – very strong differences can be observed to the behavior of free coils [11–13]. Whilst systems in which polymer chains have one end tethered to a substrate appeared some years ago to be quite exotic, and significant doubts persisted that such brushes with high grafting densities could be obtained in practice, the development of methods where polymers are grown directly on the surface of a substrate by using surface-initiated polymerization has led to a large number of such systems becoming available. However, before describing more detailed aspects of surface-initiated polymerization, more general aspects of coatings will be briefly discussed.
2
Coatings: From First Principles to High-Tech Applications
For a large number of chemical and physical processes – both in daily life and in technical applications – the bulk properties of a material as well as the structure and composition of its surfaces determine the performance of the entire system. In order to control the interaction of a material with its environment, coatings consisting of thin organic films are frequently applied to the surfaces of these solids (Figure 3). In many cases, the coating serves simply as a barrier against a hostile envi-
3
4
Polymer Brushes: On the Way to Tailor-Made Surfaces
Schematic depiction of use of thin polymer coatings to control the interaction of a material with the surrounding environment.
Figure 3
ronment and allows for protection against corrosion or other chemical or photochemical degradation. Although corrosion protection is certainly the most prominent aspect of surface coatings as far as market and materials volumes are concerned, thin organic coatings are also applied in a large number of high-tech applications, ranging form microelectronics [1] to biomedical devices [3,4]. When considering such applications, thin organic coatings are applied to control the interactions between the material and its environment. Examples of interface properties which can be controlled by deposition of a thin organic film onto a surface include friction [11,13–17], adhesion, adsorption of molecules from the surrounding environment, or wetting with water or other liquids. In medical applications, coatings allow control of the interaction of biological cells and biomolecules with artificial materials in order to enhance the biocompatibility of an implant, or to avoid the nonspecific adsorption of proteins onto the active surfaces of an analytical device [18]. It is well known that coatings, even when only a few Angstroms thick, can influence the surface properties of a material so strongly that the chemical nature of the underlying material becomes completely hidden and the interaction of the whole system with the surrounding environment is governed by these extremely thin coatings (“stealth effect”). This is an advantageous situation for materials engineering as it allows optimization of the bulk and surface properties of a material separately from each other. In addition, the application of functional coatings allows the coverage of a surface with groups which interact with other molecules in their environment through specific molecular recognition processes. Such a strategy is, for example, very important for the control of the adhesion of biological cells to artificial substrates. In such a case, thin layers containing cell recognition peptide sequences can induce strong adhesion of the cells to the substrate surfaces, to which they otherwise would show only a very unfavorable adhesion behavior [19]. One example of a system where the covering of a surface with an ultrathin coating is a prerequisite for that system to function is a computer hard disk [2] (Figure 4). If the uncoated surface of a thin film magnetic disk is subjected to strong shear, such as the sliding of a read/write head on the disk surface, then almost instantaneous damage can be observed. The disk shows, even upon the first contact with the head, a strong stick-slip behavior and a high friction coefficient, while the debris
2 Coatings: From First Principles to High-Tech Applications
a)
(a) Computer hard disks are protected against mechanical wear by ultrathin layers of perfluorinated polymers. (b) Hard disk in an accelerated wear test: (i) unlubricated and (ii) after application of 1.5 nm chemisorbed and 1 nm physisorbed lubricant; the high friction coefficient and
Figure 4
5
b)
the strong noise indicate a strong stick-slip behavior, which is the beginning of a catastrophic failure of the system. (Reprinted with kind permission from Ref. [2]; . American Society of Mechanical Engineering, 1996.)
generated by this damage leads to rapid failure of the disk. However, if a film of a perfluoropolyether of typically only 2–4 nm thickness is attached to the disk, the tribological properties are greatly improved, the wear is reduced, and the mean time to failure of the disk is greatly prolonged (Figure 4). A second example where ultrathin organic coatings control the performance of the whole system is the control of interface properties of materials in contact with blood. If artificial materials are brought into contact with blood, then blood proteins such as fibrinogen adsorb very rapidly to the surfaces of the implant or sensor surface, followed by the adhesion of blood cells to these protein layers. This reaction cascade leads almost immediately to strong changes of the surface composition of the active surfaces of the sensor or implant. After a short period of time, blood clots
SEM image of a fibrin network and thrombocytes on the surface of an artifical heart value (picture courtesy of Dr. A. Schlitt, University Hospital Mainz, Germany).
Figure 5
6
Polymer Brushes: On the Way to Tailor-Made Surfaces
become attached to the surfaces of the blood-exposed materials (Figure 5). Eventually, the blood clots can break off from the surface into the blood stream, where they pose a life-threatening situation for the patient [18]. It has been shown, that the application of just a polymer layer which is just a couple of nanometers thick can dramatically reduce the adhesion of the blood proteins and thereby greatly improve the blood compatibility of the material [20–22].
3
Surface-Coating Techniques
Depending on the type of interaction between the molecules which are constituents of the coating and the substrate which is to be modified, two classes of strategies for the deposition of thin organic coatings can be distinguished. In one of these, the molecules interact with the substrate by physical forces [7–9], whilst the other class consists of molecules which are attached to the surfaces through chemical bonds. In the latter case, a monomolecular layer or a surface-attached network is very strongly (“irreversibly”) attached to the surface. This classification is not simply a formality, but the type – and accordingly the strength of interaction – also has a very strong influence on the physical properties of the coating, the film thicknesses which can be obtained through such a method, and the long-term stability of the coating in problematic environments. A number of technologically important coating techniques rely on physical interactions between the deposited molecules and the substrate, including: . . . . .
painting/droplet evaporation spray coating spin coating dip coating doctor blading
Although being quite different in detail, a common feature of all of these processes is that the molecules are deposited from solution and the solvent evaporates during the coating process (Figure 6). The techniques described above are somewhat empirical in nature, as certain parameters such as the rate of evaporation of the solvent depend on specific details of the individual process and are accordingly difficult to predict a priori, but in many cases are simple to reproduce. Accordingly if the deposition conditions are properly controlled, layers with well-defined thickness and good homogeneity can be generated without major effort. Several of these processes, such as dip- and spin-coating, allow the deposition of extremely thin film coatings (starting from just a few nanometers thickness), but essentially no upper limit to film thickness exists, if appropriate conditions are applied. In contrast to these rather empirical processes, more sophisticated coating techniques have been developed, including the Langmuir-Blodgett technique [23], the adsorption of monomolecular layers of homo- and block copolymers [7] from solution, and the Layer-by-Layer (LbL) [24] technique in which multilayer stacks of oppo-
3 Surface-Coating Techniques
a)
b)
c)
Schematic illustration of different processes used for the deposition of organic molecules and/or polymers on surfaces: (a) spin-coating. (b) Langmuir-Blodgett-Kuhn (LBK) technique; (c) adsorption from solution.
Figure 6
sitely charged polyelectrolytes are deposited onto a (charged) substrate. These techniques allow for much better control of the internal structure of the deposited layers, and also for extremely high precision with regard to the thickness of the coatings. All of the coating techniques, except perhaps for the Langmuir-Blodgett technique, are – from a technological viewpoint – rather simple, and the generation of layers typically requires no complicated set-ups to generate the coatings. The molecules are attached to their substrates by physical interactions, and consequently the forces holding them at the surface are rather weak. In some cases this situation is desirable, but in others it becomes problematic as it is more likely to lead to adhesive failure of the system. Under unfavorable conditions, the films can be subject to destruction by the “Big Four Ds”:
7
8
Polymer Brushes: On the Way to Tailor-Made Surfaces . . . .
desorption during solvent exposure; displacement by molecules which have stronger interaction with the surface; dewetting (for films above the glass transition temperature, Tg); and delamination (for films below Tg).
Desorption and displacement are especially important, as coatings are usually not prepared and kept under ideal (i.e., ultrahigh vacuum) conditions, but rather are exposed to environments containing all sorts of contaminants. In these “real-life” environments, contaminants are present on every surface, and/or competing adsorbates will fight for surface sites during or after the coating process. Examples of molecules which are present in many different environments, and which typically compete quite efficiently with coating materials for surface sites, include water, ions, polyelectrolyte molecules, or oils. The contaminants or displacing agents might have such a strong interaction with the surface that the molecules of the coating can no longer remain in contact with the substrate, but eventually will instead be located on top of a thin layer consisting of contaminant/displacer molecules. In this respect, polar surfaces which absorb ambient water are especially problematic, as water has a strong affinity for such surfaces and exhibits a very high adsorption enthalpy. Accordingly, water functions as a very efficient competitor for surface sites and easily displaces adsorbed molecules from such high-energy surfaces. What renders the situation even worse is that under these conditions the surface properties of the material become strongly dependent on the history of the sample – that is, which environment the sample has been exposed before use – and this is, potentially, a very problematic situation. Dewetting occurs in all systems, where the surface tension of the substrate is lower than that of the coating material if the molecules are allowed to reach an equilibrium. This may be achieved either by heating the film above Tg, or by exposure to molecules which can act as a plasticizer for the polymers of the coating. In contrast, delamination occurs if the films are in the glassy state and subjected to wide temperature swings, or if the coating swells in the environment to which it had been exposed, while the substrate does not swell. In such cases, strong mechanical stress develops at the interface, and this may cause the entire film to peel off, leading to large-scale adhesive failure. An alternative to the above-mentioned procedures which allows improvement in the long-term stability of coatings even in very adverse environments, is to attach the molecules of the coating to the surface of the substrate through chemical bonds. The price which must be paid for an enhanced stability of the system is a more complicated coating procedure and/or the requirement to choose the coating conditions more carefully, so that the surface reaction proceeds in high yield and with limited side reactions. A current, very frequently employed strategy for the preparation of well-controlled surface layers is the use of small molecules with a reactive head group that is amenable to form a covalent bond with a corresponding chemical moiety on the surface of the substrate, which is to be modified. As this process is selflimiting – that is, the surface-attachment reaction stops when all the reactive surface groups have been consumed or are no longer accessible – such layers are commonly
3 Surface-Coating Techniques
Schematic of the self-assembly process and examples of anchor groups used for the modification of surfaces with selfassembled monolayers (SAMs) of organic molecules.
Figure 7
called self-assembled monolayers (SAM) [25]. Examples are silanes on oxide surfaces, phosphates or phosphonate on metal(oxide)s, and thiols or disulfides on noble metal surfaces (Figure 7). In this way, surface coatings can be obtained which are very stable and may even have a strong degree of positional and orientational order. In some cases, even crystalline packing of the surface-attached molecules has been observed. If molecules are assembled that carry at their tail end a specific chemical moiety or a biochemically active group, it is possible to obtain a more or less strict 2D arrangement of these functionalities (Figure 8) [26]. Examples are molecules which contain fluorocarbon segments in the assembling units [27–29], and can convert a hydrophilic surface into a highly water-repellent hydrophobic one, or the introduction of “ligands” as recognition sites in bio-affinity assays. In this way, surfaces can be generated – for example, on top of the transducer of a biosensor – that very specifically bind proteins from solution [30,31].
Example of a structure prepared via soft lithography from acid and methyl-terminated thiols. First, the Me-terminated thiol was stamped onto a gold surface; second, the
Figure 8
unmodified areas were backfilled from a solution containing the acid-terminated thiol. (Reprinted with kind permission from Ref. [26]; .Wiley-VCH, 1998.)
9
10
Polymer Brushes: On the Way to Tailor-Made Surfaces
In some of these applications the intrinsic limitations of this strictly 2D arrangement of the functional groups are evident: the maximal surface density of the functional moieties is limited by the surface area cross-section of the assembled unit. In some cases it is even lower than the arrangement of the individual functional units at such high packing densities in some cases leads to a mutual blocking or, at least, to a limited accessibility. One obvious solution to the above problem is the extension into the third dimension – that is, the use of polymers carrying the functional groups along the chain, thus generating higher cross-sectional densities of these groups and simultaneously guaranteeing good accessibility.
4
Surface-Attached Polymers
Most approaches which aim at attaching polymers to a surface use a system where the polymer carries an “anchor” group either as an end group or in a side chain. This anchor group can be reacted with appropriate sites at the substrate surface, thus yielding surface-attached monolayers of polymer molecules (termed “grafting to”) (Figure 9) [32–37]. While the attachment of terminally functionalized polymers to the surface leads to layers, where one group is connected to the surface, side chain attachment usually leads to multiple attachment points and, accordingly, a rather flat conformation of the polymer molecules. In the latter case, the functional groups of different molecules compete for reactive sites on the surface, and accordingly the amount of polymer which can be immobilized depends strongly on the reaction conditions, and especially on the concentration of the polymer in solution. This chemical linking of polymers to a substrate surface is, in principle, closely related to the formation of self-assembled monolayers of low molecular-weight compounds described above. Accordingly, if such (end)functionalized polymers are availa)
b)
Schematic illustration of different processes used for the attachment of polymers to surfaces: (a) “grafting to”; (b) grafting via incorporation of surface-bound monomeric units; (c) “grafting from/surface-initiated polymerization”.
Figure 9
c)
4 Surface-Attached Polymers
able (which is a nontrivial condition, as the synthesis of polymers with reactive end groups is far from being trivial), the attachment of the polymers is, from a chemical point of view, rather simple. Another straightforward technique for the attachment of polymers to surfaces which allows the generation of a great variety of functional surfaces is to carry out a polymerization reaction in the presence of a substrate onto which monomers had been attached [32,38–41]. In such a polymerization reaction, the surface-attached monomers are incorporated into growing polymer chains in the very same way as their peers in solution (Figure 9). However, once one or more surface-attached monomers are incorporated, the polymer is “glued” firmly to the surface. During the process, a macroradical initially attacks the monomers on the surface, while in a second step further monomers units are added, so that the chain grows again, away from the surface. However, careful studies of the polymerization mechanism have shown that the “grafting to” step represents the bottle-neck of the reaction and thus limits the polymer immobilization [42,43]. Accordingly, very similar layers are obtained by using immobilized monomers as by the chemisorption of preformed chains. A general limitation of the technique is that the substrate must be immersed in a polymerization solution, but if this poses no problem it is one of the simplest techniques to generate surface-attached layers, especially as there is no need to synthesize a polymer functionalized with an anchor group. Although “grafting to” reactions are easy to perform, it should be noted that certain rather strict limitations apply to the structures which can be realized by use of a “grafting to” strategy. First, the use of reactive anchor groups for the surface-attachment of polymers imposes some rather strict limitations on the choice of functional groups available for incorporation into the polymer. One of the reasons for this is that the functional groups on the polymer can compete with the anchor moieties for surface sites. Especially if the aim is to immobilize functional polymers containing highly polar or charged groups onto polar surfaces, the adsorption of functional groups to the surface can be very strong and compete very effectively with the chemisorption process. Such competition between anchor and functional groups has been observed, for example, in the case of the attachment of a low molecular-weight alkoxysilane containing amine groups to a silicon oxide surface [44–46]. In such a system, interactions between the basic amine groups of the SAM-forming silane and the rather acidic silanol groups of the silicon (oxide) substrate can strongly compete with the condensation reaction of the alkoxysilyl moiety with the substrate silanol groups. As result, layers are obtained which contain both physisorbed molecules due to acid–base interactions and chemically attached molecules. Second, in order to obtain a fast and complete surface attachment reaction with a high surface density of chains covalently bound to the substrate, rather reactive anchor groups are required. These groups, however, tend not to tolerate the simultaneous presence of a large variety of functional groups in the polymer. For example, if a chlorosilyl group is chosen as an anchor group for the attachment of the polymer to a silicon oxide surface, this choice excludes the incorporation of many functional groups into the polymer, including amine-, hydroxyl- or carboxylic acid moieties, as these would react with the chlorosilyl groups.
11
12
Polymer Brushes: On the Way to Tailor-Made Surfaces
At first view, there is a tendency to consider that resorting to less reactive anchor groups – for example, using a less reactive alkoxysilane instead of a highly reactive chlorosilane – would solve the problem. This, however, is incorrect as a more indepth analysis shows. If the nucleophilicity of the anchor group is reduced, this affects both the undesired side reaction, which is the reaction of the functional group with the anchor group, and which leads to loss of anchor moieties, and the desired reaction of the anchor group with a group at the surface of the substrate, which results in a successful chemisorption reaction. Accordingly, both reactions are slowed down at the same time, and the ratio between the rates of the two reactions remain the same in all cases. Another complication inherent to “grafting to” processes is an intrinsic limitation of the film thickness, and accordingly the number of functional groups per surface area which can be obtained by using such an approach. Films generated by chemisorption from solution are limited to (dry) thicknesses of typically 1 to 5 nm. This limitation has both kinetic and thermodynamic origins. With increasing coverage of the surface with attached chains, the polymer concentration at the interface quickly becomes larger than the concentration of polymers in solution. Additional chains, which are to become attached to the surface, must diffuse against this concentration gradient that ever increases with increasing grafting density of the attached polymer (Figure 10). This diffusion slows down the immobilization reaction at the surface further and further as the reaction proceeds. Thus, the rate of the attachment reaction levels off rather quickly and further polymer is linked to the substrate only at an extremely slow rate due to this kinetic hindrance. Indeed, it has been shown [42,43] both theoretically and experimentally that once the surface-attached coils overlap, the attachment of further polymer molecules takes place on a logarithmic time scale, and already at rather low graft density time frames of thousands or even millions of years would be required to add a few more nanometers of polymer to the layer. Accordingly, as far as practical reaction times are concerned, films generated by this technique are intrinsically limited with regard to the film thickness. Furthera)
Figure 10 Schematic illustration of the “grafting to” process. (a) Chains that are to be attached to the surface can easily reach the surface at low graft densities. (b) The attachment process comes to a virtual halt as soon as the
b)
surface is covered with polymers, as the already attached chains form a kinetic barrier against which incoming chains have to diffuse to reach the surface.
5 Polymer Brushes: General Features
more it should be noted that, even if this kinetic limitation is somehow circumvented, the attachment of chains to a strongly covered surface becomes unfavorable also for thermodynamic reasons. At high grafting densities the surface-attached polymer chains are in a rather stretched conformation due to the presence of strong segment–segment interactions, as will be discussed in more detail below. A chain, which is now becoming attached to the surface, must change from a coil conformation in solution to a stretched (“brush-like”) conformation at the surface. The entropy loss during this process, however, is only compensated by the establishment of one chemical bond, namely the one connecting the polymer to the surface. Hence, the higher the graft density of the chains at the surface, the stronger will be the entropy penalty, and this rapidly precludes the attachment of further chains.
5
Polymer Brushes: General Features
As mentioned briefly above, the term “polymer brush” refers to a system in which chains of polymer molecules are attached with one or with a few anchor points to a surface in such a way that the graft density of the polymers is high enough that the a)
b)
c)
Figure 11 Artist’s perception of the terms (a) “mushroom”, (b) “pancake” and (c) “brush” used for the different possible conformations of surface-attached polymers.
13
14
Polymer Brushes: On the Way to Tailor-Made Surfaces
surface-attached chains become crowded and are stretched away from the surface (Figure 11). From the stretching of the polymer chains perpendicular to the surface, several new physical phenomena arise. Examples are ultralow friction surfaces [11,12] obtained through coating of two surfaces that slide against each other with polymer brushes, or the so-called autophobic behavior [47–50], in which materials coated with surface-attached polymer chains do not become wetted by free polymer, even if the surface-attached and the free chains are chemically identical (Figure 12).
Figure 12 Optical micrograph of a dewetted polystyrene layer (initial thickness 60 nm) on top of a polystyrene brush (6 nm; prepared via grafting from). This picture was taken after annealing the sample for 40 h at 180 CC (scale bar = 200 lm). (Reprinted from Ref. [50], with kind permission; . American Chemical Society, 1996.)
In the following discussion, the focus will be placed on polymer brushes at solid surfaces, although brush-like chain conformations can also be obtained at the boundary between phases in block copolymers [8] or in so-called molecular “bottlebrushes” [51–53]. In the latter system, polymers are attached as side chains to the backbone of a polymer molecule, so that every segment of the backbone carries such a polymeric side chain. Although the overall physical picture for the different systems is very similar, here only chains attached to solid surfaces at one end will be described and discussed. When polymer molecules are tethered to a surface, two basic cases must be distinguished depending on the graft density of the attached chains [8–10]: 1.
2.
If the distance between two anchoring sites is larger than the size of the surface-attached polymers, the segments of the individual chains do not “feel” each other and behave more or less like single chains “nailed” down onto the surface by one end. Depending on the strength of interaction of the polymer segments with the surface, again two cases must be distinguished [10]. If the interaction between the polymer and the surface is weak (or even repulsive), the chains form a typical random coil that is linked to the surface through a “stem” of varying size. For such a situation, the term “mushroom” conformation has been coined (Figure 11). However, if the segments of the surfaceattached chains adsorb strongly to the underlying surface, the polymer molecules obtain a flat, “pancake”-like conformation (Figure 11). A completely different picture is obtained if the chains are attached to the surface at such short distances between the anchor points that the polymer molecules overlap. In this case, the segments of the chains try to avoid each other as much as possible and minimize segment–segment interactions by
6 Theory of Polymer Brushes
stretching away from the surface (Figure 11). This chain stretching, however, reduces the number of possible polymer conformations, which is equivalent to a reduction in the entropy of the chains. This loss of entropy gives rise to a retracting force trying to keep the chains coiled, as occurs in a stretched piece of rubber. Thus, a new equilibrium at a higher energy level is obtained in which the chains are stretched perpendicular to the surface. 6
Theory of Polymer Brushes
The theoretical description of polymer brushes attached to surfaces of different topologies – that is, planar and curved surfaces – is well developed [7–9]. However, as in this book the main focus is set on new developments concerning the chemical methodology, only a very brief outline of the theory of brushes is provided here. For a more detailed discussion, the reader is referred to reviews recently published on this subject [7–9]. The key idea behind the theoretical description of polymer brushes is that the free energy F of the chains is obtained from a balance between the interaction energy between the statistical segments Fint and energy difference between stretched and unstretched polymer chains Fel (elastic free energy) caused by the entropy loss of the chains: F = Fint + Fel
(1)
The most important parameters, which are of interest for a description of brush systems, are the segment density profile (u(z)) of the surface-attached chains and/or the brush height h as a function of the graft density r, the molecular weight (/degree of polymerization) of the surface-attached chains, and the solvent quality of the contacting medium (Figure 13). The first description of such a brush system has been attempted by Alexander [54] for monodisperse chains consisting of N segments, which are attached to a flat, non-adsorbing surface with an average distance of the anchor points d much smaller
Figure 13 Two hundred chains of a polymer brush (chain length N = 100) under good solvent conditions. (Reproduced with kind permission from Ref. [11]; . Springer, 1998.)
15
16
Polymer Brushes: On the Way to Tailor-Made Surfaces
Figure 14 Schematic illustration of the Alexander model for the theoretic description of polymer brushes. The chain segments with the “blobs” (indicated by the circles) behave as random (“Gaussian”) coils. (d represents the average distance between anchor points.)
than the radius of gyration of the same unperturbed chains not in contact with the surface (Figure 14). If both the interaction energy resulting from binary monomer– monomer interactions and the elastic energy of a Gaussian chain are calculated and minimized in respect to the brush height h, the following equation is obtained for brushes in a good solvent: h ~ N N r1/3
(2)
In a poor solvent – that is, close to H conditions – the exponent describing the influence of the grafting density is slightly different and h ~ N N r1/2
(3)
is obtained. It should be noted, that in both cases the brush height scales linearly with the degree of polymerization/molecular weight of the polymer molecules, which is a much stronger dependency than that of the size of a polymer coil in solu-
Figure 15 Schematic illustration of segment density profiles for surface-attached polymers in different regimes. For details, see the text (adopted from [9]).
6 Theory of Polymer Brushes
tion on the molecular weight, where the radius of gyration Rg, scales with Rg ~ N0.59 for a polymer in a good solvent and Rg ~ N0.50 for solutions close to H conditions. Although the Alexander model is very simple, it predicts the experimentally observed scaling behavior more or less correctly and allows an understanding of some of the most striking properties of polymer brushes, such as lubrication and the wetting behavior. More sophisticated models have been developed to describe the segment density profile of the brushes (Figure 15). To this numerical and analytical self-consistent field (SCF), theories [55–57] for such systems have been proposed based on the assumptions that, for strong stretching and high molecular weights of the brushes, fluctuations around the most favorable configuration of the polymer chain diminish. A general result of the SCF calculations is, that the segment density profile is more or less parabolic as long as the grafting density is moderate and the molecular weight of the brush chains is high. At very high grafting densities the SCF assumptions are no longer valid, as three body interactions between the polymer segments become significant. The results of the SCF calculations have been verified both experimentally and in simulations. For the latter, molecular dynamics and Monte Carlo methods have been employed [58]. If smaller differences in the numerical coefficient are neglected, then the SCF results are in good agreement with the results from simple scaling arguments. In addition to these somewhat straightforward calculations, more complicated situations have also been tackled where the polymer chains have a distinct polydispersity [59], are in specific topologies such as attached to small particles [60], which exhibit a significant curvature also on the molecular scale, and to brushes which carry charges along the polymer chain [61] (Figure 16). In particular, the latter case can become very complicated if the polymer chains interact specifically with ions in the surrounding medium, as under these circumstances the situation can no longer be described by simple mean field approaches, but specific complex formation and (local) changes in the solubility of the polymer play a key role in describing the swelling behavior of such brushes.
Figure 16
Schematic illustration of a polyelectrolyte brush (PEL brush).
17
18
Polymer Brushes: On the Way to Tailor-Made Surfaces
7
Synthesis of Polymer Brushes
An obvious requirement for forcing polymer molecules into brush-like conformations is that the strength of anchoring of the molecules to the interface is sufficiently high that the molecules are connected irreversibly to the surface of the substrate. A second requirement is that the synthetic strategy allows for the generation of grafting densities high enough to cause sufficient repulsive segment–segment interactions within the surface-attached chains to induce significant chain stretching. In particular, the latter condition imposes some strict limitations onto the appropriate synthetic strategy for brush formation as the chains lose a considerable amount of entropy when stretched into an elongated form. In the following section, four different approaches to reach these goals will be briefly discussed. A complete review of the published literature on this subject would clearly be beyond the limits of this introductory chapter.
Approach 1
In the first approach, amphiphilic block copolymers consisting of a water-soluble block and a water-insoluble block are spread at the air-water interface [62,63]. The water-soluble block attempts to dissolve into the aqueous subphase, but is anchored to the air-water interface by the hydrophobic block. Upon compression of the thus obtained Langmuir monolayer, the distance between the anchor points of the polymer chains decreases and the hydrophilic block is stretched away from the surface into the aqueous subphase. A prerequisite for this is that the hydrophobic block is in the molten state, because only is it possible for a rearrangement of the chains within the film to occur upon compression. Furthermore, it is important that the hydrophilic balance is chosen in such a way that the loss of chains to the subphase and the formation of micelles can be avoided. The thus obtained films can be crosslinked through photochemical reactions and transferred to a solid substrate.
Approach 2
In the second case, block copolymers or end-functionalized polymers are physisorbed to a solid surface [7]. End-functionalized polymers can be discussed together with block copolymers as they are structurally very similar to such systems in terms of their essential physics of adsorption to a solid surface. In some ways they can be viewed as block copolymers with a very short block, consisting only of one unit. In the block copolymer concept, one block adsorbs strongly at the surface and acts as an anchor for the polymer chains. The other block adsorbs only weakly at the surface – that is, the interactions of the polymer with the solvent are stronger than those with the surface – and so the block floats in the solvent like a buoy. Although during the past, many different polymer layers have been prepared by this route, the
7 Synthesis of Polymer Brushes
chemical variability of these systems is somewhat limited as a solvent must be available in which the block copolymer adsorbs to the surface without formation of micelles either in solution or at the surface. Furthermore, as the layer formation requires the diffusion of polymer molecules through the layer of already attached chains, this limits the range of graft densities that can be obtained using this technique. In addition, as the interaction with the surface is based simply on physical interactions, anchoring of the molecules to the substrate surface is relatively weak, and this further limits the graft densities available and decreases the stability of the films.
Approach 3
As has been discussed above, the chemisorption of polymer molecules leads to chains which are covalently attached to surfaces [32–37]. Although situations can be envisioned in which the polymer chains are slightly stretched, such processes are strongly limited in terms of the obtainable graft density, especially for high molecular-weight polymers, and this results in only relatively weak stretched polymer chains.
Approach 4
Much higher graft densities can be obtained when the polymer chains are grown at the surface of the substrate in situ (Figure 17) [5,6]. To this initiator, species are either generated or self-assembled at the surface of the substrate, followed by initiation of chain growth from these surface-attached initiators, for example by controlled or free radical chain polymerization. The surface-polymerization can be started thermally either through a chemical process or photochemically. In this way, polymer monolayers with film thicknesses of more than 2000 nm in the dry state have been obtained (Figure 18). In this case, polymer molecules with number aver-
Figure 17 Common synthetic strategy for the generation of polymer brushes via surface-initiated polymerization. An initiator molecule is deposited on a surface by means of a self-assembly process via the reaction of an anchor group to suitable surface sites and, subsequently, chains are grown on the surface from the initiating sites.
19
20
Polymer Brushes: On the Way to Tailor-Made Surfaces
a)
b)
Figure 18 (a) Optical waveguide spectrum (symbols) obtained from a PMMA brush deposited on an evaporated SiO2 layer. The solid line was obtained from model calculations based on a Fresnel formalism assuming a 2200 nm-thick polymer layer. The sample was
prepared in neat MMA at 50 CC, polymerization time: 96 h. (b) Thickness of PMMA brushes as a function of monomer concentration; polymerizations were carried out at 60 CC for 18 h in toluene as a solvent (if required).
age molecular weights of several 106 g mol–1 are attached at distances of anchor points of less than 3 nm. Surface-initiated polymerization reactions work for any polymer which can be obtained by a chain growth reaction such as free and controlled radical polymerization, carbocationic polymerization, anionic polymerization, and ring-opening metathesis polymerization (Table 1) [63–97]. The different polymerization reactions can be carried out on surfaces of very different topologies (planar, curved, and irregular surfaces), and allow for the generation of polymers from a wide spectrum of different monomers. It would be far beyond the scope of this overview to try to review all recent developments on the synthesis of such systems, and a large variety of different synthetic routes for the generation of polymer brushes through surface-initiated polymerizations will be detailed in the following chapters. However, at this point some comments should be made on controlled or living polymerization reactions for the growth of polymer molecules through surface-attached initiators. In this respect, liv-
7 Synthesis of Polymer Brushes Selected systems for the generation of polymer brushes via surface-initiated polymerization. The list is by no means exhaustive, and is only meant to demonstrate the wide variety of synthetic strategies that have been developed over the past decade.
Table 1
Mechanism
Initiator/initiating species
H N
Me O Si Me
Free radical
Maximum thickness Reference(s) (nm)
CN N Me
O
N
O
N Me
O
N
N Me
O
N
N
Me Me
73,74
120 nm
75,76
150 nm; 700 nm (water accelerated)
77–83
OH
Si (CH2)n
O
Br
O O
O
N
O Si (CH2)2
SO2Cl
100 nm
84–86
Me O Si (CH2)2 Me
CH2Cl
n.a.
87–89
< 60 nm
82,90
< 40 nm
91–97
Me O Si Me
Me O
Br O
Various systems for cationic and anionic polymerizations, RAFT and reverse ATRP
NA = not applicable.
n.a.
CN Me
Me O Si Me
Others
65–72
CN
TEMPO
ATRP
up to 2200 nm
Me Me
N
O
O
O
63,64
CN
Me O Si Me
O
~ 100 nm
CN
CN S (CH2)11 O
CO2H
CN
CN
Me O Si Me
Me
21
22
Polymer Brushes: On the Way to Tailor-Made Surfaces
ing systems with rapid initiation are of major interest as they allow, in principle, surface-attached polymer chains with relatively narrow molecular weight distributions to be obtained. This facilitates comparison with theoretical models developed for surface-attached polymer brushes, provided that the initiation process is sufficiently efficient to allow high graft densities and that the molecular weight of the surfaceattached chains is high enough to allow such a discussion. Indeed, controlled polymerization approaches are expected to become even more interesting for the synthesis of surface-attached polymer brushes, as a large variety of functional brushes can also be obtained by using these methods. At present, major efforts are made – especially in the area of controlled radical polymerization – to polymerize functionalized monomers to create high molecular-weight compounds with low polydispersity.
8
Polymer Brushes as Functional Materials
For many applications of polymer brushes, it is not simply protection against mechanical or chemical damage that is important. Rather, where the polymer layer acts
Figure 19
Examples of functional groups incorporated into polymer brushes.
8 Polymer Brushes as Functional Materials
as a barrier against contact with the environment, a more specific chemical response to the surrounding medium is desirable. Examples of this situation include layers into which DNA, protein molecules or complexing agents – each of which shows a specific reaction towards certain metals – are chemically incorporated [99]. To this end, polymers with desired functional groups can be formed directly from the corresponding monomers (Figure 19). For example, brushes carrying either charges (“polyelectrolyte brushes”) [71,74,75,100–102] or pendant mesogenic units (“LCbrushes”) [103,104] have been prepared using this direct route. An alternative would be first to generate a brush from a simple and inexpensive precursor monomer containing a reactive group, and this can then be transformed into the final moiety through a polymer analogous reaction. Examples of such compounds are monomers carrying an active ester, epoxide, azalactone or amine groups [99]. It is quite evident that, in principle, the direct approach is much simpler as the desired brush can be prepared in a one-step reaction. However, this places some rather stringent requirements on the availability of the monomer, because if an incorporation of repeat units with especially valuable groups into the polymer is desired, then the amount of the valuable monomer needed for the brush generation is rather large. The reason for this is that the molecular weight of the brushes is, for most polymerization mechanisms, directly connected to the monomer concentration; consequently, if high molecular-weight polymers are desired, then relatively large amounts of monomer are required. A second requirement is that the functional group is compatible with the polymerization process used for brush formation. Monomers containing moieties that show excessive transfer properties such as sulfur groups cannot be used in direct polymerization processes as they would lead to side reaction and/or only low molecular-weight brushes. This is especially important, as for a surface-initiated polymerization reaction any chain transfer is equivalent to a termination reaction, because after the transfer further polymer is only generated in solution and removed in a subsequent extraction of the film. In addition to this, a two-step pathway for the generation of functional brushes has the advantage that it is not necessary to study the polymerization behavior of each new monomer with a new functional group “from scratch” because a number of different functionalities can be incorporated using the same precursor monomer. Examples are brushes of homo- or copolymers with N-hydroxysuccinimide ester or epoxide groups through which a large variety of different functionalities can be introduced by aminolysis. For example, the preparation of brushes that carry thiol, pyrene, oligoethyleneoxide or bioactive groups such as peptides or oligonucleotide units have been reported using the same precursor monomer. If the direct polymerization procedure is applied, then each and every one of these monomers must be studied with regard to the polymerization kinetics in order to obtain an in-depth understanding of the brush-forming properties. The use of “living” polymerization reactions – that is, reactions where the number of active or dormant and thus potentially active species remains more or less constant on the time scale of the polymerization reaction – allows the generation of brushes which carry at the end pointing away from the surface a functional group, or brushes which consist of a copolymer [96,98,105,106]. The latter constitute a very
23
24
Polymer Brushes: On the Way to Tailor-Made Surfaces
interesting system, as all polymer molecules are surface-attached and accordingly large-scale, irreversible reorganizations of the chains are prohibited, and the morphology of the polymer film is directly coupled to the composition of the copolymer brush. Thus, upon exposure to an environment – which is selective for one of the two components – the morphology of the layers of such copolymer brushes can be easily switched from one morphology to the other, and monolayers with very unusual topographies can be obtained. Another interesting system is generated if not all of the initiator is used up during the polymerization reaction, or if two different initiators are co-immobilized on the substrate surface. In such a case, after completion of the growth of one polymer species, some initiator is still present which can be used to kick-off the polymerization of another monomer [105,107,108]. This then results in the growth of a second type of polymer in direct neighborhood to the chains already attached to the surface. Such systems – which commonly are called “mixed brushes” – seem especially attractive as the two polymers can have very different interaction strengths with the surrounding of the film. This situation is very similar to that of block copolymer brushes described above. If one environment strongly prefers one polymer over the other, whilst a second environment favors the reverse situation, surfaces with switchable surface chemistries are generated. When the polymer layer is alternately exposed to one or the other environment, the internal structure of the polymer changes accordingly and a system that can adapt to the substrate environment (“smart surfaces”) is obtained.
9
Microstructured Polymer Brushes
The (micro-)patterning of polymer brushes is especially interesting as all the polymer molecules are permanently attached to the surface [73,109]. This is an important aspect, both for the generation of the patterns as well as for applications of the microstructured surfaces, as it allows exposure of the microstructures to good solvents for the polymers. The latter aspect is especially important for biological applications, as it allows strong swelling of the brush and provides a soft “cushion” for the biological system at the surface of the substrate. This is of special significance as proteins tend to denature in contact with hard, solid surfaces. Also, from the viewpoint of preparing microstructured systems, the generation of thick, surfaceattached monolayers is rather attractive as it allows the washing away of reagents after completion of a chemical reaction in the patterned structures, and hence the generation of multifunctional chemical patterns with high resolution (Figures 20 and 21). Indeed, in addition to simple chemical structures being “written” into the film, the use of step-and-repeat procedures allows the generation of very complicated chemical surfaces and structures. This contrasts strongly with the conventional lithographic procedures used in the semiconductor industry where, upon irradiation and solvent exposure, a relief is generated and hence topological rather than chemical structures are generated on the surface of the substrate.
9 Microstructured Polymer Brushes
a)
b) Figure 20 (a) Process used by Hawker et al. for the generation of polymer brushes with spatially resolved properties. A poly(t-butyl methacrylate) brush is covered with a photoresist containing a photoacid generator. Upon illumination of the sample through a mask, protons are generated in the illuminated areas. The protons diffuse into the underlying brush and hydrolyze the ester groups. (b) Illustration of the different wetting properties of a sample prepared as described in (a). The water on the sample only wets the illuminated areas – that is, the areas in which the chains were transformed to a poly-(methacrylic acid). (Reprinted with kind permission from Ref. [77]; . American Chemical Society, 2000.)
25
26
Polymer Brushes: On the Way to Tailor-Made Surfaces
a)
b)
c)
Figure 21 System used by Carter, Hawker et al. for the tuning of the feature size on nanostructures via a combined process consisting of (a) nanoimprinting and (b) surface-initiated polymerization from initiator sites (“inimers”) embedded into the mold; the AFM and SEM
images shown in (c) demonstrate the feature size of lines after nonoimprinting (A,B) and after the subsequent surface-initiated polymerization (C,D). (Reprinted with kind permission from Ref. [111]; . American Chemical Society, 2003.)
In principle, three different strategies can be followed for the generation of chemically micropatterned brushes, besides the trivial photoablation of the polymers by deep UV-irradiation: 1. 2. 3.
Deposition of the initiator in a patterned fashion and/or spatially addressed deactivation of a complete initiator monolayer. Spatially controlled growth of the polymer molecules through local addressing of the initiator and/or confinement of the monomer access. Spatially addressed chemical transformations of precursor brushes.
9 Microstructured Polymer Brushes
In the first case, the initiator is deposited (by inkjet printing or stamping) in certain areas of the substrate [110,111]. In a subsequent reaction step, the polymer is generated through growth of the polymer chains. In further reaction steps, initiator can be deposited in other, still uncovered areas of the substrate. Alternatively, a complete initiator monolayer can be formed and in selected areas the initiator deactivated or photochemically destroyed and evaporated, followed by growth of the brushes. In the latter case (photoablation of the initiator), new initiator can be attached to the substrate in the thus obtained blank areas, either directly or after a short etching process. In the second case, the surface-attached polymer chains can be generated through photopolymerization reactions or other means, spatially to kick-off the polymerization reaction. An alternative, in which many different polymers can be formed in a)
b)
Figure 22 (a) Schematic description of the l-stamping process used for the spatially resolved deposition of laminin to a brush containing active ester groups. (b) Neuronal cells aligning along the laminin grid deposited via this process.
27
28
Polymer Brushes: On the Way to Tailor-Made Surfaces
one polymerization step, would be to supply the monomer only locally, followed by simultaneous induction of the polymerization process for all monomers in the different locations– for example, through flood exposure with UV irradiation or through thermal initiation (depending on the monomer). In the third case, a precursor polymer brush would first be formed in pretty much the same way as has been described above for the generation of functional brushes. The only difference here is that the transformation reactions into the final functional brush are carried out locally through administering the reagents [77] (Figure 22).
10
Surface-Initiated Polymerization: The Overall Picture
Without attempting to gather all the information available for the synthesis of polymer monolayers by growing chains away from the surface, it can be safely stated that surface-initiated polymerization to generate tailor-made surfaces is becoming increasingly accepted. The number of systems for which the surface-attached layers of the initiator and the polymers have been well characterized, and the mechanism of the growth of surface-attached layers is well understood, has grown considerably during the past few years. Although only a short time ago it was doubtful that systems with a high graft density and strong stretching of the polymer chains could be synthesized at all, a variety of approaches is now available that allows to study the physics of densely grafted polymer brushes at ease. As most systems described in the literature have been extensively extracted with good solvents for the polymer, it is also clear that these systems show a high stability, even under rather adverse conditions. This is a clear distinction from other techniques of deposition of thin polymer films, where only weaker interactions to the substrate are employed. By using surface-initiated polymerization reactions, a wide range of monolayers containing functional groups has been synthesized over a wide spectrum of substrates. Indeed, one of the most attractive features of surface-initiated polymerization reactions is that they lead to highly swellable polymer layers attached to spherical, tubular, planar, and even very irregular surfaces such as those of components of complex microsystems. Another key feature of surface-initiated polymerization is that the application of a local stimulus allows local initiation of the polymerization reaction which, in turn, yields a spatially addressed growth of polymer chains. The performance of such locally addressable attachment of polymer molecules to generate chemically l-structured surfaces is particularly of interest, as this cannot be achieved by other techniques of thin layer deposition. Although at present it seems premature to outline the practical implications of surface-initiated polymerization reactions in depth, the future will undoubtedly reveal a wide variety of applications, most notably in the areas of microsystems technology and biomedical devices. On this basis, aspects of the practical applications of systems generated by surface-initiated polymerization will be discussed in Chapter 17.
References
References 1 Introduction to Microlithography, 2nd Ed.
2 3 4
5 6 7 8
9
10 11 12
13 14 15 16 17
18
19 20
(Eds.: L. F. Thompson, C. G. Willson, M. J. Bowden) American Chemical Society, Washington DC, 1994. J. RPhe, V. Novotny, T. Clarke, G. B. Street, J. Tribol. Trans. ASME 1996, 118, 663. M. Tirrell, E. Kokkoli, M. Biesalski, Surf. Sci. 2002, 500, 61. Surface and Interfacial Aspects of Biomedical Polymers (Ed.: J. P. Andrade), Plenum Press, New York, 1985. B. Zhao, W. J. Brittain, Prog. Polym. Sci. 2000, 25, 677. J. Pyun, T. Kowalewski, K. Matyjaszewski, Macromol. Rapid Commun. 2003, 24, 1043. A. Halperin, M. Tirrell, T. P. Lodge, Adv. Polym. Sci. 1992, 100, 31. R. A. L. Jones, R. W. Richards, Polymers at Surfaces and Interfaces, Cambridge University Press, Cambridge, 1999. G. J. Fleer, M. A. Cohen Stuart, J. M. H. M. Scheutjens, T. Cosgrove, B. Vincent, Polymers at Interfaces, Chapman & Hall, London, 1993. P. G. deGennes, J. Physique 1976, 37, 1445. G. S. Grest, in: Polymers in Confined Environments, Vol. 138, 1999, pp. 149. J. Klein, Y. Kamiyama, H. Yoshizawa, J. N. Israelachvili, G. H. Fredrickson, P. Pincus, L. J. Fetters, Macromolecules 1993, 26, 5552. J. Klein, E. Kumacheva, D. Mahalu, D. Perahia, L. J. Fetters, Nature 1994, 370, 634. G. S. Grest, Curr. Opin. Colloid Interface Sci. 1997, 2, 271. G. S. Grest, Phys. Rev. Lett. 1996, 76, 4979. J. Klein, Colloid Surfaces – Physicochem. Eng. Aspects 1994, 86, 63. J. Klein, E. Kumacheva, D. Perahia, D. Mahalu, S. Warburg, Faraday Disc. 1994, 173. B. D. Ratner, A. S. Hoffmann, F. J. Schoen, J. E. Lemons, Biomaterials Science, An Introduction to Materials in Medicine, Academic Press, San Diego, 1996. E. Ruoslahti, Annu. Rev. Cell Dev. Biol. 1996, 12, 697. K. L. Prime, G. M. Whitesides, J. Am. Chem. Soc. 1993, 115, 10714.
21 J. M. Harris, S. Zalipsky, Poly(ethylene glycol):
Chemistry and Biological Applications, American Chemical Society, Washington DC, 1997. 22 T. Lehmann, J. RPhe, Macromol. Symp. 1999, 142, 1. 23 K. Mathauer, F. Embs, G. Wegner, in: Comprehensive Polymer Science, Vol. 1. Suppl. (Ed.: G. Allen), Pergamon Press, Oxford, 1992, p. 449. 24 Multilayer Thin Films. Sequential Assembly of Nanocomposite Materials (Ed.: G. Decher), Wiley-VCH, Weinheim, 2002. 25 A. Ulman, An Introduction to Ultrathin Organic Films, Academic Press, New York, 1991. 26 Y. N. Xia, G. M. Whitesides, Angew. Chem. Int. Ed. 1998, 37, 551. 27 M. J. Pellerite, E. J. Wood, V. W. Jones, J. Phys. Chem. B 2002, 106, 4746. 28 A. Hozumi, K. Ushiyama, H. Sugimura, O. Takai, Langmuir 1999, 15, 7600. 29 P. W. Hoffmann, M. Stelzle, J. F. Rabolt, Langmuir 1997, 13, 1877. 30 D. Kambhampati, P. E. Nielsen, W. Knoll, Biosensors Bioelectronics 2001, 16, 1109. 31 W. Knoll, M. Zizlsperger, T. Liebermann, S. Arnold, A. Badia, M. Liley, D. Piscevic, F. J. Schmitt, J. Spinke, Colloids Surfaces – Physicochem. Eng. Aspects 2000, 161, 115. 32 K. P. Krenkler, R. Laible, K. Hamann, Angew. Makromol. Chem. 1953, 53, 101. 33 N. Tsubokawa, M. Hosoya, K. Yanadori, Y. Sone, J. Macromol. Sci. – Chem 1990, A27, 445. 34 N. Tsubokawa, A. Kuroda, Y. Sone, J. Polym. Sci. 1989, A27, 1701. 35 H. Ben Ouada, H. Hommel, A. P. Legrand, H. Balard, E. Papirer, J. Colloid Interface Sci. 1988, 122, 441. 36 K. Bridger, B. Vincent, Eur. Polym. J. 1980, 16, 1017. 37 R. Laible, K. Hamann, Adv. Colloid Interface Sci 1980, 13, 65. 38 A. V. Dmitrenko, N. E. Shadrina, S. S. Ivanchev, N. N. Ulinskaya, A. M. Volkov, J. Chromatogr. 1990, 520, 21. 39 K. Hashimoto, T. Fujisawa, M. Kobayashi, R. Yosomiya, J. Macromol. Sci. – Chem 1982, A18, 173.
29
30
Polymer Brushes: On the Way to Tailor-Made Surfaces 40 K. Hashimoto, T. Fujisawa, M. Kobayashi,
41
42 43 44 45 46 47 48 49 50 51
52
53 54 55
56 57 58 59 60 61 62 63 64
R. Yosomiya, J. Appl. Polym. Sci. 1982, 27, 4529. V. I. Trachenko, Y. N. Zil’berman, T. F. Shatskaya, E. G. Pomerantseva, Polym. Sci. USSR 1986, 28, 646. A. Kopf, J. Baschnagel, J. Wittmer, K. Binder, Macromolecules 1996, 29, 1433. R. Zajac, A. Chakrabarti, Physical Rev. E 1995, 52, 6536. H. Ishida, C. H. Chiang, J. L. Koenig, Polymer 1982, 23, 251. S. Naviroj, J. L. Koenig, H. Ishida, J. Macromol. Sci. Physics 1983, B22, 291. A. M. Zaper, J. L. Koenig, Polymer Composites 1985, 6, 156. G. Reiter, Actualite Chimique 2003, 12. G. Reiter, R. Khanna, Phys. Rev. Lett. 2000, 85, 2753. G. Reiter, R. Khanna, Langmuir 2000, 16, 6351. G. Reiter, P. Auroy, L. Auvray, Macromolecules 1996, 29, 2150. K. L. Beers, S. G. Gaynor, K. Matyjaszewski, S. S. Sheiko, M. Moller, Macromolecules 1998, 31, 9413. M. Wintermantel, M. Gerle, K. Fischer, M. Schmidt, I. Wataoka, H. Urakawa, K. Kajiwara, Y. Tsukahara, Macromolecules 1996, 29, 978. Y. Tsukahara, K. Mizuno, A. Segawa, Y. Yamashita, Macromolecules 1989, 22, 1546. S. Alexander, J. Physique 1977, 38, 977. E. B. Zhulina, O. V. Borisov, V. A. Pryamitsyn, T. M. Birshtein, Macromolecules 1991, 24, 140. C. M. Wijmans, J. Scheutjens, E. B. Zhulina, Macromolecules 1992, 25, 2657. S. T. Milner, T. A. Witten, M. E. Cates, Macromolecules 1988, 21, 2610. P. Y. Lai, K. Binder, J. Chem. Physics 1992, 97, 586. S. T. Milner, T. A. Witten, M. E. Cates, Macromolecules 1989, 22, 853. R. Hariharan, C. Biver, J. Mays, W. B. Russel, Macromolecules 1998, 31, 7506. P. Pincus, Macromolecules 1991, 24, 2912. H. Ahrens, S. Forster, C. A. Helm, Phys. Rev. Lett. 1998, 81, 4172. H. Ahrens, S. Forster, C. A. Helm, Macromolecules 1997, 30, 8447. G. Boven, M. Oosterling, G. Challa, A. J. Schouten, Polymer 1990, 31, 2377.
65 G. Boven, R. Folkersma, G. Challa,
A. J. Schouten, Polym. Commun. 1991, 32, 50. 66 T. Stohr, J. Heinz, J. RPhe, Mater. Sci. Eng. C-Biomimetic and Supramolecular Systems 1999, 8-9, 225. 67 T. Stohr, J. RPhe, Macromolecules 2000, 33, 4501. 68 O. Prucker, J. RPhe, Macromolecules 1998, 31, 592. 69 O. Prucker, J. RPhe, Macromolecules 1998, 31, 602. 70 J. RPhe, Macromol. Symp. 1998, 126, 215. 71 M. Biesalski, D. Johannsmann, J. RPhe, Macromol. Symp. 1999, 145, 113. 72 O. Prucker, J. RPhe, Langmuir 1998, 14, 6893. 73 O. Prucker, J. Habicht, I. J. Park, J. RPhe, Mater. Sci. Eng. C-Biomimetic and Supramolecular Systems 1999, 8-9, 291. 74 X. Guo, M. Ballauff, Langmuir 2000, 16, 8719. 75 X. Guo, A. Weiss, M. Ballauff, Macromolecules 1999, 32, 6043. 76 M. Husseman, E. E. Malmstrom, M. McNamara, M. Mate, D. Mecerreyes, D. G. Benoit, J. L. Hedrick, P. Mansky, E. Huang, T. P. Russell, C. J. Hawker, Macromolecules 1999, 32, 1424. 77 M. Husemann, M. Morrison, D. Benoit, K. J. Frommer, C. M. Mate, W. D. Hinsberg, J. L. Hedrick, C. J. Hawker, J. Am. Chem. Soc. 2000, 122, 1844. 78 X. Y. Chen, D. P. Randall, C. Perruchot, J. F. Watts, T. E. Patten, T. von Werne, S. P. Armes, J. Colloid Interface Sci. 2003, 257, 56. 79 C. Perruchot, M. A. Khan, A. Kamitsi, S. P. Armes, T. von Werne, T. E. Patten, Langmuir 2001, 17, 4479. 80 J. B. Kim, W. X. Huang, M. L. Bruening, G. L. Baker, Macromolecules 2002, 35, 5410. 81 W. X. Huang, J. B. Kim, M. L. Bruening, G. L. Baker, Macromolecules 2002, 35, 1175. 82 A. Ramakrishnan, R. Dhamodharan, J. RPhe, Macromol. Rapid Commun. 2002, 23, 612. 83 T. von Werne, T. E. Patten, J. Am. Chem. Soc. 2001, 123, 7497. 84 K. Matyjaszewski, P. J. Miller, N. Shukla, B. Immaraporn, A. Gelman, B. B. Luokala, T. M. Siclovan, G. Kickelbick, T. Vallant,
References H. Hoffmann, T. Pakula, Macromolecules 1999, 32, 8716. 85 M. Ejaz, K. Ohno, Y. Tsujii, T. Fukuda, Macromolecules 2000, 33, 2870. 86 M. Ejaz, Y. Tsujii, T. Fukuda, Polymer 2001, 42, 6811. 87 Y. Tsujii, M. Ejaz, S. Yamamoto, T. Fukuda, K. Shigeto, K. Mibu, T. Shinjo, Polymer 2002, 43, 3837. 88 T. von Werne, T. E. Patten, J. Am. Chem. Soc. 1999, 121, 7409. 89 X. Huang, M. J. Wirth, Macromolecules 1999, 32, 1694. 90 X. Y. Huang, M. J. Wirth, Anal. Chem. 1997, 69, 4577. 91 J. D. Jeyaprakash, S. Samuel, R. Dhamodharan, J. RPhe, Macromol. Rapid Commun. 2002, 23, 277. 92 R. A. Sedjo, B. K. Mirous, W. J. Brittain, Macromolecules 2000, 33, 1492. 93 M. Baum, W. J. Brittain, Macromolecules 2002, 35, 610. 94 M. D. K. Ingall, C. H. Honeyman, J. V. Mercure, P. A. Bianconi, R. R. Kunz, J. Am. Chem. Soc. 1999, 121, 3607. 95 R. Jordan, A. Ulman, J. F. Kang, M. H. Rafailovich, J. Sokolov, J. Am. Chem. Soc. 1999, 121, 1016. 96 B. Zhao, W. J. Brittain, J. Am. Chem. Soc. 1999, 121, 3557. 97 B. Zhao, W. J. Brittain, Macromolecules 2000, 33, 342.
98 B. Zhao, W. J. Brittain, Macromolecules 2000,
33, 8813. 99 J. RPhe, W. Knoll, J. Macromol. Sci. -Polym.
Rev. 2002, C42, 91. 100 M. Biesalski, J. RPhe, Macromolecules 2003,
36, 1222. 101 M. Biesalski, D. Johannsmann, J. RPhe,
J. Chem. Phys. 2002, 117, 4988. 102 M. Biesalski, J. RPhe, Macromolecules 1999,
32, 2309. 103 B. Peng, J. RPhe, D. Johannsmann, Adv.
Mater. 2000, 12, 821. 104 B. Peng, D. Johannsmann, J. RPhe, Macro-
molecules 1999, 32, 6759. 105 S. A. Prokhorova, A. Kopyshev, A. Ramak-
rishnan, H. Zhang, J. RPhe, Nanotechnology 2003, 14, 1098. 106 B. Zhao, W. J. Brittain, W. S. Zhou, S. Z. D. Cheng, J. Am. Chem. Soc. 2000, 122, 2407. 107 S. Minko, D. Usov, E. Goreshnik, M. Stamm, Macromol. Rapid Commun. 2001, 22, 206. 108 A. Sidorenko, S. Minko, K. Schenk-Meuser, H. Duschner, M. Stamm, Langmuir 1999, 15, 8349. 109 O. Prucker, M. Schimmel, G. Tovar, W. Knoll, J. RPhe, Adv. Mater. 1998, 10, 1073. 110 T. A. von Werne, D. S. Germack, E. C. Hagberg, V. V. Sheares, C. J. Hawker, K. R. Carter, J. Am. Chem. Soc. 2003, 125, 3831. 111 R. R. Shah, D. Merreceyes, M. Husemann, I. Rees, N. L. Abbott, C. J. Hawker, J. L. Hedrick, Macromolecules 2000, 33, 597.
31
Part I
Synthesis
35
1
Recent Advances in Polymer Brush Synthesis Anthony M. Granville and William J. Brittain
1.1
Introduction
Recently, the synthesis of polymer brushes has garnered attention, due in part to their unique properties and applications [1–4]. Colloidal stabilization [5], surface property tailoring, “chemical gates” [3], and microlithographic patterning [2] have all been discussed as potential applications for these materials. Polymer brushes can be described as polymer chains tethered to a surface or interface with a sufficiently high grafting density such that the chains are forced to stretch away from the tethering site [6]. The purpose of this introductory chapter is to provide a brief overview of the recent literature on the synthesis of polymer brushes. The chapter is intended to augment previous reviews on polymer brushes [7].
Figure 1.1
Examples of physically attached polymer brushes.
36
1 Recent Advances in Polymer Brush Synthesis
The formation of these tethered chains is generally carried out using either of two techniques, namely physisorption or chemical bonding of chains to an interface. Typically, polymer brushes synthesized using a physisorption approach consists of two-component polymer chains, where one part strongly adheres to the interface and the second part extends to generate the polymer layer [8]. This tethering point can be a single point, in the case of a functionalized polymer chain, or a diblock copolymer chain. Figure 1.1 depicts several examples of physically attached diblock copolymer brushes where the interface tethering varies. Due to the physical nature of the tethering points, the brush layers are rendered thermally and solvolytically unstable, and there is poor control of grafting density. Covalently grafting chains, either by the “grafting to” or “grafting from” technique, to the surface can overcome these shortcomings. In the “grafting to” method (Scheme 1.1), preformed polymer chains containing a suitable end-functionalized group are reacted with a surface to obtain the desired brush [9]. Although the brush layer exhibits thermal and solvolytic stability, it inherently possesses a low grafting density and film thickness on the surface. This observation is due to the inability of large polymer chains to diffuse to the reactive surface sites that are sterically hindered by surrounding bonded chains.
Scheme 1.1 Idealized representation of the “grafting to” (left) and “grafting from” (right) approaches.
Figure 1.2
Examples of chemically attached polymer brushes.
1.2 “Grafting To” Synthesis Technique
In order to circumvent these disadvantages, a “grafting from” technique (Scheme 1.1) is utilized in which the polymer brush layer is generated in situ from a suitable surface immobilized initiator [9]. Due to the small molecule nature of immobilized initiators, which are predominantly formed via a self-assembled monolayer (SAM) containing the desired initiating functionality [10], high grafting densities are easily obtained. Since brush length is directly proportional to polymer brush molecular weight, control over the polymerization would lead to uniform, tunable brush thickness. For the purposes of this review, the scope will be limited to the recent work in the field of covalently bound polymer brush research. Furthermore, the review will focus primarily on polymer brush synthesis from flat and particulate surfaces. The studies into the area of “bottle-brushes” or “molecular brushes” (see Figure 1.2, Polymers from Macromonomers) conducted by several researchers [11–14] will be omitted.
1.2
“Grafting To” Synthesis Technique
As previously described, a preformed macromolecule possessing a suitable endfunctionality is reacted with a reactive substrate to generate the polymer brush in the “grafting to” technique. The synthesis of the polymer chains has been performed using several techniques such as anionic, cationic, living free radical, and ring-opening metathesis polymerization. These techniques in particular allow for the facile conversion of the chain ends to any number of desired functionalities (hydroxyl, carboxyl, amino, thiol, etc.). The polymerization methods also present the added bonus of synthesizing polymer chains possessing narrow molecular weight distributions, which allows for a uniform brush layer thickness. The substrate surface also plays an important role in the synthesis of the polymer brush layers. Silica and gold surfaces possess surface functionalities that can undergo condensation reactions with polymer chains containing thiol, hydroxyl, and carboxyl functionalities. Furthermore, these and other surfaces can be modified by the use of SAMs and other coupling agents to introduce various other surface functionalities. Tran and Auroy [15] anionically polymerized styrene, using sec-butyllithium in benzene, followed by termination with trichlorosilane to generate polystyryl trichlorosilane chains. Once a silicon wafer was coated with the polymer, the film was annealed on the surface at 160 FC to allow the chlorosilane chain ends to react with the hydroxyl surface functionality. The polystyrene brushes were converted to poly(styrene sulfonate) via a soft sulfonation reaction using acetyl sulfate. However, the brush was observed to degraft from the surface either immediately after sulfonation or steadily after the polyelectrolyte was subjected to water treatment. The “grafting to” method has a limited surface grafting density due to the increased steric hindrance of grafted chains. This steric hindrance inhibits diffusion of large free polymer chains to diffuse to open-surface reactive sites and creation of a dense polymer brush layer. It is this low surface density that allowed for small
37
1 Recent Advances in Polymer Brush Synthesis
molecules to migrate to the polymer brush anchoring sites and resulted in brush degrafting. Therefore, these authors backfilled the surface prior to sulfonation with deuterated polystyrene oligomers as a means of consolidating the polymer brush surface and protecting the anchoring sites. Sirard et al. [16] took a similar approach to polymer brush synthesis by spin-coating deuterated poly(dimethylsiloxane) (PDMS) onto silicon wafers containing surface hydroxyl functional groups. The PDMS was obtained commercially, and contained a monofunctional silanol group, which can also undergo condensation with the hydroxyl surface to generate a covalently bound brush. The spin-coated samples were annealed in order to allow for condensation reaction between the chain end and the surface functionalities to occur. As with the studies conducted by Auroy and Tran [15], neutron reflectivity of the polymer brush layer was performed to characterize the brush layer. Minko et al. [17] took a slightly different approach to the synthesis of polymer brushes using the “grafting to” technique first utilized by Luzinov [18]. Both groups first grafted 3-glycidoxypropyl trimethoxysilane (GPS) to silicon wafer substrates. A condensation reaction took place between the alkoxysilane end group and the hydroxyl surface functionality to allow for surface modification of the substrates. However, the nature of the GPS molecules gave rise to several types of surface functionalities (hydroxyl, carboxyl, and epoxide rings; Scheme 1.2).
H3C
OH OH
+ H3C
OH
O Si
O
O
O
O H3C
silica substrate
silica substrate
OH
OH
Si
O
O
O
Si
+
O O
O O
HOOC
OH
O
Si
CH3
O O
OH
O OH Si
O
OH O
O
O Si
O OH
O O
+
OH
O
Si
CH3
O O
HOOC
O
silica substrate
OH
silica substrate
38
Si
O
O O OH
O O
O Si
O
Si
O
OH
O O
O
CH3 O
OH
OH
Scheme 1.2 Schematic representation of the synthesis of binary brushes. PS chains, gray; PVP chains, black [17].
From this modified silica surface, carboxyl-terminated polystyrene (PS) was grafted via a spin-coating/thermal annealing methodology. However, Minko and coworkers then removed ungrafted PS chains using a THF Soxhlet extraction step in order to allow for the subsequent grafting of carboxyl-terminated poly(2-vinylpyridine) (PVP) to the surface. In this manner, they were able to synthesize a binary polymer brush layer where the composition can be controlled through the time and temperature of the grafting at each step. Furthermore, they were able to show through the use of atomic force microscopy (AFM) and X-ray reflectivity that the
1.2 “Grafting To” Synthesis Technique
surface was macroscopically homogeneous yet nanoscopically able to phase segregate. Minko et al. [19] were able to expand on this approach in later investigations by grafting onto other types of substrates. Rather than using silicon wafers with a GPSmodified surface, poly(tetrafluoroethylene) (PTFE) foils were oxygen- and ammonia plasma-treated to yield hydroxy and amino functional groups, respectively. Sequential polymer grafting was carried out with carboxyl-terminated poly(styrene-co-pentafluorostyrene) (PSF) and PVP. The PSF copolymer was synthesized using a 4,4¢-azobis(4-cyanopentanoic acid) free radical initiator, whereas the PVP was anionically polymerized. Control experiments conducted under the same sequential grafting conditions on silicon wafers yielded 3.5 mg m–2 for each polymer, and a total thickness of 7 nm. Surface testing under various solvolytic conditions yielded a tunable surface that was capable of controlled wettability, adhesion, and chemical composition. Finally, a vinyl-terminated polymer chain can be grafted to a surface via a simple addition reaction. Maas et al. [20] studied the effect of hydroxyl and hydride surface functionality on the grafting behavior of two different molecular weight, vinyl-terminated PS chains. When the two different PS chains (20 and 200 monomeric units)
R1
CH2 CH
R1
R2
CH2 CH
O
CH2 H3C
+
N
CH3
S O
CH3 Cl
-
R2
O -
+
Na
poly(sodium 4-styrenesulfonate) [NaPSS]
R1
CH2 CH
R2
CH2 CH
H3C
N
O
CH3
poly(N,N-dimethylacrylamide)
+
N
S O
R2 O
N
CH2 O
C
N
O H3C
[PDMA]
CH2 CH
CH2
C H3C
O CH2 C
CN
C R1
CH3
R1 = C
poly((ar-vinylbenzyl) trimethylammonium chloride) [PVBTAC]
H3C
CH3
S
2
CH3
R2 = S
3
O -
poly(3-[2-(N-methylacrylamido)-ethyldimethylammonio] propane sulfonate)-b-poly(N,N-dimethylacrylamide) [P(MAEDAPS-b-DMA)]
Figure 1.3 Polymer chains synthesized by McCormick [21] and coworkers utilizing aqueous reversible addition-fragmentation chain transfer (RAFT) techniques.
-
O Na+
39
40
1 Recent Advances in Polymer Brush Synthesis
were solution-grafted on hydride surfaces, a negligible brush thickness was seen. This solution grafting to the surface is performed under reflux conditions to allow for the anchoring reaction to occur. However, when the same chains were annealed to the surface after spin coating, a roughly seven-fold increase in brush thickness was obtained with the PS200 sample as compared to the PS20 sample. This same brush layer increase is observed when the chains are grafted to a hydroxyl-modified silica surface. In a recent study, Sumerlin and coworkers [21] grafted a series of polymers onto gold surfaces. These polymers, the structures of which are shown in Figure 1.3, were all synthesized using aqueous reversible addition-fragmentation chain transfer (RAFT) free radical polymerization techniques. The RAFT technique allows for the controlled synthesis of polymers, copolymers, and block copolymers through the equilibrium between dormant and active species in which a dithioester compound acts as a chain transfer agent (Scheme 1.3). S P
A
+
S
kexAB
S C
S
P
PB
C
A
kexAB
ka kf
P
B
Z
Z Monomer
+
Monomer dA
B k frA
B
rB A
S P
A
k ad
S C
BA
PB
Z Scheme 1.3
General reversible addition-fragmentation chain transfer (RAFT) mechanism.
After the polymerizations were completed, the dithioester end-capped polymers were converted to thiol functionalities by addition of NaBH4 in water. This reaction was performed in the presence of the gold substrates so that conversion and surface grafting via the sulfur linkage was a one-step process. The surfaces were characterized using ATR-FTIR, AFM, and water contact angles measurements, which showed the generation of a more hydrophilic surface when compared to the native gold layer. Despite all of the investigations conducted in the field of “grafting to” brush synthesis, there remain inherent disadvantages in this process. As stated earlier, the grafting density of this process is limited by the diffusion of large polymer chains to the reactive sites on the substrate. The low surface coverage, (C, mg m–2) results in lower brush thicknesses (h) as given by Eq. (1) [18], where is the density of the polymer: C=hL
(1)
r = (6.023C L 100) / Mn
(2)
1.3 “Grafting From” Synthesis Technique
The grafting density (r, chains per nm2) is calculated from the surface coverage according to Eq. (2) [19], thus showing that the grafting density decreases as the Mn of the adsorbed chain increases for a constant C. By utilizing a “grafting from” approach, polymer brushes are generated in situ. Thus, rather than having bulky polymer chains diffuse to a reactive site, monomer units migrate to the growing polymer brush layer, resulting in denser and thicker polymer brush layers.
1.3
“Grafting From” Synthesis Technique
Unlike the situation in the “grafting to” technique, the substrate surface must be modified to generate the initiator functionality suitable for the polymer brush synthesis from a surface. This surface modification can be performed using LangmuirBlodgett techniques or SAM deposition. Furthermore, depending on the polymerization method, the initiator can be a free radical, ionic, ring-opening metathesis, or controlled radical polymerization type. By varying the substrate (gold, silicon, nanoparticles, etc.), initiator deposition technique, and polymer synthesis route, virtually limitless possibilities present themselves for brush formation. Biesalski and coworkers [22] used a free radical polymerization approach to synthesize a weak polyacid brush based on methacrylic acid. A SAM containing a monochlorosilane functional group and an azo initiator group (referred to as RNhe’s initiator) was first formed on silica wafers. The polymerizations were carried out in bulk and in 50 vol.% in water at 60 FC. The reaction times, which correlate to polymer conversion, were varied such that the maximum dry polymer brush thickness obtained was 400 nm. Biesalski and RNhe [23] used this same free radical polymerization approach to synthesize a poly(p-styrenesulfonate) brush using a p-styrenesulfonate ethyl ester. Rather than performing a sulfonation reaction to generate the desired polyelectrolyte like Tran and Auroy [15], Biesalski and RNhe performed a saponification. Furthermore, no degrafting was seen when forming the polyelectrolyte, and the brush thickness was as high as 35 nm, compared to roughly 15 nm for the “grafting to” technique. A similar type of azo free radical initiator was employed by Fan and coworkers [24] to synthesize polystyrene brushes from clay nanoparticles. Gold and silicon flat substrates were first cleaned and modified with a SAM to generate a positively charged surface. Montmorillonite clay particles were then deposited onto the surfaces prior to deposition of the azo initiator containing a quarternized amine head group. Upon 8 h polymerization in THF at 60 FC, an 8-nm polystyrene layer on the functionalized clay nanoparticles was observed. “Grafting from” the surface can also be performed using controlled polymerization techniques. By depositing the appropriate initiators, controlled polymerization can lead to uniform brush layers, tunable brush thicknesses via molecular weight control, and the ability to perform sequential polymerization steps to yield either thicker homopolymer layers or diblock copolymer layers. Several groups have performed ring-opening polymerizations (ROP) to generate various polymers from
41
42
1 Recent Advances in Polymer Brush Synthesis
both silica and gold substrates. Zhou [25], Advincula [26], and Quirk [27] have, separately, utilized this approach to synthesize polymer brushes from a 1,1-diphenylethylene (DPE) derivative. Detrembleur and coworkers [28], as well as Moon and Swager [29] and Harada et al. [30], employed a Grubbs catalyst for ring-opening metathesis polymerizations. By depositing a triethoxysilane containing an amine surface functionality, Wieringa et al. [31] were able to synthesize poly(L-glutamate) brushes from silica surfaces. ROP of the N-carboxyanhydrides of c-benzyl and c-methyl L-glutamates were performed in anhydrous DMF. MSller and coworkers [32] deposited a thiol SAM containing a hydroxyl-initiating end to conduct ROP of L-, D-, and L,D-lactides using a tin catalyst system. Unlike the glutamates, these polymerizations were performed in bulk. The work of both Wieringa and MSller consisted of brush re-initiation studies to prove the “living” characteristics of the process. Using a quarternized amine-anchoring group for the initiator, Zhou and coworkers [25] anionically polymerized styrene brushes from clay particles. Rather than first depositing the clay particles onto silica or gold, as did Fan [24], the initiator was directly deposited in an aqueous dispersion. The lithium-derivatized DPE initiator head group was then reacted with styrene, in benzene, to yield the desired brush. However, under similar conditions, polymer that was formed in solution had a lower PDI (polydispersity index) and larger Mn than that cleaved from the clay surfaces. Advincula et al. [26] used a similar DPE derivative initiator, but functionalized it with monochlorosilane and thiol so as to deposit on silica and gold wafers, respectively. From these surfaces, polystyrene brushes were synthesized in benzene with various additives in the reaction [THF, BuOLi, or tetramethylethylenediamine (TMEDA)]. The greatest water contact angle (94F) and brush thickness (23.4 nm) were obtained using s-BuLi to activate the DPE initiator and TMEDA as an additive. From this homopolymer surface, isoprene was polymerized to generate a PS-b-PI diblock copolymer. Typically, homopolymer and diblock copolymer thicknesses were no greater than 25 nm. Perhaps one of the most comprehensive “living” anionic brush synthesis reports was by Quirk and coworkers [27]. A series of homopolymers and diblock copolymers were synthesized via both “grafting from” and “grafting to” using a monochlorosilane DPE derivative. Homopolymer brushes of polystyrene were generated by reacting the DPE surface with poly(styryl)lithium via a “grafting to” technique, or they reacted the DPE surface with butyllithium followed by styrene for the “grafting from” brush. Diblock copolymers of PI-b-PEO were also generated using “grafting from” synthesis of isoprene followed by ethylene oxide when using n-butyllithium to activate the DPE monolayer. This diblock was also synthesized by grafting telechelic PI chains to the surface followed by in-situ polymerization of ethylene oxide from the hydroxyl-terminated PI brush. Grafting density and brush layer thickness was higher for the “grafting from” technique compared to the “grafting to” technique. Ring-opening metathesis polymerization (ROMP) has also been used to generate polymer brushes. Detrembleur and coworkers [28] first polymerized norbornenylmethylene acrylate (NBE-A) from a steel electrode surface using an electrografting process. The norbornenyl functionality was then reacted with a Grubbs’ initiator cat-
1.3 “Grafting From” Synthesis Technique
alyst to generate the ROMP initiator. Norbornene was then polymerized from the acrylate brush to form a thick polynorbornene layer. A similar ROMP of a norbornene-capped poly(p-phenylene ethynylene) macromonomer using a surface-bound Grubbs’ catalyst was performed by Moon and Swager [29] from silica wafers. Harada et al. [30] took an interesting approach to synthesizing polymer brushes of a norbornene derivative from the surface of silica wafers using a ROMP methodology. 7-Octenyltrichlorosilane was deposited on the wafer using a microcontact printing (lCP) approach to generate a SAM surface. This linear vinyl group was then reacted with a Grubbs’ catalyst to afford the appropriate ROMP surface catalyst. However, when subsequent polymerization of 2,2,2-trifluoroethyl bicyclo[2.2.1]hept2-ene-5-carboxylate was performed, low brush thickness was obtained. By lCP a 40:60 (mol%:mol%) 7-octenyltrichlorosilane to octyltrichlorosilane “primer” solution, the vinyl groups were sufficiently dilute along the surface that reactions of the neighboring ROMP surface catalyst was avoided. This primer solution resulted in the thickest polymer brush films in the study. By utilizing a “living” free radical approach, control over brush molecular weight and thickness can be obtained as well as relatively low polydispersity (brush thickness uniformity) and the ability to form diblocks. However, the conditions are more tolerant to impurities than the ionic systems, and some methods are capable of aqueous solution polymerizations. Since the polymerizations utilize a radical approach, the techniques have a wider range of polymerizable monomers available than the anionic or ROMP methods. Controlled radical polymerizations (CRP) can be conducted using iniferters, RAFT, nitroxide-mediated polymerization (NMP), and atom transfer radical polymerization (ATRP), as well as others. An iniferter molecule works on the premise that the molecule decomposes into a highly reactive radical capable of initiation as well as a rather stable counter radical, which predominantly acts as a chain transfer agent and terminating species. In the research performed by de Boer et al. [33], a photoiniferter (decomposition stimulated by UV irradiation) first used by Otsu [34] was deposited on silica wafers via a trimethoxy anchoring group. Synthesis of PS and PMMA homopolymer brushes was successful in addition to diblock copolymer synthesis of PS-b-PMMA. By etching the silica surfaces with chromium prior to initiator deposition, surface patterning was accomplished. Baum and Brittain [35] were able to synthesize both PMMA and PS brushes, in addition to PDMA brushes, utilizing a RAFT synthesis scheme from silica substrates. RNhe’s azo initiator was first deposited on silica surfaces, and 2-phenylprop2-yl dithiobenzoate was used as the RAFT chain transfer agent. 2,2¢-azobis isobutyronitrile (AIBN) was used in the polymerizations to act as free initiator for the polymerizations. This polymer generated in solution was found to correlate well with the degrafted brush chains when analyzed using gel-permeation chromatography. Along with the homopolymer brushes, diblock copolymer brushes of PS-b-PDMA and PDMA-b-PMMA were synthesized. Rather than synthesizing PDMA brushes, Hu and coworkers [36] polymerized N-isopropylacrylamide (NIPAM) using RAFT. Also, the brush formation was on the surface of spherical poly[NIPAM-co-acrylic acid(2-hydroxyethyl ester)] microgel particles. The surface-bound initiator used was a-butyl acid dithiobenzoate along with AIBN free initiator in THF solution.
43
44
1 Recent Advances in Polymer Brush Synthesis
kact PA
O
NR2
PA
kdeact
+
O
NR2
kp n M Scheme 1.4
General nitroxide-mediated polymerization (NMP) reaction scheme.
Rather than utilizing a chain transfer agent, nitroxide-mediated polymerization (NMP) decreases the propagating radical lifetime by reversibly coupling and decoupling from the chain end (Scheme 1.4). Parvole et al. [37] used this methodology to generate polyacrylate brushes on silica particles. First, an azo initiator was deposited on the silica surfaces using a triethoxy silane-anchoring site. From the surfacebound initiator, n-butylacrylate and ethylacrylate were separately polymerized from the surface in the presence of a monofunctional alkoxyamine or counter-radical/ AIBN (see Figure 1.4). AIBN was used to build up the concentration of initiator with respect to monomer to allow for a well-controlled system. CH3
CH3 CH3
O
O
N
CH3 CH3
CH3 O
CH3
CH3
O
H3C
H3C
H3C H3C
O O
O
P
O
H3C
CH3
P
N
O Et
Et
O Et
Et
Parvole's alkoxyamine initiator
Parvole's counter-radical control agent used with AIBN
H3C
CH3
O OEt O EtO
Si
N
O H3C
OEt
Devaux's surface NMP initiator
Figure 1.4 Examples of nitroxide-mediated polymerization (NMP) counter-radical chemical structures [37–39].
CH3
1.3 “Grafting From” Synthesis Technique
Devaux and coworkers [38,39] utilized a surface-bound TEMPO-type NMP initiator to graft styrene from the surface of both flat silica and AFM tips (Figure 1.4). For both studies, the initiator was deposited using a Langmuir-Blodgett technique in order to control the initiator layer density. After deposition, the surfaces were thermally treated to promote initiator self-condensation and chemisorption of the chains to the surface. Polymerizations of styrene were conducted from both surfaces using a 50/50 (v/v) solution of styrene in xylene at 130 FC. Free initiator, TEMPO, was used to establish the monomer/initiator reaction equilibrium ratio and effectively control the surface polymerization. A unique method of generating patterned polymer brushes was employed by von Werne et al. [40] and utilizes several different controlled radical polymerization techniques. In the first step, nanocontact printing and UV curing of a spin-coated network photopolymer resin is performed to generate a pattern on the substrate. The photopolymer contains an imbedded inimer (initiator/monomer single molecule), which is later used to graft brushes from the surface thereby increasing the feature size of the pattern. The two inimers used contained functionalities capable of NMP and ATRP controlled reactions (Figure 1.5). The NMP inimer was used to synthesize polystyrene brushes from the surface, while the ATRP inimer was applied in the synthesis of PS, PMMA, and poly(2-hydroxyethyl)methacrylate (PHEMA) brushes. Similar to NMP, atom transfer radical polymerization (ATRP) works on the premise of reversibly terminating growing chain ends. Unlike NMP, the capping group is not a stable free radical but rather a halogen group (labeled X in Scheme 1.5). The halogen is reversibly transferred from the deactivated chain end to a metal halide
H3C Br
CH3 CH3
CH3 N
H3C
H3C
O
O O
CH3
H3C
O O
O CH2 H3C
CH2 O CH3
ATRP inimer
NMP inimer
Figure 1.5 Controlled radical polymerization (CRP) inimers utilized by von Werne and coworkers [40].
45
46
1 Recent Advances in Polymer Brush Synthesis
+
Polymer-X
kact
Mtn-X/Ligand
+
Polymer kdeact
Mtn+1-X2/Ligand kterm dead polymer
kp Monomer General atom transfer radical polymerization (ATRP) reaction mechanism.
Scheme 1.5
catalyst. Typically, the metal catalyst is copper-based, but can also be nickel, ruthenium, and iron to name a few. As with NMP, the equilibrium for this reaction lies strongly towards the dormant/deactivated chain end, thereby lowering the radical concentration and minimizing termination. Mori and coworkers [41] used an a-bromoester ATRP surface-bound initiator to polymerize brushes from silica wafers. The monomers used were methyl methacrylate and tert-butylacrylate. Two inimers were also polymerized (BPEA and BIEM; Figure 1.6) in order to synthesize hyperbranched polymer brushes in a controlled manner. Also, as a means for decreasing the branching, the inimers were copolymerized with their linear analogues, acrylic or methacrylic monomers. O
CH3
O
O
H2C
CH3
O
Br O
O
Br
CH3
BPEA Figure 1.6
CH3
O
H2C
O
BIEM
Inimers utilized for hyperbranched polymer brush synthesis.
In the above investigations, sacrificial free initiator was used to set up the ATRP equilibrium and thereby lead to the controlled polymerization. In surface-bound ATRP, the reaction equilibrium can also be established by the addition of deactivator species (Mtn+1-X2 species in Scheme 1.5). The effects of such changes to the brush synthesis were studied by Jeyaprakash and coworkers [42]. Polystyrene brushes were grown from silicon surfaces using various [styrene]0/[CuBr]0 ratios and using CuBr2. The thickest polymer brushes, when comparing the same polymerization times, were obtained at lower ratios. These results were then compared to those from experiments using sacrificial initiator instead of CuBr2 in the reaction mixture. For each trial, the corresponding deactivator system led to higher film thicknesses than the sacrificial initiator analogue. However, the use of a sacrificial initiator leads to the generation of free polymer, which has been shown to correlate well with the molecular weight of the polymer brush [43]. Using a sacrificial initiator, Ohno et al. [44] synthesized PMMA brushes from gold nanoparticles. The sacrificial initiator used was ethyl 2-bromoisobutyrate
1.3 “Grafting From” Synthesis Technique
Cl OH
+
Cl
H3C Si
CH3
dry toluene
O
60 oC, 4 h
Br
CH2
Cl
silica substrate
silica substrate
(E2BriB), which was of the same initiating species as the surface-bound initiator. Since the anchoring group to the gold nanoparticle consisted of thiol groups, which are known to be thermally unstable, the polymerization reaction was performed at 40 FC. Jones and Huck [45] utilized a similar ATRP initiator that was deposited on gold through a microcontact printing process to generate a patterned surface. Polymerization of various acrylate monomers (MMA, glycidyl methacrylate, n-butylacrylate, and HEMA) was conducted under aqueous (water/methanol) ATRP conditions. Diblock copolymer brushes of PMMA-b-PHEMA were also synthesized. ATRP, being a radical process, is tolerant to impurities and solvents; aqueous polymerizations are also possible and have even been shown to be faster than their organic solvent counterparts. This group has extended this aqueous ATRP synthesis process to generate polyelectrolyte [1] and thermoresponsive poly(N-isopropylacrylamide) [46] brushes. More recently, Kizhakkedathu and Brooks [47] performed aqueous ATRP to form poly(N,N-dimethyacrylamide) (PDMA) from PS latex particles. The particles contained a chlorinated inimer (chlorinated version of BPEA; Figure 1.6) to initiate the CuCl-catalyzed ATRP reaction. Boyes and coworkers [4] synthesized ABA-type triblock copolymers from silicon wafers. Using a bromoisobutyrate initiator bound to the surface as a SAM, PS-bPMA-b-PS and PMA-b-PS-b-PMA triblock copolymer brushes were synthesized.
11
O
O O
H3C
Si
CH3
O CH2
O
Br 11
O
styrene, anisole CuBr, PMDETA
O O
H3C
Si
CH3
methyl acrylate, anisole
O CH2
O
CH2 CH
Br
CuBr, PMDETA
n
11
O
90-100 oC, 24h
silica substrate
silica substrate
90-100 oC, 24h
O O
H3C
Si
CH2 CH
CH2 O
CH3
O CH2 CH n
11
O
styrene, anisole CuBr, PMDETA silica substrate
90-100 oC, 24h O O
H3C
CH2 CH
CH2 O
CH3
O
Si
m
p
O O
Scheme 1.6
Br
CH2 CH
CH2 CH n
11
Br m
O
OMe
Synthesis of ABA triblock copolymer brush, PS-b-PMA-b-PS.
OMe
47
48
1 Recent Advances in Polymer Brush Synthesis
Scheme 1.6 depicts the general triblock copolymer synthesis reactions to form the PS-b-PMA-b-PS brush. The synthesis was characterized using ellipsometry to measure the sequential brush thickness and ATR-FTIR spectroscopy. Finally, Balamurugan et al. [48] synthesized poly(N-isopropylacrylamide) brushes on gold substrates using ATRP in DMF. The metal halide was a CuBr system, and no sacrificial initiator or deactivator metal was added to the reaction solution. Furthermore, the ATRP reaction was carried out at room temperature and resulted in thick (~51 nm) polymer brushes. The surfaces were further characterized using contact angle measurements and surface plasmon resonance in addition to the thermal response studies on the lower critical solution temperature transitions of the polymer.
Summary
In summary, a number of recent advances in the field of polymer brush synthesis have been described in this chapter. Whether utilizing a “grafting to”, “grafting from”, or a combination of the two approaches, polymer brushes are being formed of various sizes, structures, and compositions. Although they are formed predominantly on either gold or silicon substrates, this field is constantly expanding to introduce such brushes onto latex particles, PDMS films, carbon nanotubes, and a wealth of other materials. With the ability to polymerize these materials by using any process, the possible combinations of substrate, synthesis approach, and polymerization route are providing numerous opportunities.
References
References 1 V. L. Osborne, D. M. Jones, W. T. S. Huck, 2 3 4
5 6 7 8 9 10 11 12 13 14
15 16
17
18
19
20
21
Chem. Commun. 2002, 1838–1839. X. Kong, T. Kawai, J. Abe, T. Iyoda, Macromolecules 2001, 34, 1837–1844. Y. Ito, S. Nishi, Y. S. Park, Y. Imanishi, Macromolecules 1997, 30, 5856–5859. S. G. Boyes, W. J. Brittain, X. Weng, S. Z. D. Cheng, Macromolecules 2002, 35, 4960–4967. M. Mayes, S. K. Kumar, MRS Bull. 1997, 22 (1), 43–47. S. T. Milner, Science 1991, 251, 905–914. B. Zhao, W. J. Brittain, Prog. Polym. Sci. 2000, 25, 677–710. G. F. Belder, G. ten Brinke, G. Hadziioannou, Langmuir 1997, 13, 4102–4105. P. Mansky, Y. Liu, E. Huang, T. P. Russell, C. Hawker, Science 1997, 275, 1458–1460. O. Prucker, J. RNhe, Macromolecules 1998, 31, 592–601. I. Potemkin, A. R. Khokhlov, P. Reineker, Eur. Phys. J. E: Soft Matter 2001, 4, 93–101. R. Choi, H. K. Cho, H. A. Chun, S. T. Noht, Polymer(Korea), 2000, 24, 488–498. S. Qin, K. Matyjaszewski, H. Xu, S. S. Sheiko, Macromolecules 2003, 36, 605–612. Matyjaszewski, S. Qin, J. R. Boyce, D. Shirvanyants, S. S. Sheiko, Macromolecules 2003, 36, 1843–1849. Y. Tran, P. Auroy, J. Am. Chem. Soc. 2001, 123, 3644–3654. S. M. Sirard, R. R. Gupta, T. P. Russell, J. J. Watkins, P. F. Green, K. P. Johnston, Macromolecules 2003, 36, 3365–3373. S. Minko, S. Patil, V. Datsyuk, F. Simon, K.-J. Eichhorn, M. Motornov, D. Usov, I. Tokarev, M. Stamm, Langmuir 2002, 18, 289–296. Luzinov, D. Julthongpiput, H. Malz, J. Pionteck, V. V. Tsukruk, Macromolecules 2000, 33, 1043–1048. S. Minko, M. MNller, M. Motornov, M. Nitschke, K. Grundke, M. Stamm, J. Am. Chem. Soc. 2003, 125, 3896–3900. H. Maas, M. A. Cohen Stuart, A. B. Sieval, H. Zuilhof, E. J. R. Sudholter, Thin Solid Films 2003, 426, 135–139. B. S. Sumerlin, A. B. Lowe, P. A. Stroud, P. Zhang, M. W. Urban, C. L. McCormick, Langmuir 2003, 19, 5559–5562.
22 Biesalski, D. Johannsmann, J. RNhe, J. Chem.
Phys. 2002, 117, 4988–4994. 23 Biesalski, J. RNhe, Macromolecules 2003, 36,
1222–1227. 24 X. Fan, C. Xia, T. Fulghum, M.-K. Park,
J. Locklin, R. C. Advincula, Langmuir 2003, 19, 916–923. 25 Q. Zhou, X. Fan, C. Xia, J. Mays, R. Advincula, Chem. Mater. 2001, 13, 2465–2467. 26 R. Advincula, Q. Zhou, M. Park, S. Wang, J. Mays, G. Sakellariou, S. Pispas, N. Hadjichristidis, Langmuir 2002, 18, 8672–8684. 27 R. P. Quirk, R. T. Mathers, T. Cregger, M. D. Foster, Macromolecules 2002, 35, 9964– 9974. 28 C. Detrembleur, C. JWrXme, M. Claes, P. Louette, R. JWrXme, Angew. Chem. Int. Ed. 2001, 40, 1268–1271. 29 H. Moon, T. M. Swager, Macromolecules 2002, 35, 6086–6089. 30 Y. Harada, G. S. Girolami, R. G. Nuzzo, Langmuir 2003, 19, 5104–5114. 31 R. H. Wieringa, E. A. Siesling, P. F. M. Geurts, P. J. Werkman, E. J. Vorenkamp, V. Erb, M. Stamm, A. J. Schouten, Langmuir 2001, 17, 6477–6484. 32 MSller, F. Nederberg, L. S. Lim, R. KYnge, C. J. Hawker, J. L. Hedrick, Y. Gu, R. Shah, N. L. Abbot, J. Polym. Sci., Polym. Chem. Ed. 2001, 39, 3529–3538. 33 B. de Boer, H. K. Simon, M. P. L. Werts, E. W. van der Vegte, G. Hadziioannou, Macromolecules 2000, 33, 349–356. 34 T. Otsu, M. Yoshida, Makromol. Chem. Rapid Commun. 1982, 3, 127–140. 35 Baum, W. J. Brittain, Macromolecules 2002, 35, 610–615. 36 T. Hu, Y. You, C. Pan, C. Wu, J. Phys. Chem. B 2002, 106, 6659–6662. 37 J. Parvole, L. Billon, J. P. Montfort, Polym. Int. 2002, 51, 1111–1116. 38 C. Devaux, J. P. Chapel, E. Beyou, Ph. Chaumont, Eur. Phys. J. E 2002, 7, 345–352. 39 C. Devaux, J. P. Chapel, Eur. Phys. J. E 2002, 10, 77–81. 40 T. A. von Werne, D. S. Germack, E. C. Hagberg, V. V. Sheares, C. J. Hawker, K. R. Carter, J. Am. Chem. Soc. 2003, 125, 3831–3838. 41 H. Mori, A. BSker, G. Krausch, A. H. E. MNller, Macromolecules 2001, 34, 6871–6882.
49
50
1 Recent Advances in Polymer Brush Synthesis
42 J. D. Jeyaprakash, S. Samuel, R. Dhamod-
46 D. M. Jones, J. R. Smith, W. T. S. Huck,
haran, J. RNhe, Macromol. Rapid Commun. 2002, 23, 277–281. 43 Ejaz, Y. Tsujii, T. Fukuda, Polymer 2001, 42, 6811–6815. 44 K. Ohno, K. Koh, Y. Tsujii, T. Fukuda, Macromolecules 2002, 35, 8989–8993. 45 D. M. Jones, W. T. S. Huck, Adv. Mater. 2001, 13, 1256–1259.
C. Alexander, Adv. Mater. 2002, 14, 1130– 1134. 47 J. N. Kizhakkedathu, D. E. Brooks, Macromolecules 2003, 36, 591–598. 48 S. Balamurugan, S. Mendez, S. S. Balamurugan, M. J. O’Brien II, G. P. LZpez, Langmuir 2003, 19, 2545–2549.
51
2
Polymer Brushes by Atom Transfer Radical Polymerization Jeffrey Pyun, Tomasz Kowalewski, and Krzysztof Matyjaszewski
Abstract
Atom transfer radical polymerization (ATRP) is a robust method for the preparation of well-defined (co)polymers. This process has also enabled the preparation of a wide range of molecular brushes where (co)polymers of precise molar mass, composition, and architecture are covalently attached to either curved or flat surfaces. In this chapter, the general methodology for the synthesis of polymer brushes from flat surfaces, polymers and colloids is summarized, focusing on reports using ATRP. Additionally, the nanoscale structure and organization of ultrathin films formed by polymer brushes is discussed based on their characterization with atomic force microscopy (AFM) and other techniques.
2.1
Introduction
Polymer brushes are defined as dense layers of chains confined to a surface or interface where the distance between grafts is much less than the unperturbed dimensions of the tethered polymer. Due to the high steric crowding, grafted chains extend from the surface, thus residing in an entropically unfavorable conformation. Polymer brushes have been prepared by the end-grafting of chains to flat, or curved surfaces that are either organic, or inorganic in nature. These include functional colloids, highly branched polymers and block copolymer aggregates, such as micelles or phase-separated nanostructures [1,2]. This chapter focuses on polymer brushes that have been synthesized using atom transfer radical polymerization (ATRP). Since initial reports of this work in 1998 from flat silicon wafers [3], surface-initiated ATRP has also been performed from flat gold surfaces [4–8], inorganic particles/colloids, organic latexes [9–16], nanopatterned networks [17], dendrimers [18–22], and highly functional linear polymers [23–31] (Scheme 2.1). The characterization of nanoscale features in these materials was performed using various techniques. Atomic force microscopy (AFM) proved to be a particularly useful tool, owing to its ability to visualize individual macromole-
52
2 Polymer Brushes by Atom Transfer Radical Polymerization
cules [32,33] and phase-separated domains. Here, we focus on developments from our own investigations to discuss key steps in preparing brushes on a wide range of substrates and dimensions. Complementary general information on polymer brushes can be found in recent reviews, which cover also the use of other controlled/living radical processes, such as nitroxide mediated polymerizations (NMPs) [34] and reversible addition-fragmentation transfer polymerization (RAFT) [35].
Scheme 2.1 Examples of polymer brushes synthesized by ATRP using the “grafting from” approach from various functional substrates such as flat wafers, particles, colloids, and polymers (X = halogen).
2.2
Polymer Brushes on Flat Surfaces
Dense brush layers on flat wafers and surfaces are among the most extensively investigated systems, owing to potential applications in advanced microelectronics and biotechnology. Brushes on flat surfaces provide an excellent system to combine both “top-down” and “bottom-up” approaches, since the nanoscale organization and functionality of tethered polymers can be directed by techniques such as photolithography [36], micro- [37] and nano-contact [17] printing. Fundamental investigations into the parameters affecting surface-initiated ATRP have been focused on exploring the conditions for controlling film thickness, functionality and properties. Recent studies have also demonstrated the ability to control grafted polymer architecture ranging from tethered linear and hyperbranched [38] polymers to network crosslinked films [5]. In the characterization of these systems, techniques such as ellipsometry, contact angle, X-ray photoelectron spectroscopy (XPS) and AFM are
2.2 Polymer Brushes on Flat Surfaces
central in assessing whether tethered (co)polymers obtained from surface-initiated ATRP possess precise molar mass and composition. 2.2.1
Controlled ATRP from Flat Surfaces
As pointed out previously, the main challenge in ATRP from flat surfaces with very low concentrations of initiating groups stems from the fact that after halogen atom transfer to the transition metal catalyst, the concentration of persistent radical (deactivator) may be too low to reversibly trap the propagating radicals, leading to uncontrolled chain growth. This challenge can be effectively addressed through the addition of persistent radical (deactivator), or “sacrificial initiator” at the beginning of the reaction. Addition of Persistent Radical (Deactivator) As predicted from the Persistent Radical Effect [39–41], the addition of radical deactivating complexes (e.g., Cu(II), Fe(III), etc. halides) at the beginning of the reaction facilitates exchange reactions between active radicals and dormant oligo/polymeric halides. The ATRP of styrene (S) and methyl acrylate (MA) in the presence of externally added Cu(II) complexes resulted in a progressive increase in brush film thickness with time, as determined using ellipsometry [42]. Systematic studies of the effect of both Cu(I) and Cu(II) concentrations on surface-initiated ATRP from flat wafers have been conducted. In a study conducted by Baker and Bruening et al. [8], the kinetics of MA ATRP from Au-coated wafers was investigated by precise variation of the concentration of Cu(I) complexes from 40 mM to 2.5 G 10–4 mM and determining its effect on the controlled brush growth. Optimal conditions for sustained increases in brush thickness were achieved at a Cu(I) concentration of 0.1 mM. In these experiments, the MA concentration was held at 2 M (solution in acetonitrile), and all catalyst systems used tris[2-(dimethylamino)ethyl]amine as the ligand, with the Cu(II) concentration kept at 30 mol% relative to complexes [43]. These results indicate that excessive termination reactions of surface-bound radicals can still occur in the presence of deactivator, if the overall Cu(I) concentration is too high. Thus, controlled growth can also be achieved by dilution of the catalyst, where the concentration of the monomer is varied, as shown by Wirth et al. [44], for the ATRP of acrylamides from Si wafers. 2.2.1.1
2.2.1.2 Addition of “Sacrificial Initiator” The addition of untethered small molecule initiators to ATRP mixtures with functional flat substrates serves a number of beneficial purposes in both synthesis and characterization of polymer brushes, as demonstrated by Fukuda et al. [3], and Hawker et al. [45]. In systems with added free initiator, sufficient concentrations of persistent radical (deactivator) are generated by the termination of radicals formed in solution. Furthermore, the final degree of polymerization (DP) of tethered chains on surfaces can be dictated by the concentration of sacrificial initiator added at the initial stages of the polymerization. The determination of both monomer conversion
53
54
2 Polymer Brushes by Atom Transfer Radical Polymerization
and molar mass of polymers in the system is also greatly facilitated, as an analysis of free polymers formed in solution can be performed by using standard techniques, such as 1H NMR, gas chromatography (GC), and size-exclusion chromatography (SEC). An important fundamental question in these systems is whether tethered polymers on surfaces possess similar molar masses and polydispersity to polymers formed from sacrificial initiators. Although the molar masses of tethered polymers from brushes and free polymers prepared by ATRP in the presence of sacrificial initiator have not yet been compared, SEC analysis of cleaved polymers from brushes prepared using NMPs showed that cleaved chains from surfaces had similar molar masses and polydispersities to polymers formed in solution [46]. 2.2.1.3 Effect of Initiator Coverage The conformation of tethered chains and film thickness in polymer brush layers are directly affected by surface coverage of initiating groups on the flat surface. Ellipsometry measurements in the dry state of polymer brushes on Si wafers revealed that silane coupling agents with long spacers yielded brushes with a lower grafting density of tethered chains. The use of Langmuir-Blodgett techniques enabled the deposition of tightly packed monolayers of initiators onto native oxide of Si wafers which, after ATRP of methyl methacrylate (MMA), formed brushes with a very high grafting density and caused tethered chains to reside in a highly extended conformation [3]. Controlled variation of initiator coverage of flat surfaces has been conducted by photodecomposition of a dense functional monolayer [47] or by dilution of grafted initiators via blending with coupling agents inactive in ATRP [48,49]. From these approaches, polymer brushes with tunable film thickness were synthesized. The effect of varying initiator concentrations and grafting density on the conformation of tethered polymers has been investigated using a number of characterization techniques to study the conformation and properties of brushes, both in solvent-swollen and dry states [47,50–52]. As discussed in Section 2.2.3, effects similar to those associated with a low concentration of tethered initiator can be achieved by grafting polymers onto various substrates, to provides a lower density of surface coverage. 2.2.2
Block Copolymer Brushes on Flat Surfaces
The preparation of block copolymer brushes using a “grafting from” ATRP approach was first reported by tethering polystyrene-block-poly(t-butyl acrylate) (pS-b-ptBA) to Si wafers. Hydrolysis of the t-butyl groups yielded a polystyrene-block-poly(acrylic acid) brush, and demonstrated a versatile approach to tune film properties and wettability [42]. Novel block copolymer brushes have been synthesized using sequential ATRP from wafers possessing amphiphilic di- and triblock copolymers tethered to various substrates (e.g., Si, Au) [6,7,53]. The synthesis of stimulus-responsive brushes has also been achieved by the immobilization of di- and triblock copolymers via sequential surface-initiated polymerizations [54–59]. The ability to control conformation and rearrangement of teth-
2.2 Polymer Brushes on Flat Surfaces
ered block copolymers has been shown directly to affect both the morphology and properties of the ultrathin film. As first demonstrated by Brittain and Cheng et al. [56], the morphology of pS-b-pMMA block copolymer brushes can be reversibly controlled by treatment with selective solvents, such as dichloromethane, or dichloromethane-cyclohexane mixtures. This work has also been extended to triblock copolymer brushes composed of tethered pS-b-pMA-b-pS and pMA-b-pS-b-pMA copolymers [59]. A key lesson learned from these solvent-selective ultrathin films is that in order to exhibit distinct morphological differences due to stimulus-driven rearrangement, in addition to appropriate compositions, copolymer brushes must possess sufficient conformational freedom. This important observation prompted us to design a stimulus-responsive brush utilizing a “grafting to” approach of a functional ABC triblock copolymer. Due to the lower grafting densities inherent to this synthetic method, tethered copolymers retained adequate degrees of freedom enabling segment selective reactions to various solvents. 2.2.3
Stimuli-Responsive Ultrathin Films from “Grafting To” Approach
The synthesis of a reactive ABC triblock copolymer precursor was conducted with a combination of living anionic ring-opening and atom transfer radical polymerizations [60,61]. In the first step, a polydimethylsiloxane (pDMS) macroinitiator (Mn SEC = 6200; Mw/Mn = 1.19) was prepared by the living anionic ring-opening polymerization and hydrosilation of the silane end-group with an alkyl halide functional alkene. Chain extension from the pDMS macroinitiator using ATRP yielded a pDMS-b-pS diblock copolymer (Mn = 66 730; Mw/Mn = 1.38). A final ATRP step using the diblock copolymer macroinitiator with 1-(dimethoxymethylsilyl)propyl acrylate (DMSA) yielded a triblock copolymer (Mn NMR pDMS-b-pS-b-pDMSA = 156 700) capable of covalent bonding to a silicon wafer while also containing rubbery and glassy segments (Scheme 2.2). Surface properties of the copolymer ultrathin films could be reversibly controlled to present either pS or pDMS segments by treatment with toluene, or a mixture of toluene/hexane. Tapping-mode AFM observations revealed that the surfaces of brush films immersed in a good solvent for both segments (toluene) and subsequently dried under a stream of nitrogen exhibited fractal morphology characteristic for glassy polymers. This result indicated that pS segments were predominantly presented at the surface. In contrast, the surfaces of brush films exposed to toluene/ hexane mixtures and dried under nitrogen, were completely featureless under ultralight tapping conditions (A/Ao ! 1, where A and Ao denote, respectively the setpoint and “free” cantilever oscillation amplitude). This suggested that, following treatment with the solvent of lower affinity towards pS, “soft” pDMS segments were preferentially segregating to the surface. Upon switching to “normal” tapping conditions (A/Ao = 0.9), the globular morphology, consistent with the presence of collapsed glassy pS domains under the PDMS layer, was observed (Figure 2.1).
55
56
2 Polymer Brushes by Atom Transfer Radical Polymerization
Tapping-mode AFM height images of pDMS-b-pS-bpDMSA brushes after the following treatments. (left) After immersion in toluene and drying with nitrogen; (right) after immersion in toluene, gradual addition of hexane and drying with nitrogen [61].
Figure 2.1
2.3 Polymer Brushes from Particles
Scheme 2.2 Synthesis of ABC triblock copolymer of pDMS-b-pS-b-pDMSA using living anionic polymerization and ATRP. PDMS macroinitiator (Mn SEC = 6200; MW/Mn = 1.19) chain
extended with Sty using ATRP. PDMS-b-pS (Mn SEC = 66 730; MW/Mn = 1.38) chain extended with DMSA to prepare surface reactive triblock copolymer (Mn NMR = 156 700) [61].
2.3
Polymer Brushes from Particles
The synthesis of brushes on particle surfaces has been widely conducted to prepare solid supports [62,63], chromatographic stationary phases [64–67], or high surface area models for brushes on flat surfaces [45,68–70]. Brushes were grown by surfaceinitiated ATRP, from organic latex colloids emulsion [9,12–14,71–73] shells of shellcrosslinked micelles [74,75], and from functionalized inorganic particles, such as silica [38,44,45,64,65,68–70,76–86], gold [87,88], alumina [89], polysilsesquioxane [90],
57
58
2 Polymer Brushes by Atom Transfer Radical Polymerization
titanium oxide clusters [91,92], iron oxides [93] and germanium [94]. Herein, we focus on the ATRP synthesis of spherical brushes from functionalized nanoparticles serving as colloidal initiators. 2.3.1
Spherical Brushes from Inorganic Colloids
Organic/inorganic hybrid nanoparticles containing an inorganic core and tethered glassy or rubbery homopolymers have been prepared by the ATRP of styrene and (meth)acrylates from colloidal initiators. One particularly interesting aspect of such spherical brushes is the possibility to achieve a high grafting density of polymer chains owing to the high curvature of nanoparticle surfaces. In addition, the use of preformed, colloidal initiators opens the way to the systematic control of the brush length by changing the ratio of monomer to initiating sites ([M]o/[I]o), while maintaining a core of static dimensions. In the synthesis of silica-graft-polystyrene (SiO2g-pS) spherical brushes, the ATRP of S was performed using 2-bromoisobutyrate functional silica colloids targeting varying DP of tethered chains. SiO2-g-pS hybrid nanoparticles possessing molar masses of tethered pS in the range of Mn = 5000 to 33 000 g mol–1 were prepared and characterized both in the solid state and in solution using transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. TEM images of SiO2-g-pS colloids revealed the formation of (sub)monolayer patches with interparticle spacing increasing with the increase of tethered pS molar mass (Figure 2.2). Comparison of hydrodynamic radii (Rh) for hybrid nanoparticles of varying size determined by DLS in toluene, versus molar masses (Mn) of pS chains cleaved from colloids determined by SEC, revealed a linear relationship (Figure 2.2). Such linear dependence of Rh versus Mn is a strong indication that when the particles are dispersed in toluene, the tethered chains adopt highly extended conformations, presumably due to steric interactions caused by the high grafting density [85]. 2.3.2
Multilayered Core-Shell Colloids
Block copolymers containing both glassy and rubbery segments grafted to inorganic core by consecutive ATRP of styrene and (meth)acrylates (Scheme 2.3) provide an example of multilayered core-shell colloids. Polysilsesquioxane-graft-(polystyreneblock-poly(benzyl acrylate)) (SiO1.5-g-(pS-b-pBzA)) hybrid nanoparticles with approximately 1000 grafted chains were prepared by ATRP [90]. Spherical block copolymer brushes were also prepared from 2-bromoisobutyrate functional silica colloids (Deff = 20 nm) using various combinations of S, MMA and n-butylacrylate (BA) [95]. For block copolymer brushes from SiO1.5 or SiO2 cores, destruction of the interior and recovery of cleaved copolymers enabled evaluation of molar mass and polydispersity using SEC. Cleaved blocks from both SiO1.5-g-(pS-b-pBzA) and SiO2-g-(pBAb-pMMA) had higher polydispersities than macroinitiator precursors (Mn pS-b-pBzA = 26 760, Mw/Mn = 1.48; Mn pBA-b-pMMA = 14 190, Mw/Mn = 3.10). Higher polydispersi-
2.3 Polymer Brushes from Particles
Figure 2.2 Left: Transmission electron microscopy (TEM) images of SiO2 colloidal initiator and SiO2-g-PS hybrid nanoparticles (Mn, tethered pS = 5230, 14 960, 32 670 g mol–1), black bar =
100 nm. Right: Plot of hydrodynamic radius (Rh in toluene, 25 AC) of SiO2-g-PS versus molar mass of cleaved pS determined by size-exclusion chromatography [85].
ties obtained in sequential surface-initiated ATRP originate from intramolecular termination of neighboring tethered (oligo)polymeric radicals. However, due to the large number of tethered chains per particle (approximately 1000 chains), a significant retention of active macroinitiator sites enabled incorporation of well-defined
59
60
2 Polymer Brushes by Atom Transfer Radical Polymerization
Scheme 2.3 General methodology for the preparation of core-shell colloids. Sequential ATRP of selected monomers from functional particles, or colloids.
outer blocks to colloidal initiators possessing tethered homopolymers. In SEC chromatograms, terminated tethered chains formed low molar mass tails, which comprised less than 15 wt.% of the entire molar mass distribution. SEC peaks and corresponding molar masses of the main product were as follows: Mn peak pS-b-pBzA = 34 810, Mw/Mn = 1.22; Mn peak pBA-b-pMMA = 39 130, Mw/Mn = 1.29. a)
b)
Figure 2.3 (a) Tapping-mode AFM height image of SiO2-g-(pBA94-bpMMA352) core-shell colloid with rubbery inner segment and glassy outer shell. (b) Height image of same region as for (a) SiO2-g-(pBA94-bpMMA352) ultrathin
films imaged with increasing applied tapping force. Regions of different contrast assigned to SiO2 core (bright spots), pBA inner segment (dark halo around SiO2) and pMMA segment (continuous matrix).
2.3 Polymer Brushes from Particles
The core shell structure of these colloids was reflected in AFM images, owing to different mechanical compliances of blocks. Variable-force tapping-mode AFM images of monolayer patches formed by SiO1.5-g-(pS-b-pBzA) nanoparticles revealed the presence of rigid protrusions (inorganic cores surrounded by pS) dispersed uniformly in a soft matrix formed by outermost pBzA blocks [90]. In addition, phase images revealed that the innermost regions of rigid protrusions were surrounded by “halos”, which were attributed to the pS phase. Phase contrast between rigid inorganic cores and glassy pS was most likely facilitated by the higher mechanical lossiness of the latter. Further studies were conducted with SiO2-g-(pBA-b-pMMA) systems where a rubbery pBA segment (DPn = 94) was inserted between the rigid core (Deff = 20 nm) and glassy pMMA segment (DPn = 352) [95]. Height and phase tapping-mode AFM images of SiO2-g-(pBA94-b-pMMA352) ultra-thin films revealed the presence of distinct spherical protrusions with center-to-center spacing of about 70 nm, embedded in a continuous matrix (Figure 2.3(a)). Change of appearance of height images upon switching from light tapping (A/Ao ! 1) to harder tapping (A/Ao = 0.78), indicated that the protrusions consisted of rigid cores (SiO2 particles), surrounded by the well-defined zone of more deformable material (pBA), and embedded in a less deformable matrix (pMMA) (Figure 2.3(b)). 2.3.3
Imaging of Individual Spherical Brushes
Upon casting from sufficiently dilute solutions, spherical brushes could be deposited on surfaces as individual nano-objects, which could be further studied in detail using tapping-mode AFM. In general, the AFM images revealed that upon deposition of individual particles on the surface, the tethered chains collapsed around the core forming distinct “coronas”. In some cases, the peripheral chains of these coronas could be imaged with molecular resolution, reminiscent of molecularly resolved images of molecular brushes. 2.3.3.1 Spherical Brushes with Polar Homopolymer Shells Cast onto Mica Tapping-mode AFM images of individual spherical brushes composed of SiO2-gpMMA175 (Mn cleaved pMMA = 17 560; Mw/Mn = 1.30) with silica cores of average diameter Deff = 20 nm are shown in Figure 2.4. Samples for imaging were prepared by spin-coating a dilute polymer solution in chloroform onto mica. Spherical cores with diameters ranging from 20 to 40 nm are surrounded by well-defined coronas of pMMA. Although individual pMMA chains were not clearly resolved in this case, the frayed edges of the coronas corresponded most likely to bundles of glassy pMMA. Figure 2.4 illustrates also an important aspect related to the synthesis of spherical brushes from colloidal inorganic particles: the proximity of the cores strongly suggests that the particles shown in this image are linked together. Such inter-particle crosslinking is generally undesirable, and most likely occurs when the synthesis is carried out at too high concentration of colloidal inorganic precursors. SiO2-g-pBA140 spherical brushes (Mn tethered pBA = 17 990; Mw/Mn = 1.28) of comparable size of molar mass were spin-coated onto a mica surface and also imaged using
61
62
2 Polymer Brushes by Atom Transfer Radical Polymerization
Figure 2.4 Tapping-mode AFM height (left) and phase (right) images of SiO2-gpMMA175 spherical brushes.
Figure 2.5 Tapping-mode AFM height (left) and phase (right) images of SiO2-g-pBA hybrid nanoparticle. SEC of cleaved pBA indicated Mn = 17 990; Mw/Mn = 1.28.
tapping-mode AFM. Similar to images of pBA molecular brushes, individual colloids with a corona of tethered pBA extending on the mica substrate were observed in both height and phase AFM images (Figure 2.5). In AFM height images, silica cores were discernable as tall features (white spots) surrounded by tethered pBA. Strikingly different features were observed in phase images, where silica cores (bright central spot) were embedded in a dense shell of collapsed pBA (dark corona), followed by extension of single chains from the outer edge of the pBA corona (dark outer shell). Spherical Brushes with Polar Block Copolymer Shells Cast onto Mica Block copolymer brushes of SiO2-g-(pBA94-b-pMMA352) ultra-thin films which were described in the previous section were also visualized at the level of individual isolated particles. As shown previously in Figure 2.3, AFM images of SiO2-g-(pBA94-bpMMA352) ultrathin films revealed clearly discernable domains of more compliant pBA sandwiched between the rigid SiO2 core and pMMA shell. Three distinct zones were also observed in AFM images of individual SiO2-g-(pBA94-b-pMMA352) particles 2.3.3.2
2.4 Molecular Brushes
Figure 2.6 Tapping-mode AFM height (left) and phase (right) image of an individual SiO2-g-(pBA94-b-pMMA352) core-shell nanoparticle.
deposited on mica by spin-coating from dilute chloroform solution (Figure 2.6). An interesting feature observed for this system was the spreading of outer pMMA chains on the mica surface. In contrast to both SiO2-g-pMMA (Figure 2.4) and SiO2g-pBA (Figure 2.5) brushes, the outer pMMA segments had a distinct “blobby” appearance, which could be related to local collapse of pMMA segments. 2.3.4
Modification of Carbon Black Fillers
Carbon black is an industrially important filler which is composed of primary particles with diameters of 10 to 75 nm that are fused into aggregates that range from 50 to 500 nm in size [76,96,97]. The synthesis of carbon black grafted with pBA chains was conducted via surface-initiated ATRP from functional carbon black surfaces [98]. An analysis of pBA chains cleaved from the cores indicated that polymers with tunable molar mass and low polydispersity (Mn = 48 450; Mw/Mn = 1.33) were obtained. AFM of pBA-coated carbon black particles cast onto mica confirmed the efficient grafting of pBA to the central core, with morphologies consistent with those observed for other pBA spherical brushes.
2.4
Molecular Brushes
For the purpose of this review, the definition of molecular brushes is limited to densely grafted copolymers bound to either a linear or dendritic backbone. Due to the high local concentration of tethered chains, grafted chains extend away from the polymeric backbone, despite the conformation of flexibility that it may exhibit. ATRP has proved to be a valuable polymerization technique for the preparation of molecular brushes, as both the composition and DP of the backbone and side chains can be precisely controlled (Scheme 2.4).
63
64
2 Polymer Brushes by Atom Transfer Radical Polymerization
Scheme 2.4
General approach to densely grafted copolymers by ATRP.
2.4.1
Synthesis of Molecular Brushes from Linear Polymeric Macroinitiators
Current efforts towards the synthesis of molecular brushes from densely grafted copolymers are focused on the ATRP of various (meth)acrylates, acrylamides and styrene from linear macroinitiators that carry an alkyl halide moiety at each repeat unit. Due to the high degree of functionality and local concentration of initiating groups on the macroinitiators, ATRP in these systems usually requires the use of low catalyst concentrations, the external addition of deactivator at the initial stages, and long reaction times in order to avoid termination reactions (as discussed in Section 2.2).
2.4 Molecular Brushes
Systematic investigations of structural variations in molecular brushes have been pursued to prepare a wide range of nanostructured materials. Variation of DP in either backbone (DP = 100 to 4000) and side chains (DP = 10 to 100) has been conducted to prepare either very long brushes spanning several hundreds of nanometers, or very “hairy” structures with long extensions from a dense core. The availability of a range of monomers (e.g., S, acrylamides, alkyl (meth)acrylates, poly(ethylene oxide) macromonomers) enabled the preparation of hydrophobic or hydrophilic brushes which possessed either rubbery or glassy bulk properties. Additionally, the modification of backbone and side chain composition allowed the preparation of a wide range of complex copolymers with varying topology, composition and density of grafting of brush-like segments present in the material [23–31]. When densely grafted brushes are deposited on surfaces which facilitate favorable interactions, the side chains tend to spread on the surface, enabling AFM imaging with single-chain resolution [32,33]. Imaging of brushes with block copolymer side chains [24,25] has also been conducted, in addition to brushes with block, statistical and gradient copolymer segments along a linear backbone [26,27]. Recently, molecular brushes with branched architectures have also been synthesized, and these serve as interesting probes to examine the initiation efficiencies of ATRP using multifunctional initiators [31]. 2.4.2
Molecular Brushes from Dendritic Macroinitiators
The synthesis of various hybrid dendritic-linear copolymers has been performed using dendritic initiators [18,22,99]. Additionally, densely grafted “dendri-graft” structures have been prepared by alternation of nitroxide-mediated chain extensions and ATRP [100]. Molecular brushes that are spherical in nature have been synthesized by ATRP of various methacrylates from a multifunctional dendrimer core. The synthesis and application of these dense spherical molecular brushes as nanoporogens toward the preparation of low k dielectric materials for microelectronic applications have been extensively studied by Hedrick and Miller et al. [20,21,101,102].
Summary
Atom transfer radical polymerization has emerged in recent years as a versatile and powerful tool for the synthesis of organic (co)polymers of precise molar mass, composition, and topology. Due to the high functional group tolerance of this process, both polymerizable and initiating groups have been incorporated to a variety of substrates, thereby enabling the modification of copolymer or surface properties. As demonstrated by results presented in this chapter, ATRP is particularly suitable for the preparation of polymer brushes from well-defined copolymers, nanocomposites, or covalently bound ultrathin films.
65
66
2 Polymer Brushes by Atom Transfer Radical Polymerization
Acknowledgments
Support from the National Science Foundation through grants DMR 00-90409 (K. M.), DMR 0110247 (T. K.) and ECS 01-03307 (K. M.) and CRP Consortium at Carnegie Mellon University is gratefully acknowledged. The text of this Chapter corresponds closely to a review article published recently by the same authors [103].
References 1 A. Halperin, M. Tirrell, T. P. Lodge, Adv.
Polym. Sci. 1992, 100, 31. 2 T. P. Lodge, M. Muthukumar, J. Phys. Chem. 1996, 100, 13275. 3 M. Ejaz, S. Yamamoto, K. Ohno, Y. Tsujii, T. Fukuda, Macromolecules 1998, 31, 5934. 4 J.-B. Kim, M. L. Bruening, G. L. Baker, J. Am. Chem. Soc. 2000, 122, 7616. 5 W. Huang, G. L. Baker, M. L. Bruening, Angew. Chem. Int. Ed. 2001, 40, 1510. 6 W. Huang, J.-B. Kim, M. L. Bruening, G. L. Baker, Macromolecules 2002, 35, 1175. 7 J.-B. Kim, W. Huang, M. L. Bruening, G. L. Baker, Macromolecules 2002, 35, 5410. 8 J.-B. Kim, W. Huang, M. D. Miller, G. L. Baker, M. L. Bruening, J. Polym. Sci., Polym. Chem. Ed. 2003, 41, 386. 9 M. M. Guerrini, B. Charleux, J.-P. Vairon, Macromol. Rapid Commun. 2000, 21, 669. 10 K. N. Jayachandran, A. Takacs-Cox, D. E. Brooks, Macromolecules 2002, 35, 4247. 11 D. Bontempo, N. Tirelli, G. Masci, V. Crescenzi, J. A. Hubbell, Macromol. Rapid Commun. 2002, 23, 417. 12 D. Bontempo, N. Tirelli, K. Feldman, G. Masci, V. Crescenzi, J. A. Hubbell, Adv. Mater. 2002, 14, 1239. 13 K. Min, J. Hu, C. Wang, A. Elaissari, J. Polym. Sci., Polym. Chem. Ed. 2002, 40, 892. 14 G. Zheng, H. D. H. Stoever, Macromolecules 2002, 35, 6828. 15 M. Ejaz, Y. Tsujii, T. Fukuda, Polymer 2001, 42, 6811. 16 A. Carlmark, E. Malmstroem, J. Am. Chem. Soc. 2002, 124, 900.
17 T. A. von Werne, D. S. Germack, E. C. Hag-
18 19
20
21
22 23
24
25
26
27 28
29
30
berg, V. V. Sheares, C. J. Hawker, K. R. Carter, J. Am. Chem. Soc. 2003, 125, 3831. M. R. Leduc, C. J. Hawker, J. Dao, J. M. J. Frechet, J. Am. Chem. Soc. 1996, 118, 11111. M. R. Leduc, W. Hayes, J. M. J. Frechet, J. Polym. Sci., Part A: Polym. Chem. 1998, 36, 1. A. Heise, J. L. Hedrick, C. W. Frank, R. D. Miller, J. Am. Chem. Soc. 1999, 121, 8647. A. Heise, S. Diamanti, J. L. Hedrick, C. W. Frank, R. D. Miller, Macromolecules 2001, 34, 3798. K. Inoue, Prog. Polym. Sci. 2000, 25, 453. K. L. Beers, S. G. Gaynor, K. Matyjaszewski, S. S. Sheiko, M. Moeller, Macromolecules 1998, 31, 9413. H. G. Boerner, K. Beers, K. Matyjaszewski, S. S. Sheiko, M. Moeller, Macromolecules 2001, 34, 4375. G. Cheng, A. Boekerm M. Zhang, G. Krausch, A. H. E. Mueller, Macromolecules 2001, 34, 6883. H. G. Boerner, D. Duran, K. Matyjaszewski, M. da Silva, S. S. Sheiko, Macromolecules 2002, 35, 3387. S. Qin, K. Matyjaszewski, H. Xu, S. S. Sheiko, Macromolecules 2003, 36, 605. S. Qin, H. G. Borner, K. Matyjaszewski, S. S. Sheiko, Polym. Prep. (Am. Chem. Soc., Div. Polym. Chem.) 2002, 43, 237. D. Neugebauer, K. Matyjaszewski, M. da Silva, S. S. Sheiko, Polym. Prep. (Am. Chem. Soc., Div. Polym. Chem.) 2002, 43, 239. D. Neugebauer, K. Matyjaszewski, Poly. Prep. (Am. Chem. Soc., Div. Polym. Chem.) 2002, 43, 241.
References 31 K. Matyjaszewski, S. Qin, J. R. Boyce,
50 S. Yamamoto, M. Ejaz, Y. Tsujii, M. Matsu-
D. Shirvanyants, S. S. Sheiko, Macromolecules 2003, 36, 1843. 32 S. S. Sheiko, S. A. Prokhorova, K. L. Beers, K. Matyjaszewski, I. I. Potemkin, A. R. Khokhlov, M. Moeller, Macromolecules 2001, 34, 8354. 33 S. S. Sheiko, M. Moeller, Chem. Rev. 2001, 101, 4099. 34 C. J. Hawker, A. W. Bosman, E. Harth, Chem. Rev. 2001, 101, 3661. 35 J. Chiefari, E. Rizzardo, in: Handbook of Radical Polymerization, K. Matyjaszewski and T. P. Davis, Ed.; Wiley-Interscience: Hoboken, 2002; p. 629. 36 M. Husemann, M. Morrison, D. Benoit, J. Frommer, C. M. Mate, W. D. Hinsberg, J. L. Hedrick, C. J. Hawker, J. Am. Chem. Soc. 2000, 122, 1844. 37 R. R. Shah, D. Merreceyes, M. Husemann, I. Rees, N. L. Abbott, C. J. Hawker, J. L. Hedrick, Macromolecules 2000, 33, 597. 38 H. Mori, D. C. Seng, M. Zhang, A. H. E. Mueller, Langmuir 2002, 18, 3682. 39 H. Fischer, Macromolecules 1997, 30, 5666. 40 H. Fischer, Chem. Rev. 2001, 101, 3581. 41 C. Yoshikawa, A. Goto, T. Fukuda, Macromolecules 2002, 35, 5801. 42 K. Matyjaszewski, P. J. Miller, N. Shukla, B. Immaraporn, A. Gelman, B. B. Luokalam T. M. Siclovan, G. Kickelbick, T. Vallant, H. Hoffmann, T. Pakula, Macromolecules 1999, 32, 8716. 43 J. Xia, S. G. Gaynor, K. Matyjaszewski, Macromolecules 1998, 31, 5958. 44 D. Xiao, M. J. Wirth, Macromolecules 2002, 35, 2919. 45 M. Husseman, E. E. Malmstroem, M. McNamara, M. Mate, D. Mecerreyes, D. G. Benoit, J. L. Hedrick, P. Mansky, E. Huang, T. P. Russell, C. J. Hawker, Macromolecules 1999, 32, 1424. 46 C. Devaux, J. P. Chapel, E. Beyou, P. Chaumont, Eur. Phys. J. E: Soft Matter 2002, 7, 345. 47 S. Yamamoto, M. Ejaz, Y. Tsujii, T. Fukuda, Macromolecules 2000, 33, 5608. 48 M. Ejaz, S. Yamamoto, Y. Tsujii, T. Fukuda, Macromolecules 2002, 35, 1412. 49 D. M. Jones, A. A. Brown, W. T. S. Huck, Langmuir 2002, 18, 1265.
moto, T. Fukuda, Macromolecules 2000, 33, 5602. 51 S. Yamamoto, Y. Tsujii, T. Fukuda, Macromolecules 2000, 33, 5995. 52 S. Yamamoto, Y. Tsujii, T. Fukuda, Macromolecules 2002, 35, 6077. 53 X. Kong, T. Kawai, J. Abe, T. Iyoda, Macromolecules 2001, 34, 1837. 54 B. Zhao, W. J. Brittain, J. Am. Chem. Soc. 1999, 121, 3557. 55 B. Zhao, W. J. Brittain, Macromolecules 2000, 33, 8813. 56 B. Zhao, W. J. Brittain, W. Zhou, S. Z. D. Cheng, J. Am. Chem. Soc. 2000, 122, 2407. 57 B. Zhao, W. J. Brittain, W. Zhou, S. Z. D. Cheng, Macromolecules 2000, 33, 8821. 58 R. A. Sedjo, B. K. Mirous, W. J. Brittain, Macromolecules 2000, 33, 1492. 59 S. G. Boyes, W. J. Brittain, X. Weng, S. Z. D. Cheng, Polym. Prep. (Am. Chem. Soc., Div. Polym. Chem.) 2002, 43, 549. 60 P. J. Miller, K. Matyjaszewski, Macromolecules 1999, 32, 8760. 61 J. Pyun, S. Jia, T. Kowalewski, K. Matyjaszewski, Macromol. Chem. Phys. 2004, 205, 411. 62 M. R. Buchmeiser, R. Kroll, K. Wurst, T. Schareina, R. Kempe, C. Eschbaumer, U. S. Schubert, Macromol. Symp. 2001, 164, 187. 63 N. Ayres, D. M. Haddleton, A. J. Shooter, D. A. Pears, Macromolecules 2002, 35, 3849. 64 X. Huang, L. J. Doneski, M. J. Wirth, Anal. Chem. 1998, 70, 4023. 65 F. C. Leinweber, J. Stein, M. Otto, Fresenius’ J. Anal. Chem. 2001, 370, 781. 66 U. Meyer, F. Svec, J. M. J. Frechet, C. J. Hawker, K. Irgum, Macromolecules 2000, 33, 7769. 67 C. Viklund, A. Nordstroem, K. Irgum, F. Svec, J. M. J. Frechet, Macromolecules 2001, 34, 4361. 68 O. Prucker, J. Ruehe, Macromolecules 1998, 31, 602. 69 O. Prucker, J. Ruehe, Macromolecules 1998, 31, 592. 70 X. Huang, M. J. Wirth, Macromolecules 1999, 32, 1694. 71 J. Qiu, B. Charleux, K. Matyjaszewski, Prog. Polym. Sci. 2001, 26, 2083.
67
68
2 Polymer Brushes by Atom Transfer Radical Polymerization 72 M. Antonietti, K. Landfester, Prog. Polym.
Sci. 2002, 27, 689. 73 J. M. Asua, Prog. Polym. Sci. 2002, 27, 1283. 74 Q. Zhang, E. E. Remsen, K. L. Wooley, J. Am. Chem. Soc. 2000, 122, 3642. 75 S. Liu, J. V. M. Weaver, M. Save, S. P. Armes, Langmuir 2002, 18, 8350. 76 N. Tsubokawa, S. Yoshikawa, Recent Res. Dev. Polym. Sci. 1998, 2, 211. 77 T. Von Werne, T. E. Patten, J. Am. Chem. Soc. 1999, 121, 7409. 78 H. Bottcher, M. L. Hallensleben, S. Nuss, H. Wurm, Polym. Bull. (Berlin) 2000, 44, 223. 79 T. K. Mandal, M. S. Fleming, D. R. Walt, Chem. Mater. 2000, 12, 3481. 80 G. Carrot, S. Diamanti, M. Manuszak, B. Charleux, J. P. Vairon, J. Polym. Sci., Part A: Polym. Chem. 2001, 39, 4294. 81 S. C. Farmer, T. E. Patten, Chem. Mater. 2001, 13, 3920. 82 T. von Werne, T. E. Patten, J. Am. Chem. Soc. 2001, 123, 7497. 83 S. Habaue, O. Ikeshima, H. Ajiro, Y. Okamoto, Polym. J. (Tokyo, Jpn) 2001, 33, 902. 84 C. Perruchot, M. A. Khan, A. Kamitsi, S. P. Armes, T. von Werne, T. E. Patten, Langmuir 2001, 17, 4479. 85 D. A. Savin, J. Pyun, G. D. Patterson, T. Kowalewski, K. Matyjaszewski, J. Polym. Sci., Polym. Phys. 2002, 40, 2667. 86 X. Chen, C. Perruchot, S. P. Armes, Polym. Prep. (Am. Chem. Soc., Div. Polym. Chem.) 2002, 43, 265. 87 S. Nuss, H. Bottcher, H. Wurm, M. L. Hallensleben, Angew. Chem. Int. Ed. 2001, 40, 4016. 88 K. Ohno, K.-m. Koh, Y. Tsujii, T. Fukuda, Macromolecules 2002, 35, 8989.
89 B. Gu, A. Sen, Macromolecules 2002, 35,
8913. 90 J. Pyun, K. Matyjaszewski, T. Kowalewski,
D. Savin, G. Patterson, G. Kickelbick, N. Huesing, J. Am. Chem. Soc. 2001, 123, 9445. 91 G. Kickelbick, U. Schubert, Monatsh. Chem. 2001, 132, 13. 92 G. Kickelbick, D. Holzinger, C. Brick, G. Trimmel, E. Moons, Chem. Mater. 2002, 14, 4382–4389. 93 C. R. Vestal, Z. J. Zhang, J. Am. Chem. Soc. 2002, 124, 14312. 94 R. S. Tanke, S. M. Kauzlarich, T. E. Patten, K. A. Pettigrew, Chem. Mater. 2003, 15, 1682–1689. 95 J. Pyun, S. Jia, T. Kowalewski, G. D. Patterson, K. Matyjaszewski, Macromolecules 2003, 36, 5094. 96 W. Li, Z. Xie, Z. Li, J. Appl. Polym. Sci. 2001, 81, 1100. 97 N. Tsubokawa, T. Satoh, M. Murota, S. Sato, H. Shimizu, Polym. Adv. Technol. 2001, 12, 596. 98 T. Liu, S. Jia, T. Kowalewski, K. Matyjaszewski, R. Casado-Portilla, J. Belmont, Langmuir 2003, 19, 6342. 99 M. Jikei, M.-a. Kakimoto, Prog. Polym. Sci. 2001, 26, 1233. 100 C. J. Hawker, Acc. Chem. Res. 1997, 30, 373. 101 J. L. Hedrick, T. Magbitang, E. F. Connor, T. Glauser, W. Volksen, C. J. Hawker, V. Y. Lee, R. D. Miller, Chem. Eur. J. 2002, 8, 3308. 102 H.-C. Kim, J. B. Wilds, C. R. Kreller, W. Volksen, P. J. Brock, V. Y. Lee, T. Magbitang, J. L. Hedrick, C. J. Hawker, R. D. Miller, Adv. Mater. 2002, 14, 1637. 103 J. Pyun, T. Kowalewski, K. Matyjaszewski, Macromol. Rapid Comm. 2003, 24, 1043.
69
3
Polymer Brushes by Atom Transfer Radical Polymerization Initiated from Macroinitiator Synthesized on the Surface Viktor Klep, Bogdan Zdyrko, Yong Liu, and Igor Luzinov
Abstract
In the present study, a primary polymer layer approach was used for the preparation of an effective macroinitiator for the synthesis of polymer brushes by atom transfer radical polymerization (ATRP) initiated from the surface. For the initial surface modification, poly(glycidyl methacrylate) (PGMA) was used. When deposited on a substrate, the primary PGMA layer first reacted with the surface through formation of covalent bonds. The glycidyl methacrylate units that were not connected to the substrate served as reactive sites for the subsequent attachment of ATRP initiator. Accordingly, ATRP macroinitiator was synthesized on the substrate surface by the reaction between epoxy groups of PGMA and carboxy functionality of bromoacetic acid. Variation of the PGMA layer thickness allowed control over the amount of bromoacetic acid (BAA) attached to the surface. Two different surface concentrations of BAA were used in grafting experiments to investigate the relationship between the amount of initiator anchored to the surface through PGMA and the rate of brush formation. Polystyrene brushes of different thicknesses were synthesized on the PGMA/BAA-modified substrates using ATRP.
3.1
Introduction
The composition and behavior of surfaces and interfaces plays a pivotal role in dictating the overall efficiency of a majority of materials and devices. For instance, the control of surface and interfacial properties is critical in many traditional areas of science and technology such as colloid stabilization, adhesion, lubrication, rheology, immobilization of catalysts, and generation of multiphase materials [1–5]. Besides the traditional fields, surface modification has recently found use in bioengineering, nonlinear optics, (bio)sensors, nanopatterning, molecular recognition, waveguides, and electronic microcircuit processing. A promising means to optimize surface properties is via the deposition of thin polymer layers that are tethered to the surface and possess appropriate physical and chemical properties [6,7]. As a consequence,
70
3 Polymer Brushes by Atom Transfer Radical Polymerization
solid surface modification with thin polymer films has attracted great interest during the past few years. The most commonly used methods of thin film preparation on solid substrates include polymer deposition by spin casting, precipitation, Langmuir-Blodgett technique, polymer adsorption and chemical grafting of polymers. Grafting techniques have certain advantages over others, including the easy and controllable introduction of polymer chains with a high surface density, precise localization of the chain at the surface, and the long-term stability of the grafted layers [8]. Tethered polymer chains that are connected to the solid substrate by one chain end may be distinguished from other grafted polymer layers, as they form polymer brushes if a relatively high grafting density is reached. Brush-like layers are formed due to the excluded volume effect, when the substrate is completely covered with a relatively dense monolayer of grafted chains stretched normal to the support. There are several major parameters that control the brush properties, namely: grafting density, chain length, and chemical composition of the chains. It is possible to regulate the properties of the brush, which can be predicted by simple scaling relationships, by tuning the grafting parameters [6]. The chemical grafting of polymer brushes can be accomplished using either “grafting to” or “grafting from” methods. In the “grafting to” technique, end-functionalized polymer molecules react with complementary functional groups located on the surface to form tethered chains. However, only a limited amount of the polymer can be tethered onto the substrates when using the “grafting to” approach. The attaching polymer chains must overcome an activation barrier, which appears as soon as the earlier attached chains begin to overlap. In the “grafting from” technique, the polymerization is initiated from the substrate surface by attached (usually covalently bonded) initiating groups. Molecules of a monomer penetrate through the already grafted polymer layer easily and significant amounts of grafted polymer can be attained. This technique has been used for the preparation of thick grafted layers of high grafting density on the surface. Anionic [9], cationic [10,11], controlled/living [12,13], and conventional [14,15] free radical polymerizations have been successfully used to synthesize tethered polymer layers on solid substrate surfaces. By making an appropriate choice of initiating system, temperature, monomer, and concentration, it is quite possible to synthesize layers possessing different morphology, thickness and composition [6]. Thus, fine-tuning of the layer properties is possible. Controlled/“living” free radical polymerization has a number of advantages over traditional polymerization procedures. The main advantages that a “living” process provides are reliable control over the polymer molecular weight and narrow polydispersities. Thus, the nature of the polymerization process permits structural characteristics of the grafted polymer brush to be readily varied and controlled. An added benefit is the frontal character of the chain growth on the surface. In this manner, all chains have very similar history that may be translated in more predictable cooperative behavior of the chains and make the brush almost “defect-free”. Numerous effective approaches are reported for the synthesis of homogeneous polymer brushes by “living” free radical polymerization [16–38].
3.1 Introduction
Husseman et al. [12,39] have demonstrated that initiator functionalized surfaces, suitable for both alkoxyamine and atom transfer radical polymerization (ATRP) living free radicals procedures, can be readily prepared. These surfaces are stable to prolonged storage, and can be used for the controlled synthesis of polymeric brushes. The use of “living” free radical chemistry permitted the accurate control of molecular weight or thickness of the brush while maintaining low polydispersity. It was noted that different functional monomers could be polymerized utilizing the same synthetic approach to the brush synthesis. Matyjaszewski et al. [13] reported on the ATRP of styrene and acrylates from a silicon wafer modified with an initiator layer composed of 2-bromoisobutyrate fragments. In the presence of the proper ratio of activating and deactivating transition metal species, controlled radical polymerizations of styrene were observed. The thickness of the layer constituting chains grown from surface increased linearly with the molecular weight of the macromolecules obtained in solution in identical experiment. Boyes et al. [40] successfully synthesized and characterized a tethered triblock copolymer by sequential monomer addition to a self-assembled monolayer of (11-(2-bromo-2-methyl)propynyloxy) undecyltrichlorsilane. The block copolymer brushes were prepared using ATRP. Upon treatment with different solvents, the tethered triblock copolymer brushes exhibited reversible changes in surface properties. De Boer et al. [41] developed a method for chemically modifying a surface with a grafted iniferter monolayer, which can be used for a “living” free radical photopolymerization. By using this process, it was possible to control the length of the grafted polymer chains and therefore the layer thickness up to approximately 100 nm. Single layer grafted block copolymers were also obtained by subsequent polymerization of styrene and methyl methacrylate monomers. Tsujii et al. [42] studied the mechanism and kinetics of reversible addition fragmentation chain transfer technique (RAFT) initiated from a solid surface. It was shown that RAFT could also be used for the synthesis of polymer brushes. RAFT has been successfully applied to the synthesis of various polymer brushes by Baum and Brittain [43]. Styrene, methyl methacrylate, and N,N-dimethylacrylamide brushes were prepared under RAFT conditions using silicate surfaces that were modified with surface-immobilized initiators. There are two common approaches for the attachment of polymerization initiators for the brush synthesis by the controlled/living method. The first approach relies on the reactions between end-functionalized initiator and native functional groups originally present on the substrate surface [12,30]. A different approach involves the formation of a monolayer consisting of functional groups active towards the terminally functionalized (e.g., epoxide, amine, anhydride or hydroxide) initiator [35]. Silane and thiol chemistries have proved to be suitable for the grafting in this case. Usually, the coupling methods are relatively complex and specific for certain substrate/initiator combinations. An alternative method for attachment of initiating functionalities to modified surface involves the deposition of a primary polymer (mono)layer with activity towards both surface and functionalized molecules
71
72
3 Polymer Brushes by Atom Transfer Radical Polymerization
[44–46]. The polymer is used for the initial surface modification as well as for generation of the highly reactive primary layer. When deposited on a substrate, the primary layer first reacts with the surface through formation of covalent bonds. The reactive units located in the “loops” and “tails” sections of the attached macromolecules are not connected to the surface [47]. These free groups offer a synthetic potential for the further chemical modification reactions and serve as reactive sites for the subsequent attachment of the initiators. If the polymer used for building the primary layer contains functional groups, which are highly active in various chemical reactions, the primary layer approach becomes virtually universal towards both surface and end-functionalized initiating species being used for brush formation. In the present study, the primary polymer layer approach was used for the synthesis of an effective macroinitiator for the ATRP. For the initial surface modification poly(glycidyl methacrylate) (PGMA) was used. A polymer with epoxy functionality was chosen since the epoxy groups are quite reactive with carboxyl, hydroxyl, amino, and anhydride functional groups. The glycidyl methacrylate units that were not connected to the substrate served as reactive sites for the subsequent attachment of ATRP initiator. Accordingly, ATRP macroinitiator was synthesized on the substrate surface by the reaction between epoxy groups of PGMA and carboxy functionality of bromoacetic acid (BAA). Variation of the PGMA layer thickness allowed control over the amount of BAA attached to the surface. Polystyrene brushes of different thicknesses were synthesized on the PGMA/BAA modified substrates by ATRP.
3.2
Experimental
Highly polished single-crystal silicon wafers of <100> orientation (Semiconductor Processing Co.) were used as a substrate. The wafers were first cleaned in an ultrasonic bath for 30 min, placed in a hot piranha solution (3:1 concentrated sulfuric acid/30% hydrogen peroxide) for 1 h, and then rinsed several times with high-purity water. Glycidyl methacrylate and styrene (Aldrich) were purified by treatment with an inhibitor-removing adsorbent and vacuum distillation. Glycidyl methacrylate was polymerized via a free radical method to give poly(glycidyl methacrylate) (PGMA), Mn = 84 000, polydispersity (PDI) = 3.4. Copper(I) bromide (CuBr), 4,4¢-dinonyl-2,2¢bipyridyl (dNbP), BAA, and ethylbromoacetate (Et-BA) were used as received from Aldrich. PGMA was deposited on the silicon surface by dip-coating or adsorption from solution. Resulting PGMA films were treated with BAA vapor in argon at 110 LC, and then washed with ethanol. ATRP of styrene was carried out with maximum precaution to avoid oxygen. For this purpose, CuBr (1 mol), dNbP (2 or 2.1 mol), free initiator (Et-BA, 2 mol) or CuBr2 (0.05 mol), and styrene (300– 1000 mol) were sealed in a flask and immediately subjected to several repeating freeze-pump cycles. This reaction mixture was stirred at 50 LC until complete dissolution of solids and formation of a deep-brown homogeneous solution occurred. The final mixture was distributed between test tubes in a glove box (free O2 content < 5 ppm). The silicon wafers were immersed into each test tube in the glove box and
3.3 Results and Discussion
sealed. For polymerization, the test tubes were immersed into a preheated silicon oil bath (110 LC) for different time periods. Ungrafted polystyrene was removed from wafers by multiple washings with toluene, followed by washing in a toluene ultrasonic bath. Samples of the ungrafted polystyrene formed in the bulk were isolated by precipitation with ethanol and purified by multiple precipitations from tetrahydrofuran solution into ethanol, and dried in a vacuum oven. The thickness of the synthesized brushes was determined using ellipsometry, which was performed on a COMPEL Automatic Ellipsometer (InOm Tech, Inc.). Surface characterization of obtained brushes was performed by scanning probe microscopy (SPM) in tapping mode on a Dimension 3100 (Digital Instruments, Veeco) microscope. MW/Mn was determined using gel-permeation chromatography (GPC; Waters). The surface coverage (adsorbed amount), C (mg m–2), was estimated from the ellipsometry thickness of the layer, h (nm) by the following equation [48]: C = h
(1)
where is the bulk density of the attached molecule (g cm–3). The surface density, R (molecules per nm2) – that is, the inverse of the average area per adsorbed chain, was approximated by: R = C NA O 10–21/M = (6.023 C O 100)/Mn
(2)
where NA is the Avogadro’s number and M (g mol–1) is the molar mass of the attached molecule. The density of BAA (1.934 g cm–3) used in the calculations was obtained from the supplier [49].
3.3
Results and Discussion 3.3.1
Synthesis of Macroinitiator for ATRP
Figure 3.1 illustrates schematically the process used to synthesize the macroinitiator. The synthesis included two major steps: (1) deposition of the primary PGMA layer on the surface; and (2) attachment of BAA to the surface modified with the primary layer through the reaction between the carboxyl and epoxy functionalities. In order to obtain a thin layer of the PGMA macromolecular precursor attached to the surface of silicon wafer, two different procedures were employed, namely dip-coating and adsorption from PGMA solution. When the adsorption process was utilized, the thickness of the primary PGMA layer was varied from a few Angstroms to 5 nm by changing the adsorption time, temperature, and/or solvent quality. Generally, the thickness of the primary PGMA layer increased with time, and reached a plateau after 15–20 h. The solvent quality
73
74
3 Polymer Brushes by Atom Transfer Radical Polymerization
OH
OH
OH
OH
OH
OH
OH
OH
OH
OH
HO
-C(O)CR 2-Br R=H or CH 3
(
CH2-C(CH3) O
)n
O
O Figure 3.1 Schematic representation of poly(glycidyl methacrylate) (PGMA)/ bromoacetic acid (BAA) macroinitiator synthesis on the surface.
was adjusted by varying the solvent composition. Methylethylketone (MEK) and toluene were employed as a good solvent and a non-solvent, respectively. As the concentration of toluene in the solution increased, the thickness of the PGMA adsorbed layer increased accordingly. It should be mentioned that the adsorption modification gave good quantitative reproducibility only when fresh solutions were prepared from newly synthesized PGMA. It is supposed that some hydrolytic and/or crosslinking processes involving the PGMA epoxy groups might occur during storage of the PGMA samples and solutions. As a result of these side processes (which may be due to trace amounts of water and/or basic/acidic contaminants), small fractions of the hydrolyzed and/or crosslinked macromolecules having different (typically higher) adsorptive ability may be formed and change the course of the PGMA adsorption. However, any changes that may have occurred in the PGMA structure were undetectable with FT-IR and GPC. No significant differences in the FT-IR spectra and GPC data were observed after one year of PGMA storage under ambient conditions. Dip-coating gave excellent quantitative reproducibility, as compared to the adsorption procedure. After the dip-coating, not only smooth and uniform covering (Figure 3.2(a) and (b)) were observed, but also stable reproducibility in the thickness of the
3.3 Results and Discussion
reactive primary layer. Aging of the adsorbed film overnight at ambient conditions or annealing for 20 min at 110 LC led to permanent attachment of the deposited film to the substrate. The annealed PGMA layer was smooth, and uniformly covered the substrate (Figure 3.2(c) and (d)). The silicon wafers covered with the adsorbed PGMA layers were vigorously rinsed with series of highly polar solvents including dimthylsulfoxide (DMSO) and tetrahydrofuran (THF). The layer could not be removed from the substrate after vigorous solvent treatment, which suggested that the epoxy groups of the polymer had chemically anchored the PGMA to the surface [44]. Next, the stability and deactivation of the PGMA at the elevated temperatures was checked, as during the synthesis of ATRP macroinitiators the PGMA layer was kept at elevated temperatures for significant amounts of time. Dodecyl amine (DA) was grafted to the PGMA films annealed at 120 LC for different times to induce self-
a)
b)
c)
d)
Figure 3.2 Scanning probe microscopy (SPM) images of PGMA layer deposited on the surface of the silicon wafer by dip-coating. (a, b) As deposited; (c, d) annealed at 110 %C. Image sizes: (a, c) 10 * 10 lm; (b, d) 1 * 1 lm. Vertical scales: (a, c) 10 nm; (b, d) 2 nm.
75
3 Polymer Brushes by Atom Transfer Radical Polymerization
40 2
Σ (molecules/nm )
76
30 20 10
1
2
3
4
5
PGMA thickness (nm) Figure 3.3
a)
Surface density (R) of attached BAA versus thickness of the annealed PGMA layer.
b)
c)
Figure 3.4 SPM images of PGMA/BAA macroinitiator synthesized using: (a) as deposited PGMA layer; (b, c) PGMA layer annealed at 110 %C. Image sizes: (a, b) 10 * 10 lm; (c) 1 * 1 lm. Vertical scale 10 nm.
3.3 Results and Discussion
crosslinking and possible hydrolysis of the epoxy layer. This low molecular-weight substance was used as a probe for the presence of the accessible epoxy groups. The experiment showed that approximately 40% of the epoxy groups were still available on the surface after the annealing. The drop in the initial activity of the PGMA layer towards DA occurred almost immediately when the epoxy layer was heated. Since dip-coating process gave more reproducible primary PGMA layers, this process of layer deposition was used in further experiments. Attachment of the BAA to the surface covered with the PGMA film was conducted from the gaseous phase in argon at 110 LC. It was observed by ellipsometry that the effective thickness of the PGMA layer increased 1.3- to 1.6-fold after the treatment with BAA; this indicated attachment of a significant amount of the substance. Ellipsometry showed near-linear dependence between thickness of the primary PGMA layer and the amount of BAA attached (Figure 3.3). The reaction between the epoxy groups and the carboxyl functionality of the BAA produces a bromoacetic ester derivative of the PGMA (see Figure 3.1). Such a-bromoesters are known as effective initiators for ATRP of styrene, acrylic and some other vinyl monomers [50]. Therefore, the ATRP macromolecular initiator, covalently anchored to the silicon surface, was obtained. It should be mentioned that, when BAA was attached to the unannealed PGMA layer, the morphology of the PGMA/BAA film became irregular with a significant amount of aggregates scattered on the surface (Figure 3.4(a)). Conversely, the preannealed PGMA film produced macroinitiator possessing smooth and uniform surface morphology (Figure 3.4(b) and (c)). Thereby, for ATRP experiments we used only macroinitiator derived from the pre-annealed PGMA layer. These annealed PGMA films allowed initiator surface densities that were significantly higher than were reported for the self-assembled monolayer of ATRP initiators (e.g., for 6 nmthick primary PGMA film approximately 40 a-bromoester fragments per nm2 versus approximately three initiating sites per nm2 for the typical self-assembled monolayer of the ATRP initiator) [30]. 3.3.2
ATRP from Macroinitiator
The fundamental idea of ATRP is the halogen exchange in the polymerizing system between the halogen-terminated growing polymer chain/Cu(I) dNbP complex and macroradical/Cu(II) dNbP complex (Figure 3.5) [50]. Chain propagation is a firstorder process, while termination is a second-order reaction. For conventional bulk or solution ATRP the equilibrium is strongly shifted to the left. The free radical conR-Br
+
CuBrL2
k1
R
k2
+
CuBr2L2
M k3 Figure 3.5
Idealized mechanism of atom transfer radical polymerization (ATRP).
77
78
3 Polymer Brushes by Atom Transfer Radical Polymerization
centration is as low as 10–7 to 10–8 mol L–1, and the Cu(II) concentration is approximately 5% of that for Cu(I) [50]. Consequently, the termination is diminished and all chains grow simultaneously during the polymerization, without noticeable termination. An adequate concentration of Cu(II) is critical for effective reaction control. However, when the ATRP is initiated from the surface, the amount of the initiator located on the substrate is not sufficient to create the concentration of Cu(II) species required for polymerization control [13,51]. There are two methods developed for maintaining the Cu(II) concentration for ATRP initiated from a surface: (1) Simultaneous initiation of ATRP from the surface and in solution; and (2) Addition of the necessary amount of Cu(II) at the beginning of the process [13]. In the present study, both approaches were tested for the ATRP grafting from the PGMA/BAA macroinitiator adsorbed onto the surface, and the polymer brushes grafted to the silicon surface were successfully obtained using the two methods. Control experiments were conducted under exactly the same polymerization conditions, but with no initiator attached to the PGMA layer. Without the initiator almost all polymer, formed by the free initiator and deposited on the surface, was removed during the rinsing procedure and only film thickness of 1–2 nm remained on the surface. The observation showed that virtually no macroradicals from the bulk could be attached to the surface and that the PGMA/BAA macroinitiator was, indeed, necessary for brush formation. Additional experiments were conducted to confirm the role of other ingredients in the polymerization initiated from the surface. In the absence of both free initiator and CuBr2 in solution, very rapid formation of a polystyrene brush was observed on the surface covered with PGMA/BAA macroinitiator (in the range of 50–100 nm during the first hour). It is believed that for this case the initiation occurred by the reaction between BAA and CuBr, but no control was achieved and conventional free radical polymerization was carried out. When the brush synthesis was attempted without CuBr, dNbP, or PGMA on the surface of the wafer, only traces of polymer tethered to the substrate were detected. Figure 3.6 illustrates how the thickness of the polystyrene brush varies with time throughout ATRP initiated from the surface by the PGMA/BAA macroinitiator. Two different surface concentrations of BAA were used in these grafting experiments in order to acquire knowledge regarding the relationship between the amount of initiator anchored to the surface through PGMA and the rate of brush formation. The wafers used for grafting were covered with PGMA layers of two different thicknesses (0.8 nm and 4 nm). The effective thickness of the BAA attached to the surface (measured by ellipsometry) was 0.5 nm and 2 nm for the thinner and thicker PGMA adsorbed films, respectively. These amounts corresponded to 4 and 17 BAA molecules per nm2, respectively. These values were close to, and higher than, the typical surface density of self-assembled monolayers of ATRP initiators employed (~3 molecules nm–2) [30]. The process was carried out in the presence of an equivalent amount of Cu(I) complex to the free initiator (Et-BA) to generate Cu(II) species. At the beginning of the process, a virtually linear increase of polystyrene layer thickness was observed. Later, the grafting rate decreased and the brush thickness practically leveled off. The deceleration of the grafting could be explained by the monomer consumption for
3.3 Results and Discussion 2
PGMA 0.8 nm; BAA 4 molecules/nm 2 PGMA 4 nm; BAA 17 molecules/nm
35 Thickness (nm)
30 25 20 15 10 5 0 0
1000 2000 3000 4000 5000 Time (min)
Figure 3.6 Thickness of grafted polystyrene layer versus polymerization time. Sacrificial initiator added. Styrene/CuBr/Et-BA/dNbP ratio: 300/1/1/2.
a)
b)
c)
d)
Figure 3.7 Topographic SPM images of polystyrene brushes obtained with sacrificial initiator added. Initiator surface density: (a, b) BAA 4 molecules nm–2; (c, d) BAA 17 molecules nm–2. Brush thickness: (a) 6.5 nm;
(b) 18 nm; (c) 7 nm; (d) 21.5 nm. Vertical scale 10 nm. Image sizes 1 * 1 lm. Roughness: (a) 0.31 nm; (b) 0.56 nm; (c) 0.51 nm; (d) 0.67 nm.
79
3 Polymer Brushes by Atom Transfer Radical Polymerization
-1
Molecular Weight (gmol )
the ATRP process initiated in the bulk. Figure 3.7 shows the surface morphology of the grafted layers of different thickness. The brushes completely cover the substrate surface, and their structure is virtually independent of the surface concentration of the PGMA/BAA macroinitiator used for the synthesis. The roughness of the grafted layers increases with thickness (see legend for Figure 3.7). Since it has been shown [20] that grafted chains have almost the same molecular weight and molecular weight distribution as ungrafted (free) polymer being formed in the bulk or solution, the molecular weight of the free polystyrene synthesized was analyzed at the different stages of the process. The molecular weight increased simultaneously with the thickness of the grafted polymer layer on the surface (Figure 3.8). Polydispersity remained low (Mw/Mn < 1.3) throughout the grafting, and confirmed the controlled/living character of the polymerization in the bulk. Linear dependence between the thickness of the brush and the molecular weight was found (Figure 3.9). The linear relationship indicated that the polymerization processes were of the same nature in the bulk and on the surface. Thereby, providing further 25000 20000 15000 10000 5000 0
500 1000 Time (min)
1500
Figure 3.8 Molecular weight of ungrafted polystyrene versus polymerization time. Sacrificial initiator added. Styrene/CuBr/ Et-BA/dNbP ratio, 300/1/1/2.
2
PGMA 0.8 nm; BAA 4 molecules/nm 2 PGMA 4 nm; BAA 17 molecules/nm 35 30
Thickness (nm)
80
25 20 15 10 5 0
5000 10000 15000 20000 25000 -1 Molecular Weight (gmol ) Figure 3.9 Thickness of grafted polystyrene layer versus molecular weight of ungrafted polymer. Sacrificial initiator added. Styrene/CuBr/Et-BA/dNbP ratio, 300/1/1/2.
3.3 Results and Discussion
evidence that the ATRP of styrene from the PGMA/BAA macroinitiator also occurred in controlled/living manner. In a subsequent set of experiments, the polymerization was conducted without the Et-BA initiator in the bulk. CuBr2 (5% mol to CuBr) was added to the system to provide the necessary amount of the Cu(II) species. As expected, for the polymerization without the unbound initiator only a minute quantity of the free polystyrene was detected for long reaction times. The molecular weight of this polymer increased with time, as expected for typical ATRP reaction, up to 30 000 g mol–1 and the polydispersity index was narrow (Mw/Mn < 1.5). At the same time, significant amounts of the grafted polymer accumulated on the surface (Figure 3.10). During this period, the thickness of the polystyrene brush first increased linearly, after which the grafting process slowed down (Figure 3.10). SPM studies showed that the grafted layers uniformly covered the surface at different stages of the grafting process (Figure 3.11). After 1000–1500 min, a noteworthy amount of unbound polystyrene was detected in the bulk. This free polymer had a Mw > 200 000 and Mw/Mn > 2. Clearly, the free polymer with such characteristics was formed due to self-initiating polymerization of styrene, and not to the controlled/living ATRP process. At 110 LC, self-initiation is typical for the styrene-containing systems [52]. Thus, slow formation of the radicals in the bulk was present throughout the experiment. Interaction of these radicals with the CuBr/CuBr2 system resulted in slow ATRP polymerization in the bulk. With time, the amount of newly formed radicals became comparable with the amount of CuBr2 initially introduced in the reaction mixture, and the polymerization went out of control. The rate of grafting increased at this stage of the process, the brush formation proceeded in an uncontrolled manner, and very thick brushes were obtained (Figure 3.10). Jeyaprakash et al. [51] also reported self-acceleration of the ATRP grafting of styrene at very long polymeriza2
Thickness (nm)
250
PGMA 0.8 nm; BAA 4 molecules/nm 2 PGMA 4 nm; BAA 17 molecules/nm
100
50
0 0
500
2000 4000
Time (min) Thickness of grafted polystyrene layer versus polymerization time. No sacrificial initiator added. Styrene/CuBr/ CuBr2/dNbP ratio, 300/1/0.05/2.1
Figure 3.10
81
82
3 Polymer Brushes by Atom Transfer Radical Polymerization
tion times, and attributed this to the following possible pathways: (1) still active ends polymerize uncontrolled due to Trommsdorf conditions; or/and (2) chains growing in solution abstract hydrogen atoms from grafted chains, and further uncontrolled growth starts from the site where the hydrogen was lost. A recent investigation [30] has identified a strong relationship between the initiator concentration on the surface and the amount of ATRP-grafted poly(methyl methacrylate). These authors estimated that only one of ten initiating groups in the selfassembled monolayer produced a grafted polymer chain. The surface concentration of initiator was varied from the maximum value observed for the monolayer to concentration that was 10-fold lower. Surprisingly, an almost linear relationship was found between the initiator density and the grafting rate. These data, which were obtained at room temperature in aqueous media, could not be directly compared
a)
b)
c)
d)
Topographic SPM images of polystyrene brushes obtained without sacrificial initiator added. Initiator surface density: (a, b) BAA 4 molecules nm–2; (c, d) BAA 17 molecules nm–2. Brush thickness: (a) 4.3 nm; (b) 46 nm; (c) 14 nm; (d) 24.5 nm. Vertical scale 10 nm. Image size 1 * 1 lm. Figure 3.11
3.3 Results and Discussion
with the present results due to differences in monomers and conditions. However, the same tendency was found in the present study where sufficiently higher concentrations of the initiator were used for the brush synthesis. Figure 3.12 shows how grafting density, R, changes during the course of the brush synthesis. (The Mn values obtained for the ungrafted polymer formed by the added sacrificial initiator were used for the R determination.) The grafting density was approximately two-fold higher for the samples that possessed higher amounts of the PGMA/BAA initiator located on the surface. From a comparison between the surface densities of the initiator and the attached polymer, it is clear that the efficiency of the initiation was in the region of 7–15%, but this efficiency was halved when the concentration of the initiator was quadrupled. Initially, the grafting density increased and then remained virtually constant. The existence of an initial stage showed that there was a period at the beginning of the grafting when new grafted chains constituting the brush originated on the surface. The duration of this period was similar for the higher and lower initiator concentrations. The following constancy of the grafting density at longer times indicated that the rate of exchange between the active and dormant chain was sufficiently fast, and that all chains grew slowly, at an almost identical rate [53]. It is clear that there is some controversy between tendencies observed for the ATRP polymerization from the surface and bulk/solution. According to the classical controlled/living ATRP mechanism, the rate constant for initiation must be in the same range as that for polymer chain propagation [50]. The initiation is rapid, and occurs at the very beginning of the polymerization process. All chains grow at the same time/rate, and the number of polymer chains obtained is almost equal to the number of initiator molecules introduced into the system. Hence, the efficiency of the initiator is high. The simultaneous growth of the polymer chains leads to a low polydispersity of the final polymer. The molecular weight can be forecast with high 2
PGMA 0.8 nm; BAA 4 molecules/nm 2 PGMA 4 nm; BAA 17 molecules/nm
1.2
2
Σ (chains/nm )
1.6
0.8 0.4 0.0
0
1000 2000 Time (min)
3000
Grafting density (R) of polystyrene (PS) chains attached to the surface versus polymerization time. Molecular weights of PS grafted and ungrafted were assumed to be the same.
Figure 3.12
83
84
3 Polymer Brushes by Atom Transfer Radical Polymerization
accuracy from the monomer conversion and the amount of initiator introduced. Alternatively, for the ATRP from initiator attached to the surface, the initiating efficiency is unexpectedly low. Additionally, there was a certain period at the beginning of the grafting when new grafted chains constituting the brush originated on the surface. This period may be much longer than the initiation stage for the ATRP in bulk/solution, and lead to somewhat higher polydispersity for the grafted chains. Of interest was the finding that the other experimental observations were in good agreement with the presumption that the surface grafting process was close to the controlled/living ATRP process proceeding at the same time in bulk/solution. For instance, a linear dependence was found between the thickness of the brush and the molecular weight of polymer formed in the bulk/solution. One probable reason for this might be the different rates of initiation and propagation on the surface and in bulk/solution during the initial period. In fact, diffusion limitations may significantly affect the initiation and dormant species formation at the surface. The diffusion control may lead to a lower rate of initiation but a higher rate of initial propagation. Clearly, further investigations are warranted to understand the ATRP grafting initiated at the phase boundary.
Summary
The primary polymer layer approach was used successfully to prepare an effective macroinitiator for the synthesis of polymer brushes by ATRP initiated from the surface. PGMA was used for the initial surface modification. The ATRP macroinitiator was synthesized on the substrate surface by reaction between the epoxy groups of PGMA and the carboxy function of BAA. Variation in the PGMA layer thickness allowed control to be exerted over the amount of BAA attached to the surface. When BAA was attached to an unannealed PGMA layer, the morphology of the PGMA/ BAA film became irregular, with a significant amount of aggregates scattered on the surface. Conversely, the pre-annealed PGMA film produced a macroinitiator layer that possessed a smooth and uniform surface morphology. The annealed PGMA film allowed the achievement of an initiator surface density which was significantly higher than that reported for self-assembled monolayer of ATRP initiators. Polystyrene brushes of different thicknesses were synthesized on the PGMA/ BAA modified substrates using ATRP. At the start of the polymerization process, a linear increase in polystyrene layer thickness was observed, but later on the rate of grafting decreased and the brush thickness practically leveled off. Two different surface concentrations of BAA were used in these grafting experiments in order to obtain information regarding the relationship between the amount of initiator anchored to the surface through PGMA and the rate of brush formation. The grafting density was higher for samples which possessed a higher amount of the PGMA/ BAA initiator located on the surface. From a comparison between the surface densities of the initiator and the attached polymer, it was concluded that the efficiency of initiation was in the region of 7–15%, but this efficiency was halved when the concentration of the initiator was quadrupled.
References
Acknowledgments
These investigations were supported by the Department of Commerce through National Textile Center, M01-C03 Grant, and in part by the ERC Program of National Science Foundation under Award Number EEC-9731680. The authors thank Dr. Gary Lickfield for helpful discussions, and Ms. Kim Ivey for the GPC measurements.
References 1 R. P. Wool, Polymer Interfaces: Structure and
14 Luzinov, S. Minko, V. Senkovsky, A. Voronov,
Strength, Hunser/Gardner, New York, 1995. 2 J. T. Koberstein, Polymer Surfaces and Interfaces, Guest Editor, MRS Bulletin, January 1996, p. 16. 3 J. Israelachvili, Intermolecular and Surface Forces, Academic Press, New York, 1992. 4 B. Ratner, J. Biomed. Mater. Res. 1993, 27, 837–850. 5 D. H. Napper, Polymeric Stabilization of Colloidal Dispersions, Academic Press, London, 1983. 6 B. Zhao, W. J. Brittain, Prog. Polym. Sci. 2000, 25, 677–710. 7 A. Halperin, M. Tirrell, T. P. Lodge, Adv. Polym. Sci. 1992, 100, 31–71. 8 Y. Uyama, K. Kat, Y. Ikada, Adv. Polym. Sci. 1998, 137, 1–39. 9 R. Jordan, A. Ulman, J. F. Kang, M. H. Rafailovich, J. Sokolov, J. Am. Chem. Soc. 1999, 121, 1016–1022. 10 B. Zhao, W. J. Brittain, Macromolecules 2000, 33, 342–348. 11 R. Jordan, N. West, A. Ulman, Y.-M. Chou, O. Nuyken, Macromolecules 2001, 34 1606– 1611. 12 M. Husseman, E. E. Malmstrom, M. McNamara, M. Mate, D. Mecerreyes, D. G. Benoit, J. L. Hedrick, P. Mansky, E. Huang, T. P. Russell, C. J. Hawker, Macromolecules 1999, 32, 1424–1431. 13 K. Matyjaszewski, P. J. Miller, N. Shukla, B. Immaraporn, A. Gelman, B. B. Luokala, T. M. Siclovan, G. Kickelbick, T. Vallant, H. Hoffmann, T. Pakula, Macromolecules 1999, 32, 8716–8724.
S. Hild, O. Marti, W. Wilke, Macromolecules 1998, 31, 3945–3952. 15 O. Prucker, J. RThe, Langmuir 1998, 14, 6893–6898. 16 J.-B. Kim, M. L. Bruening, G. L. Baker, J. Am. Chem. Soc. 2000, 122, 7616–7617. 17 R. R. Shah, D. Merreceyes, M. Husemann, I. Rees, N. L. Abbott, C. J. Hawker, J. L. Hedrick, Macromolecules 2000, 33, 597–605. 18 M. Ejaz, S. Yamamoto, Y. Tsujii, T. Fukuda, Macromolecules 2002, 35, 1412–1418. 19 M. Ejaz, S. Yamamoto, K. Ohno, Y. Tsujii, T. Fukuda, Macromolecules 1998, 31, 5934– 5936. 20 M. Ejaz, Y. Tsujii and T. Fukuda, Polymer 2001, 42, 6811–6815. 21 T. Yoshinobu, M. Ejaz, S. Yamamoto, T. Fukuda, K. Shigeto, K. Mibu, T. Shinjo, Polymer 2002, 43, 3837–3841. 22 S. Yamamoto, M. Ejaz, Y. Tsujii, T. Fukuda, Macromolecules 2000, 33, 5608–5612. 23 U. Meyer, F. Svec, J. M. J. Frechet, C. J. Hawker, K. Irgum, Macromolecules 2000, 33, 7769–7775. 24 M. Ejaz, K. Ohno, Y. Tsujii, T. Fukuda, Macromolecules 2000, 33, 2870–2874. 25 D. M. Jones, W. T. S. Huck, Adv. Mater. 2001, 13, 1256–1259. 26 D. Xiao, M. J. Wirth, Macromolecules 2002, 35, 2919–2925. 27 N. Jayachandran, A. Takacs-Cox, D. E. Brooks, Macromolecules 2002, 35, 4247–4257. 28 N. Luo, J. B. Hutchison, K. S. Anseth, C. N. Bowman, Macromolecules 2002, 35, 2487–2493.
85
86
3 Polymer Brushes by Atom Transfer Radical Polymerization 29 H. Mori, A. Boker, G. Krausch, A. H. E. Mul30 31
32
33
34
35 36
37 38 39
40
41
42
ler, Macromolecules 2001, 34, 6871–6882. D. M. Jones, A. A. Brown, W. T. S. Huck, Langmuir 2002, 18, 1265–1269. L. Robinson, M. V. de Paz-Banez, X. S. Wang, S. P. Armes, Macromolecules, 2001, 34, 5799–5805. C. Perruchot, M. A. Khan, A. Kamitsi, S. P. Armes, T. von Werne, T. E. Patten, Langmuir 2001, 17, 4479–4481. G. Cheng, A. Boker, M. Zhang, G. Krausch, A. H. E. Muller, Macromolecules 2001, 34, 6883–6888. W. Huang, J.-B. Kim, M. L. Bruening, G. L. Baker, Macromolecules 2002, 35, 1175– 1179. X. Kong, T. Kawai, J. Abe, T. Iyoda, Macromolecules 2001, 34, 1837–1844. G. Carrot, S. Diamanti, M. Manuszak, B. Charleux, J.-P. Vairon, J. Polym. Sci. A: Polym. Chemistry 2001, 39, 4294–4301. H. BVttcher, M. L. Hallensleben, S. Nuß, H. Wurm, Polym. Bull. 2000, 44, 223–229. Min, J. Hu, Ch. Wang, A. Elaissari, J. Polym. Sci. A: Polym. Chemistry 2002, 40, 892–900. Husemann, M. Morrison, D. Benoit, J. Frommer, C. M. Mate, W. D. Hinsberg, J. L. Hedrick, C. J. Hawker, J. Am. Chem. Soc. 2000, 122, 1844–1845. S. G. Boyes, W. J. Brittain, X. Weng, S. Z. D. Cheng, Macromolecules 2002, 35, 4960–4967. B. de Boer, H. K. Simon, M. P. L. Werts, E. W. van der Vegte, G. Hadziioannou, Macromolecules 2000, 33, 349–356. Y. Tsujii, M. Ejaz, K. Sato, A. Goto, T. Fukuda, Macromolecules 2001, 34, 8872–8878.
43 Baum, W. J. Brittain, Macromolecules 2002,
35,610–615. 44 M. Kothe, M. Muller, F. Simon, H. Komber,
45
46
47
48
49
50
51
52 53
H.-J. Jacobasch, H.-J. Adler, Colloid and Surfaces A 1999, 154, 75–85. V. Klep, I. Luzinov, Polymer Preprints 2002, 43(2), 706–707; K. S. Iyer, B. Zdyrko, H. Malz, J. Pionteck, I. Luzinov, Macromolecules 2003, 36, 6519–6526; Y. Liu, V. Klep, I. Luzinov, Polymer Preprints 2003, 44(1), 564–565. A. Sidorenko, X. W. Zhai, F. Simon, D. Pleul, V. V. Tsukruk, Macromolecules 2002, 35, 5131–5139. G. J. Fleer, M. A. Cohen Stuart, J. M. H. M. Scheutjens, T. Cosgrove, B. Vincent, Polymers at Interfaces, Chapman & Hall, New York, 1993. G. Henn, D. G. Bucknall, M. Stamm, P. Vanhoorne, R. Jerome, Macromolecules 1996, 29, 4305–4313. Aldrich: Handbook of Fine Chemicals and Laboratory Equipment, Milwaukee 2003–2004, p. 268. K. Matyjashewski, in: Controlled Radical Polymerization. ACS Symposium Series 685, American Chemical Society, Washington DC, 1998, Chapter 16, pp. 258–283. J. D. Jeyaprakash, S. Samuel, R. Dhamodharan, J. RThe, Macromol. Rapid Commun. 2002, 23, 277–281. G. Odian, Principles of Polymerization, WileyInterscience, New York, 1991, p. 231. A. Ramakrishnan, R. Dhamodharan, J. RThe, Macromol. Rapid Commun. 2002, 23, 612– 616.
87
4
Synthesis of Polypeptide Brushes Henning Menzel and Peter Witte
Abstract
Tethering rigid rod-like polypeptides covalently to a surface provides brushes with interesting properties. The dipole moment of the a-helical peptides can result in a net dipole moment of the film and in piezoelectricity. The dipole moment of the macromolecules on the other hand causes also problems in the preparation of brushes. Several approaches for peptide brush synthesis by using “grafting to” and “grafting from” methods are discussed, and a new method based on a living nickelmediated N-carboxyanhydride polymerization is presented.
4.1
Introduction
Polypeptide brushes can be formed by tethering polymers such as poly(benzyl-l-glutamate) (PBLG) to surfaces. Peptides such as PBLG form an a-helix as a stable secondary structure, and therefore are rigid and rod-like. In this respect, they differ from polymers with a flexible secondary structure, and this results in some unique characteristics. For instance, with its anisotropic molecular shape arising from its ahelical structure, PBLG shows a large dipole moment of 8000 D along the molecular axis, as well as a high hyperpolarization b of 5 - 10–28 esu for Mn = 500 000 g mol–1 [1]. Therefore, a non-linear optical (NLO) response (e.g., second harmonic generation, SHG) can be expected if a monomolecular polyglutamate film has an unidirectional orientation of the polymer backbones [2,3]. The permanent dipole moment of the film also results in piezoelectric effects [3], while polypeptide brush films also show promise in applications as a novel orienting layer in liquid crystal displays [4–6]. Because of their chirality and their helical structure, the amino acid building blocks might find applications in coatings of capillaries for chiral separations. Last but not least, polypeptide brushes may be useful for testing the theories for rigid rod-like polymer brushes.
88
4 Synthesis of Polypeptide Brushes
4.2
Preparation of Peptide Brushes by “Grafting To”
One approach to unidirectional orientation of the polypeptide helices is covalent attachment of one of the end groups to the substrate with a high grafting density (Figure 4.1). The grafting can be achieved by coupling of preformed polypeptides to the surface (“grafting to”) or by polymerization of the monomer N-carboxyanhydride (NCA) employing surface-bound initiators (“grafting from”).
Figure 4.1
Schematic drawing of an aligned polypeptide brush.
The problems associated with the grafting to approach for the preparation of peptide brushes are, in principle, well known and are the same as for all other polymers. The grafting density remains rather low due to the coverage of adsorption sites by the first molecules, the formation of diffusion barriers, and so forth. In the case of the helical polypeptides, the situation is even more complicated due to a strong tendency to form aggregates [7–10]. In such aggregates, the peptide rods are in an antiparallel arrangement in order to compensate the dipole moments. Therefore, it is expected that only half of the molecules are tethered to the surface, while the other half can be removed [11]. Despite these problems, Samulski et al. reported a nonplanar arrangement of PBLG end-functionalized with disulfide groups on gold substrates – that is, a relatively high surface coverage was achieved [12,13]. The orientation of the rods, on the other hand, is not perpendicular but almost isotropic [13], and these authors obtained the thickest layers upon adsorbing the polypeptide from solvents in which strong aggregation occurs [12]. An improvement in layer thickness and orientation of the peptide rods was possible by employing electrical fields to pre-orient the peptides before adsorbing them to the surface [14]. However, both layer thickness and orientational order in the film were still low. Coupling of PBLG to the silicon substrate modified with (N-(2-aminoethyl)-3-aminopropyl)methyldimethoxysilane was carried out by Machida et al. with dicyclohexylcarbodiimide [15]. In this case the surface coverage was relatively low, and the rods were oriented more or less parallel to the surface. These authors used the PBLG films to induce spiral textures in nonchiral nematic liquid crystalline 4-n-pentyl-4¢-cyano-biphenyl molecules [4–6,16]. Self-assembled layers of short-chain polyglutamic acid end-functionalized with a disulfide moiety were prepared on gold by Niwa et al. [17,18]. The density of the peptides on the gold surface can be adjusted via the pH of the aqueous solutions used for the adsorption experiments, which affects the helical content of peptides (the
4.2 Preparation of Peptide Brushes by “Grafting To”
higher the content of helical material, the higher the surface coverage) [17]. The low coverage films adsorb guest peptides that are not functionalized with an anchor group, which was shown by quartz microbalance measurements. By using electrochemical measurements and guest peptides which have electrochemically active groups as probes either at the C-terminus or the N-terminus of the peptide chain, it was possible to show that adsorption of the guest peptides takes place in such a way that the peptide rods are anti-parallel. This result is a strong indication that the interaction of peptide macrodipoles is the driving force for adsorption of the guest peptides [17,18]. This adsorption induced by macrodipole interaction can be reversed by using strongly helix-breaking solvents, and this principle has been suggested for the immobilization of DNA via a peptide functionalized with an intercalator. This peptide binds to the DNA via the intercalator, and to the peptide SAM layer at the surface via macrodipole interaction [11]. The importance of the macrodipole interaction and aggregation for the formation of better-ordered peptide SAMs was also emphasized by Kimura and coworkers [19– 21], who have prepared well-ordered peptide monolayers with almost perpendicular orientation of the helices by complex formation between a surface-bound ammonium group and a crown ether end group. The driving force here is the complexation and macrodipole interaction, as only one half of the peptides is bound via the complex formation. Similar results were obtained with disulfide end-functionalized poly(alanin-2-aminobutyric acid). This peptide has a strong helix-formation tendency, and smaller side chains allow stronger intermolecular interaction than in the case of PBLG. In contrast to PBLG, poly(alanin-2-aminobutyric acid) forms SAM on gold in which the orientation of the peptide rods is not random, but almost perpendicular with only a small tilt angle if the correct conditions are used for the adsorption [20]. In particular, the solvent from which the adsorption is carried out plays an important role (ethanol or dimethylformamide, DMF). Better results are obtained when using ethanol as solvent, because the peptides strongly aggregate in this medium, and the aggregation supports the formation and orientation of the helices [20]. By using the Kelvin technique it was possible to show that the SAMs of these peptides have a surface potential. Negative surface potentials of a few hundred millivolts were detected when the helix was immobilized via the N-terminus, but positive surface potentials were observed when the peptide was bound via the C-terminus. Furthermore, the longer the helix peptide, the larger was the surface potential. Both experimental results indicate that the surface potential is generated by the macrodipole of the peptide helix [21]. These authors also showed that the macrodipole orientation influences electron transfer in photocurrent generation [21]. Niwa et al. and Kimura et al. have shown that the problems associated with the grafting to approach can be overcome – at least partially – by taking advantage of the macrodipole interaction of the peptide helices.
89
90
4 Synthesis of Polypeptide Brushes
4.3
Preparation of Peptide Brushes by Grafting From Polymerization
Poly-l-glutamates can be prepared by polymerizing the corresponding N-carboxyanhydride 1 (Figure 4.2). With regard to initiation from the surface, it must be considered that at least two mechanisms of NCA-polymerization are competing, depending on the initiator used, namely: (1) the activated monomer (a.m.) mechanism, which is initiated by bases; and (2) the amine- or protic-mechanism, which is initiated by primary amines [22]. In order to understand the requirements and limitations of a grafting from polymerization, it is worthwhile examining more closely the mechanism of NCA polymerization.
Figure 4.2 Initiation and propagation in the N-carboxyanhydride (NCA)-polymerization via the amine-mechanism according to Ref. [22].
4.3.1
Mechanisms of NCA Polymerization Amine-Initiated Polymerization If the polymerization is initiated by primary or secondary amines, without any steric hindrance, then the process proceeds via the “amine mechanism” (Figure 4.2). The amine attacks the NCA-ring, and ring opening occurs. The intermediate 3 eliminates carbon dioxide, and a dimer with an amino end-group is generated, which can attack the next monomer. The new amino group is less reactive than a primary amine. Therefore, initiation is much faster than propagation, and the degree of polymerization can be adjusted to some extent by varying the monomerto-initiator ratio [22–24]. In this respect, the NCA polymerization has a kind of “living character”. Another mechanism which has been discussed in the literature is 4.3.1.1
4.3 Preparation of Peptide Brushes by Grafting From Polymerization
the “carbamate mechanism” (see, for example, Ref. [22]), but this does not play an important role in grafting from polymerizations. Activated Monomer Mechanism Strong bases can deprotonate the N-carboxyanhydride, whereupon the deprotonated anionic monomer is a strong nucleophilic agent that can attack another NCA molecule and, therefore, is called an “activated monomer”. The attack of a NCA ring results in the intermediate 6 (Figure 4.3). The intermediate 6 has two reactive sites: (1) the electrophilic N-acyl group; and (2) the nucleophilic carbamate group. The latter group can react according to the carbamate mechanism (pathway A in Figure 4.3). Furthermore, 6 can decarboxylate and the generated amine end-group in 7 can react according to the amine mechanism shown in Figure 4.2 (pathway B in Figure 4.3). Since decarboxylation of the intermediate 7’ gives an amide anion, the decarboxylation also results in deprotonation (activation) of a monomer molecule. This activated monomer can now attack a NCA ring, either of a monomer or at the end of a growing chain (pathway C in Figure 4.3). 4.3.1.2
Figure 4.3 Initiation and the various propagation reactions for the NCA-polymerization via the activated monomer mechanism.
91
92
4 Synthesis of Polypeptide Brushes
The polymerization occurs much more rapidly if strong bases or sterically hindered amines are used as initiators. Therefore, it was concluded that the attack of the activated monomer (pathway C in Figure 4.3) is much faster than the other possible polymerization reactions [22]. The diverse propagation steps encountered with this mechanism can explain the following results. First, the molecular weight is not determined by the ratio of monomer to initiator. Second, the molecular weight distribution is broad. Since the polymer chains are bifunctional, intermolecular coupling can occur, which increases the molecular weight [22–24]. If polymerization of the NCA proceeds via the “activated monomer mechanism”, then the initiator is not incorporated into the polymer. Thus, this mechanism must be avoided if the polymer is to be attached to a surface in a grafting from experiment. The “activated monomer mechanism” is preferred in the case of strong bases as initiators. Unfortunately, amines are also strong bases, and so can initiate NCA polymerization via the “activated monomer mechanism”, especially when sterically hindered. Therefore, for an efficient grafting from polymerization of NCA the surface should have primary amino groups with low steric hindrance.
Figure 4.4 Mechanism of the nickel-mediated polymerization of a-amino acid NCA, according to Deming [27,28].
4.3 Preparation of Peptide Brushes by Grafting From Polymerization
Living Nickel-Mediated NCA Polymerization According to Deming Deming published a new type of NCA polymerization in which nickel complexes are employed as initiators. This new NCA polymerization is a living polymerization – that is, the degree of polymerization can be adjusted via the initiator to monomer ratio, block copolymerization is possible, and there are no side reactions [25,26]. The mechanism of nickel-mediated polymerization of NCA as suggested by Deming is depicted in Figure 4.4 [27,28]. The first step is an oxidative addition of the NCA to the Ni0 complex, followed by decarbonylation. Subsequently, another NCA molecule is added and a Ni-amido amidate complex 12 is formed. This complex does not initiate NCA polymerization, and can be isolated in a dimeric form. It can also be activated by adding a ligand for the Ni in the complex (i.e., bipyridine). The activated complex 14 polymerizes NCA by insertion of a monomer unit into the Ni-amidate bond. 4.3.1.3
4.3.2
Amine-Initiated Grafting From Polymerizations in Solution
The first reports describing the grafting of polyglutamates from a surface outlined the use of spherical substrates (Aerosil A200V [29] and carbon black [30]) modified with aminopropyltrimethoxysilane (APS) as initiator on the surface. Schouten and coworkers used essentially the same chemistry to graft polyglutamates and polyaspartates on glass and silicon slides [29]. The layer thickness of the grafted polymer was estimated from infra-red (IR) spectroscopy data to be 5–10 nm [29]. These authors were also able to show that the preferred secondary structure of the peptide is not influenced by grafting the polymer to a substrate [31]. Whitesell et al. used indium-tin oxide modified with APS or a gold surface with a specially designed initiator with thiol anchoring groups to polymerize alanine NCA [32,33]. The thiol initiator was designed to fit the surface requirements of the polypeptide helix and, therefore, to reduce steric hindrance. These authors claimed that their surface-grafted polyalanine had a perpendicular helical structure with a film thickness of up to 300 nm. However, this layer thickness was estimated from the intensity of an IR absorption band, whilst ellipsometry as a direct method produced highly variable data. It is most likely that the layer thickness of 300 nm was overestimated because of physisorbed polymers which could not be removed by washing the substrate with ethanol. According to Whitesell et al., it is favorable to adjust the surface density of initiating groups in order to reduce the steric hindrance for the polymerization reaction [32]. This can be carried out by using specially designed initiator molecules. Heise et al. also employed self-assembled monolayers as initiating layers, and adjusted the surface density of initiating sites by diluting through use of binary mixtures [34,35]. The thickness of PBLG films grafted from those substrates after washing with dichloracetic acid/chloroform mixtures was up to 12 nm, as measured by ellipsometry and X-ray reflectometry [34,36]. The layer thickness is comparable to those measured by Schouten and coworkers [29], and there was also no significant dependence of film thickness on the monolayer composition, which determines the surface den-
93
94
4 Synthesis of Polypeptide Brushes
sity of initiators. It was concluded that limitations inherent to the polymerization mechanism [22,36] restricts the chain length and layer thickness and not steric hindrance due to a high surface density of initiators. The Schouten group recently published the results of their solution-based grafting polymerizations with improved techniques. These authors used DMF as solvent (as this reduces the tendency to aggregate) and also adjusted the monomer concentration. In this way they were able to show that a layer thickness of 24 nm [37] and a tilt angle of 32–48M (depending on the side chain of the polyglutamate, whether methyl or benzyl ester) can be achieved [38]. However, the most important result was that the polymer layer could be used for a renewed polymerization after the polypeptide which was formed as a free polymer in solution and physisorbed to the graft polymer layer had been removed by careful washing steps. This result indicates that the degree of polymerization in amine-initiated grafting from polymerization is not limited by side reactions but rather by a type of physical death. That is, the adsorption of polymers restricts the accessibility of the growing chain end such that almost no more growth occurs. These renewed polymerizations enabled the authors also to prepare block copolymers by simple amine-initiated grafting from polymerization [39]. This method was also used for the preparation of PBLG surface-grafted films on aluminum substrates, which were used to measure the electromechanical properties of polar films [3]. The electric field-induced change in film thickness, which was dominated by a large inverse-piezoelectric effect, showed that polypeptide layers with a large, persistent polarization can be fabricated employing the grafting from approach. The molecular dynamics of PBLG surface grafted from aluminum substrates modified with 1-phosphoric acid-12-N-ethylaminododecane was investigated by Hartmann et al. [40]. KratzmNller et al. prepared microstructured polypetide brushes by using microcontact printing of 12-mercaptododecane amine on gold surfaces and subsequent amine-initiated NCA graft polymerization in solution. The thickness of the film was shown by ellipsometry (homogeneous film) and by AFM (microstructured film) to be ~30 nm [41]. 4.3.3
Other Techniques for Amine-Initiated Grafting From Polymerizations
Wieringa and Schouten also developed a solvent-free technique to graft PBLG and poly(methyl-l-glutamate) from silicon wafer modified with 3-aminopropyltriethoxysilane (APS) or (4-aminobutyl)dimethylmethoxysilane [42]. These authors spin-coated a NCA film onto the amino functionalized wafer, and heated the film above the melting point of the NCA. The polymerization then took place in the melt, and therefore at much higher monomer concentrations. Beside the tethered polymer, large amounts of unbound PBLG are also formed when using this technique, and consequently the films must be washed with chloroform/dichloroacetic acid mixtures. The layer thickness of the films after the washing step was approximately 20 nm[42].
4.4 Preparation of Peptide Brushes by Living Grafting From Polymerization
Another solvent-free method is the vapor deposition method developed by Chang and Frank [43]. By adjustment of parameters such as monomer concentration, reaction time, reaction temperature and pressure, the layer thickness can be increased and fine-tuned. By using specially designed chambers and optimized reaction parameters, layers of up to 180 nm thickness can be created using this technique. Vapor deposition polymerization also allows a renewed polymerization. After washing away any physisorbed material, the grafted polymer can be used as an initiator for new monomer, and the preparation of surface-grafted block copolypeptides is possible [44]. Polar and quadrupolar anisotropy has been established for these films by electro-optic measurements [45]. By employing both a good solvent to stretch out and orient the molecular chains, and a nonsolvent to “freeze” their upright orientation, the order of the peptide rods could be improved significantly. The better orientation after solvent treatment has been proven by grazing incidence reflection FT-IR spectroscopy [46].
4.4
Preparation of Peptide Brushes by Living Grafting From Polymerization 4.4.1
Copolymerization Approach
Although some the problems of surface grafting by use of amine-initiated polymerization have been solved (see previous sections), there remains a need for controlled graft polymerization in order to improve the layer thickness, to achieve block copolymerizations, and to graft to nonflat surfaces, for example the inside of a capillary. Use of the living nickel-mediated polymerization as described by Deming (see Section 4.3.1.3) appears to be highly advantageous in this respect. In order to use nickel-mediated NCA polymerization for a grafting from polymerization, it is necessary to bind the growing chain to the surface. This binding cannot be carried out via the bipyridine ligand, as the initiating complex is destroyed upon work-up. The tethering, therefore, must be made via the amido amidate part of the complex, which is formed by the reaction of NCA molecules with Ni0 species in three steps. In the case of amino acids with a second functional group such as l-glutamic acid, this can be used to link the NCA to a surface. The question arising is in which step of the initiator formation the tethered NCA molecule should be used to obtain an optimized system for grafting from polymerization. Tethering the first NCA molecule would result in an active chain end which remains at the surface while the chain grows. This would result in an increasing diffusion barrier, and limitations in the degree of polymerization and layer thickness are likely. The second NCA molecule which is added in the decarboxylation step cannot be used to tether the growing chain to the surface, because the five-membered metallacycle 11 (see Figure 4.4), as it is produced in the decarbonylation step and which is necessary as reagent, can not be isolated.
95
96
4 Synthesis of Polypeptide Brushes
Figure 4.5 Strategy for tethering a growing polymer chain to a surface employing a block copolymerization approach: the surface-bound NCA (X = surface) is subjected to an excess of
initiator A to create a growing chain end at the surface. After removing the excess of A, free NCA is added to grow the polymer chain from the surface.
Additional NCA molecules are incorporated at the reaction center during the course of the polymerization reaction. Therefore, one possible way to tether the growing polymer chain to a surface is a process similar to block copolymerization. The procedure comprises the addition of an activated complex to a surface bearing covalently bound NCA molecules to create a growing chain end. Subsequent
Figure 4.6
Preparation of NCA tethered to a polystyrene resin via a photolabile linker [47].
4.4 Preparation of Peptide Brushes by Living Grafting From Polymerization
removal of the excess of initiating complex and addition of free NCA to the active chain ends at the surface allow for further growth of the polymer chain (Figure 4.5). The proof of principle for this approach was presented only recently [47,48], whereby polystyrene beads were used as substrates after functionalization with a photo-labile linker. Glutamic acid was bound to this substrate and subsequently converted into surface-bound NCA (Figure 4.6). A bromo-a-methylphenacyl group was chosen as linker that can be introduced by Friedel-Crafts acylation of the polystyrene beads with a-bromopropionic acid chloride [49]. The a-methylphenacyl ester can be cleaved by UV light, but is otherwise stable to the reaction conditions. The selective esterification resulting exclusively in the c-l-glutamic acid ester can be performed by a substitution reaction between a copper complex of the glutamic acid salt and a halogen [50] species. Treatment with either phosgene or triphosgene yields the surface-bound NCA. Resin-3 with the surface-bound NCA was then reacted with activated Ni amido amidate complex A according to the scheme presented in Figure 4.5. After the reaction, the excess of A was removed by several careful washing steps, and a solution of c-benzyl-l-glutamic acid NCA (BLG-NCA) in DMF was added. After 16 h the solution was removed and the resin carefully washed and extracted in order to remove any physisorbed polymer. The resin showed a significant mass increase due to surface-grafted polyglutamate. The polymer at the surface can be established from FT-IR spectra, which show all the bands typical for PBLG, in addition to the bands stemming from the polystyrene resin itself (Figure 4.7). The polymer can be cleaved from the resin by photolysis of the methylphenacyl group with UV light at 365 nm. The cleaved polymer can be isolated and investigated by size-exclusion chromatography (SEC; Figure 4.8). The peak shape in the SEC trace is almost Gaussian; however, a second peak in the SEC trace can be detected by light scattering. This second peak occurs at very high molecular weights,
FT-IR spectra of poly(benzyl-l-glutamate) (PBLG) grafted from a polystyrene resin, and of PBLG prepared in solution.
Figure 4.7
97
4 Synthesis of Polypeptide Brushes 0.25 LS detector 90º (x 10) RI detector
0.20
intensity
98
0.15
0.10
0.05
0.00 8
9
10
11
12
13
14
15
16
17
volume
Gel permeation chromatography (GPC) traces [refractive index (RI) and light scattering (LS) detectors) of the cleaved poly(benzyl-l-glutamate). Figure 4.8
and is caused by debris formed by the prolonged stirring of the resin that could not be removed by membrane filtration. From the SEC traces and the light scattering data, a molecular weight of Mn = 22 000 g mol–1 and a polydispersity (PD) of 1.52 could be determined for the cleaved graft polymer. Beside the graft polymer at the surface, there is polymer present in the solution after the reaction, and this can be easily isolated by precipitation. The molecular weight and polydispersity of this polymer suggests that it has been formed by some physisorbed initiator, which starts polymerization while still physisorbed at the surface. With increasing length of the polymer chain, it becomes more soluble in the solution and eventually desorbs. The results of the polymerization experiments – and in particular the polydispersity of the cleaved PBLG – provide evidence that a living polymerization of NCA started by a nickel initiator tethered to a surface is possible. However, the protocol used to prepare the substrate with the initiator at the surface is complicated, and it was not possible to remove all of the physisorbed initiator. Therefore, PBLG was formed not only at the surface but also in solution. In the preparation of polar films by using a grafting from polymerization approach, the presence of free polypeptides in solution is unfavorable, because of possible aggregates with anti-parallel arrangement of the dipoles, which can in turn result in strong physisorption [17,19–21,51] and physical “death” of the growing polymer chain [39].
4.4 Preparation of Peptide Brushes by Living Grafting From Polymerization
4.4.2
Alloc-Amide Approach
Simplification of the synthetic protocol and the exclusion of physisorbed initiator requires that the initiator is built up at the surface in more defined way. This is possible when employing allyoxycarbonyl (alloc) amides as precursors (Figure 4.9) [52]. The R*-group in the alloc amide can be varied widely [52], and it should be possible to use this position in the precursor to tether the complex to the surface.
Figure 4.9 Schematic drawing of the preparation of nickel amido amidate complexes from alloc amides [52].
We have prepared surfaces equipped with alloc amide functionalities by reacting the N-hydroxysuccinimide ester of the leucine alloc amide [52] with commercially available amino-functionalized polystyrene beads (Figure 4.10). The functionalized beads were then activated with an excess of Ni(COD)2 and a ligand (e.g., phenanthroline) according to the scheme depicted in Figure 4.9.
Figure 4.10
Alloc amide functionalization of polystyrene resin with amino groups.
The functionalization and activation can be monitored using FT-IR spectroscopy (Figure 4.11). In order to verify the active species, a model complex was synthesized and compared to the complex synthesized with the alloc amide resin. As can be seen in Figure 4.11, the bands typical for N-H bonds and the amide group for the surface-bound species and the model complex are identical. Thus, initiator produced at the resin surface can be used to polymerize BLG-NCA in DMF solution. The polymerization results in a significant mass increase of the resin, even after careful washing with dichloroacetic acid/chloroform, and corresponds to approximately 18% of the monomer used in the reaction. The presence of poly-c-benzyl-l-glutamate at the surface of the resin can also be established in the
99
100
4 Synthesis of Polypeptide Brushes
FT-IR spectra of polystyrene beads functionalized with alloc amide groups, polystyrene beads functionalized with nickel amido amidate initiating sites, and the corresponding model initiator, respectively.
Figure 4.11
FT-IR spectra, which show all peptide bands, as well as bands from the polystyrene substrate (Figure 4.12). In contrast to the graft polymerization employing the “copolymerization approach” (see Section 4.4.1), a substantially lower amount of free polymer in solution has been isolated and the amount of monomer grafted to the surface is threefold higher. The amount of free polymer seems to depend on the experimental conditions for the preparation of the surface-bound initiator, and is expected to be lowered significantly by further optimization, for example by a reduction of the excess of Ni(COD)2 and phenanthroline in the activation step. Graft polymerization employing surfaces on which initiators have been prepared via the alloc amide precursors show great promise for the preparation of peptide brushes. The synthetic protocol is relatively simple, and in particular the number of steps requiring handling of the resin in the glove box are reduced. Moreover, the formation of free polymer in solution is also reduced.
4.4 Preparation of Peptide Brushes by Living Grafting From Polymerization
Comparative FT-IR spectra of polyglutamate grafted from polystyrene beads and polyglutamate.
Figure 4.12
Summary
Polypeptide brushes can be prepared by using both grafting to and grafting from approaches, though in both cases the strong interaction of the macrodipoles must be taken into account. These interactions are helpful and facilitate the fabrication of relatively thick films by grafting to methods, because larger aggregates present in the solution are adsorbed to the surface. The macrodipole interaction also has potential for applications of the grafted films in diagnostics. Homogeneous thick polypepide layers, however, are only accessible by using grafting from methods. The amine-initiated NCA polymerizations from solution yield peptide brushes of up to 40 nm thickness. The possibility of carrying out a renewed polymerization after the removal of physisorbed material shows that the adsorption of free polymer due to macrodipole interaction can cause physical “death” of the polymerization. The renewed polymerization allows the preparation of block copolymers. The occurrence of an inverse-piezoelectric effect showed that this grafting from technique does indeed force the a-helical chains into a parallel arrangement with a persistent polarization. Vapor deposition polymerization of NCA is
101
102
4 Synthesis of Polypeptide Brushes
another promising method, by which higher film thickness can be achieved (up to 70 nm) and block copolymerization is possible. The grafting from polymerization making use of nickel amido amidate complexes as initiators represents another very promising approach. Side reactions of the NCA can be minimized, giving a living character. The applicability of this method was established by using a polystyrene resin and a block copolymerization approach, but its major drawback is the large amount of free polymer that is produced in solution due to unbound, physisorbed initiator. The free polymer in solution can cause physical “death” of the living chain ends at the surface because of the macrodipole interaction, though improvements have been made in this respect by synthesizing the initiator directly at the surface from alloc amide precursors.
References 1 B. F. Levine, L. G. Bethea, J. Chem. Phys.
1976, 65, 1989. 2 H. Block, C. P. Shaw, Polymer 1992, 33, 2459. 3 T. Jaworek, D. Neher, G. Wegner, R. H. Wieringa, A. J. Schouten, Science 1998, 279, 57. 4 S. Machida, T. I. Urano, K. Sano, Y. Kawata, K. Sunohara, H. Sasaki, M, Yoshiki, Y. Mori, Langmuir 1995, 11, 4838. 5 S. Machida, K. Sano, K. Sunohara, Y. Kawata, Y. Mori, J. Chem. Soc., Chem. Commun. 1992, 1628. 6 T. I. Urano, S. Machida, K. Sano, Chem. Phys. Lett. 1995, 242, 471. 7 P. Doty, J. H. Bradbury, A. M. Holtzer, J. Am. Chem. Soc. 1956, 78, 947. 8 M. Goodman, E. E. Schmitt, D. Yphantis, J. Am. Chem. Soc. 1962, 84, 1288. 9 A. K. Gupta, C. Dufour, E. Marchal, Biopolymers 1974, 13, 1293. 10 A. Wada, J. Polym. Sci. 1960, 45, 145. 11 M. Niwa, M. Morikawa, T. Nabeta, N. Higashi, Macromolecules 2002, 35, 2769. 12 E. P. Enriquez, K. H. Gray, V. F. Guarisco, R. W. Linton, K. D. Mar, E. T. Samulski, J. Vac. Sci. Technol. A 1992, A10, 2775. 13 E. P. Enriquez, N. Y. Yin, R. C. Jarnagin, E. T. Samulski, Mater. Res. Soc. Symp. Proc. 1993, 292, 163. 14 C. G. Worley, R. W. Linton, E. T. Samulski, Langmuir 1995, 11, 3805.
15 S. Machida, K. Sano, H. Sasaki, M. Yoshiki,
Y. Mori, J. Chem. Soc., Chem. Commun. 1992, 1626. 16 T. I. Urano, S. Machida, K. Sano, J. Chem. Soc., Chem. Commun. 1994, 231. 17 M. Niwa, M. Morikawa, N. Higashi, Langmuir 1999, 15, 5088. 18 M. Niwa, M. Morikawa, N. Higashi, Angew. Chem. Int. Ed. Engl. 2000, 39, 960. 19 Y. Miura, S. Kimura, Y. Imanishi, J. Umemura, Langmuir 1998, 14, 2761. 20 Y. Miura, S. Kimura, Y. Imanishi, J. Umemura, Langmuir 1998, 14, 6935. 21 S. Kimura, Y. Miura, T. Morita, S. Kobayashi, Y. Imanishi, J. Polym. Sci. A., Polym. Chem. Ed. 2000, 38, 4826. 22 H. R. Kricheldorf, alpha-Aminoacid-N-Carboxy-Anhydrides and Related Heteocycles, (Ed. H. R. Kricheldorf) Springer-Verlag, Berlin, 1987, p. 170. 23 H.R. Kricheldorf, in: Models of Biopolymers by Ring-Opening Polymerization (Ed.: S. Penczek), CRC-Press, Boca Raton, Fl, 1990, 1. 24 H. Block, Poly-gamma-benzyl-L-Glutamate and other Glutamic Acid Containing Polymers, Gordon and Breach, New York, 1983, 131. 25 T. J. Deming, Nature 1997, 390, 386. 26 T. J. Deming, J. Am. Chem. Soc. 1997, 119, 2759. 27 T. J. Deming, J. Am. Chem. Soc. 1998, 120, 4240.
References 28 T. J. Deming, S. A. Curtin, J. Am. Chem. Soc. 29 30 31 32 33
34
35
36
37
38
2000, 122, 5710. M. L. C. M. Oosterling, E. Willems, A. J. Schouten, Polymer 1995, 36, 4463. E. Dietz, N. Fery, K. Haman, Angew. Makromol. Chem. 1974, 35, 115. M. L. C. M. Oosterling, E. Willems, A. J. Schouten, Polymer 1995, 36, 4485. J. K. Whitesell, H. K. Chang, Science 1993, 261, 73. J. K. Whitesell, Hye Kyung Chang, C. S. Whitesell, Angew. Chem. Int. Ed. Engl. 1994, 33, 871. A. Heise, H. Menzel, Hyun Kim, M.D. Foster, R. H. Wieringa, A. J. Schouten, V. Erb, M. Stamm, Langmuir 1997, 13, 723. A. Heise, M. Stamm, M. Rauscher, H. Duschner, H. Menzel, Thin Solid Films 1998, 327-, 199. H. Menzel, A. Heise, H. Yim, M.D. Foster, R. H., Schouten, A. J. Wieringa, in: Organic thin Films, Structure and Application (Ed.: C. W. Frank), Oxford University Press, New York, 1998, 131. R. H. Wieringa, E. A. Siesling, P. F. M. Geurts, P. J. Werkman, E. J. Vorenkamp, V. Erb, M. Stamm, A. J. Schouten, Langmuir 2001, 17, 6477. R. H. Wieringa, E. A. Siesling, P. J. Werkman, H. J. Angerman, E. J. Vorenkamp, A. J. Schouten, Langmuir 2001, 17, 6485.
39 R. H. Wieringa, E. A. Siesling, P. J. Werk-
man, E. J. Vorenkamp, A. J. Schouten, Langmuir 2001, 17, 6491. 40 L. Hartmann, T. KratzmNller, H.-G. Braun, F. Kremer, Macromol. Rapid Commun. 2000, 21, 814. 41 T. KratzmNller, D. Appelhans, H. G. Braun, Adv. Mater. 1999, 11, 555. 42 R. H. Wieringa, A. J. Schouten, Macromolecules 1996, 29, 3032. 43 Y. C. Chang, C. W. Frank, Langmuir 1998, 14, 326. 44 Y. Wang, Y. C. Chang, Langmuir 2002, 18, 9859. 45 Y. C. Chang, C. W. Frank, G. G. Forstmann, D. Johannsmann, J. Chem. Phys. 1999, 111, 6136. 46 Y. Wang, Y. C. Chang, J. Am. Chem. Soc. 2003, 125, 6376. 47 P. Witte, H. Menzel, Macromol. Chem. Phys. in press. 48 P. Witte, H. Menzel, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 2003, 44(1), 423. 49 S. S. Wang, J. Org. Chem. 1976, 41, 3258. 50 W. A. R. Van Heeswijk, M. J. D. Eenink, J. Feijen, Synthesis Commun. 1982, 744. 51 S. Kimura, Y. Miura, T. Morita, S. Kobayashi, Y. Imanishi, J. Polym. Sci. A., Polym. Chem. Ed. 2000, 38, 4826 52 S. A. Curtin, T. J. Deming, J. Am. Chem. Soc. 1999, 121, 7427.
103
105
5
Bottle Brush Brushes: Ring-Opening Polymerization of Lactide from Poly(hydroxyethyl methacrylate) Surfaces Jong-Bum Kim, Wenxi Huang, Chun Wang, Merlin Bruening, and Gregory L. Baker
Abstract
Ring-opening polymerization of lactide was initiated from poly(hydroxyethyl methacrylate) anchored to gold surfaces using Sn(Oct)2 as the catalyst. Control experiments showed that polymerization was initiated from the hydroxy groups of poly(hydroxyethyl methacrylate) and followed first-order kinetics. The polylactide growth rate was constant and proportional to the thickness of the poly(hydroxyethyl methacrylate) substrate, consistent with initiation of lactide polymerization from the bulk of the film. Thus, the overall structure of the polymer is a surface-anchored poly(hydroxyethyl methacrylate)-g-polylactide, a “bottle-brush brush”. During lactide polymerization, the film thickness increased by 250%, which corresponds to a substantial extension of the poly(hydroxyethyl methacrylate) backbone. A side reaction involving transesterification of polylactide side chains limits the growth in film thickness at long reaction times.
5.1
Introduction
The preparation of polymer brushes on solid surfaces has been of great interest because of their potential as sensing layers, anti-corrosion layers, for controlling the wetting of surfaces, and for preparing nanostructured surfaces [1]. More than two decades ago, DeGennes developed a model for understanding polymer brush systems and suggested the synthesis of polymer brushes from surface-immobilized initiators [2]. According to Milner’s definition, polymer brushes are long-chain polymer molecules attached by one end to a surface or interface by some means, with a density of attachment points high enough so that the chains are obliged to stretch away from the interface, sometimes much farther than the typical unstretched size of a chain [3]. Initially, the preparation of polymer brushes relied on the strong, selective adsorption of one block of a block copolymer from a polymer solution. Desorption of polymer from the surface and the low areal density of adsorbed polymer chains on sur-
106
5 Bottle Brush Brushes: Ring-Opening Polymerization
faces spurred synthetic chemists to devise new methods for the synthesis of dense, well-defined ensembles of polymers covalently bound to surfaces. In order to obtain homogeneous polymer brushes, the grafting density must be high and uniform, the polydispersity (PDI) of the polymers should be near 1 [4], and all chains must be terminally grafted onto surfaces. The two principal strategies for attaching polymer brushes to surfaces are the “grafting to” technique [5], which involves the covalent tethering of preformed polymer chains from solution to a surface, and the “grafting from” technique pioneered by Sogah [6], in which polymerization occurs from surface-anchored initiators. The two methods have both advantages and disadvantages. In the “grafting to” approach, the polymer can be fully characterized in terms of its chemical structure and size prior to immobilization on the surface, but polymer– polymer interactions hinder the formation of high-density brushes. The growth of polymers from surface-bound initiators avoids limitations on the density of chains anchored to surfaces, but characterization of the chemical structure and molecular weight are more difficult. Relatively dense brushes have been prepared using free radical [7–10], cationic [11,12], anionic [13,14], ring-opening [15], and ring-opening metathesis [16–18] polymerization. With the adaptation of atom transfer radical polymerization (ATRP) to surface polymerizations [19–24], both the breadth of monomers that can be used to prepare brushes and control over the polymer architecture improved. However, one limitation of all surface growth processes is that while the number of initiating sites on surfaces can be well-characterized, their efficiency is difficult to assay. We have adopted ATRP for the growth of polymer brushes from surfaces. In an early example [25], we initiated polymerization of methyl methacrylate from initiators anchored to a layer of sputtered Au deposited on silicon wafers. After polymerization, the surface-anchored chains and initiators were cleaved from the gold surface with I2, and the cleaved products were directly analyzed by gel permeation chromatography (GPC). From the known surface area and film thickness, and by assuming that the dried film has the same density as poly(methyl methacrylate) (PMMA) homopolymer, it was found that ~1 in 10 initiator sites led to high molecular-weight polymer (>30 000 g mol–1). The fate of the remaining initiator sites was unclear, and it was surmised that they were either buried in the polymer and inaccessible to catalyst and monomer, or lost through termination and chain transfer reactions, both of which are well-known limitations of conventional free radical polymerizations. The results of further studies by the present authors [26] and others [27] point to termination as being the primary loss mechanism. This was not unexpected, as the initial state of the system is a dense, two-dimensional array of initiator sites exposed to monomer and catalyst – conditions that favor bimolecular termination via coupling and disproportionation. The implication of these results for the conformation of polymer brushes is that it will be difficult to obtain dense arrays of fully extended of chains on flat surfaces using ATRP or free radical polymerizations. Another strategy for generating extended polymer chains is to adopt a two-step approach inspired by the properties of poly(hydroxyethyl methacrylate) (PHEMA) grown from gold surfaces [28]. Aqueous polymerization of hydroxyethyl methacrylate (HEMA) is rapid, and leads to polymer brush layers approaching 1 lm in thick-
5.1 Introduction
ness. The resulting PHEMA brushes are particularly interesting as the pendent hydroxy groups are easily functionalized using standard organic chemistry. Furthermore, infra-red (IR) characterization of PHEMA films before and after functionalization shows that nearly all of the alcohols are chemically accessible and converted to products. Functionalization of the hydroxy groups of PHEMA films also increased the film thickness. As shown in Scheme 5.1, a 176 nm-thick PHEMA brush increased to 358 nm after esterification with cinnamoyl chloride.
Scheme 5.1 Extension of PHEMA brushes via functionalization. The filled squares represent groups added to the polymer using simple chemical reactions, causing a change in film thickness of Dt.
The increase in thickness is comparable to the increase in mass per repeat unit, assuming complete conversion of the hydroxy groups to cinnamate esters. Since the hydroxy groups are regularly distributed along the PHEMA chain and the cinnamate groups are relatively small, the increase in thickness must also represent an extension of the main chain of the polymer brush. Further extension of the brush could be achieved by increasing the size of the added group, and for the case reported here, by using the hydroxy group of the HEMA repeat unit to initiate a ring-opening polymerization (ROP) of a cyclic ester such as lactide (Scheme 5.2). The sequential combination of two controlled polymerization techniques, ATRP of HEMA and ROP of lactide, should lead to a bottle-brush brush – a polymer brush where each anchored polymer chain has a bottle brush architecture, with the length of the PHEMA backbone and polylactide (PLA) bristles controlled by the polymerization time. Polymerization of macromonomers [29] and ATRP from a PHEMA derivative [30] have been used previously to prepare nontethered bottle brush copolymers. There are a limited number of reports devoted to surface-initiated ROP of cyclic esters. Husemann et al. used this technique to graft poly(e-caprolactone) from hydroxy-terminated self-assembled monolayers (SAMs) as a step in a soft lithography patterning scheme [15]. Two recent examples of the surface-initiated ROP of lactides
107
108
5 Bottle Brush Brushes: Ring-Opening Polymerization
Scheme 5.2
The synthetic route to bottle-brush
brushes.
were reported by Choi [31] and MJller [32]. In both cases, PLA was initiated from -OH or -NH2 groups at the termini of long-chain alkyl thiolates on gold or silicate surfaces. These examples are comparable to polymerization from a dense layer of initiators, and should lead to linear polymers. If PHEMA films functioned similarly and initiated solely from a thin surface layer, one should expect formation of a linear block copolymer with a relatively low grafting density. A comparison of the contact angles for water on PHEMA [33], 63K, and on an x-hydroxyalkyl thiolate SAM [34], 34K, suggests that the surface density of PHEMA -OH groups is less than full surface coverage. However, based on our earlier results on the functionalization of PHEMA films, we expected that subsurface -OH groups would increase the grafting efficiency and produce a comb-like structure. To prepare the surface-anchored PLA film, a layer of PHEMA on gold was synthesized by ATRP, and then ROP was used to grow PLA from the PHEMA layer. We were able to effect controlled increases in film thickness from several nanometers up to 450 nm The PHEMA-g-PLA system on gold has several important features. Polymer layers on gold are chemically homogeneous and are compatible with a wide variety of thin film characterization techniques. Compared to thiolate on gold SAMs, PHEMA films grown from initiators anchored on gold are more thermally robust due to a small amount of transesterification during HEMA polymerization. The resulting crosslinks enhance the mechanical stability of PHEMA films, and provide the thermal stability needed to support lactide polymerization. (The Au–S bond is unstable above ~60 KC [17,35,36], and organic monolayers often detach from surfaces.) Finally, the PHEMA-g-PLA system is a biocompatible hydrogel [37] that can be used as a drug delivery system [38–41].
5.2 Synthesis of PHEMA-g-PLA
5.2
Synthesis of PHEMA-g-PLA
The synthesis of PHEMA-g-PLA tethered to a gold surface is outlined in Scheme 5.3. In a typical procedure ATRP of HEMA was initiated from the surface-bound initiator layer using a catalyst system prepared from a mixture of Cu(I)Br/tris-[2(dimethylamino)ethyl]amine (Me6TREN) (0.1 mol% based on monomer) and Cu(II)Br2/2 equiv. of 4,4¢-di-n-nonyl-2,2¢-bipyridine (dnNbpy). The Cu(II) complex (30 mol%, relative to Cu(I)) ensures the deactivation of active radicals, and also provides some control over the polymerization. The dormant a-bromocarbonyl initiator was activated by immersing substrate 1 in a 5:1 (v/v) CH3CN-THF solution of 3.5 m HEMA and the copper catalyst. Polymerizations of HEMA were run at room temperature,
Scheme 5.3
Preparation of PHEMA-g-PLA.
with the thickness of the PHEMA film controlled by the reaction time. After HEMA polymerization, the substrate was washed sequentially with DMF, EtOH, EtOAc, EtOH and deionized water, and then dried under a stream of nitrogen. The formation of PHEMA was apparent from the appearance of a carbonyl peak at 1733 cm–1 and a broad hydroxy peak at 3200–3600 cm–1 in the reflectance FT-IR spectrum (Figure 5.1, spectrum (a)). A number of PHEMA substrates were prepared to sup-
109
110
5 Bottle Brush Brushes: Ring-Opening Polymerization
Figure 5.1 Reflectance FT-IR spectra of (a) 2: a grafted PHEMA layer (174 nm) on gold; (b) 3: a grafted PHEMA (170 nm)-g-PLA (29 nm) layer prepared using 90 min of lactide polymerization; (c) 3: a grafted PHEMA (173 nm)-gPLA (127 nm) layer prepared using 180 min of lactide polymerization; (d) 3: a grafted PHEMA
(178 nm)-g-PLA (179 nm) layer prepared using 240 min of lactide polymerization; and (e) 3: a grafted PHEMA (178 nm)-g-PLA (409 nm) layer prepared with 480 min of lactide polymerization. For clarity, the 2700–3700 cm–1 region in each spectrum is magnified five-fold relative to the remainder of the spectrum.
port kinetic experiments of the ROP of lactide from PHEMA. The PHEMA films on these substrates all had similar ellipsometric thicknesses (174 € 2 nm). Using the hydroxy groups of PHEMA side chains as initiators, rac-lactide was polymerized in toluene at 95 KC using Sn(2-ethylhexanoate)2 (Sn(Oct)2) as the catalyst. The polymerizations were run in a drybox in order to avoid contamination from water, which can act as a competing initiator. At regular intervals, samples were removed for IR and film thickness measurements. The IR spectra in Figure 5.1 show the growth of PLA on PHEMA. The initial spectrum (a) showed a single carbonyl peak at 1733 cm–1 from PHEMA, but after 90 min of lactide polymerization, the carbonyl peak broadened (Figure 5.1, spectrum (b)) and shifted to higher wavenumbers. Eventually, the PLA carbonyl peak dominated the spectrum, and only a single peak at 1767 cm–1 was observed (Figure 5.1, spectrum (e)). Parallel growth in the methyl stretching peak at 2993 cm–1 and a slight decline of the hydroxy peak at 3200–3600 cm–1 relative to the methyl stretching peak also confirmed PLA formation. Note that since PLA chains prepared by the ROP of lactide are terminated by hydroxy groups, the absolute number of hydroxy groups in the brush should be conserved. The growth of PLA chains was monitored by following the change in film thickness with time. Each sample was characterized by reflectance FT-IR and ellipsometric data collected at three different spots on the sample. The net increase in thickness due to the PLA, calculated by subtracting the thickness of the PHEMA film from the total film thickness, is plotted in Figure 5.2 (line (a)). The homoge-
5.2 Synthesis of PHEMA-g-PLA
Figure 5.2 Plot of PLA thickness versus polymerization time using: (a) 174 € 2 nm-thick PHEMA substrates; and (b) 49 € 1 nm-thick PHEMA substrates. Ellipsometric thicknesses were measured at three different spots on a sample, and the error bars are smaller than the symbols.
neous ROP of lactide follows a “coordination-insertion” mechanism [42], and the data of Figure 5.2 (line (a)) show the expected linear increase in film thickness with polymerization time, thus confirming that the polymerization of lactide from PHEMA is a living process and follows first-order kinetics. The data also show the presence of a short induction time before the onset of PLA polymerization. Similar induction times, which were observed for solution polymerizations of lactide [43], may be related to the time needed to form the alkoxy-Sn complex from Sn(Oct)2 and the hydroxy group of PHEMA. Two control experiments showed that the PLA only initiates from the -OH group of the HEMA repeat unit. In the first experiment, the hydroxy groups of PHEMA were blocked by acetylation with acetyl chloride. Substrates with PHEMA and acetylated PHEMA films were placed in the same vial with rac-lactide and Sn(Oct)2 at 95 KC for 12 h. As shown in Figure 5.3, the IR spectrum of the PHEMA substrate (spectrum (b)) shows the expected changes after ROP of lactide, an increase in the carbonyl peak intensity, its shift from 1733 cm–1 to 1767 cm–1, and a slight decrease in the hydroxy peak at 3200–3600 cm–1. However, the IR spectrum of the substrate with acetylated PHEMA shows no sign of PLA growth (spectrum (d)). Similarly, the behavior of substrates with PHEMA and PMMA [17] films were compared using the same conditions as before. As seen in Figure 5.4, the polylactide grew from the PHEMA layer, while the PMMA control showed no PLA growth. Instead of growing PLA, a decrease in IR intensity suggests that some of PMMA chains desorbed from surface under the polymerization conditions. PLA was grown from PHEMA layers of different thicknesses, with the growth rate being extracted from the linear portion of thickness versus time curves (Figure 5.2). PLA grew at a rate of 9.8 O min–1 from a 174 nm-thick PHEMA film, and at 2.4 O min–1 from a 49 nm-thick PHEMA film. The ratio of the rates (4.1) is similar to the ratio of the film thicknesses (3.6), which suggests that the -OH groups of
111
112
5 Bottle Brush Brushes: Ring-Opening Polymerization
Figure 5.3 Reflectance FT-IR spectra of: (a) a surface-grafted PHEMA layer on gold; (b) after lactide polymerization from PHEMA; (c) a surface-grafted acetylated-PHEMA layer; and (d) after attempted lactide polymerization from acetylatedPHEMA.
Figure 5.4 Reflectance FT-IR spectra of: (a) a surface-grafted PMMA layer on gold; (b) after attempted lactide polymerization from PMMA; (c) a surface-grafted PHEMA layer; and (d) after lactide polymerization initiated from PHEMA.
PHEMA are accessible, and that ROP of lactide was initiated from most -OH groups. If initiation were restricted to a thin surface layer of -OH groups, then the rate of film growth should be independent of the PHEMA thickness. Acetylation studies also are consistent with the view that most of the -OH groups of PHEMA are accessible to reagents. As shown in Figure 5.3, spectrum (c), the absence of a signifi-
5.2 Synthesis of PHEMA-g-PLA
cant -OH peak in the FT-IR spectrum of PHEMA films after reacting with acetyl chloride indicates near-complete acylation of PHEMA. Thus, the structure of PHEMA-g-PLA should be viewed as a graft copolymer with comb-like character. As ROP of lactide continues, the tethered PHEMA chains must extend to accommodate the volume occupied by the PLA. Eventually, PHEMA chains would fully extend and, for steric reasons, PLA growth in the interior of the film would cease. Kinetically, this transition should be manifested as a sharp decrease in the rate of ROP of lactide to that which corresponds to polymer growth from a surface layer. Using PHEMA substrates of 49 € 1 nm thickness, we extended the polymerization time to test for such a change in growth rate at long times. As seen in Figure 5.2(b), PLA growth eventually stopped at ~10 h; however, the 130-nm increase in thickness seemed too small to be ascribed to full extension of the PHEMA chain, given our estimate of ~10% initiator efficiency as in the related PMMA system. By assuming a cross-sectional area for PHEMA which was twice that of PMMA, we expected to realize a fully extended PHEMA chain when the increase in thickness was >250 nm. This corresponds to a degree of polymerization for lactide of at least five. Further investigation showed that the termination of growth seen in Figure 5.2(b) is consistent with equilibrium polymerization, where the propagation and depropagation rates are identical [44–46]. The polymerization solution was slightly viscous, and characterization of the solution by 1H NMR revealed a 79:21 mixture of soluble PLA homopolymer and monomer. The concentration of monomer calculated from the NMR data (~0.03 M) is in good agreement with literature values for the equilibrium monomer concentration in lactide polymerizations: for polymerization of l-lactide in 1,4-dioxane, [M]eq ~0.15 M at 406 KK and 0.06 M at 353 KK [44]. To prove equilibrium control, we isolated a sample that had grown to a limiting PLA film thickness (131 nm), washed it with solvent, and then transferred it to a vial contain-
Scheme 5.4
Intermolecular transesterification of PHEMA-g-PLA.
113
114
5 Bottle Brush Brushes: Ring-Opening Polymerization
ing fresh monomer solution with catalyst. As expected, PLA growth resumed, and an additional 53 nm of PLA was added over a 5-h period. The growth of polymer in solution requires free initiator, but the control experiments described earlier showed no evidence for PLA in solution. The initiation of ROP of lactide by adventitious H2O in the solvent or on the surface of the glassware seems unlikely, given the control experiments and our efforts to exclude H2O by working in a drybox, using anhydrous solvents, and silanizing reaction vials – all conditions that lead to successful living anionic polymerizations. Since Sn(Oct)2 also catalyzes transesterification reactions, a more plausible explanation is that transesterification involving neighboring chains forms crosslinks and releases the tin alkoxide species into solution where it can further initiate polymerization of lactide (Scheme 5.4).
5.3
Conclusions and Implications for Future Studies
We successfully initiated ROP of lactide from PHEMA brushes and observed an apparent 250% elongation of the PHEMA chain. The observed growth in thickness is consistent with our earlier estimates that ~1 in 10 initiators in SAMs lead to high molecular-weight polymer, and suggests that the conformation of methacrylate brushes grown by ATRP falls between that of random coils and fully elongated chains. At 250% elongation, the kinetic data indicate that the PHEMA chains are not yet fully extended. Establishment of an equilibrium between monomer and polymer in the polymerizing solution is consistent with the film thickness being limited by transesterification reactions involving the PHEMA side chains. Preliminary data show that isolation of the bottle brush brushes and reinitiating polymerization with fresh monomer will enable further extension of the chains. The full characterization of PHEMA-based bottle brush brushes is hindered by crosslinking, presumably via transesterification, during the growth of PHEMA films. When treated with I2, PHEMA films detach from the surface as coherent films that swell, but do not dissolve. The use of a HEMA monomer with a masked hydroxy group should preclude crosslinking, but the monomer must be chosen carefully in order to retain the potential advantages of aqueous polymerization [47]. The choice of polymer used for the bristles of the bottle brush brushes is also important. For polymerization from gold substrates, low- temperature polymerizations are needed to avoid thermally induced desorption of polymers from the surface. In addition, the high concentration of growing chains in bottle brush schemes precludes the use of free radical and other polymerization techniques that have substantial contributions from bimolecular termination and chain transfer reactions.
5.4 Experimental Section
5.4
Experimental Section 5.4.1
Materials
THF (Aldrich, 99%) and toluene (Aldrich, 99.5%) were distilled from calcium hydride followed by a second distillation from sodium/benzophenone ketyl. 3,6-Dimethyl-1,4-dioxane-2,5-dione (lactide; Aldrich, reagent grade) was recrystallized three times in ethyl acetate. Other ACS reagent grade solvents were used as received without further purification. Gold-coated Si wafers (200 nm of gold sputtered on 20 nm of Cr on Si(100) wafers) were cleaned in a UV/O3 chamber for 15 min, immersed in deionized water for 15 min, and dried under a flow of N2 just before use. 5.4.2
Preparation of Monomer Solution and Substrates
The monomer solution was prepared in a drybox as follows. Lactide was added to toluene (120 mL) and vigorously stirred at room temperature for 1 h using a magnetic stirrer. Stirring was stopped and the clear solution (determined to be ~0.13 M by gravimetry) was decanted from undissolved lactide. Sn(Oct)2 (0.0844 g) was added to the lactide solution (100 mL) to give a final catalyst concentration of ~2.1 mM. The initial organic monolayer, 1, was prepared using a literature procedure [25]. PHEMA substrate, 2, was synthesized by surface-initiated atom transfer radical polymerization. 5.4.3
Ring-Opening Polymerization from PHEMA Surface
ROP of lactide was carried out in a drybox filled with helium. The PHEMA substrates, 2, were immersed in the solution of lactide and Sn(Oct)2 catalyst. Silanized glass vials (15 mL) were used as reaction vessels. Polymerizations were run at 95 KC in an oil-bath, and samples were removed at intervals for kinetic studies. As the samples were taken out from the solution, they were sequentially immersed in a series of vials containing toluene, ethyl acetate, ethanol, and deionized water to clean the surface. The surface was dried under a flow of N2 and characterized by reflectance FT-IR and ellipsometry. 5.4.4
Analytical Methods
Reflectance FT-IR spectroscopy was performed using a Nicolet Magna-IR 560 spectrometer containing a PIKE grazing angle (80K) attachment. Ellipsometric measurements on polymer films were obtained with a rotating analyzer ellipsometer (model M-44; J. A. Woollam) at a 75K angle of incidence.
115
5 Bottle Brush Brushes: Ring-Opening Polymerization
116
Acknowledgments
The authors thank the NSF Center for Sensor Materials at Michigan State University for financial support of this research.
References 1 B. Zhao, W. J. Brittain, Prog. Polym. Sci. 2 3 4 5 6 7
8 9 10
11 12 13 14
15
16
17
2000, 25, 677. P. G. De Gennes, Macromolecules 1980, 13, 1069. S. T. Milner, Science 1991, 251, 905. N. Dan, M. Tirrell, Macromolecules 1993, 26, 6467. K. Bridger, B. Vincent, Eur. Polym. J. 1980, 16, 1017. W. R. Hertler, D. Y. Sogah, F. P. Boettcher, Macromolecules 1990, 23, 1264. O. Prucker, C. A. Naumann, J. RThe, W. Knoll, C. W. Frank, J. Am. Chem. Soc. 1999, 121, 8766. B. Peng, D. Johannsmann, J. RThe, Macromolecules 1999, 32, 6759. M. Niwa, M. Date, N. Higashi, Macromolecules 1996, 29, 3681. B. de Boer, H. K. Simon, M. P. L. Werts, E. W. van der Vegte, G. Hadziioannou, Macromolecules 2000, 33, 349. R. Jordan, A. Ulman, J. Am. Chem. Soc. 1998, 120, 243. B. Zhao, W. J. Brittain, J. Am. Chem. Soc. 1999, 121, 3557. N. Tsubokawa, H. Ueno, J. Appl. Polym. Sci. 1995, 58, 1221. R. Jordan, A. Ulman, J. F. Kang, M. H. Rafailovich, J. Sokolov, J. Am. Chem. Soc. 1999, 121, 1016. M. Husemann, D. Mecerreyes, C. J. Hawker, J. L. Hedrick, R. Shah, N. L. Abbott, Angew. Chem., Int. Ed. 1999, 38, 647. W. A. Herrmann, A. W. Stumpt, T. Priermeier, S. Bogdanovic, V. Dufaud, J.-M. Basset, Angew. Chem., Int. Ed. Engl. 1997, 35, 2803. N. L. Jeon, I. S. Choi, G. M. Whitesides, N. Y. Kim, P. E. Laibinis, Y. Harada, K. R. Finnie, G. S. Girolami, R. G. Nuzzo, Appl. Phys. Lett. 1999, 75, 4201.
18 M. R. Buchmeiser, F. Sinner, M. Mupa,
K. Wurst, Macromolecules 2000, 33, 32. 19 M. Husseman, E. E. Malmstroem, M. McNa-
mara, M. Mate, D. Mecerreyes, D. G. Benoit, J. L. Hedrick, P. Mansky, E. Huang, T. P. Russell, C. J. Hawker, Macromolecules 1999, 32, 1424. 20 X. Huang, M. J. Wirth, Macromolecules 1999, 32, 1694. 21 M. Ejaz, S. Yamamoto, K. Ohno, Y. Tsujii, T. Fukuda, Macromolecules 1998, 31, 5934. 22 X. Huang, L. J. Doneski, M. J. Wirth, Anal. Chem. 1998, 70, 4023. 23 K. Matyjaszewski, P. J. Miller, N. Shukla, B. Immaraporn, A. Gelman, B. B. Luokala, T. M. Siclovan, G. Kickelbick, T. Vallant, H. Hoffmann, T. Pakula, Macromolecules 1999, 32, 8716. 24 R. R. Shah, D. Merreceyes, M. Husemann, I. Rees, N. L. Abbott, C. J. Hawker, J. L. Hedrick, Macromolecules 2000, 33, 597. 25 J.-B. Kim, M. L. Bruening, G. L. Baker, J. Am. Chem. Soc. 2000, 122, 7616. 26 J. B. Kim, W. X. Huang, M. D. Miller, G. L. Baker, M. L. Bruening, J. Polym. Sci., Part A: Polym. Chem. 2003, 41, 386. 27 D. Q. Xiao, M. J. Wirth, Macromolecules 2002, 35, 2919. 28 W. Huang, J.-B. Kim, M. L. Bruening, G. L. Baker, Macromolecules 2002, 35, 1175. 29 H. G. Borner, K. Beers, K. Matyjaszewski, S. S. Sheiko, M. Moller, Macromolecules 2001, 34, 4375. 30 S. C. Hong, D. Neugebauer, Y. Inoue, J. F. Lutz, K. Matyjaszewski, Macromolecules 2003, 36, 27. 31 I. S. Choi, R. Langer, Macromolecules 2001, 34, 5361. 32 M. MJller, F. Nederberg, L. S. Lim, R. KWnge, C. J. Hawker, J. L. Hedrick, Y. Gu, R. Shah,
References
33 34 35
36 37 38
39
N. L. Abbott, J. Polym. Sci,. Part A: Polym. Chem. 2001, 39, 3529. H. Lim, Y. Lee, S. Han, J. Cho, K.-J. Kim, J. Vac. Sci. Technol., A 2001, 19, 1490. A. G. Frutos, J. M. Brockman, R. M. Corn, Langmuir 2000, 16, 2192. C. D. Bain, E. B. Troughton, Y. T. Tao, J. Evall, G. M. Whitesides, R. G. Nuzzo, J. Am. Chem. Soc. 1989, 111, 321. J. B. Schlenoff, M. Li, H. Ly, J. Am. Chem. Soc. 1995, 117, 12528. D. W. Lim, S. H. Choi, T. G. Park, Macromol. Rapid Commun. 2000, 21, 464. I. Barakat, P. Dubois, C. Grandfils, R. Jerome, J. Polym. Sci., Part A: Polym. Chem. 1999, 37, 2401. M. Iijima, Y. Nagasaki, T. Okada, M. Kato, K. Kataoka, Macromolecules 1999, 32, 1140.
40 T. Riley, S. Stolnik, C. R. Heald, C. D. Xiong,
41
42 43 44 45 46 47
M. C. Garnett, L. Illum, S. S. Davis, S. C. Purkiss, R. J. Barlow, P. R. Gellert, Langmuir 2001, 17, 3168. I. Barakat, P. Dubois, R. Jerome, P. Teyssie, E. Goethals, J. Polym. Sci., Part A: Polym. Chem. 1994, 32, 2099. K. Stridsberg, M. Ryner, A.-C. Albertsson, Macromolecules 2000, 33, 2862. M. Yin, G. L. Baker, Macromolecules 1999, 32, 7711. A. Duda, S. Penczek, Macromolecules 1990, 23, 1636. K. Majerska, A. Duda, S. Penczek, Macromol. Rapid Commun. 2000, 21, 1327. H. Nishida, M. Yamashita, T. Endo, Y. Tokiwa, Macromolecules 2000, 33, 6982. D. M. Jones, W. T. Huck, Adv. Mater. 2001, 13, 1256.
117
119
6
Preparation of Well-Defined Organic-Inorganic Hybrid Nanostructures using Living Cationic Surface-Initiated Polymerization from Silica Nanoparticles Il-Jin Kim, Su Chen, and Rudolf Faust
Abstract
Structurally well-defined polymer/inorganic nanocomposites were prepared by surface-initiated living cationic polymerization of isobutylene (IB). The living cationic polymerization of IB was initiated from initiators self-assembled on the surface of silica nanoparticles in the presence of additional soluble “free initiator” with TiCl4 in methylcyclohexane:CH3Cl (60:40, v/v) at –80 -C. The polymerization displayed the diagnostic criteria for living cationic polymerization, and provided densely grafted polymers of controlled molecular weight with an approximate graft density of 3.3 chains per nm2. The surface-initiated polymerization of IB without added “free initiator” also yielded grafted polymer chains with good molecular weight control and narrow molecular weight distribution (Mw/Mn). The polymer-nanoparticle hybrids were characterized by thermogravimetry, gel permeation chromatography, and dynamic light scattering measurements.
6.1
Introduction
Organic-inorganic nanocomposites have been attracting much attention due to their potential applications, such as colloid stabilizers, electro-optical devices, and nanocomposite materials [1–4]. There are several techniques for attaching polymer chains to nanoparticle surfaces, including chemisorption [5], covalent attachment of end-functionalized polymers to a reactive surface (“grafting to”) [6], and in-situ monomer-by-monomer growth of polymer chains from immobilized initiators (“grafting from”) [7,8]. Among these methods, the “grafting from” approach offers the most promising route to achieve maximum structural control. For the preparation of polymer brushes, a living polymerization technique is the most desirable, due to its feasibility to control the molecular weight, molecular weight distribution and composition of surface-initiated polymers. Recently, several research groups have reported the use of controlled/living polymerizations to fabricate well-defined polymer-nanoparticle hybrid materials by anionic [9], radical [10,11], and ring-open-
120
6 Preparation of Well-Defined Organic-Inorganic Hybrid Nanostructures
ing polymerization (ROP) [12]. Living cationic surface-initiated polymerization (LCSIP), however, remains relatively unexplored for the preparation of nanocomposite materials. Recently, we have reported that polymer brushes with high graft density could be prepared by employing self-assembled covalently attached initiators on flat silicon substrates in the presence of added free initiator for the living cationic polymerization of isobutylene [13]. Since a flat silica surface has a low surface area, corresponding to low concentration of initiating sites on the substrates, it was necessary to add a predetermined amount of “free initiator” to the reaction mixture to maintain controlled growth of polymer from the flat surface. The direct synthesis of polymer brush on the surface might be interesting by surface-initiated living polymerization without using sacrificial free initiator if we choose high surface area substrates. In this chapter, we report preliminary results on the synthesis of well-defined polymernanoparticle hybrid materials by living cationic surface-initiated polymerization, and the effects of free initiator on the polymerization kinetics and molecular control.
6.2
Experimental Section 6.2.1
Materials
Methyl chloride (MeCl) and isobutylene (IB) were dried in the gaseous state by passing them through in-line gas-purifier columns packed with BaO/Drierite. They were condensed in the cold bath of a glovebox prior to polymerization. Methylcyclohexane (MeChx, 99% anhydrous; Aldrich), 2,6-di-tert-butylpyridine (DTBP, 99.4% by GC; Aldrich), and titanium(IV) chloride (TiCl4, 99.9%; Aldrich) were used as received. Spherical silica nanoparticle sol (organo silicasol MEK-ST; Nissan Chemical Industries) dispersed in methylethyl ketone, MEK (30 wt.%, diameter = 21.8 nm, specific surface area = 202 m2 g–1) was dried over CaH2 in a Soxhlet extractor for 48 h at room temperature under a vacuum providing gentle reflux. The average particle diameter in the anhydrous silica MEK sol (37.15 wt.%) was 24.6 nm, determined by Microtrac UPA. 6.2.2
Characterization
Molecular weights were measured using a Waters HPLC system equipped with a Model 510 HPLC pump, a Model 250 dual refractometer/viscometer detector (Viscotek), a Model 486 UV/Vis detector, a Model 712 sample processor, and five ultra-Styragel GPC columns connected in the following series: 500, 103, 104, 105, and 100 L. Tetrahydrofuran (THF) was used as eluent at a flow rate of 1.0 mL min–1. The particle sizes and distributions were measured by dynamic light scattering (DLS) using a
6.2 Experimental Section
Microtrac UPA analyzer. The samples of PIB nanocomposites were dissolved in THF to adjust the solid content to around 0.5 wt.% and placed directly in the cell. The temperature of the cell was kept at around 25 -C, and the measuring time was in the range of 60 to 180 s. 6.2.3
Synthesis of Immobilized Macroinitiators
Spherical silica nanoparticles with a narrow size distribution and an average diameter of 24.6 nm, determined by DLS measurement, were used to prepare polymernanoparticle hybrids. The immobilization of chlorosilyl functional initiator, 3-(1chlorodimethyl-silylmethyl)ethyl-1-(1-chloro-1-methyl)ethyl-benzene (CECE) on the particle surface was accomplished by adding CECE (6 mM) dissolved in anhydrous CH2Cl2 containing DTBP (6 mM) into a 250-mL flask, followed by addition of silica sol in MEK. The reaction mixture was stirred vigorously at room temperature overnight in a glovebox. After the condensation reaction of CECE with silanol groups on the surface of the silica nanoparticle, dried MeChx was added to the mixture and the solvent system of CECE-modified nanoparticles was changed into good solvent (MeChx) for the living cationic polymerization via vacuum distillation. CECE-modified nanoparticles were fully resuspended in MeChx without losing some “clumped” materials. Unreacted residual free initiator was removed by repeated suspension and ultracentrifugation (six times). To the resulting surface-modified silica nanoparticles additional “free initiator” (0.83 mM) was added. DLS measurement of CECEmodified particles showed an average diameter of 26.7 nm; thus, the particles remained nonagglomerated. A slight increase in the average diameter with respect to the starting silica nanoparticles was within the measurement error.
Scheme 6.1
Synthetic scheme of structurally well-defined PIB-silica nanoparticle hybrids.
121
122
6 Preparation of Well-Defined Organic-Inorganic Hybrid Nanostructures
6.3
Results and Discussion 6.3.1
Living Cationic Surface-Initiated Polymerization of IB from Silica Nanoparticles in the Presence of Sacrificial Free Initiator
Our initial studies to control polymer chain growth from the silica macroinitiators without added “free initiator” were successful due to the sufficiently high concentration of initiating sites. When the particle size is much larger, however, the addition of a predetermined amount of “free initiator” to the reaction mixture is desirable [10,11], to ensure molecular weight control. It is generally assumed that the molecular weights of the surface-bound and free polymer are identical. To determine if this is also valid in our case, the surface-initiated polymerization of IB was carried out using silica nanoparticle macroinitiators (4.46 g L–1) in conjunction with “free initiator” CECE (0.85 mM), TiCl4 (0.072 M) and DTBP (3 mM) in MeChx:CH3Cl (60:40, v/v) at –80 -C (Scheme 6.1). The polymerization was then started by injection of IB (1.43 M). After a predetermined reaction time, samples were quenched with anhydrous and prechilled methanol. Since the free PIB formed in the solution is extremely sensitive to moisture, the chloro head-group of polymer chain was replaced with stable butyl-group by addition of nBuLi. Isolation of free PIB (60 wt.%) from surface-bound PIB (40 wt.%) was achieved by a series of extraction and ultracentrifugation steps in hexanes (10 times). Thermogravimetric analysis (TGA) of PIB hybrid nanoparticles revealed that the amount of grafted polymer on the silica particle surface was ca. 89.5% by mass. In contrast to most published examples, where the nanoparticles are the major component (ca. 80~96 wt.%), the Results for the polymerization of IB with chlorosilyl functional initiator (CECE)-modified silica nanoparticlesa).
Table 6.1
Reaction time (min)
Conversion (%)
Mnb)
Mw/Mnb)
Mnc)
Mw/Mnc)
10 20 30 45 60 75
47.14 77.83 88.01 96.01 100 100
32 48 54 56 56 56
1.69 1.42 1.40 1.41 1.40 1.39
36 56 58 62 66 65
1.68 1.41 1.34 1.36 1.32 1.29
a)
b) c)
300 400 800 500 700 800
Reaction conditions: [TiCl4] = 72 mM; [DTBP] = 3 mM; [CECE] = 0.85 mM; [Silica Macroinitiators] = 0.48 mM; [IB] = 1.43 M; MeChx:CH3Cl (60:40, v/v) at –80 -C. Polymer formed from the additional “free initiator” in the solution, obtained by GPC with standard polystyrene as reference. Surface-bound polymer cleaved from the silica nanoparticle surface by etching with aqueous HF (5%) for 6 h at room temperature.
300 400 300 900 000 200
6.3 Results and Discussion
PIB-silica nanoparticle hybrids in our system consisted of 89.5 wt.% PIB and 10.5 wt.% silica particle. These hybrids were inorganic nanoparticle-modified polymers rather than polymer-modified nanoparticles. In order to gain insight into the polymer growth characteristics of the surface-initiated polymerization, the surface-bound PIB was cleaved from the silica nanoparticle surface by etching with aqueous HF (5%) for 6 h at room temperature. The results of characterization for both the cleaved graft polymer and the free polymer simultaneously formed from the additional “free initiator” are summarized in Table 6.1. It can be seen that the molecular weights (Mn) of the cleaved graft polymer and the free polymer are nearly identical, both increasing with increasing monomer conversion. The molecular weight distributions (Mw/Mn) remain fairly low, with increasing monomer conversion. All these results are in good agreement with previous reports [10,11]. Comparison of GPC traces of cleaved PIB and free PIB is shown in Figure 6.1. On the basis of weight percent of surface-bound PIB (40 wt.%) and PIB molecular weight, we calculated a grafting density of 3.3 PIB chains per nm2. This grafting density is very high, and similar to those reported from Patten et al. where grafting densities of approximately 2–5 initiators per nm2 were obtained [10]. This result can be compared to the generally accepted hydroxyl group density of five hydroxyl groups per nm2 on the silica surface [14]. From the grafting density, the concentration of silica-bound initiator (that actually initiates polymerization) of 0.48 mM can be calculated. To examine the living characteristics of the polymerization, ln([M]o/[M]) versus time and Mn versus conversion plots were constructed. The first-order kinetic plot of ln([M]o/[M]) versus reaction time for the polymerization of IB in the presence of silica macroinitiators and free initiator is depicted in Figure 6.2. The semilogarithmic dependence ln([M]o/[M]) on time is straight-line from almost the very beginning of the polymerization, which indicates that the concentration of the propagating spe-
Figure 6.1 Comparison of GPC traces of cleaved PIB and free PIB. Polymerization conditions: [Silica macroinitiators] = 0.48 mM; [CECE] = 0.85 mM; [TiCl4] = 0.072 M; [DTBP] = 3 mM; [IB] = 1.43 M in MeChx:CH3Cl (60:40, v/v) at –80 8C.
123
124
6 Preparation of Well-Defined Organic-Inorganic Hybrid Nanostructures
First-order kinetic plot of ln([M]o/ [M]) versus time for the polymerization of IB with added “free initiator” from the surface of 20-nm CECE-functionalized silica. Conditions:
Figure 6.2
[Silica macroinitiators] = 0.48 mM; [CECE] = 0.85 mM; [TiCl4] = 72 mM; [DTBP] = 3 mM; [IB] = 1.43 M in MeChx:CH3Cl (60:40, v/v) at –80 8C.
cies is constant (absence of irreversible termination) throughout the course of both solution and surface-initiated polymerization. The number-average molecular weight (Mn) of free PIB and silica-bound PIB versus conversion plots are shown in Figures 6.3 and 6.4, respectively. The linear plot of Mn versus conversion plot demonstrates the absence of chain transfer. The molecular weight (Mn) of the grafted polymer and free PIB, as determined using GPC, are close to the theoretical line calculated from the total initiator concentration (0.48 mM + 0.86 mM) (the solid lines in Figures 6.3 and 6.4). The corresponding Mw/Mn values decrease with increased conversion, as is generally encountered in controlled/living cationic polymerization. Figure 6.5 summarizes an ability to control the hydrodynamic diameter of the polymer chains (as measured by DLS) by varying the molecular weight (Mn). In agreement with kinetic studies, the thickness of the PIB chains is a linear function of the degree of the polymerization of the polymer formed on the silica surface, corresponding to the growth of a layer of densely grafted polymer chains.
Mn (j) and Mw/Mn (s) of PIB obtained from free initiator versus conversion plots for the polymerization of IB with added “free initiator” from the surface of 20-nm CECE-functionalized silica.
Figure 6.3
6.3 Results and Discussion
Figure 6.4 Mn (d) and Mw/Mn (s) of cleaved PIB from silica surface versus conversion plot for the polymerization of IB with added “free initiator” from the surface of 20-nm CECE-functionalized silica.
Figure 6.5 Variation in hydrodynamic diameter of PIB-nanoparticle hybrid with molecular weight of PIB formed from the silica surface.
6.3.2
Living Cationic Surface-Initiated Polymerization of IB from Silica Macroinitiators
Based on the polymer growth characteristics of the surface-initiated polymerization and the graft density of polymer chain from the silica nanoparticles in the presence of free initiator described above, it is possible to design well-defined polymerization system without “sacrificial” free initiator. Contrary to flat substrates and the large spherical particles, silica particles with a sufficiently small diameter can provide a sufficiently high concentration of initiating site in polymerizations and allow the polymerization to proceed in a controlled fashion. First, the surface-initiated polymerization of IB from the 20-nm silica nanoparticle macroinitiators (4.46 g L–1) was carried out using the same procedure as described above, except that the surfacebound initiators were only used as initiator. The results of the surface-initiated polymerization of IB are summarized in Table 6.2. Polymerization of IB from silica nanoparticles exhibited good molecular control
125
126
6 Preparation of Well-Defined Organic-Inorganic Hybrid Nanostructures Summary of molecular weight and molecular weight distribution for the surface-initiated polymersa).
Table 6.2
Sample
Reaction time (min)
Conversion (%)
Mnb)
Mw/Mnb)
1 2 3 4 5
5 10 20 30 45
65.18 92.10 100 100 100
25 38 39 42 47
1.56 1.39 1.41 1.38 1.28
a)
b)
000 800 500 800 900
Reaction conditions: [TiCl4] = 72 mM; [DTBP] = 3 mM; [IB] = 1.43 M; [Silica Macroinitiators] = 2 mM; MeChx:CH3Cl (60:40, v/v) at –80 -C. Polymer formed from silica nanoparticle macroinitiators.
and narrow molecular weight distribution, with increased conversion for the grafted polymer samples. The first-order kinetic plot of monomer conversion for the polymerization of IB with immobilized initiators under the specified condition is shown in Figure 6.6. The linear relationship reveals that the number of active chains is constant (absence of irreversible termination). It can be also observed that the rate of polymerization, as calculated from the slope of the figure, in the absence of free initiator is slightly higher than that in the presence of the free initiator. Figure 6.7 shows Mn and Mw/Mn of the cleaved graft PIB from the silica nanoparticle surface based on monomer conversion. The linear plot of Mn versus conversion plot demonstrates the absence of chain transfer. The experimental molecular weights of the cleaved graft polymer exhibited close to theoretical Mn (Mn theoretical = 40 000, Mn experimental = 43 000) indicating close to 90% initiator efficiency (Ieff ) and narrow molecular weight distributions reaching 1.3~1.4 at complete IB conversion. This implies that most of the initiator sites on the nanoparticle surface initiated the growth of polymer chains. Since polymer growth from the high surface area substrates (i.e., small-diameter spheres and highly porous materials) might be quite dif-
First-order kinetic plot of ln([M]o/[M]) versus time for the polymerization of IB with silica-bound macroinitiators in MeChx:CH3Cl (60:40, v/v) solvent mixture at –80 8C.
Figure 6.6
6.3 Results and Discussion
Mn (d) and Mw/Mn (s) versus conversion plots in the polymerization of IB with silica-bound macroinitiators in MeChx:CH3Cl (60:40, v/v) solvent mixture at –80 8C.
Figure 6.7
ferent from growing polymers from low surface area substrates (i.e., flat surface, large-diameter spheres, and low-porous materials), it is possible to reduce the steric hindrance of growing polymer chain on the curved surface of 20-nm diameter particle [15]. All of these results confirm that the polymerization of IB from the 20 nmdiameter particle surface exhibited the characteristics of a living polymerization.
Summary
We presented the first report on surface-initiated cationic polymerization of IB from functionalized silica nanoparticles. Structurally well-defined PIB/nanoparticle hybrid materials can be prepared by using silica macroinitiators in the presence of added “free initiator”. The polymerization displayed the diagnostic criteria for living cationic polymerization and provided densely grafted polymers of controlled molecular weight with an approximate graft density of 3.3 chains per nm2. Due to a high surface area of the 20 nm-diameter particles, the surface-initiated polymerization of IB from the immobilized macroinitiators without added “free initiator” also exhibited good molecular weight control and narrow molecular weight distribution. Efforts are under way to extend the utility of LCSIP to other homo- and copolymers.
127
6 Preparation of Well-Defined Organic-Inorganic Hybrid Nanostructures
128
References 1 E. P. Giannelis, R. Krishnamoorti, E. Man2 3 4
5 6 7 8 9
ias, Adv. Polym. Sci. 1999, 138, 107–147. M. Baum, W. J. Brittain, Macromolecules 2002, 35, 610–615. J. Pyun, K. Matyjaszewski, Chem. Mater. 2001, 13, 3436–3448. S. G. Boyes, W. J. Brittain, X. Weng, S. Z. D. Cheng, Macromolecules 2002, 35, 4960–4967. P. Auroy, L. Auvray, L. Leger, J. Colloid Interface Sci. 1992, 150, 187–194. J. M. Jethmalani, W. T. Ford, Chem. Mater. 1996, 8, 2138–2146. O. Prucker, J. RShe, Macromolecules 1998, 31, 592–601. O. Prucker, J. RShe, Macromolecules 1998, 31, 602–613. Q. Zhou, S. X. Wang, X. W. Fan, R. Advincula, J. Mays, Langmuir 2002, 18, 3324–3331.
10 T. von Werne, T. Patten, J. Am. Chem. Soc.
2001, 123, 7497–7505. 11 M. Husseman, E. E. Malmstroem, M. McNa-
mara, M. Mate, D. Mecerreyes, D. G. Benoit, J. L. Hedrick, P. Mansky, E. Huang, T. P. Russell, C. J. Hawker, Macromolecules 1999, 32, 1424–1431. 12 R. Jordan, N. West, A. Ulman, Y.-M. Chou, O. Nuyken, Macromolecules 2001, 34, 1606– 1611. 13 I.-J. Kim, R. Faust, J. Macromol. Sci., Pure Appl. Chem. 2003, 40(10), 991–1008. 14 S. A. Asher, J. Holtz, J. Weissman, G. Pan, Mater. Res. Soc. Bull. 1998, 23, 44–50. 15 R. Jordan, A. Ulman, J. F. Kang, M. H. Rafailovich, J. Sokolov, J. Am. Chem. Soc. 1999, 121, 1016–1022.
129
7
Photoinitiated Polymerization from Self-Assembled Monolayers Daniel J. Dyer, Jianxin Feng, Charles Fivelson, Rituparna Paul, Rolf Schmidt, and Tongfeng Zhao
Abstract
A review of recent results on photochemical surface-initiated polymerization is presented. The synthesis of polymer brushes by “grafting from” approaches is discussed, with an emphasis on free radical initiating systems that are similar in structure to 2,2¢-azobisisobutyronitrile. Three different thio-based initiators were discussed, and the grafting kinetics from gold substrates examined. It was found that the growth kinetics for polystyrene brushes exhibits a multi-stage behavior that is consistent with the gel, or Trommsdorf effect. Film thicknesses from 40 to 200 nm thickness were observed, and the molecular weight was found to be relatively independent of film thickness. Grafting densities as high as 1.8 nm2 per chain were observed.
7.1
Introduction
The design and synthesis of functional organic thin films is an important goal in modern polymer science. Polymer brushes offer a unique approach to the synthesis of well-defined structures with controlled functionality [1–4]. In particular, “grafting from” (GF) strategies, or surface-initiated polymerization (SIP), offer distinct advantages over alternative modes of deposition such as spin casting or the “grafting to” (GT) approach. For instance, a cast film is merely adsorbed, or physisorbed, to a surface and may delaminate under various conditions, particularly in organic solvents. Polymers that are “grafted to” a substrate are more robust and may stretch away from the substrate when the grafting density is high. However, the GT technique typically yields low-density polymer brushes because, once grafted, the chains inhibit the diffusion of additional reactive polymers to the active functional groups at the surface. In contrast, the GF technique utilizes a polymer initiator that is covalently linked to the surface so that polymer grows out away from the substrate and always remains tethered (Figure 7.1). These inorganic/organic polymer composite films will play an important role in many
130
7 Photoinitiated Polymerization from Self-Assembled Monolayers
Figure 7.1
Grafting from strategy for synthesizing polymer brushes from self-assembled monolayers.
emerging fields, including the design of novel biomaterials [5,6] for tissue engineering [7,8], drug delivery [8–13], implants and cell adhesion [14–16], and protein recognition [17]. Other areas that will be affected by this technology include adhesion and wetting [17–19], microfluidics [20], microfabrication [19,21,22], molecular recognition [17,23], chemical sensing [21,24], and organic synthesis [22,23,25]. Self-assembled monolayers (SAMs) offer a convenient approach to modify inorganic substrates such as gold, glass, or oxidized silicon [26]. In the SAM technique, a pre-cleaned inorganic substrate is immersed into a dilute organic solution of reactive molecules that assemble onto the substrate and form covalent bonds. Typically, these are amphiphilic molecules with long chains and a polar head group that has an affinity for the inorganic substrate. For example, alkyl thiols will form S-Au bonds, yielding densely packed monolayers when the alkyl chains are greater than ten carbons in length; similarly, glass and silicon may be modified with chlorosilanes or alkoxysilanes. The SAM formation is confirmed by a variety of techniques including contact angle measurements [27], ellipsometry [28,29], reflection-absorption infrared spectroscopy (RAIRS) [30], surface plasmon resonance (SPR) [30,31], and X-ray photoelectron spectroscopy (XPS) [30]. SAMs may be designed so that the terminal groups at the air or liquid interface consist of functionalities that may initiate a polymerization. Upon immersion into a suitable monomer solution, the initiators may then be activated either thermally or photochemically to yield a grafted polymer film. After polymerization, a simple rinsing step will remove most of the untethered polymer that is physisorbed to the substrate. However, it is usually necessary to immerse the substrate into a series of organic solvents, or to use a Soxhlet extraction in order to remove the remaining physisorbed polymer. Polymer brushes have been synthesized by a variety of initiating mechanisms including anionic [32,33], cationic [34,35], ring-opening (ROP) [36–39], ring-opening metathesis (ROMP) [40], free radical [41–47], controlled radical [48–58], enzymatic [59], and organometallic [60] catalysts. Radical polymerization, whether from a normal free radical or a controlled process, is preferred for many applications due to a tolerance for moisture, and a wide variety of organic functional groups. Furthermore, photochemistry is a convenient method for the initiation of free radicals. In particular, it allows for the lithographic patterning of planar substrates and in-situ polymerizations within ordered liquid crystalline materials [61–65]. In this chapter, we review some of the previous work on photochemical SIP from various SAM-coated substrates. We exclude much of the work with thermal or chemical initiators, except where it exhibits clear advantages or introduces alternative pho-
7.2 Substrates
tochemical techniques. We also present recent results from our group on photochemical initiators from alkylthiolate SAMs on planar gold.
7.2
Substrates 7.2.1
Silicon, Silica and Glass
Silicon wafers are the most common substrates for SIP experiments as they are commercially available and relatively smooth and reflective. The surface of these substrates consists of a thin layer of silicon oxide with dangling Si-OH bonds. Thus, treatment with chlorosilanes or alkoxysilanes will form polysiloxane networks that are covalently linked to the native SiOx surface via strong Si-O-Si bonds. Chlorosilanes are more reactive, particularly with water, and generally form less-ordered SAMs than alkoxysilanes; thus, alkoxysilanes are utilized more often as they are less reactive and readily stored. Importantly, the synthesis of alkoxysilane derivatives is more straightforward and amenable to various transformations and purification techniques, including chromatography on modified silica [66]. The chemical preparation of SAMs on glass is virtually identical to that of silicon. While glass is optically transparent and is easily characterized by UV-visible spectroscopy, it yields poor IR spectra due to the high number of Si-O vibrations. In contrast, silicon is more amenable to IR and ellipsometry characterization, but is not optically transparent. Siloxane-based SAMs are quite stable, both thermally and chemically [67]. They are difficult to hydrolyze with acid or base due to the strong Si-O-Si bond, but can be removed with HF treatments. Therefore, polymer may be removed for gel permeation chromatography (GPC) analysis, provided that the polymer is also stable to hydrolysis. In addition, the initiators can be designed to include ester or amide linkages that may be hydrolyzed after polymerization. Some of the earliest attempts at SIP were from free radical initiators attached to silica gel [68–76]. This high surface area substrate ensures a high polymer loading compared to planar substrates. Although others have tethered initiators to silica microspheres and glass fibers [77], silicon wafers remain the substrate of choice for photoinitiated polymerizations [78–80].
7.2.2
Planar Gold
Gold is easily deposited onto silicon or glass by evaporation or sputtering. Since gold does not adhere well to these substrates, a thin layer of titanium or chromium is added to promote adhesion. The predominant crystal structure is Au(111), and the typical thickness of the gold layer is ~100 nm. SAMs are easily deposited by immersing the gold substrates into a dilute solution (~0.1–1.0 mM) of thiol or disulfide pre-
131
132
7 Photoinitiated Polymerization from Self-Assembled Monolayers
cursors. The adsorption kinetics depend on the structure of the precursor, but are generally rapid. However, bulky structures may take several hours to yield densely packed SAMS; our depositions are typically performed overnight. Furthermore, it is not clear if densely packed monolayers are necessary for SIP as the surface area of a polymer chain should be much greater than that of a single initiator molecule within the SAM. Gold is an excellent substrate for SIP for several reasons [81]. First, alkylthiolates are readily adsorbed from solution or the vapor phase. Second, gold substrates are easily characterized by optical techniques such as RAIRS or ellipsometry. Third, alkylthiolate SAMs may be removed from gold by treatment with iodine or by electrochemical desorption. Therefore, the detached polymer may be characterized by techniques such as GPC or multi-angle light scattering (MALS) [82,83]. Fourth, planar gold may be patterned by microcontact printing (lCP) [67,84,85]. This technique utilizes an “inked” polydimethylsiloxane (PDMS) stamp to deposit alkylthiols at well-defined positions on the gold surface. Subsequent polymerization yields polymer brushes in regions that are controlled by the lCP process. An approach for patterning planar gold by combining lCP with photolithography is illustrated in Figure 7.2 [81,86]. First, a PDMS stamp is inked with a SAM initiator precursor and stamped onto the gold with a predefined pattern. Second, a lithographic mask is used to create a secondary polymer brush pattern by irradiating in the presence of monomer. Thus, polymer is deposited only in the regions that were irradiated. Third, a second mask could be used with a different monomer to add another polymer to the pattern. Such patterning would be more difficult with thermal initiation strategies. In addition, thermal initiation is limited by the instability of the S-Au bond, which is unstable above 70 KC. Furthermore, the resolution is limited by the lCP technique, which typically yields patterns from 10 to 100 lm. New strategies are under development for the patterning of gold at submicron resolution. In particular, dip-pen nanolithography (DPN) utilizes an AFM tip to deposit thiols at nanometer resolution [87]. Alternatively, nanocontact printing (nCP) has been used to pattern hyperbranched polymers at 50-nm resolution [88]. These techniques could be modified to pattern photoinitiators for brush synthesis. Furthermore, electron beam chemical lithography (EBCL) was recently described, whereby a SAM is modified with a focused beam of electrons [89]. The irradiated SAM is then chemically modified to produce an azo polymer initiator; brush patterns with lateral resolutions approaching 70 nm have been observed with EBCL. These techniques, and others, will play an important role in the development of new thin-film technologies.
Figure 7.2 Photopatterning of substrates with microcontact printing and surface-initiated polymerization.
7.3 Photoinitiated Radical Polymerization Mechanisms
7.2.3
Nanoparticles
The modification of nanoparticles has become an increasingly important goal in polymer science owing to their unique quantum-size effects [90–93]. The synthesis of polymer-modified nanoparticles is complicated by the fact that it is usually desirable to isolate the nanoparticles. Thus, normal free radical polymerization is unsuitable as polymer is also formed in the bulk; therefore, the nanoparticles would be embedded in the bulk polymer and would be difficult to separate. For this reason, a controlled polymerization must be used to obtain well-defined coatings and narrow size distributions. In particular, atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain transfer (RAFT) polymerization have been used to modify gold [94–96] and silica [97] nanoparticles. In addition, cationic ROP has been used to synthesize 2-oxazoline-substituted gold nanoparticles [35]. While photoinitiated strategies have been lacking, a recent report demonstrated the synthesis of PMMA from a photoinitiator bound to silica nanoparticles [98].
7.3
Photoinitiated Radical Polymerization Mechanisms 7.3.1
Free Radicals
The most widely used polymer initiators are based on free radicals, as they tolerate water as well as a wide variety of organic functional groups. Typically, these polymerizations are very rapid owing to fast propagation kinetics [99]. The reactive monomers usually include a substituted double bond, where acrylates, methacrylates, and vinylarenes are commonly used. The initiating systems for free radical polymerization are diverse as illustrated in Figure 7.3. Among the most common are 2,2¢-azobisisobutyronitrile (AIBN) (1), benzoyl peroxide (2), and benzoin (3) derivatives. Of these three compounds, only AIBN has been utilized in GF strategies for polymer brush synthesis [1,74,76,78,79,100–102], although peroxides have been generated with plasma treatments [103,104]. In particular, AIBN may be activated thermally above 60 KC, or photochemically by irradiating at 300–360 nm. However, in both cases the initiation step is relatively slow; for instance, AIBN has a half-life of 10 h at 65 KC [105], and the photochemical efficiency is less than 0.5 in styrene [106]. Thus, new surface radicals are continuously formed throughout the course of the reaction. A surface-bound AIBN initiator before and after thermal or photochemical activation is depicted in Scheme 7.1. In both cases, homolytic cleavage of the azo bond yields nitrogen as a byproduct and two radicals, both of which may initiate a polymerization. Importantly, only one of the initiating radicals is bound to the surface, and therefore polymer is always formed in the bulk. This bulk polymer will become entangled with the tethered polymer and will also adsorb onto the brush surface. Thus, a rigorous post-polymerization cleaning step is necessary to remove the physi-
133
134
7 Photoinitiated Polymerization from Self-Assembled Monolayers
Figure 7.3 Known free-radical photochemical initiators. (a) AIBN-type initiators (1) have been incorporated into self-assembled monolayers (SAMs); others such as benzoyl peroxide (2) or benzoin (3) could be modified for SAM deposition. (b) A photosensitizer could extract
a proton from a hydroxyl terminated SAM, yielding an initiating radical at the surface and a ketyl radical that prefers self-condensation. (c) Iniferter strategies might yield well-controlled polymerizations and block copolymers.
Scheme 7.1 Mechanism of free radical polymerization from surface-bound 2,2¢-azobisisobutyronitrile (AIBN) initiators.
sorbed polymer from the chemisorbed brush. This extra cleaning step represents a major disadvantage for the free radical initiators described in Figure 7.3(a). 7.3.2
Photosensitizers
One possible strategy to minimize the formation of bulk polymer is to utilize a photosensitizer [107]. Figure 7.3(b) demonstrates how a triplet sensitizer such as benzophenone (4) may be used to abstract a hydrogen atom from an amine or a secondary alcohol (5) to yield two radicals, 6 and 7 [108]. Importantly, the ketyl radical 7 is unreactive towards monomer, and typically dimerizes to form benzopinacole-type structures. In contrast, the hydroxyl radical (6) initiates the polymerization
7.4 Polymerization from AIBN-type SAMs
of vinyl and acrylate radicals. Thus, polymer does not form in the bulk and arises solely from the surface-bound radical 6. This strategy has not been utilized for the synthesis of polymer brushes, although appropriate studies are currently in progress within our group. 7.3.3
Photo-Iniferters
The radicals from photosensitizers or the decomposition of AIBN will yield uncontrolled polymerizations with high polydispersities. Furthermore, these strategies do not allow for the synthesis of block copolymers. Thus, living polymerizations would be ideal as they allow for the synthesis of well-defined polymers with specific end groups [109–111]. Unfortunately, “living” nitroxide-mediated polymerizations [112] require temperatures in excess of 70 KC, and cannot be used for gold due to the thermally labile S-Au bond. While ATRP methods [113–115] may be activated at room temperature, neither of these “living” techniques may be initiated photochemically. An iniferter is an initiating molecule that also acts as a chain transfer agent and a terminating species (iniferter: initiator-transfer-terminator) [108]. Iniferters may be used to initiate well-controlled polymerizations, yielding homopolymers, copolymers, or block copolymers with low polydispersities. Figure 7.3(c) illustrates a dithiocarbamate photo-iniferter (8) that has been used to synthesize block copolymers [116]. Upon irradiation, 8 will dissociate into a highly reactive benzyl radical (9) and a noninitiating thiyl radical (10). Importantly, radical 10 periodically caps the reactive end and terminates the propagation step. The iniferter capped polymer may absorb another photon and dissociate again to allow additional chain growth. Since the dithiocarbamate is relatively stable, the polymer may be isolated and additional monomer may then be added to grow block copolymers. Indeed, iniferters have been used for the synthesis of polymer brushes by the GF strategy [98,117–119]. These types of initiators will undoubtedly play a major role in future polymer brush syntheses.
7.4
Polymerization from AIBN-type SAMs 7.4.1
Design and Synthesis
Our recent investigations have been focused on thiolate SAMs with AIBN-type initiators as described in Scheme 7.2. The synthesis of initiator 12 has been described previously, and was accomplished by coupling 1,10-decanedithiol with the acid chloride of 4,4¢-azo-bis-(cyanopentanoic acid) [101]. Note that 12 has two thiol groups and may bind to Au by a fully extended structure with a terminal thiol at the air interface, or by a bent structure where both of the thiols are bound to Au. The results of our previous studies have suggested that the favored binding is the
135
136
7 Photoinitiated Polymerization from Self-Assembled Monolayers
Scheme 7.2 Self-assembled monolayer (SAM) forming free radical photoinitiators based on 2,2¢-azobisisobutyronitrile (AIBN).
extended structure with a sulfur terminus at the air interface [101]. The terminal thiol group and the internal thioesters could potentially act as chain transfer agents and thereby inhibit polymer growth from the surface. In order to determine the effects of sulfur and chain transfer on these polymerizations, we designed two other SAM initiator systems, 16 and 19 [120]. In particular, initiator 16 does not exhibit a terminal thiol, so the radical that diffuses from the initial cleavage will not act as an efficient chain transfer agent. However, the surface-bound radical includes a thioester and the sulfur bound to gold, both of which could participate in chain transfer. Control experiments with octadecanethiolate monolayers indicate the SAMs are stable under these reaction conditions; thus, it is unlikely that the S-Au bond plays a role. In order to probe the effect of the thioester, we synthesized compound 19. The SAMs resulting from this disulfide should be similar to both 12 and 16, but without the terminal sulfur or the thioester. As Scheme 7.2 illustrates, compound 16 was synthesized from 4,4¢-azo-bis (cyanopentanoic acid) (13) in two steps: first, 13 was treated with DCC/DMAP and butanol to form the monobutyl ester (14) in 42% yield, followed by a second esterification with 1,10-decanedithiol to give 16 in 20% yield. Disulfide 19 was also synthesized in two steps: first, 11-mercaptoundecanol (17) was treated with iodine to yield disulfide (18) in 95% yield. This was then coupled with 14 and DCC/DMAP to give 19 in 20% yield.
7.4 Polymerization from AIBN-type SAMs
7.4.2
Monolayer Characterization
The SAMs were adsorbed onto Au-coated silicon wafers according to standard procedures. The resulting monolayers were characterized by water contact angle, RAIRS, XPS, and ellipsometry. In particular, the SAM of 12 was described previously and exhibits a static water contact angle of ~64K, consistent with a terminal thiol group. Furthermore, the water contact angle for 16 and 19 increased to 77K and 78K, respectively, suggesting a more hydrophobic surface and consistent with terminal butyl esters. The elemental composition of the SAMs was probed by XPS and was also consistent with the expected structures for all three monolayers. The thickness of each SAM was calculated using a semi-empirical PM3 model, and yielded values of 4.0, 3.15, and 3.3 nm for 12, 16, and 19, respectively. These values were close to the optical thickness measured by ellipsometry of 3.2, 2.5, and 2.0 nm for 12, 16, and 19, respectively. In addition, the calculated tilt angle (h) for 12 and 16 was ~37K, suggesting a fairly disordered monolayer; the tilt of a highly crystalline octadecanethiol SAM is ~30K. The calculated tilt for 19 is quite high at 52K, and suggests a very disordered, low-density SAM. One possible reason for this disorder is that the initiator structure is chiral and consists of a mixture of diastereomers. The lowest energy conformations calculated for two diastereomers of model compound (20) are illustrated in Figure 7.4. In particular, the (R,R) diastereomer exhibits a bent shape, whereas the (R,S) diastereomer prefers an extended structure and is about 0.2 kcal mol–1 more stable than the (R,R). Importantly, the (S,R) diastereomer would be expected to from densely packed monolayers with low tilt angles and a relatively high degree of crystallinity compared to the more bulky (R,R) diastereomer. It seems reasonable that a moderate degree of disorder in the SAM probably will not impact the polymerization or the resulting brushes to a great extent, as the surface area of a tethered polymer chain is much larger than that of a single SAM molecule.
Figure 7.4 Conformations of two diastereomers of an AIBN model compound (20). (Semi-empirical PM3 geometry optimization).
137
138
7 Photoinitiated Polymerization from Self-Assembled Monolayers
Figure 7.5 Fourier transform-reflection-absorption infrared spectroscopy (FT-RAIRS) spectra of a SAM of disulfide (19), monothiol (16), and bisthiol (12).
Nevertheless, it would be interesting to separate the diastereomers in order to probe this effect, and this investigation is planned for the future. Infrared spectroscopy was also used to confirm formation of the SAMs. The RAIR spectra of monolayers of disulfide (19), monothiol (16), and bisthiol (12) are shown in Figure 7.5. The carbonyl bands are evident for all three compounds, with 16 exhibiting two bands due to the presence of the ester (1739 cm–1) and thioester (1690 cm–1) moieties. For all three monolayers, the symmetric and asymmetric methylene bands are at approximately 2853 and 2925 cm–1, respectively. This suggests a disordered, liquid-like state for the SAMs and is consistent with the large calculated tilt angles; a highly crystalline SAM exhibits an asymmetric methylene stretch at ~2918 cm–1 [26]. The asymmetric CH3 band is also present in 16 and 19 at 2968 cm–1, which is consistent with a methyl-terminated SAM. 7.4.3
Polymerization of Styrene
Prior to polymerization, the SAM formation was confirmed by contact angle and RAIRS. The polymerizations were carried out in Schlenk tubes with neat styrene after three consecutive freeze-pump-thaw cycles. The tubes were back-filled with argon and irradiated at 300 nm (~650 lW cm–2) for a specified period of time. After polymerization, the substrates were removed and rinsed with tetrahydrofuran (THF) or toluene. This first rinse is sufficient to remove most of the physisorbed polymer, but it is also necessary to perform a Soxhlet extraction or to immerse the substrates into a series of clean solvents in order to remove the remaining physisorbed polymer that might have become entangled within the brush during the polymerization. The presence of a polystyrene (PS) brush is clearly evident in the RAIR spectrum (Figure 7.6) after cleaning. In addition, the static water contact angle of 88 € 2K is
7.4 Polymerization from AIBN-type SAMs
Figure 7.6 Fourier transform-reflection-absorption infrared spectroscopy (FT-RAIRS) spectrum of a polystyrene brush.
consistent with spun films of PS, as is the XPS spectrum. RAIRS may be used to gain a qualitative picture of the film growth, whereas ellipsometry is used to gain a more quantitative value for the film thickness. As illustrated in Figure 7.7, the film
Figure 7.7 Effect of reaction time on brush thickness for initiator SAMs of: (a) disulfide 19; (b) monothiol 16; and (c) bis-thiol 12.
139
140
7 Photoinitiated Polymerization from Self-Assembled Monolayers
growth was monitored as a function of time by ellipsometry. Interestingly, the disulfide initiator (19) yielded a maximum thickness of ~100 nm, whereas 12 and 16 terminated at ~200 nm. The most rapid growth was seen with the bisthiol initiator (12), which was closely matched by monothiol initiator (16). The film growth in all cases is nonlinear, suggesting that the increase in thickness is not directly correlated to an increase in molecular weight, which would be expected to increase linearly. It is postulated that the multistage growth is largely due to an increase in the density of grafted chains rather than to a simple increase in the kinetic chain length of tethered polymer chains. It is interesting to note that polymer growth from the disulfide initiator 19 is much slower than from 12 or 16. In particular, the PS thickness for 19 after 8 h of irradiation was only about 10 nm, whereas the thickness for both 12 and 16 was ~115 nm. In addition, after 16 h initiator 19 had a thickness of only 25 nm as compared to 200 nm for 12, which had already terminated. It is believed that the primary reason for this slow growth is the poor quality of the disulfide SAMs, which limits the number of initiators and reduces the grafting density of tethered polymer. For example, in Figure 7.5 the methylene bands are very weak for 19 compared to the other initiators. Repeated attempts to improve the SAM by varying solvents and deposition conditions proved unsuccessful. One possible reason lies in the rather bulky structure of the disulfide. In particular, it is hypothesized that after the initial adsorption of a low-density monolayer, diffusion of 19 to the gold surface is inhibited due in part to the bulky nature of the diastereomeric disulfide structure, much in the same way that the GT technique is limited for brush synthesis [121]. Compounds 12 and 16 are much smaller, and therefore they may penetrate the low-density SAM to form a more extended, high-density structure. While simple long-chain disulfides, such as C18, may form high-quality monolayers, from our experience more complex disulfides are less likely to form high-quality SAMs than thiol-terminated compounds of similar structure. In order to gain more insight into the growth of these films, we removed the polymer from the gold substrates and used GPC and MALS to determine the Mn. Removal is easily accomplished by treating the substrates with a solution of iodine in THF. Typically we used three to four substrates in separate Schlenk tubes, and then combined them before treating with iodine. It should be noted that this oxidative cleavage forms a disulfide between neighboring S-Au chains; therefore, it is possible that two high-Mn chains were coupled together and the experimental Mn is larger than the true Mn expected for a single chain. However, reduction of the disulfide with sodium borohydride yielded little change in the Mn of the polymer; thus, it is likely that the large chains couple with a neighboring chain that is either an unreacted initiator or a small oligomer. In all cases, the polydispersity for tethered PS and polymer recovered from the bulk was ~2, which is typical for these conditions. Interestingly, the increase in Mn of the detached polymer from 12 increases only slightly from 2 to 18 h, as illustrated in Figure 7.8. In particular, the Mn increases by ~40% over this time frame, whereas the film thickness increases by ~470%. Furthermore, the increase in Mn from 2 to 6 h is ~14%, and from 6 to 18 h is 22%; however,
7.4 Polymerization from AIBN-type SAMs
Figure 7.8
Comparison of polymer brush thickness with molecular weight (Mn) for initiator 12.
the film thickness increases by 85% and 200% over the same time intervals, respectively. Surprisingly, the middle segment from 7 to 10 h exhibits a 130% increase in film thickness, whereas the Mn is nearly constant, increasing by a mere 3%. Clearly, the increase in Mn from 2 to 18 h for the detached polymer does not correlate with the observed increase in film thickness. The film thickness appears to increase much more rapidly than Mn during the first two stages of the polymerization. Thus, the growth of the film is relatively independent of the Mn, which is fairly constant regardless of reaction time. This is not so surprising, as a free-radical chain polymerization is characterized by rapid growth, followed by termination. In the present case, the AIBN-type initiator is not very efficient and has a long half-life. Therefore, chains are initiated at all stages of the polymerization and most likely grow rapidly and then terminate after a relatively short period of time. Based on this behavior, we propose a four-stage growth model for the free radical polymerization of styrene from AIBN-type SAMs; we use initiator 12 as an example. The initial stage is characterized by the rapid growth of a low-density polymer brush. The film growth then slows down during the second stage, from 1 to 7 h. During this period, the grafting density reaches a point where interchain termination becomes more favorable than in the low-density brush. The third stage is characterized by a rapid acceleration in film growth (7–10 h). We hypothesize that at the onset of the third stage, the grafted chains are sufficiently crowded that termination is inhibited due to the so-called gel effect, also known as the Trommsdorf effect [122]. This has two consequences: first, the rate of polymerization is accelerated, leading to faster growth kinetics. Second, the grafting density increases rapidly, and this forces the chains to stretch away from the surface at an accelerated rate. The
141
142
7 Photoinitiated Polymerization from Self-Assembled Monolayers
fourth stage is characterized by a rapid termination of film growth as saturation is reached and monomer no longer diffuses to the surface. This multi-stage growth has precedence in the literature for both GT and GF approaches. In particular, ROhe has described the photopolymerization of PS from siloxane-based SAMs [80]. The film thickness was only monitored for up to 4 h and resulted in a thickness of ~30 nm in neat styrene; this is close to our observations for both 12 and 16, which exhibited a thickness of 45 and 59 nm, respectively. Similarly, polymerizations from gold with a thiolate initiator yielded PS films of ~300 nm after 12 h, compared to 180 nm for 12 over the same time frame [86]. The larger thickness is likely due to the fact that we irradiated at 300 nm with an intensity of ~0.65 mW cm–2 compared to 350 nm and 30 mW cm–2 used by ROhe. Thus, their experiments were at a much higher intensity, which is also closer to the kmax of AIBN. However, it should also be noted that thermal polymerizations with similar initiators do not exhibit an accelerated growth period that is as dramatic as with photoinitiated polymerizations [123]. Interestingly, this multi-stage growth behavior is also fairly consistent with theoretical and experimental investigations on GT systems. In particular, Penn and coworkers described a three-stage growth model for the grafting of amino-terminated PS to an epoxide-terminated siloxane SAM [124]. Their observations and descriptions of the kinetics of film growth are remarkably similar to ours. However, the GF technique that we use yields faster grafting kinetics by an order of magnitude. For instance, the saturation point for a 44-kDa PS brush was reported at ~116 h (at 100 KC) compared to ~12 h for a 200-kDa brush (at 25 KC) with initiator 12. Clearly, further experimental and theoretical investigations must be conducted to carefully examine the kinetics of grafting and the accelerated film growth in polymer brushes. In addition to the film growth, the grafting density in surface area per chain (Sd, nm2 per chain) may be calculated according to Eq. (1) from the molecular weight (Mn, g mol–1), the thickness (Th, nm), density (d, g nm–3), and Avogadro’s number (Na, molecules per mol). Thus, the Sd for a 193-nm film with a Mn of 225 000 Da is calculated to be 1.85 nm2 per chain, assuming a density of 1.047 Q 10–21 g nm–3 for bulk PS. Interestingly, the theoretical length of a fully stretched chain with this Mn is 463 nm, which yields an Sd of 0.77 nm2 per chain. Furthermore, the radius of gyration (Rg) for the tethered PS in toluene is ~25 nm, as measured by MALS. Thus, the grafted PS is highly stretched, and the Sd approaches that of the theoretical limit. Sd ¼
Mn ThdNa
(1)
In general, these films are very smooth, with the surface roughness ranging from € 0.4 to 3.6 nm. Not surprisingly, the brushes from the disulfide initiator 19 were the roughest, with a r-value of € 3.6 nm, as determined by ellipsometry. The other initiators yielded better results, with standard deviations in the range of € 0.6 nm and regions as smooth as € 3.6 R. In particular, Figure 7.9 illustrates a
7.5 Conclusions and Future Studies
Figure 7.9 A topographic thickness map of a polystyrene brush with an average thickness of 140 € 0.65 nm over an area of 100 7 193 nm2. The area within the square is very smooth, with a r-value of € 4: (data acquired using ellipsometry).
100 Q 193 nm2 region of a 140 nm-thick PS brush from initiator 12. The r for this film was € 0.65 nm, with large regions as smooth as € 0.4 nm. These results are similar to initiator 16, where a 119-nm film exhibited a r -value of € 0.59 nm and regions as smooth as € 0.36 nm.
7.5
Conclusions and Future Studies
Polymer brushes are conveniently synthesized from surface-bound photoinitiators. Three AIBN-type initiators were synthesized with various amounts of sulfur, and the effect of chain transfer was found to be minimal. We propose that the disulfide (19) yields poor SAMs, and that this affects the resulting brush density, yielding thinner films than the thiol initiators 12 and 16. These data suggest that the quality of the monolayer plays an important role in the resulting polymerizations. A four-stage model was also proposed to explain the accelerated growth in the middle stages of the polymerization, namely that the gel-effect leads to acceleration in the rate of polymerization. This is concomitant with a rapid increase in grafting density. Since the Mn is fairly constant throughout the course of the polymerization, the overall film thickness is controlled more by the grafting density than by the kinetic chain length of the polymer chains. The PS films synthesized here were very smooth, with an average roughness on the order of € 0.6 nm. Furthermore, the grafting densities from initiator 12 were as high as 1.8 nm2 per chain, and are among the highest reported to date. Future investigations should be directed at the synthesis of multi-component films, particularly mixed brushes with specific response characteristics. These may include homopolymers, copolymers, ionic polymers, and liquid crystalline polymers. Furthermore, the ability to pattern substrates will play an important role in the manufacturing of new thin-film devices. Photoinitiating SAMs represent an enabling technology for the synthesis of these functional substrates. In particular, well-controlled “living”-like polymer initiators will play an increasingly important role in polymer brush synthesis. Thus, photo-iniferters should be fully explored in addition to new photosensitizer strategies. These emerging technologies promise unprecedented control of the surface architecture in the micron and nanometer domains.
143
144
7 Photoinitiated Polymerization from Self-Assembled Monolayers
7.6
Experimental 7.6.1
Initiator Synthesis
Silicon wafers (100) were used to prepare thin gold films by using 99.995+% pure Au and Cr. Styrene (Acros) was purified by passage through a column filled with Alumina A (Fisher Scientific). 11-Mercapto-1-undecanol (17) was purchased from Aldrich Chemical Company. 4-Dimethylaminopyridine (DMAP), dicyclohexylcarbodiimide (DCC), and 4,4¢-azo-bis (4-cyanopentanoic acid) (13) were purchased from Acros chemicals and used without further purification. NMR solvents were purchased from Cambridge Isotopes. Column chromatography was performed with standard grade silica gel (63–200 Mesh) from Sorbent Technologies, and TLC was performed on 250-lm silica gel 60 polyester-backed plates with F254 fluorescent indicator (Whatman). All other reagents were obtained from Acros or Fisher Scientific, and used as received. The synthesis of 4,4¢-azo-bis[(1,10-dimercaptodecyl)-4-cyanopentanoate] (12) and 1,10-dithiol-decane (15) were described previously [101]. 1H and 13C NMR data were collected on a Varian VXR-300 MHz NMR spectrometer and reference to the solvent; coupling constants (J) are in Hertz. 7.6.1.1 4-Cyano-4-(azo-[4¢-cyano-(butyl)pentanoate])-pentanoic acid (14) This compound was recently synthesized using a similar method [102]. 4,4¢-Azo-bis(4-cyanovaleric acid) (13) (5.6 g, 20 mmol), 1-butanol (1.48 g, 20 mmol), and DMAP (488 mg, 4.0 mmol) were dissolved in THF (120 mL). The reaction mixture was cooled to 0 KC in an ice bath for 15 min. DCC (4.13 g, 20 mmol) was then added, and the resulting mixture was stirred for 5 min at 0 KC and then for 15 h at room temperature. The dicyclohexylurea precipitate was filtered off, and the crude filtrate concentrated by rotary evaporation and then purified by column chromatography on silica gel (hexanes:ethyl acetate, 50:50) to yield 2.96 g (42%) of a colorless oil: RF = 0.46 (hexanes:ethyl acetate, 50:50); 1H NMR (300 MHz, CDCl3) d 0.92 (t, J = 7.3, 2H), 1.37 (m, 2H), 1.58–1.72 (m, 8H), 2.38–2.58 (m, 8H), 4.10 (t, J = 6.6, 2H); 13 C NMR (75 MHz, CDCl3) d 13.66, 19.06, 23.72 (2 C), 28.86, 29.17, 30.49, 32.91, 33.16, 65.05, 71.70, 71.85, 117.44, 117.48, 171.53, 176.48. 7.6.1.2 4-Cyano-4-(azo-[4¢-cyano-(butyl)pentanoate])-(1,10-dimercaptodecyl)pentanoate (16) Compound 14 (610 mg, 1.81 mmol), 1,10-dithiodecane (377 mg, 1.80 mmol), and DMAP (44.2 mg, 0.36 mmol) were dissolved in THF (20 mL). The reaction mixture was cooled to 0 KC (ice bath) for 15 min. DCC (370 mg, 1.80 mmol) was then added and the resulting mixture was stirred for 5 min at 0 KC and then for 15 h at room temperature. The crude mixture was concentrated by rotary evaporation and then purified by column chromatography on silica gel (hexanes:ethyl acetate, 50:50) to yield 200 mg (20%) of a colorless oil: RF = 0.66 (hexanes:ethyl acetate, 50:50). 1H NMR (300 MHz, CDCl3) d 0.89 (t, J = 7.3, 3H), 1.22–1.34 (m, 14H), 1.53–1.68 (m,
7.6 Experimental
12H), 2.35–2.71 (m, 10H), 2.84 (t, J = 6.8, 2H), 4.03–4.09 (m, 2H); 13C NMR (75 MHz, CDCl3) d 13.64, 19.03, 23.88, 23.93, 24.58, 28.27, 28.70, 28.95, 29.04, 29.07, 29.13, 29.29, 29.33, 30.48, 33.12, 33.19, 33.96, 38.32,39.08, 64.94, 71.79, 71.86, 117.36, 117.39, 171.31, 196.79; FT-IR (neat): 2936, 2858, 1761, 1731, 1592, 1493, 1456, 1296, 1193 cm–1. 11-(11-Hydroxy-undecyldisulfanyl)-undecanol (18) 11-Mercapto-1-undecanol (17) (500 mg, 2.45 mmol) was dissolved in 50 mL absolute ethanol. The solution was titrated with a saturated solution of iodine in ethanol until the brown color of iodine persisted. The solvent was removed by rotary evaporation. Water (20 mL) was added, and the solution was extracted with diethyl ether (3 Q 100 mL). Evaporation of solvent yielded 470 mg (95%) of 18 as a white solid: RF= 0.53 (EtOAc); 1H NMR (300 MHz, CDCl3) d 1.18–1.39 (m, 24H), 1.48–1.70 (m, 8H), 2.64 (t, J = 7.5, 4H), 3.63 (t, J = 6.8, 4H). 7.6.1.3
1,1¢-Bis-[4-Cyano-4-(azo-[4¢-cyano-(butyl)pentanoate])-(1-mercaptoundecyl)pentanoate]disulfanyl (19) Compound 17 (610 mg, 1.5 mmol), compound 14 (1.008 g, 3.0 mmol), and DMAP (73 mg, 0.6 mmol) were dissolved in 30 mL THF, and the solution was cooled and stirred at 0 KC. DCC (619 mg, 3.0 mmol) was added and the mixture was stirred at 0 KC for 5 min, and then at room temperature for 12 h. The crude mixture was concentrated by rotary evaporation and then purified by column chromatography on silica gel (hexane:ethyl acetate, 50:50) to yield 500 mg (33%) of an impure product as a viscous oil. The product was further purified by column chromatography on silica gel (diethyl ether:petroleum ether, 70:30) and then recrystallized from ether at low temperature (–20 KC) to yield 300 mg (20%) of a white solid: RF = 0.36 (diethyl ether:petroleum ether, 70:30); 1H NMR (300 MHz, CDCl3) d 0.91 (t, J = 7.3, 6H), 1.25–1.37 (m, 32H), 1.60–1.71 (m, 24H), 2.38–2.50 (m, 16H), 2.67 (t, J = 7.5, 4H), 4.08 (m, 8H); 13 C NMR (75 MHz, CDCl3) d 13.93, 19.32, 23.97, 24.21, 26.08, 28.74 (2C), 29.32, 29.40, 29.42, 29.46 (2C), 29.70 (2C), 29.72, 30.76, 33.40, 33.43, 39.35, 65.22, 65.51, 72.06, 72.16, 117.12, 117.80, 171.60, 171.66; FT-IR (neat) 2926, 2858, 1739, 1456, 1395, 1294, 1188 cm–1; HRMS (FAB+): calcd. 1043.5151; found, 1043.6401; Empiric analysis for C54 H90N8O8S2: calcd. C, 62.16%; H, 8.69%; N, 10.74%; S, 6.15%; found: C, 62.44%; H, 8.67%; N, 10.70%, S, 6.19%. 7.6.1.4
7.6.2
Polymerizations
The gold substrates and SAMs were prepared according to previously published procedures [101,125]. The SAM and styrene were placed into a Schlenk tube, which was degassed by using three freeze-pump-thaw cycles, and then backfilled with argon. The polymerization was performed in a Rayonet photochemical chamber at 300 nm (~650 lW cm–2) for a specified time. The chamber was cooled by air through a rubber tube attached to an air compressor. After the reaction, the gold substrates were rinsed with toluene and then extracted with a water-cooled jacketed Soxhlet appara-
145
146
7 Photoinitiated Polymerization from Self-Assembled Monolayers
tus by using toluene as solvent for 15 h. The UV intensity was measured with a Model UV-340 light meter (Digital Technologies) at 2- and 6-cm distances from the lamps, and the results averaged. 7.6.3
Reflection Absorption Infrared Spectroscopy (FT-RAIRS) Measurements
FT-RAIRS was used to generate spectra of monolayers and polymer brushes on gold substrates. This was carried out using a Nicolet-670 FT-IR spectrometer fitted with a VeeMax II variable angle attachment (Pike Technologies) set to 80K and an MCT-B detector. The sample compartment was purged with nitrogen for 20 min (flow rate: 25 ml min–1) prior to data acquisition, and a clean gold substrate was used as the background. All spectra were averaged over 650 scans, and an atmospheric suppression algorithm was utilized. 7.6.4
Ellipsometry
Thickness of the films was monitored using an I-Elli2000 imaging ellipsometer (Nanofilm Technologie, GmbH). The experiments were performed with a 20-mW Nd:YAG laser (532 nm) at an incident angle of 70K. The optical constants n and k (refractive index and extinction coefficient) were measured from bare gold. Refractive indices of 1.46 and 1.59 were used for the calculation of initiator SAMs and PS films, respectively. The films were considered to be optically transparent, and data were collected and averaged over at least five different spots per slide. At least three separate trials were averaged for each data point in Figure 7.7. Figure 7.9 represents a delta map obtained by using the Micro-Mapping feature of the I-Elli2000 software package. This delta map is transformed into a thickness map by applying the optical model used to determine the thickness of the PS layer as mentioned above. The 3-D viewer module of the I-Elli2000 software is used to obtain the final 3-D plot. 7.6.5
X-Ray Photoelectron Spectroscopy (XPS)
XPS measurements were conducted using a Kratos Axis Ultra X-ray photoelectron spectrometer. Analysis was carried out under ultra-high vacuum conditions (10–9 Torr) using monochromatic Al Ka (1486.6 eV) excitation. The hemispherical energy analyzer was operated in the hybrid mode (a combined magnetic and electrostatic lens mode) with the slot (300 lm Q 700 lm) selected area aperture. The sample stage was grounded to the spectrometer and the neutralizer was off. Spectra were collected in the constant pass energy, or fixed analyzer transmission, mode. Survey spectra were collected using a pass energy of 160 eV with a scan step size of 1 eV.
7.6 Experimental
7.6.6
Molecular Weight Measurements
The polymer was isolated from three to four PS-coated substrates (~1.8 Q 8.0 cm2) that were reacted in separate Schlenk tubes. The PS brush thickness was confirmed before the substrates were combined into a solution of iodine (4.0 mM) in dichloromethane for 10 h. The solvent was taken up by syringe and passed through a 0.2-lm Anotop syringe filter into a pear-shaped flask. The solvent was removed by rotary evaporation, and the excess iodine removed by sublimation under high vacuum. The residual polymer was taken up in 200 lL of toluene and transferred to a 300-lL autosampler vial. The molecular weights of PS were measured in toluene with a Waters Alliance 2690 separation module fitted with a Waters 2410 differential refractive index detector and a column heater set to 35 KC. Two 7.5 Q 300 mm PLgel 5-lm MIXED-C columns from Polymer Laboratories were used and calibrated with PS standards. The Rg was measured with a MiniDAWN multi angle light scattering (MALS) detector (Wyatt Technologies). 7.6.7
Molecular Modeling
Structures were determined using a semi-empirical PM3 model and the PolakRibiere optimization algorithm for isolated molecules in vacuo, performed with HyperChem v. 6.03 (Hypercube, Inc.).
Acknowledgments
The authors thank the National Science Foundation under grant CHE-0094195, 3M Corporation, the Materials Technology Center at SIUC, and the donors of the Petroleum Research Fund, administered by the American Chemical Society for partial support of this research. The XPS measurements carried out in the Center for Microanalysis of Materials at the University of Illinois, which is supported by the U.S. Department of Energy under grant DEFG02-96ER45439 and the University of Illinois. The Kratos XPS system was purchased with funds provided by the National Science Foundation under grant DMR-9977482 and by The State of Illinois.
147
7 Photoinitiated Polymerization from Self-Assembled Monolayers
148
References 1 J. ROhe, W. Knoll, J. Macromol. Sci. Polym. 2 3 4 5 6
7
8
9
10 11
12
13
14
15
16
17
18 19
Rev. 2002, C42, 91–138. B. Zhao, W. J. Brittain, Prog. Polym. Sci. 2000, 25, 677–710. Y. Nagasaki, K. Kataoka, Trends Polym. Sci. 1996, 4, 59–64. S. T. Milner, Science 1991, 251, 905–914. A.M. Rouhi, Chem. Eng. News 1999, 77, 51– 59. C. Perry, in: Chemistry of Advanced Materials: An Overview, Eds. L. V. Interrante, M. J. Hampden-Smith, Wiley-VCH, Weinheim, 1998, Chapter 11. L. E. Niklason, J. Gao, W. M. Abbott, K. K. Hirschi, S. Houser, R. Marini, R. Langer, Science 1999, 284, 489–493. S. Rimmer, in: Emerging Themes in Polymer Science, Ed. A. J. Ryan, Royal Society of Chemistry, Cambridge, 2001, Chapter 8. C. D. James, R. Davis, M. Meyer, A. Turner, S. Turner, G. Withers, L. Kam, G. Banker, H. Craighead, M. Isaacson, J. Turner, W. Shain, IEEE Trans. Biomed. Eng. 2000, 47, 17–21. R. Langer, Acc. Chem. Res. 2000, 33, 94–101. N. R. Cameron, in: Emerging Themes in Polymer Science, Ed. A. J. Ryan, Royal Society of Chemistry, Cambridge, 2001, Chapter 9. J. T. Santini, A. C. Richards, R. Scheidt, M. J. Cima, R. Langer, Angew. Chem. Int. Ed. Engl. 2000, 39, 2396–2407. B. D. Klugherz, P. L. Jones, X. Cui, W. Chen, N. F. Meneveau, S. DeFelice, J. Connolly, R. L. Wilensky, R.J. Levy, Nature Biotechnol. 2000, 18, 1181–1184. S. L. Ishang-Riley, L. E. Okun, G. Prado, M. A. Applegate, A. Ratcliffe, Biomaterials 1999, 20, 2245–2256. C. D. Tidwell, S. I. Ertel, B. D. Ratner, B. J. Tarasevich, S. Atre, D. L. Allara, Langmuir 1997, 13, 3404–3413. B. D. Ratner, A. B. Johnston, T. J. Lenk, J. Biomed. Mater. Res. Appl. Biomater. 1987, 21, 59–90. F. E. Black, M. Hartshorne, M. C. Davies, C. J. Roberts, S. J. B. Tendler, P. M. Williams, K. M. Shakesheff, Langmuir 1999, 15, 3157– 3161. P. Lenz, Adv. Mater. 1999, 11, 1531–1534. Y. Xia, D. Qin, Y. Yin, Curr. Opin. Colloid Inter. Sci. 2001, 6, 54–64.
20 D. E. Kataoka, S. M. Trolan, Nature 1999,
402, 794–797. 21 L. Kricka, Clin. Chim. Acta 2001, 307, 219–
223. 22 M. Krishnan, V. Namasivayam, R. Lin, R. Pal,
M. A. Burns, Curr. Opin. Biotech. 2001, 12, 92–98. 23 J. Lahiri, L. Isaacs, B. Grzybowski, J. D. Carbeck, G. M. Whitesides, Langmuir 1999, 15, 7186–7198. 24 A. M. Rouhi, Chem. Eng. News 1997, 75, 41– 45. 25 T. P. Sullivan, W. T. S. Huck, Eur. J. Org. Chem. 2003, 17–29. 26 A. Ulman, Chem. Rev. 1996, 96, 1533–1554. 27 J. Israelachvili, Intermolecular and Surface Forces, 2nd Ed., Academic Press, New York, 1992. 28 H. Arwin, Phys. Stat. Sol. (A) 2001, 188, 1331–1338. 29 D. L. Allara, P. Zhang, Mater. Sci. Technol. 1994, 2B, 657–755. 30 G. A. Somorjai, Mater. Res. Soc. Bull. 1998, 23, 11–29. 31 A. G. Frutos, R. M. Corn, Anal. Chem. 1998, 70, 449A–455A 32 R. Jordan, A. Ulman, J. F. Kang, M. H. Rafailovich, J. Sokolov, J. Am. Chem. Soc. 1999, 121, 1016–1022. 33 R. Advincula, Q. Zhou, M. Park, S. Wang, J. Mays, G. Sakellariou, S. Pispas, N. Hadjichristidis, Langmuir 2002, 18, 8672–8684. 34 R. Jordan, A. Ulman, J. Am. Chem. Soc. 1998, 120, 243–247. 35 R. Jordan, N. West, A. Ulman, Y.-M. Chou, O. Nuyken, Macromolecules 2001, 34, 1606– 1611. 36 M. Husemann, D. Mecerreyes, C. J. Hawker, J. L. Hedrick, R. Shah, N. L. Abbott, Angew. Chem. Int. Ed. 1999, 38, 647–649. 37 T. KratzmOller, D. Appelhans, H.-G. Braun, Adv. Mater. 1999, 11, 555–558. 38 M. MXller, F. Nederberg, L. S. Lim, R. KYnge, C. J. Hawker, J. L. Hedrick, Y. Gu, R. Shah, N. L. Abbott, J. Polym. Sci. Part A: Polym. Chem. 2001, 39, 3529–3538. 39 Y. Gu, F. Nederberg, R. KYnge, R. R. Shah, C. J. Hawker, M. MXller, J. L. Hedrick, N. L. Abbott, ChemPhysChem 2002, 448–451.
References 40 M. Weck, J. J. Jackiw, R. R. Rossi,
41 42
43 44 45 46
47 48 49
50 51 52 53
54 55
56 57
58
59
60
P. S. Weiss, R. H. Grubbs, J. Am. Chem. Soc. 1999, 121, 4088–4089. M. Niwa, M. Date, N. Higashi, Macromolecules 1996, 29, 3681–3685. F. Zhang, E. T. Kang, K. G. Neoh, W. Huang, J. Biomater. Sci. Polym. Ed. 2001, 12, 515– 531. J. Hyun, A. Chilkoti, Macromolecules 2001, 34, 5644–5652. L. K. Ista, S. Mendez, V. H. PZrez-Luna, G. P. L[pez, Langmuir 2001, 17, 2552–2555. A. Laschewsky, E. D. Rekai, E. Wischeroff, Macromol. Chem. Phys. 2001, 202, 276–286. A. Laschewsky, O. Ouari, C. Mangeney, L. Jullien, Macromol. Symp. 2001, 164, 323– 340. X. Liu, K. G. Neoh, E. T. Kang, Langmuir 2002, 18, 9041–9047. J.-B. Kim, M. L. Bruening, G. L. Baker, J. Am. Chem. Soc. 2000, 122, 7616–7617. R. R. Shah, D. Merreceyes, M. Husemann, I. Rees, N. L. Abbott, C. J. Hawker, J. L. Hedrick, Macromolecules 2000, 33, 597–605. W. Huang, G. L. Baker, M. L. Bruening, Angew. Chem. Int. Ed. 2001, 40, 1510–1512. S. Choi, R. Langer, Macromolecules 2001, 34, 5361–5363. D. Gopireddy, S. M. Husson, Macromolecules 2002, 35, 4218–4221. D. M. Jones, J. R. Smith, W. T. S. Huck, C. Alexander, Adv. Mater. 2002, 14, 1130– 1134. D. M. Jones, A. A. Brown, W. T. S. Huck, Langmuir 2002, 18, 1265–1269. J.-B. Kim, W. Huang, M. L. Bruening, G. L. Baker, Macromolecules 2002, 35, 5410– 5416. V. L. Osborne, D. M. Jones, W. T. S. Huck, Chem. Commun. 2002, 1838–1839. A. Y. Sankhe, S. M. Husson, S. M. Kilbey, Mater. Res. Soc. Symp. Proc. 2002, 710, 277– 282. S. Balamurugan, S. Mendez, S. S. Balamurugan, M. J. O’Brien, G. P. Lopez, Langmuir 2003, 19, 2545–2549. Y.-R. Kim, H.-J. Paik, C. K. Ober, G. W. Coates, C. A. Batt, Polymer Preprints 2002, 43(1), 706–707. M. D. K. Ingall, S. J. Joray, D. J. Duffy, D. P. Long, P. A. Bianconi, J. Am. Chem. Soc. 2000, 122, 7845–7846.
61 T. J. Bunning, S. H. Chen, L. C. Chien,
T. Kajiyama, N. Koide, S. C. A. Lien (Eds.), Liquid Crystal Materials and Devices, Materials Research Society, Warrendale, PA, Vol. 559, 1999. 62 A. I. Isayev, T. Kyu, S. Z. D. Cheng (Eds.), Liquid Crystalline Polymer Systems: Technological Advances, American Chemical Society, Washington, D.C., Vol. 632, 1996. 63 C. M. Paleos (Ed.), Polymerization in Organized Media, Gordon and Breach, Philadelphia, PA, 1992. 64 G. P. Crawford, S. Zumer (Eds.), Liquid Crystals in Complex Geometries, Taylor & Francis, Bristol, PA, 1996. 65 B. Peng, D. Johannsmann, J. ROhe, Macromolecules 1999, 32, 6759–6766. 66 Y. Barness, O. Gershevitz, M. Sekar, C. N. Sukenik, Langmuir 2000, 16, 247–251. 67 Y. Xia, G. M. Whitesides, Angew. Chem. Int. Ed. 1998, 37, 550–575. 68 N. Fery, R. Laible, K. Hamann, Angew. Makromol. Chem. 1973, 34, 81–109 69 Hamann, R. Laible, J. Horn, Polym. Sci. Technol. 1975, 9A, 93–105 70 M. Koehler, J. Ohngemach, in: Radiation Curing of Polymeric Materials (Eds. C. E. Hoyle, J. F. Kinstle), American Chemical Society, Vol. 417, Washington, D.C., 1990, Chapter 9, pp. 106–124. 71 G. Boven, M. L. C. M. Oosterling, G. Challa, A. J. Schouten, Polymer 1990, 31, 2377–2383. 72 E. Carlier, A. Guyot, A. Revillon, M.-F. Llauro-Darricades, R. Petiaud, React. Polym. 1991, 16, 41–49. 73 E. Carlier, A. Guyot, A. Revillon, React. Polym. 1992, 16, 115–124. 74 N. Tsubokawa, Y. Shirai, K. Hashimoto, Coll. Polym. Sci. 1995, 273, 1049–1054. 75 N. Tsubokawa, Y. Shirai, H. Tsuchida, S. Handa, J. Polym. Sci. Part A: Polym. Chem. 1994, 32, 2327–2332. 76 O. Prucker, J. ROhe, Macromolecules 1998, 31, 592–601. 77 K. Fujiki, M. Sakamoto, Polym. Polym. Comp. 1999, 7, 453–460. 78 G. Tovar, S. Paul, W. Knoll, O. Prucker, J. ROhe, Supramol. Sci. 1995, 2, 89–98. 79 X. Chen, L. M. Tolbert, C. L. Henderson, D. W. Hess, J. ROhe, J. Vac. Sci. Technol. B 2003, 19, 2013–2019. 80 O. Prucker, M. Schimmel, G. Tovar, W. Knoll, J. ROhe, Adv. Mater. 1998, 10, 1073–1077.
149
150
7 Photoinitiated Polymerization from Self-Assembled Monolayers 81 J. Dyer, Adv. Funct. Mater. 2003, 13, 667–670 82 P. J. Wyatt, Anal. Chim. Acta 1993, 272,
1–40. 83 J. A. Bumpus, J. J. Kim, S. R. Coon, J. Chem. Ed. 2000, 77, 1396–1400. 84 R. Crooks, ChemPhysChem 2001, 2, 644–654. 85 N. L. Jeon, I. S. Choi, G. M. Whitesides, N. Y. Kim, P. E. Laibinis, Y. Harada, K. R. Finnie, G. S. Girolami, R. G. Nuzzo, Appl. Phys. Lett. 1999, 75, 4201–4203. 86 O. Prucker, J. Habicht, I.-J. Park, J. ROhe, Polym. Preprints 2003, 44(1), 470–471. 87 R. D. Piner, J. Zhu, F. Xu, S. H. Hong, C. A. Mirkin, Science 1999, 283, 661–663. 88 H.-W. Li, B. V. O. Muir, G. Fichet, W. T. S. Huck, Langmuir 2003, 19, 1963–1965. 89 U. Schmelmer, R. Jordan, W. Geyer, W. Eck, A. GXlzh\user, M. Grunze, A. Ulman, Angew. Chem. Int. Ed. 2003, 42, 559–563. 90 Z. Zhang, W. Sun, P. Cheng, Molecules 2003, 8, 207–222. 91 J.-T. Lue, J. Phys. Chem. Solids 2001, 62, 1599–1612. 92 F. Remacle, R. D. Levine, ChemPhysChem 2001, 2, 20–36. 93 J. Murphy, Anal. Chem. 2002, 74, 520A– 526A. 94 K. Kamata, Y. Lu, Y. Xia, J. Am. Chem. Soc. 2003, 125, 2384–2385. 95 K. Ohno, K. Koh, Y. Tsujii, T. Fakuda, Macromolecules 2002, 35, 8989–8993. 96 J. Raula, J. Shan, M. Nuopponen, A. Niskanen, H. Jiang, E. I. Kauppinen, H. Tenhu, Langmuir 2003, 19, 3499–3505. 97 T. E. Patten, Polym. Preprints 2003, 44(1), 425–426. 98 J. Bai, K.-Y.Qiu, Y. Wei, Polym. Int. 2003, 52, 853–858. 99 G. Moad, D. H. Solomon, The Chemistry of Free Radical Polymerization, Pergamon, Terry Town, New York, 1995. 100 W. Huang, G. Skanth, G. L. Baker, M. L. Bruening, Langmuir 2001, 17, 1731–1736. 101 R. Schmidt, T. Zhao, J.-B. Green, D. J. Dyer, Langmuir 2002, 18, 1281. 102 X. Fan, C. Xia, T. Fulghum, M.-K. Park, J. Locklin, R. C. Advincula, Langmuir 2003, 19, 916–923. 103 J. Zhang, X. Xu, J. Chen, E. Kang, Thin Solid Films 2002, 413, 76–84. 104 J. Zhang, C. Q. Cui, T. B. Lim, E. Kang, Macromol. Chem. Phys. 2000, 201, 1653– 1661.
105 S. P. Vernekar, N. D. Ghatge, P. P. Wadgao-
knar, J. Polym. Sci. Part A: Polym. Chem. 1988, 26, 953–958. 106 F. De Schrijver, G. Smets, J. Polym. Sci. Part A: Polym. Chem. 1966, 4, 2201–2210. 107 J. P. Fouassier, D. Ruhlmann, B. Graff, F. Wieder, Prog. Org. Coatings 1995, 25, 169– 202. 108 Y. Yagci, Macromol. Symp. 2000, 161, 19–35. 109 O. W. Webster, Science 1991, 251(4996), 887– 893. 110 B. Ivan, Macromol. Symp. 1994, 88, 201–215. 111 K. Hatada, T. Kitayama, O. Vogl (Eds.), Macromolecular Design of Polymeric Materials, Marcel Dekker, Inc., New York, 1997. 112 C. J. Hawker, A. W. Bosman, E. Harth, Chem. Rev. 2001, 101, 3661–3688. 113 T. E. Patten, K. Matyjaszewski, Adv. Mater. 1998, 10, 901–915. 114 K. Matyjaszewski (Ed.), Controlled/Living Radical Polymerization: Progress in ATRP, NMP, and RAFT, American Chemical Society, Washington, D.C., Vol. 768, 2000. 115 H. S. Bisht, A. K. Chatterjee, J. Macromol. Sci.: Polym. Rev. 2001, C41, 139–173. 116 A. R. Kannurpatti, S. Lu, G. M. Bunker, C. N. Bowman, Macromolecules 1996, 29, 7310–7315. 117 Y. Nakayama, T. Matsuda, Macromolecules 1996, 29, 8622–8630. 118 H. J. Lee, T. Matsuda, J. Biomed. Mater. Res. 1999, 47, 564–567. 119 B. de Boer, H. K. Simon, M. P. L. Werts, E. W. van der Vegte, G. Hadziioannou, Macromolecules, 2000, 33, 349–356. 120 J. Feng, D. J. Dyer, Polym. Preprint 2003, 44(1), 516–517. 121 G. H\hner, Ch. WXll, M. Buck, M. Grunze, Langmuir 1993, 9, 1955–1958. 122 G. Odian, Principles of Polymerization, 3rd Ed., Wiley, New York, 1991, p. 286. 123 O. Prucker, J. ROhe, Langmuir 1998, 14, 6893–6898. 124 L. S. Penn, H. Huang, M. D. Sindkhedkar, S. E. Rankin, K. Chittenden, R. P. Quirk, R. T. Mathers, Y. Lee, Macromolecules 2002, 35, 7054–7066. 125 R. Paul, R. Schmidt, J. Feng, D. J. Dyer, J. Polym. Sci. Part A: Polym. Chem. 2002, 40, 3284–3291.
151
8
Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes Stephen G. Boyes, Anthony M. Granville, Marina Baum, Bulent Akgun, Brian K. Mirous, and William J. Brittain
Abstract
The synthesis of tethered block copolymer brushes by the use of controlled/“living” free radical polymerization techniques presents many significant advantages over traditional free radical polymerization methods. The authors’ group has found the most versatile controlled/“living” free radical polymerization techniques to be atom transfer radical polymerization (ATRP) and reversible addition fragmentation transfer (RAFT) polymerization. Both diblock and ABA-type triblock copolymer brushes have been synthesized using either ATRP or RAFT. Of particular interest in the case of block copolymer brushes is their ability to reversibly rearrange upon treatment with selective solvents. This rearrangement of block copolymer brushes can result in the formation of unusual surface morphologies that have been attributed to the formation of either “pinned micelles” or “folded” structures. Alternatively, thermal rearrangement has also been demonstrated for diblock copolymer brushes containing a fluorinated block.
8.1
Introduction and Background
Polymer brushes refer to an assembly of polymer chains which are tethered by one end to a surface or interface [1,2]. Tethering of the chains in close proximity to each other forces the chains to stretch away from the surface in order to avoid overlapping. Polymer brushes have recently attracted considerable attention, and numerous studies have been conducted to examine their structure and novel properties [3–9]. Polymer brushes are typically synthesized by two different methods, namely physisorption and covalent attachment. Of these methods, covalent attachment is preferred as it overcomes the disadvantages of physisorption, which include thermal and solvolytic instabilities [10]. Covalent attachment of polymer brushes can be achieved by using either “grafting to” or “grafting from” techniques. The “grafting to” technique involves tethering preformed, end-functionalized polymer chains to a suitable substrate under appropriate conditions [11]. This technique often leads to
152
8 Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes
low grafting density and low film thickness, as the polymer molecules must diffuse through the existing polymer film to reach the reactive sites on the surface. The steric hindrance for surface attachment increases as the tethered polymer film thickness increases. In order to overcome this problem, the “grafting from” approach can be used, and this has generally become the most attractive way to prepare thick, covalently tethered polymer brushes with a high grafting density [10]. The “grafting from” technique involves the immobilization of initiators onto the substrate, followed by insitu surface-initiated polymerization to generate the tethered polymer brush. Surface-immobilized initiators can be generated by either treating the substrate with plasma or glow discharge in the presence of a gas [12], or forming an initiator which contains self-assembled monolayers (SAMs) on the substrates [13,14]. As the chains are growing from the surface, the only limit to propagation is diffusion of monomer to the chain ends, thus resulting in thick tethered polymer brushes with high grafting density. Recent advances in polymer synthesis techniques have underlined the importance of controlled/“living” free radical polymerization, as it provides a number of advantages over traditional free radical methods [15]. One of the main advantages provided by a controlled/“living” free radical system for polymer brush synthesis is that of control over the brush thickness, this being achieved via the control of molecular weight and narrow polydispersities [13,14]. Another advantage of the controlled/“living” free radical system is the ability to produce polymer brushes of specific architectures. The most interesting architectures produced to date are the block copolymer brushes [7–9,16–27], and this is due mainly to vertical phase separation occurring when the block copolymer chains are tethered by one end to a surface or substrate. By changing the grafting density, chain length, relative block length, block composition, or the interaction energy between the blocks and the surrounding environment, the formation of a variety of novel well-ordered structures has been predicted in theoretical terms [3,4], and in some cases this has been demonstrated experimentally [7,8,16]. This chapter presents a brief overview of the authors’ findings in the synthesis of block copolymer brushes, tethered to flat substrates or surfaces, using controlled/ “living” free radical polymerization techniques. The techniques employed include atom transfer radical polymerization (ATRP) and reversible addition fragmentation transfer (RAFT) polymerization, both of which have been used to synthesize diblock and triblock copolymer brushes.
8.2 Controlled/“Living” Free Radical Polymerization
8.2
Controlled/“Living” Free Radical Polymerization 8.2.1
Atom Transfer Radical Polymerization (ATRP)
The basic mechanism of ATRP involves a reversible switching between two oxidation states of a transition metal complex (Scheme 8.1) [28]. The radicals, or the active species, are generated though a reversible redox process which is catalyzed by a transition metal complex (Mtn-Y/Ligand) that undergoes a one-electron oxidation with simultaneous abstraction of a transferable halogen, X, from a dormant species, R-X. Polymer chains grow by the addition of the intermediate radicals to monomers in a manner similar to conventional radical polymerization [15]. The equilibrium represented in Scheme 8.1 is predominantly shifted to the left (dormant) side so as to suppress termination and transfer reactions. Termination does occur, though in a well-controlled system it is limited to a few percent of the polymer chains. A small amount of termination is important as it generates oxidized metal complexes, XMtn+1, as persistent radicals to reduce the stationary concentration of growing radicals and thereby minimize the contribution of termination [29]. A successful ATRP will have a uniform growth of all the chains which is achieved by fast initiation and rapid, reversible deactivation.
Polymer-X
+
kact
Mtn-X/Ligand
+
Polymer kdeact
Mtn+1-X2/Ligand kterm dead polymer
kp Monomer Scheme 8.1
Basic mechanism of atom transfer radical polymerization.
S P
A
+
S
kexAB
S C
S
P
PB
C
A
kexAB
ka kf
P
B
Z
Z Monomer
+
Monomer dA
B k frA
B
rB A
S P
A
k ad
S C
BA
PB
Z Scheme 8.2
Basic mechanism of reversible addition fragmentation transfer polymerization.
153
154
8 Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes
The basic mechanism of RAFT polymerizations involves a reversible addition fragmentation cycle, in which transfer of a dithioester moiety between active and dormant species maintains the controlled character of the polymerization (Scheme 8.2) [30–32]. A RAFT polymerization is usually carried out by the addition of a suitable RAFT agent (dithioester, trithiocarbonates, dithiocarbonates, or dithiocarbamates) to a conventional free radical polymerization mixture. The addition of the RAFT agent typically results in polymers of predetermined chain length and narrow polydispersity. Use of the RAFT process also results in polymer chains terminated by thiocarbonylthio segments which can be chain extended to yield a variety of copolymer structures.
8.3
Synthesis of Block Copolymer Brushes 8.3.1
Diblock Copolymer Brushes
Diblock copolymer brushes tethered to flat silicon substrates have been synthesized using both ATRP and RAFT techniques. The first diblock copolymer brushes synthesized in the authors’ group were made by a combination of carbocationic polymerization and ATRP (Figure 8.1) [25]. Zhao and co-workers [24] synthesized diblock copolymer brushes consisting of a tethered chlorine-terminated polystyrene (PS) block, produced using carbocationic polymerization, on top of which was added a block of either poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA) or poly((N,N¢-dimethylamino)ethyl methacrylate) (PDMAEMA), synthesized using ATRP. The thickness of the outer poly(meth)acrylate block was controlled by adding varying amounts of free initiator to the ATRP media. It has been reported that the addition of free initiator is required to provide a sufficiently high concentration of deactivator, which is necessary for controlled polymerizations from the surface [33]. The properties of some diblock copolymer brushes which have been synthesized are summarized in Table 8.1. The first diblock copolymer brush to be synthesized completely using controlled/ “living” free radical polymerization techniques in our group was by Sedjo and coworkers [23]. In this study, a tethered diblock copolymer of PS and PMMA was synthesized using a combination of reverse atom transfer radical polymerization (RATRP) and standard ATRP techniques (Figure 8.2) [23]. The properties of this diblock copolymer brush are listed in Table 8.1. RATRP involves initiation by conventional radical initiators in the presence of an ATRP deactivator. RATRP has been shown to produce polymers that are end-functionalized with a transferable halogen, thus allowing continued polymerization [34–36]. In order to perform RATRP from the surface, an azo-initiator was first immobilized on the silicon substrate, followed by the polymerization of styrene in the presence of copper(II) bromide and ligand. This resulted in the formation of a tethered block of PS with a terminal bromine group; the latter was subsequently used to initiate MMA under standard ATRP conditions.
8.3 Synthesis of Block Copolymer Brushes Table 8.1 Summary of the properties of diblock copolymer brushes.
Diblock copolymer brush structurea)
Thickness of Thickness of tethered blockb) outer blockb) (nm) (nm)
Polymerization techniquec)
Reference(s)
Si/SiO2//PS-b-PMMA Si/SiO2//PS-b-PMA Si/SiO2//PS-b-PDMAEMA Si/SiO2//PS-b-PMMA Si/SiO2//PS-b-PDMA Si/SiO2//PDMA-b-PMMA Si/SiO2//PS-b-P(t-BA) Si/SiO2//PS-b-PAA Si/SiO2//PMA-b-P(t-BA) Si/SiO2//PMA-b-PAA Si/SiO2//PS-b-PPFS Si/SiO2//PS-b-PHFA Si/SiO2//PMA-b-PPFS Si/SiO2//PMA-b-PHFA
28 24 27 25 11 11 21 21 14 14 16 10 11 15
Cationic/ATRP Cationic ATRP Cationic/ATRP RATRP/ATRP RAFT RAFT ATRP ATRP/Hydrolysis ATRP ATRP/Hydrolysis ATRP ATRP ATRP ATRP
24, 25 25 25 23 19 19 16 16 16 16 38 38 38 38
a)
b) c)
11 9 3 7 12 10 17 8 16 9 5 6 5 5
PS = polystyrene; PMMA = poly(methyl methacrylate); PMA = poly(methyl acrylate); PDMAEMA = poly((N,N-dimethylamino)ethyl methacrylate); PDMA = poly(dimethylacrylamide); P(t-BA) = poly(tert-butyl acrylate); PAA = poly(acrylic acid); PPFS = poly(pentafluorostyrene); PHFA = poly(heptadecafluorodecyl acrylate). Representative structure is Si/SiO2//tethered block-b-outer block. ATRP = atom transfer radical polymerization; RATRP = reverse atom transfer radical polymerization; RAFT = reversible addition fragmentation transfer polymerization.
O O
O
CH3
Si
OCD3 CH3
O
CH3
Styrene O TiCl4, -78 oC, CH2Cl2
Si
CH2 CH n Cl CH3
O
DtBP, 50 min
Methyl Methacrylate
O O
CH3
CH3
Si O
PMDETA CuBr
CH2 CH n
CH2
CH m
CH3
O OCH3
Figure 8.1 Synthesis of surface-immobilized diblock copolymer brush (Si/SiO2//PS-b-PMMA) using a combination of carbocationic polymerization and atom transfer radical polymerization (ATRP) [25].
Br
155
156
8 Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes
To make further use of the azo-initiator, tethered diblock copolymers were prepared using RAFT polymerization. Baum and Brittain [19] were able to prepare diblock copolymer brushes of PS, PMMA and poly(dimethylacrylamide) (PDMA) from a surface immobilized azo-initiator in the presence of 2-phenylprop-2-yl dithiobenzoate as a chain transfer agent (Figure 8.3). The properties of the diblock copolymer brushes produced are listed in Table 8.1. The addition of “free” initiator, 2,2¢azobisisobutyronitrile (AIBN), was required in order to obtain a controlled polymerization, and this resulted in the formation of “free” polymer chains in solution. As the immobilized azo-initiator contains a cleavable ester group, Baum and Brittain [19] were able to compare the molecular weight of free polymer chains with that of the tethered polymer chains, by cleaving a homopolymer brush prepared on high surface area, nonporous silica prepared in the presence of “free” initiator. These results indicated that for homopolymer brushes of either PS or PMMA, both the number average molecular weight (Mn) and polydispersity (PDI) were comparable for Ofree’ polymer versus cleaved polymer [19].
O O
Si
CN (CH2)11 OCO(CH2)2
CN N
CH3
N
CH3
O
CH3 S
H3C Styrene
S CH3 CTA
O O
Si
CN (CH2)11 OCO(CH2)2
O
Dimethyl Acrylamide
O O
Si O
CH2
CH
Br
n
CH3
AIBN, CTA
CN (CH2)11 OCO(CH2)2
CH3 CH2
CH
n
CH2
CH3
CH m Br O N
H3C
Figure 8.2 Synthesis of surface-immobilized diblock copolymer brush (Si/SiO2//PS-b-PMMA) using reverse atom transfer radical polymerization [23].
CH3
8.3 Synthesis of Block Copolymer Brushes
In order to produce block copolymer brushes by ATRP directly from the surface, the ATRP initiator, (11-(2-bromo-2-methyl)propionyloxy)undecyltrichlorosilane, was prepared and immobilized on silicon substrates. From this immobilized bromo-isobutyrate-type ATRP initiator both Boyes et al. [37] and Granville et al. [38] were able to synthesize diblock copolymer brushes using ATRP. Boyes et al. [37] synthesized diblock copolymer brushes of either PS or PMA and poly(tert-butyl acrylate) (P(tBA)) using ATRP, with subsequent hydrolysis of the P(t-BA) to poly(acrylic acid) (PAA) (Figure 8.4). The properties of these diblock copolymer brushes are listed in Table 8.1. The diblock copolymer brushes, Si/SiO2//PS-b-PAA and Si/SiO2//PMA-bPAA, were both treated with aqueous silver acetate to produce polyelectrolyte diblock copolymer brushes. The polyelectrolyte brushes were subsequently reduced using H2 resulting in the formation of silver nanoparticles within the diblock copolymer brush [37]. Granville and colleagues [38] used similar ATRP techniques to synthesize diblock copolymer brushes that contained the fluorinated monomers pentafluorostyrene (PFS) and heptadecafluorodecyl acrylate (HFA). The properties of these diblock copolymer brushes are also listed in Table 8.1. The use of fluorinated monomers to
O O
Si
CN (CH2)11 OCO(CH2)2
CN N
CH3
N
CH3
O
CH3 S
H3C Styrene
S CH3 CTA
O O
Si
CN (CH2)11 OCO(CH2)2
O
Dimethyl Acrylamide
O O
Si O
CH2
CH
Br
n
CH3
AIBN, CTA
CN (CH2)11 OCO(CH2)2
CH3 CH2
CH
n
CH2
CH3
CH m Br O N
H3C
Figure 8.3 Synthesis of surface-immobilized diblock copolymer brush (Si/SiO2//PS-b-PDMA) using reverse addition fragmentation transfer polymerization [19].
CH3
157
158
8 Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes
O O
Si
O
O
CH3
(CH2)11 O CH3
O
O Anisole, CuBr, PMDETA 90 oC, 24 h
O Si
O
CH3
(CH2) 11 O
CH2
CH n Br
CH3
Acetone, CuBr, PMDETA, 60 oC, 6 h
CH3
(CH2)11 O
CH2
CH n
CH2
CH3
O
Si O
t-Butyl Acrylate
O
O
Styrene
Br
CH m Br O OC(CH3)3
10% aq. HCl, Reflux, 12 h
O O
Si
O
CH3
(CH2) 11 O
CH2
CH n
CH2
CH3
O
CH m Br O OH
10 mM Ag(ac.)aq. 40 oC, 24 h O O
Si
O
CH3
(CH2)11 O
O
CH2
CH
n
CH2
CH3
CH m Br O + O - Ag
Figure 8.4 Synthesis of surface-immobilized polyelectrolyte diblock copolymer brush (Si/SiO2//PS-b-PAA(Ag+)) using atom transfer radical polymerization [37].
produce outer blocks of either poly(pentafluorostyrene) (PPFS) or poly(heptadecafluorodecyl acrylate) (PHFA) resulted in surfaces that were highly hydrophobic [38]. 8.3.2
Triblock Copolymer Brushes
In general, very few reports have been made relating to the synthesis of tethered triblock copolymer brushes [16,27]. The authors’ group has used surface-immobilized ATRP techniques to produce tethered triblock copolymer brushes, while Boyes et al. [16] synthesized ABA-type triblock copolymer brushes of PS and PMA via sequential monomer addition to a self-assembled monolayer (SAM) of a bromo-isobutyrate ATRP initiator (Figure 8.5). The properties of the Si/SiO2//PS-b-PMA-b-PS and Si/ SiO2//PMA-b-PS-b-PMA brushes are listed in Table 8.2; these data indicate that, for the Si/SiO2//PS-b-PMA-b-PS brush, there appears to be incomplete reinitiation in the formation of the third block, as although a PS thickness of approximately 20 nm was targeted, a thickness of only 3 nm was obtained. The incomplete reinitiation was attributed to radical-radical termination occurring in the formation of the previous blocks, resulting in tethered chains that were unable to reinitiate [16]. In the
8.3 Synthesis of Block Copolymer Brushes
case of the Si/SiO2//PMA-b-PS-b-PMA brush, the outer PMA block had a thickness of 15 nm, which is close to the target thickness of 20 nm, indicating that the degree of termination occurring in this system was less.
O O
Si
O
O
CH3
(CH2)11 O
Br
O Anisole, CuBr, PMDETA 90 oC, 24 h
CH3
O
O Si
O
O O
Si
O
CH2
CH n
CH2
CH n Br
CH m Br O OCH3
Anisole, CuBr, PMDETA 90 oC, 24 h
CH3
(CH2) 11 O
CH2
CH
n
CH2
CH3
O
CH2 CH3
Anisole, CuBr, PMDETA, 90 oC, 24 h
CH3
Styrene
CH3
(CH2) 11 O
CH3
(CH2)11 O
O
Si O
Methyl Acrylate
O
O
Styrene
CH m O
CH2
CH p Br
OCH3
Figure 8.5 Synthesis of surface-immobilized ABA type triblock copolymer brush (Si/SiO2//PS-b-PMA-b-PS) using atom transfer radical polymerization [16].
Table 8.2
Summary of the properties of tethered ABA-type triblock copolymer brushesa).
Layer
Water contact angleb) ha hr
Thicknessc) (nm)
Molecular weight (Mn) Expt.e) Calcd.d)
PS PS-b-PMA PS-b-PMA-b-PS PMA PMA-b-PS PMA-b-PS-b-PMA
97 73 88 72 87 73
20 18 3 20 23 15
13.2 P 17.9 P 21.7 P 15.2 P 21.8 P 18.4 P
a) b) c) d) e)
87 63 70 59 72 58
From Ref. [16]. The standard deviation of contact angles was <2R. Thickness determined by ellipsometry. Calculated using the conversion determined from the free polymer. Experimental molecular weight of the free polymer.
103 103 103 103 103 103
10.5 P 17.2 P 18.6 P 13.6 P 18.7 P 15.5 P
103 103 103 103 103 103
PDI
1.10 1.23 1.07 1.50 1.08 1.23
159
160
8 Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes
8.4
Rearrangement of Block Copolymer Brushes
The behavior of tethered block copolymer brushes is potentially very interesting due to the fact that the polymer chains are covalently bonded to the surface and are vertically micro-phase separated due to the immiscibility of the different blocks. Theoretical work using self-consistent field calculations, computer simulations and scaling arguments have demonstrated that the behavior of tethered diblock copolymer brushes is complex and can depend on a variety of factors [3,4]. Balazs and co-workers [3] have demonstrated that changes in chain architecture, grafting density, composition, overall molecular weight and the interaction energies between blocks and also between blocks and solvent can result in a variety of novel structures. One of the most interesting structures is the Opinned micelle’ structure, which can be formed when tethered AB diblock copolymer brushes are treated with a solvent which is a poor solvent for the outer B block but a good solvent for the tethered A block [3]. 8.4.1
Rearrangement of Diblock Copolymer Brushes
Experimentally, very few investigations have been conducted into the rearrangement of tethered diblock copolymer brushes. The first report of nanopattern formation from a tethered diblock copolymer brush was by Zhao and co-workers [7,8]. Using the combination of carbocationic and ATRP techniques described above (see Figure 8.1), Zhao et al. [24] produced a tethered Si/SiO2//PS-b-PMMA brush where the PS thickness was 23 nm and the PMMA thickness was 14 nm. When this diblock copolymer brush was treated with dichloromethane (which is a good solvent for both PS and PMMA), water contact results indicated a characteristic advancing contact angle of PMMA, 74R, while atomic force microscopy (AFM) analysis indicated that the surface of the brush was smooth (Figure 8.6(a)) [8]. When the same sample is treated with mixed solvents of dichloromethane and cyclohexane, and the percentage of cyclohexane is gradually increased, the advancing water contact of the brush increased to 120R, and the tethered diblock brush was seen to reorganize, resulting in the formation of a regular nanopattern on the surface (Figure 8.6(b)) [8]. Zhao and colleagues speculated that, with an increasing cyclohexane content, the PMMA blocks would collapse and aggregate to form a core, so as to avoid contact with the cyclohexane (Figure 8.7) [7]. Baum and Brittain [19] also attempted to rearrange their diblock copolymers made using RAFT polymerizations (see Figure 8.3 and Table 8.1). Upon treatment with methylcyclohexane (a good solvent for PS and a non-solvent for PDMA) at 35 RC, the advancing water contact angle of the Si/SiO2//PS-b-PDMA brush increased from 42R to 65R. It appears as though there was incomplete rearrangement of the brush after treatment with methylcyclohexane, as the advancing contact angle did not reach the characteristic contact angle of PS (approx. 100R). Treatment of the same sample with tetrahydrofuran (THF)/water (1/1, v/v) at 35 RC reversed the con-
8.4 Rearrangement of Block Copolymer Brushes
(a)
(b) Figure 8.6 Atomic force microscopy (AFM) images of tethered Si/SiO2//PS-b-PMMA brush after: (a) treatment with dichloromethane; and (b) gradual treatment with cyclohexane [8].
Figure 8.7 Speculative model for nanopattern formation from tethered Si/SiO2//PS-b-PMMA brush [7].
161
162
8 Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes Table 8.3
Solvent rearrangement of diblock copolymer brushes containing PPFSa)
Solventb)
Si/SiO2//PS-b-PPFS hr ha
Si/SiO2//PMA-b-PPFS hr ha
1st Fluorobenzene 1st Cyclohexane/acetone 2nd Fluorobenzene 2nd Cyclohexane/acetone
121 101 119 102
115 79 118 82
a) b)
90 85 88 87
88 67 92 68
From Ref. [38,39]. Sample immersed in solvent at 60 RC for 1 h.
tact angle back to the original value. Similar results were seen for the Si/SiO2// PDMA-b-PMMA brush. In this case, the advancing water contact angle decreased from 66R to 58R after the sample was treated with THF/H2O (1/1, v/v) at 35R and returned to the original contact angle value after treatment with dichloromethane. Again, it appears as though this sample has incomplete rearrangement, as the contact angles achieved after solvent treatment do not match the characteristic contact angles of either PDMA (~40R) or PMMA (~74R). No AFM images were taken of these samples. Granville and colleagues [39] investigated the potential to rearrange diblock copolymer brushes consisting of a tethered hydrocarbon block and an outer fluorocarbon block, by using both solvent and thermal treatments. The diblock copolymer brushes with PPFS as the outer block and either PS or PMA as the tethered block were found to undergo near-complete rearrangement upon treatment with a selective solvent for the tethered block (Table 8.3). By contrast, the diblock copolymer brushes with PHFA as the outer block and either PS or PMA as the tethered block did not completely rearrange upon treatment with a selective solvent for the tethered block (Table 8.4). The incomplete rearrangement of the diblock copolymer brushes containing PHFA was attributed to the large interaction parameter between blocks as a result of the long fluorocarbon chain on the HFA monomer. As an alternative switching mechanism, Granville et al. [38] used thermal treatment of samples that had been rearranged using solvent, to reorganize the surface composition (Figure 8.8). Thermal treatment of the solvent-rearranged Si/SiO2//PS-b-PPFS brush at 100 RC for 20 min, after it had been treated with cyclohexane at 35 RC, resulted in an Table 8.4
Solvent rearrangement of diblock copolymer brushes containing PHFAa)
Solventb)
Si/SiO2//PS-b-PPFS hr ha
Si/SiO2//PMA-b-PPFS hr ha
1st Trifluorotoluene 1st Cyclohexane/ethyl acetate 2nd Trifluorotoluene 2nd Cyclohexane/ethyl acetate
127 110 125 111
126 110 125 109
a) b)
From Ref. [38]. Sample immersed in solvent at 60 RC for 1 h.
98 92 97 92
100 90 100 91
8.4 Rearrangement of Block Copolymer Brushes
Figure 8.8
Thermal rearrangement of fluorinated diblock copolymer brushes [38].
increase in the advancing contact angle from 101R to 121R. Similar results were seen for the Si/SiO2//PMA-b-PPFS brush, although thermal treatment at 60 RC for 5 min was all that was required to increase the advancing contact angle from 80R to 118R. The only report on the rearrangement of triblock copolymer brushes has been by Boyes and colleagues [16], who were able to rearrange their ABA-type triblock copolymer brushes by solvent treatment. Each of the triblock copolymer brushes (see Table 8.2) was treated with a solvent which was effective for the middle block but was a nonsolvent for the tethered and outer blocks. After treatment of the Si/SiO2// PMA-b-PS-b-PMA brush with cyclohexane, the advancing water contact angle increased from 74R to 94R, which is close to the characteristic contact angle for PS
(a)
(b)
Figure 8.9 Atomic force microscopy (AFM) images of tethered Si/SiO2//PMAb-PS-b-PMA brush after: (a) treatment with dichloromethane; and (b) gradual treatment with cyclohexane [16].
163
164
8 Recent Advances in the Synthesis and Rearrangement of Block Copolymer Brushes
and AFM analysis, thereby demonstrating that the surface went from smooth (Figure 8.9(a)) to an unusual nanomorphology with greater roughness (Figure 8.9(b)). Similar results were seen for the Si/SiO2//PS-b-PMA-b-PS brush after treatment with acetone; however, in this case the advancing water contact angle increased from 70R to 92R. The formation of this unusual nanomorphology was speculated to be a “folded” brush structure, where the two end blocks aggregate and force the mid-block to the air interface (Figure 8.10) [16].
Cyclohexane or Acetone
CH2Cl2
Proposed response of tethered triblock copolymer brushes to different solvents [16].
Figure 8.10
Summary
The use of controlled/“living” free radical polymerization techniques to synthesize tethered block copolymer brushes offers many advantages over traditional radical polymerization methods. The results of the present studies have shown RAFT and ATRP to be the most versatile polymerization methods to produce block copolymer brushes. Using these techniques, a series of both diblock and ABA-type triblock copolymer brushes has been synthesized. Most of these systems display reversible rearrangement of block segments upon treatment with selective solvents. Diblock copolymer brushes containing fluorinated blocks demonstrate an ability to rearrange by thermal treatment after the surface has been treated with solvent. In some of the
References
rearranged systems, unusual nanomorphologies were observed that were attributed to the formation of either “pinned micelles” or “folded” structures.
References 1 S. T. Milner, Science 1991, 251, 905. 2 A. Halpern, M. Tirrell, T. P. Lodge, Adv.
Polym. Sci. 1992, 100, 31. 3 E. B. Zhulina, C. Singh, A. C. Balazs, Macromolecules 1996, 29, 6338. 4 E. B. Zhulina, C. Singh, A. C. Balazs, Macromolecules 1996, 29, 8254. 5 Y. Ito, S. Nishi, Y. S. Park, Y. Imanishi, Macromolecules 1997, 30, 5856. 6 Y. S. Park, Y. Ito, Y. Imanishi, Macromolecules 1998, 31, 2606. 7 B. Zhao, W. J. Brittain, W. Zhou, S. Z. D. Cheng, Macromolecules 2000, 33, 8821. 8 B. Zhao, W. J. Brittain, W. Zhou, S. Z. D. Cheng, J. Am. Chem. Soc. 2000, 122, 2407. 9 X. Kong, T. Kawai, J. Abe, T. Iyoda, Macromolecules 2001, 34, 1837. 10 B. Zhao, W. J. Brittain, Prog. Polym. Sci. 2000, 25, 677. 11 P. Mansky, Y. Liu, E. Huang, T. P. Russell, C. J. Hawker, Science 1997, 275, 1458. 12 Y. Ito, Y. Ochiai, Y. S. Park, Y. Imanishi, J. Am. Chem. Soc. 1997, 119, 1619. 13 O. Prucker, J. RUhe, Macromolecules 1998, 31, 592. 14 O. Prucker, J. RUhe, Macromolecules 1998, 31, 602. 15 K. Matyjaszewski, in: Controlled/Living Radical Polymerization (Ed.: K. Matyjaszewski), ACS Symposium Series 768, American Chemical Society; Washington DC, USA, 2000, p. 2. 16 S. G. Boyes, W. J. Brittain, X. Weng, S. Z. D. Cheng, Macromolecules 2002, 35, 4960. 17 K. Matyjaszewski, P. J. Miller, N. Shukla, B. Immaraporn, A. Gelman, B. B. Luokala, T. M. Siclovan, G. Lickelbick, T. Vallant, H. Hoffmann, T. Pakula, Macromolecules 1999, 32, 8716. 18 M. Ejaz, S. Yamamoto, K. Ohno, Y. Tsujii, T. Fukuda, Macromolecules 1998, 31, 5934. 19 M. Baum, W. J. Brittain, Macromolecules 2002, 35, 610. 20 D. M. Jones, W. T. S. Huck, Adv. Mater. 2001, 13, 1256.
21 V. L. Osborne, D. M. Jones, W. T. S. Huck,
Chem. Commun. 2002, 1838. 22 M. R. Tomlinson, J. Genzer, Chem. Commun.
2003, 1350. 23 R. A. Sedjo, B. K. Mirous, W. J. Brittain, Mac-
romolecules 2000, 33, 1492. 24 B. Zhao, W. J. Brittain, Macromolecules 2000,
33, 8813. 25 B. Zhao, W. J. Brittain, J. Am. Chem. Soc.
1999, 121, 3557. 26 D. M. Jones, A. A. Brown, W. T. S. Huck,
Langmuir 2002, 18, 1265. 27 J.-B. Kim, W. Huang, M. L. Bruening,
G. L. Baker, Macromolecules 2002, 35, 5410. 28 K. Matyjaszewski, J. Xia, Chem. Rev. 2001,
101, 2921. 29 H. Fischer, Chem. Rev. 2001, 101, 3581. 30 B. Y. K. Chong, T. P. T. Le, G. Moad, E. Riz-
31 32
33
34
35 36 37 38
39
zardo, S. H. Thang, Macromolecules 1999, 32, 2071. D. G. Hawthorne, G. Moad, E. Rizzardo, S. H. Thang, Macromolecules 1999, 32, 5457. R. T. A. Mayadunne, E. Rizzardo, J. Chiefari, Y. Kwong Chong, G. Moad, S. H. Thang, Macromolecules 1999, 32, 6977. M. Husseman, E. E. Malmstrom, M. McNamara, M. Mate, O. Mecerreyes, D. G. Benoit, J. L. Hedrick, P. Mansky, E. Huang, T. P. Russell, C. J. Hawker, Macromolecules 1999, 32, 1424. G. Moineau, P. Dubois, R. Jerome, T. Senninger, P. Teyssie, Macromolecules 1998, 31, 545. J.-S. Wang, K. Matyjaszewski, Macromolecules 1995, 28, 7572. J. Xia, K. Matyjaszewski, Macromolecules 1997, 30, 7692. S. G. Boyes, B. Akgun, W. J. Brittain, M. D. Foster, Macromolecules 2003, 36, 9539. A. M. Granville, S. G. Boyes, B. Akgun, W. J. Brittain, M. D. Foster, Macromolecules 2004, 37, 2790. A. M. Granville, S. G. Boyes, B. Akgun, M. D. Foster, W. J. Brittain, submitted to Adv. Func. Mater.
165
167
9
Surface-Grafted Hyperbranched Polymers Hideharu Mori and Axel H. E. Mller
Abstract
Surface-grafted hyperbranched polymers are a type of polymer brush, which have characteristic branched architectures and unique properties. Recent advances in this field are summarized in terms of the preparation methods, which can be divided into three categories, namely “grafting to”, “grafting from”, and multi-step grafting approaches. The growth of three-dimensional nanostructures (dendrimers and hyperbranched layers) on surfaces has been used to obtain various types of layered materials on planar or curved surfaces. This chapter focuses on surface-initiated, self-condensing vinyl (co)polymerization, which is a primary example of a one-step “grafting from” approach and an effective method for the synthesis of hyperbranched polymers linked covalently to a surface. Molecular parameters of the surface-grafted hyperbranched polymers obtained by self-condensing vinyl (co)polymerization are discussed from a theoretical point of view.
9.1
Introduction
Highly branched polymers are of considerable scientific and industrial interest, due to their low intrinsic viscosity, high solubility and miscibility, and their potential as polyfunctional carriers. The interest in hyperbranched polymers arises from the fact that they combine some features of dendrimers – for example, an increasing number of end groups and a compact structure in solution – with the ease of preparation of linear polymers by means of a one-pot reaction. However, the polydispersities are usually high and their structures are less regular than those of dendrimers, which are monodisperse molecules with well-defined, perfectly branched architectures. Dendrimers have a highly compact and globular shape, and are produced in a multi-step organic synthesis. During the past decade, the field of arborescent polymers (dendrimers, hyperbranched, and highly branched polymers) has become well established, with a large variety of synthetic approaches, fundamental studies on the structure and properties of these unique materials, and the identification of possible applications for these materials [1–4].
168
9 Surface-Grafted Hyperbranched Polymers
Surface grafting of polymer chains has been investigated as an effective and versatile method for the manipulation and control of surface properties. In recent years, much attention has been paid to the use of controlled/“living” polymerizations from planar and spherical surfaces [5,6], because this allows better control over the molecular weights and molecular weight distribution of the target polymer. By using these techniques, a high grafting density and a controlled film thickness can be obtained, as such brushes consist of end-grafted, strictly linear chains of the same length and the chains are forced to stretch away from the flat surface. Many research groups have recently reported the application of controlled/living polymerization systems for the synthesis of a variety polymer brushes on two-dimensional (2D) and threedimensional (3D) substrates. For recent representations of progress in this field, the reader is referred to other chapters of this book. These techniques have also been successfully applied for the preparation of the linear polymers grafted on a linear polymer chain with high density, resulting in cylindrical polymer brushes [7–11]. The surface chemistry and interfacial properties of hyperbranched polymers have also become a field of growing interest [2,12]. In recent years, much interest has been paid to highly branched polymers grafted chemically onto surfaces, as their distinctive chemical and physical properties can be used advantageously as functional surfaces and as interfacial materials. Such surface-grafted hyperbranched polymers can be regarded as a type of polymer brush, as they refer to an assembly of polymer chains which are tethered by one end to a surface or an interface. The typical structures of hyperbranched, branched, and linear polymers grafted onto surfaces are summarized in Figure 9.1. Depending upon the substrates, they can be divided into 3D, 2D, and one-dimensional (1D) hybrids, which correspond to products grafted onto spherical particles, planar surfaces, and linear polymers, respec-
3D
2D
1D
high
branched
low
Figure 9.1 Surface-grafted hyperbranched, highly branched, and linear polymers: from one-dimensional (1D) to three-dimensional (3D).
9.1 Introduction (a) “Grafting to” approach
grafting to
Y X
X
X
X
(reaction of X with Y)
X
X
X
X
X
I
I
I
I
(b) “Grafting from” approach IM IM I
I
grafting from
IM
IM I
I
Surface-initiated polymerization
I
(c) Multi-step grafting approach Y
Y
Y
grafting to
modifications
X X X
Y X
X
X
X
X
M M
X
X
X
X
X
X
modifications
grafting from
M
X
X
I I I
I I
M
X X X
I I
I
I
I
I
I
I
I
I
I
I
I
I
Scheme 9.1 Synthesis of surface-grafted hyperbranched polymer by: (a) “grafting to”; (b) “grafting from”; and (c) multi-step grafting approaches.
tively. The growth of 3D nanostructures (dendrimers and hyperbranched layers) onto and/or from surfaces has been used to obtain various types of layered materials on planar or curved surfaces. There are basically three routes for preparing 2D and 3D hybrids with surfacegrafted hyperbranched polymers: (1) “grafting to”; (2) “grafting from”; and (3) multistep grafting methods (Scheme 9.1). The concept of “grafting to” and “grafting from” in the synthesis of surface-grafted hyperbranched polymers is basically the same as that for conventional linear polymer brushes. The one-step “grafting to” approach involves a reaction (or interaction) of one or several reactive groups of hyper-
169
170
9 Surface-Grafted Hyperbranched Polymers
branched polymers with functional groups on the substrate. In contrast, the “grafting from” technique is performed by an in-situ surface-initiated polymerization from immobilized initiators. For the preparation of surface-grafted hyperbranched polymers, the branched structures should be formed during the polymerization process, and therefore small multifunctional molecules, which can afford branching points, are required. The multi-step grafting method involves a series of repeated “grafting to” or “grafting from” steps. In this case, the branched architecture is formed during the repeated reactions. The scope of this chapter will cover the surface-grafted hyperbranched polymers that have been prepared using the techniques.
9.2
“Grafting To” Approach
Similar to the synthesis of linear polymer brushes by using the “grafting to” technique, surface-grafted hyperbranched polymers can be prepared by the adsorption of hyperbranched polymers onto surfaces, or by the reaction of one or several group of hyperbranched polymers with functional groups on a substrate. Only the latter case can provide hyperbranched polymers linked covalently to a surface. The “grafting to” technique has been mainly employed for the synthesis of dendrimers that are chemically attached to surfaces (2D and 3D). Several research groups have also focused on investigating the physical properties of dendrimers [12–15] and hyperbranched polymers [2,16,17] adsorbed onto solid surfaces. In general, these systems are limited to monolayers, as further grafting is hindered by the polymer chains already adsorbed onto the surface. Dendrimers grafted on a linear polymer chain (1D hybrid) have been also synthesized using the “grafting to” technique, in which attachment of prefabricated dendron building blocks onto a reactive polymer chain is achieved by a polymer-analogous reaction [18,19]. However, the problem in using this approach is the limited conversion, leading to incomplete coverage of the backbone anchor groups with dendrons. This drawback is more significant if a higher generation of dendrons are employed [18,20]. In order to avoid the problem, the so-called macromonomer route (“grafting through”) has been used preferably, in which monomers already carrying dendrons are subjected either to polymerization or to polycondensation [7,19,21]. 9.2.1
Synthesis of 2D Hybrids by “Grafting To”
The synthesis of dendrimers grafted onto surfaces has been mainly conducted using the “grafting to” technique [12–14,22,23]. Due to the highly compact and globular shape, as well as the monodispersity, dendrimers attached to flat surfaces are useful for many applications, such as data storage or nanolithography systems [12]. Similar to conventional self-assembled monolayers of small organic molecules on a planar surface, there are generally two systems that have undergone extensive study: (1) al-
9.2 “Grafting To” Approach
kanethiols on gold; and (2) alkylsiloxanes on hydroxylated silicon surfaces. For example, Gorman and co-workers [24] have investigated self-assembled monolayers of dendrimers, functionalized at the focal point of poly(ether) dendrons with a thiol group, on gold. On the other hand, FrHchet et al. [25] designed modified poly(benzyl ether) dendrimers covalently tethered to a silicon substrate that could serve as passivation resists in scanning probe lithography. For that purpose, they prepared the dendrimers functionalized at the focal point with a covalent tether, consisting of a long alkyl chain derivatized with a terminal chlorosilane coupling agent. The poly(benzyl ether) dendrons containing a tethered carboxylic acid moiety at their focal point have been used as a monolayer of dendrons which could be assembled onto an aminated silicon wafer surface prepared by pre-treatment of the clean silicon surface with (3-aminopropyl)triethoxysilane [22]. Similarly, Wells and Crooks [26] have reported the preparation of dendrimer selfassembled monolayers by using amine-terminated poly(amidoamine) dendrimers with gold modified with a mercaptoundecanoic acid. This was accomplished by forming amide bonds between the peripheral amino-groups of the dendrimer and the carboxylic acid groups on a gold surface. The chemical and physical properties of amine-terminated [13,27] and thiol-terminated [28,29] poly(amidoamine) dendrimers attached to gold surfaces have been thoroughly examined by Crooks and coworkers. One interesting example of applications involving dendrimers grafted onto a flat surface includes the use of biomolecule-functionalized dendrimer monolayers for the development of affinity biosensors. For example, Niemeyer et al. [30,31] have recently demonstrated a novel method for the surface immobilization of DNA using prefabricated poly(amidoamine) starburst dendrimers as mediator moieties. Dendrimers containing 64 primary amino groups in their outer sphere were covalently attached to silylated glass supports and, subsequently the dendritic macromolecules were modified with glutaric anhydride and activated with N-hydroxysuccinimide. These authors claimed that the resulting surfaces revealed both a very high immobilization efficiency for amino-modified DNA-oligomers, and also a remarkably high stability during repeated regeneration and re-using cycles. 9.2.2
Synthesis of 3D Hybrids by “Grafting To”
The “grafting to” technique has been also employed for the synthesis of 3D hybrid systems. For example, Guo and Yu [32] recently reported the synthesis of FrHchettype polyether dendrons bearing COOH groups at the focal points, which were then grafted onto silica nanoparticles premodified with 3-aminopropyltriethoxysilane by using N,N-dicyclohexylcarbodiimide-mediated amidation. The immobilization of novel amino acid (l-glutamic acid derivatives)-based chiral dendrimers with peptide linkages was accomplished using the “grafting to” method involving the carboxylderivatized dendrimers with an aminopropyl-modified silica [33]. These authors demonstrated that the immobilized chiral dendrimers constitute a new class of chiral stationary phases for use in HPLC. The dendritic branches composed of enantio-
171
172
9 Surface-Grafted Hyperbranched Polymers
merically pure l-lysine building blocks have been immobilized on aminopropylmodified silicas [34]. The reaction was achieved using standard peptide coupling methodology between NH2 groups on the silica surface and the COOH group at the focal point of the dendric branch.
9.3
Multi-Step Grafting Approach
The second method is a repeated combination of “grafting to” and “grafting from“ approaches. The first step is a formation of the linear polymer brushes by a polymerization (“grafting from”) or a reaction (“grafting to”). Modification steps provide new sites on the resulting surface-grafted polymer chains, at which point the next series of the polymerization or the reaction can take place. Repetition of these steps can produce surface-grafted hyperbranched polymers. This multi-step grafting approach can be divided into two categories; “grafting to-grafts” and “grafting from-grafts”. To date, only a few systems have been reported for the preparation of surfacegrafted hyperbranched polymers. In these cases, the branched architecture is formed during the repeated reactions, and the film thickness and grafting density increase with increasing the number of repeats (or generation), whereas the degree of branching is independent of the number of repeated cycles. Theses approaches are useful for the preparation of surface-grafted hyperbranched polymers, particularly when a higher grafting density or tightly packed multilayer is required. However, they have the inherent disadvantage that many tedious synthetic steps are necessary to reach the defined surface structures. 9.3.1
“Grafting To-Grafts”
This approach involves a series of repeated “grafting to” steps. Zhou et al. [35] reported the preparation of a highly branched poly(acrylic acid) film attached to a self-assembled monolayer of mercaptoundecanoic acid on gold using this method. The synthetic procedure involves: (1) activation of the carboxylic acid groups in the monolayer via a mixed anhydride; (2) reaction with a,x-diamino-terminated poly(tert-butyl acrylate) to give a grafted polymer layer; and (3) hydrolysis of the tert-butyl esters to yield a poly(acrylic acid) graft. Repetition of these steps produced additional grafting at multiple sites on each prior graft, leading to hyperbranched polymer films. The advantage of the system is that each new layer contains more polymer branches than the previous one, and thus is more tightly packed. These authors showed that the hyperbranched polymers can be covalently modified with a broad range of functional groups, such as fluorophores, electroactive groups, perfluorinated moieties, dyes, and even with other polymers [36–39]. The surface-confined hyperbranched polymers are suitable for a number of technical applications, including corrosion inhibition, chemical sensing, cellular engineering, and micrometerscale patterning [37,40–43]. The same strategy has been employed for the synthesis
9.4 “Grafting From” Approach
of hyperbranched poly(acrylic acid)s grafted on polyethylene [44,45], polypropylene [46], and porous alumina supports [47]. Another example is the preparation of hyperbranched dendritic poly(amidoamine) using the divergent approach from terminal amino groups grafted onto an ultrafine SiO2 surface [48,49]. The preparation was achieved by repeating two processes: (1) Michael addition of methyl acrylate to surface-bound amino groups; and (2) amidation of the resulting esters with ethylenediamine or hexamethylenediamine. The repeating process can be regarded as a “grafting to-grafts” approach. Because the procedure is also similar to divergent approach for dendrimer synthesis, it can be rather expressed as “grafting from”/divergent synthesis. These authors claimed that both the amount of amino groups and the percentage of the grafted poly(amidoamine) increase with an increase in the number of generations. The poly(amidoamine) grafted on the surface is a hyperbranched polymer rather than a precise dendrimer. A similar methodology has been used to prepare dendric poly(amidoamine) grafted on carbon black containing amino groups on the surface [50]. 9.3.2
“Grafting From-Grafts”
The “grafting from-grafts” method relies on the combination of surface-initiated polymerization from immobilized sites and subsequent modifications of the resulting polymer chain to provide new sites where the next series of the polymerization can be started. Matsuda and colleagues [51,52] have reported the synthesis of surfacegrafted hyperbranched polymers by using iniferter (initiator-transfer agent-terminator)-based “living” radical graft copolymerization via photolysis of the benzyl N,Ndiethyldithiocarbamate group. The principle is based on a sequential reaction of iniferter copolymerization with chloromethylstyrene, and subsequent dithiocarbamylation of the chloromethylstyrene units in the copolymers. A variety of vinyl monomers could be used as a functional comonomer, including N,N-dimethylacrylamide, N,N-dimethylaminoethyl methacrylate, and sodium methacrylate. After a stem (parent) chain was progressively propagated from an iniferter-immobilized surface under UV irradiation, chloromethylstyrene units in graft chains were dithiocarbamylated. Subsequently, a branch (daughter) chain was progressively propagated on multiply derivatized iniferter units in the stem chains. The repeated cycles of photopolymerization/dithiocarbamylation provided successively higher generations of graft architectures. The authors indicated that the chain length for both parent and daughter chains was controlled by photoirradiation time, and the degree of branching was determined by the composition of chloromethylstyrene units.
9.4
“Grafting From” Approach
The one-step “grafting from” approach relies basically on in-situ, surface-initiated polymerization. In order to achieve branched structures, a small multifunctional
173
174
9 Surface-Grafted Hyperbranched Polymers
molecule is required, which includes ABx monomers, AB* initiator-monomers (inimers), and cyclic inimers. These molecules form the branch points in the resulting hyperbranched polymers, which are formed during the growth of polymer chains. For the preparation of conventional hyperbranched polymers, several strategies are currently employed. The polymerization reactions are classified into three categories [1,4,53,54]: (1) Step-growth polycondensation of ABx monomers; (2) chain-growth self-condensing vinyl polymerization (SCVP) of AB* initiator-monomers (“inimers”); and (3) chain-growth self-condensing, ring-opening polymerization of cyclic inimers. The step-growth and chain growth methods are compared in Table 9.1. Although the most common method is the polycondensation of ABx monomers, vinyl monomers cannot be polymerized using that approach. The recent discovery of SCVP made it possible to use vinyl monomers for a convenient, one-pot synthesis of hyperbranched vinyl polymers with degree of a branching (DB) £ 0.5 [55–62]. Initiator-monomers (“inimers”) of the general structure AB* are used, where the double bond or heterocycle is designated A, and B* is a group capable of being activated to initiate the polymerization of vinyl groups or heterocycle. A variety of inimers have been reported, which include (meth)acrylate-type, styrene-type, and vinyl ether-type inimers [54]. Cationic [55], anionic [56], group transfer [57], controlled radical [58–62], and ring-opening mechanisms [63] have been used. In an ideal SCVP process, living polymerization systems are preferred in order to avoid crosslinking reactions and gelation caused by chain transfer or recombination reactions. By copolymerizing AB* inimers with conventional monomers, this technique was extended to self-condensing vinyl copolymerization (SCVCP), leading to highly branched copolymers with DB controlled by the comonomer ratio [64–67]. Depending on the chemical nature of the comonomer, various functional groups can be incorporated in the branched polymer, leading to highly branched polymers. Table 9.1
Classification of different types of monomers for the synthesis of hyperbranched poly-
mersa). [88]
Step growth AB2
A
OH
OSiMe3
B
HOOC
ClOC
B
I H
OH
OSiMe3
I
Self-condensing vinyl polymerization [68]
[68,70] O
B*
Chain growth AB*
Cl
O
O
Br
O
O
Br O
Self-condensing ring-opening polymerization [69] B*
a)
O O
[90]
OH
H
O OH
N
O
The monomers indicated with reference number were employed for the synthesis of surface-grafted hyperbranched polymers.
OH
O
O
9.4 “Grafting From” Approach
By using these techniques in combination with polymerization from initiators immobilized on the surface, a variety of surface-grafted hyperbranched polymers have been synthesized. The procedure is just a one-pot polymerization, which is significantly different from other approaches. As mentioned above, generally many tedious synthetic steps are necessary to reach the defined surface structures. We describe here a convenient synthetic approach for preparing hyperbranched (meth)acrylates on 2D and 3D surfaces in which a silicon wafer or silica nanoparticles grafted with an initiator layer composed of an a-bromoester fragment were used for SCVP via atom transfer radical polymerization (ATRP) (Scheme 9.2) [54]. SCVCP was also applied as a method for the synthesis of highly branched polymers grafted from surfaces. In contrast, surface-initiated ATRP resulted in the preparation of linear polymer brushes.
(a) SCVP I I I I I I
I
I
(b) SCVCP I
I
I I
I
I
I = ATRP initiator
(c) ATRP
Scheme 9.2 Synthesis of hyperbranched, highly branched, and linear polymer brushes from planar surfaces and spherical particles via surface-initiated polymerization. a) self-condensing vinyl polymerization (SCVP), b) self-condensing vinyl copolymerization (SCVCP), c) atom transfer radical polymerization (ATRP).
9.4.1
Synthesis of 2D Hybrids by Surface-Initiated, Self-Condensing Vinyl (Co)polymerization
The synthesis of hyperbranched (meth)acrylates grafted onto a planar surface was conducted by SCVP via ATRP from a silicon substrate [68]. The reaction mechanism is shown in Scheme 9.3. 2-(2-Bromopropionyloxy)ethyl acrylate (BPEA) and 2-(2-bromoisobutyryloxy)ethyl methacrylate (BIEM) were used as (meth)acrylic AB* inimers, where the double bond is designated A, and B* is a group capable of initiating the polymerization of vinyl groups. The formation of a 2-bromoisobutyryl fragment (B*) layer on the surface was conducted by the reaction of a trichlorosilyl derivative
175
176
9 Surface-Grafted Hyperbranched Polymers Functionalized Si wafer
AB* initiator-monomer (inimer)
Br
Br O
O
O
O
A (a vinyl group)
A-b-a
A-B* A-B* A-B* A-B* A-B* A-B*
A*
A-B* A-B*
B* B*
B* B*
A* B* a
B*
b
B* B*
A*B*
B*
A*B*
A*B* A*B*
A*B* A*
B* B*
A*B*
kA
A*
A-b-A* A-B* A-B* A-B* A*
B* B* b
B* B* B*
A*B*
A-b-A*
B*
A-B*
A*B*
A*B*
A
kB
: R1 = H, R 2= H : R1 = Me, R 2 = Me
B* (a group capable of initiating)
B* B*
A-B*
B* B* B*
BPEA BIEM
Br
O
R1
Si O
O
O
O
B* B* B*
= Si O
R2
O
O
b
kB A-B*
B* B*
A* B*
A-B* A* B*
A* b b
A*B*
A*
B* B*
A*B*
A*B* A*B* B* B*
B* B*
Scheme 9.3 Schematic illustration of SCVP of an AB* inimer from a functionalized Si surface. Capital letters indicate vinyl group (A) and active centers (A*, B*), and lower-case letters (a, b) represent reacted ones.
with a silicon wafer. Because both the AB* inimer and the functionalized silicon wafer have groups capable of initiating the polymerization, the chain growth can be started from both B* in the initiators immobilized on the silicon substrate, and a B* group in the inimer. Further addition of AB* inimer or dimer to A* and B* centers results in hyperbranched polymers. Because the polymer formed in solution may also add to active centers of attached polymers, the method described here can be considered as a combination of “grafting from” and “grafting to” approaches. SCVP of AB* inimers with the functionalized silicon wafer was conducted under various conditions. CuBr/N,N,N¢,N†,N†-pentamethyldiethylenetriamine (PMDETA) was used as a catalyst system for the polymerization of the acrylic inimer, whereas bis(triphenylphosphine)nickel(II) bromide ((PPh3)2NiBr2) was employed for the methacrylic inimer. For example, when the polymerization of the acrylic AB* inimer, BPEA, was performed in bulk at a ratio [BPEA]0:[CuBr]0 = 125 at 30 NC for 2 h, a viscous polymer with apparent number-average molecular weight Mn = 4200 and polydispersity index Mw/Mn = 2.28 (as determined by GPC using linear polystyrene standards) was obtained. Because chain growth can be started from both the B* initiators immobilized on the silicon wafer and from B* groups in the inimers, both ungrafted and grafted polymers can be produced. The unattached polymer chains were separated from the covalently bound polymers by Soxhlet extraction in THF, and used to estimate the molecular weight, the molecular weight distribution,
9.4 “Grafting From” Approach
and the degree of branching. Characterization of soluble polymer by 1H NMR suggested the formation of highly branched polymers (degree of branching = 0.47). The mean film thickness of the polymer layer was 7.5 – 1.0 nm.
(a)
Copolymerization (AB* and M)
SCVP of AB* A-B*
A-B*
M A-B* A-B* M M M
B* B*
B* B* B*
M
M
A-B*
A-B*
Homopolymerization (M: tBuA, MMA)
Hyperbranched polymer
M
M B*
M MM
B* B* B* B* B*
B* B* B* B* B*
(Highly) branched polymer
Linear polymer
M
(b) SFM images
Film thickness = ca. 7.5 nm
ca. 23 nm
ca. 9.0 nm
(c) XPS spectra 4200
7000
Br
5500
Intensity
4000
1000
2600
3600
2400
3000 75
600
70
2200 75
65
200
0
1000
600
70
65
200
Binding Energy (eV)
Figure 9.2 (a) Synthetic routes; (b) SFM images; and (c) XPS results of hyperbranched, highly branched, and linear polymers grafted from functionalized silicon wafers. (Reproduced with permission from Ref. [68].)
75
0
1000
600
70
65
200
0
177
178
9 Surface-Grafted Hyperbranched Polymers
Surface-initiated SCVP of BPEA was found to yield polymer films with a high degree of branching, and with a characteristic surface topography. Tapping mode scanning force microscopy (SFM) and X-ray photoelectron spectroscopy (XPS) were used to investigate the surface topography and chemical composition of the grafted hyperbranched polymers. Typical results are shown in Figure 9.2. A characteristic surface topography on a nanoscale is clearly visible by SFM, which may be attributed to branched architectures. The size and density of the nanoscale protrusions obtained on the surface and the film thickness were observed to depend on the polymerization conditions, such as the ratio [BPEA]0:[catalyst]0. Similar results were obtained by SCVP of the methacrylate-type inimer (BIEM). In this way, we have been able to create novel surface architectures, in which characteristic nano-protrusions with different densities and sizes are composed of hyperbranched polymers tethered directly to the surface. The chain architecture and chemical structure could be modified by SCVCP, leading to a facile, one-pot synthesis of surface-grafted branched polymers. The copolymerization gave an intermediate surface topography and film thickness between the polymer protrusions obtained from SCVP of an AB* inimer and the polymer brushes obtained by ATRP of a conventional monomer (Figure 9.2). The difference in the Br content at the surface between hyperbranched, branched, and linear polymers was confirmed by XPS, suggesting the feasibility of controlling the surface chemical functionality. The principal result of this work is a demonstration of utility of the surface-initiated SCV(C)P via ATRP to prepare surface-grafted hyperbranched and branched polymers having characteristic architecture and topography. Another approach is based on chain-growth self-condensing, ring-opening polymerization of cyclic inimers from immobilized initiators. Recently, Khan and Huck [69] demonstrated a new procedure to synthesize covalently linked hyperbranched polyglycidol brushes on Si/SiO2 via anionic self-condensing ring-opening polymerization of glycidol. Optimization of the polymerization experiments by exploiting reinitiation cycles showed that the polyglycidol brushes produced can achieve ellipsometric thickness values of 70 nm. These authors also reported modification of hydroxyl end groups, which allow the polarity of the polymer brushes to be tailored. 13 C NMR spectroscopy analysis of cleaved polymer allowed the elucidation of the structure and degree of branching of the polymer. 9.4.2
Synthesis of 3D Hybrids by Surface-Initiated Self-Condensing Vinyl (Co)polymerization
Synthesis of hyperbranched polymer-silica hybrid nanoparticles was conducted by SCVP via ATRP from silica surfaces (Scheme 9.4) [70]. A typical condition is a bulk polymerization of BPEA with the functionalized silica particles in the presence of CuBr/PMDETA at a ratio of [BPEA]0:[CuBr]0:[PMDETA]0 = 125:1:1. Under these conditions, full conversion was reached after 2 h at 30 NC. The weight fraction of the surface-attached poly(BPEA) chains obtained after Soxhlet extraction was ca. 3.2 g polymer g–1 silica. The number of the inimer (BPEA) units per silica particle is about 33 000, which can be calculated from the weight fraction and the number of
9.4 “Grafting From” Approach
Cl3Si (
)3
O
Br
B* B* B*
B*
O
Br
O
Br CH3
B*
SiO2 B*
O
O
H
H
H
O
O
SiO2
End group
AB* inimer (BPEA)
Surface-active initiator (B*)
B* B*
SiO2
SCVP
(a)
SCVCP (AB* inimer + tBuA)
SiO2
C H2 CH C
Hydrolysis
n
O
O
SiO2
C H2 CH C
(b)
n
O
OH
Scheme 9.4 Synthetic routes for: (a) a silica particle with hyperbranched polymer shell; and (b) a branched polyelectrolyte shell.
the silica particles per gram (2.3 P 1017 g–1 silica). The value corresponds to the number of end-groups per silica particle, which may be distributed on the outermost surface of the hybrid as well as inside the polymer chains. The surface coverage calculated by the elemental analysis and specific surface area of the bare silica substrate (200 m2 g–1) was 10–21 mg m–2, depending upon the polymerization conditions. Calculation from the weight fraction shows that about 10–20% of BPEA polymerizes from the surface of the silica nanoparticles under the conditions used in this study. The successful preparation of hyperbranched polymer-silica hybrid nanoparticles was confirmed by FT-IR measurements (strong C=O vibration at 1740 cm–1 and broad Si-O stretching vibration around 1100 cm–1) and elemental analyses (carbon content = 28.0–32.9% in the products obtained by the bulk polymerization). The bulk polymerization of BPEA with the functionalized silica particles yielded well-defined hybrid nanoparticles comprised of silica cores and hyperbranched polymer shells having multifunctional bromoester end groups. Such surface multifunctionality is ideally independent of the surface curvature of the core particle and the layer thickness of the polymer shell, which could not be achieved by linear polymers. The soluble polymers obtained in the bulk polymerization at a ratio of [BPEA]0/ [CuBr]0 = 50 and 125 showed absolute molecular weights (Mn,GPC-VISCO = 23 800 and 30 800 using universal calibration), which are much higher than the corresponding
179
180
9 Surface-Grafted Hyperbranched Polymers
(b)
(a)
100 nm
200 nm
(c)
400 nm
(d)
Figure 9.3 Representative field emission-scanning electron microscopy (FE-SEM) images of the branched PtBuA-silica hybrid nanoparticles obtained by self-condensing vinyl copolymerization (SCVCP) of 2-(2-bromopropionyloxy)-
400 nm
ethyl acrylate (BPEA) and tert-butyl acrylate (tBuA) at c = [tBuA]0/[BPEA]0 = 6.1 (a, b) and =1.1 (c, d). (Reproduced with permission from Ref. [70].)
apparent values (Mn = 4600 and Mw/Mn = 2.9 and 2.3, as determined by GPC using linear standards). Note that the determination of the molecular weights of branched polymers is complicated because the hydrodynamic volume for a given molecular weight differs significantly from that of a linear sample. Accurate molecular weights can be obtained by the use of mass-sensitive on-line detectors such as a multi-angle light scattering photometer (MALS) [71,72] or a viscosity detector using the universal calibration (UNICAL) principle [73,74]. Higher molecular weights determined by GPC/viscosity using universal calibration than the corresponding apparent values are due to a lower hydrodynamic volume of the hyperbranched polymers, indicating the formation of compact architectures. Low values of the Mark-Houwink exponent (a = 0.36–0.38) showed undoubtedly a densely packed, 3D structure resulting from the hyperbranched topology. The exponent is typically in the region of 0.6–0.8 for linear homopolymers in a good solvent with a random coil conformation. The contraction factors [75], g = branched/linear, g¢ = [g]branched/[g]linear , are another way of expressing the compact structure of branched polymers. Further detailed characterization of hyperbranched polymers, such as the Mark-Houwink plots, log
9.4 “Grafting From” Approach
[g] versus log M, and contraction factor, g¢ = [g]branched/[g]linear , as a function of log M, can be found in a recent review [54] and an article [76]. The degree of branching (DB = 0.43–0.44) determined by 1H NMR indicates the achievement of the highly branched structures. The grafting density, molecular weights and degree of branching of the hyperbranched polymers could be manipulated by simply changing the polymerization conditions. SCVCP of BPEA and tert-butyl acrylate (tBuA) from the functionalized silica nanoparticles created branched PtBuA-silica nanoparticles. The functionality of the end-groups on the surface, and the chemical composition as well as the structure of the branched polymers grafted on the silica nanoparticles, could be controlled by composition in the feed during the SCVCP, as confirmed by elemental analysis and FT-IR measurement. Characterization using field emission-scanning electron microscopy (FE-SEM; Figure 9.3), transmission electron microscopy (TEM), scanning force microscopy (SFM), and dynamic light scattering (DLS) measurements indicated that the hybrid nanoparticles comprising the silica core and the hyperbranched polymer shell exist as isolated and aggregated forms. Novel hybrid nanoparticles with branched polyelectrolytes, poly(acrylic acid) (PAA)-silica, were obtained after hydrolysis of linear segments of the branched PtBuA, as can be seen in Scheme 9.4. The resulting hybrid material can be regarded as a characteristic branched polyelectrolyte [77]. These polymers, when grafted onto the nanoparticles, can be designed to have a fairly open structure, allowing the functional materials (e.g., metal ions) to penetrate the film more easily than in conventional linear polymer layers. SCVCP was also applied for the synthesis of branched PAAs having different molecular weights and degree of branching [76,78]. In order to understand the growth characteristics of the surface-initiated polymerization as well as the molecular parameters of the grafted polymers, it is necessary to cleave these chains from the surface at their points of attachment. However, attempts to achieve this were unsuccessful in the case of the hybrids prepared by the technique described here. For example, treatment of the hyperbranched polymer-silica hybrid particles in toluene suspension with aqueous HF (5%) and a phase-transfer catalyst, which has been used to detach polystyrene or PMMA grafted to a silica surface [79,80], was found to provide only low-molecular-weight products. This may be due to chain scission reactions on ester linkages of the poly(BPEA), which was also confirmed by NMR measurements of the soluble fraction and FT-IR measurement of the remaining insoluble part. Further experimental efforts are required to clarify the relationship between the molecular parameters (molecular weights, molecular weight distribution, and degree of branching) of hyperbranched polymers formed in solution and on the surface. 9.4.3
Theoretical Considerations
A series of theoretical studies of the SCV(C)P have been reported [81–87], which provide valuable information on the kinetics, the molecular weights, the molecular weight distribution (MWD), and the degree of branching (DB) of the polymers
181
182
9 Surface-Grafted Hyperbranched Polymers Molecular parameters of polymers obtained by self-condensing vinyl polymerization and copolymerizationa)
Table 9.2
SCVP of AB*
Copolymerization of AB* + M
Polymerization without initiator
DB » 1/2 [81,82] MW =Mn » 1 + DPn
DB » 2/(c + 1) (c >> 1) [85,86] MW =Mn = 1 + DPn /(c + 1)
Polymerization with multifunctional initiator (batch)
DB » 1/2 [83] 2 MW =Mn = 1 + DPn =f
DB » 2/(c + 1) (c >> 1) [87] MW =Mn = 1 + DPn /(c + 1) f 2
Polymerization with multifunctional initiator (semi-batch)b)
DB » 2/3 [84] MW =Mn » 1 + 1/f
DB » 2/(c + 1) (c >> 1) [87] MW =Mn = 1 + 1 / f
a) b)
DB: degree of branching, f: initiator functionality, c: [M]0/[AB*]0. Semi-batch = slow monomer addition.
obtained. The calculated MWD and DB of hyperbranched polymers obtained by SCVP and SCVCP under various conditions are summarized in Table 9.2. All calculations were conducted assuming an ideal case – that is, no cyclization, no excluded volume effects, and no side reactions. The calculated MWD of polymers formed in SCVP without initiators (conventional SCVP in bulk or solution) is broader than that obtained from SCVP in the presence of multifunctional initiators, B*f [83,84]. The presence of these initiators leads to a considerable narrowing of the polydispersity index, which decreases with increasing initiator functionality, f. Thus, the molecular weights and MWD of the ungrafted polymer obtained in solution might be different from those of the grafted polymer produced by a surface-initiated SCVP. On the other hand, the effect of the f-functional initiators on the DB was calculated to be negligible under batch conditions used here (i.e., inimers and initiators grafted on the surface are mixed instantaneously) [83]. This indicates that the DB does not depend on whether the polymer is formed in solution or on the surfaces. Therefore, it is reasonable to suppose that SCVP of the inimer with functionalized silica particles (or silicon wafers) provides surface-grafted poly(acrylate)s having a highly branched structure, even if the correlation of the molecular parameters of the soluble polymers with the polymers grafted on the surface is not confirmed experimentally. 9.4.4
Other Systems
In addition to SCV(C)P of AB* inimers, several one-step “grafting from” approaches have been recently reported for the synthesis of surface-grafted hyperbranched polymers (Table 9.1). One approach is the polycondensation of ABx monomers. For example, a one-step AB2-type polycondensation, which takes place on an insoluble solid support, was reported by Moore and colleagues [88,89]. These authors showed that hyperbranched polymers with low polydispersity and controlled molecular weights could be produced by this method. This is an approach toward a challenging
9.4 “Grafting From” Approach
goal in this field, which is the development of general polymerization methods to produce hyperbranched polymer with controlled DB and narrow MWD. By contrast, Kim et al. [90] reported the preparation of hyperbranched polymers on solid supports, such as Si wafers and fused SiO2, by using aziridines as cyclic monomers and an aminosilylated substrate as an initiator-modified surface. These authors indicated that the primary amine on the substrate is good enough to initiate the ring-opening polymerization of aziridine, leading to highly branched poly(ethyleneimine), as confirmed by measuring the thickness of the film and the absolute density of the primary amine functionality. In this case, branching is generated by a transfer reaction.
Summary
A variety of surface-grafted hyperbranched polymers have been synthesized using three different methods, namely “grafting to”, “grafting from”, and multi-step grafting approaches. A novel synthetic concept, surface-initiated self-condensing vinyl (co)polymerization was demonstrated, which is a first example of the one-step “grafting from” technique for the synthesis of the surface-grafted hyperbranched polymers. The development of various 2D and 3D hybrid materials with hyperbranched (meth)acrylate polymers could be achieved using this method. This methodology has a high feasibility to manipulate a variety of important parameters, such as grafting density, surface topography, branched architectures, functionality, molecular weights, simply by changing the polymerization conditions. This development substantially broadens and extends the scope of the surface-grafted hyperbranched polymers, which have unique properties and numerous possible practical applications. A well-controlled synthesis for these materials should lead to the creation of an entirely new category of materials which are controllable on the nanoscale, and have chemically sensitive interfaces.
Acknowledgments
The authors would like to thank the Deutsche Forschungsgemeinschaft (DFG) for financial support.
183
9 Surface-Grafted Hyperbranched Polymers
184
References 1 M. Jikei, M. Kakimoto, Prog. Polym. Sci. 2 3 4 5 6 7 8
9
10 11 12 13
14
15 16 17
18 19 20
21 22
2001, 26, 1233–1285. B. Voit, J. Polym. Sci. Part A: Polym. Chem. 2000, 38, 2505–2525. A. V. Ambade, A. Kumar, Prog. Polym. Sci. 2000, 25, 1141–1170. A. Sunder, J. Heinemann, H. Frey, Chem. Eur. J. 2000, 6, 2499–2506. B. Zhao, W. J. Brittain, Prog. Polym. Sci. 2000, 25, 677–710. J. Pyun, K. Matyjaszewski, Chem. Mater. 2001, 13, 3436–3448. S. S. Sheiko, M. MVller, Chem. Rev. 2001, 101, 4099–4123. K. L. Beers, S. G. Gaynor, K. Matyjaszewski, S. S. Sheiko, M. MVller, Macromolecules 1998, 31, 9413–9415. H. G. Boerner, K. Beers, K. Matyjaszewski, S. S. Sheiko, M. MVller, Macromolecules 2001, 34, 4375–4383. G. Cheng, A. BVker, G. Krausch, A. H. E. MWller, Macromolecules 2001, 34, 6883–6888. M. Zhang, T. Breiner, H. Mori, A. H. E. MWller, Polymer 2003, 44, 1449–1458. D. C. Tully, J. M. J. FrHchet, Chem. Commun. 2001, 1229–1239. A. Hierlemann, J. K. Campbell, L. A. Baker, R. M. Crooks, A. J. Ricco, J. Am. Chem. Soc. 1998, 120, 5323–5324. J. Li, L. T. Piehler, D. Qin, J. R. Baker, Jr., D. A. Tomalia, D. J. Meier, Langmuir 2000, 16, 5613–5616. G. Sui, M. Micic, Q. Huo, R. M. Leblanc, Langmuir 2000, 16, 7847–7851. M. E. Mackay, G. Carmezini, B. B. Sauer, W. Kampert, Langmuir 2001, 17, 1708–1712. D. Beyerlein, G. Belge, K.-J. Eichhorn, G. Gauglitz, K. Grundke, B. Voit, Macromol. Symp. 2001, 164, 117–131. H. Frey, Angew. Chem. Int. Ed. 1998, 37, 2193–2197. A. D. SchlWter, J. P. Rabe, Angew. Chem. Int. Ed. 2000, 39, 864–883. B. Karakaya, W. Claussen, K. Gessler, W. Saenger, A. D. SchlWter, J. Am. Chem. Soc. 1997, 119, 3296–3301. A. D. SchlWter, Topics in Current Chemistry 1998, 197, 165–191. D. C. Tully, A. R. Trimble, J. M. J. FrHchet, K. Wilder, C. F. Quate, Chem. Mater. 1999, 11, 2892–2898.
23 A. Sidorenko, X. W. Zhai, S. Peleshanko,
24
25
26 27
28
29 30
31 32 33
34
35
36
37
38
39 40
A. Greco, V. V. Shevchenko, V. V. Tsukruk, Langmuir 2001, 17, 5924–5931. C. B. Gorman, R. L. Miller, K.-Y. Chen, A. R. Bishop, R. T. Haasch, R. G. Nuzzo, Langmuir 1998, 14, 3312–3319. D. C. Tully, K. Wilder, J. M. J. FrHchet, A. R. Trimble, C. F. Quate, Adv. Mater. (Weinheim, Germany) 1999, 11, 314–318. M. Wells, R. M. Crooks, J. Am. Chem. Soc. 1996, 118, 3988–3989. H. Tokuhisa, M. Zhao, L. A. Baker, V. T. Phan, D. L. Dermody, M. E. Garcia, R. F. Peez, R. M. Crooks, T. M. Mayer, J. Am. Chem. Soc. 1998, 120, 4492–4501. W. M. Lackowski, J. K. Campbell, G. Edwards, V. Chechik, R. M. Crooks, Langmuir 1999, 15, 7632–7638. V. Chechik, R. M. Crooks, Langmuir 1999, 15, 6364–6369. R. Benters, C. M. Niemeyer, D. Drutschmann, D. Blohm, D. Woehrle, Nucleic Acids Res. 2002, 30, e10/11–e10/17. R. Benters, C. M. Niemeyer, D. Wohrle, ChemBioChem 2001, 2, 686–694. Z.-X. Guo, J. Yu, J. Mater. Chem. 2002, 12, 468–472. B. T. Mathews, A. E. Beezer, M. J. Snowden, M. J. Hardy, J. C. Mitchell, New J. Chem. 2001, 25, 807–818. M. Driffield, D. M. Goodall, A. S. Klute, D. K. Smith, K. Wilson, Langmuir 2002, 18, 8660–8665. Y. Zhou, M. L. Bruening, D. E. Bergbreiter, R. M. Crooks, M. Wells, J. Am. Chem. Soc. 1996, 118, 3773–3774. M. L. Bruening, Y. Zhou, G. Aguilar, R. Agee, D. E. Bergbreiter, R. M. Crooks, Langmuir 1997, 13, 770–778. J. G. Franchina, W. M. Lackowski, D. L. Dermody, R. M. Crooks, D. E. Bergbreiter, K. Sirkar, R. J. Russell, M. V. Pishko, Anal. Chem. 1999, 71, 3133–3139. M. Zhou, Y. Zhou, M. L. Bruening, D. E. Bergbreiter, R. M. Crooks, Langmuir 1997, 13, 1388–1391. D. L. Dermody, R. F. Peez, D. E. Bergbreiter, R. M. Crooks, Langmuir 1999, 15, 885–890. R. F. Peez, L. D. Dermody, J. G. Franchina, S. J. Jones, M. L. Bruening, D. E. Bergbreiter,
References
41 42 43
44
45 46 47 48
49
50
51 52 53 54 55
56 57
58
59
60
R. M. Crooks, Langmuir 1998, 14, 4232– 4237. W. M. Lackowski, P. Ghosh, R. M. Crooks, J. Am. Chem. Soc. 1999, 121, 1419–1420. A. Aoki, P. Ghosh, R. M. Crooks, Langmuir 1999, 15, 7418–7421. P. Ghosh, M. L. Amirpour, W. M. Lackowski, M. V. Pishko, R. M. Crooks, Angew. Chem. Int. Ed. 1999, 38, 1592–1595. D. E. Bergbreiter, G. Tao, J. G. Franchina, L. Sussman, Macromolecules 2001, 34, 3018– 3023. D. E. Bergbreiter, G. Tao, J. Polym. Sci. Part A: Polym. Chem. 2000, 38, 3944–3953. G. Tao, A. Gong, J. Lu, H.-J. Sue, D. E. Bergbreiter, Macromolecules 2001, 34, 7672–7679. M. Nagale, B. Y. Kim, M. L. Bruening, J. Am. Chem. Soc. 2000, 122, 11670–11678. N. Tsubokawa, H. Ichioka, T. Satoh, S. Hayashi, K. Fujiki, React. Func. Polym. 1998, 37, 75–82. K. Fujiki, M. Sakamoto, T. Sato, N. Tsubokawa, J. Macromol. Sci., Pure Appl. Chem. 2000, A37, 357–377. N. Tsubokawa, T. Satoh, M. Murota, S. Sato, H. Shimizu, Polym. Adv. Tech. 2001, 12, 596– 602. H. J. Lee, Y. Nakayama, T. Matsuda, Macromolecules 1999, 32, 6989–6995. Y. Nakayama, M. Sudo, K. Uchida, T. Matsuda, Langmuir 2002, 18, 2601–2606. H. Galina, J. B. Lechowicz, e-Polymers 2002, Paper No. 12. H. Mori, A. H. E. MWller, Topics in Current Chemistry 2003, 228, 1–37. J. M. J. FrHchet, M. Henmi, I. Gitsov, S. Aoshima, M. R. Leduc, R. B. Grubbs, Science (Washington, D. C.) 1995, 269, 1080– 1083. D. Baskaran, Macromol. Chem. Phys. 2001, 202, 1569–1575. P. F. W. Simon, W. Radke, A. H. E. MWller, Macromol. Rapid. Commun. 1997, 18, 865– 873. C. J. Hawker, J. M. J. FrHchet, R. B. Grubbs, J. Dao, J. Am. Chem. Soc. 1995, 117, 10763– 10764. M. W. Weimer, J. M. J. FrHchet, I. Gitsov, J. Polym. Sci. Part A: Polym. Chem. 1998, 36, 955–970. K. Matyjaszewski, S. G. Gaynor, A. Kulfan, M. Podwika, Macromolecules 1997, 30, 5192– 5194.
61 K. Matyjaszewski, S. G. Gaynor, A. H. E.
MWller, Macromolecules 1997, 30, 7034–7041. 62 K. Matyjaszewski, S. G. Gaynor, Macromole-
cules 1997, 30, 7042–7049. 63 A. Sunder, R. Hanselmann, H. Frey, R. MWl-
haupt, Macromolecules 1999, 32, 4240–4246. 64 J. M. J. FrHchet, S. Aoshima, 1996,
WO9614345, WO9614346. 65 S. G. Gaynor, S. Edelman, K. Matyjaszewski,
Macromolecules 1996, 29, 1079–1081. 66 P. F. W. Simon, A. H. E. MWller, Macromole-
cules 2001, 34, 6206–6213. 67 C. Paulo, J. E. Puskas, Macromolecules 2001,
34, 734–739. 68 H. Mori, A. BVker, G. Krausch, A. H. E. MWl-
ler, Macromolecules 2001, 34, 6871–6882. 69 M. Khan, W. T. S. Huck, Macromolecules
2003, 36, 5088–5093. 70 H. Mori, D. Chan Seng, M. Zhang, A. H. E.
MWller, Langmuir 2002, 18, 3682–3693. 71 P. J. Wyatt, Anal. Chim. Acta 1993, 272,
1–40. 72 P. J. Wyatt, J. Chromatogr. 1993, 648, 27–32. 73 H. BenoYt, Z. Grubisic, P. Rempp, D. Decker,
J. G. Zilliox, J. Chem. Phys. 1966, 63, 1507– 1514. 74 R. A. Sanayei, K. G. Suddaby, A. Rudin, Makromol. Chem. 1993, 194, 1953–1963. 75 W. Burchard, Adv. Polym. Sci. 1999, 143, 113–194. 76 H. Mori, D. Chan Seng, H. Lechner, M. Zhang, A. H. E. MWller, Macromolecules 2002, 35, 9270–9281. 77 J. Bohrisch, C. D. Eisenbach, W. Jaeger, H. Mori, A. H. E. MWller, M. Rehahn, C. Schaller, S. Traser, P. Wittmeyer, Adv. Polym. Sci. 2004, 165, 1–41. 78 H. Mori, A. H. E. MWller, Prog. Polym. Sci. 2003, 28, 1403–1439. 79 T. von Werne, T. E. Patten, J. Am. Chem. Soc. 1999, 121, 7409–7410. 80 T. von Werne, T. E. Patten, J. Am. Chem. Soc. 2001, 123, 7497–7505. 81 A. H. E. MWller, D. Yan, M. Wulkow, Macromolecules 1997, 30, 7015–7023. 82 D. Yan, A. H. E. MWller, K. Matyjaszewski, Macromolecules 1997, 30, 7024–7033. 83 W. Radke, G. I. Litvinenko, A. H. E. MWller, Macromolecules 1998, 31, 239–248. 84 D. Yan, Z. Zhou, A. H. E. MWller, Macromolecules 1999, 32, 245–250. 85 G. I. Litvinenko, P. F. W. Simon, A. H. E. MWller, Macromolecules 1999, 32, 2410–2419.
185
186
9 Surface-Grafted Hyperbranched Polymers 86 G. I. Litvinenko, P. W. F. Simon, A. H. E.
MWller, Macromolecules 2001, 34, 2418–2426. 87 G. I. Litvinenko, A. H. E. MWller, Macromolecules 2002, 35, 4577–4583. 88 P. Bharathi, J. S. Moore, J. Am. Chem. Soc. 1997, 119, 3391–3392.
89 P. Bharathi, J. S. Moore, Macromolecules
2000, 33, 3212–3218. 90 H. J. Kim, J. H. Moon, J. W. Park, J. Colloid
Interface Sci. 2000, 227, 247–249.
Part II
Characterization
189
10
The Analysis and Characterization of Polymer Brushes: From Flat Surfaces to Nanoparticles Rigoberto C. Advincula
Abstract
The study of polymer brushes has been of great interest, not only for their synthesis but also for their unique properties and characterization approaches. The analysis of these polymers is a challenge. Because of their reduced dimensionality, assumptions based on analogous solution or bulk systems do not necessarily hold. There is a desire to understand their fundamental properties at interfaces and in developing new applications. The interface is a highly anisotropic environment where a variety of conditions exists (e.g., surface energy, polarity, electrical double layer), not to mention the various geometries, size, shape, and surface properties of the solid-support substrate to which the polymer is bound. This review begins with a short description of the variety of polymer brush systems and solid-support substrates that have been investigated. It introduces the uniqueness of the polymer brush approach and the challenges on their characterization. The importance of using and interpreting the right analysis methods is emphasized. In general, this can be divided into spectroscopic, microscopic, and optical in approach, although other classifications can be mentioned. Both in-situ and ex-situ methods are possible. This chapter is not meant to be comprehensive, but is structured to provide a survey of the various options and possibilities in approaching the analyses of polymer brushes. While a number of analytical methods have focused on “grafted to” systems, an emphasis on this review will be on “grafted from” systems or those prepared by surface-initiated polymerization (SIP). Indeed, other than synthesis, a large part of the success in investigating the phenomena of polymer brushes is proving their dimensionality and that the physical and chemical properties of polymers are unique when tethered to surfaces.
190
10 The Analysis and Characterization of Polymer Brushes
10.1
Introduction 10.1.1
Polymer Brushes
The idea of confining long-chain macromolecules to surfaces has always intrigued polymer scientists. Theories and scaling parameters abound which predict their stretching behavior versus random walk configuration in solutions. An assembly of these polymer chains which are tethered by one end to a surface or an interface can be termed as “polymer brushes” [1]. This tethering is of sufficient density such that the polymer chains are crowded and forced to stretch away from the surface to avoid crowding. They are an essential model for investigating practical polymer systems such as the formation of polymer micelles; block copolymer equilibration at fluid– fluid interfaces, formation of microemulsions and vesicles, physically or chemically grafted polymers on a solid surface, and adsorbed diblock copolymers. In all of these systems, the conditions of the subphase (solvent), temperature, osmotic pressure, will affect the degree to which they reach equilibrium. Within the polymer system itself the presence of noncovalent interactions, grafting density, molecular weight, polydispersity, etc. are factors which also determine their stretch configuration. The deformation of these polymer chains is generally a contribution of both interaction and elastic free energies. The internal structure of polymer brushes has also been investigated by numerical and analytical self-consistent field (SCF) calculations, and by computer simulations [2]. Practically, polymer brushes are of interest for surface modification [3]: adhesives, biosurfaces [4], lubrication [5], separations, compatibilizers [6], and composite material preparation [7]. In the area of coatings, ultrathin and patterned organic films could be prepared which are useful in microelectrics, cell growth control, biomimetic material fabrication, microfluidics, and drug delivery. All the combinations that are possible for polymer brushes in terms of: composition, molecular weight, polydispersity, density, block sequencing, and microstructure are intriguing for each type of application. Functional polymers such as rigid rods, cross-linkable groups, side-chain functional groups, and polyelectrolyte behavior all have unique functions when localized to surfaces. The idea of modifying surfaces of inorganic solids with organic polymers can also be visualized as a type of “shell” or coating that gives the substrate the surface properties of a polymer. A number of model surface grafting techniques have been investigated on planar surfaces and particles. In general, this can be classified as either physical adsorption or “physisorption” and chemical adsorption or “chemisorption”. Physisorption involves the adsorption of functionalized homopolymers or block copolymers with “anchoring groups” from solution or melt [8]. The physical structure and density of such adsorbed layers are difficult to control both from entropic and enthalpic considerations. Nevertheless, these systems have been well investigated and have benefited from many innovative in-situ methods of surface analysis. By chemisorption, adhesion between polymer and the substrate may be greatly
10.1 Introduction
enhanced due to surface covalent attachment. This approach involves reaction of end-functionalized polymers with reactive sites on a substrate surface [9]. However, a disadvantage of this grafting method is that chain-ends have to first find their way to the surface and react. Like physisorption, a major impediment is that polymer chains already attached at the beginning of the reaction sterically shields the remaining surface reactive sites such that brush density becomes self-limiting [10]. While, chemisorption is related to the study of self-assembled monolayers (SAM), it is obvious that tethered polymers are unique systems with very different thermodynamic and kinetic considerations compared to small molecule amphiphiles. Thus, both physisorption and chemisorption have their drawbacks with a “grafting to” surface approach (Figure 10.1). In this respect, “grafting from” surfaces by surface- initiated polymerization (SIP) has important advantages in terms of polymer brush densities and other physical properties. SIP promotes polymerization of monomers directly from initiator sites already attached to surfaces, in which case activation of the initiator, interface properties and diffusion of monomers to the reactive sites are the primary factors [11]. Furthermore, it is possible to prepare grafted polymers where the average distance between grafting points is much smaller than the radius of gyration (Rg). This allows a linear scaling between the degree of polymerization and equilibrium thickness of a film. Thus, this SIP approach appears to be more promising and versatile for preparing tethered polymer brushes [12]. They can be prepared by a number of polymerization mechanisms including; free radical [11], cationic [13], ring-opening metathesis polymerization (ROMP) [14], atom transfer free-radical polymerization (ATRP) [15], polymerizations using 2,2,6,6-tetramethyl1-piperidyloxy (TEMPO) [16], reversible addition-fragmentation transfer (RAFT) polymerization [17], and anionic polymerization [18]. All of these methods are suit-
Surface Initiated Polymerization "Grafting from"
Chemisorption or Physisorption "Grafting onto"
General diagram of the polymer brush approach: “grafting to” versus “grafting from” approaches. The influence of grafting density and the enthalpic and entropic factors are clearly present in the “grafting onto” approach.
Figure 10.1
191
192
10 The Analysis and Characterization of Polymer Brushes
able for polymerizing different types of monomers on a variety of flat surfaces and particles. More, recently a number of innovative analytical tools both for particle and surface analysis have allowed elucidation of polymerization mechanism and physical properties of these tethered polymers. 10.1.2
SIP on Flat Surfaces and Particle Substrates
By focusing on SIP in flat ideal surfaces, it is possible to take advantage of a wide range of surface-sensitive spectroscopic and microscopic analytical techniques. Flat substrates that have been investigated include glass, quartz, Si wafer, Au-coated glass, and aluminum. There is potential for tailored polymer brush applications via surface modification and patterning [19]. Theoretical predictions have been used to calculate the molecular weight (MW) and polydispersity of polymer brushes grown by SIP on flat surfaces [20]. Other theoretical predictions have been made on the conformation and dynamic behavior of tethered polymers at flat surfaces [21]. It is always interesting to observe theoretical predictions on block copolymer brush behavior with respect to the Flory-Huggins (v) interaction parameter, Kuhn length, block volume fraction, and substrate surface energies [22]. Particle surface modification is an important procedure for improving the processing properties of colloidal dispersions and in the preparation of composite materials. This involves preventing flocculation, improving rheological properties, and adding thermodynamic stability to formulations. In the case of composite materials, the preparation of homogeneous compositions with thermodynamic stability, controlled phase separation, delamination and rheology, are important. Again, polymer brushes on particle surfaces can be approached both by grafting to and grafting from procedures. Polymerization from particle surfaces is challenging from the perspective of performing surface chemistry with colloids [23]. The particle size and geometry vary; likewise, the surface energy and solvent polarity changes, which can make a difference in terms of forming stable dispersions in selective solvents at each stage of the polymerization process. There are a number of analytical techniques which have been used to investigate this hybrid systems in situ. One of the compelling reasons to carry out SIP on particles is that it offers the advantage of preparing large quantities of SIP-grown polymers that can be degrafted and extensively analyzed ex situ. This is because of the high surface to volume ratio afforded by these substrates. However, it is also advantageous to characterize these systems with the polymers still grafted onto the particles for the sake of learning more about certain fundamental properties of colloids [23]. With the recent popularity of the SIP protocols, the controlled grafting densities poses unique parameters and conditions towards various polymerization mechanisms (initiation, propagation, termination, etc.) that warrants comparison with solution or bulk polymerization methods [24]. In terms of chemistries involved at the interface, the homogeneity or heterogeneity of the system and the differences between the bulk phase defines the lifetime of the initiator, the flux of the monomer,
10.2 Characterization of Ultrathin Polymer Films and Polymer Brushes
and the rate of termination. In other words, a detailed characterization involving surface-sensitive methods is very important. Again, fortunately, when dealing with flat surfaces, a variety of new and innovative techniques is available and have been applied to both physisorbed and chemisorbed polymer brushes. Direct surface characterization is even more challenging when dealing with particle surfaces. The interface is a highly anisotropic environment where a variety of conditions exists (e.g., surface energy, polarity, electrical double layer), not to mention the various geometries, size, shape, and surface properties of the solid-support substrate to which the polymer is bound. The behavior of polymer brushes under electric field, temperature gradient, solvent polarity, photochemical effects, and flow gradients can lead to novel types of field-responsive polymers. The importance of using the correct analysis methods and interpreting the results is emphasized. In general, this can be divided into spectroscopic, microscopic, and optical in approach. Both in-situ and ex-situ methods are possible. Other methods include: acoustic, mechanical, gravimetric, direct-surface force measurements, and electrochemical. This chapter is not meant to be comprehensive; rather, it is structured to provide a survey of the various options and possibilities in approaching the analyses of polymer brushes. While a number of the spectroscopic and microscopic methods have been reported for physisorbed polymer brushes, the contents of this chapter do not necessarily focus on these systems.
10.2
Characterization of Ultrathin Polymer Films and Polymer Brushes
The study of ultrathin organic and polymer films has been the subject of extensive investigations for the past few decades. They have important applications in microelectronics, electro-optics and biotechnology, and also facilitate the study of the fundamental nature of surfaces [25]. In most cases, they have finite thicknesses of a few to several hundred nanometers, on a variety of solid substrate-supported systems. The quasi two-dimensional ordering within layers can be extended into stacked structures perpendicular to the solid substrate. Patterning by both lithographic and nonlithographic techniques results in films with features ranging from a few nanometers (nanopatterning) to microns (micropatterning) [26]. Spin coating is the most common method for preparing ultrathin films, and is widely used in the microelectronics industry for photolithography. Other methods, based on “molecular or macromolecular assemblies”, have largely driven the forefront of organic ultrathin films research. The interest in highly-ordered ultrathin film fabrication methods such as alternate polyelectrolyte (APD) [27], Langmuir-Blodgett (LB) technique [28], and selfassembled monolayers (SAM) [29], have paved the way for a variety of analytical methods that can be used to probe the thickness, mesophases, microstructure, and optical properties of other ultrathin film systems (Figure 10.2). Thus, the same techniques on the various molecular and macromolecular assemblies mentioned above, can be applied to the study of polymer brushes on a solidsupport substrate. As mentioned, the characterization can primarily be divided into
193
194
10 The Analysis and Characterization of Polymer Brushes
spin-coating
self-assembled monolayer (SAM)
Langmuir-Blodgett-Kuhn (LBK)
alternate polyelectrolyte deposition (APD)
Different types of organic molecular and macromolecular assemblies on flat, ultrathin film substrates. These have finite thicknesses of a few to several hundred nanometers, on a variety of solid substrate-
Figure 10.2
vacuum deposition and OMBE
supported systems. The quasi two-dimensional ordering within layers can be extended into stacked structures perpendicular to the solid substrate.
surface-sensitive spectroscopic, microscopic and optical techniques (Table 10.1). This involves both in-situ and ex-situ techniques – that is, during and after grafting or after the whole film has been formed. As will be described, polymer brushes on flat surfaces offers unique properties that differ from those of other organic and polymer ultrathin films. 10.2.1
Spectroscopy and Optical Techniques
Spectroscopic methods such as ultra-violet-visible (UV-vis) absorbance, fluorescence, and other intensity-sensitive spectroscopic techniques can, in principle, be used to investigate change in optical constants, optical thickness, energy transfer procession, and monitor film growth in situ. UV-vis spectroscopy is a direct method for following the linearity of the polymer film build-up because of the ease in obtaining absorbance spectra either by transmission or reflection from absorbing species. Fluorescence measurements can be used where there are fluorophore probes present on a polymer brush, or for monitoring photochemical conversion and energytransfer properties. The formation of uniform polymer films can also be verified and observed by Xray reflectivity and other scattering methods [30]. X-ray diffraction can reveal Bragg peaks only on systems where there is high electron density contrast between layers or crystallinity. This can be used to determine the d-spacing for distinct layered systems. Neutron diffraction and reflectometry can be used, relying on deuterated spe-
10.2 Characterization of Ultrathin Polymer Films and Polymer Brushes
cies within layers [31]. The importance of these techniques is the fact that the mobility of polymer chains, diffusion within layers, and short-range and long-range order parameters can be correlated with other spectroscopic and microscopic techniques. In a kinematic approximation, the reflectivity R of a laterally homogeneous, surfaceassociated structure as function of the momentum transfer, Qz, is related to the scattering length density (SLD) – that is, the electron density or neutron SLD. The appearance of Kiessig fringes in X-ray and neutron reflectometry can be used to determine the thickness of the films and the relationship between the layers of the substrate, film, and subphase (air) [32]. Techniques for determining the chemical functional group and molecular (elemental) species also include FT-IR and X-ray photoelectron spectroscopy (XPS) [33]. XPS in particular is useful for monitoring the presence of different oxidized states of atoms, relative abundance of atomic species, and the presence of the substrate. FT-IR and IR-RAS has been used to monitor specific IR-sensitive functional groups, even at monolayer thicknesses [34]. This can be used to monitor attachment of polymers on surfaces starting from the initiator fixation stage by SAM. It also allows chemical group identification of polymers that have undergone chemical conversion. Several surface-sensitive FT-IR methods are available, from grazing incidence to polarization-modulated infra-red reflection absorption spectroscopy (PM-IRRAS) [18a]. Optical techniques can be used to monitor optical thickness and dielectric constant parameters. This includes ellipsometry, multiple reflection interferometry [35], and evanescent wave [36] and surface plasmon resonance spectroscopy (SPS) techniques [37]. Ellipsometry has been used widely and routinely to investigate film thickness of polymer brush films [38]. For example, null or spectroscopic ellipsometric data with in-situ solvent swelling experiments, involves exposure of solvent with constant evaporation rate and temperature, and has been used to estimate the MW of grafted polymer brushes [18b]. For the optical properties of films, it is important that the average film roughness and uniformity is specified. Often, sampling is localized by the “spot” size, such that it is necessary to probe and average different areas of a sample. 10.2.2
Microscopy
Microscopy is very useful, especially in monitoring lateral morphologies, layer roughness, domains, or patterns. This includes atomic force microscopy (AFM), scanning electron microscopy (SEM), optical microscopy, and other surface probe microscopy methods. Surface-imaging techniques, known collectively as scanning probe microscopy (SPM), has been widely developed since the invention of the scanning tunneling microscope (STM) [39]. Each technique relies on a scanning probe “tip” positioned within a few nanometers above the surface of interest. Using a sensory feedback with the probe signal to create a three-dimensional map of “surface height”, the probe is scanned horizontally along a series of parallel lines, recording the height at
195
196
10 The Analysis and Characterization of Polymer Brushes
each point along the line. This is done until a square region of the sample has been measured resulting in a two-dimensional point-by-point height or energy profile of the sample, or z (x,y), analogous to a topographic map. However, probe signals that have been used to sense surfaces can include electron tunneling current, interatomic forces, photons, capacitive coupling, electrostatic force, magnetic force, and frictional force. While STM relies on a very sharp tip to tunnel current between the probe and conducting surface, the AFM probe tip is normally integrated into a microfabricated, thin film cantilever. Changes in the cantilever vertical position is usually monitored with an optical lever scheme. SPM has been used to investigate polymer brushes in a number of ways. This includes: 1) General mapping of topology or investigating morphologies [40]; 2) identifying features resulting from phase segregations [41]; 3) measuring the surface forces involved in different brush geometries [42]; 4) estimating the MW of brushes [43]; and 5) investigating patterned polymer brushes [19b]. SEM can be used for relatively thick films combined with microtoming and cryogenic techniques [44]. It is very useful for obtaining three-dimensional morphologies and characterization of features of these films. 10.2.3
Other Methods
The characterization methods are not limited to those mentioned above. It is conceivable that other surface-sensitive methods will be specifically developed to probe these systems. Thus, other methods have been utilized, if not routinely: 1.
2.
3.
4.
5.
Recently, investigators have increasingly used quartz crystal microbalance (QCM) methods to investigate the deposition process, especially in situ [45]. The value of in-situ adsorption monitoring methods is valuable in determining the rate functions of the process. Contact angle measurements or surface tensiometry allows the determination of surface energy or surface tension which is dependent on the hydrophobicity or hydrophilicity of surfaces [46]. This also provides information on differences in morphology and functional group distribution on surfaces. Electrochemical methods involve using the redox behavior of probes or the polymers themselves, and it is possible to utilize this technique to investigate permselectivity [47]. This method can also be used to probe any redox active species in the polymer films. The use of streaming potential measurements with ellipsometry has also been reported, and can possibly be applied to polyelectrolyte polymer brushes [48]. A very important technique is the use of a surface force apparatus (SFA) [49]. This is an instrument which is capable of measuring the surface forces directly between two molecularly smooth surfaces, for example, mica in vapors or liquids with a sensitivity of a few millidynes (10 nN) and a distance resolution of about 0.1 nm. These flat, smooth surfaces of mica can be cov-
10.2 Characterization of Ultrathin Polymer Films and Polymer Brushes Table 10.1
Summary of surface-sensitive spectroscopic, microscopic and optical techniques.
Technique A. Spectroscopy FT-IR (transmission, grazing incidence, IR-RAS, PM-IRRAS, etc.
Function
Probe chemical functional groups sensitive to vibrational spectroscopy Monitor changes from each stage of polymer brush formation Investigate orientation XPS (X-ray photoelectron Probe atomic species; presence, distribution, spectroscopy or ESCA abundance, i.e., surface elemental analysis Probe polymer thickness and presence of substrate surface UV-vis absorbance or Absorbance increase as a function of concentration fluorescence energy transfer mechanisms and as probes X-ray and neutron – investigate order and presence of amorphous or scattering techniques crystallite species (diffraction and – thickness, refractive index reflectometry) – substrate to film and film to subphase interaction – short-range and long-range ordering – diffusion kinetics and chain dynamics B. Optical Ellipsometry Investigate thickness and dielectric constants in-situ swelling experiments Surface plasmon Investigate thickness and dielectric constants resonance in-situ experiments roughness, absorption, in-situ environment changes Interferometry In-situ experiments Polymer brush regimes C. Microscopy SEM Investigate three-dimensional structures and contrast of materials Direct imaging and patterning AFM Surface morphology, phase segregation, ordering, roughness domains, crystallization, patterning Determine surface forces Optical microscopy Optical image and can also use epi-fluorescence microscopy D. Other Methods QCM Mass change, in-situ adsorption and kinetics Electrochemistry Redox activity, diffusion of ions (ion mobility), permeability Contact angle Surface energy measurements, differences in morphology, functional group distribution Wetting behavior Surface force apparatus Direct surface force measurement Changes in grafting density BAM Direct observation of morphology (optical image) based on reflection applicable with imaging ellipsometry Streaming potential Measurement of “charges” on the polymer
References
18a,b, 33, 34
15b, 18a, 37, 17
9b, 18c, 30, 31, 32
38, 46, 48, 54, 55 18a,37
35
44
18a, 40–43, 54 19
45 47 12–18, 46
49 51 48
197
198
10 The Analysis and Characterization of Polymer Brushes
6.
ered to obtain the force between different polymer brush materials. The force is measured by the gap distance difference given by a piezoelectric device and that measured directly by interferometry (attractive forces make the micas closer and repulsive forces try to move away the micas). Direct measurement of surface forces is also possible by AFM [50]. Brewster angle microscopy (BAM) is a technique that is sensitive to the surface density and to the anisotropy of phase domains in films, where the reflectivity of a planar interface between two media depends on the polarization of the incident light and on the angle of incidence [51]. The reflectivity of a real interface at the Brewster angle for the mentioned polarization has three origins: (i) the thickness of the interface; (ii) the roughness of real interfaces; and (iii) the anisotropy of films.
Other methods will definitely be reported over time and find unique utility in the characterization and analysis of polymer brushes. It should also be mentioned that computational and simulation methods are important “tools” for predicting and scaling the observed behavior in polymer brushes, and should go hand-in-hand with experimental results [52]. 10.3
Investigating Polymer Brush Systems 10.3.1
Characterization of the Step-by-Step Procedure
The SIP grafting of polymers involves a step-by-step procedure which begins with the preparation of substrates and ends with characterization of post-polymerized films (Figure 10.3) [18a]. Usually, the chosen substrate is also dependent on the applicability of various analysis methods. For example, Si wafers can be investigated by using ellipsometry, interferometry, AFM, transmission FT-IR, and XPS. However, for SPS, specular reflection FT-IR – and even electrochemistry – it is ideal to utilize Au-coated glass. Primarily, the substrate used is determined by the type of SAM technique which is used to tether initiators onto surfaces. In principle, the characterization protocol is typical for investigating SAMs at surfaces, but is extended towards macromolecular dimensions once a polymer is attached. The polymerization and post-polymerization characterization is equally important. Few methods are available for in-situ characterization during the polymerization itself. It is difficult to monitor the growth of polymer brushes in real time, due to the fact that the mechanism and kinetics of are not necessarily the same as in solution or bulk. The last step – post-polymerization analysis – is a stage where the characterization of terminated brushes can be carried out after several “washing” methods to isolate grafted polymers on surfaces. Any post-polymerization treatments such as cross-linking or functional group conversion of the brush can be examined at this stage. Overall, the step-by-step analysis is useful for characterizing the polymer brush formation and comparing the films “before” and “after” each stage of the grafting or treatment.
10.3 Investigating Polymer Brush Systems CH2
Au
HS-(CH2)11O CH2 n-BuLi -S -(CH2)11O Bu
styrene Li
-S-(CH2)11O
benzene Bu n
isoprene
Li
benzene
-S-(CH2)11O
Bu
PS
n
m
Li
-S-(CH2)11O benzene
PS
PI
The surface-initiated polymerization (SIP) grafting of polymers involves a stepby-step procedure which begins with the preparation of substrates and ends with characterization of post-polymerized films. Shown in
Figure 10.3
this schematic diagram is the step-by-step SIP procedure in anionic polymerization, including block copolymer formation. Note that the termination step is not shown.
10.3.2
Investigating the Different Regimes of Polymer Brush Conformation on Surfaces
The configurational space of the polymer chains is limited by the presence of an interface in polymer brushes. The deformation of densely tethered polymer chains reflects a balance between interaction and elastic free energies. Dense tethering of polymer chains on an interface enforces a strong overlap among the undeformed coils, and increases the polymer-to-polymer contacts and the corresponding interaction energy. The polymer chains are forced to stretch away along the direction normal to the grafting sites. Stretching lowers the interaction energy per chain, at the price of a high elastic free energy. The interplay of these two terms determines the equilibrium thickness and brush regimes of the layer. The most important and distinctive characteristic of polymer brushes is that the equilibrium thickness varies
199
200
10 The Analysis and Characterization of Polymer Brushes
The two limiting cases of a polymer brush regime, showing: (a) tethered chains having the critical grafting density s* = 1/pRe2 and (b) chains having r > r* and forming the stretched brush. Other types
Figure 10.4
of brush regime terminologies have been reported in the literature. In this case, a characteristic length in the uncompressed brush (part b) is given by l = r–1/2. (From Ref. [49b].)
linearly with the degree of polymerization. This is very different from the behavior of the free polymer chains in a theta solvent, where polymer chains possess an unperturbed configuration. Thus, densely tethered polymer chains can be deformed and result in a variety of “brush regimes”. Various terms have been utilized to describe these regimes, including “mushroom”, “pancakes”, “micelle”, and “dimples”. Research studies employing theory, scaling theories, simulation, and surface probe techniques have shown that the different regimes can result from solvent swelling, differences in MW, differences in grafting density as the tethered polymer chains change their conformation (Figure 10.4) [53]. 10.3.3
Investigating Phase Segregation and Formation of Patterns
Multicomponent polymer brushes have also been extensively studied [54]. The SCF theory has been used to examine the equilibrium properties of a binary polymer brush composed of immiscible chains under melt conditions. For two homopolymers with sufficiently high immiscibility, different ordered phases can be described (equivalent to lateral microphase separation), where the composition varies as a statistical mixture of the two components or as blocks. Recent results have shown that a number of interesting morphologies and mesophases are possible [17b,54b]. For example, it has been observed that if two components were sufficiently immiscible, lateral binary microphase separation can occur over a wide range of solvent conditions. The onset of phase separation can be delayed as solvent quality increased. Under poor solvent conditions, interesting structural variations as a result of the combination of phase separation from solvent and phase separation of the two components can be observed (Figure 10.5) [55]. By changing chain architecture, grafting density, whole chain length, relative chain length, interaction energy between different blocks and interaction energies between blocks and solvents, a variety of novel well-ordered structures have been predicted and observed. Indeed, studies have now been extended to ternary polymer systems and different graft architectures. The theoretical results indicate that tethered copolymer brushes on a flat substrate are an excellent candidate for forming nanopatterned polymer films. By varying the sequence distribution of tethered linear AB copolymers, brushes composed of block
10.3 Investigating Polymer Brush Systems
Phase segregation and formation of patterns in multicomponent polymer brushes can be observed by atomic force microscopy (AFM). In this case, glassy and rubbery binary components of grafted polymethacrylate (PMA) and fluorinated
Figure 10.5
polystyrene copolymer (PSF) were sensitively imaged and differentiated between topography (left), phase imaging (right) and glassy (top) and rubbery (bottom) states of the binary brushes. Dimensions at 5 < 5 lm. (From Ref. [54b].)
copolymers can show distinct lateral inhomogeneities, with large domains of A and B units. These predictions can be easily described in the following manner [56]: The interaction parameter between polymer-polymer, vAB, vBA and polymer-solvent, vAS, vBS plays an important role. For brushes in which polymer chains are tethered by the less soluble block, the copolymer chains associates into distinct structures, where the less soluble component can form the inner core and the more soluble component forms the outer layer to shield the former from the unfavorable solvent. Changes in the composition (fraction) obviously will result in a continuum of different phase-separated structures. Also, the polymer brush density profile can provide a picture of local concentration gradients in these mixed systems. 10.3.4
Polymerization Mechanism
Because of the vast number of available polymerization mechanisms, what is sometimes overlooked is the uniqueness of each of the different polymerization mecha-
201
202
10 The Analysis and Characterization of Polymer Brushes
nisms at interfaces [11–18]. Very good characterization methods allow for the monitoring of differences in initiator/monomer composition ratios, time of polymerization, solvent and temperature conditions. Investigating the initiation, propagation, termination in addition to the type of polymerization is important [24]. This includes the effectiveness of initiation, kinetics of monomer diffusion, growing polymer brush density (initiation efficiency), propagating reactive center (e.g., their lifetime, reactivity, and stability), widening polydispersity, and lastly the rate and mode of termination. It is possible that in-situ monitoring probes will afford the greatest contribution in this area in terms of answering some of the most important fundamental questions underlying these differences. Also, the fact that other polymerization mechanisms involving step-by-step condensation, ring-opening polymerization, or even metathesis methods, are widely known to have complex kinetics and thermodynamic requirements in order for polymerization to take place. The assumption in
Figure 10.6 a) Strategy for patterning of a polymer brush using a sacrificial photoresist layer and lithographic imaging. (From Ref. [19a].)
10.3 Investigating Polymer Brush Systems
Figure 10.6 (b) Strategy for patterning of a polymer brush nonlithographic patterning. (A) the AFM image of a patterned brush of PMMA formed by combination of microcontact printing and ATRP. The bright areas of the image correspond to brushes of PMMA, while the dark regions correspond to patterned areas of SAMs formed from HDT. (B) Cross-sectional profile of the patterned PMMA brush shown in (A). (C) Optical image of a patterned brush of PMMA after immersion into aqueous KI/I2 for 60 s. (From Ref. [19b].)
all these measurements is that the systems investigated are related to the classical or fundamental behavior of these polymerization methods as observed in bulk, or in solution. Using those assumptions as a starting point, it is possible to probe the unique behavior at interfaces.
203
204
10 The Analysis and Characterization of Polymer Brushes
10.3.5
Patterning Using Nonlithographic Methods
New and simple strategies to fabricate surface-confined patterns with lithographic and nonlithographic methods have been widely reported (Figure 10.6) [19,57]. Nonlithographic methods using microcontact printing [58] and dip-pen nanolithography (DPN) [59] have recently been shown to be popular. Patterning offers a number of advantages, including: (1) extrinsic, triggered control of interfacial properties at the micrometer or nanometer scale; (2) precisely localized presentation of chemical or topographical features; and (3) controlled surface densities (e.g., as required to achieve higher throughput, as in combinatorial methods) [60]. Various schemes have been reported where microcontact printing and even lithographic methods [61] can be used to prepare microscale patterns. Fabricating nanopatterns by SIP is an interesting goal. One key strategy in the nanopatterning approach is the use of SAM level of initiator self-assembly. In combination with an appropriate nanolithographic technique, such as DPN, this provides the foundation for the fabrication of future polymeric nanostructures.
10.4
The Importance of Characterizing Particles and Nanoparticles
At present, the preparation of polymer brushes grafted onto particles and even nanoparticles is by far the most widely studied system in polymer grafting methods [62]. The ease of preparation and analysis of such systems by simple gravimetric methods is one of the most common reasons. In addition, particles are readily available and their dispersion properties have been widely studied in industry. A relatively large number of reports have been made involving a host of polymerization mechanisms. Again, a major advantage of direct polymerization on particle substrates is that the polymers can then be degrafted and analyzed as normal polymers isolated from solution. In this way it is possible to determine the MW, polydispersity, polymer microstructure, composition, directly, whereas at present reliance must be placed on indirect methods in the case of polymer brushes prepared from flat surfaces. In addition, there is wide interest in much smaller “nanoparticle” systems as host for the polymerization process [63]. The synthesis, characterization, and development of new nanoparticle materials have both scientific and technological significance. Primarily through the quantum size effect, a number of these nanoparticle hosts have interesting electro-optical and magnetic properties [64]. SIP from particle surfaces involves the growth of end-tethered polymer brushes where the length or thickness can be more than twice the radius of gyration (Rg) compared to a free polymer in solution (Figure 10.7). Different mechanisms are possible with a variety of initiators, reaction conditions and monomers, where a continuum of properties may be observed ongoing, from flat surfaces to high surface to volume nanoparticles. Important differences between solution and bulk polymerization can be observed, where the nanoparticles with grafted initiators behave essentially as macroinitiators.
10.5 Characterization and Analysis Methods for Polymer Brushes on Particles
initiation
- reactive functional surface - coating with stable surfaces - size / geometry
polymerization
- controlled SAM initiator formation / coverage - controlled activation and initiation
- polymerizability - end-group reactivity - aggregation / stability
General scheme for surface-initiated polymerization (SIP) on a spherical colloidal particle, showing the attachment of an initiator and the growth of the polymer by SIP.
Figure 10.7
In turn, the development of these hybrid materials will allow the preparation of thermodynamically and kinetically stable nanocomposites and colloids. A number of polymerization mechanisms for nanoparticles have been reported. This includes: freeradical [65], cationic [66], TEMPO [67], anionic [68], ATRP [69], and metathesis [70]. Through the careful use of surface-sensitive spectroscopic and microscopic techniques, much has been gained from the direct and in-situ analysis of grafted polymers on the nanoparticles with regards to the kinetics and mechanism of the polymerization process. Parallels can be drawn to SIP on flat surfaces where surface-sensitive spectroscopic and microscopic measurements are complementary to analysis methods for colloidal particles. Thus, this part of the chapter surveys the different characterization methods and procedures employed when observing the formation of the core-shell type of hybrid inorganic-organic polymer brush systems.
10.5
Characterization and Analysis Methods for Polymer Brushes on Particles
Polymer brushes grafted onto particles can be analyzed in situ. Direct or in-situ methods allow the monitoring of differences in initiator/monomer composition ratios, the time of polymerization, and solvent and temperature conditions. Classical methods for analyzing polymer brush-particle systems includes gravimetric [71], thermal analysis [72], light scattering [73], NMR [74], zeta potential [75], and rheology [76]. Microscopy methods such as TEM, SEM, and AFM can also be employed, thereby providing direct visualization of core-shell composite architectures [77]. An interesting method for investigating polymer-particle dynamics using fluorescence correlation spectroscopy has recently been reported [78]. Once polymers have been detached from the substrate, they can be analyzed like any normal polymer product.
205
206
10 The Analysis and Characterization of Polymer Brushes
10.5.1
In-Situ Investigations on Particles
There are several important reasons for in-situ analysis of the polymers grafted onto particles. These include: monitoring the grafting process of initiator to particle surface; monitoring surface functional group conversion; investigating the polymerization mechanism (initiation, propagation, termination); investigating the formation of core-shell particles; and investigating the properties of a hybrid organic-inorganic particle or nanocomposites. Examples of properties that can be measured include grafting density, polymer shell thickness, viscosity change, swelling and contraction of shell, and polymerization from different particle geometries, sizes, and shapes. The nature of the particle substrate is also important. The analysis of these materials can be further complicated by the fact that different particle and nanoparticle substrates have varying dispersion properties. The particles are governed, for example, by size, shape, size distribution, surface charge, and hydrophilicity. Each must be handled properly such that the material is neither lost nor precipitated with the different polymerization methods. For example, when performing LASIP grafting on particles, a modified reaction vessel was utilized in order to prevent the particles from being removed from the reaction vessel under high vacuum [68]. The methods of analysis for polymer brushes on particles are categorized as follows: .
.
.
Gravimetric methods [71,79]: these can be used to monitor the changes in weight before and after each grafting procedure. Each modification and polymerization step adds mass and changes the volume of the particles. By carefully weighing the addition or removal of mass, one can determine the amount of initiator or polymer added with each step. Key aspects of this procedure include removal of “unattached” material and accurate and precise weighing procedures. The calculations of weight gain and “yield” are straightforward. Thermal analysis [68,72,80]: it is possible to monitor the changes in thermal stability, enthalpy, heat capacity, for example simply by performing various thermal analysis methods such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) [81]. TGA is used routinely to monitor the composition of the hybrid material as well as the decomposition kinetics and mechanism. It is even possible to monitor the changes in the viscoelastic properties of a material using methods such as dynamic mechanical analysis, coupled with other rheological measurements [82]. As the polymer is grafted to a particle versus simply mixed (blends), the changes in the thermal behavior will be evident. Light scattering [73,83]: in a light-scattering experiment, a light beam is sent to a temperature-controlled sample solution, which scatters the light in all directions due to the thermal fluctuations. In one case of a specific angle, a detector receives the scattered light. In dynamic light scattering (DLS), which is a quasi-elastic light-scattering experiment, a laser light beam is sent through an inhomogeneous sample. The inhomogeneities are formed by colloidal par-
10.5 Characterization and Analysis Methods for Polymer Brushes on Particles
.
.
.
.
.
ticles, micelles, hydrodynamic modes (acoustic modes), etc., which scatter light in all directions almost without changing the light frequency. The scattered light is received in a detector at a particular direction. If the intensity of light is measured as a function of the scattered direction, this is referred to as a static light-scattering experiment. The different directions for measuring the scattered light are measured by the scattering angle h, which is the angle between the incident beam defined by the laser ray and the scattered light. This angle defines the scattering vector q, which is related to the change in direction of the vector k of scattered light with respect to the incident beam. In this case, light-scattering measurements can be utilized to probe the change in size with the addition of the polymer “shell” brush and probe the hydrodynamic volume properties. NMR [74]: For monitoring the appearance and disappearance of specific resonance peaks (e.g., average polymer microstructure). This technique is primarily important for monitoring the structure of bound polymers on the particle. The absence of substrate effects or the “invisibility” of the particles during the NMR experiment is relevant. Some recent experiments have emphasized the importance of substrate-polymer interactions [84]. Zeta potential [75,85]: These measurements are primarily for determining changes in surface charges, surface charge density, changes in the dispersion properties, surface energy, stability, etc. [86]. This is particularly important in the analysis of polyelectrolyte polymer brushes bound onto particles. Rheology [76]: This is especially important for monitoring changes in melt or solution viscoelastic behavior. Viscosity is the measure of the internal friction of a fluid, and this friction becomes apparent when a layer of fluid is made to move in relation to another layer. The greater the friction, the greater the amount of force required to cause this movement, which is called “shear”. Shearing occurs whenever the fluid is physically moved or distributed, as in pouring, spreading, spraying, or mixing. Highly viscous fluids, therefore, require more force to move than less viscous materials. The presence of a polymer brush on the particle surface not only stabilizes their dispersion but also dramatically changes the viscoelastic behavior. Microscopy [65–70]: The use of microscopy has been reported throughout literature for highlighting the formation of a polymer shell and aggregation properties. Depending on the surface area and geometry of the particle, intercalation and delamination may also be present, for example as in layered silicate clay particles. Nanoscale versus mesoscale dispersion properties are especially observed, and TEM imaging has been particularly effective. It is important to have very good contrast between the particle and the polymer component. AFM studies have also been used to show changes in particle dimension and morphology. It will be interesting to see in the future how scanning near-field optical microscopy (SNOM) techniques can be used to probe specific particle-polymer interactions [87]. Bulk analysis of composite materials: Lastly, these hybrid inorganic particleorganic polymer composites or nanocomposites can be probed just like any
207
208
10 The Analysis and Characterization of Polymer Brushes
bulk polymer system for their physical and mechanical properties. Some of the engineering polymer-related testing methods include: tensile modulus, flexural strength, scratch resistance, viscoelastic behavior, barrier properties, melt processing, dimensional stability with temperature, etc., where structure-property relationships can be developed. This is important in comparing the properties of these material systems with simple blend materials. 10.5.2
Degrafted Polymers from Particles
The biggest advantage of direct formation of polymer brushes on particle materials is that the polymers can be degrafted and analyzed as normal polymers isolated from solution. There are two main methods that can be used to detach polymers from surfaces: 1. 2.
Direct cleavage of the polymer brush from the grafting point. Dissolution or destruction of the particle substrate.
The first method requires a careful design of the initiator such that the polymer, once formed, can be removed from the surface by a simple and effective “cleavage” reaction which does not cause polymer-analogous reactions on the formed polymer, and the yield of which is 100%. Functional groups such as esters are easily removed by acid or base hydrolysis. This means that the initiator must be designed such that the ester group is readily hydrolyzed after the polymer has been formed [11]. Other reactions involve nucleophilic attack or exchange “metathesis” reactions such that the polymer is removed through a more facile reaction. A key parameter is the ability of these reagents to go to the “root” of the polymer. An alternative method is to use a core substrate that can be readily decomposed. This means that inorganic reagents should be able to destroy the substrate without harming the polymers. In both instances, centrifugation, partition, and filtration methods are used to isolate the desired degrafted polymer from the rest of the unwanted constituents and residues. The isolated polymers should be of sufficient purity to apply spectroscopic and macromolecular methods for analyses, and should then be readily dissolved in solution. Once the polymer is readily isolated, one can determine the MW, MW distribution, polymer microstructure, composition, thermal analysis, etc. as typically applied to “normal” polymers [24]. In this manner, the polymer properties are determined directly, whereas reliance must be placed on indirect methods in the case of polymer brushes prepared from flat surfaces. Methods such as size-exclusion chromatography (SEC), light scattering, NMR, viscometry, and DSC can be utilized. Essentially, the same analytical techniques can be utilized to polymers that have been degrafted from flat substrate surfaces – the only difference is that it will take a very large area of flat substrate!
10.5 Characterization and Analysis Methods for Polymer Brushes on Particles
Summary
This chapter has highlighted the importance of using different analytical methods, and the need for several options of optical, spectroscopic, and microscopic methods. While new techniques are constantly being developed and utilized, the correlation of results between these different methods helps to paint a complete picture of polymer brush phenomena at any substrate geometry. Different polymerization mechanisms on flat and particle surfaces have been demonstrated. Comparison can be made to their solution or bulk polymerization counterparts, but this requires careful evaluation of the conditions that are specific at interfaces. Highly surface-sensitive techniques are necessary for in-situ analysis of the grafted polymers on surfaces, especially with regard to understanding the kinetics and the detailed polymerization mechanism. For particles, the most effective analysis methods – especially with molecular weight parameters and macromolecular characteristics – are to degraft the polymers in a post-polymerization analysis. The importance of analyzing the polymers in situ is related to increasing our understanding of colloidal and interfacial phenomena, and unique applications of composites. It is possible that with an increasing understanding of polymer brushes on surfaces, the observed properties between SIP on flat surfaces and particles will appear to be a continuum.
Acknowledgments
The production of this chapter would not have been possible without the support and encouragement from my wife, children, family, friends, colleagues, and the hard-working Advincula Research Group. Special thanks also to my coorganizers Bill Brittain, Ken Caster, and JOrgen ROhe for making this symposium possible.
209
210
10 The Analysis and Characterization of Polymer Brushes
References 1 S. T. Milner Science 1991, 251, 905. 2 (a) P. G. de Gennes, Macromolecules 1980, 13,
1069; (b) R. Cantor, Macromolecules 1981, 14, 1186; (c) R. R. Netz, M. Schick, Macromolecules 1998, 31, 5105; (d) A. Semenov, S. H. Anastasiadis Macromolecules 2000, 33, 613. 3 A. Halperin, M. Tirrell, T. P. Lodge, Adv. Polym. Sci. 1992, 100, 31. 4 M. Amiji, K. Park, J. Biomater. Sci. Polym. Ed. 1993, 4, 234. 5 J. F. Joanny, Langmuir 1992, 8, 989. 6 T. Tadros, The Effect of Polymers on Dispersion Properties, London: Academic Press, 1982. 7 R. Krishnamoorti, R. Vaia, Polymer Nanocomposites, ACS Symposium Series 804, Oxford University Press, North Carolina, 2002. 8 G. J. Fleer, M. A. Cohen-Stuart, J. M. H. M. Scheutjens, T. Cosgrove, B. Vincent, Polymers at Interfaces, Chapman & Hall: London, 1993. 9 (a) R. Jordan, K. Graf, H. Riegler, K. K. Unger, Chem. Commun. 1996, 9, 1025; (b) W. Zhao, G. Krausch, M. H. Rafailovich, J. Sokolov, Macromolecules 1994, 27, 2933. 10 A. Balazs, Y. Lyatskaya, Macromolecules 1998, 31, 6676. 11 O. PrOcker, J. ROhe, Langmuir 1998, 14, 6893. 12 B. Zhao, W. Brittain, Prog. Polym. Sci. 2000, 25, 677. 13 R. Jordan, A. Ulman, J. Am. Chem. Soc. 1998, 120, 243. 14 M. Weck, J. Jackiw, R. Rossi, P. Weiss, R. Grubbs, J. Am. Chem. Soc. 1999, 121, 4088. 15 (a) M. Ejaz, S. Yamamoto, K. Ohno, Y. Tsujii, T. Fukuda, Macromolecules 1998, 31, 5934; (b) X. Kong, T. Kawai, J. Abe, T. Iyoda, Macromolecules 2001, 34, 1837; (c) D. Jones, A. Brown, W. Huck, Langmuir 2002, 18, 1265. 16 M. Husseman, E. Malmstrom, M. McNamara, M. Mate, D. Mecereyes, G. Genoit, J. Hedrick, P. Mansky, E. Huang, T. Russell, C. Hawker, Macromolecules 1999, 32, 1424. 17 (a) Y. Tsujii, M. Ejaz, K. Sato, A. Goto, T. Fukuda, Macromolecules 2001, 34, 8872; (b) M. Baum, W. Brittain, Macromolecules 2002, 35, 610. 18 R. Advincula, Q. Zhou, M. Park, S. Wang, J. Mays, G. Sakellariou, S. Pispas, N. Hadji-
christidis, Langmuir, 2002, 18, 8672; (b) R. Jordan, A. Ulman, J. F. Kang, M. H. Rafailovich, J. Sokolov, J. Am. Chem. Soc. 1999, 121, 1016; (c) R. P. Quirk, R. T. Mathers, T. Cregger, M. D. Foster, Macromolecules 2002, 35, 9964. 19 M. Husemann, M. Morrison, D. Benoit, J. Frommer, M. Mate, W. Hinsberg, J. Hedrick, C. Hawker, J. Am. Chem. Soc. 2000, 122, 1844; (b) R. R. Shah, D. Merreceyes, M. Husemann, I. Rees, N. Abbott, C. J. Hawker, J. L. Hedrick, Macromolecules 2000, 33, 597. 20 (a) S. T. Milner, T. A. Witten, M. E. Cates, Macromolecules 1988, 21, 2610; (b) S. Minko, G. Gafijchuk, A. Sidorenko, S. Voronov, Macromolecules 1999, 32, 4525. 21 S. Alexander, J. Phys. 1977, 38, 977. 22 (a) L. Rockford, S. Mochrie, T. Russell, Macromolecules 2001, 34, 1487; (b) T. Russell, T. Thurn-Albrecht, M. Tuominen, E. Huang, C. Hawker, Macromolecular Symp. 2000, 159, 77; (c) L. Rockford, Y. Liu, P. Mansky, T. Russell, M. Yoon, S. Mochrie, J. Phys. Rev. Lett. 1999, 82, 2602; (d) E. B. Zhulina, A. C. Balazs, Macromolecules 1996, 29, 6338. 23 A. W. Adamson, A. P. Gast, Physical Chemistry of Surfaces, Wiley-VCH, 1997. 24 G. Odian, Principles of Polymerization, 3rd Edition, Wiley-VCH, 1991. 25 C. W. Frank, Organic Thin Films: Structure and Applications ACS Symp. Series 695, American Chemical Society, 1998. 26 (a) C. G. Willson, Introduction to Microlithography, 2nd Edn. (Eds. L. F. Thompson, C. G. Willson, M. J. Bowden) ACS, Washington, D.C., 1994, p. 139; (b) J. L. Wilbur, A. Kumar, H. Niebuyck, E. Kim, G. Whitesides, Nanotechnology 1996, 7, 452; (c) S. Clark, M. Montague, P. Hammond, Supramol. Sci. 1997, 4, 141. 27 G. Decher, J. D. Hong, Makromol. Chem. Macromol. Symp. 1991, 46, 321. 28 G. Roberts, Langmuir-Blodgett Films. Plenum Press: New York, 1990. 29 (a) J. Sagiv, J. Am. Chem. Soc. 1980, 102, 92; (b) A. Ulman, Organic Thin Films and Surfaces, San Diego, Academic Press: 1991. 30 R. Mendelsohn, J. W. Brauner, A. Gericke, Annu. Rev. Phys. Chem. 1995, 46, 305.
References 31 R. Levy, N. Koneripalli, M. Tirrell,
S. K. Satija, Macromolecules 1998, 31, 3731. 32 E. P. K. Currie, M. Wagemaker, M. A. Cohen Stuart, A. A. van Well, Physica B 2000, 283, 17, 21. 33 X. Kong, T. Kawai, J. Abe, T. Iyoda, Macromolecules 2001, 34, 1837. 34 (a) M. Kawaguchi, M. Kawarabayashi, N. Nagata, T. Kato, A. Yoshioka, A. Takahashi, Macromolecules 1988, 21,1059. 35 M. R. Munch, A. P. Gast Macromolecules 1990, 23, 2313. 36 C. Allain, D. Ausserr, F. Rondelez, Phys. Rev. Lett. 1981, 49, 1694. 37 X. Fan, C. Xia, T. Fulghum, M. K. Park, J. Locklin, R. C. Advincula, Langmuir 2003, 19, 916. 38 (a) J. Habicht, M. Schmidt, J. Ruehe, D. Johannsmann, Langmuir 1999, 15, 2460. 39 S. N. Magonov, M. Whangbo, Surface Analysis with STM and AFM: Experimental and Theoretical Aspects of Image Analysis. VCH: New York, 1996; (b) Scanning Probe Microscopy and Spectroscopy. Theory, Techniques, and Applications. 2nd Edn. (Ed. D. W. Bonnell, University of Pennsylvania). Wiley-VCH: New York, 2001. 40 (a) H. Iwata, I. Hirata, Y. Ikada, Langmuir 1997, 13, 3063; (b) X. Kong, T. Kawai, J. Abe, T. Iyoda, Macromolecules 2001, 34, 1837. 41 S. G. Boyes, W. J. Brittain, X. Weng, S. Z. D. Cheng, Macromolecules 2002, 35, 4960. 42 S. Yamamoto, Y. Tsujii, T. Fukuda, Macromolecules 2000, 33, 5995. 43 S. Al-Maawali, J. E. Bemis, B. B. Akhremitchev, R. Leecharoen, B. G. Janesko, G. C. Walker, J. Phys. Chem. B. 2001, 105, 3965. 44 A. Juang, O. A. Scherman, R. H. Grubbs, N. S. Lewis, Langmuir 2001, 17, 1321. 45 (a) M. Ivanchenko, H. Kobayashi, E. Kulik, N. Dobrova, Anal. Chim. Acta 1995, 314, 23; (b) K. A. Marx, Biomacromolecules 2003, 4, 1099. 46 D. Julthongpiput, Y. H. Lin, J. Teng, E. R. Zubarev, V. V. Tsukruk, Langmuir 2003, 19, 7832. 47 A. Anne, J. Moiroux, Macromolecules 1999, 32, 5829. 48 N. Houbenov, S. Minko, M. Stamm, Macromolecules 2003, 36, 5897. 49 (a) S. M. Kilbey, II, H. Watanabe, M. Tirrell, Macromolecules 2001, 34, 5249; (b) H. Wata-
nabe, S. M. Kilbey, II, M. Tirrell, Macromolecules 2000, 33, 9146. 50 T. W. Kelley, P. A. Schorr, K. D. Johnson, M. Tirrell, C. D. Frisbie, Macromolecules 1998, 31, 4297. 51 Y. Seo, K. Paeng, S. Park, Macromolecules 2001, 34, 8735. 52 (a) N. A. Spenley, Macromolecules 1998, 31, 4004; (b) Y. Lyatskaya, A. C. Balazs, Macromolecules 1997, 30, 7588. 53 T. Wu, K. Efimenko, P. Vlcek, V. Subr, J. Genzer, Macromolecules 2003, 36, 2448. 54 (a) I. Luzinov, D. Julthongpiput, V. V. Tsukruk, Macromolecules 2000, 33, 7629; (b) B. Zhao B, W. J. Brittain, J. Am. Chem. Soc. 1999, 121, 3557; (b) M. Lemieux, D. Usov, S. Minko, M. Stamm, H. Shulha, V. V. Tsukruk, Macromolecules 2003, 36, 7244. 55 A. Sidorenko, S. Minko, K. Schenk-Meuser, H. Duschner, M. Stamm, Langmuir 1999, 15, 8349. 56 (a) E. B. Zhulina, C. Singh, A. C. Balazs, Macromolecules 1996, 29, 6338; (b) E. B. Zhulina, A. C. Balazs, Macromolecules 1996, 29, 2667. 57 Y. Tsujii, M. Ejaz, S. Yamamoto, T. Fukuda, K. Shigeto, K. Mibu, T. Shinjo, Polymer 2002, 43, 3837. 58 Y. Xia, G. M. Whitesides, Angew. Chem. Int. Ed. Engl. 1998, 37, 550. 59 (a) S. Hong, C. Mirkin, Science 2000, 288, 1808; (b) S. Hong, C. Mirkin, Science 1999, 286, 523. 60 J. C. Meredith, A. P. Smith, A. Karim, E. J. Amis, Macromolecules 2000, 33, 9747. 61 G. Tovar, S. Paul, W. Knoll, O. Prucker, J. ROhe, Supramolec. Sci. 1995, 2, 89. 62 (a) N. Tsubokawa, Prog. Polym. Sci. 1992, 17, 417; (b) N. Tsubokawa, A. Kogure, Polym. J. 1993, 25, 83; (c) N. Tsubokawa, A. Kogure, J. Polym. Sci. Part A, Polym. Chem. 1991, 29, 697; (d) N. Tsubokawa, H. Ishida, Polym. J. 1992, 24, 809; (e) N. Tsubokawa, A. Kogure, K. Maruyama, Y. Sone, M. Shimomura, Polym. J. 1990, 22, 827. 63 R. Advincula, J. Dispers. Sci. Technol. 2003, 24, 343. 64 WTEC Proceedings, International Technology Institute, Baltimore, Maryland, 1998, pp. 1– 233. 65 O. Prucker, R. Ruhe, Macromolecules 1998, 31, 602.
211
212
10 The Analysis and Characterization of Polymer Brushes 66 R. Jordan, N. West, A. Ulman, Y.-M. Chou,
O. Nuyken, Macromolecules 2001, 34, 1606. 67 S. Yoshikawa, S. Machida, N. Tsubokawa, J. Polym. Sci. Poly. Chem. 1998, 36, 3165. 68 Q. Zhou, S. Wang, X. Fan, R. Advincula, J. Mays, Langmuir 2002, 18, 3324. 69 T. von Werne, T. E. Patten, J. Am. Chem. Soc. 1999, 121, 7409. 70 N. Y. Kim, N. L. Jeon, I. S. Choi, S. Takami, Y. Harada, K. R. Finnie, G. S. Girolami, R. G. Nuzzo, G. M. Whitesides, P. E. Laibinis, Macromolecules 2000, 33, 2793. 71 S. Hayashi, K. Fujiki, N. Tsubokawa, React. Funct. Polym. 2000, 46, 193. 72 M. Z. Rong, Q. L. Ji, M. Q. Zhang, K. Friedrich, Eur. Polym. J. 2002, 38, 1573. 73 T. von Werne, T. E. Patten, J. Am. Chem. Soc. 2001, 123, 7497–7505. 74 K. J. Watson, J. Zhu, S. T. Nguyen, C. A. Mirkin, J. Am. Chem. Soc. 1999, 121, 462. 75 A. De Sousa Delgado, M. Leonard, E. Dellacherie, Langmuir 2001, 17, 4386. 76 (a) A. N. Semenov, Langmuir, 1995, 11, 3560; (b) U. Raviv, R. Tadmor, J. Klein, J. Phys. Chem. B. 2001, 105, 8125. 77 (a) H. Mori, D. Chan Seng, M. Zhang, A. H. E. Mueller, Langmuir 2002, 18, 3682;
78 79 80 81 82
83 84
85
86 87
(b) K. Ohno, K. Koh, Y. Tsujii, T. Fukuda, Macromolecules 2002, 35, 8989; (c) S. C. Farmer, T. E. Patten, Chem. Mater. 2001, 13, 3920. J. J. Zhao, S. C. Bae, F. Xie, S. Granick, Macromolecules 2001, 34, 3123. J. I. Amalvy, M. J. Percy, S. P. Armes, H. Wiese, Langmuir 2001, 17, 4770. E. Tadd, A. Zeno, M. Zubris, N. Dan, R. Tannenbaum, Macromolecules 2003, 36, 6497. K.-M. Kim, D.-K. Keum, Y. Chujo, Macromolecules 2003, 36, 867. J. Ren, B. F. Casanueva, C. A. Mitchell, R. Krishnamoorti, Macromolecules 2003, 36, 4188. W. L. Yu, M. Borkovec, J. Phys. Chem. B. 2002, 106, 13106. G. K. Agarwal, J. J. Titman, M. J. Percy, S. P. Armes, J. Phys. Chem. B. 2003, 107, 12497. M. J. Percy, V. Michailidou, S. P. Armes, C. Perruchot, J. F. Watts, S. J. Greaves, Langmuir 2003, 19, 2072. M. R. Gittings, D. A. Saville, Langmuir 2000, 16, 6416. R. C. Dunn, Chem. Rev. 1999, 99, 2891.
213
11
Characterization of Polymer Brushes on Nanoparticle Surfaces Thomas A. P. Seery, Mark Jordi, Rosette Guino, and Dale Huber
Abstract
Polymer brushes have been prepared through metal-mediated, surface-initiated polymerization (SIP) from gold and silica nanoparticles such that all parameters of the resulting nanocomposite material are under synthetic control. Gold and silica nanoparticles provide unique model systems for testing theories of polymer brush synthesis in confined geometries, and are also useful for screening chemical variations for SIP schemes. Specifically, titanium alkoxide-mediated polymerizations of polyhexylisocyanates were performed from gold nanoparticles that were stabilized with mixed layers of thiols containing terminal hydroxyls, and ruthenium alkylidenes were bound to norbornene functionalized Stober silica for the ring-opening metathesis polymerization of norbornene monomers. These two different nanoparticle/ polymer brush systems were analyzed for brush thickness, polymer molecular weight, and particle size. Detailed information on initiation efficiency and on the density of chain attachment points will ultimately lead to future refinements in preparation of polymer brushes using the “grafting from” or SIP approach.
11.1
Introduction
The recent interest in surface-grown polymer brushes can be seen in the large increase in the number of different polymers grown from an ever-increasing variety of surfaces [1–13]. Although most studies have been performed on planar surfaces, there is also significant interest in brushes grown from nanoparticle substrates. Patten and coworkers [14] have prepared polystyrenes using controlled radical methods from silica, CdS, and germanium spheres. While controlled radical methods are currently the predominant approach for surface-initiated polymerizations [15,16], metal-mediated polymerizations provide an alternate approach to preparing surfacebound polymer layers. There are examples of ring-opening metathesis polymerization (ROMP) being initiated from tethered alkylidenes on planar and particle surfaces [17–23]. The first realization of metal-mediated polymerizations on a nanopar-
214
11 Characterization of Polymer Brushes on Nanoparticle Surfaces
A) Nanoparticle substrates are synthesized; B) a stabilizing layer is formed on the surface and seeded with initiators; C) initiators are activated for polymerization; D) a nanocomposite results from polymer growth.
Scheme 11.1
ticle substrate was the preparation of polyhexylisocyanates from thiol-stabilized gold nanoparticles surfaces using tethered titanium alkoxides [11,24,25]. The bulk of this research is directed at attaining new materials with highly controlled compositions and the widest possible range of material properties. The diversity of polymerization mechanisms available for the “grafting from” or “surface-initiated” approach (shown in Scheme 11.1) allows access to a wide range of polymer brushes, and each approach has strengths as regards monomer selection, ease of synthesis, polydispersity, and attainable molecular weights as well as the chemical and physical properties of the target brushes. This wide range of polymerizations also comes with a spectrum of initiating moieties that must be coupled to the substrate for the polymerization to occur. The large surface area of nanoparticles provides an appealing laboratory for the production and study of polymer brushes grown from those surfaces [11,23–28]. Two logical starting points for detailed studies of polymer brush synthesis from nanoparticles are formation of coupling agent layers using thiols on gold and silanes on silica. Due to the wealth of pre-existing literature on the synthesis of nanoscale gold and silica particles, one might expect that the major difficulties in utilizing either system for this purpose had been overcome. Unfortunately, several tools appropriate to the characterization of polymer brushes on gold nanoparticles are ineffective for silica nanoparticles, and vice versa. The synthesis of polymer brushes from initiators tethered on nanoparticle surfaces provides a large number of parameters that can potentially be varied in the production of particle-based nanocomposites: substrate chemistry, particle size, tether length and spacing, polymerization chemistry, polymer composition and chain length. In addition, each of these may be polydisperse in nature so that exerting control over the structure of the final product may be a complex task. The need for a detailed understanding of polymer growth from surfaces is underlined by efforts in our laboratory [20,23,25,28] that have shown that the rate of initiation is sensitive to the structure of the tethered initiator layer when polymerizations are initiated from particle surfaces. The results of this range from broadened molecular
11.2 Experimental
weight distributions to no polymerization at all. The critical variables appear to be the surface density of initiator groups and the steric access at the point of initiation.
11.2
Experimental 11.2.1
Materials
All reagents and solvents were purchased from either Acros Organics or Aldrich Chemical Co., and used without further purification except as noted. Triethylamine (99%) was distilled over CaH2 and stored under N2. Ethyl vinyl ether (99%) and norbornylene (99%) were purified by vacuum transfer and stored under nitrogen at 4 IC. Tetrahydrofuran (THF) (99%) and methanol (absolute) were purchased from J. T. Baker, Inc. THF was freshly distilled over sodium before each use and stored under nitrogen. Silanes such as 5-(Bicycloheptenyl)-triethoxysilane (BCH) and trimethylethoxysilane (TMEOS) were purchased from Gelest Inc., with the exception of 5-norbornen-2-yl(ethyl)chlorodimethylsilane (NCS), which was from Aldrich Chemical Co. Bis(tricyclohexylphosphine) benzylidine ruthenium(IV) dichloride (Grubbs catalyst) was purchased from Strem Chemicals. Ethyl alcohol (dehydrated, 200 proof) was purchased from Pharmco Products Inc., and ammonium hydroxide (28–30 wt%) and hydrofluoric acid (48–50 wt%) were purchased from Fisher Scientific. Ethyl alcohol used in the synthesis of 5-norbornen-2-yl(ethyl)ethoxydimethylsilane (NCSEOS) was dried using Na and stored under nitrogen. Caution: the presence of a large amount of water in ethanol can be dangerous when Na is added. Titanium tetrachloride was distilled under a reduced pressure of nitrogen from copper turnings, and hexyl isocyanate was distilled from calcium hydride under reduced pressure and then degassed. All dry reagents were maintained water and oxygen free by storage under dry nitrogen after their purification. 11.2.2
Instrumentation
Proton NMR spectra were collected on a Bruker DMX 500 FT-NMR spectrometer using standard solution NMR techniques. Deuterated chloroform was used as the solvent, and shifts are referenced to the chloroform residual, defined as 7.27 ppm. Infrared spectrometry (IR) was conducted using a Nicolet-560 Magna-IR spectrometer to characterize the chemical composition of the sample before and after polymerization. Samples were analyzed on KBr disks or as KBr pellets in transmission mode. Nanoparticle samples were prepared for analysis by drying under vacuum after purification. Transmission electron micrographs (TEM) were obtained using a Philips 400 transmission electron microscope. Samples were prepared by deposition onto a car-
215
216
11 Characterization of Polymer Brushes on Nanoparticle Surfaces
bon-coated grid and conducted at several dilutions to insure the reproducibility of the sample morphology. Dynamic light scattering (DLS) measurements were performed with a Brookhaven Instruments BI9000 correlator and a BI200SM goniometer with a 514-nm laser source. Data were acquired at a 90I angle with a 500 mW light intensity. Solution concentrations ranged from ~30 mg mL–1 to 1 mg mL–1, the point at which further dilution did not yield a change in observed radius. Thermogravimetric analyses were obtained on a Perkin-Elmer TGA 7 using Pyris software and a Perkin-Elmer TAC 7/DX thermal analysis controller for data acquisition. Scans were conducted from 50 to 950 IC under nitrogen at a rate of 15 IC per minute. Gel-permeation chromatography (GPC) data were collected using a Waters 150-C ALC/GPC with Millenium software coupled with a PL-ELS 100 and a Waters 2487 Dual k absorbance detector. Samples were analyzed in THF at 35 IC on four 25 cm N 10 mm poly(divinylbenzene) columns (Jordi Assoc. FLP; pore size = 100–105 Q) and calibrations were based on 11 polystyrene standards (Polymer Standard Services = 106–2 000 000; Mw/Mn = 1.0–1.11). 11.2.3
Pyrolysis GC-MS
Samples were analyzed using an HP 6890 series Mass Selective Detector coupled to a HP 6890 series gas chromatograph in conjunction with a pyrolysis sampling device designed at the University of Connecticut. A pyrolysis temperature of 400 IC was used to decompose the samples. The injection port was heated to 300 IC and a temperature program from 35 to 325 IC at 15 IC/min was used to elute sample fragments. HP chem-station software was used for spectral analysis. 11.2.4
Infrared Monitoring of Polymer Formation
A quantity of gold nanoparticles synthesized as described below were freshly freezedried from benzene, placed in a vial, and sealed with a rubber septum. An inert atmosphere was established, and ca. 2 mL of titanium tetrachloride was vacuumtransferred into the vial. The titanium tetrachloride solution was stirred for 15 min, and then dried under vacuum. When the particles were fully dry (<10–2 torr vapor pressure), the vials were taken into a glove box with a dry, oxygen-free nitrogen atmosphere. The septum was removed and 3.0 mL of dry, degassed toluene was added and stirred for 10 min to fully dissolve the particles. An aliquot (1.0 mL) of dry, degassed hexyl isocyanate was added to a stirred solution of nanoparticles, and a timer started. The solution was stirred for 10 min, and then a glass and PTFE syringe was used to withdraw an aliquot of the solution and inject it into a liquid IR sample cell. The cell consisted of two sodium chloride windows, separated by a 15 lm-thick PTFE spacer, with a solution inlet and outlet. After the solution had been injected, the inlet and outlet were sealed with PTFE plugs, and the cell removed from the glove box and taken to the infrared spectrometer.
11.2 Experimental
The IR spectra were collected using a Nicolet Magna-IR 560 FT-IR spectrometer, with a sample shuttle. A macro language allowed automation of the sampling, and was programmed to record spectra at 90-s intervals. During the experiment, the sample shuttle translated the sample out of the beam-path to collect background spectra, and then back into the beam-path for sample spectra. With this arrangement, fresh background spectra were collected for each sample spectrum to account for background drift during the sampling. The sampling was continued uninterrupted for an extended period, typically 72 h. Following collection of the spectra, the Nicolet Omnic software package was used to automatically quantify the area and peak height of the isocyanate peak at 2275 cm–1, with the baseline defined as the line drawn from the values at 2000 to 2500 cm–1. 11.2.5
Synthesis of Alkanethiol-Stabilized Gold Nanoparticles
The gold nanoparticles used above were synthesized utilizing a modification of the two-phase synthesis published by Brust and coworkers [29]. An aqueous solution of hydrogen tetrachloroaurate (30 mL, 0.030 M) was stirred with a toluene solution containing tetraoctylammonium bromide (80 mL, 0.050 M), a phase-transfer agent. After several minutes complete transfer of the Au(III) to the toluene phase was indicated by the deep red color, and a lack of color in the aqueous phase. The alkanethiols, 1-dodecanethiol and 12-hydroxy-1-dodecanethiol (136 mg and 37 mg respectively, a 4:1 molar ratio) were dissolved in a minimum of toluene (ca. 5 mL) and added to the reaction. A freshly prepared aqueous solution of sodium borohydride (25 mL, 0.40 M) was added drop-wise with vigorous stirring. The toluene phase quickly darkened, signaling the reduction of the gold salt to Au(0). The two-phase reaction was stirred for 3 h, and the organic phase then decanted. Approximately 90% of the toluene was evaporated, and the product precipitated in methanol. The precipitate was collected on a nylon filter, redissolved in a minimum of toluene (~1 mL), and reprecipitated in methanol. The product was a dark, dense, waxy solid. The purified product was dissolved in 50 mL of benzene and freeze-dried to remove any remaining solvent. In order to remove the polymer chains from the gold particles, a toluene solution of polymer-coated gold particles (e.g., 100 mg in 5 mL toluene) was stirred with addition of a dilute (~0.1 M) ethanol solution of KCN. The ethanolic cyanide solution was added until the dissolution of the gold cores by the cyanide ions could be observed by the disappearance of the deep purple color that is characteristic of the gold nanoparticles. The toluene solution was extracted five to six times with water to remove all ionic species, after which the polymer was precipitated from the toluene solution in methanol. The cleaved polymer samples had identical IR and NMR spectra to homopolymer prepared using standard methods.
217
218
11 Characterization of Polymer Brushes on Nanoparticle Surfaces
11.2.6
Synthesis of Stober Silica Nanoparticles
Nanoparticles ranging in diameter from 15 to 30 nm were prepared using a method similar to that reported by Stober et al. [30]. As a representative example, absolute ethanol (1.0 L) and ammonium hydroxide (0.481 mol, 32.5 mL) were added to a 1.0L Erlenmeyer flask with vigorous stirring. TEOS (0.134 mol, 32.32 mL) was then added rapidly and the solution was allowed to stir for 12 h. Dynamic light scattering and TEM were used to obtain radii for these particles in the range of 15 to 100 nm, while IR and TGA confirmed the composition of these particles to be primarily silica with some (<3 wt%) residual alkoxide. 11.2.7
Synthesis of NCSEOS
Dry ethanol (20.0 mL), 5-norbornen-2-yl(ethyl)chlorodimethylsilane (5.0 mL), and triethylamine (3.25 mL) were added by syringe to an oven-dried Schlenk reaction flask equipped with a septum. The mixture was stirred for 12 h at 25 IC, during which time a white precipitate formed. The solution was then cooled in an ice-bath, filtered, and excess ethanol removed by distillation to give a brown liquid which was further purified by vacuum transfer at 30 mtorr. The purified product was a clear liquid (~4 mL). FT-IR m = 3059, 2966, 2868, 1448, 1389, 1338, 1250, 1167, 1109, 1082, 947, 831, 779, 717; GC-MS MI = 224. 11.2.8
Synthesis of BCH, NCSEOS, and TMEOS-Coated Nanoparticles
This procedure is an adaptation of that detailed by van Blaaderen et al. [31]. A representative example for fully coated particles is as follows. To a 250-mL, round-bottomed flask equipped with a condenser and a magnetic stirring bar was added 200 mL of the Stober silica nanoparticle solution (0.010 g mL–1) prepared as above, followed by BCH (1.77 N 10–2 mol, 4.36 mL). The solution was stirred for 12 h in a 70 IC constant temperature oil bath. The temperature was then increased to 110 IC and 140 mL of solution was removed using a distilling adapter. Purification of the resulting material was conducted by precipitation in hexane, followed by centrifugation and resuspension in THF. This process was repeated a total of five times, after which the product was re-characterized by DLS for constant size (Rh = 20 nm), IR m = 1091, 2850 demonstrated the presence of Si-O and C-H; PY-GC-MS had Mw = 66 for a cyclopentadiene fragment that is characteristic of norbornene fragmenting from the surface, a TGA shift in weight loss to higher temperature from 0– 150 IC for uncoated to 150–250 IC for coated, and TEM individual nonaggregated particles consistent with the DLS data. A representative example of a controlled initiator density coating is as follows. To a 100-mL, round-bottomed flask equipped with a condenser and a magnetic stirring bar was added 200 mL of the silica nanoparticle solution described above
11.2 Experimental
(c = 0.01 g mL–1) followed by TMEOS (2.67 N 10–3 mol, 42 lL). The solution was then stirred for 12 h in a 70 IC constant temperature oil bath. The temperature was then increased to 110 IC, and 40 mL of solvent was removed using a distilling adapter. The product was allowed to cool to 70 IC, after which NCSEOS was added (1.31 N 10–2 mol, 300 lL) with stirring and the mixture was allowed to stand for 12 h. A second distillation was then conducted at 110 IC, and 20 mL of solution was removed. The product was then cooled to 25 IC. Purification of the resulting material was conducted by precipitation in hexane, followed by centrifugation and resuspension in THF. This process was repeated a total of five times. The product was then characterized by DLS and showed a constant radius (20 nm), IR, m = 1091, 2850, demonstrated the presence of Si-O and C-H; PY-GC-MS had the cyclopentadiene marker, and TEM showed nonaggregated particles. 11.2.9
Synthesis of TMEOS Silica-Polymer Mixture
A 25-mL Schlenk flask was charged with a purified THF nanoparticle dispersion (0.151 g of nanoparticles in 4.0 mL THF). This solution was then evacuated and processed through three freeze-pump-thaw cycles before transfer to a glovebox. The solution was then transferred to a scintillation vial containing Grubbs catalyst (1.21 N 10–5 mol, 0.010 g) and stirred for 3 min. Norbornene was then added (1.2 N 10–3 mol, 0.1144 g), and the solution was allowed to stir for 1 h before the addition of ethyl vinyl ether (0.01 mol, 1 mL). The sample was then analyzed by DLS: diameter = 27.2 nm; TEM, GPC Mw = 20298, PDI = 1.09. 11.2.10
Synthesis of Silica-Poly(norbornene) Nanocomposites
A representative example is as follows. A 25-mL Schlenk flask was charged with a purified THF nanoparticle dispersion (0.302 g of nanoparticles in 8.0 mL THF). This solution was then evacuated and processed through three freeze-pump-thaw cycles before transfer to a glovebox. The solution was then transferred to a scintillation vial containing Grubbs catalyst (3.29 N 10–5 mol, 0.0271 g) and stirred for 3 min. Four precipitation/centrifugation steps were then conducted as previously described, using a sealed centrifugation vial and degassed solvents. The precipitate was then dispersed in degassed THF (22 mL), and this solution was transferred onto norbornylene (3.2 N 10–2 mol, 3.0 g). The solution was then separated into six portions (3.5 mL each) and ethyl vinyl ether (3.0 N 10–3 mol, 0.3 mL) was added to one vial at each of the following times: 2, 15, 30, 60, 90, and 120 min. The samples were then dried under vacuum and the resulting products weighed as 15.2, 49.9, 51.6, 64.2, 60.2, and 72.5 mg, respectively. The resulting material was characterized by TEM to confirm attachment of the polymer layer to the surface and to check particle aggregation state; by DLS to determine composite sizes of 60–350 nm, and by TGA to determine percentage organic as 30–70%. NMR showed the characteristic peaks for polynorbornene, 1H NMR (500 MHz, CDCl3) d5.35 (bs, 2H, olefin trans),
219
220
11 Characterization of Polymer Brushes on Nanoparticle Surfaces
5.19 (bd, 2H, olefin cis), 2.76 (bs, 2H, CH of cyclopentane cis), 2.40 (bs, 2H, CH of cyclopentane trans), 1.85 (bm, 1H, CH2 of cyclopentane), 1.75 (bs, 2H, CH2 of cyclopentane), 1.34 (bs, 2H, CH2 of cyclopentane), 1.04 (bm, 1H, CH2 of cyclopentane) ppm, and IR large increase in alkane region, double bond peak, and silica peak (2948, 2862 alkane), (964 double bond), and (1091 silica). 11.2.11
Isolation of Grafted Polymer Chains
To six 100-mL plastic beakers was added 15.2, 44.9, 46.6, 59.2, 55.5, and 67.5 mg of the dried composite sample for 2, 15, 30, 60, 90, and 120 min, respectively. This was followed by deionized water (20 mL) and hydrofluoric acid (20 mL) to dissolve the silica cores of the nanocomposites. These samples were stirred for 24 h. The white polymer chips were then removed with tweezers, placed on a nylon filter and washed with three portions of deionized water (25 mL) and two portions of methanol (15 mL). Drying under vacuum and weighing resulted in 7.5, 9.2, 7.3, 12.1, 25.7, and 24.0 mg of sample, respectively. The samples were then analyzed by FT-IR to confirm the absence of the silica peak (m = 1091) and presence of alkane peaks (m = 2948, 2861, 964) the same as pure poly(norbornene), TGA to confirm the absence of silica (100% weight loss), and GPC (to determine molecular weight; see Figure 11.7 for values). 11.2.12
Polymer Stability Test
In order to insure that poly(norbornene) does not degrade during the HF treatment used above, an independently synthesized portion of the pure poly(norbornene) (0.260 g) was subjected to the following treatment with HF. The sample was added to a plastic 100-mL beaker and covered with deionized water (20 mL) and hydrofluoric acid (20 mL). The sample was then stirred for 24 h before being placed on a nylon filter. The sample was then washed with three aliquots of deionized water (25 mL) and two aliquots of methanol (15 mL) before being dried under vacuum. The weight of the resulting product was 0.213 g. 1H NMR (500 MHz, CDCl3) d5.35 (bs, 2H, olefin trans), 5.19 (bd, 2H, olefin cis), 2.76 (bs, 2H, CH of cyclopentane cis), 2.40 (bs, 2H, CH of cyclopentane trans), 1.85 (bm, 1H, CH2 of cyclopentane), 1.75 (bs, 2H, CH2 of cyclopentane), 1.34 (bs, 2H, CH2 of cyclopentane), 1.04 (bm, 1H, CH2 of cyclopentane) ppm; FT-IR m = 2943, 2864, 1446, 964, 746 cm–1; GPC Mn = 11 N 103 g mol–1 before treatment and 12 N 103 g mol–1 after treatment, PDI changed from 1.33 to 1.46; TGA inflection point 475 IC, wt% = 98.8.
11.3 Results and Discussion
11.3
Results and Discussion
Our first system of interest is thiol-stabilized gold nanoparticles that have tethered hydroxyl ligands for initiating the polymerization of hexylisocyanate via a titanium alkoxide species. The gold nanoparticles were prepared using the methods of Brust and coworkers [29,32], with thiol stabilizing layers comprising hydroxyl and methyl terminated thiols. After the hydroxyls are transformed into titanium alkoxides, hexylisocyanate can be added and a polyhexylisocyanate-gold nanocomposite results. There are several parameters to be determined in this procedure: nanoparticle radius, hydroxyl concentration, polymer chain length, yield for the formation of titanium alkoxide species, initiation efficiency, and physical characteristics of the ultimate nanocomposite material. The radius of the initiator particles can be observed using TEM, but the dispersity of the particles should be assessed by techniques that sample a larger ensemble. Gold nanoparticle sizes have been studied previously using liquid chromatography techniques [33]. Unfortunately, the chemical stability of the gold thiol bond is not great and, in solution, the particles can aggregate over time in the absence of excess thiol. They are also highly colored, and thus there is the potential to damage separatory columns by increasing background signal intensity. The plasmon absorption of gold nanoparticles also makes them unstable to intense visible radiation, so that light-scattering studies are difficult. With these complications in mind, we turned to thermogravimetric analysis as a means to measure the total surface area in a sample of our thiol-stabilized nanoparticles. We made the assumptions that each gold thiol bond required the same surface area, and that all particles were spherical. Then, by calculating a suitable average molecular weight for mixed thiol layers the fraction of organic material observed using TGA could be uniquely related to a particle radius. The particles were quite stable over time when dried, and could be redissolved in common organic solvents for synthetic manipulations. The nanoparticles in the solution state could be handled much as any other organic reagent, and we were able to characterize the chemical nature of our substrates using standard methods of the organic chemist such as NMR and IR. Proton NMR was particularly valuable as we were able to determine the initiator concentration on the particle surfaces from the ratio of methyl protons to the methylenes on the hydroxyl termini. The interior methylene protons are increasingly conformationally restricted in their relaxation times as they are located closer to the particle surface and thus the integrals for these are not reliable. However, the terminal carbons have similar dynamics and thus have comparable integrals. This can be seen in Figure 11.1, where the NMR spectrum of a mixture of thiols is compared to the spectrum of a nanoparticle with a mixed thiol layer – the free thiols have sharper peaks. Once the particle size and initiator concentration were established, the particles were carried forward using the hydroxyl groups to initiate chain growth polymerization of hexylisocyanate via a titanium-mediated scheme [34]. The polymerization of the hexylisocyanate was followed using FT-IR in situ to continuously monitor the reaction progress. As seen in Figure 11.2, the isocyanate resonance near 2200 cm–1
221
222
11 Characterization of Polymer Brushes on Nanoparticle Surfaces
Upper spectrum: NMR of a 9:1 mixture of decane thiol and 11-hydroxyl undecane thiol. Lower spectrum: NMR of gold nanoparticle synthesized using the same mixture.
Figure 11.1
11.3 Results and Discussion
2.0
B
Absorbance
1.5 C
A
1.0
0.5
0.0 3500
3000
2500
2000
1500
1000
-1
Wavenumbers (cm ) Series of infrared spectra taken during a polymerization run of titanium alkoxide functional gold nanoparticles in a 3:1 solution of toluene:hexylisocyanate.
Figure 11.2
decreases steadily, while the amide peak at 1700 cm–1 increases. This technique is particularly effective for this polymerization because the relevant peaks appear in uncluttered regions of the spectrum. The aromatic C-H stretching of the toluene solvent above 3000 cm–1 provides an internal calibration. The only significant limita3.5
(Ao-Aeq)/(A-Aeq)
3 2.5 2 1.5 1 0.5 0