On the COver . . . The photo on the front cover shows melting water streaming from an iceberg that broke off from a glacier in Disco Bay, Greenland. As the ice melts, you might hear a sizzling sound from popping bubbles of air that became trapped and compressed in the ice. It is a natural process for ice to break off a snow-formed glacier or ice shelf, forming icebergs that melt. After calving, or breaking off, icebergs are pushed by wind or currents, moving up to 17 km (about 10 mi) a day, eventually melting completely. Icebergs are made of freshwater ice since they originally formed from compacted snow. The ice often has a white or ÒWindex¨-blueÓ color, depending on the amount of compaction and the amount of included air. Since it is made of freshwater, glacial ice is less dense than seawater. As a result, the iceberg you see ßoating above the sea surface is about a tenth of the entire iceberg. Icebergs can range in size from a height above the sea surface of less than 1 m (about 3 ft), called a growler, to 75m (240 ft) above the sea surface. Large icebergs have been tracked and reported since the time the Titanic struck an iceberg and sank in 1912. Today, icebergs are tracked by satellites, radar, and visual sightings. There has been some discussion about towing large icebergs to shore for use as a source of fresh water, but this has not yet been attempted.
LabOratOry ManuaL The Laboratory Manual to accompany Physical Science, written by the author of the text, presents a selection of laboratory exercises speciÞcally written for the interest and abilities of non-science majors. The Laboratory Manual features. . . ¥ Invitations to Inquiry, which provide opportunities for critical thinking ¥ Laboratory exercises designed for a more structured learning environment that require measurement and data analysis ¥ Alternative, open-ended exercises ¥ Custom publishing options, which allow the manual to be tailored to course needs
McGraw-hiLLÕs arisÑassessment, review, and instruction system www.mhhe.com/tillery McGraw-HillÕs ARIS for Physical Science is a complete electronic homework and course management system designed for greater ease of use than any other system available. ARIS enables instructors to create and share course materials and assignments with colleagues with a few clicks of the mouse. Instructors can edit questions and algorithms, import their own content, create announcements, and post due dates for assignments. ARIS has automatic grading and reporting of easy-to-assign, algorithmically-generated homework, quizzing, and testing. Once a student is registered in the course, all student activity within McGraw-HillÕs ARIS is automatically recorded and available to the instructor through a fully integrated grade book that can be downloaded to Excel¨.
Md. Dalim #977442 8/1/08 Cyan Mag Yelo Black
When the Laboratory Manual is used with the Physical Science textbook, students will have an opportunity to master basic scientiÞc principles and concepts, understand the nature of scientiÞc inquiry from a hands-on perspective, and learn new problem-solving and thinking skills. An InstructorÕs Edition Laboratory Manual is also available on the Physical Science ARIS site.
tiL04527_fm_i-xx.indd Page i 8/7/08 5:47:55 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
PHYSICALSCIENCE
tiL04527_fm_i-xx.indd Page ii 8/7/08 5:47:57 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
tiL04527_fm_i-xx.indd Page iii 8/7/08 5:47:57 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
EIGHTH EDITION
PHYSICALSCIENCE BILL W. TILLERY ARIZONA STATE UNIVERSITY
tiL04527_fm_i-xx.indd Page iv 8/7/08 5:47:58 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
PHYSICAL SCIENCE, EIGHTH EDITION
Published by McGraw-Hill, a business unit of The McGraw-Hill Companies, Inc., 1221 Avenue of the Americas, New York, NY 10020. Copyright © 2009 by The McGraw-Hill Companies, Inc. All rights reserved. Previous editions © 2007, 2005, 2002, 1999, 1995, and 1993. No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written consent of The McGraw-Hill Companies, Inc., including, but not limited to, in any network or other electronic storage or transmission, or broadcast for distance learning. Some ancillaries, including electronic and print components, may not be available to customers outside the United States. This book is printed on recycled, acid-free paper containing 10% postconsumer waste.
1 2 3 4 5 6 7 8 9 0 QPD/QPD 0 9 8 ISBN 978–0–07–340452–3 MHID 0–07–340452–7
Publisher: Thomas Timp Sponsoring Editor: Debra B. Hash Director of Development: Kristine Tibbetts Senior Developmental Editor: Mary E. Hurley Senior Marketing Manager: Lisa Nicks Senior Project Manager: Vicki Krug Senior Production Supervisor: Sherry L. Kane Lead Media Project Manager: Judi David Manager, Creative Services: Michelle D. Whitaker Cover/Interior Designer: Elise Lansdon (USE) Cover Image: © Paul Souders/Corbis Senior Photo Research Coordinator: John C. Leland Photo Research: David Tietz/Editorial Image, LLC Supplement Producer: Mary Jane Lampe Compositor: Aptara, Inc. Typeface: 10/12 Minion Printer: Quebecor World Dubuque, IA The credits section for this book begins on page 666 and is considered an extension of the copyright page. Library of Congress Cataloging-in-Publication Data Tillery, Bill W. Physical science / Bill W. Tillery. — 8th ed. p. cm. Includes index. ISBN 978–0–07–340452–3 — ISBN 0–07–340452–7 (hard copy : alk. paper) 1. Physical sciences. I. Title. Q158.5.T55 2009 500.2—dc22 2008022993
www.mhhe.com
tiL04527_fm_i-xx.indd Page v 8/7/08 5:47:58 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
BRIEF CONTENTS Preface xii
1 What is Science? 1 PHYSICS
2 Motion 25 3 Energy 61 4 Heat and Temperature 85 5 Wave Motions and Sound 115
6 Electricity 139
11 Water and Solutions 275
21 Geologic Time 511
12 Organic Chemistry 299
22 Atomosphere of Earth 529
13 Nuclear Reactions 327
23 Weather and Climate 551 24 Earth’s Waters 581
ASTRONOMY
14 The Universe 355
Appendix A 605
15 The Solar System 379
Appendix B 613
16 Earth in Space 405
Appendix C 614
7 Light 177
Appendix D 615 EARTH SCIENCE Appendix E 620
CHEMISTRY
17 Rocks and Minerals 431
8 Atoms and Periodic
18 Plate Tectonics 451
Properties 203
9 Chemical Bonds 229 10 Chemical Reactions 251
19 Building Earth’s Surface 471
Glossary 650 Credits 666 Index 669
20 Shaping Earth’s Surface 493
v
tiL04527_fm_i-xx.indd Page vi 8/7/08 5:47:59 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
CONTENTS Preface xii
1
What Is Science? 1
Objects and Properties 2 Quantifying Properties 3 Measurement Systems 4 Standard Units for the Metric System 5 Length 5 Mass 5 Time 6 Metric Prefixes 6 Understandings from Measurements 7 Data 7 Ratios and Generalizations 7 The Density Ratio 8 Symbols and Equations 10 How to Solve Problems 11 The Nature of Science 13 The Scientific Method 14 Explanations and Investigations 14 Science and Society: Basic and Applied Research 15 Laws and Principles 17 Models and Theories 17 Summary 19 People Behind the Science: Florence Bascom 20 Key Terms 21 Applying the Concepts 21 Questions for Thought 23 For Further Analysis 23 Invitation to Inquiry 24 Parallel Exercises 24
vi
Summary 55 Key Terms 56 Applying the Concepts 56 Questions for Thought 59 For Further Analysis 59 Invitation to Inquiry 59 Parallel Exercises 59
PHYSICS
2
Motion 25
Describing Motion 26 Measuring Motion 27 Speed 27 Velocity 29 Acceleration 29 Science and Society: Transportation and the Environment 31 Forces 32 Horizontal Motion on Land 34 Falling Objects 35 A Closer Look: A Bicycle Racer’s Edge 37 Compound Motion 38 Vertical Projectiles 38 Horizontal Projectiles 38 A Closer Look: Free Fall 39 Three Laws of Motion 40 Newton’s First Law of Motion 41 Newton’s Second Law of Motion 41 Weight and Mass 43 Newton’s Third Law of Motion 44 Momentum 46 Conservation of Momentum 46 Impulse 48 Forces and Circular Motion 48 Newton’s Law of Gravitation 49 Earth Satellites 52 A Closer Look: Gravity Problems 53 Weightlessness 53 People Behind the Science: Isaac Newton 54
3
Energy 61
Work 62 Units of Work 62 A Closer Look: Simple Machines 64 Power 64 Motion, Position, and Energy 67 Potential Energy 67 Kinetic Energy 68 Energy Flow 69 Work and Energy 69 Energy Forms 70 Energy Conversion 71 Energy Conservation 74 Energy Transfer 74 Energy Sources Today 74 Science and Society: Grow Your Own Fuel? 75 Petroleum 75 Coal 75 People Behind the Science: James Prescott Joule 76 Moving Water 76 Nuclear 77 Conserving Energy 77 Energy Sources Tomorrow 78 Solar Technologies 78 Geothermal Energy 79 Hydrogen 80 Summary 80 Key Terms 81
tiL04527_fm_i-xx.indd Page vii 8/7/08 5:48:03 PM user-s180
Applying the Concepts 81 Questions for Thought 83 For Further Analysis 83 Invitation to Inquiry 83 Parallel Exercises 83
4
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
5
Heat and Temperature 85
The Kinetic Molecular Theory 86 Molecules 86 Molecules Interact 87 Phases of Matter 87 Molecules Move 88 Temperature 89 Thermometers 89 Temperature Scales 90 A Closer Look: Goose Bumps and Shivering 92 Heat 92 Heat as Energy Transfer 93 Measures of Heat 94 Specific Heat 94 Heat Flow 96 Science and Society: Require Insultation? 97 Energy, Heat, and Molecular Theory 98 Phase Change 99 A Closer Look: Passive Solar Design 101 Evaporation and Condensation 102 Thermodynamics 104 The First Law of Thermodynamics 104 The Second Law of Thermodynamics 105 The Second Law and Natural Processes 106 People Behind the Science: Count Rumford (Benjamin Thompson) 107 Summary 108 Key Terms 109 Applying the Concepts 109 Questions for Thought 111 For Further Analysis 112 Invitation to Inquiry 112 Parallel Exercises 112
Forces and Elastic Materials 116 Forces and Vibrations 116 Describing Vibrations 117 Waves 118 Kinds of Mechanical Waves 119 Waves in Air 119 Describing Waves 120 Sound Waves 122 Sound Waves in Air and Hearing 122 Medium Required 122 A Closer Look: Hearing Problems 123 Velocity of Sound in Air 123 Refraction and Reflection 124 Interference 126 Energy of Waves 127 How Loud Is That Sound? 127 Resonance 128 Sources of Sounds 129 Vibrating Strings 129 Science and Society: Laser Bug 131 Sounds from Moving Sources 131 People Behind the Science: Johann Christian Doppler 132 A Closer Look: Doppler Radar 133 Summary 133 Key Terms 134 Applying the Concepts 134 Questions for Thought 137 For Further Analysis 137 Invitation to Inquiry 137 Parallel Exercises 139
6
Electrostatic Forces 144 Force Fields 144 Electric Potential 145 Electric Current 146 The Electric Circuit 146 The Nature of Current 148 Electrical Resistance 150 Electrical Power and Electrical Work 151 People Behind the Science: Benjamin Franklin 153 Magnetism 154 Magnetic Poles 154 Magnetic Fields 154 The Source of Magnetic Fields 156 Electric Currents and Magnetism 158 Current Loops 158 Applications of Electromagnets 158 Electromagnetic Induction 161 A Closer Look: Current War 162 Generators 162 Transformers 162 Circuit Connections 165 Voltage Sources in Circuits 165 Science and Society: Blackout Reveals Pollution 166 Resistances in Circuits 166 A Closer Look: Solar Cells 167 Household Circuits 168 Summary 170 Key Terms 172 Applying the Concepts 172 Questions for Thought 175 For Further Analysis 175 Invitation to Inquiry 175 Parallel Exercises 175
Wave Motions and Sound 115
7
Light 177
Electricity 139
Concepts of Electricity 140 Electron Theory of Charge 140 Measuring Electrical Charges 143
Sources of Light 178 Properties of Light 180 Light Interacts with Matter 180 Reflection 182 Refraction 183 Dispersion and Color 185 A Closer Look: Optics 186 Evidence for Waves 189 Interference 189
CONTENTS
vii
tiL04527_fm_i-xx.indd Page viii 8/7/08 5:48:09 PM user-s180
A Closer Look: The Rainbow 190 Polarization 190 A Closer Look: Lasers 191 A Closer Look: Why Is the Sky Blue? 192 Evidence for Particles 192 Photoelectric Effect 193 Quantization of Energy 193 The Present Theory 194 A Closer Look: The Compact Disc (CD) 195 Relativity 196 Special Relativity 196 People Behind the Science: James Clerk Maxwell 197 General Theory 198 Summary 198 Key Terms 199 Applying the Concepts 199 Questions for Thought 201 For Further Analysis 201 Invitation to Inquiry 202 Parallel Exercises 202
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Summary 221 Key Terms 222 Applying the Concepts 222 Questions for Thought 225 For Further Analysis 225 Invitation to Inquiry 225 Parallel Exercises 226
9
8
Atoms and Periodic Properties 203
Atom Structure Discovered 204 Discovery of the Electron 204 The Nucleus 206 The Bohr Model 208 The Quantum Concept 208 Atomic Spectra 208 Bohr’s Theory 209 Quantum Mechanics 212 Matter Waves 212 Wave Mechanics 213 The Quantum Mechanics Model 213 Science and Society: Atomic Research 214 Electron Configuration 215 The Periodic Table 216 Metals, Nonmetals, and Semiconductors 218 A Closer Look: The Rare Earths 219 People Behind the Science: Dmitri Ivanovich Mendeleyev 220
viii
CONTENTS
Chemical Bonds 229
Compounds and Chemical Change 230 Valence Electrons and Ions 232 Chemical Bonds 233 Ionic Bonds 234 Covalent Bonds 236 Bond Polarity 238 Composition of Compounds 240 Ionic Compound Names 241 Ionic Compound Formulas 241 Covalent Compound Names 242 Science and Society: Microwave Ovens and Molecular Bonds 243 Covalent Compound Formulas 244 People Behind the Science: Linus Carl Pauling 245 Summary 245 Key Terms 246 Applying the Concepts 246 Questions for Thought 249 For Further Analysis 249 Invitation to Inquiry 249 Parallel Exercises 250
CHEMISTRY
10
Types of Chemical Reactions 260 Combination Reactions 260 Decomposition Reactions 261 Replacement Reactions 261 Ion Exchange Reactions 262 Information from Chemical Equations 263 Units of Measurement Used with Equations 265 Quantitative Uses of Equations 266 Science and Society: The Catalytic Converter 267 People Behind the Science: Emma Perry Carr 268 Summary 268 Key Terms 269 Applying the Concepts 269 Questions for Thought 271 For Further Analysis 272 Invitation to Inquiry 272 Parallel Exercises 272
Chemical Reactions 251
Chemical Formulas 252 Molecular and Formula Weights 253 Percent Composition of Compounds 253 Chemical Equations 255 Balancing Equations 255 Generalizing Equations 259
11
Water and Solutions 275
Household Water 276 Properties of Water 276 Structure of Water Molecules 277 Science and Society: Who Has the Right? 278 The Dissolving Process 279 Concentration of Solutions 280 A Closer Look: Decompression Sickness 283 Solubility 283 Properties of Water Solutions 284 Electrolytes 284 Boiling Point 285 Freezing Point 286 Acids, Bases, and Salts 286 Properties of Acids and Bases 286 Explaining Acid-Base Properties 288 Strong and Weak Acids and Bases 288 The pH Scale 289 Properties of Salts 290 Hard and Soft Water 290 A Closer Look: Acid Rain 292 People Behind the Science: Johannes Nicolaus Brönsted 293
tiL04527_fm_i-xx.indd Page ix 8/7/08 5:48:13 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Measurement of Radiation 335 Measurement Methods 335 A Closer Look: How Is Half-Life Determined? 336 Radiation Units 336 A Closer Look: Carbon Dating 337 Radiation Exposure 338 Nuclear Energy 338 A Closer Look: Radiation and Food Preservation 339 A Closer Look: Nuclear Medicine 340 Nuclear Fission 340 Nuclear Power Plants 343 Nuclear Fusion 346 A Closer Look: Three Mile Island and Chernobyl 346 A Closer Look: Nuclear Waste 348 Science and Society: High-Level Nuclear Waste 349 The Source of Nuclear Energy 349 People Behind the Science: Marie Curie 350 Summary 350 Key Terms 351 Applying the Concepts 351 Questions for Thought 353 For Further Analysis 354 Invitation to Inquiry 354 Parallel Exercises 354
Summary 293 Key Terms 294 Applying the Concepts 294 Questions for Thought 296 For Further Analysis 296 Invitation to Inquiry 297 Parallel Exercises 297
12
Organic Chemistry 299
Organic Compounds 300 Hydrocarbons 300 Alkenes and Alkynes 305 Cycloalkanes and Aromatic Hydrocarbons 306 Petroleum 306 Hydrocarbon Derivatives 309 Alcohols 309 Ethers, Aldehydes, and Ketones 311 Organic Acids and Esters 311 Science and Society: Aspirin, a Common Organic Compound 312 Organic Compounds of Life 313 Proteins 313 Carbohydrates 314 Fats and Oils 315 Synthetic Polymers 316 A Closer Look: How to Sort Plastic Bottles for Recycling 318 People Behind the Science: Alfred Bernhard Nobel 319 Summary 320 Key Terms 320 Applying the Concepts 321 Questions for Thought 323 For Further Analysis 323 Invitation to Inquiry 324 Parallel Exercises 324
13
Nuclear Reactions 327
Natural Radioactivity 328 Nuclear Equations 329 The Nature of the Nucleus 331 Types of Radioactive Decay 332 Radioactive Decay Series 333
A Closer Look: Dark Matter 372 People Behind the Science: Jocelyn (Susan) Bell Burnell 373 Summary 373 Key Terms 374 Applying the Concepts 374 Questions for Thought 377 For Further Analysis 377 Invitation to Inquiry 377
15
Planets, Moons, and Other Bodies 380 Mercury 381 Venus 383 Mars 384 Science and Society: Worth the Cost? 386 Jupiter 387 Saturn 388 Uranus and Neptune 389 Small Bodies of the Solar System 390 Comets 390 Asteroids 393 Meteors and Meteorites 394 Origin of the Solar System 395 Stage A 396 Stage B 396 Stage C 396 Ideas About the Solar System 397 The Geocentric Model 397 The Heliocentric Model 398 People Behind the Science: Percival Lowell 400 Summary 401 Key Terms 402 Applying the Concepts 402 Questions for Thought 404 For Further Analysis 404 Invitation to Inquiry 404
ASTRONOMY
14
The Universe 355
The Night Sky 356 Stars 358 Origin of Stars 358 Brightness of Stars 359 Star Temperature 360 Star Types 361 The Life of a Star 362 Science and Society: Light Pollution 365 Galaxies 366 The Milky Way Galaxy 366 Other Galaxies 367 A Closer Look: Extraterrestrials? 368 The Life of a Galaxy 368 A Closer Look: Redshift and Hubble’s Law 369 A Closer Look: Dark Energy 371
The Solar System 379
16
Earth in Space 405
Shape and Size of Earth 406 Motions of Earth 408 Revolution 408 CONTENTS
ix
tiL04527_fm_i-xx.indd Page x 8/8/08 7:42:27 PM user-s180
Rotation 409 Precession 411 Place and Time 411 Identifying Place 411 Measuring Time 413 Science and Society: Saving Time? 416 The Moon 418 Composition and Features 420 History of the Moon 421 The Earth-Moon System 421 Phases of the Moon 421 Eclipses of the Sun and Moon 423 Tides 424 People Behind the Science: Carl Edward Sagan 425 Summary 425 Key Terms 426 Applying the Concepts 427 Questions for Thought 429 For Further Analysis 430 Invitation to Inquiry 430
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
18
History of Earth’s Interior 452 Earth’s Internal Structure 453 The Crust 454 The Mantle 455 The Core 455 A More Detailed Structure 455 A Closer Look: Seismic Tomography 457 Theory of Plate Tectonics 457 Evidence from Earth’s Magnetic Field 457 Evidence from the Ocean 458 Lithosphere Plates and Boundaries 460 A Closer Look: Measuring Plate Movement 462 Present-Day Understandings 463 People Behind the Science: Harry Hammond Hess 464 Science and Society: Geothermal Energy 465 Summary 466 Key Terms 467 Applying the Concepts 467 Questions for Thought 469 For Further Analysis 470 Invitation to Inquiry 470
EARTH SCIENCE
17
Rocks and Minerals 431
Solid Earth Materials 432 Minerals 433 Crystal Structures 433 Silicates and Nonsilicates 434 Physical Properties of Minerals 436 Mineral-Forming Processes 439 Rocks 440 Igneous Rocks 440 Science and Society: Costs of Mining Mineral Resources 441 A Closer Look: Asbestos 442 Sedimentary Rocks 443 Metamorphic Rocks 444 Science and Society: Using Mineral Resources 445 The Rock Cycle 446 People Behind the Science: Victor Moritz Goldschmidt 447 Summary 447 Key Terms 448 Applying the Concepts 448 Questions for Thought 450 For Further Analysis 450 Invitation to Inquiry 450
x
CONTENTS
19
A Closer Look: Earthquake Safety 482 Origin of Mountains 482 Folded and Faulted Mountains 482 Volcanic Mountains 483 A Closer Look: Volcanoes Change the World 487 People Behind the Science: James Hutton 488 Summary 488 Key Terms 489 Applying the Concepts 489 Questions for Thought 491 For Further Analysis 492 Invitation to Inquiry 492
Plate Tectonics 451
Building Earth’s Surface 471
Interpreting Earth’s Surface 472 Diastrophism 473 Stress and Strain 473 Folding 474 Faulting 476 Earthquakes 477 Causes of Earthquakes 477 Locating and Measuring Earthquakes 479 Measuring Earthquake Strength 479
20
Shaping Earth’s Surface 493
Weathering, Erosion, and Transportation 494 Weathering 494 Soils 498 Erosion 499 Mass Movement 499 Running Water 499 Glaciers 501 Wind 504 Science and Society: Acid Rain 505 Development of Landscapes 505 People Behind the Science: John Wesley Powell 506 Rock Structure 506 Weathering and Erosion Processes 506 State of Development 506 Summary 507 Key Terms 508 Applying the Concepts 508 Questions for Thought 510 For Further Analysis 510 Invitation to Inquiry 510
tiL04527_fm_i-xx.indd Page xi 8/7/08 5:48:21 PM user-s180
21
Science and Society: Use Wind Energy? 539 Water and the Atmosphere 540 Evaporation and Condensation 540 Fog and Clouds 544 People Behind the Science: James Ephraim Lovelock 545 Summary 547 Key Terms 547 Applying the Concepts 547 Questions for Thought 550 For Further Analysis 550 Invitation to Inquiry 550
Geologic Time 511
Fossils 512 Early Ideas About Fossils 512 Types of Fossilization 513 Reading Rocks 516 Arranging Events in Order 516 Correlation 518 Geologic Time 519 Early Attempts at Earth Dating 520 Modern Techniques 520 The Geologic Time Scale 521 Geologic Periods and Typical Fossils 521 Mass Extinctions 523 People Behind the Science: Eduard Suess 524 Interpreting Geologic History— A Summary 525 Summary 525 Key Terms 526 Applying the Concepts 526 Questions for Thought 528 For Further Analysis 528 Invitation to Inquiry 528
22
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
The Atmosphere of Earth 529
The Atmosphere 530 Composition of the Atmosphere 531 Atmospheric Pressure 532 Warming the Atmosphere 533 A Closer Look: Hole in the Ozone Layer? 534 Structure of the Atmosphere 534 The Winds 536 Local Wind Patterns 536 Global Wind Patterns 537 A Closer Look: The Windchill Factor 538
23
Weather and Climate 551
Clouds and Precipitation 552 Cloud-Forming Processes 552 Origin of Precipitation 554 Weather Producers 555 Air Masses 555 Weather Fronts 556 Science and Society: Urban Heat Islands 559 Waves and Cyclones 559 Major Storms 561 Weather Forecasting 565 Climate 565 Major Climate Groups 566 Regional Climate Influence 568 Describing Climates 569 A Closer Look: El Niño and La Niña 572 Climate Change 573 Causes of Global Climate Change 574 Global Warming 574 People Behind the Science: Vilhelm Firman Koren Bjerknes 576 Summary 576 Key Terms 577 Applying the Concepts 577 Questions for Thought 580 For Further Analysis 580 Invitation to Inquiry 580
24
Earth’s Waters 581
Water on Earth 582 Freshwater 583 Science and Society: Water Quality 584 Surface Water 585 Groundwater 585 Freshwater as a Resource 587 A Closer Look: Water Quality and Wastewater Treatment 588 Seawater 590 Oceans and Seas 590 The Nature of Seawater 592 Movement of Seawater 593 A Closer Look: Estuary Pollution 594 A Closer Look: Health of the Chesapeake Bay 596 A Closer Look: Rogue Waves 597 The Ocean Floor 599 People Behind the Science: Rachel Louise Carson 600 Summary 601 Key Terms 602 Applying the Concepts 602 Questions for Thought 604 For Further Analysis 604 Invitation to Inquiry 608 Appendix A 605 Appendix B 613 Appendix C 614 Appendix D 615 Appendix E 620 Glossary 650 Credits 666 Index 669
CONTENTS
xi
tiL04527_fm_i-xx.indd Page xii 8/7/08 5:48:25 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
PREFACE Physical Science is a straightforward, easy-to-read but substantial introduction to the fundamental behavior of matter and energy. It is intended to serve the needs of nonscience majors who are required to complete one or more physical science courses. It introduces basic concepts and key ideas while providing opportunities for students to learn reasoning skills and a new way of thinking about their environment. No prior work in science is assumed. The language, as well as the mathematics, is as simple as can be practical for a college-level science course.
ORGANIZATION The Physical Science sequence of chapters is flexible, and the instructor can determine topic sequence and depth of coverage as needed. The materials are also designed to support a conceptual approach or a combined conceptual and problemsolving approach. With laboratory studies, the text contains enough material for the instructor to select a sequence for a two-semester course. It can also serve as a text in a onesemester astronomy and earth science course or in other combinations. “The text is excellent. I do not think I could have taught the course using any other textbook. I think one reason I really enjoy teaching this course is because of the text. I could say for sure that this is one of the best textbooks I have seen in my career. . . . I love this textbook for the following reasons: (1) it is comprehensive, (2) it is very well written, (3) it is easily readable and comprehendible, (4) it has good graphics.” —Ezat Heydari, Jackson State University
MEETING STUDENT NEEDS Physical Science is based on two fundamental assumptions arrived at as the result of years of experience and observation from teaching the course: (a) that students taking the course often have very limited background and/or aptitude in the natural sciences; and (b) that this type of student will better grasp the ideas and principles of physical science if they are discussed with minimal use of technical terminology and detail. In addition, it is critical for the student to see relevant applications of the material
xii
to everyday life. Most of these everyday-life applications, such as environmental concerns, are not isolated in an arbitrary chapter; they are discussed where they occur naturally throughout the text. Each chapter presents historical background where appropriate, uses everyday examples in developing concepts, and follows a logical flow of presentation. The historical chronology, of special interest to the humanistically inclined nonscience major, serves to humanize the science being presented. The use of everyday examples appeals to the nonscience major, typically accustomed to reading narration, not scientific technical writing, and also tends to bring relevancy to the material being presented. The logical flow of presentation is helpful to students not accustomed to thinking about relationships between what is being read and previous knowledge learned, a useful skill in understanding the physical sciences. Worked examples help students to integrate concepts and understand the use of relationships called equations. They also serve as a model for problem solving; consequently, special attention is given to complete unit work and to the clear, fully expressed use of mathematics. Where appropriate, chapters contain one or more activities, called Concepts Applied, that use everyday materials rather than specialized laboratory equipment. These activities are intended to bring the science concepts closer to the world of the student. The activities are supplemental and can be done as optional student activities or as demonstrations.
tiL04527_fm_i-xx.indd Page xiii 7/29/09 1:11:05 PM user-s176
“It is more readable than any text I’ve encountered. This has been my first experience teaching university physical science; I picked up the book and found it very user-friendly. The level of detail is one of this text’s greatest strengths. It is well suited for a university course.” —Richard M. Woolheater, Southeastern Oklahoma State University
“The author’s goals and practical approach to the subject matter are exactly what we are looking for in a textbook. . . . The practical approach to problem solving is very appropriate for this level of student.” —Martha K. Newchurch, Nicholls State University
“. . . the book engages minimal use of technical language and scientific detail in presenting ideas. It also uses everyday examples to illustrate a point. This approach bonds with the mindset of the nonscience major who is used to reading prose in relation to daily living.” —Ignatius Okafor, Jarvis Christian College
“I was pleasantly surprised to see that the author has written a textbook that seems well suited to introductory physical science at this level. . . . Physical Science seems to strike a nice balance between the two—avoiding unnecessary complications while still maintaining a rigorous viewpoint. I prefer a textbook that goes beyond what I am able to cover in class, but not too much. Tillery seems to have done a good job here.” —T. G. Heil, University of Georgia
NEW TO THIS EDITION Numerous revisions have been made to the text to add new topic areas, update the content on current events and the most recent research topics, and make the text even more user-friendly and relevant for students: Two new elements have been added to this edition to further enhance the text’s focus on developing concepts: • Core and Supporting Concepts have been added to the chapter openers to help integrate the chapter concepts and the chapter outline. The Core and Supporting Concepts outline and emphasize the concepts at a chapter level. The concepts list is designed to help students focus their studies by identifying the most important topics in the outline. • A new Appendix D: Solutions for Follow-Up Example Exercises has been added to provide solutions to the unanswered, second example problems within chapters to further assist students in grasping the concepts as well as the quantitative work conveyed in the in-chapter examples.
/Volumes/208/MH00693_R2/MH00693_R2/work%0/indd%0
The end-of-chapter Applying the Concepts multiple-choice self-tests have been revised to better focus on the concepts covered within each chapter. The list below provides chapter-specific updates: Chapter 1: Text information on pseudoscience has been updated and expanded. Chapter 2: Five new beginning “one-step problems” have been added to the Parallel Exercises Set A and B sections. Also, information on GPS has been added. Chapter 3: There is a new section on Conserving Energy. Chapter 5: A Closer Look on hearing problems has been added. Chapter 7: A new section on special relativity and general relativity (with cross references to astronomy) has been added. Chapter 11: A Closer Look on decompression sickness is now included. Chapter 14: A Myth, Mistakes, and Misunderstanding box on seeing stars during day from bottom of a well has been added. Chapter 15: The information on Pluto and the definition of planets have been updated, along with the most recent data on space exploration, space probes, and new probes. Sections with more detail on Kepler’s Laws, the geocentric model, and the heliocentric model have been included. A Myth, Mistakes, and Misunderstanding box on blue moons has also been added. Chapter 17: A new Science and Society box on using mineral resources now appears. Chapter 19: A new photo of a cinder cone volcano has been added. Chapter 21: Photos of actual fossils have been added. Also, the sections on Geologic Periods and Typical Fossils, Mass Extinctions, and Interpreting Geologic History—A Summary have been expanded. Chapter 23: Sections on Climate Change, Causes of Global Climate Change, and Global Warming along with a discussion of hurricane Katrina have been added. Chapter 24: A Closer Look on rogue waves is now included.
THE LEARNING SYSTEM Physical Science has an effective combination of innovative learning aids intended to make the student’s study of science more effective and enjoyable. This variety of aids is included to help students clearly understand the concepts and principles that serve as the foundation of the physical sciences.
OVERVIEW Chapter 1 provides an overview or orientation to what the study of physical science in general and this text in particular are all about. It discusses the fundamental methods and techniques PREFACE
xiii
tiL04527_fm_i-xx.indd Page xiv 8/7/08 5:48:26 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
used by scientists to study and understand the world around us. It also explains the problem-solving approach used throughout the text so that students can more effectively apply what they have learned.
CHAPTER OPENING TOOLS Core Concept and Supporting Concepts New! Core and Supporting Concepts integrate the chapter concepts and the chapter outline. The Core and Supporting Concepts outline and emphasize the concepts at a chapter level. The concepts list is designed to help students focus their studies by identifying the most important topics in the chapter outline.
chapter, paying particular attention to the topic headings and illustrations so that you get a feel for the kinds of ideas included within the chapter. “Tillery does a much better job explaining concepts and reinforcing them. I believe his style of presentation is better and more comfortable for the student. His use of the overviews and examples is excellent!” —George T. Davis, Jr., Mississippi Delta Community College
tiL04527_ch06_141-178.indd Page 142 5/8/08 10:52:36 PM user-s176
OVERVIEW
Chapter Outline The chapter outline includes all the major topic headings and subheadings within the body of the chapter. It gives you a quick glimpse of the chapter’s contents and helps you locate sections dealing with particular topics. tiL04527_ch06_141-178.indd Page 141 5/8/08 10:52:33 PM user-s176
/Volumes/105/MHDQ042/mhtiL8%0/tiL8ch06
6
Chapters 2–5 have been concerned with mechanical concepts, explanations of the motion of objects that exert forces on one another. These concepts were used to explain straight-line motion, the motion of free fall, and the circular motion of objects on the earth as well as the circular motion of planets and satellites. The mechanical concepts were based on Newton’s laws of motion and are sometimes referred to as Newtonian physics. The mechanical explanations were then extended into the submicroscopic world of matter through the kinetic molecular theory. The objects of motion were now particles, molecules that exert force on one another, and concepts associated with heat were interpreted as the motion of these particles. In a further extension of Newtonian concepts, mechanical explanations were given for concepts associated with sound, a mechanical disturbance that follows the laws of motion as it moves through the molecules of matter. You might wonder, as did the scientists of the 1800s, if mechanical interpretations would also explain other natural phenomena such as electricity, chemical reactions, and light. A mechanical model would be very attractive because it already explained so many other facts of nature, and scientists have always looked for basic, unifying theories. Mechanical interpretations were tried, as electricity was considered a moving fluid, and light was considered a mechanical wave moving through a material fluid. There were many unsolved puzzles with such a model, and gradually it was recognized that electricity, light, and chemical reactions could not be explained by mechanical interpretations. Gradually, the point of view changed from a study of particles to a study of the properties of the space around the particles. In this chapter, you will learn about electric charge in terms of the space around particles. This model of electric charge, called the field model, will be used to develop concepts about electric current, the electric circuit, and electrical work and power. A relationship between electricity and the fascinating topic of magnetism is discussed next, including what magnetism is and how it is produced. The relationship is then used to explain the mechanical production of electricity (Figure 6.1), how electricity is measured, and how electricity is used in everyday technological applications.
CONCEPTS OF ELECTRICITY You are familiar with the use of electricity in many electrical devices such as lights, toasters, radios, and calculators. You are also aware that electricity is used for transportation and for heating and cooling places where you work and live. Many people accept electrical devices as part of their surroundings, with only a hazy notion of how they work. To many people, electricity seems to be magical. Electricity is not magical, and it can be understood, just as we understand any other natural phenomenon. There are theories that explain observations, quantities that can be measured, and relationships between these quantities, or laws, that lead to understanding. All of the observations, measurements, and laws begin with an understanding of electric charge.
Electricity A thunderstorm produces an interesting display of electrical discharge. Each bolt can carry over 150,000 amperes of current with a voltage of 100 million volts.
ELECTRON THEORY OF CHARGE
CORE CONCEPT Electric and magnetic fields interact and can produce forces.
OUTLINE Static Electricity Static electricity is an electric charge confined to an object from the movement of electrons.
Force Field The space around a charge is changed by the charge, and this is called an electric field.
The Electric Circuit Electric current is the rate at which a charge moves.
Electromagnetic Induction A changing magnetic field causes charges to move.
Concepts of Electricity Electron Theory of Charge Static Electricity Measuring Electrical Charges Electrostatic Forces Force Fields Electric Potential Electric Current The Electric Circuit The Nature of Currrent Electrical Resistance Electrical Power and Electrical Work People Behind the Science: Benjamin Franklin Magnetism Magnetic Poles Magnetic Fields The Source of Magnetic Fields Electric Currents and Magnetism Current Loops Applications of Electromagnets Electromagnetic Induction Generators Transformers A Closer Look: Current War Circuit Connections Voltage Sources in Circuits Science and Society: Blackout Reveals Pollution A Closer Look: Solar Cells Resistances in Circuits Household Circuits
Measuring Electrical Charge The size of a static charge is related to the number of electrons that were moved, and this can be measured in units of coulombs.
Source of Magnetic Fields A moving charge produces a magnetic field.
Each chapter begins with an introductory overview. The overview previews the chapter’s contents and what you can expect to learn from reading the chapter. It adds to the general outline of the chapter by introducing you to the concepts to be covered, facilitating in the integration of topics, and helping you to stay focused and organized while reading the chapter for the first time. After reading the introduction, browse through the PREFACE
It was a big mystery for thousands of years. No one could figure out why a rubbed piece of amber, which is fossilized tree resin, would attract small pieces of paper (papyrus), thread, and hair. This unexplained attraction was called the “amber effect.” Then about one hundred years ago, J. J. Thomson (1856–1940) found the answer while experimenting with electric currents. From these experiments, Thomson was able to conclude that negatively charged particles were present in all matter and in fact might be the stuff of which matter is made. The amber effect was traced to the movement of these particles, so they were called electrons after the Greek word for
142
CHAPTER 6
amber. The word electricity is also based on the Greek word for amber. Today, we understand that the basic unit of matter is the atom, which is made up of electrons and other particles such as protons and neutrons. The atom is considered to have a dense center part called a nucleus that contains the closely situated protons and neutrons. The electrons move around the nucleus at some relatively greater distance (Figure 6.2). Details on the nature of protons, neutrons, electrons, and models of how the atom is constructed will be considered in chapter 8. For understanding electricity, you need only consider the protons in the nucleus, the electrons that move around the nucleus, and the fact that electrons can be moved from an atom and caused to move to or from one object to another. Basically, the electrical, light, and chemical phenomena involve the electrons and not the more massive nucleus. The massive nuclei remain in a relatively fixed position in a solid, but some of the electrons can move about from atom to atom.
Electric Charge Electrons and protons have a property called electric charge. Electrons have a negative electric charge and protons have a positive electric charge. The negative or positive description simply means that these two properties are opposite; it does not mean that one is better than the other. Charge is as fundamental to these subatomic particles as gravity is to masses. This means that you cannot separate gravity from a mass, and you cannot separate charge from an electron or a proton.
Electricity
6-2
Electric Potential Electric potential results when work is done moving charges into or out of an electric field, and the potential created between two points is measured in volts.
Chapter Overview
xiv
/Volumes/105/MHDQ042/mhtiL8%0/tiL8ch06
EXAMPLES Each topic discussed within the chapter contains one or more concrete, worked Examples of a problem and its solution as it applies to the topic at hand. Through careful study of these examples, students can better appreciate the many uses of problem solving in the physical sciences. “I feel this book is written well for our average student. The images correlate well with the text, and the math problems make excellent use of the dimensional analysis method. While it was a tossup between this book and another one, now that we’ve taught from the book for the last year, we are extremely happy with it.” —Alan Earhart, Three Rivers Community College
tiL04527_fm_i-xx.indd Page xv 8/7/08 5:48:27 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
tiL04527_ch02_027-062.indd Page 39 5/10/08 5:02:18 PM user-s200
0
1
2
FIGURE 2.5
(A) This graph shows how the speed changes per unit of time while driving at a constant 70 km/h in a straight line. As you can see, the speed is constant, and for straight-line motion, the acceleration is 0. (B) This graph shows the speed increasing from 60 km/h to 80 km/h for 5 s. The acceleration, or change of velocity per unit of time, can be calculated either from the equation for acceleration or by calculating the slope of the straight-line graph. Both will tell you how fast the motion is changing with time.
time elapsed), the velocity was 80 km/h (final velocity). Note how fast the velocity is changing with time. In summary, start (initial velocity) End of first second End of second second End of third second End of fourth second (final velocity)
60 km/h 65 km/h 70 km/h 75 km/h 80 km/h
As you can see, acceleration is really a description of how fast the speed is changing (Figure 2.5); in this case, it is increasing 5 km/h each second. Usually, you would want all the units to be the same, so you would convert km/h to m/s. A change in velocity of 5.0 km/h converts to 1.4 m/s and the acceleration would be 1.4 m/s/s. The units m/s per s mean what change of velocity (1.4 m/s) is occurring every second. The combination m/s/s is rather cumbersome, so it is typically treated mathematically to simplify the expression
32
CHAPTER 2
/Volumes/105/MHDQ042/mhtiL8%0/tiL8ch02
t
3 4 Time (s)
B
This shows that both equations are a time rate of change. Speed is a time rate change of distance. Acceleration is a time rate change of velocity. The time rate of change of something is an important concept that you will meet again in chapter 3.
A Bicycle Racer’s Edge EXAMPLE 2.3 A bicycle moves from rest to 5 m/s in 5 s. What was the acceleration?
SOLUTION vi = 0 m/s vf = 5 m/s t=5s a=?
vf – vi a=_ t 5 m/s – 0 m/s = __ 5s m/s 5_ =_ 5 s m =1 _ s
( ) ( _1s )
m = 1_ s2
EXAMPLE 2.4 An automobile uniformly accelerates from rest at 5 m/s2 for 6 s. What is the final velocity in m/s? (Answer: 30 m/s)
2-6
Motion
APPLYING SCIENCE TO THE REAL WORLD Concepts Applied Each chapter also includes one or more Concepts Applied boxes. These activities are simple investigative exercises that students can perform at home or in the classroom to demonstrate important concepts and reinforce understanding of them. This feature also describes the application of those concepts to everyday life. tiL04527_ch07_179-204.indd Page 191 5/8/08 10:57:16 PM user-s176
Recall that the index of refraction is related to the speed of light in a transparent substance. A glass prism separates sunlight into a spectrum of colors because the index of refraction is different for different wavelengths of light. The same processes that slow the speed of light in a transparent substance have a greater effect on short wavelengths than they do on longer wavelengths. As a result, violet light is refracted most, red light is refracted least, and the other colors are refracted between these extremes. This results in a beam of white light being separated, or dispersed, into a spectrum when it is refracted. Any transparent material in which the index of refraction varies with wavelength has the property of dispersion. The dispersion of light by ice crystals sometimes produces a colored halo around the sun and the moon.
CONCEPTS Applied Colors and Refraction A convex lens is able to magnify by forming an image with refracted light. This application is concerned with magnifying, but it is really more concerned with experimenting to find an explanation. Here are three pairs of words: SCIENCE BOOK RAW HIDE CARBON DIOXIDE Hold a cylindrical solid glass rod over the three pairs of words, using it as a magnifying glass. A clear, solid, and transparent plastic rod or handle could also be used as a magnifying glass. Notice that some words appear inverted but others do not. Does this occur because red letters are refracted differently than blue letters? Make some words with red and blue letters to test your explanation. What is your explanation for what you observed?
A Closer Look
/Volumes/105/MHDQ042/mhtiL8%0/tiL8ch07
EVIDENCE FOR WAVES The nature of light became a topic of debate toward the end of the 1600s as Isaac Newton published his particle theory of light. He believed that the straight-line travel of light could be better explained as small particles of matter that traveled at great speed from a source of light. Particles, reasoned Newton, should follow a straight line according to the laws of motion. Waves, on the other hand, should bend as they move, much as water waves on a pond bend into circular shapes as they move away from a disturbance. About the same time that Newton developed his particle theory of light, Christian Huygens (pronounced “ni-ganz”) (1629–1695) was concluding that light is not a stream of particles but rather a longitudinal wave. Both theories had advocates during the 1700s, but the majority favored Newton’s particle theory. By the beginning of the 1800s, new evidence was found that favored the wave theory, evidence that could not be explained in terms of anything but waves.
INTERFERENCE In 1801, Thomas Young (1773–1829) published evidence of a behavior of light that could only be explained in terms of a wave model of light. Young’s experiment is illustrated in Figure 7.19A. Light from a single source is used to produce two beams of light that are in phase, that is, having their crests and troughs together as they move away from the source. This light falls on a card with two slits, each less than a millimeter in width. The light moves out from each slit as an expanding arc. Beyond the card, the light from one slit crosses over the light from the other slit to produce a series of bright lines on a screen. Young had produced a phenomenon of light called interference, and interference can only be explained by waves.
Closer Look One or more boxed Closer Look features can be found in each chapter of Physical Science. These readings present topics of special human or environmental concern (the use of seat belts, acid rain, and air pollution, for example). In addition to environmental concerns, topics are presented on interesting technological applications (passive solar homes, solar cells, catalytic converters, etc.) or on the cutting edge of scientific research (for example, El Niño and dark energy). All boxed features are informative materials that are supplementary in nature. The Closer Look readings serve to underscore the relevance of physical science in confronting the many issues we face daily.
G
alileo was one of the first to recognize the role of friction in opposing motion. As shown in Figure 2.9, friction with the surface and air friction combine to produce a net force that works against anything that is moving on the surface. This article is about air friction and some techniques that bike riders use to reduce that opposing force— perhaps giving them an edge in a close race. The bike riders in Box Figure 2.1 are forming a single-file line, called a paceline, because the slipstream reduces the air resistance for a closely trailing rider. Cyclists say that riding in the slipstream of another cyclist will save much of their energy. They can move up to 5 mi/h faster than they would expending the same energy riding alone. In a sense, riding in a slipstream means that you do not have to push as much air out of your way. It has been estimated that at 20 mi/h, a cyclist must move a little less than half a ton of air out of the way every minute. Along with the problem of moving air out of the way, there are two basic factors related to air resistance. These are (1) a
BOX FIGURE 2.1 The object of the race is to be in the front, to finish first. If this is true, why are these racers forming a singlefile line?
turbulent versus a smooth flow of air and (2) the problem of frictional drag. A turbulent flow of air contributes to air resistance because it causes the air to separate slightly on the back side, which increases the pressure on the front of the moving object. This is why racing cars, airplanes, boats, and other racing vehicles are streamlined to a teardroplike shape. This shape is not as
likely to have the lower-pressure-producing air turbulence behind (and resulting greater pressure in front) because it smoothes, or streamlines, the air flow. The frictional drag of air is similar to the frictional drag that occurs when you push a book across a rough tabletop. You know that smoothing the rough tabletop will reduce the frictional drag on the book. Likewise, the smoothing of a surface exposed to moving air will reduce air friction. Cyclists accomplish this “smoothing” by wearing smooth Lycra clothing and by shaving hair from arm and leg surfaces that are exposed to moving air. Each hair contributes to the overall frictional drag, and removal of the arm and leg hair can thus result in seconds saved. This might provide enough of an edge to win a close race. Shaving legs and arms, together with the wearing of Lycra or some other tight, smooth-fitting garments, are just a few of the things a cyclist can do to gain an edge. Perhaps you will be able to think of more ways to reduce the forces that oppose motion.
Science and Society These readings relate the chapter’s content to current societal issues. Many of these boxes also include Questions to Discuss that provide an opportunity to discuss issues with your peers.
Myths, Mistakes, and Misunderstandings These brief boxes provide short, scientific explanations to dispel a societal myth or a home experiment or project that enables you to dispel the myth on your own.
tiL04527_ch18_453-472.indd Page 467 5/8/08 11:03:24 PM user-s176
/Volumes/105/MHDQ042/mhtiL8%0/tiL8ch18
Science and Society Geothermal Energy
G
eothermal energy means earth (geo) heat (thermal) energy, or energy in the form of heat from Earth. Beneath the surface of Earth is a very large energy resource in the form of hot water and steam that can be used directly for heat or converted to electricity. Most of the U.S. geothermal resources are located in the western part of the nation where the Juan de Fuca Plate is subducted beneath the continental lithosphere. The Juan de Fuca partially melts, forming magma that is buoyed toward Earth’s surface, erupting as volcanoes (see Figure 19.25). This subduction is the source of heating for the hot water and steam resources in ten western states. There are also geothermal resources in Hawaii from a different geothermal source. One use of geothermal energy is to generate electricity. Geothermal power plants are located in California (ten sites), Hawaii, Nevada (ten sites), Oregon, and Utah (two sites). These sites have a total generating capacity of 2,700 megawatts (MW), which is enough electricity to supply the needs of 3.5 million people. The world’s largest geothermal power plant is located at the Geysers Power Plant in northern California. tiL04527_ch18_453-472.indd Page 465 5/8/08 11:03:02 PM user-s176 Dry steam provides the energy for twentythree units at this site, which generate more than 1,700 MW of electrical power. All of the other sites use hot water rather than steam to generate electricity, with a total generating capacity of 1,000 MW.
In addition to producing electricity, geothermal hot water is used directly for space heating. Space heating in individual houses is accomplished by piping hot water from one geothermal well. District systems, on the other hand, pipe hot water from one or more geothermal wells to several buildings, houses, or blocks of houses. Currently, geothermal hot water is used in individual and district space-heating systems at more than 120 locations. There are more than 1,200 potential geothermal sites that could be developed to provide hot water to more than 370 cities in eight states. The creation of such geothermal districts could result in a savings of up to 50 percent over the cost of natural gas heating. Geothermal hot water is also used directly in greenhouses and aquaculture facilities. There are more than thirty-five large geothermal-energized greenhouses raising vegetables and flowers and more than twenty-five geothermal-energized aquaculture facilities raising fish in Arizona, California, Colorado, Idaho, Montana, Nevada, New York, Oregon, South Dakota, Utah, and Wyoming (see http://geoheat.oit.edu/drsys. htm. A food dehydration facility in Nevada, for example, uses geothermal energy to process more than 15 million pounds of dried onions and garlic per year. Other uses of geothermal energy include laundries, swimming pools, spas, and resorts. Over two hundred resorts are using geothermal hot water in the United States.
Myths, Mistakes, & Misunderstandings Bye Bye California? It is a myth that California will eventually fall off the continent into the ocean. The San Andreas fault is the boundary between the Pacific and North American Plates. The Pacific Plate is moving northwest along the North American Plate at 45 mm per year (about the rate your fingernails grow). The plates are moving horizontally by each other, so there is no reason to believe California will fall into the ocean. However, some 15 million years and millions of earthquakes from now, Los Angeles might be across the bay from San Francisco. See “Earthquakes, Mega Quakes, and the Movies” at http://earthquake.usgs.gov/learning/topics.php?topicID= 36+topic=Myths
Geothermal energy is considered to be one of the renewable energy resources since the energy supply is maintained by plate tectonics. Currently, geothermal energy production is ranked third behind hydroelectricity and biomass but ahead of solar and wind. It has been estimated that known geothermal resources could supply thousands of megawatts more power beyond current production, and development of the potential direct-use applications could displace the use—and greenhouse gas emissions—of 18 million barrels of oil per year.
QUESTIONS TO DISCUSS Discuss with your group the following questions concerning the use of geothermal energy: 1. Why is the development of geothermal energy not proceeding more rapidly? 2. Should the government provide incentives for developing geothermal resources? Give reasons for your answer. 3. What are the advantages and disadvantages of a government-controlled /Volumes/105/MHDQ042/mhtiL8%0/tiL8ch18 geothermal energy industry? 4. As other energy supplies become depleted, who should be responsible for developing new energy supplies, investor-owned industry or government agencies?
g , being gathered and evaluated, and the exact number of plates and their boundaries are yet to be determined with certainty. The major question that remains to be answered is what drives the plates, moving them apart, together, and by each other? One explanation is that slowly turning convective cells in the plastic asthenosphere drive the plates (Figure 18.18). According to this hypothesis, hot mantle materials rise at the diverging boundaries. Some of the material escapes to form new crust, but most of it spreads out beneath the lithosphere. As it moves beneath the lithosphere, it drags the overlying plate with it. Eventually, it cools and sinks back inward under a subduction zone. There is uncertainty about the existence of convective cells in the asthenosphere and their possible role because of a lack of clear evidence. Seismic data is not refined enough to show convective cell movement beneath the lithosphere. In addition,
PREFACE
xv
tiL04527_fm_i-xx.indd Page xvi 8/7/08 5:48:30 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
People Behind the Science Many chapters also have fascinating biographies that spotlight well-known scientists, past or present. From these People Behind the Science biographies, students learn about the human side of the science: physical science is indeed relevant, and real people do the research and make the discoveries. These readings present physical science in real-life terms that students can identify with and understand. “The People Behind the Science features help relate the history of science and the contributions of the various individuals.” —Richard M. Woolheater, Southeastern Oklahoma State University tiL04527_ch01_001-026.indd Page 19 5/8/08 11:10:49 PM user-s176
/Volumes/105/MHDQ042/mhtiL8%0/tiL8ch01
People Behind the Science Florence Bascom (1862–1945)
F
lorence Bascom, a U.S. geologist, was an expert in the study of rocks and minerals and founded the geology department at Bryn Mawr College, Pennsylvania. This department was responsible for training the foremost women geologists of the early twentieth century. Born in Williamstown, Massachusetts, in 1862, Bascom was the youngest of the six children of suffragist and schoolteacher Emma Curtiss Bascom and William Bascom, professor of philosophy at Williams College. Her father, a supporter of suffrage and the education of women, later became president of the University of Wisconsin, to which women were admitted in 1875. Florence Bascom enrolled there in 1877 and with other women was allowed limited access to the facilities but was denied access to classrooms filled with men. In spite of this, she earned a B.A. in 1882, a B.Sc. in 1884, and an M.S. in 1887. When Johns Hopkins University graduate school opened to women in 1889, Bascom was allowed to enroll to study geology on the condition that she sat behind a screen to avoid distracting the male students. With the support of her advisor, George Huntington Williams, and her father, she managed in 1893 to become the second woman to gain a Ph.D. in geology (the first being Mary Holmes at the University of Michigan in 1888). Bascom’s interest in geology had been sparked by a driving tour she took with her father and his friend Edward Orton, a geology professor at Ohio State. It was an exciting time for geologists with new areas opening up all the time. Bascom was also inspired by her teachers at Wisconsin and
Johns Hopkins, who were experts in the new fields of metamorphism and crystallography. Bascom’s Ph.D. thesis was a study of rocks that had previously been thought to be sediments but that she proved to be metamorphosed lava flows. While studying for her doctorate, Bascom became a popular teacher, passing on her enthusiasm and rigor to her students. She taught at the Hampton Institute for Negroes and American Indians and at Rockford College before becoming an instructor and associate professor at Ohio State University in geology from 1892 to 1895. Moving to Bryn Mawr College, where geology was considered subordinate to the other sciences, she spent two years teaching in a storeroom while building a considerable collection of fossils, rocks, and minerals. While at Bryn Mawr, she took great pride in passing on her knowledge and training to a generation of women who would become successful. At Bryn Mawr, she rose rapidly, becoming reader (1898), associate professor (1903), professor (1906), and finally professor emeritus from 1928 till her death in 1945 in Northampton, Massachusetts. Bascom became, in 1896, the first woman to work as a geologist on the U.S. Geological Survey, spending her summers mapping formations in Pennsylvania, Maryland, and New Jersey, and her winters analyzing slides. Her results were published in Geographical Society of America bulletins. In 1924, she became the first woman to be elected a fellow of the Geographical Society and went on, in 1930, to become the first woman vice
president. She was associate editor of the American Geologist (1896–1905) and achieved a four-star place in the first edition of American Men and Women of Science (1906), a sign of how highly regarded she was in her field. Bascom was the author of over forty research papers. She was an expert on the crystalline rocks of the Appalachian Piedmont, and she published her research on Piedmont geomorphology. Geologists in the Piedmont area still value her contributions, and she is still a powerful model for women seeking status in the field of geology today.
END-OF-CHAPTER FEATURES At the end of each chapter, students will find the following materials: • Summary: highlights the key elements of the chapter. • Summary of Equations (chapters 1–13): reinforces retention of the equations presented. • Key Terms: gives page references for finding the terms defined within the context of the chapter reading. • Applying the Concepts: tests comprehension of the material covered with a multiple-choice quiz. • Questions for Thought: challenges students to demonstrate their understanding of the topics. • Parallel Exercises (chapters 1–13): reinforces problemsolving skills. There are two groups of parallel exercises, Group A and Group B. The Group A parallel exercises have complete solutions worked out, along with useful comments, in appendix E. The Group B parallel exercises are similar to those in Group A but do not contain answers in the text. By working through the Group A PREFACE
“The most outstanding feature of Tillery’s Physical Science is the use of the Group A Parallel Exercises. Prior to this text, I cannot count the number of times I have heard students state that they understood the material when presented in class, but when they tried the homework on their own, they were unable to remember what to do. The Group A problems with the complete solution were the perfect reminder for most of the students. I also believe that Tillery’s presentation of the material addresses the topics with a rigor necessary for a college-level course but is easily understandable for my students without being too simplistic. The material is challenging but not too overwhelming.” —J. Dennis Hawk, Navarro College
Source: Modified from the Hutchinson Dictionary of Scientific Biography. © Research Machine’s plc 2006. All Rights Reserved. Helicon Publishing is a division of Research Machines.
xvi
parallel exercises and checking the solutions in appendix E, students will gain confidence in tackling the parallel exercises in Group B and thus reinforce their problemsolving skills. • For Further Analysis: exercises include analysis or discussion questions, independent investigations, and activities intended to emphasize critical thinking skills and societal issues, and develop a deeper understanding of the chapter content. • Invitation to Inquiry: exercises that consist of short, openended activities that allow you to apply investigative skills to the material in the chapter.
tiL04527_ch01_001-026.indd Page 24 5/8/08 11:11:28 PM user-s176
/Volumes/105/MHDQ042/mhtiL8%0/tiL8ch01
QUESTIONS FOR THOUGHT 1. What is a concept? 2. What are two components of a measurement statement? What does each component tell you? 3. Other than familiarity, what are the advantages of the English system of measurement? 4. Define the metric standard units for length, mass, and time. 5. Does the density of a liquid change with the shape of a container? Explain. 6. Does a flattened pancake of clay have the same density as the same clay rolled into a ball? Explain. 7. What is an equation? How are equations used in the physical sciences? 8. Compare and contrast a scientific principle and a scientific law. 9. What is a model? How are models used? 10. Are all theories always completely accepted or completely rejected? Explain.
FOR FURTHER ANALYSIS 1. Select a statement that you feel might represent pseudoscience. Write an essay supporting and refuting your selection, noting facts that support one position or the other. 2. Evaluate the statement that science cannot solve humanproduced problems such as pollution. What does it mean to say pollution is caused by humans and can only be solved by humans? Provide evidence that supports your position. 3. Make an experimental evaluation of what happens to the density of a substance at larger and larger volumes. 4. If your wage were dependent on your work-time squared, how would it affect your pay if you double your hours? 5. Merriam-Webster’s 11th Collegiate Dictionary defines science, in part, as “knowledge or a system of knowledge covering general truths or the operation of general laws especially as obtained and tested through scientific method.” How would you define science? 6. Are there any ways in which scientific methods differ from commonsense methods of reasoning? 7. The United States is the only country in the world that does not use the metric system of measurement. With this understanding, make a list of advantages and disadvantages for adopting the metric system in the United States.
24
CHAPTER 1
What Is Science?
INVITATION TO INQUIRY Paper Helicopters Construct paper helicopters and study the effects that various variables have on their flight. After considering the size you wish to test, copy the patterns shown in Figure 1.17 on a sheet of notebook paper. Note that solid lines are to be cut and dashed lines are to be folded. Make three scissor cuts on the solid lines. Fold A toward you and B away from you to form the wings. Then fold C and D inward to overlap, forming the body. Finally, fold up the bottom on the dashed line and hold it together with a paper clip. Your finished product should look like the helicopter in Figure 1.17. Try a preliminary flight test by standing on a chair or stairs and dropping it. Decide what variables you would like to study to find out how they influence the total flight time. Consider how you will hold everything else constant while changing one variable at a time. You can change the wing area by making new helicopters with more or less area in the A and B flaps. You can change the weight by adding more paper clips. Study these and other variables to find out who can design a helicopter that will remain in the air the longest. Who can design a helicopter that is most accurate in hitting a target?
A
C
B
A
B
D
A
FIGURE 1.17
B
Pattern for a paper helicopter.
1-24
tiL04527_fm_i-xx.indd Page xvii 8/7/08 5:48:31 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
END-OF-TEXT MATERIALS Appendices providing math review, additional background detail, solubility and humidity charts, solutions for the in-chapter follow-up examples, and solutions for the Group A Parallel Exercises can be found at the back of the text. There is also a glossary of all key terms, an index, and special tables printed on the inside covers for reference use. tiL04527_app d_011-015.indd Page 11 5/8/08 11:13:09 PM user-s176
Physical Science, but instructors can also edit questions, import their own content, and create announcements and due dates for assignments. ARIS has automatic grading and reporting of easy-to-assign homework, quizzing, and testing. All student activity within McGraw-Hill’s ARIS is automatically recorded and available to the instructor through a fully integrated grade book that can be downloaded to Excel.
/Volumes/105/MHDQ042/mhtiL8%0/tiL8app
APPENDIX D Solutions for Follow-Up Example Exercises Note: Solutions that involve calculations of measurements are rounded up or down to conform to the rules for signficant figures as described in Appendix A.
2.4
m. t = 5_ s2
CHAPTER 1 1.2
m vi = 0 _ s vf = ?
t = 6s
m = 15.0 g V = 4.50 cm ρ = ?
a =
m ρ = _ V =
15.0 g _
vt = at + vi
∴
t
=
3.33 g _
= (5) (6)
4.50 cm3 cm3
s m ×_ _ 1
s2
m = 30 _ s 2.6
m vi = 25.0 _ s m vf = 0 _ s
CHATER 2 2.2
vf − vi _
m ) (6 s) = (5 _ s2
−v = 8.00 km/h t = 10.0 s d = ?
t = 10.0s a = ? a =
The bicycle has a speed of 8.00 km/h and the time factor is 10.0 s, so km/h must be converted to m/s: −v =
=
m 0.2778 _ s
km _ × 8.00 _ km h _
km h m ×_ ×_ = (0.2778) (8.00) _ s km h m = 2.22 _ s
dt −vt = _ t
t
m m − 25.0 _ 0_ s s __ 10.0 s
−25.0 = _ 10.0
h
d −v = _ t
vt − vi _
1 m ×_ _ s
s
m = −2.50 _ s2 2.9
m = 20 kg F = 40 N a = ?
Personal Response Systems
F = ma ∴
F a=_ m
=
kg . m 40 _ s2 _
s m ×_ = (2.22) (10.0) _ s 1
=
1 __×_
= 22.2 m
m = 2_ s2
d = vt m ) (10.0 s) = (2.22 _ s
20 kg 40 kg . m 20
s2
kg
SUPPLEMENTS Physical Science is accompanied by a variety of multimedia supplementary materials, including an interactive ARIS site with testing software containing multiple-choice test items and other teacher resources. The supplement package also includes a laboratory manual, both student and instructor’s editions, by the author of the text.
MULTIMEDIA SUPPLEMENTARY MATERIALS McGraw-Hill’s ARIS—Assessment, Review, and Instruction System McGraw-Hill’s ARIS for Physical Science is a complete, online electronic homework and course management system designed for greater ease of use than any other system available. Available with the Physical Science eighth edition text, instructors can create and share course materials and assignments with colleagues with a few clicks of the mouse. All PowerPoint lectures, assignments, quizzes, an instructor’s lab manual, text images, an instructor’s manual, test bank questions, clicker questions, animations, and more are directly tied to text-specific materials in
Personal Response Systems (“clickers’) can bring interactivity into the classroom or lecture hall. Wireless response systems give the instructor and students immediate feedback from the entire class. The wireless response pads are essentially remotes that are easy to use and engage students. Clickers allow instructors to motivate student preparation, interactivity, and active learning. Instructors receive immediate feedback to gauge which concepts students understand. Questions covering the content of the Physical Science text and formatted in PowerPoint are available on ARIS for Physical Science.
Computerized Test Bank Online A comprehensive bank of test questions is provided within a computerized test bank powered by McGraw-Hill’s flexible electronic testing program EZ Test Online (www.eztestonline.com). EZ Test Online allows instructors to create paper and online tests or quizzes in this easy-to-use program! Imagine being able to create and access your test or quiz anywhere, at any time without installing the testing software. Now, with EZ Test Online, instructors can select questions from multiple McGraw-Hill test banks or author their own and then either print the test for paper distribution or give it online. Test Creation • Author/edit questions online using the fourteen different question type templates. • Create printed tests or deliver online to get instant scoring and feedback. PREFACE
xvii
tiL04527_fm_i-xx.indd Page xviii 8/7/08 5:48:32 PM user-s180
• Create question pools to offer multiple versions online— great for practice. • Export tests for use in WebCT, Blackboard, PageOut, and Apple’s iQuiz. • Compatible with EZ Test Desktop tests already created. • Sharing tests with colleagues, adjuncts, TAs is easy. Online Test Management • Set availability dates and time limits for the quiz or test. • Control how the test will be presented. • Assign points by question or question type with dropdown menu. • Provide immediate feedback to students or delay until all finish the test. • Create practice tests online to enable students mastery. • Your roster can be uploaded to enable student selfregistration. Online Scoring and Reporting • Automated scoring for most of EZ Test’s numerous question types • Allows manual scoring for essay and other open response questions • Manual rescoring and feedback is also available. • EZ Test’s grade book is designed to easily export to your grade book. • View basic statistical reports Support and help • User’s Guide and built-in, page-specific help • Flash tutorials for getting started on the support site • Support website—www.mhhe.com/eztest • Product specialist available at 1-800-331-5094 • Online training: http://auth.mhhe.com/mpss/workshops/
PRESENTATION CENTER Complete set of electronic book images and assets for instructors. Build instructional materials wherever, whenever, and however you want! Accessed from your textbook’s ARIS website, Presentation Center is an online digital library containing photos, artwork, animations, and other media types that can be used to create customized lectures, visually enhanced tests and quizzes, compelling course websites, or attractive printed support materials. All assets are copyrighted by McGraw-Hill Higher Education but can be used by instructors for classroom purposes. The visual resources in this collection include: • Art and Photo Library: Full-color digital files of all of the illustrations and many of the photos in the text can be readily incorporated into lecture presentations, exams, or custommade classroom materials. • Worked Example Library, Table Library, and Numbered Equations Library: Access the worked examples, tables, and equations from the text in electronic format for inclusion in your classroom resources.
xviii
PREFACE
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
• Animations Library: Files of animations and videos covering the many topics in Physical Science are included so that you can easily make use these animations in a lecture or classroom setting. Also residing on your textbook’s ARIS website are: • PowerPoint Slides: For instructors who prefer to create their lectures from scratch, all illustrations, photos, and tables are preinserted by chapter into blank PowerPoint slides. • Lecture Outlines: Lecture notes, incorporating illustrations and animated images, have been written to the eighth edition text. They are provided in PowerPoint format so that you may use these lectures as written or customize them to fit your lecture. “I find Physical Science to be superior to either of the texts that I have used to date. . . . The animations and illustrations are better than those of other textbooks that I have seen, more realistic and less trivial.” —T. G. Heil, University of Georgia
ELECTRONIC BOOKS If you or your students are ready for an alternative version of the traditional textbook, McGraw-Hill brings you innovative and inexpensive electronic textbooks. By purchasing e-books from McGraw-Hill, students can save as much as 50 percent on selected titles delivered on the most advanced e-book platforms available. E-books from McGraw-Hill are smart, interactive, searchable, and portable, with such powerful tools as detailed searching, highlighting, note taking, and student-to-student or instructorto-student note sharing. E-books from McGraw-Hill will help students to study smarter and quickly find the information they need. Students will also save money. Contact your McGraw-Hill sales representative to discuss e-book packaging options.
PRINTED SUPPLEMENTARY MATERIAL
Laboratory Manual The laboratory manual, written and classroom tested by the author, presents a selection of laboratory exercises specifically written for the interests and abilities of nonscience majors. There are laboratory exercises that require measurement, data analysis, and thinking in a more structured learning environment. Alternative exercises that are open-ended “Invitations to Inquiry” are provided for instructors who would like a less structured approach. When the laboratory manual is used with Physical Science, students will have an opportunity to master basic scientific principles and concepts, learn new problem-solving and thinking skills, and understand the nature of scientific inquiry from the perspective of hands-on experiences. The instructor’s edition of the laboratory manual can be found on the Physical Science ARIS site.
tiL04527_fm_i-xx.indd Page xix 8/7/08 5:48:32 PM user-s180
ACKNOWLEDGMENTS We are indebted to the reviewers for the eighth edition for their constructive suggestions, new ideas, and invaluable advice. Special thanks and appreciation goes out to the eighth edition reviewers: S. Ray Bullock, Grambling State University Brian Carter, California State at San Marcos Pamela M. Clevenger, Hinds Community College Tom Colbert, Augusta State University George T. Davis, Jr., Mississippi Delta Community College J. Dennis Hawk, Navarro College Asaad Istephan, Madonna University Andrew Kiruluta, Harvard University Cynthia M. Lamberty, Nicholls State University Eric C. Martell, Millikin University Pamela Ray, Chattahoochee Valley Community College This revision of Physical Science has also been made possible by the many users and reviewers of its previous editions. The author and publisher are grateful to the following reviewers of previous editions for their critical reviews, comments, and suggestions: Lawrence H. Adams, Polk Community College Miah M. Adel, University of Arkansas at Pine Bluff Adedoyin M. Adeyiga, Cheyney University of Pennsylvania John Akutagawa, Hawaii Pacific University Arthur L. Alt, University of Great Falls Brian Augustine, James Madison University Richard Bady, Marshall University David Benin, Arizona State University Michael Berheide, Berea College Rao Bidthanapally, Oakland University Ignacio Birriel, Morehead State University Charles L. Bissell, Northwestern State University of Louisiana Charles Blatchley, Pittsburg State University W. H. Breazeale, Jr., Francis Marion College William Brown, Montgomery College Peter E. Busher, Boston University Steven Carey, Mobile College Darry S. Carlston, University of Central Oklahoma Stan Celestian, Glendale Community College Pamela M. Clevenger, Hinds Community College Randel Cox, Arkansas State University Paul J. Croft, Jackson State University Keith B. Daniels, University of Wisconsin–Eau Claire Valentina David, Bethune-Cookman College Carl G. Davis, Danville Area Community College Joe D. DeLay, Freed-Hardeman University Renee D. Diehl, Pennsylvania State University Karim Diff, Santa Fe Community College Bill Dinklage, Utah Valley State College Paul J. Dolan, Jr., Northeastern Illinois University Thomas A. Dooling, University of North Carolina at Pembroke Laurencin Dunbar, Livingstone College Alan D. Earhart, Three Rivers Community College Dennis Englin, The Master’s College
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Carl Frederickson, University of Central Arkansas Steven S. Funck, Harrisburg Area Community College Lucille B. Garmon, State University of West Georgia Peter K. Glanz, Rhode Island College Nova Goosby, Philander Smith College D. W. Gosbin, Cumberland County College Omar Franco Guerrero, University of Delaware Floretta Haggard, Rogers State College Robert G. Hamerly, University of Northern Colorado Eric Harms, Brevard Community College Louis Hart, West Liberty State College J. Dennis Hawk, Navarro College T. G. Heil, University of Georgia L. D. Hendrick, Francis Marion College Ezat Heydari, Jackson State University C. A. Hughes, University of Central Oklahoma Christopher Hunt, Prince George’s Community College Judith Iriarte-Gross, Middle Tennessee State University Booker Juma, Fayetteville State University Alice K. Kolalowska, Mississippi State University Linda C. Kondrick, Arkansas Tech University Abe Korn, New York City Tech College Eric T. Lane, University of Tennessee at Chattanooga Lauree G. Lane, Tennessee State University Robert Larson, St. Louis Community College William Luebke, Modesto Junior College Douglas L. Magnus, St. Cloud State University Stephen Majoros, Lorain County Community College L. Whit Marks, Central State University Richard S. Mitchell, Arkansas State University Jesse C. Moore, Kansas Newman College Michael D. Murphy, Northwest Alabama Community College Martha K. Newchurch, Nicholls State University Gabriel Niculescu, James Madison University Christopher Kivuti Njue, Shaw University Ignatius Okafor, Jarvis Christian College Kale Oyedeji, Morehouse College Oladayo Oyelola, Lane College Harold Pray, University of Central Arkansas Virginia Rawlins, University of North Texas Antonie H. Rice, University of Arkansas at Pine Bluff Karen Savage, California State University at Northridge R. Allen Shotwell, Ivy Tech State College Michael L. Sitko, University of Cincinnati K. W. Trantham, Arkansas Tech University R. Steven Turley, Brigham Young University David L. Vosburg, Arkansas State University Ling Jun Wang, University of Tennessee at Chattanooga Martha Reherd Weller, Middle Tennessee State University J. S. Whitaker, Boston University Donald A. Whitney, Hampton University Linda Wilson, Middle Tennessee State University David Wingert, Georgia State University Richard M. Woolheater, Southeastern Oklahoma State University Heather Woolverton, University of Central Arkansas Michael Young, Mississippi Delta Community College
PREFACE
xix
tiL04527_fm_i-xx.indd Page xx 8/7/08 5:48:32 PM user-s180
We would also like to thank the following contributors to the eighth edition: J. Dennis Hawk, Navarro College, for his knowledge of student conceptual understandings, used in developing and revising the personal response system questions to accompany Physical Science, eighth edition. Pamela M. Clevenger, Hinds Community College, for her creativity in revising the multimedia PowerPoint lecture outlines to accompany Physical Science, Eighth Edition. Lee E. Evinger, Missouri Western State University, for his detailed and informative review of the Applying the Concepts end-of-chapter multiple-choice self-tests, which helped to greatly improve this set of questions for the eighth edition. Zdeslay Hrepic, Fort Hays State University and Melinda Huff, Northeastern Oklahoma A & M College, for their detailed reviews of the Physical Science Laboratory Manual. Last, I wish to acknowledge the very special contributions of my wife, Patricia Northrop Tillery, whose assistance and support throughout the revision were invaluable.
MEET THE AUTHOR BILL W. TILLERY Bill W. Tillery is professor emeritus of Physics at Arizona State University, where he was a member of the faculty from 1973 to 2006. He earned a bachelor’s degree at Northeastern State University (1960), and master’s and doctorate degrees
xx
PREFACE
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
from the University of Northern Colorado (1967). Before moving to Arizona State University, he served as director of the Science and Mathematics Teaching Center at the University of Wyoming (1969–73) and as an assistant professor at Florida State University (1967–69). Bill served on numerous councils, boards, and committees, and was honored as the “Outstanding University Educator” at the University of Wyoming in 1972. He was elected the “Outstanding Teacher” in the Department of Physics and Astronomy at Arizona State University in 1995. During his time at Arizona State, Bill taught a variety of courses, including general education courses in science and society, physical science, and introduction to physics. He received more than forty grants from the National Science Foundation, the U.S. Office of Education, from private industry (Arizona Public Service), and private foundations (The Flinn Foundation) for science curriculum development and science teacher inservice training. In addition to teaching and grant work, Bill authored or coauthored more than sixty textbooks and many monographs, and served as editor of three separate newsletters and journals between 1977 and 1996. Bill has attempted to present an interesting, helpful program that will be useful to both students and instructors. Comments and suggestions about how to do a better job of reaching this goal are welcome. Any comments about the text or other parts of the program should be addressed to: Bill W. Tillery e-mail:
[email protected]
tiL04527_ch01_001-024.indd Page 1 7/18/08 7:53:14 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
1
What Is Science? Physical science is concerned with your physical surroundings and your concepts and understanding of these surroundings.
CORE CONCEPT Science is a way of thinking about and understanding your environment.
Objects and Properties Properties are qualities or attributes that can be used to describe an object or event.
Data Data is measurement information that can be used to describe objects, conditions, events, or changes.
Scientific Method Science investigations include collecting observations, developing explanations, and testing explanations.
OUTLINE Objects and Properties Quantifying Properties Measurement Systems Standard Units for the Metric System Length Mass Time Metric Prefixes Understandings from Measurements Data Ratios and Generalizations The Density Ratio Symbols and Equations How to Solve Problems The Nature of Science The Scientific Method Explanations and Investigations Science and Society: Basic and Applied Research Laws and Principles Models and Theories People Behind the Science: Florence Bascom
Quantifying Properties Measurement is used to accurately describe properties of objects or events.
Symbols and Equations An equation is a statement of a relationship between variables.
Laws and Principles Scientific laws describe relationships between events that happen time after time, describing what happens in nature.
Models and Theories A scientific theory is a broad working hypothesis based on extensive experimental evidence, describing why something happens in nature.
1
tiL04527_ch01_001-024.indd Page 2 7/18/08 7:53:16 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
OVERVIEW Have you ever thought about your thinking and what you know? On a very simplified level, you could say that everything you know came to you through your senses. You see, hear, and touch things of your choosing, and you can also smell and taste things in your surroundings. Information is gathered and sent to your brain by your sense organs. Somehow, your brain processes all this information in an attempt to find order and make sense of it all. Finding order helps you understand the world and what may be happening at a particular place and time. Finding order also helps you predict what may happen next, which can be very important in a lot of situations. This is a book on thinking about and understanding your physical surroundings. These surroundings range from the obvious, such as the landscape and the day-to-day weather, to the not so obvious, such as how atoms are put together. Your physical surroundings include natural things as well as things that people have made and used (Figure 1.1). You will learn how to think about your surroundings, whatever your previous experience with thought-demanding situations. This first chapter is about “tools and rules” that you will use in the thinking process.
OBJECTS AND PROPERTIES Physical science is concerned with making sense out of the physical environment. The early stages of this “search for sense” usually involve objects in the environment, things that can be seen or touched. These could be objects you see every day, such as a glass of water, a moving automobile, or a blowing flag. They could be quite large, such as the Sun, the Moon, or even the solar system, or invisible to the unaided human eye. Objects can be any size, but people are usually concerned with objects that are larger than a pinhead and smaller than a house. Outside these limits, the actual size of an object is difficult for most people to comprehend. As you were growing up, you learned to form a generalized mental image of objects called a concept. Your concept of an object is an idea of what it is, in general, or what it should be according to your idea (Figure 1.2). You usually have a word stored away in your mind that represents a concept. The word chair, for example, probably evokes an idea of “something to sit on.” Your generalized mental image for the concept that goes with the word chair probably includes a four-legged object with a backrest. Upon close inspection, most of your (and everyone else’s) concepts are found to be somewhat vague. For example, if the word chair brings forth a mental image of something with four legs and a backrest (the concept), what is the difference between a “high chair” and a “bar stool”? When is a chair a chair and not a stool? These kinds of questions can be troublesome for many people. Not all of your concepts are about material objects. You also have concepts about intangibles such as time, motion, and relationships between events. As was the case with concepts of material objects, words represent the existence of intangible concepts. For example, the words second, hour, day, and month represent concepts of time. A concept of the pushes and pulls that come with changes of motion during an airplane flight might be represented with such words as accelerate and falling. Intangible concepts might seem to be more abstract since they do not represent material objects. By the time you reach adulthood, you have literally thousands of words to represent thousands of concepts. But most,
2
CHAPTER 1
What Is Science?
FIGURE 1.1 Your physical surroundings include naturally occurring and manufactured objects such as sidewalks and buildings. you would find on inspection, are somewhat ambiguous and not at all clear-cut. That is why you find it necessary to talk about certain concepts for a minute or two to see if the other person has the same “concept” for words as you do. That is why 1-2
tiL04527_ch01_001-024.indd Page 3 7/18/08 7:53:18 AM user-s180
FIGURE 1.2
What is your concept of a chair? Are all of these pieces of furniture chairs? Most people have concepts, or ideas of what things in general should be, that are loosely defined. The concept of a chair is one example of a loosely defined concept.
when one person says, “Boy, was it hot!” the other person may respond, “How hot was it?” The meaning of hot can be quite different for two people, especially if one is from Arizona and the other from Alaska! The problem with words, concepts, and mental images can be illustrated by imagining a situation involving you and another person. Suppose that you have found a rock that you believe would make a great bookend. Suppose further that you are talking to the other person on the telephone, and you want to discuss the suitability of the rock as a bookend, but you do not know the name of the rock. If you knew the name, you would simply state that you found a “_______.” Then you would probably discuss the rock for a minute or so to see if the other person really understood what you were talking about. But not knowing the name of the rock and wanting to communicate about the suitability of the object as a bookend, what would you do? You would probably describe the characteristics, or properties, of the rock. Properties are the qualities or attributes that, taken together, are usually peculiar to an object. Since you commonly determine properties with your senses (smell, sight, hearing, touch, and taste), you could say that the properties of an object are the effect the object has on your senses. For example, you might say that the rock is a “big, yellow, smooth rock with shiny gold cubes on one side.” But consider the mental image that the other person on the telephone forms when you describe these properties. It is entirely possible that the other person is thinking of something very different from what you are describing (Figure 1.3)! As you can see, the example of describing a proposed bookend by listing its properties in everyday language leaves much to be desired. The description does not really help the other person form an accurate mental image of the rock. One problem 1-3
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
FIGURE 1.3
Could you describe this rock to another person over the telephone so that the other person would know exactly what you see? This is not likely with everyday language, which is full of implied comparisons, assumptions, and inaccurate descriptions.
with the attempted communication is that the description of any property implies some kind of referent. The word referent means that you refer to, or think of, a given property in terms of another, more familiar object. Colors, for example, are sometimes stated with a referent. Examples are “sky blue,” “grass green,” or “lemon yellow.” The referents for the colors blue, green, and yellow are, respectively, the sky, living grass, and a ripe lemon. Referents for properties are not always as explicit as they are with colors, but a comparison is always implied. Since the comparison is implied, it often goes unspoken and leads to assumptions in communications. For example, when you stated that the rock was “big,” you assumed that the other person knew that you did not mean as big as a house or even as big as a bicycle. You assumed that the other person knew that you meant that the rock was about as large as a book, perhaps a bit larger. Another problem with the listed properties of the rock is the use of the word smooth. The other person would not know if you meant that the rock looked smooth or felt smooth. After all, some objects can look smooth and feel rough. Other objects can look rough and feel smooth. Thus, here is another assumption, and probably all of the properties lead to implied comparisons, assumptions, and a not-very-accurate communication. This is the nature of your everyday language and the nature of most attempts at communication.
QUANTIFYING PROPERTIES Typical day-to-day communications are often vague and leave much to be assumed. A communication between two people, for example, could involve one person describing some person, object, or event to a second person. The description is made by using referents and comparisons that the second person may CHAPTER 1
What Is Science?
3
tiL04527_ch01_001-024.indd Page 4 7/18/08 7:53:19 AM user-s180
or may not have in mind. Thus, such attributes as “long” fingernails or “short” hair may have entirely different meanings to different people involved in a conversation. Assumptions and vagueness can be avoided by using measurement in a description. Measurement is a process of comparing a property to a well-defined and agreed-upon referent. The well-defined and agreed-upon referent is used as a standard called a unit. The measurement process involves three steps: (1) comparing the referent unit to the property being described, (2) following a procedure, or operation, that specifies how the comparison is made, and (3) counting how many standard units describe the property being considered. The measurement process uses a defined referent unit, which is compared to a property being measured. The value of the property is determined by counting the number of referent units. The name of the unit implies the procedure that results in the number. A measurement statement always contains a number and name for the referent unit. The number answers the question “How much?” and the name answers the question “Of what?” Thus, a measurement always tells you “how much of what.” You will find that using measurements will sharpen your communications. You will also find that using measurements is one of the first steps in understanding your physical environment.
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Yard Cubit Inch
Fathom
1,000 double paces = 1 mile Foot
FIGURE 1.5
MEASUREMENT SYSTEMS Measurement is a process that brings precision to a description by specifying the “how much” and “of what” of a property in a particular situation. A number expresses the value of the property, and the name of a unit tells you what the referent is as well as implies the procedure for obtaining the number. Referent units must be defined and established, however, if others are to understand and reproduce a measurement. When standards are established, the referent unit is called a standard unit (Figure 1.4). The use of standard units makes it possible to communicate and duplicate measurements. Standard units are usually defined and established by governments and their agencies that are created for that purpose. In the United States, the agency concerned with measurement standards is the National Institute of Standards and Technology. In Canada, the Standards Council of Canada oversees the National Standard System. 50 leagues 130 nautical miles 150 miles 158 Roman miles 1,200 furlongs 12,000 chains 48,000 rods 452,571 cubits 792,000 feet
FIGURE 1.4 Any of these units and values could have been used at some time or another to describe the same distance between these hypothetical towns. Any unit could be used for this purpose, but when one particular unit is officially adopted, it becomes known as the standard unit. 4
CHAPTER 1
What Is Science?
Many early units for measurement were originally based on the human body. Some of the units were later standardized by governments to become the basis of the English system of measurement.
There are two major systems of standard units in use today, the English system and the metric system. The metric system is used throughout the world except in the United States, where both systems are in use. The continued use of the English system in the United States presents problems in international trade, so there is pressure for a complete conversion to the metric system. More and more metric units are being used in everyday measurements, but a complete conversion will involve an enormous cost. Appendix A contains a method for converting from one system to the other easily. Consult this section if you need to convert from one metric unit to another metric unit or to convert from English to metric units or vice versa. Conversion factors are listed inside the front cover. People have used referents to communicate about properties of things throughout human history. The ancient Greek civilization, for example, used units of stadia to communicate about distances and elevations. The stadium was a unit of length of the racetrack at the local stadium (stadia is the plural of stadium), based on a length of 125 paces. Later civilizations, such as the ancient Romans, adopted the stadia and other referent units from the ancient Greeks. Some of these same referent units were later adopted by the early English civilization, which eventually led to the English system of measurement. Some adopted units of the English system were originally based on parts of the human body, presumably because you always had these referents with you (Figure 1.5). The inch, for example, used the end joint of the thumb for a referent. A foot, 1-4
tiL04527_ch01_001-024.indd Page 5 7/18/08 7:53:20 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Length
TABLE 1.1 Unit
Symbol
Length
meter
m
Mass
kilogram
kg
Time
second
s
Electric current
ampere
A
Temperature
kelvin
K
Amount of substance
mole
mol
Luminous intensity
candela
cd
naturally, was the length of a foot, and a yard was the distance from the tip of the nose to the end of the fingers on an arm held straight out. A cubit was the distance from the end of an elbow to the fingertip, and a fathom was the distance between the fingertips of two arms held straight out. As you can imagine, there were problems with these early units because everyone had different-sized body parts. Beginning in the 1300s, the sizes of the various units were gradually standardized by English kings. The metric system was established by the French Academy of Sciences in 1791. The academy created a measurement system that was based on invariable referents in nature, not human body parts. These referents have been redefined over time to make the standard units more reproducible. The International System of Units, abbreviated SI, is a modernized version of the metric system. Today, the SI system has seven base units that define standards for the properties of length, mass, time, electric current, temperature, amount of substance, and light intensity (Table 1.1). All units other than the seven basic ones are derived units. Area, volume, and speed, for example, are all expressed with derived units. Units for the properties of length, mass, and time are introduced in this chapter. The remaining units will be introduced in later chapters as the properties they measure are discussed.
STANDARD UNITS FOR THE METRIC SYSTEM If you consider all the properties of all the objects and events in your surroundings, the number seems overwhelming. Yet, close inspection of how properties are measured reveals that some properties are combinations of other properties (Figure 1.6). Volume, for example, is described by the three length measurements of length, width, and height. Area, on the other hand, is described by just the two length measurements of length and width. Length, however, cannot be defined in simpler terms of any other property. There are four properties that cannot be described in simpler terms, and all other properties are combinations of these four. For this reason, they are called the fundamental properties. A fundamental property cannot be defined in simpler terms other than to describe how it is 1-5
Width
Property
Height
The SI base units
Area
Volume
Width Length
Length
A=L×W
V=L×W×H
FIGURE 1.6 Area, or the extent of a surface, can be described by two length measurements. Volume, or the space that an object occupies, can be described by three length measurements. Length, however, can be described only in terms of how it is measured, so it is called a fundamental property. measured. These four fundamental properties are (1) length, (2) mass, (3) time, and (4) charge. Used individually or in combinations, these four properties will describe or measure what you observe in nature. Metric units for measuring the fundamental properties of length, mass, and time will be described next. The fourth fundamental property, charge, is associated with electricity, and a unit for this property will be discussed in chapter 6.
LENGTH The standard unit for length in the metric system is the meter (the symbol or abbreviation is m). The meter is defined as the distance that light travels in a vacuum during a certain time period, 1/299,792,458 second. The important thing to remember, however, is that the meter is the metric standard unit for length. A meter is slightly longer than a yard, 39.3 inches. It is approximately the distance from your left shoulder to the tip of your right hand when your arm is held straight out. Many doorknobs are about 1 meter above the floor. Think about these distances when you are trying to visualize a meter length.
MASS The standard unit for mass in the metric system is the kilogram (kg). The kilogram is defined as the mass of a certain metal cylinder kept by the International Bureau of Weights and Measures in France. This is the only standard unit that is still defined in terms of an object. The property of mass is sometimes confused with the property of weight since they are directly proportional to each other at a given location on the surface of Earth. They are, however, two completely different properties and are measured with different units. All objects tend to maintain their state of rest or straight-line motion, and this property is called “inertia.” The mass of an object is a measure of the inertia of an object. The weight of the object is a measure of the force of gravity on it. This distinction between weight and mass will be discussed in detail in chapter 2. For now, remember that weight and mass are not the same property. CHAPTER 1
What Is Science?
5
tiL04527_ch01_001-024.indd Page 6 7/18/08 7:53:20 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
1 meter
TIME The standard unit for time is the second (s). The second was originally defined as 1/86,400 of a solar day (1/60 × 1/60 × 1/24). Earth’s spin was found not to be as constant as thought, so this old definition of one second had to be revised. Adopted in 1967, the new definition is based on a high-precision device known as an atomic clock. An atomic clock has a referent for a second that is provided by the characteristic vibrations of the cesium-133 atom. The atomic clock that was built at the National Institute of Standards and Technology in Boulder, Colorado, will neither gain nor lose a second in 20 million years!
1 decimeter
1 centimeter
METRIC PREFIXES The metric system uses prefixes to represent larger or smaller amounts by factors of 10. Some of the more commonly used prefixes, their abbreviations, and their meanings are listed in Table 1.2. Suppose you wish to measure something smaller than the standard unit of length, the meter. The meter is subdivided into ten equal-sized subunits called decimeters. The prefix deci- has a meaning of “one-tenth of,” and it takes 10 decimeters to equal the length of 1 meter. For even smaller measurements, each decimeter is divided into ten equal-sized subunits called centimeters. It takes 10 centimeters to equal 1 decimeter and 100 to equal 1 meter. In a similar fashion, each prefix up or down the metric ladder represents a simple increase or decrease by a factor of 10 (Figure 1.7). When the metric system was established in 1791, the standard unit of mass was defined in terms of the mass of a certain volume of water. A cubic decimeter (dm3) of pure water at 4°C was defined to have a mass of 1 kilogram (kg). This definition
TABLE 1.2
exa-
Symbol E
FIGURE 1.7
Compare the units shown here. How many millimeters fit into the space occupied by 1 centimeter? How many millimeters fit into the space of 1 decimeter? How many millimeters fit into the space of 1 meter? Can you express all of this as multiples of 10?
was convenient because it created a relationship between length, mass, and volume. As illustrated in Figure 1.8, a cubic decimeter is 10 cm on each side. The volume of this cube is therefore 10 cm × 10 cm × 10 cm, or 1,000 cubic centimeters (abbreviated as cc or cm3). Thus, a volume of 1,000 cm3 of water has a mass of 1 kg. Since 1 kg is 1,000 g, 1 cm3 of water has a mass of 1 g. The volume of 1,000 cm3 also defines a metric unit that is commonly used to measure liquid volume, the liter (L). For smaller amounts of liquid volume, the milliliter (mL) is used. The relationship between liquid volume, volume, and mass of water is therefore 1.0 L ⇒ 1.0 dm3 and has a mass of 1.0 kg
Some metric prefixes Prefix
1 millimeter
Meaning quintillion
Unit Multiplier 10
18 15
peta-
P
quadrillion
10
tera-
T
trillion
1012
giga-
G
billion
109
mega-
M
million
106
kilo-
k
thousand
103
hecto-
h
hundred
102
deka-
da
ten
101
deci-
d
one-tenth
10−1
centi-
c
one-hundredth
10−2
milli-
m
one-thousandth
10−3
micro-
μ
one-millionth
10−6
nano-
n
one-billionth
10−9
pico-
p
one-trillionth
10−12
femto-
f
one-quadrillionth
10−15
or, for smaller amounts, 1.0 mL ⇒ 1.0 cm3 and has a mass of 1.0 g
unit
atto-
6
a
CHAPTER 1
one-quintillionth
What Is Science?
10
−18
FIGURE 1.8
A cubic decimeter of water (1,000 cm3) has a liquid volume of 1 L (1,000 mL) and a mass of 1 kg (1,000 g). Therefore, 1 cm3 of water has a liquid volume of 1 mL and a mass of 1 g.
1-6
tiL04527_ch01_001-024.indd Page 7 7/18/08 7:53:20 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
UNDERSTANDINGS FROM MEASUREMENTS One of the more basic uses of measurement is to describe something in an exact way that everyone can understand. For example, if a friend in another city tells you that the weather has been “warm,” you might not understand what temperature is being described. A statement that the air temperature is 70°F carries more exact information than a statement about “warm weather.” The statement that the air temperature is 70°F contains two important concepts: (1) the numerical value of 70 and (2) the referent unit of degrees Fahrenheit. Note that both a numerical value and a unit are necessary to communicate a measurement correctly. Thus, weather reports describe weather conditions with numerically specified units; for example, 70° Fahrenheit for air temperature, 5 miles per hour for wind speed, and 0.5 inches for rainfall (Figure 1.9). When such numerically specified units are used in a description, or a weather report, everyone understands exactly the condition being described.
DATA Measurement information used to describe something is called data. Data can be used to describe objects, conditions, events, or changes that might be occurring. You really do not know if the weather is changing much from year to year until you compare the yearly weather data. The data will tell you, for example, if the weather is becoming hotter or dryer or is staying about the same from year to year. Let’s see how data can be used to describe something and how the data can be analyzed for further understanding. The cubes illustrated in Figure 1.10 will serve as an example. Each cube can be described by measuring the properties of size and surface area. First, consider the size of each cube. Size can be described by volume, which means how much space something occupies. The volume of a cube can be obtained by measuring and multiplying the length, width, and height. The data is volume of cube a volume of cube b volume of cube c
1 cm3 8 cm3 27 cm3
FIGURE 1.9 A weather report gives exact information, data that describes the weather by reporting numerically specified units for each condition being described. 1-7
1 centimeter 2 centimeters 3 centimeters
FIGURE 1.10
Cube a is 1 centimeter on each side, cube b is 2 centimeters on each side, and cube c is 3 centimeters on each side. These three cubes can be described and compared with data, or measurement information, but some form of analysis is needed to find patterns or meaning in the data.
Now consider the surface area of each cube. Area means the extent of a surface, and each cube has six surfaces, or faces (top, bottom, and four sides). The area of any face can be obtained by measuring and multiplying length and width. The data for the three cubes describes them as follows: cube a cube b cube c
Volume 1 cm3 8 cm3 27 cm3
Surface Area 6 cm2 24 cm2 54 cm2
RATIOS AND GENERALIZATIONS Data on the volume and surface area of the three cubes in Figure 1.10 describes the cubes, but whether it says anything about a relationship between the volume and surface area of a cube is difficult to tell. Nature seems to have a tendency to camouflage relationships, making it difficult to extract meaning from raw data. Seeing through the camouflage requires the use of mathematical techniques to expose patterns. Let’s see how such techniques can be applied to the data on the three cubes and what the pattern means. One mathematical technique for reducing data to a more manageable form is to expose patterns through a ratio. A ratio is a relationship between two numbers that is obtained when one number is divided by another number. Suppose, for example, that an instructor has 50 sheets of graph paper for a laboratory group of 25 students. The relationship, or ratio, between the number of sheets and the number of students is 50 papers to 25 students, and this can be written as 50 papers/25 students. This ratio is simplified by dividing 25 into 50, and the ratio becomes 2 papers/1 student. The 1 is usually understood (not stated), and the ratio is written as simply 2 papers/student. It is read as 2 papers “for each” student, or 2 papers “per” student. The concept of simplifying with a ratio is an important one, and you will see it time and time again throughout science. It is important that you understand the meaning of “per” and “for each” when used with numbers and units. CHAPTER 1
What Is Science?
7
tiL04527_ch01_001-024.indd Page 8 7/21/08 12:19:47 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Applying the ratio concept to the three cubes in Figure 1.10, the ratio of surface area to volume for the smallest cube, cube a, is 6 cm2 to 1 cm3, or
1 cm
1 cm
1 cm
1 cm
2
cm 6 cm 2 = 6 _ _ 1 cm
3
cm 3
meaning there are 6 square centimeters of area for each cubic centimeter of volume. The middle-sized cube, cube b, had a surface area of 24 cm2 and a volume of 8 cm3. The ratio of surface area to volume for this cube is therefore 24 cm 2 = 3 _ cm 2 _ 8 cm 3
cm 3
meaning there are 3 square centimeters of area for each cubic centimeter of volume. The largest cube, cube c, had a surface area of 54 cm2 and a volume of 27 cm3. The ratio is 54 cm 2 =2 _ cm 2 _ 27 cm 3
a−6:1 b−3:1 c−2:1
Now that you have simplified the data through ratios, you are ready to generalize about what the information means. You can generalize that the surface-area-to-volume ratio of a cube decreases as the volume of a cube becomes larger. Reasoning from this generalization will provide an explanation for a number of related observations. For example, why does crushed ice melt faster than a single large block of ice with the same volume? The explanation is that the crushed ice has a larger surface-area-to-volume ratio than the large block, so more surface is exposed to warm air. If the generalization is found to be true for shapes other than cubes, you could explain why a log chopped into small chunks burns faster than the whole log. Further generalizing might enable you to predict if large potatoes would require more or less peeling than the same weight of small potatoes. When generalized explanations result in predictions that can be verified by experience, you gain confidence in the explanation. Finding patterns of relationships is a satisfying intellectual adventure that leads to understanding and generalizations that are frequently practical.
THE DENSITY RATIO The power of using a ratio to simplify things, making explanations more accessible, is evident when you compare the simplified ratio 6 to 3 to 2 with the hodgepodge of numbers that you would have to consider without using ratios. The power of using the ratio technique is also evident when considering other properties of matter. Volume is a property that is sometimes confused with mass. Larger objects do not necessarily contain more matter than smaller objects. A large balloon, for example,
8
CHAPTER 1
Equal volumes of different substances do not have the same mass, as these cube units show. Calculate the densities in g/cm3. Do equal volumes of different substances have the same density? Explain.
cm 3
or 2 square centimeters of area for each cubic centimeter of volume. Summarizing the ratio of surface area to volume for all three cubes, you have small cube middle cube large cube
FIGURE 1.11
What Is Science?
is much larger than this book, but the book is much more massive than the balloon. The simplified way of comparing the mass of a particular volume is to find the ratio of mass to volume. This ratio is called density, which is defined as mass per unit volume. The per means “for each” as previously discussed, and unit means one, or each. Thus, “mass per unit volume” literally means the “mass of one volume” (Figure 1.11). The relationship can be written as mass density = _ volume or m ρ=_ V (ρ is the symbol for the Greek letter rho.) equation 1.1 As with other ratios, density is obtained by dividing one number and unit by another number and unit. Thus, the density of an object with a volume of 5 cm3 and a mass of 10 g is 10 g g density = _3 = 2 _3 5 cm cm The density in this example is the ratio of 10 g to 5 cm3, or 10 g/5 cm3, or 2 g to 1 cm3. Thus, the density of the example object is the mass of one volume (a unit volume), or 2 g for each cm3. Any unit of mass and any unit of volume may be used to express density. The densities of solids, liquids, and gases are usually expressed in grams per cubic centimeter (g/cm3), but the densities of liquids are sometimes expressed in grams per milliliter (g/mL). Using SI standard units, densities are expressed as kg/m3. Densities of some common substances are shown in Table 1.3. 1-8
tiL04527_ch01_001-024.indd Page 9 8/7/08 11:50:50 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
TABLE 1.3
SOLUTION
Densities ( ρ) of some common substances
Density is defined as the ratio of the mass of a substance per unit volume. Assuming the mass is distributed equally throughout the volume, you could assume that the ratio of mass to volume is the same no matter what quantity of mass and volume are measured. If you can accept this assumption, you can use equation 1.1 to determine the density.
g/cm3 Aluminum
2.70
Copper
8.96
Iron
7.87
Lead
11.4
Water
1.00
Seawater
1.03
Mercury Gasoline
Block A m ρ=_ V
mass (m) = 81.0 g volume (V) = 30.0 cm 3 density = ?
81.0 g = _3 30.0 cm
13.6 0.680
g = 2.70 _3 cm Block B
If matter is distributed the same throughout a volume, the ratio of mass to volume will remain the same no matter what mass and volume are being measured. Thus, a teaspoonful, a cup, and a lake full of freshwater at the same temperature will all have a density of about 1 g/cm3 or 1 kg/L. A given material will have its own unique density; example 1.1 shows how density can be used to identify an unknown substance. For help with significant figures, see appendix A (p. 605).
CONCEPTS Applied Density Matters—Sharks and Cola Cans What do a shark and a can of cola have in common? Sharks are marine animals that have an internal skeleton made entirely of cartilage. These animals have no swim bladder to adjust their body density in order to maintain their position in the water; therefore, they must constantly swim or they will sink. The bony fish, on the other hand, have a skeleton composed of bone and most also have a swim bladder. These fish can regulate the amount of gas in the bladder to control their density. Thus, the fish can remain at a given level in the water without expending large amounts of energy. Have you ever noticed the different floating characteristics of cans of the normal version of a carbonated cola beverage and a diet version? The surprising result is that the normal version usually sinks and the diet version usually floats. This has nothing to do with the amount of carbon dioxide in the two drinks. It is a result of the increase in density from the sugar added to the normal version, while the diet version has much less of an artificial sweetener that is much sweeter than sugar. So, the answer is that sharks and regular cans of cola both sink in water.
m ρ=_ V
mass (m) = 135 g volume (V) = 50.0 cm 3 density = ?
135 g = _3 50.0 cm g = 2.70 _3 cm
As you can see, both blocks have the same density. Inspecting Table 1.3, you can see that aluminum has a density of 2.70 g/cm3, so both blocks must be aluminum.
EXAMPLE 1.2 A rock with a volume of 4.50 cm3 has a mass of 15.0 g. What is the density of the rock? (Answer: 3.33 g/cm3)
CONCEPTS Applied A Dense Textbook? What is the density of this book? Measure the length, width, and height of this book in cm, then multiply to find the volume in cm3. Use a scale to find the mass of this book in grams. Compute the density of the book by dividing the mass by the volume. Compare the density in g/cm3 with other substances listed in Table 1.3.
Myths, Mistakes, & Misunderstandings Tap a Can?
EXAMPLE 1.1 Two blocks are on a table. Block A has a volume of 30.0 cm3 and a mass of 81.0 g. Block B has a volume of 50.0 cm3 and a mass of 135 g. Which block has the greater density? If the two blocks have the same density, what material are they? (See Table 1.3.) 1-9
Some people believe that tapping on the side of a can of carbonated beverage will prevent it from foaming over when the can is opened. Is this true or a myth? Set up a controlled experiment (see p. 15) to compare opening cold cans of carbonated beverage that have been tapped with cans that have not been tapped. Are you sure you have controlled all the other variables?
CHAPTER 1
What Is Science?
9
tiL04527_ch01_001-024.indd Page 10 7/18/08 7:53:22 AM user-s180
SYMBOLS AND EQUATIONS In the previous section, the relationship of density, mass, and volume was written with symbols. Density was represented by ρ, the lowercase letter rho in the Greek alphabet, mass was represented by m, and volume by V. The use of such symbols is established and accepted by convention, and these symbols are like the vocabulary of a foreign language. You learn what the symbols mean by use and practice, with the understanding that each symbol stands for a very specific property or concept. The symbols actually represent quantities, or measured properties. The symbol m thus represents a quantity of mass that is specified by a number and a unit, for example, 16 g. The symbol V represents a quantity of volume that is specified by a number and a unit, such as 17 cm3.
Symbols Symbols usually provide a clue about which quantity they represent, such as m for mass and V for volume. However, in some cases, two quantities start with the same letter, such as volume and velocity, so the uppercase letter is used for one (V for volume) and the lowercase letter is used for the other (v for velocity). There are more quantities than upper- and lowercase letters, however, so letters from the Greek alphabet are also used, for example, ρ for mass density. Sometimes a subscript is used to identify a quantity in a particular situation, such as vi for initial, or beginning, velocity and vf for final velocity. Some symbols are also used to carry messages; for example, the Greek letter delta (∆) is a message that means “the change in” a value. Other message symbols are the symbol ∴, which means “therefore,” and the symbol ∝, which means “is proportional to.”
Equations Symbols are used in an equation, a statement that describes a relationship where the quantities on one side of the equal sign are identical to the quantities on the other side. Identical refers to both the numbers and the units. Thus, in the equation describing the property of density, ρ = m/V, the numbers on both sides of the equal sign are identical (e.g., 5 = 10/2). The units on both sides of the equal sign are also identical (e.g., g/cm3 = g/cm3). Equations are used to (1) describe a property, (2) define a concept, or (3) describe how quantities change relative to each other. Understanding how equations are used in these three classes is basic to successful problem solving and comprehension of physical science. Each class of uses is considered separately in the following discussion. Describing a property. You have already learned that the compactness of matter is described by the property called density. Density is a ratio of mass to a unit volume, or ρ = m/V. The key to understanding this property is to understand the meaning of a ratio and what “per” or “for each” means. Other examples of properties that can be defined by ratios are how fast something is moving (speed) and how rapidly a speed is changing (acceleration). Defining a concept. A physical science concept is sometimes defined by specifying a measurement procedure. This
10
CHAPTER 1
What Is Science?
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
is called an operational definition because a procedure is established that defines a concept as well as tells you how to measure it. Concepts of what is meant by force, mechanical work, and mechanical power and concepts involved in electrical and magnetic interactions can be defined by measurement procedures. Describing how quantities change relative to each other. The term variable refers to a specific quantity of an object or event that can have different values. Your weight, for example, is a variable because it can have a different value on different days. The rate of your heartbeat, the number of times you breathe each minute, and your blood pressure are also variables. Any quantity describing an object or event can be considered a variable, including the conditions that result in such things as your current weight, pulse, breathing rate, or blood pressure. As an example of relationships between variables, consider that your weight changes in size in response to changes in other variables, such as the amount of food you eat. With all other factors being equal, a change in the amount of food you eat results in a change in your weight, so the variables of amount of food eaten and weight change together in the same ratio. A graph is used to help you picture relationships between variables (see “Simple Line Graph” on p. 611). When two variables increase (or decrease) together in the same ratio, they are said to be in direct proportion. When two variables are in direct proportion, an increase or decrease in one variable results in the same relative increase or decrease in a second variable. Recall that the symbol ∝ means “is proportional to,” so the relationship is amount of food consumed ∝ weight gain Variables do not always increase or decrease together in direct proportion. Sometimes one variable increases while a second variable decreases in the same ratio. This is an inverse proportion relationship. Other common relationships include one variable increasing in proportion to the square or to the inverse square of a second variable. Here are the forms of these four different types of proportional relationships: Direct Inverse Square Inverse square
a∝b a ∝ 1 b a ∝ b2 a ∝ 1 b2
Proportionality Statements Proportionality statements describe in general how two variables change relative to each other, but a proportionality statement is not an equation. For example, consider the last time you filled your fuel tank at a service station (Figure 1.12). You could say that the volume of gasoline in an empty tank you are filling is directly proportional to the amount of time that the fuel pump was running, or volume ∝ time This is not an equation because the numbers and units are not identical on both sides. Considering the units, for example, 1-10
tiL04527_ch01_001-024.indd Page 11 7/18/08 7:53:22 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
CONCEPTS Applied Inverse Square Relationship An inverse square relationship between energy and distance is found in light, sound, gravitational force, electric fields, nuclear radiation, and any other phenomena that spread equally in all directions from a source. Box Figure 1.1 could represent any of the phenomena that have an inverse square relationship, but let us assume it is showing a light source and how the light spreads at a certain distance (d ), at twice that distance (2d ), and at three times that distance (3d ). As you can see, light twice as far from the source is spread over four times the area and will therefore have one-fourth the intensity. This is the 1 1 same as _ , or _ . 4 22 Light three times as far from the source is spread over nine times the area and will therefore have one-ninth the 1 1 intensity. This is the same as _ , or _ , again showing an 9 32 inverse square relationship. You can measure the inverse square relationship by moving an overhead projector so its light is shining on a wall (see distance d in Box Figure 1.1). Use a light meter or some other way of measuring the intensity of light. Now move the projector to double the distance from the wall. Measure the increased area of the projected light on the wall, and again measure the intensity of the light. What relationship did you find between the light intensity and distance?
FIGURE 1.12
The volume of fuel you have added to the fuel tank is directly proportional to the amount of time that the fuel pump has been running. This relationship can be described with an equation by using a proportionality constant.
In the example, the constant is the flow of gasoline from the pump in L/min (a ratio). Assume the rate of flow is 40 L/min. In units, you can see why the statement is now an equality. L (_ min )
L = (min)
min × L L=_ min L=L
BOX FIGURE 1.1
How much would light moving from point A spread out at twice the distance (2d) and three times the distance (3d)? What would this do to the brightness of the light?
it should be clear that minutes do not equal liters; they are two different quantities. To make a statement of proportionality into an equation, you need to apply a proportionality constant, which is sometimes given the symbol k. For the fuel pump example, the equation is volume = (time)(constant) or V = tk 1-11
A proportionality constant in an equation might be a numerical constant, a constant that is without units. Such numerical constants are said to be dimensionless, such as 2 or 3. Some of the more important numerical constants have their own symbols; for example, the ratio of the circumference of a circle to its diameter is known as π (pi). The numerical constant of π does not have units because the units cancel when the ratio is simplified by division (Figure 1.13). The value of π is usually rounded to 3.14, and an example of using this numerical constant in an equation is that the area of a circle equals π times the radius squared (A = πr2). The flow of gasoline from a pump is an example of a constant that has dimensions (40 L/min). Of course the value of this constant will vary with other conditions, such as the particular fuel pump used and how far the handle on the pump hose is depressed, but it can be considered to be a constant under the same conditions for any experiment.
HOW TO SOLVE PROBLEMS The activity of problem solving is made easier by using certain techniques that help organize your thinking. One such technique is to follow a format, such as the following procedure: Step 1: Read through the problem and make a list of the variables with their symbols on the left side of the page, including the unknown with a question mark. CHAPTER 1
What Is Science?
11
tiL04527_ch01_001-024.indd Page 12 8/8/08 3:24:54 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
all work. If you are not sure how to read the indicated operations, see the section on “Symbols and Operations” in appendix A. Step 7: Now ask yourself if the number seems reasonable for the question that was asked, and ask yourself if the unit is correct. For example, 250 m/s is way too fast for a running student, and the unit for speed is not liters. Step 8: Draw a box around your answer (numbers and units) to communicate that you have found what you were looking for. The box is a signal that you have finished your work on this problem. For an example problem, use the equation from the previous section describing the variables of a fuel pump, V = tk, to predict how long it will take to fill an empty 80-liter tank. Assume k = 40 L/min. Step 1
FIGURE 1.13
The ratio of the circumference of any circle to the diameter of that circle is always π, a numerical constant that is usually rounded to 3.14. Pi does not have units because they cancel in the ratio.
Step 2: Inspect the list of variables and the unknown, and identify the equation that expresses a relationship between these variables. A list of equations discussed in each chapter is found at the end of that chapter. Write the equation on the right side of your paper, opposite the list of symbols and quantities. Step 3: If necessary, solve the equation for the variable in question. This step must be done before substituting any numbers or units in the equation. This simplifies things and keeps down confusion that might otherwise result. If you need help solving an equation, see the section on this topic in appendix A. Step 4: If necessary, convert unlike units so they are all the same. For example, if a time is given in seconds and a speed is given in kilometers per hour, you should convert the km/h to m/s. Again, this step should be done at this point in the procedure to avoid confusion or incorrect operations in a later step. If you need help converting units, see the section on this topic in appendix A. Step 5: Now you are ready to substitute the number value and unit for each symbol in the equation (except the unknown). Note that it might sometimes be necessary to perform a “subroutine” to find a missing value and unit for a needed variable. Step 6: Do the indicated mathematical operations on the numbers and on the units. This is easier to follow if you first separate the numbers and units, as shown in the example that follows and in the examples throughout this text. Then perform the indicated operations on the numbers and units as separate steps, showing
12
CHAPTER 1
What Is Science?
V = 80 L
V = tk
Step 2
k = 80 L/min t =?
tk V =_ _
Step 3
k
k
V t=_ k (no conversion needed for this problem) 80 L t=_ L 40 _
Step 4 Step 5
min
80 _ L ×_ min =_ 40 1 L = 2 min
Step 6 Step 7
Note that procedure step 4 was not required in this solution. This formatting procedure will be demonstrated throughout this text in example problems and in the solutions to problems found in appendix E. Note that each of the chapters with problems has parallel exercises. The exercises in groups A and B cover the same concepts. If you cannot work a problem in group B, look for the parallel problem in group A. You will find a solution to this problem, in the previously described format, in appendix E. Use this parallel problem solution as a model to help you solve the problem in group B. If you follow the suggested formatting procedures and seek help from the appendix as needed, you will find that problem solving is a simple, fun activity that helps you to learn to think in a new way. Here are some more considerations that will prove helpful. 1. Read the problem carefully, perhaps several times, to understand the problem situation. Make a sketch to help you visualize and understand the problem in terms of the real world. 2. Be alert for information that is not stated directly. For example, if a moving object “comes to a stop,” you know that the final velocity is zero, even though this was not stated outright. Likewise, questions about 1-12
tiL04527_ch01_001-024.indd Page 13 7/18/08 7:53:25 AM user-s180
3.
4.
5.
6.
7.
“how far?” are usually asking a question about distance, and questions about “how long?” are usually asking a question about time. Such information can be very important in procedure step 1, the listing of quantities and their symbols. Overlooked or missing quantities and symbols can make it difficult to identify the appropriate equation. Understand the meaning and concepts that an equation represents. An equation represents a relationship that exists between variables. Understanding the relationship helps you to identify the appropriate equation or equations by inspection of the list of known and unknown quantities (procedure step 2). You will find a list of the equations being considered at the end of each chapter. Information about the meaning and the concepts that an equation represents is found within each chapter. Solve the equation before substituting numbers and units for symbols (procedure step 3). A helpful discussion of the mathematical procedures required, with examples, is in appendix A. Note whether the quantities are in the same units. A mathematical operation requires the units to be the same; for example, you cannot add nickels, dimes, and quarters until you first convert them all to the same unit of money. Likewise, you cannot correctly solve a problem if one time quantity is in seconds and another time quantity is in hours. The quantities must be converted to the same units before anything else is done (procedure step 4). There is a helpful section on how to use conversion ratios in appendix A. Perform the required mathematical operations on the numbers and the units as if they were two separate problems (procedure step 6). You will find that following this step will facilitate problem-solving activities because the units you obtain will tell you if you have worked the problem correctly. If you just write the units that you think should appear in the answer, you have missed this valuable self-check. Be aware that not all learning takes place in a given time frame and that solutions to problems are not necessarily arrived at “by the clock.” If you have spent a half an hour or so unsuccessfully trying to solve a particular problem, move on to another problem or do something entirely different for a while. Problem solving often requires time for something to happen in your brain. If you move on to some other activity, you might find that the answer to a problem that you have been stuck on will come to you “out of the blue” when you are not even thinking about the problem. This unexpected revelation of solutions is common to many real-world professions and activities that involve thinking.
Example Problem Mercury is a liquid metal with a mass density of 13.6 g/cm3. What is the mass of 10.0 cm3 of mercury?
Solution The problem gives two known quantities, the mass density (ρ) of mercury and a known volume (V), and identifies an 1-13
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
unknown quantity, the mass (m) of that volume. Make a list of these quantities: ρ = 13.6 g/cm 3 V = 10.0 cm3 m=? The appropriate equation for this problem is the relationship between density (ρ), mass (m), and volume (V): m ρ=_ V The unknown in this case is the mass, m. Solving the equation for m, by multiplying both sides by V, gives: mV Vρ = _ V Vρ = m, or m = Vρ Now you are ready to substitute the known quantities in the equation:
(
)
g m = 13.6 _3 (10.0 cm 3) cm And perform the mathematical operations on the numbers and on the units: m = (13.6)(10.0)
(cm ) (_ cm ) g
3
3
g∙cm 3 = 136_ cm 3 = 136 g
THE NATURE OF SCIENCE Most humans are curious, at least when they are young, and are motivated to understand their surroundings. These traits have existed since antiquity and have proven to be a powerful motivation. In recent times, the need to find out has motivated the launching of space probes to learn what is “out there,” and humans have visited the moon to satisfy their curiosity. Curiosity and the motivation to understand nature were no less powerful in the past than today. Over two thousand years ago, the Greeks lacked the tools and technology of today and could only make conjectures about the workings of nature. These early seekers of understanding are known as natural philosophers, and they observed, thought about, and wrote about the workings of all of nature. They are called philosophers because their understandings came from reasoning only, without experimental evidence. Nonetheless, some of their ideas were essentially correct and are still in use today. For example, the idea of matter being composed of atoms was first reasoned by certain Greeks in the fifth century b.c. The idea of elements, basic components that make up matter, was developed much earlier but refined by the ancient Greeks in the fourth century b.c. The concept of what CHAPTER 1
What Is Science?
13
tiL04527_ch01_001-024.indd Page 14 7/18/08 7:53:25 AM user-s180
the elements are and the concept of the nature of atoms have changed over time, but the ideas first came from ancient natural philosophers.
THE SCIENTIFIC METHOD Some historians identify the time of Galileo and Newton, approximately three hundred years ago, as the beginning of modern science. Like the ancient Greeks, Galileo and Newton were interested in studying all of nature. Since the time of Galileo and Newton, the content of physical science has increased in scope and specialization, but the basic means of acquiring understanding, the scientific investigation, has changed little. A scientific investigation provides understanding through experimental evidence as opposed to the conjectures based on the “thinking only” approach of the ancient natural philosophers. In chapter 2, for example, you will learn how certain ancient Greeks described how objects fall toward Earth with a thought-out, or reasoned, explanation. Galileo, on the other hand, changed how people thought of falling objects by developing explanations from both creative thinking and precise measurement of physical quantities, providing experimental evidence for his explanations. Experimental evidence provides explanations today, much as it did for Galileo, as relationships are found from precise measurements of physical quantities. Thus, scientific knowledge about nature has grown as measurements and investigations have led to understandings that lead to further measurements and investigations. What is a scientific investigation, and what methods are used to conduct one? Attempts have been made to describe scientific methods in a series of steps (define problem, gather data, make hypothesis, test, make conclusion), but no single description has ever been satisfactory to all concerned. Scientists do similar things in investigations, but there are different approaches and different ways to evaluate what is found. Overall, the similar things might look like this: 1. 2. 3. 4.
Observe some aspect of nature. Propose an explanation for something observed. Use the explanation to make predictions. Test predictions by doing an experiment or by making more observations. 5. Modify explanation as needed. 6. Return to step 3. The exact approach used depends on the individual doing the investigation and on the field of science being studied. Another way to describe what goes on during a scientific investigation is to consider what can be generalized. There are at least three separate activities that seem to be common to scientists in different fields as they conduct scientific investigations, and these generalizations look like this: • Collecting observations • Developing explanations • Testing explanations No particular order or routine can be generalized about these common elements. In fact, individual scientists might not
14
CHAPTER 1
What Is Science?
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
even be involved in all three activities. Some, for example, might spend all of their time out in nature, “in the field” collecting data and generalizing about their findings. This is an acceptable means of investigation in some fields of science. Other scientists might spend all of their time indoors at computer terminals developing theoretical equations to explain the generalizations made by others. Again, the work at a computer terminal is an acceptable means of scientific investigation. Thus, many of today’s specialized scientists never engage in a five-step process. This is one reason why many philosophers of science argue that there is no such thing as the scientific method. There are common activities of observing, explaining, and testing in scientific investigations in different fields, and these activities will be discussed next.
EXPLANATIONS AND INVESTIGATIONS Explanations in the natural sciences are concerned with things or events observed, and there can be several different ways to develop or create explanations. In general, explanations can come from the results of experiments, from an educated guess, or just from imaginative thinking. In fact, there are even several examples in the history of science of valid explanations being developed from dreams. Explanations go by various names, each depending on intended use or stage of development. For example, an explanation in an early stage of development is sometimes called a hypothesis. A hypothesis is a tentative thought- or experiment-derived explanation. It must be compatible with observations and provide understanding of some aspect of nature, but the key word here is tentative. A hypothesis is tested by experiment and is rejected, or modified, if a single observation or test does not fit. The successful testing of a hypothesis may lead to the design of experiments, or it could lead to the development of another hypothesis, which could, in turn, lead to the design of yet more experiments, which could lead to. . . . As you can see, this is a branching, ongoing process that is very difficult to describe in specific terms. In addition, it can be difficult to identify an endpoint in the process that you could call a conclusion. The search for new concepts to explain experimental evidence may lead from hypothesis to new ideas, which results in more new hypotheses. This is why one of the best ways to understand scientific methods is to study the history of science. Or do the activity of science yourself by planning, then conducting experiments.
Testing a Hypothesis In some cases, a hypothesis may be tested by simply making some simple observations. For example, suppose you hypothesized that the height of a bounced ball depends only on the height from which the ball is dropped. You could test this by observing different balls being dropped from several different heights and recording how high each bounced. Another common method for testing a hypothesis involves devising an experiment. An experiment is a recreation of an event or occurrence in a way that enables a scientist to support or disprove a hypothesis. This can be difficult, since an event can be influenced by a great many different things. For example, suppose someone tells you that soup heats to the boiling point faster 1-14
tiL04527_ch01_001-024.indd Page 15 7/18/08 7:53:26 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Science and Society Basic and Applied Research
S
cience is the process of understanding your environment. It begins with making observations, creating explanations, and conducting research experiments. New information and conclusions are based on the results of the research. There are two types of scientific research: basic and applied. Basic research is driven by a search for understanding and may or may not have practical applications. Examples of basic research include seeking understandings about how the solar system was created, finding new information about matter by creating a new element in a research lab, or mapping temperature variations on the bottom of the Chesapeake Bay. Such basic research expands our knowledge but will not lead to practical results. Applied research has a goal of solving some practical problem rather than
just looking for answers. Examples of applied research include the creation and testing of a new highly efficient fuel cell to run cars on hydrogen fuel, improving the energy efficiency of the refrigerator, or creating a faster computer chip from new materials. Whether research is basic or applied depends somewhat on the time frame. If a practical use cannot be envisioned in the future, then it is definitely basic research. If a practical use is immediate, then the work is definitely applied research. If a practical use is developed some time in the future, then the research is partly basic and partly practical. For example, when the laser was invented, there was no practical use for it. It was called “an answer waiting for a question.” Today, the laser has many, many practical applications.
than water. Is this true? How can you find the answer to this question? The time required to boil a can of soup might depend on a number of things: the composition of the soup, how much soup is in the pan, what kind of pan is used, the nature of the stove, the size of the burner, how high the temperature is set, environmental factors such as the humidity and temperature, and more factors. It might seem that answering a simple question about the time involved in boiling soup is an impossible task. To help unscramble such situations, scientists use what is known as a controlled experiment. A controlled experiment compares two situations in which all the influencing factors are identical except one. The situation used as the basis of comparison is called the control group and the other is called the experimental group. The single influencing factor that is allowed to be different in the experimental group is called the experimental variable. The situation involving the time required to boil soup and water would have to be broken down into a number of simple questions. Each question would provide the basis on which experimentation would occur. Each experiment would provide information about a small part of the total process of heating liquids. For example, in order to test the hypothesis that soup will begin to boil before water, an experiment could be performed in which soup is brought to a boil (the experimental group), while water is brought to a boil in the control group. Every factor in the control group is identical to the factors in the experimental group except the experimental variable—the soup factor. After the experiment, the new data (facts) are gathered and analyzed. If there were no differences between the two groups, you could conclude that the soup variable evidently did not have a cause-and-effect relationship with the time needed to come to a boil (i.e., soup was not responsible for the time to boil). However, if there were a difference, it would be likely that 1-15
Knowledge gained by basic research has sometimes resulted in the development of technological breakthroughs. On the other hand, other basic research—such as learning how the solar system formed—has no practical value other than satisfying our curiosity.
QUESTIONS TO DISCUSS 1. Should funding priorities go to basic research, applied research, or both? 2. Should universities concentrate on basic research and industries concentrate on applied research, or should both do both types of research? 3. Should research–funding organizations specify which types of research should be funded?
this variable was responsible for the difference between the control and experimental groups. In the case of the time to come to a boil, you would find that soup indeed does boil faster than water alone. If you doubt this, why not do the experiment yourself?
Accept Results? Scientists are not likely to accept the results of a single experiment, since it is possible that a random event that had nothing to do with the experiment could have affected the results and caused people to think there was a cause-and-effect relationship when none existed. For example, the density of soup is greater than the density of water, and this might be the important factor. A way to overcome this difficulty would be to test a number of different kinds of soup with different densities. When there is only one variable, many replicates (copies) of the same experiment are conducted, and the consistency of the results determines how convincing the experiment is. Furthermore, scientists often apply statistical tests to the results to help decide in an impartial manner if the results obtained are valid (meaningful; fit with other knowledge), reliable (give the same results repeatedly), and show cause-and-effect or if they are just the result of random events.
Other Considerations As you can see from the discussion of the nature of science, a scientific approach to the world requires a certain way of thinking. There is an insistence on ample supporting evidence by numerous studies rather than easy acceptance of strongly stated opinions. Scientists must separate opinions from statements of fact. A scientist is a healthy skeptic. CHAPTER 1
What Is Science?
15
tiL04527_ch01_001-024.indd Page 16 7/18/08 7:53:26 AM user-s180
Careful attention to detail is also important. Since scientists publish their findings and their colleagues examine their work, there is a strong desire to produce careful work that can be easily defended. This does not mean that scientists do not speculate and state opinions. When they do, however, they take great care to clearly distinguish fact from opinion. There is also a strong ethic of honesty. Scientists are not saints, but the fact that science is conducted out in the open in front of one’s peers tends to reduce the incidence of dishonesty. In addition, the scientific community strongly condemns and severely penalizes those who steal the ideas of others, perform shoddy science, or falsify data. Any of these infractions could lead to the loss of one’s job and reputation. Science is also limited by the ability of people to pry understanding from the natural world. People are fallible and do not always come to the right conclusions, because information is lacking or misinterpreted, but science is self-correcting. As new information is gathered, old, incorrect ways of thinking must be changed or discarded. For example, at one time people were sure that the Sun went around Earth. They observed that the Sun rose in the east and traveled across the sky to set in the west. Since they could not feel Earth moving, it seemed perfectly logical that the Sun traveled around Earth. Once they understood that Earth rotated on its axis, people began to understand that the rising and setting of the Sun could be explained in other ways. A completely new concept of the relationship between the Sun and Earth developed. Although this kind of study seems rather primitive to us today, this change in thinking about the Sun and Earth was a very important step in understanding the universe and how the various parts are related to one another. This background information was built upon by many generations of astronomers and space scientists, and it finally led to space exploration. People also need to understand that science cannot answer all the problems of our time. Although science is a powerful tool, there are many questions it cannot answer and many problems it cannot solve. The behavior and desires of people generate most of the problems societies face. Famine, drug abuse, and pollution are human-caused and must be resolved by humans. Science may provide some tools for social planners, politicians, and ethical thinkers, but science does not have, nor does it attempt to provide, answers for the problems of the human race. Science is merely one of the tools at our disposal.
Pseudoscience Pseudoscience (pseudo– means false) is a deceptive practice that uses the appearance or language of science to convince, confuse, or mislead people into thinking that something has scientific validity when it does not. When pseudoscientific claims are closely examined, they are not found to be supported by unbiased tests. For example, although nutrition is a respected scientific field, many individuals and organizations make claims about their nutritional products and diets that cannot be supported. Because of nutritional research, we all know that we must obtain certain nutrients such as vitamins and minerals from the food that we eat or we may become ill. Many scientific experiments reliably demonstrate
16
CHAPTER 1
What Is Science?
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
the validity of this information. However, in most cases, it has not been proven that the nutritional supplements so vigorously promoted are as useful or desirable as advertised. Rather, selected bits of scientific information (vitamins and minerals are essential to good health) have been used to create the feeling that additional amounts of these nutritional supplements are necessary or that they can improve your health. In reality, the average person eating a varied diet will obtain all of these nutrients in adequate amounts and will not require nutritional supplements. Another related example involves the labeling of products as organic or natural. Marketers imply that organic or natural products have greater nutritive value because they are organically grown (grown without pesticides or synthetic fertilizers) or because they come from nature. Although there are questions about the health effects of trace amounts of pesticides in foods, no scientific study has shown that a diet of natural or organic products has any benefit over other diets. The poisons curare, strychnine, and nicotine are all organic molecules that are produced in nature by plants that could be grown organically, but we would not want to include them in our diet. Absurd claims that are clearly pseudoscience sometimes appear to gain public acceptance because of promotion in the media. Thus, some people continue to believe stories that psychics can really help solve puzzling crimes, that perpetual energy machines exist, or that sources of water can be found by a person with a forked stick. Such claims could be subjected to scientific testing and disposed of if they fail the test, but this process is generally ignored. In addition to experimentally testing such a claim that appears to be pseudoscience, here are some questions that you should consider when you suspect something is pseudoscience: 1. What is the background and scientific experience of the person promoting the claim? 2. How many articles have been published by the person in peer-reviewed scientific journals? 3. Has the person given invited scientific talks at universities and national professional organization meetings? 4. Has the claim been researched and published by the person in a peer-reviewed scientific journal, and have other scientists independently validated the claim? 5. Does the person have something to gain by making the claim?
CONCEPTS Applied Seekers of Pseudoscience See what you can find out about some recent claims that might not stand up to direct scientific testing. Look into the scientific testing—or lack of testing—behind claims made in relation to cold fusion, cloning human beings, a dowser carrying a forked stick to find water, psychics hired by police departments, Bigfoot, the Bermuda Triangle, and others you might wish to investigate. One source to consider is www.randi.org/jr/archive.html
1-16
tiL04527_ch01_001-024.indd Page 17 7/18/08 7:53:27 AM user-s180
Sometimes you can observe a series of relationships that seem to happen over and over again. There is a popular saying, for example, that “if anything can go wrong, it will.” This is called Murphy’s law. It is called a law because it describes a relationship between events that seems to happen time after time. If you drop a slice of buttered bread, for example, it can land two ways, butter side up or butter side down. According to Murphy’s law, it will land butter side down. With this example, you know at least one way of testing the validity of Murphy’s law. Another “popular saying” type of relationship seems to exist between the cost of a houseplant and how long it lives. You could call it the “law of houseplant longevity” that the life span of a houseplant is inversely proportional to its purchase price. This “law” predicts that a ten-dollar houseplant will wilt and die within a month, but a fifty-cent houseplant will live for years. The inverse relationship is between the variables of (1) cost and (2) life span, meaning the more you pay for a plant, the shorter the time it will live. This would also mean that inexpensive plants will live for a long time. Since the relationship seems to occur time after time, it is called a “law.” A scientific law describes an important relationship that is observed in nature to occur consistently time after time. Basically, scientific laws describe what happens in nature. The law is often identified with the name of a person associated with the formulation of the law. For example, with all other factors being equal, an increase in the temperature of the air in a balloon results in an increase in its volume. Likewise, a decrease in the temperature results in a decrease in the total volume of the balloon. The volume of the balloon varies directly with the temperature of the air in the balloon, and this can be observed to occur consistently time after time. This relationship was first discovered in the latter part of the eighteenth century by two French scientists, A.C. Charles and Joseph Gay-Lussac. Today, the relationship is sometimes called Charles’ law (Figure 1.14). When you read about a scientific law, you should remember that a law is a statement that means something about a relationship that you can observe time after time in nature. Have you ever heard someone state that something behaved a certain way because of a scientific principle or law? For example, a big truck accelerated slowly because of Newton’s laws of motion. Perhaps this person misunderstands the nature of scientific principles and laws. Scientific principles and laws do not dictate the behavior of objects; they simply describe it. They do not say how things ought to act but rather how things do act. A scientific principle or law is descriptive; it describes how things act. A scientific principle describes a more specific set of relationships than is usually identified in a law. The difference between a scientific principle and a scientific law is usually one of the extent of the phenomena covered by the explanation, but there is not always a clear distinction between the two. As an example of a scientific principle, consider Archimedes’
1-17
Verbal: The volume of a gas is directly proportional to the (absolute) temperature for a given amount if the pressure is constant. Equation: ΔV = ΔTk Graph:
Increasing volume
LAWS AND PRINCIPLES
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Increasing temperature
FIGURE 1.14
A relationship between variables can be described in at least three different ways: (1) verbally, (2) with an equation, and (3) with a graph. This figure illustrates the three ways of describing the relationship known as Charles’ law.
principle. This principle is concerned with the relationship between an object, a fluid, and buoyancy, which is a specific phenomenon.
MODELS AND THEORIES Often the part of nature being considered is too small or too large to be visible to the human eye, and the use of a model is needed. A model (Figure 1.15) is a description of a theory or idea that accounts for all known properties. The description can come in many different forms, such as a physical model, a computer model, a sketch, an analogy, or an equation. No one has ever seen the whole solar system, for example, and all you can see in the real world is the movement of the Sun, moon, and planets against a background of stars. A physical model or sketch of the solar system, however, will give you a pretty good idea of what the solar system might look like. The physical model and the sketch are both models, since they both give you a mental picture of the solar system. At the other end of the size scale, models of atoms and molecules are often used to help us understand what is happening in this otherwise invisible world. A container of small, bouncing rubber balls can be used as a model to explain the relationships of Charles’ law. This model helps you see what happens to invisible particles of air as the temperature, volume, or pressure of the gas changes. Some models are better than others are, and models constantly change as our understanding evolves. Early twentieth-century models of atoms, for example, were based on a “planetary model,” in which electrons moved around the nucleus like planets around the Sun. Today, the model has changed as our under-
CHAPTER 1
What Is Science?
17
tiL04527_ch01_001-024.indd Page 18 7/18/08 7:53:27 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
A
Sunlight
Second reflection
First refraction
Second refraction
Reflection Enlarged raindrop
Rainbow ray
42
51 Second refraction
First reflection
First refraction
Sunlight
Rainbow ray Observer
Observer
B
FIGURE 1.15
A model helps you visualize something that cannot be observed. You cannot observe what is making a double rainbow, for example, but models of light entering the upper and lower surfaces of a raindrop help you visualize what is happening. The drawings in B serve as a model that explains how a double rainbow is produced (also see “The Rainbow” in chapter 7).
18
CHAPTER 1
What Is Science?
1-18
tiL04527_ch01_001-024.indd Page 19 7/18/08 7:53:29 AM user-s180
150
120
90
60
30
0
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
30
60
90
60
30
0
30
A
B
FIGURE 1.16
(A) Normal position of the continents on a world map. (B) A sketch of South America and Africa, suggesting that they once might have been joined together and subsequently separated by continental drift.
standing of the nature of atoms has changed. Electrons are now pictured as vibrating with certain wavelengths, which can make standing waves only at certain distances from the nucleus. Thus, the model of the atom changed from one that
views electrons as solid particles to one that views them like vibrations on a string. The most recently developed scientific theory was refined and expanded during the 1970s. This theory concerns the surface of Earth, and it has changed our model of what Earth is like. At first, the basic idea of today’s accepted theory was pure and simple conjecture. The term conjecture usually means an explanation or idea based on speculation, or one based on trivial grounds without any real evidence. Scientists would look at a map of Africa and South America, for example, and mull over how the two continents look like pieces of a picture puzzle that had moved apart (Figure 1.16). Any talk of moving continents was considered conjecture, because it was not based on anything acceptable as real evidence. Many years after the early musings about moving continents, evidence was collected from deep-sea drilling rigs that the ocean floor becomes progressively older toward the African and South American continents. This was good enough evidence to establish the “seafloor spreading hypothesis” that described the two continents moving apart. If a hypothesis survives much experimental testing and leads, in turn, to the design of new experiments with the generation of new hypotheses that can be tested, you now have a working theory. A theory is defined as a broad working hypothesis that is based on extensive experimental evidence. A scientific theory tells you why something happens. For example, the plate tectonic theory describes how the continents have moved apart, just like pieces of a picture puzzle. Is this the same idea that was once considered conjecture? Sort of, but this time it is supported by experimental evidence. The term scientific theory is reserved for historic schemes of thought that have survived the test of detailed examination for long periods of time. The atomic theory, for example, was developed in the late 1800s and has been the subject of extensive investigation and experimentation over the last century. The atomic theory and other scientific theories form the framework of scientific thought and experimentation today. Scientific theories point to new ideas about the behavior of nature, and these ideas result in more experiments, more data to collect, and more explanations to develop. All of this may lead to a slight modification of an existing theory, a major modification, or perhaps the creation of an entirely new theory. These activities are all part of the continuing attempt to satisfy our curiosity about nature.
SUMMARY Physical science is a search for order in our physical surroundings. People have concepts, or mental images, about material objects and intangible events in their surroundings. Concepts are used for thinking and communicating. Concepts are based on properties, or attributes that describe a thing or event. Every property implies a referent that describes the property. Referents are not always explicit, and most communications require assumptions. Measurement brings precision to descriptions by using numbers and standard units for referents to communicate “exactly how much of exactly what.” 1-19
Measurement is a process that uses a well-defined and agreedupon referent to describe a standard unit. The unit is compared to the property being defined by an operation that determines the value of the unit by counting. Measurements are always reported with a number, or value, and a name for the unit. The two major systems of standard units are the English system and the metric system. The English system uses standard units that were originally based on human body parts, and the metric system uses standard units based on referents found in nature. The metric system also uses a system of CHAPTER 1
What Is Science?
19
tiL04527_ch01_001-024.indd Page 20 7/18/08 7:53:29 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
People Behind the Science Florence Bascom (1862–1945)
F
lorence Bascom, a U.S. geologist, was an expert in the study of rocks and minerals and founded the geology department at Bryn Mawr College, Pennsylvania. This department was responsible for training the foremost women geologists of the early twentieth century. Born in Williamstown, Massachusetts, in 1862, Bascom was the youngest of the six children of suffragist and schoolteacher Emma Curtiss Bascom and William Bascom, professor of philosophy at Williams College. Her father, a supporter of suffrage and the education of women, later became president of the University of Wisconsin, to which women were admitted in 1875. Florence Bascom enrolled there in 1877 and with other women was allowed limited access to the facilities but was denied access to classrooms filled with men. In spite of this, she earned a B.A. in 1882, a B.Sc. in 1884, and an M.S. in 1887. When Johns Hopkins University graduate school opened to women in 1889, Bascom was allowed to enroll to study geology on the condition that she sat behind a screen to avoid distracting the male students. With the support of her advisor, George Huntington Williams, and her father, she managed in 1893 to become the second woman to gain a Ph.D. in geology (the first being Mary Holmes at the University of Michigan in 1888). Bascom’s interest in geology had been sparked by a driving tour she took with her father and his friend Edward Orton, a geology professor at Ohio State. It was an exciting time for geologists with new areas
opening up all the time. Bascom was also inspired by her teachers at Wisconsin and Johns Hopkins, who were experts in the new fields of metamorphism and crystallography. Bascom’s Ph.D. thesis was a study of rocks that had previously been thought to be sediments but that she proved to be metamorphosed lava flows. While studying for her doctorate, Bascom became a popular teacher, passing on her enthusiasm and rigor to her students. She taught at the Hampton Institute for Negroes and American Indians and at Rockford College before becoming an instructor and associate professor at Ohio State University in geology from 1892 to 1895. Moving to Bryn Mawr College, where geology was considered subordinate to the other sciences, she spent two years teaching in a storeroom while building a considerable collection of fossils, rocks, and minerals. While at Bryn Mawr, she took great pride in passing on her knowledge and training to a generation of women who would become successful. At Bryn Mawr, she rose rapidly, becoming reader (1898), associate professor (1903), professor (1906), and finally professor emeritus from 1928 till her death in 1945 in Northampton, Massachusetts. Bascom became, in 1896, the first woman to work as a geologist on the U.S. Geological Survey, spending her summers mapping formations in Pennsylvania, Maryland, and New Jersey, and her winters analyzing slides. Her results were published in Geographical Society of
America bulletins. In 1924, she became the first woman to be elected a fellow of the Geographical Society and went on, in 1930, to become the first woman vice president. She was associate editor of the American Geologist (1896–1905) and achieved a four-star place in the first edition of American Men and Women of Science (1906), a sign of how highly regarded she was in her field. Bascom was the author of over forty research papers. She was an expert on the crystalline rocks of the Appalachian Piedmont, and she published her research on Piedmont geomorphology. Geologists in the Piedmont area still value her contributions, and she is still a powerful model for women seeking status in the field of geology today.
Source:(c) Research Machines plc 2006. All rights reserved. Helicon Publishing is a division of Research Mashines.
prefixes to express larger or smaller amounts of units. The metric standard units for length, mass, and time are the meter, kilogram, and second. Measurement information used to describe something is called data. One way to extract meanings and generalizations from data is to use a ratio, a simplified relationship between two numbers. Density is a ratio of mass to volume, or ρ = m/V. Symbols are used to represent quantities, or measured properties. Symbols are used in equations, which are shorthand statements that describe a relationship where the quantities (both number values and units) are identical on both sides of the equal sign. Equations are used to (1) describe a property, (2) define a concept, or (3) describe how quantities change together. Quantities that can have different values at different times are called variables. Variables that increase or decrease together in the
20
CHAPTER 1
What Is Science?
same ratio are said to be in direct proportion. If one variable increases while the other decreases in the same ratio, the variables are in inverse proportion. Proportionality statements are not necessarily equations. A proportionality constant can be used to make such a statement into an equation. Proportionality constants might have numerical value only, without units, or they might have both value and units. Modern science began about three hundred years ago during the time of Galileo and Newton. Since that time, scientific investigation has been used to provide experimental evidence about nature. Methods used to conduct scientific investigations can be generalized as collecting observations, developing explanations, and testing explanations. A hypothesis is a tentative explanation that is accepted or rejected based on experimental data. Experimental data can come from observations or from a controlled experiment. The controlled experi1-20
tiL04527_ch01_001-024.indd Page 21 8/7/08 11:51:08 PM user-s180
ment compares two situations that have all the influencing factors identical except one. The single influencing variable being tested is called the experimental variable, and the group of variables that form the basis of comparison is called the control group. An accepted hypothesis may result in a principle, an explanation concerned with a specific range of phenomena, or a scientific law, an explanation concerned with important, wider-ranging phenomena. Laws are sometimes identified with the name of a scientist and can be expressed verbally, with an equation, or with a graph. A model is used to help understand something that cannot be observed directly, explaining the unknown in terms of things already understood. Physical models, mental models, and equations are all examples of models that explain how nature behaves. A theory is a broad, detailed explanation that guides development and interpretations of experiments in a field of study.
SUMMARY OF EQUATIONS 1.1 mass density = _ volume m ρ=_ V
KEY TERMS area (p. 7) controlled experiment (p. 15) data (p. 7) density (p. 8) direct proportion (p. 10) English system (p. 4) equation (p. 10) experiment (p. 14) fundamental properties (p. 5) hypothesis (p. 14) inverse proportion (p. 10) kilogram (p. 5) liter (p. 6) measurement (p. 4) meter (p. 5) metric system (p. 5) model (p. 17) numerical constant (p. 11) properties (p. 3) proportionality constant (p. 11) pseudoscience (p. 16) quantities (p. 10) ratio (p. 7) referent (p. 3) scientific law (p. 17) scientific principle (p. 17) second (p. 6) standard unit (p. 4) theory (p. 20) unit (p. 4) variable (p. 10) volume (p. 7) 1-21
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
APPLYING THE CONCEPTS 1. A generalized mental image of an object is a (an) a. definition. b. impression. c. concept. d. mental picture. 2. Which of the following is the best example of the use of a referent? a. A red bicycle b. Big as a dump truck c. The planet Mars d. Your textbook 3. A well-defined and agreed-upon referent used as a standard in all systems of measurement is called a (an) a. yardstick. b. unit. c. quantity. d. fundamental. 4. The system of measurement based on referents in nature, but not with respect to human body parts, is the a. natural system. b. English system. c. metric system. d. American system. 5. A process of comparing a property to a well-defined and agreedupon referent is called a a. measurement. b. referral. c. magnitude. d. comparison. 6. One of the following is not considered to be a fundamental property: a. weight. b. length. c. time. d. charge. 7. How much space something occupies is described by its a. mass. b. volume. c. density. d. weight. 8. The relationship between two numbers that is usually obtained by dividing one number by the other is called a (an) a. ratio. b. divided size. c. number tree. d. equation. 9. The ratio of mass per volume of a substance is called its a. weight. b. weight-volume. c. mass-volume. d. density. 10. After identifying the appropriate equation, the next step in correctly solving a problem is to a. substitute known quantities for symbols. b. solve the equation for the variable in question. c. separate number and units. d. convert all quantities to metric units.
CHAPTER 1
What Is Science?
21
tiL04527_ch01_001-024.indd Page 22 7/18/08 7:53:31 AM user-s180
11. Suppose a problem situation describes a speed in km/h and a length in m. What conversion should you do before substituting quantities for symbols? Convert a. km/h to km/s. b. m to km. c. km/h to m/s. d. In this situation, no conversions should be made. 12. An equation describes a relationship where a. the numbers and units on both sides are proportional but not equal. b. the numbers on both sides are equal but not the units. c. the units on both sides are equal but not the numbers. d. the numbers and units on both sides are equal. m 13. The equation ρ = _ is a statement that V a. describes a property. b. defines how variables can change. c. describes how properties change. d. identifies proportionality constant. 14. Measurement information that is used to describe something is called a. referents. b. properties. c. data. d. a scientific investigation. 15. If you consider a very small portion of a material that is the same throughout, the density of the small sample will be a. much less. b. slightly less. c. the same. d. greater. 16. The symbol ∆ has a meaning of a. “is proportional to.” b. “the change in.” c. “therefore.” d. “however.” 17. A model is a. a physical copy of an object or system made at a smaller scale. b. a sketch of something complex used to solve problems. c. an interpretation of a theory by use of an equation. d. All of the above are models. 18. The use of a referent in describing a property always implies a. a measurement. b. naturally occurring concepts. c. a comparison with a similar property of another object. d. that people have the same understandings of concepts. 19. A 5-km span is the same as how many meters? a. 0.005 m b. 0.05 m c. 500 m d. 5,000 m 20. One-half liter of water is the same volume as a. 5,000 mL. b. 0.5 cc. c. 500 cm3. d. 5 dm3. 21. Which of the following is not a measurement? a. 24°C b. 65 mph c. 120 d. 0.50 ppm
22
CHAPTER 1
What Is Science?
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
22. What happens to the surface-area-to-volume ratio as the volume of a cube becomes larger? a. It remains the same. b. It increases. c. It decreases. d. The answer varies. 23. If one variable increases in value while a second, related variable decreases in value, the relationship is said to be a. direct. b. inverse. c. square. d. inverse square. 24. What is needed to change a proportionality statement into an equation? a. Include a proportionality constant. b. Divide by unknown to move symbol to left side of equal symbol. c. Add units to one side to make units equal. d. Add numbers to one side to make both sides equal. 25. A proportionality constant a. always has a unit. b. never has a unit. c. might or might not have a unit. 26. A scientific investigation provides understanding through a. explanations based on logical thinking processes alone. b. experimental evidence. c. reasoned explanations based on observations. d. diligent obeying of scientific laws. 27. Statements describing how nature is observed to behave consistently time after time are called scientific a. theories. b. laws. c. models. d. hypotheses. 28. A controlled experiment comparing two situations has all identical influencing factors except the a. experimental variable. b. control variable. c. inverse variable. d. direct variable. 29. In general, scientific investigations have which activities in common? a. state problem, gather data, make hypothesis, test, make conclusion b. collect observations, develop explanations, test explanations c. observe nature, reason an explanation for what is observed d. observe nature, collect data, modify data to fit scientific model 30. Quantities, or measured properties, that are capable of changing values are called a. data. b. variables. c. proportionality constants. d. dimensionless constants. 31. A proportional relationship that is represented by the symbols a ∝ 1/b represents which of the following relationships? a. direct proportion b. inverse proportion c. direct square proportion d. inverse square proportion
1-22
tiL04527_ch01_001-024.indd Page 23 7/18/08 7:53:31 AM user-s180
32. A hypothesis concerned with a specific phenomenon is found to be acceptable through many experiments over a long period of time. This hypothesis usually becomes known as a a. scientific law. b. scientific principle. c. theory. d. model. 33. A scientific law can be expressed as a. a written concept. b. an equation. c. a graph. d. all of the above. 34. The symbol ∝ has a meaning of a. “almost infinity.” b. “the change in.” c. “is proportional to.” d. “therefore.” 35. Which of the following symbols represents a measured property of the compactness of matter? a. m b. ρ c. V d. ∆ 36. A candle with a certain weight melts in an oven and the resulting weight of the wax is a. less. b. the same. c. greater. d. The answer varies. 37. An ice cube with a certain volume melts and the resulting volume of water is a. less. b. the same. c. greater. d. The answer varies. 38. Compare the density of ice to the density of water. The density of the ice is a. less. b. the same. c. greater. d. The answer varies. 39. A beverage glass is filled to the brim with ice-cold water (0°C) and ice cubes. Some of the ice cubes are floating above the water level. When the ice melts, the water in the glass will a. spill over the brim. b. stay at the same level. c. be less full than before the ice melted. 40. What is the proportional relationship between the volume of juice in a cup and the time the juice dispenser has been running? a. direct b. inverse c. square d. inverse square 41. What is the proportional relationship between the number of cookies in the cookie jar and the time you have been eating the cookies? a. direct b. inverse c. square d. inverse square
1-23
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
42. A movie projector makes a 1 m by 1 m image when projecting 1 m from a screen, a 2 m by 2 m image when projecting 2 m from the screen, and a 3 m by 3 m image when projecting 3 m from the screen. What is the proportional relationship between the distance from the screen and the area of the image? a. direct b. inverse c. square d. inverse square 43. A movie projector makes a 1 m by 1 m image when projecting 1 m from a screen, a 2 m by 2 m image when projecting 2 m from the screen, and a 3 m by 3 m image when projecting 3 m from the screen. What is the proportional relationship between the distance from the screen and the intensity of the light falling on the screen? a. direct b. inverse c. square d. inverse square 44. According to the scientific method, what needs to be done to move beyond conjecture or simple hypotheses in a person’s understanding of his or her physical surroundings? a. Make an educated guess. b. Conduct a controlled experiment. c. Find an understood model with answers. d. Search for answers on the Internet.
Answers 1. c 2. b 3. b 4. c 5. a 6. a 7. b 8. a 9. d 10. b 11. c 12. d 13. a 14. c 15. c 16. b 17. d 18. c 19. d 20. c 21. c 22. c 23. b 24. a 25. c 26. b 27. b 28. a 29. b 30. b 31. b 32. a 33. d 34. c 35. b 36. b 37. a 38. a 39. b 40. a 41. b 42. c 43. d 44. b
QUESTIONS FOR THOUGHT 1. What is a concept? 2. What are two components of a measurement statement? What does each component tell you? 3. Other than familiarity, what are the advantages of the English system of measurement? 4. Define the metric standard units for length, mass, and time. 5. Does the density of a liquid change with the shape of a container? Explain. 6. Does a flattened pancake of clay have the same density as the same clay rolled into a ball? Explain. 7. What is an equation? How are equations used in the physical sciences? 8. Compare and contrast a scientific principle and a scientific law. 9. What is a model? How are models used? 10. Are all theories always completely accepted or completely rejected? Explain.
FOR FURTHER ANALYSIS 1. Select a statement that you feel might represent pseudoscience. Write an essay supporting and refuting your selection, noting facts that support one position or the other. 2. Evaluate the statement that science cannot solve humanproduced problems such as pollution. What does it mean to CHAPTER 1
What Is Science?
23
tiL04527_ch01_001-024.indd Page 24 7/18/08 7:53:31 AM user-s180
3. 4. 5.
6. 7.
say pollution is caused by humans and can only be solved by humans? Provide evidence that supports your position. Make an experimental evaluation of what happens to the density of a substance at larger and larger volumes. If your wage were dependent on your work-time squared, how would it affect your pay if you double your hours? Merriam-Webster’s 11th Collegiate Dictionary defines science, in part, as “knowledge or a system of knowledge covering general truths or the operation of general laws especially as obtained and tested through scientific method.” How would you define science? Are there any ways in which scientific methods differ from commonsense methods of reasoning? The United States is the only country in the world that does not use the metric system of measurement. With this understanding, make a list of advantages and disadvantages for adopting the metric system in the United States.
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
helicopter in Figure 1.17. Try a preliminary flight test by standing on a chair or stairs and dropping it. Decide what variables you would like to study to find out how they influence the total flight time. Consider how you will hold everything else constant while changing one variable at a time. You can change the wing area by making new helicopters with more or less area in the A and B flaps. You can change the weight by adding more paper clips. Study these and other variables to find out who can design a helicopter that will remain in the air the longest. Who can design a helicopter that is most accurate in hitting a target?
A
B
A
B
INVITATION TO INQUIRY Paper Helicopters Construct paper helicopters and study the effects that various variables have on their flight. After considering the size you wish to test, copy the patterns shown in Figure 1.17 on a sheet of notebook paper. Note that solid lines are to be cut and dashed lines are to be folded. Make three scissor cuts on the solid lines. Fold A toward you and B away from you to form the wings. Then fold C and D inward to overlap, forming the body. Finally, fold up the bottom on the dashed line and hold it together with a paper clip. Your finished product should look like the
C
D
A
B
FIGURE 1.17
Pattern for a paper helicopter.
PARALLEL EXERCISES The exercises in groups A and B cover the same concepts. Solutions to group A exercises are located in appendix E. Note: You will need to refer to Table 1.3 to complete some of the following exercises.
Group A
Group B
1. 2. 3. 4.
What is your height in meters? In centimeters? What is the density of mercury if 20.0 cm3 has a mass of 272 g? What is the mass of a 10.0 cm3 cube of lead? What is the volume of a rock with a density of 3.00 g/cm3 and a mass of 600 g? 5. If you have 34.0 g of a 50.0 cm3 volume of one of the substances listed in Table 1.3, which one is it? 6. What is the mass of water in a 40 L aquarium?
7. A 2.1 kg pile of aluminum cans is melted, then cooled into a solid cube. What is the volume of the cube? 8. A cubic box contains 1,000 g of water. What is the length of one side of the box in meters? Explain your reasoning. 9. A loaf of bread (volume 3,000 cm3) with a density of 0.2 g/cm3 is crushed in the bottom of a grocery bag into a volume of 1,500 cm3. What is the density of the mashed bread? 10. According to Table 1.3, what volume of copper would be needed to balance a 1.00 cm3 sample of lead on a two-pan laboratory balance?
24
CHAPTER 1
What Is Science?
1. 2. 3. 4. 5. 6. 7. 8. 9.
10.
What is your mass in kilograms? In grams? What is the density of iron if 5.0 cm3 has a mass of 39.5 g? What is the mass of a 10.0 cm3 cube of copper? If ice has a density of 0.92 g/cm3, what is the volume of 5,000 g of ice? If you have 51.5 g of a 50.0 cm3 volume of one of the substances listed in Table 1.3, which one is it? What is the mass of gasoline (ρ = 0.680 g/cm3) in a 94.6 L gasoline tank? What is the volume of a 2.00 kg pile of iron cans that are melted, then cooled into a solid cube? A cubic tank holds 1,000.0 kg of water. What are the dimensions of the tank in meters? Explain your reasoning. A hot dog bun (volume 240 cm3) with a density of 0.15 g/cm3 is crushed in a picnic cooler into a volume of 195 cm3. What is the new density of the bun? According to Table 1.3, what volume of iron would be needed to balance a 1.00 cm3 sample of lead on a two-pan laboratory balance? 1-24
tiL04527_ch02_025-060.indd Page 25 7/18/08 7:53:53 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
PHYSICS
2
Motion Information about the mass of a hot air balloon and forces on the balloon will enable you to predict if it is going to move up,down,or drift across the river. This chapter is about such relationships among force, mass, and changes in motion.
CORE CONCEPT A net force is required for any change in a state of motion.
Forces Inertia is the tendency of an object to remain in unchanging motion when the net force is zero.
Newton’s First Law of Motion Every object retains its state of rest or straight-line motion unless acted upon by an unbalanced force.
Newton’s Third Law of Motion A single force does not exist by itself; there is always a matched and opposite force that occurs at the same time.
OUTLINE Describing Motion Measuring Motion Speed Velocity Acceleration Science and Society: Transportation and the Environment Forces Horizontal Motion on Land Falling Objects A Closer Look: A Bicycle Racer’s Edge Compound Motion Vertical Projectiles Horizontal Projectiles A Closer Look: Free Fall Three Laws of Motion Newton’s First Law of Motion Newton’s Second Law of Motion Weight and Mass Newton’s Third Law of Motion Momentum Conservation of Momentum Impulse Forces and Circular Motion Newton’s Law of Gravitation Earth Satellites A Closer Look: Gravity Problems Weightlessness People Behind the Science: Isaac Newton
Falling Objects The force of gravity uniformly accelerates falling objects.
Newton’s Second Law of Motion The acceleration of an object depends on the net force applied and the mass of the object.
Newton’s Law of Gravitation All objects in the universe are attracted to all other objects in the universe.
25
tiL04527_ch02_025-060.indd Page 26 7/18/08 7:53:55 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
OVERVIEW In chapter 1, you learned some “tools and rules” and some techniques for finding order in your physical surroundings. Order is often found in the form of patterns, or relationships between quantities that are expressed as equations. Recall that equations can be used to (1) describe properties, (2) define concepts, and (3) describe how quantities change relative to each other. In all three uses, patterns are quantified, conceptualized, and used to gain a general understanding about what is happening in nature. In the study of physical science, certain parts of nature are often considered and studied together for convenience. One of the more obvious groupings involves movement. Most objects around you spend a great deal of time sitting quietly without motion. Buildings, rocks, utility poles, and trees rarely, if ever, move from one place to another. Even things that do move from time to time sit still for a great deal of time. This includes you, automobiles, and bicycles (Figure 2.1). On the other hand, the Sun, the Moon, and starry heavens seem to always move, never standing still. Why do things stand still? Why do things move? Questions about motion have captured the attention of people for thousands of years. But the ancient people answered questions about motion with stories of mysticism and spirits that lived in objects. It was during the classic Greek culture, between 600 B.C. and 300 B.C., that people began to look beyond magic and spirits. One particular Greek philosopher, Aristotle, wrote a theory about the universe that offered not only explanations about things such as motion but also offered a sense of beauty, order, and perfection. The theory seemed to fit with other ideas that people had and was held to be correct for nearly two thousand years after it was written. It was not until the work of Galileo and Newton during the 1600s that a new, correct understanding about motion was developed. The development of ideas about motion is an amazing and absorbing story. You will learn in this chapter how to describe and use some properties of motion. This will provide some basic understandings about motion and will be very helpful in understanding some important aspects of astronomy and the earth sciences, as well as the movement of living things.
DESCRIBING MOTION Motion is one of the more common events in your surroundings. You can see motion in natural events such as clouds moving, rain and snow falling, and streams of water moving, all in a never-ending cycle. Motion can also be seen in the activities of people who walk, jog, or drive various machines from place to place. Motion is so common that you would think everyone would intuitively understand the concepts of motion, but history indicates that it was only during the past three hundred years or so that people began to understand motion correctly. Perhaps the correct concepts are subtle and contrary to common sense, requiring a search for simple, clear concepts in an otherwise complex situation. The process of finding such order in a multitude of sensory impressions by taking measurable data and then inventing a concept to describe what is happening is the activity called science. We will now apply this process to motion. What is motion? Consider a ball that you notice one morning in the middle of a lawn. Later in the afternoon, you notice that the ball is at the edge of the lawn, against a fence, and you wonder if the wind or some person moved the ball. You do not know if the wind blew it at a steady rate, if many gusts of wind moved it, or even if some children kicked it all over the yard. All you know for sure is that the ball has been moved because it is
26
CHAPTER 2
Motion
in a different position after some time passed. These are the two important aspects of motion: (1) a change of position and (2) the passage of time. If you did happen to see the ball rolling across the lawn in the wind, you would see more than the ball at just two locations. You would see the ball moving continuously. You could consider, however, the ball in continuous motion to be a series of individual locations with very small time intervals. Moving involves a change of position during some time period. Motion is the act or process of something changing position. The motion of an object is usually described with respect to something else that is considered to be not moving. (Such a stationary object is said to be “at rest.”) Imagine that you are traveling in an automobile with another person. You know that you are moving across the land outside the car since your location on the highway changes from one moment to another. Observing your fellow passenger, however, reveals no change of position. You are in motion relative to the highway outside the car. You are not in motion relative to your fellow passenger. Your motion, and the motion of any other object or body, is the process of a change in position relative to some reference object or location. Thus, motion can be defined as the act or process of changing position relative to some reference during a period of time. 2-2
tiL04527_ch02_025-060.indd Page 27 7/18/08 7:53:55 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Total elapsed time:
1h
2h
1h
1h
50 km
50 km
Time interval: Distance interval: Distance:
3h
50 km
100 km
150 km
FIGURE 2.2 If you know the value of any two of the three variables of distance, time, and speed, you can find the third. What is the average speed of this car? Two ways of finding the answer are in Figure 2.3.
motion. This ratio is a property of motion called speed, which is a measure of how fast you are moving. Speed is defined as distance per unit of time, or distance speed = _ time
FIGURE 2.1 The motion of this windsurfer, and of other moving objects, can be described in terms of the distance covered during a certain time period.
MEASURING MOTION You have learned that objects can be described by measuring certain fundamental properties such as mass and length. Since motion involves (1) a change of position and (2) the passage of time, the motion of objects can be described by using combinations of the fundamental properties of length and time. These combinations of measurement describe three properties of motion: speed, velocity, and acceleration.
SPEED Suppose you are in a car that is moving over a straight road. How could you describe your motion? You need at least two measurements: (1) the distance you have traveled and (2) the time that has elapsed while you covered this distance. Such a distance and time can be expressed as a ratio that describes your 2-3
The units used to describe speed are usually miles/hour (mi/h), kilometers/hour (km/h), or meters/second (m/s). Let’s go back to your car that is moving over a straight highway and imagine you are driving to cover equal distances in equal periods of time. If you use a stopwatch to measure the time required to cover the distance between highway mile markers (those little signs with numbers along major highways), the time intervals will all be equal. You might find, for example, that one minute lapses between each mile marker. Such a uniform straight-line motion that covers equal distances in equal periods of time is the simplest kind of motion. If your car were moving over equal distances in equal periods of time, it would have a constant speed (Figure 2.2). This means that the car is neither speeding up nor slowing down. It is usually difficult to maintain a constant speed. Other cars and distractions such as interesting scenery cause you to reduce your speed. At other times you increase your speed. If you calculate your speed over an entire trip, you are considering a large distance between two places and the total time that elapsed. The increases and decreases in speed would be averaged. Therefore, most speed calculations are for an average speed. The speed at any specific instant is called the instantaneous speed. To calculate the instantaneous speed, you would need to consider a very short time interval—one that approaches zero. An easier way would be to use the speedometer, which shows the speed at any instant. Constant, instantaneous, or average speeds can be measured with any distance and time units. Common units in the English system are miles/hour and feet/second. Metric units for speed are commonly kilometers/hour and meters/second. The ratio of any distance to time is usually read as distance per time, such as miles per hour. The per means “for each.” CHAPTER 2 Motion
27
tiL04527_ch02_025-060.indd Page 28 7/18/08 7:53:56 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
It is easier to study the relationships between quantities if you use symbols instead of writing out the whole word. The letter v can be used to stand for speed, the letter d can be used to stand for distance, and the letter t, to stand for time. A bar over the v (v) is a symbol that means average (it is read “v-bar” or “v-average”). The relationship between average speed, distance, and time is therefore
and the t’s on the right cancel, leaving vt = d
If the v is 50 km/h and the time traveled is 2 h, then km (2h) d = 50 _ h km (h) = (50)(2) _ h (km)(h) = 100 _ h
(
d v=_ t equation 2.1 This is one of the three types of equations that were discussed on page 10, and in this case, the equation defines a motion property. You can use this relationship to find average speed. For example, suppose a car travels 150 km in 3 h. What was the average speed? Since d = 150 km, and t = 3 h, then
d = vt
or
) ( )
= 100 km Notice how both the numerical values and the units were treated mathematically. See “How to Solve Problems” in chapter 1 for more information.
150 km v=_ 3h km = 50 _ h As with other equations, you can mathematically solve the equation for any term as long as two variables are known (Figure 2.3). For example, suppose you know the speed and the time but want to find the distance traveled. You can solve this by first writing the relationship
EXAMPLE 2.1 The driver of a car moving at 72.0 km/h drops a road map on the floor. It takes him 3.00 seconds to locate and pick up the map. How far did he travel during this time?
SOLUTION The car has a speed of 72.0 km/h and the time factor is 3.00 s, so km/h must be converted to m/s. From inside the front cover of this book, the conversion factor is 1 km/h = 0.2778 m/s, so
d v=_ t
and then multiplying both sides of the equation by t (to get d on one side by itself),
m 0.2778 _ s × 72.0 _ km v=_ km h _ h
(d)(t) (v)(t) = _ t
km h ×_ m ×_ = (0.2778)(72.0) _ s km h m = 20.0 _ s The relationship between the three variables, v, t, and d, is found in equation 2.1: v = d/t. m v = 20.0 _ s
Distance (km)
200
150
d 150 km v– 50 km/h t 3h
t = 3.00 s d =?
0
m (3.00 s) = 20.0 _ s
(
Δy 100 km slope Δx 2h 50 km/h
)
s m ×_ = (20.0)(3.00) _ s 1 = 60.0 m
0
1
2
FIGURE 2.3
3 Time (h)
Speed is distance per unit of time, which can be calculated from the equation or by finding the slope of a distance-versus-time graph. This shows both ways of finding the speed of the car shown in Figure 2.2.
28
dt vt = _ t d = vt
100
50
d v=_ t
CHAPTER 2
Motion
EXAMPLE 2.2 A bicycle has an average speed of 8.00 km/h. How far will it travel in 10.0 seconds? (Answer: 22.2 m)
2-4
tiL04527_ch02_025-060.indd Page 29 7/18/08 7:53:57 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
CONCEPTS Applied Style Speeds Observe how many different styles of walking you can identify in students walking across the campus. Identify each style with a descriptive word or phrase. Is there any relationship between any particular style of walking and the speed of walking? You could find the speed of walking by measuring a distance, such as the distance between two trees, then measuring the time required for a student to walk the distance. Find the average speed for each identified style of walking by averaging the walking speeds of ten people. Report any relationships you find between styles of walking and the average speed of people with each style. Include any problems you found in measuring, collecting data, and reaching conclusions.
CONCEPTS Applied How Fast Is a Stream? A stream is a moving body of water. How could you measure the speed of a stream? Would timing how long it takes a floating leaf to move a measured distance help? What kind of relationship, if any, would you predict for the speed of a stream and a recent rainfall? Would you predict a direct relationship? Make some measurements of stream speeds and compare your findings to recent rainfall amounts.
30 km/h east
60 km/h east
FIGURE 2.4 Here are three different velocities represented by three different arrows. The length of each arrow is proportional to the speed, and the arrowhead shows the direction of travel.
changes will result in a change of velocity. You need at least one additional measurement to describe a change of motion, which is how much time elapsed while the change was taking place. The change of velocity and time can be combined to define the rate at which the motion was changed. This rate is called acceleration. Acceleration is defined as a change of velocity per unit time, or change of velocity acceleration = __ time elapsed Another way of saying “change in velocity” is the final velocity minus the initial velocity, so the relationship can also be written as acceleration =
VELOCITY The word velocity is sometimes used interchangeably with the word speed, but there is a difference. Velocity describes the speed and direction of a moving object. For example, a speed might be described as 60 km/h. A velocity might be described as 60 km/h to the west. To produce a change in velocity, either the speed or the direction is changed (or both are changed). A satellite moving with a constant speed in a circular orbit around Earth does not have a constant velocity since its direction of movement is constantly changing. Velocity can be represented graphically with arrows. The lengths of the arrows are proportional to the magnitude, and the arrowheads indicate the direction (Figure 2.4).
60 km/h northwest
final velocity – initial velocity ___ time elapsed
Acceleration due to a change in speed only can be calculated as follows. Consider a car that is moving with a constant, straightline velocity of 60 km/h when the driver accelerates to 80 km/h. Suppose it takes 4 s to increase the velocity of 60 km/h to 80 km/h. The change in velocity is therefore 80 km/h minus 60 km/h, or 20 km/h. The acceleration was km km – 60 _ 80 _ h h acceleration = __ 4s km 20 _ h _ = 4s
km/h = 5_ s or = 5 km/h/s
ACCELERATION Motion can be changed in three different ways: (1) by changing the speed, (2) by changing the direction of travel, or (3) combining both of these by changing both the speed and direction of travel at the same time. Since velocity describes both the speed and the direction of travel, any of these three
2-5
The average acceleration of the car was 5 km/h for each (“per”) second. This is another way of saying that the velocity increases an average of 5 km/h in each second. The velocity of the car was 60 km/h when the acceleration began (initial velocity). At the end of 1 s, the velocity was 65 km/h. At the end of 2 s, it was 70 km/h; at the end of 3 s, 75 km/h; and at the end of 4 s (total
CHAPTER 2 Motion
29
tiL04527_ch02_025-060.indd Page 30 7/18/08 7:53:58 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
vf vi 70 km/h 70 km/h km/h a 0 t 4s s
Speed (km/h)
80 75
(to simplify a fraction, invert the divisor and multiply, or m/s × 1/s = m/s2). Remember that the expression 1.4 m/s2 means the same as 1.4 m/s per s, a change of velocity in a given time period. The relationship among the quantities involved in acceleration can be represented with the symbols a for average acceleration, vf for final velocity, vi for initial velocity, and t for time. The relationship is
70
a=
65
vf – vi _ t
equation 2.2
60 0
1
A
2
3
4
Time (s)
Speed (km/h)
vf vi 80 km/h 60 km/h km/h a 5 t 4s s
vf = at + vi
In problems where the initial velocity is equal to zero (starting from rest), the equation simplifies to
80
vf = at
75
Recall from chapter 1 that the symbol ∆ means “the change in” a value. Therefore, equation 2.1 for speed could be written
Δy 10 km/h slope Δx 2s 5 km/h s
70 65
∆d v=_ t and equation 2.2 for acceleration could be written
60 0
1
2
B
∆v a=_ t
3 4 Time (s)
FIGURE 2.5
(A) This graph shows how the speed changes per unit of time while driving at a constant 70 km/h in a straight line. As you can see, the speed is constant, and for straight-line motion, the acceleration is 0. (B) This graph shows the speed increasing from 60 km/h to 80 km/h for 5 s. The acceleration, or change of velocity per unit of time, can be calculated either from the equation for acceleration or by calculating the slope of the straight-line graph. Both will tell you how fast the motion is changing with time.
time elapsed), the velocity was 80 km/h (final velocity). Note how fast the velocity is changing with time. In summary, start (initial velocity) End of first second End of second second End of third second End of fourth second (final velocity)
60 km/h 65 km/h 70 km/h 75 km/h 80 km/h
As you can see, acceleration is really a description of how fast the speed is changing (Figure 2.5); in this case, it is increasing 5 km/h each second. Usually, you would want all the units to be the same, so you would convert km/h to m/s. A change in velocity of 5.0 km/h converts to 1.4 m/s and the acceleration would be 1.4 m/s/s. The units m/s per s mean what change of velocity (1.4 m/s) is occurring every second. The combination m/s/s is rather cumbersome, so it is typically treated mathematically to simplify the expression
30
As in other equations, any one of these quantities can be found if the others are known. For example, solving the equation for the final velocity, vf, yields:
CHAPTER 2
Motion
This shows that both equations are a time rate of change. Speed is a time rate change of distance. Acceleration is a time rate change of velocity. The time rate of change of something is an important concept that you will meet again in chapter 3.
EXAMPLE 2.3 A bicycle moves from rest to 5 m/s in 5 s. What was the acceleration?
SOLUTION vi = 0 m/s vf = 5 m/s t=5s a=?
v f – vi a=_ t 5 m/s – 0 m/s = __ 5s m/s 5_ =_ 5 s m =1 _ s
( ) ( _1s )
m = 1_ s2
EXAMPLE 2.4 An automobile uniformly accelerates from rest at 5 m/s2 for 6 s. What is the final velocity in m/s? (Answer: 30 m/s)
2-6
tiL04527_ch02_025-060.indd Page 31 7/18/08 7:53:58 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Science and Society Transportation and the Environment
E
nvironmental science is an interdisciplinary study of the earth’s environment. The concern of this study is the overall problem of human degradation of the environment and remedies for that damage. As an example of an environmental topic of study, consider the damage that results from current human activities involving the use of transportation. Researchers estimate that overall transportation activities are responsible for about one-third of the total U.S. carbon emissions that are added to the air every day. Carbon emissions are a problem because they are directly harmful in the form of carbon monoxide. They are also indirectly harmful because of the contribution of carbon dioxide to possible global warming and the consequences of climate change.
Here is a list of things that people might do to reduce the amount of environmental damage from transportation: A. Use a bike, carpool, walk, or take public transportation whenever possible. B. Combine trips to the store, mall, and work, leaving the car parked whenever possible. C. Purchase hybrid electric or fuel cellpowered cars or vehicles whenever possible. D. Move to a planned community that makes the use of cars less necessary and less desirable.
So far, you have learned only about straight-line, uniform acceleration that results in an increased velocity. There are also other changes in the motion of an object that are associated with acceleration. One of the more obvious is a change that results in a decreased velocity. Your car’s brakes, for example, can slow your car or bring it to a complete stop. This is negative acceleration, which is sometimes called deceleration. Another change in the motion of an object is a change of direction. Velocity encompasses both the rate of motion and direction, so a change of direction is an acceleration. The satellite moving with a constant speed in a circular orbit around Earth is constantly changing its direction of movement. It is therefore constantly accelerating because of this constant change in its motion. Your automobile has three devices that could change the state of its motion. Your automobile therefore has three accelerators—the gas pedal (which can increase magnitude of velocity), the brakes (which can decrease magnitude of velocity), and the steering wheel (which can change direction of velocity). (See Figure 2.6.) The important thing to remember is that acceleration results from any change in the motion of an object. The final velocity (vf ) and the initial velocity (vi) are different variables than the average velocity (v). You cannot use an initial or final velocity for an average velocity. You may, however, calculate an average velocity (v) from the other two variables as long as the acceleration taking place between the initial and final velocities is uniform. An example of such a uniform change would be an automobile during a constant, 2-7
30 mi/h
QUESTIONS TO DISCUSS Discuss with your group the following questions concerning connections between thought and feeling: 1. What are your positive or negative feelings associated with each item in the list? 2. Would your feelings be different if you had a better understanding of the global problem? 3. Do your feelings mean that you have reached a conclusion? 4. What new items could be added to the list?
60 mi/h
A Constant direction increase speed
60 mi/h
30 mi/h
B Constant direction decrease speed
30 mi/h
30 mi/h
30 mi/h
60 mi/h
C Change direction constant speed
FIGURE 2.6
D Change direction change speed
Four different ways (A–D) to accelerate a car.
straight-line acceleration. To find an average velocity during a uniform acceleration, you add the initial velocity and the final velocity and divide by 2. This averaging can be done for a uniform acceleration that is increasing the velocity or for one that is decreasing the velocity. In symbols, vf + vi v=_ 2 equation 2.3 CHAPTER 2 Motion
31
tiL04527_ch02_025-060.indd Page 32 7/18/08 7:53:59 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
EXAMPLE 2.5 An automobile moving at 25.0 m/s comes to a stop in 10.0 s when the driver slams on the brakes. How far did the car travel while stopping?
SOLUTION The car has an initial velocity of 25.0 m/s (vi) and the final velocity of 0 m/s (vf ) is implied. The time of 10.0 s (t) is given. The problem asked for the distance (d). The relationship given between v, t, and d is given in equation 2.1, v = d/t, which can be solved for d. The average velocity (v), however, is not given but can be found from equation 2.3, vf + vi v=_ 2 vi = 25.0 m/s vf = 0 m/s t = 10.0 s v− = ? d=?
d v=_ t
∴
Since v− =
d = v·t vf + vi _ , 2
you can substitute d= =
v +v for v, and (_ 2 ) f
i
v +v (t) (_ 2 ) f
i
m + 25.0 _ m 0_ s s
( __ ) 2
(10.0 s)
m ×s = 12.5 × 10.0 _ s m·s = 125 _ s = 125 m
EXAMPLE 2.6 What was the deceleration of the automobile in example 2.5? (Answer: –2.50 m/s2)
CONCEPTS Applied Acceleration Patterns Suppose the radiator in your car has a leak and drops of fluid fall constantly, one every second. What pattern would the drops make on the pavement when you accelerate the car from a stoplight? What pattern would they make when you drive at a constant speed? What pattern would you observe as the car comes to a stop? Use a marker to make dots on a sheet of paper that illustrate (1) acceleration, (2) constant speed, and (3) negative acceleration. Use words to describe the acceleration in each situation.
FORCES The Greek philosopher Aristotle considered some of the first ideas about the causes of motion back in the fourth century b.c. However, he had it all wrong when he reportedly stated that a dropped object falls at a constant speed that is determined by its weight. He also incorrectly thought that an
32
CHAPTER 2
Motion
object moving across Earth’s surface requires a continuously applied force in order to continue moving. These ideas were based on observing and thinking, not measurement, and no one checked to see if they were correct. It would take about two thousand years before people began to correctly understand motion. Aristotle did recognize an association between force and motion, and this much was acceptable. It is partly correct because a force is closely associated with any change of motion, as you will see. This section introduces the concept of a force, which will be developed more fully when the relationship between forces and motion is considered. A force is a push or a pull that is acting on an object. Consider, for example, the movement of a ship from the pushing of two tugboats (Figure 2.7). Tugboats can vary the strength of the force exerted on a ship, but they can also push in different directions. What effect does direction have on two forces acting on an object? If the tugboats were side by side, pushing in the same direction, the overall force is the sum of the two forces. If they act in exactly opposite directions, one pushing on each side of the ship, the overall force is the difference between the strength of the two forces. If they have the same strength, the overall effect is to cancel each other without producing any motion. The net force is the sum of all the forces acting on an object. Net force means “final,” after the forces are added (Figure 2.8). When two parallel forces act in the same direction, they can be simply added. In this case, there is a net force that is equivalent to the sum of the two forces. When two parallel forces act in opposite directions, the net force is the difference in the direction of the larger force. When two forces act neither in a way that is exactly together nor exactly opposite each other, the result will be like a new, different net force having a new direction and strength. Forces have a strength and direction that can be represented by force arrows. The tail of the arrow is placed on the object that feels the force, and the arrowhead points in the direction in which the force is exerted. The length of the arrow is proportional to the strength of the force. The use of force arrows helps you visualize and understand all the forces and how they contribute to the net force. There are four fundamental forces that cannot be explained in terms of any other force. They are the gravitational, electromagnetic, weak, and strong nuclear forces. Gravitational forces act between all objects in the universe—between you and Earth, between Earth and the Sun, between the planets in the solar systems, and, in fact, hold stars in large groups called galaxies. Switching scales from the very large galaxy to inside an atom, we find electromagnetic forces acting between electrically charged parts of atoms, such as electrons and protons. Electromagnetic forces are responsible for the structure of atoms, chemical change, and electricity and magnetism. Weak and strong forces act inside the nucleus of an atom, so they are not as easily observed at work as are gravitational and electromagnetic forces. The weak force is involved in certain nuclear reactions. The strong nuclear force is involved in close-range holding of the nucleus together. In 2-8
tiL04527_ch02_025-060.indd Page 33 7/21/08 12:21:40 PM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
FIGURE 2.7 The rate of movement and the direction of movement of this ship are determined by a combination of direction and size of force from each of the tugboats. Which direction are the two tugboats pushing? What evidence would indicate that one tugboat is pushing with a greater force? If the tugboat by the numbers is pushing with a greater force and the back tugboat is keeping the back of the ship from moving, what will happen?
Forces Applied
Net Force
1,000 units east
Net = 2,000 units east
1,000 units east
A 1,000 units east
Net = 0 units
1,000 units west
B 1,000 units east
Net = 1,000 units west
2,000 units west
C
FIGURE 2.8
(A) When two parallel forces are acting on the ship in the same direction, the net force is the two forces added together. (B) When two forces are opposite and of equal size, the net force is zero. (C) When two parallel forces in opposite directions are not of equal size, the net force is the difference in the direction of the larger force.
2-9
CHAPTER 2 Motion
33
tiL04527_ch02_025-060.indd Page 34 7/18/08 7:54:01 AM user-s180
general, the strong nuclear force between particles inside a nucleus is about 102 times stronger than the electromagnetic force and about 1039 times stronger than the gravitation force. The fundamental forces are responsible for everything that happens in the universe, and we will learn more about them in chapters on electricity, light, nuclear energy, chemistry, geology, and astronomy.
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Direction of motion
34
CHAPTER 2
Motion
Fair Ffloor
Fair
A
HORIZONTAL MOTION ON LAND Everyday experience seems to indicate that Aristotle’s idea about horizontal motion on Earth’s surface is correct. After all, moving objects that are not pushed or pulled do come to rest in a short period of time. It would seem that an object keeps moving only if a force continues to push it. A moving automobile will slow and come to rest if you turn off the ignition. Likewise, a ball that you roll along the floor will slow until it comes to rest. Is the natural state of an object to be at rest, and is a force necessary to keep an object in motion? This is exactly what people thought until Galileo published his book Two New Sciences in 1638, which described his findings about motion. The book had three parts that dealt with uniform motion, accelerated motion, and projectile motion. Galileo described details of simple experiments, measurements, calculations, and thought experiments as he developed definitions and concepts of motion. In one of his thought experiments, Galileo presented an argument against Aristotle’s view that a force is needed to keep an object in motion. Galileo imagined an object (such as a ball) moving over a horizontal surface without the force of friction. He concluded that the object would move forever with a constant velocity as long as there was no unbalanced force acting to change the motion. Why does a rolling ball slow to a stop? You know that a ball will roll farther across a smooth, waxed floor such as a bowling lane than it will across a floor covered with carpet. The rough carpet offers more resistance to the rolling ball. The resistance of the floor friction is shown by a force arrow, Ffloor, in Figure 2.9. This force, along with the force arrow for air resistance, Fair, opposes the forward movement of the ball. Notice the dashed line arrow in part A of Figure 2.9. There is no other force applied to the ball, so the rolling speed decreases until the ball finally comes to a complete stop. Now imagine what force you would need to exert by pushing with your hand, moving along with the ball to keep it rolling at a uniform rate. An examination of the forces in part B of Figure 2.9 can help you determine the amount of force. The force you apply, Fapplied, must counteract the resistance forces. It opposes the forces that are slowing down the ball as illustrated by the direction of the arrows. To determine how much force you should apply, look at the arrow equation. Fapplied has the same length as the sum of the two resistance forces, but it is in the opposite direction of the resistance forces. Therefore, the overall force, Fnet, is zero. The ball continues to roll at a uniform rate when you balance the force opposing its motion. It is reasonable, then, that if there were no opposing forces, you would not need to apply a force
Forces opposing motion
Fapplied = 0
+
Ffloor
Fnet
=
Forces opposing motion
Fapplied Fair
Ffloor B
Fair
+
Ffloor
+
Fapplied
= Fnet = 0
FIGURE 2.9
The following focus in on horizontal forces only: (A) This ball is rolling to your left with no forces in the direction of motion. The sum of the force of floor friction (Ffloor) and the force of air friction (Fair) results in a net force opposing the motion, so the ball slows to a stop. (B) A force is applied to the moving ball, perhaps by a hand that moves along with the ball. The force applied (Fapplied) equals the sum of the forces opposing the motion, so the ball continues to move with a constant velocity.
to keep it rolling. This was the kind of reasoning that Galileo did when he discredited the Aristotelian view that a force was necessary to keep an object moving. Galileo concluded that a moving object would continue moving with a constant velocity if no unbalanced forces were applied, that is, if the net force were zero. It could be argued that the difference in Aristotle’s and Galileo’s views of forced motion is really a degree of analysis. After all, moving objects on Earth do come to rest unless continuously pushed or pulled. But Galileo’s conclusion describes why they must be pushed or pulled and reveals the true nature of the motion of objects. Aristotle argued that the natural state of objects is to be at rest, and he tried to explain why objects move. Galileo, on the other hand, argued that it is just as natural for objects to be moving, and he tried to explain why they come to rest. Galileo called the behavior of matter that causes it to persist in its state of motion inertia. Inertia is the tendency of an object to remain in unchanging motion whether actually at rest or moving in the absence of an unbalanced force (friction, gravity, or whatever). The development of this concept changed the way people viewed the natural state of an object and opened the way for further understandings about motion. Today, it is understood that a spacecraft moving through free space will continue to do so with no unbalanced forces acting on it (Figure 2.10A). An unbalanced force is needed to slow the spacecraft (Figure 2.10B), increase its speed (Figure 2.10C), or change its direction of travel (Figure 2.10D). 2-10
tiL04527_ch02_025-060.indd Page 35 7/18/08 7:54:01 AM user-s180
A
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Myths, Mistakes, & Misunderstandings Walk or Run in Rain?
B
Is it a mistake to run in rain if you want to stay drier? One idea is that you should run because you spend less time in the rain, so you will stay drier. On the other hand, this is true only if the rain lands on the top of your head and shoulders. If you run, you will end up running into more raindrops on the larger surface area of your face, chest, and front of your legs. Two North Carolina researchers looked into this question with one walking and the other running over a measured distance while wearing cotton sweatsuits. They then weighed their clothing and found that the walking person’s sweatsuit weighed more. This means you should run to stay drier.
FALLING OBJECTS
C
D
Did you ever wonder what happens to a falling rock during its fall? Aristotle reportedly thought that a rock falls at a uniform speed that is proportional to its weight. Thus, a heavy rock would fall at a faster uniform speed than a lighter rock. As stated in a popular story, Galileo discredited Aristotle’s conclusion by dropping a solid iron ball and a solid wooden ball simultaneously from the top of the Leaning Tower of Pisa (Figure 2.11). Both balls, according to the story, hit the ground nearly at the same time. To do this, they would have to fall with the same velocity. In other words, the velocity of a falling object does not depend on its weight. Any difference in freely falling bodies is explainable by air resistance. Soon after the time of Galileo, the air pump was invented. The air pump could be used to remove the air from a glass tube. The effect of air resistance on falling objects could then be demonstrated by comparing how objects fall in the air with how they fall in an evacuated glass tube. You know that a coin falls faster than a feather when they are dropped together in the air. A feather and heavy coin will fall together in the near vacuum of an evacuated glass tube because the effect
FIGURE 2.10
Examine the four illustrations and explain how together they illustrate inertia.
FIGURE 2.11
According to a widespread story, Galileo dropped two objects with different weights from the Leaning Tower of Pisa. They reportedly hit the ground at about the same time, discrediting Aristotle’s view that the speed during the fall is proportional to weight.
2-11
CHAPTER 2 Motion
35
tiL04527_ch02_025-060.indd Page 36 7/18/08 7:54:02 AM user-s180
of air resistance on the feather has been removed. When objects fall toward Earth without considering air resistance, they are said to be in free fall. Free fall considers only gravity and neglects air resistance.
CONCEPTS Applied
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Substituting this equation in the rearranged equation 2.1, the distance relationship becomes d=
v +v (t) (_ 2 )
d=
1. Take a sheet of paper and your textbook and drop them side by side from the same height. Note the result. 2. Place the sheet of paper on top of the book and drop them at the same time. Do they fall together? 3. Crumple the sheet of paper into a loose ball and drop the ball and book side by side from the same height. 4. Crumple a sheet of paper into a very tight ball and again drop the ball and book side by side from the same height.
( _v2 ) (t) f
Step 4: Now you want to get acceleration into the equation in place of velocity. This can be done by solving equation 2.2 for the final velocity (vf ), then substituting. The initial velocity (vi) is again eliminated because it equals zero. vf – vi a=_ t vf = at at (t) d= _ 2
( )
Step 5: Simplifying, the equation becomes 1 at2 d=_ 2
Explain any evidence you found concerning how objects fall.
Galileo concluded that light and heavy objects fall together in free fall, but he also wanted to know the details of what was going on while they fell. He now knew that the velocity of an object in free fall was not proportional to the weight of the object. He observed that the velocity of an object in free fall increased as the object fell and reasoned from this that the velocity of the falling object would have to be (1) somehow proportional to the time of fall and (2) somehow proportional to the distance the object fell. If the time and distance were both related to the velocity of a falling object at a given time and distance, how were they related to one another? To answer this question, Galileo made calculations involving distance, velocity, and time and, in fact, introduced the concept of acceleration. The relationships between these variables are found in the same three equations that you have already learned. Let’s see how the equations can be rearranged to incorporate acceleration, distance, and time for an object in free fall.
i
Step 3: The initial velocity of a falling object is always zero just as it is dropped, so the vi can be eliminated,
Falling Bodies Galileo concluded that all objects fall together, with the same acceleration, when the upward force of air resistance is removed. It would be most difficult to remove air from the room, but it is possible to do some experiments that provide some evidence of how air influences falling objects.
f
equation 2.4 Thus, Galileo reasoned that a freely falling object should cover a distance proportional to the square of the time of the fall (d ∝ t2). In other words the object should fall 4 times as far in 2 s as in 1 s (22 = 4), 9 times as far in 3 s (32 = 9), and so on. Compare this prediction with Figure 2.12.
4.9 m in 1 s
19.6 m in 2 s (22 = 4: 4 × 4.9 = 19.6)
44.1 m in 3 s (32 = 9: 9 × 4.9 = 44.1)
78.4 m in 4 s (42 = 16: 16 × 4.9 = 78.4)
Step 1: Equation 2.1 gives a relationship between average velocity (v), distance (d), and time (t). Solving this equation for distance gives d = vt Step 2: An object in free fall should have uniformly accelerated motion, so the average velocity could be calculated from equation 2.3, vf + vi v=_ 2
36
CHAPTER 2
Motion
FIGURE 2.12
An object dropped from a tall building covers increasing distances with every successive second of falling. The distance covered is proportional to the square of the time of falling (d ∝ t 2).
2-12
tiL04527_ch02_025-060.indd Page 37 7/18/08 7:54:02 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
A Closer Look A Bicycle Racer’s Edge
G
alileo was one of the first to recognize the role of friction in opposing motion. As shown in Figure 2.9, friction with the surface and air friction combine to produce a net force that works against anything that is moving on the surface. This article is about air friction and some techniques that bike riders use to reduce that opposing force— perhaps giving them an edge in a close race. The bike riders in Box Figure 2.1 are forming a single-file line, called a paceline, because the slipstream reduces the air resistance for a closely trailing rider. Cyclists say that riding in the slipstream of another cyclist will save much of their energy. They can move up to 5 mi/h faster than they would expending the same energy riding alone. In a sense, riding in a slipstream means that you do not have to push as much air out of your way. It has been estimated that at 20 mi/h, a cyclist must move a little less than half a ton of air out of the way every minute. Along with the problem of moving air out of the way, there are two basic factors related to air resistance. These are (1) a
BOX FIGURE 2.1 The object of the race is to be in the front, to finish first. If this is true, why are these racers forming a singlefile line?
turbulent versus a smooth flow of air and (2) the problem of frictional drag. A turbulent flow of air contributes to air resistance because it causes the air to separate slightly on the back side, which increases the pressure on the front of the moving object. This is why racing cars, airplanes, boats, and other racing vehicles are streamlined to a teardroplike shape. This shape is not as
Galileo checked this calculation by rolling balls on an inclined board with a smooth groove in it. He used the inclined board to slow the motion of descent in order to measure the distance and time relationships, a necessary requirement since he lacked the accurate timing devices that exist today. He found, as predicted, that the falling balls moved through a distance proportional to the square of the time of falling. This also means that the velocity of the falling object increased at a constant rate, as shown in Figure 2.13. Recall that a change of velocity during some time period is called acceleration. In other words, a falling object accelerates toward the surface of Earth. Since the velocity of a falling object increases at a constant rate, this must mean that falling objects are uniformly accelerated by the force of gravity. All objects in free fall experience a constant acceleration. During each second of fall, the object on Earth gains 9.8 m/s (32 ft/s) in velocity. This gain is the acceleration of the falling object, 9.8 m/s2 (32 ft/s2). The acceleration of objects falling toward Earth varies slightly from place to place on the surface because of Earth’s shape and spin. The acceleration of falling objects decreases from the poles to the equator and also varies from place to place because Earth’s mass is not distributed equally. The value of 9.8 m/s2 (32 ft/s2) is an approximation that is fairly close to, but not 2-13
likely to have the lower-pressure-producing air turbulence behind (and resulting greater pressure in front) because it smoothes, or streamlines, the air flow. The frictional drag of air is similar to the frictional drag that occurs when you push a book across a rough tabletop. You know that smoothing the rough tabletop will reduce the frictional drag on the book. Likewise, the smoothing of a surface exposed to moving air will reduce air friction. Cyclists accomplish this “smoothing” by wearing smooth Lycra clothing and by shaving hair from arm and leg surfaces that are exposed to moving air. Each hair contributes to the overall frictional drag, and removal of the arm and leg hair can thus result in seconds saved. This might provide enough of an edge to win a close race. Shaving legs and arms, together with the wearing of Lycra or some other tight, smooth-fitting garments, are just a few of the things a cyclist can do to gain an edge. Perhaps you will be able to think of more ways to reduce the forces that oppose motion.
9.8 m/s in 1 s
19.6 m/s in 2 s
29.4 m/s in 3 s
39.2 m/s in 4 s
FIGURE 2.13
The velocity of a falling object increases at a constant rate, 9.8 m/s2. CHAPTER 2 Motion
37
tiL04527_ch02_025-060.indd Page 38 7/18/08 7:54:03 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
exactly, the acceleration due to gravity in any particular location. The acceleration due to gravity is important in a number of situations, so the acceleration from this force is given a special symbol, g.
EXAMPLE 2.7 A rock that is dropped into a well hits the water in 3.0 s. Ignoring air resistance, how far is it to the water?
SOLUTION 1 The problem concerns a rock in free fall. The time of fall (t) is given, and the problem asks for a distance (d). Since the rock is in free fall, the acceleration due to the force of gravity (g) is implied. The metric value and unit for g is 9.8 m/s2, and the English value and unit is 32 ft/s2. You would use the metric g to obtain an answer in meters and the English unit to obtain an answer in feet. Equation 2.4, d = 1/2 at2, gives a relationship between distance (d), time (t), and average acceleration (a). The acceleration in this case is the acceleration due to gravity (g), so t = 3.0 s g = 9.8 m/s2 d=?
1 gt2(a = g = 9.8 m/s2) d=_ 2 1 (9.8 m/s2)(3.0 s)2 d=_ 2 = (4.9 m/s2)(9.0 s2) 2
m·s = 44 _ s2 = 44 m
SOLUTION 2 You could do each step separately. Check this solution by a three-step procedure: 1. Find the final velocity, vf, of the rock from vf = at;
FIGURE 2.14
High-speed, multiflash photograph of a freely
falling billiard ball.
some angle between the vertical and the horizontal. Basic to understanding such compound motion is the observation that (1) gravity acts on objects at all times, no matter where they are, and (2) the acceleration due to gravity (g) is independent of any motion that an object may have.
2. Calculate the average velocity (v) from the final velocity v f + vi v− = _ 2 then; 3. Use the average velocity (v−) and the time (t) to find distance (d), d = v− t. Note that the one-step procedure is preferred over the three-step procedure because fewer steps mean fewer possibilities for mistakes.
COMPOUND MOTION So far we have considered two types of motion: (1) the horizontal, straight-line motion of objects moving on the surface of Earth and (2) the vertical motion of dropped objects that accelerate toward the surface of Earth. A third type of motion occurs when an object is thrown, or projected, into the air. Essentially, such a projectile (rock, football, bullet, golf ball, or whatever) could be directed straight upward as a vertical projection, directed straight out as a horizontal projection, or directed at
38
CHAPTER 2
Motion
VERTICAL PROJECTILES Consider first a ball that you throw straight upward, a vertical projection. The ball has an initial velocity but then reaches a maximum height, stops for an instant, then accelerates back toward Earth. Gravity is acting on the ball throughout its climb, stop, and fall. As it is climbing, the force of gravity is continually reducing its velocity. The overall effect during the climb is deceleration, which continues to slow the ball until the instantaneous stop. The ball then accelerates back to the surface just like a ball that has been dropped (Figure 2.14). If it were not for air resistance, the ball would return with the same speed in the opposite direction that it had initially. The velocity arrows for a ball thrown straight up are shown in Figure 2.15.
HORIZONTAL PROJECTILES Horizontal projectiles are easier to understand if you split the complete motion into vertical and horizontal parts. Consider, for example, an arrow shot horizontally from a bow. The force of gravity accelerates the arrow downward, giving it an increasing downward velocity as it moves through the air. This increasing 2-14
tiL04527_ch02_025-060.indd Page 39 7/18/08 7:54:04 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
A Closer Look Free Fall
T
here are two different meanings for the term free fall. In physics, free fall means the unconstrained motion of a body in a gravitational field, without considering air resistance. Without air resistance, all objects are assumed to accelerate toward the surface at 9.8 m/s2. In the sport of skydiving, free fall means falling within the atmosphere without a drag-producing device such as a parachute. Air provides a resisting force that opposes the motion of a falling object, and the net force is the difference between the downward force (weight) and the upward force of air resistance. The weight of the falling object depends on the mass and acceleration from gravity, and this is the force down-
ward. The resisting force is determined by at least two variables: (1) the area of the object exposed to the airstream and (2) the speed of the falling object. Other variables such as streamlining, air temperature, and turbulence play a role, but the greatest effect seems to be from exposed area and the increased resistance as speed increases. A skydiver’s weight is constant, so the downward force is constant. Modern skydivers typically free-fall from about 3,650 m (about 12,000 ft) above the ground until about 750 m (about 2,500 ft), where they open their parachutes. After jumping from the plane, the diver at first accelerates toward the surface, reaching speeds up to about 185 to 210 km/h (about 115 to
v=0
v = max
FIGURE 2.15
On its way up, a vertical projectile is slowed by the force of gravity until an instantaneous stop; then it accelerates back to the surface, just as another ball does when dropped from the same height. The straight up and down moving ball has been moved to the side in the sketch so we can see more clearly what is happening. Note that the falling ball has the same speed in the opposite direction that it had on the way up.
2-15
130 mi/h). The air resistance increases with increased speed and the net force becomes less and less. Eventually, the downward weight force will be balanced by the upward air resistance force, and the net force becomes zero. The person now falls at a constant speed, and we say the terminal velocity has been reached. It is possible to change your body position to vary your rate of fall up or down to 32 km/h (about 20 mi/h). However, by diving or “standing up” in free fall, experienced skydivers can reach speeds of up to 290 km/h (about 180 mi/h). The record free fall speed, done without any special equipment, is 517 km/h (about 321 mi/h). Once the parachute opens, a descent rate of about 16 km/h (about 10 mi/h) is typical.
downward velocity is shown in Figure 2.16 as increasingly longer velocity arrows (vv). There are no forces in the horizontal direction if you can ignore air resistance, so the horizontal velocity of the arrow remains the same, as shown by the vh velocity arrows. The combination of the increasing vertical (vv) motion and the unchanging horizontal (vh) motion causes the arrow to follow a curved path until it hits the ground. An interesting prediction that can be made from the shot arrow analysis is that an arrow shot horizontally from a bow will hit the ground at the same time as a second arrow that is simply dropped from the same height (Figure 2.16). Would this be true of a bullet dropped at the same time as one fired horizontally from a rifle? The answer is yes; both bullets would hit the ground at the same time. Indeed, without air resistance, all the bullets and arrows should hit the ground at the same time if dropped or shot from the same height. Golf balls, footballs, and baseballs are usually projected upward at some angle to the horizon. The horizontal motion of these projectiles is constant as before because there are no horizontal forces involved. The vertical motion is the same as that of a ball projected directly upward. The combination of these two motions causes the projectile to follow a curved path called a parabola, as shown in Figure 2.17. The next time you have the opportunity, observe the path of a ball that has been projected at some angle. Note that the second half of the path is almost a reverse copy of the first half. If it were not for air resistance, the two values of the path would be exactly the same. Also note the distance that the ball travels as compared to the angle of projection. An angle of projection of 45° results in the maximum distance of travel if air resistance is ignored and if the launch point and the landing are at the same elevation. CHAPTER 2 Motion
39
tiL04527_ch02_025-060.indd Page 40 7/18/08 7:54:05 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
vh vv
vh
vv
vh
vv
vv vv
vv
FIGURE 2.16
A horizontal projectile has the same horizontal velocity throughout the fall as it accelerates toward the surface, with the combined effect resulting in a curved path. Neglecting air resistance, an arrow shot horizontally will strike the ground at the same time as one dropped from the same height above the ground, as shown here by the increasing vertical velocity arrows.
THREE LAWS OF MOTION
FIGURE 2.17
A football is thrown at some angle to the horizon when it is passed downfield. Neglecting air resistance, the horizontal velocity is a constant, and the vertical velocity decreases, then increases, just as in the case of a vertical projectile. The combined motion produces a parabolic path. Contrary to statements by sportscasters about the abilities of certain professional quarterbacks, it is impossible to throw a football with a “flat trajectory” because it begins to accelerate toward the surface as soon as it leaves the quarterback’s hand.
40
CHAPTER 2
Motion
In the previous sections, you learned how to describe motion in terms of distance, time, velocity, and acceleration. In addition, you learned about different kinds of motion, such as straightline motion, the motion of falling objects, and the compound motion of objects projected up from the surface of Earth. You were also introduced, in general, to two concepts closely associated with motion: (1) that objects have inertia, a tendency to resist a change in motion and (2) that forces are involved in a change of motion. The relationship between forces and a change of motion is obvious in many everyday situations (Figure 2.18). When a car, bus, or plane starts moving, you feel a force on your back. Likewise, you feel a force on the bottoms of your feet when an elevator starts moving upward. On the other hand, you seem to be forced toward the dashboard if a car stops quickly, and it feels as if the floor pulls away from your feet when an elevator drops rapidly. These examples all involve patterns between forces and motion, patterns that can be quantified, conceptualized, 2-16
tiL04527_ch02_025-060.indd Page 41 7/18/08 7:54:05 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Original position at rest
A
Original straight-line motion Force by bus changes your motion
FIGURE 2.18
In a moving airplane, you feel forces in many directions when the plane changes its motion. You cannot help but notice the forces involved when there is a change of motion. B
and used to answer questions about why things move or stand still. These patterns are the subject of Newton’s three laws of motion.
NEWTON’S FIRST LAW OF MOTION Newton’s first law of motion is also known as the law of inertia and is very similar to one of Galileo’s findings about motion. Recall that Galileo used the term inertia to describe the tendency of an object to resist changes in motion. Newton’s first law describes this tendency more directly. In modern terms (not Newton’s words), the first law of motion is as follows: Every object retains its state of rest or its state of uniform straight-line motion unless acted upon by an unbalanced force.
This means that an object at rest will remain at rest unless it is put into motion by an unbalanced force; that is, the net force must be greater than zero. Likewise, an object moving with uniform straight-line motion will retain that motion unless a net force causes it to speed up, slow down, or change its direction of travel. Thus, Newton’s first law describes the tendency of an object to resist any change in its state of motion. Think of Newton’s first law of motion when you ride standing in the aisle of a bus. The bus begins to move, and you, being an independent mass, tend to remain at rest. You take a few steps back as you tend to maintain your position relative to the ground outside. You reach for a seat back or some part of the bus. Once you have a hold on some part of the bus, it supplies the forces needed to give you the same motion as the bus and you no longer find it necessary to step backward. You now have the same motion as the bus, and no forces are involved, at least until the bus goes around a curve. You now feel a tendency to move to the side of the bus. The bus has changed its straightline motion, but you, again being an independent mass, tend to move straight ahead. The side of the seat forces you into following the curved motion of the bus. The forces you feel 2-17
FIGURE 2.19
Top view of a person standing in the aisle of a bus. (A) The bus is at rest and then starts to move forward. Inertia causes the person to remain in the original position, appearing to fall backward. (B) The bus turns to the right, but inertia causes the person to retain the original straight-line motion until forced in a new direction by the side of the bus.
when the bus starts moving or turning are a result of your tendency to remain at rest or follow a straight path until forces correct your motion so that it is the same as that of the bus (Figure 2.19).
CONCEPTS Applied First Law Experiment Place a small ball on a flat part of the floor in a car, SUV, or pickup truck. First, predict what will happen to the ball in each of the following situations: (1) The vehicle moves forward from a stopped position. (2) The vehicle is moving at a constant speed. (3) The vehicle is moving at a constant speed, then turns to the right. (4) The vehicle is moving at a constant speed, then comes to a stop. Now, test your predictions, and then explain each finding in terms of Newton’s first law of motion.
NEWTON’S SECOND LAW OF MOTION Newton had successfully used Galileo’s ideas to describe the nature of motion. Newton’s first law of motion explains that any object, once started in motion, will continue with a constant velocity in a straight line unless a force acts on the moving object. This law not only describes motion but establishes the role of a force as well. A change of motion is therefore evidence of the action of net force. The association of forces and CHAPTER 2 Motion
41
tiL04527_ch02_025-060.indd Page 42 7/18/08 7:54:06 AM user-s180
a change of motion is common in your everyday experience. You have felt forces on your back in an accelerating automobile, and you have felt other forces as the automobile turns or stops. You have also learned about gravitational forces that accelerate objects toward the surface of Earth. Unbalanced forces and acceleration are involved in any change of motion. Newton’s second law of motion is a relationship between net force, acceleration, and mass that describes the cause of a change of motion. Consider the motion of you and a bicycle you are riding. Suppose you are riding your bicycle over level ground in a straight line at 10 miles per hour. Newton’s first law tells you that you will continue with a constant velocity in a straight line as long as no external, unbalanced force acts on you and the bicycle. The force that you are exerting on the pedals seems to equal some external force that moves you and the bicycle along (more on this later). The force exerted as you move along is needed to balance the resisting forces of tire friction and air resistance. If these resisting forces were removed, you would not need to exert any force at all to continue moving at a constant velocity. The net force is thus the force you are applying minus the forces from tire friction and air resistance. The net force is therefore zero when you move at a constant speed in a straight line (Figure 2.20). If you now apply a greater force on the pedals, the extra force you apply is unbalanced by friction and air resistance. Hence, there will be a net force greater than zero, and you will accelerate. You will accelerate during, and only during, the time that the net force is greater than zero. Likewise, you will slow down if you apply a force to the brakes, another kind of resisting friction. A third way to change your velocity is to apply a force on the handlebars, changing the direction of your velocity. Thus, unbalanced forces on you and your bicycle produce an acceleration. Starting a bicycle from rest suggests a relationship between force and acceleration. You observe that the harder you push on the pedals, the greater your acceleration. Recall that when quantities increase or decrease together in the same ratio, they
F2
F1 F1
= Fnet = 0 Fa
FIGURE 2.20
At a constant velocity, the force of tire friction (F1) and the force of air resistance (F2) have a sum that equals the force applied (Fa). The net force is therefore 0.
42
CHAPTER 2
Motion
FIGURE 2.21
More mass results in less acceleration when the same force is applied. With the same force applied, the riders and bike with twice the mass will have half the acceleration, with all other factors constant. Note that the second rider is not pedaling.
are said to be directly proportional. The acceleration is therefore directly proportional to the net force applied. Suppose that your bicycle has two seats, and you have a friend who will ride with you but not pedal. Suppose also that the addition of your friend on the bicycle will double the mass of the bike and riders. If you use the same net force as before, the bicycle will undergo a much smaller acceleration. In fact, with all other factors equal, doubling the mass and applying the same extra force will produce an acceleration of only half as much (Figure 2.21). An even more massive friend would reduce the acceleration even more. Recall that when a relationship between two quantities shows that one quantity increases as another decreases, in the same ratio, the quantities are said to be inversely proportional. The acceleration of an object is therefore inversely proportional to its mass. If we express force in appropriate units, we can combine these relationships as an equation, F a=_ m
Fa F2
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
By solving for F, we rearrange the equation into the form in which it is most often expressed, F = ma equation 2.5 2-18
tiL04527_ch02_025-060.indd Page 43 7/18/08 7:54:06 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
In the metric system, you can see that the units for force will be the units for mass (m) times acceleration (a). The unit for mass is kg and the unit for acceleration is m/s2. The combination of these units, (kg)(m/s2), is a unit of force called the newton (N) in honor of Isaac Newton. So,
EXAMPLE 2.9
kg·m 1 newton = 1N = 1 _ s2
What is the acceleration of a 20 kg cart if the net force on it is 40 N? (Answer: 2 m/s2)
Newton’s second law of motion is the essential idea of his work on motion. According to this law, there is always a relationship between the acceleration, a net force, and the mass of an object. Implicit in this statement are three understandings: (1) that we are talking about the net force, meaning total external force acting on an object, (2) that the motion statement is concerned with acceleration, not velocity, and (3) that the mass does not change unless specified. The acceleration of an object depends on both the net force applied and the mass of the object. The second law of motion is as follows: The acceleration of an object is directly proportional to the net force acting on it and inversely proportional to the mass of the object.
Until now, equations were used to describe properties of matter such as density, velocity, and acceleration. This is your first example of an equation that is used to define a concept, specifically the concept of what is meant by a force. Since the concept is defined by specifying a measurement procedure, it is also an example of an operational definition. You are told not only what a newton of force is but also how to go about measuring it. Notice that the newton is defined in terms of mass measured in kg and acceleration measured in m/s2. Any other units must be converted to kg and m/s2 before a problem can be solved for newtons of force.
EXAMPLE 2.8 A 60 kg bicycle and rider accelerate at 0.5 m/s2. How much extra force was applied?
SOLUTION The mass (m) of 60 kg and the acceleration (a) of 0.5 m/s2 are given. The problem asked for the extra force (F) needed to give the mass the acquired acceleration. The relationship is found in equation 2.5, F = ma. m = 60 kg m a = 0.5 _ s2 F=?
F = ma m = (60kg) 0.5 _2 s
(
= (60)(0.5)(kg) kg.m = 30 _ s2 = 30 N
2-19
An extra force of 30 N beyond that required to maintain constant speed must be applied to the pedals for the bike and rider to maintain an acceleration of 0.5 m/s2. (Note that the units kg⋅m/s2 form the definition of a newton of force, so the symbol N is used.)
)
( _ms ) 2
CONCEPTS Applied Second Law Experiment Tie one end of a string to a book and the other end to a large rubber band. With your index finger curled in the loop of the rubber band, pull the book across a smooth tabletop. How much the rubber band stretches will provide a rough estimate of the force you are applying. (1) Pull the book with a constant velocity across the tabletop. Compare the force required for different constant velocities. (2) Accelerate the book at different rates. Compare the force required to maintain the different accelerations. (3) Use a different book with a greater mass and again accelerate the book at different rates. How does more mass change the results? Based on your observations, can you infer a relationship between force, acceleration, and mass?
WEIGHT AND MASS What is the meaning of weight—is it the same concept as mass? Weight is a familiar concept to most people, and in everyday language, the word is often used as having the same meaning as mass. In physics, however, there is a basic difference between weight and mass, and this difference is very important in Newton’s explanation of motion and the causes of motion. Mass is defined as the property that determines how much an object resists a change in its motion. The greater the mass, the greater the inertia, or resistance to change in motion. Consider, for example, that it is easier to push a small car into motion than to push a large truck into motion. The truck has more mass and therefore more inertia. Newton originally defined mass as the “quantity of matter” in an object, and this definition is intuitively appealing. However, Newton needed to measure inertia because of its obvious role in motion, and he redefined mass as a measure of inertia. You could use Newton’s second law to measure a mass by exerting a force on the mass and measuring the resulting acceleration. This is not very convenient, so masses are usually measured on a balance by comparing the force of gravity acting on a standard mass compared to the force of gravity acting on the unknown mass. The force of gravity acting on a mass is the weight of an object. Weight is a force and has different units (N) than mass (kg). Since weight is a measure of the force of gravity acting on CHAPTER 2 Motion
43
tiL04527_ch02_025-060.indd Page 44 7/29/09 1:03:24 PM user-s176
/Volumes/208/MH00693_R2/MH00693_R2/work%0/indd%0
an object, the force can be calculated from Newton’s second law of motion, F = ma
are proportional in a given location on the surface of Earth. Using conversion factors from inside the front cover of this book, see if you can express your weight in pounds and newtons and your mass in kg.
or downward force = (mass)(acceleration due to gravity)
What is the weight of a 60.0 kg person on the surface of Earth?
or weight = (mass) (g) or w = mg
SOLUTION equation 2.6
You learned in the section on falling objects that g is the symbol used to represent acceleration due to gravity. Near Earth’s surface, g has an approximate value of 9.8 m/s2. To understand how g is applied to an object that is not moving, consider a ball you are holding in your hand. By supporting the weight of the ball, you hold it stationary, so the upward force of your hand and the downward force of the ball (its weight) must add to a net force of zero. When you let go of the ball, the gravitational force is the only force acting on the ball. The ball’s weight is then the net force that accelerates it at g, the acceleration due to gravity. Thus, Fnet = w = ma = mg. The weight of the ball never changes in a given location, so its weight is always equal to w = mg, even if the ball is not accelerating. In the metric system, mass is measured in kilograms. The acceleration due to gravity, g, is 9.8 m/s2. According to equation 2.6, weight is mass times acceleration. A kilogram multiplied by an acceleration measured in m/s2 results in kg⋅m/s2, a unit you now recognize as a force called a newton. The unit of weight in the metric system is therefore the newton (N). In the English system, the pound is the unit of force. The acceleration due to gravity, g, is 32 ft/s2. The force unit of a pound is defined as the force required to accelerate a unit of mass called the slug. Specifically, a force of 1.0 lb will give a 1.0 slug mass an acceleration of 1.0 ft/s2. The important thing to remember is that pounds and newtons are units of force (Table 2.1). A kilogram, on the other hand, is a measure of mass. Thus, the English unit of 1.0 lb is comparable to the metric unit of 4.5 N (or 0.22 lb is equivalent to 1.0 N). Conversion tables sometimes show how to convert from pounds (a unit of weight) to kilograms (a unit of mass). This is possible because weight and mass
TABLE 2.1 Units of mass and weight in the metric and English systems of measurement Mass
×
Acceleration
=
Force
=
kg·m _
Metric system
kg
×
m _
English system
(_)
×
ft _
44
EXAMPLE 2.10
lb ft/s2
CHAPTER 2
Motion
s2
s2
=
s2 (newton) lb (pound)
A mass (m) of 60.0 kg is given, and the acceleration due to gravity (g) 9.8 m/s2 is implied. The problem asked for the weight (w). The relationship is found in equation 2.6, w = mg, which is a form of F = ma. m = 60.0 kg m g = 9.8 _ s2 w=?
w = mg m = (60.0 kg) 9.8 _ s2
(
)
m = (60.0)(9.8) (kg) _ s2 kg·m = 588 _ s2
( )
= 590 N
EXAMPLE 2.11 A 60.0 kg person weighs 100.0 N on the Moon. What is the acceleration of gravity on the Moon? (Answer: 1.67 m/s2)
NEWTON’S THIRD LAW OF MOTION Newton’s first law of motion states that an object retains its state of motion when the net force is zero. The second law states what happens when the net force is not zero, describing how an object with a known mass moves when a given force is applied. The two laws give one aspect of the concept of a force; that is, if you observe that an object starts moving, speeds up, slows down, or changes its direction of travel, you can conclude that an unbalanced force is acting on the object. Thus, any change in the state of motion of an object is evidence that an unbalanced force has been applied. Newton’s third law of motion is also concerned with forces. First, consider where a force comes from. A force is always produced by the interaction of two objects. Sometimes we do not know what is producing forces, but we do know that they always come in pairs. Anytime a force is exerted, there is always a matched and opposite force that occurs at the same time. For example, if you push on the wall, the wall pushes back with an equal and opposite force. The two forces are opposite and balanced, and you know this because F = ma and neither you nor the wall accelerated. If the acceleration is zero, then you know from F = ma that the net force is zero (zero equals zero). Note also that the two forces were between two different objects, you and the wall. Newton’s third law always describes what happens between two different objects. To simplify the many interactions that occur on Earth, consider a spacecraft in space. According to Newton’s second law (F = ma), a force must be applied to change the state of motion of the spacecraft. What is a possible source of such a force? Perhaps an 2-20
tiL04527_ch02_025-060.indd Page 45 7/18/08 7:54:07 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
Force of spacecraft on astronaut
Force of astronaut on spacecraft
F
F
FIGURE 2.22
Forces occur in matched pairs that are equal in magnitude and opposite in direction.
astronaut pushes on the spacecraft for 1 second. The spacecraft would accelerate during the application of the force, then move away from the original position at some constant velocity. The astronaut would also move away from the original position but in the opposite direction (Figure 2.22). A single force does not exist by itself. There is always a matched and opposite force that occurs at the same time. Thus, the astronaut exerted a momentary force on the spacecraft, but the spacecraft evidently exerted a momentary force back on the astronaut as well, for the astronaut moved away from the original position in the opposite direction. Newton did not have astronauts and spacecraft to think about, but this is the kind of reasoning he did when he concluded that forces always occur in matched pairs that are equal and opposite. Thus, the third law of motion is as follows: Whenever two objects interact, the force exerted on one object is equal in size and opposite in direction to the force exerted on the other object.
The third law states that forces always occur in matched pairs that act in opposite directions and on two different bodies. You could express this law with symbols as FA due to B = FB due to A equation 2.7 where the force on the astronaut, for example, would be “A due to B,” and the force on the satellite would be “B due to A.” Sometimes the third law of motion is expressed as follows: “For every action, there is an equal and opposite reaction,” but this can be misleading. Neither force is the cause of the other. The forces are at every instant the cause of each other, and they appear and disappear at the same time. If you are going to describe the force exerted on a satellite by an astronaut, then you must realize that there is a simultaneous force exerted on the astronaut by the satellite. The forces (astronaut on satellite and satellite on astronaut) are equal in magnitude but opposite in direction. Perhaps it would be more common to move a satellite with a small rocket. A satellite is maneuvered in space by firing a rocket in the direction opposite to the direction someone wants to move the satellite. Exhaust gases (or compressed gases) are 2-21
FIGURE 2.23
The football player’s foot is pushing against the ground, but it is the ground pushing against the foot that accelerates the player forward to catch a pass.
accelerated in one direction and exert an equal but opposite force on the satellite that accelerates it in the opposite direction. This is another example of the third law. Consider how the pairs of forces work on Earth’s surface. You walk by pushing your feet against the ground (Figure 2.23). Of course you could not do this if it were not for friction. You would slide as on slippery ice without friction. But since friction does exist, you exert a backward horizontal force on the ground, and, as the third law explains, the ground exerts an equal and opposite force on you. You accelerate forward from the net force as explained by the second law. If Earth had the same mass as you, however, it would accelerate backward at the same rate that you were accelerated forward. Earth is much more massive than you, however, so any acceleration of Earth is a vanishingly small amount. The overall effect is that you are accelerated forward by the force the ground exerts on you. Return now to the example of riding a bicycle that was discussed previously. What is the source of the external force that accelerates you and the bike? Pushing against the pedals is not external to you and the bike, so that force will not accelerate you and the bicycle forward. This force is transmitted through the bike mechanism to the rear tire, which pushes against the ground. It is the ground exerting an equal and opposite force against the system of you and the bike that accelerates you forward. You must consider the forces that act on the system of the bike and you CHAPTER 2 Motion
45
tiL04527_ch02_025-060.indd Page 46 7/18/08 7:54:09 AM user-s180
before you can apply F = ma. The only forces that will affect the forward motion of the bike system are the force of the ground pushing it forward and the frictional forces that oppose the forward motion. This is another example of the third law.
EXAMPLE 2.12 A 60.0 kg astronaut is freely floating in space and pushes on a freely floating 120.0 kg spacecraft with a force of 30.0 N for 1.50 s. (a) Compare the forces exerted on the astronaut and the spacecraft, and (b) compare the acceleration of the astronaut to the acceleration of the spacecraft.
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
has momentum. Both situations describe a competition where one side is moving toward victory and it is difficult to stop. It seems appropriate to borrow this term from the physical sciences because momentum is a property of movement. It takes a longer time to stop something from moving when it has a lot of momentum. The physical science concept of momentum is closely related to Newton’s laws of motion. Momentum (p) is defined as the product of the mass (m) of an object and its velocity (v), momentum = mass × velocity or p = mv
SOLUTION
equation 2.8
(a) According to Newton’s third law of motion (equation 2.7), FA due to B = FB due to A 30.0 N = 30.0 N Both feel a 30.0 N force for 1.50 s but in opposite directions. (b) Newton’s second law describes a relationship between force, mass, and acceleration, F = ma. For the astronaut: m = 60.0 kg F = 30.0 N a=?
F = ma
∴
F a=_ m
kg·m 30.0 _ s2 a =_ 60.0 kg
( )( )
30.0 kg·m _ 1 =_ _ 60.0 s2 kg
kg·m m = 0.500 _2 = 0.500 _2 kg·s s For the spacecraft: m = 120.0 kg F = 30.0 N a=?
F = ma ∴
F a=_ m
kg·m 30.0 _ s2 a =_ 120.0 kg
( )( )
1 30.0 kg·m _ =_ _ 120.0 s2 kg kg·m m = 0.250 _2 = 0.250 _2 kg·s s
EXAMPLE 2.13 After the interaction and acceleration between the astronaut and spacecraft described in example 2.12, they both move away from their original positions. What is the new speed for each? (Answer: astronaut vf = 0.750 m/s; spacecraft vf = 0.375 m/s) (Hint: vf = at + vi)
MOMENTUM Sportscasters often refer to the momentum of a team, and newscasters sometimes refer to an election where one of the candidates
46
CHAPTER 2
Motion
The astronaut in example 2.12 had a mass of 60.0 kg and a velocity of 0.750 m/s as a result of the interaction with the spacecraft. The resulting momentum was therefore (60.0 kg) (0.750 m/s), or 45.0 kg⋅m/s. As you can see, the momentum would be greater if the astronaut had acquired a greater velocity or if the astronaut had a greater mass and acquired the same velocity. Momentum involves both the inertia and the velocity of a moving object.
CONSERVATION OF MOMENTUM Notice that the momentum acquired by the spacecraft in example 2.12 is also 45.0 kg⋅m/s. The astronaut gained a certain momentum in one direction, and the spacecraft gained the very same momentum in the opposite direction. Newton originally defined the second law in terms of a rate of change of momentum being proportional to the net force acting on an object. Since the third law explains that the forces exerted on both the astronaut and the spacecraft were equal and opposite, you would expect both objects to acquire equal momentum in the opposite direction. This result is observed any time objects in a system interact and the only forces involved are those between the interacting objects (Figure 2.24). This statement leads to a particular kind of relationship called a law of conservation. In this case, the law applies to momentum and is called the law of conservation of momentum: The total momentum of a group of interacting objects remains the same in the absence of external forces.
Conservation of momentum, energy, and charge are among examples of conservation laws that apply to everyday situations. These situations always illustrate two understandings: that (1) each conservation law is an expression that describes a physical principle that can be observed and (2) each law holds regardless of the details of an interaction or how it took place. Since the conservation laws express something that always occurs, they tell us what might be expected to happen and what might be expected not to happen in a given situation. The conservation laws also allow unknown quantities to be found by analysis. The law of conservation of momentum, for example, is useful in analyzing motion in simple systems of collisions such as those of billiard balls, automobiles, or railroad cars. It is 2-22
tiL04527_ch02_025-060.indd Page 47 7/18/08 7:54:09 AM user-s180
/Volumes/209/MHDQ042/mhtiL8%0/K4-Checked_Out
F = 30.0 N t = 1.50 s
F = 30.0 N t = 1.50 s
m = 60.0 kg v = 0.750 m/s p = mv
m = 120.0 kg v = 0.375 m/s p = mv
m = (60.0 kg) (0.750 s ) = 45.0
m = (120.0 kg) (0.375 s )
kg m s •
= 45.0
kg m s •
to the law of conservation of momentum, the momentum of the bullet (mv)b must equal the momentum of the rifle –(mv)r in the opposite direction. If the bullet and rifle had the same mass, they would each move with equal velocities when the rifle was fired. The rifle is much more massive than a bullet, however, so the bullet has a much greater velocity than the rifle. The momentum of the rifle is nonetheless equal to the momentum of the bullet, and the recoil can be significant if the rifle is not held firmly against the shoulder. When held firmly against the shoulder, the rifle and the person’s body are one object. The increased mass results in a proportionally smaller recoil velocity.
EXAMPLE 2.14 A 20,000 kg railroad car is coasting at 3 m/s when it collides and couples with a second, identical car at rest. What is the resulting speed of the combined cars?
FIGURE 2.24
Both the astronaut and the spacecraft received a force of 30.0 N for 1.50 s when they pushed on each other. Both then have a momentum of 45.0 kg·m/s in the opposite direction. This is an example of the law of conservation of momentum.
also useful in measuring action and reaction interactions, as in rocket propulsion, where the backward momentum of the exhaust gases equals the momentum given to the rocket in the opposite direction. When this is done, momentum is always found to be conserved. The firing of a bullet from a rifle and the concurrent “kick” or recoil of the rifle is often used as an example of conservation of momentum where the interaction between objects results in momentum in opposite directions (Figure 2.25). When the rifle is fired, the exploding gunpowder propels the bullet with forward momentum. At the same time