Flexible Multibody Dynamics
SOLID MECHANICS AND ITS APPLICATIONS Volume 176
Series Editor:
G.M.L. GLADWELL Department of Civil Engineering University of Waterloo Waterloo, Ontario, Canada N2L 3GI
Aims and Scope of the Series The fundamental questions arising in mechanics are: Why?, How?, and How much? The aim of this series is to provide lucid accounts written by authoritative researchers giving vision and insight in answering these questions on the subject of mechanics as it relates to solids. The scope of the series covers the entire spectrum of solid mechanics. Thus it includes the foundation of mechanics; variational formulations; computational mechanics; statics, kinematics and dynamics of rigid and elastic bodies: vibrations of solids and structures; dynamical systems and chaos; the theories of elasticity, plasticity and viscoelasticity; composite materials; rods, beams, shells and membranes; structural control and stability; soils, rocks and geomechanics; fracture; tribology; experimental mechanics; biomechanics and machine design. The median level of presentation is the first year graduate student. Some texts are monographs defining the current state of the field; others are accessible to final year undergraduates; but essentially the emphasis is on readability and clarity.
For other titles published in this series, go to www.springer.com/series/6557
O. A. Bauchau
Flexible Multibody Dynamics
1C
O. A. Bauchau Georgia Institute of Technology School of Aerospace Engineering Ferst Dr. 270 30332-0150 Atlanta Georgia USA
[email protected]
ISSN 0925-0042 ISBN 978-94-007-0334-6 e-ISBN 978-94-007-0335-3 DOI 10.1007/978-94-007-0335-3 Springer Dordrecht Heidelberg London New York Library of Congress Control Number: 2010938509 © Springer Science+Business Media B.V. 2011 No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording or otherwise, without written permission from the Publisher, with the exception of any material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Cover Design: CREST Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
To my wife, Yi-Ling, and my family
Preface
Multibody dynamics analysis was originally developed as a tool for modeling rigid multibody systems with simple tree-like topologies, but has considerably evolved to the point where it can handle linearly and nonlinearly elastic multibody systems with arbitrary topologies. It is now used widely as a fundamental design tool in many areas of engineering. This textbook has emerged over the past two decades from efforts to teach graduate courses in advanced dynamics and ƀexible multibody dynamics to engineering students. Although this book reviews the basic principles of dynamics, it is assumed that students enrolling in these graduate courses have completed a comprehensive set of undergraduate courses in statics, dynamics, deformable bodies, energy methods, and numerical analysis. The advanced dynamics course is, of course, a prerequisite for the ƀexible multibody dynamics course. The book is divided into six parts. The ſrst part presents the basic tools and concepts that form the foundation for the other parts. It begins with a review of basic operations on vectors and tensors. The second chapter deals with coordinate systems. The differential geometry of both curves and surfaces is presented and leads to path and surface coordinates. Chapter 3 reviews the basic principles of dynamics, starting with Newton’s laws. The important concept of conservative forces is discussed. Systems of particles are then treated, leading to Euler’s ſrst and second laws. Chapter 4 concludes the ſrst part of the book with a detailed description of threedimensional rotation. For most graduate students, this chapter is not really a review. Indeed, many undergraduate dynamics courses focus primarily on two-dimensional systems. Problems involving three-dimensional rotation, if treated at all, are often rushed in the last few weeks of the semester, leaving most students with insufſcient time to absorb this difſcult material. Part 2 develops rigid body dynamics, the foundation of multibody dynamics. The analysis of the kinematics of rigid bodies is the focus of chapter 5. It starts with the analysis of the general displacement and velocity ſelds of a rigid body. The classical topics of relative velocities and accelerations are also addressed. The motion tensor and its properties are given an in-depth treatment.
VIII
Preface
Kinetics of rigid bodies is the focus of chapter 6. The various forms of Euler’s law governing the rotational motion of rigid bodies are presented. While the emphasis of the chapter is on three-dimensional problems, planar motion is also treated in details. Part 3 presents the fundamental concepts of analytical dynamics. Chapter 7 introduces the concepts of virtual displacement, virtual rotation, and virtual work. The principle of virtual work for static problems is given extensive coverage as this is an indispensable topic for the study of the variational and energy principles of dynamics presented in chapter 8. D’Alembert’s principle, Hamilton’s principle, and Lagrange’s formulation are derived and their use illustrated with numerous examples. Multibody systems are characterized by two distinguishing features: system components undergo ſnite relative rotations and these components are connected by mechanical joints that impose restrictions on their relative motion. The ſrst distinguishing feature is of a purely kinematic nature: in multibody systems, overall and relative motions are ſnite, leading to inherently nonlinear problems. The second distinguishing feature is the main culprit for the complexity of many multibody formulations. Each component of a ƀexible multibody system is a constrained dynamical system because of the restrictions imposed on it by the mechanical joints connecting it to others. The ſrst three parts of the book present background material on unconstrained dynamical systems, i.e., systems for which the number of generalized coordinated used to describe the system equals the number of degrees of freedom. In contrast, part 4 focuses on constrained dynamical systems. Chapter 9 presents Lagrange’s multiplier technique and the distinction between holonomic and nonholonomic constraints. The combination of the principle of virtual work with Lagrange’s multiplier technique is shown to provide a powerful tool for the analysis of constrained static problems. Chapter 10 reviews the classical formulations for constrained dynamical systems. D’Alembert’s principle, Hamilton’s principle, and Lagrange’s formulation are updated to accommodate the presence of both holonomic and nonholonomic constraints. The kinematic constraints associated with the lower pair joints are described in details. The advanced formulations presented in chapter 11 form the theoretical basis for the practical approaches to numerical solutions of multibody systems. Maggi’s, the index-1, the null space, and Udwadia and Kalaba’s formulations are presented and the chapter concludes with the geometric interpretation of constraints and Gauss’ principle. Finally, chapter 12 describes in a cursory manner the many numerical approaches used to treat constrained dynamical systems, most of which are rooted in the formulations presented in chapter 11. Chapter 12 is in fact a comprehensive review of the literature on methods of constrained dynamics applied to the solution of multibody systems. It is clearly impossible to treat each approach in detail. Rather, the salient features of each approach are given, and the relationships between them are underlined. The chapter concludes with a detailed description of scaling methods for Lagrange’s equations of the ſrst kind.
Preface
IX
Part 5 presents a comprehensive overview of the many approaches used to parameterize rotation and motion. The vectorial parameterizations of rotation and motion are given special emphasis as they provide a uniſed approach to this complex topic. Speciſc parameterizations widely used in multibody formulations are reviewed in details, whereas other are presented in a more cursory manner. The last part of the book focuses on ƀexible multibody dynamics problems, which are categorized into three groups: rigid multibody systems, linearly elastic multibody systems, and nonlinearly elastic multibody systems. The last three chapters of the book focus on the latter category, nonlinearly elastic multibody systems. Chapter 15 presents background material. The basic equations of linear elastodynamics are presented ſrst. Next, ſnite displacement kinematics are studied, with special emphasis on small strain problems. Chapter 16 develops the governing equations of ƀexible joints, cables, beams, and plates and shells. All formulations are geometrically exact, i.e., all structural components are allowed to undergo arbitrarily large displacements and rotations, although strains are assumed to remain small. Finally, chapter 17 presents details of the implementation of these elements within the framework of ſnite element formulations. For instance, interpolation of the rotation ſelds is an issue that requires special attention. The topics covered in the ſrst three parts of the book form the basis for a threecredit hour, graduate level course in advanced dynamics, typically taken by ſrst year graduate students. Topics selected from the last three parts provide an ample material for a follow-on, three-credit hour, graduate level course in ƀexible multibody dynamics. The advanced dynamics course is, of course, a prerequisite for the ƀexible multibody dynamics course. Typically, engineering students generally grasp concepts more quickly when presented ſrst with practical examples, which then lead to broader generalizations. Consequently, most concepts are ſrst introduced by means of simple examples; more formal and abstract statements are presented later, when the student has a better grasp of the signiſcance of the concepts. Numerous homework problems are included throughout the book. Some are straightforward applications of basic concepts, others are small projects that require the use of computers and mathematical software, and others involve conceptual questions that are more appropriate for quizzes and exams. The text also provides many examples that treat practical problems in great details. Some of the examples are re-examined in successive chapters to illustrate alternative or more versatile solution methods. Notation is a challenging issue in dynamics. Given the limitations of the Latin and Greek alphabets, the same symbol is sometimes used to indicate different quantities, but mostly in different contexts. Consequently, no attempt has been made to provide a comprehensive nomenclature, which would lead to even more confusion. It is traditional to use a bold typeface to represent vectors and tensors, but this is very difſcult to reproduce in handwriting, whether on a board or in personal notes. A notation that is more suitable for hand-written notes has been adopted here. Vectors and arrays are denoted using an underline, such as u or F . Unit vectors are used
X
Preface
frequently and are assigned a special notation using a single overbar, such as ¯ı1 , which denotes the ſrst Cartesian coordinate axis. The overbar notation also indicates non-dimensional scalar quantities, i.e., k¯ is a non-dimensional stiffness coefſcient. This is inconsistent, but the two uses are in such different contexts that it should not lead to confusion. Second-order tensors and matrices are indicated using a doubleunderline, i.e., R indicates a 3×3 rotation tensor or M a n × n mass matrix. Notations aT b, ab, and a bT indicate the scalar, vector, and tensor products, respectively, of two vectors, a and b. While many students voice their displeasure with this mnemonic convention that departs from the classical “dot” and “cross product” notations, they very rapidly recognize and appreciate its power and conciseness. Finally, I am indebted to the many students at Georgia Tech who have given me helpful and constructive feedback over the past decade as I developed the course notes that are the precursors of this book. The constructive use of their many questions and confusion has helped shape this book, and the treatment of many topics was modiſed numerous times before ſnding their ſnal form.
Atlanta, Georgia, July 2010
Olivier Bauchau
Contents
Part I Basic tools and concepts 1
Vectors and tensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Free vectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.1 Vector sum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.2 Scalar multiplication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.3 Norm of a free vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.4 Angle between two vectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.5 The scalar product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.6 Orthonormal bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.7 The vector product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.8 The tensor product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.9 The mixed product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.10 Tensor identities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.11 Solution of the vector product equation . . . . . . . . . . . . . . . . . . 1.1.12 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Bound vectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.1 The position vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.2 Reference frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Geometric entities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.1 Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.2 Planes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.3 Circles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.4 Spheres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Second-order tensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4.1 Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4.2 Eigenvalue analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Tensor calculus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 3 4 4 4 5 5 6 7 9 10 10 11 12 13 14 14 15 15 16 16 16 20 22 22 23 27 27
XII
Contents
1.6 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
2
Coordinate systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Cartesian coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Differential geometry of a curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2.1 Intrinsic parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2.2 Arbitrary parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Path coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 Differential geometry of a surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.1 The ſrst metric tensor of a surface . . . . . . . . . . . . . . . . . . . . . . 2.4.2 Curve on a surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.3 The second metric tensor of a surface . . . . . . . . . . . . . . . . . . . 2.4.4 Analysis of curvatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.5 Lines of curvature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.6 Derivatives of the base vectors . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.7 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 Surface coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6 Differential geometry of a three-dimensional mapping . . . . . . . . . . . . 2.6.1 Arbitrary parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6.2 Orthogonal parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6.3 Derivatives of the base vectors . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 Orthogonal curvilinear coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7.1 Cylindrical coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7.2 Spherical coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31 31 32 32 34 39 39 40 40 41 42 43 44 44 48 49 49 50 51 52 53 54 55
3
Basic principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Newtonian mechanics for a particle . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.1 Kinematics of a particle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2 Newton’s laws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.3 Systems of units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.4 The principle of work and energy . . . . . . . . . . . . . . . . . . . . . . . 3.2 Conservative forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1 Principle of conservation of energy . . . . . . . . . . . . . . . . . . . . . 3.2.2 Potential of common conservative forces . . . . . . . . . . . . . . . . 3.2.3 Non-conservative forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.4 The principle of impulse and momentum . . . . . . . . . . . . . . . . 3.2.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Contact forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.1 Kinematics of particles in contact with a surface . . . . . . . . . . 3.3.2 Kinematics of particles in contact with a curve . . . . . . . . . . . . 3.3.3 Constitutive laws for tangential contact forces . . . . . . . . . . . . 3.3.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Newtonian mechanics for a system of particles . . . . . . . . . . . . . . . . . . 3.4.1 The center of mass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
57 57 57 58 60 61 62 65 66 70 74 79 85 86 87 88 92 94 95
Contents
3.4.2 3.4.3 3.4.4 3.4.5 3.4.6 3.4.7 4
XIII
The forces and moments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Linear and angular momenta . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Euler’s laws for a system of particles . . . . . . . . . . . . . . . . . . . . 98 The principle of work and energy . . . . . . . . . . . . . . . . . . . . . . . 100 The principle of impulse and momentum . . . . . . . . . . . . . . . . 100 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
The geometric description of rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 The direction cosine matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Planar rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Non-commutativity of rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 Euler angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 Euler’s theorem on rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 The rotation tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 Properties of the rotation tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 Change of basis operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8.1 Vector components in various orthonormal bases . . . . . . . . . . 4.8.2 Second-order tensor components in various orthonormal bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8.3 Tensor operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8.4 The concept of tensor analysis . . . . . . . . . . . . . . . . . . . . . . . . . 4.8.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 Composition of rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10 Time derivatives of rotation operations . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.1 The angular velocity vector: an intuitive approach . . . . . . . . . 4.10.2 The angular velocity vector: a rigorous approach . . . . . . . . . . 4.10.3 The addition theorem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.4 Angular acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11 Euler angle formulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11.1 Euler angles: sequence 3-1-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11.2 Euler angles: sequence 3-2-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11.3 Euler angles: sequence 3-2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11.4 Euler angles: sequence 3-1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12 Spatial derivatives of rotation operations . . . . . . . . . . . . . . . . . . . . . . . 4.12.1 Path coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12.2 Surface coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12.3 Orthogonal curvilinear coordinates . . . . . . . . . . . . . . . . . . . . . 4.12.4 The differential rotation vector . . . . . . . . . . . . . . . . . . . . . . . . . 4.13 Applications to particle dynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.13.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14 Change of reference frame operations . . . . . . . . . . . . . . . . . . . . . . . . . . 4.15 Orientation of a unit vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
107 107 108 109 109 111 112 113 115 116 116 117 119 121 122 124 127 129 129 131 135 137 137 138 139 139 140 141 143 143 144 145 148 149 152 155 157
XIV
Contents
Part II Rigid body dynamics 5
Kinematics of rigid bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 General motion of a rigid body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 Velocity ſeld of a rigid body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Relative velocity and acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1 Point P is in motion with respect to the rigid body . . . . . . . . . 5.3.2 Point P is a material point of the rigid body . . . . . . . . . . . . . . 5.3.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Contact between rigid bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 The motion tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.1 Transformation of a line of a rigid body . . . . . . . . . . . . . . . . . 5.5.2 Properties of the motion tensor . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.3 Mozzi-Chasles’ axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.4 Intrinsic expression of the motion tensor . . . . . . . . . . . . . . . . . 5.5.5 Properties of the generalized vector product tensor . . . . . . . . 5.5.6 Change of frame operation for linear and angular velocities . 5.5.7 Change of frame operation for forces and moments . . . . . . . . 5.6 Derivatives of ſnite motion operations . . . . . . . . . . . . . . . . . . . . . . . . . 5.6.1 The velocity vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6.2 The differential motion vector . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6.3 Change of frame operations . . . . . . . . . . . . . . . . . . . . . . . . . . .
161 161 163 165 166 167 168 174 179 183 187 187 188 189 190 191 192 193 194 194 196 197
6
Kinetics of rigid bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 The angular momentum vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 The kinetic energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Properties of the mass moment of inertia tensor . . . . . . . . . . . . . . . . . 6.3.1 The parallel axis theorem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3.2 Change of basis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3.3 Principal axes of inertia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4 Derivatives of the angular momentum vector . . . . . . . . . . . . . . . . . . . . 6.5 Equations of motion for a rigid body . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.1 Euler’s equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.2 The pivot equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.3 Equations of motion with respect to a material point of the rigid body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.4 Equations of motion with respect to an arbitrary point . . . . . . 6.6 The principle of work and energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.7 Planar motion of rigid bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.7.1 Euler’s equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
201 202 204 205 205 206 207 208 210 211 212 213 213 214 214 222 227 227
Contents
6.7.2 6.7.3
The pivot equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Equations of motion with respect to a material point of the body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.7.4 Equations of motion with respect to an arbitrary point . . . . . . 6.7.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.8 Inertial characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XV
228 228 229 237 248
Part III Concepts of analytical dynamics 7
Basic concepts of analytical dynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1 Mathematical preliminaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1.1 Stationary point of a function . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1.2 Stationary point of a deſnite integral . . . . . . . . . . . . . . . . . . . . 7.2 Generalized coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.3 The virtual displacement and rotation vectors . . . . . . . . . . . . . . . . . . . 7.3.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4 Virtual work and generalized forces . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4.1 Virtual work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4.2 Generalized forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4.3 Virtual work done by internal forces . . . . . . . . . . . . . . . . . . . . 7.4.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5 The principle of virtual work for statics . . . . . . . . . . . . . . . . . . . . . . . . 7.5.1 Principle of virtual work for a single particle . . . . . . . . . . . . . 7.5.2 Kinematically admissible virtual displacements . . . . . . . . . . . 7.5.3 Use of inſnitesimal displacements as virtual displacements . 7.5.4 Principle of virtual work for a system of particles . . . . . . . . . 7.5.5 The use of generalized coordinates . . . . . . . . . . . . . . . . . . . . . . 7.5.6 The principle of virtual work and conservative forces . . . . . . 7.5.7 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
253 253 254 255 257 263 268 268 268 268 269 271 271 272 277 282 284 287 289 292
8
Variational and energy principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1 D’Alembert’s principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.1 Equations of motion for a rigid body . . . . . . . . . . . . . . . . . . . . 8.1.2 Equations of motion for the planar motion of a rigid body . . 8.1.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2 Hamilton’s principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2.1 Use of physical coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2.2 Use of generalized coordinates . . . . . . . . . . . . . . . . . . . . . . . . . 8.2.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3 Lagrange’s formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.4 Analysis of the motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.4.1 General procedure for the analysis of motion . . . . . . . . . . . . . 8.4.2 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
295 295 297 299 304 305 306 308 320 322 335 336 337 345
XVI
Contents
Part IV Constrained dynamical systems 9
Constrained systems: preliminaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1 Lagrange’s multiplier method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2 Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2.1 Holonomic constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2.2 Nonholonomic constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3 The principle of virtual work for constrained static problems . . . . . . 9.3.1 The principle of virtual work for a constrained particle . . . . . 9.3.2 The principle of virtual work and Lagrange multipliers . . . . . 9.3.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
351 358 362 362 362 364 370 371 372 378 382
10 Constrained systems: classical formulations . . . . . . . . . . . . . . . . . . . . . . . 10.1 D’Alembert’s principle for constrained systems . . . . . . . . . . . . . . . . . 10.1.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2 Hamilton’s principle and Lagrange’s formulation with holonomic constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2.1 Hamilton’s principle with holonomic constraints . . . . . . . . . . 10.2.2 Lagrange’s formulation with holonomic constraints . . . . . . . . 10.2.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3 Hamilton’s principle and Lagrange’s formulation with nonholonomic constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3.1 Hamilton’s principle with nonholonomic constraints . . . . . . . 10.3.2 Lagrange’s formulation with nonholonomic constraints . . . . 10.3.3 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4 The lower pair joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4.1 Kinematics of a typical lower pair joint . . . . . . . . . . . . . . . . . . 10.4.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4.3 Relative motions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.5 Generic constraints for lower pair joints . . . . . . . . . . . . . . . . . . . . . . . . 10.5.1 First constraint: vanishing relative rotation . . . . . . . . . . . . . . . 10.5.2 Second constraint: vanishing relative displacement . . . . . . . . 10.5.3 Third constraint: deſnition of relative rotation . . . . . . . . . . . . 10.5.4 Fourth constraint: deſnition of relative displacement . . . . . . . 10.6 Constraints for the lower pair joints . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.1 Revolute joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.2 Prismatic joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.3 Cylindrical joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.4 Screw joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.5 Planar joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.6 Spherical joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.7 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
385 385 390 392 393 394 398 402 403 403 405 405 406 406 407 408 409 410 411 411 412 412 414 415 416 416 417 418
Contents
XVII
10.7 Other joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7.1 Universal joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7.2 Curve sliding joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7.3 Sliding joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
418 418 419 421 422
11 Constrained systems: advanced formulations . . . . . . . . . . . . . . . . . . . . . . 11.1 Lagrange’s equations of the ſrst kind . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2 Algebraic elimination of Lagrange’s multipliers . . . . . . . . . . . . . . . . . 11.2.1 Maggi’s formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.2 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.3 Index-1 formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.5 The null space formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.6 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.7 Udwadia and Kalaba’s formulation . . . . . . . . . . . . . . . . . . . . . 11.2.8 Comparison of the ODE formulations . . . . . . . . . . . . . . . . . . . 11.2.9 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.3 The geometric interpretation of constraints . . . . . . . . . . . . . . . . . . . . . 11.3.1 The orthogonal projection operator . . . . . . . . . . . . . . . . . . . . . 11.3.2 The projection operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.3.3 Projection of the equations of motion . . . . . . . . . . . . . . . . . . . 11.3.4 Elimination of Lagrange’s multipliers . . . . . . . . . . . . . . . . . . . 11.4 Gauss’ principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.5 Additional formulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
425 426 427 428 435 438 441 442 444 444 445 447 447 448 450 453 455 457 461
12 Constrained systems: numerical methods . . . . . . . . . . . . . . . . . . . . . . . . . 12.1 Ordinary differential equation techniques . . . . . . . . . . . . . . . . . . . . . . . 12.1.1 “Maggi-like” formulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1.2 Maggi’s formulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1.3 Discussion of the methods based on Maggi’s formulation . . . 12.1.4 Null space formulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1.5 Udwadia and Kalaba’s formulations . . . . . . . . . . . . . . . . . . . . . 12.1.6 The projective formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1.7 Modiſed phase space formulation . . . . . . . . . . . . . . . . . . . . . . 12.2 Index reduction techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 Constraint violation stabilization techniques . . . . . . . . . . . . . . . . . . . . 12.3.1 Control theory based stabilization techniques . . . . . . . . . . . . . 12.3.2 Penalty based stabilization techniques . . . . . . . . . . . . . . . . . . . 12.4 Constraint violation elimination techniques . . . . . . . . . . . . . . . . . . . . . 12.4.1 Geometric projection approach to stabilization . . . . . . . . . . . . 12.4.2 The mass-orthogonal projection formulation . . . . . . . . . . . . . 12.5 Finite element based techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.5.1 Floating frame of reference approach . . . . . . . . . . . . . . . . . . . . 12.5.2 Component mode synthesis methods . . . . . . . . . . . . . . . . . . . .
463 464 464 466 467 468 469 469 470 470 473 473 475 478 478 480 481 482 484
XVIII
Contents
12.5.3 Basic solution techniques for ſnite element models . . . . . . . . 12.5.4 Numerically dissipative schemes . . . . . . . . . . . . . . . . . . . . . . . 12.5.5 Nonlinear unconditionally stable schemes . . . . . . . . . . . . . . . . 12.5.6 Enforcement of the constraints . . . . . . . . . . . . . . . . . . . . . . . . . 12.5.7 The discrete null space approach . . . . . . . . . . . . . . . . . . . . . . . 12.6 Scaling of Lagrange’s equation of the ſrst kind . . . . . . . . . . . . . . . . . . 12.6.1 Scaling of the equations of motion . . . . . . . . . . . . . . . . . . . . . . 12.6.2 The augmented Lagrangian term . . . . . . . . . . . . . . . . . . . . . . . 12.6.3 Time discretization of the equations . . . . . . . . . . . . . . . . . . . . . 12.6.4 Relationship to the preconditioning approach . . . . . . . . . . . . . 12.6.5 Beneſts of the augmented Lagrangian formulation . . . . . . . . 12.6.6 Using other time integration schemes . . . . . . . . . . . . . . . . . . . 12.7 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
485 487 487 488 489 490 492 493 494 498 499 501 504
Part V Parameterization of rotation and motion 13 Parameterization of rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.1 Cayley’s rotation parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.2 Quaternion algebra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.3 Euler parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.3.1 The rotation tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.3.2 The angular velocity vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.3.3 Composition of rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.3.4 Determination of Euler parameters . . . . . . . . . . . . . . . . . . . . . . 13.3.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4 The vectorial parameterization of rotation . . . . . . . . . . . . . . . . . . . . . . 13.4.1 Fundamental properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4.2 The rotation tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4.3 The angular velocity vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4.4 Determination of the rotation parameter vector . . . . . . . . . . . 13.4.5 Composition of rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4.6 Linearization of the tangent tensor . . . . . . . . . . . . . . . . . . . . . . 13.4.7 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5 Speciſc choices of generating function . . . . . . . . . . . . . . . . . . . . . . . . 13.6 The extended vectorial parameterization . . . . . . . . . . . . . . . . . . . . . . . 13.6.1 Singularities of the vectorial parameterization . . . . . . . . . . . . 13.6.2 The rescaling operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.7 Speciſc parameterizations of rotation . . . . . . . . . . . . . . . . . . . . . . . . . . 13.7.1 The Cartesian rotation vector . . . . . . . . . . . . . . . . . . . . . . . . . . 13.7.2 The Euler-Rodrigues parameters . . . . . . . . . . . . . . . . . . . . . . . 13.7.3 The Cayley-Gibbs-Rodrigues parameters . . . . . . . . . . . . . . . . 13.7.4 The Wiener-Milenkovi´c parameters . . . . . . . . . . . . . . . . . . . . . 13.7.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
511 513 514 516 517 517 518 518 523 524 524 526 527 529 530 530 530 531 533 533 534 537 537 538 538 539 541
Contents
14 Parameterization of motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1 Cayley’s motion parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.2 Bi-quaternion algebra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.3 Euler motion parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.3.1 The motion tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.3.2 The velocity vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.3.3 Composition of ſnite motions . . . . . . . . . . . . . . . . . . . . . . . . . . 14.3.4 Determination of Euler motion parameters . . . . . . . . . . . . . . . 14.3.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4 The vectorial parameterization of motion . . . . . . . . . . . . . . . . . . . . . . . 14.4.1 Fundamental properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4.2 The motion parameter vector . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4.3 The generalized vector product tensor . . . . . . . . . . . . . . . . . . . 14.4.4 The motion tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4.5 The velocity vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4.6 Determination of the motion parameter vector . . . . . . . . . . . . 14.4.7 Composition of ſnite motions . . . . . . . . . . . . . . . . . . . . . . . . . . 14.5 Speciſc parameterizations of motion . . . . . . . . . . . . . . . . . . . . . . . . . . 14.5.1 Alternative choices of the motion parameter vector . . . . . . . . 14.5.2 The exponential map of motion . . . . . . . . . . . . . . . . . . . . . . . . 14.5.3 The Euler-Rodrigues motion parameters . . . . . . . . . . . . . . . . . 14.5.4 The Cayley-Gibbs-Rodrigues motion parameters . . . . . . . . . . 14.5.5 The Wiener-Milenkovi´c motion parameters . . . . . . . . . . . . . . 14.5.6 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XIX
543 544 546 547 548 549 550 550 553 554 554 556 558 558 559 561 561 561 562 563 563 563 564 564
Part VI Flexible multibody dynamics 15 Flexible multibody systems: preliminaries . . . . . . . . . . . . . . . . . . . . . . . . 569 15.1 Classiſcation of multibody systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 569 15.1.1 Linearly and nonlinearly elastic multibody systems . . . . . . . . 570 15.1.2 Shortcomings of modal analysis applied to nonlinear systems 571 15.1.3 Finite element based modeling of ƀexible multibody systems 575 15.2 The elastodynamics problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579 15.2.1 Review of the equations of linear elastodynamics . . . . . . . . . 580 15.2.2 The principle of virtual work . . . . . . . . . . . . . . . . . . . . . . . . . . 583 15.2.3 Hamilton’s principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 586 15.3 Finite displacements kinematics for ƀexible bodies . . . . . . . . . . . . . . 588 15.3.1 The engineering strain components . . . . . . . . . . . . . . . . . . . . . 592 15.3.2 The deformation gradient tensor . . . . . . . . . . . . . . . . . . . . . . . . 592 15.3.3 The metric tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 593 15.3.4 The Green-Lagrange strain tensor . . . . . . . . . . . . . . . . . . . . . . 593 15.4 Strain measures for various differential elements . . . . . . . . . . . . . . . . 594 15.4.1 Stretch of a material line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 594 15.4.2 Angle between two material lines . . . . . . . . . . . . . . . . . . . . . . . 595
XX
Contents
15.4.3 Surface dilatation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.4.4 Volume dilatation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.4.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.5 The formulation of small strain problems . . . . . . . . . . . . . . . . . . . . . . . 15.5.1 Decomposition of the deformation gradient tensor . . . . . . . . . 15.5.2 The small strain assumption . . . . . . . . . . . . . . . . . . . . . . . . . . .
595 596 596 597 597 598
16 Formulation of ƀexible elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.1 Formulation of ƀexible joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.1.1 Flexible joint conſguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.1.2 Flexible joint differential work . . . . . . . . . . . . . . . . . . . . . . . . . 16.1.3 The deformation measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.1.4 Change of reference frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.1.5 Deformation measure invariance . . . . . . . . . . . . . . . . . . . . . . . 16.1.6 Flexible joint constitutive laws . . . . . . . . . . . . . . . . . . . . . . . . . 16.2 Formulation of cable equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.2.1 The kinematics of the problem . . . . . . . . . . . . . . . . . . . . . . . . . 16.2.2 The small strain assumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.2.3 Governing equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.2.4 Extension to dynamic problems . . . . . . . . . . . . . . . . . . . . . . . . 16.2.5 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.3 Formulation of beam equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.3.1 Kinematics of the problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.3.2 Governing equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.3.3 Extension to dynamic problems . . . . . . . . . . . . . . . . . . . . . . . . 16.3.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.4 Formulation of plate and shell equations . . . . . . . . . . . . . . . . . . . . . . . 16.4.1 Kinematics of the shell problem . . . . . . . . . . . . . . . . . . . . . . . . 16.4.2 Governing equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.4.3 Extension to dynamic problems . . . . . . . . . . . . . . . . . . . . . . . . 16.4.4 Mixed interpolation of tensorial components . . . . . . . . . . . . .
601 601 603 604 605 606 607 608 613 613 614 615 616 616 617 618 620 622 628 628 629 631 633 634
17 Finite element tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 639 17.1 Interpolation of displacement ſelds . . . . . . . . . . . . . . . . . . . . . . . . . . . 639 17.2 Interpolation of rotation ſelds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 644 17.2.1 Finite element discretization . . . . . . . . . . . . . . . . . . . . . . . . . . . 646 17.2.2 Total versus incremental unknowns . . . . . . . . . . . . . . . . . . . . . 650 17.2.3 Interpolation of incremental rotations . . . . . . . . . . . . . . . . . . . 651 17.3 Governing equations and linearization process . . . . . . . . . . . . . . . . . . 657 17.3.1 Statics problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657 17.3.2 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 659 17.3.3 Linear structural dynamics problems . . . . . . . . . . . . . . . . . . . . 660 17.3.4 Nonlinear structural dynamics problems . . . . . . . . . . . . . . . . . 661 17.3.5 Multibody dynamics problems with holonomic constraints . 662 17.3.6 Multibody dynamics problems with nonholonomic constraints663
Contents
XXI
17.4 The generalized-α time integration scheme . . . . . . . . . . . . . . . . . . . . . 664 17.4.1 Linear structural dynamics problems . . . . . . . . . . . . . . . . . . . . 665 17.4.2 Nonlinear structural dynamics problems . . . . . . . . . . . . . . . . . 667 17.4.3 Multibody dynamics problems with holonomic constraints . 669 17.4.4 Multibody dynamics problems with nonholonomic constraints669 17.5 Energy preserving and decaying schemes . . . . . . . . . . . . . . . . . . . . . . 670 17.5.1 The symmetric hyperbolic form . . . . . . . . . . . . . . . . . . . . . . . . 672 17.5.2 Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 677 17.5.3 Practical time integration schemes . . . . . . . . . . . . . . . . . . . . . . 677 17.5.4 Enforcement of the constraints . . . . . . . . . . . . . . . . . . . . . . . . . 682 17.6 Implementation of cable elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 685 17.6.1 Inertial forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 686 17.6.2 Elastic forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 686 17.6.3 Dissipative forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 687 17.6.4 Gravity forces for cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 687 17.6.5 Finite element formulation of cables . . . . . . . . . . . . . . . . . . . . 688 17.7 Finite element implementation of beam elements . . . . . . . . . . . . . . . . 689 17.7.1 Inertial forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 689 17.7.2 Elastic forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 691 17.7.3 Dissipative forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 693 17.7.4 Gravity forces for beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 695 17.7.5 Finite element formulation of beams . . . . . . . . . . . . . . . . . . . . 695 18 Mathematical tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1 The singular value decomposition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2 The Moore-Penrose generalized inverse . . . . . . . . . . . . . . . . . . . . . . . . 18.2.1 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3 Gauss-Legendre quadrature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
697 697 698 699 699
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721
Part I
Basic tools and concepts
1 Vectors and tensors
Vectors and tensors are basic tools for the formulation of kinematics and dynamics problems. This chapter introduces notations and the fundamental operations on vectors and tensors that will be used throughout this book.
1.1 Free vectors Consider two points, denoted A and B, in three-dimensional space, as shown in ſg. 1.1. The line that connects point A to point B is called an oriented line segment, and denoted AB. In the following, the word “segment” will often be used to indicate an oriented line segment. Next, consider two points, A and B , such that ABB A forms a parallelogram. Segments AB and A B are then of identical length and are parallel to each other. Similarly, if two other points, A and B , are such that ABB A also forms a parallelogram, segments AB and A B are then of identical length and parallel to each other. Segments AB, A B , and A B are said to be equivalent. The ensemble of all equivalent segments deſne the free vector a: a given oriented line segment deſnes a free vector. B¢
B
a
a
a
b
b
c
A¢
C
B¢¢ a
A
A
a
B
A¢¢ Fig. 1.1. A free vector.
Fig. 1.2. Sum of two vectors c = a + b.
O. A. Bauchau, Flexible Multibody Dynamics, DOI 10.1007/978-94-007-0335-3_1 © Springer Science+Business Media B.V. 2011
4
1 Vectors and tensors
1.1.1 Vector sum The addition of two free vectors, a and b, is described in ſg. 1.2. Let segments AB and BC deſne vectors a and b, respectively, and point B is both the end of segment AB and the origin of segment BC. The vector sum of free vectors, a and b, is then free vector c deſned by all segments equivalent to AC. As ſg. 1.2 indicates, the vector sum is commutative, i.e., c = a + b = b + a.
(1.1)
1.1.2 Scalar multiplication
l
B a
A b = aa
B¢
l’ = al a>0
b = aa B¢¢
A¢¢
Figure 1.3 shows segment AB that deſnes vector a; the length of vector a is deſned as the distance, , between points A and B. The multiplication of a free vector, a, by a scalar, α, is depicted in ſg. 1.3 and is denoted as b = αa. (1.2)
l’ = |a| l a<0
If α is positive, vector b is deſned by segment A B parallel to AB, oriented in Fig. 1.3. Multiplying a vector by a scalar: the same direction, and of length = α. If α is negative, vector b is deſned by segb = αa. ment A B parallel to AB, oriented in the opposite direction, and of length = |α|. A¢
1.1.3 Norm of a free vector Segment AB shown in ſg. 1.3 deſnes a free vector, a. The norm of free vector, a, is deſned as the length, , of any segment deſning it. Notation a is used to express the norm of a vector, a = a = . (1.3) A null vector is a vector of vanishing length, i.e., a = 0 implies a = a = = 0. From these deſnitions, it follows that αa = |α| a,
(1.4)
and the triangular inequality implies a + b ≤ a + b.
(1.5)
¯ A unit A unit vector is a vector of unit norm and is indicated by an overbar, (·). vector can be constructed from any vector, a, by dividing it by its norm, a ¯= By construction, ¯ a = 1.
a . a
(1.6)
1.1 Free vectors
5
1.1.4 Angle between two vectors Figure 1.4 deſnes the angle, Φ, between two free vectors, a and b. Let segments AB and AC deſne the free vectors a and b, respectively. Angle Φ is that between segments AB and AC when these two segments share a common point A. The angle between two free vectors is denoted as (1.7)
Φ = (a, b).
Note that (a, b) = (b, a) = Φ. The angle between two vectors is such that 0 ≤ Φ ≤ π, i.e., sin Φ ≥ 0. c C b
b F
A
b+c a
B ||b||cos(a,b)
a
||c||cos(a,c)
||b + c||cos(a,b + c) Fig. 1.4. Angle between two vectors.
Fig. 1.5. The scalar product is distributive.
1.1.5 The scalar product The scalar product, σ, of two vectors, often called the dot product, is deſned as σ = aT b = ab cos(a, b).
(1.8)
Because cos(a, b) = cos(b, a), the scalar product is a commutative operation σ = aT b = bT a.
(1.9)
Furthermore, it is a distributive operation σ = aT (b + c) = aT b + aT c,
σ = (a + b)T c = aT c + bT c.
(1.10)
This property follows from the fact that b + c cos(a, b + c) = b cos(a, b) + c cos(a, c), as illustrated in ſg. 1.5. The scalar product of a vector by itself yields the square of its norm, aT a = a2 = a2 . Statement aT b = 0 implies that either a = 0 or b = 0, or a is orthogonal to b. The condition for the orthogonality of two vectors is aT b = 0,
(1.11)
provided that neither vector is null. The projection ρ of a vector a along a unit direction n ¯ is readily expressed in terms of the scalar product as ρ = aT n ¯ = a cos(a, n ¯ ).
(1.12)
6
1 Vectors and tensors
1.1.6 Orthonormal bases Figure 1.6 depicts an orthonormal basis, I, deſned by a set of three mutually orthogonal free unit vectors, ¯ı1 , ¯ı2 , and ¯ı3 . Orthonormal bases, also called Cartesian bases, will be indicated with the following notation, I = (¯ı1 , ¯ı2 , ¯ı3 ). In view of this deſnition, it is clear that ¯ıT1 ¯ı1 = ¯ıT2 ¯ı2 = ¯ıT3 ¯ı3 = 1 and ¯ıT1 ¯ı2 = ¯ıT2 ¯ı3 = ¯ıT3 ¯ı1 = 0. These relationships can be summarized as i3 ¯ıTi ¯ıj = δij , (1.13) a i a 2 3 I where δij is the Kronecker’s symbol deſned as a 1 i1 a2 1, i = j, (1.14) δij = 0, i = j. Fig. 1.6. An orthonormal basis I.
As shown in ſg. 1.6, an arbitrary vector, a, can be decomposed in the following manner a = (aT ¯ı1 )¯ı1 + (aT ¯ı2 )¯ı2 + (aT ¯ı3 )¯ı3 = a1¯ı1 + a2¯ı2 + a3¯ı3 ,
(1.15)
where a1 , a2 , and a3 are the projections, eq. (1.12), of vector a along unit vectors ¯ı1 , ¯ı2 , and ¯ı3 , respectively. The components of vector a resolved in orthonormal basis I are the projection of the vector along the unit vectors of the basis, ai = aT ¯ıi , i = 1, 2, 3. The following notation is used ⎧ ⎫ ⎨ a1 ⎬ a[I] = a2 . (1.16) ⎩ ⎭ a3 Notation a is used to indicate a free vector, and notation a[I] indicates the components of vector a resolved in basis I. The components of a vector consist of a set of three number, which are arranged in a column array, as shown in eq. (1.16). Braces are used to indicate a column array. The transpose of the column array is a row array and is denoted with a superscript, (·)T . The following notation will be used
a[I]T = a1 a2 a3 ,
T
or a[I] = a1 a2 a3 .
The components of the unit vectors ¯ı1 , ¯ı2 , and ¯ı3 resolved in basis I are ⎧ ⎫ ⎧ ⎫ ⎧ ⎫ ⎨1⎬ ⎨0⎬ ⎨0 ⎬ [I] [I] [I] ¯ı1 = 0 , ¯ı2 = 1 , ¯ı3 = 0 . ⎩ ⎭ ⎩ ⎭ ⎩ ⎭ 0 0 1
(1.17)
(1.18)
Using the properties of an orthonormal basis, eq. (1.13), the scalar product of two vectors becomes
1.1 Free vectors
⎧ ⎫ ⎨b1 ⎬
aT b = a1 b1 + a2 b2 + a3 b3 = a1 , a2 , a3 b2 ⎩ ⎭ b3
7
(1.19)
where bi , i = 1, 2, 3, are the components of b resolved in basis I. For eq. (1.19) to hold, the components of vectors a and b must be evaluated in the same orthonormal basis. The notation for the scalar product, aT b, is a mnemonic notion for the result expressed by eq. (1.19): the scalar product is obtained by multiplying the row array of the components of vector a resolved in basis I by the column array of the components of vector b resolved in the same basis. The operation of computing the components of a vector in a given basis is a fundamental operation. The following expressions are used interchangeably: “computing the components of vector a in basis I,” or “expressing vector a in basis I,”or “resolving vector a in basis I.” For sake of brevity, expressions such as “the components of a in I,” or “expressing a in I” will also be used.
1.1.7 The vector product The vector product, c, of two vectors, a and b, often called the cross product, is deſned as c= ab = ab sin(a, b) n ¯,
c=~ ab b
(1.20)
(a, b)
a
A = ||a|| ||b|| sin(a, b)
a where n ¯ is a unit vector normal to both a and b, and oriented according to the rightb hand rule, as depicted in ſg. 1.7. Note that A = ab sin(a, b) represents the area Fig. 1.7. The vector product of vectors a and b. of the parallelogram spanned by vectors a and b; hence, the norm of the vector product equals this area. The vector product is anti-commutative,
ab = −ba.
(1.21)
Indeed, the norms of the two vectors are equal, ab = ba = A, but according to the right-hand rule, unit vector n ¯ will point in opposite directions when the order of vectors a and b is reversed. Furthermore, the vector product is a distributive operation ( a + b)c = ac + bc,
a(b + c) = ab + ac.
(1.22)
This property follows from geometric considerations detailed in ſg. 1.8. Note that vectors ac, bc, and ( a + b)c are all in the plane normal to c. Furthermore, triangles OAB and OA B are similar.
8
1 Vectors and tensors
Plane normal to c
c
b ||a + b||sin(a+b, c)
a ~ ac
A¢
a+b
B
O
||b||sin(b, c) ~ bc
A ||a||sin(a, c) ~ ~ B¢ (a + b)c
Fig. 1.8. The vector product is distributive.
Statement ab = 0 implies that either a = 0 or b = 0, or a is parallel to b. The condition for the parallelism of two vectors is ab = 0,
(1.23)
provided that neither vector is null. The vector products of the unit vectors deſning an orthonormal basis are readily obtained from the deſnition of the vector product, eq. (1.20), to ſnd ı1¯ı2 = ¯ı3 , ı3¯ı1 = ¯ı2 , ı2¯ı3 = ¯ı1 , ı2¯ı1 = −¯ı3 , ı1¯ı3 = −¯ı2 , and ı3¯ı2 = −¯ı1 . Of course, the cross product of a vector by itself vanishes. These relationships can be summarized as follows ıi¯ıj = ijk¯ık , (1.24) where summation is implied over the repeated indices, and ijk is the Levi-Civita symbol or permutation symbol ⎧ ⎪ ⎨+1, for a cyclic permutation of the indices, (1.25) ijk = −1, for an acyclic permutation of the indices, ⎪ ⎩ 0, for all other cases. The above relationships implicitly assume that vector ¯ı1 , ¯ı2 , and ¯ı3 have been ordered in such a manner that eqs. (1.24) hold. Such bases are call right-hand bases and will be used exclusively in this book. If ai , bi , and ci , i = 1, 2, 3, are the components of vectors a, b, and c, respectively, resolved in a common basis I, the following relationship holds c = c1¯ı1 + c2¯ı2 + c3¯ı3 = ab = (a2 b3 − a3 b2 )¯ı1 + (a3 b1 − a1 b3 )¯ı2 + (a1 b2 − a2 b1 )¯ı3 , where eqs. (1.22) and (1.24) are used. Taking the scalar product of this expression by ¯ı1 , ¯ı2 , and ¯ı3 then yields
1.1 Free vectors
c[I]
9
⎧ ⎫ ⎧ ⎫ ⎡ ⎤⎧ ⎫ 0 −a3 a2 ⎨b1 ⎬ ⎨c1 ⎬ ⎨a2 b3 − a3 b2 ⎬ = c2 = a3 b1 − a1 b3 = ⎣ a3 0 −a1 ⎦ b2 = a[I] b[I] . (1.26) ⎩ ⎭ ⎩ ⎭ ⎩ ⎭ c3 a1 b 2 − a2 b 1 −a2 a1 0 b3
It is now clear that a is a second-order, skew-symmetric tensor whose components in basis I are ⎡ ⎤ 0 −a3 a2 a[I] = ⎣ a3 0 −a1 ⎦ . (1.27) −a2 a1 0 The notation for the vector product, ab, is a mnemonic notion for the result expressed by eq. (1.26): the vector product is obtained by multiplying the components of the skew-symmetric tensor a resolved in basis I by the column array of the components of vector b resolved in the same basis. 1.1.8 The tensor product The tensor product T of two vectors is a second-order tensor deſned as T = a bT .
(1.28)
The fundamental property of tensor T is T c = (bT c)a,
(1.29)
for any arbitrary vector c. By letting a = ¯ıi and b = ¯ıj , eq. (1.29) then implies ⎤ ⎤ ⎤ ⎡ ⎡ ⎡ 100 000 000 [I] [I]T [I] [I]T [I] [I]T ¯ı1 ¯ı1 = ⎣0 0 0⎦ , ¯ı2 ¯ı2 = ⎣0 1 0⎦ , ¯ı3 ¯ı3 = ⎣0 0 0⎦ , 000 000 001 ⎤ ⎤ ⎤ ⎡ ⎡ ⎡ 010 001 000 [I] [I]T [I] [I]T [I] [I]T ¯ı1 ¯ı2 = ⎣0 0 0⎦ , ¯ı1 ¯ı3 = ⎣0 0 0⎦ , ¯ı2 ¯ı3 = ⎣0 0 1⎦ , 000 000 000 ⎤ ⎤ ⎤ ⎡ ⎡ ⎡ 000 000 000 [I] [I]T [I] [I]T [I] [I]T ¯ı2 ¯ı1 = ⎣1 0 0⎦ , ¯ı3 ¯ı1 = ⎣0 0 0⎦ , ¯ı3 ¯ı2 = ⎣0 0 0⎦ . 000 100 010 [I] [I]T
Letting T [I] represent the components of tensor T [I] = ¯ıi ¯ıj kl can be summarized as T [I] = δki δj . k
, these relationships (1.30)
If ai and bi , i = 1, 2, 3, are the components of vectors a and b, respectively, in a common basis I, the following relationship holds ⎡ ⎤ a1 b 1 a1 b 2 a1 b 3 T [I] = ⎣a2 b1 a2 b2 a2 b3 ⎦ = a[I] b[I]T , (1.31) a3 b 1 a3 b 2 a3 b 3
10
1 Vectors and tensors
where eq. (1.30) was used. The notation for the tensor product, a bT , is a mnemonic notion for the result expressed by eq. (1.31): the tensor product is obtained by multiplying the column array of components of vector a in basis I by the row array of the components of vector b in the same basis. 1.1.9 The mixed product Let a, b, and c be three arbitrary vectors. The scalar cT ab is called the mixed product of these vectors. The geometric interpretation of this operation is illustrated in ſg. 1.9. The vector prodh uct ab = A¯ n is deſned by eq. (1.20), where A represents the area spanned by vectors a and b b and the orientation of unit vector n ¯ is selected ~ according to the right-hand rule. The mixed A = ||a b|| product then becomes cT ab = cA cos(¯ n, c), a where c cos(¯ n, c) = h is the projection of ¯ . It then follows Fig. 1.9. The mixed product of vec- vector c along the unit vector n that cT ab = Ah, where A is the area of the partors a, b, and c. allelogram spanned by vectors a and b and h the height of the parallelepiped deſned by vectors a, b, and c. Clearly, the mixed product represents the volume of this parallelepiped. The above interpretation assumes that vectors a, b, and c are ordered according to the right-hand rule. If this is not the case, it is easily veriſed that the mixed product yields the negative of the volume spanned by the three vectors. If ai , bi , and ci are the components of vectors a, b, and c, respectively, resolved in basis I, the mixed product can be written as ⎡ ⎤ a1 a2 a3 cT ab = det ⎣ b1 b2 b3 ⎦ , (1.32) c1 c2 c3 n c
ab = bT ca = aT bc, where eqs. (1.19) and (1.26) were used. It is now clear that cT since these operations correspond to permutations of lines of the determinant. Of course, due to the anti-commutativity property of the vector product, eq. (1.21), cT ba = bT ac = aT cb. 1.1.10 Tensor identities Important tensor identities will be used throughout this book. If a, b, and c are three arbitrary vectors, the following identities can be readily veriſed by painstakingly expanding the various products,
1.1 Free vectors
( a b) = a b − b a, T a b = b a − (aT b)I, a b − b a = ba − ab , T
T
a b) − (aT b)I, a b − a bT = ( ab c = (aT c)b − (b c)a, a b c = (aT c)b − (aT b)c, T
T
T
a b c = (b c)a, aT b c = bT c a = cT a b.
11
(1.33a) (1.33b) (1.33c) (1.33d) (1.33e) (1.33f) (1.33g) (1.33h)
If n ¯ is a unit vector and a an arbitrary vector, the following identities also hold (aT n ¯ )¯ n=a+n n a, n n n = − n, ˙ n n n = 0,
(1.34a) (1.34b) (1.34c)
where notation (·)· indicates a derivative with respect to time. 1.1.11 Solution of the vector product equation Let a, b, and x be three vectors such that ax = b. a If a and b are known vectors, is it possible to solve x for x? Equation ax = b can be viewed as a set of x¢ three linear equations for the components of x. Unfortunately, the matrix of the system of equations is x¢¢ singular because det( a) = 0; in fact, the null space b P of a is a since aa = 0. Hence, a solution only exists if the right-hand side of the system of equations is orthogonal to the the null space of a, i.e., if aT b = 0. Fig. 1.10. The solution of the Figure 1.10 gives a graphical illustration of the vector product equation. problem. The cross product equation, ax = b, implies that b is orthogonal to both a and x. Let plane P be normal to vector b. Because b is orthogonal to a, plane P contains vector a. Any vector in plane P will be normal to vector b. The solution of the problem must be in plane P and hence, can be written as x = μa + α ab, where μ and α are arbitrary scalars. Introducing this solution into the equation yields ax = a(μa + α ab) = b, or α a ab = b. With the help of identity (1.33b), this becomes α(a aT −a2 I)b = b. Because aT b = 0, the equation then reduces to −αa2 b = b, and ſnally, α = −1/a2 . The solution of the vector product equation is x = μa −
ab , a2
(1.35)
12
1 Vectors and tensors
where coefſcient μ remains undetermined. Clearly, the vector product equation possesses an inſnite number of solutions, because μ is arbitrary. Graphically, this corresponds to the various solution labeled as x or x in ſg. 1.10. To obtain a unique solution, an additional constraint must be enforced. For instance, the solution with the smallest norm is found by imposing the solution to be normal to vector a, leading to μ = 0 and ſnally x = − ab/a2 . 1.1.12 Problems Problem 1.1. Lagrange’s identity
Prove Lagrange’s identity: ab2 + (aT b)2 = a2 b2 .
Problem 1.2. Geometric interpretation of identity Prove identity (1.34a) and provide a geometric interpretation.
Problem 1.3. Geometric interpretation of identity
Prove the following identity cT ab = aT ca, based on (1) geometric arguments, and bc = bT (2) algebraic developments.
Problem 1.4. Jacobi’s identity
With the help of the identities of section 1.1.10, prove Jacobi’s identity ab c+ b c a+ ca b = 0.
Problem 1.5. Prove identity
Prove the following identity a b ba = b a aT b.
Problem 1.6. Prove identity If n ¯ is a unit vector and m an arbitrary vector such that λ = n ¯ T m, prove the following identity n n m +n m n +m n n = −m − 2λ n.
(1.36)
Problem 1.7. Criterion for linear independence Show that three vectors a, b, and c are linearly independent if and only if their mixed product does not vanish.
Problem 1.8. Criterion for parallelism Find the vector equation that expresses the fact that vectors a and b are parallel.
Problem 1.9. Criterion for orthogonality Find the vector equation that expresses the fact that vectors a and b are orthogonal.
Problem 1.10. Criterion for coplanarity Find the vector equation that expresses the fact that vectors a, b, and c are coplanar.
Problem 1.11. The projection tensor Consider a plane, P, deſned by its unit normal, n ¯ , and a free vector a, as depicted in ſg. 1.11. Vector a is decomposed as a = a + a , where a is in plane P and a normal to P. (1) Find the expression for the projection tensor, P , such that a = P a. (2) Find tensor Q such that a = Q a.
1.2 Bound vectors
A
n
a
n
13
a
a¢¢ P
a¢ P
a¢ A¢
Fig. 1.11. Projection of vector a onto plane n ¯.
Fig. 1.12. Reƀection of vector a onto plane n ¯.
Problem 1.12. The reƀection tensor Figure 1.12 depicts plane P deſned by its unit normal n ¯ and a free vector, a. Find the expression for the reƀection tensor R such that a = R a, where a is the reƀection of a with respect the plane P. Note that point A is the mirror image of point A with respect the plane P.
Problem 1.13. The covariant and contravariant components of a vector Consider three non-coplanar vectors a1 , a2 , a3 such that V = aT1 a2 a3 = 0. Deſne the a2 a3 , V a2 = a3 a1 , and V a3 = a1 a2 , called the reciprocal following three vectors, V a1 = vectors. Prove that (1) aTi aj = δij , (2) a1T a2 a3 = 1/V , and (3) V a2 a3 = a1 , V a3 a1 = a2 , 1 2 and V a a = a3 . Two arbitrary vectors, u and v, are now resolved in the following manner u = u1 a1 + u2 a2 + u3 a3 = u1 a1 + u2 a2 + u3 a3 ; v = v 1 a1 + v 2 a2 + v 3 a3 = v1 a1 + v2 a2 + v3 a3 . The components u and v i are called the contravariant components of vectors u and v, respectively, whereas the components ui and vi are called the covariant components of vectors u and v, respectively. Prove that (4) uT v = u1 v 1 + u2 v 2 + u3 v 3 = u1 v1 + u2 v2 + u3 v3 . v = (5) u v/V = (u2 v 3 − u3 v 2 )a1 + (u3 v 1 − u1 v 3 )a2 + (u1 v 2 − u2 v 3 )a3 . (6) V u (u2 v3 − u3 v2 )a1 + (u3 v1 − u1 v3 )a2 + (u1 v2 − u2 v1 )a3 . i
1.2 Bound vectors In section 1.1, free vectors were introduced as the ensemble of all segments equivalent to a given segment. In many practical applications, vectors are associated with a speciſc point in space; in that case they are called bound vectors. For instance, the description of a force applied to a rigid body requires knowledge of the force vector, f , (magnitude and orientation of the applied force), and the point of application of the force, xA . Figure 1.13 depicts a force vector, f , applied to a rigid body at point A; the force vector is a bound vector. On the other hand, a moment, m, applied to a rigid body is not attached to a speciſc point of the body; it is a free vector. Similarly, the angular velocity vector, Ω, is a property of the rigid body. It is not associated with a speciſc point of the body, it is a free vector. The velocity vector, v, describes the velocity at a speciſc point of the body; it is a bound vector.
14
1 Vectors and tensors
e03 A
i3 I
xA O
uP
e3
m
f
i2
Rigid body
i1 Fig. 1.13. A bound vector f , a free vector m, and the position vector xA .
P E0 e01 xP Initial configuration i1
e2 i3 e02 O I
B P
e1
XP xA A
i2 Present configuration
Fig. 1.14. A reference frame deſning the conſguration of a rigid body.
1.2.1 The position vector The position vector, xA , speciſes the position of point A in three-dimensional space with respect to a reference point O, as depicted in ſg. 1.13. The components of vector [I] xA resolved in basis I and denoted xA , are the coordinates of point A in Cartesian basis I. 1.2.2 Reference frames Orthonormal or Cartesian bases were introduced in section 1.1.6 as a set of three mutually orthogonal unit vectors, I = (¯ı1 , ¯ı2 , ¯ı3 ). The origin of this orthonormal basis, however, is not deſned because it consists of three free vectors. Let point O be the common origin of the three unit vectors of the basis. It is now possible to deſne a reference frame, denoted F = [O, I], consisting of an orthonormal basis, I, with its origin at point O, see ſg. 1.14. In dynamic problems, an inertial reference frame is always deſned; the origin and orientation of such frame are invariant in time. Reference frames are conveniently used to deſne position vectors. The position of an arbitrary point A is given by its position vector, xA , with respect to the origin of reference frame F, and the [I] components of this vector, xA , are resolved in basis I. Reference frames are closely related to the conſguration of rigid bodies: let point P be a material point of the rigid body, and orthonormal basis E0 = (¯ e01 , e¯02 , e¯03 ) a body attached basis deſning its orientation. Clearly, the initial conſguration of the rigid body is then completely deſned by reference frame F0 = [P, E0 ], see ſg. 1.14. If the rigid body tumbles in space, it will move to its present conſguration; the position vector of its reference point P is now X P , and its orientation is given by a new basis E = (¯ e1 , e¯2 , e¯3 ). Reference frame F = [P, E] now deſnes the present conſguration of the rigid body. The displacement vector, uP , of point P is such that X P = xP + uP . Clearly, a one to one correspondence exists between a reference frame and the conſguration of a rigid body.
1.3 Geometric entities
15
1.3 Geometric entities Geometric problems can be conveniently formulated using a vector formalism. Lines, planes, circles, and spheres are brieƀy described in the following sections. 1.3.1 Lines Figure 1.15 depicts a straight line is deſned by the position vector, xP , of an arbitrary ¯ along the direction of the line. A straight point P on the line, and the unit vector, , ¯ line, L, is denoted L = (xP , ). An arbitrary point Q on the line has a position vector, xQ , given by ¯ (1.37) xQ = xP + λ, where λ is an arbitrary scalar. An alternative deſnition of the line is in terms of its Pl¨ucker coordinates [1] deſned as follows k x P ¯ = ¯ . (1.38) Q= ¯ The ſrst part of the Pl¨ucker coordinates, k, deſnes a point of the line, and the second ¯ its orientation.1 Indeed, it is readily shown that x = k. The two vectors part, , P forming the Pl¨ucker coordinates must be orthogonal, i.e., k T ¯ = 0.
(1.39)
Clearly, αQ, where α is an arbitrary scalar such that α = 0, deſnes the same line, Q. n
L
Q Q
l xP
I
O
P
i2
i1 Fig. 1.15. The deſnition of a straight line.
1
d
i3
i3
I
xQ xP O
i1
P
i2
Fig. 1.16. The deſnition of a plane.
Some authors deſne the Pl¨ucker coordinates as QT = ¯T , kT .
16
1 Vectors and tensors
1.3.2 Planes Similarly, a plane is deſned by the position vector, xP , of an arbitrary point P of the plane, and the unit vector, n ¯ , normal to the plane, see ſg. 1.16. Plane P is denoted P = (xP , n ¯ ). An arbitrary point Q of the plane has a position vector, xQ , satisfying the following relationship n ¯ T (xQ − xP ) = 0. (1.40) This equation expresses the condition that vector xQ − xP must lie in plane P, and is therefore normal to n ¯ . The distance between point O and the plane is d = n ¯ T xP , and hence, the equation of a plane becomes n ¯ T xQ = d.
(1.41)
1.3.3 Circles ¯ , normal A circle is deſned by the position vector, xC , of its center, the unit vector, n to the plane of the circle, and its radius, ρ. Circle C is denoted C = (xC , n ¯ , ρ). An arbitrary point Q of the circle has a position vector, xQ , satisfying the following relationships n ¯ T (xQ − xC ) = 0, xQ − xC = ρ, (1.42) ¯ ) and the where the ſrst equation expresses the fact that point Q is in plane (xC , n second that is it at a distance ρ from the center of the circle. 1.3.4 Spheres A sphere is deſned by the position vector, xC , of its center, and its radius, ρ. Sphere S is denoted S = (xC , ρ). An arbitrary point Q of the sphere has a position vector, xQ , satisfying the following relationship xQ − xC = ρ.
(1.43)
Example 1.1. Intersection between two lines Find the point at the intersection of two lines, L1 = (x1 , ¯1 ) and L2 = (x2 , ¯2 ). What is the condition for this intersection to exist? Figure 1.17 shows the two lines and their intersection at point I, assuming, of course, that this intersection exists. Arbitrary points on lines L1 and L2 , denoted y 1 and y2 , respectively, are given by eq. (1.37) as y 1 = x1 + λ1 ¯1 and y 2 = x2 + λ2 ¯2 , respectively. If an intersection point exists, it must be on both lines, which implies the existence of scalars λ1 and λ2 such that xI = x1 + λ1 ¯1 = x2 + λ2 ¯2 , (1.44) where xI is the position vector of the intersection point. Let x21 = x2 − x1 be the position vector of the reference point of line L2 with respect to that of line L1 . Multiplying eq. (1.44) by xT21 1 and xT21 2 yields the two following conditions that must be satisſed for the intersection to exist,
1.3 Geometric entities
L2
l2
x2 i3 i1
i2 I O x1
17
I
x21 L1
l1
Fig. 1.17. Intersection between two lines.
λ1 (¯T1 x 21 ¯2 ) = 0,
λ2 (¯T1 x 21 ¯2 ) = 0.
The ſrst solution of these equations is λ1 = λ2 = 0, which implies xI = x1 = x2 : the reference points of the two lines are identical and this common point is the intersection of the two lines. The second solution is ¯T1 x 21 ¯2 = 0, the vanishing of the mixed product of vectors ¯1 , x21 , and ¯2 . Because the mixed product represent the volume spanned by these three vectors, the vanishing of the mixed product implies the coplanarity of the three vectors. As illustrated by ſg. 1.17, the existence of an intersection point of the two lines does indeed require the coplanarity of vectors ¯1 , x21 , and ¯2 . To determine the location of the intersection point, scalars λ1 and λ2 must be de1 ¯2 ) termined. Multiplying eq. (1.44) by xT1 1 and xT2 2 yields λ2 = (xT1 1 x2 )/(¯T1 x 2 ¯1 ), respectively. Point I is now found as and λ1 = (xT2 2 x1 )/(¯T2 x xT 2 x xT 1 x xI = x1 + ¯T2 ¯1 ¯1 = x2 + ¯T1 ¯2 ¯2 . 2 x 1 x 2 1 1 2 21 ¯2 , must vanish for the intersection to exist, it Because the mixed product, ¯T1 x T T ¯ ¯ ¯ ¯ follows that 1 x 1 2 = 1 x 2 2 . If ¯T1 x 1 ¯2 = ¯T1 x 2 ¯2 = 0, the denominators in the above expressions vanish and the intersection does not exist because the two lines are parallel, 1 ¯2 = 0. In summary, an intersection exists if ¯T1 x 21 ¯2 = 0, implying the coplanarity of vectors ¯1 , x21 , and ¯2 , and 1 ¯2 = 0, implying that the two lines are not parallel. A special case occurs ¯1 = ¯2 = ¯ and x 12 = 0: the two lines are coincident and all points on the line are intersection points. Example 1.2. Intersection between two lines Find the point at the intersection of two lines deſned by their Pl¨ucker coordinates, L1 = (k 1 , ¯1 ) and L2 = (k 2 , ¯2 ). What is the condition for this intersection to exist? Figure 1.17 shows the two lines and their intersection at point I, assuming, of course, that this intersection exists. The intersection point must be a point of both lines, and hence, by deſnition of the Pl¨ucker coordinates, k1 = x I ¯1 and k 2 = x I ¯2 . Multiplying the ſrst equation by ¯T2 and the second by ¯T1 , yields ¯T2 k1 = ¯T2 x I ¯1 and ¯T1 k 2 = ¯T1 x I ¯2 . Subtracting these two expressions then leads to
18
1 Vectors and tensors
k T1 ¯2 + k T2 ¯1 = 0. This is the condition that must be satisſed if an intersection exists. It is left to the reader to verify that the above condition is equivalent to that developed in example 1.1. Next, the location of the intersection point must be evaluated. By deſnition of the Pl¨ucker coordinates, k 1 = x I ¯1 , which can be recast as 1 xI = −k1 . This implies that the position vector of the intersection point is the solution of a vector product equation, see section 1.1.11. Because the solvability condition is satisſed, ¯T1 k1 = 0, the solution can be written as xI = α¯1 + 1 k1 , where α is an arbitrary scalar. Multiplying this equation by k T2 leads to kT2 xI = (k T2 ¯1 )α + k T2 1 k 1 = 0, because k 2 must be orthogonal to xI . Coefſcient α now becomes α = −(k T2 1 k 1 )/(k T2 ¯1 ). The intersection point is now ¯1 k T2 1 k 1 ¯1 k T2 k2 1 1 k 1 xI = − 1 k 1 = − ¯T + 1 k 1 = I − T , T¯ 1 k 2 k 2 1 k 2 ¯1 where identity (1.33b) was used to evaluate the bracketed term. Using this same identity once more leads to xI =
k2 (I − ¯1 ¯T1 )k 1 k2 k k1 k = ¯T 1 = ¯T 2 , T ¯ 1 k 2 1 k 2 2 k 1
where the second equality follows from the orthogonality of the Pl¨ucker coordinates, ¯T1 k 1 = 0. Of course, the existence of the intersection point requires ¯T1 k 2 = 0 or equivalently, ¯T2 k 1 = 0, which imply that the two lines are not parallel. It is left to the reader to verify that the solution found here is identical to that found in example 1.1. Comparing the solution obtained here with that found in example 1.1, it is clear that the use of the Pl¨ucker coordinates provides an elegant and compact solution of the problem. Example 1.3. Intersection between two planes Find the equation of the line at the intersection of two planes, P1 = (x1 , n ¯ 1 ) and P2 = (x2 , n ¯ 2 ). Does this line always exist? Under what conditions do the two planes ¯ coincide? Figure 1.18 shows the two planes and their intersection line, L = (xP , ), assuming, of course, that this intersection exists. Line L must be entirely in both planes P1 and P2 , and hence, must be normal to both n ¯ 1 and n ¯ 2 , which implies ¯2 n 1 n . ¯ = n1 n ¯2
(1.45)
To fully deſne the intersection line, it is also necessary to ſnd one of its point, say point P, as illustrated in ſg. 1.18. This point must belong to both planes, i.e., n ¯ T1 xP = p1 and n ¯ T2 xP = p2 , where p1 and p2 are the distances from point O to planes P1 and P2 , respectively. These two scalar equations are not sufſcient to
1.3 Geometric entities
n1
l
P1
n2 x1
xP
i3 I i1 O
19
P x2 P2
i2
Fig. 1.18. Intersection between two planes.
determine the position of point P unequivocally. A third condition can be added, for instance, imposing that point P be at the shortest distance from point O, implying ¯T xP = 0. ¯ where The position vector of point P will be written as xP = α¯ n1 + β n ¯ 2 + γ , T ¯ α, β, and γ are three unknown scalars. Multiplying this equation by and using the shortest distance condition leads to γ = 0 and hence, xP = α¯ n1 + β n ¯2 . Imposing the remaining two conditions leads to a set of two algebraic equations for coefſcients α and β, which are found as α = p1 − (¯ n1 n nT1 n ¯ 2 )p2 / ¯ 2 2 and T 2 n1 n ¯ 2 )p1 / ¯ 2 . The position vector of point P now becomes n1 n β = p2 − (¯ xP =
nT1 n ¯ 2 )p2 nT1 n ¯ 2 )p1 p1 − (¯ p2 − (¯ n ¯ + n ¯2. 1 2 n1 n ¯2 n1 n ¯ 2 2
¯ 2 = 0, and the intersection line does not exist. If the two planes are parallel, n 1 n Of course, if the two planes are coincident, i.e., n 1 n ¯ 2 = 0 and p1 = p2 , all lines in the plane are intersection lines. Example 1.4. Intersection between two planes Find the Pl¨ucker coordinates of the line at the intersection of two planes. Does this line always exist? Under what conditions do the two planes coincide? Figure 1.18 ¯ assuming, of course, that shows the two planes and their intersection, L = (k, ), this intersection exists. As discussed in example 1.3, the orientation of the intersection line is given by ¯ where x is any point eq. (1.45). By deſnition of the Pl¨ucker coordinates, k = x P , P ¯ on the line. It follows that k must be normal to , and hence, contained in the plane ¯ deſned by unit vectors n ¯ 1 and n ¯ 2 , i.e., k = α1 n ¯ 1 + α2 n ¯2 = x P . ¯ 1 + α2 n ¯ 2 ). This implies that the This equation can be recast as xP = −(α1 n position vector of the intersection point is the solution of a vector product equation, see section 1.1.11. Because the solvability condition is satisſed, ¯T (α1 n ¯ 1 +α2 n ¯2) = 1n ¯ 1 + α2 n ¯ 2 ), where μ is an arbitrary 0, the solution can be written as xP = μ¯+ (α scalar. Multiplying this equation by n ¯ T1 yields 1n n2 = −α2 ¯T n n ¯ T1 xP = p1 = n ¯ T1 (α ¯ 1 + α2 n ¯ 2 ) = α2 n ¯ T1 ¯ 1 n ¯ 2 = −α2 n1 n ¯ 2 .
20
1 Vectors and tensors
It then follows that α2 = −p1 / n1 n ¯ 2 . Multiplying the equation by n ¯ T2 and proceeding similarly yields α1 = p2 / n1 n ¯ 2 , and ſnally k = (p2 n ¯ 1 − p1 n ¯ 2 )/ n1 n ¯ 2 . If the two planes are parallel, n 1 n ¯ 2 = 0, and the intersection line does not exist. Of course, if the two planes are coincident, i.e., n 1 n ¯ 2 = 0 and p1 = p2 , all lines in the plane are intersection lines. Because the Pl¨ucker coordinates, Q, of a line are deſned within a constant, the Pl¨ucker coordinates of the intersection line can be written as ¯ 1 − p1 n ¯2 p2 n Q= . n 1 n ¯2 Comparing the solution obtained here with that found in example 1.3, it is clear that the use of the Pl¨ucker coordinates provides an elegant and compact solution of the problem. 1.3.5 Problems Problem 1.14. Position vector of a point on a line
¯ Find the position vector of an arbitrary A line is deſned by its Pl¨ucker coordinates, L = (k, ). point on line L.
Problem 1.15. Line deſned by two points Find the equation of a line passing through two points P1 and P2 . Does a solution always exist? Under what conditions do multiple solutions arise?
Problem 1.16. Distance from a point to a line
¯ Find the distance between an arbitrary point Q (of position vector xQ ) and a line L = (xP , ). Find the location of point R on line L that is at the shortest distance of point Q.
Problem 1.17. Distance from a point to a line
¯ Find the distance between an arbitrary point Q (of position vector xQ ) and a line L = (k, ). Find the location of point R on line L that is at the shortest distance of point Q.
Problem 1.18. Distance from a point to a plane Find the distance between an arbitrary point Q (of position vector xQ ) and a plane P = ¯ ). Find the location of point R on plane P that is at the shortest distance of point Q. (xP , n
Problem 1.19. Intersection of a line and a plane
¯ and a plane P = (x , n Find the point at the intersection of a line L = (xQ , ) P ¯ ). Does this point always exist? Under what conditions does the line lie in the plane?
Problem 1.20. Intersection of a line and a pane
¯ expressed in terms of Pl¨ucker coordiFind the point at the intersection of a line, L = (k, ), nates, and a plane, P = (xP , n ¯ ). Does this point always exist? Under what conditions does the line lie in the plane?
Problem 1.21. Distance between two lines
Find the distance between two lines L1 = (x1 , ¯1 ) and L2 = (x2 , ¯2 ). Find the locations of points R1 and R2 , on lines L1 and L2 , respectively that are at the shortest distance from each other.
1.3 Geometric entities
21
Problem 1.22. Distance between two lines
Find the distance between two lines L1 = (k1 , ¯1 ) and L2 = (k2 , ¯2 ), expressed in terms of Pl¨ucker coordinates. Find the locations of points R1 and R2 , on lines L1 and L2 , respectively that are at the shortest distance from each other.
Problem 1.23. Plane deſned by three points Find the equation of a plane passing through three points P1 , P2 , and P3 with position vectors x1 , x2 , and x3 , respectively. Does a solution always exist? Under what conditions do multiple solutions arise?
Problem 1.24. Plane deſned by the intersection of two planes Let point P with position vector xP be on the intersection of two given planes P1 = (xP , n ¯1) ¯ 2 ). Find the equation of plane P3 = (xP , n ¯ 3 ) passing through a given point and P2 = (xP , n Q with position vectors xQ and the intersection of planes P1 and P2 .
Problem 1.25. Circle deſned by three points Find circle C = (xC , n ¯ , ρ) deſned by three points P1 , P2 , and P3 with position vectors x1 , x2 , and x3 , respectively. Does a solution always exist?
Problem 1.26. Tangent to a circle Find the position vector xP of point P such that the tangent to circle C = (xC , n ¯ , ρ) at P passes through a given point Q with position vector xQ . Find the conditions for a solution to exist. Is the solution unique?
Problem 1.27. Distance between two circles Find the shortest distance d between two arbitrary circles C1 = (xC1 , n ¯ 1 , ρ1 ) and C2 = (xC2 , n ¯ 2 , ρ2 ). Hint: let xQ1 and xQ2 be the position vectors of points Q1 and Q2 belonging to circles C1 and C2 , respectively. If Q1 and Q2 are at the shortest distance, vector xQ2 − xQ1 is then normal to the tangent to C1 at point Q1 and to the tangent to C2 at point Q2 .
Problem 1.28. Intersection of a line and a sphere
¯ and sphere S = (x , ρ). Find the intersections between line L = (x, ) C
Problem 1.29. Distance from a disk to a plane
¯ ρ), as depicted in ſg. 1.19. Find the Consider plane P = (xP , n ¯ ) and circle C = (xC , k, shortest algebraic distance d between the disk and the plane. (A positive distance is deſned when the disk is in the direction of n ¯ ).
n P
k
aC r
C
v2
b
R d Q
e2
v1 P
Fig. 1.19. The distance between a disk and a plane.
b
e1
Fig. 1.20. Constructing an orthonormal basis from two vectors.
22
1 Vectors and tensors
Problem 1.30. Orthonormal basis constructed from two vectors Figure 1.20 shows two arbitrary vectors, v 1 and v 2 . Construct a set of three mutually orthogonal unit vectors, e¯1 , e¯2 , e¯3 , such that e¯1 , e¯2 , v 1 , and v 2 are four coplanar vectors, and angle β between e¯1 and v 1 is identical to that between e¯2 and v 2 . Find an expression for angle β.
1.4 Second-order tensors Second-order tensors were encountered in previous sections: the tensor product of two vectors, eq. (1.28), yields a second-order tensor, and the vector product of two vector is conveniently expressed in terms of the second-order, skew-symmetric tensor deſned by eq. (1.27). In general, the components of a second-order tensor, A, are denoted aij , where the indices i = 1, 2, 3 and j = 1, 2, 3. A second-order tensor is said to be a symmetric tensor if aij = aji . For instance, it is readily veriſed that the tensor product of a vector by itself, T = a aT , forms a symmetric tensor. A second-order tensor is said to be a skew-symmetric tensor if aij = −aji . This implies that the diagonal terms vanish, aii = 0, i = 1, 2, 3. Skew-symmetric tensors were encountered when dealing with the vector product, see eq. (1.27). The superscript (·)T is used to denote the transposition operation. If the components of A are aij , the components of AT are aji . 1.4.1 Basic operations The trace of a second-order tensor is a scalar deſned as tr(A) = a11 + a22 + a33 .
(1.46)
The determinant of a second-order tensor is also a scalar quantity deſned as det(A) = a11 a22 a33 + a12 a23 a31 + a13 a21 a32 − a31 a22 a13 − a12 a21 a33 − a11 a23 a32 .
(1.47)
An arbitrary tensor can always be decomposed into its symmetric part and skewsymmetric part A=
A − AT A + AT + = symm(A) + skew(A). 2 2
(1.48)
In this equation, symm(A) denoted the symmetric part of the tensor ⎤ ⎡ 2a11 a12 + a21 a13 + a31 A + AT 1⎣ = symm(A) = a12 + a21 2a22 a23 + a32 ⎦ , 2 2 a13 + a31 a23 + a32 2a33 and skew(A) its skew-symmetric part
(1.49)
1.4 Second-order tensors
skew(A) =
A − AT 2
⎤ 0 (a12 − a21 ) (a13 − a31 ) 1 = ⎣−(a12 − a21 ) 0 (a23 − a32 )⎦ . 2 −(a13 − a31 ) −(a23 − a32 ) 0
23
⎡
(1.50)
The axial vector, a, associated with a second-order tensor, A, is denoted a = axial(A). It is deſned as follows a = axial(A) ⇐⇒ a=
A − AT . 2
(1.51)
It is readily veriſed that
⎧ ⎫ ⎫ ⎧ ⎨a1 ⎬ 1 ⎨a32 − a23 ⎬ a13 − a31 . a = axial(A) = a2 = ⎩ ⎭ 2⎩ ⎭ a3 a21 − a12
(1.52)
A second-order tensor, T , is positive-deſnite if and only if uT T u > 0,
(1.53)
for any arbitrary vector u = 0. It is semi positive-deſnite if uT T u ≥ 0 for any vector u = 0. For instance, consider the tensor corresponding to the tensor product of a vector by itself, T = a aT , a = 0. This tensor is semi positive-deſnite because uT T u = (aT u)2 ≥ 0 for any choice of u = 0; the equality hold when a is normal to u. 1.4.2 Eigenvalue analysis More often than not, the complete analysis of a second-order tensor will require the evaluation of its eigenvalues and eigenvectors. The following relationship A u = λu,
(1.54)
is satisſed by eigenvector u corresponding to eigenvalue λ. This relationship can be recast as (A − λI)u = 0, where I is the identity tensor, i.e., Iij = δij . This means that the eigenvector is the solution of a homogeneous system of algebraic equations. In general, this solution is the trivial solution, u = 0. For a non-trivial solution to exist, the determinant of the set of linear equations must vanish, det(A − λI) = 0. This equation is called the characteristic equation satisſed by the eigenvalue of A; with the help of eq. (1.47), it expands to −λ3 + I1 λ2 − I2 λ + I3 = 0.
(1.55)
I1 , I2 , and I3 are the invariants of the tensor I1 = tr(A),
(1.56a)
I2 = a22 a33 + a33 a11 + a11 a22 − a23 a32 − a13 a31 − a12 a21 , I3 = det(A).
(1.56b) (1.56c)
24
1 Vectors and tensors
Equation (1.55) will yield three solutions λ1 , λ2 , and λ3 , called the eigenvalues of A. One eigenvalue is always real, the other two could be real, or a complex conjugate pair. To each eigenvalue corresponds an eigenvector, u; the eigenpairs are denoted (λ1 , u1 ), (λ2 , u2 ), and (λ3 , u3 ). Because the eigenvectors are the solution of a homogeneous, linear system, they are deſned within a multiplicative constant. If an eigenvalue is real, the corresponding eigenvector is also real. A complex conjugate pair of eigenvectors is associated with complex conjugate eigenvalues. Symmetric, positive-deſnite tensors In general, a real second-order tensor will have one real eigenvalue and the remaining two could be real, or form a complex conjugate pair. If the tensor is symmetric and positive-deſnite, however, all three eigenvalues must be real and positive. Indeed, assume λ is √ a complex eigenvalue and u = v + iw the corresponding eigenvector, where i = −1. The eigenproblem, eq. (1.54), now becomes A(v + iw) = λ(v + iw). Pre-multiplying by vector (v − iw)T leads to (v T A v + w T A w) + i(v T Aw − w T A v) = λ(v T v + wT w).
(1.57)
If tensor A is symmetric, v T A w = wT A v, and the term in the second parenthesis vanishes. It then follows that λ=
vT A v + wT A w . vT v + wT w
(1.58)
Because A, v, and w are real quantities, λ is also a real quantity. It follows that the eigenvalues of a real, symmetric tensor are all real. The original eigenproblem, A(v + iw) = λ(v + iw), splits into its real and imaginary parts, A v = λv and iA w = iλw, respectively. Clearly the two problems are identical and the imaginary part is redundant; nothing is lost by setting w = 0. The eigenvalue now becomes vT A v λ= T . (1.59) v v If A is a positive-deſnite tensor, the numerator is a positive number, see eq. (1.53). On the other hand, the denominator is always a positive number. This proves that the eigenvalues of a real, symmetric, positive-deſnite tensor are all real and positive. If the tensor is symmetric and semi positive-deſnite, its eigenvalues are null or positive. Similarity transformations Consider now a linear transformation of the form u = Q u ¯ , where Q is an orthogonal tensor, i.e., QT Q = I. This transformation is applied to the eigenproblem A u = λu to yield A Q u ¯ = λQ¯ u. Pre-multiplying by QT then leads to QT A Q u ¯ = λQT Q u ¯. Because Q is an orthogonal transformation, this becomes
1.4 Second-order tensors
where
25
¯ = λ¯ u, A¯ u
(1.60)
A¯ = QT A Q,
(1.61)
is a similarity transformation of the original tensor. The transformed eigenproblem has the same form as the original problem, and the relationships between the eigenvalues of the two problems is sought. The eigenvalues of the original and transformed problems are the solutions of the characteristic equations det(A − λI) = 0 and det(A¯ − λI) = 0, respectively. Because Q is an orthogonal tensor, the latter equation can be stated as det QT (A − λI)Q = 0. Since the determinant of a product equals the product of the determinant, this becomes det(QT ) det(A − λI) det(Q) = 0. The orthogonality of Q implies det(Q) = 1; indeed det(QT Q) = det2 (Q) = 1. Finally, the characteristic equation of the transformed problem becomes det(A − λI) = 0, the same as that of the original problem. Consequently, the eigenvalues of the two problems are identical; similarity transformations preserve the spectrum of eigenvalues and the corresponding eigenvectors are related as ui = Q u ¯i. Orthogonality of the eigenvectors Consider a symmetric tensor, A, and two of its eigenpairs, (λi , ui ) and (λj , uj ), satisfying relationships A ui = λi ui , and A uj = λj uj , respectively. Pre-multiplying the ſrst statement by uj and the second by uj leads to uTj A ui = λi uTj ui and uTi A uj = λj uTi uj , respectively. Subtracting these two equations results in (λi − λj )uTj ui = 0, where the symmetry of tensor A was invoked. If λi = λj , uTj ui = 0: the eigenvectors of a symmetric tensor associated with distinct eigenvalues are orthogonal to each other. The orthogonality of the eigenvectors also implies their orthogonality in the space of tensor A, uTj A ui = 0. If the symmetric tensor possesses three distinct eigenvalues, the corresponding eigenvectors form an orthogonal triad: P = [u1 , u2 , u3 ]. Because the eigenvectors are deſned within a multiplicative constant, it is possible to normalize this orthogonal triad and impose P T P = I. This does not completely remove the indeterminacy of the eigenvectors that could still be multiplied by ±1. It is customary to order the eigenvectors in such a way that they form a right-hand basis. With this normalization of the eigenvector, it follows that ⎡ ⎤ λ1 0 0 P T A P = P T λ1 u1 , λ2 u2 , λ3 u3 = ⎣ 0 λ2 0 ⎦ . (1.62) 0 0 λ3 The orthogonality of the eigenvectors is a very important property that has been proved, thus far, for distinct eigenvalues only. What happens if a tensor features repeated eigenvalues, a common occurrence? To be precise, let eigenvalue λ1 have a
26
1 Vectors and tensors
multiplicity of 2. First, an eigenvector, u1 , associated with this eigenvalue is evaluated; next, the following linear transformation is constructed Q = [u1 , qˆ], where Q is an orthogonal matrix; this implies uT1 qˆ = 0. Since u1 is an eigenvector, it is also true that qˆT u1 = qˆT A u1 = 0. A similarity transformation, see eq. (1.61), of the original problem is performed to ſnd T u1 A u1 uT1 A qˆ λ1 0 uT1 A¯ = T A u1 qˆ = T = . (1.63) qˆ 0 qˆT A qˆ qˆ A u1 qˆT A qˆ By construction, the eigenvalues of A¯ are identical to those of A. Hence, λ1 is an
¯T1 = 1, 0, 0 ) eigenvalue of A¯ with a multiplicity of 2. The ſrst eigenpair is (λ1 , u
¯ T and the second is (λ1 , u ¯ 2 is the eigenvector of the reduced ¯ T2 = 0, u 2 ), where u T tensor qˆ A qˆ associated with its single eigenvalue λ1 ; note that u ¯ T1 u ¯2 = 0. Two eigenvectors of the original problem are now u1 = Q u ¯1 = u1 , by construction, and u2 = Q u ¯2 = qˆ u ¯2 . Finally, the orthogonality of the eigenvectors of the transformed ¯2 = problem implies that of their counterparts for the original problem: 0 = u ¯T1 u T T T u ¯1 Q Q u ¯ 2 = u1 u2 . In summary, in the presence of repeated eigenvalues, orthogonal eigenvectors can be always extracted. For eigenvalues of multiplicity 3, the above development could be recursively applied to extract three orthogonal eigenvectors of the symmetric tensor. The orthogonal tensor, P = [u1 , u2 , u3 ], always exists and presents the important property of diagonalizing tensor A P T A P = diag(λi )
(1.64)
Example 1.5. Eigen analysis of the projection tensor Figure 1.11 depicts an arbitrary vector a and a plane P deſned by its unit normal n ¯. The projection tensor P is such that a = P a, where a is the projection of vector a onto plane P. Find the three eigenvalues of P and the corresponding eigenvectors. nT a)¯ n + a . It then follows that a = Inspection of ſg. 1.11 reveals that a = (¯ T T a−n ¯n ¯ a = (I − n ¯n ¯ )a, and hence, the projection tensor is ⎡
⎤ 1 − n21 −n1 n2 −n1 n3 P =I −n ¯n ¯ T = ⎣−n1 n2 1 − n22 −n2 n3 ⎦ . −n1 n3 −n2 n3 1 − n23
(1.65)
The projection tensor is symmetric and semi positive-deſnite. Indeed, aT (I − n ¯n ¯ T )a = aT a − (¯ nT a)2 = a2 − a2 cos2 α, where α is the angle between vectors n ¯ and a. It follows that aT P a = a2 sin2 α ≥ 0 for any arbitrary vector ¯ . It a = 0. Note that aT P a = 0 when α = 0, i.e., when vector a is parallel to n follows that the eigenvalues of P must be real and greater or equal to zero. One eigenvector of P can be found by inspection: P n ¯ = (I − n ¯n ¯ T )¯ n=n ¯ −n ¯= 0. This implies that vector n ¯ is an eigenvector of the projection tensor corresponding
1.5 Tensor calculus
27
to an eigenvalue λ = 0. The invariants of P are readily found as I1 = 2, I2 = 1 and I3 = 0. The eigenvalues then are the solutions of the characteristic equation −λ3 + 2λ2 − λ = 0 or λ(λ − 1)2 = 0. The eigenvalues are λ1 = 0, λ2 = +1 and λ3 = +1; note the multiplicity of two of the unit eigenvalue. As discussed above, the eigenvector corresponding to the null eigenvalue λ1 = 0 is the unit vector u1 = n ¯ . The eigenvectors corresponding to the double unit eigenvalue are the solution of the homogeneous linear problem (I − n ¯n ¯ T − I)x = 0 or T n ¯n ¯ x = 0. Clearly, any vector orthogonal to n ¯ will satisfy this equation. In other words, any vector u2 in plane P, i.e., such that n ¯ T u2 = 0, is an eigenvector. This implies P u2 = u2 , a result that is readily veriſed: (I − n ¯n ¯ T )u2 = u2 if n ¯ T u2 = 0. In geometric terms, this result is obvious: if vector u2 lie in plane P, the projection of that vector onto the plane is the vector itself. In view of the multiplicity of two of the unit eigenvalue, the eigenvector corresponding to λ3 is identical to that corresponding to λ2 : an arbitrary vector in plane P. It is, however, always possible to ſnd an orthogonal vector by selecting u3 = n u2 . In summary, the three eigenvectors of the projection tensor are u1 = n, the normal to plane P, u2 an arbitrary vector in P, and u3 = n u2 . Clearly, the eigenvectors capture the essence of the projection tensor: u ¯1 is the direction normal to the plane, and u2 and u3 are two orthogonal directions within this plane. The multiplicity of two of the unit eigenvector results in the fact that u2 can be chosen arbitrarily within plane P. Geometrically, this is related to the isotropy of the projection tensor: it behaves in the same manner in all direction within plane P. Finally, note that P = P P : once a vector has been projected onto the plane, any subsequent application of the projection tensor will leave the vector unchanged. 1.4.3 Problems Problem 1.31. Solve linear system Solve the following equation for x, x a = b − x.
Problem 1.32. Compute inverse
Show that (I + a)−1 = (I + a aT − a)/(1 + a2 )
Problem 1.33. Eigenvalues of the reƀection tensor Figure 1.12 depicts an arbitrary vector a and plane P, deſned by its unit normal n ¯ . (1) Find the expression for the reƀection tensor, R, such that a = R a, where vector a is the reƀection of vector a with respect the plane P. Note that point A is the mirror image of point A with respect the plane P. (2) Is the reƀection tensor positive-deſnite? (3) By inspection of R ſnd one of its eigenvectors and the corresponding eigenvalue. (4) Compute the three invariants of R. (5) Find the three eigenvalues of R and the corresponding eigenvectors.
1.5 Tensor calculus The derivative of a scalar function s(t) of a single variable, t, say time, is deſned in calculus textbooks (see, for instance, [2]), as
28
1 Vectors and tensors
ds s(t + Δt) − s(t) = s˙ = lim . Δt→0 dt Δt
(1.66)
˙ will be used throughout this book to represent a derivative with The notation (·) respect to time. The derivative of a vector u(t) is deſned in a similar manner as du u(t + Δt) − u(t) = u˙ = lim . Δt→0 dt Δt
(1.67)
The following results stem from elementary rules for derivatives. Derivative of a sum If u(t) and v(t) are two arbitrary vectors d (u + v) = u˙ + v. ˙ dt
(1.68)
Derivative of a product If s(t) is a scalar function of time, d (su) = su ˙ + su. ˙ dt
(1.69)
The derivative of the scalar product becomes d T (u v) = v T u˙ + uT v, ˙ dt
(1.70)
d ( uv) = u ˙ v + u v˙ = u v˙ − vu. ˙ dt
(1.71)
and that of the vector product
Chain rule for differentiation If vector u is a function of a scalar function s(t), the time derivative of this vector becomes du ds d du (u(s(t))) = = s˙ . (1.72) dt ds dt ds As an application of the above rules, consider the derivative of a unit vector, i.e., vector u such that uT u = 1. Equation (1.70) then implies d T (u u) = 2uT u˙ = 0. dt
(1.73)
In other words: the derivative of a unit vector is orthogonal to the vector itself. Next, consider two mutually orthogonal vector u and v, uT v = 0. A derivative of this expression then yields uT v˙ = −v T u. ˙ (1.74)
1.6 Notational conventions
29
1.6 Notational conventions Several notational conventions are used in the literature to denote vectors and tensors. Three widely used notations, the geometric notation, the matrix notation, and the index notation [3] are presented in table 1.1. The geometric notation is widely used in the literature, sometimes the boldface notation for vectors is replaced by a → speciſc “vector” superscript: − a . The index notation is frequently used, specially when higher-order tensors must be manipulated such as in the theory of elasticity. It is, however, less often used in kinematics and dynamics. The matrix notation is a convenient mnemonic notation and will be used exclusively in this book. Vectors are denoted with an underline, u, but unit vectors are simply denoted n ¯ , rather than the more cumbersome n ¯ . Tensors are denoted by a double underline, A, but skew-symmetric tensors are denoted a, rather than the more cumbersome a. Note that the tensor product, u v T , also yields a tensor. Table 1.1. The geometric, matrix, and index notations for vectors and tensors. Geometric Matrix Index notation notation notation vector a a ai tensor A A Aij scalar product u·v uT v ui vi vector product u × v u v ui vj ijk tensor product u ⊗ v u vT ui vj
In practical situations, such computer implementations, it will be necessary to work with the components of speciſc tensors resolved in various bases. In such cases, the following notation will be used ⎧ ⎫ ⎨ a1 ⎬ a[I] = a2 , ⎩ ⎭ a3 where a1 , a2 , and a3 are the components of vector a resolved in basis I. Because the notation a[I] is rather cumbersome, it will be used only when necessary; for instance, when the components of a vector in two different bases are used in the same context. When there is no possible confusion, the notation a[I] will be simpliſed as a, thereby blurring the distinction between a vector and its components in a given basis.
2 Coordinate systems
The practical description of dynamical systems involves a variety of coordinates systems. While the Cartesian coordinates discussed in section 2.1 are probably the most commonly used, many problems are more easily treated with special coordinate systems. The differential geometry of curves is studied in section 2.2 and leads to the concept of path coordinates, treated in section 2.3. Similarly, the differential geometry of surfaces is investigated in section 2.4 and leads to the concept of surface coordinates, treated in section 2.5. Finally, the differential geometry of three-dimensional maps is studied in section 2.6 and leads to orthogonal curvilinear coordinates developed in section 2.7.
2.1 Cartesian coordinates The simplest way to represent the location of a point in three-dimensional space is to make use of a reference frame, F = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )], consisting of an orthonormal basis I with its origin and point O, as described in section 1.2.2. The time-dependent position vector of point P is represented by its Cartesian coordinates, x1 (t), x2 (t), and x3 (t), resolved along unit vectors, ¯ı1 , ¯ı2 , and ¯ı3 , respectively, r(t) = x1 (t)¯ı1 + x2 (t)¯ı2 + x3 (t)¯ı3 ,
(2.1)
i3 P r I
x3
i2
O x1
i1 x2
Fig. 2.1. Cartesian coordinate system.
where t denotes time. Figure 2.1 depicts the situation: Cartesian coordinate x1 = ¯ıT1 r is the projection of the position vector of point P along unit vector ¯ı1 . Similarly, Cartesian coordinates x1 and x2 are the projections of the same position vector along unit vectors ¯ı2 and ¯ı3 , respectively. The components of the velocity vector are readily obtained by differentiating the expression for the position vector, eq. (2.1), to ſnd
O. A. Bauchau, Flexible Multibody Dynamics, DOI 10.1007/978-94-007-0335-3_2 © Springer Science+Business Media B.V. 2011
32
2 Coordinate systems
v(t) = x˙ 1 (t)¯ı1 + x˙ 2 (t)¯ı2 + x˙ 3 (t)¯ı3 = v1 (t)¯ı1 + v2 (t)¯ı2 + v3 (t)¯ı3 .
(2.2)
The Cartesian components of the velocity vector are simply the time derivatives of the corresponding Cartesian components of the position vector: v1 (t) = x˙ 1 (t), v2 (t) = x˙ 2 (t), and v3 (t) = x˙ 3 (t). Finally, the acceleration vector is obtained by taking a time derivative of the velocity vector to ſnd a(t) = x ¨1 (t)¯ı1 + x¨2 (t)¯ı2 + x ¨3 (t)¯ı3 = a1 (t)¯ı1 + a2 (t)¯ı2 + a3 (t)¯ı3 .
(2.3)
Here again, the Cartesian components of the acceleration vector are simply the derivatives of the corresponding Cartesian components of the velocity vector, or the second derivatives of the position components: a1 (t) = v˙ 1 (t) = x ¨1 (t), a2 (t) = v˙ 2 (t) = x ¨2 (t), and a3 (t) = v˙ 3 (t) = x¨3 (t). Cartesian coordinates are simple to manipulate and are the most commonly used coordinate system in computational applications that deal with problems presenting arbitrary topologies. On the other hand, several other coordinate systems, such as those discussed in the rest of this chapter, are often used because they can ease the solution process for speciſc problems. In such cases, a speciſc coordinate system is used solve a speciſc problem. For instance, polar coordinates are very efſcient to describe the behavior of a particle constrained to move along a circular path.
2.2 Differential geometry of a curve This section investigates the differential geometry of a curve, leading to the concept of path coordinates. Both intrinsic and arbitrary parameterizations will be considered. Frenet’s triad is deſned and its derivatives evaluated. 2.2.1 Intrinsic parameterization h s
t
i3 p0 I
b n
C
i2 i1
Fig. 2.2. Conſguration of a curve in space.
Figure 2.2 depicts a curve, denoted C, in threedimensional space. A curve is the locus of the points generated by a single parameter, such that the position vector, p0 , of such points can be written as p0 = p0 (s),
(2.4)
where s is the parameter that generates the curve. If parameter s is the curvilinear coordinate that measures length along the curve, it is said to deſne the intrinsic parameterization or natural parameterization of the curve.
Frenet’s triad A differential element of length, ds, along the curve is written as ds2 = dpT0 dp0 , and in follows that (dp0 /ds)T (dp0 /ds) = 1. The unit tangent vector to the curve is deſned as
2.2 Differential geometry of a curve
33
dp0
. (2.5) ds By construction, this is a unit vector because t¯T t¯ = 1. Taking a derivative of this relationship with respect to the curvilinear coordinate leads to t¯T dt¯/ds = 0. Vector dt¯/ds is normal to the tangent vector. The unit normal vector to the curve is deſned as dt¯ (2.6) n ¯=ρ , ds where ρ is the radius of curvature of the curve, such that t¯ =
1 dt¯ = . ρ ds
(2.7)
The quantity 1/ρ is the curvature of the curve, and ρ its radius of curvature. The two unit vector, t¯ and n ¯ , are said to form the osculating plane of the curve. An orthonormal triad is now constructed by deſning the binormal vector, ¯b, as the cross product of the tangent by the normal vectors, ¯b = tn ¯.
(2.8)
The unit tangent, normal, and binormal vectors form an orthonormal triad, called Frenet’s triad, depicted in ſg. 2.2. Derivatives of Frenet’s triad First, the derivative of the normal vector is resolved in Frenet’s triad as d¯ n/ds = αt¯+ β n ¯ + γ¯b, where α, β, and γ are unknown coefſcients. Pre-multiplying this relationship by n ¯ T yields β = n ¯ T d¯ n/ds = 0, because n ¯ is a unit vector. Pre-multiplying by t¯T yields α = t¯T d¯ n/ds = −¯ nT dt¯/ds = −1/ρ, where eq. (2.6) was used. Finally, pre-multiplying by ¯bT yields γ = ¯bT d¯ n/ds = 1/τ . Combining all these results yields d¯ n 1 1 = − t¯ + ¯b, (2.9) ds ρ τ where τ is the radius of twist of the curve, deſned as n 1 ¯T d¯ =b . τ ds
(2.10)
Next, the derivative of the binormal vector is resolved in Frenet’s triad as d¯b/ds = αt¯+ β n ¯ + γ¯b, where α, β, and γ are unknown coefſcients. Pre-multiplying this relationship by ¯bT yields γ = ¯bT d¯b/ds = 0, because ¯b is a unit vector. Premultiplying by t¯T yields α = t¯T d¯b/ds = −¯bT dt¯/ds = −¯bT n ¯ /ρ = 0. Finally, premultiplying by n ¯ T yields β = n ¯ T d¯b/ds = −¯bT d¯ n/ds = −1/τ , where eq. (2.10) was used. Combining all these results yields d¯b 1 =− n ¯. ds τ
(2.11)
34
2 Coordinate systems
It follows that the twist of the curve can also be written as d¯b 1 = . τ ds
(2.12)
If the binormal vector has a constant direction at all points along the curve, d¯b/ds = 0, and the curve entirely lies in the plane deſned by vectors t¯ and n ¯ , i.e., the osculating plane is the same at all points of the curve. The curve is then a planar curve, and eq. (2.12) implies that 1/τ = 0, i.e., the twist of the curve vanishes. The derivatives of Frenet’s triad can be expressed in a compact manner by combining eqs. (2.6), (2.9), and (2.11), ⎧ ⎫ ⎡ ⎤⎧ ⎫ 0 1/ρ 0 ⎨ t¯⎬ t¯ d ⎨ ⎬ ⎣ ¯ . n ¯ = −1/ρ 0 1/τ ⎦ n (2.13) ⎩¯ ⎭ ds ⎩ ¯ ⎭ b 0 −1/τ 0 b
2.2.2 Arbitrary parameterization The previous section has developed a representation of a curve based on its natural or intrinsic parameterization. In many instances, however, this parameterization is difſcult to obtain; instead, the curve is deſned in terms of a single parameter, η, that does not measure length along the curve, see ſg. 2.2. The position vector of a point on the curve is now p0 = p0 (η). The derivatives of the position vector with respect to parameter η will be denoted as p1 =
dp0 dη
,
p2 =
d2 p0 dη 2
,
p3 =
d3 p0 dη 3
,
p4 =
d4 p0 dη 4
.
A similar notation will be used for the tangent and normal vectors, di t¯ t¯i = i , dη
n ¯i =
di n ¯ . dη i
The differential element of length along the curve can be written as ds2 = (dp0 /dη)T (dp0 /dη) dη 2 . The ratio of the increment in length along the curve, ds, to the increment in parameter value, dη, is then ds T = p1 p1 = p1 . dη
(2.14)
Notation (·) will be used to indicate a derivative with respect to η, and hence, d/ds = (·) /p1 . The unit tangent vector to the curve is evaluated with the help of eq. (2.5) as p t¯ = 1 (2.15) p1 Next, the derivative of the tangent vector is found as
2.2 Differential geometry of a curve
t¯1 =
p1 p2 − p1 (pT1 p2 )/p1 p21
=
1 1 p2 − (t¯T p2 )t¯ . (1 − t¯t¯T )p2 = p1 p1
35
(2.16)
From eq. (2.7), the radius of curvature now becomes dt¯ 1 1 = = t¯1 . ρ ds p1 It follows that t¯1 = t1 = p1 /ρ. For a straight line, the tangent vector has a ſxed direction in space, t¯1 = 0. It follows that for a straight line 1/ρ = 0, i.e., its radius of curvature is inſnite. The curve’s curvature is found to be p21 p22 − (pT2 p1 )2 1 = (2.17) ρ p31 Higher-order derivatives of the tangent vector are found in a similar manner 1 p3 − (t¯T p3 + t¯T1 p2 )t¯ − 2(t¯T p2 )t¯1 , t¯2 = p1 and 1 p4 − (t¯T p4 + 2t¯T1 p3 + t¯T2 p2 )t¯ − 3(t¯T p3 + t¯T1 p2 )t¯1 − 3(t¯T p2 )t¯2 . t¯3 = p1 Next, the normal vector deſned in eq. (2.6) becomes n ¯=
1 t¯1 = t¯1 . t¯1 t1
(2.18)
For a straight line, t¯1 = 0, and hence, the normal vector is not deſned. In fact, any vector normal to a straight line is a normal vector. The derivative of the normal vector with respect to η then follows as 1 ¯ t2 − (¯ nT t¯2 )¯ n . t1
(2.19)
1 ¯ nT t¯3 + n ¯ T1 t¯2 )¯ n − 2(¯ nT t¯2 )¯ n1 . t3 − (¯ t1
(2.20)
n ¯1 = The second-order derivative is then n ¯2 =
The binormal vector is readily expressed as ρ 1 ¯ ¯b = t t1 = 3 p1 p2 . tn ¯= t1 p1
(2.21)
Because the normal vector is not deſned for a straight line, the binormal vector is not deſned in that case. In fact, any vector normal to a straight line is a binormal vector. The derivative of the binormal vector becomes
36
2 Coordinate systems
¯b1 = ( ρ ) p1 p + ρ p1 p . 2 3 p31 p31
(2.22)
Using eq. (2.10), the twist of the curve is found to be 1 T¯ 1 ρ =− n ¯ b1 = − 5 p21 pT2 − (pT1 p2 )pT1 ¯b1 . τ p1 p1 Finally, introducing eq. (2.22) leads to 1 ρ2 = − 6 pT2 p1 p3 . τ p1
(2.23)
The twist of the curve is closely related to the volume deſned by vectors p1 , p2 , and p3 . Note that a straight line has a vanishing twist, 1/τ = 0. Derivatives of the binormal vector are more easily expressed as ¯b1 = t1 n ¯ + tn ¯1 = t1 n ¯1 + tn ¯2 = n t¯2 + tn ¯ 2 , where eqs. (2.18) and (2.19) were used. tn ¯ 1 , and ¯b2 = Example 2.1. The helix Figure 2.3 depicts a helix, which is a three-dimensional curve deſned by the following position vector p0 (η) = a cos η ¯ı1 + a sin η ¯ı2 + kη ¯ı3 ,
(2.24)
where a and k are two parameters deſning the shape of the curve. The derivatives of the position vector are p1 = −a sin η ¯ı1 + a cos η ¯ı2 + k ¯ı3 , p2 = −a cos η ¯ı1 − a sin η ¯ı2 , and p3 = a sin η ¯ı1 − a cos η ¯ı2 . The curvature and twist of the helix are found with the help of eqs. (2.17) and (2.23), respectively, as 1 a , = 2 ρ a + k2
1 k . = 2 τ a + k2
Note that both curvature and twist are constant along the helix. The unit tangent vector is evaluated with the help of eq. (2.15) as 1 1 p1 = √ (−a sin η¯ı1 + a cos η¯ı2 + k¯ı3 ). t¯ = √ 2 2 2 a +k a + k2
(2.25)
The ratio between an increment √ in length along the curve and the increment in the parameter value is then ds = a2 + k 2 dη, see eq. (2.14). Next, the derivative of the tangent vector is computed with the help of eq. (2.16) as t¯1 = p2 /p1 and the normal vector then follows as n ¯ = − cos η ¯ı1 − sin η ¯ı2 . Finally, the binormal vector found from eq. (2.21) ¯b = √ 1 [k sin η ¯ı1 − k cos η ¯ı2 + a ¯ı3 ] . a2 + k 2 The derivatives of Frenet’s triad are found with the help of eq. (2.13) as a dt¯ = 2 n ¯, ds a + k2
a ¯ k ¯ d¯ n =− 2 b, t+ 2 2 ds a +k a + k2
k d¯b =− 2 n ¯. ds a + k2
2.2 Differential geometry of a curve
i2
i3
r = aq
C
r C
q
i1
i2
a i1
37
h
Fig. 2.3. Conſguration of a helix in threedimensional space.
Fig. 2.4. Conſguration of a planar linear spiral.
Example 2.2. The linear spiral Figure 2.4 depicts a linear spiral, which is a planar curve deſned by the following position vector p0 = aθ cos θ ¯ı1 + aθ sin θ ¯ı2 , (2.26) where a is a parameter deſning the shape of the curve. The derivatives of the position vector are p1 = a [(cos θ − θ sin θ)¯ı1 + (sin θ + θ cos θ)¯ı2 ], p2 = a [−(2 sin θ + θ cos θ)¯ı1 + (2 cos θ − θ sin θ)¯ı2 ]. It is readily veriſed that p21 = a2 (1 + θ2 ), p22 = a2 (4 + θ2 ) and pT1 p2 = a2 θ. The curvature of the linear spiral is found with the help of eq. (2.17) a 2 + θ2 = . ρ (1 + θ2 )3/2 Note that the curvature varies along the spiral. Of course, the twist is zero since the curve is planar. The unit tangent vector is evaluated with the help of eq. (2.15) as (cos θ − θ sin θ)¯ı1 + (sin θ + θ cos θ)¯ı2 √ t¯ = . 1 + θ2 Finally, the normal vector becomes − 2 sin θ + θ cos θ(2 + θ2 ) ¯ı1 + 2 cos θ − θ sin θ(2 + θ2 ) ¯ı2 . n ¯= 4 + θ2 (2 + θ2 )2 Example 2.3. Using polar coordinates to represent curves Cams play an important role in numerous mechanical systems: cam-follower pairs typically transform the rotary motion of the cam into a desirable motion of the follower. Figure 2.5 depicts a typical cam whose outer shape is deſned by a curve. It is convenient to deſne this curve using the polar coordinate system indicated on the ſgure: for each angle α, the distance from point O to point P is denoted r. The complete curve is then deſned by function r = r(α); angle α provides an arbitrary parameterization of the curve. If r(α) is a periodic function of angle α, the curve will be a closed curve, as expected for a cam.
2 Coordinate systems
g
e2
b
t ea
r a
1.6
er a
1.4
1.2
P e1
n
1/r
38
1
O
0.8
C
0.6
0.4 0
Fig. 2.5. Conſguration of a cam.
60
120
180
a
240
300
360
Fig. 2.6. Curvature distribution for the cam.
Vectors p0 , p1 , and p2 now become p0 = rCα e¯1 + rSα e¯2 ,
(2.27a)
p1 = (r Cα − rSα ) e¯1 + (r Sα + rCα ) e¯2 ,
(2.27b)
p2 = (r Cα − 2r Sα − rCα ) e¯1 + (r Sα + 2r Cα − rSα ) e¯2 ,
(2.27c)
where the notation (·) indicates a derivative with respect to α, Sα = sin α, and Cα = cos α. It then follows that p21 = r2 +r2 and p22 = (r −r)2 +4r2 . The various properties of the curve can then be evaluated; for instance, eqs. (2.15) and (2.17) yield the tangent vector and curvature along the curve, respectively. The curve depicted in ſg. 2.5 is deſned by the following equation, r(α) = 1.0 + 0.5 cos α + 0.15 cos 2α and ſg. 2.6 shows the curvature distribution as a function of angle α. Figure 2.5 shows the unit tangent vector, t¯, at point P of the curve and deſnes angles β = (¯ e1 , t¯) and γ = (¯ er , t¯); note that γ = β − α. The unit tangent vector can now be written as t¯ = Cβ e¯1 +Sβ e¯2 = p1 /p1 , where the second equality follows from eq. (2.15). Pre-multiplying this relationship by e¯T1 and e¯T2 yields p1 Cβ = r Cα −rSα and p1 Sβ = r Sα + rCα , respectively. Solving these two equations for r and r and using elementary trigonometric identities then leads to r = p1 sin(β − α) = p1 Sγ , r = p1 cos(β − α) = p1 Cγ ,
(2.28a) (2.28b)
where Sγ = sin γ, and Cγ = cos γ. The quotient of these two equations then yields the following relationship dr dα = tan γ . (2.29) r The derivative of the unit tangent vector with respect to the curvilinear coordinate along the curve is dt¯/ds = (−Sγ e¯1 + Cγ e¯2 )dβ/ds, and the curvature is then 1/ρ = |dβ/ds|. If the curve is convex, which is generally the case for cams, angle β is a monotonically increasing function of s, and hence, 1/ρ = dβ/ds. The chain rule
2.3 Path coordinates
39
for derivatives implies dβ = (1/ρ)(ds/dα)(dα/dr)dr and introducing eqs. (2.14), (2.28a), and (2.29) then yields dr dβ = . (2.30) ρCγ It is left to the reader to verify that eq. (2.30) yields an alternative, simpliſed expression for the curvature of the cam 1 2r2 − rr + r2 = . ρ p31
(2.31)
Finally, an increment in angle γ can be expressed as dγ = dβ − dα and introducing eqs. (2.30) and (2.29) yields 1 tan γ dγ = dr. (2.32) − ρCγ r
2.3 Path coordinates Consider a particle moving along a curve such that its position, s(t), is a given function of time. The velocity vector, v, of the particle is then v=
dp0 dt
=
dp0 ds ds dt
= v t¯,
(2.33)
where v = ds/dt is the speed of the particle, Clearly, the velocity vector of the particle is along the tangent to the curve. Next, the particle acceleration vector, a, becomes a=
dv ¯ v2 dv dt¯ ds = = v˙ t¯ + n ¯. t+v dt dt ds dt ρ
(2.34)
The acceleration vector is contained in the osculating plane, and can be written as a = at t¯ + an n ¯ , where at and an are the tangential and normal components of acceleration, respectively. The tangential component of acceleration, at = v, ˙ simply measures the change in particle speed. The normal component, an = v 2 /ρ, is always directed towards the center of curvature since v 2 /ρ is a positive number. This normal acceleration is clearly related to the curvature of the path; in fact, when the path is a straight line, 1/ρ = 0, and the normal acceleration vanishes. 2.3.1 Problems Problem 2.1. Prove identity
Prove that 1/ρ = p2 /p21 | sin α|, where p2 = p2 and α is the angle between vectors p1 and p2 .
40
2 Coordinate systems
Problem 2.2. Study of a curve Consider the following spatial curve: p0 = a(η + sin η)¯ı1 + a(1 + cos η)¯ı2 + a(1 − cos η)¯ı3 , where a > 0 is a given parameter. (1) Find the tangent, normal, and binormal vectors for this curve. (2) Determine the curvature, radius of curvature, and twist of the curve. Is this a planar curve? Is the tangent vector deſned at all points of the curve?
Problem 2.3. Study of a curve Consider the following spatial curve: p0 = ρ(cos αη)(cos η)¯ı1 + ρ(cos αη)(sin η)¯ı2 + ρ(sin αη)¯ı3 , where ρ > 0 and α are given parameters. (1) Find the tangent, normal, and binormal vectors for this curve. (2) Determine the curvature, radius of curvature, and twist of the curve.
Problem 2.4. Short questions (1) A particle of mass m is sliding along a planar curve. Find the component of the particle’s acceleration vector along the binormal vector of Frenet’s triad. (2) A particle of mass m is sliding along a three-dimensional curve. Find the component of the particle’s acceleration vector along the binormal vector of Frenet’s triad. (3) State the criterion used to ascertain whether a curve is planar or three-dimensional.
Problem 2.5. Study of a curve deſned in polar coordinates The outer surface of a cam is speciſed by the following curve deſned in polar coordinates, r(α) = 1.0 − 0.5 cos α + 0.18 cos 2α. (1) Plot the curve. (2) Plot the curvature distribution for α ∈ [0, 2π].
2.4 Differential geometry of a surface This section investigates the differential geometry of surfaces, leading to the concept of surface coordinates. The differential geometry of surfaces is more complex than that of curves. The ſrst and second metric tensors of surfaces are introduced ſrst, and the analysis of the curvature of surfaces leads to the concept of lines of curvatures and associated principal radii of curvature. Finally, the base vectors and their derivatives are evaluated, leading to Gauss’ and Weingarten’s formulæ. 2.4.1 The ſrst metric tensor of a surface Figure 2.7 depicts a surface, denoted S, in three-dimensional space. A surface is the locus of the points generated by two parameters, η1 and η2 , such that the position vector, p0 , of such points can be written as p0 = p0 (η1 , η2 ).
(2.35)
If η2 is kept constant, η2 = c2 , p0 = p0 (η1 , c2 ) deſnes a curve embedded into the surface; such curve is called an “η1 curve.” Figure 2.7 shows a grid of such curves for various values of c2 . Similarly, “η2 curves” can be deſned, corresponding to p0 = p0 (c1 , η2 ); a grid of η2 curves obtained for different constant c1 is also shown on the ſgure. In general, parameters η1 and η2 do not measure length along these
2.4 Differential geometry of a surface
41
embedded curves, and hence, they do not deſne intrinsic parameterizations of the curves. The surface base vectors are deſned as follows a1 =
∂p0 ∂η1
,
a2 =
∂p0 ∂η2
,
(2.36)
and are shown in ſg. 2.7. Clearly, vectors a1 and a2 are tangent to the η1 and η2 curves that intersect at point P, respectively. Consequently, they lie in the plane tann a2 h2 gent to the surface at this point. Since η1 Tangent and η2 do not form an intrinsic parameterplane P S ization, vectors a1 and a2 are not unit tana1 gent vectors. Furthermore, these two veci 3 tors are not, in general, orthogonal to each p0(h1, h2) other. h1 I The ſrst metric tensor of the surface, A, i2 is deſned as i1 T a11 a12 a1 a1 aT1 a2 A= T = , (2.37) Fig. 2.7. The base vectors of a surface. a2 a1 aT2 a2 a12 a22 and its determinant is denoted a = det(A). A differential element of length on the surface is found as " ! ds2 = dpT0 dp0 = aT1 dη1 + aT2 dη2 (a1 dη1 + a2 dη2 ) = dη T A dη. (2.38)
where dη T = dη1 , dη2 . Clearly, the ſrst metric tensor is closely related to length measurements on the surface. Because the base vectors deſne the plane tangent to the surface, the unit vector, n ¯ , normal to the surface is readily found as n ¯=
a1 a2 a1 a = √ 2. a1 a2 a
The area of a differential element of the surface then becomes √ da = a1 a2 dη1 dη2 = a1 a2 dη1 dη2 = a dη1 dη2 .
(2.39)
(2.40)
2.4.2 Curve on a surface Figure 2.8 depicts a curve, C, entirely contained within surface S. Let the curve be deſned by its intrinsic parameter, s, the curvilinear variable along curve C. The tangent vector, t¯, to curve C is deſned by eq. (2.5). This unit tangent vector clearly lies in the plane tangent to S, and hence, it can be resolved along the base vectors, t¯ = λ1 a1 + λ2 a2 . Because t¯ is a unit vector, it follows that
42
2 Coordinate systems
t¯T t¯ = λT A λ = 1,
(2.41)
where λT = λ1 , λ2 . On the other hand, eq. (2.38) can be recast as dη T dη A = 1. ds ds a2 h2
(2.42)
Because eqs. (2.41) and (2.42) must be identical for all curves on the surface,
P i3 I
S p0(h1, h2)
a1 C h1
i2
i1 Fig. 2.8. A curve, C, entirely contained within surface, S
λ=
dη . ds
(2.43)
This result is expected since ds is an increment of length along C, and t¯ is tangent to C. Angles θ1 = (t¯, a1 ) and θ2 = (t¯, a2 ) can be obtained by expanding the dot products t¯T a1 and t¯T a2 , respectively, to ſnd √ a cos θ1 √ 11 = A λ. (2.44) a22 cos θ2
2.4.3 The second metric tensor of a surface Consider once again a curve, C, entirely contained within surface S, as depicted in ſg. 2.8. The unit tangent vector clearly lies in the plane tangent to the surface, but the curvature vector dt¯/ds will have components in and out of this tangent plane, dt¯ = κn n ¯ + κg ρ¯, ds
(2.45)
where κn is the normal curvature, κg the geodesic curvature, and ρ¯ a unit vector belonging to the plane tangent to S. The normal curvature can be evaluated as κn = n ¯T
n dpT d¯ dt¯ d¯ n = −t¯T =− 02 , ds ds ds
(2.46)
where the normality condition, t¯T n ¯ = 0, was used. The numerator can be written as " ∂n ! T ¯ ∂n ¯ T T n = − a1 dη1 + a2 dη2 dη1 + dη2 −dp0 d¯ ∂η1 ∂η2 ¯ 2 ¯ 2 ¯ ¯ T ∂n T ∂n T ∂n T ∂n dη1 dη2 , dη + a2 dη + a1 + a2 = − a1 ∂η1 1 ∂η2 2 ∂η2 ∂η1 ∂a ∂a ∂a ∂a ¯ T 2 dη22 + n ¯T 1 + n ¯ T 2 dη1 dη2 , = n ¯ T 1 dη12 + n ∂η1 ∂η2 ∂η2 ∂η1 where the orthogonality conditions, n ¯ T a1 = 0 and n ¯ T a2 = 0, were used to obtain the last equality.
2.4 Differential geometry of a surface
The second metric tensor of the surface is deſned as ⎤ ⎡ ⎤ ⎡ ∂ 2 p0 ∂ 2 p0 T T T ∂a1 T ∂a1 n ¯ n ¯ n ¯ n ¯ b11 b12 ⎢ ∂η1 ⎥ ⎢ ∂η12 ∂η1 ∂η2 ⎥ ∂η 2 ⎥ ⎢ B = ⎣ ∂a ⎦=⎣ 2 2 ⎦ = b12 b22 , ∂ p ∂ p 2 T T ∂a2 0 0 n ¯ n ¯ n ¯T n ¯T ∂η1 ∂η2 ∂η1 ∂η2 ∂η22
43
(2.47)
and its determinant is denoted b = det(B). The second equality shows that the second metric tensor is a symmetric tensor. It follows that −dpT0 d¯ n = dη T Bdη, and the normal curvature, eq. (2.46), becomes κn =
dη T Bdη dη T dη B = λT B λ. = ds2 ds ds
(2.48)
2.4.4 Analysis of curvatures Figure 2.9 shows a plane, P, containing the normal, P n ¯ , to surface S. Let curve Cn be at the intersection n a2 h2 of plane P and surface S. Because curve Cn is a planar curve, its curvature vector is in plane P. P Next, let plane P rotate about n ¯ . For each new a1 Cn orientation of the plane, a new curve, Cn , is generS i3 ated with its own normal curvature κn . The followp0(h1, h2) h1 ing problem will be investigated: what is the orienI tation of plane P that maximizes the normal curi2 vature κn ? In mathematical terms, the maximum i1 value of κn = λT B λ is sought, under the normalFig. 2.9. Intersection of surface, ity constraint, λT A λ = 1. This constrained maximization problem will be S, with plane, P, that contains the solved with the help of Lagrange’s multiplier tech- normal to the surface. nique max λT B λ − μ(λT A λ − 1) , λ,μ
where μ is the Lagrange multiplier used to enforce the constraint. The solution of this problem implies (B − μA)λ = 0, and the normality condition λT A λ = 1. Pre-multiplying this equation by λT yields the physical interpretation of the Lagrange multiplier: λT B λ − μ λT A λ = 0 or, in view of the normality constraint, μ = λT B λ = κn , Hence, Lagrange’s multiplier can be interpreted as the normal curvature itself. The condition for maximum normal curvature can now be written as (B − κn A)λ = 0. This set of homogeneous algebraic equations admits the trivial solution λ = 0, but this solution violates the normality constraint. Non-trivial solutions correspond to the eigenpairs of the generalized eigenproblem B λ = κn A λ. Because A and B are symmetric and A is positive-deſnite, the eigenvalues are always real, and mutually orthogonal eigenvectors can be constructed.
44
or
2 Coordinate systems
The eigenvalues are the solution of the quadratic equation det(B − κn A) = 0,
b = 0, (2.49) a where κm = (a11 b22 + a22 b11 − 2a12 b12 )/2a. The solutions of this quadratic equation are called the principal curvatures κIn , κII κ2m − b/a. (2.50) n = κm ± κ2n − 2κm κn +
The mean curvature is deſned as κm =
a11 b22 + a22 b11 − 2a12 b12 κIn + κII n = , 2 2a
(2.51)
and the Gaussian curvature as
b . (2.52) a When b/a > 0, the principal curvatures have the same sign, corresponding to a convex shape; when b/a < 0, the principal curvatures are of opposite sign, corresponding to a saddle shape; ſnally, when b/a = 0, one of the principal curvatures is zero, the surface S has zero curvature in one of the principal curvature directions. κIn κII n =
2.4.5 Lines of curvature A line of curvature of a surface is deſned as a curve whose tangent vector always points along the principal curvature directions of the surface. Consider now a set of coordinates, η1 and η2 , such that a12 = b12 = 0. It follows that a = a11 a22 , b = b11 b22 and κm = (b11 /a11 + b22 /a22 )/2. The principal curvatures then simply become b11 b22 , κII . (2.53) κIn = n = a11 a22 On the other hand, in view of eq. (2.41),η1 or η2 curves are characterized by √ √ λT = 1/ a11 , 0 or λT = 0, 1/ a22 , respectively. Their normal curvature then follows from eq. (2.48) as κn = b11 /a11 and κn = b22 /a22 , respectively. It is now clear that when a12 = b12 = 0, the η1 and η2 curves are indeed the lines of curvatures. It is customary to introduce the principal radii of curvature, R1 and R2 , deſned as b11 1 b22 1 = , κII = . (2.54) κIn = n = a11 R1 a22 R2 2.4.6 Derivatives of the base vectors At this point, the discussion will focus exclusively on surface parameterizations deſning lines of curvatures. In this case, vectors a1 , a2 and n ¯ form a set of mutually orthogonal vectors, although the ſrst two are not necessarily unit vectors. An orthonormal triad can be constructed as follows
2.4 Differential geometry of a surface
e¯1 =
a1 , a1
e¯2 =
a2 , a2
e¯3 = n ¯.
45
(2.55)
To interpret the meaning of these unit vectors, the chain rule for derivatives is used to write ∂p ∂p ds1 ds1 a1 = 0 = 0 = e¯1 , ∂η1 ∂s1 dη1 dη1 where s1 is the arc length measured along the η1 curve. Because ∂p0 /∂s1 = e¯1 is the unit tangent vector to the η1 curve, see eq. (2.5), it follows that a1 = h1 =
ds1 , dη1
a2 = h2 =
ds2 . dη2
(2.56)
Notation h1 = a1 was introduced to simplify the writing. Clearly, h1 is a scale factor, the ratio of the inſnitesimal increment in length, ds1 , to the inſnitesimal increment in parameter η1 , dη1 , along the curve. It is interesting to compute the derivatives of the base vectors. To that effect, the following expression is considered ∂ 2 p0 ∂η1 ∂η2
=
∂a1 ∂a2 ∂(h1 e¯1 ) ∂(h2 e¯2 ) = = = . ∂η2 ∂η1 ∂η2 ∂η1
Expanding the derivatives leads to ∂¯ e1 ∂¯ e2 ∂h1 ∂h2 e¯1 + h1 = e¯2 + h2 . ∂η2 ∂η2 ∂η1 ∂η1
(2.57)
Pre-multiplying this relationship by e¯T1 yields the following identity e¯T1
∂¯ e2 1 ∂h1 = . ∂η1 h2 ∂η2
To obtain this result, the orthogonality of the base vectors, e¯T1 e¯2 = 0, was used; furthermore, e¯T1 ∂¯ e1 /∂η2 = 0, since e¯1 is a unit vector. In terms of intrinsic parameterization, this expression becomes e¯T1
∂¯ e2 ∂¯ e1 1 ∂h1 1 = −¯ eT2 = = , ∂s1 ∂s1 h1 ∂s2 T1
(2.58)
where T1 is the ſrst radius of twist of the surface. Next, eq. (2.57) is pre-multiplied e¯T2 to yield e¯T2
∂¯ e1 ∂¯ e2 1 ∂h2 1 = −¯ eT1 = = , ∂s2 ∂s2 h2 ∂s1 T2
(2.59)
where T2 is the second radius of twist of the surface. Since the parameterization deſnes lines of curvatures, b12 = 0, and eq. (2.47) then implies e¯T2
∂n ¯ ∂¯ e2 =n ¯T = 0, ∂s1 ∂s1
e¯T1
∂n ¯ ∂¯ e1 =n ¯T = 0. ∂s2 ∂s2
46
2 Coordinate systems
The deſnitions of the diagonal terms, b11 and b22 , of the second metric tensor, eq. (2.47), lead to e¯T1
∂n ¯ ∂¯ e1 1 = −¯ nT =− , ∂s1 ∂s1 R1
e¯T2
∂n ¯ ∂¯ e2 1 = −¯ nT =− , ∂s2 ∂s2 R2
where the principal radii of curvature, R1 and R2 , were deſned in eq. (2.54). The derivatives of the surface base vector e¯1 can be resolved in the following manner ∂¯ e1 = c1 e1 + c2 e2 + c3 n ¯, (2.60) ∂s1 where the unknown coefſcients c1 , c2 , and c3 are readily found by pre-multiplying the above relationship by e¯T1 , e¯T2 , and n ¯ T to ſnd ∂¯ e1 1 1 = − e¯2 + n ¯. ∂s1 T1 R1
(2.61)
A similar development leads to 1 ∂¯ e1 = e¯2 . ∂s2 T2
(2.62)
The derivatives of the surface base vector e¯2 are found in a similar manner ∂¯ e2 1 = e¯1 , ∂s1 T1
∂¯ e2 1 1 = − e1 + n ¯. ∂s2 T2 R2
(2.63)
These results are known as Gauss’ formulæ. Proceeding in a similar fashion, the derivatives of the normal vector are resolved in the following manner 1 ∂n ¯ = − e¯1 , ∂s1 R1
∂n ¯ 1 = − e¯2 . ∂s2 R2
(2.64)
These results are known as Weingarten’s formulæ. Gauss’ and Weingarten’s formulæ can be combined to yield the derivatives of the base vectors in a compact manner as ⎧ ⎫ ⎡ ⎤⎧ ⎫ e¯ 0 −1/T1 1/R1 ⎨e¯1 ⎬ ∂ ⎨ 1⎬ ⎣ e¯2 = 1/T1 0 0 ⎦ e¯2 , (2.65a) ⎩ ⎭ ∂s1 ⎩ ⎭ −1/R1 0 n ¯ 0 n ¯ ⎧ ⎫ ⎡ ⎤⎧ ⎫ e¯ 0 0 1/T2 ⎨e¯1 ⎬ ∂ ⎨ 1⎬ ⎣ e¯2 = −1/T2 0 1/R2 ⎦ e¯2 . (2.65b) ⎩ ⎭ ∂s2 ⎩ ⎭ n ¯ 0 −1/R2 0 n ¯ These equations should be compared to the derivatives of Frenet’s triad, eq. (2.13).
2.4 Differential geometry of a surface
47
Example 2.4. The spherical surface The spherical surface in three-dimensional space depicted in ſg. 2.10 is deſned by following position vector p0 = R (sin η1 cos η2 ¯ı1 + sin η1 sin η2 ¯ı2 + cos η1 ¯ı3 ), where R is the radius of the sphere. The surface base vectors are readily evaluated as a1 = ∂p0 /∂η1 = R (cos η1 cos η2 ¯ı1 + cos η1 sin η2 ¯ı2 − sin η1 ¯ı3 ), and a2 = ∂p0 /∂η2 = R (− sin η1 sin η2 ¯ı1 + sin η1 cos η2 ¯ı2 ). The ſrst metric tensor of the sphere now becomes 2 0 R A= . 0 R2 sin2 η1 √ Clearly, h1 = R, h2 = R sin η1 , and a = R2 sin η1 . The normal vector is then evaluated with the help of eq. (2.39), to ſnd n ¯=
a1 a2 = sin η1 cos η2¯ı1 + sin η1 sin η2¯ı2 + cos η1¯ı3 . a1 a2
h1
i3
i3
n
P i2
i1
i2 i1
h2
Fig. 2.10. Spherical surface conſguration.
r f
Fig. 2.11. Parabolic surface of revolution.
The second metric tensor of the spherical surface now follows from eq. (2.47) −R 0 . B= 0 −R sin2 η1 Note that since a12 = 0 and b12 = 0, the coordinates used here are lines of curvature for the spherical surface. The orthonormal triad to the surface is e¯1 = cos η1 cos η2 ¯ı1 + cos η1 sin η2 ¯ı2 − sin η1¯ı3 , e¯2 = − sin η2 ¯ı1 + cos η2 ¯ı2 , n ¯ = sin η1 cos η2 ¯ı1 + sin η1 sin η2 ¯ı2 + cos η1 ¯ı3 . These expressions are readily inverted to ſnd ¯, ¯ı1 = cos η1 cos η2 e¯1 − sin η2 e¯2 + sin η1 cos η2 n ¯, ¯ı2 = cos η1 sin η2 e¯1 + cos η2 e¯2 + sin η1 sin η2 n ¯. ¯ı3 = − sin η1 e¯1 + cos η1 n
48
2 Coordinate systems
The mean curvature, eq. (2.51), and Gaussian curvature, eq. (2.52), are R 1 1 R sin2 η1 R2 sin2 η1 1 − 2− 2 2 = − , κIn κII κm = = 2. n = 2 4 2 R R R R sin η1 R sin η1 Finally, the principal curvatures, eq. (2.53), become 1 1 , κII n =− . R R As expected, the principal radii of curvature R1 = R2 = −R are equal to the radius of sphere. The twists of the surface now follow from eqs. (2.58) and (2.59) κIn = −
1 1 ∂h1 = = 0, T1 h1 h2 ∂η2
1 1 ∂h2 cos η1 = = . T2 h1 h2 ∂η1 R sin η1
(2.66)
2.4.7 Problems Problem 2.6. The parabola of revolution Figure 2.11 depicts a parabolic surface of revolution. It is deſned by the following position vector p0 = r cos φ ¯ı1 + r sin φ ¯ı2 + ar 2¯ı3 , where r ≥ 0 and 0 ≤ φ ≤ 2π. The following notation was used η1 = r and η2 = φ. (1) Find the ſrst and second metric tensors of the ¯ . (3) Find the mean curvature, the Gaussian surface. (2) Find the orthonormal triad e¯1 , e¯2 , and n curvature, and the principal radii of curvature of the surface. (4) Find the twists of the surface.
Problem 2.7. Jacobian of the transformation Consider two parameterizations of a surface deſned by coordinates (η1 , η2 ) and (ˆ η1 , ηˆ2 ). Show that the base vectors in the two parameterizations are related as follows a ˆ1 = J11 a1 + J12 a2 and a ˆ2 = J21 a1 + J22 a2 , where J is the Jacobian of the coordinate transformation ⎤ ⎡ ∂η1 ∂η2 J11 J12 ⎢ ηˆ1 ∂ ηˆ1 ⎥ J= = ⎣∂ ∂η1 ∂η2 ⎦ . J21 J22 ∂ ηˆ2 ∂ ηˆ2 ˆ and If A and B are the ſrst and second metric tensors in coordinate system (η1 , η2 ) and A T ˆ the corresponding quantities in coordinate system (ˆ ˆ = J A J and B η1 , ηˆ2 ), show that A T ˆ B =JBJ .
Problem 2.8. Finding the line of curvature system Using the notations deſned in problem 2.7, let (η1 , η2 ) be a known coordinate system and (ˆ η1 , ηˆ2 ) the unknown line of curvature system. Find the Jacobian of the coordinate transforη1 , ηˆ2 ). Show that the mation that will bring (η1 , η2 ) to the desired line of curvature system (ˆ principal radii of curvature are 1 b11 + γ(2b12 + γb22 ) = , R1 a11 + γ(2a12 + γa22 ) Hint: write the Jacobian as
b11 + α(2b12 + αb22 ) 1 = . R2 a11 + α(2a12 + αa22 )
J=
1 γ , α1
and compute the coefſcients α and γ so as to enforce a ˆ12 = ˆb12 = 0. The solution of the problem is α = Cα /[Δ/(1+αγ)] and γ = −Cγ /[Δ/(1+αγ)] where Cα= a22 b12 −b22 a12 , Cγ = a11 b12 −b11 a12 , Δ = a11 b22 −b11 a22 , and Δ/(1+αγ) = Δ/2± (Δ/2)2 + Cα Cγ .
2.6 Differential geometry of a three-dimensional mapping
49
2.5 Surface coordinates A particle is moving on a surface and its position is given by the lines of curvature coordinates, η1 (t) and η2 (t). The velocity vector is computed with the help of the chain rule for derivatives v=
dp0 dt
=
∂p0 ∂η1
η˙ 1 +
∂p0 ∂η2
η˙2 = s˙ 1 e¯1 + s˙ 2 e¯2 .
(2.67)
Note the close similarity between this expression and that obtained for path coordinates, eq. (2.33). The velocity vector is in the plane tangent to the surface, and the speed of the particle is v = s˙ 21 + s˙ 22 . Next, the acceleration vector is computed as a = s¨1 e¯1 + s˙ 1 e¯˙ 1 + s¨2 e¯2 + s˙ 2 e¯˙ 2 ∂¯ e1 ∂¯ e2 ∂¯ e1 ∂¯ e2 = s¨1 e¯1 + s¨2 e¯2 + s˙ 1 s˙ 1 + s˙ 2 + s˙ 2 s˙ 1 + s˙ 2 . ∂s1 ∂s2 ∂s1 ∂s2 Introducing Gauss’ formulae, eq. (2.61) to (2.63), then yields 2 s˙ 1 s˙ 2 s˙ 22 s˙ 1 s˙ 2 s˙ 21 s˙ 1 s˙ 22 e¯1 + s¨2 + e¯2 + n ¯ . (2.68) − − + a = s¨1 + T1 T2 T2 T1 R1 R2 Note here again the similarity between this expression and that obtained for path coordinates, eq. (2.34). The acceleration component along the normal to the surface is related to the principal radii of curvatures, R1 and R2 . For a curve, the radius of curvature is always positive, see eq. (2.7), whereas for a surface, the radii of curvatures could be positive or negative, see eq. (2.54). Hence, the normal component of acceleration is not necessarily oriented along the normal to the surface. The components of acceleration in the plane tangent to the surface are related to the second time derivative of the intrinsic parameters, as expected. Additional terms, however, associated with the surface radii of twist also appear. Clearly, the acceleration of a particle moving on the surface is affected by the surface radii of curvature and twist; the particle “feels” the curvatures and twists of the surface as it moves.
2.6 Differential geometry of a three-dimensional mapping This section investigates the differential geometry of mappings of the threedimensional space onto itself. The differential geometry of such mappings is more complex than that of curves or surfaces. For simplicity, the analysis focuses on orthogonal mappings, leading to the deſnition of the curvatures of the coordinate system and orthogonal curvilinear coordinates. Two orthogonal curvilinear coordinate systems of great practical importance, the cylindrical and spherical coordinate systems are reviewed.
50
2 Coordinate systems
2.6.1 Arbitrary parameterization Consider the following mapping of the three-dimensional space onto itself in terms of three parameters, η1 , η2 , and η3 , p0 (η1 , η2 , η3 ) = x1 (η1 , η2 , η3 )¯ı1 + x2 (η1 , η2 , η3 )¯ı2 + x3 (η1 , η2 , η3 )¯ı3 .
(2.69)
This relationship deſnes a mapping between the parameters and the Cartesian coordinates x1 = x1 (η1 , η2 , η3 ),
x2 = x2 (η1 , η2 , η3 ),
x3 = x3 (η1 , η2 , η3 ).
(2.70)
Let η2 and η3 be constants whereas η1 only is allowed to vary: a general curve in three-dimensional space is generated. The analysis of section 2.2 would readily apply to this curve, called an “η1 curve.” Similarly, η2 and η3 curves could be deſned. Next, let η1 be a constant, whereas η2 and η3 are allowed to vary: a general surface in three-dimensional space is generated. The analysis of section 2.4 would readily apply to this surface, called an “η1 surface.” Here again, η2 and η3 surfaces could be similarly deſned. A point in space with parameters (η1 , η2 , η3 ) is at the intersection of three η1 , η2 , and η3 curves, or at the intersection of three η1 , η2 , and η3 surfaces. Furthermore, an η1 curve forms the intersection of η2 and η3 surfaces. The inverse mapping deſnes the parameters as functions of the Cartesian coordinates η1 = η1 (x1 , x2 , x3 ),
η2 = η2 (x1 , x2 , x3 ),
η3 = η3 (x1 , x2 , x3 ).
(2.71)
It is assumed here that eqs. (2.70) and (2.71) deſne a one to one mapping, which implies that the Jacobian of the transformation, ⎤ ⎡ ∂x1 ∂x1 ∂x1 ⎢ ∂η1 ∂η2 ∂η3 ⎥ ⎢ ∂x ∂x ∂x ⎥ ⎢ 2 2 2⎥ J =⎢ (2.72) ⎥, ⎢ ∂η1 ∂η2 ∂η3 ⎥ ⎣ ∂x3 ∂x3 ∂x3 ⎦ ∂η1 ∂η2 ∂η3 has a non vanishing determinant at all points in space. Next, the base vectors associated with the parameters are deſned as g1 =
∂p0 ∂η1
,
g2 =
∂p0 ∂η2
,
g3 =
∂p0 ∂η3
.
(2.73)
For an arbitrary parameterization, the base vectors will not be unit vectors, nor will they be mutually orthogonal. Consider the example of the cylindrical coordinate system deſned by the following parameterization
2.6 Differential geometry of a three-dimensional mapping
51
x1 = r cos θ, x2 = r sin θ, x3 = z, where r ≥ 0 and 0 ≤ θ < 2π. The following notation was used: η1 = r, η2 = θ and η3 = z. The inverse mapping is readily found as x2 r = x21 + x22 , θ = tan−1 , z = x3 . x1 Figure 2.12 depicts this mapping; clearly, the familiar polar coordinates are used in the (¯ı1 , ¯ı2 ) plane and z is the distance point P is above this plane. The Jacobian of the transformation becomes ⎤ ⎡ cos θ −r sin θ 0 J = ⎣ sin θ r cos θ 0⎦ . 0 0 1
g3 i3
g2 P r
I i1
z r
q
g1 i2
Note that det J = r, and hence, vanishes at r = 0. Fig. 2.12. The cylindrical coorIndeed, cylindrical coordinates are not deſned at the dinate system. origin since when r = 0, any angle θ maps to the same point, the origin. The base vectors of this coordinate system are g 1 = cos θ ¯ı1 + sin θ ¯ı2 , g 2 = −r sin θ ¯ı1 + r cos θ ¯ı2 , and g 3 = ¯ı3 . Note that g 1 is a unit vector, since g1 = 1, but g 2 is not, g 2 = r. Also note that for cylindrical coordinates, g T2 g 3 = g T1 g 3 = g T1 g2 = 0, the base vectors are mutually orthogonal, as shown in ſg. 2.12. 2.6.2 Orthogonal parameterization When the base vectors associated with the parameterization are mutually orthogonal, the parameters deſne an orthogonal parameterization of the three-dimensional space. The rest of this section will be restricted to such parameterization. In this case, it is advantageous to deſne a set of orthonormal vectors e¯1 =
1 g , g1 1
e¯2 =
1 g , g2 2
e¯3 =
1 g . g3 3
(2.74)
To interpret the meaning of these unit vectors, the chain rule for derivatives is used to write ∂p ∂p ds1 ds1 g1 = 0 = 0 = e¯1 , (2.75) ∂η1 ∂s1 dη1 dη1 where s1 is the arc length measured along the η1 curve. Because ∂p0 /∂s1 = e¯1 is the unit tangent to the η1 curve, see eq. (2.5), it follows that g1 = h1 =
ds1 , dη1
g 2 = h2 =
ds2 , dη2
g 3 = h3 =
ds3 . dη3
(2.76)
Notation h1 = g1 is introduced to simplify the notation. Clearly, h1 is a scale factor, the ratio of the inſnitesimal increment in length, ds1 , to the inſnitesimal increment in parameter η1 , dη1 , along the curve.
52
2 Coordinate systems
2.6.3 Derivatives of the base vectors Here again, the derivatives of the base vectors will be evaluated. To that effect, the following expression is considered ∂ 2 p0 ∂η1 η2
=
∂g 1 ∂η2
=
∂g 2 ∂η1
=
∂(h1 e¯1 ) ∂(h2 e¯2 ) = . ∂η2 ∂η1
(2.77)
Expanding the derivatives leads to ∂h1 ∂¯ e1 ∂¯ e2 ∂h2 e¯1 + h1 = e¯2 + h2 . ∂η2 ∂η2 ∂η1 ∂η1
(2.78)
Pre-multiplying this relationship by e¯T1 yields the following identity e¯T1
∂¯ e2 1 ∂h1 = . ∂η1 h2 ∂η2
(2.79)
To obtain this result, the orthogonality of the base vectors, e¯T1 e¯2 = 0, was used; furthermore, e¯T1 ∂¯ e1 /∂η2 = 0, since e¯1 is a unit vector. Next, eq. (2.78) is pre-multiplied e¯T2 to yield ∂¯ e1 ∂¯ e2 1 ∂h2 e¯T2 = −¯ eT1 = . (2.80) ∂η2 ∂η2 h1 ∂η1 Finally, pre-multiplication by e¯T3 leads to h1 e¯T3
∂¯ e1 ∂¯ e2 = h2 e¯T3 . ∂η2 ∂η1
(2.81)
e2 /∂η1 = −¯ eT2 ∂¯ e3 /∂η1 , this result can be manipulated as follows Since e¯T3 ∂¯ h1 e¯T3
∂¯ e1 ∂¯ e3 e1 h1 h2 T ∂¯ = −h2 e¯T2 =− e¯ , ∂η2 ∂η1 h3 2 ∂η3
(2.82)
where identity (2.81) was used with a permutation of the indices. Using the same identities once again leads to h1 e¯T3
∂¯ e1 e2 ∂¯ e3 ∂¯ e1 h1 h2 T ∂¯ = e¯1 = h1 e¯T1 = −h1 e¯T3 . ∂η2 h3 ∂η3 ∂η2 ∂η2
This result clearly implies ∂¯ e1 = 0. ∂η2 The derivatives of the base vector can be resolved as e¯T3
(2.83)
∂¯ e1 = c1 e¯1 + c2 e¯2 + c3 e¯3 , ∂η1 where the unknown coefſcients c1 , c2 , and c3 are found by pre-multiplying this expression by e¯1 , e¯2 , and e¯3 , respectively, and using identities (2.79), (2.80) and (2.83) to ſnd
2.7 Orthogonal curvilinear coordinates
53
∂¯ e1 1 ∂h1 1 ∂h1 =− e¯2 − e¯3 . ∂η1 h2 ∂η2 h3 ∂η3 Proceeding in a similar manner, the derivatives of base vector e¯1 with respect to η2 and η3 are found as ∂¯ e1 1 ∂h2 = e¯2 , ∂η2 h1 ∂η1
∂¯ e1 1 ∂h3 = e¯3 . ∂η3 h1 ∂η1
Similar expression are readily found for the derivatives of the unit base vectors e¯2 and e¯3 through index permutations and are summarized as ⎧ ⎫ ⎡ ⎤⎧ ⎫ e¯1 ⎬ 0 1/R13 −1/R12 ⎨e¯1 ⎬ ⎨ ∂ e¯2 = ⎣−1/R13 0 0 ⎦ e¯2 , (2.84a) ⎩ ⎭ ∂s1 ⎩ ⎭ 1/R12 e¯3 0 0 e¯3 ⎧ ⎫ ⎡ ⎤⎧ ⎫ e¯1 ⎬ 0 1/R23 0 ⎨ ⎨e¯1 ⎬ ∂ e¯2 = ⎣−1/R23 0 1/R21 ⎦ e¯2 , (2.84b) ⎩ ⎭ ∂s2 ⎩ ⎭ e¯3 0 −1/R21 0 e¯3 ⎧ ⎫ ⎡ ⎤⎧ ⎫ e¯1 ⎬ 0 0 −1/R32 ⎨e¯1 ⎬ ⎨ ∂ e¯2 = ⎣ 0 0 1/R31 ⎦ e¯2 , (2.84c) ⎩ ⎭ ∂s3 ⎩ ⎭ e¯3 1/R32 −1/R31 e¯3 where the curvatures of the system were deſned as 1 ∂h1 1 = , R12 h1 ∂s3 1 1 ∂h2 =− , R21 h2 ∂s3 1 1 ∂h3 = , R31 h3 ∂s2
1 1 ∂h1 =− , R13 h1 ∂s2 1 1 ∂h2 = , R23 h2 ∂s1 1 1 ∂h3 =− . R32 h3 ∂s1
(2.85a) (2.85b) (2.85c)
2.7 Orthogonal curvilinear coordinates Consider a particle moving in three-dimension space. The position of this particle can be deſned by eq. (2.69) in terms of an orthogonal parameterization of space. These parameter deſne a set of orthogonal curvilinear coordinates for the particle. The velocity vector is computed with the help of the chain rule for derivatives v=
dp0 dt
=
∂p0 ∂s1
s˙ 1 +
∂p0 ∂s2
s˙ 2 +
∂p0 ∂s3
s˙ 3 = s˙ 1 e¯1 + s˙ 2 e¯2 + s˙ 3 e¯3 .
(2.86)
The expression for the acceleration vector will involve term in s¨1 e¯1 and s˙ 1 e¯˙ 1 , and similar terms for the other two indices. The latter term is further expanded using the chain rule for derivatives, and expressing the derivatives of the base vectors using eqs. (2.84) then yields
54
2 Coordinate systems
a=
s¨1 − s˙ 22 /R23 + s˙ 23 /R32 − s˙ 1 s˙ 2 /R13 + s˙ 1 s˙ 3 /R12 e¯1 + s¨2 + s˙ 21 /R13 − s˙ 23 /R31 + s˙ 1 s˙ 2 /R23 − s˙ 2 s˙ 3 /R21 e¯2 + s¨3 − s˙ 21 /R12 + s˙ 22 /R21 − s˙ 1 s˙ 3 /R32 + s˙ 2 s˙ 3 /R31 e¯3 .
(2.87)
Note here again the similarity between this expression and that obtained for path or surface coordinates, eqs. (2.34) or (2.68), respectively. The acceleration components in each direction involve the second time derivative of the intrinsic parameters, as expected. Additional terms, however, associated with the radii of curvature of the curvilinear coordinate system also appear. 2.7.1 Cylindrical coordinates The cylindrical coordinate system, depicted in ſg. 2.13, is an orthogonal curvilinear coordinate system deſned as follows (2.88)
p0 = r cos θ ¯ı1 + r sin θ ¯ı2 + z ¯ı3 ,
where r ≥ 0 and 0 ≤ θ < 2π. The following notation was used: η1 = r, η2 = θ, and η3 = z. Note that if z = 0, the cylindrical coordinate system reduces to coordinates r and θ in plane (¯ı1 , ¯ı2 ) and are then often called polar coordinates. f e1
i3
i3 e3 e2
i1
e3 i2
e1
p0 r
r p0
z
q
i2
q
e2
i1
Fig. 2.13. The cylindrical coordinate system.
Fig. 2.14. The spherical coordinate system.
The following summarizes important formulæ in cylindrical coordinates. The scale factors are h1 = 1, h2 = r, and h3 = 1. The curvatures of the cylindrical coordinate system all vanish, except that R23 = r. The base vectors expressed in terms of the Cartesian system are e¯1 =
cos θ ¯ı1 + sin θ ¯ı2 ,
e¯2 = − sin θ ¯ı1 + cos θ ¯ı2 , ¯ı3 . e¯3 =
(2.89a) (2.89b) (2.89c)
The time derivatives of the based vectors resolved along this triad are θ˙ e¯2 , e¯˙ 2 = −θ˙ e¯1 , e¯˙ 3 = 0.
e¯˙ 1 =
(2.90a) (2.90b) (2.90c)
2.7 Orthogonal curvilinear coordinates
55
Finally, the position, velocity, and acceleration vectors, resolved along the base vectors of the cylindrical coordinate system are p0 = r e¯1 + z e¯3 , v = r˙ e¯1 + rθ˙ e¯2 + z˙ e¯3 , ˙ e¯2 + z¨ e¯3 . a = (¨ r − rθ˙2 ) e¯1 + (rθ¨ + 2r˙ θ)
(2.91a) (2.91b) (2.91c)
respectively. 2.7.2 Spherical coordinates The spherical coordinate system, depicted in ſg. 2.14, is an orthogonal curvilinear coordinate system deſned as follows p0 = r sin φ cos θ ¯ı1 + r sin φ sin θ ¯ı2 + r cos φ ¯ı3 ,
(2.92)
where r ≥ 0, 0 ≤ φ ≤ π, and 0 ≤ θ < 2π. The following notation was used: η1 = r, η2 = φ, and η3 = θ. The following summarizes important formulæ in spherical coordinates. The scale factors are h1 = 1, h2 = r, and h3 = r sin φ. The curvatures of the spherical coordinate system all vanish, except that R23 = r, R31 = r tan φ and R32 = −r. The base vectors expressed in terms of the Cartesian system are sin φ cos θ ¯ı1 + sin φ sin θ ¯ı2 + cos φ ¯ı3 ,
(2.93a)
e¯2 = cos φ cos θ ¯ı1 + cos φ sin θ ¯ı2 − sin φ ¯ı3 , sin θ ¯ı1 + cos θ ¯ı2 . e¯3 = −
(2.93b) (2.93c)
e¯1 =
The time derivatives of the based vectors resolved along this triad are φ˙ e¯2 + θ˙ sin φ e¯3 , e¯˙ 2 = −φ˙ e¯1 + θ˙ cos φ e¯3 , ˙ φ e¯1 + cos φ e¯2 ). e¯˙ 3 = −θ(sin
e¯˙ 1 =
(2.94a) (2.94b) (2.94c)
Finally, the position, velocity, and acceleration vectors, resolved along the base vectors of the spherical coordinate system are p0 = r e¯1 ,
(2.95a)
(2.95b) v = r˙ e¯1 + rφ˙ e¯2 + rθ˙ sin φ e¯3 , a = (¨ r − rφ˙ 2 − rθ˙2 sin2 φ) e¯1 + (rφ¨ + 2r˙ φ˙ − rθ˙2 sin φ cos φ) e¯2 + (rθ¨ sin φ + 2r˙ θ˙ sin φ + 2rφ˙ θ˙ cos φ) e¯3 .
(2.95c)
3 Basic principles
This chapter reviews the basic principles of dynamics. Newton’s laws are the foundation of mechanics and dynamics and deal with the behavior of particles subjected to forces. Section 3.1 presents Newton’s three laws and the principle of work and energy. Section 3.2 introduces the concept of conservative forces that play a fundamental role in dynamics. The principle of conservation of energy is discussed in section 3.2.1. The potentials of common conservative forces are given in section 3.2.2, which also introduces the concept of strain energy for rectilinear and torsional springs. The principle of impulse and momentum is discussed in section 3.2.4. Section 3.3 presents basic facts about contact forces because they play an important role in dynamics. Newton’s law only apply to a single particle; section 3.4 introduces Euler’s ſrst and second laws, which are applicable to very general systems of particles.
3.1 Newtonian mechanics for a particle Newton’s laws deal with the motion of a particle, i.e., a body of mass m that presents no physical dimension. This abstraction can be visualized by considering a body of mass m and ſnite dimensions. Next, the dimensions of the body are allowed to shrink, while the mass remains constant; at the limit, a particle of mass m is obtained that occupies a single point in space. As the particle moves, the locus of all positions it occupies in time describes a curve in three-dimensional space called the path of the particle. 3.1.1 Kinematics of a particle The position vector of particle P with respect to an inertial frame will be denoted as xP/O , meaning “position vector of particle P with respect to point O,” which is the origin of the inertial frame. Newton’s laws assume the existence of an inertial
O. A. Bauchau, Flexible Multibody Dynamics, DOI 10.1007/978-94-007-0335-3_3 © Springer Science+Business Media B.V. 2011
58
3 Basic principles
frame, that is, a frame that is stationary with respect to the distant stars. In many practical applications, a frame attached to the earth may be used as an inertial frame. For instance, when studying the dynamics of a jet engine on a test bench, a frame of reference attached to the test bench is appropriate. If the same engine is mounted on an aircraft wing, a frame attached to the wing would not be inertial, because the aircraft is itself moving; for such a problem, a frame attached to the surface of the earth could be considered to be inertial. Finally, when studying the motion of satellites, it becomes necessary to select an inertial frame attached to the sun. The inertial velocity vector or absolute velocity vector of the particle is the time derivative of its position vector with respect to the origin of the inertial frame v=
dxP/O = x˙ P/O , dt
(3.1)
where t indicates time. More often than not, the term “velocity vector” will be used instead of “inertial velocity vector.” The norm of the velocity vector is called the speed, v, of the particle v = v. (3.2) Finally, the particle inertial acceleration vector or absolute acceleration vector is deſned as the derivative of the absolute velocity vector a=
d2 xP/O dv = . dt dt2
(3.3)
3.1.2 Newton’s laws This section presents Newton’s three laws and Newton’s law of gravitation. These laws provide the foundation of dynamics and mechanics. Newton’s ſrst law Newton’s ſrst law of motion states that every object in a state of uniform motion tends to remain in that state of motion unless an external force is applied to it. The expression “state of uniform motion” means that the object moves at a constant velocity. If several forces are applied to the object, the “external force” is, in fact, the resultant, i.e., the vector sum, of all externally applied forces. Finally, the “object” mentioned in the law is to be understood as a particle, as deſned in the previous section. With all these clariſcations, Newton’s ſrst law can be restated: a particle moves at a constant velocity unless the sum of the externally applied forces does not vanish. This also implies that if the sum of the externally applied forces does not vanish, the particle no longer moves at a constant velocity. A more mathematical statement of Newton’s ſrst law is Law 1 (Newton’s ſrst law) A particle moves at a constant velocity if and only if the sum of the externally applied forces vanishes.
3.1 Newtonian mechanics for a particle
59
The expression “if and only if” is included in the statement because the vanishing of the externally applied forces is both a necessary and sufſcient condition for the particle to move at a constant velocity. For statics problems, is is customary to focus on particles at rest rather than moving at a constant velocity. Within this framework, Newton’s ſrst law becomes: a particle is at rest if and only if the sum of the externally applied forces vanishes. This statement provides the deſnition of static equilibrium and is the foundation of statics and structural mechanics. Newton’s second law Newton’s second law states that if a force is acting on a particle, its acceleration is proportional to this force; the constant of proportionality is the mass of the particle. Here again, the force acting on the particle is the vector sum of all externally applied forces. Both externally applied force and resulting acceleration must be understood as vector quantities, and furthermore, the acceleration vector is the inertial acceleration vector as deſned by eq. (3.3). Newton’s second law then states Law 2 (Newton’s second law) The inertial acceleration vector of a particle is proportional to the vector sum of the externally applied forces; the constant of proportionality is the mass of the particle. In mathematical terms, Newton’s second law becomes F = ma,
(3.4)
where F is the sum of the externally applied forces acting on the particle, a its inertial acceleration vector, and m its mass. Clearly, the Newton’s ſrst law is implied by the second. Newton’s second law provides the equations of motion for a particle; it relates the motion of the particle to the externally applied forces. Newton’s third law Newton’s third law is also of fundamental importance to dynamics. It states: if particle A exerts a force on particle B, particle B simultaneously exerts on particle A a force of identical magnitude and opposite direction. It is also postulated that these two forces share a common line of action. In a more compact manner, Newton’s third law states that Law 3 (Newton’s third law) Two interacting particles exert on each other forces of equal magnitude, opposite directions, and sharing a common line of action. Newton’s third law is most useful when dealing with systems of particles: it enables the appropriate modeling of the interaction forces among the particles. It also allows “isolating” or “disconnecting” a particle from its surroundings and replacing the connection by a set of forces of equal magnitudes, opposite directions, and sharing a common line of action. This technique is the basis for drawing free body diagrams of a particle or system of particles.
60
3 Basic principles
Newton’s law of gravitation Newton’s law of gravitation also plays an important role in dynamics. It states that Law 4 (Newton’s law of gravitation) Two particles attract each other in proportion to their masses and in inverse proportion to the square of their relative distance. The line of action of this attractive force joins the two particles. This implies
m1 m 2 , (3.5) r2 where F is the magnitude of the attractive force, m1 and m2 the masses of the two particles, r their relative distance, and G the constant of proportionality know as the universal constant of gravitation. Figure 3.1 shows the force, F 12 , that the second particle exerts on the ſrst, and the force, m2 r F 21 , that the ſrst exerts on the second. Forces F21 F 12 and F 21 have the same magnitude F = F12 F 12 = F 21 , opposite directions F 12 + m1 F 21 = 0, and share a common line of action that joins the two particles. Clearly, these two Fig. 3.1. Gravitation force acting beforces present an important example of Newtween two particles. ton’s third law. F =G
3.1.3 Systems of units The quantities involved in Newton’s three laws are length, mass, time, and force, denoted L, M , T , and F , respectively. In view of Newton’s second law, eq. (3.4), these three quantities are not independent, rather F = M L/T 2. This text uses the SI system of units exclusively. In this system of units, the three basic units are length, mass, and time, measured in meters, denoted “m,” kilograms, denoted “kg,” and seconds, denoted “s,” respectively. Force is then a derived unit measured in Newtons, denoted “N.” A force of 1 N imparts an acceleration of 1 m/s2 to a mass of 1 kg. Systems of units where mass is a basic unit are said to be absolute: the SI system is an absolute system of units. In this set of units, the universal constant of gravitation is G = 6.6732 10−11 m3 /(kg · s2 ).
(3.6)
In view of the small value of this constant, the attractive force acting between objects of small masses is very small. The attractive force between particles, however, is large if one of the particles has a large mass. The weight, w, of a particle at the surface of the earth is deſned as the gravitational force applied by the earth to the particle, w=
GM m, re2
(3.7)
3.1 Newtonian mechanics for a particle
61
where M = 5.976 1024 kg is the mass of the earth, re = 6, 378 km its radius, and m the mass of a particle located at the surface of the earth. Using these constants, it follows that the weight of a particle is w = 9.803 m = gm, where g = 9.803 m/s2 is the gravitational constant at the surface of the earth. Because the earth is not a perfect sphere and its mass distribution is not uniform, small variations of the gravitational constant should be expected from point to point. For most dynamics problems, g = 9.81 m/s2 will be a sufſciently accurate value of the gravitational constant. At the surface of the earth, the weight of an 80 kg person is w = 9.81 × 80 = 785 N. In the US customary system of units, the three basic unit are length, time, and force, measured in feet, denoted “ft,” seconds, denoted “s,” and pounds, denoted “lbs,” respectively. In this system, mass is then a derived unit measured in slugs, denoted “slug.” A mass of 1 slug weighs 1 lb when subjected to a gravitational acceleration of 1 ft/s2 . Systems of units where force is a basic unit are said to be gravitational: the US customary system is a gravitational system. In the US customary system, g = 32.17 ft/s2 , and the mass of a particle at the surface of the earth is then found as m = w/g. It should be noted that in the US customary system, length is sometimes measured in inches rather than feet; in this case, g = 386 in/s2 . 3.1.4 The principle of work and energy m Figure 3.2 depicts a particle of mass m whose dr(t) ti position is described by position vector r(t) i3 with respect to an inertial frame, F I = r(t) q [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. While moving along its tf F(t) path, the particle is acted upon by forces, the reO sultant of which is F (t). These forces are called i2 I externally applied forces, or impressed forces. i1 The differential work, dW , the resultant force performs on the particle as it moves by an Fig. 3.2. Force acting on a particle. differential distance, dr, is deſned as the scalar product of the force vector by the differential displacement vector of its point of application dW = F T dr. (3.8)
In view of the deſnition of the scalar product, this differential work can be written as dW = F dr cos θ, where θ is the angle between the force and the differential displacement vectors, see ſg. 3.2. If the force is normal to the differential displacement, the differential work vanishes, although the force is of ſnite magnitude. The notation dW is used to indicate the differential work, but it does not imply the existence of a work function, W , such that d(W ) is the differential work. Introducing Newton’s second law, eq. (3.4), into the deſnition of the differential work leads to dW = F T dr = maT dr = m
dv T dv T dr dt = m v dt = m v T dv. dt dt dt
(3.9)
62
3 Basic principles
The kinetic energy, K, of the particle is deſned as 1 K = mv T v. (3.10) 2 The differential change in kinetic energy is d(K) = m v T dv, and it follows that (3.11)
dW = d(K).
Consider now two arbitrary instants during the motion of the particle, say times ti and tf , as illustrated in ſg. 3.2. The work done by the force over this period is denoted Wti →tf and can be evaluated as follows % tf % tf Wti →tf = F T dr = d(K) = K(tf ) − K(ti ) = Kf − Ki = ΔK. (3.12) ti
ti
This result is known as the principle of work and energy. Principle 1 (Principle of work and energy for a particle) The work done by the external forces acting on a particle equals the change in the particle’s kinetic energy.
3.2 Conservative forces Figure 3.2 depicts a particle of mass m whose position is described by position vector r(t) with respect to an inertial frame, F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. Conservative forces are a class of forces that depend only upon the position of the particles on which they act, F = F (r). Although these forces may vary with time as the particle moves, they do not depend explicitly on time or velocity. Figure 3.3 shows two arbitrary paths, denoted ACB and ADB, along which the particle moves in space from point A to point B. Deſnition By deſnition, force F is conservative if and only if the work it performs along any path joining the same initial and ſnal points is identical. This is expressed by the following equation % % T WA→B = F dr = F T dr. (3.13) Path ACB
Path ADB
Since reversing the limits of integration simply changes the sign of the integral, the work done by the force along path ADB is equal in magnitude and opposite in sign to that along path BDA. Equation (3.13) then implies the vanishing of the work done by the force over the closed path ACBDA. Because path ACB and ADB are arbitrary paths joining points A and B, it follows that a force is conservative if and only if the work it performs vanishes over any arbitrary closed path, & & W = F T dr = F T dr = 0, (3.14) Any path
where C is an arbitrary closed curve.
C
3.2 Conservative forces
B
Path ACB C m D
F(r)
n Path ADB
A
r i1
63
C
i3 O I
S i2
Fig. 3.3. Paths ACB and ADB join the same two points, A and B.
Fig. 3.4. Path enclosing a surface of area S with a normal n ¯.
Potential of a conservative force Based on the deſnition of conservative forces, eq. (3.14), Stokes’ theorem [2] then implies that & % dS = 0, F T dr = n ¯ T ∇F (3.15) C
S
where S is a surface bounded by curve C, n ¯ the outward normal to surface S, as = curl(F ). If the force is conservative, the surface integral shown in ſg. 3.4, and ∇F must vanish for any surface, S, and this can only occur if the integrand vanishes, = 0 for any curve, C, and surface, S. Textbooks on vector algebra [2], leading to ∇F prove the following identity: ∇∇V = 0, where V is an arbitrary scalar function and = 0 is ∇V = grad(V ). It can then be shown that the solution of equation ∇F simply F = −∇V, (3.16) where ∇ is the gradient operator. If a vector ſeld, F , can be derived from a scalar function, V , this function is called a potential, and the vector function is said to “be derived from a potential.” Because the potential is an arbitrary scalar function, the minus sign is redundant, but is, however, a convention that will be justiſed later. It has now been established that if a force is conservative, it can be “derived from a potential.” In more mathematical terms, a conservative force must be the gradient a scalar function, called the potential of the force. If I = (¯ı1 , ¯ı2 , ¯ı3 ) is an orthonormal basis, conservative forces can be expressed as F = −∇V = −
∂V ∂V ∂V ¯ı1 − ¯ı2 − ¯ı3 . ∂x1 ∂x2 ∂x3
(3.17)
The work done by a conservative force over an arbitrary path joining point 1 to point 2, with position vectors r 1 and r 2 , respectively, is then % r2 % r2 % r2 ∂V ∂V ∂V F T dr = − ∇T V dr = − dx1 + dx2 + dx3 W1→2 = ∂x ∂x ∂x 1 2 3 r1 r1 r1 % r2 =− dV = V (r 1 ) − V (r 2 ). r1
64
3 Basic principles
Thus the work done by a conservative force along any path joining point 1 to point 2 depends only on the positions of these points and can be evaluated as the difference between the values of the potential function expressed at these two points, W1→2 = V (r 1 ) − V (r 2 ) = −ΔV.
(3.18)
If point 1 and 2 are an inſnitesimal distance apart, dW = V (r 1 ) − V (r 1 + dr) = −d(V ).
(3.19)
The differential work is now the true derivative of the potential function. Summary Conservative forces enjoy a number of remarkable properties. Initially, conservative forces are deſned as forces that perform the same work along any path joining the same initial and ſnal points, as expressed by eq. (3.13). Simple calculus reasoning is then used to prove that a force is conservative if and only if the work it performs vanishes over any arbitrary closed path, see eq. (3.14). Finally, conservative forces are shown to be derivable from a potential, as expressed by eq. (3.16). Consequently, the work done by a conservative force along any path joining two points can be evaluated as the difference between the potential function evaluated at these two points, see eq. (3.18). Examples of conservative forces To illustrate these concepts, consider the gravity force acting on a particle of mass m located at the surface of the earth. It can easily be shown that this force is conservative. Therefore, the scalar potential, V , of the gravity forces is V = mg r·¯ı3 = mgx3 , where r = x1¯ı1 + x2¯ı2 + x3¯ı3 is the position vector of the particle. The gravity force, F g , acting on the particle can be obtained from this potential using eq. (3.17) to ſnd F g = −∇V = −∂V /∂x3 ¯ı3 = −mg¯ı3 , and the gravity forces is said to be “derived from a potential.” The work done by the' gravity force as the ' x3bparticle moves from elevation x3a to x3b x3b then becomes W = x3a F g · dr = − x3a ∂V /∂x3 dx3 = V (x3a ) − V (x3b ). Clearly, this work depends on the initial and ſnal elevations only, but not on the particular path followed by the particle as it moved from the initial to the ſnal elevation. If the particle moves along a closed path starting and ending at the same elevation, the work done by the gravity force vanishes. As another example, consider the restoring force of an elastic spring of stiffness constant k. If the spring is stretched by an amount u, the restoring force is −ku, and can be derived from a potential of the form V (u) = 1/2 ku2 . Indeed, using eq. (3.17), the elastic force in the spring becomes Fs = −∂V /∂u = −ku. This relationship is the constitutive law for the spring because it relates the force in the spring to its elongation.
3.2 Conservative forces
65
Quantity V (u) is called the strain energy and it can be viewed as a “potential of the elastic forces” in the spring. Hence, the strain energy function implicitly deſnes the constitutive behavior of the component. Finally, the work' done by the u elastic restoring force as the spring stretches from ua to ub is W = uab Fs du = ' ub − ua ∂V /∂u du = V (ua ) − V (ub ). Here again, the work depends only on the initial and ſnal positions. At ſrst glance, the potential of a gravity force and the strain energy of an elastic spring seem to be distinct, unrelated concepts. Both quantities, however, share a common property: forces can be derived from these scalar potentials. Consider a particle of mass m connected to an elastic spring of stiffness constant k and subjected to a gravity force acting in the direction of the spring. The downward displacement, u, of the mass measures both the spring stretch and the elevation of the particle. The externally applied gravity force can be derived from the potential, V = mgu, as Fg = −∂V /∂u = −mg; the restoring force in the spring can be derived from the strain energy, V = 1/2 ku2 , which can also be viewed as the potential of the internal forces, as Fs = −∂V /∂u = −ku. The two forces acting on the particle can therefore be derived from a potential. 3.2.1 Principle of conservation of energy The forces applied to a particle can be divided into two categories: the conservative forces, which can be derived from a potential, and the non-conservative forces, for which no potential function exists. The principle of work and energy, eq. (3.11), now becomes dW = dWc + dWnc = −d(V ) + drT F nc = d(K), (3.20) where dWc and dWnc indicate the differential work done by the conservative and non-conservatives forces, respectively, and F nc denotes the non-conservative forces. The work done by these forces over the period from time ti to tf now becomes %
tf
%
tf
F Tnc dr = Kf − Ki .
(3.21)
The ſrst term of this expression readily integrates to yield % tf F Tnc dr = (Kf + Vf ) − (Ki + Vi ),
(3.22)
ti
−d(V ) +
ti
ti
where Vi = V (ti ) and Vf = V (tf ) are the values of the potential function at the initial and ſnal times, respectively. The total mechanical energy, E, is deſned as the sum of the kinetic energy and potential function, E = K + V. (3.23) The principle of work an energy principle now becomes
66
3 Basic principles
%
tf
F Tnc dr = Ef − Ei .
(3.24)
ti
If the particle is acted upon by conservative forces only, the principle of work and energy reduces to Ef = Ei . (3.25) This statement is known as the principle of conservation of energy. Principle 2 (Principle of conservation of energy for a particle) If a particle is subjected to conservative forces only, the total mechanical energy is preserved. Clearly, the term “conservative forces” stems from the fact that in the sole presence of such forces, the total mechanical energy of the particle is conserved. In view of the principle of work and energy, work, kinetic energy, potential energy, and total mechanical energy all share the same units, force times distance, N·m. A Joule is deſned as 1 J = 1 N·m. Although the moment of a force has the same units, N·m, Joules are used only when dealing with energy; in other words, a 10 N·m moment should not be referred to as a 10 J moment. The work done by force over a period of time from ti to tf , see eq. (3.12), can be written as % tf % tf % tf T T dr dt = Wti →tf = F dr = F F T v dt. (3.26) dt ti ti ti The last integrand, F T v, is the power of the externally applied forces; it is a measure of the work done by the forces per unit time. Power has units of work divided by time, J/s. A Watt is deſned as 1 W = 1 J/s = 1 N·m/s. 3.2.2 Potential of common conservative forces In the previous section, it was shown that conservative forces are associated with special functions called potential functions, from which they can be derived. A few commonly used potential functions will be derived in this section. Work done by a central force First, the work done by a central force will be evaluated. A central force is such that its line of action passes m through a ſxed inertial point in space and its magniF tude depends on the sole distance r between the particle i2 I O and the ſxed point. Figure 3.5 shows a particle of mass m subjected to a central force F whose line of action i1 passes through point O, the origin of an inertial frame. Fig. 3.5. A central force. Because distance r between the origin and the particle is inherent to the deſnition of the central force, it seems natural to use the spherical coordinate system deſned in section 2.7.2 to express the position of the particle. i3
r
e1
3.2 Conservative forces
67
The velocity of the particle expressed in spherical coordinates, see eq. (2.95b), is v = r˙ e¯1 + rφ˙ e¯2 + rθ˙ sin φ e¯3 . Multiplying this relationship by dt reveals the relationship between an increment in particle position, dr, and increments in coordinates dr, dθ, and dφ, as dr = dr e¯1 + rdφ e¯2 + rdθ sin φ e¯3 . On the other hand, the central force is expressed as F = −f (r)¯ e1 , where f (r) is its magnitude that depends on r only, and e¯1 its line of action, always passing through point O. The differential work done by the central force now becomes dW = F T dr = −f (r)¯ eT1 (dr e¯1 +rdφ e¯2 +rdθ sin φ e¯3 ) = −f (r)dr. The potential, V , of the central force is deſned as dV . (3.27) f (r) = dr With this deſnition, the differential work done by the central force becomes dW = −
dV dr = −d(V ). dr
Because the differential work can be expressed as an exact differential, the central force is a conservative force, and its potential is the integral of the magnitude of the central force. The potential is deſned within a constant: adding a constant to the potential does not alter the magnitude of the central force. The potential of gravity forces An important example of central forces are gravitational forces, as described by Newton’s gravitation law. The magnitude of the gravitational force is given by eq. (3.5) as f (r) = GM m/r2 . The gravitational force acts on an particle of mass m due to the presence of another particle of mass M assumed to be ſxed with respect to an inertial frame; ſg. 3.1 shows that such force is a central force. The potential function for the gravity forces then follows from eq. (3.27) as V (r) = −G
Mm . r
(3.28)
This potential is called the potential of gravity forces. Consider now a particle located at a height h above the surface of the earth; this implies r = re + h, where re is the radius of the earth. If the particle is close to the surface of the earth, h re and 1/r = 1/[re (1 + h/re )] ≈ (1 − h/re )/re . The potential function now becomes: V (r) = −GM m/re + GM mh/re2 . Because the ſrst term of this expression is a constant, it can be omitted to yield the potential function as M mh V (r) = G 2 = mgh. (3.29) re This potential function is the potential of gravity forces for particles located near the surface of the earth. The height, h, of the particle is measured from a reference elevation, called the datum, which is selected in an arbitrary manner. Indeed, changing the datum is equivalent to adding a constant to the potential function, leaving the gravitation forces unchanged.
68
3 Basic principles
The strain energy function of an elastic spring Consider now a particle of mass m connected to a rectilinear spring; the other end of the spring is attached to inertial point O, as depicted in ſg. 3.6. The spring can stretch elastically, but is massless; it practice, this means that the mass of the spring is negligible with respect to that of the particle. Clearly, the situation is similar to that shown e1 i3 in ſg. 3.5: the particle is subjected to a central r force F (r) = −f (r)¯ e1 . The magnitude of the cenm tral force is related to the stretch of the spring, k I Δ = r − r0 , where r0 is the un-stretched length i2 O of the spring. For a linearly elastic spring, the force i1 in the spring is proportional to its stretch, f (r) = Fig. 3.6. Particle connected to an k(r − r0 ) = kΔ, where k is the spring stiffness constant. The units of the spring stiffness constant are elastic spring. N/m. The potential function of the elastic forces in the spring then follows from eq. (3.27) as 1 V (r) = k Δ2 . (3.30) 2 This work function is often called the strain energy function for the elastic spring. The present formulation is not limited to linearly elastic springs: the magnitude of the elastic force in the spring could be a nonlinear function of the stretch, such as f (r) = k1 Δ + k3 Δ3 . In this case, the strain energy function of the nonlinearly elastic spring is V = 1/2 k1 Δ2 + 1/4 k3 Δ4 . The principle of work and energy affords a description of the kinetics of a particle in terms of energies rather than displacements and accelerations. Consider the system depicted in ſg. 3.6, at time t0 , the particle is at rest and the spring is un-stretched: the velocity of the particle vanishes, implying K0 = 0, and V0 = 0, because the spring is un-stretched. External forces are applied to the particle that bring it to a new rest conſguration at time t1 , hence K1 = 0. Because the system is conservative, ext the work done by the external forces is W0→1 = E1 − E0 = V1 . For this simple case, the principle of work and energy implies that the work done by the externally applied force equals the strain energy in spring. This work is stored in the system in the form of strain energy: no energy has been lost, but its nature has changed from potential to strain energy. In this description, the trajectory of the particle from time t0 to time t1 is irrelevant; the only important quantity is the stretch, Δ1 , of the spring at time t1 , which determines the strain energy, V1 . This is a characteristic of conservative forces: the work they perform does not depend on the particular path followed from time t0 to t1 , but only on the initial and ſnal conſgurations of the system that determine the initial and ſnal stretch of the spring. Next, the set of external forces that maintained the steady deformation Δ1 of the spring is released; the particle evolves along a certain trajectory and at time t2 , the stretch of the spring vanishes, Δ2 = 0. Because no external forces are applied
3.2 Conservative forces
69
ext between time t1 and t2 , the principle of work and energy implies W1→2 = 0 = E2 − E1 = K2 − V1 , where K2 is the kinetic energy of the particle at time t2 . No energy has been lost: the energy transformed from strain to kinetic energy, K2 = V1 . The speed v2 of the particle at time t2 is v2 = k/m Δ1 . Here again, the speciſc trajectory followed by the particle is not relevant. Both kinetic and strain energy functions are positive-deſnite functions, i.e., K = 1/2 mv 2 > 0 for any arbitrary speed of the particle v = 0 and V = 1/2 kΔ2 > 0 for any stretch of the elastic spring Δ = 0. Consider a strain energy function of the form V = 1/2 k0 Δ2 + 1/3 k1 Δ3 ; this strain energy function vanishes for Δcr = −3/2 k0 /k1 . For stretches Δ < Δcr , the strain energy becomes negative, hence this strain energy function is invalid because it is not positive-deſnite. For Δ < Δcr , the spring will add energy to the system; energy is being created, a physical impossibility for a passive device.
The strain energy function of a torsional spring Consider the planar problem depicted in ſg. 3.7: e2 e1 a particle of mass m is connected to a rigid rod i3 m r of length . The rod pivots about inertial point O, l where a torsional spring of stiffness constant k is loF k q cated. The torsional spring applies a moment to the i2 O rigid rod about point O, which is then transmitted to the particle in the form of a force F , acting in the direction normal to the rod; this force is clearly not Fig. 3.7. Particle subjected to a force generated by a torsional a central force. The position of the particle will be spring. represented by polar coordinates, r and θ, see section 2.7.1. The velocity of the particle is v = r˙ e¯1 + rθ˙ e¯2 , see eq. (2.91b). Because the rod is rigid, r˙ = 0, and multiplying the velocity relationship by dt implies dr = dθ e¯2 . The force vector, F , has a line of action along e¯2 and its magnitude is a function of the sole angle θ: F = −f (θ)¯ e2 . The differential work done by this force now becomes dW = F T dr = −f (θ)¯ eT2 dθ¯ e2 = −f (θ)dθ. (3.31) Clearly, M (θ) = f (θ) is the moment the torsional spring applies to the rigid rod and hence, dW = −M (θ)dθ. For a linearly elastic torsional spring, M (θ) = k(θ − θ0 ), where θ0 is the angular position of the rigid rod for which the torsional spring is unstretched. The units for the stiffness constant k are N·m/rad. The potential function for the torsional spring now becomes V (θ) =
1 k(θ − θ0 )2 . 2
(3.32)
This potential function is called the strain energy function of the torsional spring. It is also possible to deſne nonlinearly elastic torsional springs, for which the elastic moment is a nonlinear function of angle θ; for instance, if M (θ) = k1 (θ − θ0 ) + k3 (θ − θ0 )3 , the strain energy function is then
70
3 Basic principles
V (θ) = k1 (θ − θ0 )2 /2 + k3 (θ − θ0 )4 /4. 3.2.3 Non-conservative forces Consider now a particle of mass m connected to a rectilinear dashpot; the other end of the dashpot r m is attached to an inertial point O, as depicted in ſg. 3.8. The dashpot can slide axially and it is massc I i2 less; in practice, this means that its mass is negligiO i1 ble compared to that of the particle. For a linear dashpot, the magnitude of viscous Fig. 3.8. Particle connected to a force it generates is proportional to the time rate of dashpot. change of its length, i.e., f (r) ˙ = cr. ˙ The coefſcient c is called the dashpot constant and it units are N·s/m. Although the line of action of the force generated by the dashpot passes through an inertial point, it is not a central force because its magnitude does not depend on the sole distance between the particle and the inertial point. If the position of the particle is expressed in terms of spherical coordinates, differential displacements are then dr = dr e¯1 + rdφ e¯2 + rdθ sin φ e¯3 . The differential work done by the dashpot force now becomes dW = F T dr = −f (r)¯ ˙ eT1 (dr e¯1 + rdφ e¯2 + rdθ sin φ e¯3 ) = −cr˙ dr. Because of the r˙ dependency of the viscous force, the differential work cannot be cast in the form of an exact differential; there exist no potential function, V (r), such that dV /dr = −crdr. ˙ The force in the dashpot is a non-conservative force. The work done by the viscous forces in the dashpot is % tf % tf % tf dr Wti →tf = − dt = − cr˙ dr = − cr˙ cr˙ 2 dt < 0. (3.33) dt ti ti ti i3
e1
The presence of the r˙ 2 term implies that the work done by the viscous forces is always negative, i.e., they are dissipative forces. For the system depicted in ſg. 3.8, the principle of work and energy implies that Wti →tf = Ef − Ei , or Ef = Ei + Wti →tf . Because the work is a negative quantity, the total mechanical energy of the system monotonically decreases in time; furthermore, the change in total mechanical energy exactly equals the work done by the viscous forces in the dashpot. This result explains the term “dissipative forces” or “non-conservative forces” used to qualify the viscous forces in the dashpot. Of course, dashpots are not always linear; the magnitude of the viscous force could be a nonlinear function of velocity, such as f (r) ˙ = c1 r˙ + c3 r˙ 3 , for instance. Function f (r) ˙ r, ˙ however, must be a positive-deſnite function of r˙ to guarantee the dissipative nature of the resulting viscous force. Finally, it is also possible to encounter torsional dashpots; in ſg. 3.7, the torsional spring would be replaced by a dashpot that applies to the rigid bar a moment whose magnitude is a function of the time rate of change of angle θ. The differential work done by the viscous forces in the torsional is then ˙ ˙ ˙ = cθ, ˙ where dW = −f (θ)dθ = −M (θ)dθ; for a linear torsional dashpot, M (θ)
3.2 Conservative forces
71
the dashpot constant now has units of N·m·s. The energy closure equation
't Consider the work and energy principle given by eq. (3.24), written as tif F Tnc dr = Ef − Ei . In this expression, the initial and ſnal time instants can be selected arbitrarily; in particular, let the ſnal time be an arbitrary time, tf = t, during the evolution of the system. The principle of work and energy now becomes % t E(t) − F Tnc dr = Ei . (3.34) ti
In the absence of non-conservative forces, this equation reduces to E(t) = Ei , the statement of conservation of the total mechanical energy of the system. Even in the presence of non-conservative forces, however, equation (3.34) implies the conservation a scalar quantity, the difference between the total mechanical energy and the cumulative work done by the non-conservative forces, must remain constant. This relationship is known as the energy closure equation. Example 3.1. bungee jumping A man of mass m is jumping off a bridge while attached to a bungee cord of unstretched length d0 . An inertial frame, F = [O, I = (¯ı1 , ¯ı2 )], is attached to the bridge. The man is jumping from point O with an initial velocity, v0 , oriented along horizontal axis ¯ı2 , and the acceleration of gravity is acting along vertical axis ¯ı1 . During the ſrst part of his fall, the man is in free ƀight under the effect of gravity, and at some instant in time, the bungee becomes taut. During the second portion of his fall, the man is subjected to the combined effects of gravity and the elastic force of the bungee. The potential of the bungee is of the following form: Vb = ¯ where Δ¯ = (d − d0 )/d0 = Δ/d0 is the non-dimensional 1/2 k0 d20 ln2 (1 + Δ), stretch of the bungee, and d the distance from point O to the man. The magnitude of ¯ ¯ the force the bungee applied to the man is Fb = dV /dΔ = k0 d0 ln(1 + Δ)/(1 + Δ). Determine the trajectory of the fall. Free fall Let the man’s trajectory be denoted r(t) = x1 (t) ¯ı1 + x2 (t) ¯ı2 . During free fall, Newton’s second law writes m¨r = mg¯ı1 , where g is the acceleration of gravity. Integration yields 1 v¯ = g¯τ¯ı1 + ¯ı2 , ¯r = g¯τ 2¯ı1 + τ¯ı2 . (3.35) 2 The following non-dimensional quantities were introduced: ¯r = r/d0 , v¯ = r˙ /v0 , τ = v0 t/d0 , and g¯ = gd0 /v02 . The bungee cord becomes taut when r = d0 , or ¯r(τt )2 = 1, where τt denotes the instant at which the bungee becomes taut. Introducing this condition in eq. (3.35) and solving for τt yields √ 2 τt = 1 + g¯2 − 1. (3.36) g¯
72
3 Basic principles
Trajectory when the bungee cord is taut Once the bungee is taut, Newton’s second law implies m¨r = mg¯ı1 + Fb u ¯, were Fb is the magnitude of the elastic force the bungee applies on the man and u ¯ the unit vector pointing from the man to point O. The distance from the man to point O is d = d0 + Δ = x21 + x22 , and u ¯ = (x1 ¯ı1 + x2 ¯ı2 )/d. In non-dimensional form, the equation of motion becomes ¯ ln(1 + Δ) ¯r = g¯ ¯ı1 − k¯0 (¯ x1 ¯ı1 + x ¯2 ¯ı2 ), ¯ (1 + Δ)2
(3.37)
where (·) indicates a derivative with respect to the non-dimensional time τ , Δ¯ = x ¯21 + x¯22 − 1, k¯0 = k0 d20 /(mv02 ), x¯1 = x1 /d0 , and x ¯2 = x2 /d0 . Because the equations of motion are nonlinear, their solution can only be obtained by means of numerical methods, which often require recasting the governing equations in ſrst-order form. In the present case, the ſrst-order form of the equations is ⎫ ⎧ v¯1 ⎪ ⎧ ⎫ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ v ¯ x ¯ ⎪ ⎪ ⎪ ⎪ 2 1⎪ ⎪ ⎪ ⎪ ⎨ ⎬ ⎬ ⎨ ¯ ln(1 + Δ) x ¯2 ¯ x ¯ = g¯ − k0 1 ¯ 2 ⎪, v¯1 ⎪ ⎪ ⎪ (1 + Δ) ⎪ ⎪ ⎪ ⎩ ⎪ ⎪ ⎪ ⎭ ¯ ⎪ ⎪ ln(1 + Δ) v¯2 ⎪ ⎪ ⎪ ⎪ ¯ ⎩ − k0 x ¯ 2 ¯2 ⎭ (1 + Δ) where v¯1 = v1 /v0 and v¯2 = v2 /v0 are the non-dimensional components of vertical and horizontal velocity, respectively. The ſrst two equations, x ¯1 = v¯1 and x ¯2 = v¯2 , simply deſne the velocity components, v¯1 and v¯2 , and the last two equations are the actual equations of motion. In this form, many standard time integration methods such as Runge-Kutta integrators, among many others, can be used. Extensive discussion of these integrators can be found in many textbook on numerical analysis, see refs. [4, 5], for instance. The following non-dimensional parameters are used for the simulation: g¯ = 12, and k¯0 = 50. The end of the free fall phase occurs at time τt = 0.4254. Figure 3.9 show the man’s trajectory during free fall and when the bungee cord is taut. For all times τ < τt the bungee cord is slack and its stretch vanishes; ſg. 3.10 shows the ¯ for τ ≥ τt . bungee’s non-dimensional stretch, Δ, At time τ = 1.5018, the bungee becomes slack again, and equation of motion, eq. (3.37), is no longer valid because it include the force stemming from the bungee cord. To continue the simulation past that time, the equation of motion for free fall under gravity, m¨r = mg¯ı1 , would be used again, with initial conditions corresponding to the man’s position and and velocity at the end of the previous phase, i.e., at time τ = 1.5018. Figure 3.11 depicts the bungee non-dimensional force, F¯b = Fb /(k0 d0 ), versus ¯ The apparent stiffness, k, of the bungee cord is the its non-dimensional stretch, Δ. tangent to the force-stretch curve,
3.2 Conservative forces 0
73
1.5
BUNGEE STRETCH D/d0
-0.5
x1/d0
-1
-1.5
-2
-0.4 -0.2
0
0.2
1
0.5
0 0.4
0.4
x2/d0
Fig. 3.9. Man’s trajectory. The symbols ◦ indicate the free fall portion of the trajectory.
k=
0.6
0.8
1
t
1.2
1.4
1.6
1.8
Fig. 3.10. Non-dimensional stretch of the ¯ versus time τ . bungee, Δ,
¯ 1 − ln(1 + Δ) dFb = k0 ¯2 . dΔ (1 + Δ)
(3.38)
As the stretch of the cord increases, its stiffness decreases and vanishes when ln(1 + ¯ = 1, or Δ¯ ≈ 1.718. Clearly, the parameters selected for the present simulation Δ) result in a very large stretching of the bungee cord, which would threaten the safety of the jumper. 15
25
10
SYSTEM ENERGIES
20
Fb/k0
15
10
5
0
5
0
-5
-10
-15 0
0.5
D/d0
1
1.5
Fig. 3.11. Magnitude of the non-dimensional ¯ force, Fb , in the bungee versus stretch, Δ.
0
0.5
t
1
1.5
Fig. 3.12. System energies: kinetic energy, solid line; potential energy, dashed line; total mechanical energy, dashed-dotted line.
The kinetic energy of the system is K = 1/2 m˙r2 . The potential of the gravity forces is Vg = −mgx1 , and the potential of the elastic bungee cord Vb = ¯ In non-dimensional form, the total mechanical energy of the 1/2 k0 d20 ln2 (1 + Δ). system becomes ¯ = E = K + V = 1 ¯r 2 − g¯x¯1 + E mv02 mv02 mv02 2
1¯ 2 ¯ k0 ln (1 + Δ). 2
74
3 Basic principles
Figure 3.12 depicts the evolution of the system’s energies versus time τ . Because the forces acting on the system are conservative forces, the total mechanical energy remains constant during the simulation. This observation provides a validation of the derivation of the equation of motion and of its numerical solution. Effect of drag forces. The developments presented in the previous paragraphs have ignored the effect of air friction on the man’s trajectory. These forces can be taken into account in an approximate manner applying to the man a drag force, F d = −1/2 Cd ρA vv, where Cd is the non-dimensional drag coefſcient, ρ the air density, and A the man’s cross-sectional area. This drag force is at all times proportional to the square of the speed, aligned with the velocity vector, and oriented in the direction opposite to this vector. During free fall, the equation of motion is m¨r = mg¯ı1 − 1/2 Cd ρA vv; as before, the bungee cord will become taut when r(τt ) = 1. Because the governing differential equation is now a nonlinear differential equation, a numerical process must be used for its solution and time τt must be determined numerically. A closed form analytical solution such as that given by eq. (3.36) no longer exists. When the bungee cord is taut, the differential equation governing the problem becomes ¯ ln(1 + Δ) 1 ¯r = g¯ ¯ı1 − k¯0 μ ¯ C (¯ x ¯ ı + x ¯ ¯ ı ) − v¯12 + v¯22 (¯ v1 ¯ı1 + v¯2 ¯ı2 ), 1 1 2 2 d ¯2 2 (1 + Δ) where μ ¯ = ρAd0 /m. Here again, the equation of motion is nonlinear, and its solution can be obtained only by means of numerical methods 3.2.4 The principle of impulse and momentum The principle of impulse and momentum involves two sets of new quantities. First, the linear and angular momentum vectors of a particle are introduced; the angular momentum is the moment of the linear momentum vector. Next, the linear and angular impulse vectors of the externally applied forces are introduced. Principle of linear impulse and momentum Figure 3.13 shows a particle of mass m in motion with respect to an inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. The inertial velocity vector of the particle is denoted v. The linear momentum vector of a particle is deſned as the product of its mass by its inertial velocity vector p = mv. (3.39) Taking a time derivative of the linear momentum vector yields p˙ = ma. Comparing this result with Newton’s second law, eq. (3.4), leads to F = p. ˙
(3.40)
3.2 Conservative forces
75
This result implies that the time derivative of the linear momentum vector of a particle equals the sum of the externally applied forces. Clearly, this result is a direct corollary of Newton’s second law. It is interesting to integrate the above equation in i3 p = mv time, between an initial and a ſnal time, denoted ti and tf , respectively. These two instants are chosen arbitrarv h = ~r mv m ily, but ti < tf , r % tf % tf I i2 F (t) dt = p˙ dt = p(tf ) − p(ti ). (3.41) O ti
i1 Fig. 3.13. Linear and angular momenta vectors of a particle.
ti
The term on the left-hand side is called the linear impulse of the externally applied forces, and has units of mass times velocity, or N·s. Equation (3.41) expresses the principle of linear impulse and momentum for a particle.
Principle 3 (Principle of linear impulse and momentum for a particle) The linear impulse of the externally applied forces equals the change in linear momentum. In the absence of external forces, this principle implies p(tf ) = p(ti ), i.e., the linear momentum remains constant at all times, since ti and tf are instants chosen arbitrarily. In other words, the linear momentum vector of a particle remains a constant when the externally applied forces vanish. Principle of angular impulse and momentum Next, the moment of the particle’s linear momentum vector is computed with respect to point O. This quantity if more often called the angular momentum vector of the particle, hO , where the subscript, (·)O indicates that the angular momentum is computed with respect to point O. As illustrated in ſg. 3.13, the moment of the linear momentum vector is expressed as the cross product of the particle’s inertial position vector, r, by its linear momentum vector, mv, to ſnd hO = r mv.
(3.42)
Taking a time derivative of the angular momentum vector yields h˙ O = r˙ mv + rma. The time derivative of the inertial position vector, r˙ , equals the inertial velocity vector, v, eq. (3.1); it then follows that h˙ O = vmv + rma. Finally, since v mv = 0, the time derivative of the angular momentum vector reduces to h˙ O = rma The moment of Newton’s second law computed with respect to the origin of the inertial frame implies rF = rma. Comparing these two results then leads to rF = h˙ O , where the left-hand side term can be interpreted as the moment of the externally applied forces evaluated with respect to point O, denoted M O . In summary, M O = h˙ O
(3.43)
76
3 Basic principles
This result implies that the time derivative of the angular momentum vector of a particle computed with respect to an inertial point equals the sum of the externally applied moments computed with respect to the same point. Here again, this result is a direct corollary of Newton’s second law. As in the case of the linear momentum, the above equation can be integrated in time between two arbitrary instants to yield %
%
tf
tf
M O (t) dt = ti
h˙ O dt = hO (tf ) − hO (ti ).
(3.44)
ti
The term on the left-hand side is called the angular impulse of the externally applied forces, and has units of N·m·s. Equation (3.44) expresses the principle of angular impulse and momentum for a particle. Principle 4 (Principle of angular impulse and momentum for a particle) The angular impulse of the externally applied forces equals the change in angular momentum when both angular impulse and momentum are computed with respect to the same inertial point. In the absence of external moments, this principle implies hO (tf ) = hO (ti ), i.e., the angular momentum remains constant at all times. In other words, the angular momentum vector of a particle remains a constant when the externally applied moments vanish. Example 3.2. Particle in a pinned tube Figure 3.14 depicts a particle of mass m connected to inertial point A by means of a spring of stiffness k and dashpot of constant c. At the initial time, the particle is located at θ = 0, φ = π/2, and r = r0 , which corresponds to the un-stretched conſguration of the spring; r, φ, and θ form a spherical coordinate system, see section 2.7.2. The initial velocity vector of the particle is v 0 . Derive the equations of motion of the system.
i3
f
A
c
k r I O i1
q
e3 m e2
i2 e1
Fig. 3.14. Particle subjected to a central force due to a spring and dashpot.
First, Newton’s second law is used to obtain the desired equations of motion as
3.2 Conservative forces
77
m (¨ r − rφ˙ 2 − rθ˙2 sin2 φ)¯ e1 + (rφ¨ + 2r˙ φ˙ − rθ˙2 sin φ cos φ)¯ e2 + (rθ¨ sin φ + 2r˙ θ˙ sin φ + 2rφ˙ θ˙ cos φ)¯ e3 = − [k(r − r0 ) + cr] ˙ e¯1 , where the components of the acceleration vector in the spherical coordinate system are given by eq. (2.95c). Projecting this equation along the unit vectors e¯1 , e¯2 , and e¯3 , ¨ r˙ φ−r ˙ θ˙2 sin φ cos φ = then yields m(¨ r −rφ˙ 2 −rθ˙2 sin2 φ) = −k(r −r0 )−cr, ˙ rφ+2 0, and rθ¨ sin φ + 2r˙θ˙ sin φ + 2rφ˙ θ˙ cos φ = 0, respectively. These three nonlinear differential equations can be solved for the coordinates of the particle, r, φ, and θ. Although this approach will indeed yield the solution of the problem, much information about the nature of the particle’s motion can be obtained from the application the principle of angular impulse and momentum. Because the line of action of the forces applied to the particle passes through point A, the moment of these forces with respect to point A vanishes. The principle of angular impulse and momentum, eq. (3.44), then implies that the angular momentum must remain constant, H A = H A0 = r0ı1 mv 0 . It follows that r e1 mv = H A0 . This vector product equation, see section 1.1.11, affords a solution if and only if the particle’s position vector, r¯ e1 , and velocity vector, v, are both contained in the plane normal to the initial angular momentum vector, H A0 . Because the particle’s position and velocity vectors are contained in the same plane, the particle’s motion is contained entirely in the plane normal to the angular momentum vector. This result is quite general: if a particle is subjected to forces with a line of action passing through a ſxed inertial point, its trajectory is contained in the plane normal to the initial angular momentum vector. In particular, if a particle is subjected to a central force, its trajectory lies in the plane normal to the initial angular momentum vector. In the present example, the force associated with the elastic spring is a central force, whereas that associated with the dashpot is not. The solution of the problem is now considerably simpliſed. Without loss generality, axis ¯ı3 is selected to be along H A0 and hence, φ = π/2, φ˙ = 0, v 0 = r˙0¯ı1 + r0 θ˙0¯ı2 , and H A0 = mr02 θ˙0¯ı3 . The constancy of the angular momentum then ˙ ı3 = mr2 θ˙0¯ı3 , or r2 θ˙ = r2 θ˙0 . The ſrst equation of motion now implies H A = mr2 θ¯ 0 0 becomes m(¨ r −rθ˙2 ) = −k(r−r0 )−cr, ˙ whereas the last two are identically satisſed. It is convenient to introduce the following parameters: Ω = k/m, the frequency of the spring mass system, ζ = cm/(2Ω), the damping ratio of the dashpot and τ = Ωt, the non-dimensional time. The equations of motion then reduce to r − rθ2 = −(r − r0 ) − 2ζr , and 2 r θ = r02 θ0 , where notation (·) indicates a derivative with respect to τ . Finally, the non-dimensional position of the particle is introduced, r¯ = r/r0 , and the equations of motion simply become r¯ = θ02 /¯ r3 − (¯ r − 1) − 2ζ r¯ and θ = θ0 /¯ r2 , respectively; T the initial conditions are r¯(t = 0) = 1, r¯ (t = 0) = (¯ı1 v 0 )/(Ωr0 ), and θ0 = (¯ıT2 v 0 )/(Ωr0 ). Example 3.3. Particle sliding on a helix Consider the motion of a particle sliding without friction along the helix depicted in ſg. 2.3. Gravity acts down, in the opposite direction of axis ¯ı3 . Since the particle is
78
3 Basic principles
constrained to move along the helix, a constraint force is applied to the particle. This force acts in the plane normal to the curve, i.e., it has components along the normal and binormal vectors, but not along the tangent vector. Newton’s second law then implies −mg¯ı3 + Fn n ¯ + Fb¯b = m(¨ st¯ +
s˙ 2 n ¯ ), ρ
where Fn and Fb are the components of the reaction force in the normal and binormal directions, respectively, and the components of the acceleration vector are expressed in terms of path coordinates, eq. (2.34). The application of Newton’s second law requires the consideration of all externally applied forces acting on the particle, including the reaction forces. Projecting this equation along the tangent direction and using eq. (2.25) yields kg s¨ = −g t¯T ¯ı3 = − √ , a2 + k 2 The√particle slides down the helix acted upon by an “apparent gravity,” kg/ a2 + k 2 . The equation of motion is expressed in terms of the curvilinear coordinate s; it can be readily modiſed to be expressed in terms of parameter √ η deſned in ſg.√ 2.3. Indeed, using the results established in example 2.1, s˙ = η˙ a2 + k 2 and s¨ = η¨ a2 + k 2 . It follows that η¨ = −kg/(a2 + k 2 ). Projecting Newton’s law along the normal and binormal vectors yields Fn =
mas˙ 2 , a2 + k 2
mga Fb = √ , a2 + k 2
respectively. The normal component of the constraint force stems from the normal component of acceleration. Because the component of acceleration in the binormal direction vanishes, the corresponding component of the constraint force is solely due to the gravity component in that direction. Example 3.4. Particle sliding on a spherical surface Consider the motion of a particle sliding on the spherical surface depicted in ſg. 2.10. Gravity acts down, in the opposite direction of axis ¯ı3 . Since the particle is constrained to move on the spherical surface, a constraint force is applied to the particle. This force acts in the direction normal to the surface, i.e., it has a single component along the surface normal. Using the surface coordinates introduced in section 2.5 for a sphere, see example 2.4, Newton’s second law states that s˙ 2 s˙ 1 s˙ 2 s˙ 2 + s˙ 22 −mg¯ı3 + Fn n n ¯ , (3.45) ¯ = m (¨ s1 − 2 )¯ e1 + (¨ s2 + )¯ e2 − 1 T2 T2 R where Fn is the magnitude of the reaction force in the normal direction. For a sphere, the following results were derived in example 2.4, 1/R1 = 1/R2 = −1/R and
3.2 Conservative forces
79
1/T1 = 0. Projecting this equation along unit vectors e¯1 and e¯2 yields s¨1 − s˙ 22 /T2 = g sin η1 and s¨2 + s˙ 1 s˙ 2 /T2 = 0, respectively. The equations of motion are expressed in terms of the curvilinear coordinates, s1 and s2 , but can be readily modiſed to be expressed in terms of the surface coordinates η1 and η2 . Indeed, s˙ 1 = Rη˙ 1 and s˙ 2 = Rη˙ 2 sin η1 . Introducing the expression for the twist of the spherical surface, eq. (2.66), then yields η¨1 − η˙22 sin η1 cos η1 =
g sin η1 , R
η¨2 sin η1 + 2η˙ 1 η˙ 2 cos η1 = 0.
Projecting Newton’s law along the normal vector yields s˙ 21 + s˙ 22 . Fn = m g cos η1 − R
(3.46)
(3.47)
The magnitude of the constraint force stems from the normal component of acceleration and from the component of the gravity force in that direction. For small motions of the particle near the lowest point on the sphere, i.e for η1 = π + ηˆ1 , ηˆ1 1. The equations of motion can be linearized as η¨ ˆ1 + g ηˆ1 /R = 0, the well known equation governing the small amplitude motion of a pendulum under gravity. The same results could have been obtained using spherical coordinates, see section 2.7.2, instead of surface coordinates; the fact that the particle is moving on the surface of a sphere then implies r˙ = 0. 3.2.5 Problems Problem 3.1. Simple spring mass system Consider a simple spring mass system: a particle of mass m is connected to a spring of stiffness k and a gravity ſeld with an acceleration g is acting on the system. At time t0 , the system is at rest and the spring is un-stretched. Consider the following two scenarios. Scenario 1: the mass is released from rest and oscillates freely thereafter. Scenario 2: the mass is slowly brought to its static equilibrium position. (1) Find the maximum displacement of the particle for scenario 1. (2) Find the maximum displacement of the particle for scenario 2. (3) If there exist any difference in the maximum displacements for scenarios 1 and 2, give work and energy arguments to justify the discrepancy.
Problem 3.2. Work done by conservative forces Prove that the work done by a conservative force applied to a particle between times ti and tf is independent of the path of the particle during that time.
Problem 3.3. Is a constant force a conservative force? Is a constant force a conservative force? If yes, ſnd the potential of this force.
Problem 3.4. Particle subjected to friction forces Consider a particle of mass m = 1 kg subjected to a friction force F f = −kvv, where k is the friction coefſcient and v = v. The particle is also subjected to gravity forces (g = 9.81 m/s2 ), see ſg. 3.15. At time t = 0, the particle is launched with an initial speed v0 = 100 m/s with an angle θ = 30 deg with respect to the horizontal. (1) Write the equations of motion for
80
3 Basic principles
the particle. (2) Solve these equations for k = 0, 0.001, and 0.002 kg/m. (3) Plot the trajectory of the particle for the three cases on the same graph. (4) Determine the distance d and the maximum height h from the computed trajectory. (5) Plot d and h as a function of the friction coefſcient k ∈ [0, 0.003] kg/m.
i2
i2 v0
Fd q
m g
x g
h i1
O W
d Fig. 3.15. Particle subjected to friction.
c
m k
f i1
Fig. 3.16. Particle in a slot on a rotating disk.
Problem 3.5. Particle in a slot on a rotating disk
Figure 3.16 depicts a disk rotating in a vertical plane at a constant angular speed, φ˙ = Ω, around inertial point O. Mass m is free to slide in a radial slot on the disk and is connected to the center of the disk by means of a spring of stiffness constant k and a dashpot of constant c. The system is subjected to gravity and a torque, Q, is applied to the disk. The spring’s unstretched length is denoted x0 . (1) Derive the equation of motion of the system in terms of distance x from point O to the particle. (2) Find the horizontal and vertical components of the reaction force at point O. (3) Find the applied torque, Q, required to maintain this constant angular speed.
Problem 3.6. Free falling parachute Figure 3.17 shows a payload of mass m = 120 kg attached to a parachute. The payload is dropped from an altitude h = 1000 m with a horizontal velocity of magnitude v0 = 100 m/s. The payload is subjected to a drag force F d = −1/2 Cd ρA vv, where Cd = 1.42 is the drag coefſcient, ρ = 1.23 kg/m3 the air density, A = πD2 /4 the cross-sectional area of the parachute, and D its diameter. The velocity vector is denoted v and the speed is v = v. The payload is also subjected to gravity forces (g = 9.81 m/s2 ), see ſg. 3.17. (1) Write the equations of motion for the payload. (2) Solve these equations numerically for parachutes of diameter D = 3, 4, and 6 m. (3) Plot the horizontal position of the payload for the three cases on the same graph. (4) Plot the vertical position of the payload for the three cases on the same graph. (5) Plot the horizontal velocity of the payload for the three cases on the same graph. (6) Plot the vertical velocity of the payload for the three cases on the same graph. (7) Find an analytical expression for the constant horizontal velocity that is eventually reached by the payload. (8) Find an analytical expression for the constant vertical velocity that is eventually reached by the payload. (9) Based on this constant vertical velocity, ſnd an analytical expression for the time it takes for the payload to reach the ground. (10) Compute the time to reach the ground as a function of parachute diameter D ∈ [3, 6] m. On the same graph, plot the numerical and analytical solutions. (11) Compute the ſnal vertical velocity as a function of parachute diameter D ∈ [3, 6] m. On the same graph, plot the numerical and analytical solutions
Problem 3.7. Pendulum under gravity forces Consider a pendulum with a bob of mass m = 1.5 kg, length = 0.75 m and subjected to gravity forces (g = 9.81 m/s2 ). The pendulum is released from rest with θ = 0, see ſg. 3.18.
3.2 Conservative forces
81
v0
i2
Fd
i1 q
m
h
g g
i1
m i2
d Fig. 3.17. Parachute subject to drag force.
Fig. 3.18. Pendulum under gravity forces.
(1) Write the equations of motion for the pendulum. (2) Solve these equations numerically. (3)Plot the angular motion θ and angular velocity θ˙ as functions of time on two separate graphs. (4) Compute and plot the tension in the cord as a function of time. (5) On one graph, plot the kinetic energy, potential energy, and total mechanical energy of the system versus time. (6) Plot the total mechanical energy of the system versus time. Does it remain constant? Comment on your results
Problem 3.8. Inverted pendulum Consider an inverted pendulum with a bob of mass m = 1 kg. A massless, rigid bar of length = 1 m supports the bob. Gravity, g = 9.81 m/s2 , acts in the direction indicated on ſg. 3.19. A torsional spring of stiffness k = 10 N·m/rad is located at point O and applies a moment M = −kθ on the rigid bar. The pendulum is released from θ = 0, with an initial speed v0 = 2 m/s to the right, see ſg. 3.19. (1) Write the equations of motion for the system. (2) Solve these equations numerically. (3) Plot the angular motion θ as a function of time. (4) Plot the angular velocity θ˙ as a function of time. (5) Plot the load in the rigid bar as a function of time. (6) On one graph, plot the kinetic energy, potential energy, strain energy, and total mechanical energy of the system versus time. (7) On one graph, plot the total mechanical energy of the system versus time. Does it remain constant? Comment on your results. (8) Consider two states ot the system: the initial conſguration, (θ = 0), and a ſnal conſguration, (θ = θf ), where the angle θf is maximum. Find the maximum angular deƀection, θf . Check your answer against the numerical simulation.
i2 q l k O
m
Present configuration
i2 r c
q v0
k m
g i1
O r0
Fig. 3.19. Inverted pendulum under gravity forces.
i1 Initial configuration
Fig. 3.20. Particle connected to the ground by a spring and damper.
82
3 Basic principles
Problem 3.9. Particle connected to the ground with spring and damper A particle of mass m is connected to the ground by a spring of stiffness k and a damper of constant c. The initial conſguration of the system is indicated on ſg. 3.20, and the initial velocity vector is v 0 . The following quantities are deſned: Ω 2 = k/m and c = 2mΩζ. For this problem, it is convenient to use the polar coordinate system indicated on the ſgure. (1) Set up the equations of motion of the system. (2) Plot r¯ = r/r0 as a function of the nondimensional time τ = Ωt for τ ∈ [0, 20π]. (3) Plot θ(τ ). (4) Plot the trajectory of the particle ˙ ¯ ) = θ/Ω. in space. (5) Plot the history of the non-dimensional angular velocity Ω(τ (6) Plot the history of the components of the velocity vector in the inertial frame, v¯x = vx /(Ωr0 ) and v¯y = vy /(Ωr0 ). (7) Plot the history of the non-dimensional total mechanical energy of ¯ ) = E/(mΩ 2 r02 ); comment your result. (8) Compute the non-dimensional the system E(τ ¯ (τ ) = W/(mΩ 2 r02 ). (9) Plot the history of cumulative energy dissipated in the damper W ¯ )+W ¯ (τ ); comment your result. Use the following data: ζ = 0.05; at time the quantity E(τ τ = 0, v 0 /(Ωr0 ) = 1.2 ¯ı1 + 0.8 ¯ı2 , θ0 = 0 and r(t = 0)/r0 = 1; the un-stretched length of the spring is r0 .
Problem 3.10. Particle sliding along a curve A particle of mass m freely slides along a given curve C in three-dimensional space. A point on the curve has a position vector p0 (s). Find the equation of motion for the particle if it is subjected to externally applied forces F (t). What are the components of the constraint force acting on the particle.
Problem 3.11. Particle sliding along a helix A particle slides along a helix and is subjected to a gravity force acting along the ¯ı1 direction, see ſg. 2.3. Find the equation of motion for the particle in terms of the parameter η. If the √ initial condition at t = 0 are η = 0 and η˙ = v0 / a2 + k2 , ſnd the minimum value of v0 such that the particle proceeds along the helix with η˙ > 0 at all time.
Problem 3.12. Particle sliding along a circular ring Figure 3.21 depicts a particle of mass m sliding along a circular ring under the effect of gravity. The ring rotates on two bearing about an axis parallel to ¯ı3 ; a torque Q(t), acting about axis ¯ı3 , is applied to the ring. (1) Find the equations of motion for the particle. (2) Write the expression for the potential of the gravity forces. (3) Write the expression for the kinetic energy of the particle. (4) Write the expression for the work done by the applied torque Q(t).
Problem 3.13. Particle sliding along a circular ring Figure 3.21 depicts a particle of mass m sliding along a circular ring under the effect of gravity. The ring rotates on two bearing about an axis parallel to ¯ı3 ; a torque Q(t), acting about axis ¯ı3 , is applied to the ring. (1) Find the equations of motion for the particle based on the principle of impulse and momentum.
Problem 3.14. Particle in a massless tube Figure 3.22 shows a particle of mass m sliding in a massless tube is connected to a spring of stiffness kr and a damper of constant cr . The un-stretched length of the spring is r0 . A spherical coordinate system r, φ and θ with corresponding unit vectors e¯1 , e¯2 and e¯3 will be convenient to use. The spring/damper assembly is attached to the ground at point A by means of a joint that allows rotation about axis e¯3 . This joint features a torsional spring of stiffness kφ and a torsional damper of constant cφ . The torsional spring is un-stretched when φ = π/2. The angle θ has a prescribed schedule θ(t) = ωt. The following quantities are deſned: the non-dimensional time τ = ωt, the axial spring frequency Ωr = kr /m, and
3.2 Conservative forces
i3
i3
kf cf
Q(t)
g f
kr r i2
e3 m
O I
q
i2 e2
i1
i1
Fig. 3.21. Particle sliding on a circular ring.
f cr
A
m
r I
83
q
e1
Fig. 3.22. Particle connected to the ground by a spring, damper and revolute joint.
its critical damping ratio ζr = cr /(2mΩr ), the torsional spring frequency Ωφ = kφ /mr02 2 and its critical damping ratio ζφ = cφ /(2mr0 Ωφ ). (1) Set up the equations of motion of the system. (2) Plot r¯ = r/r0 as a function of the non-dimensional time τ ∈ [0, 20π]. (3) Plot φ(τ ). (4) Plot the trajectory of the particle in three-dimensional space. (5) Plot the history of the non-dimensional force F¯3 = F3 /(mr0 ω 2 ) that the massless tube applies on the particle. (6) Plot the history of the non-dimensional total mechanical energy of the sys¯ ) = E/(mr02 ω 2 ); comment your result. (7) Plot the history of the cumulative nontem E(τ ¯ d (τ ) = W d /(mr02 ω 2 ). (8) Plot the history dimensional energy dissipated in the dampers W ¯ M = W M /(mr02 ω 2 ) done by the torque required to of cumulative non-dimensional work W ¯ )+W ¯ d (τ ) − W ¯ M (τ ); comment prescribe θ(t) = ωt. (9) Plot the history of the quantity E(τ ¯ ¯ your result. Use the following data: Ωr = Ωr /ω = 5, ζr = 0.05; Ωφ = Ωφ /ω = 1.5, ζφ = 0.05; at time τ = 0, v 0 /(ωr0 ) = 0.6 ¯ı1 + 1 ¯ı2 + 0.75 ¯ı3 , φ0 = π/2 and r/r0 = 1.
Problem 3.15. Particle moving on a track Figure 3.23 shows particle of mass m moving on a track deſned by a curve C while constrained to remain within a slot inside a massless arm. The massless arm is prescribed to move at a constant angular speed, θ˙ = Ω. (1) Plot the radial location, r/R, of the particle as a function of θ. (2) Plot the moment m ¯ = M/(mR2 Ω 2 ) necessary to drive the system at a constant angular speed. (3) Plot the non-dimensional normal force F¯n = Fn /(mRΩ 2 ) the curved track applies on the particle. (4) Determine the minimum stiffness of the spring, ¯ for which the particle remains on the track i.e., the minimum non-dimensional frequency Ω, at all times. The curve is deſned in the polar coordinate system as p0 (θ) = r(θ)¯ e1 , where r(θ) = R − b cos N θ. It will be convenient to deſne the normal to the curve as n ¯ = ı3 t¯, where t¯ is the tangent to the curve. Use the following data: ¯b = b/R = 0.25; N = 6; ¯ = ω/Ω = 3. The spring is un-stretched when r = 0. At time t = 0, θ = 0. ω 2 = k/m; Ω
Problem 3.16. Particle moving on a track Figure 3.23 shows particle of mass m moving on a track deſned by a curve C while constrained to remain within a slot inside a massless arm. A moment, M , is applied to the arm ˙ at point O. (1) Plot the time history of the angle θ. (2) Plot the angular speed θ/ω. (3) Plot the normal force F¯n = Fn /(mRω 2 ) the curved track applies on the particle. (4) Plot the ¯ = E/(mR2 ω 2 ). Discuss your results. (5) Comtotal mechanical energy of the system, E ¯ 0 = 0.75 and 0.80. Explain your results. The curve pare the responses of the system at M
84
3 Basic principles
e1 , where r(θ) = R − b cos N θ. is deſned in the polar coordinate system as p0 (θ) = r(θ)¯ It will be convenient to deſne the normal to the curve as n ¯ = ı3 t¯, where t¯ is the tangent to the curve. Use the following data: ¯b = b/R = 0.25; N = 6; ω 2 = k/m. The spring is un-stretched when r = 0. At time t = 0, θ = 0 and θ˙ = 0. The applied moment is given as ¯ = M/(mR2 ω 2 ) = M ¯ 0 (1 − cos τ ) for τ ≤ 2π and m M ¯ = 0 for τ > 2π, where τ = ωt is ¯ 0 = 0.75. Simulate the system for τ ∈ [0, 6π]. the non-dimensional time and M
i2 e1
k m
C
A
r
h q
e2 O
i1
Fig. 3.23. Particle moving on a track.
i2 g k I O
m
i1
Fig. 3.24. Particle connected to a spring with unilateral contact to a horizontal plane.
Problem 3.17. Particle with unilateral contact The particle of mass m depicted in ſg. 3.24 is subjected to a gravity ſeld of acceleration g and is connected to a spring of stiffness k and un-stretched length h. The spring is attached to inertial point A, located a distance h above point O. A unilateral contact condition is imposed on the particle by the horizontal plane P = (O, ¯ı2 ); this means that the particle can only move in the half-space above this plane. At the initial time, the particle is at point O and has a velocity v(t = 0) = v0¯ı1 . (1) Write the equation of motion for the particle while it is in contact with the plane. (2) Plot the non-dimensional position of the particle as a function of nondimensional time. (3) Plot the non-dimensional velocity of the particle as a function of nondimensional time. (4) Find the time at which the particle leaves the plane and its corresponding position and velocity. (5) Under what condition will the particle always remain on the plane for any magnitude of the initial velocity v0 ? (6) Find the time at which the particle will ſrst hit the plane after leaving it. (7) Plot the trajectory of the particle during its free ƀight. Use the following data: v¯0 = v0 /(ωh) = 1; g¯ = mg/(kh) = 0.25; ω 2 = k/m. Use the following non-dimensional time τ = ωt. All lengths are non-dimensionalized by h, velocities by ωh.
Problem 3.18. Particle moving on a parabolic surface of revolution Figure 2.11 shows a particle sliding on a parabolic surface of revolution and subjected to a gravity force acting along the negative ¯ı3 direction. This surface is deſned by the position vector of one of its points, p0 = r cos φ ¯ı1 +r sin φ ¯ı2 +ar 2¯ı3 , where r ≥ 0 and 0 ≤ φ ≤ 2π. The following notation was used η1 = r and η2 = φ. (1) Find the equation of motion for the particle in terms of the surface coordinates r and φ. (2) Find the constraint force acting on the particle.
Problem 3.19. Particle sliding on a linear spiral A particle of mass m is sliding along a linear spiral, as deſned in example 2.2, under the effect of gravity acting down along the ¯ı2 axis, see ſg. 2.4. (1) Derive the governing equation of motion using Newton’s law. (2) Plot the angle θ as a function of time. (3) Plot the θ˙ as a function of time. (4) Plot the time history of the magnitude of the normal reaction force that the spiral applies to the particle. (5) On one graph, plot the time history of the kinetic energy
3.3 Contact forces
85
of the particle, its potential energy, and its total mechanical energy. (6) Derive the governing equation of motion of the particle from the principle of work and energy. Use the following data: m = 2.5 kg; a = 0.2 m; g = 9.81 m/s2 . At time t = 0, θ = 0 and θ˙ = 50 rad/s. Present all your results for t ∈ [0, 15] s.
Problem 3.20. Bungee jumping A man of mass m is jumping off a bridge while attached to a bungee cord of un-stretched length d0 , as described in example 3.1. An inertial frame, F = [O, I = (¯ı1 , ¯ı2 )], is attached to the bridge. The man is jumping from point O with an initial velocity, v0 , oriented along horizontal axis ¯ı2 , and the acceleration of gravity is acting along vertical axis ¯ı1 . In the developments presented in example 3.1, the effect of air friction on the man was ignored. In this problem, these forces will be taken into account in an approximate manner applying to the man a drag force, F d = −1/2 Cd ρA vv, where Cd is the non-dimensional drag coefſcient, ρ the air density, and A the man’s cross-sectional area. This drag force is at all times proportional to the square of the speed, aligned with the velocity vector, and oriented in the direction opposite to the velocity vector. (1) Derive the equation of motion for the free fall portion of the man’s trajectory. Solve the equations numerically to ſnd the time τt at which the bungee becomes taught. (2) Derive the equations of motion once the bungee is taut. Solve the equations numerically. (3) On one graph, plot the components x ¯1 and x ¯2 of the man’s position vector as functions of τ . (4) Plot the trajectory of the man. (5) On one graph, plot the components v¯1 and v¯2 of the velocity vector as functions of τ . (6) Plot the stretch of the bungee as a function of τ . (7) On one graph, plot the non-dimensional kinetic energy, ¯ = K/(mv02 ), potential energy, V¯ = V /(mv02 ), and total potential energy E ¯ =K ¯ + V¯ . K (8) Determine the non-dimensional time at which the bungee becomes slack again. Use the ¯2 = x2 /d0 ; v¯1 = v1 /v0 , v¯2 = v2 /v0 ; following non-dimensional quantities: x ¯1 = x1 /d0 , x use the non-dimensional time τ = v0 t/d0 . Use the following data: g¯ = gd0 /v02 = 10, ¯0 = k0 d20 /(mv02 ) = 60, Cd = 0.47 and μ ¯ = ρAd0 /m = 0.03. Present all your results for k τ ∈ [0, 3.5τt ].
3.3 Contact forces When dealing with particle dynamics, it is often the case that the particle is in contact with another body. Contact can be of a continuous nature; for instance, a particle is moving while in continuous contact with a curve or a surface, see example 3.3 or 3.4, respectively. Contact could also be of an intermittent nature, such as, for instance, the impact of a particle on an obstacle. These contact forces are forces acting on the particle, which must therefore be included in the statement of Newton’s second law when studying the dynamic response of the particle. Both magnitude and direction of these forces must be studied to properly state Newton’s second law. The kinematics of contact of a particle with a surface and a curve will be studied ſrst in sections 3.3.1 and 3.3.2, respectively; contact forces are categorized into normal and tangential contact forces. Next, the magnitudes of these forces will be studied in section 3.3.3. Typically, constitutive laws are postulated that relate the magnitude of the contact forces to contact parameters. For instance, Coulomb’s friction law relates the friction force to both normal force and relative velocity of the particle with respect to surface it is in contact with.
86
3 Basic principles
3.3.1 Kinematics of particles in contact with a surface Figure 3.25 depicts a particle of mass m in continuous contact with surface S at point P. The differential geometry of a surface was studied in details in section 2.4, and it is assumed here that parameters η1 and η2 deſne the lines of curvature presented section 2.4.5. Unit vectors e¯1 and e¯2 given by eq. (2.55) deſne the plane tangent to the surface at point P. The normal to the surface is now deſned as n ¯ = e1 e¯2 and E = (¯ e1 , e¯2 , n ¯ ) forms an orthonormal basis. n
n S
e2 h2
P
F Tangent plane
n
Fn
e2 F2t
e1
F2t F1t
h1
Surface’s free body diagram
e1
m F1t Particle’s free body diagram
Fig. 3.25. Particle moving on a surface.
The contact force, F c , between the particle and the surface is conveniently divided into two components, the normal contact force, F n = F n n ¯ , which acts along the normal to the surface, and the tangential contact force, F t = F1t e¯1 +F2t e¯2 , which acts in the plane tangent to the surface. Hence, the contact force is written as F c = F n + F t = F nn ¯ + (F1t e¯1 + F2t e¯2 ).
(3.48)
Imagine ſrst that the particle slides over the surface without any friction: the tangential contact forces vanish in eq. (3.48). Further assume that the surface on which the particle slides is a plane. If the particle slides on this plane under the effect of externally applied forces acting in the same plane, F a = F1a e¯1 +F2a e¯2 , the normal contact force also vanishes. Indeed, Newton’s law now reduces to F1a e¯1 + F2a e¯2 + 0¯ n = m(¨ x1 e¯1 + x ¨2 e¯2 + 0¯ n): both externally applied forces and accelerations vanish along the normal direction. Consider now the same particle sliding on a curved surface under the effect of external forces applied in the plane tangent to the surface; Newton’s law now becomes F1a e¯1 + F2a e¯2 + F n n ¯ = m(a1 e¯1 + a2 e¯2 + an n ¯ ), where the acceleration components are given by eq. (2.68). Since the particle has to follow the curvature of the surface, the acceleration component in the normal direction, an , does not vanish, and the normal contact force, F n , is necessary to equilibrate the corresponding inertial forces. The normal contact force can be interpreted as the constraint force that constrains the particle to remain on the surface. If the interface between the particle and the surface is rough, friction forces acting in the plane tangent to the surface will appear in addition to the normal contact
3.3 Contact forces
87
force. Figure 3.25 also gives free body diagrams for the particle and surface. Force components F n , F1t , and F2t are the forces the surface applies to the particle. Note that according to Newton’s third law, the particle applies equal and opposite forces to the surface. 3.3.2 Kinematics of particles in contact with a curve Figure 3.26 shows a common situation where a particle moves along a curve. This would be, for instance, the case of a train moving along its rails, or of a roller coaster car moving along its track. The differential geometry of a curve was studied in details in section 2.2. At point P of the curve, it is possible to deſne Frenet’s triad consisting of the tangent, normal, and binormal vectors, denoted t¯, n ¯ , and ¯b, respectively. b
b s
b
P m
F
Fb m
t
F
n
F
t n C
n
t
F
n
F Curve’s free body diagram
t
Particle’s free body diagram
Fig. 3.26. Particle moving on a curve.
The contact force, F c , between the particle and the curve is conveniently divided into two components, the normal contact force, F n = F n n ¯ + F b¯b, which acts in the plane normal to the curve, and the tangential contact force, F t = F t t¯, which acts along the tangent to the curve. Hence, the contact force is written as F c = F t t¯ + (F n n ¯ + F b¯b).
(3.49)
Note the different expressions for the contact forces between a particle and a surface, eq. (3.48), and those between a particle and a curve, eq. (3.49). For a surface, the normal contact force has a single component along the normal to the surface, whereas for a curve, the normal contact force has two components along the normal and binormal to the curve. On the other hand, for a surface, the tangential contact force has two components in the plane tangent to the surface, whereas for a curve, the tangential contact force has a single component along the tangent to the curve. It is important to distinguish the difference between unilateral and bilateral contact. For instance, a train is in unilateral contact with its rails: the train cannot go through the rails, nothing, however, prevents the train from moving off the rails in the upward direction. Of course, gravity forces are, in general, sufſcient to keep the train on its rails. This contrasts with roller coasters: in this case, cars are connected to the track by a set of wheels that prevent them from running off track in any direction.
88
3 Basic principles
When dealing with unilateral contact, it is often important to determine when a particle will loose contact with the surface or curve. Consider, at ſrst, the case of a particle on a surface and assume the particle can freely move in the direction of the normal to the surface. In that case, F n is positive when the particle is on the surface and the unilateral contact condition cannot support a negative normal force. Clearly, the particle is about to leave the surface when F n = 0. In the case of a particle on a curve, the normal to the curve is always pointing to the concave side of the curve: the normal ƀips direction at an inƀection point of the curve. Due to this discontinuity, the condition F n = 0 must be applied with care when dealing with particle moving along a curve. For more details about the complex problems associated with unilateral contact conditions can be found in the textbook by Pfeiffer [6]. 3.3.3 Constitutive laws for tangential contact forces The tangential contact forces are friction forces between the particle and surface or curve it moves on. Coulomb’s friction law is commonly used to evaluate the friction forces, and sometimes, friction forces are assumed to be of a viscous type. Coulomb’s friction law Coulomb’s friction law has been extensively used to model friction forces. It postulates that the friction force between the particle and surface is proportional to the absolute value of the normal contact force. The empirical coefſcient of proportion0.4 ality, μk , is called the coefſcient of kinetic 0.3 m friction. The friction force always acts in 0.2 the direction opposing the relative velocity 0.1 of the particle with respect to the surface, FRICTION FORCE [N]
k
0
v0
F f = −μk F n
-0.1 -0.2
v rel , v rel
(3.50)
where v rel is the relative velocity of the particle with respect to the surface and RELATIVE VELOCITY [m/s] F n = |F n |, see eq. (3.48). Fig. 3.27. Coulomb’s friction law: solid In the case of a particle moving along line; continuous friction law: dashed line. a curve, the relative velocity of the particle with respect to the curve is along the tangent to the curve, i.e., F f = F f t¯, where -mk
-0.3
-0.4 -5
-4
-3
-2
-1
0
1
2
3
4
5
F f = −μk F n sign(vrel ),
(3.51)
where vrel is the speed of the particle with respect to the curve, v rel = vrel t¯, and F n 2 = F n2 + F b2 , see eq. (3.49). Sliding gives way to sticking when the relative velocity vanishes. In that case, the magnitude of the friction force must be smaller than that of the normal contact force times an empirical coefſcient μs , the coefſcient of static friction, or
3.3 Contact forces
F f ≤ μs F n .
89
(3.52)
Figure 3.27 depicts the friction force as a function of the relative velocity, for the simple case of a constant friction coefſcient μk = 0.3 and unit normal force F n = 1. Coulomb’s friction law presents a discontinuity of the friction force at zero relative velocity, as shown in ſg. 3.27. This discontinuity causes numerical difſculties in computer simulations and hence, various approximations to Coulomb’s law have been proposed in the literature [7, 8, 9, 10, 11]. These various approximations can be viewed as continuous friction laws that replace the discontinuity at zero relative velocity by a smooth, rapidly varying function of the relative velocity. A typical expression for continuous friction laws is F f = −μk F n sign(vrel ) (1 − e−|vrel |/v0 ),
(3.53)
where v0 is a characteristic relative velocity typically chosen to be small compared to the maximum relative velocity encountered during the simulation. Figure 3.27 shows the friction force corresponding to the continuous friction law for v0 = 0.5 m/s. The continuous friction law replaces both kinetic and static friction laws. Viscous friction law It is sometimes assumed that friction forces are of a viscous type, i.e., the friction forces are proportional to the relative velocity of the particle with respect to the surface or curve it moves on. The coefſcient of proportionality, c, is called the coefſcient of viscous friction, and hence F f = −cv rel . (3.54) Note that the normal force does not appear in this expression. Coulomb’s friction is sometimes called “dry friction,” as opposed to the present “viscous friction” phenomenon. For cases of friction between a particle and a lubricated surface, a combination of dry and viscous frictions forces is often observed. Both dry and viscous friction laws are approximations to the experimentally observed friction forces. In fact, friction is a very complex phenomenon that involves many, often poorly understood physical processes; the following references give detailed descriptions of the friction process and a wealth of experimental observations Rabinowicz [12], or Oden and Martins [13]. Example 3.5. Particle elastically suspended to a straight track Consider a particle of mass m suspended to a straight track by means of a spring in parallel with a dashpot of constant c, as depicted in ſg. 3.28. The magnitude of the force in the spring, Fs , is a nonlinear function of its stretch, Fs = k1 Δ + k3 Δ3 , where Δ = r − r0 is the stretch of the spring, r the distance from the particle to point A, and r0 the un-stretched length of the spring. The spring-dashpot system is connected at point A to a massless slider that moves along a straight track, which makes an angle α with respect to the horizontal. The motion of the slider along the track is prescribed as s(t) = s0 sin ωt. Considering
90
3 Basic principles
i2
e2 A
g
e1
e2 D
s(t) I
e1
c
F
a
c i1
O x
k
r
- Fsd Fsd
u m
-mg i2 m
Fig. 3.28. Particle on a straight track.
the free body diagram for the particle illustrated on the right portion of ſg. 3.28, the equation of motion of the system is found as −mg¯ı2 + F sd = m¨ x,
where xT = x1 , x2 are the components of the position vector of the particle resolved in the inertial frame F I = [O, I = (¯ı1 , ¯ı2 )], and F sd those of the the force vector applied to the particle by the spring-dashpot system. The force in the spring-dashpot system has a line of action that joins the particle to point A; the unit vector along this line of action is u¯ = [s(t)¯ e1 − x]/r, where r = s(t)¯ e1 − x and e¯1 = cos α ¯ı1 + sin α ¯ı2 is the unit vector along the track. The force vector generated by the spring-dashpot system is now readily expressed as ˙ u¯, where Δ˙ = r˙ = u F sd = [k1 Δ + k3 Δ3 + cΔ] ¯T (s¯ ˙ e1 − x) ˙ is the stretch rate, i.e., the projection of the relative velocity of the two ends of the dashpot, (s¯ ˙ e1 − x), ˙ along unit vector u ¯ pointing from one end of the damper to the other. Because the time history of the slider motion is given, the equation of motion for the particle can be integrated numerically to yield the response of the system. The following physical parameters are used: α = π/6; s0 = 0.45 m; ω = 2 rad/s; m = 1.5 kg; r0 = 0.25 m; k1 = 50 N/m, k3 = 20 kN/m3 ; c = 2.6 N·s/m; and 2 g = 9.81
m/s . At the initial time, the particle is at rest at the following position: T x = 0, −r0 . Figure 3.29 shows the inertial position and velocity of the particle as a function of time. The spring stretch and force, and the damper stretch rate and force are depicted in ſg. 3.31 and 3.32, respectively. The kinetic energy of the system is readily evaluated as K = 1/2 m x˙ T x. ˙ The potential energy of the system consists of two terms, the potential of the gravity forces, mgx2 , and the strain energy in the spring, leading to 1 1 V = mgx2 + k1 Δ2 + k3 Δ4 . 2 4 The second term of the strain energy expression, 1/4 k3 Δ4 , is associated with the nonlinear force term in the spring, k3 Δ3 . Figure 3.30 shows the time histories of the kinetic, potential and total mechanical energies of the system. As expected, the total mechanical energy does not remain constant, because the present system is not conservative.
3.3 Contact forces 4
2 0
SYSTEM ENERGIES [J]
x1 and x2
1
-1
v1 and v2
2
0
0
-2
-4
-6
-2 0
2
4
6
8
10
-8 0
TIME [s]
2
4
6
8
10
TIME [s]
Fig. 3.29. Top ſgure. Particle position: x1 , solid line and x2 , dashed line. Bottom ſgure. Particle velocity: v1 = x˙ 1 , solid line and v2 = x˙ 2 , dashed line.
Fig. 3.30. System energies: kinetic energy: (◦); potential energy: (+); total mechanical energy: ( ).
2
D [N]
dD/dt [m/s]
0.4
0.3
0
0.2
-2
60
5
40
Fd[N]
Fs [N]
91
0
20
0
0
2
4
6
8
10
TIME [s]
Fig. 3.31. Top plot: spring stretch, Δ. Bottom plot: spring force, Fs .
-5 0
2
4
TIME [s]
6
8
10
˙ Fig. 3.32. Top plot: damper stretch rate, Δ. Bottom plot: damper force, Fd .
To verify the energy closure condition for this system, the work done by two additional forces, the driving force and the damper force, must be brought into the picture. The statement of the problem speciſes that “The motion of the slider along the track is prescribed as s(t) = s0 sin ωt.” Clearly a driving force must be applied to the slider, if this desired motion is to be achieved. It is implicitly assumed that a device applies this force and is sufſciently powerful to instantaneously generate the required force that achieves the desired motion of the slider. The right portion of ſg. 3.28 shows the free body diagram for the slider, leading to the following equilibrium equation D¯ e1 + F c e¯2 − F sd = 0, where D(t) is the magnitude of the driving force acting along the direction of axis e¯1 , and F c the magnitude of the force that the track applies to the slider along the direction normal to the track, e¯2 . Because the slider is massless, the right-hand side of the equation vanishes, leading to a static equilibrium condition.
92
3 Basic principles
Pre-multiplying this equation by e¯T1 yields the magnitude of the driving force: D = e¯T1 F sd . The cumulative work done by this force is now found as %
%
t
WD =
(D¯ e1 ) (ds¯ e1 ) = 0
%
t
T
Ds˙ dt = 0
0
t
(¯ eT1 F sd )s˙ dt.
Figure. 3.33 shows the history of the required driving force together with the work it performs.
5
20
Fd [N]
D [N]
40
0
-20
-5 0
Wnc [J]
WD [J]
5
0
-5
0
0
2
4
6
8
10
-0.5
-1 -1.5 0
2
4
6
8
10
TIME [s]
TIME [s]
Fig. 3.33. Top plot: history of the driving force, D(t). Bottom plot: cumulative work done by the driving force, WD .
Fig. 3.34. Top plot: history of the damper force, Fd . Bottom plot: cumulative work done by the damper force, Wnc .
As discussed in section 3.2.3, the cumulative work done by the damper force is % t % t (−cΔ˙ u¯)T (¯ u dΔ) = − cΔ˙ 2 dt. Wnc = 0
0
This quantity represents the energy dissipated in the dashpot. Figure. 3.34 depicts the history of the damper force and the work it performs. As expected, this is a monotonically decreasing function of time, which represents the amount of energy dissipated in the damper in the form of heat. Finally, the energy closure equation for this problem writes E(t) − WD − Wnc = Ei . Figure 3.35 show the various quantities in this equation: the total mechanical energy, the work done by the driving force, and the energy dissipated in the damper. As expected, the sum of these three energies remains constant during the evolution of the system, expressing the energy closure equation. 3.3.4 Problems Problem 3.21. Particle sliding along a slot in a rotating disk Figure 3.36 shows a particle of mass m sliding along a slot in a rotating disk. The disk rotates at a constant angular velocity, Ω, while the time-dependent position of the particle along the slot
3.3 Contact forces
93
6
SYSTEM ENERGIES [J]
4
2
i2 0
x(t)
m
f = Wt
-2
O -4
i1
Q
-6
-8
0
2
4
6
8
10
TIME [s]
Fig. 3.35. Total mechanical energy (◦), work done by the driving force (2); energy dissipated in the damper (); energy closure equation ( ).
Fig. 3.36. Particle sliding along a slot in a rotating disk.
is prescribed as x(t). (1) Find the driving torque, Q(t), required to keep the angular velocity of the disk constant. (2) Find the driving force, F d , required to prescribe to position of the particle along the slot. (3) Assume now that a friction force, F f , acts between the particle and the slot; repeat questions (1) and (2).
Problem 3.22. Particle sliding along a helix with friction A particle slides along a helix as deſned by eq. (2.24) and is subjected to a gravity force see ſg. 2.3. The particle is also subjected to a friction force acting along the −¯ı3 direction, of magnitude Ff = μk Fn2 + Fb2 , where Fn and Fb are the components of the constraint force acting on the particle in the normal and binormal directions, respectively, and μk the kinetic coefſcient of friction. (1) Find the equation of motion for the particle. (2) Plot the time history of the particle curvilinear coordinate. (3) Plot the speed of the particle versus time. (4) Find an analytical expression for the limit velocity of the particle, i.e., the velocity reached by the particle after it has been sliding along the helix for a long time. (5) Find an analytical expression for the limit magnitude of the acceleration vector. (6) What condition must the satisſed by the kinetic coefſcient of friction is the particle does not remain stuck. Use the following parameters: non-dimensional time τ = a/g t; lengths are non-dimensionalized √ ¯ = k/a = 0.35, μk = 0.3. by a, velocities by ag, accelerations by g. k
Problem 3.23. Motion of a particle on a track Figure 3.37 depicts a particle sliding along a planar track under the effect of gravity forces. The constraint force between the particle and the track is unilateral, i.e., the particle cannot go through the track, but it can leave it moving upwards. (1) Find the condition that must be satisſed by the kinetic energy of the particle if it is about to leave the track. (2) Could this condition be satisſed at point A? or at point B? (3) If a friction force (friction coefſcient μ) is present between the particle and the track, what is the condition that must be satisſed by the kinetic energy of the particle if it is about to leave the track.
Problem 3.24. Particle on circular track The particle of mass m is sliding on a circular track under the effect of gravity forces, as depicted in ſg. 3.38. The particle is connected to ſxed point A by means of a spring of stiffness constant k in parallel with a dashpot of constant c. The spring has an un-stretched
94
3 Basic principles
i2 i2
q n A m
A
k
B p0(s) t O I
m
c
g
O
d
q
g i1
R
i1
Fig. 3.37. Particle sliding on a track under the effect of gravity.
Fig. 3.38. Particle on a circular track.
length Δ0 . A viscous friction force F f = μs˙ is acting between the particle and the track. (1) Derive the equation of motion of the system. (2) Plot angle θ as a function of time. (3) ˙ Plot the history of the angular rate θ = θ/ω. (4) Plot the history of the normal force, F c , c c ¯ the track applies on the particle, as F = F /(mRω 2 ). (5) Plot the non-dimensional ki¯ = K/(mR2 ω 2 ), potential energy, V¯ = V /(mR2 ω 2 ), energy dissipated in netic energy, K ¯ c = W c /(mR2 ω 2 ), and energy dissipated at the viscous friction interface, the damper, W ¯ f = W f /(mR2 ω 2 ). Verify that the energy closure equation is satisſed. Use the following W non-dimensional quantities: non-dimensional time τ = ωt, where ω 2 = k/m. Use the fol¯0 = Δ0 /R = 1; g¯ = g/(Rω 2 ) = 2.5; lowing data: d¯ = d/R = 2, ζ = c/(2mω) = 0.1; Δ μ ¯ = μ/(mω) = 0.1. At the initial time, the system is at rest and θ = π/2. Present all your results for τ ∈ [0, 20].
3.4 Newtonian mechanics for a system of particles Newton’s laws, as presented in section 3.1.2, are concerned with a single particle. For many practical engineering applications, these laws must be extended to deal with systems of particles, rather than a single particle. Figure 3.39 depicts a system of N parC F2 ticles. The particles are of mass mi , i = 2 Fi f 1, 2, . . . , N . Each particle is subjected to f23 21 f rC 2i forces that can be divided into two catesi f gories: the externally applied forces and the fi1 i f i2 f12 i3 f1i internal forces. The words “internal” and f3i f32 i3 “external” should be understood with reF1 1 f13 q i spect to the system of particles. Internal f31 ri 3 F forces act and are reacted within the sys3 P I tem, whereas external forces act on the sysi2 O tem but are reacted outside the system. i1 The externally applied force acting on particle i, also called impressed force, is deFig. 3.39. A system of particles. noted F i . The origin of these forces is external to the set of particles; for instance, if the system is subjected to a gravity ſeld or an electromagnetic ſeld, the resulting gravity or electromagnetic forces, respectively,
3.4 Newtonian mechanics for a system of particles
95
would be external forces. Interaction forces between the particles of the system and other material particles would also give rise to external forces. The internal forces, denoted f ij , correspond to the forces that the various particles of the system apply on each other. According to Newton’s third law, these forces appear in pairs of forces of equal magnitude and opposite sign, sharing a common line of action. Force f ij is the force exerted by particle j on particle i, and the companion force, f ji , is that applied by particle i on particle j. Newton’s third law then implies f ij + f ji = 0. The system of particles under scrutiny is very general; it could be a rigid body, a ƀexible body, or a large number of sand particles. For the rigid body, the internal forces are the cohesion forces that make the body a “rigid body.” Of course, there exist no truly rigid body; all bodies will exhibit some amount of elastic deformation under load. For an elastic body, the internal forces are the stresses acting between the particles of the body. The deformable body could also exhibit internal energy dissipation mechanisms; such would be the case of two deformable bodies connected by dashpots, or a single body with internal material damping. If two contacting bodies are taken to form a single system of particles, the contact forces between the bodies are internal forces. If one of the two bodies, however, constitute the system of particles, the contact forces applied on that body will be external forces. 3.4.1 The center of mass As shown in ſg. 3.39, the inertial position vector of particle i is denoted ri and its mass mi . The total mass of the system, denoted m, is then found by summing up the masses of individual particles N ( m= mi . (3.55) i=1
The center of mass of the system of particles will play an important role in the analysis. The location of the center of mass is deſned as follows 1 ( mi r i . m i=1 N
rC =
(3.56)
Let si denote the relative position vector of particle i with respect to the center of mass, see ſg. 3.39. It follows that r i = r C + si , and hence, 1 ( 1 ( mi (r C + si ) = r C + mi s i . m i=1 m i=1 N
rC =
N
This result reveals an important property of the center of mass: Successive time derivatives then yield
)N i=1
mi si = 0.
96
3 Basic principles N (
mi si = 0,
(3.57a)
mi s˙ i = 0,
(3.57b)
mi ¨si = 0.
(3.57c)
i=1 N ( i=1 N ( i=1
3.4.2 The forces and moments The forces applied on each particle can be divided into two categories: the externally applied forces and the internal forces. The sum of all the forces externally applied on the system is N ( F = F i. (3.58) i=1
On the other hand, the sum of all internal forces applied on the system vanishes because all the internal forces can be grouped in pairs (f ij + f ji ) that individually vanish due to Newton’s third law; hence N (
N (
(3.59)
f ij = 0.
i=1 j=1, j=i
The sum of the moments of all the forces externally applied to the system evaluated with respect to the origin of the inertial frame, point O, is MO =
N (
ri F i .
(3.60)
i=1
The subscript, (·)O , indicates the point about which the moments are evaluated. Indeed, the moments could have been evaluated with respect to any arbitrary point. For instance, ) the moments evaluated with respect to the center of mass would N write M C = i F i , and those evaluated with respect to point P are M P = i=1 s )N q F . These various quantities are not independent; indeed, i=1 i i MP =
N ( i=1
qi F i =
N ( i=1
( rP C + si )F i = rP C F +
N (
si F i ,
i=1
where r P C is the relative position vector of the center of mass with respect to point P. It the follows that M P = M C + rP C F . (3.61) Finally, the sum of the moments of all the internal forces of the system evaluated with respect to point O vanishes. First, the moments of all internal forces are grouped
3.4 Newtonian mechanics for a system of particles
97
in pairs ( ri f ij + rj f ji ). Next, it is clear that ri f ij = r⊥ f ij and rj f ji = r⊥ f ji , where r⊥ is the vector that joins point O to the point on the common line of action of the internal force pair that is at the shortest distance from point O. It then follows that ri f ij + rj f ji = r⊥ (f ij + f ji ) = 0, by virtue on Newton’s third law. In summary, N (
N (
ri f ij = 0.
(3.62)
i=1 j=1, j=i
Note that the sum of these moments vanishes when computed with respect to any arbitrary point. 3.4.3 Linear and angular momenta The linear momentum of the system, P , is the sum of the linear momenta of the individual particles N ( P = mi v i . (3.63) i=1
A time derivative of expression r i = r C + si leads to r˙ i = r˙ C + s˙ i = v C + s˙ i , where v C = r˙ C is the velocity vector of the center of mass. The system’s linear momentum ) ) r C + s˙ i ) = m˙rC + N ˙ i = mv C , where the now becomes P = N i=1 mi (˙ i=1 mi s second property of the center mass, eq. (3.57b), was used. The linear momentum of the system then simply becomes (3.64)
P = mv C .
The angular momentum of the system computed with respect to the origin of the inertial frame, denoted H O , is the sum of the corresponding angular momenta of all particles the system N ( HO = ri mi v i . (3.65) i=1
The subscript, (·)O , indicates the point about which the angular momentum is evaluated. The angular momentum vector can be computed with respect to any point; )N for instance, H C = i=1 si mi v i is the angular momentum vector computed with )N respect to the center of mass and H P = i=1 qi mi v i the corresponding quantity evaluated with respect to an arbitrary point P, see ſg. 3.39. These various quantities are not independent of each other; indeed HP =
N ( i=1
qi mi v i =
N (
( rP C + si ) mi v i = rP C P +
i=1
N (
si mi v i .
(3.66)
i=1
It follows that H P = H C + rP C P .
(3.67)
98
3 Basic principles
3.4.4 Euler’s laws for a system of particles Euler’s ſrst law Newton’s second law applied to each of the N particles writes N (
Fi +
f ij = mi ai ,
i = 1, 2, 3, . . . N.
(3.68)
j=1, j=i
Although these equations are all correct, they are difſcult to manipulate because, in general, the system comprises a very large number of particles. To circumvent this problem, the equations of motion of all particles are added together to yield N N N N ( ( ( ( Fi + f ij = mi a i . (3.69) i=1
i=1 j=1, j=i
i=1
The ſrst term represents the sum of all externally applied forces on the system, see eq. (3.58). The second term vanishes in view of eq. (3.59). The ) last term is simpliſed by introducing the expression for the center of mass: N i=1 mi ai = )N )N r C + ¨si ) = rC = m¨rC = maC , where the property of the i=1 mi (¨ i=1 mi ¨ center mass, eq. (3.57c), was used. It follows that F = maC .
(3.70)
This result is known as Euler’s ſrst law [14, 15]. Law 5 (Euler’s ſrst law) The inertial acceleration vector of the center of mass of a system of particles is proportional to the vector sum of all externally applied forces; the constant of proportionality is the total mass of the system. Note the striking resemblance between eq. (3.70) and Newton’s second law for a single particle, eq. (3.4). It appears that Newton’s second law can be applied to a ſctitious particle of mass m located at the center of mass of the system and subjected to all the forces externally applied on the system. Equation (3.70) is much more convenient to use than the N equations of motion for each individual particle; it gives information about the overall response of the system in terms of the motion of its center of mass. Much information, however, has been lost: the N individual vector equations, eqs. (3.68), gave rise to a single vector equation of motion for the system, eq. (3.70). In fact, this latter equation cannot predict the motion of individual particles, nor does it allow to predict the internal forces in the system. In view of eq. (3.64), the time derivative of the linear momentum is P˙ = maC , and hence F = P˙ . (3.71) Clearly, this equation is identical to Euler’s ſrst law, eq. (3.70). Law 6 (Alternative statement of Euler’s ſrst law) The time derivative of the linear momentum vector of a system of particles equals the sum of all externally applied forces.
3.4 Newtonian mechanics for a system of particles
99
Euler’s second law To extract additional information about the response of the system, the moments of the equations of motion for individual particles, eqs. (3.68), with respect to the origin of the inertial frame are evaluated and summed up for all particles to yield N (
ri F i +
i=1
N (
N (
ri f ij =
i=1 j=1, j=i
N (
mi ri ai .
(3.72)
i=1
The ſrst term represents the moment of the externally applied forces computed with respect to point O, see eq. (3.60). The second term vanishes in view of eq. (3.62). Equation (3.72) now reduces to MO =
N (
mi ri ai .
(3.73)
i=1
The right-hand side of this equation can be expressed in a simpler manner in terms of the angular momentum vector; indeed, a time derivative of eq. (3.65) yields ˙ = H O
N ( i=1
mi vi v i +
N (
mi ri ai =
i=1
N (
mi ri ai .
(3.74)
i=1
Comparing the last two equations then leads to ˙ . MO = H O
(3.75)
This result is known as Euler’s second law [14, 15]. Law 7 (Euler’s second law) The time derivative of the angular momentum vector of a system of particles equals the sum of all moments externally applied to the system, when these quantities are evaluated with respect to a common inertial point. Introducing eqs. (3.61) and (3.67) into eq. (3.75) leads to ˙ + vC P + rC P˙ = H ˙ + rC F , M C + rC F = H C C which reduces to ˙ C. MC = H
(3.76)
This is another form of Euler’s second law for a system of particles. Law 8 (Alternative statement of Euler’s second law) The time derivative of the angular momentum vector of a system of particles equals the sum of all moments externally applied to the system, when these quantities are evaluated with respect to the system’s center of mass. It would be erroneous to believe that this statement holds when moments and angular momentum vectors are evaluated with respect to an arbitrary point P. Indeed, ˙ −( introducing eqs. (3.61) and (3.67) into eq. (3.75) leads to M P − rP C F = H vC − P ˙ + vP P − rP C F , and ſnally vP )P − rP C P˙ = H P ˙ P + vP P . MP = H
(3.77)
100
3 Basic principles
3.4.5 The principle of work and energy In section 3.1.4, the principle of work and energy was developed for a single particle, see eq. (3.12). When dealing with a system of particles, this principle can be applied to each individual particle, leading to %
tf
N (
(F Ti +
ti
f Tij ) dri = Ki (tf ) − Ki (ti ).
(3.78)
j=1, j=i
In this expression, Ki = 1/2 mi vi2 represents the kinetic energy of particle i. As was done in the previous sections, the equations for each individual particle are added together to ſnd %
N tf (
ti
% (F Ti dr i ) +
N tf (
ti
i=1
N (
(f Tij dr i ) =
i=1 j=1, j=i
N ( i=1
Ki (tf ) −
N (
Ki (ti ). (3.79)
i=1
This ſrst term clearly represents the work done by all externally applied forces. The second term is a complex double summation over the work done by all internal forces. It would be erroneous to believe that this term vanishes; indeed, consider two internal forces that obey Newton’s third law: f ij + f ji = 0. The differential work done by these two forces is f Tij dr i + f Tji dr j = f Tij (dr i − dr j ) = 0, since the two particles have two distinct differential displacements along their distinct paths. Finally, the terms on the right-hand side represent the difference between the total kinetic energies of the system at the ſnal and initial times. The total kinetic energy of the system, )N K, is found by summing up the contributions of each individual particle, K = i=1 Ki . The principle of work and energy for a system of particles now becomes % Wti →tf =
N tf (
ti
i=1
% (F Ti
dr i )+
N tf (
ti
N (
(f Tij dri ) = K(tf )−K(ti ). (3.80)
i=1 j=1, j=i
Although this statement is correct, it is of limited practical use because it requires the evaluation of the work done by all internal forces. This contrasts with the equations of motion derived in the previous section, eqs. (3.71) and (3.75), which do not involve the internal forces. For speciſc systems of particles it will be possible to prove that the term involving the work done by all internal forces does indeed vanish; this is the case for a rigid body, for instance. In such case, the internal forces do not appear in the statement of the principle of work and energy that can then be used conveniently. 3.4.6 The principle of impulse and momentum It is interesting to integrate Euler’s ſrst law, eq. (3.71), over a period of time from ti to tf , to ſnd
3.4 Newtonian mechanics for a system of particles
%
%
tf
tf
F (t) dt = ti
P˙ dt = P (tf ) − P (ti ).
101
(3.81)
ti
The term on the left-hand side is called the linear impulse of all externally applied forces. Equation (3.81) expresses the principle of linear impulse and momentum for a system of particles. Principle 5 (Principle of linear impulse and momentum for a system) The linear impulse of all externally applied forces equals the change in linear momentum of the system of particles. In the absence of external forces, this principle implies P (tf ) = P (ti ), i.e., the system’s linear momentum remains constant at all times, since ti and tf are instants chosen arbitrarily. A similar treatment of Euler’s second law, eq. (3.75), leads to % tf % tf ˙ dt = H (tf ) − H (ti ). M O (t) dt = (3.82) H O O O ti
ti
The term on the left-hand side is called the angular impulse of all externally applied forces. Equation (3.82) expresses the principle of angular impulse and momentum for a system of particles. Principle 6 (Principle of angular impulse and momentum for a system) The angular impulse of all externally applied forces equals the change in angular momentum of the system when both angular impulse and momentum are computed with respect to the same inertial point. In the absence of external moments with respect to point O, this principle implies H O (tf ) = H O (ti ), i.e., the system’s angular momentum remains constant at all times. Of course, a similar principle can be derived from eq. (3.76); in this case, both angular impulse and momentum must be evaluated with respect to the center of mass of the system of particles. 3.4.7 Problems Problem 3.25. Particles interconnected by a massless link Consider the dumbbell consisting of two particles of mass m1 and m2 , respectively, connected by a massless arm of constant length , as depicted in ſg. 3.40. (1) Show that the work done by all internal forces in the system vanishes. (2) Write the principle of work and energy for the system. Hint: the differential displacements of the two particles dr 1 and dr 2 , respectively, are not independent; they must satisfy the constraint imposed by the constant length bar.
Problem 3.26. Particles linked by an inextensible cable The system depicted in ſg. 3.41 consists of two particles of mass m1 and m2 , respectively, linked by an inextensible cable. (1) Show that the work done by all internal forces in the system vanishes. (2) Write the principle of work and energy for the system.
102
3 Basic principles
l
m2 m1
m2
m1 Fig. 3.40. Particles interconnected by a massless link.
Fig. 3.41. Two particles linked by an inextensible cable.
Problem 3.27. System of three rigidly connected particles Figure 3.42 depicts three particles of masses m1 , m2 , and m3 , respectively, located at the vertices of an equilateral triangle with sides of length . Particle m1 touches a ſxed plane at point A at all times and the system is subjected to a gravity ſeld as indicated on the ſgure. (1) Derive the equation of motion of the system based on Euler’s second law. (2) Show that the same equation can be obtained from the principle of conservation of total mechanical energy. (3) Plot the time history of angle θ. (4) Plot the time history of angular velocity θ . (5) Find the reaction forces at point A. (6) On one graph, plot the time histories of the non-dimensional normal contact force, F¯ n , and friction force, F¯ f , at point A. (7) If the static friction coefſcient at point A is μs = 0.5, for what value of angle θ will particle m1 start sliding? Use the following data: m1 = 10, m2 = 2, and m3 = 10 kg. Use the non-dimensional time τ = t g/, and non-dimensional forces F¯ = F/(mg), where m = m1 + m2 + m3 . At time t = 0, θ = 2π/3 radians and θ = −1, where (·) indicates a derivative with respect to the non-dimensional time τ . Present all your results for τ ∈ [0, 2].
m2 60
m1
l
o
60
m3
o
k2
i2 k3
l 60
o
m1 A
l
k1
g
q
Fig. 3.42. Three interconnected particles touching a plane at point A.
m3
c2 c3 c1
m2
i1
Fig. 3.43. Three interconnected particles.
Problem 3.28. System of three interconnected particles Figure 3.43 shows a system of three particles of masses m1 , m2 , and m3 , respectively. The particles are linked by springs of stiffness constants k1 , k2 , and k3 , respectively, and dashpots of constants c1 , c2 , and c3 , respectively. The un-stretched lengths of the springs are 1 , 2 , and 3 respectively. (1) Draw a free body diagram of each particle. (2) Derive the equations of motion of the system. (3) Solve these equations numerically for a period of 50 s. (4) On one graph, plot the coordinates of particle 1 relative to the center of mass as a function of time. (5) Plot the relative coordinates of particle 2 versus time. (6) Plot the relative coordinates of particle 3 versus time. (7) Plot the magnitude of the forces in the three spring/dashpot systems. (8) Plot the components of the linear momentum vector of the system. Comment on
3.4 Newtonian mechanics for a system of particles
103
your results. (9) Plot the components of the angular momentum vector of the system computed with respect to the center of mass. Comment on your results. (10) Plot the kinetic, and strain energies of the system. (11) Compute the energy dissipated in the dashpots. (12) Demonstrate that the principle of work and energy is veriſed by your solution. Use the following data: m1 = 5, m2 = 3 and m3 = 7 kg; k1 = 12, k2 = 25 and k3 = 6 N/m; c1 = 0.25, time, c2 = 0.12 and c3 = 0.16 N·s/m; 1 = 0.6, 2 = 0.4 and 3 = 0.9m. At the initial 0, 0 and r = 0, 0.4, 0 the position vector of the particles are r1 = 0, 0, 0 , r 2 = 0.9, 3 m, respectively. The initial velocities of the particles are v 1 = −25, 25, 0 and v 2 = v 3 = 0, 0, 0 .
Problem 3.29. System of three interconnected particles Figure 3.43 shows a system of three particles of masses m1 , m2 , and m3 , respectively. The particles are linked by springs of stiffness constants k1 , k2 , and k3 , respectively, and dashpots of constants c1 , c2 , and c3 , respectively. The un-stretched lengths of the springs are 1 , 2 , and 3 respectively. The system of particle evolves freely in two-dimensional space. (1) Is the linear momentum of the system preserved? (2) Is the angular momentum of the system preserved. (3) Is the total mechanical energy of the system preserved. (4) Write an energy related quantity that is preserved during the evolution of the system.
Problem 3.30. Particles interconnected by a spring and damper Figure 3.44 shows two particles of mass m1 and m2 connected together by a spring of stiffness k and a damper of constant c. The initial conſguration of the system is indicated on the ſgure and the initial velocity vectors of the two particles are v 10 and v 20 , respectively. The following quantities are deſned: Ω 2 = k/m and c = 2mΩζ, where m = m1 + m2 . In the present conſguration, r1 and r2 measure the distance from the center of mass to particles m1 and m2 , respectively. For this problem, it is convenient to use the polar coordinate system indicated on the ſgure with its origin at the center of mass of the system. (1) When applying Newton’s second law to this problem, can the accelerations of the particles with respect to the center of mass be used? Justify your answer. (2) Are r1 and r2 independent variables? (3) Set up the equations of motion of the system. (4) Plot r1 as a function of the non-dimensional time τ = Ωt for τ ∈ [0, 10π]. (5) Plot θ(τ ). (6) Plot the trajectory of the particle in space. (7) Plot ˙ ¯ ) = θ/Ω. the history of the non-dimensional angular velocity Ω(τ (8) Plot the history of the components of the velocity vector of particle m1 in the inertial frame, v¯1x = v1x /(Ωr10 ) and v¯1y = v1y /(Ωr10 ). Plot the corresponding quantities for the velocity vector of the second particle. (9) Plot the history of the non-dimensional total mechanical energy of the system 2 ¯ ) = E/(mΩ 2 r10 E(τ ); comment your result. (10) Compute the non-dimensional cumulative 2 ¯ (τ ) = W/(mΩ 2 r10 ) as a function of τ . (11) Plot the energy dissipated in the damper W ¯ ¯ history of the quantity E(τ ) + W (τ ); comment your result. Use the following data: μ1 = m1 /m = 0.3; ζ = 0.02; v 1 (t = 0)/(Ωr10 ) = −0.1¯ı1 − 0.5 ¯ı2 ; v 2 (t = 0)/(Ωr10 ) = 2.2 ¯ı1 + 0.6 ¯ı2 ; θ0 = 0; r1 (t = 0)/r10 = 1;
Problem 3.31. Particle suspended from a circular track Figure 3.45 shows a particle of mass M sliding along a track deſned by a curve p0 (s) under the effect of gravity. A particle of mass m is suspended from the ſrst particle by means of a spring of stiffness constant k in parallel with a dashpot of constant c. The un-stretched length of the spring is Δ0 . A viscous friction force F f = μs˙ is acting between particle M and the track. (1) Derive the three equations of motion of the system for a curve of arbitrary shape. (2) Particularize the equations of motion to the case where the curve is a circle of radius R, as depicted in the right portion of ſg. 3.45. (3) Solve these equations numerically. (4) On one ¯2 = x2 /R, of particle m. (5) Plot the history of graph, plot the coordinates, x ¯1 = x1 /R and x
104
3 Basic principles
i2 v20 m2
Initial configuration v10
s p0(s) i2
m1
C r20
r10
Present configuration r1 c e2 k r2
k x
i1 e1
c
g m i1
O
s
q
M
i2
R
q
M
i1 c
C
k
Fig. 3.44. Particles interconnected by a spring and damper.
m
Fig. 3.45. Particle suspended from a circular track.
angle θ. (6) On one graph, plot the velocity components, v¯1 = v1 /(Rω) and v¯2 = v2 /(Rω), ˙ (8) Plot the history of the of particle m. (7) Plot the history of the angular rate θ = θ/ω. normal force, F c , the track applies on the particle, as F¯ c = F c /(mRω 2 ). (9) Plot the non¯ = K/mR2 ω 2 , potential energy, V¯ = V /(mR2 ω 2 ), energy dimensional kinetic energy, K ¯ c = W c /(mR2 ω 2 ), and energy dissipated at the viscous friction dissipated in the damper, W ¯ f = W f /(mR2 ω 2 ). Verify that the energy closure equation is satisſed. Use interface, W the following non-dimensional quantities: θ = s/R, and non-dimensional time τ = ωt, ¯0 = Δ0 /R = 0.5; where ω 2 = k/m. Use the following data: ζ = c/(2mω) = 0.2; Δ g¯ = g/(Rω 2 ) = 2.5; μ ¯ = μ/(M ω) = 0.2; m ¯ = m/M = 0.25. At the initial time, the ¯0 ), 0 and θ = 0. Present system is at rest, the position vector of particle m is x = −(1 + Δ all your results for τ ∈ [0, 20]
Problem 3.32. Two particles linked by an elastic spring Consider the system depicted in ſg. 3.46 that consists of two particles of mass m1 and m2 , respectively, connected by a massless spring of stiffness k. (1) Show that the work done by the force in the elastic spring, can be derived from a potential. (2) What is the expression of the strain energy function of the spring if it is a linearly elastic spring of stiffness constant k.
u
m2
i2 k
q
m
x m1 Fig. 3.46. Two particles linked by an elastic spring.
g
l k
M
i1
Fig. 3.47. Inverted pendulum mounted on a track.
3.4 Newtonian mechanics for a system of particles
105
Problem 3.33. Inverted pendulum mounted on a track Figure 3.47 shows an inverted pendulum of length with a tip mass m. The pendulum is mounted on a cart of mass M free to translate along a horizontal track. A torsional spring of stiffness constant k restrains the pendulum at its attachment point. The spring is un-stretched when angle θ = 0. (1) Derive the two equations of motion of the system. (2) Solve these equations numerically. (3) Plot the cart’s position, x ¯ = x/ versus τ . (4) Plot angle θ. (5) ¯ . (8) Plot θ . (9) Plot the cart’s velocity, x ¯ . (6) Plot θ . (7) Plot the cart’s acceleration, x 2 2 2 2 ¯ ¯ Plot the system’s kinetic, K = K/m ω , potential, V = V /(m ω ), and total mechanical energies. Use the following data: μ = M/m = 1.5. Use non-dimensional time τ = ωt, where ω 2 = k/(m2 ) and (·) denotes a derivative with respect to τ . At the initial time, x ¯ = 0, x ¯ = 1, θ = π/4, θ = 0. Present all your results for τ ∈ [0, 20]. Study two cases, g¯ = g/(ω 2 ) = 0.8 and g¯ = 4, and comment on the differences.
Problem 3.34. Flexible pendulum on a slider Figure 3.48 depicts a slider of mass M constrained x M e2 i2 to move along a horizontal track. A bob of mass m O is attached to the slider at point A by means of a A k r g spring of stiffness constant k and un-stretched length Fd r0 . The displacement of the slider is denoted x, and m i1 the position of the bob is expressed by its polar coe1 ordinates, r and θ. Gravity acts on the system as inq dicated in the ſgure. The bob is subjected to a drag force F d = −Acd v m v m , where is the ƀuid Fig. 3.48. Flexible pendulum mass density, A the cross-sectional area of the bob, mounted on a slider. cd is the drag coefſcient, and v m the velocity vector of the bob. (1) Derive the equations of motion of the system using the coordinates x, r, and θ. (2) Solve these equations numerically. (3) Plot the cart’s position, x ¯ = x/r0 versus τ . (4) Plot distance r¯ = r/r0 . (5) Plot angle θ. ¯ . (10) (6) Plot the cart’s velocity, x ¯ . (7) Plot r¯ . (8) Plot θ . (9) Plot the cart’s acceleration, x 2 ¯ d = Wd /(mr0 ω 2 ). (13) Plot r¯ . (11) Plot θ . (12) Plot the cumulative dissipated energy, W 2 2 2 2 ¯ ¯ Plot the system’s kinetic, K = K/mr0 ω , potential, V = V /(mr0 ω ), and total mechanical energies. Check the energy closure equations. Use the following data: μ = M/m = 1.5, ¯ d = 0.01, where ¯ = r03 /m and A ¯ = A/r02 . Use g¯ = g/(r0 ω 2 ) = 0.2, and ζ = ¯Ac 2 non-dimensional time τ = ωt, where ω = k/m and (·) denotes a derivative with respect to τ . At the initial time, x ¯ = 0, r¯ = 2, θ = π/4, x ¯ = 1, r¯ = 1, θ = 0. Present all your results for τ ∈ [0, 20].
4 The geometric description of rotation
The most natural way of describing rotations is rooted in their geometric representation, which is the focus of this chapter. More abstract approaches, however, also exist and will be presented in chapter 13. Consider an orthonormal basis I = (¯ı1 , ¯ı2 , ¯ı3 ). The rotation operation brings orthonormal basis I to a new orthonormal basis E = (¯ e1 , e¯2 , e¯3 ). In section 4.1, the rotation operation is characterized by expressing the unit vectors of basis E in terms of those of basis I. This leads to the concept of direction cosine matrix. The simplest rotation operation consists of a rotation of basis I about one of its unit vectors. This operation, called a planar rotation, is discussed in section 4.2. The fact that successive planar rotations in distinct planes do not commute is emphasized in section 4.3, and leads to the representation of arbitrary rotations in terms of three successive planar rotations. The resulting Euler angle representation is described in section 4.4. Euler’s theorem on rotations presented in section 4.5 states that any arbitrary rotation that leave a point ſxed can be viewed as a single rotation about a unit vector. This fundamental result leads to the concept of rotation tensor presented in section 4.6; a formal deſnition of tensors follows. Important rotation operations are examined in details: the composition of rotations is presented in section 4.9, and time and space derivatives of rotations in sections 4.10 and 4.12, respectively. Applications to particle dynamics are presented in section 4.13.
4.1 The direction cosine matrix Consider the two orthonormal bases I = (¯ı1 , ¯ı2 , ¯ı3 ) and E = (¯ e1 , e¯2 , e¯3 ) shown in ſg. 4.1. A rotation is deſned as the operation that brings basis I to basis E. Unit vector e¯1 can be expressed as a linear combination of the vectors of basis I e¯1 = D11¯ı1 + D21¯ı2 + D31¯ı3 .
(4.1)
The coefſcients of this linear combination are readily expressed as Dk1 = ¯ıTk e¯1 . Proceeding similarly with the three unit vectors deſning basis E yields the terms of
O. A. Bauchau, Flexible Multibody Dynamics, DOI 10.1007/978-94-007-0335-3_4 © Springer Science+Business Media B.V. 2011
108
4 The geometric description of rotation
the direction cosine matrix, D, as Dk = ¯ıTk e¯ . e3 E
i3
e2
(4.2)
Using eq. (1.8), and observing that vectors ¯ık and e¯ are unit vectors yields an alternative expression for the direction cosine matrix is obtained Dkl = cos (¯ık , e¯ ) .
(4.3)
e1
This expression gives its name to the direction cosine matrix: its entries are the cosine of the angle between ¯ık i1 I and e¯ , the unit vectors deſning bases I and E, respectively. Each component of the direction cosine matrix is Fig. 4.1. rotation from basis a scalar quantity. The direction cosine matrix, however, I to E. is not a second-order tensor, see section 4.8.2. The matrix of direction cosines provides a simple description of rotations. Each term of the direction cosine matrix is a scalar quantity representing the cosine of the angle between two vectors, eq. (4.2). As will be shown in the following sections, rotations can be represented by as few as three parameters. This basic property of rotation is not apparent in this description. i2
4.2 Planar rotations A simple example of a rotation is a planar rotation deſned as a rotation of angular magnitude e3 φ about one of the axes deſning basis I, say f ¯ ı 1 , as depicted in ſg. 4.2. The direction cosine i3 matrix corresponding to this planar rotation can be readily obtained from eq. (4.3) and inspecf i2 e2 tion of ſg. 4.2. The coefſcients of the direction cosine matrix are obtained from elementary Fig. 4.2. Planar rotation of magnitude trigonometry as φ about axis ¯ı1 . ⎧ ⎤ ⎡ 1 0 0 ⎨ e¯1 = ¯ı1 e¯2 = cos φ ¯ı2 + sin φ ¯ı3 ⇐⇒ D1 (φ) = ⎣0 cos φ − sin φ ⎦ . (4.4) ⎩ 0 sin φ cos φ e¯3 = − sin φ ¯ı2 + cos φ ¯ı3 i1 = e1
The direction cosine matrix corresponding to planar rotation of magnitude φ about axis ¯ı2 is found in a similar manner as ⎧ ⎤ ⎡ cos φ 0 sin φ ⎨ e¯1 = cos φ ¯ı1 − sin φ ¯ı3 1 0 ⎦. e¯2 = ¯ı2 (4.5) ⇐⇒ D2 (φ) = ⎣ 0 ⎩ − sin φ 0 cos φ e¯3 = sin φ ¯ı1 + cos φ ¯ı3 The corresponding matrix for a planar rotation of magnitude φ about axis ¯ı3 becomes
4.4 Euler angles
⎧ ⎤ ⎡ cos φ − sin φ 0 ⎨ e¯1 = cos φ ¯ı1 + sin φ ¯ı2 e¯2 = − sin φ ¯ı1 + cos φ ¯ı2 ⇐⇒ D3 (φ) = ⎣ sin φ cos φ 0⎦ . ⎩ 0 0 1 e¯3 = ¯ı3
109
(4.6)
4.3 Non-commutativity of rotations Rotation operations do not commute. 90° about i3 90° about i2 This means that the order in which successive rotations are performed is imi3 portant. This point is most easily understood by looking at the simple example i2 depicted in ſg. 4.3. A rigid block is rotated by 90◦ i1 about ¯ı2 , then by 90◦ about ¯ı3 . The ſ90° about i3 nal conſguration of the block is shown 90° about i2 in the top portion of ſg. 4.3. The same rigid block is now rotated by 90◦ about Fig. 4.3. Two successive planar rotations do not ¯ı3 , then by 90◦ about ¯ı2 . The ſnal con- commute. ſguration, depicted in the bottom portion of ſg. 4.3, is clearly different from that obtained when the two successive rotations were performed in the reverse order. In this example, the two successive rotations are performed about axes ſxed in space. If the two rotations are performed about body ſxed axes, the same conclusion is reached: the ſnal conſguration depends on the order of the rotation operations. In the next section, it will be shown that an arbitrary rotation can be viewed as a succession of three planar rotations. The fact that rotation operations about distinct axes do not commute implies that the order in which these three successive planar rotations are performed is important. More generally, when several rotations are involved in a problem, the order of application of these rotations must be carefully speciſed.
4.4 Euler angles An arbitrary rotation from I = (¯ı1 , ¯ı2 , ¯ı3 ) to E = (¯ e1 , e¯2 , e¯3 ) can be viewed as a succession of three planar rotations about three different axes [16]. Figure 4.4 shows one possible set of three planar rotations, which can be described as follows. 1. A planar rotation of magnitude φ, called precession, about axis ¯ı3 brings basis I to basis A = (¯ a1 , a ¯2 , a ¯3 ). Equation (4.6) gives the corresponding direction cosine matrix ⎧ ⎤ ⎡ ¯1 = cos φ ¯ı1 + sin φ ¯ı2 , cos φ − sin φ 0 ⎨a a ¯2 = − sin φ ¯ı1 + cos φ ¯ı2 , ⇐⇒ D3 (φ) = ⎣ sin φ cos φ 0⎦ . (4.7) ⎩ 0 0 1 a ¯3 = ¯ı3 .
110
4 The geometric description of rotation
2. A planar rotation of magnitude θ, called nutation, about axis a ¯1 brings basis A to basis B = (¯b1 , ¯b2 , ¯b3 ). Equation (4.4) gives the corresponding direction cosine matrix ⎧ ⎤ ⎡ 1 0 0 ¯1 , ⎨ ¯b1 = a ¯b2 = cos θ a ¯2 + sin θ a ¯3 , ⇐⇒ D1 (θ) = ⎣0 cos θ − sin θ ⎦ . (4.8) ⎩¯ 0 sin θ cos θ b3 = − sin θ a ¯2 + cos θ a ¯3 . 3. A planar rotation of magnitude ψ, called spin, about axis ¯b3 brings basis B to basis E. Once again, eq. (4.6) gives the corresponding direction cosine matrix ⎧ ⎤ ⎡ cos ψ − sin ψ 0 ⎨ e¯1 = cos ψ ¯b1 + sin ψ ¯b2 , e¯2 = − sin ψ ¯b1 + cos ψ ¯b2 , ⇐⇒ D3 (ψ) = ⎣ sin ψ cos ψ 0⎦ . (4.9) ⎩ ¯b3 . 0 0 1 e¯3 = The relationship between bases I and E is obtained by combining the three successive rotations described by eqs. (4.7) to (4.9) to ſnd ⎧ ⎨ e¯1 = ( Cφ Cψ − Sφ Cθ Sψ ) ¯ı1 +( Sφ Cψ + Cφ Cθ Sψ ) ¯ı2 +Sθ Sψ ¯ı3 , e¯2 = (−Cφ Sψ − Sφ Cθ Cψ ) ¯ı1 +(−Sφ Sψ + Cφ Cθ Cψ ) ¯ı2 +Sθ Cψ ¯ı3 , (4.10) ⎩ e¯3 = Sφ Sθ ¯ı1 −Cφ Sθ ¯ı2 +Cθ ¯ı3 , where the following short-hand notations were used: Cφ = cos φ, Sφ = sin φ, etc. The three rotation angles, φ, θ, and ψ, are called the Euler angles. The direction cosine matrix expressed in terms of Euler angles becomes ⎡ ⎤ Cφ Cψ − Sφ Cθ Sψ −Cφ Sψ − Sφ Cθ Cψ Sφ Sθ D3-1-3 = ⎣Sφ Cψ + Cφ Cθ Sψ −Sφ Sψ + Cφ Cθ Cψ −Cφ Sθ ⎦ . (4.11) Sθ Sψ Sθ Cψ Cθ It is often important to perform the inverse operation: given a direction cosine matrix, ſnd the corresponding Euler angles. The following process will yield the desired angles. Assuming D32 = 0, (4.12a)
tan ψ = D31 /D32 , sin θ = D31 sin ψ + D32 cos ψ, sin φ = D21 cos ψ − D22 sin ψ,
cos θ = D33 , cos φ = D11 cos ψ − D12 sin ψ.
(4.12b) (4.12c)
To remove the ambiguity associated with inverse trigonometric functions, both sine and cosines of the angles are derived, leading to a deſnition of each angle in the range [−π, +π].1 When θ = 0 or π, a singularity occurs. In fact, the process then reduces to a single rotation of magnitude (φ + ψ) or (φ − ψ) for θ = 0 or π, respectively, because the direction cosine matrix reduces to 1
In computer implementations, these operations are conveniently performed with the help of the function atan2(y, x) = tan−1 (y/x), yielding an angle in the range [−π, +π].
4.4 Euler angles
⎡
111
⎤
cos(φ ± ψ) − sin(φ ± ψ) 0 D = ⎣ sin(φ ± ψ) cos(φ ± ψ) 0⎦ . 0 0 1
(4.13)
Clearly, angles φ and ψ cannot be determined individually, the sole combination φ ± ψ can be evaluated. The Euler angles introduced above correspond to the following sequence of planar rotations: a rotation of magnitude φ, about axis ¯ı3 , then, a rotation of magnitude θ about axis a ¯1 , and ſnally, a rotation of magnitude ψ about axis ¯b3 . This sequence will be called the “3-1-3 sequence” to indicate the sequence of body axes about which the three successive rotations are taking place. Clearly, Euler angles could be deſned i3 = a3 e2 q in several different manners: the ſrst rotay b tion could occur about either of the three e = b 2 3 3 axes, ¯ı1 , ¯ı2 , or ¯ı3 , offering three choices. q Because two consecutive rotations cannot a2 take place about the same axis, two alterf natives are possible for the second rotation. i2 Two choices are again possible for the last rotation. In all, 3×2 ×2 = 12 possible choices ex- i1 ist, corresponding to sequences labeled 1-2y e1 f 1, 1-2-3, 1-3-1, 1-3-2, 2-1-2, 2-1-3, 2-3-1, a1 = b1 2-3-2, 3-1-2, 3-1-3, 3-2-1 and 3-2-3. Three of these sequences, 3-2-3, 3-2-1 and 3-1- Fig. 4.4. An arbitrary rotation viewed as 2 will be the focus of problems below. A three successive planar rotations. summary of expressions and formulæ involving Euler angles appears in section 4.11. The representation of rotation in terms of three Euler angles shows that the direction cosine matrix can be expressed in terms of three parameters only. This representation, however, presents several drawbacks. First, Euler angles can be deſned in several different manners, and the choice of the rotation sequence is entirely arbitrary. Furthermore, the expression for the direction cosine matrix, as seen for this example in eq. (4.11), is rather complicated and involves the evaluation of numerous trigonometric functions. Finally, singularities will occur in the evaluation of Euler angles from a direction cosine matrix for all 12 possible sequences. 4.4.1 Problems Problem 4.1. Euler angles, sequence 3-2-3 A popular choice of Euler angles is the 3-2-3 sequence that corresponds to the following sequence of planar rotations: a rotation of magnitude ψ, called precession, about axis ¯ı3 , then, a rotation of magnitude θ, called nutation, about axis a ¯2 , and ſnally, a rotation of magnitude φ, called spin, about axis ¯b3 . (1) Find the rotation matrix in terms of this Euler angle sequence. (2) Determine the singularities associated with this choice of Euler angles.
112
4 The geometric description of rotation
Problem 4.2. Euler angles, sequence 3-2-1 A popular choice of Euler angles for airplane ƀight mechanics is the 3-2-1 sequence that corresponds to the following sequence of planar rotations: a rotation of magnitude ψ, called ¯2 , and heading, about axis ¯ı3 , then, a rotation of magnitude θ, called attitude, about axis a ſnally, a rotation of magnitude φ, called bank, about axis ¯b1 . (1) Find the rotation matrix in terms of this Euler angle sequence. (2) Determine the singularities associated with this choice of Euler angles.
Problem 4.3. Euler angles, sequence 3-1-2 A possible choice of Euler angles is the 3-1-2 sequence that corresponds to the following sequence of planar rotations: a rotation of magnitude φ, about axis ¯ı3 , then, a rotation of magnitude θ about axis a ¯1 , then ſnally, a rotation of magnitude ψ about axis ¯b2 . (1) Find the rotation matrix in terms of this Euler angle sequence. (2) Determine the singularities associated with this choice of Euler angles.
4.5 Euler’s theorem on rotations Euler’s theorem [17] on rotations states the following. Theorem 4.1 (Euler’s theorem on rotations). Any arbitrary rotation of a rigid body that leaves on of its point ſxed can be viewed as a single rotation of magnitude φ about a unit vector n ¯. To prove this statement, consider two frames, F1 = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )] and F2 = e3 [O, E = (¯ e1 , e¯2 , e¯3 )], shown in ſg. 4.5, and C¢ n associated with two conſgurations of a rigid B¢ body that its material point O ſxed. Because e2 the vectors deſning bases I and E are unit O i2 vectors, they all are radii of a sphere of unit B radius and center O. Vector ¯ı1 can be brought to vector e¯1 by a single rotation about axis n ¯ 1 . This axis passes A through point O and belongs to plane P1 that i1 is normal to segment AA and passes through e1 A¢ point O, as shown in ſg. 4.5. Fig. 4.5. An arbitrary rotation viewed as On the other hand, vector ¯ı2 can be a single rotation about axis n ¯. brought to vector e¯2 by a single rotation about axis n ¯ 2 , passing through point O and belonging to plane P2 , which is normal to the segment BB and passes through point O. If both operations must be achieved by a single rotation, axis n ¯ about which this common rotation takes place must be at the intersection of planes P1 and P2 . Let point P be the intersection of axis n ¯ with the unit sphere. Figure 4.5 shows the great circle segments PA, PA , PB, PB , AB, and A B . By construction, PA = PA because point A can be brought to point A by a rotation i3
C
P
4.6 The rotation tensor
113
about n ¯ . Similarly, PB = PB . Finally, AB = A B since both segments correspond to a 90 degree rotation. Consequently, the spherical triangles APB and A PB are equal. This, in turn, implies the equality of angles ∠APB and ∠A PB . Subtracting from these two angles their common part, ∠A PB, yields the following result: ∠APA = ∠BPB = φ, where φ is now the magnitude of the rotation about axis n ¯ that simultaneously brings ¯ı1 to e¯1 and ¯ı2 to e¯2 . A rotation of magnitude φ about axis n ¯ has been shown to bring ¯ı1 to e¯1 , and ¯ı2 to e¯2 simultaneously. It remains to prove that a rotation of the same magnitude will bring ¯ı3 to e¯3 . Let the rotation of magnitude φ about axis n ¯ bring ¯ı3 to vector ¯ı3 . Rea soning as before, it is clear that PC = PC’, PA = PA , and by construction ∠APC = ∠A PC = φ + ∠APC . This shows the equality of spherical triangles APC and A PC . This in turns implies the equality of segments AC and A C . Since segment AC corresponds to a 90 degree rotation, so does segment A C , implying the orthogonality of ¯ı3 and e¯1 . A similar reasoning on spherical triangles BPC and B PC leads to the orthogonality of ¯ı3 and e¯2 . Finally, since ¯ı3 is orthogonal to both e¯1 and e¯2 , it is clear that ¯ı3 = e¯3 . In summary, basis I can be brought to basis E by a single rotation of magnitude φ about axis n ¯ , which proves Euler theorem on rotations.
4.6 The rotation tensor Euler’s theorem on rotations leads a compact expression for the rotation tensor. Consider an arbitrary vector a and let the rotation of magnitude φ about unit vector n ¯ bring this vector to b. The rotation tensor, R, relates these two vectors, b = R a Basic expression for the rotation tensor Figure 4.6 depicts the conſguration of the problem. A s n Vector b is the sum of segments OC and CB, and C elementary geometry then yields b = OC + CB = i3 b cos α n ¯ + b sin α [¯ s cos φ + t¯sin φ]. Unit veca f tor t¯ is along the vector product of vectors n ¯ and a t a B a, t¯ = n a/ na, and unit vector s¯ is s¯ = tn ¯ = b ( na)¯ n/ na. O i2 The fundamental property of rotation is to preserve length, i.e., the norms of vectors a and b i1 must be identical, leading to n ¯ T a = a cos α = b cos α and na = a sin α = b sin α. With Fig. 4.6. A rotation of magnitude φ about axis n ¯. the help of these relationships, vector b becomes b = (¯ nT a) n ¯ + ( na)¯ n cos φ + ( na) sin φ. Applying identity (1.34a) then leads to b = a + sin φ ( na) + (1 − cos φ) n n a = R a,
(4.14)
114
4 The geometric description of rotation
where the rotation tensor [15], R, is deſned as R = I + sin φ n + (1 − cos φ) nn .
(4.15)
This result is known as Rodrigues’ rotation formula. This fundamental result expresses the rotation tensor in terms of a unit vector n ¯, and a rotation of magnitude φ about this unit vector. It is a direct consequence of Euler’s theorem on rotations, theorem 4.1. In view of eq. (4.15), vector n ¯ can be expressed as ⎧ ⎫ ⎫ ⎧ R − R23 ⎬ ⎨1/(R32 + R23 )⎬ 1 ⎨ 32 R13 − R31 = n1 n2 n3 (1 − cos φ) 1/(R13 + R31 ) . n ¯= ⎩ ⎭ 2 sin φ ⎩R − R ⎭ 1/(R21 + R12 ) 21 12 Hence, the orientation of this vector is ⎧ ⎫ ⎨R32 − R23 ⎬ n ¯ R13 − R31 , ⎩ ⎭ R21 − R12
⎧ ⎫ ⎨1/(R32 + R23 )⎬ n ¯ 1/(R13 + R31 ) , ⎩ ⎭ 1/(R21 + R12 )
where symbol indicates the parallelism of two vectors. Relating the rotation tensor to the matrix of direction cosines The rotation tensor and matrix of direction cosines are closely related to each other. e1 , e¯2 , e¯3 ) and Consider a rotation that brings basis I = (¯ı1 , ¯ı2 , ¯ı3 ) to basis E = (¯ let the matrix of direction cosines, D , eq. (4.1), deſne this rotation. Resolving the vector quantities in basis I then yields [I]
[I]
e¯1 = D ¯ı1 ,
(4.16)
[I]T
[I]T = 1, 0, 0 , ¯ı2 = 0, 1, 0 , and where the following identities were used: ¯ı1
[I]T ¯ı3 = 0, 0, 1 . On the other hand, if rotation tensor R rotates vector ¯ı1 to e¯1 , eq. (4.14) implies e¯1 = R ¯ı1 . Resolving this tensor relationship in basis I then yields [I]
[I]
e¯1 = R[I]¯ı1 .
(4.17)
Identifying eqs. (4.16) and (4.17) yields the relationship between the direction cosine matrix and the rotation tensor as D = R[I] .
(4.18)
The entries of the direction cosine matrix describing the rotation from I to E are identical to the components of the rotation tensor describing the same rotation and resolved in basis I.
4.7 Properties of the rotation tensor
115
Multiplicative decompositions of the rotation tensor Two multiplicative decompositions of the rotation tensor are now presented. The ſrst is the “square root,” G, of the rotation tensor, R, deſned as R = G G.
(4.19)
φ φ + (1 − cos ) n n . G = I + sin n 2 2
(4.20)
It is readily veriſed that
It is interesting to note that the “square root” of the rotation tensor corresponds to a rotation of φ/2 about axis n ¯ , and hence, is itself an orthogonal tensor, G GT = I. The following results then follow R − I = G G − G GT = G(G − GT ) = 2 sin
φ φ Gn G. = 2 sin n 2 2
(4.21)
The second multiplicative decomposition of the rotation tensor is φ R = I + tan 2 φ = I + tan 2 Note that
−T φ n I + tan n 2 −T φ n . I + tan n 2
−T " φ 1! I + tan n R+I . = 2 2
(4.22)
(4.23)
4.7 Properties of the rotation tensor Inspection of equation (4.15) reveals that symm(R) = I cos φ + (1 − cos φ)¯ nn ¯T , and skew(R) = n sin φ. It then follows that axial(R) = n ¯ sin φ. The invariants of the rotation tensor can also be directly evaluated from eq. (4.15) as I1 = tr(R) = 1 + 2 cos φ, I2 = 1 + 2 cos φ, and I3 = det(R) = 1. The characteristic equations, eq. (1.55), now becomes −λ3 + (1 + 2 cos φ)λ2 − (1 + 2 cos φ)λ + 1 = 0. Eigenvalues and eigenvectors of the rotation tensor The ſrst fundamental property of the rotation tensor is that it possesses a unit eigenvalue, λ = +1, associated with eigenvector n ¯ . Indeed, it follows from eq. (4.15) that Rn ¯=n ¯. (4.24)
116
4 The geometric description of rotation
This indicates that (λ − 1) should be a factor of the characteristic equation, which can indeed be written as (λ − 1)(λ2 − 2λ cos φ + 1) = 0. The other two eigenvalues √ of the rotation tensor are complex conjugate roots, cos φ ± i sin φ, where i = −1. In summary, the eigenvalues of the rotation tensor are λ1 = 1, λ2,3 = cos φ ± i sin φ = e±iφ . (4.25) Consider now two mutually orthogonal, unit vectors u ¯ and v¯, which lie in the plane normal to n ¯ , such that E = (¯ n, u ¯, v¯) forms an orthonormal basis. It is easily veriſed that Ru ¯ = cos φ u ¯ + sin φ v¯,
R v¯ = − sin φ u ¯ + cos φ v¯.
Clearly, vectors u ¯ and v¯ undergo a planar rotation of magnitude φ in the plane normal to the axis of rotation, n ¯ . Linear combinations of these two equations then leads to R(¯ u − iv) = (cos φ + i sin φ)(¯ u − i¯ v ),
R(¯ u + iv) = (cos φ − i sin φ)(¯ u + i¯ v ).
This reveals that (¯ u ∓ i¯ v) are the complex conjugate eigenvectors associated with the complex conjugate eigenvalues cos φ ± i sin φ, respectively. Orthogonality of the rotation tensor The second fundamental property of the rotation tensor is that it is an orthogonal tensor. Using eq. (4.15), it is readily veriſed that R RT = RT R = I,
(4.26)
which implies det(R) = ±1. in general, orthogonal tensors have a determinant of ±1. Equation (4.25) shows, however, that det(R) = λ1 λ2 λ3 = +1: the rotation tensor belongs to the class of proper orthogonal tensors for which det(R) = +1.
4.8 Change of basis operations 4.8.1 Vector components in various orthonormal bases Consider an orthonormal basis B 1 = (¯ı11 , ¯ı12 , ¯ı13 ), and an arbitrary vector a1 . Next, consider a rotation of magnitude φ about a unit vector n ¯ . The corresponding rotation tensor is denoted R. Let vectors ¯ı21 , ¯ı22 , ¯ı23 , and a2 be the vectors resulting from the application of rotation R to vectors ¯ı11 , ¯ı12 , ¯ı13 , and a1 , respectively. It is clear that vectors ¯ı21 , ¯ı22 , and ¯ı23 deſne a new orthonormal basis B 2 . Vectors a1 and a2 are related by eq. (4.14), i.e., a2 = R a1 . This tensor relationship is now resolved in basis B 1 to 1
1
1
ſnd a2[B ] = R[B ] a1[B ] . By construction, the components of vector a1 resolved in basis B 1 are identical 1 2 those of a2 resolved in basis B 2 , a1[B ] = a2[B ] . It follows that the relationship
4.8 Change of basis operations
117 1
between the components of vector a2 expressed in bases B 1 and B 2 is a2[B ] = 1 2 R[B ] a2[B ] . Because vector a1 is arbitrary, this relationship holds for any vector v, i.e., 1
v [B ] = R[B v
[B2 ]
=R
1
]
2
v [B ] ,
(4.27a)
[B1 ]T [B1 ]
(4.27b)
v
.
These equations express the transformation laws for the components of a ſrst-order tensor. In fact, the rigorous deſnition of a ſrst-order tensor is as follows. Deſnition 4.1 (ſrst-order tensor). A ſrst-order tensor is a mathematical entity whose components resolved in two bases are related by eqs. (4.27). 1
The component of vector n ¯ resolved in bases B 1 and B 2 are identical, n ¯ [B ] = [B2 ] n ¯ . Consequently, in view of eq. (4.15), the components of the rotation tensor that bring basis B 1 to B 2 , resolved in those two bases, are also identical 1
2
R[B ] = R[B ] .
(4.28)
4.8.2 Second-order tensor components in various orthonormal bases Consider now a second-order tensor such as T = a bT , where a and b are two arbitrary vectors. The components of this tensor in two distinct bases are T [B 1
[B1 ] [B ]T
2
[B ]
1
]
=
2
[B2 ] [B ]T
and T = a b . Using the transformation law for ſrst-order a b tensors, eq. (4.27), the transformation laws for the components of second-order tensors are found to be 2
T [B ] = R[B T
[B1 ]
1
]T
[B1 ]
=R
1
1
T [B ] R[B ] ,
(4.29a)
[B2 ]
(4.29b)
T
R
T [B1 ]
.
The rigorous deſnition of second-order tensors is as follows. Deſnition 4.2 (second-order tensor). A second-order tensor is a mathematical entity whose components resolved in two bases are related by eqs. (4.29). Example 4.1. First- and second-order tensors The previous sections have given precise deſnitions of ſrst- and second-order tensors as mathematical entities whose components resolved in two bases are related by eqs. (4.27) and (4.29), respectively. Consider a vector (ſrst-order tensor) whose components in two bases, B and B ∗ , are denoted a and a∗ , respectively. In the notation of the above sections, a = a[B] and ∗ a∗ = a[B ] . The simpliſed notation, a and a∗ , is clearly much simpler, provided that all symbols are clearly deſned. If the components of the rotation tensor that brings basis B to B ∗ , resolved in B, are denoted R, eq. (4.27) implies that a∗ = RT a. Consider now the skew symmetric operators a and a∗ formed with the components
118
4 The geometric description of rotation
of vector a resolved in bases B and B ∗ , respectively. Prove that a and a∗ are the components of a skew-symmetric, second-order tensor, a. If a is a second-order tensor, its components resolved in two bases must be related by eq. (4.29). Hence, the tensorial nature of a will be established if and only if a∗ = R T aR ⇐⇒ a∗ = RT a.
(4.30)
This statement can be proved based on simple, but tedious algebraic manipulations, taking into account the fact that R is an orthogonal tensor. Example 4.2. The rotation tensor The rotation tensor was introduced in section 4.6 and was called a “tensor.” Prove that the rotation tensor is indeed a second-order tensor. Euler’s theorem deſnes the rotation tensor in terms of a unit vector n ¯ about which a rotation of magnitude φ is taking place. Let n ¯ be the components of this unit vector resolved in basis B; the components of the rotation tensor, S, resolved in the same basis are then given by eq. (4.15) as S = I + sin φ n + (1 − cos φ) n n . Consider now an arbitrary basis B ∗ and let the components of unit vector n ¯, resolved in this basis, be denoted n ¯ ∗ = RT n ¯ , where R are the components of the rotation tensor that brings basis B to B ∗ , resolved in basis B. It then follows that n∗ RT + (1 − cos φ) R n ∗ R RT n ∗ RT S = I + sin φ R = R I + sin φ n ∗ + (1 − cos φ) n ∗ n ∗ RT = R S ∗ RT , where the orthogonality property of the rotation tensor was used together with eq. (4.30). Clearly, S ∗ = I + sin φ n ∗ + (1 − cos φ) n ∗ n ∗ are the components ∗ of the rotation tensor resolved in basis B , and the above result then provides the transformation rule for the components of the rotation tensor. This transformation rule is, as expected, the rule that characterizes the transformation of components of second-order tensors, see eq. (4.29). Hence, the tensorial nature of the rotation tensor is established. The proof of the tensorial nature of the rotation tensor rests on the deſnition of the rotation tensor provided by Rodrigues’ rotation formula, eq. (4.15), and on the tensorial nature of the unit vector about which the rotation is taking place, expressed as n ¯ = Rn ¯ ∗ . Consequently, the deſnition of the rotation tensor by Rodrigues’ rotation formula guarantees the following equivalence S = R S ∗ RT ⇐⇒ n ¯ = Rn ¯∗.
(4.31)
The components of the ſrst-order tensor, unit vector n ¯ , transform according to eqs. (4.27), and the components of the second-order tensor, S, transform according to eqs. (4.29). Example 4.3. Canonical basis for the rotation tensor In section 4.7, the following orthonormal basis was introduced E = (¯ n, u ¯, v¯),
(4.32)
4.8 Change of basis operations
119
where u ¯ and v¯ are mutually orthogonal unit vectors in the plane normal to n ¯ . Such basis is called a canonical basis for the rotation tensor, R. Let S be the rotation tensor that brings basis I to basis E; the components of this tensor resolved in basis I are S [I] = (¯ n[I] , u ¯[I], v¯[I] ). Because the rotation tensor is a second-order tensor, eq. (4.15) yields its components in basis E as R[E] = S [I]T R[I] S [I] ¯ [I] , cos φ u = S [I]T n ¯[I] + sin φ v¯[I] , − sin φ u ¯[I] + cos φ v¯[I] . Finally, the components of the rotation tensor in the canonical basis become ⎤ ⎡ 1 0 0 [E] (4.33) R = ⎣0 cos φ − sin φ ⎦ . 0 sin φ cos φ In this canonical form, the rotation tensor takes the expected form of the direction cosine matrix for a planar rotation, see eq. (4.4). When resolved in the same canonical basis, the components of rotation tensor G deſned by eq. (4.20) become ⎤ ⎡ 1 0 0 (4.34) G[E] = ⎣0 cos φ/2 − sin φ/2 ⎦ . 0 sin φ/2 cos φ/2 In this canonical form, rotation tensor G takes the expected form of the direction cosine matrix for a planar rotation of half angle, φ/2. 4.8.3 Tensor operations Sections 4.8.1 and 4.8.2 give formal deſnitions of ſrst- and second-order tensors. For completeness of the discussion, a formal deſnition of zeroth order tensors is also given. Deſnition 4.3 (Zeroth order tensor). A zeroth order tensor is a mathematical entity that remains invariant under a change of basis operation. Take, for instance, the mass of a particle. This scalar quantity is invariant under a change of basis operation and hence, is a zeroth order tensor. The length of a vector or the angle between two vectors are two other examples of scalar quantities that remain invariant under a change of basis and hence, are also zeroth order tensor. Chapter 1 deſnes a number of operations between vectors: the scalar product, the vector product and the tensor product, among others. A tensor operation is an operation using two or more tensors and resulting in another tensor. As a ſrst example of a tensor operation, consider the differential work deſned in eq. (3.8) as the scalar product of the force vector by the differential displacement of its point of application, dW = F T dr. Two analysts working with two
120
4 The geometric description of rotation
different bases, B and B ∗ , will write this differential work as dW = F T dr and dW ∗ = F ∗T dr∗ , respectively. The three numbers, F , representing the force vector in basis B are different from the three numbers, F ∗ , representing the same force vector in basis B ∗ . Similarly, the numbers representing the components of the differential displacement vector resolved in the two bases, dr and dr∗ , differ. Because the force and differential displacement vectors are ſrst-order tensors, their components in the two bases are related by eq. (4.27), i.e., F ∗ = RT F and dr ∗ = RT dr, respectively. It then follows that dW ∗ = F ∗T dr ∗ = F T R RT dr = F T dr = dW.
(4.35)
This well known results stems from the orthogonality of the rotation tensor, eq. (4.26). Because dW ∗ = dW , the differential work is a zeroth order tensor, i.e., a quantity that remains invariant under a change of basis. The same conclusion can be reached by looking at the deſnition of the scalar product, eq. (1.8), dW = F dr cos(F , dr) = F ∗ dr∗ cos(F ∗ , dr ∗ ) = dW ∗ . In this case, the invariance of the differential work under a change of basis stems from the fact that the length of a vector and the angle between two vectors are zeroth order tensors. In summary, the scalar product is an operation based on two ſrst-order tensors, which produces a zeroth order tensor. This proves that the scalar product is a tensor operation. While this proof seems rather technical, it has fundamental physical implications. Because the differential work is obtained from a scalar product, i.e., from a tensor operation, it is invariant under a change of basis and hence, is a physically meaningful quantity. Indeed, if the value of the differential work were to depend on the basis in which the force and differential displacement vectors are resolved, this quantity would have no physical meaning because two analysts using two different bases to represent the same vectors would ſnd two different values of the differential work. A second example of tensor operation is the moment of a force, deſned as the vector product of the position vector of the point of application of a force by the force vector itself, M = rF . Two analysts working with two different bases, B and B ∗ , will write this moment as M = rF and M ∗ = r∗ F ∗ , respectively. Here again, because the position and force vectors are ſrst-order tensors, their components in the two bases are related by eq. (4.27), i.e., r ∗ = RT r and F ∗ = RT F . The components of the moment are as follows, T M ∗ = r∗ F ∗ = R r RT F = RT rR RT F = RT rF = RT M ,
(4.36)
where eq. (4.30) and the property of orthogonality of the rotation tensor were used. The result of the vector product operation is a quantity, M , whose components obey the rules of transformation for ſrst-order tensors, eq. (4.27), M ∗ = RT M ; hence, the vector product is a tensor operation. The same conclusion can be reached by looking at the deſnition of the vector product, eq. (1.20), M = r F sin(r, F ) n ¯ = r ∗ F ∗ sin(r ∗ , F ∗ ) R n ¯∗ = ∗ R M . This is a tensor operation because the length of a vector and the angle between
4.8 Change of basis operations
121
two vectors are invariant under a change of basis. Furthermore, unit vector n ¯ , normal to vectors r and F , is a ſrst-order tensor, implying the following transformation rule for its components, n ¯ = Rn ¯∗. In summary, the vector product is an operation based on two ſrst-order tensors, which produces a ſrst-order tensor. This proves that the vector product is a tensor operation. As a corollary, the moment of a force, the vector product of the position vector of the point of application of a force by the force vector itself, is a physically meaningful quantity because its a ſrst-order tensor. It is left to the reader to verify that the various operations deſned in chapter 1 are indeed tensor operations, i.e., operations that are invariant under a change of basis, see problem 4.7. As a last example, consider the product of a zeroth order by a ſrstorder tensor, which deſnes the linear momentum vector, p = mv. The mass of the particle is a zeroth order tensor and its inertial velocity a ſrst-order tensor, implying v ∗ = RT v. It then follows that p∗ = mv ∗ = mRT v = RT mv = RT p.
(4.37)
Because the components of the linear momentum obey the rules of transformation for ſrst-order tensors, eq. (4.27), it is a ſrst-order tensor and hence, the product of a zeroth order by a ſrst-order tensor is a tensor operation. It follows that the linear momentum is a physically meaningful quantity. 4.8.4 The concept of tensor analysis Zeroth-, ſrst-, and second-order tensors are mathematical entities whose components resolved in different bases transform according to strict rules. Manipulation of tensors through tensor operations lead to new tensors. For instance, the vector product of the position vector of the point of application of a force by the force vector itself produces a new vector, the moment of the force. These is a rather abstract mathematical concepts have important physical implications. In fact, the use of tensors expresses the invariance of the laws of physics with respect to change of basis operations [3]. Consider, for instance, Newton’s second law, which states that the force and acceleration vectors must be parallel to each other and the ratio of their lengths must equal the mass of the particle. Clearly, Newton’s second law is invariant under a change of basis. Indeed, the condition of parallelism between the force and acceleration vectors is invariant under a change of basis. Furthermore, because the mass of the particle and the length of the force and acceleration vectors are three invariant quantities, the equality of the length ratio with the particle’s mass is also invariant under a change of basis. Using the vector formalism, Newton’s second law is written as F = ma. This law involves three tensors: a zeroth order tensor, the particle’s mass, and two ſrst-order tensors, the externally applied force vector and the particle’s acceleration vector. Furthermore, Newton’s second law uses tensor operations only: the product of the mass by the acceleration vector is indeed a tensor operation, the product of a zeroth order by a ſrst-order tensor, see eq. (4.37). The combined use of tensor quantities and
122
4 The geometric description of rotation
tensor operations guarantees the invariance of Newton’s second law under change of basis operations. Two analysts working with two different bases, B and B ∗ , will write Newton’s second law as F = ma and F ∗ = ma∗ , respectively. Yet both analysts express the same physical law: the force and acceleration vectors must be parallel and the ratio of their lengths must equal the mass of the particle. In summary, the laws of physics should be expressed in terms of tensors exclusively and should only involve tensor operations. When these two conditions are met, the invariance of the laws of physics under a change of basis is achieved. 4.8.5 Problems Problem 4.4. Geometric interpretation of tensor Prove eq. (4.19), where G is given by eq. (4.20). Give the geometric interpretation of this result.
Problem 4.5. Orthogonality of the rotation tensor Prove the orthogonality of the rotation tensor, eq. (4.26), based on its expression based on Euler theorem, eq. (4.15).
Problem 4.6. Base transformation for skew symmetric tensor
Prove eq. (4.30). Hint: remember that the rotation tensor is orthogonal, R−1 = RT .
Problem 4.7. Tensor operations (1) Prove that the product of a zeroth order tensor by a ſrst-order tensor is a tensor operation. (2) Prove that the product of a zeroth order tensor by a second-order tensor is a tensor operation. (3) Prove that the tensor product of two vectors, eq. (1.28), is a tensor operation. (4) Prove that the mixed product of three vectors is a tensor operation. (5) Let A be a second-order tensor and let A and A∗ its components in two bases, B and B∗ . Prove that the eigenvalues of A and A∗ are identical and that the eigenvectors of A are ſrst-order tensors.
Problem 4.8. Tensors R and G The components of rotation tensor R resolved in basis I are given as follows, ⎡ ⎤ 0.6272 −0.7305 0.2700 [I] R = ⎣−0.1268 −0.4379 −0.8900⎦ . 0.7684 0.5240 −0.3673 (1) Find the components of tensor G in the same basis such that R[I] = G[I] G[I] . (2) Verify that your answer is correct by evaluating the product G[I] G[I] .
Problem 4.9. Components of a vector in two bases Rotation tensor R brings basis I to basis E. The components of tensor R and vector a, both resolved in basis I, are given as follows, ⎫ ⎧ ⎡ ⎤ 0.2944 0.9433 −0.1536 ⎨ 7.54⎬ R = ⎣−0.9005 0.2199 −0.3751⎦ , a = −3.44 . ⎭ ⎩ −0.3200 0.2488 0.9142 1.77 (1) Find the components of vector a in basis E , denoted a∗ , as a∗ = RT a. (2) Verify that a∗ = R T aR.
4.8 Change of basis operations
123
Problem 4.10. Relationship among unit vectors of a basis The rotation tensor can be written as R = [¯ e1 , e¯2 , e¯3 ], where e¯1 , e¯2 , and e¯3 form an orthonormal basis. Show that e1 = e¯3 e¯T2 − e¯2 e¯T3 , e¯1 e¯T1
+
e¯2 e¯T2
+
e2 = e¯1 e¯T3 − e¯3 e¯T1 , e¯3 e¯T3
e3 = e¯2 e¯T1 − e¯1 e¯T2 ,
(4.38a) (4.38b)
= I.
Problem 4.11. Analysis of the projection operator Prove that the projection operator deſned in example 1.5 is a second-order tensor.
Problem 4.12. Analysis of the reƀection operator Prove that the reƀection operator deſned in problem 1.12 is a second-order tensor.
Problem 4.13. Rotation tensor in canonical form
(1) Compute the components of tensor R[E] in the canonical basis, E , deſned by eq. (4.32), i.e., verify eq. (4.33). (2) Compute the eigenvalues of R[E] , i.e., verify eq. (4.25).
Problem 4.14. Square root of rotation tensor (1) Compute the components of tensors R and G in the canonical basis, E , deſned by eq. (4.32), denoted R[E] and G[E] , respectively. (2) Verify eq. (4.19) by checking that R[E] = G[E] G[E] . (3) Find the kth root of the rotation tensor R, denoted Gk . Discuss the geometric meaning of this tensor.
Problem 4.15. Orthogonality in canonical form Verify the orthogonality property of the rotation tensor, R RT = I, by ſrst computing the components of R in the canonical basis, E, deſned by eq. (4.32), denoted R[E] , then checking that R[E] R[E]T = I.
Problem 4.16. Multiplicative decomposition of the rotation tensor Consider three rotation tensors, R, R1 , and R2 , corresponding to rotations of magnitude φ, ηφ, and (1 − η)φ, respectively, about the same unit vector, n ¯ , where η ∈ [0, 1]. Prove that R = R1 R2 = R2 R1 . Hint: write the three rotation tensors in their common canonical basis.
Problem 4.17. Properties of rotation tensors R and G Prove the following relationships. (R − I)(R + I)−1 = (R + I)−1 (R − I) = n tan φ/2, (G − I)(G + I)
−1
T −1
(I − R )(I + R ) T
T −1
(I − G )(I + G ) T
= (G + I)
−1
(G − I) = n tan φ/4,
(4.39a) (4.39b)
T −1
(I − R ) = n tan φ/2,
(4.39c)
T −1
(I − G ) = n tan φ/4.
(4.39d)
= (I + R )
= (I + G )
T
T
Problem 4.18. Multiplicative decomposition of rotation tensors R and G Prove the following relationships. R = (I − α n)−1 (I + α n) = (I + α n)(I − α n)−1 , n) G = (I − β
−1
(I + β n) = (I + β n)(I − β n)
−1
,
α = tan φ/2,
(4.40a)
β = tan φ/4.
(4.40b)
124
4 The geometric description of rotation
Problem 4.19. Properties of rotation tensors R and G Prove the following relationships. n) = 2I, (R + I)(I − α
α = tan φ/2,
(4.41a)
(G + I)(I − β n) = 2I,
β = tan φ/4.
(4.41b)
Problem 4.20. Properties of rotation tensors R and G Prove the following relationships. (R + I)−1 + (RT + I)−1 = I, (G + I)
−1
T
+ (G + I)
−1
(4.42a) (4.42b)
= I.
4.9 Composition of rotations Figure 4.7 shows three orthonormal bases, B 1 = (¯ı11 , ¯ı12 , ¯ı13 ), B 2 = (¯ı21 , ¯ı22 , ¯ı23 ), and B 3 = (¯ı31 , ¯ı32 , ¯ı33 ). Let i2 3 B the rotations of magnitude φ1 about a unit vector n ¯ 1 and 2 2 i i2 of magnitude φ2 about a unit vector n ¯ 2 , represented by R2 3 tensors R1 and R2 , respectively, express the rotations 3 i1 B2 from basis B 1 to B 2 and from basis B 2 to B 3 , respeci31 R tively. R1 i12 Application of the rotation operation, eq. (4.14), yields ¯ı21 = R1¯ı11 and ¯ı31 = R2¯ı21 . Eliminating ¯ı21 from 1 1 1 i1 B i2 these two expressions leads to ¯ı31 = R2 R1¯ı11 = R ¯ı11 , Fig. 4.7. Composition of ro- where R = R2 R1 is the rotation tensor that brings basis B 1 to B 3 . The operation that combines two rotations, tations. that from basis B 1 to B 2 and that from basis B 2 to B 3 , into a single rotation from basis B 1 to B 3 is called composition of rotations, a concept that was first addressed by Rodrigues [18]. Mathematically, the composition of two rotations is expressed by the multiplication of the corresponding rotation tensors. Finite rotations do not form a linear space: the expression “composition of finite rotation” is used to underline the fact these quantities are not additive. The tensor relationship, R = R2 R1 , can be resolved in any basis, in particular bases B 1 and B 3 , to find 3
i3
3
1
3
1
1
3
3
] [B ] R1 = R2[B ] R1[B ] . R[B ] = R[B ] = R[B 2
(4.43)
where eq. (4.28) was used to obtain the first equality. It is often convenient to resolve rotation tensor R2 in basis B 2 . The secondorder tensor component transformation law, eq. (4.29), relates the components of 1 1 ] [B2 ] [B1 ]T this tensor resolved in the two bases as R2[B ] = R[B R2 R1 . Introducing this 1 transformation into eq. (4.43) yields the additional result 1
3
1
2
R[B ] = R[B ] = R1[B ] R2[B ] .
(4.44)
4.9 Composition of rotations
125
Hence, the total rotation R from B 1 to B 3 can be expressed in two alternative ways 1
3
1
1
1
2
] [B ] R[B ] = R[B ] = R[B R1 = R1[B ] R2[B ] . 2
(4.45)
Note that the order in which the rotation tensors appear depends on the basis in which they are resolved. Example 4.4. Euler angles In section 4.4, Euler angles were deſned as the magnitudes of three successive planar rotations describing an arbitrary rotation, as illustrated in ſg 4.4. Considering the 3-1-3 sequence, rotation tensor Rφ rotates basis I to basis A, next, tensor Rθ brings basis A to basis B, and ſnally, tensor Rψ rotates basis B to E. The operations ¯1 , and e¯1 = R ¯b1 . Eliminating the can be summarized as: a ¯1 = R ¯ı1 , ¯b1 = R a φ
θ
ψ
intermediate bases then yields e¯1 = Rψ Rθ Rφ¯ı1 = R ¯ı1 , where R is the tensor that brings basis I to E. The statement R = Rψ Rθ Rφ is a tensor relationship that is true when expressed in any basis, provided that all tensors are resolved in the same basis; for instance, one could write R[I] = R[I] R[I] R[I] . In this expression, Rφ represents a planar rotation ψ θ φ and the components of this tensor resolved in basis I, denoted R[I] , are in the form φ of the direction cosine matrix given by eq. (4.6). Tensor Rθ also represents a planar
, are not of the form rotation, but its components resolved in basis I, denoted R[I] θ of a direction cosine matrix as given in eq. (4.4). However, the components of this tensor resolved in basis A, denoted R[A] , would be of the form given in eq. (4.4). θ The same remarks can be made about tensor Rψ : its components in basis B, denoted
R[B] , are of the form of the direction cosine matrix for a planar rotation as given by ψ eq. (4.6), whereas its components in basis I, denoted R[I] , are not. ψ The above discussion indicates that the evaluation of rotation tensor R will be easier if the tensor relationship R = Rψ Rθ Rφ is expressed in component form as R[I] = R[I] R[A] R[B] , a recursive application of eq. (4.44). This yields φ θ ψ R
[I]
⎤⎡ ⎤⎡ ⎡ cos ψ − sin ψ 0 cos φ − sin φ 0 1 0 = ⎣ sin φ cos φ 0⎦ ⎣0 cos θ − sin θ ⎦ ⎣ sin ψ cos ψ 0 0 0 0 1 0 sin θ cos θ
⎤ 0 0⎦ . 1
Performing the triple matrix multiplication yields the components of the rotation tensor in basis I; the result yields the entries of the direction cosine matrix deſned in eq. (4.74), as expected from eq. (4.18). Example 4.5. Time-dependent motion of a rigid body Consider a rigid body moving in three-dimensional space. In many computational schemes, it is necessary to track down the motion of the body by determining its actual position and orientation in space at various instants in time, as depicted in ſg. 4.8.
126
4 The geometric description of rotation
a3
e3 B0
e2 F
F
ui, Ri
E
x0, R 0
F O
a2
a1 I
i2
b3
u, R
Bi
i3
e1
A
b1
Bf B
b2
r, S
i1 Fig. 4.8. Time-dependent motion of a rigid body.
The following frames will be used in this problem: F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )], is an inertial frame, F E = [B0 , E = (¯ e1 , e¯2 , e¯3 )], a body attached frame that deſnes the conſguration of the rigid body in its reference conſguration (say at time t = 0), F A = [Bi , A = (¯ a1 , a ¯2 , a ¯3 )], a bodyattached frame that deſnes the conſguration of the body at ti , and ſnally F B = Bf , B = (¯b1 , ¯b2 , ¯b3 ) , a body attached frame that deſnes the conſguration of the body at tf . Typically, ti and tf would be the initial and ſnal times, respectively, for a time step of the computation that proceeds in an incremental manner. The position vector of point B0 of the rigid body with respect to point O is denoted x0 , and the orientation of the body is determined by rotation tensor R0 that brings basis I to basis E. Next, the position vector of point Bi with respect to point B0 is denoted ui and the corresponding orientation of the body is determined by rotation tensor Ri that brings basis E to basis A. Note that ui and Ri deſne the conſguration of the rigid body at time ti relative to that at time t = 0. The conſguration of the body with respect to the inertial frame would have to be obtained from a composition of the partial displacements and rotations. Finally, the incremental motion of the body from time ti to tf is deſned by position vector u of point Bf with respect to point Bi and rotation tensor R that brings basis A to basis B. Determine the inertial position and orientation of the body at time tf . The inertial position of the body is readily found by adding the various displacements to ſnd r = x0 + ui + u. This vector equation can be resolved in any basis, for instance the inertial basis. The various bases are related to each other through the corresponding rotation tensors: e¯1 = R0¯ı1 , a ¯1 = Ri e¯1 , and ¯b1 = R a ¯1 . Eliminating the intermediate bases ¯ yields b1 = R Ri R0¯ı1 = S ¯ı1 , where S = R Ri R0 is the rotation tensor that brings basis I to basis B. This tensor relationship can be expressed in component form as follows: S [I] = R[I] R[I] R[I] , where all tensors have been expressed in a common i 0 basis I, see eq. (4.43). It is sometimes more convenient to express each rotation tensor in the local basis; in that case eq. (4.44) yields: S [I] = R[I] Ri[E] R[A] . Note the reversing of the order 0 of the individual rotations depending of the basis in which the tensors are expressed. This behavior is a consequence of the nonlinear nature of rotation operations.
4.9 Composition of rotations
127
The operation of composing displacements corresponds to a simple addition of vectors. In contrast, the corresponding operation for rotations is far more complex: rotations cannot be added by simply adding “rotation vectors.” Rather, the components of the corresponding rotation tensors are multiplied, and the order in which the tensors appear depends on the bases in which their components are resolved. This fundamental difference is reƀected in the vocabulary: displacement vectors are added, rotations are composed. 4.9.1 Problems Problem 4.21. Sequence of rotations
Consider a sequence of n orthonormal bases denoted B1 , B2 , . . . Bk , . . . Bn . Let rotation tensor Rk deſne the rotation from Bk to Bk+1 . Rotation tensors Rk , k = 1, 2, . . . n − 1, then deſne the successive rotations between these bases. (1) Prove the following tensor relationship R = Rn−1 Rn−2 . . . R2 R1 , where rotation tensor R deſnes the rotation from basis B1 to basis Bn . (2) Prove that R[B
R[B
1
]
= R[B
n
]
1
2
n−2
= R1[B ] R2[B ] . . . R[B n−2
]
1
]
= R[B n−1
[B Rn−1
]
n
]
1
1
1
1
[B ] [B ] = Rn−1 Rn−2 . . . R2[B ] R1[B ] , and
.
Problem 4.22. Composition of rotations
Consider three orthonormal bases B, B0 , and B∗ . Let rotation tensor R0 describe the rotation from basis B to B0 and R that from basis B0 to B∗ . The components of tensors R0 and R resolved in basis B are ⎡ ⎤ ⎡ ⎤ 0.3258 −0.9377 −0.1212 0.2944 0.9433 −0.1536 R[B] = ⎣0.8683 0.3474 −0.3540⎦ , R[B] = ⎣−0.9005 0.2199 −0.3751⎦ . 0 0.3740 0.0101 0.9274 −0.3200 0.2488 0.9142 ∗
] Let Ri = R R0 . Prove the following relationships: (1) R[B] = R[B . (2) R[B] = R[B] R[B] . i i i 0
(3) R[B] = R[B] R[B0 ] . (4) Verify each relationship numerically by performing the matrix i 0 multiplications.
Problem 4.23. Robotic system with spinning disk The system depicted in ſg. 4.9 consists of a shaft of height h rigidly connected to an arm of length La and of a spinning disk of radius R mounted at the free end of the s , s¯ , s¯ ) is attached to the shaft at point S, and frame arm. Frame F S = S, S + = (¯ 1 2 3 F D = C, B∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to the disk at point C. Superscripts (.)+ and (.)∗ indicate components of tensors resolved in bases S + and B∗ , respectively. Angle α(t) and β(t) are the magnitudes of the planar rotations about axis ¯ı3 and s¯1 , respectively, that bring basis I to S + and basis S + to B∗ , respectively. Tensors Rα and Rβ are the rotation tensors associated with those two rotations, and R is the rotation tensor that brings basis I to B∗ . If angles α(t) and β(t) are given, write compact expressions for the following tensor components: (1) Rα , R+ , and R∗α ; (2) Rβ , R+ , and R∗β . (3) Express R in terms of Rα and Rβ , (4) α β . express R in terms of Rα and R+ β
Problem 4.24. Relative rotation at a revolute joint Figure 4.10 depicts two rigid bodies denoted with superscripts (·)k and (·) , respectively, linked together by a revolute joint. In the reference conſguration, the orientation of the rigid
128
4 The geometric description of rotation l
s3 S FS
e2
e2
La
e1
k
l
f
k
e1
+
S
s2
b3 B
s1
C
i3 h
b(t) R
b1 O
i1 a(t)
b2
*
F
R
l
k
e3 = e3
k
k
i3 l
k
R0 = R0 i1
l
e01 = e01
i2
Fig. 4.9. Spinning disk mounted on a rotating arm.
l
k
e02 = e02
Final configuration
I
s1
l
e03 = e03
Rl
k
I
i2
Reference configuration
Fig. 4.10. Revolute joint in the reference and ſnal conſgurations.
bodies is deſned by coincident bases B0k = B0 . In the deformed conſguration, the orientations of the bodies are deſned by two distinct bases Bk and B , respectively. No relative displacement is permitted between the bodies that are allowed to rotate with respect to each other in such a way that e¯k3 = e¯3 . Rotation tensor Rk0 = R0 describes the rotation from I to B0k = B0 , tensor Rk that from B0k to Bk , and tensor R that from B0 to B . If ⎡
⎤ 0.1043 0.5561 0.8245 = ⎣−0.1873 0.8252 −0.5329⎦ ; −0.9767 −0.0989 0.1902 ⎡ ⎤ ⎡ ⎤ 0.6311 −0.7492 0.2010 0.6272 −0.7305 0.2700 [I] = ⎣0.0140 −0.2480 −0.9687⎦ , R = ⎣−0.1268 −0.4379 −0.8900⎦ , 0.7756 0.6141 −0.1460 0.7684 0.5240 −0.3673 R[I] 0
Rk[I]
ſnd the relative rotation, φ, of the revolute joint.
Problem 4.25. Rigid bodies connected by torsional springs Figure 4.11 shows two rigid bodies denoted with superscripts (·)k and (·) , respectively, linked together by torsional springs at a point. In the reference conſguration, the orientation of the rigid bodies is deſned by coincident bases B0k = B0 . In the deformed conſguration, the orientations of the bodies are deſned by two distinct bases Bk and B , respectively. No relative displacement is permitted between the bodies that are allowed to rotate with respect to each other in an arbitrary manner. Rotation tensor Rk0 = R0 describes the rotation from I to B0k = B0 , tensor Rk that from B0k to Bk , and tensor R that from B0 to B . Let R be the rotation tensor from Bk to B . The deformation of the torsional springs will be measured by the following vector ⎫ ⎧ kT e¯ e¯ − e¯kT ¯3 ⎬ 2 e 1 ⎨ 3kT 2 e¯ e¯ − e¯kT ¯1 . s= 3 e 2 ⎩ 1kT 3 ⎭ e¯2 e¯1 − e¯kT e 1 ¯2
4.10 Time derivatives of rotation operations
129
k
(1) Find the relationship between components s[B ] and the components of tensor R resolved in an appropriate basis. Clearly deſne this appropriate basis, and give the components of R in k
that basis. (2) Find the relationship between components s[B ] and the magnitude φ and unit axis n ¯ characterizing the rotation tensor R expressed in the previously deſned basis. k
l
e3
l
e2
e3
k
k
e2
R
B Bk Final configuration
l
e02 = e02
l
e1 l
k
l
e03 = e03
l
R i3
k
e1
k k
l
k
R0 = R0
I i1
i2
l
l
e01 = e01
B = B0 Reference configuration k 0
Fig. 4.11. Rigid bodies linked by torsional springs. For clarity of the ſgure, the reference and ſnal conſgurations have been translated with respect to each other.
4.10 Time derivatives of rotation operations Consider a ſxed orthonormal basis I = (¯ı1 , ¯ı2 , ¯ı3 ) and a time-dependent orthonormal basis E = (¯ e1 , e¯2 , e¯3 ). It is often the case that the orientation of this moving orthonormal basis depend on a scalar variable, say time t. If R(t) is the time-dependent rotation tensor that bring I to E, e¯1 (t) = R(t)¯ı1 . The time derivative of this expres˙ indicates a time derivative. Clearly, R(t) ˙ ı1 , where notation (·) ˙ sion is e¯˙ 1 (t) = R(t)¯ can be evaluated directly by taking a time derivative of the rotation tensor, eq. (4.15). The concept of angular velocity vector, however, considerably simpliſes this operation and will be explored in the next sections. 4.10.1 The angular velocity vector: an intuitive approach Consider a constant norm, time-dependent vector, b(t), and a rotation operation characterized by an instantaneous unit vector, n ¯ (t), and an inſnitesimal rotation, Δφ. Figure 4.12 shows the effect of this inſnitesimal rotation on the orientation of vector b: at time t, its orientation is b(t), at time t + Δt, its orientation is b(t + Δt). Because vector b is of constant norm, it sweeps the outer surface of a cone, whose summit is at the origin and its basis is a circle in a plane normal to n ¯ . The radius of the circle is r = b sin α, where α is the angle between vectors b and n ¯ . The increment in b is Δb = b(t + Δt) − b(t), a vector that lies in a plane normal to n ¯. If Δφ → 0, vector Δb becomes tangent to the circle, and hence, normal to b(t). In this case, Δb is normal to both n ¯ and b(t), and hence, Δb = c n b. The unknown constant, c, can be determined by taking the norm of both sides of this equation to
130
4 The geometric description of rotation
ſnd Δb = cb sin α. Because Δb = rΔφ, it follows that rΔφ = cr, and ſnally c = Δφ. The incremental change in vector b now becomes Δb = Δφ n b. By deſnition, the time derivative of vector b is b(t + Δt) − b(t) Δb Δφ = lim = lim n b = φ˙ n b˙ = lim b. Δt→0 Δt→0 Δt Δt→0 Δt Δt ˙ n is the angular velocity vector; the time derivative of vector b now Vector ω = φ¯ becomes b˙ = ω b. (4.46) This important relationship implies that the time derivative of a constant norm vector equals the vector product of the angular velocity vector by the constant norm vector itself. Clearly, the angular velocity vector will play a fundamental role in computing the time derivatives of vectors.
b(t) a I i1
e3
n
Df
i3
i3
Db
b(t+Dt) O
i2
Fig. 4.12. Rotation of a constant norm vector b.
i1
E
R(t) i2
I
e2
e1
O
Fig. 4.13. Fixed and rotating orthonormal bases.
The above result can also be obtained from eq. (4.14) that describes the rotation an arbitrary vector a. Let φ = 0 and φ = Δφ at time t = 0 and t = Δt, respectively. It follows that b(0) = a and b(Δt) = a + Δφ n a, where higher order terms were neglected. The increment in vector b is then Δb = Δφ n b, a result identical to that obtained above. Clearly, this result is valid for inſnitesimal rotations about φ = 0. If the axis n ¯ about which the rotation is taking place has a constant direction ˙ n = d(φ¯ in time, the angular velocity vector can be written as ω = φ¯ n)/dt, i.e., the angular velocity is the time derivative of vector φ¯ n. The results obtained above, however, are not limited to the case where axis n ¯ is of constant direction. In the ˙ n(t), and because φ(t) and n general case, ω = φ¯ ¯ (t) are independent functions of time, there exist no vector such that its derivative equals the angular velocity vector. The angular velocity vector is a nonholonomic vector, i.e., a vector that cannot be integrated. This contrasts with the expression of the velocity vector of a particle: the position vector is u(t) and the velocity v(t) = u. ˙ In this case, the integral of the velocity vector is the position vector. When it comes to the angular velocity, there exist no vector x such that ω = x. ˙
4.10 Time derivatives of rotation operations
131
4.10.2 The angular velocity vector: a rigorous approach The development presented in the previous section is limited to rotations about φ = 0; consequently, the resulting expressions are not general. In the present section, a rigorous deſnition of the angular velocity vector is derived by considering the timedependent orthonormal basis, E(t) = (¯ e1 , e¯2 , e¯3 ), depicted in ſg. 4.13. Deſnition of the angular velocity vector Because e¯1 is a unit vector e¯T1 e¯1 = 1 and a time derivative of this equation yields e¯T1 e¯˙ 1 = 0, i.e., vectors e¯˙ 1 and e¯1 must be perpendicular to each other. This implies the existence of vector a1 , such that e¯˙ 1 = a1 e¯1 .
(4.47)
To determine a1 , this equation is recast as e1 a1 = −e¯˙ 1 , a vector product equation for unknown vector a1 . In view of eq. (1.35), the solution of this equation is a1 = ω1 e¯1 + e1 e¯˙ 1 , where ω1 is an arbitrary constant; this solution exists because the right-hand side of the equation, −e¯˙ 1 , is orthogonal to the the null space of e1 , i.e., e¯T1 e¯˙ 1 = 0. Vectors e¯2 an e¯3 are also unit vectors and a reasoning similar to that developed above leads to a1 = ω1 e¯1 + e1 e¯˙ 1 , a2 = ω2 e¯2 + e2 e¯˙ 2 , and a3 = ω3 e¯3 + e3 e¯˙ 3 , where ω1 , ω2 , and ω3 are arbitrary constants. The components of vector a1 in the rotating basis E are readily found as e¯T1 a1 = ω1 , e¯T2 a1 = −e¯˙ T1 e¯3 and e¯T3 a1 = e¯˙ T1 e¯2 . A similar reasoning applied to vectors a2 and a3 then leads to a1 =
ω1 e¯1 − (e¯˙ T1 e¯3 ) e¯2 + (e¯˙ T1 e¯2 ) e¯3 ,
(4.48a)
a2 =
(e¯˙ T2 e¯3 ) e¯1 + ω2 e¯2 − (e¯˙ T2 e¯1 ) e¯3 ,
(4.48b)
a3 =
−(e¯˙ T3 e¯2 )
e¯1 +
(e¯˙ T3 e¯1 )
e¯2 + ω1 e¯3 ,
(4.48c)
where the last two equations were obtained by evaluating the components of vectors a2 and a3 in rotating basis E. Unit vectors e¯2 and e¯3 are mutually orthogonal, i.e., e¯T2 e¯3 = 0; a time derivative of this orthogonality condition implies e¯˙ T2 e¯3 = −e¯˙ T3 e¯2 . Since ω1 is arbitrary, it is possible to select ω1 = e¯˙ T2 e¯3 = −e¯˙ T3 e¯2 . The three arbitrary constants are selected as follows, ω1 = e¯˙ T2 e¯3 = −e¯˙ T3 e¯2 ,
ω2 = e¯˙ T3 e¯1 = −e¯˙ T1 e¯3 ,
ω3 = e¯˙ T1 e¯2 = −e¯˙ T2 e¯1 ,
(4.49)
where the last two equations stem from the orthogonality conditions, e¯T1 e¯3 = 0 and e¯T1 e¯2 = 0, respectively. Inspection of eqs. 4.48 and 4.49 then reveals that the three vectors a1 , a2 , and a3 are equal to each other, i.e., a1 = a2 = a3 = ω, where ω = (e¯˙ T2 e¯3 ) e¯1 + (e¯˙ T3 e¯1 ) e¯2 + (e¯˙ T1 e¯2 ) e¯3 .
(4.50)
This relationship provides a formal deſnition of the angular velocity vector. Since the quantities in parentheses are scalar products of vector, the angular velocity vector is indeed a ſrst-order tensor, because it is a linear combination of ſrst-order tensors.
132
4 The geometric description of rotation
Properties of the angular velocity vector The fundamental property of the angular velocity vector is its relationship to the time derivative of an orthonormal basis; indeed, eq. (4.47) now becomes e¯˙ 1 = ω e¯1 ,
e¯˙ 2 = ω e¯2 ,
e¯˙ 3 = ω e¯3 .
(4.51)
Clearly, these results are identical to those obtained in the previous section, see eq. (4.46): the vector product of the angular velocity vector by a constant norm vector yields the time derivative of the vector itself. The concept of angular velocity is associated with the time derivative of orthonormal basis E. Let b be an arbitrary vector attached to basis E, i.e., b = α1 e¯1 + α2 e¯2 + α3 e¯3 , where α1 , α2 , and α3 are time independent constants. The time derivative of this vector then becomes b˙ = α1 e¯˙ 1 + α2 e¯˙ 2 + α3 e¯˙ 3 = ω (α1 e¯1 + α2 e¯2 + α3 e¯3 ) = ω b. The time derivative of any vector attached to basis E is b˙ = ω b, i.e., the angular velocity vector characterizes the time derivative of the angular motion of the basis, not just that of a single unit vector. Because a one to one correspondence exists between the angular motion of an orthonormal basis and that of a rigid body, the angular velocity vector characterizes the time derivative of the angular motion of a rigid body. The following alternative expression, which presents a higher symmetry in the indices, can also be used to deſne the angular velocity vector ω=
1 T (¯ e3 e¯˙ 2 − e¯T2 e¯˙ 3 ) e¯1 + (¯ eT1 e¯˙ 3 − e¯T3 e¯˙ 1 ) e¯2 + (¯ eT2 e¯˙ 1 − e¯T1 e¯˙ 2 ) e¯3 . 2
(4.52)
The components of the angular velocity vector resolved in the rotating basis, E, denoted ω ∗ are ⎫ ⎧ T ⎨e¯3 e¯˙ 2 − e¯T2 e¯˙ 3 ⎬ 1 e¯T e¯˙ 3 − e¯T3 e¯˙ 1 . ω∗ = (4.53) ⎭ 2 ⎩ 1T ˙ e¯2 e¯1 − e¯T1 e¯˙ 2 Relating the angular velocity vector to the rotation tensor Let R be the rotation tensor that bring basis I to basis E; the components of this tensor in basis I are R = [¯ e1 , e¯2 , e¯3 ] and it then follows that ⎡ ⎤ 0 e¯T1 e¯˙ 2 e¯T1 e¯˙ 3 ˙ = ⎣e¯T2 e¯˙ 1 0 e¯T2 e¯˙ 3 ⎦ RT R e¯T3 e¯˙ 1 e¯T3 e¯˙ 2 0 ⎤ ⎡ (4.54) eT1 e¯˙ 3 − e¯T3 e¯˙ 1 ) 0 −(¯ eT2 e¯˙ 1 − e¯T1 e¯˙ 2 ) (¯ 1⎣ (¯ eT2 e¯˙ 1 − e¯T1 e¯˙ 2 ) 0 −(¯ eT3 e¯˙ 2 − e¯T2 e¯˙ 3 )⎦ . = 2 T ˙ T ˙ T ˙ T ˙ −(¯ e1 e¯3 − e¯3 e¯1 ) (¯ e3 e¯2 − e¯2 e¯3 ) 0 Comparing eq. (4.53) and (4.54) then yields ˙ ω ∗ = RT R.
(4.55)
4.10 Time derivatives of rotation operations
133
Because the angular velocity vector is a tensor, its components in the ſxed basis I are then obtained from eq. (4.29) as ˙ RT . ˙ T =R ω = Rω ∗ RT = R(RT R)R
(4.56)
This equation deſnes the angular velocity in terms of the rotation tensor and its time derivative. Since it is a tensor relationship, it is true in all bases, and could be taken as the deſnition of the angular velocity vector, although it more abstract and algebraic than the deſnition given by eq. (4.50), which is rooted in more geometric arguments. The results derived above can be recovered from purely algebraic manipulation. Let R(t) be the time-dependent rotation tensor that brings basis I to basis ˙ ¯ı1 (t) = E(t), e¯1 (t) = R(t)¯ı1 . A time derivative of this expression yields e¯˙ 1 = R T ˙ R R e¯1 (t). A time derivative of the orthogonality property of the rotation tensor, ˙ RT = −(R ˙ RT )T , which shows that tensor R ˙ RT is skew eq. (4.26), leads to R symmetric, as implied by eq. (4.56), which is taken to be the deſnition of the angular velocity vector. The time derivative of unit vector e¯1 then becomes e¯˙ 1 (t) = ω e¯1 (t), as expected from earlier developments. The components of this vector in basis E are now RT e¯˙ 1 (t) = RT ω e¯1 = RT ω R RT e¯1 = ω ∗¯ı1 . Explicit expression of the angular velocity vector The angular velocity vector can be expressed in terms of quantities φ(t) and n ¯ (t) that characterize the rotation. Introducing the rotation tensor, eq. (4.15), into eq. (4.56) and using identity (1.34c) yields ˙ n + sin φ n ω = φ ˙ + (1 − cos φ)( nn ˙ − n ˙ n ).
(4.57)
The angular velocity vector now becomes ω = φ˙ n ¯ + sin φ n ¯˙ + (1 − cos φ) nn ¯˙
(4.58)
˙ n, the result obtained with the simpliſed approach of the Note that for φ = 0, ω = φ¯ previous section. The time derivative of unit vector n ¯ about which the rotation takes place explicitly appears in the rigorous expression of the angular velocity vector. Because eq. (4.58) cannot be integrated in general, the angular velocity vector is a nonholonomic vector. Example 4.6. Angular velocity in terms of Euler angles Find the angular velocity vector expressed in terms of Euler angles and their time derivatives; use the 3-1-3 sequence to deſne the Euler angles. The components of the angular velocity vector resolved in the moving basis will be evaluated ſrst. In section 4.4, the rotation tensor expressed in terms of Euler angles was found to be R[I] = R[I] R[A] R[B] . In the following, the superscripts will φ θ ψ be dropped to simplify the writing. Equation (4.55) then yields ˙ R R +R R ˙ = (R R R )T (R ˙ R +R R R ˙ ) ω ∗ = RT R φ θ ψ φ θ ψ φ θ ψ φ θ ψ ˙ )(R R ) + RT (RT R ˙ )R + (RT R ˙ ). = (Rθ Rψ )T (RTφ R ψ θ θ ψ ψ φ θ ψ ψ
134
4 The geometric description of rotation
˙ represents the angular velocity associated with the ſrst planar rotation of the RTφ R φ 3-1-3 Euler angle sequence. It can be readily evaluated using elementary trigonomet˙ = φ˙ ı[I] . ric formulæ to ſnd RTφ R 3 φ Proceeding in a similar manner with the other terms leads to ω ∗ = [B] T ˙ [A] T ˙ [I] (Rθ Rψ ) (φı3 )(Rθ Rψ ) + Rψ (θ a1 )Rψ + (ψ˙b3 ), and ſnally ˙ ı[I]) + R[B]T (θ¯ ˙ a[A] ) + (ψ˙ ¯b[B] ), ω ∗ = (R[A] R[B] )T (φ¯ 3 1 3 θ ψ ψ
[I]T [B]T [A]T where ¯ı3 = ¯b3 = 0, 0, 1 and a ¯1 = 1, 0, 0 . Performing the matrix multiplications and casting the result in a matrix form leads to ⎧ ⎫ ⎡ ⎤ Sθ Sψ Cψ 0 ⎨ φ˙ ⎬ ω ∗ = H ∗3-1-3 θ˙ , with H ∗3-1-3 = ⎣Sθ Cψ −Sψ 0⎦ . (4.59) ⎩ ˙⎭ C 0 1 θ ψ Operator H ∗3-1-3 is called the tangent operator because it is tangent to the rotation manifold. Of course, the components of the angular velocity vector resolved in the ſxed basis could also be evaluated. Starting from eq. (4.56), the desired components are [I] [I] ˙ ˙ R ¯ı[I] ; in matrix form, this becomes found as ω = φ˙ ¯ı3 + θR ¯ı + ψR φ 1 φ θ 3 ⎧ ⎫ ⎨ φ˙ ⎬ ω = H 3-1-3 θ˙ , ⎩ ˙⎭ ψ
with
H 3-1-3
⎡ ⎤ 0 Cφ Sφ Sθ = ⎣0 Sφ −Cφ Sθ ⎦ . 1 0 Cθ
(4.60)
Sometimes, the angular velocity components of a rigid body are known, or have been computed from dynamical equations of motion. The orientation of the rigid body is then obtained by integration the following kinematical equations ⎧ ⎫ ⎡ ⎤ Cψ 0 Sψ ⎨ φ˙ ⎬ 1 ⎣ Sθ Cψ −Sθ Sψ 0 ⎦ . ω ∗ , with H ∗−1 = θ˙ = H ∗−1 3-1-3 3-1-3 ⎩ ˙⎭ Sθ −Cθ Sψ −Cθ Cψ Sθ ψ ⎧ ⎫ ⎨ φ˙ ⎬ ω, θ˙ = H −1 3-1-3 ⎩ ˙⎭ ψ
⎤ −Sφ Cθ Cφ Cθ Sθ 1 ⎣ Cφ Sθ Sφ Sθ 0 ⎦ . = Sθ Sφ −Cφ 0 ⎡
with
H −1 3-1-3
These relationships become singular when Sθ = 0; as was noted in section 4.4, singularities occurs when using Euler angles to represent rotations, for all possible sequence choices. Because ω ∗ = RT ω, it follows that R H ∗3-1-3 = H 3-1-3 , or R = H 3-1-3 H ∗−1 . 3-1-3
4.10 Time derivatives of rotation operations
135
4.10.3 The addition theorem Consider now the problem of two time-dependent bases rotating with respect to an inertial frame of reference, I. The ſrst basis is denoted E ∗ = (¯ e1 , e¯2 , e¯3 ) and the second B = (¯b1 , ¯b2 , ¯b3 ), as depicted in ſg. 4.14. Rotation tensor R1 brings basis I to basis E ∗ , and tensor R2 brings E ∗ to B. Clearly, the instantaneous orientation of bab2 e3 sis B with respect to basis I is a function of R2(t) * both tensors R1 and R2 . Similarly, the angular B e1 E i3 velocity of basis B with respect to I depends on b3 e2 the angular velocities of both bases E ∗ and B. b1 If the components of tensors R1 and R2 are R1(t) i2 resolved in basis I, I i1 ¯b1 = R R ¯ı1 = R RT R R ¯ı1 = R R∗¯ı1 , 2 1 1 1 2 1 1 2 Fig. 4.14. Two time-dependent bases, E and B.
where R∗2 are the components of tensor R2 resolved in basis E , see eq. (4.29). Superscript (·)∗ is used here to indicate tensor components resolved in basis E ∗ . The time derivative of unit vector ¯b1 now becomes ∗
¯b˙ 1 = (R ˙ R∗ + R R ˙ RT + R R ˙ ∗ )(R R∗ )T ¯b1 = (R ˙ ∗ R∗T RT )¯b1 . 1 1 2 1 2 1 2 1 1 1 2 2
(4.61)
The ſrst term of the last equality is the angular velocity of basis E ∗ with respect ˙ RT ). The components of this angular velocity to basis I, denoted ω 1 = axial(R 1 1 ˙ ∗ R∗T ) are the components of vector are resolved in basis I. Next, ω∗2 = axial(R 2 2 the angular velocity vector of basis B with respect to basis E ∗ , resolved in E ∗ . The second term of the last equality involves the components of the angular velocity vector, ω 2 = R1 ω∗2 , of basis B with respect to basis E ∗ , resolved in basis I, because ˙ ∗ R∗T RT = R ω R1 R ∗ RT = R1 ω∗2 = ω 2 . 1 2 2 1 2 1 The derivative of the unit vector, eq. (4.61), now reduces to ¯b˙ 1 = ( ω1 + ω 2 )¯b1 = ω ¯b1 , where ω = ω 1 + ω2 . (4.62) Vector ω is the angular velocity of basis B with respect to I. This result is know as the addition theorem. Theorem 4.2 (Addition theorem). The angular velocity of basis B with respect to basis I is the sum of the angular velocities of basis A with respect to I and of basis B with respect to A, where A is an arbitrary basis. The angular velocity of basis B with respect to I is ω = ω 1 + ω2 , where ω1 is the angular velocity of basis E ∗ with respect to basis I, and ω 2 is the angular velocity of basis B with respect to basis E ∗ . This is a tensor relationship can be expressed in [I] [I] [B] [B] any basis; for instance, ω [I] = ω 1 + ω 2 or ω [B] = ω1 + ω 2 . It would appear that angular velocity vector ω 2 is more naturally resolved in basis E ∗ ; its components are then denoted ω ∗2 . It is clearly incorrect, however, to write
136
4 The geometric description of rotation
ω = ω1 + ω∗2 , because it is wrong to add the components of two vectors resolved in different bases. In many applications, the angular velocity of the second basis will be deſned by its components in that basis, ω ∗2 ; in that case, the addition theorem states ω = ω 1 + R1 ω∗2 . In applications of the addition theorem, it is important to correctly identify and evaluate the angular velocities of the two bases at hand. For instance, it would be ˙ RT . incorrect to believe that the angular velocity of basis B with respect to E ∗ is R 2 2 Indeed, because R2 = R1 R∗2 RT1 , it follows that ˙ RT = (R ˙ R∗ RT + R R ˙ ∗ RT + R R∗ R ˙ T )(R R∗ RT )T R 2 2 1 2 1 1 2 1 1 2 1 1 2 1
˙ RT + R R ˙ T R (R R∗ )T ˙ ∗ R∗T RT + (R R∗ )R =R 1 1 1 1 1 1 2 2 1 2 1 2 ˙ T R (R R )T =ω 1 + R1 ω 2∗ RT1 + (R2 R1 )R 1 1 2 1 T
˙ RT = ω =ω 1 + ω 2 + R2 R1 R 1 + ω 2 + R2 ω 1T RT2 1 2 =ω 2 + (I − R2 )ω 1 . ˙ RT = ω Clearly, R 2 . This is due to the fact that although R2 is the rotation tensor 2 2 that rotates basis E ∗ to basis B, the components of this tensor are resolved in basis I. The components of the angular velocity of basis B with respect to basis E ∗ , resolved ˙ ∗ R∗T ), because R∗ are the components of the rotation tensor in E ∗ , are ω ∗2 = axial(R 2 2 2 that rotates basis E ∗ to basis B, resolved in basis E ∗ . Example 4.7. Angular velocity in terms of Euler angles In section 4.4, Euler angles were deſned as the magnitudes of three successive planar rotations that produce an arbitrary rotation, as shown in ſg 4.4. In example 4.6, expressions were derived for the components of the angular velocity vector in terms of Euler angles and their time derivatives. Derive these expressions using the addition theorem. According to this theorem, the angular velocity of basis E with respect to basis I is simply ω = ω φ + ω θ + ωψ , where ω φ is the angular velocity associated with the planar rotation that brings basis I to basis A, ωθ that associated with the planar rotation from basis A to B, and ωψ that associated with the planar rotation from basis B to E. It follows that ω∗ = ω [E] = ω φ + ωθ + ωψ ; while correct, this expression is not convenient to use because the partial angular velocities are all expressed in the same basis, E. Using the rules of transformation for the components of ſrst-order tensors, [A] [B] [E] eq. (4.27), yields ω ∗ = (R[A] R[B] )T ω φ + R[B]T ωθ + ωψ . Because each partial θ ψ ψ [A] [I] ˙ ı[I] , ω [B] = ω [A] = θ¯ ˙a[A] , rotation is a planar rotation, it is clear that ω = ω = φ¯ [E]
[E]
φ
[E]
φ
3
θ
θ
1
[B] ˙ ı[I] )+R[B]T (θ¯ ˙ a[A] )+(ψ˙ ¯b[B] ). = = ψ˙ ¯b3 , and ſnally, ω∗ = (R[A] R[B] )T (φ¯ 3 1 3 θ ψ ψ This expression is identical to that found in example 4.6. [E] ωψ
[B] ωψ
4.11 Euler angle formulas
137
4.10.4 Angular acceleration The angular velocity vector enables the evaluation of the derivative of a unit vector, see eq. (4.51). The second derivative of a unit vector then becomes ˙ e¯1 + ω e¯˙ 1 = ω ˙ e¯1 + ω ω e¯1 = (ω ˙ + ω ω )¯ e1 . e¨¯1 = ω
(4.63)
The angular acceleration vector is deſned as α = ω; ˙ it then follows that α+ω ω )¯ e1 . e¨¯1 = (
(4.64)
Consider now the problem of two time-dependent bases rotating with respect to an inertial frame of reference, I, as depicted in ſg. 4.14. The addition theorem, eq. (4.62), implies ¯b˙ 1 = ω ¯b1 , where ω = ω1 + ω2 . The second derivative of the unit vector now becomes ¨¯b1 = ( α+ω ω )¯b1 , where the angular acceleration of basis B with respect to basis I is α = ω˙ 1 + ω˙ 2 . (4.65) This result corresponds to the addition theorem for angular acceleration, and echoes the corresponding result for angular velocities, eq. (4.62). The angular acceleration of basis B with respect to I is α = ω˙ = ω˙ 1 + ω˙ 2 , where ω 1 is the angular velocity of basis E ∗ with respect to basis I and ω 2 is the angular velocity of basis B with respect to basis E ∗ . This tensor relationship is true in any [I] [I] [B] [B] basis, α[I] = ω˙ 1 + ω˙ 2 or α[B] = ω˙ 1 + ω˙ 2 . Of course, it would be incorrect ∗ ∗ to write α = ω˙ 1 + ω˙ 2 , where notation (·) indicates tensor components resolved in basis E ∗ , because it is wrong to add the components of two vectors resolved in different bases. If the angular acceleration is to be written in terms of ω∗2 , the following expression should be used instead α = ω˙ 1 + (R1 ω∗2 )· = ω˙ 1 + R1 ω˙ ∗2 + ω 1 R1 ω∗2 .
4.11 Euler angle formulas This section gives a summary of formulas used for the manipulation of rotation operations expressed in terms of Euler angles. As mentioned in section 4.4, twelve different sequences of planar rotations can be used to express an arbitrary rotation; of those twelve possible sequences, the four sequences starting with a rotation about the third axis will be detailed in this section. Arbitrary rotations from basis I = (¯ı1 , ¯ı2 , ¯ı3 ) to basis E = (¯ e1 , e¯2 , e¯3 ) will be considered, with two intermediate bases, A = (¯ a1 , a ¯2 , a ¯3 ) and B = (¯b1 , ¯b2 , ¯b3 ). The complete sequence of bases is as follows: I → A → B → E. The three Euler angles are denoted q1 , q2 , and q3 , and the array of Euler angles is then q T = q1 , q2 , q3 . For each sequence, the following information is given. 1. The matrix of direction cosines expressed in terms of the Euler angles, D = D(q). See section 4.4 and eq. (4.11) for the 3-1-3 sequence.
138
4 The geometric description of rotation
2. The Euler angles expressed in terms of the components of the direction cosine matrix, q1 = q1 (D), q2 = q2 (D), and q3 = q3 (D). See section 4.4 and eq. (4.12) for the 3-1-3 sequence. For computer implementation, it is convenient to use the function φ = atan2(sin q, cos q) that deſnes angle φ ∈ [−π, π]. 3. The tangent operators, H(q) and H ∗ (q), which express the components of the angular velocity vector resolved in basis I and E, respectively, in terms of the time derivatives of the Euler angles, i.e., ω = H(q)˙q and ω ∗ = H ∗ (q)˙q , respectively. See example 4.6 and eqs. (4.60) and (4.59), respectively, for the 3-1-3 sequence. 4. The inverses of the tangent operators are also given. 4.11.1 Euler angles: sequence 3-1-3 Euler angles with the 3-1-3 sequence are deſned as follows. 1. A planar rotation of magnitude φ, called precession, about axis ¯ı3 brings I to A. 2. A planar rotation of magnitude θ, called nutation, about axis a ¯1 brings A to B. 3. A planar rotation of magnitude ψ, called spin, about axis ¯b3 brings B to E.
The array of Euler angles is now q T = φ, θ, ψ . 1) The direction cosine matrix is ⎡ ⎤ Cφ Cψ − Sφ Cθ Sψ −Cφ Sψ − Sφ Cθ Cψ Sφ Sθ D3-1-3 = ⎣Sφ Cψ + Cφ Cθ Sψ −Sφ Sψ + Cφ Cθ Cψ −Cφ Sθ ⎦ . (4.66) Sθ Sψ Sθ Cψ Cθ 2) Euler angle expressed in terms of the direction cosine matrix components are ψ = atan2(D31 , D32 ), if D32 = 0, θ = atan2(D31 sin ψ + D32 cos ψ, D33 ),
(4.67)
φ = atan2(D13 , −D23 ). A singularity occurs when θ = 0 or π, . 3) The tangent operators are ⎡ ⎡ ⎤ ⎤ 0 Cφ Sφ Sθ Sθ Sψ Cψ 0 H 3-1-3 = ⎣0 Sφ −Cφ Sθ ⎦ , H ∗3-1-3 = ⎣Sθ Cψ −Sψ 0⎦ , Cθ 1 0 Cθ 0 1
(4.68)
respectively. 4) The inverses of the tangent operators are ⎤ ⎡ ⎡ ⎤ Cψ 0 −Sφ Cθ Cφ Cθ Sθ Sψ 1 ⎣ 1 ⎣ Sθ Cψ −Sθ Sψ 0 ⎦ . (4.69) Cφ Sθ Sφ Sθ 0 ⎦ , H ∗−1 = = H −1 3-1-3 3-1-3 Sθ S θ −C S −C C S Sφ −Cφ 0 θ ψ θ ψ θ
4.11 Euler angle formulas
139
4.11.2 Euler angles: sequence 3-2-3 Euler angles with the 3-2-3 sequence are deſned as follows. 1. A planar rotation of magnitude ψ, called precession, about axis ¯ı3 brings I to A. 2. A planar rotation of magnitude θ, called nutation, about axis a ¯2 brings A to B. 3. A planar rotation of magnitude φ, called spin, about axis ¯b3 brings B to E.
The array of Euler angles is now q T = ψ, θ, φ . 1) The direction cosine matrix is ⎡ ⎤ Cψ Cθ Cφ − Sψ Sφ −Cψ Cθ Sφ − Sψ Cφ Cψ Sθ D3-2-3 = ⎣Sψ Cθ Cφ + Cψ Sφ −Sψ Cθ Sφ + Cψ Cφ Sψ Sθ ⎦ . (4.70) −Sθ Cφ Sθ Sφ Cθ 2) Euler angle expressed in terms of the direction cosine matrix components are φ = atan2( D32 , −D31 ), if D31 = 0, θ = atan2(−D31 cos φ + D32 sin φ, D33 ),
(4.71)
ψ = atan2( D23 , D13 ). It is clear that when θ = 0 or π, a singularity occurs. 3) The tangent operators are ⎡ ⎡ ⎤ ⎤ 0 −Sψ Cψ Sθ −Sθ Cφ Sφ 0 H 3-2-3 = ⎣0 Cψ Sψ Sθ ⎦ , H ∗3-2-3 = ⎣ Sθ Sφ Cφ 0⎦ , Cθ 1 0 Cθ 0 1
(4.72)
respectively. 4) The inverses of the tangent operators are ⎤ ⎡ ⎡ ⎤ −Cψ Cθ −Sψ Cθ Sθ −Cφ Sφ 0 1 1 ⎣ −Sψ Sθ Cψ Sθ 0 ⎦ , H ∗−1 = ⎣ Sθ Sφ Sθ Cφ 0 ⎦ . (4.73) = H −1 3-2-3 3-2-3 Sθ Sθ Cψ Cθ Cφ −Cθ Sφ Sθ Sψ 0 4.11.3 Euler angles: sequence 3-2-1 Euler angles with the 3-2-1 sequence are commonly used in airplane ƀight mechanics formulations and are deſned as follows. 1. A planar rotation of magnitude ψ, called heading, about axis ¯ı3 brings I to A. 2. A planar rotation of magnitude θ, called attitude, about axis a ¯2 brings A to B. 3. A planar rotation of magnitude φ, called bank, about axis ¯b1 brings B to E.
The array of Euler angles is now q T = ψ, θ, φ . 1) The direction cosine matrix is ⎡ ⎤ Cψ Cθ −Sψ Cφ + Cψ Sθ Sφ Sψ Sφ + Cψ Sθ Cφ D3-2-1 = ⎣ Sψ Cθ Cψ Cφ + Sψ Sθ Sφ −Cψ Sφ + Sψ Sθ Cφ ⎦ . (4.74) −Sθ Cθ Sφ Cθ Cφ
140
4 The geometric description of rotation
2) Euler angle expressed in terms of the direction cosine matrix components are φ = atan2( D32 , D33 ),
if D33 = 0, (4.75)
θ = atan2(−D31 , D32 sin φ + D33 cos φ), ψ = atan2( D21 , D11 ). It is clear that when θ = π/2 or 3π/2, a singularity occurs. 3) The tangent operators are ⎡ ⎡ ⎤ 0 −Sψ Cψ Cθ −Sθ 0 H 3-2-1 = ⎣0 Cψ Sψ Cθ ⎦ , H ∗3-2-1 = ⎣ Cθ Sφ Cφ Cθ Cφ −Sφ 1 0 −Sθ
⎤ 1 0⎦ , 0
(4.76)
respectively. 4) The inverses of the tangent operators are ⎤ ⎡ ⎡ ⎤ Cφ C S S S C 0 Sφ 1 ⎣ ψ θ ψ θ θ⎦ 1 ⎣ −1 ∗−1 −Sψ Cθ Cψ Cθ 0 , H 3-2-1 = 0 Cθ Cφ −Cθ Sφ ⎦ . (4.77) H 3-2-1 = Cθ Cθ Cψ Sψ 0 Cθ Sθ Sφ Sθ Cφ 4.11.4 Euler angles: sequence 3-1-2 Euler angles with the 3-1-2 sequence are deſned as follows. 1. A planar rotation of magnitude φ about axis ¯ı3 brings I to A. 2. A planar rotation of magnitude θ about axis a ¯1 brings A to B. 3. A planar rotation of magnitude ψ about axis ¯b2 brings B to E.
The array of Euler angles is now q T = φ, θ, ψ . 1) The direction cosine matrix is ⎡ ⎤ Cφ Cψ − Sφ Sθ Sψ −Sφ Cθ Cφ Sψ + Sφ Sθ Cψ D3-1-2 = ⎣Sφ Cψ + Cφ Sθ Sψ Cφ Cθ Sφ Sψ − Cφ Sθ Cψ ⎦ −Cθ Sψ Sθ Cθ Cψ
(4.78)
2) Euler angle expressed in terms of the direction cosine matrix components are ψ = atan2(−D31 , D33 ),
if D33 = 0;
θ = atan2( D32 , −D31 sin ψ + D33 cos ψ); φ = atan2(−D12 , D22 ). It is clear that when θ = π/2 or 3π/2, a singularity occurs. 3) The tangent operators are ⎡ ⎡ ⎤ ⎤ 0 Cφ −Sφ Cθ −Cθ Sψ Cψ 0 ∗ 0 1⎦ , H 3-1-2 = ⎣0 Sφ Cφ Cθ ⎦ , H 3-1-2 = ⎣ Sθ Cθ Cψ Sψ 0 1 0 Sθ
(4.79)
(4.80)
4.11 Euler angle formulas
141
respectively. 4) The inverses of the tangent operators are ⎤ ⎡ ⎡ ⎤ Cψ Sφ Sθ −Cφ Sθ Cθ −Sψ 0 1 1 ⎣Cφ Cθ Sφ Cθ 0 ⎦ , H ∗−1 = ⎣Cθ Cψ 0 Cθ Sψ ⎦ . (4.81) H −1 = 3-1-2 3-1-2 Cθ Cθ −Sφ Cφ 0 Sθ Sψ Cθ −Sθ Cψ 4.11.5 Problems Problem 4.26. Angular velocity for 3-2-3 Euler angles A popular choice of Euler angles is the 3-2-3 sequence that corresponds to the following sequence of planar rotations. First, a rotation of magnitude ψ about axis ¯ı3 , called precession, brings basis I to A. Second, a rotation of magnitude θ about axis a ¯2 , called nutation, brings basis A to B. Finally, a rotation of magnitude φ about axis ¯b3 , called spin, brings basis B to E. (1) Find the angular velocity vector associated with this rotation. (2) Determine the components of this vector in the ſxed and moving bases. (3) Discuss the occurrence of singularities.
Problem 4.27. Angular velocity for 3-2-1 Euler angles A popular choice of Euler angles for airplane ƀight mechanics is the 3-2-1 sequence that corresponds to the following sequence of planar rotations. First, a rotation of magnitude ψ about axis ¯ı3 , called heading, brings basis I to A. Second, a rotation of magnitude θ about axis a ¯2 , called attitude, brings basis A to B. Finally, a rotation of magnitude φ about axis ¯b1 , called bank, brings basis B to E. (1) Find the angular velocity vector associated with this rotation. (2) Determine the components of this vector in the ſxed and moving bases. (3) Discuss the occurrence of singularities.
Problem 4.28. Angular velocity for 3-1-2 Euler angles A choice of Euler angles is the 3-1-2 sequence that corresponds to the following sequence of planar rotations. First, a rotation of magnitude φ about axis ¯ı3 brings basis I to A. Second, a rotation of magnitude θ about axis a ¯1 brings basis A to B. Finally, a rotation of magnitude ψ about axis ¯b2 brings basis B to E. (1) Find the angular velocity vector associated with this rotation. (2) Determine the components of this vector in the ſxed and moving bases. (3) Discuss the occurrence of singularities.
Problem 4.29. Spinning disk on a rotating arm The system depicted in ſg. 4.9 consists of a shaft of height h rigidly connected to an of radius R mounted at the free end of the arm. arm of length La and of a spinning disk Frame F S = S, S + = (¯ s1 , s¯2 , s¯3 ) is attached to the shaft at point S, whereas frame F D = C, B∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to the disk at point C. Superscripts (.)+ and (.)∗ will be used to denote tensor components in bases S + and B∗ , respectively. Angle α(t) and β(t) are the magnitudes of the planar rotations about axis ¯ı3 and s¯1 , respectively, that bring basis I to S + and basis S + to B∗ , respectively. (1) Find the angular velocity vector of basis B∗ with respect to basis I. (2) Find the components of this vector resolved in basis I, then resolved in B∗ . (3) Find the angular acceleration vector of basis B with respect to basis I. (4) Find the components of this vector resolved in basis I, then in basis B∗ .
Problem 4.30. Alternative expression of the angularvelocity vector
Show that the angular velocity vector can be written as ω = e1 e¯˙ 1 + e2 e¯˙ 2 + e3 e¯˙ 3 /2. Give a geometric interpretation of this result.
142
4 The geometric description of rotation
Problem 4.31. Components of the angular velocity vector in the rotating basis Based on eqs. (4.55) and (4.15), show that the components of the angular velocity vector in ¯ + sin φ n ¯˙ + (1 − cos φ)n ˙ n ¯ . Compare your result the rotating basis can be written as ω ∗ = φ˙ n with eq. (4.58).
Problem 4.32. Derivatives with respect to the rotation parameters This section has focused on the time derivatives of the rotation tensor. In some applications, derivatives of the rotation tensor with respect to the rotation parameters are needed. Let R = R(q), where q T = q1 , q2 , q3 are the rotation parameters that could be, for instance, Euler angles with a speciſc sequence of planar rotations, as discussed in section 4.11. Let ∂R = Ri , ∂qi
i = 1, 2, 3.
(1) Show that Ri RT = hi , i = 1, 2, 3, where hi are the columns of the tangent operator H, ˙ RT . (2) Show that RT R = i.e., H = [h , h , h ], ω = H q˙ and ω = R h∗i , i = 1, 2, 3, 1
2
3
i
where h∗i are the columns of the tangent operator H ∗ , i.e., H ∗ = [h∗1 , h∗2 , h∗3 ], ω ∗ = H ∗ q˙ and ˙ (3) If vector u is not a function of q and u∗ = RT u, show that ω ∗ = RT R. ∂u∗ =u ∗ H ∗ = RT u H. ∂q
(4.82)
(4) If vector u∗ is not a function of q and u = R u∗ , show that ∂u =u T H = R u ∗T H ∗ . ∂q
(4.83)
Problem 4.33. Derivatives of angular velocity with respect to the rotation parameters Prove the following two identities ∂ω ∗ ˙ = ∂ω + ω H H = R , ∂q ∂q
(4.84)
∗ ∂ω ˙ ∗ = ∂ω − ω H ∗ H ∗ = RT . ∂q ∂q
(4.85)
Hint: be familiar with the results of the previous problem. First show that h1 h2 = R2 RT1 − h1 h2 = (R21 RT + R2 RT1 ) − (R12 RT + R1 RT2 ). R1 RT2 , and because R12 = R21 , show that The following relationships result ∂h2 ∂h1 − , h1 h2 = ∂q1 ∂q2
∂h3 ∂h2 h2 h3 = − , ∂q2 ∂q3
∂h1 ∂h3 h3 h1 = − . ∂q3 ∂q1
Combining these equations then yields ∂h1 = H1 − h1 H, ∂q
∂h2 = H2 − h2 H, ∂q
∂h3 = H3 − h3 H, ∂q
where notation H i = ∂H/∂qi was introduced. Application of the chain rule for derivatives then leads to the desired identities.
4.12 Spatial derivatives of rotation operations
143
4.12 Spatial derivatives of rotation operations In the previous sections, time-dependent rotations were treated. Space-dependent rotations will be treated in a similar manner in this section. In fact, space-dependent rotations were encountered in chapter 2 when dealing with path coordinates, surface coordinates, and orthogonal curvilinear coordinates, as discussed in sections 2.3, 2.5, and 2.7, respectively. Consider now a space-dependent orthonormal basis E(s) = (¯ e1 , e¯2 , e¯3 ). If R(s) is the space-dependent rotation tensor that bring I to E(s), e¯1 (s) = R(s)¯ı1 . A spatial derivative of this expression yields e¯1 (s) = R¯ı1 (t) = R RT e¯1 (s) = κ e¯1 (s), where κ = R RT and notation (·) indicates a derivative with respect to the spatial variable s. κ is the curvature vector, and by analogy with eq. (4.58), is expressed as ¯ + sin φ n ¯ + (1 − cos φ) nn ¯. κ = φ n
(4.86)
This result is similar to that obtained for the angular velocity vector, eq. (4.58): ˙ is replaced by the spatial derivative, (·) . The curvature vector the time derivative, (·), resolved in basis E is κ∗ = RT κ, and κ ∗ = RT R . 4.12.1 Path coordinates Section 2.2 studies the differential geometry of curves in three-dimensional space. Unit vector t¯ was shown to deſne the tangent to the curve at a point, vector n ¯ to be normal to the curve at the same point, and the binormal vector ¯b was selected to be orthogonal to the two other vectors, see ſg. 2.2. In section 2.2.1, vectors t¯, n ¯ , and ¯b were shown to form an orthonormal basis, F = (t¯, n ¯ , ¯b), called Frenet’s triad. The following orthogonal tensor is now deſned ¯ , ¯b . F (s) = t¯, n (4.87) This tensor can be interpreted as the space-dependent rotation tensor that bring the reference triad I, to Frenet’s triad F. The curvature tensor, κ ∗ , of the curve is deſned as dF FT (4.88) =κ ∗ . ds With the help of eqs. (2.13), the curvature vector becomes 1 1 , 0, . (4.89) κ∗T = τ ρ Clearly, the twist and curvature of the curve, deſned in eqs. (2.12) and (2.7), respectively, are the two non-vanishing components of the curvature vector resolved in Frenet’s triad. The components of the curvature vector resolved in the reference frame I are then κ = F κ∗ .
144
4 The geometric description of rotation
Finally, let curvilinear variable s be a function of time. Frenet’s triad now becomes an implicit function of time, F (t) = F (s(t)). Using the chain rule for derivatives, the angular velocity of Frenet’s triad, resolved in basis F, is now ω ∗ = F T F˙ = F T
dF s˙ = s ˙ κ∗ . ds
(4.90)
This implies ω∗ = sκ ˙ ∗ : the angular velocity vector is parallel to the curvature vector. 4.12.2 Surface coordinates In the study of the differential geometry of surfaces in three-dimensional space, see section 2.4, unit vectors e¯1 and e¯2 were shown to deſne the plane tangent to the surface at a point and vector n ¯ to be normal to the surface at the same point, see ſg. 2.7. In section 2.4.6, vectors e¯1 , e¯2 , and n ¯ were shown to form an orthonormal basis B = (¯ e1 , e¯2 , n ¯ ), when using lines of curvature. The following orthogonal tensor is now deſned F (η1 , η2 ) = [¯ e1 , e¯2 , n ¯] .
(4.91)
This tensor can be interpreted as the space-dependent rotation tensor that brings the reference triad I to triad B. The curvature tensors of the surface are now deſned as FT
∂F =κ ∗1 , ∂s1
FT
∂F =κ ∗2 . ∂s2
(4.92)
With the help of Gauss’ and Weingarten’s formulæ, eqs. (2.65), the curvature vectors are found as 1 1 1 1 ∗T ∗T , , 0, , κ2 = . (4.93) κ1 = − 0, R1 T1 R2 T2 The principal radii of curvature, see eqs. (2.54), and the twists, eqs. (2.58) and (2.59), of the surface, are the components of the curvature vectors resolved in frame B. The components of the curvature vectors resolved in frame I are then κ1 = F κ∗1 and κ2 = F κ∗2 . If curvilinear coordinates s1 and s2 are functions of time, tensor F becomes an implicit function of time, F (t) = F (s1 (t), s2 (t)). The angular velocity of tensor F , resolved in basis B, is now ∂F ∂F ω ∗ = F T F˙ = F T s˙ 1 + s˙ 2 = s˙ 1 κ ∗1 + s˙ 2 κ ∗2 , (4.94) ∂s1 ∂s2 where the chain rule for derivatives was used. This implies ω ∗ = s˙ 1 κ∗1 + s˙ 2 κ∗2 : both curvature vectors contribute to the total angular velocity of basis B. In terms of the surface coordinates, eqs. (4.92) imply ∂F /∂η1 = F h1 κ ∗1 , and ∗ ∂F /∂η2 = F h2 κ 2 , where h1 and h2 are the scale factors introduced in eq. (2.56).
4.12 Spatial derivatives of rotation operations
145
Taking partial derivatives with respect to η2 and η1 of the ſrst and second equations, respectively, leads to h1 h 2 κ ∗2 κ ∗1 +
∂ ∂ (h1 κ∗1 ) = h1 h2 κ ∗1 κ∗2 + (h2 κ ∗2 ), ∂η2 ∂η1
because ∂ 2 F /∂η1 ∂η2 = ∂ 2 F /∂η2 ∂η1 . With the help of identity (1.33a), the Gauss-Codazzi conditions are then obtained 1 ∂ ∗ ∗ κ∗ = 1 ∂ (h κ (h2 κ∗2 ). 1 κ1 ) − 1 2 h1 ∂s2 h2 ∂s1
(4.95)
More explicitly, this vector condition gives rise to three scalar conditions ∂ h2 h2 ( )= , ∂s1 R2 R1 T2 ∂ h1 h1 ( )= , ∂s2 R1 R2 T1 1 ∂ h1 1 ∂ h2 1 ( )+ ( )+ = 0. h1 ∂s2 T1 h2 ∂s1 T2 R1 R2
(4.96a) (4.96b) (4.96c)
These equations express three conditions that must be satisſed by the radii of curvature, twists, and their spatial derivatives. 4.12.3 Orthogonal curvilinear coordinates In the study of the differential geometry of a mapping of the three-dimensional space onto itself, see section 2.6, vectors e¯1 , e¯2 , and e¯3 were deſned along the base vectors of the mapping. In section 2.6.2, these vectors were shown to form an orthonormal triad, E, in the case of orthogonal curvilinear coordinate systems. The following orthogonal tensor is now deſned F (η1 , η2 , η3 ) = [¯ e1 , e¯2 , e¯3 ] .
(4.97)
This tensor can be interpreted as the rotation tensor that brings the reference triad, I, to orthonormal triad E. The curvature tensors of the orthogonal curvilinear coordinate system are now deſned as ∂F ∂F ∂F FT =κ ∗1 , F T = κ∗2 , F T =κ ∗3 . (4.98) ∂s1 ∂s2 ∂s3 With the help of eqs. (2.84), these curvature vectors are found to be 1 1 1 1 1 1 , , 0, , , 0 , (4.99) , κ∗2 = , κ∗3 = κ∗1 = 0, R12 R13 R21 R23 R31 R32 where the radii of curvatures of the coordinate system were deſned in eqs. (2.85). The various derivatives of the scale factors are the components of the curvature vectors resolved in frame B. The components of the curvature vectors resolved in frame I are then κ1 = F κ∗ , κ2 = F κ∗2 , and κ3 = F κ∗3 .
146
4 The geometric description of rotation
If the curvilinear coordinates s1 , s2 , and s3 are functions of time, tensor F becomes an implicit function of time, F (t) = F (s1 (t), s2 (t), s3 (t)). The angular velocity of tensor F , resolved in basis B, is now ∂F ∂F ∂F ω ∗ = F T F˙ = F T s˙ 1 + s˙ 2 + s˙ 3 = s˙ 1 κ ∗1 + s˙ 2 κ ∗2 + s˙ 3 κ ∗3 , (4.100) ∂s1 ∂s2 ∂s3 where the chain rule for derivatives was used. This implies ω∗ = s˙ 1 κ∗1 + s˙ 2 κ∗2 + s˙ 3 κ∗3 : the three curvature vectors contribute to the total angular velocity of basis B. The various components of curvature are not independent of each other; following the process outlined in the previous section, relationships similar to the GaussCodazzi conditions can be readily derived. Example 4.8. Motion of a particle on a curve Figure 4.15 depicts a particle sliding along curve C embedded in a rigid body. The curvilinear variable along the curve is denoted s. The rigid body is moving with respect to an inertial frame of reference, F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. The conſguration of the rigid body is deſned by the body attached frame, F B = B, B ∗ = (¯b1 , ¯b2 , ¯b3 ) . Superscript (·)∗ indicates the components of tensors resolved in basis B ∗ . The components of the position vector of point B with respect to point O, resolved in basis I, are denoted r B , and R(t) are the components of the rotation tensor that brings basis I to B ∗ , resolved in basis I.
b3
b1
B B
i3
P + F
p n
rB(t), R(t) O
b
s
*
b2 rP
I
C
t
i2
i1 Fig. 4.15. Rigid body with an embedded curve.
Let point P be a point along curve C; the curvilinear variable at the location of point P is denoted s. The position vector of point P with respect to point B is denoted p, and the components of this vector resolved in basis B ∗ are denoted p∗ . Because curve C is embedded in the rigid body, its shape is deſned by the position vector of a point on the curve, p∗ = p∗ (s); clearly, the components of this position vector are most naturally resolved in the body attached basis, B ∗ . Find the position, velocity, and acceleration vector of point P. The inertial position vector of point P is r P = rB + p = r B + R p∗ , where r P are the components of the position vector of point P with respect to point O, resolved in basis I.
4.12 Spatial derivatives of rotation operations
147
The component of the inertial velocity vector of point P resolved in basis I are readily obtained by taking a time derivative of the position vector to ſnd ˙ p∗ + R p˙ ∗ = v + ω vP = vB + R R p∗ + sR ˙ t¯∗ , B 0 ˙ RT ) are the comwhere v B = r˙ B is the inertial velocity of point B, ω = axial(R ponents of the angular velocity vector of the rigid body resolved in basis I, and t¯∗ the component of the unit tangent vector to the curve resolved in basis B ∗ . The ſrst term of this expression stems from the translation of the rigid body, and the second from its rotation. The last term describes the velocity associated with the sliding of the particle along the curve. The components of the inertial velocity vector resolved in the body attached basis, B ∗ , now become RT v P = RT v B + ω ∗ p∗ + s˙ t¯∗ . Note that the expression for the components of the inertial velocity of point P is simpler when resolved in the body attached basis, B ∗ , than when resolved in the inertial basis, I. This is expected, because the quantities associated with curve C, p∗ and t¯∗ , are most naturally expressed in basis B ∗ . Next, the components of the inertial acceleration of point P resolved in basis I are obtained by taking a derivative of the velocity components in the same basis to ſnd ˙ p∗ + ω ˙ t¯∗ + sR aP = aB + ω ˙ R p∗ + ω R R p˙ ∗ + s¨R t¯∗ + s˙ R ˙ t¯˙∗ s˙ 2 Rn = aB + (ω ˙ + ω ω )R p∗ + 2s˙ ω R t¯∗ + s¨R t¯∗ + ¯∗, ρ ¯ ∗ are the component of where aB = v˙ B is the inertial acceleration of point B and n ∗ the unit normal vector to the curve resolved in basis B . Here again, the components of the inertial acceleration vector are simpler when expressed in the body attached basis, s˙ 2 ∗ T RT aP = RT aB + (R n ¯ . ω˙ + ω ∗ω ∗ )p∗ + 2s˙ ω ∗ t¯∗ + s¨t¯∗ + ρ The ſrst two terms represent the contributions of the translation and rotation of the rigid body, respectively. The third term is the Coriolis acceleration. Finally, the last two terms are the acceleration of the particle with respect to the rigid body, which in this case, are the acceleration of the particle obtained using path coordinates, see eq. (2.34). The components of the angular acceleration vector expressed in basis B ∗ , RT ω, ˙ T T T ˙ ∗ ∗ ∗ · ∗ ∗ ∗ are easily evaluated. Indeed, R ω˙ = R (R ω ) = R R ω + ω˙ = ω ω + ω˙ = ω˙ ∗ . A simpliſed expression for the components of the inertial acceleration vector expressed in the body attached basis is then ∗
RT aP = RT aB + (ω ˙ + ω ∗ω ∗ )p∗ + 2s˙ ω ∗ t¯∗ + s¨t¯∗ +
s˙ 2 ∗ n ¯ . ρ
148
4 The geometric description of rotation
It is possible to deſne a frame associated with the particle, F F = ¯ , ¯b) , where F + is the curve’s Frenet’s triad at point P. Superscript P, F + = (t¯, n + (·) indicates tensor components resolved in this basis. The components of the rotation tensor that brings basis B ∗ to basis F + , resolved in basis B ∗ , are denoted F ∗ . This tensor, like all other characteristics of the curve, is most naturally expressed in basis B ∗ , a basis attached to the body in which the curve is embedded. The components of the unit vector tangent to curve C, resolved in basis B ∗ , are t¯∗ = F ∗¯b∗1 = F ∗¯ı1 , and hence, its components resolved in basis I become t¯ = R F ∗¯ı1 . The angular velocity of basis F + with respect to basis I is now evaluated by taking a time derivative of this tangent vector to ſnd
˙ F ∗ + R F˙ ∗ )(R F ∗ )T t¯ t¯˙ = (R = ω + s(R ˙ F ∗ )F ∗T F ∗ (R F ∗ )T t¯ = ( F ∗ κ+ )t¯, ω + s˙ R where κ+ = F ∗T F ∗ are the components of the curvature vector of curve C resolved in basis F + , see eq. (4.88); it follows that κ = R F ∗ κ+ are its components resolved in basis I. The angular velocity of basis F + with respect to basis I, denoted Ω, is now Ω = ω + sR ˙ F ∗ κ+ = ω + sκ. ˙ The ſrst term represents the contribution of the angular velocity of the rigid body; the second term stems from the change in orientation of Frenet’s triad as the particle moves along the curve. Note that the above result could have been established more expeditiously with the help of the addition theorem. Finally, the angular acceleration of basis F + is the time derivative of the angular velocity ˙ = ω˙ + s¨κ + s( ˙ F ∗ κ+ + sR Ω ˙ R ˙ F ∗ κ+ + sR ˙ F ∗ κ+ ) = ω˙ + s¨κ + s( ˙ ω κ + sR ˙ F ∗κ + κ+ + sR ˙ F ∗ κ+ ). The second term inside the parentheses vanishes because κ + κ+ = 0. The ſnal expression for the angular acceleration is Ω˙ = ω˙ + s¨κ + s˙ ω κ + s˙ 2 R F ∗ κ+ . The inertial acceleration of Frenet’s triad depends on the curvature vector κ = R F ∗ κ+ , but also on its derivative along the curve, κ+ . Both quantities, κ+ and κ+ , are intrinsic properties of curve C because they are components of the curvature vector and its spatial derivative resolved in Frenet’s triad, F + . 4.12.4 The differential rotation vector Let time-dependent rotation tensor R(t) describe the rotation from basis I = (¯ı1 , ¯ı2 , ¯ı3 ), called the ſxed basis, to basis B = (¯b1 , ¯b2 , ¯b3 ), called the rotating basis. The differential rotation vector is deſned by analogy to the angular velocity vector, see eq. (4.56), as
4.13 Applications to particle dynamics
dψ = axial(dR RT ),
149
(4.101)
where dψ is called the differential rotation vector. Note that there exist no “rotation vector,” ψ, such that d(ψ) gives the differential rotation vector. To emphasize this important fact, notation dψ is used to indicate the differential rotation vector, rather than dψ. Taking a differential of eq. (4.56) and a time derivative of eq. (4.101) then yields ˙ T ˙ RT + RdR ˙ ˙ RT + dR R ˙ T , respectively. Subtracting these d ω = dR and dψ = dR two equations, and using the orthogonality of the rotation tensor, eq. (4.26), then leads to ˙ ˙ ˙ dRT − dR R ˙ RT )(R dRT ) − (dR RT )(R R ˙ T = dψ ˙ T ). d ω = dψ +R + (R With the help of the deſnition of the angular velocity vector, eq. (4.56), and of the differential rotation vector, eq. (4.101), this reduces to ˙ ˙ ω − ω = dψ ω) d ω = dψ + dψ dψ + (dψ where identity (1.33a) was used. Finally, a differential in the angular velocity vector ˙ −ω becomes dω = dψ dψ. This important result relates differentials in the angular velocity vector to the differential rotation vector and its derivatives. Differentials of the components of the angular velocity vector expressed in the rotating frame can also be obtained in a similar manner ˙ ∗, dω = R dψ
˙ −ω dω = dψ dψ, ∗
∗
∗
∗
˙ +ω dψ , dω = dψ
∗
˙ dω = R dψ. T
(4.102a) (4.102b)
4.13 Applications to particle dynamics The geometric description of rotation presented in the previous sections is used extensively when analyzing the dynamic behavior of systems of particles when rotations are required to describe the kinematics of the system. Furthermore, Newton’s laws will be expressed in various bases to ease the analysis and help understand the physical interpretation of the various quantities involved in the problem. Example 4.9. Pendulum with rotating mass Figure 4.16 depicts a pendulum of length and tip mass M featuring an additional rotating mass m located at a ſxed distance d from the tip mass. Frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )] is inertial and the pendulum is attached to the ground at point O where a bearing allows rotation about axis ¯ı3 ; gravity acts along axis ¯ı1 . A second frame, F E = [O, E + = (¯ e1 , e¯2 , e¯3 )], is deſned; tensor components resolved in basis E + are denoted with a superscript (·)+ . A planar rotation of magnitude φ about axis ¯ı3 brings basis I to basis E + . Axis e¯1 is aligned with the massless rigid arm OA of the pendulum.
150
4 The geometric description of rotation
A third frame, F B = A, B ∗ = (¯b1 , ¯b2 , ¯b3 ) , is also deſned; tensor components resolved in basis B ∗ are denoted with a superscript (·)∗ . At point A, a bearing allows rotation of the massless rigid bar AT about axis e¯1 . A planar rotation of magnitude θ about axis e¯1 brings basis E + to basis B ∗ . Axis ¯b2 passes through the rotating mass m. Derive the equation of motions of the system using Newton’s second law. e2 i3 = e3 O
l
I f
i1
d T g m M + E A e1 = b1
e3
b2
i2
b3 q
e2
m
d
T
A
B M e1 = b1 *
Fig. 4.16. Conſguration of a pendulum with a rotating mass.
Let Rφ and R+ be the components of the rotation tensors that bring basis I to θ + + E and basis E to B ∗ , respectively, resolved in basis I and E + , respectively. The components of the tensor that brings basis I to B ∗ , resolved in basis I, are then R = Rφ R+ , and hence θ ⎤⎡ ⎡ ⎤ ⎡ ⎤ Cφ −Sφ 0 1 0 0 Cφ −Sφ Cθ Sφ Sθ R = ⎣ Sφ Cφ 0⎦ ⎣0 Cθ −Sθ ⎦ = ⎣ Sφ Cφ Cθ −Cφ Sθ ⎦ , 0 0 1 0 Sθ Cθ 0 Sθ Cθ where the short-hand notation, Sφ = sin φ, Cφ = cos φ was used, with similar conventions for angle θ. The angular velocity vector of basis B ∗ with respect to basis I is found with the ˙ θ ¯b2 + φC ˙ θ ¯b3 . help of the addition theorem to be ω = φ˙ e¯3 + θ˙ ¯b1 = θ˙ ¯b1 + φS The components of the angular and acceleration vectors, resolved in basis B ∗ , now become ⎧ ⎧ ⎫ ⎫ θ¨ ⎨ θ˙ ⎬ ⎨ ⎬ ˙ θ , ω˙ ∗ = φS ¨ θ + φ˙ θC ˙ θ . ω∗ = φS ⎩˙ ⎭ ⎩¨ ˙ θ⎭ φCθ φCθ − φ˙ θS The position vector of particle m with respect to inertial point O is xm = ¯b1 + ¯ d b2 . The inertial velocity vector then becomes x˙ m = ω ¯b1 + d ω ¯b2 and ſnally, the ˙ ˙ ¯ ¯ +ω ω ) b1 + d(ω +ω ω ) b2 . The components of this acceleration vector is x ¨ m = (ω vector, resolved in basis B, then become ⎧ ⎫ ¨ θ + 2dφ˙ θS ˙ θ⎬ −φ˙ 2 − dφC ⎨ ∗ ∗ ¨ − dφ˙ 2 C 2 − dθ˙2 RT x ¨ m = (ω ˙ + ω ∗ω ∗ )¯b∗1 + d(ω ˙ + ω ∗ω ∗ )¯b∗2 = , φC θ ⎩ ¨ θ ⎭ −φSθ + dθ¨ + dφ˙ 2 Sθ Cθ
4.13 Applications to particle dynamics
151
¯∗T ¯ ¯ where ¯b∗T 1 = 1, 0, 0 and b2 = 0, 1, 0 are the components of vectors b1 and b2 , ∗ respectively, resolved in basis B . The position vector of particle M with respect to inertial point O is xM = ¯b1 . The velocity and acceleration vectors of mass M can be found by letting d = 0 in the corresponding expressions for the velocity and acceleration vectors of mass m. The left portion of ſg. 4.17 shows a free body diagram of the two mass particles; F M and F m are the reaction forces exerted by the rigid bars onto particles M and m, respectively. For particle M , the applied forces are F M and the gravity force, M g¯ı1 ; Newton’s second law, resolved in basis B ∗ , then yields ⎧ ⎫ ⎧ ∗ ⎫ + M gCφ ⎬ ⎨ −φ˙ 2 ⎬ ⎨ FM1 ¨ M = F ∗ − M gSφ Cθ , (4.103) φC ⎩ ¨ θ ⎭ ⎩ M2 ⎭ ∗ FM3 + M gSφ Sθ −φSθ
∗ ∗ ∗ ∗ where F ∗T M = FM1 , FM2 , FM3 are the components of vector F M in basis B . T The components of the gravity force vector, resolved in basis B ∗ , are M gR ¯ı1 .
i3
O
i2 l
i1
A Mg
T mg
O
i2 l
Fm
d FM
i3
-Fm
d
-FM i1
A
T e1 = b1
Fig. 4.17. Left portion: free body diagram of the two masses. Right portion: free body diagram of rigid bars OA and AT.
For particle m, the applied forces are F m and the gravity force mg¯ı1 ; Newton’s second law, resolved in basis B ∗ , then yields ⎧ ⎫ ⎧ ⎫ ¨ θ + 2dφ˙ θS ˙ θ ⎬ ⎨ F ∗ + mgCφ ⎬ ⎨ −φ˙ 2 − dφC m1 ¨ − d(φ˙ 2 C 2 + θ˙2 ) m = F ∗ − mgSφ Cθ , (4.104) φC θ ⎩ ¨ θ ⎭ ⎩ m2 ⎭ ∗ 2 ¨ ˙ F + mgS S φ θ −φSθ + d(θ + φ Sθ Cθ ) m3
∗ ∗ ∗ ∗ where F ∗T m = Fm1 , Fm2 , Fm3 are the components of vector F m in basis B . Equations (4.103) and (4.104) are the equations of motion of the system. They involve two kinematic unknowns, φ and θ, and six force unknowns, the components of the reaction forces F M and F m , for a total of eight unknowns. Since the system comprises two particles, Newton’s equations yield a total of six equations. Consequently, two additional relationships are required to solve the problem. The right portion of ſg. 4.17 illustrates the two massless bars OA and TA. In view of the presence of a bearing at point A, the moment of the forces applied to bar TA must vanish about axis ¯b1 , i.e., −¯bT1 db2 F m = 0; this condition reduces to
152
4 The geometric description of rotation
∗ −d¯bT3 F m = 0 and ſnally, Fm3 = 0. The third line of eq. (4.104) the yields the following equation ¨ θ + d(θ¨ + φ˙ 2 Sθ Cθ ) = mgSφ Sθ . m −φS (4.105)
Similarly, the moment of the forces applied to bars OA and TA must vanish about axis ¯ı3 , because a bearing is present at point O. This condition implies −¯ıT3 [b1 F M + (b1 +db2 )F m ] = 0, or, expressed in basis B ∗ , −¯ıT3 R[b∗1 F ∗M +(b∗1 +db∗2 )F ∗m ] = 0. Expanding this relationship leads to ⎧ ⎫ 0 ⎬
⎨ ∗ 0, Sθ , Cθ FM3 = 0. ⎩ ∗ ∗ ∗ ⎭ dFm1 − (FM2 + Fm2 ) Eliminating the reaction force components with the help of eqs. (4.103) and (4.104) leads to the following equation 2 M + m(2 + d2 )Cθ2 φ¨ − mdCθ (φ˙ 2 Cθ2 + θ˙2 ) (4.106) ˙ θ Cθ = −M gSφ − mgCθ (Sφ Cθ + dCφ ). +mdφ˙ 2 Cθ − 2md2 φ˙ θS Equations (4.105) and (4.106) are two nonlinear, coupled, ordinary differential equations for the two kinematic variables, φ and θ. Once these equations have been solved, eqs. (4.103) and (4.104) will yield the reaction forces, thereby completing the solution of the problem. 4.13.1 Problems Problem 4.34. Relationships between angular velocity and curvature Consider a rotation ſeld that is a function of both space and time, i.e., R = R(s, t). It is now ˙ RT ) possible to deſne the components of the angular velocity vector as ω(s, t) = axial(R ∗ T ˙ and ω (s, t) = axial(R R) resolved in the inertial and rotating frames, respectively. Similarly, the components of the curvature vector are κ(s, t) = axial(R RT ) and κ∗ (s, t) = axial(RT R ) in the inertial and rotating frames, respectively. Based on the developments preκω, ω ∗ = κ˙ ∗ + ω ∗ κ∗ , sented in section (4.12.4), prove the following results ω = κ˙ + ∗ ∗ T ˙ ω = R κ˙ , and ω = R κ.
Problem 4.35. Rigid body with a slot Figure 4.18 depicts a rigid body with a slot in its reference conſguration as deſned by frame F0 = B, B0 = (¯b01 , ¯b02 , ¯b03 ) , where basis B0 determines the orientation of the body. Position vector xO determines the location of a reference point O on the rigid body with respect to inertial frame I. In the ſnal conſguration, the rigid body is deſned by frame F = B, B = (¯b1 , ¯b2 , ¯b3 ) , where its orientation is determined by basis B. The displacement of point O is denoted uO . Point P moves along a slot ſxed with respect to the rigid body in such a way that the distance from point B to point P is a given function of time d(t). The unit ¯ vectors aligned with the slot in the reference and ſnal conſgurations are denoted s¯ and S, respectively. Let R0 and R be the rotation tensors that bring basis I to B0 and basis B0 to B,
4.13 Applications to particle dynamics
153
respectively. (1) Find the inertial velocity and acceleration of point P in terms of the velocity and acceleration of point B, the angular velocity and acceleration of the rigid body, and function d(t). Express this vector in inertial basis I. All tensor components should be resolved in basis I. (2) Express these inertial velocity and acceleration vectors in the body attached basis B. All tensor components should be resolved in basis B.
S
Initial configuration b03
b3
b2
P
u 0, R
B
b1
i3
b02 B0
Final Configuration I i2 O
s b01
xO, R0
l f
i3
P
i2
O
B B
I
i1
e2 s M
k m E A
g
e1
i1
Fig. 4.18. Rigid body with a slot in the reference and ſnal conſgurations.
Fig. 4.19. Pendulum with a sliding mass connected to a spring.
Problem 4.36. Pendulum with a sliding mass Figure 4.19 depicts a pendulum of mass M and length connected at point A to a massless tube in which a point mass m is sliding while restrained by a spring of stiffness constant k. Frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )] is inertial and the pendulum is attached to the ground at point O where a bearing allows rotation about axis ¯ı3 ; gravity acts along axis ¯ı1 . A second e1 , e¯2 , e¯3 )] is deſned. A planar rotation of magnitude φ about axis ¯ı3 frame F E = [A, E = (¯ brings basis I to basis E; axis e¯2 is aligned with the massless tube. The position of mass m with respect to point A is denoted s. (1) Using Newton’s second law, derive the equations of motion of the system for φ(τ ) and s(τ ). (2) Plot the time history of φ(τ ). (3) Plot the time history of s¯(τ ). (4) On one graph, plot the kinetic, potential and total mechanical energies of the system. (5) Plot the normalized components of the reaction force vector acting on particle M . (6) Plot the normalized components of the reaction force vector acting on particle m. (7) Compute the angular momentum vector of the system evaluated with respect to point O. From this expression, derive a differential equation that must be satisſed by φ and s. Show that this relationship can be derived from the equations of motion obtained in step 1. Use the following data: μ = M/m = 1, g¯ = g/(ω 2 ) = 0.6, s¯ = s/. The following non-dimensional time is deſned: τ = ωt, where ω 2 = k/m; derivatives with respect to τ are denoted (·) . Forces are normalized by mω 2 . At time t = 0, φ = π/2, s¯ = 0, φ = 0 and s¯ = 2. For all plot, τ ∈ [0, 200].
Problem 4.37. Mass particle moving in a tube Figure 4.20 shows a particle of mass m moving in a rigid slot under the effect of an actuator. The actuator is connected to the particle at point P and to the slot at point A; for clarity, the actuator is not shown on the ſgure. A rigid bar OA of length r rotates in plane P = (¯ı1 , ¯ı2 ) at a constant angular velocity, Ω. A planar rotation of magnitude ψ = Ωt about axis ¯ı3 brings e1 , e¯2 , e¯3 ); axis e¯1 is along rigid bar OA. The rigid slot basis I = (¯ı1 , ¯ı2 , ¯ı3 ) to axis E = (¯
154
4 The geometric description of rotation
e2 i2
i3 O
A
e3 y
b3
b2
P r
e3
e1
m
Rigid slot
q
e2
i1
P m
s A
e1 = b1
Fig. 4.20. Mass particle moving in a tube. is connected to bar OA at point A and is allowed to rotate with respect the bar about axis e1 , e¯2 , e¯3 ) to axis e¯1 . A planar rotation of magnitude θ about axis e¯1 brings basis E = (¯ B = (¯b1 , ¯b2 , ¯b3 ); axis ¯b2 is along the rigid slot. The position of the mass in the slot is deſned by the curvilinear variable s that is positive along axis ¯b2 . (1) Find the position, velocity and acceleration vectors of point P with respect to inertial point O. (2) Find the components of the acceleration vector resolved in basis B. (3) Write Newton’s second law for the particle, resolved in basis B. (4) Identify the nature of the forces applied on the particle. (5) On one graph, plot the components of the force vector acting on the particle, resolved in basis B. (6) Find the moment of the forces that the particle and actuator apply on the slot with respect to point O. (7) On one graph, plot the components of this moment vector resolved in basis E + . Use the following data: θ(t) = θ0 + θs sin Ωt + θc cos Ωt, where θ0 = 15, θs = −6 and θc = 8 degrees; s(t) = ss sin Ωt + sc cos Ωt, where ss = 0.05 and sc = −0.03 m. m = 10 kg, Ω = 27.02 rad/s, r = 0.8 m.
Problem 4.38. Pendulum with a rotating mass Figure 4.16 depicts a pendulum of length and tip mass M featuring an additional rotating mass m located at a ſxed distance d from the tip mass, as treated in example 4.9 on page 149. Frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )] is inertial and the pendulum is attached to the ground at point O where a bearing allows rotation about axis ¯ı3 ; gravity acts along axis ¯ı1 . A second e1 , e¯2 , e¯3 ) , is deſned. A planar rotation of magnitude φ about frame, F E = O, E + = (¯ axis ¯ı3 brings basis I to basis E +. Axis e¯1 is aligned with the massless rigid arm OA of the pendulum. A third frame, F B = A, B∗ = (¯b1 , ¯b2 , ¯b3 ) , is also deſned. At point A, a bearing allows rotation of the massless rigid bar AT about axis e¯1 . A planar rotation of magnitude θ about axis e¯1 brings basis E + to basis B∗ . Axis ¯b2 passes through the rotating mass m. Derive the equation of motions of the system using Newton’s second law. (1) Using Newton’s second law, derive the equations of motion of the system for φ(τ ) and θ(τ ). (2) On one graph, plot the time history of φ(τ ) and θ(τ ). (3) On one graph, plot the time history of φ and θ . (4) On one graph, plot the kinetic, potential and total mechanical energies of the system. (5) Plot the normalized components of the reaction force vector acting on particle M , resolved in basis B. (6) Plot the normalized components of the reaction force vector acting on particle m, in basis B. (7) Plot the normalized components of the reaction force vector at point O, in basis I. (8) Plot the normalized components of the reaction moment vector at point O, in basis I. (9) Compute the angular momentum vector of the system evaluated with respect to point O. From this expression, derive a differential equation that must be satisſed by φ and θ. Show that this relationship can derived from the equations of motion obtained in step 1. Use the following data: μ = m/M = 1, d¯ = d/ = 0.2. The following non-dimensional time is deſned: τ = ωt, where ω 2 = g/; a derivative with respect to τ is denoted (·) . Forces are
4.14 Change of reference frame operations
155
normalized by M ω 2 , moments by M 2 ω 2 . At time t = 0, φ = π/2, θ = 0, φ = 0 and θ = 0.1. For all plot, τ ∈ [0, 50].
4.14 Change of reference frame operations the conſguration of a rigid body characterized by frame F0A = FigureA4.21 depicts A A A A, E0 = (¯ e01 , e¯02 , e¯03 ) . In the reference conſguration, the position vector of point A P with respect to inertial point O is uA 0 and rotation tensor R0 bring basis I to basis E0A . B In its ſnal conſguration, the rigid A e3 B/A B/A e3 body is characterized by reference x , R B frame F A = A, E A = (¯ eA ¯A ¯A 1 ,e 2 ,e 3) . E A A A e B 2 The displacement vector of point A E B e2 Final from the reference to the ſnal conſgA configuration B uration of the rigid body is uA and roe1 e1 A B B A A tation tensor R bring basis E0A to bau ,R u ,R A B e A 03 e03 sis E . The position vector of point A Reference in the reference conſguration with reconfiguration B A A B spect to point O is uA and roA E0 0 + u E 0 e02 A tation tensor RA RA brings basis I to i B 3 B 0 e02 e01 B B basis E A . u , R0 0 A I e01 u0A, RA0 Figure 4.21 also shows a second O rigid body in its reference and ſnal i2 i1 conſgurations. All quantities belonging this second rigid body are denoted Fig. 4.21. Change of reference frame with superscript (·)B . All vectors and tensor are expressed by their components in the inertial frame I; i.e., all quantities are “viewed by an inertial observer.” The position vector of point B with respect to point A, denoted r B/A , is " ! A " ! B − u0 + uA . r B/A = uB 0 +u The components of this vector resolved in basis E A , denoted r ∗B/A , are +T ! * " ! A " B uB − u0 + uA . r ∗B/A = RA RA 0 +u 0 These components are often called the “components of the position vector of point B as viewed by an observer on frame F A .” Similarly, the rotation tensor that bring basis E A to basis E B , denoted RB/A , can be evaluated as follows +* +T * B B A A B/A A e¯B R = R R R e¯A e¯α . α α = R 0 0 The components of this tensor resolved in E A , denoted R∗B/A , are
156
4 The geometric description of rotation
+T * + * B B R . R∗B/A = RA RA R 0 0 These are often called the “components of the rotation tensor of basis E B as viewed by an observer on frame F A .” The position vector of point B with respect to point A in the reference conſguB/A A A ration is r 0 = uB 0 − u0 . The components of this vector resolved in basis E0 are ∗B/A AT B A r0 = R0 (u0 − u0 ). If body B is rigidly connected to body A, the components of the position vec∗B/A tor of point B as viewed by an observer on frame F A are still x0 in the ſnal conſguration. The components of displacement vector of point B with respect to point A as viewed by an observer on frame F A in the ſnal conſguration are +T ! * " ! A " ! B " B u∗B/A = RA RA uB − u0 + uA − RAT u0 − uA (4.107) 0 +u 0 . 0 0 The rotation tensor that brings basis E0A to basis E0B is RB/A = RB RAT . The 0 0 0
= RAT RB . components of this tensor resolved in E0A are R∗B/A 0 0 0 If body B is rigidly connected to body A, the components of the rotation tensor that bring basis E A to basis E B , resolved in basis E A , are still R∗B/A . Let QB/A be 0
the rotation tensor that measures the change in orientation of basis E B with respect to basis E A , between the reference and ſnal conſgurations. The components of this change in orientation of basis E B as viewed by an observer on frame F A in the ſnal conſguration are ! AT B " A Q∗B/A = R∗B/A R∗B/AT = RAT (4.108) R R R0 . 0 0 Let the ſnal conſguration of the system be time-dependent. The inertial velocities of points A and B, denoted v A and v B , respectively, are easily found as v A = u˙ A and v B = u˙ B , respectively. Similarly, the angular velocity vectors of bases E A and ˙ A RAT ) and E B , denoted ω A and ω B , respectively, are easily found as ω A = axial(R ˙ B RBT ), respectively. All these vectors are expressed by their compoω B = axial(R nents in the inertial frame I; i.e., all quantities are “viewed by an inertial observer.” The components of the velocity vector of point B as viewed by an observer on frame F A , denoted v ∗B/A , are readily found by taking a time derivative of eq. (4.107) to ſnd +T
* ! " ! A " ! " B v ∗B/A = RA RA ω AT uB − u0 + uA + v B − v A . (4.109) 0 +u 0 Similarly, the components of the angular velocity vector of basis E B as viewed ˙ ∗B/A Q∗B/AT ), and it the follows by an observer on frame F A are ω∗B/A = axial(Q from eq. (4.108) that +T ! * " ω ∗B/A = RA RA ωB − ωA . 0
(4.110)
4.15 Orientation of a unit vector
157
4.15 Orientation of a unit vector Consider a unit vector, ¯ı3 , called a director, that rotates to a ſnal orientation e¯3 , as depicted in ſg. 4.22. For convenience, this director is considered to be the third unit vector of a basis I = (¯ı1 , ¯ı2 , ¯ı3 ), rotating to a basis E = (¯ e1 , e¯2 , e¯3 ). The relationship between these two bases is (4.111)
e¯α = R ¯ıα ,
where R is an orthogonal rotation tensor. If attention solely focuses on the director, this rotation tensor is not uniquely deſned, because any rotation about the director leaves its orientation unchanged. A differential change in the director’s orientation is e3 d¯ e3 = eT3 dψ, where dψ is the differential rotation veci3 e1 tor deſned by eq. (4.101). The components of the differE ential change in director orientation resolved in basis E e2 I become ⎧ ⎫ i2 i1 ⎨ dψ2∗ ⎬ RT d¯ e3 = RT eT3 dψ = ıT3 RT dψ = −dψ1∗ , Fig. 4.22. Change of orien⎩ ⎭ 0 tation of the director ¯ı3 . where dψ ∗ are the components of the differential rotation vector resolved in basis E. This relationship demonstrates that differential changes in the orientation vector only depend on two components, dψ1∗ and dψ2∗ , of the differential rotation vector. Arbitrary values of dψ3∗ , corresponding to differential rotations of the director about its own orientation, will not affect differential changes in the director orientation, and hence, setting dψ3∗ = 0 is a valid choice. The following notation is adopted dψ ∗ = ¯ı1 dα∗1 + ¯ı2 dα∗2 = b dα∗ , where ⎡ 1 b = [¯ı1 , ¯ı2 ] = ⎣0 0
⎤ 0 1⎦ . 0
(4.112)
The “two parameter” differential rotation vector is denoted dα∗ . Array b simply expands this two parameter differential rotation vector, dα∗ , to the differential rotation vector, dψ ∗ , by imposing the condition dψ3∗ = 0. It follows that dψ = R dψ ∗ = R b dα∗ , and ſnally, differential changes in the orientation of the triad become d¯ eα = R ıTα b dα∗ .
(4.113)
Part II
Rigid body dynamics
5 Kinematics of rigid bodies
Newton’s laws deal with the dynamic behavior of a single particle and Euler’s laws generalize the analysis to the case of a system of particles. Rigid bodies form a special case of “systems of particles,” and their dynamic behavior is studied in depth in chapter 6. This chapter focuses on the kinematics of rigid bodies, i.e., the description of the motion of rigid bodies without consideration of the forces that create this motion. Sections 5.1 and 5.2 study the displacement and velocity ſelds, respectively, of rigid bodies undergoing arbitrary, time-dependent motion. The concept of relative velocity and acceleration is treated in section 5.3, while section 5.4 addresses the problem of contact between two rigid bodies. The chapter concludes with the analysis of the motion tensor.
5.1 General motion of a rigid body Figure 5.1 depicts a rigid body deſned in its reference conſguration by frame F0 = [A, E0 = (¯ e01 , e¯02 , e¯03 )]. The position vector of point A with respect to point O is denoted r 0 . Let r P be the position vector of a material point P of the rigid body with respect to inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. The position vector of the same material point with respect to point A is denoted sP . Hence, r P = r 0 + sP . The rigid body now undergoes an arbitrary motion that brings it to a ſnal conſguration deſned by frame F = [A, E = (¯ e1 , e¯2 , e¯3 )]. Let R0 and R be the rotation tensors that bring basis I to E0 and basis E0 to E, respectively. Considering ſg. 5.1, the following vector relationship is easily established, uP = u + S P − sP ,
(5.1)
where S P is the position vector of material point P with respect to point A in the T ſnal conſguration. Let s∗P = RT0 sP and S + P = (R R0 ) S P denote the components of vector sP in basis E0 and of vector S P in basis E, respectively.
O. A. Bauchau, Flexible Multibody Dynamics, DOI 10.1007/978-94-007-0335-3_5 © Springer Science+Business Media B.V. 2011
162
5 Kinematics of rigid bodies
Because the body is assumed to be rigid, the components of vector sP in E0 are identical to those of S P in E, i.e., s∗P = S + P , and hence, S P = R sP . Equation (5.1) now becomes ! " uP = u + R − I sP . (5.2) This relationship describes the displacement of a material point P of the rigid body in terms of u, the displacement of its reference point, and tensor R that deſnes its orientation. Note that the choice of reference point A is arbitrary, and hence, eq. (5.2) is not an intrinsic relationship. Reference configuration
Q
e3
e2
n SQ
u, R
E
e03 uP E0 A
d
P
rP
sP P
I O
Q e01
e1
i3 e02
sQ
SP
A
r0, R0
Final Configuration i2
i1
Fig. 5.1. General motion of a rigid body.
To obtain a more general expression of the displacement ſeld, the following question can be asked: is it possible to ſnd a material point of the rigid body, say point Q, whose displacement is parallel to n ¯ , the axis deſning rotation tensor R? If point Q exist, its relative position vector, sQ , must satisfy the following relationship ! " uQ = u + R − I sQ = d¯ n. (5.3) Constant d can be evaluated by taking the scalar product this equation by n ¯ T to ſnd T d=n ¯ u. It then follows that " " ! T ! n−u= n ¯n ¯ − I u. (5.4) R − I sQ = d¯ In view of eq. (4.21) and identity (1.33b), this equation can be written as n 2 sin φ/2 G sQ − n ¯ , which u = 0. The bracketed must be parallel to unit vector n implies 2 sin φ/2 G sQ − n u = β n ¯ , where β is an arbitrary constant. The location of point Q is now readily found as sQ =
n GT β u+ n ¯. 2 sin φ/2 2 sin φ/2
This represents the equation of a line passing through point Q and parallel to n ¯ . The displacements of all points on this line are along n ¯.
5.2 Velocity ſeld of a rigid body
163
Point Q can be deſned uniquely by requiring sQ to be orthogonal to n ¯ , i.e., n ¯ T sQ = 0, and hence, β = 0. The location of point Q [19] now becomes sQ =
n GT u. 2 sin φ/2
(5.5)
By construction, the displacement of point Q is parallel to n ¯ , see eq. (5.3). Combining eqs. (5.2) and (5.3) now yields uP = d¯ n + (R − I)(sP − sQ ).
(5.6)
This relationship expresses the displacement of a material point P of the rigid body as a translation, d¯ n, parallel to axis n ¯ , followed by a rotation about that same axis. The displacement d=n ¯ T u, (5.7) is the intrinsic displacement of the rigid body: all points of the rigid body undergo the same displacement, d, followed by a rotation. If the rigid body undergoes a general planar motion, u lies in the plane of the motion, and n ¯ is perpendicular this plane. Hence, d = n ¯ T u = 0, the intrinsic displacement, d, of a rigid body in general planar motion always vanishes. If the rigid body undergoes a pure translation, axis n ¯ is along the displacement u of all the points of the body. The motion is then decomposed into a translation, d¯ n, followed by a rotation of vanishing magnitude about the same axis. Equation (5.6) expresses the general motion of a rigid body as screw motion about axis n ¯ . The pitch of the screw, , is deſned as =
2πd . φ
(5.8)
Mozzi-Chasles’ theorem [20, 21] states the results obtained here in a compact manner. Theorem 5.1 (Mozzi-Chasles’ theorem). The most general motion of a rigid body consists of a translation along an axis followed by a rotation about the same axis. The Mozzi-Chasles axis is deſned by its orientation, n ¯ , and the position of one of its points, sQ , given by eq. (5.5). Alternatively, this axis can be deſned by its Pl¨ucker coordinates [19, 22] ⎫ ⎧ n GT ⎬ ⎨ n QMC = − 2 sin φ/2 u (5.9) ⎭ ⎩ n ¯
5.2 Velocity ſeld of a rigid body The time-dependent motion of a rigid body, as depicted in ſg. 5.2, will now be investigated. The structure of the velocity ſeld of the entire rigid body is the focus of the analysis.
164
5 Kinematics of rigid bodies
The inertial velocity of an arbitrary point P is obtained from a time derivative of ˙ s = v+R ˙ RT S , where v = u˙ and v = u˙ are the inertial eq. (5.2), v P = v + R P P P P velocity vectors of point P and A, respectively. This equation becomes vP = v + ω SP ,
(5.10)
˙ RT ) is the angular velocity vector of the rigid body. This relawhere ω = axial(R tionship describes the velocity of an arbitrary point P of the rigid body in terms of v, the velocity of a reference point, and ω, the angular velocity vector of the rigid body. Here again, the choice of reference point A is arbitrary, and hence, eq. (5.10) is not an intrinsic relationship. Reference configuration
u, R
e3
e2
w
E
e03 uP E0 A e01
sP P
SQ
Q
xP
P
e1
i3 Final Configuration
e02 I O
sQ x0, R 0
SP
A
i2
i1
Fig. 5.2. Time-dependent motion of a rigid body.
To obtain a more general description of the velocity ſeld, the following question can be asked: is it possible to ſnd a material point of the rigid body, say point Q, whose velocity vector is parallel to the angular velocity vector? If such a point exists, the following relationship must hold vQ = v + ω S Q = μω,
(5.11)
where μ is an arbitrary scalar that can be found by taking the scalar product of this equation by ω T to ſnd μ = (ω T v)/ω 2 . Equation (5.11) now becomes ω S Q = (ω ω T /ω 2 − I)v = ω ω v/ω 2 , where v/ω 2 = 0. identity (1.33b) was used. This equation can be recast as ω SQ − ω The bracketed term is parallel to the angular velocity vector, which implies S Q − ω v/ω 2 = αω, where α is an arbitrary constant. The location of point Q is now found as ω S Q = αω + 2 v. ω The solution is the locus of points along a straight line parallel to ω, and hence, no unique solution exists for the location of point Q. To remove this ambiguity, point Q will be selected as that at the shortest distance from point A, i.e., ωT S Q = 0. It follows that α = 0, and
5.2 Velocity ſeld of a rigid body
SQ =
ω v. ω2
165
(5.12)
In summary, material point Q of the rigid body exists whose velocity vector is parallel to the angular velocity vector. The location of this point is given by eq. (5.12). Combining eqs. (5.10) and (5.11) now yields vP =
ωT v ω+ω (S P − S Q ) = v Q + ω (S P − S Q ) ω2
(5.13)
This relationship expresses the velocity of material point P of the rigid body as the velocity of point Q, v Q , which is parallel to angular velocity vector ω, followed by a rotation about that same axis. This is referred to as screw motion about axis ω. The screw axis is deſned as the line passing through point Q and parallel to ω. The Pl¨ucker coordinates, Q, of the screw axis are , ω ω − v (5.14) QSA = ω2 ω
5.2.1 Problems Problem 5.1. General motion of a rigid body Figure 5.1 depicts the general motion of a rigid body. Find material point Q of the rigid body whose displacement vector is of minimum norm. Is this point unique? Hint: The condition for minimization of the displacement norm is ||uQ ||2 = minsq [u + (R − I)sq ]T [u + (R − I)sq ]. The minimum displacement norm is found when (R−I)T [u+(R−I)sq ] = (R−I)T uQ = 0. n. The solution of this system then uQ = u + (R − I)sq = d¯
Problem 5.2. Time-dependent motion of a rigid body Figure 5.2 shows the time-dependent motion of a rigid body. Find material point Q of the rigid body whose velocity vector is of minimum norm. Is this point unique? Hint: The condition for minimization of the velocity norm is ||v Q ||2 = minS Q [v + ω S Q ]T [v + ω S Q ]. The minimum T T SQ] = ω v Q = 0. velocity norm is found when ω [v + ω
Problem 5.3. Location of the average velocity point Consider three material points, P, Q, and R, of a rigid body with position vectors xP , xQ , and xR , respectively, and velocity vectors v P , v Q , and v R , respectively. Find the location of point C of the rigid body whose velocity is v C = (v P + v Q + v R )/3.
Problem 5.4. Relating the velocity vectors of three points of a rigid body Consider two material points P and Q of a rigid body and their velocity vectors, v P and v Q , respectively. (1) Find the velocity vector of point R of the rigid body, assuming that points P, Q, and R are not collinear. (2) Is the velocity of point R fully determined?
Problem 5.5. Relating the velocity vectors of three points of a rigid body Consider two material points P and Q of a rigid body and their velocity vectors, v P and v Q , respectively. (1) Find the velocity vector of point R of the rigid body, assuming that points P, Q, and R are collinear. (2) Is the velocity of point R fully determined?
166
5 Kinematics of rigid bodies
Problem 5.6. Computing the angular velocity of a rigid body The velocity vectors of material points P, Q, and R of a rigid body are given as v P , v Q , and v R , respectively. (1) Find the angular velocity vector of the rigid body. (2) State the three scalar constraints that the given velocity vectors must satisfy.
Problem 5.7. Relating the velocity vectors of four points of a rigid body Consider three material points P, Q, and R of a rigid body and their velocities, v P , v Q , and v R , respectively. (1) Find the velocity of point S of the rigid body, assuming that points P, Q, and R are not collinear. (2) State the three scalar constraints that the given velocity vectors must satisfy.
Problem 5.8. Determination of Mozzi-Chasles axis Figure 5.3 depicts a cube of unit size. Point A is selected as the reference point of the body; its displacement vector is denoted u. The rotation of the rigid body is deſned as a rotation of magnitude φ about unit vector n ¯ . (1) Determine the coordinates of a point on the MozziChasles axis characterizing the motion of the rigid body. (2) Find the Pl¨ucker coordinates of the Mozzi-Chasles axis. (3) Compute the intrinsic displacement of the rigid body. (4) Using T eq. A, B, C, and D. Use the following data: u = (5.6), compute the displacements of points 3.2, 4.5, 0.76 m, φ = 1.25 rad, nT = 0.20, −0.26, 0.95 (normalize this vector to make it a unit vector).
i3
b1 D rB, R
i3 i2 A i1
C
i1
B
Fig. 5.3. Arbitrary motion of a rigid body.
O
b3 B
u
B rP
I
*
P b2
i2
Fig. 5.4. Motion of a point deſned with respect to frame F B .
5.3 Relative velocity and acceleration Figure 5.4 depicts a practical situation that occurs in many engineering problem. The motion of a point, P, is deſned with respect to a rigid body associated with frame F B = B, B ∗ = (¯b1 , ¯b2 , ¯b3 ) . Tensor components resolved in basis B ∗ are denoted with superscript (·)∗ . The motion of the rigid body is deſned with respect to an inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. The components of the position vector of point P with respect to point B, resolved in basis B ∗ , are denoted u∗ . The motion of frame F B is deſned by the components of the position vector of point B with respect to point O, denoted r B , and the components of the rotation tensor that bring basis I to basis B ∗ , denoted R, both resolved in basis I.
5.3 Relative velocity and acceleration
167
Consider, for instance, a piece of rotating machinery such as a jet engine or a helicopter rotor. It makes sense to attach a frame at the hub of the rotor: point B is at the hub center point and basis B ∗ rotates with the rotor. The position vector of a point on the blade, say point P, is then most naturally expressed in terms of its components in the hub attached basis B ∗ ; in fact, if the rotor blade is rigid, the components of the position vector of a point on the blade resolved in basis B ∗ are constant. The motion of the hub attached frame, deſned by position vector r B and rotation tensor R, characterize the motion of the hub with respect to an inertial frame. Two important cases will be considered. In the most general case, point P is in relative motion with respect to the rigid body, i.e., the components of the position vector of point P with respect to point B, resolved in the body attached basis, are a function of time, u∗ = u∗ (t). In the second case, point P is a ſxed, or material point of the rigid body, which implies that the components of the position vector of point P with respect to point B, resolved in the body attached basis, are constant in time, u∗ = u∗ (t).
5.3.1 Point P is in motion with respect to the rigid body The inertial velocity and acceleration vectors of point P will now be evaluated assuming that this point is in motion with respect to the rigid body. The inertial position of point P, denoted r P , is expanded as r P = r B + u = rB + R u∗ ,
(5.15)
where u = R u∗ are the components of the position vector of point P with respect to point B resolved in basis I. The inertial velocity vector of point P, denoted v P , now becomes ˙ u∗ + R u˙ ∗ = v + R ˙ RT (r − r ) + R u˙ ∗ vP = vB + R B P B = vB + ω (r P − r B ) + R u˙ ∗ ,
(5.16)
where v B = r˙ B is the inertial velocity of point B and, eq. (5.15), written as u∗ = RT (r P − r B ), is used to eliminate u∗ . The ſrst term of eq. (5.16) represents the inertial velocity of the origin of the body attached frame, F B , and the second term accounts for the effects of its angular velocity. The last term is the relative velocity of point P with respect to point B, resolved in inertial basis I. Of course, the inertial velocity vector of point P could also be resolved in the body attached basis B ∗ ; multiplication by RT yields ∗ u∗ + u˙ ∗ . RT v P = RT v B + ω
(5.17)
Next, the inertial acceleration of point P, denoted aP , is obtained by taking a time derivative of the inertial velocity, eq. (5.16), to ſnd ˙ u˙ ∗ + R u aP = v˙ B + ω ˙ (r P − r B ) + ω (v P − v B ) + R ¨∗.
168
5 Kinematics of rigid bodies
The velocities appearing in the third term are eliminated using eq. (5.16), to ſnd ˙ RT R u˙ ∗ + R u ˙ (r P − r B ) + ω ω (r P − r B ) + R u˙ ∗ + R ¨∗ aP = a B + ω (5.18) = a + (ω ˙ + ω ω )(r − r ) + 2 ωR u˙ ∗ + R u ¨∗ , B
P
B
where aB = v˙ B is the inertial acceleration of point B. The ſrst term of this expression represents the inertial acceleration of the origin of the body attached frame F B , and the second term accounts for the effects of its angular acceleration and velocity. The third term is known as the Coriolis acceleration. Finally, the last term is the relative acceleration of point P with respect to point B, resolved in the inertial basis I. Here again, the inertial acceleration vector of point P could also be resolved in the body attached basis B ∗ ; multiplication by RT yields T ω) ˙ +ω ∗ω ∗ ]u∗ + 2 ω ∗ u˙ ∗ + u ¨∗. RT aP = RT aB + [(R
(5.19)
Term RT ω˙ represents the angular acceleration of the rigid body, resolved in body attached frame B ∗ ; this quantity is readily evaluated as RT ω˙ = RT (R ω ∗ )· = ˙ ω∗ + ω˙ ∗ = ω RT R ∗ ω ∗ + ω˙ ∗ , and ſnally RT ω˙ = ω˙ ∗ .
(5.20)
With this result at hand, the components of the inertial acceleration vector of point P, resolved in basis B ∗ , become ∗
RT aP = RT aB + (ω ˙ + ω ∗ω ∗ )u∗ + 2 ω ∗ u˙ ∗ + u ¨∗.
(5.21)
5.3.2 Point P is a material point of the rigid body If point P is a material point of the rigid body, the components of its position vector with respect to point B, resolved in the body attached basis, are constant in time, u∗ = u∗ (t). The velocity vector of point P, eq. (5.16), now reduces to v P = vB + ω (r P − r B ).
(5.22)
Points B and P are two arbitrary material points of the rigid body. This means that eq. (5.22) relates the velocity vectors of two arbitrary points of the same rigid body. Of course, this relationship is identical to that found earlier, see (5.13), using a different reasoning. When expressed in the body attached basis, the same relationship becomes RT v P = RT v B + ω ∗ u∗ . (5.23) The acceleration vector of point P, eq. (5.18), reduces to ˙ + ω ω )(r P − r B ). aP = aB + (ω
(5.24)
5.3 Relative velocity and acceleration
169
This equation relates the acceleration vectors of two arbitrary points of the same rigid body. When expressed in the body attached basis, the same relationship becomes ∗ RT aP = RT aB + (ω ˙ + ω ∗ω ∗ )u∗ . (5.25) Example 5.1. Velocities and acceleration of a robotic arm Figure 5.5 depicts a robotic system. The shaft is allowed to rotate about axis ¯ı3 with respect to inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. The time-dependent rotation angle of unit vector s¯1 with respect to axis ¯ı1 is denoted α(t). Frame F S = [S, S + = (¯ s1 , s¯2 , s¯3 )] is attached to the shaft at a distance h from the origin of the inertial frame, as indicated on the ſgure; tensor quantities resolved in basis S + are denoted with superscript (·)+ . An arm of length La extends along the direction of axis s¯2 and is attached to the shaft at point S. Finally, a rigid manipulator of length Lb is connected to the arm at point B. The manipulator is allowed to rotate with respect to frame F S , about axis s¯1 . The time¯b2 with respect to axis s¯2 is denoted β(t). dependent rotation angle of unit vector Frame F B = B, B ∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to the manipulator; tensor quantities resolved in basis B ∗ will be denoted with superscript (·)∗ . Determine the velocity and acceleration vectors of point P, located at the tip of the manipulator, at a distance Lb from point B.
b3
s3 = i3
rb
s2
S S
Lb B * B
+
P b2 b(t)
s1 La
b1 = s1
h i3 O I
i1 a(t)
i2
s1 Fig. 5.5. Robotic arm conſguration.
Let Rα and Rβ be the components of the rotation tensors that bring basis I to basis S + and basis S + to basis B ∗ , respectively, both resolved in basis I. This implies s¯1 = Rα¯ı1 and ¯b1 = Rβ s¯1 ; it follows that ¯b1 = Rβ Rα ¯ı1 = R ¯ı1 , where R = Rβ Rα are the components of the rotation tensor that brings basis I to basis B ∗ , resolved in basis I. It is more natural to work with the components of rotation tensor Rβ resolved in basis S + , R+ = RTα Rβ Rα , see eq. (4.29). The components β
170
5 Kinematics of rigid bodies
of rotation tensor R now become ⎤⎡ ⎤ ⎡ ⎤ 1 0 0 Cα −Sα 0 Cα −Sα Cβ Sα Sβ R = Rα R+ = ⎣ Sα Cα 0⎦ ⎣0 Cβ −Sβ ⎦ = ⎣ Sα Cα Cβ −Cα Sβ ⎦ , β 0 0 1 0 Sβ Cβ 0 Sβ Cβ ⎡
are planar rotations about axes ¯ı3 and s¯1 , respectively, see because Rα and R+ β eqs. (4.6) and (4.4), respectively. Notations Sα = sin α and Cα = cos α were used to simplify the writing; similar expressions are used for angle β. The angular velocity of basis B ∗ with respect to basis I, denoted ω, is readily found by using the addition theorem, eq. (4.62), as ω = α¯ ˙ s3 + β˙ ¯b1 = α(S ˙ β ¯b2 + ˙ ¯ ˙ ¯ ¯ ¯ ¯ ˙ β b2 + αC ˙ β b3 . Expressing this tensor relationship in basis Cβ b3 ) + β b1 = β b1 + αS B ∗ yields ω ∗ = β˙ ¯b∗1 + αS ˙ β ¯b∗2 + αC ˙ β ¯b∗3 , and hence, the components of the angular
˙ αS velocity vector expressed in basis B ∗ are ω ∗T = β, ˙ β , αC ˙ β . The components of
˙ α , βS ˙ α , α˙ . this vector in basis I are then evaluated as ω = R ω∗ , to ſnd ωT = βC The position vector of point P with respect to point O is r P = h¯ı3 + La s¯2 + Lb¯b2 = h¯ı3 + (Lb + La Cβ )¯b2 − La Sβ ¯b3 . The inertial velocity of point P, denoted ˙ β ¯b2 − La βC ˙ β ¯b3 + v P = r˙ P , is then obtained from time differentiation v P = −La βS ˙ ˙ ¯ ¯ (Lb + La Cβ )b2 − La Sβ b3 . Time derivatives of unit vectors ¯b2 and ¯b3 are readily evaluated as ¯b˙ 2 = ω ¯b2 ˙ ¯ ¯ and b3 = ω b3 , respectively, see eq. (4.51). Regrouping the terms then yields v P = −(La + Lb Cβ )α˙ ¯b1 + Lb β˙ ¯b3 . Expressing this tensor relationship in basis B ∗ yields RT v P = −(La + Lb Cβ )α˙ ¯b∗1 + Lb β˙ ¯b∗3 , and hence, the components of the
velocity vector expressed in basis B ∗ are (RT v P )T = −(La + Lb Cβ )α, ˙ 0, Lb β˙ . The components of this vector in basis I are then readily obtained as ⎫ ⎧ ⎧ ⎫ ⎨−(La + Lb Cβ )α˙ ⎬ ⎨−(La + Lb Cβ )Cα α˙ + Lb Sα Sβ β˙ ⎬ 0 RT v P = , v P = −(La + Lb Cβ )Sα α˙ − Lb Cα Sβ β˙ . ⎭ ⎩ ⎩ ⎭ Lb β˙ Lb Cβ β˙ Next, the inertial acceleration vector of point P is obtained from a time derivative of its inertial velocity vector aP = Lb Sβ α˙ β˙ ¯b1 − (La + Lb Cβ )¨ α¯b1 − (La + Lb Cβ )α˙ ¯b˙ 1 + Lb β¨¯b3 + Lb β˙ ¯b˙ 3 . Here again, the time derivatives of the unit vectors deſning basis B ∗ are evaluated with the help of eq. (4.51), to yield ˙ β ¯b1 − (La + Lb Cβ )α˙ 2 Cβ + Lb β˙ 2 ¯b2 aP = −(La + Lb Cβ )¨ α + 2Lb α˙ βS + (La + Lb Cβ )α˙ 2 Sβ + Lb β¨ ¯b3 . This expression reveals the components of the inertial acceleration vector, resolved in basis B ∗ , as
5.3 Relative velocity and acceleration
171
⎫ ⎧ ˙ β⎬ α + 2Lb α˙ βS ⎨−(La + Lb Cβ )¨ a∗P = −(La + Lb Cβ )α˙ 2 Cβ − Lb β˙ 2 , ⎭ ⎩ (La + Lb Cβ )α˙ 2 Sβ + Lb β¨ and the corresponding components in basis I are aP = R a∗P , ⎫ ⎧ ¨ β ) + 2Lb α˙ βC ˙ α Sβ ⎬ ¨ Cα ) − Lb Sα (β˙ 2 Cβ − βS ⎨ (La + Lb Cβ )(α˙ 2 Sα − α ¨ β ) + 2Lb α˙ βS ˙ α Sβ . aP = −(La + Lb Cβ )(α˙ 2 Cα + α ¨ Sα ) + Lb Cα (β˙ 2 Cβ − βS ⎭ ⎩ ¨ β) Lb (β˙ 2 Sβ + βC In this example, the components of various vectors were derived in both bases B ∗ and I. Of course, it is possible to work with the components of vectors in any basis, and hence, the choice of a speciſc basis is just a matter of convenience. For this problem, the body attached basis B ∗ is a good choice because the expressions for the components of the velocity and acceleration vectors appear to be simpler in that basis as compared to the corresponding expressions in basis I. Example 5.2. Velocities and acceleration of a spatial mechanism The spatial mechanism depicted in ſg. 5.6 consists of an arm of length La attached to the ground at point S and rotating about axis ¯ı1 of inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]; the time-dependent rotation angle of unit vector s¯2 with respect to axis ¯ı2 is denoted θ(t). Frame F S = [S, S + = (¯ s1 , s¯2 , s¯3 )], is attached to the arm; tensor quantities resolved in basis S + will be denoted with superscript (·)+ . A rigid link connects point P, at the tip of the arm, to point Q that is free to slide along axis ¯ı1 . The link is of length Lb and the distance from point O to point Q is denoted x. Find the inertial velocity and acceleration of point Q and the angular velocity of the link. The inertial position vectors of points P and Q are readily found as r P = La cos θ ¯ı2 + (h + La sin θ)¯ı3 and rQ = x ¯ı1 , respectively. Vector sP Q , extending from point P to point Q, then becomes sP Q = x¯ı1 − La cos θ¯ı2 − (h + La sin θ)¯ı3 . The link is of length Lb , and hence, L2b = sP Q 2 . Expressing the norm of vector sP Q implies that L2b = x2 + L2a + h2 + 2hLa sin θ, which yields the position of point Q along axis ¯ı1 as x = [L2b − L2a − h2 − 2hLa sin θ]1/2 . A ſrst derivative x= of this expression yields xx˙ = −hLa θ˙ cos θ, and a second derivative leads to x¨ −hLa θ¨ cos θ + hLa θ˙2 sin θ − x˙ 2 . The inertial velocity and acceleration of point Q are then v Q = x˙ ¯ı1 and aQ = x ¨ ¯ı1 , respectively. Because points P and Q are two material points of the same rigid body, link PQ, eq. (5.22) implies v Q = v P + ω (r Q −r P ), where v P is the inertial velocity of point P, and ω the angular velocity of the link. This equation can be cast as sP Q ω = −s˙ P Q , where s˙ P Q = v Q − v P . In view of eq. (1.35), this vector product equation admits the following solution sP Q s˙ P Q ω = μsP Q + , (5.26) L2b
172
5 Kinematics of rigid bodies
where μ is an arbitrary constant. This solution exists if and only if sTP Q s˙ P Q , a condition that is always satisſed because vector sP Q is of constant length. The indeterminacy of the solution is due to the fact that the link is free to rotate about its own axis, because its end points rotate freely. s2
i3 s3
P
La
i2
q
P
i2
S
x
s
a1 q
+
h
S
C
Lb
p0
A A
s1
O I x(t)
O I
Q i 1
Fig. 5.6. Conſguration of the spatial mechanism.
a2 d
h i1
Fig. 5.7. Particle P sliding along curve C and through a slotted arm.
The ſrst term of eq. (5.26), μsP Q , reƀects this indeterminacy, which can be removed by assuming that the component of the angular velocity vector along the link vanishes, sTP Q ω = 0, i.e., the link is not allowed to rotate about its own axis. This condition leads to μ = 0, and hence, L2b ω = sP Q s˙ P Q . Expanding the vector product then leads to ˙ a + h sin θ)¯ı1 + xLa θ˙ cos θ − x(h ˙ + La sin θ) ¯ı2 L2b ω =La θ(L + La (xθ˙ sin θ + x˙ cos θ)¯ı3 . This expression gives the components of the angular velocity vector of the link in basis I. Example 5.3. Particle sliding on a curve Figure 5.7 shows particle P sliding along a planar curve ſxed with respect to an inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. A slotted arm pivots about point A whose position vector is rA = d¯ı1 + h¯ı2 . Frame F A = [A, A = (¯ a1 , a ¯2 , a ¯3 )] is attached to the arm. The rotation angle between unit vector ¯ı1 and axis a ¯1 , denoted θ(t), is a given function of time. The particle slides along the curve and through the slot in the arm. Find the velocity and acceleration of the particle along the curve and the relative velocity and acceleration of the particle with respect to the arm. Let x denote the distance between the particle and point A. The inertial position vector of the particle then becomes p0 (s) = d¯ı1 + h¯ı2 + x¯ a1 . This equation involves two unknowns: the position of the particle along the curve, s, and the position of the particle along the arm, x. Projecting this equation along unit
5.3 Relative velocity and acceleration
173
vectors a ¯2 and a ¯1 yields two scalar equations a ¯T2 p0 (s) = −d sin θ + h cos θ, and T x=a ¯1 p0 − (d cos θ + h sin θ), respectively, that can be solved for s and x, respectively, as functions of angle θ. The ſrst equation is a nonlinear scalar equation; in general, several solutions might exist. The given initial conſguration of the system should remove any ambiguity in the solution process at the initial time; for subsequent times, the requirement of a continuous solution for s should remove any further ambiguities. Because particle P slides along the curve, its inertial velocity vector is v P = s˙ t¯, see eq. (2.33). On the other hand, the velocity vector of point P on the arm is v P = ˙a2 . Equating these two expressions yields x¯ ˙ a1 + xθ¯ ˙ a2 . s˙ t¯ = x¯ ˙ a1 + xθ¯
(5.27)
Let Rα be the components of Frenet’s triad, see eq. (4.87), at point P of curve C; hence, t¯ = Rα¯ı1 . Let Rθ be the components of the rotation tensor that bring basis I to basis A; hence, a ¯1 = Rθ¯ı1 . With the help of these deſnitions, eq. (5.27) becomes ⎧ ⎫ ⎧ ⎫ ⎡ ⎤⎧ ⎫ cos(α − θ) sin(α − θ) 0 ⎨ x˙ ⎬ ⎨s˙ ⎬ ⎨ x˙ ⎬ 0 = RTα Rθ xθ˙ = ⎣ − sin(α − θ) cos(α − θ) 0⎦ xθ˙ . (5.28) ⎩ ⎭ ⎩ ⎭ ⎩ ⎭ 0 0 0 1 0 0 The ſrst two scalar equations are readily solved to ſnd x˙ and s˙ as x˙ = xθ˙
cos(α − θ) , sin(α − θ)
s˙ = xθ˙
1 . sin(α − θ)
The relative velocity of the particle with respect to the arm is x, ˙ and s˙ is the speed of the particle along the curve. Both results depend on the angle (α − θ), which represents the relative rotation of Frenet’s triad with respect to basis A. When those two bases are parallel to each other, α = θ and the tangent to the curve is parallel to the arm. Clearly, the mechanism “locks” in such a case, as implied by the inſnite velocities x˙ and s˙ → ∞. The accelerations of the system are obtained by taking a time derivative of eq. (5.28) to ſnd ⎫ ⎧ ⎫ ⎤⎧ ⎤⎧ ⎫ ⎡ ⎡ ¨ ⎬ cos(α − θ) sin(α − θ) 0 ⎨ x 0 1 0 ⎨s˙ ⎬ ⎨s¨⎬ ˙ ⎣−1 0 0⎦ 0 + ⎣ − sin(α − θ) cos(α − θ) 0⎦ x˙ θ˙ + xθ¨ . 0 = (α˙ − θ) ⎩ ⎭ ⎩ ⎭ ⎩ ⎭ 0 0 1 0 000 0 0 ˙ = s Because RTα R ˙ κ∗ , see eq. (4.88), α˙ = s/ρ, ˙ where ρ is the radius of curvature α of curve C. Here again, the ſrst two scalar equations are readily solved to ſnd the desired accelerations, x¨ and s¨, leading to x ¨=
¨ cos(α − θ) − (α˙ − θ) ˙ s˙ (x˙ θ˙ + xθ) , sin(α − θ)
s¨ =
¨ − (α˙ − θ) ˙ s˙ (x˙ θ˙ + xθ) . sin(α − θ)
Several observation can be made concerning this example. This problem involves several bases: the inertial basis, I, the arm attached basis, A, and Frenet’s triad for
174
5 Kinematics of rigid bodies
curve C. The components of the velocity vector of the particle are most easily expressed in the arm attached basis, A. Because the particle slides along curve C, it is natural to use Frenet’s triad of the curve, since its properties are also expressed naturally in this triad. The analyst should always use the most appropriate basis to express the various kinematic characteristics of the system; typically, this implies selecting the basis that leads to the simplest, or most natural, analytical expressions. Once kinematics conditions have been expressed in different bases, it is often necessary to “reconcile” the various equations, i.e., express them in a common basis. This operation is most effectively achieved with the help of rotation tensors and the systematic use of their orthogonality property: the inverse of the rotation tensor equals its transpose, and the time derivative of the rotation tensor calls for the use of the angular velocity vector. 5.3.3 Problems Problem 5.9. Retraction of a landing gear Figure 5.8 depicts the extension of a simple landing gear. It consists of a link of length L = 1.2 m and of a wheel. The length (t) of the hydraulic actuator is a given function of time: (t) = h + g[1 − cos πt/T ], where g = [ (L2 /2 + hL + h2 ) − h]/2, h = 0.6 m and T = 1.5 s is the total time required for extending the landing gear. (1) Compute and plot the angular velocity of the link as a function of time. (2) Compute and plot the angular acceleration of the link as a function of time. (3) Compute the inertial velocity vector of point P at the tip of the link. Plot the components of this vector resolved in I. (4) Compute the inertial acceleration vector of point P. Plot the components of this vector resolved in I.
A L/2 i1
i2 O
I
L/2
R
L/2 h
T M
q Retracted position
Lc
q d i2
W
L/2 WExtended position
Fig. 5.8. Landing gear in retracted and extended conſgurations.
I
Lb P O
i1
Fig. 5.9. Quick return mechanism conſguration.
Problem 5.10. Quick return mechanism The quick return mechanism shown in ſg. 5.9 consists of a crank of length Lc = 0.30 m and of a bar of length Lb = 1.6 m. The crank is pinned at point R and the bar is pinned at point O. The distance between these two points is d = 0.35 m. At point P, a slider allows the tip
5.3 Relative velocity and acceleration
175
of the crank to slide along the bar. The time history of angle θ is θ(t) = ωt, where ω = 1.25 rad/s. (1) On the same graph, plot the time history of the angular velocities of the crank and bar for two revolutions of the crank. (2) On the same graph, plot the angular accelerations of the crank and bar. (3) Compute the inertial velocity vector of point T at the tip of the bar. Plot the components of this vector resolved in I. (4) Compute the inertial acceleration vector of point T. Plot the components of this vector resolved in I.
Problem 5.11. Crank-slider mechanism Figure 5.10 depicts a crank-slider mechanism. The crank of length 1 = 0.20 m rotates counterclockwise at a constant angular velocity ω1 = 200 rad/s and is connected to the ground at point O. At point A the crank connects to a linkage of length 2 = 0.6 m. Finally, at point B, this linkage connects of a piston that is constrained to move in the horizontal direction. The angular position of the crank is θ(t) = ω1 t. (1) Compute the angular velocity ω2 of the linkage and the velocity vp = x˙ of the piston. (2) Plot the horizontal position x of the piston as a function of time. (3) On one graph, plot the angles θ and φ as a function of time. (4) On one graph, plot the angular velocities ω1 and ω2 of the two bodies as a function of time. (5) Plot the velocity vp of the piston as a function of time. (6) Compute the angular acceleration ¨ of the piston. (7) On one graph, plot the angular α2 of the linkage and the acceleration ap = x acceleration α1 and α2 of the two bodies as a function of time. (8) Plot the acceleration ap of the piston as a function of time. For all plots, the time scale should cover a complete revolution of the crank, i.e., t ∈ [0, 2π/ω1 ].
i2
i2
A l1 O
l2 f
q x
i1 B
Fig. 5.10. Crank-slider mechanism rotating at a constant angular velocity.
O R
w L/2
P q
f i1
d
C
A k T
Fig. 5.11. Locking mechanism conſguration.
Problem 5.12. Locking mechanism Figure 5.11 shows a locking mechanism used in the deployment of large space structures. When the homogeneous disk of radius R rotates about its ſxed point O, bar PT of length L slides at point A through a collar that is allowed to swivel about the pin at point A. The bar has a length L, and w(t) denotes the part of the bar between point P and A. The time history of angle θ is prescribed as θ(t) = π(1 + cos πt/T )/4. (1) On the same graph, plot angles θ and ˙ (3) Plot θ¨ and φ. ¨ (4) Plot w. (5) Plot w. φ as a function of time. (2) Plot θ˙ and φ. ˙ (6) Plot w. ¨ Use the following data: R = 0.15 m; d = 0.2 m; L = 0.4 m; T = 2 s. Present the response of the system for a duration of 2 s.
Problem 5.13. Crank-slider mechanism Figure 5.12 depicts a crank-slider mechanism. The crank of length = 0.30 m rotates counterclockwise at a constant angular velocity ω1 = 200 rad/s and is connected to the ground at point O. At point B, the crank connects to a linkage that slides along point P, a ſxed point in space, located at a distance d = 0.6 m from point O. The angular position of the crank is
176
5 Kinematics of rigid bodies
θ(t) = ω1 t. Let w denote the distance from point B to point P. Point T is located at the tip of the linkage, at a distance b = 1.2 m from point B. (1) On one graph, plot the angles θ and φ as a function of time. (2) Plot the distance w as a function of time. (3) Compute the angular velocity ω2 of the linkage and the relative velocity, w, ˙ of point P with respect to the linkage. (4) On one graph, plot the angular velocities ω1 and ω2 of the two bodies as a function of time. (5) Plot the relative velocity, w, ˙ of point P with respect to the linkage as a function of time. ¨ of (6) Compute the angular acceleration, α2 , of the linkage and the relative acceleration, w, point P with respect to the linkage. (7) On one graph, plot the angular acceleration α1 and α2 of the two bodies as a function of time. (8) Plot the relative acceleration, w, ¨ of point P with respect to the linkage as a function of time. (9) On one graph, plot the horizontal and vertical components of the inertial velocity vector of point T. (10) On one graph, plot the horizontal and vertical components of the inertial acceleration vector of point T. For all plots, the time scale should cover a complete revolution of the crank, i.e., t ∈ [0, 2π/ω1 ].
i2
O
l
P
s
B
b
w d
P
C
b2
q f T
Fig. 5.12. Crank-slider mechanism rotating at a constant angular velocity.
O
I
L
p0
b1 a a 1
q
i1
A d
a2
Fig. 5.13. Rotating curve connected to link.
Problem 5.14. Rotating curve connected to link Planar curve C is embedded into a rigid body that rotates with respect to an inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )], as depicted in ſg. 5.13. A frame F B = O, B = (¯b1 , ¯b2 , ¯b3 ) , is attached to the body and the rotation angle is a known quantity α(t). A link is attached to inertial point A whose position vector is rA = d¯ı1 . The other end of the link is connected to a particle that slides along curve C. A frame F A = [A, A = (¯ a1 , a ¯2 , a ¯3 )], is attached to the link; the rotation angle for frame F A is denoted θ. Let Fβ∗ (s) be the components of Frenet’s triad of curve C resolved in basis B and β the angle that brings basis B to Frenet’s triad. (1) Find a scalar equation to determine the location s of point P along curve C. Is the solution uniquely deſned? (2) Find a scalar equation to determine angle θ. (3) Determine the angular velocity of the link. (4) Determine the speed s˙ of the particle along curve C. (5) Determine the angular acceleration of the link. (6) Determine the acceleration s¨ of the particle along curve C. (7) Under what condition does the mechanism lock? Explain your answer in geometric terms. Express your answers in terms of the angles α, θ and β.
Problem 5.15. Spinning disk mounted on rotating arm The system depicted in ſg. 4.9 consists of a shaft of height h rigidly connected to an arm of length La and of a spinning disk of radius R mounted at the free end of the s1 , s¯2 , s¯3 ) is attached to the shaft at point S and frame arm. Frame F S = S, S + = (¯ F D = C, B∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to the disk at point C. Superscripts (·)+ and (·)∗ will be used to denote tensor components resolved in bases S + and B∗ , respectively. Angle α(t) and β(t) are the magnitudes of the planar rotations about axis ¯ı3 and s¯1 , respectively,
5.3 Relative velocity and acceleration
177
that bring basis I to S + and basis S + to B∗ , respectively. (1) Find the angular velocity vector of basis B∗ with respect to basis I. (2) Find the components of this vector in basis I. (3) Find the components of this vector in basis B∗ . (4) Find the angular acceleration vector of basis B∗ with respect to basis I. (5) Find the components of this vector in basis I. (6) Find the components of this vector in basis B∗ .
Problem 5.16. Robotic system Figure 5.5 depicts a robotic system. The shaft is allowed to rotate with respect to an inertial frame F I , about axis ¯ı3 ; the time-dependent angle of rotation is denoted α(t). A frame F S = [S, S = (¯ s1 , s¯2 , s¯3 )] is attached to the shaft at a distance h from the origin of the inertial frame, as indicated on the ſgure. An arm of length La = 1.2 m, extending along the direction of axis s¯2 , is attached to the shaft at point S. Finally, a rigid manipulator of length Lb = 0.5 m is connected to the arm at point B. The manipulator is allowed to rotate with respect to B frame F S , about axis s¯1 ; the time-dependent angle of rotation is denoted β(t). Frame F = B, B = (¯b1 , ¯b2 , ¯b3 ) is attached to the manipulator. Angles α(t) and β(t) are prescribed as α(t) = π(1 − cos πt/T )/2 and β(t) = 2π (1 − cos πt/T ), where T = 2 s. (1) Compute the angular velocity vector ω of the manipulator with respect to the inertial system. On one graph, plot the components of this vector in basis B. (2) On one graph, plot the components of this vector in basis I. (3) Compute the position vector rP of point P with respect to point O. On one graph, plot the components of this vector in basis I. (4) Evaluate the inertial velocity vector of point P. On one graph, plot the components of this vector in basis B. (5) On one graph, plot the components of this vector in basis I. (6) Compute the inertial acceleration of point P. On one graph, plot the components of this vector in basis B. (7) On one graph, plot the components of this vector in basis I.
Problem 5.17. Swiveling plate Figure 5.14 depicts a homogeneous, rectangular plate of height a, width b and mass m connected to the ground by a rigid, massless link of length d. At point O, a bearing allows the link to rotate with respect to axis ¯ı3 , whereas at point B, the plate is free to rotate with respect to the link about axis a ¯1 . Three frames will be used in this problem: the inertial frame, F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )], a frame attached to the link, F A = [O, A = (¯ a1 , a ¯2 , a ¯3 )], and ſnally, a frame attached to the plate at its center of mass, F B = C, B = (¯b1 , ¯b2 , ¯b3 ) . A planar rotation of magnitude α about axis ¯ı3 brings basis I to basis A, whereas a planar rotation of magnitude β about axis a ¯1 brings basis A to basis B. (1) Find the components of the inertial position vector of point P in basis B. (2) Find the components of the inertial velocity vector of point P in basis B. (3) Find the components of the inertial acceleration vector of point P in basis B.
Problem 5.18. Robotic system with a sliding manipulator Figure 5.15 depicts a robotic system with a sliding manipulator. The shaft is allowed to rotate with respect to an inertial frame F I , about axis ¯ı3 ; the time-dependent angle of rotation is denoted α(t). A frame F S = [S, S = (¯ s1 , s¯2 , s¯3 )] is attached to the shaft at a distance h from the origin of the inertial frame, as indicated on the ſgure. An arm of length Lb , connected to the shaft at point S is allowed to pivot with respect to the shaft about axis s¯1 ; the time-dependent angle of rotation is denoted β(t). A frame F B = B, B = (¯b1 , ¯b2 , ¯b3 ) is attached to the arm. Finally, a rigid manipulator slides with respect to the arm along axis ¯b2 ; the displacement of the manipulator is denoted u(t). Angles α(t) and β(t) and displacement u(t) are known, prescribed functions of time. (1) Compute the angular velocity vector ω of the manipulator with respect to the inertial system. (2) Give the components of this vector in
178
5 Kinematics of rigid bodies
a
O
b3
a1
a/2
B
a/2
b2 i2
b
b2 a2
P
h
b(t) SB i3
b1 = s1
C b/2
P
b2
b3 B
i1
d a2
u(t)
s3 Lb
i3 = a3
O b/2 b1
Fig. 5.14. Conſguration of the swiveling plate.
i1
I a(t)
S
s2
i2
Fig. 5.15. Robotic arm with a sliding manipulator.
basis B. (3) Compute the position vector r P of point P with respect to point O. (4) Evaluate the inertial velocity vector of point P. (5) Compute the inertial acceleration of point P.
Problem 5.19. Robotic system with a sliding manipulator Figure 5.15 depicts a robotic system with a sliding manipulator. The shaft is allowed to rotate with respect to an inertial frame F I , about axis ¯ı3 ; the time-dependent angle of rotation is s1 , s¯2 , s¯3 )] is attached to the shaft at a distance h = 1 m denoted α(t). Frame F S = [S, S = (¯ from the origin of the inertial frame, as indicated on the ſgure. An arm of length Lb = 0.75 m, connected to the shaft at point S is allowed to pivot with respect to the shaft about axis s¯1 ; the time-dependent angle of rotation is denoted β(t). A frame F B = B, B = (¯b1 , ¯b2 , ¯b3 ) is attached to the arm. Finally, a rigid manipulator slides with respect to the arm along axis ¯b2 ; the displacement of the manipulator is denoted u(t). Angles α(t) and β(t) are prescribed as α(t) = π(1 − cos πt/T )/2 and β(t) = π(1 − cos πt/T )/6, where T = 2 s. The sliding motion is prescribed as u(t) = 0.5 (1 − exp(−5t/T )) m. (1) Compute the angular velocity vector ω of the manipulator with respect to the inertial system. On one graph, plot the components of this vector in basis B. (2) On one graph, plot the components of this vector in basis I. (3) Compute the position vector r P of point P with respect to point O. On one graph, plot the components of this vector in basis I. (4) Evaluate the inertial velocity vector of point P. On one graph, plot the components of this vector in basis B. (5) On one graph, plot the components of this vector in basis I. (6) Compute the inertial acceleration of point P. On one graph, plot the components of this vector in basis B. (7) On one graph, plot the components of this vector in basis I. For all plots, the time scale should cover t ∈ [0, 4T ] s.
Problem 5.20. Robotic system with a manipulator on screw joint Consider the robotic system with a manipulator mounted on a screw joint depicted in ſg. 5.16. The shaft is allowed to rotate with respect to an inertial frame F I , about axis ¯ı3 ; the times1 , s¯2 , s¯3 )] is attached to dependent angle of rotation is denoted α(t). Frame F S = [S, S = (¯ the shaft at a distance h = 0.5 m from the origin of the inertial frame, as indicated on the ſgure. An arm of length La = 0.6 m, extending along the direction of axis s¯2 , is attached to the shaft at point S. Finally, a rigid manipulator is connected to the arm by means of a screw joint. Frame F B = B, B = (¯b1 , ¯b2 , ¯b3 ) is attached to the manipulator. The manipulator slides and rotates with respect to the arm; the sliding distance is denoted u(t) and the rotation angle is β(t). The screw joint implies the following relationship between these two motions: u(t) = β(t)/(2π), where = 0.5 m is the pitch of the screw. Angles α(t) and β(t) are
5.4 Contact between rigid bodies
179
prescribed as α(t) = π/2 (1 − cos πt/T ) and β(t) = 5π t/T , where T = 2 s. (1) Compute the angular velocity vector ω of the manipulator with respect to the inertial system. On one graph, plot the components of this vector in basis B. (2) On one graph, plot the components of this vector in basis I. (3) Compute the position vector r P of point P with respect to point O; point P is located at a distance Lb = 0.25 m from the manipulator elbow. On one graph, plot the components of this vector in basis I. (4) Evaluate the inertial velocity vector of point P. On one graph, plot the components of this vector in basis B. (5) On one graph, plot the components of this vector in basis I. (6) Compute the inertial acceleration of point P. On one graph, plot the components of this vector in basis B. (7) On one graph, plot the components of this vector in basis I. For all plots, the time scale should cover t ∈ [0, 2T ] s.
s3
b3 b u
La
S S h s1 i3 i1 a I s1
s2
B P b1
B b2 Lb
O i2
Fig. 5.16. Robotic arm with manipulator.
i1 x
T q C
O I
R
B
A e1 e2
i2
Fig. 5.17. Wheel rolling between two plates.
Problem 5.21. Wheel rolling between two plates Figure 5.17 depicts a wheel of radius R rolling without sliding between two horizontal plates. The top plate moves horizontally and is at a distance x from axis ¯ı1 . Frame F = [C, E = (¯ e1 , e¯2 )] rotates with the wheel. A planar rotation of magnitude θ(t) about unit vector ¯ı3 brings basis I to basis E. (1) Find the velocity vector of material point A of the wheel. (2) Resolve this vector in basis I then in basis E. (3) Find the acceleration vector of material point A of the wheel. (2) Resolve this vector in basis I then in basis E .
5.4 Contact between rigid bodies Many commonly used mechanical systems involve contacting rigid bodies. Figure 5.18 shows two rigid bodies, denoted body k and body , with outer shapes deſned by two closed curves, denoted curves Ck and C , respectively. Point P is the instantaneous point of contact between the two rigid bodies. For the purpose of illustration, the two bodies are assumed to undergo planar motion and rotate about ſxed inertial points Ok and O , respectively. The mechanism shown in ſg. 5.18 is generally called a cam-follower pair. The angular motion of body k, called the cam, is typically prescribed to be a constant angular speed, say Ω. As the cam rotates, body , called the follower, is assumed to remain in contact with the cam at all times at a single point. The cam-follower pair transforms the constant angular motion of the cam into a rocking motion of the
180
5 Kinematics of rigid bodies
follower. By tailoring the shapes of curves Ck and C , desirable periodic schedules of the follower can be achieved. The contact point between the two rigid bodies is not a material point of either bodies. At the cam rotates, the location of the contact point coincides with a different material point of the cam at each instant: the contact point slides along curve Ck . Similarly, the contact point slides along curve C because the location of the contact point coincides with a different material point of the follower at each instant. At instant t, let K and L be i2 n the material points of the cam and follower, respectively, that Body l vPk vPl are instantaneously coincident t el l 2 C with the contact point, P(t). To k l P e2 e1 avoid confusion, points K and L k k rP rPl e1 are not shown in ſg. 5.18 bel k cause their location is identical O O i1 to that of point P. Let rK and r L k Body k C be the position vectors of material points K and L with respect Fig. 5.18. Body k and body in contact at point P. to point O, respectively. Furthermore, the position vector of the instantaneous point of contact with respect to point O is denoted r P (t). Given these deſnitions, r K = rL = rP (t). At instant t > t, K and L are the material points of the cam and follower, respectively, that are instantaneously coincident with the contact point, P(t ). If r K and rL are the position vectors of material points K and L with respect to point O, respectively, and if r P (t ) denotes the position vector of the instantaneous point of contact with respect to point O, it is still true that r K = r L = r P (t ). In general, however, r K = r K because points K and K are two different material points of the cam and r L = r L because points L and L are two different material points of the follower. Because the instantaneous point of contact slides over curves Ck and C , r P (t) = r P (t ) and furthermore, rK = r P (t ) and r L = rP (t ). Because point K is a material point of body k, its inertial velocity and acceleration vectors can be evaluated using eqs. (5.22) and (5.24), respectively. The relative position vectors of point P with respect to points Ok and O are denoted r kP and rP , respectively. Let point Ok be the reference point for body k; the velocity of material point K, denoted v kP , is given by eq. (5.22) as v kP = ω k rkP , where ωk is the angular k k velocity of body k. Vectors v P and r P are perpendicular to each other, as illustrated in ſg. 5.18. A similar expression holds for the velocity of point L, denoted v P . The components of the same velocity vectors in the body attached basis are given by eq. (5.23). Let F k = Ok , B k = (¯ ek1 , e¯k2 ) be a frame attached to the cam, as shown in ſg. 5.18, and notation (·)∗ indicates tensor components resolved in basis B k . The components of the inertial velocity vector of point K resolved in this basis ∗k are then v ∗k ∗k r ∗k P = ω P ; because array r P stores the components of the relative position vector of material point K of the cam resolved in a cam attached basis, this array is time-independent.
5.4 Contact between rigid bodies
181
It is assumed that the two bodies are in contact at a single point, and the unit tangent vectors to curves Ck and C at point P are coincident and denoted t¯. The unit vector perpendicular to this common tangent is the unit normal vector, denoted n ¯ . As discussed in section 2.2, the unit vector tangent to curve Ck is given by eq. (2.5) and its orientation depends on the curvilinear variable used to parameterize the curve. If curves Ck and C are both parameterized in the counterclockwise direction, and if the unit vectors tangent to the two curves are denoted t¯k and t¯ , respectively, and ſg. 5.18 shows that at the instantaneous contact point, t¯ = −t¯k = t¯ . For the conſguration illustrated in the ſgure, n ¯ = −¯ nk = −¯ n . If the two bodies of the cam-follower pair remain in contact at a single point, the normal projections of the velocity vectors of the material points that are instantaneously coincident with the contact point must be identical, n ¯ T v kP = n ¯ T v P .
(5.29)
If this condition were not satisſed, the two bodies would either separate or interpenetrate and contact at a single point would not be maintained. The relative velocity of the material points that are instantaneously coincident with the contact point, denoted v rP , is nT v P )¯ n + (t¯T v P )t¯ − (¯ nT v kP )¯ n − (t¯T v kP )t¯ v rP = v P − v kP = (¯ = (t¯T v P )t¯ − (t¯T v kP )t¯ = (t¯T v P ) − (t¯T v kP ) t¯.
(5.30)
where the third equality follows from the contact condition, eq. (5.29). As expected, the relative velocity of the material points that are instantaneously located at the contact point is oriented along to the common tangent vector at this point. Smooth operation of cam-follower systems generally require a single point contact between the two rigid bodies. For arbitrary shapes of the bounding curves, contact could occur at two or more points simultaneously, or even along a line if portions of the outer curves are straight, for instance. Such situations rarely occur in mechanical systems. To guarantee single point contact, the bounding curves must satisfy speciſc conditions at the contact point. For instance, a sufſcient condition for single point contact is for the cam and follower to be bounded by strictly convex curves. For the case illustrated in ſg. 5.18, the cam and follower are convex and concave, respectively, at the point of contact. For single point contact to occur, the cam’s radius of curvature must be smaller than that of the follower. The discussion has focused thus far on contacting rigid bodies undergoing planar motion. If the problem is fully three-dimensional, it becomes necessary to deſne the external surfaces of bodies k and , denoted Sk and S , respectively. If the contact between the two bodies occurs at a single point, the planes tangent to surfaces Sk and S at the instantaneous contact point must coincide and it is still possible to deſne a unit normal vector that is perpendicular to this common tangent plane. The contact condition expressed by eq. (5.29) still holds for this problem, but the relative velocity vector will have components along two directions within the common tangent plane.
182
5 Kinematics of rigid bodies
Example 5.4. Cam-follower pair Consider the planar cam-follower pair depicted in ſg. 5.19. The cam rotates at a constant angular velocity, Ω, about ſxed inertial point O. Frame F I = [O, I = (¯ı1 , ¯ı2 )] is inertial and frame F E = [O, E = (¯ e1 , e¯2 )] is attached to the cam. The external shape of the cam is deſned by curve C and the follower slides over this curve; the contact point between the cam and follower is denoted P. The motion of the follower is constrained to be along axis ¯ı2 and its displacement is denoted x. Find the velocity and acceleration of the follower.
i2 x h e2
P
er a e1 q e1
q
i1
g
r
eq O
a
C
Fig. 5.19. Conſguration of the cam-follower pair.
Let angle θ deſne the rotation of the cam; it follows that θ˙ = Ω. The geometry of curve C is deſned in polar coordinates, as discussed in example 2.3 on page 37, and angle α deſnes an arbitrary parameterization of the curve. The shape of the curve is then deſned by a given function, r = r(α), and notation (·) indicates a derivative with respect to angle α. Given the conſguration of the system, the tangent to curve C at the point of contact must remain horizontal at all times; this implies θ + α + γ = π.
(5.31)
It then follows that sin(θ + α) = Sγ = r/p1 , where Sγ = sin γ and the second equality results from eq. (2.28a). Similarly, cos(θ + α) = −Cγ = −r /p1 , where Cγ = cos γ and the second equality results from eq. (2.28b). Eliminating p1 from these two relationships leads to r(α) cos(θ + α) + r (α) sin(θ + α) = 0. For a given value of angle θ, this transcendental equation can be solved for angle α, which determines the location of the point of contact between the cam and the follower. It then becomes possible to evaluate r(α), r (α), and angle γ then follows from eqs. (2.28a) and (2.28b). A time derivative of eq. (5.31) yields Ω + α˙ + γ˙ = 0. Introducing eqs. (2.29) and (2.32) then yields r˙ = −ΩρCγ . The velocity of the material point of the cam located at the instantaneous point of contact between the cam and the follower is Ωr¯ eθ . The velocity of the material
5.4 Contact between rigid bodies
183
point of the follower at the same location is −x¯ ˙ ı2 . The contact condition for these two bodies, eq. (5.29), then implies ¯ıT2 Ωr¯ eθ = −¯ıT2 x¯ ˙ ı2 , or x˙ = ΩrCγ . The acceleration of the follower is obtained by taking a time derivative of this expression to ſnd x ¨ = Ω rC ˙ γ − ΩrγS ˙ γ . Introducing eq. (2.32) then yields x ¨ = (1 − Sγ r/ρ)Ω r/C ˙ γ and ſnally x¨ = Ω 2 (rSγ − ρ).
(5.32)
5.4.1 Problems Problem 5.22. Cam-follower pair questions Figure 5.20 shows the instantaneous point of contact, P, between to rigid bodies, denoted body k and body . Let t¯ be the unit vector tangent to the curves bounding the two bodies and n ¯ is perpendicular to this tangent vector. Vectors r kP and r P are the relative position vectors of point P with respect to points Ok and O , respectively. (1) Is θ˙ k the angular velocity of body k? (2) Let v kP and v P be the velocity vectors of the material points of body k and , respectively, that are coincident with the instantaneous point of contact, P. An analyst has evaluated these vectors, which are shown in ſg. 5.20. Are his predictions correct? (3) Is the relative velocity of body with respect to body k parallel to unit vector n ¯ ? (4) If v P = 4.5 k m/s in the upwards direction, determine v P . (5) Find the relative velocity vector of body with respect to body k. Justify all your answers; YES/NO answers are not sufſcient.
v
l
O
rPl
vPk
l P
P
15o
k P
r
q
q
Body l i1
Body k
l
g
i2
n
i2
k
t 50 O
o
k
Fig. 5.20. Conſguration of the cam-follower system.
P
eq e2 C r O
er a q
e1 e1 f
a
i1 f
q
A
d Fig. 5.21. Conſguration of the cam-follower system.
Problem 5.23. Cam-rocking bar pair Consider the planar cam-rocking bar pair depicted in ſg. 5.21. The cam rotates at a constant angular velocity, Ω, about ſxed inertial point O. Frame F I = [O, I = (¯ı1 , ¯ı2 )] is inertial and e1 , e¯2 )] is attached to the cam. The external shape of the cam is deſned frame F E = [O, E = (¯ by curve C and the rocking bar slides over this curve; the contact point between the cam and bar is denoted P. The bar is pivoted about point A and the distance between point O and A is denoted d. (1) Plot the curve deſning the outer shape of the cam. (2) Plot the curvature of curve C as a function of α ∈ [0, 360] deg. (3) Find the location of contact point P as a function of the cam rotation angle θ. This step requires the numerical solution of a transcendental equation
184
5 Kinematics of rigid bodies
for each value of angle θ. (4) On one graph, plot angles α, γ, and φ at the point of contact for θ ∈ [0, 360] deg. (5) On one graph, plot r, r , and r at the point of contact for θ ∈ [0, 360] ˙ deg. (6) Plot the non-dimensional angular velocity of the bar, φ/Ω, for θ ∈ [0, 360] deg. (7) 2 ¨ Plot the non-dimensional angular acceleration of the bar, φ/Ω , for θ ∈ [0, 360] deg. Use the following data: r(α) = r0 + r1c cos α + r2c cos 2α, r0 = 1, r1c = 0.54, and r2c = 0.18.
Problem 5.24. Cam-follower pair Consider the planar cam-follower pair depicted in ſg. 5.19. The cam rotates at a constant angular velocity, Ω, about ſxed inertial point O. Frame F I = [O, I = (¯ı1 , ¯ı2 )] is inertial e1 , e¯2 )] is attached to the cam. The external shape of the cam is and frame F E = [O, E = (¯ deſned by curve C and the follower slides over this curve; the contact point between the cam and follower is denoted P. The motion of the follower is constrained to be along axis ¯ı2 and its displacement is denoted x. (1) Plot the curve deſning the outer shape of the cam. (2) Plot the curvature of curve C as a function of α ∈ [0, 360] deg. (3) Find the location of contact point P as a function of the cam rotation angle θ. This step requires the numerical solution of a transcendental equation for each value of angle θ. (4) On one graph, plot angles α and γ at the point of contact versus θ ∈ [0, 360] deg. (5) On one graph, plot r, r , and r at the point of contact versus θ. (6) Plot the non-dimensional velocity of the follower, x/(Ωr ˙ 0 ), versus θ. (7) Plot the non-dimensional acceleration of the follower, x ¨/(Ω 2 r0 ), versus θ. Use the following data: r(α) = r0 + r1c cos α + r2c cos 2α, r0 = 1, r1c = 0.5, and r2c = 0.18.
Problem 5.25. Cam-push rod pair Figure 5.22 depicts a planar cam-push rod pair. The cam rotates at a constant angular velocity, Ω, about ſxed inertial point O. Frame F I = [O, I = (¯ı1 , ¯ı2 )] is inertial and frame e1 , e¯2 )] is attached to the cam. The external shape of the cam is deſned F E = [O, E = (¯ by curve C and the push rod slides over this curve; the contact point between the cam and push rod is denoted P. The push rod’s axis is at a distance d from axis ¯ı2 and its support at a distance h from axis ¯ı1 . (1) Plot the curve deſning the outer shape of the cam. (2) Plot the curvature of curve C as a function of α ∈ [0, 360] deg. (3) Find the location of contact point P as a function of the cam rotation angle θ. This step requires the numerical solution of a transcendental equation for each value of angle θ. (4) On one graph, plot angles α, β, and γ at the point of contact versus θ ∈ [0, 360] deg. (5) On one graph, plot r, r , and r at the point of contact versus θ. (6) Plot the non-dimensional position of the push rod, x/r0 , versus θ. (7) Plot the non-dimensional angular velocity of the push rod, x/(Ωr ˙ 0 ), versus θ. (8) Plot the non-dimensional angular acceleration of the push rod, x ¨/(Ω 2 r0 ), versus θ. Use the following data: r(α) = r0 + r1c cos α + r2c cos 2α, r0 = 1, r1c = 0.50, r2c = 0.18, d¯ = d/r0 = 0.5, ¯ = h/r0 = 1.8. h
Problem 5.26. Oscillating disk with sliding bar Figure 5.23 shows an oscillating disk (body ) pinned to the ground at its center point C, while a bar of length L, pinned at point O, slides in a radial track of the disk. The angular motion of the disk is prescribed as φ = φ0 sin ωt. The distance between points O and C is denoted b. The angular position of the bar (body k) is denoted θ and the point of contact between the bar and the track is at a distance r from the center of the disk. (1) On one graph, plot angles φ and θ versus τ . (2) Plot r¯ = r/L versus τ . (3) On one graph, plot angular velocities φ and θ versus τ . (4) Plot r¯ versus τ . (5) On one graph, plot angular accelerations φ and θ versus τ . (6) Plot r¯ versus τ . (7) Evaluate the velocities of the material points of body k and , denoted v kP and v P , respectively, that are instantaneously located at the point of contact of the two bodies. (8) Verify that eq. (5.29) is satisſed for your solution. (9) Evaluate the relative velocity of body with respect to body k, denoted v rP . (10) Let v P be the velocity vector of
5.4 Contact between rigid bodies
i2
185
i2
er d
x h e2
e1
P a
t r
eq
O
O
P f
i1
C
i1
q
r
L q
body k
b
body l
C
Fig. 5.22. Conſguration of the cam-push rod pair.
Fig. 5.23. Conſguration of the oscillating disk with sliding bar.
the material point at the tip of the bar. On one graph, plot the inertial components of v rP /(ωL) and v P /(ωL). Use the following data: ¯b = b/L = 0.75, φ0 = π/3. Use non-dimensional time τ = ωt and notation (·) indicates a derivative with respect to τ . Present all the results for τ ∈ [0, 2π].
Problem 5.27. Piston with track and pin Figure 5.24 depicts an oscillating piston with a track along which a vertical pin is sliding. The motion of the piston is prescribed as x = x0 (1 − cos ωt)/2. The shape of the track is deſned ¯ = x/L and u ¯ = u/L versus by an arbitrary parameterization, p0 (η). (1) On one graph, plot x τ . (2) Plot η versus τ . (3) On one graph, plot x ¯ and u ¯ versus τ . (4) Plot η versus τ . (5) On one graph, plot x ¯ and u ¯ versus τ . (6) Plot η versus τ . (7) Evaluate the relative velocity vector of body with respect to body k. (8) Evaluate the tangential and normal components of this relative velocity vector. (9) Plot the tangential components of the relative velocity vector versus τ . Use the following data: a ¯ = a/L = 1.5, ¯b = b/L = 3, x ¯0 = x0 /L = 1, ¯ = h/L = 1, and p (η) = aη¯ e + bη 2 e¯2 . Use non-dimensional time τ = ωt and notation h 1 0 (·) indicates a derivative with respect to τ . Present all the results for τ ∈ [0, 2π].
i2 e2 x
Body l
Body l u
L h
P p0(h) Body k
La
S
i2
Body k
w
h i1
e1 Fig. 5.24. Conſguration of sliding piston with track and pin.
A
q i1
d
f O
Fig. 5.25. Conſguration of the two-bar mechanism.
Problem 5.28. Two-bar mechanism Figure 5.25 shows a planar, two-bar mechanism. Crank OS is of length La and rotates at a constant angular velocity, Ω. Its tip slides along bar AS. The distance between points A and
186
5 Kinematics of rigid bodies
O is denoted d and that between point A and S is denoted w. (1) On one graph, plot angles φ and θ versus τ . (2) Plot w ¯ = w/d versus τ . (3) On one graph, plot angular velocities φ and θ versus τ . (4) Plot w ¯ versus τ . (5) On one graph, plot angular accelerations φ and θ versus τ . (6) Plot w ¯ versus τ . (7) Evaluate the relative velocity vector of body with respect to body k. (8) Evaluate the tangential and normal components of this relative velocity vector. (9) On one graph, plot the magnitude of the relative velocity vector and that of the slider. Use ¯ a = La /d = 0.8. Use non-dimensional time τ = Ωt and notation (·) the following data: L indicates a derivative with respect to τ . Present all the results for τ ∈ [0, 2π].
Problem 5.29. Disk-follower mechanism Figure 5.26 depicts a disk-follower mechanism. The disk of radius R rotates at a constant anguP C lar velocity, θ˙ = Ω, about point C. A pin is lo+ h B p cated at the rim of the disk. The slotted follower q b1 is hinged at point O and f the pin slides inside O the slot. Frame F F = O, B+ = (¯b1 , ¯b2 , ¯b3 ) C R i1 is attached to the follower and the distance from d point O to C is denoted d. The shape of the slot is deſned by curve C and the position vector of Fig. 5.26. The disk-follower mechanism. a point on this curve with respect to point O, resolved in basis B+ , is denoted p+ = (x0 +x1 η+x2 η 2 +x3 η 3 )¯b1 +(y0 +y1 η+y2 η 2 +y3 η 3 )¯b2 , where η is an arbitrary parameterization of the curve. (1) Plot the shape of curve C. (2) Plot angle φ versus τ . (3) Plot parameter η. (4) Plot angular velocity φ . (5) Plot η . (6) Plot angular acceleration φ . (7) Plot η . (8) Show that eq. (5.30) holds for your solution. (8) Plot the magnitude of the relative velocity vector. Use non-dimensional time τ = Ωt; notation (·) denotes a derivative with respect to τ . Use the following data: R = 1.2, d = 1.8, x0 = 0, x1 = 1, x2 = 0, x3 = 0.5, y0 = y1 = 0, y2 = −1.4, and y3 = 1 m.
b2
a1
i2
Problem 5.30. Geneva wheel mechanism Figure 5.27 depicts the Geneva wheel mechanism, which consists of a disk and slotted arm. The disk of radius R rotates about inertial point O at a constant angular velocity, θ˙ = Ω. A pin is located at the rim of the disk at point P. The slotted arm is hinged at point A and the pin slides inside the slot. The distance from point A to the pin is denoted w. (1) On one graph, plot angle φ versus θ for one revolution of the disk. (2) Plot distance w ¯ = w/R. (3) Plot angular velocity φ . (4) Plot w ¯ . (5) Plot angular acceleration φ . (6) Plot w ¯ . (7) Show that eq. (5.30) holds for your solution. Use non-dimensional time τ = Ωt; notation (·) denotes a derivative ¯ = L/R = 1.5. with respect to τ . Use the following data: L
A f
w P
q
i2 L
e2
r
e1 P
q
A
i1
O
O
d R
Fig. 5.27. Geneva wheel mechanism.
Fig. 5.28. Scotch yoke mechanism.
5.5 The motion tensor
187
Problem 5.31. Scotch yoke mechanism Figure 5.28 depicts the Scotch yoke mechanism, which consists of a disk and slotted yoke. The disk rotates about inertial point O at a constant angular velocity, θ˙ = Ω. A pin is located at a distance r from the center of the disk. The slotted yoke is allowed to move horizontally and the pin slides inside the slot. (1) Find the position of point A as a function of angle θ. (2) Find the velocity of point A. (3) Find the acceleration of point A. (4) Show that eq. (5.30) holds for your solution.
5.5 The motion tensor In this section, the motion tensor is introduced as the tensor that relates the Pl¨ucker coordinates of a line of a rigid body in its initial and ſnal conſgurations. 5.5.1 Transformation of a line of a rigid body Figure 5.29 shows a rigid body in its referFinal Configuration b3 ence conſguration deſned by frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )]. Two points of this rigid SQ b2 Q body, denoted points P and Q, are deſned by B* their position vectors with respect to point O b1 A given as sP and sQ , respectively. In the ſS i3 P P nal conſguration, the body is associated rigid P with frame F = A, B ∗ = (¯b1 , ¯b2 , ¯b3 ) . SusP u, R perscripts (·)∗ indicate tensor components reI ∗ solved in basis B . The position vectors of maQ i2 sQ O terial points P and Q with respect to point A are now S P and S Q , respectively. Because points Reference i1 configuration P and Q are material points of the rigid body, S P = R S ∗P and S Q = R S ∗Q . Fig. 5.29. A line of a rigid body in the Consider now the line passing through these reference and ſnal conſgurations. two points in the ſnal conſguration. Its orienta∗ ∗ ∗ ∗ ∗ tion, resolved in basis B , is ¯ = (S Q −S P )/(S Q −S ∗P ). The Pl¨ucker coordinates of this line, eq. (1.38), evaluated with respect to point A, are ∗ k SP∗ ¯∗ = ¯∗ . (5.33) Q∗ = ¯∗ The Pl¨ucker coordinates of the same line with respect to point O will now be evaluated and resolved in basis I. First, the orientation of the line is now ¯ =
(u + S Q ) − (u + S P ) SQ − SP S ∗Q − S ∗P = =R ∗ = R ¯∗ . (u + S Q ) − (u + S P ) S Q − S P S Q − S ∗P
Next, the Pl¨ucker coordinates of the same line become
188
5 Kinematics of rigid bodies
Q=
R SP∗ ¯∗ Ru u R¯∗ + RSP∗ RT R ¯∗ ( u + SP )¯ = = . 0 R ¯ R ¯∗ ¯∗
(5.34)
The motion tensor is deſned as C=
R Ru , 0 R
and eq. (5.34) can now be written in a compact form as ∗ k k Q = ¯ = C Q∗ = C ¯∗ .
(5.35)
(5.36)
Clearly, the motion tensor relates the Pl¨ucker coordinates of an arbitrary line of the rigid body resolved in two frames. This change of frame operation is more complex than the change in basis operation discussed in section 4.8: it involve both a change of basis and a change of reference point [1, 23, 22]. Equation (5.36) can be written in a more explicit manner as Q[F
I
]
I
= C [F ] Q[F ] .
In this form, the present change of frame operation mirrors the change of basis operation expressed by eq. (4.27). 5.5.2 Properties of the motion tensor The motion tensor can be factorized in the following manner R 0 Iu C= = T R, 0I 0 R
(5.37)
where R is the rotation tensor and T the translation tensor. The eigenvalues of the motion tensor are now easily computed. Indeed, det(C) = det(T ) det(R) = det(T ) det2 (R) and because det(T ) = 1, det(C) = det2 (R). Hence, the eigenvalues of the motion tensor are identical to those of the rotation tensor, but each with a multiplicity of two. The motion tensor, however, unlike the rotation tensor, is not an orthogonal tensor. Two linearly independent eigenvectors of the motion tensor associated with its unit eigenvalues are found to be ⎫ ⎧ T ⎨ G u ⎬ n ¯ N †1 = , and N †2 = 2 sin φ/2 . (5.38) 0 ⎭ ⎩ n ¯ The fact that N †1 is an eigenvector of the motion tensor stems from the corre¯ = n ¯ . It is readily veriſed that N †2 sponding property for the rotation tensor, R n
5.5 The motion tensor
189
is also an eigenvector of the motion tensor, indeed, R GT u/(2 sin φ/2) + u R n ¯ = (G − 2 n sin φ/2)u/(2 sin φ/2) = GT u/(2 sin φ/2). Any linear combination of eigenvectors N †1 and N †2 is still an eigenvector of the motion tensor. Consequently, the family of eigenvectors associated with the unit eigenvalue is expressed as follows (α − 1)d † m N = = N + N †2 , (5.39) n ¯ 2 sin φ/2 1 where α is an arbitrary scalar and d the intrinsic displacement of the rigid body. The displacement related part of the eigenvector is m=
GT u (α − 1)d + n ¯. 2 sin φ/2 2 sin φ/2
(5.40)
The scalar product of the two vectors forming the eigenvector is closely related to the intrinsic displacement of the rigid body λ=n ¯T m =
αd . 2 sin φ/2
(5.41)
5.5.3 Mozzi-Chasles’ axis In general, an arbitrary line of a rigid body is different in the reference and ſnal conſgurations. The following question can then be asked: is it possible to ſnd a line of the rigid body that is identical in the reference and ſnal conſgurations? If such line exists, its Pl¨ucker coordinates in the reference and ſnal conſgurations are identical, i.e., Q = Q∗ , or, using eq. (5.36), Q = C Q. This implies that the Pl¨ucker coordinates of this line must form an eigenvector of the motion tensor, as given by eq. (5.39). Because the ſrst three components of the Pl¨ucker coordinates of a line must be orthogonal to the last three, eq. (5.41) implies λ = α = 0, and hence, ⎫ ⎧ T n ⎬ ⎨ G n d u . QMC = N †2 − (5.42) N† = − 2 sin φ/2 1 ⎩ 2 sin φ/2 ⎭ n ¯ In summary, the Pl¨ucker coordinates of the line of the rigid body that is identical in the reference and ſnal conſgurations are given by eq. (5.42). These coordinates are those of Mozzi-Chasles’ axis, see eq. (5.9). Hence, Mozzi-Chasles’ axis is the line of the rigid body that is identical in the reference and ſnal conſgurations. This can be written as QMC = C QMC : Mozzi-Chasles’ axis is an eigenvector of the motion tensor corresponding to a unit eigenvalue.
190
5 Kinematics of rigid bodies
5.5.4 Intrinsic expression of the motion tensor The motion tensor was deſned by eq. (5.35), which is not an intrinsic expression because the displacement vector of the reference point of the rigid body, u, explicitly appears in this deſnition. In this section, an intrinsic expression of the motion tensor is sought, i.e., an expression in which vector u does not appear explicitly. Rodrigues’ rotation formula, eq. (4.15), provides an intrinsic equation for the rotation tensor in terms of n ¯ , the eigenvector of the rotation tensor associated with its unit eigenvalue, and φ, the magnitude of the rotation. A similar approach is followed here for the motion tensor, which should be expressed in terms of N , the eigenvector of the motion tensor associated with its unit eigenvalue, φ, the magnitude of the rotation, and d, the intrinsic displacement of the rigid body. The motion tensor, eq. (5.35), is composed of two sub-matrices: the rotation tensor, repeated twice along the diagonal, and tensor u R, appearing as an off-diagonal term. The intrinsic expression of the rotation tensor is provided by Rodrigues’ rotation formula, eq. (4.15). In contrast, the term u R is not intrinsic because the displacement vector of the reference point, u, appear explicitly. Using the deſnition of the intrinsic displacement of the rigid body, eq. (5.7), the displacement vector is related of the motion tensor, with the to the eigenvector help of eq. (5.40) to ſnd m = GT u + (α − 1)¯ nn ¯ T u /(2 sin φ/2). Introducing the expression for the half-angle rotation tensor, eq. (4.20), then yields m = E u, where second-order tensor E is deſned as α 1 α 1 I− n + − n n . E= 2 sin φ/2 2 2 sin φ/2 2 tan φ/2
(5.43)
(5.44)
It now becomes possible to express the displacement vector in terms of the ſrst part of the eigenvector of the motion tensor as u = J m,
(5.45)
where tensor J = E −1 is easily found as J=
2 sin φ/2 n+ I + (1 − cos φ) α
2 sin φ/2 − sin φ n n . α
(5.46)
Equation (5.45) now yields an explicit expression of the displacement of the body’s reference point φ m = sin φ m + d(1 − α cos ) u = J n + (1 − cos φ)( nm − m n). 2
(5.47)
Finally, tedious algebra reveals the following result, m R = sin φ m + dc1 n + (1 − cos φ) ( nm + m n) + dc2 n n , u R = J
(5.48)
5.5 The motion tensor
191
where coefſcients c1 and c2 are deſned as c1 = cos φ − α cos φ/2, c2 = sin φ − 2α sin φ/2.
(5.49a) (5.49b)
Combining Rodrigues’ rotation formula, eq. (4.15), and eq. (5.48), the motion tensor, eq. (5.35), becomes dc2 I sin φ I dc1 I (1 − cos φ) I n m n m n m C=I+ + . 0 n 0 sin φ I 0 n 0 (1 − cos φ) I 0 n (5.50) To simplify the writing of this seemingly complicated expression, the following notation is introduced. First, tensor Z, a function of two scalars, α and β, is introduced βI αI Z(α, β) = . (5.51) 0 βI Second, the generalized vector product tensor is deſned m = n . N 0 n
(5.52)
does not indicate a 6 × 6 skew-symmetric tensor, but rather the above Notation N 6 × 6 tensor formed by three skew-symmetric sub-tensors. Introducing these various notations into eq. (5.50) yields the desired intrinsic expression of the motion tensor and of its inverse + Z(dc2 , 1 − cos φ)N N , C(N ) = I + Z(dc1 , sin φ)N
(5.53a)
+ Z(dc2 , 1 − cos φ)N N . C −1 (N ) = I − Z(dc1 , sin φ)N
(5.53b)
The parallel between this intrinsic expression for the motion tensor and that for the rotation tensor given by Rodrigues’ rotation formula, eq. (4.15), is striking. Clearly, the skew-symmetric tensor, n , appearing in the expression for the rotation tensor , appearing in that for the is replaced by the generalized vector product tensor, N motion tensor. The two scalars, sin φ and (1 − cos φ), appearing in the expression for the rotation tensor becomes the second arguments of tensor Z appearing in that for the motion tensor. Rodrigues’ rotation formula, eq. (4.15), provides an intrinsic expression for the rotation tensor and is a direct consequence of Euler’s theorem on rotations, theorem 4.1. Similarly, the intrinsic expression for the motion tensor is a direct consequence of the Mozzi-Chasles theorem 5.1. The parallel between the rotation and motion tensors will be further explored in section 5.6.3. 5.5.5 Properties of the generalized vector product tensor The generalized vector product tensor deſned by eq. (5.52) enjoys remarkable properties that generalize those of the skew-symmetric tensor. First, the skew-symmetric
192
5 Kinematics of rigid bodies
operator, n , possesses a null eigenvalue, n n ¯ = 0¯ n. Similarly, the generalized vector N = 0N . product tensor also possesses a null eigenvalue, N The second property of the generalized vector product tensor generalizes the behavior of the skew-symmetric tensor under a change of basis operation, eq. (4.30). Consider the following triple matrix product T2 2 R2 RT2 RT2 u n 3 m n 1 m 3 1 R2 u = . T 0 n 3 0 n 0 R2 0 R2 1 This equality implies two conditions. The ſrst condition is n 3 = RT2 n 1 R2 , which, T in view of eq. (4.30), implies n ¯ 3 = R2 n ¯ 1 . The second condition is m 3 = RT2 (m 1 + T n 1 u 2 − u 2 n 1 )R2 , and tensor identities then lead to m3 = R2 (m1 + n 1 u2 ). These results can be summarized by the following equivalence, 3 = C −1 (N )N 1 C(N ) ⇐⇒ N = C −1 (N )N . N 2 2 3 2 1
(5.54)
The third property of the generalized vector product tensor generalizes identity (1.34b), which holds for unit vectors and is rewritten here as n n n +n = 0. N N + Z(2λ, 1)N = 0. N
(5.55)
The use of identities (1.34b) and (1.36) yields the above result, where λ = n ¯ T m. 5.5.6 Change of frame operation for linear and angular velocities Let the reference conſguration of the rigid body shown in ſg. 5.29 be the conſguration of the body at time t = 0, and its ſnal conſguration is time-dependent. Consider now two vectors associated with the rigid body: the velocity vector of point A, denoted v A , a bound vector, see section 1.2, and the angular velocity vector of the body, denoted ωA , a free vector, see section 1.1. The components of these two vectors resolved in basis B ∗ are denoted v ∗A and ∗ ω A , respectively, where the subscript on the latter symbol is, of course, superƀuous because the angular velocity is identical for all points of the body. The following velocity vector is now deſned ∗ vA V∗ = . (5.56) ω ∗A Strictly speaking, quantity V ∗ should not be called a vector: it is, in fact, an array composed of two individual vectors, the linear and angular velocity vectors. The rules of transformation of ſrst-order tensors, eq. (4.27), apply to these two vectors, but not to quantity V ∗ . It is convenient, however, to call quantity V ∗ a vector to underline the tensorial nature of the two vectors it is composed of. Symbols in calligraphic type, such as V ∗ , are used to denote quantities composed of two vectors. For simplicity, these quantities will be referred to as vectors in the following.
5.5 The motion tensor
193
In the previous section, the motion tensor was shown to transform the Pl¨ucker coordinates of a line from one frame to the other, and hence, it is interesting to consider the following transformation vO V= = C V ∗. (5.57) ωO To understand the physical meaning of this transformation, the physical interpretation of the velocity vectors v O and ωO must be identiſed ſrst. It is clear that v A = R v ∗A and ω A = R ω ∗A are the components of vectors v A and ω A , respectively, resolved in basis I. This corresponds to a change of basis operation, which establishes the relationship between the components of vectors in two bases. Next, because v O = R v ∗A + u R ω ∗A = v A − ω A u, velocity vector v O is that of the point of the rigid body which instantaneously coincides with the origin of the reference frame, point O. Of course, ωO can also be interpreted as the angular velocity vector of the same point, because the angular velocity vector is the same for all points of a rigid body. Hence, this second operation corresponds to a change of reference point operation, which establishes the relationship between the velocities of two different points of the rigid body. In summary, the operation described by eq. (5.57) corresponds to a change of frame operation, which combines a change of basis operation and a change of reference point operation. The factorized form of the motion tensor, eq. (5.37), clearly underlines the double effect of a frame change. It consists of two operations: ſrst a change of basis operation characterized by the rotation operator, R, then a change of reference point operation characterized by the translation operator, T . This change of frame operation can be inverted to yield V ∗ = C −1 V, where the inverse of the motion tensor is T T T T T Iu R R u R 0 C −1 = R−1 T −1 = RT T −1 = = . T T 0 I 0 R 0 R
(5.58)
(5.59)
An an intrinsic expression for this inverse is given by eq. (5.53b). 5.5.7 Change of frame operation for forces and moments A similar study can be made concerning two other vectors associated with the rigid body: the force vector acting on the rigid body, F A , and the moment acting on the rigid body, M A , evaluated with respect to point A. The components of these two vectors resolved in basis B ∗ are denoted F ∗A and ∗ M A , respectively, where the subscript on the former symbol is, of course, superƀuous because the force vector can be applied at any point of the rigid body. The following applied load vector is deſned ∗ FA A∗ = . (5.60) M ∗A
194
5 Kinematics of rigid bodies
Consider now the effect of the following transformation R 0 FO = C −T A∗ = A∗ . A= MO u R R
(5.61)
Here again, it is clear that F A = R F ∗A and M A = R M ∗A are the components of the force and moment vectors, respectively, resolved in the inertial basis. This corresponds to a change of basis operation, which establishes the relationship between the components of vectors in two orthonormal bases. Next, because M O = R M ∗A + u R F ∗A = M A + u F A , moment vector M O is the applied moment computed with respect to the point of the rigid body that instantaneously coincides with point O. Of course, F O can also be interpreted as the force applied on the rigid body at the same point, because this force is the same at all points of the rigid body. In summary, the operation described by eq. (5.61) is a change of frame operation that combines a change of basis and a change of reference point. This change of frame operation can be inverted to yield A∗ = C T A.
(5.62)
The components of velocity quantities and applied loads quantities transform differently under a frame change operation, as indicated in eqs. (5.57) and (5.61), respectively. Both transformations, however, are based on the motion tensor which appears to be a fundamental quantity associated with frame changes.
5.6 Derivatives of ſnite motion operations The derivatives of ſnite rotation operations were discussed in section 4.10 and led to the concept of angular velocity vector. The present section focuses on the study of time derivatives of the motion tensor, which leads to both velocity and angular velocity vectors. Differential changes in motion are also investigated. 5.6.1 The velocity vector The time-dependent motion of a rigid body is represented by the time-dependent motion of the body attached frame, F = A, B ∗ = (¯b1 , ¯b3 , ¯b3 ) , depicted in ſg. 5.29. Let C be the motion tensor that brings reference frame F I to frame F , and eq. (5.36) then implies Q(t) = C(t)Q∗ . Taking a time derivative of this equation leads to ˙ = C˙ Q∗ , and eliminating Q∗ then yields Q ˙ = C˙ C −1 Q. Q
(5.63)
Comparing this equation with eq. (4.56) reveals that expression C˙ C −1 , associated ˙ RT , associated with the rotation with the motion tensor, generalizes expression R tensor. The use of identity (1.33a) leads to
5.6 Derivatives of ſnite motion operations
C˙ C −1
˙ ˙ u T RT RT u ˙ R + u R ω v R + u ω) ω ( u ˙ = = = . ˙ 0ω 0 RT 0 R 0 ω
195
(5.64)
This expression gives rise to two quantities. First, the angular velocity of the rigid ˙ RT ); as body emerges from the time derivative of the rotation tensor, ω = axial(R expected, this quantity is identical to that which arose for the study of time derivatives of time-dependent rotations, see section 4.10. Second, the velocity vector of the rigid body, v = u˙ + u ω, also emerges from the time derivative of the motion tensor. This quantity can be interpreted as the linear velocity of the point of the rigid body that instantaneously coincides with the origin of the reference frame, point O, see section 5.5.6. The velocity vector of the rigid body resolved in frame F I is now deſned as v , (5.65) V= ω ˙ = VQ, where the generalized vector product tensor is and eq. (5.63) becomes Q given by eq. (5.52). It is also possible to resolve the components of the velocity vector in the moving frame, ˙ = C −1 C˙ Q∗ . C −1 Q (5.66) ˙ associated Comparing this equation with eq. (4.55) reveals that expression C −1 C, ˙ associated with the rotation with the motion tensor, generalizes expression RT R, tensor. It is readily found that T T T ˙ ˙ T ˙ u ∗ R R u R + u R R ω ∗ v∗ u ˙ R ω −1 ˙ C C= = . (5.67) = T ˙ 0 ω ∗ 0 R 0 R 0 ω This expression gives rise to two quantities. First, the components of the angular ˙ Second, velocity of the rigid body resolved in the rotating basis, ω ∗ = axial(RT R). the components of the velocity vector of the reference point of rigid body resolved in the rotating basis, v ∗ = RT u. ˙ The components of the velocity vector of the rigid body resolved in the material frame are now deſned as ∗ v ∗ V = = C −1 V, (5.68) ω∗ where the second equality follows from eq. (5.58). Equation (5.66) now becomes ∗ Q∗ , where the generalized vector product operator is given by eq. (5.52). ˙ =V C −1 Q The above developments are summarized in the following relationships C˙ C −1 = V, ∗, C −1 C˙ = V It is readily shown that
C C˙ C˙
−1
−1
= −V,
(5.69a)
∗. C = −V
(5.69b)
196
5 Kinematics of rigid bodies
∗ = C −1 VC, V
(5.70a)
∗ C −1 , =CV V
(5.70b)
as can be expected from the transformation formulae for the velocity vectors, eqs. (5.57) and (5.58). 5.6.2 The differential motion vector The concept of differential rotation vector was introduced in section 4.12.4 based on the rotation tensor, eq. (4.101). By analogy, the following expression is formed T T T du (du R+u dψ dψ dR R R u +u dψ) dR du −1 dC C = = = . 0 RT 0 dR 0 dψ 0 dψ This expression gives rise to two quantities. First, the differential rotation vector of the rigid body emerges from differential changes of the rotation tensor, dψ = axial(dR RT ); this quantity is identical to that deſned by eq. (4.101). As discussed in section 4.12.4, no vector ψ exists such that d(ψ) gives the differential rotation vector. Second, the differential displacement vector of the rigid body, du = du + u dψ, also emerges from the differential of the motion tensor. du is the differential displacement of point A and du = du + u dψ the differential displacement of the material point of the rigid body that instantaneously coincides with point O. Of course, there exist no displacement vector, say x, such d(x) = du + u dψ. Notations du and dψ will be used to denote the differential displacement and rotation vectors, respectively. By analogy to eqs. (5.69a) and (5.69b), the following compact notation is adopted , dC C −1 = dU
CdC −1 = −dU,
∗
∗
, C −1 dC = dU
, dC −1 C = −dU
where the components of the differential motion vector are deſned as du = C dU ∗ , dU = dψ ∗ du = C −1 dU, dU ∗ = dψ ∗
(5.71a) (5.71b)
(5.72a) (5.72b)
in the ſxed and moving frames, respectively. The components of the differential rotation and displacement vectors, both resolved in the moving frame, are dψ ∗ = axial(RT dR) and du∗ = RT du, respectively. It is readily shown that ∗
C, = C −1 dU dU ∗ −1
= C dU C dU
(5.73a) .
(5.73b)
5.6 Derivatives of ſnite motion operations
197
Taking a differential of eq. (5.69a) and a time derivative of eq. (5.71a) leads to −1 ˙ ˙ −1 and dU = dC˙ C −1 + dC C˙ , respectively. Subtracting these dV = dC˙ C −1 + CdC two equations and using eqs. (5.69a) and (5.71a) then yields ˙ + dU V. − dU dU dV = −V Expanding these expressions and using identity (1.33a) then leads to this important ˙ − VdU , which relates differentials in the velocity vector to the difresult dV = dU ferential motion vector and its time derivative. This equation generalizes eq. (4.102a) written for the sole angular velocity. The following results are obtained in a similar manner ˙ ∗, dV = C dU
˙ − VdU, dV = dU ∗
∗
∗
∗
˙ + V dU , dV = dU
∗
dV = C
−1
˙ dU.
(5.74a) (5.74b)
5.6.3 Change of frame operations Section 4.8.1 discussed change of basis operations. By deſnition 4.1, a vector, or ſrst-order tensor, is a mathematical entity whose components resolved in two bases are related by eqs. (4.27). This deſnition applies equally to kinematic quantities such as displacement and rotation vectors, and load quantities such as force or moment vectors. For instance, the components of the velocity vector resolved in inertial and material bases, denoted v and v ∗ , respectively, are such that v = R v ∗ , if R are the components of the rotation tensor that brings the inertial to the material basis, resolved in the inertial basis. The components of the angular velocity vector resolved in the same bases are such that ω = R ω ∗ . Similar relationships hold for the components of the force and moment vectors. In fact, according to deſnition 4.1, the components of all vectors follow the same transformation rule under a change of basis. Section 5.5.6 presented the change of frame operation for the linear and angular velocity vectors. For instance, eq. (5.57) provides the relationship between the components of the linear and angular velocity vectors resolved in the inertial and material frames, denoted V and V ∗ , respectively, as V = C V ∗ , if C are the components of the motion tensor that brings the inertial frame to the material frame, resolved in the inertial frame. The change of frame transformation operates on the linear
and angular velocity vectors simultaneously. The notational convention, V T = v T , ω T and the use of a 6 × 6 motion tensor enable the simultaneous manipulation of the two vectors. On the other hand, section 5.5.7 introduced the change of frame operation for forces and moments. For instance, eq. (5.61) provides the relationship between the components of the force and moment vectors resolved in the inertial and material frames, denoted A and A∗ , respectively, as A = C −T A∗ . The change of frame operation for kinematic quantities is based on the motion tensor, C, but the same change of frame operation for loads uses the transpose of its inverse, C −T .
198
5 Kinematics of rigid bodies
Energetically conjugate quantities To understand the crucial difference between change of basis and change of frame operations, consider the differential work done by the force and moment vectors, denoted F and M , respectively, applied at point A of the rigid body, dW = F T du + M T dψ,
(5.75)
where du and dψ are the differential displacement vector of the point of application of the force and the differential rotation of the rigid body, respectively, see ſg. 5.29. The force and differential displacement vectors are said to be energetically conjugate quantities because their scalar product yields the differential work. Similarly, the moment and differential rotation vectors are also energetically conjugate quantities. Because the scalar product is a tensor operation, the differential work can also be expressed as dW = F ∗T du∗ + M ∗T dψ ∗ , where F ∗ = RT F and M ∗ = RT M are the components of the force and moment vectors, resolved in the body attached basis, and du∗ = RT du and dψ ∗ = RT dψ the components of the differential displacement and rotation vectors resolved in the same basis. Energetically conjugate quantities, such as the moment and differential rotation vectors, follow the same rules of transformation under a change of basis. The following compact notation is introduced dW = F ∗T du∗ + M ∗T dψ ∗ = A∗T dU ∗ ,
(5.76)
where A∗T = F ∗T , M ∗T is the applied loading vector and dU ∗ the differential motion vector deſned by eq. (5.72b). These two quantities, A∗ and dU ∗ , are energetically conjugate because their scalar product yields the differential work. To explore the effect of a change of frame, the following transformation is performed, dW = A∗T dU ∗ = A∗T C −1 C dU ∗ = AT dU, (5.77) where A = C −T A∗ , as expected from eq. (5.61), and dU = C dU ∗ , as expected from eq. (5.72a). Under a change of frame, the rules of transformations for energetically conjugate quantities differ. This difference stems from the fact that the motion tensor is not an orthogonal tensor, C −1 = C T . In contrast, the rotation tensor is orthogonal, R−1 = RT and consequently, the rules of transformations for energetically conjugate quantities are identical for change of basis operations. Generalization of the concept of tensor analysis Section 4.8.4 introduced the concept of tensor analysis. The combined use of tensor quantities and tensor operations leads to a formulation of the laws of physics that guarantees their invariance with respect to change of basis operations. Intuitively, the laws of physics should be invariant under a change of basis operation because this operation simply corresponds to the selection of a different basis in which all
5.6 Derivatives of ſnite motion operations
199
tensor components are resolved, but does not change the physical behavior of the system. Intuitively, the laws of physics should also be invariant with respect to a change in the location of the origin of the coordinate system, as long as this new origin is still an inertial point. Combining these two intuitive observations, the invariance of the laws of physics with respect to both basis and origin selection, leads to the natural conclusion that the laws of physics must be invariant with respect to a change of frame. The generalization of the concept of tensor analysis to the invariance of the laws of physics to change of frame operations involves two parts, the use of generalized tensors quantities and of generalized tensor operations. These two concepts generalize the use of tensor quantities and tensor operations characteristics of tensor analysis, see sections 4.8.3 and 4.8.4. When dealing with change of frame operation, linear and angular quantities becomes coupled. For instance, linear and angular velocity vectors are paired to form the generalized velocity vector deſned by eq. (5.56), similarly, the force and moment vectors are paired to form the generalized loading vector deſned by eq. (5.60). The generalized velocity vector is composed of two vectors, or ſrst-order tensors Consider now the change of frame operation expressed by eq. (5.57) and repeated here in more explicit details v O = R v ∗A + u R ω∗A R ∗ Ru ⇐⇒ V V = C V ∗. = (5.78) ωO = R ω ∗A 0 R The two equations on the left-hand side are basis invariant because they only involve tensor quantities and tensor operations; they satisfy all the rules of tensor analysis. Taken together, they express a change of frame operation, which is repeated on the right-hand side with a more compact notation. The generalized motion tensor, C, of size 6 × 6, is composed of four sub-matrices, each of size 3 × 3, which are each second-order tensors. Clearly, the right-hand side of eq. (5.78) generalizes the change of basis operation, v = R v ∗ , to the change of frame operation, V = C V ∗ . In the following developments, quantities such as V or V ∗ will be called vectors or ſrst-order tensors, and quantities such as the motion tensor will be called second-order tensors. This terminology is more convenient to use in place of the more awkward “generalized velocity vector” and “generalized motion tensor.” Because generalized vectors and tensors are indicated in calligraphic type, their generalized nature is clearly implied. Example 5.5. First- and second-order tensors In the previous sections, ſrst- and second-order tensors have already been encountered. The second property of the generalized vector product operator given by eq. (5.54) is repeated here for convenience 3 = C −1 (N )N 1 C(N ) ⇐⇒ N = C −1 (N )N . N 2 2 3 2 1 The right-hand side of this equivalence expresses the rules of transformation for the ſrst-order tensor, N : its components in frames F1 and F3 are N 1 and N 3 , respec-
200
5 Kinematics of rigid bodies
tively, and C(N 2 ) are the components of the motion tensor that brings frame F1 to F3 , resolved in frame F1 . The left-hand side of this equivalence expresses the rules of transformation for : its components in frames F1 and F3 are N 1 and N 3 , the second-order tensor, N respectively. This gives a formal proof that the generalized vector product operator deſned by eq. (5.52) is in fact a second-order tensor. Clearly, these results generalize the corresponding results obtained for the skew-symmetric tensor in eq. (4.30). Example 5.6. The motion tensor The motion tensor was introduced in section 5.5.1 and was called a “tensor.” Prove that the motion tensor is indeed a second-order tensor. Consider the intrinsic expression of the motion tensor given by eq. (5.53a) as + Z(dc2 , 1 − cos φ)N N . The arguments of operator S(N ) = I + Z(dc1 , sin φ)N Z are functions of two variables, rotation angle φ and the intrinsic displacement of the rigid body, d. Both quantities are zeroth-order tensor because they are unaffected by a change of frame operation. Next, it is easily veriſed that operator Z(α, β), where α and β are zeroth-order tensors, is itself a zeroth-order tensor. Indeed, Z(α, β) = C −1 (N 2 )Z(α, β)C(N 2 ),
(5.79)
which implies the invariance of Z(α, β) under a change of frame operation, −1 −1 −1 S(N )C 2 = I + Z(dc1 , sin φ) C N + Z(dc2 , 1 − cos φ) C N C N C −1 2 2 2 2
= S(C −1 N ), 2
where the tensorial nature of the generalized vector product tensor, eq. (5.54), was taken into account. The tensorial nature of the motion tensor is now established. A more formal expression of the tensorial nature of the motion tensor is C(N 3 ) = C −1 (N 2 )C(N 1 )C(N 2 ) ⇐⇒ N 3 = C −1 (N 2 )N 1 .
(5.80)
This result for the motion tensor should be compared with the corresponding result for the rotation tensor, eq. (4.31).
6 Kinetics of rigid bodies
In section 3.4, the dynamic response of a system of particles subjected to both internally and externally applied loads is studied and leads to Euler’s ſrst and second laws [14, 15]. Rigid bodies can be viewed as systems of particles subjected to both internal and external forces. The former forces are those that maintain the shape of the rigid body. By deſnition, a rigid body is one for which the distance between any two of its particles remains constant at all times. The displacement ſeld of the rigid body must satisfy the kinematic constraints developed in section 5.1 and its velocity ſeld those described in section 5.2. The conſguration of the rigid body is deſned by six parameters: the three coordinates describing the location of one of its points and three parameters describing its orientation. Similarly, the velocity ſeld of the rigid body is determined by six parameters: the three components of the linear velocity vector of one of its points and the three components of its angular velocity vector. Clearly, all the results derived in section 3.4 concerning the Newtonian mechanics of systems of particles are readily applicable to rigid bodies. In particular, the motion of the center of mass of the rigid body is governed by the following equation: F = P˙ , where P = mv C is the linear momentum of the body, m its total mass, v C the velocity of its center of mass, and F the sum of all externally applied forces. An˙ , where H other vector equation that applies to systems of particles is M C = H C C is the angular momentum vector of the rigid body and M C the sum of the externally applied moments, both computed with respect to the center of mass of the rigid body. ˙ , i.e., both angular momentum and externally applied It is also true that M O = H O moments can be evaluated with respect to an inertial point O. These two differential vector equations in time provide the six scalar equations necessary to solve for the motion of the rigid body. The ſrst equation is very similar to Newton’s second law for a single particle, eq. (3.4). The mass of the entire rigid body multiplied by the acceleration of its center of mass equals the sum of all externally applied forces. The rigid body can be replaced by a ſctitious particle of mass m located at its center of mass and subjected to all the forces externally applied to the body.
O. A. Bauchau, Flexible Multibody Dynamics, DOI 10.1007/978-94-007-0335-3_6 © Springer Science+Business Media B.V. 2011
202
6 Kinetics of rigid bodies
The second equation describes the motion of the rigid body around its center of mass. This equation is more complex than the ſrst and does require the evaluation of the angular momentum vector of the rigid body, which will bring to light an additional inertial characteristics of the rigid body, the mass moment of inertia tensor. The evaluations of the angular velocity vector and of the kinetic energy of a rigid body are presented in sections 6.1 and 6.2, respectively. The evaluation of these quantities gives rise to the tensor of mass moments of inertia whose properties are reviewed in section 6.3. The equations of motion of a rigid body are derived in section 6.5 and the principle of work and energy in section 6.6. A special case of particular interest for many applications is the planar motion of rigid bodies, which is the focus of section 6.7.
6.1 The angular momentum vector The angular momentum vector of a system of particles, )Ncomputed with respect to an arbitrary point O, is deſned in section 3.4 as H O = i=1 ri mi v i , where mi is the mass of a particle of the system, v i its inertial velocity vector, r i its position vector with respect to point O, and N the total number of particles of the system. When dealing with a rigid body, this deſnition is not easy to handle: the number of particles is very large while the mass of each one is very small. Each atom the rigid body could be considered to be a particle of very small mass and the total number of particles would be extremely large. Consequently, the familiar concepts of continuum mechanics are introduced: each differential volume element of the body, dV, is considered to be a particle of mass mi = ρdV, where ρ is the mass density of the body. The sum over all particles is then replaced by an integral over the entire volume of the body. Figure 6.1 show the conſguration of the b3 rigid body; frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )] is v b2 an inertial frame. Point B is a reference point B of the body while point Q is a material point s B i3 of the body. The position vector of point Q with Q respect to point B is denoted s. The angular mob1 mentum vector of the body, computed with reO i2 spect to point B, is then i1 I % H = sv Q ρdV, Fig. 6.1. Conſguration of a rigid B V
body.
where v Q is the inertial velocity of point Q, and V the total volume of the body. Because the body is rigid, its velocity ſeld is described by eq. (5.10), i.e., v Q = vB + ω s and the angular momentum vector now becomes % s(v B + ω s) ρdV. HB = V
6.1 The angular momentum vector
203
Because v B is the velocity of reference point B and ω the angular velocity of the rigid body, this expression can be recast as % % HB = s ρdV v B + s sT ρdV ω. V
V
The ſrst bracketed term ' is related to the location of the center of mass of the rigid body, see eq. (3.56); V s ρdV = mr BC , where r BC is the position vector of the rigid body center of mass with respect to point B. The second bracketed term is the tensor of mass moments of inertia, evaluated with respect to point B. This second-order, symmetric tensor is deſned as % B I = ssT ρdV, (6.1) V
With these deſnitions, the angular momentum vector takes the following form rBC v B + I B ω. H B = m
(6.2)
The sole inertial characteristic of a particle is its mass, but the characterization of the inertial properties of a rigid body is more complex. Ten quantities are required: the total mass of the body, m (a single scalar quantity), the location of the center of mass, r BC (three components of this vector), and the mass moments of inertia tensor, I B (six independent components of this symmetric tensor). The units of the mass moments of inertia tensor are kg·m2 . An arbitrary orientation of the inertial basis, I, was selected. A different basis, say I , could have been selected. Let R be the components of the rotation tensor that brings basis I to basis I , resolved in basis I. If s and s denote the components of vector s in bases I and I , respectively, eq. (4.27) implies s = RT s. It then follows that % % (I B ) = s sT ρdV = RT sR RT sT R ρdV V V % (6.3) T T B T =R s s ρdV R = R I R. V
This expression relates the components of tensor of mass moments of inertia resolved in two bases, I and I , denoted I B and (I B ) , respectively. The fact that these components are related by the transformation rules for the components of second-order tensors, eq. (4.29), proves the tensorial nature of the mass moments of inertia tensor deſned in eq. (6.1). Often, it will be convenient to compute the angular momentum vector with respect to the center of mass of the rigid body. Indeed, selecting the center of mass as the reference point of the body implies r CC = 0, and eq. (6.2) reduces to H C = I C ω.
(6.4)
A similar simpliſcation is achieved if the reference point on the rigid body happens to be an inertial point, i.e., if v B = 0. In this case, eq. (6.2) reduces to
204
6 Kinetics of rigid bodies
H B = I B ω.
(6.5)
Note that the angular momentum vector and the tensor of mass moments of inertia are quantities computed with respect to a speciſc point. Notations I C and I B denote the tensors of mass moments of inertia computed with respect to points C and B, respectively. Similarly, H C and H B indicate the angular momentum vectors evaluated with respect to points C and B, respectively.
6.2 The kinetic energy The kinetic energy of a particle, eq. (3.10), is deſned as K = 1/2 mv T v, where m is the mass of the particle and v its inertial velocity vector. The kinetic energy of a differential element of the rigid body located at point Q is now K = 1/2 ρdV v TQ v Q , ' and that of the entire body becomes K = 1/2 V v TQ v Q ρdV. The velocity ſeld of a rigid body is described by eq. (5.10) as v Q = v B + ω s and the kinetic energy now becomes % 1 K= (v T v + 2v TB ω s + sT ω T ω s) ρdV. 2 V B B Because vector v B is the velocity of reference point B and ω the angular velocity vector of the rigid body, this expression is recast as % % % 1 K= ρdV v TB v B + 2vTB sT ρdV ω + ω T s sT ρdV ω . 2 V V V The ſrst bracketed term simply represents the total mass of the rigid body. The second bracketed' term is related to the location of the center of mass of the rigid body, eq. (3.56), V s ρdV = mr BC . Finally, the last bracketed term is the tensor of mass moments of inertia evaluated with respect to point B deſned by eq. (6.1). The kinetic energy expression now reduces to K=
" 1! T m v TB v B + 2mv TB rBC ω + ωT I B ω . 2
(6.6)
Here again, it is possible to simplify this expression by selecting the center of mass of the rigid body as the reference point; this implies r CC = 0, and hence, K=
1 1 m v TC v C + ω T I C ω. 2 2
(6.7)
The ſrst term represents the kinetic energy associated with the translational motion of the rigid body, and the second represents that associated with the rotation of the body. The expression for the translational kinetic energy of the rigid body, 1/2 m v TC v C , is identical to that of a particle of mass m moving at velocity v C . The rotational motion of the body about its center of mass is associated with an additional amount of kinetic energy called rotational kinetic energy, 1/2 ω T I C ω, that is a quadratic function of the angular velocity of the rigid body.
6.3 Properties of the mass moment of inertia tensor
205
Because the kinetic energy is a positive quantity, the translational energy must always be positive, i.e., 1/2 m v TC v C > 0 for any vector v C = 0; it follows that the mass of the body, m, must be positive number, a forgone conclusion. The same argument applied to the rotational kinetic energy yields 1/2 ω T I C ω > 0 for all angular velocity vectors ω = 0; this implies that the tensor of mass moments of inertia, I C , is a positive-deſnite tensor, eq. (1.53).
6.3 Properties of the mass moment of inertia tensor This section investigates the properties of the mass moment of inertia tensor. If the location of the reference point of the rigid body is changed, the components of the mass moment of inertia tensor change according to the parallel axis theorem studied in section 6.3.1. Furthermore, section 6.3.2 shows that the components of the mass moment of inertia tensor change according to the rules of transformation for secondorder tensors if the orientation of the body attached basis is modiſed. 6.3.1 The parallel axis theorem In the previous section, the mass moment of Q inertia tensor was evaluated with respect to an q s arbitrary reference point of the body and with i3 C respect to its center of mass. Figure 6.2 derPC B picts the conſguration of the rigid body: s is the position vector of a material point Q of the O i2 rigid body with respect to reference point B, i1 I and q is the position vector of the same point with respect to the center of mass C. Clearly, Fig. 6.2. Evaluating the mass moments s = rBC +q, where rBC is the position vector of inertia with respect to a reference of the center of mass with respect to point B. point B and the center of mass C. The tensor of mass moments of inertia evaluated with respect to point B is now % % T IB = s sT ρdV = ( rBC + q)( rBC + qT ) ρdV. V
V
Expanding the integrand and taking advantage of the fact that r BC can be factored out of the integral sign leads to % % % T T I B = m rBC rBC + rBC qT ρdV + q ρdV rBC + q qT ρdV. V
'
V
V
The two middle terms vanish because V q ρdV = m rCC = 0. The last term is the mass moment of inertia tensor, I C , evaluated with respect to the center of mass, and hence, T I B = I C + m rBC rBC . (6.8)
206
6 Kinetics of rigid bodies
B C Let Iij and Iij be the components of the mass moment of inertia tensors I B and I C , T
be the components of vector r BC , all resolved in respectively, and let x1 , x2 , x3 a given basis. The diagonal components of tensor I B now become B C = I11 + m(x22 + x23 ), I11
(6.9a)
B I22 B I33
(6.9b)
= =
C I22 C I33
+ +
m(x21 m(x21
+ +
x23 ), x22 ).
(6.9c)
B C and I11 of the mass moment of inertia tensor are evaluated with Components I11 respect to two different points, an arbitrary point B and the center of mass, respectively, but in the same basis, i.e., with respect to parallel axis systems; hence, the name of parallel axes theorem. The properties of the center of mass were used in the derivation of this theorem, B R hence, it is incorrect to write I11 = I11 + m(x22 + x23 ) if points B and R are two arbitrary points of the rigid body. Because the second term on the right-hand side of eqs. (6.9) is strictly positive, B C it follows I11 > I11 , that is, the moment of inertia always increases when moving away from the center of mass. In other words, the minimum value of I11 is obtained when it is computed with respect to the center of mass. The off-diagonal terms of tensor of moments of inertia are called products of inertia; in view of eq. (6.8), they become B C I23 = I23 − mx2 x3 ,
(6.10a)
− mx1 x3 ,
(6.10b)
− mx1 x2 .
(6.10c)
B I13 B I12
= =
C I13 C I12
In this case, the second term on the right-hand side could be positive or negative; consequently, products of inertia could increase of decrease when moving away from the center of mass. Theorem 6.1 (Parallel axis theorem). The components of the mass moment of inertia tensor of a rigid body computed with respect to an arbitrary point B are related to their counterparts resolved in the same basis but computed with respect to the body’s center of mass by eqs. (6.9) and (6.10).
6.3.2 Change of basis In the previous section, relationships were derived between the components of the tensor of mass moments of inertia evaluated with respect to two different points, but resolved in the same basis. In this section, relationships are sought between the components of this tensor resolved in two different bases, but evaluated with respect to the same point.
6.3 Properties of the mass moment of inertia tensor
207
Consider two bases, B and B , and let R be the components of the rotation tensor that brings basis B to basis B , resolved in basis B. Equation (6.3) then implies ⎡ ⎤ ⎡ ⎤ I11 I12 I13 I11 I12 I13 ⎦ ⎣I12 I22 I23 (6.11) = RT ⎣I12 I22 I23 ⎦ R, I13 I23 I33 I13 I23 I33 where I and I are the components of the mass moment of inertia tensor in bases B and B, respectively. It is instructive to look at the transformation laws for speciſc components. The rotation tensor will be represented by its direction cosines, ⎡ ⎤ 1 m1 n 1 R = ⎣2 m2 n2 ⎦ . (6.12) 3 m3 n 3 First, the diagonal terms of I are = 21 I11 + 22 I22 + 23 I33 + 22 3 I23 + 21 3 I13 + 21 2 I12 , I11 I22
=
m21 I11
+
m22 I22
+
m23 I33
(6.13a)
+ 2m2 m3 I23 + 2m1 m3 I13 + 2m1 m2 I12 , (6.13b)
I33 = n21 I11 + n22 I22 + n23 I33 + 2n2 n3 I23 + 2n1 n3 I13 + 2n1 n2 I12 ,
(6.13c)
Next, the off-diagonal terms of I are = n1 m1 I11 + n2 m2 I22 + n3 m3 I33 + (n2 m3 + n3 m2 )I23 I23
+ (n1 m3 + n3 m1 )I13 + (n1 m2 + n2 m1 )I12 . = n1 1 I11 + n2 2 I22 + n3 3 I33 + (n2 3 + n3 2 )I23
(6.14a)
I13
+ (n1 3 + n3 1 )I13 + (n1 2 + n2 1 )I12 . = 1 m1 I11 + 2 m2 I22 + 3 m3 I33 + (2 m3 + 3 m2 )I23
(6.14b)
I12
+ (1 m3 + 3 m1 )I13 + (1 m2 + 2 m1 )I12 .
(6.14c)
6.3.3 Principal axes of inertia The tensor of mass moments of inertia was shown to be a symmetric, positive-deſnite tensor. In view of section 1.4.2, its eigenvalues must be real and positive. Furthermore, it is always possible to construct a set the orthogonal eigenvectors that will diagonalize this tensor, see eq. (1.64). Let u1 , u2 , and u 2 be the eigenvector of the tensor of mass moments of inertia, and P = u1 , u2 , u3 . It the follows that ⎡ ∗ ⎤ I1 0 0 P T I P = diag(Ii∗ ) = ⎣ 0 I2∗ 0 ⎦ , 0 0 I3∗
(6.15)
208
6 Kinetics of rigid bodies
where I1∗ , I2∗ , and I3∗ are the eigenvalues of the tensor of mass moments of inertia. For symmetric, positive-deſnite tensors, the eigenvectors can be selected to form an orthogonal tensor, which itself, can be interpreted as a rotation tensor. Let B ∗ be the basis deſned by the eigenvectors; P is then the rotation tensor that brings basis B to basis B ∗ . In view of eq. (6.3), the statement diag(Ii∗ ) = P T I P is a change of basis operation: I and diag(Ii∗ ) are the components of the moment of inertia tensor in bases B and B ∗ , respectively. The transformation deſned by the principal axes of inertia brings the components of the mass moments of inertia tensor to a diagonal form. 6.3.4 Problems Problem 6.1. Kinetic energy for a rigid body undergoing rotational motion A rigid body is in rotational motion about ſxed inertial point O, which does not coincide with the center of mass of the rigid body. Starting from eq. (6.7), prove that the kinetic energy of the rigid body can be expressed in the following form K=
1 ∗T O∗ ∗ ω I ω , 2
(6.16)
where I O∗ is the mass moment of inertia tensor computed with respect to point O. Notation (·)∗ indicates the components of vectors and tensors resolved in a body attached basis.
Problem 6.2. Two interconnected particles in planar motion Figure 6.3 depicts a system of two rigidly interconnected particles undergoing planar motion and subjected to the acceleration of gravity, −g¯ı2 . Point C is the center of mass of the system and θ the angle the massless rigid bar connecting the particles makes with the horizontal. (1) Does the following relationship hold, m1 ¨ r 1 = −m1 g¯ı2 ? (2) If d1 and d2 are the distances from the two particles to the center of mass, prove that d1 m1 = d2 m2 . (3) Does the following relationship hold, ¨r C = −g¯ı2 ? (4) Evaluate the angular momentum vector of the system ˙ (5) Is this angular momentum of the system with respect to its center of mass in terms of θ. preserved? Justify all your answers. YES/NO answers are not valid.
i2
C
d1 m1 rc r1
m2
d2
q
r2
i2
v2 m2 q
g
g
i1 i1
Fig. 6.3. Two interconnected particles in planar motion.
v1
m1
Fig. 6.4. Two interconnected particles in planar motion.
6.3 Properties of the mass moment of inertia tensor
209
Problem 6.3. Two interconnected particles in planar motion Figure 6.4 show a system of two rigidly interconnected particles undergoing planar motion and subjected to the acceleration of gravity, −g¯ı2 . The angle the massless rigid bar connecting the particles makes with the horizontal is denoted θ(t). (1) Determine the initial location of the center of mass, rC0 , and its initial velocity, v C0 . (2) Find the initial angular velocity vector of the system, ω 0 . (3) Find the condition that must be satisſed by the initial velocity vectors of the two particles, v 10 and v 20 . (4) Is the angular momentum of the system preserved? (5) Find the time history of the position vectors of the two particles, r 1 (t) and r 2 (t). Use the following data: m1 = 1.3 kg, m2 = 5.2 kg, r1 (t = 0) = r 10 = 5 ¯ı1 m, r 2 (t = 0) = r 20 = 3 ¯ı2 m, v 1 (t = 0) = v 10 = −2.2 ¯ı1 − 3 ¯ı2 m/s, v 2 (t = 0) = v 20 = 2.12 ¯ı1 + 4.2 ¯ı2 m/s.
Problem 6.4. Moments of inertia of a rectangular plate with side bar A homogeneous rectangular plate of mass M , length a, and width b is connected to a homogeneous rod of mass m and length a/2, as depicted in ſg. 6.5. (1) Determine the mass moment of inertia tensor of the system evaluated with respect to point O, the plate’s geometric center, and resolved in a set of axes parallel to the edges of the plate. (2) Determine the orientation of the principal axes of inertia at point O and the corresponding principal mass moments of inertia. (3) Find the location of the center of mass of the system, point C. (4) Determine the orientation of the principal axes of inertia at point C and the corresponding principal mass moments of inertia. Use the following data: a = 0.48 m, b = 0.24 m, M = 0.5 kg, and m = 0.3 kg.
c
m
m C a
O a
O M
M
b b Fig. 6.5. Rectangular plate with side bar.
Fig. 6.6. Rectangular plate with corner normal bar.
Problem 6.5. Moments of inertia of a rectangular plate with corner normal bar A homogeneous rod of mass m and length c is connected at the corner of a homogeneous rectangular plate of mass M , length a, and width b, as depicted in ſg. 6.6. The rod is normal to the plate. (1) Determine the mass moment of inertia tensor of the system evaluated with respect to point O, the plate’s geometric center, and resolved in a set of axes parallel to the edges of the plate. (2) Determine the orientation of the principal axes of inertia at point O and the corresponding principal mass moments of inertia. (3) Find the location of the center of mass of the system, point C. (4) Determine the orientation of the principal axes of inertia at point C and the corresponding principal mass moments of inertia. Use the following data: a = 0.64 m, b = 0.36 m, c = 0.48 m, M = 0.5 kg, and m = 0.4 kg.
210
6 Kinetics of rigid bodies
Problem 6.6. Moments of inertia of the ƀywheel governor Figure 6.7 shows a simpliſed conſguration of the ƀywheel governor. Two particles of mass m are connected to four articulated bars of length L, which remain in a plane at all times. Angle θ is changing according to the following schedule: θ(t) = π/4 + π/6 sin 2πt. At time t = 0, the system has an angular velocity ω = Ω0 ¯ı3 . (1) Is the angular momentum of the system preserved? (2) Is the angular velocity of the system preserved? (3) Find the time history of the angular velocity vector of the system, ω(t). (4) Plot ω(t)/Ω0 for t ∈ [0, 1] s.
i3
L
L
m
m L
q
L
a2
i1
L/2 m
i2 Fig. 6.7. Flywheel governor.
a1 e2 a r/2 C r/2
M
e1
L/2
Fig. 6.8. Two rigidly connected bars.
Problem 6.7. Rigid bar connected to a shaft Figure 6.8 shows rigid shaft of length L and mass M . Basis E = (¯ e1 , e¯2 , e¯3 ) is attached to the shaft; unit vector e¯1 is aligned with the shaft. A rigid bar of length r and mass m is ¯2 , a ¯3 ) is attached to the bar, e¯3 = a ¯3 and rigidly connected to the shaft. Basis A = (¯ a1 , a α = (¯ e2 , a ¯1 ); unit vector a ¯1 is aligned with the bar. The shaft and bar are homogeneous slender rods, see ſg. 6.42, and their centers of mass coincide at point C. (1) Determine the tensor of mass moments of inertia of the assembly in basis E .
Problem 6.8. Rigid disk connected to a shaft Figure 6.8 shows rigid shaft of length L, radius R, and mass M . Basis E = (¯ e1 , e¯2 , e¯3 ) is attached to the shaft; unit vector e¯1 is aligned with the shaft. A rigid disk of radius r and mass ¯2 , a ¯3 ) is attached to the disk, e¯3 = a ¯3 m is rigidly connected to the shaft. Basis A = (¯ a1 , a and α = (¯ e2 , a ¯1 ); unit vector a ¯2 is normal the disk. The shaft is a homogeneous cylinder, see ſg. 6.40, and the disk a homogeneous thin disk, see ſg. 6.41. Their centers of mass coincide at point C. (1) Determine the tensor of mass moments of inertia of the assembly in basis E .
6.4 Derivatives of the angular momentum vector ˙ , apBecause a rigid body is a system of particles, Euler’s second law, M C = H C plies. Use of this equation calls for the evaluation of the time derivative of the angular momentum vector evaluated with respect to the center of mass of the rigid body, H C = I C ω, see eq. (6.4). The time derivative of this quantity is ˙ = I˙ C ω + I C ω. H ˙ C Evaluation of the mass moment of inertia tensor is a cumbersome task. If the basis in which the components of this tensor are computed changes its orientation
6.5 Equations of motion for a rigid body
211
with respect to the rigid body, I C = I C (t), and this evaluation must be repeated at C each instant in time; furthermore, this implies I˙ = 0. Consequently, it is convenient to select a body attached frame for the evaluation of the mass moments of inertia, which then become constant quantities in time, and their time derivatives vanish. Consider an inertial basis, I, and a body attached basis, B ∗ ; superscript (·)∗ indicates tensor components resolved in basis B ∗ . Let R be the components of the rotation tensor that brings basis I to basis B ∗ , resolved in I. Furthermore, let H C , I C , and ω be the components of the angular momentum vector, mass moment of inertia tensor, and angular velocity vector, respectively, all resolved in basis I. It then follows that RT H C = RT I C R RT ω = I C∗ ω ∗ , where I C∗ and ω ∗ are the components of the mass moment of inertia tensor and angular velocity vector, respectively, resolved in basis B ∗ . The orthogonality of the rotation tensor then implies H C = R I C∗ ω∗ . While the component of I C are time-dependent quantities, those of I C∗ are constants and their time derivatives vanish. The time derivative of the angular momentum vector now becomes ! " ˙ =R ˙ I C∗ ω ∗ + R I C∗ ω˙ ∗ = R I C∗ ω˙ ∗ + ω H (6.17) ∗ I C∗ ω∗ . C Euler’s second law holds true when expressed about the rigid body’s center of mass, but it is equally valid when expresses with respect to an inertial point O, M O = ˙ , see eq. (3.75). Here again, evaluation of the derivative of the angular momentum H O vector involves derivatives of the mass moment of inertia tensor. To ease the evaluation of these derivatives, the ſrst step is to work in a body attached basis B ∗ , and the components of the mass moment of inertia tensor resolved in this basis are denoted I O∗ . Unfortunately, this is not yet sufſcient to guarantee O∗ I˙ = 0. Indeed, point O is an inertial point that is not necessarily a material point of the body; consequently, the mass moments of inertia might still be time-dependent. If inertial point O is a ſxed point on the body, the mass moments of inertia O∗ resolved in the body attached basis become constant and I˙ vanishes. This happens O∗ only if the rigid body is undergoing pure rotation about inertial point O. If I˙ = 0, ˙ = R(I O∗ ω˙ ∗ + ω developments similar to those presented above lead to H ∗ I O∗ ω∗ ). O In summary, the time derivative of the angular momentum vector is ! " ˙ = R I A∗ ω˙ ∗ + ω H (6.18) ∗ I A∗ ω∗ , A when (1) point A is the center of mass of the rigid body, or (2) the rigid body is undergoing pure rotation about inertial point A.
6.5 Equations of motion for a rigid body The equations of motion for a rigid body are derived from the equations of motion for a general system of particles presented in section 3.4.4. The ſrst equation of motion governs the motion of the center of mass of the rigid body, eq. (3.70), and the
212
6 Kinetics of rigid bodies
second equation governs its angular motion, eq. (3.76). The general form of the ſrst equation is F = maC , (6.19) where aC is the inertial acceleration of the center of mass of the rigid body and F the sum of the externally applied forces. The general form of the second equation is ˙ , MC = H C
(6.20)
where H C is the angular momentum computed with respect to the center of mass and M C the sum of the externally applied moments computed with respect to the center of mass. This second equation of motion can be written in several different manners depending on the point with respect to which the externally applied moments are computed. The following four cases will be considered. 1. The sum of the externally applied moments is computed with respect to the center of mass of the rigid body. 2. The sum of the externally applied moments is computed with respect to a pivot point of the rigid body. A pivot point is a point of the body that happens to be an inertial point; clearly, such a point does not always exist. 3. The sum of the externally applied moments is computed with respect to a material point of the rigid body. 4. The sum of the externally applied moments is computed with respect to an arbitrary point. This arbitrary point is not necessarily inertial and is not a material point of the body. The choice among the various forms of the equations is purely a matter of convenience: for speciſc applications, one formulation might lead to simpler equations. The four approaches are detailed in the following sections. 6.5.1 Euler’s equations In view of eq. (6.17), the second equation of motion of the rigid body, eq. (6.20), becomes M C = R(I C∗ ω˙ ∗ + ω ∗ I C∗ ω ∗ ). Multiplying this equation by RT then leads to M ∗C = I C∗ ω˙ ∗ + ω ∗ I C∗ ω ∗ , (6.21) where M ∗C = RT M C is the sum of the externally applied moments computed with respect to the center of mass and resolved in a body attached basis. If this basis coincides with the principal axes of inertia, the mass moment of inertia tensor reduces to a diagonal form, see eq. (6.15), and the governing equations further simplify to " ! ∗ MC1 = I1C∗ ω˙ 1∗ − I2C∗ − I3C∗ ω2∗ ω3∗ , " ! ∗ (6.22) MC2 = I2C∗ ω˙ 2∗ − I3C∗ − I1C∗ ω3∗ ω1∗ , ! C∗ " ∗ ∗ ∗ C∗ ∗ C∗ MC3 = I3 ω˙ 3 − I1 − I2 ω1 ω2 ,
6.5 Equations of motion for a rigid body
213
∗ C∗ ∗ ∗ where M ∗T = diag(I1C∗ , I2C∗ , I3C∗ ). These equaC = MC1 , MC2 , MC3 and I tions are known as Euler’s equations for the angular motion of a rigid body. The sum of the externally applied moments is computed with respect to the center of mass of the rigid body. 6.5.2 The pivot equations The governing equations of a system of particles can also be written with respect ˙ , see eq. (3.75). Furthermore, if this inertial point is to an inertial point, M O = H O also a material point of the rigid body, the time derivative of the angular momentum vector is given by eq. (6.18) and the equation of motion becomes M O = R(I O∗ ω˙ ∗ + ω ∗ I O∗ ω ∗ ). Multiplying this equation by RT then leads to M ∗O = I O∗ ω˙ ∗ + ω ∗ I O∗ ω ∗ ,
(6.23)
where M ∗O = RT M O is the sum of the externally applied moments computed with respect to point O, resolved in a body attached basis. Equation (6.23) only holds if point O is an inertial point that is also a material point of the rigid body; this implies that the rigid body is undergoing pure rotational motion about inertial point O. Point O is then often called a pivot point of the rigid body, and hence, eqs. (6.23) are known as the pivot equations for the angular motion of a rigid body; the sum of the externally applied moments is computed with respect to this pivot point. 6.5.3 Equations of motion with respect to a material point of the rigid body Let point B be a material point of the rigid body. The angular momentum vector computed with respect to this point is given by eq. (6.2) as H B = rBC mv B + I B ω, and it can be related to the angular momentum computed with respect to the center of mass by eq. (3.67) as H B = H C + rBC mv C . Equating these two expressions and taking a time derivative leads to ˙ C + rBC maC + r˙ BC mv C = r˙ BC mv B + rBC maB + (I B ω)· . H In view of eqs. (6.19) and (6.20), the ſrst two terms on the left-hand side are ex˙ + rBC ma = M + rBC F = M , where the last equality pressed as H C C C B follows from eq. (3.61), and the above expression becomes M B = r˙ BC m(v B − v C ) + rBC maB + (I B ω)· . The ſrst term on the right-hand side vanishes because r˙ BC m(v B − v C ) = − vBC mv BC = 0, and ſnally "· ! M B = rBC maB + I B ω .
(6.24)
To evaluate the time derivative of the last term, it is convenient to express the moment of inertia tensor in the body attached basis: (I B ω)· = (R I B∗ ω∗ )· =
214
6 Kinetics of rigid bodies
R(I B∗ ω˙ ∗ + ω ∗ I B∗ ω ∗ ). Resolving all quantities in the body attached basis, eq. (6.24) becomes ∗ M ∗B = rBC RT maB + I B∗ ω˙ ∗ + ω ∗ I B∗ ω∗ , (6.25) where M ∗B is the sum of the externally applied moments computed with respect to material point B of the rigid body, r ∗BC is the position vector of the center of mass with respect to point B, and RT aB the components of the acceleration vector of point B, all resolved in the body attached frame. 6.5.4 Equations of motion with respect to an arbitrary point Let point P be an arbitrary point, i.e., point P is neither inertial, nor a material point of the rigid body. Using eq. (3.61), the moment computed with respect to point P is related to that computed with respect to the center of mass as M P = M C + rP C F . Introducing eqs. (6.19) and (6.20) then leads to ! " ˙ C + rP C maC = rP C maC + R I C∗ ω˙ ∗ + ω MP = H (6.26) ∗ I C∗ ω ∗ , where the last equality follows from eq. (6.17). Resolving all quantities in the body attached basis, eq. (6.26) becomes ∗ I C∗ ω∗ , M ∗P = rP∗ C RT maC + I C∗ ω˙ ∗ + ω
(6.27)
where M ∗P is the sum of the externally applied moments, computed with respect to an arbitrary point P, r∗P C are the components of the position vector of the center of mass with respect to point P, and RT aC the components of the acceleration vector of the center of mass, all resolved in the body attached basis.
6.6 The principle of work and energy In section 3.4.5, the principle of work and energy was derived for a system of particles, see eq. (3.80). For an arbitrary system of particles, the work done by the internal forces explicitly appears in the statement of the principle, which is, consequently, of little practical use. If the system of particles, however, is a rigid body, the work done by the internal forces can be eliminated from the statement of the principle of work and energy, making it a powerful, practical tool. The work done by all external and internal forces acting of the rigid body is found by summing up the work done by all external and internal forces acting on each particle of the body Wti →tf =
N % ( i=1
tf
ti
(F Ti +
N (
f Tij )dr i .
(6.28)
j=1, j=i
The sum of the externally applied forces acting on particle i is denoted F i , f ij denotes the internal forces resulting from the interaction of particles i and j, and dr i is the differential displacement of particle i.
6.6 The principle of work and energy
215
Because the body is rigid, the differential displacements of one of its points can be expressed in terms of the differential displacement of reference point B of the body, dr B , and the differential rotation vector of the body, dψ, as dr i = dr B + , where s is the position vector of particle i with respect to reference point B. dψs i i Introducing this expression for the differential displacement into eq. (6.28) leads to ⎛ ⎞ N % tf N + * ( ( T T ⎝F i + Wti →tf = f ij ⎠ dr B + dψs i . ti
i=1
j=1, j=i
Expanding the scalar products then yields % tf ( N N ( T F i dr B + F Ti sTi dψ Wti →tf = ti
i=1
+
i=1
N (
N (
f Tij drB +
i=1 j=1, j=i
N (
N (
f Tij sTi dψ
i=1 j=1, j=i
⎫ ⎬ ⎭
.
Because quantities dr B and dψ do not depend on the particle number, the various summations appearing in this expression can be regrouped in the following manner % Wti →tf = %
⎡ tf
+ ti
⎣
tf
ti
N ( i=1
N (
N (
T Fi
%
tf
drB +
N (
ti
⎤T f ij ⎦ drB +
i=1 j=1, j=i
%
T si F i
dψ
i=1
tf
ti
⎡ N ( ⎣
N (
⎤T
(6.29)
si f ij ⎦ dψ.
i=1 j=1, j=i
In the ſrst term, the bracketed expression )N represents the sum of all externally applied forces to the rigid body, F = i=1 F i . In the second term, the bracketed expression represents the sum of all moments externally applied to the rigid body, )N M B = i=1 si F i . The third term in this expression vanishes in view of eq. (3.59), and eq. (3.62) implies ' t the vanishing ' t of the last term. Equation (6.29) ſnally reduces to Wti →tf = tif F T dr B + tif M TB dψ. The principle of work and energy, eq. (3.80), applied to a rigid body now becomes % tf % tf F T dr B + M TB dψ = K(tf ) − K(ti ). ti
ti
This result is known as the principle of work and energy. Principle 7 (Principle of work and energy for a rigid body) The work done by the external forces and moments acting on a rigid body equals the change in the rigid body’s kinetic energy.
216
6 Kinetics of rigid bodies
Example 6.1. Rotating disk on a bent arm Figure 6.9 shows a rotating disk connected to a bent arm. Massless arm OAB features a bend of β rad at point A. At point O, a bearing allows the arm to rotate at a constant angular velocity, Ω, with respect to ground. A disk of mass m and radius r rotates at a constant angular velocity, ω, and is connected to the arm at point B by means of a massless shaft. The dimensions of the system are indicated on the ſgure. A planar rotation of magnitude Ωt about axis ¯ı3 brings inertial frame, F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )] to frame F A = [O, A = (¯ a1 , a ¯2 , a ¯3 )] that is attached to the arm; all tensor components resolved in basis A are denoted with superscripts (·) .
d
b2
b2
a
C i3 = a3
e3 b
A
B e2
b3
b3 = e3
r
b1 wt FB
b1
C
B MB
-MB -FB
e1 a2
h
i2
I O i1
Wt
a1
MO
FO
Fig. 6.9. Conſguration of the rotating disk.
A second planar rotation of magnitude β about axis a ¯2 brings basis A to basis E + E and frame F = [A, E = (¯ e1 , e¯2 , e¯3 )] is attached to the arm, with axis e¯3 pointing along the bent segment AB; all tensor components resolved in basis E + are denoted with superscripts (·)+ . Finally, a planar rotation of magnitude ωt about axis e¯3 brings basis E + to basis B ∗ and frame F B = C, B ∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to the rotating disk; all tensor components resolved in basis B ∗ are denoted with superscripts (·)∗ . The components of the rotation tensor that brings inertial basis I to basis B ∗ , resolved in basis I, will be constructed as R = RΩ Rβ R+ , where RΩ , Rβ , and R+ ω ω are the components of the rotation tensors that bring basis I to basis A , A to E + , and E + to B ∗ , respectively, resolved in bases I, A , and E + , respectively. Compute the forces and moments acting in the shaft at point B, those acting in the arm at the same point, and ſnally, the forces and moments acting in the bearing at point O. The angular velocity of the disk is readily obtained from the addition theorem as ω = Ω¯ı3 + ω¯b3 . The components of the angular velocity and acceleration vectors then become +
6.6 The principle of work and energy
217
⎧ ⎧ ⎫ ⎫ ⎨−ΩSβ Cω ⎬ ⎨ ΩωSβ Sω ⎬ ω ∗ = Ω(RΩ Rβ Rω+ )T ¯ı3 + ωb∗3 = ΩSβ Sω , and ω˙ ∗ = ΩωSβ Cω , ⎩ ⎩ ⎭ ⎭ ΩCβ + ω 0 where CΩ = cos Ωt, Cβ = cos β, and Cω = cos ωt, with similar expressions for the sine functions of the corresponding angles. The inertial position of the center of mass of the disk is r C = d¯b3 ; its acceleration ˙ + ω ω )¯b3 . The components of this acceleration vector vector then becomes aC = d(ω ∗ ∗ ∗ ˙ in basis B then become aC = d(ω +ω ∗ω ∗ )¯b∗3 , or ⎧ ∗ ⎫ ⎧ ⎫ ⎨ ω˙ 2 + ω1∗ ω3∗ ⎬ ⎨−Ω 2 Sβ Cβ Cω ⎬ Ω 2 Sβ Cβ Sω . a∗C = d −ω˙ 1∗ + ω2∗ ω3∗ = d ⎩ ⎩ ⎭ ∗2 ∗2 ⎭ −Ω 2 Sβ2 −ω1 − ω2 Body attached frame F B is located at the center of mass of the disk and is aligned with its principal axes of inertia. Figure 6.41 gives the principal mass moments of C∗ C∗ C∗ inertia of the disk as I11 = I22 = mr2 /4 and I33 = mr2 /2. With the help of the free body diagram shown in ſg. 6.9, the equations of motion of the disk, see eqs. (6.19) and (6.21), then become ⎧ ⎫ ⎨−Sβ Cβ Cω ⎬ Sβ Cβ Sω , F ∗B = mdΩ 2 ⎩ ⎭ −Sβ2 and MB∗ − ab∗3 F ∗B
⎫ ⎧ ΩωSβ Sω + ΩSβ Sω (ΩCβ + ω) ⎬ ⎨ 1 = mr2 ΩωSβ Cω + ΩSβ Cω (ΩCβ + ω) ⎭ ⎩ 4 0 ⎧ ⎫ ⎨ Sω ⎬ mr2 Ω(2ω + ΩCβ )Sβ Cω , = ⎩ ⎭ 4 0
(6.30)
respectively. The resultant of the externally applied moments was computed with respect to the center of mass, as required by eq. (6.21). In these equations, F B and M B are the externally applied force and moment vectors acting on the disk at point B. Eliminating force F ∗B from the equations of motion yields an expression for moment M ∗B , ⎧ ⎫ 2 ⎨ Sω ⎬ mr Cω . Ω(2ω + ΩCβ )Sβ − madΩ 2 Sβ Cβ M ∗B = ⎩ ⎭ 4 0 ∗ , vanishes; this implies that no moment needs The third component of moment, MB3 to be applied to the disk about unit vector ¯b3 to maintain its constant angular velocity, ω. Due to the presence of the trigonometric functions Sω = sin ωt and Cω = cos ωt,
218
6 Kinetics of rigid bodies
the components of the moment vector, M B , acting on the disk are time-dependent when resolved in the disk attached basis B ∗ . This implies that the shaft will be subjected to fatigue loading and as the angular speed, ω, of the disk increases, it will accumulate an increasing amount of loading cycles per unit time. On the other hand, the components of the same moment resolved in the arm + ∗ attached basis, E + , denoted M + B = Rω M B , become M+ B =
2
mr Ω(2ω + ΩCβ )Sβ − madΩ 2 Sβ Cβ 4
⎧ ⎫ ⎨0⎬ 1 . ⎩ ⎭ 0
(6.31)
Unlike the shaft carrying the disk, the arm is subjected to a constant bending moment. It is easily veriſed that the components of force in the arm attached basis, F + = R+ F ∗ , are also constant in time. ω Figure 6.9 also shows a free body diagram of the arm; because this component is massless, the equations of statics apply: the sum of both forces and moments must vanish. This yields the following expressions for the externally applied force and moment vectors at point O, denoted F O and M O , respectively: F O = F B and M O = M B + rOB F B . The components of these vectors, expressed in basis A , + + are F O = Rβ F + OB F+ B and M O = Rβ (M B + r B ), respectively, and are, of course, constant in time. Finally, the forces and moments acting on the bearing at point O, resolved in the inertial frame, are F O = RΩ F O and M O = RΩ M O , respectively. The third component of moment, MO3 , vanishes: no moment needs to be applied to the arm about axis ¯ı3 to maintain the constant angular velocity, Ω, of the system. Because SΩ = sin Ωt and CΩ = cos Ωt, the other loading components are time-dependent: as expected, the bearing will be subjected to cyclic loading. The bearing is subjected to loads oscillating at a frequency Ω, in contrast with those acting in the shaft, which have a frequency ω. Point A is a ſxed point, or pivot point, of the disk: rotation about the shaft and rotation of the bent arm leave point A at an inertial location. Furthermore, point A is a material point of the disk, consequently, the pivot equation, eq. (6.23), could have been used instead of Euler’s equation, eq. (6.21). The mass moment of inertia tensor of the disk with respect to point A can be obtained from its counterpart about point C with the help of the parallel axis theorem, eq. (6.9), to ſnd I1A∗ = m(r2 /4 + d2 ), I2A∗ = m(r2 /4+d2 ), I3A∗ = mr2 /2. The pivot equation about point A now becomes ⎫ ⎧ 2 ⎨ (r /4 + d2 )ωSω + (r2 /4 − d2 )Sω (ΩCβ + ω) ⎬ M ∗B +(d−a)b∗3 F ∗B = mΩSβ (r2 /4 + d2 )ωCω + (r2 /4 − d2 )Cω (ΩCβ + ω) . ⎭ ⎩ 0 This equation is equivalent to that derived above. Indeed, introducing the expression for the force F ∗B from eq. (6.30), leads again to eq. (6.31) for the externally applied moment M ∗B .
6.6 The principle of work and energy
219
Example 6.2. Swiveling plate Figure 6.10 shows a homogeneous, rectangular plate of height a, width b, and mass m connected to the ground by a rigid, massless link of length d. At point O, a bearing allows the link to rotate with respect to axis ¯ı3 , and at point B, the plate is free to rotate with respect to the link about axis a ¯1 . Three frames are used in this problem: the inertial frame, F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )], a frame attached to the link, F A = [O, A+ = (¯ a1 , a ¯2 , a ¯3 )], and ſnally, a frame attached to the plate’s center of mass, F B = C, B ∗ = (¯b1 , ¯b2 , ¯b3 ) . Tensor components resolved in bases A+ and B ∗ are denoted with superscripts (·)+ and (·)∗ , respectively. A planar rotation of magnitude α about axis ¯ı3 brings basis I to basis A+ , a planar rotation of magnitude β about axis a ¯1 brings basis A+ to basis ∗ B , and rotation tensors Rα and Rβ are associated with these two planar rotations, respectively
i3 = a3
I
i1
a a1
+ A O
a2
B b3
d
B
b
B C
a/2 *
g
b2
b/2 i2
b3
MB
FB
a/2
MO
C
b2
FO
b1 mg i2
O b/2 b1 = a1
B
-FB
-MB Fig. 6.10. Conſguration of the swiveling plate.
The inertial angular velocity vector of the plate is readily found with the help of ˙ a1 . The components of the angular velocity and the addition theorem as ω = α¯ ˙ a3 + β¯ acceleration vectors resolved in basis B ∗ are then found to be ⎧ ⎧ ⎫ ⎫ β¨ ⎨ β˙ ⎬ ⎨ ⎬ ˙ + ˙ β , ˙ β+T a ¯+ ω∗ = αR αS ˙ β , and ω˙ ∗ = α ¨ Sβ + α˙ βC 3 + βa1 = ⎩ ⎩ ⎭ ˙ β⎭ αC ˙ β α ¨ Cβ − α˙ βS respectively. The inertial position of the center of mass of the plate is r C = (d + a/2)¯ a1 and the acceleration vector aC = (d + a/2)(¨ αa ¯2 − α˙ 2 a ¯1 ); the components ∗ of this vector resolved in basis B then become ⎧ ⎫ ⎨ −α˙ 2 ⎬ a α ¨ Cβ . a∗C = (d + ) ⎭ 2 ⎩ −α ¨ Sβ Body attached frame F B is located at the plate’s center of mass and is aligned with its principal axes of inertia, see ſg. 6.45. The principal mass moments of inertia
220
6 Kinetics of rigid bodies
C∗ C∗ C∗ are I11 = mb2 /12, I22 = ma2 /12, I33 = m(a2 + b2 )/12. Figure 6.10 shows a free body diagram of the plate; F B and M B are the externally applied force and moment vectors acting on the plate at point B. The equations of motion for the plate, see eqs. (6.19) and (6.21), then become ⎧ ⎧ ⎫ ⎫ ⎨ −α˙ 2 ⎬ ⎨ Sα ⎬ a Cα Cβ = m(d + ) α ¨ Cβ , F ∗B + mg (6.32) ⎩ ⎭ ⎭ 2 ⎩ −Cα Sβ −α ¨ Sβ
and M ∗B
⎫ ⎧ b2 β¨ + b2 α˙ 2 Sβ Cβ ⎬ a ∗ ∗ m⎨ ˙ β ) − a2 α˙ βC ˙ β − b1 F B = , a2 (¨ αSβ + α˙ βC 2 12 ⎩ 2 ˙ β ) − (b2 − a2 )α˙ βS ˙ β⎭ (a + b2 )(¨ αCβ − α˙ βS
respectively. After simpliſcation, this last equation becomes ⎫ ⎫ ⎧ ⎧ ∗ b2 (β¨ + α˙ 2 Sβ Cβ ) MB1 ⎬ ⎬ ⎨ ⎨ m ∗ ∗ a2 α MB2 + a/2 FB3 ¨ Sβ = = M ∗I , ⎭ ⎩ ∗ 12 ⎩ 2 ∗ ⎭ ˙ β MB3 − a/2 FB2 (a + b2 )¨ αCβ − 2b2 α˙ βS
(6.33)
where M ∗I represents the right-hand side of this equation. The ſrst component of ∗ moment, MB1 , must vanish because the plate is free to rotate with respect to the arm ¯ about axis b1 ; this reveals the ſrst equation of motion of the problem, β¨ + α˙ 2 Sβ Cβ = 0. Figure 6.10 also shows a free body diagram of the massless arm OB; F O and M O are the externally applied force and moment vectors acting on the arm at point O. The moment equilibrium equation about point O, expressed in basis A+ , is M + O− + + + + + d a+ a+ 1 F B −M B = 0. Introducing eq. (6.33) then yields M O = (d+a/2) 1 F B +M I . With the help of eqs. (6.32) and (6.33), this applied moment at point O becomes ⎧ ⎫ 0 ⎨ ⎬ 2 b ˙ − S (¨ α C − 2 α ˙ βS ) M+ = m . β β O 12 β ⎩ a2 ⎭ b2 2 ˙ ¨ + 12 Cβ (¨ αCβ − 2α˙ βSβ ) + (d + a/2) α ¨ − g(d + a/2)Cα 12 α Here again, the conſguration of the system implies the vanishing of the third component of this moment, M + O3 . The equations of motion of the system correspond ∗ to the vanishing of two components of moment, M + O3 = 0 and M B1 = 0, or ˙ β Cβ = (d + a/2)gCα , a2 /12 + b2 /12 Cβ2 + (d + a/2)2 α ¨ − b2 /6 α˙ βS β¨ + α˙ 2 Sβ Cβ = 0, respectively. The two conditions leading to the equations of motion of the problem can be expressed as scalar products: ¯bT1 M B = 0 and ¯ıT3 M O = 0, which are easily ∗ evaluated when the vectors are expressed in an appropriate basis: ¯b∗T 1 M B = 0 and +T + ¯ı3 M O = 0.
6.6 The principle of work and energy
221
Example 6.3. Rigid body connected to a spring and dashpot Figure 6.11 depicts a rigid body connected to the ground at point B by means of a spring of stiffness constant k and dashpot of constant c. The rigid body is of mass M and its moment of inertia tensor with respect to the center of mass is I C . Vector η deſnes the position of the center of mass with respect to point B. Frame F B = B, B ∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to the rigid body; superscript (·)∗ indicates tensor components resolved in basis B ∗ . The components of the rotation tensor that brings basis I to basis B ∗ , resolved in basis I, are denoted R. Find the equations of motion of the system. i3
FB = - F u g
i2
O I
B
b3
h
c i1
k
C
b2 B h
b1
C
- Mg i3 Free body diagram
Fig. 6.11. Conſguration of the rigid body connected to a spring and dashpot.
Let xB and xC be the position vectors of points B and C with respect to point O; it follows that xB = xC − η. The force vector, F B , applied to the rigid body at point B then acts in the direction of unit vector u ¯ = xB /xB , or F B = −F u ¯, ˙ where F is the magnitude of the applied force. It then follows that F = kΔ + cΔ, where Δ = xB − 0 is the stretch of the spring and 0 its un-stretched length. The time rate of change of the stretch is easily found as Δ˙ = u ¯T x˙ B . The equation of motion for the center of mass is M x ¨ C = −F u¯ −M g ¯ı3 . Euler’s equation, eq. (6.21), implies I C∗ ω˙ ∗ + ω ∗ I C∗ ω ∗ = RT [− η (−F u ¯)], where the right-hand side represents the moment of the externally applied forces, resolved in basis B ∗ . Although it is convenient to work with the components of all vectors and tensors resolved in the body attached basis, it is also possible to use the corresponding components resolved in the inertial basis. Multiplying by R leads to I C ω˙ + ω I C ω = F ηu ¯, where all vectors and tensors are now resolved in the inertial basis. For numerical solution of the equations of motion, it is convenient to recast them as a set of ſrst-order equations by introducing the velocities of the center of mass, v C , and a set of parameters, q, that represent the rotation of the rigid body. These parameters could be selected as Euler angles with a speciſc sequence of planar rotations, see section 4.11. The angular velocity of the body then becomes ω = H(q)˙q . For Euler angles with the sequence 3-1-3 deſned in section 4.11.1, the tangent operator, H, is given by eq. (4.68). The complete set of ſrst-order equations now becomes
222
6 Kinetics of rigid bodies
⎫ ⎧ ⎫ ⎧ vC x˙ C ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎬ ⎨ ⎬ ⎨ H −1 ω q˙ . = −F/M u ¯ − g¯ı3 ⎪ ⎪v˙ C ⎪ ⎪ ⎪ ⎪ ⎪ ⎩ C −1 ⎭ ⎩ ⎭ ⎪ C ω˙ (I ) (F ηu ¯−ω I ω)
(6.34)
This formulation requires the tangent operator, H, to be singularity free; as discussed in section 4.11.1, such is not the case for Euler angles with the sequence 3-1-3, for which H −1 is singular then angle θ = 0. 6.6.1 Problems Problem 6.9. Kinetic energy of a rigid body Derive an expression for the rotational kinetic energy of a rigid body. Use a body attached frame with its origin at the center of mass and orientation that coincides with the principal axes of inertia. The orientation of the body attached frame with respect to an inertial frame will be determined by Euler angles with the 3-1-3 sequence, see section 4.11.
Problem 6.10. Rigid body connected to a ſxed point Point C is the center of mass of a rigid body of arbitrary shape. This point is connected to an inertial point O by means of a ball and socket joint. Point C and O are coincident. The only externally applied forces are the gravity forces and the reactions at point O. (1) Prove that the angular momentum vector H O of the body is of constant magnitude and direction. (2) Prove that the kinetic energy of the body remains a constant. (3) Show that the magnitude of the projection of the angular velocity vector along the direction of the angular momentum vector is a constant; ſnd this constant.
Problem 6.11. Rigid body moving along a curve A rigid body freely slides along a given curve C in three-dimensional space. A point of the curve has a position vector p0 (s). The position of the reference point of the rigid body is p0 (s) and its orientation is determined by Frenet’s triad R(s) = [t¯(s), n ¯ (s), ¯b(s)]. Find the equation of motion for the rigid body if it is subjected to externally applied forces and moments. Hint: the only degree of freedom of the problem is s, the position of the body along the curve.
Problem 6.12. Spinning rotor mounted on a rotating disk Figure 6.12 depicts a homogeneous disk of mass M and radius R rotating about inertial axis e1 , e¯2 , e¯3 ) is attached to the disk. The disk rotates about unit ¯ı3 . Frame F D = O, E + = (¯ vector ¯ı3 at a constant angular velocity, Ω. At the rim of the disk, a rigid massless shaft of length d extends in the radial direction and connects to a homogeneous disk of mass m and radius r spinning about unit vector e¯1 at a constant angular velocity, ω. (1) Find the three components of the reaction force in the bearing at point B, resolved in basis E + . (2) Find the three components of the reaction moment in the bearing at point B, resolved in basis E + .
Problem 6.13. Spinning rotor mounted on a rotating disk Figure 6.12 depicts a homogeneous disk of mass M and radius R rotating about inertial axis e1 , e¯2 , e¯3 ) is attached to the disk. Torque T is applied to the ¯ı3 . Frame F D = O, E + = (¯ disk and act about unit vector ¯ı3 . At the rim of the disk, a rigid massless shaft of length d extends in the radial direction and connects to a homogeneous disk of mass m and radius r spinning about unit vector e¯1 . Frame F R = R, B∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to the rotor. Torque Q is applied to the rotor and act about unit vector e¯1 . (1) Develop the equations of
6.6 The principle of work and energy
223
motion of the system in terms of angles φ and θ, where θ is the rotation of the rotor about unit vector e¯1 . (2) Find the three components of the reaction moment in the bearing at point B, resolved in basis E + . (3) Find the three components of the reaction force in the bearing at point B, resolved in basis E + . (4) Find the three components of the reaction moment in the bearing at point O, resolved in basis E + and I. (5) Find the three components of the reaction force in the bearing at point O, resolved in basis E + and I. (6) After an initial start-up phase, the disk and rotor spin at constant angular velocities, φ˙ = Ω and θ˙ = ω, respectively. Determine the reaction forces and moments of questions (2) to (5).
e2
T M, R i1
i3 = e3
g
i3 = e3
e2
r O
g
B
I O B f
e1
i2 m, r R
d
Q
Fig. 6.12. Spinning rotor mounted on a rotating disk.
i1
i2
f b
q e1 w
Fig. 6.13. Plate hinged at the rim of a rotating disk.
Problem 6.14. Plate hinged at the rim of a rotating disk Figure 6.13 depicts a homogeneous disk of mass M and radius R rotating about inertial axis e1 , e¯2 , e¯3 ) is attached to the disk. At point B, a point on the ¯ı3 . Frame F D = O, E + = (¯ rim of the disk, a homogeneous plate of mass m, length b, and width w is hinged to the disk. The hinge’s axis is aligned with unit vector e¯2 ; a torsional spring of stiffness constant k and a torsional dashpot of constant c are located at the hinge. The torsional spring is un-stretched when θ = θ0 . The system is subjected to gravity acting in the direction indicated on the ſgure. (1) Develop the equations of motion of the system in terms of angles φ and θ indicated on the ſgure. (2) On one graph, plot angles φ and θ versus τ . (3) On one graph, plot angular speeds φ and θ . (4) On one graph, plot angular accelerations φ and θ . (5) Plot the cumulative energy, ¯ d = W d /k, dissipated in the dashpot. (6) On one graph, plot the kinetic, K ¯ = K/k and W potential, V¯ = V /k energies of the system. Check that the energy closure equation is satisſed. (7) On one graph, plot the three components of the moment in the bearing at point B, resolved in basis E + . (8) On one graph, plot the three components of the force in the bearing at point B, resolved in basis E + . Use the following data: μ = M/m = 1.5, w ¯ = w/b = 0.2, ¯ = R/b = 0.2, ζ = ωc/(2k) = 0.05, g¯ = g/(bω 2 ) = 2, θ0 = 0. A non-dimensional time R is deſned, τ = ωt, where ω 2 = 3k/(mb2 ); notation (·) indicates a derivative with respect to τ . Use the following initial conditions, φ(τ = 0) = 0, θ = 0, φ = 1, θ = −1. Present all your results for τ ∈ [0, 20].
Problem 6.15. Spinning Satellite
Frame F = B, B∗ = (¯b1 , ¯b2 , ¯b3 ) is attached to a satellite. Point B is the satellite’s center of mass and basis B∗ is aligned with its principal axes of inertia. Tensor components resolved in
224
6 Kinetics of rigid bodies
basis B∗ are denoted with a superscript (·)∗ . The components of the angular velocity vector of the satellite, resolved in B∗ , are denoted ω ∗ . The mass moments of inertia are I1∗ = 12, I2∗ = 16 and I3∗ = 20 kg.m2 . During a maneuver, thrusters apply a moment M (t) to the satellite. For t ≤ T , M ∗ (t) = Q∗ sin 2πt/T , and for t > T , M ∗ (t) = 0, where T = 5 s. The initial angular velocity of the satellite is ω ∗T (t = 0) = 0, 0.5, 0 rad/s. Moment vector Q∗ is deſned by its components in the body attached basis. Two cases will be considered here: for case 1, Q∗T = 0, 5, 0 N·m, for case 2, Q∗T = 5, 0, 0 N·m. (1) Solve Euler’s equation for the time history of the angular velocity of the satellite. (2) On one graph, plot the three components of the angular velocity vector in the body attached frame as a function of time for t ∈ [0, 30T ]. Present one graph for case 1 and one for case 2. (3) At the end of the maneuver, will the orientation of the satellite remain ſxed with respect to an inertial frame for case 1? What about case 2?
Problem 6.16. Double spatial pendulum Figure 6.14 depicts a double spatial pendulum consisting of two bodies subjected to gravity. The ſrst body, of mass ma and mass moment of inertia tensor I Ca , is connected to the ground at point O by means of a ball and socket joint. The position vectors of points O and B with respect to the center of mass, Ca , of the body are denoted η a and μa , respectively. The second body, of mass mb and mass moment of inertia tensor I Cb , is connected to the ſrst body at point B though a ball and socket joint. The position vector of point B with respect to the a1 , a ¯2 , a ¯3 )] center of mass, Cb , of the body is denoted η b . Two frames, F A = [Ca , A = (¯ and F B = Cb , B = (¯b1 , ¯b2 , ¯b3 ) , are attached to the ſrst and second body, respectively. Let Ra and Rb be the rotation tensors that bring basis I to A and basis I to B, respectively. Tensor Ra will be represented with Euler angles φa , θa , and ψa using the 3-1-3 sequence, and Euler angles φb , θb , and ψb , also using the 3-1-3 sequence, represent tensor Rb . (1) Draw free body diagrams for each of the bodies. (2) Derive the equations of motion of the system. Carefully deſne all terms appearing in the equations.
i2
g
i3 = a3
i1
O a ha 2 a1 Ca ma ma a 3 i3
B
Cb mb
B
i1
i2
a1 b 3
Wt q
hb
b2
a2
r O
g b1 b3
Fig. 6.14. Conſguration of the double spatial pendulum.
b2 C b1
w
Fig. 6.15. Conſguration of the plate hinged at the rim of a disk.
Problem 6.17. Plate hinged at the rim of a disk The system depicted in ſg. 6.15 features a disk of radius r rotating at a constant angular velocity Ω about inertial axis ¯ı3 . Frame F A = [O, A = (¯ a1 , a ¯2 , a ¯3 )] is attached to the disk. At point B, a point on the rim of the disk, a homogeneous plate of mass m, length b, and width
6.6 The principle of work and energy
225
w is hinged to the disk; the plate is free to rotate with respect to the disk about axis a ¯2 . Frame F B = C, B = (¯b1 , ¯b2 , ¯b3 ) is attached to the plate; point C is the center of mass of the plate. Line BC is at an angle θ with respect to the vertical. The system is subjected to gravity acting in the direction indicated on the ſgure. Determine the angular speed, Ω, required to maintain a given, constant angle θ.
Problem 6.18. Robotic arm Figure 5.5 shows a robotic system. The shaft is allowed to rotate with respect to an inertial frame F I , about axis ¯ı3 ; the time-dependent angle of rotation is denoted α(t). Frame F S = + S, S = (¯ s1 , s¯2 , s¯3 ) is attached to the shaft at a distance h = 0.5 m from the origin of the inertial frame, as indicated on the ſgure. An arm of length La = 1.2 m, extending along the direction of axis s¯2 , is attached to the shaft at point S. Finally, a rigid manipulator of length Lb = 0.5 m, radius rb = 0.02 m, and mass mb = 10 kg is connected to the arm at point S B. The manipulator is allowed to rotate with respect to frame F∗ , about axis s¯1 ; the timeB dependent angle of rotation is denoted β(t). Frame F = B, B = (¯b1 , ¯b2 , ¯b3 ) is attached to the manipulator. Superscripts (·)∗ and (·)+ denote tensor components resolved in bases B∗ and S + , respectively. Angles α(t) and β(t) are prescribed as α(t) = π/2 (1 − cos πt/T ), and β(t) = 2π(1 − cos πt/T ), respectively, where T = 2 s. The acceleration of gravity is g = 9.81 m/s2 . (1) Compute the components of the force vector F ∗ and moment vector M ∗ applied to the manipulator at point B. (2) On one graph, plot the components of the force vector F ∗ . (3) On one graph, plot the components of the moment vector M ∗ . (4) What is the moment required to rotate the manipulator?
Problem 6.19. Rotating disk on a bent arm Figure 6.9 shows a rotating disk connected to a bent arm. Massless arm OAB features a bend of β rad at point A. At point O, a bearing allows the arm to rotate with an angular velocity Ω with respect to ground. A disk of mass m and radius r rotates with an angular velocity ω and is connected to the arm at point B by means of a massless shaft. A planar rotation about axis a1 , a ¯2 , a ¯3 )] that ¯ı3 brings inertial frame F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )] to frame F A = [O, A = (¯ is attached to thearm. A second planarrotation of magnitude β about axis a ¯2 brings frame A to frame F E = A, E + = (¯ e1 , e¯2 , e¯3 ) that is also attached to the arm, with axis e¯3 pointing along the bent segment AB. Superscripts (·) and (·)+ denote tensor components resolved + a planar rotation about axis e¯3 brings frame E + to in basis A and E ∗, respectively. Finally, B frame F = C, B = (¯b1 , ¯b2 , ¯b3 ) that is attached to the rotating disk; all tensor components resolved in basis B∗ are denoted with superscripts (·)∗ . The components of the rotation tensor , that brings inertial basis I to basis B∗ , resolved in I, is constructed as R = RΩ Rβ R+ ω where RΩ , Rβ , and R+ are the components of the rotation tensors that bring basis I to basis ω
A , A to E + , and E + to B∗ , respectively, resolved in bases I, A , and E + , respectively. The angular velocities of the bent arm are prescribed to be Ω = Ωf (1 − cos 2πt/T )/2 for 0 ≤ t ≤ T /2 and Ω = Ωf for t > T /2. The angular velocities of the disk are prescribed to be ω = ωf (1 − cos 2πt/T )/2 for 0 ≤ t ≤ T /2, and ω = ωf for t > T /2. This represents the start-up sequence for the system from the rest condition to a nominal operating point where the angular velocities of the arm and disk are stabilized to their ſnal values, Ωf and ωf , respectively. These angular velocity proſles are achieved by applying to the bent arm a torque QO (t) about axis ¯ı3 at point O and to the shaft a torque QB (t) about axis ¯b3 at point B. (1) On one graph, plot the time history of angular velocities Ω and ω. (2) On one graph, plot angular accelerations Ω˙ and ω. ˙ (3) Plot the three components of the angular velocity vector of the disk, ω ∗ . (4) Plot the three components of the angular acceleration vector of the disk, ω˙ ∗ . (5) Plot the three components of the moment vector applied to the shaft at point
226
6 Kinetics of rigid bodies
B, M ∗B . (6) Plot the three components of the moment vector applied to the arm at point B, M+ B . (7) Plot the three components of the force vector applied to the arm at point O, F . (8) Plot the three components of the moment vector applied to the arm at point O, M + O . (9) Plot the three components of the moment vector applied to the arm at point O, M O . (10) Plot the cumulative work done by torques QO (t) and QB (t), and the total kinetic energy of the system. (11) Demonstrate by a graph that your predictions satisfy the principle of work and energy. (12) Plot the instantaneous power required by the servomotors located at points B and O. (13) If the servomotors can deliver a maximum power of 50 Watts each, ſnd the minimum time T required to bring the system to steady angular velocities. Use the following data: β = π/6 rad, ωf = 50 rad/s, Ωf = 10 rad/s, r = 0.2 m, m = 10 kg, h = 0.6 m, d = 0.3 m, a = 0.1 m, and T = 15 s.
Problem 6.20. Swiveling plate Figure 6.10 shows a homogeneous, rectangular plate of height a, width b, and mass m connected to the ground by a rigid, massless link of length d. At point O, a bearing allows the link to rotate with respect to axis ¯ı3 , and at point B, the plate is free to rotate with respect to the link about axis a ¯1 . Three frames will be used in this problem: inertial frame a1 , a ¯2 , a ¯3 ) , and F I = [O, I = (¯ı1 , ¯ı2 , ¯ı3 )], a frame attached to the link, F A = O, A+ = (¯ ſnally, a frame attached to the plate at its center of mass, F P = C, B∗ = (¯b1 , ¯b2 , ¯b3 ) . A planar rotation of magnitude α about axis ¯ı3 brings basis I to basis A+ , and a planar rotation of magnitude β about axis a ¯1 brings basis A+ to basis B∗ . Rotation tensors Rα and Rβ repre-
sent these two planar rotations, respectively; tensor components resolved in basis A+ and B∗ are denoted with superscripts (·)+ and (·)∗ , respectively. (1) Derive the equations of motion ˙ of the problem. (2) On one graph, plot the time histories of angles α and β. (3) Plot α˙ and β. (4) On one graph, plot the components of the angular velocity of the plate in basis I. (5) Plot the components of the same vector in basis B∗ . (6) On one graph, plot the kinetic, potential, and total mechanical energies of the system. Comment on your results. (7) On one graph, plot the components of the force applied to the plate at point B resolved in basis B∗ . (8) Plot the components of the moment applied to the plate at point B in basis B∗ . (9) Plot the components of the moment applied to the link at point O in basis I. Use the following data: a = 0.2 m, b = 0.2 m, d = 0.5 m, acceleration of gravity g = 9.81 m/s2 , and m = 2 kg. Present the response on the system for a period of 15 s. At ſrst, use the following initial conditions: α = π/4, β = π/12, and α˙ = β˙ = 0. Next, consider a different set of initial conditions: α = 0, β = π/4, and α˙ = β˙ = 0. Comment on the response of the system for these two sets of initial conditions.
Problem 6.21. Rigid body connected to spring and dashpot Figure 6.11 depicts a rigid body connected to the ground at point B by means of a spring of stiffness constant k and dashpot of constant c. The rigid body is of mass M and its moment of inertia tensor with respect to the center of mass is I C . Vector η deſnes the position of the center of mass with respect to point B. Frame F B = B, B = (¯b1 , ¯b2 , ¯b3 ) is attached to the rigid body. The components of the rotation tensor that brings inertial basis I to basis B, resolved in basis I, are denoted R. (1) Derive the equations of motion of the problem; resolve the components of all vectors and tensors in the inertial frame. (2) On one graph, plot the time histories of the three components of vector x ¯ C . (3) On one graph, plot Euler angles ψ, θ, and φ as a function of τ . (4) On one graph, plot the time histories of the three components of the velocity vector, ¯ v C = v C /(Ω0 ). (5) On one graph, plot the time histories of the three components of the angular velocity vector, ω ¯ = ω/Ω. (6) On one graph, plot the time histories of the forces in the elastic spring and dashpot. (7) On one graph, plot the kinetic and
6.7 Planar motion of rigid bodies
227
potential energies of the system as well as the energy dissipated in the dashpot. Show that the energy closure equation is veriſed. Treat the problem using a non-dimensional scheme with ¯ C = xC /0 . Use the following data: g¯ = g/(0 Ω 2 ) = 0.4, τ = Ωt, Ω 2 = k/M and x C∗ ∗ = I C∗ /(M 20 ) = ζ = c/(2M Ω) = 0.1, η¯ = η ∗ /0 = [0.8, 1.25, −1.8]T , and I¯ T diag(1, 2.3, 1.5). Use the following initial conditions: x ¯ C (τ = 0) = [0, 1, 0], q T (τ = 0) = [0, 0, 0], and the system is at rest. Present the response on the system for τ ∈ [0, 100]. Hint: to avoid singularities, use Euler angles, ψ, θ, and φ, with the 3-2-1 sequence, as deſned in section 4.11.3, to represent the rotation of the rigid body.
6.7 Planar motion of rigid bodies The previous sections have focused on the three-dimensional motion of rigid bodies. In some cases, the motion of the body is restricted to a planar motion: the center of mass of the body moves in an inertial plane and its angular velocity vector is at all time normal to this plane. Let axes ¯ı1 and ¯ı2 deſnes the inertial plane in which the center of mass moves; the position vector of the center of mass then becomes rC = xC1¯ı1 + xC2¯ı2 vector is ω = ω¯ı3 . Next, a body attached frame, F = and the angular velocity C, B = (¯b1 , ¯b2 , ¯b3 ) , is deſned, where point C is the body’s center of mass. For convenience, axes ¯b1 and ¯b2 are selected to be in the plane of the motion whereas ¯b3 is normal to the same plane. It follows that the position vector of the center of mass becomes r C = x∗C1¯b1 + ∗ ¯ xC2 b2 and the angular velocity vector is ω = ω¯b3 . The components of the position vector of the mass center resolved in the inertial basis are xC1 and xC2 , and x∗C1 and x∗C2 are their counterparts resolved in the body attached basis. The only non-vanishing component, ω, of angular velocity vector is the same in both frames: indeed, ω = ω¯ı3 = ω ∗¯b3 implies ω = ω ∗ , since ¯b3 = ¯ı3 is an inertial direction. The acceleration vector of the center of mass is now aC = aC1¯ı1 + aC2¯ı2 = a∗C1¯b1 + a∗C2¯b2 , and the equations of motion for the center of mass, eq. (6.19), becomes F1 = maC1 , F2 = maC2 , and F3 = 0. This last equation implies that the sum of the externally applied forces acting in the di