METHODS
IN
MOLECULAR BIOLOGY™
Series Editor John M. Walker School of Life Sciences University of Hertfordshire Hatfield, Hertfordshire, AL10 9AB, UK
For further volumes: http://www.springer.com/series/7651
DNA Barcodes Methods and Protocols Edited by
W. John Kress and David L. Erickson Department of Botany, National Museum of Natural History, Smithsonian Institution, Washington, DC, USA
Editors W. John Kress, Ph.D. Department of Botany National Museum of Natural History Smithsonian Institution Washington, DC, USA
David L. Erickson, Ph.D. Department of Botany National Museum of Natural History Smithsonian Institution Washington, DC, USA
ISSN 1064-3745 ISSN 1940-6029 (electronic) ISBN 978-1-61779-590-9 ISBN 978-1-61779-591-6 (eBook) DOI 10.1007/978-1-61779-591-6 Springer New York Dordrecht Heidelberg London Library of Congress Control Number: 2012931933 © Springer Science+Business Media, LLC 2012 All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Humana Press, c/o Springer Science+Business Media, LLC, 233 Spring Street, New York, NY 10013, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks, and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights. Printed on acid-free paper Humana Press is part of Springer Science+Business Media (www.springer.com)
Foreword The diversity of life in a hectare of reef, a county of grassland, or a shipload of imports challenges biologists called to identify the species comprising biodiversity, functioning as ecosystems, or invading ports. The sequences of black-and-white barcodes that empower a newly hired clerk to wave a wand over a cart full of goods swiftly, print an itemized receipt infallibly, and order replacements invisibly call forth a vision of an analog for identifying species. The resemblance of barcodes on commercial products to sequences of DNA shown as black-and-white bars on electrophoretic gels reinforced the vision back in 2003 in the founding meetings of the barcode of life movement. This book edited by early adopters of DNA barcodes, John Kress and David Erickson, proves the barcode of life has arrived in environmental science. In less than a decade, they and the other authors in this volume have realized the vision of a short DNA sequence on a uniform locality of the genome to identify species rapidly and accurately. Because the currency in biology is species, their identification is no academic diversion. Biologists count the rise and fall of biodiversity in species. Regulators designate endangered species by their identified populations and reserve land where they identify the endangered. Governments appraise the success of preservation in the currency of species. Inspectors define quarantines in identified species. Biologists carry the weight of these consequences as they select an exact name from almost two million known species names or conjecture that a specimen may belong to one of millions more unknown species. Written as a sequence of four discrete nucleotides—CATG—along a uniform locality on a genome, a barcode of life provides a “digital” identifying feature, supplementing the more analog gradations of shapes, colors, and behaviors. A library of digital barcodes will provide an unambiguous reference that will facilitate identifying species invading and retreating across the globe and through centuries. Making a difficult task harder, many species metamorphose into different forms as they cycle through stages in their lives. Eggs may become caterpillars and caterpillars become butterflies but, of course, all remain the same species carrying the same genes. Different species may resemble one another or be too small to distinguish easily but each carries different alleles and thus barcodes, which can unmask their identity. Furthermore, an inspector of unloaded cargo on a dock or an analyst of the remains of diets in a stomach may be called to identify species from only a snippet, a hair, or a fin. The fragment may be unrecognizable, but it will faithfully carry the identifying barcode of the source. Since Carl Linnaeus (1707–1778) developed systematic naming, ranking, and classifying of organisms, biologists have produced master keys to all knowledge about a species in the form of binomial names. Biologists use distinguishing features, such as shape, color, or number of legs in taxonomic keys first to assign binomials, like Homo sapiens, and then to associate the names of the organisms with biological knowledge about the species and its relatives. Of course, the bank of names suffers some problems, such as when several names are applied to one species [1]. And, biologists continuously debate criteria for species. The diversity of life from bacteria to whales renders any single rule inadequate for defining all species. Nevertheless a few basic criteria, such as that distinct species do not interbreed and meld their genetic sequences, serve for many groups.
v
vi
Foreword
Since Charles Darwin (1809–1882) proposed a branching pattern of evolution in On the Origin of Species, biologists have sought to arrange a phylogenetic system of species on an evolutionary tree of life. A tree of life illustrates every introductory biology text. Barcoding will reveal whether a newly collected specimen belongs to a species already on the tree. Or if a specimen is a truly new species, barcoding will help place it as a new leaf among known species on the proper branch of the tree of life. Whatever the criteria for defining and recognizing species, their inheritance and their genes must differ to maintain species distinctions generation after generation. Since the molecular discoveries of the mid-twentieth century, genes intimate a code comprising sequences of the four nucleotides that constitute DNA. Even before the barcoding movement now embodied in the 200 member organizations from 50 countries of the Consortium for the Barcode of Life (CBOL), scientific revisions of species boundaries included DNA analysis, and the ability to distinguish new species included DNA divergences. The product barcode analogy leant impetus to the continuing matching of species and genetic differences. Commercial barcodes must be uniform across shelves and warehouses. For animals, concentration on the single segment of the mitochondrial COI gene across the far wider shelves of life imparted the necessary uniformity to avoid a Tower of Babel. Conceiving the series of nucleotides CATG as bars and their presence and order as digital bars opened the door to rapid and unambiguous connection of specimens. Instead of connecting biological specimens to shelves and suppliers, the DNA barcode of life connects them to curated collections in museums and herbaria, lifting their utility. It would also connect specimens to the biological literature of binomial names. DNA barcodes offer a globally consistent way to propose provisional or candidate species that experts have not yet honored with a full description and binomial name. Worries at first evoked by DNA barcoding have not been realized. It has heightened the nuance of the species concept, not diminished it. It has widened humanity’s view of diversity, not reduced diversity to ciphers. It has excited wonder at the knowledge hard-won through earlier techniques and accessible through the master key of binomial names. It has enhanced the need for systematists to match the flood of barcodes with a sound array of binomial names. Barcoding is not a mere slogan and an inadequate analogy. It is a now proven tool for understanding biodiversity. Recurring to the need for uniformity to avoid a Tower of Babel, the choice of a segment of the mitochondrial COI gene has excelled for almost all animal taxa. This barcode region meets four basic specifications: the locality must be present in all barcoded species; it must be shaved as short as possible; the locality must have sequences stable within a species through many generations; and it must nevertheless have sequences variable enough to distinguish species. As this book reports, botanists have now also found barcode regions that are proving successful from carrots and chamomile to oats and pines. Fungal barcodes are not far behind. Some observers do ask a single, searching question about the barcode of life arriving in environmental science: When will it be small, cheap, and convenient enough for nonexperts, even children? In particular, when will the needed equipment shrink to the size of a laptop or a handheld barcoder? In fact, even today the key machines have shrunk until they fit comfortably on a desk or tabletop. The analogy of the newly hired clerk faultlessly pricing the cart of goods suggests the ability to make taxonomic expertise go further, and very far if a handheld barcoder were present. Clues that such a goal will be achieved lie in reports of students detecting endangered marine species on sale in supermarkets, identifying insect traces in their homes, and
Foreword
vii
analyzing tea leaves with inexpensive equipment. As well as enabling specialized scientists to do more and lift the value of specimen collections, barcoding promises to enable laymen to appreciate the diversity of life. The array of opportunities offered by DNA barcodes must rest on a sound foundation of binomial names with associated, vouchered, and identified specimens—housed in readily accessible museum collections. A sound foundation of binomials based on new and existing natural history collections stands as the first priority for the success of DNA barcodes. Fortunately, the Global Names Architecture project associated with the Encyclopedia of Life has already amassed 19 million common and scientific names and is reconciling them for the two million or so species estimated to be known already. Within 5 years, we could celebrate the achievement of the international Barcode of Life (iBOL) project: access to the barcodes of an array of five million specimens sequenced from 500,000 species. Voucher specimens, which are prepared, curated, databased, often digitally imaged, and stored in natural history collections, will support this effort. Already, in just a handful of years, the DNA barcode of life database (www.boldsystems.org) has soared above 1.2 million specimens from about 150,000 species. Already, as the chapters in this book show, the library of barcodes linked to names and curated specimens is multiplying the knowledge of a marine ecologist about a reef, the quality of surveillance for invasive species, and the accuracy of labeling of food products. Such successes will motivate and sustain the further building of the reference library of barcodes and the removal of obstacles for its quick, frugal realization and use. Our vision, first inspired by a barcode wand in the hand of a supermarket clerk, is comparable magic for an ichthyologist on a research vessel with featureless fish larvae, a child on a woodland trail, or an inspector at a port infallibly identifying a species. Reading this book, we learn that science can make magic. New York, NY, USA
Jesse H. Ausubel Alfred P. Sloan Foundation
Reference 1. Patterson DJ, Cooper J, Kirk PM, Pyle RL, Remsen DP (2010) Names are key to the big new biology. Trends Ecol Evol 25:686–691.
Preface The use of a universally accepted short DNA sequence for identification of species has been proposed for application across all forms of life. Such a “DNA barcode,” a term first coined less than a decade before the publication of the present book, in its simplest definition is one or more short gene sequences (<700 base pairs) taken from a standardized portion of the genome that are used to identify species through reference to DNA sequence libraries or databases. DNA Barcodes: Methods and Protocols is a compendium of the latest information on generating, applying, and analyzing DNA barcodes across the Tree of Life, including animals, fungi, protists, algae, and plants. The volume is divided into five major sections: I. Introduction; II. DNA Barcodes for the Tree of Life; III. Generating DNA Barcode Data; IV. Applications of DNA Barcode Data; and V. Case Studies on DNA Barcodes. In preparing the volume, we recognized that DNA barcoding is much more than the sequencing of one or two genes from an organism. The endeavor has come to encompass many elements, from campaigns that provide a deterministic framework for how to build specimen libraries, to the bioinformatic systems needed to track the many samples, sequences, and meta-data that are linked to each individual. Our ability to apply DNA barcode data in diverse contexts is also critical, for just as a library of books is not useful without those who would apply the knowledge contained therein, so it is true that in applying DNA barcode data we fulfill its promise. To that end, this volume is intended as a roadmap, linking methods ranging from standard wet-lab methods, to methods of bioinformatics, statistical and ecological analysis and methods to guide future, large-scale collections campaigns. In the Introductory Section, background material is provided on the rationale for the use of DNA barcodes as well as a short history of the development of the concept of DNA barcoding to the different domains of life. In Section II, detailed protocols and methodologies for barcoding various types of organisms are presented. Although the field of barcoding is still in its infancy, specific methodologies have now been developed for organisms across the Tree of Life, and these chapters describe the most successful methods employed thus far. Although some of these protocols are still evolving, some have become more or less standard for particular taxonomic groups. Section III covers more broadly applicable topics that apply to barcoding any type of organism, such as sample acquisition and archiving, laboratory tracking of tissues and sequences, DNA extraction and amplification, using “mini-barcodes” for samples with degraded DNA, and generating barcodes with next-generation sequencing technology. In addition to these chapters on specific laboratory methodologies, Section IV is devoted to the applications of DNA barcodes in the fields of systematics, phylogeny, and community ecology. These chapters focus on analytic methods that in many cases are still in their infancy of development, but will be critical for those biologists who want to go beyond generating sequences for particular taxa and actually apply DNA barcodes to answer specific
ix
x
Preface
questions in ecology and evolution. Topics include evaluating the efficacy of DNA barcodes, species discovery using DNA barcodes, constructing phylogenetic trees using DNA barcode sequence data, and applying such phylogenies to understanding test hypotheses concerning the assembly of species into communities. In order to better understand how barcodes can be applied across specific taxonomic groups or to specific ecological situations, Section V provides two cases studies of ongoing, large-scale campaigns. The first case is a worldwide initiative to barcode the fishes of the world and the second example applies DNA barcoding to all tree species is represented in a worldwide network of forest dynamics plots (CTFS) as a tool for understanding community evolution an ecological forensics. DNA barcoding is a new and powerful basic research tool with exceptional potential for the incorporation of new technologies and for future applications. The volume closes with a vision by the Editors on the future of DNA barcoding. This book should be of benefit and interest to all biologists and technicians interested in the relevance and application of molecular biology and DNA sequencing to identification, taxonomy, evolution, and ecology. We would like to thank all of the authors of the chapters included in this book for opening up their laboratories for all readers to see how their protocols were developed and how they work to generate and analyze DNA barcodes. All of the contributors to this volume recognize that DNA barcoding is a rapidly changing field and that new methods are being proposed almost on a monthly basis and we thank them for sharing their most up-to-date information. We all hope that the methods and protocols contained herein will be helpful in advancing these efforts. Washington, DC, USA
W. John Kress David L. Erickson
Contents Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PART I
INTRODUCTION
1 DNA Barcodes: Methods and Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W. John Kress and David L. Erickson
PART II
3
DNA BARCODES FOR THE TREE OF LIFE
2 Introduction to Animal DNA Barcoding Protocols . . . . . . . . . . . . . . . . . . . . . . . . Lee A. Weigt, Amy C. Driskell, Andrea Ormos, Christopher Meyer, and Allen Collins 3 DNA Barcodes for Insects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . John James Wilson 4 DNA Barcoding Methods for Invertebrates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nathaniel Evans and Gustav Paulay 5 DNA Barcoding Amphibians and Reptiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Miguel Vences, Zoltán T. Nagy, Gontran Sonet, and Erik Verheyen 6 DNA Barcoding Fishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lee A. Weigt, Amy C. Driskell, Carole C. Baldwin, and Andrea Ormos 7 DNA Barcoding Birds: From Field Collection to Data Analysis . . . . . . . . . . . . . . . Darío A. Lijtmaer, Kevin C.R. Kerr, Mark Y. Stoeckle, and Pablo L. Tubaro 8 DNA Barcoding in Mammals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Natalia V. Ivanova, Elizabeth L. Clare, and Alex V. Borisenko 9 Methods for DNA Barcoding of Fungi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ursula Eberhardt 10 Methods for DNA Barcoding Photosynthetic Protists Emphasizing the Macroalgae and Diatoms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gary W. Saunders and Daniel C. McDevit 11 DNA Barcoding Methods for Land Plants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aron J. Fazekas, Maria L. Kuzmina, Steven G. Newmaster, and Peter M. Hollingsworth
PART III
v ix xiii
11
17 47 79 109 127 153 183
207 223
GENERATING DNA BARCODE DATA
12 Field Information Management Systems for DNA Barcoding . . . . . . . . . . . . . . . . John Deck, Joyce Gross, Steven Stones-Havas, Neil Davies, Rebecca Shapley, and Christopher Meyer
xi
255
xii
Contents
13 Laboratory Information Management Systems for DNA Barcoding. . . . . . . . . . . . Meaghan Parker, Steven Stones-Havas, Craig Starger, and Christopher Meyer 14 DNA Extraction, Preservation, and Amplification . . . . . . . . . . . . . . . . . . . . . . . . . Thomas Knebelsberger and Isabella Stöger 15 DNA Mini-barcodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mehrdad Hajibabaei and Charly McKenna 16 Ways to Mix Multiple PCR Amplicons into Single 454 Run for DNA Barcoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ryuji J. Machida and Nancy Knowlton
PART IV
311 339
355
APPLICATIONS OF DNA BARCODE DATA
17 The Practical Evaluation of DNA Barcode Efficacy . . . . . . . . . . . . . . . . . . . . . . . . John L. Spouge and Leonardo Mariño-Ramírez 18 Plant DNA Barcodes, Taxonomic Management, and Species Discovery in Tropical Forests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Christopher W. Dick and Campbell O. Webb 19 Construction and Analysis of Phylogenetic Trees Using DNA Barcode Data . . . . . David L. Erickson and Amy C. Driskell 20 Phylogenetic Analyses of Ecological Communities Using DNA Barcode Data . . . . Nathan G. Swenson
PART V
269
365
379 395 409
CASE STUDIES USING DNA BARCODES
21 FISH-BOL, A Case Study for DNA Barcodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert D. Ward 22 Generating Plant DNA Barcodes for Trees in Long-Term Forest Dynamics Plots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W. John Kress, Ida C. Lopez, and David L. Erickson 23 Future Directions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . David L. Erickson and W. John Kress
423
441
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
467
459
Contributors JESSE H. AUSUBEL • Program for the Human Environment, The Rockefeller University, New York, NY, USA CAROLE C. BALDWIN • Department of Vertebrate Zoology, National Museum of Natural History, Smithsonian Institution, Washington, DC, USA ALEX V. BORISENKO • Biodiversity Institute of Ontario & Integrative Biology, University of Guelph, Guelph, ON, Canada ALLEN COLLINS • Department of Invertebrate Zoology, Smithsonian Institution, NMNH, Washington, DC, USA ELIZABETH L. CLARE • Biodiversity Institute of Ontario & Integrative Biology, University of Guelph, Guelph, ON, Canada NEIL DAVIES • Berkeley Natural History Museums, University of California at Berkeley, Berkeley, CA, USA JOHN DECK • Berkeley Natural History Museums, University of California at Berkeley, Berkeley, CA, USA CHRISTOPHER W. DICK • Department of Ecology and Evolutionary Biology and Herbarium, University of Michigan, Ann Arbor, MI, USA AMY C. DRISKELL • Laboratories of Analytical Biology, Smithsonian Institution, NMNH, Suitland, MD, USA URSULA EBERHARDT • CBS-KNAW Fungal Biodiversity Centre, Centraalbureau voor Schimmelcultures, Utrecht, The Netherlands DAVID L. ERICKSON • Department of Botany, Smithsonian Institution, National Museum of Natural History, Washington, DC, USA NATHANIEL EVANS • Florida Museum of Natural History, University of Florida, Gainesville, FL, USA ARON J. FAZEKAS • Department of Integrative Biology, University of Guelph, Guelph, ON, Canada JOYCE GROSS • Berkeley Natural History Museums, University of California at Berkeley, Berkeley, CA, USA MEHRDAD HAJIBABAEI • Biodiversity Institute of Ontario & Integrative Biology, University of Guelph, Guelph, ON, Canada PETER M. HOLLINGSWORTH • Royal Botanic Garden Edinburgh, Edinburgh, UK NATALIA V. IVANOVA • Biodiversity Institute of Ontario & Integrative Biology, University of Guelph, Guelph, ON, Canada KEVIN C.R. KERR • Department of Natural History, Royal Ontario Museum, Toronto, ON, Canada THOMAS KNEBELSBERGER • Senckenberg Research Institute, German Centre for Marine Biodiversity Research (DZMB), Wilhelmshaven, Germany NANCY KNOWLTON • Department of Invertebrate Zoology, Smithsonian Institution, National Museum of Natural History, Washington, DC, USA
xiii
xiv
Contributors
W. JOHN KRESS • Department of Botany, Smithsonian Institution, National Museum of Natural History, Washington, DC, USA MARIA L. KUZMINA • Biodiversity Institute of Ontario & Integrative Biology, University of Guelph, Guelph, ON, Canada DARÍO A. LIJTMAER • Ornithology, “Bernardino Rivadavia”, Buenos Aires, Argentina IDA C. LOPEZ • Department of Botany, Smithsonian Institution, National Museum of Natural History, Washington, DC, USA RYUJI J. MACHIDA • Department of Invertebrate Zoology, Smithsonian Institution, National Museum of Natural History, Washington, DC, USA LEONARDO MARIÑO-RAMÍREZ • National Center for Biotechnology Information, National Library of Medicine, National Institutes of Health, Bethesda, MD, USA DANIEL C. MCDEVIT • Department of Biology, Centre for Environmental & Molecular Algal Research, University of New Brunswick, Fredericton, NB, Canada CHARLY MCKENNA • Department of Integrative Biology and Biodiversity Institute of Ontario,, University of Guelph, Guelph, ON, Canada CHRISTOPHER MEYER • Department of Invertebrate Zoology, MRC-163, National Museum of Natural History, Smithsonian Institution, Washington, DC, USA ZOLTÁN T. NAGY • Royal Belgian Institute of Natural Sciences, Joint Experimental Molecular Unit, Brussels, Belgium STEVEN G. NEWMASTER • Department of Integrative Biology, University of Guelph, Guelph, ON, Canada ANDREA ORMOS • Laboratories of Analytical Biology, Smithsonian Institution, NMNH, Suitland, MD, USA MEAGHAN PARKER • Department of Invertebrate Zoology, MRC-163, Smithsonian Institution, National Museum of Natural History, Washington, DC, USA GUSTAV PAULAY • Florida Museum of Natural History, University of Florida, Gainesville, FL, USA GARY W. SAUNDERS • Department of Biology, Centre for Environmental & Molecular Algal Research, University of New Brunswick, Fredericton, NB, Canada REBECCA SHAPLEY • Structured Data Group, Google Research, Google Inc., Mountain View, CA, USA GONTRAN SONET • Royal Belgian Institute of Natural Sciences, Joint Experimental Molecular Unit, Brussels, Belgium JOHN L. SPOUGE • National Center for Biotechnology Information, National Library of Medicine, National Institutes of Health, Bethesda, MD, USA CRAIG STARGER • Department of Invertebrate Zoology, MRC-163, Smithsonian Institution, National Museum of Natural History, Washington, DC, USA MARK Y. STOECKLE • The Rockefeller University, New York, NY, USA ISABELLA STÖGER • Bavarian State Collection of Zoology (ZSM), Munich, Germany STEVEN STONES-HAVAS • BioMatters Ltd., Auckland, New Zealand NATHAN G. SWENSON • Department of Plant Biology, Michigan State University, East Lansing, MI, USA PABLO L. TUBARO • Ornithology, “Bernardino Rivadavia”, Buenos Aires, Argentina MIGUEL VENCES • Division of Evolutionary Biology Zoological Institute, Technical University of Braunschweig, Braunschweig, Germany
Contributors
xv
ERIK VERHEYEN • Royal Belgian Institute of Natural Sciences, Vertebrate department, Brussels, Belgium ROBERT D. WARD • Wealth from Oceans Flagship, CSIRO Marine and Atmospheric Research, Tasmania, Australia CAMPBELL O. WEBB • Arnold Arboretum of Harvard University, Cambridge, MA, USA LEE A. WEIGT • Laboratories of Analytical Biology, Smithsonian Institution, NMNH, Suitland, MD, USA JOHN JAMES WILSON • Biodiversity Institute of Ontario, University of Guelph, Guelph, ON, Canada
Part I Introduction
Chapter 1 DNA Barcodes: Methods and Protocols W. John Kress and David L. Erickson Abstract DNA barcoding, a new method for the quick identification of any species based on extracting a DNA sequence from a tiny tissue sample of any organism, is now being applied to taxa across the tree of life. As a research tool for taxonomists, DNA barcoding assists in identification by expanding the ability to diagnose species by including all life history stages of an organism. As a biodiversity discovery tool, DNA barcoding helps to flag species that are potentially new to science. As a biological tool, DNA barcoding is being used to address fundamental ecological and evolutionary questions, such as how species in plant communities are assembled. The process of DNA barcoding entails two basic steps: (1) building the DNA barcode library of known species and (2) matching the barcode sequence of the unknown sample against the barcode library for identification. Although DNA barcoding as a methodology has been in use for less than a decade, it has grown exponentially in terms of the number of sequences generated as barcodes as well as its applications. This volume provides the latest information on generating, applying, and analyzing DNA barcodes across the Tree of Life from animals and fungi to protists, algae, and plants. Key words: DNA barcode, Identification, Taxonomy, Discovery, Ecology, Evolution
1. What Is DNA Barcoding? The taxonomic impediment that exists today for many systematists, field ecologists, and evolutionary biologists, i.e., determining the correct identification for any plant or animal sample in a rapid, repeatable, and reliable fashion, is a reality we all must accept (1). This taxonomic problem was a major reason for the development of a new method for the quick identification of any species based on extracting a DNA sequence from a tiny tissue sample of any organism. Appropriately called “DNA barcoding,” referring to the UPC labels one finds on commercial products, DNA barcodes consist of a standardized short sequence of DNA between 400 and 800 bp long that, in theory, can be easily isolated and characterized for all species on the planet (2, 3). By harnessing advances W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_1, © Springer Science+Business Media, LLC 2012
3
4
W.J. Kress and D.L. Erickson
in molecular genetics, sequencing technology, and bioinformatics, DNA barcoding is allowing users to quickly and accurately recognize known species and retrieve information about them. It also has the potential to speed the discovery of the thousands of species yet to be named. DNA barcoding has become a vital new tool for taxonomists who are charged with the inventory and management of the Earth’s immense and changing biodiversity (4). A DNA barcode, in its simplest definition, is one or more short gene sequences taken from a standardized portion of the genome used to identify species. The use of such short DNA sequences for biological identifications was first proposed by Paul Hebert and colleagues (2, 5) with the ultimate goal of quick and reliable species-level identifications across all forms of life, including animals, plants, and microorganisms. The concept of a universally recoverable segment of DNA that can be applied as an identification marker across species was initially applied to animals (5). However, a standard DNA barcode locus for plants was not accepted by the botanical community until 6 years after Hebert published his first paper on barcoding animals. After several broad screenings of gene regions in the plant genome (e.g., refs. 6–10), three plastid (rbcL, matK, and trnH-psbA) and one nuclear (ITS) gene regions have become the standard barcode of choice in most applications for plants and fungi (11–13).
2. The Uses of DNA Barcoding From its inception the primary use of DNA barcodes has been for species identification. As a research tool for taxonomists, barcoding assists in identification by expanding the ability to diagnose species by including all life history stages of an organism (e.g., seeds, seedlings, eggs, larvae, mature individuals both fertile and sterile), unisexual species, damaged specimens, gut contents, scats, and fecal samples. In addition systematists have the potential to quantify the consistency of their species definitions with a universal measure of genetic variability based on the barcode sequence data. For the applied users of taxonomy, barcoding is a tool to identify regulated species, including invasive and endangered species, as well as to test the identity and purity of biological products, such as seafood, herbal medicines, and dietary supplements. As a biodiversity discovery tool, barcoding helps to flag species that are potentially new to science, especially undescribed and cryptic species (see ref. 14). DNA barcodes are now also being used to address fundamental ecological and evolutionary questions, such as how species in plant communities are assembled (12, 15) and the degree of specialization in tropical versus temperate zone herbivores (e.g., ref. 16; see below).
1
DNA Barcodes: Methods and Protocols
5
It was not a coincidence that DNA barcoding developed in concert with genomics-based investigations in the first decade of the twenty-first century (17). DNA barcoding (a rapid tool for species identification based on DNA sequences) and genomics (a broad-based comparative approach to entire genome structure and expression) share an emphasis on large scale genetic data acquisition that offers new answers to questions previously beyond the reach of traditional disciplines. DNA barcodes, which in principle will eventually be generated and characterized for all species on the planet, are intended to be stored in an online digital library of sequences for matching and recognizing unidentified biological samples. Genomics has accelerated the process of recognizing novel genes and gene function through the comparisons of vast amounts of sequence data of the entire genomes of a limited number of taxa. In other words, the aim of DNA barcoding is to utilize the information of ONE OR A FEW gene regions to identify ALL species of life whereas genomics, the inverse of barcoding, describes in ONE OR A FEW (but eventually many) selected species the function and interactions across ALL genes. All other types of DNA sequence-based investigations of organisms, including population genetics and phylogenetics, fall between these two ends of the DNA spectrum.
3. DNA Barcoding Methods in Brief The process of DNA barcoding entails two basic steps: (1) building the barcode library of known species and (2) matching, or assigning the barcode sequence of the unknown sample against the barcode library for identification. The first step requires taxonomic expertise in selecting one or preferably several individuals per species to serve as reference samples in the barcode library. All taxonomists should generate DNA barcodes for the taxa in their monographs or at the least they should deposit verified DNA samples with their associated voucher specimens in core DNA barcode institutions. Tissue samples that yield high-quality DNA extractions in some cases can be obtained from specimens already housed in museum collections and herbaria. However, in most cases new tissues will be taken directly from live specimens in the field before they are prepared, labeled, and stored as voucher specimens in museum collections. These vouchers then serve as the permanent record that connects the DNA barcode to a particular species of plant, fungus, or animal. Once the reference barcode library is complete for the organisms under study, whether they comprise a geographic region, a taxonomic group, or a target assemblage (e.g., medicinal plants, timber trees, etc.), then the DNA barcodes generated for the
6
W.J. Kress and D.L. Erickson
unidentified samples are compared to the known barcodes using some type of matching algorithm. Most practical algorithms for species assignment start by comparing two DNA sequences to produce a distance measure between the sequences. In DNA barcoding, a sequence alignment algorithm is usually employed to assign an unknown sample to a known species by finding the closest database sequence to the sample sequence (18). Basic local alignment search tool (BLAST) is a matching tool that is provided through GenBank to search for correspondence between a query sequence and a sequence library. Two additional commonly used distance measures are the Kimura-2-Parameter Distance and the Smith– Waterman Algorithm (similar to BLAST) for Local Alignment Similarity (see ref. 19). For many users of DNA barcodes, the process ends after the unknown sample is correctly identified. However, barcodes can also be applied as tools for answering fundamental biological questions, such as how species are assembled into communities. This aspect of DNA barcoding has only recently been considered, but offers some of the most exciting prospects for using this new taxonomic tool.
4. A Short History of DNA Barcoding To be practical as a DNA barcode, a gene region must satisfy three criteria: (1) contain significant species-level genetic variability and divergence, (2) possess conserved flanking sites for developing universal PCR primers for the widest taxonomic application, and (3) be of appropriate sequence length so as to facilitate current capabilities of DNA extraction and sequencing. A fourth criterion for a successful DNA barcode relates to sequence quality and has been proposed by some as an important consideration (see CBOL Plant Working Group 2009). A short DNA sequence of 600 bp in the mitochondrial gene for cytochrome c oxidase subunit 1 (CO1; 2) generally fits these criteria and was accepted early on as a practical, standardized species-level barcode for many animals (see http://www.barcoding.si.edu/). The inability of CO1 to work as a barcode in plants and fungi (6, 8) required that botanists find a more appropriate marker. A number of candidate gene regions were immediately suggested as possible barcodes for plants (e.g. refs. 6, 7, 9, 10, 20, 21), but until 2009 none were universally accepted by the plant taxonomic community. This lack of consensus was in most part due to the limitations inherent in a plastid marker (i.e., low sequence variability) relative to CO1. In 2008, The Consortium for the Barcode of Life Plant Working Group convened a lengthy discussion on selecting an appropriate plant barcode and eventually published a paper (11) in which the largest
1
DNA Barcodes: Methods and Protocols
7
number of candidate barcode markers with the largest set of data were evaluated. Their results identified three markers that have become the most widely used barcode loci today: rbcL, matK, and trnH-psbA. Two, rbcL and matK, were identified as the core barcode loci and the third, trnH-psbA, was designated as an important supplementary marker to be further tested and used in appropriate cases. Some research groups continue to advocate additional markers for plants, such as ITS, for specific purposes or specific taxa.
5. What This Book Is About DNA Barcodes: Methods and Protocols provides the latest information on generating, applying, and analyzing DNA barcodes across the Tree of Life from animals and fungi to protists, algae, and plants. Background material is provided on the rationale for the use of DNA barcodes as well as detailed protocols and methodologies for barcoding various types of organisms. Topics include sample acquisition and archiving, laboratory tracking of tissues and sequences, sequencing protocols, data analyses, and informatics as well as case studies of particular taxonomic groups and DNA barcoding campaigns. In addition to these chapters on specific laboratory methodologies, information on the applications of DNA barcodes in the fields of systematics, phylogeny, and community ecology are provided for those who want to go beyond generating sequences for particular taxonomic groups. DNA barcoding is a new and powerful basic research tool with exceptional potential for the incorporation of new technologies and for future applications. This book should be of benefit and interest to all biologists and technicians interested in the relevance and application of molecular biology and DNA sequencing to identification, taxonomy, evolution, and ecology. References 1. Janzen DH (2005) Foreword: how to conserve wild plants? Give the world the power to read them. In: Krupnick GA, Kress WJ (eds) Plant conservation: a natural history approach. University of Chicago Press, Chicago, pp ix–xiii 2. Hebert PDN, Cywinska A, Ball SL, deWaard JR (2003) Biological identifications through DNA barcodes. Proc R Soc B 270:313–321. doi:10.1098/rspb.2002.2218 3. Savolainen V, Cowan RS, Vogler AP et al (2005) Towards writing the encyclopedia of life: an introduction to DNA barcoding. Philos Trans Ser B 360:1850–1811. doi:10.1098/ rstb.2005.1730
4. Cowan RS, Chase MW, Kress WJ, Savolainen V (2006) 300,000 species to identify: problems, progress, and prospects in DNA barcoding of land plants. Taxon 55:611–616 5. Hebert PDN, Stoeckle MY, Zemlak TS, Francis CM (2004) Identification of birds through DNA barcodes. PLoS Biol 2:e312. doi:10.1371/journal.pbio.0020312 6. Kress WJ, Wurdack KJ, Zimmer EA et al (2005) Use of DNA barcodes to identify flowering plants. Proc Natl Acad Sci USA 102: 8369–8374 7. Kress WJ, Erickson DL (2007) A two-locus global DNA barcode for land plants: the
8
W.J. Kress and D.L. Erickson
8.
9.
10.
11.
12.
13.
14.
coding rbcL gene complements the non-coding trnH-psbA spacer region. PLoS One 2:e508. doi:10.1371/journal.pone.0000508 Chase MW, Salamin N, Wilkinson M et al (2005) Land plants and DNA barcodes: shortterm and long-term goals. Philos Trans R Soc Lond B Biol Sci 360:1889–1895. doi:10.1098/ rstb.2005.1720 Newmaster SG, Fazekas AJ, Steeves RAD, Janovec J (2008) Testing candidate plant barcode regions in the Myristicaceae. Mol Ecol Resour 8:480–490 Lahaye R, Van der Bank M, Bogarin D, Warner J et al (2008) DNA barcoding the floras of biodiversity hotspots. Proc Natl Acad Sci USA 105:2923–2928 CBOL Plant Working Group (2009) A DNA barcode for land plants. Proc Natl Acad Sci 106:12794–12797 Kress WJ, Erickson DL, Jones FA, Swenson NG, Perez R, Sanjur O, Bermingham E (2009) Plant DNA barcodes and a community phylogeny of a tropical forest dynamics plot in Panama. Proc Natl Acad Sci USA 106:18621–18626. d o i : w w w. p n a s . o rg / c g i / d o i / 1 0 . 1 0 7 3 / pnas.0909820106 Schoch CL, Seifert KA, Huhndorf S, Robert V, Spouge JA, et al. (2012) Nuclear ribosomal internal transcribed spacer (ITS) region as a universal DNA barcode marker for Fungi. Proc Natl Acad Sci USA 109:6241–6246 Hebert PDN, Penton EH, Burns JM et al (2004) Ten species in one: DNA barcoding
15.
16.
17.
18.
19.
20.
21.
reveals cryptic species in the neotropical skipper butterfly Astraptes fulgerator. Proc Natl Acad Sci USA 101:14812–14817. doi:10.1073/ pnas.0406166101 Kress WJ, Erickson DL, Swenson NG et al (2010) Advances in the use of DNA barcodes to build a community phylogeny for tropical trees in a Puerto Rican forest dynamics plot. PLoS One 5:e15409. doi:10.1371/journal. pone.0015409 Jurado-Rivera JA et al (2009) DNA barcoding insect-host plant associations. Proc R Soc Lond B Biol Sci 276:639–648 Kress WJ, Erickson DL (2008) Commentary DNA barcoding: genes, genomics, and bioinformatics. Proc Natl Acad Sci USA 105: 2761–2762 Ratnasingham S, Hebert PDN (2007) BOLD: The barcode of life data system (www.barcoding life.org). Mol Ecol Notes 7:355–364 Erickson DL, Spouge J, Resch A et al (2008) DNA barcoding in land plants: developing standards to quantify and maximize success. Taxon 57:1304–1316 Taberlet P, Coissac E, Pompanon F et al (2007) Power and limitations of the chloroplast trnL (UAA) intron for plant DNA barcoding. Nucleic Acids Res 35:e14. doi:10.1093/nar/ gkl938 Chase MW, Cowan RS, Hollingsworth PM et al (2007) A proposal for a standardised protocol to barcode all land plants. Taxon 56: 295–299
Part II DNA Barcodes for the Tree of Life
Chapter 2 Introduction to Animal DNA Barcoding Protocols Lee A. Weigt, Amy C. Driskell, Andrea Ormos, Christopher Meyer, and Allen Collins Abstract Procedures and protocols common to many DNA barcoding projects are summarized. Planning for any project should emphasize front-end procedures, especially the “genetic lockdown” of collected materials for downstream genetic procedures. Steps further into the DNA barcoding process chain, such as sequencing, data processing, and other back-end functions vary slightly, if at all, among projects and are presented elsewhere in the volume. Point-of-collection sample and tissue handling and data/metadata handling are stressed. Specific predictions of the future workflows and mechanics of DNA barcoding are difficult, so focus is on that which most or all future methods and technologies will surely share. Key words: DNA barcoding, Animals, ATBI, Genetic preservation
1. Introduction The Smithsonian’s LAB, part of the National Museum of Natural History, in partnership with scientists from our own museum and around the world, have generated DNA barcodes from 22 of the 32 recognized phyla of animals (1–8). We have been actively heading the Leading Labs Network of the Consortium for the Barcode of Life (CBOL) and are participating in multiple DNA barcoding campaigns. These efforts have afforded us the opportunity to be heavily involved in all aspects of DNA barcoding for many different groups of organisms—from sample collection in the field, through lab processes and data analysis, to publication. We work on projects that range from a few to thousands of specimens and on projects taking environmental sampling approaches. When we started this work, we were frustrated by the numerous inefficiencies in all steps of the process, from field collections to database submission. We have invested much effort in an attempt to make things less cumbersome— simplifying or eliminating renaming photographs, minimizing the W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_2, © Springer Science+Business Media, LLC 2012
11
12
L.A. Weigt et al.
number of times a specimen is handled, developing field notebook to lab notebook to final database interconnectivity, and improving lab processes and monitoring. Redundant efforts take time and money and introduce opportunities for human error. We have worked to avoid or eliminate many of these from our barcoding pipeline. After all—how many times do you want to type and retype (accurately) the scientific name of the scrawled cowfish (Acanthostracion quadricornis) or repeatedly try to find the correct well in a 384-well plate with a single pipet tip? Now that many DNA barcoding campaigns and large-scale projects are well underway, where are we, what have we learned, where are we going, and what advice do we need to heed going forward? Who could have predicted the technological fallout resulting from the genomic revolution? Where will we be in terms of biotechnology and the application of new instrumentation to biodiversity documentation in 10 or 20 years? Even attempting to answer some of these questions promises to be a near-sighted or short-term effort at best. Our goal here is to present an overview of approaches with a view to the long-term. We want to emphasize aspects not only specific to the current methods, but that reflect our current best knowledge on how to enable future research, procedures, and techniques. In this light, the overall guiding principle of all efforts to acquire tissues should stress the critical nature of what we call “genetic lockdown”— stabilizing and securing the specimens, tissues, and DNA extracts for future genetic work as early as possible in the process chain and keeping them stable, secure, and safe from that point on. This will require different procedures in different collecting circumstances: preserving an entire specimen (or environmental sample) in such a way as to enable downstream DNA applications; or rough sorting and tissue subsampling in the field; or taking along an automated DNA extractor for on-site DNA extractions. Although new techniques for recovery of DNA from formalin-fixed and/or ethanol preserved specimens continue to be evaluated (9), most of these are limited in terms of amplicon size, success rates, and parts of the genome that are accessible, and they are not amenable to highthroughput methods. Therefore, they are to be avoided if better quality specimens can be obtained. Better quality specimens will also have greater future utility beyond present DNA barcoding methods. DNA extractions can be performed with many specific protocols highlighted in other chapters in this volume, but we indicate what to strive for in your method of choice, and point out strengths and weaknesses of various approaches. Subsequent to a high-quality, high molecular weight, archivalquality DNA extract free of secondary compounds and other PCR inhibitors, PCR for DNA barcoding for most animal groups follows very similar procedures. The primary difference is primer selection, and group-specific primers which enhance success for the
2
Introduction to Animal DNA Barcoding Protocols
13
barcoding of many animal groups are already available. We will present generalities, what we use as controls if primers are not working for your group, and provide some common primers and PCR optimization strategies. Once you have a successful PCR product (a clean, single-band of the target size), most animal processes converge onto a similar path—(1) purification of the PCR product; (2) cycle sequencing and subsequent reaction purification; (3) running the cleaned reaction product on an “automated sequencer” or genetic analyzer; (4) processing and quality control of the raw sequence data; (5) submission to databases and repositories. Therefore, we do not spend any time or space on these post-PCR steps. Finally, two nice resources: the first is the two-part manual put out in 2010 by ABC Taxa on protocols for All Taxa Biodiversity Inventories (10). It contains many chapters relevant to animal barcoding and includes chapters on all vertebrate groups, insects and canopy arthropods, soil and litter sampling, marine and continental freshwater habitats; the second is the Consortium for the Barcode of Life’s social network portal (http://connect. barcodeoflife.net/) that is a fantastic option to get assistance and information prior to setting out on a new project, or if you run into problems. This is your barcoding community resource, and should be a first avenue to seek guidance or answers. An abbreviated general Materials and Methods is presented; specifics should be found in the taxon-specific chapters.
2. Materials 2.1. Sample collection (a) Proper disposable or easily sterilized tools. (b) Proper individual storage containers for the organisms and tissues. (c) Data collection tools to handle specimens, tissues. (d) Photodocumentation materials (digital camera with appropriate lens(es), memory cards, backup hard drives). 2.2. Storage buffers (a) VPLN dewar or dry ice and cooler (see Note 1). (b) Salt solution (11). (c) EtOH—95% (nondenatured) (see Note 2). (d) Formalin or other voucher specimen preservation solution(s) (see Chapter 4 for specimen handling solutions and ref. 12).
14
L.A. Weigt et al.
2.3. Extraction components (see Note 3) (a) Lysis buffer for extraction method (see Note 4). (b) Proper plates, tubes or storage vessels (see Note 5). (c) When possible, on-site portable DNA extractor (see Note 6). 2.4. PCR components (a) PCR reaction ingredients and primers (see Note 7). (b) Positive control 16S or 18S primers (13). 2.5. Sequencing, data QC, and analysis—see other chapters in this volume.
3. Methods 3.1. Sample collection—methods will vary by taxonomic group and habitat. The EDIT ATBI volumes (10) are a great source of taxon and/or habitat specific methods as well as the chapters that follow. An excellent summary for marine invertebrates is provided in ref. 12 for relaxation, fixation, preservation as well as specific procedures by taxon; similar resources exist for many groups and can be found via networking with active research groups and labs. The primary goal should always be preserving the integrity of the DNA, and trying to maintain a high-quality voucher specimen. One without the other loses significant value. Photo documentation—for groups where it is necessary, living color patterns or morphology should be captured prior to tissue subsampling, if that will decrease the value of the image. However, some methods (i.e., fin painting with formalin) can degrade the DNA, so care should be taken to preserve the integrity of the genetic material. 3.2. Tissue subsampling—as soon as possible after collection (and potentially the death of the organism) the tissue subsampling needs to occur in order to stop the degradation process. There are many ways of accomplishing this, and many options for storage, transport, and DNA extraction, but the emphasis should always be to quickly stop degradation, then to create a high-quality, high molecular weight, archival DNA extract that will have maximal utility going forward. 3.3. DNA extraction methods—there are several alternatives for acceptable DNA extraction methods that yield a quality product from multiple sources and taxa that can be useful for decades to come. It is advisable to ensure, via preliminary experimentation on a few samples, that the methods work
2
Introduction to Animal DNA Barcoding Protocols
15
prior to destroying the tissues of new taxa for all the specimens on hand. 3.4. PCR methods—see Chapter 4 for a table of primers by taxon. 3.5. Sequencing, data QC, and analysis—see other chapters in this volume.
4. Notes 1. Freezing tissues is frequently optimal, sometimes difficult; vapor phase liquid nitrogen requires proper tanks and materials (−20°C storage for short term can be adequate). 2. 70% ethanol, denatured ethanol, and isopropanol should be avoided if possible because preservation and/or utility might be compromised. 3. It is advisable to pretest different extraction protocols for new taxonomic groups—different methods have different strengths and weaknesses when it comes to yield and to secondary compound and PCR inhibitor carryover. 4. We have found that putting tissues or minced tissues from many phyla directly into the M2 buffer of the Autogen prep protocol for transport back to the lab works well. 5. It is important to use proper seals to avoid well-to-well contamination during transport. One should be cognizant of contamination issues when transporting different vessel types with less than perfect sealing mechanisms—for example, sticky foil and sealing tapes are disastrous, and most of the plate sealers are insufficient—each well of the plate should be sealed independently. 6. When logistics or permits require, it is possible to extract DNA in 96-well plates at many field sites (as long as they have electricity) with instruments, such as the Qiagen BioSprint or Thermo KingFisher and a magnetic bead protocol. 7. Several taxonomic groups have benefited from PCR primer optimization or redesign. Some homework in NCBI’s BarStool, on BOLD and literature searches might yield primers that will increase PCR amplification success.
Acknowledgments All of us work with teams of taxonomists, field assistants, lab technicians, and colleagues in our own institution and departments as well as at numerous other institutions around the globe—this
16
L.A. Weigt et al.
chapter represents what those people have taught us and learned with us over the years and they share in the effort and credit but are too many to name. References 1. Dove CJ, Rotzel NC, Heacker M, Weigt LA (2008) Using DNA barcodes to identify bird species involved in birdstrikes. J Wildlife Manag 72:1231–1236 2. Kerr KCR, Stoeckle MY, Dove CJ, Weigt LA, Francis CM, Hebert PD (2007) Comprehensive DNA barcode coverage of North American birds. Mol Ecol Notes 7:535–543 3. Baldwin CC, Mounts JH, Smith DG, Weigt LA (2008) Genetic identification and color descriptions of early life-history stages of Belizean Phaeoptyx and Astrapogon (Teleostei: Apogonidae) with comments on identification of adult Phaeoptyx. Zootaxa 2008:1–22 4. Baldwin CC, Weigt LA, Smith DG, Mounts JH (2009) Reconciling genetic lineages with species in Western Atlantic Coryphopterus (Teleostei: Gobiidae). Smithson Contrib Mar Sci 38:111–138 5. Baldwin CC, CI Castillo, LA Weigt, BC Victor. (2011) Seven new species within western Atlantic Starksia atlantica, S. lepicoelia, and S. sluiteri (Teleostei: Labrisomidae), with comments on congruence of DNA barcodes and species. Zookeys 79:21–72 6. Tornabene L, Baldwin C, Weigt LA, Pezold F (2010) Exploring the diversity of Western Atlantic Bathygobius (Teleostei: Gobiidae) with cytochrome c oxidase-I, with descriptions of two new species. Aqua 16:141–170
7. Meyer CP, Paulay G (2005) DNA barcoding: error rates based on comprehensive sampling. PLoS Biol 3:e422 8. Plaisance L, Knowlton N, Paulay G, Meyer C (2009) Reef-associated crustacean fauna: biodiversity estimates using semi-quantitative sampling and DNA barcoding. Coral Reefs 28: 977–986 9. Palero F, Hall S, Clark PF, Johnston D, Mackenzie-Dodds J, Thatje S (2010) DNA extraction from formalin-fixed tissue: new light from the deep sea. Scientia Marina 74:465–470 10. Eymann J, Degreef J, Hauser C, Monje JC, Samyn Y, VandenSpiegel D (2010) Manual on field recording techniques and protocols for all taxa biodiversity inventories. ABC Taxa 8:653 11. Seutin G, White BN, Boag PT (1990) Preservation of avian blood and tissue samples for DNA analysis. Can J Zoo 69:82–90 12. Templado J, Paulay G, Gittenberger A, Meyer C (2010) Sampling the marine realm. Chapter 11 In: Eymann J, Degreef J, Hauser C et al (eds) Manual on field recording techniques and protocols for all taxa biodiversity inventories. vol 8 ABC Taxa (Belgium), pp 653 13. Simon C, Frati F, Beckenbach A et al (1994) Evolution, weighting, and phylogenetic utility of mitochondrial gene sequences and a compilation of conserved polymerase chain reaction primers. Ann Ento Soc Am 87:651–701
Chapter 3 DNA Barcodes for Insects John James Wilson Abstract DNA barcoding refers to the technique of sequencing a short fragment of the mitochondrial cytochrome c oxidase subunit I (COI) gene, the “DNA barcode,” from a taxonomically unknown specimen and performing comparisons with a reference library of barcodes of known species origin to establish a specieslevel identification. The library barcodes gain their value due to an intimate association—through the vouchered specimens from where they came—with other data; particularly Linnaean names, collection localities, and morphology in the form of digital images. Consequently, this chapter details means of efficiently obtaining barcodes along two general streams: rapid barcode assembly to populate the library and retrieval of barcodes from highly prized specimens, but also emphasizes organization and collection of the barcode collaterals. Key words: BOLD, Databasing, Tissue subsampling, DNA extraction, High-throughput, DNA amplification, Sequencing, Sequence editing, Sequence aligning, Cytochrome oxidase, DNA barcoding
1. Introduction The first task of DNA barcoding is the association of sequences with species names (1). These sequences, from “correctly” identified individuals, delineated with external information and classical morphological methods, are then incorporated into the reference barcode library—the Barcode of Life Datasystem (BOLD) (2). Campaigns charged with the goal of populating BOLD have embraced different approaches: large-scale regional inventories using freshly caught specimens (3, 4) or barcode “blitzes” of national parks (5) or museum collections (6). Sequence acquisition is the primary driver and consequently specimens may have “interim” taxonomic names (4). Alternative campaigns focus on
W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_3, © Springer Science+Business Media, LLC 2012
17
18
J.J. Wilson
providing “accurate” taxonomic names for sequences, e.g., Lepidoptera Barcode of Life: Sphingidae (7). These approaches do not truly represent a dichotomy, all have the same goal and often are combined (e.g., refs. 8–10); however, the diversity demonstrates a requirement for rapid, efficient, high-throughput laboratory methods to get from “field to fasta,” together with methods for important specimens such as types which may deserve more individualized analysis. Although the molecular methods in this chapter focus on generating library sequences, they can also be used by those wishing to use the library as an identification key. Through sequence comparisons, the reference library can be employed to identify unknown newly collected individuals to a species-level taxon. While much deliberation has surrounded the choice of particular criteria used during sequence comparison (11), DNA barcoding for identification to species is now relatively uncontroversial. This vision of DNA barcoding still requires the protracted process of traditional species description (12, 13) and growth of the library through generating barcodes for “known” species is ultimately restricted by what is already “known.” Another option is for barcoding to involve curation of the reference library though reciprocal illumination. Many studies document cases where species taxonomy was considerably and rapidly improved through the combination of DNA barcodes, morphological and ecological analyses and then swiftly incorporated back into an improved barcode reference library (e.g., ref. 9). We see the incorporation of “collateral” information in the library as vital to the success of the barcoding initiative. In fact, the connection of sequences (digital data easily transferred and analyzed) with other data (images, collection data, and historical taxonomy) is exactly what makes barcodes valuable communicators of biodiversity. Therefore our chapter provides protocols for the generation of the collaterals alongside generation of the sequences.
2. Materials 2.1. Specimen Collection
1. 99.9% Ethyl alcohol (Commercial Alcohols). Store in a flammable liquids cabinet.
2.2. Tissue Subsampling
1. ELIMINase® (Decon Labs Inc.™). 2. KimWipes (Kimberly–Clark Corporation). 3. Forceps (Fine Science Tools). 4. Microplate (Eppendorf). 5. Cap-strips (ABgene).
3
2.3. DNA Extraction and Lysis Buffers
DNA Barcodes for Insects
19
1. 0.5 M EDTA pH 8.0: 186.1 g EDTA (Fisher Scientific®), ~20.0 g NaOH (Fisher Scientific®), made up to 1,000 ml with ddH2O. Vigorously mix on magnetic stirrer with heater. The disodium salt of EDTA will not go into solution until the pH of the solution is adjusted to ~8.0 by the addition of NaOH. Give a brief rinse to NaOH granules with ddH2O in a separate glass before dissolving them. 2. 1 M Tris–HCl pH 8.0: 26.5 g Trizma® base (Sigma®), 44.4 g Trizma® HCl (Sigma®), made up to 500 ml with ddH2O. 3. Proteinase K 20 mg/ml: Add 5 ml of ddH2O to a 100 mg package of Proteinase K (Promega®). Store in 0.5 ml aliquots at –20°C. 4. 0.1 M Tris–HCl pH 6.4: 6.06 g Trizma® base made up to 500 ml with ddH2O. Adjust pH with HCl to 6.4–6.5. 5. 1 M NaCl: 29.22 g of NaCl (Fisher Scientific®) made up to 500 ml with ddH2O. 6. 1 M Tris–HCl pH 7.4: 9.7 g Trizma® base, 66.1 g Trizma® HCl, made up to 500 ml with ddH2O. 7. Insect Lysis Mix: 16.5 g of GuSCN (Sigma®), 12 ml of 0.5 M EDTA pH 8.0, 6 ml of 1 M Tris–HCl pH 8.0, 1 ml Triton X-100 (Sigma®), 10 ml Tween-20 (Fluka®), made up to a final volume of 200 ml with ddH2O. 8. Cap-strips.
2.4. High-Throughput DNA Extraction
1. AcroPrep™ 96 1 ml filter plate with 3.0 μm Glass Fiber media over 0.2 μm Bio-Inert membrane, natural housing (PALL®). 2. Axyseal™ sealing film (Axygen Scientific®). 3. PP MASTERBLOCK®, 96-well, 2 ml (Greiner Bio-One®). 4. Binding Buffer: 354.6 g of GuSCN, 20 ml of 0.5 M EDTA pH 8.0, 50 ml of 0.1 M Tris–HCl pH 6.4, 20 ml of Triton X-100, made up to final volume of 500 ml with ddH2O. Vigorously mix on magnetic stirrer with heater. If any recrystallization occurs, pre-warm at 56°C to dissolve before use. 5. Protein Wash Buffer: 26 ml of Binding Buffer, 70 ml of EtOH 96%, made up to 100 ml with ddH2O. Stable at room temperature for ~1 week, discard if any crystallization occurs. 6. Wash Buffer: 300 ml of EtOH 96%, 23.75 ml of 1 M NaCl, 4.75 ml of 1 M Tris–HCl pH 7.4, 0.475 ml 0.5 M EDTA pH 8.0, made up to 475 ml with ddH2O. Mix well, store at −20°C. 7. Microplate.
2.5. Archival Specimen DNA Extraction
1. DNeasy 96 Blood & Tissue Kit single columns (Qiagen): Buffers AL, AW1, AW2, and AE are included in the kit. 2. EtOH 96%. 3. Fisherbrand Premium Flat Top Microcentrifuge Tubes 1.5 ml (Fisher Scientific).
20
J.J. Wilson
2.6. PCR Amplification
1. ELIMINase®. 2. KimWipes. 3. D-(+)-trehalose dehydrate (Sigma-Aldrich). 4. 10× PCR Buffer supplied with enzyme (Invitrogen). 5. 50 mM MgCl2 (Invitrogen). 6. 10 mM dNTP mix (New England Biolabs). 7. 100 μM Primer Stock: Dissolve desiccated primer (Integrated DNA Technologies) in ($ × 10) μl ultrapure ddH2O. $ is different for every primer and is the number measured in “nmol” that can be found on the tube which the desiccated primer arrives in. Store at –20°C. 8. Taq Polymerase (Invitrogen). 9. Microplate. 10. Cap-strips.
2.7. High-Throughput PCR Check
1. 2% Agarose E-gel® 96 gel (Invitrogen).
2.8. Single Specimen PCR Check
1. 50× TAE buffer: Dissolve 242 g Tris(hydroxymethyl)aminomethane in 500 ml ddH2O, add 57.1 ml glacial acetic acid and 100 ml 0.5 M EDTA and make up to 1,000 ml with more ddH2O.
2. Mother E-Base™ (Invitrogen).
2. Ultrapure Agarose (Fisher Scientific). 3. Parafilm (Fisher Scientific). 4. 6× Loading dye (Fermentas, Thermo Fisher Scientific). 5. 100-bp DNA ladder (Invitrogen). 6. GelRed 10,000× in water (Biotium). 2.9. Cycle Sequencing
1. ELIMINase®. 2. KimWipes. 3. Microplate. 4. Dye terminator mix v3.1 (Applied Biosystems). 5. 5× ABI Sequencing buffer (Applied Biosystems). 6. D-(+)-trehalose dehydrate. 7. Primer.
2.10. Sequencing Clean-Up
1. Sephadex® G-50 (Sigma-Aldrich). 2. MultiScreen® Column Loader (Millipore). 3. Acroprep™ 96 Filter plate with 0.45-μm GHP membrane (PALL).
3
DNA Barcodes for Insects
4. MicroAmp® Optical 96-well Reaction BioSystems®, Cat. No. N801-0560).
Plate
21
(Applied
5. 0.1 mM EDTA pH 8.0 (Fisher Scientific). 6. Septa (Applied Biosystems).
3. Methods 3.1. Barcode of Life Datasystem
1. BOLD (2) is the recommended place to manage your barcoding efforts. We advise initiating your online “project” as the first step in any new study. 2. To create a user account on BOLD, navigate to the homepage http://www.boldsystems.org. 3. Under MANAGEMENT & ANALYSIS click on *Request a new user account. 4. Fill in the required personal details, invent and reconfirm a password, and Submit Request. You will receive an e-mail with your username and password. 5. To create a new project, log in and under Project Options in the left-hand column click Create New Project (see Note 1). 6. The Project Title should be meaningful to facilitate easy recall later (e.g., “Moths of the Olympic Peninsula”). 7. The Project Code is a short form of the title (3–5 letters, e.g., “LOP”) and forms the basis of Process IDs (see Note 2). 8. Select COI-5P—Cytochrome Oxidase subunit 1 5¢ Region as Primary Marker (see Note 3). 9. At the bottom of the form you can Assign Users of the project and select the type of access they will have. 10. Save the new project (see Note 4). 11. Each project can initially hold 999 records. If you will be submitting more than 999 specimens, repeat steps 1–5 above to create additional projects. Later the data can be temporarily merged online for analysis (see Note 5).
3.2. Specimens
1. For beginners to insect collecting, Basic Techniques for Observing and Studying Moths and Butterflies (14) is a good resource regardless of taxon focus. 2. For those eager to expand to large-scale regional inventories, Janzen et al. (4) provide details of a mammoth “guinea pig” initiative in Area de Conservacion Guanacaste, Costa Rica. 3. When collecting insects for DNA barcoding collectors should consider the data required by BOLD and GenBank to make sequence records “BARCODE” compliant (15).
22
J.J. Wilson
Table 1 Specimen collection information Field ID
Collectors Collection date Location (GPS) Notes
QUI001 Billy Black 13/9/2010
47.9053, -124.6261
Storage conditions
Light trap Collected into an individual tube of 99.9% EtOH which was transferred to the −20°C freezer on return to lab
4. The collector should note the way in which the insect was collected, e.g., light trap (see Table 1). 5. The storage conditions (see Table 1) should be recorded—Was the specimen stored in EtOH? Was it oven-dried? This information is crucial for understanding incidents of low DNA yield (see Note 6). 6. Care should be taken to prevent DNA degradation in your collected specimens. We advise specimens be collected into an individual tube of 99.9% EtOH (see Note 7) which is later deposited into a freezer (−20°C). If this is not possible, longerterm storage under ethanol at room temperature should suffice (16). 7. The ethanol should be frequently changed to ensure it remains at high concentration (as water diffuses out of the specimen, the ethanol concentration decreases) (16). 8. Museum collections can also be mined for barcoding (6). The most recently collected specimens and those preserved in ways which minimize DNA degradation are preferred, as are those with a good “record” (i.e., with information available to complete Table 1, and especially types). 3.3. Submitting Specimen Data to BOLD
1. Data can be submitted by typing directly on the webpage, but using a spreadsheet will most likely save time. Most data can be copied directly from the field records (e.g., Table 1). 2. Download a blank data template from BOLD (from http:// www.boldsystems.org click Documentation > Data management > Data submission protocol > download blank data submission template). 3. Open the template in Microsoft Excel. 4. On the Voucher Info sheet, enter Sample IDs (see Note 8). 5. Museum ID and Collection Code are optional (see Note 9). 6. Institution Storing must be completed for each sample. This is the location of the voucher specimen, not subsampled pieces of tissue (can be a private collection, see Table 2, museum or university).
3
DNA Barcodes for Insects
23
Table 2 Minimum data required for submission of specimen records to BOLD Voucher info sheet
Taxonomy sheet
Collection data sheet
Sample ID
Field ID
Institution Storing
Phylum
Country
QUI001
QUI001
Research collection of Carlisle Cullen
Arthropoda
USA
7. Proceed to the Taxonomy sheet and complete as fully as possible. 8. Proceed to the Specimen Details sheet and enter all known information (see Note 10). 9. Proceed to the Collection Data sheet and enter all known information (see Note 11). 10. Save the file (File > Save). 11. Spreadsheets can be uploaded by sending them through e-mail to
[email protected] and must contain data in the Sample ID, Field ID, Institution Storing, Phylum, and Country columns (Table 2). 3.4. Specimen Imaging
1. Make a pedestal by mounting a 15 cm piece of drinking straw vertically in a wooden base. Plug the top of the straw with modeling clay to allow single-specimens to be pinned in the top (14). 2. Take pictures using the high-quality mode on your camera. If a fairly wide aperture (for shallow depth of field) is employed, background shadows will be negligible (14). 3. The specimen should be centered in the image frame. 4. Photos should be taken as close-up to the specimen as possible, leaving very little gap around the edges. 5. Use Landscape orientation. 6. Use 2 × 3 aspect ratio if possible. This will ensure that the images are not skewed when viewed in the BOLD image library. 7. If desired, a measurement scale may be included in the image to provide a size reference. 8. Use a standardized orientation (Table 3) as this makes it much easier to compare specimens within a project.
3.5. Submitting Images to BOLD
1. Create a folder on your desktop called Images and place in it all the image files (in .jpg format) you would like to upload. 2. To create a list of the files in the Images folder open a terminal window (Start > Run and type “cmd” into the black box that appeared in Windows), navigate to the Images folder (see Note 12), and then run one of the following commands: Windows: dir > list.txt ; MacOS: ls > list.txt.
24
J.J. Wilson
Table 3 Common standardized animal orientations for specimen imaging Orientation
Explanation
Dorsal
The anterior of the specimen should be facing the top of the image frame The specimen should be face-down, with the dorsal aspect of the head visible
Lateral
The anterior of the specimen should be facing the left side of the image frame The specimen should be oriented with the feet towards the bottom of the image
Ventral
The anterior of the specimen should be facing the top of the image frame The specimen should be face-up, with the ventral aspect of the head visible
3. Download a blank image submission template from BOLD (from www.boldsystems.org click Documentation > Data management > Image submission protocol > please click here to download a blank image submission template). Save the file (ImageData.xls) in the Images folder on the desktop. 4. Open ImageData.xls in Microsoft Excel. 5. Next open list.txt (see Note 13) and move the data into the Image File column in ImageData.xls. The cells in this column should contain the name of an image file including the extension (.jpg). 6. In the Original Specimen column type yes for original or no for not original. 7. In the View Metadata column choose one of the standard options from Table 3. 8. In the Caption column type any information you wish to appear by the image on BOLD. 9. Obtain the Sample IDs and Process IDs from BOLD by clicking on Data Spreadsheets under the Downloads menu on the left side of your Project Console (see Note 4). Choose to download the Progress Report, open the file bold.xls and copy the data from the Sample ID and Process ID columns into the appropriate columns in ImageData.xls. 10. Once you have filled in all the mandatory columns (see Note 14), save the file (File > Save). 11. The folder Images needs to be zipped before submission to BOLD. Most modern operating systems have built-in functionality for zipping (see Note 15) so this simply requires rightclicking on the folder and selecting Compress “Images” or something similar. 12. Navigate to your BOLD project’s Project Console and under the Uploads menu on the left click Specimen Images. Browse through to Images.zip and click Submit (see Note 16).
3
3.6. Tissue Subsampling
DNA Barcodes for Insects
25
1. Make sure that your specimens are correctly organized. This protocol is appropriate with pinned specimens stored in a drawer, specimens stored in ethanol tubes, and specimens stored in glassine envelopes. Print off a list of specimens and Specimen IDs so you can double-check they are going into the correct well as you go (e.g., QUI001 goes in A1, QUI002 goes in B1, …). 2. Use clean gloves. 3. Clean workspace and wipe bench with Eliminase. 4. Work on top of a KimWipe. 5. Get a microplate. These instructions are for a 96-well microplate; however, the procedure is essentially the same when working with single tubes. This is going to be the microplate in which the lysis takes place. Make sure the microplate is in the correct orientation, e.g., A1 is in the top right corner of the plate (Fig. 1). 6. It is worth assigning two wells as control wells (Fig. 1) at this point. 7. Put cap-strips on all rows. 8. Turn on the gas slowly and light the Bunsen burner, so that there is a small blue flame. When it is not possible or dangerous to use a Bunsen or gas burner an alternative Eliminase dip protocol can be just as effective (see Note 17) and can be easily adapted for use in the field.
Fig. 1. Diagram detailing how to organize and fill a microplate with tissue, including designation of control wells.
26
J.J. Wilson
9. Remove the first cap-strip (row A) from the microplate, and place it on a KimWipe. Take out the first specimen. 10. Take the forceps and dip them in ethanol (carefully shaking off any excess, not near the flame) and put them in the flame for a few seconds to burn off the ethanol. 11. Remove a small piece of tissue from the specimen (about a 2–3-mm-long piece of insect leg) and place it in the first well (A1) in the lysis plate. 12. It is also possible to use whole specimens in the lysis (17) or whole abdomens, in the case of a combined lysis/genitalia dissection (18) (see Note 18). 13. Continue on to the next specimen and well, making sure to sterilize the forceps between each sample with ethanol and flame. Place each specimen back in its drawer/tube/envelope before moving onto the next one. 14. Put the cap-strip back on as you finish a row and then carefully take the cap-strip off the next row. 15. Return your specimens to the freezer or cabinet. 16. For specimens in ethanol, the subsampled tissue needs to be completely dried before moving on to the next stage. Incubate at 56°C for 30 min, with the cap-strips slightly loosened, to evaporate residual ethanol. 3.7. Tissue Lysis
1. For one plate mix 5 ml of Insect Lysis Buffer and 0.5 ml of Proteinase K, 20 mg/ml in a sterile container (see Note 19 for single tubes). 2. Carefully remove all the cap-strips from the microplate (prepared as above). These instructions are for a microplate of tissue containing 96 wells (Fig. 1) but the procedure is the same for single tubes. 3. Add 50 μl of Lysis Mix to each well using a multichannel pipette. If you are careful not to touch the microplate with the tips, you can use the same tips right across the microplate. 4. Cover microplate with cap-strips. 5. Incubate at 56°C for a minimum of 6 h or overnight to allow digestion. It is not necessary to shake the microplate during incubation. 6. Centrifuge at 1,500 × g for 15 s to remove any condensate from the cap-strips (see Note 20).
3.8. High-Throughput DNA Extraction (Ivanova et al. (19))
1. Retrieve your microplate from the lysis stage above and remove cap-strips. Add 100 μl of Binding Mix to each sample using multichannel pipette. Cover plate with new cap-strips. Shake vigorously for 10–15 s and centrifuge at 1,000 × g for 20 s to remove any sample from the cap-strips.
3
DNA Barcodes for Insects
27
2. Remove cap-strips and transfer the lysate (about 150 μl) from the wells into the wells of a GF plate placed on top of a squarewell block using multichannel pipette. Seal the plate with selfadhering cover. 3. Centrifuge at 5,000 × g for 5 min to bind DNA to the GF membrane. 4. First wash step: Add 180 μl of Protein Wash Buffer to each well of GF plate (see Note 21). Seal with a new cover and centrifuge at 5,000 × g for 2 min. 5. Second wash step: Add 750 μl of Wash Buffer to each well of the GF plate (see Note 22). Seal with a new self-adhering cover and centrifuge at 5,000 × g for 5 min. 6. To avoid incomplete Wash Buffer removal open the sealing cover, close it, and centrifuge the GF plates again for 5 min at 6,000 × g. 7. Remove the self-adhering cover. Place GF plate on the lid of a tip box (see Note 23). Incubate at 56°C for 30 min to evaporate residual ethanol. 8. Position a PALL collar on a new microplate and place the GF plate on top. Dispense 30–60 μl of ddH2O (pre-warmed to 56°C) directly onto the membrane in each well of GF plate and incubate at room temperature for 1 min. Seal plate. 9. Place the assembled plates on a clean square-well block to prevent cracking of the collection plate and centrifuge at 5,000 × g for 5 min to collect the DNA eluate. Remove the GF plate and discard it. 10. Cover DNA microplate with cap-strips or aluminum PCR foil. This is your DNA and it can be temporarily stored at 4°C or at −20°C for long-term storage. Label it well. 3.9. Archival Specimen DNA Extraction (See Note 24)
1. Vortex the sample from lysis stage (about 150 μl) for 15 s (see Note 25). 2. Add 200 μl Buffer AL and vortex it (a white precipitate will most likely form). Add 200 μl EtOH 96% and vortex until it is homogeneous (there should be a lot less white precipitate). 3. Pipette the liquid (set the pipette to 650 μl) into a spin column, make sure to label the cap, and centrifuge it at 6,000 × g for 1 min. 4. Discard the collection tube (see Note 26) and put the spin column into a new tube. Add 500 μl Buffer AW1 and centrifuge at 6,000 × g for 1 min. 5. Discard the collection tube and put the spin column into a new tube. Add 500 μl Buffer AW2 and centrifuge at 20,000 × g for 5 min.
28
J.J. Wilson
6. Discard the collection tube and remove the spin column carefully so as not to let it touch the liquid. Put the spin column into a 1.5 or 1.7-ml microcentrifuge tube (see Note 27) and label it. 7. Add 100 μl Buffer AE (elution buffer) and let it sit at room temperature for 1 min. Centrifuge at 6,000 × g for 1 min. 8. Pipette the DNA out of the bottom of the microcentrifuge tube (about 100 μl), place it back into the spin column, and place the spin column back in the microcentrifuge tube. Centrifuge for an additional 1 min at 6,000 × g. 9. The liquid in the bottom of the microcentrifuge tube is your DNA. DNA can be temporarily stored at 4°C or at −20°C for long-term storage. Label it well. 3.10. Designing PCR Primers
1. Primers should be between 20 and 30 nt in length. 2. Avoid complementarity within and between primers. 3. The GC content should be approximately 50%. 4. Avoid mono- or dinucleotide repetition within primers. 5. The primer should end on a G or a C. 6. Primers should end on the second (or first if necessary) position of a codon. 7. The melting temperatures of primer pairs should be within 5°C of one another. 8. To design COI primers for a particular taxonomic group, try aligning as many COI genes from closely related taxa as possible (try surfing GenBank http://www.ncbi.nlm.nih.gov/ genbank/) for the desired species group. Design primers that are situated in regions that are conserved across all taxa. 9. Remember to target the “barcode” region [i.e., overlapping with the region targeted by the Folmer primers (20) (Table 4)]. 10. Primers can be tailed with M13 tails (Table 4) to improve amplification success (16) and facilitate high-throughput sequencing protocols (21). However, some tailed versions can form strong primer dimers, reducing PCR efficiency (e.g., LepF1 and LepR1).
3.11. PCR Set-Up
1. Prepare PCR master mix either for a single tube or 96-well microplate following the recipe in Table 5 where details on ingredient preparation are also provided. 2. We use LepF1 and LepR1 (Table 4) as the primer pair in a first amplification attempt (see Note 28). 3. Remember as above to wear clean gloves, clean benches with Eliminase and work on top of a KimWipe. Also work in a cold block if possible.
3
DNA Barcodes for Insects
29
Table 4 Common primers used for DNA barcoding insects Name
Sequence
Use with
Direction
References
LCO1490
GGTCAACAAATCATAAAGATATTGG
HCO2198
F
(20)
HCO2198
TAAACTTCAGGGTGACCAAAAAATCA
LCO1490
R
(20)
LepF1
ATTCAACCAATCATAAAGATATTGG
LepR1
F
(24)
LepR1
TAAACTTCTGGATGTCCAAAAAATCA
LepF1
R
(24)
MLepF1
GCTTTCCCACGAATAAATAATA
LepR1
F
(25)
MLepR1
CCTGTTCCAGCTCCATTTTC
LepF1
R
(25)
M13F (-21)
TGTAAAACGACGGCCAGT
F
(26)
M13R (-27)
CAGGAAACAGCTATGAC
R
(26)
Table 5 Basic recipe for PCR Amount of ingredient (ml) Ingredient
Single tube
96-well microplate
Ingredient preparation
10% Trehalose
6.25
625
Dissolve 5 g D-(+)-trehalose dehydrate in 50 ml of total volume of molecular grade ddH2O. Store at −20 C
ddH2O
2
200
Store at 4°C
10× Buffer
1.25
125
10× PCR Buffer for Platinun Taq. Store at −20°C
50 mM MgCl2
0.625
62.5
50 mM MgCl2. Store at −20°C
10 mM dNTPs
0.0625
6.25
10 mM dNTPs mix. Store at −20°C in 100 μl aliquots
10 μM F Primer working solution
0.125
12.5
Add 20 μl of 100 μM primer stock to 180 μl ultrapure ddH2O. Store at −20°C
10 μM R Primer Working Solution
0.125
12.5
Add 20 μl of 100 μM primer stock to 180 μl ultrapure ddH2O. Store at −20°C
Taq (5 U/μl)
0.06
6
Platinum Taq polymerase. Store at −20°C in 50 μl aliquots
Total
10.5
1,050
30
J.J. Wilson
4. Label your mix tube and microplate (see Note 29). 5. Return PCR ingredients to the freezer. 6. Mixes in tubes can be stored at −20°C for up to 3 months (1–3 freeze–thaw cycles do not affect performance). The content of a tube should be mixed by pipetting before use. 7. For microplate (see Note 30): Aliquot 1/8 of total mix volume to each of the tubes in an 8-tube PCR strip (see Note 31). Dispense desired volume (10.5 μl for 12.5 μl reactions) into each well of the 96-well plate using multichannel pipette. 8. Retrieve your DNA plate/tube from the fridge. Add 1–2 μl of DNA extract (see Note 32) to each tube/well (see Note 33). Seal and return DNA. Seal microplate with self-adhering aluminum foil (for PCR) or close the tube. 9. Centrifuge the microplate/tube at 1,000 × g for 20 s and start thermocycling. 3.12. PCR Thermocycle Program
1. Typical conditions for COI amplification include the initial denaturation at 94°C for 1 min; five cycles of 94°C for 30 s, annealing at 45–50°C for 40 s, and extension at 72°C for 1 min; followed by 30–35 cycles of 94°C for 30 s, 51–54°C for 40 s, and 72°C for 1 min; with a final extension at 72°C for 10 min, followed by indefinite hold at 4°C. 2. Centrifuge the microplate/tube at 1,000 × g for 20 s.
3.13. High-Throughput PCR Check
1. Precast agarose gels (E-gels) and docks (E-bases) to use them on are available from Invitrogen™. This system is bufferless, so exposure to Ethidium Bromide is minimized. However, gloves should be worn when handling and loading the gel. 2. The recommended program for 2% Agarose E-gel® 96 gel is EG and the run time is 6 min. 3. Plug the Mother E-Base™ into an electrical outlet. Press and release the pwr/prg (power/program) button on the base to select program EG. 4. Remove gel from the package and remove plastic comb from the gel. 5. Slide gel into the two electrode connections on the Mother or Daughter E-Base™. 6. Load 16 μl of ddH2O into wells with 12-multichannel pipettor. 7. Load 4 μl of sample from your PCR microplate. 8. To begin electrophoresis, press and release the pwr/prg button on the E-Base™. The red light changes to green. 9. At the end of run (signaled with a flashing red light and rapid beeping), press and release the pwr/prg button to stop the beeping.
3
DNA Barcodes for Insects
31
10. Remove gel cassette from the base and capture a digital image of the gel on UV transilluminator equipped with digital camera. 11. As a rough guide, set the filter to two for Ethidium Bromide and the exposure time to 2 s. 12. Analyze the image and align or arrange lanes in the image using the E-editor™ 2.0 software available at: http://tools.invitro gen.com/egels/. 13. White bands indicate product; square slots are the loading wells. 3.14. PCR Check: Important and Old Specimens
1. This protocol requires you make the gel yourself which is more time consuming, but cheaper on materials and produces gels that are more sensitive to product. 2. Gel should be ~5 mm thick: measure the size of the gel tray and determine the volume of liquid you will need to make a 5-mm thick gel (e.g., for a gel tray measuring 10 × 20 cm you would need to start with—20 × 10× 0.5—100 ml of 1× TAE buffer, see Note 34). 3. Make sure that your tray is on a flat surface with tape securely on the sides. 4. Tape the edges of the tray so that it will hold liquid. 5. Measure out the agarose powder onto a piece of weigh paper using a metal spatula. The amount of agarose powder that you need depends on the percentage of the gel. Generally, 2% gels are best (e.g., to make a 2% agarose gel for the tray that takes 100 ml of buffer you need 1 g of agarose powder). 6. Add the agarose to a large beaker or Erlenmeyer flask. Add the 1× TAE buffer to the agarose. 7. Place the flask in the microwave on high power for 30 s. Gently swirl the flask using heat resistant gloves. Heat for another few seconds until the agarose has dissolved. 8. Be very careful because the agarose could burn you. 9. Let the flask sit for 5 min on the lab bench at room temperature to cool. 10. Place a comb of desired well width into the tray. Pour the hot liquid into the middle of the tray, trying to avoid creating bubbles. Push any large bubbles to the edges of the tray using a clean pipette tip. 11. Allow the gel to cool for 30 min. Remove the tape from the edges. 12. Set up the gel rig. 13. The liquid in the base should be 1× TAE buffer (see Note 35). 14. The gel should now be set and you can remove the tape from the edges of the gel tray. 15. Slowly lower the tray into place in the gel rig.
32
J.J. Wilson
16. Add more 1× TAE buffer to the gel rig until the gel is completely submerged. 17. Carefully remove the comb from the gel by rocking it back and forth while pulling up slowly. 18. Cut a piece of parafilm and place flat on the lab bench. For every PCR product you will be adding to the gel place a 1 μl drop of loading dye (see Note 36) onto the parafilm. Take your PCR product and add 6 μl to one of the droplets of dye. Using the same pipette tip draw up the PCR product/dye droplet. 19. With a steady hand, add this to a well in the gel. With multiple samples be sure to keep track of which well is holding which sample. 20. The loading dye makes the product heavy so it will sink to the bottom of the well. You can hold the tip directly above the well without entering the gel. When you add the samples to the wells be careful not to poke a hole in the gel. 21. Always run a DNA ladder in a well beside your samples. A ladder of 100 bp would be appropriate and you should add 1 μl of ladder for every 5 mm of well width. 22. Close the top of the gel rig. 23. Remember to have the black electrode near the wells and the red electrode at the opposite end of the gel. DNA runs towards the positive electrodes. 24. Run the gel with the rig set to 150 V. 25. The loading dye forms two bands that you can see—wait until they have moved close to the bottom of the gel then turn off the rig (approximately 20 min). 26. Carefully transfer the gel from the tray into a plastic container for staining. Pour in diluted GelRed (see Note 37) until it covers the gel. Let it sit with moderate manual mixing for 20 min. 27. Pour the GelRed back into the bottle carefully using the funnel. 28. Capture a digital image of a gel on a UV transilluminator, equipped with digital camera, usually located in your institution’s dark room. 29. As a rough guide set the filter to two for Ethidium Bromide and the exposure time to 2 s. 30. Print and save the image. 3.15. Cycle Sequencing Set-Up
1. When sequencing PCR product, you sequence in both forward and reverse directions. This is done with two different reactions and each reaction mix should include only a forward or reverse primer, not both. For example, for each microplate of PCR product, two microplates must be set up for sequencing, one with the forward primer and one with the reverse primer (see Note 38).
3
DNA Barcodes for Insects
33
Table 6 Basic recipe for cycle sequencing Amount of ingredient (ml) Ingredient
Single tube
Dye terminator mix v3.1
0.25
26
5× ABI sequencing buffer
1.875
195
10% Trehalose
5
520
10 μM Primer working solution
1
104
ddH2O
0.875
Total
9
96-well microplate
91 936
2. Prepare cycle sequencing master mix either for a single tube or 96-well microplate following the recipe in Table 6 and details on ingredient preparation in Table 5. 3. Remember as above to wear clean gloves, clean benches with Eliminase and work on top of a KimWipe. Also work in a cold block if possible. 4. Label your mix tube and any microplates (see Note 29). 5. Return cycle sequencing ingredients to the freezer. 6. Mixes in tubes (or pre-made plates, see Note 39) can be stored at −20°C for up to 3 months (see Note 40). The content of a tube should be mixed by pipetting before use. 7. For microplate : Aliquot 1/8 of total mix volume (115 μl) into each of the tubes in an 8-tube PCR strip (see Note 31). Dispense desired volume (9 μl) into each well of the 96-well plate using multichannel pipette. Changing tips after every row (see Note 41). 8. Retrieve your PCR product from the fridge. Add 1.5 μl of PCR product (see Note 42) to each tube/well (see Note 33). Seal and return PCR plate. Seal cycle sequencing microplate with self-adhering aluminum foil (for PCR) or close the tube. 9. Centrifuge the microplate/tube at 1,000 × g for 20 s and start thermocycling. 3.16. Cycle Sequencing Thermocycle Program
1. Denaturation at 96°C for 2 min. 2. Thirty cycles of 96°C for 30 s, annealing at 55°C for 15 s. 3. Additional extension at 60°C for 4 min. 4. Indefinite hold at 4°C (see Note 43).
34
J.J. Wilson
3.17. Sequencing Clean-Up and Analysis (Ivanova and Grainger (22))
1. Sequencers should be operated by specially trained technicians, many facilities exist and will often require the Cycle Sequencing microplate, a supply of sequencing primer and a plate record (Table 7). 2. Measure dry Sephadex® G-50 with the MultiScreen® Column Loader into the Acroprep™ 96 Filter plate with 0.45 μm GHP membrane. 3. Hydrate the wells with 300 μl of ddH2O. 4. Let the Sephadex® hydrate overnight in the fridge or for 3–4 h at room temperature before use. 5. Put Acroprep™ plate together with MicroAmp® Optical 96-well Reaction Plate and secure with at least two rubber bands. 6. Make sure the two sets weigh the same (adjust weight by using different rubber bands). 7. Centrifuge at 750 × g for 3 min—this is to drain the water from the wells. Discard water from MicroAmp® plates (these plates could be reused for the same procedure without autoclaving). 8. Add the entire volume of the cycle sequencing reaction to the center of Sephadex® columns. 9. Add 25 μl of 0.1 mM EDTA pH 8.0 to each well of the new (or autoclaved) MicroAmp® plate.
Table 7 Example of a plate record for a 3730xl DNA Analyzer (Applied Biosystems) Container name
Plate ID
Description
Container type
LOP Plate1
LOP Plate1
COI-Barcodes
96-Well
AppServer
AppInstance
Well
Sample name
Comment
Results group 1
A01
LOP001-11
LepF1
CC
B01
LOP013-11
LepF1
CC
App type
Owner
Operator Plate sealing Schedule pref
Regular
CCDB
CCDB
Instrument Analysis Protocol 1 Protocol 1 FolA700
3730BDTv3-KBDeNovo_v5.1
FolA700
3730BDTv3-KBDeNovo_v5.1
Septa
1234
3
DNA Barcodes for Insects
35
10. To elute DNA attach MicroAmp® plate to the bottom of the Acroprep™ plate—secure them with tape and with rubber bands. 11. Make sure the sets weigh the same (adjust weight by using different rubber bands). 12. Centrifuge at 750 × g for 3 min. 13. Remove MicroAmp® plate and cover its top with Septa. 14. Place MicroAmp® plate into the black plate base and attach the white plate retainer. 15. Stack assembled plate in 3730xl DNA Analyzer (Applied Biosystems)—do not forget barcode and plate record. 16. Discard Sephadex® from Acroprep™ plate. 17. Using the Plate Manager of the Data Collection software (Applied Biosystems), import the plate record(s) for the plate being run. 18. Begin the run within Run Scheduler. 3.18. Uploading Raw Sequences to BOLD
1. The sequencing outputs a folder of files. The files you are interested in have an extension .ab1, e.g., LOP001-11_F.ab1. These raw files (traces) can be edited into the form we are use to seeing DNA sequences represented in, i.e., a string of letters. However, as editing can be a subjective task, BOLD also requires the raw files (traces) be uploaded as part of a barcode’s collateral data. 2. To add trace files of your new sequences to the appropriate records in BOLD create a folder on your desktop called Traces and place in it all the .ab1 files that you would like to upload. 3. To create the list of files in the Traces folder, open a terminal window (Start > Run and type “cmd” into the black box that appeared in Windows), navigate to the Traces folder (see Note 44), and then run one of the following commands: Windows: dir > list.txt; MacOS: ls > list.txt. 4. Download a blank trace submission template from BOLD (from www.boldsystems.org click Documentation > Data management > Trace submission protocol > please click here to download a blank trace submission template). Save the file (data.xls) in the Traces folder on the desktop. 5. Open data.xls in Microsoft Excel. 6. You can then open list.txt and move the data into the Filename (.ab1) column in data.xls (see Note 45). The cells in this column should contain the name of a trace file including the extension (.ab1) (see Note 46). 7. In the FORWARD PCR PRIMER column enter the registered name of the forward primer used during the PCR. Copy it down through the entire column to the end of your file list.
36
J.J. Wilson
Table 8 Example of file data.xls A
B
C
D
E
F
G
J
Filename (.ab1)
Score file (.phd1)
Forward PCR Primer
Reverse PCR Primer
Sequencing Primer
Read direction
Process ID
Marker
LOP00111_F.ab1
LepF
LepR
LepF
Forward
LOP001-11a
COI-5P
LOP00111_R.ab1
LepF
LepR
LepR
Reverse
LOP001-11b COI-5P
a
Formula typed into this cell is = left(A2,9) Formula in this cell is = left(A3,9)
b
8. In the REVERSE PCR PRIMER column enter the registered name of the reverse primer used during the PCR. Copy it down through the entire column to the end of your file list. 9. In the column SEQUENCING PRIMER enter the registered name of your sequencing primer. It will alternate between forward and reverse. For example, LepF1 should line up with the read direction Forward (Table 8). 10. In the Read Direction column enter Forward or Reverse depending on the direction of the .ab1 files it refers to (see Note 47). 11. In the Process ID column you need to type in the formula “= left (A2, $)” where A2 is the column with your first .ab1 file and $ is the number of characters in the Process ID. For example LOP001-11 has nine characters ($ = 9). Therefore, $ may be more or less depending on the number of letters in the Project Code. 12. Press Control and A to select the entire page. Press Control and C to copy the page, and then go Edit > Paste Special and chose values and press OK. This removes the formulas from your sheet. 13. Save this file under the name data.xls and save it in your folder Traces. 14. Delete list.txt from your Traces folder. 15. The folder Traces needs to be zipped before submission to BOLD. See Subheading 3.5 for details on how to do this. Save as Traces.zip. 16. Navigate to your BOLD project’s Project Console and under the Uploads menu on the left click Trace Files. Browse through to Traces.zip and click Submit (see Note 48).
3
3.19. Sequence Editing
DNA Barcodes for Insects
37
1. Open CodonCode (http://www.codoncode.com) and choose Create a new project and press OK. 2. Go to File > Import > Add Folder > Traces then press Import. 3. To see the files you just imported press ► beside the Unassembled Samples folder. 4. Your .ab1 files should be of the form “LOP001-11_F” where the first part “LOP001-11” refers to the Process ID and the second part “F” refers to the sequence direction, i.e., Forward. 5. Sort files by quality by double-clicking on Quality. Any sequences that are of very poor quality or of short length highlight them and click the trashcan to delete them. 6. Next select the Contig menu and move the cursor over Advanced Assembly. From the options that appear select Assemble in Groups. 7. A window will appear asking if you would like to Define sample name parts? Choose Define names… to bring up another small window. 8. There are two parts to our filenames. The first will be the Process ID and for your purposes the option in the Meaning menu can be left as Clone. Since the Process ID is followed by underscore choose _ (underscore) in the Delimiter menu for Clone. 9. For the second part choose Direction in the Meaning menu. We can ignore the Delimiter for the Direction part because there is no actual delimiter following the direction. 10. Delete all the additional parts that may appear on this window. 11. Next click Preview… to check how aligner is interpreting the sample names. Click Close to exit the preview. 12. Click OK to return to the Assemble in Groups window. 13. In order to assemble our files according to direction you should choose Direction in the Name Part section. Then click Assemble. 14. You should now have two folders, one called F with the forward sequences and one called R with the reverse sequences. 15. Next you need to cut the primers from your sequences. Highlight the R folder and reverse and compliment the sequences using the button with three black arrows on it. 16. Double click the R folder to open it. For the reverse sequences, you need to find the forward primer motif (e.g., LepF1) and delete it from the beginning of the consensus sequence. You will find the primer around 50 nucleotides from the end of the raw sequence. For example, in Fig. 2a, you would need to delete the sequence marked in bold and everything to the left of it.
38
J.J. Wilson
Fig. 2. An example of sequence editing.
17. When you have located the primer, highlight it on the consensus sequence at the bottom of the window and press the Delete key. 18. Next go to the opposite end of the consensus, the far right, and delete the consensus sequence from the point where many Ns appear all the way to its very right-hand edge. For example, in Fig. 2b, you would delete the sequence marked in bold and everything to the right of it. Close the window. 19. Double click the F folder to open it. Go to the far right of the consensus sequence and find the reverse and complement of the reverse primer (e.g., LepR1) at the very end. This means that at the right end of the forward sequences, you will find the complement of the reverse primer backwards (e.g., if the reverse primer is ATGC then you will find GCAT at the end of your forward sequence). This should be around position 690–700 bp on the consensus sequence. For example, in Fig. 2c, you would need to delete the sequence marked in bold and everything to the right of it. 20. When you have located the primer, highlight it on the consensus sequence at the bottom of the window and press the Delete key. 21. Next go to the opposite end of the consensus, the far left, and delete the consensus sequence from the point where many Ns appear all the way to its very left-hand edge. For example, in Fig. 2d, you would delete the sequence marked in bold and everything to the left of it. 22. Dissolve both folders by clicking on the button marker with a red X. 23. Highlight all sequences and press the button marked with a black N. This time in order to assemble our files according to
3
DNA Barcodes for Insects
39
Process ID choose Clone in the Name Part menu. Then click Assemble. 24. Specimens which only sequenced successfully in one direction will have files which remain in the Unassembled Samples folder (see Note 49). 25. Open each folder (contig) by double-clicking and make sure that forward and reverse sequences have the correct orientation, i.e., forward sequence is in black with the arrow pointing to the right and reverse in red with the arrow pointing to the left. If they are backwards, reverse-complement the two files in the folder by closing the window, highlighting the folder and clicking the button with three black arrows. 26. Correct ambiguous positions (“N”s) and gaps (“-”s) in consensus sequences by checking the original trace chromatograms, which are present in the CodonCode project. This is done by double-clicking on the consensus sequence. Always open both trace files (forward and reverse) and compare them. 27. Generally if reads conflict (i.e., different colored peaks appear in the same location on the forward and reverse chromatograms) you can decide which is more reliable based on sequence quality (e.g., less background noise, cleaner peaks, taller peaks). 28. Correct bases in contigs first, and then check the single sequences in the Unassembled samples folder. This is a good idea because not all contigs will be kept, some will be dissolved or deleted. 29. Make sure single sequences are also in the correct orientation before uploading to BOLD. 30. To export the consensus sequences select all the folders using shift click, go File > Export > Consensus sequences…, choose Current selection. Open the Options and check Include gaps in FASTA but uncheck all other options by clicking. Press Export. Save the file to the desktop as sequences.fas (see Note 49). 3.20. Sequence Aligning
1. Open the file sequences.fas in BioEdit (see Note 50). 2. Make sure Mode: is set to Edit using the drop-down menu. 3. Another drop-down menu will become visible to the right of the Edit drop-down. Make sure this is set to Insert. 4. Sequences that have ended up in the FASTA file in the wrong orientation may be corrected by highlighting the sequence name by clicking the cursor on it, clicking the Sequences menu at the top of the screen. Moving the cursor down the dropdown to Nucleic Acid and clicking, Reverse complement. 5. Sequences all need to be 658 bp and aligned to each other before being uploaded to BOLD. This can be done by typing additional Ns at the beginning and end of your sequences in
40
J.J. Wilson
Fig. 3. An example of an unaligned and aligned FASTA file.
the BioEdit Edit mode. Be sure to check across the whole alignment of your sequences that you have added the correct number of Ns. 6. In Fig. 3 featuring a 50-bp barcode for simplification, LOP001-11 is of full length. LOP002-11 needs 6 Ns adding to the left side of the sequence to become aligned, while LOP003-11 needs 4 Ns adding to the right side of the sequence to be 50 bps long. LOP005-11_F needs to be reverse complemented to be in the same orientation as the other sequences. 7. Sequences which were not part of a consensus (i.e., when one direction failed but the single sequence is of sufficient length and quality for submission to BOLD) may appear in the FASTA still tagged with the direction. This needs to be deleted, e.g., the sequence named LOP005-11_F should be renamed as LOP005-11 (Fig. 3). 8. If you are having trouble with the alignment, a good quality (i.e., 658[0n]) sequence can be downloaded from BOLD and imported into your BioEdit file as a guide, e.g., MHAHC824-05 (Fig. 3). Be sure to delete this sequence before saving the file. 9. Save the file (File > Save). 3.21. Sequence Upload and Publication
1. Open the file sequences.fas in a text editor. This can usually be done by double-clicking on the file icon on the desktop. 2. Under the Edit menu, click Select All then under Edit, click Copy. 3. Navigate to your BOLD project’s Project Console and under the Uploads menu on the left click Sequences. 4. Right click on the box Paste sequences in fasta format: and click Paste. 5. Select the Markers: as COI-5P and select or register your Run site.
3
DNA Barcodes for Insects
41
6. Click Submit. 7. Once you are happy with all your data make your project public on BOLD by adding Public as a user (see Subheading 3.1).
4. Notes 1. The user who creates the project becomes the Project Manager. The Project Manager is the only user who can add new users. The Project Manager can be changed by contacting the BOLD team at
[email protected]. 2. We recommend avoiding the letters A, C, G, T, U, R, Y, M, K, W, S, B, D, H, V, and N. These are IUPAC nucleotide codes including the ambiguity codes which will appear in your sequences when a sequence-editing program is unable to make a base call. If you use these letters you may have difficulties later on during sequence editing and manipulation. 3. BOLD can store data for other regions besides COI-5P. The extracted DNA obtained by following these methods can be stored in a freezer and subsequently used as a template for other gene regions. For information about amplification of other regions frequently sequenced for insects see refs. 16 and 21. 4. To return to the Console of your new project simply log into BOLD and click on the project name in your list of projects. 5. If you will be creating multiple projects it may be worth launching a Campaign. To start a Campaign contact
[email protected]. Your Campaign can then be selected on the Create New Project page. 6. We’ve had incidences where specimens that should have sequenced successfully failed unexpectedly. After consultation with the collector we were able to attribute the failure to storage conditions. 7. DNA leaks into the storage fluid (23). For large specimens which may be damaged by ethanol, whole specimen can be stored dry and legs can be removed into ethanol. 8. If you enter Sample ID on any other sheet it will overwrite important macros. When copying and pasting information into the spreadsheet, use Paste Special and select Values to avoid overwriting formulas. Avoid using the Project Code in Sample IDs if possible, because the Project Code will form the basis of Process IDs. We advise Sample ID = Field ID where possible. Also keep in mind that each project in BOLD can have a maximum of 999 samples. Alternatively Sample ID can refer directly to the catalog number of a museum collection voucher.
42
J.J. Wilson
9. Museum abbreviations should follow standard registers for biorepositories, e.g., http://www.biorepositories.org/. 10. In the Sex column use M for male, F for female, or H for hermaphrodite. Reproduction refers to the type of lifecycle (use S for sexual, A for asexual, or P for parthenogenic). For Life Stage use either I for immature or A for adult. Extra info will show up on taxonomic identification trees generated by BOLD. Notes will not be seen on the tree, but they will appear on BOLD on the Specimen Page. 11. Latitude (North–South) and Longitude (East–West) must be in decimal format. A useful website for this conversion is http://www.calculatorcat.com/latitude_longitude.phtml . Elevation must be in meters, but it is not necessary to put “m” for meters beside the number. 12. To navigate to the folder, type cd desktop, press enter, type cd Images, press enter. 13. In Excel, go to File > Open… (change Enable: to All files) navigate to Desktop > Images > list.txt and click Open. A window will open called Text Import Wizard. Select Fixed width and click Next >. Scroll down until you can see your first file named .jpg and move the arrowed line beside it over to the right a little so that it touches the file name click Next > and Finish. 14. For information on the optional columns: Measurement, Copyright etc, please refer to the BOLD handbook (http://www. boldsystems.org > Documentation > Image Submission Protocol). 15. If your machine does not have built in zipping functionality try downloading a free program (WinZip: http://www.winzip. com; WinRar: http://www.rarsoft.com; or MacZipIt: http:// www.maczipit.com). 16. BOLD will give a message advising if the submission was successful. If problems have occurred, refer to the Image Submission—Tips and Troubleshooting section of the BOLD handbook (http://www.boldsystems.org > Documentation > Image Submission Protocol). 17. Eliminase protocol: (a) Get four clean jars. Label the first one “Eliminase” and add about 10 cm3 of Eliminase. (b) Label the next three jars “Wash 1,” “Wash 2,” and “Wash 3” and fill them all with 10 ml or more of ddH2O. (c) Dip your forceps into the Eliminase, shake them a bit, remove them and wipe off excess liquid using a clean KimWipe. (d) Dip your forceps and shake them slightly in Wash 1, then Wash 2, and finally in Wash 3. Dry them off using a clean KimWipe.
3
DNA Barcodes for Insects
43
18. In these cases the tissue must be retrieved from the lysis buffer prior to undertaking the DNA extraction. 19. For single tube lysis add 50 μl of lysis buffer and 5 μl of ProK. 20. This is high speed so place the lysis plate on a clean square-well block to prevent cracking. 21. You will need to put about 18 ml of Wash Buffer in the reservoir for a full plate. 22. You will need to put about 75 ml of Wash Buffer in the reservoir for a full plate. 23. Square-well blocks can be washed with ELIMINase® (or with any other DNA removing detergent), autoclaved, and reused. 24. The Qiagen kits can be stored at room temperature (15–25°C). Some ingredients may need storage at lower temperatures. 25. The Qiagen protocol suggests that you use a mortar and pestle to crush part of the insect into a powder, but we have found that this is unnecessary. 26. The following buffers contain toxic components that must not be thrown in the regular garbage: AL, ATL, AW1. Be sure that all liquid waste from DNA extraction is kept in a well-labelled glass jar. 27. This tube is not from the kit. It is one with a cap (see Subheading 2.5). 28. We find this has a very high success rate (99%) with recently collected specimens (<5 years old) and most likely these will be the only primers you will need. If you do not have success with these primers (see Subheading 3.14) the next strategy we recommend to try would be two amplification reactions: (1) using primer combination MLepF1 and LepR1 and (2) using primer combination MLepR1 and LepF1 (see ref. 25 and Table 4). These products are then sequenced in a single direction using LepR1 for the first product and LepF1 for the second product. The sequences can then be combined into a single contig close in length to the target 658-bp full-length barcode. If you have a very old and very important specimen but the above strategies have been unsuccessful, a further (time-consuming and expensive) option is amplification using “micro” primers, consult (8) and (9). 29. Put a star in the corner A1. 30. If you plan to fill several microplates include extra volume to allow for pipetting mistakes and dead volume in the digital multichannel pipettor (e.g., for making ten microplates with 12.5 μl reactions each, include about 40 extra reactions). 31. Once you become proficient can use the final row of the microplate instead of 8-tube PCR strip.
44
J.J. Wilson
32. Can use less DNA template if you find it is too concentrated. 33. Here it is essential to ensure your plates are in the same orientation. 34. TAE buffer is stored at 50× TAE. You will need to add ddH2O to the concentrated TAE buffer to get a 1× dilution, e.g., add 5 ml of 50× TAE to 250 ml of ddH2O to make 1× TAE. 35. Buffer in the rig is good for ~15 runs. 36. We use 6× loading dye, so this means 1 μl of dye for 6 μl of product. 37. GelRed should be diluted 10,000:1 with ddH2O. This means that you need to add 25 μl of GelRed to 250 ml water. GelRed can be used several times. Make sure to keep track of the number of uses. 38. An exception is when using MLepF1 and MLepR1 (see Note 29). 39. Addition of trehalose makes possible the freezing of aliquoted sequencing mixes. Currently, the Canadian Centre for DNA Barcoding uses a batch strategy for making sequencing plates. Mixes are aliquoted directly into 96-well plates, using a Biomek® FX robot; plates are covered with PCR film and stored at −20°C for up to 3 months. 40. The mixes are light sensitive so should be stored in a lightproof box or wrapped in aluminum foil. 41. If you are a skillful pipettor and set up your forward and reverse sequencing plates at the same time you can use the same tips to put PCR product into each plate. You will only need to use one box of tips if you only touch the very edge of the wells near the top, and do not contaminate the tips with primer in the process. 42. The volume of PCR product added to the sequencing reaction can be varied between 0.5 and 1.2 μl depending on the strength of the gel band. 43. The annealing temperature can be varied according to the primer specificity, but 55°C works well for most COI sequencing reactions. 44. To navigate to the folder, type cd desktop, press enter, type cd Traces, press enter. 45. In Excel, go to File > Open… (change Enable: to All files) navigate to Desktop > Traces > list.txt and click Open. A window called Text Import Wizard will open. Select Fixed width and click Next >. Scroll down until you can see your first file named .ab1 and move the arrowed line beside it over to the right a little so that it touches the file name click Next > and Finish.
3
DNA Barcodes for Insects
45
46. Score files are not compulsory and the column can be left blank; however, for more information on these and how you can include them see the BOLD handbook. 47. Usually the files names should be of the form (e.g., LOP00111_F.ab1) Process ID (LOP001-11) and direction (F), which should make this easier. 48. BOLD will give a message advising if the submission was successful. If problems have occurred, refer to the Trace Submission— Tips and Troubleshooting section of the BOLD handbook ( http://www.boldsystems.org > Documentation > Trace Submission Protocol). 49. To export the single direction sequences, go File > Export > Samples…, choose Current selection. Open the Options and select Include gaps in FASTA but deselect all other options. Press Export. Save the file to the desktop as sequences.fas. 50. BioEdit can be downloaded for free from http://www.mbio. ncsu.edu/bioedit/bioedit.html.
Acknowledgment Heather Braid compiled the “Barcoding in the Hanner Lab” protocols (http://barcoding.wikia.com/wiki/Barcoding_in_the_ Hanner_Lab_Wiki), which greatly aided with the structuring and content of this chapter, and also provided Fig. 1. References 1. Floyd R, Wilson JJ, Hebert PDN (2009) DNA barcodes and insect biodiversity. In: Footit RG, Adler PH (eds) Insect biodiversity: science and society. Blackwell Publishing, Oxford, pp 417–431 2. Ratnasingham S, Hebert PDN (2007) BOLD: The barcode of life data system (www.barcod inglife.org). Mol Ecol Notes 7:355–364 3. Janzen DH, Hajibabaei M, Burns JM et al (2005) Wedding biodiversity inventory of a large and complex Lepidoptera fauna with DNA barcoding. Phil Trans R Soc Lond B 360:1835–1845 4. Janzen DH, Hallwachs W, Blandin P, Burns JM, Cadiou J-M, Chacon I et al (2009) Integration of DNA barcoding into an ongoing inventory of complex tropical biodiversity. Mol Ecol Res 9:1–25 5. Xhou X, Robinson JL, Geraci CJ, Parker CR et al (2011) Accelerated construction of a
6. 7.
8.
9.
regional DNA-barcode reference library: caddisflies (Trichoptera) in the Great Smoky Mountains National Park. J Nor Amer Benth Soc 30:131–162 iBOL (2010) Barcoding blitz targets Australian Lepidoptera. Barcode Bulletin 1(4):5 Vaglia T, Haxaire J, Kitching IJ et al (2008) Morphology and DNA barcoding reveal three cryptic species within the Xylophanes neoptolemus and loelia species-group (Lepidoptera: Sphingidae). Zootaxa 1923:18–36 Hausmann A, Hebert PDN, Mitchell A et al (2009) Revision of the Australian Oenochroma vinaria Guenée, 1858 species-complex (Lepidoptera, Geometridae, Oenochrominae): DNA barcoding reveals cryptic diversity and assesses status of type specimen without dissection. Zootaxa 2239:1–21 Wilson JJ, Landry JF, Janzen DH et al (2010) Identity of the ailanthus webworm moth, a
46
10.
11.
12.
13.
14.
15.
16.
17.
J.J. Wilson complex of two species: evidence from DNA barcoding, morphology and ecology. Zookeys 46: 41–60 Dinca˘ V, Zakharov EV, Hebert PDN, Vila R (2011) Complete DNA barcode reference library for a country’s butterfly fauna reveals high performance for temperate Europe. Proc R Soc Lond B 278:347–355 Virgilio M, Backeljau T, Nevado B, de Meyer M (2010) Comparative performances of DNA barcoding across insect orders. BMC Bioinformatics 11:4567–4573 Vogler AP (2006) Will DNA barcoding advance efforts to conserve biodiversity more efficiently than traditional taxonomic methods? Front Ecol Environ 4:270–272 Pons J, Barraclough TG, Gomez-Zurita J et al (2006) Sequence-based species delimitation for the DNA taxonomy of undescribed insects. Sys Biol 55:595–609 Winter WD Jr (2000) Basic techniques for observing and studying moths & butterflies (Memoir No 5). The Lepidopterist’s Society, Cambridge Hanner R. (2005) Proposed standards for BARCODE records in INSDC (BRIs). http:// barcoding.si.edu/PDF/DWG_data_standards-Final.pdf Regier JC (2008) Protocols, concepts, and reagents for preparing DNA sequencing templates. Version 12/4/08. http://www.umbi. umd.edu/users/jcrlab/PCR_primers.pdf Porco D, Rougerie R, Deharveng L, Hebert PDN (2010) Coupling non-destructive DNA extraction and voucher retrieval for small softbodied Arthropods in a high-throughput context: the example of Collembola. Mol Ecol Res 10: 942–945
18. Knölke S, Erlacher S, Hausmann A et al (2005) A procedure for combined genitalia extraction and DNA extraction in Lepidoptera. Insect Syst Evol 35:401–409 19. Ivanova NV, deWaard J, Hebert PDN (2006) An inexpensive, automation-friendly protocol for recovering high-quality DNA. Mol Ecol Notes 6:998–1002 20. Folmer O, Black M, Hoeh W, Lutz R, Vrijenhoek R (1994) DNA primers for amplification of mitochondrial cytochrome c oxidase subunit I from diverse metazoan invertebrates. Mol Mar Biol Biotech 3: 294–299 21. Wilson JJ (2010) Assessing the value of DNA barcodes and other priority gene regions for molecular phylogenetics of Lepidoptera. PLoS ONE 5:e10525 22. Ivanova N, and Grainger C (2006) Protocols: Sequencing. Canadian Centre for DNA Barcoding CCDB Protocols. http://www.dnabarcoding.ca 23. Shokralla S, Singer GAC, Hajibabaei M (2010) Direct PCR amplification and sequencing of specimens’ DNA from preservative ethanol. BioTechniques 48:232–234 24. Hebert PDN, Penton EH, Burns J, Janzen DH, Hallwachs W (2004) Ten species in one: DNA barcoding reveals cryptic species in the neotropical skipper butterfly, Astraptes fulgerator. Proc Nat Acad Sci USA 101: 14812–14817 25. Hajibabaei M, Janzen DH, Burns JM, Hallwachs W, Hebert PDN (2006) DNA barcodes distinguish species of tropical Lepidoptera. Proc Nat Acad Sci USA 103:968–971 26. Messing J (1983) New M13 vectors for cloning. Meth Enzymol 101:20–78
Chapter 4 DNA Barcoding Methods for Invertebrates Nathaniel Evans and Gustav Paulay Abstract Invertebrates comprise approximately 34 phyla, while vertebrates represent one subphylum and insects a (very large) class. Thus, the clades excepting vertebrates and insects encompass almost all of animal diversity. Consequently, the barcoding challenge in invertebrates is that of barcoding animals in general. While standard extraction, cleaning, PCR methods, and universal primers work for many taxa, taxon-specific challenges arise because of the shear genetic and biochemical diversity present across the kingdom, and because problems arising as a result of this diversity, and solutions to them, are still poorly characterized for many metazoan clades. The objective of this chapter is to emphasize general approaches, and give practical advice for overcoming the diverse challenges that may be encountered across animal taxa, but we stop short of providing an exhaustive inventory. Rather, we encourage researchers, especially those working on poorly studied taxa, to carefully consider methodological issues presented below, when standard approaches perform poorly. Key words: DNA barcoding, Invertebrates, CO1, Cytochrome c oxidase subunit I
1. Introduction DNA barcoding as a tool for species level identification was developed in zoology and remains most facile for animals (1), reflecting the unusually rapid rate of mitochondrial DNA (mtDNA) sequence evolution that characterizes most Metazoa (2). As a result, relatively short mtDNA sequences, as generated from single, routine PCR reactions, are sufficient for species delineation and identification in many taxa. To date, efforts have focused primarily on the initial ~650 base pair “Folmer” region of cytochrome c oxidase subunit I (COI) which typically accumulates several percentage differences between related animal species (1). In contrast, rates of mtDNA sequence evolution in other eukaryotes: protists, plants, and fungi are much slower (2). Barcoding approaches in these
W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_4, © Springer Science+Business Media, LLC 2012
47
48
N. Evans and G. Paulay
groups require alternate, longer, or multiple gene regions, or are limited to supraspecific levels of differentiation. Thus, COI barcoding remains largely a zoological proposition. “Other invertebrates” encompasses almost all animal diversity. That is, invertebrates comprise approximately 34 phyla, while vertebrates represent one subphylum and insects a (very large) class. Consequently, the barcoding challenge in invertebrates is that of barcoding animals in general. While standard extraction, cleaning, PCR methods, and universal primers work for many taxa, taxonspecific challenges arise because of the shear genetic and biochemical diversity present across the kingdom, and because problems arising as a result of this diversity, and solutions to them, are still poorly characterized for many metazoan clades. The objective of this chapter is to emphasize general approaches, and give practical advice for overcoming the diverse challenges that may be encountered across animal taxa, but we stop short of providing an exhaustive inventory. Rather, we encourage researchers, especially those working on poorly studied taxa, to carefully consider methodological issues presented below, when standard approaches perform poorly. Challenges for barcoding across the Metazoa can be grouped into two broad classes: intrinsic, genetic issues of species delimitation, evolutionary rate, and behavior of potential markers, and extrinsic, methodological issues from sample processing to sequence generation. 1.1. Intrinsic Challenges
Species delineation, by any technique, requires that differences in the character(s) used for delineation to be greater between members of different species than among members of the same species. For markers to be useful at the species-level, they need to accumulate measurable divergence over the time frame of speciation. Markers that show limited interspecific divergence or comparable levels of intraspecific variation, do not perform well for species delineation. Thus, the general utility of any given molecular marker for specieslevel “barcoding” requires a fairly rapid, but broadly conserved rate of sequence evolution. Yet, the mode and tempo of speciation and molecular evolution are certainly not constrained and thus any “universal” marker may fail for those clades whose evolutionary dynamics deviate from that expected. This has clearly been born out for DNA barcoding in Metazoa. The relatively high, but comparatively conserved rate of sequence evolution of mtDNA has made CO1 the marker of choice in animals. Yet it has been repeatedly demonstrated that mtDNA sequence divergence is generally too slow for species delineation in most lower, non-bilaterian, animals, much as it is in plants or protists (see below, and papers in this volume). Conversely, unusually rapid sequence evolution has also been detected within a number of metazoans including pulmonate land snails (3), minute animals such as many meiofauna (4) and some parasitic taxa (e.g., (5)).
4 1.1.1. Species Delineation
DNA Barcoding Methods for Invertebrates
49
Species delineation involves characterization of diagnostic differences among species. Characters used for species delineation can be broadly grouped into three classes: morphological, genetic, and isolating. While morphological and genetic characters can be assessed directly, isolation is usually inferred from other sources of evidence and is rarely directly tested through mating/fertilization experiments. Rate variation among characters has important consequences for species delineation; these consequences are especially important to consider when characters are of different classes (Table 1). When the rate of morphological differentiation is slow relative to genetic differentiation and isolation, cryptic species result; a potentially common situation in some taxa (6). Genetic taxonomy has the most to contribute to species delineation in these cases. When the rate of genetic differentiation is slow relative to morphological divergence and isolation, as for example in some African rift lake cichlid species flocks (7), simple barcoding is less powerful than morphological species delineation. When isolation evolves more rapidly than divergence in DNA sequences or morphology, for example with polyploid speciation (8) or when selection acts directly on isolating mechanisms (e.g., on gamete recognition proteins; (9)), species recognition becomes especially challenging. Finally, when isolation evolves slowly relative to the accumulation of morphological or genetic variation within species, intraspecific polymorphism will result. Variation among rates of morphological divergence, genetic divergence, and emergence of isolating mechanisms implies that a priori criteria for species recognition, such as predefined levels of morphological character state changes or genetic thresholds, are vulnerable to error, especially when applied across broad taxonomic groups (10).
Table 1 Consequences of variation in character evolution Character type Morphological
Genetic
Isolating
Consequence
Fast
Slow
Slow
Polymorphism
Fast
Fast
Slow
Polymorphism
Fast
Slow
Fast
Morphospecies, poorly substantiated by barcoding
Slow
Fast
Fast
Cryptic species, barcoding powerful
Slow
Fast
Slow
Genetic polymorphism
Slow
Slow
Fast
Species recognition challenging
50
N. Evans and G. Paulay
Because speciation in animals is predominantly allopatric (11), initial differentiation usually takes place in isolation. Sympatry is usually secondary and can follow only when isolation is sufficient to prevent fusion of lineages. As a result co-occurring taxa are typically well differentiated, making species recognition usually straightforward in sympatry. Reciprocal monophyly in two or more independent genetic or morphological characters implies reproductive isolation in a sympatric setting, thus such populations meet the criteria of the Biological Species Concept (12). Note that as all mitochondrial genes are on one locus, mitochondrial markers in themselves are insufficient to test for reproductive isolation, although a pattern of deep divergence between clades is suggestive of it. In an allopatric setting, reproductive isolation cannot be readily assessed, thus less stringent and subjective species concepts are usually applied. Reciprocal monophyly in two or more independent characters (genetic, morphological, or geographic) can be used to define Evolutionary Significant Units (ESUs) or phylogenetic species (cf. (13)). While threshold-based definitions of species are problematic, it is useful to compare the average levels of divergence between sympatric species and allopatric ESUs in any taxon. ESUs that are isolated by at least as deep sequence divergence as sympatric species in the same taxon make good species hypotheses. 1.1.2. Marker Choice
The ideal marker is easily amplified, exists in a single form (single copy, or multiple but identical copies) per cell or organism, and exhibits sufficient sequence variation to distinguish species. The “Folmer” region at the 5¢ end of COI (14) was proposed as an ideal DNA barcode for these reasons (1), serves well for the majority of animals, and is the most widely used gene region for barcoding. The rapidly growing numbers of COI barcode sequences across the Metazoa, partly as a consequence of large-scale efforts (CBOL, IBOL, BOLD, etc.), is leading to the availability of a large and growing library of barcodes from identified, vouchered specimens for comparison. For most taxa, the COI barcoding region remains an ideal choice, and is the focus of this chapter. Nevertheless, additional or alternative molecular markers may be considered when CO1 sequences are insufficient to distinguish recognized species, when they conflict with interpretations of morphological or isolating characters, or when amplification is challenging (see below). Because of slow rates of sequence evolution, the Folmer region of COI tends to be insufficient for species delineation across much of the Porifera, Cnidaria, Ctenophora, and Placozoa (15–21). Other single gene regions have been explored with varied success, but effective DNA taxonomy in these basal phyla is moving toward multiple gene region approaches (e.g., (17, 22)). Nevertheless, certain clades among non-bilaterians do exhibit rapid rates of mtDNA evolution and can be resolved at the species level using single mitochondrial gene regions (e.g., (23)).
4
1.2. Methodological Challenges
DNA Barcoding Methods for Invertebrates
51
Methodological challenges in barcoding are those of isolating, amplifying, and sequencing DNA in general. These are briefly outlined here and are dealt with below under their respective protocols. First, tissues need to be preserved so that DNA does not degrade. There is substantial variation among animals in how rapidly tissue and DNA breaks down and also how easily liquid fixatives penetrate; this influences specimen handling and preservation. Second, depending on the DNA extraction protocol used, various other metabolites may coextract with the DNA, and some of these may cause PCR inhibition. Inhibitors tend to be clade specific, are inconsequential for many large taxonomic groups, but are important in others. Inhibition can be addressed by changing extraction protocols to minimize coextraction of inhibitor, cleaning the DNA extract to remove the inhibitor, or diluting the extract to a level where the effect of the inhibitor is lost, but sufficient DNA remains for amplification. Third, primers may not amplify the marker or amplify unintended additional markers. The former results when the sequence at the annealing site has evolved too far from that of the primer used, and can be addressed by making PCR conditions less specific (using lower temperature for annealing, higher concentration of MgCl2, or degenerate primers), by designing better (i.e., taxon-specific) primers, or by changing to alternate markers. The latter can be addressed by more stringent PCR conditions in some cases, but becomes challenging when it is the result of gene duplication, either as nuclear copies of mitochondrial genes (NUMTs), separate male, and female mitochondrial lines, or heteroplasmy. Such multiple copies pose challenges as well as opportunities in some taxa and are addressed in more detail below.
2. Materials Researchers should have access to standard field and molecular laboratory supplies and equipment. To prevent contamination in either setting, researchers should have and use materials that enable sterile techniques. This includes latex or nitrile gloves, filter pipette tips, kimwipes, bunsen burners to flame reusable dissecting instruments, and diluted bleach. 2.1. Tissue Subsample Preservation
1. 95–100% ethyl alcohol (EtOH) or DMSO–EDTA–salt buffer: 20% DMSO, 0.25 M sodium-EDTA, and NaCl to saturation, pH 7.5. 2. 2.0 ml Screw Cap Microtubes or 96-well plates with caps.
2.2. Preparation of DNA
1. DNAzol® genomic DNA isolating reagent (Molecular Research Center, Inc).
52
N. Evans and G. Paulay
2. Proteinase K solution, 20 mg/ml: Combine and mix 100 mg Proteinase K with 5 ml sterile dH2O (or 2.5 ml dH2O and 2.5 ml glycerin). Store aliquots at −20°C. 3. Sterile polypropylene pellet pestles. 4. 100% and 75% EtOH (preferably ice cold). 5. 1.7 ml polypropylene microcentrifuge tubes. 6. TE buffer: 10 mM Tris–HCl pH 8.0, 1 mM EDTA (ethylenediaminetetraacetic acid). 2.3. DNA Quantification (Optional; See Subheading 3.4)
1. Spectrophotometer (e.g., NanoDrop™ variety by Thermo Fisher Scientific Inc.).
2.4. PCR Amplifications
1. PCR tubes or 96-well PCR plates.
2. Mass DNA Ladder.
2. Primers (10 μM): see tables 6 and 7 for a list universal and taxon-specific primers for the “Folmer” region of CO1, and a few alternative markers. 3. Deoxynucleotide (dNTP) solution mix at a concentration of 10 mM for each of the four nucleotides. 4. A variety of Taq polymerase enzymes and PCR reagents are available separately or in kits and most will be equally suitable (reagents are listed in Table 3). Be aware that concentrations and properties may vary between different varieties of PCR reagents. Also, variation can exist in the efficacy of different Taq polymerases. Two that consistently work well are Taq DNA Polymerase (New England Biolabs), and Platinum Taq DNA Polymerase (Invitrogen). The latter is a heat activated, “hot-start” polymerase and, though more expensive, is more tolerant of reaction assembly at room temperature. 5. 15% Trehalose, (~0.4 M): Dissolve 7.5 g trehalose dihydrate in 50-ml sterile dH2O. Heating may be needed. Store aliquots at −20°C. Final concentrations in a PCR cocktail should be at approximately 0.2 M (24). 6. Bovine serum albumin (BSA) 2.5 μg/μl solution: Combine and mix 1 ml Ultrapure BSA (at 50 mg⁄ml; Invitrogen) with 20 ml sterile dH2O. Store aliquots at −20°C. Use at 0.2–0.4 μg/μl final concentration in a PCR cocktail (25).
3. Methods 3.1. Field Methods
1. Here, we consider mostly specimen processing and data tracking; more detailed treatment of biodiversity survey methods are provided by Templado et al. and Eymann et al. (26, 27).
4
DNA Barcoding Methods for Invertebrates
53
The Consortium for the Barcode of Life (CBOL) have defined Barcode Data Standards that include required as well as recommended data fields for barcode records. Required categories include a unique identifier (usually a collection catalog number) for the voucher specimen in a biorepository, an identification, and a country code. Recommended categories include latitude, longitude, collector, and collection date. As deposition of a voucher in a biorepository is required, additional data should also be collected for each specimen, to meet basic data standards of collection databases. These include depth/elevation, a hierarchy of location fields (e.g., state, county, specific locality), habitat/microhabitat, host association if any, notes, fixative, and preservative. Numerous other data fields are also used by various collections or for specific taxa. Finally, it is important to note the existence and unique identifiers of photo, tissue, or extraction samples taken from the specimen. 2. Recording these data and specimen tracking are best accomplished in a series of data tables in a Field Information Management System (FIMS). FIMS can be set up in spreadsheet or relational database formats; specifically designed FIMS databases have been created for a number of field biodiversity/ barcoding projects (e.g., CReefs, Moorea Biocode). Spatiotemporal, habitat, and collector data are typically kept in the station table, and referred to in the specimen table through a unique station number. Specific notes about the specimen, such as microhabitat (unless this is parsed into the station table), host, fixation procedures, and reference to photos and tissue/ extractions subsamples, are kept in a specimen table. Tables on photos and subsamples complete a basic FIMS (Table 2).
Table 2 Main fields/field types needed in a FIMS Station table
Specimen table
Photo table
Subsample table
Station #
Field #
Photo #
Subsample #
Locality
Identification
Field #
Field #
Habitat
Station #
Photographer
Tissue type
Elevation/depth
Microhabitat
Date
Plate/well #
Coordinates
Fixative
Notes
Date
Photo taken?
Collectors
Tissue taken?
Notes
Notes
54
N. Evans and G. Paulay
Note that each table has a unique identifier (for station, specimen, photo, and subsample) for sample tracking; additional unique identifiers (e.g., collection catalog number assigned to voucher specimen) may be added and linked to these. 3. Samples collected from a station are handled in the field appropriately for the method and taxa involved, so that specimens remain in good condition for preparation of vouchers, tissue subsamples, and photographs. Specimens may be fixed immediately in the field after collection, or transported live to the field lab for further processing. Bulk field fixation is more time-expedient, but prevents immediate taking and differential preservation of tissue subsamples, photographing live/fresh animals, or tracking specimen-level information. Live transport to the field lab allows specimens to be handled individually for photography, subsampling, and specific fixation protocols, but is more time consuming. Combining these approaches can be useful. Specimens that die and deteriorate rapidly (e.g., sponges) can be photographed and subsampled in the field, while specimens where lab photography and fixation is especially useful (e.g., opisthobranch mollusks, flatworms) can be transported live to the field lab for further processing. In contrast, bulk samples too large to process in the field and field lab (e.g., plankton sample) can be fixed immediately after collection. Some bulk collection methods include collection of the substratum (e.g., leaf litter, marine sediments, reef rock) from which specimens are extracted in the field lab. The use of chemicals that damage DNA (e.g., formalin) for extracting specimens should be avoided. 4. Live samples taken to the field lab should be sorted to morphospecies by people sufficiently knowledgeable about the taxon to make this relatively accurate. Three to five specimens are useful to aim for in taxa where morphospecies accurately reflect genetic species, while more specimens are useful when cryptic complexes are expected. It is also informative to take samples from across the geographic range of species when possible, as geographically differentiated cryptic complexes are common. For animals that are too small to provide useable morphological and genetic samples from the same individual, two sets of specimens can be prepared for morphological vouchers and DNA sequencing. Detection of only one species in each set by subsequent analysis lends confidence that specimens pertain to the same species. Retention of the extracted specimen as specimen voucher is possible in microfauna where identification characters are cuticle-based (e.g., most arthropods), by gently digesting soft tissues for DNA (e.g., with proteinase K), and preserving the remaining cuticle “shell” for voucher. 5. Voucher preparation usually involves relaxing, killing, fixing, and preserving the specimen based on taxon-specific protocols (26).
4
DNA Barcoding Methods for Invertebrates
55
Some taxa require fixation for morphological study in fixatives (e.g., formalin, glutaraldehyde) that are incompatible with DNA preservation; taking subsamples for genetic analysis prior to fixation is essential for these. Subsampling of ethanol-fixed specimens can be delayed until return to the home lab for field-expediency. 6. Photodocumentation can provide online access to the voucher and captures information often lost in fixed specimens. Photos should capture characters that allow identification. They can be of the whole organism, close-ups of diagnostic features, or various preparations. Thus, photo efforts should be guided by someone knowledgeable about the taxon. For some organisms (e.g., many sessile invertebrates), in situ photos can be especially informative, as even collection will disrupt their appearance. Photographs of fresh and relaxed specimens record living color and morphological features that may be altered by preservation, and can facilitate taxonomy as much as genetic data. In some taxa (e.g., in decapod crustaceans, opisthobranchs), the most closely related species differ mainly in color pattern rather than in structural morphology. In contrast, images of preserved or prepared specimens are as or more useful than images of live specimens for other taxa (e.g., SEMs for bryozoans, sections for helminths). 3.2. Subsample Preservation
1. Subsamples should be taken from body parts that are not important for morphological identification, have a low probability of contamination (from symbionts, environment, food, etc.), and are rich in mitochondria (to minimize potential NUMT coamplification). 1–3 mm3 of tissue provides an ideal subsample, but much smaller amounts are also sufficient. Subsampling should be done on a clean surface, and the tools used flamed to prevent contamination. 2. Subsamples can be preserved by freezing, drying, EtOH, DMSO–EDTA–salt buffer, proprietary buffers, or placed directly into extraction buffers (see Chapter 14). Use at least 5× as much preservative as the volume of the tissue sample. Placing subsamples directly into extraction buffer followed by DNA extraction is efficient and provides high quality genomic DNA, but uses up the subsample preventing future alternative extraction procedures. Ethanol provides an ideal preservative that often doubles as a preservative for the morphological voucher. Ethanol concentrations between 70 and 100% all work well, but for voucher fixation only 70–75% should be used as higher concentrations can make specimens dehydrated, brittle, and can lead to preservation artifacts. DMSO–EDTA–salt buffer is easier to transport and can leave higher quality genomic DNA in some taxa (28), but as tissue disintegrates in this solution, it is inappropriate for voucher
56
N. Evans and G. Paulay
preservation. Keeping preserved subsamples in a fridge or freezer until extraction slows DNA degradation. 3. Subsamples are ideally placed in 96-well plate format (or in tubes arranged in 96-well format, such as Matrix Storage Tubes (Thermo Scientific)), and worked in that format through to sequencing. When subsamples are collected in small numbers, or for replicate samples of especially important specimens, small tissue vials can be used. As possibilities of sample mixup or cross-well contamination are substantial for 96-well plates, extra care needs to be taken to prevent this. Staggering samples of the same species among non-neighboring cells facilitates detection of contamination. 3.3. Preparation of DNA
There are a diversity of DNA preparation methods and most are suitable for any metazoan (see Note 1). For larger scale projects, we suggest the high-throughput, silica-based DNA extraction protocol described by Ivanova et al. (29) (see Note 2). Here, we present a manual extraction protocol using DNAzol®. This simple and reliable method works well with most metazoans, produces highquality extractions, and is suitable for even decade old specimens. The manufacturer’s protocol can be carried out in minimal lab settings at room temperature in less than 30 min. However, we suggest the following modified approach to improve DNA yields and quality. 1. Place ~1–2 mm piece of tissue on parafilm. Remove extra storage buffer or EtOH by evaporation or blotting with a Kimwipe. Mincing tissue with a sterile blade can improve digestion and increase yield. Shaving off outer tissue layer can reduce inclusion of contaminants. 2. Transfer tissue to 1.7-ml polypropylene microcentrifuge tube. 3. Add 750 μl DNAzol® and 5 μl proteinase K (20 mg/ml). For challenging tissues, let it stand for ~10 min then add an additional 5–10 μl proteinase K. 4. Grind tissue with sterile pellet pestle (see Note 3). Alternatively, for particularly soft-bodied taxa (e.g., medusozoans) a simple vortex is sufficient. 5. Allow tissue to digest for ~24 h at room temperature, preferably on a rocking shaker. For fresh, high-quality tissue a 1-h digest may be sufficient, while for poor quality samples digestion can be extended for >24 h. 6. Centrifuge sample at ~12,000 × g for 15 min. 7. Carefully pipette supernatant into new 1.7 ml tube avoiding disturbance or transfer of pellet at bottom of original tube. Leaving some (<25 μl) supernatant behind will prevent such transfer and should not significantly affect yields. Discard original tube.
4
DNA Barcoding Methods for Invertebrates
57
8. Add 375 μl (i.e., ~50% of volume of supernatant) of 95–100% ice-cold EtOH. 9. Invert tube gently a few times. DO NOT vortex as DNA is particularly vulnerable to shearing at this stage. 10. Store between 4°C and −20°C for ~1 h. Additional time may result in co-precipitation of salts and affect extraction quality. 11. Centrifuge sample at ~12,000 × g for >5 min. Orient tubes in same direction (e.g., all cap hinges facing out), to facilitate locating and thus avoiding DNA pellet (angled at bottom of tube) during subsequent pipetting. 12. Carefully pipette or decant nearly all the supernatant without disturbing DNA pellet. If pellet is disturbed repeat from step 9. 13. Rinse sample twice, adding ~1 ml of 75% EtOH, centrifuging at 12,000 × g, and decanting (or pipetting) as above. 14. Carefully remove any remaining EtOH from tube, by pipetting or evaporation, without disturbing DNA pellet. Residual EtOH can be evaporated by leaving tube open but protected from contamination (e.g., covered with a Kimwipe), for up to a few hours. 15. Add 30–50 μl TE buffer or sterile dH2O, then mix by flicking tube or gently vortexing. Leave at room temperature for several hours or overnight to dissolve DNA pellet. If the extraction is noticeably viscous the concentration is likely high and additional TE buffer or sterile dH2O should be added. Alternatively, if yields are consistently low consider adding less TE/dH2O in future extractions. 16. Resulting genomic DNA extraction is ready for use in PCR. However, quantification and dilution of extraction should be considered. 3.4. DNA Quantification
The ideal DNA concentration for PCR falls broadly around 50–100 ng/μl and extractions tend to approximate this range. DNA quantification is optional, but we recommend it when PCR success is variable (see Note 4). In these cases genomic DNA extractions can be reliably quantified with a spectrophotometer. However, cruder estimates can be successfully made by electrophoresis of a 1-μl aliquot of DNA on a 0.8% agarose gel in parallel with a properly mass-quantified DNA ladder.
3.5. DNA Storage
Genomic DNA will degrade unless it is kept cold. Freezing is preferable but repeated freeze–thaw cycles also result in degradation of DNA (see Note 5). For repeated use over short term (days) store DNA at 4°C, but for longer term (weeks to a few years) keep DNA extracts at least at −20°C. Only temperatures at or below −80°C effectively halt degradation and should be used for long-term storage.
58
N. Evans and G. Paulay
3.6. PCR Amplifications
1. Calculate reagent volumes needed for PCR cocktail based on volumes in Table 3 multiplied by the number of reactions. A negative control reaction (i.e., no DNA template) should always be included; a positive controls (of easily/previously amplified DNA) is also useful. Due to pipetting errors it can be useful to add extra reaction volumes (we suggest approximately one additional reaction volume per 24 samples). 2. When including PCR enhancers replace corresponding volume of ddH2O with enhancer solution (Table 4). Inclusion of PCR enhancers provides a powerful and cheap method to improve PCR success, especially for poor quality DNA or those that contain inhibitory compounds (see Note 6).
Table 3 Standard PCR cocktail for one 25 ml reaction Reagents
25 ml rxn
ddH2Oa
19.5 μl 2.5 μl
10× buffer 50 mM MgCl
1.25 μl
10 μM forward primer
0.25 μl
10 μM reverse primer
0.25 μl
10 mM dNTPs
0.125 μl
Taq polymerase (5 units/μl)
0.125 μl
b 2
PCR cocktail total (1 rxn) DNA template
24 μl 1 μl
See Tables 6 and 7 for appropriate primer pairs May adjust ddH2O volume to accommodate additional reagents, DNA template, or PCR enhancing additives b Yields 2.5 mM MgCl2; a range between 0.5 and 3 mM is recommended, with higher concentrations making primer annealing less stringent a
Table 4 Optional PCR enhancing additives. To include, appropriately decrease ddH2O volume in 25 ml PCR cocktail PCR enhancers 15% Trehalose stock
12.6 μl
BSA 2.5 μg/μl stock
2–4 μl
4
DNA Barcoding Methods for Invertebrates
59
3. Thaw, on ice, DNA samples and all necessary PCR reagents, except for Taq polymerase. Taq is especially sensitive to thermal degradation, is usually suspended in glycerin and thus remains liquid at −20°C, thus can be pipetted directly from “frozen” tubes. 4. Combine PCR reaction cocktail on ice (see Notes 7 and 8). 5. Vortex and spin cocktail. 6. Pipette 24 μl of PCR cocktail into each PCR reaction tube. 7. Pipette 1 μl of appropriate DNA template into each reaction tube, except negative control. 8. Firmly seal reaction tubes and place in thermal cycler machine. 9. Start appropriate PCR thermal cycling profile program. 3.7. PCR Thermal Cycling Profiles
PCR profiles vary greatly and researchers should make an initial effort to test and optimize reactions for their particular thermal cycler machine, targeted marker, primer pair, and taxa of interest. Suggested thermal cycling profiles appear in Table 5 (see Note 9 for detailed explanations). These profiles, adjusted to the suggested
Table 5 Three thermal cycling approaches Approach
Utility
Thermal cycling profilea
Standard
Well suited for taxonspecific primers
94°C for 5 min, 35 cycles (94°C for 30 s, Ta [given in Table 7] for 45 s, 72°C for 1 min), 72°C for 5 min, hold at 4°C
Step-up
Decreases annealing specificity, appropriate for universal primers. Risk: co-amplification of contaminants or nontarget sequence
94°C for 5 min, 5 cycles (94°C for 30 s, ~5°C below Ta [given in Table 7] for 45 s, 72°C for 1 min), 30 cycles (94°C for 30 s, Ta [given in Table 7] for 45 s, 72°C for 1 min), 72°C for 5 min, hold at 4°C
Stepdown
Increases annealing specificity, eliminating co-amplified products. Risk: no amplification of target sequence
94°C for 5 min, 5 cycles (94°C for 30 s, ~5°C above Ta [given in Table 7] for 45 s, 72°C for 1 min), 30 cycles (94°C for 30 s, Ta [given in Table 7] for 45 s, 72°C for 1 min), 72°C for 5 min, hold at 4°C
See Note 9 for description Table 7 for appropriate annealing temperatures
a
60
N. Evans and G. Paulay
annealing temperatures for the primers used (Table 7), should provide a starting point for amplification of sequences less than approximately 800 bps in length. Longer sequences will require longer extension times and may require multiple amplifications and primer pairs. Usa a “heated lid” option for the thermal profile program whenever available, to prevent PCR reactions from condensing on the tube lids. 3.8. PCR Product Confirmation
Successful PCR amplification should be confirmed by electrophoresis of 2.5–5 μl of the amplicon and a molecular ladder in neighboring wells in a 1% agarose gel, made (or stained) with a dilute (~0.5 μg/ml) ethidium bromide (EtBr) solution and visualized under UV light (see Notes 10 and 11). Successful amplicons will appear as single, distinct bands. Faint or additional, spurious bands suggest that PCR or primer optimization is needed. Those conducting high-through put efforts may consider commercially available 96-well precast gel systems (e.g., Invitrogen E-gel 96 system).
3.9. Sequencing
Given the infrastructure, resources, and expertise needed to do sequencing, this step is usually contracted out to commercial or university core facilities. It is prudent to “shop around” for sequencing services (even internationally), comparing everything from volumes of PCR reactions requested, to average completion times. In our experience, researchers who can guarantee a high volume of samples may be able to negotiate a better price. We also recommend working with those facilities capable of affordably handling raw PCR products. However, in some cases it may still be more cost effective to “clean” or purify PCR products before submitting them. A variety of methods can be found in this volume and elsewhere (see Note 12).
3.10. Sequence Data Processing and Verification
1. Construct bidirectional contigs: Bidirectional sequence data (i.e., from forward and reverse sequencing primer reactions) should be assembled into a single contig to provide a reliable consensus sequence (see Note 13). This can be accomplished with various software including Geneious, Sequencher, UGENE, and MEGA (see Note 14). 2. Check sequence identity: Sequence identity should be checked to reduce the likelihood of proceeding with contaminant sequences, misidentified samples, or pseudogenes (discussed below). This can be carried out by conducting a BLAST query (http://blast.ncbi.nlm.nih.gov/Blast.cgi) or a “Taxon ID Tree” in BOLD (http://www.boldsystems.org/) (see Note 15). The quality of these queries is directly related to the library of available sequences. For understudied clades (especially highly divergent ones), these queries perform less favorably. Be cautious if results suggest unexpected taxon affinities.
4
DNA Barcoding Methods for Invertebrates
61
3. Create alignment: Before comparative analyses can proceed, sequences (of the same gene region) should be assembled into a multiple sequence alignment. There are a number of free programs capable of performing this (e.g., MAFFT, MUSCLE, ClustalW) (see Note 16). 4. Detection of contaminant and pseudogene sequences: Poor quality, contaminant or nontarget sequences can also be identified when they fail to properly align to other sequences, or if they possess unique indels or atypical sequence regions. For protein coding genes (e.g., CO1), nucleotide sequences should be translated into amino acid data, to confirm an open reading frame (i.e., no stop codons). Stop codons are indicative (but their absence is not a guarentee) that a nonfunctional, pseudogene region was amplified (a serious concern). For mtDNA genes, be careful to choose the correct mitochondrial genetic code for inferring amino acid sequences, as this varies among some animal phyla (see Note 17). Indels and introns, while rare, do exist within metazoan mitochondrial protein coding genes (21, 30–33). If translational frameshifts result, such sequences could be incorrectly identified as pseudogenes (30). 3.11. Alternative or Additional Markers
Additional or alternative molecular markers should be considered when CO1 data is insufficient to distinguish recognized species, when it conflicts with interpretations of morphological or isolating characters, or when CO1 amplification remains challenging (but see Notes 18–20). A brief overview of the most commonly used alternative species level markers can be found below (see Note 21 for mitochondrial, and Note 22 for nuclear markers). A limited selection of universal primers and additional references are provided in Tables 6 and 7. Successful amplification of many of these markers will require additional research and troubleshooting (see Notes 19 and 20).
4. Notes 1. Preparation of DNA from tissue subsample can be accomplished by either extraction protocols or cruder DNA “release” methods (34). DNA “release” approaches digest the tissue such that DNA is quickly brought into solution, but they stop short of isolating it from the lysate. These methods are both fast and inexpensive but do not produce DNA samples suitable for archiving and can contain PCR inhibiting compounds. However, if organisms or tissue samples are exceedingly small (e.g., meiofauna) and extraction protocols fail to produce suitable DNA yields, a DNA release approach ensures that no
62
N. Evans and G. Paulay
Table 6 Phylum specific strategies, caveats and references for Barcoding invertebrate fauna Phylum
Alternative CO1 “Folmer” region primers
Caveats
Notable references
Acanthocephala
1,2
(61–63)
Acoelomorpha
1
(64, 65)
Annelida
2,3
(42, 66–71)
Arthropoda: (excl. Hexapoda)
Chelicerate-F1, Chelicerate-R1, Chelicerate-R2, HCOoutout, CrustDF1, CrustDR1, CrustF1, CrustF2
2,3
(5, 40, 60, 72–83)
Brachiopoda
Cohen-Fwd, Cohen-Rev
1,2
(84, 85)
1,2
(86)
Bryozoa Cephalochordata
AmphL109, AmphH1325
(87)
Chaetognatha
(88)
Cnidaria: Anthozoa
MCOIF, MCOIR
2,3,4,5
(16, 17, 31, 32, 89–93)
Cnidaria: Medusozoa
LCOjf
2,4
(94–97)
Cnidaria: Myxozoa
1,2,4
(98, 99)
Ctenophora
1,2,4,5
(18, 100, 101)
Cycliophora
CycF, CycR
Echinodermata
COIceF, COIceR
(102) 2,4
(41, 103)
Entoprocta
1
(104)
Gastrotricha
1
(105)
1
(106)
Hemichordata
1,2,4
(107, 108)
Kinorhyncha
1
Loricifera
1
Micrognathozoa
1
(109)
2,3
(10, 13, 110–119)
Nematoda
2,3,4,5
(48, 55, 56, 82, 120, 121)
Nematomorpha
1
Gnathostomulida
Mollusca
Nemertea
COI-7, COI-D
dgLCO, dgHCO
HCOoutout
1,2
(122–124)
Onychophora
2
(125–127)
Orthonectida
1
(continued)
4
DNA Barcoding Methods for Invertebrates
63
Table 6 (continued) Phylum
Alternative CO1 “Folmer” region primers
Caveats
Notable references
Phoronida
1
(128)
Placozoa
2,3,4
(20, 21, 129)
Platyhelminthes
2,4,5
(65, 130–132)
2,3,4,5
(30, 47, 59, 133, 134)
Porifera
dgLCO, dgHCO
Priapulida
1
Dicyemida
1,3
(135)
Rotifera
2,3
(136–138)
Sipuncula
1,2
(139, 140)
Tardigrada
HCOoutout
1,2
(141–144)
Urochordata
Tun_fwd, Tun_rev2
1,2,4
(145, 146)
1,2
(119, 147)
Xenoturbellida
Caveats: 1. Limited or no DNA barcoding completed for this clade, 2. Additional/alternative markers, primer sets or pcr strategies reported (see references), 3. Peculiar genetics or biology warrant caution (see references), 4. Genetic code may deviate from standard invertebrate mtDNA code (see Note 17 or references), 5. “Folmer” CO1 region may be insufficient for DNA barcoding (see references)
DNA is discarded (a problem of varying degrees for most DNA extraction protocols). We recommend the DNA release protocol described by deWaard et al. (35) which utilizes Chelex® 100 (Bio-RAD). DNA extraction methods are more appropriate for isolating DNA from older tissues, from organisms known to possess PCR inhibiting compounds, and when high-quality, stable DNA is desired for molecular work or archiving purposes. Organic DNA extractions remain the cheapest and often most effective extractions methods but require the use of toxic materials (e.g. phenol and chloroform) and unless automated, are labor intensive. Where both tissue and funds are sufficient, commercially available silicabased DNA extraction kits provide both supplies and simple protocols that yield high-quality extractions. QIAGEN DNeasy® and Clonetech Nucleospin® tissue kits are among the most recommended, and are available in individual and 96-well plate formats. 2. This affordable high-throughput protocol has been adopted by the Canadian Centre for DNA Barcoding and can also be found on their website (http://www.ccdb.ca/pa/ge/research/ protocols). 3. To clean polypropylene pestels before reuse, soak them in bleach for >30 min, rinse with water, wrap in foil, and autoclave.
5¢–3¢ Forward primer sequence
CrustF1/HCO2198
LCO1490/ HCOoutout Chelicerate-F1/ Chelicerate-R1 Chelicerate-F1/ Chelicerate-R2 CrustDF1/ CrustDR1
COI-7/COI-D
CycF/CycR Cohen-Fwd/ Cohen-Rev Tun_fwd/Tun_rev2 AmphL109/ AmphH1325 COIceF/COIceR
LCO1490/ HC02198 dgLCO/dgHCO
TAAACYTCAGGRTGACCRAARAAYCA
GGTCWACAAAYCATAAAGAYATTGG
See above
GGATGGCCAAAAAATCAAAATAAATG
See above
TTTTCTACAAATCATAAAGACATTGG
CCTCCTCCTGAAGGGTCAAAAAATGA
TACTCTACTAATCATAAAGACATTGG
TCGTGTGTCTACGTCCATTCCTACTG TRAACATRTG TCTGGGTGTCCRAARAAYCARAA
ACTGCCCACGCCCTAGTAATGATATT TTTTATGGTNATGCC ACNAAYAARCAYGAYATYGGNAC GTAAATATATGRTGDGCTC
AACTTGTATTTAAATTACGATC TCNGAATAYCGNCGWGGTATNCC
TCGACTAATCATAAAGATATTAG ATTCGNGCNGAAYTNTCNCAGCC
See above
TTAAAATTACGRTCTGTYAAAAG TACCCYCGNCAAAAAC
TAAACTTCAGGGTGACCAAARAAYCA
GGTCAACAAATCATAAAGAYATYGG
CGRATGGARCTYTCTCAYCC ATTYTBCCNGGRTTTGG
TAAACTTCAGGGTGACCAAAAAATCA
5¢–3¢ Reverse primer sequence
GGTCAACAAATCATAAAGATATTGG
CO1 (5¢ “Folmer” region)
Primer name— forward/reverse
45 and 51°C
42 and 50°C 45 and 50°C 45 and 50°C 45 and 51°C
40°C
51°C
50°C 45–60°C
45°C NA
40–44°C
40–55°C
Ta
Table 7 Universal and phylum-specific primer pairs, sequences, and annealing temperatures
Crustacea
Crustacea
Arachnida
Gnathostomulida, Annelida Tardigrada, Chelicerata, Myriapoda Arachnida
Echinodermata
Urochordata Cephalochordata
Degenerate Universal Metazoa Cycliophora Brachiopoda
Universal Metazoa
Taxon utility
650 bp
650 bp
660 bp
660 bp
742 bp
657 bp
655 bp
586 bp 1 kb
487 bp 663 bp
650 bps
650 bps
Amplicon size
(73)
(80)
(79)
(77, 144, 150, 151) (79)
(149)
(41)
(145) (87)
(102) (84)
(148)
(14)
References
GGTTCTTCTCCACCAACC ACAARGAYATHGG TCTACAAATCATAAAGACATAGG GGTCAACAAATCATAAAGATATTGGAAC
5¢–3¢ Forward primer sequence
CGCCTGTTTATCAAAAACAT
AACCTGGTTGATCCTGCCAGT
ITS5/ITS4
TCCTCCGCTTATTGATATGC
ACGATCGATTTGCACGTCAG
TACTAGAAGGTTCGATTAGTC
TGATCCTTCCGCAGGTTCACCT
CCGGTCTGAACTCAGATCACGT
GAGAAATTATACCAAAACCAGG See above
See above
5¢–3¢ Reverse primer sequence
NA
52.5°C
52.5°C
47°C
45-55°C
55°C 45–51°C
42°C
Ta
Universal
Universal Metazoa
Universal Metazoa
Universal Metazoa
Universal Metazoa
Scleractinia Medusozoa
Crustacea
Taxon utility
>600 bps
0.8–1.3 kb
0.8–1.3 kb
1.8 kba
500 bp
650 bp 650 bp
650 bp
Amplicon size
Ta = reported annealing temperatures. Two temperatures indicate a Step-up or Step-down approach, a range indicates that reported Ta commonly varies a 18S can and often should be amplified and sequenced using multiple internal primers (see references)
GGAAGTAAAAGTCGTAACAAGG
See above
LSU D1D2 fw1/ LSU D1D2 rev2
ITS1, 5.8S, ITS2
AGCGGAGGAAAAGAAACTA
LSU D1D2 fw1/ LSU D1D2 rev1
28S rDNA (nuclear LSU) D1-D2 region
18 S-A/18 S-B
18 S rDNA (nuclear SSU)
16sar-L/16sbr-H
16 S rDNA (mitochondrial LSU)
MCOIF/MCOIR LCOjf/HCO2198
CrustF2/HCO2198
Primer name— forward/reverse
(158)
(57)
(57)
(156, 157)
(155)
(32, 152) (153, 154)
(73)
References
66
N. Evans and G. Paulay
4. Quantification of genomic DNA extractions is optional, because both low and high concentrations of quality DNA can provide good PCR amplifications. However, it is not uncommon to recover extractions as high as 500–1,000 ng/μl, and such high concentrations may inhibit PCR reactions and should be avoided. Highly viscous extracts are indicative of high DNA concentration. Creating and testing serial dilutions (e.g., 1:10, 1:100, and 1:1,000 dilutions of DNA in dH2O) can overcome PCR inhibition from high DNA concentration as well as from inhibiting contaminants present in an extraction. 5. Frost-free freezers often function by cycling temperatures and thus can promote sample degradation. Their use should generally be avoided for tissue, DNA, and reagent storage. 6. For problematic amplifications, including those from samples suspected to contain inhibitory compounds, there are a diversity of PCR enhancing additives that can be used (24, 25, 36, 37). Betaine, BSA, dimethyl sulphoxide (DMSO), and trehalose are among the most successfully used. Most enhancers function by stabilizing contaminants, enzymes, and PCR products in the reaction and many lower the melting temperature of GC-rich templates. We recommend both trehalose and BSA (Table 4). Given their consistent positive effects and minimal cost, we suggest always including one of these additives in a PCR reaction. Although we found no record of these reagents being used together, we suspect they would not interfere with one another. If PCR enhancers and dilutions (see Note 4) fail to provide reliable amplification it may be appropriate to try removing PCR inhibitors from DNA samples with commercially available DNA purification kits, or by trying alternate DNA extraction methods. Unfortunately, purification kits can negatively affect final DNA concentrations or quality (through size exclusion). 7. Prepared PCR cocktails are thermally unstable and should always be mixed just prior to use. However, addition of trehalose to the cocktail mix will enable storage and use of the cocktail mix for a few months, although repeated freeze–thaw cycles should be avoided. 8. Double (50 μl) or half (12.5 μl) this reaction volume are also commonly used. These all typically still include ~1 μl of DNA template. 9. A “Standard” PCR profile is widely applicable, especially for taxon-specific primers. However, degenerate or universal primers (e.g., the “Folmer” CO1 primers) may be more successful with a “Step-up” PCR approach in which lower annealing temperatures in the initial cycles facilitate less specific but more
4
DNA Barcoding Methods for Invertebrates
67
successful primer annealing. This creates a greater pool of target sequences for subsequent amplification cycles which run at higher, more optimal annealing temperatures. The downside to this approach is that lower initial annealing temperatures also facilitate amplification of nontarget regions or contaminant DNA. Some of these concerns can be avoided by not setting annealing temperatures lower than ~45°C. When amplification of nontarget sequences are of specific concern (e.g., when symbionts are known to be present) higher annealing temperatures can help and even a “Step-down” approach may be employed. “Step-down” profiles, like the related “Touchdown” approach (38) can avoid spurious PCR amplicons by beginning at higher, suboptimal annealing temperatures to increase primer specificity and the pool of target sequences before cycling at lower temperatures in which co-amplification occurs. Both “Step-Up” and “Step-down” approaches can be powerful tools for troubleshooting. 10. TAE (Tris–Acetate–EDTA) or TBE (Tris–Borate–EDTA) buffers work equally well for gel preparation and as electrophoresis buffers. If products are to be cut out of gel for further molecular work or preparations, TAE is recommended. 11. Given that EtBr is a known mutagen, use of gloves is necessary (nitrile forms provide better protection than latex). Review MSDS information and handle with care. 12. For ease of use, we suggest ExoSAP-IT (Affymetrix) for cleaning PCR products when this is not handled by the sequencing facility. The manufactures protocol works well, but using a 1:10 dilution of ExoSAP-IT is more affordable and still effective when the 37°C incubation period is extended by 15–30 min. Be aware that this method can make subsequent quantification of PCR products with a spectrophotometer unreliable. 13. If assembly of quality sequences into a bidirectional contig is not possible or several polymorphic sites are present, check the identity of each for contaminants (see appropriate section). Tracking down the source of this error is important and may involve reevaluating original specimens, DNA extractions, PCR reactions, or sequencing efforts. Additional troubleshooting may be required including cloning, sequencing, PCR amplification, extractions, or application of alternative primers. 14. Geneious Pro has a number of tools specifically developed to automate or speed up sequence editing and checking, and provides helpful video tutorials (http://www.geneious.com/). 15. Be aware that GenBank (the database queried in a BLAST search) is known to harbor misidentified species, pseudogene, and contaminant sequences, so caution should be taken when interpreting BLAST queries (39).
68
N. Evans and G. Paulay
16. For protein coding genes with few or no indels (e.g., CO1), we suggest employing simpler, faster algorithms. For more complex markers such as ribosomal DNA (rDNA) or those with large introns, alignment methods employing multiple iterative refinement steps are necessary. 17. NCBI (http://www.ncbi.nlm.nih.gov/) maintains an updated list of known alternative genetic codes under TAXONOMY > TOOLS > Genetic Codes. NCBI’s Translation Table 5 describes the standard invertebrate mitochondrial code. Relevant taxa with known deviations from this are: (a) Cnidaria, Ctenophora, and Placozoa (NCBI’s Translation Table 4). (b) Porifera (NCBI’s Translation Table 4 and 5). (c) Echinodermata and Hemichordata (NCBI’s Translation Table 9). (d) Urochordata (NCBI’s Translation Table 13). (e) Nematoda (NCBI’s Translation Tables 5 and 14). (f ) Platyhelminthes (NCBI’s Translation Tables 5, 9, 14 and 21). Understanding alternative codes for stop codons are the greatest concern when inferring the presence of pseudogenes from amino acid alignments. 18. When amplification is attempted in new or diverse sets of taxa (where primer efficacy has not been evaluated), primer fidelity can be a challenging problem. In these cases, taxon-specific primers can be developed for groups where universal primers do not work well (e.g., see refs. 40, 41). 19. Taxon-specific primers can be designed from alignments of sequences (partial or complete) from closely related taxa (try searching BOLD or GenBank). Focus on developing primers from highly conserved regions on either end of the desired gene. See Hoareau and Boissin (41) for a thorough example of this approach. 20. When developing new primers it is wise to adhere to the following guidelines: (a) Primers should be between 18 and 30 nucleotides, with a 40–60% GC content. (b) Melting temperatures of a primer pair should be between 52°C and 65°C and within 5°C of each other. (c) Avoid nucleotide repeats and base pair complementarities between and within primers. These can promote the formation of hairpin loops, self-annealing and primer dimers, and will negatively affect target sequence amplification. (d) Try including a G and/or C at or near the 3¢ end to provide a “GC clamp.”
4
DNA Barcoding Methods for Invertebrates
69
(e) For protein coding genes, avoid ending primer on a third base position of a codon. (f ) Primers should not exceed a total tenfold degeneracy, (e.g., twofold = two nucleotides substituted in one position). 21. Mitochondrial markers: Most metazoans share a highly conserved repertoire of approximately 37 mitochondrial genes (13 protein subunits, 2 rDNAs, 22 tRNAs) (42). In addition to this they often carry one or more non-coding “control” regions or intergenic spacers (IGS ). Though sequences of both tRNAs and noncoding regions have been successfully used for species level work (especially the latter), concerns with duplication or lack of true homology makes these markers problematic (5, 43–45). Furthermore, gene order rearrangement in mtDNA is common across Metazoa, even within closely related clades. As a result some caution should be taken when attempting to amplify through multiple gene regions (42, 46). I3-M11 partition of CO1: This region of CO1 (approximately 450 bp sequence) is just downstream of the Folmer region and has been demonstrated to be a more variable, thus successful species level marker for several clades including Porifera, Anthozoa, and Nematoda (47, 48). Ribosomal DNA (rDNA or rRNA): mtDNA includes sequences for a large ribosomal RNA subunit (termed LSU or 16S rDNA) and a small ribosomal RNA subunit (termed SSU or 12S rDNA). These sequences possess highly conserved, easily alignable domains interspersed with fairly divergent, difficult to align regions. Though care must be taken with alignment, these genes are often highly informative for both higher level and species level phylogenetic analyses. Many taxonomic communities prefer the dual utility of these genes, particularly the 5¢ end of 16S. Additional mtDNA protein coding genes: Twelve other protein coding genes are typically encoded in metazoan mtDNA (NADH 1-6, NADH 4L, CO 2, CO 3, Cyt b, ATP6, ATP8 ). These genes have each been used at varying success across Metazoa but a thorough review of their clade-by-clade specieslevel utility is outside the scope of this chapter. However, we refer readers to more universal protocols presented in the supplemental material of reference (49). 22. Nuclear markers: Development of nuclear, species-level markers for Metazoa are limited by a number of intrinsic challenges. Nuclear protein coding genes typically evolve at a much slower rate than mitochondrial ones, and can exist as members of complex gene families that make homology difficult to infer. Even closely related taxa can display unique gene duplication and extinction patterns. Thus, single copy nuclear genes are
70
N. Evans and G. Paulay
often not conserved as such across larger taxonomic scales (50). Furthermore, highly conserved nuclear genes often possess exons with little variation but can have introns that are highly variable and difficult to align. Some researchers have advocated taking advantage of this by developing exon primed intron crossing (EPIC) primers. EPIC markers amplify putative homologous intron regions that should be informative at or below the species level and thus may uniquely complement mtDNA barcoding data. Recent work by Chenuil et al. (51) provides both protocols for developing EPIC markers in Metazoa and a list of broad “universal” primers. Though effective species level nuclear protein coding genes do exist for some metazoan clades, none have emerged as a likely candidate for DNA barcoding across the kingdom. Traditional nuclear rDNAs that have long been used for multiple levels of analyses remain the best Metazoa-wide alternatives (52). Nuclear rDNA is comprised of three subunits separated by two internal transcribed spacers (ITS ). These are arranged in a single, tandem repeating unit from 5¢ to 3¢: 18S, ITS1, 5.8S, ITS2, and 28S. These high copy, repeating units typically maintain a single intragenomic sequence identity through concerted evolution (53), although this process can nevertheless maintain multiple unique rDNA copies. In addition, some clades are vulnerable to mobile elements that target rDNA and create a number of pseudogenes. For these reasons, many advocate caution when using these markers (54). These concerns can usually be addressed by intensive cloning and sequencing directed at a small fraction of the samples as well as amplification of larger sequences followed by nested PCRs. 18S (or SSU) rDNA: This large gene region (~1.8 kb) is generally better suited for higher level metazoan phylogenetics because of slow divergence rates. However, because it can be readily amplified it has served as a sort of higher taxon level DNA barcode. It is also popular in “species” level barcoding of nematodes (but see refs. 48, 55) and meiofauna in general, even though 18S may not show sufficient variation to distinguish between closely related species (4, 56). 28S (or LSU) rDNA D1-D2 region: At approximately 3.2 kb, 28S is even larger than 18S, however, it appears to have more informative, hypervariable regions, including the ~0.80–1-kb region of D1-D2, that some advocate using for lower taxonomic level analyses (57, 58). This marker certainly will be phylogenetically informative but its broad utility at the specieslevel has not been well documented (but see refs. 55, 59, 60). ITS1 and ITS2: Internal transcribed spacers 1 and 2 are thought to be under significantly less selective pressure than the rDNA subunit sequences (53). Their high sequence divergence rates
4
DNA Barcoding Methods for Invertebrates
71
are consistent with this, and have long made them important species level markers (52). However, this also likely explains why multiple unique copies are maintained in some metazoans. Yet these markers have played an important role for augmenting or replacing CO1 data in some clades where mtDNA performs poorly, especially many non-bilaterians. The length of ITS1 and ITS2 can significantly vary at the interspecific, intraspecific, and sometimes the intragenomic level, posing further challenges for species level analyses. This should be taken into consideration when troubleshooting these markers. References 1. Hebert PDN, Cywinska A, Ball SL, Dewaard JR (2003) Biological identifications through DNA barcodes. Proc R Soc Lond B Biol Sci 270:313–321 2. Lynch M, Koskella B, Schaack S (2006) Mutation pressure and the evolution of organelle genomic architecture. Science 311: 1727–1730 3. Davison A, Blackie RLE, Scothern GP (2009) DNA barcoding of stylommatophoran land snails: a test of existing sequences. Mol Ecol Resour 9:1092–1101 4. Creer S, Fonseca VG, Porazinska DL et al (2010) Ultrasequencing of the meiofaunal biosphere: practice, pitfalls and promises. Mol Ecol 19(Suppl 1):4–20 5. Hassanin A (2006) Phylogeny of Arthropoda inferred from mitochondrial sequences: strategies for limiting the misleading effects of multiple changes in pattern and rates of substitution. Mol Phylogenet Evol 38: 100–116 6. Knowlton N (1993) Sibling species in the sea. Ann Rev Ecol Syst 24:189–216 7. Verheyen E, Salzburger W, Snoeks J, Meyer A (2003) Origin of the superflock of cichlid fishes from Lake Victoria, East Africa. Science 300:325–329 8. Gregory TR, Mable BK (2005) Polyploidy in animals. In: Gregory TR (ed) The evolution of the genome. Academic, Waltham, MA, pp 428–501 9. Landry C, Geyer LB, Arakaki Y, Uehara T, Palumbi SR (2003) Recent speciation in the Indo-West Pacific: rapid evolution of gamete recognition and sperm morphology in cryptic species of sea urchin. Proc R Soc Lond B Biol Sci 270:1839–1847 10. Meyer CP, Paulay G (2005) DNA barcoding: error rates based on comprehensive sampling. PLoS Biol 3:e422 11. Coyne J, Orr H (2004) Speciation. Sinauer Associates, Sunderland, MA, p 545
12. Mayr E (1963) Animal species and their evolution. Harvard University Press, Cambridge, p 797 13. Meyer C, Geller J, Paulay G (2005) Fine scale endemism on coral reefs: archipelagic differentiation in turbinid gastropods. Evolution 59:113–125 14. Folmer O, Black M, Hoeh W, Lutz R, Vrijenhoek R (1994) DNA primers for amplification of mitochondrial cytochrome c oxidase subunit I from diverse metazoan invertebrates. Mol Mar Biol Biotechnol 3:294–299 15. Chen I-P, Tang C-Y, Chiou C-Y et al (2009) Comparative analyses of coding and noncoding DNA regions indicate that Acropora (Anthozoa: Scleractina) possesses a similar evolutionary tempo of nuclear vs. mitochondrial genomes as in plants. Mar Biotechnol 11:141–152 16. Huang D, Meier R, Todd PA, Chou LM (2008) Slow mitochondrial COI sequence evolution at the base of the metazoan tree and its implications for DNA barcoding. J Mol Evol 66:167–174 17. McFadden CS, Benayahu Y, Pante E et al (2010) Limitations of mitochondrial gene barcoding in Octocorallia. Mol Ecol Resour 11:1–13 18. Ortman BD (2008) DNA barcoding the medusozoa and ctenophora. Ph.D. Dissertation, University of Connecticut, Storrs, CT 19. Shearer TL, Coffroth MA (2008) DNA BARCODING: barcoding corals: limited by interspecific divergence, not intraspecific variation. Mol Ecol Resour 8:247–255 20. Signorovitch AY, Dellaporta SL, Buss LW (2006) Caribbean placozoan phylogeography. Biol Bull 211:149–156 21. Signorovitch AY, Buss LW, Dellaporta SL (2007) Comparative genomics of large mitochondria in placozoans. PLoS Genet 3:e13
72
N. Evans and G. Paulay
22. Wörheide G, Erpenbeck D, Menke C (2008) The Sponge Barcoding Project: aiding in the identification and description of poriferan taxa. In: Custódio M, Lôbo-Hajdu G, Haidu E, Muricy G (eds) Porifera research: biodiversity, innovation and sustainability. Museu Nacional de Rio de Janiero Book Series. Rio de Janeiro, Brazil, pp 123–128 23. Dawson MN, Jacobs DK (2001) Molecular evidence for cryptic species of Aurelia aurita (Cnidaria, Scyphozoa). Biol Bull 200:92 24. Spiess A-N-L, Mueller N, Ivell R (2004) Trehalose is a potent pcr enhancer: lowering of DNA melting temperature and thermal stabilization of Taq polymerase by the disaccharide trehalose. Clin Chem 50:1256–1259 25. Kreader CA (1996) Relief of amplification inhibition in PCR with bovine serum albumin or T4 gene 32 protein. Appl Environ Microbiol 62:1102–1106 26. Templado J, Paulay G, Gittenberger A, Meyer C (2010) Sampling the marine realm. In: Eymann J, Degreef J, Häuser C et al (eds) Manual on field recording techniques and protocols for all taxa biodiversity inventories. vol 8. ABC Taxa. Belgian National Focal Point for the GTI, Brussels, pp 273–307 27. Eymann J, Degreef J, Häuser C, Monje JC, Samyn Y, Van den Spiegel D (eds) (2010) Manual on field recording techniques and protocols for all taxa biodiversity inventories. vol 8. ABC Taxa. Belgian National Focal Point for the GTI, Brussels 28. Gaither M, Szabó Z, Crepeau M et al (2011) Preservation of corals in salt-saturated DMSO buffer is superior to ethanol for PCR experiments. Coral Reefs 30:329–333 29. Ivanova NV, Dewaard JR, Hebert PDN (2006) An inexpensive, automation-friendly protocol for recovering high-quality DNA. Mol Ecol Notes 6:998–1002 30. Rosengarten RD, Sperling EA, Moreno MA, Leys SP, Dellaporta SL (2008) The mitochondrial genome of the hexactinellid sponge Aphrocallistes vastus: evidence for programmed translational frameshifting. BMC Genomics 9:33 31. Sinniger F, Pawlowski J (2009) The partial mitochondrial genome of Leiopathes glaberrima (Hexacorallia: Antipatharia) and the first report of the presence of an intron in COI in black corals. Galaxea 11:21–26 32. Fukami H, Chen CA, Chiou C-Y, Knowlton N (2007) Novel group I introns encoding a putative homing endonuclease in the mitochondrial cox1 gene of Scleractinian corals. J Mol Evol 64:591–600
33. Milbury CA, Gaffney PM (2005) Complete mitochondrial DNA sequence of the eastern oyster Crassostrea virginica. Mar Biotechnol 7:697–712 34. Hajibabaei M, DeWaard JR, Ivanova NV et al (2005) Critical factors for assembling a high volume of DNA barcodes. Philos Trans R Soc Lond B Biol Sci 360:1959–1967 35. DeWaard J, Ivanova N, Hajibabaei M, Hebert P (2008) Assembling DNA barcodes. Analytical protocols. In: Martin C (ed) Methods in molecular biology. Humana, Totowa, pp 275–293 36. Bickley J, Hopkins D (1999) Inhibitors and enhancers of PCR. In: Saunders GC, Parkes HC (eds) Analytical molecular biology: quality and validation. Royal Society of Chemistry, Cambridge, UK, pp 81–102 37. Ralser M, Querfurth R, Warnatz H-J et al (2006) An efficient and economic enhancer mix for PCR. Biochem Biophys Res Comm 347:747–751 38. Hecker KH, Roux KH (1996) High and low annealing temperatures increase both specificity and yield in touchdown and stepdown PCR. Biotechniques 20:478–485 39. Siddall ME, Fontanella FM, Watson SC et al (2009) Barcoding bamboozled by bacteria: convergence to metazoan mitochondrial primer targets by marine microbes. Syst Biol 58:445–451 40. Schubart C (2009) Mitochondrial DNA and decapod phytogenies: the importance of pseudogenes and primer optimization. In: Martin JW, Crandall KA, Felder DL (eds) Decapod crustacean phylogenetics. CRC, Boca Raton, FL, pp 47–64 41. Hoareau TB, Boissin E (2010) Design of phylum-specific hybrid primers for DNA barcoding: addressing the need for efficient COI amplification in the Echinodermata. Mol Ecol Resour 10:960–967 42. Gissi C, Iannelli F, Pesole G (2008) Evolution of the mitochondrial genome of Metazoa as exemplified by comparison of congeneric species. Heredity 101:301–320 43. Chen C, Chiou CY, Dai CF, Chen CA (2008) Unique mitogenomic features in the scleractinian family pocilloporidae (Scleractinia: Astrocoeniina). Mar Biotech 10:538–553 44. Rawlings TA, Collins TM, Bieler R (2003) Changing identities: tRNA duplication and remolding within animal mitochondrial genomes. Proc Natl Acad Sci USA 100: 15700–15705 45. Walther E, Schofl G, Mrotzek G et al (2011) Paralogous mitochondrial control region in the
4
DNA Barcoding Methods for Invertebrates
giant tiger shrimp, Penaeus monodon (F.) affects population genetics inference: a cautionary tale. Mol Phylgenet Evol 58:404–408 46. Machida R, Miya M, Nishida M, Nishida S (2006) Molecular phylogeny and evolution of the pelagic copepod genus Neocalanus (Crustacea: Copepoda). Marine Biol 148: 1071–1079 47. Erpenbeck D, Hooper JNA, Worheide G (2006) CO1 phylogenies in diploblasts and the “Barcoding of Life” – are we sequencing a suboptimal partition? Mol Ecol Notes 6:550–553 48. Derycke S, Vanaverbeke J, Rigaux A et al (2010) Exploring the use of cytochrome oxidase c subunit 1 (COI) for DNA barcoding of free-living marine nematodes. PLoS One 5:e13716 49. Simon C, Buckley TR, Frati F, Stewart JB, Beckenbach AT (2006) Incorporating molecular evolution into phylogenetic analysis, and a new compilation of conserved polymerase chain reaction primers for animal mitochondrial DNA. Ann Rev Ecol Syst 37:545–579 50. Simpson R, Wilding C, Grahame J (2005) Intron analyses reveal multiple calmodulin copies in Littorina. J Mol Evol 60:505–512 51. Chenuil A, Hoareau TB, Egea E et al (2010) An efficient method to find potentially universal population genetic markers, applied to metazoans. BMC Evol Biol 10:276 52. Hwang UW, Kim W (1999) General properties and phylogenetic utilities of nuclear ribosomal DNA and mitochondrial DNA commonly used in molecular systematics. Korean J Parasitol 37:215 53. Eickbush TH, Eickbush DG (2007) Finely orchestrated movements: evolution of the ribosomal RNA genes. Genetics 175:477–485 54. Harris DJ, Crandall KA (2000) Intragenomic variation within ITS1 and ITS2 of freshwater crayfishes (Decapoda: Cambaridae): implications for phylogenetic and microsatellite studies. Mol Biol Evol 17:284 55. Derycke S, Fonseca G, Vierstraete A et al (2008) Disentangling taxonomy within the Rhabditis (Pellioditis) marina (Nematoda, Rhabditidae) species complex using molecular and morhological tools. Zool J Linn Soc 152:1–15 56. Bhadury P, Austen MC (2010) Barcoding marine nematodes: an improved set of nematode 18S rRNA primers to overcome eukaryotic co-interference. Hydrobiologia 641: 245–251 57. Sonnenberg R, Nolte A (2007) An evaluation of LSU rDNA D1-D2 sequences for their use in species identification. Front Zool 4:6
73
58. Markmann M, Tautz D (2005) Reverse taxonomy: an approach towards determining the diversity of meiobenthic organisms based on ribosomal RNA signature sequences. Philos Trans R Soc Lond B Biol Sci 360:1917–1924 59. Cárdenas P, Rapp HT, Schander C, Tendal OS (2010) Molecular taxonomy and phylogeny of the Geodiidae (Porifera, Demospongiae, Astrophorida)–combining phylogenetic and Linnaean classification. Zoolog Scripta 39: 89–106 60. McLain DK, Li J, Oliver JH (2001) Interspecific and geographical variation in the sequence of rDNA expansion segment D3 of Ixodes ticks (Acari: Ixodidae). Heredity 86:234–242 61. Benesh DP, Hasu T, Suomalainen L-R, Valtonen ET, Tiirola M (2006) Reliability of mitochondrial DNA in an acanthocephalan: the problem of pseudogenes. Int J Parasitol 36:247–254 62. Martínez-Aquino A, Reyna-Fabián ME, Rosas-Valdez R, Razo-Mendivil U, de León GP-P, García-Varela M (2009) Detecting a complex of cryptic species within Neoechinorhynchus golvani (Acanthocephala: Neoechinorhynchidae) inferred from ITSs and LSU rDNA gene sequences. Int J Parasitol 95: 1040–1047 63. Steinauer ML, Nickol BB, Ortí G (2007) Cryptic speciation and patterns of phenotypic variation of a highly variable acanthocephalan parasite. Mol Ecol 16:4097–4109 64. Sikes JM, Bely AE (2008) Radical modification of the A-P axis and the evolution of asexual reproduction in Convolutriloba acoels. Evol Dev 10:619–631 65. Telford MJ, Herniou EA, Russell RB, Littlewood DT (2000) Changes in mitochondrial genetic codes as phylogenetic characters: two examples from the flatworms. Proc Natl Acad Sci USA 97:11359–11364 66. Chang C-H, Rougerie R, Chen J-H (2009) Identifying earthworms through DNA barcodes: pitfalls and promise. Pedobiologia 52:171–180 67. Aguado MT, Nygren A, Siddall ME (2007) Cladistics analysis of nuclear and mitochondrial genes. Cladistics 23:552–564 68. Carr CM (2010) The polychaeta of canada: exploring diversity and distribution patterns using DNA barcodes. MSc Thesis, University of Guelph, Guelph, ON 69. James SW, Porco D, Decaëns T et al (2010) DNA barcoding reveals cryptic diversity in Lumbricus terrestris L., 1758 (Clitellata): resurrection of L. herculeus (Savigny, 1826). PLoS One 5:e15629
74
N. Evans and G. Paulay
70. Zhou H, Zhang Z, Chen H et al (2010) Integrating a DNA barcoding project with an ecological survey: a case study on temperate intertidal polychaete communities in Qingdao, China. Chin J Oceanol Limnol 28:899–910 71. Bely AE, Weisblat DA (2006) Lessons from leeches: a call for DNA barcoding in the lab. Evol Dev 8:491–501 72. Costa FO, Henzler CM, Lunt DH et al (2009) Probing marine Gammarus (Amphipoda) taxonomy with DNA barcodes. Syst Biod 7:365 73. Costa FO, DeWaard JR, Boutillier J, Ratnasingham S, Dooh RT, Hajibabaei M, Hebert PDN (2007) Biological identifications through DNA barcodes: the case of the Crustacea. Can J Fish Aquat Sci 64:272–295 74. Böttger-Schnack R, Machida RJ (2010) Comparison of morphological and molecular traits for species identification and taxonomic grouping of oncaeid copepods. Hydrobiologia 666:111–125 75. Bradford T, Adams M, Humphreys W, Austin A, Cooper S (2010) DNA barcoding of stygofauna uncovers cryptic amphipod diversity in a calcrete aquifer in Western Australia’s arid zone. Mol Ecol Resour 10:41–50 76. Goolsby JA, DE Barro PJ, Makinson JR, Pemberton RW, Hartley DM, Frohlich DR (2006) Matching the origin of an invasive weed for selection of a herbivore haplotype for a biological control programme. Mol Ecol 15:287–297 77. Murienne J, Edgecombe GD, Giribet G (2010) Including secondary structure, fossils and molecular dating in the centipede tree of life. Mol Phylogenet Evol 57:301–313 78. Navajas M, Navia D (2010) DNA-based methods for eriophyoid mite studies: review, critical aspects, prospects and challenges. Exp Appl Acarol 51:257–271 79. Barrett RDH, Hebert PDN (2005) Identifying spiders through DNA barcodes. Can J Zool 83:481–491 80. Radulovici AE, Sainte-Marie B, Dufresne F (2009) DNA barcoding of marine crustaceans from the Estuary and Gulf of St Lawrence: a regional-scale approach. Mol Ecol Resour 9:181–187 81. Ros VID, Breeuwer JAJ (2007) Spider mite (Acari: Tetranychidae) mitochondrial COI phylogeny reviewed: host plant relationships, phylogeography, reproductive parasites and barcoding. Exp Appl Acarol 42:239–262 82. Hurst GDD, Jiggins FM (2005) Problems with mitochondrial DNA as a marker in population, phylogeographic and phylogenetic studies: the effects of inherited symbionts. Proc R Soc Lond B Biol Sci 272:1525–1534
83. Engelstädter J, Hurst GDD (2009) The ecology and evolution of microbes that manipulate host reproduction. Ann Rev Ecol Evol Syst 40:127–149 84. Cohen BL, Bitner MA, Harper EM et al (2011) Vicariance and convergence in Magellanic and New Zealand long-looped brachiopod clades (Pan-Brachiopoda: Terebratelloidea). Zoolog J Linn Soc 162. doi: 10.1111/j.1096-3642.2010.00682.x 85. Lüter C, Cohen B (2002) DNA sequence evidence for speciation, paraphyly and a Mesozoic dispersal of cancellothyridid articulate brachiopods. Mar Biol 141:65–74 86. Gómez A, Wright PJ, Lunt DH et al (2007) Mating trials validate the use of DNA barcoding to reveal cryptic speciation of a marine bryozoan taxon. Proc R Soc Lond B Biol Sci 274:199–207 87. Kon T, Nohara M, Nishida M et al (2006) Hidden ancient diversification in the circumtropical lancelet Asymmetron lucayanum complex. Mar Biol 149:875–883 88. Jennings RM, Bucklin A, Pierrot-Bults A (2010) Barcoding of arrow worms (Phylum Chaetognatha) from three oceans: genetic diversity and evolution within an enigmatic phylum. PLoS One 5:e9949 89. Sinniger F, Reimer JD, Pawlowski J (2008) Potential of DNA sequences to identify zoanthids (Cnidaria: Zoantharia). Zoolog Sci 25:1253–1260 90. Concepcion GT, Crepeau MW, Wagner D et al (2007) An alternative to ITS, a hypervariable, single-copy nuclear intron in corals, and its use in detecting cryptic species within the octocoral genus Carijoa. Coral Reefs 27:323–336 91. Coleman AW, van Oppen MJH (2008) Secondary structure of the rRNA ITS2 region reveals key evolutionary patterns in acroporid corals. J Mol Evol 67:389–396 92. Chiou CY, Chen IP, Chen C et al (2008) Analysis of Acropora muricata Calmodulin (CaM) indicates that scleractinian corals possess the ancestral exon/intron organization of the eumetazoan CaM gene. J Mol Evol 66:317–324 93. Flot J-F, Magalon H, Cruaud C et al (2008) Patterns of genetic structure among Hawaiian corals of the genus Pocillopora yield clusters of individuals that are compatible with morphology. C R Biol 331:239–247 94. Miranda LS, Collins AG, Marques AC (2010) Molecules clarify a cnidarian life cycle – the “hydrozoan” Microhydrula limopsicola is an early life stage of the Staurozoan Haliclystus antarcticus. PLoS One 5:e10182
4
DNA Barcoding Methods for Invertebrates
95. Moura CJ, Harris DJ, Cunha MR, Rogers AD (2008) DNA barcoding reveals cryptic diversity in marine hydroids (Cnidaria, Hydrozoa) from coastal and deep-sea environments. Zoolog Scripta 37:93–108 96. Dawson MN (2004) Some implications of molecular phylogenetics for understanding biodiversity in jellyfishes, with emphasis on Scyphozoa. Hydrobiologia 530–531: 249–260 97. Ortman BD, Bucklin A, Pagès F, Youngbluth M (2010) DNA barcoding the Medusozoa using mtCOI. Deep Sea Res II 57: 2148–2156 98. Henderson M, Okamura B (2004) The phylogeography of salmonid proliferative kidney disease in Europe and North America. Proc R Soc Lond B Biol Sci 271:1729 99. Whipps CM, Kent ML (2006) Phylogeography of the cosmopolitan marine parasite Kudoa thyrsites (Myxozoa: Myxosporea). J Eukaryot Microbiol 53:364–373 100. Podar M, Haddock SH, Sogin ML, Harbison GR (2001) A molecular phylogenetic framework for the phylum Ctenophora using 18S rRNA genes. Mol Phylogenet Evol 21: 218–230 101. Gorokhova E, Lehtiniemi M, Viitasalo-fro S, Haddock SHD (2009) Molecular evidence for the occurrence of ctenophore Mertensia ovum in the northern Baltic Sea and implications for the status of the Mnemiopsis leidyi invasion. Limnol Oceanogr 54:2025–2033 102. Obst M, Funch P, Giribet G (2005) Hidden diversity and host specificity in cycliophorans: a phylogeographic analysis along the North Atlantic and Mediterranean Sea. Mol Ecol 14:4427–4440 103. Lessios HA (2008) The great American schism: divergence of marine organisms after the rise of the Central American Isthmus. Ann Rev Ecol Evol Syst 39:63–91 104. Fuchs J, Iseto T, Hirose M, Sundberg P, Obst M (2010) The first internal molecular phylogeny of the animal phylum Entoprocta (Kamptozoa). Mol Phyl Evol 56:370–379 105. Todaro MA, Kånneby T, Dal Zotto M, Jondelius U (2011) Phylogeny of thaumastodermatidae (gastrotricha: macrodasyida) inferred from nuclear and mitochondrial sequence data. PLoS One 6:e17892 106. Sørensen MV, Sterrer W, Giribet G (2006) Cladistics four molecular loci and morphology. Cladistics 22:32–58 107. Cannon JT, Rychel AL, Eccleston H, Halanych KM, Swalla BJ (2009) Molecular phylogeny of hemichordata, with updated
75
status of deep-sea enteropneusts. Mol Phyl Evol 52:17–24 108. Smith SE, Douglas R, Burke K, Swalla BJ (2003) Morphological and molecular identification of Saccoglossus species (Hemichordata: Harrimaniidae) in the Pacific Northwest. Can J Zool 141:133–141 109. Giribet G, Sorensen MV, Funch P et al (2004) Investigations into the phylogenetic position of Micrognathozoa using four molecular loci. Cladistics 20:1–13 110. Doucet-Beaupré H, Breton S, Chapman EG et al (2010) Mitochondrial phylogenomics of the Bivalvia (Mollusca): searching for the origin and mitogenomic correlates of doubly uniparental inheritance of mtDNA. BMC Evol Biol 10:50 111. Campbell DC, Johnson PD, Williams JD et al (2008) Identification of “extinct” freshwater mussel species using DNA barcoding. Mol Ecol Resour 8:711–724 112. Ghiselli F, Milani L, Passamonti M (2011) Strict sex-specific mtDNA segregation in the germ line of the DUI species Venerupis philippinarum (Bivalvia: Veneridae). Mol Biol Evol 28:949–961 113. Allcock AL, Barratt I, Eléaume M et al (2010) Cryptic speciation and the circumpolarity debate: a case study on endemic Southern Ocean octopuses using the COI barcode of life. Deep Sea Res II 114. Kelly RP, Sarkar IN, Eernisse DJ, Desalle R (2007) DNA barcoding using chitons (genus Mopalia). Mol Ecol Notes 7:177–183 115. Dinapoli A, Klussmann-Kolb A (2010) The long way to diversity–phylogeny and evolution of the Heterobranchia (Mollusca: Gastropoda). Mol Phylogenet Evol 55:60–76 116. Barr NB, Cook A, Elder P et al (2009) Application of a DNA barcode using the 16S rRNA gene to diagnose pest Arion species in the USA. J Molluscan Stud 75:187–191 117. Ladoukakis ED, Theologidis I, Rodakis GC, Zouros E (2011) Homologous recombination between highly diverged mitochondrial sequences: examples from maternally and paternally transmitted genomes. Mol Biol Evol 28:1–40 118. Breton S, Stewart DT, Shepardson S et al (2011) Novel protein genes in animal mtDNA: a new sex determination system in freshwater mussels (Bivalvia: Unionoida)? Mol Biol Evol 28:1645–1659 119. Bourlat SJ, Nakano H, Åkerman M et al (2008) Feeding ecology of Xenoturbella bocki (phylum Xenoturbellida) revealed by genetic barcoding. Mol Ecol Resour 8:18–22
76
N. Evans and G. Paulay
120. Bhadury P, Austen MC, Bilton DT et al (2007) Exploitation of archived marine nematodes – a hot lysis DNA extraction protocol for molecular studies. Zoolog Scripta 36:93–98 121. De Ley P, De Ley IT, Morris K et al (2005) An integrated approach to fast and informative morphological vouchering of nematodes for applications in molecular barcoding. Philos Trans R Soc Lond B Biol Sci 360: 1945–1958 122. Mateos E, Giribet G (2008) Exploring the molecular diversity of terrestrial nemerteans (Hoplonemertea, Monostilifera, Acteonemertidae) in a continental landmass. Zoolog Scripta 37:235–243 123. Maslakova S, Norenburg J (2008) Revision of the smiling worms, genus Prosorhochmus Keferstein, 1862, and description of a new species, Prosorhochmus belizeanus sp. nov. (Prosorhochmidae, Hoplonemertea, Nemertea) from Florida and Belize. J Nat History 42:1219–1260 124. Sundberg P, Thuroczy Vodoti E, Strand M (2010) DNA barcoding should accompany taxonomy – the case of Cerebratulus spp (Nemertea). Mol Ecol Resour 10:274–281 125. Daniels SR, Ruhberg H (2010) Molecular and morphological variation in a South African velvet worm Peripatopsis moseleyi (Onychophora, Peripatopsidae): evidence for cryptic speciation. J Zool 282:171–179 126. Trewick SA (2000) Mitochondrial DNA sequences support allozyme evidence for cryptic radiation of New Zealand Peripatoides (Onychophora). Mol Ecol 9:269–281 127. Podsiadlowski L, Braband A, Mayer G (2008) The complete mitochondrial genome of the onychophoran Epiperipatus biolleyi reveals a unique transfer RNA set and provides further support for the ecdysozoa hypothesis. Mol Biol Evol 25:42–51 128. Santagata S, Cohen BL (2009) Phoronid phylogenetics (Brachiopoda; Phoronata): evidence from morphological cladistics, small and large subunit rDNA sequences, and mitochondrial cox1. Zool J Linn Soc 157:34–50 129. Voigt O, Collins AG, Pearse VB et al (2004) Placozoa – no longer a phylum of one. Current Biol 14:944–945 130. Sanna D, Lai T, Francalacci P et al (2009) Population structure of the Monocelis lineata (Proseriata, Monocelididae) species complex assessed by phylogenetic analysis of the mitochondrial Cytochrome c Oxidase subunit I (COI) gene. Gen Mol Biol 32:864–867 131. Moszczynska A, Locke SA, McLaughlin JD et al (2009) Development of primers for the
mitochondrial cytochrome c oxidase I gene in digenetic trematodes (Platyhelminthes) illustrates the challenge of barcoding parasitic helminths. Mol Ecol Resour 9:75–82 132. Zarowiecki MZ, Huyse T, Littlewood DTJ (2007) Making the most of mitochondrial genomes–markers for phylogeny, molecular ecology and barcodes in Schistosoma (Platyhelminthes: Digenea). Int J Parasitol 37:1401–1418 133. Pöppe J, Sutcliffe P, Hooper JNA et al (2010) CO I barcoding reveals new clades and radiation patterns of Indo-Pacific sponges of the family Irciniidae (Demospongiae: Dictyoceratida). PLoS One 5:e9950 134. Wang X, Lavrov DV (2008) Seventeen new complete mtDNA sequences reveal extensive mitochondrial genome evolution within the Demospongiae. PLoS One 3:e2723 135. Watanabe KI, Bessho Y, Kawasaki M, Hori H (1999) Mitochondrial genes are found on minicircle DNA molecules in the mesozoan animal Dicyema. J Mol Biol 286:645–650 136. Derry AM, Hebert PDN, Prepas EE (2003) Evolution of rotifers in saline and subsaline lakes: a molecular phylogenetic approach. Limn Oceanograph 48:675–685 137. Fontaneto D, Kaya M, Herniou EA, Barraclough TG (2009) Extreme levels of hidden diversity in microscopic animals (Rotifera) revealed by DNA taxonomy. Mol Phy Evol 53:182–189 138. Gómez A, Serra M, Carvalho GR, Lunt DH (2002) Speciation in ancient cryptic species complexes: evidence from the molecular phylogeny of Brachionus plicatilis (Rotifera). Evolution 56:1431–1444 139. Du X, Chen Z, Deng Y, Wang Q (2009) Comparative analysis of genetic diversity and population structure of Sipunculus nudus as revealed by mitochondrial COI sequences. Biochem Genet 47:884–891 140. Kawauchi GY, Giribet G (2010) Are there true cosmopolitan sipunculan worms? A genetic variation study within Phascolosoma perlucens (Sipuncula, Phascolosomatidae). Marine Biol 157:1417–1431 141. Blaxter M, Mann J, Chapman T, Thomas F, Whitton C, Floyd R, Abebe E (2005) Defining operational taxonomic units using DNA barcode data. Philos Trans R Soc Lond B Biol Sci 360:1935–1943 142. Sands CJ, Convey P, Linse K, McInnes SJ (2008) Assessing meiofaunal variation among individuals utilising morphological and molecular approaches: an example using the Tardigrada. BMC Ecol 8:7
4
DNA Barcoding Methods for Invertebrates
143. Schill RO (2007) Comparison of different protocols for DNA preparation and PCR amplification of mitochondrial genes of tardigrades. J Limnol 66:164–170 144. Cesari M, Bertolani R, Rebecchi L, Guidetti R (2009) DNA barcoding in Tardigrada: the first case study on Macrobiotus macrocalix Bertolani & Rebecchi 1993 (Eutardigrada, Macrobiotidae). Mol Ecol Resour 9:699–706 145. Stefaniak L, Lambert G, Gittenberger A et al (2009) Genetic conspecificity of the worldwide populations of Didemnum vexillum Kott, 2002. Aquat Invasion 4:29–44 146. Nydam ML, Harrison RG (2007) Genealogical relationships within and among shallow-water Ciona species (Ascidiacea). Marine Biol 151:1839–1847 147. Bourlat SJ, Nielsen C, Lockyer AE et al (2003) Xenoturbella is a deuterostome that eats molluscs. Nature 424:925–928 148. Meyer CP (2003) Molecular systematics of cowries (Gastropoda: Cypraeidae) and diversification patterns in the tropics. Biol J Linn Soc 79:401–459 149. Kojima S, Segawa R, Hashimoto J, Ohta S (1997) Molecular phylogeny of vestimentiferans collected around Japan, revealed by the nucleotide sequences of mitochondrial DNA. Marine Biol 127:507–513 150. Prendini L (2005) Systematics of the group of African whip spiders (Chelicerata: Amblypygi): Evidence from behaviour, morphology and DNA. Organ Div Evol 5:203–236 151. Schwendinger PJ, Giribet G (2005) The systematics of the south-east Asian genus
77
Fangensis Rambla (Opiliones: Cyphophthalmi: Stylocellidae). Invertebr Syst 19:297–323 152. Fukami H, Budd AF, Levitan DR et al (2004) Geographic differences in species boundaries among members of the Montastraea annularis complex based on molecular and morphological markers. Evolution 58:324–337 153. Dawson MN (2005) Incipient speciation of Catostylus mosaicus (Scyphozoa, Rhizostomeae, Catostylidae), comparative phylogeography and biogeography in south-east Australia. J Biog 32:515–533 154. Martínez DE, Iñiguez AR, Percell KM et al (2010) Phylogeny and biogeography of Hydra (Cnidaria: Hydridae) using mitochondrial and nuclear DNA sequences. Mol Phyl Evol 57:403–410 155. Palumbi SR, Martin A, Romano S et al (2002) The simple fool’s guide to PCR, Version 2.0. Department of Zoology and Kewalo Marine Laboratory, Honolulu, HI 156. Apakupakul K, Siddall ME, Burreson EM (1999) Higher level relationships of leeches (Annelida: Clitellata: Euhirudinea) based on morphology and gene sequences. Mol Phylogenet Evol 12:350–359 157. Medlin L, Elwood HJ, Stickel S, Sogin ML (1988) The Characterization of enzymatically amplified eukaryotic 16S-like rRNA-coding regions. Gene 71:491–499 158. White T, Bruns T, Lee S, Taylor J (1990) Amplification and direct sequencing of fungal ribosomal RNA genes for phylogenetics. In: Innis M, Gelfand D, Sninsky J, White T (eds) PCR Protocols: a guide to methods and applications. Academic, New York, pp 315–322
Chapter 5 DNA Barcoding Amphibians and Reptiles Miguel Vences, Zoltán T. Nagy, Gontran Sonet, and Erik Verheyen Abstract Only a few major research programs are currently targeting COI barcoding of amphibians and reptiles (including chelonians and crocodiles), two major groups of tetrapods. Amphibian and reptile species are typically old, strongly divergent, and contain deep conspecific lineages which might lead to problems in species assignment with incomplete reference databases. As far as known, there is no single pair of COI primers that will guarantee a sufficient rate of success across all amphibian and reptile taxa, or within major subclades of amphibians and reptiles, which means that the PCR amplification strategy needs to be adjusted depending on the specific research question. In general, many more amphibian and reptile taxa have been sequenced for 16S rDNA, which for some purposes may be a suitable complementary marker, at least until a more comprehensive COI reference database becomes available. DNA barcoding has successfully been used to identify amphibian larval stages (tadpoles) in species-rich tropical assemblages. Tissue sampling, DNA extraction, and amplification of COI is straightforward in amphibians and reptiles. Single primer pairs are likely to have a failure rate between 5 and 50% if taxa of a wide taxonomic range are targeted; in such cases the use of primer cocktails or subsequent hierarchical usage of different primer pairs is necessary. If the target group is taxonomically limited, many studies have followed a strategy of designing specific primers which then allow an easy and reliable amplification of all samples. Key words: Amphibia, Testudines, Crocodylia, Sphenodontia, Squamata, COI primers
1. Introduction In contrast to numerous other taxa, especially fishes and birds among vertebrates, DNA barcoding of amphibians and reptiles is in a very early stage. We here use the term amphibians as encompassing all Lissamphibia, i.e., frogs, salamanders, and caecilians (as of February 2012, totaling 6,922 species: 6,115 frogs, 618 salamanders, and 189 caecilians) (1). Reptiles are a paraphyletic group and we use the term here to include, all nonavian extant taxa of the Testudines, Crocodylia, Sphenodontia, and Squamata (as of February 2008, 8,734 species: 313 turtles, 23 crocodiles, 2 tuataras, and 8,396 squamates) (2). W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_5, © Springer Science+Business Media, LLC 2012
79
80
M. Vences et al.
Only a few DNA barcoding campaigns on reptiles were initiated recently, e.g., DNA barcoding of the South African reptile fauna (also see the International Barcode of Life web site; www.ibol. org). To date, the number of studies and publications dedicated to DNA barcoding of reptiles in general is very limited. Exceptions are the manageable few species of marine turtles with high conservational implications, where a good progress of DNA barcoding was recently achieved (3, 4). Related to this issue of conservational biology and genetics, DNA barcoding was recently applied to identify species targeted by bushmeat practices and to identify among others alligators and crocodiles (5, 6). In amphibians, several test cases of COI DNA barcoding have been published (7–9) and an extensive DNA barcoding program is currently being carried out on Central and South American taxa and has already led to remarkable results (10). From our own work in progress, rich data sets, taxon coverage ca. 90 and 80% respectively, on amphibians and reptiles of Madagascar are available with research continuing to achieve complete taxon coverage, while ongoing field surveys will enable us to initiate similar barcoding efforts for the frogs of the Congo basin and of Cuba. Given the critical conservation status especially of many amphibians, implementation of larger amphibian DNA barcoding programs would be very useful. They would allow to more efficiently delimit the distribution area and habitat use of endangered species also on the basis of larvae or juveniles which currently cannot be reliably identified. Integration of molecular assessment would help to accelerate the pace of species discovery and the quality of species hypotheses (11, 12). Until 2010, the vast majority of amphibian and reptile COI sequences were not produced in the framework of the global DNA barcoding initiative but they are mostly the result of phylogenetic or phylogeographic studies where COI was used as one of the genetic markers. In addition, numerous COI sequences in GenBank originated from sequencing strategies in which a stretch containing full or partial ND1 and ND2 genes, intervening tRNAs, and only a short section (100–200 bp) of the 5¢ terminus of the COI gene are obtained for phylogenetic analysis (e.g., for amphibians see refs. 13, 14). We have not considered the studies involving this fragment in the primer tables given herein. Beyond investigations on DNA barcoding and phylogeny, there are a growing number of mitogenomic studies that have yielded COI sequences. Among the ones with stronger impact or including several species are (15–21) for reptiles and (22–25) for amphibians. These studies have certainly contributed to the number of available COI sequences, but are otherwise not related to the DNA barcoding effort as such. However, the available coverage of higher taxa such as orders and families in mitogenomic studies is of crucial importance because it allows the design of primers for a variety of regions of the mitochondrial genome (26),
5
DNA Barcoding Amphibians and Reptiles
81
including targeted COI primers for particular taxonomic groups or species in which universal primers may fail. A common theme in amphibian and reptile DNA barcoding is that there is no single pair of primers that will guarantee a sufficient rate of success across all taxa, which means that the strategy needs to be adjusted depending on the specific research question. As far as known there are also no primers universal within major amphibian or reptile subgroups, such as salamanders, frogs, snakes, or lizards. Our experiences show that for amplifying and sequencing large numbers of samples from a restricted taxonomic group (a single species or a complex of closely related species), it is most convenient to design specific primers. If a wide array of taxa are to be screened, either usage of a primer cocktail or a hierarchical approach is advisable (first using one pair of universal primers, and subsequently using a different set of primers for samples that have failed to amplify in the first attempt). A first compilation of mitochondrial DNA primers used in amphibians was published in 1999 (27) but only included a few COI primers. Although not comprehensive, Tables 1 and 2 show a representative overview of primers and annealing temperatures used so far in studies that involved sequencing of COI in a larger number of samples of amphibians or reptiles, respectively. The specificity of primers and the targeted fragment size vary case by case, and the position of primers in the COI gene, and relative to the Folmer region (28), is shown in Figs. 1 and 2. When barcoding amphibians and reptiles, it is to be kept in mind that many species and species complexes are evolutionarily old and contain cryptic candidate species and deep conspecific lineages (refs. 7, 29; see also Note 1). This situation appears to be more commonly encountered in the tropics. In temperate regions, on the one hand, species are better studied so that discovery of new cryptic lineages happens less frequently; on the other hand these species have often expanded from glacial refuges in the Pleistocene, so that similar mitochondrial haplotypes can be encountered over vast geographic ranges and divergences within species are less deep. Altogether, DNA barcoding of amphibians and reptiles based on COI is not fundamentally different from that in other animal groups and has the same promises. Specifics to be kept in mind are mainly the old age of many species and the potential presence of very deeply diverged mitochondrial lineages within species which (a) make it necessary to have very complete COI reference databases for a successful species identification and (b) accentuate the problem of primer failure in single samples even within species or species complexes. Below we give a brief overview of laboratory methods for tissue sampling and for extracting DNA as well as amplifying and sequencing COI from amphibian and reptile specimens. These methods,
Primer name
COIf
COIa
COIa2
LCO1490
HCO2198
VF2 t1
FishF2 t1
Specificity/origin
Universal
Universal
Universal
Universal
Universal
Fishes
Fishes
5,391
5,392
6,089
5,406
6,662
6,707
6,047
52 used in cocktail (tailed)
TGTAAAACGACGGCCA F GTCGACTAATCATA AAGATATCGGCAC
50; 49–50
50; 49–50
45
45; 57
45; 57
Annealing temperature (°C)
52 used in cocktail (tailed)
R
F
R
R
F
Direction
F
GTAAAACGACGGCCA GTCAACCAACCACA AAGACATTGGCAC
TAAACTTCAGGGA CCAAAAAATCA
GGTCAACAAATCA TAAAGATATTGG
CCTGCYARYCCTA RRAARTGTTGAGG
AGTATAAGCGTCT GGGTAGTC
CCTGCAGGAGGA GGAGAYCC
Position Sequence (5¢–3¢)
Tungara frogs (Physalaemus)
(50)
(52)
(52)
(28)
Clawed frogs (Xenopus)
Clawed frogs (Xenopus)
Poison frogs (Oophaga); Malagasy frogs (Mantellidae)
Poison frogs (Oophaga); Malagasy frogs (Mantellidae)
Tungara frogs (Physalaemus); dirt frogs (Craugastor)
(46)
(28)
Tungara frogs (Physalaemus), dirt frogs (Craugastor)
(46)
Primer reference Used for
(53)
(53)
(7, 8, 51)
(7, 8, 51)
(48)
(49, 51)
(49, 51)
Studies
Table 1 Selection of primers used for amplifying COI (fragments) in phylogenetic or phylogeographic studies of amphibians with details on taxon specificity and PCR conditions
82 M. Vences et al.
FR1d t1
VF1-d
VR1-d
LepF1
LepRI
BirdF1
BirdR1
BirdR2
“Desmognathus- 5,370 forward”
“Desmognathus- 6,005 reverse”
MVZ_201
Fishes
Fishes
Fishes
Butterflies
Butterflies
Birds
Birds
Birds
Dusky salamanders
Dusky salamanders
Arboreal salamanders (Aneides)
5,408
6,129
6,129
5,408
6,089
5,406
6,089
5,405
6,086
6,086
FishR2 t1
Fishes
TCAACAAAYCATAAA GATATTGGCACC
GTATTAAGATTTCGG TCTGTTAGAAGTAT
CGGCCACTTTACCYR TGATAATYACTCG
ACTACATGTGAGATG ATTCCGAATCCAG
ACGTGGGAGATAATT CCAAATCCTG
TTCTCCAACCACAAA GACATTGGCAC
TAAACTTCTGGATGT CCAAAAAATCA
ATTCAACCAATCATA AAGATATTGG
TAGACTTCTGGGT GGCCRAARAAYCA
TTCTCAACCAACCA CAARGAYATYGG
CAGGAAACAGCTAT GACACCTCAGGG TGTCCGAARAAYC ARAA
CAGGAAACAGCTAT GACACTTCAGGG TGACCGAAGAAT CAGAA
Position Sequence (5¢–3¢)
Primer name
Specificity/origin
F
R
F
R
R
F
R
F
R
F
NA
52
52
49–50
49–50
49–50
45 and 51
45 and 51
45 and 51
45 and 51
(7)
(58)
(58)
(57)
(57)
(57)
(56)
(56)
(55)
(55)
52 used in cocktail (54) (tailed)
R
( 8)
( 8)
( 8)
( 9)
( 9)
( 9)
( 9)
(53)
(53)
Studies
Arboreal salamanders (Aneides)
DNA Barcoding Amphibians and Reptiles (continued)
( 7)
Dusky salamanders (58) (Desmognathus)
Dusky salamanders (58) (Desmognathus)
Malagasy frogs (Mantellidae)
Malagasy frogs (Mantellidae)
Malagasy frogs (Mantellidae)
Various frog and salamander taxa
Various frog and salamander taxa
Various frog and salamander taxa
Various frog and salamander taxa
Clawed frogs (Xenopus)
Clawed frogs (Xenopus)
Primer reference Used for
52 used in cocktail (52) (tailed)
Annealing temperature (°C)
R
Direction
5 83
Primer name
MVZ_202
PP6
PP7
PP8
PP9
COI-1
COI-2
COI-3
COI-4
Specificity/origin
Arboreal salamanders (Aneides)
Physalaemus
Physalaemus
Physalaemus
Physalaemus
Fire-bellied toads
Fire-bellied toads
Fire-bellied toads
Fire-bellied toads
Table 1 (continued)
5,903
6,503
6,503
5,412
6,467
6,467
6,302
6,302
6,695
CCAGCAATGTCAC AATACCAAAC
GACAGAACATAGTGG AAGTGAGCTAC
GATACGACATAGTGG AAGTGGGCTAC
CAAATCACAAAGACA TTGGCACCCT
TCATGTAATACAATG TCTAGAGA
TCTCTAGAYATTGT ATTACATGA
GTTGGAATTGCRAT GATTATTGT TGCAGA
TCTGCAACAATAAT YATYCGCAATT CCAAC
GCGTCWGGGTART CTGAATATCGTCG
Position Sequence (5¢–3¢)
F
R
R
F
R
F
R
F
R
Direction
NA
NA
NA
NA
Internal sequencing primer
Internal sequencing primer
Internal sequencing primer
Internal sequencing primer
NA
Annealing temperature (°C)
(38)
(38)
(38)
(38)
(50)
(50)
(50)
(50)
(7)
Fire-bellied toads (Bombina)
Fire-bellied toads (Bombina)
Fire-bellied toads (Bombina)
Fire-bellied toads (Bombina)
Tungara frogs (Physalaemus)
Tungara frogs (Physalaemus)
Tungara frogs (Physalaemus)
Tungara frogs (Physalaemus)
Arboreal salamanders (Aneides)
Primer reference Used for
(38)
(38)
(38)
(38)
(48)
(48)
(48)
(48)
(7)
Studies
84 M. Vences et al.
6,176 5,908
6,707
COI-6
Cox
Coy
COI-smallF
COI-smallR
KLPf
HmCO1
CO1AXen-H
CO1h-L
CO1g-L
Fire-bellied toads
Australian Litoria frogs
Australian Litoria frogs
Australian frogs (Litoria aurea)
Australian frogs (Litoria aurea)
Australian frogs (Litoria)
South American hylid frogs (Dendropsophus minutus)
South American hylid frogs (Dendropsophus minutus)
Toads (Bufonidae)
Toads (Bufonidae)
TTCATACGTGGTAA CATTTTAGTCAAG
GGAATTATTTCCC AYGTWGTAAC
TGTATAAGCGT CTGGGTAGTC
CGTCACTCAGTA CCAAACCCCC
AAAGAACCTTTT GGTTACATGGG
CAAATACGG CCCCCATAGAT
TTGGCCTGCTA GGTTTTATTG
GGGGTAGTCAG AATAGCGTCG
TGATTCTTTGGG CATCCTGAAG
GCAGGGGTGTCC TCAATTCTAG
TGGTAATTCCTG CAGCAAGAAC
F
F
R
F
F
R
F
R
F
F
R
Direction
NA
NA
NA
NA
NA
(27)
Toads (Bufonidae) (27)
Toads (Bufonidae) (27)
(27)
(63)
(63)
(62)
(37)
South American hylid frogs (Dendropsophus minutus)
South American hylid frogs (Dendropsophus minutus)
Australian frogs (Litoria)
Australian frogs (Litoria aurea)
(37)
(59–61)
(59–61)
(38)
(38)
Studies
(63)
(63)
(62)
Step-down profile: (37) 60, 58, 56, 54
Australian frogs (Litoria aurea)
Australian Litoria frogs
Australian Litoria frogs
(59) (59)
Fire-bellied toads (Bombina)
Fire-bellied toads (Bombina)
(38)
(38)
Primer reference Used for
Step-down profile: (37) 60, 58, 56, 54
NA
NA
NA
NA
Annealing temperature (°C)
Position is given relative to the complete mitochondrial genome sequence of Discoglossus galganoi (GenBank accession number: AY585339). When multiple annealing temperatures are given, it refers to alternative temperatures used in different studies for the same primer or primer combination
5,162
6,137
6,526
6,222
6,695
6,089
5,840
5,984
COI-5
Fire-bellied toads
Position Sequence (5¢–3¢)
Primer name
Specificity/origin
5 DNA Barcoding Amphibians and Reptiles 85
HCO2198
C1-J-1718
C1-J-2191
CO1a
CO1f
COIcXen
COIfXen
COIaXen
COIeXen
Universal
Universal
Universal
Vertebrata
Vertebrata
Vertebrata
Vertebrata
Vertebrata
Vertebrata
6,398
6,539
5,307
5,787
5,898
6,539
5,939
5,466
5,921
CCAGTAAATAAC GGGAATCAGTG
TGTATAAGCGTC TGGGTAGTC
CCTGCCGGAGG AGGTGACCC
TCGTTTGATCAG TATTAATCAC
CCTGCAGGAGGA GGAGAT(orY)CC
AGTATAAGCGTCT GGGTAGTC
CCCGGTAAAATTAAAA TATAAACTTC
GGAGGATTTGGAAA TTGATTAGTTCC
TAAACTTCAGGGT GACCAAAAAATCA
GGTCAACAAATCAT AAAGATATTGG
LCO1490
Universal
5,262
Primer name Position Sequence (5¢–3¢)
Specificity
R
R
F
F
F
R
R
F
R
F
Direction
47
47
47
47
45–58
45–58
42
42
42–45
42–45
Annealing temperature (°C)
(45)
(45)
(45)
(45)
(45)
(45)
(67)
(67)
(28)
(28)
Primer reference
Anolis
Anolis
Anolis
Anolis
Turtle, tortoise, iguana, skink, crocodile
Turtle, tortoise, iguana, skink, crocodile
Lizard
Lizard
Lizard, turtle, gecko
Lizard, turtle, gecko
Used for
(74)
(74)
(74)
(74)
(68–73)
(68–73)
(66)
(66)
(62–64)
(62–64)
Studies
Table 2 Primers used for amplifying COI (fragments) in phylogenetic or phylogeographic studies of reptiles with details on taxon specificity and PCR conditions
86 M. Vences et al.
FishF2_t1
FishR2_t1
FR1d_t1
M13F (221)
M13R (227)
VF1
VR1
RepCOI-F
RepCOI-R
M72
Vertebrata (COI-3 cocktail)
Vertebrata (COI-3 cocktail)
Vertebrata (COI-3 cocktail)
Universal (COI-3 cocktail)
Universal (COI-3 cocktail)
Vertebrata
Vertebrata
Squamata
Squamata
Testudines
5,946
5,921
5,256
5,921
5,262
NA
NA
5,918
5,918
5,265
TGATTCTTCGGTCACCCA GAAGTGTA
ACTTCTGGRTGKCC AAARAATCA
TNTTMTCAACNAACC ACAAAGA
TAGACTTCTGGGTGGCC AAAGAATCA
TTCTCAACCAACCACAAA GACATTGG
CAGGAAACAGCTATGAC
TGTAAAACGACGGCCAGT
[M13R]ACCTCAGGGT GTCCGAARAAYCARAA
[M13R]ACTTCAGGGT GACCGAAGAATCAGAA
[M13F]CGACTAATCAT AAAGATATCGGCAC
[M13F]CAACCAACCAC AAAGACATTGGCAC
VF2_t1
Vertebrata (COI-3 cocktail)
5,265
Primer name Position Sequence (5¢–3¢)
Specificity
F
R
F
R
F
R
F
R
R
F
F
Direction
48 or 55
48.5
48.5
52
NA
(69)
(77)
(77)
(55)
(55)
51.1 5×, then 56.9 (54) 30×
51.1 5×, then 56.9 (54) 30×
51.1 5×, then 56.9 (54) 30×
51.1 5×, then 56.9 (54) 30×
Side-necked turtle
Squamata
Squamata
Boelen’s python, watersnake
Boelen’s python
Crocodile
Crocodile
Crocodile
Crocodile
Crocodile
51.1 5×, then 56.9 (54) 30×
Used for Crocodile
Primer reference
51.1 5×, then 56.9 (54) 30×
Annealing temperature (°C)
(continued)
(69)
(77)
(77)
(75, 76)
(76)
(5)
(5)
(5)
(5)
(5)
(5)
Studies
5 DNA Barcoding Amphibians and Reptiles 87
L-330COI
H-610COI
H-715COI
L-turtCOIc
H-turtCOIc
L-turtCOI
H-turtCOI
H-turtCOIb
L-COIint
H-COIint
Testudines
Testudines
Testudines
Testudines
Testudines
Testudines
Testudines
Testudines
Testudines
Testudines
5,634
5,792
6,119
6,059
5,968
6,066
5,234
5,946
5,843
5,564
TAGTTAGGTCTACAG AGGCGC
TGATCAGTACTTATCAC AGCCG
GTTGCAGATGTAAAA TAGGCTCG
CCCATACGATGAA GCCTAAGAA
ACTCAGCCATCTTA CCTGTGATT
TGGTGGGCTCATAC AATAAAGC
TACCTGTGATTTTAA CCCGTTGAT
GCCAAATCCTGGTAA GATTAAGAT
GTATTTAGGTTTCGGT CAGTGAG
TACTTTTACTCCTAGCC TCCTCAG
CCTATTGATAGGACGTA GTGGAAGTG
M73
Testudines
6,342
Primer name Position Sequence (5¢–3¢)
Specificity
Table 2 (continued)
R
F
R
R
F
R
F
R
R
F
R
Direction
(79)
(79)
(79)
(79)
(79)
(78)
(78)
(78)
(69)
Primer reference
For sequencing only (79)
For sequencing only (79)
56–58
56–58
56–58
56
56
50–54
50–54
50–54
48 or 55
Annealing temperature (°C)
(78)
(78)
(79)
(78)
(78)
(78)
(78)
(78)
(69)
Studies
Yunnan box turtle
(78)
Yunnan box turtle, (74, 78) anoles
Yunnan box turtle
Yunnan box turtle
Turtle
Yunnan box turtle
Yunnan box turtle
Yunnan box turtle
Yunnan box turtle
Yunnan box turtle
Side-necked turtle
Used for
88 M. Vences et al.
CoxIH2
COIf-ot1
COIr-ot2
COIf-ot2
COIr-ot1
L7354
H7794
rTrp–1L
rCOI−1H
LCOI5973
HCOI6576
LCOI5982
HCOI6570
NA
Crocodylia
Crocodylia
Crocodylia
Crocodylia
Crocodylia
Squamata
Squamata
Squamata
Squamata
Squamata
Squamata
Squamata
Squamata
Serpentes
5,222
5,864
5,317
5,921
5,262
6,332
4,879
6,365
5,925
5,871
5,654
5,595
5,891
6,042
R
F
F
R
F
R
R
F
Direction
TCAGCCATACTACCTG TGTTCA
TGCTGGGTCGAAGAA GGTNGT
GGTATAACCGGAACA GCCCTNAGY
TAAACTTCAGGGTGA CCAAAAAATCA
GGTCAACAAATCATAAA GATATTGG
F
R
F
R
F
TAGTGGAARTGKGCTACTAC R
TAAACCARGRGCCTTCAAAG F
ATAATGGCAAATACTGCCCC
TACCAACACCTATTCTGATT
CGAAACYTAAACACTACCTT
CAGCAAGATGAAGGG AGAAGAT
CGCCGGTACAGGATGAAC
TTGGTATAGRATTGGA TCYCC
CCTAAGAAGCCAATTG ATATTATGC
GGCTACTGCCACTAA TAATCGC
CoxIL2
Crocodylia
5,478
Primer name Position Sequence (5¢–3¢)
Specificity
52
50
50
46–50
46–50
48 5×, 58 35×
48 5×, 58 35×
47–55
47–55
NA
(65)
(65)
(65)
(65)
(15)
(15)
(68)
(68)
50–46 touchdown (6)
50–46 touchdown (6)
50–46 touchdown (6)
Snake
Gecko
Gecko
Gecko
Gecko
Gecko, Komodo dragon
Gecko, Komodo dragon
Iguana, lizard
Iguana, lizard
Dwarf crocodile
Dwarf crocodile
Dwarf crocodile
Dwarf crocodile
50–46 touchdown (6)
Dwarf crocodile
Used for
Dwarf crocodile
(6)
Primer reference
(6)
50
50
Annealing temperature (°C)
DNA Barcoding Amphibians and Reptiles
(continued)
(75)
(65)
(65)
(65)
(65)
(15, 81)
(15, 81)
(68, 80)
(68, 80)
(6)
(6)
(6)
(6)
(6)
(6)
Studies
5 89
COI(−)bdeg
COI(+)b
Serpentes
Serpentes
TAAATAATATAAGCTTCT GACTGCTACCACC
ATTATTGTTGCYGCT GTRAARTAGGCTCG F
R
F
Direction
56.5
56.5–65
56.5–65
Annealing temperature (°C)
(83)
(82)
(82)
Primer reference
Snake
Snake
Snake
Used for
(83)
(82)
(82)
Studies
Position is given relative to the complete mitochondrial genome of Furcifer oustaleti (GenBank accession number: NC_008777). When multiple annealing temperatures are given it refers to alternative temperatures used in different studies for the same primer or primer combination
5,535
6,119
AAGCTTCTGACTNCTA CCACCNGC
COI(+)deg1
Serpentes
5,538
Primer name Position Sequence (5¢–3¢)
Specificity
Table 2 (continued)
90 M. Vences et al.
5
DNA Barcoding Amphibians and Reptiles
91
HmCO1/CO1AXen-H
Anura
Cox/KLPf/COI-smallF/COI-smallR/Coy COI-1/COI-2&COI-3/COI-6/COI-4/COI-5 CO1g-L/CO1h-L
Urodela
PP6&PP7/PP8&PP9 MVZ_201/MVZ_202 Desmognathus-forward/-reverse
Vertebrata
BirdF1/BirdR1/BirdR2 LepF1/LepRI VF1-d/FR1d-t1&VR1-d
universal
FishF2-t1&VF2-t1/FishR2-t1 LCO1490/HCO2198 COIf/COIa2/COIa
6000
5500
6500
« Folmer region »
Fig. 1. Some primers used to amplify COI in amphibians sorted according to their specificity (for details, see Table 1). Black triangles represent forward, empty squares reverse primers, respectively. Numbers on the axis refer to the position on the complete mitochondrial genome of Discoglossus galganoi (GenBank accession number: AY585339).
however, are straightforward and similar to those established in other vertebrates (see Note 2). We also provide an overview of selected primers that have thus far been used to amplify COI from amphibians and reptiles, and which should be helpful to design amplification strategies in future DNA barcoding studies targeting these animals. To obtain this compilation of primers, we focused on studies where the COI gene as a molecular genetic marker was targeted, in particular, the standard animal barcoding region, the so-called Folmer region (28).
2. Materials 2.1. DNA Extraction and Preservation (See Note 3)
1. For routine DNA barcoding, we recommend a salt extraction protocol. 2. Extraction buffer: 0.01 M Tris–HCl (pH 8.0), 0.1 M NaCl, 0.01 EDTA (pH 8.0) in dH2O.
92
M. Vences et al.
COI(+)b/COI(+)deg1/COI(-)bdeg
Serpentes
Squamata
LCOI5973/LCOI5982/HCOI6570/HCOI6576 rTrp–1L/rCOI–1H L7354/H7794
Testudines
CoxIL2/COIr-ot2/COIf-ot2/COIr-ot1/COIfCrocodylia ot1/CoxIH2 L-turtCOIc/H-COIint/L-COIint/L-turtCOI/HturtCOI/H-turtCOIc/H-turtCOIb L-330COI/H-610COI/H-715COI M72/M73
Reptiles
RepCOI-F/RepCOI-R
Vertebrata
VF2(t1)/FR1d(t1) FishF2(t1)/FishR2(t1) F<Makowsky/VF1/VR1 COIfXen/COIcXen/COIaXen/COIeXen
universal
CO1f/CO1a C1-J-1718/C1-J-2191 LCO1490/HCO2198
« Folmer region » 5000
5500
6000
6500
Fig. 2. Some primers used to amplify COI in reptiles sorted according to their specificity (for details, see Table 2). Black triangles represent forward, empty squares reverse primers, respectively. Numbers on the axis refer to the position on the complete mitochondrial genome of Furcifer oustaleti (GenBank accession number: NC_008777).
3. Proteinase K: 4.5 U/ml solution, typically corresponds to 0.15 mg/ml. 4. SDS: 10% solution in dH2O (10 g SDS in 100 ml dH2O). 5. NaCl solution: 5 M NaCl in dH2O. 6. Isopropanol: absolute; cooled in a freezer. 7. Ethanol: 80% solution. 8. DNA elution buffer: 100 mM Tris–HCl pH 8.0. 9. Preservation of the DNA extracts can be done at (ultra) deep temperature or using dry storage systems at room temperature (e.g., GenVault or GenTegra systems, both GenVault Corp.). 2.2. PCR Amplification and Sequencing (See Note 4)
1. dH2O. 2. Reaction buffer (5 or 10×, supplied with Taq polymerase by the respective manufacturer). 3. dNTPs: 10 mM. 4. Forward primer: 10 mM. 5. Reverse primer: 10 mM.
5
DNA Barcoding Amphibians and Reptiles
93
6. Taq polymerase: 5 U/ml. 7. DNA. 8. SAP (Shrimp Alkaline Phosphatase): 10 U/ml (Promega). 9. EXO-nuclease I: 10 U/ml (NEB). 10. BigDye Terminator v1.1 (Applied Biosystems by Life Technologies) diluted 5×. 11. ABI sequencing buffer: supplied as 5× buffer with BigDye. 12. Sequencing primer: 0.4 mM. 2.3. Collection and Hygiene
1. Sodium hypochlorite: 5% solution, diluted to 1% as needed.
3. Methods 3.1. Sample Collection
For amphibians and reptiles, a broad spectrum of tissue samples can be used for the DNA extraction, amplification, and sequencing of the DNA barcoding process. Because of the large number of undescribed species in speciesrich tropical regions (refs. 29, 30 for amphibians), it is advisable to integrate any DNA barcoding study on tropical amphibians and reptiles with adequate collection of representative voucher specimens for subsequent taxonomic study. In some cases, however, the killing of the animals and their deposition in public collections is undesirable or impossible; for instance, in critically endangered species where populations are so small that reducing the population size by even single individuals infers a serious further threat (e.g., in some tortoises), or when collection permits for whole specimens could not be obtained. In such cases, blood samples (most reptiles with middle to large body size), tail tips (e.g., lizards and snakes), toe clips (frogs and salamanders), fin clips (aquatic salamanders and tadpoles), and scale clips (snakes) can be taken. In moderate- to large-sized specimens, buccal saliva swabs give good results. However, in small-sized specimens, especially amphibians, it needs to be considered that introducing such a swab in the mouth is probably more stress and harmful to the animal than the superficially more invasive method of toe clipping. Swabs can be air-dried and then stored, but in humid environment, storage in pure ethanol is preferable. A further alternative source of DNA are the exuviae (shed skin, especially of snakes) but if encountered in the wild, the identity of the specimen will not always be ascertainable. For dead animals including museum specimens that have not been fixed using formalin, liver, heart, or muscle tissues represent optimal sources of genomic, and especially mitochondrial genomic DNA. In general, ethanol-fixed and ethanol-preserved museum
94
M. Vences et al.
specimens of amphibians and reptiles can be suitable for DNA extraction and barcoding if they are up to 10–20 years old. Older specimens might also yield DNA, but success rate becomes very low and usually it is strongly advisable to collect fresh samples. Dry specimens (like tortoise shells or nontreated skins) typically still have tiny rests of dried original soft tissue attached, and these might yield appropriate genomic DNA even from older specimens. Cut a small piece (at least 100 mg) of tissue or take blood or buccal swab samples and make sure that the preservation method of your choice enables the maintenance of high-quality genomic DNA over long period. For a commented overview of the available common collection, sampling, and preservation methods, see ref. 31. Usually, most tissue samples could be kept in absolute ethanol and/ or in frozen state (preferably at ultra low temperature) for longer periods. The proper and permanent marking as well as the easy traceability of the samples is of central importance. 3.2. Tadpole Sampling
Based on recent large-scale studies in Madagascar (32), we propose the following work protocol in sampling (see Note 5): 1. In the field, collect tadpoles from a water body exhaustively (if semiquantitative data are needed, follow a particular plot or transect sampling design). 2. Kill the collected tadpoles using a chlorobutanol or MS222 solution. Using a magnifying glass or field stereo microscope, sort them into morphospecies according to easily recognizable external characters (size, color, oral disk, and body shape). Make sure to make 1–2 duplicate series of each morphospecies to have a better chance to sample cryptic species. 3. From each series, select one representative specimen and take an obvious tissue sample (e.g., a triangular piece of the tail muscle) and store it in pure ethanol. Fix and preserve the sampled specimen with the rest of the series in an equal mixture of 4% buffered formalin and 70% ethanol (formalin fixation is important for subsequent morphological study). 4. After species identification through DNA barcoding, the morphology of the tadpole is studied on the basis of the barcoded voucher specimen (identifiable because of tissue sampling). The remaining specimens of a series (of which identification was not ascertained) are used to describe variation. 5. When collecting of tadpoles is not possible or desired, the same protocol can be carried out with subsequent release of the specimens. However, sorting living tadpoles into morphospecies can be difficult. The DNA voucher specimen that will be sampled for tissue (a clip of the dorsal or terminal part of the caudal fin) should be photographed. Not much experience on anesthetizing tadpoles is available, but it should be possible with appropriate dosage of MS222, as is common practice with fishes.
5
3.3. Documentation (See Note 6)
DNA Barcoding Amphibians and Reptiles
95
1. Whenever samples are collected, documentation of color in life should be a crucial component of each study. Digital photos should be made both of dorsal and ventral sides. If voucher specimens are collected, the photos will later serve to know their life color since many amphibians and lizards (like colorful geckos or chameleons) will lose their color within hours in preservative (and sometimes in life while being handled). 2. If voucher specimens are not collected, photographic documentation becomes even more important and should include lateral, dorsal, and ventral photos as well as close-ups (e.g., of head and ventral sides of hands and feet), to make sure diagnostic characters will be recognizable and allow to subsequently verify species identification of barcoded specimens. 3. In frogs, vocalizations are essential to identify and describe cryptic species, and whenever possible advertisement calls should be documented. Because in species-rich tropical communities often many frog species call from the same sites, it is essential to observe the calling specimen during emission of the calls, i.e., to observe the movement of the vocal sac. If this can be achieved, this “call voucher” specimen should be collected separately, documented photographically, and its call recording and tissue sample marked unambiguously. 4. Often it is preferable to obtain and barcode one or a few welldocumented specimens with linked bioacoustic data than to collect large series of specimens without any further biological information.
3.4. Hygiene Protocols (See Notes 7 and 8)
Due to the spread of amphibian diseases causing drastic declines (33), the application of strict hygiene protocols is advisable in many cases, especially when researchers move among different sites. 1. Amphibians can be handled using bare hands as long as the handler washes their hands between amphibians in water to which the animals would normally be exposed; this will ensure that the risks to frogs of exposure are not increased above environmental levels. 2. If no water is available for washing hands between amphibians, and in situations where possible disease transmission could be an issue, the handler should wear unused disposable gloves, or wear an unused plastic bag, or wipe their hands with a sterilizing alcohol-based hand disinfectant between amphibians. 3. If amphibians are held in a container prior to return to the wild, the container should not have previously have been used for holding other amphibians, or if previously used, the container should be disinfected prior to use. 4. Surgical instruments, such as scissors used for toe tip clipping, should be sterilized between amphibians by chemical disinfection
96
M. Vences et al.
by either 70% ethanol or 1 mg/L Vircon (Dupont) for 1 min (both alternatives are effective against chytrid and ranaviruses, see also refs. 34, 35). 5. Nonsurgical equipment used in a stream or water body should be disinfected prior to use in any other water bodies. Footwear should be washed to remove any mud and disinfected prior to being used in a separate water catchment or water body isolated from the initial water body. For disinfection, the easiest options are bleach (sodium hypochlorite; 1% for 1 min effective against chytrid; 4% for 15 min effective against chytrid and ranaviruses), complete drying for at least 3 h or heating to 37°C for 4 h (only chytrid), or heating to 60°C for 15 min (chytrid and ranaviruses). Clothes will be appropriately disinfected if washed at 60°C for at least 15 min. 3.5. Sampling to Test for Infection with Batrachochytrium dendrobatidis
The following protocol was developed (34) to allow field biologists to nondestructively sample amphibians in the field to test for infection with Batrachochytrium dendrobatidis. It was published in Amphibiaweb (1) by Vredenburgh and Briggs, and is here reproduced in a slightly condensed format. 1. Use swabs as described below for buccal swabbing of amphibians and reptiles (Medical Wire and Equipment, catalog number MW113), and as vials, sterilized screw cap 1.5 ml microcentrifuge tubes. 2. Preferably, capture amphibians by hand. Wear gloves when swabbing animals and change gloves between animals. If you are using a dip net, be aware that B. dendrobatidis zoospores could be caught on the net and transferred between individuals; therefore, use different nets whenever possible or disinfect the net as often as you can (there is no perfect solution to this problem). 3. Swab the underside or ventrum of adult/metamorphs 30 times. Remember you are in effect scraping small amounts of tissue from the skin. Some pressure must be applied, but this does not mean that you must squash the animal. Areas to target are the drink patch, thighs, and webbing between the toes. 4. Air dry the swab for approximately 5 min, avoid direct sunlight if possible (if conditions are too humid to air dry then store in 95% EtOH). 5. Break swab ~3 cm from tip and drop into empty screw cap tube. The swab stick should not touch or bump against the top of the vial. Screw the cap on the vial and store in the shade. 6. Samples can be kept at room temperature for a week or maybe longer, but it is best to keep the samples cool and placed as soon as possible in a 4°C freezer. Avoid extreme high temperature and direct sunlight. Samples may be stored in a freezer for many months without problems.
5
3.6. Tissue Sampling and DNA Extraction After (36) (see Also Notes 9 and 10)
DNA Barcoding Amphibians and Reptiles
97
Tissue sampling for DNA barcoding amphibians and reptiles is similar to any sampling procedure for genetic analysis, and the protocol given here is one example of such procedures (see Note 3). Use appropriate dissecting tools such as scalpel, scissors, pins, or forceps to remove a solid tissue sample from the specimen. Collecting buccal saliva swabs of larger specimens can be done with small sterile swabs, such as those available from Medical Wire and Equipment, http://mwe-usa.com/mwe/mwe.php, product code MW113. Use bleach or a flame to sterilize your tools before each sampling. Storage vials labeled with unique laser-etched 2D barcode (e.g., ABgene 2D Barcoded 2 ml Screw Cap Tubes—Thermo Scientific) can be used to securely identify and track samples. 1. Cut a small piece of tissue of about 1 mm3 from the original sample and put it into a clean 1.5-ml microtube. Add 410 ml extraction buffer (see Subheading 2.1), 80 ml 10% SDS, and 10 ml proteinase K solution. 2. Let the sample incubate at 37°C in the thermo mixer (up to 65°C to accelerate the lysis process). After the tissue is completely dissolved, vortex the sample. Depending on the fixation of the tissue, this may take between 3 and 12 h (see Note 10). 3. Centrifuge tubes with dissolved tissues for 5 min at maximum speed (typically 8000–15000 × g force), then transfer the supernatant into a new 1.5 ml tube and add 180 ml NaCl (5 M). Vortex for at least 30 s. 4. Centrifuge for 5 min at maximum speed. Transfer the supernatant quickly into a clean 1.5 ml tube and quickly add 420 ml cold Isopropanol (mix by gently inverting the tube several times). Centrifuge for 5 min at maximum speed, to pellet the DNA, then discard the supernatant. Now you will have your DNA pellet (may be not visible) at the bottom of the tube. Wash the pellet by adding 250 ml 80% EtOH, mix by gently inverting the tube several times, and centrifuge 5 minutes at full speed. 5. Repeat the EtOH washing from step 4 once. 6. Carefully remove all alcohol and let the pellet dry for 20 min in a thermoblock at 37°C, after opening the lids of the microcentrifuge tubes. 7. Rehydrate the DNA by adding 100 ml ddH2O (or in a DNA elution buffer), and leave it overnight at room temperature. Freeze the DNA at –20°C. 8. Quantity and purity of the extracted DNA can be evaluated with a spectrophotometer (e.g., NanoDrop ND-1000 spectrophotometer, NanoDrop Technologies) where only a small
98
M. Vences et al.
amount (1–2 ml) of the DNA extract is needed. Potential degradation of the DNA can be visualized with agarose gel electrophoresis (3–5 ml DNA solution is loaded on an 1.2% agarose gel, and stained with GelRed or ethidium-bromide). 3.7. PCR and Sequencing of the COI Fragment (see Notes 11 and 12)
1. For each 10 ml PCR mix, the following: 6.44 ml dH2O, 2.0 ml 5× reaction buffer, 0.2 ml 10 mM dNTPs, 0.24 ml each of 10 mM forward and reverse primer, 0.08 ml Taq, and 0.8 ml DNA. 2. The typical profile of the PCR consists of an initial denaturation of the DNA at 94°C for 3–5 min, 35–40 cycles of denaturation at 94°C for 30–45 s, annealing for 30–45 s and extension at 72°C for 60–90 s, and a final extension at 72°C for 7 min. 3. The annealing temperature depends on the primers and can vary among the cycles if a touchdown protocol is used (Table 1, see also Note 12). Some authors have cloned the obtained PCR products before sequencing, but usually direct amplification, and direct sequencing with the same primers, is sufficient and is the routine method applied in most cases.
3.8. Purification of the PCR Products
Purification can be performed rapidly and cost-efficiently on a special 96-well plate using the NucleoFast 96 PCR Plate (MachereyNagel) and the NucleoVac 96 Vacuum manifold (Macherey-Nagel). Alternatively, a very fast and cost-effective purification can be performed using the EXO-SAP method that uses shrimp alkaline phosphatase and EXO-nuclease 1 (e.g., available through Promega). The following is a recipe to generate 6.5 ml cleaned product. If more or less product is needed, volumes need to be adjusted accordingly (e.g., if only 0.5–2.5 ml of the product are needed per sequencing reaction, cut the recipe by half ). 1. Per sample use 1.125 U SAP (Shrimp Alkaline Phosphatase— Promega), 1.2 U EXO-nuclease I (NEB), and dH2O to make up 1.5 ml. 2. Make a master mix for all PCR products you want to purify (or more to prepare a stock). 3. Fill 5 ml per PCR product into 0.2 ml (strip) tubes. 4. Add 1.5 ml Exo-SAP master mix to each tube with 5 ml PCR product. 5. Centrifuge briefly. 6. Place tubes in a thermocycler: 15 min at 37°C followed by 15 min at 80°C (to destroy the enzyme). 7. The samples are now purified, and ready for use as sequencing reaction template.
5
3.9. Usage of the 16S rRNA Gene as Complementary Barcoding Marker (see Note 13)
DNA Barcoding Amphibians and Reptiles
99
COI has been well established as the universal DNA barcoding marker to be used and we endorse completing the reference database of this gene in amphibians and reptiles. As a complement, and an alternative for specific barcoding applications, a specific fragment of the mitochondrial 16S rRNA gene has been proposed (7, 8). This gene fragment has three advantages that can be decisive in some cases: (a) the existing reference database for amphibians and reptiles is much more taxon-rich; (b) while for COI often species-specific primers need to be developed (e.g., refs. 37, 38), truly universal primers exist for 16S; and (c) because the phylogenetic signal in the gene is stronger, even with incomplete taxon sampling in the reference database, identification of species to higher clades (families, genera, and subgenera) is more reliable. The most comprehensive and taxon-rich studies published by various researcher teams to reconstruct the amphibian tree of life have been based at least partly on mitochondrial genes (39–44). However they did not include COI as target gene but instead included fragments or complete sequences of the 16S rRNA and 12S rRNA genes. The total number of amphibian 16S sequences in GenBank is therefore considerably higher than that of COI sequences, although in recent times, COI datasets have been produced for several taxon-rich studies (10). The situation is similar for reptiles although 12S and 16S are less universally used in taxonrich phylogenetic studies. These often employ ND1, ND2, ND4, and cytochrome b. In general, many more amphibian and reptile taxa have been sequenced for 16S rRNA which for some purposes (such as identification of bushmeat that might originate from amphibians and reptiles or from other vertebrates) may be a suitable complementary marker, at least until a more comprehensive COI reference database becomes available. Several universal primers for the 12S and 16S rRNA genes exist (e.g., refs. 45, 46) of which one pair has been used with particular frequency in amphibian and, to a lesser extent, reptile studies (e.g., refs. 10, 29, 32, 47), and has been recommended for DNA barcoding (7, 8). The primers 16SrA-L (5¢-CGC CTG TTT ATC AAA AAC AT-3¢) and 16SrB-H (5¢-CCG GTC TGA ACT CAG ATC ACG T-3¢), which often are named 16SA-L and 16SB-H, amplify a 500–550 bp stretch of the 3¢ portion of 16S reliably across vertebrates, from fishes to mammals, with low failure rates in most taxa. An annealing temperature of 55°C is recommended but the primer pair will work with a large array of PCR protocols. In amphibians, observed failure rates were 1.3% (10) and 0% (8). This short fragment of 16S furthermore performs better to reconstruct relationships among deep lineages of vertebrates (8). Therefore it is more reliable to assign species that are not represented in the COI database to the correct major lineages. However, as the COI reference database is becoming more complete, this disadvantage of COI will disappear in due time.
100
M. Vences et al.
4. Notes 1. Especially in amphibians, the age of species in many genera will easily be of several million years, and even conspecific lineages are often highly divergent. On the one hand, this can lead to failure even of specific primers when previously unknown deep lineages are sampled. On the other hand, it also implies that successful species assignment of sequences will strongly depend on the completeness of the reference database (7, 8, 47). 2. One PCR protocol for COI in amphibians (48) also included cutting of bands from agarose gels and resuspending these for a second round of PCR. 3. Extraction of total genomic DNA from amphibian and reptile samples does not require specific methods. Any other DNA extraction protocol used in other vertebrates (e.g., fish and birds) may be suitable as well. A variety of methods (salt, phenol–chloroform, and Chelex) have been successfully used to extract DNA from amphibian and reptile tissue samples. Alternatively, it is possible to use spin columns containing silica membranes that are able to reversibly bind DNA by differential affinity. This technique is fast, easy, and provides a clean product that is well suitable for further applications like PCR and sequencing. Commercial kits such as the NucleoSpin® Tissue kit (Macherey-Nagel) or the DNeasy® Blood and Tissue kit (Qiagen) provide all components for the lysis of the tissue samples and the subsequent extraction of genomic DNA. DNA extraction protocols using spin columns with silica membranes typically include four steps: tissue lysis, DNA precipitation and binding to the silica membrane, washing, and elution of the isolated DNA (for a more detailed protocol, see the respective manufacturer’s protocol). 4. Typically, a PCR mix (e.g., total volume of 25 ml) consists in (final concentration): Taq DNA polymerase (0.03 U/ml), PCR buffer 1× containing MgCl2 (1.5 mM), dNTPs (0.2 mM each), forward and reverse primers (0.2 mM each), and DNA (ca. 20–80 ng) and ultrapure water (dH2O; ad 25 ml). For routine amplification and large series, reaction volumes can be decreased to 10 ml. 5. The larvae of frogs (tadpoles) are often encountered in large quantities and densities in water bodies, especially in speciesrich tropical frog communities. For many frog species, the tadpoles are unknown and have not been morphologically described. Furthermore, tadpoles of related species can be externally similar to each other while the unknown amount of variability through phenotypic plasticity will complicate matters even more. Field identification of tadpoles is therefore often
5
DNA Barcoding Amphibians and Reptiles
101
difficult and unreliable. We therefore suggest using DNA barcoding as a strategy to identify tadpoles to species. Because of the high numbers of individuals that are usually collected, DNA barcoding of each individual is often not possible. 6. We reiterate that proper documentation (including photo documentation of the specimens) of the whole DNA barcoding process is of central importance (see Meyer et al. on LIMS, this volume). 7. In general, during field trips that successively lead to various geographically separated areas, care should be taken to avoid spreading diseases of amphibians and reptiles, and of course also of other animals, among sites and populations. In general, all equipment and clothing should be reasonably cleaned to avoid introducing pathogens as well as seeds of any nonnative organisms, especially invasive plants or insects. In amphibians, these general precautionary measures need to be intensified because of the worldwide spreading of an emergent infectious disease, chytridiomycosis, caused by the amphibian chytrid fungus, Batrachochytrium dendrobatidis. This pathogen has already led to dramatic declines and extinctions (33), and researchers working with amphibians must follow strict safety protocols to avoid its further spreading. We here summarize (a) in Section 3.4 a general hygiene protocol for amphibian studies that will avoid the spread of chytrid fungus as well as other amphibian pathogens and (b) in Section 3.5 a protocol to collect samples from amphibian specimens in the wild which subsequently can be tested for chytrid infection using molecular methods. For the latter, typically real-time PCR (34) rather than COI barcoding is used, and we will not further describe the lab methods here. 8. The information and recommendations to avoid spreading of amphibian diseases, especially chytridiomycosis and ranaviruses, among amphibian populations are excerpts, with few modifications, from a hygiene protocol developed by Speare et al. (35). Handling of amphibians should be done in a manner that does not significantly increase their risks of exposure to infectious disease above those normally experienced in the absence of handling. People handling amphibians should not be expected to reduce risks below the natural level for those amphibians. However, current data do not indicate that scientific activities have so far played a significant role in the transmission of chytridiomycosis or other pathogens of amphibians in the wild in Australia or any other country. There is no evidence that the amphibian chytrid fungus or other pathogens of amphibians have been transmitted between water catchments by vehicles, footwear, or clothing.
102
M. Vences et al.
As the amphibian chytrid fungus is extremely sensitive to temperatures above 29°C and will die at 32°C, it will not grow on human skin. Ranaviruses, the other major pathogen of amphibians, also show sensitivity to temperature, being unable to grow above 33°C. Complete drying will kill the amphibian chytrid fungus, but will not kill ranaviruses. The greatest risk of transmission of infectious agents is when amphibians are placed together in contact or in the same container or in containers reused for holding amphibians without disinfection between specimens. The practical recommendations in section 3.4 above are especially relevant when traveling between localities or even between countries. 9. The DNA extraction protocol presented here is robust against variation of numerous parameters, such as the amount of tissue (which can be distinctly less or at least up to five times more than recommended) or the relative centrifugal force. If final DNA concentration is too high, it can be a source of PCR problems; in this case, try to dilute DNA by 1–3 orders of magnitude. 10. For DNA extraction of samples that are very small (less than 5 mg) and/or old (more than 10 years) and/or mainly consisting of hard tissue (e.g., scales of reptiles), the lysis period could be prolonged (up to 48 h) and the elution volume reduced (ca. 70 ml). For older specimens (dry samples like turtle or tortoise shells or nontreated skins), a dedicated ancient DNA lab and verification of the results at least in one additional lab is strongly advised. Protocols for extracting, amplifying, and sequencing true ancient DNA, not restricted to amphibians and reptiles, are a burgeoning field of study with numerous new and recent developments, and will not be discussed here. 11. So far, no truly universal COI primers for either amphibians or reptiles have been proposed, and due to the deep divergences among species and higher taxa in these groups, it is unlikely that such primers can be ever developed (7, 8). In amphibians, failure rates of 50–70% of individual primer pairs have been observed (8) which however were not designed for amphibians. By contrast, our own experiences with Malagasy squamate reptiles yielded rather low failure rates of about 15% for a single— newly designed and degenerated—primer pair (RepCOI-F, RepCOI-R; see Table 2). In general, failure rates can be strongly reduced by using primer cocktails or by using a hierarchical approach in which first all samples are amplified with the most promising primer pair, and the ones that failed are subsequently amplified with the next alternative primer pair, and so on, for at least 3–4 primer pairs if the samples are important. 12. The most comprehensive COI barcoding study in amphibians to date (10), with 300 individuals corresponding to 63 named species and various undescribed candidate species, used a mix
5
DNA Barcoding Amphibians and Reptiles
103
of primers and reported a failure rate of 7.7% for the COI primers. To overcome the problem of failure or poor performance of universal primers, several authors of phylogeographic studies have followed a strategy to design species-specific or genus-specific primers, either on the basis of previous sequences obtained by more universal primers or on available full mitochondrial genome sequences (e.g., refs. 37, 38). This approach could also be useful in DNA barcoding studies that target limited numbers of closely related species. 13. One possible major shortcoming of DNA barcoding with the 16S gene and universal primers might be a particular sensitivity of the PCR to primer or template DNA degradation and other artifacts. In several labs, we have observed that the universal primer pair suggested here, although of high reliability, can suddenly switch to producing PCRs with unspecific fragment lengths (visible as smear rather than sharp bands on agarose gels). This problem often persisted despite usage of newly synthesized primers and fresh PCR reagents and might relate to degradation of DNA (of the primers or of the template DNA) in which case this primer pair might be particularly prone to amplify fragments of different length. In some cases, this problem can be alleviated by strongly diluting the template DNA. Although we have occasionally encountered similar problems with protein-coding genes or more specific 16S primers, it occurred more frequently with universal primers. In forensic studies, such as the analysis of bushmeat, which might originate from an amphibian or reptile species but could also be from a mammal, bird, or fish, it probably is more advisable to use a primer cocktail for COI and complement this with a second PCR using the universal vertebrate primers for 16S (see below), given that very large comparative data are also available for this mitochondrial fragment for basically all vertebrate groups. 14. While this book was in press, two new pairs of COI primers specifically aimed at amphibians were published (84). These primers, Chmf4 (TYT CWA CWA AYC AYA AAG AYA TCG G) / Chmr4 (ACY TCR GGR TGR CCR AAR AAT CA), and COIC02 (AYT CAA CAA ATC ATA AAG ATA TTG G) / COI-C04 (ACY TCR GGR TGA CCA AAA AAT CA), will likely facilitate DNA barcoding campaigns in amphibians as they had high success rate in many disparate taxonomic groups of amphibians.
Acknowledgment We thank the Belgian Science Policy Office for supporting the Joint Experimental Molecular Unit.
104
M. Vences et al.
References 1. AmphibiaWeb (2010) Information on amphibian biology and conservation [Web application]. AmphibiaWeb, Berkeley, CA. http:// www.amphibiaweb.org/. Accessed 1 Feb 2012 2. Uetz P, Goll J, Hallermann J (2010) The reptile database [web application]. http://www. reptile-database.org/. Accessed 1 Nov 2010 3. Vargas SM, Araújo FCF, Santos FR (2009) DNA barcoding of Brazilian sea turtles (Testudines). Genet Mol Biol 32:608–612 4. Naro-Maciel E, Reid B, Fitzsimmons NN et al (2010) DNA barcodes for globally threatened marine turtles: a registry approach to documenting biodiversity. Mol Ecol Res 10:252–263 5. Eaton MJ, Meyers GL, Kolokotronis SO et al (2010) Barcoding bushmeat: molecular identification of Central African and South American harvested vertebrates. Conserv Genet 11:1389–1404 6. Eaton MJ, Martin A, Thorbjarnarson J, Amato G (2009) Species-level diversification of African dwarf crocodiles (Genus Osteolaemus). A geographic and phylogenetic perspective. Mol Phylogenet Evol 50:496–506 7. Vences M, Thomas M, Bonett RM, Vieites DR (2005) Deciphering amphibian diversity through DNA barcoding: chances and challenges. Phil Trans R Soc Lond 360:1859–1868 8. Vences M, Thomas M, van der Meijden A et al (2005) Comparative performance of the 16S rRNA gene in DNA barcoding of amphibians. Front Zool 2:5 9. Smith MA, Poyarkov NA Jr, Hebert PDN (2008) CO1 DNA barcoding amphibians: take the chance, meet the challenge. Mol Ecol Res 8:235–246 10. Crawford AJ, Lips KR, Bermingham E (2010) Epidemic disease decimates amphibian abundance, species diversity, and evolutionary history in the highlands of central Panama. Proc Natl Acad Sci USA 107:13777–13782 11. Padial JM, de la Riva I (2007) Integrative taxonomists should use and produce DNA barcodes. Zootaxa 1586:67–68 12. Padial JM, Miralles A, de la Riva I, Vences M (2010) The integrative future of taxonomy. Front Zool 7:e16 13. Kozak KH, Larson A, Bonett RM, Harmon LJ (2005) Phylogenetic analysis of ecomorphological divergence, community structure, and diversification rates in dusky salamanders, Desmognathus. Evolution 59:2000–2016 14. Weisrock DW, Papenfuss TJ, Macey JR et al (2006) A molecular assessment of phylogenetic relationships and lineage accumulation rates
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
within the family Salamandridae (Amphibia, Caudata). Mol Phylogenet Evol 41:368–383 Kumazawa Y, Endo H (2004) Mitochondrial genome of the Komodo dragon: efficient sequencing method with reptile-oriented primers and novel gene rearrangements. DNA Res 11:115–125 Kumazawa Y (2004) Mitochondrial DNA sequences of five squamates: phylogenetic affiliation of snakes. DNA Res 11:137–144 Dong S, Kumazawa Y (2005) Complete mitochondrial DNA sequences of six snakes: phylogenetic relationships and molecular evolution of genomic features. J Mol Evol 61:12–22 Parham JF, Feldman CR, Boore JL (2006) The complete mitochondrial genome of the enigmatic bigheaded turtle (Platysternon): description of unusual genomic features and the reconciliation of phylogenetic hypotheses based on mitochondrial and nuclear DNA. BMC Evol Biol 6:11 Macey JR, Kuehl JV, Larson A et al (2008) Socotra Island the forgotten fragment of Gondwana: unmasking chameleon lizard history with complete mitochondrial genomic data. Mol Phylogenet Evol 49:1015–1018 Okajima Y, Kumazawa Y (2009) Mitogenomic perspectives into iguanid phylogeny and biogeography: Gondwanan vicariance for the origin of Madagascan oplurines. Gene 441:28–35 Okajima Y, Kumazawa Y (2010) Mitochondrial genomes of acrodont lizards: timing of gene rearrangements and phylogenetic and biogeographic implications. BMC Evol Biol 10:141 Mueller RL, Macey JR, Jaekel M et al (2004) Morphological homoplasy, life history evolution, and historical biogeography of plethodontid salamanders inferred from complete mitochondrial genomes. Proc Natl Acad Sci USA 101:13820–13825 San Mauro D, Gower DJ, Oommen OV et al (2004) Phylogeny of caecilian amphibians (Gymnophiona) based on complete mitochondrial genomes and nuclear RAG1. Mol Phylogenet Evol 33:413–427 Zhang P, Papenfuss TJ, Wake MH et al (2008) Phylogeny and biogeography of the family Salamandridae (Amphibia: Caudata) inferred from complete mitochondrial genomes. Mol Phylogenet Evol 49:586–597 Zhang P, Zhou H, Chen YQ, Liu YF, Qu LH (2005) Mitogenomic perspectives on the origin and phylogeny of living amphibians. Syst Biol 54:391–400
5 26. Kurabayashi A, Sumida M (2009) PCR primers for the Neobatrachian mitochondrial genome. Curr Herpetol 28:1–11 27. Goebel AM, Donnelly J, Atz M (1999) PCR primers and amplification methods for the 12S ribosomal DNA, cytochrome oxidase I, cytochrome b, the control region in bufonids and other frogs and an overview of PCR primers available for analyses of amphibians. Mol Phylogenet Evol 11:163–199 28. Folmer OM, Black W, Hoeh R et al (1994) DNA primers for amplification of mitochondrial cytochrome c oxidase subunit I from diverse metazoan invertebrates. Mol Mar Biol Biotechnol 3:294–299 29. Vieites DR, Wollenberg KC, Andreone F et al (2009) Vast underestimation of Madagascar’s biodiversity evidenced by an integrative amphibian inventory. Proc Natl Acad Sci USA 106:8267–8272 30. Fouquet A, Gilles A, Vences M et al (2007) Underestimation of species richness in Neotropical frogs revealed by mtDNA analyses. PLoS One 2:e1109 31. Nagy ZT (2010) A hands-on overview of tissue preservation methods for molecular genetic analyses. Org Divers Evol 10:91–105 32. Strauss A, Reeve E, Randrianiaina RD et al (2010) The world’s richest tadpole communities show functional redundancy and low functional diversity: ecological data on Madagascar’s streamdwelling amphibian larvae. BMC Ecol 10:12 33. Wake DB, Vredenburg VT (2008) Are we in the midst of the sixth mass extinction? A view from the world of amphibians. Proc Natl Acad Sci USA 105:11466–11473 34. Boyle DG, Boyle DB, Olsen V et al (2004) Rapid quantitative detection of chytridiomycosis (Batrachochytrium dendrobatidis) in amphibian samples using real-time Taqman PCR assay. Dis Aquat Organ 60:141–148 35. Speare RL, Berger LF, Skerratt RA et al (2004) Hygiene protocol for handling amphibians in field studies. Amphibian Disease Group, James Cook University, Townsville, Australia. http:// www.jcu.edu.au/school/phtm/PHTM/ frogs/field-hygiene.pdf 36. Bruford MW, Hanotte O, Brookfield JFY, Burke T (1992) Single-locus and multilocus DNA fingerprint. In: Hoelzel AR (ed) Molecular genetic analysis of populations: a practical approach. IRL Press, Oxford, pp 225–270 37. Burns EL, Eldridge MDB, Crayn DM, Houlden BA (2007) Low phylogeographic structure in a widespread endangered Australian frog Litoria aurea (Anura: Hylidae). Cons Genet 8:17–32
DNA Barcoding Amphibians and Reptiles
105
38. Zheng Y, Fu J, Li S (2009) Toward understanding the distribution of Laurasian frogs: a test of Savage’s biogeographical hypothesis using the genus Bombina. Mol Phylogenet Evol 52:70–83 39. Darst CR, Cannatella DC (2004) Novel relationships among hyloid frogs inferred from 12S and 16S mitochondrial DNA sequences. Mol Phylogenet Evol 31:462–475 40. Frost DR, Grant T, Faivovich J et al (2006) The amphibian tree of life. Bull Am Mus Nat Hist 297:1–370 41. Heinicke MP, Duellman WE, Hedges SB (2007) Major Caribbean and Central American frog faunas originated by ancient oceanic dispersal. Proc Natl Acad Sci USA 104:10092–10097 42. Wollenberg KC, Vieites DR, van der Meijden A et al (2008) Patterns of endemism and species richness in Malagasy cophyline frogs support a key role of mountainous areas for speciation. Evolution 62:1890–1907 43. Santos JC, Coloma LA, Summers K et al (2009) Amazonian amphibian diversity is primarily derived from late Miocene Andean ancestors. PLoS Biol 7:1–14 44. Van Bocxlaer I, Loader SP, Roelants K et al (2010) Gradual adaptation toward a rangeexpansion phenotype initiated the global radiation of toads. Science 327:679–682 45. Palumbi S, Martin A, Romano S et al (1991) The simple fool’s guide to PCR. Department of Zoology, University of Hawaii, Hawaii 46. Kessing B, Croom H, Martin A et al (1989) The simple fool’s guide to PCR. Department of Zoology, University of Hawaii, Hawaii 47. Nielsen R, Matz M (2006) Statistical approaches for DNA barcoding. Syst Biol 55:162–169 48. Weigt LA, Crawford AJ, Rand AS, Ryan MJ (2005) Biogeography of the túngara frog, Physalaemus pustulosus: a molecular perspective. Mol Ecol 14:3857–3876 49. Crawford AJ, Bermingham E, Polanía SC (2007) The role of tropical dry forest as a longterm barrier to dispersal: a comparative phylogeographical analysis of dry forest tolerant and intolerant frogs. Mol Ecol 16:4789–4807 50. Cannatella DC, Hillis DM, Chippindale PT et al (1998) Phylogeny of frogs of the Physalaemus pustulosus species group, with an examination of data incongruence. Syst Biol 47:311–335 51. Wang IJ, Shaffer HB (2008) Rapid color evolution in an aposematic species: a phylogenetic analysis of color variation in the strikingly polymorphic strawberry poison-dart frog. Evolution 62:2742–2759
106
M. Vences et al.
52. Ward RD, Zemlak TS, Innes BH et al (2005) DNA barcoding Australia’s fish species. Phil Trans R Soc Lond B 360:1847–1857 53. Du Preez LH, Kunene N, Hanner R et al (2009) Population-specific incidence of testicular ovarian follicles in Xenopus laevis from South Africa: a potential issue in endocrine testing. Aquat Toxicol 95:10–16 54. Ivanova NV, Zemlak TS, Hanner RH, Hebert PDN (2007) Universal primer cocktails for fish DNA barcoding. Mol Ecol Notes 7:544–548 55. Ivanova NV, deWaard JR, Hebert PDN (2006) An inexpensive automation-friendly protocol for recovering high-quality DNA. Mol Ecol Notes 6:998–1002 56. Hebert PDN, Penton EH, Burns JM et al (2004) Ten species in one: DNA barcoding reveals cryptic species in the Neotropical skipper butterfly Astraptes fulgerator. Proc Natl Acad Sci USA 101:14812–14817 57. Hebert PDN, Stoeckle MY, Zemlak TS, Francis CM (2004) Identification of birds through COI DNA barcodes. PLoS Biol 2:1–7 58. Beamer DA, Lamb T (2008) Dusky salamanders (Desmognathus, Plethodontidae) from the Coastal Plain: multiple independent lineages and their bearing on the molecular phylogeny of the genus. Mol Phylogenet Evol 47:143–153 59. Schneider CJ, Cunningham M, Moritz C (1998) Comparative phylogeography and the history of endemic vertebrates in the Wet Tropics rainforests of Australia. Mol Ecol 7:487–498 60. James CH, Moritz C (2000) Intraspecific phylogeography in the sedge frog Litoria fallax (Hylidae) indicates pre-Pleistocene vicariance of an open forest species from eastern Australia. Mol Ecol 9:349–358 61. Hoskin CJ, Higgie MA, McDonald KR, Moritz C (2005) Reinforcement drives rapid allopatric speciation. Nature 437:1353–1356 62. McGuigan K, McDonald K, Parris K, Moritz C (1998) Mitochondrial DNA diversity and historical biogeography of a wet forest restricted frog (Litoria pearsoniana) from mid-east Australia. Mol Ecol 7:175–186 63. Hawkins MA, Sites JW Jr, Noonan BP (2007) Dendropsophus minutus (Anura: Hylidae) of the Guiana Shield using DNA barcodes to assess identity and diversity. Zootaxa 1540:61–67 64. Feldman CR, Parham JF (2004) Molecular systematics of Old World stripe-necked turtles (Testudines: Mauremys). As Herp Res 1:28–37 65. Kasapidis P, Magoulas A, Mylonas M, Zouros E (2005) The phylogeography of the gecko Cyrtopodion kotschyi (Reptilia: Gekkonidae) in the Aegean archipelago. Mol Phylogenet Evol 35:612–623
66. Kyriazi P, Poulakakis N, Parmakelis A et al (2008) Mitochondrial DNA reveals the genealogical history of the snake-eyed lizards (Ophisops elegans and O. occidentalis) (Sauria: Lacertidae). Mol Phylogenet Evol 49:795–805 67. Simon C, Frati F, Beckenbach A et al (1994) Evolution, weighting and phylogenetic utility of mitochondrial gene sequences and a compilation of polymerase chain reaction primers. Ann Entomol Soc Am 87:651–701 68. Frost DR, Crafts HM, Fitzgerald LA, Titus TA (1998) Geographic variation, species recognition, and molecular evolution of cytochrome oxidase I in the Tropidurus spinulosus complex (Iguania: Tropiduridae). Copeia 1998:839–851 69. Georges A, Birrell J, Saint KM et al (1998) A phylogeny for side-necked turtles (Pleurodira) based on mitochondrial gene sequence variation. Biol J Linn Soc 67:213–246 70. Daniels SR, Heideman NJL, Hendricks MGJ, Crandall KA (2006) Taxonomic subdivisions within the fossorial skink subfamily Acontinae (Squamata: Scincidae) reconsidered: a multilocus perspective. Zool Scripta 35:353–362 71. Daniels SR, Hofmeyr MD, Henen BT, Crandall KA (2007) Living with the genetic signature of Miocene induced change: evidence from the phylogeographic structure of the endemic angulate tortoise Chersina angulata. Mol Phylogenet Evol 45:915–926 72. Daniels SR, Heideman NJL, Hendricks MGJ (2009) Examination of evolutionary relationships in the Cape fossorial skink species complex (Acontinae: Acontias meleagris meleagris) reveals the presence of five cryptic lineages. Zool Scripta 38:449–463 73. Venegas-Anaya M, Crawford AJ, Escobedo Galván AH et al (2008) Mitochondrial DNA phylogeography of Caiman crocodilus in Mesoamerica and South America. J Exp Zool 309A:614–627 74. Stenson AG, Thorpe RS, Malhotra A (2004) Evolutionary differentiation of bimaculatus group anoles based on analyses of mtDNA and microsatellite data. Mol Phylogenet Evol 32:1–10 75. Makowsky R, Marshall JC Jr, McVay J et al (2010) Phylogeographic analysis and environmental niche modeling of the plain-bellied watersnake (Nerodia erythrogaster) reveals low levels of genetic and ecological differentiation. Mol Phylogenet Evol 55:985–995 76. Austin CC, Spataro M, Peterson S et al (2010) Conservation genetics of Boelen’s python (Morelia boeleni) from New Guinea: reduced genetic diversity and divergence of captive and wild animals. Cons Genet 11:889–896 77. Nagy ZT, Sonet G, Glaw F, Vences M (2012) First large-scale DNA barcoding assessment of
5 reptiles in the biodiversity hotspot of Madagascar, based on newly designed COI primers. PLoS ONE 7:e34506 78. Parham JF, Stuart BL, Bour R, Fritz U (2004) Evolutionary distinctiveness of the extinct Yunnan box turtle (Cuora yunnanensis) revealed by DNA from an old museum specimen. Proc R Soc Lond B 271:S391–S394 79. Stuart BL, Parham JF (2004) Molecular phylogeny of the critically endangered Indochinese box turtle (Cuora galbinifrons). Mol Phylogenet Evol 31:164–177 80. Passoni JC, Benozzati ML, Rodrigues MT (2008) Phylogeny, species limits, and biogeography of the Brazilian lizards of the genus Eurolophosaurus (Squamata: Tropiduridae) as inferred from mitochondrial DNA sequences. Mol Phylogenet Evol 46:403–414
DNA Barcoding Amphibians and Reptiles
107
81. Zhou K, Wang Q (2008) New species of Gekko (Squamata: Sauria: Gekkonidae) from China: morphological and molecular evidence. Zootaxa 1778:59–68 82. Schätti B, Utiger U (2001) Hemerophis, a new genus for Zamenis socotrae Günther, and a contribution to the phylogeny of Old World racers, whip snakes and related genera (Reptilia: Squamata: Colubrinae). Rev Suisse Zool 108:919–948 83. Utiger U, Helfenberger N, Schätti B et al (2002) Molecular systematics and phylogeny of Old and New World ratsnakes, Elaphe auct., and related genera (Reptilia, Squamata, Colubridae). Russ J Herpetol 9:105–124 84. Che J, Chen HM, Yang JX et al (2012) Universal COI primers for DNA barcoding amphibians. Mol Ecol Resour 12:247–258
Chapter 6 DNA Barcoding Fishes Lee A. Weigt, Amy C. Driskell, Carole C. Baldwin, and Andrea Ormos Abstract This chapter is an overview of the techniques for DNA barcoding of fishes from field collection to DNA sequence analysis. Recommendations for modifications of field protocols and best tissue sampling practices are made. A variety of DNA extraction protocols is provided, including high-throughput robot-assisted methods. A pair of well-tested forward and reverse primers for PCR amplification and sequencing are presented. These primers have been successfully used for DNA barcode on a wide array of marine fish taxa and also work well in most freshwater and cartilaginous fishes. Recipes and cycling protocols for both PCR amplification and sequencing and cleanup methods for the reaction products are provided. A method for the consistent production of high-quality DNA barcodes from DNA sequence data is given and stringent guidelines for judging the quality of raw sequence data are laid out. Key words: DNA barcoding, Fish, PCR, DNA extraction
1. Introduction Fishes are the largest and most diverse class of vertebrates and fortunately among the easiest groups for which to generate DNA barcode data. Estimates of species numbers generally exceed 30,000 (1), with about 300 new species described each year. Commercial fisheries value estimates exceed US$200 billion, and efforts in our lab have contributed to standardized protocols for fish barcoding (2, 3), other standardized field surveys and bioassessments (4–6), and testing standardized storage methods and ethanol-recycling instrumentation for contaminant carryover (7, 8). Eggs, larvae, and juvenile fish can be difficult to identify to species using morphology alone, and we have promoted DNA barcoding as a tool to assist all these efforts (9–11). We find that the correct taxonomy can be illuminated in complex and morphologically challenging species groups by combining comparative investigation of living color patterns, examination of traditional
W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_6, © Springer Science+Business Media, LLC 2012
109
110
L.A. Weigt et al.
morphological characters in preserved specimens, and DNA barcodes (12, 13). Efforts in our lab have focused on bony marine fish, but we have used these methods on both freshwater and cartilaginous fish, though there are other larger barcoding campaigns for both groups (14). We have focused on full-length barcode sequences, but, based on the success of others (15), will be starting “mini-barcode” work shortly on major collections of scientific importance collected 50+ years ago. We have found high-resolution digital images of freshly captured specimens to be extremely useful in elucidating species in taxonomically challenging species groups, and each of our specimens is photographed as soon as possible after collection and before preservation. Though it is possible to work with many types of fish tissue including scales, fin clips, blood, buccal swabs, bones, and others (16, 17), our preferred starting material is a small muscle biopsy from a fresh specimen. Since we photograph the fish (and subsequently examine much of the morphology) from the left side (fish “looking” to the left, in lateral view), we remove the biopsy from the right side and try to minimize damage to any important morphological characters. DNA extraction protocols vary by lab, but with fresh tissue from fish, almost all extraction protocols will yield amplifiable DNA. Significant value can be added to a specimen by performing archival quality DNA extractions, though these are more expensive than some alternative extraction methods (e.g., Chelex) that do not produce extracts viable for a great length of time. Some newer extraction protocols have emerged from the Guelph Barcoding lab (18), but as they are newer, the extracts have not been tested for longevity in archival biobanks. The “gold standard” for DNA extractions from animals is the phenol:chloroform method (19), but if performed manually, it has some critical drawbacks, including handling and disposing of hazardous chemicals. We present here our primary method—an automated version of the phenol–chloroform protocol that reduces the problematic factors. However, as not everyone will be able to afford the instrument on which this protocol is performed, we also present a manual method and other alternatives. These include a smaller instrument which utilizes a magnetic bead-based approach and a common filter membrane-based kit. Amplification of fish DNA via PCR is rarely problematic, and follows standard protocols. The primers are very robust, amplifying almost all taxa tested to date. The same is true for DNA sequencing. Finally, as much of fish biodiversity is known, we have been able to generate a reference sequence. This reference (with degenerate bases to represent variation among fish taxa) eases the alignment and analysis of fish data. We list specific brands used in our lab, but acceptable equivalents usually exist, for both consumables and many instruments.
6
DNA Barcoding Fishes
111
2. Materials Materials common to all laboratory steps include latex/nitrile gloves, as well as pipettes with disposable tips, both filtered and nonfiltered. In addition, use of a centrifuge with a rotor that can accommodate a microtiter plate and is capable of speeds greater than 1,000 rcf, and a thermal cycler, is required for many steps. 2.1. Sample Collection
1. Photo documentation: Digital camera, scale bar, color scale. 2. Tissue sampling: Scalpels, tweezers, tubes (Matrix-brand 2D labeled or other Matrix tubes or 2.0-ml cryovials), handheld barcode scanner, data-recording materials (computer with spreadsheet when possible), bleach or Decon ELIMINase, alcohol burner.
2.2. Tissue Storage
1. Tissue preservation buffer (21): 0.25 M EDTA, 25% DMSO, saturated with NaCl—500 ml DMSO, 1 L 0.5 M EDTA pH 8.0, 500 ml water, >200 g NaCl. Stir solution while adding salt; continue adding salt until no more goes into solution and it begins to collect on the bottom of the mixing vessel. 2. 95% Ethanol (see Note 1).
2.3. DNA Extraction: Automated and Manual Extractions
1. Autogen Prep 965 DNA extraction: Autogen 965 robot, and kit buffers including M1, M2, R3, R4, R5, R6, R7, R8, R9, and proteinase-K for use with animal extractions; 96-well deep well plates (Costar #3960). 2. Automated extractions using Qiagen BioSprint96: Biosprint robot, and BioSprint 96 DNA Blood Kit (940057), Buffer ATL (Qiagen 19076), and proteinase-K. 3. For both automated extraction methods: AxyMat silicone lids (Axygen) for 96-well digestion blocks, plexiglass (or other firm solid material) rectangles cut to fit the tops of the 96-well blocks, and 0.2% Tween® 20: 200 ml Tween® 20 in 100 ml H2O. 4. Manual extraction lysis buffer: 100 mM EDTA, 25 mM Tris pH 7.5, and 1% SDS. 5. 100 mg/ml proteinase-K dissolved in water. 6. Phenol, equilibrated to pH 7.5 with Tris–HCl pH 8.0. 7. Chloroform:isoamyl alcohol (24:1 ratio). 8. TE solution: 10 mM Tris, 1 mM EDTA pH 8.0; equilibrated to pH 7.6 with Tris–HCl pH 7.0. 9. Incubator or incubator shaker for tissue digestion, capable of maintaining a temperature of >50°C.
112
L.A. Weigt et al.
2.4. Polymerase Chain Reaction: Amplification and Purification
1. 10 mM deoxynucleotide (dNTP) mix. 2. 100 mM oligonucleotide Primers (IDT Technologies, USA). 3. Biolase Taq DNA Polymerase (BioLine). 4. 10× PCR Buffer for Bioline Taq. 5. 50 mM Magnesium chloride. 6. Liquidator 96-channel benchtop pipette (Rainin). 7. ExoSAP-IT (USB 78201) for purification. 8. 96-Well (0.2 ml volume) plastic PCR plates (Genemate T-3060-1). 9. Silicone plate mat (lid) for PCR plates (Genemate T-3161-1).
2.5. Polymerase Chain Reaction: Visualization
1. Agarose. 2. 1× TBE buffer: 0.9 M Tris base, 0.89 M boric acid, 0.02 M Na-EDTA; prepare by mixing 108 g Tris, 55 g boric acid, and 7.4 g Na-EDTA in a beaker together with 400 ml water, mix until dissolved, and add deionized water to 10 L. 3. Sample loading dye: 0.083% bromophenol blue; 0.083% xylene cyanol, and 10% glycerol. 4. DNA stain: Ethidium bromide (10 mg/ml) or SYBR SAFE (Invitrogen). 5. Optional: DNA size standard (“ladder”; Hi Lo DNA marker, Minnesota Molecular, Inc.). 6. Electrophoresis rig and power supply. 7. Gel imaging system/camera for use over UV light box.
2.6. Sanger Sequencing Components: BigDye Reactions
1. 5× Sequencing Buffer: 400 nm Tris–HCl pH 9.0, and 10 mM MgCl2. 2. Oligonucleotide Primers: Dissolved in water to 10 mM (Table 1 lists all primers used for fish). 3. BigDye® Terminator v3.1 Cycle Sequencing Kit (Applied Biosystems). 4. 96-Well (0.2 ml volume) plastic PCR plates (Genemate T-3060-1). 5. Silicone plate mat (lid) for PCR plates (Genemate T-3161-1).
2.7. Sephadex Purification of Cycle-Sequencing Products
1. Sephadex® G50 (Sigma). 2. Hi-Di™ formamide (Applied Biosystems). 3. Multiscreen® HTS filter plates (Millipore MSHVN4550). 4. Multiscreen column loader (Millipore MACL09645). 5. Liquidator 96-chanel manual pipette (Rainin). 6. 96-Well (0.2 ml volume) semi-skirted plastic PCR plates (Genemate T-3085-1). 7. Septaseal rubber mats (ABI #4315933).
6
DNA Barcoding Fishes
113
Table 1 Primer table for fish PCR (and M13 sequencing primers) (from refs. 10, 22, 23) Barcode primer name
Barcode primer sequence 5¢ → 3¢
FISHCO1LBC
TCAACYAATCAYAAAGATATYGGCAC
FISHCO1HBC
ACTTCYGGGTGRCCRAARAATCA
FISHCO1LBCm13F
CACGACGTTGTAAAACGACTCAACYAATCAYAAAGATATYGGCAC
FISHCO1HBCm13R
GGATAACAATTTCACACAGGACTTCYGGGTGRCCRAARAATCA
16SAR
CGCCTGTTTATCAAAAACAT
16SBR
CCGGTCTGAACTCAGATCACGT
m13F
CACGACGTTGTAAAACGAC
m13R
GGATAACAATTTCACACAGG
2.8. Genetic Analyzer Components
1. ABI 3130XL genetic analyzer: Polymer POP-7; 36-cm capillary array run using the ABI Template Protocol “RapidSeq36_ POP7” with a run time of 2,280 s. 2. ABI 3730XL genetic analyzer: Polymer POP-7; 50-cm capillary array run using the ABI Template Protocol “LongSeq50_ POP7” with a run time of 4,000 s.
2.9. Data Processing and Quality Control
1. Sequencher vers. 4.10.1 (Gene Codes). 2. Geneious (BioMatters)—use of the Geneious program and the BioCode plugin is discussed elsewhere in this volume.
3. Methods 3.1. Tissue Sampling
1. Photography processing—fish orientation—left side, fish’s head on left; see Note 2. 2. Tissues to sample (in order of decreasing desirability)—muscle biopsy from right side, right eye, portion of right pectoral fin, other fin clip, gill tissue, swabs, and scales. 3. Muscle biopsy—from right side, caudal region, dorsal to lateral line; avoid heavily parasitized areas (e.g., gills and guts) and areas of important morphological characters (e.g., fins and lateral line area); from larvae and small specimens, it may be necessary to destructively sample a portion of the specimen, and consultation with taxonomists is advised so as to avoid critical morphological regions (e.g., the suction disk on clingfish). 4. Clean all tools prior to touching specimen using bleach solution or flame sterilization, etc. Scrape off scales from the area to be sampled and carefully dissect out a small portion of muscle—the amount of tissue to sample is dependent on the
114
L.A. Weigt et al.
size of the specimen and storage vessel (do not exceed a tissue:buffer ratio of 1:4 if possible) (see Note 3). 5. From EtOH-preserved and -stored specimens: DNA leached from the specimen can be extracted from the alcohol in the storage container (8). (After distillation, the used ethanol can be recycled without risk of contamination (7).) However, increased yields will be obtained via more substantial yet destructive tissue biopsy (as above in Subheading 3.1, step 2). 3.2. Tissue Storage
1. BioBanking: One of the significant contributions of the DNA barcoding enterprise is a repository of genetic materials. These are tied to voucher specimens in public collections and the identity and integrity of the specimens have been validated genetically. These materials can then serve as a starting point for subsequent molecular investigations. Therefore, it is important to maximize the utility of all collected materials. 2. Frozen storage: Freezing tissues (−20°C or lower) is the recommended method of preservation to maximize potential future uses of the material. Vapor-phase liquid nitrogen is ideal. Frequently this is not feasible, particularly in the field, so alternatives are presented. 3. Salt/DMSO buffer storage: Transportation of ethanol and other flammables has become an issue, and salt/DMSO buffer is an option in those cases. Place small tissue chunks in the buffer, taking care not to overwhelm the buffer with too much tissue—a good ratio of tissue:buffer is 1:4. 4. Ethanol (95%) storage: 70% ethanol should be avoided (see Note 1).
3.3. DNA Extraction: Autogen Prep 965
1. Prepare fresh lysis solution for every run by dissolving appropriate aliquots of proteinase-K provided in kit with each aliquot of Reagent M1. Standard concentration of proteinase-K in M1 lysis buffer for overnight digestion of animal tissue is 0.4 mg/ml. 2. For tissue lysis, place tissue into the appropriate well of a 96 deep-well plate (Costar #3960), and add 150 ml of Reagent M2 and 150 ml Reagent M1 containing the predissolved proteinase-K at the concentration of 0.4–1.0 mg/ml. Cover the plate with a silicone mat (Axygen) and one or more plexiglass plates cut to fit the block to minimize evaporation of buffer and prevent contamination between wells. The silicone mat and plexiglass plates are taped firmly to the block. 3. Incubate the samples overnight at 56°C with shaking. 4. Spin the plates briefly to remove condensed droplets from the lid. Load lysis plates on the AutoGenprep 965, with an equal number of output plates for DNA and tips following manufacturer’s instructions. A maximum of four 96-well plates can be run simultaneously on the machine (see Note 4).
6
DNA Barcoding Fishes
115
5. Load Reagents R3, R4, R5/R6/R7, R8, and R9 into the appropriate reservoirs following manufacturer’s instructions. 6. The standard resuspension volume is 0.05 ml of buffer R9. If a large quantity of DNA is expected, such as when extracting vertebrate tissues or large amounts of other tissue, we change this volume to 0.1 ml. 7. Run the protocol on the instrument. 8. Upon completion, using a 96-well pipettor (if available), portion the DNA extracts into the desired amounts for the working and archival stocks for BioBanking. 3.4. DNA Extraction: Qiagen Biosprint Magnetic Bead Protocol (96-Well Plate Protocol)
1. We follow the Qiagen protocol for Biosprint extractions. Following are our deviations from the published protocol and our observations on particular steps. 2. Before beginning, check buffer ATL for white precipitate and take steps to resuspend it (see Note 6). 3. The MagAttract particles settle out of solution very quickly. Before adding this mix to the master mix, vortex at high speed for 3 min. Use immediately. Vortex again if much time has elapsed (>2–3 min). 4. Prepare Master mix of AL Buffer = 100 ml; isopropanol = 100 ml; MagAttract Suspension G = 15 ml. Prepare master mix 10% greater than that required for the total number of sample purifications to be performed. 5. Cut 5–25 mg of each tissue into small pieces and place in a 96-well S-Block. Add buffer ATL and proteinase-K. 6. Seal the plate following the same method as the Autogen lysis above (Subheading 3.3, step 2). 7. Place sealed plate in an incubator/shaker and digest overnight at 56°C (see Note 7). 8. Following lysis with ATL, briefly centrifuge the S-Block containing the samples to remove drops from underneath the lid. 9. Vortex the master mix containing Buffer AL, isopropanol, and MagAttract Suspension G (see Note 6) for at least 1 min. Add 215 ml of this master mix to each sample in the S-Block. 10. Place blocks on instrument and start and run protocol. 11. Upon completion, using a 96-well pipettor (if available), portion the DNA extracts into the desired amounts for the working and archival stocks for genetic repository (see Note 8).
3.5. Manual Extraction: Phenol:Chloroform Protocol, Following Ref. 20
1. It is typically easiest to carry out the extraction out in 1.7–2-ml centrifuge tubes. 2. For lysis, prepare fresh stock of lysis buffer (from Subheading 2.3, item 5) and add proteinase-K to 1 mg/ml. 3. Combine 1 ml lysis buffer with ~1 cm2 of tissue.
116
L.A. Weigt et al.
4. Incubate with shaking overnight at 56°C. 5. Add no more than 700 ml of the lysed sample to the extraction tube. If a large amount of tissue is being extracted, it may be best to dilute the extraction with more extraction buffer, divide the sample into more than one tube, and extract each separately (see Note 5). 6. Phenol extraction: Add an equal volume of phenol to the lysed sample, and vortex vigorously to mix the phases. Spin in a microcentrifuge at top speed for 1–2 min to separate the phases. Remove aqueous phase (top layer) to new tube, being careful to avoid the phase interface. 7. Repeat the phenol extraction two more times. 8. Chloroform:isoamyl extraction: As in Subheading 3.5, step 6, use an equal volume of chloroform:isoamyl alcohol (instead of phenol) to remove any trace phenol. Repeat once more. 9. Precipitate the DNA with equal volume of isopropanol, and incubate at −20°C for 1 h or longer. 10. Spin sample with alcohol in microcentrifuge for 10 min at maximum speed to pellet DNA. 11. Before resuspension, set tube on counter at room temperature (RT), covered with a tissue, for 10 min or until all residual ethanol has evaporated. 12. Resuspend DNA pellet in a volume (usually, 50–200 ml) of TE (or a 1/10 dilution of TE) to achieve desired concentration. Vortex to mix. 3.6. PCR Methods: Amplification
1. Thaw and prepare reagents in proper concentration for the PCR reaction. Wait for each reagent to thaw completely and then mix thoroughly. Dilute primers to a 10 mM working stock for the PCR reaction. If starting with lyophilized primers, spin down before opening the tube and resuspend to 100 mM in molecular-grade water to form the stock solution. Dilute this stock 1:10 to make working stock. 2. Mix all reagents in volumes listed in the PCR recipe (Table 2) to form the master mix. Keep your reaction plate (or tubes) and master mix on ice. Vortex the master mix vigorously or pipette up and down to mix well (vortexing will cause liquid to be trapped on the cap of the tube, so follow with 15-s spin in a mini-centrifuge). 3. Aliquot 9 ml of master mix into each well of the 96-well plate (Genemate). 4. Aliquot 1 ml of each DNA template (undiluted) to each well. Change tips between samples.
6
DNA Barcoding Fishes
117
Table 2 PCR reaction cocktail PCR reagents
Each well (ml)
96-Well plate (ml)
ddH2O
6.4
640
10 mM dNTPs
0.5
50
10× buffer
1
50 mM MgCl2
0.4
40
10 mM primer F
0.3
30
10 mM primer R
0.3
30
Bioline Taq (5 U/ml)
0.1
10
Total
9
100
900
5. Add 1 ml nuclease-free water to well H12 to function as negative PCR control. 6. Place silicone plate mat over the top of the 96-well plate and secure it with a roller. Centrifuge the plate in a plate centrifuge or plate spinner for 10–15 s at approximately 3,950 rcf (= “centrifuge briefly”). 7. Place the plate in a thermal cycler block and run PCR with the following cycling parameters: 95°C for 5 min, 35 cycles of 95°C for 30 s, 52°C for 30 s, and 72°C for 45 s, with a final extension at 72°C for 5 min and hold indefinitely at 10°C (see Notes 9–11). 3.7. PCR Methods: Visualization via Agarose Gel Electrophoresis
1. Cast a 1.5% agarose gel for each PCR reaction plate (e.g., add 0.75 g agarose to 50 ml 1× TBE buffer and boil in the microwave until the agarose is dissolved) (see Note 12). 2. Cool the solution, then add 1 ml ethidium bromide (10 mg/ml) per 50 ml of agarose solution, mix well, and pour immediately into the casting tray. 3. Let gel set for approximately 30 min or until firm. Remove combs from the gel and place it into an electrophoresis rig filled with 1× TBE buffer. 4. Add 2 ml 2× loading dye to each well of an empty 96-well plate. 5. Add 2 ml of each PCR product to the loading dye plate. Use new tips for each transfer. 6. Mix PCR product and dye by pipetting up and down, and then load 4 ml of the mixture to each well of the gel (see Note 12).
118
L.A. Weigt et al.
Table 3 Exosap purification of PCR product Reagents
Each well (ml)
96-Well plate (ml)
ddH2O
1.5
150
ExoSAP-IT
0.5
50
Total
2
200
7. Run gel at 100 V for approximately 12 min or until the bromophenol blue and xylene cyanol dyes in the loading dye are clearly separated. 8. At the end of the run, remove the gel from the rig and place on a UV transilluminator. Use a gel-imaging system to capture a digital image of the gel. 3.8. PCR Purifications: EXOSAP-IT
1. We use a fourfold dilution of the ExoSAP-IT mix. In a 1.7-ml microcentrifuge tube, mix nuclease-free water and ExoSAP-IT in the volumes listed in the Table 3. Keep the enzyme mix on ice or cold block at all times (see Note 13). 2. Vortex the diluted mix vigorously or pipette up and down to mix well. 3. Centrifuge the plate briefly to bring down all condensation from the sides of the wells and lid to the bottom. 4. Aliquot 2 ml of ExoSAP-IT mix to each well of the 96-well plate. 5. Place the silicone plate mat back on the top of the 96-well plate, press it down with a roller, and centrifuge briefly. 6. Place the plate in a thermal cycler block and run with the following parameters: 37°C for 30 min and 80°C for 20 min, and hold on 10°C.
3.9. Sanger Cycle Sequencing Protocol
1. Thaw and prepare reagents in proper concentration for the cycle sequencing reaction. Wait for each reagent to thaw completely and then mix them thoroughly. Keep the BigDye on ice and in the dark since the BigDye is both light and temperature sensitive. 2. Mix all four reagents in the volumes as listed in Table 4. Create two master mixes, one containing the forward primer and one containing the reverse (see Note 14). 3. Vortex the mixes vigorously or pipette up and down to mix. Centrifuge briefly. 4. Aliquot 9 ml of master mix into each well of the 96-well plate, keeping both plate and master mix on ice.
6
DNA Barcoding Fishes
119
Table 4 Cycle sequencing reaction recipe Reagents
Each well (ml)
96-Well plate (ml)
ddH2O
25
625
5× SEQ buffer
1.75
175
BigDye
0.5
50
10 mM primer F or R
0.5
50
Total
9
900
5. Aliquot 1 ml of purified PCR product into each well of the 96-well plate. Change tips after each sample. 6. Place a silicone plate mat on the 96-well plate, press it down with a roller, and centrifuge briefly. 7. Place the plates in a thermal cycler and run the cycle sequencing program with the following parameters: 30 cycles of 95°C for 30 s, 50°C for 30 s, and 60°C for 4 min and hold at 10°C. 8. After the program has finished, store the plates at 4°C in a dark refrigerator until purification (see Note 14). 3.10. Sephadex Purification of Sanger Sequence Reactions
1. Measure dry Sephadex G50 using the multiscreen black column loader (predrilled uniform holes which measure and deliver the correct amount of sephadex) into a Multiscreen® HTS filter plate for each 96-well cycle sequencing reaction plate to be cleaned. 2. Add 300 ml molecular-grade water to the wells and allow to sit at room temperature for at least 2 h in order to completely hydrate the sephadex matrix. 3. Place the filter plate on top of a 96-well PCR plate (the “catch” plate) and tape together with laboratory tape. 4. Centrifuge at 750 × g force for 5 min to drain the excess water from the wells. Discard the water. The catch plate can be used again, but ONLY for this purpose, not PCR. 5. Add the entire volume of the sequencing reaction to the center of the Sephadex columns (not along the side walls) taking care not to touch the column surface or destroy the integrity of the column. 6. Attach a new 96-well PCR plate to the bottom of each Sephadex plate and secure with lab tape. Make sure that the orientation of the plates is the same: the A1 well of the Sephadex plate is over the A1 well of the catch plate.
120
L.A. Weigt et al.
7. Centrifuge at 750 × g force for 5 min to elute the cleaned sequencing product into the catch plate. 8. Dry the cleaned sequencing products on a heat block at 90°C for 10–15 min or in a Sorvall Speedvac. Cover the plate with Septa Seal mat and store at −20°C (see Note 15). 9. To prep for running on the genetic analyzer, add 10 ml Hi-Di™ Formamide to each well (under a fume hood). 10. Denature the DNA by heating the plate at 97°C for 3 min. 11. Cool the plate at 4°C for 3 min. 12. Load the plates into the Genetic Analyzer. 3.11. Genetic Analyzer Methods
1. ABI 3130XL: Running a 36-cm capillary array run using the ABI Template Protocol “RapidSeq36_POP7” with a run time of 2,280 s. 2. ABI 3730XL: Running a 50-cm capillary array run using the ABI Template Protocol “LongSeq50_POP7” with a run time of 4,000 s (see Note 16).
3.12. Data Processing and Quality Control Methods
1. Production of the final DNA barcode sequence from the raw sequencer output (the “traces”) involves several steps (forward and reverse traces for one set of 96 specimens are processed together). 2. The method we outline here uses Sequencher vers. 4.10.1 (Gene Codes, Corp). Alternatively, use of the Geneious program (BioMatters) and the BioCode plugin is discussed elsewhere in this volume. 3. Trace trimming—trimming is based on the phred quality scores of each base call (see Note 17). Trimming criteria, as implemented in Sequencher, are as follows: trim from the 5¢ and 3¢ ends until the first (or last) 20 bases contain fewer than 3 bases with a phred score <20, and from both ends until the first (or last) 10 bases contain <3 ambiguous bases. 4. Filtering traces—after trimming, all traces <450 bp in length are discarded, as are those where <90% of the bases have an average phred score of 20 or higher (see Note 18). 5. Contig building—using the “Assemble by Name” option in Sequencher (if reference sequence is used, then “Assemble by Name to Reference”; see Note 19 for our degenerate reference sequence), forward and reverse trimmed traces are assembled into contigs. 6. If the two reads are less than 97% identical, the sequences are set aside for manual interpretation of cause (see Note 20). Such dissimilarity may be due to low-quality traces (if both reads are on the lower end of our quality spectrum, a good contig may not be possible), laboratory error, sequencer error or contamination.
6
DNA Barcoding Fishes
121
Manual base calls in the consensus sequence resulting from these contig assemblies are based on “confidence” (phred scores). 7. If there is a discrepancy in a base call between the forward and reverse reads, the base call in the consensus sequence will reflect the base with the highest confidence of the two (under the CONTIG menu, choose “Consensus by Confidence) (see Note 21). 8. Inspection—contig assemblies are manually inspected if any ambiguities or gaps exist or if there are more than three disagreements between the two reads (this information is available using Sequencher’s “Get Info” option). Base calls are double checked by eye and left as ambiguities when neither base call has high confidence (see Note 22). 9. Finalizing the consensus sequence—all reads are assembled together with a reference sequence into one large assembly (usually using the lowest similarity requirement—60%). The reference sequence is used as a length gauge and primer sequences are trimmed from all forward and reverse reads at this point, if not done in prior step. 10. The assembly is examined for gaps, which at this point usually stem from a base call error (e.g., one base mistakenly interpreted by the software as two), and these mistakes are rectified. The large assembly is then “dissolved” and each specimen’s pair of traces reassembled as in step 3. The consensus sequence is then exported from each trace contig assembly as a concatenated fasta-formatted text file. 11. Contamination check—if, in the previous step, a read does not assemble, then it is compared to the NCBI nucleotide database using BLAST (see Note 23).
4. Notes 1. Denatured ethanol is not conducive to molecular work and should be avoided. 2. If “painting” fins with formalin to better photograph a specimen’s natural colors, the biopsy should be taken from right side first or from an area not exposed to any formalin, as this can hinder DNA extraction and/or amplification. 3. When sampling specimens in the field, cutting the larger tissue sample into smaller pieces suitable for DNA extraction saves time back in the lab. Upon returning, one then only needs to open the tube and pick out one or two small minced pieces to place into the tube/plate for cell lysis and DNA extraction. Not doing this means the larger (pencil eraser size) piece of
122
L.A. Weigt et al.
tissue must be removed from the tube and subsampled at a later time, requiring more tools, sterilization, and, most importantly, more time. Partially mincing the tissue also aids penetration of the stabilizing buffer/solution. 4. There is a minimum of 2 plates and 24 samples (12 samples of Row A in each plate) required to balance the built-in centrifuge of the Autogen 965. 5. It is difficult to extract volumes smaller than 100 ml. A sample can be concentrated by resuspending in a smaller volume after precipitation. 6. Check that Buffer ATL does not contain a white precipitate. If necessary, incubate for 30 min at 37°C with occasional shaking to dissolve precipitate. MagAttract magnetic particles copurify RNA and DNA if both are present in the sample. If RNA-free DNA is required, add RNase A to the sample before starting the procedure. The concentration of RNase should be 2 mg/ml (add 2 ml of 100 mg/ml RNase A solution to each 100 ml of sample). 7. Place a weight on top of the caps during incubation. Mix occasionally during incubation to disperse the sample or place on a rocking platform. Lysis time varies depending on the type, age, and amount of tissue being processed. Lysis is usually complete in 1–3 h, but optimal results will be achieved after overnight lysis. After incubation, the lysate may appear viscous, but should not be gelatinous as it may clog the DNeasy 96 membrane: dilution may be required. 8. Elution with volumes less than 200 ml increases the final DNA concentration but may reduce the overall DNA yield. For samples containing less than 1 mg DNA, elution in 50 ml Buffer AE is recommended. For maximum DNA yield, repeat step 16 with another 200 ml Buffer AE. A second elution with 200 ml Buffer AE will increase the total DNA yield by up to 25%. However, due to the increased volume, the DNA concentration is reduced. If a higher DNA concentration is desired, the second elution step can be performed using the 200 ml eluate from the first elution. This will increase the yield by up to 15%. 9. Tailed primers (e.g., FISHCO1LBCm13F and FISHCO1HBCm13R) can be used in the PCR reaction for easier downstream processing. In this case, the sequencing primers will be the m13F and m13R primers. 10. If the PCR amplification is not successful, we use the standard animal 16S primers (16Sar and 16Sbr) (21) to check the quality of the DNA. The PCR recipe and cycling parameters are the same as for CO1, but with an annealing of 48°C instead of 52°C. 11. Silicone plate mats can be cleaned by soaking for a minimum of 10 min in a 10% bleach solution followed by rinsing with
6
DNA Barcoding Fishes
123
distilled water. After drying, UV irradiation is recommended prior to reuse. 12. Agarose gels can be stored for 2–3 days prior to use. To store, wrap gels in plastic wrap and keep at 4°C. Gels can also be made up in large volumes and stored in aliquots of a volume sufficient for pouring one gel (in 50-ml Falcon tubes, which can be reused). At the time of use, the solid gel is put into a beaker and microwaved until liquid. 13. The original strength Exosap-IT can be diluted as much as tenfold and still be effective; this will cut down costs even further. Incubation time at 37°C must be increased to accommodate the lower quantity of enzyme. Diluted ExoSAP-IT mixes cannot be refrozen and has a short shelf life at 4°C. We discard any excess diluted ExoSAP-IT immediately. 14. Keep sequencing reactions in a dark place at all times to avoid degradation of the light-sensitive sequencing product. If tailed primers FISHCO1LBCm13F and FISHCO1HBCm13R were used in the PCR reaction, the sequencing primers can be the same as the amplification primers or, alternatively, the m13 sequencing primers m13F and m13R. 15. Multiscreen® HTS filter plates (as well as the plastic catch plates used for Sephadex) can be reused by filling the filter plate with 300 ml distilled water and spinning for 5 min at 700 × g force. Repeat this procedure once more and invert to dry. Dried cleaned sequencing reactions can be kept for months at −20°C or can be shipped. While other methods than Sephadex cleanup can be used and are sometimes less expensive (e.g., ethanol precipitations), improper execution by inexperienced users can lead to premature degradation of the capillary arrays on the genetic analyzer. In the hands of most users, the Sephadex method consistently produces high-quality cleaned sequencing products. 16. The newest polymer from Applied Biosystems, POP7, is used for all sequencing runs, and the running buffer is changed 3×/ week. The number of samples in the 3730XL queue can be increased by combining four sets of 96 samples into a 384-well plate. This can maximize the number of samples run over a weekend. Once run, the sequencing reactions are kept at 4°C for a week. They can be re-run on the sequencer with no significant loss of signal during this period. 17. Phred scores are essentially a measure of the accuracy of a base call made by the sequencing software. According to many sources, a phred score of 20 indicates a 99% probability of an accurate base call. We consider base calls with a phred score of <20 as “low” quality and “high”-quality calls have a phred score >40 (users with different parameter definitions can generate incongruent results).
124
L.A. Weigt et al.
18. Occasionally, sequences with an initial overall quality <80% (see Subheading 3.7, step 2) can be improved via visual inspection and manual trimming. We only do this when it is clear that the trimming parameters failed to remove additional poorquality bases at the end of the sequence, thus lowering the overall quality. It is sometimes possible to cut out the poorquality bases and raise the overall sequence quality while maintaining a length >450 bp. In Sequencher, candidates for this treatment may be recognized as post-trim sequences of adequate (or longer) length with 70–80% overall quality. 19. Our degenerate fish reference sequence is 5¢ → 3¢ NNTTTAT NTAGTATTTGGTGCCTGAGCCGGAATAGTAGGCACA GCCCTAAGCYTAYTAATTCGAGCTGAACTAAGCCAAC CTGGCGCCCTNNTNGGNGACGACCAAATTTATAATG TAATCGTAACTGCCCACGCCTTTGTAATAATTTTCTT TATAGTAATACCAATTATGATTGGAGGCTTTGGAAAC TGAYTAATCCCCCTAATGATTGGGGCCCCCGACATGG CCYTCCCYCGAATAAACAACATAAGCTTTTGNNTNNT NCCNCCNTCNNTCNTNNTNNTNNTNGCATCCTCTG GNNTNGAAGCCGGGGCCGGAACAGGATGAACAGTT TANCCNCCNNTAGCNGGAAACYTAGCCCACGCAGGA GCCTCTGTAGACCTAACAATTTTCTCCYTTCATCTAG CAGGAATNTCCTCAATNNTNGGNGCAATTAACTTTA TTACAACAATYYTNAANATGAAACCNCCNGCNATNTC NNNNTACCAAACACCCYTATTTGTTTGAGCNNNNYT AATTACAGCCGTNNTNNTNNTNNTNTNNYTCCNNG TCYTTGCTGCTGGCATTACAATGYTTYTCACAGACCG AAACYTAAACACAACCTTCTTTGACCCTGCAGGAGGA GGAGACCCCATTYTGTACCAACACYTAYTC. 20. If a contig has a few disagreements between the sequences but no ambiguities or gaps, each base in the sequence has a “solid” call based on relative confidence. Contigs with >3 disagreements and no ambiguities are visually inspected to ascertain the cause(s) of the disagreement. 21. To use the “Assemble by Name” option in Sequencher which is really the only way to create a large number of assemblies without a tedious amount of file renaming, it is important to plan ahead. Trace files need to come from the sequencer with names that can be readily combined; therefore, files from a run of 96 using multiple primers or plates need to be named in a similar fashion so that the entire batch can be treated at once. Standardization is the key. Our fish trace files are labeled fieldnumber_Genus_species_barcode_F (only part of the generic and specific names are used; e.g., BLZ8013_Scaru_ iseri_89893427_F, a forward trace file). Sequencher breaks up a name as directed—underscores are most common (the above
6
DNA Barcoding Fishes
125
example would break into five names). We often use regular expressions to define the parameters to be used for the splitting so that we can get the names we want on our final fasta files (e.g., (.*)_(.*) will take off only the F or R from the above example and the remainder will be the consensus sequence fasta file defline). 22. At the point of visual inspection, there are generally no changes to be made to the contig. All of the previous stringent filtering, trimming, etc. leave very few miscalls. The most common errors remaining are multiple calls—2 real As are called as 3, 3 real Gs are called as 2. Errors such as these can cause a gap to be inserted in the consensus sequence. Miscalls such as these can slip through all of our QC steps and are quite pernicious. Errors, where one extra base is called, can be caught by assembling all sequences in a project together with a reference sequence. But errors, where too few bases are called, are more vexing. There is no foolproof method for identifying them. When they occur very near the 3¢ end of a sequence, if not caught, they can lead to artificial increases in distances from other sequences or stop codons. 23. In general, sequences from almost all fish species will readily assemble to one another and if a sequence does not, then it is likely a contaminant. Contaminants in our fish sequences are generally bacterial or fungal in origin. BLASTing against GenBank is the best way to verify this, as these contaminating sequences are often not a match to any known COI sequence.
Acknowledgments Our Fish DNA Barcoding Team would like to thank the NMNH Fish scientists and taxonomists for taking the time to educate us on fish biology and biodiversity and make this work thoroughly enjoying. We also thank David Erickson for his tireless efforts to produce this important volume. References 1. Eschmeyer WN, Fricke R, Fong JD, Polack DA (2010) Marine fish diversity: history of knowledge and discovery (Pisces). Zootaxa 2525: 19–50 2. Handy SM, Deeds JR, Ivanova NV et al (2010) A single laboratory validated method for the generation of DNA barcodes for the identification of fish for regulatory compliance. J AOAC Int 94:1–10
3. Yancy HF et al (2008) A protocol for validation of DNA-barcoding for the species identification of fish for FDA regulatory compliance. FDA Lab Inf Bull LIB No 4420 4. Pilgrim EM, Jackson SM, Swenson S, Turcsanyi I, Friedman E, Weigt LA, Bagley MJ (2010) Incorporation of DNA barcoding into a largescale biomonitoring program: opportunities and pitfalls. J NABS 30:217–231
126
L.A. Weigt et al.
5. Gemeinholzer B, Rey I, Weising K, Grundmann M, Muellner AN et al (2010) Organizing specimen and tissue preservation in the field for subsequent molecular analyses, chap. 7. In: Eymann J, Degreef J, Hauser C, Monje JC, Samyn Y, Vanden Spiegel D (eds) Manual on field recording techniques and protocols for all taxa biodiversity inventories. ABCTaxa (Belgium) 8:653 6. Leponce M, Meyer C, Hauser CL, Bouchet P, Delabie J, Weigt L, Basset Y (2010) Challenges and solutions for planning and implementing large-scale biotic inventories, chap. 3. In: Eymann J, Degreef J, Hauser C, Monje JC, Samyn Y, VandenSpiegel D (eds) Manual on field recording techniques and protocols for all taxa biodiversity inventories. ABCTaxa (Belgium) 8:653 7. Keel WG, Moser W, Giaccai J, Ormos A, Tanner J, Weigt LA (2011) Alcohol recycling at the Smithsonian Institution, National Museum of Natural History (NMNH). Collect Forum 25(1):10–21 8. Shokralla S, Singer GAC, Hajibabaei M (2010) Direct PCR amplification and sequencing of specimens’ DNA from preservative ethanol. Biotechniques 48:305–306 9. Venegas RP, Hueter R, Gonzalez J, Tyminski J, Remolina JFG et al (2011) An unprecedented aggregation of whale sharks, Rhincodon typus, in Mexican coastal waters. PLoS One 6(4): e18994. 10. Baldwin CC, Mounts JH, Smith DG, Weigt LA (2009) Genetic identification and color descriptions of early life-history stages of Belizean Phaeoptyx and Astrapogon (Teleostei: Apogonidae) with comments on identification of adult Phaeoptyx. Zootaxa 2008:1–22 11. Baldwin CC, Weigt LA, Smith DG, Mounts JH (2009) Reconciling genetic lineages with species in Western Atlantic Coryphopterus (Teleostei: Gobiidae). Smithsonian contribution. Mar Sci 38:111–138 12. Baldwin CC, Castillo CI, Weigt LA, Victor BC (2011) Seven new species within western Atlantic Starksia atlantica, S. lepicoelia, and S. sluiteri (Teleostei: Labrisomidae), with comments on congruence of DNA barcodes and species. Zookeys 79:21–72
13. Tornabene L, Baldwin CC, Weigt LA, Pezold F (2010) Exploring the diversity of western Atlantic Bathygobius (Teleostei: Gobiidae) with cytochrome c oxidase-I, with descriptions of two new species. Aqua 16:141–170 14. Wong EH-K, Shivji MS, Hanner RH (2009) Identifying sharks with DNA barcodes: assessing the utility of a nucleotide diagnostic approach. Mol Ecol Res 9:243–256 15. Hajibabaei M, Smith MA, Janzen DH, Rodriguez JJ, Whitfield JB, Hebert PDN (2006) A minimalist barcode can identify a specimen whose DNA is degraded. Mol Ecol Notes 6:959–964 16. Kumar R, Singh PJ, Nagpure NS, Kushwaha B, Srivastava SK, Lakra WS (2007) A non-invasive technique for rapid extraction of DNA from fish scales. Ind J Exp Biol 45:992–997 17. Lucentini L, Caporali S, Palomba A, Lancioni H, Panara F (2006) A comparison of conservative DNA extraction methods from fins and scales of freshwater fish: a useful tool for conservation genetics. Cons Genet 7:1009–1012 18. Ivanova NV, Dewaard JD, Hebert PDN (2006) An inexpensive, automation-friendly protocol for recovering high-quality DNA. Mol Ecol Notes 6:998–1002 19. Sambrook J, Fritsch EF, Maniatis T (1989) Purification of nucleic acids. In: Molecular cloning: a laboratory manual. Cold Spring Harbor Laboratory Press, pE.3–4 20. Palumbi SR (1996) Nucleic acids II: the polymerase chain reaction. In: Hillis DM, Moritz C, Mable BK (eds) Molecular systematics. Sinauer, Sunderland, MA 21. Seutin G, White BN, Boag PT (1990) Preservation of avian blood and tissue samples for DNA analysis. Can J Zool 69:82–90 22. Ivanova NV, Zemlak TS, Hanner RH, Hebert PDN (2007) Universal primer cocktails for fish DNA barcoding. Mol Ecol Notes 7:544–548 23. Simon C, Frati F, Beckenbach A, Crespi B, Liu H, Flook P (1994) Evolution, weighting, and phylogenetic utility of mitochondrial gene sequences and a compilation of conserved polymerase chain reaction primers. Ann Entomol Soc Am 87:651–701
Chapter 7 DNA Barcoding Birds: From Field Collection to Data Analysis Darío A. Lijtmaer, Kevin C.R. Kerr, Mark Y. Stoeckle, and Pablo L. Tubaro Abstract As of February 2011, COI DNA barcode sequences (a 648-bp segment of the 5¢ end of the mitochondrial gene cytochrome c oxidase I, the standard DNA barcode for animals) have been collected from over 23,000 avian specimens representing 3,800 species, more than one-third of the world’s avifauna. Here, we detail the methodology for obtaining DNA barcodes from birds, covering the entire process from field collection to data analysis. We emphasize key aspects of the process and describe in more detail those that are particularly relevant in the case of birds. We provide elemental information about collection of specimens, detailed protocols for DNA extraction and PCR, and basic aspects of sequencing methodology. In particular, we highlight the primer pairs and thermal cycling profiles associated with successful amplification and sequencing from a broad range of avian species. Finally, we succinctly review the methodology for data analysis, including the detection of errors (such as contamination, misidentifications, or amplification of pseudogenes), assessment of species resolution, detection of divergent intraspecific lineages, and identification of unknown specimens. Key words: Birds, Cytochrome c oxidase I, DNA barcodes, Collection, DNA extraction, Neighbor joining, Polymerase chain reaction, Pectoral muscle, Sequencing, Toe pad
1. Introduction Taxonomy and phylogenetic affinities are better understood in birds than in any other large group of organisms. Additionally, they are probably the best represented group of vertebrates in frozen tissue collections, with more than 300,000 tissue samples covering nearly 75% of known bird species (1). These characteristics make birds an ideal group to analyze the effectiveness of a standardized genetic method for species identification—i.e., DNA barcoding. Consequently, they were the first taxonomic group for which a largescale barcoding study was performed (2) and were the focus of one
W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_7, © Springer Science+Business Media, LLC 2012
127
128
D.A. Lijtmaer et al.
Fig. 1. Localities of collection of bird tissue samples that have been DNA barcoded so far as of February 2011.
of the first global barcoding campaigns, the all birds barcoding initiative (ABBI), which was launched in September 2005 with the goal of obtaining barcodes for the ca. 10,000 extant bird species. The initial avian barcoding study (2), in which roughly 40% of the North American species were examined, showed that a 648-bp segment of the 5¢ end of the mitochondrial gene cytochrome c oxidase I (COI) was highly effective for species identification, presaging similar findings in diverse animal groups. Following this preliminary analysis, coverage of North American species expanded to near completion (3) and avian barcode surveys commenced in other regions, including the Neotropics (4–6), the Palearctic (7–9), the Indomalayan region (10, 11), and Australasia (12). As of February 2011, more than 23,000 avian barcode sequences from more than 3,800 species had been obtained, representing more than one-third of the world’s avifauna (Fig. 1). These studies demonstrated that a COI barcode effectively distinguishes among known species of birds (see also ref. 13) and additionally highlights species and species groups in which further analyses of taxonomic boundaries are necessary. Even in a wellstudied group such as birds, barcoding projects have revealed previously undetected lineages, many of which could represent new species (e.g., ref. 14). Increasingly comprehensive public libraries of bird barcodes also enable new lines of scientific inquiry and practical applications, including analyses of diversification patterns at continental scales (15), identification of species involved in birdstrikes (16–18), studies of avian reservoirs for human and animal diseases from blood meals of arthropod vectors (19), and identification of bird species occupying cavity nests (20).
7
DNA Barcoding Birds: From Field Collection to Data Analysis
129
Avian barcoding projects also present challenges. Approximately 25% of species are not represented in frozen tissue collections, and obtaining high-quality DNA from historical specimens, such as study skins or skeletons, is arduous and often unsuccessful. Collecting new specimens is relatively expensive and time consuming as compared to collecting other animal groups, such as insects. This is particularly challenging in the context of ABBI’s goal of obtaining barcodes from multiple individuals—ideally belonging to geographically distant populations—of all avian species. In addition, many of those species absent from tissue collections are rare or endangered, limiting the possibility of field collection (1). Blood is often collected from threatened species to avoid sacrificing individual birds, but this adds another challenge because avian red cells are nucleated and contain few mitochondria, making blood a relatively poor source of mitochondrial DNA. This results in a higher risk of amplifying nuclear-mitochondrial pseudogenes, or numts, instead of the desired COI mitochondrial copy (21). Finally, necessary permits for collecting specimens and transporting samples within and across national borders are often particularly complex for birds (see Note 1). In this chapter, we detail the methods for barcoding birds, covering the entire process from field collection to data analysis. We focus on the methods that have been most widely used, and include a brief description of other options where appropriate. Most of the methods that are used to barcode birds are also used for other animal organisms and in many other molecular studies. Therefore, although we outline all the information that a reader needs to barcode avian samples, we emphasize those aspects that are specific to avian barcoding, addressing the aforementioned challenges posed by birds.
2. Materials 2.1. Collecting, Documenting, and Storing Tissue Samples and Their Associated Vouchers
Materials needed for the first steps of the pipeline are not specific to barcoding and include general equipment for collecting specimens (see Note 2), dissecting tools for obtaining tissue samples, materials for storing tissue samples, taxidermy materials for preparing vouchers, and imaging equipment for documenting specimens. See refs. 22–28 for a general description of materials needed to collect, prepare and store avian tissue samples and their associated vouchers.
2.2. DNA Extraction
The following are the working solutions for the manual glass fiber (GF) protocol for DNA extraction using 96-well plates (29, 30) or individual tubes. The volumes described are those needed to extract ten 96-well plates or approximately 1,000 samples (see the protocol available from the Canadian Centre for DNA Barcoding (CCDB)
130
D.A. Lijtmaer et al.
website (www.dnabarcoding.ca) for recipes for preparing stock solutions and for descriptions and suppliers of reagents, disposables, and equipment 30). 1. Vertebrate lysis buffer (VLB): 0.5% SDS, 100 mM NaCl, 50 mM Tris–HCl pH 8.0, and 10 mM EDTA pH 8.0. To prepare 50 ml of VLB, mix 0.25 g of SDS, 5 ml of 1 M NaCl, 2.5 ml of 1 M Tris–HCl pH 8.0, and 1 ml of 0.5 M EDTA pH 8.0, and then add double-distilled water (ddH2O) to reach the final volume. 2. Binding buffer (BB): 6 M guanidine thiocyanate, 20 mM EDTA pH 8.0, 10 mM Tris–HCl pH 6.4, and 4% Triton X-100. To prepare 100 ml of BB, mix 70.9 g of guanidine thiocyanate, 4 ml of 0.5 M EDTA pH 8.0, 10 ml of 0.1 M Tris–HCl pH 6.4, and 4 ml of Triton X-100, and then add ddH2O to reach the final volume (see Note 3). 3. Wash buffer (WB): 60% ethanol, 50 mM NaCl, 10 mM Tris–HCl pH 7.4, and 0.5 mM EDTA pH 8.0. To prepare 750 ml of WB, mix 475 ml of 96% ethanol, 37.5 ml of 1 M NaCl, 7.5 ml of 1 M Tris–HCl pH 7.4, and 0.75 ml of 0.5 M EDTA pH 8.0, and then add ddH2O to reach the final volume. Mix well and store at −20°C. 4. Binding mix (BM): To prepare 100 ml of BM, mix 50 ml of BB and 50 ml of 96% ethanol. BM is stable for about 1 week at room temperature. 5. Protein wash buffer (PWB): To prepare 180 ml of PWB, mix 47 ml of BB and 126 ml of 96% ethanol, and then add ddH2O to reach the final volume. PWB is stable for about 1 week at room temperature and it should be discarded if any crystallization occurs. 2.3. PCR Amplification of Cytochrome C Oxidase I
The following are the reagents needed to amplify the COI barcode region via Polymerase Chain Reaction (PCR) according to the protocol generated at the CCDB (31). 1. Taq polymerase: We recommend Platinum Taq polymerase (Invitrogen), which is the one currently used at the CCDB (see Note 4). 2. 10× PCR buffer (for Platinum Taq). Store at −20°C. 3. 50 mM MgCl2. Store at −20°C. 4. 10 mM dNTP mix. Store at −20°C. 5. 10 μM primer solution (obtained by diluting ten times the 100 μM stock solution, which should be prepared from the desiccated primer by dissolving each nmol of the primer in 10 μl of ultrapure water). Store at −20°C. 6. 10% Trehalose (obtained by dissolving each gram of D-(+)trehalose dihydrate in 10 ml of ultrapure water). Approximately
7
DNA Barcoding Birds: From Field Collection to Data Analysis
131
6.25 ml of 10% trehalose are used for 1,000 PCRs. Store at −20°C (see Note 5). 7. Ultrapure water. 2.4. Sanger Sequencing
The following are the reagents needed to obtain the COI barcode sequence following the protocol developed at the CCDB (32). 1. BigDye Terminator v3.1 reaction mix (ABI). 2. 5× sequencing buffer (400 mM Tris-HCl, pH 9.0, 10 mM MgCl2). 3. 10% Trehalose (see above). 4. 10 μM primer solution (see above). 5. Ultrapure water. 6. Sephadex G-50 (Sigma-Aldrich) for purification of sequence products.
3. Methods 3.1. Collecting, Documenting, and Storing Tissue Samples and Their Associated Vouchers
3.1.1. Obtaining and Storing Tissue Samples
Avian barcoding projects often rely on tissue samples already deposited in museums (3, 7–9). However, current collections do not always provide adequate coverage of all bird species or regions. In these cases, barcoding projects are a catalyst for the growth of bird tissue collections (e.g., ref. 6). Collecting avian specimens, obtaining and storing tissue samples, and preparing vouchers are complex tasks. Here, we focus on the key points and emphasize those that are particularly relevant in the context of barcoding. Regardless of whether tissue samples are collected for the project or obtained from museums, it must be borne in mind that they should be sampled broadly across the geographic range of species so that intraspecific genetic variation is accurately represented. To achieve this objective, as a rule of thumb, it is recommended to analyze five to ten specimens per species selected from sites distributed throughout its range. However, this number varies depending on various factors, such as the complexity of the species population structure, availability of specimens, permits, and financial limitations (see Note 6). 1. Collection of specimens should follow standard procedures (e.g., ref. 26) in accordance with the collection permits obtained for the project (see Note 1). Ideally, tissue samples should be obtained immediately after collecting the specimen. If this is not possible, the intact specimen should be kept frozen until tissue sampling can be performed (see Note 7). The most widely used tissue source is pectoral muscle (which is large and easy to access), but other sources of muscle, such as the heart, are also commonly used. The liver has also been sampled
132
D.A. Lijtmaer et al.
traditionally, but, likely due to its high enzymatic activity, liver samples are not as good as muscle samples for amplifying mitochondrial DNA (A. Borisenko, personal communication). 2. For long-term preservation of tissue samples, immediate freezing is recommended. The use of nitrogen tanks is a popular method to achieve this while in the field. Once the sample is deposited in a permanent collection, it will likely be kept in either nitrogen or an ultracold freezer at −80°C (see Note 8). Regular microtubes can be used for storing the samples in ultracold freezers, but cryogenic tubes, which are thicker walled, are required if samples are stored in nitrogen, even if only for a few days. If samples cannot be frozen either in the field or permanently, then they should be fixed (see Note 9). The most common fixative is ethanol (96% or higher, see Note 10), but there are other options, such as DMSO buffer. In this case, regular microtubes can be used (see Note 11). 3. When only a blood sample is obtained (e.g., with rare or endangered species), it is also recommended to freeze the sample, although blood is usually immersed in ethanol or lysis buffer (see Note 12) regardless of the temperature of storage. 3.1.2. Preparing, Documenting, and Storing Vouchers
1. The presence of vouchers associated with tissue samples is critical when establishing a barcode library (see Notes 13–17) and their preparation and storage should follow standard procedures (22–28). 2. Documentation of vouchers is an important step in the barcode pipeline; photographs of specimens should be included with the information uploaded to the Barcode of Life Data Systems (BOLD; www.boldsystems.org; ref. 33). BOLD is an online repository of barcode records and a workbench for DNA barcoding projects. Photographs typically document prepared specimen skins (which should also feature a scale and the voucher number, Fig. 2) but alternatively could feature the living bird (see Note 18) or the specimen prior to preparation if only a skeleton will be prepared (both photographs of the nonprepared specimen and the skeleton can be uploaded). When a project uses samples already deposited in museum collections, photographs of vouchers should still be included as data to support the DNA barcode sequence.
3.1.3. Data Associated to the DNA Barcode Sequence
1. The collection information associated with a barcode record is vital for its use either for identification purposes, aiding species discovery, or any evolutionary or ecological study. Several information fields can be uploaded to BOLD, and increasing the amount of information enhances the value of the barcode record. The information about the data that should be included in each barcode record and the spreadsheet used to upload the data can be obtained from the BOLD website (see Note 19).
7
DNA Barcoding Birds: From Field Collection to Data Analysis
133
Fig. 2. Photographs of vouchers (particularly museum skins) add value to BOLD records. Picture taken by K. Kerr.
2. As previously mentioned, images of each specimen should also be uploaded to BOLD. The image submission protocol can also be obtained from the BOLD website. 3.2. DNA Extraction
3.2.1. 96-Well Plate Format
A homemade GF DNA extraction method has been developed by Ivanova et al. (29) with the objective of providing high-quality DNA extracts at low cost and thus increasing the efficiency of the barcoding process. This protocol can be applied to either vertebrates or invertebrates with only slight modifications, and has already been used on thousands of bird specimens (6, 8). Several different types of tissue samples can be used with this method, including muscle, blood, feathers, and toe pads (see Note 20). This method can also be adapted to various scales, from single reactions to 384-well plates. We describe below a version of the protocol for 96-well plates, which is a commonly used scale when developing large bird barcoding surveys, and a small-scale version for individual tubes. Both utilize the working solutions listed in Subheading 2.2. In high-throughput laboratories, an automated version of the protocol may be employed (this version is not described here; see ref. 29 for a detailed protocol). 1. For each plate, mix 5 ml of VLB and 0.5 ml of Proteinase K (20 mg/ml) and dispense 50 μl of this Lysis Mixture in each well.
134
D.A. Lijtmaer et al.
2. Add a small piece of tissue (approx. 1–2 mm3, see Note 21) to each well of the plate (see Notes 22–24). To avoid cross contamination, it is highly recommended to gently cover the plate with caps before transferring the tissue and only uncover the row that is being used (see Notes 25 and 26). After transferring all the samples into the plate, the caps need to be fully inserted to avoid evaporation during incubation. 3. To allow digestion, incubate at 56°C overnight (or for a minimum of 6 h, see Note 27). 4. Centrifuge the plate at 1,500 × g force for 15 s to remove any condensate from the caps. 5. Remove the caps and add 100 μl of BM to each sample using a multichannel pipette. Mix by pipetting. 6. Transfer the lysate (about 150 μl) from the wells of the microplate into the wells of a GF plate (e.g., AcroPrep 96 1 ml filter plate with 1.0 μm GF media) placed on top of a squarewell block (e.g., PP MASTERBLOCK, 96-well, 2 ml) to be used as a catch plate, using a multichannel pipette. Seal the plate with self-adhering cover (e.g., Axyseal sealing film). 7. Centrifuge the GF plate with the square-well block at 5,000 × g force for 5 min to bind DNA to the GF membrane. 8. Remove the cover and add 180 μl of PWB to each well of the GF plate. Seal the plate with a new cover and centrifuge at 5,000 × g force for 2 min. 9. Add 750 μl of WB to each well of the GF plate. Seal with a new cover and centrifuge at 5,000 × g force for 5 min. 10. Discard the square-well block and the flow through (see Note 28). Remove the cover film of the GF plate, place it on the lid of a tip box, and incubate at 56°C for 30 min to evaporate residual ethanol. 11. Place the GF plate on top of the microplate that will be used to collect the DNA. Dispense 30–60 μl of ddH2O (prewarmed to 56°C) directly onto the membrane in each well of the GF plate and incubate at room temperature for 1 min before sealing the plate. 12. Place the assembled plates on a clean square-well block (to prevent cracking of the collection plate) and centrifuge at 5,000 × g force for 5 min to elute the DNA into the microplate (see Note 28). Remove the GF plate and discard it. 13. Cover the microplate containing the DNA extracts with caps or aluminum PCR foil. Extracts can be temporarily stored in a refrigerator (4°C), but a freezer (−20°C) is recommended for long-term storage. Between 1 and 5 μl of the DNA extract should be used for PCR depending mainly on the quality of the DNA source (e.g., fresh tissue sample vs. toe pad sample).
7 3.2.2. Individual Tubes Format
DNA Barcoding Birds: From Field Collection to Data Analysis
135
1. Mix 50 μl of VLB and 5 μl of Proteinase K (20 mg/ml) multiplied by the number of samples to process. Put 50 μl of this Lysis Mixture in each tube. 2. Add a small piece of tissue (approx. 1–2 mm3, see Note 21) to each tube (see Notes 22–24 and 26). 3. To allow digestion, incubate the tubes at 56°C overnight (or for a minimum of 6 h) (see Note 27). 4. Centrifuge the tubes at 5,000–8,000 × g force for 15 s to remove any condensate from the walls and lids. 5. Add 100 μl of BM to each tube. 6. Mix the tubes by pipetting and transfer the lysate into spin columns (e.g., Epoch Biolabs spin columns with attached Lid) placed on top of collection tubes. 7. Centrifuge the columns and tubes at 5,000–6,000 × g force for 2 min to bind DNA to the GF membrane. 8. Add 180 μl of PWB to each column and centrifuge the columns and tubes at 5,000–6,000 × g force for 2 min. Pour out the contents of each collection tube or replace it with a new tube. 9. Add 700 μl of WB to each column and centrifuge the columns and tubes at 5,000–6,000 × g force for 4 min. Pour out the flow through from each collection tube or replace it with a clean one and centrifuge the columns and tubes at 10,000 × g force for an extra 4 min. 10. Replace the collection tubes with 1.5 ml tubes with removed lids and incubate the columns (with the lids opened) and tubes at 56°C for 15–30 min (incubation can alternatively be done at room temperature). 11. Add 50–80 μl of ddH2O (prewarmed to 56°C) directly onto the membrane of each column and incubate the columns and tubes at room temperature for 1 min before closing the lids of the columns. 12. Centrifuge the columns and tubes at 10,000 × g force for 5 min to collect the DNA eluate. 13. Transfer the DNA extract into a clean tube. Extracts can be temporarily stored in a refrigerator (4°C), but a freezer (−20°C) is recommended for long-term storage. Between 1 and 5 μl of the DNA extract should be used for PCR depending mainly on the quality of the DNA source (e.g., fresh tissue sample vs. toe pad sample).
136
D.A. Lijtmaer et al.
3.3. PCR Amplification of COI 3.3.1. Primer Selection
1. The target region in birds is the standard animal COI barcode, a 648-bp fragment of the 5¢ end of COI. Primer pairs that have been used to amplify this gene region are shown in Table 1, and corresponding amplicon sizes in Table 2 (see also Fig. 3). For efficient analysis of large numbers of samples, it is desirable to use “universal” primers, i.e., those which work with a broad taxonomic range of birds. To date, the largest number of successful amplifications have utilized the forward BirdF1 and the reverse COIBirdR2 primers (3, 6, 8, 9). Other primer pairs generally effective for avian samples include CO1F + CO1R (16), PasserF1 + PasserR1 (10), and AWCF1 + AWCR6 (12). These four sets of primers should be considered as first-choice primer pairs (combinations of them could also give good results, such as the pair AWCF1 + COIBirdR2 for passerines; ref. 12). Other primers should be considered when these recommended first options fail. The forward primer FalcoFA, for example, has been shown to work well in cases in which the combination BirdF1 + COIBirdR2 tended to fail (3). In situations where DNA yields are low (e.g., degraded samples), one of us (KCRK) found that a nested PCR approach often succeeds when standard amplification attempts fail. The primer pair LTyr + COI907aH2 (13) can be used for an initial PCR and the amplified fragment can then be used as a template for a second PCR using the primer pair COIaRt + COI748Ht (13). The latter primer pair is also used for sequencing. 2. The aforementioned primers are designed to amplify as a single fragment the entire barcode region (or an even longer portion of the mitochondrial genome) and are generally effective when using high-quality DNA (i.e., obtained from frozen or ethanolpreserved tissue samples). For many species or geographic regions, however, these kinds of tissue samples are not available. In such cases, traditional museum collections of study skins or skeletons can be sampled. The drawback of using historical samples is that their DNA is usually highly degraded making full-length barcode amplification usually unsuccessful. In these cases, short, overlapping fragments (each of them not longer than 300–400 bp) must be amplified using internal primers. Two groups of primers used to amplify relatively short fragments are shown in Table 3 and Fig. 4, one consisting of four primers that generate the barcode in two fragments (6) and the other consisting of six primers that generate the barcode in three fragments (12).
3.3.2. PCR mixture
1. The ingredients of the PCR mixture are detailed in Table 4 (using the reagents listed in Subheading 2.3). This recipe should be followed when performing PCR reactions in 12.5 μl volumes, which has the advantage of reducing the total amount
Orientation
F
R
R
R
F
R
R
F
R
F
R
F
R
F
F
R
R
R
F
R
F
R
R
Name
BirdF1
BirdR1
BirdR2
BirdR3
FalcoFA
VertebrateR1
COIbirdR2
CO1-ExtF
CO1-ExtR
PasserF1
PasserR1
AWCF1
AWCR6
LTyr
COIaRt
COI748Ht
COI745h2
COI907aH2
CO1F
CO1R
L6615
H10884
H8121
20
23
23
26
26
23
25
23
21
25
26
25
26
24
26
26
26
26
27
22
28
25
26
Length
1,478
4,260
−30
704
51
905
747
746
49
−24
794
−2
708
52
1,551
−2
746
707
51
1,064
747
747
51
Location
(47)
(46)
(46)
(16)
(16)
(13)
(13)
(13)
(13)
(13)
(12)
(12)
(10)
(10)
(9)
(9)
(6)
(3)
(3)
(2)
(2)
(2)
(2)
Primary reference
(4, 5)
(4, 5)
(11)
(8, 9)
(3, 7, 9)
(3, 6–9, 37)
Additional references
DNA Barcoding Birds: From Field Collection to Data Analysis
GGGCAGCCRTGRATTCAYTC
GGRTCRAANCCRCAYTCRTANGG
CCYCTGTAAAAAGGWCTACAGCC
ACTTCTGGGTGGCCAAAGAATCAGAA
TTCTCGAACCAGAAAGACATTGGCAC
GTRGCNGAYGTRAARTATGCTCG
ACRTGNGAGATRATTCCRAANCCNG
TGGGARATAATTCCRAAGCCTGG
AACAAACCACAAAGATATCGC
TGTAAAAAGGWCTACAGCCTAACGC
ATTCCTATGTAGCCGAATGGTTCTTT
CGCYTWAACAYTCYGCCATCTTACC
GTAAACTTCTGGGTGACCAAAGAATC
CCAACCACAAAGACATCGGAACC
AACCAGCATATGAGGGTTCGATTCCT
ACGCTTTAACACTCAGCCATCTTACC
ACGTGGGAGATAATTCCAAATCCTGG
TAGACTTCTGGGTGGCCAAAGAATCA
TCAACAAACCACAAAGACATCGGCAC
AGGAGTTTGCTAGTACGATGCC
ACTACATGTGAGATGATTCCGAATCCAG
ACGTGGGAGATAATTCCAAATCCTG
TTCTCCAACCACAAAGACATTGGCAC
Sequence (5¢–3¢)
Table 1 Avian DNA barcode primers [primer name, orientation, sequence, length, position of 3¢ nucleotide relative to COI start codon [designated position 0], and references are shown]
7 137
PasserF1
FalcoFA
CO1F
BirdF1
COIaRT
AWCF1
CO1-ExF
LTyr
L6615
Forward
704
CO1R
Reverse
707
705
746
799
747
746
750
749
740
847
976
1,060
1,551
1,605
4,336
VertebrateR1 PasserR1 COIbirdR2 BirdR1 BirdR2 COI748Ht AWCR6 COI907aH2 BirdR3 H8121 CO1-ExtR H10884
Table 2 Primer pairs that have been successfully used to obtain bird barcodes and sizes of the amplified fragment in base pairs (Sizes of fragments obtained with first-choice primer sets are in bold)
138 D.A. Lijtmaer et al.
7
DNA Barcoding Birds: From Field Collection to Data Analysis
139
Fig. 3. Schematic of avian DNA barcode primers and COI landmarks.
Table 3 Primers used to obtain the avian DNA barcode when working with degraded DNA
Primer
Primer sequence (5¢–3¢)
Primer 3¢ end Original Primer location relative reference length to COI start codon for the primer
BirdF1
TTCTCCAACCACAAAGACATTGGCAC
26
52
(2)
AvMiF1
CCCCCGACATAGCATTCC
18
285
(6)
AvMiR1
ACTGAAGCTCCGGCATGGGC
20
411
(6)
COIbirdR2 ACGTGGGAGATAATTCCAAATCCTGG
26
747
(6)
AWCF1
CGCYTWAACAYTCYGCCATCTTACC
25
−2
(12)
AWCintF2
ATAATCGGAGGCTTCGGAAACTGA
24
245
(12)
AWCintF4
TCCTCAATCCTGGGAGCAATCAACTT
26
493
(12)
AWCintR2 ATGTTGTTTATGAGTGGGAATGCTATG 27
275
(12)
AWCintR4 TGGGAKAGGGCTGGTGGTTTTATGTT 26
510
(12)
AWCintR6 GGATTAGGATGTAGACTTCTGGGTG
720
(12)
25
The top four primers generate two overlapping fragments and the bottom six primers generate three shorter, overlapping fragments (see Fig. 4 for a scheme showing how to combine each set of primers)
of reagents needed (and thus the cost of each reaction) and allows sequencing without cleanup because primers and dNTPs are consumed during the PCR reaction. Always prepare more volume than needed to account for pipetting error and dead volumes (e.g., prepare enough PCR mix for 100 reactions to
140
D.A. Lijtmaer et al.
Fig. 4. Schematic of avian DNA barcode primers that can be used to amplify short, overlapping fragments when dealing with degraded DNA.
Table 4 Recipe for the PCR mix (this recipe is for using 2 ml of DNA extract, but the volume of ddH2O can be adjusted to use between 1 and 4 ml of DNA template) Reagent
Amount for 1 reaction (ml)
Amount for 100 reactions (one plate) (ml)
10% Trehalose
6.25
625
ddH2O
2
200
10× Buffer
1.25
125
50 mM MgCl2
0.625
62.5
10 μM forward primer
0.125
12.5
10 μM reverse primer
0.125
12.5
10 mM dNTPs
0.0625
6.25
Taq polymerase (5 U/μl)
0.06
6
Total
10.5
1,050
DNA template
2 μl per well or tube
amplify an entire 96-well plate, see Table 4). Due to the high efficiency of the Platinum taq, it is important to minimize the risks of contamination (see Note 29 for recommendations). 3.3.3. Thermal Cycling Programs
1. The amplification parameters for first-choice primer sets applied to high-quality DNA are outlined in Table 5. The thermal cycle parameters for primer sets used for degraded DNA are outlined in Table 6. For programs used for other primer pairs, please check the references listed in Table 1. 2. PCR success can be visualized on 2% agarose gels. If working with 96-well plates, we recommend the use of the Invitrogen E-gel 96 system.
7
DNA Barcoding Birds: From Field Collection to Data Analysis
141
Table 5 Thermocycler parameters for first-choice primer sets for high-quality DNA Primer pair
Thermocycle program
BirdF1 + COIbirdR2
94°C for 1 min, 5 cycles (94°C for 1 min, 45°C for 40 s, 72°C for 1 min), 35 cycles (94°C for 1 min, 51°C for 40 s, 72°C for 1 min), 72°C for 5 min
CO1F + CO1R
94°C for 2 min, 25 cycles (94°C for 20 s, 48°C for 45 s, 72°C for 30 s), 72°C for 3 min
PasserF1 + PasserR1
95°C for 3 min, 40 cycles (94°C for 1 min, 58°C for 40 s, 72°C for 1.5 min), 72°C for 5 min
AWCF1 + AWCR6
94°C for 2 min, 35 cycles (94°C for 30 s, 57.5°C for 30 s, 72°C for 30 s), 72°C for 4 min
Table 6 Thermocycle parameters for primer sets used to amplify degraded DNA
3.4. Cycle Sequencing 3.4.1. Sequencing Mixture
3.4.2. Thermal Cycling Program
Primer set
Thermocycle program
BirdF1 + AvMiR1 AvMiF1 + COIbirdR2
94°C for 1 min, 25 cycles (94°C for 1 min, 45°C for 1.5 min, 72°C for 1.5 min), 35 cycles (94°C for 1 min, 55°C for 1.5 min, 72°C for 1.5 min), 72°C for 5 min
AWCF1 + AWCintR2 AWCintF2 + AWCintR4 AWCintF4 + AWCR6
94°C for 2 min, 10 cycles (94°C for 20 s, 55°C for 20 s, 72°C for 20 s), 30 cycles (94°C for 20 s, 50°C for 20 s, 72°C for 20 s), 72°C for 4 min
The recipe for the sequencing mix is detailed in Table 7. This recipe includes a stabilizer (i.e., 10% trehalose) so that premade mixes can be stored in a −20°C freezer for up to 3 months. The primer used depends on those used during PCR. For some primer pairs, unique primers are introduced for sequencing (see ref. 13). For highthroughput sequencing, M13 tails can be added to PCR primers to streamline cycle sequencing reactions (34). Cycle sequencing should generally involve the following thermal cycle: 96°C for 2 min; 30 cycles of 96°C for 30 s, 55°C for 15 s, and 60°C for 4 min; then hold at 4°C until samples are removed from the thermocycler.
142
D.A. Lijtmaer et al.
Table 7 Recipe for the sequencing mix (this recipe is for using 1 ml of DNA extract)
3.4.3. Sequencing Clean-up
Reagent
Amount for 1 reaction (ml)
Amount for 100 reactions (one plate) (ml)
BigDye Terminator v3.1
0.25
25
5× ABI sequencing buffer
1.875
187.5
10% Trehalose
5
500
10 μM sequencing primer
1
100
ddH2O
0.875
Total
9
DNA template
1 μl per well or tube
87.5 900
The following protocol, adapted from that developed at the CCDB (32), details how to clean cycle sequencing reactions using the Sephadex method in 96-well plate format (plates are best prepared two at a time to provide a balance for centrifugation steps). 1. Measure out Sephadex G-50 proportions for a 96-well plate using a multiscreen column loader (Millipore), and then invert over a 96-well filter plate with 0.45 μm pore size. 2. Add 300 μl of ultrapure water to each well, and then allow the plate to sit for at least 1 h (alternatively, plates can be left overnight in a refrigerator at 4°C). 3. Assemble the filter plate with hydrated Sephadex into a sandwich with a 96-well microtiter catch plate. Centrifuge at 750 × g force for 3 min to remove the water from the well. Discard the flow through (the collection plate can be reused for this wash step in the future). 4. Pipette the entire contents of the sequence reaction onto the centre of the Sephadex columns. 5. Add 25 μl of 0.1 mM EDTA pH 8.0, to each well of a final collecting 96-well plate. 6. Place the filter plate over the final collecting plate (pay careful attention to plate orientation), and then centrifuge at 750 × g force for 3 min. 7. Discard Sephadex from the filter plate. Dry the contents of the final collection plate and seal once completely dry.
7
3.5. Data Analysis 3.5.1. Sequence Assembly and Verification
DNA Barcoding Birds: From Field Collection to Data Analysis
143
Bidirectional sequencing—a requisite for high-confidence base calls and GenBank keyword barcode compliance—necessitates contig assembly from forward and reverse sequencing reads. Several programs exist that can facilitate this process through automation (e.g., Sequencher or CodonCode). Assembled contigs should then be aligned. If no ambiguous base calls occur at the end of the sequences (i.e., sequences are of full length between primer-binding sites) or are relatively few, then sequences may be easily aligned by eye. Otherwise, sequence alignment software may be required (e.g., MEGA). Amino acid translations should be carefully scrutinized for rare mutations, which may be indicative of errors introduced during contig assembly.
3.5.2. Tree Based Verification
Newly obtained sequences should be reviewed for possible sources of error, including contamination, misidentifications, and pseudogenes. Most of these are most readily identified via phylogenetic methods, such as tree construction. Sequences uploaded to BOLD may be easily reviewed using the “Taxon ID Tree” tool under the “Sequence Analysis” menu, which generates a neighbor-joining tree of the selected sequences. The more species—and specimens per species—one includes in this analysis, the better chance one has to detect possible sources of error. When including large numbers of sequences, trees can be colorized based on the sequence age to highlight the specimens that were recently added to BOLD and one wants to check.
3.5.3. Contamination
Contamination may originate from lab products (which involve common laboratory species, such as Mus musculus or Sus domestica), from cross-well contaminants when using 96-well plates, or from diverse sources when using samples obtained from historical specimens (such as toe pad samples from museum skins). The former is readily identifiable, while cross-well contamination can usually be detected when the sequences obtained from two samples of the plate that belong to different species are identical, particularly if these species are quite different from each other and not likely to be confused (Fig. 5). However, cross-well contamination might be more challenging to confirm when closely related species are processed in the same plate (see Note 25). Sequences obtained from degraded DNA should be carefully scrutinized for accuracy because contaminant DNA can outperform that which is targeted— contamination should be suspected if there is an unexpected result.
3.5.4. Misidentifications
If lab errors and contamination have been ruled out, disagreements between specimen identification and barcode results should prompt the inspection of voucher materials. This is most pivotal when the species indicated by the barcode is similar to the one originally identified based on morphology (Fig. 6). In these cases, the identification of the specimen should be carefully reviewed.
144
D.A. Lijtmaer et al.
Fig. 5. An example of a BOLD species ID tree that depicts a cross-well contamination. Note the presence of a sequence theoretically belonging to a specimen of Poospiza torquata placed within the haplogroup of Cranioleuca pyrrophia. The evidence that this is likely a case of contamination includes two aspects: (a) the sequence is identical to others in the same plate (note that the process ID of the sample of P. torquata is LBARG050-10, and there are two other identical sequences from close wells in the plate: LBARG048-10 and LBARG058-10) and (b) P. torquata, which belongs to the family Emberizidae, is quite different from C. pyrrophia, which is a furnarid, and therefore an identification error can be ruled out.
Fig. 6. An example of a BOLD species ID tree that flags a possible misidentification. Note that Saltator coerulescens and S. similis are clearly separated in the neighbor-joining tree, but one specimen of S. similis (MACN-Or-ct 5072) is placed within the S. coerulescens clade. Because juveniles of S. coerulescens resemble the adults of S. similis, it is likely that a juvenile of S. coerulescens was collected and misidentified in the field as S. similis. The voucher has to be reanalyzed in cases like this, which is the main reason why it is so important to use vouchered samples for barcoding projects.
7
DNA Barcoding Birds: From Field Collection to Data Analysis
145
3.5.5. NuclearMitochondrial Pseudogenes (Numts)
Numts are copies of mitochondrial genes that have been translocated to the nuclear genome. These copies are typically nonfunctional and, thus, accumulate nonsensical mutations, such as frameshifts and stop codons. These features usually allow pseudogenes to be rapidly identified. Full-length COI pseudogenes are uncommon but might be more frequently encountered when working with avian blood samples. In exceptional cases, characteristic features might be absent from a pseudogene, in which case a more thorough phylogenetic analysis may be required to properly identify it (21).
3.5.6. Assessing Species Resolution of DNA Barcodes
The “Nearest Neighbor Summary” tool, available under the “Sequence Analysis” menu in BOLD, can be used to identify low values of interspecific variation. Alternatively, neighbor-joining trees can also be used to highlight species that fail to produce independent haplogroups. Species pairs with highly similar sequences can be subjected to character-based analysis (35, 36) to identify diagnostic character states (i.e., single-nucleotide polymorphisms) that distinguish otherwise very similar sequences.
3.5.7. Identifying Divergent Intraspecific Lineages
The “Distance Summary” tool, available under the “Sequence Analysis” menu in BOLD, can be used to identify species with high levels of intraspecific variation, which can be indicative of cryptic species. Alternatively, neighbor-joining trees may be generated with bootstrap support to identify lineages that garner stronger statistical support when clustered independently rather than as one cohesive group.
3.5.8. Identifying Unknown Specimens
If barcode sequences have been acquired for the purpose of species identification (as opposed to generating a reference library), then these may be identified singly using either the BOLD Identification Engine (BOLD-IDS) or the Basic Local Alignment Search Tool (BLAST) available from NCBI (37). The main advantage of using the former system is that BOLD includes not only the public sequences that are available in GenBank, but also those that belong to particular projects, which are not visible to all users but are part of the database searched by the identification engine, increasing in this way the chances of a correct identification. In addition, identifications in BOLD can not only be done simply by sequence similarity (as in a BLAST search), but also using a tree-based approach.
4. Notes 1. It is usually necessary to obtain a permit to collect whole bird specimens, blood samples, or even feathers. A transit permit is also generally necessary to move specimens or samples between provinces/states within each country. A permit (or a series of
146
D.A. Lijtmaer et al.
permits) is usually also needed to export/import tissue samples or DNA extracts. If samples originate from a species protected by the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES), then an additional permit is needed. It is essential to check national regulations before starting any barcoding project that potentially includes collection or movement of tissue samples or DNA extracts across borders. 2. Usually small- to medium-sized birds (ranging from hummingbirds to doves) can be captured with mist nets and larger species are hunted using firearms. There are also special types of nets used for particular groups of birds, such as cannon- or rocket-projected nets used for capturing shorebirds. 3. Weigh the guanidine thiocyanate first, add the required volumes of stock solutions and part of the ddH2O needed to reach the final volume, vigorously mix on magnetic stirrer with heater until the guanidine thiocyanate is fully dissolved, and finally add more ddH2O if necessary (when working at a smaller scale and preparing smaller volumes in a tube that cannot be placed in a magnetic stirrer, the solution can be warmed at 56°C and mixed with a vortex). If any recrystallization occurs, prewarm the solution at 56°C to dissolve the guanidine thiocyanate before using it. 4. The use of Platinum Taq polymerase (Invitrogen) has several advantages compared to the standard Taq, including higher success rate, higher amount of amplicons produced per sample, the need of a “hot start” for activation (which reduces amplification of nonspecific fragments), and stability at room temperature. 5. The use of trehalose stabilizes the PCR and allows freezing of aliquoted PCR mixes, which can simplify and accelerate workflow in high-throughput facilities. 6. For example, in studies supported by the funding sources of the International Barcode of Life project (iBOL), ten specimens per species is the upper limit. This is because the objective is to maximize the number of species represented in the database. However, in the case of species for which two or more lineages with deep genetic divergence are found, one might want to include more individuals to better study the genetic structure of the species. In fact, if the divergence between lineages suggests that they have been isolated for a long period of time and are evolving independently, up to ten specimens per lineage might be sampled for barcoding. 7. Depending on the characteristics of the collecting trip, specimens can be frozen in a freezer or in a cooler containing dry ice. Wet ice should be avoided because of its humidity and higher temperature, which does not guarantee that all specimens in the cooler will be kept frozen.
7
DNA Barcoding Birds: From Field Collection to Data Analysis
147
8. Other options are available for long-term storage of tissue samples at room temperature or in a refrigerator, such as drying the sample on ceramic beads or using FTA paper, but nitrogen or ultracold freezers are the most widely used and have been demonstrated to be effective for long-term storage. 9. Even though the sample is fixed, it is highly recommended to store the tube in an ultracold freezer or in nitrogen once it is deposited in the permanent collection if this is possible. 10. Ethanol should be replaced a few days after placing the sample inside the tube. This is because the water in the tissue sample is replaced by ethanol and it is released to the tube, thus diluting the ethanol. This is particularly relevant when the sample is large relative to the amount of ethanol. 11. We recommend to write the identification of the tube contents on adhesive labels with a pencil (covering it with tape), given that it is common for inked labeling to wear off after extended periods in an ultracold freezer or liquid nitrogen. In the case of samples fixed with ethanol, it is particularly important to use a pencil or to make sure that the marker is alcohol-proof because most permanent markers are only waterproof and are easily removed by ethanol (even by the ethanol vapors that can accumulate inside the boxes or bags in which the tubes are stored). Scratching the information on the tube is a highly discouraged alternative because it is unpractical and the data is later difficult to retrieve. 12. Freezing the sample is not recommended for some lysis buffers due to the tendency of some of their components to precipitate. In this case, we recommend keeping the samples in a refrigerator (particularly for long-term storage). 13. Vouchers are vital because they allow confirming the identification of species. In addition, they provide important information (e.g., about morphology) that can complement the conclusions reached through the DNA analysis. The importance of collecting bird specimens and preserving vouchers in addition to tissue samples has been emphasized in the literature (38–43). 14. There are different standards for vouchers, depending on the accuracy with which they permit species identification. The “gold standard” for most birds is a study skin from an adult male in breeding plumage, but other options are also valid when these ideal conditions cannot be met, including the use of juveniles or females (which might be as useful as males for species that lack sexual dimorphism) and the preparation of skeletons or ethanol-preserved specimens (ideally, in at least 96% ethanol). 15. We advise to preserve as many sources of information from the specimen as possible. The ideal situation is to prepare a study
148
D.A. Lijtmaer et al.
skin and keep a partial skeleton, including the bones that are retired from the skin during preparation. Other materials, such as internal organs, the syrinx, stomach contents, or parasites, can also be preserved. 16. When blood samples are obtained and the individuals are not collected (as in the case of rare or endangered species), we recommend taking diagnostic photographs before the bird is released to serve as e-vouchers. 17. For projects using preexisting museum collections, the presence—and type—of vouchers should be considered when selecting samples. 18. This is particularly relevant when obtaining an e-voucher of a specimen that is bled and then released. However, it is also useful to take pictures of the living bird even if it will be collected because some characteristics might be better observed in the individual when it is alive (such as eye color, for example). Pictures can also aid in confirming the identification of the specimen after returning from the field (particularly in cases when preparation of vouchers is not done immediately). 19. It is very useful to store the data associated with the specimens in a database as compatible as possible with the data submission spreadsheet to minimize the work needed to upload this information to BOLD. 20. The toe pad is the best source of DNA from study skins. This is because the contact with preservatives that may damage DNA is reduced in this area and because the risk of crosscontamination is also minimized (particularly if the sample is obtained at some depth and not from the toe pad surface). 21. Use very small amounts of tissue. Larger samples complicate the extraction process rather than facilitating it. A rule of thumb is that the tissue sample is big enough as long as it can be seen with the naked eye. 22. Dissection instruments used for transferring tissue samples to the plate (or tube) should be sterilized between samples. This can be done using a DNA-removing detergent (such as ELIMINase). The instrument should be placed for a few seconds in the detergent and then washed three times using three different water containers (this way, the concentration of detergent decreases in each subsequent container and after the third wash, there should be no detergent left on the instrument). Alternatively, instruments can be sterilized with bleach or a flame (although the latter can damage the instruments much more than the detergent). 23. When working with toe pad samples, it is recommended to rehydrate and soften the tissue before digestion. Samples can be preincubated in phosphate-buffered saline (PBS) for 24 h
7
DNA Barcoding Birds: From Field Collection to Data Analysis
149
before digesting them with the Lysis Mix (44). A recipe for PBS includes the following final concentration of components: 137 mM NaCl, 2.7 mM KCl, 10 mM Na2HPO4, 2 mM KH2PO4, adjusted to pH 7.4. Note that the same plates or tubes that are used for the extraction can be used for the incubation with PBS, in which case the PBS should be pipetted out of each well or tube before adding the Lysis Mix (it is recommended to pulse centrifuge the plate or tube for a few seconds after pipetting the PBS and then pipette again any leftovers before adding the Lysis Mix). 24. When using feathers as a DNA source, undissolved keratin from feather barbs and barbules may clog the filter plates, obstructing DNA extraction. When working with larger feathers (i.e., rectrices), isolate the section of the feather shaft containing the superior umbilicus and use only this for your sample. When working with smaller feathers (i.e., contour feathers from passerine birds), feather keratin may be digested by adding 20 μl of 1 M dithiothreitol (DTT) solution to the Lysis Mix for each sample. Alternatively, DNA may be extracted from feathers using a Chelex-based method (45), but this results in a poor-quality DNA extract. 25. Because cross-well contamination between conspecific samples is virtually impossible to detect, we recommend not placing tissue samples from the same species in contiguous wells. 26. It is always a good practice to clean the bench top with ethanol before starting the extraction protocol and to change gloves if they touch possible sources of contamination. Furthermore, pipettes used for the extraction protocol should never be used to handle PCR products. These caveats are particularly important when extracting DNA from samples obtained from historical specimens (such as toe pad samples from study skins). In this case, change gloves often, use filter tips, and work as isolated as possible from other areas of the laboratory in which other samples, DNA extracts, or PCR products are handled. 27. In the case of samples obtained from toe pads or feathers in which digestion tends to be more complicated, longer incubation periods might be necessary to completely digest the tissue. Incubate samples for 24 h or until there is no visible undegraded tissue. Adding 2–3 μl of proteinase K (20 mg/ml) after the first 6 h of incubation is recommended. 28. Square-well blocks can be washed with a DNA-removing detergent, autoclaved, and reused. 29. To minimize the risks of contamination, always clean the bench top before preparing the PCR mix, change gloves if they touch any contaminants, add DNA template lastly after reagents have been returned to the freezer, and try not to work with PCR
150
D.A. Lijtmaer et al.
products in the area where PCR mix is prepared. Ideally, a different set of pipettes should be used for handling PCR reagents and PCR products (and a third one for performing DNA extraction). Contamination is particularly problematic when amplifying the barcode from an extract containing degraded DNA (such as with toe pad samples) because a fragment of the nondegraded, contaminant DNA might have higher chances of being amplified than the target DNA. In these cases, it is vital to be extra careful; change gloves often, always use filter tips to prepare the PCR mix, and work as isolated as possible from other areas of the laboratory in which other samples, DNA extracts, or PCR products are handled. To detect contamination of reagents, always include a negative control.
Acknowledgments Our work related to barcoding has been possible thanks to the financial support provided by the National Research Council of Argentina (CONICET), the Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT), Lounsbery Foundation, Fundación Williams, the Consortium for the Barcode of Life (CBOL), the iBOL, the International Development Research Centre of Canada (IDRC), and the Biodiversity Institute of Ontario—Canadian Centre for DNA Barcoding (BIO-CCDB). We also thank the authorities of National Fauna and the provincial offices of fauna of Argentina, the National Parks Administration of Argentina, and Fundación Pearson. Finally, we thank N. Ivanova and A. Borisenko for their invaluable help in diverse aspects of the barcoding process. References 1. Stoeckle M, Winker K (2009) A global snapshot of avian tissue collections: state of the enterprise. Auk 126:684–687 2. Hebert PDN, Stoeckle MY, Zemlak TS, Francis CM (2004) Identification of birds through DNA barcodes. PLoS Biol 2:1657–1663 3. Kerr KCR, Stoeckle MY, Dove CJ et al (2007) Comprehensive DNA barcode coverage of North American birds. Mol Ecol Notes 7:535–543 4. Vilaça ST, Lacerda DR, Sari EHR, Santos FR (2006) DNA-based identification applied to Thamnophilidae (Passeriformes) species: the first barcodes of Neotropical birds. Revista Bras Ornitol 14:7–13 5. Chaves AV, Clozato CL, Lacerda DR et al (2008) Molecular taxonomy of Brazilian tyrantflycatchers (Passeriformes: Tyrannidae). Mol Ecol Resour 8:1169–1177
6. Kerr KCR, Lijtmaer DA, Barreira AS et al (2009) Probing evolutionary patterns in Neotropical birds through DNA barcodes. PLoS One 4:e4379. doi:10.1371/journal. pone.0004379 7. Yoo HS, Eah JY, Kim JS et al (2006) DNA barcoding Korean birds. Mol Cells 22:323–327 8. Kerr KCR, Birks SM, Kalyakin MV et al (2009) Filling the gap – COI barcode resolution in eastern Palearctic birds. Front Zool 6:29 9. Johnsen A, Rindal E, Ericson PGP et al (2010) DNA barcoding of Scandinavian birds reveals divergent lineages in trans-Atlantic species. J Ornithol 151:565–578 10. Lohman DJ, Prawiradilaga DM, Meier R (2009) Improved COI barcoding primers for Southeast Asian perching birds (Aves: Passeriformes). Mol Ecol Res 9:37–40
7
DNA Barcoding Birds: From Field Collection to Data Analysis
11. Lohman DJ, Ingram KK, Prawiradilaga DM et al (2010) Cryptic genetic diversity in “widespread” Southeast Asian bird species suggests that Philippine avian endemism is gravely underestimated. Biol Cons 143:1885–1890 12. Patel S, Waugh J, Millar CD, Lambert DM (2009) Conserved primers for DNA barcoding historical and modern samples from New Zealand and Antarctic birds. Mol Ecol Res 10:431–438 13. Tavares ES, Baker AJ (2008) Single mitochondrial gene barcodes reliably identify sister-species in diverse clades of birds. BMC Evol Biol 8:81 14. Sanín C, Cadena CD, Maley JM et al (2009) Paraphyly of Cinclodes fuscus (Aves: Passeriformes: Furnariidae): implications for taxonomy and biogeography. Mol Phylogenet Evol 53:547–555 15. Lijtmaer DA, Kerr KCR, Barreira AS et al (2011) DNA barcode libraries provide insight into continental patterns of avian diversification. PLoS One 6: e20744. doi:10.1371/journal.pone.0020744 16. Dove CJ, Rotzel NC, Heacker M, Weigt LA (2008) Using DNA barcodes to identify bird species involved in birdstrikes. J Wildlife Manag 72:1231–1236 17. Marra PP, Dove CJ, Dolbeer R et al (2009) Migratory Canada geese cause crash of US Airways Flight 1549. Front Ecol Environ 7: 297–301 18. Waugh J, Evans MW, Millar CD, Lambert DM (2010) Birdstrikes and barcoding: can DNA methods help make the airways safer? Mol Ecol Res. doi:10.1111/j.1755-0998.2010.02884.x 19. Alcaide M, Rico C, Ruiz S et al (2009) Disentangling vector-borne transmission networks: a universal DNA barcoding method to identify vertebrate hosts from arthropod bloodmeals. PLoS One 4:e7092 20. Robert M, Vaillancourt MA, Drapeau P (2010) Characteristics of nest cavities of Barrow’s Goldeneyes in eastern Canada. J Field Ornithol 81:287–293 21. Kerr KCR (2010) A cryptic, intergeneric cytochrome c oxidase I pseudogene in tyrant flycatchers (family: Tyrannidae). Genome 53: 1103–1109 22. Blake ER (1949) Preserving birds for study. Fieldiana Tech 7:1–38 23. Johnson NK, Zink RM, Barrowclough GF, Marten JA (1984) Suggested techniques for modern avian systematics. Wild Bull 96: 543–560 24. Bates J, Hackett S, Zink RM (1993) Técnicas y materiales para la preservación de tejidos conge-
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
151
lados. In: Escalante-Pliego P (ed) Curación moderna de colecciones ornitolólogicas. American Ornithologists’ Union, Washington, DC Proctor NS, Lynch PJ (1993) Manual of ornithology: avian structure and function. Yale University Press, New Haven; London Winker K (2000) Obtaining, preserving, and preparing bird specimens. J Field Ornithol 71: 250–297 de Queiroz Piacentini V, Silveira LF, Costa Straube F (2010) A coleta de aves e a sua preservação em coleções científicas. In: Von Matter S, Straube FC, Accordi IA, de Queiroz Piacentini V, Cândido-Jr JF (eds) Ornitologia e conservação: ciencia aplicada, técnicas de pesquisa e levantamento. Technical Books Editora, Rio de Janeiro Roos AL (2010) Capturando aves. In: Von Matter S, Straube FC, Accordi IA, de Queiroz Piacentini V, Cândido-Jr JF (eds) Ornitologia e conservação: ciencia aplicada, técnicas de pesquisa e levantamento. Technical Books Editora, Rio de Janeiro Ivanova NV, Dewaard JR, Hebert PDN (2006) An inexpensive, automation-friendly protocol for recovering high-quality DNA. Mol Ecol Notes 6:998–1002 Ivanova NV, Dewaard JR, Hebert PDN. Protocols. Glass fiber plate DNA extraction. CCDB website: www.dnabarcoding.ca. Last accessed on February 27, 2012 Ivanova NV, Grainger C. Protocols. COI amplification. CCDB website: www.dnabarcoding. ca. Last accessed on February 27, 2012 Ivanova NV, Grainger C. Protocols. Sequencing. CCDB website: www.dnabarcoding.ca. Last accessed on February 27, 2012 Ratnasingham S, Hebert PDN (2007) BOLD: the barcode of life data system. Mol Ecol Notes. www.barcodinglife.org. doi:10.1111/ j.1471-8286.2006.01678.x Ivanova NV, Zemlak TS, Hanner RH, Hebert PDN (2007) Universal primer cocktails for fish DNA barcoding. Mol Ecol Resour 7:544–548 DeSalle R, Egan MG, Siddall M (2005) The unholy trinity: taxonomy, species delimitation and DNA barcoding. Phil Trans R Soc B 360: 1905–1916 Sarkar IN, Planet PJ, Desalle R (2008) CAOS software for use in character-based DNA barcoding. Mol Ecol Resour 8:1256–1259 Altschul SF, Gish W, Miller W et al (1990) Basic local alignment search tool. J Mol Biol 215: 403–410 Goodman SM, Lanyon SM (1994) Scientific collecting. Cons Biol 8:314–315
152
D.A. Lijtmaer et al.
39. Remsen JV Jr (1995) The importance of continued collecting of bird specimens to ornithology and bird conservation. Bird Cons Int 5: 145–180 40. Winker K (1996) The crumbling infrastructure of biodiversity: the avian example. Cons Biol 10:703–707 41. Winker K, Braun MJ, Graves GR (1996) Voucher specimens and quality control in avian molecular studies. IBIS 138:345–346 42. Bates JM, Bowie RCK, Willard DE et al (2004) A need for continued collecting of avian voucher specimens in Africa: why blood is not enough. Ostrich 75:187–191 43. Winker K (2005) Bird collections: development and use of a scientific resource. Auk 122: 966–971
44. Campagna L, Benites P, Lougheed SC et al (2012) Rapid phenotypic evolution during incipient speciation in a continental avian radiation. Proc R Soc B, in press. doi: rspb.2011.2170v1-rspb20112170 45. Walsh PS, Metzger DA, Higuchi R (1991) Chelex 100 as a medium for simple extraction of DNA for PCR-based typing from forensic material. Biotechniques 10:506–513 46. Sorenson MD, Ast JC, Dimcheff DE et al (1999) Primers for a PCR-based approach to mitochondrial genome sequencing in birds and other vertebrates. Mol Phylogenet Evol 12:105–114 47. Sorenson MD (2003) Avian mtDNA primers. http://people.bu.edu/msoren/Bird.mt. Primers.pdf
Chapter 8 DNA Barcoding in Mammals Natalia V. Ivanova, Elizabeth L. Clare, and Alex V. Borisenko Abstract DNA barcoding provides an operational framework for mammalian taxonomic identification and cryptic species discovery. Focused effort to build a reference library of genetic data has resulted in the assembly of over 35 K mammalian cytochrome c oxidase subunit I sequences and outlined the scope of mammalrelated barcoding projects. Based on the above experience, this chapter recounts three typical methodological pathways involved in mammalian barcoding: routine methods aimed at assembling the reference sequence library from high quality samples, express approaches used to attain cheap and fast taxonomic identifications for applied purposes, and forensic techniques employed when dealing with degraded material. Most of the methods described are applicable to a range of vertebrate taxa outside Mammalia. Key words: Mammalia, Molecular diagnostics, Molecular biodiversity, Molecular methods, DNA extraction, PCR, Primers, Sequencing, Cytochrome c oxidase subunit I
1. Introduction Mammals represent a minute fraction of biological diversity, with only ~5,500 species currently recognized. Despite their large size and charismatic nature, garnering much taxonomic scrutiny, it is projected that their global diversity is still severely underestimated with at least 7,000 mammalian species in existence (1). The present rate of species discovery in mammals is surprisingly high (~10% increase in 15 years (1, 2)) with more than half of newly recognized species classified as “cryptic” (2) and their discovery largely attributable to the use of non-morphological character complexes. The recently introduced Genetic Species Concept (3, 4) emphasizes genetic rather than reproductive isolation as key to mammalian species’ definition and utilizes genetic divergence to assess species boundaries. While this concept does not define species based on genetic divergence alone and is thus not analogous to molecular taxonomy, it calls for collecting large amounts of
W. John Kress and David L. Erickson (eds.), DNA Barcodes: Methods and Protocols, Methods in Molecular Biology, vol. 858, DOI 10.1007/978-1-61779-591-6_8, © Springer Science+Business Media, LLC 2012
153
154
N.V. Ivanova et al.
information on inter- and intraspecific genetic divergence as an important first step in the process of elaborating taxonomic hypotheses. This coincides with the DNA barcoding approach (5, 6), which offers an operational framework for species identification and discovery using short, standardized gene fragments. Although cytochrome b has been traditionally used for studying mammalian alpha-taxonomy (e.g., ref. 3), cytochrome c oxidase subunit 1 (COI) was the marker of choice for many groups outside Chordata, such as insects and certain marine invertebrates (7–9), and has been adopted as the standard barcoding marker for the animal kingdom (10). While COI evolves more slowly than cyt b (11), it performs equally well in mammalian diagnostics (12) and can yield complementary data for combined phylogenetic analyses (13). The utility of COI DNA barcoding in mammals has been demonstrated in a range of different studies, including bioinformatics (14–16), verification of field-made taxonomic assignments (17, 18), and assessment of genetic diversity patterns in regional (19, 20) and continental faunas (21). The standard animal DNA barcode region has been used in conjunction with other genes for taxonomic revision (13, 22–24) and new species’ description (25). As of 2010, more than 35 K mammalian sequences from over 1 K species have been assembled at the Biodiversity Institute of Ontario as part of an ongoing international effort to build the reference library of DNA barcodes. The sources from which our samples were obtained ranged from degraded archival specimens to high quality cryopreserved tissue. This experience has helped to outline the scope of mammal-related barcoding projects—from forensic cases to the creation of the reference DNA barcode library—and the array of methodological approaches that optimally suit each particular case. While one should keep in mind that mammalian DNA barcoding also intersects with important topics including the ethics of sampling vertebrate collections (26), approaches to conservation genetics (27), specimen examination (28), and the front-end logistics of the barcoding pipeline (29) for efficient high throughput molecular processing, these topics fall outside the scope of this paper and are discussed elsewhere. Here, we have attempted to summarize the methodological approaches employed for the molecular aspects of DNA barcoding in mammals. The molecular protocols are similar to those used in other animals (30), particularly vertebrates, and can be readily applied when dealing with sample sets which include multiple vertebrate groups. We describe three molecular pathways depending on application. 1. Routine barcoding—the assembly of the reference barcode library from high grade tissue samples. This approach frequently employs high throughput methodology in 96-well plate-based manual applications but is also applicable to robotic liquid handling protocols (31). The outcome is the generation
8
DNA Barcoding in Mammals
155
of high quality genomic DNA extracts suitable for long-term archival and bidirectional reads of the full-length barcode region of COI (657 bp). 2. Express barcoding—applied barcoding used in ecological surveys and rapid taxonomic assessments. Similar to routine methods, the approach generally utilizes high grade tissue sources and high throughput techniques, but can be scaled down for small numbers of samples. Express protocols use comparatively fewer reagents and require simpler equipment to be cost-effective, but the resulting DNA extracts are not of archival grade. Unidirectional short length (420 bp) sequences are often generated which are sufficient for reliable species-level identification in mammals (32). An offshoot of this approach is the design and use of microarrays (12, 14). 3. Forensic barcoding—applied barcoding aimed at generating DNA-based identifications when the DNA is degraded and contaminated with fungi or bacteria or when the samples are otherwise recalcitrant. This approach requires polymerase chain reaction (PCR) primers amplifying shorter fragments of DNA (33) and quality checks for cross-contamination. If the tissue is fresh, quick alkaline lysis can be used for DNA extraction; otherwise, we recommend following the DNA extraction protocol for routine barcoding (31). The protocols below are centered on high throughput approaches towards routine barcoding adopted for laboratories lacking robotic liquid handling equipment, but highlight the methodological deviations required for express and forensic barcoding. The utility of these protocols has been validated against a wide range of mammalian taxa representing all major extant orders.
2. Materials 1. Tissue preservation (routine DNA barcoding): (a) Ethanol 96% (store in a flammable liquid cabinet). (b) ELIMINase (Decon Labs Inc.) for sterilizing instruments. (c) Cryotubes with O-ring caps. (d) Acid-free label paper (Rite-in-the-Rain or equivalent). (e) Fine smooth-tip forceps (Dumont or equivalent; see Note 1). 2. Tissue subsampling and lysis (routine DNA barcoding): (a) Ethanol 96% (store in a flammable liquid cabinet). (b) Hard-shell skirted microplate (Eppendorf twin-tec 96 PCR plate, Fisher Scientific; Fig. 1).
156
N.V. Ivanova et al.
Fig. 1. 96-Well microplate shown from below demonstrating the recommended amount of tissue to sample in each well.
(c) 12-Strip flat PCR caps (Thermo Scientific). (d) ELIMINase (Decon Labs Inc.). (e) 12 × 8 Cryotube holding rack for arranging tubes in plate format. (f) Fine forceps (Dumont or equivalent, see Note 1). (g) KimWipes (Kimberly-Clark, Inc.). (h) Glass jars: one 4 oz for ELIMINase and three 8 oz for tool rinsing. (i) Multichannel pipette 5–200 mL LTS or Liquidator (Rainin); see Note 2. (j) Proteinase K: Proteinase K (20 mg/ml) in 10 mM Tris– HCl pH 7.4, 50% glycerol v/v. (Add 20 ml of water and 0.5 ml of 1 M Tris–HCI pH 7.4, to a vial with 1 g of Proteinase K, close the lid, mix well by inverting, and do not shake. Pour into graduated cylinder, add water to 25 ml, then add 25 ml of glycerol, and mix well on magnetic stirrer. Do not filter.) (k) VLB buffer: 100 mM NaCl, 50 mM Tris–HCl pH 8.0, 10 mM EDTA pH 8.0, 0.5% SDS (20 ml 1 M NaCl, 10 ml 1 M Tris–HCl pH 8.0, 1 g sodium dodecyl sulfate (SDS), water to 200 ml). Store at room temperature for up to 6 months. (l) Lysis mix: Mix 5 ml of VLB and 0.5 ml of Proteinase K in sterile container.
8
DNA Barcoding in Mammals
157
3. DNA extraction [routine DNA barcoding: glass fiber (GF) method]; see Note 3: (a) ELIMINase (Decon Labs Inc.). (b) Ethanol 96% (store in a flammable liquid cabinet). (c) 8-Strip flat PCR caps (Thermo Scientific). (d) GF plate: AcroPrep 96 1 ml filter plate with 1.0 mm GF media (PALL, Catalog No. 5051). (e) Matrix Impact2 pipette, 15–1,250 ml with tips (Matrix Technologies). (f ) Square-well block (PROgene Deep-Well Storage Plate 2 ml, Ultident). (g) PALL collar (SBS Receiver Plate Collar, PALL) (see Note 4). (h) Filter unit (0.2 mm CN membrane, Nalgene, Catalog No. 450-0020). (i) Hard-shell skirted microplate; also used as collection plate for DNA eluates. (j) Aluminum Sealing Film (Axygene Scientific, VWR) (to seal DNA plate). (k) Clear Sealing Film (Axygene Scientific, VWR) (used to cover GF plates during centrifugation). (l) Refrigerated centrifuge with swinging deep-well plate bucket rotor (Allegra 25R, Beckman Coulter) (see Note 5). (m) 1 M Tris–HCI pH 8.0 [26.5 g Trizma base (SigmaAldrich)], 44.4 g Trizma HCl (Sigma-Aldrich, water to 500 ml) (see Note 6 for all stock solutions and buffers). (n) 1 M Tris–HCI pH 7.4 (9.7 g Trizma base, 66.1 g Trizma HCl, water to 500 ml). (o) 0.1 M Tris–HCI pH 6.4 (6.06 g Trizma base, water to 500 ml); dissolve in smaller volume than 500 ml, adjust pH with HCl to 6.4–6.5, and then add water to attain the final volume. (p) 1 M NaCl (29.22 g NaCl, water to 500 ml). (q) 1 N NaOH (20 g NaOH, water to 500 ml). (r) 0.5 M EDTA pH 8.0 (186.1 g EDTA, ~20.0 g NaOH, water to 500 ml). Vigorously mix on magnetic stirrer with heater. Disodium salt of EDTA does not dissolve until pH is adjusted to ~8.0 with NaOH. Briefly rinse NaOH granules with ddH2O in a separate glass before dissolving. Adjust pH to 8.0 with 1 N NaOH, before bringing to the final volume. (s) BB buffer: 6 M guanidinium thiocyanate (GuSCN), 20 mM EDTA pH 8.0, 10 mM Tris–HCl pH 6.4, 4%
158
N.V. Ivanova et al.
Triton X-100 (354.6 g GuSCN, 20 ml 0.5 M EDTA pH.8.0, 50 ml 0.1 M Tris–HCl pH 6.4, 20 ml Triton X-100, water to 500 ml). Store at room temperature in the dark for up to 2 months. Weigh dry components first, then add required volumes of stock solutions, followed by small volume of water; dissolve on a warm water bath while constantly stirring; add water to attain the final volume. Filter while solution is still warm. Although the filtering is optional, it helps to minimize crystallization. If crystallization occurs, heat to 56°C before use to redissolve any salts (caution: GuSCN is an irritant; see Note 7). (t) WB buffer: 60% Ethanol, 50 mM NaCl, 10 mM Tris– HCl pH 7.4, 0.5 mM EDTA pH 8.0 (600 ml ethanol 96%, 23.75 ml 1 M NaCl, 9.5 ml 1 M Tris–HCl pH 7.4, 0.950 ml 0.5 M EDTA pH 8.0, water to 950 ml; do not adjust pH); store at –20°C. (u) BM buffer: 250 ml of BB buffer, 250 ml ethanol 96% (store at room temperature in the dark for up to 1 month). (v) PWB buffer: 260 ml of BB buffer, 700 ml ethanol 96%, 40 ml water (store at room temperature in the dark for up to 1 month). 4. PCR (same for all pathways): (a) 10% Trehalose: 5 g of D-(+)-Trehalose dihydrate (SigmaAldrich, No. 90210-50g; see Note 8), molecular grade water to 50 ml. Store in 1–2 ml aliquots at –20°C. (b) 10× PCR Buffer, Minus Mg (Invitrogen); store at –20°C. (c) 50 mM Magnesium Chloride (Invitrogen); store at –20°C. (d) 10 mM Deoxynucleotide Solution Mix (Promega); store in 100 ml aliquots at −20°C. (e) 100 mM primer stock: Dissolve desiccated primer (IDT DNA, USA) in the amount of water indicated by the manufacturer to produce the final solution of 100 mM (i.e., add the number of nmol × 10 ml of water; see Note 9); store at –20°C. (f ) 10 mM primer stock: 20 ml of 100 mM stock, 180 ml of water; store at –20°C. (g) Platinum Taq DNA Polymerase (Invitrogen); store at –20°C. (h) Eppendorf Mastercycler ep gradient S Thermocycler (Eppendorf). (i) Heat sealer (Eppendorf) (used to apply heat sealing film on PCR plates prior to thermal cycling). (j) Aluminum Sealing Film (Axygene Scientific, VWR) (used to reseal DNA plate after use).
8
DNA Barcoding in Mammals
159
(k) Clear Sealing Film (Axygene Scientific, VWR) (used for temporary cover of PCR plates prior to use). (l) Heat sealing Film (GE Uniseal Al Heat Seal Film, Lab Planet) (used to seal PCR plate prior to thermal cycling). (m) Hard-shell skirted microplate (see Note 10). (n) Swinging bucket centrifuge with microplate rotor (Thermo Scientific). 5. PCR Product Check (same for all pathways): (a) Gel documentation system (AlphaImager, Alpha Innotech). (b) Pre-cast agarose gels (2% E-Gel 96, Invitrogen). (c) E-Base Integrated power supply (Invitrogen). 6. Cycle sequencing reaction (same for all pathways): (a) 10% Trehalose: 5 g of D-(+)-Trehalose dihydrate (SigmaAldrich, Catalog No. T9531-100g), molecular grade water to 50 ml. Store in 1–2 ml aliquots at –20°C. (b) 5× Sequencing Buffer (400 mM Tris–HCl pH 9.0 + 10 mM MgCl2). (c) 100 mM primer stock: Dissolve desiccated primer (IDT DNA, USA) in the amount of water indicated by the manufacturer to produce the final solution of 100 mM (i.e., add the number of nmol × 10 ml of water; see Note 9); store at –20°C. (d) 10 mM primer stock: 20 ml of 100 mM stock, 180 ml of water; store at –20°C. (e) BigDye Terminator v3.1 Cycle Sequencing Kit (Applied Biosystems). (f ) Microplate (any microplate can be used at this stage). (g) AirClean Systems Ductless PCR Workstation (Fisher Scientific). 7. Sequencing reaction cleanup (same for all pathways): (a) Sephadex G50 (Sigma). (b) Acroprep 96 Filter plate, 0.45 mm GHP (PALL Corporation Catalog No. 5030). (c) Pop-7 Polymer for 3730xl DNA Analyzers (Applied Biosystems). (d) 3730xl DNA Analyzer Capillary Array, 50 cm (Applied Biosystems). (e) 10× Running Buffer for 3730xl DNA Analyzers (Applied Biosystems). (f) Collection plate: MicroAmp 96-well reaction plate (Applied Biosystems).
160
N.V. Ivanova et al.
Fig. 2. FTA Elute blotting card with blood blots demonstrating the recommended amount of tissue to sample in each blotting circle.
(g) Hydroclave MC8 International).
Steam
Sterilizer
(Barnstead
(h) AirClean Systems Ductless PCR Workstation (Fisher Scientific). (i) 3730xl DNA Analyzer (Applied Biosystems). (j) 8-Channel Matrix multichannel pipette (Matrix Impact2 pipette, 15–1,250 ml, Matrix Technologies). 8. Tissue preservation (express DNA barcoding: FTA Elute blotting cards; Fig. 2): (a) Small cotton swabs, e.g., ear swabs for liquid tissue (see Note 11). (b) FTA Elute blotting cards (Whatman, GE Healthcare). 9. Tissue subsampling and lysis (express DNA barcoding: FTA Elute blotting cards): (a) Ethanol, 96%. (b) Harris Micropunch (1.2 mm, Sigma-Aldrich). (c) Harris self-healing cutting mat (Sigma Aldrich)—as support surface for blotting and punching. (d) Microplate (Eppendorf twin-tec PCR plate, Fisher Scientific). 10. DNA extraction (express DNA barcoding: FTA Elute blotting cards): (a) Swinging bucket centrifuge with microplate rotor (Thermo Scientific).
8
DNA Barcoding in Mammals
161
11. PCR (express DNA barcoding)—materials listed under item 4. 12. PCR product check (express DNA barcoding)—materials listed under item 5. 13. Cycle sequencing reaction (express DNA barcoding)—materials listed under item 6. 14. Sequencing reaction cleanup (express DNA barcoding)— materials listed under item 7. 15. Tissue preservation (forensic DNA barcoding): materials listed under item 1. 16. Tissue subsampling and alkaline lysis (forensic DNA barcoding)—materials listed under item 2. 17. DNA extraction (forensic DNA barcoding: alkaline lysis); see Note 3: (a) AL buffer: 0.1 N NaOH, 0.3 mM EDTA; pH 13.0 (5 ml 1 N NaOH, 30 ml 0.5 M EDTA pH 8.0). Store in small aliquots at –20°C. (b) NT buffer: 0.1 M Tris–HCl pH 7.0 (6.06 g Trizma base, water to 500 ml). Adjust pH with HCl to 7.0; add water to the final volume. Store in small aliquots at –20°C. 18. PCR (forensic DNA barcoding)—materials listed under item 4. 19. PCR product check (forensic DNA barcoding)—materials listed under item 5. 20. Cycle sequencing reaction (forensic DNA barcoding)— materials listed under item 6. 21. Sequencing reaction cleanup (forensic DNA barcoding)— materials listed under item 7.
3. Methods 1. Tissue sampling and preservation (routine DNA barcoding): (a) Dissect and remove piece of skeletal muscle (see Note 12) with clean scissors/forceps. (b) Fill cryotube with 96% ethanol (see Note 13) and label the tube with individual specimen number (see Note 14) on the outside (ethanol-resistant ink or pencil) or on paper (use ethanol-resistant marker/pencil and acid-free paper). Ensure that at least a 10:1 ratio is maintained between fixative and tissue; e.g., the volume of tissue placed in a 2 ml cryotube should not exceed 5 × 5 × 5 mm. (c) Mince tissue in the tube thoroughly with scissors to allow fixative penetration; place label inside the tube (if applicable).
162
N.V. Ivanova et al.
(d) Between samples, remove visible tissue particles from tool tips, sterilize tool tips with detergent (e.g., ELIMINase) and rinse with several changes of water to remove detergent residue (see Note 15). (e) Replace fixative after 2–10 days of storage (see Note 16). (f) Store tissues at low temperatures (ideally, below 0°C) and away from light (see Note 17). 2. Subsampling and lysis (routine DNA barcoding; see Note 18): (a) Prefill a 96-well microplate with 30 ml (or one drop) of 96% ethanol per well. Cover plate with 12-cap strips. Do not use ethanol if the samples were previously fixed in another medium (see Note 16). (b) Assemble specimens and prepare a map, based on the alpha numeric grid of well and row location of sample locations in 96-well plate (see Note 19). (c) Using forceps, sample ca. 1 mm3 of tissue into each well of the plate. While working, keep only one row uncapped at a time to minimize the chance of error and crosscontamination. (d) Between samples, sterilize forceps by wiping with KimWipe, washing in ELIMINase and rinsing with three changes of distilled water. (e) Seal each row firmly with cap strips. (f) Prior to lysis, centrifuge plate for 1 min at 1,000 × g to remove ethanol and tissue from cap strips. (g) Remove cap strips and evaporate residual ethanol at 56°C (secure plate against workbench surface and remove caps slowly to prevent spraying of well contents). (h) Add 50 ml of Lysis Mix to each well and reseal with sterile 8-cap strips. (i) Incubate at 56°C for >12 h to allow digestion (see Notes 20 and 21). 3. DNA extraction—GF protocol for routine barcoding (see Note 22): This method utilizes a bind–wash–elute approach commonly used in commercial kits for DNA extraction, but delivers similar or even better results at a fraction of the cost. The DNA binds to a GF membrane in the presence of chaotropic salts, while contaminants are washed away using two different wash buffers. After two wash stages and drying, DNA is eluted from membrane using molecular grade water or low-salt buffer (see Note 23). (a) Centrifuge plates with lysed samples [from step 1(i)] at 1,500 × g for 1 min to remove any condensate from cap strips.
8
DNA Barcoding in Mammals
163
(b) Open cap strips (secure plate against workbench surface and remove caps slowly to prevent spraying of lysate). (c) Add 100 ml of BM buffer to each sample using multichannel pipette or Liquidator (see Note 2). (d) Mix lysate by gently pipetting; transfer lysate (about 150 ml) from microplate to corresponding wells of GF plate resting on square-well block. Seal GF plate with clear film. (e) Centrifuge at 5,000 × g for 5 min to bind DNA to GF membrane. (f ) Perform the first wash step: Add 180 ml of PWB buffer to each GF plate well. Seal with new cover and centrifuge at 5,000 × g for 2 min. (g) Perform the second wash step: Add 750 ml of WB buffer to each GF plate well. Seal with new clear film and centrifuge at 5,000 × g for 5 min. (h) Remove clear film and place GF plate over collection microplate. Incubate at 56°C for 30 min to evaporate residual ethanol. (i) Position PALL collar on collection microplate and place GF plate on top. Dispense 50–60 ml of ddH20 (prewarmed to 56°C) directly on each GF plate well membrane to elute DNA (see Note 23) and incubate at room temperature for 1 min. Seal GF plate with clear film. (j) Place plate assembly on clean square-well block to prevent collection plate cracking; centrifuge at 5,000 × g for 5 min to collect eluted DNA. (k) Remove GF plate and discard. (l) Cover DNA plate with strip cap or aluminum PCR foil. (m) Use 1–2 ml of DNA for PCR. DNA can be temporarily stored at 4 or at –20°C for long-term storage. (n) To reuse 2 ml square-well blocks, wash them with hot water and ELIMINase and rinse with deionized water. Dry and expose to UV light for >15 min prior to use. 4. PCR (routine DNA barcoding): M13-tailed primer cocktails are more effective than conventional degenerate primers, allowing barcode work on taxonomically diverse samples to be performed in a high throughput fashion. (a) Select primer cocktails, depending on application (Table 1); refer to volume proportions indicated in the column “Ratio in cocktail” of Table 1 (see also Note 24). (b) Prepare PCR reagent mix using volumes listed in Table 2.
FR1d_t1
FishR2_t1
VF2_t1
FishF2_t1
VR1i_t1
VR1_t1
VR1d_t1
LepR1_t1
VF1i_t1
VF1d_t1
VF1_t1
LepF1_t1
Primer name
Fish Cocktail [C_FishF1t1 + C_FishR1t1] TGTAAAACGACGGCCAGTCGACTAA TCATAAAGATATCGGCAC TGTAAAACGACGGCCAGTCAACCAA CCACAAAGACATTGGCAC CAGGAAACAGCTATGACACTTCAGG GTGACCGAAGAATCAGAA CAGGAAACAGCTATGACACCTCAGG GTGTCCGAARAAYCARAA
Mammal Cocktail (C_VF1LFt1 + C_VR1LRt1] TGTAAAACGACGGCCAGTATTCAAC CAATCATAAAGATATTGG TGTAAAACGACGGCCAGTTCTCAAC CAACCACAAAGACATTGG TGTAAAACGACGGCCAGTTCTCAAC CAACCACAARGAYATYGG TGTAAAACGACGGCCAGTTCTCAAC CAACCAIAAIGAIATIGG CAGGAAACAGCTATGACTAAACTTC TGGATGTCCAAAAAATCA CAGGAAACAGCTATGACTAGACTTC TGGGTGGCCRAARAAYCA CAGGAAACAGCTATGACTAGACTTC TGGGTGGCCAAAGAATCA CAGGAAACAGCTATGACTAGACTTC TGGGTGICCIAAIAAICA
Primer sequence
M13R
M13R
M13F
M13F
M13R
M13R
M13R
M13R
M13F
M13F
M13F
M13F
M13 seq primer
1
1
1
1
3
1
1
1
3
1
1
1
Ratio in cocktail
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
RB, EB
Application
Fish52
MammCOI
Thermocycler program
652
658
(46)
(46)
Product length (bp)a Reference
Table 1 Mammalian primer sets for various applications (RB routine DNA barcoding and reference library, EB express DNA barcoding and ecological surveys, FB forensic DNA barcoding and museum samples)
164 N.V. Ivanova et al.
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Primers for forensic and express barcoding of bats TTCTCAACCAACCACAAAGACATTGG GCATGAGCTGTTACGATTACG CTGGGGCCCTATTAGGTGAT TATATCGGGTGCGCCAATTA GGGGGATTCGGTAATTGATT GGCTAGTGGTGGGTATACGG TACAGTTGAAGCTGGCGTTG AGCTCCAAGGATTGACGAAA TCTCTCTTCACCTAGCCGGA GGCAGTGATTAAAACGGATCA GCCCTCTCTCAATATCAAACAC TAGACTTCTGGGTGGCCAAAGAATCA
Sequencing primers TGTAAAACGACGGCCAGT CAGGAAACAGCTATGAC
VF1b BC1R BC2F BC2R BC3F BC3R BC4F BC4R BC5F BC5R BC6F VR1b
M13F (-21)c M13R (-27)c
RB, EB, FB FB, EB FB, EB FB, EB FB, EB FB, EB FB, EB FB, EB FB, EB FB, EB FB, EB RB, EB, FB
RB, EB RB, EB
FB, EB
FB, EB
RB, EB RB, EB
Application
Seq3.1
ExpressCOI
RatCOI
ExpressCOI
MammCOI54
COIfast
Thermocycler program
161
93
96
134
106
117
702
187
421
658
(50)
(31) This study This study This study This study This study This study This study This study This study This study (49)
(48)
This study
(12)
(47)
Product length (bp)a Reference
M13-tailed primer cocktails are more effective than conventional degenerate primers, allowing barcode work on taxonomically diverse samples to be performed in a high throughput fashion a Product lengths are given without primers b VF1/VR1 are universal vertebrate primers that can be used for some mammal species as a stand-alone primer pair; their tailed modification is used in the M13-tailed mammal cocktail c M13F/M13R are used for sequencing products generated with M13-tailed primers and their cocktails. In all other sequencing reactions, use the same primers as for the PCR reaction
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
N/A N/A
N/A N/A
N/A
Rat primers [BatL5310 + R6036R] CCTACTCRGCCATTTTACCTATG ACTTCTGGGTGTCCAAAGAATCA
AquaF2
RonM_t1
BatL5310 R6036R
M13F
N/A N/A
Ratio in cocktail
N/A
Folmer degenerate [dgLCO-1490 + dgHCO-2198] GGTCAACAAATCATAAAGAYATYGG TAAACTTCAGGGTGACCAAARAAYCA
dgLCO-1490 dgHCO-2198
M13 seq primer
Forward primers for express and forensic barcoding TGTAAAACGACGGCCAGTGGMGCMC CMGATATRGCATTCCC ATCACRACCATCATYAAYATRAARCC
Primer sequence
Primer name
8 DNA Barcoding in Mammals 165
166
N.V. Ivanova et al.
Table 2 PCR reagent mix used in mammal DNA barcoding Each well (ml) regular PCR
96-Well plate (ml) regular PCR
Each well (ml) FTA elute disks
96-Well plate (ml) FTA elute disks
10% Trehalose
6.25
625.0
6.25
625.0
ddH2O
2.00
200
4.00
400
10× Buffer
1.25
125.0
1.25
125.0
50 mM MgCl2
0.625
62.5
0.625
62.5
10 mM primerA
0.125
12.5
0.125
12.5
10 mM primerB
0.125
12.5
0.125
12.5
10 mM dNTPs
0.0625
6.25
0.0625
6.25
Platinum Taq (5 U/ml)
0.060
6.0
0.060
6.0
Total
10.5
1/8 Aliquot
–
1,050 130
12.5 –
1,250 155
(c) Defrost reagents listed in Table 2 (except Taq polymerase) at room temperature; briefly vortex and spin down in a mini-centrifuge. Keep Taq polymerase at –20°C until immediately before use (see Notes 25 and 26); prior to use, spin the tube with Taq polymerase for 10–15 s in a mini-centrifuge. Do not mix Taq polymerase by vortexing or pipetting. (d) Add reagents to a 2 ml tube in volumes listed for “96-well plate” (Table 2). (e) Mix vigorously with vortex or pipette (vortexing traps liquid under the cap of tube necessitating a subsequent 15-s spin in a mini-centrifuge). (f ) Dispense 10.5 ml of PCR mix into well of the 96-well plate (the same pipette tip can be used for all transfers). (g) Add 1–2 ml of DNA template to each well (use new filter pipette tip for each sample). 5. PCR thermocycling (same for all pathways): (a) Place aluminum foil or heat-seal cover over the top of 96-well plate and centrifuge for 1 min at 1,000 × g. (b) Place the plate in a thermocycler block, close the lid and run thermocycling program appropriate for the primer cocktail employed (Table 1). Apply thermal cycling conditions from Table 3. (c) The resulting PCR plate can be stored for several weeks at 4°C or several months at –20°C until ready for sequencing.
8
DNA Barcoding in Mammals
167
Table 3 PCR programs and thermal cycling parameters for different primer sets used in mammal DNA barcoding PCR program
Primer combinations
Thermal cycling conditions
MammCOI
Mammal Cocktail (C_VF1LFt1 + C_VR1LRt1)
94°C for 2 min; 5 cycles (94°C for 30 s, 50°C for 40 s, and 72°C for 1 min); 35 additional cycles (94°C for 30 s, 55°C for 40 s, and 72°C for 1 min); final extension at 72°C for 10 min; then hold indefinitely at 10°C
Fish52
Fish Cocktail (C_FishF1t1 + C_FishR1t1)
94°C for 2 min; 40 cycles (94°C for 30 s, 52°C for 40 s, and 72°C for 1 min); final extension at 72°C for 10 min; then hold indefinitely at 10°C
MammCOI54
421 bp Fragment (RonM_t1 + C_VR1LRt1)
94°C for 2 min; 40 cycles (94°C for 30 s, 54°C for 40 s, and 72°C for 1 min); final extension at 72°C for 10 min; then hold indefinitely at 10°C
MammCOI54
419 bp Fragment (RonM_t1 + C_FishR1t1)
Same as above, but use 52°C for annealing
RatCOI
Rat primers (34) (BatL5310 + R6036R)
94°C for 2 min; 35 cycles (94°C for 30 s, 60°C for 30 s, and 72°C for 1 min); final extension at 72°C for 5 min; then hold indefinitely at 10°C
COIfast
Folmer degenerate primers (dgLCO-1490 + dgHCO-2198)
94°C for 2 min; 5 cycles (94°C for 30 s, 45°C for 40 s, and 72°C for 1 min); 35 additional cycles (94°C for 30 s, 51°C for 40 s, and 72°C for 1 min); final extension at 72°C for 10 min; then hold indefinitely at 10°C
ExpressCOI
~200 bp Fragment (AquaF2 + C_VR1LRt1) or (AquaF2 + C_FishR1t1)
94°C for 2 min; 40 cycles (94°C for 30 s, 51°C for 40 s, and 72°C for 30 s); final extension at 72°C for 10 min; then hold indefinitely at 10°C
6. PCR product check (E-gel, same for all pathways; see Note 27): (a) Preset program EG on Mother E-base; set the run time to 4 min. (b) Remove gel from package and detach plastic comb. Slide gel into electrode connections on Mother E-Base (caution: gel contains ethidium bromide; see Note 27). (c) Dispense 12 ml of ddH2O into each E-gel well. (d) Load 4 ml of PCR product into each corresponding e-gel well. (e) Begin electrophoresis by briefly pressing “pwr/prg” button. Red indicator light should change to green during the run. End of run is signaled by flashing red light and sound alarm; press and release the “pwr/prg” button when finished.
168
N.V. Ivanova et al.
Fig. 3. E-gel image of PCR products generated from an FTA Elute card.
(f ) Remove gel from base and capture a digital image (we use Alpha Imager documentation system; Fig. 3). PCR products can be visualized under any UV-emitting source. (g) If success rate is over 75%, all samples from the PCR plate should be sequenced. Success rates below 75% require hitpicking of amplified products and failure tracking (amplification of failed samples with alternative primer sets) of the remaining samples (see Note 28). Hit-picked PCR products obtained with different M13-tailed primers (e.g., mammal and fish cocktails) can be combined in the same plate for sequencing; ensure that the resulting position of rearranged samples is plotted in the new plate map. 7. Cycle sequencing (same for all pathways): (a) Defrost reagents (Table 4) at room temperature. BigDye is light sensitive and should not be exposed to light for more than a few minutes. Do not vortex undiluted BigDye stock; gently mix by pipetting instead. (b) Prepare “forward” and “reverse” sequencing mixes: Combine forward primer with reagents from Table 4 in a single 2 ml tube in proportions listed under “96-well plate”; repeat the procedure for reverse primer. Mark tubes accordingly. (c) Mix contents of each tube gently but thoroughly by pipetting or vortexing for about 5–10 s (vortexing traps liquid under the cap of tube necessitating a subsequent 15-s spin in a mini-centrifuge).
8
DNA Barcoding in Mammals
169
Table 4 Cycle sequencing reaction recipe used in mammal DNA barcoding Reagents
Each well (ml)
96-Well plate (ml)
Primer
1
104
2.5× SEQ Buffer
1.875
195
BigDye
0.25
26
ddH2O
0.875
91
10% Trehalose
5
520
Subtotal
9
936
DNA template
1–1.5
N/A
Total
10–10.5
N/A
1/8 Aliquot
115
N/A
(d) Assemble “forward” and “reverse” sequencing plates: Dispense 9.0 ml of forward-sequencing mix into each well of an empty 96-well plate; repeat the procedure for reverse mix. Use a new set of pipette tips to transfer forward- and reverse-sequencing mixes (tips can be reused between transfers within each plate). Mark plates accordingly. (e) Add 1–1.5 ml of nonpurified PCR product (see Notes 29 and 30) from the PCR plate [step 6(g)] to each well of the “forward” and “reverse” sequencing plates (use new pipette tip for each well). (f) Place aluminum foil or heat-seal cover over sequencing plates and centrifuge at 1,000 × g for 1 min to collect sequence cocktail and PCR template at the bottom of the wells. (g) Place each sequencing plate in a thermocycler block and start program Seq3.1: initial denaturation at 96°C for 2 min; followed by 30 cycles at 96°C for 30 s, annealing at 55°C for 15 s, and extension at 60°C for 4 min; followed by indefinite hold at 4°C. (h) Store processed sequencing plates for up to 1 week at 4°C in a dark enclosure to avoid degradation of light-sensitive sequencing products (see Note 31). 8. Sequencing cleanup (same for all pathways; see Note 32): (a) Measure dry Sephadex G50 with black column loader into 350 ml PALL filter plate. Prepare two plates to balance
170
N.V. Ivanova et al.
each other or prepare a single plate and appropriate counterbalance. (b) Add 300 ml molecular grade water to plate wells prefilled with Sephadex powder; leave mixture to hydrate overnight at 4°C or for 3–4 h at room temperature before use. (c) Join Sephadex plate with MicroAmp collection plate to catch water flow through and secure with two rubber bands. (d) Balance two sets of plates for centrifuging; use additional rubber bands as needed. (e) Centrifuge at 750 × g for 3 min to remove excess water and generate a packed Sephadex column. (f ) Add the entire sequencing reaction to the center of Sephadex columns by pipette. Do not insert the pipette tip into the column; dispense liquid onto the upper surface of the column. Damaging the column with a pipette tip or dispensing solution onto the side of the column may result in incomplete removal of unincorporated BigDye terminators which will adversely affect sequencing results. (g) Add 25 ml of 0.1 mM EDTA to each well of a new MicroAmp collection plate (see Note 33). (h) Elute clean sequencing reaction by attaching the collection plate containing EDTA to the bottom of Sephadex plate and securing with rubber bands. (i) Balance two sets of plates for centrifuging; use additional rubber bands as needed. (j) Centrifuge at 750 × g for 3 min and remove Sephadex plate. (k) Cover the top of collection plate with septum. (l) Place collection plate into black plate base of capillary sequencer and attach white plate retainer. (m) Stack assembled plates into ABI 3730xl capillary sequencer and import plate records using Plate Manager module of the Data Collection software (Applied Biosystems). (n) Begin sequencing run within Run Scheduler. 9. Tissue sampling and preservation (express DNA barcoding: FTA Elute blotting card; see Note 34): (a) Dissect and remove a 3–4-mm3 piece of skeletal muscle with clean scissors/forceps. If sampling from live animal (see Note 11), collect ca. 10–20 ml of blood on a cotton swab. (b) Dab muscle or cotton swab against blotting circle of the FTA Elute card. Do not oversample (see Note 35).
8
DNA Barcoding in Mammals
171
(c) If employing reusable tools, sterilize them between samples as per step 1(d); if using swabs, discard them after each sample. (d) Map the position of samples on the recording portion of the card (see Note 36). (e) Leave the card to air dry with the blotting portion opened (see Note 37). Do not expose to direct sunlight. (f) Store the card away from light at room temperature in a dry environment or in a sealed bag with desiccant (e.g., silica gel; see Note 38). 10. Tissue lysis (express DNA barcoding: FTA elute blotting card): (a) Wipe Harris mat with ethanol; open FTA Elute card and slide mat under blotting surface (filter paper portion). (b) Punch FTA elute card (filter portion only) using a 1.2 mm Harris Micropunch. (c) Place one punch into each well of 96-well microplate and create sample map as above [step 2(b)]. (d) Between sampling, clean micropunch by punching clean filter paper. 11. DNA extraction—(express DNA barcoding: FTA elute blotting card—muscle blot or blood): (a) Ensure that all supplies are ready. Protocol must be completed in timed consecutive steps (prolonged incubation in water results in DNA loss). (b) Add 100 ml of water to each well of 96-well microplate from step 10(c) using pipette or Liquidator; seal with aluminum film. Vortex plate for 10–15 s and centrifuge immediately for 1 min at 1,000 × g. (c) Aspirate and discard water from each well using pipette or Liquidator (make sure that disks remain in their wells after water is removed). Incubate open plate with disks at 56°C for 5 min to evaporate residual water. Do not cover the plate because disks easily stick to film or cap strips during movement. After drying, disks can be used directly in PCR reaction. 12. PCR (express DNA barcoding): (a) Select primer cocktails for express barcoding (Table 1); refer to volume proportions indicated in the column “Ratio in cocktail” (see also Note 24). (b) Prepare PCR reagent mix using volumes indicated for FTA Elute disks in Table 2. (c) Follow step 4(a–d) for routine barcoding.
172
N.V. Ivanova et al.
(d) Dispense 12.5 ml of PCR mix into each well of plate containing prewashed FTA disks. Change pipette tips after each well. 13. PCR thermocycling (express DNA barcoding)—procedures listed under step 5. 14. PCR product check (express DNA barcoding)—procedures listed under step 6; see also Note 27. 15. Cycle sequencing (express DNA barcoding)—procedures listed under step 7. 16. Sequencing cleanup (express DNA barcoding)—procedures listed under step 8; see also Note 32. 17. Tissue sampling and preservation (forensic DNA barcoding; if applicable)—procedures listed under step 1. 18. Tissue subsampling and lysis (forensic DNA barcoding: alkaline lysis protocol). (a) Follow subsampling step 2(a–g), if applicable; when subsampling for immediate lysis, prefill plate with AL buffer instead of ethanol in step 2(a). 19. DNA extraction (forensic DNA barcoding: alkaline lysis protocol): (a) Add 35 ml of AL buffer to ~0.5–1 mm3 of fresh skeletal muscle or hairs with follicles in tubes or 96-well microplate. (b) Incubate for 5 min in a thermocycler at 95°C or in freshly boiled water in a water bath. (c) Centrifuge for 1 min to remove condensate from caps or plate cover. (d) Add 65 ml of NT buffer and mix by pipetting. (e) Use 1–2 ml of crude lysate for PCR reaction (label PCR plate for reference using sticker or alcohol-resistant marker). Store at –20°C for up to 2 weeks (see Note 39). 20. PCR (forensic DNA barcoding): (a) Select primer cocktails for forensic barcoding (Table 1); refer to volume proportions indicated in the column “Ratio in cocktail” (see also Note 24). (b) Prepare PCR reagent mix using volumes indicated for regular PCR in Table 2. (c) Follow step 4(a–g) for routine barcoding. 21. PCR thermocycling (forensic DNA barcoding)—procedures listed under step 5. 22. PCR product check (forensic DNA barcoding)—procedures listed under step 6; see also Note 27.
8
DNA Barcoding in Mammals
173
23. Cycle sequencing (forensic DNA barcoding)—procedures listed under step 7. 24. Sequencing cleanup (forensic DNA barcoding)—procedures listed under step 8; see also Note 32.
4. Notes 1. Do not use forceps with cross-hatched or serrated tips due to the difficulty of removing tissue remains during sterilization. 2. There are multiple manufacturers of single- and multichannel pipettes; however, pipetting accuracy and design features may vary. The most important feature for a multichannel pipette is the uniformity of tip loading and unloading. Pipettes should be made from durable material; if O-rings are used to seal tips, frequently check their integrity and have spare O-rings available for replacement. In a high throughput facility, Liquidator 96 from Rainin can be utilized for convenient and fast liquid transfers; this device offers manual pipetting of 96 samples at a time. Although the recommended range volume of the Liquidator is 5–200 ml, it can still be used for volumes of 1.5–2 ml. 3. All chemicals used for tissue lysis and DNA extraction should be of molecular biology grade or equivalent—of the highest purity. Wash all labware with ELIMINase and rinse with distilled or deionized dH2O. Weigh reagents using a clean spatula. Use molecular grade doubly distilled (dd) H2O in all buffer formulations. Millipore MilliQ purified water (18 MW) can be used for lysis and DNA extraction buffers, while commercially manufactured molecular grade water is preferred for PCR and sequencing. Do not use DEPC-treated water, as it may inhibit PCR and cycle sequencing reactions. Store molecular grade water in small aliquots to prevent contamination. Filter buffers through a 0.2 mm Nalgene filter into a clean sterile bottle; prepare working aliquots of smaller volume (e.g., 100 ml). Store stock solutions and working aliquots at 4°C. 4. A PALL collar is used to secure a GF plate on top of the Microplate during the elution stage. 5. The centrifuge for DNA extraction should have deep buckets to handle filter plate assemblies and should deliver at least 5,000 × g. 6. To prepare stock solutions and buffers, dissolve salts and other components in a smaller volume than that of the final solution and then add water to attain the final volume. 7. GuSCN does not dissolve without heating (this is an endothermic reaction). Caution: All GuSCN solutions are irritants
174
N.V. Ivanova et al.
and toxic and should be disposed of with care. Use nitrile gloves and goggles at all times and protective mask while handling powder; avoid contact with acids to prevent release of cyanide gas. 8. Some trehalose brands contain traces of pig DNA which may contaminate reactions. 9. To minimize the risk of contamination, do not mix 100 mM stocks by pipetting. After adding water, incubate tubes for 15–30 min at room temperature, vortex for 30 s, and briefly spin tubes in a tabletop mini-centrifuge prior to opening. 10. Although non-skirted microplates can be used in PCR setup, we recommend hard-shell skirted microplates, such as Eppendorf twin-tec 96 PCR plate, to prevent spraying of PCR products while reopening cap strips. Skirted microplates are compatible with heat sealing film, which is more convenient to use in a high throughput setting. Alternatively, 8-cap strips, sealing mats, aluminum-sealing film, or PCR-grade clear film can be used to cover plates prior to thermal cycling. Prior to running actual samples, test the sealing technique by thermal cycling of a plate filled with water. Most clear sealing films do not provide a good seal. 11. Although express barcoding is instrumental in analyzing tissue taken from live mammals (17, 18), this chapter does not cover the tools or methods used in biopsy and live sampling of liquid tissue or the respective animal handling techniques; refer to specialized literature (e.g., refs. 34, 35) for details. 12. While there are numerous guidelines on mammal tissue preservation, many existing tissue collections and protocols focus on studies of chemical contaminants or other specialized tasks (e.g., allozyme analyses) and promote collecting tissue from internal organs, such as liver (e.g., ref. 36). Both liver and muscle have high mitochondria content (37); however, our experience corroborates other studies (38, 39) which indicate that internal organs (e.g., liver and kidney) are suboptimal sources of mitochondrial DNA. The yield of full-length mitochondrial PCR products is lower or complicated by pseudogenes (numts) Fig. 4 which impede or prevent accurate sequencing. These effects appear inconsistent between samples, presumably dependent on the time between euthanasia and tissue collection, type and quality of initial fixation, and subsequent storage conditions. Liver is characterized by the early (<1 h) onset of postmortem autolysis causing ultrastructural changes in mitochondria while nuclear heterochromatin condenses and is less affected (40, 41); similar processes appear to affect cardiac muscle (42). Chromatin structure protects DNA against oxidative and other damages (43) and may provide protection against autolysis. The preferential amplification of
8
DNA Barcoding in Mammals
175
Fig. 4. Fragment of a sequencer chromatogram trace file showing a nuclear pseudogene at the 5¢ end.
numts from some kidney, heart, and liver samples when broad-range primer cocktails are used may reflect degradation of the primary mtDNA target. Although liver, kidney, and heart remain the most commonly preserved mammal tissues, their use for high throughput amplification of mtDNA is discouraged in favor of skeletal muscle. Our data also show high success of barcode recovery from brain tissue, perhaps as a result of good protection of mtDNA against degradation (44). 13. The quality of DNA in ethanol-preserved tissues is dependent on many factors, including ethanol acidity and concentration, storage temperature, exposure to light, sample age, as well as the quality of the tissue. Ethanol is a good preservative of morphological integrity of the tissue, but it does not suppress enzymatic activity. Therefore, it is preferred that ethanolpreserved tissue is stored at low temperatures (ideally, −20°C or lower). Do not use denatured ethanol with unknown additives for tissue preservation and DNA extraction. Although 200 proof ethanol is the traditionally preferred choice for molecular protocols, reagent-grade (histological) ethanol (e.g., Fisher Scientific; Cat. No. A962-4) is also suitable for tissue fixation and all molecular protocols described in this chapter. Cryopreservation in liquid nitrogen is ideal for tissue (26), but may not be feasible in many field situations. FTA cards are convenient, but sensitive to oversampling and ambient humidity (17). When freezing or ethanol fixation is logistically impractical, alternative methods of tissue preservation for routine and express barcoding methods include (a) DMSO—a common salt solution for tissue preservation (39). (b) Laundry detergent with enzymes (e.g., Persil MegaPearls)—small tissue samples should be placed in tubes/bags filled with dry detergent and stored away from moisture. Samples should be removed from medium prior to lysis, but washing is not required. (c) Dried muscle—DNA barcodes can be successfully recovered from muscle of air-dried mammal carcasses prepared
176
N.V. Ivanova et al.
for clearing skeletons in a dermestarium and stored at room temperature. Tissues can be shipped for analysis without additional fixation, but minute samples in microplate wells should be soaked with ethanol to prevent static displacement. This protocol can be used by small museums that prepare skin, skull, and skeleton vouchers but do not have a designated tissue collection. Biopsies (e.g., ear, skin, or hair samples) can be preserved the same way as muscle tissues; do not use analgesics, such as EMLA cream, as they may cause DNA degradation. Regular lysis protocols can be used for fresh tissue and wing membrane punches (in bats) while alkaline lysis is better for hairs. 14. If using the Barcode of Life Data Systems (BOLD; http:// www.boldsystems.org) as the online workbench for barcode data management, ensure that the syntax of individual specimen/sample numbers matches the Sample ID numbers submitted to BOLD. 15. Use of flame for instrument cleaning is discouraged as it quickly degrades equipment. 16. This protocol describes the cheapest reliable solution for preserving mammal tissue. If field cryopreservation in liquid nitrogen is used (26), then ethanol fixation is not required. Ethanol-preserved tissues can be stored in the same solution indefinitely after the first change. If the fixative changes color, a follow-up replacement is recommended. Do not change from one type of fixative to another. In particular, transfer of samples from DMSO to ethanol leads to rapid DNA degradation and should be avoided. 17. Recommended storage is at –80°C; DNA preserves indefinitely under these conditions. If ultracold storage is unfeasible, samples will preserve adequately at –20°C. For ethanol, use freezers rated for storage of flammable liquids. If unavailable, ethanol can be drained after 1–2 weeks following the last fixative change. 18. An outline of standard sampling instructions for 96-well microplates can be found on the iBOL Web site: http://ibol.org/ get-involved/for-scientists/ under “Sampling Instructions”. 19. Premade data templates for plate map creation can be used, such as the CCDB electronic lab book (45) or CCDB plate record available on the iBOL Web site. 20. If the plate is ready for immediate laboratory analysis (no transport), it can be prefilled with lysis buffer and Proteinase K [step 2(h)] rather than ethanol; step 2(a–g) can thus, be omitted. 21. In high throughput facilities, plates with mammal tissue can be frozen after the lysis stage and stored at –20°C for up to several
8
DNA Barcoding in Mammals
177
weeks before extraction. Plates should be defrosted at room temperature and prewarmed for 10–15 min at 56°C to ensure that all precipitated salts are fully dissolved prior to extraction. This approach can be used with other vertebrates, but is not applicable for invertebrate samples. 22. With minor modifications, GF DNA extraction protocol can be performed using individual spin columns (Epoch Biolabs Cat. No. 1920-250). All reagent volumes will be the same as in the plate-based protocol. This method requires a benchtop centrifuge for microtubes. Use 5,000–6,000 × g for binding and wash stages and 10,000 × g for elution. Replace collection tubes with clean ones after the first wash step to prevent overflow (2 ml tubes can be used as a replacement with the caps removed). After the final wash step, place spin column into a clean collection tube and centrifuge at 10,000 × g for 4 min to dry the membrane. Prior to drying and elution, replace collection tube again with a clean decapped 2 ml tube. After elution, transfer DNA into clean tubes with caps. 23. Low-salt buffer, e.g., 10 mM Tris–HCl, pH 8.0, can be used for DNA elution. We do not recommend using even diluted EDTA in the elution buffer as it might inhibit PCR reactions. 24. Primer cocktails are routinely mixed in 1.5 ml tubes from 10 mM primer stocks. Proportions are in volume; for example, to make forward cocktail C_VF1LFt1, mix 100 ml of LepF1_t1, 100 ml of VF1_t1, 100 ml of VF1d_t1, and 300 ml of VF1i_t1. 25. It is traditionally recommended to keep PCR reagents (dNTP, primers, and Taq polymerase) on ice; however, using ice can increase the chance of contamination and is not convenient in a high throughput setting. All reagents, except Taq polymerase, can be defrosted in a clean tube rack at room temperature. After defrosting, briefly vortex all solutions (except Taq) and spin down in the mini-centrifuge. To avoid multiple freeze– thaw cycles (more than ten), store primers and dNTPs in smaller aliquots. To extend the shelf-life of Taq polymerase, it should be kept in the freezer or on a cooling block and added as a last component, just before returning all reagents back to the freezer. Platinum Taq is a very stable “hot-start” enzyme which is not active at room temperature, thus allowing PCR mix or premade plates to be kept at room temperature for at least 15–20 min during the reaction setup. 26. In high throughput facilities, operations can be standardized by premaking plate batches containing PCR and sequencing reagent mixes with 5% trehalose used as a cryoprotector. In order to prevent DNA contamination of batches, reagents for PCR plates should be dispensed only using DNA-free equipment in a UV-sterilized workspace. Plates should be covered with clear film and stored frozen at –20°C until use. Prior to
178
N.V. Ivanova et al.
premaking each large batch of plates, validation is recommended both for individual reagents and for final reagent mixes. Predispensed plates should be defrosted at room temperature and centrifuged for 1 min at 1,000 × g before use. 27. To expedite confirmation of PCR recovery, we recommend using precast agarose E-gels available in 96-well format. If kept moist in original packaging, E-gels can be reused up to three times, preferably within 24 h. Observe water content inside gel wells if intended for reuse; water reloading is usually unnecessary if rerunning the gel within 1 h after the previous load. Load the follow-up round of samples in the same positions as in the previous run; read PCR yield from the top row of bands. Use E-gel Editor software (Invitrogen) to process digital gel images. Caution: E-gels are prestained with ethidium bromide and should be handled and disposed of following appropriate precautions (e.g., refer to MSDS requirements, http://fscimage. fishersci.com/msds/45442.htm, or equivalent national safety standards). 28. Hit-picking is recommended to avoid wasting sequencing reagents (especially BigDye) on failed samples. Failure tracking is a procedure for recovering barcode sequences from DNA extracts that failed to yield PCR products or sequences of adequate quality during the first round of PCR. Routinely, Mammal Cocktail (C_VF1LFt1 + C_VR1LRt1) is used for first-pass PCR and Fish Cocktail (C_FishF1t1 + C_FishR1t1) for failure tracking. Alternative forward primers (RonM_t1 or AquaF2) can be combined with either C_VR1LRt1 or C_ FishR1t1 to recover short length sequences (approx. 400 or 200 bp, respectively) from degraded samples. Ensure that a new plate map is assembled to track the position of each sample following rearrangement. 29. We do not clean up PCR products to reduce the cost and minimize chances of contamination. The PCR master mix recipe listed above contains low concentration of dNTP and primers, thus allowing the normalization of the final concentration of the PCR product and minimization of interference of unincorporated PCR primers with cycle sequencing reaction. Sequencing of unpurified products might lead to lower sequence quality for the first 20–50 bp. However, such signal degradation is of little concern for bidirectional sequencing. 30. Severe overloading of sequencing reaction with PCR product might lead to shorter reads; therefore, minor adjustments might be required based on PCR product concentration (optimal range for products of 600–700 bp from 25 to 50 ng/reaction). The amount of required product may also vary, depending on the sequencing cleanup protocol. For example, for Sephadex cleanup described in this chapter, we do not dilute PCR products, but for other cleanup systems, such as AutoDTR 96
8
DNA Barcoding in Mammals
179
from Edge Biosystems or ethanol precipitation, PCR product dilution is recommended. 31. Bidirectional sequencing is used in reference library applications, while unidirectional sequencing is sufficient for express barcoding and some forensic applications. 32. For large-scale operations involving liquid handling robots, we recommend performing sequence cleanup with AutoDTR96 kit from Edge Biosystems. The protocol for robotic Edge cleanup can be downloaded from http://www.dnabarcoding. ca/CCDB_DOCS/CCDB_Sequencing.pdf. 33. 0.1 mM EDTA is a less toxic substitute for Hi-Di Formamide providing higher signal. Samples dissolved in EDTA should be processed on the sequencer within 36 h. If preparation of the sequencing reaction takes place in a separate facility or is intended for sequencing run at a later date, then the purified sequencing reaction can be collected into an empty plate and dried in a SpeedVac concentrator. Dry purified sequencing products can be stored in the dark at –20°C for up to 2 weeks. 34. FTA Elute cards are suitable for cheek swab, blood, and fresh tissue (muscle, brain, or gonad) blots. In the latter case, a small tissue aliquot should be blotted onto the card for safe and easy shipment followed by quick processing in the molecular lab, while the bulk tissue sample can be deposited in a cryostorage. FTA Elute cards can serve as an additional tissue backup for liquid nitrogen tanks during field collection, but are not recommended as the sole form of tissue archival storage. 35. FTA Elute cards are sensitive to excessive volume of sample; large quantities of tissue prevent proper fixation and drying and lead to DNA degradation and cross-contamination. Liquid tissue (especially blood) should not saturate the filter paper in the blotting circle; refer to Fig. 2 for an example of resulting appearance. 36. This applies to the FTA Elute card with 96 blotting circles, which has a portion for recording sample numbers in a 12 × 8-grid map. This step is optional and should be performed in addition to filling a digital plate map. 37. If the blotting card is closed before the blotting circles have dried, portions of tissue can transfer onto the cover and contaminate adjacent circles. 38. Humidity leads to extraction of preservation agents from the filter paper and their crystallization on its surface; it can also cause leakage of tissue blots between circles. 39. This extraction method is recommended only if DNA extracts are not intended for long-term storage, e.g., for forensic applications.
180
N.V. Ivanova et al.
Acknowledgments We thank Judith Eger, Mark Engstrom, Burton Lim, Don Stewart, Charles Francis, Sergey Kruskop, Andrey Lissovsky, Vladimir Lebedev, Natalia Abramson, Ivan Kuzmin, Bernard Agwanda, Anna Bannikova, Ticul Alvarez, Fernando Cervantez, Curtis Strobeck, Jack Millar, and William Pruitt, Jr. for providing materials for analysis; Robert Hanner for advice on protocol development; Agata Pawlowski and Miranda Elliott for protocol testing; and Paul Hebert for administrative support. DNA analyses were performed at the Canadian Centre of DNA Barcoding, Biodiversity Institute of Ontario, and University of Guelph, and supported by grants to Paul Hebert from the Gordon and Betty Moore Foundation, Genome Canada through the Ontario Genomics Institute, (2008-OGI-ICI-03) the Canada Foundation for Innovation, the Ontario Innovation Trust, and the Natural Sciences and Engineering Research Council of Canada. References 1. Reeder DM, Helgen KM, Wilson DE (2007) Global trends and biases in new mammal species discoveries. Occas Papers Mus Texas Technol Univ 269:1–35 2. Ceballos G, Ehrlich PR (2009) Discoveries of new mammal species and their implications for conservation and ecosystem services. Proc Natl Acad Sci 106:3841–3846 3. Baker RJ, Bradley RD (2006) Speciation in mammals and the genetic specie