Compact Riemann Surfaces: An Introduction to Contemporary Mathematics, 3rd Edition (Universitext)

This page intentionally left blank Jürgen Jost C omp act Riemann S urfaces An Introduction to Contemporary Mathemati...

Author: Jurgen Jost

43 downloads 799 Views 1MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!

Report copyright / DMCA form

DOWNLOAD PDF

This page intentionally left blank

Jürgen Jost

C omp act Riemann S urfaces An Introduction to Contemporary Mathematics Third Edition With 23 Figures

123

Jürgen Jost Max Planck Institute for Mathematics in the Sciences Inselstr. 22 04103 Leipzig Germany e-mail: [email protected]

Mathematics Subject Classiﬁcation (2000): 30F10, 30F45, 30F60, 58E20, 14H55

Library of Congress Control Number: 2006924561

ISBN-10 3-540-33065-8 Springer Berlin Heidelberg New York ISBN-13 978-3-540-33065-3 Springer Berlin Heidelberg New York This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, speciﬁcally the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microﬁlm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable for prosecution under the German Copyright Law. Springer is a part of Springer Science+Business Media springer.com © Springer-Verlag Berlin Heidelberg 2006 Printed in Germany The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a speciﬁc statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: Erich Kirchner, Heidelberg Typesetting by the author and SPI Publisher Services using a Springer LATEX macro package Printed on acid-free paper

11689881

41/sz - 5 4 3 2 1 0

Dedicated to the memory of my father

This page intentionally left blank

Preface

The present book started from a set of lecture notes for a course taught to students at an intermediate level in the German system (roughly corresponding to the beginning graduate student level in the US) in the winter term 86/87 in Bochum. The original manuscript has been thoroughly reworked several times although its essential aim has not been changed. Traditionally, many graduate courses in mathematics, and in particular those on Riemann surface theory, develop their subject in a most systematic, coherent, and elegant manner from a single point of view and perspective with great methodological purity. My aim was instead to exhibit the connections of Riemann surfaces with other areas of mathematics, in particular (twodimensional) diﬀerential geometry, algebraic topology, algebraic geometry, the calculus of variations and (linear and nonlinear) elliptic partial diﬀerential equations. I consider Riemann surfaces as an ideal meeting ground for analysis, geometry, and algebra and as ideally suited for displaying the unity of mathematics. Therefore, they are perfect for introducing intermediate students to advanced mathematics. A student who has understood the material presented in this book knows the fundamental concepts of algebraic topology (fundamental group, homology and cohomology), the most important notions and results of (two-dimensional) Riemannian geometry (metric, curvature, geodesic lines, Gauss-Bonnet theorem), the regularity theory for elliptic partial diﬀerential equations including the relevant concepts of functional analysis (Hilbert- and Banach spaces and in particular Sobolev spaces), the basic principles of the calculus of variations and many important ideas and results from algebraic geometry (divisors, Riemann-Roch theorem, projective spaces, algebraic curves, valuations, and many others). Also, she or he has seen the meaning and the power of all these concepts, methods, and ideas at the interesting and nontrivial example of Riemann surfaces. There are three fundamental theorems in Riemann surface theory, namely the uniformization theorem that is concerned with the function theoretic aspects, Teichm¨ uller’s theorem that describes the various conformal structures on a given topological surface and for that purpose needs methods from real analysis, and the Riemann-Roch theorem that is basic for the algebraic geometric theory of compact Riemann surfaces. Among those, the Riemann-Roch theorem is the oldest one as it was rigorously demonstrated and successfully

VIII

Preface

applied already by the middle of the last century. The uniformization theorem was stated by Riemann as well, but complete proofs were only found later by Poincar´e and Koebe. Riemann himself had used the so-called Dirichlet principle for the demonstration of that result which, however, did not withstand Weierstrass’ penetrating criticism and which could be validated only much later by Hilbert. In any case, it seems that the algebraic geometry of Riemann surfaces had a better start than the analysis which succeeded only in our century in developing general methods. Teichm¨ uller’s theorem ﬁnally is the youngest one among these three. Although the topological result was already known to Fricke and Klein early this century, it was Teichm¨ uller who in the thirties worked out the fundamental relation between the space that nowadays bears his name and holomorphic quadratic diﬀerentials. Teichm¨ uller himself was stimulated by earlier work of Gr¨ otzsch. Complete proofs of the results claimed by Teichm¨ uller were only provided by Ahlfors and Bers in the ﬁfties and sixties. In the present book, all three fundamental theorems are demonstrated (we treat only compact Riemann surfaces; while the Riemann-Roch and Teichm¨ uller theorems are naturally concerned with compact surfaces, for the uniformization theorem this means that we restrict to an easier version, however). For Riemann-Roch, we give an essentially classical proof. Teichm¨ uller’s theorem is usually derived with the help of quasiconformal mappings. Here, we shall present a diﬀerent approach using so-called harmonic maps instead. This method will also be used for the uniformization theorem. While quasiconformal maps are deﬁned by a pointwise condition, harmonic maps are obtained from a global variational principle. Therefore, the analytic properties of harmonic maps are better controlled than those of quasiconformal maps. For both classes of maps, one needs the regularity theory of elliptic partial diﬀerential equations, although harmonic maps are perhaps a little easier to treat because they do not require the Calderon-Zygmund theorem. What is more important, however, is that harmonic map theory is of great use in other areas of geometry and analysis. Harmonic mappings are critical points for one of the simplest nonlinear geometrically deﬁned variational problems. Such nonlinear methods have led to enormous progress and farreaching new developments in geometry. (Let us only mention Yau’s solution of the Calabi conjecture that is concerned with diﬀerential equations of Monge-Amp`ere type, with its many applications in algebraic geometry and complex analysis, the many applications that harmonic maps have found for K¨ ahler manifolds and symmetric spaces, and the breakthroughs of Donaldson in four-dimensional diﬀerential topology that were made possible by using Yang-Mills equations, and most recently, the Seiberg-Witten equations.) The present book therefore is also meant to be an introduction to nonlinear analysis in geometry, by showing the power of this approach for an important and interesting example, and by developing the necessary tools. This constitutes the main new aspect of the present book.

Preface

IX

As already indicated, and as is clear from the title anyway, we only treat compact Riemann surfaces. Although there exists an interesting and rich theory of noncompact (open) Riemann surfaces as well, for mathematics as a whole, the theory of compact Riemann surfaces is considerably more important and more central. Let us now describe the contents of the present book more systematically. The ﬁrst chapter develops some topological material, in particular fundamental groups and coverings, that will be needed in the second chapter. The second chapter is mainly concerned with those Riemann surfaces that are quotients of the Poincar´e upper half plane (or, equivalently, the unit disk) and that are thus equipped with a hyperbolic metric. We develop the foundations of two-dimensional Riemannian geometry. We shall see the meaning of curvature, and, in particular, we shall discuss the Gauss-Bonnet theorem in detail, including the Riemann-Hurwitz formula as an application. We also construct suitable fundamental polygons that carry topological information. We also treat the Schwarz lemma of Ahlfors and its applications, like the Picard theorem, thus illustrating the importance of negatively curved metrics, and discussing the concept of hyperbolic geometry in the sense of Kobayashi. Finally, we discuss conformal structures on tori; apart from its intrinsic interest, this shall serve as a preparation for the construction of Teichm¨ uller spaces in the fourth chapter. In any case, one of the main purposes of the second chapter is to develop the geometric intuition for compact Riemann surfaces. The third chapter is of a more analytic nature. We brieﬂy discuss Banachand Hilbert space and then introduce the Sobolev space of square integrable functions with square integrable weak derivatives, i.e. with ﬁnite Dirichlet integral. This is the proper framework for Dirichlet’s principle, i.e. for obtaining harmonic functions by minimizing Dirichlet’s integral. One needs to show diﬀerentiability properties of such minimizers, in order to fully justify Dirichlet’s principle. As an introduction to regularity theory for elliptic partial diﬀerential equations, we ﬁrst derive Weyl’s lemma, i.e. the smoothness of weakly harmonic functions. For later purposes, we also need to develop more general results, namely the regularity theory of Korn, Lichtenstein, and Schauder that works in the C k,α H¨older spaces. We shall then be prepared to treat harmonic maps, our central tool for Teichm¨ uller theory and the uniformization theorem in an entirely elementary manner, we ﬁrst prove the existence of energy minimizing maps between hyperbolic Riemann surfaces; the previously developed regularity theory will then be applied to show smoothness of such minimizers. Thus, we have found harmonic maps. Actually, the energy integral is the natural generalization of Dirichlet’s integral for maps into a manifold - hence also the name “harmonic maps”. We shall then show that under appropriate assumptions, harmonic maps are unique and diﬀeomorphisms. Incidentally, Hurwitz’ theorem about the ﬁniteness of

X

Preface

the number of automorphisms of a compact Riemann surface of genus p = 1 is a direct consequence of the uniqueness of harmonic maps in that case. The fourth chapter is concerned with Teichm¨ uller theory. Our starting point is the observation that a harmonic map between Riemann surfaces naturally induces some holomorphic object, a so-called holomorphic quadratic diﬀerential on the domain. We investigate how this diﬀerential changes if we vary the target while keeping the domain ﬁxed. As a consequence, we obtain Teichm¨ uller’s theorem that Teichm¨ uller space is diﬀeomorphic to the space of holomorphic quadratic diﬀerentials on a ﬁxed Riemann surface of the given genus. This bijection between marked conformal structures and holomorphic quadratic diﬀerentials is diﬀerent from the one discovered by Teichm¨ uller and formulated in terms of extremal quasiconformal maps. We also introduce Fenchel-Nielsen coordinates on Teichm¨ uller space as an alternative approach for the topological structure of Teichm¨ uller space. Finally, using similar harmonic map techniques as in the proof of Teichm¨ uller’s theorem, we also demonstrate the uniformization for compact Riemann surfaces; here, the case of surfaces of genus 0 requires a somewhat more involved construction than the remaining ones. The last chapter ﬁnally treats the algebraic geometry of Riemann surfaces, historically the oldest aspect of the subject. Some of the central results had already been derived by Abel and Jacobi even before Riemann introduced the concept of a Riemann surface. We ﬁrst introduce homology and cohomology groups of compact Riemann surfaces and building upon that, harmonic, holomorphic, and meromorphic diﬀerential forms. We then introduce divisors and derive the Riemann-Roch theorem. As an application, we compute the dimensions of the space of holomorphic quadratic diﬀerentials on a given Riemann surfaces, and consequently also the dimension of the corresponding Teichm¨ uller space that was the subject of the fourth chapter. We also obtain projective embeddings of compact Riemann surfaces. We then study the ﬁeld of meromorphic functions on a compact Riemann surface and realize such surfaces as algebraic curves. We also discuss the connection with the algebraic concept of a ﬁeld with a valuation. We then prove Abel’s famous theorem on elliptic functions and their generalizations or - in diﬀerent terminology - on linearly equivalent divisors, as well as the Jacobi inversion theorem. The ﬁnal section discusses the preceding results for the beautiful example of elliptic curves. Often, we shall use the terminology of modern algebraic geometry instead of the classical one; however, the notions of sheaf theory have not been used. The prerequisites are mostly of an elementary nature; clearly, for understanding and appreciating the contents of the present book, some previous exposure to mathematical reasoning is required. We shall need some fundamental results from real analysis, including Lebesgue integration theory

Preface

XI

and the Lp -spaces, which can be found in my textbook “Postmodern Analysis” (see the bibliography). We shall also obviously require some background from complex analysis (function theory), but deﬁnitely not going beyond what is contained in Ahlfors’ “Complex Analysis”. In particular, we assume knowledge of the following topics: holomorphic functions and their elementary properties, linear transformations (in our book called “M¨ obius transformations”), the residue theorem, the Arzel` a-Ascoli theorem. At some isolated places, we use some results about doubly periodic meromorphic functions, and in Sec. 5.10 also some properties of the Weierstrass P-function. Finally, in Sec. 5.8, for purposes of motivation only, from the last chapter of Ahlfors, we recall the construction of a Riemann surface of an algebraic function as a branched cover of the two-sphere. In Sec. 5.1, we require some basic results about analysis on manifolds, like the Stokes and Frobenius theorems. For writing the present book, I have used rather diverse sources as detailed at the end. (All sources, as well as several additional references for further study, are compiled in the bibliography.) In particular, I have attributed the more recent theorems derived in the text to their original authors in that section, instead of the main text. Historical references to the older literature are sparse since so far, I did not enjoy the leisure required to check this carefully. At the end of most sections, some exercises are given. The more demanding ones are marked by an asterisque. I thank R. R. Simha for his competent translation of my original German manuscript into English, for his several useful suggestions for improvements, and in particular for his enthusiasm and good will in spite of several mishaps. Tilmann Wurzbacher and Wolfgang Medding kindly supplied many useful and detailed corrections and suggestions for my manuscript. Several corrections were also provided by Marianna Goldcheid and Jochen Lohkamp. The book beneﬁted extremely from the thorough and penetrating criticism and the manifold suggestions that were oﬀered by J¨ urgen B¨ user. Finally, I am grateful to Isolde Gottschlich, Erol Karakas, Michael Knebel, and Harald Wenk for typing and retyping various versions of my manuscript.

This page intentionally left blank

Preface to the 2nd edition

The subject of Riemann surfaces is as lively and important as ever. In particular, Riemann surfaces are the basic geometric objects of string theory, the physical theory aiming at a uniﬁcation of all known physical forces. String theory starts with a one-dimensional object, a string, and as such a string moves in space-time, it sweeps out a surface. What is relevant about this surface is its conformal structure, and so we are naturally led to the concept of a Riemann surface. In fact, much of string theory can be developed on the basis of the results, constructions, and methods presented in this book, and I have explored this approach to string theory in my recent monograph “Bosonic strings: A mathematical treatment”, AMS and International Press, 2001. For this new edition, I have streamlined the presentation somewhat and corrected some misprints and minor inaccuracies. I thank Antje Vandenberg for help with the TEX work. Leipzig, February 2002

J¨ urgen Jost

This page intentionally left blank

Preface to the 3rd edition

Inspired by the generally quite positive response that my books ﬁnd, I continuously try to improve them. This is also reﬂected in the present new edition. Here, among other things, I have rewritten Section 3.5 on the H¨ older regularity of solutions of elliptic partial diﬀerential equations, like the harmonic maps employed as an important tool in this book. The present approach not only overcomes a problem that the previous one had (which, however, could also have been solved within that approach), but also makes the scaling behavior of the various norms involved and their relationships with elliptic regularity theory transparent. Also, I have discussed the three classes of M¨ obius transformations (conformal automorphisms) - elliptic, parabolic, and hyperbolic - in more detail, with examples inserted in several places. The discussion of the meaning of the Riemann-Roch theorem, one of the three central results of Riemann surface theory, has been ampliﬁed as well. I hope that the present edition, like its predecessors, will serve its purpose of developing a conceptual understanding together with a working knowledge of technical tools for Riemann surfaces and at the same time introducing the fundamental theories of modern pure mathematics so that students can both understand them at an important example, namely Riemann surfaces, and gain a feeling for their wider scope. Leipzig, February 2006

J¨ urgen Jost

This page intentionally left blank

Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VII 1

Topological Foundations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Manifolds and Diﬀerentiable Manifolds . . . . . . . . . . . . . . . . . . . 1 1.2 Homotopy of Maps. The Fundamental Group . . . . . . . . . . . . . 3 1.3 Coverings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.4 Global Continuation of Functions on Simply-Connected Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2

Diﬀerential Geometry of Riemann Surfaces . . . . . . . . . . . . . . . 2.1 The Concept of a Riemann Surface . . . . . . . . . . . . . . . . . . . . . . 2.2 Some Simple Properties of Riemann Surfaces . . . . . . . . . . . . . 2.3 Metrics on Riemann Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.A Triangulations of Compact Riemann Surfaces . . . . . . . . . . . . . 2.4 Discrete Groups of Hyperbolic Isometries. Fundamental Polygons. Some Basic Concepts of Surface Topology and Geometry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.A The Topological Classiﬁcation of Compact Riemann Surfaces 2.5 The Theorems of Gauss-Bonnet and Riemann-Hurwitz . . . . . 2.6 A General Schwarz Lemma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 Conformal Structures on Tori . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Harmonic Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Review: Banach and Hilbert Spaces. The Hilbert Space L2 . . 3.2 The Sobolev Space W 1,2 = H 1,2 . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 The Dirichlet Principle. Weak Solutions of the Poisson Equation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Harmonic and Subharmonic Functions . . . . . . . . . . . . . . . . . . . 3.5 The C α Regularity Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Maps Between Surfaces. The Energy Integral. Deﬁnition and Simple Properties of Harmonic Maps . . . . . . . . . . . . . . . . . 3.7 Existence of Harmonic Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 Regularity of Harmonic Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9 Uniqueness of Harmonic Maps . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10 Harmonic Diﬀeomorphisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17 17 19 20 31

39 54 57 64 72 79 79 91 99 103 110 119 125 134 138 144

XVIII Contents

3.11 4

5

Metrics and Conformal Structures . . . . . . . . . . . . . . . . . . . . . . . 152

Teichm¨ uller Spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 The Basic Deﬁnitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Harmonic Maps, Conformal Structures and Holomorphic Quadratic Diﬀerentials. Teichm¨ uller’s Theorem . . . . . . . . . . . . 4.3 Fenchel-Nielsen Coordinates. An Alternative Approach to the Topology of Teichm¨ uller Space . . . . . . . . . . . . . . . . . . . . . . . 4.4 Uniformization of Compact Riemann Surfaces . . . . . . . . . . . . . Geometric Structures on Riemann Surfaces . . . . . . . . . . . . . . . 5.1 Preliminaries: Cohomology and Homology Groups . . . . . . . . . 5.2 Harmonic and Holomorphic Diﬀerential Forms on Riemann Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 The Periods of Holomorphic and Meromorphic Diﬀerential Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Divisors. The Riemann-Roch Theorem . . . . . . . . . . . . . . . . . . . 5.5 Holomorphic 1-Forms and Metrics on Compact Riemann Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 Divisors and Line Bundles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.7 Projective Embeddings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8 Algebraic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9 Abel’s Theorem and the Jacobi Inversion Theorem . . . . . . . . 5.10 Elliptic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

161 161 163 173 183 187 187 195 203 208 220 222 233 240 253 260

Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 Index of Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273

1 Topological Foundations

1.1 Manifolds and Diﬀerentiable Manifolds Deﬁnition 1.1.1 A manifold of dimension n is a connected Hausdorﬀ space M for which every point has a neighbourhood U that is homeomorphic to an open subset V of Rn . Such a homeomorphism f :U →V is called a (coordinate) chart. An atlas is a family of charts {Uα , fα } for which the Uα constitute an open covering of M . Remarks. – The condition that M is Hausdorﬀ means that any two distinct points of M have disjoint neighbourhoods. – A point p ∈ Uα is uniquely determined by fα (p) and will often be identiﬁed with fα (p). And we may even omit the index α, and call the components of f (p) ∈ Rn the coordinates of p. – We shall be mainly interested in the case n = 2. A manifold of dimension 2 is usually called a surface. Deﬁnition 1.1.2 An atlas {Uα , fα } on a manifold is called diﬀerentiable if all chart transitions fβ ◦ fα−1 : fα (Uα ∩ Uβ ) → fβ (Uα ∩ Uβ ) are diﬀerentiable of class C ∞ (in case Uα ∩ Uβ = ∅). A chart is called compatible with a diﬀerentiable atlas if adding this chart to the atlas yields again a diﬀerentiable atlas. Taking all charts compatible with a given diﬀerentiable atlas yields a diﬀerentiable structure. A diﬀerentiable manifold of dimension d is a manifold of dimension d together with a diﬀerentiable structure. Remark.

One could impose a weaker diﬀerentiability condition than C ∞ .

Deﬁnition 1.1.3 A continuous map h : M → M between diﬀerentiable manifolds M and M with charts {Uα , fα } and {Uα , fα } is said to be diﬀerentiable if all the maps fβ ◦ h ◦ fα−1 are diﬀerentiable (of class C ∞ ) wherever they are deﬁned.

2

1 Topological Foundations

If h is a homeomorphism and if both h and h−1 are diﬀerentiable, then h is called a diﬀeomorphism. Examples.

1) The sphere S n := {(x1 , . . . , xn+1 ) ∈ Rn+1 :

n+1

x2i = 1}

i=1

is a diﬀerentiable manifold of dimension n. Charts can be given as follows: On U1 := S n \{(0, . . . , 0, 1)}, we set f1 (x1 , . . . , xn+1 ) := (f11 (x1 , . . . , xn+1 ), . . . , f1n (x1 , . . . , xn+1 )) x1 xn := , ,..., 1 − xn+1 1 − xn+1 and on U2 := S n \{(0, . . . , 0, −1)} f2 (x1 , . . . , xn+1 ) := (f21 , . . . , f2n ) x1 xn := . ,..., 1 + xn+1 1 + xn+1 2) Let w1 , w2 ∈ C\{0}, m, n ∈ Z such that

w1 w2

∈ R. We call z1 , z2 ∈ C equivalent if there exist z1 − z2 = nw1 + mw2 .

Let π be the projection which maps z ∈ C to its equivalence class. The torus T := π(C) can then be made a diﬀerentiable manifold (of dimension two) as follows: Let ∆α ⊂ C be an open set of which no two points are equivalent. Then we set Uα := π(∆α ) and fα := (π | ∆α )−1 . 3) Note that the manifolds of both foregoing examples are compact. Naturally, there exist non-compact manifolds. The simplest example is Rn . Generally, every open subset of a (diﬀerentiable) manifold is again a (diﬀerentiable) manifold.

Exercises for § 1.1 1) Show that the dimension of a diﬀerentiable manifold is uniquely determined. (This requires to prove that if M1 and M2 are diﬀerentiable manifolds, and f : M1 → M2 is a diﬀeomorphism, meaning that f is invertible and both f and f −1 are diﬀerentiable, then dimension M1 = dimension M2 ).

1.2 Homotopy of Maps. The Fundamental Group

3

2) Generalize the construction of example 2 following Deﬁnition 1.1.3 to deﬁne an n-dimensional real torus through an appropriate equivalence relation on Rn . Try also to deﬁne a complex n-dimensional torus via an equivalence relation on Cn (of course, this torus then will have 2n (real) dimensions). Examples of such complex tori will be encountered in § 5.3 as Jacobian varieties.

1.2 Homotopy of Maps. The Fundamental Group For the considerations of this section, no diﬀerentiability is needed, so that the manifolds and maps which occur need not to be diﬀerentiable. Deﬁnition 1.2.1 Two continuous maps f1 , f2 : S → M between manifolds S and M are homotopic, if there exists a continuous map F : S × [0, 1] → M with F |S×{0} = f1 , F |S×{1} = f2 . We write: f1 ≈ f2 . In what follows, we need to consider curves in M (or paths - we use the two words interchangeably); these are continuous maps g : [0, 1] → M . We deﬁne the notion of homotopy of curves with the same end-points: Deﬁnition 1.2.2 Let gi : [0, 1] → M, i = 1, 2, be curves with g1 (0) = g2 (0) = p0 , g1 (1) = g2 (1) = p1 . We say that g1 and g2 are homotopic, if there exists a continuous map G : [0, 1] × [0, 1] → M such that G|{0}×[0,1] = p0 , G|[0,1]×{0} = g1 ,

G|{1}×[0,1] = p1 , G|[0,1]×{1} = g2 .

We again write: g1 ≈ g2 . Thus the homotopy must keep the endpoints ﬁxed. For example, any two curves g1 , g2 : [0, 1] → Rn with the same end-points are homotopic, namely via the homotopy

4

1 Topological Foundations

G(t, s) := (1 − s) g1 (t) + s g2 (t). Furthermore, two paths which are reparametrisations of each other are homotopic: if τ : [0, 1] → [0, 1] is continuous and strictly increasing g2 (t) = g1 (τ (t)), we can set G(t, s) := g1 (1 − s)t + s τ (t) . The homotopy class of a map f (or a curve g) is the equivalence class consisting of all maps homotopic to f (or all paths with the same end-points, homotopic to g); we denote it by {f } (resp. {g}). In particular, as we have just seen, the homotopy class of g does not change under reparametrisation. Deﬁnition 1.2.3 Let g1 , g2 : [0, 1] → M be curves with g1 (1) = g2 (0) (i.e. the terminal point of g1 is the initial point of g2 ). Then the product g2 g1 := g is deﬁned by for t ∈ [0, 12 ] g1 (2t) g(t) := g2 (2t − 1) for t ∈ [ 12 , 1]. It follows from the deﬁnition that g1 ≈ g1 , g2 ≈ g2 implies g2 g1 ≈ g2 g1 . Thus the homotopy class of g1 g2 depends only on the homotopy classes of g1 and g2 ; we can therefore deﬁne a multiplication of homotopy classes as well, namely by {g1 } · {g2 } = {g1 g2 }. Deﬁnition 1.2.4 For any p0 ∈ M , the fundamental group π1 (M, p0 ) is the group of homotopy classes of paths g : [0, 1] → M with g(0) = g(1) = p0 , i.e. closed paths with p0 as initial and terminal point. To justify this deﬁnition, we must show that, for closed paths with the same initial and terminal point, the multiplication of homotopy classes does in fact deﬁne a group: Theorem 1.2.1 π1 (M, p0 ) is a group with respect to the operation of multiplication of homotopy classes. The identity element is the class of the constant path g0 ≡ p0 . Proof. Since all the paths have the same initial and terminal point, the product of two homotopy classes is always deﬁned. It is clear that the class of the constant path g0 acts as the identity element, and that the product is associative. The inverse of a path g is given by the same path described in the opposite direction:

1.2 Homotopy of Maps. The Fundamental Group

g −1 (t) := g(1 − t),

5

t ∈ [0, 1].

We then have {g −1 } · {g} = 1 (the identity element). A homotopy of g0 with g −1 · g is given e.g. by g(2st), g(t, s) := g −1 (1 + 2s(t − 1)) = g(2s(1 − t)),

t ∈ [0, 12 ] t ∈ [ 12 , 1].

Remark. In the sequal, we shall often write g in place of {g}, hoping that this will not confuse the reader. Lemma 1.2.1 For any p0 , p1 ∈ M , the groups π1 (M, p0 ) and π1 (M, p1 ) are isomorphic. Proof. We pick a curve γ with γ(0) = p0 , γ(1) = p1 . The map sending a path g with g(0) = g(1) = p1 to the path γ −1 gγ induces a map π1 (M, p1 ) → π1 (M, p0 ). This map is an isomorphism of groups.

Deﬁnition 1.2.5 The abstract group π1 (M ) deﬁned in view of Lemma 1.2.1 is called the fundamental group of M . Remark. It is important to observe that the isomorphism between π1 (M, p0 ) and π1 (M, p1 ) constructed in Lemma 1.2.1 is not canonical, since it depends on the choice of the path γ. A diﬀerent path not homotopic to γ could give rise to a diﬀerent isomorphism. In particular, consider the case p0 = p1 , so that γ ∈ π1 (M, p0 ). Then conjugation by γ g → γ −1 gγ is in general a non-trivial automorphism of π1 (M, p0 ). Deﬁnition 1.2.6 We say that M is simply-connected if π1 (M ) = {1}. Lemma 1.2.2 If M is simply-connected, then any two paths g1 , g2 in M with g1 (0) = g2 (0) and g1 (1) = g2 (1) are homotopic. This follows easily from the deﬁnitions.

Example 1 Rn is simply-connected, so is S n for n ≥ 2 (Exercise). Deﬁnition 1.2.7 A path g : [0, 1] → M with g(0) = g(1) = p0 which is homotopic to the constant path g0 (t) ≡ p0 is called null-homotopic.

6

1 Topological Foundations

Remark. This is generally accepted terminology although it might be more appropriate to call such a path one-homotopic as the neutral element of our group is denoted by 1. Finally, we have: Lemma 1.2.3 Let f : M → N be a continuous map, and q0 := f (p0 ). Then f induces a homomorphism f∗ : π1 (M, p0 ) → π1 (N, q0 ) of fundamental groups. Proof. If g1 ≈ g2 , then we also have f (g1 ) ≈ f (g2 ), since f is continuous. Thus we obtain a well-deﬁned map between fundamental groups. Clearly, f (g2−1 · g1 ) ≈ (f (g2 ))−1 · f (g1 ).

Exercises for § 1.2 – Show that Rn is simply connected, and so is S n for n ≥ 2. – Determine the fundamental group of S 1 . Outline of the solution: Let S 1 = {z ∈ C : |z| = 1} = eiθ ∈ C; with θ ∈ R, 0 ≤ θ ≤ 2π . Then paths γn in π1 (S 1 , 1) are given by t → e2π i n t

( t ∈ [0, 1])

for each n ∈ Z. Show that γn and γm are not homotopic for n = m and that on the other hand each γ ∈ π1 (S 1 , 1) is homotopic to some γn . – Having solved 2), determine the fundamental group of a torus (as deﬁned in example 2) after Def. 1.1.3). After having read § 1.3, you will know an argument that gives the result immediately.

1.3 Coverings Deﬁnition 1.3.1 Let M and M be manifolds. A map π : M → M is said to be a local homeomorphism if each x ∈ M has a neighbourhood U such that π(U ) is open in M and π | U is a homeomorphism (onto π(U )). If M is a diﬀerentiable manifold with charts {Uα , fα }, and π : M → M a local homeomorphism, then we can introduce charts {Vβ , gβ } on M by requiring that π | Vβ be a homeomorphism and that all fα ◦ π ◦ gβ−1 be diﬀeomorphisms whenever they are deﬁned. In this way, M too becomes a diﬀerentiable manifold: the diﬀerentiable structure of M can be pulled back to M . π then becomes a local diﬀeomorphism.

1.3 Coverings

7

Deﬁnition 1.3.2 A local homeomorphism π : M → M is called a covering if each x ∈ M has a (connected) neighbourhood V such that every connected component of π −1 (V ) is mapped by π homeomorphically onto V . (If π is clear from the context, we sometimes also call M a covering of M .) Remarks. 1) In the literature on Complex Analysis, often a local homeomorphism is already referred to as a covering. A covering in the sense of Deﬁnition 1.3.2 is then called a perfect, or unlimited, covering. 2) The preceding deﬁnitions are still meaningful if M and M are just topological spaces instead of manifolds. Lemma 1.3.1 If π : M → M is a covering, then each point of M is covered the same number of times, i.e. π −1 (x) has the same number of elements for each x ∈ M . Proof. Let n ∈ N. Then one easily sees that the set of points in M with precisely n inverse images is both open and closed in M . Since M is connected, this set is either empty or all of M . Thus either there is an n ∈ N for which this set is all of M , or every point of M has inﬁnitely many inverse images.

Theorem 1.3.1 Let π : M → M be a covering, S a simply-connected manifold, and f : S → M a continuous map. Then there exists a continuous f : S → M with π ◦ f = f. Deﬁnition 1.3.3 An f as in the above theorem is called a lift of f . Remark.

Lifts are typically not unique.

We also say in this case that the diagram M f

↓ π

−→

S f M is commutative. For the proof of Theorem 1.3.1, we shall ﬁrst prove two lemmas. Lemma 1.3.2 Let π : M → M be a covering, p0 ∈ M, p0 ∈ π −1 (p0 ), and g : [0, 1] → M a curve with g(0) = p0 . Then g can be lifted (as in Def. 1.3.3) to a curve g : [0, 1] → M with g (0) = p0 , so that π ◦ g = g. Further, g is uniquely determined by the choice of its initial point p0 .

8

1 Topological Foundations

Proof. Let T := {t ∈ [0, 1] : g|[0, t] can be lifted to a unique curve g |[0, t] with g (0) = p0 }. We have 0 ∈ T , hence T = ∅. If t ∈ T , we choose a neighbourhood V of g(t) as in Deﬁnition 1.3.2, so that π maps each component of π −1 (V ) homeomorphically onto V . Let V denote the component of π −1 (V ) containing g (t). We can choose τ > 0 so small that g([t, t + τ ]) ⊂ V . It is then clear that g can be uniquely extended as a lift of g to [t, t + τ ], since π : V → V is a homeomorphism. This proves that T is open in [0,1]. Suppose now that (tn ) ⊂ T , and tn → t0 ∈ [0, 1]. We choose a neighbourhood V of g(t0 ) as before. Then there exists n0 ∈ N with g([tn0 , t0 ]) ⊂ V . We let V be the component of π −1 (V ) containing g (tn0 ). We can extend g to [tn0 , t0 ].

Hence t0 ∈ T , so that T is also closed. Thus T = [0, 1]. Lemma 1.3.3 Let π : M → M be a covering, and Γ : [0, 1] × [0, 1] → M a homotopy between the paths γ0 := Γ (· , 0) and γ1 := Γ (· , 1) with ﬁxed end points p0 = γ0 (0) = γ1 (0) and p1 = γ0 (1) = γ1 (1). Let p0 ∈ π −1 (p0 ). Then Γ can be lifted to a homotopy Γ : [0, 1] × [0, 1] → M with initial point p0 (i.e. Γ (0, s) = p0 for all s ∈ [0, 1]); thus π ◦ Γ = Γ . In particular, the lifted paths γ0 and γ1 with initial point p0 have the same terminal point p1 ∈ π −1 (p1 ), and are homotopic. Proof. Each path Γ (· , s) can be lifted to a path γs with initial point p0 by Lemma 1.3.2. We set Γ (t, s) := γs (t), and we must show that Γ is continuous. Let Σ := {(t, s) ∈ [0, 1] × [0, 1] : Γ is continuous at (t, s)}. We ﬁrst take a neighbourhood U of p0 such that π : U → U is a homeomorphism onto a neighbourhood U of p0 ; let ϕ : U → U be its inverse. Since Γ ({0} × [0, 1]) = p0 and Γ is continuous, there exists an ε > 0 such that Γ ([0, ε] × [0, 1]) ⊂ U . By the uniqueness assertion of Lemma 1.3.2, we have γs | [0, ε] = ϕ ◦ γs | [0, ε] for all s ∈ [0, 1]. Hence Γ = ϕ ◦ Γ on [0, ε] × [0, 1]. In particular, (0, 0) ∈ Σ. Now let (t0 , s0 ) ∈ Σ. We choose a neighbourhood U of Γ (t0 , s0 ) for which π : U → U is a homeomorphism onto a neighbourhood U of Γ (t0 , s0 ); we denote its inverse again by ϕ : U → U . Since Γ is continuous at (s0 , t0 ), we have Γ (t, s) ∈ U for |t−t0 | < ε, |s−s0 | < ε if ε > 0 is small enough. By the uniqueness of lifting we again have

1.3 Coverings

9

γs (t) = ϕ ◦ γs (t) for |t − t0 |, |s − s0 | < ε, so that

Γ = ϕ ◦ Γ on {|t − t0 | < ε} × {|s − s0 | < ε}.

In particular, Γ is continuous in a neighbourhood of (t0 , s0 ). Thus Σ is open. The proof that Σ is closed is similar. It follows that Σ = [0, 1] × [0, 1], i.e. Γ is continuous. Since Γ ({1} × [0, 1]) = p1 and π ◦ Γ = Γ , we must have Γ ({1} × [0, 1]) ⊂ π −1 (p1 ). But π −1 (p1 ) is discrete since π is a covering and Γ ({1} × [0, 1]) is connected, hence the latter must reduce to a single point.

Thus, all the curves γs have the same end point. Proof of Theorem 1.3.1 We pick a y0 ∈ S, put p0 := f (y0 ), and choose a p0 ∈ π −1 (p0 ). For any y ∈ S, we can ﬁnd a path γ : [0, 1] → S with γ(0) = y0 , γ(1) = y. By Lemma 1.3.2, the path g := f ◦ γ can be lifted to a path g starting at p0 . We set f (y) := g (1). Since S is simply-connected, any two paths γ1 and γ2 in S with γ1 (0) = γ2 (0) = y0 and γ1 (1) = γ2 (1) = y are homotopic. Hence f (γ1 ) and f (γ2 ) are also homotopic, since f is continuous. Thus, it follows from Lemma 1.3.3 that the point f (y) obtained above is independent of the choice of the path γ joining y0 to y1 . The continuity of f can be proved exactly as in the proof of Lemma 1.3.3.

Corollary 1.3.1 Let π : M → M be a covering, g : [0, 1] → M a curve with g(0) = g(1) = p0 , and g : [0, 1] → M a lift of g. Suppose g is homotopic to the constant curve γ(t) ≡ p0 . Then g is closed and homotopic to the constant curve. Proof.

This follows directly from Lemma 1.3.2.

Deﬁnition 1.3.4 Let π1 : M1 → M and π2 : M2 → M be two coverings. We say that (π2 , M2 ) dominates (π1 , M1 ) if there exists a covering π21 : M2 → M1 such that π2 = π1 ◦ π21 . The two coverings are said to be equivalent if there exists a homeomorphism π21 : M2 → M1 such that π2 = π1 ◦ π21 . Let π : M → M be a covering, p0 ∈ M, p0 ∈ π −1 (p0 ), g : [0, 1] → M a path with g(0) = g(1) = p0 , and g : [0, 1] → M the lift of g with g (0) = p0 . By Corollary 1.3.1, if g is null-homotopic, then g is closed and null-homotopic. Lemma 1.3.4 Gπ := {{g} : g is closed} is a subgroup of π1 (M, p0 ). Proof.

If {g1 }, {g2 } lie in Gπ , so do {g1−1 } and {g1 g2 }.

The Gπ deﬁned above depends on the choice of p0 ∈ π −1 (p0 ), hence we denote it by Gπ (p0 ) when we want to be precise. If p0 is another point of π −1 (p0 ), and γ is a path from p0 to p0 , then γ := π(γ ) is a closed path at p0 .

10

1 Topological Foundations

If g is a closed path at p0 , then the lift of g starting at p0 is closed precisely when the lift of γgγ −1 starting at p0 is closed. Hence Gπ (p0 ) = {γ} · Gπ (p0 ) · {γ −1 }. Thus Gπ (p0 ) and Gπ (p0 ) are conjugate subgroups of π1 (M, p0 ). Conversely, every subgroup conjugate to Gπ (p0 ) can be obtained in this way. It is also easy to see that equivalent coverings lead to the same conjugacy class of subgroups of π1 (M, p0 ). Theorem 1.3.2 π1 (M ) is isomorphic to Gπ , and we obtain in this way a bijective correspondence between conjugacy classes of subgroups of π1 (M ) and equivalence classes of coverings π : M → M . Proof. Let γ ∈ π1 (M , p0 ), and γ := π(γ ). Since γ is closed, we have γ ∈ Gπ ; also, being a continuous map, π maps homotopic curves to homotopic curves, so that we obtain a map π∗ : π1 (M , p0 ) → Gπ (p0 ). This map is a group homomorphism by Lemma 1.2.3, surjective by the deﬁnition of Gπ , and injective since, by Corollary 1.3.1, γ is null-homotopic if γ is. Thus π∗ is an isomorphism. As already noted, the conjugacy class of Gπ depends only on the equivalence class of π : M → M . Conversely, given a subgroup G of π1 (M, p0 ), we now want to construct a corresponding covering π : M → M . As a set, M will be the set of all equivalence classes [γ] of paths γ in M with γ(0) = p0 , two paths γ1 and γ2 being regarded as equivalent if γ1 (1) = γ2 (1) and {γ1 γ2−1 } ∈ G. The map π : M → M is deﬁned by π([γ]) = γ(1). We wish to make M a manifold in such a way that π : M → M is a covering. Let {Uα , fα } be the charts for M . By covering the Uα by smaller open sets if necessary, we may assume that all the Uα are homeomorphic to the ball {x ∈ Rn : x < 1}. Let q0 ∈ Uα , and q0 = [γ0 ] ∈ π −1 (q0 ). For any q ∈ Uα , we can ﬁnd a path g : [0, 1] → Uα with g(0) = q0 , g(1) = q. Then [gγ0 ] depends on q0 and q, but not on g. Let Uα (q0 ) be the subset of M consisting of all such [gγ]. Then π : Uα (q0 ) → Uα is bijective, and we declare {Uα (q0 ), fα ◦ π} as the charts for M . Let us show that, if p1 = p2 , π(p1 ) = π(p2 ), and p1 ∈ Uα (q1 ), p2 ∈ Uβ (q2 ), Uα (q1 ) ∩ Uβ (q2 ) = ∅.

(1.3.1)

Thus, let p1 = [g γ], p2 = [g γ2 ], where γ1 (0) = γ2 (0) = p0 , γ1 (1) = q1 , and γ2 (1) = q2 . Then γ2−1 g −1 g γ1 is closed, and does not lie in Gπ . If now q is any point of Uα (q1 ) ∩ Uβ (q2 ), then q has two representations [h γ1 ] and [h γ2 ], with γ2−1 g −1 g γ1 ∈ Gπ . However, the Uα are simply connected, hence

1.3 Coverings

11

h−1 h ≈ g −1 g , so we get γ2−1 g −1 g γ1 ∈ Gπ , a contradiction. This proves (1.3.1). If now r1 = r2 ∈ M with π(r1 ) = π(r2 ), it is obvious that r1 and r2 have disjoint neighbourhoods. If on the other hand π(r1 ) = π(r2 ), this follows from (1.3.1), so that M is a Hausdorﬀ space. It also follows from (1.3.1) that two distinct sets Uα (q1 ), Uα (q2 ) are disjoint. Hence the Uα (q ) are the connected components of π −1 (Uα ) and π maps each of them homeomorphically onto Uα . It follows that π : M → M is a covering. It remains only to show the covering π : M → M we have constructed has Gπ = G. Let then p0 = [1], and γ : [0, 1] → M a closed path at p0 . Then the lift γ of γ starting at p0 is given by γ (t) = [γ | [0, t]]. Hence γ is closed precisely when γ ∈ G.

Corollary 1.3.2 If M is simply connected, then every covering M → M is a homeomorphism. Proof. Since π1 (M ) = {1}, the only subgroup is {1} itself. This subgroup corresponds to the identity covering id : M → M . From Theorem 1.3.2 we

conclude that M then is homeomorphic to M . → M the corresponding covering, Corollary 1.3.3 If G = {1}, and π : M then π1 (M ) = {1}, and a path γ

in M is closed precisely when π(

γ ) is closed and null-homotopic. = M. If π1 (M ) = {1}, then M of M with π1 (M ) = {1} - which exists Deﬁnition 1.3.5 The covering M by Corollary 1.3.2 - is called the universal covering of M . → M, π : Theorem 1.3.3 Let f : M → N be a continuous map, and π : M

, i.e. a N → N the universal coverings. Then there exists a lift f : M → N continuous map such that the diagram ˜

f

−→ N M π ↓ ↓ π f

M −→ N is commutative (so that f ◦ π = π ◦ f ). Proof.

This follows from Theorem 1.3.1, applied to f ◦ π.

Deﬁnition 1.3.6 Let π : M → M be a local homeomorphism. Then a homeomorphism ϕ : M → M is called a covering transformation if π◦ϕ = π. The covering transformations form a group Hπ . Lemma 1.3.5 If ϕ = Id is a covering transformation, then ϕ has no ﬁxed point.

12

1 Topological Foundations

Proof. Let Σ := {p ∈ M : ϕ(p) = p} be the set of ﬁxed points of ϕ. Let p ∈ Σ, and U a neighbourhood of p such that π : U → U := π(U ) is a homeomorphism. Let V ⊂ U be a neighbourhood of p with ϕ(V ) ⊂ U . For q ∈ V , we have π(ϕ(q)) = π(q) ∈ U , hence ϕ(q) = q, since both q and ϕ(q) lie in U . Thus Σ is open. Since Σ is obviously closed, we must have Σ = ∅

or Σ = M . In the latter case, ϕ = Id. It follows in particular from Lemma 1.3.5 that two covering transformations ϕ1 and ϕ2 with ϕ1 (p) = ϕ2 (p) for one p ∈ M must be identical. We recall from group theory: Deﬁnition 1.3.7 Let G ⊂ H be groups. Then N (G) = {g ∈ H : g −1 Gg = G} is called the normaliser of G in H. G is called a normal subgroup of H if N (G) = H. Theorem 1.3.4 For any covering π : M → M , the group of covering → M is the transformations Hπ is isomorphic to N (Gπ )/Gπ . Thus, if π : M universal covering of M , then Hπ ≈ π1 (M )

(“≈” means isomorphic as groups).

Proof. We choose a base point p0 ∈ M and a p0 ∈ π −1 (p0 ). Let γ ∈ N (Gπ (p0 )). For any p ∈ M , let g : [0, 1] → M be a path joining p0 to p . We put with g := π(g ) ϕγ (p ) = (gγ) (1). If g1 is another path in M from p0 to p , then g1−1 g ∈ Gπ , hence γ −1 g1−1 gγ ∈ Gπ , since γ ∈ N (Gπ ). Thus (g1 γ) (1) = (gγ) (1), i.e. the deﬁnition of ϕγ (p ) does not depend on the choice of g . We have π(ϕγ (p )) = π((gγ) (1)) = π(g (1)) = π(p ), so that ϕγ is a covering transformation. Also, ϕγ2 γ1 (p0 ) = (γ2 γ1 ) (1) = ϕγ2 ◦ ϕγ1 (p0 ), hence ϕγ2 γ1 = ϕγ2 ◦ ϕγ1 by Lemma (1.3.5), and ϕγ = Id ⇐⇒ ϕγ (p0 ) = p0 (by Lemma (1.3.5)) ⇐⇒ γ (1) = p0 ⇐⇒ γ ∈ Gπ . Thus, we have deﬁned a homomorphism of N (Gπ ) into Hπ with kernel Gπ . Now let ϕ ∈ Hπ , and let γ : [0, 1] → M be a path from p0 to ϕ(p0 ). We set γ := π(γ ). Then {γ} ∈ N (Gπ ), and ϕγ (p0 ) = ϕ(p0 ). Hence ϕγ = ϕ by Lemma 1.3.5. Hence our homomorphism is also surjective, and our assertion follows.

1.3 Coverings

13

Corollary 1.3.4 Let G be a normal subgroup of π1 (M, p0 ) and π : M → M the covering corresponding to G according to Theorem 1.3.2. Let p0 ∈ π −1 (p0 ). Then, for every p0 ∈ π −1 (p0 ), there exists precisely one covering transformation ϕ with ϕ(p0 ) = p0 . This ϕ corresponds (under the isomorphism of Theorem 1.3.4) to π(γ ) ∈ π1 (M, p0 ), where γ is any path from p0 to p0 . Remark. Hπ operates properly discontinuously in the sense of Def. 2.4.1 below, and M = M /Hπ in the sense of Def. 2.4.2. Example 2 We consider the torus T of Example 2) in § 1.1. By construction π:C→T is a covering. We have π1 (C) = {1} as C ( = R2 as a manifold) is simply connected, see the Example after Lemma 1.2.2. Therefore π:C→T is the universal covering of T . The corresponding covering transformations are given by z → z + nw1 + mw2 for n, m ∈ Z. Thus, the group Hπ of covering transformations is Z2 . From Theorem 1.3.4, we therefore conclude π1 (T ) = Z2 . Since Z2 is an abelian group, conjugate subgroups are identical and therefore the equivalence classes of coverings of T are in bijective correspondance with the subgroups of Z2 , by Theorem 1.3.2. Let us consider the subgroup Gp,q := {(pn, qm) : n, m ∈ Z} for given p, q ∈ Z\{0}. This group corresponds to the covering πp,q : Tp,q → T where Tp,q is the torus generated by pw1 and qw2 (in the same way as our original torus T is generated by w1 , w2 ). By Theorem 1.3.4, the group of covering transformations is Z2 /Gp,q = Zp × Zq . (α, β) ∈ Zp × Zq operates on Tp,q via z → z + αw1 + βw2

14

1 Topological Foundations

(here, we consider α as an element of {0, 1, . . . , p − 1}, β as an element of {0, 1, . . . , q − 1} and the addition is the one induced from C.) Let us consider the subgroup G := {(n, 0) : n ∈ Z}

of Z2 .

The corresponding covering this time is a cylinder C constructed as follows: We call z1 , z2 ∈ C equivalent if there exists n ∈ Z with z1 − z2 = nw1 . Let π be the projection which maps z ∈ C to its equivalence class. C := π (C) then becomes a diﬀerentiable manifold as in the construction of T . The group of covering transformations is Z2 /G = Z, again by Theorem 1.3.4. m ∈ Z here operates on C by z → z + mw2 , with the addition induced from C. More generally, consider the subgroup Gp := {(pn, 0) : n ∈ Z}

for p ∈ Z\{0}.

The corresponding covering now is the cylinder Cp generated by pw1 , and the group of covering transformations is Z2 /Gp = Zp × Z. For α ∈ Zp , q ∈ Z, the operations on Cp is z → z + αw1 + qw2 as above, with α considered as an element of {0, 1, . . . , p − 1}.

Exercises for § 1.3 1) Determine all equivalence classes of coverings of a torus and their covering transformations. 2) Construct a manifold M with a (nontrivial) covering map π : S 3 → M . Hint: The group SO(4) operates on S 3 considered as the unit sphere in R4 . Find a discrete subgroup Γ of SO(4) for which no γ ∈ Γ \{identity} has a ﬁxed point on S 3 . 3) Let ab ab 10 Γ := , a, b, c, d ∈ Z, ≡ mod 3, ad − bc = 1 cd cd 01 operate on

1.4 Global Continuation of Functions on Simply-Connected Manifolds

15

H := {z = x + iy ∈ C, y > 0} via

az + b . cz + d 10 Show that if γ ∈ Γ is diﬀerent from , then γ has no ﬁxed points 01 in H. Interpret Γ as the group of covering transformations associated with a manifold H/Γ and a covering π : H → H/Γ . Construct diﬀerent coverings of H/Γ associated with conjugacy classes of subgroups of Γ . z →

1.4 Global Continuation of Functions on Simply-Connected Manifolds Later on, in §2.2, we shall need the following lemma. The reader might wish to read §2.2 before the present one, in order to understand the motivation for this lemma. Lemma 1.4.1 Let M be a simply connected manifold, and {Uα } an open covering of M , assume that all the Uα are connected. Suppose given on each Uα a family Fα of functions (not satisfying Fα = ∅ for all α) with the following properties: i) if fα ∈ Fα , fβ ∈ Fβ and Vαβ is a component of Uα ∩ Uβ , then fα ≡ fβ in a neighbourhood of some p ∈ Vαβ implies fα ≡ fβ on Vαβ ; ii) if fα ∈ Fα and Vαβ is a component of Uα ∩Uβ , then there exists a function fβ ∈ Fβ with fα ≡ fβ on Vαβ . Then there exists a function f on M such that f|Uα ∈ Fα for all α. Indeed, given fα0 ∈ Fα0 , there exists a unique such f with f|Uα0 = f . Proof. We consider the set of all pairs (p, f ) with p ∈ Uα , f ∈ Fα (α arbitrary). We set (p, f ) ∼ (q, g) ⇐⇒ p = q and f = g in some neighbourhood of p. Let [p, f ] be the equivalence class of (p, f ), and M ∗ the set of such equivalence classes; deﬁne π : M ∗ → M by π([p, f ]) = p. For fα ∈ Fα , let U (α, fα ) := {[p, fα ] : p ∈ Uα }. Then π : U (α, fα ) → Uα is bijective. By (i), π(U (α, fα ) ∩ U (β, fβ )) is a union of connected components

16

1 Topological Foundations

of Uα ∩ Uβ , hence open in M . Thus the U (α, fα ) deﬁne a topology on M ∗ . (Ω ⊂ U (α, fα ) is by deﬁnition open, if π(Ω) ⊂ Uα is open. An arbitrary Ω ∈ M ∗ is open if Ω∩U (α, fα ) is open for each α.) This topology is Hausdorﬀ by (i). Now let M be a connected component of M ∗ . We assert that π : M → M is a covering. To see this, let p∗ = (p, f ) ∈ π −1 (Uα ), i.e. π(p∗ ) = p ∈ Uα . By deﬁnition of M ∗ , there is a β such that p ∈ Uβ and f ∈ Fβ . Thus p ∈ Uα ∩Uβ . By (ii), there exists g ∈ Fα with f (p) = g(p). Thus p∗ ∈ U (α, g). Conversely, each U (α, g) is contained in π −1 (Uα ). Hence

π −1 (Uα ) = U (α, fα ). fα ∈Fα

The U (α, fα ) are open, and connected because they are homeomorphic to the Uα under π. By (i), for distinct fα1 , fα2 ∈ Fα , we have U (α, fα1 )∩U (α, fα2 ) = ∅. Hence the U (α, fα ) are the connected components of π −1 (Uα ), and those of them which are contained in M are the components of M ∩ π −1 (Uα ). It follows that π : M → M is a covering. But M is simply connected by assumption, hence π : M → M is a homeomorphism by Corollary 1.3.2.. Hence each π −1 (Uα ) is a single U (α, fα ), fα ∈ Fα . If Uα ∩ Uβ = ∅, we must have fα = fβ on Uα ∩ Uβ , so that there is a welldeﬁned function f on M with f|Uα = fα ∈ Fα for all α, using (ii). If fα0 ∈ Fα0 is prescribed, we choose M as the connected component of M ∗ containing U (α0 , f0 ), so that the f obtained above satisﬁes

f|Uα0 = fα0 . Remark. Constructions of the above kind (the space M ∗ with its topology) arise frequently in complex analysis under the name “Sheaf Theory”. For our purposes, the above lemma is suﬃcient, so there is no need to introduce these general concepts here.

2 Diﬀerential Geometry of Riemann Surfaces

2.1 The Concept of a Riemann Surface Deﬁnition 2.1.1 A two-dimensional manifold is called a surface. Deﬁnition 2.1.2 An atlas on a surface S with charts zα : Uα → C is called conformal if the transition maps zβ ◦ zα−1 : zα (Uα ∩ Uβ ) −→ zβ (Uα ∩ Uβ ) are holomorphic. A chart is compatible with a given conformal atlas if adding it to the atlas again yields a conformal atlas. A conformal structure is obtained by adding all compatible charts to a conformal atlas. A Riemann surface is a surface together with a conformal structure. Deﬁnition 2.1.3 A continuous map h : S1 → S2 between Riemann surfaces is said to be holomorphic1 if, in local coordinates {Uα , zα } on S1 and {Uβ , zβ } on S2 , all the maps zβ ◦ h ◦ zα−1 are holomorphic wherever they are deﬁned. A holomorphic map h with nowhere vanishing derivative ∂h ∂z is called conformal. We shall usually identify Uα ⊂ S with zα (Uα ). The subscript is usually unnecessary, and we shall then identify p ∈ U with z(p) ∈ C. This will not cause any diﬃculties, since we only study local objects and concepts which are invariant under conformal maps. For example, this holds for holomorphic functions and maps, for meromorphic functions, for harmonic and subharmonic2 functions, and for diﬀerentiable or rectiﬁable curves. (The conformal invariance of (sub)harmonicity follows from the formula ∂2 ∂ ∂ ∂2 (f ◦ h) = f (h(z)) h h ∂z∂z ∂w∂w ∂z ∂z for smooth f and holomorphic h.). In particular, all the local theorems of function theory carry over to holomorphic functions on Riemann surfaces (Riemann’s theorem on removable singularities of holomorphic functions, the local form of a holomorphic function, local power-series expansions etc.). 1 2

We shall also use the word “analytic” with the same signiﬁcance. A function f on a Riemann surface is called (sub) harmonic if in a local conformal ∂2 coordinate z, ∂z∂z f = (≥)0.

18

2 Diﬀerential Geometry of Riemann Surfaces

Examples. 1) Here is a trivial example: C and open subsets of C are Riemann surfaces. (More generally, any open nonempty subset of a Riemann surface is itself a Riemann surface.) 2) Here is the most important example of a compact Riemann surface: The Riemann sphere. S 2 ⊂ R3 . We choose U1 and U2 as in the discussion of the sphere in Sec 1.1, and set z1 =

x1 + ix2 on U1 , 1 − x3

z2 =

x1 − ix2 on U2 . 1 + x3

We then have z2 = z11 on U1 ∩ U2 , so that the transition map is indeed holomorphic. It is also instructive and useful for the sequel to consider this example in the following manner: If we consider z1 on all of S 2 , and not only on S 2 \{(0, 0, 1)}, then z1 maps S 2 onto C ∪ {∞}, the extended complex plane (this map z1 then is called stereographic projection), in a bijective manner. While z1 (U1 ) = C =: V1 we have z2 (U2 ) = (C\{0}) ∪ {∞} =: V2 . In that manner, the extended complex plane C ∪ {∞} is equipped with the structure of a Riemann surface with coordinate charts id : V1 → C and V2 → C 1 z → . z Thus, we have two equivalent pictures or models of the Riemann sphere, namely the sphere S 2 ⊂ R3 on one hand and the extended complex plane C ∪ {∞} on the other hand. The stereographic projection z1 : S 2 → C ∪ {∞} is a conformal map. In Chapter 5, we shall see a third model or interpretation of the Riemann sphere, namely 1-dimensional complex projective space P1 . The model provided by C ∪ {∞} also oﬀers the interpretation of a meromorphic function on an open subset of C, or more generally, of a meromorphic function of a Riemann surface S, as a holomorphic map g : S → C ∪ {∞}. Namely, a function g on S is meromorphic precisely if every point p ∈ S possesses a coordinate neighborhood U such that either g or g1 is holomorphic on U . This, however, is the same as saying that we can ﬁnd a

2.2 Some Simple Properties of Riemann Surfaces

19

neighborhood U of p for which g maps U holomorphically either to V1 or V2 . 3) The torus, also introduced in Sec. 1.1, is a Riemann surface; the charts introduced there satisfy the conditions for a conformal atlas. 4) If S is a Riemann surface with conformal charts {Uβ , zβ }, and π : S → S a local homeomorphism, then there is a unique way of making S a Riemann surface such that π becomes holomorphic. The charts {Uα , zα } for S −1 are constructed such that π | Uα is bijective, and the zβ ◦ π ◦ z α are holomorphic wherever they are deﬁned. Thus h ◦ π will be holomorphic on S if and only if h is holomorphic on S. 5) If π : S → S is a (holomorphic) local homeomorphism of Riemann surfaces, then every covering transformation ϕ is conformal. Indeed, we can assume by 4) that zα = zα ◦ π. To say that ϕ is conformal means that −1 −1 zβ ◦ ϕ ◦ z α is conformal wherever it is deﬁned. But zβ ◦ ϕ ◦ z α = zβ ◦ π ◦ ϕ ◦ π −1 ◦ zα−1 = zβ ◦ zα−1 , which is indeed conformal.

Exercises for § 2.1 1) Let S be a Riemann surface, and π : S → S a covering for which every covering transformation is conformal. Introduce on S the structure of a Riemann surface in such a way that π becomes holomorphic. Discuss a torus and H/Γ of exercise 3) in § 1.3 as examples. 2) Let S be a Riemann surface. Show that one may ﬁnd a conformal atlas {Uα , zα } (compatible with the one deﬁning the conformal structure of S) for which for every α, zα maps Uα onto the unit disk D := {z ∈ C : |z| < 1}. Thus, every Uα is conformally equivalent to D.

2.2 Some Simple Properties of Riemann Surfaces Lemma 2.2.1 On a compact Riemann surface S, every subharmonic function (hence also every harmonic or holomorphic function) is constant. Proof. Let f : S → R be subharmonic. Since S is compact, f as a continuous function on S attains its maximum at some p ∈ S. Let z : U → C be a local chart with p ∈ U . Then f ◦ z −1 is subharmonic on z(U ) and attains its maximum at an interior point, and is therefore constant by the maximum principle. Thus the closed subset of S where f attains its maximum is also open, and hence is all of S.

Lemma 2.2.2 Let S be a simply-connected surface, and F : S → C a continuous function, nowhere vanishing on S. Then log F can be deﬁned on S, i.e. there exists a continuous function f on S with ef = F .

20

Proof.

2 Diﬀerential Geometry of Riemann Surfaces

Every p0 ∈ S has an open connected neighbourhood U with F (p) − F (p0 ) < F (p0 )

for p ∈ U , since F (p0 ) = 0. Let {Uα } be the system consisting of these neighbourhoods, (log F )α a continuous branch of the logarithm of F in Uα , and Fα = {(log F )α + 2nπi, n ∈ Z}. Then the assumptions of Lemma 1.4.1 are satisﬁed, hence there exists an f such that, for all α, f|Uα = (log F )α + nα · 2πi,

nα ∈ Z.

Then f is continuous, and ef = F .

Lemma 2.2.2 can also be proved as follows. We consider the covering exp = ez : C → C\{0}. By Theorem 1.3.1, the continuous map F : S → C\{0} can be lifted to a continuous map f : S → C with ef = F , since S is simply connected. Lemma 2.2.3 Let S be a simply connected Riemann surface, and u : S → R a harmonic function. Then there exists a harmonic conjugate to u on the whole of S. (v is called a harmonic conjugate of u if u + iv is holomorphic.) Proof. Let the Uα be conformally equivalent to the disc, and vα a harmonic conjugate of u in Uα . Let Fα := {vα + c, c ∈ R}. Then, by Lemma 1.4.1, there exists v such that, for all α, v|Uα = vα + cα

for a cα ∈ R.

Such a v is harmonic, and conjugate to u.

2.3 Metrics on Riemann Surfaces We begin by introducing some general concepts: Deﬁnition 2.3.1 A conformal Riemannian metric on a Riemann surface Σ is given in local coordinates by λ2 (z) dz dz,

λ(z) > 0

(we assume λ is C ∞ ; this class of metrics is suﬃcient for our purposes). If w → z(w) is a transformation of local coordinates, then the metric should transform to ∂z ∂z dw dw λ2 (z) ∂w ∂w ∂ ∂ ∂ ∂ ∂ ∂ , ∂w .) = 12 ∂u − i ∂v = 12 ∂u + i ∂v (with w = u + iv, ∂w

2.3 Metrics on Riemann Surfaces

21

The length of a rectiﬁable curve γ on Σ is given by λ(z) |dz|, (γ) := γ

and the area of a measurable subset B of Σ by i Area (B) := λ2 (z) dz ∧ dz 2 B (the factor 2i arises because dz ∧ dz = (dx + idy) ∧ (dx − i dy) = −2i dx ∧ dy). We shall usually write i dz dz 2

in place of

i dz ∧ dz. 2

The distance between two points z1 , z2 of Σ is deﬁned as d(z1 , z2 ) := inf{(γ) : γ : [0, 1] → Σ a (rectiﬁable) curve with γ(0) = z1 , γ(1) = z2 }. The metric is said to be complete if every sequence (tn )n∈N in Σ which is Cauchy with respect to d(· , ·) (i.e. for every ε > 0 there exists n0 ∈ N such that d(tn , tm ) < ε for all n, m ≥ n0 ) has a limit in Σ. We leave it as an exercise to the reader to verify that the metric topology deﬁned by the distance function d(· , ·) coincides with the original topology of Σ as a manifold. Deﬁnition 2.3.2 A potential for the metric λ2 (z)dzdz is a function F (z) such that ∂ ∂ F (z) = λ2 (z). 4 ∂z ∂z The following lemma is immediate: Lemma 2.3.1 Arc lengths, areas and potentials do not depend on the local coordinates.

A metric is most simply described by means of a potential. Since a potential is invariant under coordinate transformations (and hence also under isometries, cf. Def. 2.3.5 and Lemma 2.3.2 below), it provides the easiest method of studying the transformation behaviour of the metric. Deﬁnition 2.3.3 The Laplace-Beltrami operator with respect to the metric λ2 (z) dzdz is deﬁned by 4 ∂ ∂ λ2 ∂z ∂z ∂ 1 ∂ , = 2 + λ ∂x2 ∂y 2

∆ :=

z = x + iy.

22

2 Diﬀerential Geometry of Riemann Surfaces

Deﬁnition 2.3.4 The curvature of the metric λ2 (z) dzdz is deﬁned by K = −∆ log λ. Remark.

With z = x + iy, we have λ2 (z) dz dz = λ2 dx2 + dy 2 .

Thus the metric diﬀers from the Euclidian metric only by the conformal factor λ2 . In particular, the angles with respect to λ2 dzdz are the same as those with respect to the Euclidian metric. Deﬁnition 2.3.5 A bijective map h : Σ1 → Σ2 between Riemann surfaces, with metrics λ2 dzdz and 2 dwdw respectively, is called an isometry if it preserves angles and arc-lengths. Remark. We have assumed here that angles are oriented angles. Thus, anticonformal maps cannot be isometries in our sense. Usually, the concept of an isometry permits orientation-reversing maps as well, for instance reﬂections. Thus, what we have called an isometry should be more precisely called an orientation-preserving isometry. Lemma 2.3.2 With the notation of Def. 2.3.5, h = w(z) is an isometry if and only if it is conformal and 2 (w(z))

∂w ∂w = λ2 (z) ∂z ∂z

(in local coordinates). If F1 and F2 are the respective potentials, then F1 (z) = F2 (w(z)) for an isometry. The Laplace-Beltrami operator and the curvature K are invariant under isometries. Remark.

An isometry has thus the same eﬀect as a change of coordinates.

Proof. Conformality is equivalent to the preservation of angles, and the transformation formula of the lemma is equivalent to the preservation of arclength. Finally, 4 ∂ ∂ 2 2 ∂ ∂ 2 ∂z ∂z log log λ = 4λ 2 ∂w ∂w ∂z ∂z ∂w ∂w ∂ ∂ 4 log λ2 , = 2 λ ∂z ∂z since the conformality of f implies that ∂ ∂z ∂ ∂z =0= . ∂z ∂w ∂z ∂w This is equivalent to the invariance of the curvature.

2.3 Metrics on Riemann Surfaces

23

The trivial example is of course that of the Euclidian metric dz dz = dx2 + dy 2 on C. This has K ≡ 0. We also have the following simple Lemma 2.3.3 Every compact Riemann surface Σ admits a conformal Riemannian metric. Proof. For every z ∈ Σ, there exists a conformal chart on some neighbourhood Uz fz : Uz → C. We ﬁnd some small open disk Dz ⊂ fz (Uz ), and we consider the restricted chart ϕz = fz|fz−1 (Dz ) : Vz (:= Uz ∩ fz−1 (Dz )) → C. Since Σ is compact, it can be covered by ﬁnitely many such neighbourhoods Vzi , i = 1, . . . , m. For each i, we choose a smooth function ηi : C → R with ηi > 0 on Dzi ,

ηi = 0 on C\Dzi .

On Dzi , we then use the conformal metric ηi (w) dw dw. This then induces a conformal metric on Vzi = ϕ−1 zi (Dzi ). The sum of all these local metrics over i = 1, . . . , n then is positive on all of Σ, and hence yields a conformal metric on Σ.

We now want to consider the hyperbolic metric. For this purpose, we make some preparatory remarks. Let D := {z ∈ C : |z| < 1} be the open unit disc and H := {z = x + iy ∈ C : y > 0} = the upper half plane in C. For z0 ∈ D, (z − z0 )/(1 − z 0 z) deﬁnes a conformal self-map of D carrying z0 to 0. Similarly, for any z0 ∈ H, z − z0 z → z − z0 is a conformal map of H onto D, mapping z0 to 0. It follows in particular that H and D are conformally equivalent.

24

2 Diﬀerential Geometry of Riemann Surfaces

H and D are Poincar´e’s models of non-euclidean, or hyperbolic3 , geometry, of which we now give a brief exposition. We shall need the following Deﬁnition 2.3.6 A M¨ obius transformation is a map C ∪ {∞} → C ∪ {∞} of the form az + b with a, b, c, d ∈ C, ad − bc = 0. z → cz + d We ﬁrst recall the Schwarz lemma (see e.g. [A1]). Theorem 2.3.1 Let f : D → D be holomorphic, with f (0) = 0. Then |f (z)| ≤ |z| and |f (0)| ≤ 1. If |f (z)| = |z| for one z = 0, or if |f (0)| = 1, then f (z) = eiα z for an α ∈ [0, 2π). An invariant form of this theorem is the theorem of Schwarz-Pick: Theorem 2.3.2 Let f : D → D be holomorphic. Then, for all z1 , z2 ∈ D, f (z ) − f (z ) |z1 − z2 | 1 2 , (2.3.1) ≤ 1 − f (z1 )f (z2 ) |1 − z 1 z2 | and, for all z ∈ D

1 |f (z)| ≤ . (2.3.2) 1 − |f (z)|2 1 − |z|2 Equality in (2.3.1) for some two distinct z1 , z2 or in (2.3.2) for one z implies that f is a M¨ obius transformation (in which case both (2.3.1) and (2.3.2) are identities). (More precisely, f is the restriction to D of a M¨ obius transformation that maps D to itself.) Proof. We reduce the assertions of the theorem to those of Theorem 2.3.1 by means of M¨ obius transformations, namely, with w = f (z), and w1 = f (z1 ), let w1 − w z1 − z , ξ(w) := . v := ω −1 (z) := 1 − z1z 1 − w1 w Then ξ ◦ f ◦ ω satisﬁes the assumptions of Theorem 2.3.1. Hence |ξ ◦ f ◦ ω(v)| ≤ |v|, which is equivalent to (2.3.1). Further we can rewrite (2.3.1) (for z = z1 ) as 1 |f (z1 ) − f (z)| 1 · . ≤ |z1 − z| |1 − z 1 z| |1 − f (z1 )f (z)| 3

We shall use the words “hyperbolic” and “non-euclidean” synonymously, although there exist other geometries (of positive curvature) that deserve the appellation “non-euclidean” as well; see the remarks on elliptic geometry at the end of this chapter.

2.3 Metrics on Riemann Surfaces

25

Letting z tend to z1 , we get (2.3.2); observe that |1 − ww| = |1 − |w|2 | = 1 − |w|2 for |w| < 1. The assertion regarding equality in (2.3.1) or (2.3.2) also follows from Theorem 2.3.1.

Analogously, one can prove Theorem 2.3.3 f (z ) − f (z ) |z − z | 1 2 1 2 , ≤ f (z1 ) − f (z2 ) |z1 − z 2 | and

1 |f (z)| ≤ , Imf (z) Im(z)

z1 , z2 ∈ H,

z ∈ H.

(2.3.3)

(2.3.4)

Equality for some z1 = z2 in (2.3.3) or for some z in (2.3.4) holds if and only if f is a M¨ obius transformation (in which case both inequalities become identities). (Here, in fact, f must have the form z → az+b cz+d with a, b, c, d ∈ R, ad−bc > 0.)

Corollary 2.3.1 Let f : D → D (or H → H) be biholomorphic (i.e. conformal and bijective). Then f is a M¨ obius transformation. Proof. After composing with a M¨obius transformation if necessary, we may suppose that we have f : D → D and f (0) = 0. Then, by Theorem 2.3.1, we have |f (0)| ≤ 1 and |(f −1 ) (0)| ≤ 1. Hence |f (0)| = 1, so that f must be a M¨obius transformation. Let now

SL(2, R) := : a, b, c, d ∈ R, ad − bc = 1 , 10 PSL(2, R) := SL(2, R)/ ± . 01 ab cd

Via z → (az + b)/(cz + d), an element of SL(2, R) deﬁnes a M¨obius transformation which maps H onto itself. Any element of PSL(2, R) can be lifted to SL(2, R) and thus deﬁnes a M¨ obius transformation which is independent of the lift.

26

2 Diﬀerential Geometry of Riemann Surfaces

We recall a general deﬁnition: Deﬁnition 2.3.7 A group G acts as a group of transformations or transformation group of a manifold E, if there is given a map G×E → E (g, x) → gx with for all g1 , g2 ∈ G, x ∈ E,

(g1 g2 )(x) = g1 (g2 x) and

for all x ∈ E

ex = x

where e is the identity element of G. (In particular, each g : E → E is a bijection, since the group inverse g −1 of g provides the inverse map). Specially important for us is the case when E carries a metric, and all the maps g : E → E are isometries. It is easy to see that the isometries of a manifold always constitute a group of transformations. Theorem 2.3.4 PSL(2, R) is a transformation group of H. The operation is transitive (i.e. for any z1 , z2 ∈ H, there is a g ∈ PSL(2, R) with gz1 = z2 ) and eﬀective (or faithful, i.e. if gz = z for all z ∈ H, then g = e). The isotropy group of a z ∈ H (which is by deﬁnition {g ∈ PSL(2, R) : g(z) = z}) is isomorphic to SO(2). Proof. The transformation group property is clear, and the faithfulness of the action is a consequence of the fact that we have normalised the determinant ad − bc to 1. To prove transitivity, we shall show that, given z = u + iv ∈ H, we can ﬁnd g with gi = z. Thus we are looking for ab ∈ SL(2, R) cd with

ai + b = u + iv ci + d

or equivalently, bd + ac = u, c2 + d2

1 = v. c2 + d2

We can always solve (2.3.5) with ad − bc = 1. In particular, if ai + b = i, ci + d

(2.3.5)

2.3 Metrics on Riemann Surfaces

27

we must have bd + ac = 0 c2 + d2 = 1 ad − bc = 1, so that (up to the freedom in the choice of the sign), a = d = cos ϕ,

b = −c = sin ϕ.

Thus the isotropy group at i is isomorphic to SO(2). For any other z ∈ H, any g ∈ PSL(2, R) with gi = z provides an isomorphism between the isotropy groups at i and z.

Deﬁnition 2.3.8 The hyperbolic metric on H is given by 1 dz dz y2

(z = x + iy).

Lemma 2.3.4 log y1 is a potential for the hyperbolic metric. The hyperbolic metric has curvature K ≡ −1. Also, it is complete. In particular, every curve with an endpoint on the real axis and otherwise contained in H has inﬁnite length.

Lemma 2.3.5 PSL(2, R) is the isometry group of H for the hyperbolic metric. Proof. By Lemma 2.3.2, an isometry h : H → H is conformal. For any curve γ in H, |dh(z)| |h (z)||dz| = h(γ) Imh(z) h(γ) Imh(z) |dz| , ≤ γ Imz and equality holds precisely when h ∈ PSL(2, R) (by Theorem 2.3.3).

Lemma 2.3.6 The hyperbolic metric on D is given by 4 (1 − |z|2 )

2

dz dz,

and the isometries between H and D are again M¨ obius transformations. Proof. This lemma again follows from Schwarz’s lemma, just like Theorems 2.3.2 and 2.3.3. It has of course to be kept in mind that, up to a M¨ obius transformation, w = (z − i)/(z + i) is the only transformation which carries 4

the metric y12 dzdz to the metric (1−|w| 2 )2 dwdw.

28

2 Diﬀerential Geometry of Riemann Surfaces

Consider now the map z → eiz =: w of H onto D\{0}. This local homeomorphism (which is actually a covering) induces on D\{0} the metric 1 |w|2

2

(log |w|2 )

dw dw

with potential 14 log log |w|−2 , i.e. the map becomes a local isometry between H with its hyperbolic metric and D\{0} with this metric. This metric is complete; in particular, every curve going to 0 has inﬁnite length. On the other hand, for every r < 1, {w : |w| ≤ r}\{0} has ﬁnite area. Finally, we consider brieﬂy the sphere S 2 = (x1 , x2 , x3 ) ∈ R3 : x21 + x22 + x23 = 1 , with the metric induced on it by the Euclidean metric dx21 + dx22 + dx23 of R3 . If we map S 2 onto C ∪ {∞} by stereographic projection: x1 + ix2 = z, 1 − x3

(x1 , x2 , x3 ) → then the metric takes the form 4 (1 + |z|2 )

2

dz dz,

as a computation shows. We shall brieﬂy state a few results concerning this case; we omit the necessary computations, which are straightforward: the curvature is K ≡ 1, Area (S 2 ) = 4π, the isometries are precisely the M¨obius transformations of the form az − c , |a|2 + |c|2 = 1. z → cz + a We now wish to introduce the concept of geodesic lines. Let γ : [0, 1] → Σ be a smooth curve. The length of γ then is 1 λ(γ(t)) |γ(t)| ˙ dt. (γ) = 0

We have 1 1 2 (γ) ≤ E(γ) = 2 2

1

˙ λ2 (γ(t)) γ(t) ˙ γ(t) dt. 0

(2.3.6)

2.3 Metrics on Riemann Surfaces

29

(E(γ) is called the energy of γ), with equality precisely if λ(γ(t)) |γ(t)| ˙ ≡ const.

(2.3.7)

in which case we say that γ is parametrized proportionally to arclength. Therefore, the minima of that satisfy (2.3.7) are precisely the minima of E. In other words, the energy functional E, when compared with , selects a distinguished parametrization for minimizers. We want to characterize the minimizers of E by a diﬀerential equation. In local coordinates, let γ(t) + s η(t) be a smooth variation of γ, −s0 ≤ s ≤ s0 , for some s0 > 0. If γ minimizes E, we must have d E(γ + sη) 0= ds s=0 1 1 2 λ (γ) γ˙ η˙ + γ˙ η˙ + 2λ (λγ η + λγ η) γ˙ γ˙ dt (here, λγ = ∂λ = ∂γ etc.) 2 0 1 2 = Re λ (γ)γ˙ η˙ + 2λλγ γ˙ γ˙ η dt. 0

If the variation ﬁxes the end points of γ, i.e. η(0) = η(1) = 0, we may integrate by parts to obtain 1 2 λ (γ)¨ γ + 2λλγ γ˙ 2 η dt. 0 = −Re 0

If this holds for all such variations η, we must have γ¨ (t) +

2λγ (γ(t)) 2 γ˙ (t) = 0. λ(γ(t))

(2.3.8)

Deﬁnition 2.3.9 A curve γ satisfying (2.3.8) is called a geodesic. We note that (2.3.8) implies (2.3.7) so that any geodesic is parametrized proportionally to arclength. Since the energy integral is invariant under coordinate chart transformations, so must be its critical points, the geodesics. Therefore (2.3.8) is also preserved under coordinate changes. Of course, this may also be veriﬁed by direct computation. Lemma 2.3.7 The geodesics for the hyperbolic metric on H are subarcs of Euclidean circles or lines intersecting the real axis orthogonally (up to parametrization). Proof.

For the hyperbolic metric, (2.3.8) becomes z¨(t) +

2 z˙ 2 (t) = 0 z−z

(2.3.9)

30

2 Diﬀerential Geometry of Riemann Surfaces

for a curve z(t) in H. Writing z(t) = x(t) + i y(t), we obtain x ¨−

2x˙ y˙ = 0, y

y¨ +

x˙ 2 − y˙ 2 = 0. y

(2.3.10)

If x˙ = 0, then x is constant, and so we obtain a straight line intersecting the real axis orthogonally. If x˙ = 0, the ﬁrst equations of (2.3.10) yields x˙ = 0, i.e. x˙ = c0 y 2 , (c0 = const. = 0), y2 Since a geodesic is parametrized proportionally to arclength, we have 1 2 x˙ + y˙ 2 = c21 2 y We obtain

(c1 = const.).

2 y˙ c2 = 2 1 2 − 1. x˙ c0 y

This equation is satisﬁed by the circle (x − x0 )2 + y 2 =

c21 c20

that intersects the real axis orthogonally. A careful analysis of the preceding reasoning shows that we have thus obtained all geodesics of the hyperbolic metric.

Correspondingly, the geodesics on the model D of hyperbolic geometry are the subarcs of circles and straight lines intersecting the unit circle orthogonally. For our metric on the sphere S 2 , the geodesics are the great circles on 2 S ⊂ R3 or (in our representation) their images under stereographic projection. Thus, any two geodesics have precisely two points of intersection (which are diametrically opposite to each other). We can pass to a new space P (2, R) by identifying each point of S 2 with its diametrically opposite point. We then obtain the so-called elliptic geometry. In this space, two geodesics meet in exactly one point. If we think of geodesics as the analogues of the straight lines of Euclidean geometry, we thus see that, in elliptic geometry, we cannot draw a parallel to a given straight line g through a point p0 ∈ g, since every straight line through p0 does in fact meet g. In hyperbolic geometry on the other hand, there always exist, for every straight line g, inﬁnitely many parallels to g (i.e. straight lines which do not meet g) passing through a prescribed point p0 ∈ g.

2.3.A Triangulations of Compact Riemann Surfaces

31

However, all the other axioms of Euclidean geometry, with the single exception of the parallel postulate, are valid in both geometries; this shows that the parallel postulate is independent of the remaining axioms of Euclidean geometry. This discovery, which is of very great signiﬁcance from a historical point of view, was made independently by Gauss, Bolyai and Lobaˇcevsky at the beginning of the 19th century.

Exercises for § 2.3 1) Prove the results about S 2 stated at the end of § 2.3. 2) Let Λ be the group of covering transformations for a torus T . Let λ2 dzdz be a metric on C which is invariant under all elements of Λ (i.e. each γ ∈ Λ is an isometry for this metric). Then λ2 dzdz induces a metric on T . Let K be its curvature. Show K = 0. T

Having read § 2.5, you will of course be able to deduce this from the Gauss-Bonnet theorem. The argument needed here actually is a crucial idea for proving the general Gauss-Bonnet theorem (cf. Cor. 2.5.6).

2.3.A Triangulations of Compact Riemann Surfaces We let S be a compact surface, i.e. a compact manifold of dimension 2. A triangulation of S is a subdivision of S into triangles satisfying suitable properties: Deﬁnition 2.3.A.1 A triangulation of a compact surface S consists of ﬁnitely many “triangles” Ti , i = 1, . . . , n, with n

Ti = S.

i=1

Here, a “triangle” is a closed subset of S homeomorphic to a plane triangle ∆, i.e. a compact subset of the plane R2 bounded by three distinct straight lines. For each i, we ﬁx a homeomorphism ϕi : ∆i → Ti from a plane triangle ∆i onto Ti , and we call the images of the vertices and edges of ∆i vertices and edges, resp., of Ti . We require that any two triangles Ti , Tj , i = j, either be disjoint, or intersect in a single vertex, or intersect in a line that is an entire edge for each of them.

32

2 Diﬀerential Geometry of Riemann Surfaces

Remark.

Similarly, one may deﬁne a “polygon” on S.

The notion of a triangulation is a topological one. The existence of triangulations may be proved by purely topological methods. This is somewhat tedious, however, although not principally diﬃcult. For this reason, we shall use geometric constructions in order to triangulate compact Riemann surfaces. This will also allow us to study geodesics which will be useful later on as well. Only for the purpose of shortening our terminology, we say Deﬁnition 2.3.A.2 A metric surface is a compact Riemann surface equipped with a conformal Riemannian metric. The reader should be warned that this deﬁnition is not usually standard in the literature, and therefore, we shall employ it only in the present section. Let M be a metric surface with metric λ2 (z) dz dz. We recall the equation (2.3.8) for geodesics in local coordinates γ¨ (t) +

2λγ (γ(t)) 2 γ˙ (t) = 0. λ(γ(t))

(2.3.A.1)

Splitting γ(t) into its real and imaginary parts, we see that (2.3.A.1) constitutes a system of two ordinary diﬀerential equations satisfying the assumptions of the Picard-Lindel¨ of theorem. From that theorem, we therefore obtain Lemma 2.3.A.1 Let M be a metric surface with a coordinate chart ϕ : U → V ⊂ C. In this chart, let the metric be given by λ2 (z) dzdz. Let p ∈ V, v ∈ C. There exist ε > 0 and a unique geodesic (i.e. a solution of (2.3.A.1)) γ : [0, ε] → M with γ(0) = p γ(0) ˙ = v.

(2.3.A.2)

γ depends smoothly on p and v. We denote this geodesic by γp,v . If γ(t) solves (2.3.A.1), so then does γ(λt) for constant λ ∈ R. Thus γp,v (t) = γp,λv

t λ

for λ > 0, t ∈ [0, ε].

(2.3.A.3)

ε In particular, γp,λv is deﬁned on the interval γp,v depends 0, λ . Since smoothly on v as noted in the lemma and since v ∈ C : v2p := λ2 (p)vv = 1 is compact, there exists ε0 > 0 with the property that for any v with vp = 1, γp,v is deﬁned on the interval [0, ε0 ]. It follows that for any w ∈ C with wp ≤ ε0 , γp,w is deﬁned at least on [0, 1].

2.3.A Triangulations of Compact Riemann Surfaces

33

Let Vp := {v ∈ C : γp,v is deﬁned on [0, 1]} . Thus, Vp contains the ball {w ∈ C : wp ≤ ε0 } . We deﬁne the so-called exponential map expp : V → M

(identifying points in ϕ(U ) = V with the corresponding points in M )

v → γp,v (1). Lemma 2.3.A.2 expp maps a neighbourhood of 0 ∈ Vp diﬀeomorphically onto some neighbourhood of p. Proof.

The derivative of expp at 0 ∈ Vp applied to v ∈ C is d D expp (0)(v) = γp,tv (1) dt t=0 d = γp,v (t) dt t=0 = γ˙ p,v (0) =v

by deﬁnition of γp,v . Thus, the derivative of expp at 0 ∈ Vp is the identity. The inverse function theorem may therefore be applied to show the claim.

In general, however, the map expp is not holomorphic. Thus, if we use exp−1 p as a local chart, we preserve only the diﬀerentiable, but not the conformal structure. For that reason, we need to investigate how our geometric expressions transform under diﬀerentiable coordinate transformations. We start with the metric. We write z = z1 + i z2,

dz = dz 1 + i dz 2 ,

dz = dz 1 − i dz 2 .

Then

λ2 (z) dz dz = λ2 (z) dz 1 dz 1 + dz 2 dz 2 . If we now apply a general diﬀerentiable coordinate transformation z = z(x), i.e. z 1 = z 1 (x1 , x2 ),

z 2 = z 2 (x1 , x2 )

the metric transforms to the form 2 ∂z i ∂z i λ2 (z(x)) j k dxj dxk . ∂x ∂x i,j,k=1

with x = (x1 , x2 )

34

2 Diﬀerential Geometry of Riemann Surfaces

We therefore consider metric tensors of the form 2

gjk (x) dxj dxk

(2.3.A.4)

j,k=1

with a positive deﬁnite, symmetric metric (gjk )j,k=1,2 . Again, we require that gjk (x) depends smoothly on x. The subsequent considerations will hold for any metric of this type, not necessarily conformal for some Riemann surface structure. W.r.t. such a metric, the length of a curve γ(t) (γ : [a, b] → M ) is

b

(γ) =

gjk (γ(t)) γ˙ j (t) γ˙ k (t)

12

dt,

(2.3.A.5)

gjk (γ(t)) γ˙ j (t) γ˙ k (t) dt.

(2.3.A.6)

a

and its energy is 1 2

E(γ) =

b

a

As before, one has 2 (γ) ≤ 2(b − a) E(γ)

(2.3.A.7)

gjk (γ(t)) γ˙ j (t) γ˙ k (t) ≡ const.,

(2.3.A.8)

with equality iﬀ i.e. if γ is parametrized proportionally to arclength. The Euler-Lagrange equations for E, i.e. the equations for γ to be geodesic, now become γ¨ i (t) +

2

i Γjk (γ(t)) γ˙ j (t) γ˙ k (t) = 0

for i = 1, 2,

(2.3.A.9)

j,k=1

with i (x) = Γjk

2 1 il ∂ ∂ ∂ g (x) g (x) + g (x) − g (x) jl kl jk 2 ∂xk ∂xj ∂xl

(2.3.A.10)

l=1

where g jk (x) j,k=1,2 is the inverse matrix of (gjk (x))j,k=1,2 , i.e. 2 k=1

g jk gkl

1 = 0

for j = l for j = l.

(The derivation of (2.3.A.9) needs the symmetry gjk (x) = gkj (x) for all j, k.) We now use the local coordinates p ∈ M deﬁned by exp−1 p . We introduce polar coordinates r, ϕ on Vp , (x1 = r cos ϕ, x2 = r sin ϕ) on Vp , and call the resulting coordinates on M geodesic polar coordinates centered at p. By construction of expp , in these coordinates the lines r = t, ϕ = const. are geodesic.

2.3.A Triangulations of Compact Riemann Surfaces

35

We thus write the metric as g11 dr2 + 2g12 drdϕ + g22 dϕ2 . From (2.3.A.9), we infer i =0 for i = 1, 2 Γ11 in these coordinates, i.e. by (2.3.A.10) 2

g

∂ ∂ 2 g1l − g11 ∂r ∂l

il

l=1

= 0,

hence, since (g il ) is invertible, 2

∂ ∂ g1l − g11 = 0 ∂r ∂l

for l = 1, 2.

(2.3.A.11)

For l = 1, we obtain ∂ g11 = 0. (2.3.A.12) ∂r Since by the properties of polar coordinates, ϕ is undetermined for r = 0, gjk (0, ϕ) is independent of ϕ, and (2.3.A.12) implies g11 ≡ const. =: g.

(2.3.A.13)

(In fact, g = 1.) Inserting this into (2.3.A.11) yields ∂ g12 = 0. ∂r

(2.3.A.14)

By the transformation rules for transforming Euclidean coordinates into polar coordinates, we have g12 (0, ϕ) = 0 ( x1 = r cos ϕ, x2 = r sin ϕ, the metric in the coordinates x1 , x2 written as 2 j k j,k=1 γjk dx dx , hence g11 = g22 =

γjk γjk

∂xj ∂r ∂xj ∂ϕ

∂xk , ∂r ∂xk , ∂ϕ

g12 =

γjk

∂xj ∂xk , ∂r ∂ϕ

j

and ∂x ∂ϕ = 0 at r = 0). Thus, (2.3.A.14) implies g12 = 0.

(2.3.A.15)

Since the metric is positive deﬁnite, we ﬁnally have g22 > 0

for r > 0.

(2.3.A.16)

36

2 Diﬀerential Geometry of Riemann Surfaces

Lemma 2.3.A.3 Let δ > 0 be chosen such that expp : {v ∈ Vp : vp < δ} → M is injective. Then for every q = expp (v) with vp < δ, the geodesic γp,v is the unique shortest curve from p to q. In particular d(p, q) = vp . Proof.

Let γ(t), 0 ≤ t ≤ T be any curve from p to q. Let t0 := inf t ≤ T : γ(t) ∈ expp {vp < δ} , or t0 := T if no such t ≤ T can be found.

We shall show that the curve γ|[0,t0 ] is already longer than γp,v , unless it coincides with the latter one. For that purpose, we represent γ(t) as (r(t), ϕ(t)) for 0 ≤ t ≤ t0 in our geodesic polar coordinates and compute t0 1 g11 r˙ 2 (t) + 2g12 r(t) ˙ ϕ(t) ˙ + g22 ϕ˙ 2 (t) 2 dt (γ|[0,t0 ] ) = 0 t0 2 12 g r˙ (t) dt by (2.3.A.13), (2.3.A.15), (2.3.A.16) ≥ 0 t0 1 g 2 |r(t)| ˙ dt = 0 t0 1 g 2 r(t) ˙ dt ≥ 0 1

= g 2 r(t0 ) = max (δ, (γp,v ))

by deﬁnition of t0

≥ (γp,v ), with equality only if t0 = T and ϕ(t) = const., r(t) ˙ ≥ 0, i.e. if γ coincides

with γp,v up to parametrization. Corollary 2.3.A.1 Let M be a compact metric surface. There exists ε > 0 with the property that any two points in M of distance < ε can be connected by a unique shortest geodesic (of length < ε) (up to reparametrization). (Note, however, that the points may well be connected by further geodesics of length > ε.) Proof. By the last sentence of Lemma 2.3.A.1, expp depends smoothly on p. Thus, if expp is injective on the open ball {vp < δ}, there exists a neighbourhood Ω of p such that for all q ∈ Ω, expq is injective on {vq < δ}. Since M is compact, it may be covered by ﬁnitely many such neighbourhoods, and we then choose ε as the smallest such δ. Thus, for any p ∈ M , any point q in expp {vp < ε} can be connected with p by a unique shortest geodesic, , by Lemma 2.3.A.3.

namely the geodesic γp,exp−1 p (q)

2.3.A Triangulations of Compact Riemann Surfaces

37

For our purposes, these geodesic arcs are useful because they do not depend on the choice of local coordinates. While the equation (2.3.A.9) is written in local coordinates, a solution satisﬁes it for any choice of local coordinates, as the equation preserves its structure under coordinate changes. This may be veriﬁed by direct computation. It can also be seen from the fact that these geodesics minimize the length and energy integrals, and these are readily seen to be coordinate independent. Theorem 2.3.A.1 Any compact metric surface - and hence by Lemma 2.3.3 any Riemann surface - can be triangulated. Proof. The idea of the proof is very simple. We select a couple of points and connect them by geodesics. More precisely, we choose them in such a manner that each of them has a certain number of other ones that are so close that the shortest geodesic connection is unique. Those geodesic connections then subdivide our surface into small pieces. One might now try to choose the points so carefully that these pieces are already triangles. It seems easier, however, to simply subdivide those pieces that happen not to be triangles. Such nontriangular pieces may arise because some of our geodesic connection may intersect. The subdivision presents no problem because at any such intersection point, the geodesics intersect at a nonvanishing angle. We now provide the details. Let Σ be a metric surface. Let ε be as in Corollary 2.3.A.1. We select ﬁnitely many points p1 , . . . , pn ∈ Σ with the following properties: (i) ∀ p ∈ Σ ∃ i ∈ {1, . . . , n} : d(p, pi ) < ε (ii) ∀ i ∈ {1, . . . , n} ∃ j, k ∈ {1, . . . , n} : i = j, i = k, j = k: ε 3 ε d(pi , pk ) < 3 ε d(pj , pk ) < . 3 d(pi , pj ) <

Whenever i, j ∈ {1, . . . , n} and d(pi , pj ) < 3ε , we connect pi and pj by the unique shortest geodesic γi,j of Corollary 2.3.A.1. By Lemma 2.3.A.2, any two such geodesics γi,j and γk,l intersect at most once. Namely, if there were two points q1 and q2 of intersection, then q2 would have two diﬀerent preimages under expq1 , namely the two tangent vectors at the two geodesic subarcs of γi,j and γk,l from q1 to q2 ; since both these subarcs have length < ε by construction, this would contradict the local injectivity of expq1 . For any three points pi , pj , pk as in (iii), the union of the geodesic arcs γi,j , γj,k , γi,k subdivides Σ into a triangle T contained in {p : d(p, pi ) < 23 } and its exterior. This property may readily be deduced from the following observation. Any of the three geodesic arcs, say γi,j , may be extended as a geodesic up to a distance of length ε in both directions from either of its two endpoints, say

38

2 Diﬀerential Geometry of Riemann Surfaces

γi,j by Lemma 2.3.A.1. By Lemma 2.3.A.2 this extended geodesic arc then divides exppi {vpi < ε} into two subsets. T then is the intersection of three such sets. We now enlarge the collection {p1 , . . . , pn } to a collection {p1 , . . . , pN } by including all points where any two such geodesics γi,j , γk,l intersect (i, j, k, l = 1, . . . , n). This subdivides Σ into ﬁnitely many “polygons” with geodesic sides. All angles at the vertices are diﬀerent from 0, because by the uniqueness statement of Lemma 2.3.A.1 any two geodesics with the same initial direction coincide. Similarly, by Lemma 2.3.A.2, any polygon has at least three vertices. We now want to subdivide any such polygon P with more than three vertices into triangles in the sense of Def. 2.3.A.1. By construction, any two vertices of P have distance < 3ε . In order to carry out the subdivision, we always have to ﬁnd two vertices of any such polygon P whose shortest geodesic connection is contained in the interior of P . Thus, let us suppose that p0 is a vertex of P that cannot be connected in such manner with any other vertex of P . Let p1 and p2 be the two vertices adjacent to p0 , i.e. connected to p0 by an edge of P . Let γ0,1 be the edge from p0 to p1 , γ0,2 the one from p0 to p2 , and let γ1,2 be the shortest geodesic from p1 to p2 . γ0,1 , γ0,2 and γ1,2 form a geodesic triangle T . We claim that some such T does not contain any vertices of P in its interior. Otherwise, let p3 be a point on ∂P in the interior of T closest to p0 , with geodesic connection γ0,3 . The geodesic arcs γ0,1 , γ0,2 and γ1,2 can be continued beyond their endpoints up to a length of at least 3ε in each direction, by choice of ε. By uniqueness of short geodesics, γ0,3 cannot intersect any of these extended arcs, and γ0,3 therefore is contained in the interior of T . Assume that γ0,3 is contained in the interior of P , except for its endpoints. By choice of p3 , γ0,3 does not contain points of ∂P besides p0 and p3 . If p3 is a vertex, it can thus be connected to p0 in the interior of P contrary to the choice of p0 . Thus, let p3 be contained in some edge of P . Let p4 be one of the vertices of . We represent the part of between p3 and p4 as a (geodesic) smooth curve γ : [0, 1] → M , with γ(0) = p3 . Let γt be the geodesic arc from p0 to γ(t). By Lemma 2.3.A.1, γt depends smoothly on t. Let t0 be the smallest value of t for which the interior of t0 is not disjoint to ∂P . If no such t0 exists, then p0 can be connected to the vertex p4 in the interior of P , contrary to our assumption. If γt0 contains a vertex p5 , p5 can be connected to p0 in the interior of P , again a contradiction. Otherwise, however, γt0 is tangent to some edge of P . By the uniqueness statement of Lemma 2.3.A.1, it then has to coincide with that edge. This is only possible if that edge is γ0,1 or γ0,2 . In that case, we perform the same construction with the other vertex of , reaching the same conclusion. Thus, has to coincide with γ1,2 . P thus is the triangle T , and there is nothing to prove. If γ0,3 is contained in the exterior of P , we perform the same construction at another vertex that cannot be connected with any other vertex in the discussed manner, until we reach the desired conclusion, because it is impossible that for all vertices

2.4 Geometry of Hyperbolic Surfaces

39

the corresponding triangle T lies in the exterior of P , since P is contained in some geodesic triangle with vertices as in (ii). Thus, we may always construct a subdivision of Σ into triangles.

Exercises for § 2.3.A: 1) Show that for the unit disk D with the hyperbolic metric and p ∈ D, the exponential map expp is not holomorphic. Same for S 2 .

2.4 Discrete Groups of Hyperbolic Isometries. Fundamental Polygons. Some Basic Concepts of Surface Topology and Geometry. Deﬁnition 2.4.1 An action of the transformation group G on the manifold E is said to be properly discontinuous if every z ∈ E has a neighbourhood U such that {g ∈ G : gU ∩ U = ∅} is ﬁnite, and if z1 , z2 are not in the same orbit, i.e. there is no g ∈ G with gz1 = z2 , they have neighbourhoods U1 and U2 , resp., with gU1 ∩ U2 = ∅ for all g ∈ G. We have obviously: Lemma 2.4.1 If G acts properly discontinuously, then the orbit {gp : g ∈ G} of every p ∈ E is discrete (i.e. has no accumulation point in E). We now wish to study properly discontinuous subgroups Γ of PSL(2, R); Γ acts on H as a group of isometries. Being properly discontinuous, Γ has to be a discrete subgroup of PSL(2, R).4 Indeed, if gn → g for some sequence (gn ) in Γ , then gn z0 → gz0 for every z0 ∈ H, in contradiction to Lemma 2.4.1. In particular, Γ is countable, because every uncountable set in R4 , and hence also any such subset of SL(2, R) or PSL(2, R), has an accumulation point. We now form the quotient H/Γ : Deﬁnition 2.4.2 Two points z1 , z2 of H are said to be equivalent with respect to the action of Γ if there exists g ∈ Γ with gz1 = z2 . H/Γ is the space of equivalence classes, equipped with the quotient topology. This means that (qn )n∈N ⊂ H/Γ converges to q ∈ H/Γ if and only if it is 4

SL(2, R) = {

ab cd

: ad − bc = 1} is a subset of R4 in a natural way, and thus is

an b n ab equipped with a topology: → if and only if an → a, . . . , dn → d. cn dn cd This then also induces a topology on PSL(2, R). For every z ∈ H, the map g → gz from PSL(2, R) to H is continuous.

40

2 Diﬀerential Geometry of Riemann Surfaces

possible to represent each qn by an element zn ∈ H in the equivalence class deﬁned by qn such that (zn )n∈N converges to some z ∈ H in the equivalence class of q. If the action of Γ is free from ﬁxed points, i.e. gz = z for all z ∈ H and all g = id in Γ , then H/Γ becomes a Riemann surface in a natural way. For p0 ∈ H/Γ , choose z0 ∈ π −1 (p0 ); since Γ is ﬁxed-point-free and properly discontinuous, z0 has a neighbourhood U such that g(U )∩U = ∅ for g = id in Γ , so that π : U → π(U ) is a homeomorphism. But this procedure provides H/Γ not only with a Riemann surface structure, but also a hyperbolic metric, because PSL(2, R) acts by isometries on H. In order to develop some geometric understanding of such surfaces H/Γ , we start by establishing some elementary results in hyperbolic geometry. Let SL(2, R) operate as before on the upper half plane H via z →

az + b cz + d

(a, b, c, d ∈ R, ad − bc = 1).

Lemma 2.4.2 Each γ ∈ SL(2, R), γ = identity, either has one ﬁxed point in H, one ﬁxed point on the extended real line R = R ∪ {∞} = ∂H, or two ab ﬁxed points on ∂H. If γ = , this corresponds to |tr γ| < 2, |tr γ| = cd 2, or |tr γ| > 2, resp., with tr γ := a + d. Proof.

If z is a ﬁxed point of γ, then c z 2 + (d − a) z − b = 0,

1 a−d a−d (a − d)2 + 4 b c ± ± = (a + d)2 − 4, z= 2 2c 4c 2c 2c using a d − b c = 1, and the conclusion easily follows.

i.e.

Deﬁnition 2.4.3 An element of SL(2, R) with one ﬁxed point in H is called elliptic, an element with one ﬁxed point on R parabolic, and one with two ﬁxed points on R hyperbolic.5 In order to see the geometric relevance of the distinction between elliptic, parabolic and hyperbolic automorphisms of H, let us discuss some examples: – In the proof of Theorem 2.3.4, we have already determined all the transformations that ﬁx i, 5

This use of the word “hyperbolic” is not quite compatible with its use in “hyperbolic” geometry as now only certain isometries of hyperbolic space are called “hyperbolic”. This is unfortunate, but we are following customary terminology here.

2.4 Geometry of Hyperbolic Surfaces

41

ai + b =i ci + d An example is the transformation z → − z1 that also maps 0 to ∞ and, in fact, is a reﬂection in the sense that every geodesic through i gets mapped onto itself, but with the direction reversed. Other such elliptic elements do not leave geodesics through i invariant. (The elliptic elements are perhaps even more easily understood when we let them operate on the unit disk D in place of H as our model space. In fact, the elliptic elements leaving the origin 0 of D ﬁxed are simply the rotations z → eiα z with real α.) – The transformation γ : z → z + 1 is parabolic as it has a single ﬁxed point on the boundary, namely ∞.This is already the typical case: If ∞ is ab a ﬁxed point of γ, with γ = , then c = 0, and, if γ is parabolic, by cd Lemma 2.4.1 a + d = 2. Since also a d = 1, it follows that 1b γ= . 01 z has a single ﬁxed point on the boundary, namely 0, and Likewise, z → z+1 is thus parabolic. – The transformation of the form λ 0 , γ= 0 λ−1

i.e. z → λ2 z, with real λ = 1, is hyperbolic. It ﬁxes 0 and ∞. Again, this is the typical case as by applying an automorphism of H, we may assume that the two ﬁxed points of our hyperbolic transformation are 0 and ∞. Such a γ leaves the geodesic connected these two points, namely the imaginary axis, invariant. This can be trivially seen by direct inspection of the operation of γ. A more abstract reason is that automorphisms of H are isometries with respect to the hyperbolic metric and therefore map geodesics to geodesics, and geodesics are uniquely determined by their endpoints on the boundary of H (see Lemma 2.3.6). In particular, since γ has no other ﬁxed points, the imaginary axis is the only geodesic left invariant. On that geodesic, it operates as a translation, that is, shifts points along it by the distance

λ2 vi vi

1 dy = log λ2 . y

Lemma 2.4.3 Let H/Γ be a compact Riemann surface for a subgroup Γ of PSL(2, R), as described in 2.4. Then all elements of Γ are hyperbolic. Proof. Γ cannot contain elliptic elements, because it has to operate without ﬁxed points in H.

42

2 Diﬀerential Geometry of Riemann Surfaces

Let γ ∈ Γ . Since H/Γ is compact, there exists some z0 in a fundamental region with (2.4.1) d(z0 , γ z0 ) ≤ d(z, γ z) for all z ∈ H, where d denotes hyperbolic distance. Assume now that γ is parabolic. By applying an automorphism of H, we may assume that ∞ is the unique ﬁxed point of γ, and as we have seen above, before the statement of the present lemma, γ is of the form 1b γ= . 01 Then for each z ∈ H, d(z, γ z) = d(z, z + b), and this goes to zero as Im z → ∞. Thus, if γ is parabolic there can be no z0 satisfying (2.4.1), as γ has no ﬁxed point in H. Therefore, γ cannot be parabolic.

Lemma 2.4.4 Let again H/Γ be a compact Riemann surface. Then for each γ ∈ Γ, γ = identity, the free homotopy class of loops determined by γ contains precisely one closed geodesic (w.r.t. the hyperbolic metric). Proof. By applying an automorphism of H, we may assume that γ has 0 and ∞ as its ﬁxed points (recall that γ is hyperbolic by Lemma 2.4.3). Thus, as we have already seen before Lemma 2.4.3, γ is of the form λ 0 , γ= 0 λ−1 i.e. z → λ2 z, and there is precisely one geodesic of H which is invariant under the action of γ, namely the imaginary axis. A moment’s reﬂection shows that the closed geodesics on H/Γ are precisely the projections of geodesics on H which are invariant under some nontrivial element of Γ , and this element of Γ of course determines the homotopy class of the geodesic.

From the preceding proof and the discussion before Lemma 2.4.3, we also observe that the length of that closed geodesic on H/Γ is log λ2 because γ identiﬁes points that distance apart on the imaginary axis. Deﬁnition 2.4.4 An open subset F of H is called a fundamental domain for Γ if every z ∈ H is equivalent under the action of Γ to a point z in the closure of F , whereas no two points of F are equivalent. Deﬁnition 2.4.5 A fundamental domain F is said to be a fundamental polygon if ∂F is a ﬁnite or countable union of geodesic arcs (together with their limit points in the latter case), the intersection of two such arcs being a single common end-point if non-empty.

2.4 Geometry of Hyperbolic Surfaces

43

We shall now construct a fundamental polygon for a given group Γ . For simplicity, we shall restrict ourselves to the case when Γ is ﬁxed-point-free and H/Γ is compact; this is also the case we shall be mainly concerned with in the rest of this book. Theorem 2.4.1 Suppose Γ ⊂ PSL(2, R) acts properly discontinuously and without ﬁxed points on H, and that H/Γ is compact. Let z0 ∈ H be arbitrary. Then F := {z ∈ H : d(z, z0 ) < d(z, gz0 ) for all g ∈ Γ } 6 is a convex 7 fundamental polygon for Γ with ﬁnitely many sides. For every side σ of F , there exists precisely one other side σ of F such that gσ = σ for a g ∈ Γ . Diﬀerent pairs of such sides are carried to each other by diﬀerent elements of Γ . Deﬁnition 2.4.6 Such a fundamental polygon is called the metric (or Dirichlet) fundamental polygon with respect to z0 . Proof of Theorem 2.4.1. Since H/Γ is compact, F is bounded. Indeed, if diam (H/Γ ) := sup{d(z1 , z2 ) : z1 , z2 ∈ H/Γ }, where d(·, ·) now denotes the induced hyperbolic metric on H/Γ , then diam F ≤ diam (H/Γ ). For each g ∈ Γ , the line {z ∈ H : d(z, z0 ) = d(z, gzo )} is a geodesic. (Actually, for every two z1 , z2 ∈ H, L = {z ∈ H : d(z, z1 ) = d(z, z2 )} is geodesic. In order to see this, we ﬁrst apply an isometry of H so that we can assume that z1 , z2 are symmetric to the imaginary axis. Then L is the imaginary axis, hence geodesic.) Since F is bounded (so that F is compact), there can exist only ﬁnitely many g ∈ Γ such that d(z, z0 ) = d(z, gz0 )

for some z ∈ F ;

indeed, since Γ operates properly discontinuously, Lemma 2.4.1 ensures that, for every K > 0, there are only ﬁnitely many g ∈ Γ with d(z0 , gz0 ) ≤ K. Thus F is the intersection of ﬁnitely many half-planes (with respect to hyperbolic geometry) of the form {z ∈ H : d(z, z0 ) < d(z, gz0 )};

6 7

d(· , ·) denotes the distance with respect to the hyperbolic metric. “Convex” means that the geodesic segment joining any two points of F is entirely contained in F .

44

2 Diﬀerential Geometry of Riemann Surfaces

let g1 , . . . , gm be the elements thus occuring. In particular, F is convex and has ﬁnitely many sides, all of which are geodesic arcs. The intersection of two of these arcs (when not empty) is a common end-point, and the interior angle of F at the vertex is less than π. To prove that every z ∈ H has an equivalent point in F , we ﬁrst determine a g ∈ Γ such that d(z, gz0 ) ≤ d(z, g z0 )

for all g ∈ Γ.

Then g −1 z is equivalent to z, and it lies in F since the action of Γ , being via isometries, preserves distances: d(g −1 z, z0 ) ≤ d(g −1 z, g −1 g z0 )

for all g ∈ Γ,

and g −1 g runs through all of Γ along with g . Conversely, if z is a point of F , then d(z, z0 ) < d(z, gz0 ) = d(g −1 z, z0 ) for all g ∈ Γ , so that no other point equivalent to z lies in F . Thus F is a fundamental polygon. A side σi of F is given by σi = {z : d(z, z0 ) = d(z, gi z0 ), d(z, z0 ) ≤ d(z, gz0 ) for all g ∈ Γ }.

(2.4.2)

Since d(gi−1 z, gz0 ) = d(z, gi gz0 ), we have for z ∈ σi d(gi−1 z, z0 ) ≤ d(gi−1 z, gz0 )

for all g ∈ Γ,

with equality for g = gi−1 . Thus gi−1 carries σi to a diﬀerent side. Since F is a convex polygon (with interior angles < π), gi−1 carries all other sides of F outside F . Thus, diﬀerent pairs of sides are carried to each other by diﬀerent transformations. Further, the transformation which carries σi to another side is uniquely determined since, for an interior point of σi , equality holds in the inequality sign in (2.4.2) only for g = gi . Thus all the assertions of the theorem have been proved.

Corollary 2.4.1 The transformations g1 , . . . , gm (deﬁned in the proof of Theorem 2.4.1) generate Γ . Proof. For any g ∈ Γ , we consider the metric fundamental polygon F (g) with respect to gz0 . Among the F (g ), only the F (gi ) have a side in common with F , and gi−1 carries F (gi ) to F . If now F (g ) has a side in common with F (gi ) say, then gi−1 F (gi ) has a side in common with F , so that there exists j ∈ {1, . . . , m} with gj−1 gi−1 F (g ) = F . Now, any F (g0 ) can be joined to F by a chain of the F (g) in which two successive elements have a common side; hence, by what we have seen above, F (g0 ) can be carried to F by a product

of the gi−1 . Hence g0 is a product of the gi .

2.4 Geometry of Hyperbolic Surfaces

45

Let us emphasize once again that, for a fundamental domain F of Γ ,

gF . H= g∈Γ

Thus the hyperbolic plane is covered without gaps by the closure of the fundamental domains gF , and these fundamental domains are pairwise disjoint. For the fundamental domain F of Theorem 2.4.1, the adjacent ones are precisely the gi F , the gi being as in Corollary 2.4.1. To help visualisation, we shall now discuss some examples, though they are rather simple compared to the situation considered in Theorem 2.4.1. Suppose ﬁrst that Γ is a cyclic group. If Γ is to be ﬁxed-point-free, then its generator must have its two ﬁxed points (distinct or coincident) on the real axis. Of course H/Γ is not compact in this case, but a metric fundamental polygon for Γ can be constructed exactly as in Theorem 2.4.1. We consider ﬁrst the parabolic case, when Γ has only one ﬁxed point on R ∪ {∞}. As explained above, by conjugating with a M¨ obius transformation, we may assume that the ﬁxed point is ∞, so that Γ is generated by a transformation of the form z → z + b (b ∈ R). Thus, for any z0 ∈ H, all the points gz0 (g ∈ Γ ) are of the form z0 + nb (n ∈ Z), i.e. lie on a line parallel to the real axis (which can be thought of as a circle with centre at inﬁnity). The F of Theorem 2.4.1 is given in this case by F = {z = x + iy : |x − Re z0 | <

b }, 2

see Fig.2.4.1. z Similarly, for the group Γ generated by the z → z+1 , the ﬁxed point of Γ is the point p = 0 on the real axis. In this case, the gz0 lie on a Euclidean circle around 0, and the sides of the metric fundamental polygon are again geodesics orthogonal to these circles, see Fig.2.4.2. More generally, given any 2 has that point p as its unique ﬁxed point and p ∈ R, the map z → z(p+1)−p z−p+1 generates a parabolic Γ . If the generator g1 of Γ is hyperbolic so that it has two ﬁxed points on R ∪ {∞}, we recall from our above discussion of hyperbolic transformations

Fig. 2.4.1.

46

2 Diﬀerential Geometry of Riemann Surfaces

Fig. 2.4.2.

that wecan by conjugation send the ﬁxed points e.g. to 0 and ∞. Then g1 z = λz, λ > 0. Hence the points equivalent to z0 lie on the ray from the origin through z0 , and F will be bounded by two circles orthogonal to these rays and the real axis, see Fig.2.4.3.

Fig. 2.4.3.

Correspondingly, for a generator g1 with ﬁxed points 0 and p ∈ R, the gz0 lie on the circle through 0, z0 and p, and the sides of F are orthogonal to this circle, see Fig.2.4.4.

2.4 Geometry of Hyperbolic Surfaces

47

Fig. 2.4.4.

Finally, we consider groups Γ of Euclidean motions. In the compact cases C/Γ is a torus as we shall see later. In this case, a metric fundamental polygon is in general not a fundamental parallelogram, but a hexagon. If e.g. 2πi Γ = {z → z + n + me 3 , n, m ∈ Z}, then one obtains a regular hexagon, see Fig.2.4.5.

Fig. 2.4.5.

Theorem 2.4.2 Under the assumptions of Theorem 2.4.1, there exists a fundamental polygon with ﬁnitely many sides, all of whose vertices are equivalent. Here again, every side a is carried by precisely one element of Γ to another side a , and the transformations corresponding in this way to distinct pairs of equivalent sides are distinct. The sides will be described in the order a1 b1 a1 b1 a2 b2 · · · ap bp ap bp ; in particular, the number of sides is divisible by 4. The proof will be carried out in several steps. We start from the fundamental polygon F of Theorem 2.4.1.

48

2 Diﬀerential Geometry of Riemann Surfaces

1) Construction of a fundamental domain with ﬁnitely many sides, all of whose vertices are equivalent. During this step, we shall denote equivalent vertices by the same letter. We choose some vertex p of F . If F has a vertex not equivalent to p, then F has also a side a with p as one end-point and q = p as another. We join p to the other adjacent vertex of q, say r, by a curve d in F . Let g be the element of Γ which carries the side b between q and r to another side b of F . We then get a new fundamental domain by replacing the triangle abd by its image under g; this fundamental domain has one p-vertex more, and one q-vertex less, than F . After repeating this process ﬁnitely many times, we ﬁnally get a fundamental domain with only p-vertices. q a

b

p

r

d

q

b’

d

p

r

r

q

r

a

d’ p

Fig. 2.4.6.

(For the curve d above, we could have chosen the geodesic arc from p to r the ﬁrst time, since F was convex. But the modiﬁcation made could destroy the convexity, so that it may not be possible to choose a geodesic diagonal inside the modiﬁed fundamental domain. We have therefore taken an arbitrary Jordan curve for d; thus the resulting fundamental domain is in general not a polygon. This defect will be rectiﬁed only at the very end of our construction.) 2) Lemma 2.4.5 With the above notation, a and a cannot be adjacent, i.e. cannot have a common vertex. Proof. Let g be the transformation carrying a to a . If F is the fundamental domain under consideration, then F and g(F ) are disjoint. Thus, if a and a

2.4 Geometry of Hyperbolic Surfaces

49

have a common end-point, this point must be ﬁxed by g (since g preserves orientation), in contradiction to our assumption that Γ acts without ﬁxed points.

3) Lemma 2.4.6 Let F be a fundamental domain all of whose vertices are equivalent. Then each g = Id in Γ carries at the most two vertices of F to vertices of F . In such a case, these two vertices are adjacent, and g carries the side of F between them to the side of F between their g-images. Proof. Let p0 be a vertex of F , which is carried by g ∈ Γ to another vertex p0 ; let a1 be a side of F with p0 as an end-point. Then either g(a1 ) ⊂ ∂F or

g(a1 ) ∩ ∂F = p0 .

In the ﬁrst case, let p1 be the other end-point of a1 , and a2 the side of F adjacent to a1 at p1 . Since g(p1 ) ∈ ∂F , there are again the same two possibilities for a2 . Continuing in this manner, we arrive at a ﬁrst vertex pj−1 and side aj such that g(aj ) ∩ ∂F = g(pj−1 ). Then we have, for pj and aj+1 , either g(aj+1 ) ∩ ∂F = ∅ or g(aj+1 ) ∩ ∂F = g(pj+1 ). In the ﬁrst case, we again continue, till we arrive at the ﬁrst vertex pk−1 and side ak with g(ak ) ∩ ∂F = g(pk ) (k > j). Continuing cyclically, we must return after ﬁnitely many steps to the vertex pm = p0 we started with. We now want to show that the whole chain ak+1 , ak+2 , . . . , am , a1 , . . . , aj−1 is mapped by g into ∂F . Thus, let F be the domain bounded by g(ak+1 ), . . . , g(aj−1 ) and the subarc of ∂F from g(pk ) to g(pj−1 ); here the latter is to be so chosen that F and F are disjoint. Similarly, let F be the domain bounded by g(aj ), . . . , g(ak ) and the subarc of ∂F from g(pj−1 ) to g(pk ). We must show that either F or F has empty interior. Now, ∂F ⊂ F ∪ g(F ), ∂F ⊂ F ∪ g(F ),

50

2 Diﬀerential Geometry of Riemann Surfaces

and g∈Γ g(F ) is the whole of H, while g1 (F ) and g2 (F ) have no interior point in common if g1 = g2 . Thus if F and F had non-empty interior, we would have F = g (F ) and F = g (F ) for some g , g = g; in particular the interiors of F and F would be fundamental domains. But g(a1 ) ⊂ ∂F , hence either F or F would have at least two sides fewer than g(F ). This is clearly impossible, since all images of F by elements of Γ of course have the same number of sides. Hence F = ∅ or F = ∅, as asserted. Without loss of generality, let F = ∅. Then the chain ak+1 , ak+2 , . . . , aj−1 is mapped by g into ∂F . If j = 1 and k = m, this chain is empty, and F ∩ g(F ) = g(p0 ) in this case. The important point to understand from the above considerations is however the following: if g maps two vertices of F into ∂F , then it also maps one of the two chains of sides between these two vertices into ∂F . (By the way, we have not so far made use of the assumption that all vertices of F are equivalent; hence the above statement holds even if there are several equivalence classes of vertices). We shall now show that the assumption that g = id carries more than two vertices into ∂F leads to a contradiction. Indeed, what we have proved above shows that, in such a situation, we can ﬁnd three successive vertices p1 , p2 , p3 which, along with the sides a1 and a2 between them, are mapped by g into ∂F .

Fig. 2.4.7.

We now modify F slightly: instead of joining a1 and a2 at the intermediate vertex p2 , we connect them by means of a small arc going around p2 . We modify g(a1 ∪a2 ) correspondingly. We then obtain a new fundamental domain with p2 or g(p2 ) as an interior point. But this is the desired contradiction, since the closure of this fundamental region contains points equivalent to p2 e.g. as boundary points. This proves the lemma.

4) In what follows, we need to use a modiﬁcation of the fundamental domain which generalises the one we have already used in 1):

2.4 Geometry of Hyperbolic Surfaces

51

Let a and a be equivalent sides of ∂F , so that a = ga for some g ∈ Γ . Let d be a diagonal curve which joins two vertices of F but otherwise lies in the interior of F . Then d divides F into two regions F1 and F2 . Let a ⊂ F 1 , a ⊂ F 2 . Then g(F1 ) has precisely the side a in common with F1 and F2 ∪ g(F1 ) is therefore again a fundamental domain (when the common sides are adjoined to it). 5) We now bring the sides to the desired order. We ﬁrst choose the ordering of the sides such that c is always to the right of c. Let c1 be a side for which the number of sides between c1 and c1 is minimal: this number is positive by Lemma 2.4.5. Then the arrangement of the sides looks like c1 c2 · · · c1 . . . c2

(2.4.3)

where the dots indicate the possible presence of other sides. If there are no such intermediate sides, we look among the remaining sides for a c with the distance between c and c minimal. Continuing this way, we must arrive at the situation of (2.4.3) with intermediate sides present (unless the sides are already in the desired order and there is nothing to prove). We now join the end-point of c1 with the initial point of c1 (end-point and initial point with respect to the chosen orientation of ∂F ) by a diagonal, say b1 , and apply the modiﬁcation of 4) to the pair c1 , c1 and the diagonal b1 . We then obtain a fundamental domain with sides in the order c1 b1 c1 · · · b1 . Without loss of generality, we may suppose that there are again some other sides between c1 and b1 . We now join the end-point of b1 with the initial point of b1 by a diagonal a1 and again apply the modiﬁcation of 4) to c1 , c1 and a1 and obtain the order a1 b1 a1 b1 · · · for sides of the new fundamental domain.

Fig. 2.4.8.

We repeat the above procedure for the remaining sides; this does not disturb the portion a1 b1 a1 b1 . After ﬁnitely many steps, we thus reach the desired order a1 b1 a1 b1 · · · ap bp ap bp .

52

2 Diﬀerential Geometry of Riemann Surfaces

6) In this last step we move the sides of the fundamental domain F constructed in 5) to geodesic arcs: We ﬁx a side a of F , and consider the geodesic

a with the same end-points. Let A(t, s) be a homotopy with A(·, 0) = a and A(·, 1) =

a such that none of the curves A(·, s) has self-intersections.8 We now deform the side a by the homotopy A(·, s) and the equivalent side a = g(a) by the homotopy g(A(·, s)). We wish to say that we obtain in this way a new fundamental domain Fs . Suppose ﬁrst that, as s increases from 0 to 1, the curve A(· , s) meets another side b without crossing any vertex. Then the domain acquires for example some points which were previously exterior to the fundamental domain; but these points (or points equivalent to them) will be taken away at the side b equivalent to b. Thus we will always be left with a fundamental domain.

b’

b

a’

Fig. 2.4.9. 8

The existence of such a homotopy is easy to prove. We would like to remark however that, in our constructions, the sides a may in any case be taken to lie in a suitably restricted class of curves (e.g. piecewise geodesic), and this makes the proof even simpler.

2.4 Geometry of Hyperbolic Surfaces

53

But the homotopy A(· , ·) never passes through a vertex. For suppose for an s ∈ [0, 1] that the vertex p is an interior point of the curve A(· , s). Then g would map both the end points of a (and thus also of A(· , s)) as well as p into ∂Fs . But this is excluded by Lemma 2.4.6. After performing the above homotopies for all pairs of equivalent sides (a, a ), we end up with a fundamental polygon with all the desired properties. This concludes the proof of Theorem 2.4.2.

Finally, we wish to discuss brieﬂy the structure of the fundamental group of a surface H/Γ . Theorem 2.4.3 Let H/Γ be a compact Riemann surface of genus p (> 1). Then the fundamental group π1 (H/Γ, p0 ) has 2p generators a1 , b1 , a2 , · · · , ap , bp with the single deﬁning relation −1 −1 −1 a1 b1 a−1 1 b1 a2 b2 · · · ap bp ap bp = 1.

Proof. We represent H/Γ by the fundamental domain given in Theorem 2.4.2. Let p0 be a vertex. Suppose e.g. that g ∈ Γ carries the side a1 to a1 . Then, since F ∩ gF = ∅, and g preserves orientations, g(a1 ) is a1 described in the opposite direction, i.e. a1 = a−1 1 in H/Γ , and similarly for the other sides. ¿From Corollary 2.4.1 and Theorem 1.3.4, it follows that a1 , b1 , · · · , ap , bp generate π1 (H/Γ, p0 ). By Theorem 1.3.2, a path is trivial in π1 (H/Γ, p0 ) if and only if its lift to H is closed. It follows that −1 −1 a1 b1 a−1 1 · · · ap bp ap bp = 1

is the only relation among the given generators. That this is indeed a relation is clear. We show that there are no other ones (apart from trivial ones like a1 a−1 1 = 1). This is not hard to see. Let c1 · · · ck = 1 be any such relation. It is then represented by a closed loop based at p0 . Since each cj , j = 1, . . . , k, is equivalent to a side of our fundamental domain, the loop is disjoint to the interiors of all translates of this fundamental domain. We claim that the loop is a multiple of −1 a1 b1 · · · a−1 p bp .

By what we have just said, it encloses a certain number of fundamental domains, and we shall see the claim by induction on this number. Let F be any such domain whose boundary contains part of the loop. Let c be such a boundary geodesic forming part of the loop. Replacing c by the remainder of this boundary, traversed in the opposite direction, yields a homotopic loop as −1 the boundary represents the trivial loop a1 b1 · · · a−1 p bp . We observe that we can always choose F in such a way that this replacement decreases the number of enclosed fundamental domains by one. This completes the induction step and the proof of the claim.

54

2 Diﬀerential Geometry of Riemann Surfaces

Corollary 2.4.2 Every compact Riemann surface of the form H/Γ has a non-abelian fundamental group.

Fig. 2.4.10.

Exercises for § 2.4 1) Let H/Γ be a compact Riemann surface. Show that each nontrivial abelian subgroup of Γ is inﬁnite cyclic. 2) Provide the details of the construction of a metric fundamental polygon for a group of Euclidean motions.

2.4.A The Topological Classiﬁcation of Compact Riemann Surfaces We start with Deﬁnition 2.4.A.1 A diﬀerentiable manifold M is called orientable if it possesses an atlas whose chart transitions all have positive functional determinant. An orientation of M consists in the choice of such an atlas. Corollary 2.4.A.1 Any Riemann surface is orientable, and a conformal atlas provides an orientation. Proof. All transition maps of a conformal atlas are holomorphic and therefore have positive functional determinant.

2.4.A The Topological Classiﬁcation of Compact Riemann Surfaces

55

In this section, we shall classify the possible topological types of twodimensional diﬀerentiable, orientable, triangulated, compact surfaces S. By Theorem 2.3.A.1 and Corollary 2.4.A.1, we shall therefore obtain a topological classiﬁcation of compact Riemann surfaces. Let (Ti )i=1,...,f be a triangulation of S as in Def. 2.3.A.1. We choose an orientation of S. That orientation then determines an orientation of each triangle Ti , i.e. an ordering of the vertices and we then orient ∂Ti in the manner induced by the ordering of the vertices. We note that if is a common edge of two adjacent triangle Ti and Tj , then the orientations of induced by Ti and Tj , resp., are opposite to each other. Let ϕ1 : ∆1 → T1 be a homeomorphism of a Euclidean triangle ∆1 ⊂ R2 onto the triangle T1 as in Def. 2.3.A.1. We now number the triangles T2 , . . . , Tn so that T2 has an edge in common with T1 . We then choose a triangle ∆2 ⊂ R2 that has an edge in common with ∆1 so that ∆1 ∪ ∆2 is a convex quadrilateral and a homeomorphism ϕ2 : ∆2 → T2 satisfying the requirements of Def. 2.4.A.1. Renumbering again, T3 has an edge in common with either T1 or T2 , and we choose an Euclidean triangle ∆3 so that ∆1 ∪ ∆2 ∪ ∆3 forms a regular convex pentagon and a homeomorphism ϕ3 : ∆3 → T3 as before. We iterate this process in such a manner that each new triangle ∆j shares an edge with precisely one of the preceding ones and is disjoint to all the other ones. We obtain a regular convex polygon Π. The orientations : Tj → ∆j in term of the triangles ∆j induced by the homeomorphism ϕ−1 j induce an orientation of ∂Π. This orientation will be called positive. Points in ∂Π that correspond to the same point in S will be called equivalent. Π has f + 2 edges, where f is the number of triangles Ti . Since each edge of Π belongs to precisely two of the Ti , precisely two edges of Π correspond to the same edge of the triangulation. Let a be an edge of Π. The induced orientation of a allows us to distinguish between an initial point p and a terminal point q of a. The other edge of Π equivalent to a then has initial point q and terminal point p because of our convention on orienting the edges of Π. Therefore, we denote that edge by a−1 . With this convention, the edges of Π are now labeled a, b, c, . . . , a−1 , b−1 , c−1 , . . .. By writing down these letters in the order in which the corresponding edges of ∂Π are traversed, we obtain the so-called symbol of Π (cf. Thm. 2.4.3.). The following process will repeatedly be applied below: We dissect Π by an interior straight line connecting two edges into two subgroups Π1 , Π2 , and we glue Π1 and Π2 along a pair of edges a and a−1 by

56

2 Diﬀerential Geometry of Riemann Surfaces

identifying equivalent points. We thus obtain a new polygon Π that again constitutes a model for S. After possibly applying a homeomorphism, we may again assume that Π is convex. This process will now be used in order to transform the symbol of Π into a particularly simple form as in Thm. 2.4.2. In fact what follows will essentially be the construction of steps 1), 2), 3), 4), 5) of the proof of that theorem. 1) (Corresponding to step 2 of the proof of Thm. 2.4.2) In case the symbol of Π contains the sequence aa−1 plus some other letters, these edges a and a−1 are now eliminated by identifying, i.e. glueing equivalent points on them. This step is repeated until either no such sequence aa−1 occurs any more, or the entire symbol is given by aa−1 . In the latter case, we have reached the desired form already. 2) (Corresponding to step 1 of the proof of Thm. 2.4.2) (Construction of a polygon with ﬁnitely many sides, all of whose vertices are equivalent). Let p be a vertex of Π. If Π possesses another vertex not equivalent to p, then it has an edge a with initial point p and terminal point q = p. We join p to the terminal vertex r of the edge b with initial point q, by a line d in Π. Note that by 1), b = a−1 . We obtain a triangle T with edges a, b, d. This triangle is now cut oﬀ along d, and its edge b is then glued to the edge b−1 of Π. The resulting Π then has one more vertex equivalent to p, while the number of vertices equivalent to q is decreased by one. After ﬁnitely many repetitions, we obtain a polygon with the desired property. 3) (Corresponding to step 4 of the proof of Thm. 2.4.2) Subsequently, we shall need the following type of modiﬁcation of Π that generalizes the one employed in 1): Let a, a−1 be edges of Π, and use an interior line d of Π connecting two of the vertices, in order to dissect Π into two parts Π1 , Π2 , with a ⊂ Π1 , a−1 ⊂ Π2 . We glue Π1 and Π2 along the edges a, a−1 . 4) (Corresponding to step 5 of the proof of Thm. 2.4.2) We ﬁrst label the edges of Π in such a manner that c−1 is always to the right of c. Let c1 be an edge for which the number of edges between c1 and c−1 1 is minimal. By 2), this number is positive. Thus, the arrangement looks like −1 c1 c2 · · · c−1 1 · · · c2 .

If there are no intermediate edges in the places denoted by dots, i.e. if we −1 in our symbol, we look among the already have the sequence c1 c2 c−1 1 c2 remaining edges for an edge c with minimal number of intermediate edges. When we arrive at the above situation with intermediate edges present, we connect the terminal point of c1 with the initial point of c−1 1 by a line b1 in and the diagonal b1 . F and apply the modiﬁcation of 3) to the pair c1 , c−1 1

2.5 The Theorems of Gauss-Bonnet and Riemann-Hurwitz

The resulting symbol is

57

−1 c1 b1 c−1 1 · · · b1 .

If there are intermediate edges between c−1 and b−1 1 1 , we join the terminal −1 point of b1 with the initial point of b1 by a line a1 in Π and apply the −1 modiﬁcation of 4) to c1 , c−1 1 and the diagonal a1 . We obtain the symbol −1 a1 b1 a−1 1 b1 · · · .

Repeating this process ﬁnitely many times, we conclude Theorem 2.4.A.1 The symbol of a polygon representing the diﬀerentiable, orientable, compact, triangulated surface S may be brought into either the form aa−1

(i) or (ii)

−1 −1 −1 −1 −1 a1 b1 a−1 1 b1 a2 b2 a2 b2 · · · ap bp ap bp .

In case (ii), all vertices are equivalent. In particular, the number of edges is either 2 or a multiple of 4. Deﬁnition 2.4.A.2 The genus of S as in Theorem 2.4.A.1 is 0 in case (i), p in case (ii), and the Euler characteristic is χ := 2 − 2p. Corollary 2.4.A.2 Two diﬀerentiable, orientable, compact, triangulated surfaces are homeomorphic iﬀ they have the same genus. Proof. A homeomorphism between two surfaces with the same symbol is produced by a vertex preserving homeomorphism between the corresponding polygons. That surfaces of diﬀerent genus are not homeomorphic follows for example from Thm. 2.4.3, noting that homeomorphic surfaces must have isomorphic fundamental groups by Lemma 1.2.3.

2.5 The Theorems of Gauss-Bonnet and Riemann-Hurwitz We now proceed to the Gauss-Bonnet formula for hyperbolic triangles. Theorem 2.5.1 Let B be a hyperbolic triangle in H (so that the sides of B are geodesic arcs) with interior angles α1 , α2 , α3 . Let K be the curvature of the hyperbolic metric (thus K ≡ −1). Then B

1 i dz dz = αi − π. 2 y 2 i=1 3

K

(2.5.1)

58

2 Diﬀerential Geometry of Riemann Surfaces

Proof.

Quite generally, we have i 4∂ 2 2 i dz dz = − log λ dz dz K ·λ 2 ∂z∂z 2 B B ∂ log λ |dz| =− ∂n ∂B

∂ ( ∂n denotes diﬀerentiation in the direction of the outward normal of ∂B), hence in our situation 1 1 i ∂ log |dz|. K 2 dz dz = − y 2 ∂n y B ∂B

Now, ∂B consists of three geodesic arcs a1 , a2 , a3 . Thus each ai is either a Euclidean line segment perpendicular to the real axis, or an arc of a Euclidean ∂ log y = 0 on ai ; in circle with centre on the real axis. In the former case, ∂n the latter case, we can write y = r sin ϕ in polar coordinates, so that ϕ2 ϕ2 1 1 ∂ ∂ 1 log |dz| = − log r dϕ = r dϕ = ϕ2 − ϕ1 , − ∂n y ∂r r sin ϕ ai ϕ1 ϕ1 r where the angles ϕ1 and ϕ2 correspond of course to the end-points of ai . Now an elementary geometric argument keeping in mind the correct orientations of the sides of B yields (2.5.1). (By a hyperbolic isometry, we can always assume in the above that one of ∂ log y = 0 on this the sides is an interval on the imaginary axis, so that ∂n side.)

Since K ≡ −1, we get: Corollary 2.5.1 hyperbolic area of the hyperbolic triangle with interior angles α1 , α2 , α3 , we have the formula Area(B) = π −

3

αi .

(2.5.2)

i=1

Although K is constant in our case, there are various reasons for giving the formula (2.5.1) the more prominent place. One reason is of course that our proof of (2.5.2) uses (2.5.1). But the most important reason is rather that (2.5.1) is valid for quite arbitrary metrics. Using the diﬀerential equation for the geodesics with respect to an arbitrary metric (see § 2.3.A), one can prove the general statement. We shall anyway prove the general Gauss-Bonnet formula for compact surfaces without boundary later on (Corollary 2.5.6). The Euclidean case is trivial, and the case of the spherical metric can be treated exactly in the same way as the hyperbolic case by means of the formulae given above. For this reason, we shall make use of the Gauss-Bonnet formula for geodesic triangles in all the three geometries.

2.5 The Theorems of Gauss-Bonnet and Riemann-Hurwitz

59

Corollary 2.5.2 Let P be a geodesic polygon in H with k vertices, of interior angles α1 , · · · αk . Then P

1 i dz dz = αi + (2 − k) π y2 2 i=1 k

K and

Area(P ) = (k − 2) π −

αi .

(2.5.3)

(2.5.4)

Proof. The proof is by dividing P into geodesic triangles: in every geodesic polygon which has more than 3 sides, we can ﬁnd two vertices which can be joined by a geodesic running in the interior of P . In this way, P will be divided into two sub-polygons with fewer sides. We repeat this process till P has been decomposed into (k − 2) triangles. The corollary now follows from the corresponding assertions for triangles, since the sum of the interior angles of the triangles at a vertex of P is precisely the interior angle of P at that vertex.

Corollary 2.5.3 Suppose Γ ⊂ PSL(2, R) operates without ﬁxed points and properly discontinuously on H and that H/Γ is compact. Then 1 i K 2 dz dz = 2π (2 − 2p) (2.5.5) y 2 H/Γ and Area(H/Γ ) = 2π (2p − 2)

(2.5.6)

where 4p is the number of sides of the fundamental polygon for Γ constructed in Theorem 2.4.2. Proof. Since all the vertices of the fundamental polygon for Γ constructed in Theorem 2.4.2 are equivalent under Γ , it follows that the sum of the interior angles of the polygon is exactly 2π. Indeed, if we draw a circle around any of the vertices of the polygon, we see that each point of the circle is equivalent to precisely one interior point or to some boundary point of the polygon. But the second alternative occurs only for ﬁnitely many points of the circle, so we conclude that the sum of the interior angles is indeed 2π. The assertions of the corollary now follow from Corollary 2.5.2.

Deﬁnition 2.5.1 The p of Theorem 2.4.2 is called the genus, and χ := 2−2p the Euler characteristic of the Riemann surface H/Γ . (Note that this coincides with the purely topological Def. 2.4.A.2.) It follows from Corollary 2.5.3 that p and χ are well-deﬁned, since they are invariants of the surface H/Γ and do not depend on the fundamental domain of Theorem 2.4.2. (In particular, every fundamental domain with the properties established in

60

2 Diﬀerential Geometry of Riemann Surfaces

Theorem 2.4.2 must have the same number of sides.) On the other hand, it follows from Theorem 2.4.2 that surfaces with the same genus or Euler characteristic are mutually homeomorphic, since one can directly produce a homeomorphism between the fundamental polygons given by the theorem which respects the boundary identiﬁcations. From Corollary 2.5.3 we also get: Corollary 2.5.4 For a Riemann surface of the form H/Γ, p > 1, i.e. χ < 0. As a consequence of the uniformization theorem (Thm. 4.4.1 below), in fact every compact Riemann surface is conformally equivalent to S 2 , or a torus C/M (M a module over Z of rank two, cf. § 2.7) or a surface H/Γ , since the universal covering is S 2 , C or H. But S 2 admits no non-trivial quotients; and the compact quotients of C are the tori. We shall have p = 1 for the torus and p = 0 for S 2 (so that χ = 0 and χ = 2 respectively) if we deﬁne the genus and Euler characteristic for these surfaces in the analogous way. Thus, the genus of a Riemann surface already determines the conformal type of the universal covering. Further, we have thus obtained a complete list of the topological types of compact Riemann surfaces, since the topological type is already determined by the genus. We recall that in the appendix to Sec. 2.4, we obtained the topological classiﬁcation directly by topological methods. For this, it was necessary to triangulate the surface, i.e. decompose it into triangles (see 2.3.A), and then dissect the surface to get an abstract polygon from which the surface could be reconstructed by boundary identiﬁcations. This polygon then was brought to a normal form as in Theorem 2.4.2 - for this, the steps 1), 2), 4) and 5) of the proof of Theorem 2.4.2 suﬃced. Corollary 2.5.5 Suppose given a decomposition of the Riemann surface Σ into polygons (i.e. Σ is represented as the union of closed polygons with disjoint interiors and boundaries consisting of ﬁnitely many geodesic arcs) and suppose the number of polygons occuring is f , the number of sides k, and the number of vertices e. Then χ(Σ) = f − k + e.

(2.5.7)

Proof. This again follows from the Gauss-Bonnet formula. If we sum (2.5.3) over all the polygons of the decomposition, then the ﬁrst summand on the right-hand side contributes the sum of all the interior angles, i.e. 2πe; the summand 2π occurs f times, i.e. contributes 2πf , and each edge occurs twice, hence the contribution from the edges in −2πk. By (2.5.5), the left side of the sum is 2πχ. (The argument is the same if the universal covering is S 2 or C.)

The relation (2.5.7) is valid even if the sides of the polygons of the decomposition are not necessarily geodesics; it is easy and elementary to reduce the general case to the case considered above. But the general case also follows

2.5 The Theorems of Gauss-Bonnet and Riemann-Hurwitz

61

from the general Gauss-Bonnet formula, in which there will be additional boundary integrals in general; however, these additional terms cancel on addition since every edge appears twice in the sum with opposite orientations. Finally, the topological invariance of f − k + e can also be proved directly by a combinatorial argument. The principle of the proof presented above, which consists in representing a topological quantity as an integral of an analytically deﬁned expression (here the curvature), so that the invariant nature of the topological quantity on the one hand and the integrality of the integral on the other follow simultaneously, is of considerable importance in mathematics. A higher dimensional generalisation leads to Chern classes. And in the principal index theorems of mathematics (e.g. that of Atiyah and Singer) one proves likewise the equality of two expressions, one of which is deﬁned topologically and the other analytically. We shall now prove the Gauss-Bonnet theorem for compact surfaces without boundary with respect to an arbitrary metric. Corollary 2.5.6 Let Σ be a compact Riemann surface without boundary, of genus p 9 , with a metric ρ2 (z)dzdz of curvature Kρ . Then i Kρ ρ2 (z) dz dz = 2π (2 − 2p). 2 Σ Proof. We put another metric λ2 dzdz on Σ, of constant curvature K. For this second metric, we know by Corollary 2.5.3 that i Kλ2 dz dz = 2π (2 − 2p). 2 Σ Now the quotient ρ2 (z)/λ2 (z) is invariant under coordinate transformations, i.e. behaves like a function, since by Def. 2.3.1 both ρ2 (z) and λ2 (z) get multiplied by the same factor. We compute now i 2 i dz dz − Kρ ρ2 dz dzv Kλ 2 2 i i ∂2 ∂2 log λ dz dz + 4 log ρ dz dz = −4 ∂z∂z 2 ∂z∂z 2 ρ i ∂2 log dz dz =4 ∂z∂z λ 2 which vanishes by Gauss’ Divergence Theorem (note that ρ and λ are everywhere positive), so that our assertion follows.

9

Since we shall prove the Uniformization Theorem only in § 4.4 below, we should strictly assume at this stage that Σ is diﬀeomorphic to S 2 or a torus, or is a quotient of H. It follows from the Uniformization Theorem that this assumption is automatically satisﬁed.

62

2 Diﬀerential Geometry of Riemann Surfaces

It is worthwhile to reﬂect brieﬂy once again on the above statement and its proof. We consider an arbitrary metric on a compact surface, and construct from it a quantity, namely the curvature integral, which now no longer depends on the particular metric, but is determined by the topological type of the surface. Thus, to compute the Euler characteristic of the surface, we may choose an arbitrary metric. For the proof of Corollary 2.5.6, we had only to observe that, for any two metrics, the integrands diﬀer only by a divergence expression, which integrates to zero. In the terminology introduced later on in Chapter 5, if K is the curvature of the metric 2 dzdz, Kρ ρ2 dz ∧ dz = −4

∂2 log ρ dz ∧ dz ∂z∂z

deﬁnes a cohomology class of Σ which does not depend on the special choice of (namely the so-called ﬁrst Chern class of Σ up to a factor), cf. § 5.6. We next consider a (non-constant) holomorphic map f : Σ1 → Σ2 between compact Riemann surfaces. According to the local representation theorems for holomorphic functions, we can ﬁnd for each p ∈ Σ1 local charts around p and f (p) in which (assuming without loss of generality that p = 0 = f (p)) f can be written as (2.5.8) f = zn. (First, we can write ζ = f (w) = k≥n ak wk with n > 0 and an = 0. Since a non-vanishing function has a logarithm locally, we have ζ = wn g(w)n , with g holomorphic and g(0) = 0. Set z = wg(w).) Deﬁnition 2.5.2 p is called a branch point or ramiﬁcation point of f if n > 1 in (2.5.8). We call n − 1 the order of ramiﬁcation of f at p (in symbols: vf (p) := n − 1). Since Σ1 is compact, there are only ﬁnitely many points of ramiﬁcation. Lemma 2.5.1 Let f : Σ1 → Σ2 be a non-constant holomorphic map of compact Riemann surfaces. Then there exists m ∈ N such that ( vf (p) + 1 ) = m p∈f −1 (q)

for all q ∈ Σ2 . Thus f takes every value in Σ2 precisely m times, multiplicities being taken into account. Deﬁnition 2.5.3 We call m the (mapping) degree of f . If f is constant, we set m = 0. The proof of Lemma 2.5.1 follows by a simple open-and-closed argument.

We now prove the Riemann-Hurwitz formula:

2.5 The Theorems of Gauss-Bonnet and Riemann-Hurwitz

63

Theorem 2.5.2 Let f : Σ1 → Σ2 be a non-constant holomorphic map of degree m between compact Riemann surfaces of genera g1 and g2 respectively. Let vf := p∈Σ1 vf (p) be the total order of ramiﬁcation of f . Then 2 − 2g1 = m (2 − 2g2 ) − vf . Proof.

(2.5.9)

Let λ2 dwdw be a metric on Σ2 . Then λ2 (w(z))

∂w ∂w dz dz ∂z ∂z

(where f = w(z) in local coordinates) deﬁnes a metric on Σ1 outside the ramiﬁcation points of f , and f is a local isometry with respect to these two metrics). Let p1 , · · · , pk be the ramiﬁcation points. Suppose f is given in a local chart near pj by w = z vf , and let Bj (r) be a disc of radius r around pj in this chart. Since f is a local isometry, we will have, as r → 0, i 1 ∂2 1 2 log λ (w dz dz 4 w ) − z z 2π Σ1 \ k Bj (r) ∂z∂z 2 j=1 i ∂2 m (log λ) dw dw 4 =− 2π Σ1 \ Bj (r) ∂w∂w 2 → m (2 − 2g2 )

by Cor. 2.5.6.

On the other hand, as r → 0, i ∂2 1 (log λ) dz dz → 2 − 2g1 4 − 2π Σ1 \ Bj (r) ∂z∂z 2 (λ2 (w(z)) dzdz transforms like a metric except for a factor which is the square of the absolute value of a non-vanishing holomorphic function; when we form ∂2 ∂z∂z log λ, this factor plays no role, hence Cor. 2.5.6 provides the value of the limit of the integral). i 1 ∂2 1 2 log w dz dz 4 − z 2π Σ1 \ Bj (r) ∂z∂z 2 1 1 ∂ log wz2 r dϕ = 2π ∂Bj (r) ∂r 1 (nj − 1), since w = z nj in Bj (r), = 2 j 1

and similarly for the integral involving wz2 . These formulæ imply (2.5.9).

We collect some consequences of (2.5.9) in the following:

64

2 Diﬀerential Geometry of Riemann Surfaces

Corollary 2.5.7 (i) vf is always even; (ii) g1 ≥ g2 ; (iii) g2 = 0, f unramiﬁed ⇒ g1 = 0, m = 1; (iv) g2 = 1, f unramiﬁed ⇒ g1 = 1 (m arbitrary); (v) g2 > 1, f unramiﬁed ⇒ g1 = g2 and m = 1 or g1 > g2 , m > 1; (vi) g2 = g1 = 1 ⇒ f unramiﬁed; (vii) g2 = g1 > 1 ⇒ m = 1, f unramiﬁed.

Exercises for § 2.5 1) 2)

State and prove the Gauss-Bonnet formula for spherical polygons. We have deﬁned the degree of a holomorphic map between compact Riemann surfaces in Def. 2.5.3. However, a degree can also be deﬁned for a continuous map between compact surfaces, and such a deﬁnition can be found in most textbooks on algebraic topology. For a diﬀerentiable map g : Σ1 → Σ2 between compact Riemann surfaces, the degree d(g) is characterized by the following property: If λ2 (g)dgdg is a metric on Σ2 , and if ϕ : Σ2 → R is integrable, then i ϕ(g(z)) (gz g z − g z gz ) λ2 (g(z)) dz dz 2 Σ1 i ϕ(g) λ2 (g) dg dg = d(g) 2 Σ2 Show that the degree of a holomorphic map as deﬁned in Def. 2.5.3 satisﬁes this property.

2.6 A General Schwarz Lemma We begin with the Ahlfors-Schwarz lemma: Theorem 2.6.1 hyperbolic metric λ2 (z) dzdz :=

4 (1 − |z|2 )

2

dz dz

(cf. Lemma 2.3.6).

Let Σ be a Riemann surface with a metric ρ2 (w) dw dw whose curvature K satisﬁes K ≤ −κ < 0

(2.6.1)

2.6 A General Schwarz Lemma

65

(for some positive constant κ). Then, for any holomorphic map f : D → Σ, we have 1 ∂f etc.). (2.6.2) (fz := ρ2 (f (z)) fz f z ≤ λ2 (z) κ ∂z Proof. We recall the curvature formulæ −

4 ∂2 log λ = −1 λ2 ∂z∂z

(2.6.3)

and

1 4 ∂2 log ρ2 (f (z))fz f z 2 ≤ −κ 2 ρ (f (z))fz f z ∂z∂z at all points where fz = 0, by Lemma 2.3.7 and (2.6.1). We put −

u :=

(2.6.4)

1 log ρ2 (f (z))fz f z 2

so that

∂2 u ≥ κe2u ∂z∂z wherever u is deﬁned, i.e. fz = 0. For any 0 < R < 1, we also put 4

vR (z) := log

2R 1 2

κ (R2 − |z|2 )

,

(2.6.5)

|z| < R

and compute ∂2 vR = κe2vR . ∂z∂z From (2.6.5) and (2.6.6) we get 4

4

∂2 (u − vR ) ≥ κ e2u − e2vR ∂z∂z

(2.6.6)

(2.6.7)

wherever fz = 0. Let S := {|z| < R : u(z) > vR (z)}. Since u tends to −∞ as fz tends to zero, S cannot contain any zeros of f (z). Hence (2.6.7) is valid in S. Therefore, by the maximum principle, u − vR cannot attain an interior maximum in S. But the boundary of S (in C) is contained in |z| < R, since vR (z) → −∞ as |z| → R. Hence u − vR = 0 on ∂S, by continuity. This means that the maximum of u − vR , which has to be attained in ∂S, is zero, i.e. that S is empty. We conclude: u(z) ≤ vR (z), |z| < R, and letting R tend to 1, we get u(z) ≤ log which is equivalent to (2.6.2).

2 1 2

κ (1 − |z|2 )

66

2 Diﬀerential Geometry of Riemann Surfaces

Theorem 2.6.1, of which Theorems 2.3.1 and 2.3.2 are special cases, shows the importance of negatively curved metrics on Riemann surfaces. In this section, we shall exploit the strong connection between the conformal structure of a Riemann surface and the curvature properties of the metrics which can be put on it. Often one can construct a metric with suitable properties on a Riemann surface and deduce consequences for the holomorphic structure of the surface. Such techniques are of even greater importance in higher-dimensional complex geometry. And, although it is not necessary for our present applications, we also want to introduce a concept that abstracts the assertion of the Ahlfors-Schwarz lemma, because it again illustrates ideas that are useful in the higher dimensional case. Thus, let Σ be a Riemann surface. For any p, q ∈ Σ, we deﬁne dH (p, q) := inf

n

d(zi , wi ) : n ∈ N, p0 , p1 , · · · , pn ∈ Σ, p0 = p, pn = q,

i=1

fi : D → Σ holomorphic,

fi (zi ) = pi−1 , fi (wi ) = pi .

Here, d(· , ·) is the distance on D deﬁned by the hyperbolic metric. It is easily seen that dH satisﬁes the triangle inequality dH (p, q) ≤ dH (p, r) + dH (r, q),

p, q, r ∈ Σ,

and is symmetric and non-negative. Deﬁnition 2.6.1 Σ is said to be hyperbolic if dH deﬁnes a distance function on Σ, i.e. if p = q. dH (p, q) > 0 Important Note. This usage of the term “hyperbolic”10 is obviously diﬀerent from its usage in other parts of this book. It has been adopted here because the same deﬁnition is used in the higher-dimensional case. This usage is restricted to the present section; in all other parts of the book “hyperbolic” has a diﬀerent meaning. Remark. dH is continuous in q for ﬁxed p and if Σ is hyperbolic the topology on Σ deﬁned by the distance function coincides with the original one. If dH is complete, then bounded sets are relatively compact. We leave it as an exercise to the reader to check these assertions. Corollary 2.6.1 Suppose Σ carries a metric ρ2 (w) dwdw with curvature K bounded above by a negative constant. Then Σ is hyperbolic (in the sense of Deﬁnition 2.6.1.). 10

In the literature, it is sometimes called “Kobayashi-hyperbolic”.

2.6 A General Schwarz Lemma

67

Proof. Let p, q ∈ Σ, and let f : D → Σ be a holomorphic map with f (z1 ) = p, f (z2 ) = q for some z1 , z2 ∈ D. Let Γ be the geodesic arc in D joining z1 to z2 . Then 4 d(z1 , z2 ) = λ(z) |dz| (where λ2 (z) = ) (1 − |z|2 )2 γ ρ(f (z))|fz | |dz| by (2.6.2) ≥C γ ρ(w) |dw| =C f (γ)

≥ Cdρ (p, q) where C > 0 is a constant and dρ denotes the distance on Σ deﬁned by the

metric ρ2 (w) dwdw. The corollary follows easily. From the proof of Corollary 2.6.1, we see that, under the assumptions of Theorem 2.6.1, any holomorphic map f : D → Σ is distance-decreasing (up to a ﬁxed factor determined by the curvature of the metric on Σ). On the other hand, this is essentially the content of Deﬁnition 2.6.1. Examples. 1) On the unit disc, dH coincides with the distance function deﬁned by the hyperbolic metric. This is again a consequence of the Schwarz lemma. 2) C is not hyperbolic. Namely, if p, q ∈ C, p = q, there exist holomorphic maps fn : D → C with fn (0) = p, fn ( n1 ) = q (n ∈ N). Hence dH (p, q) = 0. In view of Corollary 2.6.1, it follows that C cannot carry any metric with curvature bounded above by a negative constant. Thus the conformal structure puts restrictions on the possible metrics on a Riemann surface even in the non-compact case. Lemma 2.6.1 dH is non-increasing under holomorphic maps: If h : Σ1 → Σ2 is a holomorphic map, then dH (h(p), h(q)) ≤ dH (p, q) for all p, q ∈ Σ1 . In particular, dH is invariant under biholomorphic maps: dH (h(p), h(q)) = dH (p, q) for all p, q ∈ Σ1 if h is bijective and holomorphic. Proof. If fi : D → Σ1 is holomorphic with fi (zi ) = pi−1 and fi (wi ) = pi , then h ◦ fi : D → Σ is holomorphic with h ◦ fi (zi ) = h(pi−1 ) and h ◦ fi (wi ) = h(pi ). The lemma follows easily from this.

its universal covering. Lemma 2.6.2 Let Σ be a Riemann surface and Σ

is. Then Σ is hyperbolic if and only if Σ

68

2 Diﬀerential Geometry of Riemann Surfaces

→ Σ be the covering Proof. First, suppose Σ is hyperbolic. Let π : Σ

projection, and p, q ∈ Σ, p = q. Then, by Lemma 2.6.1, dH (p, q) ≥ dH (π(p), π(q)) > 0

if π(p) = π(q).

(2.6.8)

To handle the case π(p) = π(q), we make a geometric observation. Let fi , zi , wi be as in the deﬁnition of dH (p, q), and ci the geodesic in D from zi to wi . Then n

fi (ci ) γ := i=1

is a curve joining p to q, and dH (p, r) ≤

n

d(zi , wi )

i=1

for every r ∈ γ. Thus, if dH (p, q) = 0 for p = q, we can ﬁnd a sequence γν , ν ∈ N, of such curves such that the sums of the lengths of the corresponding ci tends to zero. And for every point r which is a limit point of points on the γν , we would have dH (p, r) ≤ dH (p, q) = 0. In particular, on every suﬃciently small circle around p, there would be an r with dH (p, r) = 0. But in our situation, in view of (2.6.9) and the fact that the ﬁbres of π are discrete, this is impossible.

is hyperbolic. Let p, q ∈ Σ, p = q. Then, Now suppose conversely that Σ arguing as above, one shows that, for any p ∈ π −1 (p) p, q ) : q ∈ π −1 (q) > 0 inf dH (

using the fact that π −1 (q) is a closed set containing q . Moreover, this inﬁmum is independent of the choice of p ∈ π −1 (p) since covering transformations act transivitely on the ﬁbres of π (Corollary 1.3.3), and are isometries with respect to dH (Lemma 2.6.1) since they are biholomorphic (cf. the end of § 2.1). If now πi , fi , zi , wi are as in the deﬁnition of dH (p, q), we know by

with gi (zi ) = Theorem 1.3.1 that there exist holomorphic maps gi : D → Σ gi−1 (wi−1 ) for i > 1 (g1 (z0 ) = p 0 ∈ π −1 (p) arbitrary). Consequently p, q ) : p ∈ π −1 (p), q ∈ π −1 (q) . dH (p, q) ≥ inf dH (

Combined with the earlier observations, this proves that Σ is hyperbolic.

Theorem 2.6.2 Let S, Σ be Riemann surfaces, and z0 ∈ S. Assume that Σ is hyperbolic in the sense of Deﬁnition 2.6.1 and complete with respect to dH . Then any bounded holomorphic map f : S\{z0 } → Σ extends to a holomorphic map f : S → Σ.

2.6 A General Schwarz Lemma

69

Proof. The problem is local near z0 , hence it suﬃces to consider the case

of when S is the unit disk D. Then f lifts to a holomorphic map f : D → Σ

is the universal coverings of D\{0} and Σ (cf. § 2.3). By Lemma (2.6.2), Σ also hyperbolic . As always, we equip D with its standard hyperbolic metric and induced distance d. Then, by Lemma (2.6.1), dH (f (w1 ), f (w2 )) ≤ d(w1 , w2 ),

w1 , w2 ∈ D.

Hence we also have for f : dH (f (z1 ), f (z2 )) ≤ d(z1 , z2 ),

z1 , z2 ∈ D\{0},

(2.6.9)

where d now denotes the distance on D\{0} induced by the hyperbolic metric 1 |z|2 (log |z|2 )2

dz dz

(cf. § 2.3). Let now Sδ := {|z| = δ} for 0 < δ < 1. The length of Sδ in the hyperbolic metric of D\{0} tends to zero as δ tends to zero, hence the diameter of f (Sδ ) with respect to dH tends to zero by (2.6.10). Since f is bounded, and Σ is complete, there exists for every sequence δn → 0 a subsequence δn such that f (Sδn ) converges to a point in Σ. We must show that this limit point is independent of the choice of (δn ) and (δn ). Suppose this is not the case. Then we argue as follows. Let p0 be the limit point for some sequence f (Sδn ). Choose a holomorphic coordinate h : D → Σ with h(0) = p0 , and choose ε > 0 so small that { p ∈ Σ : dH (p, p0 ) < 5ε } ⊂ h(D). Now choose δ0 > 0 such that diam(f (Sδ )) < ε

(2.6.10)

for 0 < δ ≤ δ0 . Since we are assuming that the limit point of the f (Sδ ) is not unique, we can ﬁnd 0 < δ1 < δ2 < δ3 < δ0 such that, if Kη := {p ∈ Σ : dH (p, p0 ) < η} , then (i) f (Sδ2 ) ⊂ K2ε , (ii) f (Sδ ) ⊂ K3ε for δ1 < δ < δ3 , (iii) f (Sδ1 ) and f (Sδ3 ) are not contained in K2ε .

70

2 Diﬀerential Geometry of Riemann Surfaces

We now identify D and h(D) via h; in particular, we regard f | {δ1 ≤ |z| ≤ δ3 } as a holomorphic function. Choose a point p1 ∈ f (Sδ2 ) ⊂ K2ε . By (2.6.11) and (iii), p1 does not lie on the curves f (Sδ1 ) and f (Sδ3 ). On the other hand, p1 is attained by f at least in {δ1 ≤ |z| ≤ δ3 }, namely on |z| = δ2 . Hence f (z) f (z) dz − dz = 0. (2.6.11) Sδ3 f (z) − p1 Sδ1 f (z) − p1 But f (Sδ1 ) and f (Sδ3 ) are contained in simply connected regions not containd log(f (z) − p1 ). ing p1 . Hence the integrand in (2.6.12) can be written as dz Thus both integrals in (2.6.12) must vanish. This contradiction shows that the limit point of f (Sδ ) as δ → 0 is unique. Hence f extends to a continuous map f : D → Σ. The proof can now be completed by an application of the removability of isolated singularities of bounded harmonic functions, which is recalled in the lemma below.

Lemma 2.6.3 Let f : D\{0} → R be a bounded harmonic function. Then f can be extended to a harmonic function on D. Proof. Let D = { z ∈ C : |z| < 12 } and let h : D → R be harmonic with boundary values f|∂D (the existence of h is guaranteed by the Poisson integral formula). For λ ∈ R, let hλ (z) = h(z) + λ log 2|z|. Then hλ is a harmonic function on D \{0}, with hλ |∂D = f|∂D ; also for λ < 0 (resp. λ > 0), hλ (z) → +∞ (resp. −∞) as z → 0. Since f is bounded, it follows that hλ − f , which is a harmonic function on D \{0}, has boundary values 0 on ∂D and +∞ at 0, for all λ < 0. Hence hλ − f ≥ 0 on D for all λ < 0, by the maximum principle. Similarly hλ − f ≤ 0 on D for all λ > 0. Letting λ → 0, we conclude f ≡ h in D \{0}, hence f extends through 0.

Theorem 2.6.3 If Σ is hyperbolic, then any holomorphic map f : C → Σ is constant. Proof. As already observed, dH ≡ 0 on C. Hence the theorem follows from the non-increasing property of dH under holomorphic maps (Lemma 2.6.1).

Corollary 2.6.2 An entire holomorphic function omitting two values is constant.

2.6 A General Schwarz Lemma

71

Proof. Let f : C → C be holomorphic with f (z) = a, b for all z. To conclude from Theorem 2.6.3 that f is constant, we must show that C\{a, b} is hyperbolic. For that purpose, we construct a metric on C\{a, b} with curvature bounded above by a negative constant: the metric µ

µ

µ

µ

|z − a| |z − b| ( |z − a| + 1 ) ( |z − b| + 1 ) dz dz has curvature −

µ2 2

µ

( |z − b| + 1 ) µ

+ ( |z − a| + 1 )

−3

−3

2−µ

|z − a|

|z − b|

2−µ

µ

( |z − a| + 1 ) −1 µ , ( |z − b| + 1 )

−1

which is bounded above by a negative constant if 0 < µ < 25 . Hence the result follows from Corollary 2.6.1.

To prove the “big” Picard theorem, we need a slight extension of Theorem 2.6.2. Theorem 2.6.4 Let Σ be a compact surface, and Σ := Σ\{w1 , · · · wk } for a ﬁnite number of points in Σ. Assume that Σ is hyperbolic. Let S be a Riemann surface, and z0 ∈ S. Then any holomorphic map f : S\{z0 } → Σ extends to a holomorphic map f : S → Σ. Proof. As in Theorem 2.6.2, we may assume S = D, z0 = 0. Now we observe that, in Theorem 2.5.2, the boundedness of f and the completeness of dH on Σ were only used to ensure that, for some sequence zn → 0, f (zn ) converged in Σ. In the present situation, the set of limiting values of f (z) as z → 0, being the intersection of the closures in Σ of the f (0 < |z| < r), 0 < r < 1, is a connected compact set, hence must reduce to one of the wi if contained entirely in Σ\Σ. Hence f extends continuously to D in any case, and the rest of the argument is the same as in Theorem 2.6.2.

The “big” Picard theorem follows: Corollary 2.6.3 Let f (z) be holomorphic in the punctured disc 0 < |z| < R, and have an essential singularity at z = 0. Then there is at the most one value a for which f (z) = a has only ﬁnitely many solutions in 0 < |z| < R. Proof. If f (z) = a has only ﬁnitely many solutions in 0 < |z| < R, then there is also an r, 0 < r ≤ R, such that f (z) = a has no solutions at all in 0 < |z| < r. Hence it suﬃces to prove that if f (z) is holomorphic in 0 < |z| < r (r > 0) and omits two ﬁnite values a and b, then it has a removable singularity or a pole at 0 (in other words, that it can be extended to a meromorphic function on |z| < r. Hence the result follows from Theorem 2.6.4, with Σ = S 2 and Σ = C\{a, b} (which was shown to be hyperbolic in the proof of Corollary 2.6.2).

72

2 Diﬀerential Geometry of Riemann Surfaces

Exercises for § 2.6 1)

2)

∗

3)

Which of the following Riemann surfaces are hyperbolic in the sense of Def. 2.6.1? S 2 , a torus T , T \{z0 } for some z0 ∈ T , an annulus {r1 < |z| < r2 }, C\{0}. Let S, Σ be Riemann surfaces, and suppose Σ is hyperbolic. Show that the family of all holomorphic maps f : S → Σ which are uniformly bounded is normal. (One needs to use the fact that S as a Riemann surface has countable topology.) If Σ is complete w.r.t. the hyperbolic distance dH , then the family of all holomorphic maps f : S → Σ whether bounded or not - is normal. Write down a ˘complete metric on C\{a, b} with curvature bounded from above by a negative constant. (Hint: In punctured neighbourhoods of a, b, ∞, add a suitable multiple of the hyperbolic metric on the punctured disk D\{0}, multiplied by a cut-oﬀ function. If you are familiar with elliptic curves, you can also use the modular function λ : H → C\{0, 1}, where H is the upper half plane, to get a metric with constant curvature −1 on C\{0, 1}.) Using the result of 2), conclude Montel’s theorem that the family of all holomorphic functions f : Ω → C that omit two values a, b is normal (Ω ⊂ C).

2.7 Conformal Structures on Tori We begin by recalling some facts from [A1] (p. 257). Let f be a meromorphic function on C. An ω in C is said to be a period of f if f (z + ω) = f (z) for all z ∈ C. (2.7.1) The periods of f form a module M over Z (in fact an additive subgroup of C). If f is non-constant, then M is discrete. The possible discrete subgroups of C are M = {0}, M = {nω : n ∈ Z}, M = {n1 ω1 + n2 ω2 : n1 , n2 ∈ Z},

ω2 ∈ R. ω1

Here the third case is the interesting one. A module of that form is also called a lattice. As we have already seen, such a module deﬁnes a torus T = TM if we identify the points z and z + n1 ω1 + n2 ω2 ; let π : C → T be as before the projection. The parallelogram in C deﬁned by ω1 and ω2 (with vertices 0, ω1 , ω2 , ω1 + ω2 ) is a fundamental domain for T .

2.7 Conformal Structures on Tori

73

By (2.7.1), f becomes a meromorphic function on T . If (ω1 , ω2 ) is another basis for the same module, the change of basis is described by ab ω 2 ω2 ω2 ω2 = cd ω1 ω1 ω1 ω1 ab with belonging to cd αβ GL(2, Z) := : α, β, γ, δ ∈ Z, αδ − βγ = ±1 . γ δ Its subgroup SL(2, Z) consisting of matrices of determinant +1 is called the modular group; and the elements of SL(2, Z) are called unimodular transformations. 10 As in § 2.3, we deﬁne PSL(2, Z) := SL(2, Z)/ ± . As a subgroup of 01 PSL(2, R), it acts by isometries on H. Theorem 2.7.1 There is a basis (ω1 , ω2 ) for M such that, if τ := have (i) Im τ > 0, (ii) − 12 < Re τ ≤ 12 , (iii) |τ | ≥ 1, (iv) Re τ ≥ 0 if |τ | = 1.

ω2 ω1 ,

we

τ is uniquely determined by these conditions, and the number of such bases for a given module is 2, 4 or 6. Thus τ lies in the region sketched in Fig. 2.7.1. Theorem 2.7.1 can also be interpreted as saying that the interior of the region decribed by (i)–(iv) is a fundamental polygon for the action of PSL(2, Z) on the upper half-plane {Im τ > 0}, as in § 2.4. That there are in general two such bases for a given M is simply because we can replace (ω1 , ω2 ) by (−ω1 , −ω2 ). If τ = i, then there are 4 bases as in the theorem; namely we can also replace (ω1 , ω2 ) by (iω1 , iω2 ). Finally we πi get 6 bases when τ = e 3 , because we can in this case replace (ω1 , ω2 ) by πi (τ ω1 , τ ω2 ) (hence also by (τ 2 ω1 , τ 2 ω2 )). We remark that τ = i and τ = e 3 are precisely the ﬁxed points of (non-trivial) elements of PSL(2, Z) (in the closure of the fundamental domain). The normalisation in Theorem 2.7.1 can also be interpreted as follows: we choose ω1 = 1, and then ω2 lies in the region described by the inequalities (i)–(iv). In the sequel, we may always make this normalisation, since multiplication of the basis of the module by a ﬁxed factor always leads to a conformally equivalent torus, and we are classifying the diﬀerent conformal equivalence classes.

74

2 Diﬀerential Geometry of Riemann Surfaces

i

-1

- __ 1 2

0

1 __ 2

1

Fig. 2.7.1.

Let us also mention that by the Uniformization Theorem, every Riemann surface which is homeomorphic to a torus is in fact conformally equivalent to a quotient of C, and hence of the form considered here. As follows from Corollary 1.3.3, and as was explained in § 1.3, π1 (T ) = Z⊕Z; indeed, the group of covering transformations of π : C → T is Z⊕Z, generated by the maps z → z + ω1 and z → z + ω2 . Thus the fundamental group of T is canonically isomorphic to the module {n1 ω1 + n2 ω2 : n1 , n2 ∈ Z}. Lemma 2.7.1 Let f1 , f2 : T → T be continuous maps between tori. Then f1 and f2 are homotopic if and only if the induced maps fi∗ : π1 (T ) → π1 (T )

(i = 1, 2)

coincide. Remark. We do not need to choose base points in this case, since the fundamental groups are abelian (so that all conjugations are the identity map). (Recall the discussion in §1.3.)

2.7 Conformal Structures on Tori

75

Proof of Lemma 2.7.1. “⇒” follows from Lemma 1.2.3, applied to a homotopy between f1 and f2 . “⇐”: We consider lifts f i : C → C of the fi (cf. Theorem 1.3.3). Let ω1 , ω2 be a basis of π1 (T ). Then we have by assumption f 1 (z + n1 ω1 + n2 ω2 ) − f 2 (z + n1 ω1 + n2 ω2 ) = f 1 (z) − f 2 (z) for all z ∈ C, n1 , n1 ∈ N.

(2.7.2)

It follows that F (z, s) := (1 − s)f 1 (z) + sf 2 (z) satisﬁes F (z + n1 ω1 + n2 ω2 , s) = f 1 (z + n1 ω1 + n2 ω2 ) + s(f 2 (z) − f 1 (z)). Hence each F (·, s) induces a map F (·, s) : T → T .

This provides the desired homotopy between f1 and f2 .

We now proceed to the classiﬁcation of conformal structures on tori. Actually, we shall only be giving a new interpretation of results already discussed. But it gives us an opportunity to illustrate in this simple case some concepts which we shall later have to discuss more precisely in the general case (which is much more diﬃcult). We shall make use of the normalisation discussed above, according to which the basis of a torus can be taken in the form 1, τ (τ as in Theorem 2.7.1). We denote the corresponding torus by T (τ ). Deﬁnition 2.7.1 The moduli space M1 is the space of equivalence classes of tori, two tori being regarded as equivalent if there exists a bijective conformal map between them. We say that a sequence of equivalence classes, represented by tori T n (n ∈ N) converges to the equivalence class of T if we ωn can ﬁnd bases (ω1n , ω2n ) for T n and (ω1 , ω1 ) for T such that ω2n converges to 1 ω2 ω1 . Deﬁnition 2.7.2 The Teichm¨ uller space T1 is the space of equivalence classes of pairs (T, (ω1 , ω2 )) where T is a torus, and (ω1 , ω2 ) is a basis of T (i.e. of the module M deﬁning T ); here, (T, (ω1 , ω2 )) and (T , (ω1 , ω2 )) are equivalent if there exists a bijective conformal map f : T → T with

f∗ (ωi ) = ωi .

(Here as before, (ω1 , ω2 ) has been canonically identiﬁed with a basis of π1 (T ), and similarly (ω1 , ω2 ), f∗ is the map of fundamental groups induced by f .) ωn 2 We say that (T n , (ω1n , ω2n )) converges to (T, (ω1 , ω2 )) if ω2n converges to ω ω1 . 1

76

2 Diﬀerential Geometry of Riemann Surfaces

We shall also call a pair (T, (ω1 , ω2 )) as above a marked torus. The space T1 can also be interpreted as follows. We choose a ﬁxed marked torus, e.g. T (i) with basis (1, i). We denote it by Ttop , since it serves us as the underlying topological model. By Lemma 2.7.2, (ω1 , ω2 ) deﬁnes a homotopy class α(ω1 , ω2 ) of maps T → Ttop . Namely, α(ω1 , ω2 ) is that homotopy class for which the induced map of fundamental groups sends (ω1 , ω2 ) to the given basis of Ttop (ω1 to 1 and ω2 to i in our case). The existence of a map T → Ttop which induces the above map on fundamental groups is clear: the R-linear map g : C → C with g(ω1 ) = 1, g(ω2 ) = i gives rise to one such map T → Ttop . Thus, instead of pairs (T, (ω1 , ω2 )), we can also consider pairs (T, α), where α is a homotopy class of maps T → Ttop which induces an isomorphism of fundamental groups (thus α should contain a homeomorphism). (T, α) and (T , α ) are now to be regarded as equivalent if the homotopy class (α )−1 ◦ α of maps T → T contains a conformal map. T1 is then the space of equivalence classes of such pairs. Theorem 2.7.2 T1 = H; M1 = H/PSL(2, Z). We have already seen that every torus is conformally equivalent to a T (τ ) with τ in the fundamental domain of PSL(2, Z) (Theorem 2.7.1). Similarly, every marked torus can be identiﬁed with an element of H; just normalise so that ω1 = 1. Thus we must show that two distinct elements of H/PSL(2, Z) (resp. H) are not conformally equivalent (resp. equivalent as marked tori). There are many ways of doing this. We shall follow a method which illustrates by a simple example some considerations of great importance in the sequel. Deﬁnition 2.7.3 A map h : T → T is said to be harmonic if its lift

h:C→C (cf. Theorem 1.3.3) is harmonic. Equivalently, the local expression of h in the charts induced by the projections C → T, C → T should be harmonic, i.e. have harmonic real and imaginary parts. Here, it is important to observe that the transition functions of such charts are linear, so that a change of charts in the target torus also preserves the harmonicity of the map; arbitrary changes of charts in the target do not preserve harmonicity. Lemma 2.7.2 Let T, T be tori, z0 ∈ T, z0 ∈ T . Then, in every homotopy class of maps T → T , there exists a harmonic map h; h is uniquely deterh : C → C of a harmonic map h mined by requiring that h(z0 ) = z0 . The lift

is aﬃne linear (as a map R2 → R2 ). If normalised by

h(0) = 0 (instead of h(z0 ) = z0 ), it is therefore linear. h is conformal if and only if

h (normalised by

h(0) = 0) is of the form z → λz, λ ∈ C.

2.7 Conformal Structures on Tori

77

Proof. Let (ω1 , ω2 ) be a basis of T , and ω1 , ω2 the images of ω1 and ω2 determined by the given homotopy class (cf. Lemma 2.7.2). Then the Rlinear map

h : C → C with

h(ωi ) = ωi induces a harmonic map h : T → T in the given homotopy class. Now suppose f is the lift of any map f : T → T in the given homotopy class. Then (2.7.3) f (z + n1 ω1 + n2 ω2 ) = f (z) + n1 ω1 + n2 ω2 , hence

∂ f

∂ f

(z + n1 ω1 + n2 ω2 ) = (z) ∂x ∂x

(2.7.4)

and similarly for ∂∂yf . Thus if f (hence f ) is harmonic, then so are ∂∂xf , ∂∂yf .

But ∂∂xf , ∂∂yf are then complex-valued harmonic functions on T by (2.7.4), hence constant by Lemma 2.2.1. Thus f is aﬃne linear. It also follows that the harmonic map in a given homotopy class is uniquely determined by the requirement h(z0 ) = z0 . Another way of seeing this is to observe that, by (2.7.3), the diﬀerence between the lifts of two homotopic harmonic maps becomes a harmonic function on T , and is therefore constant. The last assertion is clear.

The proof of Theorem 2.7.2 is now immediate: A conformal map is harmonic, hence has an aﬃne linear lift

h by Lemma 2.7.2; we may assume

h(0) = 0. We may also assume that the markings have been normalised by h(ω1 )). But if

h is conformal,

h(1) = 1 implies

h is the ω1 = 1 = ω1 (=

identity. It follows that T1 = H. To see that M1 = H/PSL(2, Z), we observe that we may now choose arbitrary markings. Thus we need only be able to say when a torus T (τ ) with basis (1, τ ) is equivalent to the torus T (τ ) for some choice of a marking on it. But this, by what has been proved above, is the case precisely when (1, τ ) is also a basis for T (τ ). The rest of the proof is straightforward and left to the reader as an exercise.

Exercises for § 2.7 1) 2)

Compute the area of a fundamental domain for PSL (2, Z). Determine a fundamental region for the congruence subgroup mod 2 of PSL (2, Z), namely

78

2 Diﬀerential Geometry of Riemann Surfaces

3)

ab cd

∈ SL (2, Z) :

ab cd

≡

10 mod 2 . 01

Show that it is a normal subgroup of PSL (2, Z) and compute the number of elements of the quotient group. Determine the set of conformal equivalence classes of annuli.

3 Harmonic Maps

3.1 Review: Banach and Hilbert Spaces. The Hilbert Space L2 This section will recall some basic results about the spaces mentioned in the title. Readers who already have a basic knowledge about these spaces may therefore skip the present section. Deﬁnition 3.1.1 A Banach space B is a real vector space equipped with a norm · which has the following properties: (i) (ii) (iii) (iv)

x > 0 for all x = 0 in B, αx = |α| x for all α ∈ R and x ∈ B, x + y ≤ x + y for all x, y ∈ B (Triangle Inequality), B is complete with respect to · (this means that every sequence (xn )n∈N ⊂ B which is a Cauchy sequence (∀ε > 0 ∃ N ∈ N ∀n, m ≥ N : xn − xm < ε) has a limit point x ∈ B (∀ε > 0 ∃ N ∈ N ∀n ≥ N : xn − x < ε)).

Remark.

A complex Banach space is deﬁned analogously.

Deﬁnition 3.1.2 A Hilbert space H is a real vector space which is equipped with a map (called “scalar product”) (· , ·) : H × H −→ R having the following properties: i) ii) iii) iv)

(x, y) = (y, x) (resp. (x, y) = (y, x)) for all x, y ∈ H; (λ1 x1 +λ2 x2 , y) = λ1 (x1 , y)+λ2 (x2 , y) for all λ1 , λ2 ∈ R and x1 , x2 , y ∈ H; (x, x) > 0 for all x = 0 in H; 1 H is complete with respect to the norm x := (x, x) 2 .

Lemma 3.1.1 In any Hilbert space, the following inequalities hold: Schwarz inequality: |(x, y)| ≤ x · y, Triangle inequality: x + y ≤ x + y,

(3.1.1) (3.1.2)

80

3 Harmonic Maps

Parallelogram law: x + y2 + x − y2 = 2 x2 + y2 .

(3.1.3)

The proofs are elementary: (3.1.1) follows from x+λy2 ≥ 0 with λ = − (x,y) y2 ; (3.1.2) follows from (3.1.1), and (3.1.3) by a direct computation.

Lemma 3.1.2 Every Hilbert space is a Banach space with respect to the 1 norm x = (x, x) 2 . Proof.

The triangle inequality is (3.1.2), and the other properties are clear.

Deﬁnition 3.1.3 Two elements x, y of a Hilbert space H are said to be orthogonal if (x, y) = 0. For a subspace F of H, the orthogonal complement of F is deﬁned as F ⊥ := {x ∈ H : (x, y) = 0 for all y ∈ F }. Theorem 3.1.1 Let F be a closed subspace of a Hilbert space H. Then every x ∈ H has a unique decomposition x = y + z, y ∈ F, z ∈ F ⊥ . Proof.

(3.1.4)

Let d := inf x − y, y∈F

and (yn )n∈N a minimizing sequence in F , so that x − yn → d.

(3.1.5)

From (3.1.3), we get 1 4 x − (ym + yn )2 + ym − yn 2 = 2 x − ym 2 + x − yn 2 . (3.1.6) 2 Since yn , ym lie in F , so does 12 (ym + yn ), it follows that (yn ) is a Cauchy sequence. Since H is complete, (yn ) has a limit y, which must lie in F since F is closed, and we have x − y = d. We put z = x − y; we shall show that z ∈ F ⊥ . For any y ∈ F and α ∈ R, we also have y + αy ∈ F , hence d2 ≤ x − y − αy 2 = (z − αy , z − αy ) = z2 − 2α(y , z) + α2 y 2 . Since z = d, it follows that |(y , z)| ≤

α 2 y 2

3.1 Review: Banach and Hilbert Spaces. The Hilbert Space L2

81

for all α > 0, hence (y , z) = 0 for all y ∈ F. Thus z ∈ F ⊥ . For uniqueness, assume that x = y +z = y +z with y, y ∈ F, z, z ∈ F ⊥ . Then y − y = z − z and hence (y − y , y − y ) = (y − y , z − z) = 0 since y − y ∈ F, z, z ∈ F ⊥ . Thus y = y and therefore also z = z . This shows the uniqueness of the decomposition.

Corollary 3.1.1 For every closed subspace F of a Hilbert space H, there exists a unique linear map π:H→F with π := sup x =0

π(x) = 1, x

π 2 = π (π is a projection), ker π = F ⊥ .

(3.1.7) (3.1.8) (3.1.9)

Proof. For x = y + z as in (3.1.4), we set π(x) = y. All the assertions are then immediate.

The above map π is referred to as the orthogonal projection on F . We shall now prove the Riesz representation theorem: Theorem 3.1.2 Let L be a bounded linear functional on a Hilbert space H (i.e. L : H → R is linear with L := supx =0 |Lx| x < ∞). Then there exists a unique y ∈ H with L(x) = (x, y)

for all x ∈ H.

(3.1.10)

Further, L = y. Proof.

(3.1.11)

Let N := ker L := {x ∈ H : L(x) = 0}.

If N = H, we can take y = 0. Thus let N = H. Since |Lx−Ly| ≤ L x−y, L is continuous. Therefore, N is closed as the preimage of the point 0 under a continuous map. Since N is also a linear subspace of H, Thm. 3.1.1 is applicable. Thus, there exists z ∈ H, z = 0, such that (x, z) = 0 for all x ∈ N . Then L(z) = 0, and we have for all x ∈ H L(x) L(x) z = L(x) − L(z) = 0, L x− L(z) L(z) so that x −

L(x) L(z) z

∈ N , hence

82

3 Harmonic Maps

x−

L(x) z, z = 0. L(z)

Thus

L(x) z2 ; L(z)

(x, z) = hence, if we set y :=

L(z) · z, z2

we will have L(x) = (x, y). If y1 , y2 ∈ H both have the property L(x) = (x, yi ), then (y1 − y2 , y1 ) = (y1 − y2 , y2 ), so that y1 − y2 2 = (y1 − y2 , y1 − y2 ) = 0 , proving uniqueness. Also, by the Schwarz inequality, L = sup x =0

|(x, y)| ≤ y; x

on the other hand, y2 = (y, y) = L(y) ≤ L · y. Hence ﬁnally y = L.

Deﬁnition 3.1.4 Let H be a Hilbert space. A sequence (xn )n∈N in H is said to converge weakly to x ∈ H if (xn , y) → (x, y)

for all y ∈ H.

Notation: xn x. Theorem 3.1.3 Every bounded sequence (xn )n∈N in a Hilbert space H contains a weakly convergent subsequence. Proof. Let xn ≤ M . To prove xn x, it suﬃces to show that (xn , y) → (x, y) for all y lying in the closure S of the subspace S spanned by the xn , since every y ∈ H can be decomposed by Theorem 3.1.1 as ⊥

y = y0 + y1 , y0 ∈ S, y1 ∈ S , and (xn , y1 ) = 0

for all n.

3.1 Review: Banach and Hilbert Spaces. The Hilbert Space L2

83

Now, for each ﬁxed m, the real numbers (xn , xm ) are bounded independently of n, and hence (xn , xm ) contains a convergent subsequence. Thus, by Cantor’s diagonal process, we can get a subsequence (xnk ) of (xn ) for which (xnk , xm ) converges (as k → ∞) for every m ∈ N. Then (xnk , y) converges for all y ∈ S. If y ∈ S, then |(xnj − xnk , y)| ≤ |(xnj , y − y )| + |(xnj − xnk , y )| + |(xnk , y − y)| ≤ 2 M y − y + |(xnj − xnk , y )| for all y ∈ S (or H). Given ε > 0, we can choose y ∈ S such that y − y < ε 4M , and then j and k so large that |(xnj − xnk , y )| <

ε . 2

It follows that the sequence (xnk , y) converges for all y ∈ S; set L(y) := lim (xnk , y). k→∞

Since |L(y)| ≤ M y, L is a bounded linear function on the Hilbert space S (with the induced scalar product) and Theorem 3.1.2 yields an x ∈ S such that (x, y) = L(y) for all y ∈ S. But then we also have L(y) = (x, y) = 0

⊥

for all y ∈ S .

Hence xnk x.

Corollary 3.1.2 If (xn ) converges weakly to x, then x ≤ lim inf xn . n→∞

Proof.

We have 0 ≤ (xn − x, xn − x) = (xn , xn ) − 2 (xn , x) + (x, x).

Since (xn , x) → (x, x) as n → ∞, it follows that 0 ≤ lim inf xn 2 − x2 . n→∞

Example.

We consider an orthonormal sequence (en )n∈N in H: 1 ,n=m := (en , em ) = δnm 0 , n = m

84

3 Harmonic Maps

(we suppose H is inﬁnite-dimensional). Then (en ) converges weakly to 0. Otherwise, we would have, after passing to a subsequence of (en ), an x ∈ H and an ε > 0 with for all n ∈ N. (3.1.12) |(x, en )| ≥ ε But (x, em ) em is the projection of x on the subspace spanned by em , since (em , x − (x, em )em ) = 0; note that (em , em ) = 1. Similarly, N (x, en ) en n=1

is the projection of x on the subspace spanned by e1 , . . . , eN . Hence

N

(x, en ) en ≤ x

for all N,

n=1

and (3.1.12) cannot hold. Thus en → 0 as asserted. Since en = 1 for all n, we see that one cannot expect equality to hold in Corollary 3.1.2. Further, (en ) does not converge strongly (i.e. in norm) to 0. Thus, in the context of compactness arguments, weak convergence is the appropriate analog of the usual convergence in ﬁnite dimensional spaces. Of course, for ﬁnite dimensional Hilbert spaces, weak and strong convergence coincide. Corollary 3.1.3 (Banach-Saks) Let (xn )n∈N be a bounded sequence in H: xn ≤ K for all n. Then there exists a subsequence (xnj ) of (xn ) and an x in H such that k 1 xn → x k j=1 j (w.r.t. the norm · ) as k → ∞. Proof. Let x be the weak limit of a subsequence (xni ) of (xn ) (Theorem 3.1.3), and yi := xni − x. Then yi 0, and yi ≤ K for some ﬁxed K . We now choose inductively for each j an ij such that |(yi , yij+1 )| ≤ 1j for all ≤ j. Then

k k−1 1 1 1 2 yij 2 ≤ 2 k K + 2 j· k j=1 k j j=1 2 K +2 ≤ k

which tends to 0 as k → ∞, and the assertion follows. For completeness, we shall ﬁnally prove: Lemma 3.1.3 Every weakly convergent sequence (xn ) in H is bounded.

3.1 Review: Banach and Hilbert Spaces. The Hilbert Space L2

85

Proof. It suﬃces to show that the bounded linear functionals Ln (y) := (xn , y) are uniformly bounded on {y ∈ H : y ≤ 1}. Again, because of the linearity of the Ln , we need only verify that they are uniformly bounded on some ball. We shall now prove the existence of such a ball by contradiction. Indeed, if no such ball exists, then we can ﬁnd a sequence Ki of closed balls Ki := {y : y − yi ≤ ri } with Ki+1 ⊂ Ki and ri → 0, and a subsequence (xni ) of (xn ), such that |Lni (y)| > i

for all y ∈ Ki .

(3.1.13)

Now (yi ) is a Cauchy sequence, and hence has a limit y0 ∈ H. Clearly ∞ Ki , y0 ∈ i=1

so that, by (3.1.13), |Lni (y0 )| > i

for all i ∈ N.

This is not possible since the weak convergence of (xni ) implies that Lni (y0 ) converges.

Let Ω be a bounded open set in Rd . Then L2 (Ω) := {u : Ω → R measurable, uL2 (Ω) := Ω u2 < ∞} is a Hilbert space with the scalar product u v, (u, v) := Ω

after identifying functions that diﬀer only on a set of measure 0, as usual. Thus, strictly speaking, L2 (Ω) is a space of equivalence classes of functions rather than of functions, two functions being equivalent if they agree on the complement of a set of measure zero. An element of such an equivalence class will be called a representative of (the class) u. Properties (i)–(iii) of Def. 3.1.2 are clear. The completeness property (iv) requires a proof for which we refer for example to [J4] and we do the same for Lemma 3.1.4 For every u ∈ L2 (Ω) and ε > 0, there exists a g ∈ C 0 (Ω) with u − gL2 (Ω) ≤ ε. Thus C 0 (Ω) is dense in L2 (Ω) with respect to the L2 -norm.

86

3 Harmonic Maps

We shall now show that even C ∞ (Ω) is dense in L2 (Ω). To do this, we make use of so-called smoothing functions, i.e. non-negative functions ∈ C0∞ (B(0, 1)) with = 1. Here, B(0, 1) := x ∈ Rd : |x| ≤ 1 , C0∞ (A) := f ∈ C ∞ (Rd ) : the closure of {x : f (x) = 0} is compact and contained in A . The typical example is

(x) := where c is so chosen that

c exp

1 |x|2 −1

0,

, |x| < 1 |x| ≥ 1

.

(x) = 1.

For u ∈ L2 (Ω) and h > 0, we deﬁne the molliﬁcation or smoothing uh of u by 1 x−y u(y) dy, (3.1.14) uh (x) := d h Rd h where u(y) is deﬁned as 0 if y ∈ Ω. The important property of uh is that uh ∈ C0∞ (Rd ). Lemma 3.1.5 If u ∈ C 0 (Ω), then uh → u as h → 0, uniformly on every Ω ⊂⊂ Ω (i.e. on every Ω whose closure is compact and contained in Ω). Proof.

We have 1 uh (x) = d h =

|x−y|≤h

|z|≤1

where z =

x−y h

u(y) dy

(z) u (x − hz) dz,

(3.1.15)

Thus, if Ω ⊂⊂ Ω and 2h < dist(Ω , ∂Ω), then (z) |u(x) − u(x − hz)| dz sup |u − uh | ≤ sup Ω x∈Ω |z|≤1 (since (z) dz = 1 )

(x−y) h .

≤ sup sup |u(x) − u(x − hz)|. x∈Ω |z|≤1

Since u is uniformly continuous on the compact set {x : dist(x, Ω ) ≤ h}, it follows that sup |u − uh | → 0 Ω

as h → 0.

3.1 Review: Banach and Hilbert Spaces. The Hilbert Space L2

87

Lemma 3.1.6 Let u ∈ L2 (Ω). Then u − uh L2 (Ω) → 0 as h → 0; here we have simply set u = 0 outside Ω. Proof.

By (3.1.12) and the Schwarz inequality, we have (z) dz · (z) |u(x − hz)|2 dz |uh (x)|2 ≤ |z|≤1 |z|≤1 = (z) |u(x − hz)|2 dz. |z|≤1

Choose a bounded open set Ω with Ω ⊂⊂ Ω . If 2h < dist(Ω, ∂Ω ), then |uh (x)|2 dx ≤ (z) |u(x − hz)|2 dz dx Ω Ω |z|≤1 = (z) |u(x − hz)|2 dx dz |z|≤1 Ω 2 ≤ |u(y)| dy. (3.1.16) Ω

Given ε > 0, we now choose w ∈ C 0 (Ω ) (cf. Lemma 3.1.4) such that u − wL2 (Ω ) < ε. By Lemma 3.1.5, we have w − wh L2 (Ω) < ε if h is suﬃciently small. Hence, using (3.1.16) for u − w, we get u − uh L2 (Ω) ≤ u − wL2 (Ω) + w − wh L2 (Ω) + uh − wh L2 (Ω) ≤ 2ε + u − wL2 (Ω ) < 3ε.

In the same way as L2 (Ω) is a Hilbert space, for 1 ≤ p < ∞, the spaces Lp (Ω) := u : Ω → R measurable; p1 p |u(x)| dx < ∞ up := uLp (Ω) := Ω

as well as L∞ (Ω) :=

u : Ω → R measurable;

uL∞ (Ω) := ess supΩ |u(x)| < ∞

are Banach spaces, provided we identify functions that diﬀer only on a set of measure 0. This identiﬁcation is needed for property (i) of Def. 3.1.1. Again, we refer to [J4] or to any other textbook on advanced analysis for details.

88

3 Harmonic Maps

We summarize the relevant results about the Lp -spaces in Lemma 3.1.7 Lp is complete with respect to · p , hence a Banach space, for 1 ≤ p ≤ ∞. For 1 ≤ p < ∞ , C 0 (Ω) is dense in Lp (Ω), i.e. for every u ∈ Lp (Ω) and ε > 0, there exists a w ∈ C 0 (Ω) with u − wp < ε. H¨ older’s inequality: if u ∈ Lp (Ω), v ∈ Lq (Ω) and u v ≤ up · vq .

(3.1.17) 1 p

+

1 q

= 1, then (3.1.18)

Ω

(3.1.18) follows from Young’s inequality: ab ≤ if a, b ≥ 0, p, q > 1 and To see this, we set

1 p

+

1 q

bq ap + p q

(3.1.19)

= 1.

A := up , B := vq ; without loss of generality, suppose AB = 0. |v(x)| Then, with a := |u(x)| A , b := B , we get from (3.1.19) 1 Ap 1 Bq |u(x) v(x)| ≤ + = 1, AB p Ap q Bq which is (3.1.18). In the sequel, we shall also need the spaces C k (Ω) := { f : Ω → R : f is k times continuously diﬀerentiable } for k = 0, 1, 2, . . . (for k = 0, C 0 (Ω) is the space of continuous functions on Ω), and the corresponding norms f C k (Ω) :=

k

sup Dj f (x) ,

j=1 x∈Ω

Dj standing for all the derivatives of f order j. The subspace of those f ∈ C k (Ω) with f C k (Ω) < ∞ then forms a Banach spaceas the reader surely will know. Finally, we put C0k (Ω) := f∈ C k (Ω) : suppf := closure of {x ∈ Ω : f (x) = 0} is a compact subset of Ω . Here, the closure is taken in Rd

3.1 Review: Banach and Hilbert Spaces. The Hilbert Space L2

89

We shall now prove the Implicit Function Theorem in Banach spaces which will be used in Sect. 4.2. (For our purposes, it would in fact suﬃce to prove the theorem in the case of Hilbert spaces.) Let us ﬁrst introduce the necessary concepts. A map F of an open subset U of a Banach space B1 into a Banach space B2 is said to be (Fr´echet-) diﬀerentiable at x ∈ U if there exists a continuous linear map D F (x) : B1 → B2 such that F (x + ξ) − F (x) − D F (x)(ξ) B2 = o(ξ)

(3.1.20)

as ξ → 0 in B1 . Then D F (x) is called the derivative of F at x. Theorem 3.1.4 Let B0 , B1 , B2 be Banach spaces, and G a map of an open subset U of B1 × B0 into B2 . Suppose that (x0 , τ0 ) ∈ U has the following properties: (i) G(x0 , τ0 ) = 0, (ii) G is continuously diﬀerentiable in a neighbourhood of (x0 , τ0 ) (i.e. the derivative exists and depends continuously on (x, τ )), (iii) the partial derivative D1 G(x0 , τ0 ) (i.e. the derivative of the map G (· , τ0 ) : B1 → B2 at x0 ) is invertible, with bounded inverse. Then there exists a neighbourhood V of τ0 in B0 such that the equation G(x, τ ) = 0

(3.1.21)

has a solution x in U ∩ (B1 × τ ), for every τ ∈ V . The proof is based on the Banach Fixed Point Theorem, also called the Contraction Principle: Lemma 3.1.8 Let B be a Banach space, and T : B → B a map such that T x − T y ≤ q x − y

(3.1.22)

for all x, y ∈ B, with a q < 1. Then the equation Tx=x

(3.1.23)

has a unique solution in B. Proof.

Choose x0 ∈ B, and deﬁne iteratively xn = T xn−1 (= T n x0 ).

Then, for n ≥ m, xn − xm ≤ = ≤

n ν=m+1 n ν=m+1 n

xν − xν−1 ν−1 T x1 − T ν−1 x0 q ν−1 x1 − x0

ν=m+1

≤ qm

x1 − x0 , 1−q

(by (3.1.22))

90

3 Harmonic Maps

which tends to zero as n, m → ∞, since q < 1. Thus (xn ) is a Cauchy sequence. Since B is complete, (xn ) converges, say to x. Since T is continuous (by (3.1.22)), we have T x = lim T xn = lim xn+1 = x. The uniqueness of the ﬁxed point again follows from (3.1.22) since q < 1.

Remark. The above proof also works in the following situation: V is an open ball in B, with centre y0 and radius r say, T : V → B satisﬁes (3.1.22) for all x, y ∈ V , and T y0 − y0 ≤ r (1 − q). Proof of Theorem 3.1.4. G(x, τ ) = 0 if and only if x = Tτ x := x − L−1 G(x, τ ),

(3.1.24)

where L := D1 G(x0 , τ0 ). Now, Tτ x − Tτ y = L−1 ( D1 G(x0 , τ0 )(x − y) − ( G(x, τ ) − G(y, τ ) ) ) . It follows from the continuous diﬀerentiability of G and the boundedness of L−1 that we can achieve Tτ x − T τ y ≤ q x − y

(3.1.25)

for τ − τ0 B0 , x − x0 B1 and y − y0 B1 suﬃciently small. Also Tτ x0 − x0 is then arbitrarily small. Hence Lemma 3.1.8 (cf. the remark following it) implies the solvability of the equation Tτ x = x, hence of the

equation G(x, τ ) = 0 (for all τ suﬃciently near τ0 ).

Exercises for § 3.1 1)

2)

Let (xn )n∈N be a sequence in a Hilbert space H that converges weakly to 0. Under which additional conditions does xn converge to 0 (in the ordinary sense - one also calls this strong convergence). Let F be a subset of a Hilbert space H, and let F be its weak closure, i.e. the set of all weak limits of sequences in F . Is F closed (w.r.t. the ordinary topology of H)? Is F weakly closed? (The latter means that the limit of each weakly convergent subsequence of F is contained in F .)

3.2 The Sobolev Space W 1,2 = H 1,2

91

3.2 The Sobolev Space W 1,2 = H 1,2 In this section, we shall introduce another Hilbert space, the Sobolev space W 1,2 , that we shall utilize below. A reader who wants the motivation ﬁrst might wish to read § 3.3 before the present section. Deﬁnition 3.2.1 Let u ∈ L2 (Ω). Then v ∈ L2 (Ω) is called the weak derivative of u in the xi -direction (x = (x1 , . . . , xd ) in Rd ) if ∂ϕ ϕ v dx = − u i dx (3.2.1) ∂x Ω Ω for all ϕ ∈ C01 (Ω).1 Notation: v = Di u. We say that u is weakly diﬀerentiable if u has a derivative in the xi -direction for all i ∈ {1, 2, . . . , d}. It is clear that every u ∈ C 1 (Ω) is weakly diﬀerentiable on every Ω ⊂⊂ Ω, and that the weak derivatives of such a u are just the usual derivatives, (3.2.1) being the rule for integration by parts. Thus the possibility of integration by parts is the basis of the concept of weak derivatives. Lemma 3.2.1 Let u ∈ L2 (Ω), and suppose Di u(x) exists if dist(x, ∂Ω) > h, then Di uh (x) = (Di u)h (x). Proof.

By diﬀerentiating under the integral sign, we get 1 ∂ (x − y) u(y) dy Di uh (x) = d h ∂xi h 1 ∂ (x − y) u(y) dy =− d h ∂y i h (x − y) 1 Di u(y) dy (by (3.2.1)) = d h h = (Di u)h (x).

Lemmas 3.1.6 and 3.2.1 together with (3.2.1) imply: Theorem 3.2.1 Let u, v ∈ L2 (Ω). Then v = Di u if and only if there exist un ∈ C ∞ (Ω) such that un → u, Di un → v

in L2 (Ω).

1

Such a ϕ is also called a test-function on Ω.

92

3 Harmonic Maps

Deﬁnition 3.2.2 The Sobolev space W 1,2 (Ω) is the space consisting of all u in L2 (Ω) which have weak derivatives (lying in L2 (Ω)) in every direction xi (i = 1, . . . , d). We deﬁne a scalar product and a norm on W 1,2 (Ω) by u·v+

(u, v)W 1,2 := Ω

and

d i=1

Di u · Di v

Ω

12 uW 1,2 := u, u W 1,2 .

We also deﬁne H 1,2 (Ω) as the closure of C ∞ (Ω) ∩ W 1,2 (Ω), and H01,2 (Ω) as the closure of C0∞ (Ω) (with respect to the W 1,2 -norm). Corollary 3.2.1 W 1,2 (Ω) is complete with respect to · W 1,2 , and hence a Hilbert space. Also, W 1,2 (Ω) = H 1,2 (Ω). Proof. Let (un ) be a Cauchy sequence in W 1,2 (Ω). Then (un ) and (Di un ) are Cauchy sequences in L2 (Ω). Since L2 (Ω) is complete, there exist u, v i ∈ L2 (Ω) such that un → u and Di un → v i in L2 (Ω), i = 1, . . . , d. Now, for any ϕ ∈ C01 (Ω), we have Di un · ϕ = − un · Di ϕ, and the left side converges to v i · ϕ, while the right side converges to − u · Di ϕ. Hence Di u = v i , and u ∈ W 1,2 (Ω). This proves the completeness. In order to show the equality H 1,2 (Ω) = W 1,2 (Ω), we need to verify that the space C ∞ (Ω) ∩ W 1,2 (Ω) is dense in W 1,2 (Ω). For n ∈ N, we put 1 Ωn := x ∈ Ω : ||x|| < n, dist(x, δΩ) > , n with Ω0 := Ω−1 := ∅. Thus, Ωn ⊂⊂ Ωn+1 , and

Ωn = Ω.

n∈N

We let {αj }j∈N be a partition of unity subordinate to the cover ¯n−1 Ωn+1 \ Ω of Ω. Let u ∈ W 1,2 (Ω). By Theorem 3.2.1, for every ε > 0, we may ﬁnd a positive number hn for any n ∈ N such that hn ≤ dist(Ωn , δΩn+1 )

3.2 The Sobolev Space W 1,2 = H 1,2

93

ε . 2n Since the αn constitute a partition of unity, on any Ω ⊂⊂ Ω, at most ﬁnitely many of the smooth functions (αn u)hn are non zero. Consequently, u ˜ := (αn u)hn ∈ C ∞ (Ω). ||(αn u)hn − αn u||W 1,2 (Ω) <

n

We have

||u − u ˜||W 1,2 (Ω) ≤

||(αn u)hn − αn u|| < ε,

n

and we see that every u ∈ W 1,2 (Ω) can be approximated by C ∞ -functions.

Examples. 1)

Let Ω = (−1, 1) ⊂ R.

u(x) := |x|. Then u ∈ W 1,2 , and 1, D u(x) = −1,

0 < x < 1, −1 < x < 0.

Indeed, for every ϕ ∈ C01 , one veriﬁes: 0 1 −ϕ(x) dx + ϕ(x) dx = − −1

2)

0

1, u(x) := 0,

1 −1

ϕ (x) · |x| dx .

0 ≤ x < 1, −1 < x < 0.

This function is not in W 1,2 (Ω), since otherwise we would be forced to have D u(x) = 0 for x = 0, i.e. D u ≡ 0 in L2 , but it is not true for every ϕ ∈ C01 (−1, 1) that 1 1 1 ϕ(x) · 0 dx = − ϕ (x) u(x) dx = − ϕ (x) dx = ϕ(0). 0= −1

−1

0

We shall now prove a number of technical results about the Sobolev space W 1,2 that should also be helpful for the reader to familiarize herself or himself with the calculus of weak derivatives. If the reader, however, fears getting lost in technicalities, she or he may directly proceed to Theorem 3.2.2 and return to the lemmas only when they are applied. Lemma 3.2.2 Let Ω0 ⊂⊂ Ω, and suppose g ∈ W 1,2 (Ω) and u ∈ W 1,2 (Ω0 ) are such that u − g ∈ H01,2 (Ω0 ). Then u(x), x ∈ Ω0 , v(x) := g(x), x ∈ Ω\Ω0

94

3 Harmonic Maps

lies in W 1,2 , and Di v(x) =

x ∈ Ω0 , x ∈ Ω\Ω0 .

Di u(x), Di g(x),

Proof. By replacing u by u − g, we may assume g = 0 and u ∈ H01,2 (Ω0 ). Hence there exists a sequence (un ) in C0∞ (Ω0 ) such that un → u in W 1,2 (Ω0 ). In particular, (3.2.2) un = 0 in a neighborhood of ∂Ω0 . Hence, if v, v i and vn denote the extensions by zero of u, Di u and un respectively to Ω, it is clear that (vn ) is a sequence in C0∞ (Ω) converging in

W 1,2 (Ω) to the element v of H 1,2 (Ω), with Di v = v i . Lemma 3.2.3 Let f ∈ C 1 (R), with M := supy∈R |f (y)| < ∞. Then, for every u ∈ W 1,2 (Ω), we have f ◦ u ∈ W 1,2 (Ω) and D (f ◦ u) = f (u) D u. Choose (un ) in C ∞ (Ω) converging to u in W 1,2 (Ω). Then 2 2 |f (un ) − f (u)| dx ≤ M |un − u|2 dx → 0

Proof.

Ω

and

Ω

|f (un ) D un − f (u) D u|2 dx Ω ≤ M2 |D un − D u|2 dx + |f (un ) − f (u)| |D u|2 dx . Ω

Ω

By passing to a subsequence of (un ), we may (in view of a well-known result on L2 -convergence2 ) assume that (un ) converges pointwise to u almost everywhere in Ω. Since f is continuous, f (un ) also converges to f (u) pointwise almost everywhere in Ω. Hence the second integral above also tends to 0 as n → ∞, by Lebesgue’s dominated convergence theorem. Thus f (un ) → f (u) and D (f (un )) = f (un ) D (un ) → f (u) D u in L2 (Ω),

proving that f ◦ u ∈ W 1,2 with D (f ◦ u) = f (u) D u. The next lemma gives a useful characterization of Sobolev functions. It may also be used to supply an alternative proof of Lemma 3.2.3. Lemma 3.2.4 u ∈ L2 (Ω) belongs to the Sobolev space W 1,2 (Ω) if and only if u has a representative u

that is absolutely continuous on almost all line segments in Ω parallel to the coordinate axes and whose partial derivatives (in the classical sense) are in L2 (Ω). 2

see e.g. [J4] or any other textbook on advanced analysis

3.2 The Sobolev Space W 1,2 = H 1,2

95

Proof. “⇒”: Let u ∈ W 1,2 (Ω). One may exhaust almost all of Ω by a countable union of rectangles R := a1 , b1 × · · · × ad , bd . We shall prove the claim for such a rectangle R. The general result can then be deduced by a standard diagonal sequence argument that we leave to the reader. (Anyway, the case of a rectangle will actually suﬃce for applications.) By the proof of Theorem 3.2.1, the regularizations uh of u converge to u in W 1,2 . W.l.o.g., we shall prove the result for line segments parallel to the 1st axis. We thus write x ∈ R as with x ∈ a2 , b2 × · · · × ad , bd . x = x1 , x , By Fubini’s theorem, we ﬁnd a sequence hn → 0 with

b1

lim

n→∞

uhn (x1 , x) − u(x1 , x)2 + D uhn (x1 , x) − D u(x1 , x)2 dx1 = 0

a1

older’s inequality, we then also have for almost all x. By an application of H¨

b1

lim

n→∞

uh (x1 , x) − u(x1 , x) + D uh (x1 , x) − D u(x1 , x) dx1 = 0 n n

a1

for almost all x. Finally, we may also assume that uhn converges to u pointwise almost everywhere, by selecting a subsequence, as noted before in the proof of Lemma 3.2.3. From the preceding inequality, we see that for each such x and for every ε > 0, there exists N ∈ N such that for n ≥ N and x1 ∈ [a1 , b1 ] uhn (x1 , x) − uhn (a1 , x) ≤

b1

a1 b1

≤

D uh (ξ 1 , x) dξ 1 n

since uhn is smooth

D u(ξ 1 , x) dξ 1 + ε.

a1

Since uhn converges a.e. to u, we may assume that for some x1 ∈ [a1 , b1 ], uhn (x1 , x) converges to u(x1 , x). The preceding inequality then implies that uhn (x1 , x) is uniformly bounded for x1 ∈ [a1 , b1 ]. Also, the uhn are absolutely continuous as functions of x1 , uniformly w.r.t. to h. Namely, the L1 convergence of D uhn to D u that we noted above implies that for each η there exists δ > 0 with D uh (ξ 1 , x) dξ 1 < η n I

whenever the measure of I ⊂ [a1 , b1 ] is smaller than δ. We now apply the Arzel` a-Ascoli theorem and see that uhn converges uniformly on [a1 , b1 ] to an absolutely continuous function. u therefore agrees with an absolutely continuous function almost everywhere, and thus has the desired property.

96

3 Harmonic Maps

“⇐”: The converse is easier (and less important): Let u have a represenu tative u

with the absolute continuity property. For every ϕ ∈ C0∞ (Ω), ϕ

then shares the same property. Therefore, for i = 1, . . . , d, u

Di ϕ = − Di u

ϕ Ω

Ω

on almost every line segment in Ω parallel to the ith axis and with end points

satisﬁes the in Rd \ supp ϕ. One then sees from Fubini’s theorem that Di u properties required for the weak derivative of u.

We shall next describe the relation between weak derivatives and diﬀerence quotients. For any function u : Ω → R, we deﬁne the diﬀerence quotients of u in the usual way: ∆hi u(x) :=

u(x + hei ) − u(x) h

(h = 0),

where ei denotes the i-th unit vector of Rd , i = 1, . . . , d. Lemma 3.2.5 Suppose u ∈ W 1,2 (Ω), Ω ⊂⊂ Ω, and h < dist(Ω , ∂Ω). Then ∆hi u ∈ L2 (Ω ), and ∆hi uL2 (Ω ) ≤ Di uL2 (Ω) .

(3.2.3)

Proof. By the usual approximation argument, it is enough to prove (3.2.3) for u ∈ C 1 (Ω) ∩ W 1,2 (Ω). In that case, we have ∆hi u(x) =

1 h

h

Di u(x1 , . . . , xi−1 , xi + ξ, xi+1 , . . . , xd ) dξ, 0

hence the Schwarz inequality yields |∆hi u(x)|2 ≤

1 h

h

|Di u(x1 , . . . , xi + ξ, . . . , xd )|2 dξ, 0

so that Ω

|∆hi

1 u(x)| dx ≤ h

h

|Di u| dx dξ =

2

|Di u|2 dx.

2

0

Ω

Ω

3.2 The Sobolev Space W 1,2 = H 1,2

97

Conversely, we have: Lemma 3.2.6 Let u ∈ L2 (Ω), and suppose there exists a K < ∞ such that for all Ω ⊂⊂ Ω and all h > 0 with h < dist(Ω , ∂Ω), ∆hi uL2 (Ω ) ≤ K.

(3.2.4)

Then the weak derivative Di u exists, Di u = limh→0 ∆hi u in L2 , and in particular (3.2.5) Di uL2 (Ω) ≤ K. Proof. By Theorem 3.1.3, the L2 (Ω )-bounded set (∆hi u) contains a weakly convergent sequence (as h → 0). Since this is true for every Ω ⊂⊂ Ω, by the standard diagonal sequence argument there exists a sequence hn → 0 and a v ∈ L2 (Ω) with vL2 (Ω) ≤ K and ϕ ∆hi n u −→ ϕv Ω

Ω

If hn < dist(supp ϕ, ∂Ω) (where supp ϕ is the closure of for all ϕ ∈ the set {x ∈ Ω : ϕ(x) = 0}), then n→∞ n ϕ ∆hi n u = − u ∆−h ϕ −→ − u Di ϕ for ϕ ∈ C01 (Ω). i C01 (Ω).

Ω

Ω

Ω

Hence

ϕv = −

Ω

u Di ϕ, Ω

which means v = Di u. We shall now prove the Poincar´e inequality: Theorem 3.2.2 For any u ∈ H01,2 (Ω), we have uL2 (Ω) ≤

|Ω| ωd

d1

D uL2 (Ω) ,

(3.2.6)

where |Ω| denotes the (Lebesgue) measure of Ω and ωd the measure of the unit ball in Rd . Proof. Suppose ﬁrst that u ∈ C01 (Ω), we set u(x) = 0 for x ∈ Rd \Ω. For any ω ∈ Rd with |ω| = 1, we have ∞ ∂ u(x + rω) dr. u(x) = − ∂r 0

98

3 Harmonic Maps

Integration over the unit sphere with respect to ω yields ∞ 1 ∂ u(x + rω) dω dr u(x) = − dωd 0 |ω|=1 ∂r d 1 xi − y i 1 ∂ dy, = u(x − y) dωd Ω |x − y|d−1 i=1 ∂y i |x − y| and therefore 1 |u(x)| ≤ dωd

Ω

(3.2.7)

1 |D u(y)| dy. |x − y|d−1

then implies the desired estimate for u ∈ Lemma 3.2.7 below (with µ = C01 (Ω). Let now u ∈ H01,2 (Ω). By deﬁnition of H01,2 (Ω), there exists a sequence (un )n∈N ⊂ C01 (Ω) converging to u in H 1,2 (Ω), i.e. un and D un converge to u and D u, resp., in L2 (Ω).

Since (3.2.6) holds for every un , it then also holds for u. 1 d)

Lemma 3.2.7 For f ∈ L2 (Ω) and 0 < µ ≤ 1, deﬁne |x − y|d(µ−1) f (y) dy (Vµ f )(x) := Ω

Then Vµ f L2 (Ω) ≤

1 1−µ ω |Ω|µ f L2 (Ω) . µ d

Proof. Let B(x, R) := {y ∈ Rd : |x − y| ≤ R}; choose R so that |Ω| = |B(x, R)| = ωd Rd . Then |Ω\(Ω ∩ B(x, R))| = |B(x, R)\(Ω ∩ B(x, R))|, and |x − y|d(µ−1) ≤ Rd(µ−1) , |x − y| ≥ R, |x − y|d(µ−1) ≥ Rd(µ−1) , |x − y| ≤ R. Hence

|x − y|d(µ−1) dy ≤

Ω

|x − y|d(µ−1) dy B(x,R)

1 ωd Rdµ µ 1 = ωd1−µ |Ω|µ . µ

=

We now write d (µ−1) d (µ−1) ) (x − y 2 |f (y)|) |x − y|d(µ−1) |f (y)| = (x − y 2

(3.2.8)

3.3 The Dirichlet Principle. Weak Solutions of the Poisson Equation

99

and obtain by the Schwarz inequality |(Vµ f )(x)| ≤ |x − y|d(µ−1) |f (y)| dy Ω

12

|x − y|

≤

d(µ−1)

dy

Ω

|x − y|

d(µ−1)

|f (y)| dy 2

12 .

Ω

Hence by Fubini’s theorem 2 2 d(µ−1) |f (y)|2 dy. |Vµ f (x)| dx ≤ |x − y| dx Ω

Ω

The Lemma now follows from (3.2.8).

Remark. The procedure adopted in the proof of Lemma 3.2.7, namely replacing Ω by a ball of the same measure and comparing the corresponding integrals, is called symmetrisation, and is an important tool in analysis.

Exercises for § 3.2 1) 2)

3) 4) 5) 6)

Let Ω = (−1, 1) ∈ R. For which α ∈ R is |x|α a function in W 1,2 (Ω)? Let ◦ B(0, 1) := x ∈ Rd : |x| < 1 ◦ x in W 1,2 B(0, 1) ? be the open unit ball in Rd . For which d is |x| Let u ∈ W 1,2 (Ω). Suppose D u ≡ 0 in Ω (weak derivative). Show u ≡ const.. that u∈ H 1,2 (D) need not be Let D be the open unit disk in R2 . Show ∞ in L (D) by considering u(x) = log − log 12 |x| . With D as before, show that u ∈ H 1,2 ∩ L∞ (D) need not be in C 0 (D) by considering u(x) = sin log − log 12 |x| . Use Lemma 3.2.4 for an alternative proof of Lemma 3.2.3.

3.3 The Dirichlet Principle. Weak Solutions of the Poisson Equation For Ω ⊂ Rd open and u ∈ C 2 (Ω), the Laplace operator applied to u is deﬁned by d ∂2u . ∆ u(x) := (∂xi )2 i=1 u is called harmonic in Ω if ∆ u = 0 in Ω. Let Ω now be a bounded open set in Rd and g ∈ H 1,2 (Ω). The Dirichlet principle consists in seeking a solution u of the boundary value problem

100

3 Harmonic Maps

∆ u = 0 in Ω u = g on ∂Ω

(to be interpreted in the sense that u − g ∈ H01,2 (Ω))

by minimizing the Dirichlet integral 1 |D v|2 , D(v) := 2 Ω

D v = (D1 v, . . . , Dd v)

among all v ∈ H 1,2 (Ω) with v−g ∈ H01,2 (Ω). Let us brieﬂy convince ourselves that this procedure does lead to a solution of the problem. Let 1 1,2 2 1,2 |D v| : v ∈ H (Ω), v − g ∈ H0 (Ω) , m := inf 2 Ω and let (un ) be a minimizing sequence, i.e. un −g ∈ H01,2 (Ω) and |D un |2 → m. We have 1 2 | D (un − uk ) | D(un − uk ) = 2 Ω 2 un + uk 2 2 = |D un | + |D uk | − 2 D 2 Ω Ω Ω un + u k (3.3.1) = 2 D(un ) + 2 D(uk ) − 4 D 2 We also have

u n + uk by deﬁnition of m 2 1 1 ≤ D (un ) + D (uk ) 2 2

m≤D

and this tends to m for n, k → ∞ as (un ) is a minimizing sequence. Using this information in (3.3.1), we see that D (un − uk ) → 0

for n, k → ∞,

and thus (D un )n∈N is a Cauchy sequence in L2 (Ω). By the Poincar´e inequality (Thm. 3.2.2), we also see that un − uk L2 (Ω) ≤ D (un − uk )L2 (Ω)

since un − uk ∈ H01,2 (Ω),

and therefore (un )n∈N is also a Cauchy sequence in L2 . Altogether (un )n∈N is a Cauchy sequence in H 1,2 (Ω), and it therefore converges to some u ∈ H 1,2 with D (u) = m (= lim D (un )) n→∞

3.3 The Dirichlet Principle. Weak Solutions of the Poisson Equation

101

and u − g ∈ H01,2 (Ω) (since H01,2 (Ω) and therefore also the aﬃne space g + H01,2 (Ω) are closed in H 1,2 (Ω)). d Now, for every v ∈ H01,2 and t ∈ R (recall that D u · D v = i=1 Di u · Di v), we have |D (u + tv)|2 = |D u|2 + 2t D u · D v + t2 |D v|2 . m≤ Ω

Ω

Ω

Ω

Diﬀerentiating with respect to t at t = 0, we get d 2 |D (u + tv)| t=0 = 2 Du·Dv 0= dt Ω Ω for all v ∈ H01,2 (Ω). Deﬁnition 3.3.1 u ∈ H 1,2 (Ω) is said to be weakly harmonic (or a weak solution of the Laplace equation) if Du·Dv = 0 for all v ∈ H01,2 (Ω). (3.3.2) Ω

Obviously, a harmonic function satisﬁes (3.3.2). In order to obtain harmonic functions by means of the Dirichlet principle, we must conversely show that a solution of (3.3.2) is automatically of class C 2 , and hence also harmonic. This problem will be treated in the next section. Here, we also wish to address the following more general situation. Deﬁnition 3.3.2 Let f ∈ L2 (Ω). Then u ∈ H 1,2 (Ω) is said to be a weak solution of the Poisson equation ∆ u = f if, for all v ∈ H01,2 (Ω), Du·Dv + f · v = 0. (3.3.3) Ω

Ω

Remark. For prescribed boundary values g (in the sense u − g ∈ H01,2 (Ω)), we can obtain a solution of (3.3.3) by minimizing 1 |D w|2 + f ·w 2 Ω Ω in the class of all w ∈ H 1,2 (Ω) with w − g ∈ H01,2 (Ω). Observe that, by Poincar´e’s inequality (Theorem 3.2.2), this expression is bounded from below, since we have assumed that w has prescribed boundary values g. Another possibility of ﬁnding a solution of (3.3.3) with u − g ∈ H01,2 , g ﬁxed, is as follows: if we set w := u − g ∈ H01,2 , then w must satisfy Dw·Dv = − f ·v− Dg ·Dv (3.3.4) Ω

H01,2 .

Ω

Ω

for all v ∈ Now the Poincar´e inequality (Theorem 3.2.2) implies that H01,2 (Ω) is already a Hilbert space with respect to the scalar product

102

3 Harmonic Maps

Du·Dv

((u, v)) := (D u, D v)L2 (Ω) = Ω

Also, again by Theorem 3.2.2, for f ∈ L2 (Ω), v ∈ H01,2 (Ω), f · v ≤ f L2 · vL2 ≤ const. f L2 · D vL2 . Ω

Hence

f ·v−

L v := − Ω

Dg ·Dv

Ω 1,2 H0 (Ω)

with respect to ((· ,·)). Thus, deﬁnes a bounded linear functional on by Theorem 3.1.2, there exists a unique w ∈ H01,2 such that for all v ∈ H01,2

((w, v)) = L v and this w solves (3.3.4).

This argument also shows that the solution of (3.3.2) is unique. This uniqueness also follows from the more general statement below: Lemma 3.3.1 (Stability Lemma) Let ui , i = 1, 2, be weak solutions of ∆ ui = fi with u1 − u2 ∈ H01,2 (Ω). Then u1 − u2 W 1,2 (Ω) ≤ const. f1 − f2 L2 (Ω) . In particular the weak solution of the boundary value problem ∆ u = f, u−g ∈ H01,2 (Ω), is unique. Proof.

We have

D (u1 − u2 ) · D v = −

Ω

(f1 − f2 ) v Ω

for all v ∈ H01,2 (Ω). In particular, D (u1 − u2 ) · D (u1 − u2 ) = − (f1 − f2 ) (u1 − u2 ) Ω

Ω

≤ f1 − f2 L2 (Ω) u1 − u2 L2 (Ω) ≤ const f1 − f2 L2 (Ω) D u1 − D u2 L2 (Ω) by Theorem 3.2.2. Hence D u1 − D u2 L2 (Ω) ≤ const f1 − f2 L2 (Ω) . Another application of Theorem 3.2.2 ﬁnishes the proof of the lemma.

We have thus proved the existence and uniqueness of weak solutions of the Poisson equation in a very simple manner. It is then the task of regularity theory to show that, for suﬃciently good f , a weak solution of ∆ u = f is in fact of class C 2 , hence a classical solution. This will be achieved in the next sections.

3.4 Harmonic and Subharmonic Functions

103

Exercises for § 3.3 1)

Consider (aij )i,j=1,...,d with aij ∈ R and d

aij ξ j ξ j ≥ λ|ξ|2

for all ξ = ξ 1 , . . . , ξ d ∈ Rd ,

i,j=1

where λ > 0. Given f ∈ L2 (Ω), g ∈ H 1,2 (Ω), give the proper deﬁnition and show existence and uniqueness of a weak solution u of d

aij

i,j=1

∂2 u=f ∂xi ∂xj u=g

in Ω on ∂Ω.

3.4 Harmonic and Subharmonic Functions In this section, we shall present some simple results about harmonic and subharmonic functions, like the mean value theorem, and we shall show the smoothness of weakly harmonic functions. More precise and more diﬃcult regularity theorems will be presented in the next section. We let Ω be a bounded domain in Rd with a smooth boundary, and we let u be a function that is of class C 2 on the closure Ω of Ω. We denote the ∂ will denote the diﬀerentiation in outward normal vector of Ω by ν, and ∂ν the direction of ν. The divergence theorem (integration by parts) implies the following formula ∂u (x) ds(x), (3.4.1) ∆ u(x) dx = Ω ∂Ω ∂ν with ds denoting the surface element of ∂Ω, and also for u, v ∈ C 2 (Ω) ( v(x) ∆ u(x) − u(x) ∆ v(x) ) dx Ω

= ∂Ω

∂v ∂u (x) − u(x) (x) v(x) ∂ν ∂ν

ds(x).

The latter formula is sometimes called Green’s identity. Lemma 3.4.1 Let G(x − y) :=

log |x − y|, 1 2−d , d(2−d)ωd |x − y| 1 2π

d=2 . d>2

(3.4.2)

104

3 Harmonic Maps

Then, for any u ∈ C 2 (Ω) and any y ∈ Ω, ∂u(x) ∂ G(x − y) − G(x − y) ds(x) u(x) u(y) = ∂ν ∂ν ∂Ω + G(x − y) ∆ u dx,

(3.4.3)

Ω ∂ denotes diﬀerentiation in the direction of the outward normal of Ω, where ∂ν and ds the surface element on ∂Ω.

Proof. We consider only the case d = 2 which is of primary interest to us. The case d > 2 is handled similarly. Observe that ∆ G(x − y) = 0 for x = y. Hence for > 0 suﬃciently small, we have by (3.4.2) G(x − y) ∆ u(x) dx Ω\B(y, )

∂G(x − y) ∂u(x) − u(x) ds G(x − y) ∂ν ∂ν ∂Ω ∂G(x − y) ∂u(x) − u(x) ds G(x − y) + ∂ν ∂ν ∂B(y, )

=

(3.4.4)

(here in the second integral, ν is the outward normal to Ω\B(y, ), hence the inward normal to B(y, )). Now, ∂u(x) ∂u(x) 1 ds = ds (3.4.5) G(x − y) log ∂B(y, ) ∂ν 2π ∂B(y, ) ∂ν ≤ log sup |D u| B(y, ) →0 and u(x) ∂B(y, )

1 ∂G(x − y) =− ∂ν 2π

as → 0,

u(x) ds → −u(y)

as → 0.

∂B(y, )

Hence (3.4.3) follows from (3.4.4), (3.4.5) and (3.4.6).

(3.4.6)

Corollary 3.4.1 If ψ ∈ C02 (Ω), then ψ(y) = G(x − y) ∆ ψ(x) dx = ∆y G(x − y) ψ(x) dx

(3.4.7)

Ω

Ω

for all y ∈ Ω; here the subscript y on the Laplacian signiﬁes that it operates on the variable y.

3.4 Harmonic and Subharmonic Functions

105

Proof. The ﬁrst equation follows from (3.4.3), since the boundary terms vanish; the second follows from the ﬁrst by integration by parts, since G is symmetric in x and y.

Theorem 3.4.1 (Mean value theorem) Let u ∈ C 2 (Ω) be harmonic, i.e. ∆ u(x) = 0 in Ω. Then for any y ∈ Ω and R > 0 with B(y, R) ⊂⊂ Ω 1 1 u(y) = u(x) ds(x) = u(x) dx. dωd Rd−1 ∂B(y,R) ωd Rd B(y,R) Proof.

(3.4.8)

We put

Γ (x − y) := ΓR (x − y) :=

1 log |x − y| − 2π log R, 1 2−d − R2−d d(2−d)ωd |x − y| 1 2π

d=2

= G(x − y) − G(R). Since Γ (x − y) and G(x − y) diﬀer only by a constant, (3.4.1) implies that (3.4.3) also holds with G replaced by Γ . We apply the resulting formula to B(y, R) in place of Ω, to obtain ∂G (x − y) ds(x) + u(x) Γ (x − y) ∆ u(x) dx u(y) = ∂ν ∂B(y,R) B(y,R) ∂G ∂Γ = and Γ (x − y) = 0 for x ∈ ∂B(y, R) since ∂ν ∂ν 1 = u(x) ds(x) + Γ (x − y) ∆ u(x) dx (3.4.9) dωd Rd−1 ∂B(y,R) B(y,R) Since we assume ∆ u = 0, the last integral vanishes, and the ﬁrst part of (3.4.8) results. For the second part, we apply the ﬁrst part to 0 ≤ ≤ R to obtain

dωd d−1 u(y) = ∂B(y, ) u(x) ds(x) and integrate w.r.t from 0 to R. Deﬁnition 3.4.1 u ∈ C 2 (Ω) is called subharmonic if ∆ u(x) ≥ 0 in Ω.

(3.4.10)

Since Γ (x − y) ≥ 0 for x ∈ B(y, R) (3.4.9) also implies Corollary 3.4.2 Let u ∈ C 2 (Ω) be subharmonic in Ω, B(y, R) ⊂⊂ Ω. Then 1 u(x) dx. (3.4.11) u(y) ≤ ωd Rd B(y,R)

106

3 Harmonic Maps

Corollary 3.4.2 in turn implies the strong maximum principle Corollary 3.4.3 Let u be subharmonic in Ω, and assume that there is some y ∈ Ω with u(y) = supΩ u =: µ. Then u ≡ µ in Ω. Proof. Let Ω := {x ∈ Ω : u(x) = µ}. By assumption, Ω = ∅. Since u is continuous, Ω is closed relative to Ω. Let y ∈ Ω . Then by (3.4.11), applied to u − µ, in some ball B(y, R) ⊂⊂ Ω 1 (u − µ) ≤ 0 by deﬁnition of µ. 0 ≤ u(y) − µ ≤ ωd Rd B(y,R) Therefore, we must have equality throughout, i.e. u ≡ µ in B(y, R). Therefore Ω is also open relative to Ω. Altogether, we conclude Ω = Ω

which gives the claim. Returning to harmonic functions, we have

Corollary3.4.4 Let u be harmonic in Ω, y ∈ Ω. Then, for k1 , . . . , kd ∈ N, d with k := i=1 ki , we have ∂ku dk sup |u|, u(y) (3.4.12) k1 ≤ ∂x1 · · · ∂xkdd dist (y, ∂Ω) Ω with dist (y, ∂Ω) := sup { R ≥ 0 : B(y, R) ⊂ Ω } Proof. If u is harmonic, so is each component of the gradient ∂u ∂u D u = ∂x 1 , · · · , ∂xd . By Theorem 3.4.1, for R < dist (y, ∂Ω) 1 1 D u(x) dx = u ν ds(x). D u(y) = ωd Rd B(y,R) ωd Rd ∂B(y,R)

(3.4.13)

Hence |D u(y)| ≤ ≤

1 ωd R d

sup |u| Vol ( ∂B(y, R) ) B(y,R)

d sup |u|, R B(y,R)

(3.4.14)

and since this holds for all R < dist (y, ∂R), then also |D u(y)| ≤

d sup |u|. dist (y, ∂Ω) Ω

(3.4.15)

3.4 Harmonic and Subharmonic Functions

107

Applying (3.4.14) with D u in place of u, we obtain for the second derivatives D2 u of u, with R = 12 dist (y, ∂Ω) 2 D u(y) ≤ ≤

2d dist (y, ∂Ω)

|D u|

sup B (y, 12 dist(y,∂Ω))

4d2 2

dist (y, ∂Ω)

sup |u|, Ω

applying (3.4.14) again with R =

1 dist (y, ∂Ω) . 2

Higher order derivatives are controlled by the same pattern.

Corollary 3.4.5 Let (un )n∈N be a sequence of harmonic functions in Ω with uniformly bounded L1 -norms. Then a subsequence converges uniformly on compact subdomains of Ω to a harmonic function. Proof.

Let

Ωk :=

x ∈ Ω : dist (x, ∂Ω) >

Then

∞

Ω=

1 , k

|x| < k

.

Ωk .

n=1

We shall show the existence of a subsequence of (un ) that converges on Ω1 . By the same argument, one will ﬁnd a subsequence of that sequence that also converges on Ω2 , and so on. In other words, in order to ﬁnd a subsequence that converges on all compact subdomains, one just applies the standard diagonal sequence argument. Since |un |L1 (Ω) ≤ K for some ﬁxed K, and for y ∈ Ω2 2d un (y) = ωd

B(y, 12 )

un (x) dx

by Theorem 3.4.1, sup |un | ≤ Ω2

2d K. ωd

Therefore, by Cor. 3.4.4, all derivatives of the un are uniformly bounded on a-Ascoli theΩ1 . Thus, also all derivatives are equicontinuous. By the Arzel` orem, for any j ∈ N the j th derivatives of the un then contain a convergent subsequence, and by the usual diagonal sequence argument again, we ﬁnd a subsequence of (un ) that converges on Ω1 together with all its derivatives. The limit has to be harmonic, of course, since in particular the second deriv

atives converge, and so the equation ∆ un = 0 persists in the limit.

108

3 Harmonic Maps

We may now prove the regularity of weakly harmonic functions, i.e. of u ∈ W 1,2 (Ω) satisfying Du·Dv = 0 for all v ∈ H01,2 (Ω). (3.4.16) Ω

In fact, condition (3.4.16) can be substantially weakened without loosing the regularity. First, (3.4.16) trivially implies Du·Dϕ = 0 for all ϕ ∈ C0∞ (Ω). (3.4.17) Ω

Integrating (3.4.17) by parts yields u ∆ϕ = 0

for all ϕ ∈ C0∞ (Ω).

(3.4.18)

Ω

In order for the latter relation to be meaningful, we only have to require that u is integrable. For our purposes, however, it entirely suﬃces to consider L2 functions, although the following result (“Weyl’s Lemma”) holds also without that restriction, with essentially the same proof. Theorem 3.4.2 Let u ∈ L2 (Ω) satisfy u(x) ∆ ϕ(x) = 0 for all ϕ ∈ C0∞ (Ω). Ω ∞

Then u ∈ C (Ω). Proof.

We consider the molliﬁcations uh of u as given by (3.1.14), i.e. uh (x) = h (x − y) u(y) dy x−y

Ω

with h (x − y) = h1d h , with as in (3.1.14). Since we are interested in the limit h → 0, we may assume h < dist (x, ∂Ω). We claim that uh is harmonic at x since u is weakly harmonic. Indeed, ∆ uh (x) = ∆x h (x − y) u(y) dy, since h is smooth Ω = ∆y h (x − y) u(y) dy, Ω

with a subscript x or y denoting the variable w.r.t. which the Laplace operator is applied = 0, since u is weakly harmonic and h (x − y), as a function of y, has compact support in Ω if h < dist (x, ∂Ω). Since uh converges to u in L2 (Ω) as h → 0 by Lemma 3.1.6, we may assume

3.4 Harmonic and Subharmonic Functions

109

uh L2 (Ω) ≤ K for some K independent of h, and therefore for every bounded subset Ω0 of Ω also uh L1 (Ω0 ) ≤ K . By Cor. 3.4.5, as h → 0, we may ﬁnd a sequence (hn )n∈N converging to 0 for which (uhn )n∈N converges together with all its derivatives on compact subsets of Ω to a smooth harmonic function v. Since on the other hand, (uhn ) converges in L2 to u, we must have v = u, and therefore u is smooth since v is.

We ﬁnally need a little lemma about subharmonic functions. Lemma 3.4.2 Let u ∈ L2 (Ω) be weakly subharmonic in the sense that u(x) ∆ ϕ(x) ≥ 0 for all ϕ ∈ C0∞ with ϕ ≥ 0. Ω

Then u satisﬁes the mean value inequality, i.e. for all y ∈ Ω with R < dist (y, ∂Ω) 1 u(y) ≤ u(x) dx. ωd Rd B(y,R) Proof. We consider the molliﬁcations uh of u as in the proof of Theorem 3.4.2. Since u is weakly subharmonic, the uh are subharmonic as in the proof of Theorem 3.4.2. The uh therefore all satisfy the mean value inequality 1 u(x) dx, uh (y) ≤ ωd Rd B(y,R) and passing to the limit h → 0 yields the inequality for u.

Exercises for § 3.4 1)

Let Ω ⊂ Rd be a domain. Γ (x, y), deﬁned for x, y ∈ Ω, x = y, is called Green’s function for Ω if ∆x Γ (x, y) = 0 Γ (x, y) = 0

for x = y for x ∈ ∂Ω, y ∈ Ω

and Γ (x − y) − G(x − y) is bounded, with G as deﬁned in Lemma 3.4.1. If y is ﬁxed, one also says that Γ (x, y) is Green’s function for Ω with singularity at y. Show that a Green function for Ω (if it exists) is uniquely determined by the above requirements. What is the Green function f of a ball B(y, R) ⊂ Rd ?

110

2)

3)

3 Harmonic Maps

Let Ω ⊂ C be a domain in C which has a regular boundary in the sense that for each continuous φ : ∂Ω → Ω there exists a harmonic extension h : Ω → R with h|∂Ω = φ. Let z0 ∈ Ω, and let f : Ω → R be harmonic with f (z) = log |z − z0 | for all z ∈ ∂Ω. Put g(z, z0 ) := f (z) − log |z − z0 |. Show that g(z, z0 ) is Green’s function for Ω with singularity at z0 . Carry out the details of the proof of Lemma 3.4.1 for d > 2.

3.5 The C α Regularity Theory In this section, we shall derive more precise regularity results that will be needed in §§ 3.8, 3.11. We begin by recalling the important concept of H¨ older continuity: Deﬁnition 3.5.1 Let f : Ω → R, x0 ∈ Ω and α ∈ (0, 1). Then f is said to be H¨older continuous at x0 with exponent α if |f (x) − f (x0 )| < ∞. |x − x0 |α x∈Ω\{x0 } sup

(3.5.1)

If f is H¨older continuous (with exponent α) at every x0 ∈ Ω, then f is said to be H¨older continuous in Ω; notation: f ∈ C α (Ω). The space C k,α (Ω) is deﬁned similarly: it is the space of f ∈ C k (Ω) whose k-th derivatives are H¨ older continuous with exponent α. If (3.5.1) holds with α = 1, then f is said to be Lipschitz continuous at x0 . We deﬁne the H¨ older seminorm (of exponent α) by |f |C α (Ω) := sup x =y

|f (x) − f (y)| |x − y|α

(3.5.2)

and f C k,α (Ω) as the sum of f C k (Ω) and the H¨ older norms of all the partial derivatives of f oforder k. In place of C 0,α , we shall mostly simply write C α . Finally, C0k,α := f ∈ C k,α (Ω) : supp f ⊂⊂ Ω . (Ω0 ⊂⊂ Ω means that the closure of Ω0 is compact and contained in Ω0 .) Theorem 3.5.1 Let Ω ∈ Rd be - as always - open and bounded, and u(x) := G(x − y) f (y) dy, (3.5.3) Ω

with G(x − y) as deﬁned in § 3.4. Then

3.5 The C α Regularity Theory

111

a) if f ∈ L∞ (Ω) (i.e. supx∈Ω |f (x)| < ∞3 ), then u ∈ C 1,α , and uC 1,α (Ω) ≤ const. · sup |f |

(3.5.4)

for all α ∈ (0, 1); b) if f ∈ C0α (Ω), then u ∈ C 2,α (Ω), and uC 2,α (Ω) ≤ const. · f C α (Ω)

(0 < α < 1).

(3.5.5)

The constants in (3.5.4) and (3.5.5) depend on α, d and |Ω|. Proof.

a) The ﬁrst derivatives of u are given, up to a constant factor, by xi − y i f (y) dy. v i := d Ω |x − y|

Now, i v (x1 ) − v i (x2 ) ≤ sup |f | · Ω

i x1 − y i xi2 − y i − dy. d |x2 − y|d Ω |x1 − y|

(3.5.6)

By the Mean Value theorem, there exists an x3 on the segment from x1 to x2 such that i x1 − y i xi2 − y i const.|x1 − x2 | − . (3.5.7) ≤ |x1 − y|d |x2 − y|d |x3 − y|d We now set δ := 2 |x1 − x2 |, and choose R > δ such that Ω ⊂ B(x3 , R) (we can do this because Ω is bounded); we replace the domain of integration Ω in (3.5.6) by B(x3 , R) and split the new integral as = + (3.5.8) B(x3 ,R)

B(x3 ,δ)

B(x3 ,R)\B(x3 ,δ)

= I1 + I2 .

Then I1 ≤ 2

B(x3 ,δ)

1 dy = 2 ωd δ |x3 − y|d−1

(3.5.9)

while, on account of (3.5.7), we have I2 ≤ const. δ (log R − log δ); hence I1 + I2 ≤ const. |x1 − x2 |α for any α ∈ (0, 1). This proves a), since obviously we also have 3

sup signiﬁes here the essential supremum

(3.5.10)

112

3 Harmonic Maps

|v i (x)| ≤ const. sup |f |.

(3.5.11)

Ω

b) The second derivatives of u are given up to a constant factor by 1 ij |x − y|2 δij − d(xi − y i )(xj − y j ) f (y) dy; w (x) = |x − y|d+2 of course, we have yet to show that these integrals exist under the assumption f ∈ C0α (Ω), but this will also emerge during the rest of the proof. We set K(x − y) := |x − y|−d−2 |x − y|2 δij − d(xi − y i )(xj − y j ) i x − yi ∂ . = ∂xj |x − y|d Observe that

K(y) dy = |y|=R2

R1 <|y|
yi yj · − R2 |y|d

|y|=R1

yi yj · d (3.5.12) R1 |y|

=0 i

y since |y| d is homogeneous of degree 1 − d. Hence also K(y) dy = 0

(3.5.13)

Rd

as Cauchy principal value. We now set f (x) = 0 for x ∈ Rd \Ω (this preserves H¨older continuity) and write ij K(x − y) f (y) dy (3.5.14) w (x) = d R = (f (y) − f (x)) K(x − y) dy Rd

(by (3.5.13)). As before, we have for any x1 , x2 an x3 on the segment joining x1 and x2 such that |K(x1 − y) − K(x2 − y)| ≤

const. |x1 − x2 | . |x3 − y|d+1

We again set δ := 2|x1 − x2 |, and write (cf. (3.5.14)) wij (x1 ) − wij (x2 ) = (f (y) − f (x1 )) K(x1 − y) Rd −(f (y) − f (x2 )) K(x2 − y) dy = I1 + I2 ,

(3.5.15)

(3.5.16)

3.5 The C α Regularity Theory

113

where I1 is the integral over B(x1 , δ) and I2 that over Rd \B(x1 , δ). Then, since |f (y) − f (x)| ≤ f C α |x − y|α , we have

|I1 | ≤ f

{K(x1 − y) |x1 − y|α − K(x2 − y) |x2 − y|α } dy

Cα B(x1 ,δ)

≤ const. f C α · δ α .

(3.5.17)

Also, I2 =

Rd \B(x1 ,δ)

(f (x2 ) − f (x1 )) K(x1 − y) dy

+ Rd \B(x1 ,δ)

(f (y) − f (x2 )) (K(x1 − y) − K(x2 − y)) dy,

and the ﬁrst integral vanishes by (3.5.12). Using (3.5.15) and the fact that, for y = B(x3 , δ), const. 1 ≤ , |x3 − y|d+1 |x1 − y|d+1 we thus have

|I2 | ≤ const. δ f C α

Rd \B(x1 ,δ)

|x1 − y|α−d−1 dy

(3.5.18)

≤ const. δ α f C α . Now (3.5.5) follows from (3.5.16), (3.5.17) and (3.5.18).

Theorem 3.5.2 Let Ω ⊂⊂ Rd be open and Ω0 ⊂⊂ Ω; let u be a weak solution of ∆ u = f in Ω. Then: a) if f ∈ C 0 (Ω) (meaning f ∈ C 0 (Ω) and supx∈Ω |f (x)| < ∞), then u ∈ C 1,α (Ω), and (3.5.19) uC 1,α (Ω0 ) ≤ const. f C 0 (Ω) + uL2 (Ω) ; b) if f ∈ C α (Ω), then u ∈ C 2,α (Ω), and uC 2,α (Ω0 ) ≤ const. f C α (Ω) + uL2 (Ω) .

(3.5.20)

Proof. We shall ﬁrst prove the estimates (3.5.19) and (3.5.20) assuming that u ∈ C 2,α . Since Ω0 can be covered by a ﬁnite number of balls contained in Ω, it suﬃces to prove the estimates in the case Ω0 = B(0, r), Ω = B(0, R), 0 < r < R < ∞. Let 0 < R1 < R2 < R. We choose an η ∈ C0∞ (B(0, R2 )) such that η(x) = 1 for |x| ≤ R1 , and

114

3 Harmonic Maps

ηC k,α (B(0,R2 )) ≤ const. (R2 − R1 )−k−α .

(3.5.21)

ϕ := η u.

(3.5.22)

G(x − y) ∆ ϕ(x) dx.

(3.5.23)

We now consider By Corollary 3.4.1, we have

ϕ(y) = Ω

Now ∆ ϕ = η ∆ u + 2 D u · D η + u ∆ η,

(3.5.24)

∆ ϕC 0 ≤ ∆ uC 0 + const ηC 2 · uC 1

(3.5.25)

∆ ϕC α ≤ const. ηC 2,α (∆ uC α + uC 1,α ) ,

(3.5.26)

hence and all norms being over B(0, R2 ). By Theorem 3.5.1, we deduce from (3.5.25) and (3.5.26) respectively ϕC 1,α ≤ const. (∆ uC 0 + ηC 2 uC 1 )

(3.5.27)

and ϕC 2,α ≤ const. ηC 2,α (∆ uC α + uC 1,α ) .

(3.5.28)

Since u(x) = ϕ(x) for |x| < R1 , we thus have, in view of (3.5.21): 1 uC 1,α (B(0,R1 )) ≤ const. ∆ uC 0 (B(0,R2 )) + uC 1 (B(0,R2 )) (R2 − R1 )2 (3.5.29) and 1 uC 2,α (B(0,R1 )) ≤ const. (R2 − R1 )2+α uC α (B(0,R2 )) + uC 1,α (B(0,R2 )) .

(3.5.30)

We now interrupt the proof for some auxiliary results: Lemma 3.5.1 a) There exists a constant c1 such that for every ρ > 0 and any function v ∈ C 1 (B(0, ρ)) vC 0 (B(0,ρ)) ≤ DvC 0 (B(0,ρ)) + c1 vL2 (B(0,ρ)) .

(3.5.31)

b) There exists a constant c2 such that for every ρ > 0 and any function v ∈ C 1,α (B(0, ρ)) vC 1 (B(0,ρ)) ≤ |Dv|C α (B(0,ρ)) + c2 vL2 (B(0,ρ)) (here, |Dv|C α is the H¨ older seminorm deﬁned in (3.5.2)).

(3.5.32)

3.5 The C α Regularity Theory

115

Proof. If a) did not hold, for every n ∈ N, we could ﬁnd a radius ρn and a function vn ∈ C 1 (B(0, ρn )) with 1 = vn C 0 (B(0,ρn )) ≥ Dvn C 0 (B(0,ρn )) + nvn L2 (B(0,ρn )) .

(3.5.33)

We ﬁrst consider the case where the radii ρn stay bounded for n → ∞ in which case we may assume that they converge towards some radius ρ0 and we can consider everything on the ﬁxed ball B(0, ρ0 ). Thus, in that situation, we have a sequence vn ∈ C 1 (B(0, ρ0 )) for which vn C 1 (B(0,ρ0 )) is bounded. This implies that the vn are equicontinuous. By the theorem of Arzela-Ascoli, after passing to a subsequence, we can assume that the vn converge uniformly towards some v0 ∈ C 0 (B(0, ρ)) with v0 C 0 (B(0,ρ0 )) = 1. But (3.5.33) would imply v0 L2 (B(0,ρ0 )) = 0, hence v ≡ 0, a contradiction. It remains to consider the case where the ρn tend to ∞. In that case, we use (3.5.33) to choose points xn ∈ B(0, ρn ) with |vn (xn )| ≥

1 1 vn C 0 (B(0,ρn )) = . 2 2

(3.5.34)

We then consider wn (x) := vn (x + xn ) so that wn (0) ≥ 12 while (3.5.33) holds for wn on some ﬁxed neighborhood of 0. We then apply the Arzela-Ascoli argument to the wn to get a contradiction as before. b) is proved in the same manner. The crucial point now is that for a sequence vn for which the norms vn C 1,α are uniformly bounded, both the

vn and their ﬁrst derivatives are equicontinuous. Lemma 3.5.2 a) For ε > 0, there exists M (ε) (< ∞) such that for all u ∈ C 1 (B(0, 1)) uC 0 (B(0,1)) ≤ ε uC 1 (B(0,1)) + M (ε) uL2 (B(0,1))

(3.5.35)

for all u ∈ C 1,α . For ε → 0, M (ε) ≤ const. ε−d .

(3.5.36)

b) For every α ∈ (0, 1) and ε > 0, there exists N (ε) (< ∞) such that for all u ∈ C 1,α (B(0, 1)) uC 1 (B(0,1)) ≤ ε uC 1,α (B(0,1)) + N (ε) uL2 (B(0,1))

(3.5.37)

for all u ∈ C 1,α . For ε → 0, N (ε) ≤ const. ε−

d+1 α

.

(3.5.38)

116

3 Harmonic Maps

c) For every α ∈ (0, 1) and ε > 0, there exists Q(ε) (< ∞) such that for all u ∈ C 2,α (B(0, 1)) uC 1,α (B(0,1)) ≤ ε uC 2,α (B(0,1)) + Q(ε) uL2 (B(0,1))

(3.5.39)

for all u ∈ C 1,α . For ε → 0,

Proof.

Q(ε) ≤ const. ε−d−1−α .

(3.5.40)

x uρ (x) := u( ), uρ : B(0, ρ) → R. ρ

(3.5.41)

We rescale:

(5.3.35) then is equivalent to uρ C 0 (B(0,ρ)) ≤ ερ uρ C 1 (B(0,ρ)) + M (ε)ρ−d uL2 (B(0,ρ)) .

(3.5.42)

We choose ρ such that ερ = 1, that is, ρ = ε−1 and apply a) of Lemma 3.5.1. This shows (3.5.42), and a) follows. For b), we shall show DuC 0 (B(0,1)) ≤ ε |Du|C α (B(0,1)) + N (ε) uL2 (B(0,1)) .

(3.5.43)

Combining this with a) then shows the claim. We again rescale by (3.5.41). This transforms (3.5.43) into Duρ C 0 (B(0,ρ)) ≤ ερα |Du|C α (B(0,ρ)) + N (ε)ρ−d−1 uL2 (B(0,ρ)) . (3.5.44) We choose ρ such that ερα = 1, that is, ρ = ε− α and apply a) of Lemma 3.5.1. This shows (3.5.44) and completes the proof of b). c) is proved in the same manner.

1

We now continue the proof of Theorem 3.5.2: For homogeneous polynomials p(t), q(t), we deﬁne A1 := sup p(R − r) uC 1,α (B(0,r)) , 0≤r≤R

A2 := sup q(R − r) uC 2,α (B(0,r)) . 0≤r≤R

For the proof of a), we choose R1 so that A1 ≤ 2 p(R − R1 ) uC 1,α (B(0,R1 )) ,

(3.5.45)

while, for the proof of b), we choose it so that A2 ≤ 2 q(R − R1 ) uC 2,α (B(0,R1 )) .

(3.5.46)

(In general, the R1 of (3.5.45) will not be the same as that of (3.5.46).) By (3.5.29) and (3.5.37), we have, for certain constants c3 , c4 , . . . ,

3.5 The C α Regularity Theory

117

A1

≤ c3 p(R − R1 ) ∆ uC 0 (B(0,R2 )) +

ε uC 1,α (B(0,R2 )) (R2 − R1 )2

1 N (ε) uL2 (B(0,R2 )) (R2 − R1 )2 ε p(R − R1 ) · ≤ c4 · A1 + c5 p(R − R1 ) ∆ uC 0 (B(0,R2 )) p(R − R2 ) (R2 − R1 )2 p(R − R1 ) +c6 N (ε) uL2 (B(0,R2 )) . (R2 − R1 )2 +

We choose R2 =

R+R1 2

∈ (R1 , R). Then, because p is homogeneous, p(R − R1 ) p(R − R1 ) = 1 p(R − R2 ) p( R−R 2 )

is independent of R and R1 . Thus, ε=

(R2 − R1 )2 p(R − R1 ) ∼ (R − R1 )2 2c4 p(R − R2 )

and

N (ε) ∼ (R − R1 )−

2(d+1) α

by Lemmma 3.5.2 b). Thus, when we choose p(t) = t

2(d+1) +2 α

,

the coeﬃcient of uL2 (B(0,R2 )) in (3.5.47) is controlled. Thus we have ﬁnally 1 A1 (3.5.47) p(R − r) ≤ const. ∆ uC 0 (B(0,R)) + uL2 (B(0,R)) ,

uC 1,α (B(0,r)) ≤

where the constant now depends on the radii r and R as well. In exactly the same way, one deduces from (3.5.30) and (3.5.39) that (3.5.48) uC 2,α (B(0,r)) ≤ const. ∆ uC α (B(0,R)) + uL2 (B(0,R)) for 0 < r < R. Since ∆ u = f , we have thus proved (3.5.19) and (3.5.20) in the case u ∈ C 2,α . In the case of a general u ∈ H 1,2 (Ω), we again consider the smoothings uh , 0 < h < dist(Ω0 , ∂Ω), as in § 3.1. Since D uh · D v = − fh v for all v ∈ H01,2 (Ω), Ω

Ω

and the uh are C ∞ functions, we have

118

3 Harmonic Maps

∆ uh = fh . By Lemma 3.1.5, fh − f C 0 −→ 0 if f ∈ C (Ω). Thus the fh have the Cauchy property in C 0 (Ω) (resp. C α (Ω)), and it follows from (3.5.19) (resp. (3.5.20)) applied to uh1 − uh2 that the uh have the Cauchy property in C 1,α (Ω0 ) (resp. C 2,α (Ω0 )). Hence their limit u also lies in C 1,α (Ω0 )

(resp. C 2,α (Ω0 )) and satisﬁes (3.5.19) (resp. (3.5.20)). α

For later use, we record the following sharpening of a) of the above theorem: Theorem 3.5.3 Let u be a weak solution of ∆ u = f in Ω, where f ∈ Lp for a p > d. Then u ∈ C 1,α (Ω) for an α depending only on p and d. Also, for every Ω0 ⊂⊂ Ω, we have uC 1,α (Ω0 ) ≤ const. f Lp (Ω) + uL2 (Ω) . Proof.

We again consider the Newtonian potential w(x) := G(x − y) f (y) dy. Ω

Let i

v (x) := Ω

xi − y i f (y) dy. |x − y|d

By H¨ older’s inequality, |v i (x)| ≤ f Lp (Ω) Ω

(p−1) p

1 |x − y|

(d−1)p (p−1)

dy

,

∂ i and this is ﬁnite since p > d. One can then show that ∂x i w = v , and derive the H¨ older estimate as in the proof of Theorems 3.5.1 a) and 3.5.2 a).

Corollary 3.5.1 If u ∈ W 1,2 (Ω) is a weak solution of ∆ u = f with f ∈ C k,α , then u ∈ C k+2,α (Ω), (k ∈ N), and uC k+2,α (Ω0 ) ≤ const. f C k,α (Ω) + uL2 (Ω) for all Ω0 ⊂⊂ Ω. If f is C ∞ in Ω, so is u. Proof. Since u ∈ C 2,α (Ω) by Theorem 3.5.2, Di u ∈ W 1,2 (Ω) and is a weak solution of ∆ Di u = Di f. Hence Di u ∈ C 2,α (Ω) by Theorem 3.5.2 (i = 1, . . . , d). Thus u ∈ C 3,α (Ω), and the theorem follows by induction.

3.6 Deﬁnition and Simple Properties of Harmonic Maps

119

Exercises for § 3.5 ∗

1)

Let 0 ≤ α < β ≤ 1. Show that the embedding C β (Ω) → C α (Ω)

2)

3)

is compact, i.e. a sequence which is bounded in C β contains a subsequence converging in C α . Let 0 ≤ α < β ≤ γ ≤ 1. Show that for each ε > 0 there exists N (ε) < ∞ with uC β (Ω) ≤ ε uC γ (Ω) + N (ε) uC α (Ω) for all u ∈ C γ (Ω). Determine the growth behavior of N (ε) as ε → 0. Use 1) and the reasoning in the proof of (3.5.37). Formulate and prove a general result replacing C γ (Ω), C β (Ω), C α (Ω) by Banach spaces B1 , B2 , B3 with embeddings B3 → B2 → B1 satisfying appropriate conditions. (The result is called Ehrling’s lemma.) Carry out the proof of Thm. 3.5.3 in detail.

3.6 Maps Between Surfaces. The Energy Integral. Deﬁnition and Simple Properties of Harmonic Maps Let Σ1 and Σ2 be Riemann surfaces; suppose Σ2 carries a metric, given in local coordinates by 2 (u) du du. Let z = x + iy be a local conformal parameter on Σ1 . Now let u : Σ1 → Σ2 be a map, of class C 1 to start with. We deﬁne the energy integral of u as i 2 (u) (uz uz + uz uz ) dz dz E(u) := 2 Σ1 1 2 (u(z)) (ux ux + uy uy ) dx dy (3.6.1) = 2 Σ1 (uz := 12 (ux − iuy ), uz := derivatives.)

1 2

(ux + iuy ), etc. , subscripts denoting partial

Lemma 3.6.1 E(u) is independent of the choice of conformal parameters on Σ1 and Σ2 . Proof. If z(w) is a conformal change of parameters on Σ1 , and we set u

(w) := u(z(w)), then

120

3 Harmonic Maps

2 (

u(w)) u

w u

w + u

w u

w i dw dw 2 u(z) (uz uz zw z w + uz uz z w zw )

= =

i dz dz z w zw

2 (u(z)) (uz uz + uz uz ) i dz dz.

Similarly, for a change of parameters u → v(u), the transformed metric is given by dv dv , 2 (u(z)) uv uv dv dv = 2 (v(u)) vu v u

hence the invariance of the energy is easily veriﬁed.

Deﬁnition 3.6.1 Let Σ , Σ be Riemann surfaces. A holomorphic map f : Σ → Σ is called conformal if its derivative fz is nonzero everywhere on Σ . Likewise, an antiholomorphic map with nonvanishing derivative is called anticonformal. From the proof of the above lemma, we also have: Corollary 3.6.1 If k : Σ1 → Σ1 is bijective and conformal, then E(u) = E(u ◦ k).

(3.6.2)

Lemma 3.6.2 For u : Σ1 → Σ2 as before, we have E(u) ≥ Area (Σ2 ) , with equality iﬀ u is conformal or anticonformal. Proof. 2 (u) (uz uz + uz uz )

E(u) = Σ1

≥

2 (u) uz uz Σ1

≥

2 (u) Σ2

i dz dz 2

i dz dz, 2

i du du, 2

with equality iﬀ u is holomorphic

with equality iﬀ u is of degree 1

= Area (Σ2 ) .

The anticonformal case is handled similarly.

Suppose now that u : Σ1 → Σ2 is a map which carries the coordinate neighbourhood V of Σ1 into the coordinate neighbourhood U of Σ2 . Then we can check whether the restriction u : V → U lies in W 1,2 or not. If U and

3.6 Deﬁnition and Simple Properties of Harmonic Maps

121

V are bounded, as we shall assume, then u : V → U is bounded, hence in L2 if it is measurable. To say that u ∈ W 1,2 is then equivalent to requiring that u have weak derivatives Dz u, Dz u, Dz u and Dz u on V , and the integral 1 E(u, V ) := 2 (u(z)) (Dz u Dz u + Dz u Dz u) i dz dz (3.6.3) 2 V be ﬁnite. In particular, we can deﬁne the class C 0 ∩ W 1,2 (Σ1 , Σ2 ), since small coordinate neighbourhoods are mapped into coordinate neighbourhoods by continuous maps. We can then also talk of the weak W 1,2 -convergence of a sequence of continuous maps Σ1 → Σ2 of class W 1,2 .4 Lemma 3.6.3 Suppose the sequence (un )n∈N in C 0 ∩ W 1,2 (Σ1 , Σ2 ) converges weakly in W 1,2 , and uniformly (i.e. in C 0 ) to u. Then E(u) ≤ lim inf E(un ). n→∞

Proof.

(3.6.4)

We may compute in local coordinates. Thus

0 2 ≤ (un (z)) Dz (un − u) Dz (un − u) + Dz (un − u) Dz (un − u) i dz dz = 2 (un ) (Dz un · Dz un + Dz un · Dz un ) i dz dz + 2 (un ) (Dz u · Dz u + Dz u · Dz u) i dz dz − 2 (un ) Dz un · Dz u + Dz un · Dz u + Dz un · Dz u + Dz un · Dz u i dz dz. The ﬁrst integral above is E(u n ), and the second converges to u uniformly. We write the third integral 2 (un )(. . .) i dzdz as 2 2 (u) (. . .) i dz dz + (un ) − 2 (u) (. . .) i dz dz and observe that 2 2 (un ) − (u) (. . .) dz dz 2 2 ≤ sup (un (z)) − (u(z)) · (. . .) dz dz z∈Σ 1

4

It is possible to formulate the notion of W 1,2 −maps without requiring continuity. However, this is not necessary for our purposes.

122

3 Harmonic Maps

which tends to zero because of uniform convergence. Finally, because (un ) converges to u weakly in W 1,2 , 2 (u) Dz un · Dz u + Dz u · Dz u + Dz un · Dz u + Dz un · Dz u i dz dz converges to 2 2 (u) ( Dz u · Dz u + Dz u · Dz u ) i dz dz = 2 E(u). Thus we conclude that 0 ≤ lim inf E(un ) − E(u), n→∞

which is the assertion of the lemma.

In analogy with the Dirichlet principle, we shall now try to look for minima of E(u). If u is such a minimum which is continuous, then, in local co-ordinates, a variation ut of u can be represented as u + t ϕ,

ϕ ∈ C 0 ∩ W01,2 (Σ1 , Σ2 ).

If u is to be a minimum, we must have d E(u + tϕ) = 0, dt t=0 i.e. d 0= dt

(3.6.5)

2 (u + tϕ) (u + tϕ)z (u + tϕ)z

+(u + tϕ)z (u + tϕ)z i dz dz t=0 = 2 (u) (uz ϕz + uz ϕz + uz ϕz + uz ϕz ) +2 (u ϕ + u ϕ) (uz uz + uz uz )

If we set ϕ=

ψ , 2 (u)

i dzdz.

3.6 Deﬁnition and Simple Properties of Harmonic Maps

123

this becomes 2ψ (u uz + u uz ) uz ψ z − 2ψ (u uz + u uz ) +uz ψz − 2ψ (u uz + u uz ) +uz ψz − 2ψ (u uz + u uz ) +uz ψ z − 2 u ψ + u ψ (uz uz + uz uz ) i dz dz + 2u uz uz ψ i dz dz = 2 Re uz ψ z − 2u u z ψz − uz uz ψ i dz dz. +2 Re

0=

If u ∈ C 2 , we can integrate by parts in (3.6.6) to get 2u uz uz ψ i dz dz 0 = Re uzz + 2u uzz + uz uz ψ i dz dz +Re 2u uz uz ψ i dz dz. = 2 Re uzz +

(3.6.6)

(3.6.7)

Deﬁnition 3.6.2 A map u ∈ C 2 (Σ1 , Σ2 ) is called harmonic if uzz +

2u uz uz = 0.

(3.6.8)

A map u ∈ C 0 ∩ W 1,2 (Σ1 , Σ2 ) is called weakly harmonic if, for all ψ ∈ C 0 ∩ W01,2 (Σ1 , Σ2 ), 2u uz ψ z − uz uz ψ i dz dz = 0. (3.6.9) Corollary 3.6.2 If u ∈ C 0 ∩ W 1,2 (Σ1 , Σ2 ) is a minimum for E, then u is weakly harmonic. If u ∈ C 2 is a minimum of E, then u is harmonic. Proof. Observe ﬁrst that the two integrals in (3.6.6) are complex conjugates of each other. Indeed, since is real, u = u . And uz ψ z = − u ψ zz = − u ψzz = uz ψz

124

3 Harmonic Maps

for ψ ∈ C02 . It follows by approximation that uz ψ z = uz ψz for ψ ∈ W01,2 , proving the statement made above. Thus, by what we have already seen above, we must have 2u uz uz ψ i dz dz = 0 Re uz ψ z − for a continuous minimum u of E. By replacing ψ by −i ψ we see that the imaginary part of the above integral must also vanish, so that (3.6.9) holds. Suppose now that u is actually in C 2 . If e.g. 2u uzz + uzz (z0 ) =: ω(z0 ) = 0, then we would have, by continuity, a neighbourhood U of z0 on which Re ω > 0. Then we could choose ψ ∈ C0∞ (U ) with ψ ≥ 0 and ψ(z0 ) > 0, and then 2u uz uz ψ i dz dz > 0, Re uzz + in contradiction to (3.6.7).

Lemma 3.6.4 Under changes of conformal parameters on the source Σ1 , (3.6.8) and (3.6.9) are invariant. In particular, if u : Σ1 → Σ2 is harmonic and k : Σ1 → Σ1 is conformal, then u ◦ k : Σ1 → Σ2 is harmonic; similarly for weakly harmonic maps. In particular, conformal maps are harmonic. Proof.

By straight-forward veriﬁcation.

Remark. It should be noted however that, if u : Σ1 → Σ2 is harmonic and ˘eed n ˘ot in general be harmonic (except when h : Σ2 → Σ2 is conformal, h◦u n u is actually conformal). Indeed, in order to ensure that h ◦ u satisﬁes the diﬀerential equation (3.6.6), one would have to transfer the metric 2 (u) to Σ2 by means of h. Thus (3.6.8) and (3.6.9) are invariant only under ˘isometries h : Σ2 → Σ2 . This should not be confused with the statement of Lemma 3.6.1, because there we have also transformed the metric of the image so that the conformal parameter change became an isometry. Finally, let us once again point out that Σ1 and Σ2 enter asymmetrically in the deﬁnition of (weakly) harmonic maps, in the sense that Σ1 need carry only a conformal structure, whereas Σ2 must be equipped with a metric as well.

Exercises for § 3.6 1)

Write the equation for harmonic maps u : Σ1 → H down explicitly, where H is the upper half plane equipped with the hyperbolic metric.

3.7 Existence of Harmonic Maps

125

3.7 Existence of Harmonic Maps The aim of this section is to prove: Theorem 3.7.1 Let Σ1 and Σ2 be compact Riemann surfaces, with Σ2 being a quotient of the hyperbolic plane H as explained in Sec. 2.4 and carrying the hyperbolic metric, and let v : Σ1 → Σ2 be a continuous map. Then v is homotopic to a harmonic map u : Σ1 → Σ2 which minimizes the energy in its homotopy class. In fact, in the present section, we shall only show the existence of a weakly harmonic map u. The smoothness of u will then be veriﬁed in the next section. The proof of the theorem presented here can also be carried over to the general case of a metric of non-positive curvature on Σ2 . As an exercise, the reader may carry out the proof in the (considerably simpler) case of vanishing curvature. With small modiﬁcations, the proof even works for an arbitrary compact Riemann surface Σ2 which is not homeomorphic to S 2 . The following lemma (the Courant-Lebesgue lemma) will play an important role in the proof: Lemma 3.7.1 Let Ω be a domain in C, Σ a surface with a metric, and E(u) ≤ K. √ Let √z0 ∈ Ω, and r ∈ (0, 1), with B(z0 , r) ⊂ Ω. Then there exists a δ ∈ (r, r) such that, for all z1 , z2 ∈ ∂B(z0 , δ), u ∈ W 1,2 (Ω, Σ),

− 12 1 . d(u(z1 ), u(z2 )) ≤ (8πK) log r 1 2

(3.7.1)

(Here, d(· , ·) denotes the distance with respect to the metric on Σ.) We shall later apply this lemma only in the case when u is in addition Lipschitz continuous. In the general case when u is only of class W 1,2 , one needs Lemma 3.2.4 which says that u∂B(z , ) is absolutely continuous for almost 0 all , and hence the integral of its derivative. If u is Lipschitz continuous, then this holds for every , as is well-known. Proof of Lemma 3.7.1. We introduce polar coordinates (, θ) with center z0 in Ω. Then, for z1 , z2 ∈ ∂B(z0 , δ), we have d (u(z1 ), u(z2 )) ≤ (u(δ , ·)) 2π ∂u (δ, θ) dθ, = (u) ∂θ 0

(3.7.2)

126

3 Harmonic Maps

where 2 (u) du du is the metric given on Σ. If u is Lipschitz continuous, this holds for all δ 5 as already noted. In the general case of u ∈ W 1,2 , it holds for almost all δ, which is all that is needed in the rest of the proof, by Lemma 3.2.4. The Schwarz inequality applied to (3.7.2) gives d (u(z1 ), u(z2 )) ≤ (u(δ , ·)) 1 ≤ (2π) 2

2π

0

2 ∂u 2 (u) δθ ∂θ

(3.7.3)

12 .

√ r) is given in polar coordinates by 2 √r ∂u 2 1 ∂u 2 s ds dθ. (u) + 2 ∂s s ∂θ s=0

Now the energy integral of u over B(z0 , √

1 E(u, B(z0 , r)) = 2

2π

θ=0

√ Hence there exists a δ ∈ (r, r) such that 0

2π

2 √ ∂u 2 E (u; B(z0 , r)) √ 2 (u) (δ , θ) dθ ≤ r ds ∂θ r

s

4 E (u; B(z0 , = log 1r

√

r))

(3.7.4) ≤

4K . log 1r

The lemma follows from (3.7.3) and (3.7.4).

We remark that a similar assertion is valid for real-valued functions u : Ω → R whose Dirichlet integrals are majorised: |∇ u|2 ≤ K. Ω

Of course, the d (u(z1 ), u(z2 )) in (3.7.1) is to be replaced by |u(z1 ) − u(z2 )|. The proof is the same. We need some more preparations for the proof of Theorem 3.7.1: Let π : D → Σ2 be the universal covering – recall that Σ2 is assumed to be carrying the hyperbolic metric, so that D is the unit disc. Let s > 0 be so small that, for every p ∈ Σ2 , B(p, 3s) := { q ∈ Σ2 : d(p, q) ≤ 3s } can be lifted to a disc in D (with respect to π). Let 0 < η < s. We choose a Lipschitz map ση : [0, 3s] −→ [0, η] 5

For then the curve u(δ , ·) is rectiﬁable, and of course joins u(z1 ) and u(z2 ).

3.7 Existence of Harmonic Maps

127

such that 0≤t≤η ση (t) = t, 3η − t , η ≤ t ≤ 3η ση (t) = 2 ση (t) = 0, 3η ≤ t ≤ 3s.

(3.7.5)

For any p ∈ Σ2 , we introduce polar coordinates (t, ϕ) in B(p, 3s) (using the geodesics starting from p as radial lines from p; since B(p, 3s) lifts to a disc in D, this can also be done in D). Deﬁne now (for any η ∈ (0, s)) σp,η : Σ2 → B(p, η) by (t, ϕ) ∈ B(p, 3s), σp,η (t, ϕ) = (ση (t), ϕ) , σp,η (q) = p, q ∈ Σ2 \B(p, 3s). Thus σp,η is a C 1 map of Σ2 into B(p, η) which is the identity on B(p, η), “folds back” B(p, 3η)\B(p, η) into B(p, η) and maps Σ2 \B(p, 3η) to the single point p. Lemma 3.7.2 Let Ω ⊂⊂ C, v a Lipschitz map from Ω to Σ2 , p ∈ Σ2 and η ∈ (0, s), with s as above. Then E (σp,η ◦ v) ≤ E(v),

(3.7.6)

with strict inequality, unless σp,η ◦ v ≡ v. Proof. Since σp,η and v are Lipschitz maps, so is σp,η ◦ v. Since B(p, 3s) lifts to a disc in D and σp,η is constant outside B(p, 3s), we may without loss of generality think of v as a map to D (rather than Σ2 )6 . To aid geometric visualisation, we may after an isometry of D assume that p = 0 ∈ D. 4 Now the hyperbolic metric on D is given by 2 (v) = (1−|v| 2 )2 , and we compute, using the chain rule (cf. Lemma 3.2.3): ∂ ∂ ∂ ∂ 2 (σ0,η (v)) (σ0,η ◦ v) · (σ0,η ◦ v) + ( σ0,η ◦ v) · (σ0,η ◦ v) ∂z ∂z ∂z ∂z ∂ ∂ ∂ ∂ 4 2 v · v · sup |grad σ · | v + v ≤ 0,η 2 ∂z ∂z ∂z ∂z (1 − ση (|v|)2 ) ∂ ∂ 4 ∂ ∂ v· v· ≤ v+ v . 2 2 ∂z ∂z ∂z ∂z (1 − |v| ) since |grad σ0,η | ≤ 1 (cf. (3.7.5)) and ση (|v|) ≤ |v| < 1. Integration of this inequality yields (3.7.6).

6

We may obviously assume that Ω is simply connected, and then v always lifts to D by Theorem 1.3.3.

128

3 Harmonic Maps

By the same argument, one can also prove: Lemma 3.7.3 Let p, s and η < s be as above. Then, for any curve γ in Σ2 , of length (γ), (3.7.7) (σp,η (γ)) ≤ (γ), with strict inequality unless σp,η (γ) ≡ γ. Now let v : Σ1 → Σ2 be a Lipschitz continuous map. Cover Σ1 by coordinate neighbourhoods. Choose R0 < 1 so that, for every z0 ∈ Σ1 , a disc of the form B(z0 , R0 ) := {z : |z − z0 | ≤ R0 } is contained inside a coordinate neighbourhood. Assume E(v) ≤ K

(3.7.8)

and deﬁne, for r > 0, ψ(r) := 4 (πK)

1 2

log

1 r

− 12 .

(3.7.9)

Choose R1 , 0 < R1 ≤ R0 such that ψ(R1 ) < s,

(3.7.10)

with an s as speciﬁed earlier. Finally, choose a dense sequence ((zn , rn )) in {(z, r) : z ∈ Σ1 , r ≤ R1 }. √ By Lemma 3.7.1, there exists a δ1 ∈ (r1 , r1 ) such that (3.7.11) v ∂B(z1 , δ1 ) ≤ η1 , so that, in particular, v ( ∂B(z1 , δ1 ) ) ⊂ B(p1 , η1 ),

(3.7.12)

where ξ1 is any point in ∂B(z1 , δ1 ), p1 := v(ξ1 ), and η1 satisﬁes η1 ≤ ψ(r1 ) < s. We deﬁne now a map v1 : Σ1 → Σ2 by v(z), z ∈ Σ1 \B(z1 , δ1 ) v1 (z) := σp1 ,η1 (v(z)), z ∈ B(z1 , δ1 ). Then v1 is again Lipschitz continuous, and E(v1 ) ≤ E(v) ≤ K by Lemma 3.7.2 (cf. (3.7.8)).

(3.7.13)

3.7 Existence of Harmonic Maps

129

Further, for any w1 , w2 ∈ Σ1 and any rectiﬁable curve g joining w1 and w2 , d (v1 (w1 ), v1 (w2 )) ≤ (v1 (g)) ≤ (v(g))

(3.7.14)

by Lemma 3.7.3. Finally, we have by construction v1 (B(z1 , δ1 )) ⊂ B(p1 , η1 ). √ For the next step, we ﬁrst ﬁnd δ2 ∈ (r2 , r2 ) such that v1 ∂B(z2 , δ2 ) ≤ η2 ,

(3.7.15)

(3.7.16)

in particular v1 (∂B(z2 , δ2 )) ⊂ B(p2 , η2 ),

(3.7.17)

where p2 := v1 (ξ2 ), with ξ2 an arbitrarily ﬁxed point of ∂B(z, δ2 ), and η2 ≤ ψ(r2 ) < s. We want now to construct a map v2 such that v2 (B(z1 , δ1 )) ⊂ B(q1 , η1 )

(3.7.18)

(for some q1 ∈ Σ2 ) and also v2 (B(z2 , δ2 )) ⊂ B(q2 , η2 )

(3.7.19)

(for some q2 ∈ Σ2 ). To do this, we set v1,1 := v and z ∈ Σ1 \B(z2 , δ2 ) v1,1 (z), v1,2 (z) := σp2 ,η2 (v1,1 (z)), z ∈ B(z2 , δ2 ). (If ∂B (z1 , δ1 ) ∩ ∂B(z2 , δ2 ) = ∅, then v1,2 already has the desired properties; but v1,2 may not satisfy (3.7.18) if this intersection is non-empty.) Set p1,2 := v1,2 (ξ1 ). Then, since v1,2 ∂B(z1 , δ1 ) ≤ v1 ∂B(z1 , δ1 ) ≤ η1 , we have v1,2 (∂B(z1 , δ1 )) ⊂ B(p1,2 , η1 ). We deﬁne

v1,2 (z), v1,3 (z) := σp1,2 ,η1 (v1,2 (z)),

z ∈ Σ1 \B(z1 , δ1 ), z ∈ B(z1 , δ1 ),

and set p2,3 := v1,3 (ξ2 ).

130

3 Harmonic Maps

Then v1,3 (∂B(z2 , δ2 )) ⊂ B(p2,3 , η2 ). Thus we can deﬁne

v1,3 (z), σp2,3 ,η2 (v1,3 (z)),

v1,4 (z) :=

z ∈ Σ1 \B(z2 , δ2 ) z ∈ B(z2 , δ2 )

and iterate this process. The v1,n coincide on Σ1 \ (B(z1 , δ1 ) ∩ B(z2 , δ2 )) for all n ≥ 3, whereas, for a z ∈ B(z1 , δ1 ) ∩ B(z2 , δ2 ), the image point is alternately subjected to the transformations σp1,n ,η1 and σp2,n+1 ,η2 . Let ξ0 ∈ ∂B(z1 , δ1 ) ∩ ∂B(z2 , δ2 ). The image of ξ0 is the same under all the v1,n . If v1,n+1 (z) = v1,n (z), then d (v1,n+1 (z), v1,n+1 (ξ0 )) < d (v1,n (z), v1,n (ξ0 )) ,

(3.7.20)

as follows immediately from the properties of the maps σp,η . The maps v1,n are all Lipschitz continuous with the same bound on the Lipschitz constant. Namely, for all w1 , w2 ∈ Σ and an arbitrary path g joining w1 and w2 , we have by Lemma 3.7.3 d (v1,n (w1 ), v1,n (w2 )) ≤ (v1,n (g)) ≤ (v(g)) .

(3.7.21)

Since v is Lipschitz continuous, we can choose g so that (v(g)) ≤ const. |w1 − w2 |.

(3.7.22)

By the Arzel`a-Ascoli theorem, a subsequence (v1,nk ) then uniformly converges to some map v2 , and v2 has to satisfy the same Lipschitz bound. Let i = 1, 2. qi := lim v1,nk (ξi ), nk →∞

We now claim that v2 (z)

:=

v2 (z), σq1 ,η2 (v2 (z)),

z ∈ Σ1 \(z1 , δ1 ) z ∈ B(z1 , δ1 ),

as well as the analogously deﬁned map v2 , must coincide with v2 . If not, there exists some z with d (v2 (z), v2 (ξ0 )) − d (v2 (z), v2 (ξ0 )) = ε > 0, again by Lemma 3.7.3. Let us assume that the nk are all even. It then easily follows that (v1,nk +1 ) converges to (v2 ) for nk → ∞. (If the nk were all odd, (v1,nk +2 ) would converge to (v2 ), and the argument in the sequel would be analogous.) We then get for all suﬃciently large nk | d (v2 (z), v2 (ξ0 )) − d (v1,nk (z), v1,nk (ξ0 )) | <

ε 3

3.7 Existence of Harmonic Maps

and

131

ε . 3 The preceding relations and the monotonicity property (3.9.20) then imply d (v2 (z), v2 (ξ0 )) − d v1,n (z), v1,n (ξ0 ) > ε k+1 k+1 3 for all suﬃciently large nk . This, however, is not compatible with the uniform convergence of (v1,nk ) to v2 . This shows that v2 , and likewise v2 , coincides with v2 . Thus, v2 satisﬁes (3.7.18) and (3.7.19). We already observed that the v1,n are equi-continuous, hence their convergence to v2 is uniform. Further, the v1,n are all mutually homotopic, hence also homotopic to the map v from which we started. Indeed, v1,n arises from v1,n−1 through modiﬁcation on the interior of a disc B(z, δ). By Theorem 1.3.1, every map f : B(z, δ) → Σ2 can be lifted to a map f : B(z, δ) → D, and any two such maps which agree on ∂B(z, δ) are homotopic via maps which preserve the boundary values. (This argument uses the topological structure of the universal covering of Σ2 ; it is no longer valid if Σ2 is S 2 .) We now can apply the following elementary lemma: | d (v2 (z), v2 (ξ0 )) − d (v1,nk +1 (z), v1,nk +1 (ξ0 )) | <

Lemma 3.7.4 Let (wn ) be a sequence of mutually homotopic maps Σ1 → Σ2 , converging uniformly to a map w. Then w is homotopic to the wn . Proof. We choose ε > 0 such that, for any p1 , p2 ∈ Σ2 with d(p1 , p2 ) < ε, there exists a unique shortest (hence geodesic) path γp1 ,p2 joining p1 to p2 : γp1 ,p2 : [0, 1] → Σ2 ,

γp1 ,p2 (0) = p1 ,

γp1 ,p2 (1) = p2 .

(This is clear in our special case of a hyperbolic metric. Note, however, that the result also holds for arbitrary metrics by Cor. 2.3.A.1) By the uniqueness, γp1 ,p2 depends continuously on p1 , p2 if d(p1 , p2 ) < ε, since the limit of a sequence of shortest paths is again the shortest path between its end-points. Also, we can parametrize the γp1 ,p2 in such a way that γp1 ,p2 (t) depends continuously on p1 , p2 and t. Now, since (wn ) converges uniformly to w, w is continuous, and there exists an N such that, for all n > N and z ∈ Σ1 , we have d(wn (z), w(z)) < ε. Then, for n > N , h(z, T ) := γwn (z),w(z) (t) deﬁnes a homotopy between wn and w.

Thus it follows that v2 is homotopic to v1 and v. We already noted that v2 is Lipschitz continuous. By Theorem 3.1.3, (v1,n ) also converges weakly in W 1,2 to v2 . Hence, by (3.7.13) and Lemmas 3.6.2 and 3.7.2, we have E(v2 ) ≤ lim inf E(v1,n ) ≤ E(v1 ) ≤ E(v) ≤ K. n→∞

(3.7.23)

By induction, we can then obtain maps vn : Σ1 → Σ2 with the following properties:

132

1) 2) 3) 4)

3 Harmonic Maps

vn is homotopic to v; vn (B(zi , ri )) ⊂ B(qi , ηi ) for all i ≤ n, for some qi ∈ Σ2 and an ηi ≤ ψ(ri ); E(vn ) ≤ E(v) ≤ K; (vn ) is equi-continuous.

By Theorem 3.1.3 and the Ascoli-Arzel` a theorem, it follows that a subsequence of (vn ) converges uniformly and weakly in W 1,2 to a map v , which (by Lemma 3.7.4) is homotopic to v. Further, E(

v ) ≤ E(v)

(3.7.24)

by Lemma 3.7.2. Also, since (zn , rn ) is dense in Σ1 × [0, R1 ], there exist, for every z ∈ Σ1 and r ∈ (0, R1 ), a q ∈ Σ2 and an η with η ≤ ψ(r) < s

(3.7.25)

v (B(z, r)) ⊂ B(q, η).

(3.7.26)

such that

The important property of v , expressed by (3.7.26) and (3.7.25), is that we now have a bound depending only on K for the modulus of continuity of v , while E(

v ) ≤ E(v). We can now begin the proof of Theorem 3.7.1: Let (un )n∈N be an energy minimizing sequence in C 0 ∩ W 1,2 (Σ1 , Σ2 ) in the class of maps Σ1 → Σ2 homotopic to v 7 . This means that (3.7.27) E(un ) → inf E(w) : w ∈ C 0 ∩ W 1,2 (Σ1 , Σ2 ) homotopic to v as n → ∞. By an approximation argument (cf. Corollary 3.2.1), we may assume that all the un are Lipschitz continuous. By (3.7.27), we may also assume that (3.7.28) E(un ) ≤ K with a constant K independent of n. As above, we construct for each n a map u

n homotopic to un such that E(

un ) ≤ E(un ) ≤ K

(3.7.29)

and u

n has the property: for every z ∈ Σ1 and r ∈ (0, R1 ), there exist q ∈ Σ2 and η > 0 such that η ≤ ψ(r) (3.7.30) 7

Since the continuous map v can be approximated uniformly by C 1 maps (which are then homotopic to v by Lemma 3.9.4), there exist maps of ﬁnite energy in the homotopy class of v.

3.7 Existence of Harmonic Maps

133

and u

n (B(z, r)) ⊂ B(q, η).

(3.7.31)

Then the u

n are equicontinuous, hence have a subsequence converging uniformly to a map u : Σ1 → Σ2 , which is then homotopic to v (Lemma 3.7.4). By Theorem 3.1.3, we may (by passing to a further subsequence if necessary) assume that (

un ) converges weakly in W 1,2 . Now Lemma 3.6.3, together with (3.7.27) and (3.7.29) implies un ) E(u) ≤ lim inf E(

n→∞ ≤ inf E(w) : w ∈ C 0 ∩ W 1,2 homotopic to v .

(3.7.32)

Since u is homotopic to v, we must have equality in (3.7.32), hence u minimizes the energy in the homotopy class of v. Thus u is weakly harmonic (Corollary 3.6.2), and it remains to show that u is of class C 2 and hence harmonic. This will be achieved in the next section.

Exercises of § 3.7 1) ∗

2)

Prove an analogon of Thm. 3.7.1 in case Σ2 carries a metric with vanishing curvature. Let Σ be a compact Riemann surface with a hyperbolic metric, and let c : S 1 → Σ be continuous. Deﬁne the energy of c by ∂c ∂c 1 2 (c(t)) dt, E(c) := 2 ∂t ∂t where 2 (z) dzdz is the metric of Σ in local coordinates. Show that c is homotopic to a closed geodesic γ by ﬁnding a curve γ homotopic to c and minimizing the energy in its homotopy class, and proving that γ is parametrized proportional to arclength, i.e. 2 (c(t))

3)

∂c ∂c ≡ const., ∂t ∂t

and that γ is the shortest curve in its homotopy class. Can you prove this result also for more general metrics on Σ? (The diﬀerential equation for geodesics was derived in 2.3.A.) Can one use Lemma 3.7.1 to estimate the modulus of continuity of a Lipschitz continuous map f : Σ1 → Σ2 between Riemann surfaces with metrics in terms of its energy E(f )? (I.e., given ε > 0, can one compute δ > 0 in terms of E(f ) and the geometry of Σ1 and Σ2 , with d(f (z), f (z0 )) < ε whenever d(z, z0 ) < δ?) You may assume that Σ2 is hyperbolic, for simplicity.

134 ∗

4)

3 Harmonic Maps

Let Σ be a Riemann surface with oriented boundary curves γ1 , . . . , γk , and with a hyperbolic metric for which the curves γj , j = 1, . . . , k are geodesic. Let S be another Riemann surface with oriented boundary curves c1 , . . . , cl . Let φ : S → Σ be a continuous map, mapping each ci onto some γj(i) with prescribed orientation, i = 1, . . . l. Minimize the energy in the class of all such maps and obtain a harmonic map u. Note that we are n ˘ot solving a Dirichlet problem here. u only has to map each ci onto γj(i) with prescribed orientation, but otherwise the boundary map is free. Derive a necessary boundary condition for u to be a solution.

3.8 Regularity of Harmonic Maps In the preceding section, we have constructed a continuous weakly harmonic map u from a compact Riemann surface Σ1 into another one Σ2 that is a quotient of the hyperbolic plane H and equipped with the hyperbolic metric. In order to complete the proof of Theorem 3.7.1, we need to show that u is smooth. The smoothness question is local in nature, and it therefore suﬃces to consider a weakly harmonic map from a neighbourhood U of a given point z0 ∈ Σ1 to Σ2 . As explained in §§ 3.6, 3.7, by conformal invariance of the energy and after lifting to universal covers, we may therefore restrict our attention to a weakly harmonic map u : B(0, R) → H, where B(0, R) := {z ∈ C : |z| < R} is a disk in the complex plane. We recall the hyperbolic metric 1 dw dw =: 2 (w) dw dw (Im w)2 We need some preliminary computations. For a harmonic map u : B(0, R) → H that is assumed to be smooth for a moment, and a smooth function h : H → R, we wish to compute ∆ (h ◦ u). With subscripts denoting partial derivatives, we have 1 ∆ h ◦ u = 4 (h ◦ u)zz 4 = huu uz uz + huu (uz uz + uz uz ) + hu u uz uz +hu uzz + hu uzz

(3.8.1)

3.8 Regularity of Harmonic Maps

135

Since u is harmonic, i.e. uzz = − we obtain 1 ∆h ◦ u = 4

2u u z uz ,

(3.8.2)

2u huu − hu

uz uz + huu (uz uz + uz uz ) (3.8.3) 2u hu uz uz + huu −

We let d(· , ·) : H × H → R be the distance function deﬁned by the hyperbolic metric. We choose the function h(w) = d2 (w0 , w)

for w0 ∈ H.

(3.8.4)

By applying an isometry of H which, of course, leaves d(· , ·) invariant, we may assume that w0 = i and that w is on the imaginary axis with Im w ≥ 1. In that case, we have

|w|

d(i, w) = 1

1 dy = log |w| y

(using, e.g., Lemma 2.3.6). We then compute 1 2|w|2 2w 1 hw = − , 2w2

hww = hww

(3.8.5) hw w −

2w 1 hw = . 2w2

Inserting (3.8.5) into (3.8.2), we obtain from the Cauchy-Schwarz inequality ∆h ◦ u ≥ 0 (for h as in (3.8.4)). Thus h ◦ u is subharmonic. If u is only weakly harmonic, i.e. not necessarily smooth, an easy modiﬁcation of the preceding computations shows that h ◦ u then is weakly subharmonic, i.e. h ◦ u(z) ∆ ϕ(z) ≥ 0 for all C0∞ (B(0, R)). (3.8.6) B(0,R)

We recall this as Lemma 3.8.1 Let u be (weakly) harmonic, u : B(0, R) → H, and let, for w0 ∈ H, h(w) := d2 (w0 , w). Then h ◦ u is (weakly) subharmonic.

136

3 Harmonic Maps

Remark. More generally, a C 2 -function h ◦ u on a Riemann surface Σ with metric 2 (w) dwdw is called convex if the so-called covariant Hessian hww hww − 2

w hw hw w − 2

w hw hww is positive semideﬁnite. In the preceding argument, we have veriﬁed that in our case, (3.8.4) deﬁnes a convex function on H, and secondly that if u : B(0, R) → Σ is harmonic and h : Σ → R is convex, then h ◦ u is subharmonic. We need a slight generalization of the preceding computation. Namely, let u, v : B(0, R) → H be two harmonic maps, deﬁned by

h:H ×H →R

h w1 , w2 := d2 w1 , w2 ,

(3.8.7)

and consider

h ( u(z), v(z) ) as a function on B(0, R). As before, we have the general chain rule 2w (u(z))

1

∆ h ( u(z), v(z) ) = hw1 w1 − hw 1 w 1 h w 1 uz u z +

4 (u(z)) 2w (u(z))

(uz uz + uz uz ) + hw1 w1 − h 1 uz uz (u(z)) w +the same terms with w2 and v in place of w1 and u hw1 w2 (uz v z + uz v z ) +

hw1 w2 (uz vz + uz vz ) +

+hw1 w2 (uz vz + uz vz ) + hw1 w2 (uz v z + uz v z ) . (3.8.8) We may evaluate this expression as before. We may assume again that w1 and w2 are in special position, namely that they are both imaginary and Im w1 ≥ Im w2 ≥ 1. Then 2 1 |w | 2 1 2 1 2 dy = log |w1 | − log |w2 | . d (w , w ) = |w2 | y Thus 1 , 2w1 w2 2 = − 1 2, 2w w

1 2w1 w2 1 = − 1 2. 2w w

hw 1 w 2 = −

hw 1 w 2 = −

hw 1 w 2

hw 1 w 2

3.8 Regularity of Harmonic Maps

137

An application of the Cauchy-Schwarz inequality then shows that the mixed terms in (3.8.8) are controlled in absolute value by the sum of the remaining terms, and those are nonnegative by the computation leading to Lemma 3.8.1. We therefore have Lemma 3.8.2 Let u, v : B(0, R) → H be (weakly) harmonic. Then d2 ( u(z), v(z) )

is a (weakly) subharmonic function. As a consequence of Lemma 3.8.2, we obtain

Lemma 3.8.3 Let u : B(0, R) → H be a weakly harmonic map of ﬁnite energy. Then for all z0 , z1 ∈ B 0, R4 , d ( u(z0 ), u(z1 ) ) ≤ c1

|z0 − z1 | 1 E 2 (u) R

(3.8.9)

for some universal constant c1 . Proof. Let ξ := z1 − z0 . By a rotation of our coordinate system, we may assume that ξ is parallel to the ﬁrst coordinate axis. u(z) and u(z + ξ) both are harmonic maps on B 0, R2 . Therefore, by Lemma 3.8.2, d2 ( u(z), u(z + ξ) ) is a weakly subharmonic function of z. By Lemma 3.4.2 d2 ( u(z0 ), u(z1 ) ) = d2 ( u(z0 ), u(z0 + ξ) ) 4 d2 ( u(z), u(z + ξ) ) ≤ πR2 B(z0 , R2 )

(3.8.10)

By Lemma 3.2.4, u is absolutely continuous on almost all lines parallel to the ﬁrst corrdinate axis, and on such a line, we therefore have 2 z+ξ

d2 ( u(z), u(z + ξ) ) ≤

(u(x)) |D u(x)| dx z

z+ξ

≤ |ξ|

2

2 (u(x)) |D u(x)| dx

(3.8.11)

z

by H¨ older’s inequality. If we integrate this estimate w.r.t. z over B z0 , R2 , we obtain from (3.8.10) d2 ( u(z0 ), u(z1 ) ) ≤ which is (3.8.9).

c21 2 |ξ| E(u) R2

for some constant c1

138

3 Harmonic Maps

We may now derive: Theorem 3.8.1 Let u : Σ1 → Σ2 be a weakly harmonic map of ﬁnite energy between Riemann surfaces where Σ2 is covered by H and equipped with the corresponding hyperbolic metric. Then u is smooth. Proof. Let z0 ∈ Σ1 . We choose local conformal coordinates on a neighbourhood U of z0 such that U is represented by a disk B(0, R) ∈ C with z0 corresponding to 0. From Lemma 3.8.3 we know in particular that u is represented by a continuous map. By Lemma 3.2.6, the weak derivatives can be obtained as Di u(z) = lim

h→0

u(z + hei ) − u(z) h

for i = 1, 2,

where ei is the ith unit vector. From Lemma 3.8.3, we know that this limit is bounded as h → 0, and therefore |D u(z)| ≤ const.

(3.8.12)

R

for z ∈ B 0, 4 , with the constant depending on the energy of u. Since u is weakly harmonic, it satisﬁes in the weak sense ∆ u = −8

u uz uz

(3.8.13)

and (3.8.12) therefore implies ∆u = f

(3.8.14)

∞

with f ∈ L . From Thm. 3.5.3, we obtain that u has H¨ older continuous ﬁrst derivatives. Therefore, the right hand side of (3.8.13) is H¨ older continuous. By Thm. 3.5.2, u then has H¨ older continuous second derivatives. Therefore, the right hand side of (3.8.13) has H¨ older continuous ﬁrst derivatives. Iterating this argument as in the proof of Cor. 3.5.1, we obtain that u is smooth of class C ∞ .

3.9 Uniqueness of Harmonic Maps Before proceeding with the somewhat lengthy computations of this and the next section, we should like to orient the reader. In the present book, we do not develop the intrinsic calculus of diﬀerential geometry. That approach would facilitate the computations needed here and make them more transparent by clarifying their geometric content. The reason why we do not present that superior approach here is that it needs systematic preparations. These on one hand might take us a little too far away from our ultimate purpose of deriving Teichm¨ uller’s theorem and understand varying Riemann surfaces

3.9 Uniqueness of Harmonic Maps

139

and on the other hand are developed in [EJ] and [J3] to which we refer the interested reader. So, here we carry out all computations in local coordinates, and the geometry enters implicitly through the nonlinear terms that occur in those computations. Those terms reﬂect the curvature of the surface into which we map, or on which we consider geodesics (those are also conceived as maps from an interval or a circle into our surface). The fact that we consider hyperbolic surfaces, that is, ones with negative curvature, makes those nonlinear terms have the right sign for our inequalities. Therefore, the intuition underlying the computations is that we can transfer convexity arguments that are valid in Euclidean space to nonpositively curved Riemann surfaces. In fact, in some instances, when we only have (weak) convexity in the Euclidean situation, we get strict convexity in the presence of negative curvature. This leads to sharper uniqueness results for harmonic maps into hyperbolic Riemann surfaces than for ones into tori that carry a metric of vanishing curvature. We begin by computing the second variation of a (not necessarily harmonic) map u : Σ1 → Σ2 . (The ﬁrst variation was already computed in § 3.6.) In local coordinates, we consider a variation u(z) + ϕ(z, t) of u with ϕ(z, 0) ≡ 0. ∂ ∂2 ϕ, ϕ¨ := ∂t Then, setting ϕ˙ := ∂t 2 ϕ, we have d2 d2 2 (u + ϕ(t)) (u + ϕ(t))z (u + ϕ(t))z E(u + ϕ) = 2 2 dt dt t=0 i dz dz + (u + ϕ(t))z (u + ϕ(t))z 2 t=0 d 2 (u + ϕ) (u + ϕ)z ϕ˙ z + (u + ϕ)z ϕ˙ z = dt +(u + ϕ)z ϕ˙ z + (u + ϕ) ϕ˙ z z

=2

+2 u ϕ˙ + u ϕ˙ (u + ϕ)z (u + ϕ)z + (u + ϕ)z (u + ϕ)z i dz dz 2 t=0 1 2 ¨ z + uz ϕ¨z + uz ϕ¨z + uz ϕ ¨ z + 2 (u) ϕ˙ z ϕ˙ z + ϕ˙ z ϕ˙ z (u) uz ϕ 2 + u ϕ˙ + u ϕ˙ uz ϕ˙ z + uz ϕ˙ z + uz ϕ˙ z + uz ϕ˙ z + u ϕ˙ + u ϕ˙ u ϕ˙ + u ϕ˙ (uz uz + uz uz ) ¨ (uz uz + uz uz ) + uu ϕ˙ ϕ˙ + 2uu ϕ˙ ϕ˙ + uu ϕ˙ ϕ˙ + u ϕ¨ + u ϕ i dz dz 2

140

3 Harmonic Maps

(evaluated again at t = 0) =: I + II + III + IV + V . ¨ are no longer We now integrate the terms in I by parts so that ϕ¨ and ϕ diﬀerentiated (with respect to z or z), complete the terms in II to ( ϕ˙ z + ˙ thereby taking care of half the terms in III, and ˙ ( ϕ˙ z + 2u uz ϕ), 2u uz ϕ) 2 integrate the remaining terms in III, which are of the form u (ϕ˙ )z , by parts. This gives d2 =2 ¨ + uz ϕ¨ E(u + ϕ(t)) − (u uz + u uz ) uz ϕ 2 dt t=0 ¨ − 2 uzz ϕ ¨ + +uzz ϕ¨ − (u uz + u uz ) uz ϕ¨ + uz ϕ u u ϕ˙ z + 2 uz ϕ˙ +2 ϕ˙ z + 2 uz ϕ˙ u u ϕ˙ z + 2 uz ϕ˙ +2 ϕ˙ z + 2 uz ϕ˙ ˙ −4 (u u ) ϕ˙ ϕ(uz uz + uz uz ) 2 − [(u uz + u uz ) u uz + (uu uz + uu uz ) uz + u uzz ] ϕ˙ − [(u uz + u uz ) u uz + (uu uz + uu uz ) uz + u uzz ] ϕ˙ 2

− [(u uz + u uz ) u uz + (uu uz + uu uz ) uz + u uzz ] ϕ˙ 2

=2

2 − [(u uz + u uz ) u uz + (uu uz + uu uz ) uz + u uzz ] ϕ˙ 2 (uz uz + uz uz ) + u u ϕ˙ 2 + 2 u u ϕ˙ ϕ˙ + u u ϕ˙ ¨ + uu ϕ˙ 2 + 2 uu ϕ˙ ϕ˙ + uu ϕ˙ ϕ˙ + u ϕ¨ + u ϕ (uz uz + uz uz ) i dz dz u u 2 ˙ ˙ ϕ˙ z + 2 uz ϕ˙ ϕz + 2 u z ϕ u u 2 ˙ ˙ ϕz + 2 uz ϕ ϕ˙ z + 2 uz ϕ˙ + 2 +ϕ¨ − uzz − 2 u uz uz + ϕ˙ 2

(−2 u uzz − 2(u u + uu )uz uz ) ¨ −2 uzz − 2 u uz uz + ϕ˙ 2 +ϕ (−2 u uzz − 2(u u + uu )uz uz ) +2 ϕ˙ ϕ˙ ( uu − u u ) (uz uz + uz uz ) i dz dz. We recall now the formula for the curvature of the metric 2 du du (cf. Deﬁnition 2.3.4):

3.9 Uniqueness of Harmonic Maps

K = −∆ log = − i.e. K=−

141

4 ∂2 log , 2 ∂u∂u

4 ( uu − u u ) . 4

(3.9.1)

2 Thus, in the terms with ϕ˙ 2 and ϕ˙ above, we may replace uu by u u − 4 K 4 . We then get u u d2 2 ˙ ˙ u ϕ ˙ E(u + ϕ(t)) = 2 + 2 ϕ ˙ ϕ + 2 u ϕ z z z z dt2 t=0 u u +2 ϕ˙ z + 2 uz ϕ˙ ϕ˙ z + 2 uz ϕ˙ (3.9.2) K ˙ uz ϕ − uz ϕ˙ uz ϕ˙ − uz ϕ˙ −4 2 2 2u 2 uzz + uz uz − ϕ¨ + 2 u ϕ˙ 2u ¨ + 2 u ϕ˙ 2 u z uz uzz + i dz dz. − 2 ϕ

This is the ﬁnal form of our formula for the second variation of the energy. Before proceeding to derive some consequences of this formula, we would ﬁrst like to interpret the term 2 ϕ¨ + 2 u ϕ˙ 2 occurring in it. For this purpose, we recall (2.3.8): γ is geodesic iﬀ 2 (γ) γ¨ + 2 γ γ˙ 2 = 0.

(3.9.3)

It is now possible to prove the existence and regularity of geodesics on surfaces by analogous, but much simpler considerations than those of § 3.7. However, we are only interested in the case of a hyperbolic surface Σ2 anyhow, and we have already determined the geodesics of the hyperbolic metric on H explicitly in § 2.3. Since the geodesics of a hyperbolic surface are precisely those which lift to geodesics on the universal covering D, we have: Lemma 3.9.1 Let Σ be a compact hyperbolic Riemann surface (so that Σ has been provided a metric of constant curvature −1). Let p, q ∈ Σ. Then there exists precisely one geodesic in every homotopy class of curves joining p and q; this is also the shortest path from p to q in the given homotopy class, and depends continuously on p and q. Proof. Let π : H → Σ be the universal covering, and suppose p ∈ π −1 (p). Then a homotopy class of paths from p to q in Σ is uniquely determined by the choice of a q ∈ π −1 (q); this is because such a homotopy class corresponds to the paths from p to q in H (see § 1.3). But we know from Lemma 2.3.6 that there is precisely one geodesic γ

in H from p to q , and that this is the γ ) is the desired geodesic in Σ.

shortest path from p to q . Then γ := π(

142

3 Harmonic Maps

Remark. The existence of a geodesic with prescribed end-points in a given homotopy-class is assured in any surface with a complete metric, and the uniqueness whenever the curvature is non-positive. We now return to the interpretation of (3.9.1): Theorem 3.9.1 Let Σ1 and Σ2 be compact Riemann surfaces; suppose Σ2 is equipped with a metric of non-positive curvature K. Let u ∈ C 2 (Σ1 , Σ2 ), and ϕ(z, t) a variation of u with ϕ˙ ≡ 0. If u is harmonic, or if ϕ(z , ·) is a geodesic for every ﬁxed z ∈ Σ1 (it suﬃces to know that

at t = 0), then

2 ϕ¨ + 2 u ϕ˙ 2 = 0

(3.9.4)

d2 E(u + ϕ(t)) ≥ 0. 2 dt t=0

(3.9.5)

If K is actually negative, then either d2 E(u + ϕ(t)) > 0 dt2

(3.9.6)

uz uz − uz uz ≡ 0 ,

(3.9.7)

or i.e. the real rank of u is ≤ 1 everywhere. Proof. In view of our assumptions, the last two terms in (3.9.2) vanish, while the ﬁrst three are non-negative. Hence (3.9.5) follows. 2

d In the case dt 2 E(u + ϕ) = 0, the integrand, being pointwise non-negative, must vanish identically. Thus, if K < 0, we will have

uz ϕ˙ − uz ϕ˙ ≡ uz ϕ˙ − uz ϕ˙ ≡ 0

(3.9.8)

and ∂ 2 ˙ 2 ϕ˙ ϕ = ϕ˙ z + 2 u uz ϕ˙ ϕ˙ + 2 ϕ˙ z + 2 u uz ϕ˙ ϕ˙ = 0; (3.9.9) ∂z in exactly the same way, we will also have ∂ 2 ˙ ϕ˙ ϕ = 0. ∂z

(3.9.10)

From (3.9.9) and (3.9.10), we conclude 2 ϕ˙ ϕ˙ ≡ const..

(3.9.11)

This constant is not zero, since ϕ˙ ≡ 0 by assumption. Hence ϕ˙ and ϕ˙ are never zero, so that (3.9.8) implies (3.9.7).

3.9 Uniqueness of Harmonic Maps

143

We can now prove the uniqueness theorem for harmonic mappings: Theorem 3.9.2 Let Σ1 and Σ2 be compact Riemann surfaces, with Σ2 carrying a hyperbolic metric. Let u0 , u1 : Σ1 → Σ2 be harmonic maps which are homotopic to each other. If at least one of the two has a nonvanishing Jacobian somewhere (e.g. if one of the two maps is a diﬀeomorphism), then u0 ≡ u1 . Proof.

Let h(z, t) : Σ1 × [0, 1] → Σ2

be a homotopy between u0 and u1 , so that h(z, 0) = u0 (z), h(z, 1) = u1 (z). Let ψ(z, t) be the geodesic from u0 (z) to u1 (z) homotopic to h(z, t), parametrized such that (γ(t)) |γ(t)| ˙ ≡ const. ( ψ(z, t) exists and is unique, cf. Lemma 3.9.1 ). Then ut (z) := ψ(z, t) is also a homotopy between u0 and u1 (note that the geodesic ψ(z, t) depends continuously on z, by Lemma 3.9.1). We put f (t) := E(ut ). Then, by Theorem 3.9.1, we have f¨(t) ≥ 0

(3.9.12)

for all t ∈ [0, 1], so that f is a convex function. Also, since u0 and u1 are harmonic maps, we have f˙(0) = 0 = f˙(1). (3.9.13) Finally, by Theorem 3.9.1, we have f¨(0) > 0

or

f¨(1) > 0,

(3.9.14)

since (3.9.7) fails to hold for at least one of u0 and u1 (by assumption), unless ψ˙ ≡ 0, i.e. u0 = u1 (observe that the geodesic ψ(u , ·) has a ﬁxed arc-length ˙ 0) = 0, then ψ(z, ˙ t) ≡ 0 for all t ∈ [0, 1]. parametrisation); if e.g. ψ(z, But (3.9.12), (3.9.13) and (3.9.14) cannot all hold simultaneously, since a non-trivial convex function can have at the most one critical point. Hence

we must have ϕ˙ ≡ 0, i.e. u0 ≡ u1 . Corollary 3.9.1 Let Σ be a compact hyperbolic surface. Then the only isometry or conformal mapping of Σ onto itself homotopic to the identity is the identity map itself. Proof. An isometry is harmonic, and hence coincides with the identity map - also a harmonic map of course - if homotopic to it, by Theorem 3.9.2. A conformal automorphism of Σ can be lifted to one of D. But a conformal automorphism of D is an isometry with respect to the hyperbolic metric. Thus every conformal automorphism of Σ is an isometry of the hyperbolic metric, so the ﬁrst part of the theorem implies the second. Alternately, we could also have directly applied the uniqueness theorem 3.9.2, since conformal maps are automatically harmonic.

144

3 Harmonic Maps

Corollary 3.9.2 A compact hyperbolic surface Σ has at most ﬁnitely many isometries (or conformal automorphisms). Proof. By Corollary 3.9.1, diﬀerent isometries (or conformal automorphisms) lie in diﬀerent homotopy classes. On the other hand, every isometry has the same energy, namely the area of Σ (= 2π (2p−2), p = genus of Σ). Hence all the isometries are uniformly bounded in every C k -norm, in view of the a priori estimates of Sec. 3.8. Thus, if there were inﬁnitely many isometries, there would also have to be a convergent sequence of them, by the Arzel`a-Ascoli theorem. This would contradict Lemma 3.7.4, since diﬀerent isometries lie in diﬀerent homotopy classes.

Exercises for § 3.9 1)

2)

Show uniqueness of geodesics in given homotopy classes for negatively curved metrics, for closed geodesics as well as for geodesic arcs with ﬁxed end points. In the latter case, the result already holds for nonpositively curved metrics. Give an example of nonuniqueness for closed geodesics on a compact surface with vanishing curvature. (Note that for the uniqueness of closed geodesics, one has to exclude the degenerate trivial case where the curve reduces to a point, and 1 also only holds up to reparametrization, i.e. iθ that uniqueness i(θ+α) if S = iθ e , 0 ≤ θ < 2π , and γ e is geodesic, then so is γ e for every ﬁxed α ∈ R.) What can you say about uniqueness of harmonic maps u : Σ → Σ when Σ has vanishing curvature?

3.10 Harmonic Diﬀeomorphisms In this section, we wish to show that a harmonic map u : Σ1 → Σ2 , with Σ2 of nonpositive curvature, is a diﬀeomorphism, if topology permits. We begin again with some computations. Thus let Σ1 carry a metric λ2 (z) dz dz with curvature K1 ; the metric on Σ2 will be denoted as before by 2 (u) dudu, and its curvature by K2 . We also set 2 (u(z)) uz uz , λ2 (z) 2 (u(z)) uz uz . L := λ2 (z)

H :=

Lemma 3.10.1 If u : Σ1 → Σ2 is harmonic, then we have ∆ log H = 2 K1 − 2 K2 (H − L)

(3.10.1)

3.10 Harmonic Diﬀeomorphisms

145

at points where H = 0; similarly ∆ log L = 2 K1 + 2 K2 (H − L)

(3.10.2)

where L = 0. Here,

4 ∂2 λ2 ∂z∂z is the Laplace-Beltrami operator on Σ1 . ∆ :=

Proof.

Observe ﬁrst that ∆ log

1 λ2 (z)

= 2 K1 .

On the other hand, for any nowhere vanishing f of class C 2 , fz fz fzz 4 − 2 . ∆ log f = 2 λ f f

(3.10.3)

(3.10.4)

Now, ∂ 2 (u) u(z) uz = 2 (u) uzz uz + 2 (u) uz uzz ∂z +2 (u uz + u uz ) uz uz = 2 (u) uzz uz + 2 u uz uz uz

(3.10.5)

since u is harmonic. Similarly, ∂ 2 (u) uz uz = 2 (u) uz uzz + 2 u uz uz uz . ∂z

(3.10.6)

∂2 2 (u) uz uz = 2 (u) uzzz uz + 2 (u) uzz uzz ∂z∂z +2 (u uz + u uz ) uzz uz

(3.10.7)

Hence

+4 u uz uzz uz + 2 u uz uz uzz +2 (u uz + u uz ) u uz uz uz +2 (uu uz + uu uz ) uz uz uz . On the other hand, u being harmonic, we have 2 uzz + 2 u uz uz = 0,

(3.10.8)

hence we get by diﬀerentiation 2 uzzz + 2 (u uz + u uz ) uzz + 2 (u uz + u uz ) u uz uz +2 (uu uz + uu uz ) uz uz + 2 u uzz uz + 2 u uz uzz = 0

146

3 Harmonic Maps

Another application of (3.10.8) now yields (3.10.9) 2 uzzz + 2 u uz uzz + 2 2u uz uz uz − 2 u u uz uz uz +2 (uu uz + uu uz ) uz uz + 2 u uzz uz + 2 u uz uzz = 0. It follows from (3.10.7) and (3.10.9) that 2u 2u ∂2 2 2 (u) uz uz = u z uz uzz + uzz + uz uz ∂z∂z + (2 uu − 2 u u ) (uz uz − uz uz ) uz uz .

(3.10.10)

From (3.10.5) and (3.10.6), we get ∂ 2 ∂ 2 uz uz · uz uz = ∂z ∂z 2 2u 2u u z uz uz uz 2 uzz + uzz + uz uz .

(3.10.11)

Observe ﬁnally that K2 = −

4 ( uu − u u ) . 4

(3.10.12)

Thus, (3.10.4), (3.10.10), (3.10.11) and (3.10.12) yield ∆ log 2 uz uz =

2 K2 2 (uz uz − uz uz ) λ2 (z) = −2 K2 (H − L),

which is (3.10.1), if we use (3.10.3). The proof of (3.10.2) is similar.

(3.10.13)

Lemma 3.10.2 If u : Σ1 → Σ2 is harmonic, and

(for some z0 ∈ Σ1 ), then

uz (z0 ) = 0

(3.10.14)

H = s · |h|2

(3.10.15)

in a neighbourhood of z0 , where s is a nowhere-vanishing function of class C 2 , and h is a holomorphic function. Proof.

Let f := uz . Since u is harmonic, we have fz = −2

u uz · f,

or fz = µ f,

(3.10.16)

3.10 Harmonic Diﬀeomorphisms

147

where we have set µ := −2

u uz . Now let µ

be a function with compact support coinciding with µ in a neighbourhood of z0 , and consider 1 1 µ

(ξ) dξ dξ, (3.10.17) α(z) := 2πi ξ−z the integration being over the whole complex plane. We have 1 α(z1 ) − α(z2 ) 1 = (

µ(ξ) − µ

(ξ − z1 + z2 )) dξ dξ. z1 − z2 2πi(z1 − z2 ) ξ − z1 Since we may assume that µ

, like µ, is Lipschitz continuous, it follows from the above that we may diﬀerentiate under the integral sign. Hence ∂ 1 1 µ

(ξ) dξ dξ αz (z) = 2πi ∂z ξ − z ∂ 1 1 µ

(ξ) dξ dξ =− 2πi ξ − z ∂ξ 1 1 ∂ dξ dξ. = (

µ(ξ)) 2πi (ξ − z) ∂ξ Now, since µ

has compact support, we see by Stokes’ theorem that 1 ∂ 1 dξ dξ (3.10.18) (

µ(ξ)) 2πi C−B(z,ε) ∂ξ ξ−z 1 1 = dξ −→ µ

(z) µ

(ξ) 2πi ∂B(z,ε) ξ−z as ε → 0 (Cauchy’s formula, since µ

is continuous). Hence αz = µ

,

(3.10.19)

so that αz (z) = µ(z)

near z0 .

(3.10.20)

−α

Therefore, h := e · f is holomorphic by (3.10.16) and (3.10.20), and our 2 assertion follows with s = λ 2 |eα |2 .

Lemma 3.10.2 shows that, unless H ≡ 0, the zeroes of H are isolated. More speciﬁcally, near any zero zi of H, we can write H = ai |z − zi |ni + O (|z − zi |ni ) ,

(3.10.21)

for an ai > 0 and an ni ∈ N, as follows from the relevant theorems for holomorphic functions. Naturally, a similar statement also holds for L.

148

3 Harmonic Maps

By the Gauss-Bonnet formula (cf. Cor. 2.5.3), we have K1 λ2 i dz dz = 2π χ(Σ1 ),

(3.10.22)

Σ1

where λ2 dz dz is the metric on Σ1 , and χ(Σ1 ) the Euler characteristic of Σ1 . Similarly, K2 2 i du du = 2π χ(Σ2 ), (3.10.23) Σ2

hence the transformation formula for integrals yields K2 (H − L) λ2 i dz dz Σ1 K2 (uz uz − uz uz ) 2 (u(z)) i dz dz =

(3.10.24)

Σ1

= 2π d(u) χ(Σ2 ), where d(u) denotes the degree of u. Finally, it follows from (3.10.1) and the local representation (3.10.21) by the same argument as in the proof of Theorem 2.5.2 that lim

ε→0

Σ1 \

k i=1

∆ log H = B(zi ,ε)

k

ni ,

(3.10.25)

i=1

(provided H ≡ 0), where z1 , . . . , zk are the zeros of H as in (3.10.21). Putting together (3.10.1), (3.10.22), (3.10.24) and (3.10.25), we obtain Theorem 3.10.1 If u : Σ1 → Σ2 is harmonic, and H := then k 1 χ(Σ1 ) − d(u) χ(Σ2 ) = − ni , 2 i=1

2 (u(z)) λ2 (z)

uz uz ≡ 0, (3.10.26)

where d(u) is the degree of u, and the ni are the orders of the zeros of f . In particular, if (3.10.27) χ(Σ1 ) = d(u) χ(Σ2 ), d(u) > 0 (e.g. d(u) = 1 and χ(Σ1 ) = χ(Σ2 )), then H(z) > 0

(3.10.28)

for all z ∈ Σ1 . Proof. It is clear that (3.10.26) follows from the preceding discussion. If d(u) > 0, then H ≡ 0, since L ≥ 0 and H − L is the Jacobian determinant of u. Now the rest follows, since H ≥ 0.

Theorem 3.10.2 Let Σ1 and Σ2 be the compact Riemann surfaces of the same genus, and assume that the curvature K2 of Σ2 satisﬁes K2 ≤ 0. Then any harmonic map u : Σ1 → Σ2 of degree one is a diﬀeomorphism.

3.10 Harmonic Diﬀeomorphisms

149

Proof. 2 (u(z)) (uz uz − uz uz ) λ2 (z) is the Jacobian determinant of u. We shall show that H − L > 0 everywhere. It will then follow that u is a diﬀeomorphism, since it is of degree one. We begin by proving that H −L=

H − L ≥ 0.

(3.10.29)

Thus, let B := {z ∈ Σ1 : H(z) − L(z) < 0} . We already know that H > 0 in Σ1 (by (3.10.28)). Hence L(z) > 0 on B, and we can apply (3.10.1) and (3.10.2) to get ∆ log

L(z) = 4 K2 (H(z) − L(z)) ≥ 0 H(z)

(3.10.30)

L(z) on B, since K2 ≤ 0. Thus log H(z) is subharmonic and > 0 in B, and vanishes on ∂B, contradicting the maximum principle. Thus B = ∅, and (3.10.29) is proved. Suppose now that (3.10.31) H(z0 ) − L(z0 ) = 0

for some z0 ∈ Σ1 . By (3.10.28), we must then have H(z) > 0,

L(z) > 0

(3.10.32)

in a neighbourhood U of z0 . Since H − L ≥ 0, we can ﬁnd constants c1 , c2 such that, for z ∈ U , H(z) H(z) − 1 ≤ c2 log (3.10.33) (H − L) (z) ≤ c1 L(z) L(z) L(z) = −c2 log . H(z) on U (cf. (3.10.32)). By (3.10.1) and (3.10.2), we have in U ∆ f = ∆ log

L = 4 K2 (H − L), H

so that, by (3.10.33) and recalling that K2 ≤ 0, we get ∆ f − 4 c2 f ≥ 0.

(3.10.34)

Further, f attains its maximum in U , namely 0, at z0 . Hence, by Lemma 3.10.3 below, f ≡ 0 in U , i.e. H − L ≡ 0 in U . This argument shows that the set {z ∈ Σ1 : H(z) − L(z) = 0} is open. But this set is obviously closed, and is not the whole of Σ1 , since u has degree one. Hence it must be empty, as we wished to show.

150

3 Harmonic Maps

The lemma below, which was used in the proof of Theorem 3.10.2 is a special case of the strong maximum principle of E. Hopf (the proof of the general case is similar to that of our special case). Lemma 3.10.3 Suppose that, with a bounded function, c ≥ 0, ∆f − cf ≥ 0

(3.10.35)

on a domain Ω in Rd . Suppose f attains a non-negative maximum at an interior point of Ω. Then f is constant. Proof. We shall prove the following:

Suppose further

⊂ Rd . Let x0 ∈ ∂ Ω. Assertion. Suppose ∆ f − c f ≥ 0 on Ω that (i) f is continuous at x0 , (ii) f (x0 ) ≥ 0,

(iii) f (x0 ) > f (x) for all x ∈ Ω, ◦

with (iv) there exists an open ball B(y, R) := x ∈ Rd : |x − y| < R ⊂ Ω x0 ∈ ∂B(y, R). Then ∂f (x0 ) > 0 (3.10.36) ∂ν

exists. if this derivative (in the direction of the outer normal to Ω) To prove this assertion, we consider the auxiliary function g(x) := e−γ |x−y| − e−γ R 2

2

(3.10.37)

◦

on B(y, R)\B(y, ), 0 < < R. 2 2 Since ∆ g − c g = 4 γ 2 |x − y|2 − 2γ − c e−γ |x−y| + c e−γ R , we have, for suﬃciently large γ, ∆g − cg ≥ 0 ◦

in B(y, R)\B(y, ). By (iii) and (iv), f (x) − f (x0 ) < 0,

x ∈ ∂B(y, ).

Hence there exists an ε > 0 such that f (x) − f (x0 ) + ε g(x) ≤ 0

(3.10.38)

for x ∈ ∂B(y, ). But since g = 0 on ∂B(y, R), (3.10.38) also holds for x in ∂B(y, R), again in view of (ii) and (iv). On the other hand, we also have ∆ (f (x) − f (x0 ) + ε g(x)) − c(x) (f (x) − f (x0 ) + ε g(x)) (3.10.39) ≥ c(x) f (x0 ) ≥ 0 ◦

on B(y, R)\B(y, ), since f (x0 ) ≥ 0.

3.10 Harmonic Diﬀeomorphisms

151

Therefore, by the usual strong maximum principle for sub-harmonic functions (Cor. 3.4.3), ◦

f (x)−f (x0 )+ε g(x) cannot attain a positive maximum inside B(y, R)\B(y, ). Since f (x) − f (x0 ) + ε g(x) ≤ 0 on ∂(B(y, R)\B(y, )) it follows that f (x) − f (x0 ) + ε g(x) ≤ 0

on B(y, R)\B(y, ).

Hence ∂ (f (x) − f (x0 ) + ε g(x)) ≥ 0, ∂ν

x ∈ ∂B(y, R).

In particular, 2 ∂g(x0 ) ∂ f (x0 ) ≥ −ε = ε 2γ e−γ R > 0. ∂ν ∂ν This proves (3.10.36). To deduce Lemma 3.10.3, we assume that f is non-constant and attains a maximum m ≥ 0 inside Ω. Then

:= {x ∈ Ω : f (x) < m} = ∅, Ω ◦

∩ Ω = ∅. Let y ∈ Ω,

and B(y, R) the biggest ball around y contained and ∂ Ω

Ω. Then f (x0 ) = m ≥ 0 for some x0 ∈ ∂B(y, R) and f (x) < f (x0 ) on Ω. Hence we can apply (3.10.36) and get D f (x0 ) = 0, which is impossible at an interior maximum. This contradiction proves Lemma 3.10.3.

Corollary 3.10.1 Let Σ1 and Σ2 be compact Riemann surfaces of the same genus with Σ2 equipped with a metric of curvature ≤ 0 and g : Σ1 → Σ2 a (continuous) map of degree one. Then g is homotopic to a unique harmonic map u : Σ1 → Σ2 , and u is a diﬀeomorphism. In particular, compact Riemann surfaces, one of which carries a metric of nonpositive curvature, and which are homeomorphic, are also diﬀeomorphic. Proof.

This follows from Theorems 3.7.1, 3.8.2 and 3.10.2.

We would like to conclude this section with a topological application of Theorem 3.10.1, originally proved by H. Kneser: Corollary 3.10.2 Let Σ1 and Σ2 be compact Riemann surfaces, with χ(Σ2 ) < 0. Then, for any continuous map g : Σ1 → Σ2 with d(g) = 0, we have |d(g)| χ(Σ2 ) ≥ χ(Σ1 ). Proof. Since χ(Σ2 ) < 0, we can put a hyperbolic metric on Σ2 as will be shown in § 4.4. Then, by Theorem 3.7.1, g is homotopic to a harmonic map

152

3 Harmonic Maps

u : Σ1 → Σ2 . In particular, d(u) = d(g). We observe now that, in analogy with (3.10.26), we also have χ(Σ1 ) + d(u) χ(Σ2 ) = −

1 mi 2 i=1

(3.10.40)

2

where the mi are the orders of the zeros of L = λ 2 uz uz , provided L ≡ 0. Thus, if (3.10.41) |d(u)| χ(Σ2 ) < χ(Σ1 ), then it follows from (3.10.26) or (3.10.40) that either H ≡ 0 or L ≡ 0, since the sums on the right hand side would otherwise be non-positive. Thus u is either holomorphic or anti-holomorphic. But then the Riemann-Hurwitz formula Thm. 2.5.2 for a non-constant u gives |d(u)| χ(Σ2 ) = χ(Σ1 ) + r,

r ≥ 0.

(In the case H ≡ 0, we have of course to use the analogue of the RiemannHurwitz formula for an anti-holomorphic map.) But this is a contradiction to (3.10.41), which therefore cannot hold. This proves the corollary.

Exercises for § 3.10 1)

Let aij , bi ∈ R, i, j = 1, . . . , d, with d

aij ξ i ξ j ≥ λ |ξ|2

for all ξ ∈ Rd ,

i,j=1

with λ > 0. Suppose d i,j=1

2)

∂ 2 f (x) ∂f + bi i (x) + c(x) f (x) ≥ 0 ∂xi ∂xj ∂x i=1 d

aij

in Ω,

with c ≥ 0 and bounded. Show that if f achieves a nonnegative maximum in the interior of Ω, then f is constant. What can you say if instead of constant coeﬃcients, we have variable coeﬃcients aij (x), bi (x)? Is there a continuous map of nonzero degree from S 2 onto a torus?

3.11 Metrics and Conformal Structures In this section, we consider a metric given in real form on a two-dimensional manifold, and show how it automatically determines the structure of a Riemann surface on the two-manifold. This result will also be useful in § 4.2

3.11 Metrics and Conformal Structures

153

when we prove Teichm¨ uller’s theorem. Recalling the constructions of § 2.3.A, we state Deﬁnition 3.11.1 Let M be a two-dimensional diﬀerentiable manifold (surface for short). A Riemannian metric on M is given in local coordinates z = (x, y) by (3.11.1) g11 (z) dx2 + 2 g12 (z) dx dy + g22 (z) dy 2 with g11 > 0, g11 (z) g22 (z) − g12 (z)2 > 0. We shall always assume that the coeﬃcients gij of the metric are of class C ∞ ; this will be suﬃcient for our purposes. The transformation behaviour of a metric is again determined by (3.11.1). To describe it, let us denote the coordinates on M by z 1 , z 2 . Then (3.11.1) becomes 2 gij dz i dz j . (3.11.2) i,j=1

If (w1 , w2 ) → z 1 (w1 , w2 ), z 2 (w1 , w2 ) is a transformation of coordinates, then (3.11.2) becomes 2 2 i,j=1 k,l=1

gij (z(w))

∂z i ∂z j dwk dwl . ∂wk ∂wl

(3.11.3)

It is not very diﬃcult to see that every surface (satisfying the necessary condition of being paracompact) carries a Riemannian metric. This is because local metrics can be patched up together by means of a partition of unity; however, we do not wish to go into this in detail, as a similar construction has been performed already for Lemma 2.3.3. Given a metric, we can again measure lengths and angles. For example, ∂ ∂ + w ∂y is given by the length of a tangent vector V = v ∂x |V |2 = g11 v 2 + 2 g12 v w + g22 w2 . Hence we can deﬁne the lengths of curves, and surface areas, as in § 2.3. Thus such a metric is a priori independent of the existence of a conformal structure (i.e. the structure of a Riemann surface). However, we shall prove in Theorem 3.11.1 below that every Riemannian metric does in fact determine a conformal structure on M , with respect to which the metric has the conformal form λ2 (z) dz dz. This result, which goes back to Gauss, shows that the introduction of real (Riemannian) metrics does not lead beyond conformal metrics. Real metrics are nevertheless of some signiﬁcance, since the conformal structure of a surface is often unknown, whereas the metric can frequently be analysed through measurements on the surface. This is for example the case when we are dealing with a surface in three-dimensional Euclidean space, where measurements on the surface are determined by measurements in the ambient space.

154

3 Harmonic Maps

Lemma 3.11.1 By introducing complex coordinates z = x + iy, z = x − iy, we can bring the metric into the form 2

σ(z) |dz + µ(z) dz|

(= σ(z) (dz + µ dz) (dz + µ dz) )

(3.11.4)

with a real-valued σ > 0, and a complex-valued µ, |µ| < 1. Proof.

We have dz = dx + idy, dz = dx − idy, so that dz 2 = dx2 − dy 2 + 2 i dx dy, dz 2 = dx2 − dy 2 − 2 i dx dy,

hence (3.11.4) becomes (σ µ + σ µ + σ (1 + µ µ)) dx2 + (i σ µ − i σ µ) dx dy + (−σ µ − σ µ + σ (1 + µ µ)) dy 2 . If µ := α + iβ, then we must solve g11 = 2 σ α + σ 1 + α2 + β 2 , g12 = 2 σ β, g22 = −2 σ α + σ 1 + α2 + β 2 for α, β and σ. Thus, β= and

g12 , 2σ

α=

g11 − g22 4σ

(g11 − g22 )2 g2 (g11 + g22 )2 g11 + g22 ± − − 12 σ= 4 16 16 4 1 g11 + g22 2 ± = g11 g22 − g12 . 4 2

2 > 0 by assumption, we can take the positive square root Since g11 g22 − g12 in the above expression for σ. Then

|µ|2 = α2 + β 2 ≤

2 < g11 g22 . again since g12

2 2 2 4 g12 + g11 − 2 g11 g22 + g22 2 (g11 + g22 ) < 1,

The introduction of complex parameters above has merely a formal meaning, since we do not as yet know whether M admits any conformal structure at all. In any case a metric in the form (3.11.4) is not conformal so long as µ ≡ 0.

3.11 Metrics and Conformal Structures

155

Theorem 3.11.1 Let M be an oriented surface with a Riemannian metric. Then M admits a conformal structure, i.e. M can be made into a Riemann surface. Local holomorphic coordinates are given by (diﬀeomorphic) solutions of the equation (3.11.5) uz = µ uz where µ is as in (3.11.4). In such coordinates, the metric has the conformal form σ(z) du du. uz uz Proof. We write out the diﬀerential equation (3.11.5) in real form: (setting z = x + iy,) as in Lemma 3.11.1 we have g11 dx2 + 2 g12 dx dy + g22 dy 2 = σ |dz + µ dz|2 = σ (dz + µ dz) (dz + µ dz). 1

2 2 ) and u := v + iw, (3.11.5) becomes With g := (g11 g22 − g12

vx = − gg12 wx + vy =

− gg22

wx +

g11 g g12 g

wy ,

(3.11.6)

wy .

By diﬀerentiating and using vxy = vyx , we derive the following equation for w: (3.11.7) a11 wxx − 2 a12 wxy + a22 wyy + b1 wx + b2 wy = 0, where g22 g12 g11 , a12 = , a22 = , g g g ∂ ∂ ∂ ∂ b1 = a11 − a12 , b2 = a22 − a12 . ∂x ∂y ∂y ∂x

a11 =

We want to ﬁnd, in some neighbourhood of an arbitrary point z0 , a solution w of (3.11.7) whose diﬀerential at z0 does not vanish. We can then determine v from (3.11.6) (the necessary condition vxy = vyx is satisﬁed by construction). Then vx wy − vy wx = since the matrix

1 g11 wy2 − 2 g12 wx wy + g22 wx2 > 0, g

g11 g12 g12 g22

(3.11.8)

is positive deﬁnite by assumption. We can thus deﬁne a conformal structure on Σ by declaring diﬀeomorphic solutions u of (3.11.5) as local coordinates: if u and t are solutions of (3.11.5) and u satisﬁes (3.11.8), then

156

3 Harmonic Maps

t u = tz z u + t z z u 1 = (−tz uz + tz uz ) = 0. uz uz − uz uz Thus the transition maps between charts are holomorphic as required. Since du = uz dz + uz dz = uz (dz + µ dz), du = uz dz + uz dz = uz (µ dz + dz), it is clear that the metric has conformal form with respect to these charts as asserted. Thus it remains to show that (3.11.7) has local solutions with nonvanishing gradient. Let z0 ∈ Σ. By a suitable linear change of coordinates, we may assume that (3.11.9) a11 (z0 ) = a22 (z0 ) = 1, a12 (z0 ) = 0. Thus, at z0 , the principal part of our diﬀerential operator L := a11

∂2 ∂2 ∂2 ∂ ∂ + a + b2 − 2 a + b1 12 22 2 2 ∂x ∂x∂y ∂y ∂x ∂y

(3.11.10)

is just the (Euclidean) Laplace operator ∆. For any function ϕ, we set ψ = (∆ − L) ϕ = ψ1 + ψ2 ,

(3.11.11)

where ∂2ϕ ∂2ϕ ∂2ϕ + (1 − a + 2 a ) , 12 22 ∂x2 ∂x∂y ∂y 2 ∂ϕ ∂ϕ ψ2 := −b1 − b2 . ∂x ∂y ψ1 := (1 − a11 )

For R > 0, we consider on C 3,α (B(z0 , R)) the norm 1 1 1 |||v|||R = D3 vC α + D2 vC α + 2 D vC α + 3 vL2 R R R (0 < α < 1). Since the coeﬃcients 1 − a11 , 2a12 and 1 − a22 are Lipschitz continuous (in fact C ∞ ) and vanish at z0 , we have 1 1 D ψ1 + ψ1 ≤ c1 R D3 ϕ + D2 ϕ R R C α (B(z0 ,R)) C α (B(z0 ,R)) (3.11.12) with a constant c1 independent of R.

3.11 Metrics and Conformal Structures

157

Also, if ϕ has compact support, we have 1 1 2 ≤ c2 D ϕ + D ϕ (3.11.13) D ψ2 + ψ2 R R C α (B(z0 ,R)) C α (B(z0 ,R)) 1 . ≤ c3 R D3 ϕ + D2 ϕ R C α (B(z0 ,R))

We assume that ϕ, hence also ψ, has compact support in B(z0 , R). Thus we may suppose ψ is deﬁned on the whole of C, and vanishes outside B(z0 , R). Let 1 log |z − ξ| G(z − ξ) = 2π be the Green function. We set X(z) = G(z − ξ) ψ(ξ) dξ. Then by Theorem 3.5.1 b) D2 XC α (C) ≤ const. ψC α (B(z0 ,R)) ,

(3.11.14)

D3 XC α (C) ≤ const. D ψC α (B(z0 ,R))

(3.11.15)

D XL2 ≤ c4 R ψL2 , XL2 ≤ c5 R2 log R ψL2

(3.11.16)

and similarly Further

(see e.g. Lemma 3.2.7). By Corollary 3.4.1 and (3.11.11), ∆X = ψ = (∆ − L) ϕ,

(3.11.17)

and (3.11.12) – (3.11.16) imply |||X|||R ≤ c6 R log R |||ϕ|||R .

(3.11.18)

now a cut-oﬀ function η ∈ C02 (B(z0 , R)) with η ≡ 1 on WeRchoose B z0 , 2 1 R 1 2 |D η| ≤ c8 2 ; R |D η| ≤ c7

(3.11.19)

158

3 Harmonic Maps

we set ϕ = ηw (for w ∈ C 3,α (B(z0 , R)), and X=Tw (X being the function constructed above for ϕ). Then, by (3.11.18) and (3.11.19), we have (3.11.20) |||T w|||R ≤ c9 R log R |||w|||R . Thus T is a bounded linear operator of C 3,α (B(z0 , R)) into itself. If R is chosen so small that (3.11.21) c9 R log R =: q < 1, then the series 1 + T + T 2 + . . . converges (in the norm ||| |||, as comparison with q n shows), and clearly ∞

T n = (1 − T )−1 .

n=0

Let us now take, for example, ξ(z) = x + y and

w(z) = (1 − T )−1 ξ(z).

Then (cf. (3.11.17)) 0 = ∆ (ξ) = ∆ (w − T w) = ∆ w − (∆ − L) η w = ∆ ( (1 − η) w ) + L (η w), R and since η ≡ 1 on B z0 , 2 , we have L w = 0 there. Also |||w − ξ|||R = ||| (1 − T )−1 − 1 ξ||| q ≤ |||ξ|||R . 1−q

(3.11.22)

By choosing R small enough, we can make the right side as small as we please. Then, since the C 3,α -norm controls the C 1 -norm, |D w(z0 ) − D ξ(z0 )| will also be arbitrarily small. In particular, D w(ξ0 ) = 0. This ﬁnishes the proof for the existence of a solution of (3.11.7) in a neighbourhood of z0 with non-vanishing diﬀerential at z0 , and hence of Theorem 3.11.1.

3.11 Metrics and Conformal Structures

159

Remark. With a little care, one can show by the above method that there exists a local solution of (3.11.7) which, together with its diﬀerential, has prescribed values at z. Finally, we observe that it is suﬃcient for the coeﬃcients a11 , a12 , a22 to be H¨ older continuous of some exponent α ∈ (0, 1), though we have used Lipschitz continuity.

This page intentionally left blank

4 Teichm¨ uller Spaces

4.1 The Basic Deﬁnitions In this chapter, Λ will denote a compact orientable two-dimensional manifold; for brevity we shall refer to such a Λ as a surface. If Λ has been given a conformal structure g, then the resulting Riemann surface will be denoted by (Λ, g). We shall suppose that the genus of Λ is at least two. Such a (Λ, g) will thus be covered by the upper half plane H, and hence automatically inherits a hyperbolic metric. The hyperbolic metric is uniquely determined by the conformal structure g, since any conformal map between hyperbolic metrics is an isometry: any such map lifts to a conformal automorphism of the upper halfplane H, which is an isometry of the hyperbolic metric on H. Thus two conformally equivalent hyperbolic metrics diﬀer only by an isometry, and we cannot distinguish between them from the metric point of view. We therefore have: Lemma 4.1.1 Let Λ be a compact surface of genus p ≥ 2. Then there is a natural bijective correspondence between conformal structures and hyperbolic metrics on Λ. We shall identify a conformal structure on Λ with the corresponding hyperbolic metric, and denote both of them by the same letter (usually g or γ). Just as we cannot distinguish between isometric metrics, we cannot distinguish between conformal structures diﬀering from each other by a conformal bijection. Hence we deﬁne: Deﬁnition 4.1.1 The moduli space1 Mp is the set of conformal structures (or hyperbolic metrics) on the given surface Λ, where (Λ, g1 ) and (Λ, g2 ) are identiﬁed with each other if there exists a conformal (or isometric) diﬀeomorphism between them. Here p = genus (Λ). However, the topology2 of the space Mp is quite complicated. Thus, Mp is for example not a manifold. Singularities occur at conformal structures admitting conformal automorphisms. 1

2

in order to justify the appelation “space” we shall soon introduce a topology on Mp as introduced in § 4.2 below

162

4 Teichm¨ uller Spaces

Teichm¨ uller therefore introduced a weaker identiﬁcation than the one which led us to the deﬁnition of moduli space. Namely, (Λ, g1 ) and (Λ, g2 ) will now be identiﬁed if there is a conformal diﬀeomorphism between them which is homotopic to the identity. Another way of formulating this notion of equivalence is to consider triples (Λ, g, f ), where g is a conformal structure on Λ and f : Λ → Λ is a diﬀeomorphism. Two such triples (Λ, gi , fi ), i = 1, 2, will now be considered equivalent if there exists a conformal map k : (Λ, g1 ) → (Λ, g2 ) for which the diagram

commutes up to homotopy, i.e. f2 ◦ f1−1 and k are homotopic.

(4.1.1)

Deﬁnition 4.1.2 The space of equivalence classes of triples (Λ, g, f ) under the above equivalence relation is called Teichm¨ uller space and is denoted by Tp (p = genus of Λ). The diﬀeomorphism f : Λ → Λ is called a marking of Λ. Thus the moduli space Mp is the quotient space of Tp obtained by “forgetting” the marking. The marking f tells us how (Λ, g) has been topologically identiﬁed with the ﬁxed model Λ. A map h : (Λ, g1 , f1 ) → (Λ, g2 , f2 ) is homotopic to the identity of Λ if and only if h is homotopic to f2 ◦ f1−1 . Thus, a k which satisﬁes (4.1.1) is precisely one which is homotopic to the identity. Thus Teichm¨ uller space arises when we identify (Λ, g1 , f1 ) and (Λ, g2 , f2 ) if there exists a conformal diﬀeomorphism between them which is homotopic to the identity of the underlying topological model. We shall also need the concept of a holomorphic quadratic diﬀerential: Deﬁnition 4.1.3 Let Σ = (Λ, g) be a Riemann surface with a local conformal coordinate z. ϕ(z) dz 2 is called a holomorphic quadratic diﬀerential if ϕ is holomorphic. (The term dz 2 above gives the transformation rule for a quadratic differential form: if w → z(w) is conformal, then ϕ(z) dz 2 pulls back to dz 2 dw2 .) ϕ(z(w)) dw Q(g) denotes the space of holomorphic quadratic diﬀerentials on (Λ, g). Q(g) is obviously a vector space, since any linear combination of holomorphic quadratic diﬀerential forms is again one such. We shall determine the dimension of Q(g) in Corollary 5.4.2, as a consequence of the Riemann-Roch theorem.

4.2 Harmonic Maps and Teichm¨ uller Spaces

163

Exercises for § 4.1 1) 2)

Determine all holomorphic quadratic diﬀerentials on S 2 and on a torus. (You can ﬁnd a solution at the end of § 5.4). Let D = z = reiφ , 0 ≤ r ≤ 1, 0 ≤ φ < 2π be the unit disk, and let a holomorphic quadratic diﬀerential on the closure of D given in polar coordinates as φ(z) (dr + i r dφ)2 . Suppose Im φ(z) = 0 for r = |z| = 1. Show that φ(z) (dr + ir dφ)2 can be reﬂected across ∂D to become a holomorphic quadratic diﬀerential on C ∪ {∞}, i.e. on S 2 . What can you conclude after having solved 1)?

4.2 Harmonic Maps, Conformal Structures and Holomorphic Quadratic Diﬀerentials. Teichm¨ uller’s Theorem Our considerations will depend decisively on the results of Chapter 3 on harmonic mappings. We collect them here once again (Corollary 3.10.1): Lemma 4.2.1 Let (Λ, g) be a compact hyperbolic surface. Then, for every other hyperbolic surface (Λ, γ), there exists a unique harmonic map u(g, γ) : (Λ, g) → (Λ, γ) which is homotopic to the identity of Λ. This u(g, γ) is a diﬀeomorphism.

We now have Lemma 4.2.2 Let u : (Λ1 , g1 ) → (Λ2 , g2 ) be a harmonic map, where the metric 2 (u) dudu on (Λ2 , g2 ) is not necessarily hyperbolic.3 Let z be a conformal parameter on (Λ1 , g1 ). Then 2 uz uz dz 2

(4.2.1)

is a holomorphic quadratic diﬀerential on (Λ1 , g1 ). Further 2 uz uz dz 2 ≡ 0 ⇔ u is holomorphic or anti-holomorphic. 3

(4.2.2)

At this point, we are violating our own convention of identifying a conformal structure with its associated hyperbolic metric.

164

4 Teichm¨ uller Spaces

Proof.

We have ∂ 2 uz uz = 2 uzz + 2 u uz uz uz ∂z + 2 uzz + 2 u uz uz uz =0

since u is harmonic. Also, it is clear that 2 uz uz dz 2 transforms like a quadratic diﬀerential. It only remains to check that u cannot be holomorphic on some subset of Λ1 , and antiholomorphic on the complement, and then (4.2.2) will also be proved. But u is holomorphic precisely where L vanishes identically, and anti-holomorphic precisely where H vanishes identically, and we know that the zeros of H (or L) are isolated unless it vanishes identically on Λ1 (see Lemma 3.10.2 and the remark following). Hence u must be

holomorphic or anti-holomorphic (on all of Λ1 ) if 2 uz uz dz 2 ≡ 0. Remark. We shall be considering only harmonic maps homotopic to the identity; since such maps preserve orientation, they can never be antiholomorphic. In view of Lemmas 4.2.1 and 4.2.2, we have a map q(g) : Tp → Q(g) which sends a (Λ, γ, f ) to the quadratic diﬀerential determined by the harmonic map u(g, γ) : (Λ, g) → (Λ, γ) homotopic to the identity. This map is well-deﬁned since u(g, γ) is unique. Clearly q(g) ( (Λ, g, Id) ) = 0 since u(g, g) = Id is conformal. Theorem 4.2.1 For every g, the map q(g) : Tp → Q(g) is bijective. As a preparation for the proof of this theorem, we shall now look more closely at how the harmonic map u(g, γ) depends on γ. Let therefore u : (Λ, g) → (Λ, γ) be a harmonic diﬀeomorphism with positive Jacobian determinant; let 2 dudu denote the hyperbolic metric γ, and z a local conformal parameter on (Λ, g). Then (4.2.3) 2 du du = 2 (u(z)) du(z) d(u(z)) 2 2 2 2 = uz uz dz + ( uz uz + uz uz ) dz dz + uz uz dz 2 . Thus we have pulled back the metric γ to (Λ, g) by means of the map u. Since u may not be conformal, this metric is no more of the form σ 2 (z) dzdz, i.e. need not be compatible with the conformal structure g.

4.2 Harmonic Maps and Teichm¨ uller Spaces

165

Let now ψ dz 2 , ϕ dz 2 ∈ Q(g), and let γ(t) be a path in Tp such that, for the associated harmonic maps ut : (Λ, g) → (Λ, γ(t)) and hyperbolic metrics 2t dut dut , 2t utz utz = ψ + t ϕ.

(4.2.4)

We deﬁne H(t)(z) :=

2t (ut (z)) t t u z uz , λ2 (z)

L(t)(z) :=

2t (ut (z)) t t uz uz . λ2 (z)

Then (4.2.3) becomes 2t dut dut = (ψ + t ϕ) dz 2 +λ2 (H(t) + L(t)) dz dz + ψ + t ϕ dz 2 (4.2.5) We wish to compute the derivatives of H(t) and L(t) with respect to t at t = 0. This can be done by using the relations H(t) · L(t) =

1 (ψ + t ϕ) ψ + t ϕ 4 λ

(4.2.6)

and ∆ log H(t) = −2 + 2 (H(t) − L(t))

(4.2.7)

(cf. (3.10.1): both the curvatures K1 and K2 are −1 in the present case). Observe that H(t) > 0 on (Λ, g) (4.2.8) since ut is a diﬀeomorphism with Jacobian determinant H(t) − L(t) > 0, and L(t) ≥ 0 by deﬁnition. Using a dot on top to denote diﬀerentiation with respect to t, we see from (4.2.6) and (4.2.7) that, at t = 0: 1 H˙ L + H L˙ = 4 ψ ϕ + ψ ϕ λ and ∆

H˙ = 2 H˙ − L˙ , H

(4.2.9)

(4.2.10)

Proof of Theorem 4.2.6. Let us begin by proving that q(g) is injective. Thus let us suppose that the harmonic maps i = 1, 2 ui : (Λ, g) → (Λ, γ i ),

166

4 Teichm¨ uller Spaces

lead to the same quadratic diﬀerential. If we set (as above) H i :=

2i uiz uiz , λ2

Li :=

2i uiz uiz , λ2

ψ i := 2i uiz uiz ,

then, ψ 1 = ψ 2 , so that (by (4.2.6)) H 1 · L1 = H 2 · L2 .

(4.2.11)

Also, by (4.2.7) and (4.2.8), we have ∆ log

H1 = 2 H 1 − H 2 + L2 − L1 . 2 H

(4.2.12)

By (4.2.11) and (4.2.12), it follows that max

H1 ≤ 1, H2

1

(4.2.13) 1

H since otherwise ∆ log H H 2 would be positive at the maximum of log H 2 . Since 2 the argument is symmetric in H 1 and H 2 , we also have max H H 1 ≤ 1, hence H 1 = H 2 , and then also L1 = L2 by (4.2.11). It follows from (4.2.5) (with t = 0) that 21 du1 du1 = 22 du2 du2 .

Thus (Λ, γ 1 ) and (Λ, γ 2 ) have the same hyperbolic metric. If u1 and u2 are both homotopic to the identity, the two structures will therefore be identiﬁed. This proves the injectivity of q(g). Observe that, at this point, we have made crucial use of the assumption that the curvature of the target surface is constant (and negative), since it was necessary to know the precise form of (4.2.7) in order to prove (4.2.13). We now come to the proof of the surjectivity of q(g). Let then ϕ dz 2 ∈ Q(g). We consider the path t ϕ, t ∈ [0, 1], in Q(g). We wish to ﬁnd for each t ∈ [0, 1] a hyperbolic metric γ t on Λ, and a harmonic diﬀeomorphism ut : (Λ, g) → (Λ, γ t ) such that 2t (ut ) utz utz = t ϕ.

(4.2.14)

Let us suppose that this can be done for a certain τ ∈ [0, 1]. It follows from (4.2.7) that H(τ ) ≥ 1 (4.2.15) since H(τ ) never vanishes, so that we must have ∆ log H(τ ) ≥ 0 at a minimum of H(τ )(z). Here, as before 2t (ut (z)) t t uz uz , λ2 (z) 2 (ut (z)) t t uz uz . L(t) = t 2 λ (z)

H(t) =

4.2 Harmonic Maps and Teichm¨ uller Spaces

167

Moreover, 1 ϕϕ, λ4 so that we have, by diﬀerentiation with respect to τ , H(τ ) · L(τ ) = τ 2

˙ ) L(τ ) + H(τ ) L(τ ˙ ) = 2 τ 1 ϕ ϕ. H(τ λ4 Substitution from (4.2.16) and (4.2.17) in (4.2.7) yields ˙ ) τ2 ϕ ϕ ˙ ) H(τ 4τ ϕϕ H(τ =2 − 4 . ∆ H(τ ) H(τ ) λ4 H(τ ) λ H(τ )

(4.2.16)

(4.2.17)

(4.2.18)

Let us look at the system of equations (4.2.17), (4.2.18) more closely. As ˙ ) ˙ ) ˙ ) H(τ H(τ H(τ always, we must have ∆ H(τ ) ≤ 0 at a maximum of H(τ ) (z), and ∆ H(τ ) ≥ 0 at a minimum. Because of (4.2.15), it follows that 0≤

˙ ) H(τ ϕ(z) ϕ(z) ≤ 2 sup . H(τ ) λ4 (z) z∈Σ

Hence ˙ )(z) ≤ c H(τ )(z) 0 ≤ H(τ

(4.2.19)

with some constant c as (4.2.17) and (4.2.18) are also solvable for all τ ∈ [0, τ ] and the solutions H(τ ) depend suﬃciently well on τ . Our object now is to show that τ0 := sup { τ ∈ [0, 1] : (4.2.7) and (4.2.16) are solvable for all τ ≤ τ } (4.2.20) is in fact equal to 1. Observe that the subset of [0, 1] over which the supremum above is taken is non-empty: it contains 0 (γ 0 = g, u0 = Id). We shall show that this set is both open and closed in [0,1], and it will follow that τ0 = 1. To prove the closedness, assume that (4.2.17) and (4.2.18) are solvable for all τ < τ . Then (4.2.19) shows that the H(τ ), τ < τ , are uniformly bounded. Consider now (4.2.7), i.e. ∆ log H(τ ) = −2 + 2 ( H(τ ) − L(τ ) ) , and

(4.2.21)

1 ϕ ϕ. (4.2.22) λ4 We know by (4.2.15) that H(τ ) ≥ 1, hence L(τ ) is also bounded uniformly for τ < τ , by (4.2.22). Thus the right side of (4.2.21) is bounded by a constant independent of τ . We can thus apply the regularity theory developed in Chapter 3 to obtain bounds (independent of τ ) for H(τ ) and L(τ ). We can get C 1,α -bounds for H(τ ) from Theorem 3.5.2. Then (4.2.22) will give similar bounds for H(τ ) · L(τ ) = τ 2

168

4 Teichm¨ uller Spaces

the L(τ ). Thus the right side of (4.2.21) is in C 1,α . We then have C 3,α bounds for the H(τ ) by Corollary 3.5.1. By iteration, we obtain in this way C k,α bounds for the H(τ ) and L(τ ) for all k ∈ N. In particular, we obtain C 2,α -estimates. These estimates being uniform in τ < τ , it follows by the Ascoli-Arzel`a theorem that, for some sequence τn → τ , H(τn ) converges to a solution H(τ ) of (4.2.21). L(τ ) then is obtained from (4.2.22). This ﬁnishes the proof of the closedness assertion. To prove the openness, let us suppose that (4.2.7) and (4.2.16) are solvable for all τ ≤ τ . We must show that the system of equations is still solvable in a neighbourhood of τ . In order to do this, we shall solve the corresponding inﬁnitesimal system (4.2.17)-(4.2.18) and apply the implicit function theorem (Theorem 3.1.4). Setting ˙ ) H(τ , h := H(τ ) we must solve the equation ∆h = g · h + f

(4.2.23)

for h, g and f being given bounded C ∞ functions. But this is easy to do by the methods of § 3.3. For example, one can minimize 1 1 2 |D v| + g · v2 + f · v 2 2 over v ∈ H 1,2 (Σ). Since g := 2 H(τ ) +

2 τ2 ϕ ϕ ≥ 2 λ4 H(τ )

(cf. 4.2.15), the above quantity which we want to minimize is bounded below. Hence Theorem 3.1.3 and Corollary 3.1.1 ensure (as in § 3.3) the existence of a minimum h. Alternatively, one could solve the linear equation D v · D ϕ = − g v ϕ − f · ϕ, ϕ ∈ H 1,2 arbitrary, exactly as described in § 3.3, and obtain a solution of (4.2.23). The regularity theory of § 3.5 then implies in the usual way that h ∈ C ∞ . We have thus ˙ ) of (4.2.18), and L(τ ˙ ) is then determined by (4.2.17). found a solution H(τ By the Implicit Function Theorem 3.1.4, it follows that (4.2.7) and (4.2.16) are solvable in a neighbourhood of τ . We have thus proved the openness assertion we needed, and it follows that (4.2.7) and (4.2.16) can be solved for all τ ∈ [0, 1], in particular for τ = 1. Thus we have solutions H, L of the system of equations ∆ log H = −2 + 2 (H − L), 1 H · L = 4 ϕ ϕ. λ

(4.2.24) (4.2.25)

4.2 Harmonic Maps and Teichm¨ uller Spaces

169

And the metric we are looking for has the description ϕ dz 2 + λ2 (z) (H + L) dz dz + ϕdz 2 ,

(4.2.26)

with respect to the z-co-ordinates. We must introduce a conformal structure on Λ in which this metric takes the conformal form 2 (u) du du

(4.2.27)

such that u is harmonic with respect to this metric. By the results of § 3.11, we know that the conformal structure in which the metric (4.2.26) takes the form (4.2.27) is got by writing (4.2.26) in the 2 form σ(z) | dz + µ dz | ; the conformal local parameters for the new structure are then local diﬀeomorphic solutions of the equation uz = µ uz . In our case, an easy calculation gives µ = λ2ϕH , so that the u should satisfy uz =

ϕ uz . λ2 H

(4.2.28)

Observe that |µ| < 1

(4.2.29)

as required, since

2 2 µ = L H by (4.2.25), and H > L as the considerations in the proof of Theorem 3.10.2 show, since H never vanishes. This conformal structure has the required properties. Namely, writing d u = uz dz + uz dz etc., we see that H du du uz uz =: 2 (u) du du,

ϕ dz 2 + λ2 (H + L) dz dz + ϕ dz 2 =

so that 2 (u) uz uz = ϕ. But ϕ is holomorphic, hence 2 u 2 u 0 = ϕz = 2 (u) uz uzz + uz uz + 2 (u) uz uzz + uz uz . Since the Jacobian determinant of u with respect to z, namely uz uz −uz uz , is always positive, it follows from the above that u is harmonic. Comparison of the formulas (4.2.24) and (3.11.1) then shows that the metric 2 (u) du du has curvature −1, i.e. is hyperbolic. This concludes the proof of the surjectivity of q(g), and hence of the proof of Theorem 4.2.1.

170

4 Teichm¨ uller Spaces

We now return to the map q(g) : Tp → Q(g) which was proved to be bijective in Theorem 4.2.1. We consider the composite map q(g2 ) · q(g1 )−1 : Q(g1 ) → Q(g2 ) for two diﬀerent g1 , g2 ∈ Tp . Lemma 4.2.3 The transition maps q(g2 )·q(g1 )−1 are diﬀerentiable (of class C ∞ ). Proof.

Let ϕ dz 2 , ψ dz 2 ∈ Q(g1 ). We consider q(g2 ) · q(g1 )−1 (ψ + t ϕ) dz 2

as a function of t (∈ R) near t = 0. Let λ2 dzdz be a conformal metric on (Λ, g1 ), and ut : (Λ, g1 ) → Λ, q(g1 )−1 (ψ + t ϕ) dz 2 the harmonic diﬀeomorphism with energy density H(t) + L(t). Then the hyperbolic metric of q(g1 )−1 (ψ + t ϕ) dz 2 is (ψ + t ϕ) dz 2 + λ2 (H(t) + L(t) ) dz dz + ψ + t ϕ dz 2 . (4.2.30) We have already seen (during the proof of the surjectivity of q(g)) that H(t) and L(t) depend diﬀerentiably on t. Let v t : (Λ, g2 ) → Λ, q(g1 )−1 (ψ + t ϕ) dz 2 again be the harmonic diﬀeomorphism (homotopic to the identity). We wish to show that v t deon t. But we know the metric corresponding to q(g1 )−1 pends diﬀerentiably 2 (ψ + t ϕ) dz only in the non-conformal form (4.2.30). We must therefore express the diﬀerential equation satisﬁed by v t in terms of this non-conformal metric. To do this, we write z = x + iy and transform (4.2.30) to the real form t t t dx2 + 2 g12 dx dy + g22 dy 2 , g11

and set

g ij,t

i,j=1,2

:=

and t

i Γjk :=

t gij

−1

i,j=1,2

(matrix equation),

2 1 i,t t t t gj,k + gk,j , g − gjk, 2 =1

where t gij,k :=

∂ t g , ∂v k ij

v = v 1 + iv 2 ,

t t g21 := g12 .

(4.2.31)

4.2 Harmonic Maps and Teichm¨ uller Spaces

171

Then the diﬀerential equation which v t must satisfy as a harmonic map is ∆ v i,t +

1 t i t j,t k,t Γjk (v ) vx vx + vyj,t vyk,t = 0, 2 λ

i = 1, 2.

(4.2.32)

We suppress the computations leading to (4.2.32); they are somewhat laborious, but completely trivial. i depend diﬀerentiably on t. What is important is that the t Γjk We know from Theorem 3.9.2 that the solution v t of (4.2.32) (in the given homotopy class) is uniquely determined by t. Further, as the considerations of § 3.8 show, we can estimate the modulus of continuity of v t uniformly as t varies in a bounded set. Namely, we can control the energy of v t , i t E(v ) = (H(t)(z) + L(t)(z))λ2 (z) dzd¯ z, 2 and so, since v t is a harmonic map with values in a hyperbolic surface, Lemma 3.8.3 controls the Lipschitz constant of v t . Using the line of reasoning of the proof of Theorem 3.8.1, we may then employ the results of § 3.5 to also derive estimates independent of t for the C k,α norms (k ∈ N, α ∈ (0, 1)) of the v t . a-Ascoli theorem, (v tn ) is then a compact Let now tn → t0 . By the Arzel` family in C k . Hence a subsequence of (v tn ) will converge in C k (k ≥ 2) to a solution v t0 of (4.2.32) for t = t0 . Since v t0 is unique, the sequence (v tn ) itself must converge to v t0 , rather than a subsequence. This shows that v t depends continuously on t, and in fact does so in every C k -norm (k ∈ N). To show that v t is actually diﬀerentiable in t, we diﬀerentiate (4.2.32) t i,t with respect to t, and ﬁnd that, with ht := ∂v ∂t , the h (i = 1, 2) must satisfy the system of equations (for i = 1, 2) 1 λ2 1 − 2 λ 2 − 2 λ

∆ hi,t = −

∂ t t j,t k,t Γ (v ) vx vx + vyj,t vyk,t ∂t jk ∂ t i t ,t j,t k,t vx vx + vyj,t vyk,t Γ (v ) h ∂v jk t i j,t k,t Γjk (v t ) vxj,t hk,t x + vy hy

(4.2.33)

i i = Γkj ). This system of equations is (taking into account the symmetry Γjk linear in ht . Hence it follows in the usual way from the regularity theory developed in § 3.5 that ht is of class C ∞ . The uniqueness of the v t shows that ht is well-deﬁned. The higher t-derivatives of v t can be handled similarly. It follows that v t is (inﬁnitely) diﬀerentiable with respect to t. Hence the holomorphic quadratic t diﬀerential on (Λ, g2 ) deﬁned by v t is also C ∞ in t,∞(Λ, g2 ) deﬁned by v is ∞ −1 2 (ψ + t ϕ) dz is C in t.

also C in t, i.e. q(g2 ) · q(g1 )

172

4 Teichm¨ uller Spaces

We have thus shown that the transition maps q(g2 ) · q(g1 )−1 are of class C . Thus Tp becomes a diﬀerentiable manifold in a canonical way, since the diﬀerentiable structure induced by q(g) on Tp is independent of the choice of g. In particular, Tp becomes equipped with a topology. We have thus proved the following sharpening of the so-called Teichm¨ uller theorem: ∞

Theorem 4.2.2 Tp is diﬀeomorphic to the space Q(g) of holomorphic quadratic diﬀerentials on an arbitrary (Λ, g) ∈ Tp . We shall see in the next chapter (as a consequence of the Riemann-Roch theorem) that the dimension of Q(g) (over R) is 6p − 6 (see Cor. 5.4.3). We conclude this section by an alternative argument based on the regularity theory of Chapter 3 implying that Q(g) is ﬁnite dimensional. We may introduce a natural L2 -metric on the vector space Q(g) by putting 1 i ψ1 dz 2 , ψ2 dz 2 := dz ∧ dz ψ1 (z)ψ2 (z) 2 (4.2.34) λ (z) 2 Λ,g where λ2 (z) dzdz represents the metric g. (We multiply by λ21(z) in the integrand in order to get the correct transformation behaviour, i.e. in order to make the integrand independent of the choice of local coordinates.) Deﬁnition 4.2.1 The Hermitian product on Q(g) deﬁned by (4.2.34) is called the Weil-Petersson product. The Weil-Petersson product yields a Hermitian metric on Q(g). It is an important object for studying Tp . Here, however, we shall not explore its properties any further4 , but only use it as an auxiliary tool for the ﬁnite dimensionality of Tp . Corollary 4.2.1 Q(g), and hence also Tp , is ﬁnite dimensional. Proof. Let ψn dz 2 n∈N be a sequence in Q(g) that is bounded w.r.t. (4.2.34) ψn dz 2 , ψn dz 2 ≤ K ψn is holomorphic, i.e.

for all n ∈ N .

∂ψn = 0, ∂z

hence also ∆ ψn = 0. Thus, ψn satisﬁes an elliptic diﬀerential equation, and therefore, the regularity theory established in Chapter 3 (see § 3.4 or 3.5) implies that the ψn are also uniformly bounded for example w.r.t. the C 2 -norm. Therefore, after 4

See [Tr] in this regard.

4.3 Fenchel-Nielsen Coordinates

173

selection of a subsequence, (ψn dz 2 ) converges to a holomorphic quadratic diﬀerential ψdz 2 . In particular, Q(g) is complete w.r.t. the norm deﬁned by (4.2.34). Thus, Q(g) becomes a complex Hilbert space. If Q(g) were inﬁnite dimensional we could construct an orthonormal sequence (ψn dz 2 ) with ψn dz 2 , ψm dz 2 = δnm . Such a subsequence, however, could not contain a convergent subsequence, in contradiction to what we have just shown.

Exercises for § 4.2 1)

As an exercise in tensor calculus, derive (4.2.32).

4.3 Fenchel-Nielsen Coordinates. An Alternative Approach to the Topology of Teichm¨ uller Space In this section, we shall construct Fenchel-Nielsen coordinates on Teichm¨ uller space. They yield global coordinates and thus allow a diﬀerent and easier proof of Teichm¨ uller’s theorem than in the previous section. The previous approach, however, has the advantage of displaying the important connection between Teichm¨ uller space and holomorphic quadratic diﬀerentials. The construction proceeds by decomposing a given compact Riemann surface into simple geometric pieces. We now deﬁne the building block for this decomposition. Deﬁnition 4.3.1 A three-circle domain is a domain homeomorphic to S := z ∈ C : |z| ≤ 1, z − 12 ≥ 14 , z + 12 ≥ 14 (a disk with two holes) and equipped with a hyperbolic metric for which all three boundary curves are geodesic. (“Hyperbolic” here means that each point of S has a neighbourhood in C which is isometric to a subset of H equipped with its hyperbolic metric.) In this section, d(· , ·) will denote the distance function of the hyperbolic metric of H. Remark. In the literature, a three-circle domain is often called a “Y -piece” or a “pair of pants”. Theorem 4.3.1 The conformal (and hyperbolic) structure of a three-circle domain S is uniquely determined by the lengths of its three boundary curves c1 , c2 , c3 . Conversely, for any l1 , l2 , l3 > 0, there exists a three-circle domain S with boundary curves c1 , c2 , c3 of lengths l1 , l2 , l3 , resp.

174

4 Teichm¨ uller Spaces

For the proof of Theorem 4.3.1, we need some lemmas: Lemma 4.3.1 Let S be a three-circle domain with boundary curves c1 , c2 , c3 . For each i = j (i, j ∈ {1, 2, 3}), there exists a unique shortest geodesic arc cij from ci to cj . cij meets ci and cj orthogonally and has no self-intersections. Obviously cij = cji , but diﬀerent cij do not intersect. Proof.

We denote the hyperbolic metric on S by λ2 (z) dz dz.

For given i, j, we minimize:

λ (γ(t)) |γ(t)| ˙ dt

l(γ) := [0,1]

among all curves

γ : [0, 1] → S

with γ(0) ∈ ci , γ(1) ∈ cj . Let (γn )n∈N be a minimizing sequence. We may assume that each γn is parametrised proportionally to arclength as the length is independent of the parametrization. Moreover, l(γn ) is bounded independent of n. Therefore, the curves γn : [0, 1] → S have a uniform Lipschitz bound, and therefore, by the Arzel`a-Ascoli theorem, after selection of a subsequence converge to some curve cij : [0, 1] → S with cij (0) ∈ ci , cij (1) ∈ cj . By Fatou’s lemma l(cij ) ≤ lim inf l(γn ). n→∞

Since (γn ) was a minimizing sequence, equality has to hold, and cij is length minimizing. Since S is locally isometric to H, local pieces of cij can be identiﬁed with geodesic arcs in H. In particular, cij is smooth. By the same argument as in Euclidean geometry, cij has to meet ci and cj orthogonally, as otherwise one could construct an even shorter curve joining ci and cj . In order to show that cij has no self-intersections, suppose that there exists 0 < t1 < t2 < 1 with cij (t1 ) = cij (t2 ). Then cij = cij | [0,t1 ] ∪ cij | [t2 ,1] deﬁnes a curve connecting ci and cj which is shorter than cij . This contradiction shows that cij has no self-intersections. Similarly, suppose there exist t1 , t2 ∈ (0, 1) with cij (t1 ) = cik (t2 ) for j = k. Suppose without loss of generality that l(cij|[0,t1 ] ) ≤ l(cik|[0,t2 ] ). Then the curve cik := cij|[0,t1 ] ∪ cik|[t2 ,1] joins ci and ck and satisﬁes l(cik ) ≤ l(cik ), hence is a shortest curve in its class, and is therefore a smooth geodesic. On the other hand, cij and cik have to intersect at a nonzero angle, because a hyperbolic geodesic through a given point is uniquely determined by its tangent direction at this point so that cij and cik have to have diﬀerent tangent directions at their point of intersections as they do not coincide. Therefore, cik is not smooth, and this contradiction shows that cij and cik

4.3 Fenchel-Nielsen Coordinates

175

cannot intersect. Similarly, cij (0) = cik (0) because otherwise they would have to coincide as they both meet ci at a right angle. Finally, let us show that cij is unique. Suppose there exist two shortest curves cij and cij connecting ci and cj . By a similar argument as before, cij and cij cannot intersect.

c12

c12 c2

c1

Fig. 4.3.1.

Therefore, there exists a geodesic quadrilateral in S with sides c12 , c12 and suitable subarcs of c1 and c2 with four right angles, contradicting the Gauss-Bonnet theorem (Cor. 2.5.2).

This proves uniqueness of cij . As a consequence of Lemma 4.3.1, we can cut a three-circle domain S along the geodesic arcs c12 , c23 , c31 and obtain two hyperbolic hexagons with right angles.

c1 c12

c23 c2

c31

c31

c12

c"1 c2

c31

c12

c"2

c3 c2

c1

Fig. 4.3.2.

c23

c"2

c23

176

4 Teichm¨ uller Spaces

Lemma 4.3.2 For each λ1 , λ2 , λ3 > 0, there exists a unique hyperbolic hexagon with sides a1 , d1 , a2 , d2 , a3 , d3 (in this order) with length (ai ) = λi , i = 1, 2, 3, and all right angles. Proof. Let b0 , b1 , b2 be three hyperbolic geodesics intersecting at right angles in this order. Let the length of the segment of b1 between b0 and b2 be λ1 (i.e. λ1 is the distance between b0 and b1 ).

Fig. 4.3.3.

For each z ∈ b0 , let b(z) be the geodesic through z perpendicular to b0 . Let z0 be the point of intersection of b0 and b1 , and let z(λ1 ) be a point on b0 closest to z0 with b (z(λ1 )) ∩ b2 = ∅. We put δ(λ1 ) := d (z0 , z(λ1 )) b1

be another geodesic intersecting b0 orthogonally, and likewise We now let let b2 intersect b1 orthogonally, with distance λ2 between b0 and b2 , and we deﬁne δ(λ2 ) in the same manner as before. In the diagram above, Greek letters always denote lengths between endpoints of sides, whereas Latin minuscules label the sides. µ = µ(λ) is the distance between b2 and b2 . µ is a continuous function of λ, with µ(0) = 0, µ(∞) = ∞. Hence µ attains every positive value, in particular λ3 . This implies the existence of a hexagon with speciﬁed side lengths λ1 , λ2 , λ3 . It remains to show uniqueness. Assume that there exist two hexagons H, H with sides a1 , d1 , a2 , d2 , a3 , d3 and a1 , d1 , a2 , d2 , a3 , d3 , resp., with λi = l (ai ) = l (ai ), i = 1, 2, 3, (l denoting length), but l (d3 ) > l (d3 ), say.

4.3 Fenchel-Nielsen Coordinates

177

Fig. 4.3.4.

In a similar manner as in the proof of Lemma 4.3.1, one shows that there exists a unique shortest geodesic arc from a2 to d3 , and this arc is contained inside the hexagon H and meets a2 and d3 orthogonally. It thus divides a2 and d3 each into two subarcs of lengths α, α and δ, δ , resp..

Fig. 4.3.5.

In H , we construct perpendicular geodesics e1 , e2 through d3 at distances δ, δ from the corner points.

Since l(ai ) = l(ai ) (i = 1, 2, 3), the distance between d1 and e1 is α, and the distance between d2 and e2 is α . Therefore, the length of the subarc of a2 between d1 and e1 is at least α, and

178

4 Teichm¨ uller Spaces

Fig. 4.3.6.

the length of the subarc of a2 between d2 and e2 is at least α . Since there is a third subarc of a2 , namely the one between e1 and e2 , we conclude l(a2 ) > α + α = l(α2 ), a contradiction. This shows uniqueness.

We can now prove Theorem 4.3.1: Given S, we cut it into two hexagons along the geodesic arcs c12 , c23 , c31 of Lemma 4.3.1. Both hexagons are isometric by Lemma 4.3.2, as they have the sides c12 , c23 , c31 in common. Hence the lengths of the remaining sides are l1 l2 l3 2 , 2 , 3 . Applying Lemma 4.3.2 again, we conclude that these hexagons are uniquely determined by l1 , l2 , l3 , and so then is S as their union. Conversely, given l1 , l2 , l3 > 0, we form two corresponding hexagons with lengths l21 , l22 , l23 of alternating sides by the existence part of Lemma 4.3.2 and glue them together along the remaining sides to form a three-circle domain S with side

lengths l1 , l2 , l3 . Theorem 4.3.2 Let H/Γ be a compact Riemann surface. Then each closed curve γ0 : S 1 → H/Γ is homotopic to a unique closed geodesic c : S 1 → H/Γ . If γ0 has no self-intersections, then c is likewise free from self-intersections. Proof. Theorem 4.3.2 follows from Lemma 2.4.4 above, except for the absence of self-intersections. It can also be obtained from our familiar minimization scheme. We thus minimize 2π λ (γ(t)) |γ(t)| ˙ dt l(γ) = 0

4.3 Fenchel-Nielsen Coordinates

179

(λ2 dz dz denoting the hyperbolic metric on H/Γ ) among all curves γ : S 1 → H/Γ which are homotopic to γ0 and (w.l.o.g) parametrized proportional to arclength. As before, a minimizing sequence (γn ) satisﬁes a uniform Lipschitz bound and converges to a curve c which is locally length minimizing and hence smooth and geodesic as H/Γ is locally isometric to H. If γ0 has no self-intersections, we minimize length in the subclass of all curves without self-intersection. Again, a minimizing sequence tends to a geodesic c; c is free from self-intersections as a limit of embedded curves. Also, it is not possible that diﬀerent subarcs of c go through the same point with a common tangent direction, since a geodesic in H is uniquely determined by a point and a tangent direction at this point.

Finally, we need a little glueing lemma: Lemma 4.3.3 Let S1 , S2 be surfaces with a hyperbolic metric, and let them have boundary curves c1 , c2 resp. which are geodesic w.r.t. this metric, and suppose length (c1 ) = length (c2 ). Then one can obtain a new surface S by glueing S1 and S2 via identifying c1 and c2 according to a common arclength parameter, with arbitrary choice of initial point. S carries a hyperbolic metric which restricts to the hyperbolic metrics S1 and S2 . Proof. The claim is easily reduced to a local situation. Hence we can work in H and have to glue subregions of H along geodesic arcs of equal length. Since geodesic arcs in H are pieces of circles or straight lines, the possibility to perform this glueing is an easy consequence of the Schwarz reﬂection principle.

We can now introduce Fenchel-Nielsen coordinates on Teichm¨ uller space Tp as deﬁned in § 4.1 for hyperbolic surfaces of genus p ≥ 2. Thus, let Λ be a surface of genus p; as before in this chapter, Λ only carries the structure of a diﬀerentiable manifold and serves as the topological model in order to ﬁx the marking. We decompose Λ into 2p − 2 pieces homeomorphic to three-circle domains by cutting along simple5 closed curves δ1 , . . . , δ3p−3 as indicated in the following picture. Let now (Λ, g, f ) be an element of Tp , as in § 4.1. Then the above cut curves are homotopic to simple closed geodesics on (Λ, g, f ) by Theorem 4.3.2. It is important to note that we use the marking here to select the homotopy classes of these geodesics. We then cut (Λ, g, f ) along these geodesics (in the same manner as Λ was cut) into 2p − 2 three-circle domains S1 , . . . , S2p−2 . Each of them is uniquely determined by the lengths of its boundary curves. 5

“simple” means embedded, without self-intersections

180

4 Teichm¨ uller Spaces

Fig. 4.3.7.

Since each of the cut geodesics occurs twice in the collection of boundary curves of the Sν , we obtain 3p − 3 length functions l1 , . . . , l3p−3 : Tp → R+ . On Λ, we then choose 3p − 3 other closed curves ε1 , . . . , ε3p−3 as indicated in the following picture

Fig. 4.3.8.

In particular, ελ intersects δλ twice and is disjoint from δµ for µ = λ. Also, in each S with boundary curves c1 , c2 , c3 , we choose curves ci in such a way that ci has its end points on ci , has no self-intersections and divides Sν into two subregions, each of them containing one of the remaining boundary curves. We also orient ci in such a way that ci+1 where the index is taken mod 3p− 3 is in the left subregion. Likewise, each ci is oriented in such a way that S is to the left. By a similar argument as in the proof of Lemma 4.3.1, ci is homotopic to a unique shortest geodesic arc meeting ci orthogonally. Therefore, we may and shall assume that ci is this geodesic. We denote the initial and terminal point of ci on ci by wi and wi , resp.. As before in Lemma 4.3.1, we also consider the shortest geodesic arc cij from ci to cj with initial point zi on ci and terminal point zj on cj . As the curves

4.3 Fenchel-Nielsen Coordinates

181

Fig. 4.3.9.

ci , cij are unique, they depend continuously on the boundary lengths l1 , l2 , l3 of c1 , c2 , c3 . Given positive numbers l1 , . . . , l3p−3 , we then construct Λ (l1 , . . . , l3p−3 , 0, . . . , 0) = (Λ, g0 , f0 ) ∈ Tp as follows: We assemble three-circle domains Sν , ν = 1, . . . , 2p − 2, in the pattern described by the above decomposition of Λ. We choose Sν in such a way that the boundary curves corresponding to δλ (λ = 1, . . . , 3p − 3) have hyperbolic length lλ . Utilizing the glueing lemma 4.3.3, boundary curves are identiﬁed according to the following prescription: If two boundary curves ci,ν and cj,ν of the same Sν are to be identiﬁed as a geodesic γλ , we identify them and the curve nλ given by cij,ν in such a way that zi,ν is identiﬁed with zj,ν is homotopic to f0 (ελ ). If two boundary curves ci,ν and cj,µ with ν < µ are and require that to be identiﬁed as a geodesic γλ , we identify wi,ν and wj,µ the curve nλ obtained by ﬁrst traversing ci,ν , then moving along ci,ν in the to wj,µ and then traversing cj,µ direction given by its orientation from wi,ν becomes homotopic to f0 (ελ ). Let then l1 , . . . , l3p−3 > 0 and θ1 , . . . , θ3p−3 ∈ R be given. We ﬁrst construct (Λ, g0 , f0 ) = Λ (l1 , . . . , l3p−3 , 0, . . . , 0) as described. Each geodesic γλ is parametrized proportionally to arclength by [0, 2π]. (In order to make this consistent, we have to choose an orientation for each δλ .) For each λ, we cut Λ(l1 , . . . , 0) along γλ , obtaining two copies ci,ν , cj,µ and rotate the one with higher index ((i, ν) > (j, µ) if either ν > µ or ν = µ and i > j) against the other one by θλ and then glue them together again. If we rotate by an integer multiple of 2π along each γλ , non zero for at least one λ0 , we obtain a surface which is isometric to Λ (l1 , . . . , l3p−3 , 0, . . . , 0), but has a diﬀerent marking

182

4 Teichm¨ uller Spaces

f . Namely, we change the homotopy class of nλ0 : If θλ0 = 2 π n, then nλ0 is homotopic to f0 ελ0 δλn0 . Conversely, let (Λ, g, h) ∈ Tp be given. As already described, with the help of the marking, we determine 3p − 3 hyperbolic lengths l1 , . . . , l3p−3 , by cutting it into 2p − 2 three-circle domains Sν . We obtain distinguished points , zi,ν , zi,ν (i = 1, 2, 3, ν = 1, . . . , 2p − 2). For each hyperbolic geowi,ν , wi,ν desic γλ , λ = 1, . . . , 3p − 3, we can directly determine θλ mod2π as the oriented angle between appropriate distinguished points as above. In order to determine θλ completely and not only mod 2π, we choose θλ0 ∈ [0, 2π] with 0 =: (Λ, g, h0 ) as θλ0 ≡ θλ mod 2π and construct Λ l1 , . . . , l3p−3 , θ10 , . . . , θ3p−3 before. For each λ, we then determine n = nλ ∈ Z such that nλ is homotopic to h0 (ελ δλn ). Since the homotopy class of the arc determining nλ inside each Sν is ﬁxed, the only way the homotopy class of nλ can possibly vary is through the glueing operation of boundaries of Sν ’s. This glueing, however, can aﬀect the homotopy class only by multiples of γλ , which is in the homotopy class determined by δλ . We then put θλ = θλ0 + 2 π nλ , and obtain (Λ, g, h) = Λ (l1 , . . . , l3p−3 , θ1 , . . . , θ3p−3 ) . As a consequence, we have a well-deﬁned map 3p−3 × R3p−3 , (l1 , . . . , l3p−3 , θ1 , . . . , θ3p−3 ) : Tp → R+ and obtain Theorem 4.3.3 3p−3 × R3p−3 (l1 , . . . , l3p−3 , θ1 , . . . , θ3p−3 ) : Tp → R+ is bijective. Proof. Let us again summarize the main steps of the proof: The map is surjective, because given l1 , . . . , θ3p−3 , we can construct Λ(l1 , . . . , θ3p−3 ) with these data. It is injective, because the lengths parameters determine the geometry of the three-circle domains into which the surface is cut by Theorem 4.3.1, and the angle parameters determine the glueing of the three-circle domains.

Deﬁnition 4.3.2 l1 , . . . , l3p−3 , θ1 , . . . , θ3p−3 are called Fenchel-Nielsen coordinates. Our introduction of Fenchel-Nielsen coordinates depends on certain choices. It is however not too hard (but quite lengthy) to verify that for diﬀerent 3p−3 × R3p−3 which are homeochoices we get transition maps from (R+ ) morphisms. (Actually, they are even real analytic diﬀeomorphisms.) Thus, one can use Fenchel-Nielsen coordinates to deﬁne a topological structure on

4.4 Uniformization of Compact Riemann Surfaces

183

Teichm¨ uller space. Again, it is possible to verify that this topological structure coincides with the one deﬁned in the previous section. We defer all relevant proofs to the exercises. Let us mention one further piece of terminology: Deﬁnition 4.3.3 The operation of cutting a surface along a closed curve γ without self-intersections, rotating the two resulting curves against each other by an integer multiple of 2π and glueing them together again, is called a Dehn twist along γ. Fenchel-Nielsen coordinates yield a partial compactiﬁcation of Tp by allowing the length parameters lλ to become zero. If lλ tends to 0, the hyperbolic geodesic γλ degenerates to a point, and the limiting surface either becomes disconnected or has one fewer handle than the original one. Also, for lλ = 0, θλ becomes indetermined in polar coordinates when the radius is zero. (Actually, by allowing some lλ to become negative, we may even include nonorientable surfaces.) Here, however, we cannot pursue this interesting topic any further, but refer instead to [Ab].

Exercises for § 4.3 1)

∗

2)

List all choices involved in our construction of Fenchel-Nielsen coordinates. Show that one can use Fenchel-Nielsen coordinates to deﬁne a topological structure on Teichm¨ uller space independent of all such choices. Show that Fenchel-Nielsen coordinates yield a homeomorphism from Teichm¨ uller space Tp onto (R+ )3p−3 × R3p−3 .

4.4 Uniformization of Compact Riemann Surfaces The uniformization theorem for compact Riemann surfaces is Theorem 4.4.1 Let Σ1 be a compact Riemann surface of genus p. Then there exists a conformal diﬀeomorphism f : Σ1 → Σ2 where Σ2 is (i) a compact Riemann surface of the form H/Γ as in Thm. 2.4.3. in case p≥2 (ii) a compact Riemann surface C/M as in § 2.7 in case p = 1 (iii) the Riemann sphere S 2 in case p = 0.

184

4 Teichm¨ uller Spaces

A direct corollary of Thm. 4.4.1 is Corollary 4.4.1 The universal cover of a compact Riemann surface is con

formally equivalent to S 2 , C or the unit disk D. Proof of Theorem 4.4.1. We know from Cor. 2.4.A.2 that Σ1 is always homeomorphic to one of the types occuring in the statement. We start with case (i): p ≥ 2. By Thm. 2.4.3, Σ1 then is homeomorphic to a hyperbolic Riemann surface S. S thus carries a metric of constant negative curvature. By Thm. 3.7.1, a homeomorphism from Σ1 to S can be deformed into a harmonic map u : Σ1 → S. u then has degree ±1, since a homeomorphism has degree ±1 and the degree is not changed under homotopies. In fact, one easily veriﬁes that there always exists a homeomorphism i0 : S → S of degree −1, and if the original homeomorphism had degree −1, its composition with i0 then has degree 1. Thus, we may always ﬁnd a harmonic u : Σ1 → S of degree 1. By Thm. 3.10.2, u then is a diﬀeomorphism. As before u induces a holomorphic quadratic diﬀerential ψ on Σ1 . We put S = S1 , u =: u1 , and the strategy now is to ﬁnd a harmonic diﬀeomorphism ut : Σ1 → St onto a hyperbolic Riemann surface St with induced holomorphic quadratic diﬀerential tψ for all t ∈ [0, 1]. For t = 0 the map u0 : Σ1 → S0 then is a conformal diﬀeomorphism, since the associated holomorphic quadratic diﬀerential vanishes (cf. Lemma 4.2.2). Putting Σ2 = S1 then ﬁnishes the proof in case (i). Similar to the proof of Thm. 4.2.1, we are going to show that (4.4.1) t0 := inf t ∈ [0, 1] : ut , St exist for all t ≥ t = 0. Again, the set over which the inﬁmum is taken, is nonempty because it contains t = 1. This set is again open by an implicit function theorem argument. The interesting point is closedness. We equip Σ1 with an arbitrary smooth conformal Riemannian metric which we write again as λ2 (z) dzdz in local coordinates, although its curvature need no longer be −1. The image metric again is denoted by 2 (ut ) dut dut and with ut , we again associate the expressions 2 (ut (z)) t t uz uz λ2 (z) 2 (ut (z)) t t L(t) = uz uz . λ2 (z)

H(t) =

4.4 Uniformization of Compact Riemann Surfaces

185

We have H(t) L(t) = t2

1 ψψ λ4

(4.4.2)

as in (4.2.16). Diﬀerentiating w.r.t. t yields 2 1 ˙ ˙ H(t) L(t) + H(t) L(t) = 2t 4 ψψ = H(t) L(t). λ t

(4.4.3)

Lemma 3.10.1 gives ∆ log H(t) = 2K1 + 2 (H(t) − L(t))

(4.4.4)

since the curvature of St is −1. K1 here denotes the curvature of Σ1 . Diﬀerentiating (4.4.4) w.r.t t and using (4.4.3) yields ∆

˙ ˙ H(t) 2 H(t) =2 (H(t) + L(t)) − L(t). H(t) H(t) t ˙

(4.4.5) ˙

H(t) H(t) Again, we must have ∆ H(t) (z1 ) ≥ 0 at a point z1 where H(t) (z1 ) achieves its minimum. Since L(t) ≥ 0 by deﬁnition of L, we conclude

˙ H(t)(z) ≥0

(4.4.6)

for all z. Therefore H(t) ≤ H(1)

whenever 0 < t < 1.

(4.4.7)

From the proof of Thm. 3.10.2, we also know 0 ≤ L(t) < H(t). Therefore, we may use regularity theory as in the proof of Thm. 4.2.1, in order to obtain higher order bounds for solutions H(t), L(t) of the system (4.4.2), (4.4.4) uniformly for all t ∈ [0, 1] and conclude closedness of the set occuring in (4.4.1). We infer t0 = 0 as desired. This concludes the proof in case (i). Case (ii) is simpler than case (i). We may use the same strategy as before. This time, the surfaces St may all be represented by quotients of C and hence carry metrics with curvature = 0. Therefore instead of (4.4.4), we have in the preceding notations (4.4.8) ∆ log H(t) = 2K1 and consequently ∆

˙ H(t) = 0. H(t)

(4.4.9)

186

4 Teichm¨ uller Spaces ˙

H(t) Thus, H(t) is a harmonic function on the compact Riemann surface Σ1 , hence constant. This means

˙ H(t)(z) = c H(t)(z)

for some constant c.

We again obtain bounds for H(t) and L(t) and may proceed as in case (i). (It might be a good exercise for the reader to write down all the details of the reasoning for case (ii).) Case (iii) will be shown in Cor. 5.4.1 below as a consequence of the Riemann-Roch Theorem.

Remark. The case p = 1 of the uniformization theorem can also be deduced from the Jacobi Inversion Theorem in § 5.9 below (see the exercises for that §).

Exercises for § 4.4 1) 2)

∗

3)

Carry out the details of the proof of Thm. 4.4.1 for the case p = 1. Let Σ be a Riemann surface with boundary curves γ1 , . . . , γk . Show that there exists a constant curvature metric on Σ for which all γj (j = 1, . . . , k) are geodesic. Conclude that there exists a compact Riemann surface Σ without boundary with an anti-conformal involution i : Σ → Σ, obtained by identifying Σ and a copy Σ of Σ with the opposite conformal structure along their boundaries, with i(Σ) = Σ . Σ is called the Schottky double of Σ. Let (Σ, g) be a Riemann surface with boundary curves γ1 , . . . , γk and a hyperbolic metric g, for which all boundary curves are geodesic. Deﬁne a Schottky double Σ as in exercise 2). Deﬁne a Teichm¨ uller space for surfaces of the topological type of Σ, always requiring that the boundary curves are geodesic w.r.t. a hyperbolic metric. If (Σ, g) and (Σ , g ) are two such surfaces look at harmonic diﬀeomorphisms u between the Schottky doubles. If i : Σ → Σ and i : Σ → Σ are the corresponding involutions show that if u ◦ i and i ◦ u are homotopic, they have to coincide. Use this to deﬁne harmonic maps (Σ, g) → (Σ , g ) (alternatively, you can also make use of the result of exercise 4) in § 3.7). Show that the associated holomorphic quadratic diﬀerential is real on ∂Σ if u satisﬁes the reﬂection property u ◦ i = i ◦ u. On the basis of these observations, develop a Teichm¨ uller theory for surfaces with boundary in an analogous way as in § 4.2.

5 Geometric Structures on Riemann Surfaces

5.1 Preliminaries: Cohomology and Homology Groups Let M be a diﬀerentiable manifold of dimension d. We would ﬁrst like to recall some basic properties of diﬀerential forms on such a manifold. A diﬀerential form is an object of the form ωi1 ...ij dxi1 ∧ · · · ∧ dxij , ω= 1≤i1 <···
where x1 , . . . , xd are local coordinates on M ; j is called the degree of ω. The ωi1 ...ij are real-valued diﬀerentiable functions. The transformation behaviour under coordinate changes is determined by the transformation rules for exterior diﬀerential forms. If y 1 , . . . , y d are other local coordinates, then d ∂xi k dxi = k=1 ∂y k dy , and ω then is represented in these coordinates as ω=

d

1≤i1 <···≤d k1 =1

···

d

ωi1 ...ij

kj =1

∂xij ∂xi1 dy k1 ∧ · · · ∧ kj dy kj . k 1 ∂y ∂y

The exterior derivative of ω is the form of degree j + 1 deﬁned by ∂ dω := ωi ...i dxi0 ∧ dxi1 ∧ · · · ∧ dxij . ∂xi0 1 j i0 =1,...,d

1≤i1 <···
We have (by a somewhat tedious, but straightforward computation) d2 = 0.

(5.1.1)

(d2 of course simply is an abbreviation of d ◦ d, the operator d on j-forms composed with the operator d on (j + 1)-forms.) A diﬀerential form ω is said to be closed if dω = 0, and exact if there exists a form α (of degree j − 1) such that dα = ω. By (5.1.1), every exact form is closed.

188

5 Geometric Structures on Riemann Surfaces

Deﬁnition 5.1.1 The j-th (de Rham) cohomology group of M is deﬁned as {closed diﬀerential forms of degree j} . H j (M, R) := {exact diﬀerential forms of degree j} This means that we consider equivalence classes of diﬀerential forms of degree j, where two such forms ω1 , ω2 are equivalent iﬀ there exists a form α with ω1 − ω2 = dα. Thus, H j (M, R) is constructed by identifying closed diﬀerential forms which diﬀer from each other by an exact form. H j (M, R) is indeed a group because the exact diﬀerential forms constitute a normal subgroup of the closed ones. Naturally, the group of operation is addition. H j (M, R) is in fact a vector space over R, since a form can be multiplied by real scalars, and closedness and exactness are not aﬀected. Also, d induces a group homomorphism d : H j (M, R) → H j+1 (M, R). The homology groups are deﬁned in a manner dual to the above. A j-chain of M is a ﬁnite linear combination (with real coeﬃcients) of diﬀerentiable maps of a j-dimensional simplex into M . A simplex carries an orientation; using this, we can deﬁne a boundary operator ∂ on chains. Let us explain this: If e.g. (P1 , P2 , P3 ) is the oriented triangle bounded by the oriented edges (P1 , P2 ), (P2 , P3 ) and (P3 , P1 ), then ∂(P1 , P2 , P3 ) = (P2 , P3 ) − (P1 , P3 ) + (P1 , P2 ). Here, the minus sign denotes reversal of orientation; thus −(P1 , P3 ) = (P3 , P1 ). Similarly, ∂(P1 , P2 ) = (P2 ) − (P1 ). The ∂ thus deﬁned on simplices can be extended by linearity to a boundary operator on chains of M , and satisﬁes ∂ 2 = 0.

(5.1.2)

A chain C with ∂C = 0 is called a cycle, and a chain of the form C = ∂C a boundary. Deﬁnition 5.1.2 The j-th homology group of M (with coeﬃcients in R) is deﬁned as {j-dimensional cycles } . Hj (M, R) := {j-dimensional boundaries } Instead of real coeﬃcients, we can also take the coeﬃcients in an arbitrary abelian group G. We then obtain the corresponding homology group Hj (M, G). Specially important for us are the groups Hj (M, Z), the homology groups with integral coeﬃcients. Let us also note that the homology and cohomology groups deﬁned above are always abelian.

5.1 Preliminaries: Cohomology and Homology Groups

189

The relation between chains and cochains is given by Stokes’ theorem: ω= dω (5.1.3) ∂C

C

for any form ω of degree j, and any (j + 1)-chain C. The so-called Poincar´e lemma asserts that a closed form on a star-shaped open set in Rd is always exact. Thus closed forms are locally exact, since every point of M has neighborhoods diﬀeomorphic to star-shaped open sets. We examine this brieﬂy in the case of 1-forms (which is the only case of interest to us): d Let ω = i=1 ω i dxi . If dω = 0, then ∂ω j ∂ω i = , j ∂x ∂xi

i, j = 1, . . . , d.

By Frobenius’ theorem, there exists locally a function f such that ωi =

∂f . ∂xi

(5.1.4)

Such an f is unique up to an additive constant. If now γ : [0, 1] → M is a diﬀerentiable path, we can ﬁnd a function f in a neighborhood of γ([0, 1]) with df = ω (i.e. f satisﬁes (5.1.4)), assuming of course that dω = 0. By Stokes’ theorem, we will then have ω = f (γ(1)) − f (γ(0)). γ

However, the function f above need not be single-valued if γ has double points. If γ is closed, i.e. γ(0) = γ(1), then we call γ ω the period of ω along γ. If however ω is exact, so that ω = df with a single-valued f , then all periods of ω must vanish, since ω = f (γ(1)) − f (γ(0)) = 0. γ

Conversely, a (closed) form ω all of whose periods vanish is in fact exact, since any f with df = ω in the neighborhood of a path is in fact single-valued. The important point about this criterion for exactness is that the period ω of a closed form ω depends only on the homology class of the closed γ path γ. For, if γ1 and γ2 are homologous, so that γ1 − γ2 = δC, then ω− ω= dω (by Stokes’ theorem) γ1

γ2

C

= 0,

since ω is closed.

190

5 Geometric Structures on Riemann Surfaces

We shall restrict ourselves from now on to the case when M is twodimensional, i.e. a surface. The constructions presented below can in fact be suitably generalised to the higher-dimensional case, but there are some technical complications. Let then γ be an oriented, two-sided, double-point free, diﬀerentiable closed curve on M (“two-sided” means that we can distinguish globally along γ between normal vectors pointing to the left and those pointing to the right; “double-point free” means that γ has no self-intersections). Since γ is compact, we can ﬁnd an annular region A containing γ in its interior. Since γ is two-sided, A will be separated by γ into a left side A− and a right side A+ . We choose another annular region A0 containing γ and contained in the interior of A; let A− 0 denote the region to the left of γ in A0 . We now choose a real-valued C ∞ function on M \γ such that 1, z ∈ A− 0 f (z) = 0, z ∈ M \A− ,

and deﬁne

df (z), 0,

ηγ (z) :=

z ∈ A\γ z ∈ γ or z ∈ M \A.

Then ηγ is a 1-form of class C ∞ on M (1-form just means a diﬀerential form of degree 1), although the function f itself has a jump of height 1 across γ. Although ηγ is closed, it is not in general exact (it will turn out that ηγ is exact if and only if γ is null-homologous, i.e. represents 0 in H1 (M, R)). We shall refer to ηγ as the 1-form dual to γ. If γ is not double-pointfree, one can still construct such a dual 1-form ηγ ; in a neighborhood of a double point, one simply adds up the local dual 1-forms coming from the diﬀerent branches of γ. This notion of duality is justiﬁed by the following lemma: Lemma 5.1.1 Let ω be a closed 1-form, and ηγ the 1-form dual to the closed two-sided curve γ. Then ηγ ∧ ω.

ω= γ

Proof.

(5.1.5)

M

ηγ ∧ ω =

M

A

−

A

−

= =

df ∧ ω d(f ω) −

A−

d(f ω) A−

=

(since dω = 0)

fω = ∂A−

f ∧ dω

ω. γ

5.1 Preliminaries: Cohomology and Homology Groups

191

Suppose now that g : [0, 1] → A is a diﬀerentiable curve with g(0) ∈ ∂A ∩ ∂A− , g(1) ∈ ∂A ∩ ∂A+ . Then g ∩ A− breaks up into ﬁnitely many sub-arcs g0 , g1 , . . . , gm , where g0 has initial point g(0), while all the other gi have both their initial and end points on γ. Hence ηγ = df = 1 − 0 = 1, g g 0 0 ηγ = df = 1 − 1 = 0, i = 1, . . . , m, gi

gi

so that

ηγ = g

m j=0

ηγ = 1.

gj

If on the other hand g had its initial point on δA ∩ δA+ and its end-point on δA ∩ δA− , we would have had ηγ = −1. g

If γ

is a second closed curve on M , then the number ηγ

γ measures how often γ˜ intersects γ, an intersection being considered positive when a sub-arc of γ˜ goes from ∂A∩∂A− to ∂A∩∂A+ , and negative otherwise. However, this geometric interpretation is valid only when all the intersections of γ

and γ are transversal, i.e. at a non-zero angle. η depends only on the homology class of γ

. If γ

is also Since ηγ is closed,

γ γ two-sided, then we can construct η

too, and γ

ηγ = η

∧ ηγ = − η

(5.1.6) γ γ

γ M γ η depends likewise only on the homology class by Lemma 5.1.1. Hence

γ γ of γ. We shall say that a surface is orientable if all closed curves on it are twosided1 . For example, a Riemann surface is always orientable, since one can 1

It is not hard to check that this is equivalent to the requirement of Def. 2.4.A.1 (for the case of a surface) although this will not be needed in the sequel.

192

5 Geometric Structures on Riemann Surfaces

always distinguish a left and a right side for an oriented arc in C, hence for an (oriented) arc in a local chart, and since all coordinate changes are conformal (and therefore cannot interchange left and right). We may thus make the following deﬁnition: Deﬁnition 5.1.3 Let M be an oriented diﬀerentiable surface, and a, b ∈ H1 (M, Z), represented by closed curves γ1 and γ2 respectively. Then the intersection number of a and b is deﬁned as (5.1.7) ηγ2 = ηγ1 ∧ ηγ2 = − ηγ1 . a · b := γ1

M

γ2

It is clear from the preceding discussion that a · b ∈ Z,

(5.1.8)

a · b = −b · a,

(5.1.9)

(a + b) · c = a · c + b · c

(5.1.10)

and (“+” on the left side of (5.1.10) stands for addition in H1 (M, Z), that on the right for addition in Z). We have thus constructed by means of the intersection number a bilinear anti-symmetric map H1 (M, Z) × H1 (M, Z) → Z. We shall now determine the ﬁrst homology group of a compact Riemann surface Σ of genus p. To this end, we begin by observing that freely homotopic closed curves are homologous. Indeed, let γ0 : S 1 → Σ and γ1 : S 1 → Σ be two closed curves in Σ (S 1 being the interval [0, 1] with its end-points identiﬁed), and H : A := S 1 × [0, 1] → Σ a homotopy between them (so that H(t, 0) = γ0 (t) and H(t, 1) = γ1 (t) for all t ∈ S 1 ). Then γ0 − γ1 = δH(A), so that γ0 and γ1 are homologous as asserted. The converse is however false in general: since homology groups are always abelian, any curve γ whose homotopy class is of the form aba−1 b−1 (a, b ∈ π1 (Σ, z0 )) is always null-homologous, but not necessarily null-homotopic, since the fundamental group of a surface of genus p ≥ 2 is not abelian (Corollary 2.4.2). If p = 0, then π1 (Σ, z0 ) = 0, hence we also have H1 (Σ, Z) = 0. If p ≥ 1, then Σ can be described by a fundamental polygon (cf. Theorem 2.4.2 if p ≥ 2; the case p = 1 is similar, but easier): By moving the side ai slightly, we can get rid of its intersections with all the other sides except bi ; ai and bi intersect exactly once, transversally and with

5.1 Preliminaries: Cohomology and Homology Groups

193

Fig. 5.1.1.

intersection number 1. Conversely, one can also arrange that bi meets only ai ; the intersection number will naturally be −1 (cf.(5.1.9)). Thus 1, i = j , (5.1.11) ai · bj = δij = 0, i = j ai · aj = bi · bj = 0 for all i, j = 1, 2, . . . , p. In particular, a1 , . . . , ap , b1 , . . . , bp all represent diﬀerent homology classes, since they are distinguished from one another by the intersection numbers. Now, we know that the ai , bi generate π1 (Σ, z0 ), and we have already observed that homotopic curves are also homologous. Hence a1 , . . . , bp also generate H1 (Σ, Z), and it follows from (5.1.11) that H1 (Σ, Z) = Z2p .

(5.1.12)

(This is a special case of a theorem of van Kampen, according to which H1 (M, Z) =

π1 (M, p0 ) −1 −1 {aba b : a, b ∈ π1 (M, p0 )}

for all manifolds M ; here the denominator is the commutator subgroup, namely the subgroup of π1 (M, p0 ) generated by all elements of the form aba−1 b−1 . Thus the ﬁrst homology group is the fundamental group “made commutative”.) Similarly, we also have (5.1.13) H1 (Σ, R) = R2p . We shall refer to the ai , bi , i = 1, . . . , p, as a canonical basis for the homology of Σ. We can now also determine the ﬁrst cohomology group H 1 (Σ, R). To do this, we consider the map P : H 1 (Σ, R) → R2p

194

5 Geometric Structures on Riemann Surfaces

deﬁned by

P (ω) :=

ω, . . . , a1

ω, ap

ω, . . . , b1

ω . bp

Thus P (ω) is the vector of periods of ω with respect to a canonical homology basis. The map P is obviously a linear map of vector spaces. It is injective, since a closed 1-form all of whose periods vanish is exact, i.e. represents the zero element of H 1 (Σ, R), as already observed. But it is also surjective, since the images of the ηai , ηbi generate R2p , where ηγ denotes as before the 1-form dual to the closed curve γ. This follows from the deﬁnition of the intersection number (cf. (5.1.7)), and the relations (5.1.11). Explicitly, ηaj = 0 = ηbj , ai bi ηbj = δij = − ηaj ai

bi

(i, j = 1, . . . , p). To summarize, we have proved: Theorem 5.1.1 Let Σ be a compact orientable surface of genus p. Then H1 (Σ, R) and H 1 (Σ, R) are both isomorphic to R2p ; they are dual to each other via integration, in the sense that every linear functional on H1 (Σ, R) is of the form a→

ω a

for a (unique) ω ∈ H 1 (Σ, R).

Also, the intersection pairing H1 (Σ, Z) × H1 (Σ, Z) → Z is unimodular, i.e. every homomorphism H1 (Σ, Z) → Z is of the form a→a·b with a b ∈ H1 (Σ, Z). The map a → a ηb corresponds to b. Finally, the exterior product of diﬀerential forms is dual to the intersection pairing of homology classes: ηa ∧ ηb = a · b Σ

(This is a special case of Poincar´e duality: on any compact orientable diﬀerentiable manifold of dimension d (we have deﬁned the concept of orientability only for d = 2), one can deﬁne an intersection pairing Hk (M, Z) × Hd−k (M, Z) → Z;

5.2 Harmonic and Holomorphic Diﬀerential Forms on Riemann Surfaces

195

this pairing is unimodular in the sense that every homomorphism Hk (M, Z) → Z can be realised as the intersection with an α ∈ Hd−k (M, Z). And again H k (M, R) is isomorphic to the space of linear functionals Hk (M, R) → R. We note by the way that H k (M, Z) is usually deﬁned as the group of homomorphisms Hk (M, Z) → Z. That the de Rham cohomology group H k (M, R) deﬁned by means of diﬀerential forms coincides with the space of linear functionals Hk (M, R) → R is the content of de Rham’s theorem. We must also mention that, in the general case, one should be somewhat more careful when comparing cohomology with coeﬃcients in Z with that with coeﬃcients in R. For example, there exist (for suitable manifolds M ) homology classes α = 0 in Hk (M, Z) with mα = 0 for some m (= 0) in Z. Such an α necessarily 1 (mα) in Hk (M, R) represents the zero element of Hk (M, R), since α = m 1 (because m ∈ R). Such an α is called a torsion class.)

Exercises for § 5.1 1) 2)

Determine the ﬁrst homology group of a k-circle domain, i.e. a domain homeomorphic to a disk with k − 1 disjoint interior subdisks removed. Show that if f : M1 → M2 is a smooth map between compact manifolds, then for each k, there are natural group homomorphisms f∗ : Hk (M1 , Z) → Hk (M2 , Z) f ∗ : H k (M2 , Z) → H k (M1 , Z)

5.2 Harmonic and Holomorphic Diﬀerential Forms on Riemann Surfaces In the previous section, we did not need a complex structure on Σ. We shall now start making essential use of the complex structure. Let then Σ be a Riemann surface, z = x + iy a local conformal parameter, and λ2 (z) dz dz a metric on Σ. (The existence of such a metric was shown in § 2.3.) We use the usual conventions for diﬀerential forms. Thus dz = dx + i dy dz = dx − i dy,

196

5 Geometric Structures on Riemann Surfaces

so that dz ∧ dz = −2i dx ∧ dy. From now on, we shall be working with complex-valued forms. We shall refer to i ω := λ2 (z) dx ∧ dy = λ2 (z) dz ∧ dz (5.2.1) 2 as the fundamental 2-form or the K¨ ahler form of the metric. The conjugation operator, or -operator, on forms is deﬁned as follows: for a function f : Σ → C, f (z) := f (z)λ2 (z) dx ∧ dy = f ω;

(5.2.2)

for a one-form α = f dx + gdy, α := −g dx + f dy

(5.2.3)

or, in complex notation, with α = u dz + v dz, α = −iu dz + iv dz;

(5.2.4)

and for a 2-form η = h(z)dx ∧ dy, η(z) :=

1 h(z). λ2 (z)

(5.2.5)

It is easy to verify, for example, that α is indeed a 1-form, i.e. transforms correctly under coordinate changes. Observe that the of a 1-form is deﬁned independently of the metric. Thus, for some of the following considerations (which are concerned only with one-forms), the existence of a metric on Σ is not relevant. We can deﬁne a scalar product on the vector space of k-forms by α1 ∧ α2 , (5.2.6) (α1 , α2 ) := Σ

and thus obtain the Hilbert space A2k := {k-forms α with measurable coeﬃcients and (α, α) < ∞} of square-integrable k-forms. For instance, if α is a 1-form, α = u dz + v dz in local coordinates, then α ∧ α = i (uu + vv) dz ∧ dz 2

2

= 2 (|u| + |v| ) dx ∧ dy,

(5.2.7)

5.2 Harmonic and Holomorphic Diﬀerential Forms on Riemann Surfaces

197

so that the scalar product is indeed positive deﬁnite. It is also easy to check by simple computation that (· , ·) is bilinear, and that (5.2.8) (α1 , α2 ) = λ(α2 , α1 ), as also ( α1 , α2 ) = (α1 , α2 ). (5.2.9) Thus the -operator is an isometry of A2k into A22−k . It is also onto, since clearly (5.2.10) = (−1)k . 2 2 Further, if α1 ∈ Ak and α2 ∈ Ak+1 are diﬀerentiable, and Σ is compact, then dα1 ∧ α2 = (−1)k+1 α1 ∧ d( α2 ) + d(α1 ∧ α2 ) Σ Σ = (−1)k+1 α1 ∧ d( α2 ) Σ =− α1 ∧ ( d α2 )

(dα1 , α2 ) =

Σ

Σ

= −(α1 , d α2 )

(5.2.11)

(we have used (5.2.10) for (2 − k)-forms). Thus, setting d := − d ,

(5.2.12)

we have, under the above assumptions, (dα1 , α2 ) = (α1 , d α2 ).

(5.2.13)

Hence d is the operator adjoint to d with respect to (· , ·), although only in a formal sense, since d : A2k → A2k+1 is an unbounded (densely deﬁned) operator. It should be noted that even for one-forms, the deﬁnition of d depends on the choice of a metric. We compute for a C 2 function f on Σ: d df = d (fz dz + fz dz) (5.2.14) = − d(−ifz dz + ifz dz) = − (2ifzz dz ∧ dz) fzz = −4 2 . λ Thus, on functions, d d is up to sign just the Laplace-Beltrami operator. A form α is said to be co-closed if d α = 0,

198

5 Geometric Structures on Riemann Surfaces

and co-exact if α = d η (for some η). A 1-form α is said to be harmonic if it is locally of the form α = df with f a harmonic function, and holomorphic if it is locally of the form α = dh with h holomorphic. Lemma 5.2.1 α represented locally as udz +vdz is holomorphic if and only if v ≡ 0 and u is a holomorphic function. Proof.

Trivial.

Lemma 5.2.2 A 1-form η is harmonic if and only if dη = 0 = d η Proof. If η = df (locally), then dη = 0; if, moreover, f is harmonic, then d η = d df = 0 by (5.2.14). Conversely, if dη = 0, then η = df locally. If

d η also vanishes, then d df = 0, so that f is harmonic by (5.2.14). Lemma 5.2.3 A 1-form η is harmonic if and only if it is of the form η = α1 + α 2 ,

α1 , α2 holomorphic.

A 1-form α is holomorphic if and only if it is of the form α = η + i η, Proof.

η harmonic.

Let η = udz + vdz. Then dη = −(uz − vz ) dz ∧ dz, 2 d η = − 2 (uz + vz ), λ

hence η is harmonic precisely when both u and v are holomorphic. Suppose now that α is holomorphic. Then α and α are harmonic, and α=

−iα − iα α−α +i . 2 2

Finally, if η is harmonic, then η = α1 + α2 with the αi holomorphic as we have seen above, and then η + i η = 2α1 is indeed holomorphic.

5.2 Harmonic and Holomorphic Diﬀerential Forms on Riemann Surfaces

199

We now wish to give an L2 -characterisation of harmonic 1-forms. For this purpose, let B be the L2 -closure of {df : f ∈ C0∞ (Σ, C)}, and B that of Then

{ df : f ∈ C0∞ (Σ, C)}.

B ⊥ = {α ∈ A21 (Σ) : (α, df ) = 0 ∀f ∈ C0∞ (Σ, C)}

and B ⊥ = {α ∈ A21 (Σ) : (α, df ) = 0

∀f ∈ C0∞ (Σ, C)}.

Lemma 5.2.4 Let α ∈ A21 be of class C 1 . Then:

Proof.

α ∈ B ⊥ ⇔ dα = 0,

(5.2.15)

α ∈ B ⊥ ⇔ d α = 0.

(5.2.16)

If f has compact support, then 0= d(f α) = df ∧ α + f dα. Σ

Σ

Σ

Hence, if dα = 0, then df ∧ α = −(df, α) = −( df, 0=

α)

Σ

= ( df, α) = λ(α, df ) = (α, df )

(5.2.17)

(cf. (5.2.8), (5.2.9) and (5.2.10), and note that and d are real operators). Conversely, if α ∈ B ⊥ , then df ∧ α = 0 for all f with compact support, hence also f dα = 0 for all such f , so that dα = 0. The proof of (5.2.16) is similar.

Corollary 5.2.1 B and B are orthogonal to each other. Thus we have an orthogonal decomposition A21 (Σ) = B ⊕ B ⊕ H

(5.2.18)

with H = B ⊥ ∩ B ⊥ . Theorem 5.2.1 H consists precisely of the harmonic 1-forms α with (α, α) < ∞. Proof. If α is harmonic, then it is in particular of class C 1 , and closed as well as co-closed. Hence α ∈ H if (α, α) < ∞, by Lemma 5.2.4.

200

5 Geometric Structures on Riemann Surfaces

Conversely suppose α ∈ H. The argument employed in § 3.4 (Weyl’s lemma) then shows that α is smooth and harmonic. Let us brieﬂy recall the construction. Let U be a coordinate neighborhood with local parameter z = x + iy, f ∈ C0∞ (U, C), ϕ := fx ,

ψ := fy

(so that ψx = ϕy ). Let α = p dx + q dy ⊥

in U . Since α ∈ B , we have

0 = (α, dϕ) =

(pϕx + qϕy ) dx ∧ dy,

(5.2.19)

(−pψy + qψx ) dx ∧ dy,

(5.2.20)

U

and similarly, since α ∈ B ⊥ ,

0 = (α, dψ) = U

therefore 0 = (α, dϕ − dψ) p(ϕx + ψy ) dx ∧ dy = p · ∆f dx ∧ dy. = U

(5.2.21)

U

We now wish to verify that these relations continue to hold for the smoothings of α. Since we are considering only those f with compact support in U , we need to do the smoothing only in U . As in § 3.1, let c exp |z|21−1 , |z| < 1, (z) := 0, |z| ≥ 1 with (z) = 1 (we may assume without loss of generality that {|z| ≤ 1} ⊂ U ). For h > 0, we have i 1 z−ζ p(ζ) dζ ∧ dζ. ph (z) = 2 h R2 h 2 Here we are letting the integration range over all of R2 since, if we assume say |z| ≤ 1, then the integrand above vanishes outside U if h is suﬃciently small. We have i (w) p(z − hw) dw ∧ dw. ph (z) = 2 |w|≤1

5.2 Harmonic and Holomorphic Diﬀerential Forms on Riemann Surfaces

201

Hence i ph (z)(ϕx (z) + ψy (z)) dz ∧ dz (5.2.22) 2 U i i dw ∧ dw. (w) p(ζ) (ϕx (ζ + hw) − ψy (ζ + hw)) dζ ∧ dζ = 2 2 |w|≤1 U Since (5.2.19) holds for all f with compact support in U , it holds also for f (z) := f (z + hw) if h is so small that the support of f is still contained in U . Then ϕ(z + hw) = f x (z), ψ(z + hw) = f y (z), hence (5.2.20) yields 0= ph (z) (ϕx (z) + ψy (z)) U = ph (z) ∆f (z) U = ∆ph (z) · f (z) U

(since ph ∈ C ∞ ). Since this holds for all f ∈ C0∞ (U ), it follows that ph is harmonic. As in § 3.4 the regularity properties of the harmonic ph imply convergence to a smooth harmonic limit which then has to agree with the L2 -limit p of the ph . The same argument applied to α (which is also in H) shows that q is also harmonic. Hence α is in particular of class C 1 , hence closed and co-closed by Lemma 5.2.4, hence harmonic. (Of course one could also conclude the harmonicity of α = pdx + qdy directly from that of p and q.)

Theorem 5.2.2 Let Σ be a Riemann surface. Then, for every closed (dif ∈ A21 (Σ) with ferentiable) α ∈ A21 (Σ), there exists a harmonic α α

= α (5.2.23) γ

γ

for all closed curves γ on Σ (i.e. α

is cohomologous to α). Proof. Since α ∈ A21 (Σ) is closed, we have α ∈ B ⊥ = B ⊕ H by (5.2.15) and (5.2.18), hence

, α = α + α

α ∈ B, α

∈ H.

are. If α = lim dfn in Observe that α ∈ B is diﬀerentiable since α and α 2 A1 , then, for any closed curve γ, α = ηγ ∧ α = lim ηγ ∧ dfn γ Σ Σ = lim dfn = 0, γ

proving (5.2.23).

202

5 Geometric Structures on Riemann Surfaces

Corollary 5.2.2 Let Σ be a compact Riemann surface of genus p. Then H = H 1 (Σ, C) = C2p . Thus every cohomology class is represented by a unique harmonic form. Proof. Since Σ is compact, every diﬀerentiable 1-form α is square-integrable. If α is closed, Theorem 5.2.2 yields a harmonic α

with the same periods, i.e. in the same cohomology class, as α (cf.Theorem 5.1.1). Since Σ is compact, α

is uniquely determined: on a compact Riemann surface, every harmonic function is constant (Lemma 2.2.1), hence every exact harmonic 1-form vanishes identically.

Corollary 5.2.2 is a special case of a theorem of Hodge, which states that an analogous assertion is true for any cohomology class on any compact oriented Riemannian manifold. We conclude this section by observing that we could also have obtained a harmonic form in a given cohomology class by the Dirichlet principle of minimizing (α, α) over the class. Namely, if α is minimal, then d (α + tdϕ, α + tdϕ) =0 dt t=0 for all ϕ ∈ C0∞ (Σ), hence 0 = α ∧ dϕ + dϕ ∧ α = 2 (α, dϕ), so that α is a weak solution of d α = 0. Regularity theory now implies as in the proof of Theorem 5.2.1 that α is diﬀerentiable, since we also have dα = 0. Conversely, if d α = 0, then (α + dϕ, α + dϕ) = (α, α) + (dϕ, dϕ) + 2 (α, dϕ) = (α, α) + (dϕ, dϕ) + 2 (d α, ϕ) = (α, α) + (dϕ, dϕ) ≥ (α, α), so that α is minimal.

Exercises for § 5.2 1)

Let S be a Riemann surface with boundary. What boundary conditions need one impose on α1 , α2 for (dα1 , α2 ) = (α1 , d α2 )

2)

to hold? Determine the harmonic and holomorphic 1-forms on S 2 and on a torus.

5.3 The Periods of Holomorphic and Meromorphic Diﬀerential Forms

203

5.3 The Periods of Holomorphic and Meromorphic Diﬀerential Forms We shall denote by H 0 (Σ, Ω 1 ) the space of holomorphic 1-forms on our compact Riemann surface Σ, and set h0 (Σ, Ω 1 ) := dimC H 0 (Σ, Ω 1 ). (We shall not explain here the motivation for this notation, which comes from algebraic geometry.) It follows from Lemma 5.2.3 and Corollary 5.2.2 that h0 (Σ, Ω 1 ) = p

(5.3.1)

where p is as usual the genus of Σ. Let α1 , . . . , αp be a basis of H 0 (Σ, Ω 1 ), and a1 , b1 , . . . , ap , bp a canonical homology basis for Σ. Then the period matrix of Σ is deﬁned as ⎞ ⎛ α · · · bp α1 a1 1 ⎜ .. ⎟. π := ⎝ ... ⎠ . α · · · bp αp a1 p The column vectors of π, α1 , . . . , αp Pi := ai

ai

Pi+p :=

α1 , . . . , bi

αp

i = 1, . . . , p,

bi

are called the periods of Σ. By Theorem 5.2.2 and Lemma 5.2.3, these vectors are linearly independent over R. Hence P1 , . . . , P2p generate a lattice Λ := {n1 P1 + · · · + n2p P2p , nj ∈ Z} in Cp . Deﬁnition 5.3.1 The Jacobian variety J(Σ) of Σ is the complex torus Cp /Λ (J(Σ) is got from Cp by identifying vectors which diﬀer only by elements of Λ). If we choose a point z0 in Σ, then we get a well-deﬁned map j : Σ → J(Σ) by setting

z

j(z) := z0

z

α1 , . . . ,

αp

mod Λ.

z0

Here j(z) is independent of the choice of the path from z0 to z, since a diﬀerent choice changes the vector of integrals only by an element of Λ.

204

5 Geometric Structures on Riemann Surfaces

It is necessary to consider the more general notion of meromorphic 1-forms, i.e. objects which, in local coordinates, have the form η(z) = f (z) dz with meromorphic f . If z0 corresponds in the local coordinate to z = 0, we can consider the Laurent expansion f (z) =

∞

an z n

n=n0

of f (z); a−1 is called the residue of η at z0 : Resz0 η := a−1 .

(5.3.2)

This number is independent of the choice of the local coordinate at z0 ∈ Σ, since 1 η(z) (5.3.3) Resz0 η = 2πi γ for any γ which is the boundary of a disc B containing z0 in its interior, with η holomorphic on B\{z0 }. The residue of η can thus be non-zero at the most at the singularities of η. Lemma 5.3.1 Let η be a meromorphic 1-form on the compact Riemann surface Σ. Let z1 , . . . , zm be the singularities of η. Then m

Reszj η = 0.

(5.3.4)

j=1

that B j \{zj } contains no Proof. Let Bj be a small disc around zj such m singularity of η. Then η is holomorphic on Σ\ j=1 Bj , hence closed (cf. Lemmas 5.2.2 and 5.2.3). Therefore Stokes’ theorem gives

0= Σ\

dη = − Bj

∂(

η=− Bj )

m 1 Reszj η. 2πi j=1

Corollary 5.3.1 A meromorphic function f on Σ has the same number (counted with multiplicity) of zeroes and poles. Proof.

Apply Lemma 5.3.1 to η =

df f .

In classical terminology, a diﬀerential of the ﬁrst kind on Σ is a holomorphic 1-form, a diﬀerential of the second kind is a meromorphic 1-form all of whose residues vanish, and a diﬀerential of the third kind is a meromorphic 1-form whose poles are all simple.

5.3 The Periods of Holomorphic and Meromorphic Diﬀerential Forms

205

Let now α be a holomorphic 1-form, and η a meromorphic 1-form, on our compact Riemann surface Σ of genus p. Let π1 , . . . , π2p and 1 , . . . , 2p denote respectively the periods of α and η with respect to a canonical basis a1 , . . . , bp of H1 (Σ, Z). Here it is understood that Σ has been represented as in Theorem 2.4.2 by a fundamental polygon F in H (if p = 1, one takes a similar fundamental polygon in C; if p = 0, there are no holomorphic forms on Σ except 0), where δF has the form −1 −1 a1 b1 a−1 1 b1 a2 · · · bp .

And F is to be so chosen that η has no poles on δF . Since F is simply connected, and α is holomorphic, we can deﬁne z f (z) := α z0

to obtain a holomorphic function f on F with df = α. (Here z0 ∈ F is an arbitrarily chosen point.) are equivalent points in F . Then Suppose now that z ∈ ai and z ∈ a−1 i z pi z α= α+ α+ α f (z ) − f (z) = z

z

bi

pi

where pi and pi are the initial and end points of bi respectively.

Fig. 5.3.1.

Since pi and pi are also equivalent, the ﬁrst and third integrals above cancel, and we get α = πp+i . (5.3.5) f (z ) − f (z) = bi

Similarly, for equivalent points z ∈ bi , z ∈ b−1 i , we will have f (z ) − f (z) = −πi .

(5.3.6)

206

5 Geometric Structures on Riemann Surfaces

Since η has the same value at equivalent points, is follows that f ·η+ f · η = −πp+1 η = −πp+i i , a−1 i

ai

and similarly

(5.3.7)

ai

f ·η+

bi

b−1 i

f · η = πi p+1

(5.3.8)

(to get the correct signs in the above formulas, one must keep in mind that correspond to opposite orientations in Σ). It follows from (5.3.7) ai and a−1 i and (5.3.8) that p f ·η = (πi p+i − πp+i i ) . (5.3.9) ∂F

i=1

But we also have

f · η = 2πi

Res(f · η).

(5.3.10)

∂F

We shall now specialise the above results to the case of an η of the second or third kind. If η is of the second kind, so that all its residues vanish, we set, in a neighborhood of a pole zν of η, (5.3.11) η(z) = aν−m z −m + · · · + aν0 + aν1 z + · · · dz, and α(z) = (bν0 + bν1 z + · · · ) dz. We have

hence

aν−1

(5.3.12)

= 0 for all poles zν of η by assumption, and zν 1 f (zν ) = α = bν0 zν + bν1 zν2 + · · · , 2 z0

Reszν (f · η) =

m

1 aν bν k − 1 −k k−2

.

(5.3.13)

If η is of the third kind, so that all its poles are simple, then zν Reszν (f · η) = Reszν η · α.

(5.3.14)

ν

ν

ν

k=2

ν

z0

We have thus proved the following reciprocity laws: Theorem 5.3.1 Let Σ be a compact Riemann surface of genus p, α a holomorphic one-form and η a meromorphic one-form on Σ. Let π1 , . . . , π2p and 1 , . . . , 2p be the periods of α and η respectively with respect to a canonical homology basis of Σ. Then:

5.3 The Periods of Holomorphic and Meromorphic Diﬀerential Forms

(i)

207

if η is of the second kind (so that all its residues vanish), we have, with the local representations (5.3.11) and (5.3.12) at the poles zν of η m p 1 ν ν a b ; (5.3.15) (πi p+i − πp+i i ) = 2πi k − 1 −k k−2 ν i=1 k=2

(ii) if η is of the third kind, so that all its poles are simple, we have p

(πi p+i − πp+i i ) = 2πi

ν

i=1

zν

Reszν η ·

α;

(5.3.16)

z0

here, z0 is an arbitrarily ﬁxed point of the fundamental polygon F , and the integrals are along curves inside F . Proof.

Cf. (5.3.9), (5.3.10), (5.3.13) and (5.3.14).

We now consider the case when the η above is also a holomorphic form zα , with periods π1 , . . . , π2p . Then the above procedure yields (with f (z) = z0 α as before) p πi π p+i − πp+i π i . (5.3.17) f α = ∂F

i=1

Hence Stokes’ theorem, and the fact that d(f α ) = df ∧ α = α ∧ α , yield

α ∧ α =

F

p

πi π p+i − πp+1 π i .

(5.3.18)

i=1

In particular, if α = α ≡ 0, then p 0
(5.3.19)

i=1

Thus, for α ≡ 0, the ﬁrst p periods π1 , . . . , πp cannot all vanish. It follows that the ﬁrst p columns of the period matrix π deﬁned above are linearly independent over C. We can therefore ﬁnd a basis of H 0 (Σ, Ω 1 ), which we shall still denote by α1 , . . . , αp , such that αj = δij , 1 ≤ i, j ≤ p. (5.3.20) ai

Thus, the period matrix is now of the form π = (Ip , Z), where Ip is the p × p identity matrix.

(5.3.21)

208

5 Geometric Structures on Riemann Surfaces

We can analyse Z by means of the reciprocity laws proved earlier. Namely, , (5.3.15) or (5.3.16) with η = α a holomorphic form with periods π1 , . . . , π2p yields p πi πp+i (5.3.22) − πp+i πi = 0. i=1

Thus, if α = αi and α = αj are elements of a normalised basis, then αj − αi = 0. (5.3.23) bi

bj

Hence the matrix Z is symmetric. Further, by (5.3.18), αi ∧ λαj (αi , αj ) = αi ∧ λ∗αj = i Σ =i λαj − i αi = 2 " αj bi

bj

(5.3.24)

bi

(using (5.3.23)). Hence "Z is positive deﬁnite. We collect the above results, also known as Riemann’s Bilinear Relations, in the following theorem. Theorem 5.3.2 We can ﬁnd a basis for H 0 (Σ, Ω 1 ), the space of holomorphic 1-forms on Σ (called a normalised basis), with respect to which the period matrix of Σ has the form π = (Ip , Z),

Z = Z t,

"Z > 0.

(5.3.25)

Exercises for § 5.3 1)

Write down the map j : Σ → J(Σ) explicitely in case Σ is a torus.

5.4 Divisors. The Riemann-Roch Theorem Deﬁnition 5.4.1 Let Σ be a Riemann surface. A divisor on Σ is a locally ﬁnite formal linear combination (5.4.1) D= s ν zν with sν ∈ Z and zν ∈ Σ.

5.4 Divisors. The Riemann-Roch Theorem

209

If Σ is compact (and we shall be exclusively interested in the compact case), the sum (5.4.1), being locally ﬁnite, has in fact to be ﬁnite. The set of divisors on Σ forms an additive abelian group, denoted by Div(Σ). (Occassionally, Div(Σ) is also written multiplicatively; both conventions have their advantages and disadvantages.) The divisor D is said to be eﬀective if sν ≥ 0 for all ν. We write

D ≥ D

if D − D is eﬀective. Thus D ≥ 0 means that D is eﬀective. If g ≡ 0 is a meromorphic function on Σ, and z ∈ Σ, then ordz g = k (> 0) if g has a zero of order k at z, and ordz g = −k (< 0) if g has a pole of order k at z. Otherwise ordz g = 0. We deﬁne the divisor of the meromorphic function g (≡ 0) by (5.4.2) (g) := (ordzν g) zν , the sum extending over all poles and zeros of g. If η ≡ 0 is a meromorphic diﬀerential, we can write η = f dz locally and deﬁne ordz η as ordz f . In this way, we can again associate to η (≡ 0) the divisor (5.4.3) (η) := (ordzν η) zν . Deﬁnition 5.4.2 A canonical divisor, always to be denoted by K, is the divisor (η) of a meromorphic 1-form η ≡ 0 on Σ. Deﬁnition 5.4.3 A meromorphic function g ≡ 0 is said to be a multiple of the divisor D if D + (g) ≥ 0. (5.4.4) A divisor D is called a principal divisor if it is the divisor (g) of a meromorphic function g ≡ 0: D = (g). (5.4.5) Two divisors D1 and D2 are said to be linearly equivalent if their diﬀerence is a principal divisor: D1 − D2 = (g)

(g ≡ 0).

(5.4.6)

We also deﬁne: L(D) := {g meromorphic function on Σ : g ≡ 0 or D + (g) ≥ 0}, (this is a complex vector space) 0 h (D) := dimC L(D), |D| := {D ∈ Div(Σ) : D ≥ 0, D linearly equivalent to D}.

210

5 Geometric Structures on Riemann Surfaces

Some remarks regarding the above deﬁnitions: g ≡ 0 is holomorphic if and only if (g) ≥ 0.

(5.4.7)

Any two canonical divisors are linearly equivalent: if K = (η) and K = (η ) are the divisors of the meromorphic forms η, η , then η/η =: g is a meromorphic function, and K − K = (g). Finally, observe that, if Σ is compact, then h0 (D) = dimC |D| + 1

(5.4.8)

in the sense that |D| can be identiﬁed with the projective space of the h0 (D)dimensional vector space L(D). This is because, if D is linearly equivalent to D, then the meromorphic function g such that D = D + (g) is unique up to a multiplicative constant (= 0), since the quotient of two such functions would be a (nowhere-vanishing) holomorphic function on Σ, hence a (non-zero) constant. Deﬁnition 5.4.4 Let Σ be a compact Riemann surface, and D ∈ Div(Σ): D= sν zν . Then the degree of D is deﬁned as deg D :=

sν .

(5.4.9)

Clearly, deg : Div(Σ) → Z is a homomorphism of groups. By Corollary 5.3.1, we have Lemma 5.4.1 For a meromorphic function g ≡ 0 on a compact Riemann surface Σ, deg(g) = 0. (5.4.10)

In turn, this implies: Lemma 5.4.2 Suppose again that Σ is compact. Then, for D ∈ Div(Σ) with deg D < 0, we have h0 (D) = 0.

5.4 Divisors. The Riemann-Roch Theorem

Proof.

211

For an f ≡ 0 in L(D), we would have (f ) ≥ −D,

hence deg(f ) ≥ − deg D > 0,

which is impossible by Lemma 5.4.1. The central theorem on divisors is the theorem of Riemann-Roch:

Theorem 5.4.1 Let Σ be a compact Riemann surface of genus p, and D a divisor of Σ. Then h0 (D) = deg D − p + 1 + h0 (K − D).

(5.4.11)

The Riemann-Roch theorem says that the number of linearly independent meromorphic functions g on Σ satisfying (g) ≥ −D equals the degree of D − (genus of Σ) + 1 + the number of linearly independent meromorphic 1-forms η on Σ satisfying (η) ≥ D). We shall see several applications of the Riemann-Roch theorem in the sequel. Foremost, it should be seen as an existence theorem for meromorphic functions with poles at most at those zν where sν > 0 (D = sν zν ). In particular, if deg D ≥ p, the theorem says that one can always ﬁnd such a meromorphic function. The proof of Theorem 5.4.1 depends decisively on the following Lemma 5.4.3 Let z1 , . . . , zn ∈ Σ; suppose a local chart has been chosen around each zν . Then, for any t1 , . . . , tn ∈ C, there exists a unique meromorphic 1-form ηt on Σ with the following properties: n {zν }; (i) ηt is holomorphic on Σ\ ν=1

(ii) for each ν, ηt (z) = {tν z −2 + terms of order ≥ 0} dz near zν , where z is the chosen local parameter at zν with zν = 0; (iii) ηt = 0, i = 1, . . . , p ai

(a1 , . . . , ap , b1 , . . . , bp being as usual a canonical homology basis for Σ). Proof. We assume without essential loss of generality that the chosen coordinate chart contains the disk D = {z : |z| < 1} with zν corresponding to 0 ∈ D.

212

5 Geometric Structures on Riemann Surfaces

ϑ := tν

1 z2

then is holomorphic in D\{0}. We have 1 ϑ = d(−tν ), z ϑ is thus exact in {z : |z| > 12 }. We wish to construct a diﬀerential ω which is harmonic in Σ\{zν } and for which ω − ϑ is harmonic in D. We choose a cut-oﬀ function η ∈ C0∞ (D, R) with for |z| ≤ for |z| ≥

η(z) = 1 0 ≤ η(z) ≤ 1 and put

d −ηtν z1 α(z) := 0

1 2 1 2

for z ∈ D for z ∈ Σ\D.

Then α(z) = ϑ(z) for |z| ≤ 12 , and since ϑ is meromorphic in that region, α(z) = −i α(z)

for |z| ≤

1 2

as in Lemma 5.2.3, i.e. α(z) − i

α(z) ≡ 0

for |z| ≤ 12 .

Thus, this expression is everywhere smooth and, in particular, square integrable. We now apply the orthogonal decomposition (5.2.18): α − i α = ω0 + dg + df with ω0 ∈ H, df ∈ B , dg ∈ B. Since the left hand is C ∞ , f and g are smooth as well. We put µ := α − dg = i α + ω0 + df. Then µ ∈ C ∞ (Σ\{zν }). Moreover dµ = dα − ddg = 0, since α is closed in Σ\{zν }, and d µ = −idα + d ω0 − ddf = 0, since ω0 is harmonic (Theorem 5.2.1). For |z| ≤ 12 , i α(z) = α(z) = ϑ(z), hence in that region µ − ϑ = −dg = ω0 + df is smooth. βν :=

1 (µ + µ) 2

5.4 Divisors. The Riemann-Roch Theorem

then is a real valued harmonic diﬀerential with singularity

213

(tν z12 ) at zν .

βν + i βν then is a meromorphic diﬀerential with singularity 1 tν 2 z in our coordinate chart at zν = 0. n (βν + i βν ) ν=1

then satisﬁes the ﬁrst two conditions of the lemma. Clearly two such forms diﬀer only by a holomorphic form, and it follows by Theorem 5.3.2 that the periods along a1 , . . . , ap can be made to vanish; and conversely the form is then uniquely determined.

Remark. below.

The same reasoning will be used for the proof of Lemma 5.9.1

Proof of Theorem 5.4.1. We ﬁrst prove the theorem for an eﬀective divisor D. For simplicity of notation, we assume that n zν (zν distinct ). D= ν=1

The general case requires no essential additional work, but the notation becomes complicated. Let then f ∈ L(D), so that (f ) + D ≥ 0. Then df is a meromorphic 1-form, holomorphic on Σ\ {zν }, having no periods and residues, and having at the worst poles of order two at the zν . Conversely, if η is a meromorphic form with these properties, then z η (z0 ∈ Σ ﬁxed arbitrarily ) f (z) := z0

is well-deﬁned, and f ∈ L(D). Clearly df = df if and only if f and f diﬀer by an additive constant. We are thus led to consider the vector space V := {meromorphic 1-forms on Σ withno periods and residues, holomorphic on Σ\ {zν }, with poles of order ≤ 2 at the zν }.

214

5 Geometric Structures on Riemann Surfaces

It is clear from the above considerations that h0 (D) = dimC V + 1.

(5.4.12)

To compute dimC V , we apply Lemma 5.4.3 and construct for every t = (t1 , . . . , tn ) the 1-form ηt of that lemma, and consider the linear map : Cn → Cp

deﬁned by

ηt .

ηt , . . . ,

(t) := b1

bp

Then clearly V = ker . If now α1 , . . . , αp is a normalised basis of H 0 (Σ, Ω 1 ), so that have, by (5.3.15) (note that ρi = ai ηt = 0)

ηt = 2πi bj

tν

α

ν

j

dz

(zν ),

(5.4.13)

α = δij , we ai j

(5.4.14)

where z is again the local parameter at zν vanishing at zν and where the α notation dzj (zν ) means the following: If αj = bj (z)dz in our local coordinate α z, then dzj (zν ) = bj (zν ). Thus is deﬁned by the matrix α ⎛ α1 ⎞ 1 dz (z1 ), . . . , dz (zn ) ⎜ ⎟ .. .. 2πi ⎝ ⎠. αp . αp . dz (z1 ), . . . , dz (zn ) The number of independent linear relations between the rows of this matrix is precisely the dimension of the space of holomorphic 1-forms which vanish at all the zν . But this dimension is just h0 (K − D): if K is represented by a meromorphic form η, then g ≡ 0 ∈ H 0 (K − D) if and only if (g) + (η) − D ≥ 0 i.e. (gη) ≥ D or, in other words, gη is holomorphic and vanishes at all the zν . Thus, we have by (5.4.12) and (5.4.13) h0 (D) = dim(ker ) + 1 = n − rank + 1 = n − p + h0 (K − D) + 1, which is (5.4.11) for the eﬀective divisor D, since n = deg D.

(5.4.15)

5.4 Divisors. The Riemann-Roch Theorem

215

Of course we have also proved (5.4.11) more generally for all divisors linearly equivalent to an eﬀective divisor, since h0 (D), h0 (K − D) and deg D are not aﬀected if D is replaced by a linearly equivalent divisor. To treat the general case, we need Lemma 5.4.4 For a canonical divisor K on a compact Riemann surface of genus p, we have deg K = 2p − 2. Proof. As remarked above, linearly equivalent divisors have the same degree, and all canonical divisors are linearly equivalent. Hence it is enough to prove the assertion of the lemma for any one canonical divisor. We choose a non-constant meromorphic function g on Σ with only simple poles (such a g can be obtained by integrating an η (≡ 0) ∈ V , the vector space introduced above; V = (0) for n > p, by (5.4.13)). We shall prove the lemma for K = (dg). If z ∈ Σ is not a pole of g, it is clear that ordz dg = vg (z)

(5.4.16)

where vg (z) is the order of ramiﬁcation of g at z (cf. Deﬁnition 2.5.2). If however g(z) = ∞, then ordz dg = ordz g − 1 = −2,

(5.4.17)

since g has only simple poles. It follows from (5.4.16) and (5.4.17) that vg (z) − 2n, (5.4.18) deg(dg) = z∈Σ

where n is the number of poles of g. On the other hand, we can think of g as a holomorphic map g : Σ → S2 of degree n and apply the Riemann-Hurwitz formula (Theorem 2.5.2) to get vg (z). (5.4.19) 2 − 2p = 2n − z∈Σ

Comparing (5.4.18) and (5.4.19), we obtain the assertion of the lemma.

We now continue with the proof of Theorem 5.4.1. If D ∈ Div(Σ) is such that K − D is linearly equivalent to an eﬀective divisor, then using (5.4.15) with D replaced by (K − D) and Lemma 5.4.4, we get h0 (K − D) = (2p − 2 − n) − p + 1 + h0 (D),

216

5 Geometric Structures on Riemann Surfaces

hence again h0 (D) = n − p + 1 + h0 (K − D). Thus the only case left to handle is when neither D nor K − D is linearly equivalent to an eﬀective divisor, i.e. when h0 (D) = 0 = h0 (K −D). We must then prove that deg D = p − 1. We write D = D1 − D2 with D1 , D2 eﬀective and having no point in common. Then deg D = deg D1 − deg D2 . We may apply (5.4.11) to D1 ; we get h0 (D1 ) ≥ deg D1 − p + 1 = deg D + deg D2 − p + 1. If now deg D ≥ p, then h0 (D1 ) ≥ deg D2 + 1,

(5.4.20)

and there will exist a g ≡ 0 in L(D1 ) vanishing at all points of D2 , since vanishing at points of D2 imposes at the most deg D2 conditions on an element of L(D1 ). For such a g, we would have (g) + D = (g) + D1 − D2 ≥ D1 ≥ 0, i.e. g ∈ L(D). This would mean that h0 (D) > 0, in contradiction to our assumption. It follows that we must have deg D ≤ p − 1. But the same argument applies to K − D also, so we must also have deg(K − D) ≤ p − 1, hence deg D ≥ p − 1, since deg K = 2p − 2 (Lemma 5.4.4). Hence deg D = p − 1 as required.

The Riemann-Roch Theorem allows us to provide the uniformization of compact Riemann surfaces of genus 0, thereby completing the proof of the Uniformization Theorem 4.4.1. Corollary 5.4.1 Let Σ be a compact Riemann surface of genus 0. Then Σ is conformally equivalent to the unit sphere S 2 .

5.4 Divisors. The Riemann-Roch Theorem

Proof.

217

We need to construct a holomorphic diﬀeomorphism h : Σ → S2.

For that purpose, we shall use the Riemann-Roch theorem to construct a meromorphic function g on Σ with a single and simple pole and then interpret g as such a holomorphic diﬀeomorphism. So, we choose any z0 ∈ Σ and consider the divisor D = z0 . Since p = 0, by Lemma 5.4.4, deg K = −2, and so in particular deg (K − D) = −3 < 0, and thus, by Lemma 5.4.2, h0 (K − D) = 0. The Riemann-Roch Theorem 5.4.1 therefore yields h0 (D) = 2. Therefore, we can ﬁnd a nonconstant meromorphic function g with D + (g) ≥ 0, i.e. with at most a simple pole at z0 , and as g is nonconstant, it must have a pole somewhere, and so it does have a pole at z0 . As explained in § 2.1, such a meromorphic function can be considered as a holomorphic map h : Σ → S2. Since we have a single simple pole at z0 , the mapping degree of h is 1 (see Def. 2.5.3). By the Riemann-Hurwitz Theorem 2.5.2, since the genus of Σ and the genus of S 2 are 0, h has no branch points, and being of degree 1, it therefore is a diﬀeomorphism.

We now deduce another consequence of the Riemann-Roch Theorem that allows us to complete a line of reasoning of Chapter 4. Corollary 5.4.2 Let Σ be a compact Riemann surface of genus p, and let Q(Σ) be the vector space of holomorphic quadratic diﬀerentials on Σ. Then: if p = 0, dimC Q(Σ) = 0 if p = 1, dimC Q(Σ) = 1 dimC Q(Σ) = 3p − 3 if p ≥ 2.

(5.4.21) (5.4.22) (5.4.23)

218

5 Geometric Structures on Riemann Surfaces

Proof. We ﬁrst observe that Q(Σ) can be identiﬁed with L(2K). Namely, if f dz is a 1-form with (f dz) = K, and if g ∈ L(2K), so that

(g) + 2K ≥ 0,

then gf 2 dz 2 ∈ Q(Σ). Conversely, if ϕdz 2 ∈ Q(Σ), then g = Now, by Lemma 5.4.4, deg(2K) = 4p − 4.

ϕ f2

∈ L(2K).

Hence, if p = 0, we have by Lemma 5.4.2 0 = h0 (2K) = dimC L(2K) = dimC Q(Σ)

(5.4.24)

which is (5.4.21). If p = 1, then, by Lemma 5.4.4 deg K = 0 = deg 2K.

(5.4.25)

Also, since p = dimC H 0 (Σ, Ω 1 ) = 1, there exists a holomorphic 1-form f dz ≡ 0 on Σ. Since deg(f dz) = deg K = 0, f dz cannot have any zeros. Hence f 2 dz 2 ∈ Q(Σ) is nowhere zero on Σ. Hence, for any ϕ ∈ Q(Σ), f 2ϕdz2 is a holomorphic function on Σ, hence a constant. It follows that dimC Q(Σ) = 1, i.e. (5.4.22) is proved. Finally, let p ≥ 2. Then deg(−K) = 2 − 2p < 0, hence h0 (−K) = 0 by Lemma 5.4.2. Now the Riemann-Roch theorem ((5.4.11)) yields h0 (2K) = 4p − 4 − p + 1 = 3p − 3. Since we have already identiﬁed L(2K) and Q(Σ), this proves (5.4.23).

Corollary 5.4.3 If p ≥ 2, then the Teichm¨ uller space Tp is diﬀeomorphic to R6p−6 . Proof.

This follows from Theorem 4.2.3 and Corollary 5.4.2.

Remark. The cases p = 0 and p = 1 of Corollary 5.4.2 can also be deduced elementarily from Liouville’s theorem, as we know that they correspond respectively to S 2 and the complex tori.

5.4 Divisors. The Riemann-Roch Theorem

219

Consider for instance the case p = 0, i.e. Σ = S 2 . Let ω ∈ Q(Σ). Then, via stereographic projection, ω gives a quadratic diﬀerential f dz 2 on C. Under the coordinate change 1 ω := , z we must have 2

f (z) dz 2 = f (z(ω)) (zω ) dω 2 1 = f (z(ω)) 4 dω 2 . ω Since ω → 0 as z → ∞, and f (z(ω))/ω 4 must remain bounded as ω → 0, f (z) must tend to zero as z → ∞. Since f (z) is an entire function, we conclude by Liouville’s theorem that f ≡ 0, hence ω ≡ 0. If p = 1, we represent Σ as C/Λ, then a holomorphic quadratic diﬀerential on Σ can be lifted to one on C. For such a lifted quadratic diﬀerential f (z)dz 2 , f (z) is obviously a bounded entire function, hence constant. Corollary 5.4.4 If Σ is a compact Riemann surface of genus ≥ 1, then there is no z ∈ Σ at which all holomorphic 1-forms vanish. Proof. Suppose all holomorphic forms on Σ vanish at z ∈ Σ. This means that L(K − z) = L(K), hence the Riemann-Roch theorem gives h0 (z) = 1 − p + 1 + p = 2, so that there exists a non-constant meromorphic function g with (g) + z ≥ 0. (For any eﬀective divisor D, the constants are always in L(D), so that h0 (D) is always ≥ 1 for an eﬀective D.) But then g has only a single simple pole at z. Therefore, g has degree one as a map Σ → S 2 . In particular, g has no branch points. However, since p ≥ 1, this contradicts the Riemann-Hurwitz formula (Theorem 2.5.2).

Exercises for § 5.4 1)

2)

Show that two divisors D1 , D2 on S 2 are linearly equivalent if and only if deg D1 = deg D2 (Hint: Prove and use that for any p1 , p2 ∈ S 2 , there exists a meromorphic function g on S 2 with (g) = p1 − p2 .) Deﬁne a holomorphic n-diﬀerential to be an object of the form f (z) dz n , with holomorphic f . Determine the dimension of the space of holomorphic n-diﬀerentials on a compact Riemann surface of genus p.

220

5 Geometric Structures on Riemann Surfaces

3)

Prove the Brill-Noether reciprocity theorem: If g is a meromorphic 1form on the compact Riemann surface Σ, with divisor (g), and if D is any divisor on Σ, then 2 h0 (K − D) − h0 (K − (g) + D) = deg ((g) − D) − deg D.

4)

Let Σ be a compact Riemann surface of genus p, and let n > 2p − 2. Show that there exists a 2n + 1 − p (complex) parameter family of conformal maps of Σ onto n-sheeted covers of S 2 . (Of course, one has to vary the position of the poles!) Let Σ be a Riemann surface with boundary ∂Σ. Let φ dz 2 be a holomorphic quadratic diﬀerential which is real on ∂Σ. (This means that if we have a local coordinate z = x + iy, y = 0 corresponding to ∂Σ, and if φ dz 2 = (φ1 + iφ2 ) (dx + idy)2 with real φ1 , φ2 in this coordinate, then φ2 = 0 for y = 0). Compute the dimension of the (real) vector space of all holomorphic quadratic diﬀerentials which are real on ∂Σ. Interpret the Riemann-Hurwitz formula (Thm. 2.5.2) in terms of the constructions of this section (Hint: If f : Σ1 → Σ2 is a holomorphic map between compact Riemann surface, and if α is a holomorphic 1form on Σ2 , then f ∗ α is a holomorphic 1-form on Σ1 . Relate the divisor (f ∗ α) and the divisor f ∗ (α), the preimage of the divisor of α).

∗

5)

6)

5.5 Holomorphic 1-Forms and Metrics on Compact Riemann Surfaces Theorem 5.5.1 Let Σ be a compact Riemann surface of genus p ≥ 1, and let α1 , . . . , αp be a basis of the space of holomorphic 1-forms on Σ. Then p

αi (z) αi (z)

i=1

deﬁnes a metric on Σ with nonpositive curvature, the so-called Bergmanmetric. If p ≥ 2, then the curvature vanishes at most in a ﬁnite number of points. p Proof. i=1 αi (z)αi (z) transforms as dzdz and is everywhere positive definite by Corollary 5.4.4, hence deﬁnes a metric. In a local coordinate, we write αi (z) = fi (z)dz with holomorphic fi (i = 1, . . . , p). The metric then is p i=1

fi (z)f i (z) dz dz =: (f, f ) dz 2

5.5 Holomorphic 1-Forms and Metrics on Compact Riemann Surfaces

221

with f = (f1 , . . . , fp ). Using that the fi are holomorphic, one computes for the curvature 2 ∂2 log(f, f ) (f, f ) ∂z∂z 2 =− ((f, f ) · (fz , fz ) − (fz , f ) · (f, fz )) (f, f )3 ≤ 0.

K=−

δf

p 1 K vanishes precisely where f and fz = ( δf δz , . . . , δz ) are linearly dependent. Since the 1-forms f1 dz, . . . , fp dz are linearly independent (and holomorphic), this can happen at most at a ﬁnite number of points for p ≥ 2.

In case p ≥ 2, we now want to modify the metric 2

λ dz dz :=

p

αi (z) αi (z)

i=1

in neighborhoods of the ﬁnitely many points z1 , . . . , zk ∈ Σ where the curvature K vanishes in such a way that the new metric has negative curvature everywhere. For this purpose, we choose disjoint coordinate neighborhoods Vj with zj ∈ Vj , j = 1, . . . , k, and for each Vj a local coordinate z with zj corresponding to z = 0 and {|z| < 1} ⊂ Vj . We then choose a real valued nonnegative C ∞ -function η(z) with η(z) ≡ 1

for |z| ≤

η(z) ≡ 0

for |z| ≥ 1

1 2

and put φ(z) := η(z)(1 + zz) and ﬁnally in Vj , for t > 0, λ2t (z) dz dz := λ2 (z) + tφ(z) dz dz. Outside the union of the Vj , we leave λ2 (z)dzdz unchanged. We put Vj := |z| < 12 ⊂ Vj . k If t is suﬃciently small, the new metric has negative curvature in Σ\ j=1 Vj , because the original metric had negative curvature there and the curvature depends continuously on t. Inside each Vj , we write again αi (z) = fi (z)dz, hence (5.5.1) λ2t (z) dz dz √√ √ √ = f1 (z)f 1 (z) + · · · + fp (z)f p (z) + t t + ( t z)( t z) dz dz =: (g, g) dz dz.

222

5 Geometric Structures on Riemann Surfaces

√ √ √ ∂fp 1 Since the vectors g = (f1 , . . . , fp , t, tz) and gz = ( ∂f ∂z , . . . , ∂z , 0, t) are everywhere linearly independent for t > 0, it follows from the consideration in the proof of Theorem 5.5.1, that λ2 (z)dzdz has negative curvature inside Vj for each t > 0. Thus, choosing t > 0 small enough, we obtain Theorem 5.5.2 Each compact Riemann surface of genus p ≥ 2 admits a metric with negative curvature.

Of course, each such Riemann surface even admits a metric with constant curvature −1 as a consequence of the uniformization theorem, but the point of the preceding construction is that it is completely elementary. Although we have used the Riemann-Roch theorem in the proof of Theorem 5.5.1, we do not need this p for the construction of a negatively curved metric. Namely, points where i=1 αi (z)αi (z) would vanish could also be handled by adding a term of the form t φ(z) as in the preceding proof.

5.6 Divisors and Line Bundles Let Σ be a compact Riemann surface. On Σ, we deﬁne the Zariski topology: Deﬁnition 5.6.1 The open sets of the Zariski topology consist of the empty set and all complements of divisors, i.e. sets of the form Σ\{w1 , . . . , wn }, where w1 , . . . , wn are points on Σ. (The divisor may be empty.) It is clear that the ﬁnite intersections and countable unions of (Zariski) open sets are again open. We point out that this topology does not satisfy the Hausdorﬀ property, i.e. diﬀerent points on Σ do not have disjoint neighborhoods. During this section, Σ will always be equipped with the Zariski topology. We shall use the following notation: M := {meromorphic functions on Σ} M∗ := M\{0} = {not identically vanishing meromorphic functions}, and for an open subset U of Σ M(U ) := {f |U : f ∈ M} , M∗ (U ) := {f |U : f ∈ M∗ } , O(U ) := {f ∈ M : f holomorphic on U }, O∗ (U ) := {f ∈ O(U ) : f (z) = 0 for all z ∈ U }. We have seen e.g. in the proof of the Riemann-Roch theorem that there exist nonconstant meromorphic functions on Σ. For each z ∈ Σ, we can also ﬁnd a nonconstant meromorphic function vanishing at z to ﬁrst order, as a consequence of Lemma 5.4.3 (see again the proof of the Riemann-Roch theorem).

5.6 Divisors and Line Bundles

Let now D=

n

sν zν

223

(sν ∈ Z, zν ∈ Σ)

ν=1

be a divisor on Σ. For each ν, we can ﬁnd some open set Uν , zν ∈ Uν and ﬁrst order at zν , but fν (z) = 0 for z ∈ Uν \{zν }. fν ∈ O(Uν), vanishing to & n n On V1 := ν=1 Uν , g1 := ν=1 fνsν then deﬁnes the divisor D. We can also ﬁnd other such sets V2 , V3 , . . . , Vm and functions g2 , g3 , . . . , gm deﬁning D on the corresponding sets, with the property that m

Vi = Σ.

i=1

Conversely, given a ﬁnite open covering {Vi }i=1,...,m of Σ and gi ∈ M∗ (Vi ), satisfying gi ∈ O∗ (Vi ∩ Vj ) for all i, j, (5.6.1) gj the zero and polar set of the collection {gi } is well deﬁned (i.e. on Vi ∩ Vj , gi and gj have the same zero and polar sets because of (5.6.1)). Consequently, such a collection {(Vi , gi )} deﬁnes a divisor D on Σ. The divisor is not changed if each g is multiplied by an arbitrary φi ∈ O∗ (Vi ). In this section, we shall always identify a divisor on Σ with such a collection {(Vi , gi ) : ggji ∈ O∗ (Vi ∩ Vj ) for all i, j}, where each gi is determined up to multiplication by some element of O∗ (Vi ). We shall now introduce a concept that identiﬁes linearly equivalent divisors, namely the concept of a line bundle on the Riemann surface Σ. Deﬁnition 5.6.2 A line bundle L on Σ is given by an open covering {Ui }i=1,...,m of Σ and transition functions gij ∈ O∗ (Ui ∩ Uj ) satisfying for all i, j gij · gji ≡ 1 on Ui ∩ Uj for all i, j, k. gij · gjk · gki ≡ 1 on Ui ∩ Uj ∩ Uk

(5.6.2) (5.6.3)

The geometric intuition behind this concept can be described as follows. One takes the union of Ui × C over all i and identiﬁes for z ∈ Ui ∩ Uj the ﬁbres {z} × C in Ui × C and Uj × C via multiplication by gij (z). In other words (z, w) ∈ Ui × C is identiﬁed with (z, gij (z)w) ∈ Uj × C. Thus, one thinks of a line bundle as a collection of complex lines indexed by the points in Σ and varying holomorphically over Σ. We shall not need this interpretation in the sequel, but it motivates Deﬁnition 5.6.3 Two line bundles L, L with transition functions gij and , resp., are called isomorphic if there exist functions φi ∈ O∗ (Ui ) for each gij i, with φi = gij on each Ui ∩ Uj . (5.6.4) gij φj

224

5 Geometric Structures on Riemann Surfaces

(We may assume that L and L are deﬁned through the same open covering {Ui }; namely if L is deﬁned through {Vj }, and L through {Vk }, then they can both be deﬁned through the covering consisting of all intersections Vj ∩ Vk .) In the sequel, we shall always identify isomorphic line bundles. We can equip the set of line bundles with an Abelian group structure: If L, L are line , resp., we let L ⊗ L−1 be the bundles with transition functions gij and gij −1 line bundle with transition functions gij gij . Of course, the neutral element is given by the trivial line bundle with transition functions gij ≡ 1. Deﬁnition 5.6.4 The Abelian group of line bundles on Σ is called the Picard group of Σ, Pic(Σ). Theorem 5.6.1 The Picard group Pic(Σ) is isomorphic to the group of divisors Div(Σ) modulo linear equivalence. Proof.

Let the divisor D be given by fi ∈ O∗ (Ui ∩ Uj ) . (Ui , fi ) : fj

We put gij :=

fi fj

on Ui ∩ Uj .

Then obviously gij ∈ O∗ (Ui ∩ Uj ), and (5.6.2) and (5.6.3) are satisﬁed. Thus, to D, we have associated a line bundle [D]. This is welldeﬁned. Namely, if D is described by some other local data {(Ui , fi )} (as remarked after Deﬁnition 5.6.3, we may assume that the underlying open coverings of Σ are the same), we get transition functions = gij

fi φi = gij fj φj

f

with φi = fii ∈ O∗ (Ui ), and we therefore get isomorphic line bundles. If D and D are divisors with deﬁning functions fi and gi , resp., then D − D is deﬁned by fi gi−1 , and hence [D − D ] = [D] ⊗ [D ]−1 . Therefore, we obtain a group homomorphism. If D = (g) for a nonvanishing meromorphic function g on Σ, then D is given by the datum {(Σ, g)}, and thus [D] is given by the transition function 1 for any open covering of Σ, hence trivial. As D → [D] is a group homomorphism, we conclude that if D and D are linearly equivalent, then [D] = [D ]. Let now L ∈ Pic(Σ) be given by transition functions gij ∈ O∗ (Ui ∩ Uj ). Then there exists some f1 ∈ M∗ (Ui ) with f1 |U1 ∩U2 = g12 . Having deﬁned g fi , we ﬁnd fi+1 ∈ M∗ (Ui+1 ) with fi+1 |Ui ∩Ui+1 = i+1,i fi . Since the gij satisfy

5.6 Divisors and Line Bundles

225

(5.6.2) and (5.6.3), the collection {(Ui , fi )} deﬁnes some divisor D with [D] = L, and D is determined up to linear equivalence. Finally, the line bundle L with transition functions gij is trivial (as an element of Pic(Σ)) if and only if there exist φi ∈ O∗ (Ui ) with gij =

φi φj

on all Ui ∩ Uj .

If D, given by {(Ui , fi )}, satisﬁes [D] = L, then φi fi = gij = fj φj

on Ui ∩ Uj ,

f

and hence φfii = φjj , so that we can deﬁne a global meromorphic g with D = (g) by requiring fi f= on each Ui . φi Therefore, if [D] is trivial, then D is linearly equivalent to 0. This concludes the proof.

Deﬁnition 5.6.5 Let L be a line bundle with transition functions gij . A meromorphic section h of L is given by a collection {hi ∈ M(Ui )} of meromorphic functions on Ui satisfying hi = gij hj

on Ui ∩ Uj .

(5.6.5)

If U is open, and if all hi are holomorphic on U ∩ Ui , the section is called holomorphic on U . We observe that the quotient h/h of two meromorphic sections is a meromorphic function on U . Likewise, if h and h are holomorphic and h has no zeroes on U , then h/h is a holomorphic function on U . In particular, if L admits a holomorphic section φ without zeroes, then L is a trivial line bundle: We have gij = φφji 1, and 1 is the transition function for the trivial bundle, compare (5.6.4). For a meromorphic section h of L, hhji ∈ O∗ (Ui ∩ Uj ) for all i and j, and thus for each z ∈ Σ if z ∈ Ui , ordz h := ordz hi , is well deﬁned. Therefore, a meromorphic section h of L deﬁnes a divisor (h) := (ordzν h)zν , where the summation is over all zeroes and poles of h. We observe that h is holomorphic if and only if (h) is an eﬀective divisor.

226

5 Geometric Structures on Riemann Surfaces

Theorem 5.6.2 Let D be a divisor on Σ. Then the line bundle [D] has a meromorphic section h with (h) = D. Conversely, for any meromorphic section h of a line bundle L, L = [(h)]. Thus, the meromorphic sections of [D] correspond to the divisors that are linearly equivalent to D. In particular, L is the line bundle associated with an eﬀective divisor if and only if it admits a global nonconstant holomorphic section. Thus, the holomorphic sections of [D] correspond to the eﬀective divisors linearly equivalent to D, that is, to the meromorphic functions g with D + (g) ≥ 0. Proof.

If D is deﬁned by fi ∗ ∈ O (Ui ∩ Uj ) , (Ui , fi ) : fj

then {fi } deﬁnes a meromorphic section f of the line bundle [D], recalling that [D] has transition functions gij = ffji . Obviously, (f ) = D. If, conversely, L is given by transition functions gij , and if {hi } deﬁnes a meromorphic section h of L, then L = [(h)], since hi = gij . hj The second-to-last claim was already observed before the statement of the theorem, and the last one then is a consequence of the rest of the theorem and the deﬁnition of linear equivalence of divisors.

We have thus established a correspondence between divisors and meromorphic sections of line bundles. In the above geometric interpretation of line bundles, a meromorphic section of L associates to each z ∈ Σ an element of {z}×(C∪{∞}), the closure of the ﬁbre over z. The transformation property (5.6.5) was required to make this compatible with the identiﬁcation of ﬁbres over Ui and Uj via the transition functions gij . We also remark that in this interpretation a trivial line bundle is considered as Σ × C, and it consequently has only constant holomorphic sections. This, however, can also be seen directly from the deﬁnitions. For a line bundle L, we deﬁne h0 (L) := {h holomorphic section of L}. A direct consequence of the preceding theorem then is Corollary 5.6.1 For a line bundle L = [D] h0 (L) = h0 (D).

5.6 Divisors and Line Bundles

227

Deﬁnition 5.6.6 Let L be a line bundle over Σ with transition functions gij . A Hermitian metric λ2 on L is a collection of positive smooth real valued functions λ2i on Ui with λ2j = λ2i gij λgij

on Ui ∩ Uj .

(5.6.6)

Deﬁnition 5.6.7 Let L be a line bundle on Σ with Hermitian metric λ2 . The ﬁrst Chern form of L w.r.t. λ2 is deﬁned as c1 (L, λ2 ) :=

1 ∂2 log λ2i dz ∧ dz 2πi ∂z∂z

on Ui .

(5.6.7)

Because of the transformation formula (5.6.6) and the fact that gij ∈ O∗ (Ui ∩ Uj ), c1 (L, λ2 ) is well deﬁned. Lemma 5.6.1 The cohomology class deﬁned by c1 (L, λ2 ) is independent of the choice of Hermitian metric on L. It is denoted by c1 (L) ∈ H 2 (Σ, C)

(5.6.8)

and called the ﬁrst Chern class of L. Proof.

If another metric µ2 is given by local functions µ2i , then σ :=

λ2 λ2 := i2 2 µ µi

on Ui

is a globally deﬁned positive function on Σ. Then

2

c1 L, λ

− c1 L, µ

2

1 ∂2 log σ dz ∧ dz = d = 2πi ∂z∂z

1 ∂ log σ dz 2πi ∂z

is exact.

Theorem 5.6.3 Let D be a divisor on Σ. Then the ﬁrst Chern class c1 ([D]) is Poincar´e dual to D in the sense that c1 ([D]) = deg D. (5.6.9) Σ

Proof. We ﬁrst observe that if L and L are line bundles with metrics λ2 2 and µ2 , resp., then µλ2 deﬁnes a metric on L ⊗ L−1 , and for the Chern forms we then have 2 −1 µ (5.6.10) c1 L ⊗ L , 2 = c1 L , µ2 − c1 L, λ2 . λ Since D → [D] is a group homomorphism (Theorem 5.6.1), it therefore sufﬁces to treat the case D = z1 ,

228

5 Geometric Structures on Riemann Surfaces

i.e. where D is given by a single point with multiplicity one. Let, then, h be a global holomorphic section of [D] = [z1 ] vanishing precisely at z1 (to ﬁrst order) (cf. Theorem 5.6.2). We let B(r) be a disk in a local coordinate chart with center z1 and radius r. Then, equipping [D] with λ2 , 2 c1 ([D], λ ) = lim c1 ([D], λ2 ) r→0

Σ

Σ\B(r)

1 r→0 2πi

∂2 log λ2 dz ∧ dz. ∂z∂z

= lim

Σ\B(r)

For a section s of [D], given by si on Ui , we put 2

|s| := λ2i si si

on Ui ,

λ2i representing λ2 on Ui . It follows from the transformation rules for λ2 and 2 s that |s| is well deﬁned, since λ2i si si = λ2j sj sj

on Ui ∩ Uj .

Then 1 2πi

Σ\B(r)

1 ∂2 log λ2 dz dz = ∂z∂z 2πi

Σ\B(r)

∂2 2 log |h| dz dz, ∂z∂z 2

∂ since h is holomorphic and nonzero on Σ\B(r). While ∂z∂z log λ2 is well 2 ∂ deﬁned on Σ, in general this is not the case for ∂z log λ2 . |h| , however, is globally deﬁned on Σ\B(r), and therefore, we can integrate by parts to obtain 1 ∂2 ∂ 1 2 2 log |h| dz dz = log |h| r dθ, 2πi Σ\B(r) ∂z∂z 4π ∂B(r) ∂r

using polar coordinates on B(r). Now (i) (ii)

2

|h| = λ2i hi λhi , limr→0

∂ ∂B(r) ∂r

(assuming B(r) ⊂ Ui , Ui open),

log λ2i r dθ = 0,

since λ2i is positive,

∂ (iii) limr→0 ∂B(r) ∂r log hi r dθ = limr→0 ∂B(r) since hi has a ﬁrst order zero at the center of B(r).

∂ ∂r

log λhi r dθ = 2π,

5.6 Divisors and Line Bundles

Altogether, we obtain

229

c1 ([D], λ2 ) = 1, Σ

which is the formula we had to show.

Remark. We see from the preceding result that we may deﬁne the degree of a line bundle L on Σ as c1 (L).

deg(L) := Σ

Then, for a divisor D, deg ([D]) = deg D. (5.6.11) The proof of Theorem 5.6.3 yields an alternative way to see Lemma 5.4.2: Corollary 5.6.2 Let L be a line bundle of deg L < 0. Then L has no nontrivial holomorphic section. Proof. Let h be a holomorphic section with zeroes p1 , · · · , pk . Take small balls B(pj , r) as in the proof of Thm. 5.6.3. We compute 1 ∂2 ∂2 1 2 log λ dz ∧ d¯ log |h|2 dz ∧ d¯ z= z. 2πi ∂z∂ z¯ 2πi ∂z∂ z¯ k Σ\ B(pj ,r) Σ\

B(pj ,r)

j=1

As r → 0, the lhs tends to deg L, whereas the rhs tends to

k j=1

by the proof of Thm. 5.6.3.

ordpj h ≥ 0,

The preceding concepts allow the reformulation of the Riemann-Roch theorem in terms of holomorphic sections of line bundles: Corollary 5.6.3 Let L be a line bundle on the compact Riemann surface Σ of genus p. Then the dimension of the space of holomorphic sections of L satisﬁes the relation h0 (L) = deg L − p + 1 + h0 (K ⊗ L−1 ) where K, as always, is the canonical bundle of Σ. Proof. ¿From Theorem 5.4.1 and the identiﬁcations observed in Theorems 5.6.1 and 5.6.2 and (5.6.10).

Let us discuss some examples to remind ourselves of this fundamental theorem and to check the consistency. When L is the trivial line bundle we know from our previous discussion that deg L = 0, and also h0 (L) = 1 since the holomorphic sections are the constants. The Riemann-Roch theorem

230

5 Geometric Structures on Riemann Surfaces

then yields h0 (K) = p. Taking now L = K in Riemann-Roch, we obtain deg K = 2p − 2. Of course, this is not a new derivation of this result already obtained in Lemma 5.4.4 because that lemma had been used as an ingredient in the proof of Riemann-Roch. We now want to interpret some of the constructions of § 2.3 and § 2.5 in the light of the preceding results. For this purpose, we also need to consider transformation properties of line bundles, metrics, etc. w.r.t. sets that are open in the standard topology on Σ, but not necessarily in the Zariski topology. We ﬁrst look at a canonical divisor K, the divisor of a holomorphic 1-form α = φ1 (z1 ) dz1 , z1 being deﬁned in a coordinate chart O1 . In a diﬀerent local coordinate chart O2 , with coordinate z2 , α = φ2 (z2 ) dz2 . Thus φ1 (z1 ) = φ2 (z2 )

∂z2 ∂z1

in O1 ∩ O2 .

Therefore, the transition function for the canonical bundle [K] w.r.t. coordinate transformations is g12 =

∂z2 , ∂z1

cf. (5.6.5).

A Hermitian metric on [K], given by λ2i on Oi , then has to transform via λ21 = λ22

∂z2 ∂z 2 ∂z1 ∂z 1

−1 ,

cf. (5.6.6).

We then deﬁne the holomorphic tangent bundle T Σ of Σ as the inverse of the canonical bundle: T Σ := [K]−1 . 2 ∂z 2 A Hermitian metric on T Σ then has to transform with ∂z ∂z1 ∂z 1 . This is precisely the transformation behaviour of a conformal Riemannian metric on Σ as deﬁned in Deﬁnition 2.3.1. We also recall that if λ2 (z)dzdz is such a metric, its curvature is

K=−

2 ∂2 log λ2 , λ2 ∂z∂z

cf. Deﬁnition 2.3.4. We thus observe 1 ∂2 log λ2 dz ∧ dz 2πi ∂z∂z 1 Kλ2 dz ∧ dz. =− 4πi

c1 (T Σ) =

5.6 Divisors and Line Bundles

231

The Gauss-Bonnet theorem, Corollary 2.5.6, then says −1 2 Kλ dz ∧ dz = c1 (T Σ) = deg T Σ = − deg[K] 2 − 2p = 4πi Σ Σ (cf. Lemma 5.4.4). Let us conclude this section with a simple example: We consider the Riemann surface S 2 = (x1 , x2 , x3 ) ∈ R3 : x21 + x22 + x23 = 1 with the Zariski open sets U1 = S 2 \ {(0, 0, 1)} , U2 = S 2 \ {(0, 0, −1)}

as in § 1.1,

and the divisor D = (0, 0, 1) with deg D = 1. 1 +ix2 on U1 , z2 = We also choose the local coordinates z1 = x1−x 3 as in § 2.1. In these coordinates, D is deﬁned by f1 = 1 on U1 ,

x1 −ix2 1+x3

f2 = z on U2 .

(The point (0, 0, 1) corresponds to z1 = ∞ and z2 = 0.) The associated line bundle [D] then has transition function g12 =

1 on U1 ∩ U2 z

in these coordinates.

We may equip [D] with a Hermitian metric by putting λ21 = 1 + |z|2 , λ22 = 1 +

1 |z|2

in our coordinates.

On U1 , the ﬁrst Chern class c1 ([D]) then is given by 1 1 ∂2 1 log 1 + |z|2 dz ∧ dz = . 2πi ∂z∂z 2πi (1 + |z|2 )2 We have

c1 ([D]) = S2

1 2π 2πi

∞

1 2 r2 )

2 r dr, i

(1 + using polar coordinates with r = |z|, ∞ 1 =− 2 ds (1 + s) 0 =1 0

which coincides with deg D as it should be.

on U2

232

5 Geometric Structures on Riemann Surfaces

On S 2 with the preceding local coordinates, we also consider the meromorphic 1-form η that is given by dz1 on U1 . z1 Since the transformation for the local coordinates is z2 = also given by dz2 on U2 . z2 Therefore, a canonical divisor K is obtained as

1 z1

(see § 2.1), η is

(η) = −(0, 0, −1) − (0, 0, 1). The holomorphic tangent bundle T S 2 then is the line bundle deﬁned by the divisor E = (0, 0, −1) + (0, 0, 1). ¿From the preceding computation, we conclude that c1 ([K]−1 ) = 2 c1 ([D]) = 2 S2

S2

which again agrees with the result that the general theory requires. Of course, we may also consider the meromorphic 1-form that is given by dz1 2 on U1 and by dz on U2 . Then (η) is linearly equivalent to (ω), namely z2 2

(η) − (ω) = (f ) with the meromorphic function f given by z1 on U1 and by also (ω) = −2 (0, 0, 1).

1 z2

on U2 , and

In particular, we also have E − 2D = (f ). This again conﬁrmes the formula for S 2 c1 ([K]−1 ) computed above.

Exercises for § 5.6 1)

Interpret the Riemann-Hurwitz formula (Theorem 2.5.2) in terms of the constructions of this section. Hint: If f : Σ1 → Σ2 is a holomorphic map between compact Riemann surfaces, and if α is a holomorphic 1-form on Σ2 , then f ∗ α is a holomorphic 1-form on Σ1 . Relate the divisor (f ∗ α) and the divisor f ∗ (α), the preimage of the divisor of α. (Note that the same exercise was already asked in § 5.4. Compare your present answer with the previously given one!)

5.7 Projective Embeddings

233

5.7 Projective Embeddings We begin by introducing complex projective space Pd ; it is the space of complex one-dimensional subspaces of Cd+1 . Such a subspace L is uniquely determined by any one Z ∈ L\{0}, so that (5.7.1) Pd := [Z] : Z ∈ Cd+1 \{0}, Z ∼ λZ , i.e. we identify Z and λZ (λ ∈ C\{0}). One usually considers on Pd the so-called homogeneous coordinates Z = (Z0 , . . . , Zd ); here, the Zi should not all vanish, and Z is identiﬁed with λZ = (λZ0 , . . . , λZd ) for all λ ∈ C\{0}. Hence, on the subset Ui := {(Z0 , . . . , Zd ) : Zi = 0} of Pd , we may divide by Zi and obtain a bijection (5.7.2) ui : Ui → Cd , Z0 Z0 Zi−1 Zi+1 Zd Zi−1 Zi+1 Zd := . ,..., , 1, ,..., ,..., , ,..., ui Zi Zi Zi Zi Zi Zi Zi Zi The coordinates deﬁned by the ui are called euclidean coordinates. The coordinate transformations uj ◦u−1 i are holomorphic on their domains of deﬁnition ui (Ui ∩ Uj ) (which are open sets in Cd ). Hence Pd can be made a complex manifold. It can also be seen that P1 is just the Riemann sphere. Namely, for d = 1, we have the coordinate charts u0 : U0 = {(Z0 , Z1 ) : Z0 = 0} → C Z1 (Z0 , Z1 ) → =z Z0 and u1 : U1 = {(Z0 , Z1 ) : Z1 = 0} → C Z0 (Z0 , Z1 ) → , Z1 and the transformation between them is given by u1 ◦ u−1 0 : z →

1 , z

and so we recover the representation of S 2 obtained in § 2.1. For all d, Pd is compact, since we have a continuous map of the unit sphere in Cd+1 onto Pd .

234

5 Geometric Structures on Riemann Surfaces

Let now Σ be a compact Riemann surface of genus p, and K its canonical divisor. Suppose p > 0, and let α1 , . . . , αp be a basis for H 0 (Σ, Ω 1 ). By Corollary 5.4.3, the αi do not all vanish at any point of Σ, hence we get a well-deﬁned map iK : Σ → Pp−1 by writing the αi locally as αi = fi dz and setting iK := (f1 (z), . . . , fp (z)).

(5.7.3)

This map is well-deﬁned independently of the choice of the local charts, since all the fj (z) get multiplied by the same (non-zero) factor when we go to a diﬀerent local parameter, so that the point iK (z) remains the same in Pp−1 . The map iK is called the canonical map of Σ, and its image iK (Σ) ⊂ Pp−1 the canonical curve. We now wish to investigate the conditions under which iK will be an embedding. It is not hard to see that iK is injective precisely when, for any two distinct z1 , z2 ∈ Σ, there exists α ∈ H 0 (Σ, Ω 1 ) such that α(z1 ) = 0, α(z2 ) = 0. Similarly, iK will have maximal rank at z ∈ Σ precisely when there exists an α in H 0 (Σ, Ω 1 ) for which z is a simple zero. Hence iK is an embedding precisely when, for any two not necessarily distinct points z1 , z2 ∈ Σ, (5.7.4) h0 (K − z1 − z2 ) < h0 (K − z1 ). Now we know already by Corollary 5.4.3 (since p > 0) that h0 (K − z1 ) = p − 1.

(5.7.5)

On the other hand, the Riemann-Roch theorem yields h0 (z1 + z2 ) = 2 − p + 1 + h0 (K − z1 − z2 ).

(5.7.6)

Hence (5.7.4) is equivalent to h0 (z1 + z2 ) = 1

(5.7.7)

(recall that h0 (D) ≥ 1 for D eﬀective). And (5.7.4) fails, i.e. h0 (K − z1 − z2 ) = h0 (K − z1 ) = p − 1, precisely when h0 (z1 + z2 ) = 2.

(5.7.8)

But (5.7.8) means precisely that there exists a non-constant meromorphic function g with (5.7.9) (g) + z1 + z2 ≥ 0, i.e. g has at the most two simple poles or one double pole (according as z1 , z2 are distinct or not). In any case, such a g exhibits Σ as a (branched) holomorphic two-sheeted covering of S 2 via the map g : Σ → S 2 .

5.7 Projective Embeddings

235

Deﬁnition 5.7.1 A compact Riemann surface Σ of genus p > 1 which admits a two-sheeted holomorphic map g : Σ → S 2 is said to be hyperelliptic. Remark. Riemann surfaces of genus one are called elliptic; they always admit a two-sheeted map to S 2 . In order to construct projective imbeddings for hyperelliptic surfaces as well, we consider instead of K the divisors mK, m ≥ 2. As in the proof of Corollary 5.4.1, we see that, quite generally, h0 (mK) = 0, 0

h (mK) = 1,

p=0

(5.7.10)

p=1

(5.7.11)

h (mK) = (2m − 1)(p − 1), 0

p ≥ 2, m ≥ 2.

(5.7.12)

We have also seen that, if p ≥ 1, then there exists for each z ∈ Σ an α ∈ H 0 (Σ, Ω 1 ) with α(z) = 0. (5.7.13) And then αm (z), deﬁned locally by f m (z)dz m if α(z) = f (z)dz, is a so-called m-canonical form, with divisor (αm ) = mK.

(5.7.14)

Thus, for each z ∈ Σ, there also exists an m-canonical form which does not vanish at z. (Remark. A 2-canonical form is just a holomorphic quadratic diﬀerential.) Now let β1 , . . . , βk (k = (2m − 1)(p − 1)) be a basis for the vector space of m-canonical forms. Then, by what has been said above, imK : Σ → Pk−1

(5.7.15)

imK = (β1 (z), . . . , βk (z)) gives a well-deﬁned map. The condition that imK be an embedding is, as before, that (5.7.16) h0 (mK − z1 − z2 ) < h0 (mK − z1 ) for all (not necessarily distinct) z1 , z2 ∈ Σ. We know already that h0 (mK − z1 ) = h0 (mK) − 1,

(5.7.17)

since not all m-canonical forms vanish at z1 . Also deg (mK − z1 − z2 ) = m(2p − 2) − 2.

(5.7.18)

236

5 Geometric Structures on Riemann Surfaces

Hence by Riemann-Roch h0 (mK − z1 − z2 ) (5.7.19) 0 = m(2p − 2) − 2 − p + 1 + h (−(m − 1)K + z1 + z2 ) . Thus, if (5.7.16) fails, i.e. h0 (mK − z1 − z2 ) = h0 (mK − z1 ) = (2m − 1)(p − 1) − 1,

(5.7.20)

then (5.7.19) yields: h0 (−(m − 1)K + z1 + z2 ) = 1, hence by Lemma 5.4.2 deg (−(m − 1)K + z1 + z2 ) ≥ 0, i.e.

deg ((m − 1)K − z1 − z2 ) ≤ 0.

This is equivalent to

(5.7.21)

(m − 1)(2p − 2) − 2 ≤ 0,

i.e.

(m − 1)(p − 1) ≤ 1.

(5.7.22)

Since we are assuming m ≥ 2, p ≥ 2, this happens only if m = 2,

p = 2.

(5.7.23)

Thus we see that, if p ≥ 2, i3K : Σ → P5p−6 is always an embedding. We can now state: Theorem 5.7.1 Every compact Riemann surface admits a (holomorphic) embedding in a complex projective space. In fact, a surface of genus zero is biholomorphic to P1 , a surface of genus one can be embedded in P2 , and a surface Σ of genus p ≥ 2 can be embedded by the tri-canonical map i3K in P5p−6 . If Σ is not hyperelliptic, then the canonical map iK embeds Σ in Pp−1 . Proof. Only the case p = 1 remains to be treated. Fix any z0 ∈ Σ. Since p = 1, we know deg K = 0, hence h0 (K − 2z0 ) = h0 (K − z0 ) = 0.

(5.7.24)

Hence h0 (2z0 ) = 2 by Riemann-Roch. Hence there exists a non-constant meromorphic function g on Σ, holomorphic on Σ\{z0 }, with a pole of order two at z0 .

5.7 Projective Embeddings

237

As we have seen already, because h0 (Σ, Ω 1 ) = 1 and deg K = 0, there exists a holomorphic 1-form α on Σ which has no zeroes at all. Consider the meromorphic 1-form gα. This is holomorphic on Σ\{z0 }, hence Resz0 (gα) = 0 by Lemma 5.3.1. Fixing a local parameter z around z0 (vanishing at z0 ), we may, by replacing g by ag + b, a, b ∈ C, if necessary, assume that g has the Laurent expansion 1 (5.7.25) g = 2 + a1 z + · · · . z We now consider the meromorphic function dg . α Since α has no zeroes, dg α is also holomorphic on Σ\{z0 }, and has a pole of order three at z0 . Hence for suitable constants c1 , c2 , c3 we can ensure that g := c1

dg + c2 g + c3 α

has the Laurent expansion g (z) = −

2 + a2 z + · · · . z3

(5.7.26)

We can now deﬁne a map i : Σ → P2 i(z) := (1, g(z), g (z)) . (Near z0 , we think of i as the map i(z) = (z 3 , z 3 g(z), z 3 g (z)).) We claim that i is an embedding. First observe that 1, g, g ∈ L(D), where D = 3z0 . In fact they span L(D), since h0 (D) = 3 by Riemann-Roch, and 1, g, g are obviously linearly independent. Again by Riemann-Roch we can check the condition h0 (D − z1 − z2 ) < h0 (D − z1 ) which ensures that i is an embedding. This completes the proof of Theorem 5.7.1.

We wish to draw a corollary of the above proof for surfaces of genus one. With the notation of the proof of Theorem 5.7.1, we compute (5.7.27) g (z)2 = 4z −6 + γ1 z −2 + a−1 z −1 + a0 + · · · 3 −6 −3 −2 −1 g(z) = z + γ2 z + γ3 z + b−1 z + b0 + · · · . (5.7.28)

238

5 Geometric Structures on Riemann Surfaces

Hence the meromorphic function g (z)2 − 2γ2 g (z) − 4g(z)3 + (4γ3 − γ1 ) g(z), which is holomorphic on Σ\{zo } and has a pole of order ≤ 1 at z0 , must reduce to a constant (otherwise we would have a holomorphic map Σ → S 2 of degree one). Thus i(Σ) can be described by an equation of the form y 2 + cy = 4x3 + ax + b Z2 2 1 (c = −2γ2 , a = γ1 − 4γ3 ; x = Z Z0 , y = Z0 inhomogenous coordinates in P ). By aﬃne coordinate changes in x and in y, we can reduce this to

˜x + ˜b, y 2 = x3 + a

(5.7.29)

y 2 = x(x − 1)(x − λ)

(5.7.30)

or even since two of the roots of the right side of (5.7.29) may be assumed to be 0 and 1 by a further linear change of coordinates. Thus we have proved: Theorem 5.7.2 Every compact Riemann surface of genus one is the set of zeroes of a cubic polynomial y 2 = x(x − 1)(x − λ),

λ ∈ C\{0, 1}

in P2 .

We now want to show that every compact Riemann surface can even be embedded in P3 . For this purpose, we ﬁrst make some remarks about the geometry of Pd . We begin by observing that the non-singular linear transformations of Cd+1 induce transformations of Pd : A = (aij ), i, j = 0, . . . , d, det A = 0, operates by d d ai0 Zi , . . . , aid Zi . (Z0 , . . . , Zd ) → i=0

i=0

Obviously these transformations operate transitively on Pd , and are the higher dimensional analogs of the M¨ obius transformations on S 2 . d Now let p0 be any point of P . After a linear transformation, we may assume p0 = (1, 0, . . . , 0). Then we can project Pd \{p0 } onto a subspace Pd−1 : p = (Z0 , . . . , Zd ) → (Z1 , . . . , Zd ) ∈ Pd−1 .

(5.7.31)

5.7 Projective Embeddings

239

Clearly this map is well-deﬁned for p = p0 . Further, given two distinct points p1 = Z01 , . . . , Zd1 , p2 = Z02 , . . . , Zd2 of Pd , there exists a unique “line” (i.e. a subspace of Pd isomorphic to P1 ) containing p1 and p2 , namely λ1 Z01 + λ2 Z02 , . . . , λ1 Zd1 + λ2 Zd2 : (λ1 , λ2 ) ∈ C2 \{0} . Similarly, for every p ∈ Pd and every tangential direction at p, there is a line through p in that direction. Suppose now that Σ is a Riemann surface embedded in Pd (also brieﬂy called a “nonsingular curve” in Pd ). For distinct points p and q on Σ, the line through p and q is called the secant of Σ determined by p and q. Similarly, the line through p ∈ Σ which is tangential to Σ at p is called the tangent to Σ at p. Now suppose p0 ∈ Pd is contained in no secant or tangent of Σ, and let π : Pd \{p0 } → Pd−1 denote the projection deﬁned above. Then π|Σ is injective and has maximal rank everywhere on Σ. Indeed, the injectivity is clear. Also, π|Σ has maximal rank at p ∈ Σ precisely when the line through p0 and p intersects Σ transversally at p, i.e. is not tangent to Σ at p. We can now easily prove Theorem 5.7.3 Every compact Riemann surface Σ can be embedded in P3 . Proof. By Theorem 5.7.1, Σ can be embedded in some Pd . The union of all secants and tangents of Σ has complex dimension ≤ 3. Thus, if d ≥ 4, we can always ﬁnd p0 ∈ Pd through which no secant or tangent of Σ passes. Hence we can project from p0 to Pd−1 , and obtain an embedding of Σ in Pd−1 . We

can repeat this procedure till we get an embedding in P3 . To conclude this section, we note: Theorem 5.7.4 Every compact Riemann surface of genus p can be represented as a branched covering of S 2 (= P1 ) with at the most p + 1 sheets. Proof. For any z0 ∈ Σ, consider the divisor D = (p + 1)z0 . Then, by Riemann-Roch, h0 (D) ≥ 2 . Hence there exists a non-constant meromorphic function g : Σ → S 2 with only one pole, of order ≤ p + 1.

In many cases, the minimal number of sheets is obviously less than p + 1. We have seen for instance that hyperelliptic surfaces (which exist in every genus) can be represented as two-sheeted coverings of S 2 . Theorem 5.7.4 says in particular that every abstract Riemann surface has a concrete realisation as a ramiﬁed covering of S 2 . The number of branch points (counted with multiplicity) can be calculated from the Riemann-Hurwitz formula.

240

5 Geometric Structures on Riemann Surfaces

Exercises for § 5.7 1)

Let h : Σ → Σ be a conformal self-map, diﬀerent from the identity, of a compact Riemann surface Σ of genus p. Show that h has at most 2p + 2 ﬁxed points. (Hint: Consider a meromorphic function f : Σ → S 2 with a single pole of order ≤ p + 1 at some z0 which is not a ﬁxed point of h, and study f (z) − f (h(z))).

5.8 Algebraic Curves Let Σ again be a compact Riemann surface, and z = z(w) a non-constant meromorphic function of degree n on Σ. By Theorem 5.7.4, there exists for example such a function z for some n ≤ p + 1, p = genus of Σ. Let f be any other meromorphic function on Σ. We remove from S 2 the point z = ∞, the z-images of the branch points of z and those points whose inverse images by z contain poles of f . Let S denote the punctured sphere thus obtained. Then each point in S has n distinct inverse images under z, say w1 , . . . , wn , and the f (wi ) are ﬁnite. Hence we can form the ν-th elementary symmetric function of the f (wi ): σν (z) := (−1)ν f (wn1 ) · · · f (wnν ) . 1≤n1 <···
Then we have Theorem 5.8.1 Let z = z(w) be a meromorphic function of degree n on a compact Riemann surface Σ, and f any other meromorphic function on Σ. Then f satisﬁes an algebraic equation f n + σ1 (z)f n−1 + · · · + σn−1 (z)f + σn (z) = 0

(5.8.1)

of degree n, where the σν , ν = 1, . . . , n are rational functions. Proof. We use the notation of the discussion preceding the theorem. Consider ﬁrst a point z ∈ S . Since the σν (z) do not depend on the order in which the wi are taken, they are well-deﬁned on S . Consider now the polynomial P (z, x) = xn + σ1 (z)xn−1 + · · · + σn (z) n ' (x − f (wµ )) =

(5.8.2)

µ=1

(by deﬁnition of the σν ). It is clear that P (z, f ) = 0 over S .

(5.8.3)

5.8 Algebraic Curves

241

It is clear that the σν are holomorphic on S , since z is locally biholomorphic over S , and f is also holomorphic over S . We claim that the singularities of the σν at the (ﬁnitely many) points outside S are at worst poles. Indeed, / S , then for k = maximum of the orders of the poles of f lying over if z 0 ∈ 0 z , it is clear that (z − z 0 )k f is holomorphic at each w ∈ Σ with z(w) = z 0 . It follows that (z − z 0 )kn σν (for example) is bounded, hence holomorphic at z0 as well. (If z 0 = ∞, we must argue with z −1 instead of z − z 0 .) It follows that the σν are meromorphic functions on S 2 , hence rational functions. Of

course (5.8.3) continues to hold over S\S as well. Theorem 5.8.2 Let z = z(w) be a meromorphic function of degree n on Σ. Then there exists a meromorphic function f on Σ for which the polynomial P (z, x) of degree n constructed above (cf. (5.8.1) and (5.8.3)) is irreducible, i.e. is not the product of two polynomials of degrees > 0 with rational functions as coeﬃcients. Proof. Let z 0 ∈ S 2 be such that z −1 (z 0 ) consists of n distinct points w10 , . . . , wn0 of Σ. By the Riemann-Roch theorem, there exists for each µ ∈ {1, . . . , n} a meromorphic function gµ which has a pole at wµ0 and zeros at all the wλ0 , λ = µ. (Of course gµ will in general have further zeros and poles as well.) In order to obtain an example of such a gµ , one simply takes the divisor D = (p + n − 1) wµ0 − λ =µ wλ0 in Thm. 5.4.1. Then deg D ≥ p, and therefore there exists a meromorphic function with zeroes at the wλ0 (λ = µ) and a pole of order ≥ n − 1 at wµ0 , since wµ0 is the only point where a pole is permitted. Now choose n distinct complex numbers c1 , . . . , cn , and set n ( n f (w) := cµ gµ (w) gµ (w) . µ=1

µ=1

Then f is a meromorphic function on Σ with f wµ0 = cµ , so that f takes distinct ﬁnite values at the wµ0 . We shall now show that the polynomial P (z, x) corresponding to this f is irreducible. Suppose if possible that P (z, x) = P1 (z, x) · P2 (z, x) Then P1 (z, f ) · P2 (z, f ) = P (z, f ) ≡ 0 on Σ, hence P1 (z, f ) ≡ 0 or P2 (z, f ) ≡ 0. Let us suppose that P1 (z, f ) ≡ 0. We can ﬁnd a point z 1 in S 2 arbitrarily close to z 0 which is not a pole of any of the coeﬃcients of P1 (z, x). The function f still takes n distinct values over z 1 by continuity, and these will be roots of the polynomial P1 (z 1 , x). Hence deg P1 = n, and deg P2 = 0, so that we have proved the irreducibility of P (z, x).

242

5 Geometric Structures on Riemann Surfaces

We now recall that, conversely, given any irreducible polynomial P (z, x) = xn + s1 (z)xn−1 + · · · + sn (z) with rational functions sν (z) as coeﬃcients, one constructs in classical function theory an associated Riemann surface. (In fact this idea, which goes back to Riemann, was the starting point of the whole theory). We shall only brieﬂy sketch the procedure here, and refer the reader to [A1] for details. As before, one ﬁrst discards from S 2 the poles of the sν (z) and also the points where the discriminant of P (z, x) vanishes (i.e. the points z at which the equation (5.8.4) P (z , x) = 0 has fewer than n distinct roots). Let us denote the sphere punctured in this way again by S . Then, in a neighborhood of each z 0 ∈ S , we can ﬁnd n diﬀerent function elements, f1 (z), . . . , fn (z), all of which satisfy the equation P (z, fµ (z)) = 0. Each fµ (z) can be analytically continued along every curve in S ; by the monodromy theorem, the element contained by continuation depends only on the homotopy class of the curve in S , and continues to satisfy the equation (5.8.4). Thus all these function elements can be put together in a natural way into a Riemann surface. This Riemann surface will be an unbranched n-sheeted covering of S . To obtain a compact Riemann surface, one has only to study what happens around the excluded points of S. It turns out that the function elements around such a point z can be expanded in a Laurent 1 series (with at the most ﬁnitely many negative powers) in (z − z ) k ; here k is an integer, 1 ≤ k ≤ n. (Such a series is also termed a Puiseux series.) The points where k > 1 will be branch points of the completed Riemann surface lying over S 2 . We now return to our Riemann surface Σ (of Theorem 5.8.2), on which, given the meromorphic function z of degree n, we found a meromorphic function f satisfying as irreducible equation P (z, x) = 0 of degree n. It is now easy to see that Σ is bijective with the Riemann surface corresponding to the irreducible equation P (z, x) = 0. This is clear over S (the subset of S 2 over which there are no branch points of z : Σ → S 2 ), since diﬀerent points of Σ over S yield diﬀerent function elements (z, f ) satisfying P (z, x) = 0. This bijection is in fact conformal since (over S ) both Riemann surfaces are unbranched holomorphic coverings. Indeed, at any w ∈ Σ with z(w) = z 0 , we 1 1 can take (z − z0 ) k or z − k for some k, 1 ≤ k ≤ n, as a local parameter at w, and this is also a conformal parameter on the Riemann surface constructed from the algebraic equation. Thus Σ is in fact conformally equivalent to the Riemann surface constructed from the irreducible equation P (z, x) = 0 satisﬁed by f .

5.8 Algebraic Curves

243

We have thus proved: Theorem 5.8.3 Every compact Riemann surface Σ can be represented as the Riemann surface of an irreducible algebraic equation P (z, x) = 0.

(5.8.5)

More precisely, for any non-constant meromorphic function z(w) on Σ, we can construct a meromorphic function f (w) as in Theorem 5.8.2, and then the map w → (z(w), f (w)) is a conformal bijection of Σ onto the compact Riemann surface associated to the irreducible equation satisﬁed by f (over the ﬁeld of rational functions in z).

Thus the abstractly deﬁned Riemann surface (cf. Deﬁnition 2.1.2), as introduced and studied by Klein and especially Weyl following Riemann’s original concrete construction of Riemann surfaces, has again led us back to the idea which inspired Riemann, and the circle is complete. Theorems 5.7.1 and 5.8.1 have the following consequence: Theorem 5.8.4 Every compact Riemann surface Σ can be represented as an algebraic curve, i.e. Σ can be holomorphically embedded in some Pd , and the image of Σ can be described by algebraic equations. Proof. In the proof of Theorem 5.7.1, Σ has been embedded into some Pd via a canonical (or a 3-canonical) map, i.e. by holomorphic diﬀerential forms of type f (z)dz (or f (z)dz 3 , resp.). The quotient of two such forms is a meromorphic function, and thus the embedding is given by d meromorphic functions on Σ. By Theorem 5.8.1, any two of these meromorphic functions are related by an algebraic equation P (z, f ) = 0. The collections of these equations then describe the embedding.

Remark. (d − 1) algebraic equations actually suﬃce to describe a compact curve in Pd . The argument of the preceding proof does not yield this minimal number, however. Although selecting one meromorphic function z(w) among the ones describing the embedding and taking the (d − 1) equations P (z, f ) = 0 satisﬁed by the other meromorphic functions deﬁnes a curve in Pd containing the given one, in general this curve may contain other irreducible components. In order to see this, consider the embedding t → (t, t2 , t3 ) C → C3 = {(x, y, z)}.

244

5 Geometric Structures on Riemann Surfaces

Selecting t2 as initial meromorphic function, we obtain the equations x2 − y = 0,

z 2 − y 3 = 0.

These equations are not only solved by the original curve, but also by the curve t → (−t, t2 , t3 ) C → C3 . Corollary 5.8.1 Every compact Riemann surface can be represented as an algebraic space-curve, i.e. an algebraic curve in P3 . Proof. We have already seen that an embedding of a compact Riemann surface in any Pd leads by repeated projections to one in P3 . The argument of the proof of Theorem 5.8.4 now yields our assertion.

Remark.

An algebraic curve in P2 is called a plane curve.

We shall now consider some examples to illustrate the above discussion. We have seen in § 5.7 that an elliptic curve Σ (i.e. a Riemann surface of genus one) can always be described by an equation y 2 − x(x − 1)(x − λ) = 0,

λ ∈ C\{0, 1}.

(5.8.6)

Thus Σ becomes (via x) a branched covering of degree two of S 2 . Branch points lie over x = 0, x = 1 and x = λ. Since the total ramiﬁcation is 4 by the Riemann-Hurwitz formula, and since a map of degree two can have only simple ramiﬁcations, we must have a branch point over x = ∞. In homogeneous coordinates (x, y, z), (5.8.6) becomes y 2 z − x3 + (1 + λ)x2 z − λxz 2 = 0.

(5.8.7)

Thus Σ will now be described by this algebraic equation in P2 . But we must still check that the curve described by (5.8.7) in P2 is everywhere nonsingular. For this, we must check that the partial derivatives of P (x, y, z) := y 2 z − x3 + (1 + λ)x2 z − λxz 2 do not all vanish at any point of Σ. Now ∂P = −3x2 + 2(1 + λ)xz − λz 2 , ∂x ∂P = 2yz, ∂y ∂P = y 2 + (1 + λ)x2 − 2λxz, ∂z

5.8 Algebraic Curves

245

and these three expressions have no (non-trivial) common zero, since λ = 0, 1. For purposes of comparison, we also consider a curve Σ of the form y 2 − (x − λ1 )(x − λ2 )(x − λ3 )(x − λ4 ) = 0

(5.8.8)

(λi ∈ C distinct). This curve is again a two-sheeted covering of S 2 . There is ramiﬁcation over the λi . The branch points have again to be simple, and the total order of ramiﬁcation has to be even (Corollary 2.5.6), hence there can be no ramiﬁcation over ∞ in this case. It follows from the Riemann-Hurwitz formula (Theorem 2.5.2) that the genus of Σ must again be one. The equation (5.8.8) in homogeneous coordinates, namely y 2 z 2 − x4 · · · − λ1 λ2 λ3 λ4 z 4 = 0

(5.8.9)

no longer describes an embedding of Σ in P2 , since all the partial derivatives of the polynomial on the left in (5.8.9) vanish at (0, 1, 0). This point corresponds to the point ∞ of S 2 , and we had indeed seen already that this point should have two diﬀerent points over it in Σ. Let us also note that Theorem 5.8.4 is a special case of a theorem of Chow, according to which every complex-analytic subvariety of Pd can be described by algebraic equations. The proof of Chow’s theorem is quite simple, but naturally requires notions of higher-dimensional complex analysis, and cannot be presented here. We now wish to study the ﬁeld K(Σ) of meromorphic functions on a compact Riemann surface Σ. First of all we have: Theorem 5.8.5 K(Σ) is a ﬁnite algebraic extension of the ﬁeld of rational functions C(z) in one variable over C; in fact if z ∈ K(Σ) is non-constant, then K(Σ) is got by adjoining an f as in Theorem 5.8.2 to C(z). Thus if P (z, x) is the irreducible polynomial satisﬁed by f over C(z) (Theorem 5.8.2), then K(Σ) ∼ (5.8.10) = C(z)[x]/P (z, x) under the map f ↔ x. Proof.

With the notation of Theorem 5.8.2, we have a homomorphism C(z)[x]/P (z, x) → K(Σ)

(5.8.11)

mapping x to f , since P (z, f ) = 0 by construction. Since P (z, x) is irreducible, C(z)[x]/P (z, x) is a ﬁeld; hence it is isomorphic under the above map to the subﬁeld L of K(Σ) generated by z and f over C. Clearly the degree of L over C(z) = n = deg P (z, x) (= deg(z : Σ → S 2 )), since P (z, x) is irreducible. We know by Theorem 5.8.1 that each g ∈ K(Σ) is algebraic of degree ≤ n over C(z). Hence we must have K(Σ) = L (otherwise any g ∈ K(Σ)\L would have degree > n over C(z)).

246

5 Geometric Structures on Riemann Surfaces

A non-constant holomorphic map h : Σ1 → Σ2 of compact Riemann surfaces induces a (C-linear) homomorphism (hence injection) (5.8.12) h∗ : K(Σ2 ) → K(Σ1 ) of ﬁelds, deﬁned by

h∗ (f )(w) := f (h(w))

(5.8.13)

for w ∈ Σ1 , f ∈ K(Σ2 ). From the algebraic point of view, it is thus natural to reverse the procedure, and directly consider homomorphisms between such function-ﬁelds. As is clear from Theorem 5.8.5, the representation of K(Σ) as C(z)[x]/P (z, x) is far from unique. Instead of z (Theorem 5.8.5) we could have chosen some other (non-constant) ζ ∈ K(Σ), of degree m say, and then found a g ∈ K(Σ) satisfying an irreducible equation R(ζ, g) = 0

(5.8.14)

of degree m. And then every meromorphic function on Σ can also be expressed in terms of ζ and g. In particular we will have relations of the type z = r1 (ζ, g), f = r2 (ζ, g), (5.8.15) η = s1 (z, f ), g = s2 (z, f ), where r1 , r2 , s1 , s2 are rational functions of two variables over C. We shall now consider this algebraic point of view in some detail, i.e. we shall study algebraic function-ﬁelds of one variable over C. These ﬁelds are, by deﬁnition, ﬁnitely generated ﬁelds of transcendence degree one over C, and are hence in fact generated by two elements. That the transcendence degree is one therefore just means that the ﬁelds are of the form C(z)[x]/P (z, x). And we have just seen that such a ﬁeld is precisely the ﬁeld of meromorphic functions on the compact Riemann surface determined by the equation P (z, x) = 0. The important algebraic notion in this context is the following: Deﬁnition 5.8.1 A (discrete, non-archimedian) valuation of a ﬁeld K, (in exponent-notation,) is a function w on K such that, for all a, b ∈ K, (i) w(a) ∈ Z if a = 0, (ii) w(0) = ∞, (iii) w(ab) = w(a) + w(b), (iv) w(a + b) ≥ min(w(a) + w(b)). It is obvious from (i) and (ii) that w(1) = 0, w(−1) = 0, and w(a) = w(−a). The following remark is sometimes useful: If w(a) = w(b), then w(a + b) = min(w(a), w(b)).

(5.8.16)

5.8 Algebraic Curves

247

Proof. Let e.g. w(a) < w(b); we must show that w(a + b) = w(a). Suppose now that w(a + b) > w(a). Then w(a + b) and w(−b) = w(b) are both greater than w(a), contradicting the inequality w(a) ≥ min(w(a + b), w(−b)).

We shall ﬁrst study the valuations of the ﬁeld of rational functions C(z). Note that, for all c ∈ C\{0}, w(c) = 0, (5.8.17) since w(c) = nw(c1/n ) by (iii), and w(c1/n ) ∈ Z. Let us discard the uninteresting case when w(f ) = 0 for all polynomials (for then w(f /g) = 0 for all quotients as well, so that the valuation is trivial). Then there are two possibilities: (1) (2)

w(f ) ≥ 0 for all polynomials f , there exists a polynomial f with w(f ) < 0.

In case 1), there exists a polynomial f with w(f ) > 0 (since w is not trivial). We can decompose f into irreducible factors, and then (by (iii)) we must have w(p) =: w0 > 0 for at least one irreducible factor p of f . We now claim that w(q) = 0 for every polynomial q not divisible by p. Indeed, since p and q are relatively prime, we can ﬁnd polynomials r1 and r2 such that r1 p + r2 q = 1 (Euclidean algorithm). Then w(1) = w(r1 p + r2 q) ≥ min (w(r1 p), w(r2 q)) and w(r1 p) = w(r1 ) + w(p) > 0. Thus, if w(q) > 0, we would also have w(r2 q) = w(r2 ) + w(q) > 1, hence w(1) > 0, which is a contradiction.

248

5 Geometric Structures on Riemann Surfaces

An arbitrary polynomial q can be written uniquely as f = pm q, where q is not divisible by p, and then w(f ) = mw(p) + w(q) = mw0 . Similarly, for a quotient f /g, we have w(f /g) = w(f ) − w(g). Now, all irreducible polynomials in C(z) are of the form p(z) = z − z0 ,

z0 ∈ C;

thus, if we normalise the valuation by assuming w0 = 1, then we will have w(r) = m > 0 for a rational function r if r has a zero of order m at z0 , w(r) = −m < 0 if r has a pole of order m at z0 , and w(r) = 0 otherwise. In case 2), let p by a polynomial of smallest degree with w(p) < 0. Since w(c) = 0 for all c ∈ C, p must have degree > 0, so that we can write p(z) = a0 z n + · · · + an ,

n ≥ 1, a0 = 0.

If n ≥ 2, we would have w a1 z n−1 + · · · + an ≥ 0,

w(z) ≥ 0,

since p is a polynomial of smallest degree with negative w, hence w(p) ≥ min w(a0 z n ), w(a1 z n−1 + · · · + an ) = min nw(z), w(a1 z n−1 + · · · + an ) ≥0 in contradiction to our choice of p. Hence p is again linear: p(z) = z − z0 ,

z0 ∈ C.

For any other linear polynomial q(z) = z − z1 = (z − z0 ) − (z1 − z0 ),

5.8 Algebraic Curves

we still have

249

w(q) = min w(p), w (z1 − z0 ) = w(p),

since w(z1 − z0 ) = 0 > w(p) (cf. the remark above). Thus we may again normalise w by assuming w(q) = −1 for all linear polynomials q, and then we will have w(f ) = −n for a polynomial f of degree n. We see therefore that in case 2) the valuation w gives the order of a zero or pole at ∞; it can be reduced to case 1) by a substitution 1 , ζ0 ∈ C. z= ζ − ζ0 Thus we have proved: Theorem 5.8.6 Let w be a non-trivial valuation of C(z); we may assume (without loss of generality) that w(p) = 1 for some p ∈ C(z). Then there exists a unique z0 ∈ C ∪ {∞} with w(r) = ordz0 r

(5.8.18)

for all r ∈ C(z).

Corollary 5.8.2 Let Σ be a compact Riemann surface, and w a non-trivial valuation of K(Σ) which is normalized in the sense that there exists some h ∈ K(Σ) with w(h) = 1. Then there exists a unique w0 ∈ Σ with w(f ) = ordw0 f

(5.8.19)

for all f ∈ K(Σ). Proof. For each f ∈ K(Σ), we have a (not necessarily normalised) valuation of C(z) induced by f : wf (r) := w(r ◦ f ),

r ∈ C(z).

(5.8.20)

Hence there exists zf ∈ C ∪ {∞} and a k (= kf ) ∈ N with wf = k ordzf r for all r ∈ C(z) (Theorem 5.8.6). We now choose an h ∈ K(Σ) with w(h) = 1; this is possible since w is normalised by assumption. Then clearly wh (r) = ord0 r for all r ∈ C(z).

(5.8.21)

250

5 Geometric Structures on Riemann Surfaces

By Theorem 5.8.1, every f in K(Σ) satisﬁes an equation f n + α1 (h)f n−1 + · · · + αn (h) = 0; this is because h is not a constant. Here, the αi are the elementary symmetric functions of f (w1 ), . . . , f (wn ), where w1 , . . . , wn are the inverse images by h (of a point of S 2 ). Hence nw(f ) ≥

min (ord0 αν + (n − ν)w(f )) .

ν=1,...,n

Thus, if w(f ) < 0, then at least one of the ord0 αν must be negative. And this means by the deﬁnition of the αν that f must have a pole at one of the zeros w10 , . . . , wn0 of h. If w(f ) > 0, then the above argument applied to 1/f shows that f must have a zero at one of the wi0 . Now choose (as in the proof of Theorem 5.8.2) a g ∈ K(Σ) which assumes distinct values at the wi0 . Then, as observed above (cf. (5.8.21)), there exists a unique zg (∈ S 2 ) such that wg (r) = k ordzg r. Hence there exists a unique λ ∈ {1, . . . , n} such that zg = g(wλ0 ). (observe that wg (z − zg ) = w(g − zg ) > 0, which means that g − zg vanishes at one of the wi0 as shown above.) It follows that, for any f ∈ K(Σ), w(f ) = 0 if and only if f has a zero or a pole at wλ0 . Thus it remains only to verify that w(f ) is indeed just the order of f at wλ0 . To do this, we choose an ∈ K(Σ) which has a simple zero at wλ0 . Since h(wλ0 ) = 0, we have 0 ≤ w(h/) = w(h) − w() = 1 − w(); since w() > 0, it follows that w() = 1. The above inequality now implies w(h/l) = 0, so that h has only a simple pole at wλ0 . Hence, if f ∈ K(Σ) has order k at wλ0 , then h−k · f has neither a pole nor a zero at wλ0 , i.e.

w(h−k · f ) = 0, so that w(f ) = k. As already mentioned, from the algebraic point of view one is dealing with a ﬁnitely generated extension-ﬁeld K of C of transcendence degree one. For a valuation w of K, Rw := {x ∈ K : w(x) ≥ 0} ∪ {0} is a subring of K; it is called the valuation ring of w. By the above considerations, Rw consists precisely of those meromorphic functions on the Riemann

5.8 Algebraic Curves

251

surface Σ determined by K, which are holomorphic in some neighborhood of the “place” w0 ∈ Σ determined by w (cf. Corollary 5.8.2). Further, Iw := {x ∈ K : w(x) > 0} ∪ {0}, consisting of the functions which have a zero at w0 , is the unique maximal ideal of Rw . Hence we can simply identify the place w0 deﬁned by the valuation w with Rw . We may therefore deﬁne an abstract non-singular curve as a ﬁnitely generated extension-ﬁeld K of C of transcendence degree one, together with the collection CK of all its valuation subrings Rw . This algebraic notion has the advantage that it can be greatly generalised: for example, we can replace C by an arbitrary algebraically closed ﬁeld k. Incidentally, this algebraic way of looking at a compact Riemann surface goes back to Dedekind and Weber. As an application of the above algebraic considerations, we prove in conclusion: Theorem 5.8.7 Let Σ1 , Σ2 be compact Riemann surfaces, and ϕ : K(Σ2 ) → K(Σ1 ) a homomorphism of ﬁelds whose restriction to C is the identity. Then there exists a unique holomorphic map h : Σ1 → Σ2 such that, for all z ∈ Σ1 and f ∈ K(Σ2 ), ϕ(f )(z) = f (h(z)). Proof.

(5.8.22)

For any z ∈ Σ1 , we deﬁne a valuation wz on K(Σ2 ) by wz (f ) = ordz ϕ(f ),

f ∈ K(Σ2 ).

By Corollary 5.8.2, there exists a unique h(z) ∈ Σ2 such that wz (f ) = ordh(z) f for all f ∈ K(Σ2 ). We must show that the map h : Σ1 → Σ2 thus deﬁned is holomorphic and satisﬁes (5.8.22); that a holomorphic h satisfying (5.8.22) is uniquely determined is obvious, since, for distinct p1 , p2 ∈ Σ2 , there exists g ∈ K(Σ2 ) with g(p1 ) = g(p2 ). We proceed to prove that h satisﬁes (5.8.22). Observe that, for any c ∈ C, ϕ(f )(z) − c = 0 ⇔ ordz (ϕ(f ) − c) > 0 ⇔ ordz ϕ(f − c) > 0 ⇔ ordh(z) (f − c) > 0 ⇔ f (h(z)) − c = 0. Thus (5.8.22) follows.

(since ϕ(c) = c) (by deﬁnition of h)

252

5 Geometric Structures on Riemann Surfaces

Suppose now that h is not continuous. Then, (since Σ2 is compact,) we will have a sequence (zn ) ∈ Σ1 such that zn → z0 ∈ Σ1 , and h(zn ) → p ∈ Σ2 , and (5.8.23) p = p0 := h(z0 ). But (5.8.22) shows that, for every g ∈ K(Σ2 ), g(p) = lim g (h (zn )) = lim ϕ(g) (zn ) n→∞

n→∞

= ϕ(g) (z0 ) = g (h (z0 )) = g (p0 ) , which is a contradiction since there exist g ∈ K(Σ2 ) with g(p) = g(p0 ). We have therefore proved that h is continuous. To prove that h is holomorphic, we choose for any z ∈ Σ1 an f ∈ K(Σ2 ) which is holomorphic and one-one in a neighborhood U of h(z). Then ϕ(f ) is not a constant (since ϕ as a homomorphism of ﬁelds is injective, and is the identity on C). We now choose a neighborhood V of z in Σ1 such that h(V ) ⊂ U (h is continuous), and ϕ(f )(V ) ⊂ f (U ) (note that ϕ(f )(z) = f (h(z)) by (5.8.22)). Then, again by (5.8.22), we have h(z ) = f −1 ◦ ϕ(f )(z ),

z ∈ V.

Hence h is holomorphic.

Exercises for § 5.8 1)

2)

3)

Study the hyperelliptic Riemann surface y 2 = (x − λ1 )(x − λ2 ) · · · (x − λ2p+1 ) with distinct λj . In particular, show that f = (x − λj )−1 has a pole of order two at x = λj , y = 0, and is otherwise regular (j = 1, . . . 2p + 1). Study the hyperelliptic Riemann surface y 2 = (x − λ1 )(x − λ2 ) · · · (x − λ2p+2 ) with distinct λj . As a special case, assume λj = 0 for j = 1, . . . 2p + 2 and λj+p+1 = λj for j = 1, . . . p + 1. In addition to the hyperelliptic involution (x, y) → (x, −y), we then also have the automorphism (x, y) → (−x, y). What are the ﬁxed points of this latter automorphism? (The answer depends on the parity of p.) Study the Riemann surface given by the equation y 3 = (x − λ1 )2 (x − λ2 ) · · · (x − λr ),

4)

where r ≥ 2, and λ1 , . . . , λr are distinct. Compute its genus (the answer will depend on whether r ≡ 2 mod 3 or not). Determine the number of ﬁxed points of the automorphism (x, y) → (x, e2πi/3 y). What is the genus of the Riemann surface deﬁned by the equation y 4 = x4 − 1?

5.9 Abel’s Theorem and the Jacobi Inversion Theorem

253

5.9 Abel’s Theorem and the Jacobi Inversion Theorem Let Σ be as before a compact Riemann surface of genus p, and α1 , . . . , αp a basis for H 0 (Σ, Ω 1 ). Let Λ ⊂ Cp be the associated period lattice, and J(Σ) = Cp /Λ the Jacobian variety of Σ (Deﬁnition 5.3.1). We have already seen (Lemma 5.4.1) that the degree of the divisor of a meromorphic function on Σ is always zero. The theorem below, due to Abel, gives a necessary and suﬃcient condition for a given divisor of degree zero to be the divisor of a meromorphic function. Theorem 5.9.1 (Abel) Let D be a divisor on Σ with deg(D) = 0; write D=

(zν − wν ),

(5.9.1)

ν

the zν , wν ∈ Σ not necessarily distinct. Then there exists a meromorphic function g on Σ with D = (g) if and only if ϕ(D) :=

ν

zν

α1 , . . . ,

wν

ν

zν

αp

≡ 0 mod Λ.

(5.9.2)

wν

Like the map j discussed in Section 5.3, ϕ is here a map ϕ : Div0 (Σ) → J(Σ), where Div0 (Σ) is the group of divisors of degree zero on Σ. Proof. If p = 0, then H 0 (Σ, Ω 1 ) = {0}, hence (5.9.2) is vacuous. Thus the assertion of the theorem reduces to the known result that, on the sphere, the zeros and poles of a rational function can be arbitrarily prescribed, subject only to the condition that the sum of the orders of the zeros be equal to the sum of the orders of the poles. We proceed to the case p ≥ 1, and ﬁrst prove the necessity of (5.9.2). Thus let D = (g), g ∈ K(Σ)\C. Consider the map ψ : P1 → J(Σ) [λ0 , λ1 ] → ϕ ((λ0 g + λ1 )) , where [λ0 , λ1 ] denotes the point of P1 with homogeneous co-ordinates (λ0 , λ1 ). Then ψ is continuous. Since P1 = S 2 is simply connected, ψ lifts (by Theorem 1.3.1) to a continuous map

254

5 Geometric Structures on Riemann Surfaces

ψ : P1 → Cp . Since the zeros and poles of λ0 g − λ1 depend holomorphically on [λ0 , λ1 ] (i.e. on λ0 /λ1 or λ1 /λ0 as the case may be), all the components of ψ are holomorphic functions, hence constant by the maximum principle (cf. Lemma 2.2.1). Hence ψ is also constant. It follows that ϕ(D) = ψ([0, 1]) = 0. Thus (5.9.2) is necessary. To prove the suﬃciency of (5.9.2), we need the following: Lemma 5.9.1 For any q1 , q2 , . . . , qn ∈ Σ and c1 , . . . , cn ∈ C\{0} with n c = 0, there exists a meromorphic form of the third kind on Σ which is i i=1 holomorphic except at the qi , and has a simple pole at each qi with residue ci . Remark.

The proof will use the same method as the proof of Lemma 5.4.3.

Proof. We ﬁrst consider a parameter disc D = {z : |z| < 1} in Σ, and suppose p, q ∈ {z : |z| < 12 }. In D\{p, q}, we have the holomorphic 1-form θ=

dz dz − . z−p z−q

Note that θ = d log

(5.9.3)

z−p , z−q

1 and log z−p z−q is single-valued in {z ∈ D : |z| > 2 }; hence θ is exact there. We now want to construct a holomorphic 1-form ω on Σ\{p, q} such that ω − θ is holomorphic in D; thus ω will be a diﬀerential of the third kind on Σ, with poles only at p and q, of residue +1 and −1 respectively. We choose a cut-oﬀ function η ∈ C0∞ (D, R) with

and 0 ≤ η ≤ 1, and set α(z) :=

η(z) = 1,

|z| ≤

1 2

η(z) = 0,

|z| ≥

3 4

d η(z) log 0,

z−p z−q

, z∈D z ∈ Σ\D

.

Then α(z) = θ(z) for |z| < 12 , and since θ is holomorphic in {|z| < 12 }\{p, q}, we have α(z) = −iα(z)

5.9 Abel’s Theorem and the Jacobi Inversion Theorem

255

there. Hence α(z) − i α(z) ≡ 0,

|z| < 12 .

In particular this form is C ∞ on all of Σ. We can therefore apply the orthogonal decomposition (5.2.16) to it: α − i α = ω0 + dg + df,

(5.9.4)

with ω0 ∈ H, df ∈ B , dg ∈ B. Since α − i α is C ∞ , so are f and g. Set µ := α − dg = i α + ω0 + df. Then µ (like α) is C ∞ on Σ\{p, q}. Also, dµ = dα − ddg = 0 since α is closed, and d µ = −idα + d ω0 − ddf = 0 since ω0 is harmonic. Thus µ is harmonic on Σ\{p, q}. Also, for |z| ≤ i α(z) = θ(z). Hence

1 2,

µ − θ = −dg = ω0 + df is C ∞ on Σ. Hence µ − θ, which is harmonic on D − {p, q} since µ and θ are, is actually harmonic in D. Hence β = 12 (µ + µ) is a real harmonic diﬀerential, singular like d log z−p z−q . Hence β + i β is a meromorphic diﬀerential with singularity d log z−p z−q . If now p and q do not lie in the same parameter-disc, we can choose p0 = p, p1 , . . . , pn = q in Σ such that each pair (pi−1 , pi ), i = 1, . . . , n, lies in such a disc. We can then construct meromorphic forms ωi on Σ as above, singular like d log ((z − pi−1 )/(z − pi )) in the respective coordinates. Keeping in mind that the order of a pole and the residue of a meromorphic form at a pole are independent of the choice of a local parameter at the pole, we see that ω :=

n

ωi

i=1

is a meromorphic form on Σ, holomorphic on Σ\{p, q}, with simple poles at p and q (of residues +1 and −1 respectively). We can now easily ﬁnish the proof of Lemma 5.9.1. Choose p ∈ Σ\{q1 , . . . , qn } and construct ωj as above for the pair qj and p. Now set ω :=

n

cj ωj .

(5.9.5)

j=1

Then p is no more a pole of ω, since cj = 0, and the only singularities of

ω are simple poles at the qj with residue cj .

256

5 Geometric Structures on Riemann Surfaces

We now proceed with the proof of the suﬃciency part of Theorem 5.9.1. Choose a canonical homology basis a1 , . . . , ap , b1 , . . . , bp for Σ which avoids all the zν , wν . By Lemma 5.9.1, there exists a diﬀerential of the third kind ω on Σ whose only poles are the zν , wν , with residues 1/2πi and −1/2πi respectively. 2 .) (If e.g. two of the zν coincide, at ζ ∈ Σ say, this means that Resζ ω = 2πi Since ω is unique up to forms of the ﬁrst kind, we can determine ω uniquely by requiring that ω = 0, 1 ≤ i ≤ p. (5.9.6) i = ai 0

1

(Recall that dim H (Σ, Ω ) = p.) Let now α1 , . . . , αp be the normalized basis of H 0 (Σ, Ω 1 ) with respect to the chosen canonical homology basis (cf. (5.3.20)). We wish to add an integral linear combination of the αi to ω so that all the bi -periods of the resulting form are also integers; this modiﬁcation of ω will of course preserve the residues, and the ai -periods will be integers. Since the i , 1 ≤ i ≤ p vanish and (α1 , . . . , αp ) is normalised, we have by the reciprocity law (5.3.16) zν wν ω = αi − αi (5.9.7) p+i = bi

=

ν

z0 zν

ν

wν

ν

z0

αi ,

where the paths of integration cν in the second line of (5.9.7) are suitably composed of the paths in the ﬁrst. Our assumption ϕ(D) ≡ 0 mod Λ means therefore that (p+1 , . . . , p+p ) ∈ Λ, i.e. there exists a closed path c in Σ, whose homology class can be written as p

mi , ni ∈ Z,

(mi ai + ni bi ),

(5.9.8)

i=1

such that p+i =

1 ≤ i ≤ p.

αi , c

Thus, if we set ω

:= ω −

p

nk αk ,

k=1

then ω

has ai -periods i = −ni ,

1 ≤ i ≤ p,

(5.9.9)

5.9 Abel’s Theorem and the Jacobi Inversion Theorem

257

while its bi -periods are p

p+i = p+i −

k=1 p

αi −

= c

αi −

= c

=

nk

p k=1

k=1 p

nk

αk bi

nk

αi

(Theorem 5.3.2)

bk

k=1

mk

αk bi

αi ak

= mi . Thus all the periods of ω

are integers, as desired. We can now set z ω

. g(z) := exp 2πi

(5.9.10)

z0

Then g is a well-deﬁned (nowhere-vanishing) holomorphic function on Σ ex are integers. And g is in fact merocept at the zν , wν , since the periods of ω morphic on Σ with divisor D = Σ(zν − wν ), since 1 d log = ω

2πi has residues +1 at the zν and −1 at the wν .

The essential idea of the above proof was that we converted the problem of the existence of a meromorphic function with prescribed zeros and poles to the problem of the existence of a diﬀerential of the third kind with prescribed residues (with sum zero); thus we have ﬁrst constructed ω

instead of g, and then deﬁned g by (5.9.10). The existence of ω

was proved using Lemma 5.9.1 and linear algebra (and the results of § 5.3). Corollary 5.9.1 Let ϕ : Div0 (Σ) → J(Σ) be the map deﬁned above. Then ϕ(D1 ) = ϕ(D2 ) if and only if D1 is linearly equivalent to D2 . In other words, if we let Pic0 be the group of line bundles of degree 0 (cf. Def.5.6.4) which by Theorem 5.6.1 is isomorphic to Div0 modulo linear equivalence, then we obtain an injective map ϕ˜ from Pic0 to J(Σ). Proof. If we note that ϕ is a homomorphism of abelian groups, this is merely a reformulation of Theorem 5.9.1.

We now want to show that conversely every point of J(Σ) is in the image of the above map ϕ; this is the so-called Jacobi Inversion Theorem.

258

5 Geometric Structures on Riemann Surfaces

Theorem 5.9.2 Let Σ be a compact Riemann surface of genus p, and z0 ∈ H 0 (Σ, Ω 1 ). Then, for every λ ∈ J(Σ), there Σ. Let α1 , . . . , αp be a basis of p exists an eﬀective divisor D = ν=1 zν on Σ with p ϕ (zν − z0 ) = λ, (5.9.11) ν=1

i.e. for every (λ1 , . . . , λp ) ∈ Cp , there exist z1 , . . . , zp ∈ Σ (not necessarily distinct), and paths cν from z0 to zν such that αj = λj , 1 ≤ j ≤ p. (5.9.12) ν

Proof.

cν

We consider the map ϕ (z1 , . . . , zp ) =

ν

zν

α1 , . . . ,

z0

ν

zν

αp .

z0

Thus ϕ is a map of Σ × · · · × Σ (p times) into J(Σ). We can compute the diﬀerential of ϕ : zµ zµ ∂ ∂ ∂ ϕ (z1 , . . . , zp ) = α1 , . . . , αp ∂zµ ∂zµ z0 ∂zµ z0 α αp 1 (zµ ), . . . , (zµ ) , = dz dz so that the Jacobian determinant of ϕ is ⎛ α1 ⎞ α1 dz (z1 ) . . . dz (zp ) ⎜ .. ⎟ . det ⎝ ... . ⎠ αp dz (z1 )

...

(5.9.13)

αp dz (zp )

(This should be compared to the similar expression in the proof of the Riemann-Roch theorem; as for the notation, the same letter z denotes a local coordinate at the various zµ , and dz the corresponding local 1-form.) Now we choose a point z1 ∈ Σ such that α1 (z1 ) = 0. By subtracting suitable multiples of α1 from α2 , . . . , αp , we may assume that αj (z1 ) = 0 for j > 1. Then we choose z2 ∈ Σ with α2 (z2 ) = 0, and again arrange as above that αj (z2 ) = 0 for j > 2, while αj (z1 ) continues to vanish for j > 1. After p such steps, we will have found (z1 , . . . , zp ) ∈ Σ × · · · × Σ at which the matrix in (5.9.13) will be an upper-triangular matrix with non-zero diagonal entries. Hence the Jacobian determinant of ϕ at (z1 , . . . , zp ) will be non-singular. Remark. The above argument also shows that, for a generic (eﬀective) divisor of degree p, h0 (K − D) = 0; for, as we saw during the proof of the Riemann-Roch theorem, h0 (K − D) = p − (the rank of the matrix in (5.9.13)).

5.9 Abel’s Theorem and the Jacobi Inversion Theorem

259

It follows from the implicit function theorem that ϕ maps a neighborhood of (z1 , . . . , zp ) (bijectively) onto a neighborhood V of Φ := ϕ (z1 , . . . , zp ).

= (λ1 , . . . , λp ) ∈ Cp be arbitrary. Then there exists n ∈ N such Now let λ that

λ Φ+ ∈V; n suppose

λ ϕ (w1 , . . . , wp ) = Φ + . n

= n(ϕ (w1 , . . . , wp ) − Φ), so we must ﬁnd (ζ1 , . . . , ζp ) ∈ Σ × · · · × Σ Thus λ such that (5.9.14) ϕ (ζ1 , . . . , ζp ) = n (ϕ (w1 , . . . , wp ) − Φ) . To do this, we consider the divisor

D =n

p

wν − n

ν=1

p

zν + pz0

ν=1

which has degree p. By Riemann-Roch, h0 (D ) = 1 + h0 (K − D ) ≥ 1 so that D is linearly equivalent to an eﬀective divisor D = (Theorem 5.9.1 or Corollary 5.9.1)

p

ν=1 ζν .

Hence

ϕ(D − pz0 ) = ϕ(D − pz0 ). Here ϕ(D − pz0 ) = ϕ (ζ1 , . . . , ζp ) by the deﬁnition of ϕ and ϕ . And p p ϕ(D − pz0 ) = nϕ (wν − z0 ) − (zν − z0 ) ν=1

ν=1

= n {ϕ (w1 , . . . , wp ) − Φ} by the homomorphism property of ϕ; thus (5.9.14) holds.

Exercises for § 5.9 1)

2)

Discuss the theorems of Abel and Jacobi in explicit terms for a Riemann surface of genus 1. In particular, deduce the case p = 1 of the Uniformization Theorem 4.4.1. Show that every divisor of degree ≥ p on a compact Riemann surface of genus p is linearly equivalent to an eﬀective divisor.

260

5 Geometric Structures on Riemann Surfaces

5.10 Elliptic Curves Deﬁnition 5.10.1 An elliptic curve is a compact Riemann surface of genus one. A surface of genus one is called elliptic because, as we shall soon see, it can be uniformised by elliptic integrals. We have come across elliptic curves several times already: in Chapter 2 especially as tori C/Λ, where Λ is a lattice in the complex plane, and again in the preceding sections as plane algebraic curves deﬁned by equations of the form λ ∈ C \ {0, 1} (5.10.1) y 2 = x(x − 1)(x − λ), (or y 2 z = x(x − z)(x − λz) in homogeneous coordinates). The aim of this section is to clarify the relations between these representations a little more precisely. We start out from a torus C/Λ, where the lattice Λ is generated by 1 and a point τ of the upper half-plane H, as described in § 2.6. Meromorphic functions on T = C/Λ correspond precisely to doubly periodic meromorphic functions on C with periods 1 and τ . We had seen in the proof of Theorem 5.7.1 that there exists on every elliptic curve a meromorphic function with a single pole of order two at an arbitrarily prescribed point. Now, on T , we can explicitly exhibit such a function: namely, (if we choose 0 as the pole,) the Weierstrass p-function 1 1 1 − 2 . p(z) := 2 + z (z − ω)2 ω ω∈Λ\{0}

The fact that this indeed converges uniformly on compact subsets of C \ Λ is proved e.g. in [A1]. The derivative 2 − p (z) = (z − ω)3 ω∈Λ

of p(z) is also a meromorphic function on T , and satisﬁes the equation p (z)2 = 4p(z)3 − g2 p(z) − g3

(5.10.2)

with

g2 = 60

ω −4 ,

ω∈Λ\{0}

g3 = 140

ω −6

ω∈Λ\{0}

(see [A1] for the calculations). The relation (5.10.2) is analogous to (5.7.37). The equation (5.10.2) is irreducible; it follows from Theorem 5.8.5 that p and

5.10 Elliptic Curves

261

p generate the ﬁeld of meromorphic functions on C/Λ; these meromorphic functions are also called elliptic functions. As in Theorem 5.7.1, it can be shown that z → (1, p(z), p (z))

(5.10.3)

deﬁnes an embedding of T = C/Λ in P2 . The image of T is then (by (5.10.2)) the plane algebraic curve deﬁned by the equation y 2 = 4x3 − g2 x − g3 .

(5.10.4)

As already discussed in § 5.7, we can bring (5.10.4) into the form y 2 = x(x − 1)(x − λ)

(5.10.5)

by a linear change of the variable x; computation shows 4 1/3 2 (λ − λ + 1), 3 1 (λ + 1)(2λ2 − 5λ + 2). g3 = 27 g2 =

We set ﬁnally ∆ := g23 − 27g32 = λ2 (λ − 1)2 .

(5.10.6)

Thus ∆ = 0 if and only if λ = 0, 1. On the other hand we have seen (§ 5.8) that λ = 0, 1 is also the condition for (5.10.5) to deﬁne a non-singular curve. Since we know by the Uniformization Theorem 4.4.1 that every compact Riemann surface of genus one can be represented as a torus C/Λ, we can state: Theorem 5.10.1 Suppose given λ ∈ C \ {0, 1} or equivalently g2 , g3 ∈ C with ∆ = g23 − 27g32 = 0. Then there exists a τ ∈ H for which the lattice Λ in C spanned by 1 and τ deﬁnes a torus C/Λ which is conformally equivalent to the plane algebraic curve deﬁned by (5.10.5) or (5.10.4) respectively. The conformal equivalence is deﬁned by (5.10.3). Let us look more closely at the inverse map of the conformal equivalence (5.10.3). Observe ﬁrst that z = 0 maps under (5.10.3) to (0, 0, 1). This point will also be called the point at inﬁnity in P2 of the curve (5.10.5). For every z0 ∈ C/Λ, we trivially have z0 z0 = dz (mod Λ), (5.10.7) 0

the integration being along any path from 0 to any point equivalent to z0 mod Λ, and the result being interpreted mod Λ.

262

5 Geometric Structures on Riemann Surfaces

Now dz =

dp(z) dx p (z)dz = = p (z) p (z) y

(5.10.8)

in the notation of (5.10.4). Set therefore

(x,y)

E(x) = ∞

dξ = η

x ∞

dξ 4ξ 3 − g2 ξ − g3

.

(5.10.9)

Here the ﬁrst integral is along a path in the algebraic curve deﬁned by (5.10.4); in the second integral, this curve is being regarded as a two-sheeted covering of the sphere, and the path of integration is a path in this covering. An integral of this form is called an elliptic integral. The value of the integral depends of course on the path of integration, and is determined only mod Λ by its end point. It is clear from (5.10.7)–(5.10.9) that the elliptic integral provides the inverse to the map (5.10.3). Thus: Theorem 5.10.2 An elliptic curve in the form (5.10.4) can be uniformised (i.e. mapped conformally onto a torus C/Λ) by means of elliptic integrals.

The fact that an elliptic curve Σ of the form (5.10.4) can be mapped conformally onto a torus C/Λ by means of the elliptic integral E can also be seen without using the uniformization theorem. For example, either from the Riemann-Hurwitz formula (as explained in § 5.8) or from the fact that dx y is a holomorphic form with no zeros on Σ, it follows that Σ has genus one, and that H 0 (Σ, Ω 1 ) is generated by dx y . Now, if we set π(γ) = γ

dx y

for any γ ∈ H1 (Σ, Z), there are many ways of seeing that Λ = π(H1 (Σ, Z)) is a lattice in C. And then it is clear that E deﬁnes a holomorphic map Σ → C/Λ which is bijective. Finally, the fact that any Riemann surface of genus one is conformally equivalent to a torus follows also from the Abel-Jacobi theorems. Indeed the map ϕ of Theorem 5.9.2 reduces in this case to the map z µ(z) = ω z0

of Σ to the one-dimensional torus J(Σ) = C/Λ, where ω is any holomorphic 1-form (≡ 0) on Σ; note that dimC H 0 (Σ, Ω 1 ) = 1. This map is holomorphic and surjective by Theorem 5.9.2, and injective by Abel’s theorem (Theorem 5.9.1): µ(z1 ) = µ(z2 ), z1 = z2 would imply that there would by a meromorphic function on Σ with divisor z1 − z2 , i.e. with just one simple pole, and this cannot happen except for Σ = S 2 .

5.10 Elliptic Curves

263

A torus C/Λ has a group structure in an obvious way, since it is the quotient of the additive group C by the discrete subgroup Λ. Therefore, as follows by the preceding considerations, every elliptic curve given in the form (5.10.4) or (5.10.5) carries a group structure. This is an interesting and deep fact, which we now wish to study more closely. We ﬁrst look at the point 0 ∈ C/Λ which is the identity element of the group structure; under the map (5.10.3), it corresponds to p0 = (0, 0, 1) ∈ P2 (the point at ∞ of the curve), which should now act as the identity of the group. Let now z1 , z2 , z3 be (not necessarily distinct) points of C/Λ, and p1 , p2 , p3 their images under the map (5.10.3). In order to avoid confusion in the notation for divisors, let us set z0 := 0. Consider now the divisor D = z1 + z2 + z3 − 3z0

(5.10.10)

= p1 + p2 + p3 − 3p0 By Abel’s theorem, D = (g) for a meromorphic function g : D = (g), if and only if z1 + z2 + z3 − 3z0 = 0 mod Λ ζ (since z0 dz = ζ − z0 on C), i.e. z1 + z2 + z3 = 0 mod Λ.

(5.10.11)

Then g will have a triple pole at p0 , and zeros at p1 , p2 , p3 . The important point here is that the addition in (5.10.11) is with respect to the group on C/Λ. We may thus write (instead of (5.10.11)) p1 + p2 = −p3 .

(5.10.12)

We shall now explain the geometric meaning of the fact that −(p1 + p2 ) is the third zero of the function with triple pole at p0 vanishing at p1 and p2 . As discussed in § 5.7, there is a unique line S in P2 joining p1 and p2 . Let its equation be g(x, y) := αx + βy + γ = 0. Restricting g(x, y) to our curve Σ, we obtain a meromorphic function g(z) := g(p(z), p (z)) on Σ. Then (assuming β = 0), g(z) is the (up to constant factors unique) meromorphic function on Σ with a triple pole at p0 and zeros at p1 and p2 . The third zero p3 of g(z) is thus the third point of intersection of S and Σ, and it must satisfy (5.10.12) by our earlier discussion. We can thus state: Theorem 5.10.3 In the group structure on the elliptic curve Σ given by (5.10.4), we will have p 1 + p2 + p3 = 0 if and only if p1 , p2 , p3 lie on a line in P2 , i.e. when p1 , p2 , p3 are collinear.

264

5 Geometric Structures on Riemann Surfaces

Fig. 5.10.1.

Our ﬁgure shows the group structure of (the real points of) the curve Σ deﬁned by (5.10.13) y 2 + y = x3 − x. The identity element is at inﬁnity. We denote the point (0, 0) by 1; it can be shown that this point generates the group of rational points of the curve, i.e. the subgroup consisting of points with rational coordinates. From 1, we obtain −1 from the relation 1 + 0 + (−1) = 0, i.e. −1 is the third point of intersection with Σ of the line joining 1 with 0. Since 0 has homogeneous coordinates (0,1,0), while 1 has homogeneous coordinates (0,0,1), this line is just the line x = 0, i.e. the y-axis. Hence −1 = (0, −1). To obtain 2 = 1 + 1, we can now use the relation −1 − 1 + 2 = 0.

5.10 Elliptic Curves

265

Thus the line determining 2 must have double intersection with Σ at −1 = (0, −1), i.e. is the tangent to Σ at −1. In this way one can easily construct more (rational) points of Σ. Let us also note that p1 , p2 , p3 ∈ Σ are collinear if and only if ⎛ ⎞ 1 p(z1 ) p (z1 ) det ⎝1 p(z2 ) p (z2 )⎠ = 0. (5.10.14) 1 p(z3 ) p (z3 ) Thus (5.10.14) is equivalent to z1 + z2 + z3 ≡ 0

mod Λ.

(5.10.15)

If we note further that p(z) is an even function, while p (z) is odd, so that p(z3 ) = p(−z1 − z2 ) = p(z1 + z2 ) p (z3 ) = p (−z1 − z2 ) = −p (z1 + z2 ) if (5.10.15) holds, we see that p(z1 + z2 ) and p (z1 + z2 ) can be expressed rationally in terms of p(z1 ), p(z2 ), p (z1 ) and p (z2 ). This is the famous addition theorem for elliptic functions. (We again point out that p and p generate the ﬁeld K(Σ) of meromorphic functions on Σ.) Finally, we shall express the group structure once more in terms of divisors. By Abel’s theorem, every divisor of degree one on an elliptic curve is linearly equivalent to precisely one eﬀective divisor z1 . If as before we ﬁx a z0 ∈ Σ, then every divisor of degree zero is thus linearly equivalent to precisely one divisor of the form z1 − z0 . Now the divisors of degree zero modulo linear equivalence form a group (as described in the beginning of § 5.4), and the map z1 → (z1 − z0 ) mod linear equivalence is an isomorphism of groups. For surfaces of higher genus, one has a similar homomorphism between the Jacobi variety J(Σ) and the group Div0 (Σ) of divisors on Σ of degree zero modulo linear equivalence (cf. Theorems 5.9.1 and 5.9.2).

Exercises for § 5.10 1)

2)

Describe in geometric and analytic terms what happens if for an elliptic curve y 2 = x(x − 1)(x − λ), λ tends 0, 1 or ∞. Take any elliptic curve (diﬀerent from (5.10.13)) and draw its real points and group law.

This page intentionally left blank

Sources and References

Chapter 1 contains some basic material from algebraic topology that can be found in most textbooks on that subject, e.g. in [Do]. Some of the material, adapted to suit the needs of Riemann surface theory, can also be found in [A2]. In Chapter 2, for the treatment of fundamental polygons, in particular Thm. 2.4.2, I ﬁrst consulted Nevanlinna’s book [N] on uniformisation. It seems to me, however that the treatment given there is not entirely complete in as much as it is not shown how to obtain a fundamental polygon with mutually equivalent corners (of the form given in Thm. 2.4.2). Section 2.6 is based on the work of Grauert-Reckziegel [GR] and Kobayashi [K]. A more recent book on hyperbolic geometry is [La]. References for the regularity theory for solutions of linear elliptic partial diﬀerential equations as developed in the ﬁrst part of Chapter 3 are [BJS], [GT], and [J5]. The theory of harmonic maps that forms the content of the second part of Chapter 3 is treated in more detail in my books [J1], [J3] where also many further results and references can be found. (The existence result for harmonic maps of Chapter 3 is a special case of more general results originally due to Al’ber [Al] and Eells-Sampson [ES], and to Lemaire [L] and SacksUhlenbeck [SU]. For a more abstract and conceptual treatment, we refer to [J2]. The uniqueness is a result of Al’ber [Al] and Hartman [Hm], while the diﬀeomorphism property was found by Sampson [Sa] and Schoen-Yau [SY]. The proof of Kneser’s theorem presented in § 3.10 was found by Eells-Wood [EW].) The approach to Teichm¨ uller theory presented in Chapter 4 is based on investigations of Wolf [W] and the author [J1]; in particular, the important asymptotic expansions (4.2.5) ﬀ. are due to Wolf. In [J1], the relation between harmonic maps and Teichm¨ uller theory is explored further, and the complex, metric, and K¨ ahlerian structures on Teichm¨ uller spaces are investigated. [Tr] presents a treatment of Teichm¨ uller theory from the point of view of global analysis. Our construction of Fenchel-Nielsen coordinates in § 4.3 is indirect as the existence proof for hyperbolic hexagons in Lemma 4.3.2 is not contructive. An explicit construction of such hexagons is presented in [LJ]. References for further study for the subject of § 4.3 are [T] and [Ab].

268

Sources and References

The uniformization theorem was found by Riemann although his proof was based on a version of Dirichlet’s principle that was ill-founded in his time. A proof of the uniformization theorem for compact Riemann surfaces was given by Poincar´e. A complete proof of the general uniformization theorem was ﬁrst found by Koebe. A proof using a method of Heins can be found in [A2]. Chapter 5 contains rather classical material; it can be found in textbooks on Riemann surfaces, e.g. the ones of Springer [Sp], Forster [F], and FarkasKra [FK] as well as in textbooks on algebraic geometry, e.g. the ones of Griﬃths-Harris [GH], Shafarevitch [S], Hartshorne [H] or Mumford [M]. The knowledgeable reader will realize that I have used the presentation contained in those textbooks in several places. In any case, this material has by now been reworked and presented so many times that it is diﬃcult to achieve any kind of originality here. For the treatment of ﬁelds with valuations, I have also consulted van der Waerden’s “Modern Algebra” [vW]. The construction of Sec. 5.5 is due to GrauertReckziegel [GR]. For a treatment of the diﬀerential geometric aspects of Riemann surfaces in more intrinsic terms, we recommend [EJ], [J3]. All necessary background material from analysis can be found in [J4].

Bibliography

[Ab]

Abikoﬀ, W., The real analytic theory of Teichm¨ uller space, Lecture Notes Math. 820, Springer, 1980 [Al] Al’ber, S.I., On n-dimensional problems in the calculus of variations in the large, Sov. Math. Dokl. 5 (1965), 700–704, and, Spaces of mappings into a manifold with negative curvature, Sov. Math. Dokl. 9 (1967), 6–9 [A1] Ahlfors, L., Complex Analysis, McGraw Hill, 1966 [A2] Ahlfors, L., Conformal invariants: Topics in geometric function theory, McGraw Hill, 1973 [BJS] Bers, L., John, F., and Schechter, M., Partial diﬀerential equations, New York, 1964 [Do] Dold, A., Lectures on algebraic topology, Springer, 1980 [EJ] Eschenburg, J., and Jost, J., Diﬀerentialgeometrie und Minimalﬂ¨ achen, Springer, 2006 [ES] Eells, J., and Sampson, J., Harmonic mappings of Riemannian manifolds, Am. J. Math. 85 (1964), 109–160 [EW] Eells, J., and Wood, J., Restrictions on harmonic maps of surfaces, Top. 15 (1976), 263–266 [F] Forster, O., Riemannsche Fl¨ achen, Springer, 1977 [FK] Farkas, H., and Kra, I., Riemann surfaces, Springer, 1980 [GH] Griﬃths, P., and Harris, J., Algebraic geometry, Wiley-Interscience, 1978 [GR] Grauert, H., and Reckziegel, H., Hermitesche Metriken und normale Familien holomorpher Abbildungen, Math. Z 89, 108–125 (1965) [GT] Gilbarg, D., and Trudinger, N., Elliptic partial diﬀerential equations, Springer, 2 1984 [H] Hartshorne, R., Algebraic geometry, Springer 1977 [Hm] Hartman, P., On homotopic harmonic maps, Can. J. Math. 19 (1967), 673–687 [Hv] Harvey, W. (Ed.), Discrete groups and automorphic functions, Academic Press, 1977 [J1] Jost, J., Two-dimensional geometric variational problems, WileyInterscience, 1991 [J1] Jost, J., Nonpositive curvature: Geometric and analytic aspects, Birkh¨ auser, 1997 [J3] Jost, J., Riemannian geometry and geometric analysis, Springer, 4 2005 [J4] Jost, J., Postmodern analysis, Springer, 3 2005 [J5] Jost, J., Partial diﬀerential equations, Springer, 2002 [J6] Jost, J., Bosonic strings: A mathematical treatment, AMS and International Press, 2001

270 [K] [L] [La] [LJ] [M] [N] [S] [Sa] [Si] [Sp] [SU] [SY] [T] [Tr] [vW] [W]

Bibliography Kobayashi, S., Hyperbolic manifolds and holomorphic mappings, M. Dekker, New York, 1970 Lemaire, L., Applications harmoniques de surfaces Riemanniennes, J. Diﬀ. Geom. 13 (1978), 51–78 Lang, S., Introduction to complex hyperbolic spaces, Springer, 1987 Li-Jost, X.Q., Hyperbolic hexagons, Preprint, MPI Math. in the Sciences, Leipzig, 2001 Mumford, D., Algebraic Geometry: I. Complex projective varieties, Springer, 1978 Nevanlinna, R., Uniformisierung, Springer, 1953 Shafarevich, I., Basic algebraic geometry, Springer, 1977 Sampson, J., Some properties and applications of harmonic mappings, Ann. Sci. Ec. Norm. Sup. II (1978), 211–228 Siegel, C.L., Topics in complex function theory, Wiley-Interscience, 1969 Springer, G., Riemann Surfaces, Chelsea, New York, 2 1981 Saks, J., and Uhlenbeck, K., The existence of minimal immersions of 2-spheres, Ann. Math. 113 (1981), 1–24 Schoen, R., and Yau, S.T., On univalent harmonic maps between surfaces, Inv. Math. 44 (1978), 265–278 Travaux de Thurston sur les surfaces, Ast´erisque 66-67, 1979 Tromba, A., Teichm¨ uller theory in Riemannian geometry, Birkh¨ auser, 1992 van der Waerden, B., Moderne Algebra I, Springer, 3 1950 Wolf, M., The Teichm¨ uller theory of harmonic maps, J. Diﬀ. Geom. 29 (1989), 449–479

Index of Notation

{Uα , fα }, 1 Sn, 2 f1 ≈ f2 , 3 g1 ≈ g2 , 3 {f }, 4 π1 (M, p0 ), 4 π1 (M ), 5 f∗ , 6 Gπ , 9

, 11 M N (G), 12 Gp,q , 13 H := {z = x + iy ∈ C, y > 0}, 14 log, 19 exp, 20 λ2 (z) dz dz, 20 ∂ , 20 ∂w ∂ , 20 ∂w (γ), 28, 34 (γ), 21 Area(B), 21 i dz dz, 21 2 d(z1 , z2 ), 21 ∂ , 21 ∂z ∂ , 21 ∂z ∆, 99 ∆, 21 SL(2, R), 25 PSL(2, R), 25 E(γ), 34 E(γ), 28 expp , 33 H/Γ , 39 diam (H/Γ ), 43 a1 b1 a1 b1 a2 b2 · · · ap bp ap bp , 47 χ, 59 vf (p), 62 dH (p, q), 66

GL(2, Z), 73 M1 , 75 T1 , 75 (· , ·), 79 F ⊥ , 80 L, 81 xn x, 82 L2 (Ω), 85 uh (x), 86 Lp (Ω), 87 up , 87 uLp (Ω) , 87 L∞ (Ω), 87 uL∞ (Ω) , 87 C k (Ω), 88 C 0 (Ω), 88 f C k (Ω) , 88 C0k (Ω), 88 supp f , 88 Di u, 91 W 1,2 (Ω), 92 (u, v)W 1,2 , 92 uW 1,2 , 92 H 1,2 (Ω), 92 H01,2 (Ω), 92 ∆hi u(x), 96 |Ω|, 97 (Vµ f )(x), 98 B(x, R), 98 G(x − y), 103 Γ (x − y), 105 C α (Ω), 110 C k,α (Ω), 110 f C k,α (Ω) , 110 C0k,α , 110 ⊂⊂, 110 E(u), 119

272

Index of Notation

W 1,2 (Σ1 , Σ2 ), 121 (Λ, g), 161 Mp , 161 (Λ, g, f ), 162 Tp , 162 ϕ(z) dz 2 , 162 Q(g), 162 u(g, γ), 163 q(g), 164 dω, 187 H j (M, R), 188 Hj (M, R), 188 Hj (M, G), 188 Hj (M, Z), 188 ηγ (z), 190 a · b, 192 P : H 1 (Σ, R) → R2p , 193 -operator, 196 (α1 , α2 ), 196 A2k , 196 d := − d, 197 h0 (Σ, Ω 1 ) := dimC H 0 (Σ, Ω 1 ), 203 J(Σ), 203 Cp /Λ, 203 j : Σ → J(Σ), 203 Resz0 η, 204 Div(Σ), 209 , 209 D ≥ D (g) := (ordzν g) zν ,, 209 (ordzν η) zν ., 209 (η) := L(D) := {g meromorphic function on Σ : g ≡ 0 or D + (g) ≥ 0}, 209

h0 (D) := dimC L(D), 209 |D| := {D ∈ Div(Σ) : D ≥ 0, D linearly equivalent to D}., 209 deg : Div(Σ) → Z, 210 M := {meromorphic functions on Σ}, 222 M∗ := M\{0} = {not identically vanishing meromorphic functions}, 222 M(U ) := {f |U : f ∈ M}, 222 M∗ (U ) := {f |U : f ∈ M∗ }, 222 O(U ) := {f ∈ M : f holomorphic on U }, 222 O∗ (U ) := {f ∈ O(U ) : f (z) = 0 for all z ∈ U }, 222 Pic(Σ), 224 [D], 224 c1 (L, λ2 ), 227 c1 (L), 227 c1 ([D]), 227 deg(L), 229 T Σ := [K]−1 , 230 Pd := [Z] : Z ∈ Cd+1 \{0}, Z ∼ λZ , 233 iK : Σ → Pp−1 , 234 imK : Σ → Pk−1 , 235 σν (z), 240 K(Σ), 245 C(z), 245 Rw , 250 p(z), 260

Index

Abel’s theorem, 253, 262, 265 addition theorem for elliptic functions, 265 adjoint, 197 Ahlfors-Schwarz lemma, 64, 66 algebraic curve, 243 algebraic equation, 240, 243, 244 algebraic function-ﬁeld, 246 algebraic space-curve, 244 analytic, 17 angle, 22 annulus, 72 anticonformal, 120 area, 21 Arzel` a-Ascoli theorem, 107 Ascoli-Arzel` a theorem, 168 atlas, 1, 17 Banach ﬁxed point theorem, 89 Banach space, 79 Banach-Saks theorem, 84 Bergman-metric, 220 biholomorphic, 25, 67 Bolyai, 31 boundary value problem, 99 branch point, 62 branched covering, 239 Brill-Noether reciprocity theorem, 220 canonical bundle, 230 canonical curve, 234 canonical divisor, 209, 210, 215, 230, 234 canonical homology basis, 193, 203, 206, 256 canonical map, 234, 236 chain, 188 change of coordinates, 22

chart, 1 Chern class, 227 closed, 187, 189, 190 co-closed, 197 co-exact, 198 cohomologous, 201 cohomology class, 62 commutator subgroup, 193 complete, 21, 27, 68, 72 complex manifold, 233 complex projective space, 233 complex structure, 195 complex torus, 203 conformal, 17, 19, 22, 120 conformal atlas, 17, 54 conformal factor, 22 conformal invariance, 17 conformal maps, 17 conformal Riemannian metric, 20, 23, 32, 230 conformal structure, 17, 66, 153, 155, 161 conformal structures on tori, 75 congruence subgroup, 77 conjugation operator, 196 contraction principle, 89 convex, 43, 136 coordinates, 1 Courant-Lebesgue lemma, 125 covariant Hessian, 136 covering, 7, 8 covering transformation, 11, 19 curvature, 22, 27, 28, 57, 62, 64, 66, 72, 140, 144, 184, 220, 222, 230 curve, 3, 239 cycle, 188 de Rham cohomology group, 188, 195

274

Index

de Rham’s theorem, 195 degree, 62, 64, 148, 187 degree of a divisor, 210 degree of a line bundle, 229 Dehn twist, 183 derivative, 89 diﬀeomorphism, 2, 144, 151, 163, 183 diﬀerence quotient, 96 diﬀerentiable, 1 diﬀerentiable manifold, 1 diﬀerentiable structure, 1 diﬀerential form, 187 diﬀerential of the ﬁrst kind, 204 diﬀerential of the second kind, 204 diﬀerential of the third kind, 204, 254, 256, 257 dimension, 1 Dirichlet fundamental polygon, 43 Dirichlet integral, 100 Dirichlet principle, 99, 101, 122, 202 distance, 21 distance-decreasing, 67 divisor, 208, 222, 224, 226, 253, 265 dominate, 9 dual, 188, 190 edge, 31 eﬀective, 26, 209, 213, 225, 234, 258, 265 elementary symmetric function, 240 elliptic, 40, 235 elliptic curve, 260, 262 elliptic function, 261 elliptic geometry, 24, 30 embedding, 234, 236, 245 energy, 29, 120 energy functional, 29 energy integral, 119 entire holomorphic function, 70 equivalent coverings, 9 Euclidean algorithm, 247 Euclidean geometry, 30 Euclidean motions, 47 Euclidian metric, 22, 23 Euler characteristic, 57, 59, 62 exact, 187, 189, 190 exponential map, 33 extended complex plane, 18 exterior derivative, 187

exterior diﬀerential form, 187 exterior product of diﬀerential forms, 194 faithful, 26 Fenchel-Nielsen coordinates, 173, 179, 182 ﬁeld of meromorphic functions, 245, 246 ﬁeld of rational functions, 243, 247 ﬁrst Chern class, 227 ﬁrst Chern form, 227 ﬁrst cohomology group, 193 ﬁrst homology group, 192, 193 ﬁxed model, 162 ﬁxed point, 40 Fr´echet diﬀerentiable, 89 Frobenius’ theorem, 189 fundamental 2-form, 196 fundamental domain, 42, 45, 72 fundamental group, 4, 5, 53, 74, 193 fundamental polygon, 42, 47, 59, 205, 207 Gauss, 31, 153 Gauss-Bonnet formula, 57, 64, 148 Gauss-Bonnet theorem, 31, 61, 175, 231 genus, 57, 59, 161, 183, 192, 222, 234 geodesic, 29, 32, 34, 36, 42, 133, 141, 174 geodesic line, 28 geodesic polar coordinates, 34 geodesic polygon, 59 geodesic triangle, 59 glueing lemma, 179 great circles, 30 Green function, 109 Green’s identity, 103 group of transformation, 26 group structure of an elliptic curve, 263 harmonic, 17, 19, 70, 76, 99, 105, 106 harmonic 1-form, 198, 199, 202 harmonic conjugate, 20 harmonic function, 20, 101, 106, 107 harmonic map, 76, 123, 125, 143, 144, 148, 163, 184 Hausdorﬀ, 1 Hausdorﬀ property, 222

Index Hausdorﬀ space, 11 Hermitian metric, 227, 230 hexagon, 47 Hilbert space, 79, 92, 101, 196 H¨ older continuous, 110, 159 holomorphic, 17, 19, 24, 62 holomorphic 1-form, 198, 203, 204, 208, 219, 220, 230 holomorphic function, 17 holomorphic quadratic diﬀerential, 162, 163, 172, 184, 217, 220, 235 holomorphic section, 225 holomorphic tangent bundle, 230 homeomorphism, 2 homogeneous coordinates, 233, 244 homology group, 188 homotopic, 3, 74, 131, 162 homotopy, 8 homotopy class, 4 homotopy of curves, 3 hyperbolic, 40, 45 hyperbolic area, 58 hyperbolic geometry, 24, 30 hyperbolic hexagon, 176 hyperbolic metric, 23, 27, 29, 40, 57, 125, 134, 143, 161, 174 hyperbolic surface, 163 hyperbolic triangle, 57, 58 hyperelliptic, 235, 236, 252 hyperelliptic involution, 252 implicit function theorem, 89, 168, 259 integration by parts, 91 intersection, 191 intersection number, 192, 194 intersection pairing, 194 isometry, 22, 161 isometry group, 27 isomorphic line bundles, 224 isotropy group, 26 Jacobi Inversion Theorem, 257 Jacobi variety, 265 Jacobian variety, 203, 253 K¨ ahler form, 196 Klein, 243 Kneser, 151 Kobayashi-hyperbolic, 66

275

Laplace operator, 99, 156 Laplace-Beltrami operator, 21, 22, 197 lattice, 72, 203, 260, 261 Laurent expansion, 204, 237 length, 21, 27, 28, 34, 153 lift, 11 line bundle, 223, 225–227 linear transformation, 238 linearly equivalent, 209, 210, 215, 257, 265 Lipschitz continuous, 110 Lobaˇcevsky, 31 local diﬀeomorphism, 6 local form of a holomorphic function, 17 local homeomorphism, 6, 19 m-canonical form, 235 manifold, 1 marked torus, 76 marking, 162 mean value inequality, 109 mean value theorem, 103, 105, 111 measurement, 153 meromorphic, 72 meromorphic 1-form, 204, 209 meromorphic function, 17, 204, 209, 210, 234, 240, 243, 253, 257 meromorphic section, 225, 226 metric, 21, 26, 195, 220, 222 metric fundamental polygon, 43, 47 metric surface, 32, 36, 37 metric topology, 21 minimizing sequence, 100 modular group, 73 moduli space, 75, 161, 162 M¨ obius transformation, 24, 25, 27, 28, 45, 238 molliﬁcation, 86, 108 Montel’s theorem, 72 multiple of a divisor, 209 Newtonian potential, 118 non-Euclidean, 24 non-euclidean, 24 normal, 72 normal subgroup, 12 null-homologous, 190 null-homotopic, 5

276

Index

orbit, 39 order of ramiﬁcation, 62 orientable, 54, 191 orientation, 54 orthogonal, 80 orthogonal complement, 80 orthogonal decomposition, 199 orthogonal projection, 81 orthonormal sequence, 83 pair of pants, 173 parabolic, 40, 45 parallel, 30 parallelogram law, 80 parametrized proportionally to arclength, 29 path, 3 period, 72, 253 period matrix, 203, 207, 208 periods, 203, 205, 206 Picard group, 224 Picard theorem, 71 plane algebraic curve, 260, 261 plane curve, 244 Poincar´e duality, 194, 227 Poincar´e inequality, 97, 100, 101 Poincar´e lemma, 189 Poincar´e’s model, 24 Poisson equation, 101 polygon, 32 potential, 21, 27 principal divisor, 209 properly discontinuous, 39 properly discontinuously, 13 quotient topology, 39 ramiﬁcation point, 62 rational function, 240 reciprocity laws, 206 rectiﬁable, 17 rectiﬁable curve, 21 removable singularities, 17 residue, 204, 255, 257 Riemann, 242, 243 Riemann surface, 37, 40, 54, 155, 161, 183, 195, 222, 234, 242, 243 Riemann-Hurwitz formula, 62, 215, 220, 232, 239, 244, 245, 262

Riemann-Roch Theorem, 186 Riemann-Roch theorem, 162, 172, 211, 218, 219, 222, 229, 234, 258 Riemann surface, 17 Riemannian metric, 153 Riemann’s Bilinear Relations, 208 Riesz representation theorem, 81 scalar product, 79, 196 Schottky double, 186 Schwarz inequality, 79 Schwarz lemma, 24 secant, 239 second variation, 139, 141 Sheaf Theory, 16 simply connected, 20 simply-connected, 5, 7, 11, 19 smoothing, 86, 200 smoothing function, 86 Sobolev space, 91, 92, 94 sphere, 2, 28, 30 stability lemma, 102 stereographic projection, 18, 28 Stokes’ theorem, 189, 204 strong convergence, 84 strong maximum principle, 106, 150 subharmonic, 105, 137 subharmonic function, 17, 19 surface, 1, 17, 161, 190 symbol, 56, 57 symmetrisation, 99 tangent, 239 Teichm¨ uller, 162 Teichm¨ uller space, 75, 162, 173, 179, 183, 218 Teichm¨ uller theorem, 172 test-function, 91 The Riemann sphere, 18 theorem of Hodge, 202 theorem of Schwarz-Pick, 24 theorem of van Kampen, 193 three-circle domain, 173 topological classiﬁcation, 55 torsion class, 195 torus, 2, 13, 19, 31, 47, 60, 72, 152, 163, 260–262 transcendence degree, 246 transformation behaviour, 172, 187, 230

Index transformation group, 26, 39 transformation of local coordinates, 20 transition functions, 223, 227 transitive, 26 triangle, 31 triangle inequality, 79 triangulation, 31, 55 two-sided, 190 uniformization theorem, 60, 61, 183, 216, 222, 261 unimodular, 73, 194 universal cover, 184 universal covering, 11, 67 unramiﬁed, 64 valuation, 246, 249, 250 valuation ring, 250

277

vertex, 31 weak closure, 90 weak convergence, 82, 84 weak derivative, 91, 96 weak solution, 202 weakly diﬀerentiable, 91 weakly harmonic, 101, 103, 123 weakly harmonic map, 125, 134, 137, 138 weakly subharmonic, 109 Weierstrass p-function, 260 Weil-Petersson product, 172 Weyl, 243 Weyl’s lemma, 108, 200 Zariski topology, 222

Universitext Aguilar, M.; Gitler, S.; Prieto, C.: Algebraic Topology from a Homotopical Viewpoint Aksoy, A.; Khamsi, M. A.: Methods in Fixed Point Theory Alevras, D.; Padberg M. W.: Linear Optimization and Extensions Andersson, M.: Topics in Complex Analysis Aoki, M.: State Space Modeling of Time Series Arnold, V. I.: Lectures on Partial Diﬀerential Equations

B¨ ottcher, A; Silbermann, B.: Introduction to Large Truncated Toeplitz Matrices Boltyanski, V.; Martini, H.; Soltan, P. S.: Excursions into Combinatorial Geometry Boltyanskii, V. G.; Efremovich, V. A.: Intuitive Combinatorial Topology Bonnans, J. F.; Gilbert, J. C.; Lemar´ echal, C.; Sagastiz´ abal, C. A.: Numerical Optimization Booss, B.; Bleecker, D. D.: Topology and Analysis Borkar, V. S.: Probability Theory

Audin, M.: Geometry

Brunt B. van: The Calculus of Variations

Aupetit, B.: A Primer on Spectral Theory

B¨ uhlmann, H.; Gisler, A.: A Course in Credibility Theory and Its Applications

Bachem, A.; Kern, W.: Linear Programming Duality Bachmann, G.; Narici, L.; Beckenstein, E.: Fourier and Wavelet Analysis Badescu, L.: Algebraic Surfaces Balakrishnan, R.; Ranganathan, K.: A Textbook of Graph Theory Balser, W.: Formal Power Series and Linear Systems of Meromorphic Ordinary Diﬀerential Equations

Carleson, L.; Gamelin, T. W.: Complex Dynamics Cecil, T. E.: Lie Sphere Geometry: With Applications of Submanifolds Chae, S. B.: Lebesgue Integration Chandrasekharan, K.: Transform

Classical Fourier

Charlap, L. S.: Bieberbach Groups and Flat Manifolds

Bapat, R.B.: Linear Algebra and Linear Models

Chern, S.: Complex Manifolds without Potential Theory

Benedetti, R.; Petronio, C.: Lectures on Hyperbolic Geometry

Chorin, A. J.; Marsden, J. E.: Mathematical Introduction to Fluid Mechanics

Benth, F. E.: Option Theory with Stochastic Analysis

Cohn, H.: A Classical Invitation to Algebraic Numbers and Class Fields

Berberian, S. K.: Fundamentals of Real Analysis

Curtis, M. L.: Abstract Linear Algebra

Berger, M.: Geometry I, and II Bliedtner, J.; Hansen, W.: Potential Theory

Cyganowski, S.; Kloeden, P.; Ombach, J.: From Elementary Probability to Stochastic Diﬀerential Equations with MAPLE

Blowey, J. F.; Coleman, J. P.; Craig, A. W. (Eds.): Theory and Numerics of Diﬀerential Equations

Dalen, D. van: Logic and Structure Da Prato: An Introduction to InfiniteDimensional Analysis

Blowey, J.; Craig, A.: Frontiers in Numerical Analysis. Durham 2004

Das, A.: The Special Theory of Relativity: A Mathematical Exposition

Blyth, T. S.: Lattices and Ordered Algebraic Structures

Debarre, O.: Higher-Dimensional Algebraic Geometry

B¨ orger, E.; Gr¨ adel, E.; Gurevich, Y.: The Classical Decision Problem

Deitmar, A.: A First Course in Harmonic Analysis

Curtis, M. L.: Matrix Groups

Demazure, M.: Bifurcations and Catastrophes

G˚ arding, L.; Tambour, T.: Algebra for Computer Science

Devlin, K. J.: Fundamentals of Contemporary Set Theory

Godbillon, C.: Dynamical Systems on Surfaces Godement, R.: Analysis I, and II Goldblatt, R.: Orthogonality and Spacetime Geometry Gouvˆ ea, F. Q.: p-Adic Numbers Gross, M. et al.: Calabi-Yau Manifolds and Related Geometries Gustafson, K. E.; Rao, D. K. M.: Numerical Range. The Field of Values of Linear Operators and Matrices Gustafson, S. J.; Sigal, I. M.: Mathematical Concepts of Quantum Mechanics Hahn, A. J.: Quadratic Algebras, Cliﬀord Algebras, and Arithmetic Witt Groups H´ ajek, P.; Havr´ anek, T.: Mechanizing Hypothesis Formation Heinonen, J.: Lectures on Analysis on Metric Spaces Hlawka, E.; Schoißengeier, J.; Taschner, R.: Geometric and Analytic Number Theory Holmgren, R. A.: A First Course in Discrete Dynamical Systems Howe, R., Tan, E. Ch.: Non-Abelian Harmonic Analysis Howes, N. R.: Modern Analysis and Topology Hsieh, P.-F.; Sibuya, Y. (Eds.): Basic Theory of Ordinary Diﬀerential Equations Humi, M., Miller, W.: Second Course in Ordinary Diﬀerential Equations for Scientists and Engineers Hurwitz, A.; Kritikos, N.: Lectures on Number Theory Huybrechts, D.: Complex Geometry: An Introduction Isaev, A.: Introduction to Mathematical Methods in Bioinformatics Istas, J.: Mathematical Modeling for the Life Sciences Iversen, B.: Cohomology of Sheaves Jacod, J.; Protter, P.: Probability Essentials Jennings, G. A.: Modern Geometry with Applications Jones, A.; Morris, S. A.; Pearson, K. R.: Abstract Algebra and Famous Inpossibilities

DiBenedetto, Equations

E.:

Degenerate

Parabolic

Diener, F.; Diener, M.(Eds.): Nonstandard Analysis in Practice Dimca, A.: Sheaves in Topology Dimca, A.: Singularities and Topology of Hypersurfaces DoCarmo, M. P.: Diﬀerential Forms and Applications Duistermaat, J. J.; Kolk, J. A. C.: Groups

Lie

Edwards, R. E.: A Formal Background to Higher Mathematics Ia, and Ib Edwards, R. E.: A Formal Background to Higher Mathematics IIa, and IIb Emery, M.: Stochastic Calculus in Manifolds Emmanouil, I.: Idempotent Matrices over Complex Group Algebras Endler, O.: Valuation Theory Erez, B.: Galois Modules in Arithmetic Everest, G.; Ward, T.: Heights of Polynomials and Entropy in Algebraic Dynamics Farenick, D. R.: Algebras of Linear Transformations Foulds, L. R.: Graph Theory Applications Franke, J.; H¨ ardle, W.; Hafner, C. M.: Statistics of Financial Markets: An Introduction Frauenthal, J. C.: Mathematical Modeling in Epidemiology Freitag, E.; Busam, R.: Complex Analysis Friedman, R.: Algebraic Surfaces and Holomorphic Vector Bundles Fuks, D. B.; Rokhlin, V. A.: Beginner’s Course in Topology Fuhrmann, P. A.: A Polynomial Approach to Linear Algebra Gallot, S.; Hulin, D.; Lafontaine, J.: Riemannian Geometry Gardiner, C. F.: A First Course in Group Theory

Jost, J.: Compact Riemann Surfaces Jost, J.: Dynamical Systems. Examples of Complex Behaviour Jost, J.: Postmodern Analysis Jost, J.: Riemannian Geometry and Geometric Analysis Kac, V.; Cheung, P.: Quantum Calculus Kannan, R.; Krueger, C. K.: Advanced Analysis on the Real Line Kelly, P.; Matthews, G.: Euclidean Hyperbolic Plane

The

Non-

Kempf, G.: Complex Abelian Varieties and Theta Functions Kitchens, B. P.: Symbolic Dynamics Kloeden, P.; Ombach, J.; Cyganowski, S.: From Elementary Probability to Stochastic Diﬀerential Equations with MAPLE Kloeden, P. E.; Platen; E.; Schurz, H.: Numerical Solution of SDE Through Computer Experiments

Mazzola, G.; Milmeister G.; Weissman J.: Comprehensive Mathematics for Computer Scientists 2 Mc Carthy, P. J.: Introduction to Arithmetical Functions McCrimmon, K.: A Taste of Jordan Algebras Meyer, R. M.: Essential Mathematics for Applied Field Meyer-Nieberg, P.: Banach Lattices Mikosch, T.: Non-Life Insurance Mathematics Mines, R.; Richman, F.; Ruitenburg, W.: A Course in Constructive Algebra Moise, E. E.: Introductory Problem Courses in Analysis and Topology Montesinos-Amilibia, J. M.: Classical Tessellations and Three Manifolds Morris, P.: Introduction to Game Theory

Kostrikin, A. I.: Introduction to Algebra

Nikulin, V. V.; Shafarevich, I. R.: Geometries and Groups

Krasnoselskii, M. A.; Pokrovskii, A. V.: Systems with Hysteresis

Oden, J. J.; Reddy, J. N.: Variational Methods in Theoretical Mechanics

Kou, H.-H.: Introduction to Stochastic Integration Kurzweil, H.; Stellmacher, B.: The Theory of Finite Groups. An Introduction

Øksendal, B.: Stochastic Diﬀerential Equations

Lang, S.: Introduction to Diﬀerentiable Manifolds

Poizat, B.: A Course in Model Theory

Lorenz. F.: Algebra I: Fields and Galois Theory

Porter, J. R.; Woods, R. G.: Extensions and Absolutes of Hausdorﬀ Spaces

Luecking, D. H., Rubel, L. A.: Complex Analysis. A Functional Analysis Approach Ma, Zhi-Ming; Roeckner, M.: Introduction to the Theory of (non-symmetric) Dirichlet Forms Mac Lane, S.; Moerdijk, I.: Sheaves in Geometry and Logic Marcus, D. A.: Number Fields

Radjavi, H.; Rosenthal, P.: Simultaneous Triangularization

Martinez, A.: An Introduction to Semiclassical and Microlocal Analysis

Rey, W. J. J.: Introduction to Robust and Quasi-Robust Statistical Methods

Matouˇsek, J.: Using the Borsuk-Ulam Theorem

Ribenboim, P.: Classical Theory of Algebraic Numbers

Matsuki, K.: Introduction to the Mori Program

Rickart, C. E.: Natural Function Algebras

Mazzola, G.; Milmeister G.; Weissman J.: Comprehensive Mathematics for Computer Scientists 1

Rotman, J. J.: Galois Theory

Øksendal, B.; Sulem, A.: Applied Stochastic Control of Jump Diﬀusions Polster, B.: A Geometrical Picture Book

Ramsay, A.; Richtmeyer, R. D.: Introduction to Hyperbolic Geometry Rees, E. G.: Notes on Geometry Reisel, R. B.: Elementary Theory of Metric Spaces

Roger G.: Analysis II Rubel, L. A.: Entire and Meromorphic Functions

Ruiz-Tolosa, J. R.; Castillo E.: From Vectors to Tensors Runde, V.: A Taste of Topology Rybakowski, K. P.: The Homotopy Index and Partial Diﬀerential Equations Sagan, H.: Space-Filling Curves Samelson, H.: Notes on Lie Algebras Schiﬀ, J. L.: Normal Families Sengupta, J. K.: Optimal Decisions under Uncertainty S´ eroul, R.: Programming for Mathematicians

Stillwell, J.: Geometry of Surfaces Stroock, D. W.: An Introduction to the Theory of Large Deviations Sunder, V. S.: An Invitation to von Neumann Algebras ´ Tamme, G.: Introduction to Etale Cohomology Tondeur, P.: Foliations on Riemannian Manifolds Toth, G.: Finite M¨ obius Groups, Minimal Immersions of Spheres, and Moduli Verhulst, F.: Nonlinear Diﬀerential Equations and Dynamical Systems

Seydel, R.: Tools for Computational Finance

Weintraub, S. H.: Galois Theory

Shafarevich, I. R.: Discourses on Algebra

Wong, M. W.: Weyl Transforms

Shapiro, J. H.: Composition Operators and Classical Function Theory

Xamb´ o-Descamps, S.: Block Error-Correcting Codes

Simonnet, M.: Measures and Probabilities

Zaanen, A.C.: Continuity, Integration and Fourier Theory

Smith, K. E.; Kahanp¨ aa ¨, L.; Kek¨ al¨ ainen, P.; Traves, W.: An Invitation to Algebraic Geometry

Zhang, F.: Matrix Theory Zong, C.: Sphere Packings

Smith, K. T.: Power Series from a Computational Point of View

Zong, C.: Strange Phenomena in Convex and Discrete Geometry

Smory´ nski, C.: Logical Number Theory I. An Introduction

Zorich, V. A.: Mathematical Analysis I

Stichtenoth, H.: Algebraic Function Fields and Codes

Zorich, V. A.: Mathematical Analysis II

Compact Riemann Surfaces: An Introduction to Contemporary Mathematics

Read more

Compact Riemann Surfaces: An Introduction to Contemporary Mathematics

Read more

An Introduction to Riemann Surfaces

Read more

Compact Riemann surfaces

Read more

Symmetries of compact Riemann surfaces

Read more

Introduction to Compact Riemann Surfaces and Dessins d'Enfants

Read more

Riemann Surfaces (Mathematics Series)

Read more

Geometry and spectra of compact riemann surfaces

Read more

Symmetries of Compact Riemann Surfaces (Lecture Notes in Mathematics 2007)

Read more

Compact Riemann Surfaces (Lectures in Mathematics. ETH Zurich)

Read more

Geometry and Spectra of Compact Riemann Surfaces (Progress in Mathematics)

Read more

Function theory on compact Riemann surfaces

Read more

Riemann surfaces

Read more

Riemann surfaces

Read more

Riemann Surfaces

Read more

An Introduction to Manifolds (Universitext)

Read more

An introduction to Riemann surfaces, algebraic curves and moduli spaces

Read more

Riemann Surfaces

Read more

An introduction to Lorentz surfaces

Read more

Computational Approach to Riemann Surfaces

Read more

An introduction to African politics, 3rd edition

Read more

Cryptography: An Introduction (3rd edition)

Read more

Computational approach to Riemann surfaces

Read more

Optoelectronics: An Introduction (3rd Edition)

Read more

Crystallography: An Introduction, 3rd Edition

Read more

Riemann Surfaces (Graduate Texts in Mathematics)

Read more

Riemann Surfaces (Graduate Texts in Mathematics)

Read more

Riemann Surfaces (Graduate Texts in Mathematics 71)

Read more

An Introduction to Mathematics

Read more

Postmodern Analysis, 3rd Edition (Universitext)

Read more

Recommend Documents

Compact Riemann Surfaces: An Introduction to Contemporary Mathematics

Jürgen Jost C omp act Riemann S urfaces An Introduction to Contemporary Mathematics Third Edition With 23 Figures 123...

Compact Riemann Surfaces: An Introduction to Contemporary Mathematics

Jürgen Jost C omp act Riemann S urfaces An Introduction to Contemporary Mathematics Third Edition With 23 Figures 123...

An Introduction to Riemann Surfaces

Cornerstones Series Editors Charles L. Epstein, University of Pennsylvania, Philadelphia, PA, USA Steven G. Krantz, Was...

Compact Riemann surfaces

Differentialgeometrie III Compact Riemann Surfaces Prof. Dr. Alexander Bobenko CONTENTS 1 Contents 1 Definition of ...

Symmetries of compact Riemann surfaces

Lecture Notes in Mathematics Editors: J.-M. Morel, Cachan F. Takens, Groningen B. Teissier, Paris 2007 Emilio Bujala...

Introduction to Compact Riemann Surfaces and Dessins d'Enfants

LONDON MATHEMATICAL SOCIETY STUDENT TEXTS Managing Editor Professor D. Benson, Department of Mathematics, University o...

Riemann Surfaces (Mathematics Series)

RIEMANN SURFACES BY LARS V. AHLFORS I'ROFEIIIOB OF MA'I'IIDIATICII BABVABD UNlVERS1TY AND LEO SARlO PROFESSOR OF MATHE...

Geometry and spectra of compact riemann surfaces

Symmetries of Compact Riemann Surfaces (Lecture Notes in Mathematics 2007)

Lecture Notes in Mathematics Editors: J.-M. Morel, Cachan F. Takens, Groningen B. Teissier, Paris 2007 Emilio Bujala...

Compact Riemann Surfaces (Lectures in Mathematics. ETH Zurich)

Lectures in Mathematics ETH Zurich Department of Mathematics Research Institute of Mathematics Managing Editor: Oscar E...