Advances in
Nuclear Science and Technology VOLUME 25
Advances in
Nuclear Science and Technology Series Editors
Jef...
41 downloads
1753 Views
12MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Advances in
Nuclear Science and Technology VOLUME 25
Advances in
Nuclear Science and Technology Series Editors
Jeffery Lewins Cambridge University, Cambridge, England
Martin Becker Oregon Graduate Institute of Science and Technology Portland, Oregon
Editorial Board
R. W. Albrecht Ernest J. Henley John D. McKean K. Oshima A. Sesonske H. B. Smets C. P. L. Zaleski
A Continuation Order Plan is available for this series. A continuation order will bring delivery of each new volume immediately upon publication. Volumes are billed only upon actual shipment. For further information please contact the publisher.
Advances in
Nuclear Science and Technology VOLUME 25
Edited by
Jeffery Lewins Cambridge University Cambridge, England
and
Martin Becker Oregon Graduate Institute of Science and Technology Portland, Oregon
KLUWER ACADEMIC PUBLISHERS NEW YORK, BOSTON, DORDRECHT, LONDON, MOSCOW
eBook ISBN: Print ISBN:
0-306-47812-9 0-306-45604-4
©2002 Kluwer Academic Publishers New York, Boston, Dordrecht, London, Moscow Print ©1997 Kluwer Academic/Plenum Publishers New York All rights reserved No part of this eBook may be reproduced or transmitted in any form or by any means, electronic, mechanical, recording, or otherwise, without written consent from the Publisher Created in the United States of America Visit Kluwer Online at: and Kluwer's eBookstore at:
http://kluweronline.com http://ebooks.kluweronline.com
PREFACE
The present review volume not only covers a wide range of topics pertinent to nuclear science and technology, but has attracted a distinguished international authorship, for which the editors are grateful. The opening review by Drs. Janet Tawn and Richard Wakeford addresses the difficult matter of questioning scientific hypotheses in a court of law. The United Kingdom experienced a substantial nuclear accident in the 1950s in the form of the Windscale Pile fire. This in itself had both good and bad consequences; the setting up of a licensing authority to ensure nuclear safety was one, the understandable public sentiment concerning nuclear power (despite the fire occurring in a weapons pile) the other. Windscale today is subsumed in the reprocessing plant at Sellafield operated by British Nuclear Fuels plc and it was inevitable perhaps that when an excess cluster of childhood leukaemia was observed in the nearby village of Seascale that public concern should be promoted by the media, leading to the hearing of a claim of compensation brought on behalf of two of the families of BNFLs workers who had suffered that loss. The review article demonstrates the complexity of understanding such a claim against the statistical fluctuations inherent and shows how the courts were persuaded of the need to propose a biological mechanism if responsibility were to be held. The Company were undoubtedly relieved by the finding. At the same time, the concerns raised led to a deeper understanding of such matters which our authors summarise admirably. An analogous technique involving stochastic modelling, better known to our readers perhaps as the Monte Carlo method, is shown in the next chapter to be usefully applied to the problem of determining parameters for elementary reactor dynamics equations. From the United States, Tim Valentine, however, shows that this view is unnecessarily limited; the Monte Carlo simulation can be used more directly to evaluate time-dependent development in nuclear reactors of considerable (and therefore realistic) complexity. It makes particular sense in extracting cross-spectral data for noise analysis, as the author shows. Chapter 4 is also from a United Kingdom author. It may have a further link to the first through the word “gene” but Jonathan Carter actually takes us through the biological analogy of the genetic optimisation algorithm that has proved successful in optimising reactor cores. It might be recollected that despite the characterisation of nuclear power as capital intensive, running cost cheap, nevertheless as much money is committed in the plant lifetime to supply the fuel as is spent on the original construction. Improvements in the specification of reload cores can then provide dramatic returns. The genetic algorithm has proved a powerful way to optimise the highly constrained and very large, non-linear problem that emerges. The techniques, including new developments reviewed here, have application to a wide range of problems, such as oil-well diagnostics. Perhaps the most exciting is the “tabu” algorithm that might with advantage be made known to a wider audience therefore than the nuclear community. v
vi
PREFACE
Professor Marseguerra, our Italian expert, furthers the dynamic understanding of reactor systems by reviewing the foundations of wavelet analysis. Fourier analysis and Fourier transformation have not only great practical strength in applications but have led to a deep understanding of functional analysis—readers may recollect that Fourier himself was denied the Gold Medal in three successive competitions before the deep significance of his work was appreciated, so remarkable a development it was. There can be little doubt that wavelet analysis provides a powerful technique which will be of value to the professional nuclear engineer; our Italian author can be thanked for offering just such an interpretation. From Belgium in our next article, but by an author again of international standing, Professor Devooght brings us a further stochastic study, the application of Monte Carlo simulation to the study of system reliability. The review shows clearly why the Monte Carlo method is efficient in solving complex problems and takes us further into the problem of employing variational-adjoints and other methods to promote accuracy in the face of rare events. Our author provides a signpost to modern studies of dynamic reliability that can be expected to provide more realistic estimates of the hazards of a real and changing world. The TMI accident and the Chernobyl accident emphasised the central significance of both the plant operators and the control room. Modern computers should make it easier for the operators to function, routinely, in accident conditions—and not overlooking the need for improved production efficiency. But to do this requires a blend of hardware, software, and knowledge of human behaviour. A jointly authored review of the problems in computerising control rooms is provided by Dr. Sun, from the US, and his colleague Dr. Kossilov (formerly of the IAEA), both acknowledged experts in this area combining electronic-digital technology with ergonomics. The clew of this volume, however, returns to matters arising from Chernobyl itself, the nuclear accident of epic proportions that has had such wide implications. But although much of the world may be concerned with the public image of nuclear power in the aftermath of the 1986 accident, in Russia, Ukraine, and Byelorussia (Belarus), there is an immediate, substantial, and very practical problem. Our Russian authors from the Kurchatov Institute provide an account of the consequences of Chernobyl that many will find profoundly moving in the wholesale involvement of so many workers in the clean-up process and the specification of the difficulties yet to be overcome. To compare these problems with those facing colleagues in the rest of the world is sobering indeed. As the Christian millennium looms larger, it is right to seek a balanced view of nuclear power. Clearly France and many Far Eastern countries hold to a continuing dependence, in some cases enlargement, on nuclear power to produce electricity. The stations must be operated safely; the processing industry must be operated efficiently; and above all politicians must come to grips with questions of disposal versus waste storage. But at the same time, burgeoning concerns over thermal warming and the need to contain carbon-dioxide release and the finite supply of fossil fuels, are just examples of the reassessment that may yet see the
vii
next century accept a balanced programme of nuclear power. Much depends on a demonstration of renewed confidence by the United States of America. We hope to keep our readers not only abreast of the changes but to contribute to their ability to bring them about. For this, as always, we thank our distinguished authors for their timely contribution. Jeffery Lewins Martin Becker
CONTENTS
Childhood Leukaemia and Radiation: The Sellafield Judgment E. Janet Tawn and Richard Wakeford 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
Introduction Childhood Leukaemia around Nuclear Installations The Gardner Report The Legal Cases The Nature of Epidemiology Background to the Gardner Hypothesis and Subsequent Findings Radiation Genetic Risk Genetic Risk from Sellafield Occupational Radiation Exposure Heritability of Leukaemia Etiology and Heterogeneity of Cases Animal Studies Dose Rate Effects Unconventional Genetic Mechanisms The Legal Judgment and Aftermath
1 2 4 5 7 9 13 14 15 17 18 18 19 20
References
22
Reactor Dynamics from Monte Carlo Calculations Timothy E. Valentine 1. 2. 3. 4. 5. 6. 7.
Introduction Review of Statistics of Stochastic Processes Reactor Transfer Functions Time Delay Estimation Monte Carlo Simulation Application to the Advanced Neutron Source Reactor Summary
31 32 34 38 39 43 51
References
51
Notes on a Simplified Tour: From the Fourier to the Wavelet Transform Marzio Marseguerra 1. 2. 3. 4. 5. 6.
Introduction Preliminaries The Continuous Windowed Fourier Transform Frames The Continuous Wavelet Transform The Discrete Windowed Fourier Transform The Discrete Wavelet Transform
53 54 58 65 69 74 78
ix
x
CONTENTS
7. The Multiresolution Analysis 8. Sub-Band Filtering 9. Conclusions
References
81 103 111 112
Genetic Algorithms for Incore Fuel Management and Other Recent Developments in Optimisation Jonathan N. Carter 1. 2. 3. 4. 5.
Introduction Optimisation Problems Optimisation Algorithms for Combinatorial Optimisation Optimisation Methods for Continuum Problems Conclusions
113 113 121 144 147
References
149
Appendix: Gray Coding
153
The Computerization of Nuclear Power Plant Control Rooms Bill K.H. Sun and Andrei N. Kossilov 1. 2. 3. 4. 5. 6. 7.
Introduction Human-Machine Interface Computerization in Nuclear Power Plant Control Rooms Safety and Licensing Implementation and Maintenance Issues Future Trends Conclusions
155 156 158 163 165 167 168
References
169
Consequences of Chernobyl: A View Ten Years on A. Borovoi and S. Bogatov 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Introduction The Accident Area Pollution Creation of the Sarcophagus: Its Advantages and Shortcomings Research Activities Associated with the Sarcophagus What is the Threat from the Sarcophagus? Necessity and Strategy for the Transformation of the Sarcophagus Remediation of Contaminated Areas Medical Consequences: Residence in the Contaminated Areas Conclusion
171 172 182 190 191 192 199 200 203 211
References
212
CONTENTS
xi
Dynamic Reliability Jacques Devooght Introduction Physical Setting The Chapman-Kolmogorov Equations Reduced Forms Exit Problems Semi-Markovian Generalization Subdynamics Application to Event Trees Semi Numerical Methods The Monte Carlo Method Examples of Numerical Treatment of Problems of Dynamic Reliability 12. Conclusions
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
References INDEX
215 216 218 222 227 230 233 236 242 245 261 272 274 279
CONTENTS OF EARLIER VOLUMES1
CONTENTS OF VOLUME 10
Optimal Control Applications in Nuclear Reactor Design and Operations, W. B. Terney and D. C. Wade Extrapolation Lengths in Pulsed Neutron Diffusion Measurements, N. J. Sjsötrand Thermodynamic Developments, R. V. Hesketh Kinetics of Nuclear Systems: Solution Methods for the Space-Time Dependent Neutron Diffusion Equation, W. Werner Review of Existing Codes for Loss-of-Coolant Accident Analysis, Stanislav Fabic CONTENTS OF VOLUME 11
Nuclear Physics Data for Reactor Kinetics, J. Walker and D. R. Weaver The Analysis of Reactor Noise: Measuring Statistical Fluctuations in Nuclear Systems, N. Pacilio, A. Colombina, R. Mosiello, F. Morelli and V. M. Jorio On-Line Computers in Nuclear Power Plants—A Review, M. W. Jervis Fuel for the SGHWR, D. O. Pickman, J. H. Gittus and K. M. Rose The Nuclear Safety Research Reactor (NSSR) in Japan, M. Ishikawa and T. Inabe Practical Usage of Plutonium in Power Reactor Systems, K. H. Peuchl Computer Assisted Learning in Nuclear Engineering, P. R. Smith Nuclear Energy Center, M. J. McKelly CONTENTS OF VOLUME 12
Characteristic Ray Solutions of the Transport Equation, H. D. Brough and C. T. Chandler Heterogeneous Core Design for Liquid Metal Fast Breeder Reactors, P. W. Dickson and R. A. Doncals Liner Insulation for Gas Cooled Reactors, B. N. Furber and J. Davidson Outage Trends in Light Water Reactors, E. T. Burns, R. R. Pullwood and R. C. Erdman Synergetic Nuclear Energy Systems Concepts, A. A. Harms 1
Volumes 1–9 of the series were published by Academic Press.
xiii
xiv
CONTENTS OF EARLIER VOLUMES
Vapor Explosion Phenomena with Respect to Nuclear Reactor Safety Assessment, A. W. Cronenberg and R. Benz CONTENTS OF VOLUME 13
Radioactive Waste Disposal, Horst Böhm and Klaus Kühn Response Matrix Methods, Sten-Oran Linkahe and Z. J. Weiss Finite Approximations to the Even-Parity Transport Equation, E. E. Lewis Advances in two-Phase Flow Instrumentation, R. T. Lahey and S. Benerjee Bayesian Methods in Risk Assessment, George Apostolakis CONTENTS OF VOLUME 14
Introduction: Sensitivity and Uncertainty Analysis of Reactor Performance Parameters, C. R. Weisben Uncertainty in the Nuclear Data used for Reactor Calculations, R. W. Peeble Calculational Methodology and Associated Uncertainties, E. Kujawski and C. R. Weisben Integral Experiment Information for Fast Reactors, P. J. Collins Sensitivity Functions for Uncertainty Analysis, Ehud Greenspan Combination of Differential and Integral Data, J. H. Marable, C. P. Weisbin and G. de Saussure New Developments in Sensitivity Theory, Ehud Greenspan CONTENTS OF VOLUME 15
Eigenvalue Problems for the Boltzmann Operator, V. Protopopescu The Definition and Computation of Average Neutron Lifetimes, Allen F. Henry Non-Linear Stochastic Theory, K. Saito Fusion Reactor Development: A Review, Weston M. Stacey, Jr. Streaming in Lattices, Ely M. Gelbard CONTENTS OF VOLUME 16
Electrical Insulation and Fusion Reactors, H. M. Bamford Human Factors of CRT Displays for Nuclear Power Plant Control, M. M. Danchak Nuclear Pumped Lasers, R. T. Schneider and F. Hohl Fusion-Fission Hybrid Reactors, E. Greenspan Radiation Protection Standards: Their Development and Current Status, G. C. Roberts and G. N. Kelly
CONTENTS OF EARLIER VOLUMES
xv
CONTENTS OF VOLUME 17
A Methodology for the Design of Plant Analysers, T. H. E. Chambers and M. J. Whitmarsh- Everies Models and Simulation in Nuclear Power Station Design and Operation, M. W. Jervis Psychological Aspects of Simulation Design and Use, R. B. Stammers The Development of Full-Scope AGR Training Simulators within the C. E. G. B., C. R. Budd Parallel Processing for Nuclear Safety Simulation, A. Y. Allidina, M. C. Singh and B. Daniels Developments in Full-Scope, Real-Time Nuclear Plant Simulators, J. Wiltshire CONTENTS OF VOLUME 18
Realistic Assessment of Postulated Accidents at Light Water Reactor Nuclear Power Plants, E. A. Warman Radioactive Source Term for Light Water Reactors, J. P. Hosemann and K. Hassman Multidimensional Two-Phase Flow Modelling and Simulation, M. Arai and N. Hirata Fast Breeder Reactors—The Point of View of French Safety Authorities, M. Laverie and M. Avenas Light Water Reactor Space-Dependent Core Dynamics Computer Programs, D. J. Diamond and M. Todosow CONTENTS OF VOLUME 19
Festschrift to Eugene Wigner Eugene Wigner and Nuclear Energy, A. M. Weinberg The PIUS Principle and the SECURE Reactor Concepts, Kåre Hannerz PRISM: An Innovative Inherently Safe Modular Sodium Cooled Breeder Reactor, P. H. Pluta, R. E. Tippets, R. E. Murata, C. E. Boardman, C. S. Schatmeier, A. E. Dubberley, D. M. Switick and W. Ewant Generalized Perturbation Theory (GPT) Methods; A Heuristic Approach, Augusto Gandini Some Recent Developments in Finite Element Methods for Neutron Transport, R. T. Ackroyd, J. K. Fletcher, A. J. H. Goddard, J. Issa, N. Riyait, M. M. R. Williams and J. Wood
xvi
CONTENTS OF EARLIER VOLUMES
CONTENTS OF VOLUME 20
The Three-Dimensional Time and Volume Averaged Conservation Equations of Two-Phase Flow, R. T. Lahey, Jr. , and D. A. Drew Light Water Reactor Fuel Cycle Optimisation: Theory versus Practice, Thomas J. Downar and Alexander Sesonske The Integral Fast Reactor, Charles E. Till and Yoon I. Chang Indoor Radon, Maurice A. Robkin and David Bodansky CONTENTS OF VOLUME 21
Nodal Methods in Transport Theory, Ahmed Badruzzaman Expert Systems and Their Use in Nuclear Power Plants, Robert E. Uhrig Health Effects of Low Level Radiation, Richard Doll and Sarah Darby Advances in Optimization and Their Applicability to Problems in the Field of Nuclear Science and Technology, Geoffrey T. Parks Radioactive Waste Storage and Disposal in the U. K., A. D. Johnson, P. R. Maul and F. H. Pasant CONTENTS OF VOLUME 22
High Energy Electron Beam Irradiation of Water, Wastewater and Sludge, Charles N. Kurucz, Thomas D. Waite, William J. Cooper and Michael J. Nickelsen Photon Spectroscopy Calculations, Jorge F. Fernández and Vincenzo G. Molinari Monte Carlo Methods on Advanced Computer Architecture, William R. Martin The Wiener-Hermite Functional Method of Representing Random Noise and its Application to Point Reactor Kinetics Driven by Random Reactivity Fluctuations, K. Behringer CONTENTS OF VOLUME 23
Contraction of Information and Its Inverse Problems in Reactor System Identification and Stochastic Diagnosis, K. Kishida Stochastic Perturbation Analysis Applied to Neutral Particle Transfers, Herbert Rieff Radionuclide Transport in Fractured Rock: An Analogy with Neutron Transport, M. M. R. Williams CONTENTS OF VOLUME 24
Chernobyl and Bhopal Ten Years on, Malcolm C. Grimston
CONTENTS OF EARLIER VOLUMES
xvii
Transport Theory in Discrete Stochastic Mixtures, G.C. Pomraning The Role of Neural Networks in Reactor Diagnostics and Control, Imre Pázsit and Masaharu Kitamura Data Testing of ENDF/B-VI with MCNP: Critical Experiments, Thermal-Reactor Lattices and Time-of-Flight Measurements, Russell D. Mosteller, Stephanie C. Frankle, and Phillip G. Young System Dynamics: An Introduction and Applications to the Nuclear Industry, K.F. Hansen and M.W. Golay Theory: Advances and New Models for Neutron Leakage Calculations, Ivan Petrovic and Pierre Benoist Current Status of Core Degradation and Melt Progression in Severe LWR Accidents, Robert R. Wright
CHILDHOOD LEUKAEMIA AND RADIATION: THE SELLAFIELD JUDGMENT E. Janet Tawn1 and Richard Wakeford2 1
Westlakes Research Institute Moor Row Cumbria CA24 3JZ UK
2
British Nuclear Fuels plc Risley Warrington WA3 6AS UK
INTRODUCTION In October 1993, a year from the commencement of court proceedings, Judgment was given in the High Court of Justice, London, for the Defendants, British Nuclear Fuels plc (BNFL) in cases brought by two individuals claiming compensation for the causation of leukaemia/lymphoma. This review will examine the events leading up to the trial and the scientific issues which were raised then, and subsequently, in addressing the question of a possible role for ionising radiation in excesses of childhood leukaemia occurring around nuclear installations. Ten years earlier a television documentary “Windscale - the Nuclear Laundry” had drawn attention to an apparent excess of childhood leukaemia in the coastal village of Seascale 3 km from the Sellafield nuclear installation in West Cumbria. The “cluster” consisted of 6 cases which had occurred since 1950, when nuclear operations commenced at Sellafield. This number of observed cases was about 10 times the number expected on the basis of national rates. The documentary suggested that exposure to radiation from radioactive discharges from Sellafield might be responsible for this excess of childhood leukaemia. The concern generated by this programme prompted the UK Government to set up an Independent Advisory Group, chaired by Sir Douglas Black, to enquire into these claims, and in 1984, the Group confirmed the excess of childhood leukaemia.1 However a radiological assessment carried out by the National Radiological Protection Board (NRPB) found that radiation doses to the children of Seascale from Sellafield discharges were several hundred times too small to account for the excess.2 This led to speculation that the risk of radiation-induced childhood leukaemia in Seascale had been greatly underestimated3 and a programme of scientific work was recommended to clarify
Advances in Nuclear Science and Technology, Volume 25 Edited by Lewins and Becker, Plenum Press, New York, 1997
1
2
E. JANET TAWN AND RICHARD WAKEFORD
the risk of childhood leukaemia in Seascale, including a case-control study of leukaemia and lymphoma in West Cumbria. The report of the Black Advisory Group1 also recommended that an expert group with “significant health representation” should be set up to examine the effects of environmental radioactivity and the Committee on Medical Aspects of Radiation in the Environment (COMARE) was established in 1985. COMARE’s first task was to reassess discharges from Sellafield following suggestions that certain emissions of radioactive material had been underestimated, in particular the atmospheric releases of irradiated uranium oxide particles from the chimneys of the early air-cooled military reactors at Sellafield (the “Windscale Piles”) during the mid-1950s. A reassessment of discharges4 did indicate that particular releases had been underestimated in the original assessment carried out for the Black Advisory Group, but the revision of the discharge record had relatively little impact upon the radiological reassessment carried out by the NRPB because the original assessment had been based, wherever possible, upon environmental measurements rather than discharge records. The First Report of COMARE5 found that the conclusions of the Black Advisory Group,1 that Sellafield radioactive discharges could not account for the excess of childhood leukaemia in Seascale, remained unchanged by the additional discharge information, but the Report expressed dissatisfaction over the way this information had come to light. The COMARE First Report5 reinforced the recommendations of the Report of the Black Advisory Group.1 Two of the recommendations of the Black Advisory Group1 concerned cohort studies of children born in Seascale and children attending schools in Seascale. These cohort studies would provide more secure information than the geographical correlation studies which had identified the excess of childhood leukaemia in Seascale. The results of these cohort studies were published in 1987.6,7 The excess of childhood leukaemia was confirmed although the results suggested that the excess was concentrated among those born in the village. The authors considered that this finding might indicate that one or more risk factors might be acting on a “locality specific basis before birth or early in life”.
CHILDHOOD LEUKAEMIA AROUND NUCLEAR INSTALLATIONS Meanwhile, several other reports of raised levels of childhood leukaemia around certain other nuclear installations in Britain were being made. In particular, researchers from the Scottish Health Service reported that a tenfold excess of leukaemia had occurred among young persons living within 12½ km of the Dounreay nuclear establishment in northern Scotland during 1979-84.8 This finding was based upon 5 cases. In addition, an excess of childhood leukaemia cases was found around the nuclear weapons facilities at Aldermaston and Burghfield in West Berkshire.9 COMARE investigated both of these reports and they became the subject of the COMARE Second Report10 and Third Report.11 The COMARE Second Report10 was published in 1988 and examined the incidence of leukaemia and non-Hodgkin’s lymphoma among young people under 25 years of age living in the vicinity of Dounreay. The Committee confirmed the excess of childhood leukaemia around Dounreay, particularly in the coastal town of Thurso about 13 km east of the site, but noted that the excess was confined to the period 1979-84 out of the entire period 1968-84 available for study. Also, the Thurso cases were restricted to the western part of the town, within 12½ km of Dounreay. There was no apparent reason for this space-time pattern, and COMARE were cautious in their interpretation. Nevertheless, the observation of an excess of childhood leukaemia around the only other nuclear fuel reprocessing plant in Britain led COMARE to suggest that some “feature” of Sellafield and Dounreay might be leading to an excess risk of childhood leukaemia around the sites.
CHILDHOOD LEUKAEMIA AND RADIATION
3
Again, a detailed radiological assessment carried out by the NRPB demonstrated that radiation doses due to radioactive discharges were much too low (by a factor of around 1000) to account for the excess of childhood leukaemia in Thurso.12,13 COMARE recognised that conventional radiation risk assessment could not account for the raised level of childhood leukaemia around Dounreay, but the Committee suggested that research be undertaken to investigate whether there might exist unrecognised routes whereby radiation exposure could materially raise the risk of childhood leukaemia. The COMARE Second Report10 made a number of recommendations for scientific work to be carried out to investigate this possibility. The COMARE Third Report11 was published in 1989 and dealt with the observation of a raised level of childhood leukaemia around Aldermaston and Burghfield.9 The Committee confirmed an excess of leukaemia in young children living in the area, and noted that the excess also extended to other childhood cancers, a phenomenon which had not been observed in other studies. A study of childhood cancer around the nearby nuclear establishment at Harwell which was carried out for the COMARE Third Report11 found no evidence of an excess risk of childhood leukaemia around this site. Another detailed radiological assessment carried out by the NRPB14 demonstrated yet again that radiation doses to children from discharges of radioactivity from Harwell, Aldermaston and Burghfield were far too low to account for the excess of childhood leukaemia. Indeed, the doses from the minute quantities of radioactive material released from the Burghfield facility, around which the excess of childhood leukaemia appeared to be concentrated, were about a million times too low to be capable of accounting for the additional cases. Near Aldermaston, doses from the discharge of naturally occurring radionuclides from the coal-fired boilers were greater than the doses received from the emission of nuclear material.15 COMARE recognised that there was no value in continuing to investigate individual reports of raised levels of childhood leukaemia near particular nuclear sites. They suggested that no further detailed investigations should be conducted until the background pattern of childhood leukaemia, and how this might influence childhood leukaemia near nuclear sites, was better understood. The Committee recommended a continuing programme of fundamental scientific research to better understand childhood leukaemia and the role of radiation in its induction. Other studies of childhood leukaemia around nuclear installations in Britain had also been carried out. Of particular importance was a study undertaken by the Office of Population Censuses and Surveys and the Imperial Cancer Research Fund which examined cancer incidence and mortality in local authority areas around all the major nuclear facilities in England and Wales.16,17 This study was of particular importance because sites were not selected on the basis of prior knowledge of the data, a source of uncertainty which had affected several other studies of childhood leukaemia around nuclear installations.18,19 The investigation found no evidence for a generally raised risk of cancer among those living in areas around nuclear sites, but it did find some evidence to suggest a raised risk of childhood leukaemia near nuclear establishments which commenced operations before 1955. However, interpretation of this finding was complicated by the level of childhood leukaemia in control areas (with which the areas around nuclear sites were being compared) being especially low, rather than the level around installations being especially high. Subsequent work which was carried out to address this problem of control areas confirmed the excess of childhood leukaemia in local authority districts around nuclear sites, but the authors noted that this excess occurred in a large area around the facilities and that there was no evidence of a trend of increase of childhood leukaemia with nearness of a district to a facility.20 A further study which examined cancer in districts around potential sites of nuclear power stations found a pattern which was very similar to that found around existing sites.21 The implication was
4
E. JANET TAWN AND RICHARD WAKEFORD
that the raised level of childhood leukaemia found in districts near existing nuclear installations was more to do with the nature of the area in which a nuclear facility was sited, rather than the facility itself. By the end of the 1980s, it was recognised that the risk of leukaemia among children living around certain nuclear installations in Britain appeared to be raised, although the interpretation of this finding was far from straightforward.18,22 It was broadly agreed that direct exposure to ionising radiation was most unlikely to be the cause of the raised levels of childhood leukaemia, and research had not revealed any gross underestimates of the risk of radiation-induced childhood leukaemia which could account for the observed discrepancy between actual numbers of childhood leukaemia cases and the numbers predicted by radiological assessments.23,24 For example, studies of childhood leukaemia after the highest levels of atmospheric nuclear weapons testing in the early 1960s25,26 have not detected any unexpected rise in rates due to doses from radionuclides present in the fallout, and these are very similar to the radionuclides released in the effluent of nuclear fuel reprocessing plants. Therefore, these studies provide evidence against such radionuclides deposited within the body making an unexpectedly high contribution to the risk of childhood leukaemia. The finding concerning raised levels of childhood leukaemia around certain nuclear installations in Britain led to a number of studies being carried out in other countries. No convincing evidence of a raised risk of childhood leukaemia around nuclear facilities has been found in the USA,27 France,28,29 Germany,30 Canada31 and Sweden.32 Recently, however, evidence has been published of an excess of childhood leukaemia near the La Hague nuclear reprocessing plant in Normandy,33 although the results of a detailed investigation of these cases have yet to be published. Following the trial, Bithell et al. 34 reported the results of the most detailed investigation of the distribution of childhood leukaemia and non-Hodgkin’s lymphoma in electoral wards near nuclear installations in England and Wales during 1966-87. Sites considered were the 15 major installations, 8 minor installations and 6 potential sites of power stations. In no instance was a statistically significant excess of cases found in areas within 25 km of an installation. Tests for a trend of increasing incidence with nearness of a ward to an installation were performed. The only significant results were for Sellafield (which was entirely accounted for by the 6 cases in Seascale) and for the minor facility at Burghfield. One potential site also gave a significant trend. The authors concluded that there was “virtually no convincing evidence for a geographical association of childhood leukaemia and non-Hodgkin’s lymphoma with nuclear installations in general”. This study must be regarded as the definitive geographical correlation study of childhood leukaemia and nuclear installations in England and Wales.
THE GARDNER REPORT As a result of a recommendation made in the Report of the Black Advisory Group,1 Gardner and his colleagues carried out a case-control study of leukaemia and lymphoma in those born in West Cumbria and diagnosed during 1950-85 while under 25 years of age and resident in the district. This was published in February 1990 and became known as the Gardner Report.35 Many factors potentially influencing the risk of childhood leukaemia in the district were examined in this study, but the most striking finding was a statistically significant association between doses of radiation as recorded by film badges worn by men employed at Sellafield before the conception of their children and leukaemia in their children. An association was found with two measures of preconceptional dose: a recorded external dose of accumulated by a father before conception and a dose
CHILDHOOD LEUKAEMIA AND RADIATION
5
of received in the 6 months immediately preceding conception. These doses were calculated from annual summaries of film badge records, and doses for part-years were obtained pro rata from the annual doses. Relative risks of around 6 to 8 were reported for these highest dose categories. Similar associations were also found for leukaemia and non-Hodgkin’s lymphoma combined, although the results were driven by the leukaemia cases. The statistically significant associations were based on just 4 cases of leukaemia and a similarly small number of controls, and the same 4 cases were responsible for all the significant associations. Consequently, lower 95% confidence limits for the significantly raised relative risks were all between 1 and 2. Examination of the preconceptional doses received by the fathers of the 5 Seascaleborn leukaemia cases in the study led the authors to suggest that the association could effectively explain the excess of cases in the village. In the absence of any other factors which could account for the excess, particularly direct exposure to radiation from radioactive effluent, the Gardner hypothesis, as it became known, was attractive and the case-control study had apparently achieved its objective. The causal hypothesis put forward to explain the association between paternal preconceptional radiation exposure and childhood leukaemia suggested that the excess cases were the result of radiationinduced sperm mutations which manifested themselves in first generation progeny i.e. a dominantly inherited effect. The implications of this hypothesis were commented on at the time, particularly by scientists in the fields of human genetics and radiobiology.36-41 Two issues were of prime concern: the discrepancy between the genetic risks implied by the Gardner hypothesis and those generated by the International Commission on Radiological Protection (ICRP),42 and the lack of evidence to suggest that leukaemia has a strong heritable component. Nevertheless the Gardner Report received considerable media attention and the statistical association was translated into a causal link.
THE LEGAL CASES It was on the publication of the COMARE Second Report10 that the possibility of legal action on behalf of individuals (or their families) who had developed leukaemia or non-Hodgkin’s lymphoma while living near nuclear installations began to be seriously considered. The London firm of solicitors, Leighs (later Leigh, Day & Co) took the unusual step of advertising in a local Cumbrian newspaper for clients wishing to pursue claims against BNFL. Writs were issued in 1989 on behalf of children who had developed leukaemia or non-Hodgkin’s lymphoma while living near Sellafield. These writs claimed personal injury resulting from exposure to radiation from Sellafield. Writs were actually served in 1990 within weeks of publication of the Gardner Report and the focus of the claims shifted from environmental exposure to paternal preconceptional irradiation. The two cases of Reay BNFL and Hope BNFL were heard concurrently before a single judge between the period October 1992 and June 1993. The Judge arrived at his decision on the balance of probabilities, based on evidence presented by expert witnesses who prepared one or more written reports and gave oral evidence in Court. In both cases the father had received cumulative film badge doses prior to the child’s conception, although only Mr Reay had received in the 6 months preceding conception. Dorothy Reay was born in the town of Whitehaven, 13 km north of Sellafield and died of leukaemia there in 1962 at the age of 10 months. Vivien Hope was born in the village of Drigg, 3 km south of Seascale, in 1965 and moved to Seascale at the age of 6 years. In 1988 while still living in Seascale she was diagnosed as having non-Hodgkin’s lymphoma and to date she is in remission.
6
E. JANET TAWN AND RICHARD WAKEFORD
Because of the heavy reliance placed upon the Gardner Report, the Court ordered the UK Medical Research Council (MRC) and BNFL to make available to both Plaintiffs and Defendants, on a confidential basis, all relevant base data and associated dosimetry data of the West Cumbria case-control study. This enabled experts in dosimetry, statistics and epidemiology to examine and reanalyse the data used in the Gardner Report for the purposes of preparing expert evidence. In addition the legal process of Discovery obliged both sides to make available to each other any document held by them that was of relevance to the issues in the legal action. BNFL and its predecessor, the United Kingdom Atomic Energy Authority (UKAEA) gave copies of many thousands of documents to the Plaintiffs relating to occupational radiation dose and discharges to the environment. As a consequence the Plaintiffs suggested that the use by Gardner et al.35 of annual summaries of film badge readings had underestimated, perhaps significantly, the actual dose received by, for example, not including doses to the testes from internally deposited radionuclides. In addition, individual monitoring for neutrons had not been carried out in the early years of operations at Sellafield, personal protection being achieved through area monitoring. As a consequence neutron doses had to be individually assessed for a number of fathers in the West Cumbria case-control study. Further, the accuracy of early film badges under certain conditions was questioned and individual dose records were examined to determine what affect this might have upon preconceptional doses. Considerable debate took place outside the Court but in the end photon doses, assessed neutron doses and internal doses were agreed for the purposes of the litigation for Mr Reay and Mr Hope and for the relevant case and control fathers in the Gardner Report. These doses were used in the Gardner Report reanalyses. Mr Reay’s total preconceptional dose was agreed to be 530 mSv and that for Mr Hope 233 mSv. The Plaintiffs received an enormous amount of information during the Discovery process relating to discharges of radioactive material from Sellafield but were faced with some difficulty in claiming that environmental exposure to radiation was the most likely cause of the malignant diseases since this possibility had been examined in considerable detail in the period from the broadcast of the original television documentary in 1983. Those who had examined this possibility, including the NRPB,2,4 had concluded that radiation doses were a factor of several hundred times too low to account for the excess of childhood leukaemia in Seascale, and the various pathways and mechanisms that had been suggested as possibly leading to an underestimation of risk had effectively been discounted.23 It was partly because of this that the Gardner hypothesis looked attractive as an explanation for the Seascale “cluster”. In order to pursue environmental radiation causation it was necessary, therefore, either to identify a gross underestimate of radioactivity discharged, or to demonstrate that dose to target tissue was considerably greater than had been thought, or to postulate that the risk of childhood leukaemia due to somatic exposure to radiation had been substantially underestimated. Moreover, these large discrepancies would have to have been missed by the detailed examinations that had been carried out. This was a formidable task. In the end, the Plaintiffs did not put expert evidence concerning environmental doses before the Court, and contented themselves with cross-examining the Defendants’ experts in this field. The probability that the two cancers had been caused by radioactive material discharged from Sellafield was calculated to be very low: 0.16% for Dorothy Reay and 1.4% for Vivien Hope. During the trial, the Plaintiffs conceded that radionuclides discharged from Sellafield could not alone be the cause of the two cases or of the excess of childhood leukaemia in Seascale.
CHILDHOOD LEUKAEMIA AND RADIATION
7
THE NATURE OF EPIDEMIOLOGY Epidemiology is the study of patterns of disease in groups of humans with the objective of identifying those factors influencing the risk of disease. Results are obtained through the statistical analysis of data concerning potential risk factors in such groups. Epidemiology is an observational, that is a non-experimental, science which uses data gathered under the scientifically uncontrolled conditions of everyday life. Since data have not been generated under experimental conditions, particular care has to be taken in the interpretation of the results of epidemiological studies. An epidemiological association could directly reflect an underlying cause-and-effect relationship, but other interpretations must always be considered. One such alternative explanation is that a statistical association has occurred through the play of chance, and does not represent a genuine effect. By definition, statistically significant results will occur at a low frequency by chance alone. Special care has to be taken in the interpretation of statistically significant results in a study in which many statistical tests have been performed. This was the case in the West Cumbria case-control study35 which was essentially exploring data in a search for an indication of what might be the cause of the Seascale childhood leukaemia “cluster”. Chance can act to produce statistically significant results in many insidious ways, particularly in exploratory studies, and especially when the structure of an analysis has been influenced, however unintentionally, by some prior knowledge of the data. A further explanation of an epidemiological association which is not causal is that biases or systematic effects have entered into the study, such that the association is artificial. Because epidemiological data are generated under scientifically uncontrolled conditions, biases can be introduced into studies if sufficient care is not taken. Thus, systematic errors can occur through, for example, an unrepresentative selection of cases or controls, or through biased collection of information. Careful design and execution of an epidemiological study is required to avoid the introduction of bias. Another way in which an association found in an epidemiological study does not represent a direct cause-and-effect relationship is through confounding. In this case, unlike with chance or bias, a causal relationship is responsible for the epidemiological association, but only indirectly. The factor identified in the study is, in fact, related to a genuine causal factor and is not, in itself, the cause of the disease. In an observational study, the problems normally associated with experimental research are magnified, and this requires considerable caution in the interpretation of findings. Inferential frameworks have been proposed to assist in the scientific assessment of epidemiological associations. Probably the most famous of these was proposed by the eminent British epidemiologist, Sir Austin Bradford Hill in 1965.43 He suggested the following nine criteria of causality as a guide to the interpretation of epidemiological findings: Temporality This is a necessary condition for a causal relationship and requires that a putative cause must precede the effect. Consistency Owing to the difficulties encountered in epidemiological research, an association should be found under different conditions if a cause-and-effect interpretation is viable. Thus the association should be found with different study designs, in different groups of people, under as wide a variety of circumstances as possible. Strength of Association An association which is large and has high statistical significance is less likely to have been produced by chance or bias alone.
8
E. JANET TAWN AND RICHARD WAKEFORD
Biological Gradient An epidemiological association should demonstrate an appropriate dose response relationship, that is the association should tend to increase as the dose, or level of exposure to the supposed cause, increases. Coherence An association found in a limited group of individuals should be coherent with a wider body of epidemiological data. Therefore, if cigarette smoking is found to be associated with lung cancer in a study group of individuals, then national rates of lung cancer would be expected to increase (after an appropriate time lag to account for the latent period) with the increased consumption of cigarettes at a national level. They have in fact done so. Biological Plausibility An epidemiological association should not run counter to the established body of biological knowledge. This includes results from animal experiments. The criterion of biological plausibility is growing increasingly important in the interpretation of epidemiological associations as this knowledge expands. Human “Experiments” If circumstances of exposure change, mimicking experimental conditions, then the proposed consequent effect should change accordingly. Therefore, if cigarette consumption decreases at the national level as a result of public health campaigns, then lung cancer rates should decrease after an appropriate time lag, which they have done. Analogy It may be that a particular epidemiological association is analogous to another association for which the evidence for causality is stronger. Such an analogy would provide additional assurance that the association represented a cause-and-effect relationship. Specificity An association can be more likely to be causal if a specific effect is caused by a specific exposure, rather than a more general association with a spectrum of diseases with different causes. Sir Austin Bradford Hill said of these nine criteria of causality: “None of my nine viewpoints can bring indisputable evidence for or against the cause-and-effect hypothesis and none can be required as a sine qua non. What they can do, with greater or less strength, is to help us to make up our minds on the fundamental question - is there any other way of explaining the set of facts before us, is there any other answer equally, or more, likely than cause and effect?” “No formal test of [statistical] significance can answer those questions. Such tests can, and should, remind us of the effects that the play of chance can create, and they will instruct us in the likely magnitude of those effects. Beyond that they contribute nothing to the ‘proof’ of our hypothesis.” It will be seen that the interpretation of an epidemiological association is a complex process which has to be carried out with considerable care if erroneous inferences are not to be made. There have been many instances in epidemiology where apparently convincing associations have turned out not to be causal. Epidemiology could be seen as a statistical stopgap which is used in the absence of detailed biological mechanistic knowledge. Epidemiology would not be necessary if such mechanistic knowledge were available, but in most cases this ideal situation is far from being reality. Epidemiology does have the considerable strength of using direct observations on groups of humans; in other words it is a direct measure of health under particular circumstances. But epidemiological studies do need to be conducted, and results interpreted, with the appropriate caution.
CHILDHOOD LEUKAEMIA AND RADIATION BACKGROUND FINDINGS
TO THE GARDNER HYPOTHESIS AND
9 SUBSEQUENT
From the discussion above, it is clear that the initial interpretation of the association between paternal preconceptional radiation dose and childhood leukaemia found in the West Cumbria case-control study35 had to be made in the context of the body of scientific knowledge existing at that time. The epidemiological evidence supporting a causal interpretation was, at best, weak and there was evidence against a direct cause-and-effect relationship. Leukaemia among 7387 offspring of the Japanese atomic bomb survivors had been studied.44 The results provided no support for irradiation of fathers before conception of their children materially increasing the risk of leukaemia in these children, the observed number of cases being 5 against an expected number of 5.2, even though the doses received during the bombings were, on average, much higher than those received by the Sellafield fathers. A review of pre-1989 studies concerning the health effects of lowlevel preconceptional radiation by Rose for the then Department of Health and Social Security concluded that there was no reliable evidence of a causal association between childhood malignancies and low level doses of preconception paternal or maternal irradiation.45 Although a Chinese study initially reported an association of leukaemia with paternal diagnostic X-ray dose,46 a follow-up study failed to confirm these findings suggesting that the original association was probably due to recall bias.47 (The same group has recently reported a study in the USA which found a positive association of paternal preconceptional X-rays with infant leukaemia48 but again there are difficulties with self-reporting of data which could lead to recall bias). The COMARE Second and Third Reports10,11 had examined possible mechanisms by which occupational exposure, including a preconceptional effect, could be involved in the induction of childhood cancer and had concluded that such mechanisms were “highly speculative”. The Committee did, however, advise that these needed to be explored if only to be dismissed. COMARE, in a Statement of Advice to Government (Hansard 2 April 1990) issued two months after the publication of the West Cumbria case-control study35 noted the statistical association between recorded external radiation dose and the incidence of childhood leukaemia but were cautious in their interpretation since the conclusions of the study were based on very small numbers and the novel findings had not previously been recorded. The Committee further noted that “this type of study cannot provide evidence of causal relationship” and that additional evidence was required before firmer inferences could be drawn. Epidemiological studies of relevance to the scientific interpretation of the association between recorded external radiation dose and childhood leukaemia found in the Gardner Report soon followed. Yoshimoto et al.49 updated the study of cancer among the live born offspring of one or both parents who had been irradiated during the atomic bombings of Hiroshima and Nagasaki. Fourteen cases of leukaemia were found in children of parents who could be assigned the latest gonadal dose estimates against 11.2 expected from an unirradiated control group, a non-significant excess. Little compared the results of Gardner et al.35 with those from the Japanese study. He demonstrated that the excess relative risk coefficient (the excess risk per unit dose) derived from the Japanese data, whether considering parental or paternal doses, was statistically incompatible with that derived from the West Cumbrian data, the coefficient obtained from the Gardner Report being about 50 to 80 times higher than those obtained from the offspring of the Japanese bomb survivors.50 Using data obtained from the Radiation Effects Research Foundation in Japan, Little51 also showed that the risk of childhood leukaemia among those Japanese children born to fathers irradiated during the bombings and conceived within
10
E. JANET TAWN AND RICHARD WAKEFORD
approximately half a year of this exposure was also statistically incompatible with the findings of Gardner et al.35 In the COMARE Second Report10 the recommendation was made that a leukaemia and lymphoma case-control study be carried out around Dounreay and the results of this study were reported in 1991.52 After the publication of the Gardner Report the primary interest in the Caithness case-control study concerned the findings of relevance to paternal preconceptional irradiation. Urquhart et al.52 found that of 8 cases of childhood leukaemia and non-Hodgkin’s lymphoma resident within 25 km of Dounreay at diagnosis only 2 had fathers who had received a dose of radiation in the nuclear industry prior to the child’s conception and both of the preconceptional doses were <50 mSv. The authors observed that paternal preconceptional irradiation could not explain the excess of childhood leukaemia and non-Hodgkin’s lymphoma in the vicinity of Dounreay and therefore any “feature” common to both Sellafield and Dounreay which was raising the risk of childhood leukaemia in the vicinity of these installations (as suggested by COMARE in 198810) could not be paternal exposure to radiation prior to conception. However the number of cases considered by the Caithness case-control study was so small that the findings concerning paternal radiation dose were statistically compatible with both those of the Gardner Report and those of the Japanese study. A further case-control study53 of childhood leukaemia and non-Hodgkin’s lymphoma in three areas where excesses of childhood leukaemia had been reported (including West Cumbria) did find evidence of a raised incidence of childhood leukaemia and non-Hodgkin’s lymphoma associated with paternal preconceptional irradiation but there was considerable overlap with the study by Gardner et al.35 and therefore this study did not provide independent support for the Gardner hypothesis. The results of the first large childhood leukaemia case-control study designed to test the Gardner hypothesis became available just before the commencement of the trial in 199254 and were published subsequently. McLaughlan et al.54,55 examined 112 childhood leukaemia cases and 890 matched controls born to mothers living around operating nuclear facilities in Ontario, Canada and diagnosed during 1950 - 1988. No evidence was found for an increased risk associated with total cumulative paternal preconceptional dose or with paternal exposure to radiation in the 6 months immediately prior to conception. Looking specifically at the associations found in the study of Gardner et al.35 it is notable that no case but 5 controls were associated with cumulative paternal preconceptional doses and no case but 7 controls were associated with 6 month preconceptional doses Paternal exposure to tritium (principally associated with operation of CANDU reactors) was also assessed. No case, but 14 controls were associated with paternal exposure to tritium before conception. The Ontario case-control study, therefore, provided no support for the Gardner hypothesis. However, even a study of this size could not produce results which were statistically incompatible with those of the Gardner Report as demonstrated in expert evidence given by G.R. Howe during the trial and later by Little.56 During the trial Kinlen et al.57 published the results of a further large case-control study which examined childhood leukaemia and non-Hodgkin’s lymphoma throughout Scotland in relation to radiation doses received in the nuclear industry. This study of 1369 cases and 4107 controls covering the period 1958-1990 found no association with paternal preconceptional irradiation whether this be total cumulative dose or the dose received 6 months prior to conception. The Scottish case-control study does not support the findings of Gardner et al.35 but again the results are not incompatible statistically with those of the West Cumbria study. However, when Little56 later combined the results of the Ontario and Scottish studies and compared these with the Gardner Report the difference was of marginal statistical significance (p = 0.10-0.15).
CHILDHOOD LEUKAEMIA AND RADIATION
11
One feature of the West Cumbria study which seemed anomalous was the concentration of leukaemia cases associated with relatively high doses of paternal preconceptional irradiation in Seascale with 3 of the 4 cases in the highest dose groups being born in the village. This appeared to run contrary to the general knowledge that the majority of Sellafield workers resided in West Cumbria outside Seascale. Parker et al.58 investigated this peculiarity by placing onto a computer database records from the birth certificates of just over 250 000 livebirths registered within Cumbria during 1950-89. Using these data from birth certificates, and data on employees held at Sellafield, just over 10 000 Cumbrian born children were linked to fathers who were employed at Sellafield before the child’s conception. Of these, 9256 were associated with paternal preconceptional radiation exposure. Only 8% of these children were born in Seascale and only 7% of the collective dose of paternal preconceptional irradiation (whether cumulative or 6 months) was associated with these Seascale births. These proportions are highly inconsistent with paternal preconceptional irradiation providing the explanation for the Seascale leukaemia cluster since on the basis of the association seen in Seascale many more cases of childhood leukaemia would be expected to have been found in the rest of West Cumbria. The results of this study were presented in expert evidence by one of the authors (RW) during the trial, and provided strong grounds for believing that paternal preconceptional irradiation could not be the sole explanation for the Seascale cluster. Again during the trial, Kinlen59 published the results of a study of childhood leukaemia and non-Hodgkin’s lymphoma incidence in children living in Seascale. He found a significant excess not only among those born in the village but also among those born elsewhere. The significant excess in those born outside the village was based on 5 cases, 4 of which were associated with no (or in one case a trivial) dose of paternal preconceptional irradiation. Kinlen concluded that the dose of radiation received by a father before the conception of his child could not explain the excess of childhood leukaemia and non-Hodgkin’s lymphoma in Seascale because it could not account for the significant excess of cases in those born outside Seascale, but diagnosed while resident in the village. G.R. Howe, in expert evidence presented during the trial, showed that the raised relative risk associated with a paternal preconceptional irradiation dose of was effectively confined to those children born in Seascale. This observation was confirmed by the comprehensive study by the UK Health and Safety Executive (HSE)60,61 which was published after Judgment in the Reay and Hope BNFL cases had been delivered. The HSE study found that a statistically significant association between childhood leukaemia and non-Hodgkin’s lymphoma and paternal preconceptional irradiation was apparent among those born in Seascale, but that the raised relative risk in Seascale was statistically incompatible with the absence of a significantly raised relative risk among those born outside the village. No significant association between childhood leukaemia and nonHodgkin’s lymphoma and the paternal dose of radiation received shortly before conception (based upon original dose records) was found for either children born in Seascale or children born in the rest of West Cumbria, the association originally reported by Gardner et al.35 being heavily influenced by the proportioning of annual dose summaries, which led to erroneous dose estimates. The HSE study found that the positive association for childhood leukaemia and non-Hodgkin’s lymphoma did not extend to other childhood cancers. Indeed a negative association was found between these cancers and cumulative paternal preconceptional dose. One matter which received attention during the trial was whether the film badge doses producing the paternal preconceptional irradiation association in the Gardner Report might be acting as a surrogate for some other occupational exposure, in particular exposure to neutrons or internally incorporated radionuclides. G.R. Howe, in expert
12
E. JANET TAWN AND RICHARD WAKEFORD
evidence, demonstrated that although photon and neutron doses were correlated, the Gardner association appeared to be driven principally by photon doses. This finding was supported by the HSE study which, in a qualitative assessment of neutron exposures, found no association with assessed potential for exposure to neutrons. G.R. Howe also found no evidence for an independent association with internal dose. Again, this was confirmed by the HSE study and by the absence of an association with tritium in the Ontario case-control study 54,55 and with the high alpha particle doses from thorium and its decay products in Danish patients injected with the contrast medium, Thorotrast, in the later study of Andersson et al.62 These results make internal irradiation of the testes an unlikely explanation for the Gardner association. Indeed, no occupational factor examined in the HSE study could explain the restriction of the significant excess of childhood leukaemia and non-Hodgkin’s lymphoma among offspring of Sellafield workers to that small fraction who were born in the village of Seascale. The HSE study provided strong confirmation of the validity of the evidence upon which Judgment in the Reay and Hope cases was based. Little et al.63,64 subsequently showed that the Seascale association was statistically incompatible not only with the lack of an association in the rest of West Cumbria but also with the negative results of all other substantive studies using objective measures of radiation dose. One recommendation of the COMARE Third Report11 was that a case-control study of childhood leukaemia should be carried out around Aldermaston and Burghfield and the results of this study were published during the trial.65 Although an association of borderline significance was found with being monitored for exposure to radiation before conception, unlike the Gardner study there was no convincing evidence of an association with actual recorded external dose. The doses received were trivial in all instances, the cumulative doses being <5 mSv. The authors speculated that some unmonitored exposure to radioactive substances or chemicals could be responsible for the observed association but it was clear that the association could not account for the excess of childhood leukaemia in the area around Aldermaston and Burghfield, only 4 fathers of affected children being employed in the nuclear industry before conception. The results of two relevant geographical correlation studies were published during the course of the trial. Draper et al.66 examined cancer incidence in the vicinity of Sellafield between 1963 and 1990. They confirmed the excess of childhood leukaemia and non-Hodgkin’s lymphoma in Seascale over the period studied by the Black Advisory Group and found that this excess appeared to persist into the period after the Seascale cluster was originally reported in the television documentary in 1983. This excess of cases did not extend to those over 25 years of age, nor did it extend generally to the remaining area of the two local authority districts around Sellafield or to the rest of the county of Cumbria. Craft et al.67 examined cancer incidence among young people living in over 1200 electoral wards in the north of England during 1968-85. They found that Seascale had the most significant excess of childhood leukaemia and non-Hodgkin’s lymphoma. Interestingly, they also identified another electoral ward, (Egremont North), situated 7 km north of Sellafield with an excess of acute lymphoblastic leukaemia which fell within the top five most significant excesses in wards in the north of England. However, these two geographical correlation studies by themselves could not identify the causes of these excesses. The demonstration in evidence put before the Court that the association between paternal preconceptional irradiation and childhood leukaemia was effectively restricted to the village of Seascale, and did not extend to the great majority (>90%) of the offspring of the Sellafield workforce who were born outside this village, led to the Plaintiffs suggesting that the explanation for this phenomenon was an interaction between paternal radiation exposure and some factor (“Factor X”) which was essentially confined to
CHILDHOOD LEUKAEMIA AND RADIATION
13
Seascale. This explanation proposed that the irradiation of testes predisposed offspring to the action of some factor which affected the individual after conception, and that “Factor X” operated predominantly, but not exclusively, in Seascale. “Factor X” was suggested to be an infectious agent such as a virus, or environmental radioactivity. Although it is not unusual in epidemiology to find two risk factors which act together more than additively (for example, radon and cigarette smoke as risk factors for lung cancer), it is most unusual to find factors acting together more than multiplicatively. G.R. Howe, in expert evidence, demonstrated that the restriction of the paternal dose association to Seascale was so extreme that any interaction between paternal preconceptional irradiation and “Factor X” would have to be substantially greater than multiplicative, and that such an interaction was implausible. The need for the interaction to be appreciably supramultiplicative in order to explain the Seascale cluster was later confirmed by Little et al. 63 Further evidence against an interactive process being capable of explaining the restriction of the paternal preconceptional irradiation association to Seascale was provided by the Egremont North childhood leukaemia excess.67 One of the authors (RW) presented evidence to show that none of the four cases which occurred in Egremont North was associated with paternal preconceptional irradiation, even though the collective dose of such irradiation in this electoral ward was greater than in Seascale. If some factor in Egremont North is increasing the risk of childhood leukaemia, then it would be most remarkable that this factor did not affect those children who are supposedly most at risk, that is the children whose fathers were exposed to radiation prior to conception. That paternal preconceptional irradiation should take part in an exceptionally strong interaction with “Factor X” in Seascale, but not play any role in an excess some 10 km away seems highly unlikely. These findings were later reported by Wakeford and Parker.68
RADIATION GENETIC RISK
The causal hypothesis to account for the statistical association between paternal preconceptional irradiation and childhood leukaemia proposed that irradiation of fathers had induced mutations in sperm which had been transmitted to their offspring and subsequently resulted in the development of leukaemia. The biological plausibility of this proposed mechanism came under considerable scrutiny. Although this was only one of the criteria proposed by Sir Austin Bradford Hill in 1965 for establishing causation epidemiologically, considerable advances have been made in biological knowledge since that time and the necessity of there being an acceptable causal mechanism to explain the association was considered by both epidemiologists and geneticists to be of prime importance. Despite extensive studies on the offspring of the A-bomb survivors, no evidence has emerged of any adverse health effects attributable to inherited radiation-induced mutations. Indeed, no studies of exposed human populations have indicated unequivocally a radiation-induced heritable effect. In discussing their findings Gardner et al.35 noted that their report was “the first of its kind with human data” and this point was also made in the accompanying editorial in the British Medical Journal.69 Because of this lack of human information, genetic risk estimates have had to rely heavily on mouse data derived in controlled experiments using relatively large numbers of animals. The 7 specific-locus test developed by Russell70 has been used extensively for studying the qualitative and quantitative effects of radiation. Such experiments suggest a genetic doubling dose for low LET acute irradiation of 0.4 Sv.71 A significant finding to emerge from these early studies was that the genetic damage was greater by a factor of 3 if a given dose is delivered acutely rather than chronically.72 Applying a dose rate reduction factor
14
E. JANET TAWN AND RICHARD WAKEFORD
of 3 to the mouse data for acute exposures gives a doubling dose of 1.2 Sv for chronic low LET radiation. The United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) have extrapolated this estimate to humans and use a doubling dose of 1 Sv, which is applied to incidence data on human genetic conditions to obtain risk estimates.73,74 The International Commission on Radiological Protection (ICRP) apply the risk estimates generated by UNSCEAR to derive appropriate protection practices.42 When considering first generation effects in a reproductive population, the risk for Mendelian plus chromosomal disorders from 10 mSv of low LET radiation exposure is estimated to be 18 per 106 live births. A further 12 cases of disease with a multifactorial origin is expected of which >90% will be of adult onset. Although no adverse effects were seen in Japan, a recent review by Neel et al. 75 has combined the analyses of a range of endpoints, each weighted for its heritable component, and shown that this combined data is consistent with a minimal doubling dose of between 1.7 and 2.2 Sv. Following examination of the Japanese parental exposures the authors have opted for a dose rate reduction factor of 2 as being most appropriate for these conditions and thus derive a doubling dose for chronic ionizing radiation of 3.4 to 4.4 Sv. Disturbed by the discrepancy between this estimate and the 1 Sv used for risk estimation, Neel and Lewis undertook a reanalysis of the mouse data for 8 different genetic endpoints and derived a doubling dose of 1.35 Gy.76 When a dose rate reduction factor of 3 is applied this gives an estimate for the doubling dose for chronic radiation of 4.05 Gy. This study also noted that there are good reasons to believe that the 7 specific recessive loci originally chosen by Russell are particularly mutable and more recent comparative studies have shown that they are 10 times more sensitive per locus than dominant cataract mutations.77 ICRP have noted the work of Neel and Lewis and acknowledge that the use of a doubling dose of 1 Sv for determining genetic risk from low dose rate low LET radiation in man is conservative.78
GENETIC RISK EXPOSURE
FROM
SELLAFIELD
OCCUPATIONAL
RADIATION
The genetic risk imposed by occupational radiation exposure on workers at Sellafield was the subject of expert evidence for the trial and has since been published. 79,80,81 The study by Parker et al.58 revealed that during 1950-1989 a total of 9256 children were born in Cumbria to fathers who had been occupationally exposed to radiation at Sellafield. This group of men had a collective preconceptional dose of 539 person Sv giving a mean dose of 58 mSv. If the ICRP risk estimate42,78 is applied, the expectation is of approximately 1 excess case of Mendelian plus chromosomal disorders in this population of children. Since the background frequency of such disorders is 16 300 per 10 livebirths (10 000 dominant, 2500 recessive, 3800 chromosomal73,74) this one extra case would be occurring in addition to approximately 150 spontaneous cases. A further contribution of <1 case of severe childhood disease with multifactorial origin would occur against an estimated background of about 185 births (2%) suffering from major congenital abnormalities of multifactorial etiology. Clearly any genetic effect in this population of 9256 children will not be discernible against statistical fluctuations in the background rate. Furthermore no genetic effect is going to be detectable in the subgroup of 774 children born to fathers with paternal preconceptional irradiation from Seascale in whom the dose profile is similar. The collective paternal preconceptional dose for the Seascale children is 38 person Sv and if the 5 leukaemia cases in this group are attributed to this dose the implied mutation rate, assuming involvement of only one locus, is per locus per Sv. A
CHILDHOOD LEUKAEMIA AND RADIATION
15
considerable amount of experimental data is available on the induction of mutations by radiation both in vitro and in vivo. These indicate induced rates which range from 1 to per locus per Sv.82,83,84 The rate deduced from the Seascale data is therefore 3 to 5 orders of magnitude greater. Postulating the involvement of a number of different genes with typical radiosensitivity will not explain this difference, since this would necessitate that the majority of the functional genes in man (50 000 - 100 000) could mutate in the germline and result in the single endpoint of leukaemia in the subsequent offspring. To circumvent the difficulty of having to confine a radiation-induced heritable mechanism of leukaemia induction to Seascale, it has been suggested, as discussed earlier, that preconceptional irradiation could be interacting with a postconceptional co-factor (“Factor X”) specific to the village of Seascale. However, since the proposed initiating or predisposing event is an inherited genetic change, the incidence of leukaemia, at the very least, represents the mutation rate of a dominant gene with complete penetrance. If, however, such a mutation only confers a modest degree of predisposition and not all those who inherit a defective gene contract leukaemia, then an even greater underlying mutation rate has to be implied. HERITABILITY OF LEUKAEMIA The Gardner hypothesis postulates an inherited etiology for the excess of childhood leukaemia in Seascale. However, unlike such childhood malignancies as retinoblastoma and Wilm’s tumour, where inheritance of a defective tumour suppressor gene provides a high risk of malignancy, evidence has not emerged for a similar mechanism for leukaemia. Although 10 times more common than retinoblastoma, which exhibits well established familial patterns, trawling of registers has revealed only a few family clusters of childhood leukaemia with only one apparent parent to offspring transmission.85 When considered against background rates in large populations this could be a chance finding. An increase in leukaemia in the offspring of patients who have received treatment for cancer could be indicative of genetic transmission, either as a result of an already preexisting familial predisposing gene or resulting from a new germline mutation induced by radiotherapy and/or chemotherapy. In fact, no such increase has been observed either for children of cancer patients generally or for children of survivors of leukaemia or nonHodgkin’s lymphoma.86,87 Further evidence arguing against an inherited predisposing gene for leukaemia comes from studies of childhood cancers in different immigrant groups. Racial incidence figures are maintained for such cancers as retinoblastoma and Wilm’s tumour whereas the incidence of leukaemia is associated with country of residence rather than ethnic origin, suggesting an environmental rather than heritable etiology.88 Data which, when first evaluated, was thought to point to a heritable component is the high rate of concordance for leukaemia in monozygotic twins. This, in the main, is confined to leukaemias in the first year of life and is attributable, not to an inherited mutation but to initiating events occurring in one twin in utero with subsequent transplacental passage to the other.89 The molecular nature of the genetic change in the MLL (or HRX) gene which characterises infant null acute lymphoblastic leukaemia has been analysed in three pairs of twins with the disorder. The rearrangement, which is not constitutional, was found to be unique to each twin pair thus providing evidence for the The high rate of concordance in mutational event occurring during pregnancy.90 monozygotic twins for infant leukaemia is the result of all steps towards malignancy occurring in utero. For leukaemia in older children, although the initiating genetic change
16
E. JANET TAWN AND RICHARD WAKEFORD
may occur prenatally and become established in both twins, different postnatal events result in a much lower rate of concordance. Nevertheless leukaemia is a genetic disease and mutational changes associated with leukaemia are readily identified by the presence of chromosomal rearrangements.91 These changes are acquired somatic mutations, many of which are associated with the activation of proto-oncogenes. Chromosome rearrangements move such genes from their normal regulatory control sequences placing them next to promoting regions thereby causing increased activity which results in a breakdown of proliferative constraints in the cell. Activated oncogenes invariably act in a dominant manner and thus only one of a pair of proto-oncogenes in a cell needs to be altered for such an effect to occur. There is no evidence from human studies to suggest that chromosome rearrangements resulting in proto-oncogene activation can be transmitted through the germ line. Genetic engineering has produced viable transgenic mice with constructs of oncogenes plus certain specific promotors incorporated into the constitutional genome but these have been produced for the study of the sequential steps of tumour development and the effect of various carcinogenic agents on the progression from the predisposed cell to malignancy and not for the study of heritability.92 Indeed attempts to introduce the bcr-gene with its natural promotor failed to produce viable offspring93 and activated oncogenes in the germ cell will most likely disrupt normal fetal development.94,95 This considerable evidence which refutes the central tenet of the Gardner hypothesis, i.e. that leukaemia can be caused by the inheritance of a mutated dominant gene, was raised by those questioning the biological plausibility of the causative mechanism suggested by Gardner et al.35 and was addressed in detail by H.J.Evans and J.V.Neel during the trial. There are however a number of rare well defined recessively inherited syndromes, such as ataxia telangiectasia and Fanconi’s anaemia, in which leukaemia occurs as one of a range of clinical endpoints.96 Such diseases are characterised by DNA repair deficiency, chromosome instability, and reduced immunocompetence, all factors which are thought to contribute to the enhanced risk of the somatic induction and maintenance of leukaemia initiating events. Leukaemia is also one of a range of malignancies seen in the Li Fraumeni syndrome, a familial syndrome in which enhanced cancer predisposition is associated with inheritance of a defective tumour suppressor gene.97 However, consideration of the Seascale in the Gardner Report and also the two cases brought before the Court indicate nothing to suggest that any are part of a wider syndrome and they appear to be indistinguishable clinically from other sporadic cases of leukaemia/lymphoma. This would seem to rule out any possibility that the effect reported by Gardner et al.35 was due to a recessive mutation in individuals already heterozygous for a cancer predisposing syndrome. In any event it would seem unlikely that the population of Seascale should contain a disproportionate number of such individuals. In the event, a review of the evidence led to the acceptance in the trial that the heritable component of childhood leukaemia is likely to be small. Neel has suggested that it is probably no more than 5%,98 and since the incidence of childhood leukaemia in the United Kingdom is about 1 in 1500 the background incidence of inherited leukaemia is therefore unlikely to be greater than 1 in 30 000. However if the 5 cases of leukaemia amongst the 774 births in Seascale associated with paternal preconceptional irradiation are attributable to an inherited etiology, the incidence in this group is 1 in 150. This implies a 200-fold increase in a dominantly inherited disorder in these Seascale children. Such a radiation-induced effect would not be expected to be confined to one outcome and if the same increase was operating for other gene mutations then an epidemic of genetic disease would be expected. If the same effect was being induced in the rest of West Cumbria which has 13 times the Seascale collective paternal preconceptional dose and 11 times the number of births associated with paternal irradiation exposure 58 such an increase is not
CHILDHOOD LEUKAEMIA AND RADIATION
17
likely to have gone unnoticed. Although no large scale study has yet been reported, Jones and Wheater99 found no increase in abnormal obstetric outcomes in Seascale. It is also inconceivable that such an effect would not have been observed in the offspring of the A-bomb survivors and indeed should also be detectable in areas of high background radiation.
ETIOLOGY AND HETEROGENEITY OF CASES Diagnostic information for Reay and Hope was examined for the purposes of the trial and the diagnoses agreed. For Dorothy Reay, who died in 1962, details were sparse and there were only a few poor quality haematological slides available for examination. Nevertheless it was agreed that this was a case of infant null acute lymphoblastic leukaemia. Evidence emerging around the time of the trial, and subsequently confirmed, identified a specific alteration of chromosome 11q23 involving the MLL (or HRX) gene in the vast majority of such cases.100 The mutational origin of this leukaemic event probably occurs in utero and is not therefore an inherited genetic change of the type postulated by the Gardner hypothesis. Furthermore Dorothy Reay was the one case of leukaemia amongst 1588 children born in West Cumbria outside Seascale to fathers who had received a preconceptional dose >100 mSv, 79 not an unexpected finding. More diagnostic information was available for Vivien Hope, including pathological material. During the course of the disease there had been no bone marrow involvement and it was agreed that this was a case of non-endemic (sporadic) Burkitt’s lymphoma. The etiology of Burkitt’s lymphoma has been well characterised.101 An important event is the translocation between chromosome 8 and chromosome 14 which results in myc oncogene activation. Unfortunately chromosome analysis was not undertaken in tumour tissue from Hope but in view of the diagnosis the expectation was that this event would have occurred. A hallmark of endemic Burkitt’s lymphoma is the association with early infection by Epstein-Barr virus (EBV), The polyclonal proliferation of EBV infected B cells remains unchecked particularly in areas associated with malaria. A transformed clone arises as a consequence of myc gene activation in one cell of this increased cell population. This somatic chromosome rearrangement is thought to arise as an accident of the normal developmental process of immunoglobulin gene rearrangement and is crucial to the parthenogenesis of Burkitt’s lymphoma. Although the role of EBV in the etiology of endemic Burkitt’s lymphoma is well established, the co-factor fulfilling a similar role in the etiology of non-endemic or spontaneous Burkitt’s lymphoma is unknown. Burkitt’s lymphoma has, however, been reported in patients who are immuno-suppressed as a result of HIV infection.102 Whatever the agent is that mimics the growth-promoting action of Epstein-Barr virus in non-endemic (sporadic) Burkitt’s lymphoma its action will likewise be somatic. Familial cases of Burkitt’s lymphoma have been reported in males with Xlinked immunodeficiency syndrome,103 a disorder characterised by a predisposition to EBV related disease. There was, however, no evidence that Hope suffered from this or any other inherited immunodeficiency disorder. Examination of the diagnostic details of the Seascale born leukaemia cases with paternal preconceptional irradiation in the Gardner Report indicates further diversity:59 two young children with an unknown subtype of ALL, one child with null AL, one young child with AML and a young adult with CML. This heterogeneity must raise questions when searching for a common etiology and distinct causative mechanism for the Seascale cases and the two cases which were the subject of the legal action.
18
E. JANET TAWN AND RICHARD WAKEFORD
ANIMAL STUDIES Support for a plausible mechanism to support the Gardner hypothesis had originally been drawn from the experimental work by Nomura on radiation-induced transgenerational carcinogenesis in mice. Nomura has recently reviewed his studies which date back to the 1970’s.104 The bulk of this work concerns the induction of lung adenomas in offspring of irradiated male mice. Unfortunately the experimental details provided give rise to queries with respect to the use of concurrent controls and the number of independent matings used for the heritability experiments. Examination of the data105 reveals small numbers in each dose and germ cell stage group and when lung adenomas are considered separately from total tumours the significance of the results is in doubt, at least for spermatogonial exposure. Furthermore Nomura had previously noted that tumour incidence was related to body size106 and yet there appears to have been no recognition of the possibility raised by P.B. Selby in evidence in the trial that the induction of dominant lethal mutations could have influenced litter size and hence size of the offspring. To date no studies have confirmed Nomura’s findings. A recent reanalysis of data from a lifespan study undertaken at Oak Ridge showed no increase in tumour incidence in offspring of irradiated mice107 and an attempt to repeat Nomura’s work by Cattanach et al., published after the trial,108 found that lung tumour incidence was not related to paternal radiation dose nor were there significant differences between germ cell stages irradiated. This latter work did, however, find that tumour rates in experimental and control groups varied in a cyclic way thus emphasising the necessity of concurrent controls for this type of study. In his more recent publications Nomura has reported data on leukaemia incidence in three different mouse strains.104,109 Numbers of leukaemias were small and in only one strain was there a significant increase following spermatagonial exposure. Even if taken at face value this increase, from 1 in 244 in the control offspring to 9 in 229 following 5.04 Gy spermatogonial exposure109 implies an induced mutation rate of per Sv which is still orders of magnitude lower than that deduced from the Seascale leukaemia cases. Furthermore the dose in these experiments was acute and a dose rate factor of 3 should be applied for comparison with the chronic exposure received by the Seascale fathers. Transgenerational carcinogenesis has been observed following chemical exposure110 but the interpretation of these experiments is difficult111,112 and positive effects following preconceptional maternal exposure may in some cases be attributable to transplacental transfer of the carcinogen to the fetus rather than to induction of a germ cell mutation.
DOSE RATE EFFECTS The biological effect of a given dose can be greatly influenced by the dose rate. For low LET radiation, as the dose rate is lowered and the exposure time becomes more protracted, the effect of a given dose is reduced. A dose and dose rate effectiveness factor is therefore commonly applied when deriving risk estimates for both somatic and genetic (i.e. heritable) risks for low dose low dose rate low LET radiation from high dose acute exposure data. For high LET radiation little or no dose rate effect is observed, this being consistent with the damage caused by high LET radiation resulting from a single densely ionising track. In contrast damage caused by low LET radiation can be the result of the interaction of more than one initial lesion and protraction of dose can allow the separation of these in time, thus allowing repair to occur (for review see Hall).113
CHILDHOOD LEUKAEMIA AND RADIATION
19
In recent years evidence has emerged that for high LET radiations protracting the exposure may lead to an increase in biological effect. This led to speculation that the association between paternal exposure and leukaemia observed in Seascale could be due to such an inverse dose rate effect. However the majority of these studies have involved oncogenic transformation assays on somatic cells in vitro and in general the enhanced effect seldom exceeds a factor of 2. Brenner and Hall114 have developed a model which is consistent with this experimental data and indicates that the results are heavily influenced by cell cycle kinetics. When this model is applied to the agreed neutron doses of the two fathers of the legal cases i.e. 11 mGy (220 mSv) and 3.5 mGy (70 mSv) dose rate effectiveness factors are derived of 3.5 and 1.5 respectively. Furthermore, examination of the doses of the Seascale case fathers indicates no neutron dose greater than 5 mSv and on the Brenner-Hall model no inverse dose rate effect would be expected. There is thus no evidence that the large discrepancy between the Seascale findings and the A-bomb data can be reconciled in this way. Perhaps more importantly in view of the postulated germline effect, in vivo experiments on neutron irradiation of mice spermatogonia115 demonstrated an inverse dose rate effect only at high doses and this can be explained by a greater incidence of cell killing.
UNCONVENTIONAL GENETIC MECHANISMS In the absence of evidence pointing to conventional mutation as an explanation for the Gardner hypothesis, consideration has been given to the possibility of other radiation genetic or epigenetic events which could be responsible.116 These were examined during the trial. One such phenomenon is transposon mediated mutation. Transposable genetic elements can change their positions within the genome and have been shown to be implicated in mutations of the haemophilia A gene.117 However, in man, such events are extremely rare and there is no evidence, to date, that the transposition of DNA elements is effected by radiation. Further speculation has centred round the possible involvement of sequence elements characterised by tandem repeats. These minisatellite regions occur throughout the genome and are highly polymorphic making them ideal markers for personal identification. The high rate of spontaneous mutation resulting in a change in repeat copy number has led to suggestions that minisatellite mutations could be used for population monitoring of germline mutations. Minisatellite mutations have been shown to occur at high frequency in the offspring of male mice following spermatid irradiation but the evidence for spermatogonial irradiation is less persuasive.118,119 Following the Judgment, Dubrova et al. 120 have found the frequency of minisatellite mutations to be twice as high in families from Belarus exposed to contamination from the Chernobyl accident compared to a UK control group. Mutation rates correlated with levels of thus giving support to a causal link although it was recognised that other environmental contaminants could also be involved. The authors acknowledge that the limited target size would rule out the possibility that the increase in mutations is due to direct damage to minisatellite DNA, a more likely explanation being that non-targeted effects stimulate minisatellite instability. A similar study in families of the Japanese A-bomb survivors has, however, failed to show increased mutation frequencies.121 It has yet to be established if minisatellite mutations play a role in the causation of human disease. Krontiris122 has suggested that minisatellite mutations could affect gene expression, and thus cell transformation, but the role of minisatellite DNA in normal cellular function remains unclear. In any event, in the context of the Seascale cases, any proposed role in transgenerational radiation-induced leukaemia is unlikely to have been confined to one village.
20
E. JANET TAWN AND RICHARD WAKEFORD
The role of fragile sites in malignancy has also come under scrutiny. These regions of chromosomal instability are revealed under certain in vitro cell culture conditions and although an association with the sites of somatic chromosome exchanges seen in leukaemia has been observed, no functional relationship has been demonstrated.123 The sequencing of the fragile site associated with X-linked mental retardation has shown the disease to be associated with an amplification of repeat DNA sequences.124 Expansion of trinucleotide repeat sequences has also been observed in other inherited diseases, e.g. Huntingdon’s chorea and myotonic dystrophy124 but to date there is no evidence of an association with the haemopoietic disorders associated with leukaemia. Nor is there any suggestion that radiation can induce fragile sites in germ cells or preferentially damage pre-existing fragile sites. A recently recognised epigenetic phenomenon is genomic imprinting. This acts at the gamete level and is the result of parental origin causing differential expression of the two alleles of a gene. Imprinting has been implicated in a number of human diseases, the best documented being deletion of chromosome 15q11-3 which results in Prader-Willi syndrome when the origin of the deleted chromosome is paternal and Angelman syndrome when the deleted chromosome originated maternally.125 Parent-of-origin effects have been reported for the Philadelphia chromosome,126 a somatic exchange which occurs in chronic myeloid leukaemia, but this interpretation has now been refuted127 and whether imprinting plays a role in leukaemia initiation is still unknown. In any event, to date, imprinting has not been shown to be either modified or induced by radiation. Susceptibility to the induction of spontaneous and induced somatic mutations is likely to be influenced by a range of mechanisms affecting, for example, the fidelity of DNA replication and repair, genomic surveillance and chromatin configuration. Similarly the induction of genomic instability or a mutator phenotype which then enhances the likelihood of further progression to malignancy will be affected by factors involved in apoptosis (programmed cell death) and the maintenance of genomic integrity. There is no evidence to suggest, however, that inherited radiation-induced genetic changes affecting any of these processes will occur at the orders of magnitude needed to explain the excess of leukaemia cases in Seascale nor that the results of such events would result only in haemopoietic malignancies.
THE LEGAL JUDGMENT AND AFTERMATH Judgment was given in the cases of Hope and Reay BNFL in October 1993.128 The Judge concluded “In my judgment, on the evidence before me, the scales tilt decisively in favour of the Defendants and the Plaintiffs, therefore, have failed to satisfy me on the balance of probabilities that ppi [paternal preconceptional irradiation] was a material contributory cause of the Seascale excess, or, it must follow, of (a) the leukaemia of Dorothy Reay or (b) the non-Hodgkin’s lymphoma of Vivien Hope” “In the result, there must be judgment for the Defendants”. A review of the evidence has been published.129 Although arguably the Court is not the best place to settle scientific controversy the legal cases focused the minds of a number of highly reputable scientists and accelerated the scientific investigation of the Gardner hypothesis. Subsequent events have not challenged the Judge’s decision but rather reinforced the view that paternal preconceptional irradiation cannot be responsible for the excess of childhood leukaemia in Seascale. In a comprehensive review, Doll et al.89 stated “In our opinion, the hypothesis that irradiation of the testes causes detectable risk of leukaemia in subsequent offspring cannot be sustained”. “We conclude that the association between paternal irradiation and leukaemia is largely or wholly a chance finding”. In contrast, epidemiological evidence
CHILDHOOD LEUKAEMIA AND RADIATION
21
for a role of infection in childhood leukaemia has grown. In particular, the hypothesis put forward by Kinlen130,131 that unusual population mixing induces unusual patterns of infection which increase the risk of childhood leukaemia has obtained considerable support. That such a process might apply to Seascale, an extremely unusual community in terms of social class composition, isolation and population mixing, is highly attractive. The 1993 report from UNSCEAR74 which considered hereditary effects of radiation, reviewed radiation genetic risks in the context of the Gardner Report and concluded that since no epidemic of genetic diseases has been reported around Sellafield or other nuclear sites it is highly unlikely that the conclusions of Gardner et al.35 are correct. In 1994 UNSCEAR132 reviewed epidemiological studies concerning the incidence of leukaemia around nuclear sites, thus adding to the assessment of the genetic implications of the Gardner hypothesis and concluded “A tentative explanation based on an association of childhood leukaemia and paternal exposure has largely been discounted following extensive investigations of the Sellafield area and elsewhere and because there is no sound genetic basis for this effect”. The COMARE Fourth Report133 has re-examined the Seascale leukaemia cluster in the light of epidemiological and dosimetric data and the advances in radiobiology and radiation genetics that have emerged since the report of the Black Advisory Group.1 The Committee confirmed again the significantly raised level of malignancies among young people in Seascale reported in the Black Report for the period 1963-83 and note that this has continued in the later period of study from 1984-92. This is primarily due to an excess of lymphoid leukaemia and non-Hodgkin’s lymphoma. Once more NRPB has carried out a detailed radiological assessment for the Seascale population134 leading COMARE to confirm that discharges from Sellafield could not account for the excess. In reviewing the hypothesis put forward by Gardner et al.,35 that paternal occupational radiation exposure had resulted in germ cell mutations leading to a material increase in the risk of childhood leukaemia, the Committee have stated “We have not found any epidemiological study elsewhere to support Gardner’s findings in Seascale in relation to preconception radiation effects” and “the level of risk implied by this explanation is inconsistent with the radiation doses actually received via occupational exposure and current estimates of genetic risk”. “We consider that ppi [paternal preconceptional irradiation] cannot account for the Seascale childhood leukaemia excess.” Whilst recognising that questions still remain on microdosimetry and mechanisms of biological response, particularly in relation to radionuclides incorporated in the germ cells, and recommending further research in these areas, the Committee acknowledge that it is unclear how these uncertainties could apply only to the village of Seascale. The COMARE Fourth Report133 also examined and dismissed a role for environmental exposure to chemicals. The Committee recognised that Kinlen’s hypothesis of population mixing130 which facilitates an infectious mechanism could play a role in the excess of childhood leukaemia in Seascale, but was not convinced that this could be the sole cause. The possibility that a combination of factors might account for the increase in cancer in Seascale was also examined but, while unable to rule this out, it was difficult to envisage a situation whereby such an interaction would be unique to Seascale. The cause of the Seascale leukaemia cluster remains unresolved. The Yorkshire Television programme in 1983 focused attention on the nearby Sellafield installation and although radioactive discharges were discounted as a causal factor, when Gardner et al.35 reported the association with paternal preconceptional irradiation this appeared to substantiate the link. The emotive nature of the media coverage caused considerable anxiety to the Sellafield workforce who were suddenly informed that in doing their daily work, and being exposed to radiation at levels within the limits recommended by ICRP and NRPB, apparently they were materially putting their children’s health at risk.
22
E. JANET TAWN AND RICHARD WAKEFORD
Unfortunately the media sensationalism also influenced the scientific literature and the statistical association between paternal preconceptional irradiation and childhood leukaemia was treated by some as being causal when a more rational appraisal would have demonstrated the implausible implications of this view. As a consequence there was a considerable amount of personal anxiety, and an expensive and lengthy Court action. It could also be argued that concentration on Seascale has deflected resources from addressing the wider issues of leukaemia etiology and causation. For the sake of science and humanity it is to be hoped that in future when a study yields a most unusual result it will be interpreted with the caution it deserves until the full implications have been evaluated and it receives independent confirmation.
ACKNOWLEDGEMENTS We thank Lynda Buckland, Anne Poyner and Chris Beresford for preparation of the manuscript.
REFERENCES 1.
2. 3.
4.
5.
6.
7.
8. 9.
10.
Independent Advisory Group (Chairman: Sir Douglas Black), Investigation of the Possible Increased Incidence of Cancer in West Cumbria, HMSO, London (1984). J.W. Stather, A.D. Wrixon, J.R. Simmonds, The risks of leukaemia and other cancers in Seascale from radiation exposure, NRPB-R171, (1984). D. Crouch, Science and trans-science in radiation risk assessment: child cancer around the nuclear fuel reprocessing plant at Sellafield, Sci. of the Total Env., 53: 201-216 (1986). J.W. Stather, J. Dionian, J. Brown, T.P. Fell, C.R. Muirhead, The risks of leukaemia and other cancers in Seascale from radiation exposure, Addendum to report R171, NRPB-171 Addendum, (1986). Committee on Medical Aspects of Radiation in the Environment (COMARE), First Report, The implications of the new data on the releases from Sellafield in the 1950’s for the conclusions of the Report on the Investigation of the Possible Increased Incidence of Cancer in West Cumbria, HMSO, London (1986). M.J. Gardner, A.J. Hall, S. Downes, J.D. Terrell, Follow up study of children born elsewhere but attending schools in Seascale, West Cumbria (schools cohort), Br. Med. J., 295: 819-822 (1987). M.J. Gardner, A.J. Hall, S. Downes, J.D. Terrell, Follow up study of children born to mothers resident in Seascale, West Cumbria (birth cohort), Br. Med. J., 295: 822-827 (1987). M.A. Heasman, I.W. Kemp, J.D. Urquhart, R. Black, Childhood leukaemia in Northern Scotland, Lancet, 1: 266 (1986). E. Roman, V. Beral, L. Carpenter, A. Watson, C. Barton, H. Ryder, D.L. Aston, Childhood leukaemia in the West Berkshire and Basingstoke and North Hampshire District Health Authorities in relation to nuclear establishments in the vicinity, Br. Med J., 294: 597-602 (1987). Committee on Medical Aspects of Radiation in the Environment (COMARE), Second Report, Investigation of the possible increased incidence of leukaemia in young people near the Dounreay nuclear establishment, Caithness, Scotland, HMSO, London (1988).
CHILDHOOD LEUKAEMIA AND RADIATION 11.
12. 13. 14.
15. 16.
17. 18. 19. 20.
21. 22. 23. 24. 25. 26.
27.
28. 29.
23
Committee on Medical Aspects of Radiation in the Environment (COMARE), Third Report, Report on the incidence of childhood cancer in the West Berkshire and North Hampshire Area, in which are situated the Atomic Weapons Research Establishment, Aldermaston and the Royal Ordnance Factory, Burghfield, HMSO, London (1989). M.D. Hill, J.R. Cooper, Radiation doses to members of the population of Thurso, NRPB-R195, (1986). J. Dionian, C.R. Muirhead, S.L. Wan, A.D. Wrixon, The risks of leukaemia and other cancers in Thurso from radiation exposure, NRPB-R196, (1986). J. Dionian, S.L. Wan, A.D. Wrixon, Radiation doses to members of the public around AWRE Aldermaston, ROF Burghfield and AERE Harwell, NRPB-R202, (1987). S.L. Wan, A.D. Wrixon, Radiation doses from coal-fired plants in Oxfordshire and Berkshire, NRPB-R203, (1988). P.J. Cook-Mozaffari, F.L. Ashwood, T. Vincent, D. Forman, M. Alderson, Cancer incidence and mortality in the vicinity of nuclear installations England and Wales 1959-80 Studies on Medical and Population Subjects No 51, HMSO, London (1987). D. Forman, P. Cook-Mozaffari, S. Darby, G. Davy, I. Stratton, R. Doll, M. Pike, Cancer near nuclear installations, Nature, 329: 499-505 (1987). R. Wakeford, K. Binks, D. Wilkie, Childhood leukaemia and nuclear installations, J. R. Statist. Soc. A., 152: 61-86 (1989). B. MacMahon, Leukaemia clusters around nuclear facilities in Britain, Cancer Causes Control, 3: 283-288 (1992). P. Cook-Mozaffari, S.C. Darby, R. Doll, D. Forman, C. Hermon, M.C. Pike, T.J. Vincent, Geographical variation in mortality from leukaemia and other cancers in England and Wales in relation to proximity to nuclear installations, Br. J. Cancer, 59: 476-485 (1989). P. Cook-Mozaffari, S. Darby, R. Doll, Cancer near potential sites of nuclear installations, Lancet, 2: 1145-1147 (1989). M. J. Gardner, Review of reported increases of childhood cancer rates in the vicinity of nuclear installations in the UK, J. R. Statist. Soc. A., 152: 307-325 (1989). J.W. Stather, R.H. Clarke, K.P. Duncan, The risk of childhood leukaemia near nuclear establishments, NRPB-R215, HMSO, Chilton (1988). T.E. Wheldon, The assessment of risk of radiation-induced childhood leukaemia in the vicinity of nuclear installations, J. R. Statist. Soc. A., 152: 327-339 (1989). S.C. Darby, R. Doll, Fallout, radiation doses near Dounreay, and childhood leukaemia, Br. Med. J., 294: 603-607 (1987). S.C. Darby, J.H. Olsen, R. Doll, B. Thakrar, P. deN. Brown, H.H. Storn, L. Barlow, F. Langmark, L. Teppo, H. Tulinius, Trends in childhood leukaemia in the Nordic countries in relation to fallout from atmospheric nuclear weapons testing, Br. Med. J., 304: 1005-9 (1992). S. Jablon, Z. Hrubec, J.D. Boice, Cancer in populations living near nuclear facilities, A survey of mortality nationwide and incidence in two states, JAMA, 265: 1403-1408(1991). C. Hill, A. Laplanche, Overall mortality and cancer mortality around French nuclear sites, Nature, 347: 755-757 (1990). J-N. Hattchouel, A. Laplanche, C. Hill, Leukaemia mortality around French nuclear sites, Br. J. Cancer, 71: 651-653 (1995).
24
E. JANET TAWN AND RICHARD WAKEFORD
30.
J. Michaelis, B. Keller, G. Haaf, E. Kaatsch, Incidence of childhood malignancies in the vicinity of (West) German nuclear power plants, Cancer Causes Control, 3: 255-263 (1992). J.R. McLaughlin, E.A. Clarke, E.D. Nishri, T.W. Anderson, Childhood leukaemia in the vicinity of Canadian nuclear facilities, Cancer Causes Control, 4: 51-58 (1993). L.A. Walter, B. Turnbull, G. Gustafsson, U. Hjlmars, B. Anderson, Detection and assessment of clusters of a disease and application to nuclear power plant facilities and childhood leukaemia in Sweden, Stat. Med., 14: 3-16 (1995). J-F. Viel, D. Pobel, A. Carre, Incidence of leukaemia in young people around the La Hague nuclear waste reprocessing plant: a sensitivity analysis, Stat. Med., 14: 2459-2472 (1995). J.F. Bithell, S.J. Dutton, G.J. Draper, N.M. Neary, Distribution of childhood leukaemias and non-Hodgkin’s lymphoma near nuclear installations in England and Wales, Br. Med. J., 309: 501-505 (1994). M.J. Gardner, M.P. Snee, A.J. Hall, C.A. Powell, S. Downes, J.D. Terrell, Results of case-control study of leukaemia and lymphoma among young people near Sellafield nuclear plant in West Cumbria, Br. Med. J., 300: 423-9 (1990). S. Abrahamson, Childhood leukaemia at Sellafield, Radial. Res., 123: 237-8 (1990). H.J. Evans, Ionising radiations from nuclear establishments and childhood leukaemias - an enigma, BioEssays, 12: 541-9 (1990). S.A. Narod, Radiation genetics and childhood leukaemia, Eur. J. Cancer, 26: 661-4 (1990). J.V. Neel, Update on the genetic effects of ionizing radiation, JAMA, 266: 698-701 (1991). K. Sankaranarayanan, Ionising radiation and genetic risks, IV, Current methods, estimates of risk of Mendelian disease, human data and lessons from biochemical and molecular studies of mutations, Mutat. Res., 258: 75-97 (1991). K.F. Baverstock, DNA instability, paternal irradiation and leukaemia in children around Sellafield, Int. J. Radiat. Biol., 60: 581-95 (1991). International Commission on Radiological Protection, 1990 Recommendations of the International Commission on Radiological Protection (ICRP Publication 60), Ann ICRP, 21: 1-3 (1991). A.B. Hill, The environment and disease : association or causation? Proc. R. Soc. Med., 58: 295-300 (1965). T. Ishimaru, M. Ichimaru, M. Mikami, Leukaemia incidence among individuals exposed in utero, children of atomic bomb survivors, and their controls : Hiroshima and Nagasaki 1945-79, Radiation Effects Research Foundation, Hiroshima, Tech Rep 11-81 (1981). K.S.B. Rose, Pre-1989 epidemiological surveys of low-level dose pre-conception irradiation, J. Radiol. Prot., 10: 177-184 (1990). X.O. Shu, Y.T. Gao, L.A. Brinton, M.S. Linet, J.T. Tu, W. Zheng, J.F. Fraumeni, A population-based case-control study of childhood leukaemia in Shanghai, Cancer, 62: 635-644 (1988). X. Shu, F. Jin, M.S. Linet, W. Zheng, J. Clemens, J. Mills, Y.T. Gao, Diagnostic Xray and ultrasound exposure and risk of childhood cancer, Br. J. Cancer, 70: 531-536 (1994).
31.
32.
33.
34.
35.
36. 37. 38. 39. 40.
41. 42.
43. 44.
45. 46.
47.
CHILDHOOD LEUKAEMIA AND RADIATION 48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60. 61.
62.
25
X. Shu, G.H. Reaman, B. Lampkin, H.N. Sather, T.W. Pendergrass, L.L. Robison & for the investigators of the Children’s Cancer Group, Association of paternal diagnostic X-ray exposure with risk of infant leukaemia, Cancer Epidemiol. Biomarkers Prev., 3: 645-653 (1994). Y. Yoshimoto, J.V. Neel, W.J. Schull, H. Kato, M. Soda, R. Eto, K. Mabuchi, Malignant tumours during the first 2 decades of life in the offspring of atomic bomb survivors, Am. J. Hum. Genet., 46: 1041-1052 (1990). M.P. Little, A comparison between the risks of childhood leukaemia from parental exposure to radiation in the Sellafield workforce and those displayed among the Japanese bomb survivors, J. Radiol. Prot., 10: 185-198 (1990). M.P. Little, A comparison of the apparent risks of childhood leukaemia from parental exposure to radiation in the six months prior to conception in the Sellafield workforce and the Japanese bomb survivors, J. Radiol. Prot., 11: 7790 (1991). J.D. Urquhart, R.J. Black, M.J. Muirhead, L. Sharp, M. Maxwell, O.B. Eden, D.A. Jones, Case-control study of leukaemia and non-Hodgkin’s lymphoma in children in Caithness near the Dounreay nuclear installation, Br. Med. J., 302: 687-692 (1991). P.A. McKinney, F.E. Alexander, R.A. Cartwright, L. Parker, Parental occupations of children with leukaemia in West Cumbria, North Humberside and Gateshead, Br. Med. J., 302: 681-687 (1991). J.R. McLaughlin, T.W. Anderson, E.A. Clarke, W. King, Occupational exposure of fathers to ionising radiation and the risk of leukaemia in offspring - a casecontrol study, AECB Report INFO-0424 (Ottawa Atomic Energy Control Board), (1992). J.R. McLaughlin, W.D. King, T.W. Anderson, E.A. Clarke, J.P. Ashmore, Paternal radiation exposure and leukaemia in offspring: the Ontario case-control study, Br. Med. J., 307: 959-966 (1993). M.P. Little, A comparison of the risks of leukaemia in the offspring of the Japanese bomb survivors and those of the Sellafield workforce with those in the offspring of the Ontario and Scottish workforces, J. Radiol. Prot., 13: 161-175 (1993). L.J. Kinlen, K. Clarke, A. Balkwill, Paternal preconceptional radiation exposure in the nuclear industry and leukaemia and non-Hodgkin’s lymphoma in young people in Scotland, Br. Med. J., 306: 1153-1158 (1993). L. Parker, A.W. Craft, J. Smith, H. Dickinson, R. Wakeford, K. Binks, D. McElvenny, L. Scott, A. Slovak, Geographical distribution of preconceptional radiation doses to fathers employed at the Sellafield nuclear installation, West Cumbria, Br. Med. J., 307: 966-971 (1993). L.J. Kinlen, Can paternal preconceptional radiation account for the increase of leukaemia and non-Hodgkin’s lymphoma in Seascale? Br. Med. J., 306: 17181721 (1993). Health and Safety Executive, HSE Investigation of leukaemia and other cancers in the children of male workers at Sellafield, HSE, London (1993). Health and Safety Executive, HSE Investigation of leukaemia and other cancers in the children of male workers at Sellafield: Review of the results published in October 1993, HSE, London (1994). M. Andersson, K. Juel, Y. Ishikawa, H.H. Storm, Effects of preconceptional irradiation on mortality and cancer incidence in the offspring of patients given injections of Thorotrast, J. Natl. Cancer Inst., 86: 1866-1870 (1994).
26 63.
E. JANET TAWN AND RICHARD WAKEFORD
M.P. Little, R. Wakeford, M.W. Charles, A comparison of the risks of leukaemia in the offspring of the Sellafield workforce born in Seascale and those born elsewhere in West Cumbria with the risks in the offspring of the Ontario and Scottish workforces and the Japanese bomb survivors, J. Radiol. Prot., 14: 187201 (1994). 64. M.P. Little, R. Wakeford, M.W. Charles, M. Andersson, A comparison of the risks of leukaemia and non-Hodgkin’s lymphoma in the first generation offspring of the Danish Thorotrast patients with those observed in other studies of parental preconception irradiation, J. Radiol. Prot., 16: 25-36 (1996). 65. E. Roman, A. Watson, V. Beral, S. Buckle, D. Bull, K. Baker, H. Ryder, C. Barton, Case-control study of leukaemia and non-Hodgkin’s lymphoma among children aged 0-4 years living in West Berkshire and North Hampshire health districts, Br. Med. J., 306: 615-621 (1993). 66. G.J. Draper, C.A. Stiller, R.A. Cartwright, A.W. Craft, T.J. Vincent, Cancer in Cumbria and in the vicinity of the Sellafield nuclear installation, 1963-90, Br. Med. J., 306: 89-94, 761 (1993). 67. A.W. Craft, L. Parker, S. Openshaw, M. Charlton, J. Newall, J.M. Birch, V. Blair, Cancer in young people in the North of England 1968-85: analysis by census wards, J. Epidemiol. Comm. Health, 47: 109-115 (1993). 68. R. Wakeford, L. Parker, Leukaemia and non-Hodgkin’s lymphoma in young persons resident in small areas of West Cumbria in relation to paternal preconceptional irradiation, Br. J. Cancer, 73: 672-679 (1996). 69. V. Beral, Leukaemia and nuclear installations: occupational exposure of fathers to radiation may be the explanation, Br. Med. J., 300: 411-412 (1990). 70. W.L. Russell, X-ray induced mutations in mice, Cold Spring Harbour Symp Quant. Biol., 16: 327-336 (1951). 71. K.G. Luning, A.G. Searle, Estimates of the genetic risks from ionising radiation, Mutat. Res., 12: 291-304 (1971). 72. W.L. Russell, L.B. Russell, E.M. Kelly, Radiation dose rate and mutation frequency, Science, 128: 1546-1550 (1958). 73. United Nations Scientific Committee on the Effects of Atomic Radiation, Sources, effects and risks of ionising radiation (UNSCEAR 1988 Report), New York, United Nations, (1988). 74. United Nations Scientific Committee on the Effects of Atomic Radiation, Sources and effects of ionising radiation (UNSCEAR 1993 Report), New York, United Nations, (1993). 75. J.V. Neel, W.J. Schull, A.A. Awa. C. Satoh, H. Kato, M. Otake, Y. Yoshimoto, The children of parents exposed to atomic bombs: estimates of the genetic doubling dose of radiation for humans, Am. J. Hum. Genet., 46: 1053-72 (1990). 76. J.V. Neel, S.E. Lewis, The comparative radiation genetics of humans and mice, Annu. Rev. Genet., 24: 327-62 (1990). 77. U.K. Ehling, Genetic risk assessment, Annu. Rev. Genet., 25: 255-89 (1991). 78. K. Sankaranarayanan, Genetics effects of ionising radiation in man, Ann. ICRP, 22: 75-94 (1991). 79. R. Wakeford, E.J. Tawn, D.M. McElvenny, L.E. Scott, K. Binks, L. Parker, H. Dickinson, J. Smith, The descriptive statistics and health implications of occupational radiation doses received by men at the Sellafield nuclear installation before the conception of their children, J. Radiol. Prot., 14: 3-16 (1994).
CHILDHOOD LEUKAEMIA AND RADIATION 80.
81. 82.
83.
84. 85.
86.
87.
88.
89. 90.
91. 92. 93. 94. 95. 96.
97. 98.
27
R. Wakeford, E.J. Tawn, D.M. McElvenny, K. Binks, L.E. Scott, L. Parker, The Seascale childhood leukaemia cases - the mutation rates implied by paternal preconceptional radiation doses, J. Radiol. Prot., 14: 17-24 (1994). E.J. Tawn, Leukaemia and Sellafield: is there a heritable link?, J. Med. Genet., 32: 251-256 (1995). W.L. Russell, E.M. Kelly, Mutation frequencies in male mice and the estimation of genetic hazards of radiation in man, Proc. Natl. Acad. Sci. USA, 79: 542-4 (1982). K. Sankaranarayanan, Ionising radiation and genetic risks, III, Nature of spontaneous and radiation-induced mutations in mammalian in vitro systems and mechanisms of induction by radiation, Mutat. Res., 258: 75-97 (1991). J. Thacker, Radiation-induced mutation in mammalian cells at low doses and dose rates, Adv. Radiat. Bioi., 16: 77-124 (1992). C.A. Felix, D. D’Amico, T. Mitsudomi, M.M. Nau, F.P. Li, J.F. Jr. Fraumeni, D.E. Cole, J. McCalla, G.H. Reaman, J. Whang-Peng et al., Absence of hereditary p53 mutation in 10 familial leukaemia pedigrees, J. Clin. Invest., 90: 653-8 (1992). G.J. Draper, General overview of studies of multigeneration carcinogenesis in man, particularly in relation to exposure to chemicals, In: Perinatal and multigeneration carcinogenesis, N.P. Napalkow, J.M. Rice, L. Tomatis, H. Yamasaki, eds. Lyon: International Agency for Research on Cancer, pp275-88 (1989). M.M. Hawkins, G.J. Draper, D.L. Winter, Cancer in the offspring of survivors of childhood leukaemia and non-Hodgkin lymphomas, Br. J. Cancer, 71: 1335-9 (1995). C.A. Stiller, P.A. McKinney, K.J. Bunch, C.C. Bailey, I.J. Lewis, Childhood cancer in ethnic groups in Britain, a United Kingdom childrens cancer study group (UKCCSG) study, Br. J. Cancer, 64: 543-8 (1991). R. Doll, H.J. Evans, S.C. Darby, Paternal exposure not to blame, Nature, 367: 67880 (1994). A.M. Ford, S.A. Ridge, M.E. Cabrera, H. Mahmoud, C.M. Steel, L.C. Chan, M. Greaves, In utero rearrangements in the trithorax-related oncogene in infant leukaemias, Nature, 363: 358-60 (1993). T.H. Rabitts, Chromosomal translocations in cancer, Nature, 372: 143-9 (1994). J.M. Adams, S. Cory, Transgenic models of tumour development, Science, 254: 1161-6 (1991). N. Heisterkamp, G. Jenster, D. Kioussis, P.K. Pattengale, J. Groffen, Human bcr-abl gene has a lethal effect on embryogenesis, Transgenic Res., 1: 45-53 (1991). R. Weinberg, Tumour suppressor genes, Science, 254: 1138-46 (1991). A.G. Knudson, Hereditary cancer oncogenes, and antioncogenes, Cancer Res., 45: 1437-43 (1985). G.M. Taylor, G.M. Birch, The hereditary basis of human leukaemia, In: Leukaemia 6th ed, E.S. Henderson, T.A. Lister, M.F. Greaves, eds. W.B. Saunders Co. USA pp 210-245 (1996). D. Malkin, p53 and the Li-Fraumeni syndrome [Review], Cancer Genet. Cytogenet., 66: 83-92 (1993). J.V. Neel, Problem of “false positive” conclusions in genetic epidemiology: lessons from the leukaemia cluster near the Sellafield nuclear installation, Genet. Epid., 11: 213-233 (1994).
28 99.
100. 101. 102.
103. 104. 105.
106. 107.
108.
109
110. 111.
112.
113. 114.
115. 116. 117. 118.
E. JANET TAWN AND RICHARD WAKEFORD K.P. Jones, A.W. Wheater, Obstetric outcomes in West Cumberland Hospital: is there a risk from Sellafield? J. R. Soc. Med., 82: 524-7 (1989). M. Greaves, Infant leukaemia biology, aetiology and treatment, Leukaemia, 10: 372-377 (1996). G. de The, The etiology of Burkitt’s lymphoma and the history of the shaken dogmas, Blood Cells, 19: 667-673 (1993). M. Subar, A. Ner, G. Inghirami, D.M. Knowles, R. Dalla-Favera, Frequent c-myc oncogene activation and infrequent presence of Epstein-Barr virus genome in AIDS - associated lymphoma, Blood, 72: 667-671 (1988). M. Tibebu, A. Polliack, Familial lymphomas, a review of the literature with report of cases in Jerusalem, Leukaemia and Lymphoma, 1: 195-201 (1990). T. Nomura, Paternal exposure to radiation and offspring cancer in mice: reanalysis and new evidences, J. Radiat. Res. Suppl., 2: 64-72 (1991). T.Nomura, Role of DNA damage and repair in carcinogenesis, In: Environmental Mutagens and Carcinogens, T. Sugimura, S. Kondo, H. Takebe, Liss, eds New York, pp 223-230 (1982). T. Nomura, Sensitivity of a lung cell in the developing mouse embryo to tumour induction by urethan, Cancer Res., 34: 3363-3372 (1974). G.E. Cosgrove, P.B. Selby, A.C. Upton, T.J. Mitchell, M.H. Stell, W.L. Russell, Lifespan and autopsy findings in the first generation offspring of X-irradiated male mice, Mutat. Res., 319: 71-9 (1993). B.M. Cattanach, G. Patrick, D. Papworth, D.T. Goodhead, T. Hacker, L. Cobb, E. Whitehill, Investigation of lung tumour induction in BALB/cJ mice following paternal X-irradiation, Int. J. Radiat. Biol., 67, 5: 607-615 (1995). T. Nomura, Further studies on X-ray and chemically induced germ-line alternations causing tumours and malformations in mice, In: Genetic Toxicology of Environmental Chemicals, part B: Genetic Effects and Applied Mutagenesis, C. Ramel, ed Alan R. Liss, New York, pp13-20 (1986). L. Tomatis, Transgenerational carcinogenesis: A review of the experimental and epidemiological evidence, Jpn. J. Cancer Res., 85: 443-454 (1994). P.B. Selby, Experimental induction of dominant mutations in mammals by ionising radiations and chemicals, In: Issues and Reviews in Teratology 5, H. Kalter, ed Plenum, New York, 181-253 (1990). V.S. Turosov, E. Cardis, Review of experiments on multigenerational carcinogenicity: of design, experimental models and analyses, In: Perinatal and Multigeneration Carcinogenesis, N.P. Napalkov, J.M. Rice, L. Tomatis, H. Yamasaki, eds IARC Lyon, ppl05-120 (1989). E.J. Hall, Radiobology for the Radiologist, J.B. Lippincott Company, New York, (1988). D.J. Brenner, E.J. Hall, The inverse dose dose-rate effect for oncogenic transformation by neutrons and charged particles: a plausible interpretation consistent with published data, Int. J. Radiat Biol., 58: 745-58 (1990). A.G. Searle, Mutation induction in mice, Adv. Radiat. Biol., 4: 131-207 (1974). R. Cox, Transgeneration carcinogenesis: are there genes that break the rules? NRPB Radiol. Prot. Bull., 129: 15-23 (1992). B.A. Dombroski, S.L. Mathias, E. Nanthakumar, A.F. Scott, H.J. Jr. Kazazian, Isolation of an active human transposable element, Science, 254: 1805-9 (1991). Y.E. Dubrova, A.J. Jeffrey, A.M. Malashenko, Mouse minisatellite mutations induced by ionising radiation, Nature Genetics, 5: 92-94 (1993).
CHILDHOOD LEUKAEMIA AND RADIATION
29
119. Y.J. Fan, Z. Wang, S. Sadamoto, Y. Ninomiya, N. Kotomura, K. Kamiya, K. Dohi, R. Kominami, O. Niwa, Dose-response of a radiation induction of a germline mutation at a hypervariable mouse minisatellite locus, Int. J. Radial. Biol., 68: 177-183 (1995). 120. Y.E. Dubrova, V.N. Nesteroc, N.G. Krouchinsky, V.A. Ostapenko, R. Nenmann, D.L. Neil, A.J. Jeffreys, Human minisatellite mutation rate after the Chernobyl accident, Nature, 380: 683-686 (1996). 121. M. Kodaira, C. Satoh, K. Hiyama, K. Toyama, Lack of effects of atomic bomb radiation and genetic instability of tandem-repetitive elements in human germ cells, Am. J. Hum. Genet., 57: 1275-1283 (1995). 122. T.G. Krontiris, Minisatellites and human disease, Science, 269: 1682-1683 (1995). 123. G.R. Sutherland, R.N. Simmers, No statistical association between common fragile sites and non-random chromosome breakpoints in cancer cells, Cancer Genet. Cytogenet., 31: 9-15 (1988). 124. R.I. Richards, G.R. Sutherland, Dynamic mutations: a new class of mutations causing human disease, Cell, 70: 709-12 (1992). 125. J.G. Hall, Genomic imprinting: Review and relevance to human diseases, Am. J. Genet., 46: 857-873 (1990). 126. O.A. Haas, A. Argyriou-Tirita, T. Lion, Parental origin of chromosomes involved in the translocation t(9:22), Nature, 359: 414-6 (1992). 127. T. Floretos, N. Heisterkamp, J. Groffen, No evidence for genomic imprinting of the human BCR gene, Blood, 83: 3441-4 (1994). 128. Reay v British Nuclear Fuels plc; Hope v British Nuclear Fuels plc (QBD: French J), Medical Law Reports, 5: 1-55 (1994). 129. R. Wakeford, E.J. Tawn, Childhood leukaemia and Sellafield: the legal cases, J. Radiol. Prot., 14: 293-316 (1994). 130. L.J. Kinlen, Epidemiological evidence for an infective basis in childhood leukaemia, Br. J. Cancer, 71: 1-5 (1995). 131. L.J. Kinlen, M. Dixon, C.A. Stiller, Childhood leukaemia and non-Hodgkin’s lymphoma near large rural construction sites, with a comparison with Sellafield nuclear site, Br. Med. J., 310: 763-768 (1995). 132. United Nations Scientific Committee on the Effects of Atomic Radiation, Sources and effects of ionising radiation (UNSCEAR 1994 Reports), New York: United Nations, (1994). 133. Committee on Medical Aspects of Radiation in the Environment (COMARE), Fourth Report, The incidence of cancer and leukaemia in young people in the vicinity of the Sellafield site, West Cumbria: Further studies and an update of the situation since the publication of the report of the Black Advisory Group in 1984, HMSO, London, (1996). 134. J.R. Simmonds, C.A. Robinson, A. Phipps, C.R.I. Muirhead, F.A. Fry, Risks of leukaemia and other cancers in Seascale from all sources of ionising radiation exposure, NRPB-R276, (1995).
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
Timothy E. Valentine Instrumentation and Controls Division Oak Ridge National Laboratory P. O. Box 2008 Oak Ridge, TN 37831-2008
I. INTRODUCTION Point kinetics models are commonly used to evaluate certain accident scenarios for nuclear reactors which, along with other safety analyses, provide the basis for the design of the reactor control and safety systems. However, the validity of the point kinetics models is a relevant issue if the results of these safety analyses are to be credible. Rod oscillator experiments1 have been performed in the past to determine reactor kinetics parameters. Other techniques such as varying coolant temperature or flow rate have been employed to change the reactivity of a reactor to investigate the kinetic behavior of a reactor core.2 Although these methods provide a direct measure of the reactor transfer function, they require a reactor perturbation. Noise techniques have been applied for over 40 years to determine reactor parameters. Analyses of the measured noise statistics (auto-or crosspower spectral densities) provide quantities that are directly related to the reactor transfer function. The early work by de Hoffman3 and Courant and Wallace4 analyzed neutron fluctuations for reactors operating at zero power. The number of neutrons from fission fluctuates about an average value that results in local variations in the neutron flux. The distance a neutron travels between collisions is random and results in stochastic fluctuations of the neutron population. The type of neutron event (fission, absorption, etc.,) is also random and results in momentary fluctuations in the neutron flux. In 1958, Moore5 suggested that measurements of the fission rate autocorrelation of a reactor operating at steady state could be used to determine the reactor transfer function. An application of this technique was performed by Conn6 in 1959 at Argonne National Laboratory. Cohn measured the autocorrelation of an ionization chamber output to obtain the reactor transfer function and performed a least squares fit to the transfer function to obtain a value of Similar analyses have also been performed at other facilities. The use of these techniques to estimate reactor parameters led to the development of stochastic models to study the fluctuations in the neutron populations.7,8 These theories modeled the probabilities of various neutron events in the reactor and obtained the moments of these probability
Advances in Nuclear Science and Technology, Volume 25 Edited by Lewins and Becker, Plenum Press, New York, 1997
31
32
TIMOTHY E. VALENTINE
distribution functions. In 1968, Zolotar9 performed the first Monte Carlo analysis using stochastic models. Zolotar developed a one-speed Monte Carlo code to simulate fluctuations in the neutron populations for a bare reactor and to estimate parameters of the probability distributions. In doing so, Zolotar demonstrated that the Monte Carlo techniques could estimate parameters of the probability distributions that could be compared with point reactor models. Since Zolotar’s analyses, little had been done to use Monte Carlo techniques for noise analysis calculations until the development of the codes KENO-NR10 and MCNPDSP11. This work highlights a unique synthesis of noise analysis techniques with the Monte Carlo method. The time dependent nature of the Monte Carlo simulation is ideally suited for performing noise and/or correlation calculations. Explicit modeling of detectors in the Monte Carlo simulations allow for the direct calculation of time dependent detector responses. With the development of the Monte Carlo codes KENO-NR and MCNP-DSP, noise analysis measurements using neutron and/or gamma ray detectors can be simulated. Although these codes were originally developed to calculate source-driven noise analysis measurements,12 they can also be applied to a number of noise analysis simulations, and in particular, the determination of reactor transfer functions for steady-state reactor configurations. This article describes how noise analysis techniques incorporated into a Monte Carlo neutron transport code can be used to either investigate the applicability of point reactor kinetics transfer functions or, alternatively, to develop a more sophisticated model for the reactor transfer function. This article also demonstrates how noise analysis techniques can be used to determine the time delay between core power production and external detector response, an important parameter for design of the reactor control and safety systems. This manuscript describes the reactivity and source transfer functions obtained from the point reactor kinetics models and how the source transfer function is estimated using noise analysis techniques; it describes how noise analysis parameters may be estimated using Monte Carlo calculational models; and it presents an application of these techniques to a conceptual design of the Advanced Neutron Source (ANS) reactor.13 Finally, some conclusions are drawn about the applicability and limitations of these methods.
II. REVIEW OF STATISTICS OF STOCHASTIC PROCESSES Before proceeding to a detailed discussion of estimation of noise statistics it is necessary to briefly review the statistics of stochastic processes. A random physical phenomenon cannot be explicitly described by mathematical relationships because each observation of the phenomenon will be unique and any given observation will only represent one of the many possible states of the process.14 The collection of all possible states of the random or stochastic process is called an ensemble. Properties of a stochastic process are estimated by computing averages over the ensemble that is characterized by a probability density function, The probability density function describes the probability that the process will assume a value within some defined range at any instant of time.14 To determine the statistics of a stochastic process, knowledge of the probability density is required. For example, the mean value of an ensemble of random variables x(t) is the expectation value
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS The autocorrelation
33
of x(t) is the expectation of
where is a joint probability density function. The joint probability density function describes the probability that both random processes will assume a value within some defined pair of ranges at their respective times and 14 Likewise, the crosscorrelation between two random variables x(t) nda y(t) is
14 where is a joint probability density function for and A stochastic process is stationary if the statistics are independent of time. Therefore, the mean value is a constant and the correlation functions depend only on the difference in time, The complication of estimating the statistics of a stochastic process is greatly simplified if the process is ergodic. A stochastic process is ergodic if its ensemble averages equal appropriate time averages. In practice, random data representing stationary physical phenomena are generally assumed to be ergodic. For a stationary ergodic process, the mean value can be estimated as
the autocorrelation of the random variable x(t) is
and the cross-correlation between two random variables x(t) and y(t) is
For stationary ergodic processes, Eqs. 2.4 through 2.6 are equivalent to Eqs. 2.1 through 2.3. References 14 and 15 provide a detailed treatment of the statistics of random processes. In practice, the mean and the correlation functions are calculated from time averages of finite length and are estimated from discrete time signatures. The mean value is estimated from
where N is the number of points and autocorrelation is estimated as
is a discrete sample of x(t) at time
The
34
TIMOTHY E. VALENTINE
where n is the lag index. The cross-correlation is estimated as
By taking the expectation of Eq. 2.7, the expected value of the estimate of mean value of x can be shown to be the same as the true mean value. Likewise, the expected values of the estimates of the correlation functions can be shown to be the same as the true values of the correlation functions. These estimates are unbiased estimates of the statistics of the random process. Although the estimates are unbiased, there is a variance associated with the estimates that depends on the number of discrete samples of the signal, N. The variance of the estimates approaches zero as N approaches infinity. The statistics of random processes are also described in terms of frequency domain quantities. Spectral density functions are the frequency domain equivalent of the correlation functions. Like the cross-correlation function the cross-power spectral density (CPSD) between x and y represents the amount of common information between x and y. In general, the CPSD is a complex quantity because the cross-correlation function is not an even function. Likewise, the auto-power spectral density (APSD) is the Fourier transform of the auto-correlation. The CPSD may defined as the discrete Fourier transform of the cross-correlation function
where k is the frequency index, n is the lag index, and N is the number of discrete samples of the correlation function.
III. REACTOR TRANSFER FUNCTIONS 3.1 Introduction Classic reactor transfer function measurements attempt to relate fluctuations in reactivity to fluctuations in the neutron population. These fluctuations in reactivity are induced by oscillating control rods or otherwise perturbing the reactor to measure reactordynamic parameters. The point reactor kinetics equations are commonly used to describe the reactor transfer function for small fluctuations about an equilibrium condition although the use of space-dependent neutron dynamics has grown rapidly for analysis of reactor transients. However, there are other reactor transfer functions that can be measured and do not require a perturbation of the reactor and that may be compared to theoretical models for validation. The source transfer function can be obtained for a steady-state reactor configuration with time-dependent sources. In a subcritical reactor, a neutron source is needed to maintain the neutron flux at a quasi-static level. If the nuclear parameters of a subcritical reactor are assumed to remain invariant with respect to time and inherent noise
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
35
contributions are negligible, the fluctuations in the neutron production are mainly due to fluctuations in the neutron source. Uhrig16 has described how noise techniques can be used to obtain the source transfer function or impulse response of the subcritical reactor for a steady-state configuration. The nuclear parameters are then obtained by fitting the measured transfer function with an appropriate model. The general idea of this work is to incorporate noise analysis techniques in Monte Carlo calculations to obtain the source transfer function. However, because Monte Carlo calculations represent the full space, time, and energy dependence of the neutron populations, Monte-Carlo-estimated transfer functions can not only be compared to the point reactor kinetics transfer function but can also provide the basis for a more sophisticated kinetics model. This section reviews the point kinetics representation of the source transfer function. This section also describes how the Monte-Carlo-calculated transfer function is related to the point reactor kinetics equations and how the Monte Carlo transfer function is estimated from the noise spectra. Some frequency dependent features of the noise spectra are also discussed and their use in analyzing the applicability of point kinetics to describe the source transfer function is described. 3.2 Point Kinetics Transfer Function The point kinetics equations used to describe the dynamic behavior of a subcritical fissile assembly are17
and
where n(t) is the neutron density, is the i’th precursor density, is the total delayed neutron fraction, is the reactivity, is the neutron generation time, is the decay constant of the i’th precursor, is the delayed neutron fraction of the i’th precursor, and s(t) is the neutron source density. For reactivity oscillation analyses, the neutron density, precursor density, and the reactivity are assumed to fluctuate about their average values,
and where the average values are assumed to be equal to equilibrium values. By substituting these expressions into Eqs. 3.1 and 3.2 and assuming the oscillations are sufficiently small such that the product of is negligible, one obtains the following linearized equations for the fluctuating components,
36
TIMOTHY E. VALENTINE
and
Taking the Laplace transform of Eqs. 3.4 and 3.5 and combining the resulting algebraic equations yields
where
is the Laplace transform of and Therefore, the reactivity transfer function is simply
is the Laplace transform of
A similar derivation may be performed to obtain the source transfer function. For a steady-state subcritical reactor at a constant reactivity, the neutron density will fluctuate about its quasi-static level due to fluctuations in the neutron source. As before, the neutron, precursor, and source densities can be assumed to be composed of an average value and a fluctuating component while the reactivity is treated as a constant. After performing similar substitutions and algebraic manipulations as those required to obtain the reactivity transfer function, one obtains the following expression for the source transfer function
where is the Laplace transform of Comparing Eqs. 3.7 and 3.8 the reactivity transfer function can be shown to be related to the source transfer function by
Because current Monte Carlo calculations do not include delayed neutrons, they are not included in comparisons of the point reactor kinetics models and the Monte Carlo calculated models for the source transfer function. The introduction of delayed neutrons is not necessary because this is a steady-state analysis and the delayed neutron contribution is most significant for transient analyses. For transient analyses, the delayed neutron contribution could be calculated analytically and the prompt transfer function could be estimated from the Monte Carlo simulations. The source transfer function without delayed neutrons is
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
37
In some measurements and in the Monte Carlo calculations, fission detectors are used to analyze the fluctuations in the neutron population; therefore, the fluctuations in the neutron population must be converted to fluctuations in the neutron production rate. The fission rate is related to the neutron population by
where l is the neutron life time, is the macroscopic fission cross-section, and is the macroscopic absorption cross-section. The neutron production rate is By substitution of the standard definitions for k and the neutron production rate is expressed as
Therefore, the transfer function relating the neutron production to the neutron source is
This transfer function may be compared with the Monte Carlo calculated transfer function. 3.3 Reactor Transfer Functions from Noise Analysis Techniques As previously mentioned, the idea of obtaining the reactor transfer function from steady-state operation of a reactor is not new; this idea was first proposed by Moore and demonstrated experimentally by Cohn. The early work employed correlation techniques to determine the reactor transfer function. These techniques and their frequency domain equivalent are discussed in this section. A subcritical reactor with a source driving function and a fission detector can be considered as a linear single-input single-output system. The output, o(t), is related to the input, i(t), via the convolution integral
where h(t) is the impulse response of the system. The transfer function can be obtained from the cross-correlation between the input and output. The cross-correlation function is the expectation value
Rearrangement of integration and expectation yields
where
38
TIMOTHY E. VALENTINE
The cross-power spectral density (CPSD) between the input and the output is
where is the reactor transfer function and is the auto-power spectral density (APSD) of the input. The APSD of a Poisson-distributed white noise source is a constant function of frequency. The CPSD between the source and a fission detector is given by
where A is the value of the APSD of the source and is proportional to the source disintegration rate, and we have substituted in the expression for the transfer function, Eq. 3.13. If the point reactor kinetics models are applicable, the real part of the CPSD is positive because the reactivity is less than zero for a subcritical reactor. This property of the CPSD is useful for determining the applicability of the point reactor kinetics model. If two identical fission chambers are used to measure the fluctuations in the neutron production, the CPSD between the two detectors can be used to ascertain if the source and detectors can be considered a single-input dual-output system. For a single-input dualoutput system, the CPSD between two detectors with identical transfer functions, can be expressed as
where is the APSD of the input. Note that because all the terms in the CPSD are real the phase of the CPSD between the two detectors is zero. In experiments, zero phase in the measured CPSD between the two detectors verifies the assumption that the transfer function between the source and a detector is the same for both detectors. This is useful for determining if all symmetric modes are measured by all detectors.
IV. TIME DELAY ESTIMATION
The time delay between core power production and external detector response is one of the most important parameters in the design of control and safety systems of reactors with external detectors. In the event of a rapid core power change, the control and safety systems must respond quickly to mitigate the possibility of a severe excursion. Noise analysis algorithms incorporated into Monte Carlo calculations can also be used to estimate time delay between core power production and external detector response. The external detector response can be considered as the output of a single-input single-output system whose input is the neutron production in the reactor core. The time delay can be estimated from the phase of the CPSD between the input and the output. Estimation of the time delay in this manner is equivalent to pulsed neutron measurements as will be shown. As previously mentioned, the output of the system is related to the input via the convolution integral
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
39
If the output is a fraction, g , of the delayed input, the impulse response is
where D is the delay time, and is the Dirac delta function. Therefore, the output is simply The cross-correlation between the input and the output is
where
is the input autocorrelation. The CPSD between the input and the output is
Consequently, the phase of the CPSD is
Therefore, the delay is
where f is the frequency in hertz. In this manner, the phase of the CPSD between core power production and external detectors may be used to estimate the time required for neutrons produced in the core to reach the external detectors.
V. MONTE CARLO SIMULATION 5.1 Introduction
The Monte Carlo method can be formulated in terms of an integral form of the Boltzmann transport equation or from a physical viewpoint. One integral form of the Boltzmann transport equation commonly used for describing the estimation of the average neutron behavior in an assembly is the emergent particle density equation,18
where P denotes the phase space, is the emergent particle density (density of particles emerging from a collision or a source), is the kernel, and S(P) is the source term. This equation is a Volterra-type integral equation that may be solved using a Neumann series approach. The random walk procedure is implemented by representing the emergent particle density by a Neumann series,
where from
is the density of particles emerging from the nth collision and is determined
40
TIMOTHY E. VALENTINE
Using this formulation, the transport equation is solved by first tracking the source particles, to their first collision site to estimate The surviving first collision particles are then transported throughout the system to estimate the next collision sites. This process is repeated for a sufficient number of particle histories to obtain an estimate of which is then used to estimate some desired quantity such as a neutron capture in a detector. Although the integral form of the Boltzmann equation is useful for improving or modifying the standard random walk procedure, the random walk procedure can be simulated without even referring to the transport equation. Estimates of desired quantities are obtained by observing the behavior of a large number of individual radiation particles. Because actual particle transport is a stochastic process, the simulation should also be stochastic. All that is required for simulating particle transport is a probabilistic description of the particle emissions and interactions. With a description of the geometrical boundaries and the materials of the system, the particle distance to collision and interaction events can be randomly determined from the nuclear cross section data for the material. The Monte Carlo calculation is ideally suited for performing calculations of the higher moments like CPSDs of the neutron transport process in a fissile assembly because the variations of the neutron events are probabilistic in nature. Because typical biasing techniques are employed to reduce the variance of estimates of first moment quantities, they do not preserve the higher moments; therefore, analog Monte Carlo calculations must be performed when analyzing parameters which are directly related to the higher moments of the neutron populations. Because the use of average quantities reduces the statistical fluctuation of the neutron population, average quantities such as the average number of neutrons from fission are not used, instead, appropriate probability distribution functions are sampled. The Monte Carlo codes used for this type of analysis were developed to simulate a frequency analysis measurement that uses a source, which may be treated as a Poisson-distributed white noise source, and a variety of particle detectors to characterize fissile assemblies. The source is contained in an ionization chamber to detect each spontaneous fission. The source and detector responses are accumulated and the resulting sequences segmented into data blocks. A data block is a sample of the detector response for a specified period of time. The auto-and cross-power spectral densities are accumulated and averaged over many blocks of data. This measurement technique is used to characterize fissile materials and could be used to measure the transfer function of a reactor by measuring the CPSD between the source and radiation detectors placed near the core. There are two codes available to simulate the frequency analysis measurement. The first code is the Monte Carlo code KENO-NR which is a modified version of KENO-Va19 and uses group averaged neutron cross sections. This code calculates the auto- and cross-power spectral densities between a source and neutron detectors. The other code is MCNP-DSP which is a modified version of MCNP4a.20,TM MCNP-DSP is a continuous energy Monte Carlo code which calculates the auto- and cross-power spectral densities and auto-and cross-correlation functions between a source and radiation detectors for both neutrons and gamma rays. The Monte Carlo calculation does not impose limitations on the spatial dependence of the simulation except for the accuracy of representing physical systems. The only limitation of the energy dependence is that imposed by the cross section data files ™ MCNP is a trademark of the Regents of the University of California, Los Alamos National Laboratory.
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
41
whether continuous or group averaged and that imposed by the representation of the energy of neutrons and/or gamma rays from fission. 5.2 Monte Carlo Simulation This is a brief review of the basic random walk of particles in the Monte Carlo simulation. The reader is referred to Lux and Koblinger21 for a complete description of the Monte Carlo method. The Monte Carlo calculation typically proceeds by tracking a specified number of source particles and their progeny. However, in the KENO-NR and MCNP-DSP Monte Carlo calculations the tracking procedure consists of an additional outer loop over data blocks because the time and frequency statistics are averaged over many data blocks. The outer loop sets the current data block, and the inner loop tracks events following source fissions in the current data block. This is illustrated schematically in Fig. 5.1. The outer loop starts with nps=1. If nps is greater than the number of specified blocks to be accumulated (bks), then the final outputs are obtained. Otherwise, the number of source events per data block (nsdpb) is sampled from a Poisson distribution. The source particles and their progeny are then tracked until the particles are either absorbed or escape from the system. After all source particles for a given data block have been tracked, the block counter is incremented and the process repeats until all blocks have been accumulated. A block diagram of the inner loop structure is given in Fig. 5.2. The inner loop begins by obtaining information about the source event. The source is treated as a point source whose directional distribution is either isotropic or determined from an appropriate distribution function. The times of the source fission events are uniformly distributed within the data block. The energy of the neutrons are sampled from a corrected Maxwellian distribution. The number of neutrons from the spontaneous fission of are sampled from Spencer’s distribution.22 This information is stored in the bank for all but one
42
TIMOTHY E. VALENTINE
of the neutrons for the given source spontaneous fission. Next, the distance to the cell boundary is determined from the geometry description of the region and the direction of the source neutron, and the distance to collision is determined probabilistically from the total macroscopic cross-section of the material in which the source is located. If the distance to collision is shorter than the distance to the cell boundary, then the collision type and time are determined from the direction and velocity of the neutron; otherwise, the particle is transported to the boundary of the region and the process is repeated. The type of collision is probabilistically determined from the nuclear cross-section data. For example, the probability of fission event is determined from the ratio of the fission cross-section to the total cross-section. If a fission event occurs, the number of neutrons from fission are sampled from the appropriate probability distributions, the fission neutron directions are sampled isotropically, and their energies are sampled from the fission spectrum of the target nucleus. The birth time of the secondary particles is the sum of the source particle birth time and the transit time to the collision site. These progeny would then be stored in the bank to be tracked latter. If the collision event occurred in the detector material, the detector response at the time of collision is incremented. If the particle survives the collision, the distance to the cell boundary is recalculated along with the distance to collision and the process is repeated. If the particle is absorbed or causes fission, then the next particle from the bank is retrieved and the distance to the boundary and the distance to collision are determined for this particle. If there are no particles in the bank the inner loop counter is incremented. All particles are tracked until they are either absorbed or escape from the system. After all source and secondary particles for a given data block have been tracked, the detector responses are accumulated. This procedure is repeated for the specified number of data blocks to obtain average estimates of the detector responses. The APSDs and CPSDs are estimated from the detector responses by complex multiplication of the Fourier transform of the data blocks and averaged over blocks. 5.3 Detector Simulation
In these Monte Carlo calculations, the detector is specified by defining the detector material, type, and any energy thresholds. The detector response is segmented into time bins for each data block whose width is specified. There are three types of detectors available in these calculations: capture, scatter, and fission detectors. The detector response of capture detectors is due to neutron absorption followed by emission of secondary charged particles that ionize the detection media and produce an electrical pulse proportional to the kinetic energy of the secondary charged particle. In the Monte Carlo simulation, neutron absorption in the detector material results in a count at the appropriate time in the data block. In KENO-NR, all neutron absorptions in the detector media result in a count. In MCNP-DSP, a specified fraction of the neutron absorptions in the detector media lead to a count to allow for detector thresholds typically set in the measurements. Scattering detectors are those in which the detector response is due to neutron scattering in the detection media. These detectors are typically used to simulate liquid and/or plastic scintillators. To observe a count in a scattering detector, the neutron must deposit enough energy to the recoil nucleus to excite electrons in the scintillation material which produce light that is converted into an electrical pulse by a photomultiplier tube. In KENO-NR, the response of the scattering detectors is determined by the energy of the incident neutron. In MCNP-DSP, the response of the scattering detector is determined by the neutron energy deposition in the detection media and multiple scattering events of particles in the detectors are taken into account. The MCNP-DSP treatment is more realistic than the KENO-NR treatment of scattering detectors. In fission detectors, the fission fragments travel through the detection media ionizing the atoms in the detector. The large energy release per fission
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
43
allows for easy discrimination of other events that may also produce ionized atoms in the detector. In the calculations, a count is registered each time a fission occurs in the detection media, and the fission neutrons are stored for tracking. In MCNP-DSP, gamma rays can also contribute to the detector response for capture and scatter detectors if the calculation is a coupled neutron-photon calculation. VI. APPLICATION TO THE ADVANCED NEUTRON SOURCE REACTOR 6.1 Advanced Neutron Source (ANS) Reactor The ANS reactor was to be designed as an experimental facility for neutron research. Conceptual designs of the reactor included numerous facilities for neutron scattering analyses, materials irradiation, isotope production, and nuclear science studies. The reactor was designed to achieve a high flux in the reflector tank in order to perform unprecedented neutron scattering studies. To achieve the necessary flux, the conceptual designs consisted of a small compact reactor and a heavy water reflector. Figure 6.1 is a schematic of one ANS conceptual designs. In this design, two annular concentric fuel elements comprised the reactor core. The lower fuel element has a 200 mm id. and a 340 mm od., and the upper element has a 350 mm id. and a 470 mm od. Each fuel element consisted of involute fuel plates that were approximately 1.2 mm thick and spaced 1.2 mm apart. The plates were to be constructed of a highly enriched uranium silicide composite in an aluminum matrix. The silicide thickness varied radially. Uranium silicide was chosen because of its high density. In the following analysis, the two different diameter annular fuel elements were vertically displaced. Located in the inner region of the annular fuel
44
TIMOTHY E. VALENTINE
elements were three 71 mm od. hafnium control rods. The control rods were to be driven upward from the bottom of the reactor to the top of the reflector vessel to facilitate the fuel loading and removal. In-core irradiation facilities were located between the inner radius of the upper fuel element and control rods. A core pressure boundary tube separated the core coolant flow from the heavy water reflector. This would allow the large heavy water reflector region to be maintained at a low pressure relative to the core region pressure. Eight hafnium shutdown rods were located outside the core pressure boundary tube in the heavy water reflector. The shutdown rods would move down from the top of the reactor vessel, where they would be located during reactor operation, to the midplane of the reactor to affect shutdown of the reactor. The reflector vessel had a 3.5 m diameter and was approximately 4.3m high. A 1.3 m thick pool of light water surrounded the reflector vessel on the sides and was surrounded by a biological shield within the reactor building. In this design, eight beam tubes, two cold neutron sources, and one hot neutron source were located in the reflector vessel. 6.2 ANS Monte Carlo Model
The KENO-NR Monte Carlo model of this conceptual design of the ANS reactor was simplified significantly. The model used in these analyses consisted of the two annular fuel elements, three hafnium control rods, the heavy water reflector, and the light water pool. The tip of the inner control rods was positioned at the reactor midplane. The involute fuel plates of the annular fuel elements were not explicitly modeled. Instead, the annular fuel element models were comprised of 13 radial zones and 25 axial zones to represent the variations of the fuel density in the annuli. The beam tubes and cold and hot neutron sources were not modeled in some calculations. The source was positioned at the midplane on the axis of the reactor core to initiate the fission process. Part of the upper fuel element and part of the lower fuel element were treated as fission detectors. Calculations were performed at various radial positions of the external detectors (from approximately 400 mm to 2500 mm, the latter being the location of the external fission detectors). To increase the precision of the estimates of the noise statistics, the external detector was modeled as an annular ring of the relevant moderator for a given radial position that was 10 mm wide and 1080 mm high. Neutron scattering was the event scored as a detection. Modeling the detectors in this fashion decreased the calculation time by increasing the detector efficiency relative to that of a point detector. The presence of the structural components in the heavy water reflector reduce the core reactivity. To account for this negative reactivity, the neutron emission probabilities were arbitrarily reduced by 2% to produce a subcritical configuration rather than changing the control rod position. Variations to this model were also made for some calculations. In some calculations, the light water pool was replaced by a heavy water pool to determine the effects of the pool material on the calculated time delays. To account for the presence of the experimental facilities in the heavy water reflector, an amount of aluminum equivalent to the mass of aluminum in these experimental facilities was added to the heavy water reflector for some of the calculations. In the calculations which included the effect of the experimental facilities in the heavy water reflector, the neutron emission probabilities were not reduced. 6.3 ANS Reactor Transfer Function
The ANS reactor transfer function was estimated by dividing the CPSD between the source and fuel element fission detectors by the APSD of the source. This analysis was performed using reactor models both with and without the experimental facilities in the heavy water reflector modeled. The reactivity was obtained from the Monte Carlo
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
45
calculation and the neutron generation time was estimated by other calculations; these parameters were then used in point kinetics transfer function compared against the Monte Carlo calculated transfer function. For calculations which did not model the experimental facilities in the heavy water reflector, the reactivity was -0.0142, and the neutron generation time was 1.6 ms. This unusually large generation time is caused by the heavy water reflector. A comparison of the point reactor kinetics transfer function and the Monte Carlo calculated transfer function is shown in Fig. 6.2. There is excellent agreement between the Monte Carlo calculated transfer function and the prompt point kinetics transfer function for each annular fuel element. The presence of the experimental facilities in the heavy water reflector greatly reduces the reactivity. For the calculation which modeled the aluminum in the heavy water reflector, the reactivity was -0.0534, and the neutron generation time was 1.0 ms. In this calculation, the neutron emission probabilities were not reduced because the aluminum in the heavy water reflector significantly reduced the reactivity of the reactor. As expected, the neutron generation time was decreased when the aluminum was added to the heavy water reflector. A comparison of the Monte Carlo calculated transfer function with the point kinetics transfer function for the reactor with aluminum in the heavy water reflector is shown in Fig. 6.3. Once again, there is excellent
46
TIMOTHY E. VALENTINE
agreement between the Monte Carlo calculation and the point reactor kinetics model. Consequently, the preceding calculations demonstrate that point kinetics was applicable for these geometrical configurations of the ANS reactor. The applicability of point kinetics can also be verified by examining known properties of the CPSDs. For point kinetics to be applicable the real part of the CPSD between the source and the fuel element fission detector must be positive. Figure 6.4 illustrates that the CPSD real part between the source and the fuel element fission detector are indeed positive for all frequencies. The CPSD for the upper element has a greater value than the CPSD for the lower element because the upper fuel element has a higher concentration of than the lower fuel element. If the transfer function between the source and fuel element fission detector is the same for both fuel elements, the phase of the CPSD between the fuel element fission detectors must be zero. Furthermore, if the phase is zero, then the detected neutrons represent those of the fundamental mode, and the two fuel elements behave as one element. The phase of the CPSD between the two fuel elements is approximately zero as shown in Fig. 6.5. This was to be expected because the transfer functions between the source and the fuel element fission detectors are essentially the same. These properties of the power spectral densities have shown that point kinetics is applicable for this geometrical configuration of the ANS reactor and that the two vertically displaced annular fuel elements behave as one core. 6.4 ANS Calculated Time Delays
The time delay between core power production and the external detectors was estimated from the phase of the CPSD between the fuel elements and the external scattering detectors. These calculations were performed with and without aluminum in the heavy water reflector. The time delay was evaluated at several positions in the heavy water reflector and in the light water pool. The time delay increased as a function of distance from the core until it reached a saturation value in the light water pool. The results of the calculations are presented in Table 6.1 and are shown in Fig. 6.6. The time delay had a maximum (~ 18 ms) in the reflector and then decreased to 15 ms in the pool for the calculations that did not include the aluminum in the heavy water reflector. The decrease in the time delay is due to the fact that once a slowed-down neutron reached the light water pool it was absorbed locally due to hydrogen capture. The flight path of a neutron to a radial point is not a direct path but consists of many scattering paths in all directions while “diffusing” to the radial point. Therefore, the calculated time delay is the average flight time of thermal neutrons “diffusing” to each radial point. Because more neutron scattering occurred in the the average flight path was longer in the heavy water reflector; hence, the average flight time will be longer. Neutrons that have numerous scattering collisions in the may be scattered back into the core and would not contribute to the detector response in the light water pool. To further enhance understanding of this decrease in the time delay, a calculation was performed with the light water replaced by heavy water. For the case, the time delay increased with distance as shown in Fig. 6.7, thus confirming the effects of neutron absorption in the light water. Because the experimental facilities in the heavy water reflector were not modeled, the time delays were overestimated. Additional calculations were performed that included aluminum in the heavy water reflector. The aluminum in the heavy water reflector significantly reduced the time delays because neutrons that stayed in the heavy water reflector for relatively long periods could be absorbed by the aluminum. The results from these calculations for the three detector positions in the light water pool are given in Table 6.2. Including the aluminum in the heavy water reflector decreased the time delay to the external detectors by 5 ms. The time delay at the position of the external fission detectors is 10 ms.
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
47
48
TIMOTHY E. VALENTINE
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
49
50
TIMOTHY E. VALENTINE
REACTOR DYNAMICS FROM MONTE CARLO CALCULATIONS
51
VII. SUMMARY
Noise analysis and Monte Carlo methods are widely used in characterizing nuclear reactors. The combination of these two methods in the Monte Carlo codes MCNP-DSP and KENO-NR is unique and provides a useful tool for design of reactor safety and control systems. This article has demonstrated how Monte Carlo methods can be applied to investigate the applicability of point kinetics for steady-state reactor configurations or, alternatively, to provide a more detailed model for the reactor transfer function by computing the reactor transfer function from power spectral densities. The relationship between the point reactor kinetics transfer function and the Monte Carlo calculated transfer function was defined to compare the transfer functions obtained from the two models. Properties of the Monte Carlo calculated power spectral densities also provide additional means to investigate the applicability of point reactor kinetics. The phase of the CPSD between neutron detectors can be used to determine the time delay between core power production and external detector response. The time delay between core power production and the external detector response is essential to the design of reactor safety systems of a reactor. These Monte Carlo analyses apply to a specific steady-state configuration of the reactor and cannot be used to asses the applicability of point kinetics for other configurations or during reactor transients. Additional Monte Carlo calculations could be performed to investigate other reactor configurations. The Monte Carlo analysis was applied to a conceptual design of the ANS reactor to determine the applicability of point kinetics for the reactor operating in a steady-state configuration. This analysis has shown for the slightly subcritical configuration of the reactor that point kinetics is applicable and that the two vertically displaced annular fuel elements behave as one fuel element. If the point kinetics model for the reactor transfer function had not been applicable, the Monte Carlo calculated transfer function could have served as a model for the reactor transfer function. The reactor transfer function could be measured using source in an ionization chamber placed at the center of the core and a fission detector adjacent to the core. The Monte Carlo calculations also provided estimates of the time delay between core power production and the external detector response. For this conceptual design of the ANS reactor, the time delay between the core power production and the external detector response is approximately 10 ms if the aluminum equivalent of the heavy water reflector components is included in the Monte Carlo model. The estimate of the time delay without aluminum in the heavy water reflector is conservative and provided a limit for the design of the reactor safety systems. The time delay could also be obtained by measuring the CPSD between a detector near the core and external detectors.
Acknowledgment. The author is very grateful to his colleague J. T. Mihalczo for many discussions and advice regarding this work, and is indebted to J. K. Mattingly, R. B. Perez, and J. A. March-Leuba for their detailed review of this manuscript.
REFERENCES 1. 2.
Keepin, G. R., Physics of Nuclear Kinetics, Addison-Wesley Publishing Co. Inc., Reading, Massachusetts, (1965). Thie, J. A., Reactor Noise, Rowand and Littlefield, Inc., New York, New York, (1963).
52 3. 4. 5. 6. 7. 8. 9. 10.
11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
TIMOTHY E. VALENTINE de Hoffman, F., Intensity Fluctuations of a Neutron Chain Reactor, MDDC-382, LADC-256 (1946). Courant, E. D. and Wallace, P. R., “Fluctuations in the Number of Neutrons in a Pile,” Phy. Rev., 72, 1038 (1947). Moore, M. N., “The Determination of Reactor Transfer Functions from Measurements at Steady Operation,” Nucl. Sci. Eng., 3, 387 (1958). Cohn, C. R., “Determination of Reactor Kinetic Parameters by Pile Noise Analysis,” Nucl. Sci. Eng., 5, 331 (1959). Saito, K. and Otsuka, M., “Theory of Statistical Fluctuations in Neutron Distributions,” J. Nucl. Sci. Technol., 2, 304 (1965). Harris, D. R., “Neutron Fluctuations in a Reactor of Finite Size,” Nucl. Sci. Eng., 21, 369 (1965). Zolotar, B. A., “Monte Carlo Analysis of Nuclear Reactor Fluctuation Models,” Nucl. Sci. Eng., 31, 282 (1968). E. P. Ficaro and D. K. Wehe,"Monte Carlo Simulations of the Noise Analysis Measurements for Determining Subcriticality," Proceedings International Topical Meeting Advances in Mathematics, Computations and Reactor Physics, Pittsburgh, Pennsylvania, April 28-May 2, 1991, Vol. 1, p. 5.22.1, American Nuclear Society, 1991. Valentine, T. E. and Mihalczo, J. T., “MCNP-DSP: A Neutron and Gamma Ray Monte Carlo Calculation of Source Driven Noise-Measured Parameters,” Ann. Nucl. Energy, 23, 1271 (1996). Mihalczo, J. T., Pare, V. K., Ragen, G. L., Mathis, M. V., and Tillet, G. C., “Determination of Reactivity from Power Spectral Density Measurements with Californium-252,” Nucl. Sci. Eng., 66, 29 (1978). D. L. Selby, R. M. Harrington, and P. B. Thompson, The Advanced Neutron Source Project Progress Report, FY 1991, ORNL-6695, Oak Ridge National Laboratory, Oak Ridge, TN, January 1992. Bendat, J. S. and Piersol, A. G., Random Data Analysis and Measurement Procedures, John Wiley & Sons, New York, New York, (1986). Papoulis, A., Probability, Random Variables, and Stochastic Processes, McGraw-Hill Inc., New York, New York, (1984). Uhrig, R. E., Random Noise Techniques in Nuclear Reactor Systems, Ronald Press Co., New York, New York (1970). Henry, A. F., Nuclear Reactor Analysis, Massachusetts Institute of Technology, Cambridge, Massachusetts (1975). Carter, L. L. and Cashwell, E. D., Particle-Transport Simulation with the Monte Carlo Method, Energy Research and Development Administration, Oak Ridge, Tennessee, (1977). Petrie, L. M. and Landers, N. F. ORNL/NUREG/CSD-2, Oak Ridge National Laboratory (1984). Briesmeister, J. F., Ed., “MCNP4A-A Monte Carlo N-Particle Transport Code,” LA-12625-M, Los Alamos National Laboratory (1993). Lux, I. and Koblinger, L., Monte Carlo Particle Transport Methods: Neutron and Photon Calculations, CRC Press, Inc., Boca Raton, Florida (1991). Spencer, R. R., Gwin, R., and Ingle, R., “A Measurement of the Average Number of Prompt Neutrons for Spontaneous Fission of Californium-252,” Nucl. Sci. Eng., 80, (1982).
NOTES ON A SIMPLIFIED TOUR: FROM THE FOURIER TO THE WAVELET TRANSFORM
Marzio Marseguerra Dept. of Nuclear Engineering Polytechnic of Milan Italy
INTRODUCTION Any signal may, in principle, be viewed as resulting from a linear superposition (possibly an integral) of assigned elementary functions. If the set of these functions is sufficiently large the coefficients in the superposition constitute the transform of the signal. A classic example is given by Fourier analysis in which the elementary functions are sinusoids of different frequencies which may be viewed as generated by varying the frequency of an initial mother sinusoid. The wavelet transform may be similarly viewed: here the elementary functions are generated by the dilatations and translations of a mother function which may be selected with some degree of freedom provided it has reasonably good time and frequency localization features. It turns out that this mother function should also have zero mean so that it resembles a small wave: hence the name mother wavelet. An example of a mother wavelet is the derivative of a bell–shaped curve such as a Gaussian function. With respect to the Fourier analysis, a mother wavelet with a reasonably good localization both in time and frequency gives to the wavelet transform the so called zoom in and zoom out capability – i.e. the capability of resolving both the details and the trend of a signal – which represents the basis for a list of several applications. In recent years, particularly since the second half of the 1980s, a tremendous interest has emerged towards the application of wavelet analysis to different research areas which include both theoretical and applied aspects. Examples may be found in a variety of fields, ranging from functional analysis and digital multidimensional signal processing to image and sound analysis or to the biomedical domain. Important results have been achieved in specific applications such as digital video data compression, a very important subject in the telecommunication field, or turbulent flow, of interest to hydraulic, naval and aerospace engineers and to meteorologists. Correspondingly, a great deal of papers and books have been published in which
Advances in Nuclear Science and Technology, Volume 25 Edited by Lewins and Becker, Plenum Press, New York, 1997
53
54
MARZIO MARSEGUERRA
the theoretical aspects of the wavelet methodology have been deeply investigated with the aid of the whole arsenal of tools at the disposal of mathematicians. However, this scientific literature is generally written by specialists for specialists so that the mathematical demands of these sophisticated tools scale up considerably. Non– mathematicians hardly fully understand the matter and are often lost since in general they do not always have the clew of thread to get out of the labyrinth of theorems, propositions, lemmas, applicability conditions etc., required by rigorous mathematical reasoning. The present paper has been written mainly for an audience with a mathematical background at the engineering degree level; since it is devoted to people who work in applied areas, the so called theorem–structured way has been deliberately avoided, on account of the possibility that it might obscure the matter and discourage non– mathematicians from entering this new and fascinating field. A plain expository style has therefore been preferred, sometimes at the expenses of mathematical rigour, and the wavelets are presented as a succession of easily understandable analytical expressions. The present exposition is simply my understanding of a possible way for crossing the pillars of Hercules towards the wavelet sea. On the whole I followed, with some heuristic simplifications, the line of reasoning presented by G. Kaiser (1994) in the first part of his beautiful book A Friendly Guide to Wavelets which I systematically refer to for detailed explanations. Much of what is reported here I learned from Kaiser and an enormous intellectual debt is owed to him. Some parts are also borrowed from two other outstanding books, namely Ten Lectures on Wavelets by I. Daubechies (1992) (a book difficult for non–mathematicians, even though it received an AMS prize for exposition) and An Introduction to Wavelets by C. Chui (1992) (less difficult for non–mathematicians). I hope, the present paper will be of some help to professionals in engineering science for understanding specialized papers or up–to–date surveys such as those contained in the special issue on wavelets (1996) edited by and I. Daubechies. In essence, the purpose of this paper is to encourage engineers, and particularly nuclear engineers, to add the wavelet technique to the widely adopted Fourier methodology. The plan of the paper is as follows. Initially some preliminary mathematical notions are recalled; Section 2 then reviews the well established windowed Fourier transform; in Section 3 the concept of a frame is introduced; this concept is used in Section 4 where the continuous wavelet transform is introduced in a way which parallels that of the windowed Fourier transform; Sections 5 and 6 address the discrete versions of the above transforms; the multi–resolution analysis is presented in Section 7 and, finally, the link between the wavelets and the sub–band filtering is given in Section 8. At the end of the paper a list of essential references is given: comprehensive lists of up to date references on specific issues may be found, for example, in IEEE (1996).
1. PRELIMINARIES 1.1 Basis of a vector space Let us consider an M–dimensional vector space A standard basis in is a sequence of M column vectors such that all the elements of the generic vector are zeros except the element which is one, viz., where is the usual Kronecker–delta.
NOTES ON A SIMPLIFIED TOUR
55
A sequence of M linearly independent column vectors is a basis in if any column vector can be written as where is the component of along the vector When considering any two bases and in the vectors of one basis may be expressed as linear combinations of those of the other basis, viz., where is the component of along 1.2 Dual spaces and dual bases Consider the linear operator F which maps column vectors in to column vectors in viz. also written as Let and be any bases in and respectively. Then the result of applying F to a column vector is the column vector so expressed
where
is the component of the vector along the vector and Then, in the given bases, F is represented by a matrix of order (N, M) with elements and the application of F to is computed as a matrix product. Particular cases: i. M = 1, i.e. or The operator F is represented by a matrix of order (N, 1), i.e. by a column vector of order N. Since the matrix product of the (column) vector times the 1–dimensional vector (a scalar) is the (column) vector we may say that any (column) vector may be viewed as a linear operator mapping Formally: In words: when the N–dimensional (column) vector (regarded as an operator) operates on the 1–dimensional vector the result is the product of now viewed as a scalar in C, times ii. N = 1, i.e. or In the following we change symbols and write N instead of M. Thus the mapping here considered will be written as or The operator F, called a linear functional, is represented by a matrix of order (1, N), i.e. by a row vector of order N. The N– dimensional space spanned by these row vectors will be denoted by Since the matrix product of the (row) vector times the (column) vector is the 1–dimensional vector (a scalar) we may say that any (row) vector may be viewed as a linear operator mapping Given any basis (column vectors) of we may construct a basis (row vectors) of such that when operates on a vector the result is the component of with respect to the basis viz., Thus the row vector may be viewed as a linear functional. In particular, the vector composition rule (parallelogram rule) yields so that we have the so called duality relation Correspondingly, is called the dual space of and is the dual basis of In practice the basis vectors are given by assigning their components in the standard basis. In this basis the components of are the solutions to the system
56
MARZIO MARSEGUERRA Thus, the N algebraic systems(1.2) of N equations each, must be solved in order to get the whole sequence
1.3 Inner product Given
any inner product
must satisfy the following axioms:
where the overbar denotes complex conjugation. If are the components of and with respect to the standard basis, the standard inner product between and and the norm of are defined as and If the inner product vanishes we say that the two vectors are orthogonal. Clearly the concepts of orthogonality and length (square root of the norm) are relative to the choice of the inner product. More generally, a weighted inner product is defined as
1.4 Adjoints Given any inner products in and consider the operator F, represented by a matrix of order (N, M), which maps column vectors from to viz. The adjoint of F is defined as the operator F* which performs the inverse mapping
It can be shown that the adjoint F* of F exists and it is unique. The determination of the matrix representative of the operator F* is simple in case of orthonormal bases and in and respectively. In this case we have:
Multiplying the first equation by
and the second one by
yields
Application of the adjoint condition to one of the above equations, for example to the second equation, yields Thus the matrix representing F* is the Hermitian conjugate of the one representing F. A particularly interesting case of adjointness occurs when M = 1. Then becomes C. Let be any two 1–dimensional vectors in C. We choose as the inner product in We consider any as the operator (see eq.(1.1)) such that The adjoint of is the operator which performs the inverse mapping, i.e. the functional (row vector) For any and we get such that We also have so that
NOTES ON A SIMPLIFIED TOUR
57
Thus the inner product (a scalar) of any two (column) vectors in may be split in the (matrix) product of the adjoint (a row vector) of times This is a result of paramount importance and its generalization in the Hilbert space will be extensively used in the sequel.
1.5 Reciprocal basis Let us consider the space with a basis and let be the dual basis of We have seen that each row vector may be viewed as an operator performing the mapping The adjoint of is a column vector which may be viewed as an operator performing the inverse mapping, i.e. It can be shown that the sequence forms a new basis of this basis is called the reciprocal basis of The importance of the reciprocal basis stems from the fact that it allows us to compute the components of any vector in the given basis by taking an inner product, just as in the orthogonal case. Indeed from eq.(1.5) we get In the particular case of the above equation becomes But, since then and, finally The above represents a very important result: any given basis and its reciprocal basis are (mutually) orthogonal. Given any basis in we have seen that the vectors of the reciprocal basis are the adjoints of the vectors of the dual basis and that these may be computed from the by solving N systems (1.2). However, we may directly compute the from the of the original basis by resorting to the metric operator, defined as
and represented, e.g. in the standard basis, by a square matrix of order N. Indeed, from eqs.(1.5) and (1.6), we have
Thus
1
1.6 The resolution of unity The dual bases and linked by the duality relation (1.2), have the important property of resolution of unity. Since every can be written in the basis and since by definition of we have Regarding as an operator from and as an operator from then is an operator from i.e. from 1
The expression which follows is valid provided G is not singular. To this aim, given any define Then and Thus G is positive definite, and has, therefore, an inverse.
58
MARZIO MARSEGUERRA and we can write
so that the operator in brackets equals
the identity operator viz. or The above expressions are an example of a resolution of unity, also called resolution of identity. We would like to stress that in order to have a resolution of unity, we need either a pair of dual bases in and in or a pair of reciprocal bases and both in
2. THE CONTINUOUS WINDOWED FOURIER TRANSFORM 2.1 Introduction We are interested in analyzing a non–stationary, square integrable function of time aiming at resolving its frequency content along time. For example, with reference to a musical piece or to a speech, the problem amounts to identifying the time occurrence of a single note or phoneme. In nuclear engineering this problem occurs for example in the field of early detection of failures. This is an important issue since many major failures are preceded by the random occurrence of sudden, high frequency disturbances of short duration which should be detected and also detected as soon as possible. At first sight it might appear that a solution to these problems could be found within the classic Fourier approach by looking at the frequency content of the However, this approach does not generally solve the specific problem here considered. Indeed, since the Fourier Transform (FT) of a signal is usually computed after the signal has been measured during a time interval of suitable length, the frequency contributions due to single notes or to phonemes or to small disturbances of short duration are hidden in the bulk of the transform; moreover, in the Fourier approach, the signal is decomposed in the sum (actually, integral) of sinusoids having all possible frequencies whose amplitudes are fixed and related to the integral of the signal over the whole measurement time. In these integrals the time occurrence of a single note or phoneme or of a single short disturbance is lost, In this view, for example, a musical piece is considered as resulting from the superposition (constructive or destructive) of infinitely many pure notes, each generated by a musician who plays always the same note with same intensity (amplitude). In the mathematical language we say that the analyzing functions of the Fourier approach, namely the complex exponentials, suffer from lack of time localization. A possible way to circumvent this drawback of the Fourier approach was proposed by D. Gabor (1946) who introduced the so called Windowed Fourier Transform (WFT), also named short time FT, which is a sort of moving FT. In principle, for each time we consider only a suitably weighted portion of the signal near for example contained within a (possibly small) interval T preceding and perform the usual FT. By so doing, for each we obtain a function of the frequency in which the contributions of the sinusoids due to the rest of the signal outside T are missing and in which the various harmonics thereby computed are well localized since we know that they occurred within the time interval With reference to the above mentioned musical piece, each musician still plays the same note, but now changes the amplitude with time. The limits of the WFT approach will be discussed in Section 2.7.
NOTES ON A SIMPLIFIED TOUR
59
2.2 Notations In the following we shall proceed heuristically, thus skipping most of the subtleties of a rigorous mathematical approach. The main assumption is that the results so far obtained with reference to the N–dimensional vector space can be sensibly generalized to the case of an infinite dimensional Hilbert space 2. In this space we consider the set of measurable functions of time e.g. where and C are the sets of all real and complex numbers, respectively. The inner product between and and the norm of are (in the following, unless explicitly stated, all integrals run from to ):
In analogy with the finite dimensional case (see eq.(1.5)), the inner product will be often written in vectorial form. In these cases we see every as a bounded linear operator acting on in such a way that i.e. correspondingly, we define a bounded linear operator performing the inverse mapping such that The linear functional represents a particular case of an adjoint operator, defined similarly to eq.(1.4): given any two Hilbert spaces in correspondence of any bounded operator there exists a unique operator performing the inverse mapping such that
We will also generalize the basis of a vector space by introducing the concept of frame of a vector space. For the moment it is sufficient to say that a frame of vectors in a space represents a redundant reference system with more vectors than strictly necessary to form a basis: for example, in the bidimensional plane, three non collinear vectors form a frame. The rigorous definition of a frame will be given in the next section, when we rephrase in the frame language the results here obtained for the windowed Fourier transform. Concerning the FT, we consider the space of square integrable functions of one continuous variable which will be called time but which could equally be space, voltage, etc. Given a function of time its analysis is performed by the FT, viz.,
where is the frequency (Hz). The synthesis of is performed by the Inverse Fourier Transform (IFT) of viz.,
2
Recall that a Hilbert space is a linear vector space which is normed, complete and equipped with an inner product. The space is said to be complete if any Cauchy sequence converges to an when A sequence is called a Cauchy sequence if when both
60
MARZIO MARSEGUERRA
Both the above integrals are assumed to exist. i.e. if it has a compact support of length it is sufficient to know only in correspondence of the discrete sequence of frequencies ( where denotes the set of all integers) where Then the eqs.(2.2) and (2.1) become (in the following, if no limits are indicated in a summation sign, then is understood)
Moreover, a little algebra shows that
i.e. if for it is sufficient to know only in correspondence of the discrete sequence of times where This last condition follows from the requirement that the Nyquist frequency should be larger than or equal to the maximum frequency in Then the eqs.(2.1) and (2.2) become
Moreover, a little algebra shows that
2.3 The analysis of The idea underlying the WFT may be formalized by introducing a suitable window function which vanishes, or is negligible, outside an interval of length T near for example outside (–T , 0), and whose norm is To visualize the situation we may think of as a bell shaped curve or a rectangle starting at and ending at For completeness, we assume that may be a complex valued function, although in practice it is real. This window, suitably translated in time, will be used to localize in time 3. Then, for every instead of we consider the new function
and define the WFT of
3
as the usual FT of
Gabor (1946) selected a Gaussian curve for
viz.,
61
NOTES ON A SIMPLIFIED TOUR where whose FT is
In words, as a function of may be interpreted as a pure note located near which oscillates at the frequency within the envelope constituted by the carrier translated at More formally, eq.(2.7) shows that the family is constituted by a continuous sequence of vectors in doubly indexed by the time–frequency pair and eq.(2.6) shows that the WFT maps an defined in to an defined in the plane of the indexes. Since the family is obtained by translating and modulating with a complex exponential the window this window may be properly called the mother of all the notes and these may be written as
Since product
also
and eq.(2.6) may be written as an inner
where is the adjoint of Another expression for resorting to Parseval’s theorem, viz.,
The norm of
may be obtained by
is
where we have introduced the operator
This operator will be soon recognized as being the metric operator (see eq.(1.7)) of the WFT transform. Application of G to any and freely interchanging the integration orders, yields
so that
62
MARZIO MARSEGUERRA
Thus the operator G reduces to the norm of the window which is a positive constant, possibly equal to one if the window is normalized in energy. Then eq.(2.11) reads The above expression tells us that the univariate energy density per unit time of the signal namely is resolved in the bivariate energy density per unit time and frequency, namely 2.4 Time and frequency localization Assume that in addition to being well localized in time, is also well localized in frequency. In other words, assume that is a window function which vanishes outside a possibly small interval near Then the eqs.(2.6) and (2.10) allow understanding the time/frequency localization features of Indeed eq.(2.6) tells us that in correspondence of a given value, is related to the function of frequency resulting from Fourier transforming a portion of near More specifically, the frequency content of is limited to the frequency content of that portion of (weighted by translated at ) which belongs to the time length T of the window. The frequency content of this portion of not immediately evident from eq.(2.6), is better clarified by the companion eq.(2.10). This equation tells us that in correspondence of a given value, is related to the function of time resulting from an inverse Fourier transform of the portion of (weighted by translated at ) which belongs to the frequency interval of the window. In other words, the two equations (2.6) and (2.10), taken together, tell us that is related not to the whole frequency content of the portion of near but only to those frequency components of this portion portion which are near In conclusion, it can be said that if vanishes (or is very small) outside a small interval T and its Fourier transform vanishes (or is very small) outside a small frequency interval the WFT of namely provides good information on both the time and the frequency behaviour of In this respect it should be remembered that any window obeys an uncertainty principle which states that constant. This result agrees with our intuition according to which we must observe a signal during a finite time interval in order to estimate its frequency content during that interval. If that is if the window support then it is impossible to infer the frequency value of the signal at from the knowledge of the single value Analogously, if (in this case that is if the window support tends to the whole real axis, then independent of the WFT becomes the usual FT and any time localization is lost. 2.5 Reconstruction formula The WFT of a function taken with respect to a window eq.(2.6), reported below for convenience
or, in vectorial form
is given by
63
NOTES ON A SIMPLIFIED TOUR Inverse Fourier transforming, we get
Since the window vanishes everywhere except in the (small) time interval T near we cannot recover from the above expression. Instead we multiply eq.(2.17) by and integrate
Solving with respect to (IWFT):
we obtain the inverse windowed Fourier transform
where with G the operator defined by eqs.(2.12) or (2.13). Note that from the proportionality between and it follows that is also the mother of the family The two equations (2.15) and (2.18) represent the pair of windowed Fourier direct and inverse transforms of a function with respect to the window Substitution of eq.(2.16) in eq.(2.18), yields the vectorial form
which originates the continuous resolution of unity, viz.,
where I is the identity operator and where the second equation is obtained by taking the adjoint of the first one. Note that, from the definition (2.12) of G, eq.(2.21) may be written as Recall that in the discrete case described in §1.6, we have seen that a resolution of identity requires a pair of reciprocal bases, namely and Therefore, in analogy with the discrete case, we may say that and constitute a pair of reciprocal families. Moreover we also recall from §1.5 that the reciprocal vectors can be directly obtained by applying the inverse of the metric operator to the vectors (see eq.(l.8)). In the present case, eq.(2.19) indicates that the operator G, defined by eq.(2.13), does exactly the same job, so that actually it can be recognized as being the metric operator of the WFT. The resolution of unity is a useful expression for obtaining important relations. As a first example, eq.(2.14) may be easily obtained as follows
Since the integral at may be written as
is the norm of
in the space the equation We shall see in §3.2 that this
64
MARZIO MARSEGUERRA
expression means that the vectors form a continuous tight frame with frame bound C. A second, more important, example of application of the resolution of unity concerns the linear dependency among the vectors. Indeed multiplication of the second of eqs.(2.21) by shows that each may be expressed in terms of a linear integral operator acting on the others
where is the so–called reproducing kernel. The same situation occurs for the multiplying by from eq.(2.9) we have
Taking the adjoint of eq.(2.22) and
From eq.(2.22) it appears that the vectors are not independent so that they constitute a frame and not a basis. Correspondingly, the family may be said to constitute the reciprocal frame. 2.6 Consistency condition We have seen that the WFT of a function is the function We are now interested in investigating the inverse situation, namely in determining the conditions – called consistency conditions – under which a function is the WFT of a function Clearly not any such function can satisfy the consistency conditions since in that case we could select a function with arbitrary time–frequency localization features, thus violating the uncertainty principle. Let us call the proper subspace of such that any function is the WFT of a function It can be easily proved that a function is also if it satisfies the following consistency condition [write and substitute (2.20) for ]:
where is the reproducing kernel defined by eq.(2.23). In many instances we deal with a function which we only know to belong to Given a window we may equally use eq.(2.18) to perform its IWFT, viz., In general, if we take the WFT of we do not return to indeed, since is the proper subspace of (usually a small portion of the whole space in general We arrive instead to a function
NOTES ON A SIMPLIFIED TOUR
65
which represents the least square approximation to in This follows from a theorem which states that, among the WFT of all functions is the closest to in the sense that
The above situation is of interest for example when we try to reduce the noise in a given function To this aim we firstly perform the WFT of thus arriving at and then we modify the transform in correspondence of the pairs in a suitable domain (e.g. setting to zero the values below a certain threshold). By so doing becomes an generally however its IWFT, represents the least square approximation to the initial in the sense that their transforms are as close as possible in 2.7 Drawbacks of the WFT A distinct feature of the WFT is that the window has always the same size, independently of the local behaviour of the function to be analyzed. When we are interested in resolving the frequency content of along time, this feature represents a drawback of the procedure since it limits the usefulness of the approach in case of a wide–band, non–stationary signal. In this case the short duration details of the signal, i.e. its high frequency content, could be better investigated by means of a narrow window, whilst the analysis of the long term trends, that is the low frequency content, calls for a window with a wide support. Actually both kinds of windows should be simultaneously available since a narrow window looses the general trend while a wide one smears out the details of the signal. Thus the two kinds of windows complement each other and a collection of windows with a complete distribution of widths would be necessary. 3. FRAMES 3.1 Introduction In the present section we introduce the concept of a frame and show that the scheme thereby derived lends itself to easily obtaining the expressions relevant to transforms like that described in the preceding section. This approach is quite general, as it will be seen in the next sections where it is applied to the wavelet transform in a straightforward manner. 3.2 Continuous frames: definitions and main features In the framework of the WFT it has been shown (see eqs.(2.15) and (2.18)) that the analysis and the synthesis of a function are carried out by resorting to two families of vectors in – or, more generally, in – namely the family for the analysis and the reciprocal family for the synthesis, both indexed by the pair The analysis of (see eq.(2.15)) may be viewed as a continuous linear combination of the vectors with coefficients which gives rise to a function However, eq.(2.22) shows that the vectors are not independent and, correspondingly, from eq.(2.24) it appears that also the are not independent. Thus the family does not represent a basis
66
MARZIO MARSEGUERRA
in Intuitively speaking, we may say that, with respect to a basis, this family contains a redundant number of vectors which are said to represent a frame in In order to define the frame in a slightly more general scheme, in the following we shall consider two families of vectors in namely the family and its reciprocal family both indexed by where represents any 4. Generalizing the pair of continuous indexes belonging to a bidimensional set weighted inner product (1.3), different weights may be given to different by introducing a measure so that the integral of a function5 is We also denote by the set of square–summable functions with measure for which
Then is also a Hilbert space, called the auxiliary Hilbert space of The link between the new notations and the old ones relating to the WFT is
With the new notations, a frame may be so defined: A family of indexed vectors two constants A > 0 and the inner product
is called a frame in if there exist called frame bounds, such that for any satisfies the inequality constraint
The above expression is called the frame condition or also the stability condition since it compels within fixed limits, the ratio B/A representing a stability indicator; the closer to 1 is B/A, the more stable is If A = B we say that the frame is tight and the above condition becomes
At first sight the above definition of frame might appear a mathematical subtlety; that definition is instead the key for a deep and general understanding of the matter. Indeed the following consequences may be drawn from the above definition: i. The inner product representing a mapping from the space to the space may be viewed as performed by a frame operator (where is the range of T) so defined
so that We now introduce the adjoint T* of the operator T, which performs the inverse mapping 6, i.e. To obtain a formal expression for let us 4 5 6
The generalization to a multi–dimensional case is straightforward. We shall always consider honest, i.e. measurable, functions. Application of T* to implies returning to but not necessarily to in other
words, in general,
67
NOTES ON A SIMPLIFIED TOUR consider any two vectors
and
Then
and therefore, in a weak sense,
ii. In terms of the operators T and its adjoint T*, the norm of
is
where is the so called metric operator, which plays a role analogous to that defined in §1.5 for the discrete case. From the above definition it appears that G is Hermitian, self–adjoint and positive definite, so that it possesses an inverse The formal expression of G in terms of the frame vectors may be obtained by substituting eqs.(3.2) and (3.3) in the definition (3.5),viz.,
The frame condition (3.1) now plays its fundamental role: it guarantees that G and are both bounded. To see this, (3.4) is substituted in (3.1), viz.,
so that
and
and, finally and
which indicate that G and are both bounded 7. Then, in correspondence of any the vectors belong to and inner products involving them are admissible. iii. We now define the reciprocal vectors as
Then, from eq.(3.6) we get
7 In case of a tight frame with A = B = 1 the metric operator reduces to the identity operator, i.e. G = I.
68
MARZIO MARSEGUERRA which is the resolution of unity for the case at hand. In vectorial form, the resolution of unity and its adjoint are
iv. The above item iii. illuminates the fundamental role played by the inverse metric
operator for obtaining the reciprocal vectors. Unfortunately, in many instances, we are not able to find an explicit expression for the inverse of a given G. Nevertheless we may obtain good estimates for by resorting to the first inequality in (3.8). This inequality tells us that G may be expressed as the mean of the two bounds AI and BI, plus a remainder. A suitable expression for G is
Then and Substitution of (3.11) in (3.8) yields Since the series converges in norm to and then In practice A and B are reasonably close to each other so that the above series converges rapidly to its limit and thus it may be well approximated by a few terms. In case of a tight frame, namely A = B, the situation is quite simple: from eq.(3.8) we get G = AI and then In this case the reciprocal vectors are proportional to the frame vectors and both families of vectors have the same mother. v. We are now in a position to derive the reconstruction formula for Indeed, defining the operator from eq.(3.5) one has Then the reconstruction formula reads
so that S is the left inverse of T.
or, written in length (see eqs.(3.3) and (3.9)),
In summary, in order to reconstruct from its transform we resort to the reciprocal vectors which, in turn, are immediately obtained from the once is computed. The expression (3.12) shows that, actually, the operator S performs the inverse mapping of any vector to a vector However, this does not mean that if we apply the direct mapping T to the so obtained we should necessarily return to In other words, not necessarily equals since the operator TS performs the orthogonal projection from to the range of the operator T 8 . If then TS 8
Proof: any vector
may be decomposed in the sum of a vector
plus a component in the orthogonal complement The operator TS projects in itself and gives rise to a zero vector in when applied to Indeed consider any and let vanishes, viz. expression implies
To show that Then the inner product of Since is any vector in and, finally,
of
times this
NOTES ON A SIMPLIFIED TOUR
69
3.3 Discrete frames We shall now consider the case in which the set of continuous indexes is replaced by a discrete set constituted by a grid of points taken from Then the integral of a function over is replaced by the sum
and the norm of F is where is the weight of the single point possibly equal to unity. The frame condition (3.1) becomes
4. THE CONTINUOUS WAVELET TRANSFORM 4.1 Introduction The drawbacks concerning the time and frequency localization capability of the WFT mentioned in Section 2.7 are substantially reduced by the use of the wavelet transform technique. As in the Fourier approach, one starts with a window function called the mother wavelet, which takes the place of the mother the word wavelet is added since, besides the usual requirements of a finite norm and of a good time and frequency localization, the function should also have zero mean. These requirements imply that must exhibit an oscillatory behaviour along the small time interval in which it is localized (where it is sensibly different from zero); then it must resemble a short wave or a wavelet. In general may be a complex valued function, but in practice it is a real function. Analogously to the pure (musical) notes considered in the Fourier case, we construct a set of functions called wavelets, which are versions of the mother wavelet scaled by and translated by t, viz., 9
whose Fourier transform is
In eq.(4.1), the scale factor in the argument of represents a dilatation or a compression of the mother wavelet according to whether respectively; negative values of indicate also a reflection of the wavelet around the ordinate axis. The scale in bears a strong similarity to the inverse of the frequency appearing in the pure notes of the WFT: an increase of represents a dilatation of and, analogously, a decrease in represents a dilatation of the sinusoids within The difference between the two is that when is varied, the support of remains constant, whilst that of varies with being larger at larger 9
Since the whole family is obtained from a single function to be structured.
the basis is said
70
MARZIO MARSEGUERRA
scales and viceversa. As we shall see, this feature represents the basis for the zoom capability of the wavelet approach. Moreover, from eq.(2.8) we see that the FT of is related to the FT of at a frequency translated by from eq.(4.2) we see that the FT of is instead related to the FT of at a frequency multiplied by This difference is in favour of the wavelet approach since the filtering in the frequency domain is generally performed in terms of octaves, so that frequency multiplications by a fixed factor are preferable to frequency translations by a fixed amount.
4.2 The direct and inverse transforms The wavelet transforms will now be obtained as described in the general procedure given in Section 3 with the following change of notations
Firstly we find the condition under which the family constitutes a frame. Given any we define the Continuous Wavelet Transform (CWT) as the inner product (this product exists since so that
where is the frame operator (see eq.(3.2)). The CWT (or the frame operator T) performs a mapping from the space to the space having measure ds dt where is a weight function to be suitably defined later. The link between the norm of and that of is given by eq.(3.4), viz.,
where G is given by eq.(3.6), which now reads
The wavelet family constitutes a frame provided G is a bounded operator: in that case G is the metric operator of the wavelet approach (see eq.(3.9)). To see that G is bounded, we apply G to any Freely exchanging the integration orders yields
Substituting eq.(4.1), the factor in brackets becomes
NOTES ON A SIMPLIFIED TOUR
71
so that
The second integral on the In this case we have
does not depend on
provided we define
and eq.(4.5) reads and, finally, since is any function in we get G = C. Thus G is actually bounded provided the mother wavelet is chosen in such a way that it satisfies the admissibility condition:
In passing, note that the above condition also implies that, for
which is the above mentioned zero–mean requirement for the mother wavelet. The conclusion is that the family generated by any admissible mother wavelet actually constitutes a frame in Therefore, from eq.(3.9), the reciprocal wavelets are Moreover, since the frame operator G is a constant, the frame is tight (see item iv. of §3.2) and the vectors of the reciprocal wavelet family, required for the synthesis of are proportional to the frame vectors, viz.,
where is the mother of the reciprocal wavelets, also generated by Note that the reciprocal wavelets are generated by their mother exactly as the frame vectors are generated from From eq.(3.12) we finally have the reconstruction formula
It might appear that there is something wrong in the above equation; indeed if we integrate both members over the is zero since, from eq.(4.8), the integral over is zero, whereas the integral of the i.e. the area under may well have a finite value. The explanation of this apparent incongruence is that eq.(4.9) was obtained by resorting to eq.(3.12), which makes use of the operator T*, defined by (3.3) in a weak sense. Therefore, eq.(4.9) also holds true in weak sense, so that it can only be used to compute inner products It may be shown (Daubechies, 1992, p.25) that the integral on the of (4.9) converges to in but not in In words, if we perform the double integration over a finite area when and the difference between the two
72
MARZIO MARSEGUERRA
members of eq.(4.9) tends to a very flat, stretched, function which has same area as that of but vanishing norm in indeed this norm is an inner product and, coherently with the mentioned weak sense convergence, (4.9) holds true not per se but when used to compute inner products. In the case at hand the resolution of identity (3.10) is written
In general we consider positive scales only and in this case from the expression (4.6), we get
where the upper sign refers to and viceversa. The condition required for the admissibility condition of reads
The metric operator G is now piecewise constant, being
As before, the reciprocal wavelets are obtained by resorting to eq.(3.9)
where This time we have to distinguish between negative and positive frequencies, as required by eq.(4.13); to this aim we first Fourier transform the above equation (4.15) and then we take its inverse transform, separating the two frequency ranges, viz.,
where and
In case of a real mother wavelet we have and from (4.11) we get (4.14) become and
In this case from eq.(4.3) we have
so that Then eqs.(4.15) and
73
NOTES ON A SIMPLIFIED TOUR Finally, eqs.(4.10) and (4.3) yield
so that
in which the norm of
is taken with respect to the measure This expressions means that the vectors form a tight frame with frame bound C/2.
4.3 A feature of the mother wavelet in transient analysis As pointed out in §4.1, the CWT of a signal lends itself to localize and analyze transient phenomena such as singularities, peaks, etc. Obviously, the efficiency of this methodology strongly depends on the choice of the mother wavelet which, to a large extent, is up to the analyst. In this respect we have seen that, besides a somewhat vague requirement of good time and scale localization properties, the main requirement imposed to is represented by the admissibility condition (4.7) which implies the vanishing of its zero–th order moment. We now show that the vanishing of as much higher moments as reasonably achievable is a further feature highly desirable in signal transient analysis. To this aim let us consider (Daubechies , 1992, p.49; Cohen, 1996) a function continuous, bounded and square integrable together with its derivatives up to the order, with In order to investigate the regularity of at some point the approximating polynomial of degree is introduced, viz.,
Further, assume that inequality holds true where wavelet
Moreover
is
regular at
i.e. assume that the following
and is a strictly positive constant. Now, select a mother having vanishing moments up to at least the order, viz.,
is required to decay at infinity fast enough so that
Then it turns out that Proof: The condition (4.16) clearly implies that write
so that we may
74
MARZIO MARSEGUERRA
Finally, eq.(4.18) follows from the condition (4.17) provided it is further assumed that
The expression (4.18) tells us that, as the scale (which implies that also by the condition (4.19)) then: decays very fast to zero if is an ”honest” or a ”regular” function at i.e. if at it is with a large slowly decays to zero if is ”irregular” at i.e. if its index is small. Obviously these statements are valid provided is such that its moments are zero up to the order, with In that case, the conclusion is that wavelet transforming an and looking at small scales, we may observe peaks in the in correspondence to values of where is irregular. A possible application of methodologies analogous to the described one may be found in image analysis and compression. Indeed most of the information in an image is contained in the discontinuities of the graph. A deep and comprehensive investigation of this problem may be found in Mallat’s works (Mallat, 1992). 5. THE DISCRETE WINDOWED FOURIER TRANSFORM 5.1 Time–limited window We now deal with a time localized (or time limited) window, that is a window with compact support having a length as described in §2.2. Therefore also has the same support (translated by ), whatever the support of may be, and it can be expanded in a discrete Fourier series (eq.(2.3))
where
is the frequency step 10,
and
where the last equality follows from eq.(2.15). Having discretized the frequency in steps of size we proceed by discretizing the time in steps of length By so doing the set of continuous indexes is replaced by a discrete set constituted by the grid of points where Eq.(5.l) reads
where
10
Actually we are free to chose any frequency step smaller than 1/T since suitably padded with zeros, may be thought of as having a support larger than T.
75
NOTES ON A SIMPLIFIED TOUR
To obtain the reconstruction formula for we follow a procedure completely analogous to that of the continuum case (eq. (4.4)), viz.,
where The family constitutes a frame provided G is bounded; in this case G would then be the metric operator of the discrete window Fourier approach. To see that G is actually bounded we apply G to any viz.,
Substitution of eq.(5.2) in which
and
are replaced by
and
yields
so that G is
which is a function which approximates Unlike the continuum case, the operator G is not a constant; however we may say that, since has a compact support, the of (5.3) contains only a finite number of nonvanishing terms, so that Moreover, for so that, if that is, if then in and within the intervals Then is not bounded and the do not constitute a frame. In the opposite case, namely for is always positive 11. Then is confined between a greatest lower bound and a lowest upper bound so that, almost everywhere and
In conclusion, provided provided the time step is smaller than the window support T, the do constitute a frame; the operators G and are both bounded so that G actually is the metric operator. We may now utilize eq.(3.9) to get the reciprocal vectors required for the synthesis of viz.,
Remembering that
is
that is
we get
where
11
apart from an inessential zero measure set in case of
and
76
MARZIO MARSEGUERRA
is the mother of the reciprocal vectors The above expressions indicate that also the vectors can be obtained by means of translations and modulations of a single function, namely the which differs from the window as much as the function differs from the constant The reconstruction formula for i.e. the synthesis of is finally obtained from eq.(3.12) which in the present case reads
which is the discrete counterpart of eq.(2.18).
5.2 Band limited window The present analysis closely follows that of the preceding section, the difference being essentially that the roles of time and frequency are interchanged. A window is said to be band limited if its FT is zero outside a specified frequency band, viz., for The starting point is represented by the eq.(2.10), here written as
Since is band limited, also by ), whatever the band of Fourier series
has the same band width (translated may be, and then it can be expanded in a discrete
where is the discrete time step the coefficients are given by the
12
. From the second of eqs.(2.4) it is seen that of eq.(5.4) written for Then
Having discretized the time in steps of length we proceed by discretizing also the frequency in steps of size As for the case of a time localized window, the set of continuous indexes is then replaced by the discrete set constituted by the grid of points where and From eqs.(5.4) and (2.8) we get
To obtain the reconstruction formula for case (see eq.(4.4)), viz.,
we again proceed as in the continuum
12 Actually we are free to choose any positive time step smaller than since suitably padded with zeros, can be thought of as having a band width larger than
NOTES ON A SIMPLIFIED TOUR
77
From eqs.(2.8) and (5.5) we get
Substituting in (5.6) yields
where
is a non negative function which plays a role analogous to that of of the time limited window case, the difference being that now the inner product is taken in the frequency domain so that we have to come back to the time domain. Moreover, from eq.(5.8) it appears that a possible metric operator would act as a filter on Proceeding similarly, it can be shown that, provided is confined within the interval so that also then
and finally, since
by Parseval’s theorem
Thus the family does actually constitute a frame. Having ascertained that is bounded, the reconstruction formula for immediately follows from eq.(5.7) viz.,
where
Inverse Fourier transforming (5.10),
Thus the sequence whose members are the inverse FT of the the required reciprocal family of
is
78
MARZIO MARSEGUERRA
6. THE DISCRETE WAVELET TRANSFORM 6.1 Introduction Given a signal energy, viz.
let us consider its dilated version
having same total
where is a scale factor. A feature of the CWT is that the transform of computed at the scale–time coincides with that of computed in correspondence with the scale–time
Indeed, we have
so that
In the discrete wavelet approach, the continuum of scales and times is substituted with a regular grid. When sampled with a time step the initial continuous signal may be thought as taken at the initial scale so that where The condition (6.1) implies that the CWT of this signal dilated by i.e. at the scale and taken with a larger time step at times coincides with If now the dilated signal takes the place of the initial one, an additional dilatation leads to a scale and to a time step so that Proceeding in this way, at the step the scale is the time step is and the discrete time sequence is In conclusion, in the discrete approach, the condition (6.1) is satisfied provided that geometrical sequences of scales and times are selected.
6.2 Band–limited mother wavelet We now consider the case of a band–limited mother wavelet, i.e. a mother wavelet for In a discrete approach, the maximum time step at the 13. Application of Parseval’s theorem to eq.(4.3) and scale is then substitution of expression (4.2) for gives
13 This condition follows from the well known requirement that the Nyquist frequency be larger than or equal to
79
NOTES ON A SIMPLIFIED TOUR Since
is band–limited, also is band– limited, viz. and we may expand in a Fourier series the quantity
where is the scale–dependent time step at scale given by the inverse Fourier transform
for
The coefficients
are
Having discretized the time, we now discretize the scale according to the values of the geometrical sequence, viz. Eq.(6.2) is then written
Correspondingly, instead of the continuous wavelets discretized versions. To simplify the notations we write
we shall consider their
As in the preceding cases, we must now establish whether the wavelets so discretized constitute a frame (actually, a subframe of the continuous wavelet frame). In other words, we should see whether also in the present case of the discrete windowed transform we can arrive to a frame condition similar to that of eq.(5.9). To this aim we establish the link between the norm of and that of From the general expression (4.3) and from Parseval’s theorem we get
Then
From eqs.(6.4) and (6.3) we get
so that
where
80
MARZIO MARSEGUERRA
which is a real function everywhere positive, apart from a possible inessential set of measure zero. Eq.(6.6) is analogous to eq.(5.8) of the discrete windowed Fourier approach; again, it turns out that a possible metric operator would act as a filter on The next step consists in investigating whether is constrained within fixed limits; in this case the of eq.(6.6) would give rise to a constraint for and then, from Parseval’s theorem, also for To this aim we note that i. is scale–periodic, viz.,
so possible bounds for
may be determined with reference to one period
ii. The mean value of
over a period
is
where are the same constants of the continuous wavelet transform in case of positive scales (see eq.(4.11)); iii. It may be easily shown that where is defined by eq.(4.11). From the above remarks it follows that in each period and are essentially positive and oscillate around their mean values and respectively, which obey the admissibility condition (4.12). Therefore in each period – and then everywhere – the function is constrained between a greatest lower bound which is positive everywhere except at where and a lowest upper bound viz.,
If we define required constraint condition for
and
we end up with the viz.,
which plays the role of the admissibility condition (4.12). Therefore
Since
by Parseval’s theorem, eq.(6.6) then becomes
which is the required condition for the to be a frame. Having ascertained that the discrete family actually constitutes a frame, we may determine the
81
NOTES ON A SIMPLIFIED TOUR
reciprocal family eq.(6.5) as follows
required for reconstructing
The factor in brackets on the exists. Then
is
To this aim we write
and we know from eq.(6.7) that its inverse
where we have introduced the Fourier transform of the reciprocal wavelets, viz.,
Inverse Fourier transforming eq.(6.8) yields
where the i.e. the IFT of are the required reciprocal wavelets. The above analysis shows that, unlike the case of the continuous transform, the discrete reciprocal wavelets are not proportional to the wavelets In the present case, starting from an admissible mother wavelet we must proceed along the following steps. Firstly, we compute the discrete wavelets (eq.(6.4)) and their Fourier transforms successively we filter them with the filter, thus obtaining (eq.(6.9)); finally we get the required by inverse transforming Concerning the filtering action, we note that in the limit the function tends to which has the constant values in this case the above filtering action is missing and the proportionality between wavelets and reciprocal wavelets is restored. 7. THE MULTIRESOLUTION ANALYSIS 7.1 Introduction The multiresolution analysis (MRA) represents an important improvement in the field of the wavelet transform, essentially because it allows obtaining recursive expressions well suited for the computations 7.2 The nested spaces Given a function introduce the following quantities:
a scale factor
and a time step
we
82
MARZIO MARSEGUERRA
and
From the definitions it follows that aand are unitary operators, viz.,
Thus and analogously for b - application of the adjointness condition (1.4) to eq.(7.1) yields
c - the two operators do not commute; they enjoy the following properties
The FT of
is
Within the present context of the MRA, is generally a real, bell–shaped function centered near like the window of the WFT case. If is a suitably defined width of then is centered near and has a width of It follows that is a sample of weighted over an interval of length near Clearly, the greater the interval over which is averaged, the less the details of the profile of contribute to the computation of the sample value. In particular, the above interpretation of the inner product must be valid also for whatever the translation of may be: therefore we require that should obey the following first condition
which implies continuity of the Fourier transform for all note that this condition is convenient but not essential for the MRA. 14
Proof: in correspondence of an arbitrary
Since
and
14
. However
consider the quantity
then we have
83
NOTES ON A SIMPLIFIED TOUR
A second condition imposed on the scaling function is the orthonormality between translated versions, viz.,
which implies the same kind of orthonormality between translations at any scale:
For any define the vector space as the space whose orthonormal basis is the family In particular, is the space whose orthonormal basis is the family of translated scaling functions; thus by definition. Then any vector may be written as
where we have introduced the translation operator
where
In particular, from eq.(7.8) it follows that any
and we may identify with the set with The link between and
may be written as
of all square summable sequences is (see eq.(7.3)):
Taken together, the two above equations read
Since
its norm is finite, so that
This condition guarantees that the operator is bounded even if the sum in eq.(7.9) contains an infinite number of terms. In practice we approximate the vectors
84
MARZIO MARSEGUERRA
in by considering a finite number of terms in the sum appearing in (7.8): correspondingly becomes a polynomial in T and (a Laurent polynomial) and therefore it is bounded in In the following we shall assume that any operator like is a Laurent polynomial operator. These operators will be also called functions of T. Eq.(7.8) states that the vector is obtained by applying the operator to the vector so that is the image (the range) of under the operator In addition to the mapping performed by we also introduce the orthogonal projection the relevant operator is
Indeed, given any we get a vector in Thus is a projection operator. If is already in from the orthonormality condition (7.7) it follows that the application of leaves it unchanged. Finally, since is self–adjoint and idempotent 15, viz. and then which means that the projection is orthogonal. Since and the operator may be written as
We are now in a position to fix the third condition of the MRA. We have seen that within i.e. at scale the time shift between successive basis vectors and is then successive samples and may be intuitively viewed as representing sampled with a time step Going to the next scale the corresponding samples are taken with a time step times larger, so that the family constituted by vectors in contains more information on than the family of the vectors in From this intuitive consideration, the third condition of the MRA follows, viz.,
From this condition and from eq.(7.13) it follows that must satisfy the fundamental dilatation equation
15
Proof: we have
so that
NOTES ON A SIMPLIFIED TOUR where the operator
85
dependent on the choice of the scaling function
is
The dilatation equation tells us that the dilated scaling function is a weighted average of translated scaling functions the coefficients being the weights. The polynomial operator acting on vectors in is called averaging operator and the weights are called filter coefficients. From eq.(7.16) we get
We shall see that this equation represents the basis for obtaining eq.(7.59) which gives an explicit expression for Two additional conditions are imposed on the MRA. The requirement (7.15) may be written as so that the family constitutes a hierarchical structure of nested spaces, each containing those relating to scales with higher index Then one is lead to intuitively think that the space relating to the smallest possible index should coincide with and that relating to the highest possible index should consist only of a constant, whose value can only be zero, due to the requirement of belonging to These are exactly the fourth condition and the fifth condition imposed to MRA, viz.,
which, with some abuse of notations, may also be written as
Let us now consider the orthogonal complements of the spaces Eq.(7.15) tells us that the space contains therefore can be split in the sum of plus the orthogonal complement viz.,
Correspondingly, in addition to the orthogonal projection operator we introduce the orthogonal projection operator any we get
The operator viz., Since
is related to
we have
in the same way as
is related to
such that, for
(see eq.(7.14)),
MARZIO MARSEGUERRA
86
where, for example means that for any From eq.(7.20), after successive substitutions, we get Then the orthogonal projection of any over
then may be written
where the last equality follows from the idempotent character of When we get Since is contained in then which is contained in is contained in as well. Therefore is orthogonal not only to but also to and the family is constituted by disjoint, mutually orthogonal subspaces; the additional condition (7.18) also implies
We complete this section by considering the action of the operator on a function In other words, we would like to know on which space does the function live. The orthogonal projection of over is
since
when
The orthogonal projection of
over
since when Thus maps onto This result, together with eq.(7.13), indicates that the operator the following mappings
is
performs both
7.2 Useful operators and their relationships Define the operators
and
16
H and G will be identified as the low-pass and high-pass filters, respectively. From the above definition we get
16
More generally, H and G may be defined in consider their restrictions as indicated.
Here and in the following we
87
NOTES ON A SIMPLIFIED TOUR Analogously
17
These operators enjoy the following properties:
The products and sums of the two operators are
and
From the above definitions and from eqs.(7.21) it follows that
The above relations are pictorially described in Figure 1 in which the and spaces are drawn as segments and the vectors in a given space are represented by points in the corresponding segment. A space is contained in another one if the downward vertical projection of the segment representative of the former falls within the segment representative of the latter, e.g. The null space of an operator is represented as {0}. However note that the above scheme of vertical projections must not be applied to points representative of vectors; indeed the vertical from a point, e.g. in falls either within the segment representative of or within that representative of and one might erroneously infer that the vector corresponding to that point belongs either to or to whilst it is clear that can be split in a component in and another in 17
Note that isometric operators: e.g. for the case
and i.e. for
are so that
88
MARZIO MARSEGUERRA
We further introduce the up–sampling and down–sampling linear operators. The up–sampling operator is defined as follows
and derives its name from the fact that its application to any vector
yields
Note that is obtained from by multiplying the time shifts of all the components by Then, represents an enlarged version of in the sense that, like it is made up by the same linear combination of basis vectors, but these are now separated by a larger distance instead of In particular
Let us now apply we get
to any
From eqs.(7.3) and (7.16)
so that Note that The adjoint
so that actually of
maps
onto the restriction
is immediately obtained from (7.36), viz.,
of
NOTES ON A SIMPLIFIED TOUR
89
where we have introduced the down–sampling operator defined as the adjoint of the up–sampling operator, namely and the adjoint of (see eq.(7.2))
Up to now the scaling factor was allowed to take any real number greater than one; to further proceed with the MRA we need some relationships which can only be obtained if we restrict our considerations to a scaling factor
Henceforth we shall assume that takes the above value and, correspondingly, we will have a so called dyadic sequence of scales and the operators and will be substituted by and respectively. First of all, we obtain the key relationship between and Given any two vectors in correspondence of any we have
Since
we get
and therefore The above expressions, together with eqs.(7.33) and following relations (recall eq.(7.35)) i.e. )
allow one to obtain the
Note that is obtained from by first deleting the odd components and then by halving the time shifts of the remaining even components, i.e. In this process half of the information is lost and the support of is half of that of 7.4 The MRA approach
In the preceding sections we have seen that, given a suitable scaling function and a scale factor we may construct a ladder of nested spaces such that any may be split in the sequence of its orthogonal projections onto the spaces (eq.(7.23)). We shall now see that this sequence actually represents the WT of More precisely,
90
MARZIO MARSEGUERRA
assume that we are given a signal which we view as the orthogonal projection of an unknown signal to We successively consider the orthogonal projections of to and respectively, and then the orthogonal projections of to and respectively, etc. 18. In general we get
where
By so doing, after M steps we arrive at the expression (7.22) here reported for convenience
The vectors nal spaces
belong to the sequence of disjoint, mutually orthogoand represent the details of at the various scales the vector represents the residue of at the M–th scale. In the limit and the sequence is the complete WT of The main feature of the MRA approach is that, for any it allows one to obtain the pairs by means of a recursive procedure, numerically easy to implement, based on the introduction of a new sequence of vectors the wavelets, such that represents an orthonormal structured basis in All these wavelets may be obtained from a single function (dependent on the scaling function ), the mother wavelet, exactly as the sequence is obtained from Moreover, a similar recursive procedure allows one to go backwards, namely to obtain given the residue and the sequence 7.5 The wavelets We have seen that the space is made up by the sum of plus the orthogonal complement of namely (eq.(7.19)). Any vector may then be split in the sum of its orthogonal projections on and viz.,
Obviously, if its projection on vanishes; analogously, if its projection on vanishes. We are now interested in finding explicit expressions for these two projections in terms of the operators H and H*. Projection From eq.(7.30) or from eq.(7.36) it appears that is the image of H* acting on any vector in therefore any vector in – and therefore also – may be viewed as resulting from the application of H* to some Thus The problem of getting 18
will be considered below.
The orthogonal projections of any are zero since is orthogonal to both
to and
and
91
NOTES ON A SIMPLIFIED TOUR Projection Therefore any vector in
From eq.(7.32) it appears that is the null space of H. – and therefore also – obeys the condition
Substitution of eq.(7.37) for H yields
Since and are both Laurent polynomials, their product is also a Laurent polynomial and, from the first of eqs.(7.39) with and from (7.11) we get
This equation is satisfied if is odd, i.e. if it is a polynomial containing odd powers of T only. A possible solution consists in factorizing in the product of a suitably assigned function times an even function to be determined, viz.,
An appropriate
function is
whose adjoint is
so that Substituting the above expressions (7.43) and (7.42) in eq.(7.41) yields
We now deal with the problem of determining the translation operators Consider the operator The contribution of the second term on is zero since the null space of H. From eq.(7.36) we get Substitution of the second of (7.25) yields where the last equality follows from the fact that for is then
Consider the operator contribution of the first term on is zero since
and
applied to eq.(7.47). belongs to
The required expression
applied to eq.(7.47). The belongs to which,
92
MARZIO MARSEGUERRA
in addition to being the null space of G, is also the null space of
19
. Then
Eqs.(7.44) and (7.45) yield
Since the sum on eqs.(7.36), (7.37)
is an odd function of T, we get from eq.(7.38) and from
Substituting in (7.48) and also from the second of (7.25), yields
where the last equality follows from the fact that belongs to so that its orthogonal projection onto leaves it unchanged. In conclusion, the required expression for is We are now in a position to introduce the mother wavelet and all the wavelets thereby generated. We have seen that and are the orthogonal projections of a generic vector onto and respectively. Both these projections may also be obtained with the aid of the dilatation operator D. The first projection may be obtained by applying D onto the vector
where the last equality has been obtained making use of the dilatation equation (7.17). The second projection may be analogously obtained by applying D onto the vector
19 Proof: Any vector to a corresponding vector we get
may be obtained by applying the dilatation operator D (see eq.(7.8)). Then, from eqs.(7.3) and (7.16)
Application of to which is zero since
yields (see eq.(7.45)) is an odd function of T (see eq.(7.38)).
NOTES ON A SIMPLIFIED TOUR
where the vector
93
is so defined 20
In §7.8 we shall see that obeys the zero–mean condition (4.8): assuming that it is also localized in time, it may be called a wavelet. Figure 2, drawn with same symbols as the preceding one, depicts this situation. Thus, we have been able to obtain the orthogonal projections of a generic vector onto the subspaces and its orthogonal complement in by applying the dilatation operator D to the vector or to the vector respectively. Both these vectors are generated by the translation operator or applied the former directly to the scaling function which characterizes the current MRA analysis and the latter to a function of namely The wavelet can generate the wavelets just as generates the Indeed eq.(7.24) tells us that the dilated and translated versions of namely span the space Shortly we will see that the form an orthonormal basis in as a consequence, since the sum of the yields (see eq.(7.23)), the family actually represents an orthonormal basis in This family is generated by so that the basis is structured and the wavelet rightly deserves the name of mother wavelet. To demonstrate the orthonormality of the we start from The may be written as From eq.(7.33) we get
20
From (7.51) it appears that may be interpreted as the component of the basis vector of the space along the vector of the subspace i.e.
94
MARZIO MARSEGUERRA
From eqs.(7.49) and (7.25), and taking into account the orthonormality of get
we
The proof of the orthonormality of the is completely analogous to that of the (see eq.(7.7)). In terms of the coefficients the may be written as
The orthonormality condition implies
Substitution of eq.(7.46) yields the corresponding condition on the coefficients in viz., (see eq.(7.60)). Moreover, since the vectors are orthogonal to the vectors From the above consideration it follows that the orthogonal projection operator may be written as 21
7.6 The recursive relations for the coefficients of the WT
Let us consider a signal viewed as the orthogonal projection of an unknown signal to The recursive relations for the coefficients of the WT of are easily obtained in terms of the expressions resulting from the application of the operators H,G and their adjoints H*,G*. This is done by taking into account that the application of the operators and to vectors in yields same results as in (eqs.(7.35) and (7.38)), viz.,
operator (7.32),
21 Proof: if Alternatively, if
(eq.(7.37)) restricted to For we get
then is already in
(indeed, from
is a vector in then
and
95
NOTES ON A SIMPLIFIED TOUR
From eq.(7.38) it follows that the terms for which is odd do not contribute to the sum; when is even, e.g. we get
operator
operator
(eq.(7.36)) restricted to
restricted to From Figure 2 it is easily seen that for
Substituting eq.(7.50) for yields
and proceeding as in the above case of
operator (eq.(7.26)) restricted to easily seen that for
Proceeding as in the above case for
where
(indeed, from (7.31),
From Figure 2 it is
we get
From eq.(7.29) we get the identity and Eqs.(7.52) and (7.54)
yield
From the definitions
and and, analogously,
and (7.40) it turns out that Then
Proceeding in this way, we successively obtain the sequences of vectors in viz.,
in
and
96
MARZIO MARSEGUERRA
Since (again from eqs.(7.27) and (7.28)) and, analogously,
from the sequence
we get
Let us now consider the inverse operation of getting and From eq.(7.20) we get
In terms of the polynomials
and
this expression reads (see eqs.(7.56))
and then The first term on is a vector in and the second term is a vector in to the above equation once and once yields
Summing these two expressions (recall that
and
applying
)
where the last equality follows from the fact that In terms of the coefficients of the polynomials this expression reads (see eqs.(7.53) and (7.55))
so that we finally get
7.7 Computational procedures
The stage decomposition–reconstruction of a signal tized as follows:
may be schema-
Decomposition given
i. Compute the convolutions 22 and 22
The convolution of the two sequences then
and
and
where
is defined as
NOTES ON A SIMPLIFIED TOUR ii. Apply to the above convolutions the downsampling dyadic operator only the even terms of each convolution, thus obtaining and
97 i.e. retain
At this point, the components and may be computed from eqs.(7.56) and (7.57). Starting from computed in step ii) we may go further in the decomposition. Reconstruction given
and
i. Apply to the given sequences and the upsampling dyadic operator i.e. define two new sequences each obtained by inserting a zero after every element of the corresponding original sequence. By inserting the zeros in the odd positions of the resulting sequences, we get and and ii. Compute the convolutions and then sum them to get The above computational scheme is sketched in Figure 3.
7.8 Choice of the mother wavelet In the preceding sections we have seen that the mother wavelet is defined in terms of the scaling function (eq.(7.51)). The first and simplest scaling function suitable for generating an orthonormal wavelet basis goes back to Haar (1910), viz., where
Note that obeys the orthonormalization condition (7.6). A disadvantage of this scaling function is that it is poorly localized in frequency: indeed which slowly decays as From the definition we get
98
MARZIO MARSEGUERRA
In particular
The above coincides with the dilatation equation (7.16) provided
Eq.(7.44), then, yields wavelet is
is defined as
and, finally, the Haar mother
Coming back to the general problem of finding the scaling function, recall that depends, up to a normalization factor, on the translation operator through the dilatation equation (7.17). The FT of this equation reads
where
is the trigonometric polynomial
Writing (7.58) for and substituting in (7.58), yields Doing this over again yields
In the limit of the
and we finally obtain
in terms only
function, viz.,
The convergence of the above infinite product is detailed in Kaiser (1994, pp.183–190). Since and, as we shall see immediately below, the factors in the above product tend to unity and the product can be suitably truncated. Thus may be computed, at least numerically. Inverse FT, finally, yields the required From the above discussion it appears that the determination of the scaling function and then of the mother wavelet from eqs.(7.51) and (7.46), rests on the
99
NOTES ON A SIMPLIFIED TOUR determination of constraints 23 :
or
The coefficients
of this operator obey the following
Moreover
so that
and then, from the second of eqs.(7.60)
Let us move to the frequency domain. Since the FT of and we get
is
where
so that eq.(7.61) becomes
From (7.60) we get above equation yields Thus
substitution in the and, then,
The above conditions, together with eqs.(7.51) and (7.46), allow us obtaining the zero–mean condition for the mother wavelet viz.,
The eqs.(7.63) represent the basis for the construction of a sequence of Finite Impulse Response (FIR) filters constituted by polynomials of degree M (M = 0, 1, . . .) with real coefficients. Further assuming that the first and the last coefficient of each 23 The first constraint is obtained by substituting as obtained from the dilatation equation (7.17) in the normalization condition (7.5). The second constraint follows from the generalization of the dilatation equation (7.16). From eq.(7.3) we get Then
100
MARZIO MARSEGUERRA
polynomial, namely and have non zero values it follows that M must be odd. Indeed in case of an even M the condition (7.60) written for would become in contrast with the above assumption. Writing M = 2N – 1 we then have
To determine the 2N coefficients in we resort to eqs.(7.60) which give us N + 1 conditions: one from the first equation and the remaining N from the second one written for For N = 1, we have no degrees of freedom and the above mentioned conditions yield then
which is the polynomial operator of the Haar wavelets. For N > 1, we have N – 1 degrees of freedom and, correspondingly, we need N – 1 additional conditions. These may be chosen in such a way that the low–pass characteristics of are improved. These characteristics follow from the following two features of the FT of taken in correspondence of the multiples of the fundamental frequency i. The FT of the dilatation equation, i.e. eq.(7.58), yields
For odd, even,
then
so that
Finally, for
then
Summarizing these results
ii. In correspondence of any function
where
For
we get
is the
periodic version of
we get, from Parseval’s theorem,
viz.,
101
NOTES ON A SIMPLIFIED TOUR The
function
may be expressed as a Fourier series where
In case of
then
and the coefficients
so that
and, finally,
The eqs.(7.64) and (7.65) tell us that attains its maximum at and then it rapidly decreases, being zero in correspondence of all Thus it is a low pass filter. This feature may be further enhanced by using the N – 1 degrees of freedom in such a way that smoothly attains the zero values at the frequencies i.e. by imposing the vanishing of the derivatives of at the To do this, a possible recipe consists in assuming that is given by the product of a polynomial of degree N – 1 (normalized so that ) times the product of N Haar–filters, viz.,
Thus as required by the first constraint (7.60), and also a zero of order N. The problem is now that of selecting a such that also obeys the orthonormality condition represented by the second of eqs.(7.60) or by eq.(7.62). To this aim, define
where
and
From the identity
we get
Since
and The above identity then reads
and then where
it follows that
and
102
MARZIO MARSEGUERRA
is a polynomial of degree 2(2N – 1) in we may write
Since and then
is a real quantity,
where
is a polynomial of degree 2(N – 1) in The above analysis shows that and share the same analytical form and obey the same analytical constraints. Then and the determination of amounts to find the square root of i.e. to find a polynomial of degree N – 1 such that
In the engineering jargon, this square root extraction is also called spectral factorization. We shall restrict ourselves to the analytical determination of for N = 2 and N = 3. A detailed discussion of these cases may be found in Kaiser (1994, pp. 180–183). N = 2: The second–order polynomial
reads
The–first order polynomial to be determined reads coefficients are determined by the conditions (7.66) and out that there are two possible solutions, viz., and, correspondingly, there are two polynomials
The unknown It turns
Apart from the zeros at has a zero outside the unit circle and has a zero within the unit circle: following the usual engineering jargon, they will then be called minimum– and maximum–phase filters, respectively. N = 3: The fourth–order polynomial
reads
The second–order polynomial to be determined reads unknown coefficients are determined by the condition (7.66) and It turns out that there are two possible solutions, for namely
where and
The
and As in the preceding case, are the minimum– and the maximum–phase filters, respectively.
103
NOTES ON A SIMPLIFIED TOUR
The filter coefficients for cases from N = 4 to N = 10 are given in Daubechies (1992, p.196).
8. SUB–BAND FILTERING The sub–band filtering of a signal is a decomposition–processing–reconstruction technique widely adopted by electrical engineers. In its simple, two–channel version, suitable filters are applied to the signal, which is decomposed in a low frequency and a high frequency component, each relating to half of the entire frequency range. Since these components have different Nyquist frequencies, correctly sampled versions are then obtained by discarding every other sampled value (sub–sampling). The decomposed signals are then suitably processed according to the specific problem at hand, and finally the reconstruction stage is carried out by means of a procedure which is the inverse of that adopted in the decomposition stage. Let us consider a band limited function i.e. a function such that for As mentioned in §2.2, may be represented by a Fourier series in terms of the discrete sequence of values sampled at times where is the time step resulting from the Nyquist criterion. From eq.(2.4) we get where Consider the signals resulting from low-pass (LP) and high-pass (HP) filtering 8.1 Ideal case Low–pass filtering. Let having a bandwidth half of that of
be an ideal LP square filter centered at viz.,
Inverse transforming, we get
From eq.(2.4) it follows that can also be expressed by its Fourier series in terms of sampled with a time step less or equal to Therefore we can use the same time step selected for so that
where
Application of the LP filter get, from eqs.(8.1) and (8.3),
or, more specifically
to
yields
In the frequency domain we
104
MARZIO MARSEGUERRA
so that, from the first of eqs.(2.4), we get
The expressions so far obtained have been derived by sampling and with the time step However by definition, has the same bandwidth of therefore the Nyquist criterion is satisfied also if is sampled with a time step Then, from eq.(2.4) we get
where
Knowledge of the coefficients i.e. essentially of sampled with a time step of allows the determination of the function (see eq.(2.5)), viz
From a computational point of view, let us assume that we have a fast code for computing convolutions. The coefficients appearing in the expression (8.6) for may then be computed as follows: i. compute the convolution between the coefficients and viz.,
ii. retain only the even terms of the sequence tion)
(downsampling of the convolu-
Very simple and important expressions may now be obtained by resorting to the 24 . We define
Retaining only the even terms in
24
For transform.
(downsampling), yields
i.e. for
on the unit circle,
is the Fourier
105
NOTES ON A SIMPLIFIED TOUR The function
may be expressed in terms of
and
as follows
Finally
High–pass filtering. Let which is the complement of that of
be an ideal HP square filter having a bandwidth in the bandwidth of viz.
Inverse transforming, we get
Following a procedure quite analogous to that given in the LP case, we end up with the following expressions
where
or, more specifically,
Moreover,
so that
Sampling with a time step
where
yields
106
MARZIO MARSEGUERRA
Knowledge of the coefficients viz.
allows the determination of
The recipe for computing the coefficients runs as before: i. compute the convolution between the coefficients and
ii. retain only the even terms of the sequence tion) Going to the
viz.,
( downsampling of the convolu-
we define
Retaining only the even terms in
Finally, the function
(see eq.(2.5)),
(downsampling), yields
may be expressed as the
in eq.( 8.10), viz.
Reconstruction of f(u). From the definitions (8.2) and (8.11) of the ideal square filters, it follows that so that, from eqs.(8.5) and (8.13) we get Inverse transforming (see eqs.(8.7) and (8.15)), we get
Evaluating for
NOTES ON A SIMPLIFIED TOUR For
even, i.e.
107
we get
so that
Since
For
the above expression may be formally written as
odd, i.e.
we get
so that
Substitution of eqs.(8.4) and (8.12) yields
Taken together, eqs.(8.14) and (8.15) yield
Thus, knowledge of the coefficients and appearing in the expressions (8.7) and (8.15) of the filtered signals, allows the determination of the coefficients required for the reconstruction of the original signal From a computational point of view, the reconstruction formula (8.20) may be viewed as obtained through the following steps: i. Starting from the adimensional sequences introduce two new adimensional sequences each obtained by inserting a zero after every element of the corresponding original sequence. This operation is called ”upsampling” of the original sequences. By inserting the zeros in the odd positions of the new sequences, their elements are
108
MARZIO MARSEGUERRA
ii. Compute the convolutions of the new,”upsampled”, sequences with the constants of the two filters
iii. Add the results obtained in item ii., viz.,
where and Let us now consider the reconstruction formula (8.20) or (8.23) in terms of the We define
and the
of the convolution (8.23) reads
8.2 Real case The choice of the ideal square filters and for sub–band filtering a given signal has the drawback that the filter constants, namely and slowly decay with Then a large number of them is required for performing the calculations pertaining to the filtering procedures. A possible remedy could consist in performing the filtering action with a pair of new filters obtained by suitably smoothing respectively. Correspondingly, with respect to the original filters, the new ones will have larger bandwidths therefore they are more concentrated in time, which means that the constants decay faster with and the burden of the convolution computations is lower. However, the larger bandwidths of the new filters also imply that the time step adopted in the ideal case for sampling the filtered signals should be correspondingly reduced, the maximum allowable value compatible with the Nyquist criterion being The use of the time step then gives rise to the aliasing phenomenon. Nevertheless we substitute the ideal filters with their smoothed version, viz.,
and and introduce the following new notation
NOTES ON A SIMPLIFIED TOUR
109
Correspondingly, the decomposition expressions (8.10) and (8.17) become
and the reconstruction formula (8.24) becomes
Substitution of eqs. (8.25) finally yields
On we have written instead of because of the aliasing effects which prevent the exact reconstruction of the true signal. The sub–band filtering procedure given in this section is schematically represented in Figure 4. Let us come back to the aliasing effects present in the reconstruction formula (8.26). More specifically, the aliasing effects is present in the second term on indeed, for
and i.e. is delayed by In case of ideal filters, the filtered signals have supports so that the addition of their versions shifted by does not change their shape. Viceversa, in case of real filters, the supports are larger than and the above mentioned additions corrupt the filtered signals. Nevertheless the true signal can be recovered provided the filter constants are selected in such a way that the second term on of eq.(8.26) vanishes, i.e. provided
110
MARZIO MARSEGUERRA
In pursuit of satisfying this condition, we report the two following schemes: a) The Esteban and Galand scheme (Esteban and Galand, 1977). The various involved function are expressed in terms of as follows
With this choice, the condition (8.27) is satisfied and eq.(8.26) becomes
The corresponding filters are called ”quadrature minor filters” (QMF) for the following reasons: The condition implies that so that for we get
Thus equals delayed by In addition, if is symmetric,
and then
which means that is the mirror of with respect to b) The Mintzer’s scheme (Mintzer, 1985). The various involved functions are expressed in terms of as follows
With this choice, the condition (8.27) is satisfied and eq.(8.26), in correspondence of and real yields
In both the above schemes, the relating filters are functions of the basic filter for computational reasons, this is usually of the FIR–type, i.e. it has only a finite number of nonzero terms. Within the Esteban and Galand scheme, no FIR filter has been found suitable for an exact reconstruction of (i.e. such that the factor in brackets in eq.(8.28) be equal to 2), even though and may be kept very close to each other. In the Mintzer’s scheme, instead, it is possible to find FIR filters such that the above reconstruction is exact. We end this section by comparing a decomposition/reconstruction stage of the sub–band filtering with that of the MRA in the wavelet transform. In the following we shall assume real valued sequences and work in the domain. The two procedures, namely sub–band filtering and MRA coincide provided that: i. The operator coincides with Since
111
NOTES ON A SIMPLIFIED TOUR the condition becomes ii. The operator
coincides with
or
Since (see eq.(7.46))
the condition becomes iii. The operators
and
coincide with
and
respectively. Since
the conditions become and
In terms of
the subband filtering functions are
which, apart from a change of sign in and coincide with the choice of the Mintzer’s scheme. The change of sign is inessential since the above definitions also satisfy the condition (8.27). 9. CONCLUSIONS A very simple indication of the variability of a stationary signal is represented by its variance, i.e. by a single number. After Fourier – 175 years ago! – we know that this single number may be resolved in a function of the frequency, namely the power spectrum, which tells us how the variance is distributed among the harmonics of the signal. By so doing, a lot of additional information is gained from the data: for example, a peak in the spectrum of a signal measured on a plant indicates the proneness of the plant to resonate at the peak frequency and it may suggest techniques for favouring or avoiding that resonance. A further, important, improvement in signal analysis is constituted by the Windowed Fourier Transform, by means of which the above analysis may be extended to non stationary signals. At each time, the Fourier transform is now restricted to a portion of the signal enveloped within a window function contained in a small time interval around the given time. By so doing, the signal is more deeply investigated since, instead of the above function of one variable, we now deal with a function of two variables, namely time and frequency, which allows us to examine the frequency content of successive pieces of the time signal. However the constancy of the width of
112
MARZIO MARSEGUERRA
the selected window makes the approach too rigid: indeed the window width may be too large when the signal exhibits fast transients and too small when it slowly varies. The Wavelet Transform overcomes this drawback by using windows of different widths: a mother wavelet, a little wave suitably localized in time and frequency, is selected and at the various scales the signal is viewed by wavelets which are dilated and shifted versions of the mother wavelet. Thus, the procedure extracts the local details, e.g. the fast transients, at small scales and the signal trend at large scales. An additional feature of the wavelet transform is the possibility of selecting a mother wavelet which fits the problem at hand: in the windowed Fourier approach we always make use of complex exponentials and the freedom is limited to the choice of the window which envelopes the exponentials. In spite of the fact that nowadays the wavelets have become a relatively popular mathematical technique, they are still scarcely utilized by nuclear engineers. A field of primary interest is certainly that of the early detection of system failures: indeed the wavelet transform seems the right methodology for detecting the warning spikes or fast transients of short duration randomly occurring in some plant signals before the occurrence of important failures. Another field which may be profitably tackled by the wavelet methodology is that of signal denoising, handled by suitably thresholding the wavelet coefficients. Among the standard applications of the wavelets, we should mention the attempts to improve the solutions to some mathematical models of phenomena of interest to the nuclear power plants: an example is the open question of the fully developed turbulent flow, generally performed by means of the Navier–Stokes equations with a dominant non linear advection term. Another standard application is the data compression, which is of importance in many different nuclear engineering fields ranging from the reactor operation and maintenance to the safeguards. We hope that the present review/introduction will stimulate our professional community towards the use of the wavelet methodology. Acknowledgments: I would like to thank Dr. S. Tarantola for useful discussions and suggestions.
REFERENCES Chui, C., 1992, An introduction to Wavelets, Academic Press, San Diego. Cohen, A., and J., 1996, Wavelets, the Mathematical Background, Proc. IEEE, 84, 4. Daubechies, I., 1992, Ten Lectures on Wavelets, Soc. for Industrial and Applied Mathematics, Philadelphia. Esteban, D., and Galand, C., 1977, Application of Quadrature Mirror Filters to Split–Band Voice Coding Schemes, Proc IEEE Int. Conf. Acoust. Signal Speech Process., Hartford, Connecticut, pp. 191–195. Gabor, D., 1996, Theory of Communication, J. IEE (London), 93, pp. 429–457. Haar, A., 1910, Zur Theorie der Orthogonalen Funktionen–Systeme, Math. Ann., 69, pp. 331–371. Kaiser, G., 1994, A Friendly Guide to Wavelets, Birkhäuser Mallat, S., and Hwang, W.L., 1992, Singularity Detection and Processing with Wavelets, IEEE Trans. on Information Theory, 38, 2. Mallat, S. and Zhong, Z., 1992, Characterization of Signals from Multiscale Edges, IEEE Trans. on Pattern Analysis and Machine Intelligence , 14, 7. Mintzer, F., 1985, Filters for Distortion–Free Two–Band Multirate Filter Banks, IEEE Trans. Acoust. Speech Signal Process., 33, pp. 626–630. Special Issue on wavelets, Trans. of the IEEE, April 1996, 84, No. 4.
GENETIC ALGORITHMS FOR INCORE FUEL MANAGEMENT AND OTHER RECENT DEVELOPMENTS IN OPTIMISATION
Jonathan N. Carter Centre for Petroleum Studies Imperial College(ERE) Prince Consort Road South Kensington London SW7 2BP United Kingdom
1
INTRODUCTION
The number of different optimisation schemes available to the nuclear industry has continued to grow. In the last review, Parks1 identified Simulated Annealing (SA) as a useful tool and Genetic Algorithms (GA) as tools with potential but needing further development. Since that review, two simpler derivatives of SA have been developed – the Great Deluge Algorithm (GDA) and Record to Record Travel (RRT) – and the GA have been successfully applied to fuel cycle management. This paper reviews these developments in optimisation and also describes some other new optimisation tools available: the Tabu Algorithm (TA) developed by Glover2, the Population-Based Incremental Learning Algorithm (PBIL) proposed by Baluja3 and the Multi-point Approximation Method (MpA) being developed by Frandsen4 for use in the petroleum industry. Together, this collection of techniques form a powerful toolkit for the nuclear engineer seeking to solve difficult optimisation problems.
2 OPTIMISATION PROBLEMS Optimisation is the process of finding the optimum (i.e. best) solution possible to a problem. This solution is often required to meet a number of additional constraints. In mathematical terms this can be formulated as:
Advances in Nuclear Science and Technology, Volume 25 Edited by Lewins and Becker, Plenum Press, New York, 1997
113
114
JONATHAN N. CARTER Subject to
are the decision variables, i.e. those things that can be changed. is the objective function which is usually a numerical, rather than an analytical, function of the decision variables. If one has to minimise a function this is equivalent to maximising So clearly maximisation and minimisation problems can be transformed one into the other. In numerical optimisation, an optimum, either local or global, is assumed to have been found when all points in a small region around the current point, which meet all the conditions, have function values that are worse than the function value at the current point. In practice we often cannot test all points, and so substitute ‘a sufficiently large number’ in place of ‘all’. As a consequence one can never be completely certain that an optimum has been identified. Neither can one be sure whether the optimum is the global optimum or just a local optimum. An example of such a problem might be to minimise the cost, of running a power station, subject to the requirement that the power output will be 1 GW and emissions will not exceed the safe limit: Minimise Subject to emissions safe limit - actual emissions > 0 power output = 1 GW The decision variables might be the number of staff at different grades, or the temperature of the core. In practice we are often satisfied with finding a ‘better’ solution, rather than the true (global) optimum solution. How much ‘better’ a solution needs to be, depends on the economics of the problem. How much does it cost to find a better solution, to implement it and what is the benefit? We may not even know if a better solution exists. 2.1
Type of Problems
Many optimisation problems can be classified as one of the following: Continuum problems having decision variables which are continuous numbers. For example, the outlet pressure of a steam turbine. Discrete problems having decision variables which can only take discrete values. For example, the number of cooling towers to be built. Combinatoric problems are those where the decision variable is the order of a finite set of objects, which determines the value of the objective function. For example, the Travelling Salesman Problem (TSP) or the PWR reload core design problem described below. Optimisation methods have been developed to tackle problems in each of these categories. Table 1 gives a list of some of these methods. However, many practical optimisation problems encountered in industry do not fall neatly into one of the above categories as they involve a combination of continuous, discrete and/or combinatoric variables. These are much harder to solve with traditional methods. In these cases, the problem is often approximated into a form which can be handled by traditional methods. For example, a problem involving continuous and
GENETIC ALGORITHMS AND OTHER RECENT DEVELOPMENTS
115
discrete decision variables, might use continuous variables to approximate the discrete variables. In this paper, several different optimisation methods are described. Some are particularly suited to one category of problem, while others can be used on all three, singly or in combination.
2.2
The PWR Reload Core Design Problem
Most of the optimisation methods described in this review can be applied to combinatoric problems such as the PWR incore fuel management problem described in this section. As this problem is used to illustrate most of the optimisation methods reviewed in this paper, the problem and previous studies are described in some detail below. The Problem. For a Pressurised Water Reactor (PWR) incore fuel management involves specifying the arrangement of fresh and partially burnt fuel in the core and the burnable poison loadings in the fresh fuel assemblies. Most PWRs use a three batch loading scheme, i.e. at each refuelling, one third of the fuel is replaced. The remaining fuel assemblies, having resided in different regions of the core for one or two cycles already, are generally all different. Hence for a PWR with 193 fuel assemblies, the fuel placement problem alone (assuming there are 64 identical new fuel assemblies and the centre assembly, which is generally the assembly with the highest burn-up, has been specified) has (128!) possible solutions (since there are ways of choosing where to put the new fuel assemblies and 128! ways of arranging the others in the remaining spaces). The search space is usually reduced by assuming rotational or reflective quarter-core symmetry or one-eighth symmetry. However, even if quarter-core symmetry is assumed, fuel assemblies from equivalent locations in different quadrants of the core are not identical. A fuel assembly from one quadrant is identical to the corresponding assembly in a neighbouring quadrant rotated by 90°. Hence when working in (rotational) quarter-core symmetry, each fuel assembly can be considered to have four possible orientations each of which represents exchanging that assembly with the corresponding one from another quadrant. New fuel assemblies of course have uniform cross-section and therefore do not need to be re-orientated. Thus, if we consider the fuel placement problem in rotational quarter-core symmetry the number of possible solutions is (since in rotational symmetry we consider 48 fuel assemblies 16 of which are new). Although all the new fuel assemblies are identical the fuel manager may choose to load Burnable Poison (BP) rods with some of the new fuel assemblies that are not in
116
JONATHAN N. CARTER
control rod positions. It is usual to load each quadrant of the fuel assembly identically with a maximum of 24 BP rods per fuel assembly. Thus there are seven possible BP loadings for each assembly (0-6 BP rods on each fuel assembly quadrant). If we include burnable poison loading the search space contains about possible solutions. To summarise, to specify a core reload pattern, the fuel manager must specify for each location: the fuel assembly to go at that location the orientation of that fuel assembly (if it is a partially burnt assembly) the burnable poison loading on that assembly (if it is a new assembly). Objectives and Constraints The fuel manager’s objective is to minimise the cost of the energy generated by the power plant and early studies considered such factors as the interest on fuel, the re-processing costs and operating charges (e.g. Wall and Fenech5, Lew and Fenech6). However, because these costs may vary and there is no simple formulation of the cost function, it is general practice to work with cost-related objective functions such as: maximum End-of-Cycle (EOC) reactivity (equivalent to maximum cycle length) (e.g. Mélice7, Colleti et al. 8) maximum burn-up of fuel (e.g. Stover and Sesonske9, Hoshino10) minimum radial power peaking (e.g. Chen et al. 11, Naft and Sesonake 12, Federowicz and Stover13, Chitkara and Weisman14). The last of these is not a true economic objective (see Downar and Sesonske15) but as it is consistent with safety considerations, is frequently used as an objective in fuel management studies. Where it is not used as the objective function, it must be incorporated into the problem as a constraint. Some early studies sought to minimise the fresh fuel consumption (e.g. Suzuki and Kiyose16, Goldschmidt17) but as this must be determined well in advance, it is properly an out-of-core decision. The actual objective favoured in practice will depend generally on the utility but a practical optimisation tool should be flexible enough to work with any of the above. The constraints include limits on: maximum moderator temperature coefficient; maximum burn-up of discharged fuel; maximum average burn-up of each batch of discharged fuel; maximum power peaking; minimise pressure vessel damage. Previous Studies. Early fuel management studies used few-zoned one-dimensional reactor models with axial symmetry and tried to determine into which of these zones fuel assemblies should be placed (although not where exactly in the zones different fuel assemblies should be located) for a series of cycles. In the first of these, Wall and Fenech5 considered a PWR model with three equal volume zones, identified by increasing distance from the centre of the core, and three fuel batches which each occupied one
GENETIC ALGORITHMS AND OTHER RECENT DEVELOPMENTS
117
zone. At each refuelling, one of 28 options (since each batch could be replaced or moved to another zone) had to be chosen. They used dynamic programming (see Bellman18) to minimise the cost of the power produced subject to power-peaking and burn-up constraints. Stover and Sesonske9 used a similar method to identify Boiling Water Reactor (BWR) fuel management policies. Their model was similar to that of Wall and Fenech except the two interior zones were scatter-loaded and they optimised the fraction of each zone to be refuelled at the end of each cycle. Similarly, Fagan and Sesonske19 used a direct search to maximise the cycle length for a scatter-loaded PWR with fuel shuffling between zones permitted, and Suzuki and Kiyose16 used Linear Programming to place fuel in five radial zones to minimise the fresh fuel consumption of a Light Water Reactor (LWR). These studies did not address the poison management since parallel work was directed at solving this part of the problem independently for a given fuel loading (e.g. Terney and Fenech20, Motoda and Kawai21, Suzuki and Kiyose22). Indeed Suzuki and Kiyose16 used this decoupling to assign the problem of the power-peaking constraint to the poison management problem. Mélice7 took a different approach to the problem by surveying analytical techniques for determining reactivity profiles which maximised core reactivity or minimised power-peaking. The available fuel could then be used to synthesise the optimal reactivity profile as closely as possible. This approach also allowed the decoupling of the fuel placement and poison management scheme that would maintain the desired power profile. Mélice sought flat power profiles since these would enable the extraction of maximum power from the core. These led naturally to the out-in i fuel management schemes which were widely used at the time. Mélice’s fuel placement problem then was reduced to seeking the arrangement of partially-burned fuel in the core interior (the periphery being loaded with fresh fuel) that would best match the optimal reactivity profile. Thus, Mélice was the first to consider the detailed placement of fuel in a 2-dimensional lattice which he did by trial and error, guided by experience. Several authors extended this work using variational techniques (e.g. Wade and Terney23, Terney and Williamson24) or even interactive graphics (Sauer25) to identify ideal power distributions and Linear Programming to automate their synthesis (Sauer25, Chen et al. 11, Terney and Williamson24). These methods however either distributed fuel amongst but not within the several zones or restricted fuel to an out-in scatterloadedii core. Meanwhile the problem of determining optimal detailed placement of fuel assemblies was being tackled by considering the effects of successive binary exchanges of fuel assemblies. Having used heuristic rules to restrict the possible exchanges, Naft and Sesonske12 proposed ranking binary exchanges by the improvement in the objective function and then performing each in order of ranking, keeping the improvements. Similarly Stout and Robinson26 formulated shuffling rules for fuel within zones of a out-in scatter-loaded PWR. These direct search approaches reduce to a hill-climbing search since the best solution is preserved after each exchange. They are therefore prone to locating local rather than global optima.iii A simple direct search on all such exi Out-in refuelling is when old fuel is removed from the centre of the core, partially burnt fuel is moved from the outer edge to the centre of the core and new fuel is added to the edge. In-out refuelling is similar but the new fuel is placed in the centre. These different fuel loadings produce different performance profiles. ii Scatter loading is when new fuel is distributed throughout the core. iii The objective functions used are non-linear functions of the decisions variables, this means that finding optima is difficult and that multiple local optima often exist.
118
JONATHAN N. CARTER
changes is clearly too time-consuming so Chitkara and Weisman14 used a direct search to fine-tune the result obtained by linearising the objective and constraints and using Linear Programming. However, because they allowed fuel movement to neighbouring locations only, this method was also prone to convergence onto a local optimum. The method was later extended to BWR fuel management by Lin et al. 27 and Yeh et al. 28. Binary exchanges are one of the smallest changes that can be made to a loading pattern and are therefore useful for fine-tuning a reload core design. Small changes from a reference loading pattern also lend themselves to evaluation by perturbation theory at the cost of being limited to certain small perturbations only. This was exploited by Federowicz and Stover13 who used integer linear programming to find the best loading pattern close to some reference pattern. This pattern could then be used as the new reference pattern and the optimisation continued. Similarly, Mingle29 and Ho and Rohach30 used perturbation theory to evaluate the effects of binary exchanges during a direct search, enabling more candidate solutions to be examined without calling a time-consuming evaluation code more frequently. The size of the fuel placement problem prompted many researchers to divide it into sub-problems which could then be solved using the most appropriate optimisation technique. Motoda et al. 31 developed an optimisation scheme for BWRs using the methods of Sauer25, Suzuki and Kiyose16 and Naft and Sesonske12. The basic idea was to allocate fuel in three zones, expand this to a five zone model and finally use a direct search to shuffle the fuel within those zones. The poison management problem was decoupled by assuming the constant power Haling depletioniv 32 . However, the inflexibility of PWR control methods at that time precluded the use of this method for PWR fuel management. In the early 1980s, the development of burnable poison rods for PWRs prompted interest in increasing the burn-up of the fuel to further minimise costs. Ho and Sesonske33 considered changing from a 3-batch to a 4-batch scheme while maintaining the cycle length. Clearly higher enrichment fresh fuel would be required and this could cause power-peaking problems. Reload core design would thus be dominated by the power peaking constraint. They rose to this challenge by assuming a modified out-in loading and using a direct search similar to that of Naft and Sesonske12 to place fuel assemblies in one-eighth symmetry. Burnable poisons were used where necessary to suppress power-peaking but the orientation of fuel assemblies was not considered. However, the combination of out-in loading with higher enrichment fresh fuel leads to increased neutron leakage and thus an economic penalty as well as greater irradiation damage to the pressure vessel. An alternative way to increase the burn-up of fuel is to use low-leakage fuel loadings where the fresh fuel is allowed in the core interior. To keep the power-peaking within safety constraints, burnable poisons can be loaded onto fresh fuel assemblies. The resulting centre-peaked power distributions had already been shown to imply minimum critical mass (see Goldschmidt17 or Poon and Lewins34). By 1986, interest in extending pressure vessel life by reducing neutron leakage meant that low-leakage loadings were being used in over half of all PWRs (see Downar and Kim35). However, the optimisation methods described above assume the conventional out-in loading patterns. Many of them assign fresh fuel to the periphery and shuffle only partially burned fuel in the core interior. Low-leakage loadings require fresh and partially burned fuel to be shuffled and burnable poison loadings to be determined for the fresh fuel assemblies increasing considerably the size of the problem. iv Haling’s principle states that the minimum power-peaking is achieved by operating the reactor so that the power shape does not change appreciably with time.
GENETIC ALGORITHMS AND OTHER RECENT DEVELOPMENTS
119
In addition, because out-in loadings deplete to give flatter power profiles, the power poisons in low-leakage designs meant that even if the Beginning-of-Cycle (BOC) power profile was feasible, it did not imply that there would not be power-peaking problems later in the cycle. By this time, emphasis had shifted from optimising the arrangement of fuel over many cycles to optimising the single-cycle problem. Suzuki and Kiyose16 had shown earlier that cycle-by-cycle optimisation gave results that were within 1% of the multicycle optimum. Chang and Sesonske36 extended Ho and Sesonske’s direct method to optimise lowleakage cores by fixing the fresh fuel positions to enforce low-leakage. In a different approach, Downar and Kim35 separated the fuel placement from the burnable poison loading problem by assuming a constant power Haling depletion. A fuel loading could be chosen in the absence of poison, using a simple direct search of binary exchanges and then the core was depleted in reverse back to BOC to find the burnable poison loading that would satisfy power-peaking constraints. However, the inflexibility of PWR poison design meant that the optimal poison management schemes and the constant power Haling depletion were often not realisable. In practice the simplified models used by researchers made nuclear utilities reluctant to use their optimisation methods and actual reload cores were designed by expert engineers using heuristic rules and experience (see Downar and Sesonske15). As early as 1972, Hoshino10 investigated the incorporation of these heuristic rules into an automated optimisation procedure by using a learning technique to deduce the relative importance of various rules in refuelling a very simple reactor model with four equal volume zones and one fuel batch in each zone. More recently, there have been several investigations of heuristic search and the use of expert systems to apply heuristic rules (e.g. Moon et al. 37, Galperin et al. , 38, Tahara39, Rothleder et al. 40). While this approach has the potential to reduce unpredictability and variability of human designers and to retain the expertise of these fuel managers, it does not necessarily produce optimal loading patterns, being limited by the knowledge of those same people. It also becomes unreliable when faced with situations not previously encountered. Thus the challenge to produce an optimal Loading Pattern (LP) using a realistic reactor model remained. Computer codes available today include LPOP (Loading Pattern Optimisation Program) and FORMOSA (Fuel Optimisation for Reloads: Multiple Objectives by Simulated Annealing). Following the practice of Mélice and others whose work concentrated on finding and synthesising optimal power and reactivity profiles, LPOP was developed at Westinghouse by Morita et al. 41 and Chao et al42 , 43. Starting with a user-specified target power profile, a backward diffusion calculation is performed to find an equivalent reactivity distribution. This is then matched as closely as possible with the available fuel and BPs using integer programming. However, in general it is not possible to match exactly this power profile, which being typically based on low-leakage cores and design experience is not necessarily optimal. FORMOSA was developed by Kropaczek44, 45 at North California State University (NCSU) where the search for practical optimisation tools which make a minimum of assumptions led to the use of Monte Carlo direct search techniques (e.g. Comes and Turinsky46, Hobson and Turinksy 47). Any reactor model could thus be used and treated as a ‘black box’ and any combination of objective function and constraints used. Continuing along the lines of Federowicz and Stover13, perturbation theory was used to determine the effects of fuel shuffling from a reference LP. This approach tended to restrict searches to around the reference solutions but was refined by White et al. ,
120
JONATHAN N. CARTER
who introduced first-order48 and then higher-order49 Generalised Perturbation Theory (GPT). The latter is able to predict the effects of quite large perturbations including the movement of fresh fuel. FORMOSA combines GPT with the Monte Carlo search algorithm, Simulated Annealing, which is described later in this paper. Poon50, 51 has since shown that Genetic Algorithms can be used to speed up the identification of nearoptimal LPs. This work is described in more detail section 3.6. Since Poon’s work, the GA has been applied to incore fuel management by DeChaine and Feltus52, 53 and Tanker and Tanker54. These studies are discussed in section 3.7.
2.3
A Simplified Reactor Model
To illustrate how all of the algorithms, except the Multi-point Approximation method, described in this paper work, we will use a simplified, idealised reactor core containing a total of 61 fuel assemblies in quarter-core rotational symmetry, as shown in figure 1.v The optimisation problem is to arrange the fuel within the core to maximise some objective function while satisfying the necessary constraints. For the purpose of this study, we assume that the objective function is calculated by a ‘black box’ reactor simulator and that there are no constraints. This last assumption is not restrictive since any constraints could be incorporated into the objective function through a penalty function. We will assume that the central fuel element has already been selected (it is usually the oldest assembly, or the assembly with the highest burn-up) and we will use quartercore rotational symmetry. We will also make the following three simplifications to the problem. Firstly, rotational orientations are neglected (i.e. we do not allow fuel elements to be shuffled from one quadrant to another). Secondly, we give each new fuel element in the same quadrant a unique identifier, as if they were not identical (in practice, around one third of the fuel elements will be new and therefore identical. By giving each new fuel element in the quadrant a unique identifier, we avoid the complications of having to avoid exchanging two new, identical fuel elements). Thirdly, we neglect burnable poisons. These simplifications reduce the problem to finding the optimal arrangement of the fifteen fuel assemblies in the quarter-core. There are then different ways of rearranging the fuel in the core. Figure 2 shows one possible rearrangement. v The use of bold characters in figure 1 is just a naming convention and does not imply anything about the properties of the fuel elements.
GENETIC ALGORITHMS AND OTHER RECENT DEVELOPMENTS
121
This simplified incore problem is useful for the didactic purposes of this paper. In practice, it is not difficult to incorporate rotational orientations, identical new fuel elements and burnable poisons when using the optimisation schemes described in this paper. For example both Kropaczek44 and Poon50 show how this can be done, for Simulating Annealing and Genetic Algorithms respectively. For the purposes of this paper all of the examples will assume that we are trying to maximise some function. It should be remembered that any minimisation problem can easily be converted into a maximisation problem.
3 OPTIMISATION ALGORITHMS FOR COMBINATORIAL OPTIMISATION 3.1 Hill-climbing Algorithms Many optimisation algorithms proceed by making a small change to the ‘current’ solution to obtain a ‘trial’ solution. If this change results in an improvement, then the ‘current’ solution is replaced by the ‘trial’ solution. Otherwise the ‘current’ solution is retained. An algorithm of this type is known as a hill-climber. The problem with algorithms that follow this procedure is that they tend to get trapped by local, sub-optimum solutions. The two important decisions that have to be made when implementing a hillclimbing algorithm are firstly, how to define a ‘small change’ and secondly, how to choose the ‘trial’ solutions. A ‘small change’ will have different meanings for different problems. For the idealised incore problem that we are considering there are several possible definitions of ‘small’ change that define the local neighbourhoodvi relative to the ‘current’ solution. One choice might be to exchange two adjacent fuel elements, eg
An alternative might be to exchange any two fuel elements, eg vi
The local neighbourhood of a solution consists of all the solutions that can be obtained by making a small change to the solution. The neighbourhood is therefore dependent on the allowable ‘small change’.
122
JONATHAN N. CARTER
There are other possible choicesvii, but these are the simplest. The trade-off over the size of the local neighbourhood is that for small neighbourhoods (adjacent fuel element swap), the search converges rapidly to a local optimum. For larger neighbourhoods, convergence is slower but the final solution reached is likely to be better. The method employed to choose the fuel elements to be exchanged can either be deterministic or random (stochastic). These two methods lead to either deterministic hill-climbers or random hill-climbers.
3.2 Simulated Annealing The major problem with hill-climbing algorithms, is that when they converge to a local optimumviii they are then unable to escape and find the global optimum. This is because, starting at the local optimum, all moves in the local neighbourhood are worse and so are rejected. Figure 3 illustrates the concept of a local optimum for t