A COURSE IN APPLIED MATHEMATICS
OLUMl!
V
I of this work is devoted to
the mathematical theory of mecha nics and Vo...
235 downloads
4138 Views
8MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
A COURSE IN APPLIED MATHEMATICS
OLUMl!
V
I of this work is devoted to
the mathematical theory of mecha nics and Volume IT to the field theories of gravitation, electromagnetism and hydromechanics. The development is from first principles, but it is assumed that the reader has completed an Intermediate Course of mechanics and is studying for a First Degree, with applied mathematics as a pr incipal subj ect. The work is more than adequate as a text for the applied mathe ma tics section of Part TI of the London University General Degree (excluding the stat istics) and will also be found suitable for the course in natural philosophy leading to Part I of the Mathematics Tripos and mathematics courses for the applied arranged by other universities for their non-specialist mathematicians. Every effort has been made to assist those students who must depend largely upon their own resources when studying the subject. All arguments are given in full detail and the results are illustrated by numerous examples taken from examina tion papers set at Cambridge, London and the provincial universities. Each chapter
concludes with a comprehensive set of ex.ercises relating to its subject matter. The notation is modern and the techniques of vector analysis have been employed throughout. A knowledge of elementary vector algebra and calculus is assumed, but the more advanced ideas associated with the operators, 'div,' 'grad' and 'curl' have been developed ab initio as they are required. The fundamental laws of mechanics are carefully presented to be consistent with the special theory of relativity, and the difficulties associated with the definition of the electromagnetic field vectors in dielec trics and magnetic media arc also given
special consideration. Answers are provided for all the exercises and there is an index to each volume.
40/; net
A COURSE IN
APPLIED MATHEMATICS
PHYSICAL SCIENCE TEXTS Gmeral Editor
SIR GRAHAM SUT TON C.B.E., D.Sc., F.R.S. ,
Director-General, Meteorological Office, Formerly Dean of the Royal Military College of Science, Shrivenham, and Bashforth Professor of Mathematical Physics.
ADVANCED LEVEL APPLIED MATHEMATICS by c. G. LAMBE, B.A., Ph.D. APPLIED MATHEMATICS FOR ENGINEERS AND SCIENTISTS by c. G. LAMBE, B.A., Ph.D. ADVANCED LEVEL PURE MATHEMATICS by C. J. TRANTER, O.B.E., M.A., D.Sc. TECHNIQUES OF MATHEMATICAL ANALYSIS by C. J. TRANTER, O.B.E., M.A., D.Sc. GENERAL PHYSICS AND SOUND (To Advanced and Scholarship Level) by D. H. FENDER, B.Sc., Ph.D. HEAT (To Advanced and Scholarship Level) by A. J. WooDALL, O.B.E., Ph.D., F.Inst.P. LIGHT (To Advanced and Scholarship Level) by C. B. DAISH, M.Sc. ELECTRICITY AND MAGNETISM (To Advanced and Scholarship Level) by C. G. WILSON, M.Sc., A.Inst.P. EXPERIMENTAL PHYSICS (To Advanced and Scholarship Level) by C. B. DAISH, M.Sc. D. H. FENDER, B.Sc., Ph.D. A COMPENDIUM OF MATHEMATICS AND PHYSICS by DOROTHY S. MEYLER, M.Sc. SIR GRAHAM SUTTON, C.B.E., D.Sc., F.R.S. ELECTRON PHYSICS AND TECHNOLOGY by J. THOMSON, D.Sc. E. B. CALLICK, B.Sc. PRINCIPLES OF ELECTRONICS by M. R. GAVIN, M.B.E., D.Sc. J. E. HOULDIN, Ph.D. A COURSE IN APPLIED MATHEMATICS (Covering B.A. and B.Sc. General Degrees) by D. F. LAWDEN, M.A. PHYSICS FOR ELECTRICAL ENGINEERS by W. P. JoLLY, B.Sc.
In Preparation
REACTOR PHYSICS AND TECHNOLOGY by J. WALKER, Ph.D., F.Inst.P. D. ]AKEMAN, Ph.D., A.Inst.P. ELEMENTS OF MATHEMATICAL PHYSICS
A COURSE IN
APPLIED
MATHEMATICS By DEREK F. LAWDEN, M.A. Professor of Mathematics, University of Canterbury, New Zealand
VOLUME I Part I : Dynamics Part I I : Statics
THE ENGLISH UNIVERSITIES PRESS LTD 102
NEWGATE STREET
LONDON, E.C.l
Firstprinted 1960
© Copyright Derek F. Lawden, 1960
Printed in Great Britain for the English Universities Press, Limited, by Richard Clay and Company, Ltd., Bungay, Suffolk
GENERAL EDITOR'S FOREWORD
by
SIR GRAHAM SUTTON, C.B.E., D.Sc., F.R.S.
Director-General, Meteorological Office, Formerly Dean of the Royal Military College of Science, Shrivenham, and Bashforth Professor of Mathematical Physics
THE present volume is one of a number planned to extend the Physical Science Texts beyond the Advanced or Scholarship levels of the General Certificate of Education. The earlier volumes in this series were prepared as texts for class teaching or self-study in the upper forms at school, or in the first year at the university or technical college. In this next stage, the treatment necessarily assumes a greater degree of maturity in the student than did the earlier volumes, but the emphasis is still on a strongly realistic approach aimed at giving the sincere reader technical proficiency in his chosen subject. The material has been carefully selected on a broad and reasonably comprehensive basis, with the object of ensuring that the student acquires a proper grasp of the essentials before he begins to read more specialized texts. At the same time, due regard has been paid to modern developments, and each volume is designed to give the reader an integrated account of a subject up to the level of an honours degree of any British or Commonwealth university, or the graduate membership of a pro fessional institution. A course of study in science may take one of two shapes. It may spread horizontally rather than vertically, with greater attention to the security of the foundations than to the level attained, or it may be deliberately designed to reach the heights by the quickest possible route. The tradition of scientific education in this country has been in favour of the former method, and despite the need to produce techno logists quickly, I am convinced that the traditional policy is still the sounder. Experience shows that the student who has received a thorough unhurried training in the fun damentals reaches the stage of productive or original work very little, if at all, behind the man who has been persuaded to specialize at a much earlier stage, and in later life there is little doubt who is the better educated man. It is my hope that in these texts we have provided materials for a sound general education in the physical sciences, and that the student who works conscientiously through these books will face more specialized studies with complete confidence. v
PREFACE Mv intention has been to write a book on applied mathematics which will be of assistance to students reading for science degrees at a level lower than that of Honours. It is assumed that the reader has suc cessfully completed a course of study in the subject to the Inter mediate standard of his degree course or to the Advanced Level of the General Certificate of Education. It is also assumed that the reader will be attending a course of lectures in pure mathematics, during which he will study the theory of linear differential equations, both ordinary and partial, the definition and evaluation of surface and volume integrals and the notation and techniques of vector analysis. All these branches of the subject are now common to the courses arranged for this class of student by the various university bodies in the United Kingdom. Vector methods have accordingly been employed without comment at any point in the argument where it was felt they arise quite naturally. However, no previous knowledge of the properties of the vector operators " grad ", " div " and " curl " is assumed of the reader, these being developed ab initio as required. Since it is expected that the majority of the book 's readers will not be mathematical specialists, who could be expected to complete for themselves an argument not made fully explicit, very few links have been omitted from the chains of reasoning, with the result that the reader of average ability should be able to make considerable progress without outside assistance. This should commend the work to those many students who read for External General Degrees of London University by part-time attendance at technical-college classes. However, a serious attempt has been made to present a fairly complete logical structure. I have not therefore avoided diffi cult passages in the development of the subject, either by ignoring them, appealing to the reader's intuition or by offering an argument by analogy. The use of any of these stratagems may be justified in a book written for use by engineers or others who are primarily inter ested in acquiring the facility to use a tool. However, it is assumed that the readers of this book are motivated, at least partially, by a desire to study applied mathematics for its own sake as an �sthetic ally pleasing and elegant structure. Those engineers who appreciate that a proper understanding of the tools they employ will greatly assist them in their efficient use, should also find the book helpful. Another type of student to which the book may appeal is the man who is reading for Honours in mathematics but who, for one reason or vii
viii
P RE FACE
another, finds that the texts to which he is referred make too great a demand upon his abilities. The book should carry such a student a long way towards his goal, after which he may feel sufficiently con fident to study more comprehensive texts. The subject matter of the book divides into four parts, Part I Dynamics (Chapters 1-10}, Part II Statics (Chapters l l-13), Part III Field Theory (Chapters 14--18}, Part IV Hydromechanics (Chapters 19-21}. Part I includes a detailed discussion of the dynamics of a particle and of a rigid body moving in a plane, and an introduction to the theory of the general three-dimensional motion of a rigid body. This introduction explains how considerations of angular momentum may be employed to derive Euler's equations for the motion of a rigid body pivoted at a fixed point, establishes Lagrange's equations and illustrates their application by a number of easy problems on three dimensional motion. In Part II equations of equilibrium for a system of rigid bodies acted upon by a three-dimensional system of forces are derived as particular cases of previously established dynamical equa tions. This Part concludes with an introduction to the theory of elasticity. Part III gives an account of the Faraday-Maxwell theory of the electro-magnetic field together with an introduction to the Newtonian theory of gravitational attraction. The equations of the electro-magnetic theory are expressed in terms of an unrationalized Gaussian system of units, since the examination papers of the various university bodies which have been consulted indicate that such a system is normally employed by mathematical departments in their teaching. However, an appendix has been added at the end of this Part, in which an explanation of the advantages to be gained from rationalizing the unit system is given and the Giorgi system is described and related to the system employed in this book. In Part IV the equilibrium of a fluid in a general gravitational field is discussed. A chapter is devoted to the one-dimensional flow of an ideal fluid in a smooth pipe, the theory being illustrated by the problem, now very topical, of the rocket motor. The general equations of motion of an ideal fluid are obtained in a final chapter and the characteristics of a number of simple irrota tional flows and flows due to rectilinear vortices are investigated. By analogy with electrostatics, the velocity potential cp is related to the flow velocity by the equation q = -grad cp. Throughout the book important results and principles are illustrated by worked examples, some of which are original but many of which have been taken from examination papers set by the following bodies : Birmingham University (B.U.) Cambridge University (Mathematical Tripos) (M.T.) Durham University (D.U.) Leeds University (Le.U.)
P R E FA C E
ix
Liverpool University (Li.U.) London University (L.U.) Manchester University (M.U.) Nottingham University (N.U.) Queen's University, Belfast (Q.U.) Sheffield University (S.U.) Other problems, from the same sources, for working by the student, will be found in the sets of exercises at the ends of the chapters. The source of each such example or exercise is indicated according to the abbreviation scheme shown above. The author wishes to express his thanks to the bodies concerned for permission to make use of this material. The author is also indebted to Sir Graham Sutton, F.R.S., for a number of suggestions which have led to improvements in the text and to his brother, Mr. J. G. Lawden, who is responsible for the pre paration of the figures and diagrams. D. F. LAWDEN
University of Canterbury
CONTENTS PART I : DYNAMICS
l.
KINEMATICS OF A PARTICLE
.
l .l. The Velocity Vector 1 .2. Components of the Velocity Vector 1 .3. The Acceleration Vector 1 .4. Components of the Acceleration Vector .
3 3 5 10 12
2. NEWTON'S LAWS. RECTILINEAR MOTION . 2.1. Newton's Laws of Motion 2.2. Work and Power . 2.3. Rectilinear Motion of a Particle 2.4. Damped and Forced Oscillations
20 20 24 27 42
3. CARTESIAN AND INTRINSIC RESOLUTES OF ACCELERATION . 3.1. Resolving the Equation of Motion . 3.2. Cartesian Components. Projectiles 3.3. Cartesian Components. Elliptic Harmonic Motion . 3.4. The Energy Equation . 3.5. Tangential and Normal Components. Motion on Wires
55 55 55 66 69
4. PoLAR 4.1 . 4.2. 4.3. 4.4. 4.5. 4.6.
73
85 Central Forces 85 88 Inverse Square Law The Energy Equation 92 Time in an Orbit . 99 101 Kepler's Laws The pr-Equation of an Orbit. Elliptic Harmonic Motion . 103 4.7. Motion on Rotating Wires 106 4.8. Motion on Surfaces of Revolution . 1 10 RESOLUTES OF AccELERATION
5. IMPULSIVE MOTION OF PARTICLES 5.1. Impulse and Momentum 5.2. Newton's Third Law . 5.3. Impact of a Pair of Particles xi
118 118 121 124
xii
CONTENTS
6. MOTION O F A PARTICLE S YSTEM I . 6.1. Systems Involving a Small Number of Particles 6.2. Vibration of Two Particles. Normal Modes 6.3. Energy Equation for a Particle System . 6.4. Kinetic Energy of a Rigid Body . 6.5. Conservative Systems of one Degree of Freedom. Stability of Equilibrium. Small Oscillations 6.6. Stability of Rocking Bodies .
131 131 133 139 145
7. KINEMATICS OF A RIGID BODY. MOMENTS OF INERTIA 7.1. Instantaneous Centre. Space and Body Centrodes . 7.2. Motion of a Rigid Body about a Fixed Pivot 7.3. General Three-Dimensional Motion of a Rigid Body 7 .4. Moment of Inertia of a Lamina 7.5. Moment of Inertia of a Solid Body 7.6. Equimomental Systems
169 169 173 177 179 182 185
8. M OTION OF A PARTICLE SYSTEM-II 8.1. Equation of Motion of the Mass Centre . 8.2. Conservation of Linear Momentum 8.3. Isolated Systems. 8.4. Equation of Angular Momentum 8.5. Conservation of Angular Momentum 8.6. Angular Momentum of a Rigid Body in General Motion 8.7. Equation of AM for a Rigid Body in General Motion 8.8. Initial Motion of a Rigid Body 8.9. Motion with Variable Mass
191 191 197 201 203 205
-
.
152 159
208 210 214 215
9. IMPULSIVE M OTION OF A RIGID BODY 226 9.1. Equations of Linear and Angular Momentum for Impulsive Motion 226 9.2. Elastic Impact of Rigid Bodies 232 10. THREE-DIMENSIONAL M oTION. LAGRANGE ' s E QUATIONS 10.1 . Rotating Frames of Reference 10.2. AM of a Rigid Body Rotating about a Fixed Pivot 10.3. Euler's Equations 10.4. Kinetic Energy of a Rotating Rigid Body 10.5. Lagrange's Equations . 10.6. Small Vibrations. Normal Modes .
240 240 241 241 246 253 261
CONTENTS
xiii
PART II : STATICS
11.
EQUILIBRIUM AND E QUIVALENCE OF FORCE SYSTEMS
Equilibrium of a Rigid Body Equivalence of Force Systems Parallel Forces. Centres of Mass . Inertial Forces. Centrifugal Force The Principle of Virtual Work
271 271 276 282 284 285
12. E QUILIBRIUM OF STRINGS AND CHAINS 12.1. General Equations of Equilibrium . 12.2. String Hanging in Equilibrium under Gravity 12.3. String in Contact with a Cylinder .
296 296 297 303
13. DEFORMATION oF ELASTIC B oDIES . 13.1. Internal Forces and Deformations . 13.2. Shearing Force and Bending Moment 13.3. Extension of a Bar 13.4. Flexure of a Beam 13.5. Whirling Shafts . 13.6. Analysis of Strain 13.7. Analysis of Stress 13.8. Generalization of Hooke's Law 13.9. Simple Cases of Elastic Deformation
309 309 310 315 316 322 324 330 335 337
A NSWERS INDEX
348
11.1. 1 1.2. 1 1 .3. 11.4. 11.5.
PART I DYNAMICS
CHAPTER 1
KINEMATICS OF A PARTICLE 1.1. The Velocity Vector
A particle is defined to be a body whose dimensions are negligible to the degree of accuracy in linear measurement to which we choose to work. The Earth is a body of approximately 4000 miles radius, whereas the radius of its orbit about the Sun is over 93,000,000 miles. If, therefore, it is sufficient for our purpose to specify the orbit to an accuracy of 0·1 per cent, the Earth may be treated as a particle. This we shall do in Chapter 4. Since, in the sense just explained, a particle has no extension, it is conveniently represented by a Euclidean point. Rotation of a particle cannot be detected without improvement in the accuracy of measure ment. It follows that its motion is completely specified by that of the point. Let P (Fig. l.l) be a point representing a particle at some time t. Let 0 be any identifiable point in the neighbourhood of P (e.g., the z
X
FIG.
1 . 1 .-Position Vector of a Particle
centre of the Sun when we are discussing the motion of a planet). 0 is not necessarily " fixed" ; indeed, we have not yet stated the mean ing we shall attach to this term. Take 0 as the origin of rectangular Cartesian axes Ox, Oy, Oz in any identifiable, mutually perpendicular, directions (e.g., so as to pass through three known stars). These directions also are not necessarily " fixed". For example, it may be 3
4
A CO U R S E I N A P PLI E D M A T H E MA T ICS
[CH.
convenient to allow them to rotate with the Earth when we are dis cussing the motion of a projectile in its vicinity. These axes con stitute a frame of reference against the background of which the motion of P may be described. The position of P at time t may now be fixed
-+
by its coordinates (x, y, z) or, alternatively, by the vector OP. This vector is, accordingly, referred to as the position vector of P, and will be denoted by r. The quantities (x, y, z) are the projections of r upon the coordinate axes, and are therefore its components. r varies both in magnitude and direction as P moves ; i.e., r is a function of t. At time t + l>t, let the particle be at P', a point with position vector r + l>r. It follows-+from the triangle law of addition of vectors, that l>r is the vector PP'. Consider the vector l>rjl>t, i.e., a vector in the direction of l>r, but differing from this vector in magnitude by a factor ljl>t. As l>t -+ 0 this vector tends to a limit both in magnitude and direction. The limit vector is termed the derivative of r with respect to t and is denoted by drjdt. This derivative clearly provides us with a precise measure of the rate of change of the position of the particle P at the instant t relative to the frame of reference. It is accordingly accepted as the definition of the velocity of P relative to this frame and at this instant. Denoting the velocity vector by v, we have
dr V = -· dt
(1.1)
Before this definition of velocity is acceptable, we must show that it is in accord with the more or less vague ideas concerning this quantity commonly held. As l>t -+ 0, P' approaches P along the particle's path and l>r approaches the direction of the tangent to this track at P. The direction of the velocity vector is therefore along this tangent and specifies the direction of the motion of the particle in the frame of reference. Let A be any fixed point on the path of P and let s denote the length of the curve j oining A and P. s will be reckoned positive if the particle arrives at P after it has passed through A . Then the arc PP' may be denoted by l>s. As at -+ 0 and P' approaches P, the ratio PP'jl>s approaches unity. It follows that the limits of the ratios P P' jl>t and l>sjl>t are identical. But the first ratio is the mag nitude of the vector l>rjl>t and has limit JdrjdtJ. The limit of the second ratio is dsjdt = s. Hence
v = Jvl = ���� = s,
(1.2)
i.e., the magnitude of the velocity vector is the rate of increase of the distance of the particle from a fixed point on its path. v is termed the speed of P. Now suppose that each of two observers, moving relatively to one
1]
5
KI NEMATICS OF A PARTICLE
another, assesses the motion of P against the background of a reference frame which is fixed relative to himself. Let Oxyz, O'x'y'z' (Fig. 1 .2) be the two frames and suppose that corresponding axes always remain parallel, i.e., there is no relative rotation of the frames. Let r be the position vector of P relative to the first frame and r ' the position z
FIG. 1.2.-Relatively Moving Frames
vector of P relative to the second frame at the instant t. If p is the position vector of 0 in the second frame at the same time, we have r' = p + r.
Differentiating this equation with respect to the time or
r'
=
i.l + r,
v' = V + v,
(1.3)
t, we obtain (1.4) (1.5)
where v is the velocity of P relative to the first frame, v' is the velocity of P relative to the second frame and Vis the velocity of 0 in the second frame, i.e., of the first observer relative to the second. Equation (1.5) shows that, to calculate the velocity of a particle relative to a new frame of reference, to the velocity in the old frame we must add vectorially the velocity of this frame relative to the new. 1.2. Components of the Velocity Vector
The velocity vector, like any other vector, may be regarded as the vector sum of three vectors in any three non-coplanar directions. The magnitudes of these three vectors are the components of the velocity in these three directions. Consider the motion of a particle moving in a plane. If two of the
A CO U R S E I N A P P L I E D M A T H E M A T ICS
6
[cH.
component directions lie in the plane and the third does not, the velocity component associated with the latter direction will be always zero and we shall ignore it. Suppose that the remaining pair of directions are taken, one along the tangent and one along the normal to the particle's path at the instant t. Since v is a vector of magnitude s in the direction of the tangent, (s, 0) are the tangential and normal components of the velocity respectively. Let the axes Ox, Oy of the frame of reference be taken in the plane of motion and let (x, y) be the coordinates of P at time t. Then, if i, j are unit vectors in the directions of the axes, the position vector of P is given by r = xi+ yj. . (1 .6) Differentiating with respect to t, since i and j are constant in magnitude and direction, we obtain
v = drjdt = xi + yj. Thus, the Cartesian components of velocity are (.i, y).
(1.7)
This result does not depend upon the axes being rectangular, although it will generally be convenient to regard them so. If the axes are rectangular, squaring equation (1.7), we find that
(1.8) since i j = 0. Let (r, e) be the polar coordinates of P relative to a pole 0 and initial line Ox in the plane of motion (Fig. 1 .3 (a)). Then, if p, q are ·
(b)
(a) FIG.
1.3.-Polar Components of Velocity
unit vectors along and perpendicular to in the figure) respectively, we can write
r = rp.
OP
(in the senses indicated
(1. 9)
1]
KINEMATICS OF A PARTICLE
7
Differentiating, there results
v = rp + rp.
(l.lO)
Since p is not necessarily constant in direction, its derivative is not, in general, zero. In time l';t, e will increase by 1';6 and p will accordingly rotate through this angle into the position of p + 'i';p (Fig. 1.3 (b)). The magnitude of p + 'i';p is unity and hence, with p and 'i';p, forms an isosceles triangle with equal unit sides. From this triangle, we conclude that I 'i';p I = 86, to the first order. Hence .
'i';p
I I = 1"1m l';t = e.. 1';6
I p I = 1"1m &
But, as l';t ---+ 0, the angle between and thus the limiting direction of that
p and 'i';p approaches a right angle l';pjl';t is that of q. It now follows p = 6q. (1.11)
Similarly, the reader should prove that q=
-6p. (l.l2) Substituting from equation (1.11) into equation (1.10), we find that v = rp + r6q, (l.l3) i.e. the components of v along and perpendicular to OP are (r, r6) respectively. These are the polar components of velocity. Squaring equation (1.13), we obtain (l.l4)
6 is the rate of rotation of OP relative to the frame of reference. It is termed the angular velocity of P about the point 0. The velocity of P being known, its angular velocity may be calculated from the formula (l.l5) Example 1. A point A moves in a counter clockwise direction round a circle of centre 0 and radius a with angular velocity wv and a point B moves counter
clockwise round a concentric circle of radius 2a with angular velocity w2• If 6 is the angle OAB when the relative velocity of A and B is parallel to the line A B, prove that
provided that w1 � 2w2 •
tan2 6 -
"'•
"
- 4w•" 3wa•
Find also the speed of B relative to A at that instant.
(L.U.)
8
A C O U R S E I N A P PL I E D MATHEMAT I C S
[CH.
The velocities of A and B are aw1 and 2aw 2 respectively in the directions shown and relative to a frame within which 0 is stationary. Relative to an observer moving with A, this frame has a velocity aw1 in the opposite sense to that of A 's velocity. The velocity of B relative to A is therefore found by adding vectorially A 's velocity reversed to that of B. This is shown in the diagram. This rela tive velocity is in the direction BA , and hence, if it is resolved into components along and perpendi cular to AB, the latter component is zero. But this component is the sum of the components of the vectors of which it is the sum. We therefore have the equation 2aw 2 cos L OBA - aw1 sin (a - 90°) = 0 cos L OBA =
-
sin• L OBA = 1
�
2w 2
cos a
w• - 1 2 cos• a. 4w. Applying the Sine Rule to the triangle OAB, we obtain sin L OBA = t sin a, and then, from equations (i) and (ii), w• tsin• a = 1 - 1 2 cos• a. 4w. Whence, dividing by cos2 a, 2 w2 w ttan2 a = sec• a - -1-2 = 1 + tan• a - -1 , 4w 22 4w2 and the result stated follows by solving for tan2 a. The component of the relative velocity in the direction BA is aw1 cos (a - 90°) - 2aw 2 sin LOBA = awl sin a - aw. sin a (using equation (ii)) = a(wl - w.) sin a. -
(i) (ii)
A ship A is moving due East with constant speed u, whilst a second ship P is moving due North with constant speed 2u, and a third ship Q is moving North-east with constant speed 2y2u. When A is at a point 0, it is observed that P and Q cross the track of A simultaneously at distances a and 2a respec tively ahead of A . Prove that, when OA = x, the line joining A to the mid point of PQ is rotating in space about the vertical through A with angular velocity l2au
Example 2.
9a2 + 16x2 (L.U.) Let 0, B, C be the initial positions of the ships A , P, Q respectively. Take axes Ox and Oy as shown. The Cartesian components of the velocities of P and Q are (0, 2u) and (2u, 2u) respectively. At time t after the ships are
1]
K I NE M ATICS O F A PARTICLE
9
collinear, the coordinates of P are (a, 2ut) and of Q are (2a + 2ut, 2ut) . If M is the mid point of PQ its coordinates are (ta + ut, 2ut), and hence its Cartesian velocity components are (u, 2u). A has velocity components (u, 0) and the velocity components of M relative to A are accordingly (0, 2u). If LMAx = 6 the resolute of this relative velocity perpendicular y
0
to A M is 2u cos a. Employing equation (1. 1 5), we find that the angular velocity of M about A is w, where 2u cos e. w = AM
But cos a A N{AM. Also, since A is the point (ut, 0) at time t, A N = ta and A M2 = :t-a• + 4u2t2 • Hence
=
3au N "' = 2uA = • :t-a + 4u2t2 = A M•
where x = ut = OA.
12au 9a2 + 1 6x2'
A n aircraft, moving along a straight track with uniform speed v, is under attack from a guided missile. The missile moves with constant speed nv, its motion being always directed towards its target. Show that the polar equation ofthe track of the missile, as observed from the aircraft, is
Example 3.
�r = sin a tan"!a.
where the aircraft has been taken as pole and its direction of motion as the initial line. Deduce that, unless the missile's speed is greater than that of the target, the latter cannot be hit.
Relative to the aircraft, a frame stationary relative to the ground has velocity v in a D 1 R E c11 oN oF direction opposite to that of the o L..:.:...--.l. A"" j_c_M_O_T_iO_N______.,. aircraft's own motion. Relative to the aircraft 0, the missile P accordingly possesses a velocity which is the vector sum of : (i) its velocity nv relative to the ground in the direction PO, and (ii) the velocity v of the ground relative to the aircraft.
10
A CO U R S E I N A P P L I E D MATH EMAT ICS
[CH.
Taking polar coordinates as shown in the diagram, we find that the polar resolutes of P's velocity are (i) r = -nv - v cos 6 r6 = v sin 6. (ii) Dividing (i) by (ii), we obtain 1 dr = -n cosec 6 - cot 6. rde Integrating with respect to 6, we find that log r = -n log tan !6 - log sin 6 + constant, and hence r = A cosec 6 cotn !6 :i = sin 6 tann !6, r
where A is a constant depending on the initial conditions. If the missile is to destroy the target, r must approach zero for some value of 6. This implies that A fr -+ oo. Now tan !6-+ oo as 6-+ 1r. Let 6 = 1r £. Then sin£ ,;, _ £_ = sin£ cotn !£ = = 2n£1 -n :i_ ' tann !£ (!£)n r 1 -n where £ is small. As £-+ 0, £ -+ oo if n > 1. This implies that the missile will reach the target if its velocity is greater than that of the target. -
·
1.3. The Acceleration Vector
The acceleration of a particle is defined to be the rate of change of its velocity. The acceleration vector is therefore derived from the velocity vector in the same way that this vector is derived from the
0
c
(b)
(a)
FrG. 1.4.-The Hodograph
position vector. Let v be the velocity of a particle P at time t (Fig. 1.4 (a)). Take v to be the position vector of a point Q relative to a frame having origin C (Fig. 1.4 (b)). As v varies with the time, the point Q will move so as to trace out some locus. This locus is called the hodograph of the motion of P. At time t + at, the particle will have
1]
K I N E M AT ICS O F A P A R T ICLE
11
moved t o P' and the velocity vector will have changed to v + av. � The point Q will have travelled along its locus to Q', where QQ' = ; as at� 0, is called the acceleration av. The limit of the vector av u vector of the particle at the time t and is denoted by f. We have, therefore, f
= dv dt .
(1.16)
Since v is the position vector of Q, f is clearly the velocity of this point and is in the direction of the tangent to the hodograph at Q. Now suppose that two observers assess the motion of P relative to two frames of reference, the first of which possesses a velocity V relative to the second and neither of which is rotating relative to the other. The velocities of P relative to the frames are related by equation (1.5) . Differentiating this equation with respect to the time t, we obtain the equation f'
=
F + f,
(1.17)
where f = v is the acceleration of p relative to the first frame, f' = v' is the acceleration of P relative to the second frame and F = V is the acceleration of the first frame relative to the second. Equation (1.17) shows that to calculate the acceleration of a particle relative to a new frame, we must add to its acceleration in the first frame the acceleration of this frame relative to the new. Calculate the acceleration vector of a particle which moves around a circle of radius a with uniform angular velocity w. The velocity vector is of constant magnitude aw and, being always perpen
Example 4.
dicular to the radius through the particle, rotates with angular velocity
w.
The point Q accordingly describes a circle of radius aw (the hodograph) with angular velocity w and the magnitude of its velocity vector is aw2• This, then, is the magnitude of the acceleration vector of the particle. The direction of Q 's velocity is perpendicular to CQ, i.e., is in the direction PO. The direction of P's acceleration vector is therefore also along PO.
12
1.4.
A C O U R S E I N A P PL I E D M A T H E M A T I C S
[CH.
Components of the Acceleration Vector
In this section we shall obtain expressions for the components of the acceleration of a particle moving in a plane, in the three pairs of direc tions in which we have already resolved the velocity vector. Differentiating equation (1.7) once again with respect to t, we find that (1. 18) f = dvfdt = xi + yj. Thus the Cartesian components of acceleration are (x, y) . Also, a further differentiation of equation (1.13) yields f
= rp + rp + r6q + riiq + r6q.
Substitution from equations (1. 1 1) and (1.12) for p and q permits us to write the latter equation in the form
f = (r
r62)p
-
+ (rii + 2i6)q.
(1.19)
Equation (1. 19) indicates that the polar components of acceleration are r- r62 along OP, (1.20) and rii + 2i6 = (r26) perpendicular to OP.
}
��
Let t, n be unit vectors along the tangent and normal to the path of the point P, t being in the direction of motion and the rotation from t through a right angle to n being anti-clockwise (Fig. 1 .5). If t
t
/
/
" /
/;\
--���---�----------------- X
FIG. 1 .5.-Unit Tangent and Normal
makes an angle � with the x-axis, by a method similar to that used to derive equations (l.ll) and (1 . 12), the following equations may be obtained, (1.21)
K I N E M AT ICS OF A P A R T I C L E
1].
Employing the notation of Section
v = st.
Differentiating, this yields
f=
1.2,
13
(1.22) (1.23)
st + .st = st + .s�n.
Thus the tangential and normal components of acceleration are
(s, .s�).
Writing s = v, the tangential components of acceleration can be written in any of the equivalent forms , _ 11 -
_
dv ds dv d l 2 s - dv dt - ds di - v ds - ds ( zV ) • .
.
_
_
_
(1.24)
The normal component of acceleration can also be manipulated into a number of forms thus
In = s� = v� = v
�� �
= KV 2
= v2jp,
(1.25)
where K is the curvature and p the radius of curvature of the particle's trajectory at P. The thrust operating on a rocket in free space is directed so that the acceleration is always in a direction making a constant angle "' with the velocity . A ssuming plane motion show that, if v. is the speed at the commencement of the manreuvre, v is the speed of any later instant and .p is the angle through which the velocity vector has rotated from its initial direction at this instant, v = v.e.Pcota. Deduce that, if the rocket moves in a circle of radius a, v.a tan "' V= a tan "' - v.t ' where t is the time measured from the commencement of the manreuvre. The tangent to the rocket track makes an angle .p with the initial direction
Example 5.
of motion. Taking this latter direction as that of the x-axis of the frame of reference, we see from equations (1.24) and (1.25) that the tangential and normal components of the acceleration are v and v� respectively. Sine� the acceleration makes an angle a with the tangential direction
�v = tan
<X,
1 dv v d.f = cot"'· Integrating with respect to .p,
J
v d.f d.p = l dv
J
dv v
= .P cot "' + constant
log v = .p cot a + constant v = Ae.Pcota, where A is an arbitrary constant. But v = v., when .p = 0 and hence A =v Thus, (i) •.
14
A CO U R S E IN A P P L I E D M A T H E M A T ICS
[CH.
If s is measured along the track from the initial position of the rocket and the latter moves around a circle of radius a, then s = a.p. Hence v = s = a:.p and equation (i) yields di/J = dt dt di/JIntegrating with respect to .p,
� eo/1 cota.
a
!!_ e-o/1 cota.
v.
•
t = constant - � tan IX e-o/1 cot a. v.
(ii)
When .p = 0, t = 0 and hence the constant is !!_tan et . We can now v. solve for e.Pcot a in equation (ii) to obtain a tan et . e.Pcot<X= a tan IX- v.t Substituting in equation (i) for e.Pcot<X, we find v.a tan et v= a tan et- v.t Assuming that IX is a positive acute angle, so that tan et is positive, this •
equation shows that as t increases towards '
!!_
v.
tan a, v---+ oo. The circular
course cannot therefore be maintained for a time greater than
!!_
v.
tan a.
A particle, initially at rest at the origin, moves in a plane with an acceleration that is the resultant of a constant radial acceleration f outwards and a variable acceleration equal to 2w times the velocity in a v direction perpendicular to the velocity, where w is constant. Show that its angular velocity about the origin is equal to w f and find the polar equation of its path, taking the direction of f at the origin as the initial line. (M.T.)
Example 6.
Resolving the acceleration component 2wv radially and transversely, we obtain the components - 2wv sin cp and 2wv cos q, respectively. Equa tion ( 1 . 1 3} shows that these 0 components can also be written in the form - 2wr6, 2wr. The total acceleration in the radial direction is accordingly f - 2wr6 , and in the transverse direction is 2wr. This fact is expressed by the equations ;; - r() 2 = f - 2wr6 , (i)
� :e (r26)
=
(ii)
2wr.
From equation (ii), we obtain
:e (r26) = 2wrr
=
w
#t (r2) .
1]
K I N E M A T ICS O F A P A R T ICLE
15
Integrating with respect to it follows that •� wr• + constant � w + :i.
t, r = =
r• re -+
a:J as 0. But the particle Unless A = 0 , the transverse velocity 0. We conclude that A = 0. Hence � is at rest when w, i.e., the angular velocity of the particle about the origin is w. Substitution for� in equation (i) yields r+ w•r The general solution of this differential equation is
r=
r-+
=
= f.
r = B cos wt + C sin wt + wJ,., B and C being arbitrary constants. When t = 0, r = r = 0, i.e., f B + ;;;2 = 0, wC 0. B = -f/w2 and C 0. Thus Hence r wJ. (1 - cos wt). (iii) Since the angular velocity of P about 0 is w and 8 = 0 at t = 0, 8 = wt. Equation (iii) is therefore equivalent to r I.w (1 - cos 8), =
=
=
=
and this is the polar equation of the path (a cardioid).
0 is the centre of a circular wire and A is a point on its circumference. A bead P moves around the wire with uniform angular velocity w relative to the wire, whilst the latter rotates about A in the same sense with angular velo city !(1 + y3)w. If ON is perpendicular to A P and M is the mid point of ON, prove that the acceleration ofthe bead at any instant is -+ {4 + 2y3)w2 • PM.
Example 7.
p
Suppose the bead is at A', diametrically opposite to A, X at 0. Let AX be the position of A A ' at this in stant. At a later instant the wire will have rotated through the angle !(1 + y3)wt and the radius OP LAPO = through an angle wt, as shown in the diagram. Then LPAO
t=
t,
= Take A as pole and AX as the initial line of polar coordinates (r, 6) of the
}-wt.
bead. Then
where
a
6 = LPAX = !(2 + y3) wt, AP = 2AN = 2 cos }-wt, is the radius of the wire.
r=
a
(i) (ii)
16
A COURSE I N APPLIED MATHEMATICS
From (i),
&
From (ii),
=
[CH.
!(2 + y3)w.
r = -law2 cos lwt. The polar components of the acceleration of P are therefore,
!r
fo
=
rA•
r-
= -law2 cos lwt- !aw2(2 + y3)2 cos lwt = -aw2(4 + 2y3) cos !wt
= -(4
=
=
=
I d
r dt
I d
r dt
+ 2y3)w2• NP
(r•A) [a2 (4 + 2y3)w cos• lwt]
-a2(4 + 2y3)w2 cos lwt sin !wtf2a cos lwt -law2(4 + 2y3) sin lwt = -!w2(4 + 2y3)0N = -w2(4 + 2y3)MN. =
fr is therefore representable, both in magnitude and direction, by the --+ vector (4 + 2y3)w2• PN. fo is similarly representable by the vector --+ (4 + 2y3)w2• NM. The total acceleration of P is now given by the vector sum --+
--+
(4 + 2y3)w2 • PN + (4 + 2y3)w2• NM
=
--+
--+
(4 + 2v3)w2 • (PN + NM) --+
= (4 + 2y3)w2. PM.
EXERCISE 1
P and Q are moving around two coplanar circles in the same sense and with the same angular velocities w. If a is the distance
I. Points
between the centres of the circles and oc is the acute angle made by PQ with the line of centres at any instant, show that the angular velocity of PQ at this instant is
P2
oc
a1 a2 w1 w2, P2 P1 2 a1 -2 a2• n = t(w l + w .) + !(w l - w .) where P1P2• If P1, P2 represent two planets, it may be shown that w1 = fLlfa1�, w2 = fLlfa2�, where fL is a constant for the solar system. Deduce that, in this case, the motion of P2, as observed
2. Particles
P1
( 1 - ;Q cos )w.
and move around concentric circles of radii and in the same sense and with angular velocities and all respectively. Show that the angular velocity of about is given by r
r =
from Pv reverses its direction when the angle the planets is given by
6
between the radii to
v'ala2 a1 + a 2 - ya1a2 and prove that this equation always has a real root. cos 6 = ---�'---'-:== -'
I]
KINEMATICS
OF
A PARTICLE
I7
3. A point moves in the plane of axes Ox, Oy so that its x velocity com
ponent is always k times its y coordinate and its y velocity component is always k times its x coordinate. Show that its path is a rectangular hyperbola.
4.
A particle P moves in the plane of axes Ox, Oy such that its velocity makes a constant angle with OP. Show that the path is an equiangular spiral. If P's angular velocity about 0 is constant, show that its speed is proportional to OP.
5. An aircraft moves with constant speed V along a straight line.
0,
is its distance from a fixed point
prove that
� (rr) = V2.
If r
6. A and B are two fixed points on a circle and P is a moving point.
If (u, v) are the components of P's velocity resolved in the oblique directions AP, BP respectively, show that u sin2
7.
ex;
= r s
-
r,
In Example
3, assuming that, at
r = a, 6 = ex:,
and that
BP =
v sin2 ex; =
and LAPB =
n > I,
when t
8.
ex;,
s cos
where AP =
=
ex:.
s
- r cos ex;,
Deduce that ur + vs = 0. (M.T.)
t = 0, the missile is at the point prove that the missile strikes the target
a(n - cos ex:) . v(n2- 1)
Prove also that the missile's acceleration is always perpendicular to OP and of magnitude nv2 sin 6fr. A particle moves around the equiangular spiral r = ae O co�"' so that its angular velocity about the pole is constant. Show that the accelera tion of the particle makes an angle 2cx: with the radius vector and is of magnitude v2fr, where v is the speed of the particle. (L.U.)
9. A bead is constrained to move around a wire in the shape of a cardioid r = a(1 + cos 6) in such a way that its angular velocity about the pole is a constant c:u. Show that the bead's speed v, when it is at a distance r from the pole, is given by v = 2ar and that the magnitude of its acceleration is then c:u(a2c:u2 + 2v2)t.
c:uv'
10.
y = c cosh:': with constant speed v. c Show that its acceleration has magnitude cv2fy2• 1 1 . A particle moves in the plane of rectangular axes Ox, Oy. If (x, y) A particle moves along the curve
are its coordinates at time t, show that (%, y) are the coordinates of the corresponding point on the hodograph with respect to parallel axes. Deduce that if x and y are quadratic functions of t, the hodograph is a straight line.
I2. A particle P moves in a plane and has polar coordinates
(r, 6) . Its velocity always makes an angle with the radial coordinate r. Show that its track is a straight line or a circle. In the latter case, show that, if the particle's acceleration is always in the radial direction and = 0 when t = 0, then t is proportional to - sin cos
e
e
e
e
e.
A CO URSE I N APPLIED MATHEMAT ICS
18 13.
[CH.
A particle moves in the plane of axes Ox, Oy so that its acceleration always makes the same angle .p with the tangent to its path that the tangent makes with Ox. Show that the speed v is given by v = sin .p, where v = v. when .p = rt/2. Deduce further that, if the tangent to the path rotates at a constant angular velocity w, the
v.
intrinsic equation of the path iss
= � (1 w
the path is a cycloid.
14.
-
cos .p) .
Hence show that
By further resolving the Cartesian components of the velocity of a particle, show that the polar components are
v,
vo
=
=
x cos6+ :Y sin6 -x sin6 +
:Y cos6.
Substituting x = r cos6, y = r sin6, obtain equation ( 1 . 13 ) . Show similarly, that the polar components of acceleration are given by .f,.=xcos6+ysin6
fo = -xsin6+ y cos6
and hence obtain equation
15.
A straight rod AB of length c has angular velocity w radians per second clockwise about the end B, which is pinned to a horizontal table. At a certain instant the direction from B to A is northward. One second later the table is continuously translated eastward with constant acceleration f. Given that the eastward component of A's velocity is never zero, show that w cannot lie between rt/2 and 3rt/2. Assuming that w is less than rt/2 and that the eastward component of A's velocity is never zero, show that this component has alternate maxima and minima, provided/< cw2• Show also that the time interval between any maximum and the succeeding minimum is
and is less than
16.
( 1 . 1 8) .
rt w.
/
� cos-1 w
2 cw
(L.U.)
A ship leaves port and steers a straight course at 12 knots for a destina tion that is unknown. Six hours later a ship that can do 20 knots is sent from port in pursuit. It sails at top speed due northwards for 9 hours, and, on failing to find the first ship on this course, it proceeds to steer on such a curve that it would find it whatever the course taken by the first ship. Show that it describes the equiangular spiral r =
1 7.
(_1_)
1 80e!O.
(B.U.)
A particle moves in a plane so that the velocity components along and perpendicular to the radius vector from a fixed origin are c tan �6 and c respectively, where c is a constant. Show that the particle describes a parabola, and show that its acceleration is constant in magnitude and direction. (D.U.)
1] 18.
19
KINEMATICS O F A PARTICLE
A particle starts from the origin with velocity u i n the direction of the initial line and moves with constant angular velocity c:u about the origin and with constant radial component of acceleration uw inwards. Find its coordinates at time t from the start, and show that the equation of its path is wr = u(1 e-B) . (Li U.) -
.
CHAPTER 2
NEWTON'S LAWS.
RECTILINEAR MOTION
2.1. Newton's Laws of Motion
First Law of Motion may be rendered as follows : A body continues in its state of rest or of uniform motion in a straight line, unless acted upon by forces.
Newton's
We shall identify the " body " 'Yith the " particle " defined in the previous chapter. The motion of a particle can be assessed only against the background of a frame of reference and it is clear from the terms in which the law is formulated that this frame is supposed to be " at rest ". Newton assumed that it was possible to distinguish from among the infinity of possible frames of reference one which was in a state of absolute rest. Einstein's criticism of this assumption led him to develop the Special Theory of Relativity, and it is now uni versally admitted that the existence of such an absolute frame cannot be demonstrated. A more mature interpretation of the law must therefore be presented. If the centre of the Sun is adopted as the origin of a frame of re ference, the axes of which do not rotate against the background of the extra-galactic nebulce, then we may accept it as an observable fact that those stars of our galaxy which are widely separated from their neigh bours follow straight-line tracks at constant speeds over very long periods of time. Since the density of interstellar matter is small, it is a reasonable assumption that such stars are subjected to negligible external influences and their motion may be regarded as a verification of the First Law. If, however, we refer their motions to a frame which does not rotate relative to that based on the Sun, but whose origin moves with a velocity V relative to this body, it is clear from equation (1.5) that a particle which is in uniform motion relative to the first frame is also in uniform motion relative to the second. The First Law accordingly remains true in the second frame. Reasoning along these lines, we are led to expect that, in a hypothetical region of the universe populated by particles which do not interact, it would be possible to set up any number of frames of reference in each of which all the particles would follow straight-line trajectories at constant speeds. We shall interpret the First Law as asserting the existence of such frames of reference and shall term such a frame an inertial frame. Throughout the remainder of this book all motion will be supposed referred to such a frame unless otherwise stated. 20
[cH. 2]
NE WTON ' S LA W S .
RECT ILINEAR MOT ION
21
If mechanical phenomena within the Solar System are to be dis cussed, the inertial frame based on the Sun and described above may be employed. A frame which is fixed in the Earth is more con venient when the motions of bodies near the Earth's surface are to be treated. Such a frame is clearly not inertial. However, the rate of rotation of this frame due to the diurnal motion of the Earth and the acceleration of its origin on account of this motion, and of the motion of the Earth in its orbit, are so small that they can usually be neglected . For most practical purposes (except for long-range ballistic calculations) little error results from treating such a frame as inertial. Referred to an inertial frame, a particle which is not disturbed by external agencies will follow a straight-line path at a constant speed. If, therefore, relative to an inertial frame a particle is observed to follow a curved path, or if its speed is observed to vary, we conclude that the particle is being disturbed by the action of some extraneous agency. The disturbance of the particle's motion is said to be due to the forces which have been brought to operate on the particle by this agency. Thus, the speed of a falling particle steadily increases, and this phenomenon is regarded as being accounted for by the force of gravity acting upon the particle, the agency responsible for this force being the Earth. Again, a bead, spinning around a smooth circular wire fixed in a horizontal plane, is regarded as deviating from a straight path under the action of a force exerted by the wire upon it. Since inertial frames are not accelerated relative to one another, it follows from equation (1.17) that a particle whose motion is being disturbed by a force will have the same acceleration with respect to all inertial frames. A particle's acceleration vector is accordingly a satisfactory measure of the force being exerted upon it and we shall render Newton's Second Law in the form :
The force acting upon a particle in non-uniform motion relative to an inertial frame is defined to be a vector in the direction of the acceleration and proportional to it in magnitude. The constant of proportionality will depend upon the particle and will be called its mass. The second law has accordingly been reduced to the status of a definition of force. The " mass " of a particle occurs in our statement of the second law, but this scalar quantity is not known precisely until a technique for its measurement has been prescribed. This is the function of Newton's
Third Law: When two particles P and Q interact, the force exerted by P upon Q is equal in magnitude to the force exerted by Q upon P, but is in the opposite sense. The directions of both forces are in the line PQ.
22
A COURSE IN APPLIED MA THEMA TICS
[cH.
By observing the directions of the accelerations of P and Q, the final statement can be checked experimentally. However, the first part of the law cannot be subjected to a complete experimental verification, for we have not yet described how the masses of P and Q are to be measured and hence cannot find the magnitudes of the forces exerted upon them. In fact, this part of the law is partly a statement of how such measurements of mass are to be made. This can be made clear thus : If v is the velocity of a particle of mass m relative to an inertial frame, p = mv is termed the momentum of the particle. Applying the third law to two colliding particles, it follows that the sum of their momenta immediately after the collision is equal to the same sum before the collision. This is the Law of Conservation of Momentum (see Section 5.3) . Suppose then that two particles of masses m1 , m2 having velocities Uv u2 respectively come into collision and separate with velocities Vv v2 • Then or
mlul + m2u2 = mlvl + m2v2, m2 ml (v2 - u2) = ul - vi .
This result implies that the vectors u1 - Vv v2 - u2 are parallel, a prediction which has been checked experimentally. It is clear that if parallelism exists relative to one inertial frame, it will exist relative to all. However, such an experiment will clearly also provide us with a value for the ratio m2jm1 • Hence, if a certain particle is now adopted as the standard unit of mass (e.g. the pound (lb) or gramme (gm)) , the masses of all other particles can b e measured in terms o f this unit by permitting them to collide with the standard and measuring the appropriate velocities. Let F be the force acting upon a particle of mass m and let f be its acceleration. Then F = mf. (2. 1) If m is measured in lbs, f in ftjsec2, the units of F are called poundals (lbals). If m is in gm, f in cmjsec2, F is in dynes. If m is in kilo grammes (kg), f in mjsec2 , F is in newtons. Engineers employ the pound weight (lb wt) as a unit of force. This is the force of gravitational attraction acting upon a pound mass situated at the surface of the earth. With this unit of force, if f is in ftjsec2 , m is said to be measured in slugs. All particles in the vicinity of the earth's surface are observed to fall in vacuo with an acceleration of 32·2 ftjsec2 • It follows that the gravitational force exerted upon a pound mass is F lbals, where
F = l X 32·2 = 32·2.
2]
N E WTON'S LA WS .
But this force is, by definition, one pound weight. 32 ·2 lbals.
1 lb wt
Again, if m slugs is the mass of this particle, since it causes an acceleration of 32·2 ftjsec2, i.e.,
Hence (2.2)
1 lb wt acting upon
1 = m x 32·2 m = 1/32·2.
Hence, 1 lb or
23
RECT ILIN EAR MOT ION
1 slug
=
=
1 slugs 32 .2 32 ·2 lb.
(2.3)
Throughout the subsequent work, we shall always suppose that forces, masses and accelerations are expressed in terms of any set of consistent units. It will rarely be necessary to specify the par ticular set we are employing, since equation (2.1) is true for any such consistent set. Experiment reveals that, provided air resistance is eliminated or can be neglected, all particles near the earth's surface fall with the same acceleration 32·2 ftjsec2 or 981 cmjsec2 • If g denotes this acceleration in any convenient units, m denotes the mass of the falling particle in corresponding consistent units of mass, the force F of the Earth's attraction on the particle is given by
F = mg, .
(2. 4)
F being measured in units of force appropriate to those employed for mass and acceleration. Equation (2.4) reveals that the Earth's attraction on a particle at its surface is proportional to that particle's mass. This result is included in a further law due to Newton, which we shall state in Chapter 4 (p. 102) . If a number of forces act upon a particle the acceleration produced is found to be the vector sum of the accelerations each would cause if acting separately. This fact is an additional law of motion, whose validity can be checked only by experiment. It is termed the Principle of the Independence of Forces. If, therefore, forces Fv F2, Fn cause accelerations f1, f2, fn respectively in a particle of mass m, when acting individually, when acting in concert they will cause an + fn. .But acceleration f1 + f2 + Letting
+ fn) = mf1 + mf2 + = F1 + F2 +
(2.5) (2.6)
24
A COURSE
IN A PPL IED MATHEMATICS
[cH.
we see from equation (2.5) that a force F will also cause an acceleration in the particle of f1 + f2 + + fn. The forces Fv F2, F, acting together therefore have the same dynamical effect as the single force F. F is called the resultant of the n forces, and equation (2.6) shows that it is calculated by vector addition of these forces. It follows from equation (2.6) that \ \ the resolute of the resultant force F F ' \ in any direction is the sum of the \ F" taken in resolutes of Fv F2, ''----F;------./ the same direction. Fn are If the forces Fv F 2, FrG. 2.1.-Polygon of Forces represented by displacement vectors in the manner indicated in Fig. 2.1 the displacement vector representing their resultant F forms the closing side of a polygon. This diagram is accordingly called the Polygon of Forces. I
2.2. Work and Power
Suppose that a particle moves along a straight line from P to P' under the action of certain forces of which F is one (Fig. 2.2) . Suppose that F remains constant in magnitude and direction during the motion , F
L,, '�,,
p
p
(b)
(a)
FIG. 2.2.-Work Performed by Force
e being the angle made by the direction of the force with that of the displacement PP'. e is taken to be acute in case (a) and obtuse in case (b). The work done by this force during the displacement is defined to be the quantity F . P P' cos e, and is therefore negative if e is obtuse and zero if e is a right angle. F cos e is the resolute of F in the direction of the displacement PP', and hence the work done is equal to the resolute of the force in the direction of the displacement multiplied by the displacement. Alternatively, P P' cos e is the �
�
resolute of the displacement in the direction of the force, and the work �
done is this resolute of P P' multiplied by the force. If F is measured in dynes and P P' in em the units of work are called ergs. If F is in
2]
NE W TON 'S LA WS .
25
RE CTILINEAR MOTION
newtons and PP' in metres, work is in joules (= 10 7 ergs) . If F is measured in lbals and P P' in ft, the units are ft lbals. If F is in lb wt and PP' in ft, the units are ft lb (1 ft lb = 32·2 ft lbals). Employing the notation of vector algebra, if d represents the dis-+ placement PP', the work done by F can be written as the scalar product F d If F is the resultant of a number of forces F1 , F2, . . Fn acting on the particle, the work done by F is F d = (F1 + F2 + Fn) · d = F1 d + F2 d + + Fn d, having made use of equation (2.6). We have shown, therefore, that the sum of the works done by a number of forces is equal to the work done by their resultant. Now consider the general case when a particle moves along any curve from A to B under the action of forces of which F is one (Fig. 2.3) . ·
.
·
·
·
·
F B s
A
FIG. 2.3.-Work Done by a Variable Force
F will be supposed to vary both in magnitude and direction. Let P be any point on the curve and let the arc AP be denoted by s. Let the arc P P' be as. Let e be the angle between the direction of F when -+ -+ acting at P and the tangent PT to the curve at P. PT is taken in the same sense as the motion. As the particle moves from P to P', provided as is sufficiently small, we may assume that F does not vary appreciably in magnitude or direction. The work done by the force over the arc PP' is accordingly F cos eas, very nearly. The work done by F, as the particle moves from A to B, is
W = lim _2 F cos eas,
the summation being extended over all elements as into which the curve AB can be subdivided and the limit being approached by allow ing the number of these elements to tend to infinity, each tending to zero in its length. The limit of such a sum is written. w
=
1BF cos eds
and is calculated as a line integral.
(2.7)
26
A COURS E IN A P PL I ED MATHEMAT I C S
[CH.
If F is the resultant of a number of forces, since it remains constant in magnitude and direction over PP', provided this arc is small, the work it does over this element is the sum of the works done by the individual forces. Summing over all the elements as, we conclude that this statement is also valid for the whole arc AB. If P has position vector r and P' has position vector r + ar, the dis placement PP' along the curve A B is denoted by ar and the line integral (2. 7) may be written in vector notation thus :
W = LsF · dr.
Suppose that the curve AB and the force F lie in the plane of rect angular axes Ox, Oy and let (X, Y) be the components of F parallel to the axes. If P is the point (x, y) and P' is the point (x + ax, y + ay), ar has components (ax, ay). Hence F · ar = Xax + Yay and
W = LB (Xdx + Ydy) .
(2.8)
A particle can move in the plane of rectangular axes Ox, Oy. When its coordinates are (x, y), the components of a certain force applied to it are (ky2, kx2) . Calculate the work done by this force if the particle is constrained to move along the parabola y x 2 from the origin to the point (1, 1 ) . I n this case ky2, Y = kx2 • Since y = x2 at each point o f the path, k%4 and Y = ky. The work done is now given by equation {2.8) to be
Example 1.
X=
=
X=
W
=
1(1, 1) (0, 0)
(kx4dx + kydy) =
= tk + !k = 0·7k.
11 0
kx4dx +
i\
ydy
0
The power which is being developed by a force acting upon a particle at any instant is defined to be the rate at which the force is doing work at this instant. Consider again the particle which moves along the curve A B (Fig. 2.3). Let at be the time taken to move from P to P' The work done by F in this time at is F cos eas. Hence, the average rate of doing work over this time interval is
as F cos 6 -· at Letting
at -- 0, this expression approaches the value H = Fv cos e = F v, .
(2.9)
where v is the velocity of the particle at the instant under considera tion. H is the rate of doing work by F when the particle is at P and hence is the power developed by F at this moment. H is seen to be the resolute of F in the direction of motion multiplied
2]
N E W TON 'S LA W S .
RE CTILINEAR MOTION
27
by the speed or, alternatively, the resolute of the velocity in the direc tion of F multiplied by F. In the c.g.s. system of consistent units, equation (2.9) will give H in units of ergs/sec. In the f.p.s. consistent system, H will be given in ft lbalsjsec. In the m.k.s. system, there is also the practical unit of power termed the watt defined thus
1 watt 1 joulejsec
_
107 ergsjsec.
(2 . 10)
In the f.p.s. system, there are two practical units of power. They are defined as follows : (i) (ii)
1 ft lbjsec - 32·2 ft lbalsjsec, 1 horse power (H.P.) 550 ft lbjsec.
(2.11)
_
2.3. Rectilinear Motion of a Particle
Suppose a particle of mass m is in motion along a straight line. Its acceleration vector will be directed along the line and hence, by equation (2.1), so also will the vector representing the force acting upon it. Let 0 be a fixed point on the line and let P be the position of the particle at time t (Fig. 2.4). Let 0 P = x, x being reckoned positive 0
m
------- (}'
p
F
FIG. 2.4.-Motion Along the x-Axis
when P is on one side of 0 and negative when P lies on the other side . If v is the speed of P, v = dxjdt = i and v is positive if x is increasing. Let F be the magnitude of the force acting on P, F being given a positive sign if it acts in the direction in which x increases. We shall show how the motion of P may be determined in the three cases when F is given as a function of (i) t, (ii) x and (iii) v.
(1) F is a Function of t
The acceleration of P is dvjdt.
Hence, by equation
(2.1),
(2.12) F = m dv dt' m being a constant, this implies that dvjdt is a known function of t. Thus, dv = F = fl (t). (2.13) at :m Integrating with respect to t, we obtain (2.14) v = ffl (t)dt = f2 (t), .
28
[CH.
A COURSE IN APPL IE D MATHEMAT ICS
assuming that the integration can be carried out. v will usually be known at the commencement of the motion, i.e., at t = 0. The arbitrary constant of integration must be selected to ensure that equation (2.14) yields the value of v appropriate to this instant. Since v = dxfdt, by integrating equation (2.14) with respect to t, we find that
(2.15)
We shall normally find it convenient to choose 0 to be the position of the particle at time t = 0. If such is the case, x 0 when t 0 and the integration constant must be selected so that equation (2.15} is satisfied by these values. As a particular case, F may be constant. The acceleration is then also constant and equal to f, say. Thus, =
=
dv = f. dt Integrating with respect to t, we obtain
(2.16)
v = u + jt, where v
= u at t = 0.
A second integration yields
(2.17) x = ut + tft2 , having assumed that x = 0 at t 0. Eliminating t between equations (2.16), (2.17), we obtain the third well-known equation for constantly =
accelerated motion, viz.,
v2 = u2 + 2jx.
(2.18)
An electric train of mass M tons starts moving along a straight, level track from rest. The tractive force of the motors decreases uniformly with the time, over a period of T min, from P lb wt to R lb wt. The total resistance to motion is R lb wt. Show that the distance travelled in miles during the T min is
Example 2.
(P - R)P. 308M
(Take g = 32.)
The tractive force F lb wt diminishes at a rate (P - R) fT lb wtfmin. t sec after the commencement of motion, the tractive force is therefore given by F=
p
_
(P - R)t. 60T
The resultant force acting on the train at this instant is accordingly p
_
(
) � ) lbals. 6 T
t (P - R)t R = (P - R) l - __ lb wt 60 T 60T = 32(P
(
- R) I
-
2]
N E WTON 'S LA WS.
RECTILINEAR MOTION
The mass of the train is 2240M lb. Hence, if at time t sec,
29
v is the velocity in ftjsec
dv ( - t) 60T 1 dv = P - R ( 1 t ).
2240M dt = 32(P - R)
or Integrating, we obtain
dt
70M
-
60T
t2 )
(
P-R t 70M 120T ' 0 when t the constant of integration being zero, since A second integration yields
v
=
v=
=
0.
the integration constant again being zero if we agree to measure x from the starting position. When t = 60T sec, 120(P - R) T2 X = ' 7M and the appropriate units of x are feet. Converting to miles, we obtain the result stated in the question.
(2) F is a Function of x
In this case, the force acting upon the particle depends on the latter's position on the line of motion. We transform the acceleration thus,
dv - dv dx v dv - !_ ( 1v 2) dt dx dt - dx dx 2 • The acceleration will be a given function of x, i.e., d dx (!v2) gt(x). Integrating with respect to x, we obtain !v2 jg1 (x)dx = g2 (x) . Solving for v, we find that . 1v = dx dt = v 2g2 , _
_
_
=
=
and hence,
l dt -2 = g3 (x). dx = ·v. ;2g
(2.19) (2.20) (2.21) (2.22)
Integration of this last equation with respect to x, yields finally
t = j g3 (x)dx = g4(x).
(2.23)
30
A CO URSE
IN APPL IED MATHEMAT ICS
[cH.
It will generally be convenient to solve for x in terms of t in this equation, if this is possible. In any case, equation (2.23) specifies the motion. Thus, suppose that the particle is attracted towards a fixed point on the line of motion, with a force whose magnitude is proportional to the particle 's distance from the point. Taking the fixed point as the origin of x, the force, and hence the acceleration also, will be proportional to x. Thus,
(2.24) where cu2 is the constant of proportionality. Integrating equation (2.24), we obtain
fv2 = - !cu2x2 + constant
(2.25) It is clear from equation (2.25) that x can never exceed A!/ cu in magnitude, for otherwise v2 would be negative and v imaginary. Putting a = Aljw, this implies that the particle's motion is confined to that part of the x-axis lying between the points x = ±a. In terms of a, equation (2.25) reads as follows (2.26) Solving for v, v = cuva2 - x2 dt 1 or (2.27) dx - cuva2 - x2· Integrating with respect to x, we obtain t = cu1 sm. - aX + constant, or x = a sin (cut + �), (2.28) where � is an integration constant. The main characteristics of the motion are easily discerned by con sideration of equation (2.28). As t increases over an interval of length 2rt/cu, wt + � increases by 2rt and the sine function increases and de creases once through all values between ± L x therefore oscillates in value between ±a, one complete oscillation being performed in time 2rt/cu. The graph of x against t is shown in Fig. 2.5. The motion is called Simple Harmonic Motion (SHM) and the time of one complete oscillation is the period. Denoting the period by T, we have T = 2rtcu . (2.29) or
-
1
-
2]
NE WTON 'S LAWS .
RE CTIL INEAR MOT ION
31
The number of complete oscillations taking place in unit time is called the frequency f. Thus (>)
1 ! = T = 2"·
(2.30)
The extreme distance from the point 0 achieved by the particle, viz., a, is termed the amplitude of the motion. (wt + cf>) is called the phase
FIG.
2.5.-Graph of Simple Harmonic Motion
of the motion at the instant t and, hence, cf> is known as the initial phase of the motion. cf> can always be made zero by choosing t = 0 to be an instant when x = 0 and is increasing. If we choose t = 0 to be an instant when x = 0 and is decreasing, then cf> = " and x = -a sin wt. Very often, t = 0 is selected to be an instant when x = a ; then cf> = !" and x = a cos wt. If cf> takes none of these values, we may expand equation (2.28) thus, x
= a sin wt cos cf> + a cos wt sin cf> (2.31) = A sin wt + B cos wt, where A = a cos cf>, B = a sin cf> and are therefore also of the nature of constants of integration. Equation (2.31) represents an alternative general solution of the equation of motion (2.24). Equation (2.28) indicates that SHM may be regarded as the pro jection on a straight line of a uniform circular motion. Thus, consider a point Q which moves around a circle of radius a and centre 0 with
32
A COURSE
IN A P PLIED MATHEMAT I C S
[CH.
uniform angular velocity w in a clockwise direction (Fig. 2.6). Let A A ', BB' be perpendicular diameters of the circle and let QP be
FrG.
B'
2.6.-Geometrical Generation o f SHM
perpendicular to BB'. If 5 is the position of the point Q at time t = 0, LQOS = wt. Let LSOA = if>. Then x
= OP = OQ sin LPQO = a sin (wt + ¢>). (2.32) It follows that the point P executes SHM on the line BB'. The velocity of Q is of magnitude aw and is in the direction of the tangent at Q. This tangent makes an angle (wt + if>) with BB'. The resolute of Q's velocity in the direction of BB' is accordingly aw cos (wt + ¢>). Only this resolute of Q's velocity is communicated to P and, hence, P's velocity is
(2.33) a result which is also obtainable by differentiation of equation (2.28) with respect to t. It appears from this last equation that the maximum value of v is (2.34) = aw. v
v
= aw cos (wt + if>), Vmax.
takes this value when the phase is zero, i.e., when P passes through
0 in the positive direction.
The circular generation of SHM will be found very useful when problems concerning the passage of time between two phases of a SHM are to be solved (e.g., see Example 3 below) . Practically, the simplest way of causing a body to execute SHM is by connecting it to a fixed point by an elastic support. Thus, suppose that a particle P of mass m hangs freely from a fixed point A by an
2]
NE WTON ' S LA W S .
RECT IL INEAR MOTION
33
elastic string of natural length l (Fig. 2.7). We shall assume that the string obeys Hooke's Law, viz., the extension of an elastic string is ,
- - - - - - -
r
- - - - - -
A
l p- - - - - - - -- - - -- - -r 0 m9
.X
mg
t
T p
mg
FIG. 2.7.-Vertical Oscillations on an Elastic String
Then, if e is the extension beyond the natural length and T is the tension produced,
proportional to its tension.
T
= [1-e,
(2.35)
where lL is Hooke 's constant. lL is a constant for a particular piece of string, but is not independent of the length of the string. We often write
[L = ).,r
(2.36)
where :t.. is the modulus of elasticity of the string. :t.. depends only upon the material and cross-sectional area of the string. When the particle hangs in equilibrium (Fig. 2.7 (a)), the tension in the string must balance the weight force mg acting on the particle, i.e., T = mg. If c is the extension, therefore, by equation (2.35)
mg = [LC.
(2.37)
If the particle is now displaced vertically from its equilibrium position and released, it will oscillate in a vertical line. Let 0 re present the equilibrium position of the particle on this line and x the distance of P vertically below 0 at time t (Fig. 2.7 (b) ) . At this instant the total extension of the string is x + c, and the tension T is accordingly given by c
(r)
T
= tL (x + c) = [LX + [LC = [LX + mg,
(2.38)
34
A CO URSE
IN APPL IED MATHEMAT ICS
[CH.
use having been made of equation (2.37). The resultant downward force acting on the particle is therefore
mg
-
(2.39)
T = - fl.X
and the equation of motion is
mx = -fl.X
(2.40)
i.e.,
where w2 = fLfm. Equation (2.40) implies that the particle's motion is simple harmonic of period 2rr:/w = 2rr:vmffL . Clearly, equation (2.40) is valid only so long as the string remains taut. Should it go slack during the motion, the particle will then be in a state of free fall under gravity, i.e., will have a constant accelera tion g downwards. This phase of the motion must be dealt with separately from the SHM phase. A particle of mass m is attached to a fixed point A by an elastic string ofnatural length l and modulus t mg. The particle is held at A and then released. Prove that it returns to the point A after a time + �) �i (1 and that its greatest depth below A is (3 + 2y2)l. The particle first falls from A with a constant acceleration g to a point B, where AB = l. The string then becomes taut and the particle's motion is
Example 3.
simple harmonic until it returns to B, when the string goes slack again. On the two occasions that the particle is at B, its distances from the centre of oscillation 0 are the same. It follows from equation that the particle's speeds at these instants are also identical, though the senses of its velocities are opposite. The particle's upward motion is therefore identical with its downward motion, apart from direction, and it arrives back at A with zero velocity. If is the time of free fall from A to B and V is the speed at B, equations and show that
(2.26)
t1 (2.16)
(2.17)
= gtl> l = tgtl·· tl = �· v = v2lg. Hooke's constant for the string is 1-' = mgf2l and hence, during the SHM, w2 = JLfm = gf2l. The centre of oscillation 0 is at a depth c below B, where c is given by equation (2.37). Thus c = mg = 21. /-' Measuring x downwards from 0, x = -2l and v = - V = - v 2lg at B. Substitution in equation (2.26) yields, 2lg = .!I_21 (a• 412) :. a = 2vf2l. Hence
v
-
2]
N E W TON' S LA W S .
RECTIL INEAR MOTION
The maximum depth below achieved is therefore sponding depth below is + O + = + + 2 -yl2 = + The SHM may be regarded as the projection of a uniform circular motion of a point Q having angular velocity w = V around a circle of radius This is shown in the diagram, C being the point of maximum depth. When the particle is at SHM com mences and continues until the point Q generating the motion arrives at Q', when the particle has returned to Now OB = OQ = and hence BOQ = -f7T. The reflex angle QOQ' through which OQ moves is ac cordingly The time taken by OQ to sweep out this angle is
AB B
2-yl2l.
0 a l 2l
A
2-yl2l. l (3 2-yl2)l.
35
The corre
gf2l
B,
2l,
2-yl2l
B.
377/2.
. "'F2li -� �2 "'/�g '
�': __,_ 2 and this is the time of the SHM. The total time required is
t
2
=
c
2tl + t. = 2,J!j + i�� = �¥ ( 1 + �)Example 4. A particle of mass m moves in a straight line between two centres of force A, B, distant 2a apart, whose attractions on the particle when it is at the point P are mp.PA-2, mp.PB-2 respectively . Find the velocity with which it must be projected from the point C, where A C = 9GB, in order that it may just come to rest at the middle point 0 of AB. Prove that the time taken by the particle to travel from C to D, where 50D = 30B, is " ' (Iog ,a - ' ) ( ap_ )t (L.U.) Let x be the distance of P from 0 at any instant. The resultant force acting upon the particle in the direction of OP is then mp. mp. 4mp.ax (a - x)2 - (a + x)2 = (a2 - x2)0 The equation of motion of the particle is therefore m iiXd (tv ) = (a•4mp.ax - x•)2 An integration with respect to x yields 1•v2 - 4p.aJ xdx (a• - x•)• J 2p.a (a• - u)-•du, where u = x• = 2p.a(a2 - ut1 + constant, and, hence, v• = a 4p.a - x + constant. 2
•
2
_
=
2--2
•
36
A C O U RS E I N A P P L I E D MAT H EM A T I C S
[CH.
We require that when x = 0, then v = 0. The integration constant must therefore be chosen to be - 41-'fa, and then, �aa• - x•
v• =
_�= a
When P is at C, AP = 9PB, i.e.,
4/Lx• a(a• - x2) •
(i)
x + a = 9(a - x)
x = ta.
For this value of x, equation (i) shows that v2 =
641-' 9a
the negative sign being taken, since the velocity of projection from C is clearly towards 0. Putting v = dxfdt, equation (i) may be written � dx
=
-
(1-'�)
t (a• - x•Jl
2x
.
When P is at D, where 50D = 30B, x = 3aj5. (ii) over the motion from C to D, we obtain
(ii) Integrating equation
tD - tc = -! (JL-a)tl� a (a• -x x•)i dx a a) ll�a w• = !( dw, where w = + (a2 - x•)i -2a -w2 Ra ( a )il�a ( a• - 1 ) dw = ! w• p. a• la ! a + w - wlta = ! ( � ) �� log l
J.£
_
p.
2
= !(log t
(3) F is a Function of v
a -w
- tl(�t
�a
The mass being constant, the acceleration of the particle is a function of v, so that we may write
dv dt = hl (v)
or
(2.41)
dt = 1 h1 (v) · Integrating with respect to v, dV
{2.42)
2]
N E WT O N ' S LA W S .
RECTI L I N E A R M O T I O N
37
Assuming that we are now able to solve for v in terms of t, equation (2.42) may be put in the form
v = h3 (t), dx = ha(t). or (2.43) dt A final integration with respect to t now yields x as a function of t. Alternatively, equation (2.41) is equivalent to
v dv dx = h1 (v), dx = v or dv h1 (v)" Integrating with respect to v, we find that x = Jhv dv = r (v) h2 (v).
(2.44)
(2.45)
Solving for v in terms of x, we have
v = dx dt = h3 (x) dt l dx = h3 (x) ' An integration with respect to x now yields t as a function of x and the problem is solved.
(2.46) T
�
The methods of this section are particularly applicable to problems concerning the motion of a tr body in a vertical line under the action of gravity and air resistance. For small speeds v (up to m'J 20-30 ftjsec) it is found that the force of air re sistance is proportional to v. For larger speeds mkv (up to 800-900 ftjsec) this force is found to vary as v2 • As the velocity of sound is approached, the resistance increases very rapidly indeed, and its :X. variation cannot be represented satisfactorily by any power of v. At supersonic speeds the resist ance again increases approximately like a linear function of the speed. We shall discuss the cases when the resistance is proportional to v and to v2• Suppose that a particle of mass m is projected vertically upwards with a speed V from a point 0. 2.8.-Resisted When the speed is v, let mkv be the air resistance FrG. Motion in a Verti and let x be the body's height above 0. The cal Line
tp
fa
- - - - -
_ _ _
_
- - -
_ _
__[
38
A C O U R S E I N A P P L I E D M A T H E MA T I C S
[CH.
forces acting on the particle P are shown in Fig. 2.8. The equation of motion is
dv = -mg - mkv. mv dx
(2.47)
This equation is also valid for motion in the downwards direction, for then v will be negative and its sign serves to reverse the sense of the resistance mkv so that it acts upwards and continues to oppose the motion. From equation (2.47), l gjk v dx = dv g + kv = -k + g + kv' -
and, integrating, we obtain
x = ]i + � log (g + kv) + constant. (2.48) When x = 0, v = V and hence, g v constant = k fi2 log (g + k V). Equation (2.48) may now be written (gg ++ kVkv )· K log (2.49) x = !k (V - v) - k2 When v = 0, the particle has achieved its maximum height and is at the vertex of the motion T. If h is the height of the vertex above 0, equation (2.49) shows that V g log (l + kV ) h= k g . (2.50) Ji2 When the particle returns to 0, let U be its speed. Then, when x = 0, v = - U and, since equation (2.49) is valid for the downward trajectory, 0 = kl (V + U) - Ji2g log gg + kV kU g + kV. U + V = �k log g - kU (2.51) or This latter equation determines U. Alternatively, we may write equation (2.47) thus m dv dt = mg - mkv l dt dv = -g + kv' -
-
-
_
-
N E WT O N ' S LAWS .
2]
R E CT I L I N E A R M O T I O N
39
Integrating,
t = -k1 log (g + kv) + constant. When t = 0, v = V and hence, 1 constant = k log (g + k V) t = k! log gg ++ kV kv . At the vertex, v
= 0.
i log (1 + � v}
(2.52)
{2.53)
It follows that the time from 0 to T is
(2.54)
Solving for v in terms of t from equation
As
t -+ CXJ ,
e-kt -+
0,
(2.53), we obtain v = �� = (f + V) e-kt - f· {2.55) and hence
v -+ - f·
This implies that, after
some time has elapsed, the particle will be falling downwards with a speed gjk. This quantity is called the terminal velocity of the body. When v = -gjk, the resultant force ( - mg - mkv) acting upon the particle is zero, i.e., air resistance balances gravity and the particle's velocity is accordingly uniform. Integrating equation (2.55) with respect to t, and remembering that x = 0 when t = 0, we find that x
= Hf + V) (1 - e-kt) - f t.
(2.56)
mv ddvx = -mg - mkv2 •
(2.57)
This equation completely determines the motion. If now we take the resistance to be mkv2, the equation of motion corresponding to equation (2.47) is
This equation is obtained under the assumption that the motion is in the upwards direction. If the motion is in the opposite direction, v has a negative sign, but the sign of mkv2 remains positive. This implies that the sense of the resistance force is not automatically reversed when the sense of the motion changes. The equation of downwards motion must therefore be written d mv dxv = -mg + mkv2 •
(2.58)
A C O U R S E I N A P PLI E D MATH EMAT I C S
40
Arranging equation
(2.57) in the form dx - v dv g + kv2
[cH.
(2.59)
v, we obtain (2. 60) x = 2lk log (g + kv2) + constant. Since v = V, when x = 0, the constant is easily determined and then we find that x = 2lk log gg ++ kkV2 (2.61) v2 When v = 0, x = h and the particle is at the vertex. Thus the height of the vertex is given by h = ;k log (l + � V2} (2.62) and integrating with respect to -
Integrating equation downward motion
(2.58) in the same manner, we obtain for the
x = 2lk log (g
kv2) + constant. (2.63) When x = h, we know that v = 0. The integration constant is accordingly h ;k log g = ;k log H (l + � V2)} · -
-
(2.63) now yields (2.64) x = ;k log {(l � v2)(l + � V2)} When x = 0, the particle has returned to the point of projection . If U is the speed of return, equation (2.64) shows that 0 = 2� log {( l � U2)(l + � V2)} , Equation
-
-
or or
(1 � u2)(1 + i V2) = 1, U2 = V2� 2. l +gV _
To calculate the time of the motion, we rewrite equation the form
m dv dt = -mg - mkv2.
(2.65) (2.57) in (2.66)
N E WT O N ' S LA W S .
2]
R E CT I LI N E A R M O T I O N
I
Hence dt
dv
41
(2.67)
and an integration shows that t
=
)kg [tan-1 J� V - tan-1J� J,
(2.68)
- Ikg tan-1 J-gk V
(2.69)
v
the integration constant being chosen so that t = 0 when v = V Putting v = 0 in equation (2.68), we find that the time t0 to the vertex is given by t0 - .
1_
v
For the downward motion, we manipulate equation (2.58} in a similar fashion, obtaining instead of equation (2.68}, the equation
-
t - t0
+
I Ji 2 k log Ji vg
- v
�+
k
'
(2.70)
v
the integration constant being chosen so that t = t0 when v = 0 (i.e., at the vertex) . When v = - U, the particle has returned to 0. Let t = t1 at this instant. Then, from equation (2.70), t1 =
t0
U + I Ji . log Ji + 2 v kg 1_
�
_
k U
+ V2 + V J I k i V + log �===--Jg 2vkg f + V2 v Vkg J = � [tan-1 Jt V + log { I + V2 + J � J� v}} vg =
I
�
tan-1
�
_
(2.71}
equations (2.65) and (2.69) having been employed in the manipulation. Equation (2. 71) gives the time which elapses before the particle returns to the point of projection. The reader should show that in this case, the terminal velocity is
vgfk.
42
A C O U R S E I N A P P L I E D MATHEMAT I C S
(CH.
The engine of a motor car produces a power P when the car is running on the level at velocity v, where p = A (nvfu)� , (nvfu)s where A and u are constants, and n is the gear ratio which is being used. A s suming that the driver changes gear as soon as a higher power is obtainable from the next gear, and neglecting resistances, find the time to reach top gear from rest, if n = and respectively for bottom, second and top gear h.p., u = m.p.h., and the mass of the car is I ton. (B.D.) and if A = If n, n' represent two consecutive gear ratios, the velocity v at which a
Example 5.
I+
30
2·5, I·6
30
I,
change from one to the other should be carried out satisfies the equation A
Whence we find that
I + (nvfu) 3 = A I + (n'vfu) 3 (nvfu)�
(n'vfu)�
•
u ' v' (nn')
v=
When n = n' = I·6, since u = m.p.h., then v = m.p.h. When and n' = I, the appropriate velocity for the gear change is found to be m.p.h. Assuming that A, v, u are measured in absolute units of the f.p.s. system, the tractive force due to the engine is Pfv lbals. The equation of motion of the car during any phase of its motion when no change of gear is made is accordingly
I·6 I5y'I0/2
n=
where
2·5,
30
M dvdt
M is the car's mass in lb.
=
A
I5
(nfu) �vi
I + (nvfu) 3'
Separating the variables we obtain
� dt = [(E)
-4 v-i
+ (S) � v�] av.
Integrating over the phase being considered, we show that �
2M
( ) " J t J t't, = ( nvu ) t + ('!!!!) � I .l,.
?! u
7
u
� v,, v,
where JtJ :' = t1 - t0, etc., and t0, t1 are the times at the beginning and end of the phase respectively. In absolute units, A = X X ft lbal sec-1, u = ft sec-1, = lb. Thus 0
30 550 32 44 1232 t + ( '!!!!) ��v'. t = t1 75n2 J (�) u u Taking n = 2·5, v0 = 0, v 1 = 15 m.p.h., we find for the time spent in bottom gear 3·76 sec. With n = 1·6, v0 = 15 m.p.h., v1 15'\1'10/2 m.p.h., we calculate that the time spent in second gear is 3·15 sec. The total time required to reach top gear is accordingly 6·91 sec.
M 2240
_
],_
0
7
v,
=
2.4. Damped and Forced Oscillations
We have proved in Section 2.3(2) that a particle of mass m, which moves along the x-axis under the action of a force m(i}2x directed towards the origin, executes SHM of period 27tf(J). We will now investigate the effect of introducing, in addition, a resistive force
N E WT O N ' S LAWS .
2]
R E C T I L I N E AR M O T I O N
43
proportional to the particle's speed. A frictional force which varies as the speed of the body to which it is applied is said to be viscous. x being the speed of the particle at any instant, we shall take the �--- x 0
------�
mk:i:
mw'x
m
P
FrG. 2.9.-Forces for Damped Oscillatory Motion
frictional force to be mkx. The forces acting on The equation of motion is
2.9.
m are shown in Fig.
mi - mkx - mCil 2x, {D2 + kD + Cil2)x 0, =
or (2.72) where D dfdt. Equation (2.72) is a linear differential equation with constant co efficients, and we shall solve it by the standard procedure which is available for such equations. The characteristic equation is =
=
)_2 + k'A + Cil2 = 0
(2.73) and there are three cases to be considered, viz., (i) k > 2Cil, (ii) k 2Cil and (iii) k < 2Cil. If k > 2Cil, i.e., the frictional force is comparatively large, the roots of the quadratic equation (2.73) are both real and distinct. These characteristic roots are also both negative, for a positive value of 'A makes the left-hand side of equation (2.73) greater than zero. Let the roots be -'A1 and - 'A2 ('A1 > 'A2). The general solution of equation (2.72) may then be written x = Ae-A,t + Be-A•1• (2.74) Suppose that at t = 0, the particle is stationary at x X0• Then A and B must be chosen so that {2.75) =
=
Thus
(2.76) and, hence,
- 'Ale-A•t. X = Xo 'A2e-A,t "-2 "-r It is clear from equation (2.77) that x can only be zero if 'A2e-A,t = "-re-A,t
or
(2.77) (2.78)
44
A C O U R S E I N A P PLI E D M A T H E MAT I C S
[CH.
But the right-hand side of this equation is less than unity, whereas the left-hand side is greater than unity if t is positive, for then the exponent of e is also positive. It follows that the motion subsequent to t = 0 does not cause the particle to pass through the origin. How ever, as t -+ oo, e->.,l -+ 0, e->.,1 -+ 0 and, hence, x -+ 0. As time elapses, the particle therefore approaches the origin, but never passes through it. If x is plotted against t, the graph of Fig. 2.10 results. It is clear
FIG. 2.10.-Aperiodic Motion
that the motion, which is oscillatory in the absence of friction, has had its character entirely altered by the presence of the new force. The motion which now occurs is termed aperiodic motion. If k = 2w, the characteristic roots are both - w and the general solution of the equation of motion is accordingly x=
(A + Bt)e-<»1.
(2.79)
The reader should verify that the solution appropriate to the initial conditions x = x0, i = 0 at t = 0 is
X X0(1 + wt)e-<»1 (2.80) and that the graph of x against t takes the form shown in Fig. 2.10. The motion is again aperiodic. If k < 2w, the frictional force is relatively small and, as might be =
expected, the motion retains its oscillatory character. The character istic roots are complex and, as the reader may easily verify, have negative real parts. Denoting them by -ct ± i�, the general solu tion of equation (2.72) is
e-o:1(A cos �t + B sin �t). The initial conditions x X0, i = 0 at t = 0, require that X0 A 0 = -etA + �B. x=
(2.81)
=
=
,
(2.82)
2]
Hence
N E WT O N ' S LAWS .
RECTILINEAR MOTION
A = X0, B = rxX0/f'> and x = X0e- 1 (cos fjt + sin fjt) ( rx2)! = X0 1 + � e"""'1 cos (f'>t - g,) , "'
rx
45
(2.83)
where tan g, = rxff'>. Since Ieos (f'>t - g,) l <; l for all values of t, the graph of
x against t must lie between the two exponential curves x = ±xo( l + �y e-"'1 • Both the graphs and the bounding curves are shown in Fig. 2 . 1 1 .
It is
X:
FIG.
2. 1 1.-Damped Vibrations
now clear that the motion is similar to SHM, but that the amplitude of the oscillations steadily decreases towards zero. x is zero with cos (f'>t - g,). It follows that rt/f'> is the time interval between zeros and that a complete oscillation takes place in time T, where
T = 2f'>rt = 2rt (1 _ 4�)-!• (1)2 (J)
(2.84)
i.e., the friction has increased the period of the oscillations by a factor
(1 - 4k�2)-t
An oscillatory system which is modified by the introduction of a frictional or other force having the effects described above is said to be damped. In case (i) we say that oscillations have been completely damped out and the particle (system) is overdamped. In case (iii) the
46
A C O U R S E I N A P P L I E D MAT H E M A T I C S
[CH.
particle (system) is underdamped and oscillations occur if it is displaced and released. In case (ii) the damping is just sufficient to prevent oscillations occurring and the damping is critical. We shall now suppose that the particle is subjected to an additional force which is a given function of the time. This force will be pre sumed applied by some external agency. If F(t) denotes the force acting in the direction x increasing, the equation of motion (2. 72) must be modified to read
mx = -mkx - mc1h + F (t) (D2 + kD + cu2)x = J(t),
or
(2.85)
where j(t) = Ffm. Such an equation is well known to possess a general solution which is the sum of two expressions (a) the comple mentary function (CF) and (b) a particular integral (PI). The CF is the general solution of equation (2.72). The forms which may be taken by this general solution have already been given, and a reference to previous work will show that, in all circumstances, this solution approaches zero as t � w. This portion of the general solution of equation (2.85) is therefore only of significance during the early phase of the motion and plays no part in determining the motion during the later stages. It is accordingly referred to as the transient, and we shall disregard it. The PI, on the other hand, will generally comprise terms which remain finite for large t. This part of the general solution therefore completely specifies the motion, except during a period immediately subsequent to the initial instant. It is referred to as the steady state. The constants of integration are associated with the CF and do not appear in the PI. The initial conditions therefore affect the transient, but have no influence on the steady-state motion. Thus, no matter what the motion of the particle is when the force F (t) is first applied, it will eventually settle down into a state of motion which is prescribed entirely by the form of the function F (t) . We will illustrate our general remarks by the case F(t) = A sin pt, i.e., the applied force is itself oscillatory and of period 2-rrfp. The equation of motion is (D2 +
kD + cu2)x = a sin pt,
where a = Afm. The PI may be calculated by as the imaginary part of aeiP1 (i = v' - 1). Then x
= PI = � D2 + k� + cu2 aeiPt iPt = � (ip) 2 +aekip + cu2 t iP ae = � (,)2 - p2 + ikp"
(2.86) regarding a sin pt
(2.87)
2]
N E WT O N ' S LA W S .
RECTILINEAR MOTION
47
Putting the complex quantity (1)2 - p 2 + ikp into its polar form rei8, where r2 = ((1) 2 - p2) 2 + k2p2 and tan 6 = kP/((1)2 - p2), equation (2.87) becomes
aeipt = f a- ei(pt - 8) = a sin (pt - 6) . x = PI = f � r re'8 r-
(2.88) equation (2.86).
This equation defines the steady-state solution of It reveals that the particle's motion is simple harmonic, of frequency pj2rt. The particle's oscillations are therefore synchronous with those of the applied force and are termed forced oscillations. The function j(t) on the right-hand side of equation (2.85), which represents the cause of these oscillations, is correspondingly called the forcing Junction. The phase of the particle's motion lags behind that of the applied force oscillation by a constant angle e. The amplitude of the particle's motion is b, where
(2.89) b clearly depends upon the frequency P/2rt of the applied force. +b will take a maximum value for variation of p when P ((1)2 - p2) 2 k2p2 =
takes its minimum value.
b
a w
�: �;
Differentiating P, we obtain
- 4p( (1)2 - p2) + 2k2p = (2k2 - 4 (1)2) + 12p 2 . =
k
<
(2.90)
-l2 w
FrG. 2.12.-Amplitude Response Characteristic
Hence, dPfdp = 0 when p = 0 or ((1)2 - tk2) t. Assuming k < y2(1), the latter stationary point is real. If such is the case, when p = 0,
A C O U RS E I N A P P L I E D M A T H E MAT I C S
48
[CH.
d2PJdp2 is negative and this stationary point is a maximum of P and so corresponds to a minimum of b. When p = (w2 - !k2)!, d2Pfdp2 is positive, and hence P is a minimum, i.e., b is a maximum and (2.91) As p -+ b clearly approaches zero. The graph of b against p is therefore as sketched in Fig. 2.12. k < y2w implies that the damping must be less than critical if the relationship between b and p is to be of the form shown pictorially in Fig. 2.12. oo ,
If the frequency of the applied oscillatory force is slowly varied, its amplitude being maintained constant, from what we have proved, we know that the amplitude of the particle's oscil lation will rise to a maximum when the frequency of A',--r--, the force is (w2 - !k2)lj210. At this frequency the particle is said to be in a state of resonance with the _t - .. A ';---t-.... force . It will be noted that if the damping is small, so that k2 can be neglected, the resonantfrequency is wj210, i.e., is equal to the natural frequency of oscillation of the particle under the action of the force - w2x alone. The cases when k > y2w and k = y2w will be left to the reader for analysis. l+c As an example of the manner in which forced oscillations may be induced in a mechanical system, we will investigate the motion of a particle which moves vertically whilst hanging from an elastic string whose upper end also moves vertically in some prescribed manner. In Fig. 2.13 A 1 represents the 0 +---�--. position of the upper end of the string when t = 0 and T � A its position at some later instant t. A 1A = F(t), P+-----Lt this function prescribing the motion of A. P is the position of the particle of mass m at time t. 0 represents the equilibrium position of the particle my when the string is motionless with its upper end at FIG. 2.13.-Forced A 1 OP = x. Letting l denote the natural length Oscillations on an Elastic String of the string and c its extension when the particle hangs in equilibrium, A 10 = l + c and equation (2.37) determines c, fL being Hooke's constant for the string. At time t, the string's extension is
:
f�t)
AP - l = x + c - F(t),
(2.92)
and its tension T is accordingly given by T
=
fL (X + c - F(t)) = fLX + mg - ILF(t).
(2.93)
Assuming that the particle is moving in a medium which gives rise
2]
N E WT O N ' S LAWS .
to a force of viscous friction of motion is
RECTILINEAR MOTION
mkx opposing the motion, the equation
mi = mg - T - mkx = - fLX + fLF(t) - mkx mi + mkx + fLX = fLF(t).
or
49
(2.94)
This equation is of the form of equation (2.85), and the motion of the particle is therefore of the type we have been discussing. In particular, if A executes SHM about A ', the particle will, in the steady state, perform a SHM about 0 at the same frequency. Provided the viscous friction is not too great, there will exist a frequency of oscillation of the point of suspension at which the particle will give a maximum response. At this frequency, the system is in the state of resonance. If F(t) = 0, i.e., A is stationary, the equation of motion (2.94) corresponds to equation (2.72) . If, therefore, the particle is displaced from 0 and released, it will execute damped oscillations of the type described at the beginning of this section.
A particle of mass m is hanging in equilibrium under gravity on the end of an elastic string having a Hooke's constant m. At time t = 0, the upper end of the string commences to move downwards with SHM of amplitude unity and frequency 1j27T. If is the downward displacement of m, from its initial position, at time t, show that until the string goes slack, = !(sin t - t cos t). Friction may be neglected. Employing the notation of equation (2. 9 4), k = 0, p. = m, F(t) = sin t. The equation of motion is therefore (D 2 + 1 ) = sin t. (i) The characteristic equation is >.2 + 1 = 0 and the characteristic roots are ±i. This implies that the CF is A cos t + B sin t. A PI is found by a standard procedure to be -!t cos t. Hence, the general solution of equation (i) is x = A cos t + B sin t - !t cos t. (ii) Differentiating, it follows that 7: = -A sin t + B cos t - ! cos t + !t sin t. (iii) But, at t = 0, x = 7: = 0 and so, from equations (ii) and (iii), we find that A = 0, B - !- = 0. It is now clear that x = !(sin t - t cos t), as stated. Because of the t cos t term, the particle will make ever-larger excursions
Example 6.
x
x
x
either side of its equilibrium position and, eventually, the string must go slack, and equation (i) is then no longer applicable. This is the form the phenomenon of resonance takes in the absence of friction (see Ex. 15 below) .
EXERCISE 2
1. The combined weight of a motor cyclist and his machine is 500 lb.
When free-wheeling down an incline of I in 40 their maximum speed
50
A C O U R S E I N A P P L I E D MATH EMAT I C S
[CH.
is 25 m.p.h. ; and 40 m.p.h. down an incline of 1 in 20. Assuming that air resistance varies as the square of the speed, and other resist ances are constant, find the h.p. which the motor must develop to maintain a speed of 50 m.p.h. on the level. (L.U.) 2. Let it be assumed that the effective rate of working of the engine of a motor car is represented by the expression hn(n1 - n), where n is the number of revolutions per second and h, n1 are certain constants ; also that the velocity v is equal to kn, where k is a constant. If there is a fixed resistance to the motion of the car equal to A times its weight (w), find the speed with which the car will ascend an incline of angle et.. If the value of k is capable of adjustment, show that to secure the best speed k must be equal to hn1f2w(A. + sin et.) , the best speed being hn12/4w(A. + sin et.) . If the maximum power of the engine is 20 h.p., the weight of the car is 1 ton and the best speed up a slope of 1 in 10 is 20 m.p.h., show that the best speed on the level is nearly 50 m.p.h. and find the best speed up a slope of 1 in 5. (M.T.) 3. A pile of mass M is struck by a hammer which exerts a force increasing linearly from zero to a maximum F in time T, and then decreasing linearly to zero in an equal time. The ground exerts a constant resistance R in excess of the weight of the pile, whilst the pile is moving, within the limits given by (2 - y2)F < R < F. Find the time during which the pile moves. (L.U.) 4. The attraction of the Earth for a particle of mass m distant r from its centre is mfLfr2, fL being constant. A particle is projected vertically with velocity V from a point on the surface If a is the radius of the Earth, show that, neglecting air resistance, the particle will fall back to its point of projection unless V2 > 2fLfa. If the latter condition is satisfied, prove that the particle will be at a distance r from the Earth's centre after a time t given by
(�3t t = v'c2x2 + 2cx - v'c2 + 2c + cosh-1(c + 1) - cosh-l(cx + 1),
a V2 where x = rfa and c = - - 2. fL
5. A particle P of mass m moves along a straight line through a point 0, and, at any instant, the distance OP is x. When x > a the particle is attracted towards 0 by a force mkfx2, and when x < a the particle is repelled from 0 by a force makfx3 • If the particle is released from rest at a distance 2a from 0, show that it will come to rest instantaneously when x = afy2, and find the time the particle takes to travel from (L.U.) x = a to x = afy2. 6. A particle is suspended under gravity from a fixed point by a light elastic string and, when the particle hangs in equilibrium, the string is extended to a distance c beyond its natural length. Show that the
2]
N E WT O N ' S LAWS .
RECTILI NEAR MOTION
51
period o f small vertical oscillations about the position o f equilibrium is 2rt(cfg)t. If the particle is released from rest at a distance 3c below the position of equilibrium, prove that it will rise for a time {2y2 - cos-1 ( 1/3) + rt} (cfg) !. (L.U.) 7. A particle of mass m moves from rest on a rough horizontal table under an attraction to a fixed point of the table proportional to its distance from the point. Show : (a) that there are two positions of limiting equilibrium on the line of motion ; (b) that if the initial dis placement is large enough the particle describes half-cycles of simple harmonic motion about these two positions alternately ; and (c) that it completes a whole number of half-cycles before coming to rest. (L.U.) 8. A particle P of unit mass is acted on by an attractive force k 2 OP towards a fixed point 0 of a line and also by a small disturbing force in the line of amount + fl. . OP2. If the particle is released from rest at the point A , where OA = + a. prove that the particle will come to instantaneous rest at points OP = x given by the equation �fl. (aa - xa) . k 2 (a2 - x2) I f after leaving A the particle first comes to rest at B , prove that =
AB
=
(
2a 1
-
r:2)•
where powers of fl. higher than the first are neglected. (L.U.) 9. A railway engine weighing 32 tons exerts a constant horse-power of 448 and the motion of the engine is opposed by a constant force equal to £- tons weight. Prove that the equation of motion of the engine is dv = v2 £- (88 v), dx where v is the speed in ftfsec, x is the distance travelled in feet, and g has the value 32 ftfsec2 Find the maximum speed of the engine in m.p.h. and prove that the engine attains a speed of 30 m.p.h., starting from rest, in approximately 423 ft. (L.U.) 10. A particle of mass m is projected vertically upwards from the surface of the Earth, and the resistance of the air is mv2fc, where c is a constant and v is the velocity. If the velocity at height cf4 is Vf2 and at height cf2 is V/4, prove that V2 = 16gc(ye - 1)/(4 - ye), and find the maximum height attained in terms of c and e . (L.U.) 1 1 . A particle of mass m moves in a straight line against a resistance av + bv 2, where v is the velocity and a and b are positive constants. Prove that the particle cannot move a distance greater than -
•
� log ( 1 � u) from the point at which its velocity was u and that it +
cannot attain this distance in any finite time. Confirm, by other considerations, the result that the particle cannot come to rest in a finite time and show that the result is also true for negative values of b. (L.U.)
52
A C O U RS E I N A P P L I E D M A T H E M A T I C S
[cH.
12. A particle of mass m moves through a medium which offers resistance av + bv3, where v is the velocity and a, b are constants. If this be the only force acting and if the particle be given an initial velocity u, prove that it will come to rest after traversing a distance
7a
( J�) ( )
tan-1 u · v b) Show also that the velocity becomes !u after a time t given by 2at = 4a + buz log · m a + bu2 (L.U.) 13. A particle of unit mass moves in a straight line under a constant power H and a resistance !kv, where v is the speed of the particle. Prove that v tends to the limiting value V, where V = (2Hfk)t. In the absence of the resistance, the particle's speed increases from u to 3u(3u < V) in moving through a distance a. Prove that, when the resistance is also acting, the time required for the particle's speed to increase from u to 3u is 1 (L.U.) k log {(52u - 3ak)f(52u - 27ak)}.
14. A car of mass m moves on a level road. The engine works at a constant rate R, and there is a constant frictional resistance, the maximum velocity attainable being w. Prove that the distance in which the car, starting from rest, acquires a velocity V is mws ___!!!___ - _!:::" - vz log . w- V w 2w2 (M.T.) R 15. A particle P of mass m moves along a straight line under the action of a force mw2 OP directed towards a fixed point 0 of the line and a force mF sin pt, t being the time variable. Show that, if friction is sufficient to damp out the transient but may otherwise be neglected, in the steady state F sin pt OP = � ' (p =/= w) . w - pz Calculate the steady state solution when p = w and graph the ampli tude of the particle's oscillation as a function of p. 16. A ship of mass m moves from rest under a constant propelling force mf and against a resistance mk times the square of the speed. Prove that, when the ship has travelled a distance a, its speed v will be given by kv 2 = /(1 - e-zka) . If now the engines are reversed, show that the additional distance b travelled before the ship comes to rest will be given by e2kb + e-zka = 2 . (S.U.) 17. A particle of mass m can move in a straight line and is subject to a force rx.t at time t such that the force acts along the line of motion. The motion is opposed by a resistance of magnitude kv, where k is a constant and v the velocity of the particle. If the particle starts from rest show that at time t it has moved through a distance s given by rx.m2 (1 - e--ktfm) + ocez - rx.mt. s = k3 2k k2 (D.U.)
{
•
}
2]
N E W T O N ' S LAW S .
R E CT I L I N E A R M O T I O N
53
18. A particle moves from rest under a force which works at a constant p power P. Prove that the distance moved in time t is ta where m m is the mass of the particle. (Q.U.) 19. A light elastic string A B, of natural length l and modulus /.., lies slack and at rest on a smooth horizontal plane. A particle of mass m, also at rest, is attached to one end A of the string. The other end B of the string is pulled along the plane with a constant velocity V away from A along a straight line through A . Determine the time that elapses after the string first becomes taut until it becomes slack again. Show that the particle will have travelled a total distance 2l + Vrt(mlfJ..) t by the time it catches up with B. (B.U.)
(: Y,
20. A particle of unit mass moves along the x-axis under the attraction of an attractive force of magnitude 4x towards the point x = 0, and a resistance equal in magnitude to twice the velocity. If the particle is released from rest at x = a, find its position at any time, and show that its velocity is given by
-
J ae-•
sin y3t. 3 Show that when the particle is instantaneously at rest on the positive side of x = 0, after completing n full oscillations, its coordinate is ae-2n"'fv'3 • (Le.U.) i
=
21. A spring lies at rest on a horizontal plane and has one end fixed. A particle of mass m attached to the free end of the spring is projected with a velocity V directly towards the fixed end. The motion of the particle is opposed by a frictional resistance which is of magnitude mkv when the velocity is v, and the spring exerts a restoring force of magnitude mk2x when compressed through a distance x. Find the time during which the particle travels in the direction of projection before first coming to rest, and show that the distance traversed in this time is (Le.U.) Ve-"'13v'3fk. 22. In the case of damped vibrations governed by equation (2.72) , show that the natural logarithm of the ratio of two consecutive extreme distances from the origin is rtkfn, where n2 = 4w 2 - k 2 • This constant is called the logarithmic decrement. 23. A light elastic string, of natural length 2a and modulus Smg, is stretched between two fixed points A and B of smooth horizontal table, distant 4a apart. A particle of mass m is fastened to the mid-point of the string. Show that the period of small oscillations of the particle in the line of the string is !rty(afg) . Show also that, if the particle be pro jected from its equilibrium position in the direction AB with a velocity -yi(56ga), it will just reach B in a time
1J� {cos-1y� + y2 cos-1%}·
(S.U.)
54
A C O U R S E I N A P PLI E D M A T H E M A T I C S
[CH. 2]
24. A light spring AB is coiled round a fixed smooth vertical bar. If the lower end A of the spring is fixed and a bead of mass m threaded on the bar rests on the upper end B, the extent to which the spring is com pressed is b. Show that the period of small vibrations of the bead is 27tfw, where w2 = gfb. The end A of the spring is now made to perform a vertical simple harmonic motion of period 1tJ w and amplitude a, and at time t 0, A is in its lowest position and B is momentarily at rest at its original equilibrium position 0. Show that at time t the displacement of the bead below 0 is ta(cos wt - cos 2wt), provided the bead remains in contact with the spring. Find the great est downward acceleration of B and show that the contact will cease at some stage of the motion if 5aw2 > 3 g. (S.U. ) =
CHAPTER 3
CARTESIAN AND INTRINSIC RESOLUTES OF ACCELERATION
3.1 Resolving the Equation of Motion Since, by equation (2.1), the resultant force acting upon a particle of mass m is, at all times, represented by a vector F, which is parallel to the acceleration vector f for the particle and m times it in magnitude, the components of F in any three directions will be m times the com ponents of f in the same three directions. These directions need not be mutually perpendicular, but, since it is easier to calculate the various components when the directions satisfy this condition, it is usual to restrict them in this way. In particular, if the motion takes place in a plane, we can resolve the two vectors in any one of the three pairs of perpendicular directions considered in Section 1.4 and for which we have expressions for the resolutes of f. In this chapter, we shall study problems which may be solved by the resolution of f and F into (i) Cartesian components, and (ii) tangential and normal components.
3.2. Cartesian Components. Projectiles
Consider the motion of a projectile P of mass m, which moves under the Earth's attraction. We shall, at first, neglect air resistance, the variation of the attraction with the height above the Earth's surface and the curvature of the latter. Suppose the projectile is shot from a point 0 on the surface, with speed V making an angle rt. with the horizontal. Taking rectangular Cartesian axes Ox, Oy, such that Ox is horizontal and Oy is vertical (upwards) , let (x, y) be the coordinates of the projectile at time t after projection. The only force acting on P is that due to the Earth's attraction, and this is of magnitude mg in a direction parallel to Oy (see Fig. 3.1). The com ponents of the acceleration of P in the directions of the axes are (x, :Y) (Section 1 .4). The components of the force acting on P in the same pair of directions are (0, -mg). Accordingly, we have the equations of motion
mx 0, my = -mg, x = 0, y = -g. =
or
55
(3 . 1 )
A COURSE I N APPLIED MATHEMATICS
56
.X = 0 implies that x is constant. But velocity and is initially V cos r�:. Hence
x=
V cos
[cH.
x is the x-component of the
r�: .
(3.2)
Integrating again with respect to t,
X = Vt cos r�:, the integration constant being zero, since x =
(3.3)
0 when t = 0.
y DI R E CT R I X
y
' ' ' ' '
I ' ' I I
FIG. 3.1 .-Parabolic Motion under Gravity
Integrating y
= -g with respect to t, we obtain y = V sin r�: gt, -
G
(3.4)
V sin a. being the constant of integration, since y = V sin r�: at t = 0. Integrating equation (3.4) with respect to t, since y = 0 when t = 0, y = Vt sin
r�:
-
tgt2 •
(3.5)
Suppose the trajectory meets the horizontal plane through 0 in the point G. OG is called the horizontal range. At G, y = 0 and hence, from equation (3.5), 2V t = ta = g sin r�:' .
(3.6)
3]
R E S O L U T E S O F A C C E L E RAT I O N
57
the alternative root t = 0 corresponding to the point 0. Equation (3.6) gives the time of flight to G. Substituting from equation (3.6) into equation (3.3), we calculate that, after this time has elapsed, V2 2V2 x = OG = - sin IX cos IX = - sin
g
g
21X.
(3.7)
Equation (3.7) shows that the horizontal range which will be achieved with a given velocity of projection V, is a maximum when IX = rt/4 , and is then V2fg. When the projectile is at the highest point H of its trajectory (the vertex), its velocity will be horizontal and, thus, y = 0. Equation (3.4) shows that this occurs when
t tH vg Sin. IX. =
=
(3.8)
-
We note that tH = tt6. Substituting from equation (3.8) into equa tions (3.3) and (3.5), we obtain the coordinates of H, viz., V2 . V2 . X = XH = g Slll IX COS IX = Slll
2g
y = YH = V2g2 sin2 IX.
21X,
(3.9) (3.10)
We note that XH = txa. Equations (3.3) and (3.5) are parametric equations of the trajectory. Eliminating the parameter t between them, we obtain the equation of the trajectory in the form
g x2 sec2 IX. y - x tan IX 2V2
(3.11)
The expression on the right-hand side of this equation being a quad ratic in x, the trajectory must be a parabola. To obtain the equation of this parabola in standard form, we shift the origin to the vertex H, where we erect new axes HX, HY, HX being parallel to Ox and HY being vertically downwards. Let (X, Y) be the coordinates of P relative to these axes. Then X = X + XH,
y = YH Y. -
(3.12)
Putting xH and YH equal to their values as given by the equations (3.9), (3.10) and substituting in equation (3.11) for (x, y), we find that (X, Y) satisfy the equation
2V2 X2 = - cos2 IX g
. Y.
(3.13)
58
A C O U R S E I N A P P L I E D MATH EMAT I C S
[CH.
The parabola is now seen to have latus rectum of length 2V2 cos2 rx.fg and focus at the point 2 (3.14) X 0, Y V cos2 rx.. =
=
2g
The corresponding (x, y)-coordinates of the focus are found from equations (3.12) to be V2 . (3.15) x sm 2rx., =
2g
V2 2 - sin rx.
2
2
V V - cos2 rx. = - - cos 2rx. . - 2g (3.16) 2g 2g The directrix is the line Y = - V2 cos2 rx./2g, i.e., it is the line V -2g2 s1n. 2 rx. + 2gV-2 cos2 rx. = V-2g2 y (3.17) Equation (3.17) shows that the height of the directrix above the point of projection is independent of the angle of projection. If v is the speed of the projectile at time t, equations (3.2), (3.4) and (3.5) show that y
=
=
v2 = x2 + y 2 V2 cos2 rx. + (V sin rx. - gt) 2 V2 - 2Vgt sin rx. + g2t2 = V 2 - 2g(Vt sin rx. - !gt2) = V2 - 2gy. =
=
(3.18)
The depth of the projectile below the directrix at this instant is V2 - y. If, therefore, the particle were allowed to fall from the
2g
directrix to this point, it would acquire a speed u, where u2
=
2g(�; - y) = V2 - 2gy = v2,
(3 .19)
using equation (3.18). Hence u v and the speed of the projectile, at any instant, is equal to the speed it would acquire in falling from the directrix of the trajectory to its position at this instant. Let us now consider the anti-aircraft gunnery problem. Referred to the axes through 0, let (x0, Yo) be the coordinates of a target A. The velocity of projection V being given, it is required t o choose the angle of projection rx. so that the trajectory of the missile passes through A. Let T be the time of flight to A. Equations (3.3) and (3.5) show that the requirement is satisfied if =
rx.,
VT COS = o VT sin rx. Y X0
=
-
!g T2.} ·
(3.20)
R E S O L U T E S O F A C C E L E RAT I O N
3]
a:.
V and g, these two equations fix T and Eliminat Yo = X0 tan gx2Vo22 sec2 = X0 tan gx2Vo22 ( l + tan2 ) 2 2V 2V2y2 o + l = 0, tan2 - tan + -(3.21) gxo gxo (x0, Yo)
Given and ing T, we obtain
a:
or
59
a:
-
a:
-
a:
a:
-
a:
i.e., a quadratic for tan a:. If this quadratic has two distinct real roots there are two possible angles of projection. If the roots are complex there is no angle of projection which will cause the missile to strike A ; this implies that A is out of range. If the roots are real and equal, A is just within range and there is a unique angle of projection with the required property. For equal roots, we must have
V4 2V2y g2xo2 = gxo2 o + l , i.e., the point (x0, Yo) lies on the curve 2V2 (V2 -y) . x2 = g 2g
(3.22)
(3.23) This is a parabola with its vertex at the point (0, V2j2g), axis vertically downwards and latus rectum of length 2V2Jg (see Fig. 3.2). D I � E C T � I )(
OF
PAR
B O LA
OF
SAFETY
FrG. 3.2.-The Parabola o f Safety
V2j2g
The focus is therefore a distance below the vertex, i.e., is at 0. The directrix is at a height above the vertex, i.e., is at a height above 0. This is twice the height of the directrix of any tra jectory. Any target on this parabola is j ust within range from 0. Any target above this parabola is out of range from 0. The parabola is accordingly known in ballistics as the parabola of safety. It is the
V2Jg
V2J2g
60
A C O U R S E I N A P P L I E D MATH E MA T I C S
[CH.
envelope of all the possible trajectories emanating from 0 with constant velocity of projection Suppose, then, that the point (x0, is below, or on, the parabola of safety and hence equation (3.21) has real roots. Let these be tan and tan cx2 • Then
V
Yo)
<%1
(3.24) and hence, tan ( <%1
<%1 + tan <%2 = - � = -cot e, + <%2) = ltan- tan <%1 tan <%2 Yo
where e = LAOx (the angle of sight to the target from deduce from equation (3.25) that
<%1 + <%2 = t7t + e <%1 - (!7t + te) = (!7t + te) - <%2·
or
(3.25) 0).
We
(3.26)
Thus, there are two possible directions of projection by which we can reach any target A from 0, and they are equally inclined to the line If A lies on the parabola of safety, through 0 of slope (!7t <%1 = <%2 and equation (3.26) shows that the angle of projection must be !1t Eliminating between the equations (3.20) as follows :
+ te).
+ }-e. <%
Xo ' sm <% = Yo +VT-}-gT2, <% = VT 02 (y T2) 2 ' l = cos2 <% + sin2 <% = X + o2 +2 2 g VT 2 4 4 V T4 + g- (Yo - -g ) r2 + g (Xo2 + Yo2) - (3.27) we obtain a quadratic for T2 • If the point A is below the parabola of safety, this equation must have real positive roots. Let them be T12, T22, where Tv T2 are the times of flight to A along the two possible paths. Then T12T22 - g4 (Xo2 + Yo2) -- 4d-g22' where d2 = X02 + Yo2 = OA 2• Hence ·
cos
.1
2
-
o
'
•
2
(3.28)
R E S O L U T E S O F A C C E L E RAT I O N
3]
61
Suppose a gun is at a point 0 on an inclined plane and let the vertical plane of fire through 0 intersect this plane in a line of slope e (Fig. 3.3). The parabola of safety corresponding to the gun's velocity of projection V intersects this line in a point E, which is at extreme range in this direction along the plane. Let EN be the perpendicular from E on to the directrix of the parabola of safety. From a fundamental property of the parabola it follows that OE = EN. Thus, if OE = R,
V2 - R sin e NM - EM = g 2 V R - --;(-o-----,----.------=g 1 + sin e)
R or
=
(3.29)
This last equation specifies the extreme range along a line of slope e.
N
0
FIG. 3.3.-Maximum Range on an Inclined Plane
A particle is projected under gravity with velocity V in a direction making an angle £1 with an upward line ofgreatest slope of a plane of inclination the point of projection being on the plane. The motion takes place in the vertical plane through the line ofgreatest slope. Show that if the particle strikes the plane at an angle with the horizontal, then e is given by the equation (1 + 3 tan• ) tan e = 2 tan In this case show that the velocity with which the particle strikes the plane is Vfy'(l + 8 sin2cx). (L.U.)
Example 1. ex,
ex
C<
ex.
Relative to axes Ox, Oy through the point of projection 0 (see diagram), the parametric equations of the trajectory are
Vt cos (() + ) y Vt sin (e + ex) - tgt•.} x = =
ex ,
(i)
62
A C O U R S E I N A P P L I E D MAT H E M A T I C S
[cH.
At the point o f striking the sloping plane A , yfx = tan "' and hence Vt sin (a + ct) = tan "' Vt cos (fl + ct) 2V t= [sin (a + ct) - tan "' cos (a + ct)]
- !gt2
g
2 V sin a = - · -- · g cos "'
(ii)
!I
X
Differentiating the equations (i), we obtain x = V cos (a + ct) , y = V sin (a + ct) Hence, at A, x = V cos (a + ct) , y = V sin (a + ct)
- gt. 2 sin a cos "'
(iii)
But the velocity at A makes an angle "' with the horizontal and hence, at this point, -yfx = tan "'· Thus, by the equation (iii), 2 sin a - sin (a + ct) cos "' (iv) = tan "' . cos "' cos (a ct) Whence, expanding sin (a + ct) , cos (a + ct) and dividing the numerator and denominator of the left-hand side of equation (iv) by cos a cos• ct, we find that 2 tan 6 sec• "' - tan a tan "' = tan "' I - tan a tan e< tan 6 2 tan a tan• "' - tan "' = tan "'' I - tan fl tan e< (I + 3 tan• ct) tan (l = 2 tan "' (v) i.e., From this equation, it is easy to deduce that I + 2 sin• "' . 2 sin "' cos "' , cos a = sin a = V I + 8 sin2 "' V I + 8 sin2 "' Hence, from the first of equations (iii), V cos e< a (vi) X = V(COS ua COS C< - Slll u Slll e<) = _ 1 -v I + 8 sin2 "'
+
-
+
·
·
·
•
3]
R E S O L U T E S O F A C C E L E RAT I O N If is the velocity of arrival at
v
A, :i: = v cos "'
·
63
It follows that
v = x. sec "' = VI + v8 sin2 "'. Example 2. A particle is projected with velocity V from a point A, and moves under uniform gravity along a parabolic trajectory having focus S. Show that V2 = 2g . SA. A particle slides down a smooth inclined plane along a line ofgreatest slope from a point P to a point Q where it leaves the plane and falls along a parabolic trajectory under gravity. If S is the focus of the parabola and the particle starts from rest at P, show that LPSQ is a right angle. (L.U.) The point of projection A being on the parabola, its distance from the focus S is equal to its distance from the directrix. This latter dis tance has been proved to be V2f2g. Hence SA = V2f2g, or V2 = 2g. SA. The forces acting on the particle of mass m as it slides down the plane are the weight mg and the smooth reaction R, normal to the plane. If f is the particle's acceleration down the plane, the equation of motion resolved in this direction is mg sin "' = mf, or f = g sin "' being the angle of slope. The acceleration is therefore constant and we may apply equation (2.18). If V is the speed at Q, (i) V2 = 2g . PQ . sin "' = 2g . PN, . PN being the vertical height of P above Q. V is the velocity of projection into the parabolic trajectory at Q, and hence the directrix of this curve is a height V2f2g = PN above Q. Thus, the directrix passes through P. The direction of motion at Q is along PQ. This implies that PQ is tan gential to the parabola at Q. Now, since the segment of a tangent to a parabola between the point of contact and the directrix subtends a right angle at the focus, LPSQ = 90°. Consider a particle of mass m moving in a vertical plane under the action of its weight mg and air resistance proportional to its speed v and in a direction always opposite to that of the motion. We shall take the air resistance to be mkv. Erecting axes Ox, Oy as before through the point of projection 0 (see Fig. 3.4), let (x, y) be the co ordinates of the projectile at time t after projection. If if; is the angle made by the direction of motion with the x-axis at time t, the x- and y-components of the resultant force on the particle at this instant are ( -mkv cos if;, - mkv sin if; - mg). But (v cos if;, v sin if;) are the a,
x- and y-components of the velocity, viz., (i, y).
Hence the force
64
[CH.
A C O U R S E I N A P PL I E D MAT H E M A T I C S
components may be written ( - mkx, - mky - mg) . The corresponding components of the acceleration vector are (.X, y). Thus,
mi -mkx, my = - mky - mg, x -kx, :Y - ky - g, =
or
(3.30)
=
=
are the equations of motion. X=
f
cos Ol
FIG. 3.4.-Resisted Motion under Gravity
Writing the first of the equations (3.30) in the form dtjdx we can integrate with respect to x to obtain
or
=
t = - � log x + constant,
- 1/kx,
(3.31)
where A is a constant of integration to be determined by the initial conditions. Suppose the missile is projected from 0 with a velocity V, making an angle a: with Ox. Then, when t = 0, x = V cos a:. Thus A = V cos a: and
x
Integrating with respect to we now find that
=
t,
Ve-kt cos
a: .
and observing that at
v cos a: x- -k
(1 - e-kt) .
(3.32)
t = 0,
X =
(3.33)
0,
RESOLUTES O F ACCELERATIO N
3]
65
dt = - I (3.34) ky + g" we can integrate with respect to y. The result is = - � log (ky + g) + constant or (3.35) -- Be-kt - fi,k B being an integration constant. When = 0, y = V sin rx and hence B V sin rx + gjk. Equation (3.35) is therefore written (3.36) y = ( V sin rx + i) e-k1 - { Integrating this equation with respect to t and using the fact that y 0 at t = 0, we find that y = � ( V sin rx + f) (I ) �(3.37) Writing the second of the equations (3.30) in the form
dy
t
. Y
t
=
=
- e-kt
-
Equations (3.33), (3.37) constitute parametric equations for the trajectory. If t is eliminated between these equations, we calculate the equation of the trajectory to be
( rx + lv sec rx ) x + � log ( I � x sec rx ) . -
y = tan oo ,
(3.38)
As t-+ e-kt-+ 0 and hence equation (3.33) shows that x-+ V cos rxjk. For large values of t, x remains steady at Vthecosvalue rxjk. V cos rxjk, i.e., the particle falls vertically along the line x This line is asymptotic to the trajectory as indicated in Fig. 3.4. Equations (3.32) , (3.36) show that, as t-+ x -+ 0, y-+ -gjk. This implies that the particle is eventually falling vertically with a speed gjk. This is the terminal velocity at which the weight force =
oo,
is exactly balanced by the air resistance. Let OQ be the line of projection (Fig. 3.4), and let QP be the vertical through the missile P at time t. Putting OQ = �. PQ = 1), (�, 1l ) are termed the of P. The relationship between these coordinates and the Cartesian coordinates of P is easily shown to be given by the equations
Littlewood coordinates �=
x sec rx,
1) =
x tan rx - y.
v (I - e-k'), = � - � ( I - e-kt) .
(3.39)
Substituting from equations (3.33) and (3.37) , we find that �= k 1l
D {I)
(3.40)
66
A C O U R S E I N A P P L I E D MAT H E M AT I C S
[CH.
These are the most convenient equations for specifying the trajectory. It will be observed that (�. lJ ) depend upon t only and are independent of the angle of projection. If, therefore, the muzzle velocity V of a gun at 0 is known, tables of the functions (�. "IJ ) can be computed from which the trajectory for any angle of projection may be quickly determined. Practical ballistics is concerned with the motion of a shell moving through the atmosphere, a medium which does not lead to the simple resistance law we have been assuming. However, it is found that Littlewood's coordinates are only weakly dependent upon oc, with the consequence that, when tables of (�. "IJ ) corresponding to a few values of oc are available, a process of interpolation permits the calcula tion of these functions to a high degree of accuracy for any other value of oc and hence the determination of the trajectory.
A particle of mass m is projected under gravity with a velocity whose horizontal component is u in a medium in which the resistance acts along the tangent and is equal to mk times the velocity . Show that the resultant force acting on the particle is constant in direction, and that when the particle has travelled a distance x horizontally, its magnitude is equal to (l - kxfu) times (M.T.) its initial value. Employing our previous notation, u = V cos o:. Differentiating equations (3.32), (3.36), we find that .i' = -Vke-k' cos o:, y = -k ( V sin o: + !) e-k•.
Example 3.
The Cartesian force components are accordingly
- Vmke-k• cos o:, -mk ( V sin o: + i) e-k•
(i)
and, if q, is the angle made by the resultant force direction with the x-axis, tan q, = tan o: +
ffk sec o:,
indicating that q, does not vary with Let (X, Y) be the Cartesian force components at = in equations (i), we find that
t.
X=
t 0.
Putting
-Vmk cos o:, Y = -mk ( V sin o: + i)
t =0
and hence, the components of force at time t are (Xe-k', Ye-kl) . The resultant force at this instant is therefore e-ki(X2 + Y2)l, i.e., times the magnitude of the force at = Since, by equation (3.33), = 1 this proves the result stated.
t 0.
e-k'
e-k<
-
3.3. Cartesian Components. Elliptic Harmonic Motion
kxfu,
We will now consider the motion of a particle P which moves in the plane of fixed axes Ox, Oy, under the action of a force which is pro portional to the particle's distance from O(OP = r) and is always directed towards 0. The rectilinear motion of a particle subjected to such a force has been analysed in Section 2.3(2) and has been shown to
3)
R E S O L U T E S O F A C C E L E RAT I O N
67
possess an oscillatory character. Letting mfl.r denote the magnitude of the force, we see from Fig. 3.5 that the Cartesian components of force are (-mfl.r cos 6, -mfl.r sin 6) , or ( - mfLX, -mfl.y), if (x, y) are
FIG. 3.5.-Elliptic Harmonic Motion
the coordinates of P. The equations of motion of the particle are accordingly
mx - mfl.X, my = - mfl.J, x + w 2x = 0, y + w2y = 0, =
or
(3.41)
where w2 = fl.· These equations imply that the coordinates (x, y) oscillate in a simple harmonic manner during the motion, i.e., that the projection of the motion on to either axis (and therefore on to any straight line, for the axis directions are open to choice) is simple harmonic. We have already determined the general solutions of equations such as (3.41) (see equation (2.31)). They are x
= A sin
wt + B cos wt, y C sin wt + D cos wt, =
.
(3.42)
A , B, C, D being constants of integration determined by the circum stances of projection at t = 0. Solving equations (3.42) for sin wt and cos wt, we find that (AD - BC) sin (A D - BC) cos
wt = Dx - By, wt Ay Cx. =
-
.
(3.43)
68
A C O U R S E I N A PPLI E D M A T H E MA T I C S
[cH.
If AD = BC, clearly yjx = CJA = DjB and the trajectory is a straight line through the origin. The motion is rectilinear, and hence must be simple harmonic. This type of motion has already been discussed. If AD -=1=- BC, by squaring and adding equations (3.43), we eliminate t to obtain
(C2 + D2)x2 - 2(AC + BD)xy + (A 2 + B2)y2 = (AD - BC) 2 .
(3.44)
This is the equation of the trajectory. Being of the second degree, it represents a conic. Having no terms of unit degree, the conic has a centre at 0. Finally, since (A 2 + B2)(C 2 + D 2) > (AC + BD) 2, the conic is an ellipse. Suppose, now, we choose the directions of the coordinate axes to be those of the ellipse's axes and the instant t = 0 to be that at which the particle is at the positive end of the conic axis along Ox. As suming the motion to be in the counter-clockwise sense, at t = 0 the particle will have a velocity parallel to Oy. Let the magnitude of this velocity be V and let a be the particle's distance from 0 at this instant. The initial conditions are then x = a, y = 0, i = 0, y = V. Hence, from equations (3.42), and
a = B, O = A oo, O = D, V = Coo, x
= a cos oot,
y
= -v sm. oot. (1)
(3.45)
Equations (3.45) are the parametric equations of an ellipse of semi axes a and Vjoo. It also appears from these equations that the ec centric angle of P at time t is oot, i.e. , the eccentric angle increases at a uniform rate oo during the motion. The eccentric angle increases by 21t and the particle makes one complete circuit of the ellipse in time
T = 21t" .
(3.46)
(1)
Relative to such axes, we see from equations (3.45) that the ampli tude of the x-oscillation is a and of the y-oscillation is b = Vjoo. Let (u, v) denote the Cartesian components (i, y) of the velocity of P at time t. First integrals of the equations (3.41) are then (see equation (2.26)), u2 = oo2 (a2 x2), v2 = 002 (b2 y2) . (3.47) _
_
Adding these equations, we have where w
w2 = oo2 (a2 + b2 - r2),
= (u2 + v2) ! is the magnitude of P's velocity and r = (x2 + y2) ! = OP.
(3.48)
3]
R E S O L U T E S O F A C C E L E R AT I O N
69
A particle P, of mass m, is moving in a plane under an attraction 2m . OP towards a fixed point 0 in the plane and a resisting force 3mv, where v is the speed of P. Show that the equations of motion in rectangular Cartesian coordinates with origin 0 are x + 3x + 2x = 0, ji + 3y + 2y = 0. Deduce that, in general, P describes a parabola passing through 0 and that it reaches 0 after an infinite time. (L.U.) The velocity of the point P has components (x, y) parallel to the axes and, hence, the resisting force has components ( -3mx, -3my). The equations of motion are accordingly mx = -3mx - 2mx, mji = -3my - 2my,
Example 4.
which are equivalent to those stated. Both the equations of motion are linear with constant coefficients. They have the same characteristic equation, viz., ,\2
+ 3:\ + 2 = 0.
The characteristic roots are - 1 , -2 and the general solutions for are therefore,
x and y
x = Ae • + Be-••, y = Ce-• + De-21 (i) e-• and e-••, we obtain (AD - BC)e-• = Dx - By, (AD - BC)e-•• = Ay - Cx. (ii) If AD = BC, yfx = DJB = CJA and the trajectory is a straight line through the origin. In general, however, by eliminating e-• between the equations (ii), we obtain the equation of the trajectory in the form (iii) (Dx - By) 2 = (AD - BC)(Ay - Cx). •
-
Solving in these equations for
Equation (iii) clearly represents a conic and, since the second-degree terms form a perfect square, it is a parabola. That the curve passes through the origin is also clear from its equation. As oo, and equations (i) show that i.e., the particle approaches the origin, but does not arrive at this point in a finite time.
(x, y) -+ (0, 0},
t-+ e-'-+ 0, e-21 -+ 0
3.4. The Energy Equation
Suppose that a particle P of mass
m moves in a plane under the action
F
of a resultant force F (Fig. 3.6). Let the curve DAB be a part of its tra j ectory. If e is the angle made by the force with the direction of motion at any instant, resolving the equation of motion in this direction, we obtain s
d m ds (lv2)
= F cos e,
(3.49)
being the distance moved by P along its track from some fixed point D, and v being the speed of the particle at time t.
D
FIG. 3.6.-Plane Motion of a Particle
8
A COURSE
70
IN
A P P L I E D MAT H EM A T I C S
[CH.
Suppose that the particle moves from A to B during the time in terval Quantities which are to be given their values at will be distinguished by a suffix and those which are to be given their values at by the suffix l. Integrating the equation with respect to over the interval we obtain
(t0, t1). t = tv s
t = t0 (3.49)
0
(s0, s1),
(3.50) tmv2
Kinetic Energy v.
m
is called the (KE) of a particle of mass moving with a speed It is a scalar quantity. The left-hand side of equation therefore represents the increase in the particle's KE as it moves along its track from A to B. The right-hand side of equation may be interpreted by re ference to equation where it is shown to represent the work done by the force acting on P as the particle moves from A to B. Accordingly, we have proved the result :
(3.50)
(2.7),
(3.50)
Increment in KE = work done by the applied force.
(3.51)
Although this equation is a direct consequence of the tangential equation of motion, it is essentially simpler, for, unlike the equation of motion, it does not involve a second-order derivative. The KE de pends upon the speed of the particle, rather than its acceleration, and is therefore expressed in terms of first-order derivatives only. On this account, it is frequently convenient to replace one of the equations of motion by an equation expressing the principle As a simple example, consider the problem of the projectile moving in a vertical plane under gravity alone. Employing the notation described in Section as the projectile moves from the point of projection to the point (x, the work done by gravity is
(3.51).
(0, 0)
3.2,
y), { -mg dy = -mgy,
(3.52)
!mv2 - tmV2 = -mgy or v2 = V2 - 2gy which is equation (3.18).
(3.53)
v !mv2 - !mV2.
and, if denotes the speed at the latter point, the increment in the KE Hence is
Provided frictional forces are absent, i t frequently happens that the work done by the forces acting on a particle as it moves from A to B is independent of the mode of motion between these points. This is clearly the case, for example, in the problem of the projectile just considered. The work done by gravity as the particle moves between the points (x0, (x1 , will be no matter how the
y0),
y1)
-mg(y1 - y0),
R E S O L U T E S O F A C C E L E RAT I O N
3]
71
transference between these points is effected. I f such is the case, the forces are said to be and we can define a quantity termed the (PE) of the particle. The PE of the particle when at a point is defined to be the work which would be done by the forces acting upon it, if it were to move from to some arbitrarily chosen datum point D. Thus, in the case of the projectile at the point choosing the point of projection 0 as the datum point, the work which would be done by gravity if it were moved from P to 0 is This is the PE of the projectile at A problem which will often occur in our later work is that of calculat ing the PE associated with the force acting on a particle due to a stretched elastic string. Suppose the particle is at some point and is con nected to a fixed point 0 by an elastic string of 0 modulus "A and natural length (Fig. 3. 7) . Let the datum position D be selected such that when FIG. 3.7.-Potential Energy due to an Elastic the particle is at this point String the string is its natural length. We shall prove that, if the particle is taken from to D by any path, the work done by the tension T of the string acting on the particle is always the same. Let Q be any intermediate position of the particle on its path and Let cp be the angle between the let OQ = At Q, T = ).. tangent to the path and the string. Let the arc DQ be denoted by Then cos cp The work done by T as the particte moves from to D is the negative of the work done as the particle moves from D to ; i.e., it is
conservative Potential Energy P
P
P(x, y}, mgy.
P
P.
P
l
P
r.
P P
(r - l)Jl.
=
s.
drjds.
1: T cos cp ds 1: f (r - l) �: ds P = J � (r - l)dr l P = J ")...__ (r - l)2 / 2l =
D
)..x2
= u'
/)
(3.54)
72
A COURSE I N APPLIED MATHEMATICS
[CH.
where x is the extension of the string at P. This result is observed to be independent of the path, and therefore represents the PE due to the stretched string when the particle is at P. It will be noted that we have assumed that the string does not go slack during the particle's motion from P to D. If this is not the case, the reader should show that the argument may be modified to yield the same result as before. In general, taking D to be some point on the path of the particle (Fig. 3.6), if represents the PE of the particle at any point on its path, the work which would be done by the forces acting on the particle if it were to be moved from B to D is, by definition, the PE of the particle at B, viz., Similarly, the work which would be done by these forces if the particle were moved from A to D is We can now conclude that the work which would be done if the particle were moved from B to A is In the actual motion the particle moves from A to B and the work done by the forces is therefore Equation (3.50) can therefore be written in the form
V
V1•
V0•
V1 - V0•
-(V1 - V0).
tmv12 - !mv02 = -(V1 - V0), tmv12 + V1 = tmv02 + V0• (3.55) or The quantity ( tmv2 + V) is termed the total energy E of the particle at any instant. Equation (3.55) indicates that E does not change its
value as the particle moves from A to B. Since B is an arbitrary point on the particle's track, this implies that the total energy remains constant throughout the motion. Thus
E = constant. This is the Energy Equation.
(3.56)
KE and PE are mechanical forms of energy. The molecules of a piece of material are well known to be in a state of vibration. The mechanical energy associated with this motion is the heat energy possessed by the material. There are other forms of energy which are not reducible to the mechanical forms, e.g., the energy associated with wireless waves. It is a fundamental law of modern physics that the total energy of all forms present in the universe is a constant, so that, as any phenomenon develops, there is a transformation of energy from one form into another, but no net loss or gain of energy. This is the It follows from this law that if a mechanical system neither receives energy from nor communicates energy to any external agency, and if there is no conversion of energy within the system into non-mechanical forms, then the sum of the kinetic and potential energies of all its particles will remain constant. This is the content of equation (3.56). If energy is lost from the system, as, for example, when friction is present and heat is generated, it will prove impossible to define a PE function and the energy equation, in the form (3.56) , is no longer applicable.
Law of Conservation of Energy.
3]
R E S O L U T E S O F A C C E L E R AT I O N
73
3.5. Tangential and Normal Components. Motion on Wires
If a particle is in motion in a plane, by resolving the resultant force acting upon it and its acceleration vector in the direction of motion, equation (3.49) is obtained. It will frequently be convenient to replace this equation by the equation of work (3.51) or the equation of energy (3.56). Resolution in the direction of the normal to the path yields a second equation, viz.,
2 mv - = F sm e -
•
p
(3.57)
being the radius of curvature of the trajectory. These equations are particularly appropriate when we are presented with the problem of the motion of a bead on a smooth plane wire of specified shape and under the action of given applied forces (e.g., gravity) . The only unknown force involved is the reaction of the wire upon the bead and, since the wire is smooth, the direction of this force will always be that of the normal to the wire. This unknown reaction will have no resolute in the tangential direction, and hence will not appear in the tangential equation of motion or in the equations of work or energy. Any one of these latter equations will therefore be sufficient to determine the motion of the bead. The normal equation of motion will involve the unknown reaction and is accordingly employed to calculate this force when the motion has been established. As an example, consider the motion of a bead on a smooth vertical circular wire of radius a. The bead is acted upon by two forces : (i) its weight mg, and (ii) the reaction R of the wire acting along a radius. At any instant, let e be the angle made by the radius 0 P through the bead with the down ward vertical (Fig. 3.8). Taking D, on the same level as the centre of the wire, as the datum point, the work which will be done by the forces acting on the bead if it is FIG. 3.8.-Motion of a Bead on a moved from P to D is -mga cos e, Vertical Circular Wire R doing no work, since its direction is everywhere perpendicular to the direction of motion. If v is the speed of the bead at any instant, its total energy is fmv2 - mga cos e. The energy equation is therefore p
or
tmv2 - mga cos e = constant, v2 = constant + 2ga cos e .
(3.58)
74
A C O U R S E I N A P PLI E D M A T H EMAT I C S
[CH.
Suppose that the bead is projected from the lowest point of the wire with velocity V Then, when e = 0, v = V and, by substitution of these values in equation (3.58), we find that the constant is V2 - 2ga. Hence, in this case,
(3.59) v2 = V2 - 2ga(1 - cos e). It is clear from equation (3.59) that, as e increases, v2 decreases, as we should expect. When e = v2 takes its minimum value given by v2 = V2 - 4ga. (3.60) v will only be real, and this value of e can be attained only if V2 ;;,: 4ga. If V2 > 4ga, the bead will arrive at the topmost point of the wire with a non-zero velocity and will describe a complete circle, returning to the lowest point of the wire, where e = 2TC, with its initial velocity V. Complete circuits of the wire will now be made indefinitely. If V2 < 4ga, the bead cannot rise to the highest point and its velocity TC,
becomes zero when
e satisfies the equation cos e
V2 = 1 - 2ga
(3.61)
- ·
Having arrived at this point, the direction of its motion is reversed and it returns to the lowest point with speed V, after which it rises to the same height on the opposite side of the wire. The motion is oscillatory. The normal equation of motion is
2 -· - mg cos e = mv a Substituting for v2 from equation (3.59), we find that mV2 + mg(3 cos e - 2). R= a R
-
(3.62) (3.63)
an equation which determines R at all points on the particle's path. The motion of a particle which is connected to a fixed point 0 by an inextensible string of length a and which is free to move in a vertical plane through 0 may be discussed in a similar fashion. R is now re placed by the tension T in the string. T cannot take negative values (unless the string is replaced by a light rigid wire) and hence, if the particle is to be able to describe complete circles, must be positive for all values of e. Equation (3.63) indicates that T will take its mini mum value when e = 1t, and that then
T
2 T = mV a - 5mg.
(3.64)
3]
RESOLUTE S O F ACCELERATION
75
This must be positive, and thus V2 � 5ga. This condition is stronger than the condition V2 > 4ga, under which a bead can complete the circuit of a vertical circle and therefore includes it. Referring to Fig. 3.8, we see that the tangential equation of motion is
m dv dt = -mg sm e. .
Since
v ae, this equation is equivalent to e + !I sin e = 0. a
(3.65)
=
(3.66)
If the particle is making small swings in the vertical plane, e will remain small throughout the motion and we may replace sin e by e to obtain
(3.67) as an approximate equation of motion. We deduce that the mode of oscillation of e is simple harmonic, with period given by
T 2rrJf =
(3.68)
A more complex problem which may be attacked successfully by resolving along the tangent and normal to the path is that of the motion
FIG. 3.9.-Resisted Motion under Gravity
of a projectile in a vertical plane under gravity and air resistance proportional to the square of the speed. If m is the mass of the pro jectile P and v is its speed at time t, let mkv2 be the air resistance (Fig. 3.9). Taking axes Ox, Oy through the point of projection 0, let ifl be the angle made by the tangent to the trajectory at P with Ox.
[CR.
A C O U R S E I N A P PLI E D MATH E MAT I C S
76
}
Resolving along the tangent and normal at P, we obtain the equations of motion.
mv �� = -mg sin !f; - mkv 2 (3.69) mKv2 = mg cos lj;, where s is measured along the trajectory from 0 and K is the curvature. The path being concave downwards, dlf;fds is negative and, since is always taken to be positive, K = - d!f;jds. Equations (3.69) are there
;s (tv2) = sin lj; - kv2 v2 �� = -g cos lj;.
fore equivalent to
-g
K
}
(3.70)
Dividing the first of these equations by the second and putting
v2 = u, we obtain
l du k 2u dlj; = tan !f; + g u sec lj;.
(3.71)
This equation can be linearised by substituting w =
dw + 2w tan !f; = -g 2k sec lj;. dlj;
lfu to yield (3.72)
The integrating factor is found to be sec2 lj;. Multiplying both sides of the equation by this factor, we can then write it in the form
d 2k 3 do/ (w sec2 lj;) = -g sec lj;.
(3.73)
An integration with respect to !f; now gives
w sec2 !f; = -gk- [log(sec !f; + tan lj;) + sec !f; tan lj;] + constant. (3.74) If V is the velocity of projection at an angle to Ox, then, when !f; = w = lfVZ. Substituting these values for w and !f; in equation (3.74), we calculate that sec2 k constant = +- [log(sec + tan ) + sec tan ] oc
oc,
oc
g
- � - g log
(sec sec
�
and hence that sec2 !f; sec2 oc �
_
k[
oc
oc
)
oc
oc
oc ,
+ tan oc + sec oc tan oc - sec lj; tan lj;l . + o/ tan o/ J
v2
(3.75)
Equation (3.75) determines in terms of the angle lj;. If this expression for v2 be substituted in the second of equations (3.70),
3]
R E S O L U T E S OF A C C E L E R AT I O N
77
dsjdif; may be calculated as a function of if;, and then an integration with respect to if; expresses s as a function of this angle. This is the intrinsic equation of the trajectory. The integration cannot be per formed analytically, but may be treated by numerical methods. =
A fine smooth cycloidal tube, whose intrinsic equation is s 4a sin .p, is fixed in a vertical plane with its vertex uppermost. Two equal particles, each of mass m, are connected by a light inextensible string of length 2a and are placed inside the tube so that the upper particle is at the vertex and the string is fully extended inside the tube. If the upper particle is released, show that the tension of the string remains constant at t;mg, and that the time which elapses before the lower particle reaches a cusp is 2 (i) t cosh-1 3. (L.U.) Let T be the tension in the string. This force acts on each particle along a
Example 5.
tangent to the cycloid as shown in the diagram. Let R 1, R 2 be the reactions of the tube on the particles. These forces are normal to the cycloid, since the tube is smooth. At time after the motion commences, suppose the particles are at and Let rfov be the angles made by the tangents to the cycloid at and with the tangent at the vertex 0. Then, if and are the lengths of the arcs = sin = sin (i)
s2
P P
t Q. r/12 Q OP, OQ, s1 4a r/11, s 2 4a rp2 .
s1
}
Resolving along the tangent to each particle's path, we obtain the equations of motion (tv ) sin r/J 1 (ii) sin
T + mg = md�1 2 , mg r/12 - T = mdds,(!v2),
where i s the common speed o f the particles. But = + and hence, = The right-hand sides of the equations (ii) are therefore equal, implying that sin r/11 sin = ! sin sin
v s 2 s1 2a
ds2 ds1. T + mg = mg r/12 - T, T mg( rp2 - rp 1) = ?a,cs. - sl) (by (i)) t;mg. =
A C O U R S E I N A P P L I E D M A T H E MA T I C S
78
[cR.
Addition of equations (ii) yields =
1{11 + sin 1{12) 2dds1 (!v2) g d ds1 (v2) 4a (s1 + s2) = 2ff...a(s1 + a). Integrating with respect to s1, we obtain (iii) v2 = fa(s12 + 2as1), since v = 0 when s1 = 0. Since v = ds1fdt, equation (iii) may be written in the form .!!._ )t 1 . (iv) ds1 = 2 (�g · v' s12 + 2as1 When the lower particle is at a cusp, 1{1 = trr and hence s = 4a. Thus, s1 = 2a. Integrating equation (iv) with2 respect to s1 over2 the interval (0, 2a) we therefore obtain the time required, viz., 2 (i) t I cosh-1 s1 t a I :· = 2 (i) t cosh-1 3. Example 6. A bead slides on a rough circular vertical wire. Starting from rest at the level of the centre, it comes to rest again at the lowest point. If fL is the co efficient offriction, show that (M.T.) Let A, B be the initial and final positions of the bead and let P be its position at time t. Let a be the radius of the wire and LAOP = e. If R g (sin
=
,
is the normal component of the reaction of the wire, fLR is the frictional
8
component in the direction of the tangent. If is the mass of the bead and s is the arc the tangential and normal equations of motion are
AP,
m mg cos e -J.
R E S O L U T E S O F A C C E L E RATI O N
3]
79
Eliminating R between these equations, we find that
�� + 2J.LU
=
2ag(cos 6
-
J.L sin
6} ,
where u = v2. This is a linear equation having CF Ae-2�-'o. A PI is found thus : l iJ.L) eiO 3J.L cos 6 + (1 2J.L2) sin a. /?4 ___ (eiO + iJ.LeiO) = !?4 i!_j2J.L + i = 4J.L2 + I D + 2J.L The general solution is accordingly -
When e =
Hence
0,
u_ - v2 _ - A e_2�'0 + 3J.L cos a + (I - 2J.L2} sin e . 4J.L2 + I v = 0 and consequently 3J.L 0=A + 4J.L2 + t' v2 - 3J.L cos _
a + (I - 2J.L2) sin 6 - 31-Le-2�'0 4J.L2 + I
When a = t7T, v is zero again.
0
•
It follows that
I - 2J.L2 - 3J.Le-J.L" = , 4J.L• + I
and this is equivalent to the result stated in the question.
EXERCISE 3
1 . A projectile is launched with velocity V, and moves in vacuo under the action of a constant gravitational force. Show that its Littlewood coordinates at time t after projection are � = Vt and 'Y) = !gt2• 2. A projectile is fired from a point 0 on an inclined plane with velocity V. The plane of its motion intersects the inclined plane in a line making an angle � with the horizontal. Taking this line as x-axis, the positive direction being up the plane, and Oy in the plane of motion and perpendicular to Ox in the upwards direction, write down the equations of motion of the projectile. Hence prove that the range R of the projectile on the sloping plane is given by 2 V2 sin (tX - �) cos tX sec2 �. R = g where tX is the angle made by the velocity of projection with the horizontal. 3. Employing the notation introduced in the text, show that for variable angle of projection and constant velocity of projection the locus of the focus of parabolic motion under gravity is the circle x2 + y2 = a2, where a = V2f2g. Show also that the locus of the vertex is the ellipse x2 + 4y2 = 4ay. -
80
A COURSE I N APPLIED MATHEMATICS
[CH.
4. 0, A and B are three collinear points on a piece of ground which is horizontal, and A lies between 0 and B. A vertical wall of height 2h is erected at A , and a parallel vertical wall is erected at B, both walls being perpendicular to the line OAB. A particle is projected from 0 under constant gravity in a vertical plane through the line OAB. It just clears the wall at A and strikes the wall at B at a height h above the ground. If OA = 2d, AB = d, prove that the particle was projected at an angle tan-1(7h/3d) to the horizontal. (L.U.) 5. Any number of particles are projected from the same point at the same instant and fall under uniform gravity. Prove that : (i) at any sub sequent instant the directions of their velocities are concurrent ; (ii) the point of concurrence rises with constant acceleration. (L.U.) 6. A particle is projected with given velocity up a line of greatest slope on a finite smooth plane inclined at a fixed angle to the horizontal. After passing the top edge of the plane, the particle describes a para bola under gravity. If the point of projection remains fixed whilst the length up the plane is varied, prove that the locus of the focus of the parabola is a straight line. (L.U.) 7. An aeroplane is travelling with constant speed v round a horizontal circle ABC of radius a at a height h above the ground. An anti aircraft gun is situated on the ground at a point 0 vertically beneath the centre of the circle A BC. The gun is fired when the aeroplane is seen in the direction OA , and the shell just hits the aeroplane when it is at the point B. If the muzzle velocity of the gun is 3(hg) l, prove that a = (3y7)h, and that the length of the arc AB is 4v(hfg) i. (L.U.) 8. A particle of mass m moves in a vertical plane in a medium whose resistance is [Lm times the velocity. Show that the resultant accelera tion is in a fixed direction and that the vertical distance of the particle from a line through the point of projection parallel to the direction of the resultant acceleration is gtj[L. (L.U.) 9. An aeroplane is flying with uniform speed v in an arc of a vertical circle of radius a, whose centre is at a height h vertically above a point 0 of the ground. If a bomb is dropped from the aeroplane when at a height Y and strikes the ground at 0, show that Y satisfies the equation k ¥2 + Y(a2 - 2hk) + k (h2 - a2) = 0, (L.U.)
10. A particle of unit mass is projected with a velocity whose horizontal and vertical components are (u, v) in a medium in which the resistance is k times the velocity. Show that when the horizontal distance traversed is uf2k, the particle is at a height v g (log 2 !) 2k
-
above the point of projection.
k2
-
(M.T.)
3]
RESOLUTES OF ACCELERATI ON
81
1 1 . A thin smooth wire is bent into the shape of a parabola of latus rectum 4a and is fixed in a vertical plane with its vertex A downwards and its axis inclined at an angle 6( < !7t) to the vertical. A heavy bead of mass m can slide on the wire and is released from rest at the point B where the vertical through the vertex intersects the wire again. Find the speed of the bead when it reaches the vertex and prove that the reaction of the wire on the bead is then mg cos 6(1 + 4 cosec2 6). (L.U.)
12. A smooth wire bent into the form of a catenary of parameter c is fixed with its axis vertical and vertex upwards. A smooth bead which is threaded on the wire is projected from the vertex along the wire with velocity y'(2gc). Prove that, when the bead reaches the point at a depth h below the vertex, it has a velocity y2g(h + c) and find the reaction of the wire on the bead at this instant. (L.U.) 13. A smooth wire bent into the form of a parabola is fixed with its axis vertical and its vertex downwards. A particle of mass m oscillates on the wire coming to rest at the extremities of the latus rectum. Show that the pressure of the particle on the wire when passing the vertex is 2mg. (L.U.) 14. A smooth tube is in the shape of the catenary y = c cosh xfc and is fixed in a vertical plane with its vertex downwards and axis of sym metry vertical. A particle of mass m moves in the tube under the action of gravity and of an attractive force towards the x-axis equal to mgfc times its distance from it. If the speed of the particle at the vertex is (4gc)l, show that it will come to instantaneous rest at points distant (2y'2 - 1)c from the x-axis. Find also the reaction of the tube on the particle at the vertex. (L.U.) 15. Two particles, P, Q, each of mass m, are joined by a light inextensible string. The particle P is held at rest at a point on the highest generator of a smooth circular cylinder, of radius a, having its axis horizontal. The particle Q hangs freely (the length of the string being greater than a1tj2) and lies in the vertical plane through P at right angles to the axis of the cylinder. If P is now released, show that it will leave the surface of the cylinder when the radius through P makes with the vertical an angle oc, where oc is given by the equation 2 cos cc = (1 + cc) . Show also that the tension in the string at the instant when P leaves the surface is tmg(1 - sin cc) . (L.U.)
16. An elastic spring of small cross-section, natural length 1taf2 and modulus of elasticity 1tmgy'2 lies inside the upper half of a smooth, hollow tube which has been bent into the shape of a circle with centre 0 and radius a, and fixed with its plane vertical. The spring carries particles of mass m at its ends A , B. If the spring has its natural length initially and A , B occupy symmetrical positions, show that if the
82
[CH.
A C O U R S E I N A P PLI E D M A T H E M A T I C S
particles are released from rest, the maximum value 2y of the angle AOB is given by 1 - y2 cos y = (2y - rt/2) 2. Show that, if the system is symmetrically disturbed from its equili brium position, it will perform simple harmonic oscillations of period T given by gP ( 4y2 - cos ct) = 4rt2a, where 2ct is the equilibrium value of the angle AOB. (L.U.) 17. A smooth wire bent into the form of a catenary s = c tan is fixed with its plane horizontal. A small ring of mass m can slide on the wire and is attracted towards the directrix with a force proportional to its distance from the directrix. Show that the motion of the ring is simple harmonic and that the normal reaction varies inversely as the square of the distance from the directrix. (L.U.) 18. A smooth particle is projected along the inside of a vertical circle whose centre is 0 and radius is a. The particle leaves the circle at the point P on the upper half and meets it again at the point Q ; the point R is the highest point of its trajectory. Show that the time from P to R is (a sin 6/g) t cos 6 and that the time from P to Q is four times this, 6 being the angle between the horizontal and OP. (L.U.) 19. A particle is suspended from a fixed point A by a string of length l. Find the velocity with which it must be projected horizontally from its lowest position if it is to strike A . 2 0 A small ring can slide o n a thin smooth wire which is in the form of a circle of radius a. The wire is fixed in a vertical plane, the ring being attached to the lowest point of the wire by a light elastic string of natural length a and modulus equal to the weight of the ring. The ring is projected from the highest point of the wire with speed (!ga) t . Find its speed when it reaches the lowest point. Show that the re action of the wire on the ring at first acts outwards and begins to act inwards when the string has turned through an angle cos-1 ( 1 1/12) . (L.U.) 21. A particle P of mass m moves on a smooth horizontal plane and is attracted to a fixed point 0 in the plane by a force !J.m OP, where !J. is a constant. A fixed smooth vertical wall is erected on the plane at a perpendicular distance a from 0. The particle is projected from 0 with speed (2!J.} ta cosec ct and strikes the wall at an acute angle ct. If the coefficient of restitution at the impact is e, prove that, at time t after the impact, x = a( cos !J.lt - e sin !J.lt), y = a cot ct (cos !J.tt + sin !J.lt) , where the origin is at 0 and the x-axis is perpendicular to the wall. (L.U.)
.p
•
22. Two particles of unit mass P and Q perform coplanar elliptic harmonic motions of equal period 2rt/n, about a centre of force 0. Initially, 0, P and Q are collinear, OP = a, OQ = 2a and P and Q are moving
RESOLUTES OF ACCELERATION
3]
83
in the same sense perpendicularly to the line OPQ with speeds v and J..v respectively. Prove that the path of P relative to Q is an ellipse described in time 2rr:fn and show that this path becomes a circle if J.. = 1 ± nafv. (L.U.) 23. A particle P, of mass m, is attracted towards the origin 0 of rectangular coordinates x, y by a force mn20P. Initially, the particle is projected from the point (a, 0) with velocity u parallel to the axis of y. Prove that the particle describes the ellipse (x;a) 2 + (nyfu) 2 I, and that the eccentric angle o f P o n the ellipse increases at a constant rate. Show that the hodograph of the motion is an ellipse which is similar to the orbit. (L.U.) 24. Two particles P and Q are both attracted to a fixed point 0 of their plane of motion by a force fLY per unit mass, where r is the distance from 0. They are projected simultaneously from a point A , at a distance a from 0, in a direction at right angles to OA . If the initial velocity of P is byfl. (where b < a) and that of Q is ayfL, show that as P describes its elliptical orbit, Q will describe the auxiliary circle in such a manner that PQ is always perpendicular to OA . (L.U.) 25. A bead slides on a smooth wire which is bent to a circle and fixed with its plane horizontal. The circumference is divided into n equal parts by points A 1, A 2, A n - The bead, when at any point B of the wire, is simultaneously attracted to these points by forces whose magnitudes kA nE, where k is a constant, acting along the are kA 1B, kA 2B, chords BA 1, BA 2 , BA n respectively. Prove that the bead moves round the circle with constant speed. (L.U.) 26. A particle is attached to the end of a light inextensible string and hangs at rest with the upper end of the string attached to a point on the upper half of a fixed horizontal circular cylinder of radius a, so that the straight part of the string is of length arr: and is a vertical tangent to the cylinder. The particle is projected horizontally with velocity V at right angles to the axis of the cylinder so that the string begins to wrap round the cylinder. Show that the tension in the string, when the length of the straight part is acfo, is given by Tacfofm = V2 + ga(2 sin cfo 3cfo cos cfo 2rr:) . Hence show that if the string becomes slack when cfo = �. then � � �. where � is the acute angle given by cot � = 3�. (M.T.) 27. A bead whose weight is negligible by comparison with the other forces acting on it is set in motion with velocity V round a fixed rough horizontal circular wire of radius a on which it is threaded. Show that the angular distance 8 travelled by the bead after time is fL log + where fL is the coefficient of friction between the bead =
-
�
(I
:t),
-
t
and the wire. (B.D.) 28. A projectile moves under the action of gravity and of an air resistance proportional to the nth power of the speed. If the velocity of the
84
A COURSE I N APPLIED MATHEMATICS
[cH. 3]
projectile at any time is inclined at an angle .p above the horizontal and has a horizontal component u, prove that n u
1
=
1 -n n
n Uo
w
1"' o
secn+l.pd.p'
where u, is the speed at the highest point of the trajectory and w is the speed at which the magnitude of the resistance equals the weight of the projectile. (Li.U.) 29. The normal cross-section of a cylindrical surface is a complete arch of a cycloid with vertex uppermost whose intrinsic equation is s = 4a sin .p. The surface of the cylinder is smooth, and it is held fixed with its cusps resting on a horizontal plane. A particle is projected from a point on top of the cycloidal surface on the highest generator, the direction of projection being along the tangent to the normal cross-section through the point of projection. Show that, if the speed of projection is y(2ag), the speed of the particle while still in contact with the surface is y{2ag(1 + 2 sin2 .P)} and that the particle will leave the surface when it has descended a vertical distance ta. (Le.U.) 30. A smooth curve in the form of the parabola y2 = 4ax is fixed in a vertical plane with the x-axis horizontal. A particle on the concave side is projected vertically upwards from the vertex with velocity y(2gh) . Show that it will leave the surface at a point P whose y coordinate, Yv is a root of the equation ya + 12a2y - 8a2h = 0. Show also that the horizontal velocity component at P is (gy13f4a2) ! and deduce that the greatest height of the particle in the subsequent free motion is 3y1/2. (S.U.) 31. A smooth tube, in the form of the catenary y = c cosh xfc, is fixed in a horizontal plane. A particle of unit mass slides in the tube and is attracted to the x-axis by a force equal to k times its distance from it. Show that the motion is simple harmonic. If the speed of the particle at the vertex of the curve is cyk, show that the reaction of the tube is then 2kc. (S.U.)
CHAPTER 4
POLAR RESOLUTES OF ACCELERATION
4.1. Central Forces In this chapter we shall study a class of problems which receive their solution by resolving the equation of motion along and perpendicular to the line j oining the position P of the particle at any instant to a fixed origin 0, in the plane of motion. We shall denote 0 P by and the angle made by OP with a fixed reference line Ox in the plane of motion by 6. Thus 6) are polar coordinates of P. The polar resolutes of the acceleration of P have been given at (1 .20). If (Fr. F0) are the corresponding resolutes of the resultant force acting on the particle, then the equations of motion are
r
(r,
m(r - rfl2)
=
� :e (r28) = Fo.
Fr,
(4.1)
In the special case when the resultant force acting on the particle is always directed along PO and is of magnitudef per unit mass (Fig. 4.1)
FIG. 4.1.-A Central Force
these equations of motion reduce to
-J, it (r2(l) 0. (4.2) Such a force is termed a central force and, in general, it will be variable in magnitude, being dependent upon the particle's position relative to 0 and Ox. Thus f will be a function of r and 6. We shall only be concerned with the case when f is a function of r, this being the case r - r(l2
=
=
which more often arises in practice.
85
A C O U R S E IN A P P L I E D M A T H E M A T I C S
86
[cH.
From the second of equations (4.2), we deduce that (4.3) r26 = h (a constant) . If A is the area of the plane of motion which has been swept out by the radius OP since the instant t = 0, the area swept out as e increases to e + de and the particle moves to P' (Fig. 4.1) is the sector OPP' and may be denoted by dA. To the first order of small quantities, we have dA = !r2de, and hence, dividing by dt, we obtain (4.4) A = tr26 = fh. h may therefore be interpreted as twice the rate of description of area by the radius 0 P, and we have proved that this rate is a constant if the force is of the central type. An alternative physical interpretation of h, which we shall find useful in the sequel, may be derived as follows : If v is the velocity vector of P and p = ON is the perpendicular from 0 on to the line of motion of P (Fig. 4.2) the moment of the velocity about 0 is
pv = r sin {> v .
=
r
.
v sin {> = r . r6
=
r26 = h,
(4.5)
;.
r
0
!
- -p -
---
I I I I
I
I
I
I
- cf
FIG. 4.2.-Moment of the Velocity
where {> is the angle indicated in the figure. h accordingly represents the moment of the velocity about the centre of force. Putting = equation (4.3) implies that
r lju,
Hence
(4.6)
r. = u2l dudt = u2l dude dedt = h dude · -
-
-
(4.7)
POLAR RESOLUTES O F ACCELERATION
4]
(
h de ) - de ( - h de )dt - - h d62 6. - - h2u2 dd62u2 ·
Differentiating again with respect to t, we obtain .. d d2u du de du d _
r - di
-
_
_
_
87
(4.8)
It now follows from equations (4.6) and (4.8) that r -
y(l2 - h2u2 �:� - h2u3 . =
(4.9)
(4.10) h2u2 ( ddf)2u2 + u ) -- j. Given I as a function of r, and therefore of u, equation (4.10) is a differential equation determining u as a function of 6. This latter
The first of equations (4.2) can therefore be written in the form
equation is the polar equation of the trajectory of the particle. A trajectory described under a central force is usually referred to as an orbit. Alternatively, if the orbit is known from observation of the motion of the particle, u will be specified as a function of 6, and equation (4.10) then permits a calculation of the manner of variation of I with the particle's position in space. This latter application is the simpler and we shall illustrate it first.
A planet is observed to describe an elliptical orbit with the sun at a focus. Show that this is consistent with the assumption that the sun is attracting the planet with a central force varying as the inverse square of the distance between the two bodies.
Example 1.
The sun being a massive body compared with a planet, its motion is little influenced by the latter. We shall accordingly take the sun to be at rest at the origin 0. The correction necessary to allow for this erroneous assump tion will be discussed in Section 8.3. The polar equation of the planet's orbit may be taken in the form r=
=
l lu 1 + e cos a, . (4.11) where l is the semi-latus rectum and e the eccentricity of the ellipse. Differentiating equation (4.11) twice with respect to a, we find that (4.12) ldda•2u e cos a. Substituting from equations (4.11) and (4.12) into equation (4.10}, we deduce that f - h•u· (-!.1 cos v + 1 + el cos a ) - �1 . u2. (4. 1 3) Thus f u2 1/r2, and the result is proved. A point on an orbit at which the particle is moving at right angles to the radius vector is called an apse. At such a point r = 0 and hence r is a maximum or a minimum. Also, at an apse, dr r.16. 0 du = I dr = 0 (4.14) de -� de · de = -
oo
0
=
=
=
'
[cH.
A C O U R S E IN A P P L I E D M A T H E M A T I CS
88
The distance of an apse from the centre of force is termed an apsidal
distance.
4.2. Inverse Square Law Physical attractions between particles are almost invariably governed by an inverse square law. Thus, gravitational, electrostatic and mag netic attractions all conform to this law, i.e., the force of such an attrac tion is inversely proportional to the square of the distance between the attracting particles. It is therefore of practical importance to investigate the type of motion which will be executed by a particle under the attraction of another when the latter is fixed in position and the attraction is according to the inverse square law. Taking the position of the fixed particle to be 0, let f1./r2 = fLU2 be the attraction per unit mass on the moving particle. Equation (4.10) shows that the orbit is governed by the equation (4.15) This is a linear equation of the second order having characteristic roots ±i and CF = A cos 6 + B sin 6 = C cos (6 - ex) , where C and ex are arbitrary constants. A PI is found by inspection to be f1./h2 • The general solution is therefore u =
x2 + c cos (6 - ex) .
(4.16)
C and ex will depend upon the initial circumstances of projection of the particle. Suppose C and have been determined in some particular case. Without loss of generality, C can be restricted to be positive, ex
for if C is originally negative, C cos (6 ex) = -C cos (6 - ex n-) = -C cos (6 ex ') , where ex ' = ex + n-, and -C is positive. Let Ox' make an angle ex with Ox in the sense indicated in the diagram. If 6' is the angle made by OP with Ox', then 6' = 6 - ex and equation (4.16) is equivalent to -
-
u=
�+
c
cos 6'.
-
4]
P O L A R R E S O L U T E S O F A C C E L E RA T I O N
89
If, therefore, we replace the reference line Ox by Ox', and measure 6 from Ox', the equation of the orbit will be
� + C cos 6
u= or
l = 1 + e cos 6,
(4.17)
h2 l = -,
(4.18)
e = Ch2/[.L.
(4.19)
r
-
where
[.1.
and
Equation (4. 17) is the equation of the orbit and contains one inte gration constant e, which is positive. It is well known to represent a
0
e<
I
0
I?> I
E L L I Ps E
HYPERBOLA
0
FIG. 4.3.-Types of Conic Orbit
conic with focus at 0 , of semi-latus rectum l and eccentricity e. If e < 1, the orbit is an ellipse. If e = 1 the orbit is a parabola. If e > 1 the orbit is a hyperbola. The three types of orbit are illustrated in Fig. 4.3, from which it will be noted that the reference line is the axis of each conic. Equation (4.18) shows that l is determined immediately the moment of the velocity about the centre of force can be calculated.
[cH.
A C O U R S E I N A P P L I E D M A T H E M AT I C S
90
Since r2e =
h, the transverse resolute of the particle's velocity is . h J� (1 + e COS (4.20) Ve
= r8 = r =
l
8) ,
use having been made of equations (4.17) and (4.18) . Also, differentiating equation (4. 17) with respect to
· 1.e.,
Vr
=
· a r· = el sm
y_!_2 r = -e sin ee' heT sm = J!/V: sm r2e =
t, we obtain
_
v .
·
·
a v
·
a v, .
(4 . 21)
an equation which determines the radial component of velocity in the orbit.
"'---
It
e
sin e
FIG. 4.4.-Components of the Velocity Vector
Equations (4.20), (4.21) indicate that v may be regarded as the sum
J�e sin e along OP ; (ii) J�e cos e per pendicular to OP, and (iii) J� of three vectors : (i)
in the same direction. The vector sum of the vectors (i) and (ii) is the vector w (Fig. 4.4), which is of magnitude
FrG. 4.5.-Hodograph of the Orbital Motion
J�e and whose
direction makes an angle 8 with the perpendicular to OP. w is accordingly perpendicular to Ox. v can therefore be resolved into
4]
P O L A R R E S O L U T E S OF A C C E L E R A T I O N
two components o f constant magnitude, viz., direction and
91
J� in the transverse
J�e in a direction perpendicular to the conic axis.
This
resolution is shown in a velocity diagram in Fig. 4.5. As the motion proceeds, the vector CG remains fixed in magnitude and direction and the vector GQ rotates about G, maintaining its magnitude constant. Q therefore traces out a circle having centre G. This circle is the hodograph of the motion. If < 1 the orbit is an ellipse and the hodograph encloses the point C. If > 1 the orbit is a hyperbola and the hodograph excludes C.
e e
A particle is projected from infinity with velocity V so as to pass a fixed point at a distance c if undisturbed. If it is attracted to the fixed point with acceleration l-'fr2, where r is the radius vector, find its orbit and show that its line of motion is deflected through an angle 21X, where v p tan IX = .!:._. v•c The initial moment of the velocity is Vc. Hence h = Vc and the semi-latus rectum of the hyperbolic orbit is l = v•c•fl-'· Taking Ox, the axis of the hyperbola, as reference line, initially when the particle is at infinity r = r = - V and e = -LxOZ = -{3, OZ being the line through 0 parallel
Example 2.
:z
oo,
to the initial line of motion. Substituting these initial values into equations (4.17) and (4.21), we find that 0 = 1 + o cos f3 -V = -
�e
- -frc sin {3.
sin {3 =
This pair of equations determines and {3. Thus
e V• e• - 1-'"c_2 + 1' tan f3 = v•c _
_
- -·
1-'
The equation of the orbit is accordingly
+ ( v;�· + 1 ) t cos e 1 1-' cos e �-<" i r = v•c• + -c- ( 1 + v•c• ) . When the particle arrives on the axis Ox it is moving in the direction of the perpendicular to this line. Its line of motion has accordingly been rotated through the angle NOx = IX. But LNOx = {3 - !1r and hence tan IX = -cot {3 = L . v•c
�
=
1
The hyperbola being symmetrical about its axis, the particle will experience a further deflection of its line of motion through an angle IX as it recedes to infinity. The total deflection is therefore 2cx.
A COURSE I N APPLIED MATHEMATICS
92
[CH.
4.3. The Energy Equatio-n
Consider a particle P of mass m acted upon by an attractive force f(r) per unit mass directed towards a fixed point where OP = r (Fig. 4.6). If the particle is taken from a point A , such that OA = r,
0, 0
FIG. 4.6.-Work Done by a Central Force
to a point D, where r = d, the work which is done by the attractive force is -
D J A
mf(r) cos > ds
=
-m
D J
dr f(r) - ds = -m dS A
J
d
r
f(r)dr,
(4.22)
where s is arc length measured along the path from A and > is the angle between OP and the tangent to the path. It is clear from equation (4.22) that this work depends only upon the form of the function f(r) and not upon the shape of the path between A and D. Taking D as the datum point, the PE of the particle at A is therefore given by v = -m
r r
f(r)dr
=
m
fd
f(r)dr.
(4.23)
We can now write down the energy equation of the motion of P under the influence of the attraction. If v represents the speed of the particle when it is distant r from 0, then tmv2
or
+ m [ f(r)dr = constant,
v 2 = constant - 2
J: j
f(r)dr
= constant - 2 f(r)dr,
(4.24)
absorbing the contribution of the lower limit to the integral in the constant.
4]
POLAR RESOLUTES O F ACCELERATI ON
93
In the particular case of the inverse square law of attraction,
f(r) = fL/r2 and equation (4.24) leads to v2 = constant + � r
(4.25)
To be able to calculate the constant we must know the speed at one point on the path. Suppose that the particle moves in an ellipse of eccentricity e, semi-latus rectum l and semi-major axis a. When it is at the apse nearer to the centre of attraction, putting 8 = 0 in equation (4.20), we find that
(4.26) At this instant r = lj(l + e) (equation (4.17)). Substituting this pair of corresponding values of v and r in equation (4.25), we obtain constant
= y (1 + e)2 - ¥ (1 + e) = -] (1 e2) (4.27) = - !:-a. -
The energy equation is accordingly
v2 = fL (� - D (ellipse). (4.28) In the case of parabolic motion, e = 1 and equation (4.27) indicates
that the constant is zero. Thus
v2 = �r (parabola) . In the case of hyperbolic motion, semi-axis of the orbit.
Hence
(4.29)
-y (1 - e2) = �' where a is the
v2 = fL a + D (hyperbola) . (4.30) The velocity from infinity V at any point in the vicinity of a centre of
attraction is defined to be the velocity which a particle would acquire in moving from a great distance to the point in question under the action of the force alone. The particle is assumed to be at rest initially, and hence v = 0 when r = <XJ . Equating the increase in the KE of the particle as it moves between r = <XJ and r = a to the work done by the central force, we obtain the equation
(4.31)
A C O U R S E I N A PPLI ED M A T H E M A T I C S
94
[CH.
r a. r a.
V being the particle's velocity at = This latter equation specifies the velocity from infinity at a point where = Clearly, this velocity exists only when is of such a form that the integral in equation converges. Suppose that a particle is projected from the point at which = with speed v0 in any direction. Let v be the speed at any later instant when the particle's distance from the centre of attraction is Equat ing the increase in KE to the work done by the central force, we obtain the equation
f(r)
(4.31)
r a
r.
!mv2 - !mv02 = -mff(r)dr.
(4.32)
This may be written in the form
v2 v02 =
-
or
"" 2[rf(r)dr = V02 2[ f(r)dr + 2j"" f(r)dr, (4.33) v2 = V02 - V2 + 2["" f(r)dr. -
a
a
r
V0 < V, the right-hand side of this equation will be negative when and hence v will be imaginary for this value of r. This implies that r cannot approach infinity and the particle will not recede in definitely from the centre of attraction. If, however, v0 � V, r can If
r
= �XJ,
tend to infinity and the particle will escape from the centre of attrac tion. The velocity from infinity is therefore the minimum
velocity.
f(r) tL/r2, V2tL/a
escape
V2[Lja
the particle will If = V= Thus, if V0 � escape to infinity along a hyperbolic or parabolic trajectory. If Vo < the particle will describe an ellipse and cannot escape from the centre of attraction. It will be proved in Chapter that a spherical distribution of matter such as the Earth attracts any external particle with a force varying inversely as the square of its distance from the Earth's centre. In c.g.s. 0 units, fL = X 10 2 • The escape velocity at a point on the Earth's surface, where = Earth's radius = x 108 em, is therefore A particle projected with this speed in V= = 11·2 kmjsec. any direction will, neglecting air resistance and providing its trajectory does not intersect the Earth's surface, recede to infinity along a para bolic or straight path.
V2[Lja.
14
3·991 a V2tL/a
6·379
A particle describes an ellipse of major axis 2a and eccentricity e under a force directed to a focus S. When the particle is at the end of the latus rectum through S, its velocity is suddenly turned through a right angle without change of magnitude. Prove that the particle will now describe 1an ellipse whose major axis is still of length 2a, but is inclined at an angle tan- (1 - e2)fe to the major axis of the original orbit. Find the eccentricity of the new orbit.
Example 3.
(L.U.)
4)
POLAR RESOLUTES O F ACCELERATION
95
Since the particle's speed and its distance from the centre of attraction are unaltered, it follows from equation (4.28) that there is no change in the value of i.e., the particle continues to describe an ellipse of major axis 2a.
a,
Let 5, 5' be the foci of the original orbit and let 5, 5" be the foci of the new orbit. Let L5 be a semi-latus rectum of the original orbit. The normal to the original orbit at L makes the same angle
+
a
tan L5"5N = L 5"5N =
a( - e2), ae,
- e•, e e" tan-1 c -;; ) . 1
This is the angle made by the new major axis with the old. Also 55"2 = 5N2 + N5"2 =
4a2e2 + 4a2 (1 - e2) 2 4a2(1 - e•2 ++ e') e•)t. 55" = 2a ( l - e But 55" = 2ae', where e' is the eccentricity of the new orbit. Hence e' = (1 - e• + e•)t. Example 4. An electron of mass m moves in an orbit under the action of a central attractive force Ze2fr2, where r is the radius vector. If the total energy of the electron is such that the velocity tends to zero as r tends to infinity, show that the sine of the angle which the radius vector makes with the direction of the tangent to the orbit is inversely proportional to yr. (B.D.) The total energy of the electron is !mv2 - Ze2fr, and, since v -+ 0 as r -+ the constant value of this quantity must be zero. Thus 2 v• 2Ze mr =
oo,
=
-- ·
A C O U RS E I N A P P L I E D M A T H E M AT I C S
96
[CH.
If cp is the angle between the radius vector and the tangent to the orbit, by equation (4.5) rv sin cp = h. sin cp
Hence
=
proving the result stated.
hfrv
=
�J�rl.
Equations (1.14) and (4.24) together imply that the energy equation for the motion of a particle under the action of a central force may be expressed in the form But r28
= h and hence
.yz
+
r2(l2 = g(r).
(4.34)
(4.35) r2 = g(r) - hr22 = G(r). Thus, if r is to be real, G(r) must take positive values. Suppose that G(r) is plotted against r as shown in Fig. 4.7. Then a range of r' •
G(t)
FIG. 4.7.-Graph of G(r)
possible values of r is from r = r1 to r = r2 • Suppose that initially r = ro within this range and that r is increasing. Then r is initially positive and r must continue to increase until r begins to take negative values. Before this can happen r must pass through the value zero. Hence r will increase until it reaches the value r2 at which r vanishes. r cannot then increase further, since to do so would result in G(r) becoming negative. Hence r becomes negative and r begins to de crease. r must persist in decreasing until it reaches the value r1
POLAR RESOLUTES OF ACCELERATION
4]
97
at which r = 0, and hence r can once again change sign. It follows that r will oscillate between the extreme values ri> r2 and the whole orbit will be contained between two circles of these radii.
An elastic string has one end fastened to a smooth horizontal table, the other end being attached to a particle. The string is stretched to twice its natural length and the particle is projected along the table at right angles to the string. Prove that in the subsequent motion the string will never attain its natural length if more than a quarter of the total energy is initially kinetic. If one-fifth of the total energy is initially kinetic and if at some instant the string attains its natural length, prove that it will remain slackfor a time �,Jrr;,_a, where m is the mass of the particle, a is the natural length of the string and i\ is the modulus of the string. (L.U.) Let V be the speed of projection and let r be the length of the string assumed taut, at time t. The initial length of the string is 2a, and hence the constant moment of the particle's velocity about the point on the table 0 to which the string is attached is 2aV. If (l is the angular velocity of the string at time t, we have the equation (i) r26 = 2aV The PE of the stretched string at time t is i\(r - a) 2f2a (equation 3.54). The KE of the particle at this instant is im(r2 + r2S2). It follows that the energy equation is !m(f2 + r2S2) + ia, 3mV2 • This latter inequality implies that !mV2 < ti\a,
Example 5.
i.e., initial KE < ! (initial PE) or less than one-quarter of the total energy is initially kinetic. If more than one-quarter is initially kinetic the string cannot attain its natural length. If one-fifth of the total energy is initially kinetic four-fifths is potential and hence = i.e., = Substituting this value of into equation (v), we find that when the string first goes slack,
V2
V2 i\af4m.
!m V" !(!i\a),
r
=
-H�r·
(vi)
the negative sign being taken, since the string is contracting. At this instant = (i), = The radial and
r = a, and hence, from equation E (I)
re 2V (i\afm)l.
98
[CH.
A C O U RS E IN A P P L I E D M A T H E M A T I C S
transverse velocity components of the particle are accordingly respectively, where The particle is now at the point P in the diagram and proceeds with constant velocity to the point Q, at which the string becomes taut again. If LOQP LOPQ then tan
( -!u, u)
u = (>.afm)l.
=
= cr.,
a
cr. = uf!u = 2.
a
The particle's constant speed will be cosec and the distance PQ is cos The time taken by the particle to move from P to Q is therefore sin cr. cos i 5 ---:.\
u
cr.
2a
cr..
= 4af5u = 4 (ma) Example 6. A particle P, of unit mass is attracted by a centre offorce at 0 according to the law w2r + w2a3fr2, where r = OP. If P is projected from a point distant a from 0 with velocity 4awfv'3 perpendicular to OP, show that sub sequently the distance of P from 0 varies between r = a and r = 2a, and find the velocity of P when r = 2a. (L.U.) Since f(r) = w2(r + a3fr2), the energy equation for the motion is v2 = constant - 2w2J (r + ::) dr = constant - w2 (r2 - 2:" ) When r = a, v = 4awfv'3 and hence the constant is l3a2w2/3. Thus ) v• = r• + r262 = w2 ( 313 a• - r• + 2a3 r . The initial moment of the velocity is 4a2w/v'3 and thus r•(J = 4a2w/y'3. Accordingly ) r• = w• ( 133 a• - r• + 2a3r - 16a' 3r2 w• (- 3r4 + l3a2r2 + 6a3r - 16a'). = 3r2 (i) The velocity of projection being in a direction perpendicular to the radius vector, we know that r = 0 when r = a. Hence (r - a) is a factor of the right-hand side of equation (i). By inspection, we also find that r = 2a is a zero of this expression and hence (r - 2a) is a factor. Dividing these factors out, it is easy to show that w• (r - a)(r - 2a)(3r• + 9ar + Sa•). r• = - 3r• But 3r2 + 9ar + Sa• = 3 ( r + ia ) + �a•, and hence is always positive. 2a
·
·
•
2
cr.fu
P O L A R R E S O L U T E S O F A C C E L E RATI O N
4]
99
The sign of f2 is accordingly determined by that of the expression This expression takes positive values only when Hence f is real for such values of only and the motion is confined between the circles = and = When = r = 0 and, since = = At such an instant, therefore, the particle is moving in the transverse direction with a speed
-(r - a)(r - 2a). a :::;;; r :::;;; 2a. r 2a, 2awfy3.
4.4. Time in
an
r r a 2 r 2a. r 6 4a2w/y3, rli 2awfy3.
Orbit
Having calculated the equation of the orbit of a particle, it may be required to find the time which elapses as the particle moves from one point on its path to another. If is the area swept out by the radius vector from the centre of attraction during the motion between these points, and if is the time of transit between the points, the constant rate of sweeping out of area is Thus
A
t
A ft. At = ih, or t 2A h =
(4.36)
.
In the case of an elliptical orbit described under the influence of an inverse square law of force per unit mass, let be the semi major and semi-minor axes respectively. The semi-latus rectum is and hence = Let be the time necessary to complete one circuit of the orbit. During this time the radius vector sweeps over the whole area of the ellipse and = Hence
f.'./r2
b2Ja,
h bv';{a.
a, b
T
A rr:ab. T 2rr:ab _ 2rr:at (4.37) T is called the periodic time in the orbit, and is here observed to be _
- -----;;- - f.'.!
.
proportional to the three halves power of the major axis of the orbit. A more difficult problem associated with this type of orbit is to calculate the time of the motion from the nearer apse to any other The problem is essentially that of point on the path (Fig. calculating the area of the sector of the elliptical path. Let be the point on the auxiliary circle such that is perpendicular to the major axis ', meeting it in N. If is the centre of the ellipse we shall denote the angle by If 0 represents the Sun and is any planet, is called the and then = e Each element of the sector such as YZ is the (or Y'Z'), is times the corresponding element XZ (or X'Z') of the area of the auxiliary circle. Hence
P
A
4.8).
AA
E real anomaly. bja OAQ b area OAP = a
OAP PQ C QCA E. eccentric anomaly
Q
OAP,
LPOA
OAQ ab (sector ACQ - t:.. OCQ) = � (ia2E - i;aOC sin E) a (4.38) = iab(E - e sin E). -
X
area
=
-
P
100
A C O U R S E IN A P PL I E D M A T H E M AT I C S
[CH.
We have already proved that h = If t is the time required for the radius vector to sweep over the sector OA P, equation (4.36) shows that
bv'fL/a.
;!_
t This is
Kepler's Equation.
a• (E - e sm. E) .
(4.39)
= --"1
fL"
FIG. 4.8.-Time in an Elliptical Orbit
E
t may be calculated from Kepler's equation only when has been determined. It is the real anomaly e which is usually available, however, and we therefore require a formula giving in terms of e. Now r cos e = ON = CN - CO = cos (4.40) Hence, employing equation (4.17), l cos e 1 + cos e = cos (1 e2)cos e cos or (4.41) l + cos e Putting 1 tan2 te ' cos E = 1 tan2 tE' cos e = 1 + tan2 te 1 + tan2 tE we find that
E a E - ae.
-
e e
_
-
-
tan
a( E - e), E e. -
!E R, tan te.
(4.42)
=
This equation is convenient for the calculation of
E.
P O L A R R E S O L U T E S O F A C C E L E RA T I O N
4]
101
A particle moves in an elliptical orbit of eccentricity e under the action of an inverse square law of force. If the major and minor axes are AA', BE' respectively, A being the apse nearer the centre offorce, show that the times taken to traverse the arcs B'AB, BA'B' are in the ratio 2e : + 2e. (L.U.) The ratio of the times of description of the arcs B'AB and BA'B' is the same as the ratio of the shaded area to the unshaded area in the diagram. If a, b are the semi-major and semi-minor axes respectively, shaded area = area semi-ellipse ABE' - area !'::,. OBB' = i1rab !BB' OC = !1rab - abe = !ab(1r - 2e).
Example 7.
1r -
1r
-
B
A
c
a'
Similarly, unshaded area = + The ratio of the areas is accordingly
!ab(1r 2e).
1r
(1r - 2e) : ( + 2e).
4.5. Kepler's Laws
Analysing the results of observation of the motions of the planets, Kepler came to the following conclusions :
(a) The planets describe ellipses with the Sun at a focus.
(b) The area swept out by the line joining the Sun to a planet is proportional to the time of its description. (c) The squares of the periodic times of the planets are pro portional to the cubes of their mean distances from the Sun.
Kepler's Laws.
These are With the aid of the analysis developed in this chapter we may deduce from each of these laws one important characteristic of the forces acting on the planets due to the Sun. Thus, taking the Sun as pole of polar coordinates 6) and employing the notation introduced in the first section of this chapter, the second = constant. This implies law is equivalent to the equation A =
(r,
that
�� (r28)
!r2B
=
0, and hence that the force acting on a planet has zero
[CH.
A COURSE I N APPLIED MATHEMATICS
102
transverse resolute, i.e., is directed along the line joining the planet to the Sun. The first law now implies that this force is one of attraction and has a magnitude varying inversely as the square of the distance between the planet and the Sun. The details of this deduction have been explained in Ex. l. Knowing that the force is o f the inverse square type, we can now derive equation (4.37) for the periodic time T in an orbit. Let Tv T2 be the periodic times of two planets moving in elliptical orbits having semi-major axes and respectively. Then, if and are the respective attractions per unit mass acting on these planets due to the Sun,
a1
f!.1/r2
a2
f!.2/r2
(4.43)
i.e.,
e1
a1 ae1) a1
If is the eccentricity of the orbit of major axis 2 v the least and greatest distances from the Sun in this orbit are (1 and (1 + respectively. The mean distance from the Sun is accordingly Similarly, is the mean distance of the second planet from the Sun. By the third law therefore, -
a2
T_12 = a___!_s_ . T22 azs
This equation, in conjunction with equation
e1) a1.
(4.44) (4.43),
implies that
= !-Lz· f!.1 The fundamental content of the third law is therefore that the attraction per unit mass due to the Sun at a distance r is of magnitude !-L/r2, being a constant for the solar system independent of the body !-L
being attracted. All of the above conclusions were summarized and generalized by Newton in his This states that
Law of Gravitational Attraction. any two particles attract one another with equal forces acting along the line joining them and that the magnitudes of these forces are proportional to the masses of the particles and inversely proportional to the square of the distance between them. The equality of the forces acting on the two particles is a consequence of Newton's third law of motion (p. 21). If m1, m2 are the masses of the particles and r is the distance between them the magnitude F of the force acting on either particle is given by the equation F = ymrl2m2, (4.45) where is a constant of proportionality known as the Gravitational Constant. In c.g.s. units, = 6·66 I0-8. It follows that if S is y
y
X
POLAR RESOLUTES OF ACCELERATION
4]
103
the mass of the Sun and P the mass of a planet, the force of attraction acting on the latter body when at a distance from the Sun is i.e., a force per unit mass of the planet. Thus, for this planet, flo = and flo is seen to be a constant for all the planets of the Solar system as deduced from Kepler's third law. There will, however, be an equal force acting on the Sun, causing it to experience an acceleration This acceleration will be small by comparison with the acceleration experienced by a planet, since P is always very small compared with (for Jupiter, the most massive planet, 5/P = 1050). The assumption, implicit in the above argument, that the Sun can be regarded as a stationary body is therefore a valid approximation, but an accurate discussion of planetary motions must make an allowance for the Sun's motion. This discussion we shall defer until Section 8.3, where it will appear that, assuming the funda mental validity of Newton's law of gravitation, the first two laws of Kepler are accurate consequences, whereas the third law is only approximately so.
y5
r
y5jr2
y5Pjr2,
y5Pjr2 yPjr2• 2 y5jr 5
4.6. The pr-Equation of an Orbit.
Elliptic Harmonic Motion Consider again the plane motion of a particle of mass m subjected
f(r)
to an attractive force per unit mass acting towards a fixed point 0 (Fig. 4.9). If cf> is the angle between the radius vector OP and
FIG. 4.9.-The pr-Equation
the direction of motion, by resolving along the normal to the orbit we obtain the equation of motion
mf(r) sin cp mKv2, =
(4.46)
where K is the curvature of the path at P. Let p be the perpendicular from 0 to the line of motion through P. Then sin cp = pfr and
104
A C O U R S E IN A P PLI E D M A T H E M A T I CS
K = dpjrdr. Also, from equation (4.5), v = hjp. in equation (4.46), we obtain h2 dp = f(r), · pa dr
[cH.
Hence, substituting
(4.47)
an equation which permits the calculation of f(r) when the relationship between p and r for the orbit is known. Integrating equation (4.47) with respect to r, we find that h2
j)2
=
constant
This is the pr-equation of the orbit. tion (4.48) yields the equation v2
=
constant
-
2fj(r)dr. .
Substitution of -
2Jj(r)dr, .
(4.48) h
=
pv in equa
(4.49)
which is the energy equation (4.24). Conversely, we are provided with an alternative mode of derivation of the pr-equation from the energy equation. y
FIG. 4.10.-pr-Equation of an Ellipse
As a particular case, we will suppose that j(r) = w2r, i.e., the attrac tive force is proportional to the particle's distance from 0. This is the problem already solved by another method in Section 3.3. Equa tion (4.48) takes the form
(4.50 )
4]
105
P O L A R R E S O L U T E S O F A C C E L E RA T I O N
We shall show that this is the pr-equation of an ellipse relative to its centre as pole. Let the Cartesian equation of an ellipse be expressed in the standard form (4.51) The equation of the tangent at the point P(X, Y) (Fig. 4.10) is Xx + Yy = 1 b2 a2 '
(4.52)
and the perpendicular p from the centre (0, 0) to this line is accordingly given by the equation (4.53) X2 Y2 Now 2 + b2 = 1 and hence, a
where X2 + Y2 = OP2 = r2 . The pr-equation of the ellipse is accordingly (4.54) Comparing this equation with equation (4.50), we observe that they are identical if a and b are chosen so that
h = wab, C = w2 (a2 + b2) .
(4.55) (4.56)
It follows that the orbit represented by the equation (4.50) is an ellipse with its centre at the centre of attraction, as previously deduced in Section 3.3. Putting h = pv in equation (4.50) and substituting for C from equa tion (4.56), we obtain the energy equation for this type of motion, viz., v2 = w2 (a2 + b2 y2 ) . (4.57) _
This is equation (3.48) again.
A C O U R S E IN A P PLI E D M A T H E M A T I C S
106
[CH.
During the periodic time T, the radius vector sweeps out the whole area of the ellipse rrab. Hence
rrab y - zlh - 21 wab ,
from which it follows that
T = 2rr.
(4.58)
(J)
This equation reveals that the time taken to make a complete circuit of an orbit depends only upon the constant w governing the attractive force and is independent of the particular orbit being described.
A particle moves in a circular orbit under the action of a central force directed towards a point on the circumference. Prove that the force is one of attraction varying inversely as the fifth power of the distance. Let 0 be the centre of attraction (see diagram) and let OA be a diameter of the circular orbit. If P is the position of the particle at any instant and ON is the perpendicular from 0 on to its line of motion, LOPN = LOAP = q,. Hence p = r sin q, = r . OPJOA = r2f2a, where a is the radius of the orbit.
Example 8.
Thus
dp = � and h'J_• r!P_ h2r = 8a"h" dr a p dr ap• r5 and, by equation (4.47), f(r) = 8a2h2fr5• Thus, the attractive force must vary inversely as the fifth power of r. =
4.7. Motion on Rotating Wires
Suppose that a smooth straight wire is compelled to rotate in a horizontal plane about a vertical axis passing through a point 0 of its length with constant angular velocity w and suppose that a bead P
4]
POLAR RESOLUTES O F ACCELERATION
107
of mass m is free to move along the wire. At time t, let r be the distance of the bead from 0 and let e be the angle made by the wire with a fixed direction. The reaction of the wire upon the bead will act in a direction perpendicular to the wire and, since the bead has no resolute of acceleration vertically, the component of the reaction in this direction will exactly balance the weight force mg. Let R be the R
FrG.
4.11.-Bead on a Rotating Wire
resolute of this reaction in the plane of the motion and perpendicular to the wire (Fig. 4.1 1) . Resolving along and perpendicular to OP, we obtain the equations of motion m(r
But
- r62) = 0, '; :e (r26) = R.
(4.59)
- w2r = 0,
(4.60)
e = w (a constant) and hence, these equations are equivalent to r
R = 2mwr.
The first of the equations (4.60) determines the motion of the bead on the wire and the second specifies the reaction R at any instant. The first of equations (4.60) is a linear equation with constant coefficients having characteristic roots ± w . The general solution of this equation is accordingly (4.61) where A and B are arbitrary constants to be determined by the initial conditions. Assuming that the bead is stationary on the wire and distant a from 0 at time t = 0, the initial conditions are r = a, r = 0. Hence A + B = a, wA - wE = 0, (4.62) yielding A we have
=
B = fa.
Substituting these values in equation (4.61), (4.63)
A C O U R S E IN A P PL I E D M A T H E M A T I C S
108
[cH.
determining the manner in which the bead recedes from 0 along the Wire. Substituting for r from equation (4.63) into the second of equations (4.60), we now obtain (4.64) R = 2maw2 cosh wt . The following two examples illustrate more difficult problems in which additional forces act upon the bead.
A smooth wire is constrained to rotate in a verticalplane about a point 0 of its length with constant angular velocity w. At time t = 0 the wire is horizontal and is moving downwards. At this instant a bead, threaded on 0 ...--::-.---- the wire, is released from 0. If r is the distance of the bead from 0 at time t, prove that r = /w• (sinh wt - sin wt) . Show also that the reaction of the wire at this time is given by R = mg(cosh wt 2 cos wt).
Example 9.
-
If 6 is the angle made by the m9 wire with the horizontal at time t, then 6 The forces acting on the bead are the reaction of the wire perpendicular to the wire, and the vertical weight Resolving radially and transversely, we obtain the equations =
wt.
R, mg. d (r2o)" = R + mg cos 6. r62) = mg sin 6, m m (r r lit Since 6 = wt, we have (i) r - w2r = g sin wt, R = 2m wr - mg cos wt. The first of these equations is a linear equation forr, having CF Aewt + Be-wt. A PI is found to be 2!,2 sin wt. The general solution is accordingly _ff_ sin wt r = Aewt + Be-wt _ 2w2 (ii) Initially, t = 0, r = r = 0. Hence A + B = 0, Aw - Bw - fw = 0, from which we deduce that A = !', • B = 4!',2 Substitution of these 4 2 values for A and B in (ii) yields the required solution for viz., r = 2gw2 ( ewt -2 e-wt - sm. wt) = !,. (sinh wt - sin wt). 2 -
-
•
-
r,
It now follows that
r
=
fw (cosh wt
-
cos
wt).
Whence, from the second of equations (i), we obtain the stated formula for
R.
4]
POLAR RESOLUTES O F ACCELERATION
109
A narrow straight tube of length 2a is rotating in a plane about one end with constant angular velocity w. Inside the tube is a small bead of mass m which is instantaneously at relative rest at the mid point. The coefficient of friction between the bead and the tube is f· Neglecting the effect of gravity, calculate the normal reaction between the tube and bead at time t after the instant of relative rest. Show that the particle reaches one end of the tube after a time 2 log 2·5/w approximately. (M.T.) If R is the normal reaction, !R is the frictional component of the reaction. Let r be the distance of the bead from the centre of rotation 0 at time t. With a = wt, the equations of motion are m(� - w2r) = -!R, 2mwr = R. (i) Eliminating R between these equations, we obtain {2D2 + 3wD - 2w2)r = 0, where D dfdt. The characteristic roots of this equation are found to be !w and -2w. The general solution is accordingly r = A elwt + Be-2wt. (ii)
Example 10.
==
The initial conditions at = 0 are given by = from equation (ii) that these imply A + = !wA - 2wB = 0. Thus A = 4 5, B = f5 and hence,
af
a
r a, r = 0.
t B a,
r = �(4eiwt + -e-2wt) .
We deduce
(iii)
Suppose that the particle reaches the end of the tube at = T. At this instant = Hence, employing equation (iii),
t
r 2a.
2a = �(4etwT + e-2wT) 5 4elwT + e-2wT = 10. (iv) Since is positive, e-2wT will be less than unity, whereas 4e!wT will be greater than 4 . Assuming, for the moment, that e-2w T is negligible by com parison with 4elwT, equation (iv) is approximately 4eiwT 10 and hence = log 2·5/w very nearly. For this value of e-2wT = (2·5)-• = 0·0256, whereas eiwT = 2·5. Thus e-2wT is only 1 % of eiwT and the above approximate procedure is justified.
T
=
T 2
T,
1 10
A C O U R S E I N A P PLI ED M A T H E M A T I C S
[cH.
Substituting for from equation (iii) in the second of equations (i), we calculate the required formula for R, viz., R=
r
tmaw2 (elwt - e-2wt).
We conclude this Section b y solving a problem i n which two particles are involved. The method is to deal with each particle separately, writing down appropriate equations of motion in each case. A smooth straight wire AB is made to rotate about A in a horizontal plane with constant angular velocity w. A small bead of mass m slides on the wire. The bead is attached to a light inextensible string, which passes over a pulley at A and then hangs vertically supporting a particle ofmass 3m. Initially the bead is at distance a from A and its radial velocity is zero. Show that it reaches A after a time w2a) _! cosh-1 ( 1 3g w (B.U.) has elapsed. What happens if a > 3gfw2 ? Let r be the distance of the bead from A at time t and let T be the tension in the string. Then the radial equation of motion of the bead is (i) m(r - w2r) = -T. The acceleration of the mass 3m will be ii in an upward sense and hence its equation of motion is (ii) T - 3mg = 3mr. Eliminating T between equations (i) and (ii), we deduce that ·,y !-w2r = -!g. This equation has the general solution r = A cosh iwt + B sinh iwt + w3�. Initially t = 0, r = a, r = 0 and thus r = w3g2 - (w3g2 - a) cosh iwt. (iii) Assuming that a < 3gfw2, this indicates that r decreases steadily. When r = 0, 2a -1 cosh iwt = ( 1 � ) g 2 2 1 t = w cosh- ( 1 - w3ga ) If a > 3gfw2, equation (iii) shows that r increases indefinitely and thus the
Example 11.
-
-1
-
-
-
-
1
bead never reaches A .
4.8. Motion on Surfaces of Revolution
Suppose that a smooth surface of revolution is fixed with its axis Oz vertical and that a particle P of mass m moves upon it under the action of gravity and the reaction R of the surface alone (Fig. 4.12). Let (r, e, z) be the cylindrical polar coordinates of P. By consideration of the motion of the projection of P on the xy-plane, we conclude that
4]
POLAR RESOLUTES O F ACCELERATION
Ill
the components of the particle's velocity along and perpendicular to NP are respectively. In addition, the particle has a velocity component of z in the direction due to its vertical motion. We can now write down the energy equation in the form
(r, re)
Oz tm(r2 r282 z2) mgz +
+
z
R
+
=
constant.
(4.65)
FIG. 4.12.-Particle on Smooth Surface of Revolution
The particle's components of acceleration comprise the familiar polar components in the horizontal plane along and perpendicular to NP and a vertical component z. Hence, resolving horizontally and in a direction perpendicular to NP, we obtain the equation
h
m- -d (r26) r dt
=
0 or
r26 h' =
(4.66)
where is a constant equal to the moment of the particle's velocity about the axis Eliminating e between equations (4.65) and (4.66), we find that
Oz.
r2 �r .i2 +
+
=
c
-
2gz.
(4.67)
Suppose that the equation of the surface is given in the form
r = f(z). Then r = f' (z)z and hence equation (4.67) is equivalent to z• 2 C 2gz f-'2h2/f2 -_ G(z) . _
-
-
l
+
(4.68)
(4.69)
A C O U R S E IN APPLI E D M A T H E M A T I C S
112
[CH.
an argument identical with that which was applied to equation (4.By 35), we now deduce that, if z1, z2 are two consecutive zeros of G(z) and the initial value of z lies between them, then during the subse
quent motion z will oscillate between these values indefinitely. Thus, the particle will rise and fall between two horizontal circles which are the sections of the surface by the planes = and = As an example, consider the case of a particle moving on the interior of a smooth sphere of radius Taking 0 at the centre, the equation of the sphere is
a.
z z1 z z2•
r = (a2 - z2)!-.
Hence, = may be written
j(z) (a2 - z2)!, f'(z) = -zj(a2 - z)!- and
(4.69) (4.70)
equation
G(z) are given by the roots of the cubic equation (C - 2gz)(a2 - z2) - h2 = 0. (4.71) If = z0 initially, z2 must be positive for this value of and hence also must be the left-hand member of equation (4.71). This member is accordingly negative for z = -a, positive for z z0, negative again for z = a and positive for z = Hence the roots of equation (4.71), viz., zv z2 , z3, lie in the intervals (-a, z0), (z0, a), (a, ) respectively and the particle will oscillate between the planes z = zv z = z2 • It has been tacitly assumed in the preceding theory that R does not The zeros of Z
Z
SO
=
C¥J.
oo
vanish during the motion, for if it does the particle will leave the surface. To check this we require a formula for R. Let !f; be the angle made by the normal to the surface with the z-axis (Fig. Then, resolving vertically, we obtain = R cos t/; -
4.12).
mi
mg.
(4.72)
(4.69) with respect to t yields = m(g + fG' ) sec !f;. (4.73)
But, differentiation of equation G ( z. Hence R= '
z)
2zi
Since 1/J can be obtained in terms of z, this latter equation specifies R in terms of this variable. Thus, in the case of the spherical motion, cos 1/J = (negative sign since 1/J is acute when is negative) and hence
z
R=
m(C - 3gz)ja. We observe that R is positive provided z < Cj3g.
-z/a
(4.74)
A particle moves on the inside of a smooth sphere of radius a. It is projected with speed y(3ga) along the horizontal great circle. Show that the motion is confined to the part of the sphere between the horizontal great circle and a horizontal circle with centre at a depth !a below the centre of the sphere.
Example 12.
(S.U.)
4]
POLAR RESOLUTES O F ACCELERATION
1 13
In this case = Hence equation
C 3ga, h = ay'(3ga). (4.7 1) takes the form z(2z + a)(z - 2a) = 0 and the roots are 0, -!a and 2a. It follows that the particle moves as stated provided R is positive for values of z in the interval (-!a, 0) . But, by equation (4.74), R = 3mg(a - z)fa and R is positive for all z < a. Example 13. A paraboloid of revolution having equation r2 = 4az is fixed with its axis vertical and vertex downwards. The inner surface is smooth and a particle of mass m is projected horizontally from a point on it at the level of the focus with speed 2(ag)l. Show that the particle will move between two circles of radii 2a and 2y'2a. Prove also that the reaction R of the surface is given by the equation � R = 6mg ( 1 + �r The conditions of projection require that C = 6ag, h = 4a(ag)l. Also, f(z) = 2(az)t. Hence, equation (4.69) shows that .z.• 2g(2a - z)(z - a) G(z). = z+a G(z) is zero when z = a or 2a and hence the particle moves between the two horizontal circles at these levels. Also, rp is the angle made by the tangent to a vertical section of the surface through its axis and the horizontal. Hence tan rp = Equation
dz = r = (zfa)i, 2a r ( sec rp = l + � · dr
(4.73) now yields the stated formula for R.
EXERCISE 4 I. A particle is describing an elliptic orbit about a centre of force at one of its foci. At a point P on the orbit, distant c from 5, the centre of force, the tangent to the orbit is inclined at an angle sin-1 (3/5) to 5P, and at a point Q on the orbit, distant 3cf2 from 5, the speed of the particle is one-half of its speed at P. If the intensity of attraction on unit mass at unit distance is fl., find the speed at P, and prove that the major axis of the orbit is 9c/5 and find its eccentricity. (L.U.) 2. A comet is describing a parabolic orbit about the Sun and at its closest approach to the Sun the velocity V in the orbit is suddenly decreased to n V (n < 1), without change of direction of motion. Show that subsequently the comet describes an ellipse and that the ratio of its least to its greatest distance from the Sun is l/n2 I. (D.U.) 3. A particle P is describing a circle under a law of force [L/OP2 per unit mass directed towards the centre 0. It collides and coalesces with an equal particle which is at rest. Show that, if the composite particle moves under the same law of force, it will describe an ellipse of ec centricity 3/4. Show also that the periods of description of the circle and the ellipse are in the ratio 7y7 8. (L.U.) -
[cH. A C O U R S E I N A P PLI E D M A T H E M A T I C S 114 4. A particle of mass m is describing an ellipse whose principal axes are of lengths 2a and a, under the action of a force fLfr2 per unit mass, to
one of its foci. When the particle is at one end A of the minor axis it receives an impulse and its orbit becomes a parabola with vertex at A . Prove that the magnitude of the impulse is m
{�
(3 ±
y2)r
(L.U.)
5. A particle P moves under the action of a force fLfSP2 directed towards a fixed point S. If the path of P is an ellipse, and w1, w2 are the greatest and least angular velocities of SP, show that the mean angular velocity of SP with respect to the time is
2(w1w 2) !/ w1t + w
(L.U.)
6. A particle is describing a circle of radius under an attractive force per unit mass directed towards the centre. An outward radial velocity is suddenly impressed on it in such a way as to leave the transverse velocity unaltered ; prove that it will describe an ellipse and find the periodic time. (L.U.)
a
fLfr2
(fLf5a)t
7. A particle is describing an ellipse of eccentricity e about a centre of force at a focus. When it is at one end of the minor axis its velocity is, doubled. Prove that the new path will be a hyperbola of eccentricity y(9 (L.U.) -
8.
8e2).
and under A particle of unit mass is describing an ellipse of axes an attraction fLY to the centre C when it is at a distance from C. When the particle is at a distance 3b/2 from C the intensity of attrac tion is suddenly increased in the ratio Prove that the axes of the new orbit are (y79 ± (L.U.)
4b
y15)bf4.
r
2b
1 : 4.
9. A particle of mass m is describing an ellipse of major and minor axes and respectively about a centre of force at the centre. When it reaches the end of the major axis it strikes and coalesces with a which is at rest. The central attraction per unit particle of mass mass is unchanged. Prove that the new orbit is an ellipse of major and minor axes and + respectively. (L.U.)
2a
2b
nm 2a 2bf(n 1)
10.
Particles P and Q of equal masses describe the same elliptical orbit under an attractive force directed towards the centre. If, at any instant, OP and OQ are conjugate semi-diameters, show that they will always be conjugate semi-diameters and that the sum of the KEs of the particles is constant. (L.U.)
1 1. A comet describes a parabola about the Sun as focus.
Show that its velocity perpendicular to the axis of its orbit varies inversely as the radius vector from the Sun. (L.U.)
12.
A particle of mass moves in a given plane about a fixed point 0 under the action of a force which is always normal to OP( = r) and of magnitude where is a constant. Initially the particle is at
m
mkifr,
k
4]
POLAR RESOLUTES OF ACCELERATION
1 15
rest at r = a. Prove that, in the subsequent motion, the speed V of the particle when at a distance r from 0 is given by a V 2 = 2k 2 + log !:: � . r aJ (L.U.) 13. At a point A on a smooth horizontal table is a particle attached to one end of an elastic string of natural length a. The other end of the string is attached to a point P on the table, the distance A P being ta. The particle is projected along the table, perpendicular to PA . In the subsequent motion c is the greatest length attained by the string. Prove that the initial KE of the particle is 2fc2 (c - a) 2/(4c2 - a2), where f is the force that gives unit increase of length to the string. (L.U.) 14. A particle P of unit mass is repelled from a fixed point 0 by a force fl.fr2, where r = OP. Prove that the orbit of P is a branch of a hyper bola of which 0 is the outer focus and that the speed v of the particle is given by v• =
{ -r
fl.G - �)·
where 2a is the major axis of the orbit. The particle is projected from infinity with velocity V along a line which is at a perpendicular distance p from the centre of force. Prove that the particle will eventually return to infinity along a direction making an angle 2 tan-1(f1./P V2) with the initial direction of motion. (L.U.) 15. A particle of unit mass is attracted towards a centre of force S with a force equal to a(u2 + 2cu3) where 1/u is the distance of the particle from S. It is projected from a point P at a distance c from S with a velocity 2a c at an angle of 60° with PS. Show from the formulre for the acceleration components in polar coordinates that d 2u 3 + tu = de• 8c' where 8 is the angle between SP and the radius vector to the particle, and find the distance of the particle from S when 8 = 120°. (M.T.) 1 6 . A particle P is moving in a plane under an attraction of magnitude 2fr3 per unit mass towards a fixed point 0 in the plane, and at t = 0, r = 2 and the radial and transverse components of velocity are (3/2)! and 1 respectively. Show that r = 2fr3, and find r as a function of t. (L.U.) 17. A particle P, of mass m, is moving in a circle of radius a and centre 0 under a force [Lm(r + 2a3fr2) directed towards 0. If P is acted on by an impulse tangential to the path and of magnitude (3[Lm2a2) t , show that the velocity of P is immediately doubled and that the greatest and least distances from 0 in the ensuing motion are a and 3a. (L.U.)
,
:( t
116
A C O U R S E I N A P P L I E D MATH EMAT I C S
[CH.
18. If (lfu, 8) are polar coordinates of a particle which moves in a plane under the action of an attractive force fLU3 per unit mass towards the pole 0, and the particle is projected from a point P with velocity 2yfL/ay3 at right angles to OP where OP = a show that the particle describes the curve u = cos !8fa. 19. A light rod AB of length 4a is rotating in a horizontal plane about its fixed end A , when a smooth ring of mass m is projected towards A along the rod from the end B with speed V relative to the rod. Throughout the motion of the ring, the rod is constrained to rotate with constant angular velocity w. Prove that the ring will come to instant aneous rest at the mid-point C of AB if V = 2y3aw, and find the force exerted by the rod on the ring at time t during its motion from B to C. (L.U.) 20. A fine smooth tube rotates about a point 0 of itself with uniform angular velocity w in a horizontal plane. The tube contains a particle of mass m attached to 0 by a fine elastic thread of natural length a and modulus 2maw2• Initially the thread is just taut and the particle is at rest relative to the tube. Show that the particle makes one com plete oscillation in the tube in each rotation, and that the greatest horizontal pressure of the tube on the particle is 2maw2• (M.T.) 21. Employing the usual notation, show that the energy equation (4.24) can be written in the form ,
h2[(��r
+
J = constant - 2 jJ(r)dr.
u2
Hence, by differentiating with respect to 8, obtain equation (4. 10) . 22. A comet describes a parabolic path. Determine the time it spends within the Earth's orbit (regarded as circular) in terms of c, the least distance of the orbit from the Sun, a, the radius of the Earth's orbit, and T, the length of the Earth's year. (B.U.) 23. If a stream of water is moving with uniform angular speed in such a way that the force on each individual particle acts at right angles to the radius vector from the centre of rotation, show that the path of the particle is of the form r = aeO + be-0, and prove that the force at any point is proportional to y(r2 - c2), where c is a constant. (B.U.) 24. A particle of mass m on a smooth horizontal table is attached to one end of a string which passes through a small hole C in the table. When the particle is moving, the tension in the string is maintained by a force applied to the other end of the string. Initially the particle is moving with angular velocity 0 in a circle of radius a and centre C. The string is then pulled so that the distance of the particle from C decreases at a constant speed u. Obtain expressions for the variation with re spect to the time of : (i) the angular velocity of the particle about C, and (ii) the tension T of the string. Deduce the time taken for the radius vector from C to the particle to make one complete revolution starting from the instant when the radius first begins to decrease. (B.U.)
4]
P O L A R R E S O L U T E S O F A C C E L E RATI O N
1 17
25. A particle, subject to a central attractive force !J.U4 per unit mass, is projected from a point at a distance b from the centre of attraction with a velocity (2!J./b3)t at right angles to the radius. Show that the other apsidal distance is !b(yl3 - 1 ) . (Hint : Use the result of Ex. 21.) (S.D.) 26. Two particles of masses m, M, connected by a light inextensible string of length 2a, can slide in a long, smooth, straight tube. The tube is rotated in a horizontal plane about a point 0 of itself with constant angular speed w. Show that in the ensuing motion the tension of the string is constant ; and prove that if initially the particles were at rest with the string taut and with its middle point at 0, in a time t they will move along the tube a distance a(M m) (cosh wt - 1) (Li.U.) M+m 27. A particle, of mass m, is projected horizontally with speed V along the inner surface of a fixed smooth spherical shell of internal radius a. The point of projection is at a depth a/2 below the level of the centre of the spherical surface. Obtain the energy equation and show that the particle rises initially if V2 > 3agf 2. If the greatest and least depths below the level of the centre are aj2 and af4 respectively, show that when the depth of the particle is 3af8, the magnitude of the normal reaction of the surface is 2 1mgf8. (S.D.) 28. A right circular cone of angle oc is fixed with its axis vertical and vertex downwards. A particle of mass m is projected with velocity v horizont ally along the smooth inner surface of the cone from a point at a height h above the vertex. Derive the energy equation and from this show that, if v2 < gh, the particle will begin to fall below its original level. Taking v2 ghf6, find the height above the vertex of the cone of the lowest point of the path. (S.D.) 29. A smooth surface of revolution is formed by rotating the parabola y 2 = 4ax about the tangent at the vertex. The surface is fixed with Oy vertical and a particle is projected with velocity (2agf15) l horizont ally from a point vertically above a focus of a section. Show that the particle moves between two horizontal circles of radii a and ta. -
=
CHAPTER 5
IMPULSIVE MOTION OF PARTICLES 5.1. Impulse and Momentum
m
Consider a particle of mass which moves under the action of a force Let be its velocity vector at time Its equation of motion is therefore (5. 1 )
F.
v
t.
F = mv. . The vector mv is termed the momentum o f the particle. Denoting this quantity by p, it will be observed that equation (5.1) is equivalent to F = p, (5.2 )
i.e., the applied force is equal to the rate of change of momentum. This statement is an alternative interpretation of Newton's Second Law. Integrating equation (5.2) with respect to over some time interval we obtain
t
(t0, t1},
(5.3) p0 and p1 being the values taken by the momentum vector at the instants respectively.
t0, t = t1 ,Ft dt ist =a vector quantity called the impulse of the force F calculated f t,
{t0, t1).
over the time interval Equation (5.3) accordingly asserts that this impulse of is equal to the increase in momentum experienced by the particle during this time. In the application of equation (5.3) to particular problems, it will be convenient to equate the components of the impulse in any three directions to the corresponding components of the momentum vector. Thus, if represent the components of the velocity vector in three assigned directions (usually mutually perpendicular) and (X, Y, Z) are the corresponding components of the force vector,
F
(u, v, w)
will be the components of p the components of the impulse. the three equations
(mu, mv, mw) , t , dt, ftZ, dt) will be and (iX dt, itY to
to
to
Equation (5.3) is then equivalent to
fz dt = mwl - mwo. t,
118
(5.4)
[CH. 5]
I M P U L S I V E M O T I O N O F PARTI C L E S
119
The impulse equation (5.3) , though generally applicable, is par ticularly useful in circumstances where a large force acts upon a particle for a very short time, e.g., when the particle is struck a blow or collides with another particle. In such a problem, the magnitude of the force acting will rise very rapidly to a maximum value and then de crease to zero in an equally short time, as illustrated graphically in Fig. 5.1. It will usually be very difficult to specify precisely the F
FIG. 5.1.-Graph of Impulsive Type Force
manner of variation of F in such a case. If, however, the equation of motion (5.1) is to be employed to calculate the effect of the force, F should be a known function of the time. This difficulty is avoided by having recourse to equation (5.3). If t0 is the instant when the force is first applied and t1 is the instant when this application terminates, the left-hand side of this equation represents the impulse of the blow applied to the particle and is easily specified in terms of three numbers, its components. In the case of an impulsive force which varies after the manner indicated in Fig. 5.1, its impulse is measured by the area under this graph. It is clear, therefore, that although the maximum magnitude of the force may be very large, its period of application will be small so that its impulse will be a conveniently finite quantity. Given the impulse, equation (5.3) permits us to calculate the increment in momentum it causes and hence the change in velocity. Alterna tively, from an experimental determination of the velocity change, we can infer the impulse which must have acted. The specification of a blow by means of its impulse is clearly not so detailed a description as one in terms of the force and its mann('}r of variation with the time during the period of its application, Less information is therefore available from the impulse equation than can
120
A C O U R S E IN APPLI E D M A T H E M AT I C S
[CH.
be obtained from the equation of motion (5.1). Thus, although the impulse equation will determine the velocity change caused by the blow, it will not permit a calculation of the particle's displacement during the blow. This can be assessed only from the fundamental equation of motion, since it depends upon the manner of variation of the force constituting the blow. It is a common experience, however, that the action of the blow is very nearly instantaneous, so that the displacement observed during the infinitesimal time interval of its application is very small and can usually be neglected. We shall accordingly regard the effect of an impulsive force acting on a particle to be an in stantaneous change in velocity of the particle with no concurrent change in its position. A particle of mass m is attached to a fixed point 0 by an inelastic string of length a. Initially it is on the same level as 0 and at a distance ia from this point when it is projected vertically downwards with velocity U. Show that if the particle eventually describes complete vertical circles about 0, u• � 3ga(4 + v3). The string becomes taut when the angle made by the 0 string with the vertical is 30° as shown in the diagram and the particle is at P. At this instant the particle has fallen through a distance h = iv3a and its velo city is where u• = u• + 2gh = u• + y3ga.
Example 1.
u,
The string being inelastic, the particle's velocity is now transformed instantaneously from u vertically to a value at right angles to OP. This velocity change is caused by an impulsive tension set up in the string. Resolving along and perpendicular to OP and employing equations we have cos sin (i) It will be noted that the impulse of the gravitational acting on the particle has been omitted from force these equations. If -r is the duration of the impulse, the impulse of is and this will be negligible, since -r is very small. In general, in such problems U the impulses of ordinary finite forces may all be disregarded. The first of equations (i) defines The second of these equations shows that and hence + Let V be the particle's velocity when it is vertically below 0. The loss of PE in falling from P to this point is - cos From energy considerations it therefore follows that
v
I
(5.4), I = mu 30°, 0 = mv - mu 30°. mg mg mg-r,
I. v2 = t{U2 y3ga). mga(l 30°) = mga(l - iv3). tm v• - imv• = mga(l - h/3) v• = t(U"• + -yl3ag) + 2ga(1 - tv3) = tu + ga(2 - iv3). (ii) On p. 75 we have shown that the particle will now describe complete vertical circles about 0 if v• � 5ga. The condition required is accordingly iU" +• ga(2 - iv3) :;;?: 5ga, u :;;?: 3ga(4 + y3). or v = iu
5]
I M P U L S I V E M O T I O N O F PARTI C L E S
121
5.2. Newton's Third Law
Hitherto we have been principally concerned with the motion of a single particle. If a number of interacting particles are involved in a problem an additional hypothesis concerning the forces which are exerted between the particles must be introduced before we are in a position to arrive at a solution. Such an hypothesis is provided by Newton's Third Law, which has been stated on p. 2 1 . It is a direct consequence of this law that if two particles in motion are connected by an inelastic string which suddenly becomes taut, for a short period of time equal and opposite forces acting in the direction of the string will be applied to the particles. These will accordingly subject each other to equal and opposite impulses. We shall make use of this fact in the examples which follow.
Two particles A and B, each of mass m, are attached to the ends of a light, inextensible string of length l, and B moves in a smooth straight groove in a smooth horizontal table. Initially A is at rest in the groove, AB being perpendicular to the groove and of length il. If A is projected with velocity v along the table and parallel to the groove, show that, when B begins to move its velocity is 3vf1. Find the impulsive tension in the string and the impulsive (L.U.) reaction of the groove. When the string becomes taut, AB makes an angle of 30° with
Example 2.
the groove. The groove being J smooth, it can only exert a force on B in a direction perpendicular to its length. Let ] be the im pulse of this force when the string becomes taut. Let be the im pulsive tension in the string exerted on both particles as shown in the diagram. Let be B's speed when its motion commences. Resolving A 's velocity into components along and perpendicular to A B, the component along BA must equal the component of B's velocity in this direction, viz., u cos Resolving the change in the IL c os 30• momentum of A along and perpendicular to AB and equating the component along AB to the corresponding component of impulse, we obtain the equation cos cos (i) Resolving along and perpendicular to the groove for the impulses acting on B, we find that (ii) cos = (iii) ] sin Elimination of between equations (i) and (ii) shows that Then, from (ii), Hence, from (iii),
I
u
30°.
I = m(v 30° - u = imv'3(v - u) .
mu = I 30° !Iy3, = I 30° = !f. I I = 2y'3mvf1.
30°)
J = y'3mvf1.
u = 3vf1.
A C O U R S E IN A P P L I E D M A T H E M AT I C S
122
[cH.
Three particles A, B, C, of masses 3m, m, 2m respectively, lie on a smooth, horizontal table, and the angle ABC is IX (< !,.). The particles A and B and the particles B and C are connected by light, inextensible strings which are just taut. A horizontal impulse P is applied to B in the direction AB and the initial velocities of A and C are u and v respectively. Show that the com ponents of the initial velocity of B are u along AB and (u cos IX - v)fsin IX perpendicular to AB, and prove that + 2 sin2 IX) . u - P(l 6m(l + sin2 ) (L.U.)
Example 3.
_
IX
Let I, 1 be the impulsive tensions in the strings AB, BC respectively. Since I is the only impulse to act upon the particle A, it commences to move in the direction AB with velocity Similarly, C begins to move in the direction CB with velocity Let be the com ponents of B's velocity along and per pendicular to AB. The component in the direction AB must equal the com ponent of A 's velocity in this direction, i.e., = Similarly, if B's velocity is resolved along and perpendicular to BC the component along CB must equal Thus = cos IX - sin IX, or sin IX = cos oc - = cos IX v, U COS IX - V = n_IX_ -� si� Resolving the impulses acting on B A 3m along and perpendicular to AB and equating to the momentum increments in these directions, we obtain - I - 1 cos IX = (i) 1 sin IX = cos IX - ) si n IX (ii) Since the impulses I and 1 generate velocities and in the particles A and 1 = Hence equations (i) and (ii) and C respectively, I = are equivalent to = + cos IX, (iii) cos IX = + sin• IX) . (iv) Elimination of between these equations now yields the stated result for
u. (p, q)
v.
p u.
q
v.
v p p q
q v u
P
u.
v
-
m(u
3mu 2mv. P 4mu 2mv u v(l 2
mu, . vf u
v
.
Another type of problem in which equal and opposite impulses are applied between two interacting bodies is that in which a missile is fired from a gun. During the short time interval the missile is moving down the gun barrel the pressure of the propellent gases exerts equal and opposite forces on these two bodies. Equal and opposite impulses are accordingly applied to the missile and the gun, causing the former to be launched into its trajectory and the latter to recoil. A gun is mounted on a railway truck which is free to run without friction on a straight horizontal railway track. The gun and truck, together of mass M, are moving along the track with velocity u, when a shell, of mass m
Example 4.
5]
IMPULSIVE MOTION O F PARTICLES
123
(not included in M), is fired from the gun with muzzle velocity v relative to the gun. If the gun barrel and track lie in the same vertical plane, and the former is inclined at an angle to the direction in which the truck is moving, show that the shell has a horizontal range. 2v sin {u + Mv cos } g M+m and that the distance between the shell and truck when the former lands is independent of M and m. (L.U.) a
a
a
Let I be the impulsive reaction between the shell and the gun, acting at an angle {3 to the horizontal (see diagram) . The smooth track will exert an
�'--
J
impulse j on the gun in a vertical direction (since it is smooth) . Let be the velocity of the gun in a forwards direction after firing. Resolving horizontally for the impulses applied to the gun and truck, we obtain the equation I cos {3 (i) The horizontal and vertical components of the shell's velocity before firing are respectively and after firing are cos a, sin a . Resolving horizontally for the impulsive motion of the shell, we obtain the equation I cos {3 cos a (ii) Equations (i) and (ii) show that cos a.
V
= M(u - V).
(u, 0)
(V + v
v
)
= m(V + v - u). V = u _ mv M+m
The initial horizontal and vertical components of the shell's velocity are accordingly cos a
u + Mv M + m ' v sin a
respectively. Thus, if T is the time of flight of the shell to the point where it strikes the horizontal plane, = sin cc - T2, sin a. = i.e.,
0 vT T 2v g
!g
124
A C O U R S E IN A P PLI E D M A T H E M A T I C S
[cH.
The range o n the horizontal plane i s now found to be 2v sin IX + cos u (iii) g as stated. During the time the truck moves a distance cos IX 2v sin IX u (iv) = . g The difference between the expressions (iii) and (iv) is 2v2 sin IX cos 1Xfg and represents the distance between the shell and truck when the former lands . We have verified that this distance is independent of and m.
{ Mv IX} M+m
T,
VT
(
_
mv ) M+m
M
5.3. Impact of a Pair of Particles
If two particles are in collision with one another each exerts a large variable force on the other for a short period of time and, by Newton's Third Law, these two forces are always equal in magnitude but opposite in sense. It follows that the impulses of these forces are also equal in magnitude but opposite in sense, and · hence that the momentum increments for the two particles are identical apart from sign. If pi> p2 are the momenta of the particles immediately before collision and bop is the increment in momentum of the first particle due to the col lision, then - bop is the increment in momentum of the second particle and p1 + bop, p2 - bop are the momenta of the particles immediately after the collision. It will now be observed that the vector sum of the momenta after the collision is equal to the vector sum of these quantities before the collision, i.e., the total momentum is conserved in the col lision. This is the restricted form of the Principle of Conservation of Momentum which will be proved in a more general form in Chapter 8. If we take components of the momentum vectors in any direction it follows from the principle just enunciated that the sum of the com ponents before collision is equal to the sum after collision.
(9 (9 C9 C9 FIG. 5.2.-Impact of Smooth Spheres
In the particular case when the particles are small smooth spheres the forces between the spheres will be directed along the line of centres. It follows that the impulses will also be in this direction, and hence neither sphere experiences any change of momentum in a direction per pendicular to the line of centres, i.e., the components of p1 and p2 perpendicular to the line of centres are unaltered by the collision. Suppose the spheres are in motion in the same plane. Let (uv v1)
5]
I M P U L S I V E M O T I O N O F PART I C L E S
125
be the velocity components of one sphere before collision in directions along and perpendicular to the line of centres respectively. Let (u2 , v2) be the velocity components of the second sphere in the same directions and at the same instant (Fig. 5. 2) . Let (u1 ', v1 '), (u2 ', v2 ') be the corresponding velocity components immediately after collision. If m1, m2 are the masses of the spheres the above reasoning implies that (5.5)
or
Also, by considering momentum components along the line of centres and applying the principle of conservation of momentum, we obtain the equation (5.6) The velocities of the spheres before collision being given, the three equations (5.5) , (5.6) are insufficient to determine the motion after collision as specified by the four velocity components u1 ', v1 ', u2 ', v2 '. A fourth equation expressing the elastic properties of the materials of the spheres in mathematical form is clearly necessary. This is provided by Newton's Law of Restitution, which states that the ratio of the component of the relative velocity along the line of centres after collision to the same quantity before collision is a constant depending only upon the elastic properties of the spheres. Since these relative velocities are clearly in opposite senses, the ratio is negative in value and is denoted by -e. e is called the Coefficient of Restitution. Symbolically, we have (5.7) This law of Newton is not on the same fundamental plane with his other laws. Experimental evidence indicates that it is of an approxi mate nature only. However, it is sufficiently accurate for most purposes. The total KE of the spheres before collision is lm1 (u1 2 + v12) + fm2 (u22 + v22). Subtracting the corresponding expression for the total KE after collision and using equations (5.5), we find that the loss in KE due to the collision is
tm1u12 + tm2u22 - tm1u1 ' 2 - tm2u2 '2 1 [ + 2(mi + m2) mi2ui2 m22u22 - ml2ui '2 - m22u2 1 2 + mlm2 (u12 + u22 - ut ' 2 - u2 ' 2)J .
(5.8)
Squaring equation (5.6) , we obtain
m12u12 + m22u22 - m12ut '2 - m22u2 '2 = 2mJ m2 (ut 'u2 ' - ulu2),
(5.9)
A C O U R S E IN A P P L I E D M A T H E M A T I C S
126
(CH.
showing that the expression (5.8) may be written in the equivalent form
m1m - 2(m1 + 2m ) (ul 2 _
-
u2) 2 ( 1
-
e2 ) ,
(5.10)
having employed equation (5.7) in the final reduction. Since the loss in KE given by the expression (5. 10) must be positive, e is numerically less than unity. This is verified by experiment. If e = 1 , there is no loss of KE and the spheres are said to be perfectly elastic. If e = 0 the loss of KE is a maximum and the spheres are said to be inelastic. In these latter circumstances they do not separate after collision. The energy lost is dissipated mainly in the form of heat and sound. In the case of impact between two bodies of finite extension, i.e., one or neither of which can be regarded as a particle, it is usually assumed that Newton's law is applicable to the two points, one on each body, which are in contact during the collision, and relates the com ponents of the relative velocities of these points in the direction of the normal common to the two surfaces in contact. Thus, if a small sphere strikes a fixed plane wall the components of its velocity per pendicular to the wall before and after the collision,u and u' respectively, are related by the equation u' = - eu. A particle is projected from a point A on the inside of a circular ring which is fixed to a smooth horizontal plane. If is the angle between the radius of the circle through A and the initial direction in which it leaves A , and e is the coefficient of restitution between the particle and the ring for each impact, show that the condition that the particle returns to the point A after rebounding twice from the ring, at two points B and C, can be expressed in the form (1 e3)tan2 oc = e3(1 - e). (B.U.) Upon impact at B the velocity com ponent in the direction at right angles to OB is unaltered, whereas that in the direction OB is multiplied by -e.
Example 5.
oc
-
Thus
1 tan fJ = 8 tan oc.
A
Similarly, for the impact at C tan y = 8 tan fJ.
1
5]
I M P U L S I V E M O T I O N O F PART I CL E S But y = tn"
-
127
a. - {3. Hence 1 e tan {3. tan a. + tan f3 = tan a. tan {3
cot (a. + {3) tan {3 ·
1
=
-
e.
Eliminating tan {3 by use of the first equation, we obtain e tan a. + tan a. tan2 a. tan2 a. = + +
tan a.
•
e (1 e e2)
or
-
-
which is equivalent to the result stated.
=
2
e' e•,
Example 6. A
particle is projected at an angle of elevation a. to strike a smooth, vertical wall and after rebounding it passes through the point of projection. If > is the angle of inclination to the horizontal at which the particle rebounds from the wall and e is the coefficient ofrestitution, show that e( 1 + e) tan rp = (1 e) tan {3. (M.T.) Let 0 be the point of projection distant a from the wall PN and let u be the velocity of arrival of the particle at the wall, inclined at an angle {3 to the horizontal (see diagram). Let v be the velocity of rebound from the wall -
y
at an angle > to the horizontal. Since the wall is smooth, the component of the momentum of the particle in the direction is unaffected by the impact, and hence sin = sin {3. Also, by Newton's law of restitution we have
NP
v > u
v cos > = eu cos {3.
(i)
e tan > = tan {3.
(ii)
Dividing this pair of equations, we obtain
128
A C O U R S E I N A P P L I E D MAT H E M AT I C S
[cH.
Taking horizontal and vertical axes Px, Py through the point of impact, the equation of the trajectory of the particle after rebound is (see equation (3. 1 1))
gx•
sec2 q,. y = x tan q, (iii) 2v• If a particle is projected from P with the velocity u reversed it will traverse the same track as did the particle projected from 0. The equation of this track is therefore
gx• ge2x2 sec2 q,, . y = -ex tan q, y = -x tan {3 - 2u• sec2 {3,
(iv) 2v• where we have made use of equations (i) and (ii). Differentiating equation (iv) with respect to x, we calculate that the gradient of this trajectory at O(x = is
a)
-e tan q, - ge2a """V2 sec2 q,, � sec2 q, = e-2 (tan - e tan rp) . v
-tan a =
a
(v)
Since 0 lies on both trajectories, equations (iii) and (iv) must yield identical values for y when we put x = Hence
a. ga2 a tan q, - 2v• sec• q, = -ea tan q, - ge2a2 2V2 sec• q,, :; (1 - e) sec2 q, = tan q,.
(vi)
Dividing equations (v) and (vi), we obtain tan q, �� ( 1 ) = tan IX - tan q,' which is easily verified to be equivalent to the relationship stated.
-e
e•
e
EXERCISE 5
I. Four equal particles A , B, C, D, each of mass m, are connected by equal light, inextensible strings AB, BC, CD, DA and lie at rest on a smooth, horizontal table with the strings taut, so that A BCD is a rhombus and angle BAD = 20( ((X < i-11') . The particle A is given a velocity V along the table in the direction CA (produced) . Find the initial velocity of the particle C and prove that the initial kinetic energy of the system is 2m V2f(l + 2 sin2 0() . (L.U.) 2. Three particles A, B, C, of equal mass m, lie on a smooth, horizontal plane and are smoothly connected by light, rigid rods AB, BC so that the angle ABC = 71' - 0(, (0( < The whole system is moving parallel to AB with speed V, when C collides with a smooth, inelastic wall fixed at right angles to AB. Show that the impulsive blow on the wall is m V(3 + sin20()/(l + 3 sin2 0() . (L.U.) 3. A smooth prism, whose cross-section is a right-angled isosceles triangle, is fixed with its largest rectangular face in contact with a horizontal
t11') .
5]
4.
5.
6.
7.
I M PU L S I V E M O T I O N O F PART I C L E S
129
plane. Two particles, whose masses are in the ratio 2 : I, are simul taneously projected with speed V from the feet of, and directly up, the opposite sloping faces of the prism. The particles move in the same vertical plane and coalesce on meeting at the top of the prism. Prove that the combined particle falls to the initial point of projection of the lighter particle if 4 V2 = 1 7gh, where h is the vertical height of the fixed prism. (L.U.) Four particles of equal mass are attached to a light, inextensible string at points A , B, C, D, where AB = BC = CD, and placed with the three parts of the string taut and forming three sides of a regular hexagon. An impulse is given to the particle at A so that it moves in the direction BA with speed u. Prove that the particle at D begins to move with speed uf13. (L.U.) A small, smooth sphere falls freely from rest through a distance h and then strikes a fixed smooth plane which is inclined at an angle a to the horizontal. If the coefficient of restitution between the sphere and the plane is 0·5, prove that the distance between the first and fourth points of impact is 105h sin a/ 1 6, and find the impulsive reactions of the plane at these impacts. (L.U.) A particle is dropped vertically on to a smooth inclined plane and rebounds, the coefficient of restitution being e. If three suc cessive jumps are of lengths a, b and c respectively, prove that (be - c)f(ae - b) = e2• (L.U.) Two smooth spheres with equal" momenta approach each other from opposite directions, their coefficient of restitution being e. After impact, each moves perpendicular to its original direction. If, at the moment of impact, their common normal is inclined at an angle (L.U.) 6 to the original direction of motion, find 6.
8. One end of a light, inextensible string of length a is attached to a smooth, horizontal floor at a point distant b (< a) from a smooth, vertical wall. An elastic particle of mass m is attached to the other end of the string and rests on the floor with the string taut. The particle is given a horizontal velocity u perpendicular to the string and after striking the wall it rebounds. Find the impulsive tension in the string when it again becomes taut. Show that the particle strikes the wall again in the same place if e, the coefficient of restitution between the particle and the wall, is less than b2f(a2 - b2). Find the velocity of the particle just before it strikes the wall for the nth time. (L.U.) 9. A, B, C, D are the corners of a smooth, rectangular table, bounded along all four edges by a smooth, vertical rim. From the mid-point of AB a particle is projected along the surface of the table in a direction making an angle IX with AB, to strike in turn the rims BC, CD, DA . If the sides AB, BC are of lengths a, b, respectively, and if e is the co efficient of restitution between the particle and the rim, show that the particle will return to its starting-point if tan IX = 2ebfa(1 + e) and that if this condition is satisfied, the particle will always pursue the same path. (L.U.) F (1)
A COURSE I N APPLIED MATHEMATICS 130 [cH. 5] 10. A smooth sphere A impinges on a stationary and equal smooth sphere B, the velocity of A making an angle 8 with the common normal at the moment of impact. Show that the angle through which A is deflected is a maximum when tan2 8 = !(I - e) and is then equal to !1t 28, where e is the coefficient of restitution between the spheres. Show further that in this case the fractional loss of KE of the spheres (L.U.) is ( 1 - e2)/(3 - e). -
I I . A smooth, narrow groove in the shape of a circle is cut in the surface
of a horizontal table. Two particles, A and B, lie respectively at opposite ends of a diameter of the groove. The mass of the particle A is that of B is and the coefficient of restitution between the particles is The particle B is projected along the groove with speed v and collides with A . Prove that, immediately after the second col lision between the particles, the KE of B has decreased by
m,
e.
2m
m9 (I - e2)(5 + e2) 2 v
12.
13.
•
Prove also that, if the speed of A is then one-quarter of the speed of B the value of is (L.U.) A ball of coefficient of restitution is dropped on to a level floor from a height h. Find how long it will continue to bounce. If it is given initially a horizontal velocity v and is subjected to frictional impulses fL times the normal impulse at each bounce, how far will it travel horizontally before it ceases to bounce, assuming that v is large enough for a forward velocity to be maintained throughout? (M.T.) Two particles A and B of equal mass lie touching one another in a smooth, horizontal, circular groove of radius a. A is projected away from B with speed V If is the coefficient of restitution for impact between the particles, show that after n collisions have taken place and B's speed is ! V[l - ( - e)n]. Cal A 's speed is culate also the time which elapses before the nth collision takes place. A particle is projected from a point 0 on a horizontal plane, to hit at a height h a vertical rigid pole, whose base A is at a distance h from 0. The coefficient of restitution between the particle and the pole is t. Find the horizo�tal and vertical components of the velocity of pro jection in order that the particle shall hit the plane again at a distance h from A , and prove that the maximum height of the particle above the plane is 9h/8. (The whole motion may be assumed to take place in the plane through the point of projection and the pole.) A particle of mass M is travelling uniformly in a straight line with energy E when it breaks up into two particles, each of mass tM. One of the final particles is observed to be moving at right angles to the original direction. If the release of energy in the process is Q, find the direction and energy of the other particle resulting from the disinte gration. Show that this situation is only possible if Q > E.
e (2/3)!.
e
e tV[l + (-e)n]
14.
(B.U.)
15.
(B.U.)
CHAPTER
6
MOTION OF A PARTICLE SYSTEM-I 6.1. Systems Involving a Small Number of Particles
In this and the succeeding chapters we shall be concerned with the motion of aggregates of interacting particles. We shall usually take the point of view that each of these systems involves an indefinite but very large number of particles, each of which is a molecule, or a small collection of molecules, of one of the bodies entering into the system. In such a case we shall make use of certain equations of motion which refer to the system as a whole and which assume no precise knowledge in their formulation of the number of particles present in the system. If, however, it is possible to regard a system as being composed of a few particles only, the analysis of its motion may be undertaken by considering the motion of each particle separately, making an allowance for the influence of each particle on the motion of the others according to Newton's Third Law.
The cross-section of a wedge, with three smooth plane faces and of mass 2m, is a triangle whose angles are 30°, 60° and 90° respectively. A small smooth pulley is fixed at the middle point A of the edge at which the angles of all cross-sections are 60°; a fine string is passed over the pulley and has particles P and Q, of masses 3m and m respectively, tied to its ends. The wedge is placed on a smooth, horizontal table with the face opposite to A in contact with the table and the particle Q held at rest vertically below A in contact with the vertical face of the wedge, the particle P lying on the inclined face. If Q is now set free, prove that the acceleration of the wedge is y3gf23, and find the tension in the string and the reaction of the wedge on Q. (L.U.)
Example 1.
A
(a) (b) In the diagram (b) we show the forces acting on the particles P and Q. The forces acting on the wedge ( + pulley) are shown in diagram (a). F and G are the forces of interaction between the wedge and P and Q respectively. T is the tension in the string. R is the reaction of the smooth, horizontal plane on the wedge. Let f be the acceleration of the wedge in the sense shown and let a be the acceleration of the particles relative to the wedge. The acceleration of P 131
A C O U R S E I N A P P L I E D M A T H E MA T I C S
132
(CH.
relative to a fixed observer will be the vector sum of its acceleration relative to the wedge and the acceleration of the wedge. Similarly for Q. Treating the wedge as a particle (the justification for this procedure will be found in Section and taking horizontal components of the forces acting upon it, we obtain the equation of motion (i) Resolving the forces acting on Q and its accelerations horizontally and vertically, we find that = (ii) = (iii) Resolving the forces acting on and its accelerations along and per pendicular to the sloping face of the wedge, we obtain (iv) (v) = Elimination of from equation (i) by the use of equation (ii) provides us with the equation
8.1)
tF - G - tTv 3 = 2mf.
G mf, T - mg ma. P - T = 3m(a - !Jy3), img mgy3 - F imf. !
G
F - Ty3 = 6mf. (vi) 2T 3mg - 5y3mf. a (vii) 8T 9mg 3y3mf. f = �:c. T = 2327 mg. Whence, from (ii), G = y3mgf23. Example 2. Three light, inextensible strings BA , A D, DC support in equilibrium two particles each of mass m, at A and D. B and C are fixed points at the same horizontal level. AD is parallel to BC, and AB and DC are each inclined at 45° to the horizontal. Find the tension in the string BA . If the string DC is cut, show that the tension in BA is immediately reduced in the ratio of 2 : 3. (L.U.) When the particle at A is in equilibrium, let S be the tension in the string AB. Resolving forces acting on the particle vertically, we find that S = mgy2. Adding this equation to (v), we obtain = Eliminating between equations (iii) and (iv), we find that = + Equations (vi) and (vii) now yield
B
8
T A
p
,
I
'"9
J/
/
A
/
m9
0
0
f
/
I>
/
,
,
0
I oQ I '
'
"'9 t
When the string CD is cut, let and Q be the tensions in the strings AB, AD respectively as the motion commences. A begins to move around a circle of centre B and radius AB. Initially, its velocity in this circle is zero, and hence the radial component of its initial acceleration is zero. A 's initial
T
M O T I O N O F A PART I C L E S Y S T EM-I
6]
133
acceleration is therefore in a direction perpendicular to AB. Let it be f. Relative to A , D moves around a circle of centre A and radius AD. Since initially D is stationary in this relative motion, its acceleration relative to A is directed at right angles to AD. Let it be a. D's initial acceleration relative to a fixed observer is the vector sum of this acceleration relative to A and A 's initial acceleration. Resolving horizontally and vertically for the forces acting on the particles at A and D and also for their accelerations, we obtain the equations I 1 T = y 2 mf, mg y' 2 1 1 T - Q = 2mf, .y 2 .y 1 Q = 2mf, .y mg = m
(J2 ! + a) ·
Adding the first three equations, we find that y2 f = a g.
Whence, from the first equation, T = 2 y' 2mgf3. = 2 : 3.
T:
S
6.2. Vibration of Two Particles.
This proves that
Normal Modes
A particular particle system whose motion can be discussed by the separate consideration of the equations of motion of the individual particles is that comprising a string of negligible mass stretched between two fixed points A and B and a number of particles fixed to the string at points along its length. We shall consider the case of two particles P and Q of masses m1, m2 respectively, free to vibrate in a horizontal transverse direction (Fig. 6.1). We shall assume that the vibrations p
A
a
- - - - -
I lx I
L
- - - - - - -
1
�
oV
c
- -
FIG. 6.1 .-Transverse Vibrations of Particles
8
are of small amplitude so that the lines of motion of the particles are both perpendicular to A B and the variations in the lengths a, b, c, of the three parts of the string are negligible. It follows that the tension T remains constant during the motion over the whole length of the string. If e, q,, if; are the inclinations of the three parts of the string to A B as shown in the figure, when the displacements of the particles from their equilibrium positions are x and y, the equations of motion are m/i = -T sin e - T sin q,, m2Y = T sin q, T sin if;.
-
134
A C O U R S E IN A P P L I E D MATHEMAT I C S
[cH.
= xfa, sin if> = (x - y)fb, sin tj; = yfc. Hence (D2 + p)x - ry = 0,} (6.l) -sx + (D2 + q)y = 0, where P = T(a + b)jm1ab, q = T(b + c)jm2bc, r = Tjm1b, s = Tjm2b. Eliminating y between these equations, we obtain [(D2 + p)(D2 + q) - rs]x = 0 . (6.2) But sin e
The equation for the characteristic roots of this linear differential equation is ).4 + (p + q) ).2 + pq (6.3) - rs = 0. Solving for J...2 , we calculate that
)_2 = - HP + q) ± !{(P + q)2 - 4 (pq - rs)}t, (6. 4) = -t(P + q) ± t{(p - q)2 + 4rs}t . (6.5) The form (6.5) shows that both these values for ).2 are real. Also, + b + c) > pq _ rs = P(am1m 0 2abc and hence from the form (6.4) it follows that both values of ).2 are negative. We shall write ).2 = - (1)2, - !1 2• The characteristic roots are then ±iffi, ±in and the general solution of equation (6.2) is x = A sin(ffit + ) + B sin( n t + �), (6.6) A, B, � being arbitrary constants fixed by the initial conditions. Substituting for from equation (6.6) in the first of equations (6.1), we now find that - Q 2 B sin(n t + �), - (1)2 A sin(ffit + ) + p-y = p-r r = (J.A sin(ffit + ) + vB sin ( n t + �) . (6.7) where !J. = (p - (1)2)/r, v = (p - !12)/r. ot ,
ot
x
ot
ot
If now the initial conditions are so chosen that B = 0, the oscilla tions of the system are determined by the equations
x = A sin(ffit +
)
ot ,
y = !J.A sin(ffit +
)
ot .
(6.8)
In these circumstances both particles oscillate with simple harmonic motions, each of frequency (1)/2rr:. Moreover, throughout the motion y = !J.X, i.e., the particles' vibrations are in phase or in anti-phase with one another according as !J. is positive or negative respec tively. Both particles pass through their equilibrium positions on AB at the same instants and arrive at the extremes of their paths to gether. Such a simple form of oscillation of the system is referred to as a normal mode. By choosing the initial conditions so that A = 0,
6]
M O T I O N O F A PART I CL E S Y S T EM-I
135
the system will be set oscillating in a second normal mode, this time of frequency D.f2rr:, viz., (6.9} x = B sin(nt + �), y = vB sin(nt + �).
Any other mode of oscillation for which neither A nor B is zero is governed by the equations (6.6), (6.7). It may clearly be regarded as the resultant of two oscillations conducted in the normal modes and proceeding simultaneously. In any particular case, having obtained the equations of motion (6.1), it is preferable to seek for a solution corresponding to a normal mode than to calculate the general solution in the manner described above. Thus, suppose that a = b = c, m1 = m2 = m. Then p = q = 2r = 2s = 2Tjma = 2n2 and the equations of motion are
(D2 + 2n2)x - n2y = 0,} (6.10) - n2x + (D2 + 2n2}y = 0. Let x = A sin(wt + ) y = C sin(wt + ) represent a normal mode. Substituting in the equations (6.10), we obtain (2n2 - w2)A - n2C = 0,} (6.11) - n2A + (2n2 - w2)C = 0. This pair of equations can only possess a non-zero solution in A and oc ,
oc
c if
(6.12)
i.e., if
(6.13)
Thus w2 = n2 or 3n2 and w = n or y'3n. Equation (6.12) accordingly determines the frequencies nj2rr:, y'3nf2rr: of the two normal modes. If w = n, either of equations (6.11) shows that C = A and the normal mode is given by the equations oc
(6.14) x = A sin(nt + ) = y. This mode of vibration is illustrated in Fig. 6.2 (a). If w = y'3n, we find that C = -A and the normal mode is deter
mined by the equations
x = A sin(y'3nt + ) = -y. This mode is illustrated in Fig. 6.2 (b). oc
(6.15)
Any other mode of vibration can be represented as the sum of two normal modes. Thus, in the case we have been considering the general solution of the equations of motion is
x = A sin(nt + ) + B sin(y'3nt + �).} y = A sin(nt + oc) - B sin(y'3nt + �). oc
(6.16)
A C O U R S E I N A P P L I E D M A T H E MA T I C S
1 36
[CH.
the arbitrary constants A, a occurring in the equations (6.15) having been replaced by B, � respectively, since the amplitudes of the two component modes are not necessarily identical and neither are their phase angles related in any way (cf. equations (6.6), (6.7) ) .
8
A
(a)
B
A
(b)
FIG. 6.2.-Normal Modes of Vibration
A light string of length 7af5 is fixed at one end and carries a particle of mass 4m at the other. A second light string of length a has one end attached to this particle and a second particle of mass 3m is attached to the other end. The system makes small oscillations in a vertical plane under gravity. Dis cuss the normal modes of oscillation. Let 6, cp be the inclinations of the two strings to the vertical at any instant and let x, y be the dis
Example 3.
placements of the upper and lower particles respectively from their equilibrium positions at be the tensions in the same instant. Let the upper and lower strings respectively. We shall assume that the vertical motions of the particles may be neglected. Hence, resolving vertically for the forces on each particle, we obtain the equations cos 6 = + cos cp, T cos q, = Since 6, cp are small, we shall approximate to the values of cos 6 and cos cp by unity. Thus r = = ' The equations governing the horizontal motions ;- --- - - - -1 If of the particles are I = sin q, sin 6, 3 mJ = sin q,. Since sin 6 = sin cp = these equations may be written (i) = + + + = (ii) where = Let a normal mode be determined by the equations = sin + a) , = sin + a) . Upon substitution of this solution into equations (i) and (ii), we obtain = + = These equations have a non-zero solution in and only provided = + = i.e., if
S, T
S
4mg T 3mg.
T 3mg, S 7mg.
4mi T - S 3mji - T 5xf7a, (y - x)fa, (4D2 8n2)x - 3n2y 0, -n•x (D2 n2)y 0, n2 gfa. x A
(wt y B (wt (8n2 - 4w2)A - 3n2B 0, -n2A (n2 - w2)B 0. A B (8n2 - 4w2)(n2 - w2) - 3n4 0, 4w4 - 12n2w2 5n4 0.
Q
6]
M O T I O N O F A PARTI CLE S Y S T E M- I
1 37
Hence w = or If w takes the first ,value, it will be found that corresponding normal mode is
A : B = 1 : 2, and the t x = A sin ( �� + •+ y = 2A sin ( � + 0<.) · 2 This mode is illustrated in diagram (a). nfy'2 ny'(5f2).
If
w
(a)
takes its other value, then
(b)
A : B = 3 : -2 and the normal mode is �f ( nt + �) . y = -2C sin ( �f nt + � ) · x= 3C sin This mode is illustrated in diagram (b)
0
If a system has two normal modes of vibration whose frequencies differ little from one another, when both modes are excited simultaneously their interaction can lead to the phenomenon of sympathetic vibration. Thus, consider the system built as follows. A light rectangular frame of sides a and b is smoothly hinged along its horizontal edge b. To its other edge b, two strings of the same length l are attached, and these carry particles both of mass m at their lower ends. The strings are set swinging in parallel, vertical planes perpendicular to the plane of the frame. Let e, 4> be the inclinations of the strings to the vertical at any I instant and let if; be the inclination of the frame to the T 1 vertical at the same instant (Fig. 6.3). These angles - - -! J will be assumed to remain small during the motion. For the purposes of this analysis, we shall suppose the my m'J frame replaced by a light string OK, of length a, to 6.3.-Sym which the pair of length l are attached at its lower FrG. pathetic Vi extremity K. A sufficient gap is supposed to exist brations _ _ _ X
138
A C O U R S E IN A P P L I E D MATHEM AT I C S
[cH.
between this pair of strings to permit their vibrating side by side with out touching. Let S, T be the tensions in the lower pair of strings and let P be the tension in the upper. The knot K is of negligible mass, and hence the forces acting on it must be in equilibrium. Resolving vertically for these forces, we obtain P = S + T, since cos e, cos ¢>, cos if; are all unity to the first order in e, ¢>, if;. Assuming the vertical motions of the two particles to be negligible, we also obtain T = S = mg. Hence P = 2mg. Taking the horizontal components of the forces acting on K, we find that
P sin if; = T sin () + sin ¢>, 2 sin if; = sin () + sin ¢>.
or
(6.17)
Let x and y be the horizontal displacements of the particles from the vertical through 0 and let z be the horizontal displacement of K from the same line. Then
l sin e, y z = l sin ¢>. (6.18) and hence, from equations (6.17) and (6.18), we find that . () x (2l + a) - ay sm. ,.�. - y( 2l + a) - ax (6.19) sm 2l(l + a) 'I' 2l(l + a) z =
a sin if;, x
-
-
z =
_
_
'
·
The equations of motion of the particles resolved horizontally are
(6.20) mx = - T sin e, my - S sin ¢>. In view of equations (6.19), these are equivalent to {D2 + g(2l + a)}x - ga Y - O, (6.21) 2l(l + a) 2l(l + a) + a)} (6.22) - 2l(lga+ a) x + {D2 + g(2l 2l(l + a) Y = 0 Let = A sin(wt + <X), y = B sin(wt + <X), (6.23) specify a normal mode. Substitution in equations (6.21) and (6.22) =
_
x
shows that
{g(2l + a) } ga 2l(l + a) - w2 A - 2l(l + a) B - O , - ga A + {g(2l + a) - w2} B 0 · _
2l(l + a)
For a non-zero solution in
2l(l + a)
A and
B,
}2 {g(2l + a) 2l(l a) - w 2 +
=
(6.24) (6.25)
w must satisfy =
g2a2 4l2 (l + a)2
(6.26)
6]
M O T I O N O F A PART I C L E S Y STEM-I
w2 = gjl or gj(l + a) . 1 -1 and 1 1 respectively.
139
The corresponding ratios A B are It is left as an exercise for the reader to examine the characteristics of these two modes. The general solution of the equations (6.21) and (6.22) is now seen to be (6.27) x = A sin (nt + IX) + C sin (pt + �),
Thus
(6.28) y = A sin (nt + IX) - C sin (pt + �), where n2 = gj(l + a) and p 2 = gjl. Suppose that initially one particle is displaced a distance h from the vertical through 0, the other particle lying on this vertical and the system is then released from rest. Then x = h, :X = y = y = 0 at t = 0 and the appropriate form of equations (6.27), (6.28) will be found to be x = !h(cos nt + cos pt) = h cos HP - n)t cos!(P + n)t, (6.29) y = !h(cos nt - cos pt) = h sin t(p - n)t sin t(p + n)t. (6.30) Suppose a is small compared with l. Then p-n=
JH1 - ( 1 + ]r1} = itJf
(6.31)
approximately and the difference between the frequencies of the normal modes is small. The sinusoidal functions cos HP - n)t, sin t(p - n)t are then of small frequency, i.e., oscillate only slowly in value. Equations (6.29), (6.30) accordingly indicate that x and y oscillate in SHM with angular frequency !(P + n) and slowly changing amplitudes h cos !(P - n)t and h sin HP - n)t respectively. When x's amplitude is at its maximum h, y s amplitude is zero, and vice versa. An observer will therefore witness a slow transfer of oscillation from one particle to the other and back again indefinitely. As cos t(p - n)t, sin t(p - n)t go through a complete cycle of values, four such transfers take place. The time for one transfer is therefore '
1t
21tl t l (6.32) p - n - aJi - a T' by the use of equation (6.31), T being the period of oscillation of a simple pendulum of length l. _
_
6.3. Energy Equation for a Particle System
For any particle of a system we can write down an equation of work (see equation (3.51)), viz., increase in KE
=
work done by the forces acting.
If we write down one such equation for the motion of each particle of the system over a certain period of time and then add all the equations
140
A C O U RS E I N A P P L I E D MATHEMAT I C S
(CH.
together we obtain an equation which refers to the whole system, viz., total increase in KE of the system = total work done by all forces operating on the system.
(6.33)
It is convenient to divide the forces operating on such a system into two classes. Firstly, there are those forces which arise from the action of agents external to the system. Thus, if the system comprises a number of interconnected particles falling under gravity the gravi tational forces are due to an agent external to the system, viz., the Earth. Such forces are therefore called external forces. Secondly, there are those forces which are caused by the interactions between the particles of the system. These forces are governed by Newton's Third Law and are referred to as internal forces. This classification is convenient, but is not imposed by any fundamental difference between the natures of these two types of forces. In fact, by increasing the scope of the system, it is always possible to transfer forces from the external to the internal category. Thus, in the case of a system falling under gravity, by enlarging the system to include the Earth the gravi tational forces become internal forces. The solar attraction is an external force if the system being considered is the Earth, but is an internal force relative to the whole solar system. It follows from Newton's Third Law that the internal forces of a system occur in equal and opposite pairs, and it might be expected that in any motion of the system the work done by one force of a pair would be cancelled by the work done by the .other force, so that the internal forces could be neglected when writing down equation (6.33). How ever, the motions of the particles to which such a pair of forces are applied are not necessarily identical, and hence neither are the works done by the forces. On the other hand, there is a case of great practical importance when we are justified in such a neglect of the internal forces. This is when the particles of the system form a rigid body, i.e., the distance between any particle pair remains fixed during the motion. Suppose P and Q are any two particles of the system. When the latter undergoes any displacement the motion of Q relative to P must be along an arc of a circle having centre at P. Thus Q's displacement is compounded of a displacement along the circular arc together with the displacement of P. We shall suppose that the equal and opposite forces F between P and Q act along the line PQ. The work done by F acting on Q is the sum of the works done by this force over the two displacements into which that of Q has been resolved. Since the motion over the circular arc is always at right angles to the direction of F, no work is done by F in this displacement. The remaining component of Q's motion is the same as that of P, and the work done by F acting on Q in this motion is therefore the negative of the work done by F acting on P. The total work done is accordingly zero.
6]
M O T I O N O F A PA R T I C L E S Y S T E M - I
141
Again, if two bodies of a system are in contact with one another they will exert equal and opposite forces upon one another at the point of contact and, in any displacement of the system for which there is no slipping between the bodies, the works done by these forces will cancel out, since their points of application are always identical and undergo the same displacements. It will often be the case that the work that is done by the forces of a system (internal and external) as the latter moves from one con figuration to another is independent of the mode of motion between the configurations, provided only that such a motion would not cause a rupture in the bodies forming the system. For example, consider the R
c
A
B
FIG. 6.4.-Simple Conservative System
system shown in Fig. 6.4. This comprises a rigid bar AB, at one end of which is a ring A sliding on a smooth, horizontal wire and at the other end is attached an elastic string BC attached to a point C of the wire. In any displacement of the system in which neither the bar nor the string is ruptured and the ring is not removed from the wire, the only forces which contribute to the total work done are the weight forces acting on the particles of the bar and the internal forces of the string. The reaction R of the wire on the ring acts vertically and, since the motion of the ring is horizontal, clearly performs no work. The in ternal forces of the bar do no work, since the bar is a rigid body. As the system moves from one configuration to another the work done by the internal forces of the string depends only on the difference between the string's extensions in the two positions and, if M is the mass of the bar, the work done by the gravitational forces is the product of the total
[cH.
A C O U R S E IN A P P L I E D MAT HEMA T I C S
142
weight Mg and the vertical displacement of the centre of mass of the bar G (see below for proof). Hence, the total work done by the forces of the system is independent of the mode of motion between the two con figurations. A system of this type is said to be conservative (cf. p. 71). The construction of a system may be such that during its motion certain points are caused to move along specified paths. For example, in the system of Fig. 6.4 one end of the bar A is forced to move along the horizontal wire. Such prescribed motions are said to be due to constraints, and the system, of which AB is a part, is said to be con servative relative to motions which do not violate the constraints. When dealing with a conservative system it is convenienient to introduce a Potential Energy function V The PE of a conservative system in any position is defined to be the work which is done by the forces of the system, internal and external, if it is moved from that position to some standard or datum position in such a manner as not to violate the constraints. Suppose that a conservative system moves under the action of certain forces from a configuration which we shall denote by A to an other we shall denote by B. Let VA, VB be its respective potential energies in these two positions. Let D be the datum configuration. If the system were moved from the configuration A to the configuration D the work done by the forces of the system would be VA· If this displacement were followed by another from D to B the work would be - VB · Hence the work done as the system moves from A to B in any manner is VA - VB· This will accordingly be the work done by the forces in the actual motion from A to B. Let TA be the KE of the system in the configuration A in the actual motion and TB the KE in the configuration B. By equation (6.33) TB - TA = vA B, TA + vA =:= TB + vB, (6.34) or i.e., the total energy of the system remains constant during the motion. We shall often require to know the contribution to the PE of a system of weight forces acting on the particles of a body included in the system. Suppose the body comprises particles of masses mv m2, mn, and suppose that at some instant these are situated at points at heights z1, z2 , Zn respectively above some fixed horizontal plane. The sum of the PEs of these particles relative to the reference plane as datum is -
v
•
•
•
•
+
mngZn
n
= g L m;Z;. i= 1
But, if z is the height of the CM of the body above the reference plane, Im;z; = Mz, where M is the total mass of the body (see eqn. (11.28)) . Hence
V = Mgz.
(6.35)
6]
M O T I O N O F A P A R T I C L E S Y S T E M-I
143
This equation indicates that the PE may be calculated by supposing the whole mass of the body is concentrated at the CM. We will now solve two problems by the use of the energy equation.
Ox, Oy are two smooth, straight wiresfixed perpendicular to one another at Oy being vertically downwards. To each end of a light rod of length a, a ring of mass m is attached and the rings slide freely oni the wires. The bead on Oy is projected downwards from 0 with velocity (2ga) . Show that a time (ga) l log tan 831T elapses before the other bead arrives at 0 and find its speed of arrival.
Example 4. 0,
mg 'f
Q
Let e be the angle made by the rod with at any instant. Let x, y be the distances of the particles from 0 (see diagram) . Then (i) sin e, COS (). The system is conservative and its PE is cos e. Differentiating the equations (i) with respect to the time, we obtain (ii) X cos M, sin ee. These are the speeds of the rings. The KE of the system is accordingly x• + • • (cos• e + sin2 e)62 •e•. Initially the PE is zero and the KE is the bead on being stationary. Hence the energy equation is cos e + cos e) = 4g cos• te, (iii) 6 1 cos te,
X=a
=a
tm
tmy = tma
Oy y=a -mgy = -mga y = -a = tma tm(2ga) = mga, = mga,
Ox
tma262 - mga a6• = 2g(l = - 2 (!) 6 being clearly negative. When e = 0, 6 = -2(gfa)t and hence, from equations (ii), x = -2(ga)l. The speed of arrival of the bead on Ox at 0 is therefore 2(ga)l.
1 44
[CH.
A C O U R S E I N A P P L I E D M A T H EMAT I C S Writing equation (iii) in the form
dt ( a) 11 de = - ! g sec !6,
and integrating with respect to time of the motion,
e
over the range (!7T, 0) we obtain for the
A particle A of mass m moves on a smooth, horizontal table and is con nected by a light, inextensible string passing through a smooth hole 0 in the table to a particle B of the same mass m, which moves along the vertical through 0. Initially B is at rest and A is distant a from 0, moving with velocity y'(gaf3) perpendicular to OA. Show that in the subsequent motion the distance r = OA lies between a and ta. Show also that the tension in the string is mg ( 3 + �) . 6 r3 The forces acting on the particle A are the tension T in the string, its weight mg and the smooth reaction of the table R. The last-mentioned forces cancel, there being no vertical motion of A. Resolving in the hori zontal direction perpendicular to OA for the particle A, we obtain the equation m d (r2o)" = 0 or r•e. = h (a constant) . (i) r lit Initially r = a, rO = (gaf3)i and hence h = a(gaf3) l .
Example 5.
R
0 T 8
•"9
l! L r
r
A
The system comprising the two particles and the string is conservative, the internal forces between particles of the string doing no work in any dis placement, since the distances between them remain invariant. Taking the datum position of the system to be that in which is at 0, the PE of the system when = will be If 6) are polar coordinates of its velocity is r + and its KE is accordingly + If is the length of the string, The vertical velocity of is = -r downwards. The KE of is therefore We can now write down the energy equation, viz., + + + constant, + 2r• + 2 = constant . . or (ii)
A OA r mgr. (r, A, ( 2 r2(J2)l !m(r2 r202). l OB = l - r. B d(OB)fdt B !mr2• tm(r2 r202) tmr• mgr = r202 gr
6]
M O T I O N OF A PART I C L E S Y S T EM-I
1 45
Initially = r = and = It follows that the value of the constant in equation (ii) is Eliminating from equation (ii) by the use of equation (i), we now find that _§_ (iii) '
r a, (J
0
r6 (gaj3)l. 7gaj3.
r2 = 6r" (7ar2 - a• - 6r3) (a - r)(2r - a)(3r + a). 6�2 But r2 must be positive and g(3r + a)j6r2 is certainly of this sign. Hence ta � r � a. Also, r is only zero when r = ta or a. It follows that r must oscillate between these two values (see p. 96) . Since OB = l - the acceleration of B downwards is r The equation of motion of B is therefore (iv) T - g mr. =
r,
-
m
.
=
Differentiating equation (iii) with respect to t, we obtain
2rr =
g (;;. - 1) r.
Whence r Substituting in equation (iv) and solving for the result stated in the question. .
T, we now obtain
6.4. Kinetic Energy of a Rigid Body
Before we can write down the energy equation for a system com prising one or more rigid bodies we must find a method of calculating
FrG. 6.5.-Rotation about a Fixed Axis
the KE of such a body when it is moving in any manner. We shall restrict our attention to the case of a rigid body, all particles of which are moving parallel to some fixed plane (i.e., the case of two-dimensional motion). As a preliminary to the general discussion, consider the case of a rigid body rotating about a fixed axis. Let P be any particle of the body of mass m and let PO = r (Fig. 6.5) be the perpendicular from P
1 46
A C O U R S E I N A P P L I E D MATH EMAT I C S
[CH.
on to the axis of rotation. If w is the angular velocity of the body at the instant under consideration, P is moving around a circle of centre 0 and radius r with this angular velocity, and its speed is accordingly wr. The KE of P is therefore �mw2r2• Summing over all the particles of the body, we obtain KE of body y
�w2Imr2 = tJ w2,
(6.36) where I = Imr2 is the moment of inertia (MI) of the body about the axis of rotation (Chapter 7).
=
Iimw2r2
=
As a particular example of the use of this formula, suppose the rigid body is free to rotate about a horizontal axis through 0. Let G be the CM of the body and let OG = h (Fig. 6.6). If the pivot at 0 is smooth the action of the bearings on the axle can be represented by a single force R at 0. Let ( Y, X) be the components of this force along and perpendicular to GO respectively. The only other external force acting on the body is the weight Mg acting at G. Since R does no work in any displacement con FIG. 6.6-The Compound sistent with the constraints, the system .is Pendulum conservative and, if the datum position is taken to be that in which OG is horizontal, the PE is - Mgh cos 6. Let I be the MI of the body about the axis through 0. Then the energy equation is
tJ62 - Mgh cos 6
=
constant.
(6.37)
Suppose that the body is displaced from its equilibrium position so that 6 = IX and then released from rest. It will clearly oscillate as a pendulum. The system is called a compound pendulum. Initially we have e = 0 and 6 = IX. Hence the constant in equation (6.37) is -Mgh cos IX and
62 =
2�gh (cos 6 - cos
IX .
)
(6.38)
If IX is small, then so is 6 throughout the motion and cos 6 - cos IX = t(1X2 - 62) to the second order of small quantities. Hence, in these circumstances the motion is governed approximately by the equation
(6.39) We have already proved (equation (2.26)) that a point executes SHM of amplitude a and period 2rr:f w along a straight line if its coordinate
M O T I O N O F A PA R T I C L E S Y S T E M - I
6]
147
.i2
X is governed by the equation = Equation (6.39) therefore shows that the angular motion of the compound pendulum is approximately simple harmonic of amplitude tx and period
T = 2rrJJgh .
(6.40)
Comparing this result with equation (3.68), we observe that the period of the compound pendulum is the same as that of a simple pendulum of length IjMh. A simple pendulum of this length is called the simple
equivalent pendulum.
The axle of a wheel is supported horizontally in smooth bearings. A chain of length l and mass m per unit length has one end fixed to the axle and is wound around it. To the free end of the chain is attached a particle of mass equal to that of the chain. Initially this particle is on the level of the axle and the wheel is stationary. The chain begins to unwind. If I is the moment of inertia of the wheel and axle and r is the radius of the axle (assumed small), show that the length of chain unwound after a time t is 2l siuh •>..t, where 4>..2(I + 2mlr2) = mgr2 • (L.U.) Let x be the length unwound after a time t.
Example 6.
The system is conservative. Taking the level of the axle as the datum for the purpose of calculating the PE, the CM of the hanging G part of the chain is at distant tx below the datum level. The weight of this portion of the chain is mgx. Hence its PE is - imgx•. The PE of the remainder of the chain and of the wheel is zero. The PE of the particle is -mlgx. The velocity of the particle and of all the links of the chain is %, and hence their ml contribution to the KE is mlx2• The angular velocity of the axle is xfr, and the KE of the wheel and axle is accord ingly tJ(xfr) 2 • The total energy is initially ze:ro. Hence the energy equation is
G,
F
(�)
2
+ mlx• - imgx2 - mlgx
or x• 4>..2 (x 2 + 2lx), where >.. is defined in the question. Writing (i) in the form
=
= 0,
dx = 2>..dt, {(x + l)" - l"}!
we integrate to obtain 2>..t
When t = 0, x or
=
= cosh-1 X-+-l + A .
0 and hence A X+l
l
= 0.
Thus
-- = cosh 2At, l x = l (cosh 2>..t - 1) = 2l sinh2 >..t.
(i)
148
A C O U R S E IN A P P L I E D M A T H E M A T I C S
[CH.
Before commencing consideration of the calculation of the KE of a rigid body in general two-dimensional motion, we shall deal with the general case of a system of particles executing any motion whatsoever. Let m1, m2, rn mn be the masses of the particles and let rv r2 , be their position vectors relative to a fixed origin 0. Also, let Pv p2 , Pn be the position vectors of the particles relative to G, the --+ mass centre. Then, if OG = r, •
•
(6.41) ri = Pi + r, and thus ri = Pi +r. But i:i is the velocity of the particle mi. Hence, the total KE of the system is given by
n
T = ti=�1mii'2i = t�m;(Pi + r). 2
= !�mipi2 + !�mii2 + �mipi i = t�miPi2 + tr2�mi + r �miPi· ·
·
(6.42)
Since the mass centre of the system lies at the origin of the position vectors pi, it follows from equation (11.29) that
�m,pi = 0,
(6.43)
and, by differentiation with respect to the time, that
�mipi = 0.
(6.44)
Hence equation (6.42) may be written
T = t�mipi2 + tMr2, (6.45) where M = �mi. Now p; is the velocity of m; relative to G. Thus the first term in the right-hand member of equation (6.45) represents the KE of the motion of the system relative to G. If we imagine the whole system con densed into a single particle of mass M at the centre of mass and given the velocity f of this point, its KE would be tMr2 • This provides us with an interpretation of the second term of the right-hand member of equation (6.45). We have therefore proved that the KE of a system
is equal to the KE of the motion relative to the CM together with the KE of a particle of mass equal to that of the whole system and moving with the CM. In the particular case of a rigid body in motion parallel to a plane, let V be the velocity of the centre of mass and w the angular velocity of rotation about G. The motion relative to G is a simple rotation about this point and, by equation (6.36), the KE of such a motion is tJ0w2 , where I is the MI of the body about G. Thus the total a
KE of the rigid body is given by
(6.46)
6]
M O T I O N O F A PA R T I C L E S Y S T E M - I
149
A
uniform circular cylinder, of mass M and radius a, carries a particle of mass m fixed in its surface. It is placed on a rough horizontal table with the particle in the highest position. If the system is slightly disturbed and the cylinder rolls without slipping, prove that when it has turned through an angle a
Example 7.
ae•{fM + 2m(l + cos a)}
= 2mg(l
-
cos 6) . (L.U.)
R is the normal component of the reaction of the plane on the cylinder and F is the frictional component. As the cylinder rolls, successive particles on its surface come into contact with particles of the plane. However, since there is no slipping, these particles do not move relative to one another during contact, and no work is done by the reaction forces between them. Thus neither R nor perform any work during the motion. The remaining external forces acting on the system " cylinder + particle " are the weight of the cylinder Mg and the weight of the particle mg. The system is con servative, with PE mga cos a (the datum configuration is with OP horizontal).
F
m
a.e
'
'
'
'
'
' '
'
'
The KE of the cylinder alone is the KE of a particle of mass M moving with 0 together with the KE of the rotary motion about 0. In the position a. 0 has moved a horizontal distance aa from its initial position and its speed is therefore ae . The contribution to the KE of the particle at 0 is accordingly !Ma• e•. The MI of the cylinder about its axis through 0 is !Ma2 and its angular velocity is e . The KE of the rotary motion is therefore !Ma•e•. The net KE of the cylinder is now seen to be !Ma•e•. Now consider the particle. Relative to 0 its velocity is ae perpendicular to OP. Adding O's velocity ae vectorially to this, we obtain P's velocity v relative to a stationary observer (see right-hand diagram) . By the Cosine Rule, v2 a•e• + a•e• + 2a•e • cos a 2a•e•(I + cos a),
= =
and hence the KE of the particle is ma262(1 + cos a) . We can now write down the energy equation of the system, viz., !Ma•e• + ma2t'l 2 ( l + cos a) + mga cos a = constant.
When a =
0, e = 0 and hence the constant is equal to mga. ae2{!M + m(l + cos 8)} = mg( l
which is equivalent to the equation stated.
-
cos a),
Thus
150
A C O U R S E IN A P P L I E D M A T H E MA T I C S
[cH.
A
wheel of mass M and radius a is caused to move along a horizontal straight line without slipping at a constant speed V under the action of a horizontal force P applied at its centre 0. The distance of G, its CM, from 0 is b. Show that when OG makes an angle 6 with the downward vertical, Mgb V" P= sin 6. + a ga (L.U.)
Example 8.
(1
)
It follows from equation (6.33) that the rate at which the forces of a system do work is equal to the rate of increase of its KE. During the motion of the system being considered, only the forces P and Mg do work. To find the rate at which these forces are working, we employ equation (2.9) . P is doing work at the rate P V. The angular velocity of the wheel is Vfa and hence, relative to 0, G has velocity b Vfa perpendicular to OG. The
'
F
\
\
\
\
\
\
\
\
\
\
velocity of G relative to a stationary observer is found by combining this velocity with that of 0, viz., V horizontally. This has been done in the right-hand diagram to give the velocity v. The vertical component of v is observed to be b V sin 6fa, and it follows from equation (2.9) that the rate at which Mg is doing work is -Mgb V sin 6fa. The net rate at which work is being done by the forces of the system is therefore PV -
Mgb V sin 6. a
(i)
Since the angular velocity of the wheel does not change, the rate of change of the rotary component of the KE is zero. We have b2 v• = v• + ii2 v•
- 2b v• cos e, a
so that the KE of a particle of mass M moving with G is tMV2
[1 + a•� - 2ba cos e]
and the rate of increase of this component of the KE of the wheel is clearly
.;
M V2 � sin 6 e = M V3 sin 6, a a
(ii)
since e = Vfa. Equating the expressions (i) and (ii) according to the principle previously explained, we obtain the result stated. Two equal rods AB, BC of length 2a are smoothly hinged at B. The rod AB is smoothly pivoted at to a point on a smooth horizontal plane in such a way that both rods are free to move in a vertical plane through the pivot. The end C of the rod BC slides on the smooth plane and is connected by a light, inextensible string which passes through a smooth hole in the table at A to a
Example 9.
A
6]
MOTION OF A PARTICLE SYSTEM-I
151
particle hanging vertically below A . If the mass of the particle i s half the mass of either rod and the inclination of AB to the horizontal is initially rr/6, show that C can only move to A if it is given an initial velocity v towards this point, where 6ga v2 > 5 (2y2 - y 3 1) . -
Prove also that if v is just sufficient to permit C to move to A , then its velocity of arrival at A is V, where v• = 2l ga(v'2 - 1 ) . Let 2 a be the length of the rods, 2 m their mass and let a be their inclination
to the horizontal at any instant. The system is conservative. The PE associated with the weight forces acting on the bars is 4mga sin a. The weight of the hanging particle P is mg and its PE is -mg . AP = -mg(l - A C) -mg(l - 4a cos a), where l is the length of the string. The net PE of the system is accordingly (i) 4mga(sin a + cos a), where we have neglected a constant component -mgl, since this can be absorbed into the constant appearing in the energy equation.
=
B
p
The bar AB rotates about a fixed axis and its MI about this axis is 8ma2f3. By equation (6.36), its KE is therefore (ii) Taking horizontal and vertical axes A x, Ay as shown, let the CM of the bar BC, have coordinates (x, y) . Then X = 3a COS a, y = a sin a and hence the velocity components of are % - 3a sin a y = a cos a (J, and its speed is therefore a6 (9 sin2 a + cos2 a)! = ail (l + 8 sin2 a)t.
G,
=
(J,
G
152
A COURSE I N APPLIED MATHEMATICS It follows that the KE of a particle o f mass 2m moving with G is
[CH.
ma262(1 + 8 sin2 e) . This is one component of the KE of BC. The contribution of the rotary component is ma262f3. The total KE of BC is accordingly tma•e•(l + 6 sin• e) . (iii) Now A C = 4a cos e and hence, by differentiation, we find that the velocity of P is - 4a sin e () upwards. Thus the KE of this particle is 8ma•e• sin2 e. (iv) Combining the expressions (i)-(iv), we now obtain the energy equation, viz., tma202(1 + 6 sin2 e) + 4mga(sin e + cos e) constant, or a202(1 6 sin2 e) + fga(sin e + cos e) = constant. (v) The velocity of C at any instant is the same in magnitude as that of i.e., -4a6 sin e. Initially, e = TT/6, and hence this velocity is then of magnitude 2a6. If V denoteS thiS initial Velocity, ae = tv When e = TT/6 and, by substitution of these values in equation (v), we calculate that the constant is given by constant = tv• + !ga(1 y 3). Hence a202(1 + 6 sin2 6) = fv2 + !ga(1 + v3) - fga(sin e + cos e) (vi) As C moves towards A , e takes all values in the interval (1r/6, TT/2) . Since the left-hand side of equation (vi) must always be positive, such a motion will be possible only if the right-hand side of this equation is positive for such values of e. This side of the equation takes its minimum value when e = t7T· This value is ;tv• - !ga(2y2 - y3 - 1) and it is positive provided v2 > tga(2y2 - y3 - 1). This then is the condition that C should be able to reach A. If v2 = 6ga(2y2 - y3 - 1)/5, equation (vi) may be written a202(1 6 sin2 e) fga( y2 - sin e - cos e), and hence, when (l i1r, a•()• 3ga( y2 1)/14. At this instant the velocity of C is 4a6 = V. Thus v• = 16a•e• = :l-,i·ga(v2 - 1).
=
+
P,
+
+ =
= =
-
6.5. Conservative Systems of one Degree of Freedom. Equilibrium. Small Oscillations
Stability of
The configuration adopted by a system of bodies, which can move subject to the limitations imposed by various constraints, at any instant during its motion, can usually be completely specified by stating the values taken at this instant by a finite number of independent quantities of a geometrical nature associated with the system and called its generalized coordinates. For example, the configuration of the system shown in Fig. 6.4 is determined by stating the magnitude of LCAB and the distance AC. This angle and this distance are independent quantities, since the value of one does not fix the value of the other,
6]
MOTION OF A PARTICLE SYSTEM-I
153
and they are accordingly convenient generalized coordinates of the system. Consider in this connexion Example 7, p. 149. If the angle e through which the cylinder has rotated is known, the position of every particle of the system is determined. e is a generalized coordinate of this simple system. Instead of e, we might choose the distance moved by the axis of the cylinder from its initial position as the coordinate of the system, since, this being known, the angular rotation of the cylinder can also be determined. We conclude that a set of generalized coordinates for a particular system can be chosen in many ways, but the number of such coordinates will always be the same and is called the number of degrees offreedom of the system. Consider a rigid body free to move in any manner parallel to a fixed plane. If G is its CM, two coordinates will be necessary to specify the position of G in its plane of motion. Having fixed the position of G, it will be necessary to state the rotation the body has undergone about G from some reference orientation before the position of the body is completely known. The number of generalized coordinates is accordingly three and the system has three degrees of freedom. Let e be the generalized coordinate of a conservative system having one degree of freedom. The PE of the system depends only upon the latter's configuration, and hence upon e. Thus, if V is the PE, then V = V(e) . Let m be the mass of any particle of the system and let (x, y, z) be its coordinates at time t referred to any fixed set of rectangular axes. The velocity components of this particle in the directions of the axes are (.X, y, z) and hence its KE is
tm(x2
+ y2 + z2).
But (x, y, z) are determined when the configuration of the system is known and hence x = x(e), y = y(e), z = z(e). Differentiating these equations, it follows that
.X = x'6, y = y'6, z = z'6, primes denoting differentiations with respect to e. Thus the particle's KE is lm(x'2 + y'2 + z'2)62 and the KE of the system is
!!m(x'2
+ y'2 + z'2)62 = !62!m(x'2 + y'2 + z'2) = !]62,
where ] = !m(x'2 + y'2 + z'2) is a function of e only. The energy equation of the system can now be written down in the form
!]62 + V = constant.
(6.47)
This equation is a differential equation of the first order determining e as a function of t, and hence determining the motion of the system. A conservative system having only one degree of freedom is therefore
1 54
A COURSE IN APPLIED MATHEMATICS
[CH.
of an especially simple nature, in that energy considerations alone suffice to determine its motion. Differentiating equation (6.47) with respect to t, we obtain the equation ]66 + U'63 + V'6 = o, or (6.48) Je + U'62 + V' = o. Suppose that an equilibrium configuration exists for which 6 takes the value ex. Then 6 = ex represents a possible ' ' motion ' ' of the system and hence satisfies equation (6.48). Substituting, and noting that 6 = e = 0, we find that
V'(ex) = 0.
(6.49)
This implies that the PE takes a stationary value in any position of equilibrium. Now suppose that the system rests initially in the equilibrium configuration 6 = ex and is then slightly displaced so that motion commences. Let 6 = ex + e: during the subsequent motion, where e: and E: are small quantities, at any rate during the early stages of this motion. Substituting for 6 in equation (6.48), we find that e: is governed by the equation
](ex + e:) e + U'(ex + e:) E:2 + V'(ex + e:) = 0.
(6.50)
In this equation we shall now neglect all small quantities of the second order. Thus, the second term of the left-hand member of the equation will be disregarded. Also, by Taylor's theorem,
(6.51) ](ex + e:) = J(ex) + e:J'(ex) + O(e:2), V'(ex + e:) = V'(ex) + e:V"(ex) + O(e:2), (6.52) = e:V"(ex) + O(e:2). To the first order, therefore, equation (6.50) is equivalent to ] (ex)€ + V"(ex)e: = 0, or (6.53) e: + V"(ex) J(ex) e: = 0 . Since tf62 is the KE of the system, J is positive for any admissible value of 6. The sign of the quantity V"(ex)/J(ex) is accordingly de termined by that of V"(ex). If V"(ex) > 0, equation (6.53) can be written (6.54) 2 where (i) = V"(ex)/J(ex) and, during the early stages, the motion of the ··
system is clearly approximately simple harmonic of period
T = 21tJ V" (ex)"
JM
(6. 55)
MOTION OF A PARTICLE SYSTEM-I
6]
155
During such a motion, e: remains small, and hence equation (6.53) remains valid indefinitely. In such circumstances, therefore, the system oscillates indefinitely about the equilibrium position, showing no tendency to move far away from the equilibrium con figuration. We say that the equilibrium is stable. For stability, we must have V"{oc) > 0. Taken in conjunction with equation (6.49) , this implies that the PE takes a minimum value at e = oc. Next, suppose that V"(oc) < 0, so that equation (6.53) may be written (6.56) where n2 = - V"(oc)/](oc) . The general solution of this equation is e: =
Aent + Be-nt ± as t -+
(6.57)
and hence, in general, e: -+ oo oo This implies that although e: is initially small, it does not remain so, and eventually equation (6.53) ceases to be a valid approximation to the equation of motion of the system. Clearly, in these circumstances, the system reveals a tendency to move away from the equilibrium con figuration when slightly disturbed, and we say that the equilibrium is unstable. In this case the PE takes a maximum value in the equili brium position. The intermediate case V" (oc) = 0 cannot be satisfactorily decided unless the effects of the second-order terms in equation (6.50) are taken into account. A , B, C, D are four points on a smooth, horizontal table which form the corners of a square whose diagonals are each of length 2d and whose centre is at 0. A particle of mass m is placed at 0 and is connected to A and C by two equal light, elastic strings, each of natural length l( < d), and connected to B and D by two equal light, elastic strings, each of natural length l'( < d), all four strings having equal moduli of elasticity A. If the particle is slightly displaced from rest at 0 towards C, show that the period of small oscil lations is 2m/A t. (D.U.) 'TT lfl + lfl' - lfd
Example 10.
If OP
Also
{
D;c------;lc
0
}
B
= x, the PE of the two strings AP and CP is A A A 21 (d + x - 1) 2 + 21 (d - x - l)2 = [(d - 1) 2 + x2] . I PD 2
(
= d2 + x2,
PD = d l +
where we have neglected terms O (x4) .
�t = d �' +
156
A COURSE I N APPLIED MATHEMATICS
[CH.
The PE o f PD o r PB i s accordingly
� ( d - l' + ;�r = 2�,[(d - l') 2 + ( l - �) x•}
2'
where we have again neglected a term O (x4) . The total PE of the system is now found to be V =
� [ (d - l)2 + x2] + � [(d - l') " + (r - �) x•}
The energy equation is therefore
,\ ( } + � - �) x• = constant, (! + .!:.l - !)d (constant - x2) x• = !mx• +
2,\ m l'
·
Comparing this with equation (2.26), we deduce that the vibration is approximately simple harmonic of period 27r/w where
(!
!)
+ .!:_ w• = � m l l' d ·
A uniform plank is of length 2l and thickness 2t. It is placed sym metrically across a rough cylinder of radius r, the axis of the cylinder being horizontal. Prove that if the plank is slightly disturbed so that it makes small oscillations (without slipping) the period of the oscillations is equal to the period of small oscillations of a simple pendulum of length 1• + 4t• " 3(r - t) Deduce the condition necessary for oscillations to be possible. (B.D.)
Example 11.
Let C be the point of contact of the plank with the cylinder before it is disturbed. Let A be the point of contact during the subsequent motion. If LAOB = e, since no slipping has taken place, A C = arc AB = r6. The height of the CM of the plank, above 0 is accordingly t cos e + re sin e + r cos e and the PE of the plank is V(6) = Mg{(t + r) cos e + r6 sin 6}, where M is the plank's mass.
G,
6]
MOTION OF A PARTICLE SYSTEM-I
157
At the instant under consideration the plank is rotating about A , the instantaneous centre (see Chapter with angular velocity e . The speed of G is accordingly AG e . The KE of a particle of mass M moving with G is therefore tMe • . A G• = tMe2 (r2B2 + 2 . The KE of the rotary motion about G is tM(l2 + •) e • Hence, the total KE of the plank is
7)
t .
tMe2(l2 +
It now follows that, in this case, But
t)
4t2 + 3r2B2) .
](B) = tM( " +
l 4t2 + 3r2B2).
V"(B) = Mg{(r
- t) cos B - rB sin B}. V"(O) = Mg(r - t), ](0) = tM(l2 + 4t2). Using equation (6.55), we can now compute the period of small oscillations about the equilibrium position e = 0. It is / l2 + 4t2 27rV 3g(r - t)' i.e., the period of oscillation of a simple pendulum of length (l2 + 4t2)/3(r - t) . If r < t, V"(O) is negative and B = 0 represents a position of unstable equilibrium. The condition for oscillations to be possible is therefore r > t. Example 12. A heavy, uniform chain hangs over a rough pulley consisting of a uni form disc of radius a, which can turn freely about a horizontal axis through its centre, and which has a particle of mass m attached to a point of its rim. The mass of a length 2l of the chain is equal to the mass of the particle. The particle is at the lowest point of the pulley when the lengths of chain hanging on each side of the pulley are the same. If the angu lar displacement of the wheel e is mea b-ae sured from this position, show that e = 0 is a position of stable or unstable equili btaS brium according as l is greater than or less than a, and discuss the stability of other positions of equilibrium that may occur if l > a. (M.T.) Let b be the lengths of chain which hang vertically in the position e = 0. In the displaced position the lengths of the hanging portions are b ae and b aB, as shown in the +diagram. The weights of these lengths are mg(b + aB)f2l and mg(b - aB)f2l respectively, and since their mass centres Hence
1 l
-
are at distances i(b + aB), !(b - aB) respectively below the centre of the disc, we can take the sum of their PEs to be
- mg (b + aB)2 - '!!.� (b � �
-
aB)2 =
-
mg (b2 + a2B2) �
0
158
(CH.
A COURSE IN APPLIED MATHEMATICS
Let P (independent of a) be the PE of the portion of the chain in contact with the pulley. The total PE of the chain is then p -
�f (b2 + a2a 2) .
When a = 0 , this PE i s P - mgb2f2l. The change i n PE o f the chain when the pulley rotates through the angle a is accordingly -mga2a2f2l. The change in PE of the particle as a result of this rotation is mga( l cos a), whereas there is no change in the PE of the disc. Measuring the PE from the datum position when a = 0, we obtain
-
mga2 a2 V = - --- + mga(l 2l
Differentiating,
we
���
find that
-
- cos a).
mga•a dV -- + mga sin a, = l da 2 m a = + mga cos a = mga cos a
�
(
- i)
.
(i)
When a = 0, d Vfda = 0, confirming that the datum position is one of equilibrium, and d2 V2/dfJ 2 = mga(l - a)fl. If l > a, d2 Vfdf:J 2 > 0 and this position is stable. If l a, d2 Vfdf:J 2 and this position is unstable. Other positions of equilibrium are given by roots of the equation d Vfd6 = i.e.,
0,
<
<0
sin a= 7 a.
(ii)
If l > a, the graph of aafl is a straight line through the origin of gradient less than unity. This curve therefore intersects the graph of sin a in points (see diagram) other than the origin 0. These points of P 1 , P 2 , P3 ,
intersection have absciss<e which are roots of equation (ii) and therefore correspond to equilibrium positions. The graph of sin a has gradient cos a at every point, whereas that of a6fl has gradient afl. The sign of the difference between these gradients at the points P 1, P2 , P3 , accordingly determines the sign of d2 Vfd6 2 and hence the nature of the equilibrium positions. Thus, it will be observed from the diagram that the points P1, P 2, P 3, correspond to unstable, stable, unstable, equilibrium positions respectively. There will also be a set of equilibrium positions in which a takes negative values.
6]
MOTION OF A PARTICLE SYSTEM-I
159
6.6. Stability of Rocking Bodies
A problem of stability of equilibrium which is conveniently introduced at this juncture is that relating to the equilibrium of a movable cylinder which rests under gravity with one of its generators in contact with a generator of a fixed cylinder. A right section of the two cylinders is shown in Fig. 6.7, C being a point on the generator of contact. Only two forces act upon the movable cylinder, viz., the weight force Mg through its centre of mass G and R, the reaction of the fixed cylinder. The movable cylinder can rest in equilibrium only if these two forces are equal and opposite and have the same line of action. Hence G is vertically above C. Suppose R makes an angle oc with the common normal at C. Then oc must be less than the angle of friction at this
FIG. 6.7.-Rocking Body
point, otherwise slipping will take place. We shall assume the co efficient of friction to be sufficiently large to permit the upper cylinder to rest in equilibrium. Consider the nature of this equilibrium relative to small rocking motions of the upper cylinder. If the latter is caused to roll on the lower cylinder without slipping so that the arc CA rolls on the arc CA ', A eventually making contact with A ', then arc CA ' = arc CA = ds. In the equilibrium position, let the tangent to the upper cylinder at A make an angle drp with the common tangent at the point of contact C and let the tangent to the lower cylinder at A ' make an angle drp' with this line. If p is the radius of curvature of the section of the upper cylinder at C, the arc AC is approximately an arc of a circle of radius Hence ds = pdrp. Similarly, p subtending an angle drp at the centre. ds = p 1 drp 1, where p' is the radius of curvature of the section of the lower cylinder at C. As the upper cylinder rolls, the tangent at A moves into coincidence with the tangent at A 1, and hence the angle of rotation is
drp + drp' = ds
G f,). +
(6.58)
A COURSE IN APPLIED MATHEMATICS [CH. For small angles of rotation, G moves along an arc of a circle having centre C (the instantaneous centre) and radius CG = h. The dis placement of G is accordingly h(dcf> + dcp 1 ) = hds (� + t�} (6.59) 160
and this displacement will be horizontal to the first order of small quantities. Let G1 be the displaced position of G. If G1 is to the right of the vertical through A 1, as shown in the right-hand figure, the weight will possess a moment about the new point of contact A 1 in a sense tending to roll the upper cylinder back towards the equilibrium position. This position is then stable. If G1 is to the left of the vertical through A 1, the weight will have a moment about A 1 in a sense tending to roll the upper cylinder farther away from the equilibrium position, which is accordingly unstable. Now the distance between the verticals through A and A 1 is approximately A 1 C cos ds cos Hence, for stability we must have
GG1 < ds cos
hds
or
(� + ;,) < ds cos !
i.e.,
<X,
p
+
� < cos p
h
<X.
<X =
<X.
<X,
(6.60)
Reversal of the inequality gives the condition for instability. If the lower surface is concave upwards, it is necessary to treat 1 p as a negative quantity. A uniform thin, hemispherical bowl of radius a rests in equilibrium on a fixed solid sphere with its outer curved surface in contact with the sphere so that the common normal makes an angle <X with the vertical. Show that cx must be less than 1r/6. Show also that, if the radius of the sphere is 3a, equili brium is stable only if sin ct < l f y'5.
Example 13.
The above argument is clearly applicable with only slight modification when the cylinders are replaced by spheres. If G is the CM of the hemispherical bowl and Q is its centre, then QG ta. G is vertically above the point of contact C, so that L QCG = ct . Applying the Sine Rule to 6 CGQ, we have
=
sin cx = But
g� sin L QGC = ! sin L QGC.
0 � sin L QGC � l and hence
i.e., cx � 1r/6.
O � sin cx � t,
6]
M O T I O N O F A PART I C L E S Y ST EM-I Let CG
161
Construct QN perpendicular to CG produced. Then CN - GN a cos "' - (!a2 - a2 sin2 <X)t, = a{cos "' - (! - sin• <X)l}. The condition for stability is l cos "' 1 < 3a a a{cos "' - (! - sin2 <X)l}' 4 cos "' - 4(! - sin2 <X)l < 3 cos "'• cos "' < 4(! - sin2 <X), - sin2 "' < 4 - 1 6 sin2 "'• sin2 "' < 3
= h. h
=
=
+ 1
15
Slll <X < .
V 5. 1
EXERCISE 6 1 . A triangular prism of mass M rests on a smooth, horizontal plane so that one of its faces is vertical and another inclined at an angle ex to the horizontal. At the mid-point of a horizontal line on the inclined face rests a rough particle of mass m, the coefficient of friction between the particle and the prism being tan ex. If the prism is pushed by a hori zontal force P applied symmetrically at right angles to the vertical face, show that the particle can never slide downwards. If M = 2m, ex 30° and P 4mgy3, show that the particle will slide up the inclined face with an acceleration of 2gf5 relative to the prism. (L.U.) 2. A rectangular block of mass M is provided with four light wheels and is free to move along two horizontal smooth rails. A particle of mass m1 slides on the horizontal smooth upper face of the block and is attached to a light, inextensible string which passes over a smooth pulley secured to one edge of this face and then hangs between the rails supporting a particle of mass m2 • The string lies in a vertical plane parallel to the rails. The string is drawn aside from the vertical through an angle "'· and the system is then released from rest. If the inclination of the string to the vertical remains constant at its initial value during the motion, show that M M . cosec ex + sm ex = - + - + 2, ml m 2 and that the acceleration of the block is g tan ex . 3. Three light inextensible strings AB, BC, CA are respectively of lengths a, a, ay2, and are knotted together at A , B, C. Masses m, M are carried at B, C respectively, and are moving on a smooth, horizontal table, so that ABC rotates freely about the knot A , which is pinned to a point of the table. If the string A C is cut, show that the ratio of the tensions in BC and AB immediately afterwards is Mf(m + M) . 4. Four equal light, inextensible strings are joined together to form the sides of a rhombus ABCD. A light bar forms the diagonal ED. Four particles of equal mass are placed at the vertices and the system hangs in equilibrium from a string attached to A . If the bar is G (1)
=
=
A C O U R S E I N A P PL I E D M A T H EMAT I C S
162
[CH.
suddenly removed without disturbing the configuration, show that the tension in this string is instantaneously reduced by a factor - cos L BAD) .
1/(2
5. Two particles whose masses are in the ratio 5 : 8 are attached to the points of trisection of a light, elastic string stretched between two points on a smooth, horizontal table. Find the periods of normal modes of transverse oscillation, and prove that in one of the modes the particles move in the same sense with amplitudes in the ratio : 5, and in the other mode the particles move in opposite senses with amplitudes in the ratio Three equal light springs AB, BC, CD, each of unstretched length and the same modulus, are joined end to end and carry masses at apart, on a B and C. The ends A and D are fixed points, distant smooth, horizontal table. Determine the normal modes of oscillation along the line AD and show that their frequencies are in the ratio : Show also that at the lower frequency the oscillations of the particles are identical, whereas at the higher frequency they are of the same amplitude but are in anti-phase. OAB is a light, elastic string of modulus :A hanging vertically from a support 0. A particle of mass is attached at A and a particle of mass at B. OA and AB The particles are set oscillating along the line of the string. Assuming that the string never goes slack during the motion, show that the equations of motion of the particles are 0, 0, where are the downward displacements of the particles from their equilibrium positions, and Show that two normal modes exist, one having double the frequency of the other. Calculate the ratio of the amplitudes of the particles' oscillations in each case. 8. A bead of mass slides on a fixed smooth circular vertical wire of radius and is connected by a light, inextensible string which passes over a smooth peg at the highest point of the wire to a particle of equal mass which hangs vertically. Calculate the minimum velocity with which the bead must be projected from the lowest point of the wire if it is to reach the highest point.
2 l.
6.
3a
4 (B.U.) a m
y'3 l.
7.
m
=a
(D2 + 3w2)x - w2y = 2w2x - (D2 + 2w2)y = w2 = :Af4ma.
x, y
a
2m = 2a.
m
A particle P of mass lies on a smooth table and is attached to a long, inextensible string which passes through a small smooth hole in the table. The other end of the string carries a particle Q of mass hanging freely. The particle P is projected from rest along the table at right angles to the string with speed when it is a distance from the hole. Prove that the particle Q will begin to rise if < 8, then and that, if the greatest distance of P from the hole is (L.U.) 10. A smooth, narrow tube, with open ends, in the form of one complete arch of a cycloid s sin .P is fixed with the tangent at the mid-
9.
m
(Sag)!,
2a,
= 4a
km a k k = 3.
6]
M O T I O N O F A PARTI CLE S Y ST EM-I
163
point A (rp = 0) of the arch vertical. A particle of mass is placed in the tube at A and is connected to a light, inextensible string. The string, whose length exceeds that of the arch, lies in the tube, and after passing out through the upper end of the tube is attached to another particle of mass which hangs freely. If the system is > show that released from rest and = sin sin and that if the reaction between and the tube vanishes when = t7t', then + (1t If < show that will = emerge from the lower end of the tube provided < 1tm. (L.U.) The period of small oscillations of a compound pendulum is It is hanging in equilibrium when it is suddenly set rotating with angular velocity Show that > if the body is to make complete revolutions in a vertical plane. Two simple pendulums are formed from equal light, rigid rods A BC, DEF of length suspended from the points A and D, which are on the same level. The bobs, of equal mass are placed at C and F. A light spring of stiffness and natural length AD joins B show that the normal periods of small and E. If AB = DE = oscillations about the position of equilibrium are and (M.U.) = = and where A light rod AB of length is freely hinged at B to a uniform rod BC of length and mass M. The end A is freely hinged to a fixed sup port, and C is attached to a small, light ring which moves on a smooth, horizontal rail passing through A . The system is released from rest with the rods horizontal, and B mid-way between A and C. If, after time t, the rod AB makes an angle 6 with the horizontal, prove that _ sin 6 ff. + sin2 6) (M.T.) A uniform rod of mass and length turns freely in a vertical plane about a fixed axis through one end 0. A light, elastic string of modulus and natural length :ll has one end attached to the mid-point of the rod and the other to a fixed point A at distance !1 vertically above 0. If 6 is the angle made by the rod with the upward vertical OA , show that the equation of motion of the rod is = sin !6) cos !6. Show also that the period of small oscillations about the position of equilibrium 6 = is the same as that of a simple pendulum of length (L.U.) One end of a uniform, rectangular plank of length and mass M is smoothly hinged to a smooth horizontal table. The plank rests against an upper edge of a smooth block of rectangular section, height and mass M', which lies on the table with the edge against which the plank rests parallel to the hinge. If the block is held at rest with the plank inclined at to the table, and then released, find the
m
11. 12.
13.
14.
m', m' m (m + m')s2 Sm'ga .p - 2mga 2,P - 4mga.p, m .p m m' jm (2y2 1) + 4) /14. m' m, 4m' T. w. w 47t/T 1
w12 gfl 2a
21mgfl 1/3, 3w 22 17gf1. 2a
() 2 - 2(1 3 6 m l
m,
27t/w1
a
mg
81/9.
15.
216 3g(1 - 2 7t/3
2a
ta
30°
27t/w 2
164
A C O U R S E I N A P P L I E D M A T H E MA T I C S
[cH.
angular velocity of the plank when it is inclined at an angle 6 to the table. Show also that the block has velocity
)t 2 ( M 6Mga + 48M'
16.
at the instant when the plank falls off. (L.U.) Two equal uniform rods A B, BC, each of length and mass smoothly hinged together at B, are held in a vertical plane with their ends A and C resting on a smooth, horizontal table, the angle ABC A light string attached to B passes over a small pulley being vertically above B and carries a mass at its other end. If the system is then released, prove that when the rods become horizontal (L.U.) the angular velocity of each of them is cos A uniform, solid sphere, centre 0 mass and radius has a uniform rigidly attached to a point A rod AB of length and mass of its surface so that 0, A , B are always collinear. Initially the system is at rest, with A B vertically above 0 and the sphere on a perfectly rough, horizontal table. Show that if AB is given a small displacement from the vertical and 6 denotes the angle between A B and the vertical, the value o f when B strikes the table is (L.U.) Two uniform rods A B, BC, freely hinged at B, are of equal mass and of lengths and respectively. AB is freely hinged at A to a fixed point on a smooth, horizontal table. The rods are held in a vertical plane, with C resting on the table and the angle ABC a right angle. If the rods are then released, prove that they will strike the table when the angular velocity of AB is V (L.U.) is fixed with A hollow, right-circular cylinder of internal radius its axis horizontal. A rough, solid, circular cylinder of radius can roll in the interior so that its axis remains horizontal during the motion, friction being sufficient to prevent sliding. When the plane through the two axes makes an angle 6 with the downward vertical, show that the angular velocity of the movable cylinder is If the movable cylinder is slightly disturbed from its position of equilibrium, show that it will oscillate with period (L.U.) A uniform circular hoop, of radius mass and centre 0, has a particle, also of mass m, attached to a point A of its rim. It rests on a rough, horizontal plane with its own plane vertical and with A as the lowest point. If it is set in motion so as to roll in its own plane with an initial angular velocity prove that, when OA makes an angle e with the downward vertical, cos cos 6) . Assuming that contact with the plane is maintained, prove that, if > A can rise to a position vertically above 0 and that it will downwards. then have an acceleration (L.U.) A uniform cotton-reel has radius of gyration about its axis. A length of light cotton is fixed to the surface of the reel and wound
2a
2cc.
17.
7mf20
2a
m/3 y(2g m
ccf3a). a,
6
18.
3a
m,
(2gf3a)i.
4a
4gf5a.
19.
7a
a
66.
20.
61ty(a{g). a, m
(2 -
aw2 2g,
21.
w, 6)a62 aw2 - g(l =
(aw2 - 2g)/3
k
6]
M O T I O N O F A PA R T I C L E S Y S T EM-I
165
,around it in a circle of radius whose plane is perpendicular to the axis and contains the mass centre. The free end of the cotton is held fixed whilst the reel falls vertically from rest and the thread unwinds from it. During the motion, the unwound thread remains vertical. Equating the rate of increase of KE to the rate at which the forces do work, show that the downward acceleration of the reel is Hence calculate the length of thread which unwinds in time t. A uniform, isosceles, triangular lamina of height and weight can turn freely about its base, which is fixed and horizontal. One end of a light, elastic string of natural length is attached to the vertex of the triangle and the other end to a point at a height vertically above the mid-point of the base. If the modulus of the string is find the inclinations of the triangle to the vertical in the four positions of equilibrium, and show that the positions in which the plane of the triangle is vertical are unstable. (L.U.) . A wheel, of mass and centre 0, consists of a uniform circular disc of radius in which have been cut four circular holes. The radius of each hole is and their centres, which are at a distance from 0, form the vertices of a square. Show that the moment of inertia of the wheel about an axis through 0 normal to the plane of the wheel is The wheel is free to rotate about this axis. A light, elastic string of modulus and natural length joins P, a point on the circumference of the wheel, to a fixed point A in the plane of the wheel. If A O = show that the length of the equivalent simple pendulum for small oscillations of the wheel about its stable position of equilibrium is (L. U.) To the ends of a light, inextensible string which passes over a small, smooth pulley are tied respectively a particle of mass and a bead of mass The bead moves on a straight, smooth, horizontal wire which is fixed in a vertical plane through the pulley at a depth below it. If the bead is initially at rest at a distance from its equilibrium position, find an equation to give its speed when at a distance x. If the bead is displaced slightly from its equilibrium position, prove that it will return to this position after a time (L.U.) A smooth, rigid wire in the form of a circle of radius is fixed in a vertical plane. A second smooth, rigid wire forms the lower vertical radius of the circle. A uniform rod of length such that < l < is constrained by small rings at its ends P and Q, which can slide the one P on the circle and the other Q on the straight wire. Show that there are positions of equilibrium in which the rod is inclined to the vertical and find the angles which the rod makes with the vertical in these positions. (L.U.) A smooth, circular wire of radius and centre 0 is fixed with its plane vertical. A uniform rod PQ of length and weight has small, light rings at its ends, which slide on the wire. A light, elastic string of natural length and modulus has one end tied to C, the mid point of PQ, and the other end to A , a fixed point at a distance
a,
ga2f(a2 + k2).
22.
3a
W
a
4a
5Wf48,
23.
a
M
;!a,
ta
55Ma2/96.
2Mg
a
3a, 55af288.
24.
M
m.
a
2a
irty(mafMg).
25.
a
l,
26.
a
a
6Wf7
6af5
ta
a,
W
2a
166
A C O U RS E I N A P P L I E D MATH EMAT I C S
[CH.
vertically above 0. Show that when the angle is - 6, the PE of the system is cos 6 cos 6)] + a constant. lrr Deduce that there are four possible positions of equilibrium, and that the two in which the rod is horizontal are both unstable. (L.U.)
AOC 1t
Wa[5
27.
A uniform rod of mass and length is smoothly hinged to a fixed point at A and has a particle of mass attached to which is connected by a light, elastic string of modulus and natural length to a point vertically below If C = show that the period of small oscillations about the position of equilibrium with vertically below is (L.U.)
AB,
!a
28.
3y(29 + 20 2m
C A 1t(5af3g)i.
a, m
A.
A
B,
mg 2a,
B
Two small, light rings, joined by a uniform rod whose mid-point is M, can slide on a smooth, circular wire fixed in a vertical plane with its centre at 0. The weight of the rod is W and the angle it subtends at 0 is The rings are connected by a light, elastic string which passes over a smooth peg situated at the highest point of the wire the modulus being W and the natural length where a is the length of the radius of the wire. Find the PE of the system when makes an acute angle 6 with the downward vertical. Show that there is a position of equilibrium when and determine whether the equilibrium is stable or unstable. (L.U.)
120°.
2a,
OM
e 60° =
29. A uniform bar AB of length l and weight W1 is smoothly hinged to a fixed point A. The bar is supported by a light, inextensible string attached to B and passing over a small, smooth pulley at a point C,
which is vertically above A at a height a( >l) . The string carries a freely hanging weight W 2 at its other end. Show that there are three positions of equilibrium, provided that
� < w1 < � w 2 a - l·
a+l
If W1 2 show that two of the positions of equilibrium are stable and one is unstable. (L.U.) =
30.
2W
A thin, smooth wire, in the form of a circle of radius is fixed in a vertical plane, the horizontal diameter being A bead of mass can slide on the wire, and attached to it is a light, inextensible string which passes through a smooth ring fixed at and carries at its other end a mass hanging vertically below Prove that there is an equilibrium position in which the bead is above the diameter and show that this position is unstable. If the bead is held at A and then set moving upwards with velocity find the least value of for which the bead will pass to (L.U.)
m,
B.
V,
B.
AB. B,
a,
m
AB V
31. A cylinder of radius a, whose axis 0102 is always horizontal, can roll on a perfectly rough plane which is inclined at an angle IX to the hori zontal. The centre of gravity G of the cylinder is at a distance b from 0102• Prove that, if b > sin IX, there are two possible positions of equilibrium and that in each case the plane G0102 makes an angle
a
M O T I O N O F A P A R T I C L E S Y S T E M- I
6]
167
sin-1 sin with the vertical. Prove also that one of the two positions is stable, and indicate which. (L.U.)
(a
32.
ajb)
A uniform, hemispherical shell of mass and radius c rests with its curved surface on a rough, horizontal table. A particle of mass is fixed on the rim and the system is allowed to roll to rest. If it be slightly disturbed in the vertical plane through the particle and the
M
3Mj8
centre, prove that the frequency of small oscillations is
4� ( 1:f) t
(L.U.)
33.
A uniform rod of length and weight can turn in a vertical plane about a smooth, horizontal axis through 0, distant from the end and carries a bead of the same weight which can slide smoothly on The bead is attached to a light, inextensible string of length which passes through a smooth ring at 0, over a smooth, fixed peg at a height vertically above 0 and is attached to the end of the rod. If is the inclination of to the downward vertical, show that the PE of the system is = cos EJ (cos !8 + constant. Hence show that there is a position of equilibrium of the system in which is acute and is equal to Show also that this position is stable. (L.U.)
AOB
A,
7a,
e
34.
W
P
OA .
e
A
6a
W
2a
OA 1) (11 2y10)af3.
V 4Wa OP
A uniform, thin rod of length is suspended from two fixed points at the same level by vertical strings each of length attached to its ends. It is turned through an angle about a vertical axis through its centre, and let go, the strings being kept taut. Construct the energy equation for the subsequent motion. If a is small, determine the period of the oscillation. (L.U.)
2a
a
35.
2a
b,
A right cylinder rests in equilibrium under gravity on a rough plane. Show that the equilibrium is stable provided the centre of mass is below the centre of curvature of a right section. The base of a uniform, solid cone is of radius and is secured to the plane face of a uniform, solid hemisphere of the same radius. The body so formed rests in equilibrium with the curved surface of the hemisphere in contact with a rough, horizontal plane. If p, p ' are the densities of the cone and hemisphere respectively and is the height of the cone, show that the equilibrium is stable provided
r
h
3r2 h2
p -' < - · p
36.
A hollow, right circular cylinder is fixed with its axis horizontal. A uniform, solid, right elliptical cylinder rests in equilibrium on the outside surface of the circular cylinder with its generators horizontal. One of the equi-conjugate diameters of a right section of the elliptical cylinder is vertical. Show that the equilibrium is unstable. If the elliptical cylinder is transferred to the inside of the fixed cylinder so that it rests in equilibrium in the same position, show that the equilibrium is then stable.
168
A C O U R S E I N A P P L I ED M A T H E MA T I C S
[cH. 6]
of length 2a and mass m is smoothly hinged at 37. A uniform rod A light spring of natural length and stiffness is attached at one end to and at the other end to D, a point vertically above = D = 3af2, find whether or not the positions of equilibrium If are stable when 2mgf3a and when 2mgf3a. (M.U.) A particle of mass m is connected by a light, inextensible string of 38. length 2a to a bead. of mass m, which is threaded on a fixed, smooth, vertical wire ; initially the string is taut and horizontal, is at rest and is moving vertically upwards with velocity u. If is the inclination of the string to the horizontal in the subsequent motion, find expressions for the reaction between the bead and the wire in terms of 8 and its derivatives with respect to the time. Deduce that + sin2 8) = u , and show that the tension of the string is mu2 (S.U.) 39. A homogeneous solid, in the form of a segment of a paraboloid of revolution, latus rectum cut off by a plane perpendicular to the axis at a distance from the vertex, is balanced vertex downward on the top of a rough sphere of radius Prove that the equilibrium is stable if (S.U.) A uniform rod of mass m and length can turn freely in a vertical plane about a fixed, horizontal axis at the end An elastic string of unstretched length �a and modulus ). is attached to and to a = If 3:A mg, prove that point vertically over where there is a stable position of equilibrium given by sin !oc: = mg) , where Ct: is the angle the rod makes with the upward vertical. If the rod is slightly disturbed from this position, show that the period of small oscillation is mg)am (S.U.) 7t 3 (5:A - mg) (3:A - mg) ·
ABC A. B AB A k> A B A
4a262(1
a
B
2
4a,
a.
b < a. AB,
C
A.
k<
b
40.
k
a,
A,
4[
A.
>
AC a. :A/(4:A -
(4). -
J
t
B
e
CHAPTER 7
KINEMATICS OF A RIGID BODY.
MOMENTS OF INERTIA
IN this chapter we shall be concerned with certain geometrical con siderations relating to a rigid body and its motion. 'i .1. Instantaneous Centre.
Space and Body Centrodes
Consider a rigid lamina moving in its own plane in which Oxy is a fixed, rectangular, cartesian reference frame (Fig. 7.1). Let O'uv be a
FIG. 7.1.-Two-dimensional Motion of a Lamina
similar reference frame fixed in the lamina. It will be convenient to specify a point P having coordinates (x, y) relative to the stationary frame by the complex number z = x + iy and a point having co ordinates (u, v) relative to the moving frame by w = u + iv. If P represents a particle of the lamina, z will be a function of the time t and, differentiating, (7.1) The vector representing the complex number z will accordingly have components (x, y) relative to Oxy, and it follows that z specifies com pletely the velocity of P. w will be constant for such a particle. Let 0' be represented in the stationary frame by the complex number -+ z0• Relative to O'uv, the vector 0' P is represented by the complex number w. Thus, if ifi is the angle made by O 'u with Ox, relative to
169
170
A C O U R S E I N A P PLI E D MATH EMAT I C S
Oxy,
this vector is represented by the number frame, ---+ ---+ ---+ OP = 00' + O'P, and thus z = z0 + weio/1.
wei.P.
[cH.
But, in any
(7.2)
Differentiating this equation with respect to t, we find that z = z0 +
iweio/1�,
(7.3)
giving the velocity of the particle P. Since wei.P represents the vector . 0'---+P---+ relative to the frame Oxy, iwei.Pf represents a vector perpendicular . to 0' P and of magnitude f . 0' P. Equation (7.3) therefore states that the velocity of P is compounded of the velocity of 0' and a com ponent due to the rotati0n of P about 0' with angular velocity � · The particle P will be stationary if z 0, i.e., if =
w -- izo . e-io/1. f
(7.4)
Thus, provided � =F 0, there will always be a particle of the lamina (given by equation (7.4)) which is at rest at any instant. The position of this particle is called the instantaneous centre (IC) of the motion at the instant under consideration. If 0' is taken to be coincident with the IC at some instant t, z0 will vanish and the velocity of any particle P of the lamina at time t can be calculated by regarding it as being in rotation about the instantaneous centre 0' with angular velocity � · The reader is warned that the acceleration of a particle cannot be found in this way (see Ex. 2 at the end of the chapter). If � = 0, the lamina is not rotating and there is no IC. Alternatively, since w ---+ cc as � ---+ 0 in equation (7.4), we can say that the IC is at infinity in this case. If the directions of motion of two particles of the lamina are known, the position of the IC is easily found. For this must be such that rotation about it causes the particles to move in the known directions. Hence, it must lie on the perpendiculars through the particles to their respective directions of motion. The IC lies at the intersection of these perpendiculars. Exercise AB, BC, CD are three bars pivoted at B and C. AB and CD rotate in the same plane about pivots at A and D respectively. Show that the IC for BC lies at the intersection of and CD (produced if necessary) .
AB
As the motion of the lamina proceeds, the IC will, in general, take up different positions on the lamina. Thus, in the case of a disc rolling along a straight rail without slipping, the point of contact of the disc with the rail at any instant is the IC, since this point is clearly at rest.
7]
K I NEMAT I C S O F A R I G I D B O D Y
171
But all points on the circumference of the disc come into contact with the rail. Hence, an observer moving with the disc and rotating with it will note that the IC traces out a circle on the disc, viz., the circum ference. The locus of the IC relative to the lamina is a curve which can be imagined as drawn upon the lamina and is called the body centrode. A stationary observer will also note that the IC traces out a curve. This locus, fixed in space, is termed the space centrode. In the case of the rolling disc the space centrode is the line of the rail. Writing equation (7.4) thus, (7.5) we have an equation of the form w = w (t/J). As t/J varies, the vector w traces out the body centrode. Equation (7.5) accordingly defines this locus. Substitution for w from equation (7.5) in equation (7.2) yields an equation for the position of the IC relative to the frame Oxy, viz., (7.6) This equation is of the form z = z (t/J) and determines the space centrode. At any instant during the motion the body and space centrodes
FrG. 7.2.-Space and Body Centrodes
must have a point I in common, namely the IC at this instant, for it lies on both loci (Fig. 7.2). As the motion proceeds, successive points along the body centrode will take up their position on the space centrode and, as they do so, play the role of the IC. Suppose that the points of the arc IK of the body centrode take up positions on the arc IH of the space centrode, K coinciding eventually with H. If the arcs IH and IK are always equal, then the phenomenon we have been
1 72
[cu.
A COURSE I N APPLIED MATHEMATICS
describing may be regarded as the rolling of the body centrode on the space centrode. We proceed to the proof of this equality. Differentiat ing equations (7.5), (7.6) with respect to if;, we obtain
dw = ( dz0 + . d2z0 ) e--i.P, dif; dif; z dif;2 dz _ dz0 . d2z0 dif; - dif; + z dif;2 '
(7.7) (7.8)
the first equation referring to the body centrode and the second to the space centrode. It follows that
= ,;�, 1 �: 1 (u' 2 + v' 2) ! = (x' 2 + y' 2)!,
or
(7.9) (7.10)
primes denoting differentiations with respect to if;. But
={'(x'2 + y'2)idif;, ' arc IK = { (u' 2 + v' 2)idif;, .
arc IH
"'·
"'·
(7.11) (7.12)
if;0, if;1 being the values of if; when the IC is at I and H respectively.
Equation (7.10) now implies the equality of the two arcs. We have accordingly proved that the motion of a lamina in its plane can, in general, be represented as the rolling of a curve fixed in the lamina (the body centrode) on a curve fixed in space (the space centrode). Example 1.
A wire ABC encloses an angle {3 between the straight A parts AB and BC. The wire moves in its own plane so that A B passes through a fixed point P, whilst BC touches a fixed circle, centre 0. Prove that the fixed centrode is a circle which passes through 0 and P, and find the moving centrode. (L.U.) The particle of the bar AB which is instantaneously at P
c
must be moving along the line of AB. Hence I, the IC, lies on the perpendicular PI to AB. Let BC touch the fixed circle G at Q. Then the particle of BC instantaneously at Q is moving along the line of BC. Hence I lies on the normal OQ to the fixed circle, The position of I has now been determined.
K I NEMATICS O F A RIGID BODY
7]
173
Consider the quadrilateral BPIQ. The angles at P and Q are right angles. Hence LPIQ = 7T - {3, i.e., this angle is constant throughout the motion. It follows that the segment PO, fixed in space, subtends a constant angle at I and therefore that the locus of this point in space is a circle passing through P and 0. This is the space centrode. Construct OG parallel to CB, meeting AB produced in G. Then LBGO {3. Hence the quadrilateral PIOG is cyclic and G lies on the space centrode. Now GI subtends a right angle at P, and thus GI is a diameter of the space centrode. But the space centrode is a fixed circle, and hence GI remains constant in length throughout the motion. Also, if is the radius of the fixed circle, centre 0, BG cosec {3, and it follows that G is fixed relative to the wire ABC. Relative to the wire, therefore, I moves on a circle, centre G, radius the constant length GI. This is the body centrode. We note that its radius is double that of the space centrode. The motion of the wire can now be reproduced by rolling the larger circle around the smaller, the latter remaining within the former.
=
r
=r
'i 2 Motion of a Rigid Body about a Fixed Pivot .
.
In the case of a rigid body in general motion, there is no particle which is at rest at any instant, i.e., there is no instantaneous centre. If, however, the rigid body moves about a fixed pivot at any instant, all the particles which lie upon a certain straight line through the pivot are stationary, i.e., the body is instantaneously in rotation about this line as axis and an instantaneous axis of rotation exists. This we proceed to demonstrate. Let 0 be the fixed pivot and let x, y be the respective position vectors, relative to a fixed frame of reference with origin 0, of two particles of the body X and Y. x and y will be functions of the time t and completely specify the orientation of the body at any instant. Let z be the position vector of any other point Z of the body. Since the body is rigid, x, y, z will be constant in magnitude, and thus x2, y2, z2 will each be constant. Differentiating these quantities with respect to t, we deduce that X · i: =
Y
·y=
Z
·
Z = 0,
(7. 13)
i.e., the points X, Y, Z move at right angles to their position vectors. Also, the angles between the vectors x, y, z will not vary during the motion, and hence x · y, y · z, z · X are all constant in value. Differentiating, we obtain the conditions Y
·Z + y·Z=
Z•
X+
Z X = X · Y + X · Y = 0. •
(7.14)
It follows from equations (7.13) and (7. 14) that y.z
x.
i: +
x.
y(z . i: + z . x) = 0.
(7.15)
z) • X = 0,
(7.16)
Writing this equation in the form (y Z X + •
Z•
XY+X Y •
174
A C O U R S E I N A P PLI ED MATH EMAT I C S
[CH.
we deduce that either (7.17) U = Y · z x + z · x :V + x · Y Z = O, or u is perpendicular to x. Similarly, by consideration of the equations z . X: y . y + y . z(x · y + X: . y) = o, x · y z · z + z · :ic(y · z + y · z) = 0, we conclude that either equation (7.17) is valid or u is perpendicular to y and z. We shall assume, for the moment, that the general particle Z does not lie in the plane OXY. Then x, y, z are not coplanar and thus u cannot be orthogonal to all three. Hence u = 0. Equation (7.17) is of the form
ax + by + c.Z = 0, where a, b, c are scalars.
If these scalars are all non-zero, we have
z=
Ai:
+ fLY,
(7. 18)
where A, fl. do not vanish. This equation implies that the direction of motion of any particle Z of the body is parallel to a plane containing the vectors x, y. This plane is, of course, normal to the instantaneous axis of rotation. We now show that a vector w exists with the property that the velocity of any particle Z of the rigid body is given by the equation (7. 19) We first suppose that x · y -=1c- 0, i.e., the direction of motion of Y is not perpendicular to x. If, in the first instance, this is not so, we alter the direction of x suitably by choosing another particle for X.* We now define w by the equation
w = (Y X x)/x · y . .
(7.20)
Substituting in the right-hand member of equation (7.19), we obtain X
:ic) . X z = z · y :ic - . z · x y X·Y X·Y y . z x +. z · i Y (by equations (7. 14)), =X·Y Z = X Y . (by equation (7.17)), X·Y = Z,
W XZ=
(Y
'
•
--
proving the property stated. If the rigid body is a lamina, this may not be possible, since x is then restricted to lie in a plane. However, we shall then suppose that the plate has been extended by the addition of some rigid structure.
*
7]
K I N EMAT I C S O F A R I G I D B O D Y
175
This result has been obtained on the assumption that Z does not lie in the plane OXY. However, since it can lie arbitrarily near to this plane and since the velocity vector is continuous over the region occupied by the rigid body, it follows that equation (7.19) is true without restriction. It is now clear from equation (7. 19) that if Z lies on the line through 0 parallel to w, then z = 0. Thus, any particle on this line is station ary. Let OA (Fig. 7.3) be this line and Z any particle of the body. Construct ZN perpendicular to OA . By equation (7.19),
i z l = w . OZ sin LZON = w . ZN.
(7.21)
Also, by equation (7. 19), the direction of Z's motion is perpendicular to the plane ZON. It follows that Z is moving, at the instant under consideration, with angular velocity A w about the axis OA . This is true for any particle of the body, which is accordingly in rotation about an instantaneous axis of rotation OA with angular velocity w. The vector w, having direction that of the instantaneous axis and magni tude that of the angular velocity about this axis, is termed the vector angular velocity of the body about 0. Although, for simplicity, we found it convenient in the foregoing to regard the reference frame, relative to which the motion of the rl·g1'd body was measured as bei'ng FIG. 7.3.-Angular Velocity Vector at rest, it could, in fact, be in rotation about 0 without in any way affecting the argument. Thus, suppose that 51 is a moving frame rotating about 0 and that 52 is a stationary frame momentarily co incident with 51 . The frames being coincident at the instant under consideration, we shall not find it necessary to state in the case of each vector relative to which frame it is to be taken. Let w 1 be the angular velocity of the rigid body relative to 5 1 and let w2 be the angular velocity of 5 1 relative to 52 at the same instant. Then the body's angular velocity relative to 52 is w1 + w2 . For, if P is any point of the rigid body and r is its position vector, its velocity relative to 51 is w 1 X r, i.e., this is the velocity of P relative to the point of 51 momentarily coincident with P. But the velocity of this point fixed in 51 relative to 52 is w2 X r. It follows that the velocity of P relative to 52 is '
(7.22)
176
A C O U R S E IN A P P L I E D M A T H E MA T I C S
[cH.
This being true for all points of the rigid body, we deduce that it has an angular velocity w1 + w2 relative to 52 • More generally, we can suppose that 52 is rotating with angular velocity w3 relative to a third frame 53 and that this in turn rotates with angular velocity w4 relative to 54, and so on. Then the body 's angular velocity relative to the final frame is w1 + w2 + w3 + A rough right circular cone of semi-angle ex is rolling on a rough horizontal plane, the contact generator revolving round the vertical through the vertex with angular velocity W1 • Find the angular velocity of the cone and discuss the motion of the cone relative to the moving vertical plane through the (Li.U.) contact generator.
Example 2.
If OA is the contact generator, each particle of the cone lying on this line is instantaneously at rest. Hence OA is· the instantaneous axis of rotation and w, the angular velocity of the cone, is directed along this line. Let C
be the centre of the base of the cone and let OC = h. Then C is rotating about OA with angular velocity w. Hence its speed is wh sin ex. But the vertical plane OA C has angular velocity w1 about the vertical through 0. It follows that the speed of C can also be expressed as w1h cos ex. Thus wh sin ex w1h cos ex, or w w1 cot ex. Relative to an observer moving with the vertical plane OAC, the particles on OC are at rest. Thus, relative to this plane, the cone rotates about OC. Let w0 be its angular velocity about OC. Then w = W0 + Wv and it is clear from the diagram that w0 = w1 cosec ex.
= =
w,
K I N EMAT I C S O F A R I G I D B O D Y
7]
17 7
7.3. General Three-Dimensional Motion of a Rigid Body
Let 0 represent some arbitrarily chosen particle of the body and let V be its velocity at the instant under consideration relative to some reference frame which we shall regard as stationary (Fig. 7.4) . Relative
FIG. .4-.-General Motion of a Rigid Body
7
to a parallel, non-rotating frame moving with 0, the body can only pivot about this point. Let w be the angular velocity of the body about 0. The velocity of a particle P relative to the frame moving �
with 0 is then w X s, where s is the vector OP. relative to the fixed frame is accordingly v=V
+w
X s.
The velocity of P (7.23)
If P is stationary, s must satisfy the equation
w X s = -V.
(7.24)
This is possible only if V is perpendicular to w (this is the case for two dimensional motion and an IC then exists) . In general, all particles of the body will be in motion. We will now calculate the effect of transferring the base point 0 to �
some other particle of the body, e.g., 0'. Let 00' = r. Let V' be the velocity of 0' and w' the angular velocity of the body about 0' The position vector of P relative to 0' is ( s - r) . Hence, by analogy with equation (7.23), the velocity of P is given by
X (s - r) . V' = V + w X r. .
v = V'
But
+ w'
(7.25) (7.26)
IN A P PLI E D MATH EMAT I C S [cH. v = V + w' X s + (w - w') X r. (7.27) (7.23) and (7.27) must yield the same value of v for all
A COURSE
178
Hence Equations values of s.
We conclude that
(7.28)
w' = w,
i.e., the angular velocity of a rigid body is independent of the point about which it is measured. A fortiori, w2 is independent of the base point 0 to which w is referred and is a scalar invariant of the motion. A second scalar invariant is the product V · w, for
V' · w' = (V + w X r) · w = V w . ·
(7.29)
This result implies that the component of the velocity of any point of the body in the direction of the angular velocity is a constant. Although, in general, we cannot find a base point 0' which is station ary, it is possible to find any number whose velocity V' is parallel to the angular velocity w. For such a point, w X V' = 0 and hence, by equation (7.26),
w X (V + w X r) = 0, (7.30) or w X V + w rw - w 2r = 0, xV i.e., r = w-(7.31) w2 - + tw, where t = w rjw 2• If we substitute for r from equation (7.31) into equation (7.30), the latter equation proves to be satisfied for all values of t. It follows that t is an arbitrary scalar and equation (7.31) defines a line l of points 0', through the point r = w X V/w 2, parallel to w. The body moves so that any such point has its velocity in the direction of l and, at the same time, the body rotates about l with angular velocity w. We have accordingly reduced the general motion of a rigid body to a " screw motion ", the axis of the screw being the line l. The pitch of the screw motion at any instant t is defined to be the ratio of the distance the body moves along l in a short time interval St to its angle of rotation about l. Thus, if p is the pitch and 0' lies on l, V' . w' _ V . w V'St (7.32) P - w'St - V' w' - � - w2 · Thus p is the ratio of the two scalar invariants. ·
·
_
_
_
The point (1, 0, 0) of a rigid body is free to move only in the direction (1, 2, 2) . The point (0, 1, 0) of the body is free to move only in the direction (0, 1, 2) . The point (0, 0, 1) of the body is free to move only in the plane x = 0. Find the pitch of the screw motion that is possible for the body. (Le.U.) Take the point 0 to be at (1, 0, 0) . Then V = (q, 2q, 2q). Let { w1, w2, w3) . The position vector of the point {0, 1, 0) relative to 0
Example 3.
w=
7]
K I N E M A T I CS O F A R I G I D B O D Y
179
is given by s = ( - 1, 1, 0) . Thus, by equation (7 .2 3) , the velocity of the point (0, 1, 0) is given by (q, 2q, 2q) + ( - w 3, - w3, w1 + w 2) , = ( q w 3, 2 q w 3, 2 q + w1 + w 2 ) . But (0, p, 2p) . Hence w 3 = 0, 2q - w 3 = p, 2q + w1 + w 2 = 2p. q From these equations, we derive the results w1 + w 2 = 0, w 3 =P = q . The position vector of the point (0, 0, 1) relative to 0 is s ( - 1 , 0, 1) and thus the velocity of this point is given by equation (7 .23) to be
V=
v=
-
-
-
=
V == ((qq, +2q,w2q), 2q+ (ww2, --w1w -, 2qw3+, ww2) ), . 1 3 2 2 But v lies i n the plane x = 0 and its z-component is therefore zero. -
2q +
w.
= 0.
Thus
We can now deduce that w1 = 2q, w 2 = - 2q, w3 = q . = w1 2 + w 2 2 + w3 2 = 9q 2, Hence V • W = qw1 + 2qw 2 + 2qw 3 = 0 and the pitch is zero. This implies that the body is instantaneously in rotation about a fixed point.
w2
7.4. Moment of Inertia of a Lamina
Let Ox, Oy be perpendicular axes in the plane of the lamina and let m be the mass of a typical particle at the point (x,y). Then AI= !my2 , B = !mx2 are the moments of inertia of the lamina about the axes Ox, Oy respectively. If Oz is an axis perpendicular to the plane of the lamina, the distance of the point (x, y) from it is y(x2 + y2) and hence the lamina's MI about Oz is
C = !m(x2 + y2) = !mx2 + !my2 = A + B. . (7.33) This is the theorem of perpendicular axes, viz., the MI of a lamina about
an axis perpendicular to its plane is equal to the sum of the moments of inertia of the lamina about a pair of perpendicular axes in its plane and intersecting the first axis. Now let OA (Fig. 7.5) be any axis through 0 in the plane of the lamina. If q = PN is the perpendicular from the particle P of mass m at the point (x, y) on to OA , the lamina's MI about OA is I=
!mq2 •
Let OA make an angle 6 and OP an angle 4> with Ox.
(7.34)
Then
q = OP sin(¢> - 6) = OP sin 1> cos 6 - OP cos 1> sin 6,
= y cos 6
and hence
x sin 6, I = !m(y cos 6 x sin 6) 2 , = A cos2 6 2H cos 6 sin 6 + B sin2 6, . -
-
-
(7.35)
1 80
A C O U R S E I N A P PL I E D MATH EMAT I C S
[cH.
where A and B have been defined already and
H = Lmxy. (7.36) H is termed the product of inertia of the lamina with respect to the axes Ox and Oy. y
A
FrG. 7.5.-MI
about any Axis in the Plane of a Lamina
Consider the conic
Ax2 - 2Hxy + By2 = K (a constant), (7.37) with its centre at 0. Let OA intersect the conic in the point Q, where OQ = r. At Q, X = r cos e, y = r sin e and hence Ar2 cos2 e 2Hr2 cos e sin e + Br2 sin2 e = K, or (7.38) Equation (7.38) implies that the MI of the lamina about OA is in versely proportional to the square of the radius of the conic in the direction OA. Alternatively, since I = Mk2 , where k is the radius of gyration, k is inversely proportional to r. The conic must be an ellipse, since, by equation (7.38), r is real for all e. The conic is called the Momental Ellipse. Suppose we rotate the axes Oxy about 0 until they are principal -
axes for the ellipse. Then the equation of the ellipse will be
Ax2 + By2 = K,
(7.39)
where A and B are now the moments of inertia about the new axes. Thus, measuring 6 from the new position of Ox, equation (7.35) is re placed by I = A cos2 e + B sin2 e (7.40)
K I N E MA T I CS O F A R I G I D B O D Y
7]
181
and, clearly, H = 0. Perpendicular axes through 0 for which the product of inertia vanishes are termed principal axes of inertia and the moments of inertia about them are the principal moments of inertia at 0. Returning Ox, Oy to their original positions, if OB is perpendicular to OA , as indicated in Fig. 7.5, the product of inertia relative to the axes OA B is 1 = L.mpq, where p = ON. But
p = OP cos(¢> - 6) = OP cos ¢> cos e + OP sin ¢> sin e,
Hence
= X COS 6 + J sin 6.
1=
"'i.m(x cos e + y sin 6) (y cos e - X sin 6),
= (A - B) sin e cos e + H(cos2 e - sin2 6) , = t (A - B) sin 26 + H cos 26.
(7.41)
This will vanish if e is selected so that 2H (7.42) ·. B_A Hence, for such a value of e, OA, OB are principal axes. Although there are four values of e in the range (0, 21t) satisfying equation (7.42), these differ by multiples of t7t and thus do not represent essentially distinct sets of principal axes. If the axes Oxy are principal axes, H = 0 and consequently equation (7.41) reduces to 1 t(A - B) sin 26, (7.43} tan 26 =
=
e being measured from the new x-axis. Equations (7.40) and (7.43) permit the calculation of moments and products of inertia relative to any pair of perpendicular axes through 0 , when the principal axes and moments of inertia are known at this point. If the lamina is symmetrical about Oy, then Ox, Oy are principal axes, for to each term mxy of the sum H contributed by a mass m at the point (x, y) there will correspond a term -mxy contributed by a similar mass m at the point ( -x, y). Thus, all terms of H will cancel in pairs. If a lamina has the same moments of inertia about each of three con current lines in its plane, prove that the moment of inertia about any line through their intersection and in the plane of the lamina is constant. Hence find the moment of inertia of a uniform square lamina, of side 2a and mass m, about a line passing through a vertex and the mid-point of a non-adjacent side.
Example 4.
(L.U.) Let 0 be the point of concurrence of the three lines and let Ox, Oy be principal axes at 0. Let A, B be the principal moments of inertia at 0. If I is the moment of inertia about any one of the lines and these make angles ex, {3, y with Ox, then I = A cos• ex + B sin2 ex, = A cos2 f3 + B sin2 {3, = A cos2 y + B sin2 y.
182
A COURSE I N APPLIED MATHEMATICS
[CH.
Subtracting the first equation from the second, we deduce that A (cos• "' - cos• {3) = B(sin2 f3 - sin• e<), = B(cos2 "' - cos• {3) . Thus A = B or cos2 "' = cos• {3. A = B or cos "' = cos {3. I.e., A = B or "' = n1T f3 (n an integer) . Therefore If "' = n1T + {3, the lines having slopes "' and f3 are identical. Hence, if A i= B, "' = n1T - {3. But similarly, if A i= B, "' = m1T - y and therefore f3 = (n - m)1T + y, i.e., the lines of slopes f3 and y are identical. We con clude that, if the three lines are distinct, then A = B. Then, the moment of inertia about any line through 0 making an angle e with is given by I = A cos• e + A sin2 0 = A , i.e., is a constant independent o f e. If 0 is the centre of the uniform square lamina, axes through 0 parallel to the sides are clearly principal axes, for they are axes of symmetry. The principal moments of inertia are both tma2 and it follows that the MI about any axis through 0 is also tma2 . But the distance between the axis l through a vertex and the mid-point of a non-adj acent side and a parallel axis through 0 is afy'5. It follows from the parallel axes theorem (see next section) that the MI about l is tma• + tma• = 186ma2 •
± ±
Ox
7 .5. Moment of Inertia of a Solid Body
Let 0 be any particle of the body and let Oxyz be a rectangular reference frame. The distance of a particle of mass m situated at the point (x, y, z) from the x-axis is y(y2 + z2). Thus, the body's MI about Ox is A = �m(y2 + z2) . (7.44) Similarly, its moments of inertia about Oy and Oz are B = �m(z2 +
x2), C = �m(x2 + y2 ),
(7.45)
respectively. Let l be any axis through 0 having direction cosines (:r., fl., '1) (Fig. 7.6) . z
FIG. 7.6.-MI of a Body about any Axis
7]
K I NEMAT I C S O F A R I G I D B O D Y
183
If u is the unit vector in the direction of l, u has components (:A, tJ., v) . Let r be the position vector of the particle of mass m at the point P(x, y, z). The vector r X u has magnitude r sin