31 Days Before Your CompTIA A+ Exams Second Edition Ben Conry
Cisco Press
•
800 East 96th Street
•
Indianapolis, Indiana 46240 USA
ii
31 Days Before Your CompTIA A+ Exams
31 Days Before Your CompTIA A+ Exams Second Edition Ben Conry Copyright © 2012 Cisco Systems, Inc. Published by: Cisco Press 800 East 96th Street Indianapolis, IN 46240 USA All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission from the publisher, except for the inclusion of brief quotations in a review. Printed in the United States of America First Printing September 2011 Library of Congress Cataloging-in-Publication data is on file. ISBN-13: 978-1-58713-260-5 ISBN-10: 1-58713-260-5
Warning and Disclaimer This book is designed to provide information about preparing for CompTIA A+ certification exams 220-701 and 220-702. Every effort has been made to make this book as complete and as accurate as possible, but no warranty or fitness is implied. The information is provided on an “as is” basis. The authors, Cisco Press, and Cisco Systems, Inc., shall have neither liability nor responsibility to any person or entity with respect to any loss or damages arising from the information contained in this book or from the use of the discs or programs that may accompany it. The opinions expressed in this book belong to the author and are not necessarily those of Cisco Systems, Inc.
Trademark Acknowledgments All terms mentioned in this book that are known to be trademarks or service marks have been appropriately capitalized. Cisco Press or Cisco Systems, Inc., cannot attest to the accuracy of this information. Use of a term in this book should not be regarded as affecting the validity of any trademark or service mark.
Corporate and Government Sales The publisher offers excellent discounts on this book when ordered in quantity for bulk purchases or special sales, which may include electronic versions and/or custom covers and content particular to your business, training goals, marketing focus, and branding interests. For more information, please contact: U.S. Corporate and Government Sales 1-800-382-3419
[email protected] For sales outside the United States please contact: International Sales
[email protected]
iii
Feedback Information At Cisco Press, our goal is to create in-depth technical books of the highest quality and value. Each book is crafted with care and precision, undergoing rigorous development that involves the unique expertise of members from the professional technical community. Readers’ feedback is a natural continuation of this process. If you have any comments regarding how we could improve the quality of this book, or otherwise alter it to better suit your needs, you can contact us through email at
[email protected]. Please make sure to include the book title and ISBN in your message. We greatly appreciate your assistance.
iv
31 Days Before Your CompTIA A+ Exams
Publisher
Paul Boger
Associate Publisher
Dave Dusthimer
Manager, Global Certification
Erik Ullanderson
Business Operation Manager, Cisco Press
Anand Sundaram
Executive Editor
Mary Beth Ray
Managing Editor
Sandra Schroeder
Development Editor
Box Twelve Communications, Inc.
Senior Project Editor
Tonya Simpson
Copy Editor
Keith Cline
Technical Editor(s)
Sharon Hain, Bill Shurbert
Editorial Assistant
Vanessa Evans
Book Designer
Louisa Adair
Cover Designer
Sandra Schroeder
Composition
Bronkella Publishing
Indexer
Erika Millen
Proofreader
Dan Knott
Americas Headquarters Cisco Systems, Inc. San Jose, CA
Asia Pacific Headquarters Cisco Systems (USA) Pte. Ltd. Singapore
Europe Headquarters Cisco Systems International BV Amsterdam, The Netherlands
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices. CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)
v
About the Author(s) Ben Conry teaches a cybersecurity magnet program at Sollers Point Magnet High School. He graduated from Oberlin College in 1995 with a Bachelor’s degree in music education with an emphasis in composition. He earned a Master’s degree in instructional technology from Johns Hopkins University in 2002. Currently, he holds CCNA, CCAI, and CompTIA A+ certifications. He has received awards and citations for his commitment to educational excellence and for preparing students for college and the workforce. Ben lives with his wife and two children in Lutherville, Maryland.
About the Contributing Author James Pyles (CompTIA A+, CompTIA Network+) works as a consultant, author, editor, and technical writer. He has been involved in numerous Ethernet rollout projects, software and hardware installations and upgrades, and Windows and UNIX operating system upgrades. James has provided support services for a city government IT department and a wireless network vendor, and he has supported a usability lab for Hewlett-Packard. He has served as a technical writer for EmergeCore Networks, Aquent Studios, iAnywhere/Sybase, and as a developmental editor for Global Support Content Operations at Hewlett-Packard. James has authored and served as technical editor on several books about CompTIA A+, Microsoft SharePoint, and GIMP. He has also been a contributor to Linux Pro Magazine and Ubuntu User Magazine. His most recent book is CompTIA A+ Certification Practice Exams (McGraw-Hill Osborne, January 2011). He currently works as a technical writer at Keynetics, Inc., in Boise, Idaho.
About the Technical Reviewers Sharon Hain (A+, CCNA) has been a high school and community college instructor for more than 40 years, implementing computer repair and networking programs in the high school and taking a lead role in developing those programs at the community college. She works closely with the Cisco learning programs and acted in an advisory capacity there and for other start-up high school and community college programs. Sharon has worked for many years as a mentor to students and instructors in this field. Bill Shurbert is a professor of information technology at NHTI—Concord’s Community College in Concord, New Hampshire. Bill holds a Bachelor’s degree in technical management from Southern New Hampshire University. He enjoys teaching Cisco CCNA, A+, and wireless networking classes. In his off time, Bill and Joanne, his wife of 28+ years, sail the waters of Lake Winnipesaukee.
vi
31 Days Before Your CompTIA A+ Exams
Dedications This book is dedicated to my mother. —Ben Conry
vii
Acknowledgments Mary Beth Ray is among the kindest, most-forward-thinking people I know, period. It is an honor and privilege to work with her. Dayna Isley has taught me more about my own language than I care to admit on record. Thank you. We will miss you. Best wishes in your new endeavor. —Ben Conry
viii
31 Days Before Your CompTIA A+ Exams
Contents at a Glance Day 31: Storage
1
Day 30: Motherboards, Adapter Cards, Memory Slots, and Power Supplies Day 29: Processors and Cooling Day 28: Memory
13
21
Day 27: Displays, Peripherals, and Adapters
27
Day 26: Operating Systems Comparisons and User Interfaces Day 25: Operating System Installation and Booting Day 24: Laptops and Printers
35
45
57
Day 23: Basic Troubleshooting and Preventive Maintenance Day 22: Troubleshooting Laptops and Printers Day 21: Networking Fundamentals
69
73
79
Day 20: More Networking Fundamentals Day 19: Security
5
89
95
Day 18: Scenario-Based Safety and Environmental Procedures Day 17: Scenario-Based Communication and Professionalism Day 16: Essentials 220-701 Exam Review Day Day 15: Essentials 220-701 Exam Day
101 105
111
113
Day 14: Installing Storage Devices, Motherboards, and Power Supplies
115
Day 13: Installing Processors, Memory, Adapter Cards, and Cooling Systems Day 12: Troubleshooting Storage Devices, Motherboards, and Power Supplies Day 11: Troubleshooting Processors
131
Day 10: Troubleshooting Memory, Monitors, Audio, Keyboards, and Cooling Systems 135 Day 9: Scenario-Based Troubleshooting of Laptops, Printers, and Specialty Tools 141 Day 8: Operating System Commands and Directory Structures
151
123 127
ix
Day 7: System Utilities
159
Day 6: Troubleshooting Common Operating System Issues Day 5: Troubleshooting Networks
175
Day 4: Install and Configure a SOHO Network Day 3: Scenario-Based Security
181
187
Day 2: Practical Application 220-702 Exam Review Day Day 1: Practical Application 220-702 Exam Day Index
197
165
195
193
x
31 Days Before Your CompTIA A+ Exams
Contents Day 31: Storage
1
A+ 220-701 Exam Objective Key Points
1
1
Storage Devices
1
Hard Drives 1 Floppy Drives 1 Solid-State HDD and NVRAM 2 Tape Drives 2 CD, DVD, and BD Drives 2 Network Drives 3 Interfaces and Cables Homework Funwork
3
4 4
Study Resources
4
Day 30: Motherboards, Adapter Cards, Memory Slots, and Power Supplies A+ 220-701 Exam Objectives Key Points
5
5
Motherboards
5
Adapter Card Interfaces 7 Memory Slots
9
Power Supplies
9
RAID Adapters
11
Homework Funwork
11 12
Study Resources
12
Day 29: Processors and Cooling
13
A+ 220-701 Exam Objectives
13
Key Points
13
Central Processing Unit
RISC and CISC 15
13
5
Contents
Processors
15
System Resources Cooling Systems Homework
16 17
18
Funwork
18
Study Resources Day 28: Memory
19
21
A+ 220-701 Exam Objective Key Points Memory
21
21 21
RAM 21 Speed 22 Virtual RAM 23 ROM
23
EEPROM 23 NVRAM 23 Memory Slots Homework Funwork
23
24 24
Study Resources
25
Day 27: Displays, Peripherals, and Adapters A+ 220-701 Exam Objectives Key Points Resolutions
27
27 27
Peripheral and Input Devices
Mouse and Touchpad 28 Keyboard 28 Adapter Cards
28
PCI and PCIe Cards 29 AGP Cards 29 Sound Cards 29 TV Tuner Cards 29
28
27
xi
xii
31 Days Before Your CompTIA A+ Exams
Capture Cards 29 NIC and Modem Cards 30 Ports
30
USB Ports 30 PS/2 Ports 31 Serial Ports 31 Parallel Ports 31 Display Adapter Ports Cables
32
32
Audio Cables 33 FireWire Cables 33 Network Cables 33 SCSI Cables 33 Homework Funwork
34 34
Study Resources
34
Day 26: Operating Systems Comparisons and User Interfaces A+ 220-701 Exam Objective Key Points
35
35
Operating Systems and the Layered PC Model Desktop Operating Systems
36
Apple OS X 36 Microsoft Windows 36 Linux 37 OS System Requirements
38
Network Operating Systems The “Multi” Terms GUI Versus CLI
39
40 40
Command-Line Syntax 40 Command Prompt Commands 41 Users and Permissions Homework
43
43
35
35
Contents
Funwork
43
Study Resources
44
Day 25: Operating System Installation and Booting A+ 220-701 Exam Objectives
45
The Windows User Interface
45
GUI Utilities 45 Windows 7 Libraries 45 My Computer 46 Control Panel 46 Command-Line Utilities
46
Ping 47 Telnet
47
Ipconfig 47 Run-Line Utilities
48
MSConfig 48 MSInfo32 49 Dxdiag 49 Regedit 49 Operating System Installation Hardware Compatibility List
50 50
Preparing the HDD for an OS Installation
Partitioning 50 Formatting 51 Windows Boot Process
51
Clean Operating System Install Boot Modes
52
Logical Memory
53
Windows Boot Options
53
Safe Mode 53 Boot to a Restore Point 53
52
50
45
xiii
xiv
31 Days Before Your CompTIA A+ Exams
Recovery Options 54 Automated System Recovery 54 Emergency Repair Disk 54 Recovery Console 55 Homework Funwork
55 55
Study Resources
56
Day 24: Laptops and Printers
57
A+ 220-701 Exam Objectives Key Points
57
57
Expansion Devices
57
PCMCIA Cards and PCI Express Cards 57 Docking Stations
58
Laptops and Projectors
59
Communication Connections
59
Bluetooth Devices 59 Infrared Communications 60 Cellular WANs
60
Ethernet NICs 61 Modems 61 Power Settings and Electrical Input Devices
62
Autoswitching Power Supplies and Fixed-Input Power Supplies 62 Batteries
62
ACPI Levels 63 Input Devices
Digitizers
63
64
Function Keys 64 Pointing Devices 64 Printer Types
65
Laser Printers 65 Inkjet Printers 65
Contents
Thermal Printers 66 Impact Printers 66 Local Versus Network Printers Printer Drivers (Compatibility) Consumables Homework Funwork
66 67
67
67 67
Study Resources
67
Day 23: Basic Troubleshooting and Preventive Maintenance A+ 220-701 Exam Objectives Key Points
69
Troubleshooting
69
More on Troubleshooting Memory Dumps Homework Funwork
69
70
71
71 71
Study Resources
72
Day 22: Troubleshooting Laptops and Printers A+ 220-701 Exam Objectives Key Points
73
73
73
Cleaning Laptops Repairing Laptops
73 73
Common Laptop Problems and Solutions 73 Video Ports 74 Keyboards
75
Wireless Cards 75 A Lifeless Laptop? 75 Peripheral Problems? 75 No Video? Woeful WiFi?
76 76
69
xv
xvi
31 Days Before Your CompTIA A+ Exams
Common Printer Problems and Solutions
76
Managing Print Jobs 76 Homework Funwork
77 77
Study Resources
78
Day 21: Networking Fundamentals A+ 220-701 Exam Objective Key Points
79
79
79
LANs, WANs, and WLANs
79
LANs 79 WANs 79 WLANs 79 OSI Model
80
Simplex, Multicasting, Half-Duplex, and Full-Duplex Communications 81 Network Addressing
81
MAC Addresses 81 IP Addresses 82 Subnets 82 A Class Act 82 Really Big Numbers
83
Network Topologies
83
Physical Topologies
83
Logical Topologies 83 Client/Server Networks and Peer-to-Peer Networks 84 Network Architectures
84
The Physical Layer of Ethernet 85 The Physical Layer of WiFi 85 Bluetooth Homework Funwork
85 86 86
Study Resources
87
Contents
Day 20: More Networking Fundamentals A+ 220-701 Exam Objectives Key Points
89
89
Network Protocols
89
Standards Organizations Ports of Call Wire Drill
90
91
91
Seeing the Light File Sharing
92
92
Homework Funwork
89
92 92
Study Resources Day 19: Security
93
95
A+ 220-701 Exam Objectives Key Points
95
95
Security Threats WiFi Security
95
97
Antivirus, Spyware Removal, and Definition Updates Firewalls
98
User Training and Password Policies Troubleshooting Security Homework Funwork
98
99
99
99 99
Study Resources
100
Day 18: Scenario-Based Safety and Environmental Procedures A+ 220-701 Exam Objective Key Points Hazards
101 101
Fire Safety
101
Material Safety Data Sheets Tools
101
102
102
Electrostatic Discharge
103
Disposing of Computer Components
103
101
xvii
xviii
31 Days Before Your CompTIA A+ Exams
Homework Funwork
104 104
Study Resources
104
Day 17: Scenario-Based Communication and Professionalism A+ 220-701 Exam Objective Key Points
105
105
Customer Support
105
Service Level Agreements Professional Advice Difficult Scenarios
106
106 106
A Geekspeak Translation Guide Homework Funwork
107
108 108
Study Resources
108
Day 16: Essentials 220-701 Exam Review Day The Cheat Sheet Study Technique Homework Funwork
105
111
111
111 112
Day 15: Essentials 220-701 Exam Day The Perfect Score
113
Before the Exam
113
During the Exam
113
RTDQ
113
113
The Most Important Test-Taking Tip 114 After the Exam
114
Day 14: Installing Storage Devices, Motherboards, and Power Supplies A+ 220-702 Exam Objective Key Points
115
115
Storage Devices
115
SATA Installation 115 PATA Installation 116 Floppy Drive Installation 116
115
Contents
Motherboards
xix
116
Legacy Expansion Slots 117 Old-School D Plugs 117 Flashing the BIOS: A Closer Look 118 Power Supplies
118
Controller Cards
119
Installing a RAID Controller Card 119 Installing an eSATA Controller Card 119 Homework Funwork
120 120
Study Resources
121
Day 13: Installing Processors, Memory, Adapter Cards, and Cooling Systems A+ 220-702 Exam Objective Key Points
123
124
Adapter Cards
124
Cooling Systems Homework Funwork
123
123
Processors Memory
125
125 125
Study Resources
126
Day 12: Troubleshooting Storage Devices, Motherboards, and Power Supplies A+ 220-702 Exam Objective Key Points
127
127
Maintenance Toolkit Safety First
127
128
Cleaning Solutions
128
Troubleshooting Storage Issues Troubleshooting Motherboards Testing Power Supplies Homework Funwork
123
130 130
Study Resources
130
129
128 129
127
xx
31 Days Before Your CompTIA A+ Exams
Day 11: Troubleshooting Processors A+ 220-702 Objective Key Points
131
131
131
CPU Architecture
131
32-Bit Processing Versus 64-Bit Processing CPUs and Legos
131
132
Sockets 132 Cache 132 RAM 132 Multicore CPUs 132 The Future of 64-Bit Processing 132 Front-Side Bus 133 Homework Funwork
133 133
Study Resources
133
Day 10: Troubleshooting Memory, Monitors, Audio, Keyboards, and Cooling Systems 135 A+ 220-702 Exam Objective Key Points
135
135
Troubleshooting Memory
135
Troubleshooting Monitors
135
Troubleshooting Audio
136
Troubleshooting Keyboards
137
Troubleshooting Cooling Systems Homework Funwork
138
138 138
Study Resources
139
Day 9: Scenario-Based Troubleshooting of Laptops, Printers, and Specialty Tools 141 A+ 220-702 Exam Objectives Key Points LCDs
141
141
Laptop Hard Drives
142
141
Contents
Networking for Laptops Video RAM
143
143
Hot-Swappable Devices and Not-Swappable Devices Measuring Memory and Speed: When Size Matters Repairing and Replacing Components Troubleshooting Printers
143
144
145
145
Printer RAM and Firmware 146 Paper Jams 146 Blank Paper 146 Error Codes 146 Lines and Smearing 147 Printing Garbage 147 Ghosted Image 147 Serious Solutions: Laser Printers 147 Serious Solutions: Inkjet Printers 147 Serious Solutions: Paper Problems 148 Toner Cartridges 148 Cleaning Printers
149
Cleaning Inkjet Printers 149 Cleaning Laser Printers 149 Cleaning Dot-Matrix Printers 149 Homework Funwork
150 150
Study Resources
150
Day 8: Operating System Commands and Directory Structures A+ 220-702 Objectives Key Points
151
Command-Line Switches
dir 151 xcopy
151
152
attrib 153 format 153
151
151
xxi
xxii
31 Days Before Your CompTIA A+ Exams
ipconfig
153
ping 154 Registry
154
System Folders and Users
155
Shared Folders and Naming Conventions Mapping a Network Drive Accessibility Options Homework Funwork
156
156
156
157 157
Study Resources
157
Day 7: System Utilities
159
A+ 220-702 Exam Objective Key Points
159
159
Administrative Tools
159
Disk Management Tools
159
Defrag 160 NTBACKUP 160 Check Disk 160 Permissions
160
Remote Desktop Connection and Remote Assistance Language Packs and Regional Settings Disk Management and Utilities System Monitor Task Manager
162 162
Device Manager
163
System Information
163
System Restore
163
Task Scheduler
163
Homework Funwork
164 164
Study Resources
164
162
161
161
Contents
Day 6: Troubleshooting Common Operating System Issues A+ 220-702 Exam Objective Key Points
165
165
Operational Problems
165
Windows Printing Problems 165 Auto-Restart Errors 166 Bluescreen Errors 166 System Lockups 166 Device Driver Problems 167 Last Known Good Configuration 167 Application Issues 167 Service Fails to Start 167 Error Messages and Conditions Boot Errors
167
168
No Operating System Found or Missing NTLDR 168 Not Enough HDD Space 168 Invalid Boot Disk 168 Startup Errors
169
Service Failed to Start 169 Program Not Found in the Registry 169 Event Viewer 169 System Performance and Optimization
169
Aero Settings 169 Index Settings 170 UAC
170
Sidebar Settings 170 Startup Maintenance 170 Background Processes 171 Msconfig
171
Change File Extension Associations File Attributes Virtual Memory
171 172
171
165
xxiii
xxiv
31 Days Before Your CompTIA A+ Exams
Default Disabled Windows Administrator Account ERD and ASR Homework Funwork
172
172
173 173
Study Resources
173
Day 5: Troubleshooting Networks A+ 220-702 Objective Key Points
175
175
175
Troubleshooting the Physical Layer
175
Exploring ipconfig /all Outputs 175 Troubleshooting TCP/IP 176 Other Network Troubleshooting Techniques 176 Follow the Packet
177
Mail Protocol Settings
178
SMTP 178 IMAP 178 POP3 179 FTP Settings Homework Funwork
179 179
179
Study Resources
180
Day 4: Install and Configure a SOHO Network A+ 220-702 Exam Objective Key Points
181
Connection Types The Basic SOHO The Better SOHO
181 182 183
The Hardened SOHO
183
Network Defense 183 Host Defense 184 User Education 184 Homework
185
181
181
Contents
Funwork
185
Study Resources
185
Day 3: Scenario-Based Security A+ 220-702 Exam Objectives Key Points
187 187
187
Antivirus Software Malware Types
Adware
187
187
188
Trojan 188 Virus 188 Worms Firewalls
188
189
SHA and MD5 Encryption
189
189
Authentication BIOS
190
190
Virtual Private Networking Homework Funwork
190
190 191
Study Resources
192
Day 2: Practical Application 220-702 Exam Review Day By Any Other Name Brain Dumps
193
193
Write Your Own Practice Questions
194
Good Answers Versus Correct Answers Homework Funwork
194
194 194
Day 1: Practical Application 20-702 Exam Day Before the Exam
195
During the Exam
195
After the Exam Index
197
195
195
193
xxv
xxvi
31 Days Before Your CompTIA A+ Exams
Command Syntax Conventions The conventions used to present command syntax in this book are the same conventions used in the IOS Command Reference. The Command Reference describes these conventions as follows: ■
Boldface indicates commands and keywords that are entered literally as shown. In actual configuration examples and output (not general command syntax), boldface indicates commands that are manually input by the user (such as a show command).
■
Italic indicates arguments for which you supply actual values.
■
Vertical bars (|) separate alternative, mutually exclusive elements.
■
Square brackets ([ ]) indicate an optional element.
■
Braces ({ }) indicate a required choice.
■
Braces within brackets ([{ }]) indicate a required choice within an optional element.
Introduction 31 Days Before Your CompTIA A+ Exams is a bridge between learning the art of computer repair and actually taking the CompTIA A+ exams. You stand ready to make your knowledge official, provable, to become a professional computer technician. Every day for the next 31 days, you will cover a small area of the exams. The divide-and-conquer strategy allows you to focus on the topics at hand and not be overwhelmed with the massive amount of tested material. Professional certifications have been an important part of the computing industry for many years and will continue to become more important. Many reasons exist for these certifications, but the most popularly cited reason is that of credibility. All other considerations held equal, the certified employee/consultant/job candidate is considered more valuable than one who is not.
Goals and Methods The goal of this book is to provide you with a step-by-step method of study and preparation for the CompTIA A+ Essentials exam (220-701) and the CompTIA A+ Practical Application exam (220702). Students must pass both exams to earn the CompTIA A+ certification. In this book, you will find the following: ■
Short summaries of topics, definitions, and diagrams of important concepts
■
Tables, figures, and examples of devices, directions, and commands you might find on the CompTIA A+ exams
■
A Study Resources table to provide a quick reference to in-depth treatment of the day’s topics
■
Occasional attempts at nerd humor
This book can also serve as a guide for instructors to review the Cisco Networking Academy IT Essentials: PC Hardware and Software Version 4.1 course and prepare an entire class for the A+
xxvii
exams. You can use this book to fit certification exam preparation into a busy schedule, because it requires just a little bit of study each day.
Who Should Read This Book? This book is for anyone preparing for the CompTIA A+ exams working with one of the following resources: ■
IT Essentials: PC Hardware and Software Course and Companion Guide, Fourth Edition (Cisco Press). ISBN: 9781587132636
■
CompTIA A+ Cert Guide (220-701 and 220-702), Second Edition (Que Publishing). ISBN: 9780789747907 (Mark Edward Soper, Scott William Mueller, David L. Prowse)
■
The Complete A+ Guide to PC Repair, Fifth Edition Update (Addison Wesley). ISBN: 9780132727594 (Cheryl Ann Schmidt)
■
The Comprehensive A+ Guide to Managing and Maintaining Your PC, Seventh Edition (Course Technology). ISBN: 9781435497788 (Jean Andrews)
■
CompTIA A+ Certification All-in-One Exam Guide (Exams 220-701 and 220-702), Seventh Edition (McGraw-Hill). ISBN: 9780071701334 (Mike Meyers)
■
Mike Meyers’ All-in-One Guide to Supporting Windows 7 for CompTIA A+ Certification: Exams 701 & 702 (McGraw-Hill). ISBN: 9780071763929 (Mike Meyers)
Strategies for Exam Preparation Find a distraction-free area: no kids, no siblings, no pets, no headphones, no radio or TV. (A cup of coffee and a fireplace are recommended, however.) Dedicate about an hour every day to study in this refuge. It can be difficult at first to find the time and place, but it is time and effort well spent. To that retreat, bring this book, your attention, and preferably access to any of the resources noted earlier. A set of A+ flash cards is a great resource, too. Pearson IT Certification offers a great set that you can find at www.pearsonitcertification.com/title/9781587132605.
How This Book Is Organized The CompTIA A+ certification has two paths to completion. Generally, people take the A+ Essentials exam first, and then the Practical Application exam. This book begins with the Essentials exam coverage in Day 31 to Day 15. Then Day 14 to Day 1 you prepare for the Practical Application exam. NOTE: Refer to the CompTIA website (www.comptia.org) for more information about the exam domains.
To aid in your exam preparation, use the calendars printed on the tearout card to map out each day of study. Also, before you take the Essentials and Practical Application exams, use the checklists on the back of the tearout to ensure you have a firm grasp of the exam topics.
This page intentionally left blank
Day 31 Storage A+ 220-701 Exam Objective Objective 1.1: Categorize storage devices and backup media
Key Points Today you learn the names, purposes, and characteristics of storage devices. Today is the first of many challenging days. It does get easier. The internal devices have many details, all of which are fair game on the CompTIA A+ exam. Faced with entering a cold swimming pool, a running-start, closed-eye, tucked-knee cannonball is a great way to get in the water (and impress your friends). So, take a big breath and hold your nose.
Storage Devices Storage devices include hard drives, floppy drives, nonvolatile random-access memory (NVRAM), tape drives, optical drives (CD and DVD drives), flash drives, and network drives.
Hard Drives The hard disk drive (HDD) has been a mainstay of PCs for a long time. Because of its widespread use, it is a big part of the A+ exam. Traditionally, the HDD stores the operating system and the bulk of data in the PC. It is mounted in a 3.5-inch bay, and connects internally through a parallel advanced technology attachment (PATA) channel. PATA interfaces are sometimes referred to as advanced technology attachment (ATA) or integrated drive electronics (IDE). Jumpers are used to determine the HDD’s designation as master, slave, or cable select. Most new PCs use a controller called serial ATA (SATA) for HDD and optical drives. SATA does not use jumpers or designations. Instead, SATA uses one header and one cable per drive. All HDDs work the same way. Arms move read/write (R/W) heads over the surface of spinning magnetic platters. These R/W heads either align molecules to create a positive charge (a 1) or leave it with a neutral charge (a 0), thus making the binary code. When reading, the heads float above the disks and feel the positive charges or no pull from the neutral.
Floppy Drives Incredibly, this is still on the exam. Luckily, there are just a few things to know about them. In many ways, a floppy disk drive (FDD) is like an HDD. It spins a disk, moves R/W heads across the surface, and stores data magnetically. There are two important differences: Capacity is limited to 1.44 MB, and the disk is removable by the end user. They mount in 3.5-inch bays that have access to the outside of the case.
2
31 Days Before Your CompTIA A+ Exams
A classic A+ question involves an FDD status light that stays lit all the time. The cable is oriented backward. Turn off the PC, unplug the FDD cable from the drive, flip it over, and plug it back in. Normally, the colored wire on the ribbon cable (pin 1) is closest to the Berg power connector. On the motherboard end, it should be oriented based on the numbers printed around the FDD cable header. Because there are 34 wires in an FDD cable, it is narrower than a PATA ribbon.
Solid-State HDD and NVRAM Ranging from small external universal serial bus (USB) devices to larger-capacity HDDs, solid-state drives are in reality NVRAM storage devices. NVRAM, often referred to as flash memory or flash RAM, is slower than RAM but still faster than traditional magnetic storage media. Unlike RAM, NVRAM can maintain its data when not powered. Solid-state drives are especially good for laptops where portability, performance, durability, and low power consumption are valued over price and drive capacity.
Tape Drives A magnetic tape is drawn across stationary R/W heads, but the same magnetic process takes place. The tape is removable by the user, but the drive remains mounted and connected to the PC. Tape capacity is large, comparable to HDDs, but access time is slow because of the sequential nature of tape media. These are primarily used as server backups.
CD, DVD, and BD Drives The basic optical drive is a compact disc read-only memory (CD-ROM). This CD-ROM drive reads premade discs and cannot write (burn) CDs. The CD can hold 650 MB or 700 MB of data. The CDROM drive mounts in a 5.25-inch bay and connects to the motherboard via a PATA or SATA interface. Digital versatile disc (DVD) has many more variations. The basic read and write letters still apply, but there are two formats: + and –. For our purposes, they are the same. Just note that they are not compatible with each other. Plus drives only read/write plus CDs. Newer +/– hybrid drives can read and write both. Generally speaking, DVD drives are backward compatible and can use CDs. A typical DVD holds 4.7 GB of data or 8.5 GB for double layered (on the same side). Blu-Ray disks (BD) can hold up to 50 GB of data. A Blu-Ray disk can contain 25 GB for a single layer and 50 GB for double layer. Optical media that is designated RW means it can be rewritten. If it is labeled with just an R that means once it is “burned” it cannot be changed. Table 31-1 compares CD, DVD, and Blu-Ray drives. Table 31-1
Optical Drives
CD Family
DVD Family
Blu-Ray Family
Need to Know
CD-ROM
DVD-ROM
BD-ROM
Can only read premade discs.
CD-R
DVD+/–R
BD-R
(Recordable) Write a disc once, and it is readonly after that.
CD-RW
DVD+/–RW
BD-RE
BD-RW (Rewritable) Read and write a disc repeatedly.
CDRAM (not an optical drive)
DVD-RAM
(“Endlessly” rewritable) Used primarily as surveillance-camera footage.
Day 31
3
Network Drives These drives are often referred to as remote, shared, or mapped drives. This means that the storage device resides on another computer, server, or other network device, not on the end user’s (local) PC.
Interfaces and Cables All storage devices in the computer are connected to the motherboard through cables. For your A+ exam, you just need to know a few basics about each cable. The term hot swappable means the drive can be connected and unplugged while the PC is running. Pin 1 is always the pin with the blue, red, or pink stripe. Both the device and the motherboard specify (usually with inhumanly small numbers) which side is pin 1. If no indication shows how to orient the cable, put pin 1 closest to the Molex power plug. Table 31-2 compares the features of different drive interfaces. Table 31-2
Drive Interfaces
Interface
Drives per Channel
Number of Pins
Hot Swappable
Need to Know (In Order of Importance)
PATA, ATA, IDE, EIDE
2
40
No
Old standard.
80
Two drives per channel. Jumpers assign master and slave drives.
SCSI
SATA
8 or 16
1
50
Yes
Typically found on servers.
68
Drives are arranged along a bus-like cable with terminators on both ends.
80
Jumpers or dip switches assign drive numbers in binary.
7
Yes
Small cable improves air cooling. Faster than PATA. One drive per channel. No jumpers, no master, and no slave.
FDD
1
34
No
Only for the FDD. Pin 1 is usually oriented closest to the power connector, but look for the red stripe. Some old FDD cables support multiple FDDs. They have a twist in the middle of the ribbon connectors.
4
31 Days Before Your CompTIA A+ Exams
Homework Each day there is some homework. Today’s homework is to memorize the information in Table 31-2.
Funwork Each day there is also some funwork. It is important that you see the wider scope of a career as an A+ technician. Computer repair is not just pocket protectors, badly repaired glasses, and screwdrivers. It is home theater, surveillance systems, cell phones, credit cards, Facebook, Xbox, and World of Warcraft. You’re studying not for the sake of memorizing facts and information, but to add to your technical skill sets and learn to enjoy what you do. And let’s not start with how cool cybersecurity is. Can you imagine what the music and entertainment industry would look like without computer geeks? Today, spend some quality time and observe all the ways computers touch our lives. Is there some “computery geekness” in medicine, military, banking, aerospace? How about a person using an iPad in a Starbucks to FaceTime a friend in Europe? Just imagine what goes on behind the scenes to make that happen. That is what we do. That is our world. We make that happen. That is some really cool stuff. Here’s another example of the results of our world. Right now, I am drinking coffee paid for via credit card in a Barnes and Noble. I am listening to Pandora Radio (Daft Punk’s Tron: Legacy soundtrack) on my cell phone with noise-canceling headphones. I’m on my favorite laptop using a wireless mouse and Microsoft Word, and just got a text from one of my students about her superfast gaming computer with six monitors. Do you see the bigger picture? This is our world, and it is awesome. Welcome.
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 3 and 11
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 3, 7, and 12
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapter 7
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapter 8
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 11 and 12
Day 30 Motherboards, Adapter Cards, Memory Slots, and Power Supplies A+ 220-701 Exam Objectives Objective 1.2: Explain motherboard components, types and features Objective 1.3: Classify power supplies types and characteristics
Key Points Today you learn the various components that make up computer motherboards, including the different interface and bus types. You also learn about the capacities and limitations of different motherboard form factors. On top of that, you delve into the different aspects and characteristics of computer power supplies, such as pinouts, adapters, and wattage. Strap your seat belts because here we go.
Motherboards Motherboards are the unsung heroes in the PC. If the CPU is the “brains” of the computer, the motherboard is the “heart” of the PC. It is responsible for practically all the communication and physical connections. The vintage Advanced Technology (AT) and Baby AT motherboards of the 1990s are not a major focus on the A+ exam. You need to know that they supported mostly ISA expansion cards and have 66-MHz buses. Advanced Technology Extended (ATX) motherboards have been continually upgraded and modified over the past 15 years. There have been letter designations along the way to thicken the alphabet soup. The ATX and its offspring make up the majority of the current marketplace. Table 30-1 describes the different motherboard form factors. Table 30-1
Motherboard Form Factors
Motherboard Name
Need to Know (In Order of Importance)
ATX
Introduced riser boards and daughter boards. Integrated keyboard, mouse, and video. Single 20-pin power-supply connection.
BTX (Balanced Technology Extended)
This progeny of the ATX is the most common motherboard on the market today. First to integrate SATA, PCIe, and USB 2.0. continues
6
31 Days Before Your CompTIA A+ Exams
Table 30-1
Motherboard Form Factors
continued
Motherboard Name
Need to Know (In Order of Importance)
NLX
Integrated AGP, NIC, and USB support.
Mini ATX
Smaller and fewer expansion slots than ATX.
Micro ATX
Even smaller than Mini ATX.
LPX
Expansion cards run parallel to the motherboard and can therefore fit in to a smaller case. Proprietary designs complicate repair. Typically must use original equipment manufacturer’s (OEM) parts.
Mini LPX
Smaller and fewer expansion slots than LPX.
The chipset and buses on the motherboard determine a great deal about the computer that is built around it. The general architecture of motherboards is a great source of A+ questions. Figure 30-1 shows the map of a motherboard, which is hierarchal. That means that it is organized from top to bottom in order of importance. Basically, the farther away a device is from the CPU, the less priority it has. Like the human body, the really important organs (devices) are inside, close to the core, and protected. Figure 30-1
Motherboard Map System Clock
CPU Front Side Bus (FSB)
Graphics Card Controller AGP or PCIe
Graphics Bus
Northbridge Memory
Memory
Memory Slots
Bus
SDRAM, DDR, RDRAM
Internal Bus HD Controller PATA, SATA SCSI
Southbridge
PCI
Input/Output
Bus
PCI Bus Controller
Integrated PCI Devices
Integrated PCI Video Super I/O Serial, Parallel, PS/2 FDD
BIOS
PCI Expansion Slots
Audio, NIC, USB
Day 30
7
The CPU is only a processor, fast but not able to do anything but follow instructions. It uses a clock like a metronome to keep everything synchronous (on the beat), just as a marching band uses drums to stay together. The clock rate is the actual speed of the processor. The speed of this clock is measured in gigahertz (GHz) and is either set by jumpers (like those on PATA drives) on older systems or in the basic input/output system (BIOS) in newer PCs. The front-side bus (FSB) is the front door to the CPU. The width of the FSB determines whether the chip is a 32- or 64-bit processor. The speed of this bus is critical to the performance of the PC. All too often, novice technicians or manufacturers trying to save money build and sell super-fast processors on cheap motherboards that have very slow FSBs. This is akin to driving a race car on a one-lane dirt road. The northbridge controls two of the most important tasks on a PC: It sends instructions from RAM to the CPU, and it sends graphic data to the video card. The video card is a fast, dedicated card very much like a small motherboard complete with RAM and a graphic processing unit (GPU). Video cards often have their own cooling system. This allows the PC to worry about tasks other than constantly redrawing the monitor 60 or more times a second. RAM often has its own group of devices to support ever-faster access times and increasing capacities. The other requests and data that are not RAM or video are forwarded on to the south bridge. That is where storage devices, adapter cards, and ports are located. This is collectively referred to as the input/output (I/O) controller. If your PC is using the integrated video, all that data must be processed by the south bridge. It is often busy with HDD and CD data, network traffic, and so on. Using AGP or PCIe cards tied into the northbridge used for video greatly increases the overall efficiency of the machine.
Adapter Card Interfaces Whereas there are countless ports and external devices, the number of expansion slots though which adapter cards and motherboards connect is finite. What you need to know about adapter cards and interfaces is explained here in order of learning importance. Check out Chapter 3 in the Cisco IT Essentials v4.0 course curriculum for great photos of these cards. You should be able to identify them by sight and description. Table 30-2 describes the internal side of the cards and the kinds of expansion slots. Table 30-3 describes adapter cards found on the A+ exam. Table 30-2
Expansion Slots
Adapter Card/Bus Name Bus Width
Need to Know (In Order of Importance)
PCI
64
Current standard, 32 bit and 64 bit, shorter than ISA.
32
Usually white. 32 bit have two inline slots; 64 bit have 3.
AGP
32
Dedicated graphics card slot, 32 bit, shorter than PCI. Brown. continues
8
31 Days Before Your CompTIA A+ Exams
Table 30-2
Expansion Slots
continued
Adapter Card/Bus Name Bus Width
Need to Know (In Order of Importance)
PCIe
x1
Full duplex lets data be sent and received simultaneously.
x4
Measured in throughput as a multiple of 250 MBps.
x8
For example, an x4 PCIe slot and card can transfer data at 1000 Mbps.
x16
(250 MBps × 4 = 1000 MBps)
EISA
32
Old technology, slot 8- and 16-bit versions (32-bit EISA).
ISA
16
Black.
8
Common in older PCs.
32
Old proprietary IBM version competitor of 32-bit EISA.
MCA
Table 30-3
Adapter Cards
Adapter
Uses These Buses
Need to Know (In Order of Importance)
NIC
PCI, PCIe, or USB
Connects the PC to a network.
Wireless NIC
PCI, PCIe, or USB
Connects a PC to a wireless network.
Video adapter
PCIe, AGP, or PCI
Translates data into video signals for the monitor.
USB
PCI or PCIe
Is an adapter in this case. Like a SCSI, it forwards data on to another kind of bus. It often provides both internal and external USB ports.
FireWire
PCI or PCIe
Is similar to USB but nearly twice as fast. Commonly used to transfer video or other data-intensive applications.
Sound/audio adapter
PCI or PCIe
Translates data into audio signals for speakers.
SCSI adapter
PCI or PCIe
Is an additional bus link, like a transfer station. It forwards data to and from the PC to SCSI HDDs and devices.
RAID adapter
PCI or PCIe
Controls the spreading of data across multiple HDDs. Commonly used for SCSI but can also be used for SATA.
Modem
PCI or USB
Is like a combination NIC and sound adapter. It connects the PC to an audio/telephone-based network.
Parallel port
PCI
Connects peripheral parallel devices to the PC. Although somewhat rare today, it was the predominant method to connect to printers, scanners, and fax machines. The distinctive cable has a 25-pin D plug on the computer end and a 36-pin Centronics port on the other. Moves data along multiple channels simultaneously (parallel).
Serial port
PCI
Connects peripheral parallel devices to the PC. Not commonly used today. Moves data along one channel, bit by bit (serial).
Day 30
9
Memory Slots The motherboard dictates which CPU and memory the system uses. There are many different kinds of memory, and each requires its own kind of slot. Single inline memory modules (SIMM) are the old standard (pre-1999). There is a 30-pin version and a 72-pin version. RAM modules are always used in pairs. SIMMS, therefore, must be installed in pairs: literally two identical RAM chips installed side by side. Modern RAM uses dual inline memory module (DIMM) technology. The contacts are printed on both sides of the RAM chips, eliminating the need for pairing. Table 30-4 compares the different types of memory slots. Table 30-4
Memory Slots
Slot Type
Need to Know (In Order of Importance)
DIMM
Most common form factor for RAM. Contacts on both sides of the module. SDRAM and DDR, DDR2, and DDR3 RAM use DIMMs. Many different variations of DIMMs, none compatible with another.
SODIMM
Small outline DIMM (SoDIMM) is a smaller form factor designed for laptops. Some laptops can also use DDR, DDR2, and DDR3 RAM.
MICRODIMM
Very small, used in subnotebooks.
RDRAM
RAMBUS dynamic RAM (RDRAM), also called RAMBUS inline memory module (RIMM). Used in game systems because of its speed. RIMMS are also used in some desktop computers. Today it is rare, fast, expensive, and comparable to DDR3. On an RDRAM motherboard, empty RAM slots need to be filled with modules called continuity RIMMs (CRIMM).
SIMM
Very old; requires installation of RAM in pairs.
Power Supplies Power supplies switch alternating current (AC) power from the wall to direct current (DC) power for the PC. There is a switch on the outside of the power supply that chooses 115 volts (V) AC in North America versus 230, the European standard. A switch near the power plug allows power supplies to accept U.S. or European standards. Power supplies are measured in watts (W); the more watts, the better. You need to provide more watts than the PC consumes. A 500-W supply is about standard. Gaming systems and other high-end graphics applications tend to use more than that.
10
31 Days Before Your CompTIA A+ Exams
The standard form factor for power supplies is the ATX. A 20-pin block connects the motherboard. Another small block of four to eight pins lets the BIOS and OS control the power supply. The communication between computer and power supply is called advanced configuration and power interface (ACPI). All the other devices in the PC are powered by 12V yellow, 5V red, and a black ground wire. There are two sizes of plugs: Molex and Berg. Molex is bigger than Berg. An easy trick to remember this is that the name Molex (five letters) is longer than the name Berg (four letters). Newer power supplies provide special 15-pin power connectors for SATA drives. You can power SATA HDDs with either, but not both. NOTE:
If a computer cannot remember its time and date, replace the BIOS battery.
Use a multimeter to test the DC output. Set the multimeter to read volts DC (20V DC on older, non-auto-ranging multimeters). Put the common lead on the black ground wire or directly on the chassis (metal frame). The chassis is the electrical ground. Use the test lead to contact the other colors on a plug. The colors should read as shown in Table 30-5. Table 30-5
Power-Supply Voltages
Color
Voltage
Mnemonic
Yellow
+12V
You
Red
+5V
Really
Orange
+3.3V
Oughta
Black
0V
Believe
White
–5V
Warren
Blue
–12V
Buffett
Green, gray, and purple are signal wires and standby features, so they are not a major focus on the A+ exam. To test the wall outlet, the multimeter must be set to read volts AC. Connect the black common lead on the round ground hole or the large (neutral) slot, and put the test lead in the small (phase) slot. A properly functioning outlet in North America should read 110V to 120V VAC. In Europe, it is 220V AC. In the absence of a multimeter, use a working lamp or appliance to test the outlet. CAUTION: These colors are not standard among all electrical systems. The black ground in DC should never be confused with the black wire in AC systems that carry 110V, usually at 20 amps or more, which is more than enough to kill you. CAUTION: A technician should never, ever open three specific PC components: the power supply, laser printers, and cathode-ray tube (CRT) monitors. These contain capacitors and charges that are still “live,” even when unplugged. The A+ exam uses these as distracters.
If you are not fully confident about electricity, find an experienced electrician and ask for a fuller explanation. You need to “own” this knowledge to be a PC technician.
Day 30
11
An uninterruptible power supply (UPS) is an external battery-powered device that supplies power to computer and network devices during a power outage. These devices are frequently used on mission-critical devices such as servers and routers. UPS power is usually limited to about 30 minutes and is normally designed to provide enough power to automatically shut down the PCs. For extreme cases, diesel generators are used to generate “unlimited” electricity (provided unlimited fuel is available) for banks, air traffic control, hospitals, and so on.
RAID Adapters Redundant array of independent (or inexpensive) discs (RAID) has several defined levels, but the most common are 0, 1, and 5. RAID 0, which is also called striping, writes the data across two drives. This increases read and write speed but does not provide any protection. Think: “Zero” provides “zero” protection from data loss. Striping is the technique used to write the data across multiple disks. Consider that the processor is usually faster than the HDD, so it uses multiple HDDs simultaneously to handle the load. RAID 1 is also called mirroring. Mirroring simply copies one HDD to the other. Think of looking at “one’s” self in the “mirror.” All data that is written to the first drive is also written to the second. This provides data protection if one drive fails, but it costs twice the amount of overhead because you’re maintaining two drives for the same data. Parity, as it does in RAM, adds 1 bit to the bytes to make everything either even or odd. It reduces access time but identifies data loss and corruption and is therefore more reliable. In RAID 5, there are at least three HDDs. This is so that all the parity can be kept separate from the data. RAID 5 also stripes data, so it enhances performance somewhat and it spreads out the data in case of failure. However, the constant parity updating lowers overall performance. RAID 5 is the most common implementation. Hybrids such as RAID 1+0 and 0+1 exist, and they require at least four HDDs because they are either two striped disks that are mirrored to two others (0+1) or they are two mirrored disks striped to two others (1+0).
Homework 1. Practice drawing the motherboard map from memory. 2. Practice the power-supply mnemonic until you can re-create the chart from memory. 3. Wiki the ATX and BTX motherboards. 4. Have someone quiz you on the PCI, PCIe, AGP, and ISA need-to-know details. 5. Have someone quiz you on the wire colors and voltages.
12
31 Days Before Your CompTIA A+ Exams
Funwork This book contains several build-a-PC activities. You don’t need to actually purchase the equipment. These activities are like fantasy football or using a website to customize a car or shoe without actually buying it. These activities are designed to immerse you in the details and force you to “speak” your future language. The first build-a-PC exercise is for a high-end, money-is-no-object, over-the-top (imaginary) game system. Start by reading online techie forums about video cards and motherboards. Immerse yourself in geekspeak, and it will get easier to understand. Ask techies questions, but watch out for IT bravado. Many hard-core techies are not kind to newbies. Also understand that these dream machines are not really tested on the A+ exam. State-of-the-art expert opinion and the A+ exam seldom line up. It is like asking a NASCAR driver how to parallel park for your driver’s license exam. “Purchase” a motherboard and power supply. Keep in mind that the motherboard determines the kind of storage interfaces, adapter cards, and RAM you can use in the future. Hint: The FSB and video adapter and RAM bus are common bottlenecks. Choose carefully. Next, figure out what kind of case and power supply best suits your needs. Tomorrow, we add RAM and install the devices. Good luck and have fun. Check out computers by Alienware and other game-oriented PCs to see how the pros build them and to check your work.
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 1 and 9
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 3, 5, and 9
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapters 2 and 4
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 1, 4, and 5
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 9 and 10
Day 29 Processors and Cooling A+ 220-701 Exam Objectives Objective 1.4: Explain the purpose and characteristics of CPUs and their features Objective 1.5: Explain cooling methods and devices
Key Points The CPU is arguably the most important component of a PC. It is known as the “brains” of the PC. In truth, it simply follows instructions very, very quickly. It is not actually intelligent, but nonetheless is very important. Cooling is an equally important aspect of a computer system. Processing draws power and creates heat. Heat in excess can destroy things. Cooling is an oftenunderappreciated but a mission-critical part of the computer system.
Central Processing Unit CPUs connect to the motherboard in only two ways. A socket is designed to receive flat, square, tile-like CPUs with hundreds of tiny pins on one side. The socket uses zero insertion force (ZIF) to avoid bending pins during installation. The latching lever sits alongside the socket. Pull it away from the socket to free the catch. Then move the lever upward to release the CPU. The CPU sets into the pin grid array (PGA). During installation, note the orientation with the missing pin in the corner. The lever is returned to its position. Thermal compound is used to help transfer heat from the CPU to the heat sink. This material is toxic, and gloves should be used. The slot-style CPUs are built to receive a blade that contains the contacts. They simply slide in guided by posts and snap into place. Slot-style CPUs were common on older motherboards. Table 29-1 shows CPU socket and slot specifications. Memorizing these specifications is universally disliked by A+ exam candidates. If you are good at memorizing, enjoy. For the rest of us, here are some patterns and tricks: ■
PGA and the first number in the number of pins are almost always the same in the early CPUs.
■
PGAs are always square (21 × 21) and the newer ones are simply a number (949 grid PGA).
■
Slots do not use PGAs (because they are slots).
■
Socket 6 is not used at all and is not likely tested.
■
In general, the newer the CPU, the less voltage it uses.
■
The names of the newer connectors include the number of pins (socket 370, for example).
14
31 Days Before Your CompTIA A+ Exams
Table 29-1
CPUs
Connector
CPU
Pins/Package
Socket 4
Pentium 60/66
273 pins 21 × 21 PGA
Socket 5
Pentium 75/90/100/120/133
320 pins 37 × 37 SPGA
Socket 7
Pentium MMX, AMD KS, Cyrix M
321 pins 37 × 37 SPGA
Super Socket 7
AMD KS-2, AMD KS-III
321 pins 37 × 37 SPGA
Socket 8
Pentium Pro
387 pins 24 × 26 SPGA
Socket 370 or PGA 370 Socket
Pentium III FC-PGA, Celeron PPGA, Cyrix III
370 pins 37 × 37 SPGA
Slot 1 or SC242
Pentium II, Pentium III
242 pins 2 rows
Slot A
AMD Athlon
242 pins 2 rows
Socket A or Socket 462
AMD Athlon and Duron
462 pins SPGA
Slot 2 or SC330
Pentium II Xeon, Pentium III Xeon
330 pins 2 rows
Socket 423
Pentium 4
423 pins 39 × 39 SPGA
Socket 478
Pentium 4
478 pins micro PGA (mPGA)
Socket PAC418
Itanium
418 pins
Socket PAC611
Itanium 2
611 pins
Socket 603
Xeon DP and MP
603 pins
Socket 754
AMD Athlon 64, Sempron, Turion 64
754 pins PGA
Socket 775 or Socket T
Pentium 4, Celeron D, Pentium 4 Extreme Edition, Pentium D, Pentium Extreme Edition, Core 2 Duo, Core 2 Extreme
755 pins LGA
Day 29
Connector
CPU
Pins/Package
Socket 939
AMD Athlon 64, Athlon 64 FX, Athlon 64 X2, Opteron, Sempron
939 pins PGA
Socket 940
AMD Athlon 64 FX and Opteron
940 pins PGA
Socket AM2
AMD Athlon 64, Athlon 64 X2, Athlon 64 FX, Sempron
940 pins PGA
Socket F
AMD Athlon 64 FX, AMD Opteron
LGA 1207
Socket AM2+
AMD Athlon 64, AMD Athlon X2, AMD Phenom, AMD Phenom II
PGA 940
Socket P
Intel Core 2
PGA 478
Socket 441
Intel Atom
PGA 441
LGA 1366/Socket B
Intel Core i7, Intel Xeon
LGA 1366
Socket AM3
AMD Phenom II, AMD Athlon II, AMD Sempron
PGA 941
LGA 1156/Socket H
Intel Core i7, i5 and i3, Intel Xeon, Intel Pentium, Intel Celeron
LGA 1156
Socket G34
AMD Opteron
LGA 1974
Socket C32
AMD Opteron
LGA 1207
LGA 1248
Intel Itanium
LGA 1248
15
The reality is technicians always refer to the documentation to verify compatibility before purchasing CPUs and motherboards. A quick lookup is well worth avoiding a pricey mistake.
RISC and CISC There are two families of CPUs: ■
Complex Instruction Set Computing (CISC)
■
Reduced Instruction Set Computing (RISC)
When asked to multiply 4 × 5, a CISC chip spends more time looking for the multiplication tool among the many possible methods than completing the task quickly. A RISC quickly finds the addition tool among the fewer options available to it and adds 4 + 4 + 4 + 4 + 4. The calculation takes longer, but locating the tool took less time. RISC is outstanding for repetitive tasks such as packet routing in Cisco routers, display adapters, and servers. CISC chips are great for multipurpose PCs that face many different kinds of requests. Most CPUs are CISC, but only recently did Macintosh switch. For many years, it used RISC chips by Motorola. Today, Intel and American Micro Devices (AMD) dominate the PC CPU market.
Processors Like engines on a race car or fighter jet, processors are the constant talk of geeks worldwide. It is a fast-moving and exciting field. Just imagine how many processors it takes to stream video from
16
31 Days Before Your CompTIA A+ Exams
YouTube to your cell phone. All those servers, routers, switches, cell towers right to your phone. That is pretty cool. A core is the actual processing technology. Many chips have dual, triple, quad cores. The trend is bound to continue. As of this writing, anywhere from 6 to 24 cores can be found on a chip. And that is just what is available in the consumer market. Some motherboards support many CPUs. Each CPU can have many cores. Hyperthreading allows preprocessing chips to divide jobs into smaller pieces and send them to the many cores for processing. Cache is like a quick reference for commonly used commands for the cores. Nowadays, level 1 and level 2 cache is located on the CPU near the cores. Level 3 is additional memory found on the motherboard. Cache uses static RAM, not dynamic RAM like the system memory. The rated speed and the actual speed vary based on many factors, including bandwidth, clock speed, front-side bus speed, and onboard cache. The clock speed is often regulated by usage, heat, CPU internal architecture, and the bus clock speed. There are both 32-bit and 64-bit processors on the market. The 32-bit processors are called x86. The 64-bit processors are called x64.
System Resources Interrupt request (IRQ), I/O address, and direct memory access (DMA) are system resources. Initially, these were set manually. Since Plug-and-Play (PnP) was introduced in 1995, however, we no longer need to manually set these system resources unless using a vintage device that is not PnP compatible. Again, use your time wisely when studying for this exam. These are seldom seen on modern A+ exams, but they are sometimes used as distracters. Table 29-2 lists the IRQ values, Table 29-3 lists the I/O port address values, and Table 29-4 lists the DMA channels. Table 29-2
IRQ
IRQ
Value
0
System clock
1
Keyboard
2
Cascaded with IRQ 9 (free)
3
Serial communication port 2 and 4
4
Serial communication port 1 and 3
5
Sound card or parallel port 2 (LPT 2)
6
Floppy disk
7
Parallel port 1 (LPT 1)
8
Real-time clock
9
Cascaded with IRQ 2 (free)
10
(Free)
Day 29
IRQ
Value
11
(Free)
12
Mouse
13
Math coprocessor
14
Primary IDE channel
15
Secondary IDE channel
Table 29-3
I/O Port Addresses
I/O Address
Value
Com1
03F8–03FF
Com2
02F8–02FF
Com3
03E8–03EF
Com4
02E8–02EF
LPT1
0378–037F
LPT2
0278–027F
Table 29-4
17
DMA Channels
Channel
Use
0
Sound
1
Sound
2
Floppy disk
3
LPT1
4
Cascade to DMA 0–3
5
Sound
6
(Free)
7
(Free)
Cooling Systems An expression among the PC gamers is that “There is no such thing as overheating, just inadequate cooling.” A heavy processing load makes the CPU/GPU draw more power, and that generates more heat. Servers, multimedia-providing computers, and laptops are typically the most common PCs to have heat issues. In the case of laptops, overheating is often caused by a lack of airflow because they are used in extreme environments and they tend to sit on warm laps or blankets that smother air vents.
18
31 Days Before Your CompTIA A+ Exams
The biggest cause of heat in a normal desktop or tower case is lack of air flow because of dust. Dust is slightly statically charged and sticks to everything inside a PC, especially the heat sink. This creates a thick layer of insulation exactly where you need it least. When you are asked about this issue on the A+ exam, the correct response is to use a can of compressed air (right-side up) to blow out the dust bunnies. If you actually need to do this, stand way back, or better yet get the rookie to do it (because it will soon rain dusty bits all over the place). Specialized vacuums designed to work around computers do not generate static electricity and can be used safely in the PC case, but don't try using your home vacuum cleaner for this task. It will clean out your computer case and probably fry the motherboard at the same time. NOTE: Household vacuums generate a great deal of electromagnetic interference (EMI) and ought not be used in or around PCs.
Laptop power supplies are tricky. Heat, size, and weight are always limiting factors. It is critical to keep the vents unblocked and lint free. Some laptops use a heat pipe that directs heat away from the CPU toward fans. Without the fan, the air will flow only by convection, which the cases are not designed for. Look at the spinning fan and make sure it is pushing air through the heat sink and that the power-supply fan is blowing air out of the case. Make sure the vents from the heat pipe are unblocked. Also make sure cables are not resting alongside the blades, because if they are they will make a whining or lawnmower noise. On most motherboards, the CPU’s temperature is measured, and the BIOS will shut off the PC if it gets too hot. A classic A+ question asks why a PC would turn on and shut off automatically after running for a few minutes. Check the cooling fan. Higher-end motherboards monitor the temperature and scale the processor speed (clock rate) so that it is the highest possible without getting too hot. When done correctly, water-cooled systems are highly effective. However, if there is air in the lines, or not enough fluid in the reserve, an otherwise great computer may overly heat and burn up. Further, we tempt fate when we mix water and electronics.
Homework If you are a memorizer, count your blessings and memorize all those processors. If not, just review the list of patterns and tricks that appears immediately before Table 29-1. Find out what kind of cooling system your computer has.
Funwork Today, add a top-of-the-line CPU or two or four depending on the motherboard you “bought” yesterday. If you did your research, you know exactly which processor you want. If not, go to that monster CPU chart (Table 29-1) and rethink your motherboard purchases. They must be compatible, period. Keep in mind that you will purchase RAM tomorrow. A really good idea is to purchase DDR3 and 4. If you use an x64 processor, you can have considerably more RAM. When you are building a PC, you need to consider many factors. That is why it is somewhat of a rite of passage in the computer geek world.
Day 29
19
What kind of cooling system are you going to use for your mammoth gaming system? If you brought your big boy or big girl pants, get on that water cooling. Make sure that you do not have any leaks. Been there, done that. Lost an awesome PC and many, many cool points among friends.
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapter 1
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 3 and 5
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapter 2
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 1, 6, and 9
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 5 and 10
This page intentionally left blank
Day 28 Memory A+ 220-701 Exam Objective Objective 1.6: Compare and contrast memory types, characteristics and their purpose
Key Points Today you learn more than any sane person should know about system memory. The concepts are important to understand because purchasing the wrong RAM is catastrophic to the performance of your computer. RAM is the PC’s workspace. It should be large enough to accommodate far beyond the user’s needs, and it should be as efficient and fast as the user can afford.
Memory Memory is the third part of the trinity: The processor, motherboard, and memory make up the heart and soul of the PC. In fact, if those were the only things in a computer, it would go about its business just fine. Granted, there would be no way to store data or communicate with other computers, let alone humans, but who would want to do anything like that? Like the various adapter cards and slots, there are many different kinds of memory, each with its own capabilities and unique slots. There are two families of RAM: dynamic (DRAM), which loses its data when unpowered; and static (SRAM), which maintains it data regardless of power supply. The standard RAM for many years was called SDRAM. In this case, the S stands for synchronous (in step with the system clock), not static.
RAM RAM is a special storage device in almost every way. It is volatile, which means when the power is off, the data is lost. This might seem like a problem, but it lets the computer restart and recover from software errors. If the RAM were nonvolatile, the errors would still exist after a reboot. Therefore, RAM really is not a storage device; it is more of a short-term memory, a place for the CPU to do its work. To correct a common misperception, RAM does not make the PC run faster unless the reason it was slow was due to a lack of RAM. The computer runs faster only by increasing the clock rate of the CPU, increasing the motherboard bus speed, or if you replace the CPU with a faster one. More RAM allows the computer to run more software simultaneously. However, when your computer has “minimal” RAM, adding more improves overall performance. A 4-GB memory maximum applies to 32-bit processors. That limitation is more a hardware issue than an OS issue. Windows Vista, Windows 7, Macintosh OS X, and many Linux distributions
22
31 Days Before Your CompTIA A+ Exams
have 64-bit versions that can run 64-bit processors. A 64-bit CPU and supporting system can address 16 exabytes (EB) of RAM. The computer always measures RAM in bytes (with no multiplier). We speak of RAM with multipliers. The actual amount of RAM varies slightly from the amount specified on the actual chip that is specified in bytes and multipliers. Table 28-1 lists different styles of RAM. Table 28-1
RAM
Memory Type
Need to Know (In Order of Importance) or Technology
DRAM
Dynamic RAM means no power = no data.
SRAM
Static RAM exhibits data remanence but is still volatile. More expensive and slower than DRAM. Is the basis for solid-state HDDs and flash memory.
SDRAM
Synchronous DRAM is the standard for most PCs today.
DDR
Double data-rate is the standard for good PCs today. DDR2 and DDR3 are faster versions of DDR.
Parity
Parity adds a bit to each byte so that they all equal an even number. A technique for checking for corrupt data. Slower and more expensive than regular RAM but more reliable.
ECC
Error correction code detects and fixes corrupt data in RAM. Slower and more expensive than regular RAM but more reliable.
EDO
Extended data output is an older technology that made more efficient use of the RAM.
FPM
Fast page memory is an older technology that transfers data more quickly.
Speed Like the speed of the CPU, RAM speed is not exactly as advertised. Certain variables govern the actual speed. Table 28-2 lists RAM and their speeds. Table 28-2
RAM
RAM
Speed
PC100
100 MHz
PC133
133 MHz
DDR-PC2100
266 MHz
DDR-PC2700
333 MHz
DDR-PC3200
400 MHz
DDR2-PC2-5400
667 MHz
DDR3-PC3-12800
1600 MHz
Day 28
23
Virtual RAM Virtual RAM is a copy of the contents of RAM on the HDD to aid in reliability and data recovery. Unless you’re experiencing significantly poor performance on your computer, let the OS set the amount of virtual RAM it needs. The amount of virtual RAM is usually twice the amount of installed RAM. Because the virtual RAM is memory copied to the HDD, it must be in the form of a file. The copied RAM data appears in HDD as page files or swap files. In other words, page/swap files and virtual RAM are the same.
ROM ROM is reliable and always there regardless of version, flashing, power on or off, and so on. The problem with ROM is if the technology grows beyond the capabilities of the permanently written instruction set, you must upgrade (replace) the complementary metal-oxide semiconductor (CMOS) chip or perhaps the entire motherboard. Therefore, ROM instruction sets are kept to a minimum.
EEPROM Although manufacturers burn ROM into chips, erasable programmable read-only memory (EEPROM) is memory that you can flash via software and rewrite. This allows the BIOS to grow and adapt as newer, faster, and bigger devices are developed. A classic troubleshooting question involves a client with a new and much larger HDD that the BIOS does not recognize in spite of the correct jumper and IDE settings. Use the software on CDs that came with the HDD or that you download from the BIOS/HDD manufacturer’s website to flash the BIOS (EEPROM) with an updated version. CAUTION: Be careful when flashing the BIOS. An older BIOS chip can become unstable if it doesn’t support the BIOS version used in the flash. This would make your computer unusable, and your only option would be to replace the chip.
NVRAM Nonvolatile RAM (NVRAM) is used for instructions that change over time. The best example of this is the size of the HDD. (Note that the A+ exam refers to size as capacity, not physical volume.) RAM is used as a failsafe. In the event of some BIOS failure, you can reset the RAM parts of the BIOS by jumper or by removing the battery, but the NVRAM does not change until it is flashed. (Do not forget, data stored in RAM requires power to stay there, and hence the battery.) These include the IDE settings, time and date, system password, and other features of the BIOS. A combination of RAM and NVRAM allows for a stable, editable, and flashable BIOS chip. Here is a classic A+ exam scenario: If you have a computer that forgets information when it reboots, such as where the boot sector is or the time and date, you might need to change the battery. You can also clear NVRAM by moving the appropriate jumper to the clear position. See the motherboard’s documentation to locate the jumper.
Memory Slots The motherboard dictates which CPU and memory the system uses. There are many different kinds of memory, and each requires its own kind of slot.
24
31 Days Before Your CompTIA A+ Exams
Modern RAM uses dual inline memory module (DIMM) technology. The contacts are printed on both sides of the RAM chips, eliminating the need for pairing. RAM can use multiple channels to increase the access speed. Like adding lanes in a highway, this results in more throughput. Table 28-3 compares the different types of memory slots. Table 28-3
Memory Slots
Slot Type
Need to Know (In Order of Importance)
DIMM
Most common form factor for RAM. Contacts on both sides of the module. SDRAM and DDR RAM use DIMMs. Many different variations of DIMMs, none compatible with another.
SODIMM
Small outline DIMM (SoDIMM) is a smaller form factor designed for laptops.
MICRODIMM
Very small, used in subnotebooks.
RDRAM
RAMBUS dynamic RAM (RDRAM), also called RAMBUS inline memory module (RIMM). Used in game systems because of its speed. Today it is rare, fast, expensive, and comparable to DDR3. On an RDRAM motherboard, empty RAM slots must be filled with modules called continuity RIMMs (CRIMM).
SIMM
Very old; requires installation of RAM in pairs.
Homework 1. Review the different types of memory. 2. Know the differences between SRAM, DRAM, and SDRAM. 3. Compare the different slots and know the number of pins in each.
Funwork So, you’ve collected all the components to build your dream computer. You have a CPU that is smarter than you are, a motherboard that can handle quad-processor cores with an attitude, a griddraining power supply, a water-cooling system that looks like the head of a Borg drone, and it is all awaiting RAM. (No pressure.) How many and what kind of RAM slots are on your motherboard? Find the type of RAM that has the fastest speed and the greatest capacity, and load it up. When you build your first computer system, email the specs and a picture to me at
[email protected]. I love this kind of stuff. Operating systems are cool in their own way. But, it
Day 28
25
is hard not to appreciate the beauty of raw processing power in modern PCs. I’m still waiting to see a DIY computer that maxes out the 16-EB limit. Was the term Borg drone a Google opportunity? In other words, if you do not know what it is, Google it. Science fiction and the world of technology have a long history. Don’t get left out of the techie “in” club!
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapter 1
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapter 6
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapter 6
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapter 7
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapter 6
This page intentionally left blank
Day 27 Displays, Peripherals, and Adapters A+ 220-701 Exam Objectives Objective 1.7: Distinguish between the different display devices and their characteristics Objective 1.8: Install and configure peripherals and input devices Objective 1.9: Summarize the function and types of adapter cards
Key Points No question about it: Computers are no-nonsense, number-crunching geniuses. If they do not have to interact with the outside world, they are all too happy not to. For us to realize the potential of the smart silent types, we need them to speak “human.” Enter peripherals. These external devices and the technology that serves as a go-between (adapters and drivers) enable us to talk to them and them to talk to us in our own language and as efficiently as “humanly” possible.
Resolutions Video cards have a basic resolution, usually 640x480 or 800x600, with 256 colors. Sometimes, it is as few as 8 or 16 colors. In any case, it is enough to see what you are doing while you install the correct drivers. When the drivers, and by extension the OS, control the video card, resolutions can go much higher depending on the quality of the card and capabilities of the monitor. Table 27-1 shows the resolutions you need to know for the A+ exam. Table 27-1
Monitor Resolutions
Name
X Pixels Wide
Y Pixels Tall
VGA
640
480
SVGA
800
600
XGA
1024
768
XGA+
1152
864
SXGA
1280
1024
SXGA+
1400
1050
UXGA
1600
1200
QXGA
2048
1536
28
31 Days Before Your CompTIA A+ Exams
These all are 4:3 aspect ratios. Many new computers and laptops use a 16:9 aspect ratio (HDTV/widescreen). After the correct drivers are installed, an LCD screen really should be run in its native mode. There are many exotic, nonstandard resolutions as well, including on a cash register, a cell phone, and a dashboard display in a car. The 4:3 screens are measured diagonally. All others are measured by width. Projectors typically have low resolution. Most do not exceed 800x600. Seldom does a need arise for huge screens with postage-stamp-size icons in a presentation environment.
Peripheral and Input Devices Peripherals are devices that connect to ports. Note that even though wireless devices connect to ports wirelessly, they are ports nonetheless. Peripheral devices fall into two categories: ■
Input: An input device enables us to communicate with a binary-speaking PC. For example, keyboards and mice are considered input devices.
■
Output: An output device presents binary data in a form that humans can understand. For example, monitors and speakers are considered output devices.
From the PC perspective, outgoing is output, and incoming is input. Input and outputs are often found in devices that work with the same media (documents, video images, sound), but one is used for input, and the other is used for output (for example, scanners and printers, video cameras and monitors, microphones, and speakers). Combinations of these technologies create hybrid I/O devices. A networked printer/scanner is an all-in-one office printer. A touchpad/monitor is a device we typically call a touchscreen. A cell phone is a wirelessly networked, video camera/monitor microphone/speaker device.
Mouse and Touchpad A mouse is an input device that connects to the PC through USB, wireless infrared (IR), radio frequency (RF), or PS/2 port. A mouse comes in many styles, but the two most common are a trackball mouse and an optical mouse. Trackballs get dirty and need to be cleaned with alcohol and cotton swabs. Optical mice tend to work better on patterned surfaces. Wireless devices drain batteries quickly, or they need a recharge cradle of some kind. The touchpad is ideal for laptops. Touchscreen monitors are basically a clear touchpad that is part of a monitor.
Keyboard A keyboard connects to the PC in the same ways as a mouse. Keyboards have different technologies that make them more comfortable, spill resistant, small, and so on. Nonetheless, they all function by actuating buttons that translate into binary codes.
Adapter Cards It might seem obvious, but the first step in troubleshooting any peripheral is to make sure it is connected and has power. Many computer geeks have been foiled by this simple fact even if they do not admit it. The writers of the A+ exam know this common oversight and often include it in a check-all-that-apply kind of question. Watch for it.
Day 27
29
PCI and PCIe Cards Although modern motherboards commonly use the PCIe bus, you will still encounter and have to install or replace PCI adapter cards on older PCs. Also, you will find a PCI and PCIe bus coexisting on the same motherboard to allow the use of a legacy PCI device that might not have a PCIe equivalent. PCI and PCIe buses are not compatible because PCI uses parallel communication while PCIe uses serial. You cannot install a PCI adapter card into a PCIe bus for that reason, plus the adapter card slots on the motherboard are different sizes. Despite their differences, PCI and PCIe adapter cards are both used to add a peripheral device to a PC. Both card types are used to add a wide variety of peripherals, including modems, network interface cards (NIC), SCSI controllers, and so forth. The vast majority of adapter cards today are PCIe cards.
AGP Cards This motherboard bus also allows adapter cards to be installed, but AGP cards are typically used to install video adapters. AGP cards are becoming less common and are being replaced by PCIe adapter cards, but you might need to add or replace an AGP video adapter on an older PC from time to time. Even on these older computers, only one AGP slot is usually available, and AGP adapter cards are not compatible with PCI or PCIe motherboard slots.
Sound Cards Many motherboards come with an integrated sound card, but you might need to install a sound card in a PC so that the computer can provide higher-quality sound output. Sound cards can support a variety of sound formats, such as MP3, MIDI, and WAVE. These adapter cards also provide microphone and speaker ports and ports for musical instruments. High-end sound cards can support up to five speakers for realistic “movie theater” sound.
TV Tuner Cards A TV tuner card is a type of capture card (as discussed next) that can be installed in a PC to enable you to watch TV on the computer. This adapter card serves the same purpose as the tuner in a traditional TV, allowing the computer to be connected to cable or a digital antenna to receive television transmissions. This type of card is sometimes used to allow TV programs to be recorded directly on the PC’s hard drive or other storage device. These cards can be PCIe cards, but some can use a USB interface.
Capture Cards This type of adapter card is used to receive video input for computers or game consoles. In many cases, video capture cards are TV tuner cards, but they can also be used to capture video from digital camcorders or even VHS. This type of card can add DVR or TiVo functionality to a PC and can allow the computer user to edit video files. Video capture cards can use either PCIe or USB interfaces. Supported input and output ports on this type of adapter card include FireWire, RCA cable, and Separate Video (S-Video). (Find out more about these types of cards later in this chapter in the “Display Adapter Ports” section.)
30
31 Days Before Your CompTIA A+ Exams
NIC and Modem Cards The vast majority of modern computers come with an integrated NIC to allow the PC to be connected to a LAN. For most home users, the computer’s NIC is directly connected to a digital subscriber line (DSL) or cable modem device for Internet access using an Ethernet cable. If the onboard NIC fails, you can install a NIC adapter card to the PC to allow network communication. NICs usually come with two indicator lights, one to indicate whether a good network connection exists and the other to show network activity as it is occurring. This type of card has an RJ-45 port that is compatible with the connectors on Ethernet cards. Modem cards, which allow a computer to connect to the Internet using a telephone dial-up connection, are not as common as they once were. This card provides an RJ-11 port that is compatible with the connector type on ordinary telephone cables. Modem cards can also be used to allow phone calls to be placed via computer, and fax machines also use internal modems. NOTE: faces.
Both NIC and modem cards can attach to a computer using PCIe or USB inter-
Ports A port is any physical interface that allows a device to be attached, either internally or externally, to a computer. Ports can either be integrated with the computer’s motherboard or added via adapter cards.
USB Ports Today’s PCs have hot- and cold-running USB ports: internal, external, in the front, in the back, on monitors, printers, keyboards, projectors, car dashboards, practically everywhere. There are equally various USB devices: wired and wireless NICs, modems, printers, phones, audio devices, HDDs, optical burners, even LED lights, cell phone chargers, and tiny missile launchers (seriously). USB is an example of the entire computer industry agreeing to work together on a standard interface. We should count ourselves lucky because USB is fast, easy to configure, and provides its own 5-volt (V) power supply. The cables can be up to 5 meters long (almost 16.4 feet). There are four wires in a USB cable, as shown in Table 27-2. Table 27-2
USB Pinout
Pin
Color
Name
Description
1
Red
VCC
5 volts (just like in the PC)
2
White
D–
Data
3
Green
D+
Data
4
Black
GND
Ground (just like in the PC)
NOTE: The shell around the pins is electrically grounded to the case. Therefore, it should be considered 0V.
Day 27
31
The two ends of the USB cable differ from each other. Type A is the standard rectangular shape most closely associated with USB. The other end, type B, is more box-like, with two tapered corners sometimes referred to as trapezoid-like. A mini version of the USB has smaller and skinnier plugs. These mini USB cables also have an additional wire that is used to communicate to the PC what kind of device it is. Hubs allow for up to 127 devices to be controlled from 1 USB channel. To be specific, 1 USB controller actually supports 128 devices, but 1 of the devices is the controller itself. If you really must have that last 128th device, you need to install an additional USB controller. Just in case you are planning on such an endeavor, be aware that powered USB hubs plug into the wall and provide electricity to downstream devices that draw power directly from the cable. Unpowered hubs do not do this because it would cause too much draw on the tiny wires. It is the same principle about daisy chaining power strips. Too much draw through too narrow wire causes resistance, makes heat, melts wire insulation, and starts fires. Not a good day. USB 1.1 transferred data at 12 Mbps. Today’s standard 2.0 looks and acts exactly the same as its older counterpart, but it transfers data at 480 Mbps. A common A+ exam question involves a USB 2.0 device plugged into a USB 1.1 port. It recognizes the device but communicates with it at the 12-Mbps speed. Update the drivers to 2.0 if the motherboard can support it. If it still does not work, add USB 2.0 ports via a PCI card. Note that, because of backward capability, the opposite (a 1.1 device in a 2.0 port) is not a problem.
PS/2 Ports PS/2 was the de facto standard for keyboards and mice until the early 2000s, when everything finally went USB. PS/2 ports are female, with six pins arranged in a circle and surrounded by a metal ring. Often, the mouse port is green and the keyboard purple. It is easy to inadvertently switch these, which generates missing keyboard errors on power-on self-test (POST) or an unresponsive (dead) mouse. In addition to color, remember that the keyboard is more important than the mouse and is closer to the motherboard. PS/2 ports and devices are not hot swappable and require a restart after making the physical connection.
Serial Ports Serial ports are easy to spot. They are usually the only male port on the back of the PC. A morbid way to remember that the male port is serial is that most serial killers are male. Serial ports send data 1 bit at a time. They have two rows of pins in a trapezoid-shaped band. These are the classic COM ports, the legacy I/O ports. These are sometimes referred to as RS232 or DB9 ports. Like USB today, the serial port was the universal, go-to connection for everything, most commonly used for mice, keyboards, and modems. Today, serial ports are used for configuring other devices, such as routers and switches, uploading and downloading programs from microchips, and for some data-collection devices. Serial cables have a maximum length of 50 feet.
Parallel Ports IEEE 1284, the parallel port, is almost always used for old printers, scanners, and backup devices. It looks like an elongated, female serial port with 2 rows and 25 pins. Almost all parallel ports are
32
31 Days Before Your CompTIA A+ Exams
bidirectional, although some early ones were not. Printer cords have a Centronics port on the printer side. It is a trapezoid shape, but it is rather large and has wire “ears” that fold into place securing it into the printer. The mini-Centronics connection is about the same shape and size as a parallel port side, but it has blades like a SATA header. Parallel ports transmit multiple bits at a time, usually 4 or 8. Because some data transmissions are in serial format and some in parallel, Universal Asynchronous Receiver/Transmitter (UART) processing uses buffers to switch between the two.
Display Adapter Ports Video Graphics Array (VGA) ports contain three rows of five pins. They are female on the computer side and are often colored blue. VGA is the standard video port. If a customer complains of weird colors or a “tinted” monitor, check the physical connection of the VGA connector. A partially connected one causes some odd effects. Digital Video Interface (DVI) bypasses the need to convert digital video data into an analog signal for the old CRT monitors and then lets the LCD screens reconvert the analog signal back into a digital format. This is quickly gaining popularity as LCD screens become ubiquitous. DVI ports are often white and have three rows of eight pins and a larger slot on one side. It is one of the only asymmetric ports in existence. Video ports are the only ones with three rows, because there are three primary colors in light. High-Definition Multimedia Interface (HDMI) is designed to stream uncompressed digital video and audio signals from computers and game console systems to high-definition monitors and TVs. HDMI supports very high-resolution and high-quality images. S-Video uses a four-pin mini-DIN port. It is almost exactly the same size and shape as a PS/2 port, with a slightly different pin arrangement. Another difference between the PS/2 and S-Video is that the plastic rectangle that orients the plug is in a different position. S-Video plugs are typically yellow, whereas PS/2 ports are normally purple and green. S-Video sends the intensity information and the color signals on different wires. Composite video sends them together. Component video takes it a step further and separates each color onto its own cable using multiple RCA jacks. NOTE: You can learn more about S-Video at http://www.webopedia.com/index.php/TERM/S/S_Video.html.
Cables A wide variety of cables are used to connect peripheral devices to computer ports. For instance, you can use an Ethernet cable to connect the NIC port on a computer to a DSL modem device. Cables must possess the correct connectors to attach to the ports of the computer and the device and the correct internal wiring. Most of the time, when you purchase a specific type of peripheral for a computer, the correct cables come with the device. As a technician, however, you might have to replace damaged or missing cables, and you are responsible for understanding the different cable types and their appropriate use.
Day 27
33
Audio Cables The standard round jacks for line in, microphone in, and speaker out work fine for the majority of applications. However, an increasing number of people and businesses are moving to music, video, TV, and phone on PC. These applications demand a higher-quality sound output than the small underpowered speaker port can provide. Digital audio connections are not yet standardized and come in a variety of shapes and configurations. Sony Philips Digital Interface (S/PDIF) sends a digital audio signal to speakers that are designed to receive such signals. Optical audio ports allow for a fiber-optic cable to carry data to remote speakers without electromagnetic interference (EMI).
FireWire Cables Apple trademarked the name FireWire, and although the company might not like its brand name dragged into public domain use (much like Xerox, Band-Aid, and Ziploc), FireWire is the term you will see on the A+ exam. Sony and Texas Instruments (TI) also jumped on the trademark bandwagon with I.link and Lynx, respectively. Technically on a PC, the port can be called IEEE 1394a or 1394b, depending on the transfer speed, so there are actually four names for the same port. FireWire is fast becoming the primary method of connecting external storage and video devices to PCs. FireWire can stream video directly to the PC. Unlike its brother USB with 127 printers, FireWire can connect a mere 63 devices. FireWire comes in two flavors: ■
1394a four wire, 400 Mbps
■
1394b six wire, 3000+ Mbps
Both are hot swappable, have a maximum length of 4.5 meters (about 14.5 feet), and use addressing that can support a version of networking. The USB architecture is one host with many devices. FireWire can have many hosts with equal importance and a variety of devices shared among them, similar to an Ethernet environment. The FireWire plug on the PC side is rectangular, with one of the short legs bowed out to form a half octagonal shape. The other side is much smaller and shaped like an ottoman. The mini-1394 looks like a tiny HDMI connector on one end and a tiny ottoman shape on the other. They are primarily used on laptops.
Network Cables Category 5 cable is the standard network cable; however, categories ranging from 1 to 6 exist. Network cables plug into an RJ-45 jack that looks like a large phone jack with eight contacts inside. Very old networks like cable TV use cable called coaxial (also just called coax). We cover network cabling in more detail on Day 20.
SCSI Cables Small Computer System Interface (SCSI) cables connect daisy-chained drives together and must be terminated at each end, either by a terminator or a drive. These old but fast ports are found almost exclusively on servers and some high-end workstations. Like USB, it is common to find ports both internally and externally. Not surprisingly, SCSI is also rapidly being replaced by USB
34
31 Days Before Your CompTIA A+ Exams
and FireWire. Every SCSI device must be configured with a unique ID, with boot devices possessing the lowest ID in the chain and adapters having the highest ID number.
Homework Have someone who speaks “geek” quiz you on port identification. They should show you an online picture of any port and you should be able to identify the name, what it commonly connects, and pertinent info such as how many pins, what the maximum cable length is, and what the speed is.
Funwork Okay, now your gaming goliath has all the basics (motherboard, CPU, RAM, power, and cooling), so let’s deck it out with hot and cold ports. It is likely that your motherboard has integrated ports. Great! No need to duplicate those. You also want to have dual or plural monitors to make the PC a respectable gaming system. The one in my classroom has six monitors. That is going to take some planning ahead and space considerations. How does your PC connect to your network? Please tell me it is not a slow, laggy wireless link. Portability and gaming are usually mutually exclusive. If you are not planning to move it, cable it. Even 802.11N pales in comparison to 1000BASE-T Cat6 Ethernet. Could it be fiber to the desktop? Check out the availability in your area for that. Remember it is a dream PC. Fiber is going to require a special PCIe card. Some very exotic keyboards exist. Some fold out from personal digital assistants (PDA). Another shines onto any tabletop surface and senses when your fingers hit the squares. With some touchscreen keyboards, the letters and symbols can change depending on the language, or game, or specialized input scenario. Some flexible keyboards can even be rolled up and are essentially unbreakable. No small amount of creativity has gone into designing the keyboard.
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapter 1
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 3 and 8
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapter 1
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapter 9
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 8, 18, and 19
■
Back To Basics: Identify Your Computer Ports at http://linuxologist.com/1general/back-tobasics-identify-your-computer-ports/
■
Computer Cables at http://www.whatdoesthatlooklike.com/cables.shtml
Day 26 Operating Systems Comparisons and User Interfaces A+ 220-701 Exam Objective Objective 3.1: Compare and contrast the different Windows Operating Systems and their features
Key Points The operating system (OS) is the lifeblood of the computer. It is also the way we communicate with an otherwise inanimate box of electronics. Microsoft Windows 7 is the focus of the most recent version of the A+ exam. Apple and Linux operating systems make up most of the small remaining market, and they compete by specialization. Linux is very stable, small, and perfect for servers. Mac OS X is a user-friendly OS that has a small but very loyal fan base.
Operating Systems and the Layered PC Model It is important to see where the OS fits into the bigger picture. The layered PC model shown in Figure 26.1 maps the interactions among the devices and ultimately the user. Figure 26-1
Layered PC Model User
Applications Internet Explorer, Firefox, Safari, MS Office, OpenOffice, Outlook, Entourage, Anti-virus, iTunes, and so on
Operating System (Only One of the Following) Windows 9x, NT, XP, Vista 7, a Linux Distribution, Mac OS 9, Mac OSX
Drivers Printer Drivers, Video Drivers, NIC Drivers, Audio Drivers…
BIOS SATA and PATA Designations, Enabling Integrated Devices, Boot Sequence…
Hardware Expansion Cards, Hard Drives, Optical Drives, Ports, Printers, Video Cameras, Speakers…
36
31 Days Before Your CompTIA A+ Exams
Follow the model as the user surfs the web. The user uses the OS to navigate to the icon to launch Internet Explorer (IE). The application uses several subsystems in the OS to call on the network interface card (NIC), which is at the hardware layer. But the OS does not understand how to talk to the NIC without the driver. The NIC then begins to send signals based on the driver’s instructions. The driver was told what to do by the OS that was told what to do by the application that was controlled by the user. A less-micromanaged way to look at this is each layer provides services to the layers above it. Use this model in troubleshooting. For example, if a printer will not print, check the hardware first: paper, ink, online, cable. Then move up to the BIOS and driver layer. Is the USB port enabled in the BIOS? Do the USB drivers work in the Control Panel? When these are yes, yes, and yes, look at the OS. Does the OS know that there is a printer installed in the Printer part of the Control Panel? If yes, the application might have some issue with the printer, such as the margin settings or fonts. Otherwise, the issue could simply be an operator error. Chances are that along the way you can find and solve the problem.
Desktop Operating Systems Nothing in the computer world is more contentious than the Mac versus PC debate. Linux is not in the public eye, but it, too, is a major player. As a computer technician, you need to understand this debate so that you can correctly advise customers. Their choice of an OS should be determined by their needs—not by clever TV commercials, not by your familiarity with a particular OS, and certainly not “because you said so.”
Apple OS X Apple carefully chooses hardware to avoid any compatibility issues within its computers. Then it designs an OS to make the most efficient use of that hardware. As a result, Apple seldom, if ever, has any hardware- or software-compatibility issues. Further, it can tweak the software to maximize performance. The disadvantage with this strict relationship between the hardware and software is limited upgrade potential. Users tend to “outgrow” a Macintosh because they cannot upgrade it very much. Because of this high turnover rate, Apple pays close attention to the user experience, the look, and image of their products and therefore fosters an almost cult-like following.
Microsoft Windows Microsoft makes operating systems that need to support an endless supply of new and old devices and countless third-party applications. This leads to significant compatibility issues. However, it also allows for almost unlimited upgrading. It is not uncommon to find a 4- or 5-year-old PC that has a new burner, larger HDD, more RAM, different monitor, and even a newer Microsoft operating system than when it was sold. Another Microsoft attribute is its market dominance. Nearly 90% of all PCs run a Microsoft OS. Windows is a robust OS that works hard to accommodate conflicting and disparate uses of a PC. It is the ultimate compromise, like making a car that can handle off-road conditions, haul a tractor trailer load, seat eight people, have surround sound, but still fit nicely in a normal garage, parallel park easily, and of course, get 130 miles per gallon. Most criticism of Microsoft, considering their daunting task, is unwarranted.
Day 26
37
The A+ exam likes to ask about upgrading from one Windows OS to another. Within certain limits, any Microsoft OS can upgrade to any other, except 9x cannot be upgraded to NT. Windows 7 Home and Starter editions cannot upgrade to Professional, Ultimate, or Enterprise editions. You would need to reformat the repartition as NTFS and perform a clean install to go that route. Downgrading is tricky and raises the question, “Why?” There are very few valid reasons to downgrade from a later Windows OS to an earlier one. One primary reason is that a license for the desired earlier OS is not available and your only option is to buy the later OS and license and then downgrade to the earlier one. Although it is almost always preferable to run the latest version of Windows, you might need to use an earlier version to run a legacy peripheral not supported on subsequent Windows versions. The best way to downgrade a Windows OS from a newer version to an older version is to perform a clean install to use an earlier version of an OS. In general, a clean install is almost always preferable to an upgrade. Ask any hacker about the windows.old folder.
Linux Linux is only for the geek at heart. It is the skinniest, most efficient OS. Linux is unique because it is open source. That means that anyone can modify it and it is owned by no one. We don’t pay for Linux itself, but for the effort put into new research, development, and compatibility with new hardware. Companies such as Red Hat, SuSE, Caldera, and Ubuntu sell Linux in this manner. They provide technical support and updates. NOTE: Only Windows operating systems are included in Objective 3.1, and it is unlikely that you will be tested on your knowledge of Linux or Apple operating systems. This information is included as a matter of technical interest; also, in real life, you will need to support multiple operating system types and versions.
Many Linux aficionados download a free copy of Linux—called a distro (short for distribution)— such as Slackware or FreeBSD, CentOS Fedora Core, or BackTrack, and then customize it to their needs. This type of customization is not for the computer novice and certainly not for the end user, but performing this sort of task is probably somewhere in your near future. One major problem with Linux is its insistence of using the terminal—the command-line interface (CLI)—to make any system changes. End users often have allergic reactions to anything CLI. Linux hardware support is challenging even to experienced Linux people, but it has become better in recent years. Dell ships laptops and netbooks with preinstalled Ubuntu, a cost-saving, user-friendly distro of Linux. There are literally hundreds of Linux operating system distributions. Although Linux is not well known by mainstream PC users, it is widely used in mobile and embedded devices such as Android, BlackBerryOS, and PalmOS. You will not be tested on this information for the A+ exam, but it is a good career move to become familiar with the various computing devices that use Linux. Apple iOS is based on UNIX, an ancestor of both the Apple and Linux OS platforms. NOTE: Droid is a model of cell phone by HTC. Technically, the term Droid belongs to LucasFilms LTD. Android is an OS made by Google designed to support smartphones and portable devices. (By the way, if you do not speak Star Wars, you’re not allowed to wear the proud and honorable label of computer geek.)
38
31 Days Before Your CompTIA A+ Exams
NOTE: iOS and IOS are two very different things. Both are operating systems. iOS is Apple’s OS for iPhones, iPods, iPads, and other portable devices. It is focused on user experience. IOS is Cisco’s command-line OS for routers and switches focused on network traffic.
The A+ exam focuses on fundamental OS concepts and absolutely loves Windows 7. Most of this book is focused on that OS. The following is what you should know about Linux for the A+ exam: ■
HDD partitions are usually formatted in EXT2, 3, and 4.
■
usr/ contains the kernel and executable binary files with a .bin extension.
■
var/ holds error logs and spoolers for email and printing.
■
tmp/ contains temporary files created by applications.
■
boot/ has boot loader configs and kernel images.
■
home/ is where home directories are stored.
■
Use ifconfig instead of ipconfig to display details about your NIC and IP address.
■
Changes made to the NIC in the CLI are good only for that session. To make permanent changes, edit the text-based config files, or in user-friendly versions there is often a graphical user interface (GUI) program that edits those files for you.
■
In the CLI, sudo (or su) means, “super user” and is the same basic idea as temporarily running something as administrator in Windows.
■
ls stands for list and is similar to dir in the Windows CLI to show the contents of a directory.
■
User access rights, file ownership, and group ownership for files and folders are spelled out in the terminal prompt by using the command ls -l [file or folder name]
■
chmod modifies access rights.
■
chown changes file ownership.
■
chgrp changes the group ownership of a file.
OS System Requirements Table 26-1 compares the system requirements of the major OS players. Remember these are the absolutely bare-minimum requirements found on both the Microsoft site and the A+ exam. The CPU, RAM, and HDD numbers need to be at least doubled to achieve any kind of acceptable performance. You should probably commit this table to memory.
Day 26
Table 26-1
39
OS System Requirements
Operating System
CPU
RAM
Hard Drive Video
Other
Microsoft Windows 2000
133 MHz
64 MB
2 GB
VGA
N/A
Microsoft Windows XP
233 MHz
64 MB
1.5 GB
SVGA
N/A
Microsoft Vista
1 GHz
1 GB
40 GB
WDDM Driver1
DVD-ROM 128-MB graphics RAM Internet connection
Microsoft Windows 7
1 GHz
1 GB
x86 16 GB
DirectX 9 with WDDM 1.0
Internet connection2
Only proprietary video card
DVD-ROM
X64 20 GB Mac OS X
867 MHz
512 MB 9 GB
Internet connection2 Linux Red Hat 9
400 MHz
192 MB 5 GB
Practically any video card
DVD-ROM Internet connection2
Ubuntu
1 GHz
1 GB
15 GB
Graphics card USB or optical that supports 1024 drive by 768 resolution
1 The Windows Display Driver Model (WDDM) gives the OS much more control of the video content. 2 The Internet connection is used for verification of authenticity and for providing support and updates.
Network Operating Systems A network operating system (NOS) acts as a server and provides services, data, files, application, access, authentication, and so on to other PCs on a network. Even “desktop” operating systems can provide network services such as sharing files or a printer. A true NOS is designed to maximize those kinds of services instead of supporting local applications like Word, PowerPoint, and so on. NOSs have applications such as email servers, web servers, authentication, printing, and naming services. All these are dedicated resources to other network devices. Popular NOSs are Linux Server, OS X Server, the many Windows Servers, and Novell. Linux traditionally makes up a large portion of server-side operating systems.
40
31 Days Before Your CompTIA A+ Exams
The “Multi” Terms Table 26-2 compares and contrasts the five multi-somethings you will likely see on the A+ exam. Table 26-2
The “Multi” Terms
“Multi”
Description
Multiuser
Many users log on to one OS. Users use local or remote logons. Accounts are managed and permissions assigned to each.
Multitasking
The operating system can handle more than one application at a time (which would be all the operating systems on the A+ exam).
Multiprocessing
A computer doing more than one task simultaneously. In reality, it cannot, but it gives the appearance that it can.
Multithreading
A technique that allows multiprocessing to take place. It actually buffers threads (tasks for the CPU to do) and manages the input by alternating the threads to give the appearance of multiprocessing.
Multicore
Is not an OS concept but is a “multi” term. Many CPUs on a single physical chip. This actually allows for true multiprocessing. Still, at some point (the front-side bus, the display, cache, someplace), multiple threads need to stop and take turns.
GUI Versus CLI A GUI is easy to use but requires considerable system resources, including RAM, video, sound, and HDD space. A GUI keeps inexperienced end users out of the inner workings of the OS. The CLI also gives the user the ability to configure the computer, often with more options, but requires specialized knowledge in the available commands and their options. A skill set related to using the CLI is the ability to create script files. You can automate tasks by creating a file in Notepad or some other text editor and saving it with an extension of .bat or .com. The file would contain a list of the commands that you otherwise would have to enter manually at the command prompt. When the script runs, it executes those commands in the order in which they are listed. If you are a true computer geek, you do not fear the CLI or scripting. Instead, you embrace it and love its simplicity, brevity, and beauty.
Command-Line Syntax Our world speaks CLI. If you want to run with us, learn to love CLI. All command-line statements follow the same basic syntax: (grammar): command (space) argument, switch. In other words, verb, object, modifier. For example: I (subject) ate (verb) lunch (object) at work (modifier). Tables 26-3 through 26-6 show various command-line syntax examples. Table 26-3 shows command-line syntax in its most basic form.
Day 26
Table 26-3
41
Command-Line Syntax
Command
Argument
/Switch
Do this
To this
Like this
Let’s take apart some commands. Table 26-4 breaks down the command FORMAT C: /S and then explains what it means. Table 26-4
Syntax Example: FORMAT C:/S
Command (Space)
Argument
(Space) /Switch
FORMAT
C:
/S
Make ready to receive data…
The primary HDD…
And put system files on it to make it bootable
Table 26-5 breaks down the DIR /P command and then explains what it means. Table 26-5
Syntax Example: DIR /P
Command (Space)
Argument
(Space) /Switch
DIR
(Nothing here means “do it right here.”)
/P
Show…
The contents of this directory…
Per page
Table 26-6 breaks down COPY Table 26-6
A: C:\New Folder.
Syntax Example: COPY A: C:\New Folder
Command (Space)
Argument
COPY
A: C:\New Folder
Copy…
Everything on the floppy disk to the New Folder on the HDD. Notice the space between the two arguments. Notice also the backslash is used to notate “down a level.”
(Space) /Switch
(Nothing here means that nothing is modified.)
Command Prompt Commands There are hundreds of command prompt commands. Fortunately, you need only some to get by in most CLIs. Like a foreign language, the more time you spend immersed in it, the more proficient you become. In the Windows CLI, the command prompt has a built-in translation guide, a command aptly named HELP. Table 26-7 shows common command prompt commands.
42
31 Days Before Your CompTIA A+ Exams
Table 26-7
Command Prompt Commands
Command
Explanation (In Order of Importance on the A+ Exam)
HELP
Truly one of the most useful commands in the CLI. Type HELP and then the command; the syntax and list of switches appears.
/?
To get CLI help in Vista, type the command first and then use a ? switch (for example, EDIT /?).
CD
Changes the directory (also called folder). CD\ Moves to the top of the directory tree. CD DirectoryName moves to that directory.
CD..
Moves one level up the directory tree.
ATTRIB
Changes file attributes. + adds an attribute and - removes it. A = archive; R = read only; S = system; H = hidden. ATTRIB -R +A -S -H IMPORTANT.DOC flags this document to be backed up.
DIR
Displays the contents of a directory (folder). To show the hidden files in the CLI, use DIR /AH. A = all and H = hidden.
MD or MKDIR
Makes a new directory.
RD or RMDIR
Removes a directory. This cannot be used to delete files. In fact, the target directory must be empty before this command will work.
COPY
Copies files to a new location.
XCOPY
Copies directories and all the subdirectories to a new location.
*
Wildcard is anything, any length.
?
Wildcard is anything, just one character.
Using wildcards
DEL *.mp3 deletes all MP3s. DEL lost*.mp3 deletes any MP3 that begins with the characters lost. DEL lost??.mp3 deletes any song that begins with lost and ends in two characters. DEL *.* deletes all files in the current directory. You are prompted at the command line to make sure you want to do this. Type Y for yes or N for no.
DEL
DEL UNIMPORTANT.DOC deletes this file. (Note that DEL cannot be used to delete directories. Use RD to remove a directory.)
RENAME
Renames a file. Be sure to include the filename and the extension when doing this.
CLS
Clears the screen.
EDIT
Edits a file with a rudimentary word processor.
PRINT
PRINT LETTER.DOC prints whatever the argument file is. Most modern printers do not support this.
Day 26
Command
Explanation (In Order of Importance on the A+ Exam)
TYPE
Displays the contents of a file. This command almost always uses an additional piece, |MORE. The | symbol is called a pipe. For example:
43
TYPE FILE.TXT |MORE. >
Redirects the output to a file. This is used to create reports and logs. This is also used in lieu of a printer.
Users and Permissions All modern operating systems allow for multiple users to log in and use the PC, each with a different level of permission. Limiting end-user privileges is not necessarily a bad idea. In an NTFS, EXT2, and EXT3 partition, any given user can be assigned any of the following permissions to any given folder: ■
Full Control
■
Modify Contents
■
Read & Execute
■
List Folder Contents
■
Read
■
Write
Windows administrator is essentially the same as Linux and Mac OS X root. In XP and Mac OS X, users can run a program from a restricted user account if they provide the correct login credentials as the administrator when prompted. In Linux, this is called sudo (super user, do…). This technique greatly simplifies the logistics of logging out as a restricted user, logging in as an administrator, making the change, logging out as administrator, and then logging back in as a restricted user to verify the change.
Homework ■
Review CLI commands and syntax and explore them on your PC. (Remember the HELP command.)
■
Review the different versions of the Windows OS and their minimum installation requirements.
Funwork Write a script that automatically copies your Documents folder to a USB or network drive. This might prove more useful than you realize. It is not uncommon for administrators to write short
44
31 Days Before Your CompTIA A+ Exams
scripts to automate tedious or mundane tasks. For help, go to http://technet.microsoft.com/ en-us/scriptcenter/dd940112 or search for “Scripting your first steps.” If you haven’t yet found a newbie friendly forum, try computerhaven.info. They are dedicated, helpful, and considerate IT professionals who remember what it was like to be new to the computer world.
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 5 and 12
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 13, 14, and 15
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapters 11 and 12
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 12 through 16
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 14 through 17
Day 25 Operating System Installation and Booting A+ 220-701 Exam Objectives Objective 3.2: Given a scenario, demonstrate proper use of user interfaces Objective 3.3: Explain the process and steps to install and configure the Windows OS Objective 3.4: Explain the basics of boot sequences, methods and startup utilities
The Windows User Interface Windows provides various methods of accessing information, navigating the computer’s directory structure, configuring hardware, and gathering information. The three interfaces accessed by users are: ■
The graphical user interface (GUI)
■
The command-line interface (CLI)
■
The Run-line utilities
As a PC technician, you need to learn your way around all of them.
GUI Utilities The GUI is the interface most familiar to computer users. Usually, on a Windows computer, the user starts by clicking the Start button and then navigating to the desired location or utility. These features vary, depending on the version of Windows being used, so we take a brief tour of the most common interfaces.
Windows 7 Libraries Libraries are new with Windows 7, and although they look like the usual folders you expect when using Windows Explorer, there is more to them than meets the eye. When you open a folder in Windows, you usually expect the items displayed inside to actually be stored in the folder. For instance, the documents in the My Documents folder are actually stored in that folder. However, when you click the Start button on a Windows 7 computer, and then click Computer, you see four libraries in the pane on the left: Documents, Music, Pictures, and Videos. Surprise! These containers are actually “virtual.” Libraries are actually organizers that display various files in a single interface, regardless of where they are actually stored on the computer. For instance, you might want to use the Documents library to “contain” not only files and folders from the My Documents folder, but from other directories on your computer and from other computers on the local network. All you have to do is open the library, click Locations under the library
46
31 Days Before Your CompTIA A+ Exams
name, and add a location. Once added, the files stored in that location are available in the library. No more copying and pasting files to and from different directories.
My Computer In Windows 7, this is called Computer, but it works pretty much the same way. Opening Computer or My Computer displays the attached storage devices in the main pane while offering navigational links in the pane on the left. Storage devices can include internal hard disk drives (HDD), optical drives such as CD and DVD players, and externally attached drives. Different partitions on the same physical drive are shown as separate drives (C:, D:, E:, and so forth). System Tasks, Other Places (My Network Places, My Documents, and so on), and Details are found in the left pane on a typical Windows XP computer. For Windows 7, Computer shows, in addition to the storage devices, Favorites, Libraries, Homegroup, Computer, and Network in the left pane. Here are the details for those places: ■
Favorites includes locations most frequently visited, such as Desktop, Downloads, and Recent places.
■
Libraries includes the default libraries previously discussed plus any custom libraries you’ve added.
■
Homegroup is the representation of the local network, either in a home or small office setting.
■
Computer has previously been described.
■
Network provides a list of computers, media devices, and network devices that make up the computer’s network. This differs from Homegroup in that it includes devices and locations that do not have to exist on the local home or small business network.
Control Panel All Windows computers going back to Windows 98 and before have a Control Panel that lets you access the major configuration features for the operating system, such as Device Manager, Keyboard settings, and Sound settings. Windows XP introduced two different views of the Control Panel, the familiar Classic view, which displays different features as applets (this was the only view available in versions of Windows before XP), and Category view, which organizes information by type and function. Windows 7 offers Category view and the options to view Control Panel applets as Large or Small icons. Most technicians prefer an applet or icon view, but users tend to like Category view because it seems more intuitive. Using the Classic icon view, select and open the desired applet and then navigate to the desired interface you want to access and use. Remember, the options available across different versions of Windows are similar but not the same, so expect different features to be available in a Windows XP Control Panel and a Windows 7 Control Panel, for example.
Command-Line Utilities In the CLI, you can navigate the directory system and issue configuration commands; you can also run different tools or utilities. Several utilities are dedicated to providing networking information.
Day 25
47
Ping This is the most common network utility used by computer technicians, and it tests basic connectivity between the computer and a remote host. Open a command-line window and at the prompt type ping followed by either the hostname or IP address of the host you want to reach. An example of using ping with a hostname is ping www.google.com. An example of using ping with an IP address is ping 74.125.127.147. When you press Enter, by default, ping returns four replies, assuming you have a connection. This represents four “packets,” which are containers of network information. A small report is displayed as to how many packets were sent, how many were received, and how many were lost. To see a list of command-line switches available for ping, enter ping /? at the command prompt.
Telnet Telnet stands for “terminal emulation” and is a network utility that enables you to connect to a remote server, log in, and then execute commands on the server. To initiate a Telnet session on a remote host, you must either have the host’s name or IP address. The correct syntax is telnet \\remotehost. Once you initiate the session, you are prompted for a valid username and password. Without the proper credentials, you cannot successfully log in to the host for your Telnet session. At the command prompt, if you type telnet with no hostname, IP address, or other parameter, you open a Telnet session. You can then specify the host or issue other valid Telnet commands: ■
q: Using this command at the Telnet prompt ends your session and returns you to the normal command prompt.
■
open \\hostname port: Using this command syntax at the Telnet prompt establishes a Telnet connection with the remote host over the port you specify. For instance, you could establish a connection with a web server using port 80, which is the port used by the HTTP protocol.
■
close \\hostname: Using this command at the Telnet prompt closes the session with the specified host but leaves the Telnet prompt present. You can then open a Telnet session with another host if desired.
At the Telnet prompt, to get help, including a list of valid commands, enter ?.
Ipconfig Entering ipconfig at the command prompt results in IP configuration data for the computer being displayed. For instance, information for the computer’s network interface card (NIC) or Ethernet adapter shown by default includes the Domain Name System (DNS) suffix used, IP address, subnet mask, and the IP address of the default gateway the computer accesses to send and receive traffic out of the local network. This command yields similar information for any other network interfaces attached to the computer, including wireless network adapters. Several common parameters are used with the ipconfig command to render additional information or perform configuration tasks: ■
/all: Provides a more detailed list of configuration data for the computer’s network interfaces, including the physical address of network interfaces, lease information about the computer’s
48
31 Days Before Your CompTIA A+ Exams
currently assigned IP address, if issued via Dynamic Host Configuration Protocol (DHCP), and the IP addresses of the relevant DHCP and DNS servers, if available. ■
/release: Using this parameter with the ipconfig command results in a dynamically assigned IP address for the computer to be released or unassigned. This renders the computer without an IP address and thus any ability to communicate on the network. Note that this command is not effective if the computer’s IP address is assigned manually.
■
/renew: Using this parameter with the ipconfig command sends a request to the DHCP server asking that an IP address be dynamically assigned to the PC. Note that this command is ineffective if the computer’s IP address is assigned manually or if no DHCP server is available.
■
/?: You can use this command parameter to get help information about the ipconfig command, including a list of valid parameters.
Run-Line Utilities These are utilities that are opened by typing their names in the Run box (for Windows computers up to Windows XP) or the Search box (for Windows Vista and Windows 7 computers). The most commonly used Run-line tools are presented as follows.
MSConfig MSConfig is a Run-line tool that lets you disable one or more programs that automatically load at startup so that you can perform diagnostic and repair tasks on a computer. As previously mentioned, depending on the version of Windows you are using, type msconfig in either the Run or Search boxes and then press Enter to open the utility. The System Configuration utility opens and presents several different tabs, depending on the version of Windows. For instance, on Windows XP, available tabs are as follows: ■
General: Allows you to select the type of startup, such as normal, diagnostic, and selective.
■
SYSTEM.INI: Allows you to enable or disable selective drivers.
■
WIN.INI: Allows you to enable or disable boot time settings, although this file type exists to provide backward compatibility to older 16-bit applications if necessary.
■
BOOT.INI: Allows you to edit the boot.ini file, check boot paths, and select specific boot options.
■
Services: Allows you to enable or disable a wide variety of services, including Windows Audio, Index Service, and Network Connections.
■
Startup: Allows you to enable or disable specific services that are loaded when the computer starts.
■
Tools: Allows you to review and launch specific utilities in Windows, such as the Command Prompt, Event Viewer, and Security Center.
Day 25
49
For Windows 7, the available tabs are: ■
General
■
Boot
■
Services
■
Startup
■
Tools
The function of the features under these tabs is pretty much the same as those described for Windows XP.
MSInfo32 Running MSInfo32 opens the System Information box, which displays a detailed list of information about the computer’s hardware and software environment. Categories are displayed in the left pane, and selecting any category or subcategory displays the details in the main pane. For example, expanding Hardware Resources and selecting Conflicts/Sharing displays a list of I/O and interrupt request (IRQ) resources and the devices using these resources. If any resource conflicts exist (an extreme rarity in modern computers), that information shows, too. The System Information box also lets you search the contents, and you can refine the search by selected categories or by category name.
Dxdiag Dxdiag is a diagnostic tool designed to test and correct Microsoft DirectX issues. For Windows 2000 and Windows XP, the utility tests and troubleshoots DirectX video and sound-related hardware issues. In Windows Vista and Windows 7, Dxdiag performs no tests and only displays information on system, display, sound, and input issues. The tool reports any problems but cannot fix them. For any 64-bit version of Windows, two versions of Dxdiag exist: a native 64-bit utility and a 32bit version of the tool. NOTE: DirectX is a group of application programming interfaces (API) that manage tasks related to multimedia and game programming on Windows computer platforms. DirectX is used in display and sound for Windows computers and Microsoft Xbox and has been included with Windows since Windows 95 OEM SP2.
Regedit Running Regedit in a Run or Search box opens the Registry Editor for a Windows computer. The Registry is the database that stores all the hardware and software configuration settings for the computer, which are structured as keys and values. CAUTION: Do not edit any of the Registry settings in the editor unless you know exactly what you are doing. Making a mistake with the Registry could result in a computer that will not boot or will make the operating system unstable and next to impossible to repair. Use the Regedit utility only when all other options are not available.
50
31 Days Before Your CompTIA A+ Exams
Like most interfaces in Windows, the organizational structure of the Registry is displayed in the pane on the left. Click and expand the various folders in the structure to arrive at the desired key or subkey. Clicking any folder in the navigation pane displays the contents in the main pane. Although the Registry Editor is used to directly edit the computer’s Registry settings, it is far more common for users and technicians to indirectly edit the computer’s configuration using tools in Control Panel.
Operating System Installation OS installation and booting are tricky subjects. If the A+ exam asks you where the OS is located, they probably want the primary partition on the HDD as the answer. Anyone in IT knows full well that the real answer to that question is, well, anywhere: flash drive, live CD, image, ghost, recovery CD, network boot, or virtualization. If you’re already an accomplished computer geek filling in your resume with some certifications, do not read too much into the questions.
Hardware Compatibility List Microsoft has a process by which manufacturers send their hardware to be evaluated and tested. If Microsoft finds the product to be compatible with one (or all) of its operating systems, it is “certified” and listed on the online hardware compatibility list (HCL). The HCL is an important resource if you’re making large purchases. If you plan to buy 400 new HDDs to upgrade your network, for example, it is in your best interest to first verify that they will work with your OS. A similar process is used for applications, drivers, peripherals, and adapter cards.
Preparing the HDD for an OS Installation Before installing the OS, you need to prepare the HDD. It must be partitioned into at least one logical drive. That partition needs to be formatted. Then you’re ready to install the OS on a clean slate.
Partitioning When an HDD is new or when you are performing a “clean” OS install, you must partition the HDD. Applications that enable you to do so include Fdisk, Partition Magic, or most likely the native software in the OS installer package. Note that the Disk Manager in Administrator Tools in the Control Panel is generally the place where you make partition changes after the OS has been installed. In older versions of Windows, you cannot resize originally created partitions. Windows Vista and Windows 7, however, support that with some limitations, eliminating the need in some cases for a third-party partitioning program. There are two kinds of partitions: ■
Primary: In Windows-based PCs, the primary partition contains the boot files and needs to be active in order to boot. This is what we refer to as the C: drive.
■
Extended: Extended partitions can be divided further into logical drives, D:, E:, and so on.
Day 25
51
Essentially, a partition is a fence that marks where data will be written or “planted.” Like a piece of property, you can map many logical partitions (up to 23) on a single HDD. Likewise, a partition can extend across multiple physical drives. The C: name is actually the logical drive on the primary partition, not the actual entire HDD.
Formatting If the partition is the fence, formatting is plowing in preparation to write or “plant” the OS. Formatting sets up the File Allocation Table (FAT). The FAT is a map of the HDD that the OS uses to locate and retrieve stored data. There are dozens of kinds of FATs. Fortunately, the A+ exam focuses on only a few. FAT32 is used in Windows 98/Me and it is an option in XP, Vista, and Windows 7. NTFS is the standard used in XP/Vista/Windows 7. The only time FAT32 is preferred in XP/Vista/Windows 7 is if you need to provide network file sharing (NFS) for 98/Me PCs or to view FAT32 partitions. Upgrading from FAT32 to NTFS is fine. Converting back is not really possible. By most measures, NTFS is superior to FAT32 and should be used if given the option. Among the advantages of NTFS are security, sharing, disk quotas, and compression. Note that low-level formatting (LLF) is not at all the same as formatting. HDD manufacturers have programs for download that enable you to wipe the HDD clean. LLF erases all partitions, data, everything. It is even difficult for forensics programs to reconstruct the data once an LLF has taken place.
Windows Boot Process An unbootable PC that says “Missing Operating System” or “Missing NTLDR” means the BIOS cannot find the boot files and it is time to check the boot sequence in the BIOS. The boot process does not stop there. Here are the steps in order. Be sure you learn this process for the A+ exam. NOTE: The boot process presented here is specific to Windows XP. This process is slightly different for different versions of Windows, so make sure you learn the steps each Windows version uses to boot.
1. POST (power-on self test). 2. BIOS reads MBR (master boot record). 3. MBR takes control and loads NTLDR (New Technology Loader). 4. NTLDR reads BOOT.INI to know which OS and which partition to boot. (This has changed in Vista and 7. BOOT.INI is used only when dual booting older versions and newer versions.) 5. NTLDR uses NTDETECT to detect and install hardware. 6. NTLDR loads NTOSKRNL.EXE and HAL.DLL. 7. NTLDR reads the Registry and loads device drivers. 8. NTOSKRNL.EXE loads WINLOGON.EXE.
52
31 Days Before Your CompTIA A+ Exams
Clean Operating System Install Every techie has memorized the process of installing Windows (after installing it over and over). It is likely going to be one of your first tasks to prove your worth in a shop. They will hand you a PC and an OS and say, “Install this.” Failure is not an option. Your reputation is on the line. First, check the inside of the PC to make sure everything is connected properly, make sure it POSTs, and then follow these steps: 1. Set the boot sequence in BIOS to boot to CD. 2. Boot to the OS CD or DVD. 3. Create a partition. Let the OS create its suggested partitions. 4. Format NTFS (or FAT when 9x systems). Use Linux’s and Mac OS X’s recommended formatting. 5. Install the OS. 6. Install drivers (Device Manager). 7. Update the OS. 8. Update drivers. 9. Install printers and other devices. 10. Deal with any driver issues. 11. Update all drivers. 12. Install applications (Office, for example). (Include normal plug-ins for browsers such as Java, Flash, Adobe Acrobat, and so on.) 13. Update applications. 14. Defrag. 15. Install antivirus (AV) spyware-removal software and other utilities. 16. Create a restore point.
Boot Modes Protected mode lets the OS manage RAM and virtual RAM and choose where to put the programs to avoid one program from writing over another in RAM. Virtual real mode lets the application (even ones written for real-mode access) work in a virtual environment (a virtual copy of the RAM and other hardware that fools the application into thinking it has real control of the computer). It asks the virtual hardware to do something. The OS analyzes the request. If the request is deemed not dangerous, the OS allows it to happen. Otherwise, the OS crashes that session, not the entire machine. When that occurs, you can use Ctrl+Alt+Del to open Task Manager and see that a program is “not responding.” Only that program does not work. Chances are good the rest of the PC is fine and will recover.
Day 25
53
Compatibility mode builds on virtual real mode, and the CPU queries the application to determine for which OS it is designed. Then a virtual machine creates and supports the application as if it were on another OS.
Logical Memory The first megabyte of memory or RAM is divided into sections: Conventional (0 KB to 640 KB), Upper (640 KB to 1 MB), and Extended (anything above 1 MB). NOTE: This is ancient thinking about RAM. Every OS handles memory differently and probably not like this. Still, it might be on the A+ exam, so know this stuff.
Windows Boot Options Sometimes computers experience problems, ranging from minor annoyances to near-catastrophic failures. However, you have a number of boot options available to diagnose and repair the problem, at least most of the time.
Safe Mode This is a boot method that allows Windows to boot to a minimal GUI interface. Only basic drivers are loaded in this process, and booting into Safe mode can let you diagnose a problem with a corrupt device driver or malware that cannot be detected and removed by the computer’s AV program. Booting into Safe mode can be a little tricky. When you power up the computer, you must repeatedly tap the F8 key until the Windows Advanced Options menu appears. Some techs recommend pressing and holding F8, but on some computers, this only results in an error message because the BIOS thinks the key is “stuck.” There are a number of different options available in the Safe Mode utility; the Safe Mode option is most typically used. You can choose Safe Mode with Networking if you want the network device drivers to be loaded. This is helpful if you need to access files on the local network or download a fix from Microsoft, for example. The Enable Boot Logging option creates the ntbtlog.txt file saved in the root system folder, which lets you review a list of components and drivers loaded and not loaded when booting into Safe mode. The Last Known Good Configuration option, when selected, lets the computer boot into the state it was in when everything worked correctly. It is not magic, however. This option just restores a group of Registry keys containing the settings for various drivers and services when they last worked correctly.
Boot to a Restore Point This is not so much a boot option as it is a wizard for selecting a state the computer was in at some previous date, usually before a system change such as installing a new piece of hardware and drivers or the installation of a Windows hotfix.
54
31 Days Before Your CompTIA A+ Exams
For Windows XP through Windows 7, you can launch System Restore by opening the Accessories folder under Programs or All Programs, opening System Tools, and selecting System Restore. For Windows XP, select the first radio button, which is Restore My Computer to an Earlier Time, and then click Next. For Windows Vista and Windows 7, select either Recommend Restore or Choose a Different Restore Point and then click Next. Afterward, follow the instructions in the wizard and when prompted reboot the computer. It will boot to the state in which it existed on the selected date, which many times will resolve whatever problem the last change to the computer caused.
Recovery Options These are a series of different utilities and options that enable you to attempt to troubleshoot, back up, and restore an ailing Windows system.
Automated System Recovery Automated System Recovery (ASR) is a two-part, backup and recovery system that needs to be configured before a problem happens. When a fault occurs in Windows, it is too late to consider this option. In Windows XP, like System Restore, you’ll also find the ASR backup feature located in the System Tools folder under All Programs (or Programs) > Accessories. For Windows Vista and Windows 7, you must go to the Control Panel, click Backup and Restore (in large or small icons view), and then click Set up backup. In Windows XP, once you launch the Backup program, you are taken through a wizard, prompted to select the files and services to back up, and then choose a location (floppy disk drive or external USB drive) you want to be the target of the backup. The selected files and services are backed up in a file with a .sif extension. To restore, you go to the System Tools folder, select Restore Files, and follow the wizard to navigate to the location where the backup files are stored and then perform the restore procedure. For Windows Vista and Windows 7, you use the Backup and Restore utility to create a system repair disc (floppy, USB, or optical disc). You go to the same location to launch the recovery operation. Of course, for any restore procedure, regardless of the version of Windows you are using, you need the recovery disk to make it work.
Emergency Repair Disk The emergency repair disk (ERD) option is available only in Windows 2000. For Windows XP and later, the ASR option is used to create a recovery disk. For Windows 2000, in the Accessories folder, point to System Tools and then click Backup. On the Tools menu, select Create an Emergency Repair Disk. The process is similar to how a repair disk is created in Windows XP. ERD is also used to inspect and repair Windows startup, to locate and replace missing system files, and to inspect and repair a damaged or corrupted boot sector. When you perform these functions, you are prompted for the ERD you created. If the disk is not available, press the L key and Windows will try to find the Windows 2000 installation files and use them to perform the repairs. The files might be located in the root system folder under System32\Config\Software, or you can use the original Windows 2000 installation disk if available.
Day 25
55
Recovery Console This is an option available only in Windows 2000 and Windows XP and is the “when all else fails” option for recovering Windows. If the Recovery Console does not work, your computer is hosed and your only option is to do a fresh install of the OS, obliterating your data and configuration settings. You can access Recovery Console either from the installation CD or by installing the console onto the computer’s hard drive. To install the console from the CD in either Windows 2000 or Windows XP, insert the CD into the computer, disable autorun if necessary, open a command prompt, and enter d: \i386\winnt32 /cmdcons (where d is the drive letter of the CD drive). Follow the wizard prompts to install the console. When you finish, Recovery Console appears as one of the boot options for the computer. To use the console, when the system starts and offers you boot options, choose Recovery Console. When prompted, enter the administrator password. This takes you into a CLI. To see a list of command options available, enter help or /? at the prompt. Tools you can use with the console include diskpart, fixboot, fixmbr, and logon. NOTE: For a list of supported Recovery Console commands, go to http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/enus/recovery_console_cmds.mspx?mfr=true.
Homework Review and memorize the OS install and boot sequences. Consider how a sequence might change if you have a redundant array of independent (or inexpensive) discs (RAID) or if you are dealing with a dual-boot system. It is time to begin your driver collection. Start collecting every OS, support, drivers, and restore CDs that come with your computers. Make a backup copy of the restore CDs or DVDs. Continue your collection by downloading the drivers for the current hardware. You will thank yourself during the next OS install. The best place to get drivers is the manufacturer websites. If the device is no longer supported, check out sites such as Opendrivers.com or just Google the name of the device, the OS, and the word driver. Your collection CD or flash drive will become a go-to resource for you in the future.
Funwork An awesome site for IT questions and geek culture is http://geekgirlsnetwork.com. Chalk one up for girl geeks! If you plan to enter this field, you should probably know that this world is fundamentally coed and completely blind to ethnicity. The world’s best code crackers are two legendary women. Chances are good that your bosses will be women/minorities. You should probably Google Jane McGonigal, Marissa Meyer, Meg Ryan, and Padmasree Warrior. There are countless other women IT rock stars out there. The GeekGirlNetwork site contains a lot of really cool information. Check it out and have fun.
56
31 Days Before Your CompTIA A+ Exams
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 5 and 12
■
CompTIA A+ Cert Guide, CompTIA A+ by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 13, 14, and 15
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapters 11 and 12
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 12 through 16
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 14 through 17
Day 24 Laptops and Printers A+ 220-701 Exam Objectives Objective 1.10: Install, configure and optimize laptop components and features Objective 1.11: Install and configure printers
Key Points Truly, laptops, tablets, and cell phones are the future of PCs. This is a little scary for us in the repair business because portable devices are rarely fixable, considering the cost of replacement and rapid price depreciation. Entire offices are converting to laptops because they are often as cheap as their desktop counterparts. They use less electricity. And, we cannot forget the coolness factor. Portable computing is truly a landmark, a turning point in our culture. Just consider life without a cell phone, email, or MP3 player. The A+ exam follows major technologies and doesn’t especially care about what is trendy. The latter drifts into history like 8-tracks, portable game consoles, and Tamagotchi pets. What doesn’t change are the fundamental principles behind these portable devices. That is where the A+ exam focuses.
Expansion Devices Ever since the first portable computers became available, laptops have seen many devices and methods by which to expand and connect to other devices and resources. Today, PCIMCIA cards (PC cards), PCI Express cards, and docking stations are used to expand the resources and capacities of portable computers. These methods are used to add storage, network adapters, and additional ports, such as USB or FireWire, to laptops.
PCMCIA Cards and PCI Express Cards Mini-PCI expansion allows for some additional functionality of laptops. Personal Computer Memory Card International Association (PCMCIA) cards can be used if the laptop is designed for them. Another, more modern expansion slot for laptops accommodates ExpressCards. They look and act very much like PCMCIA cards, but they are actually a tiny bit narrower. (On a fun note, some say that PCMCIA really stands for People Cannot Memorize Computer Industry Acronyms.) Table 24-1 compares the laptop expansion cards.
58
31 Days Before Your CompTIA A+ Exams
Table 24-1
Laptop Expansion Cards
Bus Type
Thickness
Usage and Description
PCMCIA Type I
3.3 mm
SRAM flash (like a USB flash drive).
PCMCIA Type II
5 mm
Standard PCMCIA, used for modem, NIC, WiFi.
PCMCIA Type III
10.5 mm
Double thick, primarily used as an HDD.
ExpressCard /34
5 mm
The name notates the width in millimeters (34 mm).
ExpressCard /54
5 mm
Usually used for card readers and sometimes the cutest little HDD ever made. (Stick with solid-state flash drives.)
Installing PC cards and ExpressCards is relatively easy. In a lot of cases, they are “plug-and-play” and require little or no other configuration. However, always read the documentation that comes with the device to see whether there are any installation and configuration requirements. Depending on the device, you might have to install device drivers and application software to support the card (but only once). As shown in Table 24-1, not all cards come in the same size. Verify that you have a compatible card slot for the expansion card you want to use for your laptop. If you want to add a card slot to a laptop, the laptop must have an available, internal expansion slot. Expansion slots are common in desktop computers, but not so much with laptops due to space considerations. If your laptop has an available expansion slot, you can buy and install a card slot expansion card and install it inside the laptop. You must unplug the power adapter from the laptop and remove the battery, and then consult the documentation for your make and model of laptop to discover how to safely open the case and install the expansion device.
Docking Stations A docking station allows users to quickly connect to a device that actually is plugged in to many others like a mouse, keyboard, external monitor, flash and external drives, or a wired network interface card (NIC). A true docking station offers more functionality than a similar device known as a port replicator. As the name suggests, it simply replicates existing ports on the portable device and allows for quick, easy connection to that device. Docking stations and port replicators are not “one size fits all.” In other words, they are usually proprietary and made to service only one make and model of laptop. If you’re using a laptop with a compatible docking station, you should find it fairly easy to attach the laptop to the station and use a monitor, keyboard, and mouse combination. Line up the ports on the laptop to the analogous ports on the docking station. There should also be latches or pins on the docking station that match small openings on the laptop’s body that allow the laptop to be locked into place. If one or more docking station functions do not seem to work, verify that you have a good match of all the ports and apertures. Also make sure the monitor is on and that all external devices are firmly attached to the docking station. Most of the time, if you have a problem getting a laptop to work with a docking station, a loose connection is the problem.
Day 24
59
Laptops and Projectors When using a projector, practice first. Nothing screams newbie more than arguing with a projector during a presentation. Laptops save energy by not sending a signal to the external video port. To use the projector, external monitor, or TV, use the manufacturer’s keystroke combinations or buttons to redirect the video signal. Usually, it is the function key F8, but it varies by manufacturer. Check with the projector’s documentation and verify which ports on the projector and laptop must be used to attach them. (The projector should come with an appropriate cable.) Resolution on projectors is often much lower than laptops. Change the resolution to SVGA 800 by 600 or VGA 640 by 480 so that you provide a good, simple signal to the projector.
Communication Connections The following sections cover some common methods that laptops use to connect to devices and networks. It is important to understand these technologies beyond just trying to score well on the A+ exam. Resolving connectivity issues is a common entry-level technician task.
Bluetooth Devices Bluetooth is a proprietary form of wireless communication used to send and receive data over short distances. The most well-known application for Bluetooth is for portable phones, but Bluetooth is used in a wide variety of devices, from phone headsets to computer mice to mobile printers. Normally, as the version or class number increases, so does performance. This is not the case in Bluetooth. Class 1 is the longest range, with the most power (and also the most hearable by others). An earpiece for a cell phone does not need Class 1. On the other hand, Class 1 power might be exactly what is required at a sporting event or auditorium where there is a great deal of noise. Table 24-2 lists the three Bluetooth classes, power ratings, and distances. Table 24-2
Bluetooth Power Class Comparison
Class
Max Watts
Max Distance
Class 1
100 mW
100 m
Class 2
2.5 mW
10 m
Class 3
1 mW
1m
Some, but not all, laptops come with an integrated Bluetooth adapter. If your laptop has built-in Bluetooth, you might still have to add or configure the Bluetooth service. If the laptop does not come with integrated Bluetooth, you can install a Bluetooth adapter with a PC card or PCI ExpressCard, but you then need to install and enable the Bluetooth service. With Windows XP SP2 and subsequent versions of Windows, however, drivers for many Bluetooth devices are already present. When you purchase a Bluetooth adapter for your laptop, consult the documentation. If Windows doesn’t recognize the device, you must install the drivers using the disk that accompanied the Bluetooth device. Also, check the Control Panel and look for a Bluetooth Devices applet, which launches the Add Bluetooth Devices Wizard.
60
31 Days Before Your CompTIA A+ Exams
After installing the adapter, if you want to perform file transfers from your computer to another computer or other Bluetooth device, click Start, Run, type fsquirt in the Run box, and then press Enter. The Bluetooth File Transfer Wizard will launch. Then just follow the instructions for transferring files.
Infrared Communications Infrared (IrDA) communication uses the light spectrum just outside of human sight. It flashes on and off like a flashlight that generates a signal. The most important thing to know about IrDA is that the transmitter and receiver must be able to “see” each other. Radio signal propagates through walls, floors, and furniture. That is not the case with IrDA. (Think: TV remote control). Also, IrDA operates in half-duplex mode, which means an IrDA device can either send or receive at any point in time, like a walkie-talkie, not both at the same time, like a telephone. Table 24-3 summarizes infrared details. Table 24-3
Infrared Details
Standard
Value
Maximum range
1 m (39 inches)
Maximum throughput
4Mbps
Communication mode
Point-to-point ad hoc
Compatibility
IrDA
Security
None
Bluetooth and IrDA devices might not be plug-and-play. Some of these devices might require that you adjust the Advanced Configuration and Power Interface (ACPI) settings in the computer’s BIOS. Review the documentation for the device before attempting to install it to see whether it has any special configuration requirements.
Cellular WANs It is perfectly reasonable to think of cell phones when you think of cell phone networks, but cellular WAN networks can also be used to allow laptops to communicate over long distances. It is not typical for a cellular adapter to be built in to a laptop, so you’ll most likely have to add one using a PC card or a PCI ExpressCard. You will also have to contact your cellular provider and arrange to sign up for a plan to bring cellular WAN service to your laptop. There are three main connection types: ■
GSM, a global standard
■
CDMA, a domestic standard
■
3G or 4G, a cellular mode used for transmitting data and video
Some laptops, e-book readers, and tablets come equipped with an onboard cellular interface, and providers can bundle the adapter with a contract plan. So, activating cellular service for these devices becomes relatively effortless.
Day 24
61
As previously mentioned, if you want to install cellular WAN functionality, most of the time you must buy both the hardware device and the contract services. Before making your purchase, verify that the device is compatible with your laptop and compare the available cellular services with your personal/business needs and compatibility with the cellular adapter you want to purchase for the laptop. You might need to contact technical support or the sales division for your cellular provider for assistance.
Ethernet NICs It is not uncommon for laptops to have integrated wired Ethernets NIC. They are useful in a wired Ethernet environment, bypassing any added complexity of a wireless connection. The following is a list of what you should know about NICs on a laptop: ■
NICs function just like any NIC on an Ethernet network.
■
The NIC is active by default, but if necessary, it can be shut down by changing the BIOS configuration for the adapter.
■
External NICs can connect through USB or PCMCIA expansion slot.
■
Like all wired NICs, they use an RJ-45 port and RJ-45 head with eight pins.
■
Integrated or external NICs can provide data transfer speeds of 10 Mbps, 100 Mbps, or 1000 Mbps.
It would be unusual for a laptop to not possess an integrated NIC, and the most common data transfer speed is 100 Mbps, which is usually sufficient in most home and office environments. If the integrated NIC should fail, it would probably be very difficult, if not impossible, to replace the internal unit. The better solution is to purchase and install a USB or PC card NIC. You’ll probably have to disable the integrated NIC in the laptop’s BIOS before the replacement NIC will function.
Modems Laptop modems seem unnecessary in the day of ubiquitous 4G wireless connectivity, but not everyone uses a laptop in areas that support broadband. Sometimes an old-school mode is the only way. The following is what you should know about modems on a laptop: ■
Modems transmit data at 56 Kbps.
■
Modems can be an integrated device or connect through USB or PCMCIA expansion slot.
■
Modems use POTS (plain old telephone service).
■
Modems usually use a third-party application to manage the connection but can be controlled by commands.
■
Modems use an RJ-11 port and RJ-11 head that can support four pins that look exactly like regular phone cables (because they are).
Modems are less likely to come as integrated components in laptops. If you have a laptop that requires a modem, you have to add it as a USB device, PC card, or a PCI ExpressCard. Most computer/electronics vendors carry such devices, so find and purchase a modem device type that meets the specifications for your laptop and then follow the device’s installation instructions. As with most other PC card or USB devices, installation should be relatively simple.
62
31 Days Before Your CompTIA A+ Exams
Power Settings and Electrical Input Devices Laptops and portable devices run on batteries that are charged by a DC power supply. The wall power is 120V AC. A transformer converts that to a DC voltage level and amperage that the laptop or portable device expects to get. Do not assume that because the power connector fits physically that that means it “fits” electrically. It would be sad to fry your favorite cell phone because you gave the battery too much power too fast. Read the back of the transformer. The output of it should match the expected input of the portable device.
Autoswitching Power Supplies and Fixed-Input Power Supplies A fixed-input power supply expects a predetermined AC voltage input. In contrast, an autoswitching power supply is designed to accept a variety of AC inputs. These allow users to travel to countries that use many different voltage standards.
Batteries Batteries have come a long way over the past 20 years. Ask someone who had an early laptop or cell phone. It is not uncommon to find batteries that power laptops for more than 6 hours, although the kinds of usage affect the charge life. DVD and HDD disk access and wireless networking draw more power than normal. All batteries have “bad” chemicals in them, and local governments regulate how to dispose of or recycle batteries. Lead-acid, alkaline, and NiCd batteries tend to develop memories. A battery memory is a decrease in the time between charge cycles. In other words, it holds a charge for less time and takes longer to charge. Exercising the battery helps reduce the memory. To exercise a battery, you must charge it slightly above the normal voltage and then use it until no charge is left. Do this regularly and the memory will not be as much of an issue. NOTE: Remember that before installing or removing any laptop hardware for services, you should disconnect the power adapter and remove the battery.
Table 24-4 describes different types of batteries. Table 24-4
Batteries
Battery
Characteristics
Usage
Nickel-cadmium (NiCd)
Heavy, long life, develops a memory over time
Used for devices with large power requirements
Nickel-metal hydride (NiMH)
Moderate weight, moderate life expectancy
Cell phones, GPS systems, digital cameras, moderate power requirements
Lithium-ion (Li-ion)
Light, long lasting
Cell phones, laptops, medical devices
Lithium-ion polymer (LiPo)
Quick recharge, small, light, expensive, PDAs, laptops, MP3 players medium lasting
Day 24
63
When you purchase a laptop, it comes from the factory with a compatible battery and you can order one or more additional batteries at the time of purchase. Consult the laptop documentation before installing and using the battery in the laptop. Usually, you must install the battery (usually, they just slip in the battery slot and lock into place but check the laptop documentation to verify the installation method), and then attach the power adapter and cord and plug it into a wall socket or surge protector. The battery must charge for a specific period of time before it is ready for normal use. Laptop batteries eventually fail and must be replaced. You must use a battery that is compatible for the make and model of the laptop you are using. Using an incompatible battery pack, even if it physically fits in the laptop, can damage or destroy the computer’s electronic components. Always review the laptop documentation or the laptop manufacturer’s website to determine the battery required by the laptop.
ACPI Levels Advanced Configuration and Power Management (ACPI) refers to the different power states a device can possess. If a computer’s power state is lower than what a device requires, the device turns off automatically. ACPI levels are set in the computer’s BIOS, and when you install a particular device, you might need to go into the BIOS and manually configure the ACPI level. Here’s a brief summary of the seven ACPI levels: ■
S0: System is on.
■
S1: Power on, suspend state. CPU is not processing commands, and HDDs are off. Devices with S1 support are on.
■
S2: Standby state. Like S3 but with faster RAM refresh.
■
S3: Standby/suspend to RAM state. CPU not processing, RAM refresh is slower than S2.
■
S4: Suspend to HDD.
■
S5: Hibernate state. All hardware is off, including power supply but CMOS maintained by 5Vsb.
■
S6: Hibernate state. Same as S5 but CMOS maintained by onboard battery.
For modern laptops, you shouldn’t have to worry too much about ACPI levels when you install new laptop devices. Also, although this is important information to know for computer technicians, ACPI levels are not specified in the A+ exam objectives.
Input Devices Laptops have some unique input devices. Because of the size and weight limitations, some creative solutions have been developed over the years. This section outlines some of those devices.
64
31 Days Before Your CompTIA A+ Exams
Digitizers Input devices on portable devices range from touchscreens to styluses. A digitizer is an input device that understands X, Y position. Digitizers can use a stylus or a finger to identify what position the user has entered. Highly accurate digitizers are used by artists and animators to input hand-drawn art into a computer. Installing an external digitizer such as a stylus is much like installing any other device to a computer. In general, you need the device and the driver or installation disc. Each manufacturer has somewhat different installation procedures for their devices, so always consult the documentation for the device you want to add before performing any actions. When buying an input device, make sure it is supported by the operating system for your computer. If you use device drivers that were written for Windows Vista and Windows 7 on a Windows XP laptop, the device will probably not work, and installing improper drivers could cause unforeseen problems on the laptop.
Function Keys Laptops use function keys to change the mode or function of other keys. For example, there might be a ten-key number pad overlaid on top of a keyboard. A function key (Fn) might toggle between keyboard versus ten-keypad mode. Fn keys often control screen brightness, volume, external video port settings, and many more. There is no standard among manufacturers about the usage or functionality of function keys. Keep in mind that although some integrated features on the laptop can be controlled by function keys, others can be turned on or off only in the BIOS or by using a manual switch on the laptop. For instance, on some laptops, the radio used by the wireless (WiFi) interface is turned on and off by a physical switch. Unfortunately, no industry standard applies to which function keys operate which features on a laptop. Each manufacturer has its own conventions about what each function key will do. When managing a laptop using function keys, consult the documentation for the make and model of laptop you are using. If you do not have access to the original hardcopy documentation, you can usually download a copy from the manufacturer’s website.
Pointing Devices Examples of pointing devices include touchpads, point sticks, and track points. Laptops almost universally use an integrated touchpad to control the cursor. A touchpad uses capacitive and conductive sensing to determine X, Y positions. This is why fingers work on them but other objects do not. Some laptops have a small point stick that controls the cursor like a game controller. Others have a ball that controls the arrow in much the same way a ball mouse does.
Day 24
65
Printer Types You need to understand four common printer technologies to pass the A+ exam: ■
Laser
■
Inkjet
■
Thermal
■
Impact
In this field, you will spend quality time inside printers, so learn them well.
Laser Printers Laser printers are a good balance between cost and quality. They are quiet, reliable, and produce high-quality printouts. Laser printers are not cheap, and toner can be pricey. Except for the initial costs, the actual cost per page is quite low. Table 24-5 outlines the six steps of the laser-printing process. Table 24-5
Laser-Printer Process
Step
Details of Each Step
Mnemonic
1. Cleaning
The drum is cleaned by a wiper or in some cases an electrical charge can drop excess toner from the drum.
California
2. Conditioning
Puts uniform charge of –600 volts direct current (VDC). This phase is also called charging.
Cows
3. Writing
Laser traces the image on the charged drum and changes the voltage to –100 VDC in those areas the laser touched.
Will not
4. Developing
Negatively charged toner is applied to the drum and sticks to the areas with altered voltage.
Dance
5. Transferring
The secondary corona wire charges the paper. The toner is statically attracted to the paper.
The
6. Fusing
Rollers melt the toner and embed it into the paper.
Fandango
Inkjet Printers Inkjet printers include either thermal or piezoelectric nozzles. Thermal nozzles boil the ink, and jets of steamed ink are shot out onto the paper. Piezoelectric nozzles energize crystals that vibrate and control ink flow. In either case, the nozzles get clogged and misaligned. Routine self-testing and calibration is recommended to maintain high-quality print output. Photo paper allows the ink jets to produce very high-resolution, “photo-quality” pictures. Inkjet printers are usually inexpensive, but the ink can cost upward of $1 per full-color page. In many inkjet printers, all the ink cartridges must be installed and full even if you are printing a black-andwhite document.
66
31 Days Before Your CompTIA A+ Exams
Thermal Printers Used on point-of-sale systems, thermal printers print receipts and other inexpensive continuousfeed outputs, such as those produced by electrocardiograms, label makers, and old fax machines. The paper is stored on rolls and is treated so that heat darkens it.
Impact Printers A dot-matrix printer uses a group of pins that strike a ribbon against the paper. When the pins are used in combination, they create shapes of letters. A daisy wheel looks like a flower, and each petal has a letter, number, or symbol on it. It spins to the right letter and is whacked against the ink ribbon, printing the character onto the paper. Impact printers are measured in characters per second (CPS), not pages per minute (PPM). Near letter quality (NLQ) is the best quality a dot-matrix printer can have. Impact printers are used on carbon copy paper.
Local Versus Network Printers The three primary ways to connect to a printer are as follows: ■
Directly connected to a PC via USB, parallel, FireWire, or infrared (IR)
■
Directly connected to a remote networked PC that acts as a print server for the network
■
A networked printer that has a NIC and is a fully capable network device
Regardless of the physical connection, the drivers must exist on the PC from which the print job is sent. To start the process in Windows XP, select Control Panel > Printers and Faxes > Add New Printer. NOTE: The process varies a little depending on what version of Windows you are using. For Windows 7, click Start > Devices and Printers > Add Printer.
This wizard searches for directly connected PCs or searches for print servers on the network. If it doesn’t find the printer, check the obvious things first: Is the printer plugged in and turned on? Does it have paper and ink? If it is a network printer, check whether the network settings are correct. Is the printer “online,” meaning is it ready to receive print jobs? Is there a job stuck in the queue? The queue is RAM on the printer that stores multiple jobs in the order they were received. If the printer stops working, end users have a terrible habit of repeatedly clicking the Print button in an effort to motivate the printer back into service. Be sure to clear the queue before printing a test page. TCP/IP printers are controlled by a printer server. Print jobs are sent to the print server and are then forwarded to the printer. It is important to note there are two styles of print servers. One is a standalone PC with a NIC connected to the network and a USB directly connected to the printer. The other print server is built in to the printer. These network printers connect directly to the network, and the printer manages the print services with no need for a dedicated PC.
Day 24
67
Printer Drivers (Compatibility) In the real world, it is not at all uncommon for multiple printers even with disparate model numbers to use the same print drivers. That said, if the A+ exam asks, the answer is that the exact driver for the specific printer must be properly installed on the PC for it to work. The drivers are located on the CDs that came with the printer or online. Many techies prefer the online versions because they are the most up-to-date. On the manufacturer’s website, review the information about the drivers before downloading and installing to make sure they provide the functionality you require.
Consumables This is a tricky topic. There seems to be an inverse relationship between the cost of the printer and the cost of the consumables. An inexpensive inkjet printer can run between 25 cents to $1 per page depending on color and density of the image. Black double-spaced text is considerably cheaper to print than a full-color, full-page photo. Laser toner often costs hundreds of dollars per container, but you get thousands of pages per container at a considerably less cost per page. When advising your customers, keep the cost of consumables in mind.
Homework Review the batteries, ACPI levels, and the PCMCIA types. These topics are an A+ exam favorite.
Funwork If you have access to Vista, check out Windows Journal in the Accessories or under Tablet in the Start menu. It is the application that supports tablet PC handwriting recognition. You can use a mouse to “hand write” something even if you are not using an actual tablet. Select the “hand writing” and convert to text. Lots of fun. Search online for three laptops: One for less than $400, one for around $2000, and one for more than $4000. Compare and contrast them component by component and determine why the disparity in price exists for essentially the same device. If you want a real challenge, go find out what a Tamagotchi digital pet is.
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 6 and 7
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 9 and 11
68
31 Days Before Your CompTIA A+ Exams
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 9, 17, 21, and 22
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 21 and 22
Day 23 Basic Troubleshooting and Preventive Maintenance A+ 220-701 Exam Objectives Objective 2.1: Given a scenario, explain the troubleshooting theory Objective 2.2: Given a scenario, explain and interpret common hardware and operating system symptoms and their causes
Key Points Today you learn the official troubleshooting method for the A+ exam. This is a short chapter but contains many useful real-world ideas and skills. The funwork is particularly fun today.
Troubleshooting CompTIA has put together a step-by-step approach to troubleshooting. It is a not bad method, but there is some disagreement among techs as to the merits of this highly structured approach. Regardless, it is all over the A+ exam, so you should probably memorize the following steps and be able to recite them in order. Do that, and these will be slam-dunk questions when you get them. 1. Identify the problem. 2. Question the user and identify user changes to the computer and perform backups before making changes. 3. Establish a theory of probable cause (question the obvious). 4. Test the theory to determine the cause. 5. Once the theory is confirmed, determine the next steps to resolve the problem. 6. If the theory is not confirmed, establish a new theory or escalate. 7. Establish a plan of action to resolve the problem and implement the solution. 8. Verify full system functionality and, if applicable, implement preventative measures. 9. Document findings, actions, and outcomes
70
31 Days Before Your CompTIA A+ Exams
More on Troubleshooting The following is a list of additional ideas and philosophies about troubleshooting collected from computer geeks all over: ■
Always back up user data before anything else.
■
Assume that their data contains malware and use caution and your own updated antivirus to scan their stuff.
■
Always protect customer passwords, data, billing, and personal information as if it belonged to your mother. When you no longer need this information, destroy it—the passwords, not the customer.
■
Use open-ended questions (such as, “Tell me what you were doing when the problem first occurred”) and closed-ended questions (such as, “Does the problem happen before or after you send email?”) in your information gathering from the customer.
■
If the computer worked before and doesn’t work now, something changed. Find out what.
■
Start with the least-invasive fix and progress to more potentially damaging or risky fixes. For example, do not replace the CPU because the user cannot check his email.
■
Reduce complexity. Start with power supply, motherboard, RAM, and CPU. Then add storage, I/O ports, and cards. Finally, look at peripherals. At some point, it will lock up or fail to boot. The problem is probably with what you just added or what the computer’s compatibility is with that device.
■
Always clear the print queue before fixing the printer, lest there be 300 pending copies of waiting documents.
■
Always consider user error. Ask them to reproduce the symptom while you are with them to see if it is just a simple learning moment for them.
■
Consider office politics and sabotage. “Let’s see if the new kid (you) can defeat a simple shutdown script in the startup folder.” FYI: F8 on boot, choose Safe mode, remove the script from the Startup folder, and then restart the PC in normal mode.
■
Regardless of how icky the equipment was when they gave it to you, physically clean the customer’s equipment before you return it or when you have completed onsite work. It takes no time and makes you look like a pro.
■
In this order, look for drivers and how-to resources: 1.
Manufacturer’s website.
2.
Documentation and software that came with the equipment.
3.
Legit forums (if you are having a problem, there is a strong chance someone else has had the same problem).
4.
TechNet.
5.
Tom’s Hardware.
Day 23
6.
CNET.
7.
Finally, do not forget about your training and exam prep materials!
71
Some techs keep a notebook of the issues they’ve worked on and how they were solved. Others use a database tool (such as Microsoft Access) to keep such records.
Memory Dumps If the RAM has a problem, the system crashes. It produces the blue screen of death (BSoD) and displays a stop code. True ubergeeks can read this and figure out which memory block failed, where, why, and so forth. For the fledgling tech, write down the stop code and the explanation. Go to a working PC and Google the stop code and explanation. Many great sites provide information about stop codes. The cause is often badly written or corrupt software and drivers. Sudden restarts are often BSoDs followed by an immediate restart. (Not to be confused with sudden shutdowns, which are usually caused by overheating.) BSoDs are not exclusive to Windows. The diversity of hardware and applications written for Windows makes it more susceptible. If you suspect bad RAM, consider one of the multiple memory-testing programs that are available. You should have this in “your bag of tricks.”
Homework Memorize the official step-by-step troubleshooting method. There’s a good chance you will see it on the A+ exam.
Funwork Listen to podcasts of Car Talk at http://www.cartalk.com. These guys troubleshoot car problems during a call-in radio show. Know that they have a reputation for being wise guys. People who call them for help know they will be teased. (That kind of behavior while working at a help desk is considered to be anything but career enhancing.) But do listen to how they troubleshoot using the wide-to-narrow approach. They often find the problem is “user error.” Listen to how they handle it with humor, but respectfully. Their opinions are often sought to support arguments among “end users.” Notice how they always develop a close rapport with the customer by the use of banter. Just keep in mind that what works for Car Talk wouldn’t work in an actual auto garage, and it wouldn’t work for a PC technician. Those who are experiencing computer problems are usually upset, usually behind on their work because of the problem, and most nontechnical people feel inadequate when talking to a technician about their PC problems. Sometimes customers are concerned that the technician will blame them in some way for damaging the PC. If you try to use “Car Talk banter” with these customers, they likely will become even more upset and probably even become offended. That doesn’t mean you have to throw your sense of humor out the window. A lighthearted and easygoing approach can put a customer at ease. Just make sure any jokes you tell cannot possibly be taken as a criticism of the customer.
72
31 Days Before Your CompTIA A+ Exams
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 4 and 10
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapter 18
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapter 5
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 3 and 11
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition, by Mike Meyers. Chapter 27
Day 22 Troubleshooting Laptops and Printers A+ 220-701 Exam Objectives Objective 2.3: Given a scenario, determine the troubleshooting methods and tools for printers Objective 2.4: Given a scenario, explain and interpret common laptop issues and determine the appropriate basic troubleshooting method Objective 2.5: Given a scenario, integrate common preventative maintenance techniques
Key Points Today we talk about troubleshooting laptops and portable devices and printers. Familiarizing yourself with the care, maintenance, and troubleshooting of these devices is definitely time well spent.
Cleaning Laptops To do any work, even cleaning, you absolutely must unplug all peripheral devices (some devices, such as a camera, might have their own power supply), unplug the laptop from the wall outlet, and remove the battery. Some laptops have more than one battery. Spray cleaning solution on a soft lint-free cloth, and then wipe the laptop. Do not spray anything onto the laptop; they do not swim very well. Never use a paper towel on an LCD screen. It will permanently scratch it.
Repairing Laptops Portable devices are surprisingly tough, but because they live in the world rather than in a climatecontrolled, secured server room, they tend to take extreme abuse. Repairing a laptop is simple. The parts that break have their own access panel: RAM, battery, HDD, and expansion slot devices. Parts that break and cost more to replace than the value of the laptop are difficult to access: CPU, motherboard, and LCD screen. It is imperative that you explain this to your customers before you commit to a major repair on a laptop (considering their very short life span).
Common Laptop Problems and Solutions Unfortunately, repair of many common problems is often an economic death sentence (for example, cracked LCD screens, battery failure, water damage, and overheating). First, check to determine whether the laptop is still under warranty. Many laptops come with a 3-year warranty under the condition that it gets fixed by the manufacturer. You do not want to be the one who voids it on behalf of your client. Table 22-1 shows some common laptop problems, all of which are fair game on the A+ exam.
74
31 Days Before Your CompTIA A+ Exams
Table 22-1
Common Laptop Problems
Laptop Problem
Solution
Blank screen.
Check for LED, heat, vibrations, or other signs of life. (It might not be turned on.) The video might be redirected to the auxiliary port for a projector. The brightness or contrast might not be set correctly. The video drivers or resolution might not be set properly. Test the battery with a multimeter.
Dim screen.
Check for a brightness option in the BIOS, Control Panel, or Power Management; sometimes a button controls this manually.
Black border.
Adjust the resolution in display properties. Check the BIOS for monitor settings. Reinstall or roll back the video drivers.
Battery will not charge.
Visually inspect the power adapter port on the laptop. Many laptops die because the power adapter was plugged in as the laptop pushed against something. It could be that the battery’s life has ended. They do not last forever.
Battery drains rapidly.
The battery has a memory and will need to be replaced soon.
No networks detected.
Check on the outside of the laptop for a WiFi (and often Bluetooth) on/off switch. Verify that a properly working wireless local-area network (WLAN) is available and it is set up to allow more PCs. Start the basic troubleshooting process of enabling the device in the BIOS and installing correct drivers in the Device Manager. In the case of a network interface card (NIC), make sure the network settings are correct.
Touchscreen will not respond.
Treat it like any other input device: Enable it in the BIOS; install correct, updated drivers in the Device Manager; and ensure the touchscreen application is running. Calibrate it using the application. If necessary, train the user how to use the touchscreen.
Video Ports External video ports allow laptops and portable devices the ability to interface with external monitors and projectors. Usually laptops have a key combination or function key that toggles among three modes: ■
Native screen only
■
Both native and external screens
■
External only
The external screen can be a duplicate or an extension of the native screen.
Day 22
75
Keyboards Laptop keyboards are cramped enough. Cell phones make laptop keyboards look like an airport. Be sure to vacuum dirt and stuff out from under keyboards. Compressed air only pushes it farther into the crevasse. Replacing laptop keyboards is a notoriously complicated task. A best practice when disassembling a laptop is to briefly sketch out the device and as you remove the screws punch them through the paper where they belong on the diagram. The screws will not roll around and you will ensure the same screws go in the correct place. Remember there is no standardization among laptop manufacturers. In a PC, in a pinch, you can be creative and borrow screws from other devices. It is imperative laptops be reassembled correctly. The same holds true for printer and projectors. There are no standards, and they must also be assembled correctly. Use the manufacturer’s website to determine how to disassemble the laptop.
Wireless Cards Compatibility: Is it A, B, G, or N? Is it WiMAX, Cellular, Bluetooth, IrDA? Too much! Let’s make this simple. What type is the wireless access point? The laptop or portable device must be the same or at least compatible. How far away is the device from the access point or antenna? It goes without saying that the laptop must be within range. The tricky part is knowing what is exactly “in range.” That range varies considerably from 1 meter for a class 3 Bluetooth to many kilometers of coverage for cell towers. Just make sure it has enough signal strength. An integrated NIC is enabled by default but can be disabled in the BIOS. It must have correct drivers. It must have an application that manages the connection. All Windows and Mac operating systems have native applications for that. That is not necessarily true for Linux, although in Ubuntu wireless management apps are available. If they aren’t for the distro you’re using, you may need to download them specifically for your NIC. Make sure you know about the button on the side of the laptop that turns on and off the wireless NIC. Nothing screams “newbie” louder than failing to flip the switch after spending quality time (and your customer’s money) troubleshooting the NIC. NOTE: As a rule, the WiFi management utility for Windows tends to do a better job and is easier to use than the app that comes with the WiFi adapter.
A Lifeless Laptop? Verify power (for example, LEDs, swap AC adapter). Check the battery with a multimeter. If it works only while plugged in, consider replacing the battery.
Peripheral Problems? Remove all peripherals, and then add them one by one until it fails. Start there. You typically use this technique with desktop computers as well, and it proves especially handy when you encounter a severe problem, such as a computer not finishing the boot sequence or when you encounter a blue screen.
76
31 Days Before Your CompTIA A+ Exams
No Video? Plug in the external monitor, toggle the Fn keys, check the hardware switches, and check the LCD cutoff switch. If you still have no luck, verify backlight functionality and pixelation. Also, check the laptop’s RAM, because this is a common cause of video issues.
Woeful WiFi? Always first check the switch for built-in WiFi antennas or external antennas. Then ensure that the BIOS is enabled, that Device Manager has good drivers, that Windows Wireless Zero in the Services is enabled, and that the WiFi management app indicates that the wireless adapter is receiving a signal.
Common Printer Problems and Solutions Table 22-2 lists common printer problems and their solutions. It is uncommon but not unheard of to attach commercial printers to UPS devices to avoid losing large jobs in the event of a power outage. However, you should not attach a laser printer to the UPS. Laser printers draw a large amount of power and can damage the UPS battery. Table 22-2
Common Printer Problems
Printer Problem
Solution
Streaks or lines on the paper.
Replace the toner cartridge.
Consistent tick marks.
Clean or replace the drum.
Prints gibberish characters.
Reinstall the drivers or clear the printer queue, turn off the printer, and reboot the computer. Replace the cable connecting the computer with the printer.
More than one sheet of paper enters the feeder at the same time.
Humidity causes paper to “clump.” Store paper in cool, dry area.
Printer will not pick up the paper.
Clean the grip wheel with a cotton swab and 70% isopropyl rubbing alcohol. Replace the pickup roller if it is “smooth.”
Paper tray does not push paper up high enough.
Check the spring tension in the tray.
General troubleshooting of an All-in-One device.
Test all the functions and features of which the device is capable, such as print, fax, copy, and scan.
Managing Print Jobs The management of print jobs is a shared responsibility between the computer and the printer. The print spooler is a to-do list for the printer managed by the PCs that connect to it. In Print Preferences, you can specify a great many things about the individual print job at hand. Print Properties affects how your computer interacts with a printer. The most common tool for testing printer functionality is to print a test page. This is done through Print Properties. Probably the first test you should run is a self-test from the printer. If that works, the problem is likely in the communication between the printer and the computer.
Day 22
77
Homework Search online for information about troubleshooting laptops and laptop repair. Many good flowcharts and videos are available. Note what kinds of tools are used, where the devices are located, and what they look like inside a laptop. Think back over the subjects, tables, and descriptions discussed in the past 9 days and pinpoint the subjects you struggled with the most. Review those sections in this book and in the IT Essentials course. Use HowStuffWorks, TechSpot, Cnet, TechRepublic, PC Magazine, ZDNet, or other good resources to explain the topic to you in a different way. You have an exam in a week. Be sure that you’re ready.
Funwork Find an appropriate printer for each of the following clients: ■
An advertising agency that produces poster-size, full-color ads for store windows (prints on plastic film).
■
A college student who will move frequently over the next 4 years (small, light, and tough).
■
A small home/small office (SOHO) wireless network for a real estate firm (legal-size paper is a must).
There are many correct answers, but these are a good start: ■
HP DesignJet Large Format series or Epson Stylus Pro Large Format series with static cling vinyl material rather than paper. The printer is capable of printing on plastic film and the format can manage poster-sized color output.
■
Canon i70 or i80 or HP DeskJet 460 series. These printers are small, lightweight, portable, and inexpensive (perfect for a “struggling student’s” needs).
■
Brother SOHO-class series or HP Laser All-in-One series, preferably with built-in network support. All-in-One devices are handy for SMB environments where not a lot of space may be available and the SOHO owner doesn’t want to incur the expense of a separate machine for faxing, printing, copying, and scanning. Ethernet or WiFi support is a plus, because computers on the local network can send print jobs to the device directly.
As a funwork bonus, go to YouTube and do a search for how to install printers or a similar search string. You’ll find some fascinating videos on how to install USB, Ethernet, and WiFi printers. Sometimes seeing and hearing how it is done makes the tasks much easier to learn.
78
31 Days Before Your CompTIA A+ Exams
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 6 and 7
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapters 9 and 11
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapters 5 and 11
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 9, 17, 21, and 22
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 21 and 22
Day 21 Networking Fundamentals A+ 220-701 Exam Objective Objective 4.1: Summarize the basics of networking fundamentals, including technologies, devices and protocols
Key Points Networking can be a surprisingly difficult part of the A+ exam, and many future techies get discouraged or unwisely dismiss it as unimportant. Question: When was the last time you saw a completely standalone, non-networked PC? Today, even calculators and kitchen appliances communicate on a network. By enabling automatic updates, your computer, your refrigerator, or your car run a self-diagnosis, find a problem, “call” home for advice on how to fix it, download a fix (an update), install it, and run just fine without you (or the customer) even knowing a problem existed. It truly is a connected world. Yes, there are a lot of models, acronyms, and mind-boggling number theories. There is no getting around the fact that networking is just as important as motherboards, drivers, printers, and security.
LANs, WANs, and WLANs A network is a group of PCs and devices that serve different functions.
LANs In a local-area network (LAN), devices are close by (within a building, campus, or house) and include use of upper-layer protocols. LANs are end-user oriented.
WANs Wide-area networks (WAN) are full of Layer 2 and 3 devices (switches and routers) and contain few actual computers. WANs connect LANs to each other and can extend enormous distances around the world, and literally beyond into space, using wireless technologies.
WLANs Wireless LANs (WLAN) are commonly known as WiFi. These “spots” allow portable devices such as PDAs, phones, laptops, heart monitors, alarm systems, and others to connect to each other and to the Internet. The physical layer of a WLAN is the antennas and radio signals.
80
31 Days Before Your CompTIA A+ Exams
OSI Model The seven-layer Open Systems Interconnection (OSI) model reduces complexity, ensures interoperability among devices, and simplifies learning. Although you will not be tested on the OSI model on the A+ exam, a general knowledge of these layers will help you remember information on which you will be tested. Table 21-1 describes the layers of the OSI model. It is important to memorize this table. Table 21-1
OSI Model
Layer
Name
Mnemonic
Description
7
Application
All
This layer is the actual application (for example, email, browser, IM client). The “layer” above this is the user.
6
Presentation
People
This layer is all about how data is presented to the application. Is it compressed? It will need WinZip or another utility in the application layer. Is it a PDF file? It will need Adobe Reader. Do not have it? The user will see a file with an unassociated extension.
5
Session
Seem
This layer establishes, maintains, and terminates communications.
4
Transport
To
This layer deals in flow control. If someone is talking too slowly, you might ask him to speed up. The opposite is also true. If something is missed because the speed is too fast, the receiver asks the sender to send it again, just as you would in a conversation. This is error checking and correction. Both Transport Control Protocol (TCP) and User Datagram Protocol (UDP) operate at this level, but only TCP performs error correction. UDP does not provide this service. Also, port numbers and firewalls are in this layer.
3
Network
Need
IP addresses are assigned in this level. An IP address is considered logical because it can be assigned by the administrator or given out by a Dynamic Host Configuration Protocol (DCHP) server. Routers make routing decisions here based on the name and network information.
2
Data link
Data
Media Access Control (MAC) addresses are in this level. They are “permanently” burned into the network interface card (NIC) and are therefore considered physical and “unchangeable.” Do not assume that the physical address is in Layer 1. Devices in Layer 2 are switches and bridges. A switch has many ports and a bridge has few. Both perform switching, but bridges are nonexistent in the real world.
1
Physical
Processing
These are the actual wires, light impulses, or radio waves that carry the data. Devices here include hubs and repeaters. Hubs have many ports and repeaters have few, usually two.
Day 21
81
Layer 1 devices cannot make decisions. They just retime, regenerate, and reproduce the signals (bits) they receive. Hubs, cables, and connectors function at Layer 1. When troubleshooting networks, it is often smart to start with Layer 1. Layer 2 devices make up the majority of networking traffic. Layer 2 devices, such as switches and NICS, read and determine whether they recognize the MAC address in frames. If not, they send it to everyone to see whether the others have heard of the address. If they have heard of the destination MAC address, Layer 2 devices forward it down that port only. This is called switching. The name comes from switching locomotive trains and from old-school telephone operators who manually connected and disconnected, or switched, wires to make connections. Layer 3 is where routing decisions are made. Routers direct packets using routing protocols to determine the best path for each packet.
Simplex, Multicasting, Half-Duplex, and Full-Duplex Communications Simplex, often called broadcast, is a standard TV- or radio-style signal. One transmitter to everyone, and no one talks back to the transmitter. Multicast requires a naming scheme. One sender, many receivers, and everyone hears the message. If receivers hear their name as one of the many destination addresses, they actually pay attention to the signal and pass it up to other layers. Half duplex is like walkie-talkies: One person talks, and the other listens. Then they switch roles. This turn taking is initiated by first listening to confirm that no one else is talking. That is called carrier sensing, which is a critical part of carrier sense multiple access collision detect (CSMA/CD), which we discuss in a moment. Full duplex is like a phone conversation. The sender and receiver work independently of each other.
Network Addressing Network devices use two different address types: ■
The MAC address. The MAC address functions in the data link layer (Layer 2). MAC addresses are used in communicating with the closest device (a hop).
■
The IP address. The IP address is a network layer (Layer 3). IP addresses are used when communicating with other computers on the LAN or Internet.
MAC Addresses You cannot help but have a unique MAC because the first half of its 48-bit address (the first three octets in a hexadecimal address) is the organizational unique identifier (OUI). Every NIC manufacturer gets one. The last half is assigned by that company, like a serial number. The MAC address 00-0C-41-68-B2-85 means that it is made by Cisco Linksys. (68-B2-85 is the number that Cisco Linksys gave that NIC.)
82
31 Days Before Your CompTIA A+ Exams
IP Addresses An IP address is one of the two types of addresses attributed to every network device. IP addresses are a logical aspect of networking because they are changeable. There are four octets in an IP address. It is actually four, 8-bit binary numbers, but we read them as “normal” numbers, where each octet can be any number from 0 through 255. For example, 192.168.0.4 is a standard IP address, but 192.256.0.4 is not because the 256 is too big for that octet. Watch for this on your A+ exam. They love to ask things like, “Which of the following is a valid IP address?” or “Which of the following is a valid MAC address?”
Subnets Do not be scared of numbers. People who understand numbers get paid to understand them. A subnet simply divides an IP address into two parts so that network devices can pay attention to only the pertinent part of an address. A subnet mask such as 255.255.255.0 is actually 11111111.11111111.11111111.00000000. The 1s represent the name of the network, and the 0s represent the name of the computer. Imagine an addressed envelope. The bottom line is the big picture: city, state, country, and ZIP code. The street address is useful only after the letter actually gets to the correct part of the world. Once it arrives in the city, the bottom line is ignored (masked). Once it enters the house, the lower two lines are ignored. Imagine an address such as 11.22.33.44. If you “apply” a subnet mask of 255.255.255.0 to that IP address, you are telling the network devices that 11.22.33 is the name of the network and the individual computer is called 44. What happens if we apply this subnet mask 255.255.0.0 to the same address? Now, you have told the network devices that 11.22 is the part of the address signifying the network and that the part of the address signifying the computer is 33.44. A subnet mask of 255.0.0.0 indicates that 11 is the part of the address signifying the network, and 22.33.44 is the part of the address signifying the computer. Does moving the “line” have an effect on the number of hosts and networks available? That’s kind of the point.
A Class Act The following information will probably be on your A+ exam, so understand this. Let’s reduce this to a few if-then rules. ■
If the first octet (the number before the first decimal or “dot”) is between 1 and 126, then it is a Class A address and has a subnet mask of 255.0.0.0.
■
If the first octet is between 128 and 191, then it is a Class B and has a subnet mask of 255.255.0.0.
■
If the first octet is between 192 and 223, then it is a Class C and has a subnet mask of 255.255.255.0.
■
If the address is between 224 and 255, then it is probably a distracter (that is, wrong answer). Yes, we use those ranges but they aren’t on the A+ menu. Stress not.
■
If you get a question about the address 127.0.0.1, then know that it is the loopback address. Pinging 127.0.0.1 tests your NIC regardless of the actual assigned IP.
Day 21
83
Really Big Numbers All the addressing and subnet masks we have used so far are called Internet Protocol Version 4 (IPv4). It contains 2 to the 32 total number of addresses. In other words, these are 128-bit addresses. That is pretty big number, right? You better sit down. We are moving to IPv6 with 2 to the 128 number of addresses. Now that is a big number. The A+ exam asks you to identify valid IPv6 addresses only. More if-thens: ■
If the number contains groups of four hexadecimal digits (0–9 and a–f) separated by colons, then it is probably a valid IPv6 address.
■
If there is only one instance of a double colon (::), then it is probably a valid IPv6 address.
■
If the number contains any letter besides a–f or has more than one double colon, then it is probably not a valid IPv6 address.
■
If you’re taking your career seriously, then you will not let fear of really big numbers limit you.
■
If you still do not understand IP addressing, subnet masks, or how to identify a valid IPv6, then do not give up. Own your learning and get on Google, ask current geeks, ask your teacher, ask your friends. This number stuff is really important.
Network Topologies A network is a physical collection of devices that share data and resources to increase efficiency and reduce duplicate devices, such as printers, Internet connections, and file storage. It provides centralized points for backups and management, but also provides centralized points for failure.
Physical Topologies Physical topology defines the layout of the physical connections. Star/extended star means a central point allows and controls flow to the rest of the network. Rare is a true star. Usually, the pattern is an extended star with branches off of other branches in a tree-like pattern. This pattern is referred to as hierarchical. A physical bus topology is also rare. It looks like one common cable with transceivers that tap into that line for each node. This topology is used mainly as a logical concept, not so much as a physical one. Physical ring topologies are also rare, but they do exist. The most common example is a fiber-optic cable. Picture a circle with data flowing along that ring between two computers. Picture an inner circle with information that flows in the opposite direction between the same two computers. Now squeeze that circle into long inner and outer ovals and eventually into four straight lines. That is how data on a fiber-optic cable flows.
Logical Topologies The most common topology is a star/bus topology. That means a physical star and logical bus. Logical bus (often referred to as broadcast or Ethernet) means everyone hears everyone else and pays attention only when they hear their name. The other and less-common kind of network is a
84
31 Days Before Your CompTIA A+ Exams
star/ring. That means the token is passed from one computer back to the device that looks like a switch or hub but actually functions a little differently. The multistation access hub (MSAU) looks just like a switch, but it is not a star topology. The MSAU sends the token down the first port to whatever device is on the other end, and that device sends it back. The token is sent down the next port and sent back by the next device, and so on. If any device has something to send, it waits for and then attaches the packet to the token and sends it back to the MSAU. Taking turns like this prevents collisions, but is slower. NOTE: MSAU devices are used with Token Ring network technology, which is considered rare to obsolete. It is good to know something about legacy networks because you might run in to one occasionally, but it is unlikely this information will be covered on the A+ exam.
Client/Server Networks and Peer-to-Peer Networks Another topology that functions in the upper levels has to do with the roles and relationships among the network devices. Client/server networks are centralized, hierarchical, and easy to grow. Dedicated servers provide resources to client PCs. This topology is used when authentication and security is important or the network is highly dynamic. It is also used to help organize large networks. Peer-to-peer means any PC can be a client or server at any time or all the time. Peer-to-peer networks are good for small environments (for example, residential or small office/home office [SOHO]). Management is more difficult because the resources aren’t centralized.
Network Architectures As if groups, topologies, addresses, subnetting, and dedicated roles aren’t enough micromanagement, we also need important-sounding names to define the physical layer concepts. Because “stuff goes from here to there” is not good enough on the A+ exam, you need to memorize the official names for these protocols. The standards organizations are spelled out tomorrow. For now, just focus on memorizing these next few tables. Table 21-2 lists the different network architectures and the organization that defines each. Table 21-2
Network Architectures
Architecture
Standards Organization
Memorization Tips
Ethernet
IEEE 802.3
“Threee” sounds like “Eeethernet.”
Token Ring
IEEE 802.5
A pentagon has five sides and is in the shape of a ring.
FDDI
ANSI and ISO
Fiber-optic cable. The double D is a reminder that it is a double-ring topology.
WiFi
IEEE 802.11
The 11 looks like two antennas.
Day 21
85
The Physical Layer of Ethernet All Ethernet cabling terminates with RJ-45 heads, uses a star/extended star topology, has a range of 100 meters (328 feet) per segment, has four twisted pairs of wires (but their usage varies), and all specs are defined by TIA/EIA. Table 21-3 shows the differences in Ethernet cabling. Table 21-3
Ethernet Cabling Comparison
Cabling
Speed
Cable Category Rating
Wires Used
10BASE-T
10 Mbps
3, 4, or 5 (normally 5)
2 pairs
100BASE-T
100 Mbps
5, 5e, and 6 (normally 5)
2 pairs
1000BASE-T
1000 Mbps
5, 5e, and 6 (normally 5)
All 4 pairs
The Physical Layer of WiFi The physical layer of WiFi might seem like a contradiction in terms. After all, the whole point of wireless is to avoid the physical connection. Still, WiFi has to move the physical data, in this case in the form of radio signals. All WiFi standards for the A+ exam are defined by IEEE 802.11. The four standards are A, B, G, and N. The A standard is only compatible with the N standard and has a very small range of 150 feet (45.7 meters). It is rare to find it today. The B and G standards are interoperable with each other, and N is compatible with A, B, and G. Table 21-4 compares the IEEE 802.11 standards, summarizing their differences. Table 21-4
Wireless Comparison
802.11
Bandwidth
Frequency
Max Range
A
54 Mbps
5 GHz
150 feet (45.7 m)
B
11 Mbps
2.4 GHz
300 feet (300 m)
G
54 Mbps
2.4 GHz
300 feet (300 m)
N
540 Mbps
2.4 or 5 GHz
984 feet (250 m)
Bluetooth Bluetooth is generally used to connect one device to another (sort of like a wireless USB cable). It is actually meant to replace infrared (IR), which it does superbly. The protocol supports file transfer and streaming signals. It uses a frequency-hopping technology, so it is harder to hack, and it does not interfere with other devices that function in its 2.4-GHz frequency range. Bluetooth is widely available in laptops and cell phones. A MAC address scheme allows one Bluetooth controller to connect with up to eight devices.
86
31 Days Before Your CompTIA A+ Exams
Homework ■
Memorize the OSI chart in Table 21-1. It is not listed in order of importance because it is all important.
■
Review the physical and logical topologies.
■
Review the various groupings of network devices, both logical and physical.
■
If you think networking is confusing, have several people explain IP networking to you in their own way. Chances are that you know someone who speaks networking. Buy that person a coffee and ask him or her to explain it to you. You can find dozens of networking introductory tutorials online, too.
Funwork Wow, that is a lot for one day. Guess what? There is even more tomorrow. Take a breather and take a long look at the big picture to get perspective. Google “fiber-optic submarine cable system map” and look at a map of undersea fiber cables. In a new browser, go to http://science.nasa.gov/Realtime/Jtrack/ (make sure your Java is updated). Click the 3D version. Drag the world around a little and click several dots. Each one is a satellite in orbit. Here is the fun part: Display both the ocean map and the satellites and realize that every piece of data, TV broadcast, phone traffic, radio signal, civilian communication, military communication, every channel, and every flood of data traffic uses these routes and only these routes. It is not some nameless, faceless “cloud.” Further, realize that more often than not, there is a piece of Cisco equipment on both ends of each of these lines and the transmitters for each satellite ground station. Seriously. And it is people like you who make these things work. Anytime you stream audio or video, download something from the web, or send an email, you are using these actual satellites, submarine cables, and the myriad microwave and land-based systems. That is pretty neat. That is information technology making magic a reality. That is a class of third graders in London playing chess via ooVoo with third graders in Sudan. That is farmers in Bolivia reading cutting-edge agriculture research from Cornell using online language translation. That is movies on demand, like every movie ever made on demand. That is a passionate 911 call about a car crash from a cell phone in a desolate part of Nevada with nothing but desert to the horizon. That is a rug maker in Iran selling his craft worldwide and getting a fair price. That is a trash-talking grudge match on Xbox Live between a future boyfriend and girlfriend. That is GPS, WOW, Google Earth, Craigslist, Flickr, PayPal, and Amazon. If you do not think all this is magic, explain any one of those to someone 100 years ago. Alright! Get your head out of the clouds and get ready for a second scoop of networking tomorrow!
Day 21
87
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 8 and 15
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapter 16
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapters 10, 13, and 14
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapter 18
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapter 23
This page intentionally left blank
Day 20 More Networking Fundamentals A+ 220-701 Exam Objectives Objective 4.2: Categorize network cables and connectors and their implementations Objective 4.3: Compare and contrast the different network types
Key Points Today continues the networking discussion by comparing the Open Systems Interconnection (OSI) reference model (covered yesterday) with the TCP/IP model. You also review network protocols and the organizations that standardize various aspects of networking so that devices and technologies from different vendors can work together.
Network Protocols The soup du jour is alphabet with a sprig of layered protocol. Fortunately, in many cases you really need only to focus on the definitions rather than what the abbreviations stand for. For the A+ exam, be sure that you know the abbreviations in Table 20-1 and what they are used for. If you need to know what each abbreviation stands for, refer to the IT Essentials v4.0 course. Table 20-1
Network Protocols to Know for the A+ Exam
Protocol
TCP/IP Layer
Need to Know (In Order of Importance)
IP
Internet
Specifies source and destination addressing.
ICMP
Internet
Use the ping command to verify connectivity.
HTTP
Application
Loads web pages.
HTTPS
Application
Loads secure web pages.
HTML
Application
Determines web page layout and content.
FTP
Application
Downloads files and transfers files.
DNS
Application
Translates IP addresses to www.friendly.name.
SMTP
Application
Sends email.
IMAP
Application
Gets email.
POP
Application
Gets email.
TCP
Transport
Is reliable, slower, and supports HTTP, FTP, and SMTP (anything that really needs to be correct on the other end). Connection oriented. continues
90
31 Days Before Your CompTIA A+ Exams
Table 20-1
Network Protocols to Know for the A+ Exam
continued
Protocol
TCP/IP Layer
Need to Know (In Order of Importance)
UDP
Transport
Is unreliable but fast. Used for streaming audio and video and for transmissions that can afford some data loss in lieu of speed. Connectionless.
ARP
Internet
If the IP is known, use this to find the MAC of a nearby network device.
SSH
Application
Is text-based and provides secure remote access to a PC.
Telnet
Application
Old text-based system for remote access. Telnet is unsecure because it sends data in plain text. Use SSH instead.
RIP
Internet
Is a protocol used by routers to choose paths for packets.
IPX/SPX
—
Novell’s alternative to TCP/IP.
VoIP
—
An application that provides voice communication over a network and uses the VoIP protocol.
NetBEUI
—
An enhanced version of NetBIOS that was used by network operating systems like LANManager and Windows NT.
NetBIOS
—
A Microsoft networking protocol that allows communication between computers on a local network.
Standards Organizations Standards organizations work behind the scenes and allow for interoperability among similar devices often made by competing companies. This is why we have common interfaces like universal serial bus (USB) and peripheral component interconnect (PCI). Imagine if there were no standards whatsoever. Everything would be proprietary, and nothing would work with anything else. Note that all these organizations are really quite important. The Internet and computer would be a truly scary place without their standards. The order of importance listed in Table 20-2 has to do with the standards organizations you will most likely see on the A+ exam. Table 20-2
Standards Organizations
Standards Organization
Need to Know (In Order of Importance)
IEEE
Institute of Electrical and Electronics Engineers Ethernet, Token Ring, WiFi
ISO
International Organization for Standardization OSI layered networking model
ANSI
American National Standards Institute FDDI
TIA/EIA
Telecommunications Industry Association/Electronic Industries Alliance Category 5 wire arrangements, called pinouts Modems and faxes
Day 20
91
Ports of Call For the A+ exam, you are expected to know which ports common protocols use. Table 20-3 lists the most common networking protocols, their ports, and a brief description. When manually configuring firewalls, you need to know these. Table 20-3
Ports and Protocols
Protocol
Port
Description
HTTP
80
Basic web surfing
HTTPS
443
Secure web pages
POP
110
Web-based email
IMAP
143
Transfer email from a server to a client
SMTP
25
Email outgoing to a server or between email servers not from server to client
Telnet and SSH
22 or 23
Command-line interface (CLI) remote access
FTP and TFPT
20 or 21
Downloading and uploading files
DNS
53
Friendly URL names
DHCP
67
Autoconfigure network settings
Wire Drill Unshielded twisted pair (UTP) has the basic categories of Category 3 for phones and Category 5 for computer networks. UTP has a catchment area of 100 meters (328 feet), meaning the cables should not exceed this length. TIA/EIA standards allow for 90 m of horizontal run (in the walls and ceilings). This leaves 10 m for patch cables (outside the walls). Patch cables are used to connect devices in a room to the wall jack. There are physical limitations in the walls, access holes, HVAC (heating, venting, and air conditioning), pipes, ducts, lights, fans, and so on. Physical networking is not an easy task. If you need more distance than 100 m, consider connecting a fiberoptic cable to an intermediate distribution facility (IDF). An IDF has its own 50 m Category 5 area it can cover. Fiber-optic cables can be as long as several kilometers. The plenum is the space between a false ceiling and the real ceiling. Wiring in this space should never be PVC. Use plenum rated cable for this area because in a fire PVC creates a deadly poisonous gas and that air is shared throughout the building. So why not just use fiber optic to the desktop? You can, but Category 5 or 5E is cheap, easy to install, and can easily support 10BASE-T and 100BASE-T wiring configurations. As users’ network demands increase (for, among other things, streaming video, gaming, and videoconferencing), we need to support increasing speeds. 1000BASE-T uses all eight wires, and it is advisable to step up the cable to Cat5e, Cat6, or even Cat6A. Cat6 and 6A have more twists to improve protection from crosstalk and line noise.
92
31 Days Before Your CompTIA A+ Exams
Seeing the Light This is what you really need to know about fiber optics as a PC repair technician: Do not bend the cable too much. It is a glass rod and can break. Also, the inside walls of the cable are shiny, to reflect any stray light back into the fiber. The problem is that too much bend can cause the light to shine back at itself. In some situations, this can prevent the light from getting to the end of the wire. The light or laser inside the cable doesn’t look nearly as cool as you might think, and depending on the mode it can be very harmful to your eyes. Even technicians with cabling certifications sometimes inadvertently bend the cable. When that happens, we just go buy a new cable.
File Sharing File sharing uses Network File System (NFS) or Server Message Block (SMB) protocols. SMB is used when sharing files among Windows, Mac, and Linux. The service needs to be first installed, then running, and then the folder must be shared and files must be present. This assumes the network is correctly set up. If not, file sharing is a moot point.
Homework Today offered lots of charts to memorize. Take a break and explore your network. From the command prompt, find the IP address of your PC, the hostname, and the gateway. What is the subnet mask? What class is the address? What is the adapter’s MAC or physical address? Go down the many paths and keep a flowchart of the built-in XP Home and Small Office Network Troubleshooter. To start it, go to Help and Support in the Start menu. Click the Networking and the Web tabs. Click Fixing Networking or Web Problems and then click Home and Small Office. Right before your exam, review the paths. Finally, go back and memorize the networking charts until you know them forward and backward.
Funwork Google “Peter Packet.” Follow the links to the games on the Cisco website. Yes, the very serious Cisco Systems, Inc. has a fun side, too. These games greatly simplify networking concepts and are highly entertaining. Another great resource is a video at http://www.warriorsofthe.net.
Day 20
93
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 8 and 15
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapter 16.
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapters 10, 13, and 14
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapter 18.
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapter 23
This page intentionally left blank
Day 19 Security A+ 220-701 Exam Objectives Objective 5.1: Explain the basic principles of security concepts and technologies Objective 5.2: Summarize the following security features: wireless encryption, malicious software protection, BIOS security
Key Points Security is an entire domain on the CompTIA A+ exam. Today is an easy day (and a little bit fun), but not any less important.
Security Threats Not to sound like a conspiracy theorist, but yes, threats really do exist (threats that you as a technician cannot ignore). Some very smart and motivated people, often called hackers, want to know what you know. They want your company’s payroll information. They want to know your customers’ credit card numbers. Competitors might want to see you spend some quality downtime rebuilding databases and servers, or a neighbor might have a gripe about limited parking and start sending threatening emails from your account, launching denial-of-service (DoS) attacks with your name on them, or stealing your customer records. The problem is, hackers get to attack over and over again until they finally find the weak spot. You have to defend and defend and keep defending because hackers have all the time in the world. Hackers work like this: They send out lots of feelers, spyware, port scanners, or whatever is their preference. They are like wolves preying on a pack of caribou. No wolf will take on a full-grown buck with a rack of antlers, 1200 pounds of hooves’ pressure, and a really bitter attitude. They look for the sick, old, weak, injured, or, as in the case of a network hacker, clueless targets. The attack is quick. The hacker uses the information or more often sells it to the highest bidder. If hackers score big, they might blackmail the company and threaten media exposure. Imagine how much a bank would pay to “buy back” the financial records of its customers. Imagine how short your career would be if that bank were your computer client. Point: Taking security seriously is a career-enhancing move. Table 19-1 lists the basic kinds of attacks and their characteristics.
96
31 Days Before Your CompTIA A+ Exams
Table 19-1
Computer and Network Security Threats
Attack
Characteristics (In Order of Importance)
Denial of service (DoS)
DoS attacks a PC by flooding it with useless requests.
Distributed denial of service (DDoS)
DDoS is a DoS attack run by zombie machines to maximize the effect and make the attack difficult to trace.
Trojan horse
Posing as harmless or even helpful software, a Trojan horse is really doing nasty things behind the scenes, like remotely controlling the target’s PC or reading, modifying, or deleting files. These often come in the form of email attachments or ActiveX, Java, or JavaScript programs.
Worm
Worms are self-replicating software that fill hard drives and modify and spread to others. It is the most “virus”-like attack.
Phishing
This attack gains information from the target by pretending to be a technician or account representative or other trusted person.
Replay attacks
Replay attacks use packet sniffers to find a packet and gather usernames and passwords to be used later. Packet sniffers are a really cool tool for useful information, such as finding out who on your network is doing exactly what.
Spoofing
Spoofing changes the IP address, MAC, or any other identifying marker on a PC to pretend it is someone else.
DNS poisoning
DNS poisoning changes the entries in a Domain Name System (DNS) so that traffic is routed to a malicious site rather than to the legit target. This is especially bad if the malicious site looks and feels like the real target. If it looks like online banking, it must be legit, right?
Brute force
An example of brute force is password cracking by trial and error. Programs run millions of combinations and will happen upon the right combination eventually. The more complicated the password, the longer this process takes. Before they run a proper brute-force attack, password crackers run a dictionary attack. All normal words are compared to the password file, and it takes a matter of seconds to discover an unhardened password this way.
Man-in-the-middle
Taken from a real espionage technique, this type of attack involves a sender, a receiver, and a secret man in the middle. The sender sends a message to the receiver, and the man in the middle intercepts the message. He can then keep the message, or worse yet, forward false or misleading information to the receiver. Suppose you enter a username and password for a website. You get denied. Hmm. You try a different one that you use for other accounts. It doesn’t work, either. You try again with a third password. Perhaps it was the other username. You try all the different usernames you use. The man in the middle now has not just one, but many (perhaps all) of your usernames and passwords.
SYN flood
A SYN flood is a type of DoS attack where the attacker transmits a large number of SYN requests to a system to consume the memory resources of the remote host under attack.
Day 19
97
WiFi Security One of the toughest networks to secure is a WiFi connection. Everyone can hear everything being said. It is like yelling across a room full of people. Even if the message is not intended for everyone, and even if those who can probably will not pay attention to your conversation, you do not need to use this medium to explain personal problems or share credit card information. On the other hand, it is hard to downplay the convenience and ease of use of a WiFi connection. Table 19-2 lists the best WiFi security practices, which you will likely find on the A+ exam. Table 19-2
WiFi Security
Security Technique
Characteristics (In Order of Importance)
Use antivirus (AV) software
This is a must. It allows the computer to have a fighting chance (a bit like white blood cells).
Use an adware-removal application
Ad-Aware is one of the most common applications, and a free version is available. Others include Malwarebytes and Spyware Doctor. Microsoft Security Essentials is built in to Windows, which is a good tool in fighting spyware and viruses.
Update the OS and applications
Service packs and updates are often issued to address holes in security. Use them!
Install a firewall
Hardware firewalls have one in and one out. Traffic entering a network is analyzed by the firewall, which determines whether the traffic is legit. Software firewalls shut down ports except for the ones normally used and assigned to useful applications (such as email, web, and FTP).
Change the default password on the router Username: Admin Password: Admin Admin is the standard and really needs to be changed on your router. Use Wired Equivalency Protocol (WEP) encryption
WEP offers simple encryption and requires a key to be entered when initially connecting to a network. 64 bit is good, but 128 bit is better.
Harden passwords
Harden passwords by using many characters, uppercase and lowercase letters, symbols, and numbers, and by requiring new passwords frequently.
Do not broadcast your SSID
Not broadcasting the service set identifier (SSID) means you will have to manually tell the devices on your WLAN the name of the network (the SSID). Others looking for networks will not see your network at all.
Use Wi-Fi Protected Access (WPA) and WPA2 encryption
WPA offers better encryption than WEP, and WPA2 is the current standard. On a mixed wireless network using B, G, and N standards, for example, verify that the devices using these standards can use the best security utilities. continues
98
31 Days Before Your CompTIA A+ Exams
Table 19-2
WiFi Security
continued
Security Technique
Characteristics (In Order of Importance)
Use MAC filtering
The router issues IP addresses only to recognized MAC addresses. Good, but can be spoofed, and it is difficult to add new users. Not good for dynamic hot spots.
Update the router’s firmware
Vulnerabilities are always being discovered, even in the firmware. Flash the router like you would a BIOS. (Read and follow the manufacturer’s directions.)
Use Lightweight Extensible Authentication Protocol (LEAP) or EAP-Cisco
LEAP, also called EAP-Cisco, is especially good when using Cisco routers and equipment.
Use Wireless Transport Layer Security (WTLS) and Wireless Applications Protocol (WAP)
WTLS and WAP are used on portable devices and are good for narrow-bandwidth conditions.
Antivirus, Spyware Removal, and Definition Updates Do not run two AV applications simultaneously on the same PC. They attack each other’s virus definition files. Do run one AV application, a good one. This is your second line of defense. The first is to keep malware from entering by using firewalls and security-awareness training for users. If a virus gets onto the PC, a good AV analyzes the behavior of every file and watches for anything suspicious. This is called heuristics. The AV software should be set to automatically update its virus definitions and scan the PC at regular intervals. Sophisticated programs run when the system is busy or unattended so that the user is unaware of the reduced performance. Third-party spywareremoval software, like Ad-Aware, works with the AV like a second pair of eyes. Good AV programs from Norton (although quite a resource hog), McAfee, AVG, and Microsoft include integrated spyware-removal tools. It is common to not purchase AV solutions as a standalone product but rather as security suites. A security suite is a software utility that provides a bundled protection service for computers. When you install a security suite, it provides AV, antispyware, firewall, and multiple other features, depending on the product. Security suites available include BitDefender Internet Security, Kaspersky Internet Security, and Webroot Internet Security Essentials.
Firewalls Hardware firewalls act like a gate sentry that analyzes packets as they enter and exit a network. It works alongside the routers and switching equipment. Software firewalls close all network ports on a PC and allow only specific kinds of connections. Those are typically web, downloading, email, and other common connection types.
Day 19
99
User Training and Password Policies Passwords are cracked all the time. If you haven’t learned this skill, you will pick it up sooner or later. A client comes to you with a forgotten password. Is it hacking to break in and recover that data for the customer? Bad guys do this using three methods: ■
By installing a Trojan keystroke monitor
■
By brute force
■
By social engineering
The best thing we can do is harden passwords with numbers, symbols, and capital letters and make them expire so that new ones must be used.
Troubleshooting Security In IT and networking, you need to keep complete and detailed records. Security is no exception. Document what threats exist for your company, and audit the performance and security of your network periodically. Make a use policy and enforce it. If an event occurs, such as a theft or compromised data, document every aspect, even if it makes you look bad. Locking up laptops and other important devices is a good idea. Using biometric devices helps verify exactly who was where and had access to what. Radio frequency identification (RFID) tags can help track devices. Securing the equipment out of reach in server rooms and tamper-resistant screws help thwart unwanted access to the hardware. The BIOS password can be set to prevent changes to the BIOS or access to the computer. This is easily countered by the reset jumper on the motherboard.
Homework Check your security center applet in the Control Panel. If it is all good (firewall: on, auto updates: enabled, AV: present and updated), pat yourself on the back and review the attacks and characteristics table. If not, get busy and download, install, and update an AV application and a spyware remover. Check out Download.com for these utilities.
Funwork In the way that bad guys want to know what you know, you need to know what they know. Go read some bad-guy blogs. Do not post anything there. They use newbies as target practice. Have some fun sleuthing around the dark underbelly of the web. Start with search queries of the different kinds of attacks. Find a trial download keystroke monitor from a reputable site. Download.com is a good place to start. Monitor your own PC. Be legal about this. Some states and provinces have strict guidelines about espionage. Make sure it is you whom you are spying on. If you have never seen this kind of stuff before, it will prove to be a real eye-opening experience. Google the phrases password harvesting or forgotten passwords XP. Could you recover files for a customer using an XP Pro CD? In
100
31 Days Before Your CompTIA A+ Exams
the world of cybersecurity, think like a bad guy and play for the good guys and never suffer from a failure of imagination. The stakes for doing anything else are simply too high.
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapter 9
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapter 10
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapters 19 and 20
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapters 16 and 26
Day 18 Scenario-Based Safety and Environmental Procedures A+ 220-701 Exam Objective Objective 6.1: Outline the purpose of appropriate safety and environmental procedures and given a scenario apply them
Key Points Today you review on-the-job hazards and safety tools all techs need to be aware of. Computers are not very eco-friendly (lead, batteries, PVC, and so on). Both are topics for today.
Hazards What are the safety hazards in your work area? Dangling cords, live electricity, exposed electronics, sharp edges on the cases, and lifting heavy boxes, to name a few. It is not coal mining, but it is still plenty dangerous. Your clothing is a good place to start. Most uniforms for computer repair are polo shirts and khakis and rubber-soled (nonconductive) shoes. This is not just for comfort. Notice there is no conductive silk tie or long sleeves. The clothes are relatively inexpensive, so snags and toner spills are not financially catastrophic. Keep jewelry to a minimum, if not absent. Picture yourself trying to retrieve an earring that has become wedged between the rollers of a laser printer. Name tags can even be a problem. More than one techie has had the horrific experience of a tie or lanyard dragged inside a copier machine. Funny, yes, but also dangerous.
Fire Safety When using a fire extinguisher, remember PASS: ■
Pull the pin. (It takes more force than people realize.)
■
Aim. (A rookie mistake is to aim the spray at the flames, which are above the actual fire. Aim low.)
■
Squeeze the trigger. (Take and hold a big breath first because white powder, soot, ash, and hot cinders will go everywhere. Be ready for that.)
■
Sweep back and forth. (Ideally, start the stream between you and the fire. That way, the propellant pushes the fire away from you.)
102
31 Days Before Your CompTIA A+ Exams
Fire extinguishers are rated by how well they put out different kinds of fires. Because yours is likely to be an electrical fire, the extinguisher should have a high C rating. Table 18-1 describes extinguisher ratings. CO2 extinguishers are ideal for computers. Proper use of the different kinds of fire extinguishers might be worth another trip to YouTube. That said, extinguishers should be held in a vertical position during use. Tilting the canister and then discharging it will release only propellant—not the flame-inhibiting chemical. Table 18-1
Fire Extinguisher Ratings
Rating
Use
Memorization Tips
A
Ordinary combustibles
A as in all (everything, ordinary stuff, paper, wood, carpet, and more).
B
Flammable liquids
B as in bottle. Every technician has a bottle of >70% isopropyl rubbing alcohol for cleaning.
C
Electrical equipment
C as in computers.
D
Combustible metals
D as in degrees. If you have a metal fire, use the extinguisher and then get out immediately. Metal fires rage at thousands of degrees.
Material Safety Data Sheets Material safety data sheets (MSDS) are found online. Inventory your work area and print out the pertinent MSDSs from the Internet. You need an MSDS for every hazardous material on the premises, including seemingly ordinary items, such as cleaners, solvents, and fuels (propane cylinders, heating oil, or natural gas). Have them available for inspections, and if an emergency of some kind occurs, hand them to the incident commander. Blocking door access, covering the fire extinguisher, disabling smoke alarms, and bypassing electricity shutoff are big no-nos. The Occupational Safety and Health Association (OSHA) specifically looks for those sorts of things. They also look for cords along the floor that could create tripping hazards. OSHA inspectors also look for daisy-chained power strips. This is particularly dangerous because you can connect too many devices that draw too much power for the gauge (thickness) of the wire. Too small a wire and or too much current creates resistance and heat, lots of it. This can melt the PVC insulation, which not only creates a poisonous gas but can cause a short between the wires and start a fire. Do not daisy chain power strips of surge protectors.
Tools It is tempting and sometimes wise to limit the number of tools you lug around. After all, you do not need much, really. A Leatherman tool has most of the screwdrivers and pliers you will need. In addition, you should have a multimeter, compressed air, window-cleaning wipes, 70% isopropyl rubbing alcohol and cotton swabs, an antistatic wrist strap and mat, and a CD wallet with a legit copy of all the operating systems that you support. On those OS CDs, you can find utilities and disk management software such as Format, Fdisk, ScanDisk or System File Checker, Defrag, and Disk Cleanup. Other tools you should have are antivirus protection, an adware and spyware
Day 18
103
remover, drivers, service packs, a USB network interface card (NIC) with drivers, a notebook, flashlight, and maybe some specialized test equipment such as a power-supply tester or tools for cable testing and making. It seems like a lot, but you should be able to fit everything in one bag. If you have the luxury of a bench and shop, the sky is the limit for tools. Table 18-2 lists other tools that you might see on the A+ exam. Table 18-2
Less-Common Tools Found on the A+ Exam
Tool
Description
Torx
A star-shaped driver for specialized nuts and bolts.
Hex
A six-sided driver often referred to as an Allen wrench.
Part retriever
A long extension tool used to reach inside of deep, narrow places to retrieve lost parts. Use the finger type (nonmagnetic) around (and especially inside) a PC.
Paint brush
A 1-inch paintbrush useful for cleaning vents and removing dust from hardto-reach places.
Flash drive
A drive that is useful for transferring files and performing quick backups.
Loopback tester (port tester)
A tester that tests ports by wiring the output back to the input. Send a signal and it tests the port.
Electrostatic Discharge Electrostatic discharge (ESD) is a vicious killer of electronics. It can strike silently, and you will not even know how or when it happened. It is caused when you and the equipment have different voltages, which is almost always. We pick up and lose electrons as we walk around and touch things. Cool and dry environments like those found in repair shops make ESD more prone to occur. Always, always touch the metal chassis before you touch anything else inside the PC. Making a connection with the electrical ground neutralizes static electricity. An antistatic wrist strap maintains that connection for the duration of your work. Antistatic mats create a static-free work area ideal for repairing electronics. You might want to invest in an antistatic mat to carry in your tool kit when working on computers away from your work area. It will also protect the customer’s table top, where you might be working.
Disposing of Computer Components Batteries must be taken to a collection center for recycling; you cannot legally just throw them away. Check your local government guidelines for specific locations. And because computers contain all kinds of potentially hazardous chemicals and metals, they, too, need to be disposed of properly or recycled. If your company is fined for failing to properly dispose of waste, your boss will want to know what steps you have taken to educate the employees about this. You need to have a good answer. Further, this is another great reason to keep detailed notes. Many local recycling businesses (check your area) accept computer components.
104
31 Days Before Your CompTIA A+ Exams
Homework ■
Walk through your place of business or home and make a list of hazardous materials.
■
Download the MSDSs from the web and impress your employer.
■
Establish a specific place where batteries can be stored until properly disposed of. Many can be recycled; none can legally be thrown away with the “regular” trash.
■
Check the blogs and forums to determine which tools you need and do not be shy about asking what utilities other people use. Those are the real tools.
Funwork Spend some Google time on IT and the environment. Is it really greener to store something on a computer than on paper? How are computers recycled?
Study Resources For today’s exam topics, refer to the following resources for more study: ■
Cisco Networking Academy Curriculum. Chapters 2 and 10
■
CompTIA A+ Cert Guide by Mark Edward Soper, Scott William Mueller, and David L. Prowse. Chapter 17
■
The Complete A+ Guide to PC Repair by Cheryl Ann Schmidt. Chapter 4
■
The Comprehensive Guide to Managing and Maintaining Your PC by Jean Andrews. Chapter 3
■
All-in-One CompTIA Certification Exam Guide, Seventh Edition by Mike Meyers. Chapter 2
Day 17 Scenario-Based Communication and Professionalism A+ 220-701 Exam Objective Objective 6.2: Given a scenario, demonstrate the appropriate use of communication skills and professionalism in the workplace
Key Points Today is more about your relationship with customers. And yes, it is a relationship. If you’re reading this, you know how to speak geek. If you learn how to speak “customer” as well as you speak “geek,” you will go far in this field.
Customer Support Think about the times you have called a customer support number. How long were you kept waiting to speak to someone? When you finally did reach a human, was it easy to speak with the person, or did that person have difficulty communicating with you? Regardless of accent or language barriers, did he or she use terms you didn’t understand? Did the customer service personnel take the time to explain those terms? Did they interrupt you to finish your sentence for you, or hurriedly arrive at a conclusion, disregarding your input? Did they ever use your name, besides perhaps just the one time at the beginning of the conversation? Now you’re providing customer support. If your loved one called you for technical help, you would not make those kinds of mistakes. In fact, those kinds of mistakes would be disrespectful. Remember that the person who calls you for help is somebody’s loved one. They’re your boss. They’re your colleagues. They’re your family, friends, and your neighbors. If they called from somewhere foreign to you, from a place you perhaps cannot even pronounce, they’re still all of these things. Treat them as such. If language or accents prevent effective communication, consider online live chat or texting. Customers do not speak geek. You do. Sometimes other techies call tech support and you can speak in your shared language, but that is not usually the case. Generally, it is a perfectly intelligent person who is unfamiliar with a new thing. What if you were to trade places with an auto mechanic or a cosmetologist for a day? Would you have a bunch of “dumb” questions? Imagine how lost you would be if those around you in your new field communicated only in jargon and acronyms and referred to common knowledge (uncommon to you).
106
31 Days Before Your CompTIA A+ Exams
Realize the role you have. You have the answers, they have questions and the money. Further, they know other people with both questions and money. Work together, clarify, simplify, and be professional. If you do so, you will soon be known as the computer go-to person. And for heaven’s sakes do not lose or break customer property or data. NOTE: It is important to remember the troubleshooting model when working with customers. Know the difference between open-ended and closed-ended questions.
Service Level Agreements It is hard to quantify exactly what good customer service is. One technique is a service level agreement (SLA). It is a description of exactly what the customer can expect from you, which specific equipment you will support and for how long, costs, diagnostics, preventive maintenance, and penalties for failing to adhere to these descriptions.
Professional Advice Make sure you’re well versed in the current IT debates. People make big-ticket purchases based on your opinion, so make certain that your judgments are factually based and not based on opinion, ad campaigns, and PR. Mac or PC? New or refurbished? AMD or Intel? Verizon or Comcast? iPhone or BlackBerry? Which cloud-based backup product should I use? Xbox, PlayStation, or gaming PC? Which web-hosting company should I use? Should I buy a service plan? Can I trust Wikipedia’s accuracy in tech-related subjects? The answer to all of these questions starts with, “Well, it depends.” Be able to finish those answers factually. Your friend’s, company’s, family’s money and your reputation are on the line when you advise others about how to spend money. Always keep in mind what the end user will do with technology. If you’re recommending a laptop for grandma and all she will do is email and use Excel to balance her checkbook, she does not need an extremely powerful system.
Difficult Scenarios You’re almost guaranteed to have difficult conversations with some customers. If a computer is full of malware because of many visits to naughty sites online, use good judgment when interacting with the customer. Quietly, privately, explain what happened and stress the importance of updated antivirus, deleting temporary Internet files, histories, in-private browsing, and virtual machines. Many malware and virus programs and current browser configurations can check the safety of websites. What about illegally downloaded music and movies or pirated software? Regardless of your feelings about this topic, you should report it to your supervisor or law enforcement, depending on the seriousness. An illegal copy of a yoga video is different from bomb-making plans. Understand the difference between immoral and illegal. They aren’t the same. The former is none of your business. The latter is about protecting your career. Besides, there might be a perfectly good reason to research bomb making. Imagine what Tom Clancy’s Internet search history looks like.
Day 17
107
What if you suspect that your customer is involved in espionage or otherwise has ill intent toward the government, ethnic groups, or children, or maintains any other profoundly stupid ideas? That is when you should report it to http://www.fbi.gov/contact-us/contact-us. Seriously, because if you do not, and your customer does something stupid later, do you want to explain to them why you chose not to mention it and could have prevented a terrorist attack, hate crime, or child abduction? In a worst-case scenario, you might be an accessory. You did fix their computer, right? If you’re concerned about anonymity, use a friend or use me. Yours would not be the first encrypted email attachment, anonymous flash drive, or old-school written letter to arrive in my mailbox. While on the topic of trust, newbies make great scapegoats. Do not be one. If something happens at your job that might lead to an internal or legal investigation, write everything down, immediately: times, date, places, people, even what you ate for lunch and what you were wearing, everything. If necessary, retain a lawyer. Imagine how challenging your budding computer career will be if you’re thought of as untrustworthy. The day will come when you manage email servers, online commerce cites, and handle proprietary or secret information. You’re on a career path, but it is a dead end if you cannot be trusted. Although you may know how to “get around” validating software or using pirated copies of software (and you shouldn’t), do not share that with work-related personnel or customers. Your customers are allowing you unrestricted access to their computers and all the data they contain. Although it might be necessary for you to navigate through the PC’s directory structure, it is important that you do not look at any of their personal or professional information. Your relationship with your customers is based on trust, and no matter how technically proficient you might be, if you break a customer’s trust, you will not be successful in this business.
A Geekspeak Translation Guide The field technician interacts with the public. Often, customers attempt to do something, fail, call you, and then want to stand around and learn. This is an opportunity to be annoyed or to make a friend. Your choice. When talking to curious spectators, be sure to use their language, not ours. Remember that you need to tailor your language to match their level of understanding. If the customer took Geekspeak 101 but didn’t major in it, you can use that to your advantage. It is a huge compliment to the DIY-ers when you use some technical terms but not so many that it overwhelms them. Here’s an example of how to speak customer. Geekspeak: The unknowledgeable customer put an HDD in the computer and could not find it in the BIOS. The jumper on the new drive was not set correctly on the PATA HDD. The old one is still master, and the new one is set for CS. I needed to change them both to CS and plug the new HDD in the end to make it master. Now you are able to see both in the BIOS. Translation for the customer: Whoever put this hard drive in the PC did a good job. However, it wasn’t quite configured properly. A small matter of jumpers and cables fixed the problem, and now you can see it in the BIOS. Do you have any questions?
108
31 Days Before Your CompTIA A+ Exams
Notice the use of positives and the effort to minimize the problem. A quick explan