57
Advances in Biochemical Engineering Biotechnology Managing Editor: T. Scheper
Springer Berlin Heidelberg New York Barcelona Budapest Hong Kong London Milan Paris San ta Clara Singapore Tokyo
Biotechnolgy in the Pulp and Paper Industr~Y Volume Editor: K.-E. L. Eriksson
With Contributions by M. Akhtar, D.S. Argyropoulos, P. Bajpai, P. K. Bajpai, R. A. Blanchette, J. Buchert, J. F. D. Dean, K.-E. L. Eriksson, R. L. Farrell, M. Guenette, K. Hata, S. C. Johnsrud, T. K. Kirk, R. C. Kuhad, P. R. LaFayette, S. B. Menachem, S. A. Merkle, A. Singh, A. Suurn~ikki, M. Tenkanen, J. S. Tolan, L. Viikari, M. B. Wall
With 41 Figures and 52 Tables
Springer
ISSN 0724-6145 ISBN3-540-61868-6 Springer-Verlag Berlin Heidelberg NewYork
Library of Congress Catalog Card Number 72-152360 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, re-use of illustrations, recitation, broadcasting, reproduction on microfilms or in other ways, and storage in data banks. Duplication of this publication or parts thereof is only permitted under the provisions of the German Copyright Law o f September 9,1965, in its current version, and a copyright fee must always be paid. Springer-Verlag Berlin Heidelberg 1997 Printed in Germany The use of registered names, trademarks, etc. in this publication does not imply, even in the absence o f a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Typesetting: Macmillan India Ltd., Bangalore-25 SPIN: 10550104 02/3020 - 5 4 3 2 1 0 - Printed on acid-free paper
Managing Editor Professor Dr. T. Scheper Institute of Technical Chemistry, University of Hannover Callinstral3e 3, D - 30167 Hannover, FRG Volume Editor Professor Dr. K.-E. L. Eriksson Center for Biological Resource Recovery, The University of Georgia, A214 Life Sciences Building, Athens, GA 3 0602-7229/USA
Editorial Board Prof. Dr. W. Babel
Center of Environmental Research Leipzig-Halle GmbH Section of EnvironmentalMicrobiology PeermoserstraBe 15 D - 04318 Leipzig/FRG
Prof. Dr./4~ W. Blanch
University of California Department of Chemical Engineering Berkely, CA 94720-9989/USA
Prof. Dr. Ch. L. Cooney
Massachusetts Institute of Technology Department of Chemical Engineering 25 Ames Street Cambridge, MA 02139/USA
Prof. Dr. S.-O. Enfors
Department of Biochemistry and Biotechnology Royal Institute of Technology Teknikringen 34, S - 100 44 Stockholm/Sweden
Prof. Dr. K.-E. L. Eriksson Center for Biological Resource Recovery The University of Georgia A214 Life Sciences Building Athens, GA 30602-7229/USA Prof. Dr. A. Fiechter
Institute of Biotechnology EidgenOssische Technische Hochschule ETH-HOnggerberg,CH-8093 Ztirich/Switzerland
Prof. Dr. A. Iv[ Klibanov Massachusetts Institute of Technology Department of Chemistry Cambridge, MA 02139/USA Prof. Dr. B. Mattiasson
Department of Biotechnology Chemical Center, Lund University P.O. Box 124, S -221 00 Lund/Sweden
Prof. Dr. S. B. Primrose
21 Amersham Road
High Wycombe, Bucks HP13 6QS/UK
VI
Editorial Board
Prof. Dr. H. d. Rehm
Westf'alische Wilhelms Universit/it Institute of Microbiology Corrensstr. 3, D - 48149 Miinster/FRG
Prof. Dr. P. L. Rogers
Department of Biotechnology Faculty of Applied Science The University of New South Wales Sydney2052/Australia
Prof. Dr. H. Sahm
Institute of Biotechnology ForschungszentrumJiilich GmbH D - 52428 Jtilich/FRG
Prof. Dr. K. Schi~gerl
Institute of Technical Chemistry University of Hannover Callinstr. 3, D - 30167 Hannover/FRG
Prof. Dr. G. T. Tsao
Director, Lab. of Renewable Resources Eng. A. A. Potter Eng. Center, Purdue University West Lafayette, IN 47907/USA
Prof. Dr. K. Venkat
Phyton Inc., 125 Langmuir Lab. 95 Brown Road, Ithaca, NY 14850-1257/USA
Prof. Dr. John Villadsen
Department of Biotechnology Technical University of Denmark Bygning223, DK-2800 Lyngby/Denmark
Prof. Dr. U. yon Stockar
Swiss Federal Institute of Technology Lausanne Institut de G6nie Chimique CH- 1015 Lausanne/Switzerland
Prof. Dr. C. Wandrey
Institute of Biotechnology Forschungszentrum Jtilich GmbH P.O.Box 1913, D - 52428 Jtilich/FRG
Preface
One of natures most important biological processes is the conversion of wood and other lignocellulosis to carbon dioxide, water and humic substances. Biotechnology, by definition, is the technical utilization of biological reactions. Since wood and other lignocellulosics constitute the raw material for the forest industries there should be ample opportunity for biotechnology in manipulating these resources. There are, however, difficulties for implementation o f such technologies in this industry. While biotechnology in areas like medicine and pharmacology concerns production o f expensive products on a small scale, biotechnical utilization and conversions of lignocellulosics means production of inexpensive products on a large scale. Biotechnological utilization of lignocellulosic materials is therefore a very difficult task, and the commercial utilization of this technology has, therefore, only recently gained momentum. One reason for this was the lack of basic knowledge about enzyme mechanisms involved in the degradation and conversion of wood, other lignocellulosics and their individual components. However, the worldwide efforts devoted over the past few decades to research for a better understanding of these mechanisms now provide a solid base for successful development of biotechnology for the pulp and paper industry. For those deeply involved in these investigations, it is obvious that the investments have been a dazzling success. This issue of Advances in Biochemical Engineering/Biotechnology presents, in great detail, recent findings about microorganisms and their enzymes involved in the degradation of wood and wood components, cellulose, the hemicelluloses and lignins. The issue covers not only biotechnology in the pulp and paper industry, but also in forestry. The chapter on Forest Tree Biotechnology demonstrates how trees, unlike such inanimate resources as metallic ores, have the potential to be modified genetically, essentially transforming lead into gold. The new methodologies being used to address problems in forest biotechnology are described with respect to their potential impact on forest tree improvement. A whole chapter is devoted to ,,Lignin", it's role in wood, it's biosynthesis and structure as well as methods for it's analysis. The chapter on the use of white-rot fungi for a specific delignification of wood chips, i.e .... Biomechanical Pulping" describes how this technique is now being run in pilot plant scale and how it approaches commercialization. Pitch problems in pulping processes are addressed with respect to how they can be minimized by the use of enzymes or fungi. The technique for how to do this is described in great depth.
VIII
Preface
No less than three chapters are devoted to pulp bleaching. One is concerned with purification of effluents containing organochlorine compounds using biotechnology. Two other chapters are devoted to the use of hemicellulases for bleaching, one of which describes the basic research in this area, while the other presents results from the use of enzymes in the pulp mills. The last chapter focuses on biotechnology to solve slime problems caused by microorganisms growing in the water systems of pulp and paper mills. It is inevitabte that there will be an increasing need for closing of these systems, thus there will likely be increasing slime problems in these systems in the future. These papers convey the current and developing applications ofbiotechnology in the pulp and paper industry. Wherever possible, the authors have attempted to peer into their crystall balls to see what lies ahead. However, the age of biotechnology is only just dawning, but I have no doubt that surprises that lie yet ahead for us will only serve to further enthuse this field of research. September, 1996
Karl-Erik L. Eriksson
Table of Contents
Forest Tree Biotechnology J. F. D. Dean, P. R. LaFayette, K-E. L. Eriksson, S. A. Merkle. Microorganisms and Enzymes Involved in the Degradation of Plant Fiber Cell Walls R. C. Kuhad, A. Singh, K.-E. L. Eriksson . . . . . . . . . . . . . . . . . . Lignin D.S. Argyropoulos, S.B. Menachem . . . . . . . . . . . . . . . . . . . . . .
1
45
127
Fungal Delignification and Biomechanical Pulping of Wood M. Akhtar, R. A. Blanchette, T. K. Kirk . . . . . . . . . . . . . . . . . 159 Solving Pitch Problems in Pulp and Paper Processes by the Use of Enzymes or Fungi R. L. Farrell, K. Hata, M. B. Wall . . . . . . . . . . . . . . . . . . . . . . . .
197
Reduction of Organochlorine Compounds in Bleach Plant Effluents P. Bajpai, P. K. Bajpai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
213
Hemicellulases in the Bleaching of Chemical Pulps A. Suurn~ikki, M. Tenkanen, J. Buchert, L. Viikari . . . . . . . . . . .
261
Using Enzymes in Pulp Bleaching: Mill Applications J. S. Tolan, M. Guenette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
289
Biotechnology for Solving Slime Problems in the Pulp and Paper Industry S. C. Johnsrud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
311
Author Index Volumes 51 - 57 . . . . . . . . . . . . . . . . . . . . . . . . .
329
Subject Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
333
Attention all "Enzyme Handbook" Users:
A file with the complete volume indexes Vols. 1 through 11 in delimited ASCII format is available for downloading at no charge from the Springer EARN mailbox. Delimited ASCII format can be imported into most databanks. The file has been compressed using the popular shareware program "PKZIP" (Trademark of PKware INc., PKZIP is available from most BBS and shareware distributors). This file distributed without any expressed or implied warranty. To receive this file send an e-mail message to: SV
[email protected]. The message must be: "GET/ENZHB/ENZ_HB.ZIP". SPSERV is an automatic data distribution system. It responds to your message. The following commands are available: HELP DIR (name) INDEX (name) CD
SEND GET
returns a detailed instruction set for the use of SVSERV, returns a list of files available in the directory "name", same as "DIR" changes to directory "name", invokes a message with the file "filename" same as "SEND".
Forest Tree Biotechnology Jeffrey F.D. Dean 1, Peter R. LaFayette 2, Karl-Erik L. Eriksson z, and Scott A. Merkle 1 Daniel B. Warnell School of Forest Resources and Department of Biochemistry and Molecular Biology, University of Georgia, Athens, GA-30602, USA
List of S y m b o l s a n d A b b r e v i a t i o n s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The C h a l l e n g e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............... 2 Key P r o b l e m s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 W o o d and P a p e r P r o d u c t s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Breeding a n d Life-Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 M a n - M a d e a n d E n v i r o n m e n t a l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Propagation ............................................. 3.1 Cell a n d Tissue C u l t u r e of F o r e s t Trees . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 In V i t r o P r o p a g a t i o n T e c h n i q u e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 A x i l l a r y S h o o t M u l t i p l i c a t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.40rganogenesis ......................................... 3.5 S o m a t i c E m b r y o g e n e s i s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 P r o t o p l a s t C u l t u r e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 In Vitro Screening a n d S o m a c l o n a l V a r i a t i o n . . . . . . . . . . . . . . . . . . . . . . . 3.8 C r y o p r e s e r v a t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9 Artificial Seeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Genetic Engineering ........................................ 4.1 Tissue C u l t u r e C o n s i d e r a t i o n s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Biological G e n e Transfer ( A g r o b a c t e r i a - M e d i a t e d T r a n s f o r m a t i o n ) . . . . . . . . . . 4.3 Physical G e n e Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.1 T r a n s f o r m a t i o n by Microprojecti,~e B o m b a r d m e n t . . . . . . . . . . . . . . . . 4.3.2 T r a n s f o r m a t i o n of P r o t o p l a s t s . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.3 A l t e r n a t i v e T r a n s f o r m a t i o n T e c h n i q u e s . . . . . . . . . . . . . . . . . . . . . . . 4.4 Selection Systems, P r o m o t e r s , a n d R e g u l a t o r y E l e m e n t s . . . . . . . . . . . . . . . . 4.5 C u r r e n t a n d F u t u r e T a r g e t s for G e n e t i c E n g i n e e r i n g in F o r e s t Trees . . . . . . . . . 4.5.1 L i g n i n C o n t e n t a n d C o m p o s i t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.2 Sterility a n d E a r l y F l o w e r i n g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.3 H e r b i c i d e Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.4 Insect a n d P a t h o g e n Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.5 Tree F o r m a n d F i b e r M o r p h o l o g y ......................... 4.5.6 N o v e l T r a i t s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 R e g u l a t o r y C o n s i d e r a t i o n s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 M o l e c u l a r Breeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 D N A M a r k e r T e c h n i q u e s .................................. 5.1.1 R e s t r i c t i o n F r a g m e n t L e n g t h P o l y m o r p h i s m ( R F L P ) .............. 5.1.2 R a n d o m Amplified P o l y m o r p h i c D N A ( R A P D ) . . . . . . . . . . . . . . . . . . 5.1.3 B u l k e d Segregant Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.4 M i c r o s a t e l l i t e R e p e a t P o l y m o r p h i s m s . . . . . . . . . . . . . . . . . . . . . . . . 5.1.5 Amplified F r a g m e n t L e n g t h P o l y m o r p h i s m s ( A F L P ) . . . . . . . . . . . . . . . 5.1.6 Microsatellite H y b r i d i z a t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 A p p l i c a t i o n s of D N A M a r k e r s in F o r e s t R e s e a r c h . . . . . . . . . . . . . . . . . . . . 5.2.1 G e n e t i c L i n k a g e M a p s ................................ 5.2.2 M a p p i n g Projects ................................... 5.2.3 M a r k e r - A s s i s t e d Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 4 4 4 6 7 7 7 8 9 10 11 13 14 14 14 15 16 17 20 20 21 21 22 23 23 24 25 25 26 26 26 27 28 28 28 29 29 30 30 31 31 32 32
Advances in Biochemical Engineering/ Biotechnology, Vol. 57 Managing Editor: T. Scheper 9 Springer-Verlag Berlin Heidelberg 1997
2 5.3 Other Applications of D N A Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1 Quantification of Genetic Diversity . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2 Genotype Verification and Delineation . . . . . . . . . . . . . . . . . . . . . . . 6 Electronic and Computational Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Jeffrey F.D. Dean et al. 34 34 34 35 36 37
The forest products industry has traditionally viewed trees as merely a raw, and more or less immutable, natural resource. However, unlike such inanimate resources as metallic ores, trees have the potential to be modified genetically, essentially transmuting lead into gold. Increasingly, m o d e r n alchemists are applying the tools of biotechnology in efforts to reduce the biological constraints on forest productivity. Several new methodologies being used to address problems in forest biology are described with respect to their potential impact on forest tree improvement. In addition to addressing problems inherent to the current use of trees for production of pulp and paper or solid wood products, genetic manipulation of trees brings with it the potential to create new industries based on the novel characteristics of transgenic trees, e.g. trees containing transgenes to detoxify specific pollutants could be used in the remediation of sites contaminated with hazardous wastes. Efforts to modify trees through biotechnology are in their infancy, and this review seeks to outline the underpinnings of what will undoubtedly be an area of increased emphasis in the next millennium.
Forest TreeBiotechnology
List of Symbols and Abbreviations Symbol 2,4-D AFLP BAP Bt CAD CaMV CAT EPSP F5H GFP GUS IAA NAA OMT PCR PEG QTL RAPD RFLP STFI vir
Description 2,4-dichlorophenoxyacetic acid amplified fragment length polymorphism benzylaminopurine Bacillus thuringiensis endotoxin cinnamyl alcohol dehydrogenase cauliflower mosaic virus chloramphenicol acetyltransferase 5-enolpyruvylshikimate-3-phosphate ferulate-5-hydroxylase green fluorescent protein [3-glucuronidase indoleacetic acid naphthylacetic acid o-methyltransferase polymerase chain reaction polyethylene glycol quantitative trait locus random amplified polymorphic DNA restriction fragment length polymorphism Swedish Pulp and Paper Research Institute a class of genes controlling the virulence of Agrobacterium tumefaciens
4
Jeffrey F.D. Dean et al.
1 The Challenge Since the advent of agriculture, one of the principal challenges for mankind has been to increase the ability of plants to capture incoming solar energy for the production of food, fuel, and fibers. As the human population continues to burgeon, it becomes clear that the demand for increased production efficiency in crops and trees will not diminish. While the most significant advances of the "green revolution" have resulted in a doubling and tripling of yields from agronomic crops, the potential for increasing forest productivity, for instance through reduced rotation times, could be much greater given the minuscule effort to date in applying the techniques of modern biotechnology to potentials in forest tree biology. The increasing use of plant polysaccharides for the production of fuel-grade ethanol is one example suggesting that the future products derived from forest trees may not remain just paper and timber. Thus, new products derived from wood also have the potential to drive demand for greater forest productivity. However, the greatest pressure for increased tree productivity is likely to result from preservation efforts that remove forests on public lands from the role of harvestable inventory. Regardless of corporate sentiment, current trends in this area are unlikely to be reversed, and, as a consequence, plantation forestry is likely to become a major production paradigm for the next century. Tree productivity will need to be increased significantly if we are to have any chance at meeting projected fiber demands using the diminished acreage allotted to production forestry. Forestry has never faced challenges as great as those before it now. In some parts of the world misguided land use policies have led to extensive deforestation, while, elsewhere, productivity has stagnated due to the detrimental effects of environmental pollutants such as acid rain. Population growth in every corner of the globe increases pressure to produce more fodder and fuel wood. In the past, answers to these complex issues usually centered on social, political, or economic redress, and such is likely to remain the case for the near future. However, plant biotechnology has advanced to a point where we can now envisage biological solutions to some of the more intractable forestry problems. This chapter is intended to convey the optimism that currently pervades this field by highlighting a few of the most exciting areas in which biotechnology is being applied to problems of forest biology.
2 Key Problems 2.1 Wood and Paper Products The term "wood quality" is often used to describe the overall suitability of a particular wood source for a specific end use. Thus, wood considered to be of
Forest Tree Biotechnology
5
excellent quality for one type of product may be useless for another application and vice versa. For example, spruce fibers generally tend to have thinner walls than those from pine, and, as a result, spruce pulps form more compact and denser sheets of paper. Similarly, softwood fibers, which are always longer than hardwood fibers, increase the tear strength index of paper, but the tight packing of short hardwood fibers yields a smoother, more uniform writing surface. Solid wood products are dependent on a completely different set of parameters to define wood quality. Zobel and Van Buijtenen [1] have reviewed the ways in which variations in wood properties influence the quality of wood and paper products, while Karenlampi [-2] has discussed the role of fiber properties in product quality. Wood quality is a function of the morphology and chemistry of all the various cell types and the ratio of their occurrence in a particular species of tree. Thus, wood quality is constrained by the genetics, age, environmental conditions, and cultivation practices imposed on the individual tree. G r o w t h conditions can significantly alter such cellular parameters as fiber volume and morphology as well as cell wall architecture and chemistry. Cell walls are actually a composite material, and their ultrastructure thus derives from the ways in which the various molecular components are arranged and oriented to form the fiber wall. In general, embedded cellulose microfibrils give the walls tensile strength, while the surrounding matrix of hemicelluloses and lignin bind and rigidities the composite. Lignin also serves to hold the individual fiber cells together. The carbohydrate components, i.e. cellulose and hemicelluloses, are hydrophilic materials, while lignin is hydrophobic, and the relative proportions of these two classes of material in a given fiber wall define many of the bulk properties of the fiber. Structural features of importance for paper production include fiber length, diameter, wall thickness and ultrastructure. Softwood fibers used in pulp production can have a mean length anywhere from 2.5 mm to more than 10 mm; however, the majority of softwoods have an average fiber length of 3-5 mm. Most softwood pulp fibers have a diameter of less than 0.1 ram. Hardwood fibers are, on the average, about 1/3 the length and about 1/2 the width of softwood fibers. It seems likely that the fibers used for paper manufacturing in the future will increasingly come from plantations of fast-growing trees where juvenile fibers will predominate [3]. It is relatively easy to predict the effect this will have on products made with hardwood fibers since the morphology and chemistry of juvenile fibers of hardwoods are more similar to mature fibers than is the case for softwood fibers [4, 5]. However, juvenile softwood fibers are significantly shorter and weaker than mature fibers, and, as a consequence, they do not have the superior strength characteristics needed for making strong paper using current technology. Thus, the long fibers currently obtained from mature temperate softwoods may well become a limiting factor for future paper production. There is currently a fundamental lack of knowledge about the relationship between fiber quality and pulp product properties. One reason for this is that the
6
JeffreyF.D. Dean et al.
parameters which are used to characterize the fibers at different steps in the processing chain are non-uniform. Foresters describe wood quality with respect to tree growth and density, pulp makers focus on measurements of viscosity and kappa number, while papermakers test freeness and handsheet properties. All of these players are looking at the bulk properties of fiber mixtures, but no one has studied purified, uniform fiber preparations in sufficient detail to explain how individual fiber types might influence the bulk properties of the mixture. An understanding of individual fiber properties should make it possible to model how different combinations of fiber mixtures might improve paper processing. To collect such information on fiber mixtures, the Swedish Pulp and Paper Research Institute (STFI) has developed a measurement system called STFI Fiber Master. This equipment can rapidly determine fiber form, length, width, and flexibility for more than 1000 particles per second in a diluted fiber suspension. When combined with information on the chemistry and binding parameters for the fibers, this new analytical tool provides a powerful technique for optimizing fiber mixtures to suit the production of a particular product.
2.2 Breeding and Life-Cycle Although they have been exploited by man for millennia, forest trees constitute one of the last major plant groups that has not been subjected to significant genetic manipulation with an eye toward improvement. The reason for the lack of progress with forest trees compared to agronomic and horticultural species can be attributed to the fact that these plants are characterized by a number of unique biological features which have made their breeding a slow and difficult process. The most obvious of these is the relatively large size of tress of reproductive age, which makes controlled breeding in the greenhouse difficult. However, two facets of their long life histories currently present major barriers to rapid improvement of trees via traditional breeding: (1) the long lag period between seed germination and flower production, and (2) the lengthy interval between seedling and mature phenotype. Average time to flower production varies greatly among species, from as short as 5 years for some species of Pinus to as long as 25 years for some species of Quercus [6] Consequently, the tree breeder may have to wait more than two decades between breeding cycles. Furthermore, the major traits for which improvement is desired, such as volume, wood specific gravity, and form or growth habit, usually cannot be assessed until the tree assumes its mature phenotype, perhaps 20-30 years from the seedling stage. Attempts to predict mature tree performance from that of seedlings has so far met with limited success [e.g. 7, 8]. To make matters worse, many of these desirable traits are not inherited in a simple fashion, but instead result from complex interactions of genes at multiple loci. As a consequence, improvement of quantitative traits requires breeding programs designed to make incremental advances in a population mean for a desired trait using such tools as mass selection. While this approach has led to measurable improvement in some
Forest Tree Biotechnology
7
commercial tree species such as Pinus taeda [9], these gains have required massive cooperative efforts over multiple decades. For the majority of trees, traditional breeding approaches are simply not a realistic means for achieving genetic improvement.
2.3 Man-Made and Environmental In addition to the natural constraints that limit forest tree productivity, man has added new problems as a consequence of population growth and industrialization. One of these problems is pollution of the soil, air and water. While some forest trees seem able to tolerate high levels of air pollution, surviving well, for example, in urban environments, others are severely damaged by high levels of pollutants such as ozone. Unless we are satisfied with being limited to a few species of trees for growth in polluted areas, trees that currently cannot survive airborne toxins will have to be engineered to tolerate certain levels of these pollutants. Population growth in some countries has led to increasing competition for land. For example, in the south eastern United States, old agricultural fields were once plentiful enough to be employed for pine plantation forestry. Today, with the growth of cities and suburbs, these lands are no longer available for agriculture, let alone forestry. Thus, forests will probably have to be planted on lands that are less than optimal with regard to fertility and water availability. In these cases, we will need trees that are specifically adapted for growth on sites where trees available today would be unable to survive. An extreme case might be the need to produce populations of trees adapted to growing on sites which are unsuitable for any other use, such as those contaminated by heavy metal residues.
3 Propagation 3.1 Cell and Tissue Culture o f Forest Trees The goal most often cited for in vitro culture of forest trees is propagation. As with conventional vegetative propagation (macropropagation) techniques such as rooted cuttings, the primary objective of in vitro propagation (micropropagation) is to capture the total genetic superiority of the parent material, including both additive and nonadditive genetic components. In addition, clonal propagation systems allow the application of a very high selection differential, since whole new populations of plants can be cloned from just a few elite individuals. Theoretically, since somatic tissues are used as the starting material, each tree regenerated from these tissues should be an exact clonal copy of the ortet. The ideal result should therefore be a highly uniform clonal population that
8
Jeffrey F.D. Dean et al.
replicates the phenotype of the source tree. However, unlike macropropagation systems, some in vitro propagation methods have the potential to introduce significant new genetic or epigenetic changes into propagules regenerated from them, so that the parent material is not truly replicated (see section on somaclonal variation). Furthermore, the nature of much in vitro propagation technology for forest species excludes clonal propagation of proven genotypes, since many of these systems are limited to employing explants from juvenile genetically unproven material. A second principal goal of micropropagation that parallels conventional vegetative propagation is simply to mass propagate plants, bypassing sexual reproduction, which for a particular species may be too expensive, inefficient or impractical. In vitro propagation can also be used to overcome problems associated with macropropagation, including limitations on available parent material or space. In addition, just as propagation through seeds may be limited by biological factors, certain species or even individual genotypes may be recalcitrant to conventional vegetative propagation techniques such as rooting of stem cuttings. In these cases, in vitro techniques may succeed where macropropagation fails. In addition to the advantages shared with conventional vegetative propagation, in vitro culture has a number of associated potential and real applications that are unique. These include protoplast culture and fusion for generation of somatic hybrids, in vitro screening, generation of useful somaclonal variants, generation of artificial seeds, and long-term storage of germplasm using cryopreservation. Finally, in vitro culture currently provides the only route for generation of genetically engineered genotypes of forest trees. Gene transfer technologies including Aorobacterium-Ti plasmid mediated gene transfer, electroporation, microinjection, and microprojectile bombardment all depend on the ability to culture cells in vitro in order to select the transformed cells, usually by employing drug-resistance marker genes. Once transformed cells are obtained, these can be cultured to regenerate transformed plantlets (see section 4.2 on gene transfer).
3.2 In Vitro P r o p a g a t i o n T e c h n i q u e s
Micropropagation systems fall into three broad categories: axillary shoot (or bud) multiplication, organogenesis, and somatic embryogenesis. Axillary shoot methods rely on multiplication of preformed structures, while organogenesis and somatic embryogenesis rely on de novo generation of either plant organs or embryos, respectively (i.e. morphogenesis). All these regeneration systems have great potential to be applied for mass propagation of forest tree species. As the examples below show, the success of a given method appears to be highly species-specific, with shoot multiplication or organogenic systems working well for some species, while embryogenic systems are clearly superior for others.
Forest Tree Biotechnology
9
Forest trees were among the first plants cultured in vitro. Gautheret [10] reported formation of adventitious buds in cultured cambial explants of Ulmus campestris, demonstrating that an exogenous source of sugar was required for bud production, while high levels of indoleacetic acid (IAA) in the medium inhibited bud formation. Jacquiot [11] extended the research with this species, using trees up to 180 years old as tissue sources. Mathes [12] reported in vitro production of both roots and shoots in callus cultures of Populus tremuloides, although apparently no plantlets were produced. It was not until four years later that Wolter [13] produced entire P. tremuloides plantlets in vitro by inducing shoot formation with benzylaminopurine (BAP) and subsequently rooting the shoots in vitro. Winton [14], working with triploid P. tremuloides callus, also obtained complete plantlets, demonstrating for the first time in vitro propagation of a forest tree with a superior genotype. Among coniferous species, adventitious shoots were first produced in callus cultures of Sequoia sempervirens [15]. However, it was not until 25 years later that complete plantlets of a conifer, Pinus palustris, were regenerated in vitro [16]. Since the pioneering work with Populus and P. palustris, hundreds of tree species have been propagated in vitro, although most of this work has been done on an experimental rather than an operational scale. It would be unrealistic to attempt to review here all of the in vitro propagation research with forest trees reported to date. The most recent complete review of forest tree micropropagation is that of Thorpe et al. [17]. In addition, a number of books have been published in the past 10 years containing chapters describing in vitro propagation of many of the important woody angiosperm and gymnosperm genera. We would refer those desiring information on manipulation of individual woody plant genera in vitro to books edited by Bajaj [18-20] or Bonga and Durzan [21]. Here, we will briefly review the basics of each of the three systems along with their advantages and disadvantages, citing examples of some of the more advanced systems developed for commercially important forest species.
3.3 A x i l l a r y S h o o t M u l t i p l i c a t i o n
Production of plantlets from axillary shoots is similar to vegetative propagation via rooted cuttings in that shoots are excised from source tissue and rooted individually to multiply the original genotype. The differences are that, with axillary shoot systems, the procedures are performed in vitro under aseptic conditions, and subsequent manipulations in vitro can be used to greatly multiply the number of propagules obtained. These manipulations may include treatment with a cytokinin such as BAP or zeatin, or culture conditions which induce axillary buds in the cultured tissues to elongate into shoots. Such shoots can be excised and either rooted in vitro or placed back into culture for further enhancement of axillary branching. Thus, unlike rooted cutting macropropagation, treatments can be applied in vitro which promote multiplication of new shoot material ad infinitum.
10
Jeffrey F.D. Dean et al.
One of the principal advantages of axillary shoot methods for forest tree multiplication is that all propagules are derived from preformed buds, thereby enhancing the likelihood that propagules will be true to type. Because shoots arise from meristems present in the explant, there is little chance of introducing somaclonal variation into the propagules. The greatest advantage of axillary shoot multiplication systems, however, is the fact that this method has to date proven to be the most effective technique for multiplying mature selected trees [17]. Some examples of mature hardwood forest species propagated using this method are Robinia pseudoacacia [22], Liquidambar styraciflua [23], Eucalyptus citriodora [24] and Acer saccharinum [25, 26]. While axillary shoot multiplication systems have been the primary in vitro propagation method applied to hardwoods, the successful application of this technique to conifers has been less frequently reported. In pines, this appears to be due to difficulty in stimulating elongation of the axillary buds found at the bases of needle fascicles [27]. An exception to this occurs with Pinus radiata, for which workers in New Zealand have developed an axillary shoot multiplication system which has enabled them to plant thousands of clonal trees in the field since the mid-1980s [28]. Given that production of plants from axillary shoots has some similarities to propagation from rooted cuttings, it might be expected that these techniques would share some common disadvantages. One such disadvantage is a relatively low frequency of propagule production. Although repeated cycles of in vitro culture can ultimately produce thousands of propagules, there is often a substantial lag phase before operational numbers of plants can be produced regularly. Axillary shoot multiplication methods are also relatively labor intensive, requiring significant amounts of handling, for both cycling of cultures and production of plantlets. Plantlet production can require multiple steps, including induction, shoot elongation, shoot excision, rooting, and acclimatization of plantlets, each of which may require significant inputs of labor. Therefore, although axillary shoot multiplication remains the major route for the regeneration of woody angiosperms in vitro, its labor-intensive nature has limited its application mainly to woody ornamentals which have relatively high single-tree values compared to forest species. McCown and McCown [29], who described axillary shoot multiplication systems for Quercus, Amelanchier, Ulmus, Betula, and Populus, argued that tree microculture must become more automated to reduce labor costs before this technique can be economically applied to forest species. However, because of multiple handling steps, axillary shoot multiplication methods may not be as amenable to scale-up or automation as other methods for forest tree propagation, although advances in robotics may change this potential [30].
3.40rganogenesis Organogenesis is the de novo production of plant organs (buds, shoots, and roots) from organized tissues or callus. As with axillary shoot multiplication
Forest Tree Biotechnology
11
systems, organogenic cultures are usually stimulated to produce buds by addition of a cytokinin to the medium. In many cases, initial explants are induced to form callus and subsequently buds. Then, as with axillary shoot methods, the buds are elongated into shoots, excised, and rooted individually. The primary advantage of organogenic regeneration methods over axillary shoot methods is a potential for higher frequency plantlet production in a shorter period of time. Callus can be grown in large quantities with less demand for labor and space, and adventitious shoot production can be used to achieve high multiplication rates. However, like axillary shoot methods, organogenesis-based methods may require the labor-intensive steps of shoot elongation, excision, rooting, and plantlet acclimatization to produce field-plantable stock. In addition, unlike axillary shoot methods, organogenic methods, especially those requiring an intermediate callus, may be associated with the production of significant amounts of somaclonal variation in the regenerated plantlets. Thus, the resulting plantlets from a given clone may display unacceptable phenotypic variation. Lester and Berbee [31], for example, observed a wide range of variation in plantlets derived from callus cultures of Populus. Organogenic regeneration systems have been developed for a number of coniferous genera, including Pinus [e.g. 16], Picea [e.g. 32], Pseudorsuga [33] and Abies [e.g. 34]. In most cases, adventitious buds were induced to form directly from tissues such as seedling cotyledons. Among conifers, only Pinus eldarica has produced long-term callus cultures that could be induced to form adventitious buds from which plants were successfully regenerated [35]. In a few cases, plantlets produced from adventitious conifer buds have been tested in the field. In the cases of Pinus taeda and Pseudotsuga menziesii, plantlets derived from adventitious buds survived well, but lagged behind seedlings in height growth [36, 37]. However, over the past 10 years the emphasis of conifer micropropagation research has shifted to somatic embryogenesis, since it is believed by many working in the area that this technique offers the best potential for scale-up to commercially viable levels. As of 1987, McCown and McCown [29] were unable to cite a single case of commercial application of a micropropagation system based on adventitious bud generation for a North American hardwood. Although to our knowledge this situation remains unchanged, a number of promising adventitious bud systems have been reported for hardwoods in the past few years. Among these, high-frequency adventitious bud regeneration systems have been reported for Liquidambar styraciflua [-38~41], several Populus species and hybrids [e.g. 42-45], Ulmus spp. [46], and Robinia pseudoacacia E47-50].
3.5 Somatic Embryogenesis Somatic embryogenesis is the de novo production of structures resembling zygotic embryos, either from organized tissues or from callus. Structures
12
JeffreyF.D. Dean et al.
classified as somatic embryos must be bipolar (possessing both root and shoot poles) and have no vascular connection to the source tissue. Somatic embryos may be derived either through direct or indirect embryogenesis. In direct embryogenesis, embryos are formed essentially by multiplication of a zygotic embryo explant, i.e. by embryo cloning [51]. Indirect embryogenic systems involve a dedifferentiation of non-embryonic tissue to form a callus from which somatic embryos arise [51]. As with most other plant species, somatic embryogenesis in forest trees is usually induced by exposure to an auxin such as NAA or 2,4-D, although there are a few cases of embryogenesis being induced by cytokinins [e.g. 52, 53] or no exogenous growth regulators at all [e.g. 54]. Since continuous exposure to auxin usually results in repetitive cycles of embryo production, growth regulators are usually removed from the medium following induction to allow the somatic embryos to complete development. In some cases, only a few weeks or even days of exposure to auxin is required to induce repetitive embryogenesis [e.g. 55, 56]. The first report of somatic embryogenesis in a hardwood forest species was for Santalum album [57]. Since that time, somatic embryogenesis has been reported in hundreds of angiosperm trees (see reviews by Tulecke [-58] and Warm [59]). However, it was not until 1985 that somatic embryogenesis was reported in a coniferous species, Picea abies [60]. In the last decade, somatic embryogenesis has been reported for most commercially important conifers, including Pinus [e.g. 61-63], Abies [52], Larix [e.g. 64] and Pseudotsuga [65]. For a full summary of somatic embryogenesis in coniferous trees, the reader is referred to reviews by Attree and Fowke [66] and Tautorus et al. [67]. The most advanced systems with regard to high-frequency plantlet production have been developed for Picea. Canadian researchers working with Picea 91auca have used abscisic acid, osmotica and desiccation treatments to obtain high levels of vigorous plant production from somatic embryos [68]. Workers at BC Research planted the first large-scale field tests of somatic embryo-derived conifers from cultures of interior spruce (Picea 91auca engelmannii complex) [69]. Somatic embryogenesis has been cited by many authors as the in vitro regeneration system of choice for economical production of clonal populations of forest trees [e.g. 70]. Certainly, this type of system has a number of powerful advantages over axillary shoot multiplication methods and organogenesis. A major advantage is the potential for very high frequency regeneration. Depending on the species, virtually unlimited numbers of embryos can be generated from a single explant. In addition, embryogenic cultures of many species can be grown in liquid, allowing production and handling of thousands of embryos at one time. Thus, in comparison to axillary shoots and organogenesis, somatic embryogenesis offers the potential for high-volume large-scale propagation which can translate into significant labor savings. Greater economies of scale may be possible if bioreactor and continuous culture technologies can be applied to embryogenic systems [e.g. 71,72]. The feature of somatic embryogenesis which may ultimately have the largest impact for mass propaga-
Forest Tree Biotechnology
13
tion of forest trees is the fact that the product is an embryo. The morphological and physiological similarity of somatic embryos to zygotic embryos means that they are complete propagules in themselves, with embryonic roots, shoots and leaves, and, most importantly, the "program" to make a complete plant. As a consequence, no separate shoot elongation or rooting steps are required for plantlet production. This characteristic further lowers labor inputs and gives somatic embryos the potential for direct delivery to the greenhouse or field (see section 3.9 on artificial seeds), thereby eliminating the need for labor-intensive transplanting. One drawback of current forest tree embryogenic systems is the low frequency of plantlet production or "conversion" of somatic embryos to plantlets. Although numerous systems have been reported, and some of these produce embryos at high frequencies, a major bottleneck has been induction of embryo maturation and subsequent production of field-plantable stock. Currently, only a handful of tree species such as Liriodendron tulipifera and some Picea species can be propagated via somatic embryogenesis in sufficient numbers to enable establishment of useful field tests [69, 733. Another major disadvantage of embryogenic propagation methods for forest species is that the bulk of the systems reported to date rely on immature tissues (i.e. from seeds or seedlings) as explanting material. Thus, the material being propagated is of unproven genetic value. Most reports of somatic embryogenesis in tree species are in reality reports of "embryo cloning," in which the zygotic embryo is induced to replicate itself indefinitely. However, in the past few years, a few reports have appeared in which embryogenic cultures were initiated from mature tissues. For instance, embryogenesis cultures have been initiated from the male flower parts of Quercus [743 and Aesculus [75], while Michler and Bauer [76] used leaf tissues of a Populus hybrid of known genetic value to obtain somatic embryos.
3.6 Protoplast Culture Another potential application of in vitro culture which may eventually succeed for forest tree improvement is generation of somatic hybrids via protoplast fusion. For example, protoplasts of Citrus species from different genera which were unable to hybridize sexually were fused, and somatic hybrid plantlets were regenerated [77]. Although regeneration of somatic hybrids has not been reported to date for a forest tree, protoplasts have been isolated from a number of forest species and induced to regenerate cell walls and eventually divide to produce protoplast-derived plantlets. Angiosperms regenerated from protoplasts include Populus spp. [78], Ulmus spp. [79] and Liriodendron tulipifera [80]. Among gymnosperms, embryogenic cultures have provided a reliable source of totipotent protoplasts, and many conifers have been regenerated from protoplasts derived from embryogenic cultures. These include Pinus taeda [62], Pinus caribaea [81], Picea glauca [82], Abies alba [83], and Larix species [84, 85],
14
Jeffrey F.D. Dean et al.
3.7 In Vitro Screening and Somaclonal Variation As mentioned earlier, organogenic and embryogenic regeneration systems may be characterized by significant levels of somaclonal variation. This phenomenon may be regarded as a nuisance if the goal is production of truly clonal propagules. However, somaclonal variation may also be applied as a tool for generating useful variants. Although not frequently reported in forest trees, screening of genotypes for such traits as disease resistance can be accomplished in vitro, and this can be followed by production of propagules from the selected material. This technique has been applied to the selection of some coniferous trees [86]. It has also been used to generate hybrid Populus variants that were resistant to the herbicide glyphosate [87] as well as eastern cottonwood (Populus deltoides) variants that displayed increased or decreased resistance to leaf rust caused by Metampsora medusae [88].
3.8 Cryopreservation Another technique that is likely to come into widespread use in operational propagation of forest trees is long-term cryopreservafion of culture tissues. The ability to store germplasm for long periods will become critical if in vitro propagation methods are to be used commercially. This is because most of the forest tree embryogenic systems reported to date depend on materials of unknown genetic value. Consequently, trees derived from these cultures will need to be tested for field performance prior to their release into production programs. Even if researchers are eventually able to clone mature tissues from elite genotypes of particular forest species, there will still be a need for field evaluation of trees derived from these cultures. In addition, under continuous culture, the useful life of most embryogenic cultures does not exceed a few years. Therefore, embryogenic cultures must be held in a suspended state while trees derived from them are tested. Once field testing is complete, cultures of those clones showing the best field performance can be scaled up for production of propagules. Fortunately, embryogenic cultures of both gymnosperms and angiosperms seem to be relatively amenable to cryopreservation. This technique has already been applied to the long-term storage of embryogenic cultures of Betula [89], Picea glauca [90], Pinus caribaea [91] and Abies nordmanniana [92].
3.9 Artificial Seeds One of the advantages of somatic embryogenesis over the other in vitro propagation systems noted above is the potential of somatic embryos to be directly delivered to the greenhouse or field as synthetic seeds. Efforts have concentrated on preparing somatic embryos to emulate seeds with regard to such characteristics as desiccation tolerance, resistance to mechanical damage and ability to
Forest Tree Biotechnology
15
sustain ex vitro post-germinative growth. These features would facilitate mechanical handling and automated planting of somatic embryos. A number of encapsulation techniques have been employed, including the use of such materials as hydrated gels and water-soluble resins [93]. While development of artificial seed technology has mainly focused on species of agronomic importance, such as alfalfa, the same technology has been tested on somatic embryos of a few forest trees. Artificial seeds have been generated by alginate gel encapsulation of somatic embryos of Pinus taeda [61, 62], Picea species [94], Santalum album [95] and Robinia pseudoacacia [96]. Although plantlets have been regenerated from some of these artificial seeds, none of these systems has been developed to the point where the somatic embryos could be employed as if they were true seeds.
4 Genetic Engineering As illustrated by the wide variety of specialized cultivars available within agronomic and horticultural crop species, traditional plant breeding based on controlled sexual crosses has the potential to tailor the traits of virtually any plant to be more suitable for its end use. However, this process generally requires selection and back-crossing through nine or more generations just to introduce a single trait into a plant line and, thus, the life-cycle characteristics of long-lived and slow-maturing forest trees make such breeding efforts difficult at best. Additionally, such plant improvement schemes are limited to modification of traits already available within the species or within closely-related hybridizing species. Fortunately, recent advances in biochemistry and molecular biology have provided techniques for the direct transfer of foreign genes to plant tissues, thereby circumventing some of the most troublesome bottlenecks inherent to traditional plant improvement strategies. Only slightly more than a decade ago, researchers in several laboratories accomplished the first controlled introductions of foreign genes into plants [97-100]. This process, commonly referred to as transformation, has been used to introduce into plants a variety of foreign genes whose expression confers novel traits to the transformants [101, 102]. A wide variety of genetic constructs designed to modulate the expression of existing plant genes in such a way as to enhance the properties of the desired plant products have also been tested, and the product of one such transformation, the Flavr-SavrTM tomato, recently became the first genetically engineered plant product approved for human consumption [103]. Most plant transformation work has so far focused on agricultural crops [104], but efforts to produce genetically engineered trees are on the increase and several reviews of the work to date are available [105-111]. The treatise by Haines [112] is a particularly useful guide to the opportunities presented by biotechnology with respect to tree improvement. As discussed in greater detail in the following sections, the minimum requirements for successful gene transfer into forest trees are: (1) a tissue culture system
16
Jeffrey F.D. Dean et al.
Table 1. Tree species that have been successfully transformed and regenerated.
Species
Method
Reference
Agrobacterium Agrobacterium Microprojection Agrobacterium Agrobacterium Protoplast/Chemical Electroporation Agrobacterium Agrobacterium Microprojection Microprojection Agrobacterium Agrobacterium Microprojection Agrobacterium Agrobacterium Agrobacterium
[114] [115] [116] [117] [118] [1 I9] [120] [121] [122, 123] [ 124] [125] [126] [127] [128] [129] [130] [49]
Agrobacterium Microprojection
[131] [ 132]
Angiosperms Allocasuarina verticillata Azadirachta indica Carica papaya Carya illinoensis Citrus jambhiri Eucalyptus sp. Juglans regia Liquidambar styraciflua Liriodendron tulipifera Malus Pumila Populus sp. Prunus domestica Prunus persica Robinia pseudoacacia
Cymnosperms Larix decidua Picea glauca
allowing for the regeneration of intact plants (see the preceding section); (2) a delivery system for stable introduction of genes into the cultured cells; and (3) a selection system for recovering those cells that have received the introduced genes. It then remains for the researcher to identify the appropriate foreign gene to be introduced or endogenous gene requiring altered expression, while of final concern are the promoter and regulatory elements that will serve to express the introduced gene construct in the correct tissues at the proper developmental stage. Table 1 lists a variety of horticultural and forest trees that have been successfully transformed and regenerated, although in most cases the inserted genes served only as markers of transformation and not as sources of new traits. It should be noted that, owing to the ease with which they may be transformed and regenerated, members of the genus Populus have been the predominant model system to date for demonstrating new transformation techniques for trees [e.g. l 13]. Thus, numerous reports of transformation and regeneration of species and hybrids in this genus appear in the literature, but no attempt has been made to present an exhaustive list of that work here.
4.1 Tissue Culture Considerations All of the considerations previously discussed for the regeneration of intact plantlets from in vitro tissue culture are important when considering a system for
Forest Tree Biotechnology
17
gene transfer work. However, the two most important considerations are that the culturing system should be one in which the new plantlet can be derived from a single cell (i.e. organogenic, embryogenic or protoplast culture), and that the frequency with which plantlets can be generated from the system should be as high as possible. Regeneration from single cells ensures that all cells in the resulting plantlet will carry the introduced transgene at the same position in the genome, thereby standardizing its expression and inheritance in subsequent progeny. A high frequency of regeneration is required, particularly when using physical gene transfer techniques (see below), because as few as 1:1000 cells receiving the engineered gene will insert it into their genetic material in such a way that it will be stably retained and expressed in subsequent generations of cells. Unfortunately, tissue culture systems that are highly regenerable are not always highly transformable [133, 134], and even when transgenes are stably inserted into the recipient genome, a variety of positional and cell state effects may lead to a loss of expression in regenerated plantlets [135]. Although tissue culture systems meeting all these requirements are still relatively rare for forest tree species, the increasing number of successes noted in the foregoing section suggest that the availability of competent systems will not be a limiting factor for long.
4.2 Biological Gene Transfer (Agrobacteria-Mediated Transformation) The techniques by which exogenous DNA is transferred into plant cells may be classified as either physical or biological, depending upon whether the DNA is "naked" or passed along by an intermediary organism. Transformation systems based on plant viruses were at one time thought to hold great potential for genetic engineering and some effort has continued in this area [136, 137], but results for the most part have been disappointing [101]. In contrast, the best characterized and most accessible plant transformation systems available today are biological and use domesticated varieties of the plant pathogens, Agrobacterium tumefaciens or A. rhizogenes, to mediate transfer of DNA to the host tissues. Manuals describing comprehensive protocols for performing such work are available [138, 139], and the book edited by Croy [140] provides an invaluable resource enumerating a vast number of vectors, marker genes, regulatory elements and other tools for gene transfer into plants. In their pathogenic forms, A. tumefaciensand A. rhizogenes cause crown-gall and hairy-root diseases, respectively [141]. The diseases appear primarily in woody and herbaceous dicots, and actually represent unusual parasitic interactions that are initiated when the bacteria colonize wounded tissues. The bacteria locate these wounds through a chemotactic response to phenolic compounds (e.g. acetosyringone or sinapic acid) released into the soil from the wound [142]. Once inside the wound, the bacteria use a specialized process resembling bacterial
18
JeffreyF.D. Dean et al.
conjugation to transfer into the plant cells DNA copied from an extra-chromosomal element referred to as the Ti-plasmid [143]. A pair of 25-base-pair direct repeats on the Ti-plasmid, the so-called T-DNA borders, facilitate transfer and integration of any genes lying between the borders into the host plant genome where they can subsequently be replicated and expressed. Only that DNA lying between the T-DNA borders is copied and transferred as single stranded DNA to the host plant cells. Until recently, this process was considered the only example of inter-kingdom DNA transfer. However, a related system appears to be capable of transferring DNA between bacteria and yeast [144]. In the wild-type disease-state interaction, some of the genes carried between the T-DNA borders encode enzymes that alter phytohormone (auxin or cytokinin) levels in the transformed tissues, and thereby cause tissue deformation (i.e. galls or hairy roots). Another set of genes transferred from the wild-type Ti-plasmid catalyze the production of opines, a class of amino acid derivatives unique to Agrobacterium infections, which are utilized by the bacteria as a source of both carbon and nitrogen [145]. Several other (vir) genes Iie in regions of the Ti-plasmid outside the T-DNA borders, and are expressed only in the bacterium. The vir gene products control such aspects of the interaction as conjugative transfer of T-DNA into the plant cell, integration of the DNA into the host genome, and the range of plant species recognized as hosts for the bacterium [146-148]. Several detailed reviews of the molecular basis for Agrobacterium-mediated transformation are available [143, 148, 149]. The realization that any DNA flanked by T-DNA sequences could be transferred from the Ti-plasmid and integrated into the genome of infected plant tissues was the key to development of transformation systems based on Agrobacteria. Of course, crown galls and hairy roots are not desirable features for trees of the future, so the Ti-plasmids used for routine plant transformation have been domesticated by removal of the "oncogenes" (phytohormone and opine biosynthesis genes) which cause these tissue deformations. The oncogenes have been replaced in the T-DNA by a variety of selectable marker genes, such as those whose products confer resistance to antibiotics or herbicides (see below). To facilitate recombinant gene manipulations, the T-DNA and vir gene regions of the Ti-plasmid have, in many cases, been placed on separate plasmids to yield what are commonly referred to as binary vector systems [99, 150]. The shuttle plasmid of a typical binary system contains the T-DNA, and is often simply referred to as the binary vector. These shuttle plasmids generally contain a selectable marker gene, a multiple cloning site for insertion of the genetic construct, and a variety of gene expression modulators (promoters, enhancing elements, and terminators), all of which are flanked by the T-DNA sequences [149]. Elsewhere on the shuttle plasmid are replication origins competent for maintaining the plasmid in either Agrobacterium or E. coli - - the latter primarily to facilitate access to the well-developed molecular biology systems available for this organism. A wide variety of shuttle vectors are available, and improved or specialized versions are continually being announced [151-156]. The vir genes required for T-DNA transfer and integration with the binary system are
Forest Tree Biotechnology
19
maintained in Agrobacterium on so-called helper plasmids, and a variety of these plasmids have been developed in an effort to improve the efficiency of T-DNA transfer and integration and to expand the range of host plants which may be transformed using the Agrobacterium system [157, 158]. This last point, in particular, is significant with respect to efforts at transforming commercial gymnosperm tree species. The range of host plants suitable for Agrobacterium transformation was long thought to be limited to the dicotyledonous angiosperms, since tumors are seldom formed when monocots or gymnosperms are treated with these bacteria [159 161]. However, tumor formation is a result of a complex series of events that occur after DNA transfer and integration, and, consequently, transformation may occur in the absence of tumor formation [157]. Since recognition of the separate nature of these events, a significant number of monocots have been verifiably transformed using Agrobacterium [162]. In some cases where DNA was not transferred to any cells in treated monocots, specific strains of Agrobacterium were shown to have difficulty in attaching to the cells in the wound [163], while in other cases the intended hosts were found to secrete compounds that blocked expression of the vir genes [164]. An increasing array of bacterial strains and plasmids have provided ways to circumvent some of these problems [165, 166]. As a consequence, various combinations of broad host range Agrobacterium strains and vir genes are now routinely tested against different genetic lines of recalcitrant host species during the development and optimization of appropriate transformation systems [167]. The observation that vir gene expression can be induced by tissue explants from a variety of algae, bryophytes, pteridophytes, and gymnosperms, as well as the monocotyledonous and dicotyledonous angiosperms, suggests that the host range for Agrobacterium transformation may yet be extended far beyond its current use [168]. However, it seems unlikely that Agrobacteriummediated transformation could ever become universally applicable to all species of plants. As can be seen from Table 1, a variety of woody dicots, including species important for the wood and wood-product industries, have been regenerated from tissues transformed using Agrobacterium. Sadly, amongst the conifers, Agrobacterium-mediated transformation followed b y regeneration has so far only been accomplished with larch [-131,169]. Although Agrobacterium has been shown to be capable of introducing DNA into the cells of other conifer species [ 170-173], regeneration of plants from such transformed tissues remains problematic. It seems that those conifer cells predisposed to regenerate are difficult to transform with Agrobacterium, while easily transformed tissues are recalcitrant to regeneration [174]. It appears that a variety of factors, including the genetic background and metabolic state of the host cells, play a significant role in governing the susceptibility of these plants to Agrobacterium-mediated transformation [135, 175]. As a consequence, it is difficult to determine at this time whether the lack of progress in this area could best be addressed through focused research into improved Agrobacterium systems or more reliable regeneration protocols for the commercial gymnosperms.
20
JeffreyF.D. Dean et al.
4.3 Physical Gene Transfer 4.3.1 Transformationby Microprojectile Bombardment Increasingly, microprojectile bombardment is becoming the transformation technique of choice for plants that are recalcitrant to Agrobacterium-mediated systems [176-179]. In this method, DNA containing the transgene is coated onto small (1-5 ~tm) particles of gold or tungsten which are subsequently shot into the target tissues with sufficient force to pierce the plant cell walls. The particles lodge within the cells without killing them, and the DNA is released for incorporation into the recipient genome. This technique is not restricted to particular plant species or even to plants in general, as it has also been used to transform a wide variety of animal cells [180-182], yeast [183, 184], fungi [185, 186] and even bacteria [187]. Microprojectile bombardment can even be used to transform the genomes of chloroplasts [188, 189] and mitochondria [183]. In the original instrument, tungsten microcarriers were accelerated by a gunpowder charge (hence the common reference to "gene guns") [190], but the commercial instrument developed from that early work uses a controlled burst of pressurized helium for improved consistency [191]. Subsequent variations on this general theme have resulted in the development of instruments optmized for increased control over the bombardment conditions [192, 193] or decreased cost of the instrumentation [194, 195]. The equipment designs described in the latter papers put this technology well within reach of any moderately wellfunded laboratory contemplating plant transformation experiments. As is the case for binary vectors used in Agrobacterium-mediated transformation, vectors containing various selectable markers, multiple cloning sites, and expression modulating sequences (promoters/terminators) have been designed specifically for microprojectile transformation work [196]. The principal difference between these vectors and those used in Agrobacterium-mediated systems is the elimination of DNA required by Agrobacterium, such as the T-DNA borders and the Agrobacterium-competent origin of replication. The smaller vectors that result from omission of these sequences are more tractable to many of the molecular biological manipulations used to prepare transgene constructs, i.e. plasmid preparation, restriction digests, ligations, and bacterial transformation, but a further reason for minimizing extraneous DNA in these vectors lies in the nature of the integration event. With Agrobacterium-mediated transformation, only the DNA lying between the T-DNA borders is transferred into the recipient cell, and the number of copies of T-DNA integrated into the host genome is usually very low [149]. However, with microprojectile transformation, many copies of the entire plasmid containing the transgene are introduced into every cell, and it is often the case that many copies of this DNA are integrated in the recipient genome [149]. Given the current regulatory concerns with regard to characterization of the integrated DNA prior to field release of transgenic plants, it is surprising that more effort has not gone into developing minimal DNA vectors specialized for microprojectile transformation
Forest Tree Biotechnology
21
similar to those developed by During [155] for Agrobacterium-mediated transformation. On the other hand, efforts are underway to develop innovative systems for site-specific transgene insertion [197, 198], and, in this respect, elements from both the Saccharomyces FLP/FRT system [199, 200] and the bacteriophage P1 Cre-loxP system [201,202] have been successfully tested in plants. The specificity inherent in these systems would appear to be ideal for the development of transgenic plants with precise insert structure and location. Further flexibility in future transgenic plant development may result from using derivatives of the Ac/Ds transposable element system from maize to remove specific sequences, such as selectable marker genes, after transformation has been accomplished [203].
4.3.2 Transformation of Protoplasts Direct uptake of foreign DNA by plant cells can potentially avoid the difficulty presented by limited susceptibility of some woody plants to infection with Agrobacteria, as well as the high equipment costs usually associated with microprojectile transformation. Protoplasts can be induced to efficiently take up naked DNA under the influence of polyethylene glycol (PEG) [204-206] or a polarizing electric field (electroporation) [207-209]. Several forest tree species of commercial importance having limited transformability by Agrobacterium, including various spruces and eucalypts [109, 174], have demonstrated at least transient expression of foreign genes introduced by one or more of these techniques. Systems for regenerating spruce, pine, and eucalyptus trees from protoplasts have also been reported [210]. However, the high labor demand required to isolate and culture protoplasts, as well as the need for a reliable regeneration system, remain significant drawbacks to widespread use of this transformation technique. In addition, the increased risk of isolating somaclonal variants from transformed protoplasts limits the usefulness of this system for developing commercial products [174]. On the other hand, the number of woody species for which protoplast regeneration systems are available is constantly increasing [109, 210], and in some situations protoplast transformation may provide unique opportunities, for example, as an alternative to microprojectile bombardment in organelle transformation [211,212].
4.3.3 Alternative Transformation Techniques The transformation techniques described above are by far the most widely used and accepted. However, each has its drawbacks. Consequently, a variety of alternatives have been proposed, but most have met with marginal success at best [101]. Sawahel and Cove [213] have provided a fairly concise catalog of most of these alternative techniques, but two interesting techniques for transforming intact cells, sonication [214] and silicon carbide fiber microinjection
22
JeffreyF.D. Dean et al.
[215], were developed too recently to be covered by these authors. The latter technique seems particularly simple and inexpensive, and has been used successfully in several different laboratories [216-219]. The essence of the technique is that DNA is coated onto minute (0.6 ~tm diameter, 10-80 lain length), rigid fibers of silicon carbide, and these are subsequently vortexed with suspension-cultured cells of the recipient plant. Like tiny syringe needles, the fibers penetrate the cell walls without killing the cells and deliver the DNA for subsequent integration. This technique would appear to have the potential to gain widespread acceptance once its less precise aspects, e.g. how best to immobilize the DNA on the fibers, are more rigorously optimized. In terms of cost efficiency and ease of use, silicon carbide fiber transformation appears to hold great potential for enabling any laboratory equipped for plant tissue culture to successfully embark on plant transformation projects.
4.4 Selection Systems, Promoters, and Regulatory Elements To identify those cells that have received the transgene, transformation vectors carry either screenable or selectable markers [104, 220]. Selectable markers encode enzymes that enable the transformed cells to grow under conditions that kill non-transformed cells; thus, the most commonly used selectable markers encode enzymes that detoxify antibiotics or herbicides added to the culture medium. Neomycin phosphotransferase (kanamycin-resistance) [221], hygromycin phosphotransferase [222], gentamicin acetyltransferase [223, 224], and the Tn5 gene encoding bleomycin resistance [225] are the most widely used antibiotic resistance markers, while phosphoinothricin acetyltransferase (biaphalos-resistance) [226], modified 5-enolpyruvylshikimate-3-phosphate (EPSP) synthase (glyphosate-resistance) [227], modified acetolactate synthase (chlorsulfuron-resistance) [228], and bromoxynil nitrilase (bromoxinyl-resistance) [229] are commonly used herbicide resistance markers. It is not unusual to find that cell lines recovered from selective media have lost their regenerative capacity, and this is a principal reason for using screenable markers. The most widely used screenable markers have been chloramphenicol acetyltransferase (CAT) [230] and/~-glucuronidase (GUS) [231], but these have the drawback of requiring destructive sampling of the putatively transformed tissues in order to assay the enzyme activity. Alternatively, a gene from the jellyfish, Aequoria victoria,which encodes a protein (GFP) that fluorescences green under UV irradiation, is showing great promise as a non-destructive screenable marker for transgenic organisms [-232]. Modified versions of the gene have already been developed to express proteins with altered emission spectra so that the expression from multiple gene constructs may be monitored simultaneously [233]. GFP has been used as a reporter gene in several plant systems, including suspension-cultured Citrus cells [234, 235], after the gene was modified to eliminate problematic sequences, such as a cryptic splice site [236]. However, its use in woody species may be limited, since transformed cells of
Forest Tree Biotechnology
23
L. tulipifera or L. stryraciflua which expressed the G F P polypeptide did not fluoresce (Kim and Merkle, unpublished observations), possibly because these particular cells could not catalyze the post-translational event necessary to form the fluorophore. The promoter and terminator sequences most widely used for expression of transgenes in plants have been derived from one of three sources: the 35S RNA of cauliflower mosaic virus (CaMV), the nopaline synthase (hop, nos) gene from one class of A. tumefaciens Ti-plasmids, or the octopine synthase (ocs, oct) gene from a second class of A. tumefaciens Ti-plasmids. These promoters all lead to expression of chimeric genes at high levels in a wide variety of plant tissues, and various combinations have been developed to improve constitutive expression of gene constructs [220]. To efficiently modify characteristics of specific plant tissues, e.g. wood, increased efforts need to be made to identify promoters that can drive gene expression to high levels in the specific tissues of interest (106). Relatively few such promoters have been identified in plants, and woody plants, in particular, have received only cursory examination with respect to the promoters that control gene expression. To some extent this may be due to a perception that research in this direction should be supported by those commercial enterprises that stand to gain the most from application of tissue-specific promoters. 4.5 Current and Future Targets f o r Genetic Engineering in Forest Trees 4.5.1 Lignin Content and Composition Lignin makes up 20~30% of the total dry weight of wood and constitutes the principal barrier to production of pulp and paper. Estimates suggest that altering the composition of lignin in gymnosperms so that it resembles the more easily extracted lignin in angiosperms could provide the US industry alone with an annual saving in excess of $6 billion [237]. The potential savings that would accrue from reductions in total lignin content of the order of 10-15% have been suggested to be of a similar magnitude. Because the lignin biosynthetic pathway is relatively well understood, it has provided an opportune target for early experiments in genetic engineering of forest trees, and detailed reviews of efforts to date are available [107, 238]. Reduced cinnamyl alcohol dehydrogenase (CAD) activity in transgenic plants leads to incorporation of hydroxycinnamoyl aldehydes into lignin, and the resultant red-brown polymer is much easier to remove from fibers using chemical pulping techniques [239,240]. Transgenic plants having reduced hydroxycinnamoyl O-methyltransferase (OMT) activity have shown a variety of effects in terms of both lignin content and composition [241-244]. However, it is hoped that co-expression of an angiosperm OMT along with a ferulate-5hydroxylase (F5H), such as was recently cloned from Arabidopsis [245, 246], will
24
Jeffrey F.D. Dean et al.
lead to the production of sinapyl alcohol in transgenic gymnosperms. A successful outcome would result in the conversion of the softwood lignin from the less easily degraded guaiacyl-rich polymer to a more easily degradable guaiacylsyringyl copolymer, such as that which distinguishes hardwood species. Extracellular glucosidases with high specificity for monolignol glucosides have been purified from conifer cambium, and these would appear to provide excellent targets for efforts to alter lignin deposition [247, 248]. The oxidative polymerization step in lignin biosynthesis presents another interesting possibility for manipulating lignin via genetic engineering [-107]. Attempts to down-regulate lignification by reducing peroxidase expression in transgenic plants have not yet yielded positive results [249], and efforts to use antisense laccase genes in a similar manner have so far been inconclusive E250, 251].
4.5.2 Sterility and Early Flowering The release of genetically engineered trees into environments in which they can interbreed with wild populations is unlikely to be approved by regulatory agencies unless mechanisms to control sexual reproduction are in place [-252]. Thus, if the value of genetically engineered trees is to be realized, it is essential that sterile tree lines be created. In addition to solving problems associated with release, sterile tree lines will have the added benefit that proprietary genetic materials will be better protected from acquisition by competitors. It is also possible that by blocking formation of reproductive structures, energy resources will be redirected into vegetative growth, thereby increasing growth yields. The production of cellular toxins under the control of promoters specific for gene expression in pollen-producing tissues has been shown to result in male sterility [253, 254], and such a system should function equally well in trees. Tree breeding could be greatly accelerated if trees could be induced to flower while they were still seedlings, i.e. within 1 or 2 years following germination. Not only would this dramatically shorten the breeding cycle, but it would also make breeding in the controlled environment of the greenhouse possible. Finally, induction of early flowering in forest trees would enable rapid characterization of inheritance patterns of transgenes in the progeny of transgenic trees. Recent research with a group of flower-meristem-identity genes from the herbaceous model plant, Arabidopsis, has culminated in the production of transgenic Arabidopsis, in which precocious flower development was induced by overexpression of the inserted transgene [255]. Hybrid aspen transformed with the same Arabidopsis LEAFY gene (LFY) under the control of the cauliflower mosaic virus 35S promoter produced flowers after only five months in the greenhouse [-256]. This work has obvious potential to completely revolutionize the entire field of tree breeding.
Forest Tree Biotechnology
25
4.5.3 Herbicide Resistance Herbicides are widely used in site preparation to minimize competition from weedy species in newly replanted forests. However, these chemicals often cannot be applied directly to the trees themselves, or even to the area immediately around them, without causing significant damage or even death. Glyphosate is a broad-spectrum low-toxicity herbicide that blocks the aromatic amino acid biosynthetic pathway at EPSP synthase, and genes encoding mutant forms of this enzyme have been shown to confer resistance to the herbicide when expressed in transgenic plants [227]. Resistance to glyphosate has been introduced into commercial hardwood [127, 257] and softwood [169] tree species, and resistance to other herbicides has been conferred to various other transgenic plants and trees [258-260]. As shading and competition for nutrients are known to be significant factors limiting tree growth rates in young plantations, development of herbicide resistance would appear to be a logical target for tree improvement. However, widespread application of these compounds can have a profoundly detrimental effect on the environment, and concern for this was highlighted in a recent survey that showed a widespread understanding among forestry professionals that aerial spraying of herbicides in forests would not easily be accepted by the general public [261]. On the other hand, as noted by Jouanin et al. [110], herbicide-resistant trees would probably be most helpful in a nursery setting where herbicide application can be more rigorously controlled.
4.5.4 Insect and Pathogen Resistance Endotoxin (Bt) produced by the Bacillus thuringiensis soil bacterium has enjoyed widespread forest application as a non-toxic biopesticide that is highly specific for phytophageous lepidopteran, coleopteran, and dipteran insects [262]. The biology and mode of action of this biopesticide has been reviewed [263-265], and various studies have examined factors influencing its use in forest settings as well as its persistence in forest ecosystems [266, 267]. Transgenic tobacco and tomato plants expressing this protein were shown to be protected from feeding by lepidopteran larvae [268, 269], and similar protection from gypsy and forest tent moth caterpillars was demonstrated in transgenic poplar [270-272]. Transgenic larch trees expressing the Bt endotoxin have been recovered by Shin et al. [169], but there are no reports, as yet, regarding the resistance of these softwoods to insect attack. Although it is anticipated that such genetically engineered trees will eventually be deployed in commercial plantings, insects have been shown to be capable of developing resistance to these toxins [273]. There is thus a need to develop appropriate deployment strategies [274]. Protease inhibitor proteins are produced in many plants as a response to wounding or insect feeding, and the role of these proteins is to interfere with digestion in the insect gut [275]. A trypsin inhibitor protein from cowpea was
26
JeffreyF.D. Dean et al.
used to protect transgenic tobacco from Heliothis virescens larvae [276], and a cysteine protease inhibitor from rice was recently shown to protect poplar from a species of boring beetle [277]. Schuerman and Dandekar [111] reviewed efforts to date to engineer plants for viral resistance, but work with woody plants has so far been limited to horticultural species [278, 279]. A variety of strategies using transgenes to control fungal diseases have been discussed and tested [280, 281]. However, none of these techniques have yet been tested in trees.
4.5.5 Tree Form and Fiber Morphology Wood formation requires carbon partitioning to favor the plant stem, and Timmis and Trotter [237] noted the potential for increasing carbon deposited in the tree bole by altering the growth habit of the tree. They used several lines of evidence to suggest that tree growth habit might be controlled by a limited number of genes, and speculated on the possible significance of work performed by Klee and co-workers [282] in which transgenic petunias having altered auxin metabolism showed significant increases in xylem and phloem formation. Recent work has shown that alteration of auxin metabolism in transgenic poplar leads to a variety of changes in tree form and wood characteristics [283].
4.5.6 Novel Traits There has recently been significant interest in using plants to clean up sites contaminated with heavy metals and toxic organic wastes [284 288]. Stomp et al. [289] noted a variety of tree growth habit characteristics that would make these plants very good candidates for use in phytoremediation.
4.6 Regulatory Considerations Like all other technological advances, the production of transgenic plants brings with it the potential for unforeseen consequences [290-292]. To minimize the possibility that such consequences could lead to irreversible problems when these organisms are introduced into the environment, all transgenic plants are subjected to a process of risk assessment prior to field release. The regulations governing such risk assessments vary from country to country, but Raffa [293] presents a set of guiding principles that are valid in most cases. In addition to the explicit governmental regulations on the subject, several recent reviews discussing the possible impacts of transgenic plant release should be considered by researchers attempting to create transgenic plants for use in the commercial sector [294-299]. Although most of these guidelines and rules were developed to address situations encountered in the cultivation of agricultural crops, it can
Forest Tree Biotechnology
27
readily be argued that these considerations are even more critical in the case of genetically engineered trees, since these organisms have a longer life-span and hence a much longer period in which to pass their transgenes to wild populations.
5 Molecular Breeding Classical plant breeding strategies are generally untenable for most forest tree species. Long generation times (5 to 20 years), coupled with the fact that many traits important to forest product industries can only be fully assessed after the tree has reached maturity, preclude rapid analyses of test crosses and have, thus, effectively limited breeding programs to the most economically important tree species. Even in these cases, family pedigrees of more than three or four generations are rare. To avoid the delay of having to score mature phenotypes, breeding experiments have increasingly relied on biochemical markers whose expression has been correlated with particular mature phenotypes. For example, isozymic variation has been widely used in agronomic as well as forest breeding programs [e.g. 112, 300]. For isozyme analyses, proteins contained in tissue extracts are resolved in a gel matrix on the basis of their physical properties (size, shape, or electrical charge). Subsequent staining based on the catalytic activity of the enzyme results in specific visualization of the isozymes, even in the presence of numerous other unrelated enzymes. An advantage of this method is that it yields co-dominant markers, since both alleles of a heterozygous locus can be detected. Unfortunately, there are relatively few biochemical markers whose expression has been matched with desirable phenotypes, and the expression of these markers is in many cases highly dependent upon environmental factors. It is also important to note that only a small amount of the genetic variation in a population is displayed phenotypically. Furthermore, since only about one-third of amino acid substitutions effect changes in the protein that can be detected by electrophoretic techniques, no more than one third of the total genetic variation is discernible through the use of isozyme analysis. With respect to the potential variation contained in the entire genome, isozymic markers are even more limited, since only about 0.5% of the typical eukaryotic genome consists of coding sequences [301]. Using DNA-based markers, researchers can potentially access all of the variation contained within a given genome, thereby increasing their chances of finding a marker that segregates with the specific phenotype of interest. Thus, the main advantage of molecular markers is that they are based on the polymorphisms occurring naturally in the DNA of a given species, and, as forest trees are among the most genetically variable organisms known [302], molecular markers useful for tree breeding programs should not be difficult to identify. In
28
JeffreyF.D. Dean et al.
addition to constituting a larger pool of potential markers, DNA-markers have the advantage that they do not change in response to environmental factors or the developmental stage of a particular plant tissue. For a general review on the use of molecular genetic markers in plants see Rafalski and Tingey [303], and for comprehensive discussions of the ways in which molecular markers may be applied to forest tree improvement programs consult Neale et al. [304] and Haines [112].
5.1 DNA Marker Techniques 5.1.l Restriction Fragment Length Polymorphism (RFLP) RFLP (restriction fragment length polymorphism) analysis was first described by Botstein et al. [305], and has been reviewed elsewhere [306-308]. Briefly, DNA is extracted and cut into discrete fragments using restriction endonucleases. The DNA fragments are then separated by gel electrophoresis and transferred to a membrane filter so that they can be detected using specific RNA or DNA probes in a process known as Southern blotting. Polymorphisms are then detected by the presence or absence of labeled probe in bands on the blot [309]. Advantages of this method are that RFLPs are multi-alleleic and co-dominant (i.e. heterozygotes can be distinguished from either homozygote), and there are a virtually unlimited number of potential probes. Drawbacks include the relatively large amount of DNA required (2-15 pg per gel lane, depending on the genome size of the species, although it should be noted that a single blot can be reprobed many times), as well as the length of time and high cost required for each analysis. More problematic is the potential for artifacts which arise from incomplete digestion of the DNA by restriction endonucleases. In order to maximize sample throughput, procedures for preparing DNA are often streamlined, and, as a result, the DNA can be impure. Impurities in turn lead to partial digestion which becomes manifest as extra bands on the Southern blots.
5.1.2 Random Amplified Polymorphic DNA (RAPD) RAPDs (random amplified polymorphic DNA) are dominant molecular markers pioneered by Williams et al. [310] and Welsh and McClelland [311]. The method is based on PCR (polymerase chain reaction) and uses random oligonucleotide primers (usually 10-mers) to amplify genomic DNA. The use of short primers and low annealing temperatures leads to the generation of PCR products from multiple sites in the genome, and polymorphisms become apparent when sequence differences affecting primer binding sites give rise to different banding patterns when the reaction products are analyzed by gel electrophoresis.
Forest Tree Biotechnology
29
By way of advantages, RAPD analyses do not require prior sequence information, and none of the plant-derived DNA requires passage through bacteria. In addition, the technique requires very little DNA (10-25 ng), radioisotopes are unnecessary, and once the DNA has been prepared, the experimental procedure is relatively simple and amenable to automation [312]. The principal disadvantage with RAPDs is that only one strand of the DNA is amplified, and, as a consequence, dominant alleles are visualized whether the individual is heterozygous or homozygous at the particular locus. Haploid tissues, such as occur in conifer megagametophytes, can be used to circumvent this limitation [313]. A further disadvantage is that PCR-based technologies on the scale required for plant breeding are relatively costly because of the expense of the polymerase.
5.1.3 Bulked Segregant Analysis Bulk segregant analysis, described by Michelmore et al. [314], is a useful technique for finding new markers, typically RAPDs, that are linked to a particular locus or to an area that is sparsely populated with markers. The method uses two groups of individuals that arise from a single cross and are homozygous for alternate alleles governing a particular trait. If members of a segregating population are pooled on the basis of their phenotype, then the groups can be expected to be heterozygous at all unlinked loci but markedly skewed in the direction of one or other parental allele for a linked locus. Advantages of the procedure are that arbitrary primers can be used as probes, and the ability to pool individuals speeds analysis. One particular disadvantage of this technique for the purposes of forest tree breeding is linkage equilibrium, which is highly outbred species may mask the segregation of loci. In the case of conifers, this particular problem can again be minimized by analyzing haploid megagametophyte tissues from a sufficient number of individuals within a family [3133.
5.1.4 Microsatellite Repeat Polymorphisms Microsatellite repeats are highly polymorphic regions of DNA that occur frequently in eukaryotic genomes and are most commonly represented by the dinucleotide repeats [AC]n, [AG]n, and [AT]n [315-317]. PCR primers based on DNA sequences from regions flanking microsatellite sequences may be used to amplify the genomic DNA spanning the repeat region. The resultant products may then be resolved by gel electrophoresis to reveal allelic variations in the lengths of repeats. Advantages of this technique are that microsatellite repeats occur with moderate abundance, are highly polymorphic, and provide codominant markers. In addition, because the technique is based on PCR, it requires very little input DNA, and no radioisotopes are required.
30
JeffreyF.D. Dean et al.
Disadvantages include a requirement for cloning and sequencing to characterize multiple microsatellite loci, not all of which will prove to be useful for analysis, as well as a need to use high resolution gels in order to differentiate polymorphisms as slight as two or three nucleotides.
5.1.5 Amplified Fragment Length Polymorphisms (AFLP) A DNA fingerprinting technique referred to as amplified fragment length polymorphism (AFLP) uses genomic DNA digested with restriction endonucleases as a PCR template [318]. The technique is similar to RFLP analysis, but relies on the power of PCR, rather than hybridization, to reveal subtle differences in the DNA from different sources. The binding between short PCR primers and DNA restriction fragments is very specific, and may not even occur between sequences that differ by as little as one or two nucleotides. Advantages of the method include no need for prior sequence data and the ability to selectively amplify sequences from a large number of restriction fragments. In addition, AFLP mapping can be used to detect corresponding genomic clones in large fragment libraries, e.g. cosmid or yeast artificial chromosomes. On the other hand, the technique is limited in practice to the resolving power of the gel electrophoresis system. Thus, reactions that generate more than 50 to 100 fragments are generally too complex to analyze. Also, the method functions best when used in conjunction with established breeding programs and documented multigenerational lines. The procedure also shares the high cost inherent in RAPD and RFLP analyses as well as the lengthy time requirements of RFLP mapping.
5.1.6 Microsatellite Hybridization Another recently developed method takes advantage of the fact that, in a typical RAPD analysis, abundant PCR products may be visualized by staining, but additional products in quantities below the staining threshold of ethidium bromide are also resolved in the gel. These minor products can be visualized by hybridization with microsatellite probes (e.g. [GT]8, [CT]8, [CC]12, [GA]12) to produce multiple independent and polymorphic fingerprints [319,320]. Advantages of this combined method include no need for prior sequence information, low input of template DNA, and when using non-isotopic detection methods, the possibility of using probes repeatedly. The method is especially useful for displaying polymorphisms in species where little variation is revealed by RAPD analyses alone. However, the method also suffers from the relatively high cost associated with RAPD analyses, as well as the time required for RFLP analyses.
Forest Tree Biotechnology
31
5.2 Applications o f DNA Markers in Forest Research The long generation times of forest trees places a premium on the development of methods that will allow for early genetic selection of the desired phenotype. Indirect selection based on DNA markers can be practiced at a very early age once linkages to important traits are identified. The advantages are obvious in that cost would be much lower than with progeny testing, selection intensities would be much higher, and selection would be potentially more efficient because of the higher heritabilities of the markers. One recent development that has great potential for forest tree breeders came from studies of the genes that regulate floral development in the model herbaceous plant, Arabidopsis thaliana. By introducing the LEAFY gene from Arabidopsis into aspen it was possible to induce flowering in transgenic aspen during their first year of growth as opposed to waiting the typical 10-20 years [-256]. Undoubtedly, this technology will find widespread application in forest tree improvement programs, particularly when coupled with marker-assisted selection.
5.2.1 GeneticLinkage Maps Genetic linkage maps are constructed by analyzing RFLP and/or RAPD markers and monitoring the segregation of a marker among progeny of a test cross. The high degree of polymorphisms allows for a virtually unlimited number of markers to be mapped using a single segregating population. A database of markers is made from the same set of F2 or backcross plants. When a map containing 100-200 well-dispersed markers has been constructed, virtually any new marker can be linked to one that has been previously mapped. The accumulated markers for a segregating population form a database that becomes a valuable resource for placement of new markers, and the database can be expanded by distributing the mapping data to other research groups. The practical strategies for building genetic linkage maps in plants was recently reviewed [321]. A major obstacle to the assembly of genomic maps for marker-aided tree breeding is that most tree species are highly outcrossed, resulting in significant linkage equilibrium between marker loci and the genetic locus of interest [322]. As a consequence, relationships established from the analysis of one cross do not necessarily hold for a second cross and, therefore, conventional mapping of forest trees in natural populations is extremely difficult. It has been argued that these hurdles severely limit the utility of marker-assisted selection in forest tree breeding. However, an opposing view, based on recent technological and theoretical advances, has been offered by O'MaUey et al. [323]. These authors note that by screening a sufficient number of potential RAPD markers and choosing the most reliable, i.e. markers that are consistently easy to score, one is able to quickly map the genome of individual trees. With maps of individual trees, breeders can minimize the difficulties brought about by linkage equilibrium and
32
JeffreyF.D. Dean et al.
circumvent the need for the extended pedigrees commonly used for agronomic crop improvement. Of special interest to forest tree geneticists is the advantage provided by using conifer megagametophyte tissue as a DNA source. The haploid nature of this DNA allows for recombination and segregation events to be followed among open-pollinated seeds from a single tree, and circumvents the dominant allele problem inherent in using RAPDs with diploid samples. One is able to search for markers that are consistently found together in the same seeds, indicating that they are on the same chromosome [313]. This unique advantage of gymnosperms serves to partially offset the difficulties inherent in the large genome sizes typical of many softwood tree species. The lack of a suitable haploid stage in angiosperms led to the development of a "pseudo-test cross" method, which, in conjunction with RAPD technology, allows construction of single-tree genetic linkage maps [324]. The method ~elies on the observation that a cross between two heterozygous individuals results in many single-dose RAPD markers segregating 1 : 1 in their F1 progeny. Although this mapping strategy requires a controlled genetic cross to be made, the additional effort enables one to survey twice the heterozygosity, i.e. that from each parent. The method may also be applied to conifers to quickly generate single-tree linkage maps [-324].
5.2.2 Mapping Projects DNA-based molecular marker maps are being made for a number of hardwood and softwood species. RAPDs of megagametophyte tissue have been used to build a map covering 90% of the maritime pine (Pinus pinaster) [325] and 85% of the longleaf pine (Pine palustris Mill.) genomes [326]. Maps are being constructed for Norway spruce (Picea abies Karst.) [327], slash pine (Pinus elliotti Engelm. var. elliotti) [328], and white spruce (Picea 91auca (Moech) Voss) [313]. RFLPs were used to construct a map for loblolly pine (Pinus taeda L.) in a three-generation pedigree strategy [329]. More recently it was shown that RFLP probes used in building a loblolly pine map could be used in related species for the purpose of comparative genome mapping [330]. For eucalyptus, an outbred third-generation pedigree was used to build a map using RAPDs, RFLPs, and isozyme markers [331], and the pseudo-test cross strategy was used for Eucalyptus 9randis and E. urophylla [332]. A genomic map was made for peach [333] using bulk segregant analysis and RAPDs.
5.2.3 Marker-Assisted Selection Molecular markers provide a powerful tool for monitoring traits difficult to select for using traditional techniques, as well as for the simultaneous selection
Forest Tree Biotechnology
33
of multiple traits. To use this technique, linkages between marker loci and phenotypically (economically) important traits must be identified. Then, instead of waiting for the tree to reach maturity before it displays the trait of interest, the breeder can select the offspring of a cross that carry the specific linked DNA marker(s). With forest trees, marker-aided selection is best applied to single traits that are relatively well characterized, e.g. wood specific gravity [334]. Neale and co-workers have identified quantitative trait loci (QTLs) influencing wood specific gravity in an outbred pedigree of loblolly pine [335]. RAPDs have been used to identify QTLs which influence early height growth in pines [336], while RAPDs and the pseudo-test cross strategy were used to identify QTLs affecting vegetative propagation in Eucalyptus [332]. Bradshaw and Stettler [337] mapped QTLs for stem growth and form as well as spring leaf flush in poplar. The molecular genetics of rust resistance in poplars was studied by Villar et al. [338] who used RAPDs and bulk segregant analysis to quickly identify suitable markers which were subsequently validated in a 2 x 2 factorial mating design. Markers may also be used to locate valuable genes to facilitate their cloning by map-based or positional cloning. The technique is based on the premise that any gene consistently inherited with a marker must lie near it on the same chromosome. Once isolated and characterized, the genes could be used to transform recipient forest trees or used as markers for the early selection of desirable phenotypes in wild-type (non-transformed) trees. The approach shows the greatest immediate potential when applied to traits governed by single genes. Devey et al. [339] have combined the power of RAPDs and bulked segregant analysis of haploid megagametophyte tissues to make significant progress with this approach by identifying ten RAPD markers that map close to a sugar pine (Pinus lambertiana Dougl.) gene for resistance to white pine blister rust, one of the most damaging pathogens of Southern pines. Fusiform rust is a devastating disease of loblolly pine for which resistance was for many years assumed to have a polygenic basis [9]. However, RAPDs and bulk segregant analysis were recently used to identify a region of the host genome that behaves as a single dominant gene and is responsible for resistance to this disease [340]. Narrowcrown growth habit is a desirable phenotype for high-density forest plantations, and RAPDs, in conjunction with bulked segregant analysis, have been used to identify a locus linked to pendula, a single gene controlling the narrow-crown phenotype in Norway spruce (Picea abies L.) [341]. Three markers linked to resistance to black leaf-spot disease in Chinese (Ulmus parvifolia) and Siberian (U. pumila) elms [342], and two markers linked to scab resistance in apple (Malusfloribunda) [343] have been identified using a similar strategy. Considering the difficulties (transformation, vegetative propagation, government regulations) currently besetting genetic engineering of forest trees, it is conceivable that marker-assisted selection may have greater near-term impact on forest tree improvement [323].
34
JeffreyF.D. Dean et al.
5.3 Other Applications o f DNA Markers 5.3.1 Quantification of Genetic Diversity RAPD markers have been used to investigate the distribution of variability in natural populations of Eucalyptus 91obulus and provide the foundation for effective breeding and gene conservation strategies [344]. RAPDs have revealed an extensive amount of genetic diversity in trembling aspens (Populus tremuloides) in a study that also highlighted the benefits of careful PCR primer selection [345]. The authors identified a single RAPD primer that was able to separate 83% of the trees sampled in any given population. Microsatellite markers have also been used to determine the level of genetic variation in tropical rain forest species where they proved to be powerful tools for analyzing population structure with respect to gene flow and paternity [346].
5.3.2 Genotype Verification and Delineation RAPD markers have proven useful in identifying the parentage of progeny. In European white birch (Betula pendula Roth), a commercial set of random 10-mer primers was used to confirm lineages [347]. The authors pointed out that although robotics are becoming more commonplace in repetitive PCR routines, there is still considerable labor involved in the preparation of amplificationquality DNA templates. To minimize this problem, they developed a pooledprogeny strategy similar to that used in bulk segregant analysis [314], in which leaf samples of equivalent fresh weight from different individuals were pooled and used as the source of DNA for subsequent RAPD analyses. RAPDs have also been used to analyze somatic embryos and plants regenerated from embryogenic lines of Norway spruce (Picea abies (L.) Karst) to determine the level of somaclonal variation [348]. It was shown that material from the same cell line shared identical banding patterns, whereas regenerants from different cell lines were clearly distinguishable. RAPD patterns were reported to be somatically stable, thereby enabling researchers to trace clone identity from the laboratory to the field [349]. However, because of the dominant nature of RAPD markers, as well as the difficulty in reproducing banding patterns both in different laboratories and between pedigrees, the authors concluded that RAPD markers were not likely to replace isozyme analyses for this purpose. RAPD mapping of peach (Prunus persica) was reported by Pooler and Scorza [350], who cautioned that spontaneous somatic rearrangements (bud sports) could lead to unexpected inheritance of RAPD markers. RAPDs were used to identify mislabeled clonal material (ramets) in a sitka spruce (Picea stichensis) breeding program [351], and were further used to identify and assess the extent of natural introgression between populations of interior spruce, white spruce (Picea 9lauca (Moench) Voss) and Engelmann spruce (Picea engelmannii Parry) [352].
35
Forest Tree Biotechnology
6
Electronic and Computational Resources
Although not a biotechnology, sensu stricto, the Internet hosts a wide variety of information resources that are of increasing use to researchers in all areas of forestry. As with all other aspects of the Internet, forestry-related resources are being added at an exponential rate, and providing a current and comprehensive list of useful sites is becoming impossible. However, Table 2 contains a highly subjective list of relatively stable sites that should act as excellent starting points for those wishing to explore and sample the wide variety of forestry resources online. Table 2. A Selection of Internet Resources Related to Forest Biotechnology (5/1/96) Server Page Title General Starting Points Yahoo Forestry List Galaxy Forestry List TAPPIWeb List of Forestry Servers Natural Resources: Institutions and Organizations More Forestry Stuff The Pulp and Paper Jumplist Other Related Forestry Servers The WWW Virtual Library - Forestry Governmental Organizations CSIRO Forestry and Forest Products Dendrome-Tree Genome Mapping Project Finnish Forest Research Institute (METLA) Japanese Forest Research Institute National Center for Biotechnology Information Natural Resources Canada US Forest Service Educational Organizations Auburn University Institute for Paper Science and Technology Louisiana State University NYForest Online Oxford University Poplar Molecular Network Texas A&M University University of Alberta University of Illinois University of Maine University of Minnesota University of Washington
Internet Address http://www.yahoo.com/science/agriculture/ forestry/ http://galaxy.einet.net/galaxy/Engineering-andTechnology/Agriculture/Forestry.html http://www.tappi.org/resource.htm http://sfbox.vt.edu: 10021/Y/yfleung/forestry. html ht tp://forestry.bangor.ac.uk/forst uff.htm http://www.nlbbs.com/~ dc001/paper/j umplist. html http://www.chem.csiro.au/extpulp.htm http://www.icfrnet.nnp.ac.za/mirrors/Forestry. html http://www.chem.csiro.au/fordiv2.htm http://s27w007.pswfs.gov/ http://www.metla.fi/ ht tp://ss.ffpri.affrc.go.jp/ http://www.ncbi.nlm.nih.gov/ http://www.emr.ca/ ht tp://www.fs.fed.us/Homepage,html http://www.forestry.auburn.edu/ http://www.ipst.edu/ ht tp://wwwlfpl.forestry.Isu.edu/ http://149. 119.1.26/default.html http://ifs.plants.ox.ac.uk/ gopher://poplar 1,cfr.washington.edu:70/1 http://165.91.48.43/ http://www.rr.ualber ta.ca/ http://gopher.ag.uiuc.edu:80/NRES/forest ry-research.html http://www.ume.maine.edu/~ nfa/for mgt/ wse.htm http://mercury.forestry.umn.edu/FP/ForP.html http://weber.u.washington.edu: 80/--,cfrwww/
Jeffrey F.D. Dean et al.
36 Table 2. (Continued)
Server Page Title
Internet Address
Independent Organizations
American Forest & Paper Association Technical Association of the Pulp and Paper Industry United Nations - FAO Corporations ForestNet ForestPro Lej6 International
http://www.infobahn.com.tw/adv/afpa/afpa.htm http://www.tappi.org/ http://www.fao.org/WAICENT/Forestry.htm http://www.forestnet.com/ http://www.forestpro.com/ http://www.transport.com/~ leje/homepg.html
Individuals
Jeff Lindsay Knut's Pages Steve Shook's Directory
http://www.athenet.net/~ jlindsay/Paper.shtm 1 :~top http://www.carleton.ca/~kmenard/forest.html http://weber.u.washington.edu/~ esw/fpm.htm
Miscellaneous
BiotechnologyLaw Web Server BiotechnologyPermits Home Page
http://biotechlaw.ari.net/ http://www.aphis.usda.gov/BBEP/BP/
Usenet Newsgroups
Agroforestry Pulp and Paper
bionet.agroforestry misc.industry.pulp-and-paper
Listservs Wood Net Wood Science
wood-net@ esusda.gov wood-science @unixg.ubc.ca
7 Conclusions The true innovator is often characterized by an ability to see the far-reaching trends and changes in technology and economy as well as their connections to global, social, and industrial patterns. The long rotation times required for forest tree production demand that the forester should have a particularly good crystal ball in order to anticipate future trends and needs for the trees being planted. When rotation times are short, e.g. Brazilian eucalyptus cut after seven years, it is relatively easy to predict that a newly planted tree will probably be used for fibers. Even with rotation times of the order of 25 to 30 years, as is the case for southern pine in the United States, one may be able to make a reasonably correct prediction regarding the future use of the tree. However, when rotation times run to 100 years or more, as is the case in Scandinavia, you need a crystal ball of increasingly high quality to make any reasonable predictions. Regardless of what will be the particular end use of trees in the next century, there is no denying that there will be an urgent need for them to grow faster.
Forest Tree Biotechnology
37
Demand for fibers and solid wood will continue to grow even as harvestable forest acreage decreases due to population increases and set-asides that reserve forested areas for recreational purposes. In addition, advances in wood chemistry and biotechnology may also make trees the ideal feedstock for "biorefineries" that could produce alternatives to most of the current petrochemical products of oil-refineries. It is unlikely that we will forever be stuck with the dogma that forestry is only for the production of paper and timber. Thus, we anticipate that trees will eventually be cultivated like other plants for faster growth, greater yield, and a more diversified and efficient use. New silvicultural practices will certainly be needed to speed the growth of trees, and as a consequence, biotechnological techniques are likely to become commonplace in forestry. In vitro propagation will enable us to produce large numbers of genetically improved trees without having to establish large breeding orchards. Molecular markers will help in identifying superior genotypes as well as in monitoring the products of improved breeding schemes. Genetic engineering will provide the means to rapidly bring new genetic materials to bear on problems such as acid rain and attack by exotic insects. By combining traditional practices with the techniques of biotechnology, tomorrow's foresters will likely produce a revolution in the way forestry is practiced, as well as in the products which can be derived from trees. There is no doubt that there is a way ahead if only we have a head for the way.
8 References
1. Zobel BJ, Van Buijtenen JP (1989) Wood variation: Its causes and control. Springer, Berlin Heidelberg New York 2. Karenlampi P (1992) Paper Timber 74:650 3. Zobel BJ, Blair R (1975) Appl Poly Symp 28:421 4. Barker RG (1994) Tappi 57:107 5. Jett JB, Zobel BJ (1975) Tappi 58:92 6. Kramer PJ, Kozlowski TT (1979) Physiology of woody plants. Academic Press, Orlando 7. Li BL, Williams CG, Carlson WC, Harrington CA, Lambeth CC (1992) Can J For Res 22:290 8. Magnussen S, Yanchuk AD (1993) Silvae Genet 42:25 9. Zobel B, Talbert J (1984) Applied forest tree improvement. Wiley, New York 10. Gautheret R (1940) CRAS Paris 210:744 11. Jacquiot C (1949) CRAS Paris 229:529 12. Mathes MC (1964) Phyton 21:137 13. Wolter KE (1968) Nature 219:509 14. Winton L (1968) Science 160:1234 15. Ball EA (1950) Growth 16:295 16. Sommer HE, Brown CL, Kormanick PP (1975) Bot Gaz 136:196 17. Thorpe TA, Harry IS, Kumar PP (1991) In: Debergh PC, Zimmerman RH (eds) Micropropagation. Kluwer, Dordrecht, p 311 18. Bajaj YPS (1986) Trees I. (Biotechnology in forestry and agriculture, vol 1) Springer, Berlin Heidelberg New York 19. Bajaj YPS (1989) Trees II. (Biotechnology in forestry and agriculture, vol 5) Springer, Berlin Heidelberg New York
38
Jeffrey F.D. Dean et al.
20. Bajaj YPS (1991) Trees III. (Biotechnology in forestry and agriculture, vol 16) Springer, Berlin Heidelberg New York 21. Bonga JM, Durzan DJ (1987) Case histories: Gymnosperms, angiosperms and palms. (Cell and tissue culture in forestry, vol. 3) Nijhoff, Dordrecht 22. Davis JM, Keathley DE (1987) Plant Cell Rep 6:431 23. Sutter EG, Barker PB (1985) Plant Cell Tiss Org Cult 5:13 24. Gupta PK, Mascarenhas AF, Jagannathan V (1980) Plant Sci Lett 17:259 25. Preece JE, Huetteman CA, Ashby WC, Roth PL (1991a) J Amer Soc Hort Sci 116:142 26. Preece JE, Huetteman CA, Ashby WC, Roth PL (1991b) J Amer Soc Hort Sci 116:149 27. Boulay M (1987) In: Green CE, Sommers DA, Hackett WP, Biesboer DD (eds) Plant tissue and cell culture. Liss, New York, p 367 28. Horgan K (1987) In: Bonga JM, Durzan DJ (eds) Case histories: Gymnosperms, angiosperms and palms. (Cell and tissue culture in forestry, vol 3) Nijhoff, Dordrecht, p 128 29. McCown DD, McCown BH (1987) In: Bonga JM, Durzan DJ (eds) Case Histories: Gymnosperms, angiosperms and palms. (Cell and tissue culture in forestry, vol 3) Nijhoff, Dordrecht, p 247 30. Aitken-Christie J (1991) In: Debergh PC, Zimmerman RH (eds) Micropropagation. Kluwer, Dordrecht, p 363 31. Lester DT, Berbee JG (1977) For Sci 23:122 32. Arnold S von, Eriksson T (1978) Physiol Plant 44:283 33. Cheng TY (1975) Plant Sci Lett 2:97 34. Saravitz CH, Blazich FA, Amerson HV (1991) Can J For Res 21:404 35. Gladfelter H J, Phillips GC (1987) Plant Cell Rep 6:163 36. Amerson HV, Frampton LJ Jr, Mott RL, Spaine PC (1988) In: Hanover JW, Keathley DE (eds) Genetic manipulation of woody plants. Plenum, New York, p 117 37. Ritchie GA, Long AJ (1986) N Z J For Sci 16:343 38. Sommer HE (1981) Proc 16th Southern Forest Tree Improvement Conference, p 184 39. Sommer HE, Wetzstein HY, Lee N (1985) Proc 18th Southern Forest Tree Improvement Conference, p 42 40. Brand MH, Lineberger RD (1988) Plant Sci 57:173 41. Brand MH, Lineberger RD (1991) Plant Cell Tiss Org Cult 24:1 42. Chalupa V (1974) Biol Plant 16:316 43. Ahuja MR (1987) In: Bonga JM, Durzan DJ (eds) Cell and tissue culture in forestry, vol 3. Nijhoff, Dordrecht p 207 44. Coleman GD, Ernst SG (1989) Plant Cell Rep 8:459 45. Coleman GD, Ernst SG (1990) Plant Sci 71:83 46. Fink CVM, Sticklen MB, Lineberger RD, Domir SC (1986) Plant Cell Tiss Org Cult 7: 237 47. Chalupa V (1983) Biologia Plant 25:305 48. Barghchi M (1987) Plant Sci 53:183 49. Hart K-H, Keath|ey DE, Davis JM, Gordon M P (1993) Plant Sci 88:149 50. Arrillaga I, Merkle SA (1993) HortScience 28:942 51. Sharp WR, Sondahl MR, Caldas LS, Maraffa SB (1980) In: Janick J (ed) Horticultural reviews, vol 2. AVI, Westport, CT, p 268 52. Schuller A, Reuther G, Geier T (1989) Plant Cell Tissue Organ Cult 17:53 53. Norgaard JV, Krogstrup P (1991) Plant Cell Rep 9:509 54. Gharyal PK, Maheshwari SC (1981) Naturwissenschaften 68:379 55. Tulecke W, McGranahan G (1985) Plant Sci 40:57 56. Wetzstein HY, Ault JR, Merkle SA (1989) Plant Sci 64:193 57. Rao PS (1965) Phytomorphology 15:175 58. Tulecke W (1987) In: Bonga M, Durzan DJ (eds) Cell and tissue culture in forestry, vol 2. Nijhoff, Dordrecht, p 61 59. Wann SR (1989) In: Janick J (ed) Horticultural reviews, vol 10. Timber Press, Portland, p 153 60. Hakman I, Fowke LC, Arnold S von, Eriksson T (1985) Plant Sci 38:53 61. Gupta PK, Durzan DJ (1987a) Bio/Technology 5:147 62. Gupta PK, Durzan DJ (1987b) Bio/Technology 5:710 63. Jain SM, Dong N, Newton RJ (1989) Plant Sci 65:233 64. Nagmani R, Bonga JM (1985) Can J For Res 15:1088 65. Durzan DJ, Gupta PK (1987) Plant Sci 52:229
Forest Tree Biotechnology
39
66. Attree SM, Fowke LC (1991) In: Bajaj YPS (ed) High-tech and micropropagation L (Biotechnology in agriculture and forestry, vol. 17) Springer Verlag, Berlin Heidelberg New York. p 53 67. Tautorus TE, Fowke LC, Dunstan DI (1991) Can J Bot 69:1873 68. Attree SM, Moore D, Sawhney VK, Fowke LC (1991) Annals Bot 68:519 69. Webster FB, Roberts DR, Mclnnis SM, Sutton BCS (1990) Can J For Res 20:1759 70. Gupta PK, Timmis R, Mascarenhas AF (1991) In Vitro Cell Dev Biol 27P: 159 71. Styer DJ (1985) In: Henke RR, Hughes KW, Constantin M J, Hollaender A (eds) Tissue culture in forestry and agriculture. Plenum Press, New York, p 117 72. Stuart DA, Strickland SG, Walker KA (1987) HortScience 22:800 73. Merkle SA, Schlarbaum SE, Cox RA, Schwarz OJ (1991) Proc of the 21st Southern Forest Tree Improvement Conference, p 56 74. Gingas VM (1991) HortScience 26:1217 75. Jorgensen J (1989) J Plant Physiol 135:240 76. Michler CH, Bauer EO (1991) Plant Sci 77:111 77. Grosset JW, Gmitter FG Jr, Chandler JL (1988) Theor Appl Genet 75:397 78. Russell JA, McCown BH (1986) Plant Sci 46:133 79. Sticklen MB, Lineberger RD, Domir SC (1985) Plant Sci 41:117 80. Merkle SA, Sommer HE (1987) Amer J Bot 74:1317 81. Laine E, David A (1990) Plant Sci 69:215 82. Attree SM, Bekkaoui F, Dunstan DI, Fowke LC (1987) Plant Cell Rep 6:480 83. Hartmann S, Lang H, Reuther G (1992) Plant Cell Rep 11:554 84. Klimaszewska K (1989) Plant Cell Rep 8:440 85. Aderkas P yon (1992) Can J For Res 22:397 86. Amerson HV, Mott RL (1990) In Vitro Cell Dev Biol 26: 25A 87. Michler CH, Voelker TM, Moioffer RJ (1992) In Vitro Cell Dev Biol 28: 105A 88. Prakash CS, Thielges BA (1989) Phytophathology 79:805 89. Mannonen LM, Monger WA (1992) In Vitro Cell Dev Biol 28: 109A 90. Kartha KK, Fowke LC, Leung NL, Caswell KL, Hakman I (1988) J Plant Physiol 132:529 91. Laine E, Bade P, David A (1992) Plant Cell Rep 11:295 92. Norgaard JV, Baldursson S, Krogstrup P (1993) Silvae Genet 42:93 93. Redenbaugh K (1993) Synseeds: applications of synthetic seeds to crop improvement. CRC Press, Boca Raton, Fla. 94. Lulsdorf MM, Tautorus TE, Kikcio SI, Bethune TD, Dunstan DI (1993) Plant Cell Rep 12:385 95. Bapat VA, Rao PS (1992) J Plant Biochem Biotech 1:109 96. Arrillaga I, Tobolski JJ, Merkle SA (1994) Plant Cell Rep 13:171 97. Davey MR, Cocking EC, Freeman J, Pearce N, Tudor I (1980) Plant Sci Lett 18:307 98. De Framond AJ, Barton KA, Chilton M-D, (1983) Bio/Technology 1:262 99. Hoekema A, Hirsch PR, Hooykaas PJJ, Schilperoort RA (1983) Nature 303:179 100. Zambryski P, Joos H, Genetello C, Leemans J, Van Montagu M, Schell J (1983) EMBO J 2:2143 101. Potrykus I (1991) Annu Rev Plant Physiol Plant Mol Biol 42:205 102. Fisk HJ, Dandekar AM (1993) Sci Hort 55:5 103. Kramer MG, Redenbaugh K (1994) Euphytica 79:293 104. Lindsey K (1992) J Biotechnol 26:1 105. Dunstan DI (1988) Can J For Res 18:1497 106. Whetten R, Sederoff R (1991) For Ecol Manag 43:301 107. Dean JFD, Eriksson K-EL (1992) Holzforschung 46:135 108. Hammatt N (1992) World J Microbiol Biotech 8:369 109. Manders G, Davey MR, Power JB (1992) J Exp Bot 43:1181 110. Jouanin L, Brasileiro ACM, Lepl6 JC, Pilate G, Cornu D (1993) Ann Sci For 50:325 111. Schuerman PL, Dandekar AM (1993) Sci Hort 55:101 112. Haines R (1994) Biotechnology in forest tree improvement. (FAO Forestry Paper No. 118) Food and Agriculture Organization of the United Nations, Rome 113. Howe GT, Goldfarb B, Strauss SH (1994) Plant Cell Tiss Org Cult 36:59 114. Phelep M, Petit A, Martin L, Duhoux E, Tremp6 J (1991) Bio/Technology 9:461 115. Naina NS, Gupta PK, Mascarenhas AF (1989) Curr Sci 58:184 116. Fitch MMM, Manshardt RM, Gonsalves D, Slightom JL, Sanford JC (1990) Plant Cell Rep 9:189 117. Fitch MMM, Manshardt RM, Gonsalves D, Slightom JL (1993) Plant Cell Rep 12:245
40
Jeffrey F.D. Dean et al.
118. McGranahan GH, Leslie CA, Dandekar AM, Uratsu SL, Yates IE (1993) Plant Cell Rep 12: 634 119. Vardi A, Bleichman S, Aviv D (1990) Plant Sci 69:199 120. Kawazu T, Doi K, Ohta T, Shinohara Y, Ito K, Shibata M (1990) Proc VIIth International Congress on Plant Tissue and Cell Culture, p 64 121. McGranahan GH, Leslie CA, Uratsu SL, Martin LA, Dandekar AM (1988) Bio/Technology 6:800 122. Chen ZZ, Stomp AM (1992) Proceedings of the SABRAO International Symposium on the Impact of Biological Research on Agricultural Productivity, p 331 123. Sullivan J, Lagrimini LM (1993) Plant Cell Rep 12:303 124. Kim MK, Sommer HE, Dean JFD, Merkle SA (1996) Tuskeegee Workshop on Transgenic Plants: Biology and Applications (Poster) 125. Wilde D, Meagher RB, Merkle SA (1991) Plant Physiol 98:114 126. James D J, Passey AJ, Barbara DJ, Bevan M (1989) Plant Cell Rep 7:658 127. Fillatti JJ, Sellmer J, McCown B, Haissig B, Comai L (1987) Mol Gen Genet 206:192 128. McCown BH, McCabe DE, Russell DR, Robison DJ, Barton KA, Raffa KF (1991) Plant Cell Rep 9:590 129. Mante S, Morgens PH, Scorza R, Cordts JM, Callahan AM (1991) Bio/Technology 9:853 130. Smigocki AC, Hammerschlag FA (1991) J Am Soc Hort Sci 116:1092 131. Huang Y, Diner AM, Karnosky DF (1991) In Vitro Cell Dev Biol 27:201 132. Ellis DD, McCabe DE, McInnis S, Ramachandran R, Russell DR, Wallace KM, Martinell BJ, Roberts DR, Raffa KF, McCown BH (1993) Bio/technology 11:84 133. Colby SM, Juncosa AM, Meredith CP (1991) J Am Soc Hort Sci 116:356 134. De Block M, Debrouwer D, Tenning P (1989) Plant Physiol 91:694 135. De Block M (1993) Euphytica 71:1 136. Meyer P, Heidmann I, Niedenhof I (1992) Gene 110:213 137. Zhang LY, Mitra A, French RC, Langenberg WG (1994) Phytopathology 84:684 138. Draper J, Scott R, Armitage P, Walden R (eds) (1988) Plant genetic transformation and gene expression. A laboratory manual. Blackwell, Oxford 139. Gelvin SB, Schilperoort RA (eds) (1994) Plant molecular biology manual, 2nd edn. Kluwer, Dordrecht 140. Croy RRD (ed) (1993) Plant molecular biology labfax. BIOS, Oxford 141. Agrios GN (1988) Plant pathology. Academic, San Diego, p 558 142. Duban ME, Lee KH, Lynn DG (1993) Mol Microbiol 7:637 143. Zambryski PC (1992) Ann Rev Plant Physiol Plant Mol Biol 43:465 144. Sikorski RS, Michaud W, Levin HL, Boecke JD, Hieter P (1990) Nature 345:581 145. Dessaux Y, Petit A, Tempe J (1993) Phytochemistry 34:31 146. Lee KH, Dudley MW, Hess KM, Lynn DG, Joerger RD, Binns AN (1992) Proc Natl Acad Sci USA 89:8666 147. Winans SC, Mantis NJ, Chen CY, Chang CH, Han DC (1994) Res Microbiol 145:461 148. Hooykaas PJJ, Beijersbergen AGM (1994) Ann Rev Phytopathol 32:157 149. Hooykaas PJJ, Schilperoort RA (1992) Plant Mol Biol 19:15 150. Gruber MY, Crosby WL (1993) In: Glick BR, Thompson JE (eds) Methods in plant molecular biology and biotechnology. CRC Press, Boca Raton, Fla., p 89 151. Becker D, Kemper E, Schell J, Masterson R (1992) Plant Mol Biol 20:1195 152. Gleave AP (1992) Plant Mol Biol 20:1203 153. Ma H, Yanofsky MF, Klee HJ, Bowman JL, Meyerowitz EM (1992) Gene 117:161 154. Bhattacharyya MK, Stermer BA, Dixon RA (1994) Plant J 6:957 155. During K (1994) Transgenic Res 3:138 156. Hajdukiewicz P, Svab Z, Maliga P (1994) Plant Mol Biol 25:989 157. Godwin ID, Fordlloyd BV, Newbury HJ (1992) Austr J Bot 40:751 158. Hood EE, Gelvin SB, Melchers LS, Hoekema A (1993) Transgenic Res 2:208 159. De Cleene M, De Lay J (1976) Bot Rev 42:389 160. Binns AN (1990) Physiol Plant 79:135 161. Porter JR (1991) Crit Rev Plant Sci 10:387 162. Conner AJ, Dommissee EM (1992) Int J Plant Sci 153:550 163. Matthysse AG, Gurlitz RHG (1982) Physiol Plant Pathol 21:381 164. Sahi SV, Chilton M-D, Chilton WS (1990) Proc Natl Acad Sci USA 87:3879 165. Warkentin TD, McHughen A (1991) Plant Cell Rep 10:489
Forest Tree Biotechnology 166. 167. 168. 169. 170. 171. 172. 173. 174. 175. 176. 177. 178. 179. 180. 181. 182. 183. 184. 185. 186. 187. 188. 189. 190. 191. 192. 193. 194. 195. 196. 197. 198. 199. 200. 201. 202. 203. 204. 205. 206. 207. 208. 209. 210. 211. 212. 213. 214. 215. 216. 217. 218.
41
Kovacs L, Pueppke SG (1993) Mol Plant-Microb Interact 6:601 Wordragon MF van, Jong J de, Schornagel MJ, Dons HJM (1992) Plant Sci 81:207 Primich-Zachwieja S, Minocha SC (1991) Plant Cell Rep 10:545 Shin DI, Podila GK, Huang YH, Karnosky DF (1994) Can J For Res 24:2059 Sederoff R, Stomp A-M, Chilton WS, Moore LW (1986) Bio/Technology 4:647 Ellis D, Roberts D, Sutton B, Lazaroff W, Webb D, Flinn B (1989) Plant Cell Rep 8:16 Morris JW, Castle LA, Morris RO (1989) Physiol Mol Plant Path 34:451 Loopstra CA, Stomp A-M, Sederoff RR (1990) Plant Mol Biol 15:1 Dandekar AM, McGranahan GH, James DJ (1993) In: Kung S, Wu R (eds) Transgenic plants, vol 2. Academic, San Diego, p 129 Bergmann BA, Stomp AM (1992) Phytopathology 82:1457 Christou P (1992) Plant J 2:275 Christou P (1993) In Vitro Cell Dev Biol Plant 29:119 Sanford JC, Smith FD, Russell JA (1993) Meth Enzymol 217:483 Morikawa H, Nishihara M, Seki M, Irifune K (1994) J Plant Res 107:117 Zelenin AV, Alimov AA, Zelenina IA, Semenova ML, Rodova MA, Chernov BK, Kolesnikov VA (1993) FEBS Lett. 315:29 Hui KM, Sabapathy TK, Oei AA, Chia TF (1994) J Immuno Meth 171:147 Miahle E, Miller LH (1994) Biotechniques 16:924 Mittelmeier TM, Dieckmann CL (1993) Mol Cell Biol 13:4203 Toffaletti DL, Rude TH, Johnston SA, Durack DT, Perfect JR (1993) J Bacteriol 175:1405 Lorito M, Hayes CK, Dipietro A, I-Iarman GE (1993) Curt Genet 24:349 Fungaro MHP, Rech E, Muhlen GS, Vainstein MH, Pascon RC, Dequeiroz MV, Pizziranikleiner AA, Deazevedo JL (1995) FEMS Microbiol Lett 125:293 Smith FD, Harpending PR, Sanford JC (1992) J Gen Microb 138:239 Boynton JE, Gillham NW (1993) Meth Enzymol 217:510 Maliga P, Carrer H, Kanevski 1, Staub J, Svab Z (1993) Phil Trans Royal Soc Biol Sci 342: 203 Klein TM, Wolf ED, Wu R, Sanford JC (1987) Nature 327:70 Kikkert JR (1993) Plant Cell Tiss Org Cult 33:221 McCabe D, Christou P (1993) Plant Cell Tiss Org Cult 33:227 Sautter C (1993) Plant Cell Tiss Org Cult 33:251 Oard J (1993) Plant Cell Tiss Org Cult 33:247 Vain P, Keen N, Murillo J, Rathus C, Nemes C, Finer JJ (1993) Plant Cell Tiss Org Cult 33:237 Malik VS, Wahab SZ (1993) J Plant Biochem Biotech 2:69 Sauer B (1993) Meth Enzymol 225:890 Wigley P, Becker C, Beltrame J, Blake T, Crocker L, Harrison S, Lyons I, Mckenzie Z, Tearle R, Crawford R, Robins A (1994) Reprod Fert Devel 6:585 Lyznik LA, Mitchell JC, Hirayama L, Hodges TK (1993) Nucl Acid Res 21:969 Lloyd AM, Davis RW (1994) Mol Gen Genet 242:653 Bayley CC, Morgan M, Dale EC, Ow DW (1992) Plant Mol Biol 18:353 Russell SH, Hoopes JL, Odell JT (1992) Mol Gen Genet 234:49 Goldsborough AP, Lastrella CN, Yoder JI (1993) Bio/Technology 11:1286 Paszkowski J, Shillito RD, Saul M, Mandak V, Hohn T, Hohn B, Potrykus I (1984) EMBO J 3:2717 Ayres NM, Park WD (1994) Crit Rev Plant Sci 13:219 Bilang R, K16ti A, Schrott M, Potrykus I (1994) Plant Mol Biol Manual AI: 1 Lindsey K, Jones M G K (1990) Physiol Plant 79:168 Van Wert SL, Saunders JA (1992) Plant Physiol 99:365 Weaver JC (1993) J Cell Biochem 51:426 Puite KJ (1992) Physiol Plant 85:403 Golds T, Maliga P, Koop HU (1993) Bio-Technology 11:95 Oneill C, Horvath GV, Horvath E, Dix PJ, Medgyesy P (1993) Plant J 3:729 Sawahel WA, Cove DJ (1992) Biotech Adv 10:393 Joersbro M, Brunstedt J (1992) Physiol Plant 85:230 Kaeppler HF, Gu W, Somers DA, Rines HW, Cockburn AF (1990) Plant Cell Rep 9:415 Asano Y, Otsuki Y, Ugaki M (1991) Plant Sci 79:247 Kaeppler HF, Somers DA, Rines HW, Cockburn AF (1992) Theor Appl Genet 84:560 Dunahay TG (1993) Bio Techniques 15:452
42
Jeffrey F.D. Dean et al.
219. Frame BR, Drayton PR, Bagnall SV, Lewnau CJ, Bullock WP, Wilson HM, Dunwell JM, Thompson JA, Wang K (1994) Plant J 6:941 220. Guerineau, Mullineaux (1993) In: Croy RRD (ed) Plant molecular biology labfax. BIOS, Oxford, p 121 221. Fraley RT, Rogers SG, Horsch RB, Sanders PR, Flick JS, Adals SP, Bittner ML, Brand LA, Fink CL, Fry JS, Galluppi GR, Goldberg SB, Hoffman NL, Woo SC (1983) Proc Natl Acad Sci USA 80:4803 222. Waldron C, Murphy EB, Roberts JL, Gustafson GD, Armour SL, Malcolm SK (1985) Plant Mol Biol 5:103 223. Hayford M, Medford J, Hoffman N, Rogers SG, Klee H (1988) Plant Physiol 86:1216 224. Carter H, Staub JM, Maliga P (1991) Plant Mol Biol 17:301 225. Hille J, Verheggen F, Roelvink P, Franssen H, VanKammen A, Zabel P (1986) Plant Mol Biol 7:171 226. De Block M, Botterman J, Nandewiele M, Docks J, Thoen C, Gossele V, Rao Movva N, Thompson C, Van Montagu M, Leemans J (1987) EMBO J 6:2513 227. Comai L, Facciotti D, Hiatt WR, Thompson G, Rose RE, Stalker DM (1985) Nature 317:741 228. Haughn GW, Smith J, Mazur B, Somerville CR (1988) Mol Gen Genet 211:266 229. Stalker DM, McBride KE, Malyj LD (1988) Science 242:419 230. Herrera-Estrell L, Depicker A, Van Montagu M, Schell J (1983) Nature 303:209 231. Jefferson RA, Kavanagh TA, Bevan MW (1987) EMBO J 6:3901 232. Chalfie M, Tu Y, Euskirchen G, Ward WW, Prasher DC (1994) Science 263:802 233. Delagrave S, Hawtin RE, Silva CM, Yang MM, Youvan DC (1995) Bio-Technology 13:151 234. Sheen J, Hwang SB, Niwa Y, Kobayashi H, Galbraith DW (1995) Plant J 8:777 235. Niedz RP, Sussman MR, Satterlee JS (1995) Plant Cell Rep 14:403 236. Chalfie M (1995) Photochem Photobiol 62:651 237. Timmis R, Trotter PC (1989) In: Dhawan V (ed) Applications of biotechnology in forestry and agriculture. Plenum, New York, p 349 238. Campbell MM, Sederoff RR (1996) Plant Physiol 110:3 239. Halpin C, Knight ME, Foxon GA, Campbell MM, Boudet AM, Boon J J, Chabbert B, Tollier MT, Schuch W (1994) Plant J 6:339 240. Hibino T, Takabe K, Kawazu T, Shibata D, Higuchi T (1995) Biosci Biotech Biochem 59:929 241. Dwivedi UN, Campbell WH, Yu J, Datla RSS, Bugos RC, Chiang VL, Podila GK (1994) Plant Mol Biol 26:61 242. Ni WT, Paiva NL, Dixon RA (1994) Transgenic Res 3:120 243. Atanassova R, Favet N, Martz F, Chabbert B, Tollier MT, Monties B, Fritig B, Legrand M (1995) Plant J 8:465 244. Vignols F, Rigau J, Tortes MA, Capellades M, Puigdomenech P (1995) Plant Cell 7:407 245. Chapple CCS, Vogt T, Ellis BE, Somerville CR (1992) Plant Cell 4:1413 246. Chapple CCS (1995) Plant Physiol 108:875 247. Leinhos V, Udagamarandeniya PV, Savidge RA (1994) Phytochemistry 37:311 248. Dharmawardhana DP, Ellis BE, Carlson JE (1995) Plant Physiol 107:331 249. Liu TTY, Lagrimini LM, Cbabbert B, Monties B (1993) Plant Physiol 102:103 250. LaFayette P, Merkle SA, Eriksson K-EL, Dean JFD (1994) In: Michler CH, Becwar MR, Cullen D, Nance WL, Sederoff RR, Slavicek JM (eds) 2nd International Symposium on Applications of Biotechnology to Tree Culture, Protection and Utilization, 2 6 Oct 1994 (US Forest Service General Technical report NC-175) Minneapolis, Minn. 251. Eriksson K-EL, LaFayette PR, Merkle SA, Dean JFD (1995) In: 6th International Conference on Biotechnology in the Pulp and Paper Industry, 11 15 June 1995, Vienna, Austria 252. Strauss SH, Rottmann WH, Brunner AM, Sheppard LA (1995) Mol Breeding 1:5 253. Mariani C, De Beuckeleer M, Truettner J, Leemans J, Goldberg RB (1990) Nature 347:737 254. Goldberg RB, Beals TP, Sanders PM (1993) Plant Cell 5:1217 255. Mandel MA, Yanofsky MF (1995) Nature 377:522 256. Weigel D, Nilsson O (1995) Nature 377:495 257. Donahue RA, Davis TD, Michler CH, Riemenschneider DE, Carter DR, Marquardt PE, Sankhla N, Sankhla D, Haissig BE, Isebrands JG (1994) Can J For Res 24:2377 258. Padgette SR, della-Cioppa G, Shah DM, Fraley RT, Kishore GM (1989) Cell Cult Som Cell Genet Plants 6:441 259. Devillard C (1992) CRAS 314:291 260. Cabreraponce JL, Vegasgarcia A, Herreraestrella L (1995) Plant Cell Rep 15:1
Forest Tree Biotechnology 261. 262. 263. 264. 265. 266. 267. 268. 269. 270. 271. 272. 273. 274. 275. 276. 277. 278. 279. 280. 281. 282. 283. 284. 285. 286. 287. 288. 289. 290. 291. 292. 293. 294. 295. 296. 297. 298. 299. 300. 301. 302. 303. 304.
43
Campbell RA, Howard CA (1993) Can J For Res 23:2204 Lacey LA, Goettel MS (1995) Entornophaga 40:3 H6fte H, Whiteley HR (1989) Microbiol Rev 53:242 Beegle CC, Yamamoto T (1992) Can Entomol 124:587 Gill SS, Cowles EA, Pietrantonio PV, (1992) Annu Rev Entomol 37:615 Sundaram A (1995) ACS Symp Ser 595:108 Addison JA (1993) Can J For Res 23:2329 FischoffDA, Bowdish KS, Perlak FJ, Marrone PG, McCormick SM, Niedermeyer JG, Dean DA, Kusano-Kretzmer K, Mayer EJ, Rochester DE, Rogers SG, Fraley RT (1987) Bio/Technology 5:807 Vaeck M, Reynaerts A, H6fte H, Jansens S, DeBeuckeleer M, Dean C, Zabeau M, Van Montagu M, Leemans J (1987) Nature 328:33 McCown BH, McCabe DE, Russell DR, Robinson DJ, Barton KA, Raffa KF (1991) Plant Cell Rep 9:590 Robinson DJ, McCown BH, Raffa KF (1994) Environ Entomol 23:1030 Kleiner KW, Ellis DD, McCown BH, Raffa KF (1995) Environ Entomol 24:1358 Tabashnik BE (1994) Annu Rev Entomol 39:47 Tabashnik BE (1994) Proc Roy Soc Lond B 255:7 Boulter D (1993) Phytochemistry 34:1453 Hilder VA, Gatehouse AMR, Sheerman SE, Barker RF, Boulter D (1987) Nature 330:160 Leple JC, Bonadebottino M, Augustin S, Pilate G, Letan VD, Delplanque A, Cornu D, Jouanin L (1995) Mol Breed 1:319 Fitch MMM, Manshardt RM, Gonsalves D, Slightom JL, Sanford JC (1992) Bio/Technology 10:1466 Machado MLD, Machado AD, Hanzer V, Weiss H, Regner F, Steinkellner H, Mattanovich D, Plail R, Knapp E, Kalthoff B, Katinger H (1992) Plant Cell Rep 11:25 Cornelissen BJC, Melchers LS (1993) Plant Physiol 101:709 Strittmatter G, Janssens J, Opsomer C, Batterman J (1995) Bio/Technology 13:1085 Klee H, Horsch RB, Hinchee MA, Hein MB, Hoffman NL (1987) Genes Develop 1:86 Tuominen H, Sitbon F, Jacobsson C, Sandberg G, Olsson O, Sundberg B (1995) Plant Physiol 109:1179 Cunningham SD, Berti WR, Huang JWW (1995) Trend Biotechnol 13:393 Salt DE, Blaylock M, Kumar NPBA, Dushenkov V, Ensley BD, Chet I, Raskin I (1995) Bio/Technology 13:468 Schnoor JL, Licht LA, McCutcheon SC, Wolfe NL, Carreira LH (1995) Environ Sci Technol 29:A318 Cunningham SD, Ow DW (1996) Plant Physiol 110:715 Raskin I (1996) Proc Natl Acad Sci USA 93:3164 Stomp AM, Han KH, Wilbert S, Gordon MP (1993) In Vitro Cell Develop Biol Plant 29P: 227 Gould F (1988) BioScience 38:26 Pimentel D, Hunter MS, LaGro JA, Efroymson RA, Landers JC, Mervis FT, McCarthy CA, Boyd AE (1989) BioScience 39:606 Scheflter JA, Dale PJ (1994) Transgenic Res 3:263 Raffa KF (1989) BioScience 39:524 Dale PJ, Irwin JA, ScheMer JA (1993) Plant Breed 111:1 Levin MA, Strauss HS (1993) Risk assessment in genetic engineering. McGraw-Hill, New York Raybould AF, Gray AJ (1993) J Appl Ecol 30:199 Wohrmann K, Tomiuk J (eds) (1993) Transgenic organisms: risk assessment of deliberate release. Birkhauser u Basel Burke T, Seidler R, Smith H (1994) Mol Evol 3:1 Sawahel WA (1994) World J Microbiol Biotechnol 10:139 Tanksley SD, Orton TJ (eds) (1983) Isozymes in plant genetics and breeding, part B. Elsevier, Amsterdam. E1-Kassaby YA (1991) In: Fineschi S, Maltovi ME, Cannata F, Hattemer HH (eds) Biochemical markers in population genetics of forest trees. SPB, The Hague, p 61 Hamrick JL, Godt MJW (1990) In: Brown AHD, Clegg MT, Kahler AL, Weir BS (eds) Plant population genetics, breeding and genetic resources. Sinauer, Sunderland, Mass., p 43 Rafalski JA, Tingey SV (1993) Trends Genet 9:275 Neale DB, Devey ME, Jermstad KD, Ahuja MR, Alosi MC, Marshall KA (1992) New Forests 6:391
44
Jeffrey F.D. Dean et al.
305. Botstein D, White RL, Skolnick M, Davis RW (1980) Am J Hum Genet 32:641 306. Landry BS, Michelmore RW (1987) In: Bruening G, Harada J, Hollaender A (eds) Tailoring genes for crop improvement. Plenum Press, New York, p 25 307. Tanksley SD, Bernatzky R, Lapitan NL, Prince LP (1988) In: Gustafson JP, Appels R (eds) Chromosome structure and function. Plenum Press, New York, p 157 308. Kochert G (1994) In: Phillips RL, Vasil IK (eds) DNA-based markers in plants. Kluwer, Dordrecht, p 8 309. Ishii T, Panaud O, Brar DS, Khush GS (1990) Plant Mol Biol Rep 8:167 310. Williams JGK, Kubelik AR, Livak K J, Rafalski JA, Tingey SV (1990) Nucl Acids Res 18:6531 311. Welsh J, McClelland M (1990) Nucleic Acids Res 18:7213 312. Garner HR, Armstrong B, Lininger DM (1993) BioTechniques 14:112 313. Tulsieram LK, Glaubitz JC, Kiss G, Carlson JE (1992) Biotechnology 10:686 314. Michelmore RW, Paran I, Kesseli RV (1991) Proc Natl Acad Sci USA 88:9828 315. Tautz D (1989) Nucleic Acids Res 17:6463 316. Weber JL, May PE (1989) Am J Hum Genet 44:388 317. Litt M, Luty JA (1989) Am J Human Genet 44:397 318. Vos P de, Hogers R, Bleeker M, Reijans M, Vandelee T, Hornes M, Frijters A, Pot J, Peleman J, Kuiper M, Zabeau M (1995) Nucleic Acids Res 23:4407 319. Ciffarelli RA, Gallitelli M, Cellini F (1995) Nucleic Acids Res 23:3802 320. Richardson T, Cato S, Ramser J, Kahl G, Weising K (1995) Nucleic Acids Res 23:3798 321. Young ND (1994) In: Phillips RL, Vasil IK (eds) DNA-based markers in plants. Kluwer, Dordrecht, p 39 322. Strauss SH, Lande R, Namkoong G (1992) Can J For Res 22:1050 323. O'Malley DM, Grattapaglia D, Chaparro JX, Wilcox PL, Amerson HV, Liu BH, Whetten R, McKeand S, Kuhlman EG, McCord S, Crane B, Sederoff R (1996) In: Gustafson P (ed) 22nd Stadler Symposium. University of Missouri Press, Columbia, Mo. (in press) 324. Grattapaglia D, Sederoff R (1994) Genetics 137:1121 325. Plomion C, O'Malley DM, Durel CE (1995) Theor Appl Gen 90:1028 326. Nelson CD, Kubisiak TL, Stine M, Nance WL (1994) Heredity 85:433 327. Binelli G, Bucci G (1994) Theor Appl Gen 88:283 328. Nelson CD, Nance WL, Doudrick RL (1993) Theor Appl Gen 87:145 329. Devey ME, Jermstad KD, Tauer CG, Neale DB (1991) Theor Appl Gen 83:238 330. Devey ME, Groover AT, Jermstad KD, Neale DB, Ahuja MR (1994) Theor Appl Gen 88:279 331. Byrne M, Murrell JC, Allen B, Moran G F (1995) Theor Appl Gen 91:869 332. Grattapaglia D, Bertolucci FL, Sederoff RR (1995) Theor Appl Genet 90:933 333. Chaparro JX, Werner DJ, Omalley D, Sederoff RR (1994) Theor Appl Gen 87:805 334. Williams CG, Neale DB (1992) Can J For Res 22:1009 335. Groover A, Devey M, Fiddler T, Lee J, Megraw R, Mitchelolds T, Sherman B, Vujcic S, Williams C, Neale D (1994) Genetics 138:1293 336. Kubisiak TL, Nelson CD, Nance WL, Stine M (1995) Theor Appl Gen 90:1119 337. Bradshaw HD, Stettler RF (1995) Genetics 139:963 338. Villar M, Lefevre F, Bradshaw HD, Ducros ET (1996) Genetics 143:531 339. Devey ME, Delfinomix A, Kinloch BB, Neale DB (1995) Proc Natl Acad Sci USA 92:2066 340, Wilcox PL, Amerson HV, Kuhlman EG, Liu BH, O'Malley DM, Sederoff RR (1996) Proc Natl Acad Sci USA 93:3859 341. Lehner A, Campbell MA, Wheeler NC, Poykko T, Glossl J, Krieke J, Neale DB (1995) Theor Appl Gen 91:1092 342. Benet H, Guries RP, Boury S, Smalley EB (1995) Theor Appl Gen 90:1068 343. Koller B, Gianfranceshi L, Seglias N, McDermott J, Gessle C (1994) Plant Mol Biol 26:597 344. Nesbitt KA, Potts BM, Vaillancourt RE, West AK, Reid JB (1995) Heredity 74:628 345. Yeh FC, Chong DKX, Yang RC (1995) J. Heredity 86:454 346. Chase M, Kesseli R, Bawa K (1996) Am J Bot 83:51 347. Akerman S, Tammisola J, Lapinjoki SP, Soderlund H, Kauppinen V, Vihera-Aarnio A, Regina M, Hagqvist R (1995) Can J For Res 25:1070 348. Heinze B, Schmidt J (1995) Euphytica 85:341 349. Heinz B, Westcott R, Schmidt J (1996) New Forests 11:173 350. Pooler MR, Scorza R (1995) Sci Hort 64:233 351. Vandeven WTG, McNicol RJ (1995) Heredity 75:126 352. Khasa PD, Dancik BP (1996) Theor Appl Gen 92:46
Microorganisms and Enzymes Involved in the Degradation of Plant Fiber Cell Walls Ramesh Chander Kuhad 1, Ajay Singh 2, and Karl-Erik L. Eriksson 3 Department of Microbiology, University of Delhi South Campus, BenitoJuarez Road, New Delhi-ll0021, India 2 Department of Biology, University of Waterloo, Ontario, Canada N2L 3G1 3 Center for Biological Resource Recovery, Department of Biochemistry and Molecular Biology, University of Georgia, Athens, GA 30602-7229, USA
1 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Composition of W o o d and Other Plant Fibers . . . . . . . . . . . . . . . . . . . . . . 1.2 Structure and Composition of Wood and Other Plant Cell Walls . . . . . . . . . . . 1.2.1 The Cellulose C o m p o n e n t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.2 The Hemicellulose Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.3 The Lignin C o m p o n e n t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.4 Cell Wall Proteins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.5 Other Cell Wall Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Microorganisms and Their Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Microorganisms Involved in the Degradation of Lignocellulosic Materials . . . . . . 2.1.1 Fungi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.2 Bacteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Enzymes Involved in the Degradation of Plant Fiber Cell Wall C o m p o n e n t s . . . . 3 Degradation of Cellulose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Microorganisms Producing Cellulose-Degrading Enzymes . . . . . . . . . . . . . . . 3.2 Cellulolytic Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1 Regulation of Cellulase Production . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.2 Molecular Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.3 Cellulases are Organized in D o m a i n s . . . . . . . . . . . . . . . . . . . . . . . . 3.2.4 Catalytic Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Assay of Cellulolytic Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Possibilities for Biotechnology Based on Cellulolytic Enzymes . . . . . . . . . . . . . 4 Degradation of Hemicelluloses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Microorganisms Producing Hemicellulose-Degrading Enzymes . . . . . . . . . . . . 4.2 Hemicellulolytic Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.1 Xylan-Degrading Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.2 M a n n a n - D e g r a d i n g Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Assay of Hemicellulose-Degrading Enzymes . . . . . . . . . . . . . . . . . . . . . . . . 4.4 Possibilities for Biotechnology Based on Hemicellulolytic Enzymes . . . . . . . . . . 5 Degrad ation of Lignin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Microorganisms Involved in Lignin D e g r a d a t i o n . . . . . . . . . . . . . . . . . . . . . 5.2 Ligninolytic Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2.1 Lignin Peroxidase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2.2 Manganese Peroxidase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2.3 Laccase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2.4 HzOz-Producing Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2.5 Oxidoreductases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Assay of Ligninolytic Enzymes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,4 Possibilities for Biotechnology Based on Ligninolytic Enzymes . . . . . . . . . . . . 6 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47 47 48 51 52 53 55 55 56 56 56 60 61 63 63 67 67 69 73 76 78 80 84 84 85 86 91 93 94 97 97 100 101 102 104 105 106 107 108 111
Advancesin BiochemicalEngineering/ Biotechnology,Vol. 57 ManagingEditor: T. Scheper 9 Springer-VerlagBerlinHeidelberg1997
46
R.C. Kuhad et al.
One of natures most important biological processes is the degradation oflignocellulosic materials to carbon dioxide, water and humic substances. This implies possibilities to use biotechnology in the pulp and paper industry and consequently, the use of microorganisms and their enzymes to replace or supplement chemical methods is gaining interest. This chapter describes the structure of wood and the main wood components, cellulose, hemicelluloses and lignins. The enzyme and enzyme mechanisms used by fungi and bacteria to modify and degrade these components are described in detail. Techniques for how to assay for these enzyme activities are also described. The possibilities for biotechnology in the pulp and paper industry and other fiber utilizing industries based on these enzymes are discussed.
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
47
1 Background Because of growing consumer demand for environmentally safe processes and products faced with market and legislative pressures, the pulp and paper industry is modifying its pulping, bleaching and effluent treatment technologies to reduce the environmental impact. However, new approaches to pulp and paper manufacture are rare because of technical and economical constraints [1]. Biotechnology has received increasing attention during the past two decades because of its commercial potential in many fields. The virtue of biotechnology lies in its potential for more specific reactions, to provide less environmentally deleterious processes, to save energy, and to be used where non-biological processes are impractical. The raw material in the forest product industries is wood and its components. Thus, possibilities for employing biotechnology in these industries must be numerous since one of nature's most important biological processes is the degradation of lignocellulosic materials to carbon dioxide, water, and humic substances. Consequently, the use of microorganisms and their enzymes to replace or supplement older chemical methods in the pulp and paper industry is gaining interest. The accessibility of enzymes to wood and fibers is limited due to factors such as adsorption to surface areas, low fiber porosity, and low median pore size of fibers [1]. In addition, the molecular organization of the different components of the plant fiber cell wall, i.e. cellulose, hemicellulose, and lignin, which are jointly termed the lignocellulose complex, also limits the accessibility of microorganisms and their enzymes to wood and its fiber components. Thus, the proper and useful application of microorganisms and their enzymes in improving pulp and paper production processes requires a more complete understanding of the molecular architecture of the substrates, mechanisms of enzyme action, and methods for the study of the specific degradation of each component of the fiber cell wall. This article reviews the composition of wood and other plant fibers, microorganisms, and their enzymes involved in the degradation of wood and its components cellulose, hemicellulose, and lignin, techniques for the assay of enzymes modifying and degrading these components, and the possibilities for biotechnology based on these enzymes.
1.1 Composition of Wood and Other Plant Fibers Lignocellulosics in the form of wood and agricultural residues are virtually inexhaustible, since their production is based on the photosynthetic processes. They account for more than 60% of total biomass produced. The net photosynthetic production of the dry biomass by plants on earth has been estimated to be 155 billion tons per year [2]. Regardless of source, lignocellulosic materials contain cellulose, hemicellulose and lignin as major components. Table 1 shows
48
R.C. Kuhad et al.
Table 1. Composition of some wood and agricultural lignocellulosic residues Residue
% Dry weight Hexosans
Pentosans
Lignin
Ash
Hardwoods Aspen Beech Birch Cottonwood Oak Poplar Red maple
50 47 41 46 48 45 39
28 20 26 19 18 19 33
15 23 25 24 28 20 23
0.3 0.2 1.0 0.6 0.4 0.1 1.0
Softwoods Douglas fir Eastern hemlock Jack pine White pine Red spruce White spruce
57 43 41 44 43 44
8 10 10 11 12 I0
24 32 27 28 27 27
0.4 0.4 0.1 0.1 0.2 0.3
Agricultural Residues Bagasse Barley straw Corn cob Cotton stalks Groundnut shells Oat straw Rice straw Rye straw Wheat straw
33 40 42 42 38 41 32 37 30
30 20 39 12 36 16 24 30 24
29 15 14 15 16 11 13 19 18
4 11 2 6 5 12 18 4 10
the composition of several hardwoods, softwoods and agricultural residues. The compositions of hardwoods and softwoods are significantly different. The lignin content of softwood is generally higher than that of hardwoods, whereas the hemicellulose content of hardwoods is higher than that of softwoods. With a few exceptions, straw species are more uniform in composition than wood species. Generally straws have lower cellulose content than wood, but, in spite of this, the holocellulose (cellulose + hemicellulose) fraction is approximately equal to that of wood.
1.2 Structure and Composition of Wood and Other Plant Cell Walls W o o d is m a d e u p o f cells o r fibers. A m a t u r e tree s t e m h a s a n o u t e r m o s t l a y e r o f b a r k ( p h l o e m ) s e p a r a t e d f r o m t h e w o o d (xylem) b y a t h i n layer, t h e c a m b i u m . T h e c a m b i u m is t h e l a y e r w h e r e t r a c h e i d s ( w o o d fibers) a r e p r o d u c e d [3]. T h e fibers a r e p r o d u c e d in a n a q u e o u s e n v i r o n m e n t a n d exist in a l i v i n g t r e e in a m a x i m a l l y s w o l l e n state. T h e g r o w i n g tree f o r m s l a r g e d i a m e t e r t h i n - w a l l e d
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
49
fibers in the early part of the growing season, small diameter thick-walled fibers in the late growing season. Thin-walled early wood fibers are much more flexible than the thick-walled late wood fibers. Wood is a porous material consisting of a matrix of fiber walls and air space. The air space exists mostly in the form of fiber cavities (lumens) and to a much lesser extent as voids within fiber walls. The wood fiber wall has three major constituents: cellulose, hemicelluloses, and lignin. Juvenile wood, heartwood/sapwood proportion, wood density, and fiber length are the wood quality attributes important to the pulp and paper industry. Among these, fiber length is of particular importance in pulp and paper quality. Wood is classified in two major groups: softwoods, i.e., gymnosperms (pine, spruce, larch, etc.) and hardwoods, i.e., angiosperms (birch, aspen, beech, maple, oak, etc.). They differ considerably in cell type. Softwoods have mainly two types of cells, the long (2-5 mm) tracheids, which give strength to the wood and are responsible for vertical water transport, and the smaller ray cells, which transport water in the horizontal direction. In addition, there are resin channels in both horizontal and vertical directions [3]. Softwood tracheids are connected by bordered pits [-4]. Hardwoods possess more diverse types of cells. In general, the annual growth ring of hardwoods is composed of an array of vessels, fibers, and ray parenchyma cells in various arrangements. These cells provide for water conduction, strength support, and transport and storage of nutrients. The thickwalled fiber tracheids and libriform fibers (fiber length 0.64-2.30mm) are located around the vessels and are connected to other cells via bordered or simple pits [4]. Vessels are thin and short (0.03-0.13 ram), but when located on top of each other they form tubes up to several meters in length. These vessels are more effective for water transport than the softwood tracheids [3]. Each tracheid cell is initially surrounded by a primary cell wall low in lignin content. As growth progresses, a secondary cell wall, into which lignin is successively incorporated, develops centripetally to the primary wall. The secondary wall constitutes the largest proportion of the total cell wall, and most of cell wall lignin (60-80%) is located here [-5-9]. Lignification is always preceded by deposition of cell wall polysaccharides, and polymerization of monolignols occurs within the carbohydrate gel. However, the type of carbohydrate changes during the course of cell wall development, i.e., the formation of cell wall layers [10]. A model illustrating the arrangement of lignin, hemicellulose, and cellulose within the cell wall has been proposed by Kerr and Goring [11]. Terashima and Fukushima [10] have schematically pictured the deposition of cell wall components and their irreversible assembly to form a lignified cell wall in tree xylem (Fig. 1). Every supporting cell (dead) has a lumen, which can be more or less empty or filled with water. In all softwoods and many hardwoods, the inner or warty layer is a heterogenous mixture of components of unknown composition. The secondary cell wall outside the warty layer is made up of three layers, $1, $2, and $3, with $3 closest to the lumen, Sz the middle layer, and $1 the outermost layer.
50
R.C. Kuhad et al. Cambium Deposition of celt walt components 9ML,CC-" ( Laps of time )
Formation of cell wall layers
w p --.. -S1--
w
, ,~Mature cell wall
52-" ~S3~
Deposition of carbohydrates
Deposition of [lgnin and type of monolignol
/Gymnosperm Monomer / composition |
Tracheid
. and . ~ Angiosperm condensation I Vessel
, Pectic substances ------ Arabinogalactan 1Xylan - - MannQn Ceilulo'~e
'
Llgnin , p-Coumary| alcohol 1 Conlferyl alcohol ~ G $1napyt alcohol H ~ ' ~ I ~ S ~ I~176
{ ;C 7.,ML ~ SW
{ CCML H
~ H
_
.
~
r
~ ~
,
_
~
i[Ageing .!! 'I 1
~
condensation
: I
I
Fig. 1. Schematic representation of the process of deposition of cell wall components and the middle lamella in gymnosperms and angiosperms. M L middle lamella, CC cell corner, P primary wall, C M L compound middle lamella, $1 outer, $2 middle, and $3 inner layer of secondary wall, H, G, and S, p-hydoxy-, guaiacyl-, and syringyl-propane units [10]
These layers consist of cellulose microfibrils embedded in an amorphous mixture of different hemicelluloses and lignin. The microfibrils form helices around the cell with different angles and directions for the different layers. The Sz layer is the thickest (1-5 gm) and the $3 layer the thinnest (0.1 gm). The width of $1 layers varies from 0.2-0.3 gm [3] It is important to note that cellulose, hemicelluloses, and lignin are present in each layer of the cell wall. The concentration of cellulose is highest in sub-layer $2 and decreases toward the middle lamella, where it is present only in small amounts. The $3 layer is rich in hemicelluloses, while lignin is the dominant compound in middle lamellae [12]. While lignin concentration is high in the middle lamella, this layer is extremely thin, and most of the lignin is in the secondary wall. Straw is a much more heterogenous material than wood. However, cell wall structures of straws have been less studied than wood fiber walls. Straw fibers, principally derived from cells and internodes, are fairly long and slender with sharply pointed ends. In addition to fibers, straw contains short nonfibrous tissues consisting of epidermal cells, platelets, serrated cells, and spirals which are derived from the pitch, nodes, chaffs, and rachises. While 96% of softwood cells may be considered as fibers, only about 35-39% of the cells in straw are fibers [12].
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
51
1.2.1 The Cellulose Component Cellulose is considered to be a linear homopolymer of hydroglucose units linked with [3-1,4-glucosidic units, although the true repeating stereochemical unit of cellulose is cellobiose ([3-1,4-D-glucosyl-D-glucose) [13]. Glucose and cellodextrins are the products when cellulose is hydrolyzed. Some natural materials, e.g., cotton, are almost pure cellulose. Cotton is mostly a-cellulose, the form of cellulose insoluble in 17.5% NaOH. Wood and other plant celluloses generally contain [3-cellulose as well, a material soluble in the above NaOH solution. The and [3 forms of cellulose also differ in their intermolecular hydrogen bonding patterns. The cellulose molecule is a polymer with a degree of polymerization (DP) of up to about 15 000. However, DPs as high as 25 000 have been reported for the algae Valonia. The cellulose molecule is thread-like, existing as bundles of molecules forming fibrils stabilized laterally by hydrogen bonds between hydroxyl groups of adjacent chains. The arrangement of cellulose molecules in the fibrillar bundles is so regular that cellulose has a crystalline X-ray diffraction pattern. The individual cellulose chains are packed in groups of about 30 to form elementary fibrils (microfibrils), approximately 100 of which are packed to form fibrils. These fibrils are further packed to form the cellulose fiber [14]. The microfibril has been considered to be stronger than steel of corresponding size and thus significantly contributes to the strength of wood [15]. Cellulose is known to exist in four structures (cellulose I-IV) as revealed by X-ray diffraction patterns [16, 17]. Cellulose I is the native form of cellulose in the secondary cell wall. Cellulose I can be converted into types II and III by chemical or physical treatment. The transition from cellulose I to cellulose II is irreversible. Cellulose II may, however, be the thermodynamically most stable form. Cellulose IV, the dominant structure in the primary cell wall, is believed to have a form similar to but more disordered than that of cellulose I. Cellulose I can be transformed to cellulose IV via cellulose III [-18-20]. In cellulose I the chains are arranged partially in flat sheets. These sheets are thought to be kept together by van der Waals forces, hydrophobic interactions, and interchain hydrogen bonds. The degree of crystallinity of cellulose depends very much on origin and type of pretreatment. It may vary from 0% (amorphous and acid-swollen cellulose) to approximately 100% (cellulose from Valonia macrophysa) [21]. The degree of crystallinity of cotton cellulose is about 70%, while the figures vary from 30 to 70% for most other commercial celluloses [22]. However, the crystalline forms of cellulose are still not completely understood. Crystalline cellulose is highly resistant to microbial attack and enzymatic hydrolysis, whereas amorphous cellulose is degraded at a much faster rate [23]. As its crystallinity increases, cellulose becomes increasingly resistant to further hydrolysis.
52
R.C. Kuhad et al.
1.2.2 The HemicelIulose Components Hemicelluloses are easily hydrolyzed [24] short chains of branched heteropolysaccharides composed of both hexoses and pentoses. D-Xylose and L-arabinose are the major constituents of the pentosans (xylans), while D-glucose, D-galactose, and D-mannose are the constituents of the hexosans (mannans). The major hemicellulose components in softwood are mannan-based, and those in hardwood xylan-based. The close association of the hemicelluloses with cellulose and lignin in the fiber cell walls contributes both to rigidity and flexibility. Hemicelluloses are composed both of neutral sugars, all present as their respective anhydrides, i.e. xylan, araban, glucan, galactan, and mannan (substituted with acetyl groups) and of uronic acids. Hemicelluloses constitute on average about 26% of hardwood, 22% of softwood, and 30% of various agricultural residues [25-28]. They usually have DPs of 100 to 200. Apart from galactose-based hemicelluloses, which are characterized by 13-1,3-1inkages, most of the hemicelluloses are built up by ~-l,4-1inkages between their backbone sugars. Besides wood, hemicelluloses are also found in grasses, cereals, and some very primitive plants [24]. The type and amount of hemicellulose varies widely, depending on plant materials, type of tissues, growth stage, growth conditions, storage, and method of extraction [29-31]. The mannan hemicelluloses, galactoglucomannans and glucomannans in softwoods and hardwoods, are both branched heteropolysaccharides. At least two galactoglucomannans, often termed "glucomannans" with different sugar ratios are predominant in softwoods. The less soluble polysaccharide and the major (water-soluble) polysaccharide, consist of galactose: glucose: mannose in the ratio of 0.1 : 1 : 3 and 1 : 1 : 3, respectively. Their backbones are built up of 1,4-1inked [3-D-glucopyranose and 13-D-mannopyranose units, largely distributed at random. The mannose and glucose units in the backbone are partially substituted in C-2 and C-3 positions by acetyl groups, approximately 1 per 3-4 hexose units [23, 32]. Depending on the wood species, the glucose: mannose ratio has been reported to vary from 1 : 1 to 1 : 2. Galactose is not present in hardwood mannans [23, 32]. The major class of hemicelluloses is xylans, which are found in large quantities in annum plants and deciduous trees, and in smaller quantities in conifers. Xylans in grasses and cereals are generally characterized by the presence of L-arabinose linked as a single unit substituent to a D-xylose backbone. Substantial differences in substituents are found in wood xylans. These xylans are characterized by the presence of 4-O-methyl-D-glucuronic acid, L-arabinose, or acetyl groups as substituents on the D-xylose backbone. In general, the content of 4-O-methyl-D-glucuronic acid is higher in softwood than in hardwood. Unbranched linear xylan homopolysaccharides are rare [33]. Xylans comprise 15-30% of annual plants, 20-25% of hardwoods, and 7 12% of softwoods. Xylans appear to be a major interface between lignin and other carbohydrate components in many isolated phenolic-carbohydrate complexes [-34-38], where they are probably covalently linked to phenolic residues via the arabinosyl [39]
Microorganisms and EnzymesInvolvedin the Degradation of Plant Fiber Cell Walls
53
and/or glucuronosyl residues [-40]. Xylans tend to adsorb onto cellulose and to aggregate with other hemicellulosic components, probably as a result of hydrogen-bonding interactions [41, 42]. Xylan may play a major role in cell wall cohesion since its selective removal from delignified wood fiber results in a substantial increases in fiber porosity [43]. There have been observations which suggest that cellulose is protected from enzymatic attack by xylan and mannan [44, 45]. Naturally occurring hemicelluloses differ from isolated hemicelluloses. Besides impurities of other cell wall materials, isolated hemicelluloses are altered during oxidative delignification, which may lead to reduction in the chain length of the polysaccharides. The structure of xylan isolated from wood is dependent upon the type of polymer originally present in the wood and also on the pH of the cooking liquor used in pulping. In Kraft cooking, with its high pH, xylans or arabinoxylans are found in good yield dependent upon whether the wood contains 4-O-methylglucuronoxylan or arabino-4-O-methylglucuronoxylan. The Kraft process begins with extreme alkaline conditions which causes losses of hemicelluloses. Two-thirds of the glucomannans are dissolved very quickly and degraded by alkaline peeling reactions [46]. The peeling reaction in xylans is much slower than those occuring with cellulose or glucommannans because of the unique sequence of sugar units at the reducing end of xylans [46].
1.2.3 The Lignin Component Lignin is not a definite uniform compound, but is a collective form for substances that have similar chemical properties but very different molecular weights. The molecular weight of lignins may be 100 kDa or greater [47]. A considerable part of the photosynthetic activity in plants is devoted to the conversion of atmospheric carbon dioxide to lignin. Lignin is found in the highest concentration in the middle lamella, but is most abundant in the secondary walls of vascular plants [48]. It performs important functions in the life of plants as a permanent bonding agent between cells, making a wood composite material, and is a UV light stabilizer, antioxidant, and water-proofing agent. It also protects plants, wood in particular, from attack by microorganisms. The water permeation-reducing property of lignin plays an important role in the internal transport of water, nutrients, and metabolites in the plant. Lignins are highly branched polymeric molecules consisting of phenylpropane-based monomeric units linked together by different types of bonds, including alkyl-aryl, alkyl-alkyl, and aryl-aryl ether bonds. The relative proportions of three cinnamyl alcohol precursors incorporated into lignin, i.e., p-coumaryl alcohol, coniferyl alcohol, and sinapyl alcohol, vary not only with the plant species but also with the plant tissues and location of the lignins within the plant cell wall. Ecological factors such as age of the wood, climate, plant sustenance, and amount of sunlight also affect the chemical structure of lignins. A major problem in studying the chemistry of lignins has been the difficulty in
54
R.C. Kuhad et al.
isolating intact lignins from plant materials. The hydrolyzable linkages in lignins are suggested to be of two types: I]-aryl ether and 0~-aryl ether [49, 50]. The predominant [3-aryl ether type bond is more resistant to cleavage. Under mild hydrolytic conditions, the cleavage of the ether bond is exclusively restricted to the a-aryl ether type [51, 52]. In terms of physical properties, lignins are amorphous polymers that have no crystallinity. The amorphous nature of lignin has been studied using various techniques such as broad-line nuclear magnetic resonance, differential scanning calorimetry, viscoelasticity, and X-ray diffractometry [53]. The mode of polymerization during lignin biosynthesis makes it optically inactive. Lignins are insoluble in water and difficult for microorganisms to penetrate and degrade. They are generally acid stable but can be solubilized under alkaline conditions. Lignins are closely associated to cellulose and hemicelluloses in plant cell walls, and it has been shown that some hemicelluloses are linked by covalent bonds to lignin [54]. Recently, Joseleau et al. [33] have discussed covalent bonding between lignin and xylan. The best documented are ester linkages between glucuronoxylans and lignin via benzyl ester bonds with the carboxyl group of 4-O-methylglucuronic acid [40, 55, 56]. This bond is likely to be established between quinonemethide intermediates and D-glucuronic acid during the polymerization processes [57]. The second most reported covalent bonds between xylans and lignins are ether linkages involving the L-arabinose side chains [58] or xylose units [59, 60]. Lignin-xylan complexes have been isolated from hardwoods, while from softwoods both lignin-mannan and lignin-xylan complexes were obtained [54]. Several studies have suggested substituents of the backbone of the hemicelluloses, such as arabinose, galactose and 4-O-methylglucuronic acid, are the connecting links to lignin [61-63]. Possible links between hemicelluloses and lignins are demonstrated in Fig. 2. Lignin isolates from woody materials contain, beside carbohydrates, significant amounts of protein [64].
Fig. 2. Schematic representation of connections betweensoftwoodhemicellulosesand lignin [54]
Microorganisms and EnzymesInvolvedin the Degradation of Plant Fiber Cell Walls
55
1.2.4 Cell Wall Proteins
The plant cell wall contains, besides cellulose, hemicelluloses and lignins, structural proteins called extensins. Three kinds of cell wall proteins, which differ in amino acid composition, have been found in plants [65]. These are hydroxyproline-rich glycoproteins, glycine-rich proteins and proline-rich proteins [65, 66], all considered to be important structural components of plant cell walls. Recently Bao and co-workers [67] found an extensin-like protein in mature wood of loblolly pine (Pinus taeda L). These authors suggested that such structural proteins play important roles in the differentiation of xylem, and could thereby affect the properties of wood. However, the existence of lignin-protein complexes suggests a role for proteases in the degradation of woody and other plant materials, particularly in delignification processes such as pulp bleaching. Use of such enzymes might be beneficial for the improvement of pulp and paper manufacturing processes.
1.2.5 Other Cell Wall Components
Plant cell walls also contain extraneous materials, including extractives and non-extractives. Depending upon species, wood contains from 0.4 to 8.3% extractives on a dry weight basis, whereas agricultural residues may contain even greater amounts [68, 69]. The extractives can be broadly divided into three groups, i.e., terpenes, resins, and phenols. The terpenes can be regarded as isoprene polymers, with terpene alcohols and ketones as building blocks. The resins include a wide variety of non-volatile compounds, ineluding fatty acids, alcohols, resin acids, phytosterols, and some less known neutral compounds. The most important phenols are tannins, heartwood phenols, and related substances. In addition, low molecular weight carbohydrates, alkaloids, gums, and various other cytoplasmic constituents are present [70-73]. The non-extractives make up 0.2q18% of the dry weight and include inorganic components such as silica, carbonates, oxalates, and non-cell wall substances such as starch, pectin, and protein [69]. In agricultural residues, the non-extractives make up about 10% of the dry weight. Silica, deposited as crystals, is especially abundant in straw. In spite of the small quantity of extraneous materials their role is significant in that they provide an obstacle to the hydrolysis of cellulosic materials. Pectic substances (protopectin), though in small proportions, occur notably in the middle lamellae of the parenchymatous tissues, where they impart a structural function in binding and supporting cells.
56
R.C. Kuhad et al.
2 Microorganisms and their Enzymes 2.1 Microorganisms Involved in the Degradation o f Lignocellulosic Materials Wood and other lignocellulosic materials are degraded by a variety of fungi and bacteria. The structural architecture and chemical composition of wood play a significant role in its resistance to degradation by microorganisms.
2.1.1 Fungi Most of the fungi able to produce the necessary enzymes for the degradation of lignocellulosic materials belong to the Ascomycetes, Deuteromycetes, or Basidiomycetes groups. Fungi living on dead wood that preferentially degrade one or more of the wood components cause three types of wood rot, i.e., soft rot, brown rot and white rot [23, 74]. Important fungi causing soft-rot include Chaetomium cellulolyticum, Asper-
gillus niger, Trichoderma viride (reesei) , Fusarium oxysporum, Thielavia terrestris, Penicillium jenthillenum, Dactylomyces crustaceous and different species of Paecilomyces, Papulaspora, Monodictys, Allescheria, Hypoxylon, Xylaria, and Graphium [23, 75, 76]. They all efficiently attack wood carbohydrates but modify lignins only to a limited extent. A unique feature of soft-rot attack is the production of chains of biconical and cylindrical cavities within the secondary wall. This unusual microscopic pattern of decay in the $2 layer is characteristic of the soft-rot type of deterioration. Two patterns of soft-rot attack have been identified. One form of attack comprises cavities formed within the secondary cell wall, and the second form causes an erosion of the entire secondary wall originating from hyphae in cell lumina and progressing towards the middle lamella [77, 78]. The rate and extent of decay by soft-rot fungi depend on the type of wood they attack. In general, hardwoods are degraded to a greater extent than softwoods [79]. The ability of fungi to cause soft-rot attack of aromatic moieties of lignins has also been reported [79, 80]. However, they mainly cause demethylation of lignin and degrade the side chains and aromatic rings to a lesser extent. Fungi causing the brown-rot type of decay include Poria placenta, Tyromy-
ces balsemeus, Gloeophyllum trabeum, Lentinus lepidius, Lenzites trabeam, Coniophora puteana, Laetiporus sulphureus and Fomitopsis pinicola [23, 76, 81, 82]. These also exhibit preference for cellulose and hemicelluloses, lignins being degraded only to a limited extent. These fungi can cause rapid and extensive degradation of cellulose early in the decay process [23, 83]. The hyphae of brown-rot fungi are normally localized in the wood cell lumen and penetrate adjacent cells either through existing openings or by producing boreholes in wood cell walls. During the decay process, brown-rot fungi remove cell wall
Microorganisms and EnzymesInvolvedin the Degradation of Plant Fiber Cell Walls
57
substances first from the S 2 layer of the secondary wall, while the $3 layer, adjacent to the lumen, remains virtually unchanged. The $1 layer may also be attacked, but the primary wall and the middle lamella are very resistant because of their high lignin content [84]. Although hyphae are in direct contact with the S 3 layer, the ultrastructural changes are most obvious deep within the secondary wall. For a long time, involvement of brown-rot fungi in lignin degradation eluded clear demonstration. However, there is much evidence that brown-rot fungi can cause substantial degradation of lignins in wood [23, 85, 86]. The efficient demethylation of lignins or of simple lignin-related model compounds by G. trabeum has been reported. This fungus was also found to degrade [O14CH3]-labelled dimeric lignin model compounds in the presence of spruce sapwood relatively soon after inoculation compared to the white-rot fungus Phanerochaete chrysosporium [81]. In spite of the fact that brown-rot fungi primarily degrade wood carbohydrates, most of them are unable to degrade and utilize pure cellulose, particularly in submerged liquid cultures [87-89]. However, a few species, several of which are important degrades of forest products, do degrade pure cellulose [90] when in contact with inoculated pinewood blocks [87]. Lignified jute fibers were also found to be easily degraded by brown-rot fungi, whereas delignified ones were not [87]. Moreover, Highley [91] reported the degradation of cotton cellulose in contact with wood. It seems that the degradation of cellulose by brown-rot fungi is activated by the presence of lignin or lignin-like compounds [91]. It may be dependent upon prior or concomitant removal of the hemicellulose components [92, 93]. However, conclusive evidence does not yet exist that lignin activates the cellulolytic system of brown-rot fungi. Recently, the presence of spruce sapwood has been reported to greatly stimulate the demethoxylation of labelled lignin by brown-rot fungi [81]. This finding suggests that wood has some stimulatory effect on these fungi to utilize cellulose or lignin. A great deal of research seems to be necessary to establish the exact relationships. Brown-rot fungi differ substantially from white-rot fungi with respect to the cellulolytic enzymes produced and the pattern of cellulose degradation. The involvement of oxidative systems in the depolymerization of cellulose during the early stages of decay by brown rot has been demonstrated [88]. Considering that most of the pore sizes in sound wood are too small to allow cellulolytic enzymes to penetrate the wood, this might offer an advantage. A non-enzymatic hypothesis involving the generation of oxygen-derived radical species has been suggested to be involved in the initial attack on the cellulose polymer [94, 95]. However, this hypothesis has not been satisfactorily explored. White-rot fungi are the only wood-rotting fungi which, to any extent, can attack all the components of plant cell walls. The most studied fungi of this group are Phanerochaete chrysosporium, Trametes versicolor, Dichomitus squalens, Phlebia radiata, Heterobasidium annosum, Phellinus pini, C yathus stercoreus, Pleurotus ostreatus, Ceriporiopsis subvermispora, Polyporus anceps and Ustulina vulgaris [23, 96, 97]. Most of the fungi belong to Basidiomycetes except
58
R.C. Kuhad et al.
for Ustulina vulgaris, which is classified as an Ascomycete. The normal pattern of wood decay by these fungi involves simultaneous attack on both polysaccharides and lignin [23]. The ability of the white-rot group to efficiently remove lignin from wood makes them suitable for industrial applications where lignin or other phenolic compounds need to be modified or removed [23, 98]. Some white-rot fungi such as P. chrysosporium and T. versicolor have an unselective mode of wood degradation, i.e., they degrade cellulose, hemicellulose, and lignin simultaneously, while others such as Phlebia tremellosa, C. subvermispora and P. pini degrade the lignin component more selectively [99]. Some white-rot fungi have been reported to attack both selectively and non-selectively in different regions of the same piece of wood [100]. Several strains of P. chrysosporium and C. subvermispora degrade the different components of plant fiber cell walls with a different mode of attack and to a different extent [98]. The factors responsible for the different modes of degradation, i.e., a rather specific delignification or a simultaneous decay of lignin and carbohydrates, remain unexplained [23]. Dill and Kraepelin [101] suggested that environmental factors such as nitrogen concentrations in wood may be responsible in governing white-rot decay type. Also, white-rot fungi have a different production pattern with respect to the extracellular lignin-degrading enzymes - a trait likely to affect the degradation pattern [102]. White-rot fungi grow in all the different types of cells of hardwoods and softwoods. Fungal hyphae enter the cell lumen, first colonize the ray parenchyma cells, and then penetrate from cell to cell either via pits or by the development of boreholes directly through the cell walls [23, 84, 103]. Soon after the easily metabolizable nutrients are depleted, cell wall degradation starts. A separation between cells within or adjacent to the compound middle lamella has been reported both at early [103] and late [104] stages of wood decay. White-rot fungi that simultaneously attack cell wall components erode localized regions of cell wall layers, and these further extend through the secondary cell wall and middle lamella. The extensive erosion of cell walls and numerous holes in adjacent walls as later stages of decay have been observed in white-rot fungi that selectively degrade lignin. Lignin degradation by fungal hyphae in cell lumen progresses from the lumen edge of the secondary wall towards the middle lamella. Several reports suggest that white-rot fungi degrade lignin from the secondary wall before the middle lamellae between cells is degraded [105, 106]. The separation of cell occurs as a result of degradation of the middle lamella. It is well established that white-rot fungi often cause a progressive thinning of the cell walls, starting from the lumen and continuing towards the middle lamella [103, 107]. P. chrysosporium, when growing on aspen wood chips supplemented with nutrients, either produced boreholes or hyphae that entered and advanced through cell walls using natural wood pits [107, 108]. P. chrysosporium was frequently found to progress along the axis of vessels or fibers, with secreted enzymes etching the $3 and $2 layers [108, 109]. Likely, fungal decay
Microorganisms and EnzymesInvolvedin the Degradation of Plant Fiber Cell Walls
59
involves enzymatic softening and swelling of wood cell wall fibers as well as thinning and fragmentation of the wood cell walls. White-rot fungi produce an extracellular slime sheath around the hyphal cells which establishes close contact between hyphae and wood cell walls [110-112]. With the progress of the decay, the fibrillar slime materials become intrinsically associated with the swollen and delignified wood cell wall and form a connection between the fungal hyphae and wood substrates [113]. Several suggestions have been put forward for the roles of the fungal slime sheath. For example, studies have revealed the localization of lignin peroxidase and manganese peroxidase to be associated with the slime during decay of wood [113]. A more detailed investigation concerning the role of fungal slime would possibly contribute to the knowledge of mechanisms of wood attack by white-rot fungi. Recently, Akin et al. [72] studied the chemical and structural modifications of Bermuda grass (Cynodon dactylon) cell walls caused by the two white-rot fungi C. stercoreus and C. subvermispora. Both fungi were observed to extensively colonize the cut end of the stem section, disrupt the parenchyam cell walls, and partially degrade sclerenchyma cells. UV absorption microspectrophotometry indicated that ester-linked phenolic acids were totally removed from the parenchyma cell walls, and these cells were readily and completely degraded by both fungi. However, aromatic constituents were only partly removed from the recalcitrant sclerenchyma cell walls. For more extensive details about the various patterns of wood decay by white-rot fungi, readers are referred to Eriksson et al. [-23]. In addition to aerobic fungi, anaerobic fungi, inhabitants of the alimentary tract of herbivorous animals, play key roles in the degradation of plant cell wall material. Anaerobic fungi degrade the major structural polysaccharides, but cannot utilize the lignin moieties. Some anaerobic (rumen) fungi have the ability to solubilize small amounts of phenolic compounds [114-118]. These fungi colonize materials such as soybean hulls and grasses [119, 120]. Moreover, highly recalcitrant plant materials like mestome sheath of leaf blades [121] and palm press fibers and wood [-122] have been reported to be colonized by the anaerobic fungi. Among anaerobic fungi, the most studied are Neocallimastix frontalis, N. Patriciarum, Piromyces (Piromonas) communis, and Caecomyces (Sphaeromonas) communis [118, 123]. Electron microscopic studies have revealed that rumen fungi preferentially attach to specific regions of plant particles, i.e., the cut ends or stomata [124]. The fungal rhizoids readily invade the plant cell wall lumen and the middle lamellae between individual plant cell walls [14, 118]. Ho and co-workers [125] showed that some anaerobic fungi produced appressorial-like structures "penetration pet" which penetrated undamaged cell walls of guinea grass and rice straw. The fungal hyphae grow extensively and ramify throughout the interior of plant cell walls, which causes physical disruption of the cell wall [121]. Furthermore, Joblin [126] has also suggested the physical disruption of the plant fibers by Caecomyces spp. The ability of anaerobic fungi to disrupt plant tissues could well be attributed to their ability to produce an array of
60
R.C. Kuhad et al.
extracellular enzymes, i.e., cellulases, hemicellulases, proteases, amylases, phenolic acid esterases, and pectinases [120]. For more details about rumen fungi, the reader is referred to the excellent reviews by Weimer [,14], Wubah et al. [118] and Trinci et al. [120].
2.1.2 Bacteria Bacteria generally degrade wood slowly. Degradation takes place on wood surfaces with a high moisture content. Because of lack of penetrating ability, bacteria usually invade wood cells simultaneously with fungi. They appear to attack both softwoods and hardwoods by first colonizing the parenchyma cells. After utilizing the cell contents, they may also attack the parenchyma cell walls [73]. They move into adjacent cells and trachieds with fast disruption of pits [-127]. Although bacteria can directly attack fibers, vessels, and trachieds, few species or strains can degrade all the cell wall components [-23]. However, some bacteria have been found to degrade lignified wood cells, which was confirmed by ultrastructural investigations [128]. Cell wall erosion [129, 130], tunnel formation [131], and removal of lignin [132] by bacteria have also been reported. Different patterns of cell wall decay, cavitation, and tunneling by bacteria have been found both in natural and laboratory environments [131,133, 134]. In contrast, studies in some laboratories have shown that bacteria are unable to degrade lignified plant cell walls [135, 136], but they were able to do so after chemical pretreatment of the cells. Efficient bacterial degradation of wood already treated with cellulase-less mutants of P. chrysosporium and Phlebia 9igantea has been observed [137]. Rumen bacteria are major degraders of plant fiber cell walls by production of enzymes active against structural components of these cell walls [138]. Some of the most extensively studied rumen bacteria include Fibrobacter succinogenes, Ruminococcus albus, and R. flavifaciens. These bacteria have a complete set of polysaccharide-degrading enzymes and also the ability to adhere to fibers [138, 139]. These species adhere strongly to partially degraded cell walls, but erode the components only if they are adjacent and in direct contact with the bacteria. Often, the plant cell walls are totally degraded, but at other times digestion seems to be interrupted before the hydrolysis is completed. Some actinomycetes, the filamentous eubactria, also actively degrade lignocellulosic plant materials. Different species of Streptomyces have been reported to colonize vessels, fibers, and parenchyma cells [140]. S. flavovirens rapidly colonizes the phloem and degrades parenchyma cells as well as thickwalled, highly lignified sclereids [129]. In advanced stages of degradation, parenchyma cells were found to be completely destroyed, and sclereids showed evidence of eroded cell walls. Various studies have established that several actinomycetes attack grass lignocellulosics, leading to the partial solubilization of the substrate rather than to its mineralization [141]. Several species of
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
61
Streptomyces have the ability to degrade and remove lignin from softwood, hardwood, and graminaceous substrates [142, 143]. Streptomyces viridosporus oxidatively depolymerizes lignin as it degrades cellulose and hemicellulose components of plant residues [144]. Lignin degradation by actinomycetes is reviewed by Zimmerman [128], and the varying abilities of different species of Streptomyces to delignify lignocellulosics is discussed in detail.
2.2 Enzymes Involved in the Degradation of Plant Fiber Cell Wall Components Because of the complex nature of wood and other plant cell walls, a number of different enzymes are required to degrade the wall components. The generally accepted picture of enzymatic degradation of cellulose is that it proceeds by the synergistic action of at least three major types of hydrolytic enzymes. In addition, oxidative and phosphorolytic enzymes also participate in cellulose degradation in some organisms. The hydrolytic enzymes (Fig. 3) involved in degradation of native cellulose to glucose are: (1) endoglucanases (endo-l,4-[3D-glucan-4-glucanohydrolase, EC 3.2.1.4), which randomly attack the cellulose chains and split 1,4-[~-glycosidic linkages, (2) exoglucanases, generally cellobiohydrolases (exo-l,4-[3-D-glucan-4-cellobiohydrolase, EC 3.2.1.91), which release either cellobiose or, in some cases, glucose from the non-reducing end of cellulose, and (3) 1,4-[3-glucosidases (EC 3.2.1.21), which hydrolyze cellobiose and other water-soluble cellodextrins to glucose [23]. Two types of oxidative enzymes, cellobiose oxidase (CBO), now called cellobiose dehydrogenase (CDH) (EC 1.1.9.18), and cellobiose: quinone oxidoreductase (CBQ) (EC 1.1.5.1), which oxidize the reducing end group in cellobiose or higher cellodextrins in the presence of a suitable electron acceptor, have been identified in many wooddegrading fungi and may have a key role in cellulose degradation [23]. In addition, lactonase (EC 3.1.1.17) has been found to operate synergistically with cellulases in the degradation of cellulose [145]. Some aerobic and anaerobic bacteria lack [~-glucosidases and produce cellobiose phosphorylase (EC 2.4.1.20), which cleaves cellobiose but not cellotriose or higher cellodextrins [146, 147]. Because of the complex structure of hemiceUuloses, several different enzymes are needed for their enzymatic degradation. The two main enzymes responsible for the depolymerization of hemicellulose backbone are endo-l,4-[3-D-xylanase (EC 3.2.1.8) and endo-l,4-13-D-mannanase (EC 3.2.1.78). While small oligosaccharides are hydrolyzed by 1,4-]3-D-xylosidase, 1,4-[3-D-mannosidase, and 1,4-[3m-glucosidase, the side groups are split off by ~t-L-arabinosidase, a-Dglucuronidase and cx-D-galactosidase. Esterified side groups are released by acetylxylan esterase [23, 148-150]. Since the process of biodegradation of lignin by white-rot fungi is oxidative in nature, the role of phenoloxidases in lignin degradation has been extensively studied [23]. At least three phenoloxidases (Fig. 3) have been identified as important in the ligninolytic enzyme system, i.e., laccase [151,152],
62
R.C. Kuhad et al.
~__CH3iH MeOXi= HCOH+ H202 ~ I Glucose~ Glu II Ox Araoino-2-hexulose . . I '~ I .r }, I ',
. . . .
~T--~
0
~.
glyoxa, % '
~OH
-~ UnP
,.
.-'+" LiP
O''"
HO
T
",
II
i ~
"~ glyoxylic
I
/' :
.-)
~
,/ Low Mol. Wt. Products 9
02.
/
o
rPhenoxy radicals] 9 / Cation radicals | ~'@ +mediator r - L Quinones J~,-.,~
"~
H202+@l
02
.o
=E
9
~
k @ + Mn2+
. "
~
Jg~-@ + VA
Lignin
-
H202
-,~>o ~ -+'~o acid ,~," , k~_ k.2J J VA , [ ~H202 ' mediator"" # 02
. . . . . § Laccase .c~
][ s.'u2 r o I HO
CO +2 H20
H202.(~1
O2xQred
Medoxy Lignin
y
O2+(~1
.~
Phenols H20
Q0X
J~"Medrsd WW'/"*'Ligninox
o
@
E
~3+
~
H202 + Fe2+
"OH Cellulose ( ~ (~) 9 Cellobiose
-
|
|
,,-" ,,
@ Oligosaccharides
,
.. | s
c
,, Glucose ( r ~i
,j
Cellobiono-1,5-1actone H2o~I spont......
; or @ '4"-" Cellobionic acid
I|
....... .|
|
"
~. Hypha
- "
l
02
R chrysosporium
~
: H202
H 2 ~ + (O) ~
....
~ , " Gluconolactone
',
'
~'
~ (~ + domain )
/
"'.,
hems
@
I~H20 Gluconic
acid
Hypha "-,L
Fig. 3. Extra- and intracellular enzyme mechanisms involved in degradation oflignin and cellulose by the white-rot fungus Phanerochaete chrysosporium. Enzymes involved: (1) glyoxal oxidase, (2) lignin peroxidase, (3) manganese peroxidase, (4) laccase, (5) cellobiose dehydrogenase, (6) cellobiose: quinone oxidoreductase, (7) Protease, (8) Lactonase, (9) endo-l,4-~-glucanase, (10) exo-l,4-~glucanase, (11) 1,4-[~-glucosidase,(12) glucose-l-oxidase, (13) catalase. Meox methanol oxidase, Glu II Ox glucose-2-oxidase, VA veratryl alcohol. Vanillic acid metabolism: VH vanillate hydroxylase, Ph.Ox phenol oxidase, Q-red NAD(P)H: quinone oxidoreductase, Diox dioxygenase, M-red maleylacetate reductase. Metabolic products from lignin degradation: A vanillin, B vanillic acid, C methoxyhydroquinone (MHQ), D hypothetical ortho-quinone (II), E hydroxyquinol, F maleyl acetate, G Jbketoadipate
Microorganisms and Enzymes Involved in the Degradation of Plant Fiber Cell Walls
63
lignin peroxidase (LIP), and manganese-dependent peroxidase (MnP) [153-155]. Both peroxidases belong to the class of horseradish peroxidases (EC 1.11.1.7) and oxidize their substrate by two consecutive one-electron oxidation steps with intermediate cation radical formation. LiP, because of its high redox potential, can attack non-phenolic methoxyl-substituted lignin subunits, whereas MnP acts exclusively as a phenol oxidase on phenolic substrates using Mn 2 § and Mn 3 § as an intermediate redox couple [156]. Laccase (EC 1.10.3.2), a true phenoloxidase, has a broad substrate specificity. It oxidizes phenols and phenolic lignin substructures with formation of radicals. The enzyme can cause both polymerization and depolymerization by production of phenoxy radicals [157]. However, laccase is generally considered to have a redox potential too low to allow for oxidation of non-phenolic lignin structures. Other enzymes of importance in lignin degradation are the H2Oz-producing ones, (Fig. 3). Such enzymes are glucose-l-oxidase and glucose-2-oxidase [158, 159]. Other oxidases producing HzO2 have been detected in P. chrysosporium, namely methanol oxidase and glyoxal oxidase [160, 161]. The oxidative action of methanol oxidase yields formaldehyde. Glyoxal oxidase is produced extracellularly and uses several aldehydes and hydroxycarbonyl compounds found as secondary metabolites in the fungal culture filtrate [161]. In addition, the enzymes reducing phenoxy radicals may also be involved in lignin degradation processes [1]. Such enzymes are CDH, CBQ, and NAD(P) H: quinone oxidoreductase [1,162]. The novel extracellular enzymes capable of releasing aromatics (feruloyl and p-coumaroyl groups) from isolated grass cell walls and from their methyl esters are feruloyl and p-coumaroyl esterases [163, 164]. An esterase which unlocks p-coumaroyl groups from lignocellulose has been reported from Streptomyces viridosporus T7A [165], while feruloyl esterase has been detected in cultures of Schizophyllum commune [-166], F. succinogenes [167, 168], and Butyrivibrio fibrisolvens [167]. Both feruloyl and p-coumaroyl esterases have been reported to be produced by anaerobic fungi [163, 164]. The effective attack and penetration of lignified tissues, although without mineralization of lignin per se, by the anaerobic fungi strongly suggest that phenolic acid esterases play an important role in the biodegradation of realcitrant cell walls in grasses [169]. Use of these enzymes, in combination with specific hemicellulolytic enzymes, may offer a strategy to remove aromatics and specific sugars from lignocellulosics [170].
3 Degradation of Cellulose 3.1 Microorganisms Producing Cellulose-Degrading Enzymes A large number of microorganisms have the ability to produce cellulose-degrading enzymes (Table 2). However, relatively few are capable of producing all the
64
R.C. Kuhad et al.
Table 2. Important microorganisms with respect to cellulolytic potential Soft-rot fungi Aspergillus niger Chaetomium cellulolyticum F usariurn ox ysporum Neurospora crassa Penicillium pinophilum Trichoderma reesei
Aerobic bacteria Bacillus circulans Bacillus subtilis Cellulomonas fimi Cellvibrio gilvus Microbispora bispora Pseudomonas fluorescens
Brown-rot fungi Coniophora puteana Lanzites trabeum Poria placenta Tyromyces palustris
Anaerobic bacteria Acetovibrio cellulolyticus Clostridium cellulovorans Clostridium thermocellum
White-rot fungi Phanerochaete chrysosporium Sporotrichum thermophile Coriolus versicolor
Rumen (anaerobic) bacteria Butyrivibrio fibrisolvens Fibrobacter succinogenes Ruminococcus albus
Rumen (anaerobic) fungi Caecomyces (Sphaeromonas) communis Neocallimastix frontalis Neocallimastix patriciarum Piromyces communis
Actinomycetes Streptomyces lividans rhermoactinomyces curvata Thermomonospora fusca
necessary enzymes for degradation of crystalline cellulose [171]. While bacteria degrade cellulose by cell-bound enzymes, fungi secrete most of these enzymes into the surrounding growth medium [172, 173]. All organisms able to degrade crystalline cellulose secrete more or less complex systems of cellulolytic enzymes with different specificities and modes of action, which act in synergism to hydrolyze or oxidize cellulose. Fungi are the most studied organisms with respect to degradation of cellulose and production of cellulolytic enzymes. Fungal cellulases are sometimes produced in very high concentrations in submerged cultures and do not seem to form physical complexes with each other as do bacterial cellulases. However, fungal cellulases often act in a strongly synergistic manner [174-180]. Fungi causing soft-rot mainly degrade the polysaccharides. The ability to produce all the necessary enzymes for degradation of cellulose varies among the different organisms in this group. The best known of those producing a complete set of cellulases is T. viride (reesei) [181, 182]. Trichoderma strains secrete large amounts of different cellulolytic enzymes which, by their combined action, degrade crystalline cellulose. T. reesei produces at least three endoglucanases, two exoglucanases, and one or two 13-glucosidases [183, 184]. Other well known fungi causing soft-rot are listed in Table 2. Fungi causing brown-rot degrade cellulose rapidly, but the enzyme system seems to operate differently from those of T. viride (reesei) and the white-rot fungus P. chrysosporium. P. placenta, L. trabeum, and Tyromyces palustris are brown-rot fungi among the most studied for their cellulolytic activities [23].
Microorganisms and EnzymesInvolvedin the Degradation of Plant Fiber Cell Walls
65
Brown-rot fungi have been suggested to employ a different mechanism of cellulose degradation than that operating in soft-rot and white-rot fungi. Brown-rot fungi depolymerize cellulose rapidly during the early decay of wood, whereas white-rot fungi do so more slowly and utilize the degradation products simultaneously [23,185]. Brown-rot fungi produce endoglucanases and ]3-glucosidases but no detectable levels of exoglucanases [23, 91]. In contrast to these reports, C. puteana (a wide spread brown-rot fungus causing severe damage to buildings) has recently been reported to secrete two exoglucanases (cellobiohydrolases) when growing on pure cellulose [186, 187]. The presence of an exoglucanase in a brown-rot fungus is certainly intriguing. These workers have further reported that C. puteana gives a positive Bavendamm reaction [188], a feature used to distinguish between brown-rot and white-rot fungi. According to this definition, C. puteana is not a brown-rot fungus. The induction and repression mechanisms of cellulases differ remarkably in brown-rot and white-rot fungi. While the brown-rot fungi produce ample amounts ofcellulases on glucose as carbon source [189], this is not the case with white-rot fungi, at least not with P. chrysosporium, whose cellulase production is induced by cellobiose and repressed even by low concentrations of glucose [190]. Since brown-rot fungi apparently lack exoglucanases, there is no synergistic cooperation between endo- and exoglucanases to degrade crystalline cellulose [23, 91, 191]. No other enzyme systems are known to substitute for these effects [23]. The mechanisms of cellulose degradation by brown-rot fungi remain a mystery and need to be clarified. However, one hypothesis includes the involvement of the Fenton reagent mechanism, i.e. H 2 0 2 and Fe 2 +, as critical for predisposing cellulose to attack by cellulolytic enzymes during early degradation [74, 192]. Contrary to earlier reports [191,192] on the accumulation of H202 in culture media, Veness and Evans [193] could not detect extracellular H202 in cultures of several brown-rot fungi. However, Fenton's reagent was observed to give rise to acid production from cellulose. The same acids were formed by a crude enzyme mixture from T. reesei. Recently brown-rot fungi have been observed to secrete low molecular mass glycoproteins which chelate ferrous ions [194]. It was proposed that these iron-containing glycoproteins are small enough to penetrate the $2 and Ss layers of wood cell walls to catalyze the oxidation of electron donors by molecular oxygen to produce oxygen species such as 02" and H202. According to the hypothesis, all reactants required for cell wall degradation by a Fenton-like reaction would be present simultaneously in the Sz layer. More recently, Backa et al. [195] have reported the generation of hydroxyl radicals by brown-rot fungi grown in liquid media, agar media, or wood. Their observations have indicated that hydroxyl radicals (HO.) contribute significantly to the initial degradation of wood. The hydroxyl radical is one of the few agents that can disrupt the crystalline structure of cellulose. In biological systems, most hydroxyl radicals are produced by Fenton reactions [196]. Kirk et al. [197] have reported that Fenton's reaction causes a cellulose degradation
66
R.C. Kuhad et al.
similar to that resulting from brown-rot decay. Other non-enzymatic agents such as siderophores [198] and oxalic acid [199] have been reported to be involved during degradation of wood by brown-rot fungi. The mechanism by which these agents work along with the enzymes in situ to degrade cellulose is not known. The brown-rot fungi form extensive hyphal sheaths, which appear to provide a functional interface between the fungal hyphae and the wood [200-202]. Degradation of wood by brown-rot fungi has been reported to occur at a distance from the fungal hyphae and to be characterized by early removal of the hemicellulose components. The following functions have been assigned to the extracellular sheath: (1) modification of the extracellular ionic environment and pH-level, (2) recognition of and adhesion to the substrate, (3) concentration, storage, and transport of decay agents, (4) protection against dehydration and other environmental impacts, (5) conditioning of the wood substrate to degradation, (6) storage of nutrients, (7) regulation of the decay process, (8) increase of the surface area for aerobic respiration, and transportation and presentation of wood-degrading enzymes during the degradation process [201,203-205]. Green et al. [-205] have revealed the localization of enzymes on fibrillar elements of the sheath structure, on the hyphal surface, and within the soluble sheath matrix. The group of fungi causing white-rot is rather heterogenous, but these fungi have in common the ability to degrade lignin as well as other lignocellulosic components [206]. The most studied white-rot fungus was first isolated from wood chip piles and was originally given the name Chrysosporium lignorum [207]. The name was later changed to Sporotrichum pulverulentum for its imperfect stage [208] and then to Phanerochaete chrysosporium for its perfect stage [209]. The fungus grows optimally at 38-39 ~ and hence is characterized as thermotolerant. At least five endoglucanases, three exoglucanases, and two [3-glucosidases have been characterized in cultures of P. chrysosporium [210-213]. The anaerobic rumen-inhabiting fungi secrete cellulases, often described as a complex of enzymes which, by acting together, solubilize cellulose efficiently [214]. An extracellular enzyme system from Neocallimastixfrontalis was found to have a several-fold higher specific activity in solubilizing cotton fibers per unit of endo-I~-glucanase activity than the endoglucanase of T. reesei mutant, Rut C-30, known to produce a very active cellulolytic system [215]. The major end product of the N.frontalis-cellulases, acting on Avicel cellulose, was glucose and not cellobiose, which also indicates an efficient 13-glucosidase activity [216]. Wilson and Wood [217] showed that a minor component (4% of the total extracellular protein) of the cellulolytic enzymes of N. frontalis is present in a cellulosome-like structure which is secreted and adsorbed on to cellulose. In this respect, N.frontalis resembles the bacterium Clostridium thermocellum. The component which degrades crystalline cellulose contains several enzymes arranged in a complex called the cellulosome, although the cellulosome of N.frontalis (700 kDa) is smaller than that of C. thermocellum (2 • 106 kDa) and also differs in other ways [120]. Recently, Wood and Wilson [218] reported on
Microorganisms and Enzymes Involved in the Degradation of Plant Fiber Cell Walls
67
Piromyces communis, another anaerobic rumen fungus capable of producing a highly active cellulase system. This enzyme system was capable of solubilizing highly crystalline cotton fibers at a rate greater than that of any other cell-free cellulase system reported in the literature. Cellulose is also degraded by both aerobic and anaerobic bacteria. However, the cellulolytic enzyme systems of bacteria are not directly comparable to those of fungi. Bacteria often produce cellulases in small amounts ( < 0.1 g/L), and degradation of cellulose seems to take place by a cluster of multienzyme complexes which are difficult to disrupt without loss of total activity as well as of the individual components [219]. The most studied bacteria with respect to their cellulase systems are species of Clostridium, Cellulomonas, Bacillus and Pseudomonas. The cellulase complex of C. thermocellum cellulosome, consists of several endoglucanases, an exoglucanase, a cellobiose phosphorylase that breaks down cellobiose to glucose and glucose-l-phosphate, a cellodextrin phosphorylase which phosphorolyzes 13-1,4-oligoglucans, and two 13-glucosidases [220]. The cellulosome produced by C. thermocellum and other Clostridia is a cellulose-binding and cellulase-containing complex, which is responsible for most of the cellulase and hemicellulase activities observed in culture broth of such bacteria [219]. During exponential growth on cellulose, the cellulosome is anchored to the bacterial cell surface, and anchors the cells to the insoluble substrate. When the cellulose is solubilized, the bound enzyme clusters are released into the culture medium [221]. Other bacteria which may produce cellulosome-like entities similar to those produced by C. thermocellum include Acetovibrio cellulolyticus, Bacterioides cellulosolvens, Butyrivibrio fibrisolvens, Cellulomonas sp., Clostridium cellobioparum, C. papyrosolven, Fibriobacter succinogenes, Ruminococcus albus, R. flavefaciens, and Thermomono spora curvata [222]. The extracellular cellulase systems of Pseudomonas fluorescens and Cellvibrio gilvus are also similar to those mentioned above, and degradation products of enzymatic action are mainly cellobiose and cellotriose [223]. Filamentous prokaryotes such as Actinomycetes are also important members of the microbial community responsible for the degradation of cellulose. Mesophilic species of Streptomyces and thermophilic species of Thermomonospora and Thermoactinomyces are the most studied of these organisms [224, 225]. Their extracellular cellulases degrade cellulose by mechanisms similar to those of fungi, i.e., non-associated enzymes excreted into the culture medium.
3.2 Cellulolytic E n z y m e s 3.2.1 Regulation of Cellulase Production The production of cellulases appears to be controlled by induction and repression mechanisms. In most microorganisms, cellulase biosynthesis is induced by
68
R.C. Kuhadet al.
cellulose degradation products [21]. The endoglucanases have been the most studied in this respect. P. chrysosporium [190] and G. trabeum [226] have been shown to form endoglucanases in media containing only carboxymethylcellulose (CMC), while this was not the case with T. reesei. Cellobiose is an inducer of endoglucanases in both P. Chrysosporium [190] and G. trabeum [226], but does not induce any endoglucanase activity in T. reesei [190]. In contrast, sophorose is the most potent cellulase inducer in T. reesei [227, 228]. However, cellobiose has been shown to induce cellulases in T. reesei, but only when cellobiose hydrolysis is artificially decreased by addition of nojirimycin [229]. Other cellulose degradation products such as cellobiono-l,5-1actone 1-230] or oxidized cellulose [231] have also been demonstrated to enhance the formation of cellulases in T. reesei. Glucose is the end product of cellulose hydrolysis and causes catabolite repression of endoglucanases in P. chrysosporium [190] and T. reesei [232]. In contrast, the brown-rot fungi P. placenta and G. trabeum produce endoglucanases with glucose or mannose as the sole carbon source, even if the expression of these enzymes was four to five times as high with cellulose or cellobiose as carbon sources [88,226]. The addition of glucose to induced cultures of G. trabeum to a concentration of 40 mM or higher does not repress the production of endoglucanases [226]. It appears from various studies that the regulation of cellulase synthesis in anaerobic fungi also involves both induction by cellulose and catabolite repression by glucose [233-237]. However, considering the low concentration of free glucose in the rumen, it is unlikely that glucose regulates cellulase synthesis in vivo [14]. Production of cellulases in fungi is also regulated by phenomena other than induction and catabolite repression by cellulose degradation products. Various phenols have thus been demonstrated to repress the production of cellulases and xylanases in S. commune and C. 91obosum. In addition, phenols repressed endoglucanase in phenoloxidase-less mutants of P. chrysosporium, but caused no significant repression in phenoloxidase-less revertants and in the wild type [147]. Moreover, cellulose activity in culture filtrates of fungi is dependent not only on regulation of cellulase biosynthesis but also on the presence of specific inhibitors in the culture. Gluconolactone is a powerful inhibitor of [3-glucosidase in P. chrysosporium and T. reesei [-211,238]. Inhibition of ~-glucosidase activity by gluconolactone or nojirimycin prevented induction by cellulose, but not by sophorose [238]. However, sophorose fails to induce all components of the cellulolytic system, indicating that other degradation products of cellulose might contribute to regulation of this system [239]. The true inducer of cellulase expression, in T. reesei as well as enzyme(s) responsible for its formation, remains unexplained. However, not only inhibition but also activation of cellulases seems to occur in culture solutions of fungi. Thus, two acidic proteases produced under cellulolytic conditions have been demonstrated to enhance endoglucanase activity (Fig. 3) in P. chrysosporium up to tenfold [23].
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
69
Induction of cellulase biosynthesis by cellulose degradation products is likely to occur in actinomycetes and bacteria as well. Addition of cellulases exogenously to a cellulose culture medium of Thermomonosporafusca prompted the induction of cellulases [240]. Cellobiose and sophorose have both been shown to act as inducers of cellulase synthesis in Cellulomonas mutants insensitive to catabolite repression [241]. Recently, Weimer [14] has discussed the regulation of the cellulase systems in rumen bacteria. The complete cellulase complexes in these bacteria do not seem to be highly regulated by the carbohydrate concentration. However, the regulation of individual proteins must not be ignored. The cellulase synthesis does not appear to be induced by cellulose and cellobiose, and glucose neither represses enzyme synthesis nor inhibits enzyme activity, except at concentrations well above those encountered in vivo [242, 243].
3.2.2 Molecular Properties
Most of the fungal and some of the bacterial cellulases are glycoproteins with sugars attached to asparagine (N-linked) or serine and threonine (O-linked) residues. The carbohydrate content of cellulases varies from 1 to about 10%, and the principal sugar is mannose. However, other sugars such as glucose, galactose, xylose, N-acetyl glucosamine, and galactosamine have also been detected [244]. Nitrogen-linked glycosylation appears to impart a specific conformation and stabilize the structure of the cellulases, thereby protecting them from proteolytic attack during secretion while O-linked glycosylation seems to be required for secretion of an active cellulase [-245]. Endoglucanases hydrolyze ]3-1,4-glucosidic bonds in a random fashion over a cellulose chain. As a result, there is a rapid decrease in chain length and a slow increase in reducing end groups. Three different endoglucanases, i.e EG I, EG II, and EGIII are produced by T. reesei [239, 246]. The major EG component, EG I, represents approximately 5-10% of the totally secreted proteins in T. reesei cultures [247]. In spite of clear differences in their mechanism of actions, the N-terminal sequences indicate considerable homology between EG I and CBH I [-248]. Multiple forms of EG III have been purified exhibiting Mr values of 48, 48 and 37 kDa with pIs corresponding to 5.4, 5.7, and 4.8 [-184]. A number of other endoglucanases have also been isolated from T. reesei cultures which could not be identified as either EG I or E G I I I [249]. Cellobiohydrolases (exoglucanase, EC 3.2.1.91) degrade cellulose by splitting off cellobiose from the non-reducing end of the chain. These enzymes have very limited action on substituted cellulose such as carboxymethyl cellulose (CMC) and hydroxyethyl cellulose (HEC). Heterogeneities of the cellobiohydrolase components from T. reesei have been studied in detail, and two immunologically distinct cellobiohydrolases, CBH I and CBH II, have been detected in the extracellular medium of T. reesei using polyclonal antibodies [-250]. Both are glycoproteins differing in the amount of carbohydrates attached to the protein.
70
R.C. Kuhad et al.
They lack any apparent homology in their amino acid sequences. The differences in the active centers of these enzymes are reflected by differences in their mode of action. While CBH I preferentially binds to crystalline regions, CBH II binds to both crystalline and amorphous regions [251]. CBH I comprises the major part (ca. 60%) of the cellulolytic enzymes synthesized by T. ressei [252]. ~-Glucosidases, secreted by cellulolytic organisms, represent a small portion of the total extracellular proteins. They catalyze the hydrolysis of water-soluble cellodextrins as well as alkyl- and aryl-13-D-glucosides. Intracellular and plasma membrane-bound 13-glucosidases have also been identified. However, the exact genetic and biochemical relationships between these different [~-glucosidases are not yet clearly understood. It has been suggested that extracellular enzymes may result from the release of intracellular or membrane-bound enzymes to the outside medium upon autolysis [253]. Species of Aspergillus and Phanerochaete seem to produce 13-glucosidases of higher molecular weights than does T. reesei [23]. From Sporotrichum thermophile, two distinctly different [3-glucosidases were isolated [254]. One with a Mr of 440 kDa had only aryl-[3-glucosidases activity, while the other, with a Mr of 40 kDa, had cellobiase activity and only low activity toward aryl-[3-glucosides. Purified [3-glucosidase from C. 9ilvus attacks cellobiose slowly as compared to its activity towards higher oligosaccharides [255]. Cellobiose dehydrogenase (CDH), previously termed cellobiose oxidase (CBO) [256-258], is produced by several cellulolytic fungi (soft-rots, white-rots, and one brown-rot, i.e., C. puteana). Moreover, recently, CDH production from a cellulolytic bacterium Cyotophaga sp. LX-7 has also been reported [259]. CDH carries both FAD and heme as prosthetic groups. Various investigations have revealed that a proteolytic cleavage product of CDH, previously known as cellobiose: quinone oxidoreductase (CBQ) [260], represents the flavin-containing domain of CDH [261-263]. Both CDH and CBQ, in the presence of an appropriate electron acceptor, oxidize the reducing end groups of cellobiose, higher cellodextrins, and even cellulose to the respective onic acids via the corresponding lactone [257, 258]. Both CDH and CBQ are known to utilize quinones and their analogs, such as 2,6-dichlorophenol-indophenol (DCPIP), as electron acceptors. Cytochrome c acts as an electron acceptor for CDH but not for CBQ [264, 265, 257]. This ability of CDH is used to differentiate between CDH and CBQ. The total activities of both CDH and CBQ can be determined using either ferricyanide DCPIP or other reducible quinones as electron acceptors. CDH is a monomeric protein in which the heme group has been shown to be of the cytochrome b type [266]. The enzyme reduces cytochrome c about 200 times as fast as it reduces oxygen [264], whereas Fe(III) compounds such as Fe(III) acetate and Fe(CN)~ are reduced 35-50 times as fast as molecular oxygen [267]. CDH could be split into the FAD and the heme domains by papain [261] and by proteases from P. chrysosporium [263], although, in the latter case, only when the CDH was bound to cellulose. Only the FAD domain
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
71
was reduced by the addition of cellobiose [261]. This indicates that the FAD domain is directly responsible for the oxidation of cellobiose and that the electrons must then be transferred from the reduced FAD to an appropriate acceptor, i.e the heme domain, quinone, Fe(III), or even molecular oxygen. Small-angle X-ray scattering studies have suggested that CDH as well as its fragments appear to be of prolate shape, and that the cross-section of the FAD (4.3-5.1 nm) is considerably larger than that of the heine fragment (3.3 nm) [268]. The observations further suggested a co-linear arrangement of the two domains of CDH. Thus, according to their model, CDH appears very much to be a linear particle. However, the possibility that CDH may have a bent shape cannot be ruled out. Based on the research conducted with these oxidative enzymes, some possible physiological roles of these in cellulose and lignin degradation have been suggested [257]: (1) oxidation of cellulose and introduction of carboxyl groups, resulting in a distortion of the crystalline structure of cellulose, (2) conversion of cellobiose, which inhibits hydrolytic enzymes, into cellobionic acid, (3) oxidation of reducing end groups in cellulose to prevent reformation of glycosidic bonds broken by cellulases, (4) direct energy uptake by coupling with electron transfer chains on the fungal cell wall, (5) generation of active species (superoxide anion radicals) to disrupt the crystalline structure of cellulose, thus facilitating hydrolysis of cellulose, and (6) reduction of phenoxy radicals to prevent repolymerization of lignin degradation products. Interestingly, CDH has also been demonstrated to act as a Fenton's reagent to generate hydroxyl ('OH) radicals (Fig. 3) in the presence of Fe(III) and H202 [267, 269]. The hydroxyl radicals are strong enough oxidants to attack not only cellulose but also other plant cell wall components in a non-specific manner [162]. However, a physiological operation of such a mechanism requires some special extracellular compartmentation arrangements since the production of these radicals could also be harmful to the fungus [270]. Bacterial cellulases seem to be quite a complex mixture. In Cellulomonasfimi cultures, up to 10 components with CMCase (endoglucanase) activity have been identified [271]. The glycosylated components bind strongly to Avicel and are stabilized by this substrate, whereas enzymes free in solution are unstable and are altered by proteolysis and deglycosylation [272]. The endoglucanase of B. subtilis exhibits almost twice the specific activity of the T. reesei endoglucanase [273]. Recently, a bifunctional cellulase was isolated from Bacillus sp. D 04 [274]. The enzyme was a single polypeptide (Mr 35 kDa) with both endo- and exoglucanase activities, each activity existing at a separate site. One cell-bound and two extracellular (A and B) endoglucanase components of P.fluorescens var. cellulosa have been identified [275]. All three of these enzymes hydrolyzed a variety of substrates, and the mode of action toward CMC substrates appears to be similar to that shown by fungal endoglucanases. The major endoglucanase ( > 80% of total endoglucanase activity) of T. curvata exhibits its highest activity on CMC with a high degree of polymerization [276]. Glutamic and aspartic acids constitute 24% of the total amino acid composition.
72
R.C. Kuhad et al.
Bacterial cellulase systems differ from fungal cellulase systems by forming aggregates of multienzymes (cellulosomes) rather than existing as individual extracellular enzymes [222]. Cellulosomes are known to be produced by several anaerobic cellulolytic bacteria, Clostridia in particular. The cellulase system of C. thermocellum is very active against crystalline cellulose, with a specific activity higher than that observed for the T. reesei cellulase system [277]. The cellulosomes have molecular masses ranging from 2 x 106 to 6.5 x 1 0 6 Da, diameters of about 18 nm, and contain 14 to 26 different polypeptides ranging in size from 37 to 210 kDa [219, 221,278]. Cellulosomes form larger complexes, polycellulosomes, with masses from 50 x 1 0 6 to 80 • 1 0 6 Da [279]. Protuberances covering the surface of the bacterial cells are packed with polycellulosomes, each of which seems to contain several hundred cellulosomes [280]. The cellulosome efficiently hydrolyzes both amorphous and crystalline cellulose, whereas individual peptides alone or as a mixture do not [281]. Many of the polypeptides in the cellulosome complex are catalytically active and can be characterized as endoglucanases, xylanases, and cellodextrinases. The occurrence of cellobiohydrolase in cellulosomes has been suggested [282, 283], but its presence still needs reconfirmation [281]. In addition, 13-glucosidase, [3-xylosidase, J3-galactosidase, and [3-mannosidase activities have also been observed in cellulosomes [284]. Several polypeptides in cellulosomes have been sequenced, including the largest (210-250 kDa), a cellulosome-integrating protein previously termed S1 or SL and now designated CelL or CipA [285]. CipA may act as a cellulosebinding factor and/or a scaffolding protein anchoring the various catalytic subunits of the cellulosome, which, in addition, binds to the cellulosic substrate and also anchors the complex to the bacterial cell surface [281,286]. Another important subunit from the cellulosome has been identified as CelS (82 kDa), termed the catalytic unit [286]. CipA and CelS are thus two of the components of the cellulosome of C. thermocellum [287]. An "anchor-enzyme model" proposed to explain the cooperative action between these two subunits [-288] was confirmed by DNA sequencing of the genes encoding these two proteins [289]. Based on these observations, the model was recently expanded into a more sophisticated one [290]. It is now evident that CipA provides the anchor for the other catalytic components and that CelS provides the cellobiohydralase or exoglucanase activity necessary for crystalline cellulose degradation. For details about the mechanism of cellulose degradation according to the anchor-enzyme model, readers are referred to Wu [-290] and Wang et al. [286]. Also, an excellent review on the cellulosome of the anaerobic thermophilic C. thermocellum has recently been published by Felix and Ljungdahl [281]. The cellulosomes in other Clostridia such as C. cellulovorans, C. cellulolyticum and C. jsui appear to have properties very similar to those of the C. thermocellum cellulosome [291]. The cellulosome of C. cellulovorans consists of three major subunits called CbpA, P100, and P70 and of at least six different enzyme subunits [292].
Microorganisms and EnzymesInvolvedin the Degradation of Plant Fiber Cell Walls
73
Some aerobic and anaerobic bacteria employ phosphorylases for cellulose degradation [-147]. Cellobiose and higher cellodextrins are metabolized by C. 9ilvus, and the cell yield per glucose equivalent increases with the degree of polymerization (DP) of the cellodextrins. This suggests that cleavage of glucosidic bonds is brought about by phosphorylation and thus conservation of energy of these bonds [23]. The physiological role of cellobiose phosphorylase (EC 2.4.1.20) is to convert cellobiose into glucose-l-phosphate, which is utilized more efficiently than glucose by these microorganisms. The presence of cellobiose phosphorylase was first demonstrated in C. thermocellum 1-293]. Two types of enzymes have been identified, namely, those specific for cellobiose and those utilizing higher cellodextrins for the formation of a-glucosyl phosphate [146, 294]. The major products of enzymatic action are glucose-l-phosphate and glucose. The purified cellobiose phosphorylase from C. 9ilvus was found to consist of four subunits and to have specificity for cellobiose, requiring Pi and Mg 2+ for phosphorylation [146].
3.2.3 CelluIases are Organized in Domains
Proteolytic cleavage of cellulases into separate catalytic and cellulose-binding regions demonstrated the presence of these two domains within these enzymes 1-295]. On the basis of existing amino acid sequence identities in their putative catalytic domains, fungal and bacterial cellulases have been classified into families of homologous proteins. This classification is confirmed by hydrophobic cluster analysis [296, 297]. For details of classification based on catalytic domains, their occurrence and properties, readers are referred to the excellent reviews available on this aspect [298, 299]. In brief, family A includes cellulases from a diverse range of organisms including Gram-negative and Gram-positive bacteria, aerobic and anaerobic bacteria, and the fungus T. reesei (Table 3). Besides typical patterns of hydrophobic amino acids, some of the conserved regions contain residues that are identical in most of the sequences. In family B, three clearly related endoglucanases from C. fimi, Streptomyces sp. KSM-9 and Microbispora bispora, and CBH II from T. reesei sharing significant similarity are included (Table 3). Family C comprises three cellulases of fungal origin, exhibiting at least 45% similarity (to each other). Among three bacterial cellulases in family D, Erwinia ehrysenthemi EGY and C. uda EG are more closely related. Families E, F, and G are also of bacterial origin, with most of the enzymes from F and G having xylanase activity. Out of nine families, A, B, F, and H contain both fungal and bacterial enzymes. Family C contains only fungal enzymes, and families D, G and I contain only bacterial enzymes. Family E contains both bacterial and plant enzymes (Table 3). Cellulose-binding domains (CBDs) form distinct functional units for most cellulolytic enzymes. Although these CBDs are not essential for catalytic activity, they do modulate the specific activities of the enzymes on soluble and insoluble cellulosic substrates. Table 4 summarizes the different CBDs identified
R.C. Kuhad et al.
74 Table 3. Cellulase and xylanase families of homologous catalytic domains Family organism
Enzyme
Terminus
Reference
A Bacillus sp. 1139 Bacillus sp. N-4 Bacillus sp. N-4 Bacillus sp. N-4 Bacillus polymyxa Bacteroides ruminicola Butyrivibriofibrisolvens Caldocellum saccharolyticum Clostridium acetobutylicum Clostridium cellulolyticum Clostridium thermocellum Clostridium thermocellum Clostridium thermocellum Clostridium thermoceUum Erwinia chrysenthemi Fibrobacter succinogenes Ruminococcus albus SY 3 Ruminococcus albus SY 3 Trichoderma reesei Xanthomonas campestris
EG EG A EG B EG C EG EG END 1 EG B EG 1 EG A Cel B Cel C Cel E Cel H EG Z EG 3 CEL A CEL B EG III EngXCA
N N N N
[637] [638] [638] [639] [640] [641] [642] [643] [644] [627] [645] [646] [647] [648] [628] [649] [650] [650] [635] [651]
B Cellulomonas fimi Microbispora bispora Streptomyces sp. KSM-9 Trichoderma reesei
Cen A Cel A Cas A CBH II
C Humicola grisea Neurospora crassa Phanerochaete chrysosporium Trichoderma reesei Trichoderma reesei Trichoderma viride
CBH CBH CBH CBH EGI CBH
D Bacillus circulans Cellulomonas uda Clostridium thermocellum Erwinia chrysenthemi
Bgc EG Cel A EG Y
E Butyrivibriofibrisolvens Cellulomonasfimi Cellulomonas fimi Clostridium thermocellum Clostridium stercorium Dictyostelium discoideum Persea americana Persea americana Persea americana Pseudomonas fluorescens Pseudomonasfluorescens Pseudomonas fluorescens
CED I Cen B Cen C Cel D Cel Z SGSP27(~6 EG Cel 1 Cel 2 Cel A Cel B Cel E
F Bacillus sp. C-125 Butyrivibrio fibrisolvens Caldocellum saccharolyticum Caldocellum saccharolyticum Caldocellum saccharolyticum Cellulomonas fimi
Xyn A Xyn A Cel B Xyn A ORF 4 Cex
I I I I
N N C N N N N C N C C N C N C
[623] [629] [652] [633]
N N N N N
[653] [636] [631] [632] [634] [654]
N
N Internal N N N
N C N N N N
[655] [656] [657] [658] [622] [624] [625] [659] [660] [661] [662] [663] [663] [630] [303] [304] [664] [665] [643] [666] [666] [626]
Microorganisms and Enzymes Involved in the Degradation of Plant Fiber Cell Walls
75
Table 3. (Continued) Family organism Clostridium therrnocellum Cryptococcus albidus Pseudomonasfluorescens Pseudomonasfluorescens Thermoascus aurantiacus
Enzyme
Terminus
Reference
Xyn Z Xyn Xyn A Xyn B Xyn
C
[667] [668] [669] [670] [671]
C C
G Bacillus circulans Bacillus pumilus Bacillus subtilis Clostridium acetobutylicum
Xyn Xyn A Xyn Xyn B
[672] [673] [674] [675]
H AspergiUus aculeatus Erwinia carotovora
EG Cel S
[676] [310]
I
Cel A
[311]
Ruminococcus albus
Table 4. Cellulose binding domains in bacterial and fungal cellulases Organism
Enzyme
Terminus
Reference
EG Cen A Cen B Cen C Cex EG A EG Z Cel A Cel A Cel B Cel E
C N C N C C C C C N C
[622] [623] [624] [625] [626] [627] [628] [629] [630] [303] [304]
CBH I CBH I CBH I CBH II EG I EG II
C C C N C N
[636] [631] [632] [633] [634] [635]
Bacteria Butyrivibrio fibrosolvens Cellulomonas fimi Cellulomonasfimi Cellulomonas fimi Cellulomonas fimi Clostridium cellulolyticum Erwinia chrysenthemi Microbispora bispora Pseudomonasfluorescens vat. cellulosa Pseudomonasfluorescens var. cellulosa Pseudomonasfluorescens var. cellulosa
Fungi Neurospora crassa Phanerochaete chrysosporium Trichoderma reesei Trichoderma reesei Trichoderma reesei Trichoderma reesei
in b a c t e r i a l a n d fungal cellulases. Sequence a n a l y s e s of four cellulases f r o m T. reesei reveal the presence of a s h o r t c o n s e r v e d r e g i o n (AB region) at either N - t e r m i n a l ( C B H I a n d E G III) o r C - t e r m i n a l ( C B H I a n d E G I) of these enzymes [-300]. T h e r e m o v a l of the A B region f r o m C B H s h a s been s h o w n to decrease significantly their affinity to m i c r o c r y s t a l l i n e cellulose. C B D of E G I has significantly h i g h e r c e l l u l o s e - b i n d i n g affinity t h a n t h a t of C B H I [301]. M o s t of the differences are a s c r i b e d to a r e p l a c e m e n t of a t y r o s i n e b y a t r y p t o p h a n in tile c e l l u l o s e - b i n d i n g d o m a i n .
76
R.C. Kuhadet aL
The most important features of bacterial CBD sequences are: low contents of charged amino acids, high contents of hydroxy amino acids, and conserved tryptophan, asparagine, and glycine residues. Din et al. [302] have demonstrated that the isolated CBD of CenA (endoglucanase) from C. fimi, while having no detectable hydrolytic activity, disrupts the structure of cellulose fibers and releases small cellulolytic particles. The CBD of an endoglucanase (CelB) from P. fluorescens var. cellulosa binds the enzyme to cellulose as does CBD of CenA from C. fimi [303]. Recently, a novel endoglucanase (CelE), containing N-terminal catalytic and C-terminal cellulose-binding domains, was characterized by the same group of scientists [304]. A truncated form of the enzyme, which lacked the CBD, displayed the same activity of a full-length CelE against soluble cellulose and acid-swollen cellulose, but substantially lower activity than the full-length enzyme against Avicel, a microcrystalline type of cellulose. The cellulosome of C. thermocelIum binds strongly to cellulose, and this binding may be mediated by a non-catalytic component of the cellulosome [-278]. A CBD has been reported to be present in a cellulosome-integrating protein A (CipA) [305]. The cellulose-binding protein (CbpA) has been shown to mediate the interaction between crystalline cellulose substrates and the cellulase enzyme complex of Clostridium cellulovorans [-306]. Mutation analysis revealed that the entire 163-amino acid region of CBD was required for the maximal binding to crystalline cellulose [307]. The cellulose binding of CDH from P. chrysosporium was discovered independently in two different laboratories [,261,308]. The binding was found to be comparable with that of T. reesei CBH I and to be associated with the FAD domain and probably independent of the catalytic site. A comparison of the binding isotherms of CDH and CBH I has shown that the dissociation constant of CDH is much lower than that of CBH I. The capacity (the amount of enzyme bound per unit mass of cellulose) is also lower, which indicates that CDH binds more sparsely than does CBH I [-309]. Recently, cDNA encoding CDH from P. chrysosporium has been cloned and characterized [310, 311]. The low sequence similarity with the conserved cellulose binding sequences of cellulases suggested that CDH might possess a specific sequence for cellulose binding which is different from that of cellulases [311].
3.2.4 Catalytic Properties It is now a well-established fact that degradation of crystalline cellulose is carried out by a multicomponent enzyme system wherein the individual components interact in a synergistic way to convert the insoluble substrate glucose [23, 180]. The synergistic action of cellulases depends on the ratio of individual enzymes, the degree of substrate saturation, and the type of substrate [-312]. The action of CBH I and CBH II and the EG I and EG III, purified from T. reesei, has been evaluated against different substrates [313]. Synergism between the EGs and CBH II follows the normal pattern for endo/exo type synergism,
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
77
whereas the synergism between the EGs and CBH I depends on the structural and ultrastructural features of the substrate. The activity of individual enzymes from T. reesei is greatest toward amorphous cellulose, whereas binary combinations CBH I/EG III and CBH I/CBH II exhibit a greater degree of synergism toward crystalline cellulose [314-3163. The synergistic action of two immunologically distinct cellobiohydrolases (I and II) from Penicillium pinophilum was at its maximum on Avicel when the two enzymes were mixed in the ratio 1 : 1 [317]. It was suggested that these may be two stereospecific enzymes concerned with the hydrolysis of two different configurations of non-reducing end groups, one being exposed on the cellulose surface and the other being buried as shown by Henrissat et al. [318]. While only CBH II of P. pinophilum acts synergistically with cellobiohydrolases of T. koningii and Fusarium solani, only CBH I shows synergistic action with the endoglucanases of T. koningii or F. solani [-317]. About 45 years ago, Reese et al. [319] postulated that microbial conversion of native cellulose to soluble sugars involved two enzymes that acted consecutively. The model proposed that an unidentified enzyme called C1 acted first, making the substrate more accessible to a hydrolytic enzyme called Cx. However, the precise action of C1 was not clear, and a strictly nonhydrolytic C~ has never been identified. Intramolecular synergism was recently shown in endoglucanase CenA from C. fimi, which is composed of a catalytic and a nonhydrolytic CBD that can function independently [320]. The individual domains interact synergistically in the disruption and hydrolysis of cellulose fibers. It was suggested that the catalytic domain corresponds to the hydrolytic Cx system, and the CBD corresponds to the nonhydrolytic C~ system postulated by Reese and his colleagues. The cleavage of [3-1,4-glycosidic linkages catalyzed by cellulases is commonly assumed to proceed with a lysozyme-type mechanism through protonation of the glycosidic oxygen by an acidic amino acid residue and stabilization of the resulting carbonium ion by another amino acid residue [321]. The active sites of many enzymes have been found to involve aspartic and glutamic acid residues. There are pronounced differences in the mode of hydrolysis even between CBH I and CBH II and EG I and EG IlL CBH I attacks at sites other than the non-reducing end in the higher homologs (cellodextrins), and hydrolyzes both cellobiosides and lactosides. On the other hand, CBH II shows strict substrate specificity, three to four contiguous ~-l,4-1inked glycosyl residues being required [322]. It has also been deduced that CBH I acts with overall retention of configuration, whereas CBH II acts with reversion of configuration [-323]. Endoglucanases act via retention of configuration. EG 1 belongs to the group of non-specific endoglucanases because it also hydrolyzes xylan [324]. Its hydrolytic reaction proceeds with transfer reactions, which indicates that it probably possesses several subsets, each capable of binding a glucose molecule, and the glucosyl intermediates formed during the hydrolytic reactions are then transferred to acceptor molecules [323]. The structure of some members of cellulase families is now known. Smallangle X-ray diffraction studies suggest that both CBH I and CBH II from
78
R.C. Kuhad et al.
T. reesei are essentially tadpole-shaped [325, 326]. The core is estimated to be 60 to 7OA long with a diameter of 40 A, and to be attached to a tail estimated to be 150 A long. Bergfors et al. [327] successfully crystallized the catalytic core of the T. reesei CBH II after removing 82 amino acids from the N-terminus by papain cleavage. It consists of a TIM-like a/[3-barrel with the active site residues (two aspartates) located in the center of a tunnel [328]. Later, the catalytic cores of CBH I and EG I from T. reesei were also crystallized using the hanging drop vapor diffusion method [329]. Joliff et al. [330] purified and crystallized enduglucanase D from C. thermocellum. Crystals were trigonal and diffracted X-rays to a resolution of 2.8 A. CelD of C. thermocellum consists of a 12-0t-helical barrel with the active site residues situated in a long groove across the surface of the enzyme [331]. It contains an extended NHz-terminal segment sticking out from the enzyme core to interact with a symmetry-related molecule through an intermediate salt bridge (Lys 38-Asp 201) [332]. EG I from Hurnicola isolens was crystallized in different forms using various precipitants by vapor diffusion methods [333]. Two forms obtained from ammonium sulfate precipitation grow as tetragonal bipyramids, while third and fourth forms obtained from PEG 8000 grow as monoclinic plates and long hexagonal rods, respectively. EG V from H. isolens consists of a six-stranded [~-barrel domain with interconnecting loops with a 40 A groove along the surface of the enzyme containing the catalytic residues Asp 10 and Asp 121
[334]. A comparison of the structures of the catalytic cores of CBH II from T. reesei [328] and the catalytic domain (E2cd) of Thermomonosporafusca revealed large differences in their active site accessibility and supported the hypothesis that the main differences between endo- and exoglucanases is the degree to which their active sites are accessible to substrates [335].
3.3 A s s a y o f Cellulolytic E n z y m e s A wide variety of substrates have been used for the assay of cellulose-degrading enzymes (Table 5). However, due to the lack of specific substrates and lack of standardization of activity determination, it has been difficult to compare cellulase production in one fungal or bacterial strain with another. The most commonly used assay of complete cellulase activity is based on the hydrolysis of filter paper [336]. The activity is defined as the amount of reducing sugars released in one hour when using 50 mg of Whatman No. 1 filter paper as substrate under standardized conditions. Released reducing sugars are quantified by the dinitrosalicylic acid (DNS) method [337], and the results are expressed as glucose equivalents. However, this method registers only the number of reducing end groups and is very much dependent upon the [3-glucosidase levels in the enzyme mixture [338]. The use of standardized dyed insoluble cellulosic substrates (dyed Avicel or filter paper) has also been
Microorganisms and Enzymes Involved in the Degradation of Plant Fiber Cell Walls
79
Table 5. Assay of cellulolytic enzymes Enzyme
Substrate
Measurement
Total cellulase
Filter paper/Avicel Dyed cellulose Cellulose agar 14C-cellulose
Reducing sugars Release of dye Agar clarification 14C_products
Endoglucanase
Carboxymethyl cellulose Hydroxyethyl cellulose
Reducing sugars viscosity
Exoglucanase
Amorphous cellulose p-Nitrophenyl-13-cellobioside p-Nitrophenyl-13-1actoside
Reducing sugars p-Nitrophenol
fI-Glucosidase
Cellobiose p-Nit rophenyl- ~-D-glucoside 4-Methylumbelliferyl-[3-glucoside
Glucose p-Nitrophenol 4-Methylumbelliferone
(Cellobiose: quinone oxidoreductase)
Reducible quinones such as 2,6-Dichlorophenol-indophenol, 3-Methyl-5-t-butyl-benzoquinone in the presence of cellobiose or lactose
Decrease in absorbance
Cellobiose phosphorylase
Cellobiose
Glucose- 1-P
recommended for the comparison of cellulase preparations [339]. An alternative is to use a X4C-labelled cellulose, where the amount of 14C set free in solution can be easily related to the total amount of 14C in the solid substrate [340]. The release of reducing sugars from water-soluble cellulose derivatives such as CMC and HEC has most commonly been used for the determination of endoglucanase activity, since these derivatives are not hydrolyzed by exoglucanases. Viscometric methods, in which the viscosity changes of a CMC solution can be calculated in absolute enzyme units, have also been developed [341,342]. However, this method requires thorough knowledge of the properties of the cellulose derivative to allow for accurate calculations. A zymogram technique using viscous solutions of CMC for the detection of endoglucanases in polyacrylamide gels after isoelectric focusing was also developed [343]. When CMC solutions are applied on blotting papers to be put on top of the gels for a short period of time, detectable reducing sugars are produced where the endoglucanases are located. Measurement of exoglucanase activity in a mixture of cellulolytic enzymes is more difficult. Deshpande et al. [344] used the heterobiosides, p-nitrophenyl-[3D-cellobioside (pNPC) or p-nitrophenyl-13-D-lactoside (pNPL) as selective substrates for the measurement of exoglucanase (cellobiohydrolase) activity. Exoglucanases, splitting off cellobiose units from the non-reducing end of cellulose chains, specifically act on the agluconic bond (between p-nitrophenyl and the disaccharide moiety) and not on the holosidic bond (between the two glucose units in cellobiose). Another procedure used for assay of exoglucanase activity
80
R.C. Kuhad et al.
takes advantage of the enzyme cellobiose: quinone oxidoreductase (CBQ), which in the presence of cellobiose or higher cellodextrins reduces quinones [345]. Exoglucanase activity in mixtures with endoglucanases can be determined using amorphous cellulose [346]. The number of endoglucanase units in the enzyme mixture is determined preferably by the viscometric method by Almin and Eriksson [341], and the amount of reducing sugars (A) produced by the endoglucanase is computed from a standard curve prepared by the use of known amounts of purified endoglucanase towards the same amorphous cellulose. The amount of reducing sugars (B) obtained with the enzyme mixture is then measured. The reducing sugars content (C) released due to exoglucanase activity is estimated as C = B - A . Any problem caused by the presence of [3glucosidase activity in the enzyme mixture can be overcome by addition of 6-gluconolactone, which effectively inhibits the [3-glucosidase activity. Crystalline cellulose cannot be used in this assay, since the synergistic effect obtained from the endo- and exoglucanases will conceal the results. The most commonly used assay methods for [3-glucosidases include measurement of the release of glucose from cellobiose or of p-nitrophenol from p-nitrophenyl-[3-D-glucophyranoside (pNPG) 1-347]. The most specific method used to study the production of glucose from cellobiose is the glucose oxidase/peroxidase method [348]. [3-Glucosidase activity can also be assayed by determining the release of 4-methylumbelliferone from the substrate 4-methylumbelliferyl-[3-glucoside [349]. The most commonly used substrates for the assay of CBQ are reducible quinones such as DCPIP or 3-methoxy-5-tert-butylbenzoquinone (DTBB) [260, 350-352]. The substrate reduction is monitored by the decrease in absorbance at a specific wavelength, 600 nm and 420 nm for DCPIP and DTBB respectively [351,263]. CDH can also reduce both of these substrates. However, only CDH can reduce cytochrome c. Cellobiose phosphorylase activity is commonly assayed spectrophotometrically by measuring the formation of glucose-l-phosphate from cellobiose [146].
3.4 Possibilities for Biotechnology Based on Cellulolytic Enzymes Cellulases have been commercially available for the last 15-20 years. They have attracted a lot of commercial interest because of their many industrial applications in areas such as bioconversion of cellulosic materials, food, textiles, pharmaceuticals, detergents, wastewater treatment, and fruit and vegetable processing (Table 6) [1, 2, 353]. Interest in the application of enzymes in the pulp and paper industry has increased dramatically in recent years. The main application now is to remove inks from recycled papers. More than 40% of the total paper used in the United States is now being recycled. In Europe and Japan this figure is about 55%. Production of market deinked pulp in the US has, over the past six years, increased from 210000 tons to about 1 million tons by the end of 1995 and is
Microorganisms and Enzymes Involved in the Degradation of Plant Fiber Cell Walls
81
Table 6. Applications of cellulolytic enzymes
Field
Applications
Bicconversion
Conversion of cellulosic materials to sugars for production of ethanol, other solvents, organic acids, and single cell protein Biostoning and biopolishing of jeans and other fibers
Textiles Detergents Food
Medical Livestock Pulp and paper Environment
Cellulasesas a componentin detergents Improvementofyieldsin starchand proteinextraction;macerationand colour extraction of fruits and vegetables Additivein digestiveenzymes Feed additiveand silagequalityimprovement Enzymaticdeinking,increaseof freenessof fiber suspensions Waste water treatment/purification
expected to reach 1.8 million tons by the end of 1997. It is estimated that approximately 90% of pre-consumer paper waste and 42% of post-consumer office waste paper (OWP) is likely to be recovered and reused to produce printing/writing paper [354]. The conventional chemical methods for deinking are less well suited for deinking of laser and xerox printed paper for cost-effective production of high quality pulp [355]. Cellulases alone, or in combination with a few other enzymes such as hemicellulases, have been found useful for deinking different types of paper waste. Several reports and patents describing enzymatic deinking have been issued [356-359]. Endoglucanases and endoxylanases have been demonstrated to effectively deink selected old newsprint waste [360] and to improve optical and strength properties of paper from enzymatically deinked pulp. Successful enzymatic deinking of mixed wastepapers, i.e., old newspapers/old magazines (ONP/OMG), using specially formulated mixtures of enzymes followed by flotation to separate the enzymatically released ink from the fibers, has been demonstrated [355]. The enzymatic deinking process also improves freeness (water drainage of the recycled fibers) compared to chemically deinked fibers. Enzymatic deinking represents the first promising biotechnological application of cellulases in the pulp and paper industry. In a short period of time, the use of cellulases has thus made an impressive leap forward. The cellulase-based deinking process offers an environmentally benign way to improve pulp and paper production from recycled waste papers. Cellulases have been successfully used in the textile industry for bio-stoning of jeans and bio-polishing of cotton and other cellulosic fabrics. Traditional stone-washing of jeans involves three steps. After removal of the starch coating of amylases (desizing), the jeans are abraded with pumice stone (1-2 kg/pair of jeans) in large washing machines (abrasion). After this treatment the jeans are washed to remove excess dye. However, the high loading of stones in the washing machines not only decreases the capacity of jean loading but also causes a lot of mechanical wear to both machines and jeans. Cellulases have been shown to effectively facilitate the removal of indigo dye
82
R.C. Kuhadet al.
from the fiber surfaces [361 363]. Enzymatic stone-washing allows for up to 50% higher jean load and provides the desired soft finish. Typically, 100 kg of stones are replaced by 1 kg of enzyme [363]. Two different types of cellulases, neutral and acidic, are generally used, but neutral cellulases are the enzymes of choice because of the decrease in indigo black staining and a wider working pH range. During the last few years, cellulases have also been used for quality improvement of cellulosic fabrics. This process is called "Bio-polishing." Enzymatic bio-polishing is a novel biological finishing process for textiles made from cellulosic fibers such as cotton, rayon, ramie, and tencel. The controlled treatment with acidic cellulases improves softness and water absorbency of the fibres, strongly reduces the tendency for pill formation, and provides a clearer surface structure with less fuzz [361,363]. Also, bio-polishing permanently enhances fabric look, feel and color without any chemical coating of the fibres. Enzymes like proteases and lipases are now commonly used in the detergent industries, but the use of cellulases in this industry is a more recent approach. Soil in the interfiber space of cotton is the most difficult contaminant to remove with common detergents [364]. An alkaline cellulase from a Bacillus sp. has been shown to interact selectively with cellulose in the interior of fibers and remove soil in the interfiber spaces in the presence of usual detergent ingredients [364]. The cleaning power of cellulase-containing detergents shows remarkable improvement. Cellulases are also used to improve silage of cattle feed, i.e., to produce high quality silage from grasses containing only small amounts of water-soluble carbohydrates. Addition of cellulases and hemicellulases helps to release low molecular mass sugars to promote fermentation by lactic acid-producing bacteria. Cellulases, used as feed additives alone or with proteases, have been shown to significantly improve body weight gain in piglets and to improve the quality of pork meat [365]. Enzymatic saccharification of lignocellulosic materials produces monosaccharides, which subsequently can be fermented to a variety of products such as ethanol, other alcohols, organic acids, single cell protein, and lipids. Among various pretreatment methods studied, steam explosion pretreatment at temperatures of 170-250~ was reported to be the most efficient method for preparing lignocellulosic substrates for enzymatic hydrolysis [366]. Steamexploded sugar cane bagasse was saccharified by cellulases produced by T. reesei C-30 [367]. Cellulase preparations, 20 FPU g of substrate, gave 70% saccharification, and could, if supplemented with 13-glucosidase, result in 90% saccharification. A similar effect by addition of [~-glucosidase was observed for saccharification of autohydrolyzed Eucalyptus regnans sawdust [368]. A certain amount of 13-glucosidase is thus critical for achieving efficient saccharification [366]. The cost of enzymes is an important factor for the economy of enzymatic saccharification of lignocellulosic materials. Therefore, the extent to which
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
83
enzymes can be recycled has a significant impact on the production costs of sugar and alcohol [369]. Various recycling methods for cellulases have been discussed, some of which have certain drawbacks. However, the one proposed by Vallander and Eriksson [366], i.e., mixing already saccharified lignocellulosic materials to which enzymes are adsorbed with new substrate, seems to be an efficient way to recycle the enzymes. Bioconversion of glucose of ethanol is a well-documented technology. However, utilization of pentose sugars for ethanol production, (pentoses account for approximately 25% by weight of lignocellulosic materials [23]) is in its infancy. A suitable pentose fermentation technology needs to be developed using pentose (xylose) metabolizing microorganisms [366, 370, 371]. The bioconversion of pentose and hexose sugars to alcohol poses a challenging task for fermentation scientists. Fungal cellulases have been shown to improve the yield of sugars from unmodified malts in the brewing process [372]. In production of alcohol from cassava, addition of Trichoderma cellulases increases ethanol yields by conversion of cellulose to glucose [373]. The isolation of starch from tubers and cereals requires a release of the integrated particles as cleanly as possible. Cereal starches are released and improve yield when amylase-free cellulases and xylanases are applied to the starch slurry prior to centrifugation and washing. Cellulases used to improve and speed up color extraction by pectinases from the skin of fruits also have an important application as a part of an enzyme complex in the maceration of fruits and vegetables. Lignocellulosic wastes from pulp and paper industries, as well as wastes from dairy and agricultural industries, are potential substrates for the production of microbial protein. Two processes have been in commercial operation for such production from wood sugars. The Candida process, using the yeast Candida utilis, started in the beginning of this century, while the Pekilo process, using the fungus Paecilomyces variotii, is more recent [374, 375]. Two other processes for the direct conversion of solid lignocellulosic wastes to protein by fungi have been developed to pilot plant scale. One process using the white rot fungus S. pulverulentum (P. chrysosporium) was developed at the Swedish Pulp and Paper Research Institute (STFI) [376]. The other process, using the mold C. cellulolyticum, was developed at the University of Waterloo, Canada [377]. However, these processes were found not to be economically feasible, since the protein produced could not compete on a cost basis with soybean protein unless the substrate used in the fermentation had a negative value [378]. The STFI approach to protein production based on lignocellulosic substrates was later changed to a waste water treatment/purification process in which the dissolved substances in the white-water system from mechanical pulp production were used as substrates. The process was tested on a large pilot scale in a newsprint paper mill, and was found to have a good potential as a technique to be used for closed white-water systems of mechanical pulp and paper mills [378].
84
R.C. Kuhad et al.
4. D e g r a d a t i o n o f H e m i c e l l u l o s e s
4.1 Microorganisms Producing Hemicellulose-Degrading Enzymes Hemicellulases are widespread, since they are produced by fungi, bacteria from terrestrial and marine environments, rumen microorganisms (protozoa, fungi, and bacteria), yeasts, and marine algae. Fungi, yeasts, and some bacteria secrete hemicellulases extracellularly, although cell wall-bound and intracellular hemicellulolytic enzymes have also been reported [149, 379]. Table 7 lists some important microorganisms producing hemicellulose-degrading enzymes. They are produced both constitutively and inductively. Hemicellulolytic activity is generally associated with an enzyme complex consisting of a variety of enzymes
Table 7. Important microbial sources of hemicellulolytic enzymes
Enzyme
Bacteria
Fungi
[3-1,4-Xylanases
Bacillus pumilus Bacillus subtilis Clostridium acetobutylicum Cellulomonas ada Streptomyces xylophagus
Aspergillus niger Fusarium oxysporum Aspergillus wentii Trichoderma koningii Neurospora crassa
[3-1,4-Xylosidases
Clostridium thermocellum Bacillus pumilus Acetovibrio cellulolyticus
Aspergillus niger Corticium rolfsii Penicillium wortmanni Trichoderma reesei
et-Arabinosidase
Streptomyces pupurascens Bacillus subtilis Ruminococcus albus
Aspergillus niger Cortisium rolfsii Trochoderma reesei
a-Glucuronidase
Trichoderma reesei Agaricus bisporus Pleurotus ostreatus
Esterases
Fibrobacter succinogenes Bacteroides cellulosolvens Clostridium thermocellum
Aspergillus niger Aspergillus phoenicus Trichoderma reesei
[3-1,4-Mannanases
Aerobacter aerogenes Bacillus subtilis Caldocellum saccharolyticum Streptomyces lividans
Aspergillus niger Thielavia terrestris Trichoderma reesei Paecilomyces variotii
[3-1,4-Mannosidase
Bacillus subtilis
Aspergillus niger Aspergillus awamori Thielavia terrestris Polyporus sulphureus
et-Galactosidase
Bacillus subtilis Cellulomonas sp.
Aspergillus niger Sclerotium rolfsii Aspergillus tamarii Mortierella vinacea
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber CellWalls
85
splitting off substituents from the backbone of the polysaccharides as well as depolymerizing this backbone [-23, 148, 380a, 380b]. Most filamentous fungi secrete these complexes of hydrolytic enzymes in response to inductive stimuli [23, 381,382]. Xylanases, mannanases, cellulases and other related enzymes are usually secreted together into the culture media, and selective induction of individual enzymes is not a common mechanism in fungi [,190, 383-386]. Hemicellulolytic enzymes of fungal origin are well characterized and have been studied in detail [23, 387]. Production and characterization of xylanases from several Trichoderma, Aspergillus and Fusarium strains have been reported [149, 388]. Brown-rot fungi such as Tyromyces palustris, Poria placenta and Coniophora cerebella are also potential producers of these enzymes [389, 390]. Of the fungal hemicellulases, those from A. niger have been best characterized [-23, 150]. The three-dimensional structures of several low molecular mass xylanases have recently been reported ~391-393]. The Trichoderma xylanase is ellipsoidal with dimensions 32 A x 42 A. Only a few yeast species such as some species of Aureobasidium, Cryptococcus, and Trichosporon are known to produce xylan-degrading enzymes and are therefore identified as xylanase producers [-23]. Hemicellulases of bacterial origin are less studied, because eukaryotic microbes, such as the filamentous fungi, are better producers of these enzymes. Most of the bacterial studies are confined to species of Bacillus, Streptomyces, Cellulomonas, Thermomonospora, and Chainia sp. Among actinomycetes, the xylan-degrading enzyme systems of some Streptomyces have been studied in some detail, whereas little information is available on the nature and function of hemicellulolytic enzymes produced by other actinomycetes [-23, 394]. The anaerobic bacteria have been reported to be producers of hemicellulosedegrading enzymes. The major bacteria are of the genera Clostridium, Thermoanaerobacter, Acetovibrio, and Bacteroides [23, 395-397]. Khan and coworkers [397] have studied the production of endoxylanases, xylosidases, and esterases from C. thermocellum, A. cellulolyticus, A. cellulosolvens, and B. cellulosolvens. More recently, two acetyl-xylan esterases, two 13-xylosidases, an a-glucuronidase, and a cell-associated endoxylanase have been purified and characterized from the Thermoanaerobacterium sp. strain JW/SL-YS485 [-398-400]. Six distinct ~-xylosidase genes of C. stercorarium 9F-9 have been cloned. One of them (XylA) has been reported to encode a bifunctional protein (xylosidase A) with [3-D-xylosidase and a-L-arabinofuranosidase activities [-401]. However, the gene products do not seem to have two catalytic domains, as both activities resided in one catalytic site.
4.2 Hemicellulolytic Enzymes Xylose and mannose form the backbone of the hemicellulose polymers in wood. Because of complex structure of the hemicelluloses, several different types of enzymes are required for their enzymatic degradation and modification. Among
86
R.C. Kuhad et al.
these, the two major hemicellulose-degrading enzymes are endo-l,4-[3-Dxylanase and endo-l,4-[3-D-mannanase. The water-soluble oligosaccharides are then further hydrolyzed by 1,4-13-D-xylosidase. Moreover, enzymes splitting off side groups and notably, a-c-arabinosidase, a-D-glucuronidase, 0t-D-galactosidase, acetylxylan esterase, and acetylgalactoglucomannan esterases have been found to be of importance for a complete degradation of these heteropolymers [23, 402, 403].
4.2.1 Xylan-Degrading Enzymes A complete degradation of branched xylans requires the concerted action of several different enzymes (Fig. 4), i.e. endoxylanase, [3-xylosidase, e-glucuronidase, e-arabinosidase and acetylxylan esterase. Endoxylanase, the
H
.
H
u.
H
"
I
COOH
o
H
.
!
o.
OH
H
H
H
.Io. ! 0
.
O,e
OH
Araf OI
Ac
lO
- - 4XyN1--4XylOl--4Xyl/31--4Xyl.81--4Xyl/~ 1--4XylOl--4XylOl--4XyL81--4Xyl.81 --4XylO 1-2 2 2 Of
I~
MeGIcA
endo-l,4-O-xylanase
MeGlcA
(EC 3.2.1.8)
Xyl~1--4Xyl/31--
O-xylosidase (EC 3.2.1.37) 9E ~ =-glucuronidase (EC 3.2.1. ) '~
=-L-arabinofuranosidase (EC 3.2.1.55) acetylesterase (EC 3.1.1.6) or acetyl xylan esterase ?
Fig. 4. A hypothetical structure of plant xylan and the linkages attacked by microbial xylandegrading enzymes.The fragmentcomprising5 D-xylose(Xyl)monomersis shown in the upper part of the figure.Ac acetylgroup, ArafL-arabinofuranose, MeGlcA 4-O-methyl-D-glucuronicacid [148]
Microorganismsand EnzymesInvolvedin the Degradationof Plant Fiber Cell Walls
87
most widely studied and best characterized xylanolytic enzyme, attacks the xylan backbone to produce both substituted and nonsubstituted shorter oligomers, xylobiose and xylose. [3-Xylosidase is employed to convert oligomers to xylose and acts in concert with endoxylanases, a-glucuronidase, a-arabinosidase and acetyl-xylan esterase to achieve total hydrolysis of xylans to monosaccharides [148]. Endoxylanases (1,4-[3-D-xylan xylanohydrolase, EC 3.2.1.8) hydrolyze the 1,4-[3-D-xylopyranosyl linkages of xylans such as L-arabino-D-xylan, L-arabinoD-glucurono-D-xylans and D-glucurono-D-xylans. The existence of an exoenzyme (1,4-[3-D-xylan xylohydrolase, EC 3.2.1.37), although much less studied, has also been reported [379]. It appears that the xylosidic linkages in lignocellulosics are not all equivalent and equally accessible to xylanolytic enzymes. The accessibility of some linkages also changes during the course of hydrolysis due to removal of substituents and shortening of the backbone chain [404]. The existence of two types of fungal endoxylanases has been demonstrated, i.e., debranching or arabinose-releasing xylanases and non-debranching or xylotriose-cleaving xylanases [405]. Both types of xylanases are capable of attacking glucuronoxylans and unsubstituted 1,4-[3-D-xylans [149]. A. niger van Tiegham produces three endoxylanases, Xyl I, Xyl II and Xyl III [406]. Hydrolysis of rice straw arabinoxylan by Xyl I resulted in the accumulation of arabinoxylotriose and arabinoxylobiose. These were degraded by Xyl II. However, Xyl III, which had both arabinose-releasing and xylotriose-cleaving activities, did not enhance the hydrolysis of arabinoxylan in addition to what was already accomplished by Xyl I and Xyl II. The non-debranching xylanases degrade heteroxylans randomly. Five xylanases of different specificities were isolated from a commercial enzyme preparation (Rhozyme HP-150 from A. niger) that did not debranch arabinoglucuronoxylans E407]. One of these (20.8 kDa, pI 6.7) degraded heteroxylans and xylose oligosaccharides to mainly xylobiose and xylose. The four other xylanases (1~28 kDa) degraded heteroxylan to xylose oligosaccharides (substituted heteroxylan) but without release of xylose. Vrsanska et al. [408] studied the quantitative binding and hydrolysis of xylose oligosaccharides by an A. niger xylanase. The substrate binding site of the enzyme had seven D-xylosyl binding subsites. Bond cleavage frequencies of oligosaccharides by this enzyme were dependent on substrate concentration. At low substrate concentration, hydrolysis of xylo-oligosaccharides occurred via a (unimolecular) mechanism that yielded xylose from xylotriose, xylobiose from xylotetrose, and xylobiose and xylotriose from xylopentose as major end products. At higher substrate concentrations, there was a deviation from a unimolecular mechanism to one approaching a termolecular shifted hydrolysis with subsequent change in product distribution. Thus, hydrolysis of xylotriose yielded xylobiose, while xylotetrose and xylopentose were prone to transglycosylation reactions resulting in xylooligosaccharides of higher DP, which in turn were subsequently degraded to mainly xylotriose and xylobiose. Both xylobiose and xylose could be utilized as glycosyl acceptors in transglycosylation reactions.
88
R.C. Kuhad et al.
Sporotrichum dimorphosporum degraded redwood arabinoglucuronoxylan mainly to xylose, xylobiose, arabinoxylobiose, arabinoxylotriose, glucarabinoxylotriose, and glucarabinoxylotetrose [409]. Although L-arabinose and D-glucuronic acid were identified at the branch points of the reducing ends of the D-xylosyl chains of the oligosaccharides, they were not released on hydrolysis. The wood-rotting fungus, Trametes hirsutus, was found to produce a xylanase (23 kDa), which degraded willow 4-O-methylglucuronoxylan mainly to xylotetrose, xylopentose and 4-O-methyl derivatives [410]. Species of Trichoderma have long been known to produce xylanases. These enzymes are generally produced along with cellulases during growth on lignocellulosic materials. Trichoderma xylanases have been found to be active on xylans from different sources, usually producing xylooligomers, xylobiose and xylose. Xylose is not the major product and it is typically produced after an accumulation of xylo-oligomers [411]. Partially deacetylated xylo-oligomers were found to be more accessible than acetylated xylo-oligomers to hydrolysis by xylanases. Most of the Trichoderma endoxylanases appear to lack activity for removing the arbinosyl