Springer Handbook of Experimental Solid Mechanics
Springer Handbooks provide a concise compilation of approved key information on methods of research, general principles, and functional relationships in physical sciences and engineering. The world’s leading experts in the fields of physics and engineering will be assigned by one or several renowned editors to write the chapters comprising each volume. The content is selected by these experts from Springer sources (books, journals, online content) and other systematic and approved recent publications of physical and technical information. The volumes are designed to be useful as readable desk reference books to give a fast and comprehensive overview and easy retrieval of essential reliable key information, including tables, graphs, and bibliographies. References to extensive sources are provided.
Springer
Handbook of Experimental Solid Mechanics Sharpe (Ed.) With DVD-ROM, 874 Figures, 58 in four color and 50 Tables
123
Editor: Professor William N. Sharpe, Jr. Department of Mechanical Engineering Room 126, Latrobe Hall The Johns Hopkins University 3400 North Charles Street Baltimore, MD 21218-2681, USA
[email protected]
Library of Congress Control Number:
ISBN: 978-0-387-26883-5
2008920731
e-ISBN: 978-0-387-30877-7
c 2008, Springer Science+Business Media, LLC New York All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer Science+Business Media, LLC New York, 233 Spring Street, New York, NY 10013, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks, and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights. The use of designations, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Product liability: The publisher cannot guarantee the accuracy of any information about dosage and application contained in this book. In every individual case the user must check such information by consulting the relevant literature. Production and typesetting: le-tex publishing services oHG, Leipzig Senior Manager Springer Handbook: Dr. W. Skolaut, Heidelberg Typography and layout: schreiberVIS, Seeheim Illustrations: Hippmann GbR, Schwarzenbruck Cover design: eStudio Calamar Steinen, Barcelona Cover production: WMXDesign GmbH, Heidelberg Printing and binding: Stürtz GmbH, Würzburg Printed on acid free paper SPIN 11510079
9085/3820/YL
543210
V
Preface to Handbook on Experimental Stress Analysis
Experimental science does not receive Truth from superior Sciences: she is the Mistress and the other sciences are her servants ROGER BACON: Opus Tertium. Stress analysis has been regarded for some time as a distinct professional branch of engineering, the object of which is the determination and improvement of the mechanical strength of structures and machines. Experimental stress analysis strives to achieve these aims by experimental means. In doing so it does not remain, however, a mere counterpart of theoretical methods of stress analysis but encompasses those, utilizing all the conclusions reached by theoretical considerations, and goes far beyond them in maintaining direct contact with the true physical characteristics of the problems under considerations. Many factors make the experimental approach indispensable, and often the only means of access, in the investigation of problems of mechanical strength. At our present state of knowledge it is remarkable how quickly we can reach the limit of applicability of mathematical methods of stress analysis, and there is a multitude of comparatively simple, and in practice frequently occurring, stress problems for which no theoretical solutions have yet been obtained. In addition to this, theoretical considerations are usually based on simplifying assumptions which imply certain detachment from reality, and it can be decided only by experimentation whether such idealization has not resulted in an undue distortion of the essential features of the problem. No such doubt needs to enter experimental stress analysis, especially if it is done under actual service conditions, where all the factors due to the properties of the employed materials, the methods of manufacture, and the conditions of operation are fully represented. The advantage of the experimental approach becomes especially obvious if we consider that it is possible to determine experimentally the stress distribution in a machine part in actual operation without knowing the nature of the forces acting on the part under these circumstances, which proposition is clearly inaccessible to any theoretical method of analysis. To these major advantages we may add one more, from the point of view of the average practicing engineer, whose mathematical preparation is not likely to enable him to
deal theoretically with some of the complex strength problems which he, nevertheless, is expected to settle satisfactorily. To these men experimental methods constitute a recourse that is more readily accessible and that, with proper care and perseverance, is most likely to furnish the needed information. Several principal methods and literally hundreds of individual tools and artifices constitute the “arsenal” of the experimental stress analyst. It is interesting to observe, however, that each of these devices, no matter how peculiar it sometimes appears to be, has its characteristic feature and, with it, some unique advantage that may render this tool most suitable for the investigation of a particular problem. The stress analyst cannot afford, therefore, to ignore any of these possibilities. This circumstance, together with the ever-increasing demand on mechanical strength, will always tend to keep experimental stress analysis a distinct entity in the field of technical sciences. There has been a long-felt need of a comprehensive reference book of this nature, but, at the same time, it was recognized that no one person could possibly write with authority on all the major experimental procedures that are being used at present in the investigation of mechanical strength. It was proposed therefore that the problem could be solved only by a concerted effort which might be initiated most suitably under the aegis of the Society for Experimental Stress Analysis, and the writer was appointed as editor with complete freedom to proceed with the organization of this undertaking. Invitations were sent to thirty eminent engineers and scientists who were best known for their outstanding contributions in one or more of the specific branches of experimental stress analysis. It was most impressive to witness the readiness and understanding with which these men, many of them not even associated with the Society, responded to the request and joined the editor in contributing their work, without remuneration, to the furtherance of the aims of the Society, which thus becomes the sole recipient of all royalties from this publication. This being the first comprehensive publication in its field, it may be of general interest to say a few words about the method used in the planning and coordina-
VI
tion of the material. In inviting the contributors, I first briefly out-lined the subject to be covered requesting, in return, from each author a more detailed outline of what he would propose on his respective subject. These authors’ outlines were subsequently collected in a booklet, a copy of which was sent to each participant, thus informing him in advance of projected contents of all the other parts of the book. This scheme proved of considerable help in assuring adequate coverage of all matters of interest, without undue overlaps, repetition, or need of frequent cross references. In the final plan, as seen in the table of contents, the main body of the book was divided into 18 chapters, each dealing with either a principal method, from mechanical gages to x-ray analysis, or a major topic of interest, such as residual stresses, interpretation of service fractures, or analogies. In addition to these, an appendix was devoted to the discussion of three theoretical subjects which are of fundamental importance in the planning and interpretation of experimental stress work. In the final outcome, not only the book as a whole but also most of the individual chap-
ters turned out to be pioneering ventures in their own rights, often constituting the first systematic exposition of their respective subject matter. Another innovation was undertaken in the treatment of bibliographical references, where an effort was made to review briefly the contents of each entry, since it was found that the mere titles of technical articles seldom convey a satisfactory picture of their respective contents. Despite all precautions the book is bound to have errors and shortcomings, and it is the sincere hope of the editor that users of the book will not hesitate to inform him of possibilities of improvement which may be incorporated in a later edition. In the course of this work the editor was greatly aided by advice from numerous friends and colleagues, among whom he wishes to acknowledge in particular the invaluable help received from B. F. Langer, R. D. Mindlin, W. M. Murray, R. E. Peterson, and G. Pickett. Evanston, Illinois April 1950
M. Hetenyi
VII
Preface to the Handbook on Experimental Mechanics, First Edition
The Handbook on Experimental Stress Analysis, which was published under the aegis of the Society for Experimental Stress Analysis in 1950, has been the comprehensive and authoritative reference in our field for more than thirty years. Under the able editorship of the late M. Herenyi, 31 authors contributed without compensation 18 chapters and 3 appendices to this handbook. It received international acclaim and brought considerable income to the Society for Experimental Mechanics. Since 1950, new experimental techniques, such as holography, laser speckle interferometry, geometric moire, moire interferometry, optical heterodyning, and modal analysis, have emerged as practical tools in the broader field of experimental mechanics. The emergence of new materials and new disciplines, such as composite materials and fracture mechanics, resulted in the evolution of traditional experimental techniques to new fields such as orthotropic photoelasticity and experimental fracture mechanics. These new developments, together with the explosive uses of on/off-line computers for rapid data processing and the combined use of experimental and numerical techniques, have expanded the capabilities of experimental mechanics far beyond those of the 1950s. Sensing the need to update the handbook, H. F. Brinson initiated the lengthy process of revising the
handbook during his 1978-79 presidency of the Society. Since M. Hetenyi could not undertake the contemplated revision at that time, the decision was made to publish a new handbook under a new editor. Opinions ranging from topical coverage to potential contributors were solicited from various SEM members, and after a short respite I was chosen as editor by the ad hoc Handbook Committee chaired by J. B. Ligon. Despite the enormous responsibility, our task was made easier by inheriting the legacy of the Herenyi Handbook and the numerous suggestions that were collected by H. Brinson. The new handbook, appropriately entitled Handbook on Experimental Mechanics, is dedicated to Dr. Hetenyi. Twenty-five authors have contributed 21 chapters that include, among others, the new disciplines and developments that are mentioned above. The handbook emphasizes the principles of the experimental techniques and de-emphasizes the procedures that evolve with time. I am grateful to the contributors, who devoted many late afterhours in order to meet the manuscript deadlines and to J. B. Ligon who readily provided welcomed assistance during the trying times associated with this editorship.
Albert S. Kobayashi 1987
VIII
Preface to the Handbook on Experimental Mechanics, Second Edition
Since the publication of the first edition, considerable progress has been made in automated image processing, greatly reducing the heretofore laborious task of evaluating photoelastic and moire fringe patterns. It is therefore appropriate to add Chapter 21: “Digital Image Processing” before the final chapter, “Statistical Analysis of Experimental Data.” Apart from the new chapter, this second edition is essentially same as the first edition with minor corrections and updating. Exceptions to this are the addition of a section on optical fiber sensors in Chapter 2: “Strain Gages,” and extensive additions to
Chapter 14, which is retitled “Thermal Stress Analysis,” and to Chapter 16: “Experimental Modal Analysis.” To reiterate, the purpose of this handbook is to document the principles involved in experimental mechanics rather than the procedures and hardware, which evolve over time. To that extent, we, the twenty-seven authors, judging from the many appreciative comments which were received upon the publication of the first edition, have succeeded. Albert S. Kobayashi April 1993
IX
Preface
This handbook is a revision and expansion of the Handbook on Experimental Mechanics published by the Society for Experimental Mechanics in 1987 with a second edition in 1993 – both edited by Albert Kobayashi. All three of these trace a direct lineage to the seminal Handbook of Experimental Stress Analysis conceived and edited by Miklós Hetényi in 1950 and they encapsulate the history of the field. In 1950, the capability of measuring strains on models and structures was just becoming widely available. Engineers were still making their own wire resistance foil gages, and photoelasticity measurements required film processing. Conversion of these measurements to stresses relied on slide rules and graph paper. Now, foil resistance gages are combined with automatic data acquisition, and photoelasticity is just as automated. Input from both experimental methods is combined with finite element analysis to present stress variations in color on a computer screen. The focus then was on large structures such as airframes; in fact, the efforts of the Society for Experimental Stress Analysis (founded in 1938) were crucial to the rapid development of aircraft in the 1940s. While measurements on large structures continue to be important, researchers today also measure the mechanical properties of specimens smaller than a human hair. The field is completely different now. Experimental techniques and applications have expanded (or contracted if you prefer) from stress analysis of large structures to include the electromechanical analysis of micron-sized sensors and actuators. Those changes – occurring gradually over the early years but now more rapidly – led to a change in the society name to the Society for Experimental Mechanics. Those changes also have led to the expansion of the current volume with the deletion of some topics and the addition of others
in order to address these emerging topics in the “micro world”. This volume presents experimental solid mechanics as it is practiced in the early part of the 21st century. It is a field that is important as a technology and rich in research opportunities. A striking feature of this handbook is that 20 of the 36 chapters are on topics that have arisen or matured in the 15 years since the last edition; and, in most cases, these have been written by relatively young researchers and practitioners. Consider microelectromechanical systems (MEMS), for example. That technology, originated by electrical engineers only 25 years ago, now permeates our lives. It was soon learned that designers and manufacturers needed better understanding of the mechanical properties of the new materials involved, and experimental mechanists became involved only 15 years ago. That is just one example; several of the chapters speak to it as well as similar completely new topics. The reader will find in this volume not only information on the traditional areas of experimental solid mechanics, but on new and emerging topics as well. This revision was initiated by the Executive Board of the Society and managed by the very capable staff at Springer, in particular Elaine Tham, Werner Skolaut, and Lauren Danahy. Sound advice was provided over the course of the effort by Jim Dally and Tom Proulx. However, the real work was done by the authors. Each chapter was written by authors, who are not only experts, but who volunteered to contribute to this Handbook. Although they are thoroughly familiar with the technical details, it still required a major effort on their part to prepare a chapter. On behalf of the Society and Springer, I acknowledge and thank them. Baltimore June 2008
William N. Sharpe, Jr.
XI
About the Editor
William N. Sharpe, Jr. holds the Alonzo G. Decker Chair in Mechanical Engineering at the Johns Hopkins University where he served as department chairman for 11-1/2 years. His early research focused on laser-based strain measurement over very short gage lengths to study plasticity and fracture behavior. The past fifteen years have been devoted to development and use of experimental methods to measure the mechanical properties of materials used in microelectromechanical systems. He is a Fellow and Past President of the Society for Experimental Mechanics from which he received the Murray Medal. The American Society of Mechanical Engineers awarded him the Nadai Award as well as Fellow grade. He has received an Alexander von Humboldt Award along with the Roe Award from the American Society of Engineering Education.
XIII
List of Authors Jonathan D. Almer Argonne National Laboratory 9700 South Cass Avenue Argonne, IL 60439, USA e-mail:
[email protected] Archie A.T. Andonian The Goodyear Tire & Rubber Co. D/410F 142 Goodyear Boulevard Akron, OH 44305, USA e-mail:
[email protected] Satya N. Atluri University of California Department of Mechanical & Aerospace Engineering, Center for Aeorspace Research & Education 5251 California Avenue, Suite 140 Irvine, CA 92612, USA David F. Bahr Washington State University Mechanical and Materials Engineering Pullman, WA 99164, USA e-mail:
[email protected] Chris S. Baldwin Aither Engineering, Inc. 4865 Walden Lane Lanham, MD 20706, USA e-mail:
[email protected] Stephen M. Belkoff Johns Hopkins University International Center for Orthopaedic Advancement, Department of Orthopaedic Surgery, Bayview Medical Center 5210 Eastern Avenue Baltimore, MD 21224, USA e-mail:
[email protected] Hugh Bruck University of Maryland Department of Mechanical Engineering College Park, MD 20742, USA e-mail:
[email protected]
Ioannis Chasiotis University of Illinois at Urbana-Champaign Aerospace Engineering Talbot Lab, 104 South Wright Street Urbana, IL 61801, USA e-mail:
[email protected] Gary Cloud Michigan State University Mechanical Engineering Department East Lansing, MI 48824, USA e-mail:
[email protected] Wendy C. Crone University of Wisconsin Department of Engineering Physics 1500 Engineering Drive Madison, WI 53706, USA e-mail:
[email protected] James W. Dally University of Maryland 5713 Glen Cove Drive Knoxville, TN 37919, USA e-mail:
[email protected] James F. Doyle Purdue University School of Aeronautics & Astronautics West Lafayette, IN 47907, USA e-mail:
[email protected] Igor Emri University of Ljubljana Center for Experimental Mechanics Cesta na brdo 85 Lubljana, SI-1125, Slovenia e-mail:
[email protected] Yimin Gan Universität GH Kassel Fachbereich 15 – Maschinenbau Mönchebergstr. 7 34109 Kassel, Germany e-mail:
[email protected]
XIV
List of Authors
Ashok Kumar Ghosh New Mexico Tech Mechanical Engineering and Civil Engineering Socorro, NM 87801, USA e-mail:
[email protected]
Peter G. Ifju University of Florida Mechanical and Aerospace Engineering Gainesville, FL 32611, USA e-mail:
[email protected]
Richard J. Greene The University of Sheffield Department of Mechanical Engineering Mappin Street Sheffield, S1 3JD, UK e-mail:
[email protected]
Wolfgang G. Knauss California Institute of Technology-GALCIT 105-50 1201 East California Boulevard Pasadena, CA 91125, USA e-mail:
[email protected]
Bongtae Han University of Maryland Mechanical Engineering Department College Park, MD 20742, USA e-mail:
[email protected]
Albert S. Kobayashi University of Washington Department of Mechanical Engineering Seattle, Washington 98195-2600, USA e-mail:
[email protected]
M. Amanul Haque Pennsylvania State University Department of Mechanical Engineering 317A Leonhard Building University Park, PA 16802, USA e-mail:
[email protected]
Sridhar Krishnaswamy Northwestern University Center for Quality Engineering & Failure Prevention Evanston, IL 60208-3020, USA e-mail:
[email protected]
Craig S. Hartley El Arroyo Enterprises LLC 231 Arroyo Sienna Drive Sedona, AZ 86332, USA e-mail:
[email protected] Roger C. Haut Michigan State University College of Osteopathic Medicine, Orthopaedic Biomechanics Laboratories A407 East Fee Hall East Lansing, MI 48824, USA e-mail:
[email protected] Jay D. Humphrey Texas A&M University Department of Biomedical Engineering 335L Zachry Engineering Center, 3120 TAMU College Station, TX 77843-3120, USA e-mail:
[email protected]
Yuri F. Kudryavtsev Integrity Testing Laboratory Inc. PreStress Engineering Division 80 Esna Park Drive Markham, Ontario L3R 2R7, Canada e-mail:
[email protected] Pradeep Lall Auburn University Department of Mechanical Engineering Center for Advanced Vehicle Electronics 201 Ross Hall Auburn, AL 36849-5341, USA e-mail:
[email protected] Kenneth M. Liechti University of Texas Aerospace Engineering and Engineering Mechanics Austin, TX 78712, USA e-mail:
[email protected]
List of Authors
Hongbing Lu Oklahoma State University School of Mechanical and Aerospace Engineering 218 Engineering North Stillwater, OK 74078, USA e-mail:
[email protected] Ian McEnteggart Instron Coronation Road, High Wycombe Buckinghamshire, HP12 3SY, UK Dylan J. Morris National Institute of Standards and Technology Materials Science and Engineering Laboratory Gaithersburg, MD 20877, USA e-mail:
[email protected] Sia Nemat-Nasser University of California Department of Mechanical and Aerospace Engineering 9500 Gilman Drive La Jolla, CA 92093-0416, USA e-mail:
[email protected] Wolfgang Osten Universität Stuttgart Institut für Technische Optik Pfaffenwaldring 9 70569 Stuttgart, Germany e-mail:
[email protected] Eann A. Patterson Michigan State University Department of Mechanical Engineering 2555 Engineering Building East Lansing, MI 48824-1226, USA e-mail:
[email protected] Daniel Post Virginia Polytechnic Institute and State University (Virginia Tech) Department of Engineering Science and Mechanics Blacksburg, VA 24061, USA e-mail:
[email protected]
Ryszard J. Pryputniewicz Worcester Polytechnic Institute NEST – NanoEngineering, Science, and Technology CHSLT – Center for Holographic Studies and Laser Micro-Mechatronics Worcester, MA 01609, USA e-mail:
[email protected] Kaliat T. Ramesh Johns Hopkins University Department of Mechanical Engineering 3400 North Charles Street Baltimore, MD 21218, USA e-mail:
[email protected] Krishnamurthi Ramesh Indian Institute of Technology Madras Department of Applied Mechanics Chennai, 600 036, India e-mail:
[email protected] Krishnaswamy Ravi-Chandar University of Texas at Austin 1 University Station, C0600 Austin, TX 78712-0235, USA e-mail:
[email protected] Guruswami Ravichandran California Institute of Technology Graduate Aeronautical Laboratories Pasadena, CA 91125, USA e-mail:
[email protected] Robert E. Rowlands University of Wisconsin Department of Mechanical Engineering 1415 Engineering Drive Madison, WI 53706, USA e-mail:
[email protected] Taher Saif University of Illinois at Urbana-Champaign Micro and Nanotechnology Laboratory, 2101D Mechanical Engineering Laboratory 1206 West Green Street Urbana, IL 61801, USA e-mail:
[email protected] Wolfgang Steinchen (deceased)
XV
XVI
Jeffrey C. Suhling Auburn University Department of Mechanical Engineering 201 Ross Hall Auburn, AL 36849-5341, USA e-mail:
[email protected] Michael A. Sutton University of South Carolina Center for Mechanics, Materials and NDE Department of Mechanical Engineering 300 South Main Street Columbia, SC 29208, USA e-mail:
[email protected]
Robert B. Watson Vishay Micro-Measurements Sensors Engineering Department Raleigh, NC, USA e-mail:
[email protected] Robert A. Winholtz University of Missouri Department of Mechanical and Aerospace Engineering E 3410 Lafferre Hall Columbia, MO 65211, USA e-mail:
[email protected]
XVII
Contents
List of Abbreviations ................................................................................. XXVII
Part A Solid Mechanics Topics 1 Analytical Mechanics of Solids Albert S. Kobayashi, Satya N. Atluri .......................................................... 1.1 Elementary Theories of Material Responses ..................................... 1.2 Boundary Value Problems in Elasticity ............................................ 1.3 Summary ...................................................................................... References ..............................................................................................
3 4 11 14 14
2 Materials Science for the Experimental Mechanist Craig S. Hartley ........................................................................................ 2.1 Structure of Materials .................................................................... 2.2 Properties of Materials................................................................... References ..............................................................................................
17 17 33 47
3 Mechanics of Polymers: Viscoelasticity Wolfgang G. Knauss, Igor Emri, Hongbing Lu ............................................ 3.1 Historical Background.................................................................... 3.2 Linear Viscoelasticity ..................................................................... 3.3 Measurements and Methods .......................................................... 3.4 Nonlinearly Viscoelastic Material Characterization ........................... 3.5 Closing Remarks ............................................................................ 3.6 Recognizing Viscoelastic Solutions if the Elastic Solution is Known ... References ..............................................................................................
49 49 51 69 84 89 90 92
4 Composite Materials Peter G. Ifju ............................................................................................. 4.1 Strain Gage Applications ................................................................ 4.2 Material Property Testing ............................................................... 4.3 Micromechanics ............................................................................ 4.4 Interlaminar Testing ...................................................................... 4.5 Textile Composite Materials............................................................ 4.6 Residual Stresses in Composites ..................................................... 4.7 Future Challenges.......................................................................... References ..............................................................................................
97 98 102 107 111 114 117 121 121
5 Fracture Mechanics Krishnaswamy Ravi-Chandar ................................................................... 5.1 Fracture Mechanics Based on Energy Balance ................................. 5.2 Linearly Elastic Fracture Mechanics .................................................
125 126 128
XVIII
Contents
5.3 Elastic–Plastic Fracture Mechanics .................................................. 5.4 Dynamic Fracture Mechanics .......................................................... 5.5 Subcritical Crack Growth ................................................................ 5.6 Experimental Methods................................................................... References ..............................................................................................
132 137 140 140 156
6 Active Materials Guruswami Ravichandran ........................................................................ 6.1 Background .................................................................................. 6.2 Piezoelectrics ................................................................................ 6.3 Ferroelectrics ................................................................................ 6.4 Ferromagnets ................................................................................ References ..............................................................................................
159 159 161 162 166 167
7 Biological Soft Tissues Jay D. Humphrey ..................................................................................... 7.1 Constitutive Formulations – Overview ............................................ 7.2 Traditional Constitutive Relations ................................................... 7.3 Growth and Remodeling – A New Frontier ...................................... 7.4 Closure ......................................................................................... 7.5 Further Reading ............................................................................ References ..............................................................................................
169 171 172 178 182 182 183
8 Electrochemomechanics of Ionic Polymer–Metal Composites Sia Nemat-Nasser .................................................................................... 8.1 Microstructure and Actuation ......................................................... 8.2 Stiffness Versus Solvation............................................................... 8.3 Voltage-Induced Cation Distribution .............................................. 8.4 Nanomechanics of Actuation ......................................................... 8.5 Experimental Verification .............................................................. 8.6 Potential Applications ................................................................... References ..............................................................................................
187 188 191 193 195 197 199 199
9 A Brief Introduction to MEMS and NEMS Wendy C. Crone ........................................................................................ 9.1 Background .................................................................................. 9.2 MEMS/NEMS Fabrication ................................................................. 9.3 Common MEMS/NEMS Materials and Their Properties ....................... 9.4 Bulk Micromachining versus Surface Micromachining ...................... 9.5 Wafer Bonding .............................................................................. 9.6 Soft Fabrication Techniques ........................................................... 9.7 Experimental Mechanics Applied to MEMS/NEMS.............................. 9.8 The Influence of Scale.................................................................... 9.9 Mechanics Issues in MEMS/NEMS ..................................................... 9.10 Conclusion .................................................................................... References ..............................................................................................
203 203 206 206 213 214 215 217 217 221 224 225
Contents
10 Hybrid Methods James F. Doyle ......................................................................................... 10.1 Basic Theory of Inverse Methods .................................................... 10.2 Parameter Identification Problems ................................................. 10.3 Force Identification Problems ........................................................ 10.4 Some Nonlinear Force Identification Problems ................................ 10.5 Discussion of Parameterizing the Unknowns ................................... References ..............................................................................................
229 231 235 240 246 255 257
11 Statistical Analysis of Experimental Data James W. Dally ........................................................................................ 11.1 Characterizing Statistical Distributions ............................................ 11.2 Statistical Distribution Functions .................................................... 11.3 Confidence Intervals for Predictions ............................................... 11.4 Comparison of Means .................................................................... 11.5 Statistical Safety Factor .................................................................. 11.6 Statistical Conditioning of Data ...................................................... 11.7 Regression Analysis ....................................................................... 11.8 Chi-Square Testing ........................................................................ 11.9 Error Propagation .......................................................................... References ..............................................................................................
259 260 263 267 270 271 272 272 277 278 279
Part B Contact Methods 12 Bonded Electrical Resistance Strain Gages Robert B. Watson ..................................................................................... 12.1 Standardized Strain-Gage Test Methods ......................................... 12.2 Strain and Its Measurement ........................................................... 12.3 Strain-Gage Circuits....................................................................... 12.4 The Bonded Foil Strain Gage .......................................................... 12.5 Semiconductor Strain Gages ........................................................... References ..............................................................................................
283 284 284 285 291 325 332
13 Extensometers Ian McEnteggart ...................................................................................... 13.1 General Characteristics of Extensometers ........................................ 13.2 Transducer Types and Signal Conditioning ...................................... 13.3 Ambient-Temperature Contacting Extensometers............................ 13.4 High-Temperature Contacting Extensometers ................................. 13.5 Noncontact Extensometers............................................................. 13.6 Contacting versus Noncontacting Extensometers ............................. 13.7 Conclusions ................................................................................... References ..............................................................................................
335 336 337 338 341 343 345 346 346
XIX
XX
Contents
14 Optical Fiber Strain Gages Chris S. Baldwin ...................................................................................... 14.1 Optical Fiber Basics........................................................................ 14.2 General Fiber Optic Sensing Systems ............................................... 14.3 Interferometry .............................................................................. 14.4 Scattering ..................................................................................... 14.5 Fiber Bragg Grating Sensors ........................................................... 14.6 Applications of Fiber Optic Sensors ................................................. 14.7 Summary ...................................................................................... References ..............................................................................................
347 348 351 354 359 361 367 368 369
15 Residual Stress Yuri F. Kudryavtsev .................................................................................. 15.1 Importance of Residual Stress ........................................................ 15.2 Residual Stress Measurement ......................................................... 15.3 Residual Stress in Fatigue Analysis ................................................. 15.4 Residual Stress Modification .......................................................... 15.5 Summary ...................................................................................... References ..............................................................................................
371 371 373 381 383 386 386
16 Nanoindentation: Localized Probes of Mechanical Behavior
of Materials David F. Bahr, Dylan J. Morris .................................................................. 16.1 Hardness Testing: Macroscopic Beginnings...................................... 16.2 Extraction of Basic Materials Properties from Instrumented Indentation ..................................................... 16.3 Plastic Deformation at Indentations ............................................... 16.4 Measurement of Fracture Using Indentation ................................... 16.5 Probing Small Volumes to Determine Fundamental Deformation Mechanisms ..................... 16.6 Summary ...................................................................................... References ..............................................................................................
402 404 404
17 Atomic Force Microscopy in Solid Mechanics Ioannis Chasiotis ..................................................................................... 17.1 Tip–Sample Force Interactions in Scanning Force Microscopy ........... 17.2 Instrumentation for Atomic Force Microscopy.................................. 17.3 Imaging Modes by an Atomic Force Microscope ............................... 17.4 Quantitative Measurements in Solid Mechanics with an AFM ........... 17.5 Closing Remarks ............................................................................ 17.6 Bibliography ................................................................................. References ..............................................................................................
409 411 412 423 432 438 439 440
389 389 392 396 399
Contents
Part C Noncontact Methods 18 Basics of Optics Gary Cloud ............................................................................................... 18.1 Nature and Description of Light ..................................................... 18.2 Interference of Light Waves ........................................................... 18.3 Path Length and the Generic Interferometer................................... 18.4 Oblique Interference and Fringe Patterns ....................................... 18.5 Classical Interferometry ................................................................. 18.6 Colored Interferometry Fringes ....................................................... 18.7 Optical Doppler Interferometry ....................................................... 18.8 The Diffraction Problem and Examples ........................................... 18.9 Complex Amplitude ....................................................................... 18.10 Fraunhofer Solution of the Diffraction Problem ............................... 18.11 Diffraction at a Clear Aperture ........................................................ 18.12 Fourier Optical Processing .............................................................. 18.13 Further Reading ............................................................................ References .............................................................................................. 19 Digital Image Processing for Optical Metrology Wolfgang Osten ....................................................................................... 19.1 Basics of Digital Image Processing .................................................. 19.2 Techniques for the Quantitative Evaluation of Image Data in Optical Metrology ...................................................................... 19.3 Techniques for the Qualitative Evaluation of Image Data in Optical Metrology ...................................................................... References ..............................................................................................
447 448 449 451 453 455 461 464 468 470 472 474 476 479 479
481 483 485 545 557
20 Digital Image Correlation for Shape
and Deformation Measurements Michael A. Sutton .................................................................................... 20.1 20.2 20.3 20.4 20.5 20.6 20.7 20.8 20.9 20.10
Background .................................................................................. Essential Concepts in Digital Image Correlation ............................... Pinhole Projection Imaging Model.................................................. Image Digitization ......................................................................... Intensity Interpolation .................................................................. Subset-Based Image Displacements ............................................... Pattern Development and Application ............................................ Two-Dimensional Image Correlation (2-D DIC)................................. Three-Dimensional Digital Image Correlation.................................. Two-Dimensional Application: Heterogeneous Material Property Measurements............................. 20.11 Three-Dimensional Application: Tension Torsion Loading of Flawed Specimen.................................. 20.12 Three-Dimensional Measurements – Impact Tension Torsion Loading of Single-Edge-Cracked Specimen ..................................... 20.13 Closing Remarks ............................................................................
565 566 568 569 573 573 575 577 579 581 585 588 593 597
XXI
XXII
Contents
20.14 Further Reading ............................................................................ References ..............................................................................................
597 599
21 Geometric Moiré Bongtae Han, Daniel Post ........................................................................ 21.1 Basic Features of Moiré .................................................................. 21.2 In-Plane Displacements ................................................................ 21.3 Out-Of-Plane Displacements: Shadow Moiré .................................. 21.4 Shadow Moiré Using the Nonzero Talbot Distance (SM-NT) ............... 21.5 Increased Sensitivity...................................................................... References ..............................................................................................
601 601 607 611 617 623 626
22 Moiré Interferometry Daniel Post, Bongtae Han ........................................................................ 22.1 Current Practice ............................................................................. 22.2 Important Concepts ....................................................................... 22.3 Challenges .................................................................................... 22.4 Characterization of Moiré Interferometry ........................................ 22.5 Moiré Interferometry in the Microelectronics Industry ..................... References ..............................................................................................
627 630 634 644 645 646 652
23 Speckle Methods Yimin Gan, Wolfgang Steinchen (deceased)............................................... 23.1 Laser Speckle ................................................................................ 23.2 Speckle Metrology ......................................................................... 23.3 Applications .................................................................................. 23.4 Bibliography ................................................................................. References ..............................................................................................
655 655 658 668 672 672
24 Holography Ryszard J. Pryputniewicz .......................................................................... 24.1 Historical Development.................................................................. 24.2 Fundamentals of Holography ......................................................... 24.3 Techniques of Hologram Interferometry.......................................... 24.4 Representative Applications of Holography ..................................... 24.5 Conclusions and Future Work ......................................................... References ..............................................................................................
675 676 677 679 685 696 697
25 Photoelasticity Krishnamurthi Ramesh ............................................................................ 25.1 Preliminaries ................................................................................ 25.2 Transmission Photoelasticity .......................................................... 25.3 Variants of Photoelasticity ............................................................. 25.4 Digital Photoelasticity.................................................................... 25.5 Fusion of Digital Photoelasticity Rapid Prototyping and Finite Element Analysis ........................................................... 25.6 Interpretation of Photoelasticity Results .........................................
701 704 705 710 719 732 734
Contents
25.7 Stress Separation Techniques ......................................................... 25.8 Closure ......................................................................................... 25.9 Further Reading ............................................................................ 25.A Appendix ...................................................................................... References ..............................................................................................
735 737 737 738 740
26 Thermoelastic Stress Analysis Richard J. Greene, Eann A. Patterson, Robert E. Rowlands ......................... 26.1 History and Theoretical Foundations .............................................. 26.2 Equipment .................................................................................... 26.3 Test Materials and Methods ........................................................... 26.4 Calibration .................................................................................... 26.5 Experimental Considerations.......................................................... 26.6 Applications .................................................................................. 26.7 Summary ...................................................................................... 26.A Analytical Foundation of Thermoelastic Stress Analysis .................... 26.B List of Symbols .............................................................................. References ..............................................................................................
743 744 745 747 749 749 753 759 760 762 763
27 Photoacoustic Characterization of Materials Sridhar Krishnaswamy ............................................................................. 27.1 Elastic Wave Propagation in Solids ................................................. 27.2 Photoacoustic Generation .............................................................. 27.3 Optical Detection of Ultrasound...................................................... 27.4 Applications of Photoacoustics ....................................................... 27.5 Closing Remarks ............................................................................ References ..............................................................................................
769 770 777 783 789 798 798
28 X-Ray Stress Analysis Jonathan D. Almer, Robert A. Winholtz ..................................................... 28.1 Relevant Properties of X-Rays ........................................................ 28.2 Methodology ................................................................................. 28.3 Micromechanics of Multiphase Materials ........................................ 28.4 Instrumentation ............................................................................ 28.5 Experimental Uncertainties ............................................................ 28.6 Case Studies .................................................................................. 28.7 Summary ...................................................................................... 28.8 Further Reading ............................................................................ References ..............................................................................................
801 802 804 807 809 810 813 817 818 818
Part D Applications 29 Optical Methods Archie A.T. Andonian ............................................................................... 29.1 Photoelasticity .............................................................................. 29.2 Electronic Speckle Pattern Interferometry .......................................
823 824 828
XXIII
XXIV
Contents
29.3 Shearography and Digital Shearography ......................................... 29.4 Point Laser Triangulation ............................................................... 29.5 Digital Image Correlation ............................................................... 29.6 Laser Doppler Vibrometry ............................................................... 29.7 Closing Remarks ............................................................................ 29.8 Further Reading ............................................................................ References ..............................................................................................
830 831 832 834 835 836 836
30 Mechanical Testing at the Micro/Nanoscale M. Amanul Haque, Taher Saif ................................................................... 30.1 Evolution of Micro/Nanomechanical Testing .................................... 30.2 Novel Materials and Challenges...................................................... 30.3 Micro/Nanomechanical Testing Techniques ..................................... 30.4 Biomaterial Testing Techniques ...................................................... 30.5 Discussions and Future Directions .................................................. 30.6 Further Reading ............................................................................ References ..............................................................................................
839 840 841 842 856 859 862 862
31 Experimental Methods in Biological Tissue Testing Stephen M. Belkoff, Roger C. Haut ............................................................ 31.1 General Precautions ...................................................................... 31.2 Connective Tissue Overview ............................................................ 31.3 Experimental Methods on Ligaments and Tendons.......................... 31.4 Experimental Methods in the Mechanical Testing of Articular Cartilage ...................................................................... 31.5 Bone ............................................................................................ 31.6 Skin Testing .................................................................................. References ..............................................................................................
871 871 872 873 876 878 883 884
32 Implantable Biomedical Devices
and Biologically Inspired Materials Hugh Bruck ............................................................................................. 32.1 Overview....................................................................................... 32.2 Implantable Biomedical Devices..................................................... 32.3 Biologically Inspired Materials and Systems .................................... 32.4 Conclusions ................................................................................... 32.5 Further Reading ............................................................................ References ..............................................................................................
891 892 899 909 923 924 924
33 High Rates and Impact Experiments Kaliat T. Ramesh...................................................................................... 33.1 High Strain Rate Experiments ......................................................... 33.2 Wave Propagation Experiments ...................................................... 33.3 Taylor Impact Experiments ............................................................. 33.4 Dynamic Failure Experiments ......................................................... 33.5 Further Reading ............................................................................ References ..............................................................................................
929 930 945 949 949 953 954
Contents
34 Delamination Mechanics Kenneth M. Liechti ................................................................................... 34.1 Theoretical Background ................................................................. 34.2 Delamination Phenomena ............................................................. 34.3 Conclusions ................................................................................... References ..............................................................................................
961 962 968 980 980
35 Structural Testing Applications Ashok Kumar Ghosh ................................................................................. 985 35.1 Past, Present, and Future of Structural Testing ................................ 987 35.2 Management Approach to Structural Testing ................................... 990 35.3 Case Studies .................................................................................. 997 35.4 Future Trends ................................................................................ 1012 References .............................................................................................. 1013 36 Electronic Packaging Applications Jeffrey C. Suhling, Pradeep Lall ................................................................. 36.1 Electronic Packaging...................................................................... 36.2 Experimental Mechanics in the Field of Electronic Packaging ........... 36.3 Detection of Delaminations ........................................................... 36.4 Stress Measurements in Silicon Chips and Wafers ............................ 36.5 Solder Joint Deformations and Strains ............................................ 36.6 Warpage and Flatness Measurements for Substrates, Components, and MEMS .......................................... 36.7 Transient Behavior of Electronics During Shock/Drop ....................... 36.8 Mechanical Characterization of Packaging Materials ........................ References ..............................................................................................
Acknowledgements ................................................................................... About the Authors ..................................................................................... Detailed Contents...................................................................................... Subject Index.............................................................................................
1015 1017 1019 1022 1024 1031 1036 1039 1041 1042 1045 1049 1059 1083
XXV
XXVII
List of Abbreviations
A AASHTO ABS ACES AC AFM AFNOR AISC ALT AREA ASTM
Association of State Highway Transportation Officials American Bureau of Shipping analytical, computational, and experimental solution alternating current atomic force microscopy Association Française de National American Institute of Steel Construction accelerated lift testing American Railway Engineering Association American Society for Testing and Materials
B bcc BGA BHN BIL BSI BS BrUTS
body-centered cubic ball grid array Brinell hardness number boundary, initial, and loading British Standards Institute beam-splitter bromoundecyltrichlorosilane
C CAD CAE CAM CAR CBGA CCD CCS CDC CD CGS CHS CMC CMM CMOS CMP CMTD CNC CNT COD COI CP
computer-aided design computer-aided engineering computer-aided manufacturing collision avoidance radar ceramic ball grid array charge-coupled device camera coordinate system Centers for Disease Control compact disc coherent gradient sensing coefficient of hygroscopic swelling ceramic matrix composite coordinate measuring machine complementary metal–oxide-semiconductor chemical–mechanical polishing composite materials technical division computer numerical control carbon nanotube crack opening displacement crack opening interferometry conductive polymer
CSK CSM CTE CTOD CVD CVFE CW CZM
cytoskeleton continuous stiffness module coefficient of thermal expansion crack-tip opening displacement chemical vapor deposition cohesive-volumetric finite elements continuous wave cohesive zone model
D DBS DCB DCPD DC DEC DGL DIC DIN DMA DMD DMT DNP DPH DPN DPV DRIE DR DSC DSPI DSPSI DSP DTA DTS DTS
directional beam-splitter double-cantilever beam dicyclopentadiene direct current diffraction elastic constant Devonshire–Ginzburg–Landau digital image correlation Deutsches Institut für Normung dynamical mechanical analyzers digital micromirror device Derjaguin–Muller–Toporov distance from the neutral point diamond pyramid hardness dip-pen nanolithography Doppler picture velocimetry deep reactive-ion etching deviation ratio digital speckle correlation digital speckle-pattern interferometry digital speckle-pattern shearing interferometry digital speckle photography differential thermal analyzer distributed temperature sensing dodecyltrichlorosilane
E EAP ECM ECO EDM EDP EFM EFPI EMI ENF EPFM EPL
electroactive polymer extracellular matrix poly(ethylene carbon monoxide) copolymer electric-discharge machining ethylenediamine pyrochatechol electrostatic force microscopy extrinsic Fabry–Pérot interferometer electromagnetic interference end-notched flexure elastic–plastic fracture mechanics electron-beam projection lithography
XXVIII
List of Abbreviations
ESIS ESPI ESSP ES ET EW EXAFS
European Structural Integrity Society electronic speckle pattern interferometry electrostatically stricted polymer expert system emerging technologies equivalent weight extended x-ray absorption fine structure
IEC IFM IMU IPG IPMC IP IR-GFP ISDG ISO
focal adhesion complex fine-pitch ball grid array fiber Bragg grating flip-chip ball grid array face-centered cubic flip-chip plastic ball grid array Food and Drug Administration finite element modeling finite element fast Fourier transform full field of view functionally graded material focused ion beam force modulation microscopy Fillers–Moonan–Tschoegl frequency modulation friction stir welds Fourier-transform method field of view
ISTS IT
F FAC FBGA FBG FC-BGA fcc FC-PBGA FDA FEM FE FFT FFV FGM FIB FMM FMT FM FSW FTE FoV
G GF GMR GPS GRP GUM G&R
growth factor giant magnetoresistance global positioning sensing glass-reinforced plastic Guide for the Expression of Uncertainty in Measurement growth and remodeling
H HAZ hcp HDI HEMA HFP HNDE HRR HSRPS HTS
heat-affected zone hexagonal close-packed high-density interconnect 2-hydroxyethyl methacrylate half-fringe photoelasticity holographic nondestructive evaluation Hutchinson–Rice–Rosengreen high strain rate pressure shear high-temperature storage
I IBC IC
International Building Code integrated circuits
ion exchange capacity interfacial force microscope inertial measurement unit ionic polymer gel ionomeric polymer–metal composite image processing infrared grey-field polariscope interferometric strain/displacement gage International Organization for Standardization impulsive stimulated thermal scattering interferometer
J JIS
Japanese Industrial Standards
L LAN LASIK LCE LDV LED LEFM LFM LIGA LMO LORD LPCVD LPG LVDT LVDT
local area network laser-based corneal reshaping liquid crystal elastomer laser Doppler vibrometry light-emitting diode linear elastic fracture mechanics lateral-force AFM lithography galvanoforming molding long-working-distance microscope laser occlusive radius detector low-pressure CVD long-period grating linear variable differential transformer linear variable displacement transducer
M MBS MEMS MFM micro-CAT MITI MLF MMC MOEMS MOSFET MO M-TIR μPIV MPB MPCS MPODM MW(C)NT
model-based simulation micro-electromechanical system magnetic force microscopy micro computerized axial tomography Ministry of International Trade and Industry metal leadframe package metal matrix composites microoptoelectromechanical systems metal-oxide semiconductor field-effect transistor microscope objective modified total internal reflection microparticle image velocimetry morphotropic phase boundary most probable characteristics strength multipoint overdeterministic method multiwalled (carbon) nanotubes
List of Abbreviations
N NA NC-AFM NCOD NC NDE NDT/NDE NEMS NEPA NHDP NIST NMR NSF NSOM NVI
numerical aperture noncontact AFM normal crack opening displacement nanocrystalline nondestructive evaluation nondestructive testing/evaluation nanoelectromechanical system National Environmental Policy Act The National Highways Development Project National Institute of Standard and Technology nuclear magnetic resonance National Science Foundation near-field scanning optical microscopy normal velocity interferometer
OFDR OIML OIM OMC ONDT OPD OPS OSHA
optical/digital fringe multiplication object coordinate system orientation distribution function optoelectronic holography optoelectronic laser interferometric microscope optical frequency-domain reflectometry Organisation Internationale de Metrologie Legale orientation imaging microscopy organic matrix composites optical nondestructive testing optical path difference operations per second Occupational Safety and Health Administration
P PBG PBS PCB PCF PDMS PECVD PE PID PIN PIV PLA PLD PLZT PL PM fiber PMC
photonic-bandgap phosphate-buffered saline printed circuit board photonic-crystal fiber polydimethylsiloxane plasma-enhanced CVD pulse-echo proportional-integral-derivative p-type intrinsic n-type particle image velocimetry polylactic acid path length difference Pb(La,Zr,Ti)O3 path length polarization maintaining fiber polymer matrix composites
phase-measurement interferometry polymethyl methacrylate Pb(Mgx Nb1−x )O3 polarization maintaining power meter plastic quad flat package photorefractive crystal point spread function phase shifting technique plated-through holes polyvinyl chloride polyvinylidene fluoride physical vapor deposition phase velocity scanning Pb(Zr,Ti)O3
Q QC QFP QLV
O O/DFM OCS ODF OEH OELIM
PMI PMMA PMN PM PM PQFP PRC PSF PST PTH PVC PVDF PVD PVS PZT
quality-control quad flat pack quasilinear viscoelastic theory
R RCC RCRA RF RIBS RMS RPT RSG RSM RS RVE R&D
reinforced cement concrete Resource Conservation and Recovery Act radiofrequency replamineform inspired bone structures root-mean-square regularized phase tracking resistance strain gage residual stress management residual stress representative volume element research and development
S S-T-C S/N SAC SAM SAM SAR SAW SCF SCS SC SDF SD SEM SEM SHPB SIF SI SLC
self-temperature compensation signal to noise Sn–Ag–Cu scanning acoustic microscopy self-assembled monolayer synthetic-aperture radar surface acoustic wave stress concentration factor sensor coordinate system speckle correlation structure data files standard deviation scanning electron microscopy Society for Experimental Mechanics split-Hopkinson pressure bar stress intensity factor speckle interferometry surface laminar circuit
XXIX
XXX
List of Abbreviations
SLL SMA SNL SNR SOI SOTA SPATE SPB SPM SPSI SPS SP SQUID SRM SSM STC STM SThM ST SW(C)NT
surface laminar layer shape-memory alloy Sandia National Laboratories signal-to-noise ratio silicon on insulator state-of-the-art stress pattern analysis by thermal emissions space–bandwidth product scanning probe microscope speckle pattern shearing interferometry spatial phase shifting speckle photography superconducting quantum interface device sensitivity response method sacrificial surface micromachining self-temperature compensated scanning tunneling microscope scanning thermal microscopy structural test single-walled (carbon) nanotubes
TIG TIM TIR TMAH TM TPS TSA TS TWSME Terfenol-D TrFE
thermal barrier coatings temperature coefficient of expansion temperature coefficient of resistance transverse displacement interferometer time division multiplexing thermoelectric cooler transmission electron microscopy thermal evaluation for residual stress analysis tetrafluoroethylene
VLE
T TBC TCE TCR TDI TDM TEC TEM TERSA TFE
tungsten inert gas thermal interface materials total internal reflection tetramethylammonium hydroxide thermomechanical temporal phase shifting thermoelastic stress analysis through scan two-way shape memory effect Tb0.3 Dy0.7 Fe2 trifluoroethylene
U UCC UDL UHV ULE UP
ultrasonic computerized complex uniformly distributed load ultrahigh vacuum ultralow expansion ultrasonic peening
V VCCT VDA VISAR
virtual crack closure technique video dimension analysis velocity interferometer system for any reflector vector loop equations
W WCS WDM WFT WLF WM WTC
world coordinate system wavelength-domain multiplexing windowed Fourier transform Williams–Landel–Ferry wavelength meter World Trade Center
1
Part A
Solid Mec Part A Solid Mechanics Topics
1 Analytical Mechanics of Solids Albert S. Kobayashi, Seattle, USA Satya N. Atluri, Irvine, USA 2 Materials Science for the Experimental Mechanist Craig S. Hartley, Sedona, USA 3 Mechanics of Polymers: Viscoelasticity Wolfgang G. Knauss, Pasadena, USA Igor Emri, Lubljana, Slovenia Hongbing Lu, Stillwater, USA 4 Composite Materials Peter G. Ifju, Gainesville, USA 5 Fracture Mechanics Krishnaswamy Ravi-Chandar, Austin, USA 6 Active Materials Guruswami Ravichandran, Pasadena, USA
7 Biological Soft Tissues Jay D. Humphrey, College Station, USA 8 Electrochemomechanics of Ionic Polymer–Metal Composites Sia Nemat-Nasser, La Jolla, USA 9 A Brief Introduction to MEMS and NEMS Wendy C. Crone, Madison, USA 10 Hybrid Methods James F. Doyle, West Lafayette, USA 11 Statistical Analysis of Experimental Data James W. Dally, Knoxville, USA
3
Albert S. Kobayashi, Satya N. Atluri
In this chapter we consider certain useful fundamental topics from the vast panorama of the analytical mechanics of solids, which, by itself, has been the subject of several handbooks. The specific topics that are briefly summarized include: elementary theories of material response such as elasticity, dynamic elasticity, viscoelasticity, plasticity, viscoplasticity, and creep; and some useful analytical results for boundary value problems in elasticity.
1.1
Elementary Theories of Material Responses ........................... 1.1.1 Elasticity ..................................... 1.1.2 Viscoelasticity ..............................
1.1.3 Plasticity ..................................... 1.1.4 Viscoplasticity and Creep ...............
7 9
Boundary Value Problems in Elasticity .... 1.2.1 Basic Field Equations .................... 1.2.2 Plane Theory of Elasticity............... 1.2.3 Basic Field Equations for the State of Plane Strain ............................. 1.2.4 Basic Field Equations for the State of Plane Stress ............................. 1.2.5 Infinite Plate with a Circular Hole... 1.2.6 Point Load on a Semi-Infinite Plate
11 11 12
Summary .............................................
14
References ..................................................
14
1.2
4 4 6
1.3
12 12 13 13
Herein, we employ Cartesian coordinates exclusively. We use a fixed Cartesian system with base vectors ei (i = 1, 2, 3). The coordinates of a material particle before and after deformation are xi and yi , respectively. The deformation gradient, denoted as Fij , is defined to be ∂yi ≡ yi, j . (1.1) ∂x j
A wide variety of other strain measures may be derived [1.1–4]. Let ( da) be a differential area in the deformed body, and let n i be direction cosines of a unit outward normal to ( da). If the differential force acting on this area is d f i , the true stress or Cauchy stress τij is defined from the relation
The displacement components will be denoted by u i (= yi − xi ), such that
Thus τij is the stress per unit area in the deformed body. The nominal stress (or the transpose of the so-called first Piola–Kirchhoff stress) tij and the second Piola– Kirchhoff stress Sij are defined through the relations
Fij = δij + u i, j ,
(1.2)
where δij is a Kronecker delta. The Green–Lagrange strain tensor εij is given by 1 1 εij = (Fki Fk j − δij ) ≡ (u i, j + u j,i + u k,i u k, j ) . 2 2 (1.3)
When displacements and their gradients are infinitesimal, (1.3) may be approximated as 1 (1.4) εij = (u i, j + u j,i ) ≡ u (i, j) . 2
d f i = ( da)n j τij .
d f i = ( da)N j t ji = ( dA)N j S jk yi,k ,
(1.5)
(1.6) (1.7)
where ( dA)N j is the image in the undeformed configuration, of the oriented vector area ( da)n j in the deformed configuration. Note that both t ji and S ji are stresses per unit area in the undeformed configuration, and t ji is unsymmetric, while S ji is, by definition, symmetric [1.3,4]. It should also be noted that a wide variety of other stress measures may be derived [1.3, 4].
Part A 1
Analytical Me 1. Analytical Mechanics of Solids
4
Part A
Solid Mechanics Topics
Part A 1.1
From the geometric theory of deformation [1.5], it follows that ∂xi (1.8) , ( da)n j = (J)( dA)Nk ∂y j where ρ0 dv (1.9) = . J= d∀ ρ In the above dv is a differential volume in the deformed body, and d∀ is its image in the undeformed body. From (1.5) through (1.9), it follows that ∂x j ∂xi ∂xi τm j and Sij = J τmn . (1.10) tij = J ∂ym ∂ym ∂yn
Another useful stress tensor is the so-called Kirchhoff stress tensor, denoted by σij and defined as σij = Jτij .
(1.11)
When displacements and their gradients are infinitesimal, J ≈ 1, ∂xi /∂yk = δik and so on, and thus the distinction between all the stress measures largely disappears. Hence, in an infinitesimal deformation theory, one may speak of the stress tensor σij . For more on finite deformation mechanism of solids see [1.6, 7].
1.1 Elementary Theories of Material Responses The mathematical characterization of the behavior of solids is one of the most complex aspects of solid mechanics. Most of the time, the general behavior of a material defies our mathematical ability to characterize it. The theories discussed below must be viewed simply as idealizations of regimes of material response under specific types of loading and/or environmental conditions.
invariants of εij . These invariants may be defined as
1.1.1 Elasticity
where eijk is equal to 1 if (ijk) take on values 1, 2, 3 in a cyclic order, and equal to −1 if in anticyclic order, and is zero if two of the indices take on identical values. Sometimes, invariants J1 , J2 , and J3 , defined as
In this idealization, the underlying assumption is that stress is a single-valued function of strain and is independent of the history of straining. Also, for such materials, one may define a potential for stress in terms of strain, in the form of a strain-energy density function, denoted here by W. It is customary [1.4] to measure W per unit of the undeformed volume. In the general case of finite deformations, different stress measures are related to the derivative of W with respect to specific strain measures, labeled as conjugate strain measures, i. e., strains conjugate to the appropriate form of stress. Thus it may be shown [1.3] that tij =
∂W , ∂F ji
Sij =
∂W . ∂εij
(1.12)
Note that, for finite deformations, the Cauchy stress τij does not have a simple conjugate strain measure. When W does not depend on the location of the material particle (in the undeformed conjugation), the material is said to be homogeneous. A material is said to be isotropic if W depends on εij only through the basic
I1 = 3 + 2εkk , I2 = 3 + 4εkk + 2(εkk εmm − εkm εkm ) , and I3 = det|δmn + 2εmn | ≡ 1 + 2εkk + 2(εkk εmm − εkm εkm ) ,
J1 = (I1 − 3), J2 = (I2 − 2I1 + 3) , J3 = (I3 − I2 + I1 − 1)
(1.13)
(1.14)
are also used. When the material is isotropic, the Kirchhoff stress tensor may be shown to be the derivative of W with respect to a certain logarithmic strain measure [1.4]. Also, by decomposing the deformation gradient Fij into pure stretch and rigid rotation [1.4, 8], one may derive certain other useful stress measures, such as the Biot–Lure stress, Jaumann stress, and so on [1.4]. An isotropic nonlinearly elastic material may be characterized, in its behavior at finite deformations, by W=
∞
Crst (I1 − 3)r (I2 − 3)s (I3 − 1)t ,
r,s,t=0
C000 = 0 .
(1.15)
The ratio of volume change due to deformation, dv/ d∀, is given, for finite deformations, by I3 . Thus, for
Analytical Mechanics of Solids
¯ = W(εij ) + p(I3 − 1) , W
(1.16)
that is, tij =
∂W ∂I3 +p , ∂F ji ∂F ji
Sij =
∂W ∂I3 +p . (1.17) ∂εij ∂εij
For isotropic, incompressible, elastic materials, W(εij ) = W(I1 , I2 ) .
(1.18)
Thus (1.17) and (1.18) yield, for instance, ∂W ∂W δij + 4[δij (1 + εmm ) − δim δ jn εmn ] ∂I1 ∂I2 + p[δij (1 + 2εmm ) − 2δim δ jn εmn + 2eimn e jrs εmr εns ] . (1.19)
Sij = 2
A well-known representation of (1.18) is due to Mooney [1.8], where W(I1 , I2 ) = C1 (I1 − 3) + C2 (I2 − 3) .
(1.20)
So far, we have discussed isotropic materials. In general, for a homogeneous solid, one may write W = E ij εij + 12 E ijmn εij εmn + 13 E ijmnrs εij εmn εrs + · · · .
(1.21)
We use, for convenience of presentation, Sij and εij as conjugate measures of stress and strain. Since Sij and εij are both symmetric, one must have E ij = E ji , E ijmn = E jinm = E ijnm = E mnij , E ijmnrs = E jimnrs = E ijnmrs = E ijmnsr = · · · = Ersijmn = · · · . (1.22) Thus Sij = E ij + E ijmn εmn + E ijmnrs εmn εrs + · · · . (1.23) Henceforth, we will consider the case when deformations are infinitesimal. Thus εij ≈ (1/2)(u i, j + u j,i ). Further, the differences in the definitions of various stress measures disappear, and one may speak of the stress σij . Thus (1.23) may be rewritten as σij = E ij + E ijmn εmn + E ijmnrs εmn εrs + · · · . (1.24)
A material is said to be linearly elastic if a linear approximation of (1.24) is valid for the magnitude of strains under consideration. For such a material, σij = E ij + E ijmn εmn .
(1.25)
The stress at zero strain (i. e., E ij ) most commonly is due to temperature variation from a reference state. The simplest assumption in thermal problems is to set E ij = −βij ΔT where ΔT [= (T − T0 )] is the temperature increment from the reference value T0 . For an anisotropic linearly elastic solid, in view of the symmetries in (1.23), one has 21 independent elastic constants E ijkl and six constants βij . In the case of isotropic linearly elastic materials, an examination of (1.13) through (1.15) reveals that the number of independent elastic constants E ijkl is reduced to two, and the number of independent βs to one. Thus, for an isotropic elastic material, σij = λεkk δij + 2μεij − βΔT δij ,
(1.26a)
where λ and μ are Lamé parameters, which are related to the Young’s modulus E and the Poisson’s ratio ν through E Eν , μ= . λ= (1 + ν)(1 − 2ν) 2(1 + ν) The bulk modulus K is defined as 3λ + 2μ . K= 3 The inverse of (1.26a) is ν 1+ν (1.26b) σij + αΔT δij , εij = − σmn δij + E E where β and α are related through Eα β= (1.26c) 1 − 2ν and α is the linear coefficient of thermal expansion. The state of plane strain is characterized by the conditions that u r = u r (X s ), r, s = 1, 2, and u 3 = 0. Thus ε3i = 0, i = 1, 2, 3. In plane strain, 1 − ν2 ν σ22 + α(1 + ν)ΔT , σ11 − ε11 = E 1−ν (1.27a)
1 − ν2 ν ε22 = σ22 − σ11 + α(1 + ν)ΔT , E 1−ν
(1.27b)
1+ν σ12 , E σ33 = ν(σ11 + σ) − αEΔT . ε12 =
(1.27c) (1.27d)
5
Part A 1.1
incompressible materials, I3 = 1. For incompressible materials, stress is determined from strain only to within a scalar quantity (function of material coordinates) called the hydrostatic pressure. For such materials, one ¯ in may define a modified strain-energy function, say W, which the incompressibility condition, I3 = 1, is introduced as a constraint through the Lagrange multiplier p. Thus
1.1 Elementary Theories of Material Responses
6
Part A
Solid Mechanics Topics
Part A 1.1
The state of plane stress is characterized by the conditions that σ3k = 0, k = 1, 2, 3. Here one has 1 (1.28a) ε11 = (σ11 − νσ22 ) + αΔT , E 1 ε22 = (σ22 − νσ11 ) + αΔT , (1.28b) E 1+ν ε12 = (1.28c) σ12 , E ν ε33 = − (σ11 + σ22 ) + αΔT . (1.28d) E Note that in (1.27c) and (1.28c), ε12 is the tensor component of strain. Sometimes it is customary to use the engineering strain component γ12 = 2ε12 . Note also that, in the case of a linearly elastic material, the strainenergy density W is given by W= =
σij (t) = εkl (0+ )E ijkl +
t E ijkl (t − τ) 0
∂εkl dτ ∂τ (1.33a)
= E kl (0+ )εijkl +
t εijkl (t − τ) 0
∂E kl dτ . ∂τ (1.33b)
1 2 σij εij 1 2 (σ11 ε11 + σ22 ε22 + σ33 ε33
In the above, it has been assumed that σkl = εkl = 0 for t < 0 and that εij (t) and E ij (t) are piecewise continuous. E ijkl (t) is called the relaxation tensor for an anisotropic material. Conversely, one may write
+ 2ε12 σ12 + 2ε13 σ13 + 2ε23 σ23 ) ≡ 12 (σ11 ε11 + σ22 ε22 + σ33 ε33 + γ12 σ12 + γ23 σ23 + γ13 σ13 ) .
(1.29)
From (1.26b) it is seen that, for linearly elastic isotropic materials, 1 − 2ν σmm σmm + 3αΔT ≡ + 3αΔT . (1.30) εkk = E 3k When the bulk modulus k → ∞ (or ν → 12 ), it is seen that εkk → 3αΔT and is independent of the mean stress. Note also from (1.26c) that β → ∞ as ν → 12 . For such materials, the mean stress is indeterminate from deformation alone. In this case, the relation (1.26a) is replaced by σij = −ρδij + 2μεij
(1.31a)
with the constraint εkk = 3αΔT ,
(1.31b)
εij
where ρ is the hydrostatic pressure and is the deviator of the strain. Note that the strain-energy density of a linearly elastic incompressible material is W = μεij εij − p(εkk − 3αΔT ) ,
materials are those for which the current deformation is a function of the entire history of loading, and conversely, the current stress is a function of the entire history of straining. Linearly viscoelastic materials are those for which the hereditary relations are expressed in terms of linear superposition integrals, which, for infinitesimal strains, take the forms
(1.32)
wherein p acts as a Lagrange multiplier to enforce (1.31b).
1.1.2 Viscoelasticity A linearly elastic solid, by definition, is one that has the memory of only its unstrained state. Viscoelastic
+
t
εij (t) = σkl (0 )Cijkl +
Cijkl (t − τ) 0
∂σkl dτ , ∂τ (1.34)
where Cijkl (t) is called the creep compliance tensor. For isotropic linearly viscoelastic materials, E ijkl = μ(t)(δik δ jl + δlk δ jk ) + λ(t)δij δkl ,
(1.35)
where μ(t) is the shear relaxation modulus and B(t) ≡ [3α(t) + 2μ(t)]/3 is the bulk relaxation modulus. It is often assumed that B(t) is a constant; so that the material is assumed to have purely elastic volumetric change. In viscoelasticity, a Poisson function corresponding to the strain ratio in elasticity does not exists. However, for every deformation history there is computable Poisson contraction or expansion behavior. For instance, in a uniaxial tension test, let the stress be σ11 , the longitudinal strain ε11 , and the lateral strain ε22 . For creep at constant stress, the ratio of lateral contraction, denoted by νc (t), is νc (t) = −ε22 (t)/ε11 (t). On the other hand, under relaxation at constant strain, ε11 , the lateral contraction ratio is ν R (t) = −ε22 (t)/ε11 . It is often convenient, though not physically correct, to assume that Poisson’s ratio is a constant, which renders B(t) proportional to μ(t). A constant bulk modulus provides a much better and simple approximation for the material behavior than a constant Poisson’s ratio when properties over the whole time range are needed.
Analytical Mechanics of Solids
σ ij ( p) = pE ijkl ( p)εkl ( p)
(1.36a)
εij ( p) = pC ijkl ( p)σ kl ( p) ,
(1.36b)
and
deformation is assumed to be insensitive to hydrostatic pressure, the yield function is assumed, in general, to depend on the stress deviator, σij = σij − 13 σmm δij . The commonly used yield functions are von Mises
where (·) is the Laplace transform of (·) and p is the Laplace variable. From (1.36a) and (1.36b), it follows that p E ijkl C klmn = δim δn j . 2
M
μm exp(−μm t) ,
m=1 M
B(t) = B0 +
Bm exp(−βm t) .
m=1
1.1.3 Plasticity Most structural metals behave elastically for only very small values of strain, after which the materials yield. During yielding, the apparent instantaneous tangent modulus of the material is reduced from those in the prior elastic state. Removal of load causes the material to unload elastically with the initial elastic modulus. Such materials are usually labeled as elastic–plastic. Observed phenomena in the behavior of such materials include the so-called Bauschinger effect (a specimen initially loaded in tension often yields at a much reduced stress when reloaded in compression), cyclic hardening, and so on [1.9, 10]. (When a specimen a specimen is subjected to cyclic straining of amplitude −ε to +ε, the stress for the same value of tensile strain ε, prior to unloading, increases monotonically with the number of cycles and eventually saturates.) Various levels of sophistication of elastic-plastic constitutive theories are necessary to incorporate some or all of these observed phenomena. Here we give a rather cursory review of this still burgeoning literature. In most theories of metal plasticity, it is assumed that plastic deformations are entirely distortional in nature, and that volumetric strain is purely elastic. The elastic limit of the material is assumed to be specified by a yield function, which is a function of stress (or of strain, but most commonly of stress). Since plastic
J2 = 12 σij σij ,
(1.38)
Tresca f (σij ) = (σ1 − σ2 )2 − 4k2 (σ2 − σ3 )2 − 4k2 (1.39) × (σ1 − σ3 )2 − 4k2 = 0 .
(1.37)
It is also customary to represent the relaxation moduli, μ(t) and B(t), in series form, as μ(t) = μ0 +
f (σij ) = J2 − k2 ,
In (1.38) and (1.39), k may be a function of the plastic strain. Both (1.38) and (1.39) represent a surface, which is defined as the yield surface, in the stress space. The two equations also imply the equality of the tensile and compressive yield stresses at all times – so-called isotropic hardening. The yield surface expands while its center remains fixed in the stress space.√ The relation of k to test data follows: in (1.38), k = σ¯ / 3, where σ¯ is the yield stress in uniaxial tension, which may be a function of plas√ tic strain for strain-hardening materials, or k = τ¯ / 2, where τ¯ is the yield stress in pure shear; or in (1.39), k = σ¯ /2 or τ¯ . Experimental data appear to favor the use of the Mises condition [1.11, 12]. To account for the Bauschinger effect, one may use the representation of the yield surface f (σij − αij ) = 0 = 12 σij − αij σij − αij − 13 σ¯ 2 =0,
(1.40)
αij
where represents the center of the yield surface in the deviatoric stress space. The evolution equations suggested for αij by Prager [1.13] and Ziegler [1.14], respectively, are that the incremental dαij is proporp tional to the incremental plastic strain dεij or dαij = c dεij
(1.41)
dαij = dμ(σij − αij ) .
(1.42)
p
and
(·)
In the above, denotes the deviatoric part of the second-order tensor (·) where an additive decomposition of differential strain into elastic and plastic parts p (i. e., dεij = dεije + dεij ) was used. Elastic processes (with no increase in plastic strain) and plastic processes (with increase in plastic strain) are defined [1.12] as
7
Part A 1.1
The Laplace transforms of (1.33) and (1.34) may be written as
1.1 Elementary Theories of Material Responses
8
Part A
Solid Mechanics Topics
Part A 1.1
elastic process: f < 0 or
f = 0 and
∂f dσij ≤ 0 , ∂σij
(1.43)
plastic process: ∂f dσij > 0 . (1.44) ∂σij The flow rule for strain-hardening materials, arising out of consideration of stress working in a cyclic process and stability of the process, often referred to as Drucker’s postulates [1.15], is given by f = 0 and
p dεij
∂f = dλ . ∂σij
(1.45)
The scalar dλ is determined from the fact that d f = 0 during a plastic process, the so-called consistency condition. Using the isotropic-hardening (J2 flow) theory for which f is given in (1.38), this consistency condition leads to 9 σ dσmn p (1.46) dεij = σij mn 2 , 4 H σ¯ where H is the slope of the curve of stress versus plastic strain in uniaxial tension (or, more correctly, the slope of the curve of true stress versus logarithmic strain in pure tension). On the other hand, for Prager’s linearly kinematic hardening rules, given in (1.40) and (1.41), the consistency condition leads to 3 p σmn − αmn dσmn σij − αij . (1.47) dεij = 2cσ¯ 2 For pressure-insensitive plasticity, the stress–strain laws may be written as dσmn = (3λ + 2μ) dεmn , p dσij = 2μ dεij − dεij .
(1.48a) (1.48b) p
Choosing a parameter ζ such that ζ = 1 when dεij = 0 p and α = 0 when dεij = 0, we have dσ 9 σmn mn dσij = 2μ dεij − σij α (1.49) 4 H σ¯ 2 for isotropic hardening, and
3 dσij = 2μ dεij − (σ − αmn ) 2cσ¯ 2 mn × dσmn (σij − αij )α
(1.50)
for Prager’s linearly kinematic hardening. Taking the tensor product of both sides of (1.49) with σij (and
dσ noting that σmn dσmn = σmn mn by definition), we have 3α σ dσ (1.51a) dσij σij = 2μ dεij σij − 2H mn mn or 2μH dσij σij = dε σ , when α = 1 . (1.51b) H + 3μ ij ij Use of (1.51b) in (1.49) results in
9α dσij = 2μ dεij − 2μ σ σ dε . 4(H + 3μ)σ¯ 2 ij mn mn
(1.52)
Combining (1.48a) and (1.52), one may write the isotropic-hardening elastic-plastic constitutive law in differential form as dσij = 2μδim δ jn + λδij δmn 9αμ − 2μ σ σ (1.53) dεmn , (2H + 6μ)σ¯ 2 ij mn dε ≡ σ dε wherein σmn mn has been noted. Simimn mn larly, by taking the tensor product of (1.50) with (σij − αij ) and repeating steps analogous to those in (1.51) through (1.53), one may write the kinematic-hardening elastoplastic constitutive law as
3μ dσij = 2δim δ jn + λδij δmn − 2μ (c + 2μ)σ¯ 2 × (σij − αij )(σmn − αmn ) dεmn . (1.54) Note that all the developments above are restricted to the infinitesimal strain and small-deformation case. Discussion of finite-deformation plasticity is beyond the scope of this summary. (Even in small deformation plasticity, if the current tangent modulus of the stress–strain relation are of the same order of magnitude as the current stress, one must use an objective stress rate, instead of the material rate dσij , in (1.54).) Here the objectivity of the stress–strain relation plays an important role. We refer the reader to [1.4, 16, 17]. We now briefly examine the elastic-plastic stress– strain relations in the isotropic-hardening case, for plane strain and plane stress, leaving it to the reader to derive similar relations for kinematic hardening. In the planestrain case, dε3n = 0, n = 1, 2, 3. Using this in (1.53), we have
dσαβ = 2μδαθ δβν + λδαβ δθν 9αμ − 2μ σ σ (1.55) dεθν (2H + 6μ)σ¯ 2 αβ θυ
Analytical Mechanics of Solids
dσ33 = λ dεθθ − 2μ
9αμ σ σ dεϑν , (2H + 6μ)σ¯ 2 33 θυ
α, β, θ, ν = 1, 2 . (1.56) Note that, in the plane-strain case, σ33 , as integrated from (1.56), enters the yield condition. In the planestress case the stress–strain relation is somewhat tedious to derive. Noting that in the plane-stress case, dεαβ = dεeαβ + p dεαβ one may, using the elastic strain–stress relations as given in (1.33), write p
dεαβ = dεeαβ + dεαβ
1 ν p = dσαβ − dσθθ δαβ + dεαβ (1.57) 2μ 1+ν
1 ν dσαβ − = dσθθ δαβ 2μ 1+ν 9 , (1.58) + σαβ (σθυ dσθυ ) 4H σ¯ 2 wherein (1.16) has been used. Equation (1.58) may be inverted to obtain dσαβ in terms of dεθν . This 3 × 3 matrix inversion may be carried out, leading to the result [1.18] 2 Q ) + 2P dε11 dσ11 = (σ22 E + (−σ11 σ22 + 2ν P) dε22 σ11 + νσ22 − 2 dε12 , σ12 1+ν Q σ22 + 2ν P) dε11 dσ22 = (−σ11 E 2 + (σ11 ) + 2P dε22 σ + σ11 2 − 22 dε12 , σ12 1+ν σ11 + νσ22 Q dσ12 = − σ12 dε11 E 1+ν σ + νσ11 − 22 σ12 dε22
1+ν R 2H + + (1 − ν)σ¯ dε12 , 2(1 + ν) 9E where σ2 2H 2 P= σ¯ + 12 , Q = R + 2(1 − ν2 )P , 9H 1+ν (1.59)
and 2 + 2νσ11 σ22 + σ22 2. R = σ11
(1.60)
As noted earlier, the classical plasticity theory has several limitations. Intense research is underway to im-
prove constitutive modeling in cyclic plasticity, and so on, some notable avenues of current research being multisurface plasticity model, endochronic theories, and related internal variable theories (see, e.g., [1.19–21]).
1.1.4 Viscoplasticity and Creep A viscoplastic solid is similar to a viscous fluid, except that the former can resist shear stress even in a rest configuration; but when the stresses reach critical values as specified by a yield function, the material flows. Consider, for instance, the loading case of simple shear with the only applied stress being σ12 . Restricting ourselves to infinitesimal deformations and strains, let the shearstrain rate be ε˙ 12 = ( dε12 / dt). Then ε˙ 12 = 0 until the magnitude of σ12 reaches a value k, called the yield stress. When |σ12 | > k, ε˙ 12 , by definition for a simple viscoplastic material, is proportional to |σ12 | − k and has the same sign as σ12 . Thus, defining a function F 1 for this one-dimensional problem as |σ12 | (1.61) −1 , k the viscoplastic property may be characterized by the equation F1 =
2η˙ε12 = k(F 1 )σ12 , where
(1.62)
F1
must have the property ⎧ ⎨0 if F 1 < 0 , F 1 = ⎩ F 1 if F 1 ≥ 0 ,
(1.63)
and where η is the coefficient of viscosity. The above relation for simple shear is due to Bing2 for simple shear, ham [1.22]. Recognizing that J = σ12 a generalization of the above for three-dimensional case was given by Hohenemser and Prager [1.23] as νp
η˙εij = 2k
F 1
∂F , ∂σij
(1.64a)
where
1/2 1/2 σij σij /2 J2 F= −1 = −1 , k k
(1.64b)
and the specific function F is defined similar to F 1 of (1.63). For an elasto-viscoplastic solid undergoing infinitesimal straining, one may use the additive decomposition p
ε˙ ij = ε˙ ije + ε˙ ij
(1.65)
9
Part A 1.1
and
1.1 Elementary Theories of Material Responses
10
Part A
Solid Mechanics Topics
Part A 1.1
and the stress–strain rate relation ν p σ˙ ij = E ijkl ε˙ kl − ε˙ kl ,
(1.66)
where E ijkl are the instantaneous elastic moduli. Note that the viscoplastic strains in (1.64a) are purely deviatoric, since ∂F/∂σij = σij /2 is deviatoric. Thus, for an isotropic solid, (1.66) may be written as σ˙ mn = (3λ + 2μ) ε˙ mn and
σ˙ ij = 2μ ε˙ ij − ε˙ ij .
(1.68)
(1.69a)
(1.69b)
The expression (1.69a) is often referred to as time hardening and (1.69b) as strain hardening. In as much as (1.68), (1.69a), and (1.69b), are valid for constant stress, (1.69a) and (1.69b), when integrated for variable stress histories, do not necessarily give the same results. Usually, strain hardening leads to better agreement with experimental findings for variable stresses. In the study of creep at a given temperature and for long times, called steady-state creep, the creep strain rate in uniaxial loading is usually expressed as ε˙ c = f (σ, T ) ,
(1.70)
where T is the temperature. Assuming that the effects of σ and T are separable, the relation ε˙ c = f 1 (σ) f 2 (T ) = Aσ n f 2 (T ) = Bσ n
3 σ σ 2 ij ij
and ε˙ ceq =
2 ε˙ ij ε˙ ij 3
1/2 (1.73)
(1.67b)
or, equivalently, ε˙ c = g(σ, εc ) .
(1.72)
where the subscript “eq” denotes an “equivalent” quantity, defined, analogous to the case of plasticity, as σ˙ eq =
where σ is the uniaxial stress and t is the time. The creep rate may be written as ε˙ c = f (σ, t) ,
n , ε˙ ceq = Bσeq
(1.67a)
On the other hand, for metals operating at elevated temperatures, the strain in uniaxial tension is known to be a function of time, for a constant stress of magnitude even below the conventional elastic limit. Most often, based on extensive experimental data [1.24], the creep strain under constant stress, in uniaxial tests, is expressed as ε˙ c = Aσ n t m ,
involve no volume change. Thus, in the multiaxial case, ε˙ ijc is a deviatoric tensor. The relation (1.71) may be generalized to the multiaxial case as
(1.71a) (1.71b)
is usually employed, with B denoting a function of the temperature. The steady-state creep strains are associated largely with plastic deformations and are usually observed to
such that σeq ε˙ ceq = σij ε˙ ijc . Thus (1.72) implies that ε˙ ijc =
3 B(σeq )n−1 σij . 2
(1.74)
For the elastic-creeping solid, one may again write ε˙ ij = ε˙ ije + ε˙ ijc
(1.75)
and once again, the stress–strain rate relation may be written as (1.76) σ˙ ij = E ijkl ε˙ kl − ε˙ ckl . In the above, the applied stress level has been assumed to be such that the material remains within the elastic limit. If the applied loads are of such a magnitude as to cause the material to exceed its yield limit, one must account for plastic or viscoplastic strains. An interesting unified viscoplastic/plastic/creep constitutive law has been proposed by Perzyna [1.25]. Under multiaxial conditions, the relation for inelastic strain rate suggested in [1.26] is ε˙ ija = Aψ( f )
∂q , ∂σij
(1.77)
where A is the fluidity parameter, the superscript “a” denotes an elastic strain rate, and f is a loading function, expressed, analogous to the plasticity case, as f (σij , k) = ϕ(σij ) − k = 0 ,
(1.78)
q is a viscoplastic potential defined as q = q(σij ) , and ψ( f ) is a specific function such that ⎧ ⎨0 if f < 0 ψ( f ) = ⎩ψ( f ) if f ≥ 0 .
(1.79)
(1.80)
Analytical Mechanics of Solids
ψ( f ) = f n and
f =
3 σ σ 2 ij ij
(1.81a)
1/2 − σ¯ = σeq − σ¯ .
(1.81b)
By letting σ¯ = 0 and q = f , one may easily verify that ε˙ ija of (1.77) tends to the creep strain rate ε˙ ijc of (1.74). Letting σ¯ be a specified constant value and q = f , we obtain, using (1.81b) in (1.77), that ε˙ ija =
σij 3 A(σeq − σ¯ )n 2 σeq
for f > 0 (i. e., σeq > σ¯ ) .
(1.82)
The equivalent inelastic strain may be written as 2 a a 1/2 = A(σeq − σ¯ )n (1.83a) ε˙ ij ε˙ ij ε˙ aeq = 3 or 1 a 1/2 . (1.83b) ε˙ eq σeq − σ¯ = A Thus, if a stationary solution of the present inelastic model (i. e., when ε˙ aeq → 0) is obtained, it
is seen that σeq → σ. ¯ Thus a classical inviscid plasticity solution is obtained. This fact has been utilized in obtaining classical rate-independent plasticity solutions from the general model of (1.77), by Zienkiewicz and Corneau [1.26]. An alternative way of obtaining an inviscid plastic solution from Perzyna’s model is to let A → ∞. This concept has been implemented numerically by Argyris and Kleiber [1.27]. Also, as seen from (1.83b), σeq or equivalently the size of the yield surface is governed by isotropic work-hardening effects as characterized by the dependence on viscoplastic work, and the strain-rate effect as q characterized by the term (˙εeq )1/n . Thus rate-sensitive plastic problems may also be treated by Perzyna’s model [1.25]. Thus, by appropriate modifications, the general relation (1.77) may be used to model creep, rate-sensitive plasticity, and rate-insensitive plasticity. By a linear combination of strain rates resulting from these individual types of behavior, combined creep, plasticity, and viscoplasticity may be modeled. However, such a model is more or less formalistic and does not lead to any physical insights into the problem of interactive effects between creep, plasticity, and viscoplasticity. Modeling of such interactions is the subject of a large number of current research studies.
1.2 Boundary Value Problems in Elasticity 1.2.1 Basic Field Equations When deformations are finite and the material is nonlinear, the field equations governing the motion of a solid may become quite complicated. When the constitutive equation is of a differential form, such as in plasticity, viscoplasticity, and so on, it is often convenient to express the field equations in rate form as well. On the other hand, when stress is a single-valued function of strain as in nonlinear elasticity, the field equations may be written in a total form. In general, when numerical procedures are employed to solve boundary/initial value problems for arbitrary-shaped bodies, it is often convenient to write the field equations in rate form, for arbitrary deformations and general constitutive laws. A wide variety of equivalent but alternative forms of these equations is possible, since one may use a wide variety of stress and strain measures, a wide variety of rates of stress and strain, and a variety of coordinate
systems, such as those in the initial undeformed configuration (total Lagrangian), the currently deformed configuration (updated Lagrangian), or any other known intermediate configuration. For a detailed discussion see [1.3, 4]. Each of the alternative forms may offer advantages in specific applications. It is beyond the scope of this chapter to discuss the foregoing alternative forms. Here we state, for a finitely deformed nonlinearly elastic solid, the relevant field equations governing stress, strain, and deformation when the solid undergoes dynamic motion. For this purpose, let x j denote the Cartesian coordinates of a material particle in the undeformed solid. Let u k (xi ) be the arbitrary displacement of a material particle from the undeformed to the deformed configuration. Let Sij be the second Piola–Kirchhoff stress in the finitely deformed solid. Note that S jj is measured per unit area in the undeformed configuration. Let the Green–Lagrange strain tensor, which is work-conjugate to Sij [1.3],
11
Part A 1.2
If q ≡ f , one has the so-called associative law, and if q = f , one has a nonassociative law. Perzyna [1.25] suggests a fairly general form for ψ as
1.2 Boundary Value Problems in Elasticity
12
Part A
Solid Mechanics Topics
Part A 1.2
be εij . Let ρ0 be the mass density in the undeformed solid; b j be body forces per unit mass; ti be tractions measured per unit area in the undeformed solid, prescribed at surface St , of the undeformed solid; and let u i be prescribed displacements at Su . The field equations are [1.4]: linear momentum balance Sik (δ jk + u j,k ) + ρ0 b j = ρ0 u¨ j ,
(1.84)
angular momentum balance Sij = S ji ,
(1.85)
strain displacement relation εij = 12 (u i, j + u j,i + u k,i u k, j ) , constitutive law
(1.86)
∂W , ∂εij
(1.87)
at Si ,
(1.88)
Sij = traction boundary condition n j Sik (δ jk + u j,k ) = t j
displacement boundary condition u j = u¯ i at Su . (1.89) In the above, (·)k denotes ∂(·)/∂xk ; (¨·) denotes ∂ 2 (·)/∂t 2 ; n i are components of a unit normal to St ; and W is the strain-energy density, measured per unit volume in the undeformed body. When the deformations and strains are infinitesimal, the differences in the alternate stress and strain measures disappear. Further, considering only an isothermal linearly elastic solid, the equations above simplify as σij,i + ρ0 b j = ρ0 u¨ j , σij = σ ji , 1 εij = (u i, j + u j,i ) , 2 σij = E ijkl εkl , n i σij = t¯i at St , u i = u¯ i
at Su ,
(1.90) (1.91) (1.92) (1.93) (1.94) (1.95)
and the initial condition, u i (xk , 0) = u ∗ (xk ), u˙ i (xk , 0) = u˙ i∗ (xk , 0) at t = 0 . (1.96)
problems, unfortunately, are few and are limited to semifinite or finite domains; homogeneous and isotropic materials; and often relatively simple boundary conditions. In practice, however, it is common to encounter problems with finite but complex shape in which the material is neither homogeneous nor homogeneous and the boundary conditions are complex. The rapid development and easy accessibility of large-scale numerical codes in recent years are now providing engineers with numerical tools to analyze these practical problems, which are mostly three dimensional in nature and that commonly occur in engineering. Often, however, some three-dimensional problems can be reduced, as a first approximation, to two-dimensional problems for which analytical solutions exist. The utility of such twodimensional solutions lies not in their elegant analysis but in their use for physically understanding certain classes of problems and, more recently, as benchmarks for validating numerical modeling and computational procedures. In the following, we will reformulate the basic equations in two-dimensional Cartesian coordinates and provide analytical example solutions to two simple problems in terms of a polar coordinate system.
1.2.3 Basic Field Equations for the State of Plane Strain A plane state of strain is defined as the situation with zero displacement, say u 3 = 0. Equation (1.90) through (1.96) recast with this definition are σ11,1 + σ21,2 + ρ0 b1 = ρ0 u¨ 1 σ12,1 + σ22,2 + ρ0 b2 = ρ0 u¨ 2 , σ1,2 = σ2,1 , ε11 = u 1,1 ,
ε22 = u 2,2 ,
1 − ν2
(1.97) (1.98)
ε12 =
1 2 (u 1,2 + u 2,1 ) ,
ν σ22 , E 1−ν 1 − ν2 ν ε22 = σ22 − σ11 , E 1−ν 1+ν ε12 = σ12 , E σ33 = ν(σ11 + σ22 ) . ε11 =
σ11 −
(1.99) (1.100a) (1.100b) (1.100c) (1.100d)
1.2.2 Plane Theory of Elasticity The basic field equations and boundary conditions for a three-dimensional boundary/initial value problem in linear elasticity are given in (1.90) through (1.96). Analytical (exact) solutions to idealized three-dimensional
1.2.4 Basic Field Equations for the State of Plane Stress The plane state of stress is defined with zero surface traction, say σ33 = σ31 = σ32 = 0, parallel to the
Analytical Mechanics of Solids
1 (1.101a) (σ11 − νσ22 ) , E 1 ε22 = (σ22 − νσ11 ) , (1.101b) E 1+ν ε12 = (1.101c) σ12 , E ν ε33 = − (σ11 + σ22 ) . (1.102) E In the following, we cite three classical analytical solutions to the linear boundary value problem in Eqs. (1.97) through (1.102) for specific cases that are often of interest. ε11 =
1.2.5 Infinite Plate with a Circular Hole Consider a plane problem of an infinite linearly elastic isotropic body containing a hole of radius a. Let the body be subjected to uniaxial tension, say o∞ 11 , along the x1 axis. Let the Cartesian coordinate system be located at the center of the hole and let r and θ be the corresponding polar coordinates with θ being the angle measured from the x1 axis. The state of stress near the hole is given by [1.28] ∞ σ11 a2 σrr = 1− 2 2 r ∞ σ a4 a2 + 11 1 − 4 2 + 3 4 cos 2θ , (1.103a) 2 r r σ∞ σ∞ a2 a4 σθθ = 11 1 + 2 − 11 1 + 3 4 cos 2θ , 2 2 r r σrθ = −
∞ σ11
2
1+2
a2 r2
−3
a4 r4
(1.103b)
sin 2θ .
(1.103c)
The solution for a biaxial stress state may be obtained by superposition. For a compendium of solutions of holes in isotropic and anisotropic bodies, and for shapes of holes other than circular, such as elliptical holes, see Savin [1.28].
A basic problem for a heterogeneous medium such as a composite, is that of an inclusion (or inclusions). Consider then a rigid inclusion of radius a and assume a perfect bonding between the medium and the inclusion. The solution for stresses near the inclusion due to a far-field uniaxial tension, say o∞ 11 , are σ∞ a2 σrr = 11 1 − ν 2 2 r ∞ σ a4 a2 + 11 1 − 2β 2 − 3δ 4 cos 2θ , (1.104a) 2 r r ∞ ∞ σ11 σ11 a2 a4 σθθ = 1+ν 2 − 1 − 3δ 4 cos 2θ , 2 2 r r σrθ = −
∞ σ11
a2
a4
(1.104b)
(1.104c) 1 + β 2 + 3δ 4 sin 2θ , 2 r r 2(λ + μ) μ λ+μ β=− ν=− δ= , λ + 3μ λ+μ λ + 3μ (1.104d)
where λ and μ are Lamé constants.
1.2.6 Point Load on a Semi-Infinite Plate Consider a concentrated vertical force P acting on a horizontal straight edge of a semi-infinitely large plate. The origin of a Cartesian coordinate is at the location of load application with x1 in the direction of the force. Consider again a polar coordinate of r and θ with θ being the angle measured from the x1 axis, positive in the counterclockwise direction. The state of stress is a very simple one given by 2P cos θ π r σθθ = σrθ = 0 . σrr = −
(1.105a) (1.105b)
This state of stress satisfies the natural boundary conditions as all three stress components vanish on the straight boundary, i. e., θ = π/2, except at the origin, where σrr → ∞ as r → 0. A contour integration of the vertical component of σrr over a semicircular arc from the origin yields the statically equivalent applied force P and thus all boundary conditions are satisfied. By using stress equations of transformations, which can be found in textbooks on solid mechanics, the stresses in polar coordinates can be converted into Cartesian coordinates as 2P (1.106a) cos4 θ , σ11 = σrr cos2 θ = − πa
13
Part A 1.2
x1 –x2 plane. This state shares the same stress equations of equilibrium and strain-displacement relations with the state of plane strain, i. e. (1.97) through (1.99). Equations (1.97) and (1.98) are necessary and sufficient to solve a two-dimensional elastostatic boundary value problem when only tractions are prescribed on the boundary. Thus the stresses of the plane-stress and plane-strain solutions coincide while the strains differ. The stress–strain relations for the state of plane stress are
1.2 Boundary Value Problems in Elasticity
14
Part A
Solid Mechanics Topics
Part A 1
2P (1.106b) sin2 θ cos2 θ , πa 2P σ12 = σrr sin θ cos θ = − sin θ cos3 θ . (1.106c) πa σ22 = σrr sin2 θ = −
Since strain is what is actually being measured, the corresponding strains can be computed by (1.100) for the plane-strain state or by (1.101) for the plane-stress state.
1.3 Summary It is obviously impossible in this extremely brief review even to mention all of the important subjects and recent developments in the theories of elasticity, plasticity, viscoelasticity, and viscoplasticity. For further details,
readers are referred to the many excellent books and survey articles (see for example [1.29] and [1.30]), many of which are referenced in the succeeding chapters, in each of the disciplines.
References 1.1
1.2
1.3
1.4
1.5 1.6 1.7 1.8 1.9
1.10 1.11 1.12 1.13
1.14
C. Truesdell (Ed.): Mechanics of Solids. In: Encyclopedia of Physics, Vol. VIa/2 (Springer, Berlin, Heidelberg 1972) C. Truesdell, W. Noll: The Nonlinear Field Theories of Mechanics. In: Encyclopedia of Physics, Vol. III/3, ed. by S. Flügge (Springer, Berlin, Heidelberg 1965) S.N. Atluri: Alternate stress and conjugate strain measures, and mixed foundations involving rigid rotations for computational analysis of finitely deformed solids, with application to plates and shells. I- Theory, Comput. Struct. 18(1), 93–116 (1986) S.N. Atluri: On some new general and complementary energy theorems for rate problems in finite strain, classical elastoplasticty, J. Struct. Mech. 8(1), 61–92 (1980) A.C. Eringen: Nonlinear Theory of Continuous Media (McGraw-Hill, New York 1962) R.W. Ogden: Nonlinear Elastic Deformation (Dover, New York 2001) Y.C. Fung, P. Tong: Classical and Computational Solid Mechanics (World Scientific, Singapore 2001) M. Mooney: A theory of large elastic deformation, J. Appl. Phys. 11, 582–592 (1940) A. Abel, R.H. Ham: The cyclic strain behavior of crystal aluminum-4% copper, the Bauschinger effect, Acta Metallur. 14, 1489–1494 (1966) A. Abel, H. Muir: The Bauschinger effect and stacking fault energy, Phil. Mag. 27, 585–594 (1972) G.I. Taylor, H. Quinney: The plastic deformation of metals, Phil. Trans. A 230, 323–362 (1931) R. Hill: The Mathematical Theory of Plasticity (Oxford Univ. Press, New York 1950) W. Prager: A new method of analyzing stress and strains in work-hardening plastic solids, J. Appl. Mech. 23, 493–496 (1956) H. Ziegler: A modification of Prager’s hardening rule, Q. Appl. Math. 17, 55–65 (1959)
1.15
1.16
1.17
1.18
1.19
1.20
1.21
1.22 1.23
1.24 1.25
D.C. Drucker: A more fundamental approach to plane stress-strain relations, Proc. 1st U.S. Nat. Congr. Appl. Mech. (1951) pp. 487–491 S. Nemat-Nasser: Continuum bases for consistent numerical foundations of finite strains in elastic and inelastic structures. In: Finite Element Analysis of Transient Nonlinear Structural Behavior, AMD, Vol. 14, ed. by T. Belytschko, J.R. Osias, P.V. Marcal (ASME, New York 1975) pp. 85–98 S.N. Atluri: On constitutive relations in finite strain hypoelasticity and elastoplasticity with isotropic or kinematic hardening, Comput. Meth. Appl. Mech. Eng. 43, 137–171 (1984) Y. Yamada, N. Yoshimura, T. Sakurai: Plastic stressstrain matrix and its application to the solution of elastic-plastic problems by the finite element method, Int. J. Mech. Sci. 10, 343–354 (1968) K. Valanis: Fundamental consequences of a new intrinsic tune measure plasticity as a limit of the endochronic theory, Arch. Mech. 32(2), 171–191 (1980) Z. Mroz: An attempt to describe the behavior of metals under cyclic loads using a more general workhardening model, Acta Mech. 7, 199–212 (1969) O. Watanabe, S.N. Atluri: Constitutive modeling of cyclic plasticity and creep using an internal time concept, Int. J. Plast. 2(2), 107–134 (1986) E.C. Bingham: Fluidity and Plasticity (McGraw-Hill, New York 1922) K. Hohenemser, W. Prager: Über die Ansätze der Mechanik isotroper Kontinua, Z. Angew. Math. Mech. 12, 216–226 (1932) I. Finnie, W.R. Heller: Creep of Engineering Materials (McGraw-Hill, New York 1959) P. Perzyna: The constitutive equations for rate sensitive plastic materials, Quart. Appl. Mech. XX(4), 321–332 (1963)
Analytical Mechanics of Solids
1.27
O.C. Zienkiewicz, C. Corneau: Visco-plasticity, plasticity and creep in elastic solids – a unified numerical solution approach, Int. J. Numer. Meth. Eng. 8, 821–845 (1974) J.H. Argyris, M. Keibler: Incremental formulation in nonlinear mechanics and large strain elastoplasticity – natural approach – Part I, Comput. Methods Appl. Mech. Eng. 11, 215–247 (1977)
1.28 1.29 1.30
G.N. Savin: Stress Concentration Around Holes (Pergamon, Elmsford, 1961) A.S. Argon: Constitutive Equations in Plasticity (MIT Press, Cambridge, 1975) A.L. Anand: Constitutive equations for rate independent, isotropicelastic-plastic solid exhibitive pressure sensitive yielding and plastic dilatancy, J. Appl. Mech. 47, 439–441 (1980)
15
Part A 1
1.26
References
17
Materials Scie
2. Materials Science for the Experimental Mechanist
This chapter presents selected principles of materials science and engineering relevant to the interpretation of structure–property relationships. Following a brief introduction, the first section describes the atomic basis for the description of structure at various size levels. Types of atomic bonds form a basis for a classification scheme of materials as well as for the distinction between amorphous and crystalline materials. Crystal structures of elements and compounds are described. The second section presents the thermodynamic and kinetic basis for the formation of microstructures and describes the use of phase diagrams for determining the nature and quantity of equilibrium phases present in materials. Principal methods for the observation and determination of structure are described. The structural foundations for phenomenological descriptions of equilibrium, dissipative, and transport properties are described. The chapter includes examples of the relationships among physical phenomena responsible for various mechanical properties and the values of
2.1
Structure of Materials ........................... 2.1.1 Atomic Bonding ........................... 2.1.2 Classification of Materials .............. 2.1.3 Atomic Order ............................... 2.1.4 Equilibrium and Kinetics ............... 2.1.5 Observation and Characterization of Structure .................................
17 18 21 22 28
Properties of Materials .......................... 2.2.1 The Continuum Approximation ...... 2.2.2 Equilibrium Properties .................. 2.2.3 Dissipative Properties ................... 2.2.4 Transport Properties of Materials .... 2.2.5 Measurement Principles for Material Properties ..................
33 34 35 38 43
References ..................................................
47
2.2
31
46
these properties. In conclusion the chapter presents several useful principles for experimental mechanists to consider when measuring and applying values of material properties.
2.1 Structure of Materials Engineering components consist of materials having properties that enable the items to perform the functions for which they are designed. Measurements of the behavior of engineering components under various conditions of service are major objectives of experimental mechanics. Validation and verification of analytical models used in design require such measurements. All models employ mathematical relationships that require knowledge of the behavior of materials under a variety of conditions. Assumptions such as isotropy, homogeneity, and uniformity of materials affect both analytical calculations and the interpretation of experimental results. Regardless of the scale or purpose of the measurements, properties of materials that comprise the
components affect both the choice of experimental techniques and the interpretation of results. In measuring static behavior, it is important to know whether relevant properties of the constituent materials are independent of time. Similarly, measurements of dynamic behavior require information on the dynamic and dissipative properties of the materials. At best, the fundamental nature of materials, which is the ultimate determinant of their behavior, forms the basis of these models. The extent to which such assumptions represent the actual physical situation limits the accuracy and significance of results. The primary axiom of materials science and engineering states that the properties and performance of
Part A 2
Craig S. Hartley
18
Part A
Solid Mechanics Topics
Part A 2.1
a material depend on its structure at one or more levels, which in turn is determined by the composition and the processing, or thermomechanical history of the material. The meaning of structure as employed in materials science and engineering depends on the scale of reference. Atomic structure refers to the number and arrangement of the electrons, protons, and neutrons that compose each type of atom in a material. Nanostructure refers to the arrangement of atoms over distances of the order of 10−9 m. Analysis of the scattering of electrons, neutrons, or x-rays is the principal tool for measurements of structure at this scale. Microstructure refers to the spatial arrangement of groups of similarly oriented atoms as viewed by an optical or electron microscope at resolutions in the range 10−6 –10−3 m. Macrostructure refers to arrangements of groups of microstructural features in the range of 10−3 m or greater, which can be viewed by the unaided eye or under low-power optical magnification. Structure-insensitive properties, such as density and melting point, depend principally on composition, or the relative number and types of atoms present in a material. Structure-sensitive properties, such as yield strength, depend on both composition and structure, principally at the microscale. This survey will acquaint the experimental mechanist with some important concepts of materials science and engineering in order to provide a basis for informed selections and interpretations of experiments. The chapter consists of a description of the principal factors that determine the structure of materials, including techniques for quantitative measurements of structure, followed by a phenomenological description of representative material properties with selected examples of physically based models of the properties. A brief statement of some principles of measurement that acknowledge the influence of material structure on properties concludes the chapter. Additional information on many of the topics covered in the first two sections can be found in several standard introductory texts on materials science and engineering for engineers [2.1–4]. Since this introduction can only briefly survey the complex field of structure–property relationships, each section includes additional representative references on specific topics.
2.1.1 Atomic Bonding The Periodic Table The realization that all matter is composed of a finite number of elements, each consisting of atoms with a characteristic arrangement of elementary particles, be-
came widespread among scientists in the 19th and 20th century. Atomic theory of matter led to the discovery of primitive units of matter known as electrons, protons, and neutrons and laws that govern their behavior. Although discoveries through research in high-energy physics constantly reveal more detail about the structure of the atom, the planetary model proposed in 1915 by Niels Bohr, with some modifications due to later discoveries of quantum mechanics, suffices to explain most of the important aspects of engineering materials. In this model, atoms consist of a nucleus, containing protons, which have a positive electrical charge, and an approximately equal number of electrically neutral neutrons, each of which has nearly the same mass as a proton. Surrounding this nucleus is an assembly of electrons, which are highly mobile regions of concentrated negative charge each having substantially smaller mass than a proton or neutron. The number of electrons is equal to the number of protons in the nucleus, so each atom is electrically neutral. Elements differ from one another primarily through the atomic number, or number of protons in the nucleus. However, many elements form isotopes, which are atoms having identical atomic numbers but different numbers of neutrons. If the number of neutrons differs excessively from the number of protons, the isotope is unstable and either decays by the emission of neutrons and electromagnetic radiation to form a more stable isotope or fissions, emitting electromagnetic radiation, neutrons, and assemblies of protons and neutrons that form nuclei of other elements. The Periodic Table, shown in Fig. 2.1, classifies elements based on increasing atomic number and a periodic grouping of elements having similar chemical characteristics. The manner in which elements interact chemically varies periodically depending on the energy distribution of electrons in the atom. The basis for this grouping is the manner in which additional electrons join the atom as the atomic numbers of the elements increase. Quantum-mechanical laws that govern the behavior of electrons require that they reside in the vicinity of the nucleus in discrete spatial regions called orbitals. Each orbital corresponds to a specific energy state for electrons and is capable of accommodating two electrons. Electron orbitals can have a variety of spatial orientations, which gives a characteristic symmetry to the atom. Four quantum numbers, arising from solutions to the Schrödinger wave equation, governs the behavior of the electrons: the principal quantum number n, which can have any integer value from 1 to infinity; the azimuthal quantum number , which can have any integer
Materials Science for the Experimental Mechanist
value from 0 to (n − 1); the magnetic quantum number m , which can have any integer value between − and +; and the spin quantum number m s which has values ±1/2. The Pauli exclusion principle states that no two electrons in a system can have the same four quantum numbers. As the number of electrons increases with increasing atomic number, orbitals are filled beginning with those having the lowest electron energy states and proceeding to the higher energy states. Elements with electrons in full, stable orbitals are chemically inert gases, which occupy the extreme right column of the periodic table (group 8). Electronegative elements, which occupy columns towards the right of
2.1 Structure of Materials
Part A 2.1
the periodic table, have nearly full orbitals and tend to interact with other atoms by accepting electrons to form a negatively charged entity called an anion. The negative charge arises since electrons join the originally neutral atom. Electropositive elements occupy columns towards the left on the periodic table and ionize by yielding electrons from their outer orbitals to form positively charged cations. Broadly speaking, elements are metals, metalloids, and nonmetals. The classification proceeds from the most electropositive elements on the left of the periodic table to the most electronegative elements on the right. A metal is a pure element. A metal that incorpo8A
1A 1
2
H
H
1s1 hydrogen
1s2 helium
1.008
2A
3A
4A
5A
6A
7A
3
4
5
6
7
8
9
4.003
10
Li
Be
B
C
N
O
F
Ne
[He]2s1 lithium
[He]2s2 beryllium
[He]2s22p1 boron
[He]2s22p2 carbon
[He]2s22p3 nitrogen
[He]2s22p4 oxygen
[He]2s22p5 fluorine
[He]2s22p6 neon
6.941
9.012
10.81
12.01
14.01
16.00
19.00
20.18
11
12
13
14
16
16
17
18
Na
Mg
Al
Si
P
S
Cl
Ar
[Ne]3s1 sodium
[Ne]3s2 magnesium
22.99
24.31
3B
4B
5B
6B
7B
19
20
21
22
23
24
25
26
27
K
Ca
Sc
Ti
V
Cr
Mn
Fe
[Ar]4s1 pollassium
[Ar]4s2 calcium
[Ar]4s23d1 scandium
[Ar]4s23d2 titanium
[Ar]4s23d3 vanadium
[Ar]4s13d5 chromium
[Ar]4s23d5 manganese
39.10
40.08
44.96
47.88
50.94
52.00
55.94
37
38
39
40
41
42
Rb
Sr
Y
Zr
Nb
[Kr]5s1 nubidium
[Kr]5s2 strontium
[Kr]5s24d1 yttrium
[Kr]5s24d2 zirconium
85.47
87.62
88.91
91.22
55
57
57
Cs
Ba
1
[Xe]6s casium
132.9
87
[Ne]3s23p1 aluminum
[Ne]3s23p2 silicon
[Ne]3s23p3 phosphorus
[Ne]3s23p4 sulfur
[Ne]3s23p5 chlorine
[Ne]3s23p6 argon
11B
12B
26.98
28.09
30.97
32.07
35.45
39.95
28
29
30
31
32
33
34
35
36
Co
Ni
Cu
Zn
Ga
Ge
As
Se
Br
Kr
[Ar]4s23d6 iron
[Ar]4s23d7 cobalt
[Ar]4s23d8 nickel
[Ar]4s13d10 copper
[Ar]4s23d10 zinc
55.85
58.93
58.69
63.55
65.39
69.72
72.58
74.92
78.96
79.90
43
44
45
46
47
48
49
50
51
52
53
52
Mo
Tc
Ru
Rh
Pd
Ag
Cd
In
Sn
Sb
Te
I
Xe
[Kr]5s14d4 niobium
[Kr]5s14d5 molybdenum
[Kr]5s24d5 technetium
[Kr]5s14d7 ruthenium
[Kr]5s14d8 rhodium
[Kr]4d10 palladium
[Kr]5s14d10 silver
[Kr]5s24d10 cadmium
92.91
95.94
(98)
101.1
102.9
106.4
107.9
112.4
114.8
118.7
121.8
127.6
126.9
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
La*
Hf
Ta
W
Re
Os
Ir
Pt
Au
Hg
Tl
Pb
Bi
Po
At
Rn
[Xe]6s2 barium
[Xe]6s25d1 lanthanum
[Xe]6s24f145d2 hafnium
[Xe]6s24f145d3 tantalum
[Xe]6s24f145d4 tungsten
[Xe]6s24f145d5 rhenium
[Xe]6s24f145d6 osmium
[Xe]6s24f145d7 iridium
[Xe]6s14f145d9 platinum
[Xe]6s14f145d10
[Xe]6s24f145d10
[Xe]6s24f145d106p1
[Xe]6s24f145d106p2
[Xe]6s24f145d106p3
[Xe]6s24f145d106p4
[Xe]6s24f145d106p5
[Xe]6s24f145d106p6
gold
mercury
thallium
lead
bismuth
polonium
astatine
radon
137.3
138.9
178.5
180.9
183.9
186.2
190.2
190.2
195.1
197.0
200.5
204.4
207.2
208.9
(209)
(210)
(222)
8B
[Ar]4s23d104p1 [Ar]4s23d104p2 [Ar]4s23d104p3 [Ar]4s23d104p4 [Ar]4s23d104p5 [Ar]4s23d104p6 gallium germanium arsenic selenium bromine krypton
[Kr]5s24d105p1 [Kr]5s24d105p2 indium tin
83.80
[Kr]5s24d105p3 [Kr]5s24d105p4 [Kr]5s24d105p5 [Kr]5s24d105p6 antimony tellurium iodine xenon
131.3
88
89
104
105
106
107
108
109
110
111
112
114
116
118
Ra
Ac ~
Rf
Db
Sg
Bh
Hs
Mt
Ds
Uuu
Uub
Uuq
Uuh
Uuo
1
[Rn] 7s francium
[Rn]7s2 radium
[Rn]7s26d1 actinium
(223)
(226)
(227)
(272)
(277)
(296)
(298)
(?)
Fr
58 Lanthanide series*
Actinide series ~
[Rn]7s25f146d2 [Rn]7s25f146d3 [Rn]7s25f146d4 [Rn]7s25f146d5 [Rn]7s25f146d6 [Rn]7s25f146d7 [Rn]7s15f146d9 rutherfordium dubnium seaborgium bohrium hassium meitnerium darmstadtium
(257)
59
(260)
60
(263)
61
(262)
62
(265)
63
(266)
64
(271)
65
66
67
68
69
70
71
Ce
Pr
Nd
Pm
Sm
Eu
Gd
Tb
Dy
Ho
Er
Tm
Yb
Lu
[Xe]6s24f15d1 cerium
[Xe]6s24f3 praseodymium
[Xe]6s24f4 neodymium
[Xe]6s24f5 promethium
[Xe]6s24f6 samarium
[Xe]6s24f7 europium
[Xe]6s24f75d1 gadolinium
[Xe]6s24f9 terbium
[Xe]6s24f10 dysprosium
[Xe]6s24f11 holmium
[Xe]6s24f12 erbium
[Xe]6s24f13 thulium
[Xe]6s24f14 ytterbium
[Xe]6s24f145d1 lutetium
140.1
140.9
144.2
(147)
(150.4)
152.0
157.3
158.9
162.5
164.9
167.3
168.9
173.0
175.0
90
91
92
93
94
95
96
97
98
99
100
101
102
103
Th
Pa
U
Np
Pu
Am
Cm
Bk
Cf
Es
Fm
Md
No
Lr
[Rn]7s25f46d1 neptunium
[Rn]7s25f6 plutonium
[Rn]7s25f7 americium
[Rn]7s25f76d1 curium
[Rn]7s25f9 berkelium
[Rn]7s25f10 californium
[Xe]6s24f11 einsteinium
[Rn]7s25f12 fermium
[Rn]7s25f13 mendelevium
[Rn]7s25f14 nobelium
[Rn]7s25f146d1 lawrencium
(237)
(242)
(43)
(247)
(247)
(249)
(254)
(253)
(256)
(254)
(257)
[Rn]7s26d2 thorium
232.0
[Rn]7s25f26d1 [Rn]7s25f36d1 protactinium uranium
(231)
(238)
Liquids at room temperature
Gases at room temperature
Solids at room temperature
Fig. 2.1 The Periodic Table of the elements. Elements named in blue are liquids at room temperature. Elements named in red are
gases at room temperature. Elements named in black are solids at room temperature
19
20
Part A
Solid Mechanics Topics
Part A 2.1
rates atoms of other elements into its structure without changing its essential metallic character forms an alloy, which is not a metal since it is not a pure element. The major differences in materials have their origins in the nature of the bonds formed between atoms, which are determined by the manner in which electrons in the highest-energy orbitals interact with one another and by whether the centers of positive and negative charge of the atoms coincide. The work required to remove an ion from the substance in which it resides is a measure of the strength of these bonds. At suitable temperatures and pressures, all elements can exist in all states of matter, although in some cases this is very difficult to achieve experimentally. At ambient temperature and pressure, most elements are solids, some are gases, and a few are liquid. Primary Bonds Primary bonds are the strongest bonds that form among atoms. The manner in which electrons in the highest energy levels interact produces differences in the kinds of primary bonds. Valence electrons occupy the highest energy levels of atoms, called the valence levels. Valence electrons exhibit three basic types of behavior: atoms of electropositive elements yield their valence electrons relatively easily; atoms of electronegative elements readily accept electrons to fill their valence levels; and elements between these extremes can share electrons with neighboring atoms. The valence of an ion is the number of electrons yielded, accepted or shared by each atom in forming the ion. Valence is positive or negative according to whether the ion has a positive (cation) or negative (anion) charge. The behavior of valence electrons gives rise to three types of primary bonds: ionic, covalent and metallic. Ionic bonds occur between ions of strongly electropositive elements and strongly electronegative elements. Each atom of the electropositive element surrenders one or more electrons to one or more atoms of the electronegative element to form oppositely charged ions, which attract one another by the Coulomb force between opposite electrical charges. This exchange of electrons occurs in such a manner that the overall structure remains electrically neutral. To a good approximation, ions involved in ionic bonds behave as charged, essentially incompressible, spheres, which have no characteristic directionality. In contrast, covalent bonds involve sharing of valence electrons between neighboring atoms. This type of bonding occurs when the valence energy levels of the atoms are partially full, corresponding to valences in the vicinity of 4. These bonds
are strongly directional since the orbitals involved are typically nonspherical. In both ionic and covalent bonds nearest-neighbor ions are most strongly involved and the valence electrons are highly localized. Metallic bonds occur in strongly electropositive elements, which surrender their valence electrons to form a negatively charged electron gas or distribution of highly nonlocalized electrons that moves relatively freely throughout the substance. The positively charged ions repel one another but remain relatively stationary because the electron gas acting as glue holds them together. Metallic bonds are relatively nondirectional and the ions are approximately spherical. A major difference between the metallic bond and the ionic and covalent bonds is that it does not involve an exchange or sharing of electrons with nearest neighbors. The bonds in many substances closely approximate the pure bond types described above. However, mixtures of these archetypes occur frequently in nature, and a substance can show bonding characteristics that resemble more than one type. This hybrid bond situation occurs most often in substances that exhibit some characteristics of directional covalent bonds along with nondirectional metallic or ionic bonds. Secondary Bonds Some substances are composed of electrically neutral clusters of ions called molecules. Secondary bonds exist between molecules and are weaker than primary bonds. One type of secondary bond, the van der Waals bond, is due to the weak electrostatic interaction between molecules in which the instantaneous centers of positive and negative charge do not coincide. A molecule consisting of a single ion of an electropositive element and a single ion of an electronegative element, such as a molecule of HCl gas, is a simple example of a diatomic molecule. The center of negative charge of the system coincides with the nucleus of the chlorine ion, but the center of positive charge is displaced from the center of the ion because of the presence of the smaller, positively charged hydrogen ion (a single proton), which resides near the outer orbital of the chlorine ion. This results in the formation of an electrical dipole, which has a short-range attraction to similar dipoles, such as other HCl molecules, at distances of the order of the molecular dimensions. However, no long-range attraction exists since the overall charge of the molecule is zero. The example given is a permanent dipole formed by a spatial separation of centers of charge. A temporary dipole can occur when the instantaneous centers of charge separate because of the motion of electrons.
Materials Science for the Experimental Mechanist
2.1.2 Classification of Materials It is useful to categorize engineering materials in terms either of their functionality or the dominant type of atomic bonding present in the material. Since most materials perform several functions in a component, the classification scheme described in the following sections takes the latter approach. The nature and strength of atomic bonding influences not only the arrangement of atoms in space but also many physical properties such as electrical conductivity, thermal conductivity, and damping capacity. Ceramics Ceramic materials possess bonding that is primarily ionic with varying amounts of metallic or covalent character. The dominant features on the atomic scale are the localization of electrons in the vicinity of the ions and the relative incompressibility of atoms, leading to structures that are characterized by the packing of rigid spheres of various sizes. These materials typically have high melting points (> 1500 K), low thermal and electrical conductivities, high resistance to atmospheric corrosion, and low damping capacity. Mechanical properties of ceramics include high moduli of elasticity, high yield strength, high notch sensitivity, low ductility, low impact resistance, intermediate to low thermal shock resistance, and low fracture toughness. Applications that require resistance to extreme thermal, electrical or chemical environments, with the ability to absorb mechanical energy without catastrophic failure a secondary issue, typically employ ceramics. Metals Metallic materials include pure metals (elements) and alloys that exhibit primarily metallic bonding. The
free electron gas that permeates the lattice of ions causes these materials to exhibit high electrical and thermal conductivity. In addition they possess relatively high yield strengths, high moduli of elasticity, and melting points ranging from nearly room temperature to > 3200 K. Although generally malleable and ductile, they can exhibit extreme brittleness, depending on structure and temperature. One of the most useful features of metallic materials is their ability to be formed into complex shapes using a variety of thermomechanical processes, including melting and casting, hot working in the solid state, and a combination of cold working and annealing. All of these processes produce characteristic microstructures that lead to different combinations of physical and mechanical properties. Applications that require complex shapes having both strength and fracture resistance with moderate resistance to environmental degradation employ metallic materials. Metalloids Metalloids are elements in groups III–V of the periodic table and compounds formed from these elements. Covalent bonding dominates both the elements and compounds in this category. The name arises from the fact that they exhibit behavior intermediate between metals and ceramics. Many are semiconductors, that is, they exhibit an electrical conductivity lower than metals, but useable, which increases rather than decreases with temperature like metals. These materials exhibit high elastic moduli, relatively high melting points, low ductility, and poor formability. Commercially useful forms of these materials require processing by solidification directly from the molten state followed by solid-state treatments that do not involve significant deformation. Metalloids are useful in a variety of applications where sensitivity and response to electromagnetic radiation are important. Polymers Polymeric materials, also generically called plastics, are assemblies of complex molecules consisting of molecular structural units called mers that have a characteristic chemical composition and, often, a variety of spatial configurations. The assemblies of molecules generally take the form of long chains of mers held together by hydrogen bonds or networks of interconnected mers. Most structural polymers are made of mers with an organic basis, i. e., they contain carbon. They are characterized by relatively low strength, low thermal and electrical conductivity, low melting points, often high
21
Part A 2.1
The resulting attraction forms a weak bond at small distances and is typical of van der Waals bonds. The other secondary bond, the hydrogen bond, involves the single valence electron of hydrogen. In materials science and engineering, the most important type of hydrogen bond is that which occurs in polymers, which consist of long chains or networks of chemically identical units called mers. When the composition of a mer includes hydrogen, it is possible for the hydrogen atom to share its valence electron with identical mers in neighboring chains, so that the hydrogen atom is partly in one chain and partly in another. This sharing of the hydrogen atom creates a hydrogen bond between the chains. The bond is relatively weak but is an important factor in the behavior of polymeric materials.
2.1 Structure of Materials
22
Part A
Solid Mechanics Topics
Part A 2.1
ductility, and high formability by a variety of techniques. These materials are popular as electrical and thermal insulators and for structural applications that do not require high strength or exposure to high temperatures. Their principal advantages are relatively low cost, high formability, and resistance to most forms of atmospheric degradation. Composites Composite materials consist of those formed by intimate combinations of the other classes. Composites combine the advantages of two or more material classes by forming a hybrid material that exhibits certain desirable features of the constituents. Generally, one type of material predominates, forming a matrix containing a distribution of one or more other types on a microscale. A familiar example is glass-reinforced plastic (GRP), known by the commercial name of R . In this material, the high elastic modulus Fibreglass of the glass fibers (a ceramic) reinforces the toughness and formability of the polymeric matrix. Other classes of composites have metal matrices with ceramic dispersions (metal matrix composites, MMC), ceramic matrices with various types of additions (ceramic matrix composites, CMC), and polymeric matrices with metallic or ceramic additions. The latter, generically known as organic matrix composites (OMC) or polymer matrix composites (PMC), are important structural materials for aerospace applications.
2.1.3 Atomic Order Crystalline and Amorphous Materials The structure of materials at the atomic level can be highly ordered or nearly random, depending on the nature of the bonding and the thermomechanical history. Pure elements that exist in the solid state at ambient temperature and pressure always exhibit at least one form that is highly ordered in the sense that the surroundings of each atom are identical. Crystalline materials exhibit this locally ordered arrangement over large distances, creating long-range order. The formal definition of a crystal is a substance in which the structure surrounding each basis unit, an atom or molecule, is identical. That is, if one were able to observe the atomic or molecular arrangement from the vantage point of a single structural unit, the view would not depend on the location or orientation of the structural unit within the material. All metals and ceramic compounds and some polymeric materials have crystalline forms. Some ma-
terials can exhibit more than one crystalline form, called allotropes, depending on the temperature and pressure. It is this property of iron with small amounts of carbon dissolved that is the basis for the heat treatment of steel, which provides a wide range of properties. At the other extreme of atomic arrangement are amorphous materials. These materials can exhibit local order of structural units, but the arrangement a large number of such units is haphazard or random. There are two principal categories of amorphous structures: network structures and chain structures. The molecules of network structures lie at the nodes of an irregular network, like a badly constructed jungle gym. Nevertheless, the network has a high degree of connectivity and if the molecules are not particularly mobile, the network can be very stable. This type of structure is characteristic of most glasses. Materials possessing this structure possess a relatively rigid mechanical response at low temperatures, but become more fluid and deformable at elevated temperatures. Frequently the transition between the relatively rigid, low-temperature form and the more fluid high-temperature form occurs over a narrow temperature range. By convention the midpoint of this transition range defines the glasstransition temperature. Linear chain structures are characteristic of polymeric materials made of long chains of mers. Relatively weak hydrogen bonds and/or van der Waals bonds hold these chains together. The chains can move past one another with varying degrees of difficulty depending on the geometry of the molecular arrangement along the chain and the temperature. An individual chain can possess short-range order, but the collections of chains that comprise the substance sprawl haphazardly, like a bowl of spaghetti. Under certain conditions of formation, however, the chains can arrange themselves into a pattern with long-range order, giving rise to crystalline forms of polymeric materials. In addition, some elements, specific to the particular polymer, can bond with adjacent chains, creating a three-dimensional network structure. The addition of sulfur to natural rubber in the R is an example. process called Vulcanizing Materials that can exist in both the crystalline and amorphous states can also have intermediate, metastable structures in which these states coexist. Glass that has devitrified has microscopic crystalline regions dispersed in an amorphous network matrix. Combinations of heat treatment and mechanical deformation can alter the relative amounts of these structures, and the overall properties of the material.
Materials Science for the Experimental Mechanist
metric compound contains ions exactly in the ratios that produce electrical neutrality of the substance. In binary (two-component) compounds, the ratio of the number of ions of each kind present is the inverse of the ratio of the absolute values of their valences. For example, Na2 O has two sodium atoms for each oxygen atom. Since the valence of sodium is +1 and that of oxygen is −2, the 2 : 1 ratio of sodium to oxygen ions produces electrical neutrality of the structure.
Cubic
Simple
Body-centered
Tetragonal
Simple
Face-centered
Monoclinic
Body-centered
Simple
End-centered
Orthohombic
Simple Rhombohedral
Body-centered Hexagonal
Fig. 2.2 Bravais lattices and crystal systems
Face-centered
End-centered Triclinic
23
Part A 2.1
Crystal Structures of Elements and Compounds Because ionic bonds require ions of at least two elements, either metallic or covalent bonds join ions of pure elements in the solid state, although the condensed forms of highly electronegative elements and the inert gases exhibit weak short-range bonding typical of van der Waals bonds. Chemical compounds, which can exhibit ionic bonding as well as the other types of strong bonds, form when atoms of two or more elements combine in specific ratios. A stoichio-
2.1 Structure of Materials
24
Part A
Solid Mechanics Topics
Part A 2.1
In the solid state, patterns of atoms and molecules form lattices, which are three-dimensional arrays of points having the property that the surroundings of each lattice point are identical to those of any other lattice point. There are only 14 unique lattices, the Bravais lattices, shown in Fig. 2.2. Each lattice possesses three non-coplanar, non-collinear axes and a characteristic, unique array of lattice points occupied by structural units, which can be individual atoms or identical clusters of atoms, depending on the nature of the substance. The relative lengths of the repeat distance of lattice points along each axis and the angles that the axes make with one another define the seven crystal systems. Figure 2.2 also shows the crystal system for each of the Bravais lattices. Each of the illustrations in Fig. 2.2 represents the unit cell for the lattice, which is the smallest arrangement of lattice points that possesses the geometric characteristics of the extended structure. Repeating one of the figures in Fig. 2.2 indefinitely throughout space with an appropriately chosen structural unit at each lattice point defines a crystal structure. Lattice parameters include the angles between coordinate axes, if variable, and the dimensions of the unit cell, which contains one or more lattice points. To determine the number of points associated with a unit cell, count 1/8 for each corner point, 1/2 for each point on a face, and 1 for each point entirely within the cell. A primitive unit cell contains only one lattice point (one at each corner). The coordination number Z is the number of nearest neighbors to a lattice point. One of the most important characteristics of crystal lattices is symmetry, the property by which certain rigid-body motions bring the lattice into an equivalent configuration indistinguishable from the initial configuration. Symmetry operations occur by rotations about an axis, reflections across a plane or a combination of rotations, and translations along an axis. For example, a plane across which the structure is a mirror image of that on the opposite side is a mirror plane. An axis about which a rotation of 2π/n brings the lattice into coincidence forms an n-fold axis of symmetry. This characteristic of crystals has profound implications on certain physical properties. The geometry of the lattice provides a natural coordinate system for describing directions and planes using the axes of the unit cell as coordinate axes and the lattice parameters as units of measure. Principal crystallographic axes and directions are those parallel to the edges of the unit cell. A vector connecting two lattice points defines a lattice direction. A set of
three integers having no common factor that are in the same ratio as the direction cosines, relative to the coordinate axes, of such a vector characterizes the lattice direction. Square brackets, e.g., [100], denote specific crystallographic directions, while the same three integers enclosed by carats, e.g., 100, describe families of directions. Directions are crystallographically equivalent if they possess an identical arrangement of lattice points. Families of directions in the cubic crystal system are crystallographically equivalent, but those in noncubic crystals may not be because of differences in the lattice parameters. The Miller indices, another set of three integers determined in a different manner, specify crystallographic planes. The notation arose from the observation by 19th century crystallographers on naturally occurring crystals that the reciprocals of the intercepts of crystal faces with the principal crystallographic axes occurred in the ratios of small, whole numbers. To determine the Miller indices of a plane, first obtain the intercepts of the plane with each of the principal crystallographic directions. Then take the reciprocals of these intercepts and find the three smallest integers with no common factor that have the same ratios to one another as the reciprocals of the intercepts. Enclosed in parentheses, these are the Miller indices of the plane. For example, the (120) plane has intercepts of 1, 1/2, and ∞, in units of the lattice parameters, along the three principal crystallographic directions. Families of planes are those having the same three integers in different permutations, including negatives, as their Miller indices. Braces enclose the Miller indices of families, e.g., {120}. Crystallographically equivalent planes have the same density and distribution of lattice points. In cubic crystals, families of planes are crystallographically equivalent. Although there are examples of all of the crystal structures in naturally occurring materials, a relatively few suffice to describe common engineering materials. All metals are either body-centered cubic (bcc), facecentered cubic (fcc) or hexagonal close-packed (hcp). The latter two structures consist of different stacking sequences of closely packed planes containing identical spheres or ellipsoids, representing the positive ions in the metallic lattice. Figure 2.3 shows a plane of spheres packed as closely as possible in a plane. An identical plane fitted as compactly as possible on top of or below this plane occupies one of two possible locations, corresponding to the depressions between the spheres. These locations correspond to the upright and inverted triangular spaces between spheres in the figure. The same option exists when placing a third
Materials Science for the Experimental Mechanist
B-layer C-layer
Fig. 2.3 Plane of close-packed spheres
c
a
Fig. 2.4 Hexagonal close-packed unit cell
which is not a close-packed structure. Figure 2.6 shows the unit cell of this structure. The structure has a coordination number of eight and the unit cell contains two atoms. The density of a crystalline material follows from its crystal structure and the dimensions of its unit cell. By definition, density is mass per unit volume. For a unit cell this becomes the number of atoms in a unit cell n times the mass of the atom, divided by the cell volume Ω: ρ=
nA . Ω N0
25
Part A 2.1
identical plane on the second plane, but now two distinct situations arise depending on whether the third plane is exactly over the first or displaced from it in the other possible stacking location. In the first case, when the first and third planes are directly over one another, the stacking sequence is characteristic of hexagonal close-packed structures and is indicated ABAB. . . The close-packed, or basal, planes are normal to an axis of sixfold symmetry. Figure 2.4 shows the conventional unit cell for the hcp structure. Based on the hexagonal cell of the Bravais lattice, this unit cell contains two atoms. The c/a ratio is the height of the cell divided by the length of the side of the regular hexagon forming the base.√If the ions are perfect spheres, this ratio is 1.6333 = (8/3). In this instance, the coordination number of the structure is 12. However, most metals that exhibit this structure have c/a ratios different from this ideal value, indicating that oblate or prolate ellipsoids are more accurate than spheres as models for the atoms. Consequently, the coordination number is a hybrid quantity consisting of six atoms in the basal plane and six atoms at nearly the same distances in adjacent basal planes. Nevertheless, the conventional value for the coordination number of the hcp structure is 12 regardless of the c/a ratio. When the third plane in a close-packed structure occurs in an orientation that is not directly above the first, the stacking produces a face-centered cubic (fcc) structure. The sequence ABCABC. . . represents this stacking. The {111} planes are close-packed in this structure, the coordination number is 12, and the unit cell contains four atoms, as shown in Fig. 2.5. The third crystal structure typical of metallic elements and alloys is the body-centered cubic structure,
2.1 Structure of Materials
(2.1)
The mass of an atom is the atomic weight, A, divided by Avogadro’s number, N0 = 6.023 × 1023 , which is the number of atoms or molecules in one gram-atomic or gram-molecular, respectively, weight of a substance. The (8 − N) rule classifies crystal structures of elements that bond principally by covalent bonds, where N (≥ 4) is the number of the element’s group in the Periodic Table. The rule states that the element forms a crystal structure characterized by a coordination number of (8 − N). Thus, silicon in group 4 forms a crystal
Fig. 2.5 Face-centered cubic unit cell and {111} plane
26
Part A
Solid Mechanics Topics
Part A 2.1
Fig. 2.6 Unit cell of bcc structure
that has four nearest neighbors. Crystal structures based on this rule can be quite complex. Ionic compounds are composed of cations and anions formed from two or more kinds of atoms. These compounds form crystal structures based on two principles: (1) the entire structure must be electrically neutral and (2) the ions can be regarded as relatively rigid spheres of differing sizes forming a three-dimensional structure based on the efficient packing of different size spheres. The radius ratio rule is the principle that describes the crystal structures of many ionic compounds. This rule specifies the coordination number Z which gives the most efficient packing for spheres whose radius ratios are in a particular range. The radius ratio R employed for this calculation is the radius of the cation to that of the anion. Table 2.1 illustrates the relationship of this ratio to the resulting lattice geometry. Defects in Crystals The structures described in the previous sections are idealized descriptions that accurately characterize the arrangement of the vast majority of atomic and molecular arrangements in materials. Within any substance there will exist irregularities or defects in the structure that profoundly influence many of the properties of the material. These defects can exist on the electronic, atomic or molecular scale, depending on the substance. A common classification scheme for atomic and molecular defects in materials utilizes their dimensionality. Point defects have dimensions comparable to an atom or molecule. Line defects have an appreciable
extent along a linear path in the material, but essentially atomic dimensions in directions normal to that path. Surface defects have appreciable extent on a surface in two dimensions, but essentially atomic extent normal to the surface. Surface defects are regions of high local atomic disorder. This characteristic makes them prone to higher chemical activity than the regions that they bound. In addition, the local disorder associated with the boundaries has different mechanical properties than the bulk. These two features of surface defects cause them to be extremely important in affecting the mechanical and often the chemical properties of materials. Volume defects occur over volumes of several tens to several millions of atoms. The scale of these defects is generally at the mesoscale and above. The simplest kind of point defect occurs when an atom of a pure substance is missing from a lattice site. The vacant lattice site is a vacancy. Atoms of an element that leave their lattice sites and attempt to share a lattice site with another atom form interstitialcies. Clearly, interstitialcies are closely associated with vacancies. This combination typically occurs under conditions of neutron radiation, and the associated damage is a limiting factor to the use of materials in such environments. A lattice site occupied by an atom different from the host is a substitutional impurity, creating a substitutional solid solution with the host as solvent and the impurity as solute. The concentration of such impurities that a host element can tolerate is dependent in large part on the relative sizes of the impurity and the host atoms. Typically, solid solubility is extremely limited if the atomic sizes of solute and solvent differ by more than 15%. Interstitial solid solutions occur when smaller solvent atoms occupy some of the spaces (interstices) between solute atoms. Only five elements – C, N, O, H, and B – can be interstitial solutes in metals, principally because of the relative sizes of the atoms involved. The systematic or random insertion into linear polymers of mers having different chemical compositions forms copolymers. Since the substituent mers constitute a disruption in the basic polymer chain, they are substi-
Table 2.1 Radius ratios and crystal lattice geometry Z
R
2 3 4 6 8
0.000–0.155 0.155–0.225 0.225–0.414 0.414–0.732 0.732–1.000
Exact range √ 0 to 23 3 − 1 √ √ 2 1 3 √3 − 1 to √ 2 6−1 1 2−1 2 6 − 1 to √ √ 2 − 1 to 3 − 1 √ 3 − 1 to 1
Lattice geometry Linear Trigonal planar Tetrahedral Octahedral Cubic
Materials Science for the Experimental Mechanist
the region of the crystal that has experienced slip from that which has not. This boundary forms a linear crystal defect called a dislocation. As a dislocation passes over its slip plane, one part of the crystal moves relative to the other by a lattice vector, the Burgers vector, which is generally, but not always, one atomic spacing in the direction of the highest density of atoms. Dislocations are an important source of internal stress in crystalline materials and their motion is the principal mechanism of permanent deformation. Further information on the behavior of dislocations can be found in standard references [2.5, 6]. Homogeneous crystalline materials generally consist of an aggregate of grains, which are microscopic crystalline regions having differing orientations. That is, the principal crystallographic directions in each grain have different orientations relative to an external coordinate system than corresponding directions in neighboring grains. Grain boundaries, which are surfaces across which grain orientations change discontinuously, separate the grains. Since the grain boundaries contain most of the atomic disorder that accommodates the orientation change, they are surface defects. Grain boundaries permeate the material, forming a three-dimensional network that has a shape and topology determined by its thermomechanical history. Close-packed crystal structures, such as facecentered cubic and hexagonal close-packed, exhibit another form of surface defect called a stacking fault. This occurs when local conditions of deformation or crystal growth produce a stacking sequence that is locally different from that for the crystal structure. For example, suppose the stacking sequence of closepacked planes in the sequence ABC|ABC. . . is locally disrupted across the surface indicated by the vertical line so that to the left of the line the crystal is shifted to cause A planes to assume B stacking, B planes to assume C stacking and C planes to assume A stacking. Then the stacking sequence would be ABC|BCA. . . This is topologically equivalent to the removal of a plane of A stacking, creating a three-layer hcp structure while preserving the face-centered cubic structure on either side of the fault plane. Such a configuration is an intrinsic stacking fault and is associated with the formation and motion of certain kinds of dislocations in face-centered cubic crystals. Materials can also consist of an aggregate of regions having differing chemical composition and crystal structure from one another. Each region that is chemically and physically distinct and separated from the rest of the system by a boundary is called a phase. Each
27
Part A 2.1
tutional point defects in the same sense as solute atoms in a solid solution. The semiconducting properties of metalloids are due to the thermal excitation of electrons from filled valence bands into sparsely populated conduction bands. In a pure substance, this behavior is intrinsic semiconductivity. The addition of small amounts of impurities (of the order of one impurity atom per million host atoms) that have a different chemical valence significantly modifies the electrical conductivity of many such substances. These substitutional impurities, which are electronic defects as well as lattice defects, contribute additional electronic energy states that can contribute to conductivity. This is extrinsic semiconductivity. A donor impurity has more valence electrons than the host does, and contributes electron energy states. Acceptor impurities have a lower valence than the host, leaving holes, which can contribute to the transport of electrical charge, in the valence energy band. The holes are defects in the electronic structure having equal and opposite charges to the electrons. Point defects in ionic compounds must maintain electrical neutrality. One or more defects possessing equal and opposite charges must be present to cancel any local charge caused by the addition or removal of ions from lattice sites. One such defect is the Frenkel defect, a cation vacancy associated with a nearby cation interstitial. The excess charge created by the interstitial cation balances the charge deficiency due to the vacancy. In principle, such defects are possible with anions replacing cations, but the relatively large size of anions generally precludes the existence of anion interstitials. The other important type of point defect in ionic materials is the Schottky defect, which is a cation vacancy–anion vacancy pair where the ions have equal and opposite charges. Clearly, the removal of an electrically neutral unit maintains local electrical neutrality. Both types of defects can affect electrical and mechanical properties of the substance. Permanent deformation that preserves the number of lattice sites in crystalline materials generally occurs by slip, also called glide, which is the motion of one part of the crystal relative to the other across a densely populated atomic plane, the slip plane, in a densely populated atomic direction, the slip direction. For energetic reasons this motion does not occur simultaneously across the entire crystal, but commences at a free surface or region of high internal stress and propagates over the atomic plane until it either passes out of the crystal or encounters a barrier to further motion. At any instant during this propagation, a boundary separates
2.1 Structure of Materials
28
Part A
Solid Mechanics Topics
Part A 2.1
phase can contain a network of grain boundaries. However, the interphase boundaries that separate the phases are surface defects that differ from grain boundaries, since the regions they separate differ in not only spatial orientation and chemical composition but also, in most cases, in crystal structure. A multiphase material has a system of interphase boundaries whose extent and topology depend not only on the thermomechanical history of the material but also on the relative amounts of the phases present. Cracks and voids caused by solidification are examples of volume defects. These often arise during processing and can be significant sources of mechanical weakness and vulnerability to environmental attack of the material. Gases formed during fission of nuclear fuel can also form internal voids during operation, causing swelling and distortion on a macroscopic scale.
2.1.4 Equilibrium and Kinetics Thermodynamic Principles The overall composition and processing history determine the arrangements of groups of atoms in the microstructure. The resulting structure of the material determines its response to many conditions of measurement. Concepts of thermodynamic equilibrium, the rate of approach to equilibrium, and the response of the material to its physical and mechanical environment govern relationships that connect composition, processing, and microstructure. A thermodynamic system is any collection of items separated from their surroundings by a real or imaginary interface, which can be permeable or impermeable to the exchange of energy. Thermodynamics is the study of the laws that govern
1. the exchange of energy between the system and its surroundings 2. the energy content of such a system 3. the capacity of the system to do work and 4. the direction of heat flow in the system. The sum of the kinetic and potential energies of all components of the system is the internal energy U, which measures the energy content of a system. The first law of thermodynamics relates the rate of change of internal energy of a system to the rate of heat exchange with the surroundings and the rate of work done by external forces U˙ = Q˙ − P ,
(2.2)
where Q˙ represents the rate of heat exchanged with the surroundings, P is the power exerted by external forces, and the superposed dot indicates the derivative with respect to time. The second law of thermodynamics states that the rate of production of entropy S at an absolute temperature T , defined as Q˙ (2.3) , T must be ≥ 0. For a real system, changes in S refer to changes from a standard temperature and pressure. The internal energy less the product of the volume of the system V and the pressure on the system, P, is the heat content or enthalpy H. The relationship connecting these thermodynamic state variables is S˙ =
H = U + PV .
(2.4)
The definition of free energy, which is the capacity of the system to do work, differs when dealing with gaseous and condensed systems of matter. The Gibbs free energy G employed for condensed systems is related to other thermodynamic variables by G = H − TS .
(2.5)
The following discussion designates free energy by F without reference to the state of the system. Changes in the free energy of a system occur when variables that define the state of the system do work on the system. Gradients in the free energy of a system with respect to these state variables are generalized thermodynamic forces characterized by adjectives that describe the nature of the variable – chemical, thermal, mechanical, electrical, etc. – giving rise to the force. Absolute equilibrium exists when these forces sum vectorially to zero, i. e., the free energy of the system is an absolute minimum. A system in equilibrium with one or more type of force, while not being in equilibrium with others, is in a state of partial equilibrium. Equilibria can be stable, metastable or unstable. If small changes in the thermodynamic forces tend to alter the state of the system from its equilibrium condition, the equilibrium is unstable. If such changes tend to restore the system to its equilibrium state, the equilibrium is stable if the original state represents an absolute minimum in the free energy of the system or metastable if the minimum is local. These concepts are illustrated in Fig. 2.7, which depicts various states of mechanical equilibrium. Although materials are rarely in thermodynamic equilibrium with their surroundings during engineering applications, the extent of deviation from its equilibrium state determines the propensity of a structure to change
Materials Science for the Experimental Mechanist
with time. Since changes in structure cause changes in properties, the suitability of a material for a particular engineering application may also change.
2.1 Structure of Materials
29
Force ΔF *
P = exp(−ΔF ∗ /kT ) ,
(2.6)
when ΔF ∗ is expressed per atom or mole of the substance. In (2.6) k is Boltzmann’s constant, the universal gas constant per atom or molecule. The Arrhenius equation expresses the rate of change of many chemical reactions and solid-state processes: r = ν0 exp(−ΔF ∗ /kT ,
m n (a)
Phase Diagrams The structure of engineering materials at the microscale generally consists of regions that are physically and chemically distinct from one another, separated from the rest of the system by interfaces. These regions are called phases. The spatial distribution and, to a limited extent, the chemical composition of phases can be altered by thermomechanical processing prior to the end use of the material. Sometimes service conditions
m y
(b)
l
m
(c)
x
Fig. 2.7 (a) Metastable, (b) unstable, and (c) stable mechanical equilibrium states for a brick (after Barrett et al. [2.7])
can cause changes in the microstructure of a material, usually with accompanying changes in properties. Knowledge of the phases present in a material at various temperatures, pressures, and compositions is essential to the prediction of its engineering properties and to assessing its propensity for change under service conditions. The phase diagram, a map of the thermodynamically stable phases present at various temperatures, pressures, and compositions, presents this information in a graphical form. The number of degrees of freedom f (≥ 0) of a system refers to the number of environmental and composition variables that can be changed without changing the number of phases in equilibrium. The phase rule relates f to the number of distinct chemical species or components C and the number of phases present Φ: f = C −Φ+2 ,
(2.7)
in which the rate of change r is the product of the frequency of attempts at change ν0 and P is the probability of a successful attempt. Figure 2.8 illustrates the process schematically for the case of a thermally activated process assisted by external stress.
ΔF
l
(2.8)
ΔF (1-3) ΔF * (1) ΔF
(1-2)
(3)
(2) A*
A(1-2)
A0
Fig. 2.8 Free energy (F) versus slipped area ( A0 ) for deformation processes
Part A 2.1
Rate of Approach to Equilibrium In order for a system that is in metastable equilibrium in its current state (state 1) to attain the (stable or metastable) equilibrium state with the next lowest free energy (state 2), passage through an unstable equilibrium state (state 3) whose free energy is higher than that of states 1 or 2 is generally required. State 3 is an activated state and constitutes a barrier to the transition of the system from state 1 to the lower free energy of state 2. The free energy difference between states 1 and state 3 ΔF (1−3) must be supplied by internal and external sources in order to effect the transition from the metastable state to the activated state, from which subsequent transition to the next lower energy state is assumed to be spontaneous. The nature of the barrier determines the free energy difference. The free energy ΔF (1−3) contains both thermal energy and work done by external fields during activation. The difference between ΔF (1−3) and the work done by external sources is called the free energy of activation ΔF ∗ . The Boltzmann factor P is the probability that the system will change its state from state 1 to state 3
30
Part A
Solid Mechanics Topics
Part A 2.1
where 2 refers to temperature and pressure. The degrees of freedom in phase diagrams of condensed systems at constant pressure (isobaric diagrams) is given by a form of equation (2.6) in which 2 is replaced by 1, since the pressure is fixed. Either the weight percent or atomic percent of the components specifies the composition of a multicomponent system. In many engineering applications, weight percent is preferred as a more practical guide to the relative amounts of components. In scientific studies of the nature of diagrams formed from elements having similar chemical characteristics, atomic fraction is preferred. For an ncomponent system, the weight percent of component i can be calculated from its atomic percent by the relation (a/o)i (at.wt.)i × 100% , (2.9) (w/o)i = n (a/o) j (at.wt.) j j=1
where (a/o) and (w/o) are the atomic percent and weight percent, respectively, and at.wt. refers to the atomic weight of the subscripted substance. The summation extends over all components. A similar expression relates the atomic percent of a component to the weight percents and atomic weights of the components. It is impossible to represent a phase diagram in three dimensions for a material consisting of more than three components. More commonly, diagrams that show the stable phases for a two-component (binary) system at one atmosphere pressure and various temperatures are used as guides to predict the stable phases. This permits a two-dimensional map with temperature as the ordinate and composition as the abscissa to represent the possible structures. ASM International offers an extensive compilation of binary phase diagrams of metals [2.8]. A similar compilation is available for ceramic systems [2.9]. Three-component (ternary) phase diagrams are more difficult to represent since they require two independent compositional variables in addition to temperature. The most common three-dimensional representation is a prism in which the component compositions are plotted on an equilateral triangle base and the temperature on an axis normal to the base. Ternary diagrams of many metallic systems have been determined are available as a compilation similar to that for the binary systems [2.10]. Phase diagrams not only give information on the number and composition of phases present in equilibrium, but also provide the data necessary to calculate the relative amounts of phases present at any temperature. Figure 2.9 illustrates this principle, the inverse lever law, using the silver–copper binary diagram as an example.
From this diagram we note that an alloy of 28.1 w/o Cu solidifies at 779.1 ◦ C into a solid consisting of two solid phases: a silver-rich phase α containing 8.8 w/o Cu and a copper-rich phase β containing 92.0 w/o Cu. This alloy, which passes directly from the liquid state to the solid state without going through a region of solid and liquid in equilibrium, is a eutectic. To determine how much of each phase is present in the eutectic alloy at the solidification temperature, we note that, while the overall composition of the alloy c0 is 28.1 w/o Cu, it is a mixture of copper- and silver-rich phases, each having a known composition. Performing a mass balance on the amount of copper in the alloy yields the result: cβ − c0 × 100% (%)α = cβ − cα (92 − 28.1) × 100% = 76.8% (2.10) = (92 − 8.8) for the weight percentage of the silver-rich phase in the alloy. The inverse lever law gets its name from the fact that the numerator in (2.10) is the distance on the composition axis from the overall alloy composition to the composition of the copper-rich phase cβ on the opposite side of the diagram from the silver-rich phase whose percentage is to be determined. The denominator is the entire distance between the compositions of the copperrich and silver-rich phases. The calculation is analogous to balancing the relative amounts of the phases on a lever whose fulcrum is at the overall alloy composition. While the numerical result shown illustrates the calculation for the eutectic alloy and temperature, the principle applies to any constant temperature as long as we choose the appropriate overall alloy composition Temperature (°C) 1200 1100 Liquid 1000 961.93 °C 900 800 8.8 % 28.1 % 700 (Ag) 600 500 400 300 200 Ag 10 20 30 40 50
1084.87 °C
(Cu) 779.1°C 92 %
60
70
80 90 Cu wt % copper
Fig. 2.9 Silver–copper phase diagram at 1 atm pressure
Materials Science for the Experimental Mechanist
and the compositions of the phases in equilibrium at that temperature.
2.1.5 Observation and Characterization of Structure
Metallographic techniques Metallographic approaches to studying the structure of materials are either surface techniques or transmission techniques. Surface techniques rely on images formed by the reflection of a source of illumination by a prepared surface. The wavelength of the illuminating radiation and the optical properties of the observation system determine the resolution of the technique. Optical metallography employs a reflecting microscope and illumination by visible light to examine the polished and etched surface of a specimen either cut from bulk material or prepared on the surface of a sample, taking care not to introduce damage during the preparation. Consequently, the examination is generally a destructive technique. Magnifications up to approximately 1200 × are possible with careful specimen preparation. Properly chosen etches reveal the arrangement of grain boundaries, phases and defects intersected by the plane of polish. Contrast arises from the differing reflectivities of the constituents of the microstructure. Interpretation of micrographs to relate the observed structure to the properties and behavior of the material requires experience and knowledge of the composition and thermomechanical history of the material. Scanning electron microscopy (SEM) employs a beam of electrons as an illuminating source [2.11]. The de Broglie wavelength of an electron is λ = h/ p, where h is Planck’s constant and p is the momentum of the electron. The de Broglie wavelength of electrons varies with the accelerating voltage V since for an electron eV = p2 /2m, where e and m are the charge and mass, respectively, of the electron. Electromagnetic lenses use the charge on the electron beam to condense, focus, and magnify it. Magnifications ob-
tained by this technique range from those characteristic of optical microscopy to nearly 100 times the best resolution obtained from optical techniques. Contrast among microconstituents arises because of their differing scattering powers for electrons. Since electron optics permits a much greater depth of field than is possible with visible light, SEM is the observation tool of choice for examining surfaces with a high degree of spatial irregularity, such as those produced by fracture. While the images are nearly always two-dimensional sections through three-dimensional structures, stereo microscopy is widely used in the examination of fracture surfaces. Although this method can employ an appreciable range of wavelengths, it is necessary to operate in a vacuum and to provide a means of dissipating any electrical charge on the specimen induced by the electron beam. In recent years, the development of special environmental chambers has permitted the observation of nonconductive materials at atmospheric pressure. Transmission metallographic techniques produce images that are the projection of the content of the irradiated volume on the plane of observation. Clearly, such techniques rely on the transparency of the material to the illumination. This requires the preparation of thin sections of the material, followed by treatments to improve the contrast of structural features, then observed by transmission microscopy. Visible light generally suffices as the illuminating source for biological materials. Since most engineering materials are not transparent to visible light, observation by transmitted radiation is less common for these materials. The following section discusses both of the principal exceptions, transmission electron microscopy (TEM) and x-ray radiography. Information obtained from metallographic observations serves a variety of purposes: to determine the microstructural state of a material at various stages of processing, to reveal the condition of material in a failed engineering part, and to obtain a semiquantitative estimate of some types of material behavior. All cases where the images represent plane sections require analysis by stereological techniques to obtain quantitative information that for relating structure to properties [2.12]. For a microstructure containing two or more microconstituents, such as phases, inclusions or internal cavities, the simplest parametric characterization is the volume fraction VV (n) of the n-th microconstituent. It is easily shown that this is also equal to the area fraction A A (n) of the n-th constituent on an observation plane, which can easily be measured on a polished metallographic specimen [2.12].
31
Part A 2.1
In order to implement in the selection and design of materials and processes the axiom that structure at various levels determines the properties of materials, it is necessary to have means of examining, measuring, and describing quantitatively the structure at various scales. The information so obtained then leads to the development, validation, and verification of models that describe the behavior of engineering structures. The following sections describe two types of characterization techniques that are useful for this purpose.
2.1 Structure of Materials
32
Part A
Solid Mechanics Topics
Part A 2.1
Another common measurement of microstructure is the mean linear intercept Λ(t) or its reciprocal PL (t), the intercept density, of a test line parallel to the unit vector t with the traces of internal boundary surfaces on an observation plane. The intercept density is the number of intersections per unit length of the test line with the feature of interest. Since microstructures are generally anisotropic PL (t) depends on the orientation of the test line. The volume average of all measurements is an average intercept density, PL ; its reciprocal is the mean linear intercept Λ. The grain size refers to the mean linear intercept of test lines with grain boundaries. When employing this terminology, remember that the measurement is actually the mean distance between grain boundaries in the plane of measurement and may not apply to the three-dimensional structure. In addition, the concept of size implies an assumption of shape, which is not included in the measurement. Nevertheless Λ remains the most widely used quantitative characterization of microstructure in the materials literature. Similar measurements can be made of the intersections of test lines with interphase boundaries and internal cavities, or pores. The associated mean linear intercepts are phase diameters or pore diameters, respectively. The intercept density for a particular class of boundaries also measures the total boundary area per unit volume SV through the fundamental equation of stereology: SV = 2 PL .
(2.11)
This quantity is important when studying properties influenced by phenomena that occur at internal boundaries. Diffraction Techniques In an irradiated array of atoms, each atom acts as a scattering center, both absorbing and re-radiating the incident radiation as spherical wavelets having the same wavelength as the incident wave. When the wavelength of the incident radiation is comparable to the spacing between atoms, interference effects can occur among the scattered wavelets. A crystalline material acts as a regular array of scattering centers, and produces a pattern of scattered radiation that is characteristic of the array and the wavelength of the radiation. Amorphous materials also produce scattering, but the lack of long-range atomic order precludes the development of patterns of diffracted beams. Diffracted rays occur by the constructive interference of radiation reflected from atomic planes. The model proposed by W. H. Bragg and W. L. Bragg, illustrated in Fig. 2.10, describes the phenomenon.
Radiation of wavelength λ is incident at an angle θ on parallel atomic planes separated by a distance d. Scattered radiation from adjacent planes interferes constructively, producing a scattered beam of radiation, when the path difference between rays scattered from adjacent planes is an integral number n of wavelengths. The relationship describing this phenomenon is Bragg’s law, nλ = 2d · sin θ ,
(2.12)
which is the basis for all measurements of the atomic dimensions of crystals. X-rays, a highly energetic electromagnetic radiation having a wavelength the same order of magnitude as the spacing between atoms in crystals, inspired the original derivation of (2.12) [2.13, 14]. If the crystal is sufficiently thin to permit diffracted beams to penetrate it, transmission diffraction patterns occur on the side of the crystal opposite to the incident radiation. However, even if the diffracted beams cannot penetrate the crystal, back-reflection diffraction patterns occur on the same side as the incident beam. Crystal structure analysis employs both types of patterns. One method of identifying unknown materials employs analysis of diffraction patterns formed by radiation of known wavelength to determine the lattice parameter and crystal structure of an unknown substance, which is then compared with a database of known substances for identification [2.15, 16]. Both incident and diffracted X-radiation can penetrate substantial thicknesses of many materials, rendering this diffraction technique useful for determining the condition of material in the interior of an engineering part. Lattice distortion giving rise to internal stress, averaged over the irradiated volume, can be determined by comparing the interplanar spacings of a material containing internal stress with those of a material free of internal stress [2.17]. This technique of x-ray stress analysis is extremely valuable in deter-
θ
θ θ d
Fig. 2.10 Derivation of Bragg’s law
Materials Science for the Experimental Mechanist
trons and neutrons, which have de Broglie wavelengths comparable to the interatomic spacing of the crystals. Electron beams are employed in both transmission and back-reflection modes to reveal information on the crystal structure and defect content of materials. The fact that electron beams possess electrical charge makes it possible to employ electromagnetic lenses to condense, focus, and magnify them. Transmission electron microscopy (TEM) uses diffracted electron beams transmitted through material and subsequently magnified to reveal features of atomic dimensions [2.21]. Since electron beams are highly absorbed by most materials, specimens examined in TEM are only a few thousand atoms thick. Nevertheless, this technique reveals much useful information about the nature and behavior of dislocations, grain boundaries and other atomic-scale defects. Orientation imaging microscopy (OIM) [2.22] employs back-reflection electron diffraction patterns to form maps called pole figures by determining the orientation of individual grains. These maps describe the orientation distribution of grains in a material, which is a major cause of the anisotropy of many bulk properties. The greater penetrating power of neutron beams reveals information from greater thicknesses of material than x-rays [2.23]. Since these beams are not electrically charged, their magnification by electromagnetic lenses is not possible. Therefore, their principal use is for measurements of changes in lattice spacings due to internal stresses, and not for forming images. In addition to revealing the structure of materials, many advanced techniques reveal not only the structure but also the chemistry of a substance at the microscale. While techniques such as the three-dimensional (3-D) atom probe, Auger electron spectroscopy and imaging, Z-contrast microscopy, and many others complement those for structural examination and often employ similar physical principles; a complete survey is beyond the scope of this review.
2.2 Properties of Materials Material properties are attributes that relate applied fields to response fields induced in the material. Applied and induced fields can be of any tensorial rank [2.24, 25]. Fields are conjugate to one another if the applied field does an incremental amount of work on the system by causing an incremental change in the induced field. External fields and the associated field variables include temperature T , stress τ, and electrical (E) and
magnetic (H) fields; their respective conjugate fields are entropy S, strain ε, electrical displacement D, and magnetic induction B. Cross-effects occur when changes in an applied field cause changes in induced fields that are not conjugate to the applied field. Consider a system subjected to a cyclic change of applied field variables such that each variable changes arbitrarily while the others are constant, then the pro-
33
Part A 2.2
mining residual stresses in heat-treated steel parts, for example. It has the advantage that lattice strain, which is the source of internal stress, is the direct result of the measurement. This is in contrast to the calculation of stress from measurements of strain on the external surface of a material, which include components due to both lattice strain and the stress-free, permanent strain caused by dislocation motion. When stress is calculated from such surface measurements, the assumption that dislocation motion is absent or negligible is implicit [2.18]. Diffraction contrast from scattered x-rays forms the basis for x-ray topography of crystals, useful in the study of the defect structure of highly perfect single crystals used in electronic applications [2.19]. Magnified diffraction spots from crystals reveal images of the structure of the material with a resolution comparable to the wavelength of the radiation. Small changes in the orientation and spacing of atomic planes due to the presence of internal defects change the diffraction conditions locally, creating contrast in the image of the diffracted beam. The availability of high-intensity xray sources from synchrotrons has greatly increased the applicability and usefulness of this technique. Radiography also forms images by the interaction of material with x-rays, but in this case, the contrast mechanism is by the differential absorption of radiation caused by varying thicknesses of material throughout an irradiated section as well as by regions having differing densities, which affects the ability of material to absorb x-rays [2.20]. Radiography can reveal macroscopic defects and heterogeneous distributions of phases in materials. Since contrast is not due to diffraction by the structure, this process cannot provide information on its crystal structure or the state of lattice strain in the material. The principles of diffraction apply not only to electromagnetic radiation but also to the scattering of highly energetic subatomic particles, such as elec-
2.2 Properties of Materials
34
Part A
Solid Mechanics Topics
Part A 2.2
cess reverses until the variables have their initial values. If such a closed cycle occurs under conditions such that the system is continuously in equilibrium with its surroundings, the thermodynamic states at the beginning and the end of the process will be the same and no net work is done. Properties that relate conjugate fields in this case are equilibrium properties and depend only on the thermodynamic state of a system, not its history. A caloric equation of state relates conjugate fields, which permits the description of the relationship between applied and induced fields in terms of appropriate derivatives of a thermodynamic potential. If processes that occur during the cycle dissipate energy, they produce entropy and the system is not in the same state in the initial and final conditions. Although the applied field variables are the same at the beginning and end of the cycle, the conjugate induced variables do not return to their original values. The change of thermodynamic state occurs because of irreversible changes to the structure of the material caused, at least in part, by changes in the internal structure of the system that occur during the cyclic change. Associated material properties are dissipative and exhibit hysteresis. Dissipative properties are dependent on time and the history of the system as well as its current thermodynamic state. However, in some cases it is possible to relate these properties to appropriate derivatives of a complex dissipative potential [2.24]. In general, equilibrium properties are structure insensitive, while dissipative properties are structure sensitive. The search for additional state variables that depend on the internal structure of the material is a subject of much continuing research. Transport processes are dynamic processes that cause the movement of matter or energy from one part of the system to another. These produce a flux of matter or energy occurring in response to a conjugate thermodynamic force, defined as the gradient of a thermodynamic field [2.26]. Attributes that connect fluxes and forces are generally structure-insensitive material properties.
2.2.1 The Continuum Approximation Continuity The complex nature of real materials requires approximation of their structure by a mathematical concept that forms a basis for calculations of the behavior of engineering components. This concept, the continuous medium, replaces discrete arrays of atoms and molecules with a continuous distribution of matter. Fields and properties defined at every mathematical
point in the medium are continuous, with continuous derivatives, except at a finite number of surfaces separating regions of continuity [2.24]. The process that defines properties at a point in the medium consists of taking the limit of the volume average of the property over increasingly smaller volumes. For sufficiently large volumes the average will be independent of sample size. However, as the volume sampled decreases below a critical range, the volume average will exhibit a dependence on sample size, which is a function of the nature of the property being measured and the material. The smallest sample volume that exhibits no size dependence defines the continuum limit for the material property. The continuum approximation assigns the value of the size-independent volume average of the property to a point at the centroid of the volume defined by the continuum limit. It follows that, when the size of a sample being tested approaches the continuum limits of relevant properties, results can be quite different from those predicted by a continuum model of the material. This limit depends on the material, its structural state, and the property being measured, so that all need to be specified when assigning a value to the continuum limit. The continuum approximation employs the concept of the material particle to link the discrete nature of real materials to the continuum. By the argument above, the material attributes of such a particle must be associated with a finite volume, the local value of the continuum limit for the attributes. As noted earlier, continuum limits may differ for different properties; consequently the effective size associated with a material particle will depend on the property associated with the continuum. Coordinate systems based on material particles, in contrast to those based on the crystal lattice, must necessarily be continuous by the assumption of global continuity of the medium. Despite the inherent differences in concepts of material structure, it is possible to develop models of many material properties based on atomic or molecular characteristics that interface well with the continuum model at the scale of the continuum limit. These limits can only be determined experimentally or by the comparison of properties calculated from physically based models of atomic arrays of various sizes. Such models form essential links between continuum mechanics and the knowledge of structure provided by materials science. Homogeneity The continuous medium used for calculation of the behavior of engineering structures also possesses the
Materials Science for the Experimental Mechanist
Isotropy The usual model of a homogeneous continuous medium also assumes that properties of the material are isotropic, i. e., they are independent of the direction of measurement. This assumption generally results in the minimum number of independent parameters that describe the property and simplifies the math-
ematics involved in analysis. However, isotropy is infrequently observed in real materials, and neglect of the anisotropic nature of material properties can lead to serious errors in estimates of the behavior of engineering structures. Properties of materials possess symmetry elements related to the structure of the material. The following Gedanken experiment illustrates the meaning of symmetry of a property [2.25]. Measure the property relative to some fixed set of coordinate axes. Then operate on the material with a symmetry operation. If the value of the property is unchanged, then it possesses the symmetry of the operation. Neumann’s principle states that the symmetry elements of any physical property of a crystal must include the symmetry elements of the point group of the crystal. Notice that the principle does not require that the crystal and the property have the same symmetry elements, just that the symmetry of the property contains the symmetry elements of the crystal. Since an isotropic property has the same value regardless of the direction of measurement, it contains all possible point groups. As mentioned above, bulk properties of polycrystalline and multiphase materials are appropriate averages of the properties of their microconstituents, taking account of the distribution of composition, size, and orientation. A common source of bulk anisotropy in a material is the microscopic variation in orientation of its grains or microconstituents. An orientation distribution function (ODF) describes the orientation distribution of microscopic features relative to an external coordinate system. Depending on the feature being measured, quantitative stereology or x-ray diffraction analyses provide the information required to determine various types of ODFs. Used in conjunction with the properties of individual crystals of constituent phases, ODFs can describe the anisotropy of many bulk properties, such as the elastic anisotropy of metal sheet formed by rolling.
2.2.2 Equilibrium Properties Although the definition of equilibrium properties is phenomenological, without reference to the structure of the material, values of the properties depend on the structure of materials though models described in treatises on condensed-matter physics and materials science [2.27]. Properties described in the following sections are all first order in the sense that they arise from an assumed linear relationship between applied and induced fields. However, most properties have measurable de-
35
Part A 2.2
property of homogeneity, that is, properties at a material point do not depend on the location of the point in the medium. While this assumption is reasonably accurate for single-phase materials of uniform composition, it no longer applies to multiphase materials at the microscale. In the latter case, properties of the bulk depend on appropriate averages of the properties of the constituent phases, which include parameters such as the volume fraction of each phase, the average size of the particles of each phase, and in some cases the orientation of the phases relative to one another and to externally applied fields. Higher order models of multiphase materials treat each phase as a distinct continuum with properties distinct from other phases. Physical fields within the body are also influenced by the nature, orientation, and distribution of the phases present. Average values of induced internal fields determined from the external dimensions of a body and fields applied to the surfaces may not accurately reflect the actual conditions at points in the interior of the body due to different responses from constituent phases within the material. Material properties determined from the bulk response to these mean fields may differ significantly from similar properties measured on homogeneous specimens of the constituent phases. Measurements of local fields rely on techniques that sample small, finite volumes to determine local material response, then inferring the values of the fields producing the response. Since a quantitative determination of variables that determine the bulk properties of multiphase materials is often difficult, time-consuming, and expensive, experimental measurements on bulk specimens typically determine these properties. It is important to realize that applying the results of such measurements implicitly assumes that differences in structure of the material at the microscale have a negligible effect on the resulting properties. Structural variability due to inhomogeneity can be taken into account experimentally by determining properties of the same material with a range of structures and assigning a quantitative value to the uncertainty in the results.
2.2 Properties of Materials
36
Part A
Solid Mechanics Topics
Part A 2.2
pendencies on other applied fields. Such field-induced changes cause second-order effects, such as optical birefringence and the electro-optical effect, where firstorder properties depend on strain and electrical field, respectively. For compactness, this review will not consider these effects, although many of them can provide the basis for useful measurements in experimental mechanics. The usual description of equilibrium properties employs conjugate effects. In principle, any change in an applied field produces changes in all induced fields, although some of these effects may be quite small. Figure 2.11, adapted from Nye [2.25] and Cady [2.28], illustrates the interrelationship among first-order effects caused by applied and induced fields. Applied field variables appear at the vertices of the outer tetrahedron, while the corresponding vertices of the inner tetrahedron represent the conjugate induced field variables. Lines connecting the conjugate variables represent principal, or direct, effects. Specific Heat For a reversible change at constant volume, an incremental change in temperature dT produces a change of entropy dS: ε C (2.13) dT , dS = T
where C ε is the heat capacity at constant strain (volume) and T is the absolute temperature. To maintain constant volume during a change in temperature, it is necessary to vary the external tractions on the surface of the body (or the pressure, in the case of a gas). When measurements are made at constant stress (or pressure), the volume varies. The heat capacity under these conditions is C τ . Specific heat is an extensive, isotropic property.
τ H B
D E
ε
S T
Fig. 2.11 Relationships among applied and induced fields
Electrical Permittivity A change in electrical field dE produces a change in electrical displacement dD:
dDi = κij dE j ,
(2.14)
where the suffixes, which range from 1 to 3, represent the components of the vectors D and E, represented by bold symbols, along reference coordinate axes and summation of repeated suffixes over the range is implied here and subsequently. The second-rank tensor κ is the electrical permittivity, which is in general anisotropic. Magnetic Permeability A change in magnetic field dH produces a corresponding change in magnetic induction or flux density dB:
dBi = μij dH j ,
(2.15)
where μ is the second-rank magnetic permeability tensor, which is in general anisotropic. Equations (2.14) and (2.15) apply only to the components of D and B that are due to the applied electrical or magnetic field, respectively. Some substances possess residual electrical or magnetic moments at zero fields. The integral forms of (2.14) and (2.15) must account for these effects. Hookean Elasticity An incremental change in stress dτ produces a corresponding change in strain dε according to:
dεij = sijk dτk ,
(2.16)
where s is the elastic compliance tensor. In this case, the applied and induced fields are second-rank tensors, so the compliances form a fourth-rank tensor that exhibits the symmetry of the material. The elastic constant, or elastic stiffness, tensor c, is the inverse of s in the sense that cijmn smnkλ = 1/2(δik δ jλ + δiλ δ jk ). Equation (2.16) is Cauchy’s generalization of Hooke’s law for a general state of stress. A material that obeys (2.16) is an ideal Hookean elastic material. Most engineering calculations involving elastic behavior assume not only Hooke’s law but also isotropy of the elastic constants. This reduces the number of independent elastic constants to two, i. e. cijmn = λδij δmn + μ(δim δ jn + δin δ jm ), where λ and μ are the Lamé constants. Various combinations of these constants are also employed, such as Young’s modulus, the shear modulus, the bulk modulus and Poisson’s ratio, but only two are independent in an isotropic material. The Chapter on continuum mechanics in this work lists additional relationships among the isotropic elastic constants [2.29].
Materials Science for the Experimental Mechanist
Cross-Effects All conjugate fields can be included in the description of the thermodynamic state. Define a function Φ such that
Φ = U − τij εij − E D − Bk Hk − TS .
(2.17)
Then using the definition of work done on the system by reversible changes in the conjugate variables and the first and second laws of thermodynamics, we have dΦ = −εij dτij − D dE − Bk dHk − S dT . (2.18) Since Φ = Φ(τ, E, H, T), ∂Φ ∂Φ dτij + dE dΦ = ∂τij E,H,T ∂E τ,H,T ∂Φ ∂Φ + dHk + dT ∂Hk E,τ,T ∂T E,H,τ
the coefficients of the form 2 ∂εij ∂ Φ = − ∂τij ∂T E,H ∂T σ,E,H ∂S = = βijE,H ∂τij T,E,H
(2.22)
τ
ΔS = βij τij + (C /T )ΔT ,
(2.23)
where sT is the isothermal compliance tensor. Extension of this argument shows that the full matrix of matera)
Heat of deformation
Strain
Entropy
Elasticity
Heat capacity
(2.19)
Piezocaloric effect
Stress
it follows that ∂Φ = −εij , ∂τij E,H,T ∂Φ = −Bk , ∂Hk E,τ,T
∂Φ = −D , ∂E τ,H,T ∂Φ = −S . ∂T E,H,τ (2.20)
Further differentiation of (2.19) and (2.20) with respect to the independent variables gives relationships among
(2.21)
for the thermal expansion coefficient tensor β at constant electrical and magnetic field. Thermoelasticity illustrates cross-effects that occur among equilibrium properties. Consider the section of the tetrahedron containing only the applied field variables stress and temperature and the associated induced field variables, strain and entropy, illustrated in Fig. 2.12. In this illustration, the line connecting stress and strain represents the elastic relationships and the line connecting entropy and temperature denotes the heat capacity. The indirect, or cross-effects are the heat of deformation, the piezocaloric effect, thermal expansion, and thermal pressure, as shown in the figure. Ten independent variables specify the thermodynamic substate of the material. These can be the nine stress components and temperature, nine strain components and temperature, or either of the preceding with entropy replacing temperature. Specification of ten independent variables determines the ten dependent variables. Nye [2.25] shows that the relationships connecting the effects become: T τk + βij ΔT , εij = sijk
c s σ
Thermal expansion
Temperature
Thermal pressure
b)
f
ε α
S α
–f
37
Part A 2.2
While isotropy is a convenient approximation for mathematical calculations, all real materials exhibit elastic anisotropy. Single crystals of crystalline materials display symmetry of the elastic coefficients that reflects the symmetry of the crystal lattice at the microscale [2.25]. The single-crystal elastic constants are often expressed in a contracted notation in which the two suffixes of stress and strain components become a single suffix ranging from 1 to 6. The independent terms of the corresponding elastic constant tensor become a 6 × 6 array, which is not a tensor. This notation is convenient for performing engineering calculations, but when the elastic constants are not isotropic, changes in the components of the elastic constant matrix due to changes in the coordinate system of the problem must be calculated from the full, fourth-rank tensor description of the constants [2.25]. Anisotropic crystalline materials can display a lower elastic symmetry at the mesoscale than at the single-crystal scale due to preferred orientation of the crystallites introduced during processing.
2.2 Properties of Materials
T/C C/T T
Fig. 2.12a,b Equilibrium properties relevant to thermoelastic behavior: (a) quantity and (b) symbol
38
Part A
Solid Mechanics Topics
Part A 2.2
ial coefficients defined by relationships similar to (2.21) and written in the form of (2.22) is symmetric. The atomic basis for the linear relationships in (2.22) arises from the nature of the forces between atoms. Although the internal energy of a material is in reality a complex, many-body problem that is beyond the capabilities of even modern computers to solve, summation over all atoms of the bond energies of nearest-neighbor pairs offers a physically reasonable and computationally manageable alternative. The energy of an atom pair exhibits a long-range attraction and a short-range repulsion, resulting in a minimum energy for the pair at a distance equal to or somewhat greater than the interatomic spacing in the material. In the simplest case, a diatomic molecule of oppositely charged ions, the Coulomb force between unlike charges provides the attractive force and the mutual repulsion that arises when outer shells of electrons begin to overlap is the repulsive force. The minimum energy of the pair is called the dissociation energy, and is the energy required to separate the two ions to an infinite spacing at absolute zero. For the example cited the energy is radially symmetric, so that the energy–distance relationship is independent of the relative orientation of the ions, and the energy minimum occurs at the equilibrium interionic spacing. Figure 2.13 illustrates this behavior schematically. It follows from (2.16)–(2.20) that sijk = −
∂2Φ , ∂τij ∂τk
(2.24)
which can be expressed in terms of the strain relative to the equilibrium spacing by (2.16). Thus the elastic compliances are proportional to the curvature of the energy-distance curve of ionic pairs, measured at the equilibrium interionic distance. Extension of this model to condensed systems of atoms having more complex bonds leads to modification of the details of the relationships. The elastic constants of single crystals of single-phase cubic alloys can be estimated by an extension of this concept [2.30]. The energy–bond length relationship shown in Fig. 2.13 applies only at absolute zero. At finite temperatures, the energy of the pair is increased above the minimum by an amount proportional to kT . This implies that for any finite temperature T there exist two values of the interionic spacing with the same energy. The observed spacing at T is the average of these two. Most materials exhibit a curve that is asymmetric about r0 , the equilibrium spacing at T = 0 causing the mean spacing to change with temperature. Generally the na-
Lattice energy (eV) 15 12 9
Repulsive energy
6 3 0 –3 –6 Minimum energy
–9
Attractive energy
–12 –15
0
0.1
0.2
r0
0.4
0.5 0.6 0.7 0.8 Interionic spacing (nm)
Fig. 2.13 Energy–bond length relationship for an ionic
solid
ture of this asymmetry is such that the mean spacing increases with temperature, as illustrated in Fig. 2.13, leading to a positive coefficient of thermal expansion. Different values of the elastic compliances result from measurements under isothermal (ΔT = 0) or adiabatic (ΔS = 0) conditions. The adiabatic compliance tensor sS is determined by setting ΔS = 0 and solving for ΔT in the second of (2.22), eliminating ΔT from the first equation and defining sS as the resulting coefficients of σ. The relationships among the isothermal and adiabatic quantities are τ C S T − sijk = −βij βk (2.25) . sijk T Since the coefficients of the thermal expansion tensor are positive for most materials, adiabatic compliances are typically smaller than isothermal compliances. Nye [2.25] gives expressions such as (2.25) relating differences between various properties with different sets of applied field variables being constant. This reasoning emphasizes the fact that the definitions of these properties include specification of the measurement conditions.
2.2.3 Dissipative Properties Equilibrium processes are reversible and conservative, whereas nonequilibrium processes are irreversible and nonconservative. In the latter cases, work done on the system dissipates in the form of heat, generating entropy. This introduces history and rate dependence in the response of the system to external fields and influ-
Materials Science for the Experimental Mechanist
depends on the conditions of measurement. Engineering standards establish boundaries between these regimes that form the basis for design calculations. For example the limit of applicability of the equations of elasticity in engineering calculations can be defined as the stress at which strain no longer obeys Hooke’s law (proportional limit) or the more easily measured offset yield stress, defined as the stress required to produce some small but easily measurable permanent strain. The boundaries are always compromises between the accuracy with which they can be measured and the intended uses of the information. Viscoelasticity When stresses or strains are independent variables applied periodically with time, the response of the corresponding dependent variable is out of phase with the applied field. This causes a delay in response, manifested by an induced field that has the same frequency, but is out of phase with the applied field. Consider a uniaxial stress τ(t) = τ0 exp(iωt) applied with frequency ω that causes a strain ε(t) = ε0 exp[i(ωt − δ)]. The complex compliance S∗ is defined as
S∗ =
ε0 ε (t) = exp (−iδ) . τ (t) τ0
(2.26)
The storage compliance S is the real component of S∗ , and the loss compliance S
is the imaginary component. These are related to the loss angle, δ, by tan(δ) = S
/S . The complex stiffness or modulus is the reciprocal of S∗ . Applying this concept to other states of stress and strain permits determination of all components of the viscoelastic constant tensor. The complex elastic constants and the loss angle are functions of the frequency of the applied field as can be noted by analysis of the above example using the theory of damped oscillations. Consider an experiment in which the component of total strain, ε0 , in a particular direction remains constant while the corresponding stress component is measured on a plane normal to the same axis. Let instantaneous and relaxed values of stress be τ0 and τ∞ , respectively. The dependence of stress on time t has the form: τ (t) = τ∞ + (τ0 − τ∞ ) exp (−t/ξε ) ,
(2.27)
if a single relaxation mechanism dominates the process. Each mechanism of relaxation possesses a characteristic relaxation time, which is the mathematical manifestation of the physical process causing the delay in response of the induced field to the applied field. The
39
Part A 2.2
ences the phenomenological material coefficients that relate applied and induced fields. The definition of properties associated with dissipative processes is formally similar to that for equilibrium properties with the caveat that history dependence affects the properties and their values under various measurement conditions. The following sections employ mechanical properties to illustrate mathematical descriptions of dissipative processes and definitions of associated properties. While these illustrations are most germane to typical problems in experimental mechanics, the mathematical descriptions of phenomena are similar for other processes relating other pairs of conjugate variables. Naturally, the physical interpretation of associated properties will vary with the particular conjugate phenomena investigated. The idealized behavior described by (2.16), is nondissipative. Real materials typically exhibit a timedependent response of the dependent variable to the independent variable, which is generally expressed as a relationship between the time rate of change of the dependent variable and the independent variable. Since the dependent variable does not instantaneously assume its final value in response to changes in the independent variable, these are not in phase during a cyclic process, and energy is dissipated during a closed cycle of deformation. In a static experiment viscoelastic, or anelastic, behavior is characterized by an induced strain field that exhibits not only an instantaneous response to a constant applied stress field, but also continues to increase until it reaches its final, higher, value over a period of time. Similarly, the stress field induced in response to an applied strain field relaxes from an initial value to a lower, constant value after a sufficiently long time. This leads to the definition of relaxed and unrelaxed elastic coefficients in relations of the form of (2.16), depending on whether the instantaneous or final values of the induced variables are employed. Chapter 29 on the characterization of viscoelasticity materials presents a comprehensive treatment of the viscoelastic behavior of materials. Viscoplastic behavior occurs when the material does not return to its original state on the restoration of the initial boundary conditions. Classical continuum plasticity is the limiting case in which time-dependent behavior is sufficiently small to be neglected. Many comprehensive treatments of the mathematics and phenomenology of these models are available to the interested reader; see [2.24]. The transition from reversible, dissipative behavior to irreversible, dissipative behavior is difficult to establish unequivocally and
2.2 Properties of Materials
40
Part A
Solid Mechanics Topics
Part A 2.2
value of t for which (τ0 − τ∞ ) exp(−t/ξε ) reaches 1/ e of its final value defines the relaxation time at constant strain, ξε . The ratio of ε0 to τ(t) is the viscoelastic compliance S(t). Clearly, this ratio depends on time during the relaxation process. Relaxed and unrelaxed compliances S0 and S∞ follow from dividing ε0 by τ0 and τ∞ , respectively. Viscoelastic stiffnesses, relaxed and unrelaxed elastic stiffnesses, or moduli, are the reciprocals of the corresponding compliances. A similar experiment in which the applied stress is kept constant and the strain increases with time to a limiting value results in the definition of a relaxation time at constant stress ξσ which is generally different in magnitude from ξε . A single relaxation time for viscoelastic effects often refers to the geometric mean of relaxation times determined in experiments where stress and strain are, respectively, the independent variables. Zener develops the theory of superposition of a distribution of a spectrum of relaxation times to the description of material response [2.30]. While the example given applies to uniaxial normal stress and the resulting normal strain, the concept applies to other states of stress or strain to obtain components of the full elastic constant and compliance tensors. The physical phenomena that cause relaxation in a material depend on its atomic and molecular structure. For example, the individual molecular chains in a linear polymer do not respond instantaneously to an applied stress field because of their mutual interference with relative motion. Over time, thermal motion of the molecules assisted by the local stress overcomes interference and a configuration in equilibrium with the applied stress field results. Upon removal of the stress, the material relaxes towards its initial configuration. Depending on the magnitude of the deformation and the extent of mutual interference of molecules, it may not be possible for the material to achieve its original state. In this case, the residual deformation is permanent and the deformation is viscoplastic. The book by Ferry [2.31] gives more detail on the theory and data on the viscoelastic properties of polymers. Mechanisms for energy dissipation in polymeric materials occur at the scale of longchain molecules, while those in metals and ceramics occur at the scales of atoms and ions [2.30]. Consequently, relaxation times for polymers tend to be longer than for metals and ceramics, leading to higher damping capacities in the former materials. Damping phenomena are relatively more important to engineering applications of polymeric materials that of metals and ceramics.
Viscoplasticity A cyclic deformation process that does not return the material to its initial state, even after relaxation, produces permanent, or plastic, deformation. This occurs when processes in the material that respond to a change in independent variable, stress or strain, result in irreversible changes that prevent the material from assuming its initial state after restoration of the independent variable to its original value. The physical mechanisms responsible for irreversible behavior in materials are extensively studied and modeled at the microscale. The natures of all such mechanisms are such that time-dependent behavior results on a macroscale. Notwithstanding a reasonably detailed understanding of the microscopic processes involved in permanent deformation, the application of this knowledge to the description of behavior at the macroscale is one of the most challenging research areas in the mechanics of materials. Plasticity in amorphous materials involves permanent rearrangement of the linear molecular or network structure of the substance. The fundamental process of deformation is the stretching, distorting or breaking of individual atomic or molecular bonds and reforming them with different neighbors. A volume change may or may not accompany these processes. Changes typically occur in a manner that is correlated with the local stress state and often involve a combination of thermal activation with stress. Since amorphous structures do not possess long-range atomic or molecular order, it is not appropriate to describe this process in terms of the presence or propagation of structural defects. Permanent deformation of these materials is still best described in terms of phenomenological theories. Chapter 29 reviews some phenomenological approaches to viscoplasticity in which differences of behavior among materials are contained in material parameters appearing in the theories, but not specifically linked to atomic structure or mechanisms. This section presents a formally similar treatment, but introduces material parameters for crystalline materials that are based on the atomic and defect structure of the deforming material. Representative phenomenological approaches to viscoplasticity in which differences of behavior among materials are contained in material parameters appearing in the theories, but not specifically linked to atomic structure or mechanisms. As noted earlier, in crystalline materials permanent deformation at the microscale below half the absolute melting temperature occurs primarily by slip, the relative displacement of material across crystallographic
Materials Science for the Experimental Mechanist
shape coordinate system, embedded in the body, having nodes at material points and deforming congruently with the body as a whole. If no dislocations remain in the body after deformation, lattice coordinates and shape coordinates are related by a one-to-one mapping. While deformation of the shape coordinate system is always compatible (unless voids or cracks form during deformation), deformation of the lattice coordinate system is not compatible if dislocations remain in the body. Following the convention employed in Chap. 1, define a total, or shape, distortion as the deformation gradient FS which maps a reference vector in the initial state dX to its counterpart in the final state dx using shape coordinates. The lattice distortion FL , relates dx to its counterpart expressed in lattice coordinates dζ while the dislocation distortion FD relates dζ to dX [2.32]. Then dx = FL dζ = FL FD dX = FS dX, leading to the multiplicative decomposition FS = FL FD .
(2.28)
By the assumption of continuity FS is compatible, while FL and FD can be compatible or incompatible, depending on the nature of the deformation process. If either is incompatible, the other must be also and the incompatibilities must be equal and opposite. To facilitate understanding the connection between dislocation deformation and macroscale changes in shape, define a reference state consisting of a body free of external tractions and having a zero or selfequilibrating internal stress field. Consider the transition of a small volume of material δV bounded by a surface δS from the reference state to a deformed state by a two-step thought process [2.33, 34]: 1. remove δV from the reference material, replacing any tractions exerted by the rest of the body with tractions on the surface of δV so that its state remains unchanged, and give δV an arbitrary permanent change in shape δV ( dζ = FD dX), 2. replace δV in the original location of δV by applying the necessary tractions to its surface, δS , then remove the tractions, allowing δV to relax to its new, deformed configuration δV
bounded by δS
( dx = FL dζ). Two possibilities exist for step 1: dislocations may or may not be introduced into δV by the permanent change in shape. Each leads to a different situation in δV
after step 2. Case I refers to the situation where no dislocations are introduced in δV and FD is compatible within δV resulting in a stress-free distortion.
41
Part A 2.2
planes. Relative motion occurs such that the local structure of the material is preserved, that is, nearestneighbor distances are unchanged and the material remains crystalline. Motion does not occur simultaneously across an entire slip plane, but sequentially, so that the atomic distortion caused by the motion is localized near boundaries between regions where relative displacement has occurred and regions where it has yet to occur. These boundaries are dislocations, which are the principal source of internal stress in materials. For crystalline regions permanently deformed entirely by slip, dislocations pass out of the region and vanish at free surfaces or accumulate at internal surfaces that bound the region. Characterization of a dislocation requires specification of the slip vector, or Burgers vector b, which is the vector describing the relative displacement of material across the slip plane, and the line direction, a unit vector, t, tangent to the boundary, pointing in an arbitrarily chosen positive direction. Conventionally the senses of b and t are chosen such that the unit normal to the slip plane n = (b × t)/|b| points towards the region of lattice expansion associated with the dislocation. While motion of dislocations in their slip planes conserves lattice sites and produces no volume change, motion of dislocations normal to their slip planes, known as climb, creates or destroys vacant lattice sites, producing a permanent change in volume. Generally this nonconservative motion is associated with deformation at temperatures above one-half of the absolute melting point of the material, while conservative motion with no volume change dominates at lower temperatures. Permanent deformation by dislocation motion results in one of two final configurations. If dislocations pass entirely through the body, the shape is permanently changed, but no (additional) residual stress is introduced in the deformed material. In this case the total deformation is equal to the deformation due to dislocations, or dislocation deformation, both of which are compatible in the usual sense of finite deformation theory [2.24]. In the second case, dislocations remain in the material, causing additional deformation of the crystal lattice accompanied by residual stresses. Relating the latter scenario to conventional measures of deformation based on changes in the external dimensions of a body requires recognition of the fact that deformation of the crystal lattice may not be congruent with the deformation of the body as a whole. It is necessary to describe the process with reference to two coordinate systems: the lattice coordinate system, based on the crystal lattice in which dislocation deformation is measured, and the
2.2 Properties of Materials
42
Part A
Solid Mechanics Topics
Part A 2.2
Since a permanent change of shape has occurred, when δV is reintroduced into the body any misfit must be accommodated by dislocations distributed on δS
after relaxation. The resulting compatible FL within δV
is composed of a component due to these dislocations and a component due to surface tractions arising from the constraint of the rest of the body. This corresponds to Eshelby’s misfitting inclusion problem [2.33]. Case II refers to the situation where dislocations remain in δV
after step 1 and FD is not compatible. After reinsertion within δV
FL now consists of an incompatible distortion due to the dislocations within δV
in addition to the compatible distortion due to the boundary conditions on δS
. The implications of this decomposition become evident if δV
is considered as a representative volume element (RVE) or continuum limit for a continuum theory of plasticity. Including dislocations in δV
requires a decomposition of shape distortion in which both the dislocation and lattice components are incompatible. Figure 2.14 illustrates the relationships among the various components of deformation discussed above and the familiar elastic and plastic distortion components employed in continuum mechanics Chap. 1. Referring to the previous discussion of the decomposition of distortion, case I applies to the situation when the dislocation distortion coincides with the plastic distortion FP and the lattice distortion is entirely due to boundary conditions on δV
. Both distortions are compatible except on the boundary δS where dislocations have accumulated. Case II corresponds to the situation when dislocations that remain in δV cause an incompatible lattice distortion FLD that has an incompatibility equal and opposite to FD . The remaining compatible component of the lattice distortion FLC is Deformed state
Reference state FS Fp FD
FL
F LC = F e
F LD
Fig. 2.14 Decomposition of shape (total) distortion (after [2.35])
due to tractions on the boundary of δV and is formally equal to the conventional elastic distortion Fe . The multiplicative decompositions now become FS = FL FD = (FLC )(FLD FD ) = Fe Fp ,
(2.29)
where we have identified Fe , the conventional elastic distortion, with FLC and the conventional compatible plastic distortion Fp with the product FLD FD . Continuum plasticity employs the decomposition of total distortion into the two compatible distortion components on the extreme right-hand side (RHS) of (2.29), which does not permit the inclusion of dislocations explicitly in the theory and restricts its application to situations in which permanent distortion is uniform throughout the deformed region of material. Crystal plasticity modifies this model by invoking the geometry of crystalline slip to allow deformed regions of the material to experience differing amounts of distortion in response to the local stress field. By the arguments above the boundaries between these regions must contain dislocations sufficient to make the local shape distortion compatible, although the presence of these dislocations is not included explicitly in the theory. However, this approach often employs dislocation theory to construct constitutive relations at the microscale, which permits the local rate of distortion to differ throughout the material in response to the local state of stress [2.36]. For a viscoplastic material the rate of plastic distortion depends on the applied stress through a flow law of the form [2.37] ε˙ˆ ijD = Φ(σˆ ∗ , π1 · · · π K , Θ)σˆ ij∗ ,
(2.30)
in which the carat indicates the deviatoric component of the tensor Φ is a scalar function πi are internal material parameters dependent on structure and Θ is the absolute temperature. The effect of internal structure on mechanical behavior enters through its contribution to the viscoplastic potential Φ. The rate dependence of mechanical response originates with the resistance of the material to dislocation motion. Obstacles to dislocation motion are primarily the intrinsic resistance of the lattice (Peierls stress) and the stress fields of other defects and dislocations. Dislocations move over their slip planes by overcoming the resistance due to these obstacles under the influence of the local stress field and thermal activation, as illustrated schematically in Fig. 2.8. Observable deformation occurs by the collective motion of large numbers of dislocations over an obstacle array with a spectrum of strengths.
Materials Science for the Experimental Mechanist
The kinematics of deformation relate to dislocation motion through the geometry of the microscopic process. The dislocation distortion rate due to dislocation motion on N slip systems is ˙ D = LD = F
N
b(k) ⊗ (ρ(k) × v(k) ) ,
(2.31)
where the superposed dot refers to differentiation with respect to time. For the k-th slip system, ρ(k) is a vector whose length is a measure of the instantaneous length of mobile dislocations per unit volume having Burgers vector b(k) and whose direction is determined by the edge-screw character of the distribution of line directions, while v(k) is a vector normal to ρ(k) that specifies the mean velocity of the mobile dislocation configuration [2.35]. For typical deformation processes, the lattice distortion and lattice distortion rate are small compared to the dislocation distortion rate so that (2.31) is approximately equal to the total or shape distortion rate. Employing a single thermally activated deformation process due to a single dislocation mechanism, Hartley [2.35] demonstrated how the microscale parameters describing the process can lead to an interpretation of the viscoplastic potential in terms of parameters determined by the model of the dislocation–barrier interaction. Similar models can be constructed for creep, or high-temperature deformation under constant stress, where the primary mechanism of dislocation motion is climb, or motion normal to the glide plane. Constructing a model of this process that can be inserted into a continuum description of deformation includes several challenging components. First, models must be constructed of the interaction of individual dislocations with various obstacles at the scale of individual obstacles. These models must then be scaled up to include the interaction of a distribution of dislocations with a distribution of obstacles on a slip plane. The interaction of dislocation motion on the various slip planes in a crystal follows at the next scale, and finally the distribution of crystals and their associate slip planes throughout the material must be established. At each level, appropriate statistical models of the microscopic quantities must be constructed and related to the adjacent scales of structure. This process of multiscale modeling has received much attention in the past decade. Attempts to relate previous knowledge of dislocation theory and viscoplasticity have benefited considerable from advances in the computational speed and capacity of supercomputers. Present capabilities still fall short of permitting engineering properties
to be calculated from inputs based entirely on microscopic models of dislocation processes. Nevertheless, considerable progress has been made in this area and the inclusion of microscale models of deformation processes in engineering design codes promises to add a significant component of material design to the process in the future.
2.2.4 Transport Properties of Materials When a system is not in the same state throughout, gradients of free energy exist, causing fluxes of energy that tend to eliminate the gradients. The free energy gradients are thermodynamic forces and the resulting fluxes can include matter, energy or electric charge depending on the nature of the force. Although the description of the relationship between forces and fluxes is called irreversible thermodynamics [2.26], it is important to recognize that systems in which such forces occur are not in thermodynamic equilibrium [2.26]. Phenomenological equations similar to those defining equilibrium and dissipative properties define properties that relate forces and fluxes. Thermal Transport A difference in temperature between various parts of a system causes heat to flow. In this case, the thermodynamic force is the temperature gradient. A vector represents the heat flux. The magnitude of the vector is equal to the flux of heat flowing across unit area normal to the vector and the direction of the vector is the direction of heat flow. In general, the heat flux vector need not be parallel to the temperature gradient. The dependence of the heat flux on the temperature gradient defines the thermal conductivity, k, by the relationship
qi = −kij T j ,
(2.32)
where the suffix j refers to partial differentiation with respect to the spatial variable x j . The negative sign specifies that heat flows from regions of higher temperature to regions of lower temperature. The thermal resistivity tensor r is the inverse of k; both are symmetric second-rank tensors. Principal values of the conductivity tensor are positive for all known materials. The conductivity ellipsoid is the quadric surface [2.24] k () = kij i j
(2.33)
such that the thermal conductivity k() in the direction of the unit vector is the reciprocal of the square root
43
Part A 2.2
k=1
2.2 Properties of Materials
44
Part A
Solid Mechanics Topics
of the radius vector from the origin to the surface in the direction of . By Neumann’s principle, the symmetry elements of the conductivity tensor contain those of the point group of any crystalline material that they describe. Isotropic thermal conductivity tensors describe a material that is isotropic with respect to heat flow.
Part A 2.2
Electrical Charge Transport The treatment of electrical conductivity in anisotropic materials is formally identical to that for thermal conductivity. In the former case, the flux is electrical charge instead of heat and the corresponding force is the gradient of electrical potential ϕ I = −E i . The expression
ji = −σik ϕk = σik E k
(2.34)
defines the electrical conductivity tensor σ in terms of the current density j and E. Equation (2.34) is Ohm’s law for a material exhibiting general anisotropy with respect to electrical conductivity. The electrical resistivity tensor ρ is the inverse of σ. All comments in the previous section about the symmetry properties and representation of the thermal conductivity and resistivity tensors apply to the corresponding tensors of electrical properties. The preceding discussion describes the conduction of heat and electrical charge as independent processes. However, when both occur together, they are coupled in a fashion similar to that describing equilibrium properties. For a description of the phenomenon of thermoelectricity and the associated material properties, the interested reader can consult [2.25, Chap. 12]. Mass Transport Engineering materials produced by ordinary manufacturing processes are never in their equilibrium state. A typical example is the segregation of components in an alloy prepared by solidification from the liquid state. The segregation is due to nonuniform cooling and compositional differences between the liquid and the first solids that form on solidification. It is generally desirable to eliminate this segregation to form a material with more uniform properties than the as-cast structure exhibits. This modification is possible because of the tendency of the material to remove spatial variations in composition under appropriate conditions by diffusion, a solid-state mass transport process. Two types of diffusion occur in materials. Stochastic, or random, diffusion occurs because of the random thermal motion of atoms or molecules in a substance. In the absence of any force biasing the random motion, the mean position of the diffusing entity will not change
with time. However, its root-mean-square (RMS) displacement from its origin will not vanish. This means that at any instant t after measurement begins, the displacement of the entity from its starting point may not be zero. In three dimensions, the RMS displacement u(t) is √ u(t) = 6Dt , (2.35) where D is the diffusion coefficient for the diffusing species. The diffusion coefficient depends strongly on temperature and the mechanism by which the diffusing entity moves through the material. Elementary arguments based on a model of diffusion as a thermally activated process lead to the expression of the Arrhenius form for the diffusion coefficient [2.38] −ΔH ∗ (2.36) , D = D0 exp kT where ΔH ∗ is the enthalpy of activation and D0 is a factor containing the square of the distance moved in a single jump of the diffusing entity, the frequency of jumps, a geometric factor, and a term related to the entropy of activation. Self-diffusion is synonymous with stochastic diffusion. Thermodynamic forces existing in materials bias stochastic diffusion, causing chemical diffusion, a net flux of matter that tends to eliminate gradients in the chemical potential of each component. For the purpose of describing diffusion, the chemical potential μ(i) of component i in a system is the partial derivative of the Gibbs free energy of the system with respect to the number of atoms or molecules of component i present, holding constant the temperature, stress state, and number of atoms of all other components. Multicomponent systems can exhibit fluxes of each component due to gradients in the chemical potentials of all components. In chemical diffusion, the force conjugate to the flux of each component is the gradient of the chemical potential of that component. Gradients of other fields, such as temperature and electrical potential, can also cause fluxes of the components. The description of diffusion including these cross effects is formally similar to that for thermoelectricity, giving rise to the definition of the thermal diffusion coefficient, electrostatic diffusion coefficient, and related properties. The following section presents a brief treatment of the principal equations and concepts in chemical diffusion in a two-component system. Consider a binary system of components A and B in which equal and opposite fluxes of the components J (K ) , where K takes on the values A and B, occur
Materials Science for the Experimental Mechanist
parallel to a characteristic direction xi . Fick’s first law assumes that the flux of each component is proportional to the concentration gradient and occurs in the opposite direction Ji(A) = − D˜
∂NA , ∂xi
(2.37)
Property Change Through Heat Treatment One of the most useful features of many structural materials, particularly metals and alloys, is the ability to alter the microstructure so that selected physical and mechanical properties can be significantly changed without substantially affecting the external shape. This change is usually accomplished through heat treatment, which is the exposure of a material to an elevated temperature, generally somewhere between the proposed service temperature and the melting point of the material and often in a protective atmosphere to prevent adverse interaction with the environment. The extent of the exposure must be determined empirically to effect desired changes of properties without undesirable side effects. During the exposure internal stresses may be relieved by
the nucleation and growth of new, stress-free grains (recrystallization), preceded by the mutual annihilation of pre-existing dislocations (recovery); metastable phases present may transform to more stable forms and compositional variations at the microscale can be diminished by interdiffusion of components of the material. The three examples below illustrate such changes. Many structural metals and alloys are prepared for use by a sequence of processes beginning with the solidification of an ingot from a molten source, followed by several stages of substantial permanent deformation, often alternated with heat treatments, to arrive at a final form suitable for the fabrication of engineering structures. The deformation generally begins at elevated temperatures (above 0.5Tm , where Tm is the absolute melting temperature) where the deformation can be accomplished at lower loads. This process also breaks up the grain structure of the cast ingot, which is highly anisotropic. The elevated temperatures at which deformation is conducted promote mass transport of alloying elements, which promotes compositional homogeneity by diminishing local variations in the material. Since interaction with the environment, resulting in undesirable consequences such as surface roughness, accompanies deformation at elevated temperatures, final processing occurs at near-ambient temperatures. This low-temperature deformation introduces work-hardening, which may occur to such an extent that additional processing is not possible without damage to the material. In such cases, intermediate heat treatments that cause recovery and recrystallization in the material provide a means for lowering the flow stress to a point where additional cold work can be accomplished without fracture of the material. Changes in the internal structure of materials by altering the number, amount, and composition of phases present is a common result of heat treatment. Both the hardening of steel and precipitation hardening of aluminum alloys are examples of this process. The hardening of steel results from the fact that iron undergoes a transformation of crystal structure from body-centered cubic to face-centered cubic on heating from ambient temperature to above 910 ◦ C. When carbon is added, the bcc form of iron, ferrite, has a lower solubility limit than the fcc form, austenite. Thus an alloy that may be single phase at an elevated temperature will tend to become two-phase at ambient temperature as the structure transforms from austenite to ferrite. If the alloy is cooled slowly through the transforma-
45
Part A 2.2
where NA is the atomic fraction of component A, and D˜ is the coefficient of chemical diffusion, also known as the interdiffusion coefficient. The interdiffusion coefficient contains the thermodynamic factor relating the concentration to the chemical potential of component A. In many systems, experiments show that the fluxes of two species are not equal and opposite due to the accompanying flux of the point defects responsible for diffusion at the nanoscale. Although the gradient in defect concentration is generally negligible relative to that of the other diffusing species, the defect flux can be similar in magnitude to the fluxes of the other diffusing species. The phenomenological treatment of this effect describes the flux of each component in terms of a relation similar to (2.37) with the interdiffusion coefficient replaced by an intrinsic diffusion coefficient D(K) which contains the thermodynamic factor relating the chemical potential to the concentration of component K. Neglecting the defect concentration relative to those of the atomic or molecular species requires that N (A) + N (B) = 1, and the gradients are equal and opposite. Then (2.32) describes the flux of either species with the interdiffusion coefficient replaced by (N (A) D(B) + N (B) D(A) ). For additional information on experimental and theoretical treatment of this topic, the interested reader can consult the excellent book by Glicksman [2.38].
2.2 Properties of Materials
46
Part A
Solid Mechanics Topics
Part A 2.2
tion temperature range, this occurs by the formation of a second phase, Fe3 C or cementite, which appears in the form of an eutectoid, pearlite, consisting of alternating lamellae of cementite and ferrite. However if the alloy is cooled rapidly (quenched) from the higher temperature, the precipitation has insufficient time to occur and the excess carbon is trapped in the bcc lattice, distorting it to form a metastable, bodycentered tetragonal structure (martensite). Martensite is considerably harder than ferrite or pearlite, so the resulting alloy has substantially higher yield strength that a material of identical composition that has been slowly cooled from the same elevated temperature. Since martensite is often too brittle for use in the as-quenched condition, subsequent heat treatments below the transformation temperature can further alter the structure and increase toughness by reducing internal stresses without significantly affecting the yield strength. Precipitation hardening has similarities to the heat treatment of steel, but does not require a phase change of the pure element that is the base of the alloy system. This process is most commonly employed to strengthen aluminum alloys. The effect exploits the fact that the solubility of most alloying elements in a metal increases with increasing temperature. Thus, in the appropriate range of composition, an alloy that is single phase at an elevated temperature may have an equilibrium structure consisting of two or more phases at ambient temperature. Heat treatment to cause precipitation hardening consists of heating such an alloy to a temperature in the single-phase region, followed by quenching to ambient temperature to retain the singlephase structure, then reheating to a lower temperature in the multiphase region and holding for an empirically determined time (aging) to permit the structure to approach the equilibrium phase structure. In the early stage of aging metastable proto-precipitates are formed, which strain the lattice of the matrix material and increase the yield stress. As aging progresses and precipitates grow from these nuclei, internal stresses diminish, causing the yield stress to decrease, approaching the value of the as-quenched, single-phase solid solution. Processing of these materials is designed to conduct the aging treatment at temperatures and times that optimize the combination of strength, ductility, and toughness required for intended applications. Service temperatures for precipitation hardened alloys must be sufficiently below the aging temperatures so that additional unintended changes in properties do not occur during use.
2.2.5 Measurement Principles for Material Properties The measured properties of materials and the use of these measurements in various experimental mechanics applications require an appreciation of the limitations and dependencies described in the previous sections. The physical foundations of phenomenological relationships connecting structure and properties of materials comprise the preceding sections of this chapter. This connection leads to the following general principles, which call attention to the need for appropriate qualification of experimental measurements involving the properties of materials. Isolation In conducting experiments where measurements of conjugate fields provide data for the calculation of material properties, either isolate the system from additional fields that can affect the results or hold all but the conjugate fields constant. Without isolation or a constant environment of other fields, the measured properties will include cross-effects giving an incorrect value for the property associated with the conjugate fields. The same principle applies when specifically measuring cross-effects. Structure Consistency When measuring a material property or using the value of a material property in a measurement, ensure that samples to which the property applies are structurally identical. This is especially true of structure-sensitive properties, such as yield strength. However, variations in microstructure due to varying conditions of preparation can also affect other properties, such as electrical resistivity, sufficiently to cause inconsistencies in measurements with different samples. Quantitative Specification of Structure When measuring a material property or employing a material as an element in a measurement system, describe the composition and microstructural condition of the material in sufficient quantitative detail that subsequent similar experiments can employ structurally comparable material. Failure to observe this principle will introduce an unaccountable element of variability in the results of apparently comparable experiments. Consistency of Assumptions In analyzing results of measurements involving materials, ensure that the conditions of measurement
Materials Science for the Experimental Mechanist
satisfy the assumptions employed in the calculation. For example, the calculation of internal stress from measured values of strain must employ lattice strain or acknowledge the fact that the use of measured values of total strain implicitly assume that no plastic deforma-
References
tion occurs during the measurements. Only diffraction techniques measure lattice strain. Other techniques that use surface strains must satisfy the conditions under which these strains equal lattice strains, i. e., negligible dislocation motion.
2.2 2.3 2.4
2.5 2.6 2.7
2.8
2.9
2.10
2.11
2.12 2.13 2.14 2.15
2.16
2.17
J.F. Shackelford: Introduction to Materials Science for Engineers, 6th edn. (Pearson-Prentice Hall, New York 2004) D.W. Callister: Materials Science and Engineering An Introduction, 6th edn. (Wiley, New York 2003) D.R. Askeland: The Science and Engineering of Materials, 2nd edn. (Thomson, Stanford 1992) M.F. Ashby, D.R. Jones: Engineering Materials 1: An Introduction to Their Properties and Applications, 2nd edn. (Butterworth Heinemann, Oxford 2000) J.P. Hirth, J. Lothe: Theory of Dislocations, 2nd edn. (Wiley, New York 1982) F.R.N. Nabarro, J.P. Hirth (Eds.): Dislocations in Solids, Vol. 12 (Elsevier, Amsterdam 2004) C.S. Barrett, W.D. Nix, A. Tetleman: Principles of Engineering Materials (Prentice-Hall, Englewood Cliffs 1973) T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak: Binary Alloy Phase Diagrams, 2nd edn. (ASM Int., Materials Park 1990) R.S. Roth, T. Negas, L.P. Cook: Phase Diagrams for Ceramists, Vol. 5 (American Ceramic Society, Inc., 1983) P. Villers, A. Prince, H. Okamoto: Handbook of Ternary Alloy Phase Diagrams (ASM Int., Materials Park 1995) J. Goldstein, D.E. Newbury, P. Echlin, D.C. Joy, A.D. Romig Jr., C.E. Lyman, C. Fiori, E. Lifshin: Scanning Electron Microscopy and X-Ray Microanalysis, 2nd edn. (Springer, New York 1992) R.T. DeHoff, F.N. Rhines: Quantitative Microscopy (McGraw-Hill, New York 1968) B.D. Cullity: Elements of X-ray Diffraction, 2nd edn. (Addison-Wesley, Reading 1978) B.E. Warren: X-ray Diffraction (General, New York 1990) D.K. Smith, R. Jenkins: The powder diffraction file: Past, present and future, Rigaku J. 6(2), 3–14 (1989) W.I.F. David, K. Shankland, L.B. McCusker, C. Baerlocher (Eds.): Structure Determination from Powder Diffraction Data, International Union of Crystallography (Oxford Univ. Press, New York 2002) I.C. Noyan, J.B. Cohen, B. Ilschner, N.J. Grant: Residual Stress Measurement by Diffraction and Interpretation (Springer, New York 1989)
2.18 2.19
2.20
2.21
2.22
2.23
2.24
2.25 2.26 2.27 2.28
2.29 2.30 2.31 2.32 2.33 2.34
2.35
C.S. Hartley: International Conference on Experimental Mechanics, ICEM12-12th (Italy 2004) D.K. Bowen, B.K. Tanner: High Resolution X-ray Diffractometry and Topography (Taylor Francis, New York 1998) L. Cartz: Nondestructive Testing Radiography, Ultrasonics, Liquid Penetrant, Magnetic Particle, Eddy Current (ASM Int., Materials Park 1995) D.B. Williams, C.B. Carter: Transmission electron microscopy: a textbook for materials science (Kluwer Academic, New York, 1996) B.L. Adams, S.I. Wright, K. Kunze: Orientation imaging: The emergence of a new microscopy, Met. Mat. Trans. A 24, 819–831 (1993) J.A. James, J.R. Santistban, L. Edwards, M.R. Daymond: A virtual laboratory for neutron and synchrotron strain scanning, Physica B 350(1–3), 743–746 (2004) L.E. Malvern: Introduction to the Mechanics of a Continuous Medium (Prentice-Hall, Englewood Cliffs 1969) J.F. Nye: Physical Properties of Crystals (Clarendon, Oxford 1985) S.M. DeGroot: Thermodynamics of Irreversible Processes (North-Holland, Amsterdam 1951) M.P. Marder: Condensed Matter Physics (Wiley, New York 2000) W.G. Cady: Piezoelectricity: An Introduction to the Theory and Applications of Electromechanical Phenomena in Crystals (Dover, New York 1964) C.S. Hartley: Single crystal elastic moduli of disordered cubic alloys, Acta Mater. 51, 1373–1391 (2003) C. Zener: Elasticity and Anelasticity of Metals (Univ. Chicago Press, Chicago 1948) J.D. Ferry: Viscoelastic Properties of Polymers, 3rd edn. (Wiley, New York 1980) B. A. Bilby: Continuous Distributions of Dislocations, Progress in Solid Mechanics (1960) J.D. Eshelby: The continuum theory of lattice defects, Solid State Phys. 3, 79–144 (1956) E. Kröner: Continuum theory of defects. In: Les Houches, Session XXXV, 1980 – Physics of Defects, ed. by R. Balian, M. Kleman, J.-P. Poirer (NorthHolland, Amsterdam 1981) pp. 282–315 C.S. Hartley: A method for linking thermally activated dislocation mechanisms of yielding with
Part A 2
References 2.1
47
48
Part A
Solid Mechanics Topics
2.36
continuum plasticity theory, Philos. Mag. 83, 3783– 3808 (2003) R. Asaro: Crystal Plasticity, J. Appl. Mech. 50, 921–934 (1983)
2.37 2.38
J. Lubliner: Plasticity Theory (Macmillan, New York 1990) M.E. Glicksman: Diffusion in Solids (Wiley, New York 2000)
Part A 2
49
Mechanics of 3. Mechanics of Polymers: Viscoelasticity
Wolfgang G. Knauss, Igor Emri, Hongbing Lu
3.1
3.2
Historical Background ........................... 3.1.1 The Building Blocks of the Theory of Viscoelasticity ..........................
49
Linear Viscoelasticity ............................. 3.2.1 A Simple Linear Concept: Response to a Step-Function Input .............. 3.2.2 Specific Constitutive Responses (Isotropic Solids) .......................... 3.2.3 Mathematical Representation of the Relaxation and Creep Functions 3.2.4 General Constitutive Law for Linear and Isotropic Solid: Poisson Effect .. 3.2.5 Spectral and Functional Representations ...........................
51
3.2.6 Special Stress or Strain Histories Related to Material Characterization 3.2.7 Dissipation Under Cyclical Deformation............ 3.2.8 Temperature Effects ...................... 3.2.9 The Effect of Pressure on Viscoelastic Behavior of Rubbery Solids ......................... 3.2.10 The Effect of Moisture and Solvents on Viscoelastic Behavior................ 3.3
3.4
50
51
Measurements and Methods .................. 3.3.1 Laboratory Concerns ..................... 3.3.2 Volumetric (Bulk) Response ........... 3.3.3 The CEM Measuring System ............ 3.3.4 Nano/Microindentation for Measurements of Viscoelastic Properties of Small Amounts of Material......... 3.3.5 Photoviscoelasticity ...................... Nonlinearly Viscoelastic Material Characterization ................................... 3.4.1 Visual Assessment of Nonlinear Behavior................... 3.4.2 Characterization of Nonlinearly Viscoelastic Behavior Under Biaxial Stress States ............
56 63 63
68 69 69 70 71 74
76 83 84 84
85
53
3.5
Closing Remarks ...................................
89
53 55
3.6 Recognizing Viscoelastic Solutions if the Elastic Solution is Known.............. 3.6.1 Further Reading ...........................
90 90
55
References ..................................................
92
3.1 Historical Background During the past five decades the use of polymers has seen a tremendous rise in engineering applications. This growing acceptance of a variety of polymer-based de-
signs derives in part from the ease with which these materials can be formed into virtually any shape, and in part because of their generally excellent performance
Part A 3
With the heavy influx of polymers into engineering designs their special, deformation-rate-sensitive properties require particular attention. Although we often refer to them as time-dependent materials, their properties really do not depend on time, but time histories factor prominently in the responses of polymeric components or structures. Structural responses involving time-dependent materials cannot be assessed by simply substituting time-dependent modulus functions for their elastic counterparts. The outline provided here is intended to provide guidance to the experimentally inclined researcher who is not thoroughly familiar with how these materials behave, but needs to be aware of these materials because laboratory life and applications today invariably involve their use.
50
Part A
Solid Mechanics Topics
Part A 3.1
in otherwise normally corrosive environments. This recent emergence is driven by our evolving capabilities during the last seven decades to synthesize polymers in great variety and to address their processing into useful shapes. Historically polymers have played a significant role in human developments, as illustrated by the introductory comments in [3.1]. Of great consequence for the survival or dominance of tribes or nations was the development of animal-derived adhesives for the construction of high-performance bows, starting with the American Indian of the Northwest through the developments by the Tartars and leading to the extraordinary military exploits of the Turks in the latter Middle Ages [3.2]. In principle, these very old methods of producing weaponry continue to aid today in the construction of modern aerospace structures. While the current technology still uses principles exploited by our ancestors many years ago, the advent of the synthetic polymers has provided a plethora of properties available for a vast range of different engineering designs. This range of properties is, indeed, so large that empirical methods are no longer sufficient to effect reliable engineering developments but must now be supported by optimum analytical methods to aid in the design process. One characteristic of polymers is their relative sensitivity to load exposure for extended periods of time or to the rate of deformations imposed on them. This behavior is usually and widely combined under the concept of viscoelastic behavior, though it is sometimes characterized as representing fading memory of the material. These time-sensitive characteristics typically extend over many decades of the time scale and characteristically set polymers apart from the normal engineering metals. While the strain-rate sensitivity [3.3] and the time dependence of failure in metals [3.4] are recognized and creep as well as creep rupture [3.5–10] of metals is well documented, one finds that the incorporation of rate-dependent material properties into models of time-dependent crack growth – other than fatigue of intrinsically rate-insensitive materials – still stands on a relatively weak foundation. Metallic glasses (i.e., amorphous metals) are relatively newcomers to the pool of engineering materials. Their physical properties are at the beginning of exploration, but it is already becoming clear through initial studies [3.11, 12] that their amorphous structure endows them with properties many of which closely resemble those of amorphous polymers. While these developments are essentially in their infancy at this time it is
well to bear in mind that certain parts of the following exposition are also applicable to these materials. Because the emphasis in this volume is placed on experimental methods, rather than on stress analysis methods, only a cursory review of the linearized theory of viscoelasticity is included. For the reader’s educational benefit a number of books and papers have been listed in the Further Reading section, which can serve as resources for a more in-depth treatment. This review of material description and analysis is thus guided by particular deformation histories as a background for measurements addressing material characterization to be used in engineering design applications. Although the nonlinearly viscoelastic characteristic of these materials are not well understood in a general, three-dimensional setting, we include some reference to these characteristics in the hope that this understanding will assist the experimentalist with properly interpreting laboratory measurements.
3.1.1 The Building Blocks of the Theory of Viscoelasticity Forces are subject to the laws of Newtonian mechanics, and are, accordingly, governed by the classical laws of motion. While relativistic effects have been studied in connection with deforming solids, such concerns are suppressed in the present context. Many texts deal with Newtonian mechanics to various degrees of sophistication so that only a statement of the necessary terminology is required for the present purposes. In the interest of brevity we thus dispense with a detailed presentation of the analysis of stress and of the analysis of strain, except for summarizing notational conventions and defining certain variables commonly understood in the context of the linear theory of elasticity. We adhere to the common notation of the Greek letters τ and ε denoting stress and strain, respectively. Repeated indices on components imply summation; identical subscripts (e.g., τ11 ) denote normal components and different ones shear (e.g., τ12 ). The dilatational components of stress, τii , are often written as σkk , with the strain complement being εkk . Because the viscoelastic constitutive description is readily expressed in terms of deviatoric and dilatational components, it is necessary to recall the components Sij of the deviatoric stress as 1 Sij = τij − τkk · δij , 3
(3.1)
where δij denotes the Kronecker operator. Similarly, the corresponding deviatoric strain e is written in compo-
Mechanics of Polymers: Viscoelasticity
nent form as 1 eij = εij − εkk · δij . (3.2) 3 For further definitions and derivations of measures of stress or strain the reader is referred to typical texts.
3.2 Linear Viscoelasticity
51
The remaining building block of the theory consists of the constitutive behavior, which differentiates viscoelastic materials from elastic ones. The next section is devoted to a brief definition of linearly viscoelastic material behavior.
3.2 Linear Viscoelasticity face (boundary) of a viscoelastic solid. Specification of such a quantity under uniaxial relaxation is not particularly useful, except to note that in the limit of short (glassy) response its value is a limit constant, and also under long-term conditions when the equilibrium (or rubbery) modulus is effective, in which case the Poisson’s ratio is very close to 0.5 (incompressibility).
3.2.1 A Simple Linear Concept: Response to a Step-Function Input It is convenient for instructional purposes to consider that the stress can be described, so that the strain follows from the stress. The reverse may hold with equal validity. In general, of course, neither may be prescribed a priori, and a general connection relates them. The structure of the linear theory must be completely symmetric in the sense that the mathematical formulation applies to these relations regardless of which variable is considered the prescribed or the derived one. For introductory purposes we shall use, therefore, the concept of a cause c(t) (input) and an effect e(t) (output) that are connected by a functional relationship. The latter must be linear with respect to (a) the amplitude (additivity with respect to magnitude) and (b) time in the sense that they obey additivity independent of time. It is primarily a matter of convenience that the cause-and-effect relation is typically expressed with the aid of a step-function cause. Other representations are
Table 3.1 Nomenclature for viscoelastic material functions Type of loading Shear
Bulk
Uniaxial extension
μ(t) J(t) μ (ω) μ (ω) J (ω) J (ω)
K (t) M(t) K (ω) K (ω) M (ω) M (ω)
E(t) D(t) E (ω) E (ω) D (ω) D (ω)
Mode Quasistatic
Relaxation Creep Strain prescribed
Harmonic Stress prescribed
Storage Loss Storage Loss
Part A 3.2
The framework for describing linearly viscoelastic material behavior, as used effectively for engineering applications, is phenomenological. It is based mathematically on either an integral or differential formulation with the material representation described realistically in numerical (tabular) or functional form(s). The fundamental equations governing the linearized theory of viscoelasticity are the same as those for the linearized theory of elasticity, except that the generalized Hooke’s law of elasticity is replaced by a constitutive description that is sensitive to the material’s (past) history of loading or deformation. It will be the purpose of the immediately subsequent subsections to summarize this formalism of material description in preparation for various forms of material characterization. Little or no reference is made to general solution methods for viscoelastic boundary value problems. For this purpose the reader is referred to the few texts available as listed in Sect. 3.6.1. Rather than repeating the theory as already outlined closely in [3.13] we summarize below the concepts and equations most necessary for experimental work; if necessary, the reader may consult the initially cited reference(s) (Sect. 3.6.1) for a more expansive treatment. In brief, the viscoelastic material functions of first-order interest are given in Table 3.1. Note the absence of a generic viscoelastic Poisson function, because that particular response is a functional of the deformation or stress history applied to the sur-
52
Part A
Solid Mechanics Topics
Part A 3.2
feasible and we shall address a common one (steadystate harmonic) later on as a special case. For now, let E(t, t1 ) represent a time-dependent effect that results from a step cause c(t1 ) = h(t1 ) of unit amplitude imposed at time t1 ; h(t1 ) denotes the Heaviside step function applied at time t1 . For the present we are concerned only with nonaging materials, i. e. with materials, the intrinsic properties of which do not change with time. (With this definition in mind it is clear that the nomenclature timedependent materials in place of viscoelastic materials is really a misnomer; but that terminology is widely used, nevertheless.) We can assert then that for a non-aging material any linearity of operation, or relation between an effect and its cause, requires satisfaction of Postulate (a): proportionality with respect to amplitude, and Postulate (b): additivity of effects independent of the time sequence, when the corresponding causes are added, regardless of the respective application times. Condition (a) states that, if the cause c(0) elicits E(t, 0), then a cause of different amplitude, say c1 (0) ≡ α · h(0), with α a constant, elicits a response α · E(t, 0). Under the non-aging restriction this relation is to be independent of the time when the cause starts to act, so that c1 (t1 ) ≡ α · h(t1 ) → αE(t, t1 ); t > t1 also holds. This means simply that the response–effect relation shown in the upper part of Fig. 3.1 holds also for a different time t2 , which occurs later in time than t1 .
Condition (b) entails then that, if two causes c1 (t1 ) ≡ α1 · h(t1 ) and c2 (t2 ) ≡ α2 · h(t2 ), imposed at different times t1 and, t2 act jointly, then their corresponding effects α1 · E(t, t1 ) and α2 · E(t, t2 ) is their sum while observing their proper time sequence. Let the common time scale start at t = 0; then the combined effect, say e(t), is expressed by c(t) ≡ c1 (t1 ) + c2 (t2 ) → e(t) = α1 · E(t − t1 ) + α1 · E(t − t2 ) . (3.3)
Specifically, here the first response does not start until the time t1 is reached, and the response due to the second cause is not experienced until time t2 , as illustrated in Fig. 3.1. Having established the addition process for two causes and their responses, the extension to an arbitrary number of discrete step causes is clearly recognized as a corresponding sum for the collective effects e(tn ), up to time t, in the generalized form of (3.3), namely (3.4) e(t) = αn E(t − tn ) ; (tn < t) . This result may be further generalized for causes represented by a continuous cause function of time, say c(t). To this end consider a continuously varying function c(t) decomposed into an initially discrete approximation of steps of finite (small) amplitudes. With the intent of ultimately proceeding to the limit of infinitesimal steps, note that the amplitude of an individual step amplitude at, say, time τn is given by (3.5) αn → Δc(τn ) = (Δc/Δτ) Δτ , τn
Stress
which, when substituted into (3.4), leads to e(t) = E(t − tn )(Δc/Δτ) Δτ .
Strain
τn
t1
Time
Stress
t1
Time
Strain
In the limit n → ∞ (Δτ → dτ), the sum Δc e(t) = lim E(t − tn ) Δτ , Δτ τn
(3.7)
passes over into the integral 2
t
2 1
(3.6)
e(t) =
1
E(t − τ)
dc(τ) dτ . dτ
(3.8)
0
t1
t2
Time
t1
t2
Time
Fig. 3.1 Additivity of prescribed stress steps and corres-
ponding addition of responses
Inasmuch as this expression can contain the effect of a step-function contribution at zero time of magnitude c(0), this fact can be expressed explicitly through the
Mechanics of Polymers: Viscoelasticity
alternate notation
3.2 Linear Viscoelasticity
53
effect, one obtains the inverse relation(s) t
e(t) = c(0)E(t) +
E(t − τ)
0+
dc(τ) dτ , dτ
(3.9)
3.2.2 Specific Constitutive Responses (Isotropic Solids) For illustrative purposes and to keep the discussion within limits, the following considerations are limited to isotropic materials. Recalling that the stress and strain states may be decomposed into shear and dilatational contributions (deviatoric and dilatational components), we deal first with the shear response followed by the volumetric part. Thermal characterization will then be dealt with subsequently. Shear Response Let τ denote any shear stress component and ε its corresponding shear strain. Consider ε to be the cause and τ its effect. Denote the material characteristic E(t) for unit step excitation from Sect. 3.2.1 in the present shear context by μ(t). This function will be henceforth identified as the relaxation modulus in shear (for an isotropic material). It follows then from (3.8) and (3.9) that t dε(ξ) (3.10) dξ τ(t) = 2 μ(t − ξ) dξ 0
t = 2ε(0)μ(t) + 2 0+
μ(t − ξ)
dε(ξ) dξ . dξ
(3.11)
The factor of 2 in the shear response is consistent with elasticity theory, inasmuch as in the limits of short- and long-term behavior all viscoelasticity relations must revert to the elastic counterparts. If one interchanges the cause and effect by letting the shear stress represent the cause, and the strain the
t J(t − ξ)
dτ dξ dξ
(3.12)
0
t
1 1 = τ(0)J(t) + 2 2
J(t − ξ) 0+
dτ dξ , dξ
(3.13)
where now the function E ≡ J(t) is called the shear creep compliance, which represents the creep response of the material in shear under application of a step shear stress of unit magnitude as the cause. Bulk or Dilatation Response Let εii (t) represent the first strain invariant and σ jj (t) the corresponding stress invariant. The latter is recognized as three times the pressure P(t), i. e., σ jj (t) ≡ 3P(t). In completely analogous fashion to (3.12) and (3.13) the bulk behavior, governed by the bulk relaxation modulus K (t) ≡ E(t), is represented by
t σ jj = 3
K (t − ξ)
dεii (ξ) dξ dξ
(3.14)
0
t = 3εii (0)K (t) + 3
K (t − ξ)
0+
dεii (ξ) dξii . dξ (3.15)
Similarly, one writes the inverse relation as 1 εii = 3
t M(t − ξ)
dσ jj (ξ) dξ dξ
(3.16)
0
1 1 = σ jj (0)M(t) + 3 3
t M(t − ξ) 0+
dσ jj (ξ) dξii , dξ (3.17)
where the function M(t) ≡ E(t) represents now the dilatational creep compliance (or bulk creep compliance); in physical terms, this is the time-dependent fractional volume change resulting from the imposition of a unit step pressure.
3.2.3 Mathematical Representation of the Relaxation and Creep Functions Various mathematical forms have been suggested and used to represent the material property functions
Part A 3.2
where the lower integral limit 0+ merely indicates that the integration starts at infinitesimally positive time so as to exclude the discontinuity at zero. Alternatively, the same result follows from observing that for a step discontinuity in c(t) the derivative in (3.5) is represented by the Dirac delta function δ(t). In fact, this latter remark holds for any jump discontinuity in c(t) at any time, after and including any at t = 0. In mathematical terms this form is recognized as a convolution integral, which in the context of the dynamic (vibration) response of linear systems is also known as the Duhamel integral.
1 ε(t) = 2
54
Part A
Solid Mechanics Topics
Part A 3.2
analytically. Preferred forms have evolved, with precision being balanced against ease of mathematical use or a minimum number of parameters required. All viscoelastic material functions possess the common characteristic that they vary monotonically with time: relaxation functions decreasing and creep functions increasing monotonically. A second characteristic of realistic material behavior is that time is (almost) invariably measured in terms of (base 10) logarithmic units of time. Thus changes in viscoelastic response may appear to be minor when considered as a function of the real time, but substantial if viewed against a logarithmic time scale. Early representations of viscoelastic responses were closely allied with (simple) mechanical analog models (Kelvin, Voigt) or their derivatives. Without delving into the details of this evolutionary process, their generalization to broader time frames led to the spectral representation of viscoelastic properties, so that it is useful to present only the rudiments of that development. The building blocks of the analog models are the Maxwell and the Voigt models illustrated in Fig. 3.2a,b. In this modeling a mechanical force F corresponds to the shear stress τ and, similarly, a displacement/deflection δ corresponds to a strain ε. Under a stepwise applied deformation of magnitude ε0 – separating the force-application points in the Maxwell model – the stress (force) abates or relaxes by the relation τ(t) = ε0 μm exp(−t/ξ) , a)
b)
F
(3.18)
c)
F
μ μ
η
η
μ1
η1
μ2
η2
μ3
η3
F
F F
d) μ∞
F
μ1
μ2
μ3
μj
η1
η2
η3
ηj
F
where ξ = ηm /μm is called the (single) relaxation time. Similarly, applying a step stress (force) of magnitude to the Voigt element engenders a time-dependent separation (strain) of the force-application points described by τ0 [1 − exp(−t/ς)] , (3.19) ε(t) = μν where ς = ην /μν is now called the retardation time since it governs the rate of retarded or delayed motion. Note that this representation is used for illustration purposes here and that the retardation time for the Voigt material is not necessarily meant to be equal to the relaxation time of the Maxwell solid. It can also be easily shown that this is not true for a standard linear solid either. By inductive reasoning, that statement holds for arbitrarily complex analog models. The relaxation modulus and creep compliance commensurate with (3.18) (Maxwell model) and (3.19) (Voigt model) for the Wiechert and Kelvin models (Fig. 3.2c,d) are, respectively μn exp(−t/ξn ) (3.20) μ(t) = μ∞ + n
and J(t) = Jg +
Jn [1 − exp(−t/ςn )] + η0 t ,
where Jg and η0 arise from letting η1 → 0 (the first Voigt element degenerates to a spring) and μn → 0 (the last Voigt element degenerates to a dashpot). These series representations with exponentials are often referred to as Prony series. As the number of relaxation times increases indefinitely, the generalization of the expression for the shear relaxation modulus, becomes ∞ dξ (3.22) , μ(t) = μ∞ + H (ξ) exp(−t/ξ) ξ 0
where the function H (ξ) is called the distribution function of the relaxation times, or relaxation spectrum, for short; the creep counterpart presents itself with the help of the retardation spectrum L(ζ ) as ∞
μj
ηj
J(t) = Jg +
L(ζ )[1 − exp(−t/ζ )] 0
F
Fig. 3.2a–d Mechanical analogue models: (a) Maxwell, (b) Voigt, (c) Wiechert, and (d) Kelvin
(3.21)
n
dζ + ηt , ζ (3.23)
Note that although the relaxation times ξ and the retardation times ζ do not, strictly speaking, extend over the range from zero to infinity, the integration limits are so
Mechanics of Polymers: Viscoelasticity
3.2 Linear Viscoelasticity
assigned for convenience since the functions H and L can always be chosen to be zero in the corresponding part of the infinite range.
3.2.5 Spectral and Functional Representations
3.2.4 General Constitutive Law for Linear and Isotropic Solid: Poisson Effect
A discrete relaxation spectrum in the form H (ξ) = μn ξn δ(ξn ) ,
One combines the shear and bulk behavior exemplified in (3.13), (3.16) and (3.19), (3.20) into the general stress–strain relation t 2 ∂εkk K (t − τ) − μ(t − τ) dτ σij (t) = δij 3 ∂τ t +2 0−
μ(t − τ)
∂εij dτ , ∂τ
(3.24)
where δij is again the Kronecker delta. Poisson Contraction A recurring and important parameter in linear elasticity is Poisson’s ratio. It characterizes the contraction/expansion behavior of the solid in a uniaxial stress state, and is an almost essential parameter for deriving other material constants such as the Young’s, shear or bulk modulus from each other. For viscoelastic solids the equivalent behavior cannot in general be characterized by a constant; instead, the material equivalent to the elastic Poisson’s ratio is also a time-dependent function, which is a functional of the stress (strain) history imposed on a uniaxially stressed material sample. This time-dependent function covers basically the same (long) time scale as the other viscoelastic responses and is typically measured in terms of 10–20 decades of time at any one temperature. However, compared to these other functions, its value changes usually from a maximum value of 0.35 or 0.4 at the short end of the time spectrum to 0.5 for the long time frame. Several approximations are useful. In the nearglassy domain (short times) its value can be taken as a constant equal to that derived from measurements well below the glass-transition temperature. In the long time range for essentially rubber-like behavior the approximation of 0.5 is appropriate, though not if one wishes to convert shear or Young’s data to bulk behavior, in which case small deviations from this value can play a very significant role. If knowledge in the range between the (near-)glassy and (near-)rubbery domain are required, neither of the two limit constants are strictly appropriate and careful measurements are required [3.14–16].
(3.25)
where δ(ξn ) represents the Dirac delta function, clearly leads to the series representation (3.20) and can trace the modulus function arbitrarily well by choosing the number of terms in the series to be sufficiently large; a choice of numbers of terms equal to or larger than twice the number of decades of the transition is often desirable. For a history of procedures to determine the coefficients μn see the works by Hopkins and Hamming [3.17], Schapery [3.18], Clauser and Knauss [3.19], Hedstrom et al. [3.20], Emri and Tschoegl [3.21–26], and Emri et al. [3.27, 28], all of which battle the ill-conditioned nature of the numerical determination process. This fact may result in physically inadmissible, negative values (energy generation), though the overall response function may be rendered very well. A more recent development that largely circumvents such problems, is based on the trust region concept [3.29], which has been incorporated into MATLAB, thus providing a relatively fast and readily available procedure. The numerical determination of these coefficients occurs through an ill-conditioned integral or matrix and is not free of potentially large errors in the coefficients, including physically inadmissible negative values, though the overall response function may be rendered very well. Although expressions as given in (3.22) and (3.23) render complete descriptions of the relaxation or creep behavior once H (ξ) or L(ξ) are determined for any material in general, simple approximate representations can fulfill a useful purpose. Thus, the special function μ0 − μ∞ ξ0 n exp(−ξ0 /ξ) (3.26) H (ξ) = Γ (n) ξ with the four parameters μ0 , μ∞ , ξ0 , and n representing material constants, where Γ (n) is the gamma function, leads to the power-law representation for the relaxation response μ(t) = μ∞ +
μ0 − μ∞ . (1 + t/ξ0 )n
(3.27)
This equation is represented in Fig. 3.3 for the parameter values μ∞ = 102 , μ0 = 105 , ξ0 = 10−4 , and n = 0.35. It follows quickly from (3.22) and the figure that μ0 represents the modulus as t → 0, and μ∞
Part A 3.2
0−
55
56
Part A
Solid Mechanics Topics
3.2.6 Special Stress or Strain Histories Related to Material Characterization
log modulus 6
For the purposes of measuring viscoelastic properties in the laboratory we consider several examples in terms of shear states of stress and strain. Extensional or compression properties follow totally analogous descriptions.
5 4 3 2
Part A 3.2
1 –10
–5
0
5
10 log t
Fig. 3.3 Example of the power-law representation of a relaxation modulus
its behavior as μ(t → ∞); ξ0 locates the central part of the transition region and n the (negative) slope. It bears pointing out that, while this functional representation conveys the generally observed behavior of the relaxation phenomenon, it usually serves only in an approximate manner: the short- and long-term modulus limits along with the position along the log-time axis and the slope in the mid-section can be readily adjusted through the four material parameters, but it is usually a matter of luck (and rarely possible) to also represent the proper curvature in the transitions from short- and long-term behavior. Nevertheless, functions of the type (3.26) or (3.27) can be very useful in capturing the essential features of a problem. With respect to fracture Schapery draws heavily on the simplified power-law representation. An alternative representation of one-dimensional viscoelastic behavior (shear or extension), though not accessed through a distribution function of the type described above, is the so-called stretch exponential formulation; it is often used in the polymer physics community and was introduced for torsional relaxation by Kohlrausch [3.30] and reintroduced for dielectric studies by Williams and Watts [3.31]. It is, therefore, often referred to as the KWW representation. In the case of relaxation behavior it takes the form (with the addition of the long-term equilibrium modulus μ∞ ),
(3.28) μ(t) = μ∞ + μ0 exp −(t/ξ0 )β . Further observations and references relating to this representation are delineated in [3.13].
Unidimensional Stress State We call a stress or strain state unidimensional when it involves only one controlled or primary displacement or stress component, as in pure shear or unidirectional extension/compression. Typical engineering characterizations of materials occur by means of uniaxial (tension) tests. We insert here a cautionary note with respect to laboratory practices. In contrast to working with metallic specimens, clamping polymers typically introduces complications that are not necessarily totally resolvable in terms of linear viscoelasticity. For example, clamping a tensile specimen in a standard test machine with serrated compression claps introduces a nonlinear material response such that, during the course of a test, relaxation or creep may occur under the clamps. Sometimes an effort is made to alleviate this problem by gluing metal tabs to the end of specimens, only to introduce the potential of the glue line to contribute to the overall relaxation or deformation. If the contribution of the glue line to the deformation is judged to be small, an estimate of its effect may be derived with the help of linear viscoelasticity, and this should be stated in reporting the data. For rate-insensitive materials the pertinent property is Young’s modulus E. For viscoelastic solids this constant is supplanted by the uniaxial relaxation modulus E(t) and its inverse, the uniaxial creep compliance D(t). Although the general constitutive relation (3.24) can be written for the uniaxial stress state (σ11 (t) = σ0 (t), say, σ22 = σ33 = 0), the resulting relation for the uniaxial stress is an integral equation for the stress or strain ε11 (t), involving the relaxation moduli in shear and dilatation. In view of the difficulties associated with determining the bulk response, it is not customary to follow this interconversion path, but to work directly with the uniaxial relaxation modulus E(t) and/or its inverse, the uniaxial creep compliance D(t). Thus, if σ11 (t) is the uniaxial stress and ε11 (t) the corresponding strain, one writes, similar to (3.10) and (3.12),
t σ11 (t) = ε11 (0)E(t) + 0+
E(t − ξ)
dε11 (ξ) dξ dξ
Mechanics of Polymers: Viscoelasticity
ε
ε
ε0
t0
tions to generate a ramp
+
t0
t
t0
t
t
modulus (3.22) together with the convolution relation (3.10) to render, with ε˙ (t) = const = ε˙ 0 and ε(0) = 0, the general result t
0+
We insert here a cautionary note with respect to laboratory practices: In contrast to working with metallic specimens, clamping polymers typically introduces complications that are not necessarily totally resolvable in terms of linear viscoelasticity. For example, clamping a tensile specimen in a standard test machine with serrated compression clamps introduces nonlinear material response such that during the course of a test relaxation or creep may occur under the clamps. Sometimes an effort is made to alleviate this problem by gluing metal tabs to the end of specimens, only to introduce the potential of the glue-line to contribute to the overall relaxation or deformation. If the contribution of the glue-line to the deformation is judged to be small an estimate of its effect may be derived with the help of linear viscoelasticity, and such should be stated in reporting the data. Constant-Strain-Rate History. A common test method
for material characterization involves the prescription of a constant deformation rate such that the strain increases linearly with time