Generalized Musical Intervals and Transformations
This page intentionally left blank
Generalized Musical Intervals and Transformations
David Lewin
OXFORD UNIVERSITY PRESS
2007
OXFORD UNIVERSITY PRESS
Oxford University Press, Inc., publishes works that further Oxford University's objective of excellence in research, scholarship, and education. Oxford New York Auckland Cape Town Dar es Salaam Hong Kong Karachi Kuala Lumpur Madrid Melbourne Mexico City Nairobi New Delhi Shanghai Taipei Toronto With offices in Argentina Austria Brazil Chile Czech Republic France Greece Guatemala Hungary Italy Japan Poland Portugal Singapore South Korea Switzerland Thailand Turkey Ukraine Vietnam
Copyright © 2007 by Oxford University Press, Inc. Originally published 1987 by Yale University Press Published by Oxford University Press, Inc. 198 Madison Avenue, New York, New York 10016 www.oup.com Oxford is a registered trademark of Oxford University Press All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of Oxford University Press. Library of Congress Cataloging-in-Publication Data Lewin, David, 1933-2003. Generalized musical intervals and transformations / David Lewin. p. cm. Originally published: New Haven: Yale University Press, c1987. Includes bibliographical references and index. ISBN 978-0-19-531713-8 1. Music intervals and scales. 2. Music theory. 3. Title. ML3809.L39 2007 781.2'37—dc22 2006051121 1 3 5 7 9 8 6 4 2 Printed in the United States of America on acid-free paper
For June and Alex
This page intentionally left blank
Contents
Foreword by Edward Gollin Preface
xiii
Acknowledgments Introduction 1. 2.
ix
xxvii
xxix
Mathematical Preliminaries
1
Generalized Interval Systems (1): Preliminary Examples and Definition
16
3.
Generalized Interval Systems (2): Formal Features
31
4.
Generalized Interval Systems (3): A Non-Commutative GIS; Some Timbral GIS models
60
5. Generalized Set Theory (1): Interval Functions; Canonical Groups and Canonical Equivalence; Embedding Functions
88
6. 7. Transformation Graphs and Networks (1):
Generalized Set Theory (2): The Injection Function
Intervals and Transpositions
123
157
8. Transformation Graphs and Networks (2): Non-Intervallic Transformations
175
193 9. Transformation Graphs and Networks (3): Formalities 10. Transformation Graphs and Networks (4): Some Further Analyses 11. Appendix A: Melodic and Harmonic GIS Structures; Some Notes on the History of Tonal Theory
245
12. Appendix B: Non-Commutative Octatonic GIS Structures; More on Simply Transitive Groups Index
255
251
220
This page intentionally left blank
Foreword to the Oxford Edition Edward Gollin
It has been nearly twenty years since the initial publication of David Lewin's Generalized Musical Intervals and Transformations (GMIT), and the work has aged well. This is due in part to the foundational nature of the book's subject matter. The work, a methodical examination of the concept of a musical interval, explores how the familiar notion of interval as "a distance extended between pitches in a Cartesian space" is merely one specific case of a more general idea, one that can embrace different kinds of musical objects (durations, meters, Klangs, timbres, and so on), different (i.e. non-Euclidean) geometries, and different orientational perspectives (interval as action or gesture rather than as simply measurement of distance between things). Along the way, the work recasts set theory, the concepts of transposition and inversion, and notions of musical time in this generalized image. But the work has maintained its relevance and importance as well because of the brilliance and musicality of its author. David had a gift for finding musically significant examples for his sometimes abstract concepts, and a gifted musical imagination that delighted in finding new ways to hear and understand familiar musical passages. While GMIT does not offer the extended musical analyses of his later books, Musical Form and TransformationorStudies in Music with Text, the work is nonetheless rich with smaller analytical gems. To be sure, transformational theory has evolved in the years sinceGMITfirst appeared—the analytical use of Klumpenhouwer networks, the development of neo-Riemannian theory, and the resurgence of spatial methodologies and metaphors in analysis all postdate David's seminal study. But each of these subsequent developments can find its basis in the framework David sets forth in GMIT: Klumpenhouwer networks apply the Generalized Interval System (GIS) concept recursively to create networks of networks; neo-Riemannian theory, which emerged from explorations begun in chapter 8 of GMIT, takes families of contextual transforma-
ix
Foreword to the Oxford Edition
tions to be the formal intervals between the familiar set of harmonic triads or seventh chords; spatial methodologies simply extend the idea of transformational networks to create graphs that embrace all members of a family of objects (pitches, pitch sets, rhythmic durations, and so on) related by certain contextually significant intervals.1 One notable new feature of this edition is an author's addendum (the preface), drawn from a previously unpublished typescript titled "Updating GMIT," which presents, in a sometimes synoptic form, concepts or musical examples David had planned for a future edition of GMIT. The document was likely written in the summer of 1987 and was used as the handout for a talk given at the Eastman School of Music in the fall of that same year. It should not be surprising to those who knew David's incredible industry and the speed with which he could read and suggest revisions to others' work that David would have been drafting plans for a new edition of GMIT so soon after its publication—for David, it was often difficult to stop thinking about a project, or tinkering with its ideas, once begun, and the document clearly represents David's residual energy following the writing of GMIT. The examples explored in the addendum are diverse, although certain themes recur. For one, David seems to have been particularly concerned with examples that involve non-commutative groups of operations, no doubt because such groups often defy our accustomed and familiar intuitions about the way intervals work. For another, David seems to have been interested in finding examples that do not simply involve individual pitch classes (transformations of melodies, of Lagen in triple counterpoint, of ordered hexachords), again because these are less familiar, and often reveal less intuitive aspects of interval. Although the document is perfectly intelligible, some sections of "Updating GMIT" deserve additional comment. 1. The error in figure 8.2 (g minor instead of g# minor) that prompted David's commentary in section I has been corrected in this edition. The first section of David's notes was expanded to become his article "Some Notes on Analyzing Wagner: The Ring and Parsifal" (19th-century Music 16.1, 1992, reprinted in David Lewin, Studies in Music with Text [Oxford University Press, 2006]). 2. David developed and expanded section IV into a pair of unpublished exercises for his math and music course at Harvard University. Exercise 5 (2 pages) directs the student to discover the elements of the Q-X group acting on the augmented triads of sc (014589) and then find transformations of the "rapture of the
x
1. David has written articles on each of these topics subsequent to the publication of GMIT. Klumpenhouwer networks are the topic of two articles: "Klumpenhouwer Networks and Some Isographies that Involve Them," Music Theory Spectrum 12.1 (1990): 83-120, and "A Tutorial on Klumpenhouwer Networks, Using the Chorale in Schoenberg's op. 11, no. 2," Journal of Music Theory 38.1 (1994): 79-101. David's most significant post-GMIT contribution to neo-Riemannian theory is the article "Cohn Functions," Journal of Music Theory 40.2 (1996): 181-216. Two of David's contributions to graphical methods of analysis are "The D-major Fugue Subject from WTCII: Spatial Saturation?" Music Theory Online 4.4 (1998), and "Notes on the Opening of the F# Minor Fugue from WTC I," Journal of Music Theory 42.2 (1998): 235-239.
Foreword to the Oxford Edition
strife" figure under Q4, Q8, and X5 in Schoenberg's Ode to Napoleon (as in David's example 2 from the addendum). An optional part of that exercise encourages students to explore transformations of characteristic tetrachords in Schoenberg's Ode using the members of the same Q-X group. Exercise 8 (3 pages) explores the simple transitivity of the Q-X group and has the student find the (interval-preserving) elements of the commuting group, {T0, T4, T8, I,, I5, I9). David's article "Generalized Interval Systems for Babbitt's Lists, and for Schoenberg's String Trio" (Music Theory Spectrum 17.1 [1995]: 81-118), in particular "Part 5: Background on Non-Commutative GISs," explores the relationship between non-commutative GISs and their commuting groups. 3. David similarly developed and extended section V into an exercise for his math and music course (exercise 9,4 pages). The Daniel Harrison article to which David refers was published as "Some Group Properties of Triple Counterpoint and Their Influence on Compositions by J. S. Bach" (Journal of Music Theory 32.1 [1988]: 23-49). David inserted a manuscript page into the "Updating GMIT" typescript that presents a TPERM and VPERM analysis of Bach's c-minor fugue from the Well-Tempered Clavier, Book I. The manuscript notes that the diagram is modeled after Schenker's "Table of Voices" from "Das Organische der Fuge" in Das Meisterwerk in derMusik, Band II, p. 59, and further observes that the Lagen symbol "'A' can mean 'Subject,' 'B' can mean 'Countersubject' and 'C' can mean 'any third part of roughly characteristic rhythm'" (emphasis Lewin's), suggesting that the methodology is not bound to works in strict triple counterpoint. David's diagram, however, has not been incorporated into the author's addendum of this volume because David wrote no accompanying text for it—creating new text would have adversely disrupted David's prose in the rest of the section. David, however, did use the c-minor fugue analysis as part of exercise 9 in his math and music course, which I present below for interested readers to explore if they wish (terminology has been adapted to conform to the text of "Updating GMIT"): PART I OF EXERCISE 9: (a) Complete the partially-filled diagram below, which pertains to the c-minor fugue in Book I: Meas.
Stufe
1
i
11 15 20 26.5
m V
i i
Lage
TPERM interval
VPERM interval
(b) Discuss features of the construction which you find revealed by the double intervallic analysis. For instance, does the use of 3-cycles bring out any aspect of the structure? Do the TPERM and VPERM
xi
Foreword to the Oxford Edition
analyses coincide as they did [in the A-major Prelude]? What aspects of the piece are bound together by repetition of TPERM intervals? By repetition of VPERM intervals? 4. Section VI considers the GIS structure of a family of 12-tone-row transformations that David first explored in his article "On Certain Techniques of ReOrdering in Serial Music" (Journal of Music Theory 10.2 [1966]: 276-287). David refers in the section to "an excellent work, as yet unpublished" by Andrew Mead. That work was published in two parts as "Some Implications of the PitchClass/Order-Number Isomorphism Inherent in the Twelve-Tone System: Part One" (Perspectives of New Music 26.2 [1988]: 96-163) and, more pertinent to Lewin's addendum, "Some Implications of the Pitch-Class/Order-Number Isomorphism Inherent in the Twelve-Tone System Part Two: The Mallalieu Complex: Its Extensions and Related Rows" (Perspectives of New Music 27.1[1989]: 180-233). David, of course, never created a second edition ofGMIT, an undertaking that, he wrote, would have involved "[fixing] a lot of errata & corrigenda; some major rewrites here and there; a reasonable amount of bibliographic updating."2 This edition ofGMIT, while retaining the text of the original, does incorporate the corrections indicated by David's errata list. Moreover, while it does not attempt to identify or alter passages that David felt needed rewriting, the articles cited in this foreword give a picture of David's evolving ideas about transformational theory. And while David may have wanted a new edition of GMIT, rather than a second printing, he was also eager to make GMIT available to students and scholars. In these respects, this Oxford edition fulfills David's wishes—that his ideas be available to all who seek them, so that they may grow, evolve and multiply. 2. 1995 e-mail correspondence, recipient unknown.
xii
Preface
I. The following figures redo those of figure 8.2 on p. 179. Music examples la and b present scores of the relevant passages.
L = LEITTONWECHSEL; +- = MAJOR-MINOR; S = "BECOMES SUBDOMINANTOF".
EXAMPLE la
xiii
Preface b) Modulating section of Valhalla, Rheingold II,5ff.
EXAMPLE Ib
The analysis is better than that in the book. It brings out a clear isography between the passages. Figure 8.2a in the book is not a well-formed "graph" by the later definition. (SUBM is not = LT SUED on major as well as minor Klangs: (C,+) SUBM = (e,-) but (C,+)LT SUED = (e,-)SUBD = (b,-).) The symbol "(G,-)" on figure 8.2a is a misprint for (Gt,-).1 The discussion of section 8.1.2, pages 179-180, still applies: a group that contains L, S, and +— operations on Klangs will not be simply transitive in equal temperament. (For instance, (C,+)SSSS =(E,+), but (C,+)L +- also = (E,+).) xiv
1. See item 1 in the foreword, p. x.
Preface
Later in the Ring, Wagner develops the relationship of Valhalla and Tarnhelm themes very ambitiously. Figures c) through f) below analyze a transformation that occurs at the climax of Walkure 11,2: Woton, coming to realize the full implications of Valhallagate, ironically gives his blessing to Hagen ("So nimm meinen Segen, Niblungen Sohn!"). Music examples Ic through le are coordinated with the figures.
EXAMPLE Ic-e Figure Ic) shows the Valhalla Kopf put into At major and 4/4 meter, with the original harmonization. Figure d) is the +- transform of c). Figure e) transforms d) so that the subdominant inflection of c)—d) is applied not to the tonic but to the Leittonwechsel of the tonic; also the inflected Klangs change mode as they go, via + — . Music example le is essentially the upper part of the accompaniment for Wotan's pronouncement (there is more beneath!). The Tarnhelm network infects the diatonic aspect of Valhalla here. Figure f) brings that out by rewriting e) in a format that suggests a). In the Waltraute scene of Gotterdammerung, the idea gets even more overloaded ... rather like the picture of Dorian Grey.
JCV
Preface
II. An interesting transformation network is used by Lora L. Gingerich, ". . . Melodic Motivic Analysis in ... Charles Ives," MTS 8 (1986), 75-93. The network appears as her example 24, page 90.
III. Let s be the twelve-tone row of Schonberg's Fourth Quartet. Let S be the family comprising the 48 forms of s. Let TTO be the group of forty-eight twelve-tone operations. TTO is simply transitive on S (given forms s and t, there exists a unique member OP of TTO such that OP(s) = t.) It follows that we can develop a CIS structure for S in such wise that the members of TTO are exactly the formal transposition operations for the GIS (GMIT1A. 1, pp. 157-58). The standard practice, in which forms of the row are labeled by their TTO-intervals from a "tonic" referential row-form—as "RI3," "17," etc.—instances the LABELing practice discussed in chapter 3 of GMIT. If s is any one of the 48 forms, then there exists a unique inverted form of s (in this case) which shares the same three tetrachordal segments with s. Define a transformation TETRA on S: given a sample s, TETRA transforms s into this inverted tetrachordal associate. For instance: TETRA (Ob78 312a 6549) = 780b 4659 123a; TETRA (5012 6a9b 4378) = 6ba9 5120 7843. The transformation TETRA is a formal interval-preserving operation of the GIS under discussion (GMIT 3.4.6, p. 48). Similar operations for this particular row, like TRI and HEXA, are also interval-preserving operations. In his dissertation on Moses undAron (Yale, 1983), Michael Cherlin argues that transformations of this sort, engaging the forms of the Moses row, are highly constructive features of Schonberg's compositional method in the opera.
xvi
IV. Appendix B in GMIT outlines two possible non-commutative GIS structures for the octatonic set. It develops two simply transitive groups of operations on that set; either may be taken as the group of formal transpositions for a GIS; the other then becomes the group of formal interval-preserving operations. A similar situation obtains for set-class 6-20. Taking S as [modeled by] the six numbers 0,1,4,5,8, and 9 mod 12, two simply transitive groups of operations may be defined on S as follows. The group Gl comprises the operations R0= identity, R4 = pc transposition by 4, R8 = pc transposition by 8, Jl = pc inversion with index number 1, J5 = pc inversion with index number 5, and J9 = pc inversion with index number 9. (In the GIS determined by this simply transitive group, all the six operations are formal "transpositions" for that GIS.) The group G2 comprises the six operations RO, Q4, Q8, XI, X5, and X9, defined as follows:
Preface
RO = identity operation. Q4 takes pcs 0,4, and 8 to pcs 4, 8, and 0 resp.; takes pcs 1,5, and 9 topes 9,1, and 5 resp. Q8 takes pcs 0,4, and 8 to pcs 8,0, and 4 resp.; takes pcs 1,5, and 9 to pcs 5, 9, and 1 resp. The Qs are "queer" operations, as opposed to the "rotations" R. XI exchanges each pc of 6-20 with that pc which lies ic 7 away. Thus XI maps 0 to 1,1 to 0,4 to 5, 5 to 4, 8 to 9, and 9 to 8. X5 exchanges each pc with the pc that lies ic 5 away. X9 exchanges each pc with the pc that lies ic 3 away. Both the groups Gl and G2 are simply transitive on S. Either group may be taken as the group of formal transpositions for a formal GIS involving S; the other group thereupon becomes the group of interval-preserving transformations. The pertinence of G2 is manifest in Schonberg's Ode to Napoleon. Music example 2 shows some prominent thematic motives of the piece, all interrelated by operations of G2. Example 2a projects a six-note series that is mapped into example 2b by Q8. 2b' retrogrades 2b; 2c shows the series of 2b' in action. Example 2d is the Q4-transform of series 2a; 2e shows series 2d in action. Example 2f is the
EXAMPLE 2
xvii
Preface
X5-transform of series 2a; 2g is a combinatorial inversion of series 2f, and 2h shows series 2g in action. The motives of 2a, 2c, 2e, and 2h appear frequently in the work, at a variety of pitch levels, retrograded (= inverted), etc.; the various sixnote series generate characteristic tetrachordal segments that are ubiquitous motivic germs in the music. (These tetrachords are all G2-forms of one another).
V. Daniel Harrison, in a recent study of triple counterpoint, has made interesting analytic use of GIS structures.2 I adapt his procedures to my terminology here. Let us suppose three tunes, A, B, and C, that work in triple counterpoint. Let us suppose three voices, 1, 2, and 3, in which the tunes can appear. We can consider the six various possible dispositions of the three tunes in the three voices; let us call each such disposition a "Lage." We can model each Lage by a three-element series: thus the series models "tune B in voice 1, tune C in voice 2, and tune A in voice 3." Let LAGEN be the family of the six possible Lagen. Given two members of LAGEN, there are two "natural" ways to conceptualize a transformation taking the first Lage into the second. For instance, suppose s and t are the Lagen and respectively. We can imagine the tunes as being permuted, to get from s to t: tune B (in voice 1) becomes tune C; tune C (in voice 2) becomes tune A; and tune A (in voice 3) becomes tune B. Thus, in getting from s to t, we permute tune B to tune C, tune C to tune A, and tune A to tune B. We can symbolize this permutation of tunes by the symbol (ABC): A becomes B, B becomes C, and C becomes A. But there is also another "natural" way of conceptualizing getting from s to t: we can imagine the voices as being permuted. Thus, in passing from s = to t = , we can note that tune B, in voice 1 for s, goes into voice 3 for t; tune C, in voice 2 for 5, goes into voice 1 for t; tune A, in voice 3 for 5, goes into voice 2 for t. In sum, voice 1 of s becomes voice 3 of t; voice 3 of s becomes voice 2 of t; and voice 2 of s becomes voice 1 of t. We can symbolize this permutation of voices by the symbol (132): 1 becomes 3, 3 becomes 2, and 2 becomes 1. There are six possible permutations on the symbols {A,B,C}; the six permutations can be used to label six transformations on LAGEN; those six transformations form a group of operations on Lagen which we shall call TPERMS, for "tune-permutations." There are six possible permutations on the symbols {1,2,3}; those six permutations can be used to label six transformations on LAGEN; and those six transformations form a group of operations on Lagen which we shall call VPERMS, for "voice-permutations." Both the groups TPERMS and VPERMS are simply transitive on LAGEN. Either group can be taken as the group of formal transpositions for a GIS whose
xviii
2. See item 3 in the foreword, p. xi.
Preface
family is LAGEN; the other group thereupon becomes the group of formal intervalpreserving operations for the GIS. This situation is as in the last paragraph of appendix B, GMIT. Harrison analyzes the D-major 3-part invention, observing most of the following structure. "A" is the lead-off theme in the rh; "B" is the counterpoint that runs along in sixteenths; "C" is the counterpoint which steps down in leisurely suspensions. Meas.
Stufe
Lage
TPERM interval
VPERM interval
(ACB)
(123)
(ACB) (BIG MIDDLE SECTION) (ACB) (ACB)
(123)
3.5
V
6
I
10
vi
19
IV
21.5
I
23.5
I
(132) (132)
The columns headed "TPERM interval" and "VPERM interval" are read as follows: from Lage (m.3.5) to Lage (m.6) the formal interval of transposition in the TPERM GIS is (ACB), while the formal interval of transposition in the VPERM GIS is (123). From Lage (m.19) to Lage (m.21.5) the formal interval of transposition in the TPERM GIS is (ACB), while the formal interval of transposition in the VPERM GIS is (132). Harrison points out that all six Lagen appear. He notes that the articulation into the two subfamilies of 3 Lagen each, before and after the middle of the piece, is "natural." He points out that in the first half of the piece, the tunes "sweep down" through the voices, while in the second half of the piece, the tunes "sweep up" through the voices. (He does not use the VPERM GIS to discuss this, but expresses it by investigating specific properties of the group TPERMS.) He makes a number of other cogent observations about the TPERM structure of the piece. Among those, he notes that the second half of the piece is TPERM-isographic to the first half, even though the tunes "sweep down" the voices in the first half and "sweep up" the voices in the second half. In GMIT terminology, this can be expressed by noting that in the VPERM GIS, the second half of the piece is ann'-isographic to the first half: (132) is the inverse of (123) in VPERMS. Harrison analyzes other works, including the f-minor invention. Here is my analysis of Lagen in the A-major Prelude from Book I:
xix
Preface Meas.
Stufe
Lage
1
I
4
V
8.5
I
12
vi
16.5
I
19
I
TPERM interval
VPERM interval
(ABC)
(132)
(ABC)
(132)
(ABC)
(132)
(ABC)
(132)
(AB)
(13)
This analysis is useful to contrast to the D-major invention. Here only four Lagen are used. The idea seems to be that the final tonic Lage has a special function here: it breaks the otherwise incessant chain of (ABC) or (132) intervals. Harrison's analysis of the f-minor invention provides still a different idea, for laying out various Lagen. The whole enterprise smells of Marpurg; perhaps the way in which he formulated "Rameau's" (i.e. his) theories of chord inversion might bear similar updating, perhaps even in a somewhat isomorphic vein. VI. Let us consider the family SPECIAL of 12-tone rows whose order-rotation beginning on order-number 4 is the same as their T4-transpose. An example of a SPECIAL row is Ob56439a8712: starting the row at order-number 4 and proceeding therefrom, we derive 439a8712 [and around the end to] Ob56; this order-rotation is the same as T4 of the original row. To fix a notation, we consider each SPECIAL row as a function s mapping the order number ord [mod 12] into the pc number s(ord) [mod 12]. The SPECIAL row of the above paragraph is thus conceived as a function s: s(0) = 0, s(/) = b, s(2) = 5, ...,s(a) = l,s(fc) = 2. Using this notation, we can write out the algebraic property that characterizes SPECIAL rows: SPECIAL PROPERTY: for all ord, s(ord + 4 = s(ord) + 4. [all addition mod 12]
xx
Of interest to us here is the fact that the family of SPECIAL rows admits a simply transitive group-of-operations G in a natural way. Therefore, according to the discussion of GMIT, the family of SPECIAL rows has a natural GIS structure, a structure in which the operations of G play the role of formal transpositions. What follows is a semi-formal development of the group G, and a semi-formal indication that G is simply transitive on SPECIAL.
Preface
To begin with we consider certain operations ADD{j,m}, where j is some multiple of 4 mod 12 and m is some multiple of 3 mod 12; i.e. j = 0, 4, or 8, and m = 0,3,6, or 9. The operation ADD{j,m}, when applied to the SPECIAL row s, adds the pc interval j to the mm, the (m+4)th, and the (m+S)th notes of s. For example, let us take the SPECIAL row of the first paragraph above and apply the operation A{8,3} to it, adding the pc interval 8 to its 3rd, 7th, and b\h notes: o r dnumbers: 0 1 2 3 4 5 6 7 8 9 a b pc numbers of s: O b 5 6 4 3 9 a 8 7 1 2 We add 8 to 3rd, 7th, and Mi, +8 +8 +8 obtaining pc numbers of ADD{8,3}(s): O b 5 2 4 3 9 6 8 7 1 a In the example, we note that ADD {8,3}(s) is still a row. That is because s is SPECIAL: since s(ord + 4) = s(ord) + 4, it follows that the pc numbers s(3), s(7), and s(&)—that is the 3rd, 7th, and 6th notes of s—form an augmented triad. In the example above the augmented triad comprises the pc numbers 6, a, and 2. When we add the interval j = 8 to each of these pc numbers, we simply permute the members of that augmented triad among themselves, without disturbing the other pcs in the other order-positions of the row. Thus, in the above example,
order-positions contain pcs of the row s; when 8 is added to each of those pc numbers, the same order-positions then contain pcs of the row ADD{ 8,3}(s), while the other pcs of s "carry on down" to ADD{8,3}(s), unchanged in their order-positions.
3, 6,
7, a,
b 2
2,
6,
a
This observation can be made rigorous and general, to show that each operation ADD{j,m}, when applied to any SPECIAL row s, yields a row. Furthermore, it can be proved what is intuitively obvious: the new row ADD{j,m}(s) will itself be SPECIAL. The following formulas are easily verified, for j and k any multiples of 4 mod 12, and for m and n any multiples of 3 mod 12: FORMULA 1: ADD{j,m} ADD{k,m} = ADD{j+k,m} FORMULA 2: ADD{j,m} ADD{k,n} = ADD{k,n}ADD{j,m} ADD{0,m} is the identity operation, for each m: it leaves [the pcs of] any sample SPECIAL row unchanged. It follows, via formulas 1 and 2, that the collection of all operations that can be written in form ADD{jO,0} ADD{j3,3} ADD{j6,<5} ADD{j9,9} is a group of operations. We will call this group "ADDINGS." The group is commutative. It has 3-times-3-times-3-times-3 members, ie 81 members.
xxi
Preface
Now we shall develop another group of operations on SPECIAL rows, a group we shall call "PERM." A PERM operation X{p} is defined by any permutation p that acts upon the four symbols 0,3, (5, and 9. Here the permutation p is to be considered as any 1-to-l function that maps the family of four symbols onto itself. The PERM operation X{p} is determined by the PERM DEFINITION: X{p}(s)(m +/) = s(p(m) + j ) where m symbolizes a multiple of 3 mod 12 and; symbolizes a multiple of 4 mod 12. Fix m = 0 in the formula of the definition, and let; run through the values 0, 4, and & The formula tells us that the Oth, 4th, and 8th notes of the X{p}(s) will be respectively the p(0)th, (p(0)+4)th, and (p(0)+5)th notes of s. Similarly [for m = 3] the 3rd, 7th, and £th notes of X{p}(s) will be respectively the p(3)rd, (p(3)+4)th, and (p(3)+S)th notes of s. And so forth [for m = 6 and m = 9]. For an example, fix p to be the permutation p(0) = 3, p(3) = 0, p(6) = 6, p(9) = 9. Then, according to the work we have just gone through, X{p}(s) will have in its Oth, 4th, and 5th order-positions the 3rd, 7th, and bth notes of s respectively, while X{p}(s) will have in its 3rd, 7th, and bth order-positions the Oth, 4th, and 5th notes of s respectively; otherwise X{p}(s) will maintain the [other] notes of s in their respective order positions. The diagram below shows this X{p} applied to the specimen special row used before. o r dnumbers: 0 1 2 3 4 5 6 7 8 9 a b pc numbers of s: 0 4 8 b 5 39 71 6 a 2 pc numbers of X{p}(s): 6 a 2 b 5 39 71 0 4 8 For any SPECIAL row s, and any permutation p, X{p}(s) is a SPECIAL row. If p and q are permutations, then we have FORMULA 3: X{p} X{q) = X{qp}. The PERM operations on SPECIAL rows form a group (anti)-isomorphic to the group of permutations on the four symbols 0,3,6,9. PERM therefore has 4! = 24 members. The group is not commutative. The following formula can be proved: FORMULA 4: ADD{j,m} X{p) = X{p} ADD{j,p(m)}]. In general, therefore, members of PERM do not commute with members of ADDINGS. However, formula 4 tells us that the collection of all operations which can be expressed as some-ADDING-following-some-PERM is a closed family of xxii
Preface
EXAMPLE 3
xxiii
Preface
operations: following one such by another such will generate a third such. It follows that this collection of operations is a group of operations. It is our desired group G. A specimen member of G can be written in CANONICAL FORM: ADD{jO,0} ADD{j3,3} ADD{j6,<5} ADD{J9,P} X{p}. The chromatic scale is one SPECIAL row. It is straightforward, if tedious, to show that given any SPECIAL row s, there is a unique member of our group G which transforms s into the chromatic scale. (Set kO = s(0), k3 = s(3), k6 = s(6), k9 = s(9); since s is SPECIAL, each of the k's must lie within a different augmented triad; apply four appropriate ADDs to obtain a new s' in which the set of k'-values is 0,3,6, and 9; permute the row s' into the chromatic scale. Etc. etc.) It follows that the group G is simply transitive on SPECIAL rows: given any two SPECIAL rows s and t, there is a unique member of G, in the canonical form above, which transformes s to t. (Transform s into the chromatic scale; then transform the chromatic scale into t.) Thus the family of SPECIAL rows has a natural GIS structure, as discussed above. The group G has cardinality 81-times-24 = 1944; that then is also the number of SPECIAL rows. SPECIAL rows become more interesting when one notes their relation to "semi-Mallalieu" rows. Andrew Mead, in excellent work as yet unpublished, has investigated semi-Mallalieu rows exhaustively; some interesting insight can be shed on his work by placing it in a GIS setting.3 Pertaining to our SPECIAL rows are those semi-Mallalieu rows whose every-third-note transform is identical with their T4-transposition. Every-ninth-note of such a row will then be its T8-transposition. (Every-ninth-note = retrograde-of-every-fourth-note.) Such a row, for example, is a premise of my piano piece Just a Minute, Roger [PNM 16.2 (SS 1978), 143-45]: Ob45732681a9. Right at the opening of the piece, one hears quite clearly that every-third-note of this row is its T4-transpose: in meas. 1-4 (music example 3a), the total texture is governed by the row, while the right hand picks out every-third-note, thereby projecting T4-of-the-row. Later on, in meas. 30-35 (example 3b), the total texture is governed by the T4-form of the row, while the right hand picks out every-fourth-note-of-T4, thereby projecting the retrograde of every-ninth-note-of-T4 = the retrograde of T8(T4) = the retrograde of the original row. We shall focus in on these rows for the nonce, calling them SEMI-MALLALIEU. The point is, that the family of SEMI-MALLALIEU rows and the family of SPECIAL rows, along with their characteristic properties, are mathematically equivalent in structure under a transformation that makes each row in one family correspond
xxiv
3. See item 4 in the foreword, p. xii.
Preface
uniquely to a row in the other. I discuss that transformation in ITO 2.7 (October 1976), 8. The upshot of this is that the SEMI-MALLALIEU rows also form a natural GIS, whose formal transposition operations are the members of a natural simply transitive group G' that corresponds to the group G we have just explored. Mead's procedures enable one to find the equivalent of our G or G' for any operation OP on order numbers that can be written as four permutation-cycles of order 3 on the order numbers. OP generalizes "rotation-by-4" in the case of SPECIAL rows, or "every-third-note" in the case of SEMI-MALLALIEU rows.
VII. The injection function, discussed in chapter 6 of GMIT, can be generalized even farther. Let S and S' be any two families of objects—we allow here for the possibility that S' may be a different family from S. Let X be a (finite sub)set of S; let Y' be a (finite sub)set of S'; let f be any function from S into S'. Then the injection number into Y' for f, denoted INJ(X,Y')(f), is the number of elements s in X such that f(s) is a member of Y'. We can also develop a twin concept, not developed in GMIT: the surjection number of X into Y' for f, denoted SURJ (X,Y')(f), is the number of elements s' in Y' such that s' = f(s) for some member s of X. If f is not oneto-one or onto, SURJ(X,Y')(f) may be a very different number from INJ(X,Y')(f). EXAMPLE: Take S to be the family of numbers {0,1,2,4,6,8,10,14,16,18,19,20,22,23,24,26,27,28}. Take S' to be the family of pitches {A3,CH,D4,E4,F4,G4,A4,BI4,D5}. Take the function f to map S into S' according to the following table: s= 0 1 2 4 6 8 10 14 16 18 19 20 22 23 24 26 27 28 f(s)= D4 E4 F4 E4 D4 A4 D5 A4 BW G4 E4 A4 F4 D4 G4 E4 C#4 A3
The function f is onto but not one-to-one, f models certain aspects of the theme from Bach's d-minor Concerto. Take X to be the set of all numbers in S divisible by 4; thus X = {0,4,8,16,20,24,28}. Take Y' to be the triad {D4,F4,A4} within S'.
XXV
Preface
We have f(0) = D4, f(8) = A4, and f(20) = A4. Otherwise f(s) is not a member of the set Y' when s is a member of the set X. The three members 0,8, and 20 of X are mapped by f into members of Y'. Hence INJ(X,Y')(f) = 3. The two members D4 and A4 of Y' are attacked, during this passage, at time-points that are multiples of 4. Hence SURJ(X,Y')(f) = 2.
xxvi
A cknowledgmen ts
The time and leisure I needed to do this work were afforded by a Senior Faculty Fellowship from Yale University and by a Guggenheim Fellowship. The Guggenheim Foundation also provided a subvention toward publication. The excerpt from the score of Elliott Carter's String Quartet No, 1 is used by permission of Associated Music Publishers, New York. Material from Arnold Schoenberg's songs, Opus 15, from his Six Little Piano Pieces, Opus 19, and from Pierrot Lunaire, Opus 21, is used by permission of Belmont Music Publishers, Los Angeles, California 90049. Arnold Schoenberg's Phantasiefor Violin with Piano Accompaniment, Opus 47, is copyright 1952 by Henmar Press Inc. It has been used by permission of C. F. Peters Corporation. The excerpt from the score of Anton Webern's Four Pieces for Violin and Piano, Opus 7, and material from the third movement of his Variations for Piano, Opus 27, are used with these permissions: "Anton Webern—Four Piecesfor Violin and Piano, Op. 7. Copyright 1922 by Universal Edition. Copyright renewed 1950. All Rights Reserved. Used by permission of European American Music Distributors Corporation, sole U.S. agent for Universal Edition" and "Anton Webern—Variations for Piano, Op. 27. Copyright 1937 by Universal Edition. Copyright Renewed 1965. All Rights Reserved. Used by permission of European American Music Distributors Corporation, sole U.S. agent for Universal Edition." Analytic sketches for works by Bartok and Prokofieff appear with the following permissions: "Syncopation # 133 from Mikrokosomos (volumes 1-6) Bela Bartok © copyright 1940 by Hawkes & Son (London) Ltd.; Renewed 1967. Reprinted by permission of Boosey and Hawkes, Inc." and "Prokofieff: Melody # 1 from Melodies Op. 35. Reprinted by permission of Boosey & Hawkes, Inc. Copyright Owner."
xxvii
This page intentionally left blank
Introduction
The following overview of the book will provide a good point of departure. Chapter 1 is purely mathematical; it presents terminology and notation that will be needed later, along with a few important theorems. I am not happy to begin a book about music with a mathematical essay. On the other hand, I do feel that it is helpful for the reader to have this material collated and isolated from the rest of the book. Chapter 1 can be used for quick reference where it stands, and the material obtrudes only minimally into musical discussions later on. Readers who find themselves put off or fatigued in the middle of this chapter are urged to move on into the rest of the book; they can return to chapter 1 later, when later applications of the material make the reference back seem natural or desirable. Chapter 2 takes as its point of departure the general situation portrayed schematically by figure 0.1.
FIGURE 0.1 The figure shows two points s and t in a symbolic musical space. The arrow marked i symbolizes a characteristic directed measurement, distance, or motion from s to t. We intuit such situations in many musical spaces, and we are used to calling i "the interval from s to t" when the symbolic points are
xxix
Introduction
xxx
pitches or pitch classes. Chapter 2 begins by running through twelve examples of musical spaces for which we have the intuition of figure 0.1. Six involve pitches or pitch classes in melodic or harmonic relations; six involve aspects of measured rhythm. The general intuition at hand is then made formal by a mathematical model which I call a Generalized Interval System, GIS for short. A few basic formal properties of the model are explored. Then the twelve examples are reviewed to see how each (with one exception) instances the generalized structure. Chapter 3 concerns itself with further formal properties of the GIS model. In that model, the points of the space may be labeled by their intervals from one referential point; this has advantages and disadvantages. New GIS structures may be constructed from old in various ways. A passage from Webern is examined in connection with a combined pitch-and-rhythm GIS constructed in one such way. Generalized analogs of transposition and inversion operations are explored. So are "interval-preserving operations"; these coincide with transpositions in some GIS models but not in others, specifically not in GISs that are "non-commutative." The bulk of chapter 4 explores one non-commutative GIS of musical interest. The elements of the system are formal time-spans. Extended discussion of a passage from Carter's First Quartet demonstrates the pertinence of this GIS to exploring music in which there are functional measured relations among time spans, but no one overriding time span that acts as a unit to measure all others. After that, chapter 4 presents two examples of timbral GISs, and ends with a methodological note on the relations of music theory, perception, and the intuitions of a listener. Some motivic work by Chopin is considered in this connection. Chapter 5 begins a study of generalized set theory, that is, the interrelationships among finite sets of objects in musical spaces. The first construction studied is the Interval Function between sets X and Y; this function assigns to each interval i in a GIS the number of ways i can be spanned between a member of X and a member of Y. Then the Embedding Number of X in Y is studied; this is the number of distinct forms of X that are subsets of Y. To study that number, we have to establish what we mean by a "form" of the set X, a notion that involves stipulating a Canonical Group of operations. Both the Interval Function and the Embedding Number generalize Forte's Interval Vector. Passages from Webern, Chopin, and Brahms illustrate applications of the constructs. Chapter 6 continues the study of set theory, generalizing the work of chapter 5 even farther. The basic construction is now the Injection Function: Given a space S, finite subsets X and Y of S, and a transformation f mapping S into itself, INJ(X, Y) (f) counts how many members of X are mapped by f into members of Y. This number is meaningful even when S does not have a GIS structure, and even when the transformation f js not so well behaved as are
Introduction
transpositions, inversions, and the like. Passages from Schoenberg and from Babbitt are studied by way of illustration. Instead of starting with a GIS and deriving certain characteristic transformations therefrom, it is possible to start with a family of characteristic transformations on a musical space and derive a GIS structure therefrom. That is, instead of regarding the i-arrow on figure 0.1 as a measurement of extension between points s and t observed passively "out there" in a Cartesian res extensa, one can regard the situation actively, like a singer, player, or composer, thinking: "I am at s; what characteristic transformation do I perform in order to arrive at t?" Chapter 7 explores this conceptual interrelation between interval-as-extension and transposition-as-characteristicmotion-through-space. After developing the mathematics that shows a logical equivalence between GIS structures and certain structures of transformations on spaces, the work proceeds by example. Passages from Schoenberg, Wagner, Brahms, and Beethoven indicate how suggestive it can be to consider networks of "intervals" and networks of "transpositions" (modulations, and so forth) as various aspects of the same basic phenomenon. The morphology of such networks can be carried over to that of networks involving other sorts of transformations. Chapter 8 studies networks involving transformations of Klangs in the sense of Riemann, networks involving serial transformations of various sorts, and networks involving inversional transformations. The Beethoven example from chapter 7 is reconsidered, and there are further examples from Wagner, Webern, and Bach. Chapter 9 develops the formalities of transformation networks in a rigorous way. The structure of a network allows us to assign a formal "input" function to some things and a formal "output" function to other things; these functions seem of considerable musical interest in some cases. The networks have intrinsic rhythmic properties which can also be studied formally. Network structure can accommodate hierarchic levels in a quasi-Schenkerian setting, as an example shows. Chapter 10 applies the network concept in a variety of ways to passages from Mozart, Bartok, Prokofieff, and Debussy.
Note on Musical Terminology All references to specific pitches in this book will be made according to the notation suggested by the Acoustical Society of America: The pitch class is symbolized by an upper-case letter and its specific octave placement by a number following the letter. An octave number refers to pitches from a given C through the B a major seventh above it. Cello C is C2, viola C is C3, middle C is C4, and so on. Any B# gets the same octave number as the B just below it; thus B#3 is enharmonically C4. Likewise, any Cb gets the same octave number as the C just above it; thus Q?4 is enharmonically B3.
xxxi
This page intentionally left blank
1
Mathematical
Preliminaries
A mathematician would begin by saying, "Let S be a set." Unfortunately, music theory today has expropriated the word "set" to denote special musictheoretical things in a few special contexts. So I shall avoid the word here. Instead I shall speak of a "family" or a "collection" of objects or members. When I do so, I mean just what mathematicians mean by a "set." For present purposes, it will be safe to leave the sense of that concept to the reader's intuition. 1.1 DEFINITION: Let S and S' be families of objects. The Cartesian product S x S' is the family of all ordered pairs (s, s') such that s is a member of S and s' is a member of S'. 1.2.1 DEFINITION: A function or mapping from S into S' is a subfamily f of S x S' which has this property: Given any s in S, there is exactly one pair (s, s') within the family f which has the given s as the first entry of the pair. We say that s', in this situation, is the value of the function f for the argument s; we shall write f (s) = s'. If we think of fas a table, listing members of S (arguments) in a column on the left and corresponding members of S' (values) in a column on the right, then the defining property for functionhood stipulates that each member of S appear once and only once in the left-hand column. (Some members of S' may appear more than once in the right-hand column. Some members of S' may not appear at all in the right-hand column.)
1
1.2.2
Mathematical Preliminaries
1.2.2 DEFINITION: Given families S and S', we shall say that the functions f and g from S into S' are the same, writing f = g, if f and g are the same subsets of S x S', that is if they produce the same table. This special definition of functional equality is worth stressing. We shall soon see why. 1.2.3 DEFINITION: Let f be a function from S into S', and let f' be a function from S' into S". Then the composition function f'f is defined from S into S" as follows: Given an argument s in S, the value (f'f)(s) is f'(f(s)). 1.2.4 Let me draw special attention to the orthographic convention whereby f' appears to the left of fin the notation for the composition function f'f. That convention follows logically from another orthographic convention, the convention of writing the function name to the left of the argument in the expression "f (s)." The reader is no doubt used to this convention. One can read "f (s)" as "the resulting value, when function f is applied to argument s." Then "f'f(s)" is "the result when f is applied to the result of applying f to s." These conventions will be called left (functional) orthography. Right functional orthography is preferred by some mathematicians for all contexts and by most mathematicians for some contexts. In right orthography, one writes "sf" or "(s)f" for "the operand s, transformed by the function f." This value is what was written "f(s)" in left orthography. The composition function which we called "f'f" in left orthography is called "ff " in right orthography, so as to be consistent: "(s)ff'" in right orthography is "s-transformed-by-f, all transformed by f'." This is what was notated "f f (s)" in left orthography. In the following work we shall use left orthography almost exclusively. We shall use right orthography only once, when its intuitive pertinence seems overwhelming. At that point in the text, the reader will be reminded of this discussion. Right orthography would abstractly be more suitable for our eventual purposes, but the reader's presumed familiarity with left orthography seemed decisive to me in making my choice.
2
1.2.5 Suppose that f t and f 2 are functions from S to S'; suppose that f{ and f'2 are functions from S' to S"; suppose that f" is a function from S to S". We can consider the truth or falsity of functional equations like f^ = f", fif t = f 2 f 2 , and so on. Our discussion of "functional equality" in 1.2.2 tells us how to understand these equations, in evaluating their truth or falsity. The first equation above asserts, "for any sample s, the result of applying f[ to ^(s) is the same as the result of applying f" to the given s." The second equation above asserts, "for any sample s, applying f{ to f^ (s) yields the same result as applying f 2 to f2(s)."
Mathematical Preliminaries
1.3.1
For an example, let us take S, S', and S" all to be the family of positive integers. Let f^s) = s + 3, f{(s) = 2s, f2(s) = 2s, and f^s) = s + 6. The four specified functions satisfy the functional equation f'1f1= f^. That is, given any integer s, if we compute fjfi(s), multiplying by two the result of adding 3 to s, we obtain the same net result as we do when we compute f^Cs), adding 6 to the result of multiplying s by two. For another example, let us take S, S', and S" all to be the family of the twelve pitch-classes. Let f(s) = s transposed by 2, f(s) = s inverted with respect to the pitch class C, and f"(s) = s inverted with respect to the pitch class B. The three specified functions satisfy the functional equation f'f = f". That is, given any pitch class s, if we compute f T(s), inverting about C the result of transposing s by 2, we obtain the same net result as we do when we compute f"(s), inverting the given s about B. 1.2.6.1 DEFINITION: The function f from S into S' is onto S' if every member of S' is the value of some argument. (Every member of S' appears at least once in the right-hand column of the function table.) 1.2.6.2 DEFINITION: The function f from S into S' is 1-to-l if no two distinct arguments share the same value. (No member of S' appears more than once in the right-hand column of the function table.) 1.2.6.3 DEFINITION: Let f be a 1-to-l function from S onto S'. Then f"1, the inverse function off, is defined as the family of pairs (s', s) within S' x S such that (s, s') is a member of f. 1.2.6.4 THEOREMS: Given the situation as in 1.2.6.3 above, then f ~* is indeed a function in the sense of 1.2.1. f - 1 is in fact a 1-to-l function from S' onto S. The inverse function off" 1 is, of course, f. The theorems are stated without proof. 1.2.6.5 THEOREM: Let f and f' be functions from S into S' and from S' into S respectively. Suppose that the functions satisfy the two conditions (A) and (B) following. (A): for every s in S, f'f(s) = s. (B): for every s' in S', ff'(s') = s'. Then f and f' are both 1 -to-1; they are respectively onto S' and onto S; and they are inverse functions, each of the other. The theorem is given without proof. 1.3.1 DEFINITION: A function from a family S into S itself will be called a transformation on S. If the function is 1-to-l and onto, it will be called an operation on S.
3
1.3.2
Mathematical Preliminaries
1.3.2 DEFINITION: Given a family S, a collection F of transformations on S is called closed if, given any members f and g of F, the composition fg is a member of F. A closed collection of transformations on S will also be called a semigroup of transformations on S. 1.3.3.1 DEFINITION: The identity operation on a family S is that operation 1 on S which assigns the value 1 (s) = s to any argument s. 1.3.3.2 THEOREM: For any transformation f on S, the functional equations If = f and fl = fare true (in the sense of 1.2.5 above). 1.3.3.3 THEOREM: A transformation f on S is an operation (i.e., 1-to-l and onto) if and only if there exists a transformation f on S satisfying the functional equations f T = 1; ff' = 1. If this be the case then f' is the inverse operation of f. The theorem follows from the various matters studied over section 1.2.6. 1.3.4 DEFINITION: By a group of operations on S we shall mean a family (i.e. collection) G of transformations on S which satisfies conditions (A) and (B) following. (A): G is a closed family, a semigroup of transformations in the sense of 1.3.2. (B): Given any member f of G, there exists a member f of G satisfying f'f = ff = 1. Condition (B) guarantees that the members of G are indeed operations, via 1.3.3.3. (B) also guarantees that G contains the inverse operation for each of its member operations. (A) and (B) together imply that G contains the identity operation 1, provided that G contains any members. Whether we call G a "collection" or a "family" is immaterial; for us the terms are synonymous with each other as they also are with the terms "ensemble" and "set-in-themathematical-sense."
4
1.3.5 The work of section 1.3 so far has explored certain algebraic behavior characteristic of transformations on S. The transformations compose one with another, f with g to form the transformation fg. There is an identity transformation 1, which composes left or right with any f to yield f itself: If = fl = f. Certain transformations, the operations, have inverses; if f is such then f"1 is characterized by the algebraic relations f -1 f = ff" 1 = 1. These algebraic features of the situation are abstracted and generalized by the study of "abstract" semigroups and groups, a study we shall shortly commence. Before we do so, we should note one more aspect of transformation algebra which the abstract study will generalize. This is the associativity
Mathematical Preliminaries
1.5.1
of transformational composition. That is, the composition of transformations obeys the Associative Law f(gh) = (fg)h: Given any sample s, the result of applying f to the (gh)-transform of s is the same as the result of applying (fg) to the h-transform of the given s. 1.4 Now we begin the abstract study. We fix a family (i.e. collection) X of abstract objects x, y, z,..., and develop abstract algebraic systems that model the behavior of transformational algebra. First we must specify how the objects of X are to "compose" one with another. 1.4.1 DEFINITION: A binary composition on X is a function BIN that maps X x X into X. We write BIN(x, y) for the value of BIN on the pair (x, y). 1.4.2 DEFINITION: A binary composition on X is associative if BIN(x, BIN(y, z)) = BIN(BIN(x, y), z) for all x, y, and z. A familiar non-associative binary composition on the natural numbers is exponentiation: BIN(x, y) = x-to-the-y-power. For example BIN(3, BIN (2,3)) = 3-to-the-(2-cubed)-power, or 3-to-the-eighth-power, while BIN(BIN(3,2), 3) = (3-squared)-to-the-third-power, or 9-cubed. Nine-cubed is 3-to-the-sixth, not 3-to-the-eighth. 1.4.3 DEFINITION: A semigroup is an ordered pair (X, BIN) comprising a family X and an associative binary composition BIN on X. It is traditional to write the binary composition for a semigroup using multiplicative notation when there is no reason to use some specific other notation. Thus we shall generally write "xy" to signify BIN(x, y) in a semigroup, failing some reason to write "x + y" or "x * y" and the like. The Associative Law for BIN then reads "x(yz) = (xy)z." This notational convention simplifies the look of the page. It is important, though, not to carry over into our general study intuitions about numerical multiplication which may not be valid within a specific semigroup at hand. It is also important to remember that in order to define a particular semigroup, we must specify not only the family X of elements but also the composition BIN under which the elements combine. Despite this, it is customary to refer (improperly) to "the semigroup X" when the binary composition is clearly understood in a given context. 1.5.1 DEFINITION: A left identity for a semigroup is an element 1 such that for every x, Ix = x. A right identity is defined dually: For every x, xr = x. An identity is an element e which is both a left identity and a right identity.
5
7.5.2
Mathematical Preliminaries
1.5.2 THEOREM: If a semigroup has both a left identity 1 and a right identity r, then 1 and r must be equal. Hence there can be at most one identity for a semigroup. If a semigroup has one, we can therefore speak of "the" identity element. Proof:lr must equal r since 1 is a left identity. Ir must also equal 1 since r is a right identity. There are, incidentally, semigroups that have an infinite number of left identities. (By the theorem above, a semigroup that has more than one left identity cannot have any right identities.) There are, in fact, both finite and infinite semigroups in which every element is a left identity. To illustrate this, take any family X and define on X the composition BIN(x, y) = y for all x and all y; (X, BIN) is such a semigroup. 1.6.1 DEFINITION: Given a semigroup with identity e; given an element x, a left inverse for x is an element 1 satisfying Ix = e. A right inverse for x is an element r satisfying xr = e. An inverse for x is an x' which is both a left inverse and a right inverse. 1.6.2 THEOREM: If an element x of a semigroup with identity has both a left inverse 1 and a right inverse r, then 1 = r. Hence x can have at most one inverse. If x has one, we can therefore call it "the" inverse of x. Proof:1 = le = l(xr) = (lx)r = er = r. 1.6.3 In multiplicative notation for a semigroup with identity, the inverse of an element x that has one is denoted x"1. 1.7 DEFINITION: A group is a semigroup with identity in which every element has an, inverse. The abstract definitions of "semigroup" and "group" (1.4.3; 1.7) are consistent with the earlier use of those terms in connection with families of transformations (1.3.2; 1.3.4). 1.8.1 DEFINITION: Given a binary composition BIN on a family X, elements x and y commute if BIN(y, x) = BIN(x, y), that is, if yx = xy in multiplicative notation. The composition BIN is commutative if every pair of elements commutes. A semigroup or group is commutative if its binary composition is commutative.
6
The group of transposition and inversion operations on the twelve pitchclasses is non-commutative. To illustrate this, let T2 be the operation of
Mathematical Preliminaries
1.9.2
transposing-by-2; let I, J, and K be the respective operations of invertingabout-C, inverting-about-B, and inverting-about-Cft. Then, as we observed earlier, IT2 = J (1.2.5). On the other hand, T2I = K. Thus the operations T2 and I do not commute. (Remember that we are using left orthography. "IT2 = J" means: "Given any sample pitch-class s, if you invert-about-C the 2-transpose of s, you will obtain the inversion-about-B of the given s." "T2I = K" means: "Given any sample pitch-class s, if you transpose-by-2 the inversion-about-C of s, you will obtain the inversion-about-C# of the given s.") 1.8.2 DEFINITION: Given a binary composition BIN on a family X, an element c of X is central if c commutes with every x in X. The family of all central c is the center of the system (X, BIN). 1.9 In this section we shall develop the conceptual structure and terminology for equivalence relations on a family S (not necessarily a semigroup). We shall see in particular how the notion of an equivalence relation is intimately connected with the idea of mapping S onto another family S' by some function f. 1.9.1 DEFINITION: Given a family S, an equivalence relation on S is a subfamily EQUIV of S x S that satisfies conditions (A), (B), and (C) following. (A): For every s in S, (s, s) is in EQUIV. (B): If (s, t) is in EQUIV, then so is (t, s). (C): If (r, s) and (s, t) are in EQUIV, then so is (r, t). The three conditions are called the "reflexive," "symmetric," and "transitive" properties of the relation. The conditions express formally some of our intuitions about things that are "equivalent." (A) matches our intuition that any object s should be equivalent to itself. (B) matches our intuition that if s is equivalent to t, then t should be equivalent to s. (C) matches our intuition that if r is equivalent to s and s is equivalent to t, then r should be equivalent to t. 1.9.2 THEOREM: Let f be a function from S onto S'. Define a relation EQUIV on S by putting the pair (s, t) in the relation if and only if f (s) = f (t). Then EQUIV is an equivalence relation. Proof: (A) f (s) = f (s), so (s, s) is in the defined relation. (B) If (s, t) is in the defined relation, f (s) = f (t). Then f (t) = f (s), so that (t, s) is in the defined relation. (C) If f(r) = f(s) and f(s) = f(t) then f(r) = f(t). We shall see soon that every equivalence relation on S can be regarded as being generated in precisely the above fashion, for some suitable choice of S' andf.
7
1.9.3
Mathematical Preliminaries
1.9.3 THEOREM: Let EQUIV be an equivalence relation on a family S. For each s in S let E(s) be the subfamily of S comprising exactly those members of S which are in the EQUIV relation to s, i.e. those t such that (s, t) is in the EQUIV relation. Then, giveu any s and any t in S, either (A) or (B) below will be true. (A): s and t are equivalent; E(s) and E(t) are the same collection. (B): s and t are not equivalent; E(s) and E(t) are disjoint (have no common member). Proof: Suppose first that s and t are equivalent. Then, by the symmetric and transitive laws, r is equivalent to s if and only if r is equivalent to t. In other words, r is a member of E(s) if and only if r is a member of E(t). Thus E(s) and E(t) are the same collection. (A) of the theorem obtains. Now suppose that s and t are not equivalent. Then there can be no r which is both a member of E(s) and a member of E(t). For if there were such an r, then r would be equivalent to both s and t; by the symmetric and transitive laws, we could infer that s was equivalent to t, which we have supposed is not the case. Thus E(s) and E(t) are disjoint. (B) of the theorem obtains, q.e.d. 1.9.4 By virtue of Theorem 1.9.3, an equivalence relation partitions S into the set-theoretic union of mutually disjoint subfamilies E^,.. .,En,... These subfamilies are called the equivalence classes of the relation. For each s in S, there is precisely one equivalence class En to which s belongs, s is a member of the class En if and only if En = E(s), where E(s) is the family defined in 1.9.3, the family of objects equivalent to s. Indeed, it would be possible to define any equivalence relation by partitioning S into mutually disjoint subfamilies S l f ..., S n , ... One could then define the pair (s, t) to be in a relation REL if both s and t lie in the same subfamily of the partition. One could show that REL is an equivalence relation, and that the members S j , . . . , S n ,... of the given partition are exactly the equivalence classes for that equivalence relation. 1.9.5 DEFINITION: Given an equivalence relation EQUIV on a family S, the family of equivalence classes is called the quotient family of S modulo EQUIV. We shall denote it symbolically by S/EQUIV. The function E of 1.9.3 maps S onto S/EQUIV, mapping each argument s to the value E(s), the member of the quotient family that contains s. The function E is called the natural map of S onto S/EQUIV.
8
We may now regard every equivalence relation as potentially generated in the manner of 1.9.2. Given EQUIV on S, take S' = S/EQUIV and take f = E, the natural map of S onto S'. s and t are then equivalent under the given relation if and only if f (s) = f (t).
Mathematical Preliminaries
1.9.7
1.9.6.1 EXAMPLE: Let S be the family of all pitches under twelve-tone equal temperament. Define EQUIV by putting (s, t) in EQUIV if s and t have the same letter name, give or take enharmonic equivalence. The quotient family S/EQUIV comprises the twelve pitch classes. The natural map E takes each pitch s into its pitch class E(s). 1.9.6.2 EXAMPLE: Let S be the family of all beats in a certain waltz. Define a function f from S into the numbers 1,2, and 3: f (s) = 1 if s is the first beat of its measure; f(s) = 2 if s is the second beat of its measure; f(s) = 3 if s is the third beat of its measure. A dancing master might construct this function by calling "one-two-three," over and over again as the beats go by. The function f induces an equivalence relation on S by the method of 1.9.2: s and t are EQUIValent if they share the same f-value. The three equivalence classes can be called the "beat classes" of the relation; they comprise the first beats, the second beats, and the third beats of the waltz. 1.9.6.3 EXAMPLE: Let S be the family of all collections of pitch classes. Put the pair (s, t) into the relation SAMETYPE if the collection t is a transposed or inverted form of the collection s. (Transposition-by-zero is considered a formal transposition here.) SAMETYPE is an equivalence relation. The equivalence classes are Forte's set-types.1 The class 3-11, in Forte's nomenclature, contains the twenty-four major and minor triads. The class 3-12 contains the four augmented triads. And so on. 1.9.7 OPTIONAL: This section of the work is for those who are curious to explore the material in a bit more depth. Given a function f from S onto S', define EQUIV as in 1.9.2; i.e. put (s, t) into the EQUIV relation if and only if f(s) = f(t). Given any member s' of S'; since f is onto, there is some s in S satisfying f(s) = s'. The family of all s satisfying f(s) = s' is an equivalence class En; En contains just those arguments for f having the given s' as their f-value. We write En = ARGS(s'). ARCS is a function from S' into S/EQUIV. ARGS maps S' onto S/EQUIV: Given any equivalence class En, let s be a member of En and let s' = f(s); then ARGS(s') = En; the given En is an ARGS-value. The function ARGS is also 1-to-l: If s' and t' are distinct members of S', then the equivalence class ARGS(s'), comprising those s such that f(s) = s', is obviously different from the equivalence class ARGS(t'), comprising those t such that f (t) = t'. By the method of its construction above, the function ARGS satisfies 1. Allen Forte, The Structure of Atonal Music (New Haven and London: Yale University Press, 1973).
9
1.10
Mathematical Preliminaries
formula (A) below. (A): ARGS(f (s)) = E(s)
for all s in S.
We have observed that the function ARGS is 1-to-l and onto. Hence it has an inverse function, which we shall call f/EQUIV. ARGS maps S' 1-to-l onto S/EQUIV as in formula (A) above. f/EQUIV maps S/EQUIV 1-to-l onto S'. Applying f/EQUIV to both sides of formula (A), we obtain formula (B). (B): f (s) = (f/EQUIV) (E(s)) for all s in S. f/EQUIV is called the induced map on S/EQUIV. While f may map many of its arguments onto the single value f (s) in S', f/EQUIV maps exactly one of its arguments onto that value. Via formulas (A) and (B), the mutually inverse functions ARGS and f/EQUIV set up a 1-to-l correspondence between the members f (s) of the image family S' and the members E(s) of the quotient family S/EQUIV, the family of equivalence classes. 1.10 When we shift our attention from an arbitrary family S to a semigroup (X, BIN), certain sorts of equivalence relations on X are of special interest because of the ways they interact with the algebraic structure of the semigroup. We shall study here some special equivalence relations called congruences. They interrelate with special sorts of functions on semigroups, functions called homomorphisms. Homomorphisms map semigroups one into another in a special way that engages algebraic structure. 1.10.1 DEFINITION: An equivalence relation on a semigroup is a congruence if it has this property: Given xt equivalent to y x and x2 equivalent to y 2 , then \1x2 is equivalent to y^a1.10.2 THEOREM: Given a congruence on a semigroup, let C^ and C2 be any congruence classes (equivalence classes for the congruence). Then there is a unique congruence class C3 such that whenever X A and x2 are members of C t and C2 respectively, the composition x t x 2 is a member of C3. Proof: Take any specimen y: in Q and any specimen y 2 in C 2 . Let C3 be the congruence class containing y^. C3 is the class whose existence the theorem asserts. To see this, suppose that x t and x 2 are any members of C x and C 2 respectively. Since Xj is congruent to y : and x 2 is congruent to y 2 , x t x 2 will be equivalent to y^ (1.10.1). Hence XjX 2 will lie within the same congruence class as y x y 2 . That is, x x x 2 will lie within the constructed C3. q.e.d.
w
1.10.3 THEOREM: Let CONG be a congruence on the semigroup (X, BIN). Then the quotient family X/CONG (i.e. the family of congruence classes) becomes a semigroup itself under the binary composition BIN/CONG defined as follows. Given congruence classes Cj and C2 (members of X/CONG),
Mathematical Preliminaries
J.JO.4.2
the composition (BIN/CONG) (C 1 ,C 2 ) is the congruence class C3 of Theorem 1.10.2, that is the unique congruence class which contains BIN(x 1 ,x 2 ) whenever x1 belongs to C t and x2 belongs to C 2 . Sketch of proof: The heart of the theorem is that the binary composition BIN/CONG is well defined. Given Cj and C 2 , the value of C3 does not depend at all on the specimen \v and x2 we may select to represent C t and C2. C3 depends only upon the classes C1 and C2 themselves. Having noted that, it is not hard to prove that BIN/CONG is associative. 1.10.4.1 EXAMPLE: Let (X, BIN) be the group of all integers, positive, negative, or zero, under addition. Define a relation CONG: the pair of integers (x, y) is in this relation if the difference y — x is an integral multiple of 12. CONG is reflexive: (x, x) is in the relation since x — x = 0 = 0-times-12 is an integral multiple of 12. CONG is symmetric: If (x,y) is in the relation, then there is some integer n such that y — x = n-times-12; then there is some integer m such that x — y = m-times-12 (take m = — n); then (y, x) is in the relation. CONG is transitive: If y — x = m-times-12 and z — y = n-times-12, then z — x = (z — y) + (y — x) = (n + m)-times-12. So CONG is an equivalence relation. It is in fact a congruence, for it satisfies the requirement of 1.10.1: If y t — x t is a multiple of 12 and y2 — x2 is a multiple of 12, then (yt + y 2 ) — (xj + x 2 ) is a multiple of 12. We write C(x) for the congruence class containing x. Since C(x) = C(xplus-or-minus-any-multiple-of-12), every congruence class is one of the twelve classes C(0), C(l), ..., C(ll). The quotient semigroup, then, contains just those twelve members. For each i between 0 and 11 inclusive, the class C(i) contains exactly those integers that can be written as i-plus-some-multiple-of12. Composition of the twelve congruence classes within the quotient semigroup follows the rule of addition modulo 12. That is, C(i) + C(j) = C(i + j) if i + j is less than 12; otherwise C(i) + C(j) = C(i + j - 12). Thus C(5) + C(8) = C(l). According to 1.10.2, we can read this as stating correctly: "Any number divisible by 12 with a remainder of 5, added to any number divisible by 12 with a remainder of 8, produces some number divisible by 12 with a remainder of 1." The equation "C(5) + C(8) = C(l)" in the above context is customarily abbreviated: "5 + 8 = 1 (mod 12)." The quotient semigroup is called "the integers modulo 12." It is in fact a group. We shall see later that the quotient semigroup of any group must itself be a group. If we replace the modulus 12 in the above construction by an arbitrary integer N greater than 1, we obtain "the integers modulo N" as a quotient group. 1.10.4.2 EXAMPLE: Let (X, BIN) be the group of all rational numbers that can be expressed as x = 2a3b5c, where a, b, and c are integers (positive, negative, or zero); BIN is multiplication. We can consider these numbers to model all possible ratios of pitches in just intonation.
11
1.11
Mathematical Preliminaries
Define a relation CONG: The pair (x, y) is in this relation if the number y is some power of 2 (positive, negative, or zero) times the number x. In our intervallic model, this will be the case when the intervals x and y differ by some number of octaves. For example, any one of the numbers 12/5, 6/5, 3/5, and 3/10 is in this relation to itself or to any other one. The four numbers model the four intervals of a minor tenth up, a minor third up, a major sixth down, and a major thirteenth down. As an exercise, using the procedure of 1.10.4.1 as a guide, the reader may verify that CONG is a congruence. (Remember to verify first that it is an equivalence relation!) The quotient group models all pitch-class intervals in just intonation. That is, each congruence class consists of one interval, give or take any number of octaves. Mathematically, C(x) = C(2x) = C(4x) = • • • = C(x/2) = C(x/4) = . . From this, it can be proved: Given any x, there is a unique member x' of C(x) which lies between 1 (inclusive) and 2 (exclusive). In this way, the members x' of X that lie between 1 and 2 provide a plausible system of labels for the congruence classes C(x'). (The various pitch-intervals between the unison and the rising octave can be used to label the various intervals-modulo-theoctave.) It can also be proved: Given any x, there is a unique member x" of C(x) which can be expressed as x" = 3b5c. So the numbers x" that have factors of 3 and 5 only in their rational expressions provide another plausible system of labels for the congruence classes C(x"). (x" = 3b5c labels the pitch-class interval of "b dominants and c mediants, modulo the octave.") 1.11 When we studied an equivalence relation on a family S, we made a number of observations about the natural map E, the function that maps each element s of S into the equivalence class E(s) of which s is a member. When the family S is a semigroup X and the equivalence relation is a congruence, we shall replace the name "E" of this natural map by the name "C": C maps each element x of the semigroup X into the congruence class C(x) of which x is a member. We have already used this nomenclature in examples 1.10.4.1 and 1.10.4.2 above. Everything that we observed earlier about the natural map E (1.9.3,1.9.4, 1.9.5,1.9.7) is true for the natural map C, which is only a special notation for E in the particular event that S is a semigroup and the equivalence relation is a congruence. Beyond that, C has special properties that engage the algebraic structure of the semigroup X and the quotient semigroup X/CONG. Specifically, the natural map C of X onto X/CONG satisfies law (A) below. (A): C(x!)C(x2) = C(XiX 2 ) for all x x and x 2 . 72
Indeed we defined the binary composition "C(x1)C(x2)" in X/CONG
Mathematical Preliminaries
1.11.3
precisely so as to satisfy this law. That was the work of 1.10.2 and 1.10.3. Mathematicians express property (A) above by saying, "C is a homomorphism of X onto X/CONG." The crucial term "homomorphism" is defined in 1.11.1 below. 1.11.1 DEFINITION: A function f from a semigroup (X, BIN) into a semigroup (X', BIN') is a homomorphism if it satisfies the law: BIN'(f( Xl ),f(x 2 )) = f(BIN( Xl ,x 2 )) for all Xi and all x2 in X. One can express this law colloquially by saying, "The combination of the images is the image of the combination." Using multiplicative notation for both semigroups, the law looks simpler: f( Xl )f(x 2 ) = f( Xl x 2 ). Certain sorts of homomorphisms are of special interest. 1.11.2 DEFINITION: A homomorphism is an isomorphism (into) if it is 1 -to-1 If f is an isomorphism of (X, BIN) onto (X', BIN'), we say the two semigroups are isomorphic (via f). In that case the inverse map f -1 is an isomorphism of (X', BIN') onto (X, BIN). 1.11.3 OPTIONAL: Let f be a homomorphism of a semigroup (X, BIN) onto a semigroup (X', BIN'). We have already seen (in 1.9.2) that an equivalence relation is defined if we select as equivalent just those pairs (x, y) satisfying f (x) = f (y). We can show that the relation in this case is in fact a congruence CONG. From earlier work (1.9.7) we know that the mapping ARGS of X' into X/CONG is 1-to-l and onto. (ARGS(x') is the congruence class comprising exactly those x such that f (x) = x'.) In this case, f being a homomorphism, we can show that ARGS is a homomorphism of the semigroup (X', BIN') into the quotient semigroup (X, BIN)/CONG. Here is a sketch for the proof of that. We want to show that for all \l and for allx 2 ,ARGS(f(x 1 ))ARGS(f(x 2 )) = ARGS(f(x1)f(x2)). In this equation, the symbolic product of the two ARGS-values on the left means the binary composition of those values in the quotient semigroup; the symbolic product f(Xi)f(x 2 ) within the equation means the binary composition of those two f-values in the semigroup (X',BIN'). Now f(x t )f(x 2 ) = f(x 1 x 2 ), since f is a homomorphism, and ARGS (f (any thing)) = C(that thing), as per 1.9.7(A). Hence the equation we have to show reduces to the equation C(x1)C(x2) = C(\1x2). And the latter equation is indeed true, since CONG is a congruence (1.11 (A)). Since ARGS is 1-to-l, onto, and a homomorphism, it is an isomorphism of the two semigroups (X', BIN') and (X, BIN)/CONG. Colloquially speak-
13
1.11.4
Mathematical Preliminaries
ing, we can say that the image semigroup is isomorphic with the quotient semigroup in this context. f/CONG, the inverse map of ARGS, the induced map of the quotient semigroup onto the image semigroup, is therefore also an isomorphism. This is very significant. It means that any homomorphic image (X', BIN') of a semigroup (X, BIN) "is essentially" some quotient semigroup of (X, BIN), and the generic homomorphism f of (X, BIN) onto that image "is essentially" the natural map of (X, BIN) onto that quotient. The words "is essentially" here must be interpreted with some care. They express the idea of identification up to within isomorphism of the image semigroups. With that understanding, we can say that it suffices to study the possible congruence relations on (X, BIN), in order to know all possible homomorphisms which can map (X, BIN) onto other semigroups, and all possible other semigroups which are homomorphic images of (X, BIN). 1.11.4 One more term should be introduced here. An anti-homomorphism of one semigroup into another is a function f satisfying f(x!)f(x 2 ) = f^x^. Given a semigroup (X, BIN) we can define another binary composition ANTIBIN on the family X: ANTIBIN (x l 5 x 2 ) = BIN(x 2 ,x 1 ). ANTIBIN is associative, so (X, ANTIBIN) is a semigroup. (X, ANTIBIN) is antiisomorphic to (X, BIN) under the map f (x) = x. In the obvious sense, every anti-homomorphism of (X, BIN) is a homomorphism of (X, ANTIBIN) and vice-versa. Thus we will not normally have to concern ourselves with antihomomorphisms. We will only have to do so when we have to deal with both homomorphisms and anti-homomorphisms of the same semigroup at the same time. Such a situation will in fact arise later on. We shall be studying a certain group whose elements are i, j, k ...; we shall also be studying various families of transformations on a certain family of objects. One such family will be called "transpositions"; for each i there will be a corresponding transpositionoperation TJ. Another such family will be called "interval-preserving operations"; for each i there will be a corresponding interval-preserving operation PJ. The P-operations will combine according to the rule PjPj = P^; the Toperations will combine according to the rule T;Tj = T^. The map of i to P; will be an isomorphism, while the map of i to T, will be an anti-isomorphism of the same group. In such a situation we must perforce deal with the concept of antihomomorphism. We could change BIN to ANTIBIN in the index group i, j, k . . . so as to make the mapping of i to Tj an isomorphism, but then the mapping of i to PJ would become an anti-isomorphism. Using right orthography for the operations T; and P; would have the same effect. 14
1.12.1 THEOREM: Let f be a homomorphism of the semigroup (X, BIN) onto the semigroup (X', BIN'). If e is an identity for (X, BIN) then f (e) is an identity
Mathematical Preliminaries
1.13
for (X', BIN'). In that case, if x has an inverse x * in (X, BIN) then f(x-1) is an inverse for f(x) in (X', BIN'). Proof: f(e)f(x) = f(ex) = f(x); f(x)f(e) = f(xe) = f(x). Thus f(e) is an identity for the family of all f(x). Since f is onto, every member of X' can be written as the value f (x) of some argument x. Hence f (e) is an identity for all of X'. If x has an inverse then f(x -1 )f(x) = f(x-1x) = f(e) = the identity in X'; likewise f(x)f(x-1) is the identity in X'. So f(x-1) is the inverse in X' for f(x). Thatis, f(x~ 1 ) = (f(x)r1. 1.12.2 THEOREM: A homomorphic image of a group is a group. The theorem follows at once from 1.12.1. 1.12.3 THEOREM: Any quotient semigroup of a group is a group. The theorem follows from 1.12.2, since the natural map of the given group onto its quotient semigroup is a homomorphism (1.11 (A)). The quotient construction is one common way to derive new semigroups or groups from old. Another way is to form "direct products" as sketched below. 1.13 Let SGPi = (X t , BINO and SGP2 = (X2, BIN2) be semigroups. The direct product of SGPj and SGP2 is a semigroup SGP3 = (X3,BIN3) constructed as follows. X3 is the Cartesian product Xt x X 2 . Given (x ls x 2 ) and (y1}y2) in X3, BIN3((xl5x2), (y l5 y 2 )) is defined as the element (BIN^x^yj), BIN 2 (x 2 ,y 2 )) of X3. In multiplicative notation, (Xi,x 2 )(y 1 ,y 2 ) is defined = (x 1 y 1 ,x 2 y 2 ). BIN3 as defined is associative, so that SGP3 is indeed a semigroup. To symbolize that SGP3 is the direct product of SCPj and SGP2 we write SGP3 = SGP 1 ®SGP 2 . If ej and e2 are identities for SGPj and SGP2, then e3 = (e ls e 2 ) is an identity for SGP3. If xl in Xt and x2 in X2 have inverses in their respective semigroups, then (x^SxJ 1 ) is an inverse for the element (Xj,x 2 ) of SGP3. It follows: If SGPj and SGP2 are both groups, then so is their direct product SGP3.
75
2
Generalized Interval Systems (1): Preliminary Examples and Definition
In conceptualizing a particular musical space, it often happens that we conceptualize along with it, as one of its characteristic textural features, a family of directed measurements, distances, or motions of some sort. Contemplating elements s and t of such a musical space, we are characteristically aware of the particular directed measurement, distance, or motion that proceeds "from s to t." Figure 0.1 on page xi earlier symbolized this awareness, using an arrow marked i extending or moving from a point marked s to a point marked t to help us render visible our intuition. When s and t are pitches or pitch classes we are comfortable with the word "interval" as a term to use in connection with the i-arrow. That is why I have decided to keep using the word "interval" when generalizing our intuitions about the i-arrow to musical spaces whose objects s, t, and the like are not necessarily pitches or pitch classes. It will be helpful to explore some specific musical spaces informally in this connection, before proceeding more formally later on. "int(s, t)" will provisionally denote our intuition of a directed measurement or motion behaving like an "interval from s to t." Later on we shall attach a more formal significance to the expression "int(s, t)."
16
2.1.1 EXAMPLE: The musical space is a diatonic gamut of pitches arranged in scalar order. Given pitches s and t, int(s, t) is the number of scale steps one must move in an upwards-oriented sense to get from s to t. Thus int(C4, C4) = 0, int(C4,D4) = 1, int(C4,E4) = 2, and int(C4,C5) = 7. Int(C4,A3) = — 2, since moving " — 2 steps up" amounts to moving 2 steps down. Using these measurements, if we take 2 steps up (e.g. from C4 to E4) and then take 2 more steps up (in this case, from E4 to G4), we have taken 4 steps up in all (in this case, from C4 to G4). Symbolically, int(C4, E4) = 2,
Generalized Interval Systems (1)
2.1.5
int(E4, G4) = 2, int(C4, G4) = 4, and 2 + 2 = 4. The intervallic measurements of the model thus interact effectively with ordinary arithmetic. This obviates a defect in the traditional measurements which tell us, for example, that a "3rd" and another "3rd" compose to form a "5th." (3 + 3 = 5 ???) 2.1.2 EXAMPLE: The musical space is a gamut of chromatic pitches under twelve-tone equal temperament. Given pitches s and t, int(s, t) is the number of semitones one must move in an upwards-oriented sense to get from s to t, not counting s itself. Thus int(C4, D4) = 2, int(C4, G4) = 7, int(C4, C5) = 12, int(C4, F3) = -7, and int(C4, F2) = -19. 2.1.3 EXAMPLE: The musical space comprises the twelve pitch-classes under equal temperament. If we arrange the pitch classes around the face of a clock following the order of a chromatic scale, then int(s, t) is the number of hours that we traverse in proceeding clockwise from s to t. For instance, if s is at 8 o'clock and t is at 1 o'clock, int(s, t) = 5. Note that the number int(s, t) does not depend on which pitch class is positioned at 12 o'clock. In any case, int(E, E) = 0, int(E, F) = 1, and int(F, E) = 11. 2.1.4 EXAMPLE: The musical space comprises seven pitch-classes, corresponding to the seven mode degrees of system 2.1.1. If we wrap the scale around the face of a seven-hour clock, then int(s, t) is the number of hours that we traverse on that clock, in proceeding clockwise from s to t. Thus int(D, D) = 0, int(D, E) = 1, and int(D, C) = 6. We could produce analogs for the linear spaces of examples 2.1.1 and 2.1.2, using other sorts of scales. And, for systems in which octave equivalence is functional, we could derive analogs for the modular spaces of examples 2.1.3 and 2.1.4. For example, we could investigate octatonic-scale space in the manner of 2.1.1 and 2.1.2; we could derive there from a modular space of eight pitch-classes, wrapping the octatonic scale around an eight-hour clock and measuring intervals modulo 8. 2.1.5 EXAMPLE: This musical space, harmonic rather than melodic, comprises pitches available from a given pitch using just intonation. If we write FQ(s) to denote the fundamental frequency of the pitch s, then int(s, t) is the quotient FQ(t)/FQ(s). That quotient will be some number of the form 2a3b5c, where a, b, and c are integers, positive, negative, or zero. It is not immediately clear what intuitions of "distance" or "motion" we are measuring by these intervals. Personally, I am convinced that our intuitions are highly conditioned by cultural factors. In particular, I do not think that the acoustics of harmonically vibrating bodies provide in themselves an adequate basis for grounding those intuitions. For instance, when we
17
2.7.5
Generalized Interval Systems (1)
write int(C4, F#4) = 45/32 (= 2~ 5 32 5), I do not believe that we are intuiting a common partial frequency F#9 for both C4 and F#4, a partial which is intuited forthwith in some harmonic space as both the 32nd partial of F#4 and the 45th partial of C4. Nor do I believe that we intuit a path in harmonic space which corresponds directly to a compound series of individual multiplications and divisions by 2,3, and 5. That is, if we take the 5th partial of the 3rd partial of the 3rd partial of C4, and then find the frequency of which that is the 2nd partial, and then find the frequency of which that is the 2nd partial, continuing on in this way and so arriving eventually at F#4,1 do not believe that the way of getting from C4 to F#4 which we have intellectually reconstructed in harmonic space is in any sense an intuition of distance or gesture being measured by the composite ratio 45/32 = 5 times 3 times 3 divided by 2 divided by 2 and so on. In order to describe an actual harmonic intuition, I would rather proceed as follows. When we hear or imagine the succession C4-F#4 in its own context and try to intuit a harmonic sensation, we intuit a tonic followed by the leading tone of its dominant. And we intuit the secondary leading tone harmonically as the third of a harmony whose root is the dominant of the dominant. Constructing a fundamental bass representative for that root, i.e. some D below the F$4, we will locate that D in register as D3, to keep it completely beneath the "soprano line" C4-F#4. For the same reason, in constructing a fundamental bass for the note G4 that we imagine following F#4 in the soprano, a fundamental bass representing the implicit role of dominant harmony in the context, we will locate the bass G as G3. In this way we intuit the enlarged harmonic context of figure 2.1 (a) from the given stimulus C4-F#4.
FIGURE 2.1
18
The arrows on figure 2.1(b) show the path in harmonic space which I believe we actually intuit in this enlarged context. Starting at C4 as a local tonic, the first arrow takes us to G3, a fundamental bass for the dominant harmony where we hear the implicit enlarged context closing. The second arrow shows G3 inflected by its own dominant immediately preceding; the arrow points to the fundamental bass D3 for that event. The third arrow points to F#3, the major third of the harmony over D3. The fourth arrow points to F#4, the octave above F#3. Collating the entire path, we can retrace it and express it in prose: F#4 lies an octave above the major third of that
Generalized In terval Systems (1)
2.1.5
dominant which lies a fourth below that dominant which lies a fourth below C4. Now we can finally see in what sense the number 45/32 is a valid measurement for some intuition of a characteristic way from C4 to F#4 in harmonic space. We do have clear intuitions for a number of basic harmonic moves; we can measure those moves, and we have intuited (not just constructed) a chain of them. Our belief in the validity of mathematics carries us the rest of the way. Specifically, we intuit clearly the relation "t lies an octave above s," and we accept empirically the measurement FQ(t) = 2FQ(s) as a valid reflection of that intuition. We also intuit clearly the relation "t is the major third of the s harmony," and we accept the measurement FQ(t) = (5/4)FQ(s) as valid in connection with that intuition. Finally, we intuit clearly the relation "t is that dominant which lies a fourth below s," and we accept the measurement FQ(t) = (3/4)FQ(s) as valid in that connection. Applying those basic measurements to the arrows of figure 2.1(b), we get FQ(F#4) = 2FQ(F#3), FQ(F#3) = (5/4)FQ(D3), FQ(D3) = (3/4)FQ(G3), and FQ(G3) = (3/4)FQ(C4). Applying mathematics to this chain of measurements, we infer that the equation FQ(F#4) = 2FQ(F#3) = 2(5/4)FQ(D3) = 2(5/4)(3/4)FQ(G3) = 2(5/4)(3/4)(3/4)FQ(C4) is valid as measuring an intuited chain of intuitions, that is, not simply as an empirical fact. Observe that the number int(C4, F#4) = FQ(F#4)/FQ(C4) = 45/32 arises here not as the product of 2~ 5 and 32 and 5, which is its most "natural" mathematical factorization. Rather, 45/32 arises as the product of the four factors 2, (5/4), (3/4), and (3/4), reflecting its "natural" way of measuring an intuited chain of intuitions in the given situation. I should stress again not only the sophistication and complexity of this system (compared, for example, to the melodic system of example 2.1.1) but also its heavy reliance on cultural conditioning. A brief review of just how the noteheads got onto figure 2.1 will emphasize the point: Cultural conditioning is obviously important in our construction of the extended mental/aural context, given only the acoustical stimulus C4-F#4 and the intent to think/hear "harmonically." That intent, in turn, is itself a cultural phenomenon. Imagine a culture whose members, when they hear the notes of figure 2.1, are able to override the melodic relation of F#4 to the G4 which follows, as a primary structural determinant for a system of music theory that addresses such passages! The amount of time it takes the reader to discover that the last sentence is ironic indicates the greater or lesser extent to which we are all still within the grip of that culture. Then too, our interest in the harmonic system under study depends to a considerable extent on a cultural predilection for harmonically resonating instruments (with one degree of freedom) producing sustained (steady-state) sounds. In fact, much of the traditional theory pertinent to the system was developed under the supposition that the domain of investigation could be
19
2.1.6
Generalized In terval Systems (1)
adequately represented by aspects of one or more stretched strings. Despite its problems, that representation had the great advantage of enabling theorists to connect their intuitions of musical intervals with the measurement of visible, tangible material distances along the strings. This Cartesian modelling of harmonic intervals as res extensae, in a space outside the minds and bodies of the musicians, enabled harmonic theorists of earlier times to avoid having to confront such complex and problematic gestural intuitions as those of figure 2.1.
20
2.1.6 EXAMPLE: The musical space comprises the pitch classes generated by the space of example 2.1.5 above. Given pitch classes s and t, int(s, t) is the ordered pair of integers (b, c) such that t lies b dominants and c mediants from s. Here, if p and q are pitches belonging to the classes s and t respectively, then there is some integral power of 2, say 2a, such that the interval from p to q in the system of 2.1.5 above is 2a3b5°. We have int(C, G) = (1,0), int(G, D) = (1,0), int(D, F#) = (0,1), int(C, F#) = (2,l), int(C,F) = (-l,0), int(C,Ab) = (0,-l), and int(C,Db) = (—1, —1). (Since we are in just intonation, there are many distinct pitch classes that have any given letter name C, G, D, F#, F, A(7, D|?, and so on. I am supposing above that we are considering the simplest possible harmonic relationship in each case. Later discussion will clarify the exact issues involved.) This system modularizes the system of 2.1.5 by reducing out all octave relationships among both pitches and intervals. Its utility is clear in connection with figure 2.1. The most salient aspect of our harmonic intuition there was that the pitch class F# represented the mediant of the dominant of that dominant of the pitch class C. Our having to manipulate precise registers in the figure, particularly registers for a fundamental bass, made the working out of that intuition more complicated and problematical than necessary in this case. Now that we have available the modular harmonic system of the present example, we could get from C4 to F#4 more simply by a new chain of intuitions. Contemplating the succession of pitches C4-F#4 as before, we arrive as before at the intuition that F#4 is a leading tone to a dominant of C, and therefore functions harmonically as a mediant for a dominant of the dominant. We have now intuited int(C, F#) = (2,1) in modular harmonic space. We know that the pitch interval between two pitches whose pitch classes are in a tonic/dominant relation is validly measured by some-powerof-2 times 3/2. We also know that the pitch interval between two pitches whose pitch classes are in a root/mediant relation is validly measured by somepower-of-2 times 5/4. Hence we infer from our intuition of the pitch-clas interval int(C, F#) = (2,1) the validity of measuring the pitch interval int(C4, F#4) as = some-power-of-2 times (3/2)2 times (5/4). We know that a rising interval between two pitches lying closer than an octave is validly
Generalized Interval Systems (1)
2.1.6
measured by a number between 1 and 2. So we infer that int(C4, F|4) is validly measured by the number 2a times (3/2)2 times (5/4), where the integer a makes the product greater than 1 and less than 2. We can visualize modular harmonic space as a two-dimensional map or game board in the format of figure 2.2.
FIGURE 2.2 On this map, if int(s, t) = (b, c) then the pitch class t lies b places to the right of s and c places above s. (—b places to the right is b places to the left.) The subscripts help us keep track of the mediant dimension: If s has subscript m and t has subscript n then int(s, t) will be of form (something, n - m). The subscripts and the visual format more generally clarify the functional distinctions in this space between pitch classes with the same letter-name but different subscripts; they are at different places on the map. Since we are assuming just intonation, the frequencies involved will differ by factors involving the syntonic comma and the pitch classes C_,, C0, C,, ... will be distinct acoustically. But even in equal temperament, the visual format of figure 2.2 portrays a conceptually infinite harmonic space, whose distinct places correspond to subscripted pitch-classes. (Subscripted pitch-classes can be expressed formally as ordered pairs; for example A\>3 can be expressed as the pair (A|>, 3).) We can conceptualize the intervals of modular harmonic space as characteristic "moves" on the game board of figure 2.2. For example, in going from CQ to Ffj, we move 2 squares to the right and 1 square up. The number-pair (2, 1), which is int(C0, F|j), can thereby be conceptualized as a label for this particular form of the "knight's move" on the game board, i.e. the knight's move east by northeast. The same move (interval) takes us from Al to D#2, or from DL, to G0.
27
2.2.7
Generalized Interval Systems (1)
We could reduce the system of 2.1.6 farther if we considered pitch classes to be equivalent when they shared the same letter name, differing only by subscript. Then C_ l 5 C0, Cj, C 2 ,... C n ,... would all mean the same thing; so would £_!, E0, E l 5 E 2 , . . . , E n . In this case, moving one square north on the game board of figure 2.2 would be functionally equivalent to moving four squares east. The north/south dimension of the board would functionally disappear, and we could reduce our map to a one-dimensional east/west succession of dominant-related pitch classes... E|?0, 6(70, F0, C0, G0, D0, A 0 , E0, ... Because of the equivalence relation that led to this series, we may as well consider the reduced pitch classes to represent pitches in quarter-comma mean-tone temperament: Four new "fifths" (that were steps east on figure 2.2) are pitch-class equivalent to a "major third" (that was a step north on figure 2.2). There is no reason to keep the zero subscripts in the series of mean-tone pitch classes, so we can just write... E[?, 8(7, F, C, G, D, A, E,... The intervals of this reduced system are integers measuring steps "east" on that chain; since we have lost the north/south dimension of our earlier figure, we may as well say "to the right" rather than "east." We could reduce the mean-tone system even farther by declaring the enharmonic equivalence of Gl? with F#, of Dfr with C#, and so on. The infinite series of mean-tone pitch classes thereby gets wrapped around the face of a clock, and we find ourselves back at the system of 2.1.3, only now measuring intervals-modulo-the-octave by (equally tempered) fifths rather than by semitones.1 We have explored six examples, and suggested some further examples, of musical spaces in connection with which we traditionally use the word "interval" to denote a directed measurement, distance, or motion. All six of these musical spaces, melodic or harmonic, had pitches or pitch classes for their elements. Now we transfer our attention to some musical spaces whose elements are measured rhythmic entities of various sorts. We presuppose a context that makes us sensitive to time in segments that can be measured by some temporal unit, whether this unit is some local pulse within a piece or some conceptual span, like the minute that underlies metronome markings. 2.2.1 EXAMPLE: The musical space is a succession of time points pulsing at regular temporal distances one time unit apart. Given time points s and t,
22
1. Maps like figure 2.2 have been especially common in German theories of tonality since the eighteenth century, generally in connection with key relationships rather than root relationships (though some theories do not dwell on such a distinction). The closest precedent I can find for the actual configuration of figure 2.2 itself appears in Hugo Riemann, Grosse Kompositionslehre, vol. 1, Der homophone Satz (Melodielehre und Harmonielehre) (Berlin and Stuttgart: W. Spemann, 1902). Riemann's map is on page 479. He illustrates intervals as moves on the board, on page 480.
Generalized Interval Systems (1)
2.2.3
int(s, t) is the number of temporal units by which t is later than s. (—x units later is x units earlier.) 2.2.2EXAMPLE: The musical space is the preceding one, wrapped around the face of an N-hour clock. We can imagine this as modeling the imposition of an N-unit meter on the earlier space, so that barlines appear regularly every N pulses. The present space has N members, which we shall call "beat classes," labeling them by numbers from O through N — 1. Beat-class 0 comprises all the pulses of 2.2.1 that occur at some bar-line; beat-class 1 comprises all the pulses of 2.2.1 that^ occur one unit after some barline;...; beat-class (N — 1) comprises all the pulses of 2.2.1 that occur one unit before some barline. If s and t are beat classes, int(s, t) is the number of hours clockwise that t lies from s on the N-hour clock. Thus, in twelve-eighths meter (N = 12) the interval from beat-class 10 to beat-class 5 is 7. We discussed the notion of beat classes earlier (1.9.6.2), as exemplifying the concept of equivalence classes. We observed there that a dancing master often calls out beat classes over and over as the pulses go by, using numbers 1 through N rather than 0 through N — 1, e.g. "ONE-two-three, ONE-twothree,..." Conductors and conducting students will also be familiar with the notion kinetically. For them, beat classes are associated with definite spatial positions of the hand, positions which are numbered on pedagogical diagrams. Intervals of 1 between beat classes correspond to minimal unbroken hand gestures for the conductor, gestures that proceed from each beat class to the next along smooth arrows on the diagrams, tracing a characteristic gestural path through this modular space over and over again. This is the path along which we ride "from s to t," making int(s, t) gestural articulations along the way. Milton Babbitt has worked with a system of 12 beat classes that behaves formally exactly like the traditional 12-tone system for pitch classes.2 2.2.3 EXAMPLE: The musical space is a family of durations, each duration measuring a temporal span in time units. And int(s, t) is the quotient of the t and s measurements, t/s. If s spans 4 time units and t spans 3 time units, then int(s, t) = 3/4. t is "3/4 the length of" s. We may, if we wish, identify each duration with the beat for a certain tempo. The numerical quotients of our durations then measure the inverse quotients of the corresponding tempi in tempo-space.3 2. He describes the system in "Twelve-Tone Rhythmic Structure and the Electronic Medium," Perspectives of New Music vol. 1, no. 1 (Fall 1962), 49-79. 3. Influential compositions whose rhythmic textures involve such proportions include Elliott Carter's String Quartet no. 1 (1950-51), Conlon Nancarrow's Studies for Player Piano (1951-), and Gyorgy Ligeti's Poeme symphonique for 100 metronomes (1962).
23
2.2.4
Generalized Interval Systems (I)
2.2A EXAMPLE: We reduce the system of 2.2.3 by a durational modulus M greater than 1. Two durations are conceived as equivalent if one is some integral power of M times the other. This leads us to a modular musical space whose elements are duration-classes (i.e. equivalence classes of durations under the defined equivalence relation). The intervals of 2.2.3 are reduced in the same manner: Two numerical quotients or proportions are conceived as equivalent if one is some power of M times the other. The ratio-classes can be used as formal intervals in the reduced system. Mathematically, the reduction from 2.2.3 to 2.2.4 is exactly the same as the reduction from a system of pitches and pitch-ratios, to a system of pitch classes and ratio-classes modulo powers of M = 2, that is pitch classes and intervals-modulo-the-octave. To illustrate, let us take M = 2 for a rhythmic modulus: Two durations, or two numerical proportions, are conceived as equivalent if one is twice the other, or four times the other, or eight times the other, or half the other, or one-quarter of the other, and so on. One equivalence class of durations is then the family r = (...,5/32,5/16,5/8,5/4,5/2,5,10,20,...). Another equivalence class is the family s = (..., 1/96,1/48,1/24,1/12,1/6,1/3,2/3,4/3, 8/3,...). Yet another equivalence class is the family t = (..., 7/80,7/40,7/20, 7/10,7/5,14/5,28/5,...). With reference to these particular classes r, s, and t, int(r, s) is the ratio-class that contains the number 16/15. The members of this ratio-class are exactly the numbers of form (some-power-of-2)-times-(16/15). If p is any member of class r and q is any member of class s, then the ratio q/p is (some-power-of-2)-times-(16/15). In similar wise, int(s, t) is the ratio-class that contains 21/20; the members of this class are exactly the numbers of form (some-power-of-2)-times-(21 /20). If we allow irrational durations (or tempi with respect to the time-unit), we can consider the equivalence class u = (..., n/4, n/2, n, 2n, 4rc,...). Int(s, u) is the ratio-class that contains the number 3?r/8; the members of this class are exactly the numbers of form (some-power-of-2)-times-(37c/8).4 2.2.5 EXAMPLE: The musical space is a family of durations. Int(s, t) is the difference (NB not the quotient) of time units between s and t: Int(s, t) = (t — s) units. So if r, s, and t are respectively 3, 4, and 8 units long, then int(r, s) = (4 — 3)units = 1 unit, int(s, t) = (8 — 4)units = 4 units, and int(t,r) = (3 — 8)units = — 5 units. In the earlier system of quotients (2.2.3), the corresponding intervals would have been 4/3, 2, and 3/8.
24
4. Karlheinz Stockhausen argues the plausibility of system 2.2.4, with M = 2, in "... how time passes ...," trans. C. Cardew, Die Reihe (English version) vol. 3, pp. 10-40. He also argues there the interrelatedness of his rhythmic system with traditional pitch systems. A clear view of how Stockhausen uses these ideas for the tempi of Gruppen (1955-57) is provided by Jonathan Harvey, The Music of Stockhausen (Berkeley and Los Angeles: University of California Press, 1975), 55-76.
Generalized Interval Systems (1)
2.2.6
The additive system now under study measures intervals in units of time; the earlier system of quotients measured intervals as pure numbers (ratios). The difference between the systems here becomes striking if we set the time unit as "one sixteenth note." Then the durations r = 3, s = 4, and t = 8 can be symbolized respectively by a dotted eighth, a quarter note, and a half note. The additive intervals int(r, s), int(s, t), and int(t, r), computed above as 1 unit 4 units, and — 5 units, can be expressed as "plus a sixteenth," "plus a quarter," and "minus a-quarter-tied-to-a-sixteenth." The corresponding multiplicative intervals are simply the numbers 4/3, 2, and 3/8, numbers that express ratios involving the durations. 2.2.6 EXAMPLE: To simplify matters, we restrict our attention to the durations of 2.2.5 that are exactly the positive integral multiples of some basic small duration, which we take as the temporal unit. We wrap these durations around an M-hour clock, accordingly reducing the system to a modular system. The modular space comprises M duration-classes: Two durations belong to the same duration-class if their lengths differ by some integral multiple of M. The interval between duration classes s-units-mod-M and tunits-mod-M is (t — s)-units-mod-M. t — s is the number of hours clockwise from s to t on the M-hour clock. The duration t is int(s, t) units longer than s, give or take any number of M-unit "measures". For example take M = 16; take s = 8 and t = 4 units mod 16. Then int(s,t) = 4 — 8= — 4 = 12 units mod 16. If we represent the unit as a sixteenth note, then the M-unit "measure" lasts a whole note. The duration-class s = 8 is represented by a half note, give or take any number of whole notes tied on. The duration-class t = 4 is represented by a quarter note, give or take the same. The interval int(s, t) = 12 is represented by "plus a dotted half," give or take the same. Our arithmetic mod 16 above reflects this observation: A quarter note, tied to an extra whole note for free, is a dotted half longer than a half note. We have now explored six rhythmic spaces as well as six tonal ones. To the extent we intuit these spaces, we intuit "intervals" in connection with them. Later on we shall explore yet other spaces, including some more rhythmic ones and some timbral ones. At this point, though, it will be helpful to stop and develop some formal generalities. All of the examples in this chapter so far have certain structural features in common. Foremost among these is our intuition in each case of a group, explicitly or implicitly defined, within which the intervals lie. If i and j are intervals (characteristic measurements, distances, motions, or the like) we intuit being able to compose them in some characteristic way (e.g. by addition, addition mod 12, multiplication, multiplication mod powers of 2, concatena-
25
2.3.1
Generalized Interval Systems (1)
tion of moves on a game board, and so on). And we intuit the composition ij of the intervals i and j to be itself an interval of the system (characteristic measurement, distance, motion, and the like). Indeed, we intuit that for any elements r, s, and t of the musical space, the interval-from-r-to-s composes with the interval-from-s-to-t to yield the interval-from-r-to-t. Symbolically: int(r, s)int(s, t) = int(r, t). We intuit the composition of intervals to be associative: i(jk) = (ij)k. We intuit an identity interval e, that composes with any interval j to yield j: ej = je = j. Indeed, we intuit that each object s of the space lies the identity interval from itself: int(s, s) = e. We intuit that each interval has an "inverse interval" in the sense of measurement, distance or motion: i""1 measures, extends, or moves in the reverse sense from i. We intuit that this intuitive inverse is also a group inverse: 'i-1i = ii"1 = e. Indeed, we intuit that if i is the interval from s to t, then i"1 will be the interval from t to s. Symbolically: int(t, s) = int(s, t)"1. We can collate all these intuitions to construct a formal generalized system. As we shall see, all our examples so far with one exception suggest specific instances of the generalized system. 2.3.1 DEFINITION: A Generalized Interval System (GIS) is an ordered triple (S, IVLS, int), where S, the space of the GIS, is a family of elements, IVLS, the group of intervals for the GIS, is a mathematical group, and int is a function mapping S x S into IVLS, all subject to the two conditions (A) and (B) following. (A): For all r, s, and t in S, int(r, s)int(s, t) = int(r, t). (B): For every s in S and every i in IVLS, there is a unique t in S which lies the interval i from s, that is a unique t which satisfies the equation int(s, t) = i. Condition (B) of the definition is a new idea. We shall discuss it shortly. Condition (A) has already been discussed. But what about the other equations involving the function int, equations we also discussed above? Should we not also stipulate these other equations in defining a GIS? It turns out that we do not have to, because they are logically implied by the group structure and Condition (A). We demonstrate that in the form of a theorem. 2.3.2 THEOREM: In any GIS, int(s, s) = e and int(t, s) = int(s, t)"1 for every s and t in S. Proof: int(s, s)int(s, s) = int(s, s), via Condition (A). Multiply both sides of that equation by int(s, s)"1; we obtain int(s, s) = e as asserted.
26
int(s, t)int(t, s) = int(s, s) via Condition (A). We have just proved that int(s, s) = e; hence int(s, t)int(t, s) = e. Multiply both sides of that equation on the left by int(s, t)"1; we obtain int(t, s) = int(s, t)"1 as asserted.
Generalized Interval Systems (1)
2.3.2
Now let us turn our attention to Condition (B) of the definition. Essentially, it guarantees that the space S is large enough to contain all the elements we could conceive of in theory. The idea is: If we can conceive of an element s and if we can conceive of a characteristic measurement, distance, or motion i, then we can conceive of an element t which lies the interval i from s. In certain specific cases, application of this idea may require enlarging practical families of musical elements, to become larger formal spaces that are theoretically conceivable while musically impractical. For instance, we shall need to conceive supersonic and subsonic "pitches" in order to accommodate the idea of being able to go up or down one scale degree from any note, in connection with example 2.1.1. Figure 2.2 affords another good example: Obviously no finite musical context can explore the entire extent of this map, which accommodates the idea of being able to conceive the dominant, mediant, subdominant, and submediant of any pitch class. This is the methodological point: We must conceive the formal space of a GIS as a space of theoretical potentialities, rather than as a compendium of musical practicalities. In a specific compositional or theoretical context, the space S of a GIS might be perfectly accessible in practice. Such is the case, for example, with the "twelve-tone" GIS pertaining to example 2.1.3: Every one of its twelve pitch-classes is easily referenced by any pertinent music. On the other hand, in other compositional or theoretical contexts, the space S of a GIS might be pertinent as an entirety only to the extent it is suggested or implied by the actually stated musical material, plus the characteristic relationships actually employed. In just this way a painting or statue might suggest or imply the entire extension of Euclidean two-or-three-dimensional space, or some other geometrical space. (I am thinking in particular of the parabolic space in some of Van Gogh's late work.) Let us consider figure 2.2 yet again in this connection. In order to conceive the extension of the entire map, we need only three things: one (tonic) place on the map, the characteristic idea of a "just dominant" relation involving pitch classes, and the characteristic idea of an independent "just mediant" relation. In other words, we need only the pitch classes and the intervals we can infer from one tonic triad (!) in order to generate the entire conceptual group of intervals, and thereby to infer the conceptual extension of the entire map, as a terrain within which a particular composition or theory may occupy some particular region. Another feature of Condition (B) also requires discussion. Given s and i, the condition demands not just some t that satisfies int(s, t) = i, but a unique such t. We might consider weakening the condition, replacing the words "a unique," where they appear in 2.3.1(B), with the word "some." Let us call the weakened condition "(weak B)". Could we gain even greater generality by using (weak B) instead of (B)? Not really. Under condition (weak B), the space S would be partitioned into equivalence classes: s and s' would be equivalent if and only if int(s, s') = e. Given s' equivalent to s and t' equivalent to t, it would
27
2.4
Generalized Interval Systems (1)
be true that int(s', t') = int(s, t). We could thus think of the intervals as being from one equivalence class to another. We could replace S by the quotient family S/EQUIV, the family of equivalence classes, and obtain a GIS thereby. (That is, Condition (B) would apply to the function int on equivalence classes.) It is hard to see what we could possibly want to do with S that we could not do as well or better with the reduced space S/EQUIV of equivalence classes.
28
2.4 At this point, let us briefly review all our examples, noting the various GIS structures which they suggest. 2.1.1 suggests a GIS in which S is the indicated gamut, extended indefinitely both up and down. In this GIS, IVLS is the group of integers under addition and int(s, t) is the number of steps up from s to t. — i steps up is i steps down. The reader may verify that Conditions (A) and (B) of Definition 2.3.1 are satisfied. As we observed informally during the earlier discussion of this example, the non-traditional numbering of the scalar intervals is necessary so that the algebra of Condition (A) can obtain. The GIS suggested by example 2.1.2 consists of the indicated space S, a chromatic scale extended indefinitely up and down, the group IVLS = integers under addition, and the function int(s, t) = number of semitones up from s to t, not counting s. Again, — i up is i down. The reader may verify that Conditions (A) and (B) of 2.3.1 are satisfied. The GIS for example 2.1.3 consists of the space S = the twelve pitch classes as indicated, the group IVLS = the integers under addition modulo 12, and the function int(s, t) = number of hours clockwise from s to t on a 12-hour clock. The GIS for example 2.1.4 consists of the space S = the seven mode degrees as indicated, the group IVLS = the integers under addition modulo 7, and the function int(s, t) = number of hours clockwise from s to t on a 7-hour clock. The GIS for example 2.1.5 has for its space S the extended family of all "pitches" conceptually available from a given pitch using just intonation. The group IVLS here is the multiplicative group comprising all rational numbers that can be expressed in the form 2a3b5c, where a, b, and c are integers. The function int here is the quotient int(s, t) = FQ(t)/FQ(s). To conceive the GIS for example 2.1.6, we take as our space S the "game board" of figure 2.2. IVLS here is the group of ordered pairs of integers (b,c) under componentwise addition: (b^c^ + (b 2 ,c 2 ) = (bt + b 2 ,C! + c2). (IVLS is thus the direct product of the-integers-under-addition with itself.) The function int is as discussed: int(s, t) = (b, c), where t lies b squares east and c squares north of s on the game board. The GIS for example 2.2.1 has as its space S the indicated succession of time points, conceptually extending indefinitely both backwards and forwards in time. IVLS here is the integers under addition, and int(s, t) is the number of time units by which t is later than s, — i later meaning i earlier. For example 2.2.2, the GIS consists of S = the N beat-classes, IVLS = the integers
Generalized Interval Systems (1)
2.4
under addition modulo N, and int(s, t) = the number of hours clockwise that t lies from s on an N-hour clock. The GIS for example 2.2.3 depends upon just what proportions among durations we wish to allow. IVLS in any case will be some multiplicative group of positive numbers. If we allow only the basic proportions of 2 and 3, then IVLS will comprise those numbers of form 2a3b, where a and b are integers; S will then comprise exactly such durations as are in those proportions to any given duration. S is conceptually extended to allow indefinitely short and indefinitely long "durations." If we allow basic rhythmic proportions of 5 and 7, as well as 2 and 3, then IVLS will comprise all numbers of form 2a3b5c7d, and S will contain the corresponding extra members. Or we might take, as basic rhythmic proportions, the square root of 2 (2(1/2)) and the square root of 3 (3(1/2)); then IVLS will contain exactly those numbers of form 2(a/2)3(b/2), where a and b are integers, and S will contain the corresponding durations in proportion to any one given duration. And so on. In each case, the function int(s, t) is given by the quotient t/s = (t units)/(s units). When we reduce the space of 2.2.3 to the space of 2.2.4 by the modulus M, we also reduce the group of intervals for 2.2.3 to a quotient group, the new group of intervals for 2.2.4. Specifically, intervals i' and i for 2.2.3 are declared congruent if one is the other multiplied by some integral power of M: i' = iMa. This relation is indeed a congruence in the group-theoretic sense (1.10.1): It is an equivalence relation, and if j' is congruent to j (f =jM b ), then i'j' is congruent to ij (i'j' = (ij)M(a+b)). The congruence generates a quotient group, imposing a group structure on the family of congruence-classes. Those congruence-classes are the "ratio-classes" of example 2.2.4. The function int for 2.2.4 can be derived mathematically from the function int for 2.2.3, along with the declared equivalence and congruence relations on the space and group of 2.2.3. We shall explore this derivation formally in chapter 3, where we shall study the general construction of a "quotient GIS" from a given GIS and a given congruence on its group of intervals. Example 2.2.5, exceptionally, does not lead at once to a GIS structure. If we try to find a pertinent GIS, we will take IVLS to be some additive group of numbers i, j, ..., for as durations s and t vary in the family S of durations, t may be ±i, ±j,... units longer or shorter than s. And int(s, t) = (t — s)units But S, IVLS, and int here cannot satisfy Condition (B) of Definition 2.3.1. For instance, try s = 3 units and i = — 8 units; then there is no duration t in S satisfying int(s, t) = i. If there were such a t, then (t — s)units = (t — 3)units would have to equal i units = — 8 units, t — 3 would equal — 8, and t would be — 5 units in duration. But S does not contain "negative durations," and failing some convention not yet specified, it is not clear what intuition we could possibly be modeling, when we stipulate a duration t that lasts not only less than no time at all, but also measurably less than no time at all. The modeling problem here is different in kind from those involved in other spatial exten-
29
2.4
Generalized In terval Systems (1)
sions we have made conceptually. E.g., while we cannot hear a "pitch" of .001 Hertz fundamental, or of five trillion Hz fundamental, we can conceive such pitches. That is, we are at ease with the notion of periodic vibration at those rates, and we can imagine that other creatures might be sensibly aware of them. In the same sense, we can conceive indefinitely short and indefinitely long "durations," and we can conceive "time points" that lie indefinitely far back in the past or ahead in the future. But we can not conceive, in such a sense, a duration lasting precisely 5 units less than no time at all, which is thereby precisely 2 units longer than a duration lasting precisely 7 units less than no time at all. So example 2.2.5 does not lead to a GIS. Example 2.2.6 can be regarded as one means of salvaging example 2.2.5 in this connection, by providing a convention that attaches meaning to the concept of a negative duration-class. E.g. we can think of duration-class " — 5" as that class containing all durations lasting just 5 units less than some multiple of the modulus duration. " — 5" thus means the same as "M — 5," or the same as " — 5, modulo M." Example 2.2.6 has a GIS structure. The space S comprises the M duration-classes. The group IVLS is the additive group of integers modulo M. int(s, t) is the number of hours t lies clockwise from s when the duration-classes are wrapped around an M-hour clock. The reader can verify that (S, IVLS, int) is indeed a GIS. In particular, Condition (B) of the definition, which failed for example 2.2.5, obtains for example 2.2.6.
30
3
Generalized Interval Systems (2): Formal Features
There is a familiar convention whereby the twelve pitch classes in equal temperament are labeled by their intervals from a referential pitch class C. C, C#, D, ..., Bb, B are thereby labeled 0, 1, 2, ..., 10, 11 (mod 12). This convention can be generalized. That is, in any GIS we can always use the intervals of the group IVLS to label the members of the space S by their respective intervals from an assumed referential object in S. We can make the notion formal by introducing some new terminology. 3.1.1 DEFINITION: Given a GIS (S, IVLS, int) and a fixed referential member "ref" of S, the function LABEL, mapping S into IVLS, is defined by the equation LABEL(s) = int(ref, s). 3.1.2THEOREM: Whatever the element ref, the function LABEL maps S 1-to-l onto IVLS, and it satisfies the formula int(s,t) = LABEL(s)~1LABEL(t). Proof: Given the element ref and any interval i, there is one and only one s in S satisfying int(ref,s) = i, by Condition (B) of Definition 2.3.1 for a GIS. Since int(ref, s) is LABEL(s), we have observed the following: Given any i, there is some s satisfying LABEL (s) = i; furthermore, there is only one such s. Thus the function LABEL is onto; furthermore it is 1-to-l. Now we prove the formula of the theorem. By definition 3.1.1, LABEL(s)"1LABEL(t) = int(ref,s)~1int(ref,t). In that equation we can substitute int(ref, s)"1 = int(s, ref), via 2.3.2. The equation then states: LABEL(s)~1LABEL(t) = int(s, ref)int(ref, t). And the expression on the
31
3.1.2
Generalized Interval Systems (2)
right side of that equation equals int(s, t) as desired, via Condition (A) of Definition 2.3.1. q.e.d. The LABEL function can be very useful, particularly for computations involving members of S. On the other hand, its use in some contexts can be problematic, both conceptually and computationally. Conceptually, there may not always be adequate musical reasons for assigning a special referential status to ref. Why, for example, should I assign this status to the pitch class C a priori? Perhaps, in a certain context, I hear no referential pitch class at all, but rather notes related only to each other, and not to any one given note. Or perhaps I hear E as referential in this piece; then why should I call E "4" in a CLABELing system, rather than "0" in an E-LABELing system? But the violins and string basses have actually decided how E will sound by tuning their Es a certain interval from A; then would it not be methodologically most accurate to use an A-LABELing system? And so on. Some of the conceptual issues will be familiar from similar issues in fixed-do and movable-do systems of solfege. Conceptual difficulties aside, computations themselves can be muddled, when we use a LABELing system, by the algebraic influence of irrelevant intervals, intervals arising from irrelevant relations of ref to the objects s, t , . . . , whose interrelations we actually wish to compute.1 Now we shall explore some ways in which we can formally construct new GIS structures from old. We have observed one such construction used informally again and again during our survey of examples 2.1 and 2.2 earlier; that is the construction of a "quotient GIS" from a given GIS and a stipulated congruence relation on IVLS. Whenever we spoke informally about "modularizing" one system to obtain another, we invoked such a notion. Soon we shall make the notion formal. By way of preparation before doing so, we shall examine a bit more carefully just how it applies in one specific and familiar case. We consider for this purpose how the "chromatic scale" GIS of 2.1.2 gives rise to the "twelve-tone" GIS of 2.1.3. Let us call the two systems respectively GISj = (S^IVLS^intO and GIS2 = (S 2 ,IVLS 2 ,int 2 ). S t is a chromatic scale extended conceptually up and down indefinitely. IVLSi is the integers under addition. int: (s, t) is the number of semitones up from s to t. When "modularizing" GISX to obtain GIS2, we use a certain congruence on the group IVLSi. Intervals i and i' are congruent if i' = i plus or minus some integral multiple of 12. This relation is indeed a congruence in the grouptheoretic sense of 1.10.1. That is, it is an equivalence relation; furthermore, i' + j' is congruent to i + j whenever i' is congruent to i and j' is congruent to
32
1. I discuss these matters further in "A Label-Free Development for 12-Pitch-Class Systems," Journal of Music Theory vol. 21, no. 1 (Spring 1977), 29-48.
Generalized Interval Systems (2)
3.1.2
j. As we saw in chapter 1, the congruence gives rise to a quotient group IVLSJCONG. The elements of this group are the congruence classes, and the binary combination of these elements in the quotient group is well defined (!) by the formula (class-containing-i) 4- (class-containing-j) = (classcontaining-(i + j)). In this case the quotient group is the integers modulo 12. And that is IVLS2, the group of intervals for GIS2. In modularizing GlSi to GIS2 we also invoked a certain equivalence relation on S^ Pitches s and s' were declared equivalent if they differed by some integral number of octaves. The condition for equivalence of s and s' can be expressed by using the congruence relation on IVLSj (and that is important): s and s' are equivalent as defined if and only if int^s, s') is divisible by 12, which is the case if and only if intl (s, s') is congruent to the identity interval oflVLSj. The equivalence relation reduces the family S! of pitches into the family S2 of pitch classes. S2 = S1/EQUIV: The 12 pitch classes are precisely the 12 equivalence classes of pitches, under the constructed equivalence relation. Finally, in modularizing GlSt to GIS2, we implicitly invoked a significant interrelation between the congruence on IVLS^ and the equivalence relation on Sv: If pitches s and s' are equivalent (different by some number of octaves), and if pitches t and t' are also equivalent, then the intervals int^s.t) and int^s'jt') are congruent (different as integers by some multiple of 12). We can put this another way, significant for our purposes: The congruence class to which intj(s, t) belongs depends only on the equivalence class to which s belongs and the equivalence class to which t belongs, not on any specific s' and t' chosen to represent those equivalence classes. This feature of the situation enables us to see how the function int2 works for our present example: Given pitch classes (equivalence classes) p and q, int2(p, q) in IVLS2 is the congruence class (interval mod 12) to which int1(s, t) belongs, whenever s and t are any pitches belonging to the pitch classes (equivalence classes) p and q respectively. For example, let p and q be the pitch classes C and F. If s and t are middle C and Queen-of-the-Night F, then int^s.t) = 29 (semitones). If s' and t' are high C and contra F, then intjCs'.t') = -55 (semitones). The integers 29 = 24 + 5 and -55 = — 60 + 5 belong to the same congruence class mod 12, "congruence-class 5." If s" and t" are any other pitches belonging to p and q (i.e. named C and F), then intj (s", t") also belongs to congruence-class 5. That is what gives rigorous meaning to our saying "int2(C, F) = 5." Otherwise, our clock-face model for GIS2 would remain only arbitrarily or vaguely related to GISj. Indeed, we could use the relationships under present discussion to define int2'. int 2 (p,q) is that unique congruence class which contains any and all values of inti(s, t), s being any member of p and t being any member of q. Everything noted about OK^ and GIS2 in the example just studied can be generalized so as to define a "quotient GIS," given any GIS and any con-
33
3.2.1
Generalized Interval Systems (2)
gruence relation on its group of intervals. The work of section 3.2 following will be devoted to this generalization. 3.2.1 THEOREM AND DEFINITION: Let (S, IVLS, int) be a CIS; let CONG be a congruence on the group IVLS. Then an equivalence relation EQUIV is induced on S by declaring s and s' to be equivalent whenever int(s, s') is congruent to the identity e in IVLS. EQUIV will be called the induced equivalence on S. Proof: int(s, s) = e, so EQUIV as defined is reflexive. If int(s, s') is congruent to e, then int(s', s) = int(s, s')"1 is congruent to e; thus EQUIV as defined is symmetric.2 Finally, if int(s, s') and int(s', s") are both congruent to e, then int(s, s") = int(s, s')int(s', s") is congruent to e-times-e = e. Thus EQUIV is transitive. 3.2.2 LEMMA: Let (S, IVLS, int) be a GIS; let CONG be a congruence on IVLS. Then the following is true. Suppose s and s' are equivalent in S under the equivalence induced by CONG; suppose t and t' are also equivalent under that equivalence relation; then int(s, t) and int(s', t') are congruent members of IVLS. Proof: int(s,t) = int(s,s')int(s',t')int(t',t). Now both int(s,s') and int(t', t), by supposition, are congruent to e. Hence int(s, t) is congruent to e • int(s', t') • e. That is, int(s, t) is congruent to int(s', t'). q.e.d. 3.2.3 THEOREM: Let (S^IVLS^inti) be a GIS. Let CONG be any congruence on IVLSj; let EQUIV be the induced equivalence relation on S^ Let S2 be the quotient space Sj/EQUIV, the family of equivalence classes within §! under the induced equivalence. Let IVLS2 be the quotient group IVLS ! /CONG, whose members are the congruence classes within IVLS^ Then a function int2 from S2 x S2 into IVLS2 is well defined by the following method: Given equivalence classes p and q (members of S2), the value int 2 (p, q) is that congruence class (member of IVLS2) to which int1(s, t) belongs, whenever s and t are members of p and q respectively. Furthermore, (S 2 ,IVLS 2 ,int 2 ) is itself a GIS. Proof (optional): Lemma 3.2.2 assures us that int2 is well defined by the indicated procedure: Given p and q, if s and s' are any members of p, and if t and t' are any members of q, then int^s', t') belongs to the same congruence class as int^s, t). That congruence class thus depends only on the equivalence classes p and q, and not on the particular s-and-t, or s'-and-t', which we choose
34
2. The reader may prove as an exercise the necessary lemma: If x is congruent to e in a group, then x"1 is also congruent to e. After that, prove this: If x is congruent to y, then x"1 is congruent to y-1. (Hint: x"1 y is congruent to x"1 x; apply the preceding lemma. Alternatively, but less elegantly, one can bludgeon out all the desired results as corollaries of 1.11, 1.12.1, and related results already established.)
Generalized Interval Systems (2)
3.2.4
to represent p and q. And it is that congruence class which is thus well defined, asint 2 (p,q). We now prove that (S2, IVLS 2 ,int 2 ) is a GIS. To do so, we must show that Conditions (A) and (B) of Definition 2.3.1 are satisfied. We show first that (A) is satisfied. Given equivalence classes o, p, and q in S 2 , we want to show that int2(o, p)int2(p, q) = int2(o, q). Let r, s, and t be elements of Sj that are members of classes o, p, and q respectively. The congruence class containing inti(r, s) combines in the quotient group with the congruence class containing int^s, t), to yield the congruence class containing int^r, s)int1(s, t) (1.11). And, since (S^IVLS^intJ is a GIS, int^r, 8)111^(8,1)1 = int^M). Hence the congruence class containing int^r, s) combines in the quotient group with the congruence class containing int^s, t), to yield the congruence class containing intj(r, t). Or, by the definition of int 2 in the theorem, int 2 (o,p)int 2 (p,q) = int 2 (o,q), as desired. So the system (S 2 ,IVLS 2 ,int 2 ) satisfies Condition (A) of 2.3.1. It remains to show that the system also satisfies Condition (B) of that definition. Given any equivalence class p (member of S 2 ) and any congruence class J (member of IVLS2), we must show that there is a unique equivalence class q that satisfies the equation int2(p, q) = J. Let s be a member of the given p; let j be a member of the given J. Since (S:, IVLSi, intl) is a GIS, we can find a (unique) t in Sj which satisfies the equation int t (s, t) = j. Let q be the equivalence class containing this t. q is that class (member of S 2 ) for which we are searching. First of all, q satisfies the equation int2(p, q) = J. That is so because int^s, t) = j, s belongs to p, t belongs to q, and j belongs to J; int2 was defined precisely so as to make this happen. Furthermore, q is a unique solution for the equation int2(p, q) = J. To see this, let us suppose that int 2 (p,q') = J; we shall show that q' must equal q. Let t' be a member of q'; then by the nature of int 2 , in^ (s, t') lies in the congruence-class J. So intj (s, t') is congruent to int^s, t). Thence, applying the second lemma of footnote 2, we infer that int^s, t')"1 is congruent to int^s, t)"1. Or: int^t', s) is congruent to int t (t,s). Then int^t', s^nt^s,t) is congruent to int^t,s)int 1 (s,t). Or: inti(t', t) is congruent to int^t, t) = e. But then t' is equivalent to t under the induced equivalence relation: The interval between them is congruent to e. Hence t' and t lie in the same equivalence class; that is, q' = q as asserted, q.e.d. 3.2.4 DEFINITION: Given the situation as in 3.2.3, the GIS(S 2 ,IVLS 2 ,int 2 ) will be called the quotient GIS of (S^IVLS^intJ modulo CONG. We write GIS2 = GIS1/CONG. Thus, to review yet once more the specific example discussed just preceding 3.2.1, let (S l5 IVLS15 int x ) be the GIS such that S t is an infinite chromatic scale, IVLSj is the additive group of integers, and int x (s, t) is the number of
35
3.2.4
36
Generalized Interval Systems (2)
semitones up from s to t. Let CONG be the relation on IVLSj that makes i congruent to i' when the intervals differ by any integral multiple of 12 semitones. Then the quotient GIS(S2, IVLS2, intj), constructed by the method of section 3.2, has these components: S2 is the family of twelve pitch-classes, IVLS2 is the integers modulo 12, and int^p, q) is the reduction modulo 12 of the integer intj(s, t), where s and t are any pitches belonging to the pitch classes p and q respectively. Here is another specific example. S, is the family of all pitches that can be conceptually generated from a given pitch using just intonation. IVLSj is the group under multiplication of all rational numbers that can be written in the form 2a3b5c, where a, b, and c are integers. int,(s, t) is the fundamental frequency of t divided by the fundamental frequency of s. (Sp FVLSj, intj) is a GIS. It was studied earlier in example 2.1.5. When we informally "modularized" that GIS to obtain the "modular harmonic space" of example 2.1.6, we were actually constructing a quotient GIS, using a certain congruence relation on IVLSj. Specifically, we declared intervals i and i' within IVLSj to be congruent if i' was some-power-of-2 times i. As we noted earlier (in example 1.10.4.2), this relation is indeed a congruence on IVLSj: It is an equivalence relation; further, if I' is some-power-of-2 times I and j' is some-power-of-2 times j, then i'j' is some-power-of-2 times ij. Using this congruence, we can note how the formal constructions of section 3.2 go through for the GIS at hand, producing the GIS for example 2.1.6 as a quotient GIS. By Definition 3.2.1, the induced equivalence on Sj makes s equivalent to s' if and only if intj(s,s') is some-power-of-2. Thus s and s' enjoy the induced equivalence relation here if and only if the pitches lie some number of octaves apart. The equivalence classes (members of S2) are thus precisely the pitch classes determined by the pitches of S,. And, given pitch classes p and q, int^p^) in the quotient group is well defined as the congruence class to which intj(s, t) belongs, whenever s and t are members of p and q. If the intervals, i, i', i", . . . all belong to this congruence class, then we can write i = 2a3b5c, i' = 2a'3b5c, i" = 2a"3b5c, ... and so on. So we may identify the congruence class with the number-pair (b, c). When s and t are members of p and q, then t, give or take some number of octaves, lies b twelfths and c majorseventeenths from s. Taking some octaves, we can say that t, give or take some number of octaves, lies b fifths and c major-thirds from s. Returning our attention to the pitch classes p and q, of which s and t are members, we can say that q lies b dominants and c mediants from p. That is, on the game board of figure 2.2, q lies b steps east and c steps north from p. The quotient GIS here is thus the GIS associated with that game board in example 2.1.6. As a further specific example, the reader can work out how the formal constructions of section 3.2 apply to the "diatonic scale" GIS associated with example 2.1.1, together with the congruence which collects octave-related intervals (those here which differ by multiples of 7 scale steps), to give rise to a
Generalized Interval Systems (2)
3.3.1
quotient GIS which is in fact the GIS of example 2.1.4, a GIS of seven scaledegrees. In similar fashion the GIS associated with the time-point space of example 2.2.1, together with the congruence which collects time intervals differing by multiples of "N beats," gives rise to a quotient GIS which is in fact the GIS of example 2.2.2, the GIS associated with the space of N beat-classes. Likewise, the GIS of example 2.2.3, together with a suitable congruence, gives rise to the GIS of example 2.2.4 as a quotient GIS; the discussion of example 2.2.4 may be reviewed in this connection. The reader may also review further the discussion of example 2.1.6, to see how the GIS of just pitch-classes, corresponding to the game board of figure 2.2, can give rise to a quotient GIS whose space is an infinite one-dimensional chain of dominant-related pitch classes in quarter-comma mean-tone temperament. The congruence at issue declares two "moves" (b, c) and (b', c') on the game board of figure 2.2 to be congruent if there is some integer N such that b' = b + 4N while c' = c — N, that is, if b' steps east is the same as b steps east plus 4N steps east, while c' steps north is the same as c steps north and then N steps south. ( — N east, north, etc. means N west, south, etc.) If we take b = 0, c = 0, and N = 1 in the above arithmetic, then b' = 4 and c' = — 1. Thus going four squares east and one square south on the game board is a move congruent to "staying still." The reader may verify that the defined relation is a congruence, and that the induced equivalence relation on the game board renders equivalent just those pitch classes that share the same letter-name (differing, if at all, only by subscript). Each of the specific examples above instances, in one setting or another, the general and abstract relation of a given GIS, modulo a given congruence, to a quotient GIS. We can see thereby how ubiquitous the quotient construction really is, as a method of generating new GIS structures from old. Another useful method is the construction of a "direct-product GIS." Before proceeding to an abstract discussion of that idea, let us study some examples of it. 3.3.1 EXAMPLE: Let GISj be the GIS of example 2.1.3: Sj is the twelve equally-tempered pitch classes; IVLSi is the integers modulo 12; int^p, q) is the number of semitones up, mod 12, from any pitch within class p to any pitch within class q. Let GIS2 be the GIS of example 2.2.1: S2 is an indefinite series of equally spaced time-points; IVLS2 is the integers under addition; int2(s, t) is the number of beats from time-point s to time-point t. We construct a new GIS, GIS3, as follows. S3 is the Cartesian product of S x and S2, that is, S3 = Si x S2. S3 is thus the family of ordered pairs (p, s), where p is a pitch class in Sj and s is a time point in S2. IVLS3 is the direct-product group of the groups IVLS! and IVLS2; that is, IVLS3 = IVLSj (g) IVLS2. A sample member of IVLS3 thus has the form (ij, i 2 ), where ij is an integer mod 12 (member of IVLSj) and i 2 is an integer (member of IVLS2). The members of IVLS3 combine under the law of 1.13 for direct-
37
3.3.1
Generalized Interval Systems (2)
product groups: (ilt\2) + (JiJ 2 ) = Oi + Ji,i 2 + J2>; here the sum h + Ji is computed mod 12 in IVLS l9 while the sum i 2 + J 2 is the ordinary integer sum in IVLS2. The function int3 works as follows. Given two members (p, s) and (q, t) of S3, each a pitch-class-cum-time-point pair, the interval int3((p, s),(q, t)) is taken as the pair (int 1 (p,q),int 2 (s,t)) within the group IVLS 1 (g)IVLS 2 = IVLS3. (S3, IVLS3, int 3 ) as constructed is in fact a GIS. The reader may take this on faith or verify it as an exercise. Later on we shall call this GIS the direct product GIS of GlSi and GIS2, writing GIS3 = GISj ® GIS2. Right now, let us explore what GIS3 models. One sample member of S3 is the pair (C#, 35), which models a reference to pitch class C# at time 35. Another member of S3 is the pair (F,46), which models a reference to pitch class F at time 46. The interval between the two cited objects is (int^Cft, F),int 2 (35,46)) = (4,11). The compound interval (4,11) models the spanning of pitch-class interval 4 between events happening at time-points 11 beats apart.
FIGURE 3.1
38
Figure 3.1 will be used to suggest the relevance of GIS3 for musical analysis and theory. It transcribes the opening of the third movement from Webern's Piano Variations op. 27. The brackets on the figure display some GIS3-intervals of interest, using the written quarter note as the temporal unit. Temporal intervals between time-points are calculated between attacks of the notes. Thus the bracket from E|? to D on figure 3.1 is labeled by the GIS3interval (11,5): A pitch-class interval of 11 is spanned between the attack of the Eb and the attack of the D, 5 beats later. Similarly, the bracket on the figure between D and C# is labeled by the GIS3-interval (11, 5): A pitch-class interval of 11 is again spanned between two time-points 5 beats apart, here between the attack of the D and the attack of the C#. The GIS3-interval (11,1) labels the brackets extending from B to B[? attacks, from C# to C attacks, and from A to G# attacks; in each case, the pitch-class interval 11 is spanned between events happening 1 beat apart. The recurrences of GIS3-intervals on figure 3.1 are of analytic interest,
Generalized Interval Systems (2)
3.3.1
for not many GIS3-intervals occur more than once in this passage. The recurrent GIS3-interval (11, 1) is associated with a quiet slurred figure in the left hand which we shall call "the accompaniment figure"; this figure occurs in the music at B-B|> and again A-G#. However the musical presentation of C#-C, also associated with the GIS3 interval (11, 1), does not project the accompaniment figure; rather, it is loud and staccato. The recurrence of the GIS3 interval (11, 1) on figure 3.1 imbues the pitch-class interval 11 with a special function: As the passage unfolds in time, pitch-class interval 11 becomes bound up with defining the beat. That is, pitch-class interval 11 recurs significantly in connection with beat-interval 1, forming the GIS3-interval (11, 1). And no other pitch-class interval recurs in conjunction with beat-interval 1. This special beat-defining function for pitch-class interval 11 gives special meaning in turn to the recurrence of GIS3-interval (11, 5) on figure 3.1, a GIS3-interval which also involves pitch-class interval 11. Via the recurrent GIS3-interval (11, 5), the temporal interval of 5-beats-later becomes associated with the pitch-class interval 11, a pitch-class interval of special mensural status. "5 beats later" thereby acquires a special mensural status itself, linking it with "1 beat later" via the pitch-class interval 11 that is shared by the recurrent GIS3-intervals (11, 5) and (11, 1). This special mensural status for "5 beats later" is not the only reason many analysts hear the music "in * meter," but it does endow the possibility of such a hearing with a special meaning and thematic richness.3 I myself believe that pertinent statements involving GIS3-intervals provide a more exact and less problematic account of the mensural structures at issue here, then does the notion of "^ meter." Figure 3.1 also shows the recurrence of the GIS3-interval (3, 2), spanning B-attack to D-attack and also E-attack to G-attack. The recurrent (3, 2) seems to have a cadential function in the music, to my ear, "2 beats later," the "2" of the GIS3-interval (3, 2), engages the notated meter of the music, which "5 beats later" does not. In these connections, the pitch-class interval 3, as it recurs within the GIS3-interval (3, 2), has its own special function, to my ear a cadential function. Hearing a cadence on the D and another on the G is consistent with the maximal amount of time we wait, after the attack of the D and again after the attack of the G, before hearing the next attack in each case. It is curious that the next attack after this maximal wait comes precisely "5 beats later" in each case. Indeed if we start measuring spans of 5 beats starting 3. A \ "cross-meter" is heard as one of several contending temporal patterns by Edward T Cone, "Analysis Today," Problems of Modem Music, ed. Paul Henry Lang (New York: W. W. Norton, 1962), p. 44. Elsewhere, we can read that the first three notes we hear form a rhythmic group which "is clearly *; the motion of the two quarter notes into the next downbeat defines the meter precisely." This is the hearing of James Rives Jones, "Some Aspects of Rhythm and Meter in Webem's Opus 27," Perspectives of New Music vol. 7, no. 1 (Fall-Winter 1968), p. 103. Later, still on page 103, he refers to "the \ meter" as "already ... established" by the cited criterion.
39
3.3.1
Generalized Interval System (2)
at the attack of the opening El., then the D and the G on figure 3.1, with the rests that follow them, each fill one such span. I do not know what to make of this. The idea of quintuple "perfections" seems a better metaphor for my hearing this aspect of the music than does the idea of quintuple "meter." Figure 3.1 also shows the recurrent GIS3-interval (2, 7), interlocking the mensural function of "7 beats later" with the pitch-class interval 2. The first (2, 7) recurrence links the two notes of the B-B[> accompaniment figure to the corresponding two notes of the C|-C figure, 7 beats later. The second recurrence (third occurrence) of (2, 7) links the attack of the cadential G to the beginning of the accompaniment figure A-G| 7 beats later. In sum, the recurrent GIS3-interval (2, 7) links aspects of the recurrent accompaniment figure with other events of the music.
FIGURE 3.2
40
Figure 3.2 summarizes the discussion of figure 3.1 so far, in the form of a table. It shows how the recurrence of GIS3-intervals gives special meanings to the pitch-class intervals 11, 3, and 2, as those interrelate with the temporal
Generalized Interval Systems (2)
3.3.1
intervals 1,5,2, and 7, all in connection with various compositional features of the music. 83-elements
GIS3-interval vectors of S3 sets
FIGURE3.3 Figure 3.3 applies to the opening of the passage a theoretical construction suggested by the temporal aspect of GIS3. The left-hand column of the figure lists the first six members of S3 in their order of appearance during the passage. First comes pitch-class Eb at time-point 0, instancing element (Eb,0) of S3. Next comes pitch-class B at time-point 3, instancing element (B, 3) of S3. At this time (i.e. just after time-point 3), we become aware of a 2-element S3-set, that is, the set ((Eb, 0), (B, 3)). The elements of this set form one GIS3-interval with a positive time-component, that is, the interval (8,3) from (Eb,0) to (B, 3). The GIS3-interval (8,3) is listed in the second row of the second column in figure 3.3; that interval is the sole constituent within the interval vector of the 2-element S3-set. Now the pitch class 8(7 occurs at time-point 4, providing the new S3 element (Bb,4) for the third row of column 1 on figure 3.3. At this time (i.e. just after time-point 4), we become aware of a 3-element S3-set, ((Eb,0),(B,3),(Bb,4)). Besides the GIS3-interval of (8,3) already listed in row 2, the elements of the 3-member set produce new GIS3-intervals of (7,4) (= int 3 ((Eb,0),(Bb,4))) and (11, !)(= int 3 ((B,3),(Bb,4))). These new constituents for the interval vector of the expanded 3-element S3-set are listed in the third row of column 2 on figure 3.3; the old interval vector expands to include the occurrences of the two new intervals. When pitch class D enters at time-point 5, the 3-element S3-set expands to a 4-element S3-set ((Eb,0),(B,3),(Bb,4),(D,5)), and the interval vector of the 3-element set expands to adjoin new occurrences of the GIS3-intervals (11,5)(= int 3 ((Eb,0),(D,5))), (3,2)(= int 3 ((B,3),(D,5))), and (4,1) (= int 3 ((Bb,4),(D, 5))). The new intervals are listed in the fourth row of column 2, on figure 3.3. At this time (i.e. just after time-point 5), we become
41
3.3.1
Generalized Interval Systems (2)
aware for the first time that some pitch-class intervals are predominating over others, and that some temporal intervals are predominating over others, as we note the various intervals going by. In earlier work I have suggested that our becoming aware of such predominances is associated with our marking such a time-point as an "ictus."4 The present analysis supports that theoretical idea, since time-point 5 is both a notated barline, indeed the first notated barline, and also audible to some extent as marking the attack of an intuitively "strong" quarter. These considerations lie behind my bracketing the first four entries of column 1 on figure 3.3, as belonging together in a special way. According to the theory just sketched, it is only when the 4-element S3-set has been completely exposed, i.e. it is at and only at a moment just after time-point 5, as we listen along, that we first become sensitive to any regular mensural structuring in the passage. Just after time-point 5 we become aware that temporal interval 1 is predominating over other temporal intervals; we can then (and only then) hear temporal interval 1 as a beat with which to measure other temporal intervals. In that sense the GIS3-structure of figures 3.1-3.3 really "begins" for a listener at (and only at) time-point 5, the first written barline and the first perceived ictus; any GIS3-structure preceding time-point 5, according to this theory, is reconstructed^ a listener at (or following) time-point 5. Not only is the beat established at time-point 5, the pitch-class interval 11 is also established at the same time, as a predominating pitch-class interval. Pitch-class interval 11 is thus bound psychologically to the establishment of mensural structure in the piece, as part of one and the same Gestaltist experience that a listener will be having just after time-point 5.
FIGURE 3.4
Figure 3.4 symbolically collates the ideas discussed just above. The figure also suggests how the temporal interval of "5 beats later" has already acquired a special significance at the moment the listener hears time-point 5. "5 beats later," namely, spans the temporal distance from the opening attack to the first ictus. Figure 3.4 shows how that temporal distance is already clearly associated with the structural function of the recurrent pitch-class interval 11,
42
4. David Lewin, "Some Investigations into Foreground Rhythmic and Metric Patterning," Music Theory, Special Topics, ed. Richmond Browne (New York: Academic Press, 1981), 101-37.
Generalized Interval Systems (2)
3.3.1
the pitch-class interval between the opening Eb and the D of the first ictus, 5 beats later. These considerations enable us to analyze with greater precision how the idea of "being in 4" might arise, and how it would become associated with the compositionally thematic E(?-D gesture.5 Let us now inspect the fifth row of figure 3.3, investigating how our impressions develop when C# is attacked at time-point 10, introducing new manifestations of the GIS3-intervals (10,10), (2,7), (3,6), and (11,5). We now hear a second pitch-class interval of 3, but simultaneously we also hear a third pitch-class interval of 11. The latter interval, by recurring yet again, continues to predominate over other pitch-class intervals. Indeed, its predomination itself recurs. Furthermore, we now (i.e. just after time-point 10) hear for the first time the recurrence of a GIS3-interval (not just of a temporal interval or pitch-class interval). The recurring GIS3-interval is (11,5), recently discussed in connection with the possibility of asserting a "thematic | meter" listening at time-point 5. The sensations prompting such a possible assertion are thereby intensified at time-point 10. Time-point 10 is experienced as an "ictus" in the formal sense of the theory mentioned earlier. Dynamic and registral accents at time-point 10, the loud low C# attack, support the possible hearing of a "strong beat" there, should one want to assert "| meter" beyond purely mensural considerations. We can then expand figure 3.4 to figure 3.5, which portrays a provisional impression one might have while listening just after time-point 10.
FIGURE 3.5
Now let us turn to the sixth row of figure 3.3, investigating our impressions when C is attacked at time-point 11, introducing new manifestations of the GIS3-intervals (9,11), (1,8), (2,7), (10,6), and (11,1). (11,1) here is a recurring GIS3-interval; it confirms our already developed sensations about the beat-defining and other mensural functions of the pitch-class interval 11. The GIS3-interval (2,7) also recurs at time-point 11. This builds up another 5. My analysis of listener psychology just after time-point 5 partly elaborates, partly qualifies, and partly takes issue with the thought-provoking approach to this passage by Christopher Hasty, in his important methodological and analytic study, "Rhythm in Post-Tonal Music: Preliminary Questions of Duration and Motion," Journal of Music Theory vol. 25, no. 2 (Fall 1981), 183-216.
43
3.3.1
Generalized Interval Systems (2)
mensural matrix that tries to expropriate (11,1) for its own purposes, trying to put an ictus at time-point 11, rather than time-point 10. Figure 3.6 sketches this notion.
FIGURE 3.6 The ictus on C in figure 3.6 corresponds to a written barline; this was not the case with the conflicting ictus on C# in figure 3.5. That C# was 5 beats after the D-ictus of figure 3.4; the C of figure 3.6, which picks up the Hauptstimme D in register, is 6 beats after the D-ictus. The mensural conflict of "5 units after" (D-ictus to C#-ictus) and "6 units after" (D-ictus to C-ictus) is highly thematic in op. 27 as a whole.6 The mensural reading of figure 3.6 tries to associate the C#-C event in the music with the "accompaniment figure," the figure that projected the B-B[? event. In contrast, the mensural reading of figure 3.5 tried to associate the D-C# descent with the thematic E[?-D descent. Figure 3.5, of course, "did not know about" the forte and staccato C natural coming up right after the forte and staccato C#. We have already discussed how the recurrent GIS3-interval (2,7) interacts with the accompaniment figure more generally. This completes the exegesis of figure 3.3. The theoretical notion of an "unfolding interval vector," made abstractly available by the temporal aspect of GIS3, was analytically useful for examining our impressions of figure 3.1 as those developed note-by-note, and for discussing to a significant extent our impressions of the music beyond that. GIS3 was particularly useful because it enabled us to consider pitch-class structure and mensural rhythmic structure in conjunction with each other, rather than as independent features of the passage. That is the essence of GIS3 in its capacity as what we shall soon call the direct product of GISt and GIS2.
44
6. A conflict between mensural distances of 5 and 6 units figures in the relation of the rhythmic ostinato to the written meter at the opening of the first movement. A reprise of this rhythmic conflict occurs at the opening of the coda in the last movement (mm. 56-62). The written meters are functional, in ways too complex to indicate here. Special accents attach to the loud and dense trichord-pairs of the middle movement. The lower chords of the trichord-pairs attack at the barlines of measures 4, 9, 4 bis (6 measures after 9), 9 bis, 15, 20, 15 bis (6 measures after 20), and 20 bis. The resulting pattern projects alternating spans of 5 and 6 written measures. Indeed this may well be the strongest mensural function for the written measure as a temporal span in the movement.
Generalized Interval Systems (2)
3.3.3
3.3.2 EXAMPLE: Let GISj be the GIS involving time-points, that just figured as "GIS2" in the preceding example. For the present example, let GIS2 be a GIS of durations as in 2.2.3 earlier: S2 is a certain family of "durations" x, y,... related by certain stipulated proportions; IVLS2 is the multiplicative group of such proportions; int2(x, y) is the quotient y/x. We construct a new GIS, GIS3, as follows. S3 is the Cartesian product S x x S2, that is, the family of pairs (s,x), where s is a time-point and x is a duration. We can conceive (s, x) as modeling an event that begins at time-point s and extends for a duration of x (units) thereafter. IVLS3 is the direct-product group IVLSj (8) IVLS 2. Each member of IVLS3 is a pair (il5i2), where ilis a member of IVLSj (representing a number of beats between time-points) and i2 is a member of IVLS2 (representing a quotient of durations). (i ls i 2 ) and (Ji,j 2 ) combine in the direct-product group IVLS3 according to the rule (i 1 ,i 2 )(Ji»J2) = fli + Ji^zJa)- int3(( s » x )>(t,y)) is defined as (int^s,!), int2(x,y)), that is, loosely speaking, as (t — s,y/x). To put it another way, if int3((s, x), (t, y)) = Oi, i2), then event (t, y) begins i t units of time after event (s, x) and extends for i2 times the extent of event (s, x). The reader can take it on faith that GIS3 as constructed above is indeed a GIS. It will not be necessary to produce an analytic example, I think, in order to convince the reader that this GIS is a useful theoretical tool. It combines two aspects of our mensural rhythmic intuition, as they impinge upon us conjointly, into one compound structure. We are still and again presuming a fixed unit of time here, by which we measure durations and distances-betweentime-points. In both example 3.3.1 and example 3.3.2 we combined a given OK^ with a given GIS2 in a certain manner, obtaining a new GIS that modeled the conjoint action of the two given GIS structures. We can make our procedure formal and general, as a means of combining any given GlSi and any given GIS2 into a "direct-product GIS." The following definition gives the procedure. 3.3.3 DEFINITION: Given G^ = (S l5 IVLS^intJ and GIS2 = (S2, IVLS2, int2), the direct product of GISa and GIS2, denoted GIS1
45
3.4.1
Generalized Interval Systems (2)
It is straightforward to verify that GIS3, as defined above, is indeed a GIS, i.e. that GIS3 satisfies Conditions (A) and (B) of Definition 2.3.1. This finishes our investigation into methods of constructing new GIS structures from old in a general abstract setting. Now we shall see how the notions of "transposing" and "inverting" elements of a space S arise naturally in any GIS; we shall see how operations of transposition and inversion interrelate characteristically with intervallic structure, and we shall explore how the operations combine among themselves. We shall also explore other characteristic operations, the "interval-preserving operations"; these may or may not be the same as the transposition operations, depending upon whether the group of intervals is or is not commutative.7 3.4.1 DEFINITION: Given a GIS; given an interval i of IVLS; then transposition by i, denoted Tj, is defined as a transformation on S as follows. Given a sample element s of S, the i-transpose of s, T;(s), is that unique member of S which lies the interval i from s. That is, T;(s) is well defined by the equation int(s,T,(s)) = i. This definition conforms to our abstract intuition that the i-transpose of a given element s should lie the interval i from s. The definition also conforms to the way in which we already use the word "transposition" in connection with some GIS structures, namely those involving pitches and pitch classes. T;(s) is indeed well defined by the equation within the definition. Condition (B) of 2.3.1 assures us that given i and s, there exists a unique t such that int(s, t) = i; it is precisely this t which we are now calling "the i-transpose of s," Tj(s). 3.4.2 THEOREM: Each Ts is an operation; that is, it is 1-to-l and onto as a transformation on S. The transposition operations form a group of operations on S. That group is anti-isomorphic to the group of intervals. Specifically, let us consider the map f, defined from IVLS onto the family of transpositions by the formula f(i) = T^ then f is an anti-isomorphism. That is, f is 1-to-l as well as onto; and TjTj = T^. Pr00/(optional): We shall prove the assertions of the theorem in an order different from that in which the theorem states them. First we show that f is an anti-homomorphism, i.e. that TjTj = T^. Given intervals i and j, given a sample s in S, then we write int(s, Tj(Tj(s))) as the group product of the two intervals int(s, Tj(s)) and int(Tj(s), T;(Tj(s))), using Condition (A) of 2.3.1. Now int(s, Tj(s)) = j, by the defining equation of Definition 3.4.1. And by the same equation, int(Tj(s), Tj(Tj(s))) = i. Hence 46
7. All the groups in our specific examples of GIS structure so far have been commutative. Later on, in chapter 4, we shall study a non-commutative GIS of musical interest.
Generalized Interval Systems (2)
3.4.4
int(s, Ti(Tj(s))) is expressed as the group product of the two intervals j and i. That is, int(s,Ti(Tj(s))) = ji. Thus Tj(Tj(s)) lies the interval ji from s. So it is equal to TJJ(S). We have shown: For any sample s, TjTj(s) = TJJ(S). So the transformation TjTj has the same effect on S as does the transformation T^; the functional equation TjTj = T^ is true, as claimed. So the map f is an anti-homomorphism. We show now that it is an antiisomorphism. We have only to show that f is a 1-to-l map. Supposing that the functional equation Ts = Tj is true, we wish to prove that i and j must be the same interval. Fix any s. Since Ts = Tj by assumption, Tj(s) = Tj(s). Then, by Definition 3.4.1, i = int(s,Ti(s)) = int(s,Tj(s)) = j, which is what we had to show. It remains only to prove that each Tj is an operation, and that the family of transpositions is a group of operations. To prove all this, it suffices to show that the family of transpositions satisfies Conditions (A) and (B) of 1.3.4 earlier, namely (A) that the family is closed and (B) that for each Tj there is a TJ satisfying TjTj = TjTj = 1. Condition (A) is evident from the formula TjTj = Tjji The composition of two transpositions is a transposition. In order to prove Condition (B), we shall prove a lemma: Te is the identity operation 1 on S. That is true since, given s in S, Te(s) is the member of S which lies the identity interval from s; hence Te(s) = s. Or Te(s) = l(s); that being the case for any sample s, Te = 1 as asserted by the lemma. Now we can prove Condition (B). Given any interval i, take j = i"1. Then ji = ij = e. Tj is the transformation demanded by Condition (B): TjTj = Tjs = Te = 1; likewise TjTj = 1. q.e.d. 3.4.3 THEOREM: Fix some referential member ref of S; then LABEL(Ti(s)) = LABEL(s) • i. Proof: LABEL(Ti(s)) = int(ref, T,(s)) by definition of LABEL in 3.1.1, = int(ref, s)int(s, Ti(s)) by 2.3.1 (A), = LABEL(s)int(s, Tj(s)) by 3.1.1, = LABEL(s)-i by 3.4.1. Theorem 3.4.3 tells us that no matter what ref is chosen for LABELing purposes, the label for the i-transpose of s is the label of s, right-multiplied by i in IVLS. The natural question arises: What happens when we left-multiply ref-LABELs by i? We shall explore that right now. 3.4.4 DEFINITION: Fix some referential member ref of S. Given any interval i, the transformation Pj (more exactly P[ef)is defined on S by the formula LABEL(Pj(s)) = i • LABEL(s), which is to say the relation int(ref, Pi(s)) = i • int(ref, s).
47
3,4.5
Generalized Interval Systems (2)
Given ref, i, and s, Condition (B) of 2.3.1 tells us that a unique member of S, call it t, satisfies the relation int(ref, t) = i • int(ref, s). Definition 3.4.4 takes that unique t, given ref, i, and s, and calls it Pj(s). Note that the specific value of Pj(s) depends on ref as well as on i and s. In contrast, the value of T.(s) was well defined in 3.4.1 independent of any choice of ref. 3.4.5 THEOREM: The transformations P. form a group of operations isomorphic to IVLS under the map f(i) = P}. In particular, the formula PjP. = Pr is valid. Proof (optional): LABEL(Pj(p.(s))) = i • LABEL(P.(s)) = i • (j • LABEL(s)) = (ij) • LABEL(s) = LABEL'S)). The elements Pj(Pj(s)) and Py(s) thus have the same LABEL (lie the same interval from ref). So they are the same: PjPj(s) = Pjj(s). This being the case for any sample s, the functional equation PjP. = P.. is true. The map f of the Theorem is thereby a homomorphism of IVLS onto the family of transformations P.. To prove that f is an isomorphism, it remains only to show that f is 1-to-l. Suppose P. = P.; we are to infer that i = j. Fix any s; then i • LABEL(s) = LABEL(pj(s)) = LABEL(Pj(s)) by supposition; and that = j • LABEL(s). In sum, i • LABEL(s) = j • LABEL(s). Hence, multiplying that equation through on the right by the inverse of LABEL(s), i = j as desired. We can now use arguments just like those we used in the proof of 3.4.2, to show that the family of P. is a group of operations. The operations P. have a special property. They are what we shall call the "interval-preserving" transformations. 3.4.6 and 3.4.7 develop the formalities. 3.4.6 DEFINITION: Given a GIS (S, IVLS, int), a transformation X on S will be called "interval-preserving" if X has this property: For each s and each t, int(X(s), X(t)) = int(s, t). 3.4.7 THEOREM: No matter what ref is chosen, the interval-preserving transformations on S are precisely the P.. Proof (optional): We show first that P. preserves intervals. We can write inters), P,(t))
=LABEL(P i(s))-1LABEL(Pi(t)) by 3.1.2, =(i • LABELS(s))-!(i • LABEL(t)) =(LABEL(s)~1 • i-])(i • LABEL(t)) =LABEL(s)-1LABEL(t) =int(s, t) 48
by 3.4.4,
by 3.1.2.
Thus P. preserves intervals. Now suppose X is any interval-preserving
Generalized Interval Systems (2)
3.4.8
transformation on S. We shall show that there exists some interval i such that X-P,. The i we want here is LABEL(X(ref)) = int(ref, X(ref)). Given any s, we can then write LABEL(X(s)) = int(ref, X(s)) = = = = =
int(ref,X(ref))int(X(ref), X(s)) via 2.3.1 (A), i • int(X(ref), X(s)) by construction of i here, i • int(ref, s) because X is interval-preserving, i • LABEL(s) by the definition of LABEL, LABEL(Pi(s)) via 3.4.4.
In sum, we have LABEL(X(s)) = LABEL(Pj(s)). Since X(s) and Ps(s) have the same LABEL, we infer that X(s) = Pj(s). Since s here is an arbitrary sample member of S, X = Pi as a transformation on S. Thus our intervalpreserving X is in fact this particular P{. q.e.d. Because of 3.4.7 we can conceive the transformations P5 as somewhat less dependent on the choice of ref. It is true that a transformation labeled "Pj" by one choice of ref might be labeled "Pj" by another choice of ref. However the interval-preserving transformations en masse, literally "as a group," remain the same family of transformations en masse, no matter what ref is chosen. The interval-preserving property does not depend on the choice of ref, and that property is sufficient to define the family of transformations as a group. 3.4.8 THEOREM: Given an interval i, Conditions (A) through (D) below are all logically equivalent: If any one of them is true, then they are all true. (A): T; preserves intervals. (B): For some choice of ref, Tj = P}. (C): For any choice of ref, Tj = Pj. (D): i is central in IVLS. That is, i commutes with every j in IVLS (1.8.2). Proof (optional): Suppose (A) is true; we prove that (C) follows. Fix any ref. Since Tt preserves intervals by assumption, 3.4.7 tells us that Tj = Pj for some j. For any s, LABEL(s) • i = LABEL(T;(s)) by 3.4.3 that = LABEL(Pj(s)) since T, = Pjj and that = j • LABEL(s) by 3.4.4. In sum, LABEL(s) • i = j -LABEL(s) for any s. Consider s = ref in particular LABEL(ref) • i = j • LABEL(ref). But LABEL(ref) = int(ref, ref) = e. Henc i = j. Tj = Pj as desired. Clearly the truth of (C) entails the truth of (B). Now suppose (B) is true; we prove that (D) follows. We are supposing Ts = Pj for some ref. Then for every s, LABEL(Tj(s)) = LABEL(Pj(s)). Then for every s, LABEL(s) • i = i • LABEL(s) (3.4.3 and 3.4.4). It follows that i commutes with every j, which is Condition (D) as desired. For given any j, find the s which lies the interval j from ref; then LABEL(s) = j; substituting j for LABEL(s) in the most recent equation involving i, we obtain ji = ij; i commutes with the given j.
49
3.4.9Generalized Interval Systems (2)
Now we close the logical chain by showing that the truth of (D) entails the truth of (A). When we have done this, we shall have shown that (A) implies (C), (C) implies (B), (B) implies (D), and (D) implies (A); hence the truth of any one entails the truth of all the others. Supposing (D) is true, then, we show that (A) will be true. Fix any ref. Given any s and any t, we write int(Ti(s), Tj(t)) = LABEL(Ti(s))-1LABEL(Ti(t)) = (LABEL(s) • i)~1(LABEL(t) • i) = (r1 • LABEL(s)'1) (LABEL(t) • i) = i"1 • (LABEL(s)-1LABEL(t)) • i = i - 1 -mt(s,t)-i = int(s, t)
by 3.1.2 by 3.4.3
by 3.1.2 by the assumption
of Condition (D), that i is central. In sum, assuming Condition (D), then int(T;(s), T;(t)) = int(s, t) for every s and t. Or, assuming Condition (D), Tj will be interval-preserving. Or: (D) implies (A) as desired, q.e.d. 3.4.9 COROLLARIES: (A): In a commutative GIS (a GIS whose group of intervals is commutative), the transposition operations are precisely the interval-preserving operations. (B): In a non-commutative GIS, there exist transpositions that do not preserve intervals, and there exist interval-preserving operations that are not transpositions. 3.4.10 THEOREM: Any transposition operation commutes with any intervalpreserving operation. Proof: Fixing any ref, consider T; and Pj. We apply 3.4.3 and 3.4.4 to various LABELS. Taking any sample s, we have LABEL(Pj(Ti(s))) = j • LABEL(Tj(s)) = j • (LABEL(s) • i) = (j • LABEL(s)) • i = LABEL(Pj(s)) • i = LABEL(Tj(Pj(s))). Thus PjTj(s) and T,Pj(s) have the same LABEL; they lie the same interval from ref; so PjTj(s) = TjPj(s). This being the case for any sample s, the functional equation PjTj = TjPj is true: Ts commutes with Pr q.e.d.
50
We are now ready to define and study "inversion operations" on an abstract GIS. For each u and each v in S (v may possibly equal u), we shall define an operation I*, which we shall call "u/v inversion." Figure 3.7 helps us visualize an appropriate definition for the operation, conforming to our spatial intuitions. The figure shows how we conceive any sample s and its inversion I(s) (short for !„($) here) as balanced about the given u and v in a certain intervallic proportion. I(s) bears to v an intervallic relation which is the inverse of the relation that s bears to u. The inverse proportion is symbolized by the mirror
Generalized Interval Systems (2)
3.5.2
FIGURE 3.7 relation of the two arrows on figure 3.7. The interval from v to I(s), which is the inverse of int(I (s), v), will then be the same as the interval from s to u. That is, we intuit int(v, I(s)) = int(s, u). We can use this equation to define !„ formally in any GIS. 3.5.1 DEFINITION: Given any u in S and any v in S, the operation !„ of u/v inversion is defined by the equation int(v, Iu(s)) = int(s, u) for all s. The operation is well defined by the equation: Given any s, set i = int(s, u) and find the unique t which lies the interval i from v. That t, which satisfies the equation int(v, t) = int(s, u), is precisely the value for IJ^s). We have been referring to the "operation" I* prematurely; so far we have constructed a transformation, but we have not verified that the transformation is indeed an operation, i.e. onto and 1-to-l. The reader may verify, as an exercise, that I* as defined is onto and 1-to-l. (Given t, find an s such that ru(s) = t. Prove that if IJ(s') = IJ(s), then s' = s.) 3.5.2 THEOREM: Fix a referential element ref of S. Set i = LABEL(v) and j = LABEL(u). Then LABELTOs)) - i • LABEL(s)'1 • j. Proof: To save space, we write "I" for "!„" here. int(v, I(s)) = int(s, u) (3.5.1). So int(v, ref )int(ref, I(s)) = int(s, ref )int(ref, u) (2.3.1 (A)). Thence, LABEL(v)'1LABEL(I(s)) = LABEL(s)~1LABEL(u) (3.1.1; 2.3.2) Or: Or:
T1 • LABEL(I(s)) = LABEL(s)'1 • j LABEL(I(s)) = i • LABEL(s)"1 • j
q.e.d.
51
3.5.3
Generalized Interval Systems (2)
The formula of this theorem is very useful despite the dependence of all the LABELs (including i and j) on a possibly arbitrary ref. We shall use the formula to analyze this question: When are lvn and I* the same operation on S? In the familiar GIS of twelve chromatic pitch classes, for instance l£ = l£{ = IA' = ID» = IB'anc* so on- '^iat *s' ^^ mversi°n nas the same effect on any sample pitch class as does F|/F# inversion, or A/Df inversion, or DJt/A inversion, or B/C| inversion, and so on. In this special GIS one can intuit that l£ and I* will be the same operation if and only if the pitch class w is the C/C inversion of the pitch class x. One might thereby conjecture that I* and I* will be the same operation, in a general GIS, if and only if the thing w is the u/v inversion of the thing x. This conjecture is valid if the GIS is commutative. When the GIS is not commutative, we must be content with the broader view provided by the following theorem. 3.5.3 THEOREM: I* = I* as an operation on S if and only if w = I*(x) and the interval int(x, u) is central. Proof (optional): Imagine ref fixed. Let i, j, k, and m be the respective LABELS for v, u, w, and x. Then, via 3.5.2, given any s, LABEL(I^(s)) = i LABEL(s)-1 j, while LABEL(I*(s)) = k LABEL(s)-1 m. Hence the condition that I* be the same operation as I* is equivalent to the condition that i LABEL(s)'1 j = k LABEL(s)-1 m for all s in S. Now as s runs through the various members of S, the inverse of its LABEL runs through all the various intervals in IVLS. Hence the condition under discussion is equivalent to the condition that inj = knm
for every n in IVLS.
And that condition is equivalent, via group theory, to Condition (A) below. (A): (k-1i)n = nOnj"1)
52
for every n in IVLS.
In sum, F[ = I* as an operation if and only if Condition (A) above is satisfied. Now we shall prove that Condition (A) is satisfied if and only if w = I*(x) and int(x, u) is central. That will prove the theorem as stated. Suppose, then, that Condition (A) is true; we shall show that w = IJJ(x) and int(x, u) is central. Condition (A) being true by supposition, it is true for n = e; therefore k~ ! i = mj"1. Let us call this interval c. Condition (A) then tells us that en = nc for every n in IVLS, so c is central. c was taken equal to mj"1. It turns out that c also equals j"1!!!. To see that, we write mj"1 = c; thence m = cj; thence, since c is central, m = jc; thence j-1m = c as asserted.
Generalized Interval Systems (2)
3.5.5
Let us review: Assuming Condition (A), we have so far shown that k 4 = mj-1 = j^m = c is central interval. Now k~M = LABEL(w)~1LABEL(v) = int(v, w), via 3.1.2. Likewise j-1m = int(x, u). Thus we have shown: int(v, w) = int (x, u) and int(x, u) = c is central. Now the relation int(v, w) = int(x, u) is exactly the relation which tells us that w = IJj(x) (Definition 3.5.1). Thus, assuming Condition (A), we have proved that w = I^(x) and int(x, u) is central as desired. Now we prove the converse half of the theorem: Supposing that w = I*(x) and that int(x, u) is central, we prove that Condition (A) is satisfied. w int(v, w) LABEL(w)-1LABEL(v) k~U
= = = =
I*(x) int(x, u) LABEL(u)~1LABEL(x) j-1m
(by supposition). So (3.5.1). Or: (3.1.2). Or: (meaning of i, j, k, m).
Furthermore, we have supposed that j^m, which is LABEL(u)~1LABEL(x), which is int(x, u), is a central interval. Let us call this central interval c. j^m = c; thence m = jc; thence m = cj; thence mj"1 = c. So k H = mj
l
= c, a central interval.
c being central, en = nc for every n in IVLS. Substituting k~!i = mj"1 for c, we obtain (k~ ] i)n = n(mj-1) And that is precisely Condition (A),
for every n in IVLS. q.e.d.
We used ref and LABEL in our proof of Theorem 3.5.3. Note, however, that the statement of the theorem does not depend on a choice of ref. 3.5.4 CORROLARY: I* = IJJ if and only if int(v,u) is central. Proof: Applying the formula of Definition 3.5.1 to the algebraic truism int(v, u) = int(v, u), we infer that u = I*(v). Then, by the logic of Theorem 3.5.3 just proved, 1^ = IJJ if and only if int(v, u) is central. The corollary tells us that in a general GIS, v/u inversion may well not be the same operation as u/v inversion, despite the relations v = I*(u) = I"(u); u = I^(v) = IJJ(v). The operations I* and l^ both transform u to v, and v to u. But there may be some other s, other than u or v, such that IJj(s) is not the same element as I^(s). Indeed the corollary assures us there will be some such s if int(v, u) is not central. These considerations indicate how carefully and rigorously we must proceed hereabouts; intuitions based on our familiarity with a number of commutative GIS structures will not always be reliable. 3.5.5 COROLLARIES: In a commutative GIS, I* always = I|J; generally, I* = I* if and only if w = I»(x).
53
3.5.3
Generalized Interval Systems (2)
In a non-commutative CIS, there will always be some inversion operation Iy which is not the same as 1^. (For there will always be some int(v, u) which is not central.) Now we shall see how inversion operations I* combine with transpositions Tn and interval-preserving operations P. 3.5.6 THEOREM: For any transposition Tn and any inversion I*, (A): T n l^ = I* where x = Tn(u). (B): I v u T n = I* where w = T-^V). (C): Tn commutes with 1^ if and only if n is central and nn = e. Proof (optional): We shall fix some ref and use LABELs to help our computations. Let i = LABEL(v); let j = LABEL(u). Then LABEL(TnIvu(s)) = LABEL(Ivu(s)) - n = i-LABELS)-1-j-n = LABEL(I^(s)),
(3.4.3) (3.5.2)
where x is the member of S whose LABEL is jn (3.5.2). Since LABEL(x) = jn and LABEL(u) = j, x = Tn(u) (3.4.3). Now Tnl*(s) I*(s) have the same LABELs, via the chain of computations above. Hence Tnl*(s) = I*(s). (Both lie the same interval from ref.) Since s was an arbitrary sample member of S, Tnl^ = I* as an operation. This proves (A) of the theorem. To prove (B), we start with a similar chain of computations. LABEL(PuTn(s)) = = = =
54
iCLABELCT^s)))-1] i(LABEL(s) • n)-1] in~1LABEL(s)-1j LABEL(I-(s)),
(3.5.2) (3.4.3)
where w is the member of S whose LABEL is in -1 (3.5.2). Since LABEL(w) = in"1 and LABEL(v) = i, w is the n"1 transpose of v (3.4.3). Since T"1 = T"1, we can write w = T~!(v). (The map of n to Tn is an anti-isomorphism; n"1 maps to T"1.) We go on to infer the operational equality of the operations I*Tn and 1^, exactly in the way we inferred an analogus equation when proving (A) of the theorem. This proves (B) of the theorem. Using the formulas of (A) and (B) that we have now established, we see that Tnl^ = I*Tn if and only if I* = I* x and w being as in (A) and (B) of the theorem. By Theorem 3.5.3, this will be the case if and only if w = I*(u) and the interval int(u, x) is central. That will be so, according to 3.5.1, if and only if int(v, w) = int(u, x) and int(u, x) is central. But int(u, x) = n, since x = Tn(u), and int(v, w) = n"1, since w = T"1^). So, in sum, Tn will commute with I* if and only if n = n"1 and n is central. This proves (C). q.e.d.
Generalized Interval Systems (2)
3.5.7
(C) of the theorem shows that, given any interval n in a general GIS, either Tn commutes with every inversion operation or Tn commutes with no inversion operation. In the familiar GIS of twelve chromatic pitch-classes, T6 commutes with every inversion operation: If you invert and then transpose by a tritone, the net result is the same as if you transpose by a tritone and then invert (about the same center or axis). In that GIS, no other interval of transposition has this property, save for the trivial interval of zero. (T0 is the identity operation.) In fact, no other Tn in that GIS will commute with any inversion operation. (C) of the theorem shows us that this situation is related to the fact that 6 + 6 = Omod 12, while n + n does not = 0 mod 12 for any other non-zero interval mod 12. Theorem 3.5.6 gave us insight into how inversions combine with transpositions. An analogous theorem will give us analogous insight into how inversions combine with the interval-preserving operations P. 3.5.7 THEOREM: For any interval-preserving operation P and any inversion Iu»
(A): PI* = I? where w = P(v). (B): i;;P = I* where x = P~1(u). (C): P commutes with !„ if and only if P = Tc for some transposition Tc such that c is central and cc = e. Proof (optional): We fix a referential element ref. Setting n = int(ref, P(ref)) = LABEL(P(ref)), we write P = Pn in the manner of 3.4.4 earlier. We can then manipulate pertinent LABELs to prove (A) and (B) exactly as we proved (A) and (B) for Theorem 3.5.6 above. To prove (C), we begin in a manner similar to that by which we proved 3.5.6 (C). Using (A) and (B), we note that PI* = I^P if and only if I£ = I*, where w and x are as in (A) and (B). Via 3.5.3, this will be the case if and only if int(v, w) = int(u, x) and int(u, x) is central. Now LABEL(u)=j and, since x = P~'(u) = Pn-»(u), LABEL(x) = n-1 • LABEL(u) = n-1j (3.4.4). Therefore LABEL(x)~1LABEL(u) = (n'M)"1 j = T1 nj. And int(u, x) is precisely LABEL(x)"1 LABEL(u) (3.1.2). So int(u, x) = j"1 nj. We have now showed: P = Pn commutes with I* if and only if int(v, w) = int(u,x) = j-1nj and the interval j-1nj is central. A little group theory provides the proof for the following lemma: The element j-1nj of a group is central if and only if n is central. Thus either n is central, in which case j"1 nj is of course simply n; or else n is not central, in which case j~*nj is not central. We have now proved: P = Pn and I* commute if and onlyifint(v,w) = int(u,x) = n and n is central. The rest follows from 3.4.8 and 3.5.6(C). q.e.d. We have now seen how inversion operations combine with intervalpreserving operations. Earlier we saw how inversions combined with transpositions (3.5.6), and how transpositions commuted with inversion-preserving operations (3.4.10). Earlier still, we noted that the transpositions formed a
55
3.5.8
Generalized Interval Systems (2)
group of operations among themselves (3.4.2), combining according to a certain formula; the interval-preserving operations also formed a group among themselves (3.4.5) combining according to another formula. It remains to explore how the inversion operations combine with each other, and we proceed to do so.
3.5.8 THEOREM: Fix ref, and let the LABELs of v, u, w, and x be respectively i, j, k, and m. Then TVTW = rp— IT~IJ A A x u x
im k
Proof: Given any s, then 3.5.2 tells us that LABEL(I^(s)) = i-LABEL(s)- 1 -] while 1 LABEL(I*(s)) = k • LABEL(s)- • m. Hence LABEL(IvuI-(s)) = KLABELa^s)))-1] = i(k • LABEUXT1 • mr'j = i(m-1LABEL(s)k~1)j = (im-1)LABEL(s)(k-1j) = LABEUPrjT-^s)) (3.4.3; 3.4.4). In sum, I*I*(s) and P^T^s) have the same LABELs, and are therefore the same element of S. Since s was an arbitrary sample member of S, the functional equation of the theorem is true, q.e.d. 3.5.9 COROLLARY: I|J is the inverse operation to I*. Proof: Given u and v, take x = v and w = u in the formula of Theorem 3.5.8 above. Then m = i and k = j, as those intervals are defined in that theorem. So im"1 and k-1j are both equal to e; the formula of the theorem tells us in this special case that !„!" = PeTe, which is of course the identity operation. By the symmetry of the situation (reversing the roles of u and v), PJI* is also the identity operation, q.e.d. 3.5.10 COROLLARIES: Let T and I be any transposition operation and any inversion operation in a commutative GIS. Then
(A): r1 = I and (B): IT = T-'I. Proofs: (A) follows at once from 3.5.9 and the first remark of 3.5.5. To prove (B), set J = IT. Via 3.5.6(B) we know that J is an inversion operation. Then, invoking (A) just proved above, we infer that J = J"1. It follows: IT = J = J-1 = (IT)"1 = T'1!'1 = T~]I; the last step is again a consequence of (A) just proved, q.e.d.
56
We have now explored how various types of operations on the space of an abstract GIS compose among themselves and with each other. Standing back
Generalized Interval Systems (2)
3.5.11
from the niceties of the specific formulas involved, we can get a useful global picture. 3.5.11 THEOREM: Let PETEY be the family of all operations on S that can be expressed as (functionally equal to) something of form PT, where P is some interval-preserving operation and T is some transposition. Let PETINV be the family PETEY plus the family INVS of all inversion operations. Then (A) PETEY is a group of operations and (B) PETINV is also a group of operations. Proof (optional): We already know that PSVS, the family of intervalpreserving operations, and TNSPS, the family of transpositions, are each groups of operations (3.4.5; 3.4.2). Let PT and PT' be any two members of PETEY. Set P" = PP' and T" = TT. Since PSVS and TNSPS are groups, P" is interval-preserving and T" is a transposition; then P"T" is a member of PETEY as PETEY was defined. Furthermore, the composition of the given PT with the given FT' is precisely P"T", this member of PETEY. For (PD(FT') = P(TP')T = P(PT)T' (3.4.10) = P"T". So PETEY is a closed family of transformations. To prove PETEY a group, it suffices via 1.3.4 to show that PETEY-asdefined contains the inverse of each of its member operations. Given PT in PETEY, then P"1 and T-1 are respectively members of PSVS and TNSPS, so that p-1T-1 is a member of PETEY-as-defined. And p^T"1 is the inverse of the given PT: PT = TP (3.4.10), so PT(P~1T~1) = TP(P~1T~1) = 1 and (p-iT-i)PT = (P-1T-1)TP = 1. So (A) of the theorem is proved. We use the criteria of 1.3.4 again to prove (B) of the theorem. We know that PETEY, since it is a group, contains the inverse of each of its members; we also know via 3.5.9 that INVS contains the inverse of each of its members. Hence PETINV, the set-theoretic union of the two families PETEY and INVS, contains the inverse of each of its members. It remains only to prove that PETINV is a closed family of operations. Suppose that X and Y are members of PETINV; we have to show that XY is (operationally equal to) a member of PETINV. We can distinguish four possible cases, which we take up one at a time below. Case 1: X and Y are both members of PETEY. Then XY, being a member of PETEY, is a member of PETINV. Case 2: X is a member of PETEY and Y is a member of INVS. Say X = PT and Y = I. Now TI is some inversion-operation J (3.5.6(A)). And PJ is some inversion-operation K (3.5.7(A)). Then XY = PTI = PJ = K is a member of INVS, and therefore a member of PETINV as desired. Case 3: X is a member of INVS and Y is a member of PETEY. By an argument analogous to that of Case 2, now using 3.5.6(B) and 3.5.7(B), we conclude that XY is a member of INVS, and hence of PETINV as desired. Case 4: X and Y are both members of INVS. Then XY is a member of PETEY (3.5.8). So XY is a member of PETINV as desired, q.e.d.
57
3.6.1
Generalized Interval Systems (2)
We have seen that transpositions are naturally related in a number of ways to interval-preserving operations. We might conjecture that inversions should be naturally related to "interval-reversing" transformations, in the sense of the following definition. 3.6.1 DEFINITION: A transformation Y on the space S of a GIS will be called interval-reversing if int(Y(s),Y(t)) = int(t,s) for all s and all t in S.
There is something to our conjecture above. Specifically, if the GIS is commutative, then the inversions are precisely the interval-reversing operations on S. But if the GIS is now-commutative, then there will not be any intervalreversing transformations at all! We shall now prove these facts, starting with a lemma. 3.6.2 LEMMA (optional): Let Y be an interval-reversing transformation; let ref be fixed; then there is an interval i such that LABEL(Y(t)) = i • (LABEL(t))-1 for every t in S. Proof: int(Y(s), Y(t)) = int(t, s) by supposition. So LABEL(Y(t))~1LABEL(Y(s)) = LABEL(s)~1LABEL(t)
(3.1.2).
Take s = ref in the above equation, so that LABEL(s) = e. Set i = LABEL(Y(ref)) = LABEL(Y(s)) in the above equation. Then LABEL(Y(t))-1 • i = LABEL(t). So LABEL(Y(t))~1 = LABEL(t) • T1 and LABEL(Y(t)) = i • LABEL(t)-1, for any t. 3.6.3 THEOREM (optional): If IVLS is commutative, then the inversion operations reverse intervals, and every interval-reversing transformation is some inversion-operation. Proof: Fix some ref. The result of Lemma 3.6.2, in conjunction with the formula of Theorem 3.5.2, tells us that any interval-reversing transformation must be some inversion, specifically some Vtcf. It remains to show that any I* reverses intervals. Setting i = LABEL(v) and j = LABEL(u), we can write
58
intai(s), W)) = LABELS))-1 LABEL(I^(s)) = (iLABEL(t)~1j)-1(iLABEL(s)-1j) = j~1LABEL(t)i-1iLABEL(s)-1j = LABEL(s)~1LABEL(t),
(3.1.2) (3.5.2)
Generalized Interval Systems (2)
3.6.4
since IVLS is commutative! And that = int(t,s)
via 3.1.2.
q.e.d.
3.6.4 THEOREM (optional): If IVLS is non-commutative, then there exists no interval-reversing transformation on S. Proof: We suppose that Y is an interval-reversing transformation and arrive at a contradiction. For all s and all t, LABEL(Y(t))~1LABEL(Y(s)) = LABEL(s)-1 LABEL(t), as in the proof for Lemma 3.6.2. Having the formula of that lemma at our disposal now, we can substitute for the LABELs of Y(s) and Y(t) in the above equation, using the special interval i of the lemma. We get the new equation (i(LABEL(t)r1)-1 • iLABEL(s)-1 = LABEL(s)~1LABEL(t). Or: (LABELCOr^iLABELts)-1 = LABEL(s)~1LABEL(t). Or: LABEL(t)LABELCs)-1 = LABEL(s)~1LABEL(t). But that equation, holding for all s and t, says that IVLS is a commutative group. And that contradicts the premise of the theorem, q.e.d.
59
4
Generalized Interval Systems (3): A Non-Commutative GIS;
Some Timbral GIS Models
During the discussion of transpositions, interval-preserving operations, and inversions, the reader may have been puzzled by the care with which noncommutative GIS structures were separated from commutative. After all, we have so far not encountered any specimen GIS which is non-commutative. Why should we be concerned at all about the non-commutative case? Why not save ourselves some trouble, and just stipulate in the definition of a GIS that the group IVLS should be commutative? The work of the present chapter will respond to these concerns by exploring a musically significant noncommutative GIS. I have already presented some of the work elsewhere, but it will have a special impact in the present context.1 4.1.1 DEFINITION: By a time span, we will understand an ordered pair (a, x), where a is any real number and x is any positive real number. The pair of numbers is understood to model our sense of location and extension about a musical event that "begins at time a" and "extends x units of time" thereafter. The family of all time spans will be denoted TMSPS. We have already encountered one rhythmic GIS whose objects were certain time spans; that was example 3.3.2. There, we restricted the values for the numbers a to integers, and we restricted the values for the numbers x to certain proportions. Using the same direct-product construction, we could also construct a GIS for time spans in which the number a could assume any rational value, and the number x any positive rational value. Using the direct-
60
1. David Lewin, "On Formal Intervals between Time-Spans," Music Perception vol. 1, no. 4 (Summer 1984), 414-23.
Generalized Interval Systems (3)
4.1.2
product construction, we can also construct a GIS for all time spans in the manner of 4.1.2 following. 4.1.2 EXAMPLE: Take S = TMSPS. Take IVLS to be the direct-product group of the real-numbers-under-addition by the positive-reals-undermultiplication. Define the function int, from S x S into IVLS, by the formula int((a,x),(b,y)) = (b-a,y/x). Then (TMSPS, IVLS, int) is a GIS. It is commutative. The interval (b — a, y/x) measures our presumed sense that time span (b, y) begins b — a units after time span (a, x) and lasts y/x times as long. This commutative GIS is useful and relatively simple, but it is not adequate as a model for the way we perceive time spans interacting under all circumstances. We shall now investigate why that is so. First we shall examine the family of time spans as a conceptual space independent of any particular compositional context; then we shall examine how time spans behave in various specific musical contexts. To begin, then, let us focus on the time span (a, x) as a conceptual object in a conceptual space, modeling our sense that something "begins at time point a" and "extends for x time-units" thereafter. We can ask, what is this absolute conceptual time-unit? In practice, we often proceed as if it were the minute. We do so, that is, when we write metronome marks which reduce various contextual units, in various pieces or passages of music, to fractions of a minute. The minute is not commensurate with our sense of a "beat," but we can use the second for that purpose if we wish, dividing all the metronome numbers by 60. Neither the minute nor the second, though, is very satisfactory as a would-be absolute conceptual time unit; both are derived from certain relative periodic motions of the earth, the sun, and the moon. Scientists today find these motions so erratic and irregular that they use other conceptual units of time for precise measurements. But even those units, deriving from certain sub-atomic motions, are clearly contextual. And that does not even begin to engage other technical problems involving Relativity and quantum mechanics in connection with such sub-atomic "fixed" units of time. In short, if we declare any one time-unit to have absolute conceptual priority, that is a matter of computational convenience, or of scientific, sociological, or religious convention, rather then manifest musical reality. Abandoning this approach, we can make our absolute time-unit a matter of notational structure: We can call it "the brevis" or "the perfection" or "the whole note" or "the notated beat," for instance. But then we are throwing the whole problem back onto some notational convention that is highly restricted socio-historically, a convention that indeed already presupposes a highly structured theory of measuring time by some pre-existing absolute unit. And that will not help us in our inquiry.
61
4.1.2
Generalized Interval Systems (3)
We might try to assert that, though we cannot conceive an absolute timeunit clearly, there will be some clear contextual time-unit, which we can identify and use for theoretical purposes, in any music that we may want to analyze. Such an assertion is reasonable in connection with a large body of music, and not only European music of the Classic-Romantic period. But the assertion is still not valid as a universal proposition about music, unless one is willing to restrict the use of the word "music" circularly, i.e. in precisely this way. Making that restriction would involve at least a broad aesthetic contention. An even then, many critics who might feel no qualms about excluding as "music" say certain improvisations of John Coltrane, or Stockhausen's Aus den sieben Tagen, would feel less comfortable excluding as music certain Tibetan chants, or sections of Elliott Carter's String Quartet no. 1. Figure 4.1 (pp. 64-65) reproduces measures 22-35 of the Carter score. What could one assert as "the" (one clear contextual) time-unit for measures 22-32?2 Figure 4.1 shows that our philosophical musings above do not simply come down to a matter of mensural versus non-mensural perceptions. Measures 22-32 of Carter's piece have a very strong mensural character, despite our difficulty in pinning down "the" beat. The mensural profile of the passage is especially—one might even say unusually—strong within each of the individual instrumental parts. For example, the first violin's A in measure 26 and G in measure 28 each last precisely half as long as every other note in the first violin from measure 22 to measure 30; a player who does not hear this mensural relation will not project the passage effectively. For another example, the B-F|-D-C|-D# of the cello at measure 32 and following is heard not only in syncopation against the otherwise regular half-note beat of measure 33 and following (half-note = MM90), but also as a rubato of the earlier cello melody C-G-E1>-D-E, appearing eleven semitones lower in measures 2729. The earlier melody is presented in notes of constant duration whose beat, every five written eighths, is at MM48, not MM90. A cellist who does not hear the rhythmic relation of the transposed melodies will not project measures 32-35 completely effectively. In sum, the notion of "an" abstract conceptual time-unit, a unit by which we measure the number x of the formal time span (a, x), is a notion fraught with methodological problems. The number a of the time span (a, x), as well as the number x, is measured by our conceptual time-unit. For when we say that we perceive something that "begins at time-point a," we mean implicitly that it
62
2. I am grateful to Jonathan W. Bernard for engaging my interest in this passage through his lecture, "The Evolution of Elliott Carter's Rhythmic Practice," delivered to the meeting at Yale of the Society for Music Theory on November 11, 1983. Bernard's observations engaged many of the rhythmic relations I shall be discussing. The uses to which I shall put those observations, as I expound my CIS-theories, are of course my own responsibility.
Generalized Interval Systems (3)
4.1.2
begins just that number of conceptual time-units after some referential timepoint, "time-point zero." Having noted this, we see that we must discuss not only the conceptual time-unit in this connection, but also the conceptual "time-point zero." What is this abstractly privileged moment that contributes toward measuring the number a of the time span (a, x)? Is it the moment of the Big Bang, or of the Biblical Creation? Is it a completely arbitrary moment very long ago? (And if so, why should we select an arbitrary moment to play a uniquely referential role?) Should we select "time-point zero" by a notational convention, e.g. as the first vertical line on the score of whatever piece we are analyzing at the moment? Or should we presume to assert, explicitly or implicitly, that there must always be some one uniquely privileged moment, in the score or the performance of any passage we want to discuss, which we can unequivocally label as a contextual zero time-point for the occasion? These methodological expedients involve difficulties similar to those discussed above in connection with the referential time-unit. In one way at least, the choice of a zero time-point is less problematic than the choice of a temporal unit: The former choice does not affect the numbers attached to intervals in the GIS of 4.1.2, while the latter choice does affect those numbers. To see this, first suppose that we move our referential zero time-point back by m units into the past. Then the percept that was formerly manifest over the time span labeled (a, x) in the old scheme will now be manifest over the time span labled (a + m, x) in the new scheme: What used to begin a units after (old) time-point zero will now begin a + m units after (new) time-point zero. Similarly, the time span labeled (b, y) in the old scheme will correspond to the time span labeled (b + m, y) in the new scheme. In the GIS of 4.1.2, the interval between the old labels is int((a, x), (b, y)) = (b — a, y/x). In the same GIS, the interval between the new labels is int((a + m, x), (b + m, y)) = (b + m - (a + m), y/x) = (b - a, y/x). So, in transforming each old time span (a, x) to the new time span (a + m, x), we have not transformed the intervals involved: The interval between a pair of transformed spans is exactly the same as the interval between the corresponding pair of spans prior to transformation. That is, int((a + m, x), (b + m, y)) = int((a, x), (b, y)). Now let us suppose we keep the same referential time-point zero but change the unit of measurement so that what was x old units becomes xu new units, the factor u corresponding to the change of scale in measurement. Then percepts formerly corresponding to the time span (a, x) and (b, y) in the old scheme will now correspond to the time spans (au, xu) and (bu, yu) in the new scheme: What used to begin a old units after time zero and extend x old units therefrom will now begin au new units after time zero and extend xu new units therefrom. We can see that this transformation does change the numbers attached to intervals in GIS 4.1.2: int((a, x), (b, y)) = (b - a, y/x), while
63
4.1.2
Generalized Interval Systems (3)
FIGURE 4.1
64
Generalized Interval Systems (3)
4.1.2
FIGURE 4.1 (continued)
65
4.1.2
Generalized Interval Systems (3)
int((au,xu),(bu,yu)) = (bu — au,yu/(xu)) = ((b — a)u,y/x). Intuitively, the second percept we are discussing used to begin b — a units after the first percept; now it begins (b — a)u units after the first percept, the "unit" having changed. Of course the GIS of 4.1.2 knows nothing of "percepts" or "units"; it simply knows that int((a, x), (b, y)) = (b — a, y/x) is not the same pair of numbers as ((b — a)u, y/x) = int((au, xu), (bu, yu)). Lest the host of methodological problems under discussion appear insuperable, we should recall that we can finesse them all by restricting our attention to music in which we can identify and assert a referential time-unit and a referential zero time-point contextually. Then we can use the GIS of 4.1.2 without problems. There are plenty of pieces and passages for which we can sensibly take this tack. On the other hand, there are also pieces and passages in which we cannot identify such referential entities contextually, music which we would agree nonetheless to consider highly structured mensurally, music within which it seems analytically valid—even necessary—to articulate time spans engaged in mensural interrelationships. We have already begun to explore the Carter example in this connection; we shall continue that analysis soon. Another example is provided by Stockhausen's Klavierstiick XL Stockhausen tells the pianist to look at the sheet of music and begin with any group of notes from among nineteen such groups dispersed over the score, "the first that catches his eye; this he plays, choosing for himself tempo ..., dynamic level and type of attack. At the end of the first group he reads the tempo, dynamic and attack indications that follow, and looks at random to any other group, which he then plays in accordance with the latter indications," and so on and on. "When a group is arrived at for the third time, one possible realization of the piece is completed." 3 Each of the nineteen groups is notated quite traditionally as regards pitches and internal rhythmic proportions. But each group might be played at any of six tempi, ranging from very slow to very fast. Indeed, even during one performed realization, any group might be played two different times at two different tempi. The tempo of each performed group (after the first) depends on the instructions which appear at the end of the group just played, which might itself occur at any of the six tempi. In this context it makes no musical sense to speak of "the" referential time-unit, beyond the interior of each performed group at its performed tempo. And yet, mensural relations among time spans from different groups (especially consecutive groups) are highly audible, and therefore at least perceptually functional in any given realization. We have already mentioned, in footnote 3 of chapter 2, other examples of highly mensural music without a fixed time-unit. Nancarrow's Studies for Player Piano contain many pitch-canons involving elaborately changing 66
3. The cited text is from the Performing Directions by the composer on the score (Universal Edition no. 12654 LW, 3d ed., 1967).
Generalized Interval Systems (3)
4.1.2
tempo proportions.4 Ligeti's Poeme symphonique is performed by winding up 100 clockwork metronomes to varying degrees of tension, setting them at a variety of tempi, and releasing them, allowing them to run down over the course of eighteen to twenty minutes.5 The effect includes an ironic poetic commentary, among other things, upon the very issue of the "contextual timeunit." To some extent in all this cited literature, and to a great extent in much of it, any time span has the potential for becoming a local contextual timeunit, setting a local tempo. By "local," I mean here not only over a certain temporally connected section of the total texture, but possibly also within a certain part, instrument, or instrumental group. For example, there is a more than clear mensural structure within the part played by any single metronome within Ligeti's piece. For some less extreme examples let us return once more to figure 4.1, the Carter passage discussed before. The viola moves in notes of constant duration from its entrance at measure 25 up to the middle of measure 35; these local time-units "beat" the tempo of MM 180. The first violin "beats" constant local time-units at MM36 over measures 22-30, except for the A of measure 26 and the G of measure 28 which, as observed earlier, are each half the local time-unit in duration. At measure 33 the first violin starts to project a new constant local time-unit, that beats at MM90. The cello beats constant local time-units at MM 120 over measures 22-26; then over measures 27-31 it beats new constant local time-units at MM48. Finally at measure 32 and following, it stops moving in notes of constant duration as it plays a pitchvariation on measures 27ff., where MM48 began. This variation was discussed earlier. The second violin beats its own constant local time-unit at MM96 from measure 22 through measure 26. Then over measures 27-30 it runs quickly through a number of local time-units at MM 120, MM 160 (m. 27j), MM96 (m. 28|), MM80 (to be discussed later), and MM60 (m. 30). Finally it settles into a more stable local time unit in measure 31, beating at MM90. 4. Some of Nancarrow's recent work involves irrational proportions like n. For the reader who may at first think such an idea is too bizarre to have any musical meaning, I append a brief exercise in conducting the tempo relation of n. Imagine a horizontal line segment at chest height in front of you and somewhat to your right. (I am supposing that you conduct right-handed.) Move your hand (arm) back and forth along the line at a constant speed, beating a horizontal \ allegro vivo. Now imagine the line segment as a radius of a circle whose center is at the leftmost point of your beat. As you reach the rightmost point of your beat, start swinging your hand (arm around and around the circumference of that circle counterclockwise, taking care always to keep your hand moving at the same constant speed. The amount of time it takes you to swing once around the circle is n times the duration of your earlier horizontal \ measure. 5. The composer specifies very precisely how this is to be done. He also specifies that the piece is to be played after an intermission, so that the returning audience finds the metronomes already underway, with no persons on stage. The metronomes are to be arranged on risers, like a chorus; the slow beaters are at the lowest level and the fast beaters at the highest. I am indebted to Martin Bresnick for supplying me with this report, based on a personal communication from the composer.
67
4.1.2
Generalized Interval Systems (3)
Figure 4.2a collates and tabulates these various metronome marks, that reflect the various tempi beat by the various local time-units in the individual instruments over the passage.
FIGURE 4.2b
68
Figure 4.2b takes the numbers of figure 4.2a and represents them as pitches. This device will help clarify for musicians the numerical ratios involved among those numbers. The number 180, which labels the fastest beat on figure 4.2a, is represented on figure 4.2b by the highest pitch, high C. Slower tempi, in their numerical ratios to MM 180, are represented on figure 4.2b by lower pitches in the corresponding frequency ratios to high C. For instance, on figure 4.2a the opening tempo of the cello is MM 120, 2/3 of the tempo MM 180 coming up in the viola. On figure 4.2b the tempo MM 120 is
Generalized Interval Systems (3)
4.1.2
represented by the opening pitch F5 in the cello, a pitch whose fundamental is 2/3 the frequency of the high C coming up in the viola, the high C which represents the tempo MM 180. The euphony of figure 4.2b is striking. It makes very clear the network of "numerical consonances" displayed by the tempo relations of figure 4.2a, which are also the proportional relations of the various local contextual timeunits. If we imagine a quartet actually playing figure 4.2b, we can get an even clearer idea of how this numerical network affects interactions among the performers. Here are some, and only some, of the relations the players will heed. (1) The 48 of the cello at measure 27 will lie a good numerical octave below the opening 96 of the second violin. (2) The 120 of the second violin at measure 27 will match the opening 120 of the cello. (3) The 120-to-160 relation in the second violin during measure 27 will match in its ratio the 36-to-48 relation between the first violin and the cello thereabouts. (4) The 80-to-60 relation in the second violin over measures 29-30 will retrograde, an octave lower, the 120-to-160 relation discussed in (3) above. (5) The 60-to-90 relation in the second violin, measures 30-31, will match an octave lower the earlier 120-to-180 relation between the cello at the opening of the passage and the viola entrance. (6) The 90 of the first violin at measure 33 will match the 90 of the second violin at measure 31, which in turn will match, an octave lower, the persistent 180 of the viola. (7) The 36-to-90 profile of the first violin part as a whole will match in transposed retrograde (or inversion) the 120-to-48 profile of the cello part up to measure 33. Exactly these numerical relations, and others of the same sort, must be projected to make the rhythmic structure of Carter's passage come to life and communicate, not only between the players and their listeners, but also among the four players themselves. We shall discuss the above seven performance notes some more later on. On figure 4.2b, it is curious how the D[?4 of the cello can be heard as a root whose major harmony is elaborated by the symbolic pitches of the figure over measures 22-30, along with a major seventh and an added sixth. To be sure, it is doubtful that our tonal perceptions of roots, triads, harmonic sevenths, and added sixths can be used to assert analogous functions in the realm of tempo relations. And yet there is a certain suggestiveness in the idea that the cello part of measure 27 and following has a rhythmically "grounding" function somehow analogous to the tonal root function of the symbolic D|?4 on figure 4.2b. This suggestion is useful for the cellist who wants the MM48 tempo at measure 27 and following to feel stable and referential, rather than syncopated and intrusive. The suggestion is also useful for understanding why just this tempo of MM48 (symbolized by the pitch D|?4 on figure 4.2b) is permitted to launch into a wide and free rubato at measure 32 and following in the cello (symbolized by the "cadenza" on figure 4.2b), just at the time the
69
4.1.2
70
Generalized Interval Systems (3)
other three instruments are all finally agreeing upon the new referential tempo MM90-or-180 (symbolized by the prominent pitch class C at m. 32ff. on figure 4.2b). Over the second-violin part of figure 4.2b as a whole, D|» moves clearly to C. But the cello is still refusing to change its earlier D\> for C as we leave the passage, though its D\> has been abandoned. All of these remarks amplify the idea suggested above, that the cellist should refer the rhythm of the part over measures 32-35 not just to the beats of the upper instruments at MM90 but also to the earlier beat of the cello itself, MM48 at measure 27 and following. Figure 4.2b shows by analogy how the symbolic pitches of the "cadenza" in the cello at measures 32-35 are heard not only in relation to the Cs of the upper instruments there, but also in relation to the earlier Dl> of the cello itself at measure 27 following. However interesting it may be to think of MM48 as a numerical "ground" organizing the tempi of measures 22-31, it is still clear that the players of the three upper instruments will not treat the cello part of measures 27-31 as a succession of referential time-units. That is, they will not adjust their own beats to conform in proper proportion with the cello beat of measures 27-31. Nor will the cello and the two violins treat the constant beat at MM 180 in the viola from measure 25 on as a succession of referential timeunits for the entire passage; at least they will not do so until after measure 30. During measures 22-24, in particular, the MM36, MM96, and MM 120 of the two violins and the cello will not be referred to a beat of MM 180 in the viola, for the viola has not yet entered there. Once the viola is in, at measure 25 and thereafter, its constant MM 180 will provide a useful check for the ensemble rhythm without necessarily establishing itself as referential, just as the sustained high C on figure 4.2b provides a useful check for the ensemble's intonation without necessarily establishing itself as a root. Of course MM 180 does eventually become much more referential during measures 33-35, along with its lower octave MM90; just so, on figure 4.2b, the pitch class C comes to dominate the tonal texture. The players may decide on purely notational grounds to use MM 120 (changing to MM 180 by measure 33) or MM60 (changing to MM90 by mea sure 33) as a referential tempo for the entire passage. This makes a certain practical sense for early rehearsals, but it can hardly be recommended for an effective performance. We have all heard and seen players fighting their way through slow lyric lines, supposedly tranquillo like that of the first violin in measures 22-32 or sostenuto e cantabile like that of the cello in measures 27-32, all the while jerking their feet up and down spastically in an erratic approximation of some distantly related notational "beat." These lyric lines are not syncopated, as such a method of production makes them sound to both player and listener. Rather, each line has its own autonomous local timeunit, with respect to which it should project an essentially "first-species" character.
Generalized Interval Systems (3)
4.1.2
Indeed, the search for any one overriding referential time-unit, to govern all of measures 22-31, is bound to fail. It must fail because it misconceives the nature of the temporal space at hand. That space comprises a multitude of locally referential time-units, in various more-or-less consonant numerical relationships among themselves. Only by recognizing that character of the space can one hear the music progress over the passage, and not just "be." What I mean will be amplified by the following review of the earlier performance notes, (1) through (7). (1) The MM48 of the cello at measure 27 will lie a good (numerical) octave below the opening MM96 of the second violin. That is, at measure 27 the cellist should hear the cello line moving at half the rate the second violin has been moving so far. This would be easy to hear if the cello came in a sixteenth-note later. In fact there is no problem within measure 27, getting the attack of the pitch C2 at the right time-point: The player need only continue beating MM 120 up to that point. But once the new melody has entered, its tempo may sound arbitrary and its character "syncopated" unless the player hears the melody taking over, albeit out of phase, from the preceding tempo of the second violin, projecting its own local referential time-unit. (2) The MM 120 of the second violin at measure 27 will match the opening MM 120 of the cello. MM 120 is the notated pulse. Still, the second violin should not simply be playing that pulse (with spastic foot-tapping or the like). What makes measure 27 come alive and communicate in this connection is an exchange of local referential beats, between the two instruments. The second violin takes over the preceding beat of the cello, while the cello—as we noted in (1) above—is about to take over the preceding local beat of the second violin, a rhythmic octave lower (and out of phase). The cellist and the second violinist should hear this "voice-exchange with octave transfer," to hear themselves conversing with each other in a quite familiar tradition of chamber music. Figure 4.2b, showing the exchange of the symbolic pitch classes D|? and F in the two instruments at measure 27, serves as a guide to that tradition here. Just as the players would match those pitch classes if playing figure 4.2b, so they should match their exchange of tempi at measure 27 when playing the Carter passage. (3) The MM 120-to-160 relation in the second violin, later in measure 27, will match the MM36-to-48 relation between first violin and cello hereabouts. Assuming that everything else has gone right so far,this will happen automatically if the second violin plays the dotted eighth (beating MM 160) as a precise 3/4 of the quarter note (beating MM 120). That is not so easy to do as it is to say, but the ability should be available to a well-trained player of twentiethcentury music. Here, the two quarter notes of the second violin in measure 27 will function as locally referential timespans for the player. (4) The MM80-to-60 relation in the second violin, measures 29-30, will retrograde the MM120-to-160 relation of (3) above, one rhythmic octave
71
4.1.2
Generalized Interval Systems (3)
lower. Here "MM80" is projected only by the E|?-triad-event in measure 29 of the score; the tempo is not beat by any recurrent durational unit. Nevertheless a conceptual MM80 is useful to the player in a manner indicated by figure 4.3.
FIGURE 4.3
72
The figure transcribes the rhythm of the second violin from the middle of measure 26 through measure 30 into a new notation, using MM 160 as a new notational tempo of reference, that is, the tempo at which the new notated quarter beats. This transcription brings out clearly how the rhythmic peripatetics of the second violin are structured by the indicated relationship, that is MM80-to-60 answering MM120-to-160. The transcription "modulates" our rhythmic hearing exactly as the second through sixth notes of the second violin on figure 4.2b would sound "modulated" if we listened to them in B[> minor, rather than D|? major. Just as the Fs of figure 4.2b would sound primarily as fourths below the adjacent locally referential Bjjs, in our modulated pitch-hearing, just so the tempi of MM 120 and MM60 on figure 4.3 sound in rhythmic proportions 3 :4 and 4: 3 to the adjacent locally referential tempi of MM 160 and MM80, that lie alongside them. Figure 4.3 demonstrates a logical internal structure for the second-violin passage as a rhythmic entity in itself; this structure will surely not emerge if the player adjusts each individual tempo of figure 4.3 only to the beats of the viola at MM 180 hereabouts, or to the notated beat of the score at MM 120. It is in order to bring out the quasi-palindromic structure of figure 4.3 that the "tempo" of MM80 is represented, exceptionally, by only one time span. (5) The MM60-to-90 relation in the second violin, measures 30-31, will match, a rhythmic octave lower, the earlier MM120-to-180 relation between the cello at the opening of the passage and the viola entrance. This needs no further discussion; the relation of the relations will emerge without special attention if the players are otherwise temporally "in tune." (6) The MM90 of the first violin at measure 33 will match the MM90 of the second violin at measure 31. Obviously. Here MM90 is a referential local time-unit. Likewise the MM90 of the second violin at measure 31 will have matched the MM 180 of the viola so far, using MM 180 as a referential time unit. (7) The MM36-to-90 profile of the first-violin part as a whole over the passage will match in transposed retrograde (or inversion) the MM120-to-48
Generalized Interval Systems (3)
4.1.2
of the cello part as a whole up to measure 33. It is much harder to hear the large rhythmic proportion here than it is to hear the corresponding symbolic pitch proportion on figure 4.2b. Nevertheless, it will aid communication between cello and first violin, as well as projection between ensemble and audience, if the first violinist hears the MM90 entrance at measure 33 speeding up the earlier MM36 of the instrument in exactly the same ratio as the MM48 of the cello at measure 27 slowed down that instrument's earlier MM 120. The proportion can be sensed when the two instruments rehearse the pertinent music by themselves. Via this proportion, the MM90 of the first violin at measure 33 engages and completes a large mensural structure functioning over measures 22-35; it is not simply a surrender of the first violin passively to the beats of the second violin and viola at measure 31 and following. Of course the first violin will use those beats to find its new tempo at measure 33. To sum up: When performers confront the score of the Carter passage and the numerical network of local tempi or time-units displayed in figure 4.2a, they should not concern themselves with the question, "Which one of these is the overall unifying referential tempo?" That question, a rhythmic analog to the sorts of questions asked about pitch structures by Rameau, Riemann, and Hindemith among others, has no definite answer here. Even if we try to force an answer by selecting MM48, or MM 180, or MM60-then-90 as a "root" tempo on the basis of this or that criterion, we shall still not be engaging thereby the temporal relationships that make this music progress and communicate. Those temporal relationships, some of which were discussed in performance notes (l)-(7) above, involve patterns of local tempo "consonances," patterns in which many different tempi can assume locally referential roles. This attitude toward the numerical network of figure 4.2a, and the symbolic pitch network of figure 4.2b, is more in the spirit of Zarlino: It asks not for one overriding referential unity, but rather for a splendid variety of consonant ratios among the entities involved, as they underlay and succeed one another, projecting a logical compositional idea. In this way of hearing the rhythmic space through which the passage moves, any time span has the potential for becoming locally referential, or behaving as if it were. For example, let time span r be the span covered by the first note of the cello in measure 22 of the score; let s be that time span covered by the F# of the first violin in measures 25-26; let t be that time span covered by the A of the first violin in measure 26. We can say if we-wish that t begins 16j r-spans after the beginning of r, and lasts If times the duration of r. But this way of listening corresponds to the "foot-tapping" performance of the first violin's melody. We can also say that t begins 1 s-span after the beginning of s, and lasts 1/2 the duration of s. And that way of listening corresponds to a much more musical shaping of the melody. Taking s' as the time span covered by the opening D of the first violin in measures 22-23, we could also say that t begins 4 s'-spans after the beginning of s', and lasts 1/2 the duration of s'. This
73
4.1.2
Generalized In terval Systems (3)
way of listening corresponds to an even more musical shaping of the melody. Adopting the above attitude to Carter's rhythmic space, we implicitly deny the relevance of GIS 4.1.2 as a model. Given abstract time spans s and t, we want to be able to conceive t as beginning a certain number of s-beats after s, rather than a certain number of possibly irrelevant "referential units" after s. If s is the span (a, x) and t is the span (b,y), the old GIS of 4.1.2 assigned int(s, t) = (b — a,y/x): t begins b — a referential units after s, and lasts y/x times as long. We want to replace that old notion of time-span interval by a new function: int(s, t) = ((b — a)/x, y/x). The new interval tells us that t begins (b — a)/x x-lengths (s-beats) after s, and lasts y/x times as long. The new interval uses s itself as a measuring rod, to tell us how much later t begins.
FIGURE 4.4
74
Figure 4.4 shows how our new "interval" works. On the figure, four numerical time-spans are indicated: Sj = (a^Xj), i1 = (b^y^, s2 = (a 2 ,x 2 ), and t2 = (b2, y 2 ). We shall see later that it does not matter at all, for our new model, what the formal numerical time-point zero is, or what the formal numerical time-unit is. That is, it does not matter to what percept we attach the numerical time-span label (0,1). On the figure, we can imagine an "upper instrument" projecting s x and ^ at a slow tempo, and a "lower instrument" projecting s2 and t2 at a fast tempo. The dotted slurs arching above the upper instrument mark off x1 -lengths, durations that mark a contextual (potential) Sj-beat. The dotted slurs arching below the lower instrument mark off x2lengths, durations that mark a contextual (potential) s2-beat. Using our new interval construct, we write int^,^) = (4,2): t1 begins 4 Sj-beats after s 1? and lasts twice as long. Arithmetically, (b: — a^/Xj = 4 and y!/x x = 2. Using
Generalized Interval Systems (3)
4.1.3.2
the new interval construct, we also write int(s 2 ,t 2 ) = (4,2): t 2 begins 4 s2beats after s2, and lasts twice as long. Arithmetically, (b2 — a2)/x2 = 4 and y 2 /x 2 = 2. Note that our new "interval from s2 to t2" is the same as our new "interval from sl to t^': int(s 2 ,t 2 ) = m^Su^) = (4,2). We shall discuss the implications of this a lot more later on. Note particularly that sx precedes s2 on figure 4.4 in the obvious sense, while t x , the (4,2)-transpose of s^, follows t 2 , the (4,2)-transpose of s 2 . One sees that our intuitions about formal "transposition" will not be completely reliable in our new non-commutative GIS. (Our intuitions about interval-preserving operations will be trustworthy.) We are of course still far from having constructed a formal GIS in which our new notion of "interval" is to work. It is high time to do so now. 4.1.3.1 LEMMA: Let IVLS be the family of pairs (i, p), where i is a real number and p is a positive real number. Then IVLS forms a group under the composition
0,p)(j,q) = (i + pj,pq). In this group, the identity is (0,1) and the inverse of the element (i, p) is the element ( — i/p, 1/p). The group is non-commutative. The proof of the Lemma will be left as an exercise for the interested reader. Do not forget to show that the defined composition is associative: ((i,p)(j,q))(k,r) = (i,p)((j,q)(k,r)). 4.1.3.2 THEOREM: Let int be the function that maps TMSPS x TMSPS into the group IVLS of Lemma 4.1.3.1 according to the formula int((a,x),(b,y)) = ((b-a)/x,y/x). Then (TMSPS, IVLS, int) is a GIS. Proof (optional): We must show that Conditions (A) and (B) of Definition 2.3.1 obtain. (A): Given time spans (a,x), (b,y), and (c, z), we are to show that int((a, x), (b, y))int((b, y), (c, z)) = int((a, x), (c, z)). We write int((a, x), (b, y))int((b, y), (c, z)) = ((b-a)/x,y/x)((c-b)/y,z/y) by the formula defining int in the theorem. This = (((b - a)/x) + (y/x)(c - b)/y, (y/x)(z/y)) by the group composition in IVLS. Canceling factors of y in the numerators and denominators, we see that this = ((b — a + c — b)/x, z/x) which = ((c — a)/x, z/x). And that number pair is indeed int((a, x), (c, z)).
75
4.1.4
Generalized Interval Systems (3)
(B): Given the time span s = (a, x) and the interval (i, p), we are to find a unique time span t = (b, y) which lies the interval (i, p) from the time span s = (a, x). If any such b and y exist, they must satisfy the relation int((a, x), (b, y)) = (i, p), or ((b - a)/x, y/x) = (i, p), or (b — a)/x = i and y/x = p, or b = ix + a and y = xp. So there can be at most one time span t in the desired relation to s and (i, p): That is the time span t = (b, y) = (ix + a, xp). And in fact this particular t is in the desired relation: int(s, t) = int((a, x), (ix + a, xp)); this = (((ix + a) — a)/x, xp/x) by the formula defining int; that = (ix/x, p), which is indeed (i, p) as desired, q.e.d. At long last, we have before us a non-commutative GIS of musical interest. The GIS has important formal properties, which we shall now study. 4.1.4
THEOREM: GIS 4.1.3 has properties (A) and (B) below. (A): For any real number h, the interval from time span (a + h, x) to time span (b + h, y) is the same as the interval from (a, x) to (b, y). (B): For any positive real number u, the interval from time span (au, xu) to time span (bu, yu) is the same as the interval from (a, x) to (b, y). Proof: (A): int((a + M),(b + h,y)) = (((b + h) - (a + h))/x, y/x) (4.1.3.2) = ((b - a)/x, y/x) (algebra) = int((a,x),(b,y)) (4.1.3.2). (B): int((au, xu), (bu, yu)) = ((bu - au)/xu, yu/xu) (4.1.3.2) = ((b - a)/x, y/x) (algebra) = int((a,x),(b,y)) (4.1.3.2). q.e.d.
76
Some commentary on this theorem is in order. The time spans (a, x), (b, y), and so on still rely numerically on an implied referential time-unit and an implied time point zero: (a, x) begins the number a of referential units after the referential zero time-point, and lasts the number x of referential units. The essence of Properties (A) and (B) in the theorem above is that the numerical function int for the GIS under present discussion does not depend at all on the choice of time point zero, or on the choice of referential time-unit. To see this, suppose first that we move the referential zero time-point back h units into the past (= forward ( —h) units into the future). An event originally associated with the time span (a, x) will now be associated with the time span (a + h, x): The event will begin a + h units later than the new zero
Generalized Interval Systems (3)
4.1.5
time-point. Similarly, another event originally associated with the time span (b, y) will now become associated with the time span (b + h, y). Property (A) of the theorem says that in GIS 4.1.3, the formal interval between the time spans associated with the two events is not affected by this transformation. Even though the time spans themselves, as number-pairs, change from (a, x) to (a + h, x) and so on, the interval between transformed spans is the same as the interval between the original spans. Now suppose we change the referential unit of numerical time, so that the old unit is u times the new unit. A duration of x old units is then the same as a duration of xu new units. And the number a of old units after time-point zero is the same as the number au of new units after time-point zero. Hence the events that were associated with time spans (a, x) and (b, y) in the old system will be associated with time spans (au, xu) and (bu, yu) in the new system. Property (B) of the theorem says that in GIS 4.1.3, the formal interval between the time spans associated with the two events is not affected by this transformation. Thus, in the GIS of 4.1.3 the function int(s, t) will always deliver one and the same pair of numbers (i, p), no matter what the referential time-unit and the referential zero time-point by which we calculate numerical durations and distances from time-point zero. To put this intuitively: Given event 1 and event 2 in a piece, we can play the music whenever we want and at any tempo we want, without affecting at all the pair of numbers (i, p) which GIS 4.1.3 will deliver to us as the formal interval between the numerical time spans associated with the two events for any particular analysis. The same can not be said for the commutative GIS of 4.1.2, studied earlier. In that GIS the interval between time spans (a, x) and (b, y) was (b — a, y/x); accordingly, if we replace the referential time-unit so that events once associated with those time spans now become associated with the new spans (au, xu) and (bu, yu), then the interval between the new spans is different. It is not (b — a, y/x), but rather (bu — au, y/x). We noted this earlier. In our present terminology, we can say that GIS 4.1.2 does not enjoy Property (B) of Theorem 4.1.4. In fact, a remarkable theorem is true. Not only does GIS 4.1.3 enjoy the two Properties of Theorem 4.1.4, but it is also essentially the only possible GIS involving time spans as objects that enjoys those two Properties. The meaning of the word "essentially" in the above sentence is made clear by Theorem 4.1.5 following. 4.1.5 THEOREM: Let GIS' = (TMSPS, IVLS', int') be any GIS with time spans for its objects that also enjoys Properties (A) and (B) of Theorem 4.1.4. Then the group IVLS of GIS 4.1.3 and the group IVLS' of the given GIS' are isomorphic via a map f such that, for all time spans s and t, int'(s,t) = f(int(s,t)).
77
4.1.6.1
Generalized Interval Systems (3)
Some commentary is in order before we launch into a proof. The idea of isomorphism between (semi)groups was discussed in 1.11.1 and 1.11.2 earlier. To review here: If G and G' are abstract groups, a function f from G into G' is "an isomorphism of G with G'" if f is 1-to-1, onto, and a homomorphism. f is a homomorphism if f (mn) = f (m)f (n) for every m and every n in G. Supposing f an isomorphism of the abstract groups G and G', then the two abstract groups will have exactly the same algebraic structure under the identification of m in G with its image f(m) in G'. So the first thing Theorem 4.1.5 says is that IVLS and IVLS' have essentially the same algebraic structure, when we identify the member m of IVLS with its image f (m) in IVLS'. Second, Theorem 4.1.5 says that if we take the member m of IVLS to be int(s, t) in particular, then the function f whose existence is asserted makes the image f (m), a member of IVLS', equal precisely to int'(s, t). Thus the function int' is, so to speak, naught but the isomorphic image of the function int under the isomorphism f whose existence the theorem asserts. In this sense, the given GIS' is "essentially" the same as GIS 4.1.3. The (optional) proof of Theorem 4.1.5 is lengthy. To help break it into manageable sections, we shall prove two lemmas. The lemmas appear below as 4.1.6.1 and 4.1.6.2. After that, we shall go on to the proof of the Theorem proper. 4.1.6.1 LEMMA (optional): Let G and G' be abstract groups. Let f be a function from G into G' such that for all m and all n in G, ^m)"1^) = f^n^n). Then f is a homomorphism. Proof of (optional) Lemma: Set m = n = e in the given formula; we get f (e)"1^) = f(e). It follows that f(e)"1 is the identity in G'; hence f(e) is the identity in G', e'. Now set n = e and let m vary in the formula of the Lemma. We get f(m)"1f(e) = fCnT1). Since f(e) = e', we have f(m)-1 = f(m-1) for all m. Then we can rewrite the formula of the Lemma as f(m~ 1 )f(n) = ftm^n)
for all m and all n.
As m runs through the various members of G, m"1 = o runs through the various members of G. Substitute o for m"1 in the rewritten formula; we then obtain the formula f (o)f (n) = f (on) for all o and all n in G.
And thus f is a homomorphism, as claimed. 4.1.6.2 LEMMA (optional): Within the group IVLS of 4.1.3.1,
(i,pr1(j,q) = ((j-i)/P,q/p)78
Proof of (optional) Lemma: We already verified in 4.1.3.1 that (i,p)-1 in
Generalized Interval Systems (3)
4.1.6.2
this group was the element (- i/p, 1 /p). Then (i, p)1 (j, q) = (- i/p, 1 /p) (j, q) = ((-i/p) + (l/p)j,(l/p)q) = ((j - 0/P,q/P) as asserted. Now we are ready for the (optional) Proof of Theorem 4.1.5. We take the time span (0,1) as a referential object within the space of GIS' for purposes of LABELing. That is, we set ref = (0,1). Then the function f for which we are looking, the isomorphism of IVLS with IVLS', is defined by formula (i) below. (i) f(i,p) = LABEL'(i,p) = int'((0, l),(i,p)). On the left of formula (i) the number-pair (i, p) is considered as an interval, a member of IVLS, while in the middle and on the right of the formula, the same number-pair is considered as a time span, a span being LABELed in GIS' by its GIS'-interval from the referential object ref = (0,1). The number-pair (i, p), as a pair of numbers, can be interpreted either way. Now we can write f (i, p)"1 f (j, q) = LABEL'(i, p)'1 LABEL'(j, q), by formula (i). This = int'((i,p),(j,q)) by 3.1.2. This = int'((0, p), (j — i, q)), since GIS' enjoys Property (A) of Theorem 4.1.4 by supposition. And this = int'((0,1), ((j — i)/p, q/p)) since GIS' enjoys Property (B) of Theorem 4.1.4 by supposition. And that = f ((j — i)/p, q/p) by formula (i) above. And that = f((i,p)~ 1 (j,q)) by Lemma 4.1.6.2. Putting together the whole string of equalities we have just noted, substituting m for (i, p) and n for (j, q), we see that we have proved f(m)-1f(n) = f(m-1n) for every m and every n in IVLS. By Lemma 4.1.6.1, we conclude that f is a homomorphism. Since the LABEL' function is 1-to-l from TMSPS onto IVLS' (3.1.2), the function f is 1-to-l from IVLS onto IVLS'. Thus f is an isomorphism of IVLS with IVLS'. It remains to prove that f(int(s,t)) = int'(s,t). Set s = (a, x) and t = (b, y). Then int(s, t) = ((b - a)/x, y/x) and f(int(s, t)) = = = =
int'((0,1), ((b - a)/x, y/x)) (formula (i)) hit' ((0, x), (b - a, y)) (since GIS' enjoys Property (B)) int'((a, x), (b, y)) (since GIS' enjoys Property (A)) int'(s, t). q.e.d.
To recapitulate: Theorem 4.1.5 shows that GIS 4.1.3 is essentially the only possible GIS involving the family TMSPS whose function int is completely independent of the referential time-unit and referential zero time-
79
4.1.7
Generalized In terval Systems (3)
point. To put it more intuitively, GIS 4.1.3 is the .only such GIS, essentially, that will return one and the same element of IVLS as the interval between the numerical time spans associated with two musical events in a piece, regardless of when you play the piece and what tempo you take. GIS 4.1.3 thereby has a privileged theoretical status, as well as a special plausibility for modeling events in the Carter passage and other pertinent music. Since GIS 4.1.3 is non-commutative, it will provide a useful example for illustrating and reviewing the work of sections 3.4 and 3.5 earlier, work that formulated the abstract theory of transpositions, interval-preserving operations, and inversions. 4.1.7 NOTES: Within GIS 4.1.3, the following formulas and facts are true: (A): Given an interval (i, p) and a time span (a, x), the transposition of the given time span by the given interval is T(iip)(a,x) = (a + ix,px). (B): If we fix (0,1) as ref, a referential time span, then the number-pair (a, x), as a member of IVLS, is the LABEL for the time span (a, x): LABEL(a,x) = int((0, l),(a,x)) = (a,x). (C): The (i, p)-transpose of the time span (a, x) is the number-pair given by the composition in IVLS of the two intervals (a, x) and (i, p). T(i(p)(a, x) = (a,x)(i,p). (D): Using the number-pair (a, x) in the same way, as both a time span and an interval, we can show that the interval-preserving operation P(h)U) transforms the time span (a, x) into the time span p
(E): The only central member of IVLS is the identity interval (0,1). (F): No transposition preserves intervals, and no interval-preserving operation is a transposition, the identity operation T(0>1) = P (O ,D excepted. (G): The operation of (c, z)/(d, w) inversion, applied to the time span (a, x), yields the time span I!c;?(a,x) = (d + (c - a)w/x,zw/x) = (d,w)(a,x)~ 1 (c,z).
80
(H): Given time spans s, t, s', and t', then !£'. = I, as an operation on TMSPS if and only if s' = s and t' = t. (I): There are no interval-reversing operations on TMSPS. Proofs and commentary: (A): Via 3.4.1, the transposition of (a, x) by (i, p) is that time span (b, y) which lies the interval (i, p) from the time span (a, x), i.e. which satisfies the equation int((a, x),(b,y)) = (i,p). Thus (b, y) satisfies the equation ((b — a)/x, y/x) = (i, p); whence (b — a)/x = i and y/x = p. So b = a + ix and y = px. The transposed time span (b, y) = (a + ix, px) can be
Generalized Interval Systems (3)
4.L7
described as follows: b lies i x-spans later than a; y lasts p times as long as x. If we turn back to figure 4.4 (p. 74), we will see that the time span tj of the figure is the (4,2)-transpose of s x : ilbegins at bj, 4 xt-spans aftera t ; t tlasts a duration of yt , 2 times the duration Xj of s^^. Likewise, t2 on the figure is the (4,2)-transpose of s2. We noted while studying the figure earlier that s x precedes s2, while tl follows t 2 . We may say that transposition operations, in this GIS, do not only fail to preserve intervals, they even fail to preserve chronology. (B) of the Notes is a straightforward computation: LABEL(a,x) = int((0, l),(a,x) = ((a - 0)/1, Ix) = (a,x). (C) of the Notes applies (B) to the formula of 3.4.3, and (D) applies (B) to the formula of 3.4.4. The interval-preserving operation P(h u) first blows up or shrinks the sample time span (a, x) by a factor of u, transforming (a, x) to (ua, ux), and then moves the latter time span backward or forward in time by h or (—h) numerical units, transforming (ua, ux) to (h + ua, ux) = P(a, x). Remember that these interval-preserving operations are not formal "transpositions" in our non-commutative system! (E) of the Notes is proved as follows. Suppose the interval (i, p) is central in IVLS, that is (i,p)(j,q) = (j,q)(i,p) for all (j,q). Expanding the binary composition on each side of that equation, we infer (i + pj, pq) = (j + qi, qp) for all j and all positive q. Then i + pj = j + qi for all such j and q, whence (p — l)j = (q — l)i for all such j and q. Take j = 1 and q = 1 as one such j and q; then (p — 1)1 = (1 — l)i or p — 1 = 0; we infer that p must be equal to 1. Now we can go back to our general equation, (p — l)j = (q — l)i; substituting p = 1, we infer that (q — l)i = 0 for all positive q. But then i is obviously zero. So p = 1 and i = 0; our given central interval (i, p) must be the identity interval (0,1). (F) of the Notes then follows from Theorem 3.4.8. (G) of the Notes can be computed from 3.5.2 together with (B) of the Notes. Or it can be computed directly from the defining formula of 3.5.1, using the known group structure of IVLS here. (H) follows from 3.5.3, where we proved that l£ = lls if and only if t' = Ig(s') and the interval int(s', s) is central. Via (E) above, this will happen if and only if t' = Ig(s') and s' = s. Since Is(s) = t, this will happen if and only if s' = s and t' = t. (I) of the Notes simply restates 3.6.4 in the present context. We may use figure 4.4 yet once again to picture the effect of an inversion. On that figure, we noted that int(s 2 ,t 2 ) = int^,^). Hence, via Definition 3.5.1, t2 is the tlls2 inversion of s^ that is, Ij^Sj) = t 2 . This concludes our study of a non-commutative GIS which is also a rhythmic GIS of musical interest. We shall now study some timbral GIS structures.
81
4.2.1
82
Generalized Interval Systems (3)
4.2.1 EXAMPLE: Given positive numbers s(l), s(3), and s(5), let the numbertriple s = (s(l), s(3), s(5)) denote the class of all harmonic steady-state sounds (i.e. periodic wave-forms) whose first, third, and fifth partials have respective power s(l), s(3), and s(5). Let S be the family of all such number-triples s, as s(l), s(3), and s(5) range over all positive values. Given positive numbers i(l), i(3), and i(5), let us imagine at hand one or more "devices" (e.g. computer procedures) which have this property: Whenever a harmonic sound is led as input into such a device, the device outputs a harmonic sound whose first, third, and fifth partials have respectively i(l) times, i(3) times, and i(5) times the power of the corresponding input partials. Given i(l), i(3), and i(5), let the number-triple i = (i(l), i(3), i(5)) denote the class of devices that transform harmonic sounds according to these proportions for the first, third, and fifth partials. Let IVLS be the family of all such number-triples i, as i(l), i(3), and i(5) range over all positive values. IVLS is a group under the combination ij = (i(l)j(l),i(3)j(3),i(5)j(5)). Given harmonic class s = (s(l), s(3), s(5)) and harmonic class t = (t(l), t(3), t(5)), take int(s, t) to be that member i of IVLS for which i(l) = t(l)/s(l), i(3) = t(3)/s(3), and i(5) = t(5)/s(5). Then (S, IVLS, int) is a GIS. That is, Conditions (A) and (B) of Definition 2.3.1 obtain. The GIS is commutative. When int(s, t) = i, any sound in class t will have i(l), i(3), and i(5) times the power of any sound in class s, at its first, third, and fifth partials respectively. Another way of regarding the statement "int(s, t) = i" is to think: Any sound of class s, when led as input to any device of class i, will cause a sound of class t to be output. The fundamental frequencies of the sounds are irrelevant here; we are concerned only with certain aspects of their timbral profiles. If a given sound is led through a device of class i, and if the resulting output is then led through a device of class j, the final output will be a sound of the same class as that which would have resulted, had the original sound been led through a device of class ij. Or, more simply, a device of class i concatenated with a device of class j forms a device of class ij. We can make many variations on the specific GIS just discussed. For example, instead of considering partials #1, #3, and #5, we could instead consider partials #1, #2, and #4. Or we could consider partials #1through- # 5, or # 1-through- # 8, or # 1-through- # 8-except-for- # 7, and so on. We can use GIS structures of this sort to build more complex GIS structures of interest. For instance, let GISj be the GIS of the sort just discussed which considers partials # 1-through-#8 of harmonic sounds. We shall call an element s = (s(l),..., s(8)) of GISj a "pertinent spectrum." Now let us take as GIS2 a familiar GIS involving the space S2 of "time points." We imagine a referential zero time-point and a referential time-unit fixed, so that we can label the elements of S2 by real numbers a. IVLS2 is the additive group
Generalized Interval Systems (3)
4.2.1
of real numbers and, given time points a and b, int^a, b) is the number b — a of time units by which b is later than a. (b — a later = a — b earlier.) Let us explore the direct product GIS3 = GISj (x) GIS2. The elements of S3 = Sj X S2 are pairs (s, a), where s = (s(l), ... , s(8)) is a pertinent spectrum and a is a time point. The pair (s, a) models a class of sounds having pertinent spectral profile s at time a. A finite set of such pairs, say the set DVSP = ((Sj, aj), (s2, a-j), ... , (SN, a^), models a class of sounds that have spectrum Sj at time at, spectrum s2 at time a^ ... , and spectrum SN at time a,^. We consider DVSP to be an unordered set of S3-elements, since the chronological order of the time points an imposes a natural ordering on the member pairs of DVSP, no matter in what order we list those pairs. For convenience, we shall assume the members of DVSP to be listed above in chronological order, that is with aj < 82 < ••• < aN. Supposing the time points an to be reasonably close, then DVSP will model a class of sounds with a certain "developing spectrum." Each sound of this class has pertinent spectrum sn at time an.
FIGURE 4.5 Figure 4.5 displays DVSP, with N = 5 in this case, as an array of numbers. If we imagine the plane of the page as a base, and erect at each entry sm(n) a spike of heights sm(n) jutting up from that page, we shall obtain a sort of sketch for a relief map that shows how the spectrum of the sound develops over time. Supposing the time points aj through a5 to be dense enough so as to catch enough salient features of the sound-class involved (e.g. times when some partial has a pronounced local maximum or local minimum value), then we can consider this sketch to be a good approximation for a continuous relief map that characterizes the class of sounds with respect to its developing spectral "signature." This sort of relief-map representation is in common use today as a means for studying various classes of harmonic sounds, including
83
4.2.2
Generalized Interval Systems (3)
familiar instrumental sounds in particular.6 As we have seen, any such relief map can be regarded as approximately a finite (unordered) subset DVSP of S3. The way that DVSP = ((Sj, a x ), (s2, a 2 ),..., (SN, aN)) develops through its own intrinsic chronology can be studied in exactly the same way we earlier studied the unfolding interval vector for a chronologically developing set in another direct-product GIS. That was in section 3.3.1, where we applied our study to the analysis of a passage from Webern's Piano Variations. 4.2.2 EXAMPLE: Fix a lower frequency LO and a higher frequency HI; we shall represent a varying frequency between LO and HI by the variable x. By a "rational spectrum" we shall mean a function s of the variable x, taking on real values, which satisfies Conditions (A) and (B) below. Condition (A): The function s can be written as the quotient of polynomial functions. That is, there exist polynomial functions p and q in x such that s(x) = p(x)/q(x) for every x between LO and HI. Condition (B): s(x) is strictly positive for every x between LO and HI. We shall take as the family S for a GIS the family of all rational spectra s. The rational spectra form a group under multiplication. For if s(x) = Pi(x)Ah(x) and t(x) = p2(x)/q2(x), then p3(x) = p1(x)p2(x) and q3(x) = q1(x)q2(x) are polynomial functions. Hence (st)(x) = s(x)t(x) can be written as a quotient of polynomial functions: (st)(x) = p3(x)/q3(x). Furthermore, (st)(x) is strictly positive since both its factors, s(x) and t(x), are strictly positive. Thus the product of two rational spectra is itself a rational spectrum. The function 1 (x) = 1 is a rational spectrum; it is a multiplicative identity fo the family of rational spectra. If s is a rational spectrum, so is 1/s, where (l/s)(x) = l/s(x); the spectrum 1/s is an inverse for s within the multiplicative system of rational spectra. We shall take as the group IVLS for our GIS the family of rational spectra again, now considered as a multiplicative group. Given rational spectra s and t, considered as members of S, we shall take as int(s, t) for our GIS the rational spectrum t/s, considered as a member of IVLS. It is straightforward to verify that (S, IVLS, int) is a GIS. The GIS models a system of "linear filter classes." With each rational spectrum s we can associate a class of filters. Any filter in this class can be built up from two simple kinds of filters, "all-zero" and "all-pole" filters. Any filte in class s will transform an input sound to an output sound in such a way that the power of frequency x in the output is equal to s(x) times the power of x in the input. The manipulation of sounds and filters in this way is characteristic
84
6. Good examples of the practice can be found in "Lexicon of Analyzed Tones," a series of analysis and plotting programs by James A. Moorer and John Grey published in Computer Music Journal. "Part I: A Violin Tone" appeared in vol. 1, no. 2 (April 1977), 39-45. "Part II: Clarinet and Oboe Tones" appeared in vol. 1, no. 3 (June 1977), 12-29. "Part III: The Trumpet" appeared in vol. 2, no. 2 (September 1978), 23-31. There is also a handsome "relief map" on the cover of that issue.
Generalized Interval Systems (3)
4,3
of certain recent work in computer music.7 We can sensibly talk of "transposing" and "inverting" such filter-classes in our GIS; since the GIS is commutative, these operations will behave in an intuitively familiar way, following the laws developed in sections 3.4 and 3.5 earlier. We can vary our GIS by varying the region within the frequency x varies. We can change the values of LO and HI; we can even consider disconnected regions within which x is to vary. 4.3 METHODOLOGY: In both GIS 4.2.1 and GIS 4.2.2, the formal relations involved match our sonic intuitions only to a certain extent. In either GIS, that is, we may have int(sp tj) = int(s2, tj), while the intuitive proportion between Sj and tj does not much "sound like" the intuitive proportion between s2 and ^ The models suffer here by comparison with the constructs of Wayne Slawson, who has developed an elegant model for an "intuitive" timbral space.8 Yet such considerations should not necessarily lead us to ignore GIS 4.2.1 and GIS 4.2.2. To relate "natural" mathematical structure with intuition is a problem in connection with virtually all theories involving sensory stimuli. For instance, it is mathematically natural to compare the amplitude of two sin waves by saying that one wave has i times the amplitude of the other; this is especially natural if both waves are at the same frequency. Yet if s, and tj = i • Sj are sin waves of the same low frequency, while s2 and t2 = i • s2 are sin waves of the same middle-range frequency, our intuition about the relative loudness of Sj and t, may differ considerably from our intuition about the relative loudness of s2 and t2. Still, nobody would propose that we should feel free to ignore quotients of amplitudes in a study of musical sounds, just because they do not always conform to our intuitions of loudness, give or take some simple transformation. This is the methodological point: It is unfair to demand of a musical theory that it always address our sonic intuitions faithfully in all potentially musical contexts under all circumstances. It is enough to ask that the theory do so in a sufficient number of contexts and circumstances. Perhaps, too, it is fair to ask that the theory be potentially able to address our intuitions in any given musical situation, provided that the situation develops in a suitable musical manner. To support the methodological point, let us explore certain thematic features from the first movement of Chopin's Bl»-Minor Sonata. On figure 4.6, (a) symbolizes aspects of the motive from the opening 7. The techniques are explained lucidly by Richard Cann in "An Analysis/Synthesis Tutorial," Computer Music Journal. Part 1 is in vol. 3, no. 3 (September 1979), 6-11. Part 2 is in vol. 3, no. 4 (December 1979), 9-13. Part 3 is in vol. 4, no. 1 (Spring 1980), 36-42. 8. "The Color of Sound: A Theoretical Study in Musical Timbre," Music Theory Spectrum vol. 3 (1981), 132-41.
85
4.3
Generalized Interval Systems (3)
FIGURE 4.6
86
Grave measures, written in augmented rhythmic notation to fit the subsequent tempo of the Doppio Movimento. (b) symbolizes the motive of the first theme, (c) symbolizes a motive from the end of the bridge, and (d) symbolizes the motive of the second theme. At the end of the exposition there is a big push to cadence, leading to a big dominant of D[? major. Then there is a repeat sign. Chopin's notation is ambiguous; for this discussion I will assume what I hear strongly in any case, that the repeat goes back to (a), rather than (b). Then th opening note of (a) completes the Dt? cadence; one thereby hears F|? as the second note of (a) all the more strongly, since it is a third of the tonicized Db, despite the notated E natural and the subsequent leading of the note as E natural in the bass line. Here is the assertion I wish to study: The first melodic dyad of (b), marked y on the figure, belongs to the same interval class as x, the first melodic dyad of (a). This relation, like the relation of our four sin tones earlier, is formally "true" but intuitively problematic. At least, the relation of x and y dyads is hard to hear when we first hear the first theme, the first time through the exposition. But, I claim, the asserted relation has the potential for becoming audible, and in fact it does become audible, even highly significant, the second time through the exposition. To hear this one should take motive (b), rather than motive (a), as a poin of departure. By the end of the bridge section, motive (b) has been transformed into motive (c). Rhythmically, (c) augments the durations of (b) by factor of 2, and then augments its own last two notes by yet another factor of 2. Motive (d) introduces the second theme immediately thereafter. Rhythmically, (d) augments (c) by yet another factor of 2, and exchanges the durations of the first two notes (counting the rest as part of the note that precedes it). And then, going around the repeat, motive (a) augments (d) rhythmically by still another factor of 2. Thus the chain of motive-forms (b)-(c)-(d)-(a bis) is generated by a very consistent, indeed relentless, process of rhythmic expansion. After the repeat, when we continue on from (a bis) to (b bis), we a leaping from the end of the chain (b)-(c)-(d)-(a), back to its beginning and
Generalized Interval Systems (3)
4.3
motivic generator. In this larger and later context, we recognize that (b) and (a), the boundary forms of the chain, are rhythmically transformed variants, each of the other. And so we are much more willing to perceive other sorts of relationships linking (b) with (a). In particular it is now much easier, I would say proper and important, to hear dyad y as an ironically scurrying transformation of dyad x, with its portentous weight. We are helped in hearing this relationship by the dyad marked z on figure 4.6, which we have by now heard again and again during the second group. We are also helped by the big D|? cadence prepared at the end of the exposition, which helps us hear F|? at the repeat of (a). The first time around we may have had a certain predilection for E natural because of our associations with the opening of Beethoven's Sonata op. I l l , even specifically with measures 4| to 5^ of that piece. But the second time around, when we clearly hear F(? (as well), it is much easier for us to associate the x dyad, as root-and-minor-third of Dj?, with the y dyad, minorthird-and-root of B(?, particularly since the two dyads both begin on a D(?. To repeat my methodological claim: One should not' ask of a theory, that every formally true statement it can make about musical events be a perception-statement. One can only demand that a preponderance of its true statements be potentially meaningful in sufficiently developed and extended perceptual contexts.
87
5
Generalized Set Theory (1):
Interval Functions; Canonical Groups and Canonical Equivalence; Embedding Functions
In this chapter we shall generalize certain aspects of atonal set theory so as to apply in the context of any GIS.1 5.1.1 DEFINITION: Given a GIS(S, IVLS,int), we shall mean by a set in the present chapter a finite unordered subfamily of S. 5.1.2 DEFINITION: If f is any mapping of S into itself and X is any set, we denote by "f (X)" the set of elements f (s) formed as s varies over X. That is, if X = (Sj, s 2 ,..., SN), then f(X) is the set whose members are f(Si), f(s 2 ), ..., and f (SN). If f is not 1-to-l then some of these f-values may not be distinct; then f (X) will have a smaller cardinality than X. If f is 1-to-l then the N f-values listed above will be distinct, and f (X) will have the same cardinality as X. 5.1.3 DEFINITION: Given a GIS, given sets X and Y, then the XjY interval function is a function IFUNC(X,Y) which maps the group IVLS into the family of non-negative integers as follows: For each interval i in IVLS, the value of the function, IFUNC(X, Y) (i), counts the number of distinct pairs (s, t) in S x S such that s is in X, t is in Y, and int(s, t) = i. That is, IFUNC(X, Y) (i) tells us in how many different ways the interval i can be spanned between (members of) X and (members of) Y. Usually, the context will make it clear when we are talking about the
88
1. The agenda, in chapters 5 and 6, parallels and expands upon the presentation of atonal set theory I developed in my article, "Forte's Interval Vector, My Interval Function, and Regener's Common-Note Function," Journal of Music 77ieor>>vol.21,no.2(Fall 1977), 194-237.
Generalized Set Theory (1)
5.13
function int, which maps S x S onto IVLS, and "the interval function" which, given sets X and Y, maps IVLS into the non-negative integers. IFUNC does not figure heavily in the standard literature of atonal set theory. Let us study some examples to see how it applies to that theory; the reader may thereby see the point of the construction, both in that specific application and more generally.
FIGURE 5.1 Figure 5.1 (a) displays the two pitch-class sets Xj = (E, B|?) and Y t = (F, A, C#) as a sort of symbolic melodic antecedent and consequent. Arrows drawn from each note of X t to each note of Y t show which intervals can be spanned, how many ways, between notes of X^ and notes of \l.Here, the even-numbered intervals cannot be spanned at all, and each odd-numbered interval can be spanned in exactly one way. Hence IFUNC(X l5 YJCi) = 0 if i is even, and = 1 if i is odd. Figure 5.1(b) displays the two sets Xj (as before) and Y2 = (G, A, B) in a similar format. We see that IFUNC(X1, Y 2 ) (i) also = 0 if i is even, and = 1 i iisodd.SoIFUNC(X 1 ,Y 2 ) = IFUNC^Y^ as a function on IVLS, even though Y2 is not the same set as Yt—indeed, Y2 is not even a form of Y t . 2 Figure 5.1(c) displays the new sets X 2 and Y3 in the same format. Here X2 is different from X x and Y3 is different from either Y! or Y 2 ; yet IFUNC(X2, Y3) is again the same function of i: Its value is 0 if i is even and 1 if i is odd. Figure 5.1 (d) displays yet another pair of sets, X3 = (E[?, F, G, A, B, C#) and Y4 = (E). The X3/Y4 interval function is still and again the same: IFUNC(X3, Y4)(i) is 0 if i is even, 1 if i is odd. The set X3 here is of different 2. I investigated this sort of phenomenon in an early article, "Intervallic Relations between Two Collections of Notes," Journal of Music Theory, vol. 3, no. 2 (November 1959), 298-301. Its style, unfortunately, makes few concessions to a non-mathematical reader.
89
5.1.3
90
Generalized Set Theory (1)
cardinality from Xj and X 2 ; Y4 is likewise of different cardinality from Y l 5 Y 2 ,andY 3 . Figure 5.1 (d) is displayed in a contrapuntal rather than a melodic format. In general, one could also distinguish a set X from a set Y in other formats: by instrument, by mode of attack (staccato/legato), or by register (as opposed to "voice"), to give only a few examples. The melodic antecedent/consequent format, which seems particularly suggestive, was proposed by Michael Bushnell during his theoretical studies at Stony Brook in the 1970s. Bushnell also initiated and carried through the basic work on the specific analysis following, involving a passage from Webern's op. 7, no. 3, the third of the Four Pieces for Violin and Piano. Figure 5.2(a) reproduces the score through the opening of measure 9. The right hand of the piano over measures 3-8 comprises two melodic phrases, one filling measures 3-4, the other beginning on the B of measure 5 and extending through the F# of measures 7-8. This is all the lyric melody there is in the piece. Figure 5.2(b) displays as X and Y the pitch-class sets that underlie the two melodic phrases. The pitch noteheads representing the pitch classes E, C#, and Eb within Y have been brought down an octave from the music. This is partly for convenience, but partly too because of an idea which will emerge later. Figure 5.2(b) also displays the sets Z0 and Z3 projected by the violin ostinato that accompanies Y. The repeat sign on the figure indicates that we pass from Z3 to Z0, as well as from Z0 to Z3, during the course of this music. Figure 5.2(c) displays some interrelations of X, Y, and the Z-forms, interrelations that all involve the pitch-class interval 3. Each arrow on the figure indicates a T3 relation of one kind or another. The bottommost arrow depicts the T3 relation between Z0 as a whole and Z3 as a whole, a T3-relation of pitches as well as pitch classes. The arrows directly beneath the lower staff of the figure show T3 pitch-relations between the "fourths" of Z0 and those of Z3, and also T3 pitch-class relations between the "fourths" of Z3 and those of Z0, when Z0 is restated directly after Z3. Among all these fourths, Eb-Ab within Z0 and its T3-transform F#-B within Z3 are of special significance. A the crossed lines between the staves of figure 5.2(c) indicate, the Eb-Ab that ends ordered Z0 summarizes in retrograde the Ab-Eb that bounds the total span of ordered melodic phrase X; analogously, the F#-B that ends ordered Z3 summarizes in retrograde the B-F# that bounds the total span of ordered melodic phrase Y. This phenomenon suggests that we explore some sort of T3 relationship between ordered X and ordered Y. On the top staff of figure 5.2(c), the Ab-Eb boundaries of X and the analogous B-F# boundaries of Y are marked by beamed open noteheads. The medial Bb of ordered X is attached to the Xbeam with a stem from a solid notehead; a corresponding C# = T3(Bb) within ordered Y is notated analogously. To hear a function for C#-within-Y analo-
Generalized Set Theory (1)
5.1.3
FIGURE 5.2a
91
5.1.3
Generalized Set Theory (1)
FIGURE 5.2b
FIGURE 5.2c
92
gous to the function of B(?-within-X, the reader may listen to the following features of the passage. First, the C# and the F# within Y both receive agogic accents, marked "a.a." on figure 5.2(c). One may query just what this means, in the piano register of figure 5.2(a) at the given tempo. It surely means something, if only something conceptual; the pianist should be thinking like a singing instrument here. Second, the crescendo that begins at the B[? within X, a crescendo reproduced on figure 5.2(c), is analogous in some degree to the crescendo that begins at the C# within Y, even though the latter crescendo does not get all the way to the final note of its phrase. Third, the beamed B, C#, and F# of Y, within figure 5.2(c), occur as every-third-note of ordered Y; there is a serial regularity about their occurrence. Fourth, once the E, C#, and E[> of Y-within-the-music have been brought down an octave to provide the noteheads for Y-within-figure 5.2(c), it is easy to hear the latter structure as a compound gesture, counterpointing the rising beamed B-C#-F# (= T3 (ordered X)) against the falling chromatic counter-gesture-(F-E)-(E[?-D)-. That "falling chromatic line" on figure 5.2(c) fills in the chromatic space between C# and F#, the medial and final beamed notes of the rising gesture.
Generalized Set Theory (1)
5.1.3
The uppermost arrow on figure 5.2(c), then, indicates a structural T3 relation between set X and set T3(X)-embedded-in-Y. It seems secure to assert this relation between the sets, for it seems reasonable to assert much stronger T3 relations, e.g. the structural embedding of T3(ordered X) as every third note of ordered Y, or even the idea that phrase Y as a whole is inter alia a diminuted (ornamented/troped) version of T3 (phrase X). Now we shall inspect some IFUNC values, to see how they interact with these analytic ideas. Figure 5.3(a) tabulates four interval-functions, IFUNC(Z0,Z3), IFUNC(X, Y), IFUNC(X,Z0), and IFUNC(Z3, Y).
FIGURE 5.3
IFUNC (Z0, Z3) tells us that 4 intervals of 3 are spanned between Z0 and Z3; hence Z3 = T3(Z0). Likewise Z3 = T9(Z0) as a pitch-class set, since IFUNC(Z0,Z3)(9) = 4. This T9 relation is concealed, not revealed, by the registration of the pitches involved in the music. Nevertheless the T9 relation has a certain rhythmic effect, as portrayed in figure 5.3(b). The pair "(9,7>)" on that figure is a direct-product interval; it means "a pitch-class interval of 9 is spanned at a distance of 7 sixteenth-notes between attacks."
93
5.1.3
Generalized Set Theory (1)
The less prominent values of 2 taken on by IFUNC(Z0, Z3) (less prominent than 4) also have rhythmic implications. Figure 5.3(c) shows how IFUNC(Z0,Z3)(2) = 2 and IFUNC(Z0,Z3)(10) = 2 articulate the rhythm of the violin obbligato. (The sixteenth-note symbols are now omitted from the direct-product intervals.) Figure 5.3(d) shows how IFUNC(Z0,Z3)(4) = 2 and IFUNC(Z0,Z3)(8) = 2 articulate the same obbligato in a different rhythmic way. IFUNC helps us to explore these intervallic/rhythmic substructures more carefully than we otherwise might. (We have plenty of time to do so at the written tempo.) The rhythmic effect of IFUNC(Z0, Z3) (3) = 4 is of course to support the quintuple periodicity of the ostinato, as in figure 5.3(e).
94
Now let us return to the IFUNC table of figure 5.3(a) and inspect IFUNC(X,Y). Since X has cardinality 3 and IFUNC(X, Y)(3) = 3, this interval function tells us that T3(X) can be embedded within Y. That is, the function informs us that such an embedding is "true," and would lead us to inspect its potential musical significance in the passage at hand if we had not already done so. The value of 3 is a maximal possible value for IFUNC(X, Y), just as 4 was a maximal possible value for IFUNC(Z 0 ,Z 3 ). Both functions take on their maximal values on the argument i = 3. This sets up a "true" proportion among the four sets involved: X is to subsequent Y just as Z0 is to subsequent Z3, so far as a certain property is concerned (having a maximum IFUNC value at the argument i = 3). Our discussion of figure 5.2(c) has shown that this theoretical truth in fact reflects a musically significant relationship. IFUNC(Z0, Z3) also took on its maximum value at the argument i = 9. But IFUNC(X, Y) does not. Instead, IFUNC(X, Y) has a maximum at i = 8. This tells us that T8(X) as well as T3(X) can be embedded within Y. Is the fact musically significant as well as true? To explore the matter, let us first find the notes of T8(X) as they occur within Y. X = (Ab,B|7,E|7), so T8(X) = (E, Ftf, B). Within ordered-Y, the members of T8(X) appear in the rotated order B-E-F#. Inspecting the score again, one asks if these three notes have any special functions that affect the shaping of phrase Y in the music. I believe they do. Namely, they are the registral and temporal boundary tones for phrase Y. That is, B is at once the first note and the lowest note of the melodic phrase; E is its highest note; F# is its last note. So one can plausibly assert an overall shape for phrase Y that uses T8(X) as a bounding frame, along the lines of figure 5.4. We have been thinking of the set (B, E, F#) as a transposed form of set X, because that transpositional relation is what IFUNC has brought to our attention. As a series, the succession B-E-F# is a rotation of E-F#-B, which is T8 (ordered X). B-E-F# can also be generated as the retrograde series of ordered-X inverted about C#. IFUNC cannot suggest this relation to us; in
Generalized Set Theory (1)
5.1.3
FIGURE 5.4
chapter 6 we shall generalize the interval function to an "injection function" which can. In any case, our noticing that IFUNC(X, Y) (8) = 3 has suggested a search that has led us to the musical relationship of figure 5.4, a relationship that deserves serious aural attention. The relationship engages the register of the high E in the music for phrase Y; we would not hear any boundary function for E if it were an octave lower as in figure 5.2(c).3 Let us return again to the table of figure 5.3(a). We can notice there an interesting resemblance between IFUNC(X,Z0) and IFUNC(Z3,Y). Both functions take on their maximum values at the arguments i = 0, i = 5, i = 6, and i = 11. Figures 5.5(a) through (d) show how the four intervals 0, 5,6, and 11 respectively govern both a model/expansion relation of X to Z0 and an analogous model/expansion relation of (unordered) Z3 to Y. (a) through (d) of the figure show how the two "fourths" of X, transposed variously by i = 0, 5,6, or 11, map into the two "fourths" of Z0; this projects the relation IFUNC(X,Z0)(i) = 2 in each case, (a) through (d) of the figure show analogously how the four possible subtrichords of Z3, all of which are in Forte's set-class 3-5, can each be transposed by one of the key intervals i = 0, 5,6, or 11 so as to map into one of the two subtrichords of Y that lie in the setclass 3-5, both boundary trichords in a certain sense; this projects the analogous relation IFUNC(Z3, Y)(i) = 3 in each case. The latter four mappings, of Z3-trichords into Y-trichords, suggest that Y can be articulated, when heard "against" Z3, as suggested by figure 5.5(e). There we hear Y articulated into a beamed temporal "boundary" comprising the union of its two 3-5 trichords, plus a bracketed temporal "interior" comprising C#, E\>, and D. The articulation of Y in this fashion is reinforced by the coincidence of the interior set (C#, Efr, D) with the cadence set accompanying the melodic Efr that concludes ordered-X in the music. Figure 5.5(f) shows the pitches in the music between the attack of the X-terminating E|? in measure 4 and the comma in measure 5 that separates X from Y in the melody. The set of pitch classes heard in figure 5.5(f) recurs as the interior set of Y, bracketed on figure 5.5(e). A methodological note is in order. Some readers may feel confused rather than enlightened by the variety of ways in which we have shaped and articulated Y during our discussion, specifically in figures 5.2(c), 5.4, and 5.5(e). 3. I am indebted to Taylor Greer for suggesting to me (in another connection) that the "boundary set" of an atonal melodic phrase often has special set-theoretic functions.
95
5.1.3
Generalized Set Theory (1)
FIGURE 5.5
96
If Y "really is" an ornamented version of T3(X), then are we not "wrong" to consider Y as a spatio/temporal gesture framed by T8(X), or to consider Y as articulated by figure 5.5(e)? On the other hand, if Y "really is" a spatio/ temporal gesture framed by T8(X), then are we not "wrong" ... (and so on)? One often hears such notions accompanied by a thought like, "after all, the pianist must decide which way to play it." Concerning these issues, the first thing to be said is that the last remark in the above paragraph seriously under-estimates and misapprehends the resources available to a good pianist (or performer in general) even in a context as constrained as that of the Y-phrase in the music. What one can hear, one can play. Let us suppose now that the possibly unquiet reader does hear something significant, or at least engaging, about each of the Yarticulations. (Otherwise there would be no disquiet and no problem.) The disquietude arises intellectually, from considering Y as something which
Generalized Set Theory (1)
5.1.3
"really is," independent of any specified environment. The interpretation of Y manifest in figure 5.2(c) is not an attempt to get at the "real" structure of Y in a context-free environment; rather it asserts that Y, when heard following X and in connection with the many intervals of 3 between notes of X and notes of Y, will tend to be articulated as in that figure. Likewise, figure 5.4 does not pretend to assert something that Y "really is," context-free. Rather, it asserts a structuring for Y that tends to emerge in the environment, "remembering X and hearing the many intervals of 8 between notes of X and notes of Y." Finally, figure 5.5(e) does not try to assert a "real" form for Y either. Rather, it says that Y will tend to articulate in that way when heard in a complicated environment involving Z3, the idea that Y expands Z3 in a manner analogous to the way Z0 expanded X (as in figures 5.5(a)-(d)), and the effect of the cadence harmony displayed in figure 5.5(f), as that event is recalled in its various contexts. The various IFUNC values of figure 5.3(a) are useful tools, as we have seen, for exploring the multifaceted aspects of Y in various of its environments. Figures 5.2(c) and 5.4 explore two different ways in which Yfollowing-X engages IFUNC; these ways will be of practical interest to the pianist shaping the lyric melody of the right hand over measures 3-7. As we noted before, that is all the lyric melody there is in the piece, and since the melody articulates musically into two phrases, the pianist will naturally want to explore listening to the various kinds of "logic" adhering to the way in which Y follows X. Figures 5.2(c) and 5.4 provide that theoretical "logic" in this environment, the one figure in connection with sensitivity to the interval 3, the other in connection with sensitivity to the interval 8. Figure 5.5(e), in contrast, explores Y as it occurs in a different context, that is as it relates to Z3 in a complex theoretical proportion also involving X and Z0 as in figures 5.5(a)-(d). The corresponding musical environment is now not the way the antecedent and consequent phrases of the lyric melody are shaped in the right hand of the piano, but rather the way in which the violin ostinato comments upon that melody, and is commented upon by it. The new musical environment we are now considering involves an interrelation, or rather several interrelations, between the instruments. This will be of particular interest to the violinist, trying to keep the ostinato figure fresh and alive rather than mechanical. In this environment the second appearance of Z3 will sound different from the first. Figure 5.6 shows what I mean. (a) and (b) of the figure show how the first Z3, at measures 6-7, comments upon the opening trichord of Y at the intervals of 5 and 11 respectively, (c) and (d) of the figure, in contrast, show how the second Z3, during measures 7-8, comments (as well) upon the fresh trichord (B, F, F#) within Y, now that F# has appeared on the scene. The new commentary is at the intervals of 0 and 6. When executing these commentaries, it will help the violinist to listen to Y articulated as in figure 5.5(e) earlier.
97
5.1.3
Generalized Set Theory (1)
FIGURE 5.6
We could of course also consider Y simply in its own environment, spanning various intervals within itself. This would lead us to examine IFUNC(Y, Y), which is essentially Forte's "interval vector of Y." Our study of the Webern passage has made Z0 seem more subordinate than it sounds in the piece; the study so far has also underplayed the role of the 3-note chromatic set (C#, D, E|?), the set which appeared in figure 5.5(e)-(f). A brief discussion of figure 5.7 will attempt to right this balance, without getting fussy about more IFUNC values.
FIGURE 5.7
98
The figure transcribes the noteheads of the ensemble up through the cadence at the bar line of measure 5. Over measures 1 through 3 the music slowly exposes the set W0 = (A, 6(7, A(?). (At the written tempo, this takes over 20 seconds.) The boundary tones for the exposition of W0 are shown on the figure with open noteheads: A is lowest and first; Ab is (so far) highest and last. As the piece continues, the rhythm becomes more active and the registral space expands. By the cadence at measure 5 we hear new boundary tones, also shown with open noteheads: E|?5 is a new highest tone; D3 is a new lowest tone and also a new last tone. The four boundary tones on the figure add up precisely to a large-scale projection of the set Z0 = (A, D, Efc>, Aj?). So Z0 has a
Generalized Set Theory (1)
5.1.5
very strong structural meaning in its own right, by the time it enters in the foreground of measure 6 to begin the violin ostinato. The progre