An Introduction to General Relativity and Cosmology

This page intentionally left blank

An Introduction to General Relativity and Cosmology

General relativity is a cornerstone of modern physics, and is of major importance in its applications to cosmology. Experts in the field Pleba´nski and Krasi´nski provide a thorough introduction to general relativity to guide the reader through complete derivations of the most important results. An Introduction to General Relativity and Cosmology is a unique text that presents a detailed coverage of cosmology as described by exact methods of relativity and inhomogeneous cosmological models. Geometric, physical and astrophysical properties of inhomogeneous cosmological models and advanced aspects of the Kerr metric are all systematically derived and clearly presented so that the reader can follow and verify all details. The book contains a detailed presentation of many topics that are not found in other textbooks. This textbook for advanced undergraduates and graduates of physics and astronomy will enable students to develop expertise in the mathematical techniques necessary to study general relativity.

An Introduction to General Relativity and Cosmology Jerzy Pleba´nski Centro de Investigación y de Estudios Avanzados Instituto Politécnico Nacional Apartado Postal 14-740, 07000 México D.F., Mexico

Andrzej Krasi´nski Centrum Astronomiczne im. M. Kopernika, Polska Akademia Nauk, Bartycka 18, 00 716 Warszawa, Poland

   Cambridge, New York, Melbourne, Madrid, Cape Town, Singapore, São Paulo Cambridge University Press The Edinburgh Building, Cambridge  , UK Published in the United States of America by Cambridge University Press, New York www.cambridge.org Information on this title: www.cambridge.org/9780521856232 © J. Plebanski and A. Krasi nski 2006 This publication is in copyright. Subject to statutory exception and to the provision of relevant collective licensing agreements, no reproduction of any part may take place without the written permission of Cambridge University Press. First published in print format 2006 - -

---- eBook (EBL) --- eBook (EBL)

- -

---- hardback --- hardback

Cambridge University Press has no responsibility for the persistence or accuracy of s for external or third-party internet websites referred to in this publication, and does not guarantee that any content on such websites is, or will remain, accurate or appropriate.

Contents

List of figures The scope of this text Acknowledgements 1

How 1.1 1.2 1.3 1.4

Part I

page xiii xvii xix

the theory of relativity came into being (a brief historical sketch) Special versus general relativity Space and inertia in Newtonian physics Newton’s theory and the orbits of planets The basic assumptions of general relativity

1 1 1 2 4

Elements of differential geometry

7

2

A short sketch of 2-dimensional differential geometry 2.1 Constructing parallel straight lines in a flat space 2.2 Generalisation of the notion of parallelism to curved surfaces

9 9 10

3

Tensors, tensor densities 3.1 What are tensors good for? 3.2 Differentiable manifolds 3.3 Scalars 3.4 Contravariant vectors 3.5 Covariant vectors 3.6 Tensors of second rank 3.7 Tensor densities 3.8 Tensor densities of arbitrary rank 3.9 Algebraic properties of tensor densities 3.10 Mappings between manifolds 3.11 The Levi-Civita symbol 3.12 Multidimensional Kronecker deltas 3.13 Examples of applications of the Levi-Civita symbol and of the multidimensional Kronecker delta 3.14 Exercises

13 13 13 15 15 16 16 17 18 18 19 22 23

v

24 25

vi

Contents

4

Covariant derivatives 4.1 Differentiation of tensors 4.2 Axioms of the covariant derivative 4.3 A field of bases on a manifold and scalar components of tensors 4.4 The affine connection 4.5 The explicit formula for the covariant derivative of tensor density fields 4.6 Exercises

26 26 28 29 30 31 32

5

Parallel transport and geodesic lines 5.1 Parallel transport 5.2 Geodesic lines 5.3 Exercises

33 33 34 35

6

The curvature of a manifold; flat manifolds 6.1 The commutator of second covariant derivatives 6.2 The commutator of directional covariant derivatives 6.3 The relation between curvature and parallel transport 6.4 Covariantly constant fields of vector bases 6.5 A torsion-free flat manifold 6.6 Parallel transport in a flat manifold 6.7 Geodesic deviation 6.8 Algebraic and differential identities obeyed by the curvature tensor 6.9 Exercises

36 36 38 39 43 44 44 45 46 47

7

Riemannian geometry 7.1 The metric tensor 7.2 Riemann spaces 7.3 The signature of a metric, degenerate metrics 7.4 Christoffel symbols 7.5 The curvature of a Riemann space 7.6 Flat Riemann spaces 7.7 Subspaces of a Riemann space 7.8 Flat Riemann spaces that are globally non-Euclidean 7.9 The Riemann curvature versus the normal curvature of a surface 7.10 The geodesic line as the line of extremal distance 7.11 Mappings between Riemann spaces 7.12 Conformally related Riemann spaces 7.13 Conformal curvature 7.14 Timelike, null and spacelike intervals in a 4-dimensional spacetime 7.15 Embeddings of Riemann spaces in Riemann spaces of higher dimension 7.16 The Petrov classification 7.17 Exercises

48 48 49 49 51 51 52 53 53 54 55 56 56 58 61 63 70 72

Contents

vii

8

Symmetries of Riemann spaces, invariance of tensors 8.1 Symmetry transformations 8.2 The Killing equations 8.3 The connection between generators and the invariance transformations 8.4 Finding the Killing vector fields 8.5 Invariance of other tensor fields 8.6 The Lie derivative 8.7 The algebra of Killing vector fields 8.8 Surface-forming vector fields 8.9 Spherically symmetric 4-dimensional Riemann spaces 8.10 * Conformal Killing fields and their finite basis 8.11 * The maximal dimension of an invariance group 8.12 Exercises

74 74 75 77 78 79 80 81 81 82 86 89 91

9

Methods to calculate the curvature quickly – Cartan forms and algebraic computer programs 9.1 The basis of differential forms 9.2 The connection forms 9.3 The Riemann tensor 9.4 Using computers to calculate the curvature 9.5 Exercises

94 94 95 96 98 98

10 The spatially homogeneous Bianchi type spacetimes 10.1 The Bianchi classification of 3-dimensional Lie algebras 10.2 The dimension of the group versus the dimension of the orbit 10.3 Action of a group on a manifold 10.4 Groups acting transitively, homogeneous spaces 10.5 Invariant vector fields 10.6 The metrics of the Bianchi-type spacetimes 10.7 The isotropic Bianchi-type (Robertson–Walker) spacetimes 10.8 Exercises

99 99 104 105 105 106 108 109 112

11 * The Petrov classification by the spinor method 11.1 What is a spinor? 11.2 Translating spinors to tensors and vice versa 11.3 The spinor image of the Weyl tensor 11.4 The Petrov classification in the spinor representation 11.5 The Weyl spinor represented as a 3 × 3 complex matrix 11.6 The equivalence of the Penrose classes to the Petrov classes 11.7 The Petrov classification by the Debever method 11.8 Exercises

113 113 114 116 116 117 119 120 122

viii

Part II

Contents

The theory of gravitation

12 The Einstein equations and the sources of a gravitational field 12.1 Why Riemannian geometry? 12.2 Local inertial frames 12.3 Trajectories of free motion in Einstein’s theory 12.4 Special relativity versus gravitation theory 12.5 The Newtonian limit of relativity 12.6 Sources of the gravitational field 12.7 The Einstein equations 12.8 Hilbert’s derivation of the Einstein equations 12.9 The Palatini variational principle 12.10 The asymptotically Cartesian coordinates and the asymptotically flat spacetime 12.11 The Newtonian limit of Einstein’s equations 12.12 Examples of sources in the Einstein equations: perfect fluid and dust 12.13 Equations of motion of a perfect fluid 12.14 The cosmological constant 12.15 An example of an exact solution of Einstein’s equations: a Bianchi type I spacetime with dust source 12.16 * Other gravitation theories 12.16.1 The Brans–Dicke theory 12.16.2 The Bergmann–Wagoner theory 12.16.3 The conformally invariant Canuto theory 12.16.4 The Einstein–Cartan theory 12.16.5 The bi-metric Rosen theory 12.17 Matching solutions of Einstein’s equations 12.18 The weak-field approximation to general relativity 12.19 Exercises

123 125 125 125 126 129 130 130 131 132 136 136 136 140 143 144 145 149 149 150 150 150 151 151 154 160

13 The Maxwell and Einstein–Maxwell equations and the Kaluza–Klein theory 13.1 The Lorentz-covariant description of electromagnetic field 13.2 The covariant form of the Maxwell equations 13.3 The energy-momentum tensor of an electromagnetic field 13.4 The Einstein–Maxwell equations 13.5 * The variational principle for the Einstein–Maxwell equations 13.6 * The Kaluza–Klein theory 13.7 Exercises

161 161 161 162 163 164 164 167

14 Spherically symmetric gravitational fields of isolated objects 14.1 The curvature coordinates 14.2 Symmetry inheritance

168 168 172

Contents

14.3 14.4 14.5 14.6 14.7 14.8 14.9 14.10 14.11 14.12 14.13 14.14 14.15 14.16 14.17

Spherically symmetric electromagnetic field in vacuum The Schwarzschild and Reissner–Nordström solutions Orbits of planets in the gravitational field of the Sun Deflection of light rays in the Schwarzschild field Measuring the deflection of light rays Gravitational lenses The spurious singularity of the Schwarzschild solution at r = 2m * Embedding the Schwarzschild spacetime in a flat Riemannian space Interpretation of the spurious singularity at r = 2m; black holes The Schwarzschild solution in other coordinate systems The equation of hydrostatic equilibrium The ‘interior Schwarzschild solution’ * The maximal analytic extension of the Reissner–Nordström solution * Motion of particles in the Reissner–Nordström spacetime with e2 < m2 Exercises

ix

172 173 176 183 186 189 191 196 200 202 203 206 207 217 219

15 Relativistic hydrodynamics and thermodynamics 15.1 Motion of a continuous medium in Newtonian mechanics 15.2 Motion of a continuous medium in relativistic mechanics 15.3 The equations of evolution of     and u˙  ; the Raychaudhuri equation 15.4 Singularities and singularity theorems 15.5 Relativistic thermodynamics 15.6 Exercises

222 222 224

16 Relativistic cosmology I: general geometry 16.1 A continuous medium as a model of the Universe 16.2 Optical observations in the Universe – part I 16.2.1 The geometric optics approximation 16.2.2 The redshift 16.3 The optical tensors 16.4 The apparent horizon 16.5 * The double-null tetrad 16.6 * The Goldberg–Sachs theorem 16.7 * Optical observations in the Universe – part II 16.7.1 The area distance 16.7.2 The reciprocity theorem 16.7.3 Other observable quantities 16.8 Exercises

235 235 237 237 239 240 242 243 245 253 253 256 259 260

228 230 231 234

x

Contents

17 Relativistic cosmology II: the Robertson–Walker geometry 17.1 The Robertson–Walker metrics as models of the Universe 17.2 Optical observations in an R–W Universe 17.2.1 The redshift 17.2.2 The redshift–distance relation 17.2.3 Number counts 17.3 The Friedmann equations and the critical density 17.4 The Friedmann solutions with  = 0 17.4.1 The redshift–distance relation in the  = 0 Friedmann models 17.5 The Newtonian cosmology 17.6 The Friedmann solutions with the cosmological constant 17.7 Horizons in the Robertson–Walker models 17.8 The inflationary models and the ‘problems’ they solved 17.9 The value of the cosmological constant 17.10 The ‘history of the Universe’ 17.11 Invariant definitions of the Robertson–Walker models 17.12 Different representations of the R–W metrics 17.13 Exercises 18 Relativistic cosmology III: the Lemaître–Tolman geometry 18.1 The comoving–synchronous coordinates 18.2 The spherically symmetric inhomogeneous models 18.3 The Lemaître–Tolman model 18.4 Conditions of regularity at the centre 18.5 Formation of voids in the Universe 18.6 Formation of other structures in the Universe 18.6.1 Density to density evolution 18.6.2 Velocity to density evolution 18.6.3 Velocity to velocity evolution 18.7 The influence of cosmic expansion on planetary orbits 18.8 * Apparent horizons in the L–T model 18.9 * Black holes in the evolving Universe 18.10 * Shell crossings and necks/wormholes 18.10.1 E < 0 18.10.2 E = 0 18.10.3 E > 0 18.11 The redshift 18.12 The influence of inhomogeneities in matter distribution on the cosmic microwave background radiation 18.13 Matching the L–T model to the Schwarzschild and Friedmann solutions

261 261 263 263 265 265 266 269 270 271 273 277 282 286 287 290 291 293 294 294 294 296 300 301 303 304 306 308 309 311 316 321 325 327 327 328 330 332

Contents

18.14 * General properties of the Big Bang/Big Crunch singularities in the L–T model 18.15 * Extending the L–T spacetime through a shell crossing singularity 18.16 * Singularities and cosmic censorship 18.17 Solving the ‘horizon problem’ without inflation 18.18 * The evolution of R t M versus the evolution of  t M

18.19 * Increasing and decreasing density perturbations 18.20 * L&T curio shop 18.20.1 Lagging cores of the Big Bang 18.20.2 Strange or non-intuitive properties of the L–T model 18.20.3 Chances to fit the L–T model to observations 18.20.4 An ‘in one ear and out the other’ Universe 18.20.5 A ‘string of beads’ Universe 18.20.6 Uncertainties in inferring the spatial distribution of matter 18.20.7 Is the matter distribution in our Universe fractal? 18.20.8 General results related to the L–T models 18.21 Exercises 19 Relativistic cosmology IV: generalisations of L–T and related geometries 19.1 The plane- and hyperbolically symmetric spacetimes 19.2 G3 /S2 -symmetric dust solutions with Rr = 0 19.3 G3 /S2 -symmetric dust in electromagnetic field, the case Rr = 0 19.3.1 Integrals of the field equations 19.3.2 Matching the charged dust metric to the Reissner–Nordström metric 19.3.3 Prevention of the Big Crunch singularity by electric charge 19.3.4 * Charged dust in curvature and mass-curvature coordinates 19.3.5 Regularity conditions at the centre 19.3.6 * Shell crossings in charged dust 19.4 The Datt–Ruban solution 19.5 The Szekeres–Szafron family of solutions 19.5.1 The z = 0 subfamily 19.5.2 The z = 0 subfamily 19.5.3 Interpretation of the Szekeres–Szafron coordinates 19.5.4 Common properties of the two subfamilies 19.5.5 * The invariant definitions of the Szekeres–Szafron metrics 19.6 The Szekeres solutions and their properties 19.6.1 The z = 0 subfamily 19.6.2 The z = 0 subfamily 19.6.3 * The z = 0 family as a limit of the z = 0 family 19.7 Properties of the quasi-spherical Szekeres solutions with z = 0 =  19.7.1 Basic physical restrictions 19.7.2 The significance of 

xi

332 337 339 347 348 349 353 353 353 357 357 359 359 362 362 363 367 367 369 369 369 375 377 379 382 383 384 387 388 392 394 396 397 399 399 400 401 403 403 404

xii

Contents

19.7.3 Conditions of regularity at the origin 19.7.4 Shell crossings 19.7.5 Regular maxima and minima 19.7.6 The apparent horizons 19.7.7 Szekeres wormholes and their properties 19.7.8 The mass-dipole 19.8 * The Goode–Wainwright representation of the Szekeres solutions 19.9 Selected interesting subcases of the Szekeres–Szafron family 19.9.1 The Szafron–Wainwright model 19.9.2 The toroidal Universe of Senin 19.10 * The discarded case in (19.103)–(19.112) 19.11 Exercises

407 410 413 414 418 419 421 426 426 428 431 435

20 The Kerr solution 20.1 The Kerr–Schild metrics 20.2 The derivation of the Kerr solution by the original method 20.3 Basic properties 20.4 * Derivation of the Kerr metric by Carter’s method – from the separability of the Klein–Gordon equation 20.5 The event horizons and the stationary limit hypersurfaces 20.6 General geodesics 20.7 Geodesics in the equatorial plane 20.8 * The maximal analytic extension of the Kerr spacetime 20.9 * The Penrose process 20.10 Stationary–axisymmetric spacetimes and locally nonrotating observers 20.11 * Ellipsoidal spacetimes 20.12 A Newtonian analogue of the Kerr solution 20.13 A source of the Kerr field? 20.14 Exercises

438 438 441 447

21 Subjects omitted from this book

498

References Index

501 518

452 459 464 466 475 486 487 490 493 494 495

Figures

1.1 1.2 2.1 2.2 2.3 6.1 7.1 7.2 7.3 8.1 8.2 11.1 12.1 12.2 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 14.9 14.10 14.11 14.12 14.13 14.14

Real planetary orbits. page 3 A vehicle flying across a light ray. 5 Parallel straight lines. 9 Parallel transport on a curved surface. 11 Parallel transport on a sphere. 11 One-parameter family of loops. 41 A light cone. 61 A non geodesic null line. 62 The Petrov classification. 71 A mapping of a manifold. 74 Surface-forming vector fields. 82 The Penrose–Petrov classification. 117 Fermi coordinates. 127 Gravitational field of a finite body. 157 Deflection of light rays. 185 Measuring the deflection of light, Eddington’s method. 187 Measuring the deflection of microwaves. 188 A gravitational lens. 189  r − 1. 193 Graph of r = r + 2m ln  2m The Kruskal diagram. 195 The surface t = const  = /2 in the Schwarzschild spacetime. 197 Embedding of the Schwarzschild spacetime in six dimensions projected 198 onto Z1  Z2  Z3 . Embedding of the Schwarzschild spacetime in six dimensions projected 199 onto Z3  Z4  Z5 . 211 The maximally extended Reissner–Nordström spacetime, e2 < m2 . The ‘throat’ in the Schwarzschild and in the R–N spacetime. 213 Embeddings of the v = 0 surface. 214 Surfaces of Fig. 14.12 placed in correct positions. 214 Maximal extension of the extreme R–N metric. 216 xiii

xiv

14.15 15.1 16.1 16.2 17.1 17.2 17.3 17.4 17.5 17.6 17.7 18.1 18.2 18.3 18.4 18.5 18.6 18.7 18.8 18.9 18.10 18.11 18.12 18.13 18.14 18.15 19.1 19.2 19.3 19.4 19.5 19.6 19.7 20.1 20.2 20.3 20.4 20.5 20.6 20.7 20.8

Figures

Embeddings of the t = const  = /2 surface of the extreme R–N metric. An everywhere concave function. Refocussing of light in the Universe. Reciprocity theorem. R t in Friedmann models. ˙ = 0 in the R  plane. Curves R Recollapsing Friedmann models.  = E Friedmann models. Remaining Friedmann models. Illustration to (17.62). The ‘horizon problem’ in R–W. Black hole in the E < 0 L–T model. 3-d graph of black hole formation. Contours of constant R-value. The compactified diagram of Fig. 18.1. The event horizon in the frame of Fig. 18.1. A neck. Radial rays in around central singularity. A shell crossing in comoving coordinates. A shell crossing in Gautreau coordinates. A naked shell crossing. Solutions of s = S − sS  . Solution of the ‘horizon problem’ in L–T. Evolution of the t r subspace in (18.198). The model of (18.202)–(18.205). A ‘string of beads’ Universe. Stereographic projection to Szekeres–Szafron coordinates. Circles C1 and C2 projected as disjoint. Circles C1 and C2 projected one inside the other. A Szekeres wormhole as a handle. Szafron–Wainwright model. A 2-torus. The 3-torus with the metric (19.311). Ellipsoids and hyperboloids. A surface of constant . Space t = const in the Kerr metric, case a2 < m2 . Space t = const in the Kerr metric, case a2 = m2 . Space t = const in the Kerr metric, case a2 > m2 . Light cones in the Kerr spacetime. Emin r /0 − 1 for different values of Lz . Analogue of Fig. 20.7 for null geodesics.

217 231 255 256 270 274 275 276 277 280 283 318 319 320 322 323 326 335 339 340 343 346 348 356 358 360 396 417 417 419 428 428 429 449 450 460 461 462 463 468 470

Figures

20.9 20.10 20.11 20.12 20.13 20.14 20.15 20.16 20.17

Allowed ranges of  and  for null geodesics, case a2 < m2 . Allowed ranges of  and  for null geodesics, case a2 = m2 . Allowed ranges of  and  for null geodesics, case a2 > m2 . Allowed ranges of  and  for timelike geodesics. Extending r > r+ along -field and k-field. Maximally extended Kerr spacetime. Axial cross-section through (20.154). Maximally extended extreme Kerr spacetime. A discontinuous time coordinate.

xv

472 473 473 474 478 482 485 486 489

The scope of this text

General relativity is the currently accepted theory of gravitation. Under this heading one could include a huge amount of material. For the needs of this theory an elaborate mathematical apparatus was created. It has partly become a self-standing sub-discipline of mathematics and physics, and it keeps developing, providing input or inspiration to physical theories that are being newly created (such as gauge field theories, supergravitation, and, more recently, the brane-world theories). From the gravitation theory, descriptions of astronomical phenomena taking place in strong gravitational fields and in large-scale sub-volumes of the Universe are derived. This part of gravitation theory develops in connection with results of astronomical observations. For the needs of this area, another sophisticated formalism was created (the Parametrised Post-Newtonian formalism). Finally, some tests of the gravitational theory can be carried out in laboratories, either terrestrial or orbital. These tests, their improvements and projects of further tests have led to developments in mathematical methods and in technology that are by now an almost separate branch of science – as an example, one can mention here the (monumentally expensive) search for gravitational waves and the calculations of properties of the wave signals to be expected. In this situation, no single textbook can attempt to present the whole of gravitation theory, and the present text is no exception. We made the working assumption that relativity is part of physics (this view is not universally accepted!). The purpose of this course is to present those results that are most interesting from the point of view of a physicist, and were historically the most important. We are going to lead the reader through the mathematical part of the theory by a rather short route, but in such a way that the reader does not have to take anything on our word, is able to verify every detail, and, after reading the whole text, will be prepared to solve several problems by him/herself. Further help in this should be provided by the exercises in the text and the literature recommended for further reading. The introductory part (Chapters 1–7), although assembled by J. Pleba´nski long ago, has never been published in book form.1 It differs from other courses on relativity in that it introduces differential geometry by a top-down method. We begin with general manifolds, 1

A part of that material had been semi-published as copies of typewritten notes (Pleba´nski, 1964).

xvii

xviii

The scope of this text

on which no structures except tensors are defined, and discuss their basic properties. Then we add the notion of the covariant derivative and affine connection, without introducing the metric yet, and again proceed as far as possible. At that level we define geodesics via parallel displacement and we present the properties of curvature. Only at this point do we introduce the metric tensor and the (pseudo-)Riemannian geometry and specialise the results derived earlier to this case. Then we proceed to the presentation of more detailed topics, such as symmetries, the Bianchi classification and the Petrov classification. Some of the chapters on classical relativistic topics contain material that, to the best of our knowledge, has never been published in any textbook. In particular, this applies to Chapter 8 (on symmetries) and to Chapter 16 (on cosmology with general geometry). Chapters 18 and 19 (on inhomogeneous cosmologies) are entirely based on original papers. Parts of Chapters 18 and 19 cover the material introduced in A. K.’s monograph on inhomogeneous cosmological models (Krasi´nski, 1997). However, the presentation here was thoroughly rearranged, extended, and brought up to date. We no longer briefly mention all contributions to the subject; rather, we have placed the emphasis on complete and clear derivations of the most important results. That material has so far existed only in scattered journal papers and has been assembled into a textbook for the first time (A. K.’s monograph (Krasi´nski, 1997) was only a concise review). Taken together, this collection of knowledge constitutes an important and interesting part of relativistic cosmology whose meaning has, unfortunately, not yet been appreciated properly by the astronomical community. Most figures for this text, even when they look the same as the corresponding figures in the papers cited, were newly generated by A. K. using the program Gnuplot, sometimes on the basis of numerical calculations programmed in Fortran 90. The only figures taken verbatim from other sources are those that illustrated the joint papers by C. Hellaby and A. K. J. Pleba´nski kindly agreed to be included as a co-author of this text – having done his part of the job more than 30 years ago. Unfortunately, he was not able to participate actively in the writing up and proofreading. He died while the book was being edited. Therefore, the second author (A. K.) is exclusively responsible for any errors that may be found in this book. Note for the reader. Some parts of this book may be skipped on first reading, since they are not necessary for understanding the material that follows. They are marked by asterisks. Chapters 18 and 19 are expected to be the highlights of this book. However, they go far beyond standard courses of relativity and may be skipped by those readers who wish to remain on the well-beaten track. Hesitating readers may read on, but can skip the sections marked by asterisks. Andrzej Krasi´nski Warsaw, September 2005

Acknowledgements

We thank Charles Hellaby for comments on the various properties of the Lemaître– Tolman models and for providing copies of his unpublished works on this subject. Some of the figures used in this text were copied from C. Hellaby’s files, with his permission. We are grateful to Pankaj S. Joshi for helpful comments on cosmic censorship and singularities, and to Amos Ori for clarifying the matter of shell crossings in charged dust. The correspondence with Amos significantly contributed to clarifying several points in Section 19.3. We are also grateful to George Ellis for his very useful comments on the first draft of this book. We thank Bogdan Mielnik and Maciej Przanowski, who were of great help in the difficult communication between one of the authors residing in Poland and the other in Mexico. M. Przanowski has carefully proofread a large part of this text and caught several errors. So did Krzysztof Bolejko, who was the first reader of this text, even before it was typed into a computer file. J. P. acknowledges the support from the Consejo Nacional de Ciencia y Tecnología projects 32427E and 41993F.

xix

1 How the theory of relativity came into being (a brief historical sketch)

1.1 Special versus general relativity The name ‘relativity’ covers two physical theories. The older one, called special relativity, published in 1905, is a theory of electromagnetic and mechanical phenomena taking place in reference systems that move with large velocities relative to an observer, but are not influenced by gravitation. It is considered to be a closed theory. Its parts had entered the basic courses of classical mechanics, quantum mechanics and electrodynamics. Students of physics study these subjects before they begin to learn general relativity. Therefore, we shall not deal with special relativity here. Familiarity with it is, however, necessary for understanding the general theory. The latter was published in 1915. It describes the properties of time and space, and mechanical and electromagnetic phenomena in the presence of a gravitational field.

1.2 Space and inertia in Newtonian physics In the Newtonian mechanics and gravitation theory the space was just a background – a room to be filled with matter. It was considered obvious that the space is Euclidean. The masses of matter particles were considered their internal properties independent of any interactions with the remaining matter. However, from time to time it was suggested that not all of the phenomena in the Universe can be explained using such an approach. The best known among those concepts was the so-called Mach’s principle. This approach was made known by Ernst Mach in the second half of the nineteenth century, but had been originated by the English philosopher Bishop George Berkeley, in 1710, while Newton was still alive. Mach started with the following observation: in the Newtonian mechanics a seemingly obvious assumption is tacitly made, namely that all the space points can be labelled, for example by assigning Cartesian coordinates to them. One can then observe the motion of matter by finding in which point of space a given particle is located at a given instant. However, this is not actually possible. If we accept another basic assumption of Newton, namely that the space is Euclidean, then its points do not differ from one another in any way. They can be labelled only by matter being present in the space. In truth, we thus can observe only the motion of one portion of matter relative to another portion of matter. Hence, a correctly formulated theory should speak only about 1

2

A brief history

relative motion (of matter relative to matter), not about absolute motion (of matter relative to space). If this is so, then the motion of a single particle in a totally empty Universe would not be detectable. Without any other matter we could not establish whether the lone particle is at rest, or is moving or experiencing acceleration. But the reaction of matter to acceleration is the only way to measure its inertia. Hence, that lone particle would have zero inertia. It follows then that inertia is, likewise, not an absolute property of matter, but is relative, and is induced by the remaining matter in the Universe, supposedly via the gravitational interaction. One can question this principle in several ways. No-one will ever be able to find him/herself in an empty Universe, so any theorems on such an example cannot be verified. It is possible that the inertia of matter is a ‘stronger’ property than the homogeneity of space, and would still exist in an empty Universe, thus making it possible to measure absolute acceleration. Criticism of Mach’s principle is made easier by the fact that it has never been formulated as a precise physical theory. It is just a collection of critical remarks and suggestions, partly based on calculations. It happens sometimes, though, that a new way of looking at an old theory, even if not sufficiently well justified, becomes a starting point for meaningful discoveries. This was the case with Mach’s principle that inspired Einstein at the starting point of his work.

1.3 Newton’s theory and the orbits of planets In addition to the above-mentioned theoretical problem, Newton’s theory had a serious empirical problem. It was known already in the first half of the nineteenth century that the planets revolve around the Sun in orbits that are not exactly elliptic. The real orbits are rosettes – curves that can be imagined as follows: let a point go around an ellipse, but at the same time let the ellipse rotate slowly around its focus in the same direction (see Fig. 1.1). Newton’s theory explained this as follows: an orbit of a planet is an exact ellipse only if we assume that the Sun has just one planet.1 Since the Sun has several planets, they interact gravitationally and mutually perturb their orbits. When these perturbations are taken into account, the effect is qualitatively the same as observed. However, in 1859, Urbain J. LeVerrier (the same person who, a few years earlier, had predicted the existence of Neptune on the basis of similar calculations) verified whether the calculated and observed motions of Mercury’s perihelion agree. It turned out that they do not – and that the discrepancy is much larger than the observational error. The calculated velocity of rotation of the perihelion was smaller than the one observed by 43 (arc seconds) per century (the modern result is 4311 ± 045 per century (Will, 1981)). Astronomers and physicists tried to explain this effect in various simple ways, e.g. by assuming that yet another planet, called Vulcan, revolves around the Sun 1

More assumptions were actually made, but the other ones seemed so obvious at that time that they were not even mentioned: that the Sun is exactly spherical, and that the space around the Sun is exactly empty. None of these is strictly correct, but the departures of observations from theory caused by the non-sphericity of the Sun and by the interplanetary matter are insignificant.

1.3 Newton’s theory and the orbits of planets

3

Fig. 1.1. Real planetary orbits, in consequence of various perturbations, are not ellipses, but nonclosed curves. The angle of revolution of the perihelion shown in this figure is greatly exaggerated. In reality, the greatest angle of perihelion motion observed in the Solar System, for Mercury, equals approximately 15 per 100 years.

inside Mercury’s orbit and perturbs it; by allowing for gravitational interaction of Mercury with the interplanetary dust; or by assuming that the Sun is flattened in consequence of its rotation. In the last case, the gravitational field of the Sun would not be spherically symmetric, and a sufficiently large flattening would explain the additional rotation of Mercury’s perihelion. All these hypotheses did not pass the observational tests. The hypothetical planet Vulcan would have to be so massive that it would be visible in telescopes, but wasn’t. There was not enough interplanetary dust to cause the observed effect. The Sun, if it were sufficiently flattened to explain Mercury’s motion, would cause yet another effect: the planes of the planetary orbits would swing periodically around their mean positions with an amplitude of about 43 per century, and that motion would have been observed, but wasn’t (Dicke, 1964). In spite of these difficulties, nobody doubted the correctness of Newton’s theory. The general opinion was that Mach’s critique would be answered by formal corrections in the theory, and the anomalous perihelion motion of Mercury would be explained by new observational discoveries. Nobody expected that any other gravitation theory could replace Newton’s that had been going from one success to another for over 200 years. General relativity was not created in response to experimental or observational needs. It resulted from speculation, it preceded all but one of the experiments and observations

4

A brief history

that confirmed it, and it became broadly testable only about 50 years after it had been created, in the 1960s. So much time did technology need to catch up and go beyond the opportunities provided by astronomical phenomena.

1.4 The basic assumptions of general relativity It is interesting to follow the development of relativistic ideas in the same order as that in which they actually appeared in the literature. However, this was not a straight and smooth road. Einstein made a few mistakes and put forward a few hypotheses that he had to revoke later. He had been constructing the theory gradually, while at the same time learning the Riemannian geometry – the mathematical basis of relativity. If we followed that gradual progress, we would have to take into account not only some blind paths, but also competitors of Einstein, some of whom questioned the need for the (then) new theory, while some others tried to get ahead of Einstein, but without success (Mehra, 1974). Learning relativity in this way would not be efficient, so we will take a shortcut. We shall begin by justifying the need for relativity theory, then we shall present the basic elements of Riemann’s geometry, and then we will present Einstein’s theory in its final shape. The history of relativity’s taking shape is presented in Mehra’s book (Mehra, 1974), and its original presentation is to be found in the collection of classic papers (Einstein et al., 1923). Einstein’s starting point was a critique of Newton’s theory based on Mach’s ideas. Newtonian physics said that, in a space free of any interactions, material bodies would either remain at rest or would move by uniform rectilinear motion. Since, however, the real Universe is permeated by gravitational fields that cannot be shielded, all bodies in the Universe move on curved trajectories in consequence of gravitational interactions. There is a problem here. When we say that a trajectory is curved, we assume that we can define a straight line. But how can we do this when no actual body follows a straight line? The terrestrial standards of straight lines are useful only because no distances on the Earth are truly great, and at short distances the deformation of ‘rigid’ bodies due to gravitation is unmeasurably small. Maybe then the trajectory of a light ray would be a good model of a straight line? To see whether this could be the case, consider two Cartesian reference systems K and K  , whose axes x y z and x  y  z  are, respectively, parallel. Let K be inertial, and let K  move with respect to K along the z-axis with acceleration gt x y z. Let the origins of both systems coincide at t = 0. Then  t   x = x y = y z = z − d ds gs x y z 0

0

Hence, the equations of motion of a free particle, that in K are d2 x d2 y d2 z = 2 = 2 = 0 dt2 dt dt

1.4 Basic assumptions of general relativity

5

in K  assume the form d2 y d 2 x = 2 = 0 2 dt dt

d 2 z = −gt x y z dt2

The quantity that we interpreted in K as acceleration would be interpreted in K  as the intensity of a gravitational field (with opposite sign). The gravitational field can thus be simulated by accelerated motion, or, more exactly, the gravitational force is simulated by the force of inertia. If so, then light in a gravitational field should behave similarly to when it is observed from an accelerated reference system. How would we see a light ray in such a system? Imagine a space vehicle that flies across a light ray. Let the light ray enter through the window W and fall on a screen on the other side of the vehicle (see Fig. 1.2). If the vehicle were at rest, the light ray entering at W would hit the screen at the point A. Since the vehicle keeps flying, it will move a bit before the ray hits the screen, and the bright spot will appear at the point B. Now assume that the light ray indeed moves in a straight line when observed by an observer who is at rest. Then it is easy to see that the path WB will be straight when the vehicle moves with a constant velocity, whereas it will be curved when the vehicle moves with acceleration. Hence, if the gravitational field behaves analogously to the field of inertial forces, then the light ray should be deflected also by gravitation. Consequently, it cannot be the standard of a straight line. If we are unable to provide a physical model of a fundamental notion of Newtonian physics, let us try to do without it. Let us assume that no such thing exists as ‘gravitational forces’ that curve the trajectories of celestial bodies, but that the geometry of space is

v

W A

B

Fig. 1.2. A space vehicle flying across a light ray. See the explanation in the text.

6

A brief history

modified by gravitation in such a way that the observed trajectories are paths of free motion. Such a theory might be more complicated than the Newtonian one in practical instances, but it will use only such notions as are related to actual observations, without an unobservable background of the Euclidean space. A modified geometry means non-Euclidean geometry. A theory created in order to deal with broad classes of non-Euclidean geometries is differential geometry. It is the mathematical basis of general relativity, and we will begin by studying it.

Part I Elements of differential geometry

2 A short sketch of 2-dimensional differential geometry

2.1 Constructing parallel straight lines in a flat space The classical Greek geometric constructions, with the help of rulers and compasses, fail over large distances. For example, if we wish to construct a straight line parallel to the momentary velocity of the Earth that passes through a given point on the Moon, compasses and rulers do not help. What method might work in such a situation? For the beginning, let us assume that great distance is our only problem – that we live in a space without gravitation, so we can use a light ray or the trajectory of a stone shot from a sling as a model of a straight line. Assume that an observer is at the point A (see Fig. 2.1) on the straight line p, and wants to construct a straight line through the point B that would be parallel to p. The

B

q

α

p

3

p

2

p

1

p

α A

Fig. 2.1. the text.

Constructing parallel straight lines at a distance in a flat space. See the explanation in

9

10

Two-dimensional differential geometry

following programme is ‘technically realistic’: we first determine the straight line passing through both A and B (for example, by directing a telescope towards B), then we measure the angle  between the lines p and AB, then, from B, we construct a straight line q that is inclined to AB at the same angle  and lies in the same plane as p and AB. The second condition requires that we can control points of q other than B, and it can pose some problems. However, if our observer is able to construct parallel straight lines that are not too distant from the given one, he/she can carry out the following operation: the observer moves from A to A1 , constructs a straight line p1  p, then moves on to A2 , constructs a straight line p2  p1 , etc., until, in the nth step, he/she reaches B and constructs q = pn  pn−1 there. This construction can be generalised. The observer does not have to move from A to B on a straight line. He/she can start from A in an arbitrary direction and, at a point A1 , construct a straight line parallel to p; it has to lie in the plane pAA1 and be inclined to AA1 at the same angle as p. Then, from A1 the observer can continue in still another arbitrary direction and at a point A2 repeat the construction: a straight line p2 has to lie in the plane p1 A1 A2 and be inclined to A1 A2 at the same angle as p1 was. When the broken line he/she is following reaches B, the last straight line will be the one we wanted to construct. We can imagine broken lines whose straight segments are becoming still shorter. In the limit, we conclude that we would be able to carry out this construction along an arbitrary differentiable curve. The plane needed in the construction will be in each step determined by the tangent vector of the curve and the last straight line we had constructed. In this way, we arrived at the idea of constructing parallel straight lines by parallely transporting directions. Note that a straight line is privileged in this construction: this is the only line to which the parallely transported direction is inclined always at the same angle. In particular, a vector tangent to a straight line, when transported parallely along this line, remains tangent to it at every point. A straight line can be defined by this property, provided we are able to define what it means to be parallel without first invoking the notion of a straight line. One possible definition is this: a vector field vx defined along a curve C ⊂ Rn consists of parallel vectors (or, in other words, is parallely transported along C) when there exists a coordinate system such that vi /xj ≡ 0.

2.2 Generalisation of the notion of parallelism to curved surfaces On a curved surface, the analogue of a straight line is a geodesic line. This is a curve whose arc PQ (see Fig. 2.2) is the shortest among all curved arcs connecting P and Q. Note that, unlike on a plane or in a flat space, the vector tangent to a curve on a curved surface S is not a subset of this surface. The collection of all vectors tangent to the surface S at a point p ∈ S spans a plane tangent to S at P. On a curved surface S, parallel transport is defined as follows. Suppose that we are given the pair of points P and Q, an arc of a curve C connecting P and Q and a vector tangent to S at P that we plan to parallely transport to Q. If C is a geodesic, then we

2.2 Parallelism on curved surfaces

11

Q C

P v

Fig. 2.2. Parallel transport of vectors on a curved surface. See the explanation in the text.

transport the vector v along it in such a way that it is everywhere inclined to the tangent vector of C at the same angle. If C is not a geodesic, then we proceed as follows: 1. 2. 3. 4.

We We We We

divide the arc PQ into n segments. connect the ends of each arc by a geodesic. transport v parallely along each geodesic arc. calculate the result of this operation as n → .

It is easy to note that the parallel transport thus defined depends on the curve along which the transport was carried out. For example, consider a sphere, its pole C and two points A and B lying on the equator, 90 away from each other (Fig. 2.3). Let v be the vector tangent to the equator at A. Transport v parallely to C along the arc AC, and then again along the arcs AB and BC. All three arcs are parts of great circles, which are geodesics, so v makes always the same angle with the tangent vectors of the arcs. The first transport will yield a vector at C that is tangent to BC, while the second one will yield a vector at C perpendicular to BC. In consequence, if we transport (in differential C

B A

Fig. 2.3. Parallel transport of vectors on a sphere. See the explanation in the text.

12

Two-dimensional differential geometry

geometry one says ‘drag’) a vector along a closed loop, we will not obtain the same vector that we started with. The curvature of the surface is responsible for this. The connection between the initial vector, the final vector and the curvature is rather complicated; we will come to it further on. We have discussed 2-dimensional surfaces in this chapter in order to visualise things more easily. However, this gave us an unfair advantage: on a 2-dimensional surface, the direction inclined to a given tangent vector at a given angle is uniquely determined. In spaces of higher dimension we will need a definition of ‘parallelism at a distance’ that will be analogous to vi /xj = 0 that we used in a flat space.

3 Tensors, tensor densities

3.1 What are tensors good for? In Newtonian physics, a preferred class of reference systems is used. They are the inertial systems – those in which the three Newtonian principles of dynamics hold true. However, it may be difficult in practice to identify the inertial systems. As we have seen in Chapter 1, the inertial force imitates the gravitational force, so it may not be easy to make sure whether a given object moves with acceleration or remains at rest in a gravitational field. Hence, the laws of physics should be formulated in such a way that no reference system is privileged. The choice of a reference system, even when it is evidently convenient (e.g. the centre of mass system), is an act of human will, while the laws of physics should not depend on our decisions. Tensors are objects defined so that no reference system is privileged. For the beginning, we will settle for a vague definition that we will make precise later. Suppose we change  the coordinate system in an n-dimensional space from x ,  = 1 2    n to x ,   = 1 2    n. A tensor is a collection of functions on that space that changes in a specific way under such a coordinate transformation. The appropriate class of spaces and the ‘specific way’ in which the functions change will be defined in subsequent sections.

3.2 Differentiable manifolds As already stated, in relativity we will be using non-Euclidean spaces. The most general class of spaces that we will consider are differentiable manifolds. This is a generalisation of the notion of a curved surface for which a tangent plane exists at every point of it. An n-dimensional differentiable manifold of class p is a space Mn in which every point x has a neighbourhood x such that the following conditions hold: 1. There exists a one-to-one mapping x of the neighbourhood x onto a subset of Rn , called a map of x . The coordinates of the image x x are called the coordinates of x ∈ Mn . 2. If the neighbourhoods x and y of x y ∈ Mn have a non-empty intersection x ∩ y = ∅ , x is a map of x and y is a map of y , then the mappings y  x −1 and y  x −1 −1 are mappings of class p of Rn into itself. 13

14

Tensors, tensor densities

A tangent space to the manifold Mn at the point x is a vector space spanned by vectors tangent at x to curves in Mn that pass through x. If x x = x1     xn  are the coordinates of the point x, then the equation xi = constant, where i ∈ 1    n is a fixed index, defines a hypersurface in Rn and thus also a hypersurface H in Mn . A coordinate system is thus a set of n one-parameter families of hypersurfaces, xi being the parameter in the ith family. Now let the manifold be Rn . Each hypersurface H defines then a family of vectors: if

x = C (where C is an arbitrary constant) is the equation of H, then  /x , where x  are the coordinates of the point x, is an equation of a family of vectors attached to H and orthogonal to it. Taking all the hypersurfaces of the = C family, we obtain a family of curves tangent to the vectors  /x . Thus, each coordinate system in Rn defines a family of curves. The converse is not true: an n-parameter family of curves Cx in Rn defines a family of hypersurfaces orthogonal to Cx only when the vectors tangent to Cx have zero rotation (to be defined later). The reason why, for this example, we had to take the special case of Mn = Rn is that, as we shall see later, in a general vector space vectors like the gradient of a function (called covariant vectors) and vectors like a tangent vector to a curve (called contravariant vectors) are unrelated objects of different kinds. A relation between them exists only in spaces tangent to such manifolds in which a metric is defined, see Chapter 7. Rn is one of them. Without a metric, a covariant vector cannot be converted into a contravariant one, and a curve tangent to a field of covariant vectors cannot be constructed. Let U ⊂ Mn be an open subset. Suppose we are given a collection of n families of curves, each of (n − 1) parameters such that n curves pass through each point x ∈ U. Suppose that the tangent vectors to these curves are linearly independent at every x ∈ U. Then the tangent vectors to these curves at the point x, ea x a=1n are a basis of the space tangent to Mn at x. Let vx be an arbitrary vector tangent to Mn at x. Then v=

n 

va x ea x 

a=1

The coefficients va  are called the components of the vector v in the basis ea x . The mapping x → vx assigns to each point x ∈ U ⊂ Mn a vector tangent to Mn at x and is called a vector field on U. Note that the vectors of a vector field are defined on tangent spaces to the manifold, while the components of vector fields are functions on the manifold. In particular, the vectors ea x can be identified with directional derivatives, and can be defined by a coordinate system as ea x x = /xa x (that is, the ath vector in the basis is the directional derivative down the ath family of hypersurfaces in the coordinate system.) Then the va are components of the vector v in the coordinate system x. Again, they are functions on the manifold. We adopt three conventions.

3.4 Contravariant vectors

15

1. If any index in a formula appears twice, a sum over all of its values is implied. Hence, if  changes from 1 to n, while V  and U  ,  = 1    n are collections of functions labelled by , then U  V ≡

n 

U  V 

=1

2. The collection of all coordinates x ,  = 1    n will be denoted x, and a function fx will be denoted fx . 3. The derivative with respect to x will be denoted by a comma followed by a subscript: thus f f ≡   x

3.3 Scalars The simplest tensor is a scalar. It is a function on a manifold whose value, when the coordinate system is transformed, changes simply by substituting the transformation in its argument:  x x = x 

(3.1)

Examples of scalars are physical constants, rest masses of elementary particles, their electric charges, a density distribution in a continuous medium. The coordinates of a point in a manifold are scalars, too, since their values transform by the simple law (3.1) when coordinates are changed from x  to x : x x x = x x . 3.4 Contravariant vectors The functions v x ,  = 1    n are said to be coordinates of a contravariant vector field when, by a change of coordinates on Mn , they transform by the law 





v x x = x  v x 

(3.2)

Examples are vectors tangent to curves. Suppose that a curve C is given by the parametric equations t → x t ,  = 1    n, t ∈ a b ⊂ R1 , where x is the value of a coordinate of a point on the curve. An arbitrary field of vectors tangent to C is then given by dx t → v t = fx gt  dt where fx is an arbitrary function of the coordinates and gt is an arbitrary function of the parameter. When the coordinate system is changed from x to x , we have 



v t = fx x gt in agreement with (3.2).

dx dx  = fx gt x   dt dt

16

Tensors, tensor densities

3.5 Covariant vectors The functions u x ,  = 1    n are said to be coordinates of a covariant vector field when, by a change of coordinates on Mn , they transform by the law u x x = x  u x 

(3.3)

By convention, the indices of contravariant vectors are placed as superscripts, whereas those of covariant vectors are placed as subscripts. An example of a covariant vector is the gradient of a scalar function x . For such a function we have  x x = x   x  in agreement with (3.3). Note that the quantity v u is a scalar, since we have      v u = x  v x  u = x  x  v u = x   v  u  =    v  u  = v  u   Another example of a scalar field is the directional derivative of a scalar field along a def contravariant vector field, v = v  .

3.6 Tensors of second rank Scalars are sometimes called tensors of rank zero, to emphasise that they have no indices. The contravariant and covariant vectors are collectively called tensors of rank 1. The tensors of rank 2 are objects whose components are labelled by two indices. There are three kinds of them: 1. Doubly contravariant tensors. Their components T  x transform under a coordinate transformation x → x on Mn as follows:  





T   x x = x  x  T  x 

(3.4)

2. Doubly covariant tensors. These are quantities whose components T x transform by the rule T  x x = x  x  T x 

(3.5)

3. Mixed tensors. Their components transform by the rule 



T  x x = x  x  T  x 

(3.6)

The collection of components of a second-rank tensor is a square matrix that transforms in a prescribed way when coordinates are changed.

3.7 Tensor densities

17

An example of a doubly covariant tensor is a matrix of a quadratic form,

A =  A A  where A are components of a contravariant vector, and the value of A is a scalar. An example of a mixed tensor of rank 2 is a matrix of a mapping of one vector space into another, V  = B  W   where V  and W  are contravariant vectors in different vector spaces. We will meet examples of doubly contravariant vectors later in this book. The simplest example is the inverse matrix to a matrix of a quadratic form, but in order to be able to prove this we have to learn about some other objects. The quantity T for a mixed tensor (the sum of its diagonal components) is called the  trace of T and is a scalar. Quantities like  T  for a contravariant second-rank tensor  and  T for a covariant second-rank tensor are not tensorial objects. Summations over indices standing on the same level occur only exceptionally in differential geometry – for example, when a calculation is done in a chosen coordinate system.

3.7 Tensor densities A tensor density differs from the corresponding tensor in that, when transformed from one coordinate system to another, it gets multiplied by a certain power of the Jacobian of the transformation. The exponent of the Jacobian is called the weight of the density. For example, a scalar density of weight w transforms as follows: 

x

x = x 

w



x 

(3.7)

a contravariant vector density of weight w transforms by the rule 



v x =

x x

w



x  v x 

(3.8)

and so on. An example of a scalar density is the element of volume in a multidimensional integral. It transforms by the law dn x =

x d x  x n

so it is a scalar density of weight +1. An arbitrary tensor is by definition a tensor density of weight zero.

(3.9)

18

Tensors, tensor densities

3.8 Tensor densities of arbitrary rank The components of a tensor density of weight w k times contravariant and l times covariant, transform by the law   w x    1 2 k  x1 1 x2 2    xk k T   x x = 1 2 l x   

×x1 1 x2 2    xl l T1122lk x 

(3.10)

Such an object is called a tensor density of type w k l. For general tensor densities one can carry out an operation that is analogous to finding the trace of a mixed tensor of rank 2. This operation is called contraction. It consists in making an upper index equal to a lower index, and summing over all its allowed values. The resulting density is of type w k − 1 l − 1, thus  





 





1 i−1 i+1 k i−1 i+1 k

contracted T11 j−1 j+1 l x = T1 j−1 j+1 l x

(3.11)

(note that a sum over all values of  is implied above). The indices over which the summing is carried out are called ‘dummy indices’ since they do not show up in the transformation law of the contracted density. The contraction may be done over several pairs of indices at the same time. Then, one must take care to give different names to each pair of dummy indices, to avoid confusion.

3.9 Algebraic properties of tensor densities Here is a list of the most basic properties of tensor densities.   ≡ 0 in one coordinate system, then T ≡ 0 in all coordinate systems 1. If T (this follows easily from the transformation law). 2. A linear combination of two tensor densities of type w k l is a tensor density of the same type. (Adding tensor densities of different types makes no sense.) 3. The collection of quantities obtained when each component of one tensor density (of type w k l) is multiplied by each component of another tensor density (of type

w  k  l ) is called a tensor product of the two densities, and is a tensor density of type w + w  k + k  l + l . For example, out of u and v one can form such tensor products as v v , v u , u u , v v v , v u v , v u v u v . The tensor product is denoted by ⊗, thus for example v u = v ⊗ u   . 4. If a tensor density does not change its value when two indices (either both upper or both lower) are interchanged, then it is called symmetric with respect to this pair of indices. If it only changes sign, then it is called antisymmetric in this pair of indices. The property of being symmetric or antisymmetric with respect to a given pair of indices is preserved under transformations of coordinates.

3.10 Mappings between manifolds

19

5. This last property allows us to define the symmetrisation and the antisymmetrisation. The symmetric part of a tensor density with respect to the indices 1     k  is the quantity  def 1 T1 k = T  (3.12) k! over all permutations i1 ik i1 ik

The antisymmetric part of a tensor density with respect to the indices 1     k  is the quantity  def 1 T 1 k  = sign of the permutation Ti i  (3.13) 1 k k! over all permutations i1 ik

One can carry out the symmetrisation or antisymmetrisation (i.e., respectively, symmetrise or antisymmetrise) also with respect to the upper indices, and, in each case, over only a subset of all the indices that a tensor density has. For example, a tensor of rank 4 T can be symmetrised over only two of its indices T  =

 1 T + T  2

or over three indices  1 T  = T + T + T + T + T + T  6 If we want to emphasise that a certain index is excluded from symmetrisation or antisymmetrisation, then we put it between vertical strokes. For example, the antisymmetrisation of T with respect to  and  only would be denoted T    . The symmetrisation and the antisymmetrisation with respect to just two indices are complementary operations, as can easily be verified, thus T  + T  ≡ T  However, this is no longer true for symmetrisations/antisymmetrisations over larger numbers of indices. The other parts of T that enter neither T  nor T  are obtained when different rules of assigning signs to the different terms in (3.12) and (3.13) are chosen. We will not encounter those operations in this book. If the antisymmetrisation is done with respect to a larger number of indices than the dimension of the manifold, then the result is a tensor density that identically equals zero. This is because, with n possible different values of each index, there must be at least one value that is repeated in a set of m > n indices. Then, each term in (3.13) has its counterpart that is identical, but enters the sum with an opposite sign. 3.10 Mappings between manifolds The following notation will be used. Mn and Pm are two arbitrary differentiable manifolds, dim Mn = n dim Pm = m x   = 1    n and ya  a = 1    m are the coordinate systems on Mn and Pm ,

20

Tensors, tensor densities

respectively. (Recall that several coordinate neighbourhoods may be needed to cover each manifold, but here we consider a single coordinate patch on each one.) F  Mn → Pm is an arbitrary mapping of class C1 , represented by the set of functions a y = F a x . Now consider a function f  Pm → R1 defined on Pm . For those points of Pm that are images of some points of Mn , the mapping F and the function f automatically define a function acting on Mn . Let Pm q = Fp , where p ∈ Mn , and let fq = r ∈ R1 . Then f  F p = r, and so f  F  Mn → R1 . We can thus say that the mapping F that takes points of Mn to points of Pm defines an associated mapping of functions on Pm to functions on Mn . This associated mapping will be denoted F0∗ . (The zero denotes that this is a mapping of functions, i.e. tensors with zero indices, and the asterisk placed as a superscript denotes that the functions are sent in the opposite direction to points of the manifold Mn . An associated mapping that sends objects backwards with respect to the main mapping is called a pullback.) The function associated to f will thus be denoted F0∗ f , so F0∗ f  Mn → R1 

def

F0∗ f p = fFp 

(3.14)

Now consider a contravariant continuous vector field v on Mn . This field defines a family of curves tangent to the vectors of this field by dx  (3.15) d Suppose that an arc of the curve x  is in the domain of the mapping F . Then points of this curve have their images in Pm  F x  , or, in terms of coordinates, ya  = F a x  . Hence, the arc of the image-curve in Pm is automatically parametrised by the same parameter . Since the functions x  are of class C1 (as integrals of continuous functions), and F is of the same class by assumption, we can differentiate the functions ya  by . The derivatives are components of the field of vectors wa tangent to the curve ya  . The mapping F thus defines an associated mapping of vector fields on Mn to vector fields on Pm : d F a dx F a wa Fx = (3.16) F a x =  =  v  d x d x If dim Pm < dim Mn , then some curves in Mn will be mapped onto single points of Pm , and then, according to (3.16), the image of the vector field v tangent to such a curve will be a zero vector on Pm (because the image of such a curve ya  , will in fact be independent of ). Note the similarity of (3.16) to the transformation law of contravariant vectors; we will come back to it at the end of this section. We have thus found that the mapping of manifolds F  Mn → Pm defines an associated mapping of vector fields on Mn to vector fields on Pm . We will denote this associated mapping F1∗ . (This time it is a mapping of tensors with one index, and it takes objects in the same direction as the main mapping. Such a mapping is sometimes called a pushforward.) If v is a vector field on Mn , then F1∗ v is a vector field on Pm . The mapping F1∗ is a linear mapping between vector spaces, determined via (3.16) by the matrix of derivatives F a  . v =

3.10 Mappings between manifolds

21

Vector fields v on Mn and wa on Pm can be uniquely represented by directional derivatives of functions. Let g  Mn → R1 and f  Pm → R1 , then g  x f def wa y ←→ wf = wa a  y def

v x ←→ vg = v

(3.17)

Then the mapping F1∗ can be defined in another, equivalent way, v F0∗ f = F1∗ v f 

(3.18)

where v is a vector field defined on Mn . A field of covariant vectors a on Pm can be understood as a linear form  that maps vector fields on Pm to R1 : def

w = a wa 

(3.19)

If a field of forms  is defined on Pm , then, for those points of Pm that are images of points of Mn , we can define a field of forms on Mn by F1∗  v = F1∗ v 

(3.20)

where v is a vector field on Mn . (This is an associated mapping of tensors with one index that is again a pullback.) In terms of coordinates, this can be written as follows: F1∗   v = a F a  v 

(3.21)

F1∗   = a F a  

(3.22)

or equivalently

Note the similarity of (3.22) to the transformation law of covariant vectors. To sum up: a mapping F  Mn → Pm between manifolds defines the mapping F1∗ of vector fields on Mn to vector fields on Pm and the mappings F0∗ and F1∗ of, respectively, functions and forms on Pm to functions and forms on Mn . These definitions can be extended further, in a rather obvious way, to mappings of contravariant tensor fields of arbitrary rank from Mn to Pm and of covariant tensor fields from Pm to Mn . Note that tensor densities can be defined only for nonsingular transformations, while F can be singular. Therefore, no general definition of an associated mapping of tensor densities can be given. If n = m and F is a diffeomorphism of class C1 , then F −1 exists and is also of class 1 C . In this case, tensors of arbitrary rank, including mixed tensors, can be transported in both directions between Mn and Pm . If F  Mn → Pm is not reversible, then mixed tensors cannot be transported in any direction. Now observe the following. Coordinate transformations are in fact nothing else than mappings of Rn into itself – because coordinate patches are subsets of Rn by definition. Hence, if such a mapping occurs within the image of a single map, a mapping of the manifold into itself is associated with it. Consequently, coordinate transformations can be interpreted as mappings of the underlying manifold into itself.

22

Tensors, tensor densities

Let us now specialise the considerations of this section to the case when n = m, and Mn and Pm are subsets of the same manifold, Mn ⊂ Qn and Pm ⊂ Qn . Then it follows from (3.14), (3.16), (3.22), and from their extensions to tensor fields of higher ranks, that the transformation laws of tensors are consistent with the interpretation of a coordinate transformation as a mapping of the manifold into itself. We shall make use of this analogy in Chapter 8.

3.11 The Levi-Civita symbol Let 1 n be a tensor density (whose weight is as yet unknown) defined on a differentiable manifold Mn , which is antisymmetric with respect to any pair of its indices. Because of the antisymmetry, each component that has at least a pair of identical indices will be equal to zero. Only those components can be different from zero for which the set 1     n  is a permutation of the set 1    n. For even permutations 1 n = 1n ; for odd permutations 1 n = −1n . Hence, defining the component 1n suffices to determine the whole tensor density 1 n . We thus define 1n = +1

(3.23)

The quantity 1 n is called the Levi-Civita symbol. Let A  be an arbitrary matrix. Let us investigate the quantity def

DA 1 n = 1 n A1 1    An n 

(3.24)

Let i label the columns and j the rows of the matrix. The expression above is a sum of n-tuple products of elements of the matrix A  . In each product, each factor comes from a different column (because, if two indices i and j are equal, then 1 n = 0). The ith factor in each product is always from the same (ith) row, but each time from a different column, and, in the whole sum, runs over all columns. For even permutations 1    n , the product enters the sum with a plus sign, for odd permutations – with a minus sign. The quantity (3.24) is also antisymmetric in all the i indices (see Exercise 1). Hence,

DA 1 n vanishes if any two indices i , j are equal (i.e. if the same row of the matrix A appears in the positions i j ). Thus DA 1 n has all the properties of the determinant of A. It will equal + detA when the permutation 1    n → 1     n  is even, and − detA when the permutation is odd. Hence 1 n A1 1    An n = 1 n detA 

(3.25)

Now let us apply this formula to the matrix of derivatives (the Jacobi matrix) x  of the coordinate transformation x → x . We have 1 n =

x 1 x 1    xn n 1 n  x

(3.26)

This shows that 1 n is a tensor density of type 1 0 n. By a similar method one can verify that 1 n is a tensor density of type −1 n 0.

3.12 Multidimensional Kronecker deltas

23

3.12 Multidimensional Kronecker deltas Let us recall the definition of the ordinary Kronecker delta symbol:  1 when  =    = 0 when  = 

(3.27)

(this is the unit matrix). This is a tensor, since, on the one hand   =  

(3.28)

by definition, and on the other hand 











= x  = x  x  = x  x    

which is the transformation law of a mixed tensor of rank 2. A multidimensional Kronecker delta is defined as follows: 1       1 1 k     1 k 1 k =         k        k  1 k

(3.29)

(3.30)

From the definition we have at once  

  

 

11 kk = 11kk =  11 kk  

(3.31)

and it follows that k must not be greater than the dimension of the manifold, n, or else   11 kk ≡ 0. Other than this, k is unrelated to n. Now let us consider the special case k = n. Since an object that is antisymmetric in all n indices has just one independent component, it must be proportional to the Levi-Civita symbol with the same indices. For the upper indices of the multidimensional delta we   thus have 11 nn = T1 n 1 n . But T1 n is antisymmetric in 1     n , so it must   be proportional to 1 n , thus 11 nn = 1 n 1 n . To calculate  it now suffices to substitute in the last formula any sets of indices for which both sides are nonzero. We substitute 1     n  = 1     n  = 1    n, and we see that  = 1. Hence, finally  

11 nn = 1 n 1 n 

(3.32)

This, in consequence of the properties of the Levi-Civita symbol, is a tensor (i.e. has the weight zero).   From (3.30) it follows that 11 kk = 0 only when 1     k  are all different and are a permutation of 1    k . If any pair of upper indices has equal values, or if any pair of lower indices has equal values, then the determinant in (3.30) has two identical rows or two identical columns and is zero. If any index i of the set 1    k  is different from all the s in 1     k , the determinant in (3.30) has only zeros in the ith column     and is zero again. If 11 kk = 0, then 11 kk = +1 when the lower indices are an even 1 k permutation of the upper ones, and 1 k = −1 when they are an odd permutation.

24

Tensors, tensor densities

Using these properties one can verify that   

 

11 kk  = n − k 11 kk 

(3.33)

This is seen as follows. If 1     k  are not a permutation of 1     k , or if any index in either of the two sets is repeated, then both sides of (3.33) are zero and the equation holds. When all 1     k  are different, while 1     k  are their   permutation, each term in the sum on the left-hand side is equal to 11 kk when  ∈ 1     k , and is zero when  ∈ 1     k . Consequently, there are n − k values of  with which there are nonzero contributions on the left-hand side, and each contribution is equal to the delta on the right.  The following equations are simple consequences of (3.33):  



 

n−1 1 n−1 11 n−1  = 1 n−1 

(3.34)

s 11  s = n − s + 1 n − s + 2    n =

n!  n − s !

n 11  n = n!

  



(3.35) (3.36)

 

k+1 n 1 k 11 kk k+1 n = n − k !1 k 

(3.37)

3.13 Examples of applications of the Levi-Civita symbol and of the multidimensional Kronecker delta The Levi-Civita symbols and the multidimensional deltas are useful in calculations with determinants or antisymmetrisations: they allow us to replace tricky reasonings with simple computational rules. With the help of (3.25), (3.32) and (3.36) we can verify that detA· · =

1 1 n 1  A 1    An n  n! 1 n

(3.38)

so the determinant of a mixed tensor is a scalar; detB·· =

1 1 n 1 n   B1 1    Bn n  n!

(3.39)

so the determinant of a doubly covariant tensor is a scalar density of weight −2; detC ·· =

1  C 1 1    C n n   n! 1 n 1 n

(3.40)

so the determinant of a doubly contravariant tensor is a scalar density of weight +2 . One can also verify that the antisymmetrisation with respect to any set of indices can be written as follows: 1 k T  (3.41) T 1 k  = 11 k! k 1 k and similarly for upper indices.

3.14 Exercises

25

3.14 Exercises 1. Verify that the quantity DA defined in (3.24) is antisymmetric with respect to the -indices. Hint. Interchange the names of any two s in the sum and then move the new s to their old positions by transposing the indices of  and interchanging the As in the product. 2. Prove that the cofactor of the element A  in a mixed tensor A   is given by the equation M  =

1 1 n−1 A1 1    An−1 n−1  n − 1 ! 1 n−1

(3.42)

3. Find the formulae for the cofactors of the elements B and C  in a doubly covariant and a doubly contravariant tensor, respectively. Note that the cofactor has in each case its indices positioned opposite to its corresponding element. 4. Find the formula for the coefficient of i in the characteristic equation for a matrix M   : det M   −   = 0 Prove that all the coefficients of this polynomial are scalars. Note the coefficients of 0 and of n−1 – what functions of the matrix are they?

4 Covariant derivatives

4.1 Differentiation of tensors Calculate the derivative of a contravariant vector field v after it has been transformed from the x-coordinates to the x -coordinates:       (4.1) v  = x  v  = x  x  v + x  x  v   

This is not a tensor field, in consequence of the term x  x  v . The same is true for most other tensor fields. There are only a few cases in which the derivatives of tensor fields are themselves tensor fields. One example is the derivative of a scalar field, which is a covariant vector field. Other examples are the following. 1. The derivatives of the Levi-Civita symbols and of all the Kronecker deltas are identically equal to zero, and hence are tensors. 2. If T1 k is a tensor field (of weight 0), then T1 k k+1 (a generalisation of rotation) is a tensor field, too. 3. If T 1 k is a tensor density field of weight −1, and is antisymmetric in all the indices, then T 1 k k (a generalisation of the divergence of a vector field) is also a tensor density field of weight −1. We will verify the third example. By assumption, when the coordinates are transformed from x to x , T 1 k transforms as follows:   −1

x   1 k T = x1 1    xk k T 1 k  (4.2)

x 

Let us differentiate this by xk and contract the result by k . In that term, in which the differentiation acts on the determinant  x / x −1 = x / x , we will develop the determinant according to (3.38). We have 



T 1 k k =

n 1   

1 n x1 1    xi i k    xn n n! i=1 1 n 



× x1 1    xk k T 1 k 26

4.1 Differentiation of tensors

27

+

 

x k−1   x 1 1    xi i k    xk k T 1 k

x i=1

+

x    x 1 1    xk−1 k−1 xk k k T 1 k 

x

+

x   x 1 1    xk k T 1 k  x k 

x

(4.3)

In the first term we recall that is antisymmetric with respect to both upper and lower indices, so interchanging simultaneously a pair of upper indices and a pair of lower indices does not change it. Hence, the products in the first term can be ordered so that the factor with the second derivative is contracted with the last indices of . After such an ordering we see that all the n components of the sum are identical, so first term =

1  

11 nn x1 1    xn−1 n−1 xn n k n − 1 ! 



× x1 1    xk k T 1 k 

(4.4) 



In the second term of (4.3), each component of the sum contains xi i k xk k = i x i k , which is symmetric in i  k . However, it is then contracted with respect to both i  k with the T 1 k , which is antisymmetric in these two indices. Such a contraction is always identically equal to zero, hence the second term is zero.  In the third term, we note that xk k is an element of the inverse matrix to x  .     Thus, xk k is equal to the cofactor of the element transposed to kk in the matrix    x  , divided by the determinant of x  . The element transposed to kk in x  is xk k , while det x  = x / x . Hence, using (3.42), we have

 

x −1 1 k 1 n−1  k n−1 1 x k k = (4.5)

   x 1    x n−1 k 

x n − 1 ! k 1 n−1 

We see at once that the differentiation of the factors xi i by xk will give zero contributions because the results of these differentiations, xi i k , are symmetric in i  k and will be contracted with the delta which is antisymmetric in the same indices. The only nonzero contribution will thus be from the derivative of the determinant, so     

x −2 1   k · · 11 nn x1 1    xn−1 n−1 xn n k x k k = − 

x n − 1 ! ×

1   n−1  x 1 1    xn−1 n−1 

kk 11n−1 n − 1 !

Note that the last line above is just





x  k x k 

x

(4.6)

28

Covariant derivatives

Using this we see that the third term in (4.3) has the same absolute value as the first one, but is of opposite sign. Hence, the first and third terms cancel each other, and the final result in (4.3) is the last term, which equals 



T 1 k k =

x   x 1 1    xk−1 k−1 T 1 k k 

x

(4.7)



where we have used xk k x k = x k =  k . Hence, T 1 k k is indeed a tensor density field of weight −1. The statement proved above also holds for the case when T  has just one index and is a contravariant vector density field. Then, the first and third terms still cancel each other while the second term in (4.3) simply does not exist. The fact that partial derivatives of tensor fields are not tensor fields themselves is unfortunate because the laws of physics are usually formulated as differential equations. We would like these equations to have the form (a tensor) = 0, since this would hold in all coordinate systems. This suggests the following idea: let us define a ‘generalised differentiation’, which will yield tensor fields when acting on tensor fields, and will coincide with ordinary differentiation when acting on scalars and the Kronecker deltas, for which partial derivatives are tensors. Then, we will replace the partial derivatives with the generalised derivatives in the basic equations. We guess that this generalised differentiation, called covariant differentiation, will reduce to ordinary differentiation in certain privileged coordinate systems.

4.2 Axioms of the covariant derivative We want the covariant differentiation to have all the algebraic properties of an ordinary differentiation, and in addition to yield tensor densities when acting on tensor densities. We will denote the covariant derivative by  or  or D/ x . The symbols Ti w k l will denote tensor densities whose explicit indices are irrelevant. Specifically, we want  to have the following properties: 1. To be distributive with respect to addition:  T1 w k l + T2 w k l =  T1 w k l +  T2 w k l 

(4.8)

2. To obey the Leibniz rule when acting on a tensor product:  T1 w1  k1  l1 ⊗ T2 w2  k2  l2 =  T1 w1  k1  l1 ⊗ T2 w2  k2  l2 + T1 w1  k1  l1 ⊗  T2 w2  k2  l2  (4.9) 3. To reduce to the partial derivative when acting on a scalar field:   =  

(4.10)

4. To yield zero when acting on the Levi-Civita symbols and Kronecker deltas:  1 n = 0

 1 n = 0

   = 0

(4.11)

4.3 Basis of vector fields

29

The last equation implies at once that  

 11 kk = 0

(4.12)

for any k. It also implies that  commutes with contraction. 5. When acting on a tensor density field of type w k l , it should produce a tensor density field of type w k l + 1 , thus  T1 w k l = T2 w k l + 1  Only the last property does not hold for partial derivatives. From these postulated properties we will now derive an operational formula for the covariant derivative.

4.3 A field of bases on a manifold and scalar components of tensors In every tangent space to an n-dimensional manifold Mn we can choose a set of n linearly independent contravariant vectors, e1      en  . The indices a b c    = 1    n will label vectors (while Greek indices label coordinate components of tensors). After such a basis is chosen at every x ∈ Mn , we consider the set of n vector fields: x → ea  x 

a = 1    n

The collection of quantities ea  x    = 1    n a = 1    n forms a matrix whose elements are functions on the manifold. Since all the vectors are linearly independent at every x, the matrix is non-singular, so there exists an inverse matrix ea  that obeys ea  ea  =  

(4.13)

A subset of the matrix ea   defined by a fixed a is then a covariant vector field. The set of fields corresponding to all values of a forms a dual basis to ea  x , a = 1    n. By virtue of the ea  x  being linearly independent, Eq. (4.13) implies the following: e a  eb  = a b  For any tensor field (of weight 0) a a Tb11blk

  T11lk ,

(4.14)

the collection of quantities  

= ea1 1    eak keb1 1    ebl l T11lk 

(4.15)

labelled by the indices a1     ak  b1     bl = 1    n, is a set of nk+l scalar fields that   uniquely represents the set of nk+l coordinate components of the tensor field T11lk . This is so because, in consequence of (4.13) and (4.14), an inverse formula to (4.15) exists   a a that allows one to calculate T11lk when Tb11blk are given:  

a a

T11lk = ea1 1    eak keb1 1    ebl l Tb11blk 

(4.16)

Let us denote e = detea   =

1 a1 an 1 nea1 1    ean n  n!

(4.17)

30

Covariant derivatives

Now, 1 n is a tensor density of weight +1, whereas a1 an is a set of scalars because it depends only on the basis in the vector space, and not on the coordinate system. Hence, e is a scalar density of weight +1. The quantity e, together with ea   and ea  , can be used to represent tensor density   fields by sets of scalar fields. Let T11lk now be a tensor density field of type w k l ; then each element of the set Tb11blk = e−wea1 1    eak keb1 1    ebl l T11lk a a

 

a a Tb11blk +w

is a scalar field. The set to (4.16), with the factor e information.

(4.18)

  T11lk

then uniquely defines via a formula analogous added. The weight w has to be given as an extra bit of

4.4 The affine connection We now define the set of quantities

     = −es   −  es  

(4.19)

The elements of this set are called the coefficients of affine connection. When specified explicitly, they tell us how the covariant derivative acts on the basis vector fields. Later we will consider manifolds in which these coefficients can be calculated from more basic objects (see Chapter 7). For now, we consider manifolds in which the    are just given. The    do not depend on the choice of basis. Let us assume that ea   and ea   are two different bases. The vector fields of the second basis can then be decomposed in the first basis ea  = Ab a eb  

(4.20)

and then the elements of the transformation matrix Ab a = eb  ea  (4.21)       c c are scalar fields. Hence, Ab a  = Ab a  and A−1 d = A−1 d . Then, calculating the    in the basis ea  , we have   s      e = −Ar s er   −  A−1 s es      (4.22) = − r s er   −  es  =    e  Now let us note that the    are not tensor fields. When coordinates are transformed, these coefficients change as follows: 





     = x  x  x      + x  x    

(4.23)

However, the antisymmetric part def

  =    is a tensor, since x    = 0. It is called the torsion tensor.

(4.24)

4.5 The explicit formula for the covariant derivative

31

4.5 The explicit formula for the covariant derivative of tensor density fields In order to obtain an explicit formula for the covariant derivative, we need to know two other properties of the connection coefficients: I II

     = es   −  es  

(4.25)

 ew = wew−1  e

(4.26)

The verification of (I) is easy. To verify (II), consider the quantity def

F w = e−w  ew 

(4.27)

Using the postulated properties of the covariant derivative, we obtain F w1 + w2 = F w1 + F w2 

(4.28)

Every continuous function that has the property f w1 + w2 = f w1 + f w2 for all real w1 and w2 also has the property fw = f1 w. Hence e−w  ew = we−1  e, which is equivalent to (4.26). Equation (4.26) holds also for partial derivatives, so      e−w  −  ew = we−1  −  e

(4.29)

Now, using Eqs. (3.38) and (3.42), we obtain     −  e = eean n  −  ean n = e   



(4.30)

At this point, we can derive the formula for the covariant derivative of an arbitrary tensor density field. Let us convert the tensor density field to the set of scalar fields given by (4.18). Axiom 3 implies then 

 a a  −  Tb11blk = 0

(4.31)

On the other hand, using (4.18) and axiom 2, we obtain   a a    −  Tb11blk = − we−w    ea1 1    eak k eb1 1    ebl l T11lk + e−w

k 

    ea1 1     −  eai i    eak k eb1 1    ebl l T11lk

i=1

+ e−w

l  j=1

    ea1 1    eak k eb1 1     −  ebj    ebl l T11lk j





+ e−w ea1 1    eak k eb1 1    ebl l  −  T11lk   

(4.32)

32

Covariant derivatives

Now we convert this back to coordinate components, by contracting it with ewea1 1    eak k eb1 1    ebl l and using Eqs. (4.19) and (4.25):  

0 = w   T11lk −

k 

  k

 i i  T11li

+

i=1

l 

 

 j j  T11jkl

j=1

    +  −  T11lk 

(4.33)

From this, finally  

 

 

 T11lk =  T11lk + w   T11lk +

k 

  k

 i i  T11li

i=1

−

l 

 

 j j  T11jkl 

(4.34)

j=1

The following special cases of (4.34) occur frequently: A  = A  +    A 

(4.35)

a = a −    a 

(4.36)

T   = T   +    T  +    T  

(4.37)

T = T −    T −    T 

(4.38)

T

=T

 

 

+



 T  −   T   





(4.39)

Note that, unlike the partial derivative, the covariant derivative does not act on single components of tensor densities. It is an operator that acts on the whole tensor density and produces another tensor density.

4.6 Exercises 1. What is the condition for the ‘covariant rotation’ T of a covariant vector field T to coincide with the ordinary rotation T ?

2. Let g = g be a doubly covariant tensor that is nonsingular, i.e. det g = 0. Let g  be its inverse matrix, i.e. g  g =   Show that the object defined as 

   1  = g  g + g − g 2 

transforms under coordinate transformations by the same law as the coefficients of affine connection. What is the torsion in this case? 3. Verify that (4.28) implies F w = wF 1 .

5 Parallel transport and geodesic lines

5.1 Parallel transport Let a curve C be given in a manifold with affine connection, and let v be a field of vectors along the curve, C  x → v x. In a Euclidean space, in Cartesian coordinates, the vectors vx are parallel when v dx dv =  = 0 d x d

(5.1)

where  is a parameter along C, while x  are coordinates of a point on C. Then, for two points on C corresponding to 1 and 2 , v 1 =v 2  ∗

(5.2)

(the asterisk means that the equation holds only in some coordinate systems; for example, (5.2) does not hold in polar coordinates on a plane). We will generalise the definition of parallelism so that it does not depend on the coordinates. The following definition suggests itself: Dv def    dx

= v = 0 (5.3) d d which is at the same time the definition of a covariant derivative along a curve. Using (4.35), we obtain from this v  



dx

 dx v + 

= 0 d d

(5.4)

This can be written equivalently as dx

dv = −  v

d d

(5.5)

Thus, the vector v 1 , while being parallely transported from the point x 1  to the point x 2 , changes in the following way: v 2  = v 1  −



x2 

x1 

33

 

xv xdx

(5.6)

34

Parallel transport and geodesic lines

The expression under the integral may not be a perfect differential. Then, the result of integration will depend on the curve C. Thus, in general, for the parallel transport so defined the result depends on the path of transport, and for parallel transport along a closed curve  dx

def  v  d = v 1  (5.7) v 1  = v 1  − 

d C

The conditions under which parallel transport is independent of the path, i.e. under which (5.7) does not occur, will be given in Section 6.3. 

 The parallel transport of an arbitrary tensor density field T11

lk is defined analogously to (5.3):

D 1

k 

 dx T1

l = T11

lk

= 0 (5.8) D d

5.2 Geodesic lines A geodesic line is a curve G whose tangent vector v = dx /d, after being parallely transported along it from x ∈ G to x  ∈ G, is collinear with the tangent vector that is defined at x. Hence  (5.9) v  → = v  0

or, according to (5.6),  v 

0 →

= v 0  −





G

 0 

ttv tv tdt = v 

(5.10)

An example is a straight line in a Euclidean space. In that case, the integral in (5.10) is zero and, if the length of arc is chosen as the parameter ,  = 1. A geodesic line is a generalisation of the notion of a straight line to any manifold with affine connection. Let us differentiate (5.10) by . Since v = dx /d, the result is   2  d dx dx dx

dx  = −

(5.11) +   

d 2 d d d d Now let us change the parameter as follows:  def  → s =



0

c dt t

(5.12)

where c and 0 are arbitrary constants. Then, Eq. (5.11) becomes d 2 x dx dx

 +  s = 0

ds2 ds ds or, equivalently, D Ds



dx ds

(5.13)

 = 0

(5.14)

5.3 Exercises

35

The form (5.13) of the geodesic equation is privileged in that, in the parametrisation (5.12), the tangent vector transported parallely along the geodesic is not only collinear with the locally defined tangent vector, but coincides with it. The parameter s that has this property exists for any  such that  = 0 for every , and it is called the affine parameter. It is defined up to the linear transformations s = as + b

a b = constant

(5.15)

Equation (5.13) allows us to prove the following theorem: Theorem 5.1 In a manifold Mn with an affine connection, for every point x and for every vector v tangent to Mn at x, there exists a geodesic line passing through x that is tangent to v. This is so because a solution of a second-order differential equation is uniquely determined by its value at one point and its first derivative at that point. However, two points of a manifold with affine connection cannot always be connected by one and only one geodesic. A geodesic joining two points may not exist in a nonconnected manifold, like a two-sheeted hyperboloid. On the other hand, any two points on the surface of a cylinder (where the geodesic lines are straight lines, circles and screwlines) can be connected by an infinite number of geodesics. (Just imagine a screw-line that connects two points p and q by the shortest arc, then another one that runs one extra time around the cylinder between p and q, then another one that runs two times around the cylinder, and so on.) Note that only the symmetric part of the connection gives a nonzero contribution to the geodesic equation.

5.3 Exercises 1. Consider a vector on a Euclidean plane being transported parallely along a straight line. Find how its components change when they are given in polar coordinates. 2. Do the same for a vector in a 3-dimensional Euclidean space when its components are given in spherical coordinates. From the result, read out the connection coefficients of the Euclidean space in spherical coordinates.

6 The curvature of a manifold; flat manifolds

6.1 The commutator of second covariant derivatives The covariant derivative was introduced in order that derivatives of tensor densities are still tensor densities. This advantage has a few inconvenient consequences. One of these we already know: parallel transport defined via covariant differentiation depends on the path. Another one will appear now: the second covariant derivatives do not commute. For a proper scalar field (with weight w = 0) we have     (6.1)   −   T =  T −  T  = −2  T

Hence, the second covariant derivatives of a scalar field commute only in torsion-free manifolds. For a scalar density field of weight w we have       −   Tˇ =  Tˇ  + w   Tˇ −    Tˇ   −  Tˇ  −w   Tˇ +    Tˇ   = w   −   Tˇ − 2   Tˇ

(6.2) Let us leave this formula without comment for a while and let us note the analogous result for a covariant vector field:       −   T = −   −   T   +     −     T − 2  T 

(6.3) Now let us define def

B  = −    +    +      −      ≡ −2   + 2     

(6.4)

The quantity B  is called the curvature tensor. In order to see that it is indeed a tensor, note that the left-hand side of (6.3) is a tensor by definition. The quantities   and T  are tensors, too, hence the last term on the right-hand side is a tensor. It follows 36

6.1 The commutator of second covariant derivatives

37

that B  T is a tensor. Now, since T is an arbitrary covariant vector, B  must be a tensor itself. (This can also be verified using (6.4) and (4.23).) Now let us observe that B  = −  +  

(6.5)

Hence, Eq. (6.2) can be rewritten as follows    −   Tˇ = −wB  Tˇ − 2  Tˇ 



(6.6)

Thus, the same curvature tensor determines also the commutator of the covariant derivatives of a scalar density field. Finally, for the commutator acting on a contravariant vector field 

   −   T  = −B  T − 2  T  

(6.7)

It can be verified that the commutator of covariant derivatives acts on the tensor product of two tensor density fields in the following way:     −   T1 ⊗ T2        =   −   T1 ⊗ T2 + T1 ⊗   −   T2

(6.8)

(the weights and indices of T1 and T2 are irrelevant here). Thus, the operator (  −  ) has the property of an ordinary differentiation. Then, an arbitrary tensor density field of type w k l behaves under covariant differentiation like a tensor product of a single scalar density of weight w k contravariant vectors and l covariant vectors – see (4.34). Hence, we can guess the formula for the commutator of second covariant derivatives acting on an arbitrary tensor density field: 

k   

 

 



   −   T 11

lk = −wB  T 11

lk − Bi i  T 11

li k i=1

+

l 









B j j  T 11

jk

l − 2  T 11

lk

(6.9)

j=1 



(This can be formally derived by projecting T 11

lk on the basis fields and calculating the commutator for the projection in two ways.) Equation (6.9) is called the Ricci formula. Let us note, from (6.4), that B  = B 

(6.10)

We will see in Section 7.9 that the name ‘curvature tensor’ evokes the right associations.

38

The curvature of a manifold; flat manifolds

6.2 The commutator of directional covariant derivatives Let k and l be two linearly independent contravariant vector fields determined on a manifold with affine connection, Mn . Let us calculate, for an arbitrary tensor density field, the commutator of second directional covariant derivatives along k and l, thus     

 def 

 

 k  l  T 11

lk = k  l  T 11

lk − l  k  T 11

lk   

 

 = k l  −l k  T 11

lk − 2k l   T 11

lk   

 + k l   −   T 11

lk

(6.11)

The quantity def

k l = k l  −l k 

(6.12)

is called the commutator of k and l. It is a tensor field, since k l ≡ k l  − l k  − 2  k l

(6.13)

The second term in the last part of Eq. (6.11) cancels the term with torsion that will appear from (6.9). In the end, we obtain 











k  l  T 11

lk = k l T 11

lk − wB  k l T 11

lk −

k 





k

Bi i  k l T 11

li

+

l 





B j j  k l T 11

jk

l

(6.14)

j=1

i=1

Suppose in addition that k l = 0. This is a necessary and sufficient condition for the existence of coordinates adapted simultaneously to both k and l, call them  a and  b : k =

x   a

l =

x   b

(6.15)

so that, if  a and  b are chosen as two of the coordinates, then, with x 1 =  a and x 2 =  b , we have k  = 1  l  = 2 . (For the proof see Exercise 2.) For such fields, (6.14) simplifies further to 

 

 x x 

 a  b T 11

lk = −wB  b a T 11

lk  

k l   x x 1

i

k 1

k i j + b a − B i  T 1

l + B j  T 1

j

l

  i=1 j=1

(6.16)

6.3 The relation between curvature and parallel transport

39

6.3 The relation between curvature and parallel transport 



By definition, a tensor density field T 11

lk is parallely transported along a curve x  when (5.8) holds. This is a linear homogeneous set of first-order differential equations 

 with respect to the functions T 11

lk . As is well known, the solutions of such equations 

 are linear functions of the initial conditions. Let the initial values of T 11

lk  be given at  = 0. Then the solution of (5.8) can be represented as 







1

l 1

k 1

l T 1

l 0

T 11

lk  = P11

kk 







(6.17) 



where P11

kk 11

ll  is a linear operator that maps the initial value T 1

k 0 into the 1 l 

 running value T 11

lk . It has two sets of indices, those with a bar correspond to the initial point x 0, those without a bar correspond to the running point x . We will call it the propagator of parallel transport. It depends on the two points and, apart from exceptional cases, on the curve along which the transport occurs. It transforms like 

 a tensor density at the point x , with the indices 11

lk , multiplied in the sense of a 

 tensor product by a tensor density at the point x 0, with the indices 1

k . Such an 1 l object is called a bi-tensor. In consequence of (5.8), the parallel propagator must obey D 1

k P d 1

k

1

l 1

l 

= 0

(6.18)

and, in consequence of (6.17), it must obey the initial condition 



1

l 1

l 0

P11

kk









= 11 kk  11  ll

(6.19)

In Eq. (6.18), the covariant differentiation applies only to the indices without a bar because the initial point does not depend on . We will give a special name to the propagator of parallel transport along a closed curve. Let 0 ≤  ≤ 1 be a parameter on a closed curve and let x 0 = x 1 be its beginning–end point. We denote 



P11

kk

1

l 1

l 1





= S11

kk

1

l 1

l

(6.20)









In the symbol S



all the indices refer to the point x 0 = x 1, hence S



is an ordinary tensor density field of type w k + l k + l. Now let us define elementary propagators: Pw , to transport scalar densities, P , to transport contravariant vectors, and P , to transport covariant vectors. All of them obey (6.18) and the initial conditions

Pw 0 = 1

P 0 =  

P 0 = 

(6.21)

The following equation holds: 



P11

kk

1

l 1

l









= Pw P11 Pkk P 11 P ll

(6.22)

(because both its sides obey the same set of differential equations (6.18) and the same set of initial conditions (6.19)).

40

The curvature of a manifold; flat manifolds





Similarly, the general propagator of transport along a closed curve, S



, is just the tensor product of elementary propagators 



S11

kk

1

l 1

l









= Sw S11 Skk S 11 S ll

(6.23)

Hence, in order to investigate the properties of general propagators, it suffices to deal with the elementary propagators. Let us consider parallel transport along a curve x  from the point x 0 to an arbitrary point x , of the following scalar field: V W   ≡ P P  V 0W 0

(6.24)

Let us take, for the beginning, the special case when the above scalar is constant along the whole curve. Then V W   = V 0W  0 =  V 0W 0

Comparing this with the previous equation, we see that   P P   −  V 0W 0 = 0

(6.25)

(6.26)

However, the vectors V 0 and W 0 are arbitrary, so P  P  = 

(6.27)

Now let us contract this equation with P V 0. The result is     P P −   P  V 0 = P P −   V  = 0

(6.28)

Since V  is an arbitrary vector, we have as a consequence P  P = 

(6.29)

Equations (6.27) and (6.29) show that the operators P and P are inverse to each other: P is not only the propagator of parallel transport of a contravariant vector from x 0 to x , but at the same time also the propagator of parallel transport of a covariant vector from x  to x 0 along the same curve. A similar duality exists for P . In consequence of (6.27) and (6.29), the following also hold: S  S =  

S  S = 

(6.30)

Therefore we shall consider only the propagators Pw  Sw  P  and S  , because P  and S  are algebraically determined by the first four.

6.3 The relation between curvature and parallel transport

41

Equation (6.18) for Pw  becomes dx dPw + w P = 0

d d w

(6.31)

With the initial condition Pw 0 = 1, this has the following solution: 

 dx tdt

Pw  = exp −w 0  t dt C Hence

  xdx

Sw = exp −w 

(6.32)

(6.33)

C

Now let us assume that the loop C can be contracted to a point (this assumption will be made in all that follows). Then we can use the Stokes theorem and express the integral along C through the integral over an arbitrary 2-surface leaf SC spanned on C:  1  xdx = −   dx ∧ dx = B dx ∧ dx

(6.34) 2 SC  C SC Hence, in (6.33)

 1 B  d2 x  Sw = exp − w 2 SC

(6.35)

where d2 x denotes the surface element dx ∧ dx . To solve (6.18) for P , we span a 2-surface leaf SC on the loop C, and then we embed C in a one-parameter family of loops C so that C0 = x 0 = x 1 is the single initial/final point of C, and C1 ≡ C (see Fig. 6.1). Points on SC will be labelled by  and , in such a way that x 0  = x 1  and x 1  0 = x 2  0 for all 1 and 2 .

ε=0

ε=1

Fig. 6.1. Embedding a loop in a one-parameter family of loops. The thicker line is the loop along which we consider the parallel transport. It corresponds to the parameter value  = 1. As  goes down to 0 through all the values in [0, 1], the loop becomes shorter and, in the limit  → 0, degenerates to the single point where all the loops are tangent. The loops in this figure are ellipses given by the parametric equations x = a1 − cos2t y = b sin2t.

42

The curvature of a manifold; flat manifolds

Then, the surface element under the integral is

   x x x x   dx ∧ dx = − d d    

(6.36)

so, for an arbitrary function F , SC

F dx ∧ dx =





1

d 0

0

1

   x x x x −

d F     

(6.37)

Along each loop C the propagator P   is defined by the equation D P   ≡ 0  

(6.38)

P 0  ≡ 

(6.39)

S  = P 1 

(6.40)

with the initial condition 

We also have

(note that S in general depends on the curve, i.e. is a function of ). On the leaf SC we can consider also the covariant derivatives by the parameter  (i.e. along the curves given by  = constant). We have d D S  = S   d

(6.41)

because under a transformation of the parameter  the propagator S  transforms like a scalar (by substitution only). Now let us use (6.16) to calculate the commutator of the second covariant derivatives by  and  acting on the propagator P  : 

D D D D x x P  

(6.42) − P   = B        But the second term on the left-hand side is zero by virtue of (6.38). Knowing this, we contract (6.42) with P . Using (6.38) again, we obtain 

D D x x P   P   = B P  P  

(6.43)      The expression in parentheses on the left-hand side is a scalar with respect to the nonbarred indices. For covariant differentiation with respect to  those quantities that carry only barred indices are scalars (the barred indices refer to the initial points of curves, where  ≡ 0). Hence, the covariant derivative by  on the left-hand side of (6.43) reduces to the partial derivative by . Then, we integrate the resulting equation by  from 0 to 1,

6.4 Covariantly constant fields of vector bases

43

we make use of (6.39), of the covariant constancy of  (axiom 4 of the covariant derivative) and of (6.40). The result is  1 x x D d (6.44) B P  P  

S  S  =     0 Now we contract both sides of the above equation with S , we make use of (6.41) and integrate the result by  from 0 to 1, obtaining 1  1 x x d d B P  P  S  S −   =    0 0 1 = B P  P  S d2 x

(6.45) 2 SC  Now it is seen that, if B  = 0, then S =   – the parallel transport of an arbitrary covariant vector along an arbitrary loop that can be contracted to a point reproduces the initial vector. In consequence of (6.30), the same is true for an arbitrary contravariant vector and, in consequence of (6.35), for any scalar density. Then, in consequence of (6.23), with B  = 0, any tensor density will return to its initial value when transported around any loop that can be contracted to a point. The converse theorem also holds: if the parallel transport reproduces the initial tensor density for every closed loop that can be contracted to a point, then B  = 0. This is because the integral in (6.45) is then zero for any arbitrary surface leaf SC . We have thus Theorem 6.1 Parallel transport along any closed loop that can be contracted to a point reproduces the initial value of every tensor density if and only if the curvature tensor is zero. This is at the same time a necessary and sufficient condition for the parallel transport to be independent of the path. The manifolds for which B  = 0 are called flat.

6.4 Covariantly constant fields of vector bases Suppose that a set of n vector fields exists on a manifold Mn such that at every point of Mn the vectors defined by these fields are linearly independent, and, moreover, all the fields are covariantly constant: e a ≡ 0, a = 1  n. Then we have a

0=e



 a − e a

= B  e a

(6.46)

Contracting both sides of this with ea we obtain B  = 0 – the necessary condition for the existence of such a field of bases. We will show that this is a sufficient condition, too. Assume that B  = 0. Then the result of parallel transport does not depend on the path. Hence, with a fixed initial point and fixed initial data at that point, this is a well-defined operation with a unique result at any other point of the manifold. Choose

44

The curvature of a manifold; flat manifolds

then an arbitrary point x0 ∈ Mn , and in the tangent space to Mn at x0 choose an arbitrary basis of vectors e a x0 . Then define bases in spaces tangent to Mn at other points as sets of vectors obtained from e a x0  by parallel transport. Such a set of vector fields will be covariantly constant on Mn . The field of bases ea  , dual to e a , is then also covariantly constant. Choosing such bases to calculate the connection coefficients we obtain    = es  es  = −es es 

(6.47)

6.5 A torsion-free flat manifold If a manifold is not only flat, but also torsion-free, then, for a covariantly constant field of bases, we obtain from (6.47):   (6.48) 0 = −es  es  − es 

Contracting this with ea  we obtain ea  −ea  ≡ 0. This equation implies that, in a neigha

bourhood of every point of the manifold, a set of scalar functions a x exists such that a indepenea = a  , a = 1  n. Since we assumed that the vectors  linearly  1   1 e  are a n dent at every point, i.e. det e   = 0, this now implies      / x   xn = 0. This means that the connection between the functions a a=1

n and the coordinates x  is unique and thus reversible, so the functions a  can be chosen as new coordi   nates. Then, let x x =  x. In these coordinates, ea  = a  = a / = a  and     ea  =  /a =  a . Hence, in (6.47) we have      = 0. In a flat torsion-free manifold one can thus choose such coordinates in which the connection coefficients are zero. In these coordinates, the covariant derivatives reduce to ordinary partial derivatives; we shall call these coordinates Cartesian. A special case (but not the only one) of a flat torsion-free manifold is a Euclidean space (of any dimension). 6.6 Parallel transport in a flat manifold Since the parallel transport in a flat manifold does not depend on the path, the propagators of parallel transport are functions that depend only on the initial point x and on the final point x, but not on the that is chosen to join x to x. For covariantly constant fields   curve of bases eA   and eA  we then have   ex w  P   = eS  xeS  x P = eS xeS x

(6.49) Pw = ex These equations follow because their right-hand sides obey the differential equations for propagators and the corresponding initial conditions. If the manifold is torsion-free in addition, then eA  are gradients of scalar functions. Choosing these functions as new coordinates we obtain Pw x x = 1

P   =   

P = 

(6.50)

6.7 Geodesic deviation

45

Thus, in a flat torsion-free manifold, in Cartesian coordinates, a vector that is transported parallely has the same components at every point and the point to which the vector is attached becomes irrelevant.

6.7 Geodesic deviation As we will see in Section 12.3, the inertial forces that act on a body moving along a geodesic exactly cancel the gravitational forces. On the other hand, the geodesic lines are the only curves privileged by the geometry of a manifold with connection, hence only they can be used as a privileged reference system. Since a gravitational field cannot be detected on a geodesic, one can only observe neighbouring geodesics from the given one and draw conclusions about the gravitational field on the basis of those observations. The vector field of geodesic deviation is a measure of the position of a particle on a neighbouring geodesic with respect to a particle on a given geodesic. Let U ⊂ Mn be an open subset of the manifold Mn with connection. Choose in U a one-parameter family of geodesics labelled by the parameter . Let  = 0 correspond to that geodesic from which we will be observing the neighbourhood. Every point on any of the geodesics of the family may be identified by the values of the parameter  (whose value identifies the geodesic) and the affine parameter s on that geodesic, x U = x s . The geodesic deviation is the vector field   def x   x s = (6.51)  =0 defined along our geodesic  = 0. We shall find how the deviation changes as we move down this geodesic. Since the set x s  with fixed  and changing s is a geodesic, the following is true:  D x  = 0

(6.52) ds s =const Then, from (5.8),



D D D D − ds d d ds

x x x x = B 

s s s 

(6.53)

But, by virtue of (6.52), the second term on the left-hand side is zero. Now note that x x  2 x D x = +   d s  s s  x x x x  2 x +   + 2 s   s s 

D x x x = + 2

ds  s 

=

(6.54)

46

The curvature of a manifold; flat manifolds

Making use of (6.54) in (6.52) we obtain 

x D x x x x D2 x  + 2  = B 

2 ds  s ds  s s 

(6.55)

Denoting k = x /s (the vector field tangent to the geodesic) and x as in (6.51), then substituting  = 0 in the above, we finally obtain  D  D2  x + 2k (6.56)  x − B  k k x = 0

2 ds ds This is the geodesic deviation equation. It is useful in experimental tests of general relativity, since it allows one (in principle – in practice this is difficult) to calculate the curvature by measuring relative displacements of bodies moving along neighbouring geodesics. In a flat torsion-free manifold and in the Cartesian coordinates, Eq. (6.56) simplifies to d2 x  /ds2 = 0, so its solution is x = A s + B , where A and B are constant vectors. From (6.51) then, the position of the point under observation, x s 0 , relative to the corresponding point x s 0 of the geodesic  = 0 is given by x s 0  = x s 0 + 0 x

(6.57)

Hence, in a flat torsion-free manifold two neighbouring geodesics either diverge or converge with a constant velocity, or remain parallel (when A = 0). In curved manifolds and in manifolds with torsion, solutions of the geodesic deviation equation are more complicated. (Actually, it is rarely possible to find the solution explicitly. Usually, solutions are found numerically or by perturbations.) Note that the form of (6.54) does not change when the parameter  is transformed by  =  . The derivatives d /d are constant along geodesics (because  itself is constant), hence the factor d /d will cancel in (6.56). Changing the parametrisation means merely choosing a different basis in the space of solutions of Eq. (6.56).

6.8 Algebraic and differential identities obeyed by the curvature tensor The curvature tensor obeys two other important sets of identities, in addition to (6.10). Let us calculate  1 1    B   =     −2    + 2        B  = 3! 3!  1   1       =   −  +       =    −  +     3 3  1   =   −  +     −      −      +     

3 (6.58) (We used the fact that in the contraction over three indices with the antisymmetric    the antisymmetrisation with respect to  occurs automatically, and we expressed the

6.9 Exercises

47

partial derivative of  through the corresponding covariant derivative.) Now let us note that the last term is equal to the second with an opposite sign. Thus  1     −  − 2    3 = −2   − 4   

B   =

(6.59)

The curvature tensor obeys also the following set of differential identities: B  = −2  B   

(6.60)

called the Bianchi identities. For their derivation see Exercise 3. Recall that the curvature tensor arose by calculating the commutator of covariant derivatives. Commutators of linear operators obey the well-known Jacobi identity. The Bianchi identities arise from the commutators of covariant derivatives in the same way as the Jacobi identity arises from commutators of linear operators. The Bianchi identities are important for the physical interpretation of relativity. They ensure that equations of motion of material media follow from the field equations and need not be postulated separately.

6.9 Exercises 1. Observe that coordinates can always be adapted to one vector field k so that, in the new coordinates, k =  1 . 2. Using the result of the previous exercise show that coordinates can be simultaneously adapted to two vector fields k and l so that k  = 1 and l  = 2 if and only if the two vector fields commute, k l = 0. It follows that, if i vector fields all commute, then coordinates can be adapted simultaneously to all of them. Hint. To show that this is sufficient, adapt the coordinates to k , then find the transformations of coordinates that preserve the property k  = 1 , and, using only these transformations, try to adapt the coordinates to l . 3. Derive the Bianchi identities (6.60). Hint. Use Kronecker 3-deltas to calculate antisymmetrisations, in the same way in which they were used in deriving (6.59).

7 Riemannian geometry

The most detailed sources for the subject of this chapter are Eisenhart (1940), a thorough presentation of differential geometry of curves and 2-dimensional surfaces in a Euclidean space, and Eisenhart (1964), a textbook on Riemannian geometry in n dimensions.

7.1 The metric tensor Up to here, we have dealt with manifolds on which the only additional object were the affine connection coefficients. That structure allowed us to define the parallel transport and thereby to compare directions of vectors attached to different points. However, we could not calculate distances between points or angles between vectors. Now we will add a new object that will allow for that – a symmetric second-rank covariant tensor, g = g , called the metric tensor. Using it, we can define the metric form, also called the metric: ds2 = g dx dx 

(7.1)

This expression (a scalar) in fact makes sense only under an integral. The length of arc of a curve x  between the points x 0  and x 1  is l0 1 =



1 0

ds =



1 0

    1/2  g  dx dx  d  d d 

(7.2)

However, (7.1) is a convenient shorthand notation. (We take the absolute value above because the form need not be positive-definite. We will explain later the meaning of g dx dx ≤ 0.) An example of a manifold with a metric tensor is a Euclidean space (of arbitrary dimension). Its metric tensor in rectangular Cartesian coordinates is the unit matrix, and its metric form is  2  2 (7.3) ds2 = dx1 + dx2 + · · · + dxn 2 

48

7.3 The signature of a metric, degenerate metrics

49

7.2 Riemann spaces It is logical to require that a vector k 0  (attached to the point on the curve x  given by  = 0 ), when parallely transported along that curve in the affine parametrisation, preserve its length. What condition does such a requirement impose on the metric tensor? Let  = s be an affine parameter. The length of the vector k s, parallely transported along the curve x , will not change when 0=

 D  Dg   d  k k g k k = g k k = ds ds ds

(7.4)

(see (5.3)). If this equation is to hold for every vector field k , then Dg dx = g  ds ds  Now, this should hold for every curve, which implies in the end 0=

(7.5)

g = 0

(7.6)

g  −   g −   g = 0

(7.7)

or, explicitly,

Those manifolds, on which a metric tensor obeying (7.6) is defined, and on which in addition   = 0 =⇒   =   

(7.8)

are called Riemann spaces. For brevity, we shall use the same name also for those manifolds on which the metric tensor is not positive-definite, although this does not agree with the habit of mathematicians. In mathematics, those manifolds for which g is not positive-definite are called pseudo-Riemannian in general, and sometimes have special names, e.g. the metric used in relativity (both special and general) is called Lorentzian. We prefer the name ‘Riemann’ or ‘Riemannian’ because the statements we will make apply to the proper Riemannian as well as to pseudo-Riemannian geometries. In order to be perfectly precise, we would thus have to say ‘Riemannian and pseudo-Riemannian’ every time. The Riemann spaces are the mathematical basis of relativity. Manifolds with a metric tensor and with torsion are sometimes considered. However, torsion could not so far be connected with any observable effects. Since this exposition is concentrated on the physical aspects of relativity, we shall always keep the assumption (7.8).

7.3 The signature of a metric, degenerate metrics The expressions g dx dx and g k k are quadratic forms. A coordinate transformation     x → x  changes the form g k kto g k k , where k = x k and  g  =     x  x  g . Let X denote the matrix x  , let g denote the matrix g  and let k denote the vector k . In the terminology of quadratic forms, the transition k → k = Xk,

50

Riemannian geometry

 T  g → g  = X −1 gX −1 , corresponding to the coordinate transformation k → k , g → g  is called a transformation of the basis. For matrices of quadratic forms, the Sylvester theorem on the inertia of forms holds. It says that, whatever method is used to diagonalise a real symmetric matrix, the numbers of diagonal elements that are positive, zero and negative are always the same. This set of positive, negative and zero values is denoted by the symbol + · · · + − · · · − 0 · · · 0       n1 times

n2 times

(7.9)

n3 times

where n1 is the number of positive elements, n2 is the number of negative elements and n3 is the number of zero elements, n1 + n2 + n3 = n = dim Vn . The symbol (7.9), called the signature of the metric tensor, is a basis-independent characteristic property of every matrix, and so is a coordinate-independent characteristic of a point of a Riemann space Vn . When n3 > 0, the metric is called degenerate. When n2 = n3 = 0, the metric is positivedefinite. In relativity, a 4-dimensional Riemann space is used, with the signature + − −− or − + ++ or + + +−, depending on the convention (in this text, the signature will always be + − −−). Since such a metric is not positive-definite, the Riemann spaces of relativity are not metric spaces. If the distance dx y between the points x ∈ Vn and y ∈ Vn is defined by the integral (7.2) along any curve (e.g. a geodesic), then dx y = 0 does not imply x = y; the integral can vanish also for such pairs of points that do not coincide. The geometrical and physical meaning of its being zero will be explained later. Coordinate transformations preserve the signature of the metric tensor at each single point. No theorem guarantees that the signature must be the same at different points of the manifold. However, a region with a signature different from + − −− would have no physical interpretation. Usually, the subset on which the signature changes to an unphysical one is, in one sense or another, an ‘edge’ of the manifold or of the allowed coordinate patch. However, transitions of the type + − −− → − + −− do occur, in which two coordinates interchange their roles and another becomes the privileged one. This happens, for example, at the horizon of a black hole (see Section 14.11). For a degenerate metric, its determinant is zero and the inverse matrix to g does not exist. With such a metric, the mapping k → g k is analogous to projecting a vector on a subspace of lower dimension, so no inverse mapping exists. For nondegenerate metrics, the matrix inverse to g does exist, and is denoted g  . It obeys the equation g  g =   . Thus, in a Riemann space with a nondegenerate metric, for every contravariant vector k there exists the corresponding covariant vector g k which is denoted k , and for every covariant vector m there exists the corresponding contravariant vector g  m which is denoted m . The mapping k → k = g k is called lowering the index, the inverse mapping m → m = g  m is called raising the index. In such a Riemann space, we can thus consider contravariant and covariant components of the same vector. In a general manifold, with no metric defined on it, there is no relation between covariant and contravariant vectors.

7.5 The curvature of a Riemann space

51

7.4 Christoffel symbols Now we shall solve Eq. (7.7) for   assuming that the metric tensor is nondegenerate. Let us rewrite (7.7) three times, each time with a different permutation of the indices: g  −   g −   g = 0

(7.10)

g  −

= 0

(7.11)

g  −   g −   g = 0

(7.12)



 g −  g 

Let us add the last two equations, and subtract the first one from the result. Using (7.8) and contracting with g  we obtain   1

 = g  g  + g  − g   2

(7.13)

The affine connection coefficients that are built of the metric tensor in this way are called

 the Christoffel symbols and are denoted  .

7.5 The curvature of a Riemann space The curvature tensor of a Riemann space, built of the Christoffel symbols standing in place of the connection coefficients, is called the Riemann tensor and denoted R   . Since the Riemann spaces are torsion-free, the identities (6.59) and (6.60) for the Riemann tensor reduce to R   = 0

(7.14)

R   = 0

(7.15)

and

(note that the covariant derivative in a Riemann space is denoted by a semicolon). The Riemann tensor obeys one more set of identities. Applying (6.9) and recalling that a metric is covariantly constant, we obtain 0 = g  − g = R   g + R   g 

(7.16)

R  + R  = 0 ⇐⇒ R  = R  

(7.17)

This can be written as

From the above, one more identity can be derived. Equation (7.14), in consequence of R  = R  , can be rewritten in the form R  + R  + R = 0

(7.18)

52

Riemannian geometry

Let us rewrite this equation three more times, each time taking a cyclic permutation of all four indices R  + R + R  = 0

(7.19)

R  + R  + R  = 0

(7.20)

R + R  + R  = 0

(7.21)

Now add the first and fourth equation, and subtract the second and third from the result. Taking into account the antisymmetry in the first pair of indices and in the last pair of indices, we obtain R  = R 

(7.22)

which means that the Riemann tensor is symmetric with respect to the interchange of the first pair of indices with the second. Since R  is a tensor of rank 4, it has n4 components, i.e. 256 in a 4-dimensional space. However, in consequence of the symmetries, only some of the components are algebraically independent. Antisymmetry in   provides nn + 1/2 equations R  = 0 for each set  , which leaves us with at most n4 − n2 · nn + 1/2 = n2 · nn − 1/2 independent components. However, because of the antisymmetry in  , we obtain nn + 1/2 · nn − 1/2 additional equations R  = 0, which leaves us with at most nn − 1/22 independent components. From this, we have to subtract n  n3  equations (7.14). This gives finally  1  n = n2 n2 − 1 nn − 1/22 − n 12 3

(7.23)

independent components, i.e. only 20 when n = 4.

7.6 Flat Riemann spaces If R   = 0 in a Riemann space, then the results of Section 6.5 apply – one can choose   = 0. This equation is preserved by all linear coordinate transcoordinates so that   

∗

formations. In such coordinates, as seen from (7.7), the metric has constant components. Then, linear coordinate transformations can be used so that the metric tensor becomes diagonal and all its diagonal elements are either +1, −1 or 0, thus ds2 =

n   2 i dxi i=1

where i = +1 0 or −1.

7.8 Flat Riemann spaces that are globally non-Euclidean

53

7.7 Subspaces of a Riemann space Let a subspace Sm of a Riemann space Vn be given by the parametric equations x = f   1  2     m  = 1    n. The metric of the space Vn for the pair of points 0a  ∈ Sm and 0a + d a  ∈ Sm is g dx dx = g

x x a b d d   a  b

(7.24)

Hence, g x / a x / b  plays the role of a metric tensor in Sm . We say that the metric of Vn induces the metric in Sm by the formula hab = g

x x   a  b

(7.25)

In the 3-dimensional Euclidean space, in rectangular Cartesian coordinates, the length of a curve is    1  dx 2  dy 2  dz 2 1/2 + + d (7.26) l0 1 = d d d 0 Hence, the metric form here is ds2 = dx2 + dy2 + dz2 , and the metric tensor is the unit matrix. Knowing this, we can use (7.25) to find the metric tensor of an arbitrary 2-dimensional surface in the Euclidean space. For example, for the spherical surface of radius a, with the centre at x = y = z = 0, the parametric equations in spherical coordinates are: x = a sin  cos  Hence

y = a sin  sin 

z = a cos 

  ds2 = dx2 + dy2 + dz2 = a2 d 2 + sin2  d2

and the metric tensor of the sphere is the matrix

0 a2 

hab = 0 a2 sin2 

(7.27)

(7.28)

(7.29)

7.8 Flat Riemann spaces that are globally non-Euclidean A flat space is not necessarily Euclidean. As an example, take a cylinder of radius a. It has parametric equations x = a cos 

y = a sin 

z = z

(7.30)

i.e. z will be used as the second parameter. Hence dx2 + dy2 + dz2 = a2 d2 + dz2 

(7.31)

54

Riemannian geometry

Thus, the metric tensor of a cylinder has constant coefficients in these coordinates, so the Christoffel symbols will all be zero in the same coordinates, hence, the Riemann tensor will be zero – in these coordinates, and so, being a tensor, also in all other coordinate systems. It follows that the surface of a cylinder is flat in the sense of Riemann geometry. However, it is not Euclidean – because one can travel along a geodesic (one of the circles that are perpendicular to generators) still in the same direction and yet arrive back at the starting point in the end. The path of this journey will be a closed curve that is not continuously contractible to a point. In a Euclidean plane such curves do not exist. Hence, the metric tensor determines the local geometry, but does not determine the global topology. Every 2-dimensional subset of a cylinder that is continuously contractible to a point is isometric to a certain subset of a Euclidean plane. The surface of an ordinary torus in a Euclidean 3-space has nonzero curvature (see Exercise 1). But a torus can be flat – provided it is embedded in a 4-dimensional space. To see this, let us introduce polar coordinates in the plane R2 : x = r cos 

y = r sin 

In these coordinates, the metric form of the plane becomes: ds2 2 = dx2 + dy2 = dr 2 + r 2 d2 where, consequently,  ∈ 0 2, the point r  is identical to the point r  + 2 and the curves r = constant are circles. Now take the 4-dimensional Euclidean space with the metric ds4 2 = dx2 + dy2 + dz2 + du2 and introduce the polar coordinates in the planes z = constant u = constant and in the planes x = constant y = constant  x = r cos  y = r sin  z =  cos , u =  sin , where  ∈ 0 2  ∈ 0 2 and the following points are identical: r    ≡ r    + 2 ≡ r  + 2  . The curves on which r   are constant and the curves on which r   are constant are all circles. Now choose the 2-surface given by r = r0 = constant  = 0 = constant. The metric form of this surface is ds2 2 = r0 2 d2 + 0 2 d 2  This is a flat surface (because the metric tensor has constant coefficients), but it has all the topological properties of a torus.

7.9 The Riemann curvature versus the normal curvature of a surface In an n-dimensional Riemann space, the curvature tensor has n2 n2 − 1/12 algebraically independent components, which makes 1 when n = 2. Hence, the curvature of a 2-dimensional surface is determined by just one function, for example R = g  R  . This quantity turns out to be equal to the Gauss curvature, whose description is given below. For the full reasoning see Eisenhart (1940).

7.10 The geodesic line as the line of extremal distance

55

We assume that the reader knows the definition of the curvature of a curve. Now consider a 2-dimensional surface S and a point p ∈ S, at which we want to calculate the curvature of S. Draw the straight line L through p that is perpendicular to S, and then consider an arbitrary plane F containing L. The plane intersects the surface along a curve C called the normal section of S. Now imagine F being rotated around L, and consider the curvatures at p of the resulting normal sections. It can happen that all these curvatures will be equal – this is the case at every point of a sphere, or when L is a symmetry axis of S. But in general the curvature of C changes when F is rotated, and in the collection of all curvatures there will be a maximal and a minimal value. (If the point p is nonsingular, then all the curvatures will be finite.) The Gauss curvature of the surface S at p is the product of the greatest curvature of C by the smallest curvature. When all curvatures are equal, the curvature of the surface is the square of the curvature of normal sections. Knowing this, one can verify that the Gauss curvature is equal to g  R  . This shows that the name ‘curvature tensor’ evokes the right association. Now it is seen why the curvature of a cylinder is equal to zero: at any point of the cylinder one of the normal sections is a straight line whose curvature is zero, while all the other normal sections have positive curvatures. Hence, the smallest curvature of a normal section is zero. The curvature of a one-sheeted hyperboloid is negative (see Exercise 1). Hence, even though a straight line is among the normal sections of such a hyperboloid, the other normal sections have positive and negative curvatures. Then, the zero curvature is neither maximal nor minimal and does not enter the product contained in the Gauss curvature.

7.10 The geodesic line as the line of extremal distance If the length of a curve arc is defined on a manifold, then in the collection of all arcs joining two given points we can look for the arc of extremal (i.e. greatest or smallest) length. Thus, we look for a curve on which, with fixed 0 and 1 , the quantity   1    1/2 g x dx dx  d (7.32)  d d  0 takes the extremal value. It must obey the Euler–Lagrange equations   f f d − = 0

d x˙ x

(7.33)

def

where f is the integrand in (7.32), and x˙ = dx /d. For convenience, let us write   g x˙  x˙   = g x˙  x˙  where  = +1 or  = −1, as appropriate. Then, from (7.33),

g  x˙  1 g x˙  x˙  d − = 0   d 2 g x˙  x˙  g x˙  x˙ 

(7.34)

(7.35)

56

Riemannian geometry

The case g x˙  x˙  = 0 requires separate treatment. We shall do this further on, but for now we assume that g x˙  x˙  = 0. Let us introduce the new parameter s defined by ds  = g x˙  x˙   (7.36) d Then we have in (7.35):

  dx ds dx dx 1 ds d g  − g = 0 d ds ds 2 d ds ds

(7.37)

Hence dx dx d 2 x 1 dx dx + g  2 − g =0 ds ds ds 2 ds ds and, after contracting this with g  ,   d 2 x  dx dx = 0 + ds2  ds ds g  

(7.38)

(7.39)

This is the geodesic equation, (5.13). Thus, in Riemann spaces, a geodesic has another characteristic property: it extremises the distance.  Note that the geodesic extremises not only (7.32) but also the functional 01 g x˙  x˙  d. In this case, the assumption g x˙  x˙  = 0 is not necessary, and a curve of zero length can also be the extremal.

7.11 Mappings between Riemann spaces Now let us apply the considerations of Section 3.10 to the Riemann spaces. If a Riemann space Pm is an image of another manifold Mn (or of a subset thereof) under the mapping F  Mn → Pm , then the metric tensor of Pm can be pulled back to Mn by the mapping F2 ∗ . However, Mn can itself be a Riemann space and have its own metric tensor, in general different from the one pulled back. Hence, more than one metric may be defined on the same manifold. An example of such a situation is a geographic map. It is a projection of a subset of the surface of the Earth into the plane of the sheet of paper. Within the domain of the map, the projection is invertible, i.e. the inverse mapping is defined. This inverse mapping can then be used to pull back the metric of the Earth surface into the plane of the map. Thus, the surface of the page in the atlas has its own Euclidean metric, and also the metric of the surface of the Earth, pulled back by the inverse projection. Navigators who travel over large areas are in fact reading out the metric of a sphere from their maps.

7.12 Conformally related Riemann spaces Let Vn and Un be Riemann spaces of the same dimension, and let x  and ya  be the coordinates in Vn and Un , respectively, where  a = 1    n. Let F  Vn → Un be a

7.12 Conformally related Riemann spaces

57

diffeomorphism of class C1 , and let g and hab be the metric tensors on Vn and Un . On each of the spaces we then have two metric tensors. For example on Un there will be its own metric tensor hab , and the metric pulled back from Vn by 

F2 −1

∗  x x g y = a y b yg xy ab y y

If there exists a scalar function F  Un → R1 such that for any y ∈ Un  ∗  F2 −1 g y = F y−2 hab y

(7.40)

(7.41)

ab

or, equivalently, x x y y g xy = F y−2 hab y ya yb

(7.42)

then we call F a conformal mapping.1 The inverse mapping F −1 is then conformal, too, and F −1 = 1/F . Riemann spaces that can be related by a conformal mapping are called conformally related. A Riemann space that is conformally related to a flat Riemann space is called conformally flat. A conformal mapping does not change the angles between vectors. Take two vectors k x0  and l x0  of nonzero length at x0 ∈ Vn , then the angle between them is g k l cos V =     g k k  g l l 

(7.43)

Now, using (3.16), the analogue of (3.22) for covariant tensors of rank 2 and (7.42), we obtain for the images of the vectors k and l in the tangent space to Un at y0 = Fx0 : hrs F1∗ kr F1∗ ks = F 2

x x yr ys g k k yr ys x x 

= F 2     g k k = F 2 g k k

(7.44)

and similarly for the remaining scalar products in (7.43). Hence, the angle U between the images of k and l is determined by cos U = 

hab F1∗ kaF1∗ lb  hrs F1∗ krF1∗ ks  hmn F1∗ lmF1∗ ln 

g k l V =    = cos   g k k  g l l 

1

(7.45)

The F −2 is just a convention that simplifies some of the further formulae; the important point is that the two metrics differ only by a scalar factor.

58

Riemannian geometry

Equation (7.42) also shows that a conformal mapping maps vectors of zero length on Vn onto vectors of zero length on Un .

7.13 Conformal curvature A second-rank tensor can be constructed from the Riemann tensor def

R = R 

(7.46)

called the Ricci tensor. It is symmetric in . In addition, we calculate its trace def

R = g  R ≡ R 

(7.47)

1   R n 

(7.48)

and its trace-free part R

 def  =R −

Using these quantities we can now define a new tensor of rank 4 called the conformal curvature tensor or the Weyl tensor: def

C   = R  +

1   1   R  −  R n−2 nn − 1 

(7.49)

Note: this definition makes sense only for n > 2. We shall deal with the case n = 2 separately. The Weyl tensor has all the same symmetries as the Riemann tensor, and in addition all of its traces are zero. In relativity, the Weyl tensor describes that part of the gravitational field that propagates into vacuum and is detectable outside the sources, gravitational waves among other things. It is the same for conformally related manifolds: if  g = −2 g ,   then  C  = C   (note the positions of indices; with other positions the two tensors are proportional, but not equal). This fact will be verified in the course of proving the following theorem. Theorem 7.1 If in a Riemann space Vn the Weyl tensor is zero, then the metric of Vn is conformally flat, i.e. there exists a function  such that g = −2  , where R    = 0. When n = 3 C   ≡ 0, but not every 3-dimensional metric is conformally related to a flat one. The necessary and sufficient condition for a 3-dimensional Riemann space to be conformally flat is the vanishing of the Cotton–York tensor   1 def (7.50) C  = 2  R  −  R  4 where   is the Levi-Civita symbol. In two dimensions, the Weyl tensor is undetermined, but every 2-dimensional metric is conformally flat. Proof: (adapted from Raszewski (1958, pp. 516–521))

7.13 Conformal curvature

59

Part I: n > 3 We shall show that if C   = 0, then the equations determining the function  such that  2 g =  do have a solution. The quantities without a tilde will be those determined def

by g ; those with a tilde are determined by  g =  −2 g . We introduce the following conventions: all covariant derivatives will be with respect to g , indices of objects without a tilde will be manipulated by g and indices of objects with a tilde will be manipulated by  g . We first find that          = −  −1   +   −g     

(7.51)

(The last term is in fact a new symbol: the derivative of , which is a covariant vector, has its index raised.) Then we find the corresponding relations between the other quantities:    −2     R  =  2 R  −  −1  (7.52)   −     

 

   R = R + n − 2 −1  +g  −1   − n − 1g  −2        R =  2 R + n − 1 2  − n    

(7.53) (7.54)

R   = 0 Using these equations one can now verify that  C    = C    . Then we require  (which automatically implies  C    = C    = 0). By virtue of (7.52) this means    +  −2  R  =  −1 

  

   

(7.55)

R = 0, so, from (7.54), This implies that also  R = 0 and    = −

1 1 R + n −1     2n − 1 2

(7.56)

and, from (7.53) with use of (7.56):  = −

1 1 1 R + g R + g  −1      n−2 2n − 1n − 2 2

(7.57)

This equation can be rewritten in the form   = [the appropriate expression]. Hence, if such a  exists, then the integrability conditions   −    = 0 should be fulfilled by the right-hand sides. They are equivalent to  −   = R   . In this, we must substitute for R  from (7.55) and for all second covariant derivatives of  from (7.57). After a long calculation, the following result emerges: −R + R  +

  1 g R −g R  = 0 2n − 1

(7.58)

60

Riemannian geometry

The Bianchi identities R   = 0, with (7.49) and C   = 0 substituted into them, when contracted over  , become n − 3−R + R   + g R  − g R  +

 1  g R  − g R = 0 n−1

(7.59)

This, when contracted over  , becomes: 1 0 = 3g  R   = R  − R  2

(7.60)

With n > 3, Eq. (7.58) follows from (7.59) and (7.60), and so is fulfilled in consequence of the Bianchi identities. This means that (7.57) is then integrable, so a function  exists such that g =  2  , where R     = 0. Part II: n = 3 When n = 3, Eq. (7.59) follows from (7.60) and does not determine (−R + R  ), so it cannot be equivalent to (7.58). In this case, (7.58) is an additional condition that must be obeyed by the curvature in order that the metric can be conformally flat. This is equivalent to C  = 0, where C  is the Cotton–York tensor of (7.50). However, with n = 3, the Weyl tensor is identically zero, as can be verified by substituting consecutively all the values of all indices in (7.49). Part III: n = 2 With n = 2, Eq. (7.49) does not apply since the second term becomes undetermined. However, then 1 R  =   R 2

(7.61)

because any tensor antisymmetric in   in two dimensions must be proportional to  , and similarly for the lower indices. Equations (7.52)–(7.54) still apply, but (7.53) and (7.54) follow from (7.52). Consequently, the only limitation on  is in this case the equation  R = 0, i.e. 1    = − R +  −1      2 This can be equivalently rewritten as 1 ln    = R 2 which is a linear inhomogeneous equation of the type of the Poisson equation (for positive-definite signature) or of the wave equation (for indefinite signature). Hence, in every case it will have a solution, so every 2-dimensional metric is conformally flat.

7.14 Timelike, null and spacelike intervals

61

7.14 Timelike, null and spacelike intervals in a 4-dimensional spacetime The physically important 4-dimensional Riemann spaces are those with the signature + − −−, as already mentioned. They are called spacetimes. Consider the following equation in a spacetime: ds2 = g dx dx = 0 Let us choose a point p0 ∈ V4 . We can choose coordinates ⎡ +1 0 0 0 ⎢ 0 −1 0 0 ⎢ g p0  = ⎢ ⎣ 0 0 −1 0 0 0 0 −1

(7.62) so that at p0 ⎤ ⎥ ⎥ ⎥ ⎦

i.e. the metric becomes identical with the Minkowski metric of special relativity. (Note: it becomes Minkowskian only at p0 , and it remains approximately Minkowskian in a small neighbourhood of p0 .) In these coordinates, called locally Cartesian, Eq. (7.62) taken at p0 becomes  2  2  2  2 ds2 = dx0 − dx1 − dx2 − dx3 = 0 (7.63) In a 3-dimensional Euclidean space, the equation z − z0 2 − x − x0 2 − y − y0 2 = 0 describes a cone with the vertex at x0 y0 z0  and the axis parallel to the z-axis. By analogy, the hypersurface in spacetime determined by (7.62) is called a light cone (see Fig. 7.1). The coordinate x0 is called the time coordinate, the remaining ones are F

p E

0

P

Fig. 7.1. Equation (7.62) determines the light cone that divides the neighbourhood of p0 into the future F of p0 , the past P of p0 and ‘elsewhere’ E. A light cone looks so simple only in the flat spacetime in which the coordinates with the property (7.63) can be introduced globally.

62

Riemannian geometry

space coordinates. The light cone divides the neighbourhood of p0 into three disjoint regions. Each point lying on the light cone can be connected to p0 by a geodesic arc of zero length. All curves of zero length, geodesic or not, are called null curves, so the points on the cone are said to be in a null relation to p0 . The tangent vector to a null curve at any point has zero length; such vectors are called null vectors. Each point in the regions F and  dx P inside the cone can be connected to p0 by a curve x  on which g dx > 0 everyd d where. These points are said to be in a timelike relation with p0 , and the vectors of positive length are called timelike vectors. Finally, each point in the region E outside the light  dx cone can be connected to p0 by a curve on which g dx < 0 everywhere. These points d d are said to be in a spacelike relation to p0 , and vectors with negative length are called spacelike vectors. Justifications of these names come from special relativity. The region F inside the cone, in which the x0 -coordinates of all the points are greater than the x0 coordinate of p0 , is called the future of p0 . The region P is called the past of p0 . Finally, the region E does not have a name and is colloquially called ‘elsewhere’ with respect to p0 .1 Note that not every curve lying on the light cone (7.62) has zero length. Only the generators of the cone, which are geodesics, or, more precisely, null geodesics, have this property. Other curves on the cone, for example spirals winding on its surface towards p0 ,  dx are spacelike curves whose tangent vectors have negative g dx . Curves that are null d d but not geodesic are at each point q tangent to the light cone of q, but veer from one cone to another. Figure 7.2 shows a broken null line whose straight segments are null geodesic

Fig. 7.2. Future light cones along a nongeodesic null line with geodesic segments (the thicker line). The line is tangent to each light cone at its vertex, but passes from one cone to another as it proceeds.

1

The whole of Minkowski spacetime can be divided into F, P, E and the light cone relative to every p0 . In curved spacetimes, the light cones can be complicated hypersurfaces that neither are axially symmetric nor have straight generators, and can have self-intersections. The latter necessarily happens in a sufficiently large neighbourhood of a black hole (see Section 14.11). This is why the division of spacetime by a light cone is well defined only in a finite neighbourhood of each p0 .

7.15 Embeddings of Riemann spaces

63

arcs, but at the corners it goes from one cone to another. A general nongeodesic null line can be imagined as a limit of a sequence of such broken null lines as the extent of each geodesic segment (as measured, for example, by the range of the affine parameter) goes to zero. Such null lines through p0 enter the region F, or reach p0 from within P. Similarly, not every curve arc in the regions F and P will be timelike. These regions contain also null nongeodesic curves, as described above, and spacelike curves. The characteristic property of the region F ∪ P is that for each of its points a timelike curve joining it to p0 exists. Such curves do not exist on the light cone and in E. Curves on the light cone that reach p0 are either null or spacelike, and every curve arc in E that reaches p0 will have at least a segment that is spacelike. It should now be clear that a light cone exists at every point of a spacetime, and the analysis above applies to every point. Since ds2 is a scalar, Eq. (7.62) is covariant, so the light cone is a geometric object; it does not depend on the choice of coordinates. Finally, let us emphasise again that the equation of a light cone can be reduced to the form (7.63) only at each point separately. Light cones in curved spacetimes do not look as simple as in the Minkowski space – in general they are not axially symmetric, and their spacelike diameters do not uniformly increase with the growth of x0 . They can have self-intersections (caustics) and the structure of a multi-sheeted surface.

7.15 Embeddings of Riemann spaces in Riemann spaces of higher dimension of Vn be Let Wm be a subspace of the Riemann space Vn , and let the metric tensor  g . Let Wm be defined by the parametric equations x = f   1     m . Then, as we observed in Section 7.7, Wm is itself a Riemann space of m dimensions, with the metric tensor (7.25). Now we ask a question reciprocal to the one answered in Section 7.7. When can a given Riemann space Vn be a subspace of another Riemann space? We do not consider null subspaces (i.e. subspaces whose normal vectors have zero length) because in them the determinant of the metric is zero, and they require a separate treatment. Also, we will investigate only the question of local embeddings, i.e. whether an open subset of Vn can be embedded in another Riemann space. Global embeddings pose additional problems that we will not discuss. If Vn is a subspace of UN of dimension N > n, then a set of functions   A = 1    N (7.64) Y A = f A x1    xn should exist such that g = GAB Y A  Y B 

(7.65)

where GAB is the metric tensor of UN . Equations (7.64) are parametric equations of our Vn as a subspace of UN . Note that Y A and GAB are scalars with respect to coordinate transformations in Vn . The question of whether a given Vn can be embedded in a UN can be answered with the help of the reasoning presented below (see Eisenhart (1964) for a more detailed

64

Riemannian geometry

exposition). Let X%A A be a set of vector fields on UN (where % A = n+1    N labels vectors and A = 1    N labels their components) that are orthogonal to Vn and orthogonal to each other, with each field being of unit length: no sum over % A

GAB X%A A X%A B = %A = ±1 GAB X%A A X%B B = 0

for% A = % B

(7.66) (7.67)

Since Y A  are tangent to Vn and X%A A are orthogonal to Vn , we have GAB Y A  X%A B = 0

(7.68)

for all  and % A. We differentiate (7.65) covariantly by x . Since Y A and GAB are scalars in Vn , we obtain   GAB A Y  Y B  Y C +GAB Y A  Y B  +Y A  Y B  = 0 Y C

(7.69)

Rewriting this equation with indices and signs permuted as −  +   +   and adding all three equations we obtain

  A B A M N (7.70) Y  Y  = 0 GAB Y Y  + MN G

B

For a fixed Y is the collection of components of a vector  in UN tangent to Vn and, since runs through all n values, the collection Y B =1  n is a basis of the tangent space to Vn at a fixed point x  ∈ Vn . Equation (7.70) means that the object in parentheses is orthogonal to all the n tangent vectors to Vn , and so must be spanned on the N − n vectors X%A A that are orthogonal to Vn :   N  A Y M  Y N  = %S %S X%S A (7.71) Y A  + MN % S=n+1 G

S %S is a tensor where %S are the coefficients to be determined below. For a fixed % S labels different s. Using in Vn , symmetric in , and a scalar in UN ; the index % (7.65)–(7.68), we find:



%B = GAB Y A  X%B B + GAB

A MN

 Y M  Y N  X%B B 

(7.72)

G

In the case N = n + 1, the single quantity  defined by (7.72) is called the second fundamental form of the subspace Vn . Note that     A A Y  + Y M  Y N  ≡ Y A  N Y N  MN G

is the directional covariant derivative of Y A  along Y N  (the subscript N denotes a covariant derivative in UN ). Consequently, this quantity measures the rate of change of

7.15 Embeddings of Riemann spaces

65

the th tangent vector Y A  as we move along the th tangent vector field Y N  . Then, %B is the projection of this rate of change on the % Bth normal vector field to Vn . For this reason, the %B are sometimes called the extrinsic curvatures of the subspace Vn embedded in UN . They allow us to ‘view’ the geometry of Vn from an enveloping space and to see a difference between Riemann spaces that have the same intrinsic Riemann geometry. For example, a plane and a cylinder in a Euclidean 3-space that have identical intrinsic geometries have different second fundamental forms. In order to know whether a given Vn can be embedded in a given UN , we have to find out whether the functions Y A obeying (7.65) exist. They must obey (7.71), which determine the second covariant derivatives of Y A  in Vn . These equations will be solvable if the integrability condition – the Ricci formula (6.9) – is fulfilled: Y A  −Y A   = R  gY A 

(7.73)

where R  g is the Riemann tensor of Vn . In calculating the third covariant derivatives of Y A from (7.71), we will encounter the first derivatives of X%S A , so we need to know more about them. Differentiating (7.68) covariantly by x , eliminating GAB Y A  X%B B with use of (7.72) and making use of covariant constancy of GAB :

    R R C GRB + GAR Y C  (7.74) GAB  ≡ GAB C Y  = AC BC G

G

we obtain another expression for %B , which is equivalent to (7.72):   R %A = −GAB Y A  X%A B  −GAR Y A  Y C  X%A B  BC

(7.75)

G

This can be equivalently written as   − %A = GAB Y A  X%A B C Y C 

(7.76)

which is a covariant derivative of X%A B in UN projected onto vectorstangent  to Vn . This B provides another interpretation of the second fundamental forms: X%A C Y C  is the rate of change of the % Ath normal vector to Vn as we move along the th tangent field Y C  , and %A is the projection of that rate of change on the th tangent vector field Y A  . Equation (7.76) clearly shows that %A are scalars in UN . Now we define the following set of vector fields on Vn :   def (7.77) %R%S = GAB X%R A X%S B C Y C  where % R % S = n + 1    N . Applying the identity     GAB X%R A X%S B  = GAB X%R A X%S B  − GAB X%R A  X%S B

66

Riemannian geometry

then making use of (7.66), (7.67) and (7.74) we note that the %R%S are antisymmetric in % R% S: %R%S = −%S%R

(7.78)

so they vanish identically when N = n + 1. The derivatives X%S B  are not tensors in UN . Still, they are objects with one contravariant index in UN , and so in every fixed coordinate system they can be decomposed in the vector basis Y B  X%S B ; only the coefficients of the decomposition will not be scalars: N 

X%S B  = A%S Y B +

B%P%S X%P B

(7.79)

% P=n+1

where the coefficients A%S and B%P%S are determined when (7.79) is substituted in (7.75) and (7.77). Making use of (7.65)–(7.68) and contracting the result of substitution in (7.75) with g  , we obtain   R

  A%A = −g %A − g GAR Y A  Y C  X%A B (7.80) BC G   R Y M  X%S N X%R B  (7.81) B%R%S = %R %R%S − %R GBR MN G

B = n + 1    N is a field of vector Note now that the set Y A  X%B A   = 1    n % bases on UN , of exactly the kind we used in Section 4.3. In agreement with our considerations there, the metric tensor GAB in UN can be represented through its scalar components in these bases: %% = X% A Y B  GAB G A A

% = Y A  Y B  GAB = g G %%% = X% A X%B B GAB G AB A

% A % B = n + 1    N

(7.82)

Since X%A A are orthogonal to all Y A  and to other X%B A , we have: %% = 0 G A

%%% = % %% G AB A AB

(7.83)

%AB has the same block-diagonal form Therefore, the inverse metric G % = g  G

%%A = 0 G

%%A%B = % %A%B  G A

(7.84)

The same coefficients Y A  X%B A  can then be used to represent the inverse metric GAB % G %%A and G %%A%B . Adapting Eq. (4.16) to our present notation, we have via the G GAB = Y A  Y B  g  +

N  % P=n+1

%P X%P A X%P B 

(7.85)

7.15 Embeddings of Riemann spaces

Using this to eliminate Y A  Y B g  , we find from (7.80):   B

B  B A%S Y = −g %A Y − Y C  X%A S SC G   N  R +GAR Y C  X%A S %P X%P A X%P B  SC % P=n+1

67

(7.86)

G

Using this and (7.81) in (7.79), we see that two of the sums over % P cancel out and the result is   N  B Y C  X%S S + %P %P%S X%P B  (7.87) X%S B  = −g  %S Y B − SC % P=n+1 G

Now we can employ the integrability condition (7.73). Substituting for Y A  from (7.71), then using (7.71) and (7.87) to eliminate the second derivatives of Y A and the derivatives of X%S A , we obtain RA MNP GY M  Y N  Y P +

N 

  %S X%S A %S − %S 

% S=n+1

+

N 

  %S Y A  g  %S %S − %S %S

% S=n+1

+

N 

N 

  %S %P X%P A %S %P%S − %S %P%S

% P=n+1 S=n+1 %

− R  gY A  = 0

(7.88)

where RA MNP G is the Riemann tensor of UN calculated at points of Vn . Since Y A  X%B A  are a basis of the tangent space, Eqs. (7.88) are equivalent to the collection of projections of (7.88) on Y A   and X%B A . Contracting (7.88) with GAQ Y Q  and with GAQ X%T Q and using (7.65)–(7.68), we obtain, respectively R g = RQMNP GY Q  Y M  Y N  Y P +

N 

  %S %S %S − %S %S

(7.89)

% S=n+1

%T  − %T   = −RQMNP GX%T Q Y M  Y N  Y P −

N  % S=n+1

  %S %S %T%S − %S %T%S 

(7.90)

68

Riemannian geometry

Equations (7.89)–(7.90) are called the Gauss–Codazzi equations. When N = n + 1, this is the full set of necessary and sufficient conditions for Vn to be embeddable in UN . If N > n + 1, then (7.89)–(7.90) must be supplemented with the integrability conditions of (7.87), X%S B  −X%S B   = 0. Using (7.87), (7.90) and eliminating second derivatives of Y A by (7.71), we find these conditions to be   %P X%P B %P%S − %P%S 

N  % P=n+1

N 

+

N 

  %P %R X%R B %P%S %R%P − %P%S %R%P

% P=n+1 % R=n+1 N 

+ g 

  %P X%P B %S %S − %S %S

% P=n+1

+ RB ACD GY C  Y D X%S A + g  Y B  RQMNP GX%S Q Y M  Y N  Y P = 0 A

(7.91) A

As before, this is equivalent to the set of projections on Y   and X%B . However, the projection on Y A   is zero, so the other one fully represents (7.91). Contracting (7.91) with GBQ X%T Q we obtain %T%S − %T%S  + +g

N 

  %P %P%S %T %P − %P%S %T %P

% P=n+1

 

%T  %T  − %T  %T 



+ RQACD GX%T Q Y C  Y D X%S A = 0

(7.92)

In relativity, Eqs. (7.89), (7.90) and (7.92) appear almost always in the special case N = n + 1 (actually, most often with N = 4 and n = 3, i.e. for hypersurfaces in spacetime). In that case, they simplify. Equations (7.92) are fulfilled identically (because, as already stated, %R%S = 0 in this case, and the indices with a hat run through just one value N = n + 1, while all terms in (7.92) are antisymmetric in % T% S). The Gauss–Codazzi equations then become R g = RQMNP GY Q  Y M  Y N  Y P   +   −    −   = −RQMNP GX Q Y M  Y N  Y P

(7.93) (7.94)

where X Q is the single normal vector to Vn and  = GAB X A X B . The expression (7.76) may be simplified further when the coordinates in Un+1 are adapted to Vn as follows. Through every point of Vn we run a curve C(p) in Un+1 orthogonal to Vn and choose the arc length s on the curves as the Y n+1 coordinate in Un+1 in such a way that Y n+1 = A = constant on Vn . The equations A = Y n+1 = constant then

7.15 Embeddings of Riemann spaces

69

define other hypersurfaces in Un+1 . The Y 1    Y n  coordinates in Un+1 are chosen so that in Vn they coincide with the intrinsic coordinates of Vn , Y  = x ,  = 1    n on Vn . In such coordinates Gn+1 Vn  = 0 and G Vn  = g . In these coordinates, (7.76) may be written as  = −X 

(7.95)

In some textbooks, Eq. (7.95) is used as the definition of the second fundamental form of a hypersurface. Although correct in principle, it is rather misleading, since it has the appearance of a fully covariant definition, which it is not. It holds only in the adapted coordinates, and the semicolon in (7.95) denotes not the covariant derivative in Vn , but the Vn components of the covariant derivative in UN . Another context in which the Gauss–Codazzi equations sometimes appear in relativity is the problem of embedding a given spacetime Vn in a flat Riemann space of higher dimension. Then, Eqs. (7.89), (7.90) and (7.92) should be fulfilled with RABCD = 0. With flat GAB , Eqs. (7.65) are a set of nn + 1/2 differential equations for N unknown functions Y A . In fact, we do not know what signature GAB should have, so the signs in the canonical form of GAB are additional, discrete unknowns. A simple accounting suggests that N = nn + 1/2, then the set should have a solution (for n = 4 N = 10). However, this does not take into account various subtle possibilities. For example, if GAB is positive-definite while g is not, the set (7.65) will be unsolvable with any N . This problem of embedding in flat Riemann spaces has not been solved in general, and N ≤ nn + 1/2 is only a plausible hint. However, for various special cases the embeddings were demonstrated by explicit calculations and often the dimension of UN is considerably smaller than nn + 1/2. For the smallest N for which an embedding of a given Riemann space in a flat Riemann space is possible, the number N − n is called the class of the Riemann space. For example, all conformally flat Riemann spaces can be embedded in flat spaces of dimension n+2 (Pleba´nski, 1967) and thus are of class 2; the 4-dimensional manifold corresponding to a spherically symmetric gravitational field in vacuum can be embedded in a 6-dimensional flat space (see Section 14.10), i.e. is also of class 2. Several other 4-dimensional Riemann spaces can be embedded in a 5-dimensional flat space (Stephani, 1967b). In the adapted coordinates, Eq. (7.75) reduces to another useful, although non-covariant, form. In these coordinates, X B has only the n + 1st component, thus X  = 0. Since Y  = x on Vn , the first term in (7.75) becomes −Gn+1 X n+1  = 0 (because Gn+1 = 0).       The second term becomes g n + 1 X n+1  It is easy to verify that n + 1 = G G 1  − g g n+1 thus 2 1  = − g n+1 X n+1  2

(7.96)

70

Riemannian geometry

Thus, in the adapted coordinates,  is proportional to the directional derivative of the metric in Vn along the normal vector. 7.16 The Petrov classification One unsolved problem of general relativity is that of detecting invariant differences between metrics. Two metrics that seem to be different might be representations of the same metric in two coordinate systems. Finding a transformation between them or proving that no such transformation exists requires solving a complicated set of partial differential equations, for which no general methods of investigation are known. Therefore, each invariant criterion that allows us to detect coordinate-independent differences between metrics is very useful. One of such criteria is the Petrov classification of algebraic types of the Weyl tensor. It was first introduced by Petrov (1954). Later, a few other methods of introducing the same classification were presented by Pirani (1957) and Debever (1959), and the simplest one, based on spinorial techniques, was proposed by Penrose (1960) (see descriptions of all methods by Stephani et al. (2003); the Penrose method is presented in our Chapter 11). We shall use here the method that can be introduced in the briefest way (Ehlers and Kundt, 1962; Barnes, 1984), but it has the disadvantage that it is not simple in practical application. Note: this classification applies only in four dimensions and for the Lorentzian signature + − −−. Analogous classifications may exist for higher dimensions and for other signatures, but they have not been considered in the literature. Let u be an arbitrary timelike vector field of unit length, g u u = 1. We define the following two tensors: def

E = C  u u

(7.97)

1√ −g C   u u (7.98) 2 called, respectively, the electric part and the magnetic part of the Weyl tensor; g is the determinant of the metric tensor, necessarily negative because of the signature. (These colloquial names have nothing to do with physical interpretation; they refer to the algebraic analogy between (7.97)–(7.98) and the decomposition of the tensor of electromagnetic field into the electric field and the magnetic field – see Chapter 12.) Both these tensors are symmetric, although the symmetry of H is not self-evident (it follows from the traces of C   being zero and from the properties of  ). Also, both these tensors represent the Weyl tensor uniquely, since inverse formulae exist (see Exercise 9). We use these tensors to form a new complex tensor, def

H =

def

Q = E + iH = Q  

(7.99)

Since E u = H u ≡ 0, we have Q u ≡ 0, so Q is in fact a tensor & in&a 3-dimensional space. Let us investigate the minimal equation for the matrix Q = &Q &. Since g  Q ≡ 0

(7.100)

7.16 The Petrov classification

71

the sum of eigenvalues of Q must be zero. The following possibilities then arise (I denotes the unit matrix): The minimal equation

Petrov type

Q − 1 I Q − 2 I Q − 3 I = 0 Q − I2 Q + 2I = 0 Q − I Q + 2I = 0 Q3 = 0 Q2 = 0 Q=0

I II D III N 0

The relations between different Petrov types are shown in Fig. 7.3. The Petrov classification is important because it is coordinate-independent. Two metrics whose Weyl tensors are of different Petrov types cannot be different coordinate representations of the same metric (but one metric can be a limiting case of the other). If the Petrov type is the same for two metrics, then the question is still undecided, and other criteria must be used. In general, this equivalence problem is not algorithmic, but attempts to solve it ‘in practice’ are under way, with some success already (Stephani et al., 2003, Chapter 9; Lake, www.grdb.org). degree of the minimal equation

3 I

3

2 I

2 D

1 I

N

0

1

number of eigenvalues

Fig. 7.3. The Petrov classification. Arrows show possible specialisations.

72

Riemannian geometry

As seen from the formulae above, in order to determine the Petrov type by this particular method, one must choose a timelike vector field u . But it can be verified that the Petrov type thus established does not depend on u (see Exercise 10).

7.17 Exercises 1. Find the metric tensors of the following surfaces: (i) a cone; (ii) a paraboloid of revolution; (iii) one- and two-sheeted hyperboloids of revolution; (iv) a torus; (v) a cylinder. Calculate the curvature of a cone, a cylinder, a one-sheeted hyperboloid and a torus. 2. Show that the geodesics on a 2-dimensional sphere are great circles. Hint. First derive the equation of a great circle in spherical coordinates, then solve the geodesic equation in the same coordinates. 3. Solve the geodesic equation on the surface of a cylinder. What curves are the geodesics? 4. Show that the Mercator mapping used in cartography is a conformal mapping of a sphere onto a cylinder. This mapping is obtained when a cylinder is wrapped around the globe so that it is tangent to the globe all along the equator. The images of the points on Earth’s surface are obtained by drawing straight lines through the centre of the globe. The image of the point where the straight line intersects the globe’s surface is the point where the same line intersects the cylinder. 5. Show that a conformal image of a geodesic line of zero length in Vn is also a geodesic line of zero length in Un . 6. Verify that the Weyl tensor indeed has the properties mentioned after Eq. (7.49), i.e. C  = C  = C  = C  C  = 0 and C   = 0. The other traces are zero in consequence of this one and of the antisymmetries. 7. Verify Eqs. (7.51)–(7.54) and then verify that the Weyl tensors corresponding to conformally related Riemann spaces are indeed equal or proportional, depending on the positions of indices. Namely, if  g is the metric tensor in  Vn and g is the metric tensor in Vn , and  g = −2 g ,   '   = C   . then C 8. Find the second fundamental form for a plane and for a cylinder embedded in a Euclidean E3 . 9. Verify that the tensors E and H and the vector field u uniquely determine the Weyl tensor C   by   1 C   = √  u H u − H u −g   √ + −g  u H  u − H  u −u u E   + u u E  + u u E   − u u E  

(7.101)

Hint. Calculate the quantity    defined below in two ways. First introduce the auxiliary operator h  =   − u u 

h  u = 0

h  h  = h  

It projects vectors onto a hypersurface element orthogonal to u . The quantity  as follows: 

1 def    = √ 1 2 3 1 2 3 H 1 2 2 3 u1 u1 h1 h2  h 2 h 3  −g

(7.102) 



is defined

(7.103)

7.17 Exercises

73

The two ways to calculate it are these: 

(i) Substitute 1 2 3 1 2 2 3 = 21 1 2 , and write out all h-operators as in (7.102). You will find that    = 0. (ii) Substitute for H from (7.101), and use the following identity: 1 1 C 2 3 4 =  1 42 C 2 3 1 2 = 1 2 3 4  4 3 4 C 2 3 1 2  2 4

(7.104)

  Then, using  1 2 3 =  1 2 3 , express   through C  and the (single and   double) projections of C  on u . Equation (7.101) results with the help of the following two auxiliary formulae:

1 C   u = √  u H − u E  + u E  −g   = g −1 g g g  g  

(7.105) (7.106)

10. Show that the Petrov type determined by the method of Section 7.16 does not depend on the choice of the vector field u . Hint. Consider a Lorentz transformation that changes u into another timelike vector w and verify what happens to Q and its minimal equation in consequence of this. The matrix of a Lorentz transformation, u = L  w , has the property g L L  = g  .

8 Symmetries of Riemann spaces, invariance of tensors

8.1 Symmetry transformations We noted in Section 3.10 that a coordinate transformation on a manifold may be interpreted as a mapping of the manifold into itself. Now we shall interpret the associated transformations of the tensor fields. Let F  Mn → Mn be an isomorphism between two subsets of the manifold Mn , p ∈ Mn and Fp = p ∈ Mn . Then, the mappings associated with F carry tensors from p to p . Thereby, a tensor T that was attached to p before the transformation becomes T  attached to p . Now consider a subset U ⊂ Mn and its image FU ⊂ Mn . Suppose that F is an element of a continuous group of mappings Ft , with Ft0  being the identity map. If F = Ft1 and t1 − t0  is sufficiently small, then FU ∩ U = ∅. So let p p ∈ FU ∩ U. Then p is an image of another point q p = Fq, and the tensors that were attached to q before the transformation were sent into p (see Fig. 8.1). Hence, we have two tensors attached to each point p: Tp that was there before the transformation and T  p that was sent to p from q by the transformation. The latter can be calculated from the old Tq by (3.10). Consequently, we can compare T  p with Tp. AFTER BEFOR

(q, T (q)) (p, T (p))

F

(p, T ′(p))

(p ′, T ′(p ′))

Fig. 8.1. A mapping F of the manifold Mn into itself takes the point q to p, and the associated mapping transforms the tensors Tp and Tq into T  p  and T  p, respectively. Thus, after the transformation we have two tensors at the same point: Tp that was there before, and T  p that was brought to p by the mapping. If T  p = Tp for all p ∈ Mn , then the tensor field T is invariant under F . 74

8.2 The Killing equations

75

If it so happens that, under the mapping F , T  p = Tp for all points of the manifold, then we call the tensor field T invariant under the action of F , and we call F an invariance transformation of T . If Mn is a Riemann space, and the metric tensor of Mn is invariant under F , then the mapping F is called a symmetry or an isometry of Mn . There is no general theory of all kinds of invariances; for example, no theory covers discrete invariances (like reflections or the groups known in crystallography). However, there exists a theory of those mappings that constitute continuous groups, and it will be the subject of this chapter.

8.2 The Killing equations Let  be a one-parameter family of mappings of a manifold Mn into itself such that def

to every value of the parameter t from the range t1  t2 = B ⊂ R1 there corresponds a mapping ft  Mn → Mn : def

R1 ⊃ B = t1  t2  t → x = f  t x 

(8.1)

where ft is the collection of all the functions f  at a given t and  is the collection of all the mappings ft for every value of t ∈ B. Let us also assume that for t = t0 where t1 ≤ t0 ≤ t2 the mapping ft0 is an identity: f  t0  x = x

(8.2)

Example: let B = 0 2 , Mn = R3 , and let ft be the rotation of R3 around a fixed axis A by the angle t.  is then the collection of rotations of R3 around A by all angles in the range 0 ≤ t < 2 and t0 = 0. Now let p ∈ Mn , and apply to p the mappings ft corresponding to all t ∈ B. The collection of all images of p will then be an arc of a curve in Mn passing through p = ft0 p, and each p ∈ Mn may be used to generate such an arc. The arc is called the orbit of p under the action of , and p is called the initial point of the orbit (although in ‘practical’ instances the orbits are closed or infinite curves with no endpoints). We assume that (1) the functions f  t x are of class C2 with respect to t; (2) each ft is invertible; and (3) its inverse (denoted ft−1 ) is also of class C2 . Assumption (1) implies that along each orbit a field of tangent vectors exists and is continuously differentiable. Assumption (2) implies that the mappings of the family  and their inverses form a group G. The group multiplication is the superposition of the mappings:     ft2 ft1 x = ft2 ft1 x  (8.3)   where ft1 is represented by f  t1  x and ft2 is represented by f  t2  ft1 x . Assumption (3) guarantees that the orbits generated by G will have a continuously differentiable field of tangent vectors. For each mapping ft we may then write (from Taylor’s formula):    f     t − t0  + O 2  x =x + (8.4) t t=t0

76

Symmetries of Riemann spaces def

where x  = f  t x, x = f  t0  x,  = t − t0 and O2  has the property O2  = 0 →0 

lim

(8.5)

Note that we are not making any approximation here; Eq. (8.4) is exact, but the form of O2  will in the end turn out to be irrelevant. All such irrelevant terms will be denoted by the same symbol O2  even though they may not be identical to each other. The quantities    def f  k = (8.6) t  t=t0

are components of the vector field tangent to the orbits at their initial points and are called the generators of the group G. Suppose that a tensor T is invariant under all the transformations in :  T p = T p

for all p ∈ Mn and t ∈ B

(8.7)

What analytic condition must T fulfil? Again from Taylor’s formula:    T p  = T p + T pk + O2 

(8.8)

where p has the coordinates x  = f  t x and p has the coordinates x = f  t0  x. From (8.4) and (8.6) we have     x    x =   x − k − O 2 =   − k    − O 2   x x x    x =   − k    − k   − O2  − O2  x =   − k  + O2 

(8.9)

(We do not differentiate  because we have advanced along the orbits by the fixed parameter distance  = t − t0 which is coordinate-independent.) Hence, from (8.9) and the transformation law for T  T p  =

x x T p x x 

= T p − k  T p − k  T p + O2  Comparing (8.8) with (8.10) and using (8.7), we have    k T + k  T + k  T + O2  = 0

(8.10)

(8.11)

We now divide (8.11) by , let  → 0 and recall (8.5). The result is k T + k  T + k  T = 0

(8.12)

8.3 Generators and invariance transformations

77

These are the Killing equations, and their solutions k x are called Killing vector fields. Every field of tangent vectors to orbits of invariance transformations of T must fulfil (8.12), and every solution of (8.12) generates an invariance group of T . How to find the invariance transformations given k and vice versa will be shown in the next section. Equations (8.12) can be rewritten in an equivalent form that shows explicitly their covariance: k T + k  T + k  T = 0

(8.13)

If T = g (the metric tensor), then, in view of g = 0, Eq. (8.13) may be rewritten as k + k ≡ 2k = 0

(8.14)

In this form, the Killing equations are most easy to remember, but less convenient to work with (and apply only to the metric tensor). Note that Eq. (8.12) applies only to a doubly covariant tensor field, and only in this case are the generators of invariances called Killing vector fields. We shall deal with invariances of other tensor fields in Section 8.5 and thereafter.

8.3 The connection between generators and the invariance transformations 

If x = f  t x is a family of invariance transformations of a certain tensor field, then the corresponding generator is given by (8.6), where t = t0 corresponds to the identity transformation. Finding the family of invariances given k is less straightforward. Any orbit B  t →  x t = f  t x is at its every point tangent to k p  (where x  are the coordinates of p ). Hence the orbits must obey dy = k y dt

(8.15)

y t=t0 = x

(8.16)

with the initial conditions

Equations (8.15)–(8.16) are to be understood as follows. A solution to (8.15) will be a family of curves y = f  t C1   Cn , labelled by n parameters C1   Cn . The condition (8.16) allows one to express the constants C in terms of the coordinates x of the initial points of the curves. In this way, we obtain the set of functions y = f  t x that satisfies Eqs. (8.15) and the initial conditions (8.16).

(8.17)

78

Symmetries of Riemann spaces

8.4 Finding the Killing vector fields The Killing equations are applied to two kinds of problems: 1. Finding the metric tensor of a Riemann space whose symmetries are assumed – then they are equations determining g , with k given. 2. Finding the symmetries of a Riemann space whose metric tensor is given – then they are equations determining k with g given. An example of the first application will be shown in Section 8.9. The second application requires additional explanation. The Killing equations are linear and homogeneous in k , which means that if k and l are Killing fields, then so is Ak + Bl , where A and B are arbitrary constants. A general solution of the Killing equations should thus be a linear combination of basis solutions. Does there exist a finite basis in the space of solutions of the Killing equations? The answer is: yes, but only for the proper Killing equations, i.e. for the generators of invariances of the metric tensor. The proof given below (borrowed from Stephani (1990)) does not work if K generates an invariance group of a tensor field other than the metric tensor (and examples of infinite bases are known (Krasi´nski, 1983)). For a field K generating symmetries of Mn we have from (8.14) K = −K 

(8.18)

K − K = R  K

(8.19)

and from the Ricci identity

Because R  ≡ 0, we have from the above       K − K  + K − K  + K − K  = 0

(8.20)

Using now (8.18), the above reduces to K + K + K = 0

(8.21)

and, again from (8.18), this yields K = K − K = R  K

(8.22)

Thus, in a given Riemannian manifold (where g and, consequently, R  are given as functions of x on open neighbourhoods of any nonsingular point), Eq. (8.22) allows us to calculate K p0  algebraically if K p0  is given. If K p0  is given as well, then from the derivative of (8.22) we can algebraically calculate K p0 . By differentiating (8.22) consecutively, we can then calculate all covariant derivatives of K at p0 . Further, having all these derivatives (and hence, equivalently, all partial derivatives of K at p0 ), we can calculate K p where p ∈ Mn lies in such a neighbourhood of p0 in which the Taylor series for K p is convergent. However, after each differentiation a new derivative of the Riemann tensor appears, so, in order that the series is convergent, R  must be analytic

8.5 Invariance of other tensor fields

79

in that neighbourhood.1 From this argument we see that K p0  and K p0  at any chosen p0 ∈ M are the data which are needed to determine K p uniquely (if R  p0  are not sufficiently differentiable, then simply another initial point is needed, not more data). But K obey (8.18), so K p0  are 21 nn − 1 constants, and K p0  are n constants in an n-dimensional manifold. Thus, the Taylor series for K p will contain at most 21 nn + 1 arbitrary constants multiplying various functions of x. The multipliers of those constants will be the basis solutions, and hence their number cannot exceed 21 nn + 1. The prescription for finding the basis of the Killing vector fields for the metric tensor is therefore the following: 1. Solve the Killing equations. The general solution will then depend on N ≤ 21 nn + 1 arbitrary constants, k = K  A1   AN  x. 2. Calculate  def K k =  i = 1  N (8.23) i Ai – the basis. Each k generates a one-parameter subgroup of symmetries discussed i

in Section 8.2. A possible confusion has to be explained here. For brevity, we say ‘Killing vectors’, but in truth these are vector fields, whose components are functions. Hence, the number of linearly independent Killing vector fields can be larger than the dimension of the manifold. For example, in a flat Riemann space the number of linearly independent Killing vector fields is equal to the maximal one, 21 nn + 1. For tensor fields other than the metric tensor a finite basis may not exist, i.e. the general solution of the invariance equations will contain arbitrary functions rather than arbitrary constants. This is the case e.g. for the invariance group of R  (note the positions of indices!) in a space of constant curvature: any arbitrary vector field l has the property that R   x = R  x for transformations generated by l (see Krasi´nski (1983) for less trivial examples). Thus, any coordinate transformation x  = f  x is an invariance transformation of that Riemann tensor. 8.5 Invariance of other tensor fields We investigated the conditions of invariance of the metric tensor in more detail because they are the most important and are most frequently met. Sometimes, though, we need to know the invariance transformations of other tensor fields. Repeating the reasoning (8.7)–(8.12) for the field of contravariant vectors, that is, assuming the condition V   x = V  x, we would obtain the following equation: k V   −V  k  = 0

(8.24)

where k is the generator of the transformation group. Invariance conditions for other tensor fields are given in the exercises. 1

For more on the existence of symmetries see Section 8.11. In truth, the curvature tensor does not have to be analytic.

80

Symmetries of Riemann spaces

8.6 The Lie derivative If we trace the procedure that led to the Killing equations (8.12), and also the procedures leading to the other equations listed in Section 8.5 and in the exercises, then we will notice that the invariance equations are obtained in the following steps: 1. Take the tensor field T (arbitrary indices) to be Tt0 , where t0 is the value of the orbit parameter corresponding to the identity transformation. 2. Using the transformation law for T under coordinate changes, calculate Tt – the value of T transported to another point along the group orbit. The calculation is done up to terms linear in t − t0  (the remaining terms are not neglected, but left in implicit form). 3. Calculate the quantity − lim

t→t0

Tt − Tt0  def = £ T k t − t0

(8.25)

where k = dx /dtt=t0 , and equate the result to zero.

The quantity − £ T defined in (8.25) is thus the derivative of the tensor field T by k

the parameter of the transformation. As seen from (8.25), that derivative measures the speed of changes of the field T transported along the orbits tangent to k with respect to the values of T defined at the consecutive points. If £ T = 0, then the field transported k

along the orbit everywhere coincides with the tensor T defined before the transformation. The quantity £ T is called the Lie derivative of the tensor field T along the vector field k

k and can be calculated also if T is not invariant under the action of .1 We have thus:

£ T = 0 ⇐⇒ T  P ≡ TP (8.26) k

The Lie derivative has all the algebraic properties of ordinary differentiation: it is linear with respect to addition, gives zero when acting on a constant, and when acting on a tensor product it obeys:



£ T1 ⊗ T2  = £ T1 ⊗ T2 + T1 ⊗ £ T2 (8.27) k

k

k

These properties allow us to derive the formula for the components of the Lie derivative   of any tensor field T11 lk along any vector field k using the results of Section 8.5 and of Exercises 7 and 8:  

 

£ T11 lk = k T11 lk − k

1

k  i=1

  k

ki i T11 li

+

k 

 

kj j T11 jk l 

(8.28)

j=1

´ The notion of the Lie derivative was introduced by Slebodzi´ nski (1931), but the name was proposed by van Dantzig and made popular by Schouten (Schouten and van Kampen, 1934; Schouten and Struik, 1935).

8.8 Surface-forming vector fields

81

where sums over i and j extend over all positions of i and j , respectively, in the series of indices. Thus, the Lie derivative acts similarly to a directional covariant derivative along k, the factors −k   playing the role of the Christoffel symbols projected onto k,  −k  ←→  k With the help of (8.28) one can now verify that for any tensor field T and any vector fields k and l we have £ T ≡ £ £ T k

kl

l

(8.29)

so k l always generates an invariance of T if k and l do.

8.7 The algebra of Killing vector fields Since for the Killing fields generating symmetries of Mn a finite basis exists, we conclude from the last statement of the previous section that there exist such constants C l ij that, for the basis fields, k  k = C l ij k i j

l

sum over l

(8.30)

The constants C l ij are called structure constants of the symmetry group. We see thus that the set of Killing fields for a given manifold Mn is a Lie algebra. For generators of invariances of other tensor fields, the coefficients C l ij will not necessarily be constant.

8.8 Surface-forming vector fields Let us consider two linearly independent vector fields, k and l, defined on Mn . They define two families of curves that are everywhere tangent to these fields, by the equations k = dx /d and l = dx /d, where  is a parameter on each curve. Take a single curve C of the family defined by the field l, and then consider all the curves defined by the field k that intersect C (see Fig. 8.2). They form a surface S out of a single curve tangent to l and of curves tangent to k. It is clear that other vectors of the field l attached to points of this surface need not be tangent to it. However, if they are tangent to every such S, then the vector fields k and l are called surface-forming. What is the condition for two vector fields to be surface-forming? Consider the family of curves x  tangent to the vectors of the field k, lying in the surface S. They define a family F of mappings of the surface S into itself (the image of a point S  p = x 0  is the point p = x 0 + , where  is the same for all p ∈ S). The mapping F1∗ associated to F maps then vectors tangent to S onto other vectors tangent to S. Hence, starting with the vectors l that are tangent to our initial curve C, we can construct the field F1∗ l of vectors tangent to S. The vectors of the field k attached to points of S are tangent to S, too – because S was constructed in this way. Hence, the vectors of the field

82

Symmetries of Riemann spaces F1* l k

l l k

l

l k C

Fig. 8.2. We take a single curve C of the curves tangent to the field l and consider all curves tangent to the field k that intersect C. In this way, we form a surface S, to which other vectors of the field l may or may need not be tangent. If they are, then the vector fields k and l are called surface-forming.

l that are attached to points of S will be everywhere tangent to S if they are everywhere spanned on the vectors k and F1∗ l, thus ak +  b F1∗ l  l = 

(8.31)

where  ax and  bx are arbitrary scalar functions and  bx = 0 (with  bx = 0, the fields k and l would be linearly dependent, contrary to our assumption). This condition may be rewritten as follows:   a b − 1  def  l = ak + bl (8.32) l − F1∗ l = k +   b b   But the rate of change

of l − F1∗ l along the curves tangent to k is, by definition, the 

Lie derivative £ l k

. Finally then, the necessary and sufficient condition for the vector

fields k and l to be surface-forming is

 k l  ≡ £ l = ak + bl k

(8.33)

8.9 Spherically symmetric 4-dimensional Riemann spaces We call a Riemann space spherically symmetric when the group of rotations around a point, O3, is its isometry group. Its metric tensor must thus obey the Killing equations for each of the three generators of the group O3. We shall first derive the formulae for these generators. The orbits of O3 are 2-dimensional spheres. Each sphere can be embedded in a 3-dimensional Euclidean space E3 . Its equation is then x2 + y2 + z2 = R2 

(8.34)

where R is the radius of the sphere, and x y z are Cartesian coordinates in E3 . The rotation around the centre of the sphere by the angle  in the plane xi  xj  is then

8.9 Spherically symmetric 4-dimensional Riemann spaces

83

described by the transformation xi = xi cos  + xj sin  xk = xk

xi = −xi sin  + xj cos 

for i = k = j

(8.35)

The angle  is here the group parameter. By using Eq. (8.6) we then find that the corresponding Killing vector is k  = x j  i − x i   j

(8.36)

ij

An arbitrary transformation of the sphere into itself can be described as a composition of three consecutive rotations around different axes. Hence, a basis of the space of Killing vectors will be three generators corresponding to rotations around three different axes. It is often convenient to represent the Killing vectors by the corresponding operators of directional derivatives, also called generators: def

J = k

i

i

 x

(8.37)

We will choose as our basis of Killing fields the generators of rotations around the three axes of the rectangular Cartesian coordinate system: J =x

xy

  −y  y x

J =y

yz

  −z  z y

J =x

xz

  −z z x

(8.38)

Now let us transform the generators to the spherical coordinates x = r sin  cos 

y = r sin  sin 

z = r cos 

(8.39)

In these coordinates the generators become, up to sign, J =

xy

  

J = sin 

yz

  + cos  cot    

J = cos 

xz

  − sin  cot   

(8.40)

Since the coordinates  and  are defined inside the spheres, we can use them as coordinates in the whole Riemann space. Let us denote the two remaining coordinates t and r. We shall now solve the Killing equations for the metric tensor g t r  , where x0 = t, x1 = r, x2 = , x3 = , with the Killing vectors given by (8.40), thus k  =  3  1

k = sin   2 + cos  cot   3  2

k = cos  2 − sin  cot  3

(8.41)

3

Note that in assuming the form (8.41) of the Killing vectors for the whole Riemann space we have tacitly made one more assumption. Namely, we assumed that the   coordinates on different spheres are correlated in such a way that the rotation of the whole space is described by the same formula as the rotation of a single sphere. One can easily find examples of coordinate systems that do not obey this condition. For example, suppose that we choose the r  coordinates in the E2 plane so that the curves r = constant are non-concentric circles, and the azimuthal angle is measured on each circle independently, beginning from a certain reference direction chosen to be  = 0. In such coordinates, the rotation of the plane by the angle 

84

Symmetries of Riemann spaces

will not be described by  =  + ; the  will in general be a nonlinear function of r and , which will reduce to  +  only on that circle whose centre coincides with the centre of rotation of the plane (and such a circle will not necessarily exist). As another example of an untypical coordinate system, we may choose the ‘generalised spherical coordinates’ in the Euclidean space E3 , in which the surfaces r = constant will be concentric spheres, but the poles of the spherical coordinates on different spheres will not lie on a straight line. A rotation by the angle  around an axis will be described by  =  +  only on that sphere whose pole lies on the axis. On other spheres the rotation will be given by a complicated function of r,  and , and the generators will not have the form (8.40).

We should thus expect that the Killing equations for (8.41) will give us not only a limitation on the geometrical properties of the space, but also a limitation on the coordinate systems resulting from the assumed form of generators (8.40). We shall come back to this question – see the paragraph containing (8.53). The Killing equations for the vector k reduce to g3 = 0, that is, the whole metric 1

tensor is independent of x3 = . For k and k the Killing equations reduce to 2

sin 

cos 

3

 g + sin  g2 + sin  g2   + cos  cot  g3 + cos  cot  g3 = 0

(8.42)

 g + cos  g2 + cos  g2   − sin  cot  g3 − sin  cot  g3 = 0

(8.43)

In order to simplify further calculations, we will replace these equations by two combinations thereof. Multiply (8.42) by cos , (8.43) by sin  and subtract one result from the other. Using the two identities sin sin  + cos cos  ≡ 0 cos sin  − sin cos  ≡ 

(8.44)

we obtain  g2 +  g2 + cot  g3 + cot  g3 = 0

(8.45)

Now multiply (8.42) by sin , multiply (8.43) by cos , and add the results. Using (8.44) again, we obtain  (8.46) g −  cot g3 −  cot g3 = 0   Equation (8.45) is algebraic. Taking consecutively the various values of the indices  and , we obtain from it the following results: • For 2 =  = 3, 2 =  = 3 the equation is fulfilled identically. • For 2 =  = 3,  = 2: g3 = 0

 = 0 1

(8.47)

g2 = 0

 = 0 1

(8.48)

• For 2 =  = 3  = 3:

8.9 Spherically symmetric 4-dimensional Riemann spaces

85

• For  = 2  = 2: g23 + g32 ≡ 2g23 = 0

(8.49)

g33 = g22 sin2 

(8.50)

• For  = 2  = 3: • For  =  = 3 Eq. (8.50) follows once more. Now we take the same cases for Eq. (8.46) and obtain the following: • • • • • •

For For For For For For

2 =  = 3 2 =  = 3  /g = 0   = 0 1. 2 =  = 3  = 2 an identity as a consequence of (8.48). 2 =  = 3  = 3 an identity as a consequence of (8.47).  = 2  = 2  /g22 = 0.  = 2,  = 3 an identity as a consequence of (8.49).  =  = 3 an identity as a consequence of (8.50).

Hence, finally, the solution of (8.45)–(8.46) is   ds2 = t rdt2 + 2t rdt dr + t rdr 2 + t r d 2 + sin2  d2

(8.51)

This is the general 4-dimensional spherically symmetric metric form. Note that, in consequence of the 2-spheres being subspaces of the Riemann space (they are the orbits of the symmetry group), we have obtained a limitation on the signature: the signs of d 2 and of d2 must be the same. This is an illustration of the remark made in Section 7.15 on embedding the Riemann spaces in spaces of higher dimension: an inconsistency between the signatures may render the embedding impossible. Note that we have not assumed anything about the subspaces of the variables t r. Hence, arbitrary nonsingular coordinate transformations can be carried out within those subspaces: t = ft   r  

r = gt  r  

(8.52)

where f and g are arbitrary functions subject to the condition that t r/t   r   = 0. After such a transformation the function t r will preserve its value, while   and  will change to combinations of   and , but the combinations will still depend only on t and r  . Now we can illustrate the remarks made after (8.41). We can carry out a coordinate transformation on (8.51) that does not obey (8.52), for example r = r  + h 

(8.53)

where h  is an arbitrary function. The result will be ds2 = t rdt2 + 2t rdt dr  + 2t rh dt d + 2t rh dt d +t rdr  + 2t rh dr  d + 2t rh dr  d   + t r + t rh 2 d 2 + 2t rh h d d   + t r sin2  + t rh 2 d2 2

(8.54)

86

Symmetries of Riemann spaces

(note that both r and r  are present here; r  is one of the coordinates, while r is the function defined by (8.53)). The metric (8.54) is still spherically symmetric because it resulted from (8.51) by a coordinate transformation, and the existence of symmetries does not depend on the coordinates. Nevertheless, Eq. (8.54) is not of the form (8.51) because after the transformation (8.53) the spherical coordinates on different spheres t = constant r = constant are not correlated in the simple way implicit in (8.41).

The orbits of the group O3 are the subspaces r= constant whose  t2= constant 2 2 2 metric form, in the coordinates of (8.51), is ds2 =  d + sin  d (in these subspaces  is constant). The centre of symmetry is where t r = 0. However, there is no guarantee that such a point exists within the manifold. For example, if  is constant throughout the Riemann space (which is a property invariant under (8.52)), then the centre of symmetry does not exist. This is an analogy to a cylinder or a one-sheeted hyperboloid: these surfaces are rotationally symmetric, but no point on the surface is the centre of rotation. If the functions    and  in (8.51) are independent of r, then there exists a fourth Killing field k =  1 . The symmetry group of such spacetimes is called the Kantowski– 4

Sachs symmetry (Kantowski and Sachs, 1966). In these spacetimes those hypersurfaces t = constant for which t = 0 have no centre of symmetry. We will come back to them in Chapter 10.

8.10 * Conformal Killing fields and their finite basis If, after a coordinate transformation, the new expression for the metric tensor is conformally equivalent to the old one, then such a transformation is called a conformal symmetry of the Riemann space (and of the metric). The generators of these transformations are called conformal Killing vectors and obey the equations k g + k  g + k  g ≡ k + k = g 

(8.55)

where  is a scalar function. By a similar method to that in Section 8.4 one can show that for the Riemann spaces of dimension n > 2 a finite basis of generators of conformal symmetries always exists; i.e. that the dimension of the group of conformal symmetries is finite if n > 2. (We shall deal with the case n = 2 at the end of this section – then, no finite basis exists since all 2-dimensional Riemann spaces are conformally equivalent.) Contracting both sides of (8.55) with g  we obtain =

2  k  n 

(8.56)

From the Ricci identities we obtain (8.19) and (8.20) again, but this time instead of (8.18) we have −k = k − g

(8.57)

Hence, using (8.55) and g = 0 in (8.20), we obtain k + k + k =

 1  g +  g +  g 2

(8.58)

8.10 * Conformal Killing fields and their finite basis

87

From (8.57) and (8.58):  1 − g +  g +  g 2 To the first two terms we now apply the Ricci formula, and we obtain k = k − k +

(8.59)

 1 (8.60) − g +  g +  g 2 The second derivatives of the conformal Killing fields are thus determined by the fields k themselves and by the gradient of . The first derivatives of the generators are connected by Eqs. (8.55) that determine the symmetric part of the matrix k . Hence, in order to know the first derivatives of k , we have to know the antisymmetric part of k , i.e. 21 nn − 1 function values, plus the value of . Together with k and  this makes k = R  k +

1 1 nn − 1 + n + n + 1 = n + 1n + 2 2 2 constants that must be known in order to calculate k . Now take the covariant derivative of (8.60) with the index : k = R  k + R  k +

 1 − g +  g +  g 2

(8.61)

(8.62)

From this, we subtract the corresponding expression with the indices  interchanged, and we apply the Ricci formula on the left-hand side: R k + R k = R k − R k + R k − R  k +

 1 − g +  g +  g −  g 2

(8.63)

If (8.63) is solvable with respect to  , then the second derivatives of  will be determined by k and k . In that case, to calculate the third derivatives of k from (8.62) we need to know only those constants that were counted in (8.61). In order to find  from (8.63), we contract it with g  : R    k − R  k = −R  k − R    k − R  k − R    k  1 (8.64) −n − 2 −g   2 The first term on the left and the last term containing curvature on the right can be combined as follows:   R    k + R    k = R    k + k = R    g = R (8.65) +

Now using (8.65), we rewrite (8.64) as follows: n − 2 +g   = −2R + R  k − 2R  k −2R    k − 2R  k

(8.66)

88

Symmetries of Riemann spaces

We contract this with g  and obtain n − 1  = −R − 2R  k = −R − R k (8.67)   1   (in the second step we used the contracted Bianchi identities R − 2 g R  ≡ 0). From here we substitute for   in (8.66) and obtain n − 2 =

  1 g R + R k − 2R + 2R  k n−1 −2R  k − 2R    k − 2R  k

(8.68)

(It can be verified, with use of (7.15) and (8.55), that the right-hand side of (8.68) is symmetric in  and .) Hence, for n > 2, the second derivatives of  are determined by k  k and  itself. Thus,    k and k determine k  k and  , and, consequently, determine all higher derivatives of k and . Then, the functions k x and x are determined in that neighbourhood of the point investigated within which these functions are analytic.1 Consequently, with n > 2, the conformal symmetry transformation can have at most 21 n + 1n + 2 parameters, i.e. a finite basis of generators exists. Note that 21 n + 1n + 2 is at the same time the maximal dimension of the isometry group of an n + 1-dimensional manifold. It remains to verify the subcase n = 2. Then, from (7.61) we obtain: 1  R  = R 2 

1 R  = R  2 (8.69)  1         R   = g g R  = R g g −   2 After substituting these in (8.68) we obtain the identity 0 ≡ 0. Hence, for 2-dimensional surfaces, the only limitation that follows from (8.66) is (8.67). But (8.66) is just one consequence of (8.63), which was the full integrability condition of (8.62). Hence, we must now reconsider (8.63). In two dimensions, every object that is antisymmetric in two indices must be proportional to the Levi-Civita symbol. Since the last parenthesis in (8.63) is antisymmetric in both  and  , the following must hold: − g +  g +  g −  g =  

(8.70)

Contracting this with   and using  = gg  g   we obtain  = −g 

(8.71)

Now substituting (8.70), (8.71) and (8.69) in (8.63) gives:    g R  k + g R k − g R k  + g R k    −g R  k + g R k = −g   

1

(8.72)

The argument presented in the next section applies to conformal symmetries as well, so this limitation on the number of conformal symmetries applies also for non-analytic functions.

8.11 * The maximal dimension of an invariance group

89

The left-hand side above is antisymmetric in  . Using (8.55) one can verify that it is also antisymmetric in  . Hence, (8.72) will hold if the contractions of both sides of it with   are equal. Doing this contraction and using again  = gg  g   we obtain R k + Rk  = − 

(8.73)

Comparing this with (8.56) in the case n = 2 we see that (8.73) is equivalent to (8.67). Consequently, the only integrability condition of (8.62) is (8.67). This equation is of the type of d’Alembert equation that puts a limit only on 1 1 + 2 2 , leaving 11 and 12 undetermined. Hence, when differentiated, Eq. (8.62) will produce still higher derivatives of . Let us also note the form of (8.62) in the case n = 2: 

    1 1 (8.74) k  = g  − g +  g +  g   Rk  + 2 2 Both sides of this are covariant derivatives of some expressions, and subsequent differentiations of them will have their integrability conditions identically fulfilled. In order to determine  and k we will thus need an infinite number of constants, i.e. no finite basis of the conformal Killing fields exists in two dimensions. This is a consequence of the fact that every 2-dimensional metric is conformally flat, so there exists an infinite family of transformations preserving the explicitly conformally flat representation of the metric.

8.11 * The maximal dimension of an invariance group In Section 8.4 we proved that the dimension of the symmetry group of an n-dimensional Riemann space cannot be larger than 21 nn + 1. However, in the proof we assumed that the Riemann tensor was analytic in the neighbourhood considered. We will argue now that the result applies generally. It will follow from the sequence of theorems presented below. Theorem 8.1 Assumptions: (1) The metric tensor g of the Riemann space Vn depends on a number of constant def

parameters u = u1   uk . (2) The metric h results from g when some of the parameters go to certain limits, thus def

u0 = u10   ui0  ui+1   uk 

h = lim g  u→u0

(8.75)

where i ≤ k. (3) The limit is non-singular, i.e. no vector field defined on Vn becomes identically zero in the limit. Thesis: The dimension of the symmetry group of h is larger than or equal to the dimension of the symmetry group of g .

90

Symmetries of Riemann spaces

Proof: Let k   k be the generators of symmetries of g , and consider the equations £ g = 1

km

p

0 m = 1  p. Since they are fulfilled at all values of the parameters u1   uk , they must still hold in the limit. Since the limit is nonsingular, none of the generators will become zero in the limit. Hence, h must inherit all the symmetries of g . Comments: (a) Limits of metric tensors are coordinate-dependent, but the theorem holds for every nonsingular limit. (b) New symmetries may appear in the limit if there exists a vector field w on Vn such that £g = 0 but limu→u0 £g = 0. w

w

(c) The structure of the symmetry group H of h may be different from the structure of the symmetry group G of g , even if dim H = dim G. This may happen because some of the structure constants of G may become zero or take other privileged values in the limit. (d) The theorem holds for invariance groups of any tensor fields, not just for isometries. Thus, for example, the group of invariance transformations of the Riemann tensor (called collineations) may only increase or preserve its dimension in a limit. (e) The theorem holds for conformal symmetries, too. Theorem 8.2 The flat Riemann space is contained as a limit in every nonsingular region of every curved Riemann space. Proof: For any Riemann space, the flat space of the corresponding signature is its tangent space. Thus, since in a nonsingular region the tangent space exists at every point, we may imagine the flat limit as follows: we decrease the curvature to zero (this may require introducing some free parameters by a coordinate transformation), and in the process open subsets of the tangent spaces become isometric with open subsets of the manifold itself. Comments: (a) This theorem is in fact one of the fundamental postulates of relativity. In the physical language it reads as follows: special relativity is the zero-curvature limit of general relativity, i.e. every curved spacetime has the Minkowski spacetime as a limit. (b) The construction will fail at singular points, where the curvature is infinite (such as the vertex of a cone). At those points, no tangent space exists. (c) In general, we do not expect the tangent spaces at different points to coincide in the limit. For example, a cylinder is flat, but its tangent planes do not coincide. Theorem 8.3 No Riemann space can have a symmetry group of higher dimension than the flat Riemann space, i.e. of more dimensions than 21 nn + 1.

8.12 Exercises

91

Proof: The proof follows from Theorems 8.1 and 8.2 and from the result of Exercise 10. Comment: There exist Riemann spaces whose symmetry groups have exactly 21 nn + 1 parameters, and which are not locally isometric to the flat space. They are the spaces of constant curvature, with the Riemann tensor R  = R  . Their symmetry groups are different (not isomorphic) in each of the three cases R > 0 R = 0 and R < 0. In relativity, they are the de Sitter spacetimes, see Exercise 12 and Section 14.4.

8.12 Exercises 1. Find the coordinate transformation corresponding to the field of generators k =  0 , where 0 is the label of one of the coordinates. 2. Find the coordinate transformation corresponding to the field of generators k = xi  j − xj  i , where i and j are the labels of fixed coordinates. Show that, when xi  xj  are Cartesian coordinates, the transformation found here is the rotation in the plane of xi  xj . 3. Solve the Killing equations for k =  0 . 4. Show that if the parameter  of the integral lines of a generator k = dx /d is chosen as a coordinate in the Riemann space, then a tensor invariant under the transformations generated by k is simply independent of . 5. Show that if there exist at least two linearly independent fields k and l generating invariances of a tensor field T , then the corresponding orbit parameters  and  can be chosen as coordinates on Mn , if and only if k l  = k l  −l k  = 0. In that case T / = T / = 0. Note: This is just a different wording of Exercise 2 in Chapter 6. 6. Prove that if k and l are Killing fields in a certain Riemann space, then so is their commutator k l  . 7. Show that the condition of invariance of a scalar field  with respect to the transformation group generated by the vector field k is k  = 0

(8.76)

8. Show that the condition of invariance of a covariant vector field  with respect to the transformation group generated by k is k  + k   = 0

(8.77)

9. Prove that the conformal Killing vectors obey (8.55) and that  is related to the conformal  factor in g x  = x g x  by  = k  .  Hint. Take first the conformal condition g x  = x g x  and note that x  are functions of the group parameters ti . Then take the limit of this equation as ti → t0i , where x  t0i  x = x , i.e. is an identity transformation. It follows that must obey x x =x = 1. 10. Find and interpret all the Killing fields for the Minkowski spacetime in the Cartesian coordinates, in which ds2 = dt2 − dx2 − dy2 − dz2 . Find the corresponding isometries. Identify the isometries that should be known to you from a course on special relativity: the special Lorentz transformations along the x-, y- and z-directions, and the rotations in the planes x y, y z

92

Symmetries of Riemann spaces

and x z. Verify that they are indeed isometries (i.e. substitute these transformations into the metric form and see what happens). Calculate all the structure constants of the full group. 11. Find all the conformal Killing fields for the Minkowski spacetime in the Cartesian coordinates, in which ds2 = dt2 − dx2 − dy2 − dz2 . Show that those generators that do not correspond to isometries generate the following mappings of the Minkowski spacetime into itself: (a) Dilatation: x = x /C

(8.78)

where C is the group parameter. (b) The so-called acceleration transformations (for which Pleba´nski proposed the name ‘Haantjes transformations’ (Haantjes, 1937, 1940))1 : x =

x + C  x x  1 + 2C x + C C  x x

(8.79)

where C    = 0 1 2 3, are group parameters, and the indices are raised and lowered by the Minkowski metric. Verify that this is an Abelian group, that the composition of two Haantjes transformations, with parameters C  and D , is a Haantjes transformation with parameters C  + D , and that the transformation inverse to (8.79) is a Haantjes transformation with parameters  C  = −C  . Verify that (8.79) is a composition of the following three transformations: • the inversion in the pseudosphere of radius L with its centre at x = 0: L2  x  x x

(8.80)

x = x + C  

(8.81)

x = • translation by the vector C  :

• the inversion in the pseudosphere of radius L with its centre at x = 0: x =

L2 x x  x

(8.82)

The transformations (8.80) and (8.82) are discrete conformal symmetries of the Minkowski spacetime in Cartesian coordinates, and (8.81) is a conformal symmetry of the Minkowski spacetime in the coordinates x . Verify that the Haantjes transformations are conformal symmetries also for a flat space of any dimension and with any signature. Equations (8.79)–(8.82) apply then with the indices running through n values. Hint. Verify first that (8.79) has the following properties: x x = x  x /T

1

dx dx = dx  dx /T 2  

(8.83)

The papers by Haantjes (1937) contain only special cases of (8.79), corresponding to iC C  = 0 (the 1937 paper) and ii only one of the parameters C  being nonzero (the 1940 paper). The oldest source known to us in which (8.79) is given in full generality is the text by Pleba´nski (1967).

8.12 Exercises

93

where def

T = 1 + 2C x + C C  x x

(8.84)

12. One of the coordinate representations of 4-dimensional spaces of constant curvature with the signature + − −− (the de Sitter (1917) spacetimes) is   ds2 = 1 − !r 2 dt2 −

  1 dr 2 − r 2 d 2 + sin2  d2  2 1 − !r

(8.85)

where ! is an arbitrary constant. Find all the Killing fields for this metric, in each of the cases ! > 0, ! < 0 and ! = 0 (the last case is just the Minkowski spacetime in spherical coordinates). Find the structure constants of these groups. Take the limit ! → 0 of the first and second cases and see what happens with the structure constants. Hint. You may prefer to find the Killing fields for the case ! = 0 by transforming the results of Exercise 10 to spherical coordinates.

9 Methods to calculate the curvature quickly – Cartan forms and algebraic computer programs

9.1 The basis of differential forms Let us recall the conclusion of Section 4.3: if a field of bases of contravariant (covariant) vectors is given on a manifold, then this field determines the dual field of bases of covariant (contravariant) vectors via (4.13) or (4.14), and then both bases can be used to uniquely represent arbitrary tensor densities by sets of scalars. In Chapter 4 we assumed the bases to be given, but they could be arbitrary. We are thus allowed to choose such a basis that the set of scalars representing a given tensor field is particularly simple. For example, the scalars representing the metric tensor ij = ei  ej  g

(9.1)

(where i and j label different vectors) can all be constant. This is possible for any g : the transition from g to ij is equivalent, in the language of linear algebra, to a transformation of the matrix of a quadratic form induced by a change of basis of the underlying vector space. Equation (9.1) does not determine the basis uniquely, but up to the transformations that preserve ij . For example, when dim Vn = 3 and ij  = diag1 1 1, the ei  are determined up to the orthogonal transformations O(3), and when dim Vn = 4 and ij  = diag+1 −1 −1 −1, the ei  are determined up to the Lorentz transformations L(1,3). A given basis ei  and a given scalar image of the metric ij uniquely determine the metric tensor by a formula inverse to (9.1): g = ei  ej  ij 

(9.2)

In a 4-dimensional manifold, the basis ei  is called a tetrad of vector fields, and the scalar image of the metric ij is called a tetrad metric. As already shown in Section 3.2, every coordinate system naturally defines a field of vector bases; they are the vectors orthogonal to the hypersurfaces f i = constant, defined by ei  f i  = 1

ei  f j  = 0

for j = i

(9.3)

(with no summation over i in the first equation), where f j  j = 1    n are the coordinates. However, not every field of bases defines a coordinate system because vector fields 94

9.2 The connection forms

95

are in general not orthogonal to families of hypersurfaces. For general fields, Eqs. (9.3) will not be integrable. Covariant fields ei  can be uniquely represented by differential forms ei = ei  dx 

(9.4)

Multiplying both sides of this equation by ei  and using (4.13), we obtain dx = ei  ei 

(9.5)

From (9.2) and (9.4) we see that the metric can be represented in the basis ei in the following way: ds2 = g dx dx = ij ei ej 

(9.6)

9.2 The connection forms The quantities def

 i jk = − ei  ej ek 

(9.7)

are called the Ricci rotation coefficients. Comparing this with Eq. (4.19) for the Christoffel symbols we find    i i  jk = e  ej  ek  − ei  ej  ek   (9.8)  

  = ei  ej  ek   i jk + ei  ei   

(9.9)

The basis vectors and the Ricci rotation coefficients are thus a unique representation of the Christoffel symbols. Now let us calculate the exterior derivative of the forms ei : dei = −ei  dx ∧ dx = −ei   ej  ek  ej ∧ ek =  i jk ej ∧ ek

(9.10)

(along the way, we have used the antisymmetry of the exterior products and the symmetry of the Christoffel symbols in their subscripts that allowed us to replace ei  with ei   ). Hence, calculating all dei and then decomposing the result in the basis ej ∧ ek we find the def  i jk . Now we will show that ijk = is  s jk are antisymmetric in ij by virtue of their definition. Note that  i jk can be equivalently written as  i jk = ei ej  ek  

(9.11)

Note also that the following is true: ei  = is g es 

ei  = is g  es 

(9.12)

96

Quick calculation of curvature

To see this, multiply both sides of the first equation by ej  , to obtain ei  ej  = i j , which means that the ei  defined by (9.12) are identical with the inverse matrices to ei  , i.e. with the ei  as originally defined by (4.13) and (4.14). Our notation is thus self-consistent: the ei  result from the ei  by raising the scalar index with ij and lowering the tensor index with g (where ij is the inverse matrix to ij ). The second equation in (9.12) is verified in a similar way. Now let us calculate the directional derivatives of (9.1) along ek  :     0 = ij  ek  = ei  ej  g  ek  = ei   ej  g ek  + ei  ej   g ek  = ei   g  js es g ek  + g  is es ej   g ek  = js ei  es ek  + is ej  es ek  = jik + ijk 

(9.13)

(Along the way we used: ij being constant, the ei  ej  g being scalars, g being covariantly constant, Eqs. (9.12), the equation g  g =   and (9.11).) The final result is as announced: ijk = −jik 

(9.14)

Using this property, one may easily verify that ijk = ijk − jik − kij 

(9.15)

Thus, having found  i jk from (9.10), we can find the full  i jk = is sjk from the above. We now use the Ricci rotation coefficients to form differential 1-forms called connection forms:  i j =  i jk ek 

(9.16)

The tetrad image of the covariant derivative of any tensor field can be expressed fully in terms of the Ricci rotation coefficients in place of the Christoffel symbols and directional derivatives in place of partial derivatives. Thus, for example, for the Riemann tensor ea  eb  ec  ed  ee  R   ≡ ee Ra bcd + a se Rs bcd −  s be Ra scd −  s ce Ra bsd −  s de Ra bcs 

(9.17)

9.3 The Riemann tensor The expression d j +  s ∧  i

i

s j

is a 2-form that can be decomposed in the basis ek ∧ el :

1 d i j +  i s ∧  s j = Ri jkl ek ∧ el  2

(9.18)

This is a definition of the coefficients Ri jkl , but they turn out to be the scalar image of the Riemann tensor Ri jkl = ei  ej  ek  el  R  

(9.19)

9.3 The Riemann tensor

97

This is verified as follows:   d i j +  i s ∧  s j = d  i jk ek +  i sk  s jl ek ∧ el   = − i jk el  +  i js  s kl +  i sk  s jl ek ∧ el 

(9.20)

where we have used (9.16), (9.10), the antisymmetry of the exterior product and (9.5). Hence, from (9.18) and (9.20) we obtain: 1 i R = − i jk el  +  i js  s kl +  i sk  s jl  2 jkl

(9.21)

Now, using (9.8) and (6.4), we obtain (9.19). It is now easy to verify that def

Rjl = Ri jil ≡ ej  el  R 

(9.22)

i.e. that the Rjl defined above is the scalar image of the Ricci tensor R given by (7.46). It is also easy to see that the scalar curvature is R = ij Rij ≡ g  R 

(9.23)

The differential forms allow us to carry out many calculations faster and easier than the traditional tensor calculus. Indeed, some modern courses of relativity avoid tensor calculus altogether, using the Cartan forms as a primary device. However, that approach, although more efficient from the point of view of calculations, makes it more difficult to explain the historical roots of relativity. As examples of the great simplifications to which the Cartan forms lead, let us note that the identity R  ≡ 0 is an immediate consequence of (9.10). Since the antisymmetrisation in (9.10) is carried out automatically (it was written out explicitly only for better clarity), we can make use of (9.16) and write (9.10) in the form dei = − i j ∧ ej 

(9.24)

Substituting (9.24) and (9.18) in the identity d2 ei ≡ 0 we obtain 21 Ri jkl ej ∧ ek ∧ el ≡ 0, which is equivalent to Ri jkl ≡ 0. This identity is thus the integrability condition for (9.24). Similarly, the Bianchi identities (7.15) are obtained as the integrability condition of (9.18). In relativity, with its 4-dimensional Riemann spaces of signature + − −−, the most frequently used tetrads are: the orthonormal one (in which ij  = diag+1 −1 −1 −1), the null tetrad (in which 01 = 10 = 1 22 = 33 = −1, all other components of  are zero) and the double-null tetrad (in which 01 = 10 = −23 = −32 = 1, all other components of  are zero). See Sections 16.5 and 16.6 for an application of the double-null tetrad; in it the forms e3 and e4 are complex and conjugate to each other.

98

Quick calculation of curvature

9.4 Using computers to calculate the curvature Calculating the curvature tensor from a given metric tensor is tedious and time-consuming, and seemingly innocent errors made along the way cause great chaos in the final results. In order to obtain a reliable result, every step of the calculation must be carefully verified. A relatively simple calculation typically takes several hours; in complicated cases it can extend to months. At the same time, this is routine work that does not really require intelligence, but just careful application of a set of rules. (Intelligence is required only to understand the rules.) Consequently, it has all the typical features of a task for a computer. This fact was noticed and made use of long ago. Over the last 40 years, several computer systems have been created that can calculate the Riemann tensor and the associated quantities from a given metric. (We mean here symbolic calculations, in which the computer just transforms mathematical expressions, without expecting them to have numerical values.) Some of those systems are parts of big general-purpose algebraic systems (like Maple or Mathematica), some are specialised programs written in generally accessible programming languages. The language of choice for computer algebra is Lisp. Among the specialised programs that are still available are Sheep, created in Stockholm, and Ortocartan, written by one of the authors of this text (Krasi´nski, 2001b). Information on them is best obtained from the Internet (the expression to look for is ‘computer algebra’). The modern computer algebra programs are fairly easy to use, and the reduction in time and effort required to do the calculation is dramatic. Instead of doing routine calculations for weeks, one can have the result in less than a minute. Of course, this does not include the time required to write the data, and usually several runs are needed before the result becomes acceptable (for example, additional simplifications might be needed). Still, the gain is obvious, and these calculations are done ‘by hand’ essentially only by students for educational purposes. In research work, the computers have taken over the field completely.

9.5 Exercises 1. Verify Eq. (9.17). 2. Calculate the exterior derivative of (9.18) and show that it is equivalent to the Bianchi identities (7.15). 3. Take a simple metric, for example the de Sitter metric of Eq. (8.85), and calculate the Riemann tensor first by tensor calculus, then by using the Cartan forms in the orthonormal tetrad. Compare the time and effort required in the two cases. Verify Eq. (9.19).

10 The spatially homogeneous Bianchi type spacetimes

10.1 The Bianchi classification of 3-dimensional Lie algebras As already mentioned, generators of symmetries of a manifold form a Lie algebra. For reasons to be explained further, the case when this algebra is 3-dimensional is important for relativity. The aim of the Bianchi classification is to sort out those 3-dimensional algebras which are inequivalent in the following sense. A basis of generators is not defined uniquely. If ki is a basis, then 

def  k = Ai j k i 

sum over j

(10.1)

j

is also a basis, provided that the matrix Ai j (of constant elements) is non-singular. Such a change of basis induces the following change of the structure constants:  l   Cil j  = A−1 l Ai i Aj  j C l ij 

(10.2)

Thus, two sets of structure constants that are related by (10.2) correspond to two bases that span isomorphic algebras. How can one recognise whether any matrix A obeying (10.2) exists for two given sets of C l ij ? The answer is provided by the Bianchi classification. Note that no reference will be made in this section to the way in which the corresponding group acts on the manifold. The method of presentation used here was invented by Schücking in the 1950s, but introduced only during a seminar talk. It diffused into public knowledge via notes taken by Kundt that were published only recently (Kundt, 2003); see Krasi´nski et al. (2003) for a description of the story. The earliest papers that used this approach and that introduced it into the literature were by Estabrook, Wahlquist and Behr (1968), Ellis and MacCallum (1969) and by MacCallum and Ellis (1970). The classification was originally introduced by Bianchi (1898), but his method requires a long presentation and is no longer in use.1 Bianchi sorted out the different types by the properties of the derived algebras.

1

Bianchi’s classification was considered from the point of view of the theory of Lie algebras. Its importance for relativity was recognised much later. The first paper that explicitly introduced the Bianchi types into relativity was that by Taub (1951), but the inspiration is said to have come from Gödel (1949). See Jantzen (2001) for more on this story.

99

100

The spatially homogeneous Bianchi type spacetimes

From (8.30) it follows that C l ij = −C l ji , so for an N -dimensional group the number of structure constants cannot exceed N · 21 NN − 1. Through the Jacobi identity  k  k  k  +  k  k  k  +  k  k  k  = 0 i j

l

j l

i

l i

(10.3)

j

the definition (8.30) implies a further limitation on C l ij : C m ij C n ml + C m jl C n mi + C m li C n mj = 0

(10.4)

We shall take (10.4) into account later. For N = 3 21 N 2 N − 1 = 9 and equals the number of elements of a general 3 × 3 matrix. Thus for a 3-dimensional algebra all structure constants can be put into a single 3 × 3 matrix, let us call it H ab . The one-to-one correspondence between C l ij and the elements of H ab is 1 H ab = akl C b kl ⇐⇒ C i jk = sjk H si  (10.5) 2 where akl and sjk are the Levi-Civita symbols. The matrix H ab can now be split into its symmetric part  1  ab def nab = H ab = (10.6) H + H ba 2 and its antisymmetric part H ab . But in a 3-dimensional space there is a one-to-one correspondence between antisymmetric matrices and vectors, so H ab can be represented by the vector a defined by 1 ai = − ijk H jk ⇐⇒ H ij = − ijm am  2 From (10.5)–(10.7) we have C l jk = sjk nsl − lm jk am 

(10.7)

(10.8)

The identity (10.4) for N = 3 may be written as C m ij C n ml ijl = 0, and with use of (10.8) this implies that nis as = 0

(10.9)

i.e. either ai = 0 or else nis has at least one zero eigenvalue. From (10.1) and (10.2) it is seen that nab will transform, under the change of basis (10.1), like a twice contravariant tensor density  i  j    n˜ i j = det A−1 A−1 i A−1 j nij  (10.10) while ai will transform like a covariant vector, a˜ i = Ai i ai . The transformations (10.10) can be used to diagonalise nij . Let us then assume that the basis k was chosen appropriately i

and that nij is of the form

⎞ n1 0 0 ⎟ ⎜ nij = ⎝ 0 n2 0 ⎠  0 0 n3 ⎛

(10.11)

10.1 The Bianchi classification

101

This does not yet fix the basis uniquely; transformations that permute n1  n2  n3  are still allowed. Therefore, if any of the ni is zero, it can always be moved by transformations of the basis to the upper left corner in (10.11), i.e. we can always assume that n1 = 0

if

ai = 0

(10.12)

If n1 = 0 is the single zero eigenvalue, then in view of (10.9) the vector a will assume, after such a choice of basis, the form ai = a 0 0

(10.13)

If n1 = 0 is a multiple eigenvalue, then (10.12) still allows us to rotate a within the eigenspace of the n1 = 0 eigenvalue. We can then rotate a so that it will assume the form (10.13). Equation (10.13) covers the subcase ai = 0. In such a basis, (10.9) becomes an1 = 0

(10.14)

l

Using all the information about C ij , the commutators become:  k  k  = a k + n3 k  1 2

2

3

 k  k  = n1 k  2 3

 k  k  = n2 k − a k  3 1

2

(10.15)

1

(10.16)

3

This form of the commutation relations was obtained using rotations of the basis vector fields k . From now on, no further rotations are allowed, but we may still scale k i

i

without changing their directions, k = Ci k (no sum). After such a scaling, (10.15)–(10.16) i

i

change to k k =

a C3 n k k+ C1 2 C1 C2 3 3

k k =

C2 a n k− k C1 C3 2 2 C1 3

1 2

3 1

k k = 2 3

C1 n k C2 C3 1 1

(10.17) (10.18)

(primes were dropped for clarity). We now want to use these scalings to simplify a, n1 , n2 and n3 . Using C1 , C2 and C3 we can scale those of the parameters a n1  n2  n3  that are nonzero. A nonzero value can never be made zero by scaling. Hence, the preliminary classification is as shown in Table 10.1, where S stands for ‘something’ (different from zero). However, not all the entries in Table 10.1 are inequivalent. Permutations of the basis vectors that do not violate (10.14) are still allowed. Clearly, any permutation of n1  n2  n3  is allowed when a = 0, and with a = 0 we are still allowed to permute n2 and n3 . Hence, only the cases indicated in the last line of the table have a chance to be inequivalent. We will see that the classification of the algebras into inequivalent types does not match the columns of Table 10.1 – the table will serve merely to make the presentation orderly. The labels for the types were introduced by Bianchi (1898), who, as already mentioned, used a different method. By tradition, his numbering is still in use, although it does not seem natural in the derivation presented below.

102

The spatially homogeneous Bianchi type spacetimes

Table 10.1 A preliminary Bianchi classification a n1 n2 n3 Case number

0 0 0 0 1

0 0 0 S /

0 0 S 0 /

0 0 S S /

0 S 0 0 2

0 S 0 S /

0 S S 0 3

0 S S S 4

S 0 0 0 5

S 0 0 S 6

S 0 S 0 /

S 0 S S 7

Let us consider the consecutive columns of Table 10.1. a = n1 = n2 = n3 = 0. This is Bianchi type I where all commutators are zero. (2) a = n2 = n3 = 0, n1 = 0. Taking C1 = C2 C3 /n1 we obtain n1 = 1. This is Bianchi type II. (3) a = n3 = 0, n1 = 0 = n2 . Taking C1 = C2 C3 /n1 we obtain n1 = 1. However, as seen from (10.17)–(10.18), we have then n2 = n1 n2 /C3 2 and we will not be able to change the sign of n2 by choice of C3 . Therefore we must consider two cases: (3a) n1 n2 > 0. Then we take C3 = n1 n2 1/2 and obtain n2 = 1. This is a subcase of Bianchi’s type VII. Bianchi himself called it type VII1 ; today it is called type VII0 . (3b) n1 n2 < 0. Then we take C3 = −n1 n2 1/2 and obtain n2 = −1. This is a subcase of Bianchi’s type VI, called today VI0 . Bianchi noted that this case requires a separate treatment, but the final result fits well within the general type VI, so he did not give it any special name. (4) a = 0, n1 n2 n3 = 0. We take C1 = C2 C3 /n1 and obtain n1 = 1. But then, as before, n2 = n1 n2 /C3 2 , and the two signs of n1 n2 have to be considered separately.

(1)

(4a) n1 n2 > 0. We take C3 = n1 n2 1/2 and obtain n2 = 1. However, n3 = n1 n3 /C2 2 , and two further subcases arise: (4a1 ) n1 n3 > 0. Then we take C2 = n1 n3 1/2 and obtain n3 = 1. Thus finally n1 = n2 = n3 = 1, a = 0. This is Bianchi type IX. 4a2 ) n1 n3 < 0. Then we take C2 = −n1 n3 1/2 and obtain n3 = −1. Hence finally n1 = n2 = 1 = −n3 . This is Bianchi type VIII. (4b) n1 n2 < 0. We then take C3 = −n1 n2 1/2 and obtain n2 = −1. But then we must again consider the same two subcases as before for C2 :

10.1 The Bianchi classification

103

(4b1 ) n1 n3 > 0. Then we take C2 = n1 n3 1/2 and obtain n3 = 1. Through the basis change (still allowed!)

 k k 3 2

 =  k  − k 2

3

we then obtain the same parameter values as in case (4a2 ). (4b2 ) n1 n3 < 0. Then we take C2 = −n1 n3 1/2 and obtain n3 = −1. Again, through the basis change      k k k = −k−k−k  1 3 2

3

2

1

we arrive back at case (4a2 ). (5) a = 0, n1 = n2 = n3 = 0. Taking C1 = a we obtain a = 1. This is Bianchi type V. (6) a = 0 = n3 , n1 = n2 = 0. We take a = C1 , C3 = aC2 /n3 and obtain a = 1 = n3 . This is Bianchi type IV. (7) an2 n3 = 0, n1 = 0. Taking C2 = C1 C3 /n2 we obtain n2 = 1. We lose again the possibility of changing the sign of n3 = n2 n3 /C1 2 and must consider two cases: (7a) n2 n3 > 0. Then we take C1 = n2 n3 1/2 and obtain n3 = 1. Since, however, we fix C1 in this way, we have no possibility left to scale a. Hence, with n3 = 1, the value of a remains arbitrary. Then the algebras corresponding to n2 = n3 = 1 but different values of a are not equivalent. Bianchi called this case VII2 , but, as opposed to previous types, this is a one-parameter family of inequivalent types. With a = 0, an algebra equivalent to the one obtained in (3a) results. This is seen if, with a = 0, we carry out the basis change

 k k 1 3

 =  k  − k  3

1

The general type VII, with a = 0, is today denoted VIIh . (7b) n2 n3 < 0. Then we take C1 = −n2 n3 1/2 and obtain n3 1 = −1. Just as before, we are left then with no possibility of changing a. Again, this is a one-parameter family of inequivalent types. Bianchi denoted it type VI; today it is denoted VIh . With a = 0, the algebra obtained in (3b) results, i.e. type VI0 . To see this, the same basis change as in (7a) is necessary.

104

The spatially homogeneous Bianchi type spacetimes

Table 10.2 The Bianchi classification a n1 n2 n3 Bianchi type

0 0 0 0 I

0 1 0 0 II

0 1 1 0 VII0

0 1 −1 0 VI0

0 1 1 1 IX

0 1 1 −1 VIII

1 0 0 0 V

1 0 0 1 IV

a 0 1 1 VIIh

a 0 1 −1 VIh

1 0 1 −1 III

In Bianchi’s scheme the subcase of type VI corresponding to a = 1 emerged as a separate type which he called type III. In it, a = n2 = 1 = −n3 , n1 = 0. The final classification is shown in Table 10.2.

10.2 The dimension of the group versus the dimension of the orbit In Section 8.2 we defined the orbits of one-parameter families of mappings. At this point it should be clear that the notion of an orbit can be defined also for a family (or group) of mappings that has several parameters; such orbits can be multidimensional curved spaces. Let us recall that the Bianchi classification was done without any reference to the way in which the generators act on the manifold Mn . Two situations are possible: 1. The three generators (which are by definition linearly independent as vector fields) may also be linearly independent as vectors at each single point of Mn . This happens e.g. for generators of translations in R3 . 2. The three generators may be linearly dependent at each single point of Mn . This happens e.g. for the generators of the group O(3), which is a 3-dimensional group, but has 2-dimensional orbits. A 3-dimensional isometry group cannot have 1-dimensional orbits (from the Killing equations, if the orbits are 1-dimensional, then any two generators will be proportional to each other with a constant factor). If the orbits are 2-dimensional, then their curvature is characterised by one scalar that must be invariant under the action of the group, i.e. constant. The constant curvature may be positive (the orbits are then 2-dimensional spheres), zero (the orbits are then 2-planes) or negative (such a surface has, in polar coordinates, the metric ds2 = 1 + a2 r 2 −1 dr 2 + r 2 d2 , but cannot be embedded in the R3 with a positive-definite Euclidean metric). Then, the three algebras of generators are of Bianchi types IX, VII0 and VIII, respectively. If a 3-dimensional group has 3-dimensional orbits, then the scalar curvature of the orbits must also be constant. However, in three dimensions the scalar curvature does not fully characterise the curvature of space; there exists also the Ricci tensor. Therefore more geometries are possible; they will be briefly discussed in Section 10.6.

10.4 Groups acting transitively, homogeneous spaces

105

10.3 Action of a group on a manifold If a 3-dimensional group of mappings of Mn into itself has 3-dimensional orbits, then several situations are possible, e.g. the following: 1. The mappings may or may not be symmetries of Mn (they could be, for example, conformal symmetries of Mn ). 2. The orbits may be timelike, spacelike or null hypersurfaces in Mn . In each situation one can consider the various Bianchi types. Examples of solutions of Einstein’s equations are known for which the orbits are timelike (e.g. Krasi´nski (1974) for Bianchi type I and Krasi´nski (1998 and 2001a) for more general types; in the 1998 and 2001a papers there are examples of null orbits). A systematic investigation of all the spacetimes with 3-dimensional timelike orbits of the Bianchi groups was done by Harness (1982). Examples are also known in which 3-dimensional groups act as groups of symmetries on certain preferred 3-dimensional submanifolds of Mn , but are not symmetries of the whole Mn (these are the so-called spacetimes with intrinsic symmetries (Collins, 1979); for examples see Krasi´nski (1981) and Wolf (1985)). A brief discussion of general properties of spacetimes for which a 3-dimensional symmetry group has 3-dimensional null orbits is given in Stephani et al. (2003, Section 24.2). A systematic investigation was done of the case when the group has 3-dimensional spacelike orbits and the group transformations are conformal symmetries of the manifold with the conformal factor  in £g = g k

being constant (these are the so-called self-similar spacetimes (Eardley 1974a)). Most effort went into investigating the case when the 3-dimensional orbits are spacelike and the group in question is a group of symmetries of Mn (but examples are known where the orbits are spacelike in one part of Mn and timelike elsewhere; see Collins and Wainwright (1983) and Collins and Ellis (1979)). Before we consider this case in more detail, a few definitions must be given.

10.4 Groups acting transitively, homogeneous spaces Let Orb(p, G) denote the orbit of the point p ∈ Mn under the action of the group G. We say that G acts transitively on a manifold S when, for every q ∈ S, Orbq G = S (in further considerations S will be a submanifold of Mn ). Examples: The group O(3) acts transitively on the surface of a sphere, the group of arbitrary translations in Rn acts transitively on Rn . The space S on which G acts transitively is called homogeneous with respect to G. If, for every q ∈ S (assumed homogeneous with respect to G) there exists a subgroup H ⊂ G such that Hq = q, then G is said to act multiply transitively on S. A group acting transitively, but not multiply, acts simply transitively. Examples: The group of arbitrary translations in Rn acts simply transitively on Rn , the group O(3) acts multiply transitively on a 2-sphere since each point p of the sphere remains unchanged by rotations around the axis which passes through p.

106

The spatially homogeneous Bianchi type spacetimes

A 4-dimensional manifold Mn with the metric tensor g of signature + − −− is called a spatially homogeneous spacetime of Bianchi type if it has the following properties: 1. It has a 3-dimensional symmetry group G. 2. The orbits of the group are spacelike hypersurfaces in Mn on which G acts simply transitively. A Bianchi-type spacetime may have a larger symmetry group; the definition requires then that the full symmetry group has a 3-dimensional subgroup that acts simply transitively on spacelike hypersurfaces.

10.5 Invariant vector fields As noted in Section 8.5, the vector field X is invariant under the group of transformations generated by the vector field k if £X ≡ k X = 0

(10.19)

k

Now let X be a vector field on S, let k  i = 1    m be a set of generators of invariances i m

is a basis in the tangent space to S at of X such that, at every point p ∈ S k p i

i=1

p (i.e. the orbits of the group generated by k are m-dimensional and so is S). In that i

case the matrix K where Ki  = k  p is non-singular at every p ∈ S, and so defines the i

inverse matrix . Let us write (10.19) for all the fields k : i

k X   −X  k  = 0 i

(10.20)

i

and multiply this set of equations by the matrix . The result will be X   − i k  X  = 0 i

sum over i

(10.21)

This formula is similar to the condition of covariant constancy of a vector field, where the quantity def

G  = − i k  i

sum over i

(10.22)

plays the role of the affine connection. Let us follow this analogy and calculate the curvature tensor defined by G  . It turns out to be equal to zero. Therefore Eq. (10.21) defines a transport of the vector field X along the vector fields k that is formally analogous i

to the parallel transport on S and has vanishing curvature. Consequently, the transport is path-independent. Thus, if Xp is defined at any single point p ∈ S, then (10.21) will uniquely define X at any other point of S.

10.5 Invariant vector fields

107

We can then define a vector basis X p at p ∈ S i = 1    m, and use Eq. (10.21) i

(called the Lie transport) to transplant the basis to all other point of S. The vector fields X on S thus obtained will be automatically invariant with respect to the transformations i

generated by the fields k . We have thus proven: i

Theorem 10.1 If a set of vector fields k on S exists such that k p form a basis of the i

i

tangent space to S at each p ∈ S, then there exists a set of vector fields X on S that are i

invariant under the group of transformations generated by k and also form a basis at i

each p ∈ S.

Now let us assume in addition that all the fields ki are Killing fields, and let us calculate the Lie derivatives along ki of the quantities def

gjk = X  X g 

(10.23)

j k

where g is the metric tensor on S. Since X are invariant, we have £ X = 0, and since k i

i

j

k are now Killing fields, we have £k g = 0, and so £k gjk = 0. But gjk are scalars,

i

i

i

so from (8.76) it follows that 0 = £ gjk = k gjk k i

(10.24)

i

and, since k form a basis, this means that gjk are constants. i

If X and X are invariant, then so is X  X . Since X p form a basis at every p ∈ S, it i

j

i j

i

follows that X  X  can be decomposed in this basis, i j

X  X  = Dl ij X  i j

(10.25)

l

where the scalar coefficients Dl ij could be expected to depend on the point p. However, calculating the Lie derivative of (10.25) along k , using the invariance of X  X  and of X , i j

i

l

and using the fact that X form a basis at each p ∈ S, we conclude that Dl ij are constants. l

The basis X was defined by choosing X p0  arbitrarily at a p0 ∈ S and transporting it i

i

off p0 by (10.21). Let us assume then that at p0 we have X  p0  = k p0 . In this case it i

i

can be proven that Dl ij = −C l ij 

(10.26)

where C l ij are the structure constants defined by the commutators of k . A hint for the i

proof: since both k and X are bases at every p ∈ S and k = X at p0 , there exists a i

i

i

i

108

The spatially homogeneous Bianchi type spacetimes

matrix Mx (point-dependent!) such that X  = Mi j k (sum over j) and Mi j p0  = i j . i

j

Knowing this, play with the commutators at p0 . (Without the condition Mi j p0  = ji the constants Dl ij would be linear combinations of the C l ij .)

10.6 The metrics of the Bianchi-type spacetimes Let k be the three Killing fields required by the definition, and let xI be the coordinates i

in the homogeneous hypersurfaces i I = 1 2 3. The homogeneous hypersurfaces are tangent to k (by definition) and uniquely define i

the vector field m orthogonal to them, m = g −1/2   k k k 

(10.27)

1 2 3

  where g = det g . Let us choose the parameter on the integral lines of m as the t-coordinate in Mn : m = x /t. Since m is orthogonal to all k , in such coordinates we i

have g0I = 0

(10.28)

From the 00 component of the Killing equations, using (10.28) and k0 = 0, we further i  obtain kI g00I = 0, i.e. g00 = g00 t. By the next transformation, t = g00 tdt, we i

obtain (dropping the prime) ds2 = dt2 − gIJ dxI dxJ 

(10.29)

From the 0 i, i = 1 2 3, components of the Killing equations we then conclude that kI 0 = 0 and that k are Killing fields also for the 3-metric gIJ . Since for the homogeneous i

i

hypersurfaces with the 3-metric gIJ the fields k form a basis at each point, we can i

apply the results of Section 10.5 to each single hypersurface. Here, Eq. (10.24) will read kR gjkR = 0, but /tgjk is not determined. Consequently, the gjk will be i

functions of t. Let us denote by i I the matrix inverse to X I (where X are the vector i

i

fields invariant with respect to the transformations generated by k ); then, from (10.23): i

gIJ = gjk tj I k J

(10.30)

ds2 = dt2 − gjk tj I k J dxI dxJ 

(10.31)

and

In order to find i I one has to construct the Killing fields and their invariant fields for each Bianchi type separately. The resulting formulae can be found e.g. in Stephani et al. (2003, Chapters 13 and 14, in particular Table 13.4 and p. 209).

10.7 The Robertson–Walker spacetimes

109

10.7 The isotropic Bianchi-type (Robertson–Walker) spacetimes In astrophysics, such Bianchi-type spacetimes are important that are not only spatially homogeneous but also spherically symmetric (isotropic). We shall deal with their (astro)physical implications in Chapter 17. Here, we will only derive the appropriate metric form. The form (8.51) of the metric is preserved by the transformations t = ft  r   r = gt  r   which can be used to simplify (8.51) further. In order to transform (8.51) into the form (10.31), we can choose f and g so that the new = 0. In the new form, only those transformations will be permissible which preserve the hypersurfaces t = constant. They are t = ft  r = gr  . In agreement with (10.29),  should then depend only on t and be transformable to 1. So, finally, a spherically symmetric metric can possibly be homogeneous in the Bianchi sense only if it can be put in the form   ds2 = dt2 + t rdr 2 + t r d 2 + sin2  d2  (10.32) With such a metric one should now solve the Killing equations. We will present the solution and give hints on how to derive it later in this section. Some properties of the solution can be guessed in advance. The spacetime with the metric (10.32) has O(3) as a symmetry group. Since O(3) has 2-dimensional orbits, it cannot be the homogeneity group H existing in the Bianchi-type spacetimes. Hence, the full symmetry group must contain O(3) and H as two subgroups. O(3) cannot be a subgroup of H because it acts multiply transitively. O(3) and H cannot have any common 2-dimensional subgroup because O(3) has no 2-dimensional subgroups at all. All 1-dimensional subgroups of O(3) are rotations around an axis, which act multiply transitively and so cannot be subgroups of H. Thus, O(3) and H cannot have any common subgroup apart from the identity transformation. Hence, the full symmetry group will have at least six parameters, three of them connected with O(3) and three with H. On the other hand, we showed in Section 8.4 that an n-dimensional manifold can have a symmetry group of at most 21 nn + 1 parameters, i.e. at most six when n = 3. Consequently, the spatially homogeneous and isotropic spacetimes have symmetry groups with exactly six parameters. We shall now indicate how to solve the Killing equations for the metric (10.32). The calculation is laborious, but uses only routine mathematics. We recall (see Section 10.6) that in a general Bianchi-type spacetime the Killing fields have no time-component k0 = 0, while the components (00) and 0 i i = 1 2 3, of the Killing equations have already been solved with the result kI t = 0 I = 1 2 3. (We could proceed without using this information, but then among the solutions there would be those with 4-dimensional orbits of the symmetry group – the Minkowski and de Sitter metrics – that are just subcases of the Bianchi spacetimes.) The remaining Killing equations are k1 r + 2k1 r  = 0

(10.33)

k r + k   = 0

(10.34)

2

1

110

The spatially homogeneous Bianchi type spacetimes

k3 r sin2  + k1   = 0

(10.35)

k r + 2k  = 0

(10.36)

k3  sin2  + k2  = 0

(10.37)

k1 r + 2k2 cot  + 2k3  = 0

(10.38)

1

2

We seek solutions with the physical signature + − −−, so  < 0 and < 0. We also demand that k1 = 0, for otherwise the orbits of the symmetry group would come out 2-dimensional, contrary to a basic property of the Bianchi-type spacetimes. The set (10.33)–(10.38) is overdetermined, so, whichever equation we solve first, the solution will be further limited by the remaining equations. Limitations are thereby imposed not only on the Killing fields, but also on the metric components  and . Along the way, some of the equations lead to alternatives of the type ab = 0 =⇒ a = 0 or b = 0, and this is where the special cases appear. One of the special solutions that emerge is the metric1   ds2 = dt2 − R2 t dr 2 − S 2 t d 2 + sin2  d2  (10.39) whose generators of symmetries are J =

1

  r

J = cos 

  − sin  cot    

J = sin 

  + cos  cot    

2

3

J =

4

  

(10.40)

The generators J  J and J generate the O(3) group that was assumed from the beginning. 2 3

4

The four-parameter group generated by all of (10.40) has 3-dimensional orbits, and has no three-parameter simply transitive subgroup. This is because O(3) alone has 2-dimensional orbits and so cannot be simply transitive, and has no 2-dimensional subgroups that could be combined with the transformations generated by J into a three-parameter group. 1

Hence, (10.39) does not belong among the Bianchi-type spacetimes. It is a metric of the Kantowski–Sachs (1966) class.2 The generic solution of (10.33)–(10.38) is J = −V cos 

1

  + W sin   r 

J = V sin  cos 

2

1 2

  sin   + W cos  cos  −W  r  sin  

A transformation of the r-coordinate is required to achieve the form (10.39). Metrics with the Kantowski–Sachs symmetry have a longer history than most people suspect. A generalisation of such a metric first appeared in a paper by Datt (1938), but the author instantly dismissed it as unphysical. Some physical properties of the metrics (10.39) were investigated by Kompaneets and Chernov (1964). The symmetry was noted and investigated by Kantowski (1965), and became a classical piece of knowledge after the paper by Kantowski and Sachs (1966). The geometric properties of the Datt metric were first investigated by Ruban (1968, 1969). See the reprints of the Datt (1938), Kantowski (1965) and Ruban papers for more on this story.

10.7 The Robertson–Walker spacetimes

J = V sin  sin 

3

 cos    + W cos  sin  +W  r  sin  

J = cos 

  − cot  sin    

J = sin 

  + cot  cos    

4

5

111

  

(10.41)

1 def Vr = 1 + kr 2  4

(10.42)

 2  2  2 2 2 2 dr + r d + sin  d 

(10.43)

J =−

6

where 1 1 − kr r 4 The metric with these symmetries is def

Wr =

R2 t

ds2 = dt2 − 

1 + 41 kr 2

where Rt is an arbitrary function and k is an arbitrary constant. Special cases of this metric form, corresponding to k > 0 and k < 0, were first derived, by a rather loose argument, by Friedmann (1922), who thus became, unknowingly, the father of modern cosmology. (He died long before he could witness his success.) A mathematically rigorous derivation, by methods different from ours, and with all signs of k included, was given independently by Robertson (1929, 1933) and Walker (1935). The metric form (10.43) is thus frequently called the Robertson–Walker metric. Other names attached to it in various combinations are Friedmann and Lemaître, but those refer to various special cases of (10.43); we shall come back to this point in Chapter 17. The last three generators in (10.41) are easily recognised as those of O(3). We shall def

use the abbreviation i j =  J  J . The commutators are i j

1 2 = k J

4

1 3 = k J

2 3 = k J

1 4 = − J

2 4 = J

3 4 = 0

1 5 = − J

2 5 = 0

3 5 = J

5

2

3

6

1

1

1 6 = 0

2 6 = − J

3 6 = J

4 5 = J

4 6 = − J

5 6 = J 

6

3

5

(10.44)

2

4

The last three commutators are those of the algebra of O(3). In (10.44) such relations should be found that correspond to the Bianchi algebras. However, the Bianchi classification introduced standard bases, and (10.41) may contain transformed generators. Indeed, some of the Bianchi bases are linear combinations of (10.41).

112

The spatially homogeneous Bianchi type spacetimes

In the standard Bianchi bases, the nonzero structure constants were scaled to +1 or −1 whenever possible. Thus, for comparing (10.44) with (10.15)–(10.16) and Table 10.2, we have to scale out k in (10.44); the scaling is       J  J  J = k J  J  J  1 2 3

1 2 3

with other generators unchanged. The result is as if k = −1 when k < 0 and k = +1 when k > 0. The formulae below show the scaled generators, with tildes omitted. For k > 0, the Bianchi sub-basis is of type IX:    1 1 1   (10.45) = + = − = + L L J J J J J J  L 2 1 6 2 2 5 2 3 4 1 2 3 The new generators are determined up to arbitrary orthogonal transformations because the matrix nij has a triple eigenvalue. For k < 0, two Bianchi algebras are found in (10.41), one of type V: L = −J 

1

L = J +J

1

2

2

L = J +J

4

3

3

(10.46)

5

and one of type VIIh : l = −a J + J 

1

1

6

l = J +J 2

2

4

l = J +J 3

3



For k = 0, two standard Bianchi bases are contained in (10.41): 

type I and J  J  J of Bianchi type VII0 .

(10.47)

5

JJJ

of Bianchi

1 2 3

1 2 4

It is easy to verify that the examples of bases shown are indeed the standard Bianchi bases of the types indicated. It is, however, more difficult to prove that only these Bianchi algebras are contained in (10.41). This fact was apparently first discovered by Grishchuk (1967). The relation between the symmetries of (10.33) and the possible Bianchi groups is discussed in more detail in Ellis and MacCallum (1969).

10.8 Exercises 1. Verify that the curvature defined by (10.22) is indeed zero. 2. Verify Eq. (10.26). 3. Since the invariant fields are defined by  k  X = 0 and the k do not depend on t, we can i

i

solve this set assuming that X are independent of t. However, a general solution does depend on time. Show that the time-dependent fields are X I t = Bj k tX I t0 , where t0 is an initial j

k

value and Bj k t is a nonsingular 3 × 3 matrix. Hence, the time dependence can be hidden in r s  gjk t = grs tB−1 j B−1 k , and we can use X I t0  as the new invariant fields. Hint. Show first that if X is an invariant field, then so is dX/dt, and thus can be decomposed in the basis of the invariant fields.

11 * The Petrov classification by the spinor method

11.1 What is a spinor? Spinors are tensor densities in a 2-dimensional vector space over the body of complex numbers. A covariant 1-spinor A is a covariant vector that has two complex components.   When the basis in the vector space is transformed by eA = LA A eA  A A = 1 2, the A transforms by   A A = L−1 A A  (11.1) In the body of complex numbers, we have to consider the complex conjugation, which reduces to identity when applied to real numbers. Consequently, a new classification of objects, in addition to that into covariant and contravariant, has to be introduced: some spinors transform linearly, some transform antilinearly under a change of basis.   A Antilinearly means that L−1 A A appears in the transformation law instead of L−1 A ; the overbar denotes complex conjugation. Indices of objects that transform antilinearly are marked by an overdot, thus A = A˙ 

(11.2) ˙

The same spinor may have all four kinds of indices, for example  AB CD ˙ . The spinor methods are used here as an auxiliary tool for just one task. However, spinors are a powerful tool that often makes complicated problems miraculously simple. A useful brief introduction to spinors in relativity is the paper by Penrose (1960); extended treatments can be found in Penrose and Rindler (1984) and Pleba´nski (1974). There is no metric in the space of spinors; indices are raised and lowered by the ˙ Levi-Civita symbols AB˙  A˙ B˙  AB and AB . Since AB is antisymmetric, a convention on manipulating indices has to be fixed. We adopt the convention that subscripts go before superscripts, and the dummy indices must be made adjacent (Pleba´nski, 1974), so  A = S SA 

A = AS  S 

(11.3)

and similarly for dotted indices. Because of the antisymmetry and of the convention, the following are true: A A = − A A 

 A A ≡ 0 113

∀ A 

(11.4)

114

* The Petrov classification by the spinor method

11.2 Translating spinors to tensors and vice versa Spinors will be used here to represent tensors in a 4-dimensional spacetime of signature ˙ + − −−. We introduce four Hermitean 2 × 2 Pauli matrices g AB that are a basis of the space of 2 × 2 complex matrices. With respect to the index they transform like components of a contravariant vector; with respect to the other two indices they transform as spinors with one contravariant antilinear index and one contravariant linear index. We will find below that we must in fact require that the Pauli matrices are spinor densities. The fact that they are Hermitean means that ˙

˙

˙ g AB ≡ g AB = g BA 

(11.5)

The dotted indices label rows, the non-dotted ones label columns of the matrix. The spinor image of a covariant vector v is defined as follows: ˙

˙

vAB = v g AB 

(11.6)

˙ AB

The v is a Hermitean spinor (density! – see below), and a scalar with respect to ˙ coordinate transformations on the manifold. Since the g AB are a basis in the space of ˙ complex 2 × 2 matrices, the coefficients of decomposition of vAB in that basis are uniquely ˙ determined, so there must be an inverse linear mapping from vAB to v ; we denote it 1 ˙ AB v = g AB ˙ v  2

(11.7) ˙

Since this must hold for arbitrary vectors v and spinors vAB , the Pauli matrices and their reciprocal matrices g AB ˙ must obey 1 1 ˙ ˙ ˙ g ˙ g AB = A C˙ B D  (11.8) g ˙ g AB =   2 CD 2 AB This notation is consistent: the reciprocal Pauli matrices are obtained from the proper Pauli matrices by lowering the tensor index with a metric and by lowering the spinor indices with the Levi-Civita symbols. The following objects may be formed out of the Pauli matrices: 1 ˙ ˙ (11.9)   ˙ ˙ g RA g SB  2 AB RS   1 ˙ ˙ ˙ ˙ S AB = R˙ S˙ g RA g SB − g RA g SB  (11.10) 2 The first object coincides with the metric tensor. We would like the metric to be a scalar with respect to spinor transformations. Because the Levi-Civita symbols are not spinors, but densities of weight w = 1 and w ˙ = 1, the Pauli matrices must be taken to be spinor densities of weights w = w ˙ = −1/2. This is a convention that defines how the Pauli matrices will be transformed under a change of basis. The object S AB is called a spin-tensor. It is a proper spinor (not a density), and it has the following properties:

 =

S AB = S  AB = S AB 

(11.11)

11.2 Translating spinors to tensors and vice versa

115

It can be used to transform tensors antisymmetric in two indices into spinors (symmetric in two indices). Two other properties are: i S AB = √  ··  S  AB  2 −g S

˙ B˙

A

i ˙˙ = − √  ··  S  AB  2 −g

(11.12)

  where g = det g  . (The dots in  denote the places from which the indices were lowered. Since  and ··· are tensor densities of different weights, the covariant one is not equal to the contravariant one with lowered indices.) The first property means that the spin tensor is self-dual, the second property means that the complex-conjugate spin-tensor is anti-self-dual. A further property follows: S AB S C˙ D˙ = 0

(11.13)

The spinor image of a null vector has a special property. Let k be a null vector, ˙ AB k k = 0. From (11.8) this implies that the spinor image has then the property kAB 0. ˙ k =   AB ˙ ˙  AB But because of the Levi-Civita symbols used to manipulate indices, kAB = 2 det k . ˙ k A Hermitean matrix whose determinant is zero has the property kAB ˙ = kA ˙ kB , i.e. there exists a spinor with one index kA that obeys this. Hence, the spinor image of a null vector is a spinor with one index. (Note: the kA is determined only up to the phase, i.e. kA and ei kA , where is a real function, determine the same null vector field k .) The Pauli matrices could be defined as just any basis of Hermitean 2 × 2 matrices. By tradition, for the flat Minkowski manifold, the Pauli matrices are defined as follows:    

1 0 0 1 0 −i 1 0 ˙ iAB g =     (11.14) 0 1 1 0 i 0 0 −1

The Minkowski metric ij is contained as the background in every curved spacetime; one can always find a set of vectors ei , i = 0 1 2 3, such that g  ei ej  = ij (see Chapter 9). Thus, vectors from the Minkowski space can always be transformed into the corresponding vector fields in a curved spacetime by the mapping defined by the matrices ei . The image of the vector vi of the Minkowski spacetime in the curved spacetime with metric g  is v = ei vi . Consequently, the Pauli matrices for a curved spacetime with the metric g  are defined by ˙

˙

g AB = ei g iAB  Example. For the metric (the Schwarzschild metric)    2m 1 dt2 − dr 2 − r 2 d 2 + sin2  d2 ds2 = 1 − r 1 − 2m/r

(11.15)

116

* The Petrov classification by the spinor method

the basis of orthonormal contravariant vectors that maps this metric onto the Minkowski metric is (indices number vectors, not their components)       2m 1 e0 = 1 1 − 2m  0 0 0  e = 0 1 −  0 0  r r e2 = 0 0 1/r 0 

e3 = 0 0 0 1/r sin  

11.3 The spinor image of the Weyl tensor The spinor image of the Weyl tensor is defined as follows: CABCD =

1  S AB S  CD C   64

(11.16)

Because of the properties of S  AB and C  , the following is true: S  AB S  C˙ D˙ C  ≡ 0

(11.17)

Now one of the miraculous properties of spinors shows up: all the complicated symmetries and antisymmetries of the Weyl tensor C  translate into one simple property of CABCD : it is symmetric in all its indices, CABCD = CABCD 

(11.18)

Because of (11.17), the inverse mapping to (11.16) is quite simple: ˙˙

˙ ˙

C  = S  AB S CD CABCD + S  AB S C D CA˙ B˙ C˙ D˙ 

(11.19)

11.4 The Petrov classification in the spinor representation Consider the following 4-linear form: 

 2

 = CABCD  A  B  C  D 

(11.20)

where  A =  1   is an arbitrary spinor. Assume that  1 = 0 and let z =  2 / 1 . Then  4  =  1 P4 z, where P4 z is a polynomial of 4th degree. It has four complex roots, and so can be factorised:  4  =  1 a z1 − z z2 − z z3 − z z4 − z      = A  A A  A A  A A  A  (11.21) where z1  z2  z3  z4  are the roots of P4 , and the spinors  A  A  A  A  are defined by the above equation, for example A = az1 1  −a2 , A = z2 1  −2 , etc. Hence, finally: CABCD  A  B  C  D = A B C D  A  B  C  D = A B C D  A  B  C  D 

(11.22)

Since the spinor  A was arbitrary, this means that CABCD = A B C D

(11.23)

11.5 The Weyl spinor represented as a 3 × 3 complex matrix

117

degree of the minimal equation

3 3

2 2

1 [-]

1 number of eigenvalues

Fig. 11.1. The Petrov classification by the spinor method. Arrows show possible specialisations.

(thanks to the total symmetry of CABCD , no bit of information was lost in considering the form (11.20)). The quantities  A  B  C  D  are called the principal spinors of the Weyl tensor, also Debever spinors. In a 2-dimensional space, only two of these spinors can be linearly independent, but we can ask how many pairs of linearly independent spinors can be chosen from this set. There are six different cases: (I) no two Debever spinors are collinear; (II) exactly two Debever spinors are collinear; (III) three Debever spinors are collinear; (D) two Debever spinors are collinear, the two others are collinear, too, but these pairs are distinct; (N) all four Debever spinors are collinear; (0) the Weyl tensor is identically zero. We have denoted the different cases by the same symbols as the Petrov types because these are exactly the Petrov types. This approach was first introduced by Penrose (1960). The resulting diagram can be drawn in a more illustrative way than in Section 7.16; see Fig. 11.1. It remains to prove that this is indeed the same classification. First, however, we shall determine some other algebraic properties of the Weyl spinor. 11.5 The Weyl spinor represented as a 3 × 3 complex matrix Now let us interpret the Weyl spinor CABCD as a 3 × 3 complex matrix:  def  C = C AB CD  

(11.24)

whose elements will be labelled by the ‘superindices’ AB and CD. Each ‘superindex’ takes three values: AB = 11 12 22. In the set of such matrices, the unit matrix has components   I =  A C B D   (11.25)

118

* The Petrov classification by the spinor method

Since CABCD is symmetric in all indices, and indices are raised by AB , the matrix C is trace-free. Consider the characteristic equation for the matrix C, det C − I = 0. As can be verified using (3.38), for a 3 × 3 matrix, the characteristic equation is 3 + Tr C2 +

  1 Tr C2 − Tr C 2  − detC I = 0 2

(11.26)

Since for the Weyl ‘supermatrix’ Tr C = 0, this simplifies to 3 −

1   2  Tr C  − detC I = 0 2

(11.27)

The Hamilton–Cayley equation for C is thus C3 −

1   2  Tr C C − detC I = 0 2

(11.28)

The property Tr C = 0 has one more consequence: Again using (3.38) in three dimensions, we obtain for C 1   detC = Tr C 3  (11.29) 3 In the equations below we will use the following shorthand notation: def

  = A A ≡ − A A = −    Using Eq. (11.23) and the above notation, we find for Tr C 2 :   1  Tr C 2 =    +    +  2 24 − 4    

(11.30)

(11.31)

The general formula for the determinant is too unwieldy, but we will not need it in the most general case. When two Debever spinors, say A and A , are collinear, A = A , the determinant is 1   1 1 3 detC = Tr C 3 ≡ C AB CD C CD EF C EF AB = − (11.32)  3  3  3 3 108   In the same special case, the formula for Tr C 2 simplifies to   1 Tr C 2 = 2 2  2  6

(11.33)

Knowing all this, we can now verify that the following is true. • In general, Eq. (11.27) has three different roots, so Eq. (11.28) is the minimal equation, of degree 3. • When two of the Debever spinors are collinear, say A = A , Eqs. (11.32) and (11.33) apply, and (11.28) becomes  a 2  a  def C− I (11.34) C + I = 0 a =   6 3

11.6 Penrose classes versus Petrov classes

119

With no further limitations on the Debever spinors, this is still the minimal equation, but there are only two distinct eigenvalues here. A A A A • When  2  =  and  =  (three Debever spinors are collinear), we have Tr C = detC = 0, and (11.28) becomes C 3 = 0

(11.35)

With no further limitations on the Debever spinors, this is the minimal equation, and the only eigenvalue is 0, triply degenerate. • When A = A and  A =  A (i.e. the Debever spinors  A  A  are collinear and  A  A  are collinear, but these two pairs are distinct), Eqs. (11.32) and (11.33) simplify further to detC = −

1 3 3    6  108

  1 Tr C 2 = 2 2  4  6

Now Eq. (11.28) becomes   b b 2 C + I = 0 C− I 6 3

def

b =  2 

but the minimal equation here is of degree 2:   b b C − I C + I = 0 6 3

(11.36)

(11.37)

(11.38)

In verifying this, Eq. (11.25) is helpful and so is the following observation: in two dimensions, every spinor with two indices that is antisymmetric must be proportional to the corresponding Levi-Civita symbol, e.g. A B − B A = xAB . Contracting this with AB we find x = − . In consequence, we also have A B − B A = −  A B . • When all four Debever spinors are collinear, thus A =  A ,  A =  A and A =  A , Eq. (11.35) still holds, but the minimal equation is obtained from (11.38) and it is C 2 = 0. • When C = 0, this is the minimal equation. In this way, we have verified all the information in Figs. 7.3 and 11.1.

11.6 The equivalence of the Penrose classes to the Petrov classes It remains to verify that the algebraic types found by the Penrose (1960) method in this chapter coincide with those found by the Ehlers–Kundt (1962) method used in Section 7.16. For this purpose, recall the formula   = g −1 g  g g g  

(11.39)

120

* The Petrov classification by the spinor method

Using this, together with (11.19), (11.12) and (7.97)–(7.99), we find Q  = E  + iH  ˙˙

˙ ˙

= S  AB u S CD u CABCD + S  AB u S C D u CA˙ B˙ C˙ D˙ i · ·  − √   S AB S CD u u CABCD 2 −g i ˙ ˙ · ·  − √   S A˙ B˙ S C D u u CA˙ B˙ C˙ D˙ 2 −g    ˙˙ ˙ ˙ = 2 u S  AB u S C D CA˙ B˙ C˙ D˙  (11.40)   ˙˙ The quantity u S  AB is in effect a 3 × 3 matrix. It has one symmetric ‘superindex’ ˙ B ˙ A  that takes  three values, and it obeys (because of antisymmetry in  ) the identity ˙˙

u u S  AB ≡ 0; hence it operates in the 3-dimensional hypersurface element orthogonal to u in the space of tensors. Consequently, the tensor index takes values in a   ˙ B˙ A  provides an invertible linear mapping from the 3-dimensional space. Thus, u S  complex vector space V1 of vectors labelled by AB to the complex vector space V2 of vectors labelled by the index . Equation (11.40) is the corresponding bilinear mapping of matrices over V1 to matrices over V2 . Such mappings preserve the eigenvalues and other invariants of matrices. Hence, the classification by the Penrose method is equivalent to that by the Ehlers–Kundt method.

11.7 The Petrov classification by the Debever method The spinor image of the Weyl tensor has the following properties: • In the completely general case, each of the Debever spinors obeys

A B C D CABCD ≡ 0

(11.41)

A CBCDE F ≡ 0

(11.42)

C

D

Both equations are easy to verify using (11.23). • For type II, the nondegenerate Debever spinors obey (11.41)–(11.42), while the preferred (double) Debever spinor A obeys

A B C CABCD ≡ 0

(11.43)

A CBCDE C D ≡ 0

(11.44)

• For type D, each of the (double) Debever spinors A and A obeys (11.43) and (11.44). • For type III, the nondegenerate Debever spinor obeys (11.41)–(11.42), while the preferred (triple) Debever spinor A obeys

A B CABCD ≡ 0

(11.45)

11.7 The Petrov classification by the Debever method

121

• For type N, the only existing (quadruple) Debever spinor A obeys

A CABCD ≡ 0

(11.46)

In order to express these properties in the tensor language, we must observe that the spin-tensor has the following property: ˙˙

S AB S  AB + S A˙ B˙ S  AB = 4 

 

(11.47)

This can be verified using the Hermitean property of the Pauli matrices. Thus, using the spin-tensor, we may uniquely represent any antisymmetric second-rank tensor T  by its (symmetric) spinor image  1  AB ˙˙ (11.48) S T  = TAB + S AB TA˙ B˙  TAB = S AB T   8 In particular, T  ≡ 0 if and only if TAB ≡ 0. Knowing this, let def 1 ˙ B A k = gAB ˙

2

(11.49)

be the null vector defined by the Debever spinor and calculate k C k  k k 

(11.50)

The calculation is long and tedious, and the result is that this quantity is always zero. The null vector k defined by (11.49) is called a Debever vector. In verifying that (11.50) is zero, one must calculate S AB S  CD k C k k k 

(11.51)

express the Weyl tensor C through its spinor image by (11.19), use the complete symmetry of CABCD , and use the following: 1 1 P˙ P˙ SEF k = − gPE ˙ F − gPF ˙ E  2 2   ˙ ˙ B

SA S AB gPE + A E g SB  ˙ = −P˙ S˙ E g

(11.52) (11.53)

In the end, the first part of (11.19) will give zero contribution because it will create ˙ factors like P˙ P˙ ≡ 0, while the second part will be proportional to C E˙ F˙ GH˙ E˙ F˙ G˙ H˙ , which is zero by virtue of (11.41). The quantity (11.50) vanishes even in the most general case (Petrov type I). With more special Petrov types, the vanishing quantity becomes progressively simpler. Specifically: • For Petrov type II, each of the three nondegenerate Debever vectors obeys k C k  k k = 0

(11.54)

122

* The Petrov classification by the spinor method

but the Debever vector that is the tensor image of the double Debever spinor obeys k C k k = 0

(11.55)

by virtue of (11.43) and its complex conjugate. • For Petrov type D, both Debever vectors obey (11.55). • For Petrov type III, the tensor image of the nondegenerate Debever spinor obeys (11.54), while the tensor image of the triple Debever spinor obeys C k k = 0

(11.56)

by virtue of (11.45) and its complex conjugate. • For Petrov type N, the only existing Debever vector obeys C k = 0

(11.57)

by virtue of (11.45) and its complex conjugate. The method of verification is similar in each case. For (11.55), we calculate S AB k C k k = 0, whereas for (11.56) and (11.57) we only express C , k and k through their spinor images. This approach to the Petrov classification was introduced by Debever (1959, 1964).

11.8 Exercises ˙

AB 1. Show that the reciprocal Pauli matrices g AB by ˙ result from the proper Pauli matrices g lowering the tensor index with the metric and lowering the spinor indices with A˙ B˙ and AB . 2. Prove that the  defined by (11.9) is equal to the metric tensor. 3. Verify that the spin-tensor is symmetric in its spinorial indices. 4. Verify Eqs. (11.12) and (11.13). 5. Prove that a Hermitean 2-spinor kAB ˙ whose determinant is zero does indeed define a spinor with one index by kAB ˙ = kA ˙ kB . 6. Verify Eq. (11.17). 7. Verify Eq. (11.18). 8. Verify that (11.19) is the inverse transformation to (11.16). 9. Prove that (11.22) implies (11.23). Hint. Since the spinor  A in (11.22) is arbitrary, assume that  A = 1 z and consider the polynomial in z defined by (11.22). 10. Verify Eq. (11.29). 11. Verify Eq. (11.31). 12. Verify Eq. (11.38). 13. Verify Eqs. (11.41) and (11.42). 14. Verify Eqs. (11.47) and (11.48). 15. Verify Eqs. (11.52)–(11.54).

Part II The theory of gravitation

12 The Einstein equations and the sources of a gravitational field

12.1 Why Riemannian geometry? As argued in Section 1.4, gravitational forces can be simulated by inertial forces in accelerated motion. Special relativity describes relations between objects in uniform motion with respect to inertial frames, while gravitational interactions are neglected. The metric of the Minkowski spacetime in an inertial reference frame has constant coefficients. If we transform that metric to an accelerated frame, its components will become functions. Hence, a gravitational field should have the same effect: in a gravitational field the metric should also have non-constant components. Unlike in the Minkowski spacetime, in a gravitational field it should not be possible to make the metric components constant by a coordinate transformation. This was, in great abbreviation, the basic observation that led Einstein (1916) to general relativity. This idea had to be supplemented with equations that would generalise the Newtonian laws of gravitation, and would relate the metric form to the gravitational field. The derivation of these equations, together with several related matters, will be presented in this chapter.

12.2 Local inertial frames Let us recall the conclusion of Chapter 1: the Universe is permeated by gravitational fields that cannot be screened. Their intensity can be decreased by going away from the sources, but one can never decrease that intensity below the minimum determined by the local mean density of matter in the Universe. For this reason, no body in the Universe moves freely in the sense of Newton’s mechanics, and consequently inertial frames can be realised only approximately, with a limited precision. Moreover, there exists no natural standard of a straight line, so the departures of real motions from rectilinearity cannot be measured. However, let us recall that for a body falling freely in a gravitational field the inertial force caused by the acceleration balances the gravitational force. Assume for the beginning that the gravitational field is homogeneous. Then, two bodies falling freely in it will have the same acceleration all the time, so their relative acceleration will be zero and, relative to each other, they will either be at rest or move with a constant velocity. It is 125

126

Einstein’s equations and their sources

known from very precise experiments that the gravitational mass is for all material bodies proportional to the inertial mass, and the factor of proportionality is a universal constant (taken to be just 1). Hence, all bodies will experience the same acceleration in a given gravitational field. Consequently, the frame of reference connected with a body falling freely in a homogeneous gravitational field is inertial. Homogeneous gravitational fields do not exist in Nature. However, along the trajectory of a body falling freely in any real gravitational field, the gravitational force and the inertial force cancel each other at every point. Hence, if the gravitational field is continuous (which is the case in all practical instances), then, in a sufficiently small neighbourhood of the falling body, the inertial forces will be arbitrarily small. Given the precision  attainable in measurements, a falling body B will, at every point of its trajectory, determine a sphere of radius  inside which the inertial force will be smaller than , i.e. unmeasurable. Inside that sphere the reference system defined by the body B will thus be ‘practically’ inertial. It is called the local inertial frame of the body B. (In fact, local inertial frames are defined not by individual bodies, but by their trajectories that do not depend on mass.) It is called ‘local’ because it differs from the universal inertial frame postulated in Newton’s theory: there is an infinity of local inertial frames. It is easy to see that two different local inertial frames will in general move with acceleration relative to each other. For example, consider two local inertial frames connected with bodies falling freely towards the Earth from opposite directions. Thus, at a large distance from a freely falling body its local inertial frame ceases to be inertial.

12.3 Trajectories of free motion in Einstein’s theory Let us recall one more conclusion of Chapter 1: since no standard for a straight line exists in Nature, it will be simpler to assume that the geometry of our space is non-Euclidean, and in that geometry the trajectories of material bodies are free-motion trajectories. What was called ‘gravitational field’ in Newton’s theory will be a consequence of the nonEuclidean geometry in which the free motions take place. By the argument of Section 12.1, the Riemann geometries should be appropriate. They do contain the Euclidean geometry as a special case and, because of the coordinate-independent formalism they use, are consistent with the postulate of equivalence of all reference systems. The generalisation of the notion of a straight line that exists in a Riemann space is the geodesic line. If in a Riemann space the curvature goes to zero, the geometry goes over into the Euclidean geometry and the geodesic lines go over into straight lines. Hence, the geodesic line is a natural candidate for the trajectory of a free motion. In addition, the geodesic lines have the following property: Theorem 12.1 For a timelike geodesic G, the coordinates in a Riemann space can be chosen so that the Christoffel symbols vanish along G. This is an additional argument that the geodesics should be taken as the trajectories of free fall. The vanishing of the Christoffel symbols means that along G the local

12.3 Trajectories of free motion

127

gravitational field will be approximately zero. (It is not exactly zero because the derivatives of the Christoffel symbols will not vanish, and so the curvature will be nonzero.) Proof: (Latin indices will label vectors; the lower case ones will run through the values 0, 1, 2, 3, whereas the upper case ones will run through the values 1, 2, 3. Tensor indices running through the values 1, 2, 3 will also be denoted by latin letters. Wherever confusion might arise, vector indices will have a hat over them.) At a point p0 ∈ G, we choose such a basis in the tangent space that e0  p0  is tangent to G, and the other vectors, eA  p0  A = 1 2 3 are orthogonal to e0  p0 , i.e. g e0  eA  p = 0. Then we define the bases ei  p in a neighbourhood of G as follows: 0

1. For p ∈ G, we transport ei  p0  parallely from p0 to p along G. 2. For p ∈ G we draw through p a geodesic Gp that intersects G orthogonally (see Fig. 12.1). Let p ∈ G be the point of intersection of Gp and G. Then we transport the basis ei  p  (already defined in point 1) to p along Gp . This procedure works provided that there are no singular points on Gp . It gives a unique result provided that p is not too distant from G, otherwise the geodesics orthogonal to G might intersect each other. The following equations hold on G:   ei   G = 0 ei   G = 0

(12.1)

G

p ′

w

σ p

s

p

0

Fig. 12.1. Construction of the Fermi coordinates in which the Christoffel symbols vanish along a given timelike geodesic G. More explanation in the text.

128

Einstein’s equations and their sources

 The first equation follows because (i) ei   e0  G = 0 in consequence of the basis ei  being transported parallely along G and e0  being tangent to G and (ii) ei   eS  G = 0S = 1 2 3 in consequence of eS  at G being tangent to one of the geodesics used to transplant the bases parallely to other points. The second of (12.1) follows from ei  ei  =   . Now, using (12.1) in (4.19), we obtain      (12.2)  = es  es  G

  G

Since the Christoffel symbols are symmetric, this implies at once that   ei  G = ei  G

(12.3)

We have defined the basis (up to rotations of eA p0  A = 1 2 3), but we have not so far defined the coordinates. Let w be the tangent vector to Gp of unit length (see Fig. 12.1), and let be the length of the segment of Gp between p and G ( = 0 for points on G). Let s be the length of the segment of G between p0 and p . For the point p we define the time coordinate x0 = s and the space coordinates 



xA = w p eA  p 

A = 1 2 3

(12.4)

In the coordinates s xA  thus defined, called Fermi coordinates,  x    e0 p  = =   s G ∗ 0

(12.5)

since e0  is tangent to G, and eA 0 p  = 0

A = 1 2 3

∗

w0 = 0

(12.6)

∗

because eA  p  and w lie in the subspace of the tangent space in which x0 = constant. Equations (12.5) and (12.6) imply that the matrix ei  p  has a block form. Consequently, the inverse matrix ei  p  must have the same block form: 



e0  p  = 0  

e0A p  = 0

∗

(12.7)

∗



Now let us differentiate (12.4) by . Since w p  and eA  p  do not depend on , we have A def dx  (12.8) = w p eA  p  = wA p  wA   = ∗ d which means that wA does not depend on . In consequence of (12.6) and (12.7) this  implies that wA p  = wK p eA K p  K = 1 2 3, so ∗





eA K p  = A K 

(12.9)

∗

since wK p  is an arbitrary 3-vector at p . From (12.7) and (12.9) we then obtain ei  p  = i   ∗

ei  p  =  i

∗

(12.10)

12.4 Special relativity versus gravitation theory

This implies that ei  p  is constant along G, so     ei  e0  G = ei  p = ei 0 G = 0 ei 0 G = 0

∗ s (The last equation follows from the previous one by virtue of (12.3).) Now note that d   i  D   i  w e ≡ w e  = 0 d d

129

(12.11)

(12.12)

because w is tangent to a geodesic on which is the affine parameter, while ei  is by definition parallely transported along that geodesic. Moreover, (12.8) implies that dw /d = 0, hence d   i  dei  = w w ei  = wA wB ei AB  (12.13) w e  = w d d  which means that ei AB G = 0, because along G wA is an arbitrary vector orthogonal to G. Then, from (12.3),  (12.14) ei AB G = 0

 Equations (12.11) and (12.14) imply that ei  G = 0, so, from (12.2),     (12.15)  = 0    ∗ 0=

G

The physical meaning of (12.15) is that, in a sufficiently small neighbourhood of each  p ∈ G, other geodesics emanating from p are, up to first-order terms, approximated by straight lines. This neighbourhood is thus a local inertial frame. This is one more suggestion that geodesics should be the trajectories of free motion in relativity.

12.4 Special relativity versus gravitation theory We have so far been dealing with the postulate that general relativity should reduce to the Newtonian kinematics of free motion in the limit of vanishing gravitational field. However, in between these extremes there is special relativity that describes the kinematics of free particles in the absence of gravitation, but takes into account velocities comparable to the velocity of light. In the previous sections we have thus been discussing a two-stage limiting transition: with the gravitational field to zero and with the velocity of light to infinity. When we switch off the gravitational field, but put no limits on the velocities, the geometric theory of gravitation should reproduce special relativity. The spacetime of special relativity is a 4-dimensional flat Riemann space of signature + − −−. The Riemann space of general relativity should thus be of the same signature. This is because a change of signature means either a discontinuity in some metric components or at least one component of the metric passing through zero value, while we expect that the ‘switching off ’ of the gravitational field can be done in a continuous way and does not lead through any singularities.

130

Einstein’s equations and their sources

12.5 The Newtonian limit of relativity We assumed that with the gravitational field switched off, general relativity should reproduce special relativity and, in addition, with the velocity of light becoming infinite it should reproduce the Newtonian kinematics of free motion. A logical consequence of these two postulates is the requirement that when the velocity of light is made infinite while the gravitational field is still there, general relativity should reproduce the Newtonian theory of gravitation. Hence, the field equations of relativity should, in the limit c → , reproduce the Poisson equation  = 4G

(12.16)

where  is the gravitational potential and  is the density distribution of the matter generating the gravitational field.

12.6 Sources of the gravitational field In the theory of gravitation that we are now constructing, the gravitational field should manifest its presence as non-flatness of the metric. Consequently, the metric tensor should be the device to describe gravitation. The metric tensor in four dimensions has in the most general case 10 components. Hence, we will need 10 equations to determine it. The description of the sources in the equations should thus be correspondingly elaborate. The source in the equations generalising (12.16) should be a quantity that is a generalisation of mass-density. According to special relativity, the mass of a body depends on its energy. Hence, the energy of motion of a continuous medium should contribute to the gravitational field and so should the internal energy, e.g. pressure in a fluid and stresses in a solid. In special relativity, the physical state of a continuous medium is described by the energy-momentum tensor T . In any chosen coordinate system, its component T00 is equal to the energy-density c2 , the components T0I  I = 1 2 3, form the 3-dimensional vector of energy stream through a unit area of surface orthogonal to the direction of flow, and the components Tij form the stress tensor. The tensor T is symmetric, and so has in general 10 independent components. Consequently, it is a natural candidate for the source in the field equations of gravitation. The description of motion of matter, i.e. the distribution of velocities inside matter, is part of the energy-momentum tensor. Consequently, the equations of motion are differential relations between various components of the energy-momentum tensor. In the Cartesian coordinates, the equations of motion are T   = 0. In any other coordinates ∗ then, these equations take the form T   = 0

(12.17)

The field equations determining the metric tensor in which the energy-momentum tensor should be the source must be consistent with (12.17).

12.7 The Einstein equations

131

12.7 The Einstein equations Since the gravitational field should be a consequence of the geometry being non-flat, it should be connected with the curvature tensor which contains second derivatives of the metric. If the curvature is contained in the left-hand side of the field equations, then these equations will be of second order in the metric. This suggests that the components of the metric should be analogues of the Newtonian gravitational potential. In that case, the trajectories of motion (the geodesics) would be determined by the first derivatives of the potential, just like in Newton’s theory. The Riemann tensor is of rank 4, while the energy-momentum tensor is of rank 2. Hence, if the Riemann tensor were equal to some quantity constructed from the energy-momentum tensor, then the source of the gravitational field would be a quadratic function of the matter density, and this would make the transition to Newton’s theory complicated. We should thus rather equate a certain quantity constructed from the Riemann tensor to the energymomentum tensor. We already know one good candidate, the Ricci tensor (7.46). It is symmetric and linear in the second derivatives of the metric. The field equations might thus read R = T , where  is a constant coefficient. However, such equations are not consistent with (12.17) because in general R  = 0. But the Ricci tensor obeys an identity similar to (12.17), which is a consequence of the Bianchi identities (7.15). They may be written as R    + R  + R   = 0

(12.18)

Contracting this equation with  g  we obtain G  = 0

(12.19)

where 1 def G = R − g  R (12.20) 2 is called the Einstein tensor. It is symmetric, linear in second derivatives of the metric and obeys (12.19), which is identical in form to (12.17). Hence, G is a better candidate for the left-hand side of the field equations, which should thus read 1 (12.21) R − g  R = T

2 These equations are called the Einstein equations. The coefficient  will be determined in Section 12.11 from the condition of correspondence of (12.21) to the Poisson equation (12.16). In vacuum, the Einstein equations take the form G = 0, which is equivalent to  R = 0. This equation, together with (7.48)–(7.49), shows that outside the sources the Riemann tensor coincides with the Weyl tensor. Thus, the Weyl tensor represents that part of the gravitational field that propagates into vacuum. The Ricci tensor represents that part of curvature that is algebraically determined by matter and vanishes in vacuum. It may seem unbelievable that such important and nontrivial equations should be derived almost without calculations and without experimental hints, by a speculation that was in places non-unique. However, this is how it was; Einstein actually guessed his equations

132

Einstein’s equations and their sources

by a reasoning described above in great abbreviation (it had taken him about 10 years to arrive at them). Therefore, it is not easy to present a convincing, brief and logical derivation of the Einstein equations. The most convincing route to them is Einstein’s own. It was described in more detail by Mehra (1974) and also in Einstein’s papers (Einstein et al., 1923). Because of the non-uniqueness of the reasoning leading to the Einstein equations, the Einstein theory is not the only geometric theory of gravitation that can be built upon the Newton theory and special relativity. Almost every one of the intuitive assumptions made on the way can be modified so that another set of equations will result. Some of those alternative theories will be briefly presented in Section 12.16. However, Einstein’s theory has successfully passed all experimental tests, whereas the other theories were either proved wrong or else found to require such small modifications of Einstein’s relativity that it does not really make sense to use them.

12.8 Hilbert’s derivation of the Einstein equations The derivation of Einstein’s equations given in the previous section was based on the original reasoning of Einstein himself. However, David Hilbert had been working on deriving these equations simultaneously with Einstein by a different method. There was some exchange of information between them, but, taking things formally, Hilbert was the first to publish the correct result (see more details in Mehra (1974)).1 Hilbert proposed that all theories in mathematics and physics should be derived by deduction from sets of axioms. This programme contributed greatly to clarifying the logical structure of physical theories. However, the physical justification of some of the postulates is still lacking. For the gravitation theory, Hilbert postulated to use a variational principle. The reasoning leading to the postulated integrand, just like Einstein’s own reasoning, contains a few questionable and mysterious assumptions, which are justified only intuitively. Most of the other geometric theories of gravitation were derived from variational principles, which confirms that this method is not unique, either. Hilbert proposed the following axioms: I.

The field equations of gravitation should follow from a variational principle. The independent variables in the action integral should be the components of the metric tensor. II. The action functional should be a scalar. III. The Euler–Lagrange equations (i.e. the field equations) that will follow should be differential equations of second order in g . 1

Hilbert presented a general subclass of Eq. (12.21), corresponding to T = 0 and to T being the energy-momentum tensor of the electromagnetic field, at the meeting of the Royal Academy of Sciences at Göttingen on 20 November 1915. Einstein presented the final correct form of Eq. (12.21) at the meeting of the Prussian Academy of Sciences in Berlin on 25 November 1915. This game with dates is only a historical curiosity. Einstein was the unquestionable spiritual father of relativity, and Hilbert himself made that point repeatedly. Einstein had worked on relativity since about 1907 and had published several papers explaining the basic ideas and preliminary results. Hilbert joined in about 1913 and was influenced by Einstein’s ideas from the beginning.

12.8 Hilbert’s derivation of the Einstein equations

133

From this point on, further reasoning leads to Einstein’s equations almost uniquely, but the postulates themselves leave several questions open. For example, some unanswered questions regarding axiom I are the following: 1. What is the geometrical and physical interpretation of the action functional? 2. What is the geometrical and physical meaning of the extremum found from the Euler–Lagrange equations? 3. Why should the field equations of gravitation be equivalent to an extremum of some abstract quantity? Axiom II is justified by the observation that if an integral should be a tensorial object, then the integrand must be a scalar. Integrals of other tensorial objects are not tensors. Deriving covariant equations from a non-covariant action integral would thus be inconsistent with the underlying philosophy of the theory. Axiom III makes use of the correspondence principle in the simplest way. Since the Poisson equation, which should follow from the geometric equations as a limit, is of second order, and most other physical theories are based on second-order equations, the field equations of gravitation should be of second order, too. However, this is not a unique argument either: theories of gravitation with field equations of fourth order do exist. In the limiting transition to Newton’s theory, the terms with derivatives of order higher than 2 disappear. The conclusions of Hilbert’s axioms are the following:  I. In a 4-dimensional spacetime, the action integral should be 4  d4 x, where 4 is a certain 4-volume in the spacetime, on whose boundary 4 the variations g vanish. The function  depends on the metric tensor g and its derivatives g  g , etc.  II. If 4  d4 x should be a scalar, then  should be a scalar density of weight −1 because the volume element d4 x is a scalar density of weight +1. The simplest scalar √ √ density of weight −1 is −g. Thus  = −gH, where H is a proper scalar. III. The order of the Euler–Lagrange equations is twice the order of the highest derivative in the action integral. It would thus be best if H were a function only of g and g . However, one cannot form a non-trivial scalar by combining algebraically g       and g = g + g  since the Christoffel symbols are not tensors.   The second derivatives of g , if present in H, will not give a contribution to the Euler–Lagrange equations if they can be collected into a divergence of an expression that vanishes on the boundary of the integration volume. This will be possible if g enter H linearly, i.e. are contracted only with terms that do not contain g . Expressions linear in the Riemann tensor are of this form. The only expressions that can be built from the Riemann tensor and are linear in g are R  = R = −R  and g  R = R. Hence H = g  R = R and √ −gR d4 x

(12.22) Wg = 4

134

Einstein’s equations and their sources

More exactly, this should be the action integral for the left-hand side of the field equations. The full action integral should be W = Wg +

4

L d4 x

(12.23)

where L = 0 in vacuum. Before we calculate Wg /g , let us note two auxiliary equations: 1 1

4 1

4  g1 1 g2 2 g3 3 g4 4  3! 1 = g1

4 g 1 1 g 4 4 1

4 g1 1 g2 2 g3 3 g4 4 3! 1

4 1 = g11

  12 2 3 3 g 4 4 g4 4 = gg  g  4 3!

g =

g  = −g  g  g

(12.24) (12.25)

In (12.24) we used (3.39), its derivative, (7.106), (3.32) and (3.37). Equation (12.25) follows by differentiating the equation g  g =   . Note that the variations of the Christoffel symbols are differences between Christoffel symbols calculated from different metric tensors,         g

 = g

+ g

 −    

(12.26)



  Hence,  is a tensor because the non-tensorial terms in (4.23) will cancel out in the  combination   (12.26). Consequently, it makes sense to calculate the covariant derivative  of  . Writing it out and comparing it with R , which is calculated from the  definition of R , we find that





 R = −  





  +  



(12.27)

Hence Wg =





1 √ d4 x − √ gg  g R − −gg  g  R g 2 −g 4  

     √  −   + 

+ −gg   

(12.28)

12.8 Hilbert’s derivation of the Einstein equations

135

The term in square brackets can be written as

√ −gg   −





 



√  + −gg  





 



(12.29)

√ because −g and g  are covariantly constant. The expressions in parentheses are vector densities of weight −1. Thus, as shown in Section 4.1, their covariant divergences equal their ordinary divergences: √





    −   +  −gg   

      √ √   = − −gg  + −gg     

(12.30)

(in the second term we interchanged  and ). Now we see that (12.30) is an ordinary divergence. Hence, from the Stokes theorem, 4





     √ − −gg   + −gg    d4 x  

      √ √   = − −gg  + −gg  n d3 x   4 √

(12.31)

where n is the normal vector to the boundary 4 of the region 4 , while d3 x is the volume element in 4 . From the assumption g 4  = 0 it now follows that the integral of (12.29) is zero. Hence, in (12.28):  1√ √   g = 0

d4 x −gg R − −gR Wg = 2 4



(12.32)

√ Thus, if we denote L/g = − −gT  , then the equation W = 0 implies (12.21) by virtue of (12.23) and (12.32). Hilbert’s method does not say what T  should be; he managed to specify it only for the electromagnetic field in vacuum. The Hilbert variational principle works safely only in deriving the Einstein equations in full generality. With a less-than-general metric, for example with symmetries, the variational principle can lead to a false result. This is known to happen for a large subset

136

Einstein’s equations and their sources

of the Bianchi-type models, because of their spatial homogeneity. When all fiduciary metrics are spatially homogeneous, the variations are spatially homogeneous, too. Hence, they cannot be assumed to vanish on the boundary – they vanish either everywhere or nowhere. In consequence, the boundary terms cannot be neglected. See MacCallum (1979) for more details.

12.9 The Palatini variational principle Einstein’s equations can be derived from a still more general variational principle, called the Palatini principle.1 In this approach, the metric tensor and the connection coefficients are treated as two independent sets of variables. The connection is assumed only to be symmetric,    =     . The vanishing of coefficients of variations of    implies then Eq. while the vanishing of coefficients of variations of the metric implies  (12.21),    =  i.e. the covariant constancy of g .  

12.10 The asymptotically Cartesian coordinates and the asymptotically flat spacetime In the next section we will investigate the limiting transitions from Einstein’s theory to Newton’s theory and to special relativity. This section is a comment on the interpretation of those operations. A flat space (spacetime) exists as a background in both of the limiting theories. When we go away from the sources of the gravitational field, the field becomes ever weaker and disappears in the limit of infinite distance. In that limit, the metric tensor of general relativity should tend to the flat metric of special relativity. This is only a ‘thought experiment’ because, as mentioned earlier, in the real Universe the intensity of the gravitational field can never be smaller than the value determined by the average matter density in the Universe. The spacetime whose geometry becomes flat in the limit of large distances from the sources of the gravitational field is called asymptotically flat. Only in such spacetimes can we consider the Newtonian limit of general relativity. The coordinates that, in the same limit, go over into the Cartesian coordinates of special relativity are called asymptotically Cartesian.

12.11 The Newtonian limit of Einstein’s equations From the considerations of Section 12.5 it follows that in the limit c →  general relativity should reduce to Newton’s theory of gravitation. Hence, in the same limit, the 1

This is how this approach is commonly called, but Ferraris, Francaviglia and Reina (1982) argued that it was not Palatini (1919) who invented it, but Einstein (1925).

12.11 The Newtonian limit of Einstein’s equations

137

equation of a geodesic should reduce to the Newtonian equation of motion of a particle in a gravitational field, m

dvI = −mI  dt

(12.33)

where vI is the velocity of the particle and  is the gravitational potential. We will deal with the field equations later in this section. Newton’s equations of motion follow from the variational principle

t2

 t1

L dt = 0

def 1 L = mIJ vI vJ − m 2

(12.34)

while the equations of a geodesic follow from

t2

 t1

 dt = 0

def

=

ds

dt

(12.35)

Investigating the limit on the equations of motion themselves would be difficult. It will be simpler to do it on the Lagrangians. The Euler–Lagrange equations do not change when the Lagrange function is multiplied by a constant or when a constant is added to it. Hence, the condition of correspondence for the Lagrangians is lim C1  + C2  = L

c→

(12.36)

where C1 and C2 are constants, as yet unknown. The Newtonian Lagrangian has the dimension of energy. The relativistic Lagrangian is  ds vI vI vJ = = c g00 + 2g0I + gIJ 2  dt c c

(12.37)

where I J = 1 2 3 and vI = dxI /dt is the Newtonian velocity of the particle. Since the expression under the square root is dimensionless, the dimension of  is c. Hence, in order that the dimensions of both sides in (12.36) are the same, we must have C1 = mc, where  is a dimensionless coefficient. The Newtonian Lagrangian contains the kinetic energy of the particle. In special relativity, the kinetic energy is a part of the total energy mc2 / 1 − v/c2 . Hence, the constant C2 in (12.36) must compensate for the rest energy contained in C1  so that C1  + C2  contains only the kinetic energy. We do not know yet with what sign the rest energy will be contained in C1 , so we look for C2 in the form C2 = mc2 ,  = ±1, and the sign of  will follow later. Finally, (12.36) becomes

 lim mc

c→

2

 vI vI vJ 1  g00 + 2g0I + gIJ 2 +  = IJ mvI vJ − m

c c 2

(12.38)

138

Einstein’s equations and their sources

Developing the square root by the Taylor formula up to terms of second degree in the velocity we obtain  vI vI vJ √ g vI g00 + 2g0I + gIJ 2 = g00 + √ 0I t c g00 c  I J  3  g0I g0J v v v gIJ 1 (12.39) +O 3

+ √ − 2 g00 g00 3/2 c2 c √ Since there are no terms linear in vI /c on the right-hand side in (12.38), cg0I / g00 → 0 c→

must hold, i.e.

  g0I 1 =O 2

√ g00 c

(12.40)

√ Then −g0I g0J /g00 3/2  in (12.39) becomes a correction of order 1/c4 to gIJ / g00 . Hence, using (12.39) and (12.40), we obtain in (12.38)      √  gIJ vI vJ 1 1 2 lim c  g00 +  +  √ +O (12.41) = IJ vI vJ −  c→ 2 g00 c 2   where  gIJ = gIJ − O 1/c4 . The equation above should be an identity in vI . Equating the terms of the same order in vI we obtain     √ 1 2 c  g00 +  = − + O  (12.42) c    1 gIJ = IJ + O

(12.43) √  g00 c From (12.42) we have

   1 1  √

g00 = − − 2 + O 3  c c

(12.44)

We have not yet made use of the condition that, in the limit of vanishing gravitation, the general relativistic Lagrangian (12.35) should  3 go over into the special relativistic Lagrangian for geodesic motion. The term O 1/c is of higher order than /c2 , so, if  3 2 /c → 0, then O 1/c → 0 all the more, so c→

c→

   1 1  → 0

− 2 +O 3 →0  c c

(12.45)

Moreover, for  = 0 we should obtain the Minkowski metric, hence −/ → 1. But →0

 and  are constants, so the above means that −/ = 1. In the signature + − −− it is seen from (12.43) that  < 0, while  = ±1 by definition, so the above implies  = −1  = +1. The final result is thus, from (12.44), (12.40) and (12.43):       2 1 1 1 g00 = 1 + 2 + O 3  g0I = O 2  gIJ = −IJ + O

(12.46) c c c c

12.11 The Newtonian limit of Einstein’s equations

139

Equations (12.46) follow from the conditions that the general relativistic equations of motion go over into the Newtonian equations of motion when c →  and into the special relativistic equations of motion when  → 0. Now we shall investigate the limit c →  for the field equations. From the equation g g  =   , taking the cases  = 0  = I = 0  =  = 0 and  = I = 0  = J = 0, we conclude that       2 1 1 1 00 0I IJ IJ g =O 2  g = − + O

(12.47) g = 1− 2 +O 3  c c c c Using these in the formulae for the Christoffel symbols we obtain     1 0 =O 3  c 00       I 1 0 I = 2 +O 3 =  c c 0I 00       1 0 I =O 2 =  c IJ 0J     1 I =O

c JK Hence, further

  II 1 sum over I R00 = 2 + O 3 c c     1 1 R0I = O 2  RIJ = O

c c

The Einstein equations (12.21) can be written in the equivalent form   1 def T = g  T

R =  T − g T  2

(12.48)

(12.49)

(12.50)

(12.51)

(12.52) (12.53)

(12.54)

How should the right-hand side of (12.54) behave in the Newtonian limit? Since T00 is the energy-density, it contains a contribution from the rest energy. All other contributions to T00 must be by at least one order in c smaller than that, so we expect that T00 = c2 +Oc, where  is the mass-density. The components T0I form the vector of energy stream. In the limit c → , motion of matter should have no influence on the gravitational field it generates.1 Consequently, T0I should be by at least one order in c smaller than T00 in order that they become negligible in the limit c → , thus T0I = Oc. The components 1

If the mass distribution does not change with time, then the motion of matter is not detectable via its gravitational field. For example, the exterior gravitational field of a mass in axisymmetric rotation in Newtonian theory is not distinguishable from the field generated by a static mass with the same mass distribution.

140

Einstein’s equations and their sources

TIJ describe the stress energy-density. Compared to the rest energy, any other kind of energy is by two orders in c smaller, so TIJ = O1. Hence, finally, T = g  T = c2 + Oc

From this

 R00 = 

 1 2 c + Oc  2

(12.56)

  RIJ = O c2

R0I = O c 

(12.55)

(12.57)

From (12.56) and (12.52) we have     1 2 1 II =  c + O + Oc

c2 c3 2

(12.58)

In the limit c →  this should be equivalent to the Poisson equation (12.16), so =

8G

c4

(12.59)

The remaining equations in the set, (12.57), impose limitations on the terms O1/c2  in g0I and O1/c in gIJ . These can be read out if we want to consider the Einstein theory as a small perturbation imposed on the Newton theory in a weak gravitational field. There are various approaches to this application of general relativity, the most elaborate of them is the Parametrised Post-Newtonian (PPN) formalism (Misner, Thorne and Wheeler, 1973, Will, 1981). We will briefly describe one such approach (the weak-field approximation) in Section 12.18. Formally, in the limit c → , Eqs. (12.57) are fulfilled identically.   In the equation R00 =  T00 − 21 g00 T we had to include terms of order 1/c2 because the coordinate was x0 = ct, so every differentiation by x0 introduced the factor 1/c. In order to liberate R00 from the factor 1/c2 thus introduced, we had to multiply (12.56) by c2 . To achieve the same in the first equation of (12.57) we would have to multiply it by c, and then we would obtain the identity 0 = 0 in the limit c → .

12.12 Examples of sources in the Einstein equations: perfect fluid and dust A fluid whose pressure obeys the Pascal law, while the transport of energy occurs only by means of mass flow is called a perfect fluid. It does not conduct heat or electric current, and its viscosity is zero. From this definition, we will now deduce the form of its energy-momentum tensor. If u is the velocity field of an arbitrary continuous medium, while s is the proper time on the lines of flow of that medium, then ds2 = g dx dx 

u =

dx

ds

(12.60)

12.12 Perfect fluid and dust sources

141

These imply g u u = 1

(12.61)

This holds for every continuous velocity field and for any medium. Now let us choose, for a while, the coordinates adapted to u , in which u =  0 , i.e. ∗

in which the time-coordinate x0 is the affine parameter on the flow lines of matter, and dxI s/ds = 0 I = 1 2 3, where xI s are spatial coordinates of the particles of the fluid. ∗

In these coordinates, xI = constant, which means that the particles of the fluid do not move with respect to the timelike hypersurfaces of the coordinate system. Such coordinates are called comoving, and they are frequently used in relativistic hydrodynamics. Their construction can be visualised as follows. We choose an arbitrary hypersurface S that intersects all flow lines of the fluid, and an arbitrary coordinate system within S. To each particle of the fluid we then assign the spatial coordinate xI of the point where it crossed S. To assign the time-coordinate to a point p in spacetime we take the flow line Cp that passes through p. The time-coordinate of p is the proper time that elapsed between the event of Cp intersecting S and the event of Cp passing through p. By definition, T00 p is, in any coordinate system, the energy density measured at a given point p. In the comoving coordinates, the only energy that a particle can have is its inner energy  = (rest energy) + (energy of thermal motion of its particles) + (chemical energy). Hence, T00 =  and, at the same time, T00 = T u u , so ∗

∗

T u u = 

 

(12.62)

This is now an equality of two scalars, so it holds in any coordinates. By definition, T I 0  I = 1 2 3, is the vector of the energy stream. But in the comoving coordinates, by the definition of a perfect fluid, there are no energy flows, so consequently T I 0 = T I  u = 0. This implies that T   u = u , where  is an unknown coefficient. ∗

∗

∗

From (12.61) and (12.62) we find that  = , so T   u = u 

(12.63)

which is again a tensor equation. Now choose a point q in the spacetime and an arbitrary vector v q at q that is orthogonal to u q: u qv q = 0

(12.64)

The vector v q points from q towards a neighbouring particle. Since Eq. (12.64) says that the projection of the velocity on v q is zero, it follows that the particle to which v q points does not move relative to q. The collection of all vectors having the property (12.64) thus determines a 3-dimensional volume element comoving with the particle that was at q. Consequently, the Pascal law must apply in this volume element: the pressure p exerted on the surface element in the fluid creates the force f = p in the direction nI  I = 1 2 3, orthogonal to . The pressure p and the force f do not depend on the direction of nI , i.e. on the orientation of within the fluid. Let −T I J denote

142

Einstein’s equations and their sources

the Newtonian (3-dimensional) stress tensor. (The minus sign is a consequence of the signature + − −−; in this signature the spatial part of the energy-momentum tensor T   is not the stress tensor  I J itself, but − I J .) By the definition of the stress tensor, the following must hold: −T I J nJ = fnI ≡ p nI 

(12.65)

T I J nJ = −pnI

(12.66)

which implies

The vector nI was an arbitrary vector within the volume element of the fluid comoving with q, i.e. an arbitrary vector in the 3-dimensional subspace orthogonal to u q. Equation (12.66) shows that every such vector is an eigenvector of the matrix T I J connected with the eigenvalue −p, which implies T I J = −pI J

(12.67)

An arbitrary timelike vector field u in general is not orthogonal to a family of hypersurfaces, so the vectors nI in (12.65)–(12.67) are in general neither tangent nor orthogonal to hypersurfaces, and so cannot define a coordinate system. However, at every point q of the manifold, in the tangent space we can choose a subspace orthogonal to u , and choose in that subspace the orthonormal basis eI  , I = 1 2 3. In that basis, Eq. (12.67) will be fulfilled, where TIJ = eI  eJ  T

(12.68)

(In other words, we choose coordinates that are adapted to the basis vectors eI  at one point q only, which is always possible.) Now, from (12.62)–(12.63), (12.67) and (12.68) we can deduce the general formula for the energy-momentum tensor of a perfect fluid. Let us choose an orthonormal tetrad ei  , i = 0 1 2 3, in spacetime such that e0  = u , while each eI  , I = 1 2 3, obeys (12.66). Then g ei  ej  = ij = diag+1 −1 −1 −1

(12.69)

and from (12.62)–(12.63), (12.68) and (12.69) we have T00 = T u u = 

(12.70)

T0A = T u eA  = u eA  = 0 

A = 1 2 3



TAB = −T AB = pAB = −pAB

(12.71) (12.72)

These are the components of the scalar image of T . Applying the inverse projection, (4.16), we obtain 



T = ei  ej  Tij = u u T00 + eA  eB  TAB 



= u u − pAB eA  eB  − pu u + pu u =  + pu u − pg

(12.73)

12.13 Equations of motion of a perfect fluid

143

A perfect fluid whose pressure is identically zero is called dust. It follows that for dust T =  + pu u

(12.74)

12.13 Equations of motion of a perfect fluid The equations of motion of the sources of a gravitational field, T   = 0, for a general perfect fluid are equivalent to  + p u u +  + pu  u +  + pu u  −p g  = 0

(12.75)

The identity (12.61) implies u u  = 0

(12.76)

Contracting (12.75) with u and using (12.61) and (12.76) we obtain  u +  + pu  = 0

(12.77)

This is the energy conservation equation which says that the volume work −pu  generates the energy stream u . Now using (12.77) in (12.75), we obtain  + pu  u − p g  + p u u = 0

(12.78)

These are the general relativistic equations of motion of a perfect fluid. In the Newtonian limit (c → ) and in asymptotically Cartesian coordinates, they go over into the Euler equations of motion  dv/dt = −gradp. Equations (12.77) and (12.78) simplify for dust, when p = 0. Equation (12.77) then becomes   (12.79) u  = 0 which is the relativistic equation of continuity (mass conservation) that in the Newtonian limit goes over into /t + divv = 0. Equation (12.78) becomes u  u = 0. This means that the covariant derivative of the vector field tangent to the flow lines along these lines is zero. This fulfils the requirements of the definition of a geodesic in affine parametrisation, see Section 5.2. Consequently, dust moves along geodesics, and the proper time of the particles of dust is an affine parameter on these geodesics. In fact, the necessary and sufficient condition for a geodesic motion of a perfect fluid   is somewhat weaker than p = 0. As seen from (12.78), it is p g  − u u = 0. We have already met the operator h = g  − u u once; see Eq. (7.102). It projects tensors on the hypersurface elements orthogonal to the vector field u . The equation h p = 0 means that the gradient of pressure is collinear with the velocity field, i.e. there are no spatial gradients of pressure in the comoving coordinates.

144

Einstein’s equations and their sources

12.14 The cosmological constant When general relativity was created, it was clear that its predictions would significantly differ from those of Newton’s theory in two situations: (1) in strong gravitational fields, when the extent of the regions where local inertial frames exist becomes small; and (2) in large sub-volumes of the Universe, where even small departures of the real geometry from the Euclidean geometry cumulate over large distances and become visible during observations of distant objects. Consequently, when Einstein thought about physical applications of his theory, one of the first things he tried was to construct a model of the Universe. At that time everybody was sure that the geometry and matter distribution in the Universe were time- and space-independent. Calculations showed, however, that these assumptions are self-contradictory – such a model of the Universe did not exist in relativity. At that moment, Einstein was on the verge of making another great discovery. The year was 1916, and the first observations proving the expansion of the Universe were published only in 1927. Yet this time Einstein’s belief in prejudice turned out to be stronger than his tendency to think boldly. While searching for a reason of the failure of his first attempt, Einstein did not question the assumption that the Universe is static, but turned his suspicion against his equations (12.21). He soon found a gap in his reasoning: the left-hand side of the field equations that has all the required properties need not necessarily be the Einstein tensor R − 21 g R. One can add to it any symmetric tensor H whose covariant divergence vanishes and that does not depend on the derivatives of the metric.  not increase the order of the field equations, while the  Such a correction will equation R − 21 g  R + H   = 0 will still hold. The simplest tensor of this property is g  , where  should be a universal constant. The modified Einstein equations 1 R − g  R + g  = T  2

(12.80)

in the limit c →  go over into the modified Poisson equation  − c2 = 4G

(12.81)

Hence, the constant , called the cosmological constant, describes an effect that is absent from the ordinary Newton theory: a universal attraction (for  > 0) or repulsion (for  < 0) of matter particles. The modified equations (12.80) allowed for the existence of a static, homogeneous and isotropic solution of the form   (12.82) ds2 = c2 dt2 − R2 d 2 − R2 sin2 d! 2 + sin2 ! d"2  where c 1 = √  R= √ − 2 G

(12.83)

12.15 An example of an exact solution

145

 being the average mass density in the Universe, constant by assumption. The spacetime corresponding to the metric (12.82) is, by tradition, still called the Einstein Universe, although it is no longer considered a model of the real Universe. Since  < 0 here, the ‘cosmological repulsion’ balances the gravitational attraction, which allows the system to be static (but unstable, as we will see in Section 17.6). This brief history of the introduction of the cosmological constant shows that in fact it appeared in consequence of an error. Had Einstein not insisted on obtaining a static model of the Universe, he would have had a chance to predict that the Universe should expand or collapse, 11 years before the expansion was observed. When he realised later how close he was to making that prediction, he said that the introduction of the constant was ‘the biggest blunder of his life’ (Misner, Thorne and Wheeler, 1973, pp. 410–411).1 Today, the cosmological constant is more popular among particle physicists than among specialists in relativity, and the observations of brightness of distant supernovae are even said to indicate that  is strictly negative; see Section 17.9. Its absolute value must be very small (less than 10−50 cm−2 (Misner, Thorne and Wheeler, 1973, pp. 410–411)), so it can play a role only in the evolution of the Universe. In the Solar System, it has no observable influence on the motion of planets. A great number of solutions of the modified Einstein equations (12.80) is known (Stephani et al., 2003, section 24.2), both inside matter distributions and in vacuum. Examples will be given later in this text (see Section 14.4).

12.15 An example of an exact solution of Einstein’s equations: a Bianchi type I spacetime with dust source The Einstein equations had for many years been rumoured to be very difficult, almost too difficult to find any exact solution. This opinion lingers until today and is even repeated in some publications, although it ceased to have any basis decades ago. No formula for a general solution of Einstein’s equations has been found that would generalise x =  − d3 x Gx / x − x , which is the formal solution of the Poisson equation. The reason of the difficulty is the nonlinearity of the Einstein equations. In general relativity, the superposition of two solutions is not their sum and the law of composition of solutions is not known. Consequently, finding a solution for a simple situation does not really help in looking for more general solutions, except that it increases the basis of experience and knowledge. Nevertheless, for special cases (like high symmetry, special properties of the source or special properties of the Weyl tensor), hundreds if not thousands of solutions are known, and any attempt to list and compare them is a major undertaking 1

That story has a complicated continuation. Hubble, who is credited with the discovery of the expansion of the Universe (Hubble, 1929), had not believed, until the end of his life, that the Universe is actually expanding. He insisted, even in his last paper that appeared in print after his death (Hubble, 1953), that expressing the observed redshifts in spectra of galaxies through their equivalent velocities of recession is merely a convenient mathematical device (Krasi´nski and Ellis, 1999). Then, Milne and McCrea (1934) (see Section 17.5) showed that expansion of the Universe could and should have been predicted on the basis of Newton’s theory of gravitation in the eighteenth century since all the mathematical knowledge necessary for that purpose had existed already at that time. The prediction was not made because nobody tried – just because everybody was sure that the Universe was static.

146

Einstein’s equations and their sources

(Stephani et al., 2003; Krasi´nski, 1997). In order to prove to the reader that the task of finding a solution is not at all hopeless and to demonstrate a few characteristic methods of calculation, we shall present a derivation of a certain exact solution. We will assume that the spacetime is spatially homogeneous, with the symmetry group of Bianchi type I, and that the source in the equations is dust. The cosmological constant will be assumed zero. We thus begin with the metric form (10.29). For a Bianchi type I algebra all generators commute to zero. Hence (see Exercise 5 in Chapter 8) we can choose the spatial coordinates x y z so that the generators become k  =  I 

x1 = x x2 = y x3 = z

I 

(12.84)

(which means that xI is a parameter on the curve tangent to k I and obeys k I = x /xI ). For the generators (12.84), the Killing equations are gIJK = 0

I J K = 1 2 3

(12.85)

i.e. the components gIJ depend only on t. Knowing this, we find the following formulae for the Christoffel symbols, the Riemann tensor and the Ricci tensor (the components not listed are zero):     1 1 0 I = gIJt  = g IS gJSt (12.86) 2 2 IJ 0J 1 1 gIJtt − g RS gIRt gJSt  2 4 1 IR 1 = g gKRt gJLt − g IR gLRt gJKt 4 4 1 RS 1 LM RS = − g gRStt + g g gLRt gMSt  2 4 1 1 RS 1 = gJLtt − g gJRt gLSt + g KR gKRt gJLt

2 4 4

R0 I0J =

(12.87)

RI JKL

(12.88)

R00 RJL

(12.89) (12.90)

The identity R0I ≡ 0 implies u0 uI = 0. Since u0 cannot vanish (then u would be a spacelike vector, i.e. the dust would move with a superluminal velocity), we must have uI = 0 = uI =⇒ u0 = u0 = 1 T00 =  TI = 0

I = 1 2 3

 = 0 1 2 3

(12.91)

where  is the energy-density of the dust. In the following, we will use the auxiliary formulae that follow immediately from (12.24) and (12.25): g RS gRSt = gt /g g t = −g   where g = det g  = − det gKL . MS

LM RS

g gLRt 

(12.92) (12.93)

12.15 An example of an exact solution

147

√  −gu  = 0, which in our coordinates becomes √From (12.79) we have −g t = 0. Since the components of the metric tensor depend only on t, also g and  depend only on t, so √ (12.94)  −g = M = constant From (12.90) and (12.91), using (12.92) and (12.93), we obtain 3 1 R = R00 − g JL RJL = −g RS gRStt − g RS t gRSt − gt /g2

4 4

(12.95)

From R00 − 21 g00 R = , using (12.90) and (12.93)–(12.95), we now obtain 1 1 RS √ g t gRSt + gt /g2 = M/ −g

8 8

(12.96)

This equation will be later used to eliminate g RS t gRSt . The Einstein equations imply that for dust R = g  R = −

(12.97)

We substitute (12.95) and (12.94) in the above and obtain 3 1 g RS gRStt + g RS t gRSt + gt /g2 4 4  RS  1 RS 1 √ ≡ g gRSt t − g t gRSt + gt /g2 = M/ −g

4 4

(12.98)

Now we use (12.96) to eliminate g RS t gRSt , and we obtain  1 √ g RS gRSt t + gt /g2 = 3M/ −g

2 √  Using (12.92) we obtain −g tt = 3M/2, which is integrated to give 

√

3 −g = Mt2 + At + B 4

(12.99)

(12.100)

where A and B are arbitrary constants. We still have to integrate the equations GJL = 0. Using (12.97), (12.94), (12.92) and (12.93) they are reduced to 1 √ 0 = −GK L = g KJ RJL − K L M/ −g 2 1 1 1 gt KS 1 √ = g KS gLStt + g KS t gLSt + g gLSt − K L M/ −g

2 2 4 g 2 Hence √

  1 √ −g g KS gLSt t − gt / −g g KS gLSt − MK L = 0 2

which is integrated with the result √ −gg KS gLSt = MtK L + AK L = 0

(12.101)

(12.102)

(12.103)

148

Einstein’s equations and their sources

where AK L is a matrix of constant elements. From this, contracting with gKM , we obtain Mt AK g gLMt = √ gLM + √L KM

−g −g

(12.104)

This shows at once that AML = ALM . Furthermore, note that for any fixed instant t = t0 the matrix gKM t0  can be transformed into the unit matrix by transformations of the form x I = bI J xJ , where the matrix bI J has constant coefficients. Since AKL is symmetric, we  t0  to can then use the orthogonal transformations preserving the simple form of gKM diagonalise AKL , too. Assume that we have done so and have chosen the coordinates in which gKM t0  and AKL have these simple forms. Then, with use of (12.100), (12.104) becomes gLMt =

Mt + AL L gLM 3 Mt2 + At + B 4

no sum over L

(12.105)

 M + AL L d

3 M 2 + A + B 4

(12.106)

and the solution of this is



gLM t = gLM t0  exp

t

t0

Thus, if gLM t0  is diagonal, then so is gLM t at all times. (But it is not always possible to diagonalise the metric tensor in a Bianchi-type spacetime. In our case the diagonal form followed from the field equations.) Equation (12.106) is not the final result yet because the components gLM still have to obey (12.100) and (12.96). The constants AL L are by tradition parametrised as follows: AL L = 2pL A

no sum over L

(12.107)

and then, by virtue of (12.100) and (12.96), the new parameters pL must obey p1 + p2 + p3 = 1   1 2 A 1 − p1 2 + p2 2 + p3 2 = MB

2

(12.108)

In the case M = 0 the metric obtained above becomes a vacuum solution: ds2 = dt2 − t2p1 dx2 − t2p2 dy2 − t2p3 dz2 

(12.109)

in which the constants p1 , p2 and p3 obey p1 + p2 + p3 = p1 2 + p2 2 + p3 2 = 1

(12.110)

This solution was found by Kasner (1921). It was one of the earliest exact solutions of Einstein’s equations to be published in the literature.

12.16 * Other gravitation theories

149

12.16 * Other gravitation theories As mentioned at the end of Section 12.7, there are several gravitation theories that are alternatives to Einstein’s. In this section we will present a brief overview of a few of them. They are not necessarily those that ever had the greatest chance to replace general relativity as the theory of gravitation – the examples are meant to illustrate the various possibilities used by different authors. Except for Rosen’s theory, all of them are generalisations of general relativity and contain it as a limit. A much more extended overview of alternative gravitation theories, and a comparison of them with experimental tests, can be found in the book by Will (1981). The Kaluza–Klein theory is one of the generalisations, but its presentation must be preceded by a description of the Maxwell theory in curved spacetime, therefore we postpone it to the next chapter.

12.16.1 The Brans–Dicke theory The theory was first published in 1961 (Brans and Dicke, 1961), and the best source for studying it is the book by Dicke (1964). The field equations of the Brans–Dicke (BD) theory are   1 8 # 1    − g   T + R − g R = 2   2 2 + g    −

 1   −g g     

1    + R = 0 2 2#

(12.111) # = constant

(12.112)

This is a generalisation of Einstein’s theory in which the gravitational constant is replaced by the scalar field . In this theory, the gravitational ‘constant’ c4 / thus varies in time and space, and its changes are induced by the scalar curvature R via Eq. (12.112). The scalar curvature in turn depends on the distribution of matter via (12.111). In this way, the distribution of matter influences the intensity of gravitation, which is a partial realisation of the Mach principle. General relativity (GR) follows from the BD theory as the limit  = c4 /G = constant, # → . Observable modifications of GR would be predicted if # ≤ 6; in particular, part of the anomalous orbital motion of Mercury would then be caused by the oblateness of the Sun. However, detailed observations imply that # ≥ 23. With that value, the predictions of the BD theory are observationally indistinguishable from the predictions of Einstein’s theory. For this reason, the BD theory is currently out of favour with theoreticians. However, this may be a temporary situation. This theory is conceptually the most developed of all competing theories of gravitation, with its logical structure and interpretation well clarified, and may still have a role to play in the future.

150

Einstein’s equations and their sources

12.16.2 The Bergmann–Wagoner theory Original references for this theory are Bergmann (1968) and Wagoner (1970). Its field equations are   1 8 # 1   T + g  −   R − g R − g =   2  2 2   1   −g g        d 1  d ln#/ + R+2  = 0 g    +   2 d 2# d +

(12.113) (12.114)

where  and # are arbitrary functions. This is a generalisation of the Brans–Dicke theory, which results as the limit # = constant  = 0. It is presented here just as a formal curiosity because it is far from being well understood. Its main weakness is the existence of two arbitrary functions that are not determined by any field equations. The function  becomes the cosmological constant when  = constant.

12.16.3 The conformally invariant Canuto theory The original reference for this theory is Canuto et al. (1977). Its field equations are    2  4  2    1 − g − − R − g R + 2  2  2 =

8 GT  + g

c4

(12.115)

This theory was designed to be such a generalisation of general relativity that is invariant under arbitrary conformal transformations g → 2 g . The left-hand side of (12.115) is indeed invariant under such a transformation; the invariance of the right-hand side is a postulate of the theory. The Einstein theory follows as the limit  = 1. The changes in the energy-momentum tensor induced by the transformation g → 2 g should be compensated by G, which should be determined for every case. It is assumed that GT  = G1T 1, the latter being the right-hand side of the Einstein equations. The arbitrary function  is interpreted as the local change of scale. The physical interpretation of this theory is not quite clear, and the arbitrary function  makes it difficult, just as in the Bergmann–Wagoner theory, to calculate observable effects. The Canuto theory has never really caught on with the physics community and is not currently considered a viable alternative to Einstein’s theory.

12.16.4 The Einstein–Cartan theory In this theory (Trautman, 1972) the connection coefficients are not symmetric. The Ricci tensor is built of the full, nonsymmetric connection coefficients and obeys equations

12.17 Matching solutions of Einstein’s equations

151

formally identical to the Einstein equations (12.21), but R and T are not necessarily symmetric. The torsion tensor Q  obeys a separate set of equations: Q  +   Q  −   Q  = s  

(12.116)

where s  is the tensor describing the stream of energy connected with the spin of matter, and it vanishes in vacuum. When s  = 0, also Q  = 0. Thus, in this theory torsion does not propagate out into vacuum; it may be nonzero only inside matter. With s  = 0, the Einstein–Cartan (EC) theory reduces to the Einstein theory. In vacuum, it is not distinguishable from the Einstein theory. The advantage of the EC theory is that it allows a singularity-free Universe model. (General relativity predicts that every model of the Universe must have a singularity in the past or in the future – see Section 15.3.) However, it has not been accepted as a replacement of relativity, mainly because of the impossibility of distinguishing it experimentally from GR – since all experiments testing GR are carried out in vacuum.

12.16.5 The bi-metric Rosen theory It is not a generalisation, but an alternative to Einstein’s theory (Rosen, 1973). There are two metric tensors in it: g , of the same interpretation as in general relativity, and the flat tensor  , for which the curvature tensor B     ≡ 0. Its field equations are 1 N − g N = T  2

(12.117)

1 1 N =  g  −  g  g  g

 2 2

(12.118)

where

and the vertical stroke denotes a covariant derivative with respect to  . The author’s argument in favour of this theory was its greater simplicity compared to Einstein’s theory. Its experimental predictions are not much different from those of general relativity. When the gravitational field vanishes, g =  . However, a majority of relativists consider the flat background metric  to be an artificial and unnatural element that spoils the elegance of the relativistic approach (the opinion of the author himself was exactly the opposite). Many papers had been published on this theory, but in the end it has not established itself as a viable alternative to general relativity.

12.17 Matching solutions of Einstein’s equations Just as in electrodynamics, in gravitation theory we sometimes have to match solutions of Einstein’s equations obtained separately for different spacetime regions. Most often, we want to determine whether a given vacuum solution can be interpreted as the exterior gravitational field to a material body for whose interior we have found another solution.

152

Einstein’s equations and their sources

Matching results in the arbitrary constants in the vacuum region being determined in terms of the parameters of the interior metric. Sometimes we are interested in describing a surface matter distribution on the boundary between two regions, but we shall exclude this case here. Generally, we assume that there are no singularities of the type of Dirac  function in components of the curvature tensor and that the hypersurface across which we match the two metrics is non-null. (Together with surface matter distributions we thus exclude shock waves in which the discontinuity in the Riemann tensor is matched to vacuum solutions on both sides. Null matching hypersurfaces pose additional problems.) With these assumptions, the components of the Riemann tensor can at worst be discontinuous across the matching hypersurface $. We have to allow discontinuities because, for example, the mass-density on the surface of a perfect fluid body, which equals the component T 0 0 of the energy-momentum tensor in comoving coordinates, is nonzero at the surface, but zero at adjacent vacuum points. In order to discuss these conditions in detail, it is most convenient to use the coordinates adapted to $, the same that were introduced at the end of Section 7.15. This time, N = 4, n = 3, Vn = $, and the spacetime metric in the adapted coordinates is  2 ds2 = gIJ dxI dxJ + N 2 dx4  (12.119) where the x4 coordinate may be timelike (then  = +1) or spacelike ( = −1). The normal vector to the boundary x4 = A = constant is X  = 0 0 0 1/N. For x4 > A we have one + − (e.g. vacuum); for x4 < A we have another g (e.g. the interior of a material metric g body). Since $ has to be the same, whichever of the two 4-metrics is used to describe it, the components gIJ have to be continuous across $. Since on $ they are functions of the xI -coordinates, the same functions no matter which 4-metric is used to calculate the gIJ , the continuity of all the derivatives of gIJ along $, i.e. of the derivatives by xK , is automatically guaranteed, and we need only take extra care about gIJ4 . So far, we have made sure that the boundary hypersurface $ has the same intrinsic geometry in both metrics. However, if the spacetime regions on the opposite sides of $ are to be parts of the same manifold, then $ must have the same extrinsic geometry with respect to both metrics, i.e. be embeddable in both in the same way. Without that, we might end up trying to identify a cylinder with a plane, for example. Hence, the second fundamental form of $ must be the same, whichever of the two metrics is used to calculate it. + − and g , can be considered to describe Thus, finally, the conditions that two metrics, g two parts of the same manifold are as follows: A hypersurface $ must exist such that, in coordinates adapted to $ as in (12.119), the + − $ = g $, and the second fundamental form metrics induced on $ are the same g + − , is used to calculate it. of $ must be the same, whichever metric, g or g Now we will investigate the consequences of these conditions for the Riemann and Einstein tensors of the spacetime and for the Riemann tensor of $. We will use the Gauss–Codazzi equations (7.93)–(7.94), but we will have to adapt the notation. Now Un+1

12.17 Matching solutions of Einstein’s equations

153

is the spacetime (here denoted V4 ) and the Vn of Section 7.15 is the boundary hypersurface $. Thus, the capital Latin indices of Section 7.15 now become the Greek spacetime indices, and the Greek indices of Section 7.15 now become the capital Latin indices for $. The covariant derivative in the Vn of Section 7.15, denoted by a semicolon, now becomes the covariant derivative in $, denoted by the vertical stroke . With X  = 0 0 0 1/N and Y  coinciding with xI in $ for  I = 1 2 3, Eqs. (7.93)–(7.94) become RDABC $ = RDABC V4  +  %AC %DB − %AB %DC   %IJ K − %IK J = −R4IJK V4 /N

(12.120) (12.121)

Since RDABC $ and %AB are continuous across $, RDABC V4 , i.e. the $-components of the 4-dimensional Riemann tensor, will be continuous across $, too. The covariant derivatives of %AB in (12.121) are taken within $, so they are also continuous. This means that R4IJK V4 /N has to be continuous across $, but N and R4IJK V4  individually need not be – they may have a discontinuity that cancels out in the quotient. For completeness, we have now to consider the components R4I4J V4  that are not determined by the Gauss–Codazzi equations. They are R4I4J = N 2 R4 I4J  1 1 1 1 = N 2 − g 44 J g44I − g 44 g44IJ − g 44 4 gIJ4 − g 44 gIJ44 4 2 4 2 ⎤   1 1 r + g 44 g44R + g 44 g RS gRJ4 gIS4 ⎦ 2 4 IJ $

  = N −N IJ + Ng RS %RJ %IS + N%IJS X S

(12.122)

These components contain second derivatives of gIJ by x4 , so they can be discontinuous across $. Now we find for the components of the Einstein tensor: 1 G4 4 = − g IJ RS ISJ  2

G4I = RS 4SI 

1 GIJ = RS ISJ + R4 I4J − gIJ g KL RS KSL − gIJ g KL R4 K4L

2

(12.123)

This shows that G4 4 is continuous across $, while G4I and GIJ can be discontinuous. Note what this means for matching a perfect fluid solution to vacuum across a spacelike hypersurface such that the velocity has no component in the x4 direction. Then G4 4 = p, and since G4 4 = 0 in vacuum and has to be continuous across $, this means that p = 0 must hold on $, which agrees with the expectation based on physics.

154

Einstein’s equations and their sources

12.18 The weak-field approximation to general relativity Although considerable progress has been made in the search for exact solutions of Einstein’s equations (Stephani et al., 2003), real physical or astrophysical situations are often too complicated to be captured by an exact solution. In those cases, one must resort to approximate calculations, for which several methods have been developed. We shall introduce one such method here; it is useful also for interpreting exact solutions because it allows one to recognise the physical meaning of parameters in the metric. The presentation is based on Stephani (1990), where more details can be found. Suppose that the metric includes the Minkowski limit  , write it as g =  + h 

(12.124)

and choose coordinates in which the  has the Lorentzian form    = diag+1 −1   −1 −1. Then   assume   that h is a small correction to  , thus h  1 for all indices     and h h  h for all     and all that also the first and  h =  0. Assume  second derivatives of h are small, i.e. h   1, h   1. Under these assumptions, all terms in the Christoffel symbols and in the curvature tensor that are nonlinear in h can be neglected. This set of assumptions is called the weak-field approximation to the Einstein theory, and the resulting scheme is sometimes called the ‘linearised theory of gravitation’. Within this scheme, it is assumed that the energy-momentum tensor T has its special-relativistic form and obeys the equations of motion in flat space T   = 0

(12.125)

Since the metric h does not appear in (12.125) (there are no covariant derivatives in it), the gravitational field has no influence on the motion of the sources in this approximation. This is a strong qualitative difference between the exact and the approximate theory. If, however, this assumption of no back-reaction holds to a satisfactory degree of precision in a given situation, then the gravitational field generated by a given source can be calculated (approximately) in a much simpler way than in the full Einstein theory. We adopt the convention that all indices are raised and lowered by means of the flat metric  . Since the determinant of g has a form similar to (12.124) (g = −1 + small perturbation), it follows that also g  has the property g  =  + f  , f   1, and that g  =  − h ≡  −   h      1  =  h + h  − h   2  R   =

 1    h − h  + h  − h

2

(12.126)

12.18 The weak-field approximation

155

The linearised Riemann tensor is seen to have all the required symmetries in the indices. The linearised Einstein equations are −

   1   1 h  + h  − h   − h   +  h    − h  = T

2 2 (12.127)

The field equations become simpler when we transform the functions in them by analogy with electrodynamics. We define  h by 1 def  h = h −  h  2 1 h   h =  h −  2 1 h +  h   =  −    2

=⇒  h  = −h   g 

(12.128) (12.129)

and we obtain in (12.127)  h   +  h   +  h   −  h  = 2T

(12.130)

We have not yet specified the coordinates. We carry out the transformation  x = x + b x (12.131)    where, to preserve the property h   1, the functions  to be of  the   b are assumed    same order as h . This means that b b   b , b h   h , b b   h  , and similarly for the derivatives. We will later impose a condition on b that will further simplify the equations. In deriving the formulae below, it must be remembered that it is the full metric g which undergoes a linearised tensor transformation, not  h itself. The  transformation law for h follows by linearising the equations g  = x  x  g . The flat background metric preserves its Lorentzian form in consequence of the assumed approximations.   Assuming that after the transformation  g  is represented in terms of  h still by the rule (12.129), we obtain   h  =  h  − 2b  

  h =  h + b + b −  b 

(12.132)

Calculating /x of the second equation in (12.132) we find   h  =  h  + b 

(12.133)

This simplifies if we impose the following condition on b : b  =  h  

(12.134)

  h  = 0

(12.135)

whereupon

156

Einstein’s equations and their sources

 However, since (12.129) held with  h replaced by  h , so does (12.130), and consequently (12.135) implies that   −2T =  h ≡   h

(12.136)

This is the inhomogeneous wave equation, for which a general formal solution is known. For brevity, we omitted several instructive analogies of the linearised Einstein equations to Maxwell’s equations in electrodynamics. In fact, the whole reasoning leading to (12.136) was inspired by those analogies; they are pointed out in more detail in Stephani (1990). The interesting property of (12.136) is that for each pair of indices  the equation is independent of the others. Thus, a given component of the metric is influenced by just one component of the energy-momentum tensor. This simplifies the interpretation of parameters in the metric when the weak-field approximation can be applied. We shall now decompose the energy-momentum tensor into its physical components. We will be omitting the second tilde over symbols from now on. A formal solution of (12.136) in terms of retarded potentials is the same as in electrodynamics, 1   h t r = − (12.137) T r  t − r − r /cd3 r   2 V r − r  where r are the spatial coordinates of the observer’s location, r are the spatial coordinates of a field point and the volume of integration is the set on which T = 0. Assume now that the volume V is finite and that the observer, located at r, is far from V , thus r  r for all points inside V . Then r − r and 1/ r − r can be expanded in power series with respect to r : 

r − r = r2 − 2r · r + r 2  xI x I xI xJ   I  J 2 = r− (12.138) − 3 x x − r  IJ + · · · r 2r  1 xI x I xI xJ  I J 2 (12.139) 1/ r − r = + 3 + 5 3x x − r  IJ + · · · r r 2r where I J K = 1 2 3. The higher-order terms will not appear explicitly. Then, expand T with respect to t − r − r /c around t − r /c. It is justifiable to truncate the expansion because t − r − r /c − t − r /c ≡  r − r − r /c is small compared with r /c, see Fig. 12.2. Thus T r  t − r − r /c 1 = T r  t − r /c + T˙  r  t − r /cr − r − r  c 1 + 2 T¨  r  t − r /cr − r − r 2 + · · ·

(12.140) 2c Now we substitute (12.138)–(12.140) in (12.137) and truncate the series at terms of order r −5 , remembering that r  r . We also assume that there are no fast motions inside

12.18 The weak-field approximation

157

|r – r′|

r′

r r – r′

– r′

Fig. 12.2. Vectors and distances involved in calculating the linearised metric of a finite body in the weak-field approximation.

the body, so dT /dt/c is of order no larger than 1/r, so the truncation will be done at the combined order r −3 (i.e. at r −3 at T , r −2 at T˙  and r −1 at T¨  ). The result is 1 T r  t − r − r /c

r − r 

  1 xI x I xI xJ   I  J  2 IJ = T + 3 + 5 3x x − r  r r 2r

  1 xI xJ  I  J xI x I xI xJ   I  J 1 2  IJ ¨  + T˙  + x − r  x x 3x + T c r2 2r 4 2c2 r3

(12.141)

(the arguments of T on the right-hand side are r and t − r/c). Now, in calculating the integral in (12.137) it must be remembered that the coordinate x0 is ct and so, if there are no fast motions in the source (which we assume), then T IJ is smaller by one order in v/c than T 0J , and this in turn is smaller by one order than T 00 . We are working within the first-order post-Newtonian approximation (i.e. in the linearised Einstein theory), and the lowest non-special-relativistic correction to T IJ is of the order v/c ≈ r  /r. Accordingly, we have to calculate T 0I and T 00 to orders v/c2 ≈ r  /r2 and v/c3 ≈ r  /r3 , respectively. The following quantities will appear in the calculations (the arguments of T are everywhere the same as in (12.141)): def

M= def

dIJ = def

V



V

bIJ = −

T00 d3 x 

T00 x x d3 x  I

V

J

T 0I x d3 x  J

def

dI =

V

T00 x d3 x  I

def

pI = def

aIJ =

V



V

T 0I d3 x  TIJ d3 x

(12.142)

(all integrals are over the volume V of the body). From the physical interpretation of the components of T we recognise (up to the choice of units, i.e. up to a constant factor) M as the mass of the source, dI as the mass dipole moment, dIJ as the mass quadrupole

158

Einstein’s equations and their sources

moment, pI as the momentum, bIJ as the matrix whose antisymmetric part is the angular momentum and aIJ as the energy-density of stress. The equations of motion can be written as T 0 0 = −T S S

(12.143) 

Integrating these over a volume W containing V , applying the Gauss law W vI I d3 x =  I I v d2 x and taking into account that the surface W lies in vacuum, where T = 0, W we obtain the conservation laws M = constant

for  = 0

pI = constant

for  = I

(12.144)

Applying the same rule to the integral defining dI we obtain 1 ddI I I T 00 0 x d3 x = − T 0S S x d3 x = c dt W W   I T 0S x S d3 x + T 0I d3 x =− W

=−



W

W

0S  I

S

T x d2 x + p ≡ p I

I

(12.145)

def

The quantity BIJ = T 0I x J − T 0J x I is the density of angular momentum. Applying again the same rule to it we obtain def

BIJ = T 0I x − T 0J x = constant

J

I

(12.146)

The momentum pI can be set to zero by transforming the coordinates to the rest frame of the body. This is a Lorentz transformation that does not change the property (12.124) and will change only the numerical values of the other quantities in (12.142), keeping constant those that were constant. With pI = 0, dI becomes constant and can be set to zero by moving the origin of coordinates to the centre of mass of the body. The equation T 00 0 + T 0S S = 0 implies that     I J I J J I T 00 x x 0 + T 0S x x S = T 0I x + T 0J x

(12.147) Differentiating this by x0 and applying (12.143) again, we obtain       I J I J J I T 00 x x 00 = T RS x x RS − 2 T IS x + T JS x S + 2T IJ

(12.148)

By integrating (12.147) and (12.148) over the volume W and applying the Gauss law to eliminate the divergence terms we obtain, respectively, 1 − d˙ IJ = bIJ + bJI  c

1 ¨ IJ d = aIJ

2c2

(12.149)

Thus, bIJ are determined by the angular momentum and the time-derivative of the quadrupole moment, while the stresses are determined by the second time-derivative of

12.18 The weak-field approximation

159

the quadrupole moment. Thus, finally, the quantities M, BIJ and dIJ fully characterise the body, to the desired order of approximation. Substituting (12.141) in (12.137), employing the definitions (12.142) and the relations (12.149), we obtain for the metric  M xI xJ  2  h00 = + 5 3dIJ − dSS IJ  r 2r  xI xJ I J  xx 3d˙ IJ − d˙ SS IJ + 2 3 d¨ IJ  + 4 2cr 2c r J J J 2 B x d˙ x d¨ x −  h0I = IJ 3 − IJ 3 − IJ2 2   2r 2cr 2c r ¨ 2 d −  h = IJ

 IJ 2c2 r

−

(12.150)

Finally, we wish to find the h defined in (12.124). They are calculated from (12.128), and then simplified by a coordinate transformation of the form (12.131), with b given as follows (note that now we do not require these b to obey (12.134) and that they are expressed in the coordinates of (12.150), i.e. in the xs before the transformation):  xI xJ xI xJ  ˙ 2 ˙ SS  d b0 = 4 3dIJ − IJ dSS  + +  d IJ IJ  8r 8cr 3 J J 2 3d x d˙ x 3d xJ xK xI − bI = − IJ3 − IJ 2 + JK 5  4r 2cr 4r   d˙ KL + KL d˙ SS xK xL xI +

8cr 4

−

(12.151)

These were designed so as to cancel the time-derivatives in h00 and h0I to the desired order. The transformed h are h = h − b − b 

(12.152)

and the final result for the linearised metric, up to the desired order (combined order in v/c and r  /r ≈ v/c), is1  2m xI xJ  IJ − 5 3D − DSS IJ + O1/r 4  r 2r J K 2 x P g0I = − IJK 3 + O1/r 3  r   2m 2 gIJ = IJ 1 + + O1/r   r

g00 = 1 −

1

Stephani’s formula for gIJ in Stephani (1990) seems to be incorrect.

(12.153) (12.154) (12.155)

160

Einstein’s equations and their sources

where IJK is the Levi-Civita symbol and the new constants are defined in terms of the old ones as follows: def  IJK JK def  def M m= DIJ = (12.156)  PI =  B  dIJ

8 8 8 For m and DIJ these are just new units, while P I is the vector of angular momentum. The presence of P I in the metric marks an important difference between general relativity and the Newtonian theory of gravitation. Let us take the Minkowski metric in the Lorentzian coordinates, ds2 = −IJ dxI dxJ + dt2 , and let us transform it to the rotating coordinates, in which xI = x I + IKL #K x L t. Assuming that the angular velocity of rotation #K is small and neglecting the terms proportional to #2 , we see1 that g0I is of the same form as in (12.154) (except that the contribution from rotation in (12.154) decreases quickly with distance, because of the r 3 in the denominator). The coordinates of (12.153)–(12.155) become inertial at infinity (r → ), which means that the local inertial coordinate system is rotating with respect to the inertial system of a distant observer. Thus, a rotating body in relativity is dragging the inertial frames with it; this phenomenon is also known as the Lense–Thirring (1918) effect. An experiment to measure this effect in the gravitational field of the rotating Earth, known under the working name ‘Gravity Probe B’, was launched recently (Gravity Probe B mission update, 2004). In contrast, in the Newtonian gravitation there is no direct influence of rotation of the source on the exterior field. There is only indirect influence because the centrifugal force caused by rotation flattens the source, and the changed distribution of mass causes changes in the exterior field (by producing a quadrupole moment).

12.19 Exercises 1. Verify that the Newtonian limit of Eqs. (12.78) are the Euler equations of motion of a perfect fluid  dv/dt = −grad p. Hint. Use the asymptotically Cartesian coordinates in which the metric has the form (12.46)– (12.47), and observe that in these coordinates the 4-velocity u has the form u0 = 1, uI = vI /c, I = 1 2 3. 2. Verify that Eq. (12.79) becomes the continuity equation /t + divv = 0 in the Newtonian limit. 3. Verify that Eqs. (12.82)–(12.83) do indeed represent a solution of the modified Einstein equations (12.80). The energy-momentum tensor is that of a perfect fluid, the velocity field is u = 0 /c. Do the calculation both by the tensor method and by using the Cartan forms. Find ∗

the pressure.

1

Strictly speaking, this approximation is incorrect because the square term in # is multiplied by time, so the error of approximation is cumulative.

13 The Maxwell and Einstein–Maxwell equations and the Kaluza–Klein theory

13.1 The Lorentz-covariant description of electromagnetic field The separation of the electromagnetic field into electric and magnetic fields is not covariant with the Lorentz transformation; it depends on the motion of the observer. In relativity electromagnetic field is described by the antisymmetric tensor of electromagnetic field F . In any fixed coordinate system, the electric field is F 0I = E I 

I = 1 2 3

(13.1)

I J K = 1 2 3

(13.2)

and the magnetic field is 1 H I = IJK FJK  2

The formula inverse to (13.2) is FIJ = IJK H K . If E I and H I are transformed by the Lorentz transformation, then F transforms like a tensor. The change in F implied by a coordinate transformation is interpreted as the relation between the electric and magnetic fields measured by two observers.

13.2 The covariant form of the Maxwell equations In special relativity, the Maxwell equations in vacuum are written as 4  j  c = 0

F   =

(13.3)

F

(13.4)

where j  is the 4-vector of current. Equation (13.3) is equivalent to the set div E = 4  rot H = 4/cj + 1/cE/t and Eq. (13.4) to the set div H = 0 rot E +

1/cH/t = 0, where is the density of electric charge and j is the ordinary current vector. The covariance of the Maxwell equations with the Lorentz transformation is automatically guaranteed by F being a tensor. We also have  I j 0 = c  j = j (13.5) 161

162

Maxwell, Einstein, Kaluza–Klein

In general relativity, the partial derivatives in (13.3)–(13.4) are replaced with covariant derivatives, thus (13.3) becomes F   =

4  j  c

(13.6)

Equation (13.4) need not be changed because the Christoffel symbols cancel out in the combination F . One can define the differential form F = F dx ∧ dx , and then (13.4) becomes dF = 0. This is the condition of existence of a 1-form A such that F = dA, where A = A dx . The consequence (and solution) of (13.4) is thus the existence of the 4-potential A . The continuity equation j   = 0 is an identical consequence of (13.6).

13.3 The energy-momentum tensor of an electromagnetic field The electromagnetic field E H has the energy-density u=

 1  2 E + H2  8

(13.7)

1

E × H 4

(13.8)

its energy stream is s= and its stress tensor is TIJ =

   1 1 EI EJ + HI HJ − E2 + H2 IJ  4 2

(13.9)

Just as we have done with the perfect fluid in Section 12.12, we can now compose these quantities into a 4-dimensional tensor of energy-momentum of electromagnetic field:   1 1 T  = (13.10) F  F  + g  F F   4 4 It has the property T   ≡ 0. This can be written in the equivalent form T  =

1    ∗  ∗  F F + F F   8

(13.11)

1√ −g F  2

(13.12)

where ∗

def

F  =

is called the dual tensor to F  . In this form, it is easy to verify that the energy-momentum tensor does not change when the electromagnetic field is transformed by the following operation:

F = F cos  + ∗ F  sin 

(13.13)

13.4 The Einstein–Maxwell equations

163

where  is an arbitrary constant. This operation is called the duality rotation. Equation (13.13) implies that ∗

F 

= −F sin  + ∗ F  cos 

(13.14)

Consequently, although a given electromagnetic tensor uniquely defines the electromagnetic energy-momentum tensor (13.10), the converse is not true. Given T  , the F  is defined only up to duality rotations. From (13.12) it is seen that the duality operation interchanges the electric and magnetic fields: the electric field of F becomes the magnetic field of ∗ F  and vice versa. The new electric and magnetic fields defined by

F are linear combinations of the old fields defined by F . The second set of Maxwell’s equations, (13.4), is equivalent to ∗

F   = 0

(13.15)

This means that no magnetic monopoles (and currents) exist. The ‘duality-rotated’ ∗

F   ∗

 will not always have this property. But if F  = m = 0, then the inverse duality rotation (Eq. (13.13) with  replaced by −) may sometimes be used to define such an F  for which (13.15) holds. The condition for this to be possible is that the ‘magnetic  F  and the electric current F   are linearly dependent. current’ ∗

13.4 The Einstein–Maxwell equations The energy-momentum tensor of electromagnetic field is a source of a gravitational field on equal footing with the energy-momentum tensor of matter. In the presence of electromagnetic field, the field equations of gravitation are mat em 1 R − g R = T  + T  2 mat

(13.16)

em

where T and T are the energy-momentum tensors of matter and of electromagnetic field, (13.10), respectively. The electromagnetic field must obey the Maxwell equations (13.4) and (13.6). The set (13.4), (13.6), (13.10), (13.16) is called the Einstein–Maxwell equations.   The contracted Bianchi identities R − 21 g  R  = 0 imply the equations of motion mat

T   = 0 for the whole energy-momentum tensor T . In the absence of matter (T = 0) em

and currents (j  = 0), the Maxwell equations (13.4), (13.6) do imply T   = 0. But the converse is not true: the Maxwell equations do not follow from the equations of motion and have to be postulated independently.

164

Maxwell, Einstein, Kaluza–Klein

13.5 * The variational principle for the Einstein–Maxwell equations em

The Maxwell equations follow from the variational principle W = 0, where    em def 1 2 √ def    F = A − A  = d x −g F + A F j W 4 8  c  

(13.17)

i.e. the sourceless Maxwell equations (13.4) are pre-assumed and built into the Lagrangian. The independent variables are the components of the 4-potential A that obey the boundary condition A  = 0. Then, the full set of Einstein–Maxwell equations follows from the variational principle with the action integral    mat em mat 1 2 √   F F + j A + W  (13.18) Wg + W + W = d4 x −g R + 8 c  mat

The independent variables are g , A and matter variables. In vacuum, W = 0 and j = 0.

13.6 * The Kaluza–Klein theory In the 1920s, the only interactions known were electromagnetism and gravitation. Finding a geometric theory that would unite them was thus an attractive goal. The first such attempt was undertaken by Kaluza (1921). Several improvements on this theory were made in later years, but complete success has still not been achieved, as will be seen below. The other basic reference is Klein (1926). The exposition given in this section is based on Appelquist and Chodos (1983). The basic idea of Kaluza was the assumption that our world has five dimensions, that the electromagnetic 4-potential forms the components of the metric tensor along the fifth dimension and that the Einstein–Maxwell equations follow from vacuum Einstein equations in five dimensions. In the formulae below, the capital Latin indices A B C    will run through the values 0, 1, 2, 3, 4, and the Greek indices will run through the values 0, 1, 2, 3. We make the following assumptions (Appelquist and Chodos, 1983). 1. The 5-dimensional metric tensor is ⎞

⎛

⎟ ⎜ ⎟ ⎜ ⎜ g + A A A ⎟ ⎟ ⎜ = GAB  ⎜ ⎟ ⎟ ⎜ ⎠ ⎝ A

(13.19)



where  is a scalar field, A is the electromagnetic 4-potential and g are components of the 4-dimensional metric tensor.

13.6 * The Kaluza–Klein theory

165

2. The vector field k =  4 tangent to the 5-dimensional manifold along the fifth dimension is a Killing field of the 5-dimensional metric tensor, i.e. all components of GAB are independent of x4 . 3. The fifth dimension is not observable since the 5-space is closed in the x4 -direction, and the circumference along it is very small. One of the disadvantages of the theory is visible already here: its formulation is not covariant with respect to 5-dimensional coordinate transformations. The metric (13.19) has the determinant G = det GAB  = g

(13.20)

  where g = det g . Hence ⎞

⎛

−A ⎟  AB  ⎜ g ⎟ G  = ⎜ ⎠ ⎝  −1  −A  + A A 



(13.21)

For the Christoffel symbols and all subsequent quantities we will indicate the dimension of the space to which they refer by a subscript in parentheses. The 5-dimensional Christoffel symbols are     1 1    = +  A F   + A F   − g   A A  2 2  

5

4   1  = F   − g   A  2 4

5   1  = − g    2 44

5   1 1 1 4 = − A A F − A A F +  A A A 2 2 2  

5

+ 

 1  1   A +  A + A + A  2 2

 1 1 1 4 = − A F + A  A +   2 2 2  4

5   1 4 = A   2 44

5

(13.22)

166

Maxwell, Einstein, Kaluza–Klein

The components of the Ricci tensor are now found to be 1 3 3 R 5 = R 4 − F   F + A  F   + A  F   2 4 4 1 1 1 + A F   + A F   −   A A 2 2 2 1 2 1 A A g    +  A A F  F  + 4 4   +

1 1   −   42   2 

(13.23)

1 1 3 1 R 54 = F   −   A +  F   + 2 A F  F  2 2 4 4 1 + A g     4  R 544 = −

1  1 1    + 2 F  F  + g    2 4 4

and the 5-dimensional scalar curvature is 1 1 R 5 = R 4 − −1   + F  F  + 2 g     4 2

(13.24)

The scalar field  is an element of unknown interpretation; no object has been observed in Nature that would be described by it. This was initially seen as a weakness of the Kaluza–Klein theory, before the scalar field became one of the favourite subjects in particle physics. With  = −1/ 2 = constant, the 5-dimensional vacuum Einstein equations R 5AB = 0 reproduce the 4-dimensional Einstein equations with electromagnetic field as a source and the Maxwell equations F   = 0, but impose the additional condition F  F  = 0, which means that E2 = H2 . Thus R 5AB = 0 do not reproduce the Einstein–Maxwell equations in their full generality, and this is another weakness of the Kaluza–Klein theory that remains uncorrected to this day. However, the full Einstein–Maxwell equations may be recovered by the following trick. Take the variational principle for the 5-dimensional vacuum Einstein equations, W 5 = 0, where W 5 =

  5

√ d5 x −GR 5 

(13.25)

13.7 Exercises

167

Since the circumference of the 5-dimensional space along the fifth dimension, , is finite and GAB does not depend on x4 , one can integrate with respect to x4 in (13.25). Using (13.20) and (13.24), we obtain   1 √ W 5 =   4 d4 x −g R 4 − −1   + F  F  4  1   (13.26) + g    22 mat

With  = −1/ 2 = constant j = 0 and W = 0, Eq. (13.26) reduces to (13.15). In this crooked sense, the Kaluza–Klein theory is the unified theory of gravitation and electromagnetism.1 The Kaluza–Klein theory became a prototype for other attempts to unify physical theories. The common idea is to take a multidimensional metric and interpret its components in higher dimensions as physical fields in spacetime. Although none of these theories passed experimental verification, the idea still remains popular and inspires new attempts.

13.7 Exercises 1. Deduce (13.10) from (13.7)–(13.9) by the method of Section 12.12. 2. Show that the duality operation (13.13) has the property   ∗ ∗ F  = −F 

(13.27)

Derive (13.14) from (13.13). Verify that the duality rotation does not change T . mat

3. Verify that in the absence of matter T = 0 the Maxwell equations (13.4), (13.6) and the em

equations of motion T   = 0 imply F  j = 0. Use the Maxwell equations to prove that if j  = 0, then this is possible only with rotating currents for which j = 0.

1

As we showed in Section 12.8, a variational principle with the Lagrangian (13.25) leads to the full Einstein equations (12.21) with T = 0. This result is independent of the dimension of the manifold. The fact that taking the symmetry gAB4 = 0 into account and transforming (13.25) to (13.26) leads to a different set of field equations is an illustration of the remark made at the end of Section 12.8.

14 Spherically symmetric gravitational fields of isolated objects

In this chapter we will be dealing with spherically symmetric gravitational fields generated by isolated objects, such as stars and black holes.1 Just as in Newton’s theory, the spherically symmetric case is a foundation for the description of many phenomena taking place in real, more complicated objects.

14.1 The curvature coordinates In Section 8.9 we showed that the metric form of a spherically symmetric spacetime, in a suitably limited class of coordinate systems, has the form (8.51). The coordinates  and  are spherical coordinates whose values fix a point on a 2-sphere; t and r are arbitrary coordinates whose values are constant on the spheres which are the orbits of the symmetry group. The general form of (8.51) and the formulae for the Killing fields of the O(3) group (8.41) do not change under transformations that are composites of the following two classes: 1. The isometries generated by the Killing fields via Eqs. (8.15)–(8.16). These transformations preserve not just the form (8.51) but also the values of the individual components of the metric – the functions , ,  and  among them. An example of such a transformation is a rotation by the angle 0 around the axis  = /2  = 0 (this axis passes through the centre of the sphere and through a point on the equator). In the   -coordinates, such a rotation is given by   √ N

 = arctan cos 0 cos   − sin 0 sin   sin  def

N = sin2   cos2  + cos 0 sin   sin  + sin 0 cos   2

  cot    = arctan cos 0 tan  + sin 0  cos  1

(14.1)

Spherically symmetric solutions of Einstein’s equations are also applied in cosmology, and these applications will be discussed separately in Chapter 18.

168

14.1 The curvature coordinates

169

2. The transformations (8.52) that preserve just the general form (8.51), but mix the functions , ,  and , and are of the form t = F t r 

r = G t r 

(14.2)

where F and G are arbitrary functions of two variables subject to  F G / t  r  = 0. After such a transformation, ,  and  change as follows:   = F 2 t + 2F t G t + G2 t

(14.3)

  = F t F r  +  F t G r  + F r  G t + G t G r 

(14.4)

  = F 2 r  + 2F r  G r  + G2 r 

(14.5)

while  transforms like a scalar,   t r  =  F G . Thus, choosing the functions F and G appropriately, one can manipulate ,  and , but not . Because of the signature + − −− assumed throughout, the determinant of the metric must be negative,  − 2 < 0

(14.6)

Thanks to this inequality, the equation   = 0 can always be solved for F t , and the solution is  1 F t = (14.7) − ± 2 −  G t   We can thus take an arbitrary G and choose F to obey (14.7). Consequently, we lose no generality when we begin with coordinates in which  = 0 already. Beginning with such coordinates, we see from (14.4) that we can carry out such a transformation, after which   = 0 (but after this transformation, the new   will be nonzero). Achieving   = 0 while  = 0 amounts to solving the equation G r  F t + G t F r  + G t G r  = 0

(14.8)

Thus, G can be chosen arbitrarily, and then (14.8) becomes a linear inhomogeneous partial differential equation for F , for which standard methods of solving exist. We achieved  = 0 in two steps, and in both G was arbitrary. Hence, we can now choose G so as to achieve some further simplification. This is where most textbooks make a mistake – they choose G so that   = −r  2 . But  is a scalar under the allowed transformations. Hence, if  = constant before the transformation, then   =  = constant and no condition can be imposed on it. Thus, the further simplification of the form (8.51) must be considered more carefully. Suppose that we wish to transform the coordinates of (8.51) so that   = 0

2   = −r  

(14.9)

170

Spherically symmetric gravitational fields

When is this possible? From the second of (14.9) we have  r  = − F t r  G t r 



(14.10)

Differentiating this by t and by r  we obtain  F F t +  G G t = 0

√

(14.11) 

 F F r  +  G G r  = −2 − = −2r 

(14.12)

While solving this set for G t G r  , two cases must be considered: • Ia.  G = 0. Then, substituting for G t from (14.11) in (14.3), we obtain  =

F t 2

 G

2

  G 2 − 2 F  G +  F 2 

(14.13)

 > 0, which means that We want t to be the time coordinate, so   G 2 − 2 F  G +  F 2 > 0

(14.14)

This is easily verified to be equivalent to g      < 0

(14.15)

Hence, if  G = 0, then the condition   = −r  2 can be fulfilled only if the gradient of  is a spacelike vector. • Ib.  G = 0. Then, from (14.11), either  F = 0, which means that  = constant (this case will be discussed separately below), or  F = 0 and F t = 0. In this second case, (14.3) implies that   = G t 2 

(14.16)

Hence,   > 0 only if  > 0. With  G = 0,  > 0 implies (14.15). (Equation (14.16) shows that in this case it is r that is the time coordinate before the transformation.) Hence, in either case the following lemma applies: Lemma 14.1 (Case I) The condition   = −r  2 can be fulfilled only if the gradient of  is a spacelike vector. However, there are three other cases in which the set (14.11)–(14.12) cannot be solved at all. We leave it as an exercise for the reader to prove the remaining lemmas. Lemma 14.2 (Case II) If the gradient of  is a timelike vector, then one can choose the coordinates of (8.51) so that 2    = 0

 = −t   (14.17) Lemma 14.3 (Case III) If the gradient of  is a nontrivial null vector, so that g      = 0 but   = 0, then one can choose the coordinates of (8.51) so that   = −r  2 , but this automatically implies   = 0. Hence, it is not possible to simultaneously achieve  =0 because of Eq. (14.6), but it is possible to have in addition   = 0.

14.1 The curvature coordinates

171

(Case IV) When  is constant, no condition at all can √ be imposed on it. The spacetime is then a Cartesian product of a sphere of radius l = − and a 2-dimensional surface with the metric  t r dt2 + 2 t r dt dr +  t r dr 2 . The existence of regions of spacetimes with   being either spacelike or timelike was first noted by Novikov (1962b), who called them R-regions and T-regions, respectively. Case II is ignored by most textbooks, even by those that subsequently describe the extension of the Schwarzschild manifold (see Section 14.9). Cases III and IV are ignored almost universally, with the notable exception of Stephani et al. (2003). The situation of these cases versus the Einstein equations is this: For the vacuum equations with zero cosmological constant, the cases g      < 0 and g      > 0 are complementary to each other; they cover different parts of the same manifold, as we will see in Section 14.9. However, cases III and IV require separate treatment. Case III has been investigated by Foyster and McIntosh (1972). It leads to a contradictory set of equations in pure vacuum, and the solution of the vacuum Einstein–Maxwell equations with this geometry is given in Stephani et al. (2003, Eq. (15.18)). Case IV leads to a contradiction when T = 0 = , but a few solutions of Einstein’s equations for more general sources can be found in the literature. The vacuum solution with  = 0 was found by Nariai (1950), and discussed at some length by Krasi´nski and Pleba´nski (1980). The solutions of the Einstein–Maxwell equations with this geometry and with the source being the vacuum electrostatic field were found by Bertotti (1959) and Robinson (1959); they are compared with the Nariai solution in Krasi´nski (1999). In this chapter, we will deal only with the case g      < 0. We then choose the coordinates so as to achieve (14.9). In order to make subsequent calculations easier, we  = −e2 t r , and then denote   = e2 t r , 

 ds2 = e2 t r dt2 − e2 t r dr 2 − r 2 d 2 + sin2  d2 

(14.18)

This form of the metric still allows a subgroup of the transformations (14.2). Namely, we  = −r  2 after the transformation. Since  have  = −r 2 before the transformation and  transforms like a scalar, this means that r = r  and, consequently, G t = 0 and G r  = 1 in Eqs. (14.3)–(14.5). We also require that  = 0 before the transformation and  =0 after the transformation, so from (14.4) F t F r  = 0

(14.19)

But  = 0 necessarily, or else the metric would be singular. Also F t = 0 because, with G t = 0 already required, the Jacobian of the transformation would be zero. Hence, the consequence of (14.19) is F r  = 0, i.e. the transformations still allowed are t = F t , where F is an arbitrary function of one variable. The coordinates of (14.18) are called curvature coordinates because in them the radial coordinate r is connected with the curvature  of the symmetry orbits in the same way as in the flat space,  = 1/r 2 .

172

Spherically symmetric gravitational fields

14.2 Symmetry inheritance Solutions of nonvacuum Einstein equations give rise to the so-called symmetry inheritance problem, which is the following: to what extent do the sources in the Einstein equations, coded in the energy-momentum tensor, inherit the symmetries of the metric of the spacetime? For a perfect fluid, the matter-density, pressure and velocity field are uniquely determined by the metric tensor. The energy-momentum tensor T is simply a function of the metric, the matter-density and pressure are the eigenvalues of T and the velocity field is the unique timelike eigenvector of T . Hence, if the metric tensor does not change under some transformation, then neither does T , so also the matter-density, pressure and velocity field remain unchanged. However, if the source in the Einstein equations is an electromagnetic field, then, even though the electromagnetic energy-momentum tensor (13.10) does inherit all the symmetries of the metric, the tensor of electromagnetic field F  does not necessarily do the same. The equation £T = 0 puts some limitation on F  , but does not imply k

£F  = 0, and examples of F  not being invariant under the isometries of the metric k

are known (Wainwright and Yaremovicz, 1976; Li and Liang, 1985). However, if T is invariant under the whole group O(3), then so is F  , as proven by Wainwright and Yaremovicz (1976). We will accept this result without re-deriving it, and will make use of it in Section 14.4.

14.3 Spherically symmetric electromagnetic field in vacuum In Section 8.9 we solved the equations £g = 0 for the generators of the group O(3), k

i

given by (8.41). This result can be used in solving the equations £F = 0 for the same k

i

generators. There is one point to be observed: since the metric tensor is symmetric, Eq. (8.49) that had the form g23 + g32 = 0 implied g23 = 0. However, the electromagnetic field tensor is antisymmetric, so (8.49) is identically fulfilled for it, i.e. the component F23 does not have to be zero. Also, because of antisymmetry we have immediately F00 = F11 = F22 = F33 = 0. Knowing this, and proceeding exactly like in Section 8.9, we conclude that only the components F01 and F23 of a spherically symmetric electromagnetic field can be nonzero, and then they must be of the form F01 = f01 t r

F23 = f23 t r sin 

(14.20)

where f01 and f23 are arbitrary functions of two variables. Substituting Eqs. (14.20) in the Maxwell equations in Minkowski spacetime we find that the component F23 plays the role of the exterior field of a magnetic monopole. In agreement with one of the postulates of classical electrodynamics (‘no magnetic monopoles exist’) we would thus tend to assume F23 = 0. However, this is an additional assumption that does not follow from spherical symmetry, but from experiments – Maxwell’s equations do allow such

14.4 Schwarzschild and Reissner–Nordström solutions

173

a solution. We will keep F23 nonzero for a while, and then we will find out that in vacuum the magnetic monopole may be eliminated by the duality rotation (13.13). The second set of Maxwell equations, F  = 0, does not impose any limitation on F01 , but for F23 it implies √ (14.21) f23 = 8 q = constant √ first (the coefficient 8 was introduced in order to simplify later calculations).

√ The   set of Maxwell’s equations in vacuum, F   = 0, may be written in the form −gF  = 0; then they become

2 + 01 

 r e F t = 0 = r 2 e+ F 01 r

(14.22) √



 √ −gF   = 0 identically. The solution of while F 23 = 8 q/ r 4 sin  obeys (14.22) is √ F 01 = 8 ee−− /r 2

(14.23) √ where e is another arbitrary constant (and the coefficient 8 was again introduced for later convenience). Now it may be verified that the duality rotation (13.13) with the   parameter q=0   = − arctan q/e leads to the new field F in which F23 = 0, thus  2 2 and  e = e + q , while the electromagnetic energy-momentum tensor does not change.1 Hence, with no loss of generality we may now assume q = 0 = F23 .

14.4 The Schwarzschild and Reissner–Nordström solutions For calculating the energy-momentum tensor of the electromagnetic field given by (14.23), the following formulae are useful: F0 F  0 = 8 e2 e2 /r 4

F1 F  1 = −8 e2 e2 /r 4

F F  = − 16 e2 /r 4 

(14.24)

the components of F F   that are not listed are identically zero. For the metric (14.18), the most convenient tetrad of differential forms is the orthonormal one e0 = e dt

e1 = e dr

e2 = r d

e3 = r sin  d

(14.25)

By whatever method (preferably, by using an algebraic computer program) we find now that the tetrad components of the Ricci tensor are R 0 0 = e−2   − e−2    + e−2   + 2e−2   /r 2

−e−2  ¨ + e−2 ˙  ˙ − e−2  ˙ 2

R 0 1 = 2e−− /r

˙ 1

(14.26) (14.27)

Many solutions of the Einstein–Maxwell equations include the electric charge and magnetic charge on equal footing, through the combination e2 + q 2 . The generalisation with respect to pure electric charge is thus rather illusory, since the magnetic charge may then be generated/removed/changed by duality rotations and does not influence the geometry of spacetime in an independent way.

174

Spherically symmetric gravitational fields

R 1 1 = −e−2   + e−2    − e−2   + 2e−2  /r 2

+ e−2  ¨ − e−2 ˙  ˙ + e−2  ˙ 2

 R 2 2 = R 3 3 = e−2  −   /r + 1 − e−2 /r 2

(14.28) (14.29)

where  ˙ = /t and  = /r. The nonzero tetrad components of F F   are now found from (14.24) and (14.25): F 0 s F s 0 = −F 1 s F s 1 = 8 e2 /r 4 

(14.30)

We will find the solutions of the Einstein–Maxwell equations with the cosmological constant and with the energy-momentum tensor (13.10), so   1 1 1 (14.31) F F   + g F F 

R − g R + g = 2 4 4 but first we will transform them to a more convenient form. The trace of (14.31) implies R = 4. Substituting this in (14.31) and transforming the result to tetrad components we obtain   1 1 s  Fis F j + gij F F  (14.32) Rij = gij + 4 4 Since gij  = diag +1 −1 −1 −1 , Eqs. (14.30) and (14.32) imply R 0 0 + R 1 1 = 0

(14.33)

Substituting (14.26) and (14.28) in this we obtain 2e−2  +   /r = 0, which solves as  = − + f t

(14.34)

where f t is an arbitrary function. Then, from R 0 1 = 0 we obtain  =  r (so far an arbitrary function). Now recall that the metric (14.18) does not change its form under the transformations t = g t , where g t is an arbitrary function. Consequently, we transform t in (14.18) by

ef t dt

(14.35) t = where f t is the function that appeared in (14.34). The result of (14.35) is as if f t ≡ 0. Hence, with no loss of generality,  = −, and the whole metric tensor √ becomes independent of the time coordinate.1 Moreover, in (14.23) we obtain F 01 = 8 e/r 2 , which means that the electromagnetic tensor is also independent of time. 1

The statement thus obtained is sometimes called the Birkhoff theorem: the spherically symmetric gravitational field in vacuum is static. (Here we have in fact derived a generalisation – our source is a vacuum electromagnetic field.) However, calling it a theorem is rather inappropriate. It follows from straightforward calculations and finds no other application. Moreover, it is, in this formulation, false: it holds only for those spacetime regions where the gradient of  is spacelike.

14.4 Schwarzschild and Reissner–Nordström solutions

175

From the equation R 2 2 = − − 1/ 16 F F  we now obtain, with the help of (14.29) and (14.33): 1 − e−2 + 2re−2  = −r 2 + e2 /r 2

(14.36)

which is easily integrated with the result e−2 = 1 +

C 1 2 e2 + r + 2 = e2

r 3 r

(14.37)

where C is an arbitrary constant. The components i = j = 0 and i = j = 1 of (14.32) now turn out to be fulfilled identically. For the strictly vacuum field ( = 0 = e) we obtain from here g00 = e2 = 1 + C/r

(14.38)

while the consideration of the Newtonian limit indicated that for weak gravitational fields (12.46) should hold. In Newton’s theory, for a spherically symmetric gravitational field in vacuum we have  = −GM/r

(14.39)

where G is the gravitational constant and M is the mass of the source of the field. def Equations (12.46) and (14.39) are consistent with (14.38) when C = −2GM/ c2 = − 2m. Finally then, we found the following solution:

 ds2 = e2 dt2 − e−2 dr 2 − r 2 d 2 + sin2  d2

(14.40) where 2m 1 2 e2 (14.41) + r + 2  r 3 r Special cases of this solution were derived by different authors during the first few years after the theory of general relativity had been published in 1915 and today they are known under different names. The case  = e = 0 was found by Schwarzschild (1916a) and was historically the first exact solution of the Einstein equations ever found.1 A large part of relativistic astrophysics and several experimental tests of general relativity are based on it. The subcase  = 0 was found by Reissner (1916) and Nordström (1918). The subcase m = e = 0 was found by de Sitter (1916). The subcase e = 0 was found by Kottler (1918). In full generality, the metric (14.40)–(14.41) appeared as a subcase of still more general solutions found by Cahen and Defrise (1968) and by Kinnersley (1969). We will mostly deal with the Schwarzschild solution for which e2 = 1 −

e2 = 1 − 1

2m  r

(14.42)

A year later, Droste (1917) presented another, mathematically more elegant, derivation of the same solution and discussed its geometrical properties. His paper was surprisingly insightful and ahead of its time. Consequently, it would be quite appropriate to refer to this metric as the Schwarzschild–Droste solution (Rothman, 2002). An English translation of the Schwarzschild paper was published in Gen. Rel. Grav. 35, 951 (2003), but the editorial note to it makes incorrect claims about its interpretation.

176

Spherically symmetric gravitational fields

Note that for r → 2m this metric apparently has a singularity, since g00 → 0 and g11 → −. However, if we substitute in (14.40) and (14.42) a value r < 2m, then the metric is still nonsingular, but g00 < 0 and g11 > 0, i.e. the r-coordinate becomes time and the t-coordinate becomes a measure of the radial distance. The region r < 2m is the complementary part to r > 2m that was mentioned after Lemma 14.3. In that region g      > 0, and the ‘Birkhoff theorem’ does not hold.1 We will discuss the geometrical and physical interpretation of the spurious singularity at r = 2m in Section 14.11.

14.5 Orbits of planets in the gravitational field of the Sun In general relativity, just as in Newton’s theory, it is assumed that the planets in their motion on the orbits behave like point masses, while their own gravitational fields are weak and can be neglected in comparison with the gravitational field of the Sun. These two assumptions in fact contradict each other. The gravitational field of a point mass is singular at the mass’ position, and so stronger than any exterior field. In Newton’s theory this difficulty is solved by the observation that the centre of mass of any extended body follows the same trajectory as a point body with no self-gravitation would follow. At the centre of mass, the body’s own gravitational field vanishes. In relativity, so far there is not even a generally accepted definition of the centre of mass, although work on this problem is being done. Thus, when we consider the orbits of point bodies in relativity, we are in fact extending the theory into the domain in which it has not been worked out yet. Nevertheless, these results agree with observational tests. We assume that the gravitational field of the Sun is spherically symmetric, that the space around the Sun does not contain electromagnetic fields and that the cosmological constant is zero. This means that the spacetime will be described by the metric form (14.40)–(14.42). The orbits of planets should be timelike geodesics in this spacetime, and hence should be solutions of (5.14), where the derivative D/ds is calculated along dx /ds and x s is the equation of the geodesic. Contracting (5.14) with g dx /ds and using (5.14) in the result, we obtain     D dx dx dx dx d 0= g = g  (14.43) ds ds ds ds ds ds Hence, the quantity g dx /ds dx /ds is constant along every geodesic. This means in particular that its sign cannot change during motion; a geodesic is thus timelike, null or spacelike along its whole length. An orbit of a planet is timelike, so g dx /ds dx /ds > 0 The affine parameter s is determined up to inhomogeneous linear transformations, so for timelike geodesics it can be scaled so that dx dx g = 1 (14.44) ds ds 1

This region is an example of a spacetime with the Kantowski–Sachs symmetry; see the footnote after (10.40). In fact, it is the unique vacuum solution of Einstein’s equations with this symmetry.

14.5 Orbits of planets in the gravitational field of the Sun

177

The affine parameter is then s = c, where c is the velocity of light and  is the proper time of the particle that follows the geodesic. In the calculation of the orbit we wish to use the physical units, so in calculating the Christoffel symbols our time coordinate will be ct. With this, the Christoffel symbols for the metric (14.40)–(14.42) are:    1 m 1 0 =−

= 2 r 1 − 2m/r 11 01   mc2 2m2 c2 1 = 2 −

r r3 00     1 1 = 2m − r = sin2 

22 33     1 2 3 = =

r 12 13     2 3 = − cos  sin 

= cot  33 23 

(14.45)

Hence, the equations of a geodesic are these: 1 2m dt dr d2 t + 2 c = 0

2 ds r 1 − 2m/r ds ds    2  2 1 dt 2 m mc 2m2 c2 dr d2 r + − − ds2 r2 r3 ds r 2 1 − 2m/r ds  2  2 d d 2 + 2m − r + 2m − r sin  = 0

ds ds  2 d 2 d dr d2  − cos  sin  + = 0

ds2 r ds ds ds

c

(14.46)

(14.47) (14.48)

2 dr d d d d2  + + 2 cot  = 0 (14.49) ds2 r ds ds ds ds 

The last equation may be written as d/ds r 2 sin2  d/ds = 0 which is easily integrated with the result J0 d

= 2 ds r sin2 

(14.50)

where J0 is an arbitrary constant. Substituting this in (14.48) we obtain d2  2 dr d J0 2 cos  = 0 + − ds2 r ds ds r 4 sin3 

(14.51)

178

Spherically symmetric gravitational fields

A first integral of this equation is  2 d + J0 2 cot 2  = A = constant r4 ds

(14.52)

We still have the freedom to rotate the axes of the spherical coordinates – the metric is invariant under such rotations, and we have not applied any of them so far. Suppose that at the initial instant on the orbit  s0 = 0 . Rotate the axis of the spherical coordinates so that at s0 the planet is on the equator, i.e. 0 = /2. Then we still have the freedom to rotate the spherical coordinates around the single axis passing through x s0 . Apply this rotation by such an angle that the initial velocity of the planet will lie in the plane of the equator, i.e. d/ds s=s0 = 0. Substituting the initial conditions 0 = /2 and d/ds s=s0 = 0 in (14.52) we obtain A = 0. But A is a sum of two non-negative terms, hence both of them must be zero at all times, which means that  = /2 ∗

(14.53)

on the whole orbit. Substituting (14.53) in (14.50) we obtain

A first integral of (14.46) is

 1−

d J0 = 2 ds r

(14.54)

 dt 2m c = E

r ds

(14.55)

where E is an arbitrary constant. In this way we have made use of (14.48), (14.46) and (14.49). Only (14.47) still remains, but we can replace it by the first integral (14.44). Using (14.53)–(14.55) it becomes  2 dr J2 1 E2 − 02 = 1

(14.56) − r 1 − 2m/r 1 − 2m/r ds which can be written as1   1/2  dr 2m J0 2 2 1− = E − 1+ 2  ds r r

(14.57)

Now we have three first-order equations to solve, (14.54), (14.55) and (14.57). In most situations we are interested only in the shape of the orbit, which is given by (14.54) and (14.57). The third equation gives information on the dependence of coordinates of the planet on time. 1

We omit the minus sign in front of the right-hand side in (14.57) because the resulting solutions describe motions along the same orbits in the opposite direction. In a spherically symmetric spacetime, the reversal of the sense of orbital motion is equivalent to a coordinate transformation (reflection). This is not so when the source of the gravitational field is rotating, where orbital motion can be direct, i.e. with angular velocity parallel to that of the source, or retrograde, i.e. with the two angular velocities antiparallel. We shall meet this problem in the Kerr spacetime; see Section 20.7.

14.5 Orbits of planets in the gravitational field of the Sun

179

If J0 = 0, then, from (14.54),  = 0 = constant, which means that the ‘planet’ falls directly towards the centre of the Sun. We will omit this uninteresting case, and assume J0 = 0. Then (14.54) and (14.57) can be replaced by just one equation:      J0 dr 2 2m J0 2 2 1 − = E − 1 +  (14.58) r 2 d r2 r Now we introduce the new variable  = 1/r and obtain in (14.58)  

 d 2 J0 = E 2 − 1 + J0 2  2 1 − 2m  d

(14.59)

An exact solution of this equation would lead to elliptic integrals. We prefer to solve it approximately, up to first order in the small parameter defined below. For the perturbative calculation, it is more convenient to go one step back and replace (14.59) by a secondorder equation. We differentiate (14.59) by  and obtain

 d2  d  d · 2J0 2 2 = −2J0 2  + 2m 1 + 3J0 2  2  d d d

(14.60)

One special solution of this is d/d = 0, i.e. motion on a circular orbit with r = constant. When d/d = 0, (14.60) becomes m d2  +  = 2 + 3m 2  d2 J0

(14.61)

This equation differs from the corresponding Newtonian equation by the last term that vanishes in the Newtonian limit c → . In order that the first term on the right assumes the Newtonian form GM2 /J 2 in this limit (where M is the mass of the source,  is the mass of the planet on the orbit and J is the orbital angular momentum of the planet), we must assume J0 = J/ mc . To simplify the notation, we denote mc2 2 GM2 def 1 ≡ =

J2 J2 p

3m ≡

3GM def =  c2

(14.62)

In the Newtonian limit,  becomes zero, while p is the parameter of the orbit: the distance from the Sun to the planet at that instant at which the Sun–planet direction is perpendicular to the Sun–perihelion direction. In this notation, Eq. (14.61) becomes d2  1 +  = +  2  2 d p

(14.63)

We will solve this equation approximately, up to terms linear in , taking  as the small parameter. More precisely, since  has the dimension of distance, the small parameter will be the dimensionless number . For the Sun,  ≈ 45 km, while the radius of the Sun is approximately 7 × 105 km, so the planetary orbits of necessity have still larger radii, and  < 064 × 10−5 . Since  and 1/p are comparable,  2  and  2 1/p, and the last term in (14.63) is small compared to all other terms. However, for strongly concentrated objects such as neutron stars or black holes, the orbits may come much

180

Spherically symmetric gravitational fields

closer to r = 0, and the approximation used here becomes invalid. In those cases, one has to resort either to numerical calculations or to calculations with elliptic functions.1 In the zeroth order of approximation, the solution of (14.63) is the Newtonian orbit 0 =

1  + cos  − 0

p p

(14.64)

where  is the eccentricity of the elliptic orbit, which is also a small quantity for all solar planets (for Pluto,  = 02444, for Mercury  = 0205 628; for other planets it is still smaller). In the first approximation, we assume  to be of the form 1 = 0 + 1 , where 1 is of the order of , i.e. 1 = 0 when  = 0. We substitute this  in (14.63), neglect terms of order 2 , and obtain  d 2 1   + 1 = 2 1 + 2 cos  − 0 + 2 cos2  − 0  2 d p

(14.65)

Since we assumed 1 = 0 when  = 0, we must take 1j = 0 as the solution of the homogeneous part of (14.65). The problem is thus to find a special solution of the full inhomogeneous equation. This can be done by textbook methods; the solution is   2   2 1 = 2 1 + + 2  − 0 sin  − 0 + 2 sin2  − 0  (14.66) p 3 p 3p However, the solution 0 + 1 implied by this 1 is seen to be in violent disagreement both with Newton’s theory and with observations. At  = n , n = 1 2 3   , the curve given by (14.66) passes through always the same two points, but in the sectors where sin  − 0 > 0 1 increases systematically with every revolution, with no upper limit, i.e. r → 0 as  → . In the sectors where sin  − 0 < 0 1 decreases systematically with every revolution, with no lower limit, and will at a certain instant cause that 1 = 0, i.e. r → . The term responsible for this unusual behaviour is /p2  − 0 sin  − 0 , which becomes arbitrarily large as  increases. On the other hand, analysing the function on the right-hand side of√(14.59) by the methods of classical mechanics one can prove that with E < 1, J0 > 2 3GM/c2 and the initial  being sufficiently small the solution   must be bounded (see Exercise 4). We conclude that the trouble-causing term must be the first term of a power series representing a bounded function and that in the first order solution to (14.63) we must include that function in full. Going to higher orders of approximation to identify the unknown function is a laborious way of solving the problem, since, with every added order, many new terms appear. We want the solution to reduce to (14.66) only to first order, and any bounded function with this property will do. After some guesswork, the function       − 0 cos 1 − (14.67) p p 1

In real astrophysical situations, orbits are perturbed in so many ways that numerical treatment becomes necessary anyway. Examples: gravitation of other planets, rotation of the star or black hole, lack of spherical symmetry caused by rotation, loss of orbital angular momentum because of friction with interplanetary matter.

14.5 Orbits of planets in the gravitational field of the Sun

181

is found to be the right one. This function is bounded for all values of , but replacing it by the ‘approximation’ linear in  caused the nonsensical behaviour of (14.66). This approximation holds only for a limited range of values of  and becomes divergent when  is allowed to increase without bounds. We will come back to this at the end of this section. Hence, the correct approximation to the solution of (14.63) up to terms linear in  is:      1    2 2  = + 2 1+  − 0 + 2 sin2  − 0  + cos 1 − (14.68) p p 3 p p 3p Since /p 1, the third term on the right dominates over the last one, which can thus be neglected. After the planet has made one full revolution,  →  + 2 ,  does not return to its initial value. Instead, it returns (approximately) to its initial value after the planet has revolved by 2 / 1 − /p > 2 . Consequently, the aphelion and the perihelion move while the planet goes around its orbit, in the same direction in which the planet revolves. Two consecutive perihelia are separated by the angle  = 2 / 1 − /p − 2 = 2 /p + O /p 2 , and the formula for this perihelion shift can be written in three equivalent ways:  ≈

2  6 GM 6 GM 6 GM = = 2 =

p c2 p c b 1 +  c2 a 1 − 2

(14.69)

where b is the minimal distance of the planet from the Sun and a is the semimajor axis of the orbit. The shape of the orbit is shown in Fig. 1.1 (where the value of  is greatly exaggerated). Note that  is larger the smaller b is. Hence, Mercury offers the best conditions for measuring this effect. Since  is very small for a single revolution, but cumulates with time, the most convenient unit to measure  in astronomical practice is not radians per revolution, as in (14.69), but arc seconds per century. In these units, we have  =

C 360 · 60 · 60 6 GM · · 2

T 2 c a 1 − 2

(14.70)

where C = 100 years, T is the orbital period of Mercury and the second factor converts radians to arc seconds. From the tables (Allen, 1973) we find G = 6670×10−8 cm3 g−1 s−2 for the gravitational constant, M = 1989×1033 g for the mass of the Sun, c2 = 8987 554× 1020 cm2 s−2 for the square of the velocity of light, a = 579 × 1011 cm for the semimajor axis of Mercury’s orbit,  = 0205 628 for the eccentricity of Mercury’s orbit and T = 0240 85 terrestrial years for Mercury’s orbital period. Substituting all these values in (14.70) we obtain1  = 4303 arc seconds per century. Equation (14.69) is the famous result (the relativistic perihelion shift) that predicted the orbital motion of Mercury in agreement with astronomical observations. As described 1

Most pocket calculators will probably show a slightly different result, because of inconsistent roundoff errors. The value quoted here as the official result has been obtained by carefully tuning the precision of all factors.

182

Spherically symmetric gravitational fields

in Chapter 1, when this correction is added to the perturbations of Mercury’s orbit by other planets, the sum is in good agreement with the observed value. The observational tests of this effect are done by registering the positions of planets at different instants, reconstructing their orbits in space and determining the positions of perihelia. As mentioned in Chapter 1, the perihelion shift of Mercury had been observed already in the first half of the nineteenth century, and its Newtonian origins were identified by LeVerrier in 1859 (Dicke, 1964). He was also the person who noted the discrepancy between observational results and the prediction of Newton’s theory. It has to be mentioned that in addition to perturbations of Mercury’s orbit by other planets there is one more component in the observed effect: the astronomical observations are carried out from the Earth, so their raw results are expressed in the geocentric reference system. This gives the largest component of the perihelion shift. According to modern observations (Will, 1981; Lang, 1974), the full observed perihelion shift of Mercury is 559974 ± 041 per century, of which approximately 5000 per century is caused by the geocentric reference system, approximately 280 is caused by the gravitational perturbations from Venus, approximately 150 by perturbations from Jupiter and approximately 100 by perturbations from the remaining planets (Will, 1981). The residue is 4311 ± 045 per century (Lang, 1974), which agrees very well with the value calculated from relativity. For other planets, the relativistic perihelion shift is no larger than a few arc seconds per century (Will, 1981). Moreover, their orbits have small eccentricities, so the positions of their perihelia are known with smaller precision and they are less suitable for testing relativity. Now a few comments on the procedure we used to obtain the approximate orbit equation: 1. We were able to recognise that (14.66) is an incorrect solution because we knew from elsewhere what properties the orbit should have. However, perturbative methods are often applied in relativistic astrophysics in situations where nothing is known about the expected result. The experience with Mercury’s orbit should be a warning that one must be careful about drawing conclusions from approximate results. 2. While going to higher orders of approximation, an avalanche of new terms appears. This is typical of all perturbative schemes. Thus, the hope that something useful can be inferred about the exact result by considering consecutive approximations may be illusory in most instances. There are some results, for example, in the third post-Newtonian order of the relativistic two-body problem, but the formulae are so unwieldy that they can be handled only by algebraic computer programs. 3. We emphasise again that the results (14.69)–(14.70) were obtained under the assumption that the radius of the orbit, at every point, is much larger than the gravitational radius of the central body, GM/c2 . They do not apply to those orbits around neutron stars and black holes that come close to the central body.

14.6 Deflection of light rays in the Schwarzschild field

183

14.6 Deflection of light rays in the Schwarzschild field We will now investigate the orbit of a light ray in the spherically symmetric gravitational field. Hence, this time we have to solve the equations of null geodesics in the Schwarzschild geometry. The consideration in the previous section that led to the conclusion that coordinates may be chosen so that  = /2 on the whole orbit remains valid also for null orbits. The only thing that changes is the value of the first integral (14.44); this time g

dx dx = 0 ds ds

Moreover, now s is not time, but just a parameter on the curve. The partly integrated equations of a geodesic are (14.54), (14.56) and    2 2m dr J0 2 2 = 0 − 2 1− E − ds r r

(14.71)

(14.72)

 0, we It can be seen that, with J0 = 0, radial motion is possible here also. With J0 = obtain from (14.55) and (14.72):    r2 2m J0 2 dr 2 = E − 2 1−  (14.73) d J0 r r (We take only the + sign for the square root for the same reason as before.) We will handle this equation by a method similar to the one used in the previous section. Introducing  = 1/r, we obtain   d 2 = E 2 − J0 2  2 1 − 2m  J0 (14.74) d From here, differentiating by ,  d

d d2  · 2 = − + 3m 2  d d d

(14.75)

It is seen that again we have two cases here: either d/d = 0, which means motion on a circular orbit, or d/d = 0, in which case d2  +  =  2

d2

(14.76)

where  = 3m, as before. We solve this equation by the same method as (14.63). In the zeroth (Newtonian) approximation, the solution is 1 1 = 0 = cos  − 0

r R

(14.77)

where R = constant. In the Newtonian limit, r   are the spherical coordinates in the Euclidean space. Then (14.77) is an equation of a straight line passing at the distance R from the point r = 0.

184

Spherically symmetric gravitational fields

In the first approximation we look for a solution in the form 1 = 0 + 1 , where 1 /0 ∝ . The function 1 must then obey  d 2 1 + 1 = 2 cos2  − 0  2 d R

(14.78)

A particular integral of (14.78) is 1 =

   1 + sin2  − 0  2 3R

(14.79)

The full solution of (14.78) up to terms of order  is thus  1   1 = cos  − 0 + 2 1 + sin2  − 0  r R 3R This may be solved for  with the result     3R 82 4 1− 1+ 2 −  ± = 0 ± arccos 2 9R 3r

(14.80)

(14.81)

This orbit has two asymptotes whose directions are calculated from here in the limit r → . The angle between them is (see Fig. 14.1)     82 3R −  (14.82) 1− 1+ 2  = lim + − − − = 2 arccos r→ 2 9R Equation (14.80) is an approximate solution to (14.76), so it will apply only with a limited precision (up to terms linear in ). Hence, we do not have to consider Eq. (14.82) in its exact form – it suffices to take it with the same precision, and then it becomes  =

4 4GM = 2  3R cR

(14.83)

This is another famous result. Before we confront it with observations, we will first rectify a misunderstanding that still lingers in the literature. Some authors wish to calculate the angle of gravitational deflection of a light ray in a quick and easy way, and for that purpose they use a combination of special relativity and Newton’s theory. They assume that a photon of energy E has the mass E/c2 that interacts with the central body by the ordinary law of gravitation. Consequently, the orbit of a light ray is just an orbit of a particle of mass E/c2 . We will show below that the result obtained in this way is exactly half of the correct (verified observationally!) Eq. (14.83). The Newtonian orbit in polar coordinates is given by (14.77). From there    1 R ± = 0 ± arccos −1  (14.84)  r

14.6 Deflection of light rays in the Schwarzschild field A

185 N

φ+ − φ− Δφ R T

L

O

Fig. 14.1. Gravitational deflection of light rays in a spherically symmetric gravitational field. T is the true position of the source of light, A is the apparent position seen by the observer O in consequence of the deflection. According to Newton’s theory, the light ray emitted from T in the direction TN would move along the straight line TN. In reality, and according to relativity, it follows the curve TO. The straight line TN is the asymptote of the initial part of the ray’s path; AO is the asymptote of the final part. L is the deflecting body, R is the distance between the centre of the body L and the Newtonian path of the light ray, + − − is the angle between the asymptotes, calculated from (14.81) as + − − = limr→ + − − , and  is the angle of deflection. The origin of the polar coordinates is at the centre of the deflecting body L;  increases in the clockwise direction.

The deflection angle is thus    1 1 − = 2 arcsin   = lim + − − − = 2 arccos − r→   

(14.85)

For a Newtonian orbit the eccentricity  is  =

1+

2E0 J 2 G2 M 2 3

(14.86)

( > 1 because the orbit is hyperbolic), where E0 is the total energy of the particle on the orbit, J is its angular momentum and  is its mass. In our case the ‘particle’ is a photon moving at the velocity c, so E0 =

1 mc2

2

Hence, in (14.86):

 =

1+

J = mcR

R2 c4  1 G2 M 2

(14.87)

(14.88)

Up to linear terms in GM/ c2 R we thus have from (14.85)  =

2GM

c2 R

(14.89)

i.e. half of the prediction of general relativity. Note that we arranged for the discrepancy to be small: had we taken the special√relativistic equation E = mc2 instead of (14.87), the final result would have been  = 2GM/ c2 R , differing from (14.83) by still more.

186

Spherically symmetric gravitational fields

The lesson to be drawn is this: simplified intuitive arguments constructed by picking out elements of different theories and doing simple arithmetics on them are not guaranteed to lead to correct results. Each physical theory has its inner logic that has to be applied consistently. The same result (14.89) can be derived from the pure Newton theory, without mixing in special relativity; see Exercise 6.

14.7 Measuring the deflection of light rays It can be seen from (14.83) that  is inversely proportional to R, thus the angle of deflection is greater for those rays that approach the central star to within a smaller distance. For a light ray grazing the surface of the Sun, R = 69599 × 1010 cm. Taking this number, and the other quantities in (14.83) as in Section 14.5, we obtain  = 175 . This is the maximum value available in observations.1 For stars other than the Sun the necessary parameters M and R cannot be measured with sufficient precision, and the deflection angles would be much too small to be measured (see later in this section). Planets cause unmeasurably small deflection angles. We discussed the deflection of light rays, but of course the result applies to all kinds of radiation and other objects that move on null geodesics, e.g. X rays,  rays, microwaves and neutrinos, provided the latter do indeed have zero mass. However, during the first decades of the twentieth century the whole of observational astronomy relied on optical observations; other kinds of radiation from space had been either impossible to detect with the technology of those times, or were not yet known. Consequently, in the first attempt to measure the deflection of light in the gravitational field of the Sun optical observations were applied. The attempt was undertaken by Eddington in 1919 (Dyson, Eddington and Davidson, 1920). Observing the light rays that graze the Sun’s surface is possible only during a total eclipse. The idea was this: 1. Find two stars that will be visible at the very edge of the Sun during the eclipse, best of all on opposite ends of the Sun’s diameter. 2. Take a photograph of these stars during the eclipse, with the darkened Sun visible between them. 3. Take a photograph of the same two stars several months later, when the Sun is safely away from them in the sky. 4. Measure the differences between the positions of the stars in the two photographs. 1

Today, gravitational deflection of light is observed also for distant galaxies, in the gravitational lenses. In those configurations, light rays deflected on opposite sides of the deflecting mass intersect on the Earth. However, the gravitational lenses are not useful for testing relativity because the parameters of the deflecting objects – their mass distributions and radii – are not known with sufficient precision. Also, in order to calculate the deflection angle in a gravitational lens correctly, the equation of a null geodesic should be solved in a different geometry – a model of the Universe with an inhomogeneous distribution of matter. No such results are available as yet.

14.7 Measuring the deflection of light rays

187

The geometry of this measurement is shown in Fig. 14.2. With the Sun being away, the observer O sees the two stars at their true positions T1 and T2 , at angular separation 1 . With the Sun between them, the stars are seen at the apparent positions A1 and A2 , at angular separation 2 > 1 . The angle of deflection is  = 2 − 1 . With the technology of 1919, this measurement posed severe technical difficulties. The expected effect was so small that the mechanical deformations of photographic plates during the months when they had to be stored could seriously disturb the result. Total eclipses of the Sun typically occur in the tropical zone – in the oceans or in jungles and deserts, far away from well-equipped observatories. Eddington’s expedition consisted of two groups, carrying out the observations in Sobral in Brazil and on Principe Island in the Guinea Bay off Africa. Reaching such a destination on time is a problem in itself. In addition, one has to carry out precise measurements under field conditions. During an eclipse the temperature of the atmosphere drops rapidly, which causes some turbulence and the cooling of the telescope. The precision achievable under such conditions was limited, but, nevertheless, the effect predicted by relativity was definitely confirmed. The deflection angle measured at Sobral was 198 ± 016 , that on Principe Island was 161 ± 040 (Will, 1981, p. 5). Unlike the anomalous perihelion shift of Mercury that had been known for many years before relativity was created, the deflection of light rays was predicted by relativity. Apart from the old and long-forgotten attempts by Cavendish and Soldner (Will, 1988; Soldner, 1804; Schneider, Ehlers and Falco, 1992), nobody had expected gravitation to influence the propagation of light. Eddington’s positive result catapulted relativity and Einstein personally to the fame and public fascination that they still have today.

A

2

T

2

S T

1

A

1

α2

α1 O

Fig. 14.2. Measuring the deflection of light rays by the Sun by Eddington’s method. When the Sun is away, the observer O sees the stars at their true positions T1 and T2 , at angular separation 1 . Then, the light from the stars reaches the observer along the straight lines T1 O and T2 O. When the Sun S is seen between the stars, their light follows the curved arcs T1 O and T2 O, and the observer sees the images of the stars at the apparent positions A1 and A2 , at angular separation 2 > 1 . The straight lines A1 O and A2 O are tangent to the arcs T1 O and T2 O at the point O. The prediction of relativity is  = 2 − 1 = 175 .

188

Spherically symmetric gravitational fields

Results obtained later from measurements by the same method gave results between 90% and 150% of the relativity value 175 , with formal errors estimated to be 6% to 25%, and unknown systematic errors. Today this measurement is made by a different method. The electromagnetic waves used in the observation are microwaves, and the observing devices are radio telescopes. Three radio sources, denoted by the symbols 0119 + 11 0116 + 08 and 0111 + 02, lie almost exactly on a straight line, inclined at a large angle to the Sun’s yearly trajectory through the sky. (The symbols of the radio sources are their coordinates on the sky, namely the right ascension in hours and minutes and the declination in degrees.) Each year, for about 3 weeks in March/April, the Sun passes in front of the middle radio source, see Fig. 14.3. The other two radio sources are then so far from the Sun’s disc on the sky that their radiation is not measurably deflected. Thus, the real position of the middle radio source relative to the two others is measured when the Sun is elsewhere in the sky and compared with the observed position while the Sun’s edge approaches the line of sight. The Sun is a weak radio source and its own microwave radiation does not disturb the measurement; the object 0116 + 08 can be observed right up to the moment when it vanishes behind the Sun. The only complication is that the plasma in the solar corona also deflects the microwaves. However, the plasma deflection depends, in a known way, on the wavelength of the radiation, while the gravitational deflection is the same for all wavelengths. Thus, carrying out the measurement at two wavelengths suffices to disentangle the two effects. This measurement was carried out for the first time in 1974 by Fomalont and Sramek (1975) at the National Radio Astronomy Observatory in Green Bank (West Virginia). With this method, no expeditions to remote sites are necessary – the whole observation is done under laboratory conditions and so is more precise. It has become customary to quote the observational results in the form of the ratio of the measured quantity to the value P

P

3

P

3

P

2

P

1

2

P

1

Fig. 14.3. Measuring the deflection of microwaves by the Sun. When the Sun is away, the three radio sources P1 P2 and P3 are seen nearly on a straight line (left). The true position of the middle source P2 can then be measured relative to the other two. With the disc of the Sun approaching (right), the image of P2 moves away from the Sun. Its true position (small circle) can then be calculated from the positions of P1 and P2 (which do not change measurably) and compared with the observed apparent position to calculate the angle of deflection. The shift of the image of P2 is exaggerated for clarity.

14.8 Gravitational lenses

189

predicted by relativity. The value 1 means perfect agreement. In the radio-astronomical observation, the deflection was measured to be 1007 ± 0009 (standard error), so the value 1 is within the error bar.

14.8 Gravitational lenses A gravitational lens is a body deflecting light rays that is situated relative to the observer in such a way that the deflected rays intersect at the observer’s position. The theory and observations of gravitational lenses has become a science in itself (Schneider, Ehlers and Falco, 1992), and we will touch on this subject here only very briefly. A gravitational lens formed by a single star is shown in Fig. 14.4. S is the source of light, L is the deflecting star (the lens) and O is the observer; R is the radius of the star, dS and dO are the distances from the lens to the source of light and to the observer, respectively; S and O are the angles filled by the radius R at the position of the source and of the observer, respectively;  is the deflection angle of the ray that grazes the surface of the lens. Neglecting the curvature of space, we obtain, approximately for small angles, R = dS S = dO O 

(14.90)

On the other hand, using (14.83) and Fig. 14.4 we have  = S + O =

4GM  c2 R

(14.91)

From (14.90) and (14.91) we obtain the ‘equation of a gravitational lens’: 1 4GM 1 + = 2 2 dS dO cR

(14.92)

Unlike optical lenses, gravitational lenses do not focus the light rays: the rays flying farther from the optical axis are deflected by smaller angles than are those flying closer to the axis. Hence, it is not possible to ‘view’ anything through a gravitational lens as if it were a magnifying glass – the image is very distorted. Nevertheless, there is

Δϕ S

Δϕs d s

Δϕo

R

O

do L

Fig. 14.4. A spherical star as a gravitational lens. In the approximation used here, the radius of the star, R, equals the distance from the star’s centre to the point where the two straight lines intersect. Everything else is elementary geometry – see the text.

190

Spherically symmetric gravitational fields

some intensification of light: the rays that would have dispersed in the absence of a lens intersect again. Gravitational lenses can thus increase the range of optical observations, and are actually used for this purpose (Schneider, Ehlers and Falco, 1992). Would it be possible for an observer on the Earth to use the Sun as a gravitational lens? Equation (14.92) allows us to answer this question decisively: no. The first rays (those that graze the surface of the Sun) intersect at the distance dO that is smaller the greater dS is. Hence, the minimal dO is calculated from (14.92) in the limit dS → ; it is dmin = cR 2 / 4GM = 82 × 1010 km, while the radius of the Earth’s orbit is 1495 978 92 × 108 km. (The distance dmin is more than 13 times the radius of the orbit of Pluto, i.e. far beyond the Solar System.) Likewise, there is no chance to observe the ‘lensing’ by other stars by measuring the deflection angles. Even for the closest star, which is 4.5 light years away from the Earth, assuming it has the same radius as the Sun, the angle O would  be 34 × 10−3 – too little to be measured.1 By extending the formula (14.83) to intergalactic distances (which is not really correct) we can conclude that galaxies do have a chance to be gravitational lenses, and indeed many such lenses have been observed (Schneider, Ehlers and Falco, 1992). Substituting in (14.92) the mass of our Galaxy, M = 14 × 1011 M and its smallest diameter R = 5 kpc, with 1 kpc = 30857 × 1021 cm, we obtain dmin = 933 × 102 Mpc. According to the Hubble formula the luminosity distance is DL = zc/H0 , where H0 ≈ 50 km s−1 Mpc−1 is the Hubble constant, the distance dmin corresponds to the redshift z ≈ 015. Taking the largest diameter of our Galaxy, R = 30 kpc, we get z = 56. The quasars are in the middle of this range. For a galaxy of diameter 30 kpc at the distance 3 × 104 Mpc the angle O is 02 , which is measureable. Thus, it should be not surprising that most of the observed gravitational lenses are quasars. However, (14.83) and (14.92) do not apply to quasars. The first of them applies (approximately) only in the gravitational field of a single star; the second is an even cruder approximation in the same geometry. The distance from the Earth to quasars is large on the cosmological scale. For calculating the deflection of light over such distances one should consider null geodesics in a model of the Universe. The models usually used in astronomy are the Robertson–Walker (R–W) metrics derived in Section 10.7. But even these are not general enough because they are conformally flat – the relations among null geodesics in the R–W spacetimes are the same as in the Minkowski spacetime. In particular, different null geodesics issued from point A can intersect at B = A only if B is a singular point of the conformal mapping. Then, however, if the null geodesics p and q intersect at B, then so do all the null geodesics in a neighbourhood of p and q – which is not the case with a gravitational lens. Hence, at nonsingular points of a conformally flat spacetime there can be no gravitational lensing. Since gravitational lenses are observed, it follows that the R–W models can apply only on scales at which the ‘particles’ of the cosmic medium are much larger than distances between quasars. This leaves us with just a couple of ‘particles’ with which to build the whole observed region of the Universe. 1

Such ‘microlensing’ has successfully been observed by measuring the changes in intensity of light from more distant stars when they are eclipsed by the lenses.

14.9 The spurious singularity

191

Models that should apply on any finer scale must be conformally nonflat, and hence cannot belong to the R–W family. In astronomical practice, gravitational lenses are described by a sort of geometric optics based on the Newtonian description of propagation of light (Schneider, Ehlers and Falco, 1992). This description is not a theory in the sense that the word ‘theory’ has in physics – rather, it is a collection of heuristic rules. Nevertheless, it gives testable results that are in approximate agreement with observations.

14.9 The spurious singularity of the Schwarzschild solution at r = 2m The Schwarzschild solution given by (14.40) and (14.42) has a singularity at r = 2m = 2GM/c2 : as r → 2m, the component g00 of the metric goes to zero, while g11 becomes infinite. However, for the determinant of the metric, g = −r 4 sin4 , the value r = 2m is not in any way special. Also, the tetrad components of the Riemann tensor, Rijkl , in the tetrad defined by (14.25), are all regular at r = 2m: they are all of the form m/r 3 , where  = 0 ±1 ±2. These facts suggest that the singularity at r = 2m of the solution given by (14.40) and (14.42) is spurious – created by the coordinates used there, and not by the geometry of the manifold.1 To see that this is possible, let us recall the transformation law of tensors: x x (14.93) g  =   g  y y It is seen that if g is regular in the old coordinates at x = x0 , but some of the functions  x /y have a singularity at x = x0 , then some components of g  will be singular at y = y x0 . Such a singularity clearly can be removed by the inverse transformation y  → x . There is no general criterion that would allow one to distinguish a ‘true’ singularity of the Riemannian geometry from a singularity introduced artificially together with the coordinate system.2 However, if a coordinate transformation that removes the singularity is found, then this is proof that the singularity was spurious. For the Schwarzschild solution several such transformations were discovered. The most general of them is the one found (independently and almost simultaneously) by Kruskal (1960) and by G. Szekeres (1960).3 This transformation leads to coordinates that reveal the global structure of the Schwarzschild manifold. 1 2

3

But the singularity at r = 0 is real, as will be seen from the following. If scalars connected with the geometry of the manifold, such as tetrad components of the curvature, become infinite at certain points, then this is an indication that the singularity is genuine. Even so, one must be careful and verify whether these singularities occur within the range of the map. For example, the singularity of the Schwarzschild solution at r = 0 occurs beyond the allowed range of the curvature coordinates, and we can deal properly with that singularity only after introducing coordinates that cover its neighbourhood. The Kruskal–Szekeres transformation was a crowning of a whole series of less general results. Probably the oldest proof that the singularity at r = 2m is spurious was given by Lemaître (1933a), who noticed that in coordinates connected with freely falling observers the surface r = 2m is no obstacle to their motion. (In fact, this interpretation of the Lemaître coordinates was provided much later by Novikov (1964b).) Other transformations removing the spurious singularity at r = 2m were found by Raychaudhuri (1953) and by Finkelstein (1958).

192

Spherically symmetric gravitational fields

Let us write the Schwarzschild solution in the form1   

 2m dr 2 dt2 − − r 2 d 2 + sin2  d2 ds2 = 1 − 2 r 1 − 2m/r

(14.94)

and transform the coordinates as follows:  p = t + 

where def

=

 q = t − 

  dr r = r + 2m ln −1  1 − 2m/r 2m

(14.95)

(14.96)

Then the metric becomes 



 2m d p d q − r 2 d 2 + sin2  d2

ds = 1 − r 2

(14.97)

where r = r  is the function inverse to the  r of (14.96). Since  r > 0 for r > 2m, the transformation (14.96) is invertible in the region in which the Schwarzschild solution was originally defined. The function (14.96) can be formally extended to the values r < 2m, by writing  = r + 2m ln r/ 2m − 1 ; Fig. 14.5 shows a graph of the extension. The inverse functions exist in both domains, r > 2m and r < 2m, but there exists no single inverse function in the domain 0 < r < . Now let us carry out the next coordinate transformation:

 p q = ep/a eq/a ⇐⇒  p  q = a ln p ln q

(14.98)

where a is a constant whose value will be chosen later. In these coordinates we have  

 2m a2 dp dq − r 2 d 2 + sin2  d2

(14.99) ds2 = − 1 − r pq where this time r = r p q ; the transformation  p  q −→ p q is invertible for all positive values of p and q. Now let us substitute (14.98) and (14.95) in (14.99). The result is:   −4m/a 2m 2 −2r/a  r ae −1 dp dq ds2 = − 1 − r 2m

 − r 2 d 2 + sin2  d2  (14.100)

1

Even though the set r = 2m is the boundary of the region covered by the curvature coordinates, Eq. (14.94) still makes sense when 0 < r < 2m. In that region, t becomes a spacelike coordinate and r becomes time. The resulting metric is the unique vacuum Kantowski–Sachs (K–S) spacetime (Kantowski and Sachs, 1966) (see also Sections 8.9, 10.7 and 19.4 for brief descriptions of the K–S metrics). This is the case that is commonly overlooked in textbooks and that was mentioned in Section 14.1, Eq. (14.17).

14.9 The spurious singularity

193

ξ

2m

r

Fig. 14.5. A graph of the function  r = r + 2m ln r/ 2m − 1 .

If we choose a = 4m, then the factor that causes the singularity will cancel out and the result will be

 32m3 −r/ 2m ds2 = − e dp dq − r 2 d 2 + sin2  d2  (14.101) r The hypersurfaces of constant p and of constant q are null, which is not always convenient. In order to go back to ordinary timelike–spacelike coordinates, we now introduce the further new coordinates v and u by:   t 1 r r/ 4m v = p − q ≡ e − 1 sinh

2 2m 4m (14.102)   t r 1 u = p + q ≡ er/ 4m − 1 cosh  2 2m 4m In the coordinates v u   , the metric (14.101) becomes ds2 =



 32m3 −r/ 2m 2 e dv − du2 − r 2 d 2 + sin2  d2  r

(14.103)

By following all the intermediate transformations, it is seen that the transformation t r → v u is single-valued and nonsingular for all r ≥ 2m, so it is invertible. At r = 2m, the transformation is also well defined, but v/r and u/r go to infinity as r → 2m. This is the reason why (14.94) has a singularity at r = 2m.

194

Spherically symmetric gravitational fields

In these coordinates, r can go arbitrarily near the value 0, and the tetrad components of the Riemann tensor still go to infinity as r → 0. This shows that the set defined by r = 0 is a singularity of the geometry. For r < 2m, the transformation (14.102) cannot be carried out, but it can be formally extended to all r > 0 by writing it in the form   r 2 2 r/ 2m u −v = e −1

(14.104) 2m   t v/u = tanh  (14.105) 4m Hence, in the surface of the v u variables, the lines r = constant are hyperbolae, the set r = 2m is the pair of straight lines u = ±v and the lines t = constant are straight lines passing through the point u = v = 0 with different slopes; for t → ± v/u = ±1. The singularity r = 0 is the pair of hyperbolae u2 − v2 = −1. The u v surface thus looks as in Fig. 14.6. The radial null geodesics, which are u ± v = constant in (14.94), are in this figure straight lines inclined at 45 to the axes. The straight lines r = 2m t = ± divide the figure into four sectors. The original curvature coordinates cover only sector I or sector III, but not both at once. The region r < 2m in the curvature coordinates corresponds to sector II or sector IV, but again not to both of them at once. We will use this representation of the Schwarzschild manifold again later. Figure 14.6 is called the Kruskal diagram. It not only provides new useful coordinates for the Schwarzschild solution but is at the same time the maximal extension of the original Schwarzschild spacetime. The incompleteness of the Schwarzschild spacetime as represented in the curvature coordinates was recognised when it turned out that there exist timelike and null geodesics that escape the range of the Schwarzschild map without hitting any singularity. The Kruskal–Szekeres representation of the Schwarzschild solution does not have this defect – any timelike or null (or spacelike, too) geodesic can either be continued to infinite values of the affine parameter, or hits the singularity r = 0. Note that, contrary to what the original Schwarzschild representation would have us expect, the radial null geodesics reaching the observer in sector I come from a different part of the manifold than the one to which the observer can send his light signals, and the singularity set consists of two separate parts. An observer in sector I can never get an answer to a signal that he would send through the hypersurface r = 2m, because any such answer will hit the future singularity. However, observers in sector IV do have such a possibility: after moving into sector II, they can get an answer from sectors I and III to the signals they had sent in sector IV, but they will have no chance to reply. A similar consideration was applied to the Reissner–Nordström solution by Graves and Brill (1960), and the result was even more strange (see Section 14.15). When the electric charge obeys e2 < m2 , there are two hypersurfaces analogous to Schwarzschild’s r = 2m, and the maximally extended manifold consists of an infinite number of copies of a set somewhat similar to the one in Fig. 14.6. The same strange behaviour is found in the Kerr solution that generalises Schwarzschild’s for rotation of the source; we will deal with it in Chapter 20.

14.9 The spurious singularity

195

v H S

I

1

LR

1

1

R R

2

1 1

T

2

I

T

u I T

3

IV LR S

2

2

H

2

Fig. 14.6. The Kruskal diagram of the maximally extended Schwarzschild spacetime. S1 and S2 are the singularities at r = 0; the regions above and below them are not parts of the spacetime. The straight lines H1 and H2 are the event horizons; they divide the plane into four sectors denoted I,   , IV. The curvature coordinates cover only sector I. Curvature coordinates applied inside the horizons cover sectors II and IV, although one does not see then that the two sectors do not coincide. The dotted lines LR1 and LR2 are paths of radial light rays; LR1 passes out from the past singularity S2 and from under the horizon and escapes to infinity, LR2 falls from infinity and is trapped inside the horizon, eventually hitting the future singularity S1 . The hyperbolae R1 and R2 are lines of constant r, one inside the horizon (with r < 2m) and the other outside (with r > 2m). The straight lines T1 T2 and T3 are lines of constant t. Note that, on the horizons, r = 2m and t = , with t = + on H1 and t = − on H2 . This misled some early researchers into believing that the surface r = 2m can never be reached by a material object. But the value of t is not the physical time; t is just a badly behaving parameter used to measure time.

196

Spherically symmetric gravitational fields

14.10 * Embedding the Schwarzschild spacetime in a flat Riemannian space To gain more insight into the geometry of the Schwarzschild manifold, we will now represent it as a subspace of a higher-dimensional flat space. Take first only the 2-surface defined by t = constant  = /2 = constant. It has the metric form

ds2 =

dr 2 + r 2 d2  1 − 2m/r

(14.106)

Since the Schwarzschild metric in curvature coordinates does not depend on time, the Schwarzschild manifold is in these coordinates a family of identical copies of the hypersurface t = constant. Then,  = /2 is exactly the subspace in which motion on timelike and null geodesics occurs (see the text after (14.52)). The surface (14.106) is thus physically important. It can easily be verified that (14.106) is the metric form of the surface in Euclidean 3-space given by the parametric equations r = r

 = 

z2 = 8mr − 16m2

(14.107)

where r  and z are cylindrical coordinates in the Euclidean space. (If x = r cos  y = r sin  and z are the Cartesian coordinates, then the metric of the surface (14.107) in the Euclidean space is exactly (14.106).) The surface defined by Eq. (14.107) is shown in Fig. 14.7. It is generated by rotating the parabola r = z2 / 8m + 2m around the z-axis. For large r the geometry of this surface becomes approximately flat.1 This picture does not leave any place for the region r < 2m – on the other side of the ring r = 2m (which is an intersection of the paraboloid with the plane z = 0) there is another copy of the same sheet. This agrees with the implication of the Kruskal diagram, and once more shows that the curvature coordinates do not cover the whole manifold. The surface shown in Fig. 14.7 coincides with the surface v = 0  = /2 in the Kruskal– Szekeres coordinates because v = 0 at t = 0. From Fig. 14.6 it is seen that the smallest value of r on the surface v = constant  = /2, which is attained at u = 0, is r = 2m. Also from Fig. 14.6 it is seen that on other surfaces with v = constant  = /2, where 0 < v < 1, the smallest value of r (the radius of the smallest ring in the throat) is smaller than 2m, until it becomes zero at v = ±1 (see Eq. (14.104)). For v = constant > 1, the bridge connecting the two sheets disappears; each of those surfaces is composed of two disjoint subsets.

1

Nonetheless, it is not correct to draw this surface as if it were actually becoming a plane far away from the ‘throat’ at z = 0. It is a simple exercise to verify that no asymptotic plane exists for this surface.

14.10 * Embedding in a flat Riemannian space

197

Fig. 14.7. The surface t = constant  = /2 in the Schwarzschild spacetime. The z-axis runs vertically through the middle of the ‘throat’, the r-coordinate is the distance from that axis.

The full 4-dimensional Schwarzschild spacetime can be embedded in a flat 6-dimensional Riemannian space. This was first shown by Fronsdal (1959). The metric form of the 6-dimensional space we will use is ds6 2 = dZ1 2 − dZ2 2 − dZ3 2 − dZ4 2 − dZ5 2 − dZ6 2

where

(14.108)



 t 2m sinh

r 4m   t 2m Z2 = 4m 1 − cosh

r 4m  

2m  2m 2  2m 3 1/2 + dr + Z3 = ± r r r Z1 = 4m 1 −

(14.109)

Z3 > 0 for r > 2m and Z3 = 0 for r = 2m

Z4 = r sin  cos 

Z5 = r sin  sin 

Z6 = r cos 

198

Spherically symmetric gravitational fields

Z3

Z1

Z2

Fig. 14.8. Embedding of the Schwarzschild spacetime in six dimensions projected on the space of the variables Z1 Z2 Z3 . The thick straight lines are the horizons r = 2m; they cross at the saddle where Z1 = Z2 = Z3 = 0. r increases from bottom to top, at r → 0 all Zi go to ± (except when along a curve Z2 = constant). Along the Z2 = 0 curve, limr→0 dZ3 /dZ1 = 1. The curves running horizontally are the Z3 = constant curves; the U-shaped curves are given by Z1 = constant, with Z1 = 0 running through the saddle. The surface is mirror-symmetric with respect to the Z1 = 0 plane, but the back side below the saddle is not shown, for the sake of clarity.

Figures 14.8 and 14.9 show the projections of the 6-dimensional space of variables Z1    Z6 on the 3-dimensional subspaces of the variables Z1 Z2 Z3 (Fig. 14.8) and Z3 Z4 Z5 (Fig. 14.9).1 In order to draw the first projection, one must observe that the surfaces r = constant are surfaces Z3 = constant, and that   2m Z2 2 − Z1 2 = 16m2 1 −

r

(14.110)

so Z2 2 − Z1 2 = constant when Z3 = constant. The surface of the Schwarzschild variables t r is the saddle-shaped surface in Fig. 14.8. The pair of thicker straight lines is the

1

Reconstructing a 3-dimensional structure in a 3-dimensional Euclidean space from projections on different 2-planes is what engineers routinely do. Are you good enough to be an engineer in a 6-dimensional space?

14.10 * Embedding in a flat Riemannian space

Z3

199

Z4

Z5

Fig. 14.9. Embedding of the Schwarzschild spacetime in six dimensions projected onto the space of the variables Z3 Z4 Z5 . r increases from bottom to top, with r → 0 at the tip of the funnel (where Z3 → −, Z4 → 0 and Z5 → 0). The thick circle is the horizon r = 2m.

image of the set r = 2m. Further properties of this surface that are helpful in reading the diagram are      dZ3   dZ3    −→ + 

  1

 dZ  r→  dZ  −→ 2 Z1 =const 1 Zr→0 =0 2

Z1 −→ + 

r→0 Z2 =const

Z3 −→ −  r→0

The surface of the Schwarzschild variables r  in the subspace Z3 Z4 Z5 can be drawn after investigating the properties of dZ3 /dr, where r 2 = Z4 2 + Z5 2 . It is seen that

200

Spherically symmetric gravitational fields

dZ3 /dr > 0, dZ3 /dr −→ + , dZ3 /dr−→0, Z3 −→ +  and Z3 −→ − . This surface is r→

r→0

r→

r→0

shown in Fig. 14.9.

14.11 Interpretation of the spurious singularity at r = 2m; black holes We verified that the Schwarzschild spacetime has no singularity at r = 2m. Nevertheless, this set does have some special properties. Equation (14.57), rewritten in the form 

dr ds

2

   2m J0 2 1−

= E − 1+ 2 r r 2

(14.111)

shows that for r ≤ 2m the derivative dr/ds cannot be zero (note that E = 0 for geodesics that are timelike in the region r > 2m). Hence, if any body enters the region r ≤ 2m with dr/ds < 0, then dr/ds will not be able to change its sign and the motion will be continued right into the singularity at r = 0. If, however, dr/ds > 0 at an initial instant in the region r ≤ 2m, then motion will be continued until values r > 2m are attained, and only then can the recession possibly be reversed to become a fall. Equation (14.72) shows that light rays have the same property. Consequently, material bodies and light rays, once they have crossed the hypersurface r = 2m in the direction of decreasing r, will never be able to turn back and will continue their motion until r = 0, also when J0 = 0. For ordinary astronomical objects, such as the Sun or the Earth, the quantity 2m = 2GM/c2 , called the gravitational radius, is very small compared with the physical radius. For example, for the Sun 2m ≈ 295 km, for the Earth 2m = 089 cm (recall the physical radii: 696 000 km and 6378 km, respectively). The point at the distance 2m from the centre of such an object is hidden deep inside it, where the spacetime metric is different from Schwarzschild’s because it is not vacuum. For such objects, the set r = 2m has no physical meaning. This is why the strange properties of this set had been looked upon as mathematical curiosities well into the 1960s. If the Sun had collapsed to a size r0 ≤ 2m, then the mean density of matter in the Sun would go up to 0 ≥ 185 × 1016 g cm−3 , which is 100 times more than the density inside an atomic nucleus. Note, however, that 2m is proportional to the mass M of the object, while the physical radius r is approximately proportional to M 1/3 (because M = 4/3 r 3 , where  is the mean mass-density in the object). Hence, when M is sufficiently large, 2m increases much faster than r with increasing M. For every finite density such a mass exists, at which the whole object will be inside the radius r = 2m. For  = 1 g cm−3 (the density of water) this mass is equal to 48 × 1041 g ≈ 3 × 108 solar masses ≈ 0002 of the mass of our Galaxy. The corresponding radius is 4.7 astronomical units, which is less than the radius of the orbit of Jupiter. Those objects whose physical radii are smaller than 2m are called black holes because everything that falls into them can never come back out. Note, however, that the theory predicts also the inverse behaviour: objects of radius smaller than 2m may emit matter as long as there is any supply inside. These (so far only hypothetical) objects are called

14.11 Black holes

201

white holes. They can be imagined as the initial cosmological singularity (the Big Bang, see Sections 17.4 and 18.3) still going off at an isolated location. Astronomers have several candidates for black holes among observed objects, and the number of such objects is systematically increasing. It is commonly believed today that every galaxy contains a very massive black hole at its centre. Signatures of such candidate black holes are unusually high energy output in the form of X rays (caused by matter spiralling into the black hole and radiating out energy in consequence of collisions) or unusually high mass concentrated in a small volume (detected through the high orbital velocities of stars in the galaxy). See Frolov and Novikov (1998) for an exhaustive description of the theory and observations of black holes. We will come back to the subject of black holes in Section 18.9, where we will discuss the formation of spherically symmetric black holes in the Universe, and in Chapter 20, where we will briefly discuss rotating black holes. So far, the only sure identification of a white hole is the whole Universe. As we will see in Chapters 16 and 17, in the currently accepted cosmological models the evolution of the Universe begins with an explosion called the Big Bang. In the most commonly used models, those of Robertson–Walker class, the Big Bang is a single event in the spacetime. The process of expansion away from the Big Bang is the time-reverse of the collapse to a singularity, i.e. it is precisely what a white hole should do. In fact, as we will see in Chapter 17, the R–W models are exceptional in almost every possible respect. In more general models (see Chapters 18 and 19), the Big Bang is not a single event, but a process extended in time. In such models, ‘lagging cores’ of expansion may exist that would be visible to distant observers as localised white holes. They were once proposed as the explanation of the energy source in quasars (Novikov, 1964a; Neeman and Tauber, 1967), but this explanation was later abandoned in favour of black holes with orbiting discs of matter. In Newton’s theory of gravitation, the escape velocity from the surface of a spherical object of mass M and radius r is v2 = 2GM/r. Note then that rg = 2GM/c2 is the radius of the object of mass M from whose surface the escape velocity equals the velocity of light. This observation was first made by Laplace in the eighteenth century (Laplace, 1795). Hence, the notion of a black hole had in fact already been introduced then, although the name was coined only in the 1960s.1 The Kruskal diagram allows us to follow an object falling into a black hole. The lines u ± v = constant are intersections of the Kruskal diagram with light cones. Any timelike line (not necessarily geodesic) in that diagram must thus have its tangent inclined to the v-axis at an angle smaller than 45 at every point. Imagine an object proceeding towards the black hole and emitting light signals at regular time intervals. Suppose that they are picked up by an observer resting at r = r0  2m. When the emitter approaches the surface r = 2m, the observer receives the signals at increasing intervals. These intervals tend to 1

However, it is risky to take the analogy between a black hole and Laplace’s ‘dark star’ literally. The surface of the black hole, r = 2m, is absolutely impenetrable from inside out. In Newton’s theory, no object can escape from the ‘dark star’ to infinity, but the surface r = 2GM/c2 is freely traversable in both directions.

202

Spherically symmetric gravitational fields

infinity as rsender → 2m. The signal sent at r = 2m will stay in the set r = 2m for ever. For this reason, this set is called the event horizon. All signals sent at r < 2m will hit the singularity at r = 0. Thus, from the point of view of the distant observer, the process of falling into a black hole lasts infinitely long. The same is true for matter of an object that collapses to form a black hole. Hence, one should not imagine a black hole as a ‘finished’ object existing somewhere out there. A distant observer only has a chance to see a black hole at the stage of formation, as an object whose light is becoming darker and redder until it disappears from sight. Objects falling into a black hole will disappear from sight before they hit the event horizon.1 For an observer who decided to fall into a black hole, the proper time needed to reach the event horizon is finite. This is seen from (14.111), which, for radial motion towards the centre (with J0 = 0), becomes   dr 2m 1/2 2

(14.112) = − E −1+ ds r and then the time of flight from r = r0 to r = 2m is 

2m  2m −1/2 sh = − E2 − 1 − dr r r0

(14.113)

This integral has a well-defined finite value for every r0 < .

14.12 The Schwarzschild solution in other coordinate systems The curvature coordinates were the oldest introduced for the Schwarzschild solution, and in a way the most natural. However, for investigating some advanced topics, in particular the relation of the Schwarzschild solution to other solutions of Einstein’s equations, other coordinates are sometimes more useful. Two coordinate systems are used most often. The first are the isotropic coordinates, in which the subspace t = constant is explicitly conformally flat and in which a large number of nonvacuum generalisations of the Schwarzschild solution was found (Krasi´nski, 1997). Take the Schwarzschild solution in curvature coordinates, (14.40) and (14.42), and transform the r-coordinate as follows:  m 2 (14.114) r = r 1 +   2r The resulting metric is:

2  1 − m/ 2r  2 2  m 4   2 2 2 2  (14.115) ds2 = dt − 1 + + r + sin  d dr d 1 + m/ 2r  2 2r  1

Because of the high symmetry of the Schwarzschild solution, the event horizon in it coincides with two other entities that are in general distinct. One of them is the apparent horizon. The future apparent horizon is a hypersurface in spacetime within which all null geodesics can proceed only towards the singularity, never away from it. As we will see in Chapter 18, in nonstatic spacetimes the apparent horizon and the event horizon in general do not coincide. Then, in gravitational fields of rotating bodies, the infinite redshift hypersurface (IRH) does not in general coincide with the event horizon, as we will see in Chapter 20. From within this hypersurface, light signals arrive at infinity being infinitely redshifted, yet the IRH is freely traversable both ways for material particles and light rays.

14.13 The equation of hydrostatic equilibrium

203

The spurious singularity now appears at r  = m/2. The other important coordinates are sometimes called geodesic coordinates, Lemaître coordinates or Novikov coordinates. They are comoving coordinates of a congruence of radially freely falling observers. The Schwarzschild metric in them is: ds2 = dt2 −

 R r 2 dr 2 − R2 t r d 2 + sin2  d2

1 + 2E r

(14.116)

where the function R t r obeys the equation R t 2 =

2m + 2E r

R

(14.117)

E r being an arbitrary function. A subcase of this coordinate system, corresponding to E = 0, was first introduced by Lemaître (1933a).1 The remaining cases were introduced by Novikov (1964b), who provided the physical interpretation of all cases. Equation (14.117) is the equation of radial free fall in the spherically symmetric gravitational field generated by the mass m, with E r being the kinetic energy of the observer at infinity (and the total conserved energy of the motion). An observer at fixed coordinate r (note that r is in fact arbitrary in this metric; transformations of the form r = f r  do not change it) proceeds with time to other values of R, i.e. is either receding from or approaching the centre of symmetry, in accordance with the equation of free fall. When E > 0, the observers can recede to infinity and still have nonzero kinetic energy there. With E = 0, they can still recede to infinity, but their kinetic energy decreases to zero. With E < 0, the observers can fly away from the centre of symmetry only out to a finite distance, and then fall back. For each sign of E, Eq. (14.117) may be explicitly solved for t R , but for E = 0 the solutions cannot be inverted to define an explicit elementary function R t r . With E ≥ 0, the metric (14.116) has no singularity anywhere apart from R = 0. As mentioned before, this is how Lemaître first noticed that the singularity of the Schwarzschild solution at r = 2m is only an artefact of the coordinates used. The Schwarzschild solution in the form (14.116)–(14.117) emerges as the vacuum limit of the Lemaître–Tolman cosmological model that will be discussed in Chapter 18. Equation (14.117) frequently appears in cosmology – it is the evolution equation that governs the Lemaître–Tolman model and the Friedmann model that is a spatially homogeneous subcase of the former. It is in fact simpler to obtain this form by assuming geodesic coordinates (in which g00 = 1, g01 = 0, other components are those appropriate for a spherically symmetric metric, (8.51)) and solving the Einstein equations.

14.13 The equation of hydrostatic equilibrium We will now investigate the Einstein equations inside a spherically symmetric body of perfect fluid, with the additional assumption that the matter inside the body is at rest in 1

Lemaître’s form was somewhat unreadable because he parametrised his metric in such a way that the limit of zero cosmological constant could not be directly taken.

204

Spherically symmetric gravitational fields

the coordinates of Section 14.1. This assumption means that the velocity field has only the t-component: u = e−  0

u = e   0 

(14.118)

where  t r is an unknown function, while the pressure and density of the perfect fluid are constant along the lines of flow, i.e. depend only on r. Choosing an orthonormal tetrad in which e0  = u (and consequently the tetrad components of u are ui = i 0 ) and using (14.26)–(14.29), we obtain the following set of equations:1   2  1 1 8 G G00 = e−2 (14.119)  − 2 + 2 = 4 

r r r c 2 −−  ˙ = 0

e r   1 2  1 8 G −2 G11 = e  + 2 − 2 = 4 p

r r r c     −  2 G22 = G33 = e−2   −    +   + r G01 =

(14.120) (14.121)

 8 G −e−2  (14.122) ¨ − ˙ ˙ +  ˙ 2 = 4 p c Equation (14.120) implies that  ˙ = 0, like in the Schwarzschild solution. Since p˙ = ˙ = 0, ˙ differentiating (14.121)  f by t we obtain  = 0, i.e.  = f t + g r . Then, the coordinate  transformation t = e t dt gives f = 0 in the new coordinates, and  =  r . Equation (14.119) can now be formally integrated. Assuming that  0 is finite, we obtain 8 G r 2  r  r  dr   (14.123) e−2 = 1 − 4 cr 0 We denote

r def 4 2 M r = 2  r  r  dr   (14.124) c 0 This quantity has the dimension of mass and plays in (14.18) the same role as the mass parameter played in the Schwarzschild solution: if  r ≡ 0 for r ≥ R (i.e. if the surface of the matter distribution is at r = R), then M R is equal to the mass parameter of the Schwarzschild metric. Consequently, we interpret M r as the mass within the sphere of radius r. Note that this mass is smaller than the sum of rest masses of all the particles inside the body. The density of rest mass is  r =  r /c2 , so the sum of rest masses within the sphere of radius r is

4 r √  2 Mrest =  r  −g d3 x = 2  r  r  e r dr   (14.125) c 0 Vol3 r 1

By choosing the metric in the form (14.18) we left aside the cases when the   in (8.51) is a timelike or null vector, or is constant. Those cases do not contain static sources for the Schwarzschild metric, but they cannot be neglected when considering nonstatic sources.

14.13 The equation of hydrostatic equilibrium

205

Since e > 1 (from (14.123)), we have Mrest > M r . This is the large-scale (astrophysical) analogue of the ‘mass defect’ known from nuclear/elementary particle physics: the mass of a bound object is smaller than the sum of masses of its components. The mass defect multiplied by c2 is equal to the energy that would have to be supplied in order to break the object up into separate particles. Using the notation (14.124), we obtain in (14.123) e−2 = 1 −

2GM r  c2 r

(14.126)

The equations of motion T   = 0 must hold in consequence of the field equations, and in the present case they will be first integrals of the field equations. For  = 0 2 3 they are fulfilled identically, while T 1  = 0 implies e−2 p +    + p  = 0, which means that  = −

p  +p

(14.127)

This can be integrated after an equation of state is assumed (necessarily of the form  =  p ). Using (14.126) and (14.127), Eq. (14.121) can now be written as

  G  + p/c2 M r + 4 r 3 p/c2 dp =−  (14.128) dr r 2 1 − 2GM r / c2 r  Equation (14.122) is now fulfilled by virtue of those already solved. Equation (14.128) is called the equation of hydrostatic equilibrium. In the Newtonian limit c →  it becomes GM r dp  =− r2 dr

(14.129)

Comparing (14.129) with (14.128) we see that in relativity the pressure increases the gravitational attraction because it appears in the equilibrium equation as a positive contribution to the mass and mass density. Given the same mass, density and pressure, the gradient of pressure, opposing the gravitational attraction, is greater in (14.128) than in (14.129). The greater pressure gradient implies faster growth of pressure towards the centre of the object, and this increased pressure then requires a still greater gradient. One can thus imagine a situation in which the equilibrium maintained over some time by a certain process (such as energy production in a star) is perturbed, and then the growth of pressure will lead to a loss of stability: no pressure gradient will be able to keep the object static again. A collapse to a size smaller than the gravitational radius rg = 2GM/c2 will then occur, and a black hole will be created. The Newtonian equilibrium equation (14.129) does not allow such a situation: the gradient of pressure needed to maintain equilibrium is determined by the mass density at the distance r from the centre of the object and does not depend on the value of pressure, so the solution exists for every density and mass.

206

Spherically symmetric gravitational fields

14.14 The ‘interior Schwarzschild solution’ We are interested here in providing a material source for the Schwarzschild metric. Equation (14.127) can be integrated after an equation of state, or a distribution of mass density inside the object, has been defined. Various equations of state and mass distributions intended to imitate the real conditions inside various stellar objects are discussed in relativistic astrophysics. Typically, such general equations of state lead to complicated forms of (14.127) that can be integrated only numerically. We will deal here with an example that is unrealistic and of academic interest only, but it illustrates in a simple way the problems encountered while matching matter solutions with vacuum solutions. We assume that  = constant, a constant mass density inside the object. From (14.122)–(14.124) we then obtain: 8 G 2 def e−2 = 1 − r = 1 − Dr 2

(14.130) 3c4 M r =

c2 4 G 3 Dr 3

r = 3c2 2G

(14.131)

def

where we used the abbreviation D = 8 G/ 3c4 = constant > 0. Subtracting (14.121) from (14.122) and using (14.130) we obtain

  1

2 (14.132) 1 − Dr 2   +   − Dr  − 1 − Dr 2   = 0

r √ which is integrated with the result e = C − B 1 − Dr 2 , where B and C are constants. The pressure can now be calculated from (14.121): √ 1 3B 1 − Dr 2 − C p=   (14.133) √ 3 C − B 1 − Dr 2 This pressure obeys (14.128). Hence, we have obtained a complete solution of Eqs. (14.119)–(14.122): 2  √

 dr 2 ds2 = C − B 1 − Dr 2 dt2 − − r 2 d 2 + sin2  d2  (14.134) 2 1 − Dr This is called the interior Schwarzschild solution (Schwarzschild, 1916b). Its characteristic geometric property is conformal flatness (which is not evident in the coordinates of (14.134) – but its Weyl tensor is zero). Now let us verify the matching conditions between (14.134) and the vacuum Schwarzschild solution, (14.40) and (14.42), at the hypersurface given by r = R = constant. The coordinate systems on both sides of are already adapted, so we can use the formalism of Section 12.17. Here, x4 = r. The continuity of the metric components gIJ , I = 4 = J , requires 2  √ 2GM (14.135) C − B 1 − DR2 = 1 − 2

cR and then the continuity of the derivatives of the metric of in directions tangent to is guaranteed, as stated in Section 12.17. Following the recipe of Section 12.17, we require

14.15 * Maximal extension of the R–N solution

207

 2 the continuity √ of gIJ r /N at r = R, where N = 1 − 2GM/ c R in the exterior metric 2 and N = 1 − DR in the interior metric. This imposes two more equations:  √ 2GM 2 1 − DR = 1 − 2

(14.136) cR   √ 2GM 2GM 2 2DBR C − B 1 − DR = 2 2 1 − 2  (14.137) cR cR (The first one results from g22 r /N being equal on both sides of , which implies N being the same on both sides.) The solution of Eqs. (14.135)–(14.137) is  3 1 2GM 2GM C= (14.138) B=

1− 2  D= 2 3

cR 2 2 cR This guarantees that p R = 0; see (14.133).

14.15 * The maximal analytic extension of the Reissner–Nordström solution The Reissner–Nordström (R–N) solution, given by (14.40)–(14.41) with  = 0, can have its spurious singularities at those points where e2 = 0. There are three cases to consider separately: • 1. When m2 −e2 < 0, e2 does not vanish at any value of r, and no spurious singularity exists. This case has no Schwarzschild limit. • 2. When m2 − e2 > 0, e2 vanishes at two different values of r, √ √ r+ = m + m 2 − e 2  (14.139) r− = m − m2 − e2

These are spurious singularities – the tetrad components of the Riemann tensor have well-defined values at those points. In the Schwarzschild limit e → 0, the inner spurious singularity at r = r− collapses onto the genuine singularity at r = 0, while the outer one goes over into the event horizon at r = 2m. • 3. When m2 − e2 = 0, e2 vanishes at just one value of r, r = m. This case has no Schwarzschild limit, either. Similarly, as was done with the Schwarzschild solution in Section 14.9, the spurious singularities of the R–N solution can be removed by a coordinate transformation. Following Graves and Brill (1960), we will show how to remove a spurious singularity in a more general static metric, ds2 = dt2 −

 1 2 dr − r 2 d 2 + sin2  d2



(14.140)

where  r is any function. Like in the Kruskal method of Section 14.9, we begin by introducing the coordinates u t r and v t r in which



  (14.141) ds2 = f 2 u v dv2 − du2 − r 2 u v d 2 + sin2  d2 

208

Spherically symmetric gravitational fields

The functions f , u and v must obey

 f 2 v t 2 − u t 2 =  r



 1

f 2 v r 2 − u r 2 = −  r

u r u t −v r v t = 0

(14.142)

The last equation says that v t /u t = u r /v r . Dividing the first equation by the second and using this, we obtain u t 2 /v r 2 = 2 r . From here and from the last equation in (14.142) we then obtain the set u t =  r v r

v t =  r u r 

(14.143)

This is easily solved if we introduce the new variable r ∗ r defined by dr ∗ /dr = 1/. The general solution is u = h r ∗ + t + g r ∗ − t

v = h r ∗ + t − g r ∗ − t

(14.144)

where h and g are arbitrary functions. A prime will denote derivatives of h and g by their arguments. Using (14.144), we find from (14.142) f2 =

 r 4h r ∗ + t g  r ∗ − t



(14.145)

Any singularity or zero of  r must now be cancelled by the product in the denominator, and the resulting f must be time-independent (success is not guaranteed, but such choices of g  h were proven to exist for the Schwarzschild metric and for the R–N metric). The product h r ∗ + t g  r ∗ − t will be independent of t only if h = Ae r

∗ +t

+ C

g = Be r

∗ −t

+ D

(14.146)

where A, B, C, D and  are arbitrary constants; we shall take A = B and C = D = 0. The formula for f 2 then becomes f2 =

 r  4A2  2 e2r ∗

(14.147)

Now, the constant  must be chosen so that any zero or singularity in  is cancelled. Substituting (14.147) in (14.144) we obtain the formulae for the transformation t r → v u : ∗

∗

∗

∗

u =Aer et + e−t ≡ 2Aer cosh t

v =Aer et − e−t ≡ 2Aer sinh t 

(14.148)

In general, the inverse transformation can be given only implicitly because the formula for r ∗ r cannot be inverted in elementary functions. The inverse transformation is def

∗

F r =4A2 e2r = u2 − v2

t=

1 artanh v/u



(14.149)

14.15 * Maximal extension of the R–N solution

209

where artanh is the inverse function to tanh. Thus, in the v u coordinates, lines of constant t are straight lines through the origin, v/u = constant, and lines of constant r are the hyperbolae u2 − v2 = constant. For the R–N metric in the case e2 < m2 we have 2m e2 r − r+ r − r−

+ 2= r r r2

(14.150)

r+ 2 r 2 ln r − r+ − − ln r − r−  r+ − r− r+ − r−

(14.151)

 = 1− and the expression for r ∗ r is r∗ = r +

With this , we have in (14.147) f2 =

r − r+ 1−2r+

2 / r −r + −

r − r− 1+2r+ 4A2  2 r 2 e2r

2 / r −r + −



(14.152)

As can be seen,  can be chosen so that one of the spurious singularities is cancelled, but not both at once. Let the index i = 1 refer to r+ and i = 2 to r− . To cancel the ri singularity  must be ri − rj i =

(14.153) 2ri 2 where i = j. If we choose  so as to cancel the spurious singularity at r = r+ , then, in the v u coordinates, we can proceed from large r towards smaller r across the set r = r+ . In order to continue further, across r = r− , we then have to go back to the original t r coordinates and transform them to such v u that cancel the second spurious singularity. In the new coordinates, we can continue across r = r− . In order to visualise the extended manifold, we first have to locate the spurious singularities and the true singularity in the v u plane. As can be seen from (14.151) and (14.153), with  = i , the function F r in (14.149) vanishes at at r = ri , so this set, in the coordinate patch that makes it nonsingular, has the equation u = ±v. Note that, just as in the Schwarzschild case, this spurious singularity consists of two lines in the v u plane. At the true singularity r = 0, F r is a positive constant. Hence, in the v u coordinates, the equation of the singular set is u2 − v2 = constant > 0, i.e. it is a pair of hyperbolae that intersect the horizontal u-axis. (Note: unlike in the Schwarzschild spacetime, the hyperbolae here are timelike, i.e. they are rotated by 90 with respect to those of the Kruskal diagram.) Before we draw the picture, we will employ the method known as the Penrose transformation. The v u plane is infinite, and in order to visualise its various properties it is often useful to map it into a finite patch of the plane in such a way that null geodesics go over into null geodesics. This kind of mapping is called the Penrose transformation, and the picture of the spacetime in the new coordinates is called the conformal diagram.

210

Spherically symmetric gravitational fields

The radial null geodesics in the metric (14.141) are du/dv = ±1. Therefore we first go over to the null coordinates p = u + v

q = u − v

(14.154)

and then employ the following Penrose transformation: P = tanh p

Q = tanh q

(14.155)

In the Q P coordinates, the equation of the spurious singularity at u = v is Q = 0, and that of the one at u = −v is P = 0. The v u plane now fits in the square P Q = −1 1 × −1 1, and the null infinities p = ±, q = ± are mapped into the sets P = ±1, Q = ±1. We can introduce the usual time–space coordinates in this square by U = P + Q /2

V = P − Q /2

(14.156)

The spurious singularity that was removed still has the equation U = ±V , while the null infinities (infinities of p and q) become the four straight line segments P = U + V = ±1, Q = U − V = ±1. The image of the true singularity at r = 0 and the lines r = constant   are still hyperbolae, given by equations of the form 2 U + 1/ 2 − V 2 = 1, where  = constant; see Exercise 13. def ∗ Note that the equation of the true singularity, u2 − v2 = 4A2 e2r 0 =  = constant, in the p q coordinates has the form pq = , so the singular set contains the points p = ± q = 0 and p = 0 q = ±, whose P Q coordinates are P = ±1 Q = 0 and P = 0 Q = ±1. These four points thus lie also in the images of null infinities and in the spurious singularities P = 0 or Q = 0. Thus, the spurious singularities r = r+ , the true singularities and the images of infinities do have common points, as will be seen in the picture. Just as in the Schwarzschild spacetime, when we proceed from a point A in the r > r+ region back in time along a p = constant null geodesic and cross the spurious singularity r = r+ at q = 0, we land in a different region of spacetime from that which would be reached by proceeding from A to the future along a q = constant null geodesic. By extending these two kinds of null geodesics, we recover the analogues of sectors I, II and IV of Fig. 14.6. By sending null geodesics back in time from sector II and to the future from sector IV, we can also recover the analogue of sector III. Now, when we are in one of the r < r+ regions, we change back to the t r coordinates, transform them so as to cancel the r = r− spurious singularity, and then carry out the Penrose transformation once more. We draw the new conformal diagrams in such a way that their images of the r = r+ spurious singularities coincide with the r = r+ singularities of the original Penrose diagram (this in fact involves some deformation). The r = r− singularities are now again straight lines and, as before, we find that their conformal images do have common points with the endpoints of the true singularities. In this way, by patching together conformal diagrams of different parts of the original manifold, we arrive at the manifold shown in the rectangle in the centre of Fig. 14.10.

14.15 * Maximal extension of the R–N solution

211

r–

I inf

r+ I

I

inf IV

Fig. 14.10. The conformal diagram of the maximally extended Reissner–Nordström spacetime. Explanation is given in the text.

The thin straight segments in Fig. 14.10 (two of them are marked ‘inf’) are the conformal images of the null infinities, where r → . Timelike and spacelike infinities are the endpoints of the null infinity segments. The thin hyperbolae segments are the r = constant lines; they are timelike for r > r+ and r < r− and spacelike for r− < r < r+ . The thick straight segments are the spurious singularities at r = r+ and r = r− . The hatched hyperbolae segments are the true singularities at r = 0. Roman numbers label sectors

212

Spherically symmetric gravitational fields

analogous to those of Fig. 14.6. Radial null geodesics (none are shown in Fig. 14.10) would be straight lines parallel to the spurious singularities. This shows that the spurious singularities are in fact event horizons: no future-directed null geodesic can cross from sector II to sector I or sector III. Unlike in the Schwarzschild case, the true singularity here is timelike and it leaves open tunnels to the future and to the past. Now we have to decide how to interpret the image within the thick-line rectangle in Fig. 14.10. We note that the upper tunnel (the strip between the true singularities) is a copy of the lower tunnel. We can identify the two tunnels, thus making the extended manifold finite and cyclic in the timelike direction. Alternatively, we can continue to send null geodesics to the future from the upper tunnel and to the past from the lower tunnel, thus constructing more and more copies of the sectors already constructed, and extend the picture indefinitely in both directions, obtaining an infinite chain. It has been said (Carter, 1973) that the identification would result in an acausal spacetime, in which one could send signals to the future and receive the same signals from the past. This, the story goes, would lead to paradoxes such as sending a message that would say ‘do not send any signal if you receive this message’, and then receiving it. However, it must be added that causality could be violated only if the signals arriving from the past were intelligible and recognisable as those that had previously been sent to the future. With a spacetime such as the one in Fig. 14.10 this would not necessarily be the case: while a message would continue through the tunnel to emerge from the past, the time would continue to flow for observers in sectors I and III. The message might re-emerge after a very long time and strongly distorted – too unreadable to influence the observers’ decisions. Current experimental knowledge does not exclude such a possibility – so the identification of the two tunnels does not contradict any laws of physics. The extension of the R–N solution composed of two coordinate patches was first contemplated (and constructed) by Graves and Brill (1960). The infinite mosaic of conformal diagrams shown in Fig. 14.10 first appeared in a paper by Carter (1966a) and was described in more detail in another article by Carter (1973). Just like we did for the Schwarzschild solution, we can consider the embedding of the t = constant  = /2 2-surface in the Euclidean space. This surface has the metric ds2 =

1 dr 2 + r 2 d2

1 − 2m/r + e2 /r 2

(14.157)

and, if this is going to be the metric of the surface z r in the Euclidean space with ds2 = dz2 + dr 2 + r 2 d2 , then  

r

r 1 2mr  − e2  − 1 dr ≡ dr   (14.158) z r = 2 2  2   1 − 2m /r + e /r r − 2mr  + e2 r+ r+ This integral reduces to (14.107) when e = 0. Figure 14.11 shows the comparison of the surface (14.157) with the surface shown in Fig. 14.7. It is seen that the presence of charge makes the throat longer and thinner. Like in the Schwarzschild spacetime, the surface t = constant  = /2 coincides with the surface v = 0 in those u v coordinates that cancel the r = r+ singularity, i.e.

14.15 * Maximal extension of the R–N solution

213

Fig. 14.11. A comparison of the ‘throat’ in the Schwarzschild spacetime at v = 0 (inner curves) and in the R–N spacetime with e2 < m2 at r = r+ (outer curves). The curves are cross-sections of surfaces like the one in Fig. 14.7 with a vertical plane. The mass parameters for both surfaces are the same. The presence of charge makes the throat longer and thinner; with the charge being close to the limiting value ±m, it can be very much longer. In fact, it becomes infinitely long when e2 → m2 ; see the comment after Eq. (14.162).

with horizontal sections of the manifold shown in Fig. 14.10 that go through the crossing of the r = r+ horizons. Unlike in the Schwarzschild spacetime, when we go to higher values of v, the throat never shrinks to a point and the two sheets of the surface never separate. Imagine the v = constant plane being moved upwards from the position at the crossing of the r = r+ horizons. The minimal value of r in the surface first decreases from r+ to r− and then increases to r+ again. Thus, as some authors like to say, the flux of the electric field through the throat prevents it from collapsing to a point; instead the throat pulsates periodically between the radii r− and r+ . The surface v = constant changes its geometry completely as it enters the tunnel between the true singularities – then it does not recede to infinite distances as in Fig. 14.11, but remains finite in extent. Then, with r ≤ r− , embedding the surface with the metric (14.157) in a Euclidean space by the same method as before requires solving the equation z r 2 =

2mr − e2  r 2 − 2mr + e2

(14.159)

A solution will exist only if e2 / 2m ≤ r ≤ r− , because for r < e2 / 2m the right-hand side of (14.159) is negative. The other part of the t = constant  = /2 surface can be embedded in a flat 3-space with the indefinite metric dr 2 + r 2 d2 − du2 . The solution of (14.159) with e2 / 2m ≤ r ≤ r− is z r = ±

 r r−

2mr  − e2 dr   r  2 − 2mr  + e2

(14.160)

214

Spherically symmetric gravitational fields

With r < e2 / 2m , the solution for u r is ⎡ ⎤  2  r 2 − 2mr  e e u r = ± ⎣z − dr  ⎦  2m r  2 − 2mr  + e2 0

(14.161)

The surfaces v = 0 corresponding to the function z r defined by (14.160) and to the function u r defined by (14.161) are shown side by side in Fig. 14.12. The same graphs, placed in the right positions and adjusted to the scale of Fig. 14.11, are shown in Fig. 14.13.

Fig. 14.12. Embeddings of the v = 0 surface that passes through r = r− . The figure on the left corresponds to the function z r defined by (14.160) and an embedding in an ordinary Euclidean 3-space; the figure on the right corresponds to the function u r defined by (14.161) and an embedding in a flat 3-space with the indefinite metric of signature + + − . The ‘equator’ of the left surface corresponds to r = r− ; the upper and lower ends of the left surface correspond to r = e2 / 2m , where the embedding in the Euclidean space breaks down. The tips of the right figure correspond to the singularity at r = 0; the gap between the two parts of the figure has its edges at r = e2 / 2m , where the embedding in this space also breaks down.

Fig. 14.13. Cross-sections of the surfaces of Fig. 14.12 transformed to the scale of Fig. 14.11 and placed in the correct positions with respect to the r = r+ surface. The horizontal lines separate the part embedded in a Euclidean space (between them) from the part embedded in the space with indefinite metric.

14.15 * Maximal extension of the R–N solution

For the extreme case e2 = m2 the metric can be written as  r − m 2  r 2

 ds2 = dt2 − dr 2 − r 2 d 2 + sin2  d2  r r −m

215

(14.162)

Note that this case is indeed essentially different from the case e2 < m2 . In the latter, the invariant radial distance from any point with coordinate r to the nearest spurious r   singularity (for r > r+ the distance is equal to ! r = r+ r  / r  2 − 2mr  + e2 dr  ) is

finite. With e2 = m2 , the invariant distance from any point r = m to the spurious singularity r = m is infinite, as may be verified from the above. In order to find the extension, we consider the surface  = constant  = constant, and write the metric as  r 2    r − m 2   r 2  2 dt − dr dt + dr  (14.163) ds = r r −m r −m We introduce the null coordinates p and q by p = t + "

q = t − "

2 r m2 def " = dr = r − m − + 2m ln r − m  r − m 2 r −m The metric then becomes  

 r − m 2 ds2 = dp dq − r 2 d 2 + sin2  d2  r r=r p q

(14.164)

(14.165)

The sets r = m  = constant  = constant are seen to be composed of radial null geodesics, so in the p q coordinates they are represented by lines parallel to p = constant or q = constant. The metric is regular for all real values of p and q, and the spurious singularity at r = m lies at p = − and q = + when approached from r > m, and at p = + and q = − when approached from r < m, but these two regions are covered by two different infinite coordinate patches. The infinity r =  is at p = + and q = − in the first patch. The singularity r = 0 lies on the straight line p − q = 4m ln m in the second patch. We bring the infinite values of p and q to finite distances by the transformation p = tan P

q = tan Q

(14.166)

In this way, the images of r = m in the two patches can be laid side by side; they are now at P = − /2 and Q = /2 in the r > m patch, and at P = /2 and Q = − /2 in the r < m patch. The infinity is at P = /2 and Q = − /2 in the r > m patch. The singularity is at tan P − tan Q = 4m ln m in the r < m patch. Note that, just as in the case e2 < m2 , the image of the singularity includes points at which simultaneously P = Q = /2 and those where P = Q = − /2, i.e. the singularity has common points with the images of the spurious singularity. However, this time the singularity will have no common points with the infinities. Putting all those bits of information together, we obtain the infinite chain of conformal diagrams shown in Fig. 14.14.

216

Spherically symmetric gravitational fields

Fig. 14.14. Conformal diagrams for the maximal extension of the extreme R–N metric, with e2 = m2 . The thin straight segments are the images of the null infinities, where r → . The thin hyperbolae segments are r = constant lines; this time they are timelike except the r = m lines that are null. The thick straight segments are the spurious singularities at r = m; they are again event horizons. The hatched curve segments are the true singularities at r = 0; they are timelike, too. Just as in the e2 < m2 case, we can choose to identify the square at the bottom with the next one up.

The extension of this case and Fig. 14.14 were first presented by Carter (1966a, 1973). Just like we did for the Schwarzschild metric and for the R–N solution with e2 < m2 , also in the present case we can embed the surface t = constant  = /2 in a flat 3-dimensional space. As in the previous case, the embedding is different on each side of the spurious singularity r = m, and again the region with r < m cannot all be embedded in a Euclidean space. From d z r

2 + dr 2 + r 2 d2 = r 2 dr 2 / r − m 2 + r 2 d2 we obtain

14.16 * Motion of particles in the R–N spacetime

217

Fig. 14.15. Embeddings of the t = constant  = /2 surface of the extreme (e2 = m2 ) R–N metric. Left: the embedding of the part r > m. The funnel is infinitely long downwards, and it approaches asymptotically from the outside of the cylinder of radius m as r → m. It goes infinitely far outwards and upwards. Right: the embedding of the part 0 ≤ r < m in a flat 3-space. The upper surface goes infinitely far upwards and approaches asymptotically from the inside of the cylinder of the same radius m as r → m. The surface is cut off at r = m/2 (where z = 0) because the remaining part cannot be embedded in a Euclidean space. The lower cone is the embedding of the part r ≤ m/2 in the pseudo-Euclidean 3-space with the metric −d u r

2 + dr 2 + r 2 d2 . It is cut off at r = m/2, and its vertex touches the singularity at r = 0.

for the regions r > m and m/2 ≤ r < m:   √ √   √ m  r − m/2 − m/2   ln √ z r = 2m 2 r − m/2 + √ 2  r − m/2 + m/2 

(14.167)

This tends to − at r → m, to + at r →  and to 0 at r → m/2. For r ≤ m/2, we can embed the surface t = constant  = /2 in a flat 3-space with the indefinite metric −d u r

2 + dr 2 + r 2 d2 ; the equation of embedding is   √  m/2 − r − m/2 arctan 1 − 2r/m  (14.168) u r = −2 2m This tends to 0 at r → m/2 and to the finite value −m /2 at r = 0. The embeddings are shown in Fig. 14.15.

14.16 * Motion of particles in the Reissner–Nordström spacetime with e2 < m2 This section is mostly borrowed from Graves and Brill (1960). A free particle in a gravitational field moves on a geodesic x = x s , where s is an affine parameter along the trajectory. The geodesic equation D2 x /ds2 = 0 is a

218

Spherically symmetric gravitational fields

generalisation of the Newtonian statement that the acceleration along the trajectory of free motion is zero.1 A charged particle moving in a combined gravitational–electromagnetic field will experience a force acting on it. In the particle’s rest frame, the force is qE, where q is the particle’s charge and E is the intensity of the electric field. In agreement with (13.1), the electric field consists of the components F 0I of the electromagnetic tensor, and these components in the rest frame of the particle are F   dx /ds, where dx /ds is the particle’s velocity. Thus, the acceleration of such a particle will equal the force divided by the particle’s mass. Putting all this together, the equation of motion of a charged particle in a gravitational–electromagnetic field is    d 2 x q  dx dx  dx F =

(14.169) + √  ds2 ds  ds ds 8  √ where  is the mass of the particle and the factor 1/ 8 was introduced in order to simplify the subsequent formulae (it merely redefines the unit of charge). By (14.23), (14.40) and (14.41), the electromagnetic tensor in the R–N solution has only two nonzero √ components, F 01 = −F 10 = 8 e/r 2 . Knowing this, we find that two of the equations in the set (14.169) (those corresponding to  = 2 and  = 3) coincide with (14.48) and (14.49), so Eqs. (14.53)–(14.54) remain in force. Using this result, the remaining two equations are d2 t dt dr 1 qe dr +  r =− 2

2 ds  ds ds r  ds     2   dt 2 1 dr 2 d d2 r 1 qe dt  − r + − =− 2



r 2 ds 2 ds  ds ds r ds

(14.170) (14.171)

where we denoted 2m e2 (14.172) + 2 r r Multiplying (14.170) by 2 dt/ds, (14.171) by −2 dr/ds / and adding the results, we obtain an equation that is easily integrated with the result  2   dt 1 dr 2 J0 2  − − 2 = 

(14.173) ds  ds r  = 1−

where  is a constant of integration. This is the same integral that exists for geodesics; it says that the tangent vector to the trajectory has a constant length. By adjusting the affine parameter, the constant can be made equal to 1. We shall keep the symbol , however, because later we will use (14.173) for null geodesics, for which  = 0. Equation (14.170) can be integrated with the result 

1

dt qe = + #

ds r

See Section 15.2 for the definition of acceleration in relativity.

(14.174)

14.17 Exercises

219

where # is a constant of integration. Using this to eliminate dt/ds from (14.173), we obtain  2   1 qe 1 dr 2 J2 +# − =  + 02  (14.175)  r  ds r Since  = +1, this shows that the turning points of the trajectory dr/ds = 0 can exist only outside the outer horizon r > r+ and inside the inner horizon r < r− , where  > 0. We now rewrite (14.175) in yet another form:  2  2    dr 2m e2 qe J2 + # −  + 02 + 2  1− (14.176) = ds r r r r The motion can take place only in those regions where the right-hand side of (14.176) is positive. With J0 = 0, however, there is the term −J0 2 e2 /r 4 that will always dominate over the other terms when r → 0, and will render the right-hand side negative. Thus, the neighbourhood of r = 0 is inaccessible for motion, which means that no charged particle can ever hit the central singularity. This conclusion still holds with J0 = 0, provided q 2 < 2 – then the dominating term is q 2 /2 −1 e2 /r 2 . This means that even a radially moving charged particle will be repelled by the singularity, provided its charge is small enough compared to the mass, irrespective of the signs of the charges of the particle q and of the R–N black hole e . Strangely enough, the conclusion continues to hold for neutral particles for which q = 0, even with J0 = 0. Then the dominating terms are −J0 2 e2 /r 4 and −e2 /r 2 , respectively. Thus, a charge on matter creates effective antigravitation – repulsion that, in spite of its electromagnetic origin, acts also on electrically neutral particles. We will come back to this in Section 19.3 and 19.3.3, where we will discuss the gravitational and electric fields inside a charged dust sphere. Equation (14.176) can be used to calculate the time it takes to reach the horizon r = m along a timelike radial geodesic in the special case e2 = m2 . In spite of the infinite distance to this horizon within a t = constant space, the time along a timelike geodesic turns out to be finite. The same is true for the value of the affine parameter along a null geodesic; see Exercise 14 for both results. Thus the manifold of the extreme R–N metric in the original R–N coordinates is indeed incomplete. Equation (14.176) implies that the inner turning point of a radial trajectory of a charged or uncharged particle (the value of r at which, with J0 = 0, dr/ds = 0 and the motion reverses from fall to escape) is always within the inner horizon, i.e. at r < r− ; see Exercise 15.

14.17 Exercises 1. Prove that (14.1) is indeed a rotation around the axis  = /2  = 0 (e.g. find the corresponding Killing field and transform it to Cartesian coordinates). Verify that the components of the metric (8.51) do not change after the transformation (14.1). 2. Prove Lemmas 14.2 and 14.3.

220

Spherically symmetric gravitational fields

3. Prove that the duality rotation (13.13) with the parameter  = − arctan q/e does indeed transform the electromagnetic field (14.23), (14.21) and (14.20), with the metric (14.18), into  2 + q2 .   a new field for which the magnetic charge q = 0 and the new electric charge is e = e √ 4. Prove that, with E < 1, J0 > 2 3GM/c2 and the initial  being sufficiently small, the solution   of (14.59) must be bounded. Hint. Assume (14.59) to be the equation of energy conservation on a Newtonian orbit in the

 potential − 1 + J0 2 /r 2 1 − 2m/r . Consider the possible shapes of this potential depending on J0 . Consider the orbital motion in various ranges of the total energy E. 5. For a light ray on a circular orbit d/d ≡ 0 in (14.74), so the radius of this orbit must obey E 2 r 3 − J0 2 r − 2m = 0. This equation has at most two positive roots. Most of these orbits are unstable: any perturbation will cause the light ray to go around an orbit on which r oscillates between a maximal and a minimal value. Find the condition that J0 m and E must obey for circular photon orbits to exist. Show that only one of them is stable, with radius r = 3m. Hint. Use the same method as in the previous exercise. At the radius of the stable circular orbit the function E 2 − J0 2  2 1 − 2m has a zero and a local minimum. 6. Prove that the same (incorrect) result (14.89) for the deflection of light rays can be obtained by purely Newtonian methods. Hint. Consider a hyperbolic orbit in polar coordinates, Eq. (14.77), where the geometric parameters of the orbit, p and , are connected with the physical parameters by Eq. (14.86) and p = J 2 / GM2 . Calculate the deflection angle as in (14.85). Then replace the geometric parameters by the physical ones. Note that J = mRvR , where R is the smallest distance between the particle and the central star, and vR is the velocity at the point of smallest distance. Calculate vR by equating the energy at that point to the energy at infinity, 21 v 2 . Note that the value of the deflection angle does not depend on the mass . Assume that the ‘particle’ is a photon and that v = c. Finally, calculate the result up to linear terms in GM/c2 . Remark. This is how the angle of deflection of a light ray was calculated by Cavendish in the eighteenth century, in unpublished notes (Will, 1988), and by von Soldner in 1804 (Soldner, 1804; Schneider, Ehlers and Falco, 1992). Einstein himself found at first this incorrect result, before he formulated his field equations (12.21). 7. Calculate the tetrad components Rijkl of the Riemann tensor for the Schwarzschild solution (14.40)–(14.42) and verify that they are all regular at r = 2m. 8. Verify that the integral in (14.113) is finite for every r0 < .

9. Assume geodesic coordinates in (8.51), so that ds2 = dt2 − S 2 t r dr 2 − R2 t r d 2 + sin2   d2 (make sure first that the transformations (8.52) do really allow such a choice!). Then solve the vacuum Einstein equations G = 0 for this metric and verify that (14.116)–(14.117) is the general solution that results when R r = 0. 10. Prove by direct coordinate transformation that (14.116)–(14.117) is indeed a representation of the Schwarzschild solution (14.40) and (14.42). Hint. Take the Schwarzschild solution (14.40) and (14.42) and transform the coordinates by t = f  u r = R  u , where f and R are functions as yet unknown. Then demand that in the new coordinates g = 1 and gu = 0. Solve the resulting equations algebraically for the derivatives of f . Impose the integrability condition f u = f u . (The  and u are the t r coordinates of Eqs. (14.116)–(14.117).) 11. Verify that (14.122) is fulfilled by virtue of (14.119)–(14.121). Hint. Differentiate (14.121) by r, then manipulate (14.119)–(14.122) and (14.127) until you reproduce (14.122).

14.17 Exercises

221

12. Verify that the Weyl tensor of (14.134) is zero. 13. The lines r = constant in the subspace  = constant  = constant of the R–N metric are the hyperbolae u2 − v2 = constant, as seen from (14.149). Follow the chain of transformations (14.154)–(14.156) to show that in the U V coordinates these lines are still hyperbolae given by      1−C 2 1+C 2 2 2 def 2 − V = 1

U+ C = e2pq = e2 u −v  1+C 1−C 14. Show that the proper time s needed to reach the horizon r = m of the extreme R–N metric from any point along a radial timelike geodesic is finite. Show that, for a radial null geodesic starting at a finite r, the value of the affine parameter s at r = m is also finite. Hint. The curve defined by (14.176) becomes geodesic when q = 0. 15. Prove that the inner turning point of a radial trajectory of a charged or uncharged particle is always within the inner horizon if q 2 /2 < 1. Hint. The right-hand side of (14.176) with J0 = 0 (call it W r ) vanishes at r = r1 and r = r2 > r1 . The inner turning point is at r1 when r1 > 0 and at r2 when r1 < 0. One of the two values must be positive because otherwise there would be no turning point at r > 0 and the singularity at r = 0 would be accessible to particles. Assume that the value of r at the turning point in question is greater than r+ and verify that it leads to a contradiction in both possible cases, # 2 > 1 and # 2 < 1.

15 Relativistic hydrodynamics and thermodynamics

15.1 Motion of a continuous medium in Newtonian mechanics Let xi  i = 1 2 3, be the rectangular Cartesian coordinates in the Euclidean 3-space. We assume that one line of flow of a fluid passes through every point of a certain region in space. Let the velocity field of the fluid, vi t xj , be differentiable at every point xi and at every instant t. Then  dxj t = vj t yi x =y  (15.1) j j dt The xj t on the left are coordinates of the flowing fluid particle, while the yi on the right are the coordinates of a point of space. Let us follow the motion of the particle P, which at the instant t occupies the position xi  and moves with the velocity vj t xi , and the motion of an adjacent particle Q that, at the same instant t, occupies the position xi + xi  and moves with the velocity vj t xi + xi . Up to terms linear in xi , the velocity of the particle Q with respect to P is   vQP j t ≡ vj t xi + xi  − vj t xi  = vjk t xi xk + O x2 (15.2) (sums  over all repeated indices are implied in all the equations in this section), where O x2 denotes terms of order 2 and higher in xk . Hence, at the instant t + t the position of the particle Q relative to P will be given by the vector       xj = xj + vQP j t + O t2 = xj + vjk xk t + O t2  x2  (15.3) Thus the matrix vjk determines the relative velocity of two neighbouring particles of the fluid. If we use only Cartesian coordinates, then, under transformations between such coordinates, the matrix vjk transforms as a tensor. It can be decomposed into three parts, each of which transforms independently of the others: 1 vjk = jk + jk + jk  3

(15.4)

where = vjj  1

jk = vjk − jk  3 222

(15.5) (15.6)

15.1 Motion of a continuous medium in Newtonian mechanics

jk = v jk 

223

(15.7)

This decomposition can be done for every tensor of rank 2. However, for the tensor vjk , each part has a physical interpretation. The easiest way to read it out is to consider three types of motion, such that in each of them just one of the three parts is nonzero. • I. Let jk = jk = 0 = . Then, from (15.2) and (15.3):     1  xj = 1 + t xj + O t2  x2  3

(15.8)

The new vector that connects P and Q at the instant (t + t) has in this case the same direction as the old vector from P to Q, but a different length, and = 3d/dt ln x The particles P and Q either recede from each other (when > 0) or approach each other (when < 0) along the straight line PQ. Such motion is called isotropic expansion, and the quantity is called the scalar of expansion. • II. Let = 0 and jk = 0 = jk . Then, from (15.3) and (15.4):   xi = ik + ik t xk + O t2  x2  (15.9) Let us calculate the length of the vector xi . In consequence of antisymmetry of ik , we obtain   1/2 1/2  = xi xi  = xk xk + O t2  x3     = xk xk 1/2 + O t2  x3 =  + O t2  x3  (15.10) Hence, the derivative along vi of the length  is zero. Let us see what happens with the direction of xi :     xi − xi  xi = ik xi xk t + O t2  x3 = O t2  x3  (15.11) Hence, the rate of change of xi projected orthogonally on xi is zero. The properties (15.10) and (15.11) are characteristic for rotational motion. Thus, in this type of motion, Q revolves around P. Let us calculate the vector of angular velocity of this motion, . We have, from the definition of angular velocity:   (15.12) vQP =  × x =⇒ vQP i = ikl k xl    At the same time, from (15.2) in the present case we have vQP i = il xl S. These two equations must hold for every xl , hence il = −ilk k 

(15.13)

Inverting this equation and using (15.7) we obtain 1 1 1 j = jil li = jil vli =⇒  = rot v 2 2 2

(15.14)

224

Relativistic hydrodynamics and thermodynamics

In consequence of (15.13) and (15.14), ik is called the rotation tensor. Note that def

the quantity 2 = i i = kl kl /2 is always non-negative and vanishes only when kl = 0. Hence, also the scalar of rotation  can be used to differentiate between rotational and irrotational motion. • III. Let = 0 and ij = 0 = ij . Consider three particles Q1  Q2 and Q3 neighbouring P and occupying, at the instant t, the positions relative to P given by the vectors x y and z attached to P. The volume of the parallelepiped spanned on the vectors x y and z at the instant t is equal to V = x· y × z = ijk xi yj zk  At the instant t + t, the corresponding volume will be equal to   V  = V + D t + O t2  x4  where

 def  D = lmk kn + ljn jm + imn il xl ym zn 

(15.15)

(15.16)

(15.17)

 Using  2 ij 4= ji and ii = 0 one can now verify that D = 0, i.e. that V = V + O t  x . Hence, in this type of motion, the rate of change of volume of the parallelepiped spanned on the vectors x y and z is zero. However, the shape of the parallelepiped is changing because the vector ik xk has in general a different direction and different length from xi .1 This kind of motion is called shearing motion, and the tensor ij is called the shear tensor. Similarly to rotation, the shear tensor vanishes if and only if the scalar

defined by 2 = ij ij /2, called simply shear, is zero.

15.2 Motion of a continuous medium in relativistic mechanics In relativity, the motion of a fluid is described in a similar way to that in Newtonian mechanics. We assume that one line of flow of a fluid passes through every point x  of a certain region in spacetime, and that the velocity field of the fluid, u x, tangent to the flow lines, is differentiable in this whole region. Then dx /ds = u x , and, just as in (15.1), the x s on the left-hand side are coordinates of the flowing fluid element, while the x on the righthand side are the coordinates of that point of spacetime in which the x s equals x . The parameter s is the proper time on the worldlines of the fluid, hence u xu x = 1

(15.18)

Note now that the tensor def

h  =  − u u 1

(15.19)

If x y and z are collinear with the eigenvectors of the matrix , then their directions do not change during the motion, but, in consequence of ii ≡ Tr  = 0, the sum of changes of their lengths must be zero. Hence, as long as = 0, if two of the vectors become longer, the third one must become shorter. Consequently, the shape of the parallelepiped will be changed also in this case.

15.2 Motion of a continuous medium in relativistic mechanics

225

projects vectors on the hypersurface orthogonal to u at a given  point  x. This is because we have h  u = 0 and, for any arbitrary vector B  u · h  B = 0. The quantity def

B⊥ = h  B is the component of the vector B along the direction perpendicular to u . Note also that g B⊥ B⊥ = h B⊥ B⊥

(15.20)



for any arbitrary vector B . Thus, the tensor h plays the role of the metric tensor on the hypersurfaces orthogonal to u .1 Let us choose the proper time s on the flow lines as the time coordinate x0 in spacetime. Then u = 0  

∗

(15.21)

Let us next choose three spatial coordinates xI  I = 1 2 3, so that their parametric lines are contained in the hypersurfaces SP s orthogonal to one fixed worldline P. In such coordinates g0I P = 0, so, for an arbitrary vector field B orthogonal to uP s, we have 0 = ∗   g u B P = g00 P BP0 , i.e. BP0 = 0 (since g00 = 0 in consequence of (15.21) and (15.18)). ∗

∗

Consider the curves tangent to the vector field B , given by B = dx /d. In our chosen coordinate system we have 0 = BP0 = dx0 /dP , i.e. at points of the curve P these lines ∗

are tangent to the hypersurface x0 = constant. Hence, the hypersurfaces x0 = constant and the hypersurfaces orthogonal to P are tangent to each other along P. Consequently, the hypersurface SP s0  is called the hypersurface of events simultaneous with Ps0  or the hypersurface of constant time s = s0 for the observer P. Let the particle moving along the curve P occupy at the instant s the point P0 in spacetime. Let Q be an adjacent worldline, and let x be a vector joining P0 to an arbitrary point on Q. The event Q0 simultaneous with P0 is then at the position relative to P0 given by the vector ⊥ x = h  P0 x . The velocity of the fluid at P0 is u x , and the velocity at Q0 is u x + ⊥ x . After the time s, the particle that at s occupied the point P0 will be at P1 of coordinates x  = x + u s. Where will then be the particle that occupied the point Q0 at s? Its position relative to P1 will be determined by the vector ⊥ x + v s, attached to P1 , where v is determined by u x + ⊥ x . However, the vector v cannot be equal to u x + ⊥ x , because the latter is attached to the point of coordinates x + ⊥ x , while ⊥ x is attached to P0 of coordinates x . In order to add the vectors, we must first transport one of them parallely to the point of attachment of the other. Thus v must be the vector u x + ⊥ x  parallely transported from x + ⊥ x  to x . Let us apply Eq. (5.6) to our present case. The v  2  of (5.6) is our u x + ⊥ x , and the v 1  of (5.6) is our v . Hence we have x +⊥ x u x + ⊥ x  = v −    xu xdx  x

1

Each of the hypersurfaces meant here is orthogonal to a single flow line of the fluid. The family of hypersurfaces is in general different for every flow line. For vector fields, the property of being orthogonal to a family of hypersurfaces is rather special, and does not hold in general. As an exercise, readers may wish to verify that such a family of hypersurfaces exists if and only if the rotation tensor, defined later in this section, is zero.

226

Relativistic hydrodynamics and thermodynamics

We now apply the mean value theorem to the integral, and also develop the vector on the left-hand side by the Taylor formula up to terms linear in ⊥ x . The result is   u x  + u  x ⊥ x + O ⊥ x2 = v −    xu x⊥ x  The point of coordinates x is the intermediate point between x and x + ⊥ x . When we replace it by x , the difference will be of the order of ⊥ x , and, since the whole  expression is multiplied by ⊥ x , the difference in the equation will be of order O ⊥ x2 . Transferring the expression containing the connection coefficients to the left-hand side of the equation we then obtain   v = u x  + u  x ⊥ x +    xu x⊥ x + O ⊥ x2  This is equivalent to   v = u x  + u  x ⊥ x + O ⊥ x2 

(15.22)

Hence, the particle that occupied the point Q0 at the instant s will at the later instant s + s occupy the point of coordinates    x = x + ⊥ x + u x  s + u  x ⊥ x s + O ⊥ x2  s2  (15.23) Hence, the new position of the particle Q relative to the particle P will be given by the vector   ⊥ x = x − x = ⊥ x + u  ⊥ x s + O ⊥ x2  s2  (15.24) Thus, the matrix u  determines the rate of change of the position of the particle Q with respect to the particle P. However, not the whole matrix u  gives a nontrivial contribution to (15.24). We have   u  ≡ u    ≡ u  h  + u u  (15.25) Only the first term in (15.25) gives a nonzero contribution in (15.24). Hence, finally    ⊥ x = ⊥ x + u  h  ⊥x s + O ⊥ x2  s2  (15.26) The following identities hold: u  ≡ h  u  

u  u ≡ 0

(15.27)

They show that the matrix u  h  is an operator acting in the 3-dimensional hypersurface orthogonal to u . Comparing (15.27) with (15.3) we see that the quantity u  h  plays in relativistic hydrodynamics the same role as the quantity vjk played in Newtonian hydrodynamics. This time, u  h  is a genuine tensor, and we can decompose it into the three independent parts in the same way: 1 u h  =  +  + h  3

(15.28)

15.2 Motion of a continuous medium in relativistic mechanics

227

where = u   h  ≡ u   

(15.29)

 = u   h  ≡ u  − u˙  u 

(15.30)

u˙  = u u 

(15.31)

1 1

 = u  h  − h ≡ u − u˙  u − h  3 3

(15.32)

These quantities are called, respectively, the scalar of expansion, the rotation tensor, the acceleration vector and the shear tensor. The vector u˙  is called acceleration because u˙  = 0 is the necessary and sufficient condition for the field u to be tangent to geodesic lines, i.e. for the fluid to move under the influence of gravitation only, which means free motion in the language of relativity. The tensor of rotation can be uniquely represented by the vector field 1 def w = √  u   2 −g

(15.33)

and the rotational motion may be characterised by the scalar : 1 def 2 = − w w =   ≥ 0 2

(15.34)

called the rotation scalar. Similarly, the shearing motion may be characterised by the shear scalar defined by def 1

2 =   ≥ 0 2

(15.35)

The relativistic definitions of the expansion, rotation, shear and acceleration were introduced by Ehlers (1961). It can easily be verified that the quantities given by (15.29), (15.30) and (15.32) are, in a suitably chosen coordinate system, proportional to their Newtonian counterparts given by (15.5)–(15.7). Namely, at a fixed point p0 of the spacetime we can choose a

  coordinate system in which p0  = 0 ie D/x p0 = /x  Then, after carrying  out all the operations given by (15.29)–(15.32), we substitute v/c = 0. Marking the relativistic quantities with the subscript R and their Newtonian counterparts with the subscript N, we obtain c R = N 

cij = ij  R

N

0i −→ 0 R v/c→0

c ij = ij  R

N

0i −→ 0 R v/c→0

(15.36)

228

Relativistic hydrodynamics and thermodynamics

15.3 The equations of evolution of     and u˙  ; the Raychaudhuri equation The equations derived in this section will be simply consistency conditions imposed by the Einstein equations on the hydrodynamical scalars, vectors and tensors introduced in the previous section and on the curvature of spacetime. Although they may thus seem to be of secondary meaning, they are surprisingly powerful in their applications. In particular, they show that one cannot make any arbitrary assumptions about the properties of the kinematical tensors – these properties are interrelated and some of them have important consequences.1 From Eq. (6.3), applied to the velocity field of a fluid, we have u − u  = −R u 

(15.37)

Let us contract both sides of this equation with u h  h  . In the second term on the left we then transfer the derivative with the index  from u to u , while on the right we will use the antisymmetries of the Riemann tensor to eliminate some terms. The result is   (15.38) h  h  u ˙− h  h  u˙  + h  h  u  u = −R u u  where the overdot denotes the directional covariant derivative along the velocity field, def ˙ = u  . Now we contract (15.38) with g  and obtain   (15.39) h u ˙− h u˙  + h u  u + R u u = 0 Up to this point, these were general equations of differential geometry. Now we use the Einstein equations with a perfect fluid source to replace 1 1 R = T − g T =   + pu u + p − g  2 2

(15.40)

and then we apply (15.28) to the term h u  . In the two remaining terms of (15.39) we substitute (15.19) and we transfer the differentiation from the derivatives of u to u . The result is u  ˙ − u u u + u˙  u u −u˙   +u u˙   u 1 1 − u  u u˙  + u   +   + h   +  + 3p = 0 3 2

(15.41)

Now we use (15.31) and (15.27); the latter implies u˙  u = 0. We also use the definitions of   and  and the equations

 u =  u = 0 1

(15.42)

In the paper in which these equations were first derived (Ellis, 1971), and in probably all papers in which they were applied, the signature − + ++ was used, as opposed to + − −− used here. This is why the equations of this section will differ from those in other sources – but they are equivalent.

15.3 Evolution equation, the Raychaudhuri equation

229

that follow from (15.30), (15.32) and (15.27). We obtain then in (15.41): 1 1 0 = ˙ + 2 − u˙   +  

 + u˙  u + h   3 3 1 +  + u˙  u   +  + 3p 2   1 1 = ˙ + 2 − u˙   + 2 2 − 2 +  + 3p 3 2

(15.43)

This equation, in the form quoted above, was derived by Ehlers (1961) and is called the Raychaudhuri equation (the name seems to have been introduced by Ellis (1971)). The idea, and a subcase of (15.43), corresponding to dust p = 0, without the definitions of the shear and rotation, were first introduced by Raychaudhuri (1955). Taking the antisymmetric part of Eq. (15.38), then its symmetric part and using in the ˙ we obtain two other equations: second one the Raychaudhuri equation to eliminate , • the vorticity propagation equation 2 h  h   ˙  − h  h  u˙  + 2     +  = 0 3

(15.44)

• and the shear propagation equation h  h  ˙  − h  h  u˙  + u˙  u˙  +    +    +

    2 1  + h 2 2 − 2 + u˙   + E = 0 3 3

(15.45)

where the quantity E is the ‘electric part’ of the Weyl tensor, which was defined in (7.97). In addition, the following three other equations hold:   + u˙  u + u˙   = 0 2 h    −   +   −   +   u˙  = 0 3    √   2u˙  w − −gh  h   +    u = H 

(15.46) (15.47) (15.48)

where H is the ‘magnetic part’ of the Weyl tensor, defined in (7.98). Equation (15.46) is obtained by antisymmetrising (15.37) in the indices   and and using −R   u = u R   = 0. Equation (15.47) is obtained by contracting (15.37) with g  h and using (15.40). In order to obtain (15.48), one has to rewrite (15.37) in the form −u  + u  = R  u  1√

(15.49)

then act on both sides of (15.49) with the operator 2 −g u h  h  and then symmetrise the result with respect to  and . Equations (15.43)–(15.48) are algebraically independent components of Eq. (15.37).

230

Relativistic hydrodynamics and thermodynamics

A consequence of Eqs. (15.43)–(15.48) is that assumptions made about the kinematical quantities can lead to restrictive results. For example, assume that u˙  = =  = 0. Then (15.44) and (15.46) are fulfilled identically, (15.47) says that the expansion scalar may change only along the flow lines, while (15.45) and (15.48) imply that the Weyl tensor is zero. The family of perfect fluid solutions of the Einstein equations for which the Weyl tensor vanishes was found by Stephani (1967a) (see also Stephani et al. (2003)). They have the properties =  = 0, but in general u˙  = 0. In the limit u˙  = 0 they reduce to the Robertson–Walker metrics of Section 10.7 – which is a rather strong simplification. The full set of solutions of Einstein’s equations with a perfect fluid source for which

=  = 0 was found by Barnes (1973).

15.4 Singularities and singularity theorems An important conclusion follows from the Raychaudhuri equation. Let us define the function  x  through the equation 1 d 1 =   ds 3

(15.50)

def

where d/ds = u  / x . This function is a generalisation of the scale factor Rt of the Robertson–Walker models; see Section 10.7. It can be seen from (15.24), (15.19), (15.28) and (15.31) that, with  = = 0 = u˙  , the distance between the simultaneous positions of two particles obeys (15.50). In the general case x has no direct physical interpretation and is just a convenient representation of the expansion scalar. We will assume that  = 0 = u˙  ; then the Raychaudhuri equation becomes ¨ 1 3 + 2 2 +  + 3p = 0  2

(15.51)

Since  + 3p > 0 for all kinds of matter known from laboratory, (15.51) shows that d2 /ds2 < 0. This means that the function s is concave in all its range – if at any point p of the curve s we draw a straight line tangent to s, then the whole curve s will lie below that straight line. There are two possibilities. If at present s = s0 d/dss0  > 0 (i.e. the fluid expands, curve I in Fig. 15.1), then at a certain instant sP in the past, s1 < sP < s0   was zero. If, however, d/dss0  < 0 at present (i.e. the fluid contracts, curve II in Fig. 15.1), then at a certain instant sF in the future, s2 > sF > s0   will be zero. Consequently, in every matter model in which u˙  = 0 =  there exists such an instant, in the past or in the future, at which  → 0, which implies, via (15.51), that  + 3p → or

→ . Hence, every such portion of matter must have a singularity either in its future or in its past. Note that we have proven here the existence of the singularity using the Einstein equations (15.40), without invoking any specific solution. With the help of a similar analysis, based on various less restrictive assumptions, Penrose, Hawking and Ellis proved several singularity theorems that imply that also

15.5 Relativistic thermodynamics

231

(s) I

s1

sP

I I

s0

s0

sF

s2

Fig. 15.1. A function that is everywhere concave must go to zero either in the past (at sP > s1 ) or in the future (at sF < s2 ).

quite general fluid configurations must contain singularities. A summary and overview of these theorems is presented in the book by Hawking and Ellis (1973) that caused a certain revision in the understanding of the relativity theory. The theorems were said to show that general relativity cannot be the ultimate theory of space and time. In order to avoid the singularities, one would have to resort to a more general theory that would be capable of describing the quantum effects taking place at great densities of matter. However, the singularity theorems are not as general as it was initially claimed. Several interesting solutions of the Einstein equations that do not contain any singularities have been found by Senovilla and coworkers (for an extended review see Senovilla (1998)). They have not, so far, been shown to describe any actual astrophysical situation, but their very existence proves that singularities are an inevitable part not of relativity as such, but of the collection of models of matter defined by the assumptions of the singularity theorems.

15.5 Relativistic thermodynamics The considerations of this section are applied in relativistic astrophysics to interiors of stars or to the Universe as a whole (see Section 16.1). For simplicity, we shall assume that the medium is a one-component perfect fluid. More general media, like viscous, heatconducting or anisotropic fluids are considered in the literature, but they require more advanced thermodynamics for their description. The equations of motion of a perfect fluid are (12.17), with T  given by (12.73). Let n denote the particle number density. We shall consider only such processes in which particles are neither created nor annihilated, so the total number of particles contained in a volume at time t2 will be either the same as at any t1 < t2 , or equal to the sum of the number of particles at t1 and the number of those that entered/left the volume between t1 and t2 . In addition to the equations of motion (12.17) we thus postulate the equation of continuity for n: nu   = 0

(15.52)

232

Relativistic hydrodynamics and thermodynamics

In phenomenological thermodynamics, if the volume V of a given system is determined, the enthalpy of the system is defined by H = U + pV , where U is the internal energy of the medium. In cosmology or in considering the interior of stars, the only well-defined volume for local considerations is the proper volume, i.e. the volume per particle of the fluid Vp = 1/n, and  + p is the enthalpy density. We can thus define the proper enthalpy, i.e. the enthalpy per particle,  =  + p/n

(15.53)

Now we postulate that, for a single ‘particle’ of the fluid, the non-relativistic phenomenological thermodynamics still holds (in the next chapter we will see that in cosmology that ‘particle’ will be a galaxy cluster or a still larger object). The classical enthalpy obeys the Gibbs identity: dH = V dp + T dS

(15.54)

Since  and p are provided by the Einstein equations, and n and V = 1/n have a clear physical interpretation, one may treat H and  as given. Classical thermodynamics says that at most two state functions are sufficient for a full thermodynamical description of a one-component substance; the other functions can be calculated from the equation of state. Hence, in keeping with classical thermodynamics, one would say that at most two of the three functions p V and  are independent. In that case, the differential 1-form d − V dp is a form in only two variables, and thus must have an integrating factor. Denoting this factor 1/T , we conclude that the form 1/Td − V dp is a perfect differential of a function S, so d = dp/n + T dS

(15.55)

In this way, we have apparently defined the temperature T and the entropy S. The integrating factor 1/T and the function S are not determined uniquely, but, still following the rules of classical phenomenological thermodynamics, one may conclude that T is determined up to linear transformations, i.e. up to the choice of scale (Werle, 1957). Given T S is determined up to an additive constant. However, there is a problem with this reasoning. It remained unnoticed for a long time because the solutions of Einstein’s equations used in astrophysics are almost exclusively of high symmetry: they are spherically symmetric, or stationary and axisymmetric, or homogeneous of Bianchi type (Robertson–Walker spacetimes being just a subcase of the latter). In the first two cases all the metric components, and thus all the thermodynamical quantities, depend only on two variables, so (15.55) may indeed be considered a definition of T and S. In the third case, all thermodynamical quantities depend on just one variable (the comoving time), so an even simpler equation of state of the type  = p is imposed on the matter by the assumed symmetry. However, if the metric has a 1dimensional symmetry group, or no symmetry at all, then the functions  p and n depend on three or four variables, respectively, and then the existence of an integrating factor for the differential form d − V dp is an additional postulate, not a certainty.

15.5 Relativistic thermodynamics

233

Spacetimes in which the form d − V dp does have an integrating factor, for which thus temperature and entropy can be defined by the reasoning presented above, are said to admit a thermodynamical scheme. The fact that the thermodynamical scheme might not exist in some spacetimes was first noted by Bona and Coll (1985, 1988) and Coll and Ferrando (1989). They also showed that the Stephani Universe (Stephani, 1967a), which has in general no symmetry, acquires a 3-dimensional symmetry group acting on 2-dimensional orbits when the thermodynamical scheme is imposed (Bona and Coll, 1988). The problem of existence of the thermodynamical scheme was further discussed by Quevedo and Sussman (1995) and applied to all currently known cosmological solutions with no symmetry by Krasi´nski, Quevedo and Sussman (1997). Apart from the Stephani Universe, the problem of existence of the thermodynamical scheme shows up only in the two classes of metrics found by Szafron (1977) (see our Section 19.5) – all other solutions known at present are vacuum, have dust source or have a high symmetry. It turns out that in the  = 0 family of the Szafron metrics the thermodynamical scheme imposes a 3-dimensional symmetry group. For the  = 0 family of Szafron metrics, a metric with no symmetry survives the imposition of the scheme, but it is a limited subcase of the general class. The conclusion from the results briefly reported above is that, in considering spacetimes of no symmetry, one must allow for a more complicated thermodynamical scheme than a single-component perfect fluid. Having said this, we will now discuss the thermodynamics of single-component perfect fluids in some more detail. Using (15.52)–(15.54) one can now write (12.17) as   (15.56) 0 = nu  u   −p = n u  u   −  +TS  By virtue of u u = 1 and u u = 0 this becomes         0 = u  u   −  u  + TS = u  u  −  u  + TS 

(15.57)

From here we see easily that S u = 0, i.e. that the entropy is constant along the flow lines. This is a general conclusion that follows from the definition of a one-component perfect fluid. A more special kind of motion is often considered, in which 

S = 0

(15.58)

i.e. the entropy is constant in the whole volume under consideration. Such motion is called isentropic. Then, from (15.53) and (15.55):   +p d + dp  + pdn dp =d = −  (15.59) n n n n2 Hence d =  + pdn/n, which means that  = n, and consequently p = pn and  = p. This type of equation of state is called barotropic. It is almost exclusively used in cosmology (where it is necessitated by the high symmetry of the Robertson–Walker models). However, it is an additional simplifying assumption when used in less symmetric models.

234

Relativistic hydrodynamics and thermodynamics

  A reverse theorem also holds: for a perfect fluid, if  = p and nu  = 0, then either p u = 0 or S = 0. Proof. For a one-component perfect fluid, we have an equation of state F p n = 0. If  = p, then the equation of state implies immediately that n = np, so  = n. Then, u T   = 0, together with (15.55), implies that  u +  + pu  = 0

(15.60)

and the Gibbs identity (15.54) becomes d  + pdn = T dS − n n2

(15.61)

which can be written as  − + pn /n = nTS  (15.62)   Substituting u  = −n u /n (from nu  = 0) in (15.60) we obtain 

d/dn −  + p/n n u = 0. Hence, either n u = 0 (the particle number density does not change along the flow lines), or d/dn =  + p/n, so  =  + pn /n. Substitution of the last equation in (15.62) gives S = 0 .

15.6 Exercises 1. Show that the quantity D defined in (15.17) is indeed zero. Hint. Decompose the vectors x y and z in the basis of the eigenvectors of the matrix . Note that Tr  = 0. 2. Verify Eqs. (15.36).

16 Relativistic cosmology I: general geometry

16.1 A continuous medium as a model of the Universe When describing the Universe as a whole, one assumes that it is filled with a continuous medium (fluid or gas), whose state can be described by physical fields (scalar fields such as mass density and pressure, vector fields such as the velocity of flow, or tensor fields, e.g. an electromagnetic field). This is a rather crude approximation, since our real Universe has a ‘granular’ structure. Its basic units are stars, and the relevant information from the point of view of observational cosmology is, for example, the number of stars in a given volume rather than the average mass density in that volume. The less-than-perfect adequacy of the fluid approximation is also demonstrated by the fact that the view on which objects should be considered the ‘elementary cells’ of the cosmic fluid has been changing with time. In the times of Hubble (1920s and 1930s), these were the galaxies. In later times, when galaxy clusters and proper motions of galaxies in clusters were observed, the galaxy clusters took over. In still later years, it was found that galaxies and galaxy clusters tend to occupy edges of large volumes of space that are almost empty inside (called voids). According to current beliefs, the elementary units of the Universe should be groups of voids. These changes in the definition of the elementary unit of the Universe were, characteristically, adopted in order to save the assumption of homogeneity and isotropy of the Universe ‘in the large’. This assumption deserves a separate comment. The astronomical observations provide reliable quantitative information about a relatively small neighbourhood of the Solar System. With increasing distance from the Earth, the precision of this information is quickly degraded. If we want to describe the Universe as a whole, we have to extrapolate the results of local observations to large volumes, and then test the conclusions from the extrapolation. The extrapolations, however, always contain a large amount of arbitrariness. Hence, if observations tell us that a given extrapolation leads to a correct prediction, this does not mean that the extrapolation was the only one possible. The most fundamental extrapolation is contained in the so-called cosmological principle. It stems from the ideas of Copernicus, and so is sometimes called the Copernican principle. Copernicus was the first astronomer who noted that the Earth is not at the

235

236

Relativistic cosmology I: general geometry

centre of the Universe, but occupies a relatively unimportant position in the Solar System. Afterwards, the Earth has been ‘degraded’ a few more times when it was established that even the Sun is not at the centre of the Universe, but is one of a great number of stars that are similar to each other, and that our Galaxy is also one of many, not the greatest one and not placed at any important position. The cosmological principle is a summary of this line of thinking. In its weaker form, it says: we (the inhabitants of the Earth) occupy a position in the Universe that is not in any way preferred. Quite often, however, the cosmological principle is expressed in the extreme form: all positions in the Universe are exactly equivalent; the geometrical and physical properties of the Universe do not depend on the point from which the Universe is observed. No matter whether one believes in the cosmological principle, and in which version of it, it must be remembered that this principle is not a summary of observational results, but an assumption, upon which the theory of the structure of the Universe is built. This assumption was a good working hypothesis when theoreticians constructed the first-ever models of the Universe in the 1920s (Friedmann, 1922; Lemaître, 1927) because at that time there were no observational data to contradict it. Today, the cosmological principle still has no direct observational verification,1 while models not obeying this principle and generalising the Friedmann–Lemaître models are known; see Chapter 18. The fact that virtually the whole of observational cosmology is based on the Friedmann–Lemaître models is a consequence of inertia in thinking and of emotional attachment to the, mathematically elegant and appealing, doctrine of exact equivalence of all positions in the Universe. However, natural sciences, physics and astronomy among them, are said to use the criterion of consistency of theory with observations/experiments. At the very least, in order to verify the cosmological principle, alternatives to it have to be considered and compared with observations. Working always from within the same theory, we make it more difficult to verify its basic assumptions. The cosmological principle is translated into assumptions about the geometry of spacetime in the following way. The observations show that the space is approximately isotropic around us.2 According to the cosmological principle, the space should thus be isotropic around every other point. A space that is isotropic around every point is homogeneous. This argument points to the Robertson–Walker (R–W) spacetimes of Section 10.7. Before we come to the R–W models, however, we shall discuss the fluid model of the Universe in the background of a general geometry. We assume that each point in the Universe can be assigned energy density, pressure and the 4-vector of velocity of the fluid particle that passes through the point. We also assume that the matter of the Universe treated in this way obeys the equations of hydrodynamics known from laboratory – which is another bold assumption.

1 2

Because of difficulties in determining the distances to other galaxies. The isotropy of the cosmic microwave background (CMB) radiation imposes only weak limitations on the anisotropy of matter distribution; see Chapter 18. At present, the main argument supporting this statement is the isotropy of the microwave background radiation, but the statement had been made long before the CMB radiation was discovered.

16.2 Optical observations in the Universe – part I

237

16.2 Optical observations in the Universe – part I 16.2.1 The geometric optics approximation The approach presented below is based on the papers by Ellis (1971, 1973) and Kristian and Sachs (1966). We will apply the geometric optics approximation to the Maxwell equations. We assume that the electromagnetic field propagates into vacuum, with no charges or currents, and that it is weak enough not to influence the geometry of the spacetime (i.e. it is a test field in a given geometry). Then, the Maxwell equations are (13.4) and (13.6) with j  = 0. We will seek solutions of this set in the form of waves: F = G sinS + 0 

(16.1)

where the amplitude G is assumed to vary slowly compared to the phase S; 0 is a constant. Thus, we assume that each differentiation of G introduces a factor , where is a small parameter. If G can be developed in a power series with respect to , then we can write   0 i G = B + i B

(16.2) i=1

We now assume that the Maxwell equations are fulfilled at each order in , and substitute (16.2) in them. Denoting1 S = k 

(16.3)

we obtain at the zeroth order: B0  k = 0

0 k B =0

(16.4)

and at the first order B0   sinS +  = − B1  k cosS +  0 B sinS + 

=

1 − B k cosS + 

(16.5) (16.6)

(Since the Bi   i = 0 1 , are antisymmetric  in  , the covariant derivative in √ √ (16.5) can be written as 1/ −g −gB0   , so this expression is small by virtue of our assumptions. The same applies to (16.6) – in this combination, the Christoffel symbols cancel out and the covariant derivative reduces to a partial derivative.) The last two equations show that the first-order terms act as sources in the Maxwell equations for the zeroth order terms. Thus, comparing this scheme with the Maxwell equations in empty space, we see that the electromagnetic wave does not in fact propagate into vacuum – the higher order terms act as a medium with currents and charges, on which the zeroth order wave may be dispersed. Similarly, the first order terms will be influenced by second order terms, and so on. This is the influence of curvature on the propagation 1

With Eq. (16.3) fulfilled, the rotation of the vector field k , defined later in this section, is zero. Thus, the geometric optics approach turns out to be more general in this respect: the wave description does not allow rotating congruences of rays.

238

Relativistic cosmology I: general geometry

0 of the electromagnetic wave. (In a flat space in Cartesian coordinates, a constant B , i with all B ≡ 0 for i ≥ 1 is a solution of (16.5)–(16.6).) Assuming that the scheme is self-consistent (no formal proof of this assumption seems to be available) and that the ‘tail’ terms remain small, we will now consider the consequences of (16.4). The second equation of (16.4) can be written as 0 0 0 k B + k B  + k B = 0

(16.7)

Contracting this with k and making use of (16.4) we immediately obtain k k = 0

(16.8)

i.e. the wave vector of the ray is a null vector. From this it follows that k k = 0

(16.9)

But, since k = S , we have k = k , and then from (16.9) k k = 0

(16.10)



which means that k is geodesic, and its parametrisation is affine. Further, contracting (16.7) with B0  and using (16.4) we obtain 0 B0  = 0

B

(16.11)

Contracting (16.7) with B0  and using (16.4) once more, we obtain 0 0 B0  − k B B0  = 0

k B

(16.12)

This equation has the form k V − k V = 0 (except that V carries also an upper index  in both places). Such an equation means that the vectors V and k are proportional (collinear), thus 0 B B0  = U  k 

(16.13)



where U is the (vectorial) proportionality factor. With the index  lowered, the left-hand side of (16.13) is symmetric in , so U k − U k = 0, and by the same argument U = k . Thus, finally

0 B B0  = k k

(16.14)

From (16.11) and (16.14) we see that the electromagnetic energy-momentum tensor (13.10) of the field (16.1)–(16.2) is  1  T = (16.15) k k + O   4 which is, up to terms linear in , a perfect-fluid-type medium with the ‘4-velocity’ k . With k being null, the velocity of flow equals the velocity of light, which means that (16.15) corresponds to a stream of photons. From T   = 0, and making use of (16.10), we obtain k   = 0 which means that the stream of photons is conserved.

(16.16)

16.2 Optical observations in the Universe – part I

239

16.2.2 The redshift An observer moving with the 4-velocity u will measure the rate of change of phase of the light wave vp = S u = k u . Within a short time-interval s, the phase will thus change by S = k u s. For another observer, moving with the velocity u1 and measuring the change of phase at another spacetime point, where k = k1 , the same change of phase S will in general take a different time-interval, s1 : S = k1 u1 s1 . Hence: s1 k u  =   2

k u 1 s2

(16.17)

If the electromagnetic wave is periodic, then the change of phase is connected with the frequency  by S = 2 s (this formula applies for an arbitrary time-interval s). Hence, for the same change of phase measured by two different observers we have 1 s1 = 2 s2 , so 2 s k u  = 1 =   2

k u 1 1 s2

(16.18)

This is the formula for the cosmological redshift, derived without invoking any definite cosmological model. It can be written in a more familiar form. Let the subscripts e and o denote quantities calculated at the point of emission of the light ray and at the point of detection, respectively. Then, from the definition of the redshift: z=

 o − e = o − 1

e e

(16.19)

But o /e = e /o (because the locally measured velocity of light c =  is constant), hence  k u  1+z = e =   e

(16.20) k u o o The light ray with the wave vector k is received by the observer from the direction determined by the unit spacelike vector n : n n = −1

(16.21)

which is collinear with the projection of k on the hypersurface of constant time. Hence, if the 4-velocity of the observer is u , then   (16.22) n =    − u u k

 −2 Substituting (16.22) in (16.21) we obtain 2 = k u ; hence n = −

1  k + u k u 

=⇒ n u = 0

(16.23)

 −1 because n denotes the direction towards the source of We have chosen  = − k u light, opposite to the direction of the wave vector.

240

Relativistic cosmology I: general geometry

The considerations up to this point applied up to an arbitrary distance; the only approximation involved was that connected with introducing the geometric optics. However, in order to apply (16.20) to results of observations, one has to integrate the equations of a null geodesic, which is almost always difficult. In that case, an approximate version of (16.20) may be used, which applies for sources of light with small redshifts, z  1. Then (16.19) becomes z = d/, and in (16.20) we have z=

k u e − k u o d k u  =

 k u o k u o

(16.24)

The change d· in (16.24) should be calculated along the light ray connecting the lightsource with the observer. Denoting the affine parameter on the ray by v, we have     d k u  = D k u  = k k u o dv + k u  k o dv

(16.25) The first term vanishes in consequence of (16.10), and in the second term we substitute the decomposition (15.28) and use the antisymmetry of  . The result is     1 d k u  =  k k o − k u o 2 + k u˙  o k u o dv

(16.26) 3 Using (16.23) and (15.42), we obtain



2  1 d k u  = k u o  n n −  − n u˙  dv

3 o

(16.27)

Equations (16.23) and (16.8) imply 



k  n = k  u  

(16.28)

and − k n o dv is the distance in the rest space of the observer travelled by the front of the light wave corresponding to the change dv in the affine parameter, i.e. it is the distance between the light-source and the observer, which we shall denote by . In consequence of this, and using (16.27) in (16.24), we obtain:

1 z = − n n +  + n u˙  

(16.29) 3 o This shows that for z  1 rotation has no influence on z. It is seen that  and u˙  introduce anisotropy in z, whereas with  = 0 = u˙  the redshift should be isotropic. Equation (16.29) is still correct in every cosmological model, but only for light-sources that are near to the observer. Its advantage is that all the quantities contained in it can always be calculated; one does not need to integrate any differential equations.

16.3 The optical tensors We shall now apply a reasoning similar to that in Section 15.2 to families of null curves. The tensor of projection onto a locally orthogonal space now has to be defined in a different way, because a hypersurface orthogonal to a null vector k contains k. Therefore,

16.3 The optical tensors

241

given k , we first define a second null vector  that is tangent to the same light cone and obeys:  k = 1

  = 0

(16.30)

Note that  is not defined uniquely. If m is an arbitrary spacelike vector of unit length (m m = −1) orthogonal both to k and to  , then   =  + 21 b2 k + bm obeys (16.30) as well, where b is an arbitrary parameter. We will come back to this in Section 16.5. Then we define the projection tensor on the surface (this time 2-dimensional) that is orthogonal to both  and k : p = g −  k − k  =⇒ p k = p  = 0

(16.31)

This surface does not include  or k – because a vector that is orthogonal to two linearly independent null vectors must be spacelike; it is an exercise in special relativity to prove it. Now assume that k is a null vector field. It is usually assumed at this point that the field k is geodesic and affinely parametrised so that k k = 0. We will not make this assumption; instead we define def k˙  = k  k 

(16.32)

which we shall call the acceleration of a light ray. The specialisation to the geodesic affinely parametrised case will then follow immediately by k˙  = 0. We will need the more general formulae in Section 16.5. Being null, the field k obeys k k = 0 = k k =⇒ k k˙  = 0

(16.33)

We define def

A = k p  p 

(16.34)

k = A + a k + k b + k˙   

(16.35)

Then the following holds:

where 1 def a =  k − k   k  2 1 def  b =  k − k   k − k˙   

2

(16.36)

It follows that a k = b k = 0. Now we apply to A the decomposition into the trace, the trace-free symmetric part and the antisymmetric part, just like we did in Section 15.2 with the covariant derivative of a unit timelike field: A =  +  + p 

(16.37)

242

Relativistic cosmology I: general geometry

(for some reason, tradition requires one to write the last term without the coefficient 1/2 that would be natural here), where def

 = A

(16.38)

is called the rotation of the family of null curves, def 1  = g  A 2 is called the expansion of the family, and def

 = A − p 

(16.39)

(16.40)

is called the shear of the family. The geometric interpretation of rotation, expansion and shear is similar to that in hydrodynamics; this time the respective changes apply to images of an object projected by the family of light rays on 2-surfaces orthogonal to the family. Like in hydrodynamics, rotation and shear do or do not vanish simultaneously with the scalars defined below.1 Also, the following equations are useful: p  p  = p  

g  p = p p = 2

p  = g   = 0

(16.41)

k  = k  =   =   = 0

The scalars of rotation, expansion and shear are then  1 2 1 def 1 k˙    2 =   = k k − 2k˙   − 2 2 4 1 1  = k  − k˙    2 2 def 1  2 =    2  1 2 1 = k k − 2k˙   + k˙   − 2

2 4 As can be seen, for affinely parametrised geodesics (k˙  = 0) these quantities 

(16.42) (16.43)

(16.44) actually



depend only on k , not on the auxiliary field  .

16.4 The apparent horizon We have already defined the event horizon for the Schwarzschild metric in Section 14.11. There is one more variety of horizon that is important for studying dynamical black holes, i.e. black holes that keep swallowing up new matter and increase their masses. The notion of the event horizon has the disadvantage that it can be defined only when we know the 1

We recall that, in the wave description of light, rotation is necessarily zero (see footnote cited above (16.3)).

16.5 * The double-null tetrad

243

whole future evolution of the spacetime. Hence, it is practically useless in observational cosmology. It is more realistic to use only such notions as can be identified by local observations of short duration. The apparent horizon is such a notion. In a flat spacetime, a flash of light sent from both sides of a closed surface has the property that the light rays are converging inside the surface and diverging outside. The convergence/divergence is measured by the scalar of expansion for the family of rays,  = 21 k  , defined in the previous section. However, in the vicinity of a singularity the outward-directed bundle of rays is convergent. This is most easy to see in the Kruskal diagram (Fig. 14.6): under the horizon H1 it is impossible to send any bundle of rays in the direction of increasing r because the light rays intersect lines of still-decreasing values of r (recall that each point in the Kruskal diagram represents a sphere t = constant r = constant). Hence, the area of the light front is decreasing for both bundles. A closed surface from which it is impossible to send a diverging bundle of light rays is called a closed trapped surface. Then, an apparent horizon is the outer envelope of the region in which closed trapped surfaces exist. There are two kinds of trapped surfaces and two kinds of apparent horizons, as seen in Fig. 14.6: the future-trapped surfaces and future apparent horizons in region II, and the past-trapped surfaces and past apparent horizons in region IV. For a past-trapped surface, the light rays converge towards the past. A more physical way to formulate this definition is to say that, for a past-trapped surface SP , both ingoing bundles of rays (i.e. those that simultaneously reach SP both from inside and from outside) are necessarily diverging, whereas for a future-trapped surface SF , both outgoing bundles of rays are necessarily converging (where ‘outgoing’ means starting their journey simultaneously at SF , both inward and outward). In the Schwarzschild spacetime, the apparent horizons coincide with the event horizons, but in nonstatic spacetimes these two horizons are different. Examples will be given in Section 18.8.

16.5 * The double-null tetrad We will set up a field of null vector bases over the spacetime that will include the k and  introduced in Section 16.3. The other vectors in the basis, m and m , will be complex conjugate to each other, orthogonal both to k and to  , and will obey relations similar to (16.30): g m m = g m m = 0 g m k = g m  = 0

g m m = −1 g m k = g m  = 0

(16.45)

Thus we have1

e 0  = k  1

e 1  =  

e 2  = m 

Hats mark tetrad indices. Where no confusion may arise, they will be omitted.

e 3  = m 

(16.46)

244

Relativistic cosmology I: general geometry

and, from (9.1), the tetrad metric is ⎡

0 ⎢   ⎢1 ij = ⎢ ⎣0 0

⎤ 1 0 0 0 0 0⎥ ⎥ ⎥

0 0 −1 ⎦ 0 −1 0

(16.47)

The upper and lower tetrad indices are related to each other as follows:

v 0 = v1 

v 1 = v0 

v 2 = −v3 

v 3 = −v2 = v 2

(16.48)

The tetrad components of the basis vectors are thus ki = i 1 

ki = i 0 

i = i 0 

i =  i 1 

mi = −i 3 

mi =  i 2 

mi = −i 2 

mi =  i 3

(16.49)

Some of the Ricci rotation coefficients in this basis, defined by (9.7), vanish in consequence of (9.14), thus  0 1a ≡ 11a = 0 = 00a ≡  1 0a   2 3a ≡ −33a = 0 = −22a ≡  3 2a

(16.50)

Some other Ricci rotation coefficients have physical interpretation. For example, the nonzero tetrad components of the shear tensor (16.40) are:  2 2 = k m m = − 1 22 ≡ −022 ≡ 202 ≡ − 3 02   3 3 = k m m = − 1 33 ≡ −033 ≡ 303 ≡ − 2 03

(16.51)

In order to calculate the expansion, we do the following operations k  = g k = ab ea  eb  k  and similarly for the term k˙   , and then we explicitly run through all the values of a and b. Most of the terms are zero or cancel out, and what remains is   1 1  1 1 1 1 (16.52)  23 +  23

 = − k m m + m m =  23 +  1 32 ≡ 2 2 2 For the tetrad components of the rotation tensor we find  1 1 (16.53)  23 −  1 32 = 32 = −23  2 all other components being zero. Thus, the only nonvanishing component of the rotation tensor is pure imaginary, and, moreover, as follows from (16.42) and (16.45), it is connected to the scalar of rotation  by 23 2 = −2 ; thus 23 = −i. As one can see then, the expansion and the rotation are, respectively, the real and the imaginary part of the same complex quantity 23 = −32 = −

 + i =  1 23 ≡ 023 ≡ −203

(16.54)

16.6 * The Goldberg–Sachs theorem

245

Finally, there are several identities among the Ricci rotation coefficients that are not self-evident; examples were given in (16.51) and (16.54). The double-null tetrad is a basis of a self-contained approach to relativity called the Newman–Penrose formalism. Although shuffling indices in it is sometimes confusing (because of the scalar metric being nondiagonal), this tetrad has proven useful and powerful in finding exact solutions of Einstein’s equations. For more on this formalism, see Stephani et al. (2003) and references cited therein. The various identities obeyed by the Riemann and Weyl tensors were deduced under the assumption that these tensors arise from commutators of second derivatives of tensors. However, if the basic objects in the theory are the Ricci rotation coefficients, like in the Newman–Penrose formalism, then the curvature tensors are present in first-order equations, and not all the ‘identities’ will automatically be fulfilled (in fact, only Rijkl = −Rijlk = −Rjikl and C i jil = 0). In the next two sections, and in Section 20.2, we will see some of those other ‘identities’ being imposed as equations to fulfil. The tetrad k  m m is not uniquely defined. One usually begins with a given family of null curves, so the direction of k is fixed, but the field k may be rescaled by an arbitrary factor k = Ak  

(16.55)

where A is an arbitrary real function. This change corresponds to changing the parametrisation of the curves tangent to k . The vectors m and m can be rotated in their plane by an arbitrary angle ; their scalar products with k do not change when a multiple of k is added to any of them. Thus m  m  are defined up to the transformations m = ei m + Bk  

(16.56)

where  is a real function and B is a complex function. Finally,  may be changed by a fixed multiple of k and a fixed multiple of a fixed vector in the m  m  plane, thus  = 

 1   + Bei m + Be−i m + BBk

A

(16.57)

As an example of usefulness of this tetrad, let us note how simply it expresses the criterion for the Weyl tensor being algebraically special, i.e. obeying (11.55). Projecting that equation on the double-null tetrad we obtain the equivalent equation C200d = C300d = 0

(16.58)

16.6 * The Goldberg–Sachs theorem There is a connection between properties of the optical tensors of Section 16.3 and the Petrov type of the Weyl tensor. We found a similar connection for the hydrodynamical tensors in Section 15.3, where  =  = 0 = u˙  forced the metric to be conformally flat.

246

Relativistic cosmology I: general geometry

In order to prove an analogous, but weaker, limitation imposed by the properties of the optical tensors, we must first list the full set of properties of an algebraically special Weyl tensor in the tetrad k  m m. With (16.58) assumed, the equations C s 0s0 = 0 imply −C0101 = C0213 + C0312 = −C2323  C0112 = C1223 

C0113 = −C1323 

(16.59)

C0212 = C0223 = C0313 = C0323 = C1213 = 0

The theorem we are going to prove consists of three parts that will be listed as separate theorems. Theorem 16.1 Assumptions: 1. The Weyl tensor is algebraically special, so that (11.55) and, equivalently, (16.58) are fulfilled. 2. The vacuum Einstein equations are fulfilled, R = 0. Thesis: The degenerate Debever vector field k in (11.55) is geodesic and shearfree, i.e. k˙  = k 

 = 0 =⇒ 202 = 303 = 0

(16.60)

Proof: Take the Bianchi identities R  = 0, contract them with g  and use the assumption R = 0. The result is equivalent to C    = 0. Now use (9.17) contracted with ae : ea  C a bcd +  s rs C r bcd −  s br C r scd −  s cr C r bsd −  s dr C r bcs = 0

(16.61)

Take the component b c d = 0 0 2 of this equation and use (16.58)–(16.59) together with (16.50). The result is 200 C0213 + C0123 − C0101  = 0

(16.62)

Then take the component (0, 0, 3) and make similar simplifications. The result is1 300 C0312 − C0123 − C0101  = 0

(16.63)

Thus, either 200 = 0 =⇒ 300 = 0, or else the expressions in parentheses must vanish. Consider first the second case. Then: C0123 + C0213 − C0101 = 0 −C0123 + C0312 − C0101 = 0 1

(16.64)

Note that (16.63) is the complex conjugate of (16.62) – which was to be expected, since the interchanges 2 ↔ 3 always correspond to complex conjugation in this tetrad. Thus, one could write down (16.63) on the basis of (16.62) without repeating the calculations. This is one of the advantages of the double-null tetrad.

16.6 * The Goldberg–Sachs theorem

247

and also the first of (16.59) and Cabcd = 0 must be obeyed: C0213 + C0312 + C0101 = 0 C0123 − C0213 + C0312 = 0

(16.65)

The solution of the set (16.64)–(16.65) is C0123 = C0213 = C0312 = C0101 = C2323 = 0

(16.66)

Now take the components (0, 0, 1) and (0, 2, 3) of (16.61), with (16.66) assumed. They are 300 C0112 + 200 C0113 = 0 = 300 C1223 + 200 C1323

(16.67)

Taking into account the middle part of (16.59), we see that with 200 = 0 = 300 the solution of (16.67) is C0112 = C0113 = C1223 = C1323 = 0

(16.68)

Take the components (0, 1, 2) and (0, 1, 3) of (16.61), with (16.66) and (16.68) assumed. They say that 300 C1212 = 0 = 200 C1313 , i.e. C1212 = C1313 = 0. Together with (16.58), (16.66) and (16.68) this means Cabcd = 0. With Rab = 0, this is the Minkowski spacetime, in which a congruence of shearfree null geodesics does exist, as can be verified by calculation in the Cartesian coordinates. Thus, the theorem is then true in a modified form: a shearfree null geodesic congruence exists. We return to (16.62)–(16.63) and take the other solution 200 = 300 = 0

(16.69)

This means, from the definition of the Ricci rotation coefficients, 0 =  3 00 = m k k = −k m k = −m k˙   0 =  2 00 = m k k = −k m k = −m k˙ 

(16.70)

Thus k˙  is orthogonal both to m and to m and must lie in the plane spanned by k and  . Since k˙  k = 0 and  k = 1, k˙  must be proportional to k , thus the first of (16.60) is proved. We can use the transformations (16.55)–(16.57) to rescale k so that k˙  = 0. Now take (16.61) with the sets of indices (2, 0, 2) and (3, 0, 3), and use (16.69). The result is 022 C0123 + C0213 − C2323  = 0 = 033 −C0123 + C0312 − C2323 

(16.71)

(again, the second equation is just a complex conjugate of the first one). Suppose that 022 = 0 ⇐⇒ 033 = 0. Since C2323 = C0101 , again we obtain a set of equations ((16.71) together with the first of (16.59) and with the cyclic identity – the second of (16.65)) whose solution is (16.66). The components (1, 0, 2) and (1, 0, 3) of (16.61) now say that 202 C0113 = 303 C0112 = 0. With the assumed 202 = 0 = 303 , and with (16.59), this implies (16.68) again. Then,

248

Relativistic cosmology I: general geometry

the components (1, 0, 1) and (1, 2, 3) of (16.61) become 303 C1212 + 202 C1313 = 0 = −303 C1212 + 202 C1313 . With 202 = 0 = 303 , the solution of this is C1212 = C1313 = 0, i.e. again Cabcd = 0. Thus (16.71) implies 022 = 033 = 0, which, as seen from (16.51), means that the shear of the k congruence is zero. Before formulating the next theorem, we must first write out a few equations. Take the Ricci identity for the null field k : k − k  = R k

We will project this on different combinations of the tetrad vectors. The following equations will be useful:    g  k ≡ k   = 2 + k˙     k g  k  ≡ k k   = k˙   −k  k 

(16.72)

(16.73) (16.74)



2

  k  k = 2  2 − 2 + 2 + b k˙  +  k˙     k m m k = k m m k  −k m  m k − k m m  k    k m m k  = m k m k  −m k  m k  −m m  k˙   m  k = g  m m = ab ea  eb  m m

(16.75) (16.76) (16.77) (16.78)

Equations (16.73) and (16.75) follow from (16.43) and (16.35)–(16.37). In simplifying the right-hand sides of (16.76) and (16.77) we will use (9.7), and in simplifying the right-hand side of (16.78) we will write out explicitly the terms corresponding to different values of a and b. Contract (16.72) with k g  ; the result is the equation of evolution of , analogous to the Raychaudhuri equation (15.43): 1 1 k  +  2 − 2 + 2 + A1 = − R k k  2 2

(16.79)

where A1 is a collection of terms containing acceleration:  2  def A1 = b k˙  +  k˙  − k˙   + k  k˙   

(16.80)

and vanishes when k˙  = 0 (the index in parentheses is just a label, it does not refer to the coordinates or to the tetrad vectors).   Now contract (16.72) with k m m − m m and use the fact that R k k ≡ 0. The result is   1  1 2  1 2  1 k  1 23  + (16.81)  23 −  32 − A2 = 0 2 2

16.6 * The Goldberg–Sachs theorem

249

where A2 is another collection of terms containing acceleration:   def A2 = −m m k˙   + m m k˙   + m m  k˙    −m m  k˙  − m k˙  2 1 13 +  2 10 −  1 31   + m k˙  2 1 12 +  3 10 −  1 21 

(16.82)

and vanishes when k˙  = 0 (in accord with the rest of (16.81), A2 is imaginary). In consequence of (16.53), Eq. (16.81) can be written as 1 ik  + 2i − A2 = 0

2

(16.83)

Equations (16.79) and (16.83) can be written as one complex equation: 1 1 1 1 k Z +Z2 +  2 + A1 − A2 = − R k k ≡ − R00  2 2 2 2

(16.84)

where def

Z = + i ≡  1 23

Next, contract (16.72) with k m m and use (16.76)–(16.78). The result is   k  1 22 + 2 1 22  +  3 30 + A3 = R0202 

(16.85)

(16.86)

where A3 is yet another collection of terms with acceleration:    def A3 = m m k˙   −m m  k˙  + m k˙  2 1 12 +  1 21

(16.87)

The result of contracting (16.72) with k m m can be written at once, as the complex conjugate of (16.86):   (16.88) k  1 33 + 2 1 33  +  2 20 + A3 = R0303

Finally, contract (16.72) with k m m and use (16.76)–(16.78) to obtain  2 k  1 23 +  1 23 +  1 22  1 33 + A4 = R0203 

(16.89)

where

   def A4 = − m m  k˙  + m m k˙   +m k˙  2 1 13 +  2 10 + m k˙   1 21

(16.90)

Since  1 23 =  + i = Z, we can use (16.84) to eliminate k  1 23 from the above and obtain  1 1 (16.91) A − A1 + A4 = R0203 + R00

2 2 2

250

Relativistic cosmology I: general geometry

At this point, we can formulate one more theorem: Theorem 16.2 Assumptions: 1. There exists a shearfree geodesic null vector field k on a spacetime. 2. The vacuum Einstein equations are obeyed, R = 0. 3. The Weyl tensor is nonzero. Thesis: The field k is collinear with one of the Debever vector fields. Proof: In the double-null tetrad, the condition for the field k to be collinear with a Debever vector field, i.e. to obey (11.54), is C0202 = C0303 = C0203 = 0

(16.92)

Choose the parametrisation on the curves tangent to k so that k˙  = 0. Then, with k˙  = 0 = ab , in consequence of R = 0 and of (16.51), equations (16.86), (16.88) and (16.91) imply (16.92). Now contract (16.72) with m  k to obtain   C0210 = − k  1 21 −  1 21  3 30 +  1 23 +  0 20  1 23   +  1 22  0 30 −  1 31 + A5 

(16.93)

where A5 is another collection of acceleration terms:  def A5 = − 2m k˙   1 11 −  m k˙   +  m  k˙  −  k˙   1 21

(16.94)

In order to prove the next theorem, we need the following lemma: Lemma 16.1 If k˙  = 0 =  and  + i = 0, then there exists such a transformation of the basis vectors (16.55)–(16.57) after which  1 21 = 0. The direction of the new  is uniquely determined. Proof: Apply the transformation (16.55)–(16.57) to  1 21 ; the result is 1  = ei  1 21 + B 1 23 + e2i B 1 22 + ei BB 3 00

21

(16.95)

1 = 0 when the assumptions In view of (16.51), (16.70) and (16.54) it follows that  21 i 1 1 1 are fulfilled and B = −e  21 / 23 . The property  21 = 0 is then preserved by the transformations (16.57) with B = 0, so the direction of the new  is indeed unique.

16.6 * The Goldberg–Sachs theorem

251

Comments: 1 1. The result  21 = 0 could be achieved also with  1 23 = 0, provided that  1 22  3 00 = 0. However, in the following we will be interested precisely in the case  1 22 =  3 00 = 0. 2. With k˙  = 0 =⇒  2 00 = 0 =  3 00  the transformation (16.55)–(16.57) does not change  1 23 and does not violate the equations  1 22 =  1 33 = 0. We can now prove the last part of the main theorem: Theorem 16.3 If there exists a shearfree geodesic null vector field k on a spacetime and the vacuum Einstein equations are obeyed, R = 0, then the Weyl tensor is algebraically special (i.e. it obeys (11.55)). Proof: In view of Theorem 16.2 and of Eq. (16.58), we need only show that C0102 = 0 in the double-null tetrad. As Lemma 16.1 demonstrates, the case  + i = 0 has to be considered separately. Thus we split the proof into two parts. Part I:  + i = 0   Contract (16.72) with k m  − m  ; the result simplifies to       k  1 12 −  1 21  +  3 30  1 12 −  1 21 +  1 23  0 20 −  1 21     +  1 32  1 12 −  0 20 +  1 22  1 13 −  1 31 + A6 = 0

(16.96)

where A6 contains the acceleration terms:

   def A6 = −m k˙   1 11 +  k˙  2 1 12 −  1 21 +  3 10 −  m k˙    + m  k˙   +  m  k˙  − m   k˙ 

(16.97)   Calculate −R02 = R0102 + R0223 ≡ R k  k m + k m m m . Since it was assumed that R = 0, it follows that     k  1 12 = − 1 12  1 32 +  1 23 +  3 30 +  1 21  1 32 −  1 23   +  1 32  0 20 +  1 22  0 30 + 2 3 33 − m  1 23 + m  1 22 + A7  (16.98) where

   def A7 = m  k˙   + m  k˙  −  k˙  2 1 12 +  3 10   + m k˙  2 3 13 −  1 11

Substituting (16.98) in (16.96) we find      k  1 21  = − 3 30  1 21 +  1 21  1 32 − 2 1 23 +  1 23  0 20 −  1 12   +  1 22 2 3 33 +  1 13 −  1 31 +  0 30  − m  1 23 + m  1 22 + A6 + A7 

(16.99)

(16.100)

252

Relativistic cosmology I: general geometry

where all the terms between the square brackets vanish when  = 0 = k˙  and  1 23 = 0. Substituting (16.100) in (16.93) we see that the thesis of the theorem follows when  1 23 =  + i = 0 22 =  1 22 =  1 33 = 0 and k˙  = 0. Part II:  + i = 0 Then we choose, as the lemma allows, a direction of  for which  1 21 = 0. As follows from (16.93), we then need only show that  = 0 = k˙  implies  0 20 ≡  3 10 = 0. Since  1 21 = 0 was achieved under the assumptions  = 0 = k˙  , we shall not display the shear and acceleration terms in what follows. Take the equation 0 = R22 ≡ 2R0212 = 2R k m  m ; it implies that the contraction of (16.72) with m  m is zero. After using the assumptions  1 21 =  1 22 =  2 00 = 0 + their complex conjugates we obtain the equation  1 23  0 22 = 0. Since we are considering the case  1 23 = 0, this means that  0 22 ≡  3 12 = 0 =⇒  0 33 ≡  2 13 = 0

Then take (16.100) with the current assumptions; the result is   m  1 23 =  1 23  0 20 −  1 12  and Eq. (16.89) becomes

 2 k  1 23 = −  1 23

(16.101)

(16.102)

(16.103)

Equations (16.102) and (16.103) imply the integrability condition, which, for noncommuting directional derivatives, has the form ea  eb     −eb  ea     = −2 c ab ec  

(16.104)

for an arbitrary function . Applying this rule to (16.102) and (16.103) we thus obtain      k  0 20 −  1 12  = −2 1 23  0 20 +  2 20 −  2 02  0 20 −  1 12

(16.105) Using (16.98) and (16.102) in this, we obtain   k  0 20 =  0 20 −3 1 23 +  2 20

(16.106)

Now, calculating 0 = R22 = R0 202 +R1 212 (in fact, R1 212 ≡ 0 under the current assumptions) and using (9.21) to calculate the scalar components of the Riemann tensor, we obtain  2 m  0 20 =  0 20  2 22 −  0 20

(16.107) Applying the integrability condition (16.104) to (16.106) and (16.107) we obtain     0 20 k  2 22 − m  2 20 =  0 20 − 0 02  2 20 − 9 0 20  1 23     −  2 02  2 22 −  0 20 +  2 20  2 22 +  0 20 (16.108) One solution of this is  0 20 = 0, which is the desired result. In order to verify the implications of the other alternative, we calculate the expression in parentheses on the left-hand side above from the equation 0 = R20 ≡ R1 210 −R2 220 , in which we use Eq. (9.21)

16.7 * Optical observations in the Universe – part II

253

to calculate the tetrad components of the Riemann tensor. The result is, in consequence of all the assumptions made,   k  2 22 − m  2 20 =  0 20  1 23 +  2 20 +  2 02 −  0 02  2 20   + 2 22  2 20 −  2 02

(16.109) Substituting (16.109) into (16.108) we obtain  0 20  1 23 = 0, which, in view of the currently considered case  1 23 = 0, implies  0 20 = 0. Thus,  0 20 = 0 in both branches of (16.108). Theorems 16.1–16.3 are summarised in the following theorem: Theorem 16.4 (The Goldberg–Sachs theorem) A vacuum spacetime is algebraically special if and only if there exists on it a geodesic and shearfree null vector field k . If the Weyl tensor is nonzero, then the field k is collinear with the degenerate Debever field. This theorem was first formulated by Goldberg and Sachs (1962).1 Parts of this result, such as Theorem 16.1 and the other theorems under additional assumptions, had been proven earlier; references to those results are given in the original paper. The theorem is useful in investigating vacuum solutions of Einstein’s equations; see Section 20.1. A few generalisations of Theorems 16.1–16.4 are known (Stephani et al., 2003), but their theses cannot be stated without more elaborate explanations. One generalisation of Theorems 16.2 and 16.3 can be verified rather easily. The field equations we used in proving these two theorems were not really R = 0, but R k k = 0 = R k m = R m m and their complex conjugates; the other equations used in the proof were properties of the curvature tensor. All the equations that we made use of remain valid when R = k k . However, such a generalisation does not hold for Theorem 16.1 (Stephani et al., 2003).

16.7 * Optical observations in the Universe – part II The Goldberg–Sachs theorem does not find any direct application in cosmology. Because of the assumptions made in it, it is mainly applied to vacuum solutions, and we will use it in Chapter 20 to derive the Kerr metric. However, some of the results derived along the way in proving it are useful in cosmology, and this is why it was presented in this chapter.

16.7.1 The area distance In curved spacetime, it is a problem to determine the distance between two objects. Abstract geometric definitions, such as the integral of ds along a uniquely defined spacelike path connecting two worldlines, are not satisfactory. We need a definition that would yield a distance measurable by means of astronomical observations. The reasoning used here is adapted from Ellis (1971), and the definitions of distance go back to Etherington (1933). 1

A few formulae in the later part of the proof in Goldberg and Sachs (1962) have misprints, which have been corrected here.

254

Relativistic cosmology I: general geometry

An observer moving with a 4-velocity u would measure the flux, i.e. the energy density, of radiation reaching him to be equal to  = T u u , where T is the energymomentum tensor of radiation, given by (16.15). Thus, neglecting terms of order :  =

 k u 2

4 

(16.110)

On the other hand, combining the conservation equation (16.16) with the surface-areapropagation equation (16.131) (see Exercise 2) we see that S is constant along the null geodesics, thus S s=s1 = S s=s2

(16.111)

(recall that S is the area of an orthogonal cross-section of the bundle of rays). Combining (16.110) and (16.111) we obtain  = constant × k u 2 /S. The subscript ‘e’ will denote quantities calculated at the centre; ‘O’ will denote the quantities at the observer. Remembering that k u e is constant along each null geodesic and using (16.20), we obtain   k u O 2 C C =  (16.112) O =  SO k u e SO 1 + zO 2 where C is constant in each bundle (it depends on the solid angle occupied by the bundle). Thus the flux decreases with increasing redshift. However, SO does not necessarily decrease with distance, as can be seen from (16.79). For geodesics, A1 = 0. Assume that  = 0 and R = 0 (vacuum) for simplicity. Then (16.79) shows that the derivative of  along k is negative, that is,  decreases and may become negative, too. This observation is expressed in brief by saying that curvature causes null geodesics to converge, even in vacuum. The conclusion remains true in a perfect fluid or dust, where R k k =  +p k u 2 > 0. Consequently, a situation shown in Fig. 16.1 is possible: an observer at Q will see the light source at G to have the same brightness as seen by the observer at P. For Q, the source will appear anomalously bright and anomalously large.1 In order to make (16.112) a workable formula, we have to calculate the constant C . Imagine then that we surround G with a sphere S with the centre at G and radius rS .2 Equation (16.112) shows that, for a given bundle of null geodesics, 1 + z2  S is constant along the bundle. On the surface of a sphere, S is proportional to the solid angle !G subtended by S, thus SG = rS 2 !G /4, where rS is the radius of the sphere S. Assuming that the source G radiates isotropically, and denoting by L its total luminosity

1

2

In actual observations, the redshift will decrease the flux of photons. The effect of focussing by curvature would be clearly visible only if the observer moved so as to cancel the redshift and if there were no absorption of light between the emitter and the observer. We assume the radius of the sphere to be sufficiently small that the space inside it can be approximated by the flat tangent space to the manifold. Otherwise, it might be impossible to construct such a sphere – for example, when the bundle has nonzero rotation.

16.7 * Optical observations in the Universe – part II

255

Q P

G

Fig. 16.1. A non-rotating null congruence in vacuum or in a perfect fluid necessarily has its expansion scalar decreasing along the rays. This may (if the distance is sufficiently large) eventually cause the expansion to become negative, which results in refocussing. The observer at Q would see the source G to be anomalously bright and large, if he were able to cancel the redshift. Actually, when the shear is nonzero, the geodesics will be refocussed not to a point, but to a caustic surface.

(i.e. rate of emission of radiation), we have on S S = L/4. Also, z = 0 on S (because S is close to the source), so, taking (16.112) on S, we have L 2 (16.113) r !G

4 S Now, following Etherington (1933) and Ellis (1971), we define the source area distance rG (from the source to the observer) by C =

def

SO = rG 2 !G

(16.114)

Finally, combining (16.112)–(16.114), we obtain O =

rS 2 L

4 1 + zO 2 rG 2

(16.115)

The quantity O can be measured (this is the flux of energy from a given source through a given surface sheet at the observer’s position) and so can zO ; rS is any unit of distance and can be chosen (for example, it can be the astronomical unit). However, rG cannot be measured because we cannot get close enough to the source to measure !S . With L being essentially unknown, Eq. (16.115) cannot be observationally tested. But we can define distance in another way. Imagine a surface sheet of area SG placed at the source G, and a bundle of light rays sent from this sheet in such a way that it converges to a single point at the observer’s position O (Fig. 16.2). Assume that the sheet is orthogonal to the central ray of the bundle and that the central ray is emitted from G. Let the solid angle filled by this bundle as it reaches O be !O . We can then define the observer area distance from G to O by def

SG =rO 2 !O

(16.116)

We can measure !O , and we can in principle calculate SG (for example, assuming that the bundle subtends the whole source, whose geometric size we know). In this way, we can in principle measure rO . It turns out that rO is uniquely determined by rG , as we show in the next subsection.

256

Relativistic cosmology I: general geometry

δSO O

δΩO p k′ k k = k′

δSG G

δΩG

Fig. 16.2. An illustration of the reciprocity theorem. Explanation is given in the text.

16.7.2 The reciprocity theorem Figure 16.2 will help in comparing rO and rG . The source of light G (suppose, a galaxy) sends a light ray from its middle point that hits the observer O, and a bundle of rays diverging from G that surrounds the central ray GO and, at G, fills the solid angle !G . The bundle has the projected area SO at the observer’s position. Another bundle of rays is sent from a surface sheet of area SG , positioned orthogonally to GO at the central point G. The second bundle converges at the observer, at the endpoint of the ray GO, and fills the solid angle !O . (Figure 16.2 shows a cross-section through one half of each bundle.) Let the affine parameter and the field of null vectors tangent to the first bundle be v and k, respectively, and let the same quantities for the second bundle be v and k . Along the ray GO, k = k . Let the field of geodesic deviation defined by the field k be p, and the deviation for the other bundle be p . Then the following is true:

16.7 * Optical observations in the Universe – part II

257

Theorem 16.5 (the reciprocity theorem) Assumption: The bundle k completely surrounds O, i.e. there are rays of the bundle in every direction from O within SO . Thesis: The area distances rO and rG are related by rG 2 = rO 2 1 + zO 2

(16.117)

Comment: The assumption would not be fulfilled if O were placed on a reflecting or absorbing surface, e.g. on a boundary between vacuum and opaque matter. Proof: Along the central ray we have v = v and k = k (but not p = p ). Thus, the geodesic deviation equation (6.56) and the symmetries of the Riemann tensor imply that, along the same ray, p

2  p  D p − p = 0

dv2 dv2

D

2

(16.118)

Consequently p

Dp Dp − p  = constant dv dv

(16.119)

along GO. Note that Eq. (6.54), with zero torsion, implies that k p  = p k  . Using this in (16.119) (where Dp /dv = p  k ), we see that the connection terms cancel out. From now on we will thus replace the covariant derivatives by ordinary derivatives. Taking (16.119) at G (where p = 0) and at O (where p = 0), we obtain     dp dp p  = − p 

(16.120) dv G dv O Of the vectors p at O we choose those that are orthogonal to the 4-velocity of the observer; of p at G we choose those that are orthogonal to the source 4-velocity. The chosen vectors span 2-dimensional planes tangent to the spacetime at O and G. Consequently, we can choose a pair of the deviation vectors at G that obey   dp1  dp2 = 0

(16.121) dv dv G This is possible, since the vectors dp /dv G , together with p G = 0, form the initial data for the linear set of equations (6.56), and so are in fact a basis of the 2-dimensional tangent plane at G. Condition (16.121) means only that we have chosen an orthogonal basis. We choose any vector p at O, and we make use of the assumption: since there are rays of the bundle in every direction from O in the plane orthogonal to GO at O, whatever

258

Relativistic cosmology I: general geometry

direction p O we choose, there will be another direction perpendicular to it. Thus we choose a pair of vectors such that p1 p2  O = 0 while (16.121) still holds. These were conditions imposed on the field p at both ends of GO. We now impose the condition on the field p :       dp2   dp1 p1 = 0 = p2

dv G dv G Through (16.120) this implies that     dp dp p1 2 = 0 = p2 1

dv O dv O

(16.122)

(16.123)

(16.124)

Since all the vectors lie in 2-planes at G and at O, the first equations of (16.123) and (16.121) imply that p1  G is collinear with dp1 /dv G , and then the second of (16.123) says that     (16.125) p1 p2 G = 0

By a similar consideration, (16.124) and (16.122) imply that     dp1 dp2 = 0

dv dv O

(16.126)

In consequence of (16.121), (16.122), (16.125) and (16.126), all scalar products between the vectors pi and dpi  /dv at G and O reduce to products of their lengths, denoted pi and pi . Thus SO =  p1 p2 O       dp   dp  !G =  1  ·  2   d d G

SG =  p1 p2 G         dp   dp  !O =  1  ·  2   d d O

(16.127)

where  is the radius at which the solid angles !G and !O subtend the surfaces SG and SO , respectively. It is related to v by d = −k u dv (see the text after (16.28)). Thus we have from (16.127), (16.123) and (16.124):        dp   dp  1 SO !O = p1  1  p2  2    dv dv O k u 2 O          1 dp dp = p1  2  p2  1    dv dv G k u 2 O    2 k u G =  (16.128)  2 SG !G

k  u O This is equivalent to (16.117) by (16.20), (16.114) and (16.116).

16.7 * Optical observations in the Universe – part II

259

The reciprocity theorem implies that If the observer moves so as to cancel the redshift, then equal projected surface areas at the source G and at the observer O fill equal solid angles at O and G, respectively. In Fig. 16.1, both rG and rO between the endpoints are zero, so (16.117) still holds, but the above conclusion does not. Recall that an observer at Q would see the source at G to be not only anomalously bright, but also to have an anomalously large angular size. Imagine the observer being placed on the symmetry axis and gradually removed farther from G. The angular size of G would then at first decrease. As the observer moves past the first refocussing point, the angular size would start increasing. Substituting (16.117) in (16.115) we obtain an expression for rO :  L rS

(16.129) rO = 4O 1 + z2 This allows us to calculate rO if we know L from theory and O from measurement. The rO calculated in this way is sometimes called the corrected luminosity distance.

16.7.3 Other observable quantities Having introduced the two definitions of distance, the redshift, the flux of radiation and the reciprocity theorem, one can define further observationally meaningful quantities. One of them is the number of radiation sources in a given volume. Consider again the bundle k in Fig. 16.2. Imagine that we move from the surface sheet SG (at the observer area distance rO from O) to a farther sheet S  at the distance rO + d. The d is connected to the affine parameter v on the bundle by d = −k u dv; see the text after (16.28). Let nx be the number of radiation sources per unit proper volume. The number of sources within the bundle between SG and S  will then be   dN = −rO 2 !O nk u G dv

(16.130) The integral of this over the volume of the bundle from O to SG will be the total number of sources of radiation within this volume. This quantity is considered in observational cosmology, and the procedure of determining it is called number counts. Other observationally meaningful quantities are: 1. 2. 3. 4.

The specific flux – the flux per unit frequency interval; The intensity of radiation – the flux per unit solid angle; The specific intensity – the intensity per unit frequency interval; The emission and absorption of light in the intergalactic space, and the optical depth.

While being useful for observations, these quantities do not really involve relativity in their definitions and properties, and are handled by routine mathematics. A good overview source for them is Ellis (1971); we will not discuss them here.

260

Relativistic cosmology I: general geometry

16.8 Exercises 1. Prove that any vector orthogonal to two linearly independent null vectors must be spacelike. Hint. Consider the vertex of the null cone, p0 , and choose the locally Minkowskian coordinates at p0 . 2. Using the methods of Section 15.1, prove that the expansion and rotation of a family of null geodesics have the same interpretation as the corresponding quantities in hydrodynamics. Show that shear changes the shape of a parallelepiped in a plane locally orthogonal to a ray, but preserves its surface area. Verify that the expansion scalar obeys 2 =

d lnS dv

(16.131)

where v is the affine parameter on the null geodesics and S is the surface area of the propagating light front of a bundle of rays at the parameter value v.

17 Relativistic cosmology II: the Robertson–Walker geometry

17.1 The Robertson–Walker metrics as models of the Universe The Robertson–Walker (R–W) metrics were derived in Section 10.7 as being spatially homogeneous in the Bianchi sense and at the same time isotropic. In the coordinates of Section 10.7, they are R2 t

ds2 = dt2 − 

1+

2 1 kr 2 4



  dr 2 + r 2 d 2 + sin2  d2 

(17.1)

where Rt (called the scale factor) is a function to be determined from the Einstein equations. The constant k, called the curvature index,   when nonzero, can be scaled to +1  Rt. After this, the R–W metrics or −1 by the transformations r = r / k, Rt = k are no longer one continuous family; they become three different metrics and the limiting transition k → 0 becomes impossible. This can cause difficulties when comparing the three classes with each other; see Section 17.4. Other representations of the R–W metric are also used. Let r=

2r  √ 1 + 1 − kr  2

⇐⇒

r =

r  1 + 41 kr 2

This changes (17.1) to (primes dropped for better readability):   2  dr 2 2 2 2 ds2 = dt2 − R2 t + r + sin  d d  1 − kr 2

(17.2)

(17.3)

When k = +1, the transformation r = sin 

(17.4)

   ds2 = dt2 − R2 t d 2 + sin2  d 2 + sin2  d2 

(17.5)

changes (17.3) to

where the hypersurfaces t = constant are 3-dimensional spheres.1 1

In (17.4) we assumed that r ≤ 1. With k = +1, the range 0 ≤ r ≤ 1 covers half of the 3-sphere. In order to cover the other  half, one has√ to employ a second copy √ of the coordinate chart introduced in (17.2) – as r goes from 0 to  r first increases from 0 to 1/ k, achieved at r = 2/ k, and then decreases to 0 as r → .

261

262

Relativistic cosmology II: the Robertson–Walker geometry

With k = −1, the transformation r = sinh 

(17.6)

   ds2 = dt2 − R2 t d 2 + sinh2  d 2 + sin2  d2 

(17.7)

changes (17.3) to

A hypersurface t = constant in (17.5) and (17.7) is a space of constant curvature: its Riemann tensor is RIJ KL = ±

1 IJ  Rt KL

I J K L = 1 2 3

with + for (17.5) and − for (17.7). When k = 0, it is seen from (17.1) and (17.3) that the hypersurfaces t = constant are flat. Because of these properties, the R–W spacetimes with k = +1 are colloquially called the ‘closed Universe’, those with k = −1 are called the ‘open Universe’ and the one with k = 0 is called the ‘flat Universe’. The first author to investigate these spacetimes was A. A. Friedmann1 in 1922 (the case k = +1, in the coordinates of (17.5)) and in 1924 (Friedmann, 1922) (the case k = −1; in coordinates different from all those used here, and partly with incorrect conclusions about the evolution (Krasi´nski and Ellis, 1999)). He solved the Einstein equations for these metrics, with dust source and with the cosmological constant allowed. He himself treated his result as merely a mathematical curiosity, since the expansion of the Universe had not been discovered yet at that time, and no application for those solutions in astronomy could be seen. Both papers were quickly forgotten – most astronomers and physicists had not been ready to accept their implications, while Friedmann was not a sufficiently prominent figure to win attention.2 Soon after finding these solutions, Friedmann died prematurely and had no chance to claim credit for his discovery when the expansion of the Universe was detected by Hubble (1929).3 The simplest case k = 0 was first introduced by Robertson (1929) in a systematic survey of spacetimes with the, so-called today, Robertson–Walker geometries. The case k > 0 was discussed by Lemaître (1927, 1931),4 who generalised Friedmann’s solution to nonzero pressure and was aware that the result reflects some properties of the observed Universe. Unfortunately, he used to publish his papers in a local Belgian journal, in French, and, being an unknown person at that time, did not win attention for his results, either. Four years later, when the expansion of the Universe was already well-known, Eddington asked whether exact models of the expanding Universe might be derived from the relativity theory (Royal Astronomical Society Discussion, 1930). It 1 2 3 4

The transliteration of his name from Russian is ‘Fridman’, but, following the original publications in German, the form ‘Friedmann’ became standard. Psychological/social factors of this kind do play a role in the acceptance of new results, also today, very unfortunately. As already mentioned, Hubble did not believe that the Universe is actually expanding. He insisted that recalculating the redshifts into velocities of recession is merely a convenient mathematical trick (Hubble, 1929, 1936, 1953). The 1931 paper is a partly updated English version of the earlier one.

17.2 Optical observations in an R–W Universe

263

was only then that Lemaître brought his paper from 1927 to Eddington’s attention; and the English translation (Lemaître, 1931) followed. The recognition of Friedmann’s role came gradually later (Krasi´nski and Ellis, 1999). The general metric (17.1) was first derived from geometrical considerations by Robertson (1933) and by Walker (1935). Friedmann and Lemaître derived the solutions of Einstein’s equations (with slightly different sources) for that metric. In view of this history, the spacetimes with this geometry are often called the Friedmann–Lemaître–Robertson– Walker (FLRW) models, but various subsets of this collection of four names are also in use. It seems appropriate to use the name Robertson–Walker when referring to the general metric (17.1) and the names Friedmann or Lemaître when referring to the explicit solutions. In each of the coordinate representations, (17.1), (17.3), (17.5) and (17.7), the Einstein tensor for the R–W metric is diagonal. This shows that, if the source in the Einstein equations should be a perfect fluid, then its velocity field can have only the zeroth component, and, because of u u = 1 and g00 = 1, the velocity must be u =  0 . This, ∗

in turn, means that all those coordinate systems are comoving: each matter particle has fixed spatial coordinates, and its proper time is the time coordinate in spacetime. The velocity field u =  0 has the following properties: u˙  = 0  =  = 0 and ∗

˙  = 3R/R. The velocity of expansion depends on time, but at each instant it is the same at all points of the space t = constant. The R–W spacetimes are the only perfect fluid solutions of the Einstein equations for which  =  = 0 = u˙  and  = 0. The proof follows from the paper by Stephani (1967a); see also Stephani et al. (2003). As we stated in Section 15.3, with  =  = 0 = u˙  and a perfect fluid source, the metric must be conformally flat. Theorem 37.17, p. 601 in Stephani et al. (2003), says that all conformally flat perfect fluid solutions are those found by Stephani (1967a). Those of them for which  = 0 have  =  = 0, but in general u˙  = 0. In the limit u˙  = 0 they reduce to the R–W metrics.

17.2 Optical observations in an R–W Universe 17.2.1 The redshift In order to apply (16.20) to the R–W spacetimes, we have to know the field of vectors tangent to light rays, k . In consequence of the spatial homogeneity of any R–W spacetime, all points within the same space t = constant are equivalent, so the result of any calculation will be independent of the spatial position of the observer. Let us then assume that the observer is at the origin, r = 0. A null geodesic sent off radially, with ˙0 = ˙0 = 0, will preserve the radial direction ˙ = ˙ = 0 at all other points. Hence, such a geodesic lies in the surface  = constant  = constant and obeys the equation R2 t

0 = dt2 − 

1+

2 1 kr 2 4

dr 2 

(17.8)

264

Relativistic cosmology II: the Robertson–Walker geometry

For a ray proceeding towards the observer sitting at r = 0 we thus have

to te

ro dt dr  =− 1 Rt re 1 + kr 2 4

(17.9)

It can be verified that v defined by dt 1 = dv Rt

(17.10)

is an affine parameter on the geodesic. In this parametrisation, the tangent vector to the geodesic in Eq. (16.20) is  1 2 1 1 k =  − 2 1 + kr  0 0  R R 4 



(17.11)

The velocity field is u =  0 everywhere, so k u = 1/R

(17.12)

1 + z = Rto /Rte 

(17.13)

and so in (16.20) we have

When R to  − R te  /R te  is small, developing Rto  by the Taylor formula around te and neglecting terms nonlinear in to − te  gives ˙   R ˙ e /Rte  to − te  ≈  z ≈ Rt R

(17.14)

since c = 1 in the coordinates of (17.8), so to − te =  is the distance from the light˙ def source to the observer; R = dR/dt. The same result follows from (16.29) when we recall ˙ that  = 0 = u˙  and  = 3R/R in the R–W models. This is the Hubble law, with the ˙ Hubble parameter H = c/3 = cR/R (the factor c appeared because the physical time  is related to the time coordinate t by  = t/c). The Hubble law in fact holds exactly in the R–W models. Note that t = Rt



re 0

dr 1 + 41 kr 2

(17.15)

is the distance of the light-source at the point r = re from the observer at r = 0. Since the coordinates are comoving, for each definite source of light we have re = constant, and then from (17.15) we find ˙ d R H = =  dt R c

(17.16)

17.2 Optical observations in an R–W Universe

265

17.2.2 The redshift–distance relation Assume that, this time, the origin is at the source G in Fig. 16.2. The element of surface area in the surface t = tv = constant r = rv = constant is, in the coordinates of (17.1),

2 R tv  rv dS = sin  d d 1 + 41 krv 2 On the other hand, close to the origin r = 0, the metric of the space t = tv is approximately flat, so in that space dS = rv 2 sin  d d, where d = sin  d d is the element of solid angle. Comparing these quantities with (16.114) we see that in the R–W models rG =

RO r  1 + 41 kr 2

(17.17)

where r is the r-coordinate of the observer and RO is the value of R at the time t = tv , when the ray passes the observer. By the reciprocity theorem (16.117), we then have rO =

RO r   1 + zO  1 + 41 kr 2

(17.18)

This provides a relation between r and the observable quantity rO , and (17.13) then provides a relation between R and the observable quantity z. The integral of (17.8) along a radial outgoing null geodesic is

r

t dt d r  (17.19) = 1  r2 te Rt  0 1 + k 4 We can calculate this integral when Rt is given explicitly. We will do it in Section 17.4. The quantities that are used in astronomy to characterise Rt are the Hubble parameter of (17.16)1 and the deceleration parameter q0 :  1 dH0 def  q0 = −RRtt /Rt 2 now ≡ −1 − 2 H0 dt

(17.20)

The sign of q0 tells us whether the expansion of the Universe accelerates Rtt > 0 or decelerates, and so is relevant for estimating the value of the cosmological constant.

17.2.3 Number counts This time, the observer will be at r = 0, and r will refer to the radial coordinate of the source G. If we assume that the number of radiation sources is conserved nu   = 0, then nR3 must be constant, so n = nO RO 3 /R3  1

It is most often denoted H0 , to stress that its current value is meant.

(17.21)

266

Relativistic cosmology II: the Robertson–Walker geometry

where the index ‘O’ refers to any fixed instant, e.g. the instant of observation. Taking the full solid angle O = 4 and substituting for the other quantities    in (16.130), namely for rO from (17.18), for  RO = R 1 + zO  from (17.13), for k u G = 1/R from (17.12) and for dv = −R2 dr/ 1 + 41 kr 2 from (17.9)–(17.10), we obtain for the total number of sources out to the distance corresponding to r

r r 2 dr def 3 Nr = 4nO RO 3 (17.22)  3 = 4nO RO Fr 1 2 0 1 + 4 kr The integral is equal to ⎧ ⎪ 1 ⎪ ⎪  − sin  cos  ⎪ ⎪ ⎪ 2k3/2 ⎪ ⎪ ⎨ F¯r  = r¯ 3 /3 ⎪ ⎪ ⎪ ⎪ ⎪ 1 ⎪ ⎪ ⎪ sinh  cosh  −  ⎩ 2−k3/2

1 2

def

sin  =

√

1+

def

sinh  = −

k¯r

for k > 0

1 k¯r 2 4

√ 1

for k = 0

2

k¯r

1+

1 k¯r 2 4

for k < 0

(17.23) (this is the same  that appears in (17.4)–(17.7)). Equations (17.22)–(17.23) provide (in principle!) a method to determine the sign of k observationally. However, in practice, the determinations of distance in cosmology are too imprecise to distinguish among the three forms of F .

17.3 The Friedmann equations and the critical density With a perfect fluid source, in a general geometry, the following unknown quantities must be determined from the field equations: six out of ten components of the metric tensor g (the remaining four can be fixed by choice of the coordinate system), the energy-density, the pressure and three components of the velocity field u (the fourth component is determined via the normalisation condition u u = 1). In total, this is 11 quantities to be found from 10 equations G = T , and the set is underdetermined. To make it determinate, we have to add one more equation, and usually this is the equation of state.1 This indeterminacy survives in the R–W metrics, in spite of their high symmetry. They automatically define a perfect fluid energy-momentum tensor. The energy-density, pressure and velocity field of the fluid are all determined as functions of the scale factor Rt and of its derivatives. In order to obtain a definite solution, we have to add an equation of state relating the pressure to the energy-density. With all functions depending only on t, this must be a barotropic equation of state  = p (see Section 15.5 for an 1

In vacuum, because of G

= 0, only six of the Einstein equations are independent (Stephani, 1990, pp. 160–168). In matter, the equations of motion T 

= 0 are in most cases not obeyed before all the field equations are solved. They are usually simpler than the Einstein equations and are solved first.

17.3 The Friedmann equations and the critical density

267

explanation of how very special this equation is). The equation of state is a differential equation that determines Rt. What equation of state is most appropriate for describing the Universe as a whole? At present, the mass-density in the Universe is so small < 10−28 g cm−3  that pressure does not influence the large-scale dynamics of matter and p = 0 is an acceptable hypothesis. This is the assumption that Friedmann made in obtaining his solutions (given in Sections 17.4 and 17.6). However, if we want to describe the evolution of the Universe with the early period of high density included, then we have to take pressure into account – and the equation of state cannot be the same at all times. A very brief description of the ‘history of the Universe’ is given in Section 17.10. We shall consider here the later periods and, following Friedmann (1922), we assume p = 0. Using any algebraic computer program, the tetrad components of the Einstein tensor in the orthonormal tetrad for the metric (17.1) or (17.3)1 are found, and the Einstein equations are ˙2 3k R + 3 =  −  R2 R2 

˙2 ¨ k R R = p +  =− + +2 R 2 R2 R

G00 = G11 = G22 = G33

(17.24) (17.25)

The equations of motion T 

= 0, which are integrability conditions for Eqs. (17.24)– (17.25), reduce here to the single equation  3 ˙ = 0 (17.26) R ˙+ 3R2 Rp With p = 0, this becomes the mass conservation equation def

R3 = constant = 3/4

(17.27)

˙ = 0, then (17.25) follows from (17.24) and where  = /c2 is the mass-density. If R ˙ (17.27). If R = 0, then the solution of (17.24)–(17.25) is the static ‘Einstein Universe’ ˙ = 0 we thus have only (12.82), and we shall not consider this case. With p = 0 and R Eq. (17.24) to solve, which becomes, in consequence of (17.27), 1 2G − k − R2  (17.28) c2 R 3 We can use (17.27) and (17.28) to obtain the formula for the critical density. With  = 0 ˙ and R/R = H/c – the Hubble ‘constant’, we obtain Rt 2 =

=

1

3k 3H 2 + 2 2 8G c R

(17.29)

Since the tetrad components of the Einstein tensor are scalars, and since in the R–W geometry they have to be spatially homogeneous, i.e. independent of the radial coordinate, they come out the same no matter which of the two coordinate representations is used. However, they would be different for (17.5) and (17.7) because there the constant k is scaled to +1 or −1, respectively.

268

Relativistic cosmology II: the Robertson–Walker geometry

The quantities  and H are in principle directly measurable.1 Hence, Eq. (17.29) gives us a possibility to determine the sign of k for the real Universe. If the observed density o is greater than the critical density def

cr =

3H 2  8G

(17.30)

then our Universe is closed (k > 0); if o < cr , then it is open; and if o = cr , then it is spatially flat (k = 0). If we take into account only that matter which is visible in telescopes, then o  cr . Taking the minimal value of H0 consistent with observations, H0 = 50 km s−1 Mpc−1 , we obtain cr = 0475 × 10−29 g cm−3 , while o ≤ 10−31 g cm−3 (Lang, 1974, p. 558). Greater values of H0 increase the discrepancy. However, orbital velocities of stars in galaxies indicate that galaxies contain large amounts of non-luminous matter. Estimates of density of that matter imply o ≤ 02cr (Coles and Ellis, 1997). Observations of galaxy clusters show that also the intergalactic space contains non-luminous matter, but including it does not allow one to make o greater than 03cr . Unfortunately, the debate about the average density of matter in the Universe, a valid scientific question, is compounded by enthusiasts of the inflationary models (see Section 17.8), who, more often than not, resort to lobbying (as opposed to scientific dispute) to promote their favourite subject. For these models it is essential that the spatial curvature of the Universe is very close to zero. The current majority view is that the actual density is equal to the critical one, and the invisible part is hidden in the form of ‘dark matter’ (Padmanabhan, 1993; Peebles, 1993) – that can be anything except matter known from laboratory – or in the form of ‘dark energy’, i.e. the cosmological constant (see Section 17.9). A serious and critical evaluation of various observational results concerning the amount of matter in the Universe is given by Coles and Ellis (1997). The history of astronomy teaches us that values of various parameters have sometimes been revised radically – because the final results follow via long chains of assumptions used in interpreting the observations. These assumptions change as knowledge advances. Hence, all such numbers must be treated as temporary. It is possible that future observations will render o closer to cr . However, the current real knowledge (as opposed to postulates and expectations) gives no grounds to assume that o is greater than 03cr , and this low density is no problem for any theory but inflation. Moreover, the notion of a critical density applies only to the R–W models. In more general cosmological models (see Chapters 18 and 19) the curvature index k is a function of position. In those models, the local value of matter-density is not connected with the type of evolution. Hence, the whole discussion of the relation between o and cr concerns only a limited class of models and is not necessarily important for the long-term evolution of our real Universe.

1

The difficult element is measuring the distances. All methods used to measure intergalactic distances rely on various theoretical assumptions that are difficult to verify, and they can be carried out for relatively near galaxies. For very distant galaxies, in astronomical practice the Hubble law is assumed to hold exactly, and then unceremoniously used as a measure of distance.

17.4 The Friedmann solutions with  = 0

Equation (17.28) can be written as follows: 1/2  dR 2G 1 2 =± − k − R  dt c2 R 3

269

(17.31)

The general solution of this equation can be expressed in terms of elliptic functions. We will discuss these solutions qualitatively in Section 17.6. 17.4 The Friedmann solutions with  = 0 With  = 0, Eq. (17.31) becomes  1/2  1/2 2G 2 dR def =± − k − k =  dt c2 R R

(17.32)

The solutions of this equation are best represented in a parametric way. For k < 0 we obtain:   R = − cosh − 1 sinh −  (17.33) t − tB = k −k3/2 where is the parameter and tB is an arbitrary constant. Usually, the time coordinate is chosen so that tB = 0. For k = 0 the solution is  1/3 9 R=  t − tB 2  (17.34) 2 In this case the constant  can be scaled to any arbitrary value by transformations of r, so its actual value merely defines the unit of distance and has no physical meaning. (Unlike in the previous case and in the next case, where the value of  is related to the curvature of space at a given time.) Finally, for k > 0, the solution of (17.32) is   R = 1 − cos  t − tB = 3/2  − sin  (17.35) k k ˙ > 0. As In all three cases we have taken into account the observed fact that at present R we predicted in Section 15.4, each of these solutions has a singularity at t → tB , at which R → 0 and  → . At that instant (in the past), all matter of the model was condensed in one point. The last model has a second such singularity, in the future, at 2 2G 8 2 Go Ro 3 = tB + 3/2 2 = tB +  (17.36) 3/2 k k c 3k3/2 c2 The models (17.33) and (17.34), if they are expanding at the initial instant, will continue to expand for an infinite time. The model (17.35) has a finite lifetime; at t = tFS its existence is terminated. The graph of Rt corresponding to different values of k is shown in Fig. 17.1, which again explains the dangers connected with rescaling of k = 0 to 1. Formally, Eqs. (17.35) describe a flattened cycloid, on which t runs through an infinite range, while R oscillates between 0 and Rmax = 2/k = 2G/kc2 . However, dR/dt → as t = tFS , and the integration of (17.32) through this point is not possible. This is why the k > 0 Friedmann Universes have only a finite time of existence equal to tFS − tB  (note that the value of this quantity depends on k!). t = tFS = tB +

270

Relativistic cosmology II: the Robertson–Walker geometry

R(t)

k = 0 limit after rescaling | k | to 1

k<0

k=0

k>0

time t = tB

Fig. 17.1. The functions Rt corresponding to Friedmann models with different values of k. When k → 0, the rescaling of R required to achieve k = 1 maps the k = 0 graph into the vertical straight line at t = tB , and no place is left for the k < 0 models. Note that, for models with k > 0, the actual value of k determines the lifetime of the model, so it has physical meaning. Similarly, for models with k < 0, the value of −k determines the asymptotic value of the expansion velocity, ˙ as t → . Thus, rescaling k results in tampering with physical parameters. R,

17.4.1 The redshift–distance relation in the  = 0 Friedmann models Having found the explicit forms of Rt, we can now integrate Eq. (17.19), to find the observer area distance as a function of the redshift, the Hubble parameter and the deceleration parameter. From (17.32) Rtt = −/R2 , and from (17.20) Rtt = −q0 Rt 2 /R ≡   1/3 . Using this, Eq. (17.32) can be rewritten as −q0 RH0 2 . Thus R = / q0 H0 2 H0 2 =

2 k k − 2 = 2q0 H0 2 − 2/3 q0 2/3 H0 4/3  3 R R 

(17.37)

Note that the sign of k is the same as the sign of 2q0 − 1, and q0 = 1/2 when k = 0. From here, when k > 0,  3/2  q0 k 1 k  R=  (17.38) = 2q0 − 1 H0 H0 2q0 − 1 The integrals in (17.19) are different for each k. For k > 0 the result is

√  1 kr =  t − te   arctan 2 2

(17.39)

17.5 The Newtonian cosmology

271

But, from (17.35), t = arccos 1 − kR/ and te  = arccos 1 − kR/1 + z. Substituting for  and R from (17.38) we obtain   q0 z + q0 − 1 2q0 z + 1 − 1  (17.40) rO = H0 q0 2 1 + z2 Going back to (17.38) and repeating the whole calculation for k < 0 we obtain again (17.40), even though the intermediate formulae are different. With k = 0, we substitute q0 = 1/2 in (17.40) and obtain √ 1+z−1 rO = 2  (17.41) H0 1 + z3/2 The limit of (17.40) at q0 → 0 is rO = 1/2H0 1 − 1/1 + z2  This corresponds to  = 0, i.e.  = 0, which is the Minkowski spacetime in coordinates connected with an expanding family of timelike straight lines. Equation (17.40) is called the Mattig formula (Mattig, 1958). Note that drO /dz = 1/H0 > 0 at z = 0 and becomes negative as z → . Thus the function rO z is increasing at small z and decreasing at large z, achieving a maximum in between. This means that there is refocussing in the Friedmann models with  = 0. This is true for every k, including k = 0, for which the maximal rO occurs at z = 8.

17.5 The Newtonian cosmology We will now use Newton’s theory to describe the motion of a cloud of particles that interact only by gravitation. We will make the same assumptions that had led us to the R–W models in relativity: a homogeneous and isotropic matter distribution,  = t, and a spherically symmetric initial distribution of velocities: x (17.42) vi t0  = vt0  r i  r Let us consider the motion of the particle on the sphere of radius rt. Since the distribution of matter is spherically symmetric, the force exerted on this particle by matter that lies outside this sphere is zero (see Exercise 3). The particle thus moves in the gravitational field created by matter inside that sphere, i.e. in the potential 4 GM = − Gtr 2 t r 3 Consequently, the equation of motion of the particle is Vr = −

v GM 4 v dvi ≡ i + vj i = − 3 xi = − Gtxi t dt t xj r 3 Using Eq. (17.44) one can easily verify that d v  i

dt

v

= 0

(17.43)

(17.44)

(17.45)

272

Relativistic cosmology II: the Robertson–Walker geometry

√ where v = vi vi , i.e. the direction of the velocity vector at every point remains the same for all time. Therefore, using (17.42) we can rewrite (17.44) as follows: v GM 4 dv v ≡ + v = − 2 = − Gtr dt t r r 3

(17.46)

This is the equation of motion. The equation of continuity /t + vi i = 0, in consequence of  = t, (17.42) and (17.45), takes the form 2 1  + vr + v = 0  t r

(17.47)

1  def = − 3Ft  t

(17.48)

We denote   Then we have in (17.47) r 2 v r = 3Ftr 2 , which is integrated to give vt r = Ft rr +

 t  r2

We substitute this in (17.46) and obtain   2 4  ˙ ˙ F − 3 = − Gtr F r + 2 + Fr + 2 r r r 3

(17.49)

(17.50)

This is an algebraic equation in r whose coefficients are functions of t. The coefficients of different powers of r have to vanish separately, hence  t = 0

4 F˙ + F 2 = − Gt 3

(17.51)

Consequently, (17.49) becomes vt r = Ftr

(17.52)

and from (17.42) we have vi = Ftxi , i.e. the Hubble law. Equation (17.52) can be integrated again since v = dr/dt. We substitute this and (17.48) in (17.52) and obtain 1/rdr/dt = −1/3/t, which is integrated with the result rt = A/1/3 , where A is an arbitrary constant. Hence, for each particle separately def

r 3 = A = constant =

3M  4

(17.53)

This is the analogue of (17.27) in the Friedmann solution. Substituting (17.53) in (17.48) and then substituting the result in (17.51) gives r¨ /r = −GM/r 3 . This is easily integrated with the result 2GM − 2K (17.54) r˙ 2 = r where K = constant. This equation has the same form as (17.32). Thus, it has the same three types of solutions. In relativity, Eq. (17.32) defined the scale factor Rt that determined the changes of distance (see (17.15)). Here, Eq. (17.54) determines the distance of an arbitrary particle from the origin of the coordinate system. In the R–W

17.6 The Friedmann solutions with 

273

models, the constant k determined the sign of the spatial curvature. Here, multiplying (17.54) by m, the mass of a fluid particle, we see that the quantity −mK is the total energy of the particle. If K > 0, then the energy is negative; then at r → GM/K the velocity of the particle decreases to zero; the particle turns back towards the origin and falls onto it in a finite time. When K = 0, the particle can escape infinitely far from the origin, but its velocity tends to zero as r → . If K < 0, then r˙ → r˙0 > 0. r→

Equation (17.54) was first found and interpreted by Milne and McCrea (1934), and the authors were surprised that this result had not been known earlier. It is so elementary that it could have been found still in the eighteenth century, if only anybody had allowed for the possibility that the Universe is not static (this is one more piece of evidence of the role played by psychology and prejudice in science). However, until Hubble’s discovery of the expansion of the Universe, everybody believed that the Universe was unchanging in time. Although the Milne–McCrea solutions are formally identical with the Friedmann solutions, their physical interpretation is not the same. The solutions of (17.54) contain typical Newtonian notions such as absolute space and absolute velocity of matter (relative to space points). In contrast to relativity, they do not imply any law of propagation of light rays and lead to a contradiction with special relativity. Making the Milne–McCrea model consistent with special relativity requires the extension of Newton’s theory by new postulates. Such a theory (called ‘kinematical relativity’) was devised by Milne in later years (Milne 1948), but it did not gain acceptance in the physics community because, unlike relativity, it was well suited only to this particular cosmological model.

17.6 The Friedmann solutions with the cosmological constant Now we will discuss the full Friedmann equation (17.28). For later convenience we denote  = −. Equation (17.28) becomes then ˙2 = R

2G 1 − k + R2  2 cR 3

(17.55)

˙ 2 = 0 in the plane of the parameters  R is shown in The graph of the equation R Fig. 17.2. For k ≤ 0 the function R determined by this equation is monotonic and negative for all R. With k > 0, the function R increases from − at R = 0 through 0 def

(attained at R = 2G/c2 k) to the maximum equal to  = E = c4 k3 /9G2 2 , attained def

at R = 3G/c2 k = RE , and then monotonically decreases and tends asymptotically to zero as R → . Since  is a universal constant, R can vary only along straight lines parallel to the R-axis. Since the  calculated from (17.55) is never smaller than the  determined by ˙ = 0 curves, the allowed area for R-values is above the corresponding R ˙ = 0 curve, the R ˙ = 0. By definition, Rt > 0. This implies the following: and the extrema of R lie on R • (1) For  < 0, only models oscillating between R = 0 and R = Rmax exist. The Rmax is greater for k < 0 and smaller for k > 0. The ‘cosmological attraction’ implied by  < 0 will always halt and reverse the expansion of the Universe.

274

Relativistic cosmology II: the Robertson–Walker geometry

λ λE

k>0 RE

R

R1

k=0

k<0

˙ = 0 in the R  plane. The area accessible for evolution is above Fig. 17.2. The curves R each curve. R1 = 2G/c2 k is the size of the Universe at maximal expansion when  = 0. E = c4 k3 /3G2 is the minimal value of  at which R changes between 0 and ; it corresponds to the maximum of the k > 0 curve that occurs at R = RE = 3G/c2 k.

• (2) For  = 0 and k ≤ 0 there exist solutions in which matter expands monotonically from infinite density at R = 0 to zero density at R → ; they were discussed in Section 17.4. • (3) For  = 0 and k > 0 there exists a solution oscillating between R = 0 and Rmax = 2G/c2 k. • (4) For 0 <  < E the following cases exist: (4a) If k ≤ 0, the model constantly expands from a singular state at R = 0 to zero density at R → , or constantly contracts from R = to R = 0. Note that the derivative ˙ in (17.55) cannot change sign in this case. Moreover, if R ˙ > 0, then R ˙ is an R increasing function of R. The expansion thus proceeds with acceleration – this is the influence of the ‘cosmological repulsion’ implied by  > 0. (4b) If k > 0, then we have two cases: 4bA  If R < RE = 3G/c2 k, then the model is oscillating. 4bB  If R > RE , then the model contracts from zero density at R = to a ˙ min  = 0), and then expands again finite maximal density at R = Rmin (with RR to R → . • (5) For  = E there are several possibilities: (5a) If k ≤ 0, then the model constantly expands or contracts, like in case (4a). (5b) If k > 0 and R < RE , then the model either expands from a singular state at R = 0 asymptotically to R = RE at t → , or contracts from the asymptotic

17.6 The Friedmann solutions with 

275

state R → RE at t → − to a singularity at R = 0. It can be easily verified that for  = E the right-hand side of (17.55) has a double root R = 3G/c2 k, and then the time required to reach RE = 3G/c2 k, −1/2

3G/c2 k  2G 1 2 R dR (17.56) − k +  t= c2 R 3 E t0 is infinite. (5c) If k > 0 and R > RE , then the model either expands from an asymptotic state R → RE at t → − to R → at t → , or contracts from R → at t → − to R → RE at t → . (5d) For k > 0 there also exists the static solution R ≡ RE , which is unstable. This is the ‘Einstein Universe’ (12.82). It is unstable because a small perturbation of R will cause it to become expanding as in case (5c) or contracting as in case (5b). • (6) For  > E , independently of the sign of k, there exist only models that monotonically expand from R = 0 to R → or monotonically contract. Just as in cases ˙ increases with (4a) and (5c), the expansion proceeds with acceleration, since R increasing R. These facts are summarised in Figs. 17.3–17.5. Figure 17.3 shows all the possible oscillating models. With  negative, the maximal size of the oscillating model with k ≤ 0 R

RE R0 (I)

(II)

(II)

(IV) time

Fig. 17.3. The scale factor as a function of time for recollapsing Friedmann models, for different values of the curvature index and of the cosmological constant. Curve (I): k > 0  < 0; curve (II): k > 0  = 0 (this is one of the models considered in Section 17.4); curve (III): k > 0 0 <  < E ; curve (IV): k ≤ 0  < 0. The horizontal line RE is the constant value of R = RE = 3G/c2 in the static Einstein Universe. The horizontal line R0 is the maximal value of R in the recollapsing  = 0 model. As seen from Fig. 17.2, negative  will always force recollapse, irrespective of the sign of k. However, with k ≤ 0, an arbitrarily large maximal R can occur with a sufficiently small absolute value of . For better visualisation, the parameters of the four curves were chosen as close to each other as possible. On all curves, G/c2 = 1. On curve (I) k = +1  = −01; on curve (II) k = +1  = 0; on curve (III) k = +1  = +01; on curve (IV) k = −1  = −01. With negative  of sufficiently great absolute value, the lifetime for k ≤ 0 models may be shorter than in any k > 0 model.

276

Relativistic cosmology II: the Robertson–Walker geometry R

(I)

(II)

(V)

(VI)

E (II)

(IV)

t

Fig. 17.4. The graphs of Rt for those Friedmann models in which  = E . The dotted horizontal line marked E is the static Einstein Universe in which R = RE = 3G/c2 k. Curves I–IV represent models that approach the Einstein Universe asymptotically towards the future or towards the past; for all of them k > 0. On curve I, R > RE and Rt < 0. On curve II, R > RE and Rt > 0. On curve III, R < RE and Rt > 0. On curve IV, R < RE and Rt < 0. Curve V represents the model with k = 0, curve VI the model with k < 0. Curves V and VI have inflection points at intersections with R = RE . Time-reverses of curves V and VI (i.e. collapsing models) are also solutions of Eq. (17.55), but are omitted for clarity. Curves III-VI represent models that have singularities in the past or in the future. Curves I and II represent models with no singularity. Note that the static Einstein Universe is unstable: an arbitrarily small perturbation that sets R off the value RE will cause the model to expand or contract away from the initial state. The actual values of parameters in the figure are G/c2 = 1 on all curves, k = +1 for curves I–IV and k = −1 for curve VI.

can be arbitrarily large, and the lifetime of the model can be arbitrarily long. Figure 17.4 shows all the models for which  = E , and Fig. 17.5 shows the remaining models. With  = 0, the connection between the sign of spatial curvature and the type of motion no longer holds. There are models with negative spatial curvature that recollapse after a finite time (case (1)) and models with positive spatial curvature that expand to reach infinite extent (cases (4bB ), (5c) and (6)). The latter do not always attain a singular state. The fact that, with  < 0, models expanding with acceleration may exist will be important in the discussion of horizons in the next section.1 The discussion introduced above was first presented by Friedmann in his original papers (Friedmann, 1922); it can also be found in the book by Robertson and Noonan (1968) and, in a more extended form, in Rindler (1980). Friedmann’s original discussion was incomplete because he considered only the case k = +1, and did not know the case k = 0. 1

Currently, it is believed that our observed Universe is accelerating; see Section 17.9.

17.7 Horizons in the Robertson–Walker models

277

R (I)

(II)

(II)

(IV)

(V)

(VI)

E

t

Fig. 17.5. The graphs of Rt for the remaining Friedmann models, for different values of the curvature index and of the cosmological constant. The horizontal line E is the constant value of R = RE = 3G/c2 k in the static Einstein Universe. On curves I–III 0 <  < E ; on curves IV–VI  > E . On curve I k > 0 and R > RE , on curve II k < 0, on curve III k = 0. On curves IV, V and VI k is, respectively, negative, zero and positive. Curves II and III have their inflection points for R > RE ; curves IV–VI have their inflection points for R < RE . Positive  implies cosmic repulsion that opposes gravitational attraction. Beyond the inflection point the repulsion definitely prevails and sets the Universe into accelerated expansion. With large initial R, the repulsion prevents collapse even for k > 0.

17.7 Horizons in the Robertson–Walker models This section is a brief presentation of the results of Rindler (1956). Every observer in the Universe receives information about distant objects via null geodesics. It turns out that in most of the Robertson–Walker models there exist, for every observer, such objects, from which he/she has not yet received any signal. Then, in some of the R–W models (those which expand with acceleration) objects exist from which a given observer has not received and will never receive any signal. The boundaries separating objects already observed from those not yet observed, and objects observable from unobservable, are called horizons. This definition will be made precise below. The event horizon for an observer A is the hypersurface in the spacetime that divides the collection of all events into two nonempty classes: those events that have been, are being or will be observed by A, and those that A has never observed and will never be able to observe. Not every R–W spacetime has event horizons. The particle horizon for an observer A at the instant t0 is a 2-dimensional surface in the space t = t0 that divides all particles (i.e. worldlines of matter) into two nonempty classes: those that had been observed by A up to t = t0 , and those that A has not yet observed.

278

Relativistic cosmology II: the Robertson–Walker geometry

There exist R–W models that do not possess any of these horizons (for example, the Newtonian model described in Section 17.5). All the Friedmann solutions with  = 0 have particle horizons. We will use the R–W metric (17.1). Let us define √  ⎧ kr √2 arctan ⎪ for k > 0 ⎪ 2 k ⎨

r  dr def r = (17.57) = r for k = 0 1 2  1√  ⎪ 0 1 + kr  ⎪ 4 1+ −kr ⎩ √1 ln 2√ for k < 0 −k

1− 21

−kr

This quantity is proportional to the length of the arc of the r-curve t = constant  = constant  = constant between the point r = 0 and the point with the current value of r. For an observer at r = 0, the equation of motion of a particle at r = r1 is t r1  = Rtr1 

(17.58)

The equation of motion of a photon emitted at r = r1 and proceeding towards the observer at r = 0 is, from (17.8), (17.9) and (17.57),

t d r = r1  −  (17.59) t1 R √ √ With k < 0 we have r → for r → 2/ −k, hence the√range r ∈ 0 2/ −k covers the whole space t = constant. For k > 0 we have  → / k for r → . Hence, r = corresponds to the point that is antipodal to r = 0 on each sphere t = constant. The r-curve can, of course, be continued beyond this point, although the coordinate r does not cover the extra stretch. The extended line may wind multiply around the sphere √ t = constant.  where On such multiply wound curves we will define  to be r = n/ k + r,  n is the number of passages of the curve through the poles r = 0 and r = , and r is the quantity calculated by (17.57) between the final point r and the last pole passed. Hence, also in the model with positive curvature, a point in the space t = constant can be assigned to every value of . The reasoning below applies to models of infinite time of existence. For recollapsing models, modifications are necessary and they will not be discussed here. For example, the limit t → has to be replaced by t → tFS , where tFS is the instant √ of the final singularity, and ‘finite limit’ has to be replaced by ‘value smaller than / k’. With k ≤ 0, the necessary and sufficient condition for the existence of an event horizon t is the convergence of the integral t1 d/R to a finite limit at t → . Then, there exist particles at r = rH (with rH  < ) such that the photon emitted from there at t = tH will not reach the observer at r = 0 (where 0 = 0) even after an infinite time. From (17.59) we obtain for rh (the minimal value of rH )

d rh  = <  (17.60) th R √ With k > 0, the √event horizon exists if rh  defined by (17.60) obeys rh  ≤ / k. With rh  > / k, each photon sent from r = rh will manage, in a finite time, to travel

17.7 Horizons in the Robertson–Walker models

279

farther than half of the circumference of the Universe, and, in consequence of this, the light signal from the emission event will reach the observer at r = 0 on one route or another. For the recollapsing models with k > 0, the event horizon may exist even if √ def  t rH  = tHFS d/R > / k (see the example below). In consequence of the isotropy of the R–W models, if there exists rh obeying (17.60) (or the corresponding condition for k > 0), then the event horizon exists for every direction of observation. In consequence of their homogeneity, the origin r = 0 may be placed at any point of the space t = constant. Hence, if there exists an event horizon for one given observer, then event horizons exist for all observers. When the event √ horizon exists, the events whose coordinate r obeys r > rh (when k ≤ 0) or rh < r ≤ / k (when k > 0) will never be observed by the observer at r = 0. How can this be explained intuitively? If Rt increases sufficiently rapidly, then the spatial distance between the observer at r = 0 and the light source at r = r1 > rH , given by (17.58), increases so fast that the light cannot overcome this ‘swelling of space’, even though it keeps going towards the observer. Eddington once explained this as follows: imagine a runner who runs on an expanding race track whose finish line moves away faster than the ˙ is a maximum speed at which the runner can run. In the Friedmann models with  = 0 R decreasing function. Consequently, with k ≤ 0, every event  t will eventually become visible for every observer. From (17.33)–(17.34) it follows that t12 d/R → , i.e. the event t2 →

horizons do not exist. However, with k > 0 = 2 at the final singularity, and then

2 1

t2 d 2 − t1  = d =  (17.61) r1  = R k k t1 t1  Hence, if t1  >  (i.e. t1 > /k), then events at t > t1 and r > r1 will not become visible for the observer at r = 0 before the final singularity occurs. √ The event horizon will thus exist, although the integral in (17.61) is smaller than / k for t1 < /k. From (17.59) it is also seen that, if a particle was initially in the field of view (i.e. inside the event horizon) for the observer A, then it will remain visible to him for ever. This is because, if the equation

t0 d 0 = r1  − (17.62) t1 R has a solution for t1 at a given r1 and a given reception time t0 , then it will have a solution for all times t > t0 . Proof: Since r1  does not depend on t, the solution of the problem consists in finding an integration interval in which the integral in (17.62) has a given value. From Fig. 17.6 one sees that if one such interval t1  t0  exists, then for every t0 > t0 there will exist a t1 > t1 such that

t0 d

t0 d = t1 R t1 R (if 1/Rt is continuous, but this we are assuming all the time).

280

Relativistic cosmology II: the Robertson–Walker geometry 1/ R

t t1

t0

Fig. 17.6. An illustration to (17.62). If the integral of a continuous function 1/R over the interval t1  t0  equals r1 , then for every t0 > t0 there exists a t1 > t1 such that the integral of the same function over t1  t0  has the same value r1 .

If the event horizon exists (i.e. r1  < for t0 → in (17.62)), then t1 goes to a finite limit tout as t0 → . This means that, although the particle at r = r1 will always be visible to the observer A, he/she will see it only up to the instant t = tout on the particle’s clock. The signal sent out from r = r1 at t = tout will reach A after an infinite time (t0 → ), i.e. never. This, in turn, means that the worldline of the particle at r = r1 will intersect the event horizon of A at the instant t = tout . Moreover, a tout < exists for every r1 < rh . Consequently, when the event horizon exists, each particle different from A will be visible to A only for a finite period of its history and will eventually escape from A’s field of view through the horizon. The crossing of the horizon occurs in the infinite future of A. The farther away the particle, the shorter the period of its history that will be visible to A. The necessary and sufficient condition for the existence of a particle horizon is the convergence of the integral in (17.62) to a finite limit at t1 → 0. (In those models that have no initial singularity, it is the convergence to a finite limit at t → − . The analysis of this second case is similar and will be omitted here.) When the integral is finite at t1 → 0,

t0 d def r1  = = t0  (17.63) 0 R determines the farthest particles from which the observer at r = 0 could have received a light signal up to t0 . If r1 −→ in (17.62), then the observer at r = 0 could receive t1 →0

signals from all other particles for any t0 . At fixed t0 , (17.63) is an equation of a 2dimensional sphere. Since 1/R > 0, the function t is increasing. This means that, if the particle horizon exists, then with time still more particles come within it. Whether every particle will eventually enter the particle horizon depends on whether the integral in (17.63) has a finite limit at t0 → . If it has, then, according to the previous definition, the event horizon exists and some particles will never enter A’s field of view.

17.7 Horizons in the Robertson–Walker models

281

The first signal received by an observer A from each particle is the signal sent out at the initial singularity at t = 0. However, by Eq. (17.13), the signal sent out at te = 0 (for which Rte  = 0) is received with an infinite redshift. This means that in the Robertson–Walker models the initial singularity is not observable.1 In the models that contract from R = at t = − and possess a particle horizon, Eq. (17.13) gives 1 + z = 0 at te = − . Since 1 + z = o /e , in these models the first signal received from each particle has zero wavelength at the observation point, i.e. is infinitely blueshifted. In the Friedmann models with  = 0 the particle horizons do exist. The two kinds of horizon were defined above for observers comoving with matter. However, one can also consider observers moving independently of the matter background. In some cosmological models there exist horizons also for such observers: irrespective of how fast the observer moves towards a given worldline of matter, he/she will never see any event on that worldline if the line is sufficiently far from the observer’s starting point. Rindler’s paper contains several examples of horizons in various R–W models; readers are advised to consult that paper for further information. There exists one more type of horizon: the apparent horizon (see Sections 14.11 and 16.4). In a Universe expanding from a singularity, it is a closed hypersurface at which both the inward- and the outward-going light rays are diverging, i.e. at which the expansion scalar of any bundle of emitted light rays is positive. This notion plays no useful role in the R–W cosmology; it applies mainly to black hole models. Because of the peculiar properties of the R–W models, it is actually easier to interpret an apparent horizon in the more general Lemaître–Tolman model. However, we will calculate its position in the Friedmann models for completeness, as an exercise. The calculation is simpler in the coordinates of (17.3). The tangent vector field to a bundle of null geodesics emanating radially from a sphere is found by transforming (17.11) with use of (17.2). Dropping primes, the result is  √ 1 k = (17.64)  2 1 − kr 2  0 0  R R where = +1 for outward-going and = −1 for inward-going rays. The expansion scalar of this bundle is 1 √ 2 = k  = √ (17.65)  −gk    −g Calculating this and substituting for Rt from (17.32) with the + sign (we consider an expanding Universe) we find that  > 0 is equivalent to √ r 2/R − k + > 0 (17.66) √ 1 − kr 2 1

This is not a universal property of all cosmological models; in Chapter 18 we will see that a typical situation in the Lemaître–Tolman cosmological model is an infinite blueshift for rays emitted from the initial singularity.

282

Relativistic cosmology II: the Robertson–Walker geometry

This is fulfilled for an outward-going bundle ( = +1), and it will be fulfilled also for an inward-going bundle ( = −1) when 2G 2 r  (17.67) c2 This always holds in a vicinity of the Big Bang singularity; this is a region of past-trapped surfaces. Its envelope, where R = 2r 2 , is the past apparent horizon. Note from (17.17) and (17.2) that, in the coordinates we are now using, rR is the source area distance from the singularity at R = 0. Then, by analogy between (17.28) and the Newtonian equation (17.54), note from (17.27) that r 3 is equal to the mass contained within the source area distance rR from the singularity. Thus (17.67) can be written in the equivalent R < 2r 2 =

def

form rG < 2m, where m = Gr 3 /c2 . This is, not accidentally, similar to the condition defining the interior of the horizon in the Schwarzschild solution. The meaning of this will become clearer in the Lemaître–Tolman model; see Section 18.8.

17.8 The inflationary models and the ‘problems’ they solved (The views expressed in this section are A. K.’s. J. P. should not be held responsible for them.) The R–W metrics are oversimplified models of the Universe. When taken literally, they can lead to puzzles or problems, most of which do not exist in the L–T and Szekeres models of Chapters 18 and 19. Two of such ‘problems’ gave rise to a booming field of activity in cosmology – the inflationary models. They are of marginal interest for basic relativity, but gained such prominence that we have to mention them. The two problems are the ‘flatness problem’ and the ‘horizon problem’ (Guth, 1981). In brief, the ‘flatness problem’ is this. With  allowed,1 the density at k = 0 is found ˙ 2 /R2 + . Consider the quantity from (17.27) and (17.28) to be c2 cr = 3R  kR  def = cr − 1 = −    2

(17.68)

where  is defined in (17.32). Since in the ever-expanding models R → as t → ,  will tend to infinity, unless k = 0. To estimate the value of   by today, the parameter  we take the  = 0 Friedmann model,2 so that (17.27) holds. We will calculate how  has changed since the instant when the average density in the Universe was equal  to that in the atomic nucleus, N = 1014 g cm−3 ; the present density is assumed to be  0 /  N = N /0 1/3 = 1015 . 0 ≈ 10−31 g cm−3 . Using (17.27) we obtain  2  0 ≈ 465. This At present cr /0 ≈ 0475 × 10 (see after (17.30)), which means   discrepancy seems large. However, in order that the present value 0 can be so small, at  0 ≈ 465 × 10−14 . Hence, during  N = 10−15  the epoch of nuclear density it had to equal  the first moments of the existence of the Universe the density had to be very close to the 1 2

We include the cosmological constant for later reference, although the original paper (Guth, 1981) assumed  = 0. In the original paper (Guth, 1981), the radiation source with  = 0 and  = 3p was considered, but the conclusion was similar.

17.8 The inflationary models and the ‘problems’ they solved

283

critical density, or else the present discrepancy between these two quantities would be huge.1 Why had the initial conditions of the evolution of the Universe been set up in such a way that it was described by the flat Friedmann Universe with such a high precision? The ‘horizon problem’ needs to be explained first qualitatively; see Fig. 17.7. It is conventionally assumed that the emission process of the cosmic microwave background (CMB) took place instantly, at the last scattering instant (also called the recombination instant), tls ≈ 3 × 105 years after the Big Bang (BB) (Lang, 1999, Vol. II). A light cone with its vertex at the BB encompasses a certain volume at t = tls ; Fig. 17.7 shows two such cones. Particles that are still outside P’s light cone at tls could not have exchanged any interaction with P because the interaction would have had to propagate faster than light. The past light cone of a contemporary observer, with the vertex at O, encompasses at tls a much larger volume than does any BB cone. Yet the radiation received by O from points in the t = tls space has the same temperature, as if the various sources had interacted before, to achieve equilibrium. How is this possible? This is the ‘horizon problem’.

t O

ls

B P

Q

r

Fig. 17.7. The ‘horizon problem’ in a Robertson–Walker Universe – an illustrative sketch in comoving coordinates. The line BB is the Big Bang set, the line ls is the last scattering hypersurface – the time by which the CMB radiation was emitted. O is the observer today. The past light cone of the observer O encompasses a much larger volume at t = tls than the volume inside any single light cone emitted at the Big Bang (two of which are shown). Hence, the different regions we see today had had no chance to come into causal contact prior to the emission of the CMB radiation, yet the temperature of the CMB radiation coming from them is nearly the same. Inflationary models avoid this problem by replacing the part of spacetime prior to tls with a model that expands much faster than any matter-filled R–W model. In effect, inflation makes the light cones at P and Q much wider – encompassing the whole interior of O’s past light cone at t = tls .

1

The inflationary models consider still earlier periods, where the fine-tuning is by several orders of magnitude finer. We want to be conservative and do not go too far from laboratory physics.

284

Relativistic cosmology II: the Robertson–Walker geometry

To formulate the problem in numbers, we have to assume a model of matter for the period prior to tls . After tls we assume dust. It is usually assumed that the Universe prior to tls was radiation dominated, i.e. that the energy-density of radiation was larger than the energy-density contained in the massive particles. Since radiation is supposed to obey the Maxwell equations, and the energy-momentum tensor of a Maxwell field is traceless (see (13.10)), it is assumed that a radiation-dominated matter is a perfect fluid with the property T   = 0. This implies the equation of state  = 3p, and then the equation of motion (17.26) becomes R4 = 0 = constant. Substituting this in (17.24) with  = 0 we obtain an equation for R that is easily integrated with the result ⎧  2 ⎪ 1 ⎪ ⎪ ⎨ 0 /3k − k t − tB −  /3 when k = 0 k 0 (17.69) R= ⎪   ⎪ when k = 0 ⎪ ⎩ 2 0 /3 t − tB  For simplicity, and following Guth (1981), we take k = 0.1 We also take r = 0 for the observer’s position, and tB = 0. The radius of the visible region of the Universe for an observer at time t0 is calculated in the same way as in Eq. (17.63), with tls instead of t = 0. With k = 0, r1  = r1 and the geometric radius of the visible region in the t = tls space is

t0 dt   = 3 tls 2/3 t0 1/3 − tls  0ls = R tls  (17.70) tls Rt Taking t0 = 15 × 109 years for the present age of the Universe and tls = 3 × 105 years (Lang, 1999, Vol. II) we obtain 0ls = 323 × 107 years. The geometric radius of the intersection of the light cone originating at t = tB = 0 with the space t = tls is calculated in a similar way, but with R given by (17.69): rls = R tls 

0

tls

dt = 2tls = 6 × 105 years Rt

(17.71)

The observed region thus has the radius 53.8 times larger, and contains 156 × 105 times as many particles.2 The solution of these two problems, proposed by Guth (1981), was that the equation of state of matter during the early phase of evolution (between 10−34 and 10−32 s after the BB) was such that the Universe expanded exponentially (‘inflated’), so that the radius of a light cone originating at the BB was, at tls , much larger than the radius 0ls of the visible region of the Universe. In Guth’s original paper, the de Sitter metric (8.85) was proposed as the model of the inflation process. This metric can formally be treated as 1 2

The difference with the cases k = 0 is smaller than the uncertainties resulting from statistical errors in determining the astrophysical quantities, and from controversies between different schools in interpreting the observations. Guth (1981) compared the two radii at an earlier time than tls and obtained a much more impressive ratio of particle numbers, 1083 .

17.8 The inflationary models and the ‘problems’ they solved

285

a perfect fluid solution of Einstein’s equations with the equation of state  = −p.1 In later papers, the source was assumed to be a scalar field, i.e. an entity x whose field equation is g    −V/ = 0, where the potential V is chosen so as to give  the desired behaviour. To cause inflation, it is enough that the energy-momentum tensor  u =  /     T =  + pu u − pg   =    /2 − V

p =    /2 + V

(17.72)

has the property p < −/3 (Peebles, 1993). Thus, the two ‘problems’ were solved within the class of R–W models by postulating a new equation of state. They turned out to be problems of choosing a model rather than fundamental problems of cosmology. In effect, they just implied that the matter of the very early Universe must have obeyed an equation of state different from p = 0 and p = /3. It is a mystery why the inflationary idea has become such a huge success with cosmologists. It gave rise to hundreds if not thousands of papers, and the subject cannot be avoided by anyone interested in cosmology. This is so in spite of two circumstances: 1. The two ‘problems’ that the inflationary models were designed to solve had not been perceived as much of a problem before. So much so that Guth (1981) felt compelled to argue at length to convince readers that they were indeed problems. 2. Inflationary models created more problems than they solved. The ‘flatness problem’ is completely transformed if we consider the Lemaître–Tolman (L−T) and Szekeres models (see Chapters 18 and 19). In those models, the curvature index is not a constant, but a function of a spatial variable. If we find that it is unusually close to zero, then this means that we live in a privileged position in space. The ‘horizon problem’ finds a simple solution in the L−T model without recourse to inflation; see Section 18.17. Besides, inflation would have solved this problem if it were able to provide a model in which the Universe is initially inhomogeneous and acquires the uniform temperature of the CMB radiation in the course of its evolution. No such model has been presented. All the inflationary models are homogeneous all the time, in the best case they are anisotropic, of various Bianchi types. A great majority of them has a R–W geometry all the way. So all inflation has done so far in solving the ‘horizon problem’ is to say: these models expand so fast that they might homogenise the CMB radiation! We will not go into details; overviews of the inflationary scenario may be found in textbooks on cosmology (Peebles, 1993; Padmanabhan, 1993). The main virtue of the inflationary idea is the collection of speculations and hypotheses that it inspired (e.g. concerning the formation of structures in the Universe) rather than solid calculated results. 1

Note, however, that the corresponding energy-momentum tensor T = −pg does not define any velocity field. This gave rise to the following question: how are the local directions of flow defined after inflation stops? This was listed by Guth (1981) as one of the problems – created by the idea of inflation – that needed to be solved.

286

Relativistic cosmology II: the Robertson–Walker geometry

Among the problems that the idea of inflation created are these: 1. The so-called ‘graceful exit’ problem – once inflation sets in (its onset being a problem in itself), it cannot end. 2. The cosmological constant problem –  is determined by the value of the scalar field at the end of the inflationary period, and it could be arbitrary. Why is it so close to zero? 3. Inflation overdid the solution of the ‘flatness problem’ – it implies that k must be very close to zero, i.e. that the density of matter in the Universe must be very near the critical one. Since observations of luminous matter cannot honestly account for more than 20% of the critical density (Coles and Ellis, 1997), inflation had to postulate the existence of ‘dark matter’ that makes up for the discrepancy. For reasons that we will not discuss here, this should not be any kind of matter known from laboratory, but matter consisting of hypothetical particles considered in high-energy physics (Peebles, 1993; Padmanabhan, 1993). However, such matter has not been observed directly. 4. Currently, it is assumed that the missing matter is made up for by the cosmological constant (see the next section), and the numbers now favoured by astronomers are: 30% of the total density for ordinary (but not necessarily luminous) matter and 70% for the cosmological constant (Perlmutter et al., 1999). This creates another problem: the cosmological constant does not change with time, while the mass density falls with time by the law  ∝ R−3 . They cannot be so close to each other at all times, which means that we live in a special epoch. This is a problem very much like the ‘flatness problem’. Finally, let us mention a problem that does not seem to bother cosmologists. Inflation is supposed to have taken place between 10−34 and 10−32 s after the BB. Note that, both in the dust era (p = 0 for t ≥ 3 × 105 years) and in the radiation era (p = /3 for t ≤ 3 × 105 years), the matter density obeys  t − tB 2 = constant. Thus, taking 0 = 10−31 g cm−3 for the present density, t0 = 15 × 109 years for the present age of the Universe and 1 year = 3156 × 107 s, we conclude that during the inflation period the density must have been greater than 224 × 1068 g cm−3 . This is far outside the range of laboratory physics and of any astronomical observations. Thus, if we wish to stick with the tradition that physics is an empirical science, inflation cannot be called a physical theory. Some more problems created by inflation were discussed by Rothman and Ellis (1987).

17.9 The value of the cosmological constant Perlmutter and collaborators (1999) used a collection of high-redshift supernovae to find the best-fit cosmological model in the collection that included different values of the present density and of the cosmological constant. The underlying idea was that supernovae of a certain kind, called type Ia, are ‘standard candles’, i.e. that their absolute luminosity at maximum is the same for all of them. Thus, knowing L and measuring O and zO

17.10 The ‘history of the Universe’

287

in (16.115), one can calculate the source area distances rG . (In astronomy, a measure of O , is used, called apparent magnitude, m, and defined by m = −25 log10 O + constant.) Then, (16.117) and (17.40) provide a relation between rG and the H0  q0  parameters. By plotting magnitude against redshift, while knowing the value of H0 , one can determine q0 and thus discern between different evolution laws. This gives, in principle, the possibility to determine q0 if we know all the other parameters with sufficient precision. The procedure used by the Perlmutter team requires advanced knowledge of astronomy, and we cannot go into any of its details in this book. The authors took several disturbances into account, such as extragalactic extinction of light from the supernovae and the possibility of gravitational lenses in the line of sight or evolutionary changes in the supernovae-to-be (called progenitors). The result they obtained is that  = 0 is strongly inconsistent with the measurements. With the Hubble parameter H0 = 63 km s−1 Mpc−1 , the best fit implies  accounting for more than 50% of the observed density. With k = 0, this gives M = 028+005 −004 as the percentage of mass in the form of matter, the remaining 0.72 being the cosmological constant. An additional bonus is the determination of the age of the Universe, t0 = 145 ± 10 × 109 years. This result will undoubtedly be checked by other teams.1 Meanwhile, we can take it with caution – supernova explosions are rare and distant events. It is rather bold to assume that we know enough about the mechanism of the explosion, and about the propagation of light from it to us, to use the brightness measurements for such intricate calculations. However, the quoted result has been welcomed by the astronomical community, and the now-standard model of the Universe is the Friedmann model with k = 0 and −c2  = 072cr . Meanwhile, Celerier (2000) interpreted the same observations in terms of the Lemaître– Tolman model (see Chapter 18). She found that they can be reproduced by an inhomogeneous mass distribution, with no implications for the value of , and  = 0 not being excluded.

17.10 The ‘history of the Universe’ The realisation that the Universe might have a history was coming only gradually to the minds of astronomers and physicists. The Hubble (1929, 1936) discovery of the expansion of the Universe and the realisation that the Friedmann (1922)–Lemaître (1927) solutions of Einstein’s equations account for it set this line of thinking in motion. Since the Universe had been denser in the past, it must have been hotter as well. Some time ago then, it should have been sufficiently hot that all atoms were ionised. When the temperature dropped below the ionisation temperature, radiation had to be emitted. Expansion of the Universe should have cooled the radiation. Assuming that it had a black-body spectrum all the

1

The subject of ‘dark energy’ is relatively new and can be followed only through papers and conference proceedings. An overview of the situation can be found in Klapdor-Kleingrothaus (2001).

288

Relativistic cosmology II: the Robertson–Walker geometry

time, the evolution of temperature can be calculated. The intensity I of the black-body radiation as a function of frequency ! is given by I! =

2h! 3 c2 exp h!/kT − 1



(17.73)

where h and k are the Planck and Boltzmann constants, respectively, and T is the temperature of the radiation. The received frequencies of radiation obey (16.20), so !1 + z = !e = constant along each ray. Consequently, to keep the form of the function I! in (17.73) unchanged, we must have T1 + z = constant. That radiation should still be present in the Universe today. This idea first occurred to Gamow (1948) and collaborators (Alpher and Herman, 1948). The discovery came in 1965: the radiation exists and has the temperature 2.73 K (Dicke et al., 1965; Penzias and Wilson, 1965). The speculation went on. Atomic nuclei are built of protons and neutrons. Of these, only protons are stable. All the known atomic nuclei could, in principle, be built by adding protons and electrons consecutively one by one to the nucleus of hydrogen (the proton). Still farther in the past, the Universe must have been hot enough to crash all heavier nuclei; only protons, neutrons and loose electrons could survive. Could it have been that matter originally consisted only of protons and electrons, and heavier nuclei came into existence through collisions between these? This idea again occurred to Gamow (1948) and Alpher and Herman (1948). Simulations, with use of computers, indicated that something like this was going on, but only the first few nuclei of the Mendeleev table could be created in this way: about 25% of the mass of the Universe would be converted into helium 4 He. Tiny traces of deuterium, helium 3 He, lithium, beryllium and boron could be created, but the falling temperature of the Universe would stop any further synthesis (Wagoner, Fowler and Hoyle, 1967). (Heavier elements are synthesised later, in the stars (Fowler, 1967), but this process is not within the domain of cosmology.) These calculated proportions of nuclides were confirmed by observations (Boesgaard and Steigman, 1985). Thinking along these lines, cosmologists reconstructed the possible sequence of events in the evolution of the Universe. Some of the conclusions have been verified observationally (like the ones mentioned above); some others remain speculations. We will not go into details since they are not within the domain of relativity; they can be found in books on astrophysical cosmology (e.g. Padmanabhan, 1993). Here we give only a short list of the most important events. The leading motive in theoretical cosmology was this: as we proceed backwards in time, approaching the singularity, the density and temperature of matter become arbitrarily high. Thus, whatever processes we know or can think of that should take place at high temperatures, must have taken place in the early Universe. Why the BB explosion occurred and what preceded it are questions that cannot be answered by means of the currently existing physics or mathematics. Thus, they are usually not asked and we take the BB as a given thing. The natural and interesting question is: at precisely what times the consecutive stages of evolution took place. The numbers given in different sources are different. The selection

17.10 The ‘history of the Universe’

289

of numbers and references given below is random and we make no claim to being precise or up to date. Assuming that k = 0 and /cr = 027, −c2 /cr = 073, the values currently favoured by astronomers, the BB explosion took place 145 ± 10 × 109 years ago (Perlmutter et al., 1999). During the first 10−34 s, the Universe had a temperature of about 1027 K and was supposedly described by a ‘Grand Unified Theory’ (GUT) that unites the strong nuclear, weak nuclear and electromagnetic interactions (Lang, 1999, Vol. II). The theory is still in the making. The elementary particles we know today did not necessarily exist then, and matter might have been composed of loose quarks and gluons. Between 10−34 and 10−32 s after the BB, inflation took place (see Section 17.8). No set of observations necessarily requires inflation for its explanation, but inflation is widely believed to be a proven theory.1 At the end of the inflation period, the elementary particles we know today should have come into existence, together with seeds for structure formation. The reasons, mechanism and exact instant of creation of the seeds are still a matter of debate (Lang, 1999, Vol. II). The BB did not have to be spatially homogeneous (see Chapter 18), and the inhomogeneities may have existed in the Universe from the very beginning, but this idea is not popular in the astronomical community. About 1 s after the BB, neutrinos decoupled and should thereafter propagate freely through space, similarly to the CMB photons. During the next few seconds, protons, neutrons, electrons, positrons and photons existed in thermal equilibrium, at temperatures T ≥ 1010 K (Misner, Thorne and Wheeler, 1973). The formation of light atomic nuclei occurred between 2 and 1000 s after the BB (Misner, Thorne and Wheeler, 1973). At the end of this period, the temperature dropped to about 109 K. Later, the Universe continued to be a radiation-dominated plasma, but the radiation mass-density r (which obeyed r R4 = constant, with R ∝ 1/T , as follows from (17.73) and (17.13)) was decreasing faster than the mass-density of massive particles, m (obeying m R3 = constant). About 3 × 105 years after the BB (Lang, 1999, Vol. II), and at temperatures of the order 103 K, r became smaller than m and radiation decoupled from matter, having too little energy to ionise the atoms that had already captured their electrons. It evolved into the CMB radiation of temperature 2.73 K that is observed today. Later, structures like galaxies, galaxy clusters, superclusters and still larger condensations, and voids, must have formed. Even though the process of structure formation should have proceeded by gravitation and should be well within the domain of classical gravitation theory, it is still poorly understood. There exists no quantitative account of the emergence of structures, only a general firm belief that structures came about by gravitational magnification of fluctuations created very early, nobody knows how (see above). The Lemaître–Tolman model offers some interesting possibilities in this respect; 1

Observations confirming the R–W models are sometimes appropriated as confirmations of inflation.

290

Relativistic cosmology II: the Robertson–Walker geometry

see Sections 18.5 and 18.6. There is even no general agreement on what came earlier: whether stars condensed out of galaxies that had been formed before, or galaxies came into being by pulling pre-existing stars together. As this very brief account shows, the only input from relativity to this subject was the idea that the Universe began hot and dense, and then cooled as it expanded. Everything else is thermodynamics and particle physics. The fact that observations confirm some of the results does not uniquely point to the R–W models. Even in the R–W class, observations are not precise enough to define the evolution uniquely, so there is certainly enough room to consider more general models. It is often claimed that the high isotropy of the CMB radiation (with maximal temperature anisotropies of "T/T ≈ 293 × 10−6 at the angular scale of about 09 ; see Hu (2004)) proves that our Universe has an R–W geometry. Such statements are, however, meaningless without a quantitative account of interaction between the CMB radiation and inhomogeneities in matter distribution. Existing estimates (see Section 18.12) show that the interaction is weak, and no temperature anisotropies larger than 10−5 should ever have been expected. The above remarks were meant to convince the reader that, by considering more general (L–T and Szekeres) cosmological models, one does not in any way deny the confirmed successes of the R–W cosmology. The more general models should fill in the finer details that cannot be captured in the R–W geometries, like the structure formation. The R–W models still remain valid as a rough first approximation to a more detailed description. Very unfortunately though, there is a tendency in the astronomical community to treat any departure from the R–W class of geometries as a blasphemy that requires instant punishment.

17.11 Invariant definitions of the Robertson–Walker models It is often difficult to recognise a known metric when it is represented in an unfamiliar coordinate system. Metrics of high symmetry can be disguised in particularly elaborate ways; an example is the Schwarzschild solution represented in the Lemaître–Novikov coordinates. The same applies to the R–W metrics, so we shall list here some invariant criteria by which to recognise them. One invariant criterion, that has already been presented in Chapter 10, is by the symmetry group, but it requires solving the Killing equations and is therefore rather laborious. The following set of properties is a necessary and sufficient condition for a spacetime to be in the R–W class: 1. The metric obeys Einstein’s equations with a perfect fluid source.1 2. The velocity field of the perfect fluid has zero rotation, shear and acceleration. 1

Some authors considered the R–W metrics with nonperfect fluid and/or shearing/rotating/accelerating contributions to the energy-momentum tensor. Those contributions cancel each other and leave no trace in the metric tensor – which means that, from the point of view of the 4-dimensional geometry, they are undetectable. Hence, considering them is in contradiction to the Ockham razor principle.

17.12 Different representations of the R–W metrics

291

The necessity of these properties follows by calculation. The proof of their sufficiency follows from (15.43)–(15.51). Those equations imply that a perfect fluid solution with  = = 0 = u˙  must be conformally flat. All conformally flat perfect fluid solutions were found by Stephani (1967a) (Stephani et al., 2003, Theorem 37.17, p. 601). They have  = = 0, but in general u˙  = 0. Specialising them to the case u˙  = 0 we obtain the R–W models. In this text, we are concerned only with expanding and nonempty R–W models for which  = 0 =  + p, and these inequalities are always tacitly assumed. The R–W model with  = 0 is the Einstein static Universe; the ones with  + p = 0 are the de Sitter vacuum Universes (the Minkowski spacetime is included among them as the limit  = 0; neither is appropriate for describing the observed Universe. Condition 1, that is, the perfect fluid source, is essential. Examples are known (Krasi´nski, 1997) of solutions for which =  = 0 = u˙  , but which are not R–W because the source is not a perfect fluid. There is another invariant definition of the R–W spacetimes, which makes no use of the field equations. The following set of properties is a necessary and sufficient condition for a spacetime to be R–W: 3. The spacetime admits a foliation into spacelike hypersurfaces of constant curvature. 4. The congruence of lines orthogonal to the leaves of the foliation consists of shearfree geodesics. 5. The expansion scalar of the geodesic congruence has its gradient tangent to the geodesics.

17.12 Different representations of the R–W metrics Several representations of the R–W metrics are met in the literature. The forms that appear most often are (17.1), (17.3), (17.5) and (17.7). Another frequently used representation is:    ds2 = dt2 − R2 t dr 2 + f 2 r d 2 + sin2  d2  (17.74) where fr =

⎧ ⎪ ⎪ ⎨sin r r ⎪ ⎪ ⎩sinh r

for k > 0 for k = 0

(17.75)

for k < 0

The three cases of (17.75) can be written in one formula as   1 2 √  2 2 2 2 2 2 2 ds = dt − R t dr + sin  kr d + sin  d  k

(17.76)

The range of r is finite or infinite, depending on the sign of k and on the coordinates used, but this is easy to recognise in each case. Note that in the case k > 0 the coordinates of (17.3) cover only half of the 3-sphere t = constant 0 ≤ r < 1/k1/2  and are unsuitable for considering the geometry in the vicinity of the equator r = k−1/2 .

292

Relativistic cosmology II: the Robertson–Walker geometry

Rather unfamiliar is the form of the R–W metric that results from solutions with two commuting Killing vector fields. The easiest way to find it is to demand that the metric be independent of y and z while the spaces t = constant have constant curvature. Then   ds2 = dt2 − R2 t dx2 + fx 2 dy2 + f 2 xdz2  (17.77) where fx =

⎧ √ ⎪ ⎪ ⎨sin kx x ⎪ ⎪ ⎩sinh√−kx

for k > 0 for k = 0

(17.78)

for k < 0

Yet another form of the R–W metrics follows as a limit of plane symmetric solutions. Then    ds2 = dt2 − R2 t dx2 + e2Cx dy2 + dz2  (17.79) where C is a constant. When C = 0, this is evidently the flat R–W metric; when C = 0, it is the k < 0 R–W metric. The k > 0 R–W metric is incompatible with plane symmetry. The R–W models result in quite unfamiliar form from the Goode–Wainwright (G–W) representation of the Szekeres models, which are discussed in Section 19.8. One of the G–W forms is:    ds2 = dt2 − S 2 W 2 f 2 !z 2 dz2 + e2! dx2 + dy2  (17.80) where W2 = e! =

1  − kf 2 fz  az x2 + y2  + 2bzx + 2czy + dz

(17.81)

and k are arbitrary constants, and St fz az bz cz and dz are arbitrary functions subject to ad − b2 − c2 = /4

(17.82)

The slices t = constant of the metric (17.80)–(17.82) are spaces of constant curvature equal to k/S 2 . The t-coordinate lines are shearfree geodesics with the expansion scalar depending only on t. This is a characteristic property of the R–W spacetimes (see points 3, 4 and 5 in the previous section). The other G–W form is:    ds2 = dt2 − S 2 A2 dz2 + e2! dx2 + dy2  (17.83) where e! =

1

 1+     1  A = e! az 1 − k x2 + y2 + bzx + czy  4 1 k x2 + y2  4

(17.84)

17.13 Exercises

293

St az bz and cz are arbitrary functions and k is an arbitrary constant. This metric has exactly the same properties as (17.80)–(17.82).

17.13 Exercises 1. Verify that the Einstein tensor for the R–W metric is diagonal in all the coordinate representations (17.1), (17.3), (17.5) and (17.7). 2. Prove that a null geodesic sent off radially from any point in an R–W spacetime, i.e. with ˙0 = ˙0 = 0 at the initial point, will remain radial along its whole length. 3. Let t r be any spherically symmetric (possibly inhomogeneous) finite distribution of matter (i.e. t r = 0 for r > r0 , r0 < ). Let A be a point inside this distribution located at r = r1 . Show that the total (Newtonian) gravitational force exerted on the point A by matter outside the sphere r = r1 is zero. 4. Verify that the various forms of the R–W metrics given in Section 17.11 do fulfil the invariant criteria. Note. It is not advisable to try to prove the equivalence of the G–W forms to R–W by explicit coordinate transformations.

18 Relativistic cosmology III: the Lemaître–Tolman geometry

18.1 The comoving–synchronous coordinates The curvature coordinates introduced in Section 14.1 were convenient for investigating the Schwarzschild solution. However, for other purposes other coordinates might be more useful, the comoving coordinates are among them. They can be introduced whenever there exists a timelike vector field u in the spacetime, for example, the 4-velocity of matter. By definition, they are coordinates in which the (contravariant) vector field u   has only the time coordinate, thus u ∝  0 . They exist always – one has to solve the  set of three equations u x  =0 for  = 1 2 3. Then, the transformations preserving ∗











the comoving coordinates are xI = f I xJ  x0 = f 0 xJ x0 + gxJ . If the vector field u has zero rotation, then the comoving coordinates can be chosen so that, in addition, they are synchronous, that is, in these coordinates the metric tensor has no time–space components. Here is the proof that vanishing rotation is a necessary condition.  Suppose that comoving–synchronous coordinates x  exist. Then u = 0  and, on   changing from x  to any other coordinates x , we obtain u = f , where f = x0 . 1 



Because of u u = 1 we have f u =  1/ , and then u˙  = f  u + f u − 2 u u 



g  . But u u g  ≡ 2u u  = 2u f  +  f . From all this, we find  = 0. The proof that  = 0 is also a sufficient condition for the existence of synchronous √ coordinates is somewhat complicated. If  = 0, then also −gw =   u u = 0. def

This can be written as u ∧ du = 0, where u = u dx . This means that there exists a 1-form  such that du =  ∧ u. Then there exist such functions f and that u = df ,  i.e. u = f (Flanders, 1963, Section 7.2). Choosing x0 = f as the time coordinate, we see that it is synchronous. The comoving–synchronous coordinates will be used throughout the remaining part of this chapter.

18.2 The spherically symmetric inhomogeneous models In a spherically symmetric spacetime in which the source in Einstein’s equations is a perfect fluid, rotation is necessarily zero (see Exercise 1). Hence, the comoving–synchronous 294

18.2 The spherically symmetric inhomogeneous models

295

coordinates can be introduced, in which, in consequence of (8.51), the metric has the form1   ds2 = eCtr dt2 − eAtr dr 2 − R2 t r d 2 + sin2  d2  (18.1) and the velocity field is u = e−C/2  0 

(18.2)

Note that R is connected with S, the area of the surface t = constant r = constant, by the Euclidean relation S = 4R2 . Hence, R is called the areal radius. (N.B. this is the source area distance, defined in (16.114), between an observer at an arbitrary location and the centre at R = 0.) The Einstein equations for this metric (in coordinate components), with the cosmological constant taken into account, are  2    Rrr Rr 2 Ar Rr Rt At Rt 1 −A 2 + − − e + + 2 G0 0 = e−C 2 2 R R R R R R

G1 0 G1 1

=  −    Rtr At Rr Rt Cr −A 2 − − = 0 =e R R R   2   Rtt Rt 2 Ct Rt Rr Cr Rr 1 −C −A 2 =e + + 2 − −e + 2 2 R R R R R R = −p − 

2

G

2

=G =

(18.3) (18.4)

(18.5)

3 3

  R 1 −C C R A R 4 tt − 2 t t + 2 t t + 2Att +At 2 − Ct At e 4 R R R   1 R C R A R − e−A 4 rr + 2 r r − 2 r r + 2Crr + Cr 2 − Cr Ar 4 R R R

= −p − 

(18.6)

Equation (18.3), multiplied by R2 Rr , may be rewritten as     1 −C −A 3 2 2 R + e RRt − e RRr + R r −R e−C Rt 2 r + e−C At RRt Rr 3 = R2 Rr 

(18.7)

But, in consequence of (18.4), the second and third terms on the left-hand side sum up to zero, so in fact (18.7) is   1 −C −A 3 2 2 (18.8) R + e RRt − e RRr + R r = R2 Rr  3 1

Several different notations are used in the literature for the components of this metric. We have adopted here a notation that will, we hope, avoid clashes.

296

The Lemaître–Tolman geometry

Multiplying it by R2 Rt , we transform Eq. (18.5) to the equivalent form   1 R + e−C RRt 2 − e−A RRr 2 + R3 t = −pR2 Rt  3 From (18.8) we can now recognise that the quantity   2 1 def c m= R + e−C RRt 2 − e−A RRr 2 + R3 2G 3

(18.9)

(18.10)

has all the properties we expect from mass: assuming R = 0 at r = r0 and integrating from r0 to a current r in the hypersurface of constant t, we obtain mr =  r (18.8) Rr 2 2 4c R Rr  dr  ≡ 0 4c2 u2 du. Then, Eq. (18.9) can be read as the energyr0 conservation equation: the time-derivative of mass equals volume-work. In the derivation of (18.8) and (18.9) we assumed Rr = 0 = Rt . The case Rt = 0 is not interesting for cosmology: it requires, from (18.4), that either Rr = 0, which leads to the Nariai (1950) solution, or At = 0, which, by virtue of (18.3), has constant density. But with Rr = 0, Eqs. (18.3)–(18.6) do admit an interesting solution; see Section 19.4. At the surface of a spherical star, where p = 0, Eq. (18.9) reduces to mt = 0, i.e. the total mass of a star immersed in vacuum is constant. The definition of mass given above (in the case  = 0) was first introduced by Lemaître (1933a), and then re-derived by Podurets (1964), but in the literature it is most often credited to Misner and Sharp (1964). 18.3 The Lemaître–Tolman model In order to solve (18.3)–(18.6), we have to assume an equation of state. A relation of the type  = fp does not seem to be the right one in inhomogeneous models since it implies the entropy per particle to be a universal constant (see the end of Section 15.5). Lacking any other workable idea, the most natural equation of state is p = 0, i.e. evolution by gravitation only. We shall assume this now. From (12.78), with p = 0 the fluid will move along timelike geodesics. Acceleration being equal to zero then implies Cr = 0 in (18.1) (see Exercise 2), and the transformation t = eC/2 dt leads to C = 0 in the new coordinates. Then (18.4) becomes   −A/2 Rr t = 0 (18.11) e The case Rr = 0 has already been set aside for separate consideration; see Section 19.4. With Rr = 0, Eq. (18.11) is integrated with the result eA =

Rr 2  1 + 2Er

(18.12)

where Er is an arbitrary function; for the metric (18.1) to have the right signature it is necessary that E obeys E ≥ −1/2 for all r.1 1

The value E = −1/2 is admissible provided that Rr = 0 at the same location. This is a neck or wormhole – see Section 18.10 and Hellaby and Lake (1985).

18.3 The Lemaître–Tolman model

297

Using C = 0 and (18.12) to eliminate Rr 2 from (18.5), we obtain 2

Rtt Rt 2 2E + 2 − 2 +  = 0 R R R

(18.13)

Since we that Rt =0, we multiply (18.13) by R2 Rt . The resulting equation has  assumed 2 (/t RRt − 2ER + 13 R3 = 0 and the integral Rt 2 = 2Er +

2Mr 1 − R2  R 3

(18.14)

Mr being one more arbitrary function. With  = 0, this equation is formally identical to the Newtonian equation of radial motion in a Coulomb potential. In this Newtonian analogy, c2 Mr/G plays the role of the active gravitational mass within an r = constant shell, and c2 Er/G plays the role of the total energy within the same shell. The solution of (18.14) will contain one more arbitrary function, (tB r), that will appear in the combination (t − tB r). It is called the bang-time function, and in the case  = 0 we will see below that it does indeed define the time coordinate of the Big Bang singularity, which is in general position-dependent. With an arbitrary value of , the Big Bang will not always occur, just as in the Friedmann models. With C = 0 and Eqs. (18.11) and (18.13) fulfilled, Eq. (18.6) becomes an identity, while (18.3) provides the definition of the mass density: 2M 8G = 2 r  c4 R Rr

(18.15)

The mass density /c2 becomes infinite where R = 0 = Mr and where Rr = 0 = Mr . The first of these is the Big Bang, which occurs necessarily whenever  = 0. The second is a shell crossing singularity, where the mass density goes to infinity and changes sign to become negative. At those points, the radial geodesic  distance between the point t0  r0  0  0  and the point t0  r0 + dr 0  0 , equal to grr dr, becomes zero, which means that shells of different values of the r-coordinate coincide. This singularity can be avoided with an appropriate choice of Mr Er and tB r; see Section 18.10. In the Friedmann limit, defined below, the shell crossing coincides with the Big Bang. The final solution of Einstein’s equations is ds2 = dt2 −

  Rr 2 dr 2 − R2 t r d 2 + sin2  d2  1 + 2Er

(18.16)

where Rt r is determined by (18.14). It was first found and interpreted by Lemaître (1933a). Then, more of its properties were discussed by Tolman (1934) and by Bondi (1947). It will be called here the Lemaître–Tolman (L–T) model.1 Many papers have 1

Even though Tolman made it clear that he was discussing Lemaître’s solution, and Bondi cited Tolman, for some reason, over many years, this solution had been known in the literature as the ‘Tolman’ or ‘Tolman–Bondi’ model. It is called here ‘Lemaître–Tolman’ only to avoid confusion with the Friedmann–Lemaître models, otherwise there would be no reason to add anybody’s name to Lemaître’s.

298

The Lemaître–Tolman geometry

been published in which various properties of the L–T model were discussed. The book by Krasi´nski (1997) contains an overview of these, complete until 1994. The mass c2 M/G in (18.14) and (18.15) is the active gravitational mass that generates the gravitational field. It is not equal to c2 N/G – the sum of masses of particles that formed the gravitating body (compare Eqs. (14.124)–(14.126)). Suppose that matter fills a sphere V with the centre at the centre of symmetry of the space, r = r0 , and the surface at r = rS . Then c2 N/G is, from (18.16),    rS /c2  R2 R  r 2 2 √ c N/G = dr (18.17) −g d3 V ≡ 4 /c  V r0 1 + 2Er while the active gravitational mass M is, from (18.15):  rS   c2 M/G = 4 /c2 R2 Rr dr

(18.18)

r0

Depending on the sign of E, M may be larger than N (when E > 0), smaller than N (when E < 0) or equal to it (when E = 0). If M < N , then (N − M) is called the relativistic mass defect – the general-relativistic analogue of the mass defect known from nuclear and elementary particle physics. In a bound system E < 0, part of the energy contained in the component particles had to be shed, and this lost energy is responsible for the mass defect. In the opposite case E > 0, the system is unbound and its excess energy sums up with the energy equivalent to the sum of masses of components. When E = 0, the system is ‘marginally bound’ – no energy has been shed to form it, and there is no excess energy. This interpretation of E was first given by Bondi (1947). With  = 0, the explicit solutions of (18.14) involve elliptic functions. They were discussed by Lemaître (1933a) and Omer (1965). When  = 0, they are as follows: When Er < 0: Rt r = −  − sin  = When Er = 0:

M 1 − cos  2E

−2E3/2 t − tB r  M



9 Rt r = Mr t − tB r2 2

(18.19)

1/3 

(18.20)

When Er > 0: Rt r = sinh  −  =

M cosh  − 1 2E 2E3/2 t − tB r  M

(18.21)

Actually, the conditions for the occurrence of each case are E/M 2/3 < = or > 0, since the conditions of regularity of the spacetime at the centre of symmetry require that E = 0 at M = 0; see Section 18.4.

18.3 The Lemaître–Tolman model

299

The solutions (18.19)–(18.21) have the same algebraic form as the Friedmann solutions (17.33)–(17.35). Indeed, the Friedmann solutions (17.33)–(17.35) follow from (18.19)– (18.21) when M = M0 r 3 

1 E = − kr 2  2

tB = constant

(18.22)

This limit is coordinate-dependent. We will show that the invariant condition is r = 0. In each interval of r in which Mr does not change sign, Mr can be used as the independent variable instead of r, since Eqs. (18.15) and (18.16) are covariant under the coordinate transformations r = fr  . Using M as the radial coordinate, we rewrite (18.15):  M 6 6 3 3  M  dM (18.23) ⇐⇒ R − R = 0  R3  M M0 M   Then, the condition of spatial homogeneity is M = 0, i.e. R3 MM = 0. Working it out in detail, one finds that this is equivalent to  =

E/M 2/3 = constant

tB = constant

(18.24)

and these two equations define the Friedmann limit invariantly (see Exercise 3). The   functions E/M 2/3 M and tBM generate, respectively, the increasing and the decreasing perturbation of the background Friedmann model (see Silk (1977) and Section 18.19). The function Er has one more interpretation. In the subspace t = constant of (18.16), R depends only on r, so it can be used as the radial coordinate. Taking the orthonormal tetrad √ defined by the 3-metric of that subspace e1 = dR/ 1 + 2E e2 = R d e3 = R sin  d, we find the tetrad components of the 3-dimensional Riemann tensor to be R1212 = −

ER = R1313  R

R2323 = −

2E  R2

(18.25)

Thus, with E = 0, every space t = constant is flat. If E/R2 = constant, then the curvature is constant and its sign is the sign of −E. Consequently, (−E) is a measure of the curvature of the subspaces t = constant. Unlike in the Friedmann models, that curvature is local – it depends on r, and in particular it may be positive in one neighbourhood of the space, but negative elsewhere. This shows that the distinction between the R–W models of different values of k is a peculiarity of the R–W class, and not a property of the physical Universe – the same spacetime can be approximately like the k > 0 Friedmann model in one neighbourhood and like the k < 0 Friedmann model in another. Thus, Eqs. (18.19)–(18.21) do not necessarily describe different cosmological models – they can hold in different regions of the same spacetime. Equation (18.15) implies that, with Mr = 0, the L–T model becomes vacuum. Being spherically symmetric, when  = 0 = Mr it must coincide with the Schwarzschild solution or its extension through the event horizon – and indeed it does, as shown in Section 14.12 (Eqs. (14.116)–(14.117) and Exercise 10 in Chapter 14). See there for a discussion.

300

The Lemaître–Tolman geometry

Other coordinate representations of the L–T model are rarely used. Gautreau (1984) used a hybrid of the comoving and curvature coordinates; see Section 18.7. The proper curvature coordinates are rather useless for this model (see Exercise 4) – in them, the simple statements Mt = Et = 0 become complicated differential equations. Another example: Stoeger, Ellis and Nel (1992) tested their observational cosmology programme on the L–T model. The basis of the programme is coordinates connected with the observer’s past null cone. Transforming the L–T solution to such coordinates requires the integration of the equations of null geodesics, which proved to be an impossible task. Therefore, the authors re-derived the model from the Einstein equations using the observational coordinates from the beginning. The L–T metric in these coordinates is (in the original notation):     (18.26) ds2 = A2  −dw2 + 2 dw dy + C 2 w y d 2 + sin2  d2  def

where  = w − y A is a function related to the observed redshift z by A = A0 /1 + z A0 = constant and C is determined by 2 0 y C C (18.27) = AWy =A + W 2 y − 1 y  C 2 Wy and 0 y being arbitrary  2  functions; W is the analogue of (1 + 2E). The matterdensity is  = 0 y/ AC , and 0 y is one more arbitrary function. The authors explained how the functions are related to observable quantities, but the connection is not simple, and readers are advised to refer to the original paper. The function zy w=const can in principle be read out from observations, but in practice the procedure would require cosmological parallax distances to be measured and this is unrealistic with the present-day technology. For comparison, the R–W metric in the observational coordinates is

  (18.28) ds2 = R2  dw2 − 2 dw dy − k−2 sin2 ky d 2 + sin2  d2 

18.4 Conditions of regularity at the centre We found that the mass density /c2 becomes infinite at those locations where R = 0 = Mr . Thus, not the whole set R = 0 is a singularity. Part of this set is the centre of symmetry, and we will now formulate the conditions that the arbitrary functions in the L–T model have to obey in order that the centre of symmetry remains nonsingular.1 Let r = rc be the radial coordinate of the centre of symmetry, where Rt rc  = 0 for def

all t > tB rc , and let t rc /c2 = t rc  = t < . Assuming that t r is not only finite at r = rc , but also continuous in a neighbourhood of r = rc , t < , implies that Mrc  = 0 1

(18.29)

One could consider models with a permanently existing singularity at the centre of symmetry, but they do not seem to be relevant for astrophysics.

18.5 Formation of voids in the Universe

301

Applying the de l’Hôpital rule and using (18.23), we then find 1/3  1/3 1/3     R R3 6 = lim R3 M =  lim 1/3 = lim r→rc M r→rc M r→rc t rc  Thus R must behave in the neighbourhood of r = rc as R = tM

1/3

+ O1/3 M



=

6 

(18.30)

1/3 

(18.31)

where the symbols Oa M will denote quantities with the property lim

M→0

Oa M = 0 Ma

(18.32)

Thus, if t rc  = 0, then limr→rc R/M 1/3  = . Note (from (18.20)) that (18.31) is always fulfilled when E = 0. For the other two models, from (18.19) and (18.21), Eq. (18.31) implies that  2/3 for E < 0 − M2E 1 − cos  (18.33)

t + O0 M = M 2/3 cosh  − 1 for E > 0 2E Thus, in order to allow for a well-defined value of  at r = rc (which is necessary for the density to have a well-defined value at the centre at all times), E must behave in the neighbourhood of the centre as E = −CM 2/3 + O2/3 M

C = 1 − cos t rc 

(18.34)

Finally, from (18.20) and (18.21), we see that tB rc  must have a finite value, which can be formally written as tB =  + O0 M

(18.35)

Equations (18.29)–(18.35) will be assumed from now on.

18.5 Formation of voids in the Universe Voids are large (approximately 60 Mpc in radius) volumes in the intergalactic space with a very low matter-density. Their observational discovery at the end of the 1970s (Gregory and Thompson, 1978) was a surprise because it contradicted the universal belief in the cosmological principle. In fact, the first papers indicating that voids should be ubiquitous were published in the early 1930s, but had not been understood properly. The first such indication was given by Tolman (1934) and Sen (1934). Tolman’s main result was the proof that the Einstein and Friedmann models are unstable against the growth of inhomogeneities. This is derived as follows. Let the initial conditions at t = t1 be chosen so that R = RLT t1  r in the L–T model is the same function as rR = rRF t1  in the Friedmann model and RLTt t1  r = rRFt t1 . This does not uniquely determine the evolution of the L–T model, since the radial coordinate can be chosen arbitrarily.

302

The Lemaître–Tolman geometry

(In fact, the condition RLT t1  r = rRF t1  defines the relation between the coordinate systems.) Hence, Rtt can still be chosen at will, so we can assume that the densities at t1 are different. From the equations assumed it follows then that Rtr /Rr  t1  LT = Rt /R t1  F . Since Rt is a measure of the velocity of expansion, the above implies a perturbation of the initial density in the Friedmann model, with unperturbed initial velocity. From (18.15) we find 2



 Rt 2 Rttr Rtr 2 Rtt t1  = −2 t1   ln  + +2 2 − (18.36) t2 R R Rr Rr 2 LT LT Using (18.14) to find Rtt and Rttr and then using (18.15), we simplify (18.36) to 2



 Rt 2 Rtr 2 1 t1  = t1   ln   +  + 2 2 + (18.37) t2 2 R Rr 2 LT LT A similar equation holds for the Friedmann model:



2 Rt 2  1 t   ln  t1  =  +  + 3 2 t2 2 R F 1 F

(18.38)

Subtracting (18.38) from (18.37) and using the assumptions, we find: 2 1 ln LT − ln F  =  LT − F   t2 2

(18.39)

Thus, wherever the density of the L–T model is greater or smaller than the density of the corresponding Friedmann model, the difference will be increasing in time. This means that an L–T model with initial condensations or voids will be evolving away from the background Friedmann model. This was as close as possible at that time to predicting that the Friedmann models are unstable against the formation of condensations and voids. This is how Tolman himself formulated the prediction: ‘   at those values of r where the density in the distorted model is different from that in the Friedmann model, there is at least an initial tendency for the differences to be emphasised    in cases where condensation is taking place    the discrepancies will continue until we reach a singular state involving infinite density or reach a breakdown in the simplified equations.’ Sen carried out a complementary study of stability of the Einstein and Friedmann models with respect to the L–T perturbation – he assumed the initial density to be unperturbed, with the velocity distribution being non-Friedmannian at the initial time. By a similar method to Tolman’s, he concluded explicitly that ‘the models are unstable for initial rarefaction’. The book by Krasi´nski (1997) contains a complete overview of studies of void formation done on the basis of the L–T model until 1994. They were mostly motivated by astronomical observations and used various shapes of the arbitrary functions to investigate

18.6 Formation of other structures in the Universe

303

observable effects. The most complete study (Maeda, Sasaki and Sato, 1983; Maeda and Sato, 1983; Sato and Maeda, 1983), extensively summarised by Sato (1984), considered the long-term evolution of voids. A new approach was proposed by Krasi´nski and Hellaby (2002, 2004a, 2005), which will be presented in the next section.

18.6 Formation of other structures in the Universe Formation of galaxies (then called ‘nebulae’) was first considered by Lemaître (1933b). He showed that the initial mass distribution may be set up so that a region of comoving size r = r0 around the centre will recollapse while the region r > r0 will keep expanding forever. In this situation, the curvature of the space is positive everywhere and the expansion of the outer region is caused by the cosmological repulsion. Bonnor’s (1956) model was a Friedmann dust tube around the centre of symmetry, surrounded by an L–T transition zone, and that in turn surrounded by another Friedmann dust region so that, at any t = t0 = constant, the density in the outer region is different from that in the inner region. The boundaries of the Friedmann regions were assumed to be comoving. If both Friedmann regions have positive spatial curvature and the density in the inner region is higher than that in the outer region, then the inner region will start to recollapse earlier than the background and will form a condensation. Bonnor assumed that the condensation has the mass of a typical galaxy, that is, it contains N  3 × 1067 nucleons, and that it formed at ti  1000 years after the Big Bang. Then the following problem arose: if such a condensation formed as a statistical fluctuation in a homogeneous background, then the initial density contrast is / = c − b /b  N −1/2  10−34 , where c is the density in the condensation and b is the background density. However, in order to develop into a galaxy of typical density, the initial perturbation at ti would have to be of the order /  10−5 . On the other hand, if a perturbation of the order of 10−5 is to arise as a statistical fluctuation, then it can involve only 1010 particles. If the outer region has negative curvature while the inner region has positive curvature, then the initial perturbation has to be about 10 times larger than in the preceding case. If both Friedmann regions have negative curvature, a galaxy cannot form at all. The cosmological constant does not help in a model that begins from a Big Bang. Hence, two possibilities are left: either  = 0 and the Universe begins as an instability in the Einstein Universe in the asymptotic past (then there is an arbitrary amount of time available for the statistical fluctuations to grow) or there exists a mechanism for producing large perturbations. The current thinking is that initial fluctuations of density were generated by quantum fluctuations of the scalar field that drives the inflation and indeed are of the order 10−5 (Padmanabhan, 1996). However, one of the results of Krasi´nski and Hellaby (2004a) is that density fluctuations alone cannot be responsible for the generation of structures: the velocity distribution at the initial time must be taken into account. In particular, an initial condensation can evolve into a void (Mustapha and Hellaby, 2001).

304

The Lemaître–Tolman geometry

The book by Krasi´nski (1997) contains an overview of other discussions of structure formation in the L–T model. We shall present here a more recent approach (Krasi´nski and Hellaby, 2002, 2004, 2005).

18.6.1 Density to density evolution The mass M will be used as the radial coordinate. We specify the density distributions at the instants t = ti  i = 1 2:

i M = ti  M ≡ ti  M/c2 

(18.40)

and calculate the corresponding functions Rti  M from Eq. (18.23). Throughout the whole consideration we assume that Rt t1  M > 0, i.e. that matter is expanding at the initial instant. This assumption is dictated by the intended application of the results (structure formation in the Universe), but a similar investigation could be done for collapsing matter. For definiteness, we also assume t2 > t1 throughout. The cases E > 0 and E < 0 have to be considered separately.1 For E > 0 we write out the evolution equations (18.21) at t1 and t2 : Ri M = Rti  M =

M cosh i − 1 2E

2E3/2 ti − tB M  sinh i − i = M

(18.41)

and R2 M > R1 M in consequence of t2  M < t1  M. Solving for tB at t1 we obtain tB = t1 −

 M  2 − 1 − arccosh1 + 2ER /M  1 + 2ER /M 1 1 2E3/2

(18.42)

We substitute this in (18.41) at t2 and obtain 

1 + 2ER2 /M2 − 1 −arcosh1 + 2ER2 /M  − 1 + 2ER1 /M2 − 1 + arcosh1 + 2ER1 /M =

2E3/2 t2 − t1   M

(18.43)

This equation defines EM, and, given EM, the previous one defines tB M. These two functions then define the L–T evolution from t1  M to t2  M. In fact, this is already a solution of our problem, but we have to answer the following question: does

1

The case E = 0 is highly exceptional because then just one of the distributions i t M uniquely determines an L–T model. Choosing the other i t M, it is practically impossible to hit upon such a pair that is connected by the E = 0 evolution. However, the E = 0 model will appear as an intermediate limiting case.

18.6 Formation of other structures in the Universe

305

Eq. (18.43) have any solutions, and, if so, is the solution unique? For ease of calculation, let us denote def

def

ai = Ri /M 1/3  i = 1 2 x = 2E/M 2/3  def  H x = 1 + a2 x2 − 1 − arcosh1 + a2 x  − 1 + a1 x2 − 1 + arcosh1 + a1 x

(18.44)

− t2 − t1 x3/2  Our problem is this: for what values of the parameters a2 > a1 and t2 > t1 does the equation H x = 0 have a solution x = 0?1 From the properties of the function H x (Krasi´nski and Hellaby, 2002, and Exercise 5) it follows that (18.44) has a solution if and only if √  2  3/2 t2 − t1 < (18.45) a2 − a1 3/2  3 and then the solution is unique. This inequality says that the expansion between t1 and t2 must have been faster than in the E = 0 model. The result above shows only the existence of a solution for a given value of M. Some initial conditions may lead to shell crossings, and these are not excluded by (18.45) – one must check for their presence separately. But the criteria for the occurrence of shell crossings are known – see Section 18.10. If they occur before t1 , then they are no problem – the L–T model cannot describe those epochs anyway. For E < 0, the inverse of the function cos in the range 0  is different from that in the range  2. Consequently, the L–T model evolving between two given states must be considered separately for the case when the final state is still expanding ( ∈ 0  in (18.19)) and for the case when the final state is already recollapsing  ∈  2. For the still-expanding final state, the variables and the function whose zero has to be found are the ai from (18.44) and def

x = −2E/M 2/3 

 def X x = arccos1 − a2 x − 1 − 1 − a2 x2  − arccos1 − a1 x + 1 − 1 − a1 x2 − t2 − t1 x3/2 

(18.46)

The reasoning is analogous to that for (18.44), but this time the arguments of arccos must have absolute values not greater than 1. This implies x ≤ 2/ai for both i, so, since a 2 > a1 , 0 ≤ x ≤ 2/a2  1

(18.47)

x = 0 is a solution of H x = 0, but it corresponds to E = 0. In fact, we are looking for a zero of the function H x/x3/2 .

306

The Lemaître–Tolman geometry

The two square roots in (18.46) will then also exist. Equation (18.47) is equivalent to the requirement that Rt 2 (in (18.14) with  = 0) is non-negative at both t1 and t2 . Again, elementary reasoning (Krasi´nski and Hellaby, 2002) shows that X x = 0 has a nonzero solution if and only if √  2  3/2 a2 − a1 3/2 < t2 − t1 ≤ 3    a2 /23/2  − arccos1 − 2a1 /a2  + 2 a1 /a2 − a1 /a2 2  (18.48) With (18.48) fulfilled, the solution is unique. The first inequality means that the model must have expanded between t1 and t2 slower than the E = 0 model; the second one means that the final state is still earlier than the instant of maximal expansion. The condition E ≥ −1/2 does not follow from (18.48) and has to be verified separately. For the recollapsing final state, the variables are defined as in (18.48), but the function whose zeros are sought is different:  def C x =  + arccos−1 + a2 x + 1 − 1 − a2 x2  − arccos1 − a1 x + 1 − 1 − a1 x2 − t2 − t1 x3/2  (18.49) The solution of C x = 0 exists if and only if    t2 − t1 ≥ a2 /23/2  − arccos1 − 2a1 /a2  + 2 a1 /a2 − a1 /a2 2 

(18.50)

and then it is unique (Krasi´nski and Hellaby, 2002). The results obtained above can be summarised in the following: Theorem 18.1 Given any two instants t1 and t2 > t1 , and any two spherically symmetric density profiles 0 < 2 M < 1 M defined over the same range of M, an L–T model can be found that evolves from 1 to 2 in time (t2 − t1 ). The inequalities (18.45), (18.48) and (18.50) will tell which class of L–T evolution applies at each value of M. The possibilities of shell crossings or excessively negative energies are not excluded, and must be separately checked for.

18.6.2 Velocity to density evolution A measure of velocity of expansion is Rt t M. A more convenient measure is Rt t M/M 1/3 because it becomes constant in the Friedmann limit, and so is also a measure of inhomogeneity of the spacetime. Suppose now that the initial state of the Universe is specified by b1 M = Rt t1  M/M 1/3 

(18.51)

while the final state is specified, as before, by a density distribution t2  M. Again, the two signs of E must be considered separately.

18.6 Formation of other structures in the Universe

307

For E > 0, with the variables defined as in (18.44) and (18.51), the equation whose solutions are sought is H x = 0, where  2  2  b1 + x def 2 H x = 1 + a2 x − 1 − −1 b1 2 − x   2 b1 + x −arcosh1 + a2 x + arcosh − x3/2 t2 − t1   (18.52) b1 2 − x Now the necessary and sufficient condition for the existence of solutions of (18.52) consists of two inequalities (Krasi´nski and Hellaby, 2004a): √ 2 3/2 4 −  2/a2 < b1 2  (18.53) a t2 − t1 < 3 2 3b1 3 The second one is a necessary condition for the existence of a t2 > t1 obeying the first, and is equivalent to R2 > R1 . It came in place of t2  M < t1  M that we assumed when considering a density to density evolution. With both inequalities fulfilled, the solution of H x = 0 is unique. Equation (18.53) is equivalent to (18.45). For E < 0, as before, the cases when the final state is still expanding and recollapsing have to be considered separately. When the final state is still expanding, the function whose zeros are to be found is  2   2 b1 − x def x = 1 − − 1 − 1 − a2 x2 X b1 2 + x   2 b1 − x − x3/2 t2 − t1   + arccos 1 − a2 x − arccos (18.54) b1 2 + x and the equation X x = 0 has a solution if and only if √ 2 3/2 4 < t2 − t1 ≤ a2 − 3 3b1 3     b1 2a2 a2 b1 2 /2 − 1 3/2 a2 /2 − arccos  + a2 b1 2 /2 + 1 a2 b1 2 /2 + 1

(18.55)

This is equivalent to (18.48). With the inequalities fulfilled, the solution of the corresponding equation is unique (Krasi´nski and Hellaby, 2004a). When the final state is recollapsing, the appropriate function is  2   2 b1 − x def + 1 − 1 − a2 x2 +  C x = 1 − b1 2 + x  2  b1 − x − arccos + arccos −1 + a2 x − x3/2 t2 − t1   (18.56) b1 2 + x

308

The Lemaître–Tolman geometry

and the condition for the existence of the appropriate evolution is     b1 2a2 a2 b1 2 /2 − 1 3/2 − arccos  + t2 − t1 ≥ a2 /2 a2 b1 2 /2 + 1 a2 b1 2 /2 + 1

(18.57)

All derivations can be found in Krasi´nski and Hellaby (2004a). Using the methods of this section, examples of evolution of various initial configurations to galaxy clusters, voids and galaxies with central black holes were found (Krasi´nski and Hellaby, 2002, 2004, 2005). The approach presented in this section has not been entirely successful so far. If the distributions of velocity at t1 and of density at t2 are assumed, then the density distribution at t1 is determined, and has to obey the observational constraints. It is sensitive to the shape of the velocity profile at t1 , and the optimal shape has not been identified yet.

18.6.3 Velocity to velocity evolution The given quantities are now the velocity distributions at t1 and t2 : bi M = Rt ti  M/M 1/3 

i = 1 2

(18.58)

the definition of xx = ±2E/M 2/3  being in each case the same as in the previous cases. We assume that t2 > t1 and that the model is expanding at t1 , thus b1 > 0. This way of specifying the data is probably not useful for astrophysics, but is included here for academic completeness. For E > 0, the function whose zeros are to be found is   2 2  2  2 b2 + x b1 + x def H x = − 1 − −1 b22 − x b12 − x  2   2  b2 + x b1 + x −arcosh + arcosh − x3/2 t2 − t1   (18.59) b2 2 − x b1 2 − x The necessary and sufficient condition for the existence of an E > 0 evolution between the two states is the set of two inequalities   4 1 1  (18.60) t2 − t1 > − 0 < b2 < b1  3 b2 3 b1 3 The second inequality becomes more intelligible when it is rewritten as b2 3 >

b1 3  1 + 43 b1 3 t2 − t1 

(18.61)

which means that the expansion at t2 is faster than it would be in the E = 0 model (for which b3 = 4/3t − tB , giving an equality in (18.61)).

18.7 The influence of cosmic expansion on planetary orbits

309

For an E < 0 evolution between t1 and t2 with the final state still expanding, the function  is   2 2  2  2 − x b b −x def + 1 − 12 X x = − 1 − 2 2 b2 + x b1 + x   2   2 b −x b −x − arccos 1 2 − x3/2 t2 − t1   + arccos 2 2 (18.62) b2 + x b1 + x A solution of X x = 0 exists if and only if t2 − t1 <

0 < b 2 < b1 

4 3



 1 1  − b 2 3 b1 3

(18.63)

which now implies that the expansion between t1 and t2 must have been slower than it would be in an E = 0 model. These two cases together exhaust all possibilities for b2 > 0. When the final state is already recollapsing, we have b2 < 0. Then the evolution exists for any values of b1 > 0 and b2 < 0. The function  is here   2 2  2  − x b x − b2 2 def − 1− + C x = 1 − 1 2 b1 + x x + b2 2     2 x − b2 2 b1 − x + arccos − x3/2 t2 − t1   − arccos (18.64) x + b2 2 b1 2 + x and with t2 > t1 the equation C x = 0 always has an x > 0 solution.

18.7 The influence of cosmic expansion on planetary orbits The first formally correct study of the problem of expansion of orbits was carried out by Einstein and Straus (1945).1 They showed that the Schwarzschild solution can be matched to any Friedmann model. This implies that the planetary orbits are in this configuration not influenced by the expansion of the Universe. The Schwarzschild mass m is related to the Friedmann mass integral  from (17.27) by m=

c2

Gr0 3



1+

3 1 kr0 2 4

def

=  r0  

(18.65)

vacuole in the coordinates of (17.1). The where r0 is the radius of the Schwarzschild r geodesic radius of the vacuole, Rt 0 0 r1 + 41 kr 2 −1 dr, expands together with the Universe. This relation was derived by Einstein and Straus from the Einstein equations in a rather outlandish notation. It can be derived in a simple way from the Lemaître–Novikov 1

Some papers were published by other authors earlier, but they were based on questionable assumptions (Krasi´nski, 1997).

310

The Lemaître–Tolman geometry

representation of the Schwarzschild solution, Eqs. (14.116)–(14.117), and from the Friedmann limit of Eqs. (18.16) and (18.14) (with  = 0). Assuming that the coordinates on both sides of the hypersurface r = rb are the same, we conclude, from the matching conditions of Section 12.17, that the Rt rb  in (14.116) must be the same (as a function of t) as the Rt rb  in (18.16). Consequently, Rt t rb  must be the same in both metrics, and then (18.14) implies that Erb  is the same on both sides, and m = M rb , where Mrb  is the L–T mass contained within the r = rb hypersurface of (18.16). So far we have considered the matching conditions between the Schwarzschild metric and a general L–T model. Now we take the Friedmann limit of (18.14) and (18.16). Hence,   by (18.22), Mrb  = G/c2 rb 3 , while the Friedmann limit of the metric (18.16) is 

  2  drF 2 2 2 2 + rF d + sin  d ds = dt − RF t  1 − krF 2 2

2

2

(18.66)

and the transformation leading from this to the coordinates of (17.1) is (17.2). Hence, denoting by r0 the value of r corresponding to rF = rb , we obtain (18.65). This says that the Schwarzschild mass at the centre of symmetry must be equal to the Friedmann mass removed from within the sphere r = rb . However, contrary to superficial appearance, Eq. (18.65) is not invariant under coordinate transformations in the Friedmann metric – because the constant  is not a scalar, but can be scaled by coordinate transformations. Einstein and Straus’ result was for many years taken as the general implication of relativity. However, (18.65) need not be fulfilled if the Einstein–Straus configuration is taken only at a single moment t = t0 as an initial condition for an L–T model. Then, the results of other papers (Sato, 1984 and papers cited therein; Lake and Pim, 1985) imply that if m < r0 , then the boundary of the vacuole will expand faster than the Friedmann background, whereas if m > r0 , then initial conditions may be set up so that the vacuole will start to collapse. This indicates that the Einstein–Straus configuration is unstable against perturbations of the condition (18.65); that is, it is an exceptional situation. The same problem was studied by quite a different method by Gautreau (1984). He based his study on the subcase E = 0 of the L–T model that he derived in a hybrid of comoving and curvature coordinates, in which the metric is non-diagonal. In these coordinates, R is the radial coordinate defined by the curvature radius of the orbits of the symmetry group. These orbits do not participate in the cosmic expansion and therefore R of any single orbit can be used as a standard of length. In Gautreau’s coordinates, the E = 0 L–T solution takes the form: 2    1 1 dR − Z + 2 − R2 dt − R2 d 2 + sin2  d2  ds2 = A dt2 − A 3

(18.67)

where def

A = 1−

2 + Z 1 + R2  R 3

(18.68)

18.8 * Apparent horizons in the L–T model

311

The function Z is given by an equation equivalent to (18.213), derived in Exercise 4:  1/2 Z 1 1/2 Z 3 + Z + 2 + R = 0 (18.69) R t 3 R and  = constant is the mass of the star. This is the L–T model with E = 0 and M =  + Z/2. The metric (18.67) applies only outside the star, for R ≥ Rb = constant > 0; the metric for the inside of the star is not considered. By investigating the equations of timelike geodesics in (18.67), Gautreau showed that circular orbits do not exist. This is in fact a purely Newtonian phenomenon: in the model (18.67)–(18.69), the smoothed-out cosmic matter-density extends throughout the planetary system, and, as a result of cosmic expansion, matter streams out of every sphere R = constant. Hence, each planet moves under the influence of a gravitational force that is decreasing with time, so the orbit must spiral out. Gautreau derived the Newtonian formula for the rate of change of orbital radius, dR/dt = 8R4 H /2, where R is the orbital radius, H is the Hubble parameter and

is the mean cosmic density of matter. The effect is thus greater for orbits of greater radius; for Saturn it is dR/dtS = 6 × 10−18 m per year. This is obviously unmeasurable (one proton diameter per 1000 years!). For a star at the edge of the Andromeda galaxy the effect would be dR/dtgal = 1100 km per year. From the ‘practical’ point of view Gautreau’s result thus implies that planetary orbits do not react to the expansion of the Universe. However, it is important to know that in principle the effect is nonzero. In the Einstein– Straus approach, it was exactly zero. As explained above, the model of Einstein and Straus is unstable against the perturbations of (18.65), and hence is less realistic than Gautreau’s.

18.8 * Apparent horizons in the L–T model As defined in Section 16.4, an apparent horizon is the outer envelope of a region of closed trapped surfaces, while a closed trapped surface St is one from which it is impossible to send a diverging bundle of light rays – because both the outward-directed and the inward-directed bundles immediately converge: k  ≤ 0 at St . Since the L–T model is spherically symmetric, the apparent horizon must be a sphere around the centre of symmetry. Hence, it suffices to consider families of null geodesics sent orthogonally from a surface r = constant. We must identify the surface at which k  becomes zero for all future-directed null geodesics. For this, we shall use the method of Szekeres (1975b). Since the surface we are looking for is a sphere, its normal rays will From (18.16), the tangent vectors to radial null curves obey k0 − √ be radial. 1 Rr / 1 + 2Ek = 0, k2 = k3 = 0, where = +1 for outward-directed and = −1 for inward-directed curves. Because of spherical symmetry, these curves must be geodesics. Now consider a bundle of null geodesics originating at a surface Str given by t = ts  r = rs . At these constant values of t and r, the affine parameter on the null geodesics may be chosen so that k0 = √

Rr 1 + 2E



k1 =

on Str 

(18.70)

312

The Lemaître–Tolman geometry

The divergence of this field on Str is then    k k! k    = k   +

!     Er R R R R Rtr + rr + 2 r  = k 0 t + k 1  r + √ r +2 t + − R 1 + 2E Rr R 1 + 2E Rr

(18.71)

Since k is null, geodesic and affinely parametrised, we have k k = 0 and k ! k! = 0. Differentiating the first equation by t, and taking the second one with the index  = 1, we obtain R R k0 t − √ tr − √ r k1 t = 0 1 + 2E 1 + 2E √

Rr 1 + 2E

k 1 t + k 1 r + 2 √

Rtr 1 + 2E

+

Er Rrr − = 0 Rr 1 + 2E

(18.72) (18.73)

We add (18.73) multiplied by to (18.72), and thereby eliminate k1 t . The resulting equation is used to eliminate k0 t +k1 r from (18.71), and the result is   R R 2 r √ t + = 0 (18.74) R 1 + 2E One solution of this equation is Rr = 0, but this is either a shell crossing singularity or a neck. What happens there will be investigated in Section 18.10. The generic solution of (18.74) is R =−  (18.75) √ t 1 + 2E For outward-directed geodesics = +1, so the solution of (18.75) will exist only in collapsing models, in which Rt < 0. For inward-directed geodesics = −1, and the solution of (18.75) will exist only in expanding models. In each case, Rt must have the sign of − . Using the evolution equation (18.14), we have in (18.75) √ 2M 1 − R2 = 1 + 2E 2E + (18.76) R 3 With  = 0, the solution of this is R = 2M

(18.77)

In the Schwarzschild limit, M = constant, the apparent horizon becomes identical to the event horizon. In a general L–T spacetime, the r = constant shell obeying (18.77) is just falling into its own Schwarzschild horizon. Using the result of Exercise 2 in Chapter 16, the formula for the apparent horizon can be derived in an equivalent way. A bundle of light rays sent outwards from a spherical surface forms, at any time, a spherical light front. The apparent horizon is where the surface area of this front starts decreasing. Since this surface area is proportional to R2 ,

18.8 * Apparent horizons in the L–T model

313

it suffices to identify the location where Rt r starts decreasing as we go along the null geodesics (Krasi´nski and Hellaby, 2004b). The evolution equation (18.14) with  = 0 can be written as 2M ˙ =" + 2E (18.78) R R where " = +1 for expanding models and " = −1 for collapsing models. The radial null geodesics, from (18.16), are given by  jR dt  =√ r  (18.79)  dr n 1 + 2E where j = +1 for outgoing rays and j = −1 for incoming rays, whose solution we write as t = tn r. Along this ray we have Rn = Rtn  r   √  2M/R + 2E dt  ˙ Rn r = R  + Rr = "j √ + 1 Rr  dr n 1 + 2E

(18.80)

The apparent horizon (AH) is the hypersurface in spacetime where R stops increasing along the rays: √ 2M Rn  r = 0 ⇒ R = 2M (18.81) + 2E = −"j 1 + 2E ⇒ "j = −1 R Inside the future apparent horizon, all light rays inevitably proceed towards the final singularity (Rn r < 0 necessarily). The existence of such a region was predicted by Bondi (1947) and later by Barnes (1970). Note that, in every L–T model that collapses, the dust matter must enter the future apparent horizon before it hits the final singularity at R = 0, and in every L–T model that expands the dust matter remains inside the past apparent horizon for a while after leaving the Big Bang. We now wish to establish whether the apparent horizon is timelike, spacelike or null. For this purpose, we find dt/dr along the AH by differentiating (18.81): ˙ dt + Rr dr = 2Mr dr R The result is  tAH

 2M −Rr dt  2Mr −Rr  = √ r = =  ˙ dr AH " 2M/R + 2E R

and, since R = 2M on the AH,

 " 2M −Rr  dt  = √ r  dr AH 1 + 2E

(18.82)

(18.83)

(18.84)

In the vacuum case Mr = 0, we have dt/dr AH = dt/dr n since "j = −1, i.e. the AH is null. Note that Mr = 0 could be only local, so the AH would be null only in that region. For hyperbolic regions, with E ≥ 0 along each dust worldline, there is either only expansion or only collapse, i.e. only one AH (either the future AH+ or the past AH− )

314

The Lemaître–Tolman geometry

can occur. The two AHs can thus cross only in an elliptic E < 0 region. At the moment of maximum expansion, where Rt = 0, the maximal value of R is R = −M/E. In elliptic regions, with −1 < 2E < 0, this Rmax is thus always greater than 2M, so the dust source always escapes from the past AH before it falls into the future AH. However, at those locations where 2E = −1, the maximal R equals 2M, which means that the past AH touches the future AH. Such a location is a neck, the nonvacuum analogue of the Kruskal wormhole. We shall come back to it in Section 18.10. To establish whether the AH is timelike, null or spacelike, we compare the slope of the AH+ with the outgoing light ray (or the slope of the AH− with the incoming light ray), i.e. "j = −1:      2Mr dt  2Mr def dt  B =  = 1− = −"j 1 −  (18.85) dr AH dr n Rr Rr Now, since the conditions for no shell crossings (Section 18.10) require Mr ≥ 0 where Rr > 0 and vice versa, we have Bmax = 1 → AH+ outgoing null 1 > B > −1 → AH+ spacelike B = −1 → AH+ ingoing null −1 > B > −  → AH+ ingoing timelike

Mr = 0 = 0 for most Mr 

(18.86)

large Mr /Rr  very large Mr /Rr 

so an outgoing timelike AH+ is not possible. Thus outgoing light rays that reach the AH+ fall inside the AH+ , except where Mr = 0, in which case they move along it. The AH+ is timelike if1 1 dt " AH > √  (18.88) dM 1 + 2E The argument is similar for light rays at the AH− , except that ‘ingoing’ should be swopped with ‘outgoing’. If ingoing light rays reach the AH− , they pass out of it or run along it. The apparent horizons in the Friedmann models with  = 0 are always timelike, with the parameter B = −2 (see Exercise 18.8). The apparent horizons in elliptic regions require special attention, since two AHs are present in the same spacetime. We shall first consider the expansion phase of an elliptic model, where 0 ≤  ≤  and E < 0, so we have " = +1 and only the AH− is present. Since R = 2M on an AH, we have from (18.19): cos AH = 1 + 4E 1

Note that Eq. (18.88) can be equivalently written as follows:  dt  M " >√ r = Nr  dr AH 1 + 2E where N is the sum of rest masses within the r = constant sphere given by (18.17).

(18.89)

(18.87)

18.8 * Apparent horizons in the L–T model

315

and thus, along a given worldline, the proper time of passing through the AH− , counted from the Big Bang time tB , can be calculated from (18.19) with R = 2M to be  arccos 1 + 4E − 2 −2E 1 + 2E tAH− − tB = M  (18.90) −2E3/2 Note that tAH− − tB = 0 only at the centre of symmetry, where M = 0. This is the only place where the AH− can touch the Big-Bang set.1 The function F = tAH− − tB of the argument f = 2E, defined in (18.90), has the following properties, F−1 = M

F0 = 4M/3

dF <0 df

for − 1 < f < 0

(18.91)

i.e. it is decreasing. These properties mean that the AH does not touch the Big Bang anywhere except at a centre, M = 0, even if E = 0. Along all worldlines with E > −1/2, even parabolic worldlines for which E = 0 and M = 0, the dust particles emerge from the AH− a finite time after the Big Bang ( = 0) and a finite time before maximum expansion ( = ). So, although (18.89) shows that wordlines with larger E exit the AH− at a later stage of evolution, this need not correspond to a later time t, or even to a longer time (t − tB ) since the bang. It is not at all necessary that E is a monotonically decreasing function of r in an elliptic region; in general it can increase and decrease again any number of times. A shell of parabolic (E = 0) worldlines occurs at the boundary between elliptic and hyperbolic regions, where E → 0, but Er = 0 and M > 0. From (18.89) and (18.90) with " = +1, we see that  −→ 0 E→0

tAH− − tB −→ E→0

4 4M dE dt dtAH− −→ − + B dM E→0 3 5 dM dM

4M 3

(18.92)

so the AH− never touches the bang here, despite  being zero. The crunch time, i.e. the time of the final singularity, where  = 2, is found from (18.19) to be tC r = tB r +

2M  −2E3/2

(18.93)

so it diverges wherever E → 0 at M = 0. This divergence shows that either the bang time or the crunch time recedes to infinity, or both of them do. The third possibility will be illustrated in the next section. We also see the slope and the causal nature of the AH− are uncertain here. 1

But whether the coincidence of the AH− and the Big Bang at M = 0 is real or only a spurious coordinate effect depends on the precise shapes of the functions Er and tB r. A null or timelike segment of the Big Bang/Big Crunch singularity can stick out at the centre, and it is invisible in the comoving coordinates because they have a singularity there that squeezes this segment into a point. A signature of such a singularity is a family of different light cones with vertices at the same point of the coordinate grid. See Section 18.14.

316

The Lemaître–Tolman geometry

The behaviour of the AH+ during collapse can be obtained form the above by replacing (t −tB ) with (tC −t),  with (2 −), flipping the signs of " and j, and swopping ‘ingoing’ with ‘outgoing’. However, keeping tB as our arbitrary function, we have  ≤  ≤ 2. Equation (18.89) still applies, but instead of (18.90) we now obtain   + arccos−1 − 4E + 2 −2E1 + 2E  (18.94) t − tB AH+ = M −2E3/2 and (18.87) applies with " = −1. The corresponding results in an expanding E = 0 Er = 0 L–T model follow from (18.20) with R = 2M. Then, Eq. (18.92) becomes 4 dt dtAH− = + B (18.95) dM 3 dM The AH− may still exhibit all possible behaviours of (18.86) with ‘outgoing’ and ‘ingoing’ interchanged. In a collapsing parabolic model, time-reversed results apply. In expanding hyperbolic regions, using the same methods as for expanding elliptic regions, we find that the behaviour of the AH is qualitatively the same. There is of course only one AH, no maximum expansion, and loci where E = −1/2 are not possible, but the results for origins and for the parabolic limit both carry over. Collapsing hyperbolic regions are essentially like collapsing elliptic regions.

18.9 * Black holes in the evolving Universe This process was first described by Oppenheimer and Snyder (1939). They discussed the collapse of a Friedmann dust cloud matched to the Schwarzschild solution. They found that the collapse to the Schwarzschild horizon r = 2m takes a finite proper time for each infalling particle, but an infinite time for a static distant observer in the Schwarzschild region who would see the star gradually redden. For a comoving observer on the surface of an object of the mass of the Sun, but rarefied so that the initial density equals that of water, the time needed to reach the horizon would be of the order of one day. As the horizon is approached, light can escape outwards within a cone around the radial direction that becomes progressively narrower and closes completely at the horizon. The novel idea in the Oppenheimer–Snyder paper was to study the black hole in the process of its formation. The theory of black holes developed from the 1960s onwards is based on stationary vacuum solutions; that is, it describes black holes that have always existed and are observed from afar. The L–T model allows for an even more sophisticated approach (see below). Bondi (1947) observed that if matter in the L–T model is collapsing with a great velocity so that 1 + 2Er1/2 + R/t < 0, then along a light ray emitted away from the centre with the tangent vector k the quantity k R is negative, that is, the ray is forced to move inwards. A necessary condition for this is R < 2M; that is, a sufficiently high matter-density over a sufficiently large region. With hindsight, this was a prediction that black holes would form under certain conditions.

18.9 * Black holes in the evolving Universe

317

Several properties of the apparent horizons and black holes in an L–T model can be explained using the simple example discussed below. The parameter values used in it are unrealistic, having been chosen in such a way that all the figures are easily readable. We take an E < 0 L–T model whose Big Bang function tB M is tB M = −bM 2 + tB0 

(18.96)

and whose Big Crunch function is tC M = aM 3 + T0 + tB0 

(18.97)

where T0 is the lifetime of the central worldline (M = 0). The values of the parameters used in the figures will be a = 2 × 104  b = 200 tB0 = 5 and T0 = 005. They were chosen so as to make the figures readable and illustrative; they are unrelated to any astrophysical quantities. Since t = tC at  = 2, we find from Eq. (18.19):    2 1/3 M 2/3  1 2M 2/3 =−  (18.98) EM = − 2 tC − tB 2 aM 3 + bM 2 + T0 2/3 As M → , we have tB → −  tC → + and E → 0. Hence, the space contains infinite mass and has infinite volume. Unlike in the Friedmann models, positive space curvature does not imply finite volume; this has been known since long ago (Bonnor, 1985; Hellaby and Lake, 1985). The main features of this model are shown in Fig. 18.1. Note that the AH+ first appears at a finite distance from the centre, where the function tAH+ M has its minimum, and at a time ths < tC 0. At all times after the crunch first forms, t > tC 0, the mass MS already swallowed up by the singularity is necessarily smaller than the mass MBH that had disappeared into the AH+ . The mass MS cannot even be estimated by astronomical methods. The situation is reversed in time for the Big Bang singularity and the AH− . The 3-dimensional diagram of Fig. 18.2 shows the value of R at each t and each M. Figure 18.3 shows the ‘topographic map’ of the surface from Fig. 18.2. It contains contours of constant R (the thinner curves) inscribed into Fig. 18.1. It also shows several outgoing radial null geodesics. Each geodesic has a vertical tangent at the centre. √This is a consequence of using M as the radial coordinate. Since dt/dM = R/M/ 1 + 2E on each geodesic and R ∝ M 2/3 close to the centre, dt/dM ∝ M −1/3 and dt/dM → as M → 0. Each geodesic proceeds to higher values of R before it meets the apparent horizon AH+ , where it is tangent to an R = constant contour, and then proceeds towards smaller R values. The future event horizon consists of those radial null geodesics that approach the AH+ asymptotically. In Fig. 18.3, it lies between geodesics 5 and 6 (counted from the lower right); we shall discuss its location in more detail below. Geodesic 5 emanates from the centre M = 0, where the Big Bang function has a maximum. The tangent to the geodesic is horizontal there. Geodesics to the lower right of this one all begin with a vertical tangent. Likewise, the geodesics meet the Big Crunch with their tangents being vertical.

318

The Lemaître–Tolman geometry

crunch

AH

+

t = now

ths centre (M = 0)

MS

M BH

AH

–

time

mass bang

Fig. 18.1. Evolution leading to a black hole in the E < 0 L–T model of Eqs. (18.96)–(18.97). The current state is defined at the instant t = t2 = now. Worldlines of dust particles are vertical straight lines, each has a constant mass-coordinate. Intersections of the line t = t2 with the lines representing the Big Crunch and the future apparent horizon determine the masses MS and MBH , respectively.

By the time the crunch has formed at t = tC 0, the future apparent horizon already exists (see Figs. 18.1 and 18.3). The shells of constant values of M first go through the AH, and then hit the singularity at t = tC M. We assume that at the time t = t2 the singularity has accumulated the mass MS , while the mass hidden inside the apparent horizon at the same time is MBH > MS . Both of them grow with time. From the definitions of MS and MBH it follows that t2 = tC MS  = tAH+ MBH 

(18.99)

18.9 * Black holes in the evolving Universe

AH

319

radius

AH

+

–

centre crunch

time mass

bang

Fig. 18.2. A 3-dimensional graph of the black hole formation process from Fig. 18.1: the areal radius as a function of M and t. Each shell of constant mass evolves in a plane given by M = constant. It starts at R = 0, then escapes from the past apparent horizon AH− , then reaches maximum R, then falls into the future apparent horizon AH+ , and finally hits the Big Crunch. Note that the surface intersects the R = 0 plane perpendicularly all along the R = 0 contour. The apparent horizons are intersections of the RM t surface with the plane R = 2M. (In the k > 0 Friedmann model, the bang and the crunch would be parallel straight lines, and all the Rt M=const curves would be identical.)

Even though the model has a rather simple geometry, locating the event horizon is quite a complicated task that requires complete knowledge of the whole spacetime, including the null infinity. Hence, in a real Universe, where our knowledge (mostly incomplete and imprecise) is limited to a relatively small neighbourhood of our past light cone and our past worldline, the event horizon simply cannot be located by astronomical observations. The future event horizon (EH) is formed by those null geodesics that fall into the future apparent horizon ‘as late as possible’, i.e. approach it asymptotically. Hence, in order to locate the event horizon, we must issue null geodesics backwards in time from the ‘future endpoint’ of the AH+ . This cannot be done in the M t coordinates used so far because the spacetime and the AH+ are infinite. Hence, we must first compactify the spacetime. The most convenient compactification for considering null geodesics at a null infinity is,

320

The Lemaître–Tolman geometry

crunch

AH

+

t = now

MS

centre (M = 0)

MBH

AH

–

time

mass bang

Fig. 18.3. Contours of constant R-value (the thinner lines) and outgoing radial null geodesics inscribed into the spacetime diagram of Fig. 18.1. The R-values on consecutive contours differ by always the same amount.

18.10 * Shell crossings and necks/wormholes

321

theoretically, the Penrose (1964) transform that spreads the null infinities into finite sets. However, in order to find a Penrose transformation, one must first choose null coordinates, and in the L–T model this has so far proven to be an impossible task (Stoeger, Ellis and Nel, 1992; Hellaby, 1996a). Hence, we will use a less convenient compactification that will squeeze the null infinities into single points in the 2-dimensional (time–radius) spacetime diagram. It is provided by the transformation M = tan 

t = tan 

(18.100)

In these coordinates, the R1 × R1+ space of Figs. 18.1–18.3 becomes the finite −/2 /2 × 0 /2 rectangle. See Fig. 18.4. The upper curve in Fig. 18.4 is the Big Crunch singularity; the future apparent horizon runs so close to it that it seems to coincide with it.1 The horizontal line is the  = now line. The lower curve is the Big Bang and the past apparent horizon, again running one on top of the other. The point on the -axis where the three lines meet is the image of the M = 0 line of Fig. 18.1, squeezed here into a point because of the scale of this figure. The theoretical method to locate the future event horizon would now be to run a radial null geodesic backwards in time from the point   = /2 /2, i.e. from the image of the future end of the AH+ . However, for the most part, the AH+ runs so close to the crunch singularity, and the geodesics intersecting the AH+ are so nearly tangent to AH+ , that numerical instabilities crash any such geodesic into the singularity instantly. This happens all the way down to  = 11 at double precision. The calculation succeeded, with double precision, only at  = 10, and a null geodesic could be traced from there to the centre at  = 0. On the scale of Fig. 18.4, this whole geodesic seems to coincide with the crunch and the AH+ . However, it is well visible if one closes in on the image of the area shown in Fig. 18.1; the closeup is shown in the inset. The event horizon is transformed back to the M t coordinates and written into the frame of Figs. 18.1–18.3 in Fig. 18.5. As stated earlier, the event horizon is located between geodesics 5 and 6 from the lower right in Fig. 18.3. By accident (caused by our choice of numerical values in this example), the EH hits the centre very close to the central point of the Big Bang, but does not coincide with it. This whole construction should make it evident that there is no chance to locate the event horizon by astronomical observations, even approximately. It only makes sense, in the observational context, to speak about an upper limit on the mass inside the apparent horizon.

18.10 * Shell crossings and necks/wormholes The mass density in the L–T model becomes infinite where Rr = 0 = Mr . This singularity is called shell crossing because at those locations the radial distance between two adjacent 1

From Eqs. (18.93)–(18.94), the time difference between the crunch and the AH+ goes to infinity when M → . However, the ratio of this time difference to the crunch time goes to zero, which explains why the two curves in Fig. 18.4 meet at the image of the infinity. The same is true for the Big Bang and the AH− .

322

The Lemaître–Tolman geometry 2

+&

AH 1.5

BC

τ = now

1.382

1

1.38

0.5 1.378

0 1.376

1.374

–0.5

1.372

–1

1.37 0

0.005

0.015

0.02

τ

–1.5

μ

–2

0.01

0

0.2

AH

0.4

0.6

0.8

–

&B

1

1.2

1.4

1.6

Fig. 18.4. The spacetime diagram of Fig. 18.1 compactified according to Eq. (18.100). The region shown in Fig. 18.1 is squeezed into the point where the three lines meet at the -axis. The worldlines of dust are still vertical straight lines here. The upper curve is the future apparent horizon AH+  and the Big Crunch (BC) singularity, they seem to coincide at the scale of this picture. The lower curve is the past apparent horizon AH−  and the Big-Bang (BB) singularity, again coinciding only spuriously. The horizontal straight line is the  = now time. Inset: a closeup view of the image (in the coordinates  ) of the region shown in Fig. 18.1. The thicker line is the event horizon. It does not really hit the central point of the Big Bang; the apparent coincidence is just an artefact of the scale.

18.10 * Shell crossings and necks/wormholes

323

5.14

5.12

crunch

5.1

AH

5.08

+

t = now 5.06

5.04 centre (M = 0)

M BH

MS

5.02

5 AH

–

time

4.98

mass

4.96

bang

4.94 0

0.002

0.004

0.006

0.008

0.01

0.012

0.014

0.016

Fig. 18.5. The event horizon (thicker line) written into the frame of Fig. 18.1. Its intersection with the M = 0 axis does not coincide with the central point of the Big Bang; this is only an illusion created by the scale.

shells that have different values of r becomes zero. If Rr changes sign there, then the mass density on the other side of the shell crossing becomes negative. The tetrad components of the Riemann tensor (in the tetrad e0 = dt e1 =   √ Rr / 1 + 2E dr e2 = R d e3 = R sin  d) are: R0101 =

2M M − 2 r  R3 R Rr

R0202 = R0303 = −

M M R1212 = R1313 = 3 − 2 r  R R Rr

M 1 = R2323  R3 2

(18.101)

324

The Lemaître–Tolman geometry

Thus, the shell crossing is a curvature singularity (the quantities listed above are scalars and some become infinite where Rr = 0 = Mr ). It is considered less ‘dangerous’ than the Big Bang for two reasons: 1. In real astrophysical objects of high density, pressure gradients are present, and these should be able to prevent the occurrence of shell crossings. The L–T model is simply not general enough to describe such a situation, and it is believed that the shell crossing is a zero-pressure limit of an acoustic wave – of high, but finite, density. 2. A bundle of geodesics sent into a shell crossing singularity does not become focussed into a surface or a line, unlike at the Big Bang. This means that material objects hitting a shell crossing would not be crushed (we refer the reader to Joshi (1993) for details). For this reason the shell crossing is called a weak singularity. This singularity can be avoided if the shapes of the arbitrary functions are properly chosen. There are two ways to avoid it: (1) by setting up the functions so that Rr = 0 in the whole range of applicability of the model; and (2) by setting up the functions so that Rr = 0 only at those locations r = rw where Mr = 0, and limr→rw Mr /Rr < . We shall first deal with the second situation, by the method of Hellaby and Lake (1985). We assume that t ≥ tB , i.e. we consider an expanding model. For collapse towards the Big Crunch t ≤ tC , it suffices to replace (t − tB ) with (tC − t) and tBr with (−tCr ). In order that the density remains finite at r = rw , it is necessary that Mr rw  = 0

(18.102)

Since M does not depend on t, the density can be finite only if the locus of Rr = 0 does not depend on time, either. This means that Rr = 0 holds along a worldline of dust. Equation (18.102) is only a necessary condition for finite mass density. The sufficient condition is that the limit of Mr /Rr at r = rw is finite. This condition becomes particularly simple if we choose M as the radial coordinate, it is then   (18.103) lim R3 M > 0 M→Mrw 

From (18.20) we then easily see that for the E = 0 model, if Rr = 0 = Mr at r = rw , then automatically tBr rw  = 0. For the other two models, we find from (18.19) and (18.21)

    Mr Er 3 Er Mr t − tB  − tBr Rt  Rr = (18.104) − R+ − M E 2 E M √ Since Rt = ± 2M/R + 2E is a different function of time than R, the equation Rr = 0 = Mr can hold over all times only if the coefficients of Rt and R vanish identically, i.e. Er = 0

tBr = 0

(18.105)

18.10 * Shell crossings and necks/wormholes

325

Thus the necessary conditions for the absence of a shell crossing at such r = rw at which Rr = 0 are (18.102), (18.104) and (18.105).1 If these conditions hold and 1 + 2Erw  = 0, then Eq. (18.16) shows that the metric component g11 goes to zero. However, since we have already assumed that Mr /Rr is finite at r = rw , Eqs. (18.101) show that the curvature is nonsingular there. Hence, with (18.102), (18.103) and (18.105) all fulfilled, while 1 + 2Erw  = 0, the locus r = rw is only a coordinate singularity. It can be removed by a coordinate transformation that also removes the property Rr = 0, i.e. makes at least one of the functions Mr  Er and tBr non-zero at rw . The situation is different when Erw  = −1/2. Equations (18.90) and (18.94) show then that the past and future apparent horizons meet at r = rw  t = tw = tAH rw , which is the instant of maximal expansion. An outgoing radial null geodesic that would leave the past AH through the hypersurface r = rw would immediately fall inside the future AH. An outgoing radial null geodesic that is already out of the past AH with r < rw must enter the future AH with t > tw  r < rw . Thus, no light ray can be sent from the region tAH− ≤ t ≤ tAH+  r < rw  to the region tAH− ≤ t ≤ tAH+  r > rw . In this case, the locus r = rw is called a neck or a wormhole, and it is a generalisation of the Kruskal–Szekeres ‘throat’ at r = 2m of the Schwarzschild solution. In the vacuum limit (Mr = 0 over an extended region), the neck goes over into the Kruskal–Szekeres throat. In the nonvacuum case, the neck need not be mirror-symmetric with respect to (r − rw ). The possibility of existence of such a neck was first noted by Barnes (1970). Then, a generalisation of it appeared in numerical studies of a model with nonzero pressure gradients by Suto et al. (1984). For illustrative examples of necks see Hellaby (1987), Hellaby and Krasi´nski (2002), Krasi´nski and Hellaby (2004b) and Fig. 18.6.2 Now we come to the conditions for avoiding shell crossings at those points where Mr = 0. We wish to translate the condition Rr = 0 into properties of the functions Mr Er and tB r. The cases Rr > 0 and Rr < 0 have to be considered separately. We will write out the conditions only for Rr > 0. For Rr < 0, the inequalities (18.106), (18.110), (18.111), (18.116) and (18.117) must have their senses inverted. In all cases, in those regions where Rr > 0, in order that the mass density is positive, we must have Mr > 0

(18.106)

From here on, the three types of models have to be considered separately. 18.10.1 E < 0 Making use of (18.14) for expansion (Rt > 0) and of (18.19), we rewrite (18.104) as     Mr Er −2E3/2 3 Er Mr Rr def = − + − 1  − tBr 2  = f (18.107) R M E 2 E M M 1 2

Sufficient conditions more specific than (18.103) are difficult to formulate. 2 2 2 The functions

used in drawing  Fig. 18.6 are as follows: Mr = Mw + dr − rw   tB r = tB0 − bd r − rw   Er = −1/2Mw / Mw + dr − rw 2 + adr − rw 2 and tC r = 2Mr/−2Er3/2 + tB r – the crunch time; the parameters are Mw = 200 d = 01 rw = 20 tB0 = 100 b = 20000 and a = 10.

326

The Lemaître–Tolman geometry time crunch

neck AH

+

–

AH

bang r

Fig. 18.6. An example of a spacetime region around a neck. The neck is the vertical straight line, which represents a world-tube with spherical cross-sections r = rw . The two apparent horizons touch each other at the neck, at the instant of maximal expansion of the model. Every future-directed radial null geodesic that touches the AH− is forced to leave the AH− ; every such geodesic that touches the AH+ is forced to fall into the AH+ . This is why there is no communication between the region outside both AHs to the left of the neck and the corresponding region to the right of the neck. The functions in the figure are mirror-symmetric with respect to the neck, but in general they would not be.

where def

1  =

sin  − sin   1 − cos 2

def

2  =

sin   1 − cos 2

(18.108)

The function f should be strictly positive in the whole range  ∈ 0 2. Note that lim 1  = 2/3

→0

lim 2  = 

→0

lim

→2

lim 1  = − 

→2

lim 2  = − 

→2

(18.109)

1  = 2 2 

Hence, taking (18.107) in the limit  → 0, we see that the last term becomes unbounded, and it will be positive only if tBr < 0

(18.110)

Now we take (18.107) in the limit  → 2. Then the last two terms become unbounded. Factoring out 2 , which goes to − , and demanding that the (bounded) coefficient is negative in the limit, we obtain:   −2E3/2 3 Er Mr (18.111) − − tBr < 0 2 2 E M M

18.10 * Shell crossings and necks/wormholes

327

Equations (18.106), (18.110) and (18.111) are the necessary conditions for the absence of shell crossings in the case Rr > 0. They are also sufficient (see Exercise 10). The meaning of (18.111) is that the crunch time must be an increasing function of r. Figure 18.3 can now be used to illustrate how Eqs. (18.110) and (18.111) work. Recall that mass is used as the radial coordinate there, so Mr = 1 > 0 is assured. Since the worldlines of the dust source are constant-M lines (i.e. vertical straight lines), they can never intersect in a t–M diagram, even at shell crossings. A shell crossing would show in this picture as a point where a constant-R contour has a horizontal tangent. (Apart from the central points of the two singularities, M = 0 at R = 0, no such points exist in this example, because the functions EM and tB M were chosen appropriately.) The centre of symmetry M = 0, the Big Crunch and the Big Bang together form the R = 0 contour. Adjacent contours of small constant R must have a similar shape. Hence, if either of the two equations were not fulfilled, either the upper branch or the lower branch of some contours would be a non-monotonic function, whose derivative by M would change sign somewhere. At the changeover points, the tangents to the contours would be horizontal, and these would be the shell crossings.

18.10.2 E = 0 We calculate from (18.20): Mr Rr = − R 3M

√ 2MtBr  R3/2

(18.112)

As R → 0, the second term dominates, so, in order that Rr > 0 everywhere, we must have tBr < 0. Together with (18.106) this is then seen to be the necessary and sufficient condition. 18.10.3 E > 0 The analogue of (18.107)–(18.108) is here     Mr Er 3 Er Mr 2E3/2 Rr = − + − 3  − tBr 4  R M E 2 E M M

(18.113)

where def

3  =

sinh sinh  −   cosh  − 12

def

4  =

sinh   cosh  − 12

(18.114)

The following properties of 3  and 4  are useful in calculations: lim 3  = 2/3

→0

lim 4  = 

→0

d3 >0 d

lim 3  = 1

→

lim 4  = 0

→

for  > 0

d4 <0 d

for  > 0

(18.115)

328

The Lemaître–Tolman geometry

Now take (18.113) at  → 0. The last term dominates, and it will be positive if tBr < 0

(18.116)

Taking (18.113) at  → we easily obtain Er > 0

(18.117)

Equations (18.106), (18.116) and (18.117) are necessary conditions for Rr > 0. To see that they are also sufficient, it suffices to rewrite (18.113) in the form   2E3/2 Mr E 3 Rr (18.118) = 1 − 3  + r 3 − 1 − tBr 4  R M E 2 M and take note of (18.115).

18.11 The redshift In several applications of a cosmological model, we need to calculate the redshift of light emitted by a source at a given time and location and received by an observer located down a null geodesic from the source. In fact, we already have a ready-touse formula, Eq. (16.20), but the field of tangent vectors to the geodesic, k , must be affinely parametrised. Transforming it to such a parametrisation is usually not easy, so, for numerical calculations, it is often more convenient to use other methods. One of them is the following method (copied from Bondi (1947)). From (18.16), for a radial null geodesic proceeding towards the observer, we find R t r dt  = − r dr 1 + 2Er

(18.119)

Let two light rays be emitted in the same direction, the second one later by a small time-interval . Let the equation of the first ray be t = Tr

(18.120)

and that of the second ray t = Tr + r. Both rays must obey (18.119), so R Tr r dT  = − r dr 1 + 2Er

dT +  R Tr + r r  = − r dr 1 + 2Er

(18.121)

Since r was assumed small, we have, to first order in , Rr Tr + r r = Rr Tr r + rRtr Tr r

(18.122)

Using (18.122) and the first of (18.121) in the second of (18.121) we obtain R Tr r d  = −r tr dr 1 + 2Er

(18.123)

18.11 The redshift

329

If  at emission is the period of a wave, then, comparing it with the corresponding period at the point of observation, we obtain robs  = 1 + zrem  rem 

(18.124)

Keeping the observer at a fixed position and considering the sources at two distances, rem and (rem + dr), we find by differentiating the above that d/dr/ = −dz/dr/1 + z. Using this in (18.123): 1 dz Rtr Tr r  =  1 + z dr 1 + 2Er

(18.125)

Hence, the redshift may be calculated numerically from: ln1 + zr =



robs rem

Rtr Tr r dr  1 + 2Er

(18.126)

This formula is equivalent to (16.20) (see Exercise 11), but here the parameter on the null geodesic is just the coordinate r. Exercise 11 also shows how to introduce the affine parametrisation for the field k . That parametrisation can be introduced by the general method presented in Section 5.2, and we shall do it here. Let us choose the parametrisation in (18.119) so that k1 = −1

R k0 = √ r  1 + 2E

(18.127)

The first equation above says that the parameter on the geodesic is  = −r

(18.128)

Since this parametrisation is not affine, k obeys, according to (5.11), k  k = −d ln /dk . Substituting here the k from (18.127) we find the coefficient to be −

1 d Er R R = 2 √ tr − rr +  d 1 + 2E 1 + 2E Rr

(18.129)

Now the meaning of all the symbols has to be precisely understood. The differential equation (18.129) holds along a single null geodesic, so all quantities in it have to be taken along that geodesic. In particular, wherever any function depends on t, the coordinate t in it must be replaced by the Tr of (18.120). The derivatives of R in (18.129) had been taken before the quantities were specialised to the null geodesic, so they are partial derivatives. Hence, Rrr is not the total derivative of Rr by r, but just the partial derivative by the second argument of Rr . It is related to the total derivative, denoted D/dr, by DRr Tr r dT = Rtr Tr r + Rrr Tr r dr dr

(18.130)

330

The Lemaître–Tolman geometry

Substituting from (18.121) for dT/dr we obtain from the above Rrr Tr r =

DRr Tr r R Tr r  + Rtr Tr r  r dr 1 + 2Er

(18.131)

Substituting this in (18.129) and recalling that  = −r we obtain 1 DRr Tr r Er 1 d Rtr Tr r − +  =  Rr Tr r dr 1 + 2Er dr 1 + 2Er Now this can be integrated with the result   √  R Tr r 1 + 2E tr dr  exp =C  Rr Tr r 1 + 2Er

(18.132)

(18.133)

where C is an arbitrary constant. From (5.12), the parameter  of (18.127)–(18.128) is related to the affine parameter s by d/ds = /C, so the field k of (18.127)–(18.128) is related to the same field in the affine parametrisation, denoted  k , by  k =  /Ck . Consequently, the components of the affinely parametrised field are    R Tr r tr 0  dr  k = exp  1 + 2Er   √  R Tr r 1 + 2E tr  k1 = − dr  (18.134) exp  Rr Tr r 1 + 2Er

18.12 The influence of inhomogeneities in matter distribution on the cosmic microwave background radiation Saez and collaborators (Arnau et al., 1993, 1994; Saez et al., 1993) studied the interaction of the cosmic microwave background (CMB) with inhomogeneities in matter distribution placed in the path of the CMB rays. Since it was a major numerical project, its results will be only briefly reported here. The CMB radiation has, to a high accuracy, the black-body spectrum (17.73). During the period to which the L–T model can be applied (after radiation had decoupled from matter), photons do not interact with matter and it is assumed that their

 number is conserved. In a Friedmann model, this conservation implies d I!tR3 t /dt = 0. Then, again in a Friedmann model, Eqs. (16.20) and (17.13) imply !R = constant. Thus, assuming that the black body spectrum is preserved in time, we conclude from (17.73) and (17.13) that the temperature of the radiation changes from the emission instant te to the observation instant to by the law Tte   (18.135) Tto  = 1+z This can be generalised to the L–T model by observing that in small neighbourhoods it behaves like a Friedmann model, so Eq. (18.135) can be applied to nearby

18.12 Influence of inhomogeneities on CMB

331

points on the same null geodesic, with parameter values r and (r + dr), thus dln T/dr = −dlnn + z/dr. In this way, differences in temperature at reception between light rays going along different paths can be calculated. The quantity used in calculations is the temperature contrast #T/T , where T is the temperature along a ray that has been propagating through a Friedmann region all the way and #T is the difference between T and the observed temperature in a given direction. This approach was first applied by Raine and Thomas (1981). They considered a large-scale but small-amplitude condensation in the path of light rays of the microwave background reaching an observer. The rays were assumed to be emitted and received in a Friedmann region. The equations of null geodesics were integrated numerically in order to calculate the temperature at the reception point and compare it with the temperature at endpoints of rays propagating all the way through a Friedmann medium. The temperature variation was calculated as a function of the direction of observation. The most comprehensive study by this method was done by Arnau, Fullana, Monreal and Saez (Arnau et al. 1993, 1994; Saez et al., 1993). They computed numerically the dependence of the temperature contrast on the direction of observation for the microwave background radiation for a model consisting of a Friedmann background, with an arbitrary density parameter $ = / cr (where is the actual mean mass density in the Universe and cr is the critical density defined by (17.30)), and with a localised L–T perturbation superimposed on it. The numerical code allowed them to fit a model with a few free parameters (describing the density profile of the condensation, the background density parameter and the Hubble parameter) to the observed characteristics of the Great Attractor or of the Virgo cluster, and then to calculate the anisotropy in temperature of the background radiation caused by these condensations. The authors calculated the temperature anisotropies in the background radiation produced by models of the Great Attractor with different density and velocity profiles, and with different density parameters of the Friedmann background. Specifically, they calculated the effects of the following: 1. Various velocity profiles in the attractor model with a fixed background density parameter and fixed distance from the observer. 2. Various background density parameters with a fixed velocity profile and the distance adjusted so as to produce the largest effect. 3. Various distances to the condensation with a fixed velocity profile and a fixed background density parameter. The result was that the maximal anisotropy to be expected is up to 3 × 10−5 (when $ = 015), at the angular scale of 10 . This agrees with the current measurements, which give 2 × 10−5 (WMAP, 2004).1 1

The value of this anisotropy invites a comment. The high degree of isotropy of the CMB radiation has frequently been used as an argument in favour of the Friedmann models, and the ‘reasoning’ was that inhomogeneities in matter distribution would leave an imprint on the radiation. However, for a long time these claims had not been backed up by any calculations. The results of Saez et al. show that no trace of such an imprint could show up until the precision of measurements of temperature anisotropies reached the level of 10−6 , which happened only in 1993 (Mather et al., 1993).

332

The Lemaître–Tolman geometry

18.13 Matching the L–T model to the Schwarzschild and Friedmann solutions As already observed in Section 18.3, the Schwarzschild solution is the vacuum limit of the L–T model that results when Mr = 0. For various purposes, a spacetime model is sometimes considered consisting of the L–T solution in the region r ≤ rb matched to the Schwarzschild solution in the region r ≥ rb . The Schwarzschild solution should then be represented in the Lemaître–Novikov coordinates, as in (14.116)–(14.117). As shown in Section 12.17, the matching conditions to (18.16) require that RLT t rb  = RS t rb 

Rr /N LT = Rr /N S 

(18.136)

where S stands for ‘Schwarzschild’ and LT for ‘Lemaître–Tolman’, and N=√

Rr 1 + 2E

(18.137)

in both metrics. As a result, Rr cancels out in the equations, and the matching conditions reduce just to the continuity of E R and Rt , i.e. Erb  LT = Erb  S  Mrb  = m

tB rb  LT = tB rb  S 

(18.138)

where m is the mass parameter of the Schwarzschild solution. What is obtained after the matching is in fact a single L–T model with Mr going over into the constant function M = m at r = rb . Sometimes, the matching between the L–T and Friedmann spacetimes is considered; for example, when discussing the formation of galaxy clusters or voids (Krasi´nski and Hellaby, 2002, 2004, 2005, and Section 18.6). It is then assumed that at a certain distance from the centre of the cluster or void the L–T metric goes over into an unperturbed Friedmann model. Equations (18.136)–(18.138) must apply also then, with the subscript ‘S’ now referring to Friedmann. In particular, the last equation of (18.138) now reads MLT rb  = MS rb , where MS rb  is the Friedmann mass function calculated at r = rb . This means that the Friedmann mass removed from within r = rb must be the same as the L–T mass filling that sphere. This is a necessary and sufficient condition for matching because the other two equations in (18.138) can always be fulfilled: the first determines the value of the Friedmann curvature index k, the second can be fulfilled by time-translation in the Friedmann spacetime. As observed by Ribeiro (1992a), this equality of masses implies that in such a configuration any region of density higher or lower than that in the Friedmann background must be compensated by a region of a lower or higher density, respectively.

18.14 * General properties of the Big Bang/Big Crunch singularities in the L–T model At all points apart from the centre of symmetry, both these singularities are spacelike. This is verified as follows: since the singularities are parts of the set R = 0, calculate the

18.14 * Properties of singularities

333

normal vector field to any hypersurface R = constant. It has components Rt  Rr  0 0, so g ! n n! = g 00 Rt 2 + g 11 Rr 2 , which, using (18.14) and (18.16), becomes g ! n n! =

2M − 1 R

(18.139)

This is negative for R > 2M, zero at the apparent horizon and positive for R < 2M. Consequently, the vector field n is, respectively, spacelike, null or timelike, i.e. the hypersurface R = constant is timelike, null or spacelike. Thus, as we approach the nonsingular centre of symmetry R → 0, the regularity condition (18.31) implies that 2M/R → 0, so the nonsingular part of the set R = 0 is timelike. As we approach the singularity R → 0 along a line M > 0, the expression (18.139) tends to + , so the part of R = 0 in which M > 0 is spacelike. The orientation of the central part of the singularity, where the line of centre of symmetry hits the Big Bang or Big Crunch set, is not simple to determine, since the comoving coordinates have a singularity there, too, and they do not allow one to see the geometric relations clearly. It had taken quite an effort to notice that the locus in which the two parts of the set R = 0 meet need not be a single point, but, under certain circumstances, may be a finite segment of a timelike or null curve. The first to note the possibility of this peculiar behaviour (during a numerical investigation of an E = 0 model) were Eardley and Smarr (1979), and they called the phenomenon shell focussing. They stated that the segment of the centre of symmetry in which shell focussing occurs can only be null. However, the criteria for the occurrence of a shell focussing, which they gave without derivation, do not look entirely credible because they refer to the limit of tB /M as r → rc , while the value of tB is coordinate-dependent. Hellaby, in his unpublished Ph.D. Thesis,1 found that the segment in question can be timelike as well. If the singularity is all spacelike, then its intersection with the worldline of the centre of symmetry can be imagined as a single point – no future-directed light ray can leave the singular set. However, if the singularity contains a timelike or null segment, then, as will be shown below, that segment is a common vertex of an infinite family of distinct light cones. The conclusion is that the non-spacelike segment of the singularity is an extended arc of a curve that is mapped into a single point in the comoving coordinates, which have their own singularity there. The discussion below was inspired by the paper of Christodoulou (1984) and the unpublished work of Hellaby and Lake (1988), but is a great simplification of both. Take the E = 0 L–T model with the function Mr chosen as follows: Mr = M0 r 3 

1

We are grateful to C. Hellaby for giving us access to his thesis.

(18.140)

334

The Lemaître–Tolman geometry

where M0 is a constant. (This is a definition of the coordinate r.) Since we will be discussing collapse, we set in (18.20):  1/3 9 Rt r = (18.141) Mr tB r − t2 2 so that t increases from an initial value to t = tB r, which is now the final (Big Crunch) singularity. Now choose tB r: tB r = ar 2 

(18.142)

where a > 0 is a constant, so that the Big Crunch starts at r = 0 with t = 0 and then proceeds to greater r-values as t increases (see Fig. 18.7). We find then that the equation of an outgoing radial null geodesic is 

dt dr



 = n

9M0 2

1/3

7 ar 2 − t 3  ar 2 − t1/3

(18.143)

The set where t = 7ar 2 /3 would be a shell crossing singularity, but it lies to the future of the Big Crunch, and hence does not belong to the physical spacetime. It is seen that, as we approach the Big Crunch singularity along any line that terminates at t = ar 2 with a nonzero r-value, the derivative dt/dr becomes infinite, i.e. the geodesics hit the Big Crunch set vertically in a t r diagram. As we approach any nonsingular point of the centre of symmetry line, r = 0 t < tB , the derivative dt/dr has a finite nonzero limit. In order to note what happens as we approach the intersection of the centre of symmetry with the Big Crunch along an arbitrary curve t = fr, write (18.143) in the form     dt 9M0 1/3 4/3 73 a − t/r 2 = r  (18.144) dr n 2 a − t/r 2 1/3 and consider the various possible limits of t/r 2 at r → 0 along different curves. The limit of t/r 2 may be zero, finite non-zero, or infinite. In the first two cases, (18.144) clearly shows that   dt lim = 0 (18.145) r→0t→0 dr n In the third case, when the limit of t/r 2 is infinite, it is useful to rewrite (18.144) in yet another form     dt 9M0 1/3 2/3 7ar 2 /3t − 1 = t  (18.146) dr n 2 ar 2 /t − 11/3 The infinite limit of t/r 2 means zero limit of r 2 /t, so (18.145) again holds. Thus, the limiting slope of a light ray emitted from the point p0 of coordinates t r = 0 0 consistently comes out to be zero for all nonsingular paths of approach to p0 (see Fig. 18.7), but when this point is approached along the Big Crunch singularity, the tangent to the light ray is vertical. This suggests that there is some structure hidden in p0 .

18.14 * Properties of singularities

335

t

r

Fig. 18.7. Outgoing radial light rays in the neighbourhood of the central singularity in the spacetime (18.141). The vertical arrow is the axis of symmetry, the thicker parabola is the Big Crunch singularity and the lighter curve is the apparent horizon. At all points except at the centre, the rays hit the singularity vertically (the figure does not show this). At all points except at the singularity, the rays hit the axis of symmetry with non-horizontal tangents. When the common point of the axis and of the singularity is approached along any curve except the singularity itself, the direction of the outgoing light ray tends to the horizontal. Light rays emanating from the central point of the singularity are tangent to the singular set and to the apparent horizon, but d2 t/dr 2 calculated along those rays at t r = 0 0 is still zero, while d2 tB /dr 2 0 = d2 tAH /dr 2 = 0, so the rays can recede from the singularity out to a finite distance, still remaining before the apparent horizon. One such ray, the uppermost in the figure, is shown.

The equation of the apparent horizon in the spacetime considered is 4 tAH r = ar 2 − M0 r 3  3

(18.147)

Thus, the apparent horizon surface is tangent to the Big Crunch at r = 0, and initially proceeds towards larger t; tAH r becomes a decreasing function of r only at r = a/2M0  > 0 (that region is not visible in Fig. 18.7, which covers only the region of r < 02a/M0 ).

336

The Lemaître–Tolman geometry

We thus note that the Big Crunch set, the apparent horizon and the light rays emitted from p0 are all tangent at p0 . However, while the second derivatives of both the Big Crunch time and of the apparent horizon time are equal to 2a at p0 , the second derivative of t = tn r along a light ray is still zero, as can be found by differentiating (18.143) and taking the limit t → 0 r → 0 along the light ray:   2     dt 9M0 1/3 4ar 4/3 7 t p  = lim a − r→0 dr 2 n 0 2 r2 a − t/r 2 4/3 9    2 9M0 2/3 2/3 7a/3 − t/r 2  a t + − + 2  (18.148) r 3 2 a − t/r 2 5/3 3 r (This comes out zero, no matter what limit t/r 2 has at t r = 0 0.) Thus, light rays that start off from the point p0 initially recede from the Big Crunch and remain earlier than the apparent horizon. Consequently, each such ray will proceed out to a finite r without entering the apparent horizon. In Section 18.16 we will come back to the question whether the ray can escape to infinity. (In the example we consider now, if the dust distribution is spatially infinite, the apparent horizon begins to proceed to earlier times when r > a/2M0 , so the ray must eventually cross the apparent horizon and then hit the Big Crunch.) Which ray leaving the central point of the singularity is the earliest? Lacking an exact solution of (18.143), that ray can be identified only by numerical calculation. The best that can be achieved analytically is to prove that such a ray exists. For the proofs of existence in another model, with E < 0, readers are referred to the papers by Christodoulou (1984) and Newman (1986). Suppose that L is any such ray emitted from p0 = 0 0. Outgoing rays cannot intersect at t r = 0 0, and cannot be emitted into the spacetime from any other point of the Big Crunch. It follows that a ray passing through any point that lies to the future of L was also emitted from p0 . Thus there is an infinite family of light rays emanating from the point p0 and initially receding from the Big Crunch and the apparent horizon. It follows that p0 only looks to be a single point in the comoving coordinates; in reality it must be a timelike or null set. We have considered just one example of an L–T model, constructed deliberately so that it shows this unusual behaviour. There are L–T models in which the central point of the Big Crunch singularity cannot emit any light ray because that singularity is all spacelike. A time-reversed behaviour can occur at the central point of the Big Bang. It is seen from (18.119) that the tangent to the light ray becomes horizontal wherever Rr = 0. Using (18.104) for the E > 0 and E < 0 models and (18.20) for the E = 0 model we find that the terms not involving tBr go to zero at any point of the singular set t = tB , independently of the path of approach.1 If tBr = 0 at r = r1 , then the term tBr Rt in (18.104) and the corresponding term in (18.20) will become infinite as r → r1 because 1

√ √ √ To see this, note that Rt = " 2M + 2ER/ R, " = ±1 and that limt→tB t − tB / R = 0 (use the de l’Hôpital rule).

18.15 * Extension through a shell crossing

337

Rt −→ . Hence, a necessary condition for the light ray to have a horizontal tangent at r→r1

a point p1 located in the Big Bang/Big Crunch singularity is tBr p1  = 0 (the same is true for the E = 0 model). Whether it is also sufficient cannot be said in general because the limit of tBr Rt as p → p1 may depend on the path of approach to the point p1 . If we approach it along the r = r1 line, then the limit is always zero. The tangent to the light ray being vertical or horizontal in the t r graph has physical consequences. If the tangent is horizontal at the emission point, then the redshift observed at any other point is infinite. If the tangent is vertical, then an observer receiving the ray elsewhere will see it infinitely blueshifted. This was first noted without a proof by Szekeres (1980), and then calculated by Hellaby and Lake (1984) by the method of developing the quantities present in Eq. (16.20) into truncated Taylor series in R around R = 0. However, the calculation turned out to be rather complicated, so we shall explain this result by intuitive arguments only. Suppose that the tangent to the ray at the emission point is horizontal. This means that the ray proceeds along the surface of constant time, so there will be an infinite number of cycles of an electromagnetic wave in a unit of time. This just means that the frequency at the emission point is then infinite, which, by (16.20), implies an infinite redshift. Now let the tangent at the emission point be vertical. In the comoving coordinates, the velocity of the dust is vertical everywhere, i.e. it is tangent to the light cone at emission. Thus, the dust is leaving the Big Bang with the velocity of light. Consequently, an observer sitting on a dust particle would be riding on the crest of a light wave and would see zero frequency. By (16.20), this means that the ratio of the observed frequency to the frequency at emission is infinite, so at the observation point there would be an infinite blueshift. However, this infinity is just a consequence of the frequency of the emitter being zero – the frequency at the observation point is finite. Therefore, one should not expect any unusually strong influence of the radiation on matter in this case. In the Friedmann models, the light rays are horizontal at the Big Bang, i.e. the Big Bang is seen with an infinite redshift by any observer. Since the Big Bang in the L–T model is in general non-simultaneous, most light rays leave it vertically, which implies an instability of the Friedmann models – one more, in addition to the instability against the formation of condensations and voids.

18.15 * Extending the L–T spacetime through a shell crossing singularity The shell crossing singularity is considered a less serious breakdown of Einstein’s theory than the Big Bang – because it is believed to be just an artefact of the zero pressure gradient in the L–T model. In models with nonzero pressure gradients (which are so far unknown), it is expected that the shell crossing will be replaced by a region of high but finite density. In this section, we shall present one more reason why a shell crossing is relatively harmless: as observed by Newman (1986), the L–T spacetime can be extended through it. The extension is provided by the Gautreau coordinates of Section 18.7. For the general

338

The Lemaître–Tolman geometry

L–T model (with arbitrary E) the Gautreau coordinates are  R  , where  = t and R is the areal radius function obeying (18.14). Thus, in (18.16) we have 2M 1 Rr dr = dR − Rt dt = dR − " 2E + (18.149) + R2 d R 3   2M 1 1 2 2 ds = 1− − R d 2 1 + 2E R 3  2M 1 2 2 + 2" 2E + + R d dR − dR R 3   −R2 d 2 + sin2  d2  (18.150) where now the statement that M and E are functions of r translates into the partial differential equations: M 2M 1 M + " 2E + + R2 = 0 (18.151)  R 3 R and a similar equation for E. In these coordinates there is no trace of the shell crossing singularity, which means that the metric can be extended through it. However, the derivatives of the metric components g00 , g01 and g11 by R will now be singular at the shell crossing because M M r M (18.152) = = /Rr R r R r (all quantities to be taken at r = r R). Thus, the extension is of class C0 (continuous but non-differentiable), and the curvature tensor still has a singularity at the set Rr  R = 0. The components of the velocity field in the  R coordinates are 2M 1 0 1 u = 1 u = Rt = " 2E + u2 = u3 = 0 (18.153) + R2  R 3 The u1 is non-differentiable at the shell crossing, but continuous. Thus the derivative of u1 (and consequently the Christoffel symbols) will have a finite discontinuity there. The singularity of the flow makes itself visible in the behaviour of the geodesic deviation of the velocity field. As seen from (6.56), to offset the infinite values of the curvature at the shell crossing, the geodesic deviation x must be zero there, which means that different flow lines intersect. However, they continue behind the intersection points. Figures 18.8 and 18.9 show an example of a shell crossing in an E = 0 L–T model in the comoving coordinates (Fig. 18.8) and in the Gautreau coordinates (Fig. 18.9). As seen from Fig. 18.9, the region behind the shell crossing contains three superposed flows of dust: the streams that entered through the left wall, through the right wall and through the lower vertex.1 1

This kind of extension was considered by Clarke and O’Donnell (1992), but it is not clear from their figure what quantities are measured on the coordinate axes.

18.16 * Singularities and cosmic censorship

339

t

SC BC AH

+

r

Fig. 18.8. A shell crossing (SC) singularity in an E = 0 L–T model in the comoving coordinates. (The model used to draw the figure is the same as will appear in Section 18.16, Eqs. (18.154)– (18.159), but with different parameter values.) The vertical straight lines are flow lines of the dust, terminating in the Big Crunch (BC) singularity. AH+ is the apparent horizon. The other curves in the figure are contours of constant values of R. In the comoving coordinates, the flow lines cannot intersect in a spacetime diagram, even at shell crossings. A shell crossing is a location where Rr = 0, i.e. where the contour of constant R has a horizontal tangent – note that this is indeed so. The figure should help understand why the necessary and sufficient condition for avoiding a shell crossing is that the BC is an increasing function of r: note that the centre of symmetry and the BC singularity together form the R = 0 contour. Thus, since the contours of small constant R-values must approximately follow the shape of the R = 0 contour, if tBC r is not an increasing function, then the other R = constant contours must have a horizontal tangent somewhere. At the point where tBC becomes an increasing function, the shell crossing set meets the BC and at larger r-values is later than the BC, i.e. not in the physical region of the spacetime. Compare this with Fig. 18.3, where there are no shell crossings.

18.16 * Singularities and cosmic censorship The cosmic censorship hypothesis (CCH) does not in fact belong to the field of cosmology. However, the L–T model has been used many times as a testing ground for various formulations of the CCH. After reading this section, readers may have a false impression that the subject of CCH is buried under counterexamples. In reality, the debate is far from settled. The emphasis on counterexamples in this text does not reflect the true state of affairs and results from the fact that we are more interested here in applications of the L–T model than in settling the CCH issue. In its original formulation by Penrose (1969), the CCH said that relativity does not allow naked singularities. All singularities were supposed to be hidden inside horizons. A singularity can be locally naked, when light rays proceed from it out to a finite distance and turn back, or globally naked, when the light rays it emitted can escape to infinity. The CCH would preferably prohibit both kinds of naked singularity. It would certainly be desirable if the CCH were correct because a naked singularity could emit matter or radiation in unpredictable quantities at unpredictable times. However,

340

The Lemaître–Tolman geometry

SC AH

+

τ

R

Fig. 18.9. The situation from Fig. 18.8 in the  R coordinates of Gautreau. The Big Crunch singularity is at the vertical axis, where R = 0. The shell crossing (SC) is the wedge-shaped pair of curves; the tip of the wedge is the minimum of tS from Fig. 18.8 and the lower branch of the wedge is the part to the right of the minimum of tS in Fig. 18.8. More flow lines are drawn here than in Fig. 18.8 – the extra lines are the leftmost nine (which would lie, evenly spaced, to the left of the leftmost line in Fig. 18.8) and the uppermost one (which would lie to the right of the rightmost line in Fig. 18.8). Inside the wedge, three streams of matter are seen: the particles that entered through the lower face, the particles that entered through the upper face and the particles that entered through the tip. Note that this diagram does not faithfully represent all the features of Fig. 18.8. For example, the flow lines that intersect the right face of the SC here do not intersect the SC in Fig. 18.8. The function tr given by Rt r = constant is not one-to-one, i.e. for every point t1  r1  in Fig. 18.8 in the SC to the left of the minimum, with the value R1 of R, there is a point t1  r2  to the right of the SC that has the same value of R.

18.16 * Singularities and cosmic censorship

341

the history of the CCH turned out to be turbulent. A counterexample to this earliest formulation was provided by Yodzis, Seifert and Müller zum Hagen (1973), then the hypothesis was modified to exclude ‘non-generic’ cases, then another counterexample to the modified version appeared, followed by a new modification, and so the story went. We shall not follow it here; more information can be found in the book by Joshi (1993). Instead, we will describe some of the applications of the L–T model to the discussion of properties of singularities, the CCH among them. Our example of a naked shell crossing singularity closely follows the method of Yodzis, Seifert and Müller zum Hagen (1973). However, the functions used here are different because the original example was, apparently needlessly, quite complicated. The idea is to construct a ball of L–T dust of finite radius, matched to the Schwarzschild solution, and then to design a shell crossing singularity in it so that it reaches the surface of the ball before the surface crosses the future apparent horizon at R = 2M. At the surface, the apparent horizon coincides with the Schwarzschild event horizon, so the singularity thus constructed will be naked. We take the collapsing E = 0 =  L–T model (in which t < tB and t increases towards t = tB ), and we find the locus of Rr = 0 in it: def

t = tS r = tB r + 2

M t  Mr Br

(18.154)

Following Yodzis et al., we choose the simple function Mr = r, where  is a constant (this means only that we choose M/ as the radial coordinate; it does not limit the generality of the example). The centre of symmetry is at r = 0, and the regularity condition (18.31) is fulfilled. The surface of the L–T ball will be at r = b, and for r > b we have the Schwarzschild solution with the mass parameter m = b (it must be represented in the Lemaître–Novikov coordinates with E = 0 and with the appropriate value of tB b). Next, we choose such a form of the function tS r in (18.154) that it has a minimum at some r: tS r = ar − c2 + d

(18.155)

where a c and d are arbitrary positive parameters, whose values will be discussed later. The minimum of tS r is at r = c and it equals d, which means that for t < d the shell crossing does not exist yet. We equate (18.154) and (18.155) and solve the resulting differential equation for tB r. In order to fulfil the regularity condition (18.35), the integration constant must be zero. The result is tB r =

a 2 2 r − acr + ac2 + d 5 3

(18.156)

The time by which the shell crossing hits the surface of the ball is t = tS b = ab − c2 + d

(18.157)

342

The Lemaître–Tolman geometry

The time by which the surface of the ball crosses the apparent horizon is found by solving the equation R = 2M for t; it is a 4 2 tH b = tB b − b = b2 − b2 + ac + ac2 + d 3 5 3

(18.158)

and this must be greater than tS b, which means that 3  c > b+  5 a

(18.159)

This allows us to choose the mass parameter  and the location of the surface of the ball, r = b, quite arbitrarily. Also the instant when the shell crossing first appears, t = d, is arbitrary – Eq. (18.159) is the only condition to be fulfilled. If it is fulfilled, then the singularity reaches the surface of the ball at t = tS b given by (18.157), while the surface is still outside the Schwarzschild event horizon. Consequently, the singularity can send a null geodesic out to the future null infinity; see Fig. 18.10. In fact, for better physical interpretation, it is good to assume that the minimum of tS r is still inside the ball, so that the shell crossing begins inside the ball and not at the surface. For this, it is necessary that c < b. This can be fulfilled together with (18.159) only if a > 5/2b. This still leaves the parameters  b and d arbitrary. The Schwarzschild solution represented in the Lemaître–Novikov coordinates must have its Rt r equal at r = b to the Rt r of (18.154)–(18.156). Hence, ES b = 0 tBS b = tB b and m = b, where the subscript ‘S’ stands for ‘Schwarzschild’. Thus, it is simplest to choose ES r = 0 (which, in the Schwarzschild limit, is just a choice of coordinates; see Exercise 10 in Chapter 14), and then tBS r can be given any form by a transformation of r alone. A simple form is tBS r = r, with  = tB b/b. Then, the event horizon, R = 2m, is given by t = r − 4m/3, i.e. the singularity t = tBS r and the event horizon are parallel straight lines in the t r diagram, as in Fig. 18.10. (With arbitrary r, the event horizon would still be a parallely displaced copy of the singularity, but the graphs of both sets are in general curves.) The null geodesic equation in the Schwarzschild spacetime must then be integrated numerically. Now we will show that a shell focussing singularity can be globally naked. The method of proof is similar to the one used for shell crossings: the surface of the L–T dust ball has to be chosen at such a location that the ray emitted from the central point of the Big Crunch singularity hits it before the surface crosses the apparent horizon. Then the ray can continue out to infinity in the Schwarzschild region. Figure 18.7 shows that this is possible, since that ray remains before the apparent horizon for some time, but we will prove it formally. We will continue to consider the same example as in Section 18.14, i.e. the model defined by (18.140)–(18.142). We showed that the apparent horizon in it, (18.147), and the Big Crunch, (18.142), have a zero of second order at r = 0, while the function tn r that obeys the equation of a radial null geodesic has a zero of higher order there. def Consider the function fr = tAH r − tn r. It is zero at r = 0 and its first derivative by r is also zero at r = 0, while d2 t/dr 2 0 = 2a > 0. From (18.148) we see that d2 tn /dr 2 is

18.16 * Singularities and cosmic censorship

343

t

S BC EH AH

+

SC

r

Fig. 18.10. A schematic illustration of a naked shell-crossing singularity of the type of Yodzis et al. (1973). The vertical line is the worldline of the surface of the dust ball; the area to the right of it is the Schwarzschild spacetime. BC is the Big Crunch singularity, where t = tB r; outside the ball it goes over into the Schwarzschild singularity denoted SS. AH+ is the future apparent horizon; outside the ball it goes over into the Schwarzschild event horizon EH. SC is the shell crossing singularity that appears at t = d and grows inwards and outwards. The seemingly straight line below EH is the light ray emitted when the shell crossing reaches the surface of the body – it proceeds unimpeded to the future null infinity. For the shell crossing singularity to exist it is necessary that the Big Crunch function inside the body is decreasing with r (for an increasing tB r, the shell crossing is later than the Big Crunch).

  continuous at r = 0, and so is d2 tAH /dr 2 = 2a − 8M0 r. Consequently, d2 f /dr 2 , which equals 2a > 0 at r = 0, must remain strictly positive for 0 ≤ r ≤ r1 , where r1 > 0. This means that df/dr (which equals 0 at r = 0) is a strictly increasing function for 0 < r ≤ r1 , and so, being continuous, must be positive for 0 < r ≤ r2 , where r2 > r1 . This, in turn, means that fr, which is continuous, is increasing for 0 < r ≤ r2 , and so must be positive for 0 < r ≤ r3 , where r3 > r2 . Thus, at r = r3  fr3  > 0, i.e. tn r3  < tAH r3 . Choose the surface of the dust ball at r = b = r3 , and match the L–T model to the Schwarzschild spacetime there. The ray emitted from the central point of the Big Crunch singularity will reach the surface of the ball at r = b while tn b < tAH b, and then will continue unimpeded to infinity in the Schwarzschild region. This was the essential point of Christodoulou’s

344

The Lemaître–Tolman geometry

(1984) counterexample to the CCH, except that he used an E < 0 L–T model. Figure 18.7 can be used to illustrate this: the surface of the ball, r = b, can be chosen anywhere between r = 0 and the value of r at which the ray emitted from the singularity intersects the apparent horizon. The exterior region would then look the same as in Fig. 18.10. The other L–T counterexamples to the CCH demonstrated ever stronger violations of the hypothesis. We shall only describe them without going into details, since most of the arguments are highly technical. Newman (1986) discussed the strength of the naked singularities in the L–T model. Imagine a non-spacelike geodesic and a set of spacelike vectors orthogonal to it and propagated parallely along it. If the geodesic is timelike, the set will be 3-dimensional; if it is null, the set will be 2-dimensional. The limiting focussing condition (LFC) means, roughly, that the volume (for timelike geodesics) or area (for null geodesics) of the parallelepiped spanned on the vectors is decreasing as the singularity is approached. The strong LFC means that the volume/area tends to zero at the singularity. The conclusions of the paper are as follows: 1. Radial null geodesics hitting or leaving a shell crossing singularity in an L–T model do not obey the LFC. 2. Radial null geodesics hitting or leaving a shell focussing singularity in an L–T model obey the LFC, but not the strong LFC. The first result implies that a shell crossing singularity is weak and thus is not a conclusive counterexample to cosmic censorship. Waugh and Lake (1988) found that Newman (1986) excluded self-similar configurations1 (through his assumptions about energy density), and discussed the self-similar L–T model with E = 0 = . They found that a shell focussing singularity may be formed in it which will be globally naked and strong. It is strong in the sense that lim →0  2 R k k  = 0, where k is the tangent vector to a null geodesic hitting the singularity, is the affine parameter on the geodesic with = 0 at the singularity and R is the Ricci tensor of the L–T spacetime. Gorini, Grillo and Pelizza (1989) identified another subcase of the L–T models that was not captured by Newman and showed that it develops a globally naked shell focussing singularity that obeys the strong LFC, so it is to be taken as a serious counterexample to (one particular formulation of) the cosmic censorship postulate. Grillo (1991) showed by an example that a  = 0 L–T model with E < 0 and with a certain definite choice of Er Mr and tB r will form a locally naked shell focussing singularity that satisfies the strong LFC. A few authors (Waugh and Lake, 1988, 1989; Lemos, 1991; Eardley, 1974b; Dyer, 1979; Eardley and Smarr, 1979) found the conditions for the occurrence of a strong globally naked singularity in self-similar L–T models with  = 0. For E = 0, Lemos (1991) found the conditions numerically; for E = 0 an exact result can be derived with reference to the papers by Waugh and Lake (1989) and Dyer (1979). (In a self-similar spacetime, the Big Crunch function must have the form tC r = Br, where B > 0 is a constant. Then, a light ray can escape from the central point p0 of the Big Crunch only 1

A self-similar spacetime is one that admits a conformal Killing vector field such that the function in (8.55) is constant.

18.16 * Singularities and cosmic censorship

345

if the slope of the Big Crunch function, B, is larger than the slope of the ray at p0 .) A self-similar L–T spacetime has the metric (Dyer, 1979, and Exercise 12): ds2 = dt2 −

  S − sS  2 2 dr − r 2 S 2 d 2 + sin2 d2  1 + 2E

(18.160)

where E is a constant and S is a function of the variable s = t/r, the prime denotes the derivative with respect to s, and S obeys the equation S  = 2E + 2/S 2

(18.161)

(because of self-similarity, the function Mr must obey Mr/r = C = constant, and then the coordinate freedom was used to set C = 1). Now consider the orbits of the self-similarity transformations, t  = e t r  = e r  = constant,  = constant, i.e. the curves given by r = Dt  = constant,  = constant. They all meet at the point p0 with coordinates t r = 0 0. They are timelike, null or spacelike according as the expression  = 1 − D2 S − sS  2 /1 + 2E is positive, zero or negative. With S and E given, the equation  = 0 may or may not have a solution for D. If it has no solution, then all the orbits are spacelike and no light ray can escape the point p0 .1 Further (see Exercise 13), if  = 0 along the orbit, then the orbit is also geodesic (but neither t nor r is an affine parameter). Consequently, an orbit with  = 0 is also a path of a light ray escaping the central point of the singularity. We shall now find a condition for its existence in the E = 0 model. √ The solution of (18.161) with E = 0 is S = 3/ 2s − B2/3 , where B > 0 is a constant (so that the singularity is at t = Br), and for further considerations we choose the new variable u so that 1 1 s − B = u3  S = u2  S  = 2/u (18.162) 6 2 As shown above, the first ray to escape the singularity obeys t/r ≡ s = S −sS  . Substituting from the above and solving for B we obtain B=

u3 1 − u  6u + 2

(18.163)

s=

u3  2u + 2

(18.164)

and then the first of (18.162) yields

Now we interpret (18.163) and (18.164) as the parametric equations of a curve in the B s plane; see Fig. 18.11. We are interested in the smallest value of B > 0. We see that it corresponds to the local minimum of the function Bu. (In the other branch of the graph, the smallest value of B does not exist. That branch corresponds to rays proceeding towards the central point of the Big Bang in an expanding model.) By elementary methods 1

The orbits cannot be all timelike because the Big Crunch singularity also begins at p0 and is spacelike in every neighbourhood of p0 , however small. Hence, any future-directed timelike curve leaving p0 would then immediately hit the Big Crunch.

346

The Lemaître–Tolman geometry 30

s

25 20 15 10 5 B

0 –5 –10 –10

–5

0

5

10

15

20

25

30

35

40

Fig. 18.11. The graph of solutions of the equation s = S − sS  that determines the first ray to escape from the central point of the Big Crunch. The left branch is not really tangent to the vertical axis, it goes to small positive values of B. Values of B on the left branch correspond to a model expanding away from the Big Bang, in which the incoming rays hit the central point of the BB.

√ we find that Bu = 0 at u = −1 +  3, where  = ±1. Since Buu < 0 at u√= u− and is achieved at u = −1 − 3, which Buu > 0 at u = u+ , we conclude that the minimum √ corresponds to the value of B = Bm = 26/3 + 5 3. This is the minimum slope of the Big Crunch function, below which no light ray can escape from the central point of the Big Crunch. For B > Bm , the singularity is globally naked. Dwivedi and Joshi (1992) identified a class of the functions Mr which generate a strong naked singularity at the centre. In this class, the first and second derivatives of the initial density distribution by r are zero at r = 0 Most of the earlier papers considered special cases of this. In another paper, the same authors (Joshi and Dwivedi, 1993) showed that among the L–T variety of models one can find a subset in which there will be an at least locally naked strong curvature singularity at the centre. The class includes the configurations of Eardley and Smarr (1979) and of Christodoulou (1984). A continuous family of non-spacelike curves can be emitted from the singularity. The status of the CCH in 1993 was reviewed by Clarke (1993) and, more extensively, by Joshi (1993). Deshingkar, Joshi and Dwivedi (1999) defined a shell focussing singularity (SFS) to be strong if there exists a timelike or null geodesic % terminating in the SFS such that all the def geodesic deviation fields V  along % obey  = s0 − s2 R V  V  = constant > 0, where R is the Ricci tensor, s is the affine parameter along % and s = s0 is the location of the singularity. In terms of this definition, SFSs are always strong. The reason why earlier papers identified some of these singularities as weak was the selection of a special family of curves to calculate  . The property of being strong is stable against perturbations of symmetry.

18.17 Solving the ‘horizon problem’ without inflation

347

18.17 Solving the ‘horizon problem’ without inflation The ‘horizon problem’ was explained in Section 17.8 and Fig. 17.7. The inflationary models solve it by postulating that at some time before last scattering the Universe had been modelled by geometries in which the matter source was a scalar field, acting like a repulsive cosmological constant of large value. In that case, the Universe would have expanded exponentially, by the law R ∝ et .1 Another solution was invented by Celerier and Schneider (1998). They assumed that the L–T Big Bang function tB r has a local minimum at r = 0 and is increasing with r so that there is a shell crossing at some t > tB r for every r > 0. As seen from (18.16), at a shell crossing, where Rr = 0, a radial null geodesic has a horizontal tangent in the comoving coordinates. Consequently, all the curves passing through a shell crossing are timelike or null at the intersection point. The time of shell crossing in the E = 0 model is def t = tS r = tB + 2MtBr /Mr , where tBr > 0. Choosing the r-coordinate so that M = M0 r 3 , and assuming that tSr > 0, i.e. 5tBr + 2rtBrr > 0, we obtain that the curve t = tS r is timelike everywhere. Now consider a radial null geodesic k1 (given by the equation t = tn r) sent backwards in time from the observer’s position at t = tp  r = 0; see Fig. 18.12. It obeys dt/drn = −Rr < 0 in the whole spacetime region that is later than tS r. Since the curve t = tS r started also from r = 0 at an earlier time, and has a strictly positive derivative everywhere, the two curves must intersect somewhere, and tn r will have a zero derivative there. Let the point of intersection pis have the coordinates tis  ris . Consider another radial null geodesic k2 sent backwards in time from a point p2 of coordinates t2  r2 , where t2 > tis  r2 < ris , towards the centre of symmetry at r = 0. The function t = tn2 r describing that geodesic has a strictly positive derivative at every point at which tn2 r > tS r. Assume that the curves tS r and tn2 r are both differentiable for r ∈ 0 r2  and that the mass density is nowhere zero. It is then a simple exercise to prove that k2 cannot intersect tS r at any r obeying 0 ≤ r ≤ r2 . In brief, the argument is that at an intersection  point q of coordinates tq  rq  the derivative tn2 r would have to be zero and would have to go down to zero from positive values as r is decreasing. This means, when tn2 r would be approaching tn2 rq , the difference tn2 r − tS r would have to be increasing, and the intersection could not occur (see Exercise 14 for more details). Consequently, k2 will reach the centre at r = 0 at a later time than the central point of the Big Bang singularity, tB 0 (which coincides with the central point of the shell crossing, tS 0). Consequently, there was a period in the past of the observer O (with time coordinates t < T ) such that a signal sent out from the point t1  0 with t1 < T had enough time to proceed to the neighbourhood of the shell crossing, and then bounce back towards the observer, to reach him at t = tp . Such a period (i.e. such a value of T ) exists for every tp > tB 0. Hence, all the regions that the observer sees at tp could have been in causal 1

As observed by Celerier and Szekeres (2002), this not so much solves, but rather postpones the horizon problem. At a later time, the observer would still be able to see regions that had not been in causal contact at t = tls .

348

The Lemaître–Tolman geometry t O

k1

p

2

p

is

k2

SC B r

Fig. 18.12. A solution of the ‘horizon problem’ in an E = 0 L–T model with an increasing Big Bang (BB) function tB r (the form used in the picture is tB r = br 2 , where b = constant). The null radial geodesic k1 sent backwards in time from the observer’s position O hits the shell crossing SC at the point pis of coordinates t r = tis  ris . From a point p2 on k1 , of coordinates t2  r2 , with t2 > tis , r2 < ris , another radial null geodesic k2 is sent backwards in time towards the centre at r = 0. As explained in the text, k2 must hit the centre at a time later than the BB at r = 0 (the shell crossing set is in this example tangent to the BB set at r = 0). Consequently, all areas of the sky that the observer O sees at present had a chance to be in causal contact with a common source in the past. This solves the ‘horizon problem’ for as long as the observer has in the field of view the shell crossing set t = tS r with tS r > 0; the solution is permanent if tS r > 0 for all r > 0.

contact with a common source located in the observer’s past. This solution of the ‘horizon problem’ is not just a postponement; with tS r > 0 for all r > 0, the problem is avoided permanently. Note that the two rays in the construction remain in the region t > tS r, i.e. they never hit the shell crossing set. Hence, they remain all the time in the physical region of the spacetime. 18.18 * The evolution of Rt M versus the evolution of t M In the Friedmann models, the relation between the areal radius R and the mass density is simple: in any given model, the greater R, the smaller . In an L–T model, no such relation exists because of the possible existence of local condensations, as we will prove here.

18.19 * Increasing and decreasing density perturbations

349

From (18.23), at any fixed time t: R3 M − R0 3 =

6  M du   M0 u

(18.165)

where R0 is a (possibly time-dependent) constant of integration and M0 is another constant. Equation (18.165) means that the value of R at any M depends on the values of  in the whole range M0  M. Also the inverse relation in (18.23) is non-local – to find t M we need to know R in an open neighbourhood of the value of M. Assume now that 2 < 1 over the whole of M0  M. Then     6 M 1 1 − du > 0 (18.166) R2 3 M − R1 3 M − R0 3 t2  − R0 3 t1  =  M0 2 u 1 u Hence, R2 3 M > R1 3 M if R0 3 t2  − R0 3 t1  +

6 M  M0



1 1 − 2 u 1 u

 du > 0

(18.167)

This will hold if, for example, R0 ti  = 0, i = 1 2, in addition to 2 < 1 . The converse implication is simply not true. This is easy to understand on physical grounds: Rt2  M > Rt1  M for all M ∈ M0  M1  means that every shell of constant  has a larger radius at t2 than it had at t1 . However, the neighbouring shells may M =M  at t2 than they were at t1 . If they did, then a local condensation have moved closer to M  being larger than t1  M.  This  around M was created, which may result in t2  M does not happen in the Friedmann limit, where local condensations are excluded by the symmetry assumptions. A sufficient condition for 2 M < 1 M, M ∈ M0  M1 , is 

1  3

R1 M

>

1  3

R2 M

for all M ∈ M0  M1 

(18.168)

If RM > 0 for all M ∈ M0  M1  at both  t2 (i.e. there are no shell crossings in  t1 and M0  M1 ), then this is equivalent to R2 3 M > R1 3 M for all M ∈ M0  M1 . Incidentally, this implies R2 > R1 for all M ∈ M0  M1  if R2 M0  > R1 M0 .

18.19 * Increasing and decreasing density perturbations Formation of structures in the Universe used to be described by approximate perturbations of the Robertson–Walker models. In that approach, two classes of perturbations had been identified: those that increase with time and those that decrease with time. The same classification can be done in the L–T and Szekeres models (for the latter see Section 19.8). For the L–T model with  = 0, this approach was first applied by Silk (1977). His results are re-derived here, by a somewhat different method. The quantities used in studying perturbations of the Friedmann models are the density contrast r / and the curvature contrast R3 r /R3 , where R3 is the scalar curvature of

350

The Lemaître–Tolman geometry

the hypersurfaces t = constant. Both these functions vanish identically in the Friedmann limit. From (18.15) and (18.25) we find r R Mrr R − 2 r − rr  =  Mr R Rr

(18.169)

4REr  R2 Rr

(18.170)

R3 = − def

#K = =

R R3 r RErr R = − 2 r − rr 3 R REr R Rr Err /E − 2Rr 2 /R2 − Rrr /Rr  Er /E  Rr /R + Er /E

(18.171)

Since a perturbation with E = 0 would be rather exceptional, we assume E = 0. For E > 0, using (18.113)–(18.114) and (18.21), we find def

r =

Mr Er −  M E

def

r =

3 Er Mr −  2 E M

2E 3/2 tBr  M   Rrr R R r sinh  sinh  −  = r ++ + Rr Rr Rr cosh  − 12 def

r =

(18.172)

R 2 +  cosh  − 3 sinh   sinh  −  −  Rr cosh  − 13   Rr sinh  − + Rr cosh  − 12

+

+

R cosh  + 2  sinh  −  −   Rr cosh  − 13

(18.173)

We need to know the behaviour of r / and #K as  → 0 and  → in two cases: when tBr = 0 and when 2E3/2 /Mr = 0. For this purpose, we must know the behaviour in these limits of a few functions present in (18.169)–(18.171). Two of them are 3  and 4 , defined in (18.114); their relevant properties are given in (18.115). The other functions are (a coefficient at is meant to determine the sign): Rr Mr =  →0 R 3M lim

Rr E = r → R 2E lim

when tBr = 0

lim

Rr = −tBr ×  R

(18.174)

lim

Rr Mr = R 3M

(18.175)

→0

→

when 2E3/2 /Mr = 0

def 2 +  cosh  − 3 sinh sinh  − 

3  =

cosh  − 13



18.19 * Increasing and decreasing density perturbations

lim 3  = 0

lim 3  = 0

→

→0 def

4  =

351

(18.176)

cosh  + 2  cosh  − 13 lim 4  = 

lim 4  = 0

→

→0

2E3/2 Rr cosh  − 12 =− tBr  →0 R sinh  M

Rr cosh  − 12 = 0 →0 R

lim

lim

(18.177) (18.178)

With tBr = 0, we now find the following limits: lim

→0

Rrr Mrr 2 Mr = −  Rr Mr 3 M

lim

→

Rrr E E = rr − r  Rr Er 2E

(18.179)

With these, one finds that r / −−→ + , while →0

  Err 2Mr 2 Er Mrr 2Mr − − − E 9M 2 E Mr 3M  lim #K = →0 Mr /3M + Er /E

(18.180)

As  → , we obtain r Mrr Err Er − − =  →  Mr Er 2E lim

lim #K = 0

→

(18.181)

This shows that with tBr = 0 the perturbation of the Friedmann density vanishes at the initial singularity and tends to a finite limit as t → , i.e. it is increasing. The perturbation of curvature displays the exactly opposite behaviour. With 2E3/2 /Mr = 0, the limits are   lim r = +tBr × = lim #K lim r = 0 →  →0  →0   (18.182) Err 2Mr 2 Er Mrr 2Mr − − − E 9M 2 E Mr 3M lim #K =  → Mr /3M + Er /E so the perturbations generated by tBr are decreasing. Now we repeat the calculations done in (18.171)–(18.182) for the E < 0 model. Since infinities will now appear both in Rrr /Rr and in Rr /R; we have to substitute for these quantities before taking the limits. Using (18.15), (18.19), (18.107)–(18.109) and (18.172) we find   r Mrr r R R r sin  − sin  = − − 3 − + 3  Mr Rr Rr 1 − cos 2 R −2 −  cos  + 3 sin  ×   − sin  −  Rr 1 − cos 3   Rr sin  + + Rr 1 − cos 2

−

352

The Lemaître–Tolman geometry

−

R cos  + 2   − sin  −   Rr 1 − cos 3

#K = −2

Rr Err /E − Er /E r / − Mrr /Mr  +  R Rr /R + Er /E

(18.183) (18.184)

Here we give some useful limits. For tBr = 0: Mr Rr =  →0 R 3M lim

  3Er Mr Rr =− − ×  →2 R 2E M lim

(18.185)

and for 2E3/2 /Mr = 0: Rr = −tBr ×  →0 R lim

Rr = tBr ×  →2 R lim

(18.186)

Other functions and limits are: def −2 −  cos  + 3 sin  − sin  1  =  1 − cos 3 lim 1  = 0

→0 def

2  =

cos  + 2  1 − cos 3

lim 1  = − 

→2

lim 2  = lim 2  = 

→0

→2

(18.187) (18.188)

In calculating the limits of the contrasts with  = 0, we observe that 1 /1  −→ 0, →2

so the behaviour of the whole function at  → 2 is determined by the term containing 1 . Other useful limits are: Rr 1 − cos 2 −2E3/2 =− tBr = − →0 R sin  M lim

lim

→0

(18.189)

Rr Rr 1 − cos 2 = 0 = lim 1 − cos 2  →2 R R

(18.190)

Rr 1 − cos 2 = 2 −  →2 R sin 

(18.191)

lim

Now, when tBr = 0 =⇒  = 0), we find lim→0 r / = 0 and lim→2 r / = + . Thus, the gradient of −2E3/2 /M generates a perturbation of the Friedmann model that vanishes at the initial singularity and increases without limits at the final singularity. With −2E3/2 /Mr = 0, the density contrast tends to infinity at both singularities. In this case, the time-difference between the bang and the crunch singularities is constant: def tC − tB = 2/B, where B = −2E3/2 /M = constant. Thus, it is impossible to fulfil both of (18.110)–(18.111) and shell crossings are unavoidable. For #K we obtain the following results. With tBr = 0  = 0): lim #K = −

→0

2Mr Err /E + Er Mrr / EMr  +  3M Mr /3M + Er /E

lim #K = ×

→2

(18.192)

18.20 * L&T curio shop

353

(only the first term in (18.184) is infinite). With −2E3/2 /Mr = 0  = 0), the limits are − lim #K = lim #K = tBr ×  →0

→2

(18.193)

Thus, the gradient of −2E3/2 /M generates increasing perturbations of the Friedmann curvature contrast, while the gradient of tB generates perturbations that increase without limits at both singularities.

18.20 * L&T curio shop In this section, a selection of material will be presented that did not fit under any other heading in this chapter. A complete overview of such papers until 1994 can be found in Krasi´nski (1997).

18.20.1 Lagging cores of the Big Bang Novikov (1964a) used a similar setup to that of Bonnor (1956) (see Section 18.6) to describe the lagging cores of Big Bang (BB). He considered the flat Friedmann model with several Schwarzschild holes in it, matched into the background. Inside each hole there was a small expanding Friedmann region that had its local BB later than the general BB of Friedmann Universe. Particles and radiation emitted from such lagging cores of BB should in principle be observable. The hope was that this could explain the source of energy in quasars, but this attempt has had almost no following, except the paper mentioned below. Neeman and Tauber (1967) considered more possibilities for matter inside the core: it could be either the Friedmann dust or the so-called stiff fluid (equation of state  = p), both with or without  = 0. However, in every case there were difficulties to reconcile the parameters of the model with the results of observations in a self-consistent way. Miller (1976) described a Universe with the L–T geometry and with E = 0 =  tBr < 0 gradually emerging from the BB singularity. With the BB first occurring far from the centre and proceeding inwards, one can assign mass to the singularity and interpret it as the mass to be emitted from it. The mass of the singularity is the function Mr from (18.14) calculated at r = rB t, where rB t is the inverse function to tB r; it is well behaved on the singularity. When the BB reaches r = 0, the singularity may either disappear or continue to exist with a negative mass and still emitting matter. In the second case it becomes a permanent timelike singularity.

18.20.2 Strange or non-intuitive properties of the L–T model Novikov (1962a) showed that, with some choices of the arbitrary functions in the L–T model, adding some amount of rest mass to a source may decrease the active gravitational

354

The Lemaître–Tolman geometry

mass. The model used (a Friedmann region going over into the Schwarzschild spacetime through an interpolating L–T region) was specified numerically, and the effect was demonstrated only for a definite amount of mass added. Novikov’s interpretation: ‘The (negative) potential energy of gravitational interaction between the medium added and the one present previously is greater than the energy corresponding to the mass of the medium added. This leads to a decrease of the total gravitational mass.’ The effect is an example of what happens beyond the neck (see Section 18.10): adding more rest mass results in reducing the total active mass. By another numerically specified example Novikov showed that an infinite amount of added rest mass may leave the active mass still finite. Hellaby and Lake (1985) presented a few more examples that run counter to the intuitions based on the properties of the R–W models: 1. A model with E > 0 everywhere that has a globally closed space. 2. A model with E < 0 everywhere that has an open space. 3. A region of negative curvature placed between two regions of positive curvature, yet it does not develop shell crossings. The first situation occurs when, for example: M = M0  m 

E = E0  2m/3 

tB = −a0  p 

(18.194)

where M0  E0  a0  m and p are positive constants, and def

r = 3 sinr/l + 2 sin3r/l

(18.195)

l > 0 being one more constant. Note that 0 = 0 = l, and r > 0 for all 0 < r < l. The function r has local minimum at r = l/2 and two local maxima, √ a (positive) √ at r = r1 = l arcsin 3/2 2 and r = r2 = l − r1 . For this model, 2E3/2 /M = def

2E0 3/2 /M0 = C = constant, and, from (18.19): Rt r =

M0 m/3  cosh  − 1 2E0

sinh  −  = Ct + a0  p 

(18.196)

Thus, for all t > tB  R = 0 at r = 0 and at r = l, and R > 0 for 0 < r < l. Consequently, Rt r must have, at every fixed t, at least one local maximum. We have

sinh  m m/3−1 p−1  r  cosh  − 1 + Ca0 p (18.197) Rr = 3 cosh  − 1 Since both terms in square brackets are positive for r ∈ 0 l Rr can vanish only where r does, i.e. the maximum of Rt r at fixed t must coincide with one of the extrema of r. Since R = 0 at two different values of r for each t, each space t = constant has two origins and a finite radius. Still, at every r the space expands to infinite size as t → . Hence, the model has closed spaces, but is ever-expanding – a situation that cannot happen in the Friedmann models with  = 0. The second situation occurs in the spacetime discussed in Section 18.9. Hellaby and Lake’s example had similar qualitative properties.

18.20 * L&T curio shop

355

The third situation, an ever-expanding region sandwiched between two recollapsing regions, occurs with the following functions: E = E0 r 2 l − r2 br − 1bl − r − 1 M = M0 r 3 l − r3 

tB = −a0 rl − r

(18.198)

where l > 0 and b > 2/l are constants. The three functions have vanishing derivatives by r at the same three values: r = 0 r = l/2 and r = l. All three vanish at r = 0 and def def r = l, while Er has two additional zeros, at r = r1 = 1/b and at r = r2 = l − 1/b. We have Mr > 0 for 0 < r < l Er > 0 for r1 < r < r2 and Er < 0 for 0 < r < r1 and for 0 < r < r2 . From the behaviour of Er it follows that it has minima in 0 r1  and r2  l, and a maximum in r1  r2  at r = l/2. In order to render the model physical, we have to ensure that Er ≥ −1/2 for all r ∈ 0 l and that there are no shell crossings. The minima of Er occur at r = r34 =

1 l ± 3 3b2 l2 − 8bl + 8 2 6b

(18.199)

and at both of them E has the same value Emin = −4E0 /27b4 bl − 13 . Thus, the condition E ≥ −1/2 implies that E0 <

b4 27  8 bl − 13

(18.200)

With the functions (18.198), the no-shell-crossing conditions in the E > 0 region are fulfilled, we have tBr < 0 Mr > 0 and Er > 0 for r < l/2; tBr = Mr = Er = 0 for r = l/2; and tBr > 0 Mr < 0 Er < 0 for r > l/2. In the E < 0 region, (18.111) has to be fulfilled for r < l/2, and its opposite for r > l/2. No additional restrictions on the constants come from this requirement, since these conditions are fulfilled automatically; the left-hand side of Eq. (18.111) is equivalent to 3b2 +

3/2 2E0 3/2  2 2 2r − l a0 b r + b2 lr + bl − 1 M0

(18.201)

The trinomial in r is positive for all r ≥ 0, the expression in square brackets is thus positive, while the factor 2r − l ensures the correct overall sign of the whole expression in the ranges r < l/2 and r > l/2. Just like the spacetime (18.194)–(18.196), the one specified in (18.198) has two centres, one at r = 0 and the other at r = l Er is negative in the vicinity of each centre and positive around r = l/2. Thus, each of the two E < 0 regions recollapses onto a different centre, and this is why the ever-expanding region between them can exist without shell crossings ever being created.

356

The Lemaître–Tolman geometry t

r r=l

r = 1/ b

r = l – 1/ b

Fig. 18.13. A map of the graph showing the evolution of the t r subspace in the model given by (18.198). The thin lines are contours of constant values of R. The differences in R between consecutive contours are the same everywhere. The curve at the bottom is the Big Bang, the two curves bordering the surface on the right and on the left together form the Big Crunch. The two thick lines, at r = r1 = 1/b and at r = r2 = l − 1/b, separate the region with Er > 0 (between them) from the regions with Er < 0. For r < r1 and r > r2 , the lifetime of the model is finite, although it tends to infinity as r approaches r1 or r2 . The short straight segments at r = 0 and at r = l are the two centres of spherical symmetry.

Figure 18.13 shows the evolution of the t r surfaces in this model. At r = 0 r = r1 = 1/b r = r2 = l − 1/b and at r = l the r = constant shells evolve by the E = 0 law. For every 0 < r < r1 and for every r2 < r < l, the evolution proceeds by the E < 0 law, and that part of the space recollapses after a finite time T , with T → as r → r1 or r → r2 . For r1 < r < r2 , the evolution proceeds by the E > 0 law.

18.20 * L&T curio shop

357

18.20.3 Chances to fit the L–T model to observations Mészáros (1986) considered the implications of the assumption that the observed part of the actual Universe is described by a finite-volume portion of the L–T model with a simultaneous Big Bang. There are two chances of confirming this assumption observationally: (1) by observing the outer surface of the L–T sphere; (2) by detecting the cosine anisotropy in the matter-density and in the Hubble parameter. There is no observational evidence for point (1). As for point (2), Mészáros noted the following: (I) Observations of matter-density are inconclusive. (II) The Hubble parameter and the temperature of the microwave background radiation do reveal cosine anisotropies. They are usually explained away as resulting from the motion of the Solar System around the Galaxy. However, the directions and magnitudes of the velocities calculated from the two effects are inconsistent. This inconsistency is a problem in a Robertson–Walker model, but it can be accounted for on the basis of an L–T model. Unfortunately, the precision and interpretation of the observations are questionable. The quadrupole anisotropy of the background radiation is much simpler to explain in an L–T model than in a Friedmann model. Mészáros concluded that there are more arguments for the L–T models than against them, but present observations are inconclusive.

18.20.4 An ‘in one ear and out the other’ Universe Hellaby (1987) presented a few illuminating examples of nontrivial L–T geometries and topologies. One of them, called ‘In one ear and out the other’, has the geometry shown in Fig. 18.14. The coordinate r is allowed to assume negative values. For r ≤ −E1 , where E1 > 0 is a constant, the model has E ≥ 0 E = 0 at r = −E1  and collapses from past infinity to the Big Crunch that has a finite value at all 0 > r > − . For −E1 < r < E2 (where E2 > 0 is another constant), E is negative, so the model has both a Big Bang and a Big Crunch at finite times. For r ≥ E2 , the model has E ≥ 0 again (with E = 0 at r = E2 ), and expands from the Big Bang in the finite past to infinity.1 In the range r ≤ 0, the L–T arbitrary functions are   1 1 Er = − 1 − r 2 /E1 2  M0 − M1 r 3  2 2   3 2 1 2 tC r = M0 1 + r /E1  2 2

Mr =

The function tC r is the crunch time, and the bang time is    M0 − M1 r 3 tB r = tC r −  3/2  1 − r 2 /E1 2

(18.202)

(18.203)

Thus, as seen in Fig. 18.14, the bang time goes down to − as r → E1 . 1

The configuration presented here is a slight generalisation of that used by Hellaby, who considered the case E1  M1  = E2  M2 .

358

The Lemaître–Tolman geometry r = E2

crunch

AH

+

+

AH

t=0 AH

–

AH

t

–

bang

r r = – E1

r = 0, the neck

Fig. 18.14. The spacetime diagram for the L–T model of Eqs. (18.202)–(18.205). It has past timelike infinity for r ≤ −E1 < 0, a finite lifetime for −E1 < r < E2 and future timelike infinity for r ≥ E2 > 0. There is a neck at r = 0, where the past and future apparent horizons touch each other. In the figure, the time along AH+ tends to − as r → − , and so does the time along AH− as r → + . Whether these times go to + or − depends on the numerical balance between the various constants; see Exercise 15.

In the range r ≥ 0, the functions are   1 1 Er = − 1 − r 2 /E2 2  M0 + M2 r 3  2 2   3 2 1 2 tB r = − M0 1 + r /E2  2 2

Mr =

The crunch time corresponding to the Big Bang at t = tB r is    M0 + M2 r 3 tC r = tB r +  3/2  1 − r 2 /E2 2

(18.204)

(18.205)

and it goes up to + as r → E2 . There is a neck at r = 0, where the past and future apparent horizons touch each other. As we observed in Section 18.8, Eq. (18.86), an outgoing future apparent horizon can never be timelike, and can be null only in vacuum. Since we are considering here a model that is not vacuum anywhere, the future apparent horizon in Fig. 18.14 is

18.20 * L&T curio shop

359

everywhere spacelike. This observation is sufficient to see that no light ray can be sent from the left part of the spacetime between AH− and AH+ to the right part between AH− and AH+ : a light ray that would touch any point of the future apparent horizon would immediately pass inside it. This is in contrast to the Schwarzschild spacetime, in which, as seen from the Kruskal diagram (Fig. 14.6), it is possible to send light rays along the apparent/event horizon. Thus, as stated by Hellaby (1987), in the L–T spacetime the communication between the opposite sides of the neck is even worse than in the Schwarzschild spacetime. However, it is possible to receive a light ray that originated behind the neck before the AH− .

18.20.5 A ‘string of beads’ Universe Another of Hellaby’s (1987) illuminating examples is a ‘string of beads’ model. This is a chain of recollapsing L–T regions, each of which begins in a separate Big Bang (BB), then they become connected by necks, and then split to end their lives in separate Big Crunches (BCs), see Fig. 18.15.1 In our example, for simplicity, the BC is a mirror image of the BB. In general, in order to have necks without shell crossings, the minima of the BC must have the same radial coordinates as the maxima of the BB, but otherwise the BB and BC can be arbitrary. The L–T functions in Fig. 18.15 are: M 2  Mr = M0 + M1 e−ar cosbr 3/2 −2E (18.206)  1 2 −ar 2 Er = − 1 − E1 e sin br  2 where M0  a b and E1 are arbitrary positive constants, subject to the conditions that M > 0 and −1/2 ≤ E < 0 everywhere. The corresponding crunch function is tC r = M/−2E3/2 . The space extends infinitely far in all directions. This Universe has no centre of symmetry. It begins its existence in a series of (non-simultaneous!) explosions, each of which creates a bubble of spacetime isolated from the others. Inside each bubble, the BB is going on for some time, and it ends when the bubble becomes connected to a neighbouring bubble by a neck. At a certain time te (different for each bubble), the BB expires. After the last BB is over, the Universe becomes a chain of spacetime regions connected by necks. Later, the BC sets in, also at a different time for each bubble. The Universe splits again into unconnected bubbles, each of which gradually collapses into its own final singularity. tB r = −

18.20.6 Uncertainties in inferring the spatial distribution of matter Partovi and Mashhoon (1984) calculated various cosmologically relevant parameters for two types of a spherically symmetric inhomogeneous spacetime: one with a perfect fluid 1

Again, our example is a slight generalisation of that presented by Hellaby, who considered ‘beads’ isometric.

360

The Lemaître–Tolman geometry t

r

Fig. 18.15. A ‘string of beads’ Universe. The lower curve is the Big Bang (BB); the upper curve is the Big Crunch (BC). The Universe begins its existence as a chain of unconnected bubbles. The dotted line shows the time by which four bubbles already exist, and for the fifth and sixth the BB just begins. The horizontal line shows the time by which the two central bubbles have completed their BBs. The vertical lines show the positions of three of the necks. (At the local minima of the BB, which are the local maxima for the BC, there are no necks because E = −1/2 there.)

source and a barotropic equation of state, the other with a dust source. The quantities are calculated in terms of successive powers of the redshift around the values in a R–W background. It was found that the leading terms in z are identical to the R–W terms, while the next following terms are formally modified, but in such a way that the inhomogeneous corrections cannot be properly read out from the formulae, and may lead to assignment of incorrect values to the standard cosmological parameters. The conclusion is that up to those following terms these inhomogeneous models are observationally indistinguishable from the R–W models. Kurki-Suonio and Liang (1992) used the L–T model to demonstrate the ambiguity in reading out the spatial distribution of matter from redshift measurements. What the astronomers can directly measure is the number of light sources in a given solid angle and a given redshift interval, i.e. the density of matter in the redshift space. Lacking any information about its geometry, the redshift space, in which z is the radial coordinate, is assumed flat. Let us assume that the observer is at the centre of symmetry at z = 0, and let Nz be the mass contained in the sphere of radius z around the observer in the

18.20 * L&T curio shop

361

redshift space. This mass is the sum of rest masses defined in (18.17), √and, from (18.18), is related to the mass function Mr of the L–T model by Nr = Mr / 1 + 2E. We define the mass density in the redshift space, 

z, by  z 3 2 c H0 2

z dz  Nz = 4z  (18.207) G 0 The coefficients are there in order to provide convenient units; H0 is the current value of the Hubble parameter at the observer’s position. Thus c 2 H0 3

z Nz = 4z2 G

(18.208)

But Nz = Nr /zr . Substituting for Nr from (18.17)–(18.18) and for zr from (18.125) we obtain 2H0 3 Mr H0 3 R2 Rr 

z = 2 =

r (18.209) c 1 + zz2 Rtr 1 + zz2 Rtr where r is the physical mass density. The values of t and r refer to the time and position of emission. Equation (18.209) connects one observed quantity, 

z1 + zz2 , to two unknown functions, Mr and Rt r, and obviously cannot determine both. The authors investigated numerically the dependence of these functions on 

z with various shapes of tB r Er and initial density distributions t r. They assumed no shell crossings Rr > 0 and redshifts monotonically growing with distance Rtr > 0. The results, greatly abbreviated, are as follows: 1. If tB r = constant, then the amplitudes of overdensity in the redshift space are larger than the amplitudes of proper density by 40% or more. The overdensity regions in proper density have larger sizes than their images in the redshift space. 2. When Mr/r 3 = constant and Er/r 2 = constant, that is, when the bang-time function is the only factor generating inhomogeneity, overdensities in the redshift space translate into underdensities in proper density, of larger size and much larger amplitude. 3. Since the two effects influence observations in opposite directions, they can momentarily cancel each other, producing a homogeneous density in the redshift space while the Universe is highly inhomogeneous. Conversely, the Universe may be momentarily very smooth in density, but can appear highly inhomogeneous in the redshift space because of the effects of inhomogeneous velocities. To illustrate this last possibility, Kurki-Suonio and Liang fitted the velocity function in the L–T model so that the proper density is constant on the past light cone, while the density in redshift space is the same as in one of the deep-redshift observational surveys. The proper density at the present time then has smaller amplitudes in the peaks and a less regular distribution of the peaks. The authors concluded that using the R–W relation between the redshift and the comoving distance to describe inhomogeneities is ‘fundamentally self-inconsistent’. They said, further: ‘What we see on the past light cone are only momentary “images”.’

362

The Lemaître–Tolman geometry

Kurki-Suonio and Liang’s paper contains several graphs and spacetime diagrams that illustrate the conclusions more clearly. In particular, they show how the bang-time non-simultaneity generates decaying inhomogeneities while variations in initial energy generate growing inhomogeneities, even though these processes are not discussed in the paper. 18.20.7 Is the matter distribution in our Universe fractal? Ribeiro (1992a) defined a fractal distribution of matter by requiring that the number of objects Nc and luminosity distance dl to the surface of the sphere containing the Nc objects are connected by Nc = &dlD , where & is a constant and D is the fractal dimension of the distribution. In a sequel paper (Ribeiro, 1992b), the author calculated the density versus distance function along the past light cone in the k = 0 Friedmann model. This function is not constant and does not seem to agree with the observations. Ribeiro stressed that cosmological models should be tested in precisely this way. For the k = 0 Friedmann model this function does not possess any features of a fractal distribution of mass. In the third paper, Ribeiro (1993) showed that the density versus distance relation measured along the past light cone in the k = 0 Friedmann models is not homogeneous either, nor is it fractal. However, the functions Er Mr and tB r in the L–T model can be chosen so that Nc = &dlD . Ribeiro found several examples of such functions by numerical experiments. In most of the examples, either the Hubble law is contradicted or the Hubble constant is smaller than the astronomers currently believe it should be. The only example that yields acceptable parameters is 2Er = sinh2 r 2Mr = r p  t0 r = lne 0 + 1 r. If  = 10−4  p = 14 0 = 36 and 1 = 1000; then the implied fractal dimension is D = 13, the Hubble constant is H = 61 km s−1 Mpc−1 , and & = 54 × 105 . Even better agreement with observations follows when 1 = 0; then D = 14 and H = 80 km s−1 Mpc−1 . Ribeiro emphasised that no positive observational evidence of spatial homogeneity of the Universe is available. Should it be available, it would actually rule out the Friedmann models because the light cones in them intersect hypersurfaces of different densities. 18.20.8 General results related to the L–T models Novikov (1962b) proved the following theorems for a general spherically symmetric spacetime: 1. If limr→r0 Rt0  r = for a certain t0 (the r0 may be infinite), and for r > r1 the matter-density  ≥ A/8R2 , where A = constant > 1, then there exists an r2 such that the points with r > r2 and t = t0 are in the T-region.1 2. For every r = r2 there exist such t1 and t2 (dependent on r2 ) that the points with t r2  where t1 < t < t2 are in the T-region.2 3. There exists a solution for which the volume of a finite mass 1 2

For the definition of the T- and R-regions, see Section 14.1. This means that with sufficiently high density the spheres t = constant r = constant will not be static to any observer. This means that each matter particle remains in a T-region for a period of time – in the vicinity of the Big Bang singularity.

18.21 Exercises

363

goes through a nonsingular minimum and the minimum is simultaneous for the whole space. 4. The same is possible for an infinite mass. 5. There exists a solution in which a volume minimum occurs at small distances from the centre, and, at the same  instant, a volume maximum occurs at large distances from the centre. 6. If Mr =  dV grows r with r faster than the affine radius l = 0 −g11 1/2 dr  , and does so for a sufficiently large interval of l, then the configuration cannot be static. 7. If Mr grows faster than lr over a sufficiently large interval of monotonic growth of R, then the volumes of different shells cannot go through an extremum simultaneously. 8. If the surface of a spherical ball is in a T-region and is shrinking, then, in a finite proper time, it will shrink to a point; if the surface is in a T-region and is expanding, then it started its expansion from a point. Finally, Novikov calculated the position of the boundary between the R- and T-regions in a Friedmann model and concluded that the radio sources observed must lie in the T-region. Consequently, they seem to have emerged from a point. The properties listed above reveal what should be expected from exact solutions generalising the L–T model for pressure with nonzero spatial gradient. A later paper by Novikov (1964b) is a continuation of the one described above. One of its new results is that in the Schwarzschild solution the boundary between the R- and T-regions is the r = 2m event horizon, and such boundaries also exist for the Kottler (i.e. Schwarzschild with  = 0) and Reissner–Nordström solutions. Another result was discussed in Section 14.12 (Eqs. (14.116)–(14.117) and Exercise 10 in Chapter 14). In a series of papers, Dautcourt (1980, 1983a,b, 1985) developed a new approach to integrating the Einstein equations that is better suited to incorporating observational results into cosmological models. In this approach, the initial data are given on the past light cone of a single event in the spacetime, and then the Einstein equations are integrated off that cone to the future. The first paper (Dautcourt, 1980) is a short exposition of the ideas of the other papers. In the second paper (Dautcourt, 1983b) the author gave a prescription for integrating the Einstein equations in vacuum and for dust with the initial data given on the past light cone of an observer. The Einstein Universe and the Friedmann models were used as illustrations. In the third paper (Dautcourt, 1983a) the author described the ideal observations needed to determine the initial data. In practice, several of those observations are beyond the limits of current technology. In the last paper (Dautcourt, 1985), the author noted that the observable quantities introduced in the preceding papers depend on the 4-velocity of the observer, and proposed a preferred set of coordinates with a simple relation to the observable quantities and a simple transformation law under a Lorentz rotation of the observer. Dautcourt’s approach was later developed by Ellis and coworkers; the paper by Stoeger, Ellis and Nel (1992) mentioned in Section 18.3 is one entry in that series. 18.21 Exercises 1. Prove that if the spacetime is spherically symmetric and the metric obeys the Einstein equations with a perfect fluid source, then the rotation is necessarily zero. 2. Prove that u˙  = 0 in (18.1)–(18.2) implies Cr = 0.

364

The Lemaître–Tolman geometry

3. Prove that Eqs. (18.24) are the necessary and sufficient conditions for the L–T model to reduce to the Friedmann limit. Hint. Use M as the radial coordinate. Calculate R3 MM in (18.23) separately for each sign of E. With E = 0, observe that the Jacobian M /M t = t = 0. Hence, M and  can be chosen as the independent variables. Eliminate t − tB  from R3 MM using Eqs. (18.19) and (18.21). What will result will be a polynomial in functions of  with coefficients depending on M only. Equate to zero the coefficients of independent functions of . In order to show that (18.24) do indeed define the Friedmann model, change the radial variable to r = M/M0 1/3 and substitute whatever you have found in the metric (18.16), then compare the result with (17.1) and (17.33)–(17.35). 4. Transform the L–T metric to the curvature coordinates. Hint. Note that, from (18.14), Rr dr = dR − Rt dt = dR − l 2E +

2M 1 − R2 dt R 3

(18.210)

where l = +1 for expanding and l = −1 for collapsing models. Then transform t by t = fT R and demand that gTR = 0. This implies: 1 f =− R 1 − 2M/R + 31 R2

2E +

2M 1 − R2  R 3

(18.211)

Now M and E are functions of rT R and the metric becomes ds2 =

  2M 1 f2T 1 1− + R2 dT 2 − dR2 1 + 2E R 3 1 − 2M/R + 13 R2   −R2 d 2 + sin2  d2 

(18.212)

The functions E and M obey the equations 0 = MT Tt + MR Rt 

0 = ET Tt + ER Rt  

 ft fR  rT rR Prove that Eq. (18.45) is the necessary and sufficient condition for the existence of a solution of H x = 0 at x = 0, where H is given by (18.44). Prove also that only one such value of x exists. Hint. Calculate dH x/dx and consider how it changes. Prove that (18.48) are the necessary and sufficient condition for the existence of a solution of X x = 0 at x = 0, where X is given by (18.46). Prove also that only one such value of x exists. Verify that Eqs. (18.60) and (18.63) are indeed the sets of necessary and sufficient conditions for the existence of the appropriate evolutions. Interpret the results (i.e. why the time-difference has this time to be sufficiently large in (18.60) and sufficiently small in (18.63)). Prove that for a Friedmann model with  = 0 (in which also p = 0) the parameter B given by (18.85) is always equal to −2, and so the apparent horizons in it are timelike. Derive Eq. (18.104) for the E > 0 and E < 0 L–T models.

where Tt = T/t is found as an element of the matrix inverse to 5.

6. 7.

8. 9.

(18.213)

18.21 Exercises

365

10. Prove that Eqs. (18.106), (18.110) and (18.111) are sufficient conditions for avoiding a shell crossing when Rr > 0. Hint. Note that (18.110) and (18.111) imply Mr 3 Er >  M 2 E

(18.214)

i.e. that the coefficient of 1  in (18.107) is negative. Then write Eq. (18.111) as follows:    3 Er Mr 2 −2E3/2 Mr + − − + 1  − tBr 2  (18.215) f = 3M 2 E M 3 M Next, note that f is evidently positive for all  ≥  in consequence of (18.106), (18.110) and (18.214). Thus, it remains to investigate f in the range 0 . The first and third terms in (18.215) are positive. The first factor in the second term is negative. Show that d1 3 sin  −  cos  − 2 = d 1 − cos 2

(18.216)

is negative for  ∈ 0 . Since lim→0 1 = 2/3 and 1  = 0, this means that 1  < 2/3 for  ∈ 0 . This proves that the middle term in (18.215) is positive, too, for  ∈ 0 . 11. Prove that Eq. (18.126), is equivalent to (16.20). Hint. With the coordinates of (18.16), Eq. (16.20) can be written as 1 + z = k0 e /k0 o . Keeping the observer at a fixed position, take the logarithmic derivative of this by r and compare the result with (18.125). The conclusion is k0 r R Tr r  = tr k0 1 + 2Er

(18.217)

Integrating this and using (18.119) we obtain (18.134). Verify that this field is affinely parametrised (note that the integral is calculated along a null geodesic, so the integrand is a function of r only). 12. The metric (18.160) is invariant under the transformations t = e t, r  = e r, where  is the group parameter. Verify that their generators, k = t 0 + r 1 , obey (8.55) with = 2. 13. Verify that if the curve t = Dr,  = constant  = constant in the spacetime with the metric (18.160) is null, then it is necessarily a geodesic (but the parametrisation by r or t is nonaffine!). 14. Prove that the light ray k2 sent backwards in time towards the centre of symmetry from the point p2 in Fig. 18.12 can never intersect the shell crossing set if the following assumptions are made: (a) The functions t = tn2 r (describing the light ray k2 ) and the shell-crossing function t = tS r are differentiable for r ∈ 0 r2 . (b) tS r > 0 for r ∈ 0 r2 . (c) Rr > 0 for all t > tS r. (d) The mass density is nowhere zero. Hint. Here is one suggestion of a proof. Since tS r > 0 for r ∈ 0 r2 , there exists a minimal value M > 0 of tS r in this range, so tS r ≥ M for r ∈ 0 r2 .   If k2 should intersect tS r at some r1 ∈ 0 r2 , then tn2 r2  = 0 and tn2 −−→ 0, while r→r1

 tn2 r > 0 for r > r1 (by virtue of assumption (c)). Hence, for every 0 <  < M there exists  such a  > 0 that 0 ≤ tn2 r <  < M if r1 ≤ r < r1 + .

366

The Lemaître–Tolman geometry Since tn2 r starts from t2  r2  with a value tn2 r2  > tS r2 , assume that tn2 r1 +  > tS r1 +  and compare tn2 r1  with tS r1 . By virtue of the statements made we have tS r1  < tS r1 +  − M

tn2 r1  > tn2 r1 +  − 

tn2 r1  − tS r1  > tn2 r1 +  − tS r1 +  + M −  > tn2 r1 +  − tS r1 +  Thus, whenever k2 would be approaching the horizontal direction, it would be receding from the shell crossing rather than intersecting it. In order that k2 can intersect the shell crossing set, it would have to either (1) change abruptly from past-directed ingoing to past-directed outgoing, which is prohibited by assumption (a), or (2) become vertical and then past-directed outgoing. However, at the point where the tangent to k2 would be vertical, Rr would go to infinity, making the mass density zero, which is prohibited by assumption (d). Hence, k2 and tS r cannot intersect between r = 0 and r = r2 . 15. Calculate the equations t = tAH r of the apparent horizons for the model (18.202)–(18.205). Show that for the past AH tAH −→ r , where r = ±1 and the sign of r is the sign of r→+

2M2 E2 3 − M0 /2. Show that for the future AH tAH −→

r→−

l ,

where

l

= ±1 and its sign is

the sign of M0 /2 − 2M1 E1 . 16. Let the mass density in the L–T model (18.15) be a differentiable funciton of r. Prove that the spatial extrema of density in the E = 0 models are comoving only when the following equations are fulfilled at the extremal values:    

2E 3/2

2E 3/2 r = rr = tBr = tBrr = 0 M M (18.218)

 3  1 M   = 0 E 3 r Mr r 3

Find the corresponding condition for the E = 0 model. Note. The fact that the extrema are comoving only under the conditions (18.218) means that in general they are not comoving. Thus, they move across the flow lines of dust. This phenomenon is known in cosmology as density waves. Their existence in relativistic models was predicted by Ellis, Hellaby and Matravers (1990) by methods of the linearised Einstein theory. Note also that the first four conditions mean that at the extremum the L–T model has a second-order contact with the Friedmann model that approximates it. Hint. Choose M as the spatial coordinate. The first four conditions do not change then, but the   last one takes the more readable form M 3 /E 3 MM = 0. The extrema are at those values of M  3 where M = 0, i.e. R MM = 0. Then proceed as in Exercise 3. If the extrema are comoving, then the values of M obeying (18.218) do not depend on t.

19 Relativistic cosmology IV: generalisations of L–T and related geometries

19.1 The plane- and hyperbolically symmetric spacetimes The L–T models considered in the previous chapter have 2-spheres as orbits of their symmetry groups. Do there exist spacetimes whose symmetry orbits are surfaces of zero or negative constant curvature? A surface of zero curvature has the local geometry of a plane, whose symmetries in the Cartesian coordinates x y z are x  y  z  = x + a1  y z

x  y  z  = x y + a2  z

x  y  z  = x cos a3 + y sin a3  −x sin a3 + y cos a3  z 

(19.1)

where a1  a2 and a3 are the group parameters; a1 and a2 are arbitrary, while 0 ≤ a3 ≤ 2. Proceeding just as in Section 8.9, we find that a 4-dimensional metric for which (19.1) is the symmetry group is   ds2 = t rdt2 + 2t rdt dr + t rdr 2 + t r dx2 + dy2

(19.2)

Spacetimes with this symmetry group are called plane symmetric. Then, proceeding as in Section 18.1, we prove that in such a spacetime rotation must be zero, so comoving–synchronous coordinates can be introduced, in which the metric becomes similar to (18.1):   ds2 = eCtr dt2 − eAtr dr 2 − R2 t r dx2 + dy2

(19.3)

  The curvature tensor of a sphere, R2 d 2 + sin2  d 2  R = constant, is R  = R−2   

(19.4)

where 1/R2 > 0 is the constant scalar curvature. We can make the curvature negative by the complex transformation  = i   R = iR . Thereafter, the 2-metric becomes (with primes dropped)   (19.5) ds2 = R2 d 2 + sinh2  d 2  367

368

Relativistic cosmology IV

2 3 and its curvature tensor is R  = −R−2   . We choose x  x  =   as coordinates in the spacetime. The Killing fields are then

k = sin  2 + cos coth   3  1

k = cos  2 − sin coth   3  2

k  =  3 

(19.6)

3

and we require these to be the Killing fields for the whole spacetime. Solving the Killing equations with (19.6) we find the metric   ds2 = t rdt2 + 2t rdt dr + t rdr 2 + t r d 2 + sinh2  d 2  (19.7) where    and are arbitrary functions. These spacetimes are called hyperbolically symmetric because the orbits of their symmetry group have several properties in common with two-sheeted hyperboloids. Once again, we prove that in such a spacetime rotation must be zero, and we introduce the comoving–synchronous coordinates, in which   ds2 = eCtr dt2 − eAtr dr 2 − R2 t r d 2 + sinh2  d 2

(19.8) The surface with the metric (19.5) cannot be embedded in a Euclidean 3-space – the 3-metric must have the signature + + −. To verify this, consider (19.5) embedded in a flat 3-space, draw an orthogonal geodesic through each point of the surface, take the affine parameter r on the geodesics as the x1 -coordinate in space, let r = R on the initial surface and let the surfaces R = r = constant have the geometry of (19.5) with different values of R. In such coordinates, the 3-space metric will be   ds3 2 =  dr 2 + f 2 r d 2 + sinh2  d 2  (19.9) where  = ±1, to allow for different signatures. The Riemann tensor for the metric (19.9) can vanish only when  = −1, and fr r = 1. The symmetry groups of the spherically, plane- and hyperbolically symmetric spacetimes have 2-dimensional orbits. However, the groups themselves are 3-dimensional, so their algebras can be classified by the Bianchi method of Chapter 10. The algebras of spherical, plane and hyperbolic symmetry are of Bianchi types IX, VII0 and VIII, respectively. It is convenient to represent these spacetimes by a single formula: ds2 = t rdt2 + 2t rdt dr + t rdr 2   √ + t r d 2 + 1/ sin2  d 2 

(19.10)

where  = ±1 0. Then, with  = +1, the metric is spherically symmetric; with  = −1 we recover the hyperbolically symmetric metric via the identity sini = i sinh , and the limit  → 0 of (19.10) is plane symmetric. The three cases will be collectively called G3 /S2 -symmetric spacetimes, G3 standing for 3-dimensional groups and S2 for 2-dimensional orbits.

19.3 Dust in electromagnetic field, Rr = 0

369

In the comoving–synchronous coordinates that exist for each of the three metrics we will use a variant of the notation of (19.10):   ds2 = eCtr dt2 − eAtr dr 2 − R2 t r d 2 + f 2 d 2  (19.11) where f = sin  f =  f = sinh 

for spherical symmetry for plane symmetry

(19.12)

for hyperbolic symmetry

19.2 G3 /S2 -symmetric dust solutions with Rr = 0 Just as for the spherically symmetric models, the case Rr = 0 has to be considered separately; we will present it in Section 19.4. The most general set of solutions for the metric (19.11)–(19.12) with Rr = 0, a dust source and nonzero cosmological constant was found by Ellis (1967, his case IIaii). They are given by ds2 = dt2 −

  Rr 2 t r 2 dr − R2 t r d 2 + f 2 d 2   + 2Er

(19.13)

where Er is an arbitrary function, while Rt r and the matter-density are determined by (18.14) and (18.15). The required signature + − −− puts different limits on Er for each . With  = 0 Er must be non-negative everywhere, and can vanish only at isolated values of r, provided that Rr = 0 and Rr 2 /2E has a finite limit at the same values. With  = −1 Er must be strictly positive everywhere. In the Friedmann limit Rt r = grSt; then the r-coordinate can be chosen so that Rt r = rSt and it follows further that −2E/r 2 = k = constant, k being the Friedmann curvature index, Mr/r 3 = M0 = constant, M0 being the Friedmann mass integral. Thus, only  = +1 allows all three Friedmann limits. The requirement of the Lorentzian signature forces the Friedmann limit to have k < 0 when  = 0 or  = −1. The physical and geometrical interpretation of the plane- and hyperbolically symmetric solutions is less clear than that of the L–T model. In particular, it cannot be uniquely determined where exactly the mass Mr is contained. With plane symmetry, one can imagine it to be the mass contained within a column of height r along the r-direction, its base being a rectangle 1 ≤  ≤ 2  1 ≤ ≤ 2 . For brevity, we will be saying that Mr is contained within the surface r = constant. 19.3 G3 /S2 -symmetric dust in electromagnetic field, the case Rr = 0 19.3.1 Integrals of the field equations The most general solution of the Einstein–Maxwell equations with Rr = 0 was found by Bronnikov and Pavlov (1979). They considered charged dust under the assumption that

370

Relativistic cosmology IV

the metric tensor and the electromagnetic tensor both have a G3 /S2 group of isometries, with the cosmological constant allowed. We shall allow also for magnetic charges. With the assumed symmetries, in the coordinates of (19.11)–(19.12), the electromagnetic tensor can have at most two nonzero components, Ftr (the electric field) and F (the magnetic field). The F = 0 is due to a distribution of magnetic monopoles – admittedly a nonrealistic source, but it is useful to know what the theory implies for it. The Einstein–Maxwell equations are in this case (compare them with Eqs. (13.6), (13.10), (13.12), (13.15) and (13.16)):   1 8G 2G 1 R − g R + g = 4 u u + 4 F  F + g F F   (19.14) 2 c c 4 F   = 4/ce u 

(19.15)

∗F   = 4/cm u

(19.16)

Equation (19.14) is (13.16) rewritten for dust. Equation (19.15) is (13.6) with the current generating the field being composed of electric charges attached to the dust particles. Equation (19.16) is the generalisation of (13.15) for the current of magnetic charges attached to dust particles. The e and m are the densities of the electric and magnetic charge, respectively. √  √ Equation (19.15) is equivalent to −gF   = 4/c −ge u . Taking the various values for the index  we find F 01 = Qe re−A+C/2 /R2 

(19.17)

Qer = 4/ce eA/2 R2 

(19.18)

where Qe r is an arbitrary function; it is the electric charge within the r-surface as (19.18) shows. Doing the same with (19.16) we find ∗F 01 = Qm re−A+C/2 /R2 

(19.19)

Qmr = 4/cm eA/2 R2 

(19.20)

where now Qm r is the magnetic charge within the r-surface. Equation (19.19) translates into F23 = fQm r

(19.21)

Now the coordinate components of the Einstein equations with the metric (19.11) and the electromagnetic tensor (19.17)–(19.21) become 8G C G Qe 2 + Qm 2 C e + 4 e − eC  c4 c R4 G01 = 0

G00 =

G11 = −

G Qe 2 + Qm 2 A e + eA  c4 R4

(19.22) (19.23) (19.24)

19.3 Dust in electromagnetic field, Rr = 0

G22 ≡ G33 /f 2  =

G Qe 2 + Qm 2 + R2

c4 R2

371

(19.25)

For G we find G00

  Rr 2 eC Rt 2 At Rt Rrr Ar Rr C−A +e +  − 2 −2 = 2 + 2 + R R R R R R

G01 = −2 G11

Rtr At Rr Rt Cr + +  R R R

(19.27)

  Rt 2 eA Rr 2 Cr Rr Rtt Ct Rt A−C − 2 −2 =− 2 + 2 + +e +  R R R R R R

G22 =

(19.26)

(19.28)

 1 −C  e −4RRtt +2RCt Rt −2RAt Rt −R2 At 2 − 2R2 Att +R2 Ct At 4   1 + e−A 4RRrr +2RCr Rr −2RAr Rr +R2 Cr 2 + 2R2 Crr −R2 Cr Ar

4 (19.29)

Equations (19.14)–(19.16) imply the following:   (19.30) u  = 0   u  u = −1/c e F   + m ∗F   u

(19.31)   1   In order to derive these equations, apply R − 2 g R  = 0 to the right-hand side of (19.14) and note that (19.16) is equivalent to 4 √ −gm u 

(19.32) c Equation (19.30) follows when T   = 0 is contracted with u , Eq. (19.31) follows when (19.30) is used in T   = 0. The remaining terms cancel in consequence of (19.32) and the antisymmetry of F . Equations (19.30) (the conservation of mass) and (19.31) (the Lorentz force acting on charges in motion and pushing them off geodesic trajectories) are quite general and independent of any symmetry properties of spacetime. Applying (19.31) to our metric (19.11)–(19.12) we obtain F + F + F = −

Cr = e Qe + m Qm 

QQr 2eA/2 ≡  2 cR 2R4

(19.33)

where def

Q2 = Qe 2 + Qm 2

(19.34)

Applying (19.30) to our metric (19.11)–(19.12) we then obtain  2 A/2 G R e = 4 Nr  (19.35) 2 c where Nr is an arbitrary function of integration. We see that N so defined is, up to the choice of units, the sum of rest masses within the r-surface. The coefficient defining the

372

Relativistic cosmology IV

units was chosen so that the notation agrees with that in the pioneering paper (Bronnikov, 1983). From (19.18), (19.20) and (19.35) we now see that the ratios Qer /Nr = e /c and Qmr /Nr = m /c are both time-independent. Using now (19.33) and (19.27) we obtain from the equation G01 = 0 2Rt  e m

(19.36) Q Q + 2e−A/2 Rtr −e−A/2 At Rr = cR2  e  m (It is here that the case Rr = 0 has to be set aside for separate investigation. With Rr = 0, the equation G01 = 0 reduces to Rt Cr = 0 and cannot be used to determine Rr as we do below.) Since the expression in parentheses is independent of t, this can be integrated with the result  Q + m Qm  (19.37) e−A/2 Rr = r − e e cR where r is an arbitrary function of integration. Using (19.18), (19.20), (19.34) and (19.35) we now find QQr e Qe + m Qm = QQN

(19.38) ≡ c Nr With this, (19.37) becomes e−A/2 Rr = r −

QQN  R

(19.39)

and now the first part of (19.33) becomes Cr = 2

eA/2 QQN

R2

(19.40)

Using (19.39) and (19.40) to eliminate Rr and Cr from (19.28), we obtain from the G11 equation     Rtt Rt 2 Ct Rt  2 −  Q2 QN 2 − G/c4 −C 2 + 2 − − + +  = 0

(19.41) e R R R R2 R4 Multiplying by R2 Rt we easily find that the integral of this is   2Mr Q2 QN 2 − G/c4 1 −C 2 2 + − R2  e Rt =  −  + 2 R R 3

(19.42)

where Mr is an arbitrary function. Comparing this with (18.14) we see that  2 − /2 plays here the role of the L–T energy function Er. The function Mr is the effective mass that drives the evolution, but, as we will see, it is a combination of mass and charge that need not be positive. In order to see this, we will now compare (19.42) with the Newtonian limit, assuming  = 0. Let x denote the physical dimension (unit) of x. The dimensions of the quantities appearing in (19.42) are: R = length eC/2 dt ≡ ds = c × time M = G × mass/c2  N = √ mass × c2  and Q = charge ≡  mass × length3/2 /time. The function  2 −  is dimensionless, but, for consistency, must be assumed to have the form 2/c2 , where

19.3 Dust in electromagnetic field, Rr = 0

373

 = velocity2 . In order to find the Newtonian limit of (19.42), we multiply it by c2 and let c → . Denoting the Newtonian time by , we obtain R 2 = 2 + 2Gmr/R

But the Newtonian equation of motion of spherically symmetric charged dust is r 2 = 2r + 2Gr − e r/ rQr/r where r is the total mass within the sphere of radius r Qr is the total charge within the same sphere, e is the charge density and  is the mass density. Thus, the Mr in (19.42) corresponds to the Newtonian Gr − e r/ rQr, and, as announced, does not have to be positive. This relation will appear in other formulae later on. In order to verify the G22 equation, we have to find Ct from the G11 equation and At from the G01 = 0 equation. Substituting these, then finding Ar from (19.39), using the r-derivative of (19.42) to eliminate Rt Rtr and again using (19.39) to eliminate e−A , we obtain   G QQN − 4 Nr + M + QQN  r = 0

(19.43) c One solution of this is QN = 0, i.e. a constant total charge. We will deal with this simpler case later. When QN = 0, G Nr = M + QQN  r

c4

(19.44)

def

The quantity  = M + QQN  will appear again in Section 19.3.2, where, by matching our metric to the Reissner–Nordström solution, we will find that  is the active gravitational mass. Thus, via (19.44),  determines by how much  increases when a unit of rest mass is added to the source, i.e.  is a measure of the gravitational mass defect/excess. Solutions with  = 0 are known, this is the Datt–Ruban class of Subsection 19.4. Negative  can also occur; see the comments on the Novikov (1962a) paper in Section 18.20.2. This happens when the distribution of matter contains necks (see Section 18.10) or fills more than half the volume of a closed 3-space, like in the Friedmann k > 0 model matched to the Schwarzschild spacetime. However, the case  > 0 corresponds to the most ordinary configuration. Note thesimilarity  of the formula M =  −QQN  to the Newtonian relation Gmr = Gr − e / Q. The final equation to take into account is the G00 equation that defines the mass density of the dust. It reproduces (19.35). Using (19.39) to eliminate eA/2 from (19.35), we obtain  in a form analogous to (18.15):   2GN QQN  = 4 2 r  −

(19.45) c R Rr R Finally then, the Einstein–Maxwell equations for charged dust reduced to a set that defines the metric functions At r, Ct r and Rt r implicitly. The prescription for constructing a solution is this:

374

Relativistic cosmology IV

1. Choose the arbitrary functions Mr Qe r Qm r and r, and then solve (19.44) to find Nr. 2. Given these, express eA/2 through R via (19.39). 3. The set of equations (19.40) and (19.42) then defines eC and R. In the following, we will assume Qm = 0, i.e. no magnetic charges, in agreement with experimental knowledge. This does not influence the solutions in a significant way – it just changes the interpretation of some functions: with Qm = 0 we have Q = Qe . If, further, QN = 0, then Qe = constant, i.e. e = 0 from (19.18). Thus in this case the whole charge is contained in the set r = 0 – it is the electrically neutral dust moving in the exterior electric field of a charge concentrated at r = 0. Note, from (19.40), that when QN = 0, the dust moves on geodesics, whereas when QN = 0 it does not. Even so, note from (19.42) and (18.14) that a constant charge Q modifies the geometry, and the neutral dust in electric field moves on geodesics in a different geometry than does a neutral dust in pure gravitational field. This means that electromagnetic field exerts an influence even on electrically neutral matter via the Einstein equations. This is a purely relativistic effect. However, a constant charge at r = 0 does not modify the mass, and with QN = 0 Eq. (19.45) reduces back to (18.15). Following Bronnikov and Pavlov (1979) let us note from Eq. (19.42) that, with  = 0, the sign of  puts certain limits on the possible types of evolution of Rt r. When R increases, the third and fourth terms on the right of (19.42) decrease. Nothing can prevent R from growing to infinity when  ≤ 0. Thus these two cases cannot contain the recollapsing L–T or Friedmann models as subcases. When  = 0 Rt will decrease to zero at R → only if  = 0. However, with  = 0, Eq. (19.44) implies Mr = 0, i.e. the vacuum limit. Thus, the plane symmetric charged models do not contain the zero-energy L–T (or k = 0 Friedmann) models in a limit, although the evolution of the charged model can have qualitative features of the k = 0 model. Only in the spherically symmetric case,  = +1, are all three types of evolution possible, and all three L–T models are contained as subcases. Special cases of the Bronnikov–Pavlov class presented here were discovered and discussed by other authors in earlier papers – see Krasi´nski (1997) for a complete list. Of the more important subcases, the electrically neutral case for all three symmetries was solved by Ellis (1967), the spherically symmetric case with no magnetic charge was solved and discussed by Vickers (1973), the  = 0 subcase of the Vickers case was solved and discussed by Markov and Frolov (1970), the case with zero density of magnetic monopoles and zero cosmological constant for all three symmetries was investigated by Shikin (1974), and the further subcase with zero magnetic charge and zero electric charge density was discussed in an earlier paper by Shikin (1972). In this chapter, we will mention only the most important physical contributions. With vanishing charges, Qe = Qm = 0, in the spherically symmetric case  = +1, (19.31) reduces to the equation of a geodesic, while Eqs. (19.39), (19.40) and (19.42) reduce to those defining the L–T model, where 2E =  2 − 1.

19.3 Dust in electromagnetic field, Rr = 0

375

19.3.2 Matching the charged dust metric to the Reissner–Nordström metric From now on, we will limit ourselves to the case of spherical symmetry  = +1 and zero magnetic charge Qm = 0. Matching a matter solution to an electrovacuum1 metric can help in interpreting the arbitrary functions and constants. For spherical symmetry and zero magnetic charge, the appropriate electrovacuum metric is the Reissner–Nordström (R–N) solution2 presented in Section 14.4. We will allow for a nonzero cosmological constant. We first transform the R–N metric with , Eqs. (14.40)–(14.41), to the appropriate coordinates. For the t r coordinates of (14.40) we will write  RRN , and we introduce the symbol 2m e2 1 def h = 1− + + RRN 2 (19.46) 2 RRN RRN 3 in place of e2 . We demand that the new coordinates t r are still orthogonal, so that gtr = 0, i.e. 1 (19.47) ht r − RRNt RRNr = 0

h The function CRN t r is 1 eCRN = ht 2 − RRNt 2

h

(19.48)

We now solve (19.47)–(19.48) for r and calculate eC RRNr 2 1 g11 RN ≡ hr 2 − RRNr 2 = − C

h he + RRNt 2

(19.49)

The component g00 RN is not fully determined at this point; we will determine it later. Since  is defined by the partial differential equation (19.47), it still involves an arbitrary function of one variable. We wish to match the charged dust metric of Section 19.3 to the R–N solution given above across a hypersurface r = rb . This requires that the induced 3-metric and the second fundamental form of this hypersurface are the same for both spacetime metrics (by Section 12.17). The coordinates are adapted to the boundary, so we may use (7.96). Continuity of the 3-metric requires that eCtrb  = eCRN trb  

Rt rb  = RRN t rb 

(19.50)

The transformations that keep the metric diagonal are still allowed. Transforming t by  t = et dt, where  = CRN t rb  − Ct rb , we fulfil the first of (19.50), while g11 and  g01 are not changed. 1

2

An electrovacuum metric is a solution of the Einstein–Maxwell equations such that the mass density  and charge density e are both zero, but there may be an electromagnetic field in the spacetime generated by charges placed outside the region considered. A generalisation of the Reissner–Nordström solution for magnetic charge is known (Stephani et al., 2003), but it is geometrically insignificant. The only change is replacing e2 in the metric by e2 + q 2 , where q is the magnetic charge.

376

Relativistic cosmology IV

On the surface r = rb  RRN t rb  must be the same function of t as Rt rb . Consequently, Rt t rb  must be the same in both metrics, and so RRN t rb  must obey e−CRN trb  RRNt 2 t rb  =  2 rb  − 1 +

GQ2 rb  2Mrb  − 4 RRN t rb  c RRN 2 t rb 

1 − RRN 2 t rb 

3 The unit vector normal to the hypersurface r = rb has components       QQN  X  = 0 e−A/2  0 0 ≡ 0  − Rr  0 0 R for the interior metric, and, from (19.49),  h + e−CRN RRN t 2  XRN = 0  0 0 RRNr

(19.51)

(19.52)

(19.53)

for the R–N solution. From the continuity form we have   of the second    fundamental r  C r CRN r  Rr X r r=rb = RRNr XRN and e X = e X . The first condition   r r RN r=rb r=rb r=rb says that     QQN 2 −CRN 2 RRNt r=r =  −  (19.54) h+e b R r=rb which ensures the continuity of g11 = −eA across r = rb , even though we have not required this. Substituting for RRNt 2 from (19.51) and for h from (19.46), and then comparing the coefficients, we obtain √ G e = 2 Qrb  m = M + QQN r=rb

(19.55) c The continuity of the second fundamental form imposes one last condition, on Cr . Using (19.40), (19.39) and (19.49), the condition is   − QQN /R  QQ CRNr = 2 2N

(19.56)  RRNr R r=r b

We have no expression yet for CRNr , and we will find it from the field equations now. We know that eA is continuous at r = rb , so we can use (19.39) for ARN t rb . Substitute this in (19.27), and take the equation G01 = 0 at r = rb . The result is  2RRNr QQN   CRNr t rb  = 2  (19.57) R  − QQN /R r=rb and it shows that (19.56) is fulfilled. Thus, (19.55) are the only limitations imposed on the charged dust metric by the matching conditions. This matching was first discussed by Vickers (1973). The second of (19.55) once more reveals the connection between the active gravitational mass m and the effective mass M.

19.3 Dust in electromagnetic field, Rr = 0

377

19.3.3 Prevention of the Big Crunch singularity by electric charge It turns out that the presence of electric charges has a strong influence on the evolution of the dust. In discussing this, we shall follow Vickers (1973), with a few corrections. In the present section we will deal only with the Big Bang/Big Crunch (BB/BC) singularities. The shell crossings will be discussed separately in Section 19.3.6. Also, we assume  = 0, since with nonzero  the situation becomes more complicated. When Qr = 0, the avoidance of  Bang singularity is not guaranteed. In the  the Big following we shall denote Er =  2 − 1 /2. The presence or absence of a singularity is detected by investigating the roots of the right-hand side of (19.42), which, for this purpose, is more conveniently written as   def (19.58) e−C R2 Rt 2 = 2ErR2 + 2MrR + Q2 QN 2 − G/c4 = WR

At each root of WR, the sign of Rt changes, and evolution is possible only in those regions where WR ≥ 0. The following cases occur: (a) When E < 0, WR has roots only if   M 2 ≥ 2EQ2 QN 2 − G/c4

(19.59)

With no roots, WR would be negative at all R, so (19.59) is the condition for the existence of a solution of (19.58). The roots are    1 M ± M 2 − 2EQ2 QN 2 − G/c4  (19.60) R± = − 2E 2E and WR > 0 between them. Nonsingular solutions will exist when both R± > 0 (with R± < 0, no solution exists at all, with R− R+ < 0, R = 0 is in the allowed range.) This is equivalent to QN 2 < G/c4

and

M > 0

(19.61)

We will interpret these conditions later on in this section. If there is equality in (19.59), then WR < 0 for all R = R− = R+ , and WR±  = 0. Then R = R± and the model is static. If, in addition, QN rb  = 0 (meaning that e rb  = 0) and rb  = 0, then E = −1/2, and in this case the exterior R–N metric is the extreme one, with e2 = m2 , as seen from (19.59) and (19.55). With (19.61) fulfilled, R oscillates between a minimum and a maximum, never going down to zero. (b) When E = 0, singularity is avoided if and only if M > 0 and QN 2 < G/c4 . Collapse is then halted and reversed once and for all. (c) When E > 0, WR > 0 either everywhere (if are noroots) or beyond the roots.  there 2 2 2 There will be no roots when M < 2EQ QN − G/c4 , in which case WR > 0 for all R including R = 0, and the model can run into the singularity. Thus (19.59) is here one of the necessary conditions for the existence of nonsingular solutions. With (19.59) fulfilled, WR has two roots, and at least one of them has to be

378

Relativistic cosmology IV

positive if singularity is to be avoided. With M > 0, we have R− < 0 always and R+ > 0 if and only if QN 2 < G/c4 . With M < 0, R+ > 0 and R− < R+ always, so non-singular solutions exist with no further conditions, provided that R > R+ initially. Collapse is then halted and reversed as in case (b). 2 4 Now we will interpret the conditions √ (19.61). The inequality QN < G/c , with Qm = 0 and Qe = Q, translates into e < G/c. Thus, with M < 0, the BB/BC singularity is avoided only if E > 0 and (19.59) is fulfilled, with no further conditions on e . This is a non-relativistic bounce, since it occurs also in Newton’s theory, under √ the same conditions.1 With M > 0, a nonsingular bounce will occur only if e < G/c, i.e. if the absolute value of the charge density is sufficiently small (but nonzero) compared with the mass density. This is a purely relativistic effect that does not occur in the Newtonian limit: with M > 0, R = 0 is always in the allowed range of Newtonian solutions. The physical interpretation of the relativistic bounce is this: as seen from (19.42), the charges a correction to the effective mass M, so that it becomes  provide  2 2 4 M = M + 1/2Q QN − G/c /R. This correction is negative at small charge density (when QN 2 < G/c4 ), so it weakens gravitation, thus helping the dust to bounce. However, at large charge density (QN 2 > G/c4 ), charges enhance the effective mass and thus oppose bounce. Nevertheless, in the latter case, the Newtonian electrostatic repulsion can prevail, provided that M < 0 at the same time. Recall a similar phenomenon that we encountered while discussing the motion of particles in the Reissner–Nordström spacetime (Section 14.16), where an electric charge in the source of the gravitational field creates effective antigravitation, provided the charge is small enough compared with the mass. With QN = 0 the singularity is avoided in every case when a solution exists. Thus, for neutral dust moving in an exterior electric field, the BC/BB singularity never occurs. This was first found by Shikin (1972). This is a purely relativistic effect. We have proven that in some cases a solution of (19.42), for which R = 0 initially, does not go down to 0. However, if the charged dust occupies a volume around the centre of symmetry R = 0, then, at any time, there are dust particles with all values of R, including R = 0. We will find in the next section the conditions to be obeyed in order that the centre is nonsingular. For the particles at R = 0, the initial conditions can be set up so that the dust is collapsing at t = ti . Thus, the inner turning points given by (19.60) will exist arbitrarily close to the centre. This has consequences for the shell crossings discussed in Section 19.3.6. If EM < 0 and QN 2 = G/c4 , then (19.58) has a time-independent solution R = −M/E. In this case, the electrostatic repulsion just balances the gravitational attraction and the whole configuration is static – but unstable. Any small (necessarily negative) perturbation of this value of R will send the dust into collapse that will terminate at R = 0. At the surface of the charged sphere Eq. (19.58) will coincide with (14.176) (up√ to a √ transformation of time) if J0 = 0 (radial motion) and e = GQ/c2 , q/ = c2 QN / G,

1

It should not be surprising that there are no further conditions on e when M < 0 and E > 0, since these two inequalities already imply that the absolute value of the charge density must be large.

19.3 Dust in electromagnetic field, Rr = 0

379

m = M − qe/. Consequently, the surface of a charged dust sphere obeys the equation of radial motion of a charged particle in the Reissner–Nordström (R–N) spacetime. As shown in Section 14.16, for such a particle, if q/2 < 1, then the reversal of fall to escape can √ occur only inside the inner R–N horizon, at R < r− = m − m2 − e2 . Thus, the surface of a collapsing charged dust sphere must continue to collapse until it crosses the inner horizon at R = r− , and can bounce at R < r− . Then, as seen from Fig. 14.10, it cannot reexpand back into the spacetime region I from which it collapsed, since this would require motion backwards in time. The surface would thus continue through the tunnel between the singularities and re-expand into another copy of the asymptotically flat region. The bounce at small charge density (QN 2 < G/c4 ) would be more interesting physically, since the real Universe has no detectable net charge, so only small charges could exist in it. We saw that an arbitrarily small uncompensated charge can prevent the BB/BC singularity. Unfortunately, Ori (1990, 1991) proved that precisely in this case a shell crossing is unavoidable, and it will block the passage through the tunnel. We will derive this result in Section 19.3.6. Thus, a nonsingular bounce through the R–N tunnel is impossible when QN 2 < G/c4 everywhere.

19.3.4 * Charged dust in curvature and mass-curvature coordinates It is instructive to transform the metric given by (19.11) with f = sin , (19.39), (19.40) and (19.42) to coordinates in which the function Rt r is the radial coordinate. We note that Rr dr = dR − Rt dt, and then we take t to be a function of the new coordinates: t = f R. Thus Rr dr = dR − Rt f d + fR dR  dt = f d + fR dR

(19.62)

and the new metric components, using (19.42), are found to be g = gR = gRR = def

eC f 2   − QQN /R2



eC f fR  + f Rt  − QQN /R2

(19.63) 

eC fR 2  − 1 + 2fR Rt  − QQN /R2

 = 1−

(19.64) 

2 GQ2 1 + 4 2 + R2  R cR 3

(19.65) (19.66)

where we have defined def

 = M + QQN 

(19.67)

Note, from (19.62), that the transformation for collapsing dust Rt < 0 is different from that for expanding dust Rt > 0. The transformation from  R to t r, inverse

380

Relativistic cosmology IV

to (19.62), is analogous to introducing, in the Reissner–Nordström region r > r+ = √ 2 m + m − e2 , coordinates comoving with the congruence of charged particles that are radially collapsing or expanding, respectively. Figure 14.10 shows that in this way we obtain a coordinate map that covers regions I and II for the collapsing congruence or regions I and IV for the expanding congruence. The extension is to the future or to the past, respectively. This can now be specialised in two ways. One possibility is to choose the proper curvature coordinates, in which gR = 0. This representation of the Vickers metric has not found any application in the literature so far, but it is instructive. From gR = 0 we find fR = −e−C Rt /

(19.68)

and substituting it in (19.65) we obtain gRR = −1/

(19.69)

The resemblance to the Reissner–Nordström metric is now evident, and the quantity  that plays the role of mass is indeed the one identified by Vickers (1973); see Eq. (19.55). The component g is given by (19.63), with f to be found from the Einstein equations. The other possible specialisation of (19.63)–(19.65) is to choose the  defined in (19.67) as the new -coordinate. These mass-curvature coordinates were first introduced by Ori (1990). The surfaces  = constant are timelike, so none of the coordinates is time and the metric cannot be diagonal. Since , Q,  and N depend only on r in the original coordinates, we have Q = Q,  =  and N = N. The Jacobi matrices of the transformations t r ↔  R are   t r f fR  (19.70) =  R r rR    R 0 r

(19.71) = t r Rt Rr These matrices is must be inverse to each other. Hence: Rr f = −  fR = 1/Rt  r = 1/r  Rt r

rR = 0

(19.72)

def

In the coordinates x0  x1  =  R the velocity field still has only one contravariant component:    2M Q2 QN 2 − G/c4 1 1 2 + − R2

(19.73) u = ±  −1+ 2 R R 3 We define the auxiliary quantities def

u =  − QQN /R def

 = eC/2 /u

def

f = F R

(19.74) (19.75)

19.3 Dust in electromagnetic field, Rr = 0

381

and, using (19.66), (19.73) and (19.42), we obtain in (19.63)–(19.65): def

g = F 2  = 

(19.76) 1 def

gR = Fu2 /Rt = Fu/u = 

(19.77)

def

gRR = 1/u 2 = 

1

(19.78)

The function F is to be found from the field equations. Equations (19.76)–(19.78) differ from those of Ori (1990) only by notation. For some further calculations it is useful to note that  − 2 = −F 2

(19.79)

Using (19.72), (19.17) and (19.75) we find that the only nonvanishing components of the electromagnetic tensor in the  R coordinates are F R = −F R =

Q  FR2

FR = −FR = −

FQ

R2

(19.80)

Further, using (19.17), (19.18), (19.35), (19.39), (19.44), (19.42) and (19.73) we find for the charge density and energy-density 4e uQ Q uQ = 2 r ≡ − 2  ≡ − 2  1  c R Rr R f Rt R Fu  =

2u 2 2ur ≡− 2 ≡ − 2 1

R2 Rr R FRt R F u

(19.81) (19.82)

Equations (19.76)–(19.78) and (19.80)–(19.82) show that F R is the only unknown function. Denoting √ def 1 uR = u ≡ ± u2 −  (19.83) (the + sign for expansion, − for collapse), we obtain u = uF g  = −

uR = 1/uR  1

FuR 2



g R =

(19.84) u  FuR

g RR = −

(19.85)

Dividing (19.44) by r and using the definition of , Eq. (19.67), we find that in the  R coordinates Eq. (19.44) reads G N = 1

c4

(19.86)

The function F can be found from the equations of motion (19.31). With m = Qm = 0, using (19.38), they read u  u = −

e  F u ≡ −QN F  u  c

(19.87)

382

Relativistic cosmology IV

and imply just one equation: FR = −

uR  u uR 2



Using (19.74), (19.83) and (19.86), we transform (19.88) to    1 1 c4 2  + 1 − QN + QQNN 

FR = − R G uR  R3

(19.88)

(19.89)

This coincides, except for notation, with Ori’s (1990) result. Note that we have not assumed  = 0. As Ori (1990) stressed, Eqs. (19.76)–(19.78), (19.84) and (19.89) determine the metric explicitly, in contrast to the representation by Vickers used in Section 19.3, where the Einstein–Maxwell equations were reduced to a set of two differential equations.

2 With  = 0, the integral of (19.89) is of the form cxax+bx 2 +dx+e3/2 dx and is elementary, though complicated; it requires separate treatment of various subcases. The full list of results is given in Ori’s paper. It can now be verified that the Einstein–Maxwell equations are all fulfilled. The identity QN ≡ Q /N = GQ /c4 , resulting from (19.86), is helpful in the calculations. Note, from (19.76)–(19.78) and (19.82), that the metric and the mass density are insensitive to the sign of uR . As explained in the remark after (19.66), uR > 0 and uR < 0 correspond to different maps with different domains. Thus, integrating (19.89) from R1 to R > R1 with uR > 0, we integrate forward in time, whereas calculating the same integral with uR < 0, we integrate backwards in time.

19.3.5 Regularity conditions at the centre Just as in the L–T model, the set R = 0 in charged dust consists of the BB/BC singularity (which we showed to be avoidable) and the centre of symmetry, which may or may not be singular. We will now derive the conditions for the absence of the central singularity. We assume no magnetic charges. Let r = rc correspond

√to the centre of symmetry. From (19.11), (19.12) and (19.35) we see that Nr = 4   −g d3 x, where  is a sphere centred at r = rc in a t = constant space. Thus, if  has no singularity of the type of the Dirac delta at the centre, Nr must obey Nrc  = 0. Similarly, Eqs. (19.11)–(19.12) and (19.18) show that if there is no deltatype singularity of e at the centre then the electric charge must obey Qrc  = 0. With both  and e being nonsingular at rc , the ratio e rc /rc  is nonsingular, and (19.18) with (19.35) show that limr→rc Q/N = limr→rc QN = e rc /crc  is finite (possibly zero). Then, (19.86) implies that rc  = 0 and limr→rc N/ = constant = 0. Thus, we can use  instead of N as the variable in calculating the behaviour of functions in the vicinity of r = rc (of  = 0). Since Rt rc  = 0 and Nrc  = 0, we find from (19.45):   R3 3R2 Rr 3 QQN = lim = lim −

(19.90) lim r→rc N r→rc r→rc 4 Nr R

19.3 Dust in electromagnetic field, Rr = 0

383 def

This limit will be finite if limr→rc QQN /R < . We already know that QN rc  = q0 = constant and Q =  q0 N + O1 N, using the notation of Section 18.4. Thus, Q = q0  + O1  and limr→rc QQN /R < if R = constant ×   + O , where  < 1. Then, (19.90) imposes the further condition that, in the neighbourhood of rc , R = t 1/3 + O1/3 

(19.91)

Since Rt rc  = 0 at all times, we have Rt t rc  = 0. All other terms in (19.42) except  2 −  vanish at r = rc , so, in the spherically symmetric case  = +1, we must have lim  2 r = 1 =⇒ lim Er = 0

r→rc

r→rc

(19.92)

Note that this does not exclude  < 0.

19.3.6 * Shell crossings in charged dust As can be seen from (19.75) and (19.72), F = 0 is equivalent to Rr = 0, so F = 0 is a locus of shell crossings. Then, from (19.82) we see that FuR must be negative for the density of dust to be positive. Since uR = dR/ds < 0 during collapse, F must then be positive. Now let us write the solution of (19.89) as follows:     R  1 1 c4  2  + 1− F=− dx + g QN + QQNN 3 x G R1 uR  x (19.93) where g is an arbitrary function and R1 is the initial value of R. When approaching the bounce in the central region, we have R1 > R, so the integral term is positive when the expression in square brackets is negative. We saw in Section 19.3.3 that there are dust particles with all values of R, including R arbitrarily turning  2 small values. −3/2 At the  point in collapse u → 0. The integrand is of the 3 2 form ax + bx + c a2 x + a3 x , and the trinomial has real zeros, so the integral is unbounded (which shows that uR = 0 is a coordinate singularity). From (19.93) it is seen that as we approach near to R = 0  = 0, the coefficient 1/x will dominate. We know from the regularity conditions that lim →0  2 = 1, lim→0 Q = 0 and lim→0 QN = constant < . Thus, as long as QN 2 < G/c4 , the term containing 1/x will dominate in the vicinity of R = 0 and will determine the sign of the infinity in F . Now it turns out that the sign of F will necessarily change to the opposite during collapse. If  > 0, then F > 0 can be achieved at R = R1 , as is necessary, by a choice of  and g, but F → − as R → 0. If  < 0, then F < 0 can be achieved at R = R1 , but F → + as R → 0. This means that there is necessarily a shell crossing somewhere at R > 0 if QN 2 < G/c4 holds all the way down to  = 0. This is the theorem proven by Ori (1990, 1991).1 1

We thank Amos Ori for an extended correspondence on this point. The discussion helped to clarify several other points in this section.

384

Relativistic cosmology IV

The infinity in F can be avoided altogether if the term in square brackets in (19.93) is zero at the same x at which uR = 0. The zero of uR is given by (19.60); it is R = R+ . In that case F is finite at R = R+ and, by (19.82),  becomes infinite, i.e. R = R+ becomes a true curvature singularity. Thus, also in this case the charged dust cannot tunnel through the Reissner–Nordström throat. The only situations in which both the BB/BC and shell crossing singularities can be avoided are the following: 1. When lim→0 QN 2 = G/c4 . Then, because of lim→0 Q/R = 0, the term  in (19.93) has a chance to outbalance the other one and secure the right sign of F everywhere. 2. When QN 2 > G/c4 , E > 0 and M < 0. Then, as shown in Section 19.3.3, a nonsingular bounce is possible, and shell crossings will not occur, either. However, at the time of writing this book, no examples of such solutions are known.

19.4 The Datt–Ruban solution Now we will deal with the special case Rr = 0 in (19.11)–(19.12). The Einstein–Maxwell equations and the equations of motion, (19.22)–(19.32), are still valid. Equations (19.23) and (19.27) imply Rt Cr = 0. With Rt = 0, taking the combination e−C G00 + e−A G11 , we obtain  = 0, i.e. an (electro)vacuum solution, which we will not consider. Thus Cr = 0, which means that the dust is moving on geodesics. A transformation of time can def

then be used to achieve C = 0. Using the notation Q2 = Qe 2 + Qm 2 , we find from (19.24) and (19.28)  Rt 2 Rtt GQ2 + + 2 − 4 4 +  = 0

R2 R2 R cR

(19.94)

Since Rr = 0 Q must be constant. According to (19.18) and (19.20), this means that the densities of electric and magnetic charge must be zero. Thus, the only kind of electromagnetic field that is compatible with the geometry we are now considering is the free field; the dust is uncharged and moves in the exterior electric field. Multiplying (19.94) by R2 Rt and integrating we obtain Rt 2 = − +

2M GQ2 1 − 4 2 − R2  R cR 3

(19.95)

where M is a constant. Then, Eqs. (19.25) and (19.29) imply 1 1 1 GQ2 RRtt + RAt Rt + R2 At 2 + R2 Att + 4 2 + R2 = 0

2 4 2 cR

(19.96)

19.4 The Datt–Ruban solution

385

This is much simplified by the substitution A = 2 ln ut r and then u = Rt wt r. For the function w the following equation results: (19.97) 2RRtt wt +RRt wtt +Rt 2 wt = 0



  Its general solution is w = Xr 1/ RRt 2 dt + Yr, where Xr and Yr are arbitrary functions. Thus    1 A/2 dt + Yr

(19.98) e = Rt Xr RRt 2 The expression for the metric is  √   ds2 = dt2 − eA/2 dr 2 − R2 t d 2 + 1/ sin2  d 2 

(19.99)

and the expression for matter density is found from (19.22) and (19.26) with use of (19.95) and (19.98): 2X (19.100)  = 2 A/2

Re This solution of the Einstein–Maxwell equations was first semi-published by Ruban (1972), and then mentioned in a later paper (Ruban, 1983). The Ruban spacetime is globally a T-region:1 the gradient of R is timelike everywhere. Consequently, as mentioned in Section 14.1, the curvature coordinates do not exist in this case. Since R depends only on t, the spaces t = constant do not contain their centres of symmetry: R is not zero at any point of such a space (except when R = 0 at the given value of t, but this is a singularity analogous to the Big Bang). In fact, Eq. (19.95) shows that with  = 0 and Q = 0 no Big-Bang-like singularity can occur: the term with the electric charge is negative and tends to − when R → 0, while the right-hand side of this equation must be positive. (Note that with  = 0 and  = +1 Eq. (19.95) has no solutions at all if M 2 < GQ2 /c4 , and has only the static solution R = M when M 2 = GQ2 /c4 . However, we have shown at the beginning of this section that the solution with Rt = 0 is electrovacuum.) The radius R is constant in the 3-space t = constant. The geometry of this 3-space with  = +1 is that of a 3-dimensional cylinder whose sections r = constant are spheres, all of the same radius, and the coordinate r measures the position along the generator. The space is inhomogeneous along the r-direction, and the electric field has its only component also in the r-direction. The radius of the cylinder evolves with time according to Eq. (19.95). The subcase Q = 0  = +1 of this solution, i.e. the case of zero electric field and spherical symmetry, was found by Ruban in an earlier paper (Ruban, 1968) and discussed in an illuminating way in yet another paper (Ruban, 1969); we will report on that discussion below. The further subcase  = 0 appeared in a paper by Datt published as early as 1938 (Datt, 1938), but the author arbitrarily dismissed it as being of ‘little physical significance’. This subcase is the first in which explicit formulae for R and eA/2 1

For the definition of the T- and R-regions, see Section 14.1.

386

Relativistic cosmology IV

may be given. The solution for Rt is in fact the same as for the k = +1 Friedmann model, while eA/2 = 2Xr1 − Z cot Z + Yr cot Z

def Z = arcsin R/2M

(19.101)

From (19.98) and (19.100) it can be seen that the solution becomes spatially homogeneous

r = 0 when X/Y = C = constant. Then, by the coordinate transformation r  = Yrdr the metric component eA/2 is made independent of r, which shows that in this case an additional Killing field exists. This subcase has the Kantowski–Sachs geometry introduced in Section 10.7. When, further, C = 0, the solution becomes vacuum. In the case  = 0 this vacuum solution corresponds to that part of the Schwarzschild manifold that is not covered by the curvature coordinates, i.e. inside the event horizon, as mentioned in Section 14.4. Various generalisations to these subcases were found by several authors; see Krasi´nski (1997) for a complete list. Among these generalisations are, for example, solutions with the Kantowski–Sachs geometry and with various sources that are more general than just perfect fluid. Here we will mention only one generalisation: Korkina and Martinenko (1975) worked out the case when the source in the Einstein equations for the metric (19.99) (with  = +1) is a general perfect fluid, with nonzero, time-dependent, pressure. With no specific equation of state, the Einstein equations cannot be solved to the end, and are then just reduced to a single ordinary differential equation that contains an arbitrary function of time (the pressure). Now we come to the geometrical/physical interpretation of the general Ruban solution in the spherically symmetric case,  = +1. Note that the matter-density in this solution, given by (19.100), depends on r and is everywhere positive if X > 0. Thus, the amount of rest mass contained inside a sphere r = r0 = constant does depend on the value of r0 , and is an increasing function of r. Nevertheless, as seen from (19.95), the active gravitational mass M that drives the evolution is constant. It looks as if all matter added to the source loses all its ability to gravitate, and the active gravitational mass is just a parameter of the space on which infalling matter has no influence. Ruban (1969) interpreted this property as follows: the gravitational mass defect of any matter added exactly cancels its contribution to the active mass. Equation (19.95) with Q = 0 is the same that governs the evolution of the Friedmann models, Eq. (17.28). Note that the constant  = ±1 0 in (19.95) that determines the type of symmetry automatically fixes the type of evolution. Thus with  = +1 (spherical symmetry), the model is necessarily the recollapsing one k = +1. Now compare (19.95) with the law of evolution of the L–T model, (18.14) – the Datt–Ruban (D–R) model has E = −1/2 and Rr = 0 permanently. Thus, it behaves like a neck in the L–T model (see Section 18.10). Finally, compare (19.95) with Q = 0 with the Schwarzschild solution in the Lemaître– Novikov coordinates, (14.116)–(14.117). It is clear that the two solutions can be matched across r = rb if Erb  = −1/2 and m = M; see Exercise 7.

19.5 The Szekeres–Szafron family of solutions

387

In the special case Q =  = 0, the D–R model explodes out of a singularity at R = 0 at t = tB , expands until R = 2M is reached at t = tB + M, and then collapses back to R = 0 at t = tB + 2M (Exercise 8). Thus, the hypersurface across which the D–R model is matched to the Schwarzschild solution is hidden inside the Schwarzschild event horizon, except at the instant of maximal expansion, when the D–R sphere touches the Schwarzschild horizon from inside (Ruban, 1983). The D–R model and its generalisations have no analogues in the Newtonian theory and do not show up in linear approximations to Einstein’s theory.

19.5 The Szekeres–Szafron family of solutions Consider the metric

  ds2 = dt2 − e2 dz2 − e2 dx2 + dy2 

(19.102)

where  and  are functions of t x y z to be determined from the Einstein equations. The source is taken to be a perfect fluid, and the coordinates of (19.102) are assumed to be comoving so that u =  0 . This implies that u˙  = 0 and that pressure depends only on time. Several different parametrisations are in use for the solutions of the Einstein equations with the metric (19.102), and some notations are conflicting. We shall follow Szafron’s (1977) exposition. The orthonormal tetrad components of the Einstein tensor for the metric (19.102) are   G00 = e−2 −x 2 − y 2 − xx −xx −yy −yy   (19.103) + e−2 −3z 2 − 2zz + 2z z + 2t t + t 2  G01 = e− −2tz + 2t z − 2t z  

(19.104)

G02 = e− −tx − tx − t x + t x     G03 = e− −ty − ty − t y + t y    G11 = e−2 z 2 + e−2 xx + yy − 3t 2 − 2tt 

(19.105) (19.106) (19.107)

G12 = e−− −zx + z x   (19.108)   (19.109) G13 = e−− −zy + z y   2   2  −2 −2 y + x x + yy − y y + e z + zz − z z G22 = e (19.110) − t t − t 2 − t 2 − tt − tt    G23 = e−2 −xy − x y + x y + x y  (19.111)     G33 = e−2 x 2 + xx −x x + y y + e−2 z 2 + zz − z z − t t − t 2 − t 2 − tt − tt

(19.112)

388

Relativistic cosmology IV

With a perfect fluid source, the Einstein equations are G00 =  and G11 = G22 = G33 = −p (the cosmological constant can be taken into account as the special case p = −,  →   + ). The equations G01 = G12 = G13 = 0 say, respectively,   − e− z  x = e− z  y = 0

(19.113) e z t = 0 The last two equations imply that z = ut ze

(19.114)

The cases u = 0 and u = 0 have to be considered separately because the integration proceeds in a different way in each case, and the limit z → 0 of the solution for z = 0 is singular (see Section 19.6.3). The relation between these two cases is closely analogous to the relation between the Datt–Ruban model and the L–T model. We will see later that the L–T and Datt–Ruban models are the spherically symmetric limits of the z = 0 subfamily and of the z = 0 subfamily, respectively.

19.5.1 The z = 0 subfamily The equations G01 = G12 = G13 = 0 are fulfilled identically. In solving the other equations, we can assume that tx = 0 = ty because otherwise the equations have no solutions; the proof is given in Section 19.10. Then  = ln t + x y

(19.115)

where  and  are unknown functions, while G02 = G03 = 0 imply that e− x =  1 z x y

e− y =  2 z x y

(19.116)

where  1 and  2 are other unknown functions. Using (19.115) for  and denoting def

i z x y =  i e , i = 1 2, we obtain e x = 1 z x yt e y = 2 z x yt

(19.117)   The integrability condition e x  y = e y x implies 1y = 2x . This means that a function z x y exists such that 1 = x , 2 = y . Knowing this, (19.117) can be integrated to give e = tz x y + t z

(19.118)

where t z is an unknown function. Substituting for  and  from (19.115) and (19.118) in (19.107) we obtain in the equation G11 = p   def e−2 xx + yy = 2tt + t 2 + p2 = − k = constant because  depends only on x and y while  and p depend only on t.

(19.119)

19.5 The Szekeres–Szafron family of solutions

389

Now it is convenient to introduce the complex variables def

= x + iy

= x − iy

(19.120)

in which the first part of (19.119) becomes −4e−2  = k

Differentiating this by solution is

(19.121) 

we obtain an equation equivalent to  −  − 

 2

 = 0, whose

=  

(19.122)

  being an arbitrary function. Now, −4e−2  2-dimensional metric

is the curvature scalar of the

ds2 2 = e2 d d 

(19.123)

2

and Eq. (19.121) says that the curvature is constant. Thus, depending on the sign of k, the metric (19.123) is equivalent to one of the 2-metrics in (19.11)–(19.12). We will now transform it to a simpler form. A transformation of the form = f  → = f    is a conformal symmetry of (19.123); the new metric has a different :       =    +

 1   1  ln f  + ln f  

2 2

(19.124)

After such a transformation, the new function  in (19.122) becomes     = f  f



2

+

 1 ln f   2

−

 

 2 1 ln f   

4

(19.125)

We can choose f so that   = 0, after which the new  will obey  − This implies e−   = 0 = e−  

2

= 0

(19.126)

since  is real. Hence

e− = a

+ B + B + c

(19.127)

where a, B, B and c are arbitrary constants (a and c being real) that, in consequence of (19.121), must obey ac − BB = k/4

(19.128)

Let us note a few properties of the metric (19.123) with (19.127). Lemma 19.1 If k = 0, then (19.123) may be transformed to dx2 + dy2

ds2 2 = 

2

1 + 41 k x2 + y2 

(19.129)

390

Relativistic cosmology IV

Proof: Suppose that k > 0. Then ac > 0 from (19.128). Carry out the following chain of transformations: (1) =  − B/a; (2)  = 1/a  ; (3)  = x + iy. The resulting metric is (19.129). If k < 0 and a = 0, then the same chain of transformations will do the job. If a = 0 and c = 0, then the transformation = 1/  restores a = 0, with B and B interchanged. If a = c = 0, then a = 0 is restored by the Haantjes transformation (8.79) which, in the variables   , is 

=

−C

 

1 − C  − C  + CC



 

(19.130)

where C = C1 + iC2 . The transformed metric is d d

ds2 2 = 

B  + B  − BC + BC

 

2 

(19.131)

and (19.129) is achieved in the already-known way. Since c = 0 in (19.131), Eq. (19.128) is fulfilled with the same B and B. Lemma 19.2 Equation (19.129) applies also when k = 0. Proof: If a = 0, then c = BB/a from (19.128), and the job is done by the chain of transformations (1) =  − B/a; (2)  = 1/a  . If a = 0, then, with k = 0, Eq. (19.128) implies B = B = 0, and then the metric is reduced to (19.129) by = c  . For the proof that (19.129) is equivalent to the 2-dimensional metrics of constant curvature contained in (19.11)–(19.12) see Exercise 9. Conclusion: The coordinates x y may be chosen so that B = 0, c = 1, a = k/4: e =

t t = 1 + 41 k x2 + y2  1 + 41 k

def

= e

(19.132)

We will continue to use the complex coordinates (19.120). As shown in Section 19.10, the equations G22 − G33 − G23 = 0 and G22 − G33 + G23 = 0 then become (19.334) and its complex conjugate. After substituting from (19.118) and (19.132) they change to e−  = e−  = 0

(19.133)

19.5 The Szekeres–Szafron family of solutions

391

Thus, similarly to e− itself, e−  is of first degree in and of first degree in . Since  depends on z, the integration constants will be arbitrary functions of z. In the x y coordinates, the solution of (19.133) is1     1  = e Uz x2 + y2 + V1 zx + V2 zy + 2Wz

(19.134) 2 With this, the only equations that are not yet satisfied are G22 = p and G00 = . Substituting (19.134), (19.118), (19.132) and (19.113) in (19.110) and taking G22 = p we obtain tt  + t t +tt +p = Uz + kWz

(19.135)

Substituting all the results in (19.103) we obtain for the matter density  = 2 tt / − tt  e− + 3t 2 /2 + 3k/2

(19.136)

With this, all the Einstein equations are solved. Collecting all the information together, the metric thus found is   ds2 = dt2 − e2 dz2 − e2 dx2 + dy2  e = tz x y + t z e = te     2   1 2  =e Uz x + y + V1 zx + V2 zy + 2Wz  2

(19.137)

 1  e− = 1 + k x2 + y2  4 where k is an arbitrary constant, t is determined by the equation 2tt +t 2 + p2 + k = 0

(19.138)

while t z and the matter-density are given by (19.135) and (19.136). This is as far as one can get without assuming any equation of state, which is necessary to determine p and then solve (19.138). However, since the pressure depends only on t, the barotropic equation of state  = p makes the matter density spatially homogeneous, and the resulting model ceases to be interesting for advanced cosmology. The model (19.137)–(19.138) is a generalisation of the Datt–Ruban class, which results from here as the limit V1 = V2 = 0, U = kW . All the Robertson–Walker models are also contained here as the limit  = 0, U = −kW , in the form (17.83)–(17.84). They result in a simpler form if U = W = V2 = 0, V1 = 1 in addition (which just means a more specific choice of coordinates in the R–W limit):  2 2  2 2 2 x dz + dx + dy 

2 t

ds2 = dt2 − 

1 + 41 k x2 + y2 

1

(19.139)

The coefficients at U and W were added in order to make the subsequent formulae consistent with those of Szafron (1977). There is an inconsistency between Szafron’s Eqs. (2.23) and (2.24).

392

Relativistic cosmology IV

and then the following transformation will reduce (19.139) to (17.1):  = R

x = r sin 

y = r cos 

z =

(19.140)

Equation (19.138) is identical to (17.25) that governs the evolution of the R–W models (the cosmological constant can be taken into account here by redefining p and ). Note that W = 0 can be assumed without loss of generality because W = 0 results by the reparametrisation U =  u + kW ,  =   − 2W ;  u then replaces U and   replaces  in the equations. Note also that if k = 0, then the reparametrisation  =   − U/k + W,  + U/k leads to the same result as if U = −kW , i.e. as if the right-hand side of W = 2W (19.135) were zero. Both these parametrisations have been used in various papers; see Krasi´nski (1997) and Section 19.6.3. In general, this family of spacetimes has no symmetry (Bonnor, Sulaiman and Tomimura (1977) and Exercise 10). However, when U = kW and V1 = V2 = 0, it acquires a 3-dimensional symmetry group acting on 2-dimensional orbits; the symmetry is spherical, plane or hyperbolic when k > 0, k = 0 or k < 0, respectively. In the general case, a certain quasi-symmetry is present: the surfaces given by t = constant z = constant have constant curvature proportional to k. The lack of symmetry in the spaces t = constant is due to the spheres being placed non-concentrically (when k > 0) and to the ‘planes’ being nonparallel (when k = 0). The orbits of the O(3) group of (19.139) have nothing to do with the 2-surfaces of constant curvature present in the general Szafron spacetime: the former are the spheres on which x2 + y2 = constant, the latter are surfaces of constant z. In contrast to this, the Datt–Ruban limit results in a natural way: the 2-surfaces of constant curvature become orbits of the symmetry group; for example, the spheres become concentric when k > 0 and the ‘planes’ become parallel when k = 0. An explicit solution of (19.138) and (19.135) corresponding to p = − (i.e. to dust with a cosmological constant) was given by Barrow and Stein-Schabes (1984); it involves elliptic functions. When p = 0, Eq. (19.138) has the same solutions as those given in Section 17.4. Equation (19.135) can then be solved explicitly, too. We shall come back to these solutions in Section 19.6.

19.5.2 The z = 0 subfamily We go back to Eq. (19.114) and consider the case when ut z = 0. Then e =

z  ut z

(19.141)

and the first of (19.113) becomes e ut = 0, whose solution is e = t zezxy 

(19.142)

19.5 The Szekeres–Szafron family of solutions

393

def

where  = 1/u. It follows that tx = ty = 0. Equation (19.141) implies e = t zz , and an arbitrary factor dependent on z can be introduced in e by a transformation of the form z = fz . This will simplify the limiting transition to the Robertson–Walker models. Thus, e = hzt zz 

(19.143)

where hz is an arbitrary function. The equation G11 = p, in consequence of (19.141), (19.142) and (19.107), becomes   def e−2 xx + yy + 1/h2 = 2tt + t 2 + p2 = − kz (19.144) the last part of the equation follows because the left-hand side does not depend on t, while the middle part does not depend on x and y. The function kz is unknown, and it will remain arbitrary. We can now repeat the reasoning in Eqs. (19.120)–(19.128), with the modification that the functions , ,  ,  , f and f now depend on z. The metric (19.123) and its curvature were only an auxiliary construction that helped us guess the substitution (19.124) that reduced Eq. (19.122) to (19.126). However, the reasoning that led to (19.129) is no longer valid because it involved coordinate transformations in the x y subspace. Thus, e− will have here a form analogous to (19.127), but with the coefficients being arbitrary functions of z:   (19.145) e− = Az x2 + y2 + 2B1 zx + 2B2 zy + Cz while t z is defined by the equation kz tt t 2 + 2 + pt + 2 = 0

(19.146)    This shows that t z can be redefined by  → fz, which will result only in rescaling kz. In consequence of (19.144), the functions Az, B1 z, B2 z, Cz, hz and kz must obey  1 (19.147) AC − B1 2 − B2 2 = 1/h2 z + kz

4 All the Einstein equations are now satisfied, and G00 =  defines the matter-density. In order to make the transition to the L–T limit easier, we will represent the solution of (19.146) by the formal integral  3 2Mz    − kz − p dt (19.148) t 2 =  3 t 2

and then the matter-density is given by    −1 2Mz  = e e z 2  2 3  3  6Mz   z     + − dt − dt  p p 2 2 2  3 tz  t

(19.149)

394

Relativistic cosmology IV

where the first line is all that remains in the L–T limit; see further on. Collecting all the information together, the metric we obtained is given by the formulae   ds2 = dt2 − e2 dz2 − e2 dx2 + dy2  e = t zezxy  e = hzt zz ≡ hz z +z     e− = Az x2 + y2 + 2B1 zx + 2B2 zy + Cz

(19.150)

with the matter-density defined by (19.149), t z obeying (19.146) and the arbitrary functions obeying (19.147). Equation (19.146) can be integrated once pt has been specified. This subfamily, like the preceding one, has in general no symmetry (Exercise 10), and acquires a G3 with 2-dimensional orbits when A B1  B2 and C are all constant (that is, when z = 0). If p = − in addition, then the L–T model results, with z = r and  = R; the metric of the spheres t = constant z = constant can then be transformed to the standard form as explained in Lemmas 19.1 and 19.2 and Exercise 9; for the interpretation def of the coordinates in (19.150) see the next section. The sign of gz = AC − B1 2 − B2 2 determines here the geometry of the surfaces t = constant z = constant in the same way as the sign of k did for (19.136)–(19.138). However here, with A B1  B2 and C being functions of z, the surfaces z = constant within a single space t = constant may have different geometries (i.e. they can be spheres in one part of the space and the surfaces of constant negative curvature elsewhere, the curvature being zero at the boundary). Moreover, the sign of gz is here independent of the sign of kz, so the geometries of these surfaces are independent of the type of evolution. The Robertson–Walker limit in the form (17.80)–(17.82) follows when t z = fzRt k = k0 f 2 and k0 = constant. When B1 = B2 = 0 C = 4A = 1 and f = z in addition, the R–W limit is ‘natural’; its O3 orbits are the spheres from the Szafron z = 0 spacetime, made concentric in the limit. (The additional specialisations of the arbitrary functions amount to a more specific choice of coordinates in the R–W limit.)

19.5.3 Interpretation of the Szekeres–Szafron coordinates The transition from the metric of the 2-surface t = constant r = constant in (19.11) to the metric (19.129) is called a stereographic projection. With  > 0, the surface t = constant r = constant R = 1 in (19.11) has the metric of a sphere of unit radius. With  = 0, the same surface has the metric of a plane. With  < 0, the metric can be visualised as that of a two-sheeted hyperboloid, but in a 3-space with indefinite metric (Exercise 11). In the z = 0 subfamily, where the metric of the 2-surface is (19.129), the transformation is as in Exercise 9:  √ 2/ −k coth/2cos  sin  for k < 0 √ x y = (19.151) 2/ k cot/2cos  sin  for k > 0

19.5 The Szekeres–Szafron family of solutions

395

In the z = 0 subfamily, the metric in the 2-surface t = constant r = constant is not as simple, since the functions A B1  B2 and C depend on z and cannot be transformed away. By the same method as used in Lemma 19.1 it may be verified that A = 0 can be restored in (19.150) by coordinate transformations in the x y surface, even def

if A = 0 initially. Suppose that !2 = 1/h2 + k = 0. Then, writing A = !z /2S B1 = def  − !z P/2S B2 = − !z Q/2S,  = !/ ! and redefining  by  =  !z , we can represent the metric (19.150) as1      S y−Q 2 x−P 2 − def e = = + +  2 S S  z − z /   ds2 = dt2 − dz2 − 2 dx2 + dy2

 − kz  2

(19.152)

2

When ! = 0, the transition from (19.150) to (19.152) is A = 1/2S B1 = −P/2S B2 = −Q/2S and  is unchanged. Then (19.152) applies with  = 0. In all cases, within each single t = constant r = constant surface, the transformation from the   coordinates to the x y coordinates is  = +1 " =0"  = −1 "

x − P y − Q/S = cot/2cos  sin  x − P y − Q/S = 2/cos  sin  x − P y − Q/S = coth/2cos  sin 

(19.153)

The quantity  determines whether the x y 2-surfaces are spherical  = +1, pseudospherical  = −1, or planar  = 0. The geometric interpretation of the stereographic projection (19.153) in the cases  = ±1 is shown in Fig. 19.1. With  = 0, the interpretation of the coordinates in (19.150) is most easily seen when the   coordinates are transformed to the Cartesian coordinates X =  cos  Y =  sin . Then, using (19.153), we find that the transformation x y → X Y is X Y =

2S x − P2 + y − Q2

x − P y − Q

(19.154)

√ which is an inversion with respect to the sphere of radius 2S centred at x y = P Q. The x y coordinates in the cases  = +1 and  = 0 have the range −  + . With  = −1 x and y vary in that range in which  has a constant sign. Coming back to the representation (19.150), we see that, for  = −1 and A = 0,  is zero when x + B1 /A2 + y + B2 /A2 = 1/4A2

 is positive for x and y outside this circle, and is negative for x and y inside it. Figure 19.1 suggests that with  = −1 we should rather take − as the metric function so that x and y have finite rather than semi-infinite ranges. However, both the  > 0 and the 1

 the e− is e− def The tildes were dropped in Eq. (19.152) for better readability. The  in (19.152) is in fact , = e− / ! , and def the kz is  kz = kz/!2 .

396

Relativistic cosmology IV p p

p 2

p

1

1

y–Q

y–Q P

2

a

ϑ

P

a

S

S

Fig. 19.1. The stereographic projection from the   coordinates to the Szekeres–Szafron coordinates x y for a sphere (left) and for a two-sheeted hyperboloid (right). The radius of the sphere is a = 1 a is also half the distance between the vertices of the hyperboloid. A point p1 in the surface with the   coordinates is mapped on the point p2 in the plane with the x y coordinates related to   by (19.153). The point PP is the pole of projection; it lies on the straight line p1 –p2 . S is the distance from the pole to the plane. On the hyperboloid, the coordinate  has no simple metric interpretation, but, similarly to the spherical -coordinate, it determines the distance of the point p1 from the point antipodal to PP. The figure is the cross-section of the setup with the x = P plane. The coordinate in both surfaces is the azimuthal angle around the axis of symmetry that passes through PP.

 < 0 regions are  Szekeres  spacetimes because they are mapped onto one another by x y = x  y / x 2 + y 2 , which interchanges the roles of A and C. The surface area of a t = constant r = constant surface is finite only in the  = +1 case, for which it equals 4R2 . In the other two cases, it is infinite. 19.5.4 Common properties of the two subfamilies Two common properties have already been mentioned: the lack of any symmetry in general and the existence of the surfaces of constant curvature t = constant z = constant. Other properties in common are the following: The Weyl tensor of the Szafron spacetimes has its magnetic part with respect to the velocity field of the source equal to zero (Szafron and Collins, 1979; Barnes and Rowlingson, 1989) and is in general of Petrov type D (Szafron, 1977). It degenerates to zero in the R–W limit only. Rotation and acceleration of the fluid source are zero, the expansion is nonzero, and the shear tensor is 1 diag0 2 −1 −1 where   = 3  tz −t z / for z = 0 = z −z / 

=

t −t /  + 

for z = 0

(19.155)

19.5 The Szekeres–Szafron family of solutions

397

Two eigenvalues of the 3-dimensional Ricci tensor, 3 RAB , of the slices t = constant are also equal, and its eigenframe coincides with that of shear (Collins and Szafron, 1979). The eigenspaces corresponding to the degenerate eigenvalues of shear and of 3 RAB are the surfaces of constant curvature mentioned above. The slices t = constant of these spacetimes are conformally flat (Berger, Eardley and Olson, 1977), i.e. their Cotton–York tensor (7.50) is zero. The curvature of the x y-surfaces is a global constant only in the z = 0 subfamily, and there it is equal to the curvature index of the t = constant slices in the resulting R–W limit. In the z = 0 subfamily, the curvature of the x y-surfaces is determined by gz = AC − B1 2 − B2 2  and is independent of the curvature index of the R–W limit, which is determined by kz. Both kz and gz are constant only within each x ysurface and can vary within a t = constant slice. Even the sign of k is not a global property of a general Universe. Its global constancy is a peculiarity of the R–W class. In the Szafron spacetimes in their full generality, with arbitrary pt, the dynamic equations are not yet solved. The missing element is the equation of state. The favourite equation of state for physicists and astronomers used to be the barotropic one, f p = 0. It produces nontrivial results when p = constant, in particular when p = 0, and this case will be discussed in Section 19.6. When  = p and p = pt, the Szafron spacetimes trivialise: those with z = 0 become R–W, and those with z = 0 acquire either an R–W or a K–S geometry, or the plane and hyperbolic counterparts of the latter (Spero and Szafron, 1978). The Szafron solutions are an example to which the discussion of the thermodynamical interpretation and of the existence of a thermodynamical scheme (see Section 15.5) applies. As shown by Krasi´nski, Quevedo and Sussman (1997), in the z = 0 subfamily Eqs. (15.52) and (15.55) necessarily either make the thermodynamics trivial (because p = constant) or else imply a symmetry group with at least 2-dimensional orbits. Hence, the general z = 0 Szafron spacetimes require an interpretation in terms of a more complicated source than a single-component perfect fluid – it could be a mixture in which chemical reactions occur, or a mixture of two fluids, such as was first introduced by Letelier (1980). In the z = 0 subfamily, there is a subset of solutions that obey (15.52) and (15.55) while still having no symmetry.1

19.5.5 * The invariant definitions of the Szekeres–Szafron metrics The results reported in this subsection will be quoted without proofs. While the results are important and worth knowing, the proofs are rather technical and laborious, and would lead us too far from the subject of cosmology. Interested readers are advised to consult the original papers. 1

We omit the derivation of these results because the formulae involved are rather complicated, while the subcase that admits a thermodynamical scheme without a symmetry has no clear physical interpretation. We refer the reader to the original paper (Krasi´nski, Quevedo and Sussman, 1997).

398

Relativistic cosmology IV

In Section 19.5 we began with the historically earliest definition, through the metric (19.102). Later, a few different coordinate-independent definitions were discovered. The first invariant definition of the whole family was given by Wainwright (1977) for the Szekeres limit p = 0, and then extended by Szafron (1977) to the general case. The general Szafron spacetimes follow when the following properties are assumed: 1. The velocity field of the fluid is geodesic and irrotational. 2. The Weyl tensor is of type D, and the velocity vector of the fluid at every point of the spacetime lies in the 2-plane spanned by the two principal null directions. 3. Any vector orthogonal to both repeated principal null directions is an eigenvector of shear. 4. The 2-surfaces generated by the principal null directions admit orthogonal 2-surfaces. It follows from here that the repeated principal null directions are orthogonal to the surfaces of constant curvature, t = constant z = constant. The principal null directions are not in general geodesic. They become geodesic if and only if the spacetimes acquire local rotational symmetry, that is, a G3 /S2 symmetry group. Szafron and Collins (1979) worked out another invariant definition. The following conditions must be obeyed simultaneously: 1. The metric is a solution of the Einstein equations with a perfect fluid source. 2. The flow lines of the fluid source are geodesic and nonrotating (the last property implies that the flow lines are orthogonal to a family St of spacelike hypersurfaces). 3. Each hypersurface of the family St is conformally flat. 4. Two of the eigenvalues of the Ricci tensor 3 RAB of the hypersurfaces St are equal. 5. Two of the eigenvalues of the shear tensor  are equal. For all spacetimes that have a G3 /S2 symmetry group properties 4, 5 and # = 0 are automatically fulfilled, and property 3 results from u˙  = 0 via the field equations. Hence, these subcases of the Szekeres–Szafron spacetimes are defined only by property 1 and u˙  = 0. If conditions 1–5 are fulfilled, then there exist coordinates in which the metric has the form (19.102). These coordinates are defined up to the following transformations: t = t + C def

u = x + iy

z = fz 

u = gu  + gu 

def

u = x + iy 

(19.156)

where C is an arbitrary constant, f is an arbitrary real function and g is an arbitrary complex function. The proper Szekeres solutions result from the two definitions when the additional requirement p = 0 is made. Yet one more invariant definition was provided by Barnes and Rowlingson (1989): the Szafron spacetimes result from the Einstein equations if the following assumptions are made: 1. The source is a geodesic and rotation-free perfect fluid. 2. The Weyl tensor is purely electric and of Petrov type D.

19.6 The Szekeres solutions and their properties

399

3. The shear tensor has two equal eigenvalues and its degenerate eigensurface coincides with that of the Weyl tensor.

19.6 The Szekeres solutions and their properties 19.6.1 The z = 0 subfamily When p = − = constant, Eq. (19.138) is integrated to t 2 = −k +

2M 1 def + 2 =   3

(19.157)

and, using (19.138), Eq. (19.135) can be integrated to t t +

M 1 − 2 = U + kW + Xz  3

(19.158)

where M is an arbitrary constant and Xz is an arbitrary function (the integral (19.158) is valid only when t = 0, but this will be assumed always to be the case, otherwise the solution is static). The solution of (19.158) can be formally represented as   √ U + kW + Xz =  d + Yz  (19.159)  3/2 where Yz is another arbitrary function. If we want to interpret the constant  as the cosmological constant, then the energydensity has to be redefined by  =   − . Then, from (19.136), (19.157) and (19.158), we obtain 2X + 6M  =

(19.160)  2 e With  = 0, the solutions of (19.157) involve elliptic functions. Each solution will contain an additional arbitrary constant which defines the initial instant of evolution; it can be assumed zero with no loss of generality. The evolution may or may not begin with a Big Bang singularity (a sufficiently large positive  would prevent it), but if it does, then the singularity is necessarily simultaneous in the comoving time t. An additional singularity of infinite density occurs where (and if) e = 0. This is a shell crossing singularity, discussed for the z = 0 subfamily in Subsection 19.7.4 and for the L–T model in Section 18.10. Equation (19.157) is identical to the Friedmann equation, and so are its solutions. Note that M becomes the mass integral in the R–W limit, so in fact it should be assumed positive for ‘physical reasons’. However, a solution exists when M < 0 and k < 0 or  > 0, and it should not be discarded without deeper consideration – which is still missing. The solution (19.159) contains one more arbitrary function Yz, but one of the functions

U V1  V2  W X Y can be specified by a choice of the coordinate z. Hence, the general solution depends on two arbitrary constants (k and M) and five arbitrary functions of z.

400

Relativistic cosmology IV

In the parametrisation in which U = −kW (see the text after (19.140)), Eq. (19.159) reproduces (19.98), with  z Q k = R r 0 . The solution of (19.157)–(19.158) with  = 0 = k involves elementary functions only and was given by Barrow and Stein-Schabes (1984). When M = 0, one can redefine  − X/3M and U = U  − kX/3M, and the result is the same  =  + X/3M, W = W as if X = 0. Thus X = 0 can be assumed without loss of generality whenever M = 0, and the Barrow–Stein-Schabes result is given in such a parametrisation. (We shall keep X for the sake of comparison with other solutions later.) That solution tends asymptotically to the de Sitter spacetime. Both (19.157) and (19.158) have elementary solutions when  = 0; they define the Szekeres (1975a) models with z = 0. The solutions of (19.157) with  = 0 are identical to the Friedmann solutions (17.33)–(17.35). Given  and  = 0, Eq. (19.158) can be integrated to find t z. The results are presented in the papers by Szekeres (1975a) and by Bonnor and Tomimura (1976). We shall avoid displaying the explicit solutions because then the various possible signs of k and M have to be considered separately (but see Section 19.8). Bonnor and Tomimura discussed the evolution of each model. Depending on the case, the metric or the matter-density may or may not approach homogeneity as the initial singularity is approached and as the model evolves to infinity or to a final singularity. The growing and decaying inhomogeneities are both present, just as in the L–T model; see Section 18.19. In the model with k = +1, the spheres t = constant z = constant evidently expand and recollapse just as in the Friedmann k > 0 model – because the function R is here exactly the same. Along the z-direction the space first has infinite extent at the instant of the Big Bang, then collapses to a minimum size, and expands to infinite extent as the final singularity is reached (Barrow and Silk, 1981). The maximum of expansion of the spheres and the minimum of collapse in the z-direction do not in general occur simultaneously. 19.6.2 The z = 0 subfamily When p = − = constant, Eq. (19.146) has the integral 2Mz 1 (19.161) + 2   3 the only difference from (19.157) being the dependence of k, M and  on z. As before, the density is modified to   =  − , and t 2 = −kz +

 =

2Me3 z

e2 e z

(19.162)

Again, with  = 0 the solutions of (19.161) involve elliptic functions. A general formal integral of (19.161) was presented by Barrow and Stein-Schabes (1984). Any solution of (19.161) will contain one more arbitrary function of z that will be denoted tB z, and will enter the solution in the combination t − tB z. The instant t = tB z defines the initial

19.6 The Szekeres solutions and their properties

401

moment of evolution; when  = 0 it is necessarily a singularity corresponding to  = 0, and it goes over into the Big Bang singularity in the Friedmann limit. When tBz = 0 (that is, in general) the instant of singularity is position-dependent, just as it was in the L–T model. As before, another singularity may occur where e z = 0 (if this equation has solutions). This is a shell crossing, but now it is qualitatively different from that in the L–T model. If this singularity is present in the L–T model, then whole spherical shells stick together at it. Here, as can be seen from (19.150), the equation e z = 0 may define a subset of the x y surface. When a shell crossing exists, its intersection with a t = constant space will be a circle, or, in exceptional cases, a single point, not a sphere (see Section 19.7.4). Equation (19.161) is formally identical with the Friedmann equation, but, just as in the L–T limit, with k and M depending on z, each surface z = constant evolves independently of the others. The models defined by (19.150) and (19.161) contain eight functions of z, but only six of them are arbitrary; one can be specified by a choice of z (still arbitrary up to now), the other is determined by (19.147). The elementary solution of (19.161) that results when kz = 0 was presented by Barrow and Stein-Schabes (1984). The solutions of (19.161) with  = 0 are formally identical with Friedmann’s, and define the Szekeres (1975a) models with z = 0. We will present them in the Goode– Wainwright representation in Section 19.8. The subcase AC − B1 2 − B2 2 > 0, in which the t = constant z = constant surfaces are spheres, is the most important one physically. It is called the quasi-spherical Szekeres model. Its properties are discussed in Section 19.7, but two little curiosities are listed below. The mass within the sphere z = r at the time t = t0 is mt0  r =

 t=t0

−g1/2 d3 x = 4



r 0

2Mz hz dz = mr

(19.163)

i.e. it does not depend on time and is given by the same formula as in the spherically symmetric case (Szekeres, 1975a). The density may die off with increasing r so fast that limr→ mr < . The Szekeres spacetime with AC − B1 2 − B2 2 > 0 can be matched to the Schwarzschild solution across a z = constant hypersurface, even though the interior metric still has no symmetry (Bonnor, 1976).

19.6.3 * The z = 0 family as a limit of the z = 0 family The integration of the Einstein equations required that the cases z = 0 and z = 0 be considered separately. Having derived the solutions, we can show now that the z = 0

402

Relativistic cosmology IV

family is a limit of the z = 0 family. The consideration below follows that of Hellaby (1996b), with notation adapted to ours and with some corrections.1 Equation (19.147) does not in fact put any limitations on the functions A, B1 , B2 and C; given A, B1 , B2 , C and k it simply defines the function hz. Choose the arbitrary functions in (19.150) and (19.161) as follows:  1 √ 1 Uz  − k dz + k A= 2 4  1  1 √ √ B1 = B2 = V1 z  − k dz V2 z  − k dz 2 2  √ C = 2Wz  − k dz + 1 M=



h= √

√ Xz  − k dz + M0  1



tB = t1

(19.164)

 √  − k dz + t0 

−k 1 def 1 = 1 + x2 + y2  4 def 1 0 = Uzx2 + y2  + V1 zx + V2 zy + 2Wz 2 where M0 , t1 and t0 are constants. We will take the limit k →  of all these quantities, but first we must check what happens with the other quantities entering the metric under such a reparametrisation. Assuming that each integral becomes zero in the limit k →  (it is up to us to choose the arbitrary constants appropriately) we have    = 0

lim − √ z (19.165) lim e− = 1  k→ k→ −k The limits of the various other quantities are M → M0 

tB → t 0 

k → 

tBz M → t1  √ z → Xz √ −k −k k √ z → −2U + W

−k

(19.166)

Knowing this, we define def

lim t z = 1 t

k→

1

 def lim √ z = t z

k→ −k

(19.167)

As given, the limit in Hellaby (1996b) reproduces only the subcase of the z = 0 Szekeres solution in which U , V1 , V2 and W are all constant.

19.7 Properties of the quasi-spherical Szekeres solutions

403

This 1 obeys (19.157) √ with k =  and M = M0 . Then we differentiate (19.161) by z, divide the result by  − k, take the limit k →  and use (19.166)–(19.167), and find that t z obeys (19.158). Using (19.164)–(19.166) in (19.150) we finally obtain ds2 = dt2 −  − 1 1 /0 2 dz2 − 1 /0 2 dx2 + dy2 

(19.168)

which coincides with (19.137). Thus the z = 0 Szekeres solutions are a limit of the z = 0 solutions, also when  = 0. Since (19.161) is the same as (18.14), we can use here Eq. (18.104), with z = r, R =  and E = −k/2, to write in the  = 0 case:      Mz kz 3kz Mz (19.169) − + − t − tB  − tBz t

z = M k 2k M Using this and (19.167), we can verify that the explicit solution for  that results from (19.169) in the limit k →  coincides with (19.101). 19.7 Properties of the quasi-spherical Szekeres solutions with z = 0 =  This subclass of the Szekeres models is physically the most important and has been best investigated. With the exception of Subsection 19.7.8, the material in this section is repeated after Hellaby and Krasi´nski (2002). We will represent the quasi-spherical Szekeres solution with z = 0 in the parametrisation introduced in (19.152). The metric is ds2 = dt2 −

z −z /2 2 2 dz − 2 dx2 + dy2  −k 

(19.170)

and the formula for density in these variables is  =

2Mz − 3Mz /

2 z − z /

(19.171)

19.7.1 Basic physical restrictions We choose  ≥ 0 ( = 0 is an origin, the bang or the crunch; in no case is a continuation to negative  possible) and Mz ≥ 0, so that any vacuum exterior has positive Schwarzschild mass. We require the metric to be non-degenerate and nonsingular, except at the bang or crunch. Since dx2 + dy2 / 2 maps to the unit sphere, plane or pseudosphere, Sr = 0 is needed for a sensible mapping, so S > 0 is a reasonable choice. In the cases  = 0 and  = −1,  necessarily goes to zero at certain x y values where the mapping is badly behaved. For a well-behaved z-coordinate, we need to require >

z − z /2 > 0 −k

(19.172)

404

Relativistic cosmology IV

i.e. −k > 0 except where z −z /2 = 0. Quasi-pseudo-spherical regions,  = −1, then require k ≤ −1, hence they may exist only in hyperbolic spatial sections. Similarly, quasi-planar regions,  = 0, may exist only in parabolic or hyperbolic spatial sections, k ≤ 0, whereas quasi-spherical regions are possible for all k ≤ 1. In the Lemaître–Tolman limit (z = 0  = 1), the equality 1 − k = 0 = z 2 can occur in closed models where  = R on a spatial section is at a maximum, or in wormhole models where it is minimum, z t rm  = 0 ∀t. These can only occur at constant z and must hold for all x y values. We will consider maxima and minima in Section 19.7.5. The density must be positive, and the Kretschmann scalar R R must be finite, which adds either or

Mz − 3Mz / ≥ 0 Mz − 3Mz / ≤ 0

and and

z − z / ≥ 0 z − z / ≤ 0

(19.173) (19.174)

If z −z / passes through 0 anywhere other than at a regular extremum, we have a shell crossing.

19.7.2 The significance of The Szekeres metric is covariant with the transformations z = g z, where g is an arbitrary function. Hence, if z < 0 in the neighbourhood of some value z = z0 , we can take g = 1/ z and obtain d/d z > 0. Therefore, z > 0 can always be assumed to hold in some neighbourhood of any z = z0 . However, if z changes sign somewhere, then this is a coordinate-independent property. As seen from Eq. (19.152), with  = +1  is always nonzero. Since the sign of  is not defined by the metric, we can assume that  > 0. Can z change sign?   1   Sz − x − P2 + y − Q2 /S 2 +  2   − x − PPz + y − QQz /S

z =

The discriminant of this with respect to x − P is   S 2 1 S x = 2 − z2 y − Q2 − 2 z y − QQz + Pz 2 + Sz 2

S S S The discriminant of x with respect to y − Q is   y = 4Sz 2 Pz 2 + Qz 2 + Sz 2 /S 6

(19.175)

(19.176)

(19.177)

Since, with  = +1, this is never negative, the equation z = 0 will always have at least one solution (in exceptional situations) and in general will have two. The two exceptional situations are when y = 0. They are as follows:

19.7 Properties of the quasi-spherical Szekeres solutions

405

(i) Sz = 0 at z = z0 . Then z z0  = 0 has a family of solutions anyway, but the solutions define a straight line in the x y plane. This will be dealt with below (see after Eq. (19.187)). (ii) Sz = Pz = Qz = 0 at z = z0 . Then z ≡ 0 at z = z0 , and we see from Eq. (19.171) that  will be spherically symmetric there. When y > 0, x will change sign at the following two values of y:    2 2 2 y12 = Q + S −Qz ± Pz + Qz + Sz /Sz

(19.178)

For every y such that y1 < y < y2 there will be two values of x (and one value of x when y = y1 or y = y2 ) such that z = 0. They are    S y − Q Qz 2 Pz 2 + Qz 2 ±S − + + 

(19.179) + x12 = P − Pz Sz S Sz Sz 2 The regions where z is positive and negative depend on the sign of Sz . If Sz > 0, then z > 0 for x < x1 and for x > x2 ; if Sz < 0, then z > 0 for x1 < x < x2 . z = 0 for x = x1 and x = x2 , but note that x1 and x2 are members of a continuous family labelled by y. All the values of x and y from (19.178)–(19.179) lie on the circle    2  2 x − P − Pz S/Sz  + y − Q − Qz S/Sz  = S 2 Pz 2 + Qz 2 /Sz 2 +  

(19.180) The centre of this circle is at the point x y = P − Pz S/Sz  Q − Qz S/Sz   and its radius is Lz =0 = S



 Pz 2 + Qz 2 /Sz 2 + 

(19.181)

(19.182)

Thus, with Sz > 0, the function z is negative inside the circle, zero on the circle and positive outside it. We will consider the variation of z x y around the spheres of constant t and z. Setting  = +1 and applying the transformation (19.153) to (19.152) and to its derivative gives  = S/1 − cos  Sz cos  + sin  Pz cos + Qz sin   1 − cos  S cos  + sin  Pzz cos + Qzz sin  zz = − zz 1 − cos  Sz Sz cos  + sin  Pz cos + Qz sin  +2 S 1 − cos    + Sz 2 + Pz 2 + Qz 2 /S

z = −

(19.183) (19.184)

(19.185)

406

Relativistic cosmology IV

The locus of z = 0 is Sz cos  + Pz sin  cos + Qz sin  sin = 0

(19.186)

Writing z = cos , y = sin  cos and x = sin  sin , we see that x y z is on a unit sphere through (0, 0, 0), and (19.186) becomes Sz z + Pz x + Qz y = 0, which is the equation of an arbitrary plane through (0, 0, 0). Such planes all intersect the unit sphere along great circles, therefore z = 0 is a great circle, with locus (19.187) tan  = −Sz / Pz cos + Qz sin 

 The plane has unit normal Pz  Qz  Sz / Pz 2 + Qz 2 + Sz 2 . Now it is easy to understand the meaning of the special case Sz = 0 mentioned after Eq. (19.177). As seen from (19.187), with Sz = 0 we have  = 0, which means that the great circle defined by z = 0 passes through the pole of stereographic projection. In this case, the image of the circle z = 0 on the x y plane is a straight line passing through x y = P Q, as indeed follows from (19.175). z has a different sign on each side of the straight line. Compare this also with Figs. 19.2 and 19.3. The other special case, z ≡ 0, corresponds to the spherically symmetric subcase. Then, the positions of the great circle from Eq. (19.186) and of the poles from Eq. (19.193) are undetermined. From (19.184) and (19.183) we find   (19.188) z / = − Sz cos  + sin  Pz cos + Qz sin  /S thus z / = constant ⇒ Sz z + Pz x + Qz y = S × constant

(19.189)

which is a plane parallel to the z = 0 plane, implying that all loci of z / = constant are circles parallel to the z = 0 great circle. The locations of the extrema of z / are found as follows: sin  Pz sin − Qz cos  Q z / = = 0 ⇒ tan e = z  S Pz ⇒ cos e = 1 

Pz



Pz 2 + Qz 2

1 = ±1

z / S sin  − Pz cos  cos − Qz cos  sin = z =0⇒  S  Pz 2 + Qz 2 P cos e + Qz sin e tan e = z = 1  Sz Sz cos e = 2 

Sz Sz 2 + Pz 2 + Qz 2



2 = ±1

(19.190)

(19.191) (19.192)

19.7 Properties of the quasi-spherical Szekeres solutions

407

The extreme value is then

 z /extreme = −2 Sz 2 + Pz 2 + Qz 2 /S

(19.193)

Since  P  Qz  Sz   sin e cos e  sin e sin e  cos e  =  2 z Pz 2 + Qz 2 + Sz 2 Eq. (19.184) shows that the extreme values of z / are poles to the great circles of z = 0. Clearly z / has a dipole variation around each constant-z sphere, changing sign when we go over to the antipodal point:   →  −  + . Writing   (19.194) z − z / = z +  Sz cos  + sin  Pz cos + Qz sin  /S we see that z / is the correction to the radial separation z of constant-z shells, due to their not being concentric. In particular, Sz /S is the forward ( = 0) displacement, and Pz /S and Qz /S are the two sideways displacements  = /2 = 0 and  = /2 = /2. The shortest ‘radial’ distance is where z / is maximum. It will be shown in Subsection 19.7.4 that, where z > 0, z / ≤ Mz /3M and z / ≤ z / are required to avoid shell crossings, and also z / > Mz /3M in Eq. (19.234). These inequalities, together with Mz > 0, imply that the density given by def

(19.171), as a function of x = z / =

2Mz 1 − 3Mx/Mz 2 z 1 − x/z

(19.195)

has a negative derivative by x x =

/z − 3M/Mz 2Mz · < 0 1 − x/z 2 2 z

(19.196)

so the density is minimum where z / is maximum.

19.7.3 Conditions of regularity at the origin For reference, we write out the evolution equations of the Szekeres models, even though they are identical to those of the L–T and Friedmann models. The function  = t z satisfies the Friedmann equation for dust that follows from (19.161) as the limit  = 0: t 2 = 2Mz/ − kz

(19.197)

where Mz and kz are arbitrary functions. It follows that the acceleration of  is always negative, tt = −M/2

(19.198)

408

Relativistic cosmology IV

The function Mz plays the role of the active gravitational mass within the sphere of coordinate radius z. We assume that M ≥ 0 and  ≥ 0. In (19.197) −kz represents twice the energy per unit mass of the particles in the shells of matter at constant z, but in the metric (19.170) it also determines the geometry of the spatial sections t = constant. The solution of (19.197) depends on the sign of k; it can be (1) hyperbolic (when k < 0): =−

M cosh $ − 1 k

(2) parabolic (when k = 0):

sinh $ − $ =

−k3/2 t − tB   M

1/3    = 9Mt − tB 2 /2

(19.199)

(19.200)

(3) elliptic (when k > 0): $ − sin $ = k3/2 t − tB /M

 = M1 − cos $/k

(19.201)

where tB z is an arbitrary function, giving the local time of the Big Bang or Crunch  = 0, and  = ±1 permits time reversal. More correctly, the three types of evolution hold for k/M 2/3 < 0 = 0 and > 0, since k = 0 at a spherical type origin for all three evolution types (see further on in this subsection). The behaviour of t z is identical to that of Rt r in the L–T model, and is unaffected by the dependence of the Szekeres solutions on the x y coordinates. When  = +1,  = 0 occurs at an origin of spherical coordinates (which we assume to be at z = 0; this can always be satisfied by a transformation of z), i.e. t 0 = 0, ∀t, where the 2-spheres have no size. Similarly, t t 0 = 0 = tt t 0, etc. ∀t. There will be a second origin, at z = zO say, in any closed, regular, k > 0 model. Thus, by (19.201), (19.199) and (19.197)–(19.198), for each constant $   lim k = 0 lim k2 /M = 0

(19.202) limM/k = 0 z→0

z→0

z→0

The type of time evolution at the origin must be the same as that of its neighbourhood, i.e., along a constant-t slice away from the bang or crunch, by (19.201) and (19.199),   (19.203) 0 < lim k 3/2 t − tB /M <

z→0

Clearly, we need M → 0, k → 0 and

  0 < lim k 3/2 /M <

z→0

Using de l’Hôpital’s rule, this gives   lim 3Mkz / 2Mz k = 1

z→0

(19.204)

(19.205)

The density and the Kretschmann scalar   def

= R R = 2 42 /3 − 8/3 + 32 

(19.206)

19.7 Properties of the quasi-spherical Szekeres solutions

409

where def

 = 6M/R3

(19.207)

is the mean density within the ‘radius’ z, must be well behaved. We do not consider a vacuum region of finite size at the origin (since that is just Minkowski space) or a single vacuum point at the origin. Because  and  evolve differently, we also need 6M 2M = lim 2 z < 3 z→0  z→0  z

0 < lim

⇒

3z M =1 z→0 Mz

lim

(19.208)

and 0 < lim

z→0

2 Mz − 3Mz / 2Mz 1 − 3Mz /Mz  = lim <

· 2 z − z / z→0 2 z 1 − z /z 

We have 2

   z M2 3Mkz = 3 1 − cos $ − 1 − sin $$ − sin $ Mz k 2Mz k    k3/2 tBz Mkz 1 − cos $2 − + 1− sin $  Mz Mz k

(19.209)

(19.210)

where, in consequence of (19.204) and (19.205), the first term is zero and the second finite non-zero at an origin for all 0 < $ < 2. Thus, we need only limz→0 MtBz /Mz < . Lastly, the metric must be well behaved, so  should have no unusual behaviour, such as S = 0, that would compromise a valid mapping of dx2 + dy2 / 2 to the unit sphere. Also, to ensure that the rate of change of the proper radius with respect to the areal radius is that of an origin, grr /z 2 should be finite: z − z /2 < z→0 1 − kz 2   3Mz 2 0 < lim 1 − < z→0 Mz     Mz  < and − ≤ lim  z→0 Mz   0 < lim

⇒ ⇒

(19.211)

(19.212)

   Mz  1  =  lim  z→0 Mz   3

(19.213)

where the last of (19.208) has been used. This should hold for all x y, i.e. all  . Thus (19.188) gives      MSz   MPz    <    <  − ≤ lim  − ≤ lim  z→0 Mz S  z→0 Mz S  (19.214)    MQz    <  − ≤ lim  z→0 Mz S  all three limits being different from 1/3. All of the above suggests that, near an origin, M ∼ 3 

k ∼ −2 

S ∼ n 

P ∼ n 

Q ∼ n 

n ≥ 0 (19.215)

410

Relativistic cosmology IV

The condition z / ≤ Mz /3M that will be obtained in the next subsection implies that n ≤ 1 near an origin.

19.7.4 Shell crossings def

A shell crossing, if it exists, is the locus of zeros of the function % = z / − z . Suppose that % = 0 holds for all z at some t = t0 . This leads to Sz = Pz = Qz = z = 0. Since P, Q and S depend only on z, this means that they are constant throughout the spacetime. As seen from (19.171), the Szekeres metric reduces then to the L–T metric, so this case need not be considered. Suppose that % = 0 holds for all t at some z = z0 . This is an algebraic equation in x and y whose coefficients depend on t and z. Taking the coefficients of different powers of x and y we find Pz = Qz = Sz = z = 0, but this time these functions vanish only at z = z0 , while z t z0  will vanish for all t. This will either be a singularity (when Mz z0  = 0) or a neck (when Mz z0  = 0, see Section 18.10). Hence, % = 0 except at a shell crossing or at special locations. Now z > 0 and % < 0 cannot hold for all x and y. This would lead to z > z / > 0, and we know that z cannot be positive at all x and y. Hence, with z > 0, there must be a region in which % > 0. By a similar argument, z < 0 and % > 0 cannot hold for all x and y, so with z < 0 there must be a region in which % < 0. Assuming z > 0, can % be positive for all x and y? Writing    1 Sz z  + x − P2 + y − Q2 %= 2S S     1 Sz z 1 − + x − PPz +y − QQz  − S (19.216) 2 S  S the discriminants of this with respect to x − P and y − Q are   Pz 2 1 Sz z + x = 2 − 2 S S S      Sz z Sz z × + y − Q2 + 2y − QQz − −  (19.217) S  S      1 Sz z 2 Pz 2 + Qz 2 + Sz 2 z 2

(19.218) −  + y = 4 2 S S  S2 2 Thus % will have the same sign for all x and y (i.e. there will be no shell crossings) when y < 0, that is, if and only if Pz 2 + Qz 2 + Sz 2 def 2 z 2 >  = & z

2 S2 When  = 0, this can fail only at those points where z = 0.

(19.219)

19.7 Properties of the quasi-spherical Szekeres solutions

411

If z 2 /2 = & 2 , then y = 0, so x = 0 at just one value of y = ySS . With this value of y, % = 0 at one value of x = xSS . In this case, the shell crossing is a single point in the constant-t z-surface, i.e. a curve in a space of constant t and a 2-surface in spacetime. If z 2 /2 < & 2 , then the locus of % = 0 is in general a circle (a straight line in the special case Sz /S = −z /) in the x y plane. The straight line is a projection onto the x y plane of a circle on the sphere of constant t and z, and hence is not really any special case. When y > 0z 2 /2 < & 2 , the two limiting values of y at which x changes sign are √ −Qz ± y12 = Q +  Sz /S + z /   def = Pz 2 + Qz 2 +  Sz 2 − S 2 z 2 /2  (19.220) and then for every y such that y1 < y < y2 there are two values of x (only one if y = y1 or y = y2 ) such that % = 0. These are   2 −Pz ± − Sz /S + z / y − Q − Qz + x12 = P +

(19.221) Sz /S + z / The x and y obeying (19.221) lie on a circle with the centre at   Qz Pz xSC  ySC  = P − Q−  (19.222) Sz /S + z / Sz /S + z / √ and with the radius LSC = /Sz /S + z /. This is in general a different circle from the one defined by z = 0. As seen from (19.216), the shell crossing set intersects with the surface of constant t and z along the line z / = z / = constant. As noted after Eq. (19.189), this is a circle that lies in a plane parallel to the z = 0 great circle. It follows that the z = 0 and SC circles cannot intersect unless they coincide. Now we will consider the conditions for avoiding shell crossings. These were worked out by Szekeres (1975b) and improved upon by Hellaby and Krasi´nski (2002). The account here is based on the latter reference. For positive density, (19.171) shows that Mz − 3Mz / and % must have the same sign. Consider the case when both are positive. When Mz − 3Mz / ≤ 0 and % < 0, the inequalities in all the following should be reversed. Both Mz −3Mz / and % can be zero for a particular x y value if Mz /3M = z /, but the latter cannot hold for all time. This case can hold for all x y only if Mz = 0 z = 0 and z = 0, which requires all of Mz  kz  tBz  Sz  Pz and Qz to be zero at some z value. Consider the inequality Mz −3Mz / ≥ 0. It must hold for all values of z /, including the extreme value (19.193), for which

 Sz 2 + Pz 2 + Qz 2 Mz z  ≥ ∀z

(19.223) = 3M S  max

412

Relativistic cosmology IV

It is obvious that this is sufficient, and also that Mz ≥ 0 for all z. We will now consider % > 0 for all three types of evolution. Hyperbolic evolution, k < 0. For hyperbolic models, we can write:   −k3/2 tBz z Mz kz 3 = 1 − '4  + '4 − 1 − '5   M k 2 M

(19.224)

where def

'4 =

sinh $sinh $ − $  cosh $ − 12

def

'5 =

sinh $

cosh $ − 12

(19.225)

At early times, when $ → 0, we have  → 0 '5 → + and '4 → 2/3. Thus the term with '5 dominates and goes to ± , its sign being determined by −−k3/2 tBz /M. Consequently, % > 0 implies tBz < 0

∀z

(19.226)

Similarly, at late times, where $ → , we have  →  '5 → 0 '4 → 1 and z / → 1 kz /k, so that 2 z / − z / > 0

⇒

kz /2k − z / > 0

(19.227)

Following the above analysis of Mz −3Mz / ≥ 0 we obtain  kz /2k > Sz 2 + Pz 2 + Qz 2 /S ∀z

(19.228)

which obviously implies kz < 0 ∀z. Since we already have Mz ≥ 0, this is sufficient, and implies z > 0. Parabolic evolution, k = 0. The $= √ easiest way to obtain the conditions for the case k = 0 kz = 0 is to put  $/ −k > 0 in the hyperbolic case, and take the limit k → 0 $ → 0. All terms involving kz /k cancel out and we retain conditions (19.226) and (19.223). Naturally, (19.228) ceases to impose any limit. Elliptic evolution, k > 0. For elliptic models, the following holds:   k3/2 tBz z kz 3 Mz (19.229) = 1 − '1  + '1 − 1 − '2   M k 2 M where def

'1 =

sin $$ − sin $  1 − cos $2

def

'2 =

sin $

1 − cos $2

(19.230)

At early times $ → 0 and  → 0 '2 → + , '1 → 2/3. Thus the term containing '2 dominates and, by the same argument as in the hyperbolic case, (19.226) is needed to keep z / − z / > 0. Similarly, at late times, $ → 2  → 0,

19.7 Properties of the quasi-spherical Szekeres solutions

413

'2 → −  '1 → − and '2 /'1 → 1/2. Consequently, 3/2 z / − z / > 0 now gives   2M Mz 3kz − + tBz > 0 ∀z (19.231) k3/2 M 2k which says that the crunch time must increase with z. Since we already have Mz ≥ 0, these conditions are sufficient to keep z > 0 for all $. We now show that the above also ensure % > 0. Since the crunch time is tC = tB + 2M/k3/2 

(19.232)

   tBz 2 2 − '1 − − '1 + 2'2

3 tC − tB 3

(19.233)

we can rewrite (19.229) as tCz Mz z = +  3M tC − tB 



The derivative of 2/3 − '1  is 2$ − 3 sin $ + $ cos $/1 − cos $2 , and the third derivative of the numerator of the latter is $ sin $. It follows that 2/3 − '1 ≥ 0 and declines monotonically from + to 0 as $ goes from 2 to 0. Since 2/3 − '1 + 2'2  is the mirror image in $ =  of 2/3 − '1 , we have that z / > Mz /3M

(19.234)

so that (19.223) guarantees that for each given z, the maximum of z / as x y are varied is no more than the minimum of z / as $ varies. Although (19.231) implies kz /2k < Mz /3M, a condition such as (19.228) is not needed in this case.

19.7.5 Regular maxima and minima Certain topologies necessarily have extrema in . For example, closed spatial sections have a maximum areal radius, and wormholes have a minimum areal radius, i.e. z t zm  = 0 ∀t. def

Suppose that  − k = 0 at some z = zm . We need %1 = z −z / = 0 to keep grr finite, and hence Mz −3Mz / = 0 (from (19.171)) to keep  finite, both holding ∀t x y at that zm . More specifically, along any given spatial slice away from the bang or crunch, we want √ 0 < L <  (19.235) %1 /  − k → L Mz −3Mz / /%1 → N

0 ≤ N <

(19.236)

In consequence of (19.188), (19.224) and (19.229), %1 = 0 implies Mz = kz = tBz = Sz = Pz = Qz = 0

(19.237)

414

Relativistic cosmology IV

The limits (19.235) and (19.236) must hold good for all t and for all x y, so using (19.152), (19.224) and (19.229) with  > 0, M > 0 and S > 0 shows that M √ z  −k S √ z  −k

k √ z  −k P √ z  −k

tBz  √ −k Q √ z  −k

 √ z  −k  √ z −k

(19.238) (19.239)

must all have finite limits at z → zm . Using de l’Hôpital’s rule, each of the above limits can be expressed in the form √ 2Mzz  − k def 2Mzz M def LMz  = lim √ z = − =−

k→ kz Lkz  −k

(19.240)

19.7.6 The apparent horizons With  = +1, a general null vector field k obeys       2 %2 dx 2 2 dy 2 dz

= 1− 2 + 1 − k dt  dt dt

(19.241)

At each event dz/dt is maximal where kx = 0 = ky . Since  is independent of x y, this also gives the direction of maximum d/dt null at any event. We will call √ this ‘radial’ motion, and its paths ‘rays’. Thus, the differential equation dt/dz n = j%1 / 1 − k, j = ±1, when solved, would give t = tn z along the ‘ray’. In general, this is not a geodesic, but we regard it as the limit of a sequence of accelerating timelike paths, and thus the boundary to possible motion through a wormhole. The areal radius along a ‘ray’ is n = tn z z. These rays stop diverging when n z = 0, where, using the previous formulae, √ 2M/ − k + z  n z = t tn z + z = !j%1 √ 1−k

! = ±1

(19.242)

Light rays initially moving along constant x and y will not remain so. However, since these ‘radial’ directions are at each point the fastest possible escape route, we define this locus to be the apparent horizon (AH). At an ordinary spacetime point the metric components will be nonzero. Assuming that  is increasing with z on constant-t slices, i.e. that z > 0 and %1 > 0, for a solution of n z = 0 to exist, we must require !j = −1, i.e. either j = +1 ! = −1 (outgoing rays in a collapsing phase ⇐⇒ future AH, denoted AH+ ) or j = −1 ! = +1 (incoming rays in an expanding phase ⇐⇒ past AH, denoted AH− ). By ‘outgoing’ we mean moving away from the neck at z = 0. A ray passing through the neck would change from incoming to outgoing at z = 0, and, since z flips sign there, j would also have to flip there.

19.7 Properties of the quasi-spherical Szekeres solutions

415

√ def √ Now define D = 1 − k− 2M/ − k. Then D > 0 ⇐⇒  > 2M). Since M/ > 0, we see that D ≥ 1 leads to a contradiction, and hence D < 1, but D < −1 is not prohibited. We have   √  (19.243) D < −1 =⇒  < M 1 + 1 − k

This will always occur when  is close to the Big Bang/Big Crunch. Using D, the equation of the AH, Eq. (19.242), is z + Dz  = 0 and in terms of x and y this equation is   Sz /S − Dz / x − P2 + y − Q2     Sz  + 2 x − PPz + y − QQz − S 2 + D z = 0

S 

(19.244)

(19.245)

The discriminant of this with respect to x − P is   Sz  −D z x = 4Pz 2 − 4 S      Sz z z Sz 2 2 × −D y − Q + 2y − QQz −S +D

(19.246) S  S  The discriminant of this with respect to y − Q is  2    2  Sz Sz  2 2 z y = 64 Pz 2 + Qz 2 + S 2

− D −D z S  S2 2

(19.247)

Now, if y < 0 everywhere, then x < 0 for all y, in which case there is no x obeying (19.244), i.e. the apparent horizon does not intersect this particular surface of constant t z. If y = 0, then x < 0 for all y except one value y = y0 , at which x = 0. At this value of x = x0 , (19.244) has a solution, so the intersection of the apparent horizon with this one constant-t z surface is a single point. Note that the situation when the apparent horizon touches the whole 3-dimensional t = constant hypersurface at a certain value of t is exceptional; this requires, from (19.244), that Pz = Qz = Sz = z = 0 at this value of t. The first three functions being zero mean just spherical symmetry, but the fourth one defines a special location, as mentioned at the beginning of Section 19.7.4. These equations hold in the Datt–Ruban solution; see Section 19.4. If y > 0, then x > 0 for every y such that y1 < y < y2 , where √ −Qz ±  y12 = Q +  Sz /S − Dz / (19.248)  2 2  def 2 2 2 2 2 2  = Pz + Qz + S Sz /S − D z /

416

Relativistic cosmology IV

and then a solution of (19.244) exists given by   2 −Pz ± − Sz /S − Dz / y − Q + Qz +  x12 = P +

Sz /S − Dz /

(19.249)

Except for the special case when Sz /S = Dz /, these values lie on a circle in the x y plane, with the centre at   Qz Pz xAH  yAH  = P − Q−  (19.250) Sz /S − Dz / Sz /S − Dz / √ and with the radius LAH = /Sz /S − Dz /. The special case Sz /S = Dz / (when the locus of AH in the x y plane is a straight line) is again an artefact of the stereographic projection because this straight line is an image of a circle on the sphere. In summary, the intersection of AH with the x y plane is (1) nonexistent when z 2 /2 > & 2 /D2 (this is the & defined in (19.219) for the shell crossing); (2) a single point when z 2 /2 = & 2 /D2 ; (3) a circle or a straight line when z 2 /2 < & 2 /D2 . The condition z 2 /2 < & 2 /D2 is consistent with the condition for no shell crossings, Eq. (19.219), when D < 1. We already know that necessarily D < 1, but D < −1 is not excluded. With D < 1, when the intersection of the AH with t = constant r = constant is a single point, a shell crossing is automatically excluded. From (19.244) and from  > 0,  > 0 and z > 0 we have D > 0 =⇒ z < 0

D < 0 =⇒ z > 0

(19.251)

But D > 0 and D < 0 define regions independent of x and y. Hence, on that surface on which D > 0, z < 0 on the whole of the AH. Where D < 0, z > 0 on the whole of the AH. This implies that the z = 0 circle and the AH cannot intersect unless they coincide. Indeed, these circles lie in parallel planes, by the same argument that was used following Eq. (19.189): the line on the t z = constant surface defined by (19.244) has the property z / = −Dz / = constant, so it must be a circle in a plane parallel to the z = 0 great circle. It follows that of the three circles (z = 0, SC and AH) no two can intersect unless they coincide. When the z = 0 and AH circles are disjoint, they may be either one inside the other or each one outside the other. However, when projected back onto the sphere, these two situations turn out to be topologically equivalent: depending on the position of the point of projection, the same two circles may project on the plane either as one circle inside the other or as two separate circles; see Figs. 19.2 and 19.3. Along  = 2M n z = z 1 + !j − z / so  = 2M does not coincide with the AH except where z = 0.

(19.252)

19.7 Properties of the quasi-spherical Szekeres solutions

417

C2

C1

P1

P2

Fig. 19.2. The circles C1 and C2 on a sphere (seen here edge on) will project onto the plane (seen here as the horizontal line) as the circles P1 and P2 that are outside each other. Only parts of P1 and P2 are shown here. Circle C1 is the z = 0 set; circle C2 is the apparent horizon circle.

C1

C2

P1 P2

Fig. 19.3. The same circles as in Fig. 19.2 projected onto a plane from a different pole will project as one inside the other. The transition from the situation of Fig. 19.2 to that of Fig. 19.3 is continuous and occurs when the sphere is rotated, but the pole and the plane are not moved. Then one of the circles (C1 when a clockwise rotation is applied to Fig. 19.2) will pass through the pole at one value = 0 of the rotation angle. Its image on the plane acquires a larger and larger radius with increasing , until it becomes a straight line when = 0 . When increases further, the straight line bends in the opposite direction and surrounds P2.

Equation (19.242) with !j = −1 can be written 2  2M 1 − z / z  2M1 − V2  AH =  2  = 1 − k2V − V 2   1 − k 1 − 1 − z / z  def

V = z / z 

(19.253)

The effect of z x y is to create a dipole in the geometry and density around each t z shell, with z = 0 on an ‘equator’, and extreme values given by (19.193) at the poles.

418

Relativistic cosmology IV

The ‘radial’ displacements between two nearby surfaces of constant z are shortest where z / is maximum, and light rays move outwards fastest (maximum dz/dt, minimum dt/dz). It has also been shown that the density is minimum here. The longest ‘radial’ displacements, slowest light ray motion and maximum density occur at the opposite pole. We will call the direction where z / is maximum the ‘fast’ pole and that where z / is minimum the ‘slow’ pole. From (19.223) and (19.234) we have V 2 < 1

1 − V2 > 0

−3 < 2V − V 2 < 1

(19.254)

In those places on the AH where V = 0 = z we see that the surface  = 2M intersects the AH at all times, but the AH is a kind of oval with half inside  = 2M and half outside. For k = 1, AH /2M = 1 regardless of V . Thus the AH+ and AH− cross in a 2-sphere at the neck k = 1 at the moment of maximum expansion  = 2M, as in the L–T model. At the bang, wherever tBz = 0,  → 0 and z → imply V → 0, and the anisotropy becomes negligible. Similarly for the crunch. But in general, for all 0 ≤ k < 1, 4/1 + 3 k  ≥ AH /2M ≥ 0

(19.255)

and AH /2M decreases monotonically as V goes from −1 to 1. We have that AH /2M < 1 where V > 0, i.e. where z > 0. In other words, taking a t z shell that intersects the AH at the fast pole, the light rays move fastest between the shells exactly where the shell is just emerging from the AH.

19.7.7 Szekeres wormholes and their properties Properties of wormholes (necks) in the quasi-spherical Szekeres spacetimes were discussed by Hellaby and Krasi´nski (2002). However, that discussion requires complicated calculations, so we refer the reader there for details. Here, only the results are briefly reported. Since the Szekeres spacetime is not spherically symmetric, its wormhole is in general ‘bent’ – it is shorter along one side and longer along the opposite side. This raises two questions: 1. Can the wormhole be bent so strongly that the regions on its opposite ends are matched together, thus forming a single space, with the wormhole being a handle on it, as in Fig. 19.4? 2. With one side of the wormhole being shorter, can one send a light ray through the wormhole to the region outside the apparent horizons? Unfortunately, both answers are ‘no’. The matching hypersurface would have to coincide with a shell crossing, or else t = 0. The paper by Hellaby and Krasi´nski (2002) also contains numerical examples of light rays propagating through the wormhole.

19.7 Properties of the quasi-spherical Szekeres solutions

419

longer

shorter

Fig. 19.4. A conceptual illustration of joining a Szekeres wormhole model to itself, to form a handle on a 3-space. The matching surface (an intersection of the matching hypersurface with the space of the figure) would run between the ends of the tube shown. (Figure provided by C. Hellaby.)

19.7.8 The mass-dipole In the z = 0 Szekeres solution, the distribution of mass over each single sphere t = constant z = constant has the form of a mass-dipole superposed with a monopole. This was first noted by Szekeres (1975b) and then explained in much more detail by de Souza (1985). The presentation here is based on the latter reference, but somewhat modified. The basic idea is to separate the expression for matter density, (19.171), into a spherically symmetric part s , depending only on t and z, and a nonsymmetric . Without additional requirements, this can be done in an infinite number of ways. Add and subtract Ht z/2 on the right-hand side of (19.171), where Ht z is an arbitrary function. The result is  = s t z + t z x y

(19.256)

where: s =

H  2

 =

2Mz −Hz  − z 6M − H

2 z −z 

(19.257)

Now additional requirements on H will make the splitting unique. Transform x y to spherical polar coordinates on a sphere of radius 1 that is tangent to the x y plane at the point x y = 0 0. The transformation is as in (19.153), but with S = 1 and P = Q = 0, thus x = cot/2 cos 

y = cot/2 sin

(19.258)

This transforms  = e− , as given by (19.150), to  = A cot2 /2 + 2B1 cot/2 cos + 2B2 cot/2 sin + C

(19.259)

We substitute this in (19.257) and consider the equation  = 0. We embed the sphere in a Euclidean 3-space, and express   through the Cartesian coordinates in the space X = sin  cos 

Y = sin  sin 

Z = cos 

(19.260)

420

Relativistic cosmology IV

Using (19.259) and (19.260) in  = 0 we obtain   Az 1 + Z + 2B1z X + 2B2z Y + Cz 1 − Z 6M − H = A1 + Z + 2B1 X + 2B2 Y + C1 − Z 2Mz −Hz 

(19.261)

Now we require that the surface of  = 0 passes through the centre of the sphere, i.e. that Eq. (19.261) is fulfilled at X = Y = Z = 0, thus A + C 2Mz −Hz  = Az +Cz  6M − H

(19.262)

Since A C M  depend only on t and z, this can be solved for H: H=

2Mz A + C − 6MA + Cz

z A + C − A + Cz

(19.263)

This solution makes sense except when A + C/z ≡ 0. But then, the Szekeres model would degenerate into the Friedmann model. Hence, (19.263) applies whenever the Szekeres model is inhomogeneous. With H given by (19.263), Eqs. (19.257) become: s =  =

2Mz A + C − 6MA + Cz   2 z A + C − A + Cz

(19.264)

Az + Cz −A + Cz / 6Mz − 2Mz   (19.265) × 2 2  z −z /  z A + C −  Az + Cz 

Now,  = 0 has two solutions: Az + Cz −A + Cz / = 0

(19.266)

and 2M/3 z = 0. The second one defines a hypersurface that depends on t, that is, it is not comoving except when 2M/3 z ≡ 0, but then the matter-density becomes spatially homogeneous. The first hypersurface, call it H1 , has its equation independent of t – it is a world-sheet of a comoving surface. Moreover,  changes sign when H1 is crossed, and, in the variables X Y Z,  is antisymmetric with respect to H1 . Hence,  is a dipole-like contribution to matter density. Although the separation (19.256) is global, the orientation of the dipole axis is different on every sphere t = constant r = constant. We will now verify that H1 intersects every t = constant z = constant sphere along a circle, unless Pz = Qz = Sz = 0 (= Az = Cz ), in which case the dipole component of density is simply zero. The intersection of H1 with any sphere of constant z is a circle parallel to the great circle z = 0, as noted after Eq. (19.189). It will coincide with the z = 0 circle at those points where Az + Cz = 0 (if they exist). The dipole-like component will be antisymmetric with respect to z / only at those values of z where A + C = 0 = Az + Cz z , but such values may exist only at the centre,  = 0, because A + C = 0 contradicts Eq. (19.147) with k > 0. The solution of (19.266) will exist when     z z A + Cz ≤ ≤ z

(19.267)  min A+C  max

19.8 * The Goode–Wainwright representation

Since z /min = −z /max , Eq. (19.267) is equivalent to   Az + Cz 2 z 2 Pz 2 + Qz 2 + Sz 2 ≤ =

A + C2  extreme S2 We have

  A + C = 1 + P 2 + Q2 + S 2 /2S   Sz S 2 − P 2 − Q2 − 1 PPz + QQz +

Az + Cz = 2S 2 S

421

(19.268)

(19.269)

Substituted in (19.268), this leads to   4S 2 Sz 2 1 + P 2 + Q2 − 4S 2 PPz + QQz 2   − 4SSz PPz + QQz  S 2 − P 2 − Q2 − 1    + Pz 2 + Qz 2 1 + P 2 + Q2 + S 2 ≥ 0

(19.270)

The discriminant of this with respect to Sz is   2   = −16S 2 1 + P 2 + Q2 + S 2 PQz − QPz 2 + Pz 2 + Qz 2 

(19.271)

and is negative unless Pz = Qz = 0. Thus, with Pz  Qz  = 0 0, the left-hand side of (19.270) is strictly positive. Even when Pz = Qz = 0, it is still strictly positive unless Sz = 0. However, Pz = Qz = Sz = 0 implies Az = Cz = 0 and z = 0 on the whole sphere, and then  = 0; i.e. on such a sphere the density is spherically symmetric. Hence, apart from the spherically symmetric subcase, Eq. (19.267) is fulfilled, with sharp inequalities in both places. This means that the  = 0 hypersurface intersects every t = constant r = constant sphere along a circle parallel to the z = 0 circle (see the remark after Eq. (19.189)).

19.8 * The Goode–Wainwright representation of the Szekeres solutions Goode and Wainwright (1982) introduced a description of the Szekeres solutions in which many properties of the two subfamilies can be considered at one go.1 The metric is     ds2 = dt2 − S 2 e2 dx2 + dy2 + H 2 W 2 dz2  (19.272) where St z is defined by St 2 = −k + 2/S

(19.273)

k = 0 ±1, and z is an arbitrary function, H = Ax y z − + f+ − − f−  1

(19.274)

The G–W notation became a standard that is partly in conflict with the notation widely used for the L–T models. It is used only in this section.

422

Relativistic cosmology IV

A, e and W will be defined below (they differ for each subfamily), + z and − z are functions of z defined below, and f+ t z and f− t z are the two linearly independent solutions of the equation Ftt + 2St /SFt − 3/S 3 F = 0

(19.275)

Those solutions of (19.273) for which St > 0 are S = g$ $

t − Tz = g$

(19.276)

where Tz is an arbitrary function (the bang time) and g$ is ⎧ ⎪ when k = +1 ⎪ ⎨$ − sin $ g$ = sinh $ − $ when k = −1 ⎪ ⎪ ⎩$3 /6 when k = 0

(19.277)

With k = 0, S can be rescaled so that  = constant (see later), and this choice of S will be assumed. The corresponding solutions of (19.275) are ⎧ ⎪ ⎪6/S 1 − $/2 cot$/2 − 1 when k = +1 ⎨ (19.278) f+ = 6/S 1 − $/2 coth$/2 + 1 when k = −1 ⎪ ⎪ ⎩$2 /10 when k = 0

f− =

⎧ ⎪ ⎪ ⎨6/S cot$/2

when k = +1

6/S coth$/2 when k = −1 ⎪ ⎪ ⎩24/$3 when k = 0

(19.279)

The coefficients in f± were chosen for later convenience. The solutions with St < 0 are time reverses of (19.278)–(19.279), and  > 0 is assumed for correspondence of the results with the Friedmann models. With these assumptions, f+ are the solutions that increase with time and f− are the solutions that decrease with time. The two subfamilies are now defined as follows: z = 0 Tz 2 + z 2 = 0, so Sz = 0, and then e =

fz az x2 + y2  + 2bzx + 2czy + dz



(19.280)

where fz is arbitrary and a b c d are functions of z subject to: ad − b2 − c2 = /4

 = 0 ±1

(19.281)

W 2 =  − kf 2 −1  + = − kf z /3 A = fz − k+ 

(19.282) − = fTz /6

(19.283) (19.284)

19.8 * The Goode–Wainwright representation

423

and it is understood that z = 0 when k = 0 (see later). z = 0 z = Tz = 0, so Sz = 0, and:  1  e− = 1 + k x2 + y2  W = 1 4 ⎧     ⎪ e az 1 − 41 k x2 + y2 ⎪ ⎪ ⎪ ⎨ + bzx + czy − k for k = ±1 + A= ⎪ az + bzx + czy ⎪ ⎪ ⎪   ⎩ − 21 + x2 + y2 for k = 0

(19.285)

(19.286)

a, b, c, + and − being arbitrary functions of z. The remarkable thing about the Goode–Wainwright (G–W) parametrisation is that Eqs. (19.272)–(19.279) all hold for both subfamilies, the z = 0 subfamily differing from the other one only by  and T being both constant. In both subfamilies the subcase + = − = 0 gives the Friedmann models, but represented in a rarely used coordinate system. That this subcase is indeed a coordinate transform of the Friedmann models can be seen by applying the criteria of Section 17.12. In the z = 0 subfamily, the G–W representation arises as follows. Define 'z by kz = K'2 z

(19.287)

where kz is the function from (19.144), and K = 0 ±1. When k = 0, ' = k 1/2 ; when k = 0, Eq. (19.287) does not define 'z, and in this case we take 'z to be a new arbitrary function. Then define St z by  = 'S

(19.288)

so that S obeys 2

Stt St 2 K + 2 + 2 = 0 S S S

(19.289)

resulting from (19.146) with (19.287), (19.288) and p = 0. Equation (19.273) is the integral of (19.289). Equation (19.147) now becomes   1 1 2 AC − B1 2 − B2 2 =

(19.290) + K' 4 h2 z Let us define Gz by 1/h2 z + K'2 = G2  (19.291)   1/2 where  = 0 ±1 so that G = 1/h2 + K'2  when 1/h2 + K'2 = 0 and 0 = Gz is an arbitrary function otherwise. Then let us define a, b, c, d, f and W by A B1  B2  C ' = a b c d f G

h = W/G

(19.292)

424

Relativistic cosmology IV

the functions a, b, c, d will then obey (19.281). In the new variables, from (19.142), (19.145) and (19.288), we obtain e = Se , where  is the  given by (19.280) (not equal to the one from (19.145)), and from (19.150), (19.288) and (19.291)–(19.292) we obtain e = WS fSz /S + fz 

(19.293)

and so H = fSz /S + fz . When k = 0 the function 'z (and with it fz) is not yet defined. In this case, let us define ' by ' = M 1/3 

(19.294)

where M is the function from (19.161). Then, S as defined by (19.288) will obey (19.273) with k = 0 and  = 1, all other equations (19.272)–(19.284) remaining unchanged. Hence, when k = 0 one can assume  = constant, and we will assume it in this section. Now it can be verified, case by case from (19.277)–(19.279), (19.283), (19.284) and (19.294), that def

F = + f+ + − f− = A − H = −fSz /S − k+

(19.295)

obeys (19.275). Note that with k = 0 necessarily + = 0. In the case under consideration, the formula for matter density (19.162) becomes  = 61 + F/H/S 3 ≡ 6S 3 H/A

(19.296)

In the z = 0 subfamily, the constant k can be rescaled to +1 or −1 when k = 0 by simple rescalings of x, y, ', U and W . We will therefore assume that k = 0 ±1. The G–W representation is then introduced in a different way when k = ±1 and when k = 0. When k = ±1 we can redefine U , W and  by U = u − kw/2

W = ku + w/2

 =  − ku

(19.297)

and then   obeys (19.135) with p = 0 and U + kW = 0. This can be assumed with no loss of generality – see the comments after (19.140). The G–W representation then arises by  = S W = a/2

e = Se  U = −ka/2 def

e = A + k+ S +  = HS

V1 = b

V2 = c

(19.298)

+ = −kXz/3M

where e and A are given by (19.285)–(19.286) and Xz is the function from (19.158). Hence F = A − H = −/S − k+ 

(19.299)

19.8 * The Goode–Wainwright representation

425

and it can be verified, case by case again, with the help of (19.159), that F obeys (19.275) and F = + f+ + − f− , where f+ and f− are given by (19.278)–(19.279) and − z is an arbitrary function. When k = 0 the procedure is different. We first observe that when  = k = 0, the function Xz in (19.158) can be assumed zero with no loss of generality because X = 0 results after the reparametrisation  =   + X/3, W = w − X/6 (then e =   + , as   before). Then, we take  = S = e and e =  + S, where  is given by (19.134) and S is given by (19.276)–(19.277). Next, we find  from (19.159) in the case k =  = 0. Finally, we define def

F = − /S = + f+ + − f− + A

(19.300)

where + = −U , b = V1 , c = V2 , a = 2W and − z is arbitrary. The functions f+ and f− are as in (19.278)–(19.279), while A is as in (19.286). Using the information given in this paragraph, one can verify that such an F obeys (19.275). The matter-density is given by (19.296) for the z = 0 subfamily as well. As Goode and Wainwright observed, Eq. (19.275) is linear and has the same form as the equation derived for the density perturbation in the linearised perturbation scheme around the Friedmann background, if the perturbed solution is also dust. This holds both in relativity and in Newtonian theory; see Eqs. (15.9.23) and (15.10.57) in the Weinberg (1972) textbook and Eqs. (12.10) and (12.31) in the textbook by Raychaudhuri (1979). However, this is only a formal similarity. The following differences should be noted: 1. In the corresponding equation of the linearised perturbation scheme, the coefficients 2St /S and 3/S 3 = /2 are taken from the background Friedmann model, whereas here they come from the perturbed model. Assuming F small, this means, not surprisingly, that the equation of the linearised perturbation is the linear approximation to (19.275). 2. In the linearised perturbation scheme, the solution of (19.275) is = p − b /b , where p is the perturbed density and b is the Friedmann background density. In the Szekeres models, assuming F small and linearising about the background, one obtains F = Ap − b /b , that is, F  only if A  1, which is a limitation imposed on the model. Otherwise, F has no clear physical meaning, although it does define a certain deformation on the Friedmann background. 3. In the linearised perturbation scheme, every solution of (19.275) generates a perturbed model. In the Szekeres models of the z = 0 subfamily the coefficients + and − are provided by other field equations (see (19.283)), and when k = 0 the growing mode is necessarily absent + ≡ 0. In the z = 0 subfamily with k = 0 the coefficients are truly arbitrary, but with k = 0 the + is again provided from elsewhere. Still, the G–W representation is enlightening in several ways. From Eq. (19.283) one can see that the growing mode of perturbation is generated by the spatial inhomogeneity

426

Relativistic cosmology IV

in the mass distribution z = 0, and the decaying mode is generated by the nonsimultaneity of the Big Bang Tz = 0 – a result that required much labour to obtain in the standard representation of the L–T model; see Section 18.19. The expansion and shear of the dust source are in both cases: ( = 3St /S − F/H

211 = 222 = −33 = 2F/3H

(19.301)

From the above and from (19.278)–(19.279) one can now show that (19.275) is the Raychaudhuri equation (15.43), which, surprisingly, becomes linear for the Szekeres models in the G–W representation. In general, there can be two scalar polynomial curvature singularities; they occur where S = 0 and H = 0 The first is the Big Bang. It is pointlike when − = 0 or cigar-type when − = 0. In the z = 0 subfamily, − = 0 implies a simultaneous Big Bang; in the z = 0 subfamily the Big Bang is always simultaneous. The second singularity is the shell crossing. When z0  > 0, the shell crossing along the flow lines with z = z0 will occur later than the Big Bang, so it is astrophysically relevant. Whenever it occurs, it is of the pancake type. The book by Krasi´nski (1997) contains a list of other papers in which the G–W representation was used.

19.9 Selected interesting subcases of the Szekeres–Szafron family 19.9.1 The Szafron–Wainwright model Szafron and Wainwright (1977) considered the subcase of the Szafron  = 0 class in which k = 0 = W and p = /t 2 ,  = constant. Then (19.138) is fulfilled by t = Qt2/3 , where Q obeys   4Qtt /3 + /t2 Q = 0 (19.302) and (19.135) reduces to     4/3%tt + /t2 % = 4Uz/ 3Q1/3 

(19.303)

def

where % = Q1/3 . Note that (19.302) is the homogeneous part of (19.303). The general solution of (19.302) is Qt = C1 t1−q + C2 tq 

(19.304)

where C1 and C2 are arbitrary constants and  = 4/3q1 − q; q will be real only when  ≤ 1/3. With  = 1/3, the two basis solutions in (19.304) become linearly dependent, and there exists an additional solution. With q complex, the constants C1 and C2 must be complex, too, and the real solutions for Q have different properties than those with real q. All these cases have to be considered separately. Szafron and Wainwright considered only the case  < 1/3 (q = 1/2 and real).

19.9 Selected interesting subcases

427

A. The case  < 1/3 With reference to (19.137), the solution is t = Qt2/3  t z = %/Qt1/3 

Qt = C1 t1−q + C2 tq  % = 1 t1−q + 2 tq 

Uz  tq dt 1 − 2q Q1/3 Uz  t1−q dt 2 = Az − 1 − 2q Q1/3 1 = Bz +

(19.305)

where Az and Bz are arbitrary functions. This model begins with a (simultaneous) Big Bang at t = 0 and then expands forever. It reduces to a k = 0 Robertson–Walker metric when U = V1 = V2 = 0, B = C1 and A = C2 , but the equation of state in the limit is none of the astrophysicists’ favourites. The density in the R–W limit is  = 4/3Qt /Q2 , with Q the same as in (19.304). B. The case  = 1/3 q = 1/2 Only the expressions for Q and % are different from the previous case:   √t  ln t √t  √ √ dt − dt  % = Az ln t t + Bz t + Uz ln t Q1/3 Q1/3 √ √ (19.306) Qt = C1 t + C2 t ln t

The evolution of this model is qualitatively similar to the previous one: a simultaneous Big Bang followed by expansion forever. The R–W limit results in the same way as before. C. The case  > 1/3 In this case, q is complex: q± = 1/2 ± iq2 

q2 =

√

3 − 1/2

(note that q− = 1 − q+ ), and the solution is √ √ Qt = C1 t cosq2 ln t + C2 t sinq2 ln t √ √ % = Az t sinq2 ln t + Bz t cosq2 ln t √   √t cosq ln t Uz t 2 sinq2 ln t dt + Q1/3 q2  √t sinq ln t  2 dt

− cosq2 ln t Q1/3

(19.307)

(19.308)

The function  begins from zero value at t = tB , increases to a maximum and then decreases back to zero a finite time later. Unlike in typical R–W models, the duration

428

Relativistic cosmology IV 3 2.5 2 1.5 1 0.5 0

0

1

2

3

4

5

6

7

8

9

10

Fig. 19.5. A graph of the function t for a model of the Szafron–Wainwright class with  > 1/3. The graph is self-similar: it looks the same for every scale on the horizontal axis.

of the cycle increases with increasing t. The period between bang and crunch tends to zero as t → 0 and to infinity as t → , and the same is true for the maximal value of  in each cycle; see Fig. 19.5. The pressure p = /t2 acts like a cosmological constant decreasing with time, and is responsible for this behaviour, which persists also in the R–W limit (achieved in the same way as in Case A). The value of  is the radius of the cylindrical space t = constant. Along the generator of the cylinders, the variation of  with time is still more complicated. This model has never been investigated from the point of view of cosmology. The solutions described above have their exact counterparts in the z = 0 family. With p = /t 2 , the solution for  is of the same algebraic form, only its constants become arbitrary functions of z. The one corresponding to  < 1/3 was found by Szafron (1977); the other two have never been investigated.

19.9.2 The toroidal Universe of Senin Senin (1982) found a solution whose local geometry (not just topology!) is that of a 3-dimensional torus. We shall re-derive it here. The parametric equations of a 2-dimensional torus embedded in a Euclidean 3-space, with large radius b and small radius a (Fig. 19.6) are x = a cos ) + b cos 

y = a cos ) + b sin 

z = a sin )

b

a

Fig. 19.6. A 2-torus of large radius b and small radius a.

(19.309)

19.9 Selected interesting subcases

429

where is the azimuthal angle around the vertical axis in Fig. 19.6, while ) is the angle around the small circle; both angles vary in the range 0 2. We will make the torus 3-dimensional by allowing that the subset = constant is a sphere rather than a circle. The generalisation is straightforward, the appropriate parametric equations being: x = a cos ) + b cos  z = a sin ) sin *

y = a cos ) + b sin 

u = a sin ) cos *

(19.310)

the 3-torus being now embedded in a 4-dimensional Euclidean space with the metric dx2 + dy2 + dz2 + du2 . The metric of the 3-torus is   ds2 = a2 d) 2 + cos ) + b/a2 d 2 + sin2 ) d* 2

(19.311) In this 3-space, the surfaces * = constant are 2-dimensional tori, and the surfaces = constant have the local geometry of 2-spheres. Note, however, that, although on a surface = constant the coordinate ) plays the role of the lateral angle (normally denoted by ), it varies from 0 to 2, not from 0 to . Moreover, in the 3-space (19.311) the points with ) = )1 =  + )0  * = *0  are not equivalent to points with ) = )2 =  − )0  * =  + *0 , as they would be on a sphere, because the coefficient of d 2 does not return to its initial value after ) is increased by . We conclude from this that each surface = constant is actually a pair of spheres that touch each other at one pole, and their opposite poles are identified, as in Fig. 19.7. The next step is to make the 3-torus (19.311) a subspace t = constant of a 4-dimensional spacetime, and to allow the parameters of the torus to evolve with time. The simplest P

P

1

2

Fig. 19.7. The subspace = constant of the 3-torus with the metric (19.311). The two spheres are tangent at one pole; the poles P1 and P2 are identified. The coordinate ) has the value 0 at P1 ,  at the common point of the spheres and 2 at P2 ; it increases along the meridians of the spheres.

430

Relativistic cosmology IV

thing to do is to assume that the two radii a and b are momentary values of functions of time, so   ds2 = a2 t dt2 − d) 2 − sin2 ) d 2 − cos ) + bt/at2 d 2

(19.312) Somewhat miraculously, it turns out that the metric does contain perfect fluid solutions. The tetrad components of the Einstein tensor, in the orthonormal tetrad defined by (19.312), are G00 =

1 at 2 2 cos )at 2 2at bt 2 cos ) + + + 2 + 4 3 3 a aS aS aS a

G11 = G22 = G33 =

at 2 att cos ) att btt cos ) − 3 − − 2 −  a4 a a2 S aS aS

(19.313)

at 2 2att 1 − 3 − 2 a4 a a

def

where S = a cos ) + b. To allow a perfect fluid source, only one equation, G22 = G33 , must be imposed on the set (19.313), and it is equivalent to att /a = btt /b − 1

(19.314)

Hence, one of the radii of the torus can be chosen arbitrarily, while the other one will follow from (19.314). Since the metric depends on just two variables, t and ), the existence of a thermodynamical scheme is guaranteed (see Section 15.5). One sensible choice would then be to define an equation of state, which would provide a second equation connecting a and b, and then solve all equations. However, in testing a completely new class of models, Senin chose att = −a, and then it follows that a = a0 sin t

b = C1 t + C2 

(19.315)

a0 , C1 and C2 being arbitrary constants. This is a perfect fluid solution with u = 0 /a  =

p = a0 2 /a4 

2C1 cos t + 3a0 cos ) + C1 t + C2  / sin t a0 2 sin3 ta cos ) + b



(19.316)

When C1 = C2 = b = 0, the solution reduces to the k > 0 R–W model in the form (17.77)– (17.78) with the equation of state  = 3p. Each surface t = constant = constant has the local geometry of a torus with large radius b and small radius a; the two radii evolve according to different laws. The model has a finite duration. At t = 0, it has a Big-Bang singularity; the space t = constant begins its expansion from a ring of radius C2 . The large radius of the torus keeps growing from C2 to C1 + C2 ; the small radius grows from zero at t = 0 to the maximum a0 at t = /2, then collapses again to zero at the final singularity t = . The final singularity is again a ring, of radius 2C1 + C2 . With C2 = 0, the Big Bang is pointlike. The energy-density will be positive throughout the evolution when C2 = 0 if C1 /a0 is sufficiently large.

19.10 * The discarded case in (19.103)–(19.112)

431

In order to relate the Senin solution to the others, it is convenient to transform the coordinates as follows: t = arccos a0 − T  /a0   Then the metric becomes ds2 = dT 2 −

a2 T  1 + r 2 /42

) = 2 arctanr/2

(19.317)

2   1 − r 2 /4 1 + bT  d 2  dr 2 + r 2 d* 2 − aT  1 + r 2 /4 2



(19.318) a2 T  = a0 2 − a0 − T 2 

(19.319)

bT  = C1 arccos a0 − T  /a0  + C2  and is the following limit of the Szafron z = 0 class (19.137): k = 1

U = −1/2

V1 = V2 = 0

W = 1/2

(19.320)

19.10 * The discarded case in (19.103)–(19.112) In Section 19.5 we omitted the cases when tx = 0 or ty = 0 in (19.103)–(19.112). We show here that they contain no perfect fluid solutions. For clarity, we formulate the various statements as lemmas. Lemma 19.3 If z = 0 and tx = 0, and the metric (19.102) is to obey the Einstein equations with a perfect fluid source, then coordinates may be chosen so that z = 0. Proof: Rewrite Eqs. (19.105), (19.106) and (19.111) as follows: tx = − tx −t x + t x 

(19.321)

ty = − ty −t y + t y 

(19.322)

xy = − x y + x y + x y

(19.323)

Apply the integrability conditions txy − tyx = 0, txy − xyt = 0. The resulting equations are, respectively,

tyx − xyt = 0

x ty − y tx = 0

and

(19.324)

− txy = 2x ty − y tx + x ty 

(19.325)

− txy = 2y tx − y tx + x ty

(19.326)

Now differentiate (19.326) by z. Since z = 0, the result is yz tx = 0. Then, since tx = 0 by assumption, the implication is yz = 0

(19.327)

432

Relativistic cosmology IV

But from (19.324) with tx = 0 we have y = ty x /tx

(19.328)

Differentiating this by z and using z = 0 and (19.327) we obtain xz ty = 0. We thus have to consider two cases separately. Case 1: ty = 0. Then from (19.324) we have immediately y = 0, and from (19.325) y = 0. Substitute this in (19.110) and (19.112) and take the equation G22 − G33 = 0; the result is xx − x 2 − 2x x = 0

(19.329)

Differentiate this by t and use (19.321) to eliminate tx and txx . The result is − txx −2x tx + 2x tx = 0

(19.330)

Differentiate this by z. Since tx = 0, the conclusion xz = 0 follows anyway. Thus we go back to consider Case 2: xz = 0. Equations (19.327) and the above imply that  = 1 t x y + 2 t z

(19.331)

Substitute this in (19.321) and differentiate the result by z. The resulting equation is 1x 2tz = 0. But with 1x = 0 we would have x = 0, and then tx = 0 from (19.321) – contrary to the assumption. Hence, 2tz = 0, which means that 2 = 3 t + 4 z. Then, the coordinate transformation z = e4 dz will make the metric independent of z. Lemma 19.4 If z = 0 and tx = 0, and the metric (19.102) is to obey the Einstein equations with a perfect fluid source, then coordinates may be chosen so that y = z = y = 0, i.e. so that the metric depends only on t and x. Proof: We have already proven that no generality is lost on assuming that z = 0. Substitute (19.328) in (19.322) and use (19.321) to eliminate tx . The result is x ty /tx t = 0. Since x = 0 would lead to tx = 0 (from (19.321)), this implies that ty /tx = fx y =⇒ y = fx yx 

(19.332)

where fx y is an arbitrary function independent of t. With z = z = 0, do the complex coordinate transformation in Eqs. (19.110)– (19.112): = x + iy

= x − iy

(19.333)

and consider the equations G22 − G33 − G23 = 0 and G22 − G33 + G23 = 0. They are  +  2 − 2  = 0

(19.334)

19.10 * The discarded case in (19.103)–(19.112)

433

and its complex conjugate. The solution of (19.334) is e−2  = ht 

(19.335)

where ht  is an arbitrary function, independent of . Since  and  are real functions, by taking the complex conjugate of (19.335) we obtain e−2  = ht 

(19.336)

which happens to be the general solution of the complex conjugate equation to (19.334). Note that h = 0, or else  becomes a function of t only, which leads to tx = 0 via (19.321) – contrary to the assumption. Now do the transformation (19.333) in (19.332) and calculate fx y =

 −   / −1 y ≡i ≡i

x  +   / +1

(19.337)

This shows that  / = h/h does not depend on t. Hence  ht  ht0   =  =  ht  ht0  

(19.338)

where t0 is some fixed instant. Now define the function g  by 1/ht0   = dg/d

(19.339)

Then Eq. (19.338) may be written as  dg/d

=  dg/d

(19.340)

Let us take g  and g  as the new variables. Then Eq. (19.340) is equivalent to /g = /g, whose solution is  = t g + g

(19.341)

Now use (19.339) in (19.335) and (19.336), obtaining  2  2 = e  g  e2 = e  g where the prime denotes the derivative with respect to g + g. Since independent variables, Eq. (19.342) implies that g = ±g = C = constant

(19.342) and

are

(19.343)

the constant being real in order that  given by (19.342) is real. We choose the sign + to avoid having g + g = 0. Equations (19.341), (19.343) and (19.342) then imply that  and  are functions of the one argument g + g = C + . Then choose def

g + g = x 

def

−ig − g = y

(19.344)

434

Relativistic cosmology IV

as the new coordinates. Clearly,  = t x  and  = t x , and, applying  2 the2 chain   2 of transformations x y →    → g g → x  y  to the metric e dx + dy , we obtain   e2 dx2 + dy2 = e2 d d = e−2 e2 z 2 dg dg  2 2 (19.345) = e2−2 z 2 dx + dy /4 where   =  −  + ln z − ln 2 depends only on t and x . Conclusion. If ty = 0 and z = 0, and the metric (19.102) is to obey the Einstein equations with a perfect fluid source, then coordinates may be chosen so that the metric depends only on t and y. Proof: The transformation x y = y  x  is an isometry of (19.102). The rest of the proof follows by interchanging x and y in the proof above. Since the cases tx = 0 and ty = 0 are thus equivalent, we will follow only the case tx = 0 =⇒  = t x,  = t x. Lemma 19.5 If the functions  and  in the metric (19.102) depend only on t and x, while tx = 0, then the metric does not obey the Einstein equations with a perfect fluid source. Proof: Substitute y = z = y = z = 0 in (19.103)–(19.112) and take the equation G22 − G33 = 0. It is xx + x 2 − 2x x = 0

(19.346)

e x = he2 =⇒ 2 =  + ln x − ln h

(19.347)

Its solution is

where ht is an arbitrary function. We assume h = 0, or else (19.321) would imply tx = 0. Use (19.347) to eliminate  from G02 = 0; the result is tx +

txx xx tx 1 h − + t x + t x = 0

2x 2x 2 2 2h

(19.348)

This is integrated with respect to x, yielding e t + ht /h = k1 t + k2 t

(19.349)

where k1 t and k2 t are arbitrary functions. Substituting (19.347) and (19.349) into the integrability condition e t  x = e x  t we obtain t = k1 e− /2 − ht /h

(19.350)

19.11 Exercises

435

Now take the equation G11 − G22 = 0, use (19.347), (19.349) and (19.350) to eliminate , t , tt , t and tt , and multiply the result by x , obtaining    1 − he xx −x x  + − k1t e− + k1t  + k2t e− 2  ht 1 2 −2 − −2 x = 0

− 2 k  + k2  e − k1 e + 2k1 k1  + k2  e h 1 2 (19.351) The integral of this is   1 h k1t e− − k1t  + k2t e− + 2 t k1  + k2  e− 2 h ht − 1 2 −2 + 2k1 e − k1 e − k1 k1  + k2  e−2 + !1 t = 0

h 4

he− x −

(19.352)

Substitute here for  from (19.347) and multiply the resulting equation by e2 x . This can be integrated with respect to x again; the result is   1 h 1  he x + k1t e − k1t  + k2t e + 2 t k1  + k2  e 2 2 h   1 1 1 − k1 2  − k1 k 2 + k2  + !1 te2 + !2 t = 0

4 2 1 2

(19.353)

On this equation, the following sequence of operations should now be carried out: (1) replace e x from (19.347); (2) differentiate the result by t; (3) use (19.350) to eliminate t ; (4) use (19.349) to eliminate t ; (5) multiply (19.353) by k1 e− and subtract the product from the equation obtained in the previous step. The term containing  will cancel out, and what will remain will be a polynomial in , e− and e . Since x = 0 and the other functions do not depend on x, the coefficients of independent functions of  must vanish separately. The coefficient of 2 e− will vanish only when k1 = 0. However, then we have t = −ht /h in (19.350), which makes tx = 0, contrary to our assumption. Consequently, no perfect fluid solutions exist for (19.102) when  = t x,  = t x and tx = 0.

19.11 Exercises 1. Find the Killing vector fields for the transformation (19.1). Then solve the Killing equations for the components of the metric tensor in spacetime and verify that the solution is indeed given by (19.3).  2. Verify that −  /2 is the curvature tensor for the metric (19.5). 3. Find the Killing fields for the metric (19.5) and verify that they are given by (19.6). Then solve the Killing equations in four dimensions with the Killing fields (19.6) and verify that the resulting metric is (19.7).

436

Relativistic cosmology IV

4. Calculate the Riemann tensor for (19.9) and verify that it can vanish only with  = −1. Then, (19.9) is flat when dfr/dr = 1. 5. Find the Bianchi types for the algebras of Killing fields given by (8.41) and (19.6) and for the algebra defined by the transformations (19.1). 6. Verify that by equating the two expressions for G22 , Eqs. (19.25) and (19.29), we do indeed obtain (19.44). Hints are given in the text. 7. Show that the Datt–Ruban solution, given by (19.95) with Q = 0 and (19.99), can be matched to the Schwarzschild solution in the Lemaître–Novikov coordinates, (14.116)–(14.117). 8. Solve the equation of evolution of the Datt–Ruban model, (19.95), in the case Q =  = 0. Show that the model expands from a singularity  = 0 at t = tB to the maximal size  = 2M at t = tB + M, and then recollapses in a time-symmetric manner. 9. Show that the 2-dimensional metric (19.129) is a coordinate transform of the 2-dimensional metrics resulting from (19.11)–(19.12) when t = constant, r = constant, with k = √  and  = e . √ Hint. With k > 0, apply the transformation x = 2/ k cot/2√ cos , y = 2/ k cot/2 sin to (19.129). With k < 0, the transformation is x = 2/ −k coth/2 cos , y = √ 2/ −k coth/2 sin . 10. Prove that, in the most general case, the Szafron metrics given by (19.136)–(19.138) and (19.149)–(19.150) have no symmetry. Hint. Solve the Killing equations and verify that with no further limitations on the metric the solution is k ≡ 0. Note. this is a laborious exercise. You may use the paper by Bonnor, Sulaiman and Tomimura (1977) as an aid. 11. Consider a surface given by the equation r = a = constant in the coordinates r   related to the Cartesian coordinates x y z by x = r sinh  cos 

12. 13.

14. 15.

16.

y = r sinh  sin 

z = r coth 

(19.354)

in the pseudo-Euclidean flat 3-space with the metric ds2 = dx2 + dy2 − dz2 . Show that the surface obeys the equation of a two-sheeted hyperboloid z/a2 − x2 + y2 /a2 = 1 and that its internal metric coincides with that of the surface t = constant  = a in the metric (19.11) with f = sinh . Verify that the magnetic part of the Weyl tensor with respect to the velocity field in the Szafron spacetimes (19.150) and (19.137) is zero. Prove that (1) two eigenvalues of the 3-dimensional Ricci tensor, 3 AB , of the slices t = constant are equal (in both classes of Szafron’s spacetimes); (2) the eigenframe of this Ricci tensor coincides with that of shear; (3) the eigenspaces corresponding to the degenerate eigenvalues of shear and of 3 AB are the surfaces of constant curvature defined by the Szekeres geometry. Prove that the slices t = constant of the Szafron spacetimes are conformally flat, i.e. that their Cotton–York tensor (7.50) is zero. Verify that the barotropic equation of state  = p reduces the z = 0 Szafron spacetimes to the Robertson–Walker ones, and the z = 0 spacetimes to either R–W or Kantowski–Sachstype spacetimes, or the plane and hyperbolically symmetric counterparts of the latter. Note. this is a very laborious exercise. It is advisable to use the paper by Spero and Szafron (1978) as an aid. Calculate the integral in (19.159) when  = 0 and verify that along the z-direction the space has infinite extent at the instant of the Big Bang, then collapses to a minimum size, and expands to

19.11 Exercises

17. 18. 19. 20.

437

infinite extent as the final singularity is reached. Show that the maximum of expansion of the spheres and the minimum of collapse in the z-direction do not in general occur simultaneously. Verify Equation (19.163). Verify that the Szekeres solution with AC −B1 2 −B2 2 > 0 can be matched to the Schwarzschild solution. Verify that the metric (19.152) results from (19.150) after the reparametrisation indicated is carried out. Verify that the explicit solution for  that results from (19.169) in the limit k →  coincides with (19.101).

20 The Kerr solution

20.1 The Kerr–Schild metrics Most of the known solutions of Einstein’s equations resulted from a purposeful search related to the later application. The Kerr metric was discovered rather accidentally, in the course of formal mathematical investigations not obviously related to physics, and only afterwards was it found to describe the exterior gravitational field of a rotating body or black hole. Actually, no explicit solution of Einstein’s equations with a perfect fluid source has been found until today that could be matched to the Kerr metric. Its main application is to the description of rotating black holes, which earned it great importance in relativistic astrophysics. In the first two sections we shall briefly describe the way in which Kerr (1963) first chanced upon his solution. In the next sections, we shall introduce the quasi-derivation by Carter (1973), and will derive its most important properties. Sections 20.1 and 20.2 are based on the papers by Boyer and Lindquist (1967) and by Kerr and Schild (1965). The starting point is the consideration of metrics of the form g =  − l l 

(20.1)

where  is the flat (Minkowski) metric in any coordinates and l is a null vector field. The reasons given for studying this metric vary from paper to paper. Kerr and Schild (1965) justified it by saying that it allows for an easy conversion between covariant and contravariant components (see below). Boyer and Lindquist (1967) quoted another reason: the Schwarzschild solution has this form, which inspired the search for further metrics with the same property. The vector field l is required to be null with respect to the metric g , but then it follows that it is null with respect to  as well and that, consequently, it does not matter which metric is used to raise and lower the index of l. It follows also that the inverse metric has the form g  =  + l l 

(20.2)

Note that the sign of l l cannot be changed by coordinate transformations, so it is relevant. Depending on it, one or another coordinate will become time. For example, take coordinates in which the flat background metric is ⎡

⎤ 0 1 0 0 ⎢ 1 0 ⎥ 0 0 ⎥ ⎢ ⎣ 0 0 −1 0 ⎦ 0 0 0 −1

438

20.1 The Kerr–Schild metrics

439

and take l = 1 0 0 0. Consider both possible signs of l l in the metric, thus take l l with = ±1. The full metric, with coordinates u v y z, is then ds2 = 2 du dv + dv2 − dy2 − dz2  With = +1 we have ds2 = du + v2 − du2 − dy2 − dz2  whereas with = −1 we have ds2 = du2 − du − v2 − dy2 − dz2  To be consistent with the existing literature, we must take the sign as in (20.1) (note that we use a different signature from that in the papers cited).

Now consider the vacuum Einstein equations, R = 0, and take the component R l l = 0. The following formulae help in the calculation: 



 l l  

l l  





l  

l







= l l   

= l l   

=  

  1

= l − l l l   2    1

= l + l l l   2 

(20.3)

(20.4)





where  denotes the Christoffel symbols corresponding to the flat metric    (recall that   may be expressed in non-Lorentzian coordinates, so the Christoffel symbols do not have to be zero). The covariant derivatives in the formulae can be taken with respect to any of the two metrics, so for definiteness let us assume that they are with respect to   . Using these formulae, after a lot of algebra, we find that R l l = 0 implies ˙l ˙l = 0

(20.5)

˙l def = l  l  

(20.6)

where

In consequence of Eqs. (20.3)–(20.4), it does not matter which of the two metrics is used to calculate the covariant derivative in (20.6), both definitions of ˙l give the same result.

440

The Kerr solution

Now, in consequence of  l l = 0 we have  l ˙l = 0. Thus, ˙l is orthogonal to the null vector l and is itself null, by (20.5). One null vector can be orthogonal to another null vector only when they are collinear. Consequently l l  = l 

(20.7)

Thus, the vacuum Einstein equations imply that l must be tangent to geodesics, but the geodesics are not necessarily affinely parametrised. To obtain an affine parametrisation, we define √ def k = l / 2H (20.8) where the function H is defined by H l /2H = . Then k  k = 0

g =  − 2Hk k 

g  =  + 2Hk k 

(20.9)

In terms of k , Eqs. (20.3) do not change, whereas, in consequence of k being geodesic and affinely parametrised, Eqs. (20.4) simplify to  



k − k H k k  k =   (20.10)  



k = k + k H k k    In the next step, the following formula will be needed  



=  − k k H −Hk k − Hk  k − H k k   −Hk k  − Hk  k + 

H k k + 

Hk k +

Hk k  + 2Hk H k k k 

(20.11)

The covariant derivatives are with respect to   . Note that the difference of two Christoffel symbols is a tensor, as follows from (4.23). A direct calculation with use of Eqs. (20.3) rewritten in terms of k and of (20.10) gives for the Riemann tensor R   k k = H k k k k 

(20.12)

In vacuum, the Weyl tensor will obey the same equation. But then, it will obey also (11.55), and so we have derived the following Lemma 20.1 The vacuum Kerr–Schild metrics cannot be of the most general Petrov type, they are algebraically special, that is, of Petrov type II or simpler. The Kerr–Schild null geodesic vector field k is at the same time the degenerate Debever vector of the Weyl tensor.

20.2 The derivation of the Kerr solution by the original method

441

From the Goldberg–Sachs theorem 16.4 it follows then immediately that the field k is not only geodesic, but also shearfree.

20.2 The derivation of the Kerr solution by the original method The Kerr solution has no clear-cut invariant definition. Therefore, in order to understand how it came about, it is most instructive to follow the historical path. The presentation in this section is based on Kerr and Schild (1965). (Another derivation can be found in Debney, Kerr and Schild (1969), but in that paper a tetrad different from the one used here is employed and a different notation is used.) In the Minkowski space, let us choose the real null coordinates u v and the complex null coordinates  , related to the Cartesian orthogonal coordinates t x y z by √ u v   = t + x t − x y + iz y − iz/ 2 (20.13) In these coordinates, the Minkowski metric is ⎡

⎢ ⎢   =   = ⎢ ⎣



0 1 0 0

1 0 0 0 0 0 0 0 −1 0 −1 0

⎤ ⎥ ⎥ ⎥ ⎦

(20.14)

A general real null direction field in the Minkowski spacetime is in these coordinates given by k dx = du + Y Y dv + Y d + Y d ⇐⇒ k = Y Y  1 −Y −Y 

(20.15)

where Yu v   is an arbitrary complex function. If this field is to be geodesic, then the function Y must obey k Y = k Y  = 0

(20.16)

With (20.16) fulfilled, (20.15) is already affinely parametrised. Let us now consider a Kerr–Schild metric (20.9) with (20.14) as the background Minkowski metric and the geodesic field (20.15)–(20.16) as the field k . Let us introduce a double-null tetrad such as was defined in Section 16.5 for the metric (20.9), with e0 = k . The simplest choice of the other tetrad vectors is1 def

 = dv − Hk dx 

def

m = Y dv + d

def

m = Y dv + d

e1 =  =  0 + Hk  e2 = m = Y  0 −1 0 e3 = m = Y 0 0 −1 1

The tetrad (20.17) obeys the orthogonality relations (16.45) with respect to both g  and   .

(20.17)

442

The Kerr solution

Then, by virtue of (16.51), the field (20.15) will be shearfree if Y and Y obey in addition m Y  = m Y = 0

(20.18)

Z =  + i ≡  1 23 = m Y  

(20.19)

By (16.54) we also have

In what follows we will be assuming that  + i = 0. The tetrad (20.15)–(20.17) is not the special one we used in Section 16.6. Nevertheless, the equations1 R00 = R02 = R03 = R22 = R33 = 0 that were used in proving the Goldberg–Sachs theorem are now all fulfilled identically in consequence of the special form (20.17) and of the geodesic – shearfree properties (20.16) and (20.18). Some of the Ricci rotation coefficients vanish independently of the property  1 21 = 0; they are listed in the last line of (20.20). The other ones vanish in consequence of the form of the tetrad (20.15)–(20.17):  a b0 =  0 02 =  1 12 =  0 03 =  1 13 =  a 22 =  a 33 =  2 23 =  3 32 = 0  a 00 =  1 a0 =  1 22 =  1 33 = 0

(20.20)

Since we are working in coordinates in which the background metric is constant, the background Christoffel symbols vanish and the covariant derivatives in (20.11) become partial derivatives. Using (20.11) thus simplified, we find (the list does not include those s that are obtained by complex conjugation)  0 01 = − 1 11 = −k H 

 1 23 =  3 03 = Z

 0 21 =  3 11 = −m H −HY u   0 23 =  3 13 = HZ

 1 21 =  3 01 = Y u 

(20.21)

 2 21 = HZ − Z

Substituting all these in the equation 0 = R23 = R0 203 + R1 213 + R2 223 and using (9.21), (16.104) and (20.16)–(20.18) we find   2 (20.22) k H Z + Z + H Z2 + Z = 0 Since Z obeys the equation k Z = −Z2 (which follows from (16.84)), the above says that k H/Z + Z = 0, whose solution is H = e3P Z + Z

(20.23)

where P is a real function such that k P = 0.

1

In this section, the indices of the Riemann and Ricci tensors are tetrad indices, with the tetrad vectors being labelled as in Section 16.6: e0  e1  e2  e3  = k  m m.

20.2 The derivation of the Kerr solution by the original method

443

In consequence of (20.23), the equation R10 = 0 is fulfilled identically, while the equations R21 = 0 and R31 = 0 give Z Z m P = − Y u ≡ −  Y   Z Z

Z Z m P = − Yu ≡ −  Y  Z Z

(20.24)

These two equations imply the integrability condition m m P   −m m P   = −2 s 23 es P (see (16.104)). Explicitly, it reads def

S=

Z Z

2

Yu m Z −

Z Z Z m Yu − 2 Y u m Z + m Y u Z Z Z

 Z Z − Yu Y u − P Z − Z = 0 + Z Z 

(20.25)

The equation R11 = 0 is the most difficult to handle. The following identities are useful in calculating R11 ; they follow from the equations established so far, with use of the commutator formula (16.104): m Z = Z − ZY u 

(20.26)

 Z = Yu Y u −HZ2 + m Y u 

(20.27)

and their complex conjugates. Also, it is important to note that R11 = R2 121 + R3 131 ≡ −2R1213 = −2R0 213 . Although R11 must be real, the equation R1213 = R1312 does not hold identically (see the remark after Eq. (16.54)),1 so 2R1213 is not identically equal to R1213 + R1312 . Calculating R0 213 = 0 with use of (9.21) and (20.20)–(20.27) we find

 Z+Z Yu Y u + 3Z e3P m Yu Z e3P  Z + Z + 3H Z 2

2

Z Z Z −3 e3P m Y u + 3 2 e3P Y u m Z − 3 e3P Yu m Z = 0 Z Z Z

(20.28)

Taking the imaginary part of the above, we obtain Z + ZS = 0, where S is the expression defined in (20.25). Thus, the imaginary part of (20.28) vanishes by virtue of the integrability condition of (20.24). Using now (20.25) in (20.28) to eliminate the m Yu terms and recalling that Yu =  Y , we obtain the last equation of the Rij = 0 set:

  P = − 1/Z + 1/Z Yu Y u  (20.29) The functions Y and Y are independent, i.e. dY ∧ dY = 0 (because otherwise Z = 0; see Exercise 7). Each of P Y Y  obeys k  = 0

1

It holds by virtue of (20.25).

v  = 0

def

v =  −

 Y  Y  m − m  Z Z

(20.30)

444

The Kerr solution

where  stands for any of P Y Y . The vectors k and v are linearly independent. This means that the gradients of P, Y and Y are orthogonal to two linearly independent vectors, i.e. that they lie in the same 2-dimensional plane within the tangent vector space at each point of the manifold. Consequently, the gradients P , Y and Y  are linearly dependent, so there exists a functional relation of the form P Y Y  = 0, and hence P is a function of Y and Y . Then, Eqs. (20.24) become PY = −Y u /Z

PY = −Yu /Z

(20.31)

With this, and with P = PY Y , (20.29) is satisfied identically. Calculating the directional derivative of the first equation in (20.31) along m , and of the second equation along m , and using the commutator equation (16.104) to simplify the right-hand sides, we obtain ZPYY = ZPY 2 and ZPY Y = ZPY 2 , which is equivalent to



  e−P YY = 0 = e−P Y Y 

(20.32)

The solution of this is e−P = B + A1 Y + A2 Y + CY Y , where A1 , A2 , B and C are arbitrary def

constants. Since e−P must be real, it follows that B and C must be real, while A = A1 = A2 can be complex. Thus e−P = B + AY + AY + CY Y 

(20.33)

Each of the functions Y , Y  Z and Z satisfies the equation def

  = Bu + Cv + A +A = 0

(20.34)

where  is any of Y Y  Z Z. It follows that P and H obey the same equation, so  g  = 0 for the whole metric. The components of  are constant (in the coordinates currently used), so Eqs. (8.12) are satisfied. Consequently,  is a Killing field – simultaneously for the metric g  and for the flat background metric   . The coordinates u v   have not yet been defined uniquely – we are still free to transform them so as to preserve the form of the flat background metric (i.e. by the Lorentz transformations). Since  does not change under a Lorentz transformation, the equations k Y = g  k Y ≡  k Y = 0 = m Y = g  m Y ≡  m Y still hold in unchanged form after the transformation. Let us then assume that the Killing field 

is timelike with respect to  ,1 and let us carry out a Lorentz transformation after which  becomes collinear with the time axis of the background Minkowski space, thus A = 0

1

B = C > 0 =⇒  = B1 1 0 0

(20.35)

Kerr and Schild (1965) considered also the cases when  is spacelike or null; see also Debney, Kerr and Schild (1969).

20.2 The derivation of the Kerr solution by the original method

445

Then, Equations (20.16), (20.18) and (20.34) imply Y = YYu 

Y = Yv /Y

Yu +Yv = 0

(20.36)

Each of these is a quasi-linear partial differential equation of first order and can be solved by standard methods (Courant and Hilbert, 1965). The general solution of the whole set may be represented as def

FY   u − v = Y 2  −  + u − vY + Y = 0

(20.37)

where  is an arbitrary complex function of one variable. Calculating 0 = m F ≡ Y Fu −F we find Z = −1 + Y Y /FY

(20.38)

(where FY = 2Y  + u − v + Y ). Then, calculating 0 = Fu ≡ FY Yu + Y we find, with use of (20.31) and (20.38), Yu = −Y/FY = −ZPY = 1 + Y Y PY /FY  Hence PY = −Y/1 + Y Y , so e−P = constant × 1 + Y Y  and √ e3P = 2m/1 + Y Y 3 

(20.39)

(20.40)

where m is an arbitrary constant. Equations (20.9), (20.15), (20.23), (20.40), (20.37) and (20.38) implicitly define the most general vacuum Kerr–Schild metric in which the (necessarily existing) Killing field is timelike. The definition is implicit because Y has not been given as a function of the coordinates. In order to find it, we must specify the function Y in (20.37). It is here that we shall make an arbitrary non-covariant assumption, in order to find an explicit solution. We assume that Y is a polynomial of second degree of the form Y = Y 2 + Y − . We adapted the coordinates to the Killing field  , but we are still free to carry out transformations preserving the direction of  . These are the translations and rotations  in the 3-space orthogonal to  . By the translation  =  − we can then cancel the term Y 2 − in Y, and by one of the translations u√= u − Re  or v = v + √Re  we can cancel the real part of . Finally, we obtain  = 2iaY , where Im  = 2ia was assumed in this form for later convenience. With this , we transform back to the real coordinates t x y z by 1  = √ x + iy 2

1 u = √ t + z 2

1 v = √ t − z 2

(20.41)

and F becomes √ √ √ F = x − iyY 2 / 2 + 2z − iaY − x + iy/ 2

(20.42)

446

The Kerr solution

the function Yx y z being defined by F = 0. In order to simplify the final expression, we introduce the real function rx y z > 0 by1 x 2 + y 2 z2 + = 1 r 2 + a2 r 2

(20.43)

The solution of F = 0 is now2 Y=

r − zr + ia  rx − iy

(20.44)

Substituting this where necessary, we obtain √  2 2 r −z YY =  FY = r − iaz  r r +z √ 2 2  √ 2r r + iaz 2mr + z3 3P Z=− =   e r + z r 4 + a2 z2  8r 3 H =−

(20.45)

mrr + z2  2 r 4 + a2 z2 

and then substituting (20.41) in (20.15) we obtain in (20.9) ds2 = dt2 − dx2 − dy2 − dz2 −

 z 2mr 3 dt + dz r 4 + a2 z2 r

2

a r x dx + y dy + 2 x dy − y dx + 2 r + a2 r + a2



(20.46)

This is the form in which the Kerr metric first appeared in the literature,3 but Kerr (1963) did not give any hint on how it had been derived. Nothing in this derivation presaged the prominence that the result acquired later. The Kerr solution turned out to be extremely important from the point of view of physics. It is still the simplest exact solution of Einstein’s equations that describes the exterior field of a rotating body and the spacetime around a stationary rotating black hole. Because of this, it became a basis of hundreds of papers (if not more) discussing astrophysical aspects of black holes. Also, the Kerr solution is believed to be the universal asymptotic state towards which all nonstationary uncharged black holes should evolve. This last statement is based on the still unproven cosmic censorship conjecture (see Section 18.16), and we shall not consider the arguments in favour of it. 1 2

3

If x, y and z are interpreted as Cartesian coordinates, then the surfaces r = constant are confocal ellipsoids of revolution, with a being the radius of the focal ring and 2r being the smallest diameter of the ellipsoid. The other solution of F = 0 is obtained by the replacement r → −r. We discard it because we assumed r > 0. The value of r is the semiminor axis of the ellipsoid r = constant. The resulting metric can be extended to the region of negative values of r, but the extension involves nontrivial problems. We will discuss it in Section 20.8. Actually, the signature in Kerr’s paper was different from ours.

20.3 Basic properties

447

20.3 Basic properties The Kerr metric becomes the Minkowski metric when m = 0. Also, it becomes approximately flat when r becomes large – the Kerr–Schild term then becomes negligible compared with the Lorentzian part. Thus, at large values of r the metric (20.46) obeys the assumptions made in Section 12.18, where we discussed the weak-field limit of relativity. The component g00 = 1 −

2mr 3 r 4 + a2 z2

≈ 1−

2m 2ma2 z2 + + O1/r 5  r r5

(20.47)

when compared with (12.153), allows us to recognise m as the mass of the source. The g0I components, however, are not exactly of the form (12.154) because they contain terms of order 1/r, namely gtx = −

2mr 4 x − 2mar 3 y  r 2 + a2  r 4 + a2 z2 

gtz = −

2mr 2 z  r 4 + a2 z2

gty = −

2mr 4 y + 2mar 3 x  r 2 + a2  r 4 + a2 z2  (20.48)

The unwanted terms are 2mr 4 x and 2mr 4 y in gtx and gty , and the whole of gtz . We guess that the coordinates of (20.46) are not those that were used in deriving (12.153)–(12.155), so we need a transformation of the form (12.131) that would transform the metric as in (12.152). The simplest choice is to take bI = 0 and a time-independent b0 . The following b0 will do the job: b0x = −

2mr 4 x  r 2 + a2  r 4 + a2 z2 

b0z = −

2mr 2 z  r 4 + a2 z2

b0y = −

2mr 4 y  r 2 + a2  r 4 + a2 z2  (20.49)

The partial derivatives of b0 determined above identically obey the integrability conditions b0xy = b0yx and b0xz = b0zx (by virtue of (20.43)), so such a b0 does exist, and the transformed g0I are:  gtx =

2mar 3 y 2may + O1/r 3  ≈ 2 2 4 2 2 r + a  r + a z  r3

 gty = −

2mar 3 x 2max ≈ − 3 + O1/r 3  r 2 + a2  r 4 + a2 z2  r

(20.50)

 gtz = 0 These are exactly of the form (12.154), with the angular momentum P I = 0 0 −ma (where x1  x2  x3  = x y z). Thus the parameter a is the total angular momentum of

448

The Kerr solution

the source per unit mass. This much was said in the original paper of Kerr (1963), and the physical interpretation became immediately clear. The coordinates of (20.46), although convenient for interpreting the parameters, are not convenient in most other calculations because of the complicated form of the function rx y z. Often, it is more practical to use r as one of the coordinates. One such coordinate system was introduced by Kerr (1963). It is related to the coordinates of (20.46) by  x = r cos  + a sin  sin  ≡ r 2 + a2 sin  cos − arctana/r  y = r sin  − a cos  sin  ≡ r 2 + a2 sin  sin − arctana/r z = r cos 

(20.51)

where r ≥ 0,  ∈ 0  and  ∈ 0 2. The transformed metric is

 ds2 = dt2 − dr 2 − 2a sin2  dr d −  d 2 − r 2 + a2 sin2  d2 −

2 2mr

dt + dr + a sin2  d  

def

 = r 2 + a2 cos2 

(20.52)

In these coordinates, since the metric is independent of , it is seen that one more Killing vector field exists, in addition to the timelike Killing field k =  0 . It is k =  3 , 1

2

with x3 = . The group generated by k and k is Abelian, and it is a complete symmetry 1

2

group of the Kerr metric, as can be verified by solving the Killing equations. In the Minkowski limit m = 0, the coordinate  becomes the azimuthal angle, so we say that the Kerr metric is axially symmetric. Since the x y z coordinates of (20.46) become Cartesian rectangular at infinity, they can be imagined as ‘approximately Cartesian’ at finite distances. Then, as already stated, the surfaces of constant r are confocal ellipsoids of revolution whose foci lie on the ring z = 0 x2 + y2 = a2 . On this ring r = 0 and  = /2; it is a singularity of the coordinate system of (20.52), and, as we shall see below, a singularity of the spacetime as well. It is easily verified, using (20.51), that the following holds x2 + y 2 2

a2 sin 

−

z2 a2 cos2 

= 1

(20.53)

which shows that the surfaces  = constant are one-sheeted hyperboloids of revolution, with foci on the same ring. The hyperboloid corresponding to  = /2 is degenerated to the plane z = 0 with the ring r = 0 and its interior removed. Figure 20.1 shows the axial cross-section through the family of the r = constant and  = constant hypersurfaces. The geometry of the  = constant surfaces is more complicated. To see it, let us change the variables in (20.51) as follows:  = x cos  + y sin 

 = −x sin  + y cos 

(20.54)

20.3 Basic properties

449

Fig. 20.1. A cross-section through the space t = constant by a plane containing the axis of symmetry. The figure shows the surfaces of constant r (the ellipses) and the surfaces of constant  (the hyperbolae). The ellipsoids and the hyperboloids all have their foci on the ring of radius a, seen here as the thick horizontal line. The r   coordinates are singular on this ring; it has the equation r = 0,  = /2. When  → /2, the hyperboloid degenerates to the z = 0 plane with the disc r = 0 removed.

It follows then from (20.51) that  = r sin   = −a sin  ⇐⇒ a/2 − z/2 = 1

(20.55)

Since r ≥ 0 and  ∈ 0 , we have  ≥ 0 and  ≤ 0. The coordinates  and  are obtained by rotating the x- and y-axes by the angle . The surface (20.55) consists of two sheets that are mirror images of each other; the sheet corresponding to z ≥ 0 is shown in Fig. 20.2. Other  = constant surfaces are obtained by rotating the one in Fig. 20.2 around the z-axis. The surface contains the straight half-lines z =  cot   = constant along which it intersects the  = constant hyperboloids. A still more readable form of the Kerr metric results when the Boyer–Lindquist (1967) (B–L) coordinates are introduced. They are related to those of (20.52) by1 r = r t = t + 2m

 =   r dr !r r



 = − − a



dr  !r r

(20.56)

def

!r r = r 2 − 2mr − a2 

1

The  in (20.56) and the term with dt d in (20.57) have opposite signs to those implied by Boyer and Lindquist (1967). We have made the change in order to be consistent with the papers referred to in subsequent sections.

450

The Kerr solution

z

ξ

−η Fig. 20.2. A surface of constant  in the coordinates of (20.52). The tangent planes of this surface become vertical at the right edge and at z → . The distance from the z-axis to the right edge of the surface is a. The surface contains the straight half-lines z =  cot   ≥ 0 seen in the figure, they are intersections with the surfaces of constant . The figure shows only one half of this surface, for better clarity. The other half is the mirror reflection in the z = 0 plane; other surfaces of constant  are obtained by rotating this one around the z-axis. The -axis is drawn in reverse, so the actual coordinate on it is −. The circle is the singular ring r = a  = /2 .

The resulting metric, with primes dropped, is   2 2mr 4mra sin2  dt2 + dt d − dr −  d 2 ds = 1 −   !r   2mra2 sin2  2 2 + r + a sin2  d2  −  

2

The limit a = 0 of this is seen to be the Schwarzschild solution.

(20.57)

20.3 Basic properties

451

Since the B–L coordinates r   are orthogonal in the hypersurface t = constant, the surfaces  = constant can be imagined as planes orthogonal to the ellipsoids and to the hyperboloids. (In fact, they are only approximately planes – they are clearly nonflat.) The Schwarzschild metric has a spurious singularity at r = 2m, at which grr →  and g00 = 0. The coordinate t in the Schwarzschild metric (and also in the Kerr metric in the B–L coordinates) coincides with the proper time of an observer at infinity. In consequence of g00 = 0, the ratio of the proper time interval of the observer at rest in the set g00 = 0 to the corresponding proper time interval of infinity is zero, which means that the light emitted from g00 = 0 arrives to a distant observer with an infinite redshift. In the Kerr metric, the set grr =  is not the same as the set g00 = 0. The first one, given by r 2 − 2mr + a2 = 0, exists only when a2 ≤ m2 and will be seen later to be a spurious singularity, removable by a coordinate transformation. Actually, when a2 < m2 , the spurious singularity consists of two disjoint sets √ def r = r± = m ± m2 − a2  (20.58) The set r 2 − 2mr + a2 cos2  = 0 is sometimes called an infinite redshift hypersurface, by analogy with the Schwarzschild metric. However, as rightly pointed out by Carter (1973), this name is misleading. An observer at rest in the B–L coordinates has the coordinates r,  and  all constant. Now, on the hypersurface g00 = 0 and inside it (where g00 < 0), for such an ‘observer’ the interval ds2 ≤ 0, which means that he/she would have to be moving with the velocity of light or faster just to remain at rest. This means that the state of rest with respect to infinity is simply impossible where g00 ≤ 0 – stationary observers do not exist in that region. This is why this hypersurface has also a second, more appropriate name: the stationary limit hypersurface. It is seen from (20.57) that when a2 < m2 , r becomes time in those regions where !r < 0. Consequently, just as in the Schwarzschild solution, it is impossible to stay at constant r there. In those regions where !r > 0 and g00 ≤ 0, timelike vectors must necessarily have a nonzero -component. The minimal value of the -component is found from ds2 = 0 at dr = d = 0 using (20.57); it is:  2mra −  !r / sin   0 vmin = v  2mra2 sin2  +  r 2 + a2   → 0 as g00 → where v0 is the t-component of that vector. (Note that, as expected, vmin 2 2 0, i.e. as  → 2mr and !r → a sin .) This is an example of the phenomenon of frame dragging in the gravitational field of rotating bodies, which was mentioned in Section 12.18; see after Eq. (12.156). When  is near /2, while r is negative and r sufficiently small, the term 2mra2 sin2 / in the component g of (20.57) becomes negative and large in absolute value, which means that  becomes a timelike coordinate. Hence, the curves of constant t,  and r in that region are timelike. If we require that, by continuity, these lines are closed with period 2 also in that region, then closed timelike curves exist in the r < 0 sheet of the extended Kerr manifold. This applies to all three varieties of the Kerr

452

The Kerr solution

solution. This observation was reported by Boyer and Lindquist (1967), and attributed to a remark by Carter. The existence or nonexistence of regions with !r ≤ 0, their geometry and their relation to the regions with g00 ≤ 0 will be discussed in Section 20.5. Their physical meaning will emerge gradually later. The singularities of the Kerr metric are best recognised when, following Carter (1973), one calculates the tetrad components of the Riemann tensor in the orthonormal tetrad defined by    !r r

r 2 0 1 e = dr dt − a sin  d  e = r !r r (20.59) 

2 2  + a d a dt − r  e3 = sin  e2 = rd  r The tetrad components of the Riemann tensor are then R0101 = −R2323 = 2I1  R0123 = 2R0213 = −2R0312 = −2I2  R0202 = R0303 = −R1212 = −R1313 = −I1  r 2 − 3a2 cos2   I1 = mr 3

(20.60)

def

def

I2 = ma cos 

3r 2 − a2 cos2   3

The singularity is located on the ring r = a  = /2 , where  = 0. Since the interior of the ring is nonsingular, one can extend the metric through this set, to negative values of r. From (20.51) we see that the t x y z coordinates cover both sides of this surface sheet. With a2 ≤ m2 , the spurious singularities lie in the r > 0 region, so the extension through the interior of the singular ring does not simply result in another copy of the same set. We will come back to this in Section 20.8. Equations (20.60) imply that the Kerr metric is of Petrov type D.

20.4 * Derivation of the Kerr metric by Carter’s method – from the separability of the Klein–Gordon equation The Kerr metric emerged in Section 20.2 after imposing coordinate-dependent assumptions of unknown interpretation. It would be good to have an invariant definition that would single out the Kerr metric by a set of geometric properties. Such a definition is still lacking. Carter (1973) came one step closer to it by considering generalisations of the Schwarzschild metric in which the Klein–Gordon equation, in appropriately chosen coordinates, is still separable. Although this method is not unique and not invariant either, and makes ample use of the expected result, its bonus is that it allows one to generalise

20.4 * Derivation from separability

453

the Kerr metric for the cosmological constant and the electric/magnetic charge in a rather simple way. We will present this derivation now.1 The Klein–Gordon equation in curved space has the form   1 " √ √

 " − m0 2 −g = 0 −gg

  "x "x

(20.61)

where m0 is not to be confused with the mass parameter m of the Kerr metric. Equation (20.61) is called separable when the function  is a product of one-variable functions,   = i i xi . Such a form of  causes the left-hand side of (20.61) to become a sum of four ordinary differential equations, each involving just one coordinate. In considering the Klein–Gordon equation, it is convenient to use the metric co-form 

"/"s2 = g  "/"x  "/"x instead of the metric form. For the Schwarzschild solution, def

introducing the coordinate  = cos  (to simplify the determinant of the metric), the metric co-form is 

def

" "s

2

  2  

 " 2 " 1 1 2 = 2 − 1− − 2 r " 1 −  "  2   " Zr 2 " 2  − !r + "r !r "t

(20.62)

def

where !r = r 2 − 2mr and Zr = r 2 , these quantities being introduced for later convenience. The corresponding Klein–Gordon equation is      "2  1 "

1 r2 2 " 2 2 − 1− − − m0 r Zr  " "  1 − 2  "2   1 r 2 Zr " 2  1 " r 2 !r " = 0 + −  "r Zr "r  !r "t2

(20.63)

 The substitution  = i i xi  and multiplication by the appropriate functions allows one now to separate out the term that depends only on , then the term that depends only on , and then the terms depending only on r and t. Now we would like to generalise the co-form (20.62) so as to preserve the separability property, but allow the Kerr metric as a subcase. We thus keep the assumption that the metric functions are independent of t and . We also keep the property that the co-form is proportional to the sum of a term independent of r and a term independent of .

1

Carter (1968a) showed that the separability of the Klein–Gordon equation implies the separability of the Hamilton–Jacobi equation for the geodesics. We shall not quote the proof, since this implication will not be exploited here.

454

The Kerr solution

We must take into account that the Kerr metric is not diagonal and contains the gt terms. Consequently, we take as our first hypothesis   2   2  " " " 2 " 1 1 −! Z + Q = − "s Z " ! "t "    2  1 " " 2 " 1 +  (20.64) −!r Zr + Qr + Z "r !r "t " where ! , Z , Q , !r r, Zr r and Qr r are arbitrary functions, and Z will be determined later. The factors ! and !r could be made equal to 1 by coordinate transformations and renaming the other functions, but it is more convenient to keep them and make use of the freedom later in another way. The determinant of the metric is   √ (20.65) −g = Z2 /Zr Q − Z Qr   The Klein–Gordon equation in the metric determined by (20.64) is   √  √  √ −g " −g " −g 2 " " 1 − ! − !r − m0 Z  " Z " "r Z "r Z     √ 1 1 −g " " " " − Z + Q Z + Q  "t " ! Z "t "   √   " " " " 1 1 −g + Zr + Qr Zr + Qr = 0 (20.66)  "t " !r Z "t " √ The factor −g/Z present in each term may depend only on r and  in consequence of the assumed symmetry. But, to achieve separation, it must be a product of a function √ of r by a function of . Then, after dividing Eq. (20.66) by −g/Z, we can transform r = f1 r  ,  = f2  , and redefine ! , !r , Z , Q , Zr and Qr so as to achieve the result √ as if −g/Z = 1, which, by (20.65), means that we choose Z = Zr Q − Z Qr 

(20.67)

However, this is only a necessary, not yet a sufficient, condition for separability; the term that may still cause problems is the one containing m0 . It will allow separability if Z has the form Z = U  + Ur r, where U and Ur are functions of one variable, as yet undetermined. The derivative Zr must then vanish, which means, from (20.67) dZr dQ dZ dQr − = 0 dr d d dr

(20.68)

This can be satisfied in three ways: (1) at least one of Zr  Q  Z  Qr  is zero; (2) Zr and Z are constant; (3) Qr and Q are constant. We shall believe Carter (1973) that case (1) leads to subcases of (2) and (3). Cases (2) and (3) are clearly equivalent, so, for better correspondence with the Schwarzschild limit, we will take Qr = Cr = constant

Q = C = constant

(20.69)

20.4 * Derivation from separability

In this way, we have arrived at the following metric form: 2

!r C dt − Z d − ! Cr dt − Zr d2 2 ds = C Zr − Cr Z  

 dr 2 d2  − C Zr − Cr Z + !r !

455

(20.70)

Now we take into account the electromagnetic field. The Klein–Gordon equation with the electromagnetic 4-potential included is     " " 1 √ √

 − ieA

−gg − ieA − m0 2 −g = 0 (20.71)

  "x "x For simplicity, we assume that only the t- and -components of the 4-potential are nonzero, just as in the Schwarzschild case, and we assume the same symmetry as for the Kerr metric, so the nonzero components depend only on r and . Thus A dx = A0 r dt + A3 r d

(20.72)

Substituting this in (20.71), and taking into account the simplifications achieved in (20.70), we obtain       " " " " 1 2 − ! − !r − m0 Z  " " "r "r     1 " " " " 1 − Z Z + C + ieX + C + ieX   "t " ! "t "     1 1 " " " " + Zr Zr + Cr − ieXr + Cr − ieXr  = 0 (20.73)  "t " !r "t " where the following abbreviations were introduced: def

A0 Zr + A3 Cr = Xr 

def

A0 Z + A3 C = − X 

(20.74)

Equation (20.73) will be separable if X depends only on  and Xr depends only on r. Assuming this, the 4-potential is 

(20.75) ZA dx = Xr C dt − Z d + X Cr dt − Zr d  The constants C and Cr , if they are nonzero, can be rescaled by coordinate transformations of the form t = t ,  =  , accompanied by redefinitions of !r and ! , and by a similar rescaling of r. Both these constants could be rescaled to 1 in this way. However, in anticipation of the result we aim at, we rescale only C and rename Cr as follows: C = 1, Cr = a. We thus leave out the case C = 0. With this, we now proceed to the Einstein–Maxwell equations. We will include the cosmological constant and the electromagnetic field of an electric and a magnetic charge.

456

The Kerr solution

We will calculate the Einstein tensor using the following orthonormal tetrad of differential forms:   

! Z Z r e0 = e1 = dr e2 = d C dt − Z d  Z !r ! ! (20.76) e3 = ! /Z Cr dt − Zr d  Using (20.75)–(20.76) and (13.10) we find

 T00 = −T11 = T22 = T33 = F01 2 + F23 2 /2

(20.77)

where the Fij are the only two tetrad components of the electromagnetic field tensor that do not vanish:



 F01 = − Xrr Zr − aZ − Zrr Xr + aX /Z2  (20.78)



 F23 = X Zr − aZ + Z Xr + aX /Z2  For the Einstein tensor we find 1 a a2 3 G00 = − ! − 2 ! Z − 3 ! Z 2 + 3 !r Z 2 2Z 2Z 4Z 4Z a2 1 3 1 ! Zrr 2 − 2 !r Zrrr + 3 !r Zrr 2 − 2 !rr Zrr  3 4Z Z 4Z 2Z

 1 ! = !r ! aZrrr + Z  2Z2 −

G03

G11 =

(20.79) (20.80)

1 a a2 1 ! + 2 ! Z + 3 ! Z 2 − 3 !r Z 2 2Z 2Z 4Z 4Z +

G22 = − − G33 = −

a2 1 1 ! Z 2 − 3 !r Zrr 2 + 2 !rr Zrr  4Z3  rr 4Z 2Z

(20.81)

a2 1 a ! Z 2 + 3 !r Z 2 − 2 ! Z 4Z3   4Z 2Z a2 1 1 1 !rrr − 2 !rr Zrr + 3 !r Zrr 2  ! Zrr 2 + 3 4Z 2Z 2Z 4Z

(20.82)

a a 3a2 ! Z − ! Z − ! Z 2 Z2   2Z2   4Z3  

1 3a2 1 1 !r Z 2 − 3 ! Zrr 2 + ! Z ! − 3 4Z 4Z 2Z rrr 2Z2 rr rr 1 + 3 !r Zrr 2  (20.83) 4Z We are now going to solve the equations Gij + #gij = $Tij . The G03 equation is a sum of two terms, one of which depends only on  and the other only on r. The solution is easily found to be +

Zr = Cr 2 + C1 r + C2 

Z = −aC2 + C3  + C4 

(20.84)

20.4 * Derivation from separability

457

where the C and Ci are arbitrary constants. Substituting these in the equation G22 − G33 = 0 we obtain

 C4 = C2 /a − C1 2 + C3 2 /4aC (20.85) Substituting this in (20.84) we see that the transformation  =  + C3 /2aC and the redefinition C2 = aC2 + C1 2 /4C have the same result as if C3 = 0. Thus Zr = C r + C1 /2C2 + aC2 

Z = C2 − aC2 

(20.86)

The transformation t = t + C2  − aC does not change the combination Zr − aZ  and has the same result as if C2 = aC. Then, a translation of r makes C1 = 0, and the rescaling  =  /C ! = C!  !r = C!r has the same result as if C = 1. Thus finally, we have

 Z = a 1 − 2  (20.87) Zr = r 2 + a2 

√  We now solve the Maxwell equations. The equations F   = 0 = −gF 1  =

√  −gF 2  (coordinate indices) are already fulfilled. The ones that remain to be solved are

 Zr F01  r − Z F23  = 0 (20.88) aF01r − F23 = 0

(20.89)

the indices of Fij above being tetrad indices. The solution of (20.89) is Xr = Dr 4 + er − aD1 

X = −a3 D4 + q + D1 

(20.90)

where e and q are arbitrary constants. Equation (20.88) results in D = 0. The constant D1 does not enter the electromagnetic field tensor, and can thus be assumed zero with no loss of generality. The final solution of the Maxwell equations is then Xr = er, X = q. We now go back to the Einstein equations. The equation G00 −G22 = −2# is equivalent to a function of  being equal to a function of r, and thus being constant. Calling this constant E and integrating, we obtain 1 !r = #r 4 + Er 2 + 2mr + E2  3

1 ! = #a2 4 − E2 + E3  + E4  3

where m and Ei are arbitrary constants. The last equation to solve is



2 G22 − # = e2 + q 2 / r 2 + a2 2 

(20.91)

(20.92)

and it leads to E2 − a2 E4 = e2 + q 2 . With this, the Einstein–Maxwell equations are solved. However, a few conditions have to be imposed on the solution in order that the metric is physically reasonable. One of

458

The Kerr solution

them is E3 = 0 – otherwise there would be a term proportional to  = cos  in the metric and the field would not be mirror-symmetric with respect to the equatorial plane. To avoid a singularity at the axis  = 0, we require E = 1 + #a2 /3, and to obtain the correct Schwarzschild limit we require E4 = 1. Thus  

 1 ! = 1 − #a2 2 1 − 2  3 !r =

1 2 2 #r r + a2  + r 2 − 2mr + a2 + e2 + q 2  3

(20.93)

The final result for the metric is ds2 =

2

!r 2 d dt − a sin r 2 + a2 cos2 

  2

sin2  1 − 13 #a2 cos2  − a dt − r 2 + a2 d 2 2 2 r + a cos   

2  dr 2 d 2 2 2  − r + a cos  + !r 1 − 13 #a2 cos2 

(20.94)

This agrees with the result of Carter (1973) up to a constant factor in the first two terms1 that can be recovered by a simple rescaling of t and . A result equivalent to (20.94) under a coordinate transformation was obtained by Frolov (1974).2 It may be verified that the algebraic structure of the Weyl tensor for the metric (20.94) is still the same as in (20.60), so the generalised Kerr metric is still of Petrov type D. Comparing (20.94) with the spherically symmetric limit (a = 0, Section 14.4) and the proper Kerr limit (# = 0 = e = q, Eq. (20.57)) we recognise e and q as the electric and magnetic charges, respectively,3 and a as the angular momentum per unit mass (while, of course, m is the mass of the source and # is the cosmological constant). The farthest-reaching generalisation (so far) of the Kerr solution was obtained by Debever, Kamran and McLenaghan (1983, 1984). It contains 13 arbitrary constants, for most of which no physical or geometrical interpretation has been provided. Among them, in addition to the parameters contained in (20.94), it includes the acceleration of the source (Stephani et al., 2003). It is still of Petrov type D, and has the same Abelian symmetry group. The paper by Debever, Kamran and McLenaghan (1984) and the book by Stephani et al. (2003) contain lists of specialisations of this metric that recover the earlier-known solutions. Historically, the generalisation for electric charge was discovered by Newman et al. (1965) by a procedure equally mysterious as the derivation of the Kerr metric itself. They allowed the constants and coordinates in the Reissner–Nordström solution to be complex 1 2 3

Another difference is that Carter used the signature + + +−. We are grateful to Valeri Frolov for demonstrating the equivalence in a letter to A. K., long ago. As remarked in Section 14.4, the magnetic charge may be removed by a duality rotation, so the generalisation with respect to the case q = 0 is rather illusory.

20.5 Event horizons and stationary limit hypersurfaces

459

and applied such a complex coordinate transformation that the result of it was real – and was a generalisation of the Kerr metric for electric charge. The trick is known to work also in other cases, leading from given solutions of the Einstein or Einstein–Maxwell equations to other solutions, but nobody knows why it works, and why only in these particular cases – see Stephani et al. (2003) for more information. This metric (the limit # = 0 of (20.94)) is called the Kerr–Newman solution. The first author to generalise the Kerr metric for the cosmological constant was Carter (1968a); that paper in fact contains a 10-parameter electrovacuum solution and a list of possible specialisations of it.

20.5 The event horizons and the stationary limit hypersurfaces We come back now to the proper Kerr solution, with # = e = q = 0, and we will consider this case to the end of this chapter. We have already noted that the hypersurfaces given, in the B–L coordinates, by (20.58), if they exist, play a special role. We will call them event horizons – we will see later that they are indeed event horizons. We also noted that the stationary limit hypersurfaces, given by √ (20.95) r 2 − 2mr cos  + a2 cos2  = 0 =⇒ r = m ± m2 − a2 cos2  play a special role. We will now consider the shapes of these two families of hypersurfaces and their relation to each other. When a2 < m2 , there are two event horizons, the one at r = r− is contained inside the one at r = r√ + . There are also two stationary limit hypersurfaces in this case. The outer one, at r = m + m2 − a2 cos2 , envelops the outer event horizon, and is tangent √ to it only at the axis,  = 0 and  = . The inner stationary limit surface, at r = m − m2 − a2 cos2 , lies all within the inner event horizon and is tangent to it also only at the axis. It is tangent to the disk r = 0 at its singular edge. The geometry of these four hypersurfaces is shown in Fig. 20.3. As a → 0, the Kerr solution tends to the Schwarzschild solution. Then, the inner stationary limit surface and the inner event horizon both shrink to a point, together with the disc r = 0. The outer stationary limit surface and the outer event horizon coalesce and go over into the Schwarzschild horizon at r = 2m. As a → m, the two event horizons approach each other to meet at r = m when 2 a = m2 . The concave regions of the outer stationary limit surface shrink to points, and the surface becomes conical in their neighbourhoods, the vertices of the cones touching the event horizon. Similarly, the neighbourhoods of those points of the inner stationary limit surface that lie on the axis of symmetry become conical, the vertices being common with the outer surface. The geometry of these surfaces in the case a2 = m2 is shown in Fig. 20.4. When a2 > m2 , the event horizon disappears completely. This case, similarly to the previous one, has no Schwarzschild limit. The conical points of the stationary limit surface change to open holes, and the two stationary limit surfaces become parts of one surface

460

The Kerr solution

zo

r+ r–

zi

r=0

Fig. 20.3. An axial cross-section through the space t = constant in the Kerr metric, in the Boyer–Lindquist coordinates, in the case a2 < m2 . The surfaces r = r+ and r = r− are disjoint; the outer stationary limit surface (‘zo ’ in the figure) is tangent to r = r+ at the axis of symmetry. Likewise, the inner stationary limit surface (zi ) is tangent to r = r− at the axis. The disc r = 0 is seen as the horizontal line; the surface zi has a sharp edge, tangent to the disc. When a/m decreases, the surface r = r− approaches the disc r = 0, whereas the surface r = r+ recedes from the disc and becomes more spherical. When a → 0, the disc r = 0 and the surfaces zi and r = r− all collapse to a single point, while the surfaces zo and r = r+ coalesce at r = 2m and become spherical.

that has the topology of a torus. The hole in the surface around the axis of symmetry is the larger the greater the difference a2 − m2 . The surface still has an edge at r = 0, where it is tangent to the disc r = 0, but now the ‘outer’ and the ‘inner’ parts of it join smoothly at two rings, given by r = m  = arccosm/a and r = m  =  − arccosm/a. The geometry of this case is shown in Fig. 20.5. A comment must be added here. We have already alluded to the possibility of extending the Kerr spacetime to negative values of the Boyer–Lindquist r-coordinate (in the footnote to Eq. (20.44)), and such an extension will be discussed in Section 20.8. The following question then arises: where should the region with r < 0 be placed in Figs. 20.3–20.5? In the theory of analytic functions, one deals with the problem of multi-valued mappings by introducing Riemann surfaces: multi-sheeted manifolds such that to each value of a given function there corresponds only a single point of the Riemann surface (see, for example, Knopp (1996)). In our present case, one has to imagine that each of the planes of Figs. 20.3–20.5 branches out into two sheets at the disc r = 0. By going through the interior of the ring r = 0  = /2 from above, one does not reach the lower half of the figure, but a sheet with r < 0. There are in fact two such sheets. To enter the second one from the first, one has to go back up through the interior of the ring, go around the ring on the right or on the left, and then go through the disc r = 0 from below. Note that by going around the ring in this way one has to intersect the inner horizon r = r− (in Fig. 20.3) or the horizon r = m (in Fig. 20.4) twice, each time a different half of the horizon, and the two halves meet only at the ring singularity. This agrees with the picture of the maximally extended Kerr manifold shown in Fig. 20.14: there are two disjoint r < 0 sheets, and to proceed from one to the other one has to go through the r = r− horizon at least twice.

20.5 Event horizons and stationary limit hypersurfaces

461

r+ = r–

zo zi

r=0

Fig. 20.4. An axial cross-section through the space t = constant in the Kerr metric, in the Boyer–Lindquist coordinates, in the case a2 = m2 . There is now a single surface r = r+ = r− , the surfaces zo and zi both touch it at the axis (but are not tangent to it – they approach it at nonzero angle). As a → m, the concave areas on the zo surface from Fig. 20.3 shrink to points, and the neighbourhoods of those points become conical. The zi surface becomes conical at the axis as well.

Figure 20.6 shows the 3-dimensional subspace of the Kerr spacetime with a2 < m2 given by setting  = /2 in (20.57). The vertical axis in Fig. 20.6 is time. The top part of Fig. 20.6 shows a perspective view; the bottom part shows the view from above. The direction of rotation is clockwise a < 0, so that the X-axis in the top figure would move towards the viewer. The outermost ring is the stationary limit surface at r = 2m, the two middle rings are the event horizons r± and the innermost ring is the inner stationary limit surface that, because of  = /2, coincides with the ring singularity at r = 0. Several future light cones are shown. For r  2m they look like slightly deformed Minkowski light cones. At r = 2m, the light cone has one generator parallel to the t-axis: no timelike vector at that point can have a zero -component.1 As we move from r = 2m towards r = r+ , the cones lean forward further and become thinner in all directions. The limit r → r+ is discontinuous. As r → r+ from the r > r+ side, the cones tend to a single beam 1

Because of gt = 0, the time axis is not orthogonal to the t = constant hypersurface, but it is drawn as orthogonal for better readability.

462

The Kerr solution

zo zi

r=0

Fig. 20.5. An axial cross-section through the space t = constant in the Kerr metric, in the Boyer–Lindquist coordinates, in the case a2 > m2 . The spurious singularities have disappeared, and the two stationary limit surfaces have merged into one that has the topology of a torus. The points mark the places where zo (the surface with the plus sign in (20.95)) and zi meet; this happens at def

r = m  = 0 = arccosm/a and r = m  =  − 0 .

along the Y -direction in the T = 0 plane. As r → r+ from the r < r+ side, the cones tend  to the whole plane X = r+ 2 + a2 = constant (not shown in Fig. 20.6 for the sake of better clarity). With r > r+ , the intersections of the cones with a T = constant plane are ellipses that recede to Y → + as r → r+ . With r− < r < r+ , the intersections of the cones with the X = constant planes are ellipses elongated and rotated as shown in the inset; their axes both become infinite as r → r+ . A similar discontinuity exists at r = r− ; the intersections of the cones with a T = constant plane again become ellipses in the region r < r− .  Since at r = r+ the cone degenerates to the plane x = r+ 2 + a2 = constant, no timelike vector attached there can have a zero r-component; in fact r takes over as the time coordinate here. Inside r = r+ , it is impossible for an ingoing timelike or null curve to turn back without becoming spacelike along an arc or having a non-differentiable reflection. This shows that r = r+ is indeed an event horizon. In Fig. 20.6, ingoing and outgoing null curves cross at r = r+ , but the B–L coordinates give a false picture here. In reality, there are two event horizons at r = r+ . The Kruskal diagram (Fig. 14.6) gives a good picture of the situation, and we will deal with the corresponding extension for the Kerr manifold in Section 20.8. For r < r− , the cones become similar to those in the sector r+  2m. As

20.5 Event horizons and stationary limit hypersurfaces

463

Y T r = r–

r = r+ r = 2m

X

Y r=0

r = r–

r = r+

r = 2m

X

Fig. 20.6. A general perspective view (top graph) and a view along the time axis from above (bottom graph) of the Kerr subspace  = /2 in the coordinates of (20.57). Explanation is given in the text. Large dots mark the positions of the vertices of the cones in the T = 0 plane. The inset is an X = constant intersection of the light cone from the sector r ∈ r−  r+ .

464

The Kerr solution

r → 0, the cones squeeze to the straight line X = a T = Y . See the last exercise in this chapter for directions on how to draw this figure.

20.6 General geodesics The geodesic equations have a first integral corresponding to each existing Killing field. Let k be a Killing field, and let p be a vector field tangent to an affinely parametrised geodesic. Then, along the geodesic, dk p  /ds = D k p  /ds = k  p p + k p  p = 0, because k  = 0 and p  p = 0. Thus, since there are two Killing fields in the Kerr solution, k =  0 and k =  3 , there t



are two integrals of the geodesic equations; in the Boyer–Lindquist coordinates they are def

p k = p0 = E t

def

p k = p3 = − Lz  

(20.96)

In every geometry, there also exists the first integral that 

says that  the tangent vector to a geodesic has constant length, d g  p p /ds = D g  p p /ds = 0. The affine parameter s is determined up to a constant factor. We choose it so that for timelike geodesics g  p p = 0 2 = constant

(20.97)

where 0 is the mass of the orbiting particle. This parametrisation will allow an easy specialisation to null geodesics, for which 0 = 0. In fact, there exists a fourth first integral, discovered by Carter. We will follow Carter (1973) in introducing it. The geodesic equations are the Euler–Lagrange equations for the following Lagrangian: 1 dx dx def 1  = g  = g  x˙ x˙   2 ds ds 2

(20.98)

The momentum is then p = g  x˙  , and the geodesic equations can be derived by the Hamilton–Jacobi method, where the Hamiltonian is def

H = p x˙ −  = g  x˙ x˙  /2 = 

(20.99)

The following Lemma holds: Lemma 20.2 Let the Hamiltonian have the form H=

1 Hr + H  2 Ur + U

(20.100)

where H and U depend only on , while Hr and Ur depend only on r. (Note: the functions depend also on the components of momentum, which are variables independent of the coordinates.) Then Ur H − U Hr def K= − (20.101) Ur + U

20.6 General geodesics

465

commutes (in the sense of vanishing Poisson bracket) with the Hamiltonian, and thus is a constant of the motion. The proof follows by simple calculation. The Kerr Hamiltonian with # = 0 is

2 −! p 2 − ! −1 Z pt + C p

 H= 2 C Zr − Cr Z

2 −!r pr 2 + !r −1 Zr pt + Cr p

  + 2 C Zr − Cr Z

(20.102)

Substituting whatever necessary in (20.102) and (20.101), and using (20.52), we obtain for the fourth constant of the motion   2  2 !r

K = a2 sin2  r˙ − a sin2  ˙ − t˙ !r    2

2  



 sin 2 + r + a2 ˙ 2 +  (20.103) r 2 + a2 ˙ − at˙  The constants defined in (20.96) and (20.97) are r 2 − 2mr + a2 cos2  2mra sin2  t˙ +  ˙   "

2 # −!r a2 sin2  + r 2 + a2 sin2  2mra sin2  Lz = − t˙ +  ˙     2 2 

2 !

sin2  2 r˙ 2 2 ˙ + − 0 = − r + a2 ˙ − at˙ + r a sin2  ˙ − t˙  !r   E=

(20.104)

(20.105) (20.106)

These equations can now be solved for the velocities, which allows some general discussion. We introduce the following new functions:

 

2 def Rr = −K!r − 0 2 r 2 + a2 !r + r 2 + a2 E − aLz  (20.107) 2  L def % = K − 0 2 a2 sin2  − sin2  aE − 2z  (20.108) sin  The components of the velocity are then given by 2 r˙ 2 = Rr 2 ˙ 2 = %   a2 2mra 1 − Lz + E ˙ = 2 !r sin  !r 

 2 r 2 + a2 2mra 2 2 L + − a sin  E t˙ = − !r z !r

(20.109) (20.110) (20.111)

(20.112)

466

The Kerr solution

This still further. From (20.109) and (20.110) we see that  can be disentangled  ˙ / % = ˙r / Rr = 1. We take the quotient of these two equations to obtain (20.113), and their sum to obtain (20.114) below. In deriving (20.114) we substitute for  and group the terms so that each integrand depends on just one coordinate. The result is  dr  d (20.113) √ = √ = Q = constant R %  a2 cos2 d  r 2 dr + √  (20.114) & − &0 = √ R % where & is the affine parameter on the geodesic. The two equations above determine r& and & implicitly. In order to disentangle in a similar way, we note from (20.109)–  (20.111)–(20.112)  ˙ (20.110) that 1/ = / % = r˙ / Rr, and use one or the other of these equations to obtain an integrand that is a function of r only, or one that is a function of  only. The result is  2mraE − a2 L  Lz d z + dr (20.115)  − 0 = √ √ !r R sin2  %  a2 sin2 E  r 2 + a2 2 E − 2mraL z dr − d (20.116) t − t0 = √ √ !r R % In this form, the geodesic equations can be solved and investigated numerically. The equations of null geodesics follow as the subcase 0 = 0. Without numerical integration, only a few qualitative conclusions may be drawn. For example, if an orbit lies in the equatorial plane ( = /2 and ˙ = 0 on the whole orbit) or is tangent to that plane at one point ( = /2 and ˙ = 0 only at that point), then def

C = K + 0 2 a2 − aE − Lz 2 = 0

(20.117)

For the orbits that cross the equatorial plane at a nonzero angle, C > 0. (For the equations to be well defined, R and % must be non-negative.) For the orbits that never go through  = /2, C may be negative. For the orbits that run along the symmetry axis, Lz = 0. A detailed investigation of arbitrary timelike geodesics in the Kerr solution, and also in its generalisation for the cosmological constant, was published recently by Kraniotis (2004). The discussion includes physical effects, such as frame dragging, in the proper (# = 0) Kerr metric, and it has been announced that a similarly detailed discussion of the physical effects in the presence of # will be published in the future.

20.7 Geodesics in the equatorial plane This section is based on the papers by Bardeen (1973) and by Boyer and Lindquist (1967). In the spherically symmetric case each timelike or null geodesic lies in a plane, and then the coordinates are chosen so that it is the equatorial plane. In the Kerr spacetime,

20.7 Geodesics in the equatorial plane

467

which is mirror-symmetric with respect to the plane  = /2 (in the B–L coordinates), but not spherically symmetric, we do not have that freedom. The equatorial plane is  = /2, and a given geodesic either lies in it or does not. Equations (20.109)–(20.116) simplify a lot when it does, and we will consider this case now. Consider Eq. (20.109) in the case  = /2, ˙ = 0. The regions accessible for motion are determined by Rr ≥ 0. It is more convenient to treat Rr as a function of E. For motions in the equatorial plane, C = 0 in (20.117), which allows us to express K through the other constants. Substituting such K in (20.107) we obtain



1 Rr = r r 2 + a2 + 2ma2 E 2 − 4amLz E − r − 2mLz 2 − r!r 0 2  r The discriminant of this, with respect to E, is

$ 

%  = 4!r r 2 Lz 2 + 0 2 r r r 2 + a2 + 2ma2 

(20.118)

(20.119)

and for each r > 0 its sign is the same as the sign of !r . Hence, R has zeros only in those regions where !r ≥ 0. Before we conclude what this means, note that the component p0 of the tangent vector to the geodesic must be positive: since p0 ∝ dx0 /ds, the opposite would mean that we follow the motion backward in time. From (20.96) and (20.57) we find p0 = g 00 E + g 03 Lz = B E − Lz  / !r   where

2 def

B = r 2 + a2 − !r a2 sin2 

def

 = 2amr/B

(20.120)

(20.121)

Hence, p0 > 0 ⇐⇒ E > Lz , which, in the plane  = /2, reduces to E > 2amLz /D

 def

D = r r 2 + a2 + 2ma2 

The two roots of the equation Rr = 0 are   !

 1 2amLz ± !r r 2 Lz 2 + 0 2 rD  E± = D

(20.122)

(20.123)

We see that the root E− does not obey (20.122). Thus, the motion in the equatorial plane can occur only at values of E > E+ . Now consider the sign of !r . If a2 > m2 , then !r > 0 for all values of r, and there exists no hypersurface analogous to the Schwarzschild horizon at r = 2m. This means that there are no obstacles to communication with the singular ring at r = 0  = /2 . This is the case of naked singularity. The prevailing opinion in the astrophysical community is that real astronomical objects, when they are about to collapse to a black hole state, must somehow get rid of the excess angular momentum to achieve a2 < m2 . Nevertheless, our familiar celestial bodies, like the Sun and the Earth, have a2 > m2 (verification of this is left as an exercise for the reader).

468

The Kerr solution

If a2 < m2 , then !r > 0 for r < r− and for r > r+ , where the r± are given by (20.58). Between r− and r+ , the discriminant (20.119) is negative, which means that Rr cannot have any zeros there, which in turn means that dr/ds = 0. Hence, there exist no circular orbits in that region and no turning points for other orbits. An orbiting body that enters the region r−  r+  from the side of r > r+ must keep decreasing its r until it flies through the hypersurface r = r− . Unlike in the Schwarzschild case, however, it does not have to hit the singularity, since the orbit can have a turning point at r < r− . Conversely, a body that entered the region r−  r+  from the side of r < r− must keep increasing its r until it flies through the hypersurface r = r+ . Thus, the region r− < r < r+ is analogous to the region r < 2m in the Schwarzschild spacetime and to the respective region in the Reissner–Nordström spacetime. The analogy with the R–N spacetime is far-reaching; see Section 20.8. More information about the orbits follows from the graph of the function Emin r = E+ r; see Fig. 20.7. We consider only the case a2 < m2 and the region r > r+ , so the curves begin at r = r+ . Each orbit has a constant E ≥ Emin r = E+ r. Thus, the area accessible for motion is above the graph of Emin r, and the value of E determines the allowed range of r on the orbit. Note that Emin /0 → 1, independently of the value of r→

Lz . When Lz = 0, the function Emin /0 has a positive derivative for all r ≥ r+ , and so is smaller than 1 for all r ≥ r+ . However, if Lz  is sufficiently large, then there exists an interval r1  r2 , with r+ ≤ r1 < r2 , in which Emin /0 ≥ 1, and Emin /0 < 1 for r > r2 (see Exercise 11), independently of the sign of Lz . Thus, with Lz  sufficiently large, Emin /0 necessarily has a local maximum at some r = ru > r+ and a local minimum at r = rs > ru , just as is shown in Fig. 20.7. The region where Emin /0 < 1 is the locus of y unstable marginally stable stable

def

r

Fig. 20.7. Graphs of the function yr = Emin r/0 − 1 for different values of Lz . For every value of Lz , yr → 0 as r → . The lower graph corresponds to Lz = 0; then the function is all monotonic. The upper graph corresponds to Lz  being large – the function yr then has a maximum that determines the position of the unstable circular orbit and a minimum that determines the stable circular orbit. The middle graph approximately corresponds to such an intermediate value of Lz , at which the maximum and the minimum coalesce into a single point where d2 y/dr 2 = 0. This point then determines the position of the marginally stable circular orbit. The curves begin at r = r+ ; the y-axis is drawn at approximately this value of r.

20.7 Geodesics in the equatorial plane

469

bound orbits, and r = rs is the radius of the stable circular orbit (i.e. there exists one for each sufficiently large value of Lz , for each sign of Lz ). A circular orbit also exists at r = ru , but it is unstable. Note in (20.123) that a and Lz may have opposite signs. When aLz > 0, the orbital angular momentum of the orbiting body and the internal angular momentum of the source of the gravitational field have the same sense. Such orbits are called direct. When aLz < 0, the two angular momenta have opposite senses. Such orbits are called retrograde. The value of Emin at a given r is different for each of these orbits. The difference between them is a relativistic effect: the Newtonian gravitational field does not ‘feel’ in which direction the central body is rotating. It is only sensitive to the asymmetries in the gravitational field created by asymmetries (polar flattening) in the central body caused by the centrifugal force. Retrograde orbits in Newton’s theory are exactly the same as direct orbits. The qualitative difference between them in relativity is in fact quite pronounced. Note from (20.123) that with aLz < 0 and r sufficiently close to r+ (i.e. with !r close to zero) Emin < 0, so E can be negative. This is the total energy ‘at infinity’, with the energy equivalent of the rest mass included.1 Thus, E < 0 means that the whole energy contained in the particle is insufficient to actually send it to infinity. In other words, the energy that the particle must have lost on entering such an orbit was greater than the rest energy. This effect does not appear for direct orbits, or in the Schwarzschild limit a = 0. Where exactly can such negative-energy orbits occur? Note that the momentum of a physical particle must be a timelike vector, g  p p > 0. Let us choose an orthonormal tetrad, in which g ij = diag+1 −1 −1 −1; then for the tetrad components of the momentum we have p&0 2 − p&1 2 − p&2 2 − p&3 2 = 0 2 > 0 =⇒ p&3  < p&0  For the metric (20.57), we choose the following orthonormal tetrad:  e1 = e& dr e2 =  d e3 = e d −  dt e0 = e dt

(20.124)

(20.125)

where e2 = !r /B

e2& = /!r 

e2 = B sin2 /

(20.126)

and B and  were defined in (20.121).2 The tetrad components of the momentum, defined in (20.96), are then p&0 = e− E − Lz  

p&3 = e− Lz 

(20.127) & 0

From the first equation we have E = e p&0 + e p&3 . But p&0 = p > 0, as explained after (20.119). Hence, for E to be negative, e p&3 must be negative. Since p&3  < p&0 , it follows that 2 e2 > e2 , which means that g00 < 0. Thus, orbits with negative energy can exist only between the stationary limit hypersurfaces. 1 2

The gravitational field ‘at infinity’ vanishes, hence special relativity applies there, and in special relativity p0 = E is the total energy of the orbiting particle. The verification that the metric defined by such a tetrad coincides with (20.57) is rather laborious. The first thing to verify

is that !r 2 − 4a2 m2 r 2 sin2  = B r 2 − 2mr + a2 cos2  .

470

The Kerr solution

This was a necessary condition for the existence of orbits of negative energy. What is a sufficient condition? Suppose that p&1 = 0 at an initial point of the orbit. Then p&0 is bounded because p&0 2 = 0 2 + p&2 2 + p&3 2 , while p&2 2 = 2 ˙ 2 and p&3 2 = e−2 Lz 2 are both bounded in the region r > r+ ; see (20.110) and (20.121). Consequently, e p&0 can be made as small as we wish by taking r sufficiently close to r+ . Then, since E = e p&0 + Lz , and  is seen to have a positive value at r = r+ , it suffices to take aLz < 0 and such r that e p&0 < Lz  to achieve E < 0. Equation (20.123) simplifies for photon orbits, for which 0 = 0:   '  Emin = ±Lz r !r ± 2am D

(20.128)

where ‘+’ corresponds to Lz > 0 and ‘−’ to Lz < 0. One can show that, for any sign, the def

 / Lz  has exactly one maximum and no minima for r ∈ r+   (see function Fr = Emin Exercise 12). Thus, a photon orbit in the equatorial plane can have only one turning point and there are no stable circular orbits. For each value of Lz , there exists a circular orbit that lies on the maximum of the function Fr, and so is unstable. The same conclusion follows in the Schwarzschild limit a = 0 (see Misner, Thorne and Wheeler (1973) for more details on this subcase). A representative graph of the function Fr is shown in Fig. 20.8. Still more information about equatorial null geodesics can be drawn from the equation of radial motion. As seen from (20.109) and (20.118), for null geodesics (where 0 = 0) the affine parameter may be redefined by s = Es , so that only the ratio Lz /E enters the equation. Consequently, it may be assumed without loss of generality that E = 1. We redefine some of the variables as follows: def

= r/2m

def

& = − Lz /2m

def

= a/2m

(20.129)

F (r )

r

Fig. 20.8. The analogue of the graph from Fig. 20.7 for null geodesics in the equatorial plane. The curve begins at r = r+ . The graph has the same general shape for all values of Lz .

20.7 Geodesics in the equatorial plane

471

Then, for equatorial geodesics, for which C = 0, we obtain



def r˙ 2 = 3 + 2 − &2 +  + &2 / 3 =  / 3 

(20.130)

The turning points of the null geodesics are at the zeros of the polynomial  , and the motion can take place in those ranges of where  / 3 > 0. Since we will extend the Kerr manifold in the next section to include also negative values of r, we will take them into account here. Apart from the special arrangement in which = −&, i.e. a = Lz , the last term in  is always positive, so 0 > 0, while  becomes negative for sufficiently large negative . Thus,  typically has a real root at = 1 < 0 and is positive for some > 1 . Then any ray sent in from r = − will eventually return to r = − (the ray with = −& hits the r = 0 singularity). If &2 ≤ 2 while & = − , then there are no positive roots of , and any ray sent in from the side of positive will necessarily hit the singularity. If &2 is smaller than some &1 2 , then  is positive for all > 0 and such rays will hit the singularity, too. However, if &2 is sufficiently large, then  will have two positive roots. In that case, there will be rays that come in from r = + and turn back at a 2 > 0, possibly after circling the central body several times in a spiral, and rays that come from the side of r = 0 and turn back towards r = 0 after reaching a maximal distance 0 < 1 < 2 . The situation is shown in Fig. 20.9. Figures 20.10 and 20.11 show the situations when a2 = m2 and a2 > m2 , respectively. The contours separating the allowed and prohibited areas are graphs of the &  function found by solving the equation   = 0 for &; from the definition (20.130) the solution is '   def (20.131) 1 −  = &±   & = − ±   2 − + 2 In comparing Eq. (20.131) with the figures note well that the relation between the various branches of &  depends on the sign of , in consequence of the   in front of the square root. Namely, in the < 0 area of Fig. 20.9, the upper branch corresponds to &−  , and the lower branch to &+  , while the opposite is true in the > 0 area. Also, note well that it is / 3 that must be positive in the allowed region; hence in the < 0 area the allowed region is where  < 0. For timelike geodesics, we can choose the affine parameter so that 0 = 1. We define def

 = E 2 − 1, and, using (20.129), we obtain from (20.109) and (20.118) (with  = /2): r˙ 2 =



def 1 1 3  + 2 + 2  − &2 +  E + &2 = 3  

3

(20.132)

The allowed range of r is given by  / 3 ≥ 0. The zeros of   exist only for those values of at which the discriminant of   treated as a function of & is non-negative, thus  =  − −   − +   + 1 ≥ 0

(20.133)

472

The Kerr solution

λ λ−

λ−

ρ− ρ+

ρ

λ+

λ−

λ+

Fig. 20.9. The allowed ranges of & and for null geodesics in the case a2 < m2 (the areas covered with crosses are prohibited). For & sufficiently small or sufficiently large, the rays can either emanate from = 0 and turn back at a finite distance, or come in from r = + and turn back to infinity at a finite distance. In between, on the > 0 side, the rays mostly hit = 0, except for a small range of &, in which there is the little prohibited ‘peninsula’. On the < 0 side, all rays that come in from the direction of r = − turn back at a finite distance, except the rays with & = − that hit the singularity. The right tip of the peninsula is at = − , the radius of the inner event horizon. The left tip of the prohibited wedge in the > 0 region is at = + , the outer event horizon. With decreasing , the peninsula shrinks and its left tip moves towards the -axis (and so does the tip of the white wedge on the left), the upper prohibited area on the right moves down and left, while the lower prohibited area moves down and right. In the limit a = 0 the peninsula disappears, and the whole graph becomes mirror-symmetric with respect to the -axis. For what happens when a increases, see Figs. 20.10 and 20.11.

where ± are the event horizons; − < 1/2 − < + < 1. Note that  ≥ −1 by definition. The following cases have to be considered: Case 1:  < 0. Then  ≤ 1, and  ≥ 0 for 0 ≤ ≤ − and for + ≤ ≤ 1/. By considering the signs of  and of 1 −  (the coefficient of &2 ), the following subcases are discerned: (a) < 0 – this area is all prohibited; (b) 0 ≤ ≤ − – orbits exist for & ≤ &− and for & ≥ &+ , where  √ ' &±   = − E ±  1 −  (note that &− < &+ when < 1 and &+ < &− when > 1); (c) − < < + – all values of & are allowed; (d) + ≤ < 1 – orbits exist for & ≤ &− and for & ≥ &+ ;

(20.134)

20.7 Geodesics in the equatorial plane

473

λ λ–

λ–

ρ

ρ− = ρ+

λ+

λ–

λ+

Fig. 20.10. The allowed ranges of & and for null geodesics in the critical case a2 = m2 . The little prohibited peninsula from Fig. 20.9 has extended to touch the tip of the lower prohibited area. The contact point has = − = + .

λ λ–

λ–

ρ

λ+

λ–

λ+

Fig. 20.11. The allowed ranges of & and for null geodesics in the case a2 > m2 . The two prohibited areas at  > 0 & < 0 merged into one. As a2 increases, the lower prohibited wedge becomes gradually wider and its tip moves down, while the upper prohibited area on the right moves up and farther to the right.

474

The Kerr solution





(e) = 1 – orbits exits for & ≥ −  2 2 + 1 + 2 + 1 /2 E; (f) 1 < ≤ 1/ – orbits exist for &+ ≤ & ≤ &− ; (g) > 1/ – this area is all prohibited. Figure 20.12 shows Case 1 with a > 0. The curves &  determined by   = 0 have vertical tangents at = 0 = ±  → 1 and at = −1/. At > 1, the part above each ‘belly’ in the main figure is the &−   branch; the part below is &+  . At < 1, the roles of &− and &+ reverse, with &− going to + or − as → 1± , respectively. Curve (a) corresponds to  = −1; curves (b)–(d) correspond to increasing values of . The λ

ρ a b c

b c d

λ a

ρ+

1

ln ρ

Fig. 20.12. The allowed ranges of & and for timelike geodesics in the case a2 < m2 , for different values of . All the curves correspond to a > 0 and  < 0;  increases from curve (a) (on which  = −1 ⇐⇒ E = 0) to curve (d). The allowed areas are to the left of each curve. With  < 0, the whole region < 0 is prohibited. Little prohibited peninsulas similar to the one from Fig. 20.9 are present also here; they are shown in the inset (where curve (d) is omitted). The scale on the -axis is logarithmic in the main figure and linear in the inset. Horizontal lines show the allowed ranges of on two bound orbits. Since a > 0 for all curves, & > 0 corresponds to retrograde orbits and & < 0 to direct orbits; the figure clearly shows their inequivalence. There exist allowed regions also with < 0 when  > 0; see the text.

20.8 * Maximal analytic extension

475

information about the allowed ranges of & can be briefly summarised by saying that the allowed area is to the left of each curve. The inset shows a magnified view of the region 0 ≤ ≤ − , where small prohibited ‘peninsulas’, similar to the one seen in Fig. 20.9, exist. Case 2:  > 0. Then  ≥ 0 and there are the following ranges of to consider: (a) ≤ −1/, (b) −1/ <

< 0, (c) 0 ≤ ≤ − , (d) − < < + , (e) + ≤ ≤ 1 and (f) > 1. In cases (a), (c) and (e) the allowed range is & ≤ &− and & ≥ &+ , in case (f) the allowed range is &− ≤ & ≤ &+ , in the remaining two cases all values of & are allowed. Case 3:  = 0. Details of Case 2 and the whole Case 3 are left as an exercise for the readers. Bound orbits exist in those cases where a line & = constant in the graph has a segment that runs in the allowed region and has both ends on the same &  curve. In Fig. 20.12 such bound states exist for curves c and d; two of them are shown.

20.8 * The maximal analytic extension of the Kerr spacetime This section is based on the paper by Boyer and Lindquist (1967), who were the first to construct a complete extension of the case a2 < m2 . Important contributions to this subject were published also by Carter, who first constructed such an extension along the symmetry axis (Carter, 1966b) and then extended the Boyer–Lindquist (B–L) construction to the charged case (Carter, 1968b) and to the critical case a2 = m2 (Carter, 1973). It can be predicted that the maximal extension of the Kerr spacetime will be qualitatively similar to the corresponding extension of the Reissner–Nordström (R–N) spacetime (see Section 14.15). In the Schwarzschild spacetime, the singularity at r = 0 lies in the region where the hypersurfaces r = constant are spacelike, i.e. transversal to all causal curves. Hence, any causal curve running in that region must hit the singularity after a finite proper time (or, for null geodesics, at a finite value of the affine parameter). In the R–N and Kerr spacetimes, the singularity at r = 0 lies in the region where the hypersurfaces r = constant are timelike. Consequently, it is possible for a causal curve in that region to steer clear of the singularity. Any such curve in the R–N spacetime can be continued infinitely far to the future, but, in consequence of the geometric arrangement of the event horizons, it cannot return to the asymptotically flat region from which it entered – this would require travelling backward in time. This is how the infinite chain structure arises. We will find a similar thing to happen in the Kerr spacetime. The B–L coordinates are useful for many calculations, but not for considering the extensions across spurious singularities, since they had in fact introduced these singularities. Therefore, we will have to begin with other coordinates.

476

The Kerr solution

Take the Kerr metric in the form (20.52) and find its inverse. It is      2  2  " 2 " 1 2 " " " 2 = − − 2a r +a "s "t  "r "r "  2  2    " 1 2mr " " " 2 + + +  − "  "t "r sin2  "

(20.135)

This has the Kerr–Schild form (20.9), in which the flat metric (the limit m = 0 of (20.135)) is expressed in spheroidal coordinates. The Kerr–Schild vector field k is seen to be proportional to

 k = kt  kr  k  k = 1 −1 0 0 (20.136) It turns out that this is exactly the Kerr–Schild field – it obeys k k  = 0, i.e. it is affinely parametrised. In fact, since k = dx /ds, the coordinate t or r can be chosen as the affine parameter. Since kt > 0, the vector field k is future-pointing, and, since kr < 0, it is ingoing. It is tangent to the surfaces  = constant  = constant. With  = /2, the null geodesics tangent to k proceed towards smaller r until they cross the r = 0 disc and continue into the r < 0 region. The null geodesics lying in  = /2 hit the ring singularity at r = 0  = /2 . However, since the Kerr metric is of Petrov type D, it defines a second degenerate Debever congruence (call it  ), which, by virtue of the Goldberg–Sachs theorem 16.4, must also be geodesic and shearfree. There is no reason why one of these congruences should be preferred, so it should be possible to express the Kerr metric in the Kerr– Schild form (20.9) also with respect to  . The B–L coordinates of (20.57) are helpful in identifying  . The metric expressed in them is invariant under the substitution dr → −dr, which changes the ingoing field (20.136) into an outgoing one, and so puts an outgoing field into the position of k . That outgoing field must thus be a Kerr–Schild field, too. To find that second field we transform k to the B–L coordinates, obtaining



k = r 2 + a2 /!r  −1 0 a/!r  (20.137) which implies that  =





r 2 + a2 /!r  +1 0 a/!r 

and then we transform  back to the coordinates of (20.52):



 = r 2 + a2 + 2mr /!r  +1 0 −2a/!r 

(20.138)

(20.139)

The coordinate r is still an affine parameter on the geodesics tangent to  , but t is not. The expressions (20.138) and (20.139) become singular where !r = 0. To find the expression for  on the horizons, we note that it is proportional to the vector field (in the B–L coordinates)

   = r 2 + a2  !r  0 a  (20.140)

20.8 * Maximal analytic extension

477

At r = r± , the field   , while being still null, becomes  ± = N 2mr±  0 0 a, i.e. it becomes tangent to the r = r± hypersurfaces. Thus, the hypersurfaces r = r± are tangent to the light cones, i.e. matter and light can cross them in one direction only (they are crossed by the null curves tangent to k , which is an ingoing field, so the allowed direction

is is from outside in). This confirms that they are event horizons. Moreover, note that  ± geodesic and affinely parametrised. In the coordinates of (20.52), the fields k and  appear non-symmetrically, while they play similar roles in the metric. This is because the coordinates of (20.52) are adapted to the field k . Since in the B–L coordinates the roles of these fields are interchanged by the substitution dr → −dr, we find the coordinates adapted to  in the following way: (1) carry out the substitution dr → −dr in (20.57); (2) carry out the transformation inverse to (20.56) on the result of step (1) – the result will be (20.52) with dr replaced by −dr  (or, equivalently, with t  replaced by −t −); (3) carry out the same two transformations on the components of the fields k and  . The result will be



k = r 2 + a2 + 2mr /!r  −1 0 −2a/!r  (20.141)  = 1 +1 0 0

i.e. the roles of k and  are now interchanged, except that k is still ingoing, while 

is still outgoing. In these coordinates it is seen that k at the horizons is tangent to them. This looks mysterious, but the coordinates of (20.136) (call them, after Boyer and Lindquist (1967), an E frame) and of (20.141) (call them an E frame) do not have the same domain, and the horizon tangent to k is not the same one that is tangent to  . To see this, note that both vector fields are future-pointing, k is ingoing and  is outgoing. Begin at a point in the r > r+ region and proceed along the null geodesics tangent to k . Since it is ingoing, by moving to the future you proceed towards smaller r, and you will eventually cross the surface r = r+ (at which k has no singularity). Not so with the 

field – if you follow its integral lines to the future from any point in r > r+ , then you proceed towards larger r and you will never reach any of the horizons. In order to meet the r = r+ hypersurface, you would have to move along  to the past. The transformation from E to E is regular for all values of r only when a2 > m2 , but then no horizons exist. When a2 < m2 , the domains of the two frames overlap only partially. The transformation is r −r   r − r   2m   + − t = t − √ r+ ln   − r− ln    2m 2m m2 − a2 (20.142)    r − r+  a    =− √ ln  m2 − a2  r − r−  and it is singular at both horizons. Thus, the extension of the region r > r+ along the k field, obtained by transforming to the E frame, is not the same as the extension along the  field obtained by transforming to the E frame. This is an analogy to the Kruskal extension of the Schwarzschild manifold. These inequivalent extensions now have to be put together into an extended manifold. Let us begin with the region r > r+ and the E frame, and let us move back in time along

478

The Kerr solution

the  field. We can carry out the transformation from the E frame to the B–L coordinates separately in each of the regions r > r+ , r− < r < r+ and − < r < r− . Hence, this E frame can be understood to be the common extension of these three regions; we will call them regions 0, −1 and −2, respectively. Now let us go back to the r > r+ region, let us transform the coordinates to the E frame and let us move forward in time along the k field. Again, we can carry out the transformation from the E frame to the B–L coordinates in each of the regions r > r+ , r− < r < r+ and − < r < r− . The first one will be the same 0 as before, but the other two will be different from −1 and −2 since they lie to the future of 0. We shall call them +1 and +2, respectively. The result of these extensions is schematically shown in Fig. 20.13 on the left. But then, in the −1 region the field k exists together with . Since !r < 0 there, we see from (20.141) that a future-pointing field is actually −k , not k itself, and −k  is outgoing there, just like  . We will thus hit the r = r+ horizon irrespective of whether we move along −k  or along  . However, the horizon that we meet when moving along −k  is not the same as that which we meet when moving along  . At the first one,  becomes tangent to it, while −k  crosses it smoothly (as can be seen by transforming to the E frame); at the second one −k  becomes tangent and  crosses it. Thus, just like we did in the Kruskal extension of the Schwarzschild spacetime, we must assume that there are two ways back to the future from region −1 and that there exists

r = r– 2

r = –∞

r = r–

r = –∞

2

r = +∞ r = +∞

r = r+

0″ r = r+

0

r = –∞

r = r– –2

r = –∞

0

r = +∞

–2″

r = –∞

r = r– 1

1

–1

2″

–1 r = r– r = –∞

–2 r = r–

Fig. 20.13. Left: The coordinate patches −1 and −2 obtained by extending the region r > r+ along the  field (in the E frame), and the coordinate patches 1 and 2 obtained by extending the same region along the k field (in the E frame). Right: The coordinate patches 0 and −2 were added by extending the −1 patch along the k field, and then the coordinate patches +1 and +2 were added by extending the 0 patch along the  field. At this point there is no justification yet for identifying the patches 1 and 1, and not even for placing 0 side by side with 1, but a proof that this is correct is provided further on in the text. The straight segments of the edge of the figure are null infinities. Spatial infinities are the extreme points on the left and on the right. The extreme points at mid-height are +; the others are −.

20.8 * Maximal analytic extension

479

a second copy of region 0 that we will call 0 . Similarly, when we move from region −1 along −k back in time across r = r− , we obtain a second copy of region −2 that we will call −2 . Let us then move from region −1 to 0  along the −k field.1 We are then back in a region where !r > 0, so k itself is future-pointing and ingoing, while  is future-pointing and outgoing. By moving along k to the future across r = r+ and then across r = r− , we create second copies of regions +1 and +2 that we call +1  and +2 , respectively. By analogy with the Kruskal extension of the Schwarzschild spacetime, we expect that we can identify regions +1 and +1  – after all, there are timelike curves inside the light cone tangent to the k and  fields with vertex in the region −1, and their future should be continuously predictable. This (at this point still hypothetical) identification is shown in Fig. 20.13 on the right. However, in order to prove that such an identification is correct, we must find a coordinate map that will cover regions 0 +1 +1  0  and −1 simultaneously and will show explicitly that +1 and +1  coincide. There is a difficulty here. In the Schwarzschild case, the a → 0 limits of k and 

are tangent to the surfaces  = constant  = constant , and the Kruskal diagram shows that surface. Here, the fields k and  are not surface-forming, so we cannot adapt coordinates to them. We will choose such coordinates u and v that the integral curves of k and  will lie in the hypersurfaces u + v = constant and u − v = constant, respectively. Take the B–L coordinates, since in them both null fields are treated on a nearly equal footing – see Eqs. (20.137) and (20.138). As we approach the r = r+ hypersurface along these fields, they approach the direction 2mr+  0 0 a, which is a tangent vector to the helix in spacetime with the equation d/dt = a/2mr+ . In the first step, we transform the -coordinate so that the fields approach the horizon along the hypersurface  = constant. We call the new -coordinate w and transform w =  − at/ 2mr+ 

(20.143)

(this is not the only possible transformation that ‘untwists’ the fields at the horizon, but it is the simplest one). This makes kw r+  = 0, as desired. The k and  fields obey

 dt/dr = ± r 2 + a2 /!r (20.144) (plus the equation that determines wr). The solution of (20.144) is 

r ±t exp + def



± = mr± /

√

1

r − r+  r − r− −r− /r+ def = Fu ± v = constant 2m 2m m2 − a2 

Actually, after we have crossed the r = r+ hypersurface, we have to move on along k again.

(20.145)

480

The Kerr solution

We want to cancel the spurious singularity at r = r+ (we will deal with the one at r = r− later). Using the extension of the R–N metric as a guide (see Section 14.15), we guess Fu ± v = u ± v2  Then we obtain

(20.146)

  r − r+  r − r− −r− /2r+  r ±t  exp u±v = 2m 2m 2+   def r − r+ r − r+ −r− /r+ r/ e + = u2 − v 2  'r = 2m 2m   2uv t = + arctanh 2  u + v2

(20.147) (20.148)

This is well defined in the u v plane except on the straight lines u2 = v2 , where t becomes infinite. We have 'r → −, 'r+  = 0 and 'r → +. The function r→r−

r→+

'r is well defined and analytic on the whole plane, so ru v exists for all values of u and v. The function tu v is analytic everywhere except at the two straight lines. In spite of that, the Kerr metric transformed to the u v  w coordinates is analytic for all values of u and v, including the two straight lines. To see this, verify that the result of the transformation is  2 2+ f+ 1 2 2 ds = v du − u dv − a sin !r dw !r r+ 2 + a2  2   4+ 2 f 2 2+ f + − v du − u dv dv − du2 2 2 2 2 2 r +a r + a   2

2  sin2  af r + r+  2 2 −  d − v du − u dv + r + a dw  √  m2 − a2 r − r−  (20.149) def

± =  r±    def

fr =

 r − r 2m/r+ !r − e−r/+  = 4m2 'r 2m

The only term that might cause problems is the one with !r in the denominator, which has a zero at r = r+ . However, the numerator has a zero of the same (first) order there, so the ratio has a finite limit and the metric is analytic for all values of u and v in the range − +, of w ∈ 0 2 and of  ∈ 0 . (But recall that u2 − v2 = − corresponds to r = r− , so the extension we have just found has dealt with the spurious singularity at r = r+ , but not with the one at r = r− . We will deal with that one below.) Since r = r+ is no longer a singularity for (20.149), this is the metric that applies throughout regions 0, +1, 0  and −1 in Fig. 20.13, so we have shown that the identifications made in that figure can indeed be made.

20.8 * Maximal analytic extension

481

In order to remove the spurious singularities at r = r− , we would have to choose Fu ± v = u ± v−2r− /r+ in (20.146), with a result analogous to (20.148). Then the range u ∈ − +, v ∈ − + would cover the region r ∈ − r+ , but the true singularity at ru v = 0  = /2 would still be there. The coordinate system thus obtained would apply throughout the regions −2 −1 −2 and +2 +1 +2 , plus in the regions +3 and −3 that we are going to construct now.1 We can continue the process of extending the spacetime in the same way both upwards and downwards, see Fig. 20.14. Thus, we can generate regions +3 and +4 by adapting the coordinates to the  field in region +2 and proceeding to the future, and we can generate regions +3 and +4  by adapting coordinates to the k field in region +2  and proceeding to the future. Likewise, we can extend region −2 along the k field to the past and thus generate regions −3 and −4, and extend region −2  along the  field to the past, thus generating regions −3 and −4 . Exactly as in the case of the R–N spacetime (see Section 14.15) we must then decide whether we wish to continue the process ad infinitum, or to identify two regions that are isometric, for example −1 and +3. Like in the R–N case, the lines r = constant are hyperbolae in the surface  = constant  = constant (compare Eqs. (14.149) and (20.148)), so the remark after Eq. (14.156) applies also here – they will still be hyperbolae after the surface has been compactified by (14.154)–(14.156). They are drawn accordingly in Fig. 20.14. Again in analogy to the R–N case, they are timelike for r > r+ and r < r− , and spacelike for r − < r < r+ . The arcs of hyperbolae in Fig. 20.14 represent the r = constant hypersurfaces; they are timelike in even-numbered areas and spacelike in odd-numbered areas. The thick arcs represent the sets r = 0; they are nonsingular except at  = /2. This is the only difference from the corresponding diagram for the R–N spacetime (Fig. 14.10): here, null and timelike curves can be continued through the open disc r = 0  = /2 to r → −. The left and right edges of Fig. 20.14 are null infinities; those with numbers divisible by 4 are +, the remaining ones are −. The extreme points of the edges are the corresponding spatial infinities. Thick straight segments are the event horizons, alternately r− and r+ . Identifications can be made so that an odd-numbered area with number n is identified with the area numbered n + 4k, where k is a natural number. There remains now the question of geodesic completeness of the mosaic manifold represented by Fig. 20.14. We call a manifold geodesically complete if every geodesic in it can be continued to an arbitrarily large absolute value of the affine parameter. We already know that the extended Kerr manifold is not geodesically complete in the strict sense: there are null geodesics that hit the ring singularity r = 0  = /2 at a finite value of the affine parameter and cannot be continued further. But we can consider the geodesics that do not run into these singularities and then ask whether they can be continued indefinitely. It turns out that in the extended Kerr geometry they can. 1

In fact, these coordinates could be used to extend regions −2 and −2  through r = r− to cover the not-yet-constructed region −3 between them, and likewise to extend +2 and +2  to +3, but we will do it by the previous method.

482

The Kerr solution

+5

+4″

+4

+3 –∞

–∞ +2

r–

+2″

–∞

–∞ +1

∞

∞ 0″

r+

0

∞

∞ –1

–2

r–

–2″

–3

–4″

–4

–5

Fig. 20.14. The compactified u v surface of the maximally extended Kerr spacetime. The arcs of hyperbolae are the r = constant lines, the thick arcs are the r = 0 lines. More explanation is given in the text.

20.8 * Maximal analytic extension

483

Consider the geodesic equations (20.109)–(20.112). We applied them to timelike and null geodesics only, but spacelike geodesics are automatically included if we replace the parameter 0 2 with a negative quantity. The infinite values that appear as r → ± are no problem, since we know already that the spacetime becomes approximately flat there, and so complete. The components of the tangent vector to a geodesic become infinite at  = 0, sin  = 0 and !r = 0. The set  = 0 is just the singularity that we know exists. The set sin  = 0 is the axis of symmetry. As seen from (20.110), a geodesic can run only in the regions where % ≥ 0, and % → − as  → 0, unless Lz = 0. Thus the axis cannot be intersected by any geodesic that has Lz = 0, and for those with Lz = 0 the set sin  = 0 is nonsingular. Thus, we have to take care only about the infinities in t˙ and ˙ that appear on the horizons !r = 0. Before we continue, note that a timelike or null geodesic can properly be called ingoing only when along it, simultaneously, either dt/ds > 0 and dr/ds < 0 or dt/ds < 0 and dr/ds > 0. This can be summarised in the single inequality dr/dt < 0. By looking at Eqs. (20.107), (20.109) and (20.112) we see that a geodesic is ingoing at r± if and only if the quantities r˙ r±  and 2mr± E − aLz  have opposite signs. Now take the geodesic equations (20.111) and (20.112) and transform them by the transformation inverse to (20.56) (in which, recall, t and  are the B–L coordinates). The result is (the non-primed coordinates are now those of (20.52)): (

) 2 t˙ = −Ea2 sin2  + r 2 + a2 E − 2mraLz + 2mr r˙ /!r  (20.150) 2 ˙ = Lz / sin  + a 2mrE − aLz + r˙ /!r  If r˙ and 2mr± E − aLz  have opposite signs (i.e. if the geodesic is ingoing), then the terms in braces vanish at both horizons, and their quotients by !r have finite limits, which means that we have removed the singularities by a coordinate transformation. But why does this work only for ingoing geodesics? This is because the coordinates of (20.52) are adapted to the k field, which is ingoing, so they apply only in those regions where k is finite. In order to deal with outgoing geodesics, we must employ coordinates adapted to the outgoing  field, i.e. coordinates related to those of (20.150) and (20.52) by (20.142) (t and  are the new coordinates, while t and  are those of (20.150)). Indeed, after the transformation the terms containing r˙ in (20.150) change signs, so these coordinates remove the singularities at !r = 0 for outgoing geodesics. Thus, by switching between coordinate systems we can carry all geodesics through both horizons. Consequently, if a geodesic does not strike the true singularity at  = 0, it can be continued to arbitrarily large absolute values of its affine parameter. The foregoing discussion concerned geodesics intersecting r = r± , but in fact the conclusion applies also to geodesics that have turning points at r = r± or approach r = r± asymptotically (by winding around the horizon). The key point was that t˙ and ˙ remain finite as r → r± , asymptotically or not. What remains are the null geodesics that run along the horizons – we left them after (20.140) for separate consideration. For such geodesics r = r± = constant˙r = 0 !r = 0

484

The Kerr solution

and, as seen from (20.140), ˙ = 0. It follows further from (20.140) that on the horizon ˙ = at˙/ 2mr±  

(20.151)

With this, (20.104) and (20.105) imply E = Lz = 0, and then (20.108) implies that also K = 0. Substituting (20.140) and (20.151) in the geodesic equation we find1 t = s + s1 

 = a s + s2  / 2mr±  

(20.152)

where s is an affine parameter and s1 and s2 are arbitrary constants. Such a geodesic can obviously be continued to s → ±. Finally, then, all geodesics that do not strike the ring singularity  = 0 can be continued to infinite absolute values of their affine parameters. We could draw figures similar to Figs. 14.7 and 14.11 for the surface t = constant  = /2 in (20.57). This surface has the metric   r2 2ma2 2 2 2 d2  + r dr + + a (20.153) ds2 2 = 2 r − 2mr + a2 r If we want to embed it in a flat space, then the Cartesian coordinates in the flat space must be given in terms of r and  as x = Fr cos 

z = ±Gr

(20.154)

2

r − ma2 /r 2 r2 = (r = 2 −  r − 2mr + a2 2ma2 /r + r 2 + a2

(20.155)

with F and G obeying F = Gr

2



y = Fr sin 

2ma2 /r + r 2 + a2  def

Just as in the R–N case, the embedding can occur in a Euclidean space when (r ≥ 0 and in a pseudo-Euclidean space otherwise. It may be verified that (r > 0 for r ≥ r± (see Exercise 14). However, for r < r+  (r can change sign several times. Thus, several embeddings would be necessary to represent the full collection of shapes. Figure 20.15 shows the embedding of the region r ≥ r+ . In the extreme case a2 = m2 we use as a guide the e2 = m2 case of R–N Eqs. (14.163)– (14.166)) and the procedure applied earlier in this section. The considerations about the null Kerr–Schild fields k and  do not depend on whether a2 < m2 or a2 = m2 . So, in the present case, one of the fields passes through the hypersurface r = m smoothly, while the other becomes tangent to it. The transformation (20.143) that ‘untwists’ the helical field is here w =  − t/2m, and the solution of (20.144) is r  2m2 def + 2m ln −1  (20.156) ±t = r = r − m − r −m m 1

The result obtained by Boyer and Lindquist (1967) in a strangely roundabout way is equivalent to (20.152), but their parameter is non-affine.

20.8 * Maximal analytic extension

485

Fig. 20.15. An axial cross-section through the surface (20.154) for the region r ≥ r+ (thicker line) and the corresponding cross-section for the Schwarzschild metric (thin line; this is a cross-section through the surface from Fig. 14.7). For the Kerr metric, the quantity on the horizontal axis is Fr – the geometric radius of a circle r = constant in (20.153). The surfaces are tangent at the equator (verify that Fr+  = 2m). Compare this figure with Fig. 14.11 for the Reissner–Nordström spacetime.

We now introduce the null coordinates p and q such that the fields k and  obeying (20.144) lie in the hypersurfaces p ± q = constant; they are p = t + , q = t − . The transformed metric is   1 r − m2 2mr ds2 = 1− dp + dq2 − dp − dq2 −  d 2 4  4 r 2 + m2    2m2 r sin2  dp dq + dp + dq dw + +  2m 2m    dp 2m3 r sin2  dq 2 2 dw + − +r +m +  (20.157)  2m 2m and it is non-singular everywhere except at the ring  = 0. The coordinates p q have infinite ranges, so in order to compactify the space and be able to draw a diagram like Fig. 20.14, we transform p q just like we did in (14.166), p = tan P q = tan Q. The resulting picture is again easy to construct, by analogy with Fig. 14.14. We can extend the region r > m across r = m either along the ingoing k field to the future, or along the outgoing  field to the past. Once we have crossed the r = m hypersurface, there is nothing to prevent us from going to r → −, unless we hit the r = 0  = /2 singularity. But on the other side of the horizon, when we used the k field to cross it, we can use the  field to go to the past; and when we crossed the horizon along the  field, we can use the k field to go to the future. What results looks like Fig. 20.14, but with the odd-numbered regions all squeezed to lines, together with their lower-left and upper-right neighbours; see Fig. 20.16. All r = constant surfaces are now either timelike or null. This

486

The Kerr solution

Fig. 20.16. The P Q surface of the maximally extended Kerr spacetime with a2 = m2 . The whole left edge represents r = −, the whole right edge corresponds to r = +. The thick straight segments form the horizon r = m; the thick hyperbolae are the r = 0 sets. More explanation is given in the text.

extension was first constructed by Carter; see Carter (1973) for a brief presentation and references to earlier work. Just like in the extremal R–N case, the invariant spatial distance from any point in the r > m region to the horizon at r = m along a curve of constant t   is infinite, and the embedding of the r > m part of the surface t = constant  = /2 looks very much like the left part of Fig. 14.15.

20.9 * The Penrose process Penrose (1969) contemplated a process by which, in principle, the rotational energy of a Kerr black hole can be extracted. The idea is based on the observation we made after Eq. (20.127), that a body on a retrograde orbit inside the stationary limit hypersurface can have a negative total energy if it is close enough to the event horizon r = r+ . In brief, Penrose’s idea was this: put two masses at the ends of a sufficiently strong spring, then squeeze the spring and bind the masses together. Then send the composite on an orbit that

20.10 Locally nonrotating observers

487

enters the region between the stationary limit hypersurface and the event horizon r = r+ . That region is called the ergosphere, and the meaning of this name will become clear at the end of this section. Design the orbit so that it has its turning point very close to r = r+ (how close will become clear below). When the composite object is at the turning point, release the spring in such a direction that one of the masses is sent, with r˙ = 0 at the initial point, on a retrograde orbit with a negative energy and with Lz  sufficiently small that it falls through the event horizon. It follows from the reasoning between Eqs. (20.127) and (20.128) that this is possible: we direct the ejected mass so that aLz < 0, we make Lz  small enough that the mass is sure to go through r = r+ (see Fig. 20.12), and the orbit has to be pre-designed so that at the turning point e p&0 < Lz . Since the mass dropped into the black hole carried away some negative energy, the other mass acquires some additional energy, and additional momentum by recoil so that it is sure to return to the outside of the stationary limit hypersurface – and it does so having a greater energy than it had at the beginning of the journey. This trick can be applied for as long as the stationary limit hypersurface and the horizon exist. The logical conclusion is that the extra energy of the returning mass was gained at the expense of the rotational energy of the black hole: the slower the black hole rotates, the smaller a becomes, and the smaller the volume of the ergosphere. Strictly speaking, however, this is a speculation that goes beyond the area of applicability of the Kerr metric. In order to discuss this energy-extraction process in a perfectly correct way, we would have to use a nonstationary solution in which the angular momentum of the source of the gravitational field can depend on time. The ergosphere was named after the Greek word o, meaning ‘work’ – because, as shown, thanks to its existence, a rotating black hole is in principle able to do some work.

20.10 Stationary–axisymmetric spacetimes and locally nonrotating observers The Kerr spacetime, with its two commuting Killing fields, is an example of a stationary– axisymmetric spacetime. We call a spacetime stationary when its metric tensor allows a timelike Killing field (if the Killing field is hypersurface-orthogonal, then the spacetime is called static). We call it axisymmetric when there exists a Killing field whose integral lines are closed, and there exists a location in the spacetime at which the length of the lines goes to zero. (Take a look at (20.57) – the length of the lines of constant t r  is zero at  = 0.) For the stationary–axisymmetric spacetimes it is assumed in addition that the two Killing fields commute; in consequence they are surface-forming. Then, coordinates can be chosen so that the metric is independent of x0 = t (where dx /dt = k – the timelike Killing field) and of x3 =  (where dx /d = k – the 0

3

Killing field connected with axial symmetry). Let us call the other two coordinates x1 and x2 . At this point, it is assumed in addition that the surfaces generated by the Killing fields admit orthogonal surfaces, i.e. that in the coordinates adapted to the Killing fields g01 = g02 = g13 = g23 = 0 (this property is called orthogonal transitivity). This is equivalent

488

The Kerr solution

to the requirement that the metric, and the motion of matter if any is present, is invariant 1 under the discrete transformation   t  → −t −. Several theorems were proven k  k = 0 and the orthogonal transitivity follow from other

in which the property

0 3

assumptions. The intention of those theorems (see Stephani et al. (2003) for a brief listing) was to show that spacetimes that do not possess these properties are rare, unimportant or weird in some sense. The fact is, though, that not much is known about the cases left out – no exact solutions of the Einstein equations have been found in those cases. In a stationary–axisymmetric spacetime that is orthogonally transitive, coordinates in the x1  x2  surfaces can be chosen so that g12 = 0 – since we know that every 2-dimensional metric is conformally flat, and the property g12 = 0 is even weaker than that. The metric is thus ds2 = g00 dt2 + 2g03 dt d + g33 d2 + g11 dx1 2 + g22 dx2 2 

(20.158)

When two Killing fields exist and nothing else is assumed about them, the basis of the space of Killing fields can be chosen arbitrarily. The transformation of the basis of the form  k = C0 k + C3 k 

0

0

 k = D0 k + D3 k

3

3

0

3

induces a transformation of the coordinates adapted to the Killing fields; the coordinates t    adapted to k  and k  are related to t  by 0

3

t = C0 t + C3 

 = D0 t + D3 

(20.159)

Such a transformation preserves the independence of the metric tensor of t and  and the orthogonal transitivity property; it only reshuffles the components g00  g03 and g33 among themselves. Note, however, that the Killing fields are in fact unique if they correspond to stationarity and axial symmetry, and it is assumed in addition that the spacetime is asymptotically flat. Then the integral lines of k are closed, and the coor3

dinate  defined by this field is periodic with the period 2. This excludes those transformations (20.159) in which C3 = 0, or else the strange behaviour illustrated in Fig. 20.17 would occur: after increasing  by 2C0 D3 / C0 D3 − C3 D0  we would land def

at the same t line from which we started, but with the t -coordinate increased by !t = −2C3 D3 / C0 D3 − C3 D0 . The orbits of the k field would thus be disrupted and changed 3

into infinite helices, while on two sides of the initial t line adjacent points would exist whose time coordinate would differ by !t . The time coordinate would thus fail to be a continuous function of the spacetime point.2 1 2

An example of a configuration that does not obey this is a rotating gaseous body, inside which the gas circulates in the meridional planes. However, exactly this kind of time coordinate is used on the surface of the Earth – the discontinuity occurs across the line of change of date that runs through the middle of the Pacific.

20.10 Locally nonrotating observers

489

ϕ′ = constant

t ′ = constant

Fig. 20.17. A coordinate transformation of the form (20.159) would result in disrupting the orbits of the k field and in a discontinuous time coordinate. The thick helix segment shows the jump in 3

t along the  = 0 line (given in the text).

The constant D0 has to be zero for a different reason. Suppose that the coordinates of the stationary–axisymmetric spacetime that is asymptotically flat go over, asymptotically, into the cylindrical coordinates: ds2 = dt2 − r 2 d2 − dr 2 − dz2 

(20.160)

This means that asymptotically g03 must go to zero while g33 /r 2 goes to −1. After a transformation (20.159) with D0 = 0, in the coordinates adapted to the transformed Killing fields, the g03 component becomes  g03 = g03 − D0 g33  / D3 C0  

and would fail to go to zero asymptotically at infinity. Consequently, D0 = 0 in consequence of the assumed asymptotic flatness. Finally, D3 = 1 in order that the period of  is 2. Thus, the only freedom remaining is the choice of the unit of time, connected with C0 . This uniqueness allows us to introduce the notion of locally nonrotating observers (Bardeen, 1970). Write the metric (20.158) in the form ds2 = e2 dt2 − e2 d −  dt2 − e2& dr 2 − e2 d 2 

(20.161)

Now imagine an observer moving with the 4-velocity U such that U r = U  = 0, i.e. def circulating within the t  surface. Define ) = U  /U t ≡ d/dt – this is the angular velocity of the observer. Imagine that she has set up mirrors all along her orbit so that light rays emitted by her source can travel around the same circle in both directions and

490

The Kerr solution

come back to her. Let the time of the round-trip of the light ray be T , with = +1 for the ray rotating forward and = −1 for the ray rotating backward with respect to the observer. The observer will during the time T move from the position 1 to the position 2 = 1 + )T . The light ray, during its round-trip, will move from 1 to 3 = 1 + )T + 2 . Along the ray ds2 = 0, so e dt = e d −  dt, and consequently dt =

e d e + e

(20.162)

Integrating this over the whole round-trip we obtain T =

)T + 2   + e−

(20.163)

Solving this for T we obtain T =

e−

2  − ) − 

(20.164)

Along the observer’s path d = ) dt, so her proper time s is related to her time coordinate by

ds2 = e2 − e2 ) − 2 dt2  (20.165) Hence, the proper time of the round-trip of the ray measured by the observer is   1 + e− ) −   S = e2 − e2 ) − 2 T ≡ 2e  (20.166) 1 − e− ) −  This time is different for the forward-sent ray and for the backward-sent ray (S1 = S−1 ), except when ) = . Since, as has been shown, in an asymptotically flat spacetime the t  coordinates of (20.161) are unique,  is uniquely determined by the geometry, so there is a uniquely determined set of observers for whom the effect of rotation, S1 − S−1 , disappears. They are called locally nonrotating observers, after Bardeen (1970). Their worldlines are orthogonal to the t = constant hypersurfaces, so their rotation tensor defined by (15.30) is zero. The quantities present in (20.161) were defined for the Kerr metric in Eqs. (20.121) and (20.126). The Kerr metric is stationary, axisymmetric and asymptotically flat, with the period of  equal to 2, so it is an example of a spacetime that allows the existence of locally nonrotating observers.

20.11 * Ellipsoidal spacetimes Together with locally non-rotating observers, one can define another set of observers in the Kerr spacetime – those for whom the locally orthogonal subspaces are composed of confocal ellipsoids of revolution. In order to define these observers, we first introduce the notion of an ellipsoidal spacetime. It is defined in analogy to the spherically symmetric spacetimes – that are

20.11 * Ellipsoidal spacetimes

491

composed of concentric spheres. The ellipsoidal spacetimes are composed of concentric ellipsoids in a similar manner.1 Consider a Euclidean space E3 with rectangular Cartesian coordinates x y z and the metric ds2 = dx2 + dy2 + dz2 . Introduce such r   coordinates that r = constant defines an ellipsoid of revolution: x = gr sin  cos 

y = gr sin  sin 

z = r cos 

They will be orthogonal when g 2 r − r 2 = constant, i.e. when  gr = r 2 + a2  a = constant

(20.167)

(20.168)

This implies that the ellipsoids corresponding to different values of r are confocal, and a is the radius of their common focal ring r = 0  = /2 . The surfaces  = constant are one-sheeted hyperboloids of revolution with their foci on the same ring. The metric in these coordinates becomes ds2 =



 r 2 + a2 cos2  2 2 dr + r + a2 cos2  d 2 + r 2 + a2 sin2  d2  r 2 + a2

(20.169)

The space with the metric (20.169) is still flat. We make it curved by assuming that grr = f 2 r  is an arbitrary function – in analogy to a curved spherically symmetric space that results when the Cartesian grr = 1 is replaced by grr = f 2 r. We now define an ellipsoidal spacetime as follows: there should exist a congruence of timelike lines in it, with the tangent vector field u = U  0 + V  3 (where x0 = t and x3 = ) such that the metric



 ds3 2 = f 2 r dr 2 + r 2 + a2 cos2  d 2 + r 2 + a2 sin2  d2

(20.170)

(20.171)

coincides with the metric of the space locally orthogonal to u , i.e. h  = g  − u u 

(20.172)

Since we intend to apply this construction to the Kerr metric, we assume that the ellipsoidal spacetime is stationary and axially symmetric, and thus has the metric (20.158). Equating (20.171) with (20.172) we obtain  2

 2 V

 2 2 2 −h  dx dx = −g11 dr − g22 d − g00 g33 − g03 U d − dt U (20.173)

2  2 2  2 2 2 2 2 2 2 = f r dr + r + a cos  d + r + a sin  d  1

In this section, we will consider confocal ellipsoids of revolution. In principle, it should be possible to generalise this construction to other types and arrangements of the ellipsoids, but so far those other possibilities have not been explored.

492

Thus

The Kerr solution

 g11 = −f 2 r  g00 g33 − g03 2 = − r 2 + a2 sin2 /U 2 

 g22 = − r 2 + a2 cos2   d = d − V/Udt

(20.174)

and from the normalisation g  u u = 1 we have g00 U 2 + 2g03 UV + g33 V 2 = 1

(20.175)

The set (20.174)–(20.175) cannot be uniquely solved for g  because we defined only the 3-dimensional projection of the metric, h  . Hence, g  will contain one arbitrary function, which we choose to be

 def (20.176) k2 = g33 + r 2 + a2 sin2  The resulting 4-dimensional metric is then 2 

 1 ∓ kV 2 dt ± k d − f 2 r dr 2 − r 2 + a2 cos2  d 2 ds = U

 − r 2 + a2 sin2  d − V/Udt2 

(20.177)

The conditions (20.174)–(20.175) define metric components, so they are coordinatedependent. Thus, the condition of ellipsoidality in fact says that coordinates should exist in which the metric obeys (20.174)–(20.175). In order to show that the Kerr metric is ellipsoidal, the Boyer–Lindquist coordinates of (20.57) have to be transformed as follows t = t + a

r   = r       

(20.178)

This transformation is of the ‘forbidden’ type (20.159) that leads to a discontinuous time coordinate. The resulting metric is     2mr 2mr cos2  dt2 + 2a 1 − dt d ds2 = 1 −      2mra2 cos4  2  2 − r + a2 sin2  d2 − dr + a2 −  !r − d 2  This is seen to coincide with (20.177) when 

k2 = a2 1 − 2mr cos4 /  V = ±k − g03 U  /g33 

(20.179)

 U 2 = r 2 + a2 /!r 

(20.180)

where the metric components refer to (20.179). The ellipsoidal spacetimes were introduced by Krasi´nski (1978) with the hope that the construction would help in the search for a perfect fluid source of the Kerr metric. It did

20.12 A Newtonian analogue of the Kerr solution

493

not (see Section 20.13), and the ellipsoidal form turned out to be rather difficult to use in calculations. So far, it has not found any practical application.

20.12 A Newtonian analogue of the Kerr solution We found in Section 12.11 that the Newtonian theory results as the c →  limit of relativity if the metric, when developed in power series with respect to 1/c2 , has the form (12.46). The corresponding expression for the Kerr metric is given in Eq. (20.47). Since the r = constant surfaces were found to be confocal ellipsoids of revolution, the Newtonian limit of the Kerr metric might be a gravitational field whose equipotential surfaces are such ellipsoids. However, the potential implied in (20.47) is not necessarily −2m/r; this may be just an approximation to it. Thus, in order to find the Newtonian potential that is constant on the surfaces of confocal ellipsoids of revolution, we have to consider the complete set of Newtonian field equations and equations of motion. In fact, an example of a source of such a potential has been known for a long time; it was found by Chasles in 1840.1 The source was a homoeoid, i.e. an ellipsoid of revolution with a uniform 2-dimensional distribution of matter over it. The equipotential surfaces are ellipsoids confocal to the source. In the spheroidal coordinates, related to the Cartesian ones by (20.167)–(20.168), the exterior potential is Ve r = −GM/a arctana/r

(20.181)

where M is the total mass of the homoeoid. (See Krasi´nski (1980) for details. The proof that the potential of the homoeoid is independent of  is tricky; hints for it may be found in Kellogg (1929).) Knowing that the potential depends only on r, it is actually quite easy to guess a continuous density distribution that will generate the same exterior potential; it is (Krasi´nski, 1980)



r  = fr/ r 2 + a2 cos2   (20.182) where fr is an arbitrary function. The total mass of the source is then  r0 fr  dr   M = 4

(20.183)

0

where r = r0 is the equation of the surface of the source. The field (20.181) may be verified to be the unique solution of the Laplace equation that depends only on r (recall that this is the spheroidal r!) and obeys the boundary conditions limr→ V = 0 and limr→ r 2 dV/dr = GM. Some properties of this source were investigated by Krasi´nski (1980) and by Ba˙za´nski, Kaczy´nska and Krasi´nski (1985). Among other things, the interior potential was found, and the equations of motion were solved to find the distribution of velocity of matter 1

This information is based on Chandrasekhar (1969) and Webster (1949); the authors had no access to the original paper by Chasles.

494

The Kerr solution

and of pressure. The equipotential surfaces are ellipsoids of the same family (confocal) also inside the source. If r < 0, then the surfaces of constant matter-density are more oblate than the equipotential surfaces; they do not coincide in any case. The pressure is not constant on the equipotential surfaces either. The focal ring of the ellipsoids, r = 0  = /2 , is in general a singularity; in order to make it nonsingular the density would have to increase with increasing r, at least in some neighbourhood of the ring. We refer the reader to Krasi´nski (1980) and Ba˙za´nski, Kaczy´nska and Krasi´nski (1985) for a more extended list of properties of this configuration. Let us only note a few curiosities here: 1. The exterior field is determined only by the mass and angular momentum of the body; it does not depend on the body’s size. 2. At a point P inside the body, the gravitational potential is determined only by the mass contained inside the equipotential ellipsoid passing through P; the matter exterior to that ellipsoid gives a zero contribution to the potential. 3. Although the configuration is rather special, in the spherically symmetric limit a → 0 it reproduces all possible spherically symmetric configurations (because of the arbitrary function fr). This Newtonian solution is reported here for a certain reason. It is fashionable in some sectors of the astronomical community to claim that relativity is just too difficult to be used, and ad-hoc simplified methods were introduced in order to mimic relativistic effects within Newtonian gravitation. One such artificial crutch is the so-called ‘pseudo-Newtonian potential’. A pseudo-Newtonian potential is a ‘potential’ pulled out of somebody’s mind without verifying whether it obeys the Laplace equation (usually it does not), for example Vr = constant/r − r0 , where r is the ordinary spherical coordinate and r0 is a constant. The orbits in such a potential are not ellipses; they display the ‘relativistic effect’, the perihelion shift, which is supposed to justify using this potential in place of the Schwarzschild solution.1 Never mind that the potential is not vacuum. The field (20.181) is an example showing that, with a little extra effort, one can have ‘relativistic effects’ in a potential that is at least a correct Newtonian vacuum potential.

20.13 A source of the Kerr field? The Kerr solution has been known for more than 40 years now, and from the very beginning its existence provoked the simple question: what material body could generate such a vacuum field around it? Several authors have tried very hard to find a model of the source, but so far without success. The most promising positive result is that of Roos (1976), who investigated the Einstein equations with a perfect fluid or an anisotropic non-dissipating fluid source, with the boundary condition that the Kerr metric is matched 1

It has been known since time immemorial that any non-Coulombian spherically symmetric potential has the same property.

20.14 Exercises

495

to the solution. Roos’ result was that the equations form an integrable set. All attempts so far to find an explicit example of a solution have failed.1 The sources known are all rather artificial (see Krasi´nski (1978) for references): a 2-dimensional disc spanned on the singular ring of the Kerr metric; a body with anisotropic stresses, sometimes enveloped in a crust of another kind of anisotropic matter. The continuing lack of success prompted some authors to spread the suspicion that a perfect fluid source might not exist; rumours about this suspicion were then taken as a serious suggestion. The opinion of one of the present authors (A. K.) is that a bright new idea is needed, as opposed to routine standard tricks tested so far. Simply having a look at the Newtonian models that, even in the apparently simple cases of homogeneous density distribution, can be very difficult (see Chandrasekhar (1969), for example) allows one to realise that the corresponding problem in relativity must be at least as difficult.

20.14 Exercises 1. Prove that the Schwarzschild solution has the property (20.1). 2. Prove that the vector field l in (20.1) is null with respect to g if and only if it is null with def

3.

4. 5.

6. 7.

8.

9.

10. 1

respect to  . Prove then that l = g  l ≡  l and verify that (20.2) holds. Verify Eqs. (20.3) and (20.4). Note. verifying (20.4) is rather laborious; it requires using the definition of the covariant derivative and observing that a symmetric tensor doubly contracted with an antisymmetric one gives zero identically. Verify Eq. (20.12) (it is rather laborious and requires multiple changes of names of indices in order to detect simplifications). Verify that Eqs. (20.16) and (20.18) are consistent with each other and do admit nonzero Y s. Hint. Solve (20.16) and (20.18) for Y and Y , and then check the integrability condition Y = Y . Verify Eqs. (20.25) and (20.26). Prove that the assumption Z = 0 in (20.19) implies that Y and Y in (20.15) obey dY ∧ dY = 0⇐⇒ Y Y  = 0. Hint. Assume that Y Y  = 0, which implies Y  = Y , where  is a function, then write out explicitly the invariance equations (20.16) and the definition of Z, Eq. (20.19). It will follow that Z = 0. Verify that the functions Y , Y , Z and Z obey (20.34). Hint. To prove that Y obeys (20.34), solve k Y = 0 = m Y for Y and Y , then find Yv from Z = YYu −Y and substitute for Yu from (20.31). To prove (20.34) for Z note that the directional derivatives along  and along m commute, and use the result that  Y  = 0. Verify that if x, y and z are interpreted as Cartesian coordinates, then the surfaces r = constant defined by (20.43) are confocal ellipsoids of revolution. Since they are axially symmetric, the foci of cross-sections through the axis all lie on a circle. Verify that the radius of that circle is a and that 2r is the smallest diameter of the ellipsoid r = constant. Verify, by any method, that the Kerr metric is of Petrov type D.

See Krasi´nski (1978) for a systematic overview of the attempts prior to 1976; all the later attempts can be classified according to the same scheme and none has moved the matter forward.

496

The Kerr solution

11. Prove that with a2 < m2 and a sufficiently large value of Lz , there exists a range r1  r2 , with r+ ≤ r1 < r2 , such that Emin r/0 > 1 for r1 < r < r2 and Emin r/0 < 1 for r > r2 in (20.123). Hint. Substitute (20.123) in the inequality Emin r/0 > 1 and simplify. Note that r 2 !r − 4a2 m2 = r − 2mD. You will see that, if Lz 2 is large enough, then the discriminant of the resulting square trinomial in r is positive, hence Emin r/0 > 1 for r1 < r < r2 , with ⎡ ⎤    2  4  1 ⎣ Lz 2 Lz L z r12 = ∓ − 16m2 −a ⎦ 4m 0 0 0 and Emin r/0 < 1 for r > r2 . Then verify that r1 ≥ r+ for any Lz . def

 12. Prove that the function Fr = Emin / Lz  defined in (20.128) has only one maximum and no minima in the range r ∈ r+  .   Hint. One method to do it is as follows: 1. Note that F = 1 − 2m/r/ !r ∓ 2am . Note also that F = 0 at r = 2m with the lower sign because the denominator vanishes there, too, and the limit of the whole expression is finite. This remark applies also to the derivatives of F . 2. Calculate dF/dr, equate it to zero, and observe that it is + at r = r+ and goes to zero from below as r →  . Hence it has at least one zero in the range  r∈ r+  . The derivative has the form !r + (polynomial in r = 0. 3. Solve this for !r and square the result. The resulting fifth order equation looks bad, but it factorises and becomes

 def r − 2m2 r 3 − 6mr 2 + 9m2 r − 4ma2 =r − 2m2 Hr = 0. (The r = 2m is not a zero of the derivative: with the minus sign, the limit of F  r at r → 2m is finite; with the plus sign, F  r has a nonzero value there.) 4. Observe that Hr has in fact two zeros in the range r ∈ r+  ; however, only one of them is also a zero of F  r. This is done as follows: Hr is positive at r = r+ and at r = 4m, but negative at its minimum at r = 3m. Thus one of its zeros is in r+  3m and the other in 3m 4m. Now, with the minus sign, F  r changes sign an odd number of times in r+  3m, but an even number of times in 3m 4m, hence the second zero of H is not a zero of F  . With the plus sign, the opposite is true: F  r changes sign an even number of times in r+  3m, but an odd number of times in 3m 4m, so the first zero of H is not a zero of F  . Consequently, F  has only one zero in r+  . That this corresponds to a maximum of F follows from point 2 above: F is increasing in the neighbourhood of r = r+ and decreasing as r → . 13. Draw graphs analogous to Fig. 20.12 for the cases  > 0 and  = 0 (preferably by using a good plotting program). 14. Prove that (r > 0 in (20.155) for all r ≥ r+ . Hint. Note that if fr0  > 0 and df/dr > 0 for all r > r0 , then fr > 0 for all r > r0 . Write the condition (r > 0, multiply this inequality by whatever is necessary to obtain an inequality Pr > 0, where Pr is a polynomial, then differentiate Pr repeatedly until you find out that one of the derivatives is seen to have the property fr > 0 for all r ≥ r+ . Then use the observation to deduce the same about all the lower-order derivatives. 15. Prove that for the locally non-rotating observers defined in Section 20.10 the rotation tensor is zero and that the worldlines of these observers are orthogonal to the r = constant hypersurfaces. 16. Find the equations of the light cones in Fig. 20.6. Hint. The metric of the subspace  = /2 in (20.57) is     2ma2 2m 4ma r2 ds2 = 1 − dt2 + dt d − + r 2 + a2 d2 − dr 2  r r r !r

20.14 Exercises

497

the B–L coordinates r  The equation of the light cones is ds2 = 0. The relation between √ √ 2 + a2 sin . and the X Y spatial coordinates in the figure is X = r 2 + a2 cos , Y = r √  The cones are drawn at the points of the plane  = 0, where dr = r 2 + a2 /r dX and √ d = dY/ r 2 + a2 . Thus the equation of a cone with vertex at T X Y = 0 0 X0  is     4ma 2ma2 2m T2 + √ TY − 1− + 1 Y2 r r r 2 + a2  r r 2 + a2 −

r 2 + a2 X − X0 2 = 0 !r

(20.184)

The vertical axis in the figure is T , the X Y axes are as shown. The equations for drawing the graphs are obtained by solving the above for T or for X, but a few special cases must be treated separately. The limit r = 2m (the outer stationary limit hypersurface) in the above equation is nonsingular. Before taking the limits r → r± , the equation must be multiplied by !r . These limits are discontinuous, as described at the end of Section 20.5. On approaching r = r± from inside the segment r−  r+ , the equation becomes X = X0 r± , which is a vertical plane. On approaching these values from outside that segment, the equation becomes singular, but by calculating the curves along which the cones intersect with a T = constant plane one finds that they are ellipses whose both axes shrink to a point, while the ellipses themselves recede to Y → − as r → r± . Before taking the limit r → 0, the equation must be multiplied by r; in the limit it becomes −2m T − a/aY 2 = 0, which is one of the straight lines T = Y (when a > 0) or T = −Y (when a < 0, the case shown in the figure).

21 Subjects omitted from this book

As stated in the introduction, it would not be possible to include the whole of relativity in a book of manageable size. We chose to go into several selected topics in depth, but omitted some other topics completely or nearly so. This short chapter is a list of the topics we omitted, with some suggestions to the reader for further reading. The following topics were covered inadequately or not at all: 1. Gravitational waves. Speaking most generally, a gravitational wave is any gravitational field that propagates through space independently of matter. It may, but need not, be periodic. There exists a large collection of exact solutions of Einstein’s equations describing waves, for these see Stephani et al. (2003). There exists also an elaborate theory of nearly-linear waves, a relatively good source for it is the book by Ohanian and Ruffini (1994), and also the classic MTW course (Misner, Thorne and Wheeler, 1973). The theory of generation and detection of gravitational waves is worked out rather well, but progress in it is still going on, so current knowledge can be gained only from papers. A sophisticated and elaborate experimental technology is already in place, but to keep up with this one has to attend conferences in addition to reading the literature. The pioneer of the search for gravitational waves was Weber (1961); his small book can be recommended to readers interested in the history of the subject. 2. The Cauchy problem. In each coordinate system, the set of Einstein’s equations can be separated into those equations that contain at most the first-order time derivatives of the metric components and those that are of second order in time. The former are limitations imposed on the initial data, the latter are the dynamical evolution equations. This approach makes it possible to discuss such problems as the global existence or nonexistence of solutions of Einstein’s equations, horizons in general spacetimes and general principles of propagation of gravitational waves. The pioneering paper in this field was that by Arnowitt, Deser and Misner (1962), which gave the name ADM to the whole approach. Misner, Thorne and Wheeler (1973) and Joshi (1993) are also good sources for this topic, and Hawking and Ellis (1973) make elaborate use of it. 3. Generating new stationary–axisymmetric solutions out of known solutions. This is a very large field of activity. We saw in Section 20.2 that the Kerr solution resulted from the Einstein equations in consequence of a set of assumptions, not all of which 498

Subjects omitted from this book

499

had a clear interpretation. By changing these assumptions one can obtain other solutions. The first important step in this direction was made by Ernst (1968a), who reduced the Einstein equations for stationary–axisymmetric vacuum spacetimes to one equation for one complex function, now called the Ernst potential (in a subsequent paper, this approach was extended to the Einstein–Maxwell equations (Ernst, 1968b)). Then it was discovered that these equations admit transformations of variables that lead from one solution to another, with a geometry that is not a coordinate transform of the initial one. On the basis of this finding, several generating techniques for obtaining new solutions were introduced. Meanwhile, the most famous among the next-generation stationary–axisymmetric metrics, the Tomimatsu–Sato (1972) solution, was found. An overview of the generating techniques can be found in Stephani et al. (2003); a more extended overview is the recent book by Belinskii and Verdaguer (2001). 4. The Penrose transform. We mentioned this approach when discussing the maximal analytic extensions of the Reissner–Nordström spacetime in Section 14.15, and of the Kerr metric in Section 20.8. More on it can be found in the books by Misner, Thorne and Wheeler (1973) and by Hawking and Ellis (1973). The main advantage of this approach is that it maps points at infinity into finite points of another manifold, which in turn allows one to discuss values of functions instead of limits. This is a powerful tool, even though few spacetimes are known for which the Penrose transform has been constructed explicitly. 5. Cosmic censorship. We mentioned this subject in Section 18.16, but our brief account does not fairly represent the activity behind it. This is a lively paradigm, on which perhaps the best source is the book by Joshi (1993). 6. Experimental tests. Apart from the very few classical and most basic tests, we did not really do justice to this subject. This is now a science in itself, with large groups of physicists involved in projects lasting many years. Apparently, there exists no up-to-date book on it. As a historical introduction to the subject, the old volume of proceedings of the Fermi school from 1972 can be recommended (Bertotti, 1974); a discussion of results and their meaning for the theory can be found in the book by Will (1981). 7. Spinor methods. Our Chapter 11 is a very concise introduction to this subject, but spinors can do much more than we described there. Fortunately, a large monograph (Penrose and Rindler, 1984) is available. 8. Relativistic astrophysics. We did not give a fair representation of the classical applications of relativity to astrophysics because we concentrated on the conceptual basis of relativity. The most extended course on this subject is still the two volumes by Zel’dovich and Novikov (1971, 1974); briefer accounts can be found in Misner, Thorne and Wheeler (1973) and Weinberg (1972). 9. The history of relativity. This subject is treated rather superficially in most textbooks, and ours is no exception. That history is important and can be exciting is best attested

500

Subjects omitted from this book

by the classic book by Pais (1982) – a detailed account of Einstein’s life and scientific activities. Other important sources are the book by Mehra (1974) that explains how relativity had been taking shape step by step, and the collection of original papers in which special and general relativity were created (Einstein et al., 1923). Some important bits of history can be found in the monograph by Dicke (1964). 10. Special relativity. We omitted this subject altogether because we assumed that special relativity is now part of all courses on electrodynamics and should be familiar to anyone setting out to study general relativity. Should any reader need to learn, we recommend the following sources: Synge’s (1965) book is an expert-level complete textbook. The book by Kopczy´nski and Trautman (1992) is only in a small part devoted to special relativity, but it presents an enlightening geometric approach that simplifies many problems. Equally enlightening is the textbook by Rindler (1980). Finally, special relativity in the context of electrodynamics is presented in a readable way by Jackson (1975).

References

Allen, C. W. (1973). Astrophysical Quantities. London, The Athlone Press. [181] Alpher, R. A. and Herman, R. C. (1948). Evolution of the Universe, Nature 162, 774. [288] Appelquist, T. and Chodos, A. (1983). Quantum effects in Kaluza–Klein theories, Phys. Rev. Lett. 50, 141. [164] Arnau, J. V., Fullana, M., Monreal, L. and Saez, D. (1993). On the microwave background anisotropies produced by nonlinear voids, Astrophys. J. 402, 359. [330, 331] Arnau, J. V., Fullana, M. and Saez, D. (1994). Great attractor-like structures and largescale anisotropy, Mon. Not. Roy. Astr. Soc. 268, L17. [330, 331] Arnowitt, R., Deser, S. and Misner, C. W. (1962). The dynamics of general relativity, in Gravitation: An Introduction to Current Research. Edited by L. Witten. New York: Wiley Interscience. [498] Bardeen, J. M. (1970). A variational principle for rotating stars in general relativity, Astrophys. J. 162, 71. [489, 490] Bardeen, J. M. (1973). Timelike and null geodesics in the Kerr metric, in: Black Holes – les astres occlus. Edited by C. de Witt and B. S. de Witt. New York, London, Paris: Gordon and Breach, pp. 219–239. [466] Barnes, A. (1970). On gravitational collapse against a cosmological background, J. Phys. A3, 653. [313, 325] Barnes, A. (1973). On shearfree normal flows of a perfect fluid, Gen. Rel. Grav. 4, 105. [230] Barnes, A. (1984). Shear-free flows of a perfect fluid, in Classical General Relativity. Edited by W. B. Bonnor, J. N. Islam and M. A. H. MacCallum. Cambridge: Cambridge University Press, pp. 15–23. [70] Barnes, A. and Rowlingson, R. R. (1989). Irrotational perfect fluids with a purely electric Weyl tensor, Class. Quant. Grav. 6, 949. [396, 398] Barrow, J. D. and Silk, J. (1981). The growth of anisotropic structures in a Friedmann Universe, Astrophys. J. 250, 432. [400] Barrow, J. D. and Stein-Schabes, J. A. (1984). Inhomogeneous cosmologies with cosmological constant, Phys. Lett. A103, 315. [392, 400, 401] Ba˙za´nski, S., Kaczy´nska, R. and Krasi´nski, A. (1985). Physical properties of the extended Chasles equilibrium figure, Phys. Lett. A115, 33. [493, 494] Belinskii, V. and Verdaguer, E. (2001). Gravitational Solitons. Cambridge: Cambridge University Press. [499] Berger, B. K., Eardley, D. M. and Olson, D. W. (1977). Note on the spacetimes of Szekeres, Phys. Rev. D16, 3086. [397] Bergmann, P. G. (1968). Comments on the scalar–tensor theory, Int. J. Theor. Phys. 1, 25. [150] 501

502

References

Bertotti, B. (1959). Uniform electromagnetic field in the theory of general relativity, Phys. Rev. 116, 1331. [171] Bertotti, B. (editor) (1974). Experimental Gravitation. Proceedings of the International School of Physics ‘Enrico Fermi’, Course 56. New York and London: Academic Press. [499] Bianchi, L. (1898). Sugli spazi a tre dimensioni che ammettono un gruppo continuo di movimenti [On the three-dimensional spaces which admit a continuous group of motions], Memorie di Matematica e di Fisica della Società Italiana delle Scienze 11, 267. English translation, with historical comments: Gen. Rel. Grav. 33, 2171 (2002). [99, 101] Boesgaard, A. M. and Steigman, G. (1985). Big bang nucleosynthesis – theories and observations, Ann. Rev. Astron. Astrophys. 23, 319. [288] Bona, C. and Coll, B. (1985). On the Stephani Universe, C. R. Acad. Sci. Paris 301, 613. [233] Bona, C. and Coll, B.(1988). On the Stephani Universes, Gen. Rel. Grav. 20, 297. [233] Bondi, H. (1947). Spherically symmetrical models in general relativity Mon. Not. Roy. Astr. Soc. 107, 410; reprinted, with historical comments, in Gen. Rel. Grav. 31, 1777 (1999). [297, 298, 313, 316, 328] Bonnor, W. B. (1956). The formation of the nebulae, Z. Astrophysik 39, 143; reprinted, with historical comments, in Gen. Rel. Grav. 30, 1111 (1998). [303, 353] Bonnor, W. B. (1976a). Non-radiative solutions of Einstein’s equations for dust, Commun. Math. Phys. 51, 191. [401] Bonnor, W. B. (1976b). Do freely falling bodies radiate? Nature 263, 301. [401] Bonnor, W. B. (1985). An open recollapsing cosmological model with  = 0, Mon. Not. Roy. Astr. Soc. 217, 597. [317] Bonnor, W. B., Sulaiman, A. H. and Tomimura, N. (1977). Szekeres’s space-times have no Killing vectors, Gen. Rel. Grav. 8, 549. [392, 436] Bonnor, W. B. and Tomimura, N. (1976). Evolution of Szekeres’s cosmological models, Mon. Not. Roy. Astr. Soc. 175, 85. [400] Boyer, R. H. and Lindquist, R. W. (1967). Maximal analytic extension of the Kerr metric, J. Math. Phys. 8, 265. [438, 449, 452, 466, 475, 477, 484] Brans, C. and Dicke, R. H. (1961). Mach’s principle and a relativistic theory of gravitation, Phys. Rev. 124, 925. [149] Bronnikov, K. A. (1983). Some exact models of nonspherical collapse. II, Gen. Rel. Grav. 15, 823. [372] Bronnikov, K. A. and Pavlov, N. V. (1979). Relyativistskiye raspredeleniya zaryazhenoy pyli s ploskoy, sfericheskoy i psevdosfericheskoy simmetriyami [Relativistic distributions of charged dust with flat, spherical and pseudospherical symmetries], in: Diskusyonnye voprosy teorii otnositelnosti i gravitatsii [Controversial Questions of the Theory of Relativity and Gravitation]. Moscow: Nauka, p. 59. [369, 374] Cahen, M. and Defrise, L. (1968). Lorentzian 4-dimensional manifolds with ‘local isotropy’, Commun. Math. Phys. 11, 56. [175] Canuto, V., Adams, P. J., Hsieh, S.-H. and Tsiang, E. (1977). Scale-covariant theory of gravitation and astrophysical applications, Phys. Rev. D16, 1643. [150] Carter, B. (1966a). The complete analytic extension of the Reissner–Nordström metric in the special case e2 = m2 , Phys. Lett. 21, 423. [212, 216] Carter, B. (1966b). Complete analytic extension of the symmetry axis of Kerr’s solution of Einstein’s equations, Phys. Rev. 141, 1242. [475] Carter, B. (1968a). Hamilton–Jacobi and Schrödinger separable solutions of Einstein’s equations, Commun. Math. Phys. 10, 280. [453, 459]

References

503

Carter, B. (1968b). Global structure of the Kerr family of gravitational fields, Phys. Rev. 174, 1559. [475] Carter, B. (1973). Black hole equilibrium states. Part I: Analytic and geometric properties of the Kerr solutions, in: Black Holes – les astres occlus. Edited by C. de Witt and B. S. de Witt. New York, London, Paris: Gordon and Breach, p. 61. [212, 216, 438, 451, 452, 454, 458, 464, 475, 486] Celerier, M. N. (2000). Do we really see a cosmological constant in the supernovae data?, Astron. Astrophys. 353, 63. [287] Celerier, M. N. and Schneider, J. (1998). A solution to the horizon problem: a delayed big bang singularity, Phys. Lett. A249, 37. [347] Celerier, M. N. and Szekeres, P. (2002). Timelike and null focusing singularities in spherical symmetry: A solution to the cosmological horizon problem and a challenge to the cosmic censorship hypothesis, Phys. Rev. D 65, 123516. [347] Chandrasekhar, S. (1969). Ellipsoidal Figures of Equilibrium. New Haven and London: Yale University Press, p. 46. [493, 495] Christodoulou, D. (1984). Violation of cosmic censorship in the gravitational collapse of a dust cloud, Commun. Math. Phys. 93, 171. [333, 336, 343, 346] Clarke, C. J. S. (1993). A review of cosmic censorship, Class. Quant. Grav. 10, 1375. [346] Clarke, C. J. S. and O’Donnell, N. (1992). Dynamical extension through a space-time singularity, Rendiconti del Seminario Matematico della Università e Politecnico di Torino 50(1), 39. [338] Coles P. and Ellis, G. F. R. (1997). Is the Universe Open or Closed? The density of matter in the Universe. Cambridge: Cambridge University Press. [268, 286] Coll, B. and Ferrando, J. J. (1989). Thermodynamic perfect fluid. Its Rainich theory, J. Math. Phys. 30, 2918. [233] Collins, C. B. (1979). Intrinsic symmetries in general relativity, Gen. Rel. Grav. 10, 925. [105] Collins, C. B. and Ellis, G. F. R. (1979). Singularities in Bianchi cosmologies, Phys. Rep. 56 no 2, 65. [105] Collins, C. B. and Szafron, D. A. (1979). A new approach to inhomogeneous cosmologies: intrinsic symmetries. I, J. Math. Phys. 20, 2347. [397] Collins, C. B. and Wainwright, J. (1983). On the role of shear in general relativistic cosmological and stellar models, Phys. Rev. D27, 1209. [105] Courant, R. and Hilbert, D. (1965). Methods of Mathematical Physics, vol. II: Partial Differential Equations. New York: Wiley Interscience. [445] Datt, B. (1938). Über eine Klasse von Lösungen der Gravitationsgleichungen der Relativität [On a class of solutions of the gravitation equations of relativity], Z. Physik 108, 314; English translation, with historical comments: Gen. Rel. Grav. 31, 1615 (1999). [110, 385] Dautcourt, G. (1980). The cosmological problem as initial value problem on the observer’s past light cone, in: 9th International Conference on General Relativity and Gravitation, University of Jena, p. 315. [363] Dautcourt, G. (1983a). The cosmological problem as initial value problem on the observer’s past light cone: observations, Astron. Nachr. 304, 153. [363] Dautcourt, G. (1983b). The cosmological problem as initial value problem on the observer’s past light cone: geometry, J. Phys. A16, 3507. [363] Dautcourt, G. (1985). Observer dependence of past light cone initial data in cosmology, Astron. Nachr. 306, 1. [363]

504

References

de Sitter, W. (1916). On Einstein’s theory of gravitation and its astronomical consequences. Second paper, Mon. Not. Roy. Astr. Soc. 77, 155 (1916–17). [175] de Sitter, W. (1917). On Einstein’s theory of gravitation and its astronomical consequences. Third paper, Mon. Not. Roy. Astr. Soc. 78, 3. [93] de Souza, M. M. (1985). Hidden symmetries of Szekeres quasi-spherical solutions, Revista Brasileira de Física 15, 379. [419] Debever, R. (1959). Sur le tenseur de super-énergie [On the super-energy tensor], C. R. Acad. Sci. Paris 249, 1324; Tenseur de super-énergie, tenseur de Riemann: cas singuliers [The super-energy tensor, the Riemann tensor: the singular cases], C. R. Acad. Sci Paris 249, 1744. [70, 122] Debever, R. (1964). Le rayonnement gravitationnel: le tenseur de Riemann en relativité génerale [Gravitational radiation: the Riemann tensor in general relativity], Cahiers Phys. 18, 303. [122] Debever, R., Kamran N. and McLenaghan, R. G. (1983). A single expression for the general solution of Einstein’s vacuum and electrovac field equations with cosmological constant for Petrov type D admitting a nonsingular aligned Maxwell field, Phys. Lett. 93A, 399; also reported in 10th International Conference on General Relativity and Gravitation, Padova 1983 – contributed papers. Edited by B. Bertotti, F. de Felice and A. Pascolini. Rome: Consiglio Nazionale delle Ricerche, pp. 216–218. [458] Debever, R., Kamran, N. and McLenaghan, R. G. (1984). Exhaustive integration and a single expression for the general solution of the type D vacuum and electrovac field equations with cosmological constant for a nonsingular aligned Maxwell field, J. Math. Phys. 25, 1955. [458] Debney, G. C., Kerr, R. P. and Schild, A. (1969). Solutions of the Einstein and Einstein– Maxwell equations, J. Math. Phys. 10, 1842. [441,444] Deshingkar, S. S., Joshi, P. S. and Dwivedi, I. H. (1999). Physical nature of the central singularity in spherical collapse, Phys. Rev. D59, 044018. [346] Dicke, R. H. (1964), The Theoretical Significance of Experimental Relativity. New York: Gordon and Breach. [3, 149, 182, 500] Dicke, R. H., Peebles, P. J. E., Roll, P. G. and Wilkinson, D. T. (1965). Cosmic black-body radiation, Astrophys. J. 142, 414. [288] Droste, J. (1917). The field of a single centre in Einstein’s theory of gravitation, and the motion of a particle in that field, Koninklijke Nederlandsche Akademie van Wetenschappen Proceedings 19, 197; reprinted, with historical comments, in Gen. Rel. Grav. 34, 1545 (2002). [175] Dwivedi, I. H. and Joshi, P. S. (1992). Cosmic censorship violation in non-self-similar Tolman–Bondi models, Class. Quant. Grav. 9, L69. [346] Dyer, C. C. (1979). A spherically symmetric self-similar universe, Mon. Not. Roy. Astr. Soc. 189, 189. [344, 345] Dyson, F. W., Eddington, A. S. and Davidson, C. (1920). A determination of the deflection of light by the Sun’s gravitational field, from observations made at the total eclipse of May 29, 1919, Phil. Trans. Roy. Soc. London A220, 291; cited after Will (1981, p. 5). [186] Eardley, D. M. (1974a). Self-similar spacetimes: geometry and dynamics, Commun. Math. Phys. 37, 287. [105] Eardley, D. M. (1974b). Death of white holes in the early Universe, Phys. Rev. Lett. 33, 442. [344] Eardley, D. M. and Smarr, L. (1979). Time functions in numerical relativity: Marginally bound dust collapse, Phys. Rev. D19, 2239. [333, 344, 346]

References

505

Ehlers, J. (1961). Beiträge zur relativistischen Mechanik kontinuierlicher Medien [Contributions to the relativistic mechanics of continuous media], Abhandlungen der Mathematisch-Naturwissenschaftlichen Klasse der Akademie der Wissenschaften und Literatur Mainz, No 11; English translation: Gen. Rel. Grav. 25, 1225 (1993). [227, 229] Ehlers, J., and Kundt, W. (1962). Exact solutions of the gravitational field equations, in Gravitation, an introduction to current research. Edited by L. Witten. New York: Wiley Interscience, pp. 49–101. [70, 119] Einstein, A. (1916). Die Grundlage der allgemeinen Relativitätstheorie [The foundation of the general theory of relativity], Ann. Physik 49, 769; English translation: Einstein et al. (1923, pp. 109–164). [125] Einstein, A. (1925). Einheitliche Feldtheorie von Gravitation und Elektrizität [Unified field theory of gravitation and electricity], Sitzungsberichte Preuss. Akad. Wiss. p. 414. [136] Einstein, A., Lorentz, H. A., Weyl, H. and Minkowski, H. (1923). The Principle of Relativity. A Collection of Original Papers on the Special and General Theory of Relativity. Dover Publications. [4, 132, 500] Einstein, A. and Straus, E. G. (1945). The influence of the expansion of space on the gravitation fields surrounding the individual stars, Rev. Mod. Phys. 17, 120 (1945); Corrections and additional remarks to our paper: The influence of the expansion of space on the gravitation fields surrounding the individual stars, Rev. Mod. Phys. 18, 148 (1946). [309] Eisenhart, L. P. (1940). An Introduction to Differential Geometry with Use of Tensor Calculus. Princeton: Princeton University Press. [48, 54] Eisenhart, L. P. (1964). Riemannian Geometry. Princeton University Press: Princeton. [48, 63] Ellis, G. F. R. (1967). Dynamics of pressure-free matter in general relativity, J. Math. Phys. 8, 1171. [369, 374] Ellis, G. F. R. (1971). Relativistic cosmology, in: Proceedings of the International School of Physics ‘Enrico Fermi’, Course 47: General Relativity and Cosmology. Edited by R. K. Sachs. New York and London: Academic Press, pp. 104–182. [228, 229, 237, 253, 255, 259] Ellis, G. F. R. (1973). Relativistic cosmology, in: Cargèse Lectures in Physics, vol. 6. Edited by E. Schatzman. New York: Gordon and Breach, p. 1. [231, 237] Ellis, G. F. R., Hellaby, C. and Matravers, D. R. (1990). Density waves in cosmology. Astrophys. J. 364, 400. [366] Ellis, G. F. R. and MacCallum, M. A. H. (1969). A class of homogeneous cosmological models, Commun. Math. Phys. 12, 108. [99, 112] Ernst, F. J. (1968a). New formulation of the axially symmetric gravitational field problem, Phys. Rev. 167, 1175. [499] Ernst, F. J. (1968b). New formulation of the axially symmetric gravitational field problem II, Phys. Rev. 168, 1415. [499] Estabrook, F. B., Wahlquist, H. D. and Behr, C. G. (1968). Dyadic analysis of spatially homogeneous world models, J. Math. Phys. 9, 497. [99] Etherington, I. M. H. (1933). On the definition of distance in general relativity. Phil. Mag., ser. 7 15, 761. [253, 255] Ferraris, M., Francaviglia, M. and Reina, C. (1982). Variational formulation of general relativity from 1915 to 1925 ‘Palatini’s method’ discovered by Einstein in 1925, Gen. Rel. Grav. 14, 243. [136]

506

References

Finkelstein, D. (1958). Past–future asymmetry of the gravitational field of a point particle, Phys. Rev. 110, 965. [191] Flanders, H. (1963). Differential Forms with Applications to Physical Sciences. New York and London: Academic Press. [294] Fomalont, E. B. and Sramek, R. (1975). A confirmation of Einstein’s general theory of relativity by measuring the bending of microwave radiation in the gravitational field of the Sun, Astrophys. J. 199, 749 (1975); Measurements of the solar gravitational deflection of radio waves in agreement with general relativity, Phys. Rev. Lett. 36, 1475 (1976); The deflection of radio waves by the Sun, Comments Astrophys. 7, 19 (1977). [188] Fowler, W. A. (1967). Nuclear Astrophysics. Philadelphia: American Philosophical Society. [288] Foyster, J. M. and McIntosh, C. B. G. (1972). A class of solutions of Einstein’s equations which admit a 3-parameter group of isometries, Commun. Math. Phys. 27, 241. [171] Friedmann, A. A. (1922). Über die Krümmung des Raumes [On the curvature of space], Z. Physik 10, 377 (1922); Über die Möglichkeit einer Welt mit konstanter negativer Krümmung des Raumes [On the possibility of a world with constant negative curvature of space], Z. Physik 21, 326 (1924); English translation of both papers with historical comments: Gen. Rel. Grav. 31, 1985 (1999); + addendum: Gen. Rel. Grav. 32, 1937 (2000). [111, 236, 262, 267, 276, 287] Frolov, V. P. (1974). Resheniya tipa Kerra – Nyumana – Unti – Tamburino uravneniy Eynshteina s kosmologicheskim chlenom [Solutions of Einstein’s equations of the Kerr – Newman – Unti – Tamburino type with the cosmological term], Teor. Mat. Fiz. 21, 213; English translation: Theor. Math. Phys. 21, 1088 (1974). [458] Frolov, V. P. and Novikov, I. D. (1998). Black Hole Physics: Basic Concepts & New Developments. Amsterdam: Kluwer, 770 pp. [201] Fronsdal, C. (1959). Completion and embedding of the Schwarzschild solution, Phys. Rev. 116, 778. [197] Gamow, G. (1948). The evolution of the Universe, Nature 162, 680. [288] Gautreau, R. (1984). Imbedding a Schwarzschild mass into cosmology, Phys. Rev. D29, 198. [300, 310] Gödel, K. (1949). An example of a new type of cosmological solutions of Einstein’s field equations of gravitation, Rev. Mod. Phys. 21, 447; reprinted, with historical comments, in Gen. Rel. Grav. 32, 1409 (2000). [99] Goldberg, J. and Sachs, R. K. (1962). A theorem on Petrov types, Acta Phys. Polon 22 (supplement), 13. [253] Goode, S. W. and Wainwright, J. (1982). Singularities and evolution of the Szekeres cosmological models, Phys. Rev. D26, 3315. [421] Gorini, V., Grillo, G. and Pelizza, M. (1989). Cosmic censorship and Tolman–Bondi spacetimes, Phys. Lett. A135, 154. [344] Graves, J. C. and Brill, D. R. (1960). Oscillatory character of Reissner–Nordström metric for an ideal charged wormhole, Phys. Rev. 120, 1507. [194, 207, 212, 217] Gravity Probe B mission update (2004). http://einstein.stanford.edu/. [160] Gregory S. A. and Thompson L. A. (1978). The Coma/A1367 supercluster and its environs, Astrophys. J. 222, 784. [301] Grillo, G. (1991). On a class of naked strong-curvature singularities, Class. Quant. Grav. 8, 739. [344] Grishchuk, L. P. (1967). Cosmological models and spatial homogeneity criteria, Astron. Zh. 44, 1097; English translation: Sov. Astron. A. J. 11, 881 (1968). [112]

References

507

Guth, A. H. (1981). Inflationary Universe: a possible solution to the horizon and flatness problems. Phys. Rev. D23, 347. [282, 284, 285] Haantjes, J. (1937). Conformal representations of an n-dimensional euclidean space with a non-definite fundamental form on itself, Koninklijke Nederlandsche Akademie van Wetenschappen Proceedings 40, 700 (1937); Die Gleichberechtigung gleichförmig beschleunigter Beobachter für die elektromagnetischen Erscheinungen [Equivalence of uniformly accelerated observers with respect to electromagnetic phenomena], Koninklijke Nederlandsche Akademie van Wetenschappen Proceedings 43, 1288 (1940). [92] Harness, R. S. (1982). Space-times homogeneous on a time-like hypersurface, J. Phys. A15, 135. [105] Hawking, S. W. and Ellis, G. F. R. (1973). The Large-scale Structure of Spacetime. Cambridge: Cambridge University Press. [231, 498, 499] Hellaby, C. (1987). A Kruskal-like model with finite density, Class. Quant. Grav. 4, 635. [325, 357, 359] Hellaby, C. (1996a). The nonsimultaneous nature of the Schwarzschild R = 0 singularity, J. Math. Phys. 37, 2892. [321] Hellaby, C. (1996b). The null and KS limits of the Szekeres model, Class. Quant. Grav. 13, 2537. [402] Hellaby, C. and Krasi´nski, A. (2002). You cannot get through Szekeres wormholes or regularity, topology and causality in quasi-spherical Szekeres models, Phys. Rev. D66, 084011. [325, 403, 411, 418] Hellaby, C. and Lake, K. (1984). The redshift structure of the Big Bang in inhomogeneous cosmological models. I. Spherical dust solutions, Astrophys. J. 282, 1; + erratum Astrophys. J. 294, 702 (1985). [337] Hellaby, C. and Lake, K. (1985). Shell crossings an the Tolman model, Astrophys. J. 290, 381 + erratum Astrophys. J. 300, 461 (1986). [296, 317, 324, 354] Hellaby, C. and Lake, K. (1988). The singularity of Eardley, Smarr and Christodoulou. Preprint 88/7, Cape Town: Institute of Theoretical Physics and Astrophysics, University of Cape Town. [333] Hu, W. (2004). webpage: http://background.uchicago.edu/whu/physics/tourpage.html [290] ˜ Hubble, E. P. (1929). A relation between distance and radial velocity among extragalactic nebulae, Proc. Nat. Acad. Sci. USA 15, 169. [145, 262, 287] Hubble, E. P. (1936). The Realm of the Nebulae (New Haven: Yale University Press, 1982), 207 (Republication; First published 1936). [262, 287] Hubble, E. P. (1953). The law of the redshifts, Mon. Not. Roy. Astr. Soc. 113, 658. [145, 262] Jackson, J. D. (1975). Classical Electrodynamics. Second edition. New York: J. Wiley & Sons, Inc. [500] Jantzen, R. (2001). Editor’s note: On the three-dimensional spaces which admit a continuous group of motions, Gen. Rel. Grav. 33, 2157. [99] Joshi, P. S. (1993). Global Aspects in Gravitation and Cosmology. Oxford: Clarendon Press. [324, 341, 346, 498, 499] Joshi, P. S. and Dwivedi, I. H. (1993). Naked singularities in spherically symmetric inhomogeneous Tolman–Bondi dust cloud collapse, Phys. Rev. D47, 5357. [346] Kaluza, T. (1921). Zum Unitätsproblem der Physik [On the problem of unity of physics], Sitzungsber. Preuss. Akad. Wiss. Berlin, Math. Phys. Kl. p. 966. [164] Kantowski, R. (1965). Some relativistic cosmological models (PhD Thesis), reprinted, with historical comments, in Gen. Rel. Grav. 30, 1665 (1998). [110]

508

References

Kantowski, R. and Sachs, R. K. (1966). Some spatially homogeneous anisotropic relativistic cosmological models, J. Math. Phys. 7, 443. [86, 110, 192] Kasner, E. (1921). Geometrical theorems on Einstein’s cosmological equations, Amer. J. Math. 43, 217. [148] Kellogg, O. D. (1929). Foundations of potential theory. New York: Frederick Ungar, pp. 184–191. [493] Kerr, R. P. (1963). Gravitational field of a spinning mass as an example of algebraically special metrics, Phys. Rev. Lett. 11, 237. [438, 446, 448] Kerr, R. P. and Schild, A. (1965). A new class of vacuum solutions of the Einstein field equations, in Atti del Convegno sulla Relatività Generale: Problemi dell’Energia e Onde Gravitazionali. Florence: G. Barbèra, pp. 1–12. [438, 441, 444] Kinnersley, W. (1969). Type D vacuum metrics, J. Math. Phys. 10, 1195. [175] Klapdor-Kleingrothaus, H. V. (Editor) (2001). Dark Matter in Astro- and Particle Physics. Proceedings of the International Conference DARK 2000, Heidelberg, Germany, 2000. Berlin – Heidelberg: Springer. [287] Klein, O. (1926). Quantentheorie und fünfdimensionale Relativitätstheorie [Quantum theory and five-dimensional relativity], Z. Physik 37, 895 (1926); The atomicity of electricity as a quantum theory law, Nature 118, 516 (1926). [164] Knopp, K. (1996). Theory of Functions, Part II. New York: Dover. [460] Kompaneets, A. S. and Chernov, A. S. (1964). Solutions of the gravitation equations for a homogeneous anisotropic model, Zh. Eksper. Teor. Fiz. 47, 1939; English translation: Sov. Phys. JETP 20, 1303 (1965). [110] Kopczy´nski, W. and Trautman, A. (1992). Spacetime and Gravitation. Warsaw: Pa´nstwowe Wydawnictwo Naukowe, and Chichester – New York – Brisbane – Toronto – Singapore: J. Wiley. [500] Korkina, M. P. and Martinenko, V. G. (1975). Dovilni ‘T-kuli’ v zagalniy teorii vidnosti [Arbitrary ‘T-spheres’ in the general theory of relativity], Ukr. Fiz. Zh. 20, 626. [386] Kottler, F. (1918). Über die physikalischen Grundlagen der Einsteinschen Gravitationstheorie [On the physical foundations of Einstein’s gravitation theory], Ann. Physik 56, 410. [175] Kraniotis, G. V. (2004). Precise relativistic orbits in Kerr space-time with a cosmological constant. Preprint, gr-qc 0405095. [466] Krasi´nski, A. (1974). Solutions of the Einstein field equations for a rotating perfect fluid. Part I – Presentation of the flow-stationary and vortex-homogeneous solutions, Acta. Phys. Polon. B5, 411 (1974); Part II – Properties of the flow-stationary and vortex-homogeneous solutions, Acta. Phys. Polon. B6, 223 (1975). [105] Krasi´nski, A. (1978). Ellipsoidal spacetimes, sources for the Kerr metric, Ann. Phys. 112, 22. [492, 495] Krasi´nski, A. (1980). A Newtonian model of the source of the Kerr metric, Phys. Lett. A80, 238. [493, 494] Krasi´nski, A. (1981). Spacetimes with spherically symmetric hypersurfaces, Gen. Rel. Grav. 13, 1021. [105] Krasi´nski, A (1983). Symmetries of the Riemann tensor, in 10th International Conference on General Relativity and Gravitation. Abstracts of contributed papers. Edited by F. de Felice and A. Pascolini. Padua: University of Padua, p. 290. [78, 79] Krasi´nski, A. (1997). Inhomogeneous Cosmological Models. Cambridge: Cambridge University Press. [xviii, 146, 202, 291, 298, 302, 304, 309, 353, 374, 386, 392, 426] Krasi´nski, A. (1998). Rotating dust solutions of Einstein’s equations with 3-dimensional symmetry groups; Part 1: Two Killing fields spanned on u and w , J. Math. Phys.

References

509

39, 380; Part 2: One Killing field spanned on u and w , J. Math. Phys. 39, 401; Part 3: All Killing fields linearly independent of u and w , J. Math. Phys. 39, 2148. [105] Krasi´nski, A. (1999). [Editorial note to the Nariai 1950 papers] Gen. Rel. Grav. 31, 945. [171] Krasi´nski, A. (2001a). Rotating Bianchi type V dust models generalizing the k = −1 Friedmann models, J. Math. Phys. 42, 355; Friedmann limits of hypersurfacehomogeneous rotating dust models, J. Math. Phys. 42, 3628. [105] Krasi´nski, A. (2001b). The newest release of the Ortocartan set of programs for algebraic calculations in general relativity, Gen. Rel. Grav. 33, 145. [98] Krasi´nski, A., Behr, C. G., Schücking, E., Estabrook, F. B., Wahlquist, H. D., Ellis, G. F. R., Jantzen, R. and Kundt, W. (2003). The Bianchi classification in the Schücking– Behr approach, Gen. Rel. Grav. 35, 475. [99] Krasi´nski, A. and Ellis, G. F. R. (1999). Editor’s note: On the curvature of space; On the possibility of a world with constant negative curvature of space, Gen. Rel. Grav. 31, 1985. [145, 262, 263] Krasi´nski, A. and Hellaby, C. (2002) Structure formation in the Lemaître–Tolman model, Phys. Rev. D65, 023501. [303, 304, 305, 306, 308, 332] Krasi´nski, A. and Hellaby, C. (2004a). More examples of structure formation in the Lemaître–Tolman model, Phys. Rev. D69, 023502. [303, 304, 307, 308, 332] Krasi´nski, A. and Hellaby, C. (2004b). Formation of a galaxy with a central black hole in the Lemaître–Tolman model, Phys. Rev. D69, 043502. [304, 308, 313, 325, 332] Krasi´nski, A. and Hellaby, C. (2005) Structure formation in the Lemaître–Tolman cosmological model (a non-perturbative approach), in: Topics in mathematical physics, general relativity and cosmology. Proceedings of the symposium on the occasion of the 75th birthday of J. Pleba´nski, Mexico 2002. In press. [303, 304, 308, 332] Krasi´nski, A. and Pleba´nski, J. (1980). N -dimensional complex Riemann–Einstein spaces with On − 1 C as the symmetry group, Rep. Math. Phys. 17, 217. [171] Krasi´nski, A., Quevedo, H. and Sussman, R. (1997). On thermodynamical interpretation of perfect fluid solutions of the Einstein equations with no symmetry, J. Math. Phys. 38, 2602; more detailed version available as a preprint. [233, 397] Kristian, J. and Sachs, R. K. (1966). Observations in cosmology, Astrophys. J. 143, 379. [237] Kruskal, M. (1960). Maximal extension of Schwarzschild metric, Phys. Rev. 119, 1743. [191] Kundt, W. (2003). The spatially homogeneous cosmological models, Gen. Rel. Grav. 35, 491. [99] Kurki-Suonio, H. and Liang, E. (1992). Relation of redshift surveys to matter distribution in spherically symmetric dust Universes, Astrophys. J. 390, 5. [360] Lake, K. General Relativity Database. (An interactive program to identify manifolds with given properties.) Available at www.grdb.org. [71] Lake, K. and Pim, R. (1985). Development of voids in the thin-wall approximation. I General characteristics of spherical vacuum voids, Astrophys. J. 298, 439. [310] Lang, K. (1974). Astrophysical Formulae. Berlin – Heidelberg – New York: Springer. [182, 268] Lang, K. (1999). Astrophysical Formulae. Volume I: Radiation, Gas Processes and High Energy Astrophysics; Volume II: Space, Time, Matter and Cosmology. Berlin – Heidelberg – New York: Springer. [283, 284, 289] Laplace, P. S. (1795). Exposition du Système du Monde [Presentation of the World System]; cited after Schneider, Ehlers and Falco (1992). [201]

510

References

Lemaître, G. (1927). Un univers homogène de masse constante et de rayon croissant, rendant compte de la vitesse radiale de nébuleuses extra-galactiques [A homogeneous Universe of constant mass and increasing radius accounting for the radial velocity of the extra-galactic nebulae], Ann. Soc. Sci. Bruxelles A47, 49; English translation (somewhat updated): Mon. Not. Roy. Astr. Soc. 91, 483 (1931). [236, 262, 287] Lemaître, G. (1931). A homogeneous Universe of constant mass and increasing radius accounting for the radial velocity of the extra-galactic nebulae, Mon. Not. R. Astr. Soc. 91, 483. [262, 263] Lemaître, G. (1933a). L’Univers en expansion [The expanding Universe], Ann. Soc. Sci. Bruxelles A53, 51; English translation, with historical comments: Gen. Rel. Grav. 29, 637 (1997). [191, 203, 296, 297, 298] Lemaître, G. (1933b). La formation des nébuleuses dans l’univers en expansion [Formation of nebulae in the expanding Universe], C. R. Acad. Sci. Paris 196, 1085. [303] Lemos, J. P. S. (1991). On naked singularities in self-similar Tolman–Bondi spacetimes, Phys. Lett. A158, 279. [344] Lense, J. and Thirring, H. (1918). Über den Einfluß der Eigenrotation der Zentralkörper auf die Bewegung der Planeten und Monde nach der Einsteinschen Gravitationstheorie [On the influence of the proper rotation of central bodies on the motions of planets and moons according to Einstein’s theory of gravitation], Phys. Zeitschr. 19, 156. English translation with comments: Gen. Rel. Grav. 16, 711 (1984). [160] Letelier, P. S. (1980). Anisotropic fluids with two perfect-fluid components, Phys. Rev. D22, 807. [397] Li, J. Z. and Liang, C. B. (1985). A new plane-symmetric solution of Einstein–Maxwell equations, Chin. Phys. Lett. 2, 23. [172] MacCallum, M. A. H. (1979). Anisotropic and inhomogeneous relativistic cosmologies, in General Relativity, an Einstein Centenary Survey, Edited by S. W. Hawking and W. Israel, Cambridge: Cambridge University Press, pp. 552–553. [136] MacCallum, M. A. H. and Ellis, G. F. R. (1970). A class of homogeneous cosmological models, Commun. Math. Phys. 19, 31. [99] Maeda, K., Sasaki, M. and Sato, H. (1983). Voids in the closed Universe, Progr. Theor. Phys. 69, 89. [303] Maeda, K. and Sato, H. (1983a). Expansion of a thin shell around a void in expanding Universe, Progr. Theor. Phys. 70, 772. [303] Maeda, K. and Sato, H. (1983b). Expansion of a thin shell around a void in expanding Universe. II, Progr. Theor. Phys. 70, 1276. [303] Markov, M. A. and Frolov, V. P. (1970). Metrika zakrytogo mira Fridmana, vozmushchennaya elektricheskim zaryadom (k teorii elektromagnitnykh ’Fridmonov’ [The metric of a closed Friedman world perturbed by an electric charge (towards a theory of electromagnetic ‘Friedmons’)], Teor. Mat. Fiz. 3, 3; English translation: Theor. Math. Phys. 3, 301 (1970). [374] Mather, J. C., Bennett, C. L., Boggess, N. W., Hauser, M. G., Smoot, G. F. and Wright, E. L. (1993). Recent results from COBE, in: General Relativity and Gravitation 1992. Proceedings of the 13th International Conference on General Relativity and Gravitation at Cordoba 1992. Edited by R. J. Gleiser, C. N. Kozameh and O. M. Moreschi. Boston and Philadelphia: Institute of Physics Publishing, pp. 151–158. [331] Mattig, W. (1958) Über den Zusammenhang zwischen Rotverschiebung und scheinbarer Helligkeit [On the connection between redshift and apparent luminosity]. Astron. Nachr. 284, 109. [271]

References

511

Mehra, J. (1974). Einstein, Hilbert and the Theory of Gravitation. Dordrecht: D. Reidel. [4, 132, 500] Mészáros, A. (1986). New model of the metagalaxy, Acta Phys. Hung. 60, 75. [357] Miller, B. D. (1976). Negative-mass lagging cores of the Big Bang, Astrophys. J. 208, 275. [353] Milne, E. A. (1934). A Newtonian expanding Universe, Quart. J. Math. Oxford 5, 64 (1934); McCrea, W. H. and Milne, E. A. Newtonian Universes and the curvature of space, Quart. J. Math. Oxford 5, 73 (1934); both papers reprinted, with historical comments, in Gen. Rel. Grav. 32, 1933 (2000). [145, 273] Milne, E. A. (1948). Kinematic Relativity. Oxford: Clarendon Press. [273] Misner, C. W. and D. H. Sharp (1964). Relativistic equations for adiabatic, spherically symmetric gravitational collapse, Phys. Rev. B136, 571. [296] Misner, C. W., Thorne, K. S. and Wheeler, J. A. (1973). Gravitation. San Francisco: Freeman. [140, 145, 289, 470, 498, 499] Mustapha, N. and Hellaby, C. (2001). Clumps into voids, Gen. Rel. Grav. 33, 455. [303] Nariai, H. (1950). On some static solutions of Einstein’s gravitational field equations in a spherically symmetric case, Scientific Reports of the Tôhoku University 34, 160 (1950); On a new cosmological solution of Einstein’s field equations of gravitation, Scientific Reports of the Tôhoku University 35, 46 (1951); both papers reprinted, with historical comments, in Gen. Rel. Grav. 31, 951 (1999). [171, 296] Neeman, Y. and Tauber, G. (1967). The lagging-core model for quasi-stellar sources, Astrophys. J. 150, 755. [201, 353] Newman, E. T., Couch, E., Chinnapared, K., Exton, A., Prakash, A. and Torrence, R. (1965). Metric of a rotating charged mass, J. Math. Phys. 6, 918. [458] Newman, R. P. A. C. (1986). Strengths of naked singularities in Tolman–Bondi spacetimes, Class. Quant. Grav. 3, 527. [336, 337, 344] Nordström, G. (1918). On the energy of the gravitational field in Einstein’s theory, Koninklijke Nederlandsche Akademie van Wetenschappen Proceedings 20, 1238. [175] Novikov, I. D. (1962a). O nekotorykh svoystvakh resheniy uravneniy Eynshteina dlya sfericheski simmetrichnykh polyey tyagotyeniya (I) [On some properties of solutions of Einstein’s equations for spherically symmetric gravitational fields (I)], Vestn. Mosk. Univ. no. 5, 90. [353, 373] Novikov, I. D. (1962b). O povedenii sfericheski-symmetrichnykh raspredeleniy mass v obshchey teorii otnositelnosti [On the behaviour of spherically symmetric mass distributions in the general relativity theory], Vestn. Mosk. Univ. no. 6, 66. [171, 362] Novikov, I. D. (1964a). Zaderzhka vzryva chasti Fridmanovskogo mira i sverkhzvezdy [Delayed explosion of a part of the Fridman Universe and quasars], Astron. Zh. 41, 1075; English translation: Sov. Astr. A. J. 8, 857 (1965). [201, 353] Novikov, I. D. (1964b). R- i T-oblasti v prostranstve-vremeni so sfericheski-simetrichnym prostranstvom [R- and T-regions in a spacetime with a spherically symmetric space], Soobshcheniya GAISh 132, 3; English translation, with historical comments: Gen. Rel. Grav. 33, 2255 (2001). [191, 203, 363] Ohanian, H. C. and Ruffini, R. (1994). Gravitation and Spacetime. New York – London: W. W. Norton & Company. [498] Omer, G. C. (1965). Spherically symmetric distributions of matter without pressure, Proc. Nat. Acad. Sci. USA 53, 1. [298] Oppenheimer, J. R. and Snyder, H. (1939). On continued gravitational contraction, Phys. Rev. 56, 455. [316]

512

References

Ori, A., (1990). The general solution for spherical charged dust, Class. Quant. Grav. 7, 985. [379, 380, 381, 382, 383] Ori, A. (1991). Inevitability of shell crossing in the gravitational collapse of weakly charged dust spheres, Phys. Rev. D44, 2278. [379, 383] Padmanabhan, T. (1993). Structure Formation in the Universe, Cambridge: Cambridge University Press. [268, 285, 286, 288] Padmanabhan, T. (1996). Cosmology and Astrophysics Through Problems, Cambridge: Cambridge University Press. [303] Pais, A. (1982). Subtle is the Lord... The Science and the Life of Albert Einstein. Oxford: Oxford University Press. [500] Palatini, A. (1919). Deduzione invariantiva delle equazioni gravitazionali dal principio di Hamilton [Invariant deduction of the gravitational equations from Hamilton’s principle], Rendiconti del Circolo Matematico di Palermo 43, 203 (1919). [136] Partovi, H. H. and Mashhoon, B. (1984). Toward verification of large-scale homogeneity in cosmology, Astrophys. J. 276, 4. [359] Peebles, P. J. E. (1993). Principles of Physical Cosmology. Princeton: Princeton University Press. [268, 285, 286] Penrose, R. (1960). A spinor approach to general relativity, Ann. Phys. 10, 171. [70, 113, 117, 119] Penrose, R. (1964). Conformal treatment of infinity, in Relativity, groups and cosmology. Edited by B. and C. deWitt. New York – London: Gordon and Breach, pp. 565–584. [321] Penrose, R. (1969). Gravitational Collapse: the Role of General Relativity. Rivista del Nuovo Cimento, Numero Speziale I, 252; reprinted, with historical comments, in Gen. Rel. Grav. 34, 1135 (2002). [339, 486] Penrose, R. and Rindler, W. (1984). Spinors and Space-Time. Cambridge: Cambridge University Press. [113, 499] Penzias, A. A. and Wilson, R. W. (1965). A measurement of excess antenna temperature at 4080 Mc/s, Astrophys. J. 142, 419. [288] Perlmutter, S., Aldering, G., Goldhaber, G., Knop, R. A., Nugent, P., Castro, P. G., Deustua, S., Fabbro, S., Goobar, A., Groom, D. E., Hook, I. M., Kim, A. G., Kim, M. Y., Lee, L. C., Nunes, N. J., Pain, R., Pennypacker, C. R., Quimby, R., Lidman, C., Ellis, R.S., Irwin, M., McMahon, R. G., Ruiz-Lapuente, P. , Walton, N., Schaefer, B., Boyle, B. J., Filippenko, A. V., Matheson, T., Fruchter, A. S., Panagia, N., Newberg, H. J. M. and Couch, W. J. (1999). Measurements of Omega and Lambda from 42 High-Redshift Supernovae. Astrophys. J. 517, 565. [286, 289] Petrov, A. Z. (1954). Klassifikacya prostranstv opredelyaushchikh polya tyagoteniya [The classification of spaces defining gravitational fields]. Uchenye Zapiski Kazanskogo Gosudarstvennogo Universiteta im. V. I. Ulyanovicha-Lenina 114(8), 55. English translation, with historical comments: Gen. Rel. Grav. 32, 1665 (2000). [70] Pirani, F. A. E. (1957). Invariant formulation of gravitational radiation theory. Phys. Rev. 105, 1089. [70] Pleba´nski, J. (1964). Notes from Lectures on General Relativity. Part I: Mathematical Introduction. CINVESTAV, Mexico. [Note: this is a xeroxed typescript. Part II and following may have never appeared even in this form.] [xvii] Pleba´nski, J. (1967). On Conformally Equivalent Riemannian Spaces. CINVESTAV, Mexico. [Note: this is a xeroxed typescript.] [69, 92] Pleba´nski, J. (1974). Spinors, Tetrads and Forms. Part I. CINVESTAV, Mexico 1974, Part II: CINVESTAV, Mexico 1975. [Note: these are xerox copies of handwritten notes. This work has apparently never been published.] [113]

References

513

Podurets, M. A. (1964). Ob odnoy forme uravneniy Eynshteyna dlya sfericheski simmetrichnogo dvizheniya sploshnoy sredy [On one form of Einstein’s equations for spherically symmetrical motion of a continuous medium], Astron. Zh. 41, 28; English translation: Sov. Astr. A. J. 8, 19 (1964). [296] Quevedo, H. and Sussman, R. (1995). On the thermodynamics of simple non-isentropic perfect fluids in general relativity, Class. Quant. Grav. 12, 859; Thermodynamics of the Stephani Universe, J. Math. Phys. 36, 1365. [233] Raine, D. J. and Thomas, E. G. (1981). Large-scale inhomogeneity in the Universe and the anisotropy of the microwave background, Mon. Not. Roy. Astr. Soc. 195, 649. [331] Raszewski, P. K. (1958). Geometria Riemanna i analiza tensorowa [Riemann Geometry and Tensor Analysis]. (Polish translation from Russian). Warsaw: Pa´nstwowe Wydawnictwo Naukowe. [58] Raychaudhuri, A. K. (1953). Arbitrary concentrations of matter and the Schwarzschild singularity, Phys. Rev. 89, 417. [191] Raychaudhuri, A. K. (1955). Relativistic cosmology. I Phys. Rev. 98, 1123 (1955); reprinted, with historical comments: Gen. Rel. Grav. 32, 743 (2000); Singular state in relativistic cosmology, Phys. Rev. 106, 172 (1957). [229] Raychaudhuri, A. K. (1979). Theoretical Cosmology. Oxford: Clarendon Press. [425] Reissner, H. (1916). Über die Eigengravitation des elektrischen Feldes nach der Einsteinschen Theorie [On the self-gravitation of the electric field according to Einstein’s theory], Ann. Physik 50, 106. [175] Ribeiro, M. B. (1992a). On modelling a relativistic hierarchical (fractal) cosmology by Tolman’s spacetime. I. Theory, Astrophys. J. 388, 1. [332, 362] Ribeiro, M. B. (1992b). On modelling a relativistic hierarchical (fractal) cosmology by Tolman’s spacetime. II. Analysis of the Einstein–de Sitter model, Astrophys. J. 395, 29. [362] Ribeiro, M. B. (1993). On modelling a relativistic hierarchical (fractal) cosmology by Tolman’s spacetime. III. Numerical results, Astrophys. J. 415, 469. [362] Rindler, W. (1956). Visual horizons in world models, Mon. Not. Roy. Astr. Soc. 116, 662; reprinted, with historical comments: Gen. Rel. Grav. 34, 131 (2002). [277] Rindler, W. (1980). Essential Relativity. Special, General and Cosmological. Revised 2nd ed. Berlin: Springer. [276, 500] Robertson, H. P. (1929). On the foundations of relativistic cosmology Proc. Nat. Acad. Sci. USA 15, 822. [111, 262] Robertson, H. P. (1933). Relativistic cosmology, Rev. Mod. Phys. 5, 62. [111, 263] Robertson, H. P. and T. W. Noonan (1968). Relativity and Cosmology. Philadelphia – London – Toronto: W. B. Saunders Company, p. 374–378. [276] Robinson, I. (1959). A solution of the Einstein–Maxwell equations, Bull. Acad. Polon. Sci., Ser. Mat. Fis. Astr. 7, 351. [171] Roos, W. (1976). On the existence of interior solutions in general relativity, Gen. Rel. Grav. 7, 431. [494] Rosen, N. (1973). A bi-metric theory of gravitation, Gen. Rel. Grav. 4, 435. [151] Rothman, T. (2002). [Editorial note to the Droste 1917 paper] Gen. Rel. Grav. 34, 1541. [175] Rothman, T. and Ellis, G. F. R. (1987). Metaflation? Astronomy 15 no 2, 6; see also the University of Cape Town preprint 85/18. [286] Royal Astronomical Society Discussion (1930). Observatory 53, 39. [262] Ruban, V. A. (1968). T -modeli ‘shara’ v obshchey teorii otnositelnosti [T -models of a ‘sphere’ in general relativity theory], Pis’ma v Red. ZhETF 8, 669; English

514

References

translation: Sov. Phys. JETP Lett. 8, 414 (1968); reprinted, with historical comments: Gen. Rel. Grav. 33, 363 (2001). [110, 385] Ruban, V. A. (1969). Sfericheski-symmetrichnye T -modeli v obshchey teorii otnositelnosti [Spherically symmetric T -models in the general theory of relativity], Zh. Eksper. Teor. Fiz. 56, 1914; English translation: Sov. Phys. JETP 29, 1027 (1969); reprinted, with historical comments: Gen. Rel. Grav. 33, 375 (2001). [110, 385, 386] Ruban, V. A. (1972). Neodnorodnye kosmologicheskiye modeli s ploskoy i psevdosfericheskoy simmetriyami [Inhomogeneous cosmological models with flat and pseudospherical symmetries], in: Tezisy dokladov 3-y Sovetskoy Gravitatsyonnoy Konferentsii [Theses of Lectures of the 3rd Soviet Conference on Gravitation]. Izdatel’stvo Erevanskogo Universiteta, Erevan, pp. 348–351. [385] Ruban, V. A. (1983). T-modeli shara w obshchey teorii otnositelnosti (II) [T-models of a sphere in the general theory of relativity (II)], Zh. Eksper. Teor. Fiz. 85, 801; English translation: Sov. Phys. JETP 58, 463 (1983). [385, 387] Saez, D., Arnau, J. V. and Fullana, M. J. (1993). The imprints of the Great Attractor and the Virgo cluster on the microwave background, Mon. Not. Roy. Astr. Soc. 263, 681. [330, 331] Sato, H. (1984). Voids in expanding Universe, in: General Relativity and Gravitation. Edited by B. Bertotti, F. de Felice and A. Pascolini. Dordrecht: D. Reidel, pp. 289– 312. [303, 310] Sato, H. and Maeda, K. (1983). The expansion law of the void in the expanding Universe, Progr. Theor. Phys. 70, 119. [303] Schneider, P., Ehlers, J. and Falco, E. E. (1992). Gravitational Lenses. Berlin: Springer. [187, 189, 190, 191, 220] Schouten, J. A. and Struik, D. J. (1935). Einführung in die neueren Methoden der Differentialgeometrie, Band 1 [Introduction to the newer methods of differential geometry, Vol. 1]. Groningen - Batavia: P. Noordhoff N. V., p. 142. [80] Schouten, J. A. and van Kampen, E. R. (1934). Beiträge zur Theorie der Deformation [Contributions to the deformation theory], Prace Matematyczno-Fizyczne 41, 1. [Note: in citations of this paper, even by Schouten himself, the title of the journal and the date of publication are distorted. The citation here is correct.] [80] Schwarzschild, K. (1916a). Über das Gravitationsfeld eines Massenpunktes nach der Einsteinschen Theorie [On the gravitational field of a point mass according to Einstein’s theory], Sitzungsber. Preuss. Akad. Wiss. p. 189. [175] Schwarzschild, K. (1916b). Über das Gravitationsfeld einer Kugel aus inkompressibler Flüssigkeit nach der Einsteinschen Theorie [On the gravitational field of a sphere of incompressible fluid according to the Einstein theory], Sitzungsber. Preuss. Akad. Wiss. p. 424. [206] Sen, N. R. (1934). On the stability of cosmological models Z. Astrophysik 9, 215; reprinted, with historical comments, in Gen. Rel. Grav. 29, 1473 (1997). [301] Senin, Yu. E. (1982). Kosmologiya s toroidalnym raspredeleniyem zhidkosti [Cosmology with a toroidal distribution of a fluid], in: Problemy teorii gravitatsii i elementarnykh chastits [Problems of the Theory of Gravitation and Elementary Particles], 13th issue. Edited by K. P. Stanyukovich. Moscow: Energoizdat, pp. 107–111. [428] Senovilla, J. M. M. (1998). Singularity theorems and their consequences Gen. Rel. Grav. 30, 701. [231] Shikin, I. S. (1972). Gravitational fields with groups of motions on two-dimensional transitivity hypersurfaces in a model with matter and a magnetic field, Commun. Math. Phys. 26, 24. [374, 378]

References

515

Shikin, I. S. (1974). Issledovaniye klassa polyey tyagotyeniya dlya zaryazhennoy pylevidnoy sredy [Investigation of a class of gravitational fields of charged dust medium], Zh. Eksper. Teor. Fiz. 67, 433; English translation: Sov. Phys. JETP 40, 215 (1975). [374] Silk, J. (1977). Large-scale inhomogeneity of the Universe, Astron. Astrophys. 59, 53. [299, 349] ´ Slebodzi´ nski, W. (1931). Sur les équations canoniques de Hamilton [On Hamilton’s canonical equations], Bulletins de la Classe des Sciences, Acad. Royale de Belg. (5) 17, 864. [80] Soldner, J. (1804). Über die Ablenkung eines Lichtstrahls von seiner geradelinigen Bewegung durch die Attraktion eines Weltkörpers, an welchem er nahe vorbeigeht [On the deflection of a light ray from its rectilinear motion by the attraction of a heavenly body, nearby which it is passing], Berliner Astronomisches Jahrbuch 1804, p. 161; cited after Schneider, Ehlers and Falco (1992). [187, 220] Spero, A. and Szafron, D. A. (1978). Spatial conformal flatness in homogeneous and inhomogeneous cosmologies, J. Math. Phys. 19, 1536. [397, 436] Stephani, H. (1967a). Über Lösungen der Eisteinschen Feldgleichungen, die sich in einen fünfdimensionalen flachen Raum einbetten lassen [On solutions of Einstein’s equations that can be embedded in a five-dimensional flat space], Commun. Math. Phys. 4, 137. [230, 233, 263, 291] Stephani, H. (1967b). Konform flache Gravitationsfelder [Conformally flat gravitational fields], Commun. Math. Phys. 5, 337. [69] Stephani, H. (1990). General Relativity. Second edition. Cambridge: Cambridge University Press. [78, 154, 156, 159, 266] Stephani, H., Kramer, D., MacCallum, M., Hoenselaers, C. and Herlt, E. (2003). Exact Solutions of Einstein’s Field Equations. 2nd Edition. Cambridge: Cambridge University Press. [70, 71, 105, 108, 145, 146, 154, 171, 230, 245, 253, 263, 291, 375, 458, 459, 488, 498, 499] Stoeger, R. W., Ellis, G. F. R. and Nel, S. D. (1992). Observational cosmology: III. Exact spherically symmetric dust solutions, Class. Quant. Grav. 9, 509. [300, 321, 363] Suto, Y., Sato, K. and Sato, H. (1984). Expansion of voids in a matter-dominated Universe, Progr. Theor. Phys. 71, 938; Nonlinear evolution of negative density perturbations in a radiation-dominated Universe, Progr. Theor. Phys. 72, 1137. [325] Synge, J. L. (1965). Relativity: The Special Theory. 2nd ed. North-Holland, Amsterdam. [500] Szafron, D. A. (1977). Inhomogeneous cosmologies: New exact solutions and their evolution, J. Math. Phys. 18, 1673. [233, 387, 391, 396, 398, 428] Szafron, D. A. and Collins, C. B. (1979). A new approach to inhomogeneous cosmologies. II. Conformally flat slices and an invariant classification, J. Math. Phys. 20, 2354. [396, 398] Szafron, D. A. and Wainwright, J. (1977). A class of inhomogeneous perfect fluid cosmologies, J. Math. Phys. 18, 1668. [426] Szekeres, G. (1960). On the singularities of a Riemannian manifold, Publicationes Mathematicae Debrecen 7, 285; reprinted, with historical comments: Gen. Rel. Grav. 34, 1995 (2002). [191] Szekeres, P. (1975a). A class of inhomogeneous cosmological models, Commun. Math. Phys. 41, 55. [400, 401] Szekeres, P. (1975b). Quasispherical gravitational collapse, Phys. Rev. D12, 2941. [311, 411, 419]

516

References

Szekeres, P. (1980). Naked singularities, in: Gravitational Radiation, Collapsed Objects and Exact Solutions. Edited by C. Edwards. New York: Springer (Lecture Notes in Physics, vol. 124), pp. 477–487. [337] Taub, A. H. (1951). Empty space-times admitting a three parameter group of motions, Ann. Math., 53, 472; reprinted, with historical comments: Gen. Rel. Grav. 36, 2689 (2004). [99] Tolman, R. C. (1934). Effect of inhomogeneity on cosmological models, Proc. Nat. Acad. Sci. USA 20, 169; reprinted, with historical comments: Gen. Rel. Grav. 29, 931 (1997). [297, 301] Tomimatsu, A. and Sato, H. (1972). New exact solution for the gravitational field of a spinning mass, Phys. Rev. Lett. 29, 1344. [499] Trautman, A. (1972). On the Einstein–Cartan equations, Bull. Acad. Polon. Sci., sér. sci. math., astr. et phys. 20 Part I: 185–190, Part II: 503–506, Part III: 895–896 (1972); 21 Part IV: 345–346 (1973); On the structure of the Einstein-Cartan equations, Symposia Mathematica 12 139 (1973). [150] Vickers, P. A. (1973). Charged dust spheres in general relativity, Ann. Inst. Poincaré A18, 137. [374, 376, 377, 380] Wagoner, R. V. (1970). Scalar–tensor theory and gravitational waves, Phys. Rev. D1, 3209. [150] Wagoner, R. V., Fowler, W. A. and Hoyle, F. (1967). On the synthesis of elements at very high temperatures, Astrophys. J. 148, 3. [288] Wainwright, J. (1977). Characterization of the Szekeres inhomogeneous cosmologies as algebraically special space-times, J. Math. Phys. 18, 672. [398] Wainwright, J. and Yaremovicz, P. E. A. (1976). Killing vector fields and the Einstein– Maxwell field equations with perfect fluid source, Gen. Rel. Grav. 7, 345; Symmetries of the Einstein–Maxwell field equations: the null field case, Gen. Rel. Grav. 7, 595. [172] Walker, A. G. (1935). On Riemannian spaces with spherical symmetry about a line, and the conditions for isotropy in general relativity, Quart. J. Math. Oxford, ser. 6, 81. [111, 263] Waugh, B. and Lake, K. (1988). Strengths of shell-focusing singularities in marginally bound collapsing self-similar Tolman spacetimes, Phys. Rev. D38, 1315. [344] Waugh, B. and Lake, K. (1989). Shell-focusing singularities in spherically symmetric self-similar Tolman spacetimes, Phys. Rev. D40, 2137. [344] Weber, J. (1961). General Relativity and Gravitational Waves. New York: Wiley Interscience. [498] Webster, A. G. (1949). The Dynamics of Particles and of Rigid, Elastic and Fluid Bodies. New York: Hafner, p. 413. [493] Weinberg, S. (1972). Gravitation and Cosmology. Wiley: New York. [425, 499] Werle, J. (1957). Termodynamika fenomenologiczna [Phenomenological Thermodynamics]. Warsaw: Pa´nstwowe Wydawnictwo Naukowe, pp. 78–80 (in Polish). [232] Will, C. M. (1981). Theory and Experiment in Gravitational Physics. Cambridge: Cambridge University Press. [2, 140, 149, 182, 187, 499] Will, C. M. (1988). Henry Cavendish, Johann von Soldner, and the deflection of light, Amer. J. Phys. 56, 413; cited after Schneider, Ehlers and Falco (1992). [187, 220] WMAP (2004). Fluctuations in the cosmic microwave background, http://map.gsfc.nasa.gov/m_uni/uni_101Flucts.html [331]

References

517

Wolf, T. (1985). Exakte Lösungen der Einsteinschen Feldgleichungen mit flachen Schnitten [Exact solutions of the Einstein field equations with flat sections.] Ph. D. Thesis, University of Jena. [105] Yodzis, P., Seifert, H. J. and Müller zum Hagen, H. (1973). On the occurrence of naked singularities in general relativity, Commun. Math. Phys. 34, 135. [341, 343] Zel’dovich, Ya. B. and Novikov, I. D. (1971). Relativistic Astrophysics: Volume I: Stars and Relativity. Chicago: University of Chicago Press. [499] Zel’dovich, Ya. B. and Novikov, I. D. (1974). Relativistic Astrophysics: Volume II: The Universe and Relativity. Chicago: University of Chicago Press. [499]

Index

Note: In general, only those appearances of each term are listed where something of importance is said about it. Simple references to frequently used terms, such as ‘coordinates’ or ‘metric’, are not listed. 4-potential, see electromagnetic 4-potential accelerated expansion of the Universe 265, 277 frame 125 motion 5, 125 reference system 5 acceleration 2, 4, 5, 13, 125, 126, 218, 227, 241, 248–252, 290, 296, 396, 407, 458 absolute- 2 of a light ray 241, 248–252 of expansion of the Universe 274–277 relative- 125 -transformations 92 -vector 227 active gravitational mass 297, 298, 353, 354, 373, 376, 386, 408 affine connection 30, 32–35, 38, 48, 51, 106 parameter 35, 45, 49, 63, 129, 141, 143, 176, 177, 194, 217–219, 221, 240, 256, 259, 260, 264, 311, 330, 344–346, 368, 466, 470, 471, 475, 476, 481, 483, 484 parametrisation 49, 143, 238, 241, 242, 312, 328–330, 365, 440, 441, 464, 476, 477 radius 363 algebraically special metric 440 spacetime 253 Weyl tensor 245, 246, 251 angular momentum 158, 160, 179, 180, 185, 447, 458, 467, 469, 487, 494 scale 290, 331 separation 187 size 259 velocity 160, 178, 223, 489 anisotropic fluid 231, 494 stress 495

anisotropy of matter distribution 236 of temperature of the CMB radiation 290, 331 cosine- 357 quadrupole- 357 antigravitation 219, 378 antilinear index 114 transformation 113 antiparallel angular velocities 178 antipodal point 278, 396, 407 antisymmetric part of a tensor 19, 30, 87, 100, 158, 229, 241 spinor 119 tensor (density) 18, 22, 23, 25–27, 46, 60, 66, 88–89, 95, 100, 113, 115, 121, 161, 172, 237, 420, 495 antisymmetrisation 19, 24, 46–47, 97, 229 antisymmetry 52, 95, 97, 113, 116, 120, 172, 223, 228, 240, 371 anti-self-dual (spinor or tensor) 115 apparent horizon 202, 242, 243, 281, 282, 311, 312–314, 317, 318, 319, 321, 322, 325, 326, 333, 335, 336, 339, 341–344, 358, 359, 364, 366, 414–415 future 202, 243, 318, 319, 321, 322, 325, 341, 343, 358, 359 past 243, 282, 319, 321, 322, 325, 358 magnitude 287 position 185, 187, 188 areal radius 295, 319, 338, 348, 409, 413–414 asymptote 184, 185 asymptotic approach 217, 273, 275, 276, 317, 319, 400, 483, 489 flatness 489 past 303 plane 196 state 275, 446 value 270

518

Index asymptotically Cartesian coordinates 136, 143, 160 flat region 379, 475 spacetime 136, 488–490 axial cross-section 448, 460–462, 485 symmetry 487, 488 axially symmetric metric/spacetime/surface 448, 491, 495 axisymmetric metric 499 rotation 139 solution of Einstein’s equations 232, 498 spacetime 487–490, 499 back-reaction 154 bang time 315, 357, 361, 422 -time function 297, 361 barotropic (equation of state) Bianchi identities Big Bang 201, 282, 283, 297, 303, 313, 315, 317, 319, 321–324, 327, 332, 333, 336, 337, 346, 347, 348, 353, 356–360, 362, 377, 385, 399–401, 403, 408, 413, 415, 418, 426–427, 430, 436 -function 317, 347, 348, 352 lagging cores of 353 non-simultaneity of 362, 426 -set 283, 333 simultaneous- 357, 426–427 -singularity 282, 297, 317, 322, 332, 347, 362, 377, 385, 399, 401, 430 -time 315, 409 Big Crunch 315, 317–319, 321, 322, 327, 332–339, 342, 343, 345, 346, 352, 356, 357, 359, 360, 377, 403, 408, 413, 415, 418, 428 -function 317, 343, 345, 346, 359 -set 333, 334, 336 -singularity 315, 321, 322, 332, 334–339, 342–344, 352, 377 -time 336 Birkhoff theorem 174, 176 bi-tensor 39 black body radiation 288 spectrum 287, 330 black hole 50, 62, 168, 179–180, 182, 200–202, 205, 219, 242, 281, 308, 316–319, 438, 446, 467, 486, 487 central- (in a galaxy) 308 dynamical- 242 evolution leading to 318 -formation 316, 319 in the evolving Universe 316 Kerr- 486 -model 281

519

Reissner–Nordström- 219 rotating- 438, 446, 487 rotational energy of 487 -theory 316 Boltzmann constant 288 Boyer–Lindquist (B–L) construction 475 see also coordinates, Boyer–Lindquist Cartesian product 171 reference system 4 see also coordinates, Cartesian Cauchy problem 498 Christoffel symbols 51, 54, 81, 95, 96, 126–128, 133, 134, 139, 146, 154, 162, 165, 177, 237, 340, 439, 440, 442 class of a Riemann space 69 collineation 90 commutator formula for directional derivatives 252, 443, 444 of directional covariant derivatives 38 of linear operators 47 of second covariant derivatives 36, 37, 42, 47, 245 of vector fields 38, 91, 101, 102, 107, 111 comoving boundaries 303 distance 361 extrema of density 366 hypersurface 420 observer 281, 316 size 303 time 232, 399 volume element 141, 142 see also coordinates, comoving conformal condition 91 curvature 58 diagram 209, 210, 211, 212, 215, 216 factor 91, 105 image 72, 210, 211 Killing vector field 86, 87, 89, 91–92, 344 mapping 57, 58, 72, 190 symmetry 86, 88, 90, 92, 105, 389 transformation 150 conformally equivalent metrics 86 spaces 86 flat metric 58, 60, 89, 190, 206, 245, 263, 291, 488 space 57, 58, 69, 190, 202, 397, 398, 436 invariant theory 150 related metrics 58 spaces 56, 57, 58, 72

520

Index

connection see also affine connection coefficients 31, 35, 44, 48, 51, 136, 150, 226 forms 95, 96 symmetric part of 35 terms 257 contraction (of a tensor over indices) 18, 27, 29, 46, 89, 252 coordinate -components of a tensor field 29 -system 14, 94, 202 time- 61, 128 -transformation 21, 22, 74 5-dimensional- 165 coordinates 13, 15, 126, 170, 171 adapted- 38, 47, 68, 69, 70, 141, 142, 152, 206, 375, 445, 477, 483, 487–489 Boyer–Lindquist- (B–L) 449, 451, 459–462, 464, 467, 475–479, 483, 492, 497 Cartesian- 1, 33, 44–46, 48, 53, 61, 82, 83, 91–92, 130, 136, 143, 160, 196, 219, 222, 238, 247, 367, 395, 419, 436, 441, 446, 448, 484, 491, 493, 495 approximately- 448 asymptotically- 136, 143, 160 locally- 61 orthogonal- 441 rectangular- 48, 53, 222, 448, 491 comoving- 141, 143, 152, 203, 263, 264, 283, 294, 300, 310, 315, 333, 336–339, 347, 367–369, 380, 387 comoving–synchronous- 294, 367, 369 complex- 390 cylindrical- 196, 489 Fermi- 127, 128 Gautreau- 310, 337, 338–340 geodesic- 203, 220 isotropic- 202 Kruskal–Szekeres- 196 Lemaître- 191, 203, 290, 332, 341, 342, 386, 436 locally Cartesian- 61 locally Minkowskian- 260 Lorentzian- 160, 439 mass-curvature- 379, 380 Novikov- 203, 290, 332, 341, 342, 386, 436 null- 210, 215, 321, 441, 485 observational- 300 polar- 33, 35, 54, 104, 184, 185, 220, 419 radial- 359 rotating- 160 space- 62, 128, 156, 225, 263, 497 spherical- 35, 53, 72, 83, 84, 86, 93, 168, 178, 183, 419 spheroidal- 476, 493 synchronous- 294, 367, 368, 369 Szekeres–Szafron- 394, 396

cosmic censorship 339, 344, 499 conjecture 446 hypothesis 339 postulate 344 expansion 309, 310, 311 fluid 235 matter density 311 medium 190 microwave background radiation 236, 283, 330 repulsion 277 cosmological attraction 273 constant 144–146, 150, 171, 174, 176, 203, 262, 265, 268, 273, 275, 277, 282, 286, 287, 295, 303, 347, 369, 370, 374, 375, 388, 392, 399, 428, 453, 455, 458, 459, 466 problem 286 repulsive 347 value of 265, 275, 277, 286 model 201, 203, 239, 240, 268, 273, 281, 286, 290, 299, 328, 362, 363 best fit- 286 parallax distances 300 parameter 359, 360 principle 235, 236, 301 redshift 239 repulsion 145, 274, 303 scale 190 singularity 201 solution 233 cosmology 111, 168, 203, 232, 233, 235, 236, 243, 253, 259, 261, 266, 271, 281, 282, 285, 288, 294, 296, 339, 366, 367, 391, 397, 428 Newtonian 271 observational cosmology programme 300 R–W- 281, 290 Cotton–York tensor 58, 60, 397, 436 covariant action integral 133 components 50, 438 constancy 43, 65, 106, 136 definition 69 derivative 26, 28–33, 36, 42–44, 47, 51, 59, 64, 65, 69, 78, 87, 89, 96, 134, 151, 153, 154, 162, 228, 237, 241, 257, 439, 440, 442, 495 along a curve (directional) 33, 38, 64, 81, 143, 228 second- 36, 37, 42, 59, 65 commutator of 37, 42 third 65 differentiation 28, 36, 37, 39, 42, 64, 65 divergence 135, 144 doubly covariant tensor 16, 17, 24, 25, 32, 77 equation 63, 133, 299 form of the Maxwell equations 161 Lorentz- (description of electromagnetic field) 161

Index non- 69, 445 rotation 32 spinor 113 tensor 18, 21, 32, 48, 57, 77, 115, 404 theory 165 vector (-field) 14, 16, 21, 26, 29, 32, 36, 37, 39, 40, 43, 50, 59, 91, 94, 95, 100, 113, 114 covariantly constant fields 43, 44, 51, 96, 135 crunch time 315, 321, 325, 327, 357, 358, 413 curvature 12, 39, 46, 54, 60, 87, 90, 91, 94, 98, 104, 106, 112, 126, 127, 131, 171, 191, 237, 254, 262, 268, 269, 278, 299, 303, 317, 325, 338, 351, 354, 389, 393, 394, 397 conformal- 58 constant- 79, 91, 93, 104, 262, 291, 292, 367, 389, 390, 392, 394, 396, 397, 398, 436 -contrast 349, 353 -coordinates 168, 171, 191, 192, 194–196, 202, 294, 300, 310, 364, 379, 380, 385, 386 extrinsic- 65 focussing by 254 Gauss- 54, 55 -index 261, 268, 275, 277, 285, 332, 369, 397 mass- (coordinates) 379, 380 normal- 54 of a curve 55 of a manifold 36 of a Riemann space 51, 189, 228, 269, 273, 276 of a surface 12, 54, 55, 72 perturbation of 351 quick calculation of 94 radius 310 relation to parallel transport 39 Riemann- 54 scalar- 97, 104, 149, 166, 349, 367, 389 sign of 273, 276 -singularity 324, 338, 346, 384, 426 spaces of constant- 79, 91, 93, 262 spatial- 268, 276 -tensor 36, 37, 43, 46, 47, 51, 54, 55, 79, 98, 131, 151, 152, 154, 245, 253, 340, 367, 368, 435 tetrad components of 191 zero-curvature limit 90 Datt–Ruban metric/model 110, 373, 384, 386, 388, 391, 392, 415, 436 de Sitter spacetime 91, 93, 109, 284, 291, 400 Debever congruence 476 method (of Petrov classification) 120 spinor 117–122 vector (field) 121, 122, 246, 250, 253, 440 deceleration parameter 265, 270 density background- 303, 331, 425

521

constant 296 -contrast 303, 349, 352 critical- 266, 267, 268, 283, 286, 331 dipole component of 420 -distribution 15, 130, 304, 306, 308, 346, 493, 495 energy- 130, 139, 140, 141, 146, 158, 162, 236, 254, 266, 284, 344, 381, 399, 430 enthalpy- 232 extrema of 366 fluctuations of 303 homogeneous- 361, 495 infinite- 274, 302, 399 initial- 302, 316, 346, 361 mass- 130, 139, 152, 205, 206, 235, 267, 286, 289, 297, 300, 321, 323, 324, 325, 347, 348, 361, 365, 366, 373, 375, 378, 382 -in the redshift space 361 physical- 361 matter- 131, 172, 268, 286, 288, 300, 301, 311, 316, 357, 360, 362, 385, 386, 391, 393, 394, 400, 419, 420, 424, 425, 494 maximal 274 mean/average density of matter 409 in the Sun 200 in the Universe 125, 136, 145, 268, 282, 286, 311, 331 nuclear 282 observed- 268, 287 of angular momentum 158 of dust 383 of electric charge 161, 373, 375, 378, 379, 381 of magnetic monopoles 374 of rest mass 204 -parameter 331 particle number- 231, 234 -perturbation 349, 351, 425 decreasing 349 increasing 349 present- (in the Universe) 282, 286 -profile 306, 331 proper- 361 scalar- 17, 24, 30, 36, 37, 43, 133 spinor- 114 Hermitean 114 tensor- 17, 18, 19, 22, 26, 28–32, 34, 37–39, 43, 100 -to density evolution 304, 307 total- (in the Universe) 286 vector- 17, 28 velocity to density evolution 306 vs. distance 362 -waves 366 zero- 274 derivative as a vector field 20, 21 directional 14, 16, 70, 83, 96, 252, 444, 495

522

Index

derivative (cont.) exterior 95, 98 Lie- 80, 81, 82, 107 logarithmic 365 time-derivative of the quadrupole moment 158 see also covariant derivative differentiable curve 10, 347 manifold 13, 19, 22 vector field 75 velocity field 222, 224 differential -equation(s) 28, 35, 39, 44, 69, 70, 132, 169, 240, 267, 300, 329, 338, 341, 375, 382, 386, 414, 445, 453 -form 94–97, 162, 173, 232, 456 -geometry 6, 17, 228 2-dimensional- 9, 48 -identities (of the curvature tensor) 46, 47 perfect- 34, 232 differentiation covariant- 28, 36, 37, 39, 42 of tensors 26 direct (orbital motion or orbit) 178, 469, 474 distance 48, 50, 157, 179, 189, 190, 197, 200, 215, 235, 240, 253, 255, 259, 264, 266, 268, 329, 331, 332, 335, 339, 450, 471, 472, 486 area- 253, 257 observer- 255, 259, 270 source- 255, 282, 287, 295 comoving- 361 definition of 253, 255, 259 dimension of 179 extremal- 55, 56 geodesic- 297 infinite- 219 limit of 136 intergalactic- 190, 268 large- 144 luminosity- 190, 362 corrected- 259 minimal- 181 parallax- 300 parallelism at 9, 12 parameter- 76 radial- 176, 321, 407 redshift–distance relation 265, 270 unit of 269 double-null tetrad 97, 243, 245, 246, 250, 251, 441 dragging inertial frames 160, 451, 466 a vector along a curve 12 dual anti-self- (tensors/spinors) 115 -basis 29, 44, 94

self- (tensors/spinors) 115 tensor 162 duality 40, 167 rotation 163, 167, 173, 220, 458 dust 140, 143, 145–147, 229, 233, 254, 262, 284, 303, 313, 314, 316, 322, 324, 327, 337, 338, 339, 341–343, 353, 360, 363, 366, 369, 370, 373, 374, 377–379, 383, 384, 392, 407, 425 charged- 219, 369, 373, 375, 376, 378, 379, 382–384 -distribution 336 -era 286 interplanetary- 3 -particles 315, 318, 370, 378, 383 -solution 369 eccentricity of an orbit 180, 181, 185 effect Lense–Thirring- 160 of the cosmological constant 144 quantum- 231 effective antigravitation 219, 378 mass 372, 376, 378 eigenframe 397, 436 eigenspace 397, 436 eigensurface 399 eigenvalue 71, 100, 101, 112, 119, 120, 142, 172, 397–399, 436 eigenvector 142, 172, 224, 234, 398 Einstein –Cartan theory 150, 151 equations 131, 132, 135–136, 139, 144, 145, 147, 148, 150, 151, 154, 164, 166–168, 171, 172, 175, 203, 220, 228, 230, 263, 266, 267, 290, 294, 295, 297, 300, 309, 363, 370, 374, 380, 386–388, 398, 401, 431, 432, 434, 439, 440, 457, 459, 488, 494, 498, 499 linearised 155, 156 modified 144, 145, 160 Newtonian limit of 136 solutions of 105, 145, 148, 151, 168, 175, 176, 202, 231, 232, 245, 253, 263, 285, 387, 398, 438, 446, 488, 498 matching 151 sources 125, 294 5-dimensional 166 –Maxwell equations 161, 163, 164, 166, 171, 173, 174, 369, 370, 373, 375, 382, 384, 385, 455, 457, 458, 499 variational principle for 164 tensor 131, 144, 152, 153, 263, 267, 293, 387, 430, 456 theory 126, 132, 136, 140, 149, 150, 151, 154, 337, 387 linearised 157, 366, 387 weak-field approximation 154 Universe 145, 267, 275–277, 291, 302, 303, 363

Index electric charge 15, 161, 173, 194, 220, 370, 377, 378, 382, 384, 385, 453, 455, 458, 459 density of 161, 374 prevention of singularity by 377 current 140, 163 field 70, 161, 163, 213, 218, 219, 370, 374, 378, 384, 385 part of the Weyl tensor 70, 229 purely electric Weyl tensor 398 electrically neutral particles 219, 374 electrodynamics 151, 155, 156, 172, 500 electromagnetic field 161–163, 166, 172, 173, 176, 218, 220, 235, 237, 369, 374, 375, 384, 455, 456 energy-momentum tensor of 132, 162, 163, 172, 173, 238 in vacuum 135, 172, 174 tensor 70, 161, 163, 174, 218, 370, 381, 456, 457 interactions 289 origin of antigravitation 219 wave 188, 237, 238, 239, 337 4-potential 162, 164, 455 electromagnetism 164, 167 electron 288, 289 electrostatic field 171 repulsion 378 electrovacuum metric 375, 385, 459 ellipse 2, 3, 41, 449, 462, 494, 497 ellipsoid 446, 448, 449, 451, 490, 491, 493, 494, 495 ellipsoidal spacetime 490–493 ellipsoidality 492 elliptic evolution 412 function 180, 269, 392, 399, 400 integral 179 model 314, 412 orbit 2, 180 region (of a Universe) 314–316 solution 408 energy 130, 137, 140, 141, 185, 201, 203, 205, 220, 273, 298, 353, 354, 469, 487 at infinity 469 chemical- 141 -conservation equation 143, 220, 296 dark- 268, 287 -density 130, 139, 140, 141, 146, 158, 162, 236, 254, 266, 284, 344, 381, 399, 430 equivalent of the rest mass 469 -extraction (from a black hole) 487 -flow 141 flux of 255 -function (in the L–T model) 372 initial-, variations in 362 internal- 232

523

kinetic- 137, 203 -momentum tensor 130–132, 140, 142, 150, 152, 154, 156, 160, 162, 163, 172–174, 238, 254, 266, 284, 285, 290 negative- 469, 470, 486, 487 -output 201 per unit mass 408 potential- 354 -production in a star 205 rest- 137, 139–141, 469 rotational energy of a black hole 486, 487 -stream 130, 139, 141, 143, 151, 162 total- 137, 185, 220, 273, 297, 469, 486 transport of 140 zero-energy L–T model 374 enthalpy 232 -density 232 proper- 232 equation/equations of hydrostatic equilibrium 203, 205 of motion 4, 47, 130, 137, 139, 143, 154, 158, 160, 163, 167, 205, 218, 231, 266, 267, 271, 272, 278, 284, 373, 379, 381, 384, 493 see also under specific names, e.g. Raychaudhuri equation equivalence 119, 126, 236, 293, 458 problem 71 ergosphere 487 Ernst potential 499 Euler equations of motion 143, 160 Euler–Lagrange equations 55, 132, 133, 137, 464 expansion in power series 156 lagging cores of 201 of the Universe 144, 145, 201, 223, 262, 265, 273–275, 287, 303, 305, 306, 308, 309, 363 accelerated- 277 exponential- 284, 347 influence on planetary orbits 309–311 isotropic- 223 velocity of 263, 270, 302, 306 -scalar 223, 227, 230, 291, 292, 426 of a family of light rays 242–244, 255, 260, 281 flat limit 90 manifold 36, 43–46, 115 metric 136, 151, 154, 155, 438, 439, 444, 476 approximately 265, 447 asymptotically 490 conformally- 58, 60, 89, 190, 245, 263, 291, 488 region asymptotically- 379, 475 Riemann space 52–54, 57, 69, 79, 90, 91, 129, 196, 197, 436 conformally- 57, 58, 69, 202, 398, 436

524

Index

flat (cont.) space 9, 10, 69, 90, 91, 92, 154, 171, 213, 214, 216, 217, 238, 254, 262, 299, 360, 368, 436, 484, 491 spacetime 61, 136, 243 approximately- 483 asymptotically- 136, 488–490 conformally- 190, 206, 397 surface 54, 90 Universe 262, 268, 283, 292, 353 ‘flatness problem’ 282, 285, 286 focus (of an ellipse) 2 focussing of light rays 189, 324 by curvature 254, 255, 259, 271 limiting focussing condition 344 see also shell focussing Friedmann 262 background 299, 310, 331, 332, 425 curvature contrast 353 curvature index 332, 369 equation 266, 273, 399, 401, 407 limit of the L–T + Szekeres models 297, 299, 306, 310, 349, 350, 364, 369, 374, 401, 423 mass 309, 310, 332, 369 model/solution/spacetime(s) 203, 236, 262, 267, 269, 270, 273, 275, 277, 281, 299, 302, 303, 330, 331, 348, 349, 354, 362, 364, 366, 373, 386, 400, 401, 407, 420, 422, 423 apparent horizon in 314 instability of 301 matched: to the Schwarzschild solution 309, 316 to the L–T model 332 perturbation of 302, 351, 352 Friedmann–Lemaître models 236, 263, 297 future 61, 62, 151, 210, 212, 230, 231, 276, 280, 334, 336, 363, 380, 475, 477, 478, 479, 481, 485 -apparent horizon 202, 243, 313, 314, 318, 319, 321, 322, 325, 341, 343, 358, 359, 366, 414 -directed curve 212, 311, 326, 333, 345 -event horizon 317, 319, 321 -evolution of spacetime 243 -light cone 62, 461 -infinity null 342, 343 timelike 358 -pointing vector field 476–479 -singularity 194, 195, 269 -trapped surface 243

Gauss – Codazzi equations 68, 69, 152, 153 -curvature 54, 55 -law 158 generating techniques 498, 499

generation of electric field 370, 375 of energy stream by pressure 143 of gravitational waves 498 of perturbations in a model 299, 351–353, 361, 362, 425 of structures in the Universe 303 generator of a cylinder 54, 385, 428 of a group 76–79, 81–84, 86–88, 90–92, 99, 104, 106, 110, 111, 112, 146, 172, 365, 448 of a light cone 62, 461 geodesic 10, 45, 62, 72, 127, 129, 131, 143, 176, 194, 217, 218, 255, 264, 291, 292, 312, 324, 344, 374, 464, 466, 467, 481 -completeness 481 -coordinates 203, 220 -deviation 45, 256, 338, 346 -equation 46, 257, 342 -distance 297 -equation 35, 56, 72, 137, 176, 177, 183, 186, 217, 374, 453, 464, 466, 483, 484 -line 33–35, 55, 72, 126 -motion 138, 143 null- 62, 183, 186, 190, 194, 196, 202, 209, 210, 212, 215, 218, 219, 221, 240, 247, 254, 260, 263, 265, 277, 281, 293, 300, 311, 313, 317, 319, 320, 321, 325, 326, 328, 331, 334, 342, 344, 346, 464, 466, 467, 470–473, 476, 477, 481, 483 -radius 309 spacelike- 483 timelike- 126, 127, 176, 177, 194, 196, 200, 219, 221, 296, 311, 344, 464, 466, 467, 471, 474, 483 -vector field 238, 241, 246, 250, 251, 253, 312, 398, 440, 441, 476, 477 geodesically complete spacetime 481 Gibbs identity 232, 234 Goldberg–Sachs theorem 253, 441, 442, 476 G3 /S2 -symmetric spacetime 368, 369, 370, 394, 398 gravitation laws of 125, 184 other theories of 149 self- 176 -theory 1, 3, 129, 130, 132, 133, 136, 145, 151, 160, 167, 201 linearised- 154 gravitational attraction 145, 205, 277, 378 constant 149, 175, 181 deflection of light 184–186, 188 field 3–5, 13, 45, 58, 69, 125–126, 129–131, 136, 139, 143, 154, 160, 163, 168, 174, 176, 178, 183, 217, 218, 271, 438, 451, 469, 487, 493, 498 weak- 140 force 5, 13, 45, 125, 126, 311 interaction 2–4, 125, 354

Index lens 186, 189–191, 287 equation of 189 mass 126 active- 297, 298, 353, 373, 376, 386, 408 -defect 373, 386 -excess 373 total- 354 perturbation 182 potential 130, 131, 137, 494 radius 182, 200, 205 wave 58, 498

Haantjes [acceleration] transformation 92, 390 Hamilton–Cayley equation 118 Hamilton–Jacobi equation 453 method 464 Hamiltonian 464, 465 history of cosmic censorship hypothesis 341 of cosmological constant 145 of R–W models 263 of Kantowski–Sachs metrics 110 of relativity 4, 97, 498–500 of the Universe 287 homoeoid 493 homogeneity of the Universe 362 homogeneous background 303 Big Bang 289 density 361, 391, 420, 495 equation(s) 39, 60, 78, 180, 426 gravitational field 125, 126 hypersurface 108 matter distribution 271 metric 109, 136, 144, 232, 285 spatially- 261, 386 space 105, 236 spacetime 106 spatially- 106, 109, 146, 203 horizon 277, 498 apparent- 202, 242, 243, 281, 311–314, 317, 318, 321, 326, 333, 335, 336, 339, 341, 342, 344, 359, 364, 366, 414–415, 417–418 future- 202, 243, 313, 318, 319, 321, 322, 325, 341, 343, 358, 359 past- 243, 282, 313, 319, 321, 322, 325, 358 event- 195, 198, 199, 202, 207, 212, 213, 216, 219, 221, 242, 243, 277–280, 299, 312, 317, 319, 321–323, 341–343, 359, 363, 386, 459, 460, 461, 462, 472, 475–479, 481, 483, 485–487 particle- 277, 278, 280, 281 -‘problem’ 282, 283, 285, 347, 348

525

Reissner–Nordström- 379 Schwarzschild- 312, 316, 387, 459, 467 Hubble 145, 262 constant 190, 267, 362 formula 190 law 264, 268, 272, 362 parameter 264, 265, 270, 287, 311, 331, 357, 361 hypersurface 14, 61, 62, 68, 69, 72, 86, 94, 95, 105, 106, 108, 141–143, 152, 153, 193, 194, 196, 200, 202, 225, 239, 240, 261, 277, 291, 313, 375, 387, 415, 418, 451, 459, 467 -element 120 infinite redshift 451 last scattering- 283 of constant time 225 of simultaneity 225 -orthogonal vector field 487 stationary limit- 451, 459, 469, 486, 487, 497 induced metric 53, 152, 375 transformation 94, 99, 150, 488 variation of the gravitational constant 149 inhomogeneity decaying- 362, 400 growing- 362, 400 growth of 301 in matter distribution 330, 331, 361, 425 measure of 306 inhomogeneous distribution of matter 186, 287, 290, 293 equation(s) 156, 169, 180 models of the Universe 294, 296, 360, 420 spacetime 359 transformation(s) 176 Universe 285, 361 invariance -equation 79, 80 -group 77, 78, 79, 89, 90 -transformation 75, 77, 79, 81, 90, 91, 106 invariant conformally invariant theory 150 definition of R–W models 290, 291, 299 of Szekeres–Szafron models 397, 398 scalar 104 tensor field 74–76, 78, 80, 91 vector field 106–108, 112 isentropic motion 233 isometric spaces 54, 91, 359, 481 isometry 75, 90, 91, 92, 168, 172, 434 group 82, 88, 104, 370 isotropic expansion 223 matter distribution 271 metric 144, 261

526 isotropic (cont.) space 236 spacetime 109 see also coordinates, isotropic isotropy of the cosmic microwave background of the R–W models 279 of the Universe 235

Index

236, 290

Jacobi identity 47, 100 matrix 22, 380 Jacobian 17, 171, 364 Kaluza–Klein theory 149, 161, 164, 166, 167 Kantowski–Sachs (K–S) class 110 geometry 386, 397 spacetime 192, 436 symmetry 86, 110, 176 Kerr black hole 486 geometry 481 Hamiltonian 465 limit 458 manifold 451, 460, 462, 471, 481 metric 253, 438, 446–449, 451–455, 458–462, 466, 476, 480, 485, 487, 490–495, 499 with cosmological constant 458, 459 solution 194, 441, 446, 451, 458, 459, 464, 466, 493, 494, 498 Newtonian analogue of 493 source of 494 spacetime 178, 460, 461, 463, 466, 475, 482, 486, 487, 490 Kerr–Newman solution 459 Kerr–Schild form 476 metrics 438, 440, 441, 445 term 447 vector field 440, 476, 484 Killing equations 77–80, 82, 83, 84, 91, 104, 108, 109, 146, 290, 368, 435, 436, 448 vectors (vector fields) 77–79, 81, 83, 86, 91, 93, 107–110, 165, 168, 219, 292, 344, 368, 386, 435, 444, 445, 448, 464, 487, 488, 489 algebra of 81, 436 conformal 86, 87, 89, 91, 92 finite basis of 78, 79, 81, 86–89 Klein–Gordon equation 452–455 Kottler solution 363 Kretschmann scalar 404, 408 Kronecker delta 23, 26, 28, 47 multidimensional 23, 24

Kruskal diagram 194–196, 201, 209, 243, 359, 462, 479 extension of the Schwarzschild manifold 477–479 method 207 wormhole 314 Kruskal–Szekeres coordinates 196 representation of the Schwarzschild solution 194 throat 325 transformation 191 Lagrange function 137 Lagrangian 137, 138, 164, 167, 464 Laplace 201 equation 493, 494 last scattering 283, 347 Lemaître coordinates for the Schwarzschild metric 191, 203, 290, 332, 341, 342, 386, 436 definition of mass 296 metric 111 –Novikov representation of the Schwarzschild solution 309 see also Lemaître coordinates Lemaître–Tolman (L–T) counterexamples to cosmic censorship 344 evolution 304, 306 limit of the Szekeres solutions 393, 394, 401 mass 310, 332, 361 metric/model/solution/spacetime 203, 281, 282, 285, 287, 289, 296, 297, 298, 300, 302, 312, 332, 337, 353, 367, 374 Big Bang in 337, 347 extension through a shell crossing 337 matching to the Friedmann and Schwarzschild solutions 332, 341, 343 singularities in 332 shell crossing singularity 338, 339 solution of the ‘horizon problem’ in 348 see whole Chapter 18 perturbation of the Friedmann models 302, 331 transition zone 303, 354 Lense–Thirring effect 160 Le Verrier 182 Levi-Civita symbol 22–24, 26, 28, 58, 88, 100, 113–115, 119, 160 Lie algebra 81, 99 Bianchi classification of 99 derivative 80–82, 99, 107 transport 107 light 5 absorption 254, 259 atomic nuclei 289

Index cone

61–63, 201, 241, 283, 284, 315, 333, 337, 362, 461, 463, 477, 479, 496, 497 future- 461 past- 283, 319, 361–363 emission 259 extinction 287 flash 243 front 243, 260, 312 intensity 190 propagation 287 ray 4, 5, 9, 189, 195, 200, 202, 220, 239, 240, 242, 243, 255, 256, 273, 281, 311–314, 316, 325, 328, 331, 333–337, 339, 343–345, 346, 359, 365, 414, 418, 489, 490 acceleration of 241 gravitational deflection of 183–187, 189, 190, 220 orbit of 183–185 tangent vector to 263 redshift of 328, 451 signal 194, 201, 202, 279, 280 source 239, 240, 254, 256, 264, 279, 360 velocity 129, 130, 177, 181, 201, 238, 239, 337, 451 wave 239, 240, 337 wave description of 242 year 190 local Big Bang 353 change of scale 150 condensation 348, 349 curvature 299 directions of flow 285 embedding 63 geometry 54, 367, 428–430 gravitational field 126 inertial frame 125, 126, 129, 144, 160 mean matter density 125 minimum of the Big Bang function 347 of orbital distance 220 observations 235, 243 orthogonal space 240, 260, 490, 491 rotational symmetry 398 time of BB/BC 408 value of matter density 268 localised perturbation 331 locally isometric spaces 91 measured velocity of light 239 Minkowskian coordinates 260 naked singularity 339, 344, 346 nonrotating observers 487, 489, 490, 496 see also coordinates, locally Cartesian Lorentz coordinates 160 -covariance of Maxwell’s equations 161

527

-covariant description of electromagnetic field 161 force 371 rotation 363 transformation 73, 91, 94, 158, 161, 444 Lorentzian manifold 49 metric form of 154, 155 signature 70, 369 lower dimension 50 index 18, 23, 27, 60 tetrad index 244 limit of a function 180 lowering an index 50, 92, 96, 113–115, 122, 154, 238, 438 luminosity 254 absolute 286 -distance 190, 262 corrected- 259 Mach’s principle 1–4, 149 magnetic charge 173, 220, 370, 374, 375, 382, 384, 453, 455, 458 current 163 field 70, 161, 163, 370 monopole 163, 172, 173, 370, 374 part of the Weyl tensor 70, 229, 396, 436 map 13, 21, 56, 74, 191, 356, 380, 382, 479 Schwarzschild- 194 topographic 317 mapping(s) 13, 14, 17, 19–22, 50, 74, 75, 81, 92, 104, 105, 115, 209, 210, 270, 333, 396, 403, 409, 499 associated 20, 21 bilinear 120 conformal 57, 58, 72, 190 family of 104 group of 104, 105 inverse 50, 56, 57, 116 linear 20, 39, 114, 120 Mercator- 72 multi-valued 460 of Riemann spaces 56 mass 126, 139, 157, 158, 175, 176, 179, 200, 201, 203, 204, 218, 219, 273, 282, 296, 303, 311, 317, 354, 360, 361, 369, 372, 373, 380, 401, 447, 458, 464, 486, 487, 493, 494 centre of 13, 158, 176 -conservation 143, 267, 371 -coordinate 304, 318, 327 -curvature coordinates 379, 380 -defect/excess 205, 298, 373, 386 deflecting- 186 -density 130, 139, 152, 205, 206, 235, 267, 286, 289, 297, 300, 321, 323–325, 347, 348, 361, 365, 366, 373, 375, 378, 382 average/mean- 145, 200, 235, 331

528

Index

mass (cont.) -dipole 157, 419 -distribution 139, 160, 186, 206, 287, 303, 419, 426 effective- 372, 376, 378 -flow 140 fractal distribution of 362 Friedmann- 309, 310, 332 -integral 309, 369, 399 -function 361 gravitational- 126 active- 297, 298, 354, 373, 376, 386, 408 total- 354 inertial- 126 influence of charge on 374 Lemaître–Tolman- 310, 332 of a particle 184 of a photon 184 of a singularity 353 of our Galaxy 190, 200 of the Sun 181, 316 of the Universe 288 -parameter 204, 213, 332, 341, 342, 453 point- 176 -quadrupole 157 rest- 15, 204, 314, 353, 354, 361, 371, 373, 386, 469 Schwarzschild- 309, 310, 403 solar 200 zero- 186 massive black hole 201 Matching metrics 151, 152, 153, 206, 310, 332, 375 Mattig formula 271 maximal angle of deflection of light 186 density 274 dimension of a group 88, 89 expansion of the Universe 274, 306, 314–316, 319, 325, 326, 387, 400, 418, 437 extension of the Kerr solution 460, 475, 482, 486 of the R–N solution 204, 211, 216 of the Schwarzschild spacetime 194, 195 luminosity 286 number of Killing fields 79 size 275 temperature anisotropies of CMB 290, 331 maximum areal radius 413 of the BB/BC function 317, 359, 360 metric 14, 48, 49, 52, 53, 56, 57, 86 5-dimensional 164, 165 background- 151, 155, 442, 444 co-form 453 conformal symmetry of 86 conformally flat- 58, 60, 89, 245 related- 58

degenerate- 49, 50 electrovacuum- 375 Euclidean- 104 flat- 154, 439, 444, 476 -form 48, 54, 85, 86, 109, 111, 168, 196, 197, 453 indefinite- 213, 214, 217, 394 induced- 53 invariant- 75 linearised- 157, 159 multidimensional- 167 positive-definite- 50 scalar- 245 signature of 49, 50 -space 50 -tensor 48, 49, 51, 52, 54, 56, 57, 72, 79 limits of 90 tetrad- 94, 244 see also under specific names, e.g. ‘Kerr metric’ Mendeleev table 288 Mercator mapping 72 Mercury 2, 3, 149, 180–182, 187 Minkowski metric/spacetime 61, 62, 63, 90–93, 115, 116, 125, 138, 160, 172, 190, 247, 271, 291, 441, 447

neck

296, 312, 314, 325, 326, 354, 358, 359, 360, 373, 386, 410, 414, 418 see also wormhole Neptune 2 Newman–Penrose formalism 245 Newtonian analogue of the Kerr solution 493 cosmology 271 equation(s) of motion 137, 139, 282, 297, 373, 493 gravitation 125 gravitational field 469 force 293 potential 131, 493, 494 hyrdodynamics 226 hydrostatic equilibrium equation 205 Lagrangian 137 limit of relativity 130, 136, 137, 139, 143, 160, 175, 179, 183, 205, 372, 373, 378, 493 orbit 180, 184, 185, 220 physics (appears under various names) 1–6, 13, 125, 126, 129, 130–133, 136, 139, 140, 144, 145, 160, 168, 175, 176, 179, 182, 185, 186, 191, 201, 222, 224, 271, 273, 378, 387, 425, 469, 493, 494 principles of dynamics 13 stress tensor 142 time 373 velocity 137 normal curvature 54 ray 311

Index section 55 vector 63, 65, 68, 70, 135, 152, 333, 376, 406 normalisation 266, 492 Novikov coordinates 203, 290, 332, 341, 342, 386, 436 representation of the Schwarzschild solution 309 null cone 260, 300 congruence 255 coordinate(s) 210, 215, 321, 441, 485 curve/line 62, 63, 216, 240, 242, 245, 311, 333, 347, 462, 477, 481 direction 398, 414, 441 geodesic 62, 176, 183, 186, 190, 194, 196, 202, 209, 210, 212, 215, 218, 219, 221, 240, 247, 254, 260, 263, 265, 277, 281, 293, 311, 313, 317, 319–321, 325, 326, 328, 329, 331, 334, 342, 344, 346–348, 365, 464, 466, 470–473, 475, 476, 477, 481, 483 equation 342 hypersurface 105, 152, 193, 313–315, 333, 358, 485 infinity 210, 211, 216, 319, 321, 342, 343, 478, 481 interval 61 orbit 105, 183, 345 relation 62 set 336, 344 subspace 63 tetrad 97 vector (field) 62, 115, 121, 170, 204, 238, 240, 241, 243, 248, 250, 251, 253, 256, 260, 312, 333, 414, 438, 440, 444, 477, 479, 484, 495 see also double-null tetrad number counts 259 orbit of a group 75–77, 80, 82, 85, 86, 104–106, 109, 110, 168, 171, 233, 310, 345, 367, 368, 392, 394, 397, 488, 489 parameter 80, 91 of a photon 470, 472, 474 of a planet/particle 2, 3, 149, 176–185, 190, 200, 220, 309, 311, 466, 468, 469, 470, 475, 486, 487, 489, 494 parameter 179 orthogonal basis 257 coordinates 375, 441, 451, 491 cross-section 254 curve/line 68, 127, 291, 311, 368, 398, 461, 490, 496 (hyper)surface 14, 142, 225, 226, 240, 241, 242, 255, 257, 260, 398, 445, 487, 490, 491 -element 72, 120, 130, 143 hypersurface-orthogonal vector field 487 projection 223 transformation 94, 112, 148 transitivity 487, 488 vector(s) 14, 64, 66, 94, 95, 108, 127, 129, 141, 225, 241, 243, 247, 257, 260, 344, 398, 440, 444

529

orthogonality relations 441 orthonormal tetrad/basis 97, 98, 116, 142, 173, 204, 267, 299, 387, 430, 452, 456, 469 overdensity 361 Palatini variational principle 136 parameter of an orbit, see orbit of a planet, parameter Parametrised Post-Newtonian (PPN) formalism 140 Pascal law 140, 141 past 61, 62, 212, 230, 231, 243, 269, 276, 287, 288, 347, 348, 357, 380, 477, 481, 485 -apparent horizon 243, 282, 313, 314, 319, 321, 322, 325, 358, 366, 414 asymptotic- 303 -directed curve 366 -infinity 357, 358 -light/null cone 283, 300, 319, 361, 362, 363 -singularity 151, 195 -trapped surface 243, 282 -worldline 319 Pauli matrices 114, 115, 121, 122 Penrose class 119 diagram 210 method (of the Petrov transformation) 70, 117, 120 process 486 transformation 209, 210, 321, 499 see also Newman–Penrose formalism perfect differential 34, 232 fluid 140–143, 152, 153, 160, 172, 203, 204, 228, 230, 231, 233, 234, 254, 255, 263, 266, 284, 285, 290, 291, 294, 359, 363, 386–388, 397, 398, 430–432, 434, 435, 438, 492, 494, 495 perihelion 2, 3, 179, 181 shift 181, 182, 187, 494 Petrov classification 70–71, 113, 116, 117, 119, 120, 122 type(s) 71–73, 117, 121, 122, 245, 396, 398, 440, 452, 458, 476, 495 Planck constant 288 planet(s) 2, 3, 145, 176, 180, 181, 182, 186, 309, 311 Pluto 180, 190 post-Newtonian approximation 157, 182 principal direction 398 spinor 117 propagator of parallel transport 39, 40, 42, 44 proper density 361 enthalpy 232 motion 235 radius 409 Riemannian geometry 49

530

Index

proper (cont.) time 140, 141, 143, 177, 202, 221, 224, 225, 263, 315, 316, 363, 451, 475, 490 volume 232, 259 pullback 20, 21, 56, 57 pushforward 20 quasi -linear differential equation 445 -planar region 404 -pseudo-spherical region 404 -spherical region/model 401, 403, 404, 418 -symmetry 392 radiation 186, 188, 236, 254, 255, 259, 283–285, 287–290, 330, 331, 337, 339, 353, 357 -dominated matter 284, 289 -era 286 -intensity 259 -source 259, 265, 282 raising an index 50, 59, 92, 96, 113, 118, 154, 438 Raychaudhuri equation 228, 229, 230, 248, 426 reciprocal matrix 114, 122 reciprocity theorem 256, 257, 259, 265 recombination 283 redshift 145, 190, 239, 240, 254, 255, 259, 262, 263, 270, 286, 300, 328, 329, 337, 360, 361, 451 infinite 281, 337 -redshift hypersurface 202, 451 –distance relation 265, 270 space 360, 361 refocussing, see focussing Reissner–Nordstöm (R–N) black hole 219 coordinates 219 horizon 379 metric/solution/spacetime 173, 194, 207, 208, 209, 211–213, 216–219, 221, 363, 373, 375–380, 458, 468, 475, 481, 499 throat 384 tunnel 379 relativistic mass defect, - see mass defect retrograde orbit/orbital motion 178, 469, 474, 486, 487 Ricci formula/identity 37, 65, 78, 86, 87, 248 rotation coefficients 95, 96, 244, 245, 247, 442 tensor 58, 97, 104, 131, 146, 150, 166, 173, 344, 346, 397, 398, 436, 442 Riemann/Riemannian curvature 54 geometry 4, 48, 54, 65, 125, 126, 191 manifold 78 space 49, 50, 51, 52, 53, 54, 56–58, 61, 63, 65, 69, 72, 74–75, 78, 82, 83, 85–86, 89, 90, 91, 97, 126, 129 6-dimensional 197

conformally related 56, 57 flat 52, 53, 79, 90, 129, 196 surface 460 tensor 51, 52, 54, 58, 65, 67, 78, 79, 89, 90, 91, 96, 98, 131, 133, 146, 152, 153, 155, 207, 228, 245, 257, 262, 368, 436, 440 tetrad components of 191, 194, 220, 252, 253, 299, 323, 442, 452 Robertson–Walker (R–W) geometry/metric/model/spacetime/Universe 109, 111, 190, 191, 201, 230, 232, 233, 236, 261–266, 268, 271, 277–279, 281–283, 285, 289–293, 299, 300, 354, 357, 360, 391–394, 396, 397, 399, 427, 428, 430, 436 horizons in 277 perturbations of 349 rotating black hole 438, 446, 487 coordinates 160 current 167 rotation 139, 160, 490 angular velocity of 160 duality- 163, 167, 173, 220, 458 -group 82 Lorentz- 363 -tensor 224, 225, 227, 229, 237, 240, 242, 244, 254, 260, 290, 294, 363, 367, 368, 490, 496 -transformation 75, 82–84, 91, 101, 105, 168, 178, 219, 445 -scalar 224, 227, 242, 244 see also Ricci rotation coefficients rotational energy of a black hole 486, 487 symmetry 86, 398 Ruban spacetime 384–388, 391, 392, 415, 436 Saturn 311 scale factor 230, 261, 266, 272, 275 Schwarzschild geometry 183 horizon 194, 282, 312, 316, 341, 342, 387, 459, 467 limit of the Kerr solution 454, 458, 459, 469, 470 of the L–T model 312, 342 manifold 171, 191, 194, 196 map 194 mass 309, 310, 403 metric/solution/spacetime 173, 175, 191, 192, 194–200, 202–204, 206, 213, 220, 243, 299, 309, 316, 332, 341, 354, 359, 363, 386, 387, 401, 436, 437, 438, 450, 451, 453, 475, 485, 495 interior 206 singularity 343 second fundamental form 64, 65, 69, 72, 152, 375, 376 self-dual tensor 115

Index self-intersection of a light cone 62, 63 self-similar spacetime 105, 344, 345, 428 shear 224, 229, 248, 252, 255, 260, 290, 426 propagation equation 229 scalar 227, 242 tensor 224, 227, 242, 244, 396–399, 436 shearfree congruence/vector field 246, 247, 250, 251, 253, 291, 292, 441, 442, 476 shearing motion 224, 227 shell 297, 312, 315, 318, 319, 323, 349, 356, 363, 401, 407, 408, 417, 418 -crossing 297, 305, 306, 312, 314, 321, 323–325, 327, 334, 337–339, 340, 341, 342–344, 347, 348, 349, 352, 354, 355, 359, 361, 365, 366, 377, 378, 379, 383, 384, 399, 401, 404, 407, 408, 410–411, 416, 418, 426 extending a spacetime through- 337, 338 naked- 341, 343 -focussing 333, 342, 344, 346 signature 49, 50, 60, 61, 69–70, 85, 90, 92, 93, 97, 106, 110, 114, 129, 138, 142, 169, 214, 228, 296, 368, 369, 439, 446, 458 singularity 151, 191, 193–195, 200, 202, 207–211, 212–217, 219, 221, 230, 231, 243, 269, 275, 276, 282, 300, 315, 317, 318, 324, 327, 332, 333, 335, 336, 339, 341, 342, 344, 345, 352, 353, 377, 379, 382, 384, 385, 387, 399, 401, 410, 426, 436, 448, 452, 460, 461, 468, 471, 472, 475, 476, 481, 483, 484, 494 Big Bang- 201, 282, 288, 297, 315, 322, 332, 337, 347, 352, 353, 362, 377–379, 382, 384, 399, 401, 430 Big Crunch 315, 321, 322, 332, 334–337, 339, 340, 342, 343, 345, 352, 377, 378, 379, 382, 384 coordinate/spurious- 176, 191, 200, 203, 207, 209–212, 215, 216, 325, 333, 383, 448, 451, 452, 462, 475, 480, 481 -free model 151, 276 final/future- 194, 195, 278, 279, 313, 315, 352, 359, 400, 430, 437 initial/past- 195, 280, 281, 351, 352, 400 naked- 339, 341, 343, 344, 346, 467 locally 339 globally 339, 342, 344, 346 Schwarzschild- 343 -theorems 230, 231 weak- 324 see also shell crossing and shell focussing space, see under specific names, e.g. Riemann space space 1, 2, 4–6, 9 coordinates 62 of constant curvature 79, 91, 93, 104, 262, 291, 292, 367, 390, 392, 394, 396, 397, 398, 436 spacelike coordinate 152, 192, 193 curve 62, 63, 253, 345, 462 geodesic 176, 194, 483

531

(hyper)surface 105, 106, 153, 211, 291, 313, 314, 333, 358, 398, 475, 481 infinity 211 interval 61 relation 62 singularity 332, 333, 336 vector 62, 146, 170, 171, 174, 239, 241, 260, 333, 344, 444 spacetime 61–63, 68, 69, 86, 90, 109, 114, 115, 129, 133, 141, 145, 152, 171, 172, 176, 201, 209, 210, 212, 224, 227, 243, 253, 277, 283, 299, 332, 392, 499 acausal- 212 admitting a thermodynamical scheme 233 asymptotically flat- 136, 488–490 axisymmetric- 487 Bianchi-type-(spatially homogeneous) 99, 105, 106, 107–109, 145, 146, 148, 232 conformally flat- 190 ellipsoidal 490–492 flat- 61, 243 G3 /S2 -symmetric- 368, 398 hyperbolically symmetric- 368 inhomogeneity of 306 nonstatic- 243 of no symmetry 233 plane symmetric- 367 self-similar- 105, 344, 345 spherically symmetric- 178, 294, 362, 368, 490 static- 487 stationary- 487 stationary–axisymmetric- 487–489, 499 with intrinsic symmetry 105 see also under specific names, e.g. Minkowski spacetime special algebraically special spacetime/Weyl tensor 245, 246, 251, 253, 440 Lorentz transformation 91 relativity 1, 49, 61, 62, 90, 91, 125, 129, 130, 132, 136, 138–139, 154, 161, 184, 186, 273, 469, 500 spherical ball 363 coordinates 35, 53, 72, 83, 84, 86, 93, 168, 178, 183, 408, 419, 494 cross-section 326 shell 401 star 296 surface 53, 312, 395, 460 symmetry 172, 311, 368, 375, 386, 392, 415 center of 356 spherically symmetric black hole 201 body 203 charged dust 373 configuration 494 distribution

532

Index

spherically symmetric (cont.) of matter 271, 293, 419, 421 of velocities 271 electromagnetic field 172 gravitational field 69, 168, 174–176, 183, 185, 203 metric(form)/model /solution/space/spacetime 82, 85, 86, 109, 168, 178, 203, 232, 294, 299, 311, 359, 362, 363, 368, 388, 490, 491 potential 494 profile of density 306 spin of matter 151 -tensor 114, 115, 121, 122 spinor 113–117, 119, 122, 499 Debever- 117–122 -density 114 Hermitean- 114 -image of a tensor 114–116, 120–122 -index 114, 122 -method 113, 117, 499 principal- 117 -representation 116 -transformation 114 Weyl- 117 static configuration 378 gravitational field 174 mass/object 139, 205, 362 metric/model/solution/spacetime/Universe 144, 145, 204, 207, 267, 275–277, 291, 377, 385, 399, 487 observer 316 stationary –axisymmetric solution/spacetime 232, 487–489, 498, 499 black hole 446 -limit (hyper)surface 451, 459–462, 469, 487, 497 observer 451 solution/spacetime 316, 487, 490, 491 stereographic projection 394–396, 406, 416 Stokes theorem 41, 135 structure 289, 334 algebraic- 458 chain- 475 -constant(s) 81, 90, 92, 93, 99, 100, 107, 112 -formation 285, 289, 290, 303, 304, 349 global- 191 granular- 235 of a group 90 of the Universe 235, 236 Sun 2, 3, 149, 176, 179, 181, 186–188, 190, 200, 236, 316, 467 surface 35, 54, 62, 72, 84, 86, 104, 105, 130, 158, 191, 194–201, 212, 213, 214, 216, 217, 241, 254, 257, 311, 341, 342, 343, 356, 367, 368, 392, 394, 395, 397, 401, 419, 448, 449, 450, 487

2-dimensional- 12, 41, 48, 53, 54, 55, 88, 171, 196, 212, 242 -area 254, 259, 260 caustic- 255 closed 243 curvature of 12, 54, 55 curved- 10, 11, 13 -element 41, 42, 141, 265 equipotential- 493, 494 flat- 54 -forming vector fields 81, 82, 487 -leaf/sheet 41, 43, 255, 256, 259 -matter distribution 152 multi-sheeted- 63 of a black hole 201 of a body 152 of a charged sphere 378, 379 of a star 296 of constant curvature 396, 397, 398 of the Earth 56, 72, 488 of the Sun 186, 190 Riemann- 460 spherical- 53, 312 trapped- 243, 282, 311 symmetric axially symmetric surface 62 part of a tensor 19, 35, 87, 100, 229, 241 mirror-symmetric surface 198, 325, 326, 458, 467, 472 tensor/spinor(density) [in indices] 18, 27, 48, 50, 52, 58, 64, 70, 88, 115, 116, 118, 121, 122, 128, 130, 131, 136, 144, 148, 172, 238, 495 time-symmetric recollapse 436 see also specific symmetries, e.g. spherically symmetric symmetrisation 19, 229 symmetry 75, 78, 79, 81, 86, 90, 105, 111, 374 -axis 55, 259, 335, 396, 449, 459, 460, 466, 475, 483 centre of 86, 203, 298, 303, 310, 311, 315, 327, 332–334, 339, 341, 347, 359, 360, 365, 378, 382, 385 conformal- 86, 88, 90, 92, 105, 389 -generator 90, 99, 110 -group 81, 85, 86, 89–91, 104, 105, 106, 109, 146, 168, 232, 233, 290, 367, 368, 392, 397, 398, 448, 458 -inheritance 90, 172 intrinsic- 105 local rotational- 398 of a space 74 -orbit 171, 310, 367, 368 perturbations 346 -transformation 74 synchronous coordinates 294, 367, 368, 369 Szafron spacetime 392, 394, 396, 397, 398, 431, 436 Szafron–Wainwright spacetime 426, 428 Szekeres spacetime 396, 398, 399, 400, 401, 403, 404, 407, 408, 418, 419, 420–426

Index tangent curve/line 14, 20, 35, 41, 62, 80–82, 146, 187, 201, 225, 230, 245, 250, 317, 327, 336, 337, 466, 476, 477 direction 206 (hyper)surface 72, 77, 108, 225, 321, 335, 348, 419, 429, 459, 460, 477, 485 plane 10, 13, 90, 257, 450 space 14, 29, 44, 57, 64, 67, 90, 106, 107, 127, 128, 142, 254 vector(field) 10–12, 14, 15, 20, 34, 35, 46, 62, 64, 65, 75–77, 81, 82, 127–129, 143, 165, 218, 224, 227, 241, 256, 263, 264, 281, 291, 311, 316, 317, 328, 334, 335, 337, 339, 344, 347, 366, 440, 444, 464, 467, 474, 476, 477–479, 483, 484, 491 temperature 283, 285, 287–289, 330, 331, 357 anisotropy 290, 331 contrast 331 definition 232, 233 tensor(s) 13, 15, 16 associated mapping of 20, 21 -calculus 97, 98 -density 13, 17, 18 differentiation of 26 invariant- 75, 79 optical- 240, 244, 245, 246 parallel transport of 34, 39 -product 18, 28, 37, 39, 40, 80 -transformation linearised 155 see also under specific names, e.g. curvature tensor, Einstein tensor tetrad 97, 248, 323, 441 -components of a tensor 173, 174, 191, 194, 204, 207, 220, 244, 253, 267, 299, 323, 387, 430, 452, 456, 469 double-null- 97, 243, 245, 246, 250, 251, 441 -image of a tensor 96 -index/indices 243, 244, 442, 457 -metric 94, 244 null- 97 of vector fields 94 orthonormal- 97, 98, 142, 173, 204, 267, 299, 387, 430, 452, 456, 469 theorems, see under specific names, e.g. ‘Goldberg–Sachs theorem’ thermodynamical scheme 233, 397, 430 thermodynamics 222, 231–233, 290, 397 timelike coordinate 152, 193, 451 curve/line 63, 176, 201, 209, 211, 216, 271, 333, 345, 347, 414, 451, 462, 479, 481, 491 direction 212 geodesic 126, 127, 176, 194, 196, 200, 219, 221, 296, 311, 344, 346, 464, 466, 467, 471, 474, 483

533

hyper(surface) 105, 141, 313, 314, 333, 358, 364, 380, 475, 481, 485 infinity 211, 358 interval 61 relation 62 singularity 212, 216, 315, 333, 336, 353 vector(field) 62, 70, 72, 73, 142, 170–172, 204, 294, 333, 385, 444, 445, 448, 451, 461, 462, 469, 487 torsion tensor 30, 32, 38, 46, 49, 151 torsion-free manifold 36, 44–46, 51 trace (of a matrix/tensor) 17, 18, 58, 70, 72, 174, 241 trace-free/traceless matrix/tensor 118, 284 part of a tensor 58, 241 transitive -action of a group 105 multiply- 105, 109 simply- 105, 106, 110 orthogonally transitive spacetime 488 trapped surface 243 closed 243, 311 future- 243 past- 243, 282

underdensity 361 upper index 18, 19, 23, 24, 27, 238 limit of mass 321 tetrad index 244

vector 10 contravariant- 15 covariant- 16 current- 161 -field(s) 14 basis of 29 coordinates adapted to 47 invariant 106 Killing- 77 conformal- 86 mapping of 20 surface-forming- 81, 82 length of 49 normal- 65 null- 62 of angular momentum 160 of angular velocity 223 parallel- 10, 11 -space 14, 17, 113 spacelike- 62 tangent- 10, 14, 34, 35 timelike- 62 transport of 39, 40

534

Index

vector (cont.) wave- 238, 239 zero- 20 see also under specific names, e.g. eigenvector or Debever vector Virgo cluster 331 void 235, 289, 301–303, 308, 332, 337 weak-field approximation 140, 154, 156, 157 limit of relativity 447 weight of a tensor density 17, 18, 24, 26, 28, 30, 36, 37, 114, 133, 135

Weyl spinor 117 tensor 58, 60, 70, 71, 72, 121, 131, 206, 245, 396, 398, 399, 440, 458 algebraically special 246, 251 electric part of 71, 229 magnetic part of 70, 229, 396, 436 Petrov classification/types of 70, 245 principal spinors of 117 spinor image of 116, 120, 121 white hole 201 wormhole 296, 314, 321, 325, 404, 413, 414, 418, 419